diff --git a/CHANGELOG.md b/CHANGELOG.md
index a45ab8bfd..a255d323a 100644
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@@ -4,6 +4,9 @@ All notable changes to Bambuddy will be documented in this file.
 
 ## [0.2.5b1] - Unreleased
 
+### Fixed
+- **Finish photo no longer shows the bed already dropped (#1397, reported by @rtadams89, @Jeff-GebhartCA, @MA2ZAK)** — Bambu's end-gcode lowers the build plate as soon as the print completes. Bambuddy's existing finish-photo path captured a fresh camera frame at `gcode_state=FINISH`, by which time the bed was already at the bottom of the chamber — the photo showed the top of the print well below the camera's natural framing, badly framed and sometimes invisible. Earlier capture attempts (at `layer_num >= total_layer_num` while still RUNNING) hit motion-blur because the toolhead was still parking; capturing through the window kept the wrong frame because the latest was always ~2s before FINISH, mid-bed-drop. **The fix sources the photo from a brief Bambu timelapse Bambuddy records on every dispatched print instead.** Firmware stops timelapse recording AFTER the toolhead parks but BEFORE the bed-drop end-gcode runs, so the last frame frames the finished print correctly — verified on N=2 H2C prints by extracting the last frame of two real timelapses (`spoolbuddy_v2.1` and `case_SpoolBuddy`); both showed the print clearly with the toolhead parked off-frame upper-left and the bed at print height, no motion blur. The post-park-pre-drop window is at least ~2 seconds wide on both, so `-sseof -1.0` (seek to last second, skip the literal last frame) is safe against any encoder tail artifact. **Implementation: force-on at dispatch + cleanup after extraction.** `BackgroundDispatchService._resolve_effective_timelapse(db, archive, job)` reads the `capture_finish_photo` setting before each `start_print` call (reprint + library-file flows both wired) and, when the user did NOT opt in to timelapse for this print, overrides `timelapse=True` on the MQTT command + marks the new `PrintArchive.bambuddy_forced_timelapse` column True. User-opted-in timelapses pass through unchanged (no override needed). Migration adds the column branched on `is_sqlite()` for the boolean default (`DEFAULT 0` on SQLite, `DEFAULT FALSE` on Postgres — PG rejects `DEFAULT 0` for BOOLEAN). New module-level `extract_video_last_frame(video_path, output_path)` in `services/camera.py` runs a single `ffmpeg -sseof -1.0 -i <video> -frames:v 1 -q:v 2 -update 1 <out>` subprocess — no full transcode, ~150ms wall time on the dev box. Bounded 15s subprocess timeout that kills the child on hang. Returns False (never raises) on missing ffmpeg / missing video / non-zero exit / timeout. `_capture_finish_photo_from_timelapse(archive_id, archive_dir)` polls `archive.timelapse_path` every 3s for up to 60s — `_scan_for_timelapse_with_retries` runs in parallel and writes that field when the FTP download finishes. When it lands and the file exists on disk, extract the last frame as `finish_<timestamp>_<hex>.jpg`. `_background_finish_photo` now tries the timelapse path first when `timelapse_was_active=True` and no external camera is configured; the existing external-camera / buffered-live-frame / fresh-RTSP-capture chain stays in place as the fallback. **Post-extraction cleanup**: when `archive.bambuddy_forced_timelapse` is True, `_cleanup_forced_timelapse(archive_id, printer_id)` runs after the extractor (regardless of success — the user never asked for a timelapse file and we shouldn't leave debris even if ffmpeg failed): deletes the locally-attached file, clears `archive.timelapse_path`, then walks the four scanner directories (`/timelapse`, `/timelapse/video`, `/record`, `/recording`) trying FTP DELE against the original filename. Best-effort, never raises — a printer that's offline at cleanup time means one orphaned file on the SD card, not a broken Bambuddy flow. **Notification timing**: the photo-task wait_for budget bumps from 45s to 75s when a timelapse was active so the notification carries the correct bed-up photo instead of falling through to the live-cam grab on slow Wi-Fi links; ~30s of added notification latency at worst is the honest tradeoff. **Scope limitation, documented in the camera wiki**: only covers prints dispatched THROUGH Bambuddy (queue, reprint, print-now from File Manager). Prints started directly on the printer's touchscreen, via the Bambu Handy app, or via Bambu Studio's "Send" function bypass `background_dispatch.py`, so the force-on doesn't fire and the live-cam fallback (bed-down) still applies for those. Can add the mid-print `M981 S1 P20000` MQTT toggle in `on_print_start` later if anyone reports it for non-dispatched prints. External-camera users are unaffected throughout: their flow ignores the printer timelapse since external cams have their own framing and don't see one anyway. **Verified on H2C only** (core-XY); needs field verification on bed-slingers (A1, P1S) where the bed-drop kinematic geometry differs. Bed-slinger users invited to the test build to confirm. Setting description rewritten across all 11 locales to drop the "best quality when timelapse enabled" caveat (since Bambuddy now forces it) and call out the "kept-if-you-wanted-it, deleted-otherwise" behaviour. **Tests**: 6 in `test_extract_video_last_frame.py` cover the real ffmpeg happy path against a runtime-synthesised tiny MP4 (testsrc generator, ~3-5 KB, no committed binary fixture), missing source, empty source, ffmpeg-not-present (monkeypatched), nonzero-exit on garbage input, hung subprocess via patched-sleep-binary + tightened timeout. 4 in `test_finish_photo_from_timelapse.py` cover the polling helper with a patched-session fixture (no DB engine): timeout-without-landing, lands-and-extracts, lands-but-extraction-fails, file-materialises-mid-poll. Override + cleanup tests in `test_dispatch_force_timelapse.py` and `test_cleanup_forced_timelapse.py` pin: override fires only when `capture_finish_photo` enabled AND user-timelapse off; user-opted-in timelapse passes through unchanged; cleanup deletes local + clears `timelapse_path` + DELEs remote when forced; cleanup skips when not forced. **Round-2 fixes from field testing (Martin's H2D + X1C queue test)**: (a) the extractor's `-sseof -1.0` seek broke on small-print timelapses — Bambu records one frame per layer change, so a 16-layer cube produces a 0.625 s / 16-frame video and the 1-second seek-from-end went before the start of the file, ffmpeg silently returned frame 0 (empty bed at print start). Switched the extractor to `ffmpeg -i input.mp4 -update 1 -q:v 2 out.jpg` — writes every decoded frame to the same output file (overwriting), so the file left on disk is the last frame regardless of duration. Verified on Martin's actual X1C-2 timelapse: produces the finished red cube with toolhead parked upper-left. New `test_extracts_correctly_from_sub_second_video` regression test pins it against a 0.5 s synthetic MP4. (b) The dispatch-time override only wired into `background_dispatch.py` (Print Now / Reprint flows), but the print *queue* runs through a separate scheduler at `print_scheduler.py:_start_print` which calls `printer_manager.start_print` directly. Refactored the resolver to a module-level `resolve_effective_timelapse(db, archive, user_wanted_timelapse)` function and wired it into the scheduler's call site too. New `test_scheduler_force_timelapse_wiring.py` walks the scheduler's AST and asserts the `start_print(timelapse=...)` kwarg references `effective_timelapse` (not `item.timelapse`) — guards against future refactors silently dropping the override on the queue path.
+
 ### Added
 - **Add Printer: scan a custom subnet for printers behind a router on a different L3 segment (#1564, reported by @MartinNYHC, root-caused by @IndividualGhost1905)** — Reporter on a flat LAN couldn't add a printer that lived in a different subnet (`Bambuddy 192.168.1.0/24` ↔ `printer 10.1.1.0/24`). SSDP multicast (`239.255.255.250:2021`) doesn't traverse routers, so the existing "Discover Printers on Network" pass found nothing; Docker mode had a CIDR text input but only as a fallback when zero interface subnets were detected, and native mode had no subnet field at all. The discovery socket has always bound `INADDR_ANY` so this was never an interface-bind issue — only a routing-boundary one. The fix surfaces an always-visible subnet picker in `AddPrinterModal`: the detected interface subnets stay as the dropdown options, plus a new "Custom subnet..." sentinel reveals a CIDR text input the user can type any reachable subnet into (`10.1.1.0/24`, a VLAN, a Tailscale subnet route, etc.). When custom is picked, the discovery routes through `POST /discovery/scan` with the typed CIDR instead of `POST /discovery/start` — SSDP would no-op against a foreign subnet anyway, so this is the only behaviour that can succeed. The Scan-button label and the scanning / no-printers-found messages all key off the `(isDocker || useCustomSubnet)` predicate so the wording stays "Scan Subnet…" / "Scanning subnet…" — the user sees one consistent verbal model whether they're on Docker or just picked Custom. Last custom CIDR is persisted to `localStorage` under `bambuddy.discovery.customSubnet` and restored on next modal open, so a user who maintains a VLAN setup doesn't retype `10.1.1.0/24` every time. **Backend changes: none.** `SubnetScanner.scan_subnet()` already accepts any CIDR, already caps the scan at /22 (1024 hosts) with batch-50 concurrency, and the route `/discovery/scan` already takes user-supplied input — the existing plumbing was complete. **i18n**: 3 new keys (`customSubnetOption`, `customSubnetLabel`, `customSubnetNote`) translated in all 10 non-English locales (de/es/fr/it/ja/ko/pt-BR/tr/zh-CN/zh-TW), no English fallbacks per the project's hard rule. The note text spells out the routing-boundary requirement: "The FTP (990) and MQTT (8883) ports must be reachable across the routing boundary" — a user who can pick a subnet but whose firewall blocks 8883 will at least see why the scan came up empty. **Tests**: 3 new in `PrintersPageDiscoveryCustomSubnet.test.tsx` — picker renders on native installs (was Docker-gated before), picking Custom + entering a CIDR routes through `discoveryApi.startSubnetScan` not `startDiscovery` and persists the choice via `localStorage.setItem`, picker default (the detected interface subnet) still triggers SSDP via `startDiscovery`. `AddPrinterModal` exported from `PrintersPage.tsx` so the tests can mount it directly without round-tripping through the full page (same shape as `ProjectModal` for the #1642 tests).
 
diff --git a/backend/app/core/database.py b/backend/app/core/database.py
index 29294311d..3ff4be043 100644
--- a/backend/app/core/database.py
+++ b/backend/app/core/database.py
@@ -2040,6 +2040,19 @@ async def run_migrations(conn):
         "CREATE INDEX IF NOT EXISTS ix_print_archives_deleted_at ON print_archives (deleted_at)",
     )
 
+    # Migration: Add bambuddy_forced_timelapse to print_archives (#1397)
+    # Tracks prints where Bambuddy forced the firmware to record a timelapse
+    # so the finish-photo extractor could pull the post-park-pre-drop frame.
+    # The cleanup path uses this to delete the timelapse both locally and on
+    # the printer's SD after extraction — the user didn't opt in to a
+    # timelapse recording. Postgres rejects `DEFAULT 0` for BOOLEAN; SQLite
+    # accepts both 0/FALSE — branch the literal.
+    _bool_false_literal = "0" if is_sqlite() else "FALSE"
+    await _safe_execute(
+        conn,
+        f"ALTER TABLE print_archives ADD COLUMN bambuddy_forced_timelapse BOOLEAN DEFAULT {_bool_false_literal}",
+    )
+
     # Migration: Create smart_plug_energy_snapshots table (#941)
     # Hourly snapshots of each plug's lifetime counter, so date-range queries in
     # "total consumption" energy mode can compute (last - first) deltas.
diff --git a/backend/app/main.py b/backend/app/main.py
index a3132d0c6..da93b6ccf 100644
--- a/backend/app/main.py
+++ b/backend/app/main.py
@@ -8,6 +8,7 @@ import time
 from contextlib import asynccontextmanager
 from datetime import datetime, timedelta, timezone
 from logging.handlers import RotatingFileHandler
+from pathlib import Path
 from urllib.parse import urlparse
 
 from fastapi import FastAPI
@@ -3146,6 +3147,158 @@ async def _scan_for_timelapse_with_retries(archive_id: int, baseline_names: set[
     logger.warning("[TIMELAPSE] All attempts exhausted for archive %s, giving up", archive_id)
 
 
+# Defaults for the finish-photo-from-timelapse polling loop (#1397). These are
+# module-level so tests can monkeypatch them down to ~0 without timing out.
+_FINISH_PHOTO_TIMELAPSE_POLL_INTERVAL_SECONDS: float = 3.0
+_FINISH_PHOTO_TIMELAPSE_POLL_TIMEOUT_SECONDS: float = 60.0
+
+
+async def _capture_finish_photo_from_timelapse(
+    archive_id: int,
+    archive_dir: Path,
+) -> str | None:
+    """Wait for the per-print timelapse to land on the archive and extract its
+    last frame as the finish photo (#1397).
+
+    Bambu firmware stops timelapse recording after the toolhead parks but
+    before the bed-drop end-gcode runs, so the last frame frames the finished
+    print correctly. A live camera grab at gcode_state=FINISH captures the
+    bed already lowered.
+
+    ``_scan_for_timelapse_with_retries`` runs in parallel and writes
+    ``archive.timelapse_path`` when the file lands. This function polls for
+    that field. Returns the saved photo filename on success, or None if the
+    timelapse never arrives within the timeout / extraction fails / no
+    timelapse path was set — in which case the caller falls back to the
+    existing live-camera capture chain.
+    """
+    import uuid
+
+    from backend.app.models.archive import PrintArchive
+    from backend.app.services.camera import extract_video_last_frame
+
+    logger = logging.getLogger(__name__)
+
+    deadline = asyncio.get_event_loop().time() + _FINISH_PHOTO_TIMELAPSE_POLL_TIMEOUT_SECONDS
+    poll_interval = _FINISH_PHOTO_TIMELAPSE_POLL_INTERVAL_SECONDS
+
+    while True:
+        async with async_session() as db:
+            result = await db.execute(select(PrintArchive).where(PrintArchive.id == archive_id))
+            archive = result.scalar_one_or_none()
+            timelapse_relpath = archive.timelapse_path if archive else None
+
+        if timelapse_relpath:
+            video_path = app_settings.base_dir / timelapse_relpath
+            if video_path.exists() and video_path.stat().st_size > 0:
+                photos_dir = archive_dir / "photos"
+                photos_dir.mkdir(parents=True, exist_ok=True)
+                timestamp = datetime.now().strftime("%Y%m%d_%H%M%S")
+                filename = f"finish_{timestamp}_{uuid.uuid4().hex[:8]}.jpg"
+                output_path = photos_dir / filename
+                if await extract_video_last_frame(video_path, output_path):
+                    logger.info(
+                        "[PHOTO-BG] Extracted finish photo from timelapse %s for archive %s",
+                        video_path.name,
+                        archive_id,
+                    )
+                    return filename
+                logger.warning(
+                    "[PHOTO-BG] Timelapse %s landed but last-frame extraction failed for archive %s; falling back",
+                    video_path.name,
+                    archive_id,
+                )
+                return None
+
+        if asyncio.get_event_loop().time() >= deadline:
+            logger.info(
+                "[PHOTO-BG] Timelapse for archive %s didn't land within %.0fs; falling back to live camera",
+                archive_id,
+                _FINISH_PHOTO_TIMELAPSE_POLL_TIMEOUT_SECONDS,
+            )
+            return None
+
+        await asyncio.sleep(poll_interval)
+
+
+async def _cleanup_forced_timelapse(archive_id: int, printer_id: int) -> None:
+    """Delete the timelapse Bambuddy forced on for #1397's finish-photo path.
+
+    Called from the finish-photo background task after the extractor has had
+    its turn (regardless of whether extraction succeeded — the user never
+    asked for a video and we shouldn't leave one behind even if ffmpeg
+    failed). Cleanup is best-effort and never raises: a printer that's
+    offline at cleanup time means a single orphaned file on the SD card,
+    not a broken Bambuddy flow.
+
+    Cleans both:
+      - the locally-attached file (clears archive.timelapse_path)
+      - the printer-side file via FTP DELE
+    """
+    from backend.app.models.archive import PrintArchive
+    from backend.app.models.printer import Printer
+    from backend.app.services.bambu_ftp import delete_file_async
+
+    logger = logging.getLogger(__name__)
+
+    local_relpath: str | None = None
+    printer = None
+
+    async with async_session() as db:
+        archive_result = await db.execute(select(PrintArchive).where(PrintArchive.id == archive_id))
+        archive = archive_result.scalar_one_or_none()
+        if not archive or not archive.bambuddy_forced_timelapse:
+            return
+
+        local_relpath = archive.timelapse_path
+        if local_relpath:
+            local_abspath = app_settings.base_dir / local_relpath
+            try:
+                if local_abspath.exists():
+                    local_abspath.unlink()
+                    logger.info(
+                        "[FORCED-TIMELAPSE] Deleted local timelapse %s for archive %s",
+                        local_relpath,
+                        archive_id,
+                    )
+            except OSError as e:
+                logger.warning("[FORCED-TIMELAPSE] Could not delete local timelapse %s: %s", local_relpath, e)
+            archive.timelapse_path = None
+            await db.commit()
+
+        printer_result = await db.execute(select(Printer).where(Printer.id == printer_id))
+        printer = printer_result.scalar_one_or_none()
+
+    if printer is None or not local_relpath:
+        return
+
+    # _scan_for_timelapse_with_retries used the original filename when it
+    # attached, so the basename of timelapse_path matches the printer-side
+    # filename. Try the directories the scanner walks (#1397).
+    filename = Path(local_relpath).name
+    for remote_dir in ("/timelapse", "/timelapse/video", "/record", "/recording"):
+        remote_path = f"{remote_dir}/{filename}"
+        try:
+            ok = await delete_file_async(
+                printer.ip_address,
+                printer.access_code,
+                remote_path,
+                printer_model=printer.model,
+            )
+        except Exception as e:
+            logger.debug("[FORCED-TIMELAPSE] FTP delete attempt failed for %s: %s", remote_path, e)
+            continue
+        if ok:
+            logger.info("[FORCED-TIMELAPSE] Deleted printer-side timelapse %s", remote_path)
+            return
+
+    logger.warning(
+        "[FORCED-TIMELAPSE] Could not delete printer-side timelapse %s for archive %s (file may already be gone)",
+        filename,
+        archive_id,
+    )
+
+
 async def on_print_running_observed(printer_id: int, data: dict):
     """Restart-recovery: capture a fresh timelapse baseline for a print that
     started before Bambuddy came up.
@@ -4119,54 +4272,72 @@ async def on_print_complete(printer_id: int, data: dict):
                                 archive_dir = app_settings.archive_dir / str(archive.id)
                             photo_filename = None
 
-                            # Check for external camera first
-                            if printer.external_camera_enabled and printer.external_camera_url:
-                                logger.info("[PHOTO-BG] Using external camera")
-                                from backend.app.services.external_camera import capture_frame
+                            # Prefer the timelapse last-frame source when a timelapse was
+                            # recording — it captures the moment after the toolhead parks
+                            # but before the bed drops, which the live-camera grab below
+                            # would miss (#1397). Skipped for external cameras (those have
+                            # their own framing and don't see a Bambu timelapse).
+                            prefer_timelapse_source = bool(data.get("timelapse_was_active")) and not (
+                                printer.external_camera_enabled and printer.external_camera_url
+                            )
 
-                                frame_data = await capture_frame(
-                                    printer.external_camera_url,
-                                    printer.external_camera_type or "mjpeg",
-                                    snapshot_url=printer.external_camera_snapshot_url,
+                            if prefer_timelapse_source:
+                                photo_filename = await _capture_finish_photo_from_timelapse(
+                                    archive_id=archive_id,
+                                    archive_dir=archive_dir,
                                 )
-                                if frame_data:
-                                    photos_dir = archive_dir / "photos"
-                                    photos_dir.mkdir(parents=True, exist_ok=True)
-                                    timestamp = datetime.now().strftime("%Y%m%d_%H%M%S")
-                                    photo_filename = f"finish_{timestamp}_{uuid.uuid4().hex[:8]}.jpg"
-                                    photo_path = photos_dir / photo_filename
-                                    await asyncio.to_thread(photo_path.write_bytes, frame_data)
-                                    logger.info("[PHOTO-BG] Saved external camera frame: %s", photo_filename)
-                            else:
-                                # Check if camera stream is active - use buffered frame to avoid freeze
-                                # Check both RTSP streams (_active_streams) and chamber image streams (_active_chamber_streams)
-                                active_for_printer = [k for k in _active_streams if k.startswith(f"{printer_id}-")]
-                                active_chamber_for_printer = [
-                                    k for k in _active_chamber_streams if k.startswith(f"{printer_id}-")
-                                ]
-                                buffered_frame = get_buffered_frame(printer_id)
 
-                                if (active_for_printer or active_chamber_for_printer) and buffered_frame:
-                                    # Use frame from active stream
-                                    logger.info("[PHOTO-BG] Using buffered frame from active stream")
-                                    photos_dir = archive_dir / "photos"
-                                    photos_dir.mkdir(parents=True, exist_ok=True)
-                                    timestamp = datetime.now().strftime("%Y%m%d_%H%M%S")
-                                    photo_filename = f"finish_{timestamp}_{uuid.uuid4().hex[:8]}.jpg"
-                                    photo_path = photos_dir / photo_filename
-                                    await asyncio.to_thread(photo_path.write_bytes, buffered_frame)
-                                    logger.info("[PHOTO-BG] Saved buffered frame: %s", photo_filename)
-                                else:
-                                    # No active stream - capture new frame
-                                    from backend.app.services.camera import capture_finish_photo
+                            # Fallback chain: external camera → buffered live frame →
+                            # fresh RTSP capture. Only runs if the timelapse path above
+                            # didn't already produce a photo.
+                            if not photo_filename:
+                                if printer.external_camera_enabled and printer.external_camera_url:
+                                    logger.info("[PHOTO-BG] Using external camera")
+                                    from backend.app.services.external_camera import capture_frame
 
-                                    photo_filename = await capture_finish_photo(
-                                        printer_id=printer_id,
-                                        ip_address=printer.ip_address,
-                                        access_code=printer.access_code,
-                                        model=printer.model,
-                                        archive_dir=archive_dir,
+                                    frame_data = await capture_frame(
+                                        printer.external_camera_url,
+                                        printer.external_camera_type or "mjpeg",
+                                        snapshot_url=printer.external_camera_snapshot_url,
                                     )
+                                    if frame_data:
+                                        photos_dir = archive_dir / "photos"
+                                        photos_dir.mkdir(parents=True, exist_ok=True)
+                                        timestamp = datetime.now().strftime("%Y%m%d_%H%M%S")
+                                        photo_filename = f"finish_{timestamp}_{uuid.uuid4().hex[:8]}.jpg"
+                                        photo_path = photos_dir / photo_filename
+                                        await asyncio.to_thread(photo_path.write_bytes, frame_data)
+                                        logger.info("[PHOTO-BG] Saved external camera frame: %s", photo_filename)
+                                else:
+                                    # Check if camera stream is active - use buffered frame to avoid freeze
+                                    # Check both RTSP streams (_active_streams) and chamber image streams (_active_chamber_streams)
+                                    active_for_printer = [k for k in _active_streams if k.startswith(f"{printer_id}-")]
+                                    active_chamber_for_printer = [
+                                        k for k in _active_chamber_streams if k.startswith(f"{printer_id}-")
+                                    ]
+                                    buffered_frame = get_buffered_frame(printer_id)
+
+                                    if (active_for_printer or active_chamber_for_printer) and buffered_frame:
+                                        # Use frame from active stream
+                                        logger.info("[PHOTO-BG] Using buffered frame from active stream")
+                                        photos_dir = archive_dir / "photos"
+                                        photos_dir.mkdir(parents=True, exist_ok=True)
+                                        timestamp = datetime.now().strftime("%Y%m%d_%H%M%S")
+                                        photo_filename = f"finish_{timestamp}_{uuid.uuid4().hex[:8]}.jpg"
+                                        photo_path = photos_dir / photo_filename
+                                        await asyncio.to_thread(photo_path.write_bytes, buffered_frame)
+                                        logger.info("[PHOTO-BG] Saved buffered frame: %s", photo_filename)
+                                    else:
+                                        # No active stream - capture new frame
+                                        from backend.app.services.camera import capture_finish_photo
+
+                                        photo_filename = await capture_finish_photo(
+                                            printer_id=printer_id,
+                                            ip_address=printer.ip_address,
+                                            access_code=printer.access_code,
+                                            model=printer.model,
+                                            archive_dir=archive_dir,
+                                        )
 
                             if photo_filename:
                                 photos = archive.photos or []
@@ -4174,6 +4345,18 @@ async def on_print_complete(printer_id: int, data: dict):
                                 archive.photos = photos
                                 await db.commit()
                                 logger.info("[PHOTO-BG] Saved: %s", photo_filename)
+
+                            # When Bambuddy forced timelapse on for this print, delete
+                            # the timelapse afterward (#1397). The user didn't ask for
+                            # a video to keep — only the finish photo. Runs even when
+                            # photo extraction failed, so we don't leave debris.
+                            if archive.bambuddy_forced_timelapse:
+                                await _cleanup_forced_timelapse(
+                                    archive_id=archive_id,
+                                    printer_id=printer_id,
+                                )
+
+                            if photo_filename:
                                 return photo_filename
             return None
         except Exception as e:
@@ -4364,15 +4547,24 @@ async def on_print_complete(printer_id: int, data: dict):
     asyncio.create_task(_background_smart_plug())
     asyncio.create_task(_background_maintenance_check())
 
-    # Notification task waits for photo capture to complete first (with timeout)
+    # Notification task waits for photo capture to complete first (with timeout).
+    # When a timelapse was recording, photo sourcing polls the per-print
+    # timelapse for up to 60s (#1397) — extend the budget so the notification
+    # carries the correct bed-up photo instead of falling through to the
+    # live-cam grab. Adds ~30s of notification latency at worst on slow links.
+    photo_wait_timeout = 75 if data.get("timelapse_was_active") else 45
+
     async def _photo_then_notify():
         """Wait for photo capture, then send notification with photo URL."""
         finish_photo = None
         try:
-            finish_photo = await asyncio.wait_for(photo_task, timeout=45)
+            finish_photo = await asyncio.wait_for(photo_task, timeout=photo_wait_timeout)
             logger.info("[PHOTO-NOTIFY] Photo task returned: %s", finish_photo)
         except TimeoutError:
-            logger.warning("[PHOTO-NOTIFY] Photo capture timed out after 45s, sending notification without photo")
+            logger.warning(
+                "[PHOTO-NOTIFY] Photo capture timed out after %ss, sending notification without photo",
+                photo_wait_timeout,
+            )
         except Exception as e:
             logger.warning("[PHOTO-NOTIFY] Photo task failed: %s", e)
         try:
diff --git a/backend/app/models/archive.py b/backend/app/models/archive.py
index fd0e1436e..e73903293 100644
--- a/backend/app/models/archive.py
+++ b/backend/app/models/archive.py
@@ -20,6 +20,12 @@ class PrintArchive(Base):
     content_hash: Mapped[str | None] = mapped_column(String(64))  # SHA256 hash for duplicate detection
     thumbnail_path: Mapped[str | None] = mapped_column(String(500))
     timelapse_path: Mapped[str | None] = mapped_column(String(500))
+    # True when Bambuddy forced timelapse recording on for this print so the
+    # finish-photo extractor (#1397) could pull the post-park-pre-drop frame.
+    # The cleanup path uses this to know the timelapse should be deleted
+    # both locally and on the printer's SD after extraction — the user
+    # didn't opt in to a timelapse recording.
+    bambuddy_forced_timelapse: Mapped[bool] = mapped_column(Boolean, default=False, server_default="0")
     source_3mf_path: Mapped[str | None] = mapped_column(String(500))  # Original project 3MF from slicer
     f3d_path: Mapped[str | None] = mapped_column(String(500))  # Fusion 360 design file
 
diff --git a/backend/app/schemas/settings.py b/backend/app/schemas/settings.py
index e7274ad75..798288730 100644
--- a/backend/app/schemas/settings.py
+++ b/backend/app/schemas/settings.py
@@ -9,7 +9,13 @@ class AppSettings(BaseModel):
     auto_archive: bool = Field(default=True, description="Automatically archive prints when completed")
     save_thumbnails: bool = Field(default=True, description="Extract and save preview images from 3MF files")
     capture_finish_photo: bool = Field(
-        default=True, description="Capture photo from printer camera when print completes"
+        default=True,
+        description=(
+            "Capture photo from printer camera when print completes. Bambuddy records a "
+            "brief timelapse during the print so the photo can be sourced from the moment "
+            "before the bed drops; the timelapse file is kept if you enabled timelapse for "
+            "this print, otherwise it is deleted automatically after the photo is captured."
+        ),
     )
     default_filament_cost: float = Field(default=25.0, description="Default filament cost per kg")
     currency: str = Field(default="USD", description="Currency for cost tracking")
diff --git a/backend/app/services/background_dispatch.py b/backend/app/services/background_dispatch.py
index 8b8020eb1..fb9b8fc9c 100644
--- a/backend/app/services/background_dispatch.py
+++ b/backend/app/services/background_dispatch.py
@@ -492,6 +492,17 @@ class BackgroundDispatchService:
         if self._is_cancel_requested(job.id):
             raise DispatchJobCancelled(f"Dispatch job {job.id} cancelled")
 
+    async def _resolve_effective_timelapse(self, db, archive, job: PrintDispatchJob) -> bool:
+        """Dispatch-flow wrapper around the shared resolver (#1397).
+
+        Returns the effective value to pass to ``start_print(timelapse=...)``.
+        """
+        return await resolve_effective_timelapse(
+            db,
+            archive,
+            user_wanted_timelapse=bool(job.options.get("timelapse", False)),
+        )
+
     def _build_state_payload_unlocked(self, recent_event: dict[str, Any] | None = None) -> dict[str, Any]:
         processing = len(self._active_jobs)
         dispatched = len(self._queued_jobs)
@@ -666,13 +677,15 @@ class BackgroundDispatchService:
 
                 self._raise_if_cancel_requested(job)
 
+                effective_timelapse = await self._resolve_effective_timelapse(db, archive, job)
+
                 await self._set_active_message(job, f"Starting print on {printer_name}...")
                 started = printer_manager.start_print(
                     job.printer_id,
                     remote_filename,
                     plate_id,
                     ams_mapping=job.options.get("ams_mapping"),
-                    timelapse=job.options.get("timelapse", False),
+                    timelapse=effective_timelapse,
                     bed_levelling=job.options.get("bed_levelling", True),
                     flow_cali=job.options.get("flow_cali", False),
                     vibration_cali=job.options.get("vibration_cali", True),
@@ -864,13 +877,15 @@ class BackgroundDispatchService:
 
                 self._raise_if_cancel_requested(job)
 
+                effective_timelapse = await self._resolve_effective_timelapse(db, archive, job)
+
                 await self._set_active_message(job, f"Starting print on {printer_name}...")
                 started = printer_manager.start_print(
                     job.printer_id,
                     remote_filename,
                     plate_id,
                     ams_mapping=job.options.get("ams_mapping"),
-                    timelapse=job.options.get("timelapse", False),
+                    timelapse=effective_timelapse,
                     bed_levelling=job.options.get("bed_levelling", True),
                     flow_cali=job.options.get("flow_cali", False),
                     vibration_cali=job.options.get("vibration_cali", True),
@@ -1077,4 +1092,41 @@ class BackgroundDispatchService:
         return lower.endswith(".gcode") or lower.endswith(".gcode.3mf")
 
 
+async def resolve_effective_timelapse(db, archive, user_wanted_timelapse: bool) -> bool:
+    """Resolve whether this print should record a timelapse (#1397).
+
+    Shared by both the on-demand dispatch path (``background_dispatch.py``,
+    used by Print Now / Reprint flows) and the queued-dispatch path
+    (``print_scheduler.py``, used by the print queue). Both must apply the
+    same override semantics or the queue path's prints would slip through
+    without a finish photo.
+
+    Bambuddy forces timelapse recording on when:
+      - the global ``capture_finish_photo`` setting is enabled, AND
+      - the user did NOT opt in to a timelapse for this specific print
+
+    The forced bit is recorded on the archive so the post-extraction
+    cleanup path can delete the timelapse afterward (the user didn't
+    ask for a video to keep, only the framed finish photo, #1397).
+    """
+    from backend.app.api.routes.settings import get_setting
+
+    if user_wanted_timelapse:
+        return True
+
+    # User didn't ask — check the master capture-finish-photo toggle.
+    capture_setting = await get_setting(db, "capture_finish_photo")
+    capture_enabled = capture_setting is None or capture_setting.lower() == "true"
+    if not capture_enabled:
+        return False
+
+    archive.bambuddy_forced_timelapse = True
+    await db.commit()
+    logging.getLogger(__name__).info(
+        "[FORCED-TIMELAPSE] Forcing timelapse on for archive %s (capture_finish_photo enabled, user did not opt in)",
+        archive.id,
+    )
+    return True
+
+
 background_dispatch = BackgroundDispatchService()
diff --git a/backend/app/services/camera.py b/backend/app/services/camera.py
index 427b608c5..739f7ce5d 100644
--- a/backend/app/services/camera.py
+++ b/backend/app/services/camera.py
@@ -625,6 +625,84 @@ async def capture_camera_frame_bytes(
         await proxy_server.wait_closed()
 
 
+async def extract_video_last_frame(video_path: Path, output_path: Path) -> bool:
+    """Extract the last frame of `video_path` as JPEG at `output_path`.
+
+    Used to source finish photos from a Bambu timelapse. The Bambu firmware
+    stops timelapse recording AFTER the toolhead parks but BEFORE the bed-drop
+    end-gcode runs, so the last frame frames the finished print correctly.
+    A live camera grab at `gcode_state=FINISH` captures the bed already
+    lowered (#1397).
+
+    Implementation: ``-update 1`` writes each decoded frame to the same
+    output file (overwriting), so the file left on disk after ffmpeg
+    finishes is the LAST frame. This works regardless of how short the
+    video is — a small print's timelapse can be sub-second / sub-30 frames
+    (one frame per layer-change capture), and the earlier ``-sseof -1.0``
+    approach failed there because the seek went before the start of the
+    file and ffmpeg silently returned frame 0 (empty bed at print start).
+    Decoding every frame is fine: Bambu timelapses are short by
+    construction (<1 minute even on hours-long prints).
+
+    Returns False on missing ffmpeg, missing video, subprocess failure or
+    timeout. Never raises.
+    """
+    ffmpeg = get_ffmpeg_path()
+    if not ffmpeg:
+        logger.warning("Cannot extract video last frame: ffmpeg not available")
+        return False
+
+    if not video_path.exists() or video_path.stat().st_size == 0:
+        logger.warning("Cannot extract last frame: %s missing or empty", video_path)
+        return False
+
+    output_path.parent.mkdir(parents=True, exist_ok=True)
+
+    cmd = [
+        ffmpeg,
+        "-y",
+        "-i",
+        str(video_path),
+        "-q:v",
+        "2",
+        "-update",
+        "1",
+        str(output_path),
+    ]
+
+    process = None
+    try:
+        process = await asyncio.create_subprocess_exec(
+            *cmd,
+            stdout=asyncio.subprocess.PIPE,
+            stderr=asyncio.subprocess.PIPE,
+        )
+        _, stderr = await asyncio.wait_for(process.communicate(), timeout=15.0)
+        if process.returncode != 0:
+            logger.warning(
+                "ffmpeg failed extracting last frame from %s: %s",
+                video_path,
+                stderr.decode(errors="replace")[:500],
+            )
+            return False
+        if not output_path.exists() or output_path.stat().st_size == 0:
+            logger.warning("ffmpeg produced no output for %s", video_path)
+            return False
+        return True
+    except asyncio.TimeoutError:
+        logger.warning("ffmpeg timed out extracting last frame from %s", video_path)
+        if process is not None:
+            try:
+                process.kill()
+                await process.wait()
+            except ProcessLookupError:
+                pass  # Already exited
+        return False
+    except OSError as e:
+        logger.warning("ffmpeg subprocess error for %s: %s", video_path, e)
+        return False
+
+
 async def capture_finish_photo(
     printer_id: int,
     ip_address: str,
diff --git a/backend/app/services/print_scheduler.py b/backend/app/services/print_scheduler.py
index 5fb5073c5..db6d519c0 100644
--- a/backend/app/services/print_scheduler.py
+++ b/backend/app/services/print_scheduler.py
@@ -2142,6 +2142,22 @@ class PrintScheduler:
         pre_subtask_id = getattr(pre_status, "subtask_id", None) if pre_status else None
         pre_gcode_file = getattr(pre_status, "gcode_file", None) if pre_status else None
 
+        # #1397: force timelapse on when capture_finish_photo is enabled so
+        # the finish-photo extractor has something to pull from. Same override
+        # semantics as background_dispatch.py — both queue paths must apply
+        # the same rule or queued prints slip through without a finish photo.
+        # When archive_print failed (library_file path, line 1968 except), we
+        # have no archive to mark — fall back to the literal user choice; the
+        # downstream finish-photo path can't run without an archive anyway.
+        if archive is not None:
+            from backend.app.services.background_dispatch import resolve_effective_timelapse
+
+            effective_timelapse = await resolve_effective_timelapse(
+                db, archive, user_wanted_timelapse=bool(item.timelapse)
+            )
+        else:
+            effective_timelapse = bool(item.timelapse)
+
         # Start the print with AMS mapping, plate_id and print options
         started = printer_manager.start_print(
             item.printer_id,
@@ -2152,7 +2168,7 @@ class PrintScheduler:
             flow_cali=item.flow_cali,
             vibration_cali=item.vibration_cali,
             layer_inspect=item.layer_inspect,
-            timelapse=item.timelapse,
+            timelapse=effective_timelapse,
             use_ams=item.use_ams,
         )
 
diff --git a/backend/tests/unit/services/test_background_dispatch.py b/backend/tests/unit/services/test_background_dispatch.py
index 8bd2fa534..663126507 100644
--- a/backend/tests/unit/services/test_background_dispatch.py
+++ b/backend/tests/unit/services/test_background_dispatch.py
@@ -231,7 +231,12 @@ def test_dispatch_option_defaults_align_with_request_schema_defaults():
     from backend.app.schemas.library import FilePrintRequest
     from backend.app.services import background_dispatch as bd
 
-    fields = ("bed_levelling", "flow_cali", "vibration_cali", "layer_inspect", "timelapse", "use_ams")
+    # `timelapse` deliberately excluded — the dispatcher now resolves it via
+    # ``_resolve_effective_timelapse`` so the value passed to ``start_print``
+    # depends on the ``capture_finish_photo`` setting + ``bambuddy_forced_timelapse``
+    # column (#1397). The original literal `job.options.get("timelapse", False)`
+    # pattern no longer appears.
+    fields = ("bed_levelling", "flow_cali", "vibration_cali", "layer_inspect", "use_ams")
     reprint_defaults = {f: getattr(ReprintRequest(), f) for f in fields}
     libprint_defaults = {f: getattr(FilePrintRequest(), f) for f in fields}
     assert reprint_defaults == libprint_defaults, (
diff --git a/backend/tests/unit/services/test_background_dispatch_watchdog.py b/backend/tests/unit/services/test_background_dispatch_watchdog.py
index f800e25f5..4bd366a93 100644
--- a/backend/tests/unit/services/test_background_dispatch_watchdog.py
+++ b/backend/tests/unit/services/test_background_dispatch_watchdog.py
@@ -606,6 +606,14 @@ class TestReprintArchiveDispatchWiring:
                 new_callable=AsyncMock,
             ),
             patch("backend.app.main.register_expected_print"),
+            # #1397: _resolve_effective_timelapse touches DB + setting layer
+            # that this watchdog-focused test isn't equipped to mock. Stub
+            # the whole helper so the dispatch flow proceeds unaffected.
+            patch.object(
+                BackgroundDispatchService,
+                "_resolve_effective_timelapse",
+                new=AsyncMock(return_value=False),
+            ),
             pytest.raises(RuntimeError, match="did not acknowledge print command"),
         ):
             await service._run_reprint_archive(job)
@@ -674,6 +682,14 @@ class TestReprintArchiveDispatchWiring:
                 new_callable=AsyncMock,
             ),
             patch("backend.app.main.register_expected_print"),
+            # #1397: _resolve_effective_timelapse touches DB + setting layer
+            # that this watchdog-focused test isn't equipped to mock. Stub
+            # the whole helper so the dispatch flow proceeds unaffected.
+            patch.object(
+                BackgroundDispatchService,
+                "_resolve_effective_timelapse",
+                new=AsyncMock(return_value=False),
+            ),
         ):
             await service._run_reprint_archive(job)  # must not raise
 
diff --git a/backend/tests/unit/services/test_dispatch_force_timelapse.py b/backend/tests/unit/services/test_dispatch_force_timelapse.py
new file mode 100644
index 000000000..b43abf0cc
--- /dev/null
+++ b/backend/tests/unit/services/test_dispatch_force_timelapse.py
@@ -0,0 +1,156 @@
+"""Tests for _resolve_effective_timelapse (#1397).
+
+Bambuddy forces timelapse recording on at dispatch time when the
+capture_finish_photo setting is enabled and the user did not opt in
+to timelapse for the specific print. The forced bit is recorded on
+the archive so the post-extraction cleanup path can delete the file.
+
+These tests exercise the four decision shapes the helper has to handle:
+
+  1. capture_finish_photo OFF → no override regardless of user choice
+  2. capture_finish_photo ON, user chose timelapse → no override (the
+     user's choice already covers the photo path)
+  3. capture_finish_photo ON, user chose NO timelapse → override to ON,
+     mark archive.bambuddy_forced_timelapse=True
+  4. capture_finish_photo unset (None / missing) → defaults to ON, so
+     the same override applies as case 3
+"""
+
+from types import SimpleNamespace
+from unittest.mock import AsyncMock, patch
+
+import pytest
+
+from backend.app.services.background_dispatch import (
+    BackgroundDispatchService,
+    PrintDispatchJob,
+)
+
+
+def _make_job(timelapse: bool | None) -> PrintDispatchJob:
+    """Mint a job with the smallest valid shape — the only field
+    _resolve_effective_timelapse reads from job is `options`."""
+    return PrintDispatchJob(
+        id=1,
+        kind="print_library_file",
+        source_id=42,
+        source_name="test.gcode.3mf",
+        printer_id=10,
+        printer_name="Printer A",
+        options={"timelapse": timelapse} if timelapse is not None else {},
+    )
+
+
+def _make_archive() -> SimpleNamespace:
+    """Stand-in archive object; the helper only touches .id and
+    .bambuddy_forced_timelapse."""
+    return SimpleNamespace(id=99, bambuddy_forced_timelapse=False)
+
+
+def _make_db() -> AsyncMock:
+    """Fake db with a no-op .commit()."""
+    db = AsyncMock()
+    return db
+
+
+@pytest.mark.asyncio
+async def test_capture_finish_photo_off_means_no_override():
+    """Master toggle off → user's timelapse=False stays False, no flag set."""
+    service = BackgroundDispatchService()
+    archive = _make_archive()
+    db = _make_db()
+    job = _make_job(timelapse=False)
+
+    with patch(
+        "backend.app.api.routes.settings.get_setting",
+        new=AsyncMock(return_value="false"),
+    ):
+        effective = await service._resolve_effective_timelapse(db, archive, job)
+
+    assert effective is False
+    assert archive.bambuddy_forced_timelapse is False
+    db.commit.assert_not_awaited()
+
+
+@pytest.mark.asyncio
+async def test_user_opted_in_passes_through_unchanged():
+    """User asked for a timelapse → no override needed (their normal flow
+    already records one). bambuddy_forced_timelapse stays False so cleanup
+    leaves the file alone."""
+    service = BackgroundDispatchService()
+    archive = _make_archive()
+    db = _make_db()
+    job = _make_job(timelapse=True)
+
+    # get_setting shouldn't even be consulted — but if it is, no override
+    # should still fire.
+    with patch(
+        "backend.app.api.routes.settings.get_setting",
+        new=AsyncMock(return_value="true"),
+    ):
+        effective = await service._resolve_effective_timelapse(db, archive, job)
+
+    assert effective is True
+    assert archive.bambuddy_forced_timelapse is False
+    db.commit.assert_not_awaited()
+
+
+@pytest.mark.asyncio
+async def test_capture_on_user_off_forces_timelapse_and_marks_flag():
+    """The whole point of the fix: capture_finish_photo=on + user-timelapse=off
+    flips the MQTT command to timelapse=True and marks the archive for
+    post-extraction cleanup."""
+    service = BackgroundDispatchService()
+    archive = _make_archive()
+    db = _make_db()
+    job = _make_job(timelapse=False)
+
+    with patch(
+        "backend.app.api.routes.settings.get_setting",
+        new=AsyncMock(return_value="true"),
+    ):
+        effective = await service._resolve_effective_timelapse(db, archive, job)
+
+    assert effective is True
+    assert archive.bambuddy_forced_timelapse is True
+    db.commit.assert_awaited_once()
+
+
+@pytest.mark.asyncio
+async def test_capture_finish_photo_unset_defaults_to_enabled():
+    """Setting absent from DB → default is True (per the Field default in the
+    schema), so the override fires just like when explicitly enabled."""
+    service = BackgroundDispatchService()
+    archive = _make_archive()
+    db = _make_db()
+    job = _make_job(timelapse=False)
+
+    with patch(
+        "backend.app.api.routes.settings.get_setting",
+        new=AsyncMock(return_value=None),
+    ):
+        effective = await service._resolve_effective_timelapse(db, archive, job)
+
+    assert effective is True
+    assert archive.bambuddy_forced_timelapse is True
+    db.commit.assert_awaited_once()
+
+
+@pytest.mark.asyncio
+async def test_user_missing_timelapse_treated_as_false():
+    """Some queue paths pass options without a timelapse key. Treat absent
+    as False (matches existing job.options.get('timelapse', False) default
+    that the caller previously used)."""
+    service = BackgroundDispatchService()
+    archive = _make_archive()
+    db = _make_db()
+    job = _make_job(timelapse=None)  # falls through to {}
+
+    with patch(
+        "backend.app.api.routes.settings.get_setting",
+        new=AsyncMock(return_value="true"),
+    ):
+        effective = await service._resolve_effective_timelapse(db, archive, job)
+
+    assert effective is True
+    assert archive.bambuddy_forced_timelapse is True
diff --git a/backend/tests/unit/test_cleanup_forced_timelapse.py b/backend/tests/unit/test_cleanup_forced_timelapse.py
new file mode 100644
index 000000000..1745661bc
--- /dev/null
+++ b/backend/tests/unit/test_cleanup_forced_timelapse.py
@@ -0,0 +1,205 @@
+"""Tests for _cleanup_forced_timelapse (#1397).
+
+When Bambuddy forced timelapse on for the finish-photo path, this helper
+runs after the extractor (success OR failure — we never leave debris).
+It deletes:
+  - the locally-attached file (clears archive.timelapse_path)
+  - the printer-side file via FTP DELE, walking the four scanner dirs
+
+These tests pin the four branches:
+
+  1. archive doesn't exist → no-op
+  2. archive exists but bambuddy_forced_timelapse=False → no-op (user wanted
+     the timelapse)
+  3. archive exists, forced=True, local file present → delete local + DB
+     update + FTP DELE on the first directory that succeeds
+  4. archive exists, forced=True, but FTP DELE fails on every dir → local
+     side still cleaned up; warn log emitted (best-effort)
+"""
+
+from pathlib import Path
+from types import SimpleNamespace
+from unittest.mock import AsyncMock, patch
+
+import pytest
+
+from backend.app import main as main_module
+from backend.app.main import _cleanup_forced_timelapse
+
+
+def _fake_session_factory(rows: dict):
+    """Return an async_session() replacement that yields the given rows.
+
+    `rows` is a mapping of model -> object that the test wants returned
+    from `db.execute(select(...)).scalar_one_or_none()`. The select
+    target is detected by walking the column descriptions — for these
+    tests we just look at the model class name.
+    """
+    from contextlib import asynccontextmanager
+
+    @asynccontextmanager
+    async def fake_session():
+        async def execute(stmt):
+            # The select(...) statement carries the target entity in
+            # `stmt.column_descriptions[0]["entity"]`. Match by class name.
+            target_name = stmt.column_descriptions[0]["entity"].__name__
+            row = rows.get(target_name)
+            return SimpleNamespace(scalar_one_or_none=lambda: row)
+
+        commits: list[None] = []
+
+        async def commit():
+            commits.append(None)
+
+        yield SimpleNamespace(execute=execute, commit=commit, _commits=commits)
+
+    return fake_session
+
+
+@pytest.fixture(autouse=True)
+def patch_app_settings(monkeypatch, tmp_path):
+    """Point base_dir at a tmp_path so the helper can resolve relative
+    timelapse paths against a real fs we control."""
+    monkeypatch.setattr(main_module.app_settings, "base_dir", tmp_path)
+    return tmp_path
+
+
+@pytest.mark.asyncio
+async def test_no_archive_is_noop(monkeypatch):
+    """Archive deleted between print start and cleanup? Don't crash."""
+    monkeypatch.setattr(main_module, "async_session", _fake_session_factory({"PrintArchive": None, "Printer": None}))
+    delete_mock = AsyncMock()
+    with patch("backend.app.services.bambu_ftp.delete_file_async", new=delete_mock):
+        await _cleanup_forced_timelapse(archive_id=99, printer_id=10)
+    delete_mock.assert_not_awaited()
+
+
+@pytest.mark.asyncio
+async def test_not_forced_is_noop(monkeypatch, tmp_path):
+    """User wanted a timelapse → don't delete anything."""
+    archive = SimpleNamespace(
+        bambuddy_forced_timelapse=False,
+        timelapse_path="archive/1/timelapse.mp4",
+    )
+    monkeypatch.setattr(
+        main_module,
+        "async_session",
+        _fake_session_factory({"PrintArchive": archive, "Printer": None}),
+    )
+
+    # Lay down a real file so we'd detect a stray delete.
+    video_path = tmp_path / archive.timelapse_path
+    video_path.parent.mkdir(parents=True, exist_ok=True)
+    video_path.write_bytes(b"x" * 100)
+
+    delete_mock = AsyncMock(return_value=True)
+    with patch("backend.app.services.bambu_ftp.delete_file_async", new=delete_mock):
+        await _cleanup_forced_timelapse(archive_id=99, printer_id=10)
+
+    delete_mock.assert_not_awaited()
+    assert video_path.exists()
+    # archive.timelapse_path is untouched — we still have the user's video
+    # tracked correctly.
+    assert archive.timelapse_path == "archive/1/timelapse.mp4"
+
+
+@pytest.mark.asyncio
+async def test_forced_deletes_local_and_remote(monkeypatch, tmp_path):
+    """Happy path: forced=True → local file unlinked, DB row cleared, FTP
+    DELE called against /timelapse/<filename> (the first dir to succeed)."""
+    archive = SimpleNamespace(
+        bambuddy_forced_timelapse=True,
+        timelapse_path="archive/1/myprint.mp4",
+    )
+    printer = SimpleNamespace(ip_address="10.0.0.5", access_code="12345678", model="O1C")
+    monkeypatch.setattr(
+        main_module,
+        "async_session",
+        _fake_session_factory({"PrintArchive": archive, "Printer": printer}),
+    )
+
+    video_path = tmp_path / archive.timelapse_path
+    video_path.parent.mkdir(parents=True, exist_ok=True)
+    video_path.write_bytes(b"x" * 100)
+
+    # FTP DELE succeeds on the first directory we try.
+    delete_mock = AsyncMock(return_value=True)
+    with patch("backend.app.services.bambu_ftp.delete_file_async", new=delete_mock):
+        await _cleanup_forced_timelapse(archive_id=99, printer_id=10)
+
+    # Local side: file gone, DB cleared.
+    assert not video_path.exists()
+    assert archive.timelapse_path is None
+    # Remote side: DELE'd against /timelapse/myprint.mp4 — that's the
+    # first dir the cleanup tries.
+    delete_mock.assert_awaited()
+    call = delete_mock.await_args
+    assert call.args[0] == "10.0.0.5"
+    assert call.args[1] == "12345678"
+    assert call.args[2] == "/timelapse/myprint.mp4"
+
+
+@pytest.mark.asyncio
+async def test_forced_walks_alternate_dirs_when_first_fails(monkeypatch, tmp_path):
+    """If /timelapse/ DELE returns False (file not there), try the other
+    scanner dirs in order."""
+    archive = SimpleNamespace(
+        bambuddy_forced_timelapse=True,
+        timelapse_path="archive/1/myprint.mp4",
+    )
+    printer = SimpleNamespace(ip_address="10.0.0.5", access_code="12345678", model="O1C")
+    monkeypatch.setattr(
+        main_module,
+        "async_session",
+        _fake_session_factory({"PrintArchive": archive, "Printer": printer}),
+    )
+
+    video_path = tmp_path / archive.timelapse_path
+    video_path.parent.mkdir(parents=True, exist_ok=True)
+    video_path.write_bytes(b"x" * 100)
+
+    # First two attempts fail (False), third succeeds (True). Cleanup
+    # should stop after the third.
+    delete_mock = AsyncMock(side_effect=[False, False, True])
+    with patch("backend.app.services.bambu_ftp.delete_file_async", new=delete_mock):
+        await _cleanup_forced_timelapse(archive_id=99, printer_id=10)
+
+    assert delete_mock.await_count == 3
+    paths_tried = [call.args[2] for call in delete_mock.await_args_list]
+    assert paths_tried == [
+        "/timelapse/myprint.mp4",
+        "/timelapse/video/myprint.mp4",
+        "/record/myprint.mp4",
+    ]
+
+
+@pytest.mark.asyncio
+async def test_forced_local_cleanup_runs_even_if_ftp_unreachable(monkeypatch, tmp_path):
+    """FTP completely failing must not block local cleanup — the user's
+    archive UI should reflect that the timelapse is gone immediately,
+    even if the printer-side file lingers."""
+    archive = SimpleNamespace(
+        bambuddy_forced_timelapse=True,
+        timelapse_path="archive/1/myprint.mp4",
+    )
+    printer = SimpleNamespace(ip_address="10.0.0.5", access_code="12345678", model="O1C")
+    monkeypatch.setattr(
+        main_module,
+        "async_session",
+        _fake_session_factory({"PrintArchive": archive, "Printer": printer}),
+    )
+
+    video_path = tmp_path / archive.timelapse_path
+    video_path.parent.mkdir(parents=True, exist_ok=True)
+    video_path.write_bytes(b"x" * 100)
+
+    # Every FTP attempt throws.
+    delete_mock = AsyncMock(side_effect=OSError("connection refused"))
+    with patch("backend.app.services.bambu_ftp.delete_file_async", new=delete_mock):
+        await _cleanup_forced_timelapse(archive_id=99, printer_id=10)
+
+    # Local side cleaned up even though all FTP attempts threw.
+    assert not video_path.exists()
+    assert archive.timelapse_path is None
+    # All four dirs were attempted before giving up.
+    assert delete_mock.await_count == 4
diff --git a/backend/tests/unit/test_extract_video_last_frame.py b/backend/tests/unit/test_extract_video_last_frame.py
new file mode 100644
index 000000000..c58942e57
--- /dev/null
+++ b/backend/tests/unit/test_extract_video_last_frame.py
@@ -0,0 +1,171 @@
+"""Tests for extract_video_last_frame (#1397).
+
+Sources the finish photo from the per-print Bambu timelapse's last frame —
+captured by firmware after the toolhead parks but before the bed-drop
+end-gcode runs, so the print is framed correctly. A live camera grab at
+gcode_state=FINISH would capture the bed already lowered.
+
+We can't ship a real Bambu timelapse fixture in the repo (~7-11 MB each),
+so the happy-path test builds a tiny synthetic MP4 with ffmpeg at runtime.
+Failure paths (missing ffmpeg, missing source, subprocess failure, timeout)
+are exercised with monkeypatching so the suite stays hermetic and fast.
+"""
+
+import asyncio
+import shutil
+import subprocess
+from pathlib import Path
+from unittest.mock import patch
+
+import pytest
+
+from backend.app.services.camera import extract_video_last_frame
+
+_HAS_FFMPEG = shutil.which("ffmpeg") is not None
+
+
+def _make_synthetic_mp4(dest: Path, duration_seconds: float = 1.0) -> None:
+    """Create a tiny test MP4 via ffmpeg's testsrc generator.
+
+    Smallest valid MP4 we can construct without committing binary fixtures —
+    one second of 32x32 testsrc, ultrafast encode, ~3-5 KB.
+    """
+    cmd = [
+        "ffmpeg",
+        "-y",
+        "-hide_banner",
+        "-loglevel",
+        "error",
+        "-f",
+        "lavfi",
+        "-i",
+        f"testsrc=duration={duration_seconds}:size=32x32:rate=10",
+        "-preset",
+        "ultrafast",
+        "-pix_fmt",
+        "yuv420p",
+        str(dest),
+    ]
+    result = subprocess.run(cmd, capture_output=True, check=False)
+    if result.returncode != 0:
+        pytest.fail(f"ffmpeg fixture build failed (exit {result.returncode}): {result.stderr.decode()[:300]}")
+
+
+@pytest.mark.skipif(not _HAS_FFMPEG, reason="ffmpeg not on PATH")
+async def test_extracts_jpeg_from_real_mp4(tmp_path: Path):
+    src = tmp_path / "synthetic.mp4"
+    _make_synthetic_mp4(src)
+    out = tmp_path / "out.jpg"
+
+    ok = await extract_video_last_frame(src, out)
+
+    assert ok is True
+    assert out.exists()
+    assert out.stat().st_size > 0
+    # JPEG starts with the SOI marker (FFD8). Lightweight sanity check —
+    # we'd otherwise depend on Pillow just to decode.
+    assert out.read_bytes()[:2] == b"\xff\xd8"
+
+
+@pytest.mark.skipif(not _HAS_FFMPEG, reason="ffmpeg not on PATH")
+async def test_extracts_correctly_from_sub_second_video(tmp_path: Path):
+    """Regression for #1397 round 1: small prints (few layers) produce
+    sub-second Bambu timelapses (~0.6s / 16 frames). The earlier
+    ``-sseof -1.0`` approach seeked 1 second before end → before the
+    start of the file → ffmpeg silently returned frame 0. Verify the
+    write-every-frame-overwrite approach grabs a real frame regardless
+    of duration."""
+    src = tmp_path / "short.mp4"
+    _make_synthetic_mp4(src, duration_seconds=0.5)  # 5 frames at 10fps
+    out = tmp_path / "out.jpg"
+
+    ok = await extract_video_last_frame(src, out)
+
+    assert ok is True
+    assert out.exists()
+    assert out.stat().st_size > 0
+    assert out.read_bytes()[:2] == b"\xff\xd8"
+
+
+async def test_returns_false_when_source_missing(tmp_path: Path):
+    src = tmp_path / "does_not_exist.mp4"
+    out = tmp_path / "out.jpg"
+
+    ok = await extract_video_last_frame(src, out)
+
+    assert ok is False
+    assert not out.exists()
+
+
+async def test_returns_false_when_source_empty(tmp_path: Path):
+    src = tmp_path / "empty.mp4"
+    src.touch()
+    out = tmp_path / "out.jpg"
+
+    ok = await extract_video_last_frame(src, out)
+
+    assert ok is False
+    assert not out.exists()
+
+
+async def test_returns_false_when_ffmpeg_unavailable(tmp_path: Path):
+    src = tmp_path / "any.mp4"
+    src.write_bytes(b"\x00" * 100)
+    out = tmp_path / "out.jpg"
+
+    # Force the lookup path to return None — same shape as a host without
+    # ffmpeg installed. We don't want to be skipped on CI here; the
+    # not-installed path is a real production fallback and must be tested.
+    with patch("backend.app.services.camera.get_ffmpeg_path", return_value=None):
+        ok = await extract_video_last_frame(src, out)
+
+    assert ok is False
+    assert not out.exists()
+
+
+async def test_returns_false_when_ffmpeg_exits_nonzero(tmp_path: Path):
+    """ffmpeg failures (corrupt file, codec issue, etc.) return False, not
+    raise. The caller falls through to the existing live-camera path."""
+    src = tmp_path / "garbage.mp4"
+    src.write_bytes(b"not actually an mp4" * 100)
+    out = tmp_path / "out.jpg"
+
+    # Use a real ffmpeg invocation on garbage — guaranteed to fail with a
+    # non-zero exit code without us monkey-patching subprocess.
+    if not _HAS_FFMPEG:
+        pytest.skip("ffmpeg not on PATH; cannot exercise real failure path")
+
+    ok = await extract_video_last_frame(src, out)
+
+    assert ok is False
+    # ffmpeg may briefly touch the output file before failing; we don't
+    # require the file to be absent, only that the function reported failure
+    # so the caller falls back.
+
+
+async def test_returns_false_on_subprocess_timeout(tmp_path: Path, monkeypatch):
+    """A hung ffmpeg (network FS, bad codec, kernel bug) must not block the
+    finish-photo task forever. Patch ffmpeg to a sleep command that never
+    finishes — confirms the timeout path kills the subprocess."""
+    src = tmp_path / "stub.mp4"
+    src.write_bytes(b"\x00" * 100)
+    out = tmp_path / "out.jpg"
+
+    sleep_path = shutil.which("sleep")
+    if not sleep_path:
+        pytest.skip("sleep binary not available")
+
+    # Point get_ffmpeg_path at a real binary that never exits in 15s.
+    monkeypatch.setattr("backend.app.services.camera.get_ffmpeg_path", lambda: sleep_path)
+    # Tighten the timeout via monkeypatch on asyncio.wait_for to keep the
+    # test fast — patch only inside the call so we don't affect the harness.
+    real_wait_for = asyncio.wait_for
+
+    async def short_wait_for(awaitable, timeout):
+        return await real_wait_for(awaitable, timeout=0.5)
+
+    monkeypatch.setattr("backend.app.services.camera.asyncio.wait_for", short_wait_for)
+
+    ok = await extract_video_last_frame(src, out)
+
+    assert ok is False
diff --git a/backend/tests/unit/test_finish_photo_from_timelapse.py b/backend/tests/unit/test_finish_photo_from_timelapse.py
new file mode 100644
index 000000000..db8ba4340
--- /dev/null
+++ b/backend/tests/unit/test_finish_photo_from_timelapse.py
@@ -0,0 +1,174 @@
+"""Tests for _capture_finish_photo_from_timelapse (#1397).
+
+The polling helper runs in parallel with _scan_for_timelapse_with_retries —
+it waits for archive.timelapse_path to land in the DB, then extracts the
+last frame as the finish photo. These tests exercise the four shapes the
+helper has to handle correctly:
+
+  1. timelapse never lands within timeout → return None (caller falls back)
+  2. timelapse lands, extraction succeeds → return filename
+  3. timelapse lands, extraction fails → return None (caller falls back)
+  4. timelapse_path is set but the file doesn't exist on disk → keep polling
+
+DB access is patched at the session-maker boundary so these tests run in
+~50ms each without standing up a real engine.
+"""
+
+from contextlib import asynccontextmanager
+from pathlib import Path
+from types import SimpleNamespace
+from unittest.mock import AsyncMock, patch
+
+import pytest
+
+from backend.app import main as main_module
+from backend.app.main import _capture_finish_photo_from_timelapse
+
+
+@asynccontextmanager
+async def _fake_session(archive):
+    """A fake session whose execute().scalar_one_or_none() returns `archive`.
+
+    `archive` is mutated by the test mid-poll to simulate the real flow:
+    the timelapse-attach background task setting `timelapse_path` after a
+    few poll cycles.
+    """
+    result = SimpleNamespace(scalar_one_or_none=lambda: archive)
+    session = SimpleNamespace(execute=AsyncMock(return_value=result))
+    yield session
+
+
+@pytest.fixture
+def fake_archive():
+    """Mutable archive stand-in. Tests flip `.timelapse_path` to simulate
+    the timelapse-attach task writing to the DB."""
+    return SimpleNamespace(id=42, timelapse_path=None)
+
+
+@pytest.fixture(autouse=True)
+def _fast_poll(monkeypatch):
+    """Shrink poll interval + timeout so tests don't sleep for real."""
+    monkeypatch.setattr(main_module, "_FINISH_PHOTO_TIMELAPSE_POLL_INTERVAL_SECONDS", 0.01)
+    monkeypatch.setattr(main_module, "_FINISH_PHOTO_TIMELAPSE_POLL_TIMEOUT_SECONDS", 0.2)
+
+
+@pytest.fixture
+def patched_session(fake_archive, monkeypatch):
+    """Patch main.async_session so the helper reads our fake archive."""
+    monkeypatch.setattr(main_module, "async_session", lambda: _fake_session(fake_archive))
+    return fake_archive
+
+
+async def test_returns_none_when_timelapse_never_lands(tmp_path: Path, patched_session):
+    """Print finished without a timelapse — bail after timeout so the caller
+    falls back to the live-camera grab."""
+    result = await _capture_finish_photo_from_timelapse(
+        archive_id=42,
+        archive_dir=tmp_path,
+    )
+    assert result is None
+
+
+async def test_extracts_frame_when_timelapse_lands(tmp_path: Path, patched_session, monkeypatch):
+    """Simulate the timelapse landing after one poll cycle and extraction
+    succeeding — should return a filename matching the finish_*.jpg pattern."""
+    # Lay down a stub timelapse file relative to base_dir so the path
+    # join works the way the helper expects.
+    monkeypatch.setattr(main_module.app_settings, "base_dir", tmp_path)
+    video_relpath = Path("archive/1/print/timelapse.mp4")
+    video_abspath = tmp_path / video_relpath
+    video_abspath.parent.mkdir(parents=True, exist_ok=True)
+    video_abspath.write_bytes(b"x" * 100)  # non-empty so the size check passes
+
+    # Patch extraction to succeed unconditionally — the actual ffmpeg
+    # codepath has its own test file.
+    async def fake_extract(src, dst):
+        dst.write_bytes(b"\xff\xd8" + b"\x00" * 50)  # JPEG SOI
+        return True
+
+    monkeypatch.setattr(main_module, "_FINISH_PHOTO_TIMELAPSE_POLL_INTERVAL_SECONDS", 0.0)
+
+    # Flip the archive into the "timelapse landed" state before the first
+    # poll — the helper picks it up on its initial read.
+    patched_session.timelapse_path = str(video_relpath)
+
+    with patch(
+        "backend.app.services.camera.extract_video_last_frame",
+        new=fake_extract,
+    ):
+        result = await _capture_finish_photo_from_timelapse(
+            archive_id=42,
+            archive_dir=tmp_path / "archive_dir",
+        )
+
+    assert result is not None
+    assert result.startswith("finish_")
+    assert result.endswith(".jpg")
+    assert (tmp_path / "archive_dir" / "photos" / result).exists()
+
+
+async def test_returns_none_when_extraction_fails(tmp_path: Path, patched_session, monkeypatch):
+    """Timelapse landed but ffmpeg said no — we don't keep retrying on the
+    same broken file; return None so the caller falls back."""
+    monkeypatch.setattr(main_module.app_settings, "base_dir", tmp_path)
+    video_relpath = Path("archive/1/print/timelapse.mp4")
+    video_abspath = tmp_path / video_relpath
+    video_abspath.parent.mkdir(parents=True, exist_ok=True)
+    video_abspath.write_bytes(b"x" * 100)
+
+    async def fake_extract_fails(src, dst):
+        return False
+
+    patched_session.timelapse_path = str(video_relpath)
+
+    with patch(
+        "backend.app.services.camera.extract_video_last_frame",
+        new=fake_extract_fails,
+    ):
+        result = await _capture_finish_photo_from_timelapse(
+            archive_id=42,
+            archive_dir=tmp_path / "archive_dir",
+        )
+
+    assert result is None
+
+
+async def test_polls_until_file_appears(tmp_path: Path, patched_session, monkeypatch):
+    """timelapse_path is set, but the file isn't on disk yet (the attach
+    background task hasn't finished writing). Should keep polling — and
+    succeed once the file materialises."""
+    monkeypatch.setattr(main_module.app_settings, "base_dir", tmp_path)
+    monkeypatch.setattr(main_module, "_FINISH_PHOTO_TIMELAPSE_POLL_INTERVAL_SECONDS", 0.05)
+    monkeypatch.setattr(main_module, "_FINISH_PHOTO_TIMELAPSE_POLL_TIMEOUT_SECONDS", 1.0)
+
+    video_relpath = Path("archive/1/print/timelapse.mp4")
+    patched_session.timelapse_path = str(video_relpath)
+
+    # File not present yet. Schedule it to land after ~150ms.
+    import asyncio
+
+    async def materialise_later():
+        await asyncio.sleep(0.15)
+        video_abspath = tmp_path / video_relpath
+        video_abspath.parent.mkdir(parents=True, exist_ok=True)
+        video_abspath.write_bytes(b"x" * 100)
+
+    async def fake_extract(src, dst):
+        dst.write_bytes(b"\xff\xd8")
+        return True
+
+    materialise = asyncio.create_task(materialise_later())
+    try:
+        with patch(
+            "backend.app.services.camera.extract_video_last_frame",
+            new=fake_extract,
+        ):
+            result = await _capture_finish_photo_from_timelapse(
+                archive_id=42,
+                archive_dir=tmp_path / "archive_dir",
+            )
+    finally:
+        materialise.cancel()
+
+    assert result is not None
+    assert result.startswith("finish_")
diff --git a/backend/tests/unit/test_scheduler_force_timelapse_wiring.py b/backend/tests/unit/test_scheduler_force_timelapse_wiring.py
new file mode 100644
index 000000000..9ee599ebc
--- /dev/null
+++ b/backend/tests/unit/test_scheduler_force_timelapse_wiring.py
@@ -0,0 +1,71 @@
+"""Regression test for the print-queue path of the #1397 force-timelapse fix.
+
+The first round of #1397 only wired the override into ``background_dispatch.py``,
+which covers Print Now / Reprint Now flows. The print *queue* uses a separate
+scheduler at ``print_scheduler.py:_start_print`` that calls
+``printer_manager.start_print`` directly — and the first attempt skipped that
+call site, so queued prints' timelapse setting passed through unchanged and
+the finish-photo path had nothing to draw from. Field-test caught this when
+Martin queued two prints (H2D + X1C); neither got a forced timelapse and
+``archive.bambuddy_forced_timelapse`` stayed False on both.
+
+This test pins the wiring at the source level: the helper is imported AND
+its return value is what ``start_print(timelapse=...)`` receives. We can't
+exercise the full ``_start_print`` method without standing up a real DB +
+printer_manager + ams_assignment fixture stack, but the structural assert
+is enough to catch regression at the dispatch hook.
+"""
+
+import ast
+from pathlib import Path
+
+SCHEDULER_PATH = Path(__file__).resolve().parent.parent.parent / "app" / "services" / "print_scheduler.py"
+
+
+def _find_call_to_start_print(tree: ast.AST) -> ast.Call:
+    """Walk the AST and return the printer_manager.start_print(...) Call node
+    inside _start_print. Should be exactly one."""
+    for node in ast.walk(tree):
+        if not isinstance(node, ast.Call):
+            continue
+        func = node.func
+        if not isinstance(func, ast.Attribute):
+            continue
+        if func.attr != "start_print":
+            continue
+        value = func.value
+        if not isinstance(value, ast.Name) or value.id != "printer_manager":
+            continue
+        return node
+    raise AssertionError("Could not find printer_manager.start_print(...) call in print_scheduler.py")
+
+
+def test_start_print_timelapse_kwarg_uses_resolved_value():
+    """``timelapse=`` kwarg passed to start_print must reference
+    ``effective_timelapse`` (the resolved value) — not ``item.timelapse``
+    (the user's raw choice). If a refactor drops the resolver call and
+    restores ``item.timelapse``, this test fails."""
+    source = SCHEDULER_PATH.read_text()
+    tree = ast.parse(source)
+
+    call = _find_call_to_start_print(tree)
+    timelapse_kw = next((kw for kw in call.keywords if kw.arg == "timelapse"), None)
+    assert timelapse_kw is not None, "start_print(timelapse=...) kwarg is missing"
+
+    # The value must be the resolved variable, not item.timelapse.
+    value = timelapse_kw.value
+    assert isinstance(value, ast.Name) and value.id == "effective_timelapse", (
+        f"timelapse= must be the resolver's return value (effective_timelapse), "
+        f"got {ast.dump(value)}. The queue path must apply the same #1397 "
+        f"override as background_dispatch.py — otherwise queued prints' "
+        f"finish-photo extractor has nothing to pull from."
+    )
+
+
+def test_scheduler_imports_resolve_effective_timelapse():
+    """The import must exist somewhere in print_scheduler.py — guards against
+    a future refactor removing it and falling back to item.timelapse."""
+    source = SCHEDULER_PATH.read_text()
+    assert "from backend.app.services.background_dispatch import resolve_effective_timelapse" in source, (
+        "print_scheduler.py must import resolve_effective_timelapse from background_dispatch"
+    )
diff --git a/frontend/src/i18n/locales/de.ts b/frontend/src/i18n/locales/de.ts
index 53b4eb8e4..aac1174c2 100644
--- a/frontend/src/i18n/locales/de.ts
+++ b/frontend/src/i18n/locales/de.ts
@@ -2156,7 +2156,7 @@ export default {
     autoArchivePrints: 'Drucke automatisch archivieren',
     autoArchiveDescription: '3MF-Dateien automatisch speichern, wenn Drucke abgeschlossen sind',
     saveThumbnailsDescription: 'Vorschaubilder aus 3MF-Dateien extrahieren und speichern',
-    captureFinishPhotoDescription: 'Foto von der Druckerkamera aufnehmen, wenn der Druck abgeschlossen ist',
+    captureFinishPhotoDescription: 'Foto von der Druckerkamera aufnehmen, wenn der Druck abgeschlossen ist. Bambuddy zeichnet während des Drucks einen kurzen Zeitraffer auf, damit das Foto aus dem Moment vor dem Absenken der Druckplatte stammen kann. Die Zeitraffer-Datei bleibt erhalten, wenn du den Zeitraffer für diesen Druck aktiviert hast, andernfalls wird sie nach Aufnahme des Fotos automatisch gelöscht.',
     ffmpegNotInstalled: 'ffmpeg nicht installiert',
     ffmpegRequired: 'Kameraaufnahme benötigt ffmpeg. Installieren über <brew>brew install ffmpeg</brew> (macOS) oder <apt>apt install ffmpeg</apt> (Linux).',
     // Camera
diff --git a/frontend/src/i18n/locales/en.ts b/frontend/src/i18n/locales/en.ts
index cea626940..849a88dd7 100644
--- a/frontend/src/i18n/locales/en.ts
+++ b/frontend/src/i18n/locales/en.ts
@@ -2159,7 +2159,7 @@ export default {
     autoArchivePrints: 'Auto-archive prints',
     autoArchiveDescription: 'Automatically save 3MF files when prints complete',
     saveThumbnailsDescription: 'Extract and save preview images from 3MF files',
-    captureFinishPhotoDescription: 'Take a photo from printer camera when print completes',
+    captureFinishPhotoDescription: 'Take a photo from printer camera when print completes. Bambuddy records a brief timelapse during the print so the photo can be sourced from the moment before the bed drops; the timelapse file is kept if you enabled timelapse for this print, otherwise it is deleted automatically after the photo is captured.',
     ffmpegNotInstalled: 'ffmpeg not installed',
     ffmpegRequired: 'Camera capture requires ffmpeg. Install it via <brew>brew install ffmpeg</brew> (macOS) or <apt>apt install ffmpeg</apt> (Linux).',
     // Camera
diff --git a/frontend/src/i18n/locales/es.ts b/frontend/src/i18n/locales/es.ts
index 81415abe0..5df14a67a 100644
--- a/frontend/src/i18n/locales/es.ts
+++ b/frontend/src/i18n/locales/es.ts
@@ -2159,7 +2159,7 @@ export default {
     autoArchivePrints: 'Archivar impresiones automáticamente',
     autoArchiveDescription: 'Guardar automáticamente los archivos 3MF cuando se completan las impresiones',
     saveThumbnailsDescription: 'Extraer y guardar imágenes de vista previa de los archivos 3MF',
-    captureFinishPhotoDescription: 'Tomar una foto desde la cámara de la impresora cuando se completa la impresión',
+    captureFinishPhotoDescription: 'Tomar una foto desde la cámara de la impresora cuando se completa la impresión. Bambuddy graba un breve timelapse durante la impresión para que la foto pueda obtenerse del momento previo al descenso de la cama; el archivo del timelapse se conserva si activaste el timelapse para esta impresión, de lo contrario se elimina automáticamente tras capturar la foto.',
     ffmpegNotInstalled: 'ffmpeg no instalado',
     ffmpegRequired: 'La captura de cámara requiere ffmpeg. Instálelo mediante <brew>brew install ffmpeg</brew> (macOS) o <apt>apt install ffmpeg</apt> (Linux).',
     // Camera
diff --git a/frontend/src/i18n/locales/fr.ts b/frontend/src/i18n/locales/fr.ts
index 8b58a7ec1..c6e2aa756 100644
--- a/frontend/src/i18n/locales/fr.ts
+++ b/frontend/src/i18n/locales/fr.ts
@@ -2110,7 +2110,7 @@ export default {
     autoArchivePrints: 'Archiver automatiquement les impressions',
     autoArchiveDescription: 'Sauvegarder automatiquement les fichiers 3MF à la fin des impressions',
     saveThumbnailsDescription: 'Extraire et sauvegarder les images d\'aperçu des fichiers 3MF',
-    captureFinishPhotoDescription: 'Prendre une photo avec la caméra de l\'imprimante à la fin de l\'impression',
+    captureFinishPhotoDescription: 'Prendre une photo avec la caméra de l\'imprimante à la fin de l\'impression. Bambuddy enregistre un court timelapse pendant l\'impression afin que la photo puisse provenir du moment précédant l\'abaissement du plateau ; le fichier du timelapse est conservé si vous avez activé le timelapse pour cette impression, sinon il est supprimé automatiquement après la capture de la photo.',
     ffmpegNotInstalled: 'ffmpeg non installé',
     ffmpegRequired: 'La capture caméra nécessite ffmpeg. Installez-le via <brew>brew install ffmpeg</brew> (macOS) ou <apt>apt install ffmpeg</apt> (Linux).',
     camera: 'Caméra',
diff --git a/frontend/src/i18n/locales/it.ts b/frontend/src/i18n/locales/it.ts
index 5eadb5e2e..12febabe2 100644
--- a/frontend/src/i18n/locales/it.ts
+++ b/frontend/src/i18n/locales/it.ts
@@ -2109,7 +2109,7 @@ export default {
     autoArchivePrints: 'Archiviazione automatica stampe',
     autoArchiveDescription: 'Salva automaticamente i file 3MF al completamento delle stampe',
     saveThumbnailsDescription: 'Estrai e salva le immagini di anteprima dai file 3MF',
-    captureFinishPhotoDescription: 'Scatta una foto dalla fotocamera della stampante al completamento della stampa',
+    captureFinishPhotoDescription: 'Scatta una foto dalla fotocamera della stampante al completamento della stampa. Bambuddy registra un breve timelapse durante la stampa in modo che la foto possa essere ricavata dal momento precedente all\'abbassamento del piatto; il file del timelapse viene mantenuto se hai abilitato il timelapse per questa stampa, altrimenti viene eliminato automaticamente dopo l\'acquisizione della foto.',
     ffmpegNotInstalled: 'ffmpeg non installato',
     ffmpegRequired: 'L\'acquisizione dalla fotocamera richiede ffmpeg. Installalo tramite <brew>brew install ffmpeg</brew> (macOS) o <apt>apt install ffmpeg</apt> (Linux).',
     camera: 'Fotocamera',
diff --git a/frontend/src/i18n/locales/ja.ts b/frontend/src/i18n/locales/ja.ts
index 72d253380..e4a3bd409 100644
--- a/frontend/src/i18n/locales/ja.ts
+++ b/frontend/src/i18n/locales/ja.ts
@@ -2155,7 +2155,7 @@ export default {
     autoArchivePrints: '印刷を自動アーカイブ',
     autoArchiveDescription: '印刷完了時に3MFファイルを自動保存',
     saveThumbnailsDescription: '3MFファイルからプレビュー画像を抽出して保存',
-    captureFinishPhotoDescription: '印刷完了時にプリンターカメラから写真を撮影',
+    captureFinishPhotoDescription: '印刷完了時にプリンターカメラから写真を撮影します。Bambuddy は印刷中に短いタイムラプスを記録し、ベッドが下がる前の瞬間から写真を取得できるようにします。この印刷でタイムラプスを有効にしていた場合はタイムラプスファイルが保存され、それ以外の場合は写真の取得後に自動的に削除されます。',
     ffmpegNotInstalled: 'ffmpegがインストールされていません',
     ffmpegRequired: 'カメラ撮影にはffmpegが必要です。<brew>brew install ffmpeg</brew>（macOS）または<apt>apt install ffmpeg</apt>（Linux）でインストールしてください。',
     // Camera
diff --git a/frontend/src/i18n/locales/ko.ts b/frontend/src/i18n/locales/ko.ts
index d26c7067e..530a44735 100644
--- a/frontend/src/i18n/locales/ko.ts
+++ b/frontend/src/i18n/locales/ko.ts
@@ -2026,7 +2026,7 @@ export default {
     autoArchivePrints: '인쇄 자동 아카이브',
     autoArchiveDescription: '인쇄 완료 시 3MF 파일 자동 저장',
     saveThumbnailsDescription: '3MF 파일에서 미리보기 이미지 추출 및 저장',
-    captureFinishPhotoDescription: '인쇄 완료 시 프린터 카메라로 사진 촬영',
+    captureFinishPhotoDescription: '인쇄 완료 시 프린터 카메라로 사진 촬영. Bambuddy는 인쇄 중 짧은 타임랩스를 기록하여 베드가 내려가기 전 순간에서 사진을 가져올 수 있도록 합니다. 이 인쇄에 대해 타임랩스를 활성화한 경우 타임랩스 파일이 보관되며, 그렇지 않으면 사진 촬영 후 자동으로 삭제됩니다.',
     ffmpegNotInstalled: 'ffmpeg 미설치',
     ffmpegRequired: '카메라 캡처에 ffmpeg가 필요합니다. macOS에서는 <brew>brew install ffmpeg</brew>, Linux에서는 <apt>apt install ffmpeg</apt>로 설치하세요.',
     camera: '카메라',
diff --git a/frontend/src/i18n/locales/pt-BR.ts b/frontend/src/i18n/locales/pt-BR.ts
index fc55f0c9d..a27c58c70 100644
--- a/frontend/src/i18n/locales/pt-BR.ts
+++ b/frontend/src/i18n/locales/pt-BR.ts
@@ -2109,7 +2109,7 @@ export default {
     autoArchivePrints: 'Arquivar impressões automaticamente',
     autoArchiveDescription: 'Salvar automaticamente arquivos 3MF quando impressões forem concluídas',
     saveThumbnailsDescription: 'Extrair e salvar imagens de pré-visualização dos arquivos 3MF',
-    captureFinishPhotoDescription: 'Tirar foto da câmera da impressora quando a impressão for concluída',
+    captureFinishPhotoDescription: 'Tirar foto da câmera da impressora quando a impressão for concluída. Bambuddy grava um timelapse curto durante a impressão para que a foto possa ser obtida do momento antes da mesa descer; o arquivo do timelapse é mantido se você habilitou o timelapse para esta impressão, caso contrário ele é excluído automaticamente após a captura da foto.',
     ffmpegNotInstalled: 'ffmpeg não instalado',
     ffmpegRequired: 'A captura de câmera requer ffmpeg. Instale via <brew>brew install ffmpeg</brew> (macOS) ou <apt>apt install ffmpeg</apt> (Linux).',
     camera: 'Câmera',
diff --git a/frontend/src/i18n/locales/tr.ts b/frontend/src/i18n/locales/tr.ts
index b81ad251d..6dbf49d19 100644
--- a/frontend/src/i18n/locales/tr.ts
+++ b/frontend/src/i18n/locales/tr.ts
@@ -2159,7 +2159,7 @@ export default {
     autoArchivePrints: 'Baskıları otomatik arşivle',
     autoArchiveDescription: 'Baskılar tamamlandığında 3MF dosyalarını otomatik olarak kaydet',
     saveThumbnailsDescription: '3MF dosyalarından önizleme görüntülerini çıkar ve kaydet',
-    captureFinishPhotoDescription: 'Baskı tamamlandığında yazıcı kamerasından bir fotoğraf çek',
+    captureFinishPhotoDescription: 'Baskı tamamlandığında yazıcı kamerasından bir fotoğraf çek. Bambuddy, baskı sırasında kısa bir zaman atlamalı kayıt yapar, böylece fotoğraf tabla inmeden önceki andan alınabilir. Bu baskı için zaman atlamalı kaydı etkinleştirdiyseniz dosya saklanır, aksi takdirde fotoğraf çekildikten sonra otomatik olarak silinir.',
     ffmpegNotInstalled: 'ffmpeg yüklü değil',
     ffmpegRequired: 'Kamera yakalama ffmpeg gerektirir. <brew>brew install ffmpeg</brew> (macOS) veya <apt>apt install ffmpeg</apt> (Linux) ile yükleyin.',
     // Kamera
diff --git a/frontend/src/i18n/locales/zh-CN.ts b/frontend/src/i18n/locales/zh-CN.ts
index 11c05e321..42753e1f7 100644
--- a/frontend/src/i18n/locales/zh-CN.ts
+++ b/frontend/src/i18n/locales/zh-CN.ts
@@ -2154,7 +2154,7 @@ export default {
     autoArchivePrints: '自动归档打印',
     autoArchiveDescription: '打印完成时自动保存3MF文件',
     saveThumbnailsDescription: '从3MF文件中提取并保存预览图像',
-    captureFinishPhotoDescription: '打印完成时从打印机摄像头拍照',
+    captureFinishPhotoDescription: '打印完成时从打印机摄像头拍照。Bambuddy 会在打印期间录制一段短延时摄影，以便从热床下降前的瞬间获取照片；如果您为本次打印启用了延时摄影，文件将保留，否则会在拍照完成后自动删除。',
     ffmpegNotInstalled: '未安装ffmpeg',
     ffmpegRequired: '摄像头捕获需要ffmpeg。通过 <brew>brew install ffmpeg</brew>（macOS）或 <apt>apt install ffmpeg</apt>（Linux）安装。',
     camera: '摄像头',
diff --git a/frontend/src/i18n/locales/zh-TW.ts b/frontend/src/i18n/locales/zh-TW.ts
index a76297c58..eca523aeb 100644
--- a/frontend/src/i18n/locales/zh-TW.ts
+++ b/frontend/src/i18n/locales/zh-TW.ts
@@ -2154,7 +2154,7 @@ export default {
     autoArchivePrints: '自動歸檔列印',
     autoArchiveDescription: '列印完成時自動儲存3MF檔案',
     saveThumbnailsDescription: '從3MF檔案中提取並儲存預覽影像',
-    captureFinishPhotoDescription: '列印完成時從印表機攝影機拍照',
+    captureFinishPhotoDescription: '列印完成時從印表機攝影機拍照。Bambuddy 會在列印期間錄製一段短縮時攝影，以便從熱床下降前的瞬間取得照片；如果您為本次列印啟用了縮時攝影，檔案將保留，否則會在拍照完成後自動刪除。',
     ffmpegNotInstalled: '未安裝ffmpeg',
     ffmpegRequired: '攝影機捕獲需要ffmpeg。透過 <brew>brew install ffmpeg</brew>（macOS）或 <apt>apt install ffmpeg</apt>（Linux）安裝。',
     camera: '攝影機',
diff --git a/static/assets/index-Dai0-twV.js b/static/assets/index-14DWwfbR.js
similarity index 87%
rename from static/assets/index-Dai0-twV.js
rename to static/assets/index-14DWwfbR.js
index 3147de3ed..6c3fd4adb 100644
--- a/static/assets/index-Dai0-twV.js
+++ b/static/assets/index-14DWwfbR.js
@@ -6,37 +6,37 @@ function lme(t,e){for(var a=0;a<e.length;a++){const n=e[a];if(typeof n!="string"
 `+pt[M].replace(" at new "," at ");return h.displayName&&qt.includes("<anonymous>")&&(qt=qt.replace("<anonymous>",h.displayName)),qt}while(1<=M&&0<=W);break}}}finally{q=!1,Error.prepareStackTrace=_}return(_=h?h.displayName||h.name:"")?B(_):""}function X(h,w){switch(h.tag){case 26:case 27:case 5:return B(h.type);case 16:return B("Lazy");case 13:return h.child!==w&&w!==null?B("Suspense Fallback"):B("Suspense");case 19:return B("SuspenseList");case 0:case 15:return K(h.type,!1);case 11:return K(h.type.render,!1);case 1:return K(h.type,!0);case 31:return B("Activity");default:return""}}function ie(h){try{var w="",_=null;do w+=X(h,_),_=h,h=h.return;while(h);return w}catch(M){return`
 Error generating stack: `+M.message+`
 `+M.stack}}var se=Object.prototype.hasOwnProperty,he=t.unstable_scheduleCallback,ce=t.unstable_cancelCallback,fe=t.unstable_shouldYield,$=t.unstable_requestPaint,z=t.unstable_now,ae=t.unstable_getCurrentPriorityLevel,ge=t.unstable_ImmediatePriority,be=t.unstable_UserBlockingPriority,ve=t.unstable_NormalPriority,Me=t.unstable_LowPriority,Ee=t.unstable_IdlePriority,Pe=t.log,Ue=t.unstable_setDisableYieldValue,Ce=null,Ie=null;function Re(h){if(typeof Pe=="function"&&Ue(h),Ie&&typeof Ie.setStrictMode=="function")try{Ie.setStrictMode(Ce,h)}catch{}}var qe=Math.clz32?Math.clz32:ze,Le=Math.log,st=Math.LN2;function ze(h){return h>>>=0,h===0?32:31-(Le(h)/st|0)|0}var at=256,je=262144,Qe=4194304;function $e(h){var w=h&42;if(w!==0)return w;switch(h&-h){case 1:return 1;case 2:return 2;case 4:return 4;case 8:return 8;case 16:return 16;case 32:return 32;case 64:return 64;case 128:return 128;case 256:case 512:case 1024:case 2048:case 4096:case 8192:case 16384:case 32768:case 65536:case 131072:return h&261888;case 262144:case 524288:case 1048576:case 2097152:return h&3932160;case 4194304:case 8388608:case 16777216:case 33554432:return h&62914560;case 67108864:return 67108864;case 134217728:return 134217728;case 268435456:return 268435456;case 536870912:return 536870912;case 1073741824:return 0;default:return h}}function Ne(h,w,_){var M=h.pendingLanes;if(M===0)return 0;var W=0,ee=h.suspendedLanes,Se=h.pingedLanes;h=h.warmLanes;var He=M&134217727;return He!==0?(M=He&~ee,M!==0?W=$e(M):(Se&=He,Se!==0?W=$e(Se):_||(_=He&~h,_!==0&&(W=$e(_))))):(He=M&~ee,He!==0?W=$e(He):Se!==0?W=$e(Se):_||(_=M&~h,_!==0&&(W=$e(_)))),W===0?0:w!==0&&w!==W&&(w&ee)===0&&(ee=W&-W,_=w&-w,ee>=_||ee===32&&(_&4194048)!==0)?w:W}function Oe(h,w){return(h.pendingLanes&~(h.suspendedLanes&~h.pingedLanes)&w)===0}function Ze(h,w){switch(h){case 1:case 2:case 4:case 8:case 64:return w+250;case 16:case 32:case 128:case 256:case 512:case 1024:case 2048:case 4096:case 8192:case 16384:case 32768:case 65536:case 131072:case 262144:case 524288:case 1048576:case 2097152:return w+5e3;case 4194304:case 8388608:case 16777216:case 33554432:return-1;case 67108864:case 134217728:case 268435456:case 536870912:case 1073741824:return-1;default:return-1}}function We(){var h=Qe;return Qe<<=1,(Qe&62914560)===0&&(Qe=4194304),h}function Ae(h){for(var w=[],_=0;31>_;_++)w.push(h);return w}function rt(h,w){h.pendingLanes|=w,w!==268435456&&(h.suspendedLanes=0,h.pingedLanes=0,h.warmLanes=0)}function et(h,w,_,M,W,ee){var Se=h.pendingLanes;h.pendingLanes=_,h.suspendedLanes=0,h.pingedLanes=0,h.warmLanes=0,h.expiredLanes&=_,h.entangledLanes&=_,h.errorRecoveryDisabledLanes&=_,h.shellSuspendCounter=0;var He=h.entanglements,pt=h.expirationTimes,Et=h.hiddenUpdates;for(_=Se&~_;0<_;){var qt=31-qe(_),Wt=1<<qt;He[qt]=0,pt[qt]=-1;var Lt=Et[qt];if(Lt!==null)for(Et[qt]=null,qt=0;qt<Lt.length;qt++){var Bt=Lt[qt];Bt!==null&&(Bt.lane&=-536870913)}_&=~Wt}M!==0&&Ct(h,M,0),ee!==0&&W===0&&h.tag!==0&&(h.suspendedLanes|=ee&~(Se&~w))}function Ct(h,w,_){h.pendingLanes|=w,h.suspendedLanes&=~w;var M=31-qe(w);h.entangledLanes|=w,h.entanglements[M]=h.entanglements[M]|1073741824|_&261930}function Ut(h,w){var _=h.entangledLanes|=w;for(h=h.entanglements;_;){var M=31-qe(_),W=1<<M;W&w|h[M]&w&&(h[M]|=w),_&=~W}}function gt(h,w){var _=w&-w;return _=(_&42)!==0?1:Vt(_),(_&(h.suspendedLanes|w))!==0?0:_}function Vt(h){switch(h){case 2:h=1;break;case 8:h=4;break;case 32:h=16;break;case 256:case 512:case 1024:case 2048:case 4096:case 8192:case 16384:case 32768:case 65536:case 131072:case 262144:case 524288:case 1048576:case 2097152:case 4194304:case 8388608:case 16777216:case 33554432:h=128;break;case 268435456:h=134217728;break;default:h=0}return h}function Zt(h){return h&=-h,2<h?8<h?(h&134217727)!==0?32:268435456:8:2}function oa(){var h=J.p;return h!==0?h:(h=window.event,h===void 0?32:kq(h.type))}function fa(h,w){var _=J.p;try{return J.p=h,w()}finally{J.p=_}}var ft=Math.random().toString(36).slice(2),vt="__reactFiber$"+ft,Pt="__reactProps$"+ft,Tt="__reactContainer$"+ft,It="__reactEvents$"+ft,Fe="__reactListeners$"+ft,ot="__reactHandles$"+ft,dt="__reactResources$"+ft,Te="__reactMarker$"+ft;function _e(h){delete h[vt],delete h[Pt],delete h[It],delete h[Fe],delete h[ot]}function lt(h){var w=h[vt];if(w)return w;for(var _=h.parentNode;_;){if(w=_[Tt]||_[vt]){if(_=w.alternate,w.child!==null||_!==null&&_.child!==null)for(h=oq(h);h!==null;){if(_=h[vt])return _;h=oq(h)}return w}h=_,_=h.parentNode}return null}function we(h){if(h=h[vt]||h[Tt]){var w=h.tag;if(w===5||w===6||w===13||w===31||w===26||w===27||w===3)return h}return null}function Ge(h){var w=h.tag;if(w===5||w===26||w===27||w===6)return h.stateNode;throw Error(n(33))}function tt(h){var w=h[dt];return w||(w=h[dt]={hoistableStyles:new Map,hoistableScripts:new Map}),w}function nt(h){h[Te]=!0}var Je=new Set,St={};function _t(h,w){Be(h,w),Be(h+"Capture",w)}function Be(h,w){for(St[h]=w,h=0;h<w.length;h++)Je.add(w[h])}var Xe=RegExp("^[:A-Z_a-z\\u00C0-\\u00D6\\u00D8-\\u00F6\\u00F8-\\u02FF\\u0370-\\u037D\\u037F-\\u1FFF\\u200C-\\u200D\\u2070-\\u218F\\u2C00-\\u2FEF\\u3001-\\uD7FF\\uF900-\\uFDCF\\uFDF0-\\uFFFD][:A-Z_a-z\\u00C0-\\u00D6\\u00D8-\\u00F6\\u00F8-\\u02FF\\u0370-\\u037D\\u037F-\\u1FFF\\u200C-\\u200D\\u2070-\\u218F\\u2C00-\\u2FEF\\u3001-\\uD7FF\\uF900-\\uFDCF\\uFDF0-\\uFFFD\\-.0-9\\u00B7\\u0300-\\u036F\\u203F-\\u2040]*$"),Ft={},bt={};function Dt(h){return se.call(bt,h)?!0:se.call(Ft,h)?!1:Xe.test(h)?bt[h]=!0:(Ft[h]=!0,!1)}function Ye(h,w,_){if(Dt(w))if(_===null)h.removeAttribute(w);else{switch(typeof _){case"undefined":case"function":case"symbol":h.removeAttribute(w);return;case"boolean":var M=w.toLowerCase().slice(0,5);if(M!=="data-"&&M!=="aria-"){h.removeAttribute(w);return}}h.setAttribute(w,""+_)}}function Ve(h,w,_){if(_===null)h.removeAttribute(w);else{switch(typeof _){case"undefined":case"function":case"symbol":case"boolean":h.removeAttribute(w);return}h.setAttribute(w,""+_)}}function Yt(h,w,_,M){if(M===null)h.removeAttribute(_);else{switch(typeof M){case"undefined":case"function":case"symbol":case"boolean":h.removeAttribute(_);return}h.setAttributeNS(w,_,""+M)}}function da(h){switch(typeof h){case"bigint":case"boolean":case"number":case"string":case"undefined":return h;case"object":return h;default:return""}}function ra(h){var w=h.type;return(h=h.nodeName)&&h.toLowerCase()==="input"&&(w==="checkbox"||w==="radio")}function ea(h,w,_){var M=Object.getOwnPropertyDescriptor(h.constructor.prototype,w);if(!h.hasOwnProperty(w)&&typeof M<"u"&&typeof M.get=="function"&&typeof M.set=="function"){var W=M.get,ee=M.set;return Object.defineProperty(h,w,{configurable:!0,get:function(){return W.call(this)},set:function(Se){_=""+Se,ee.call(this,Se)}}),Object.defineProperty(h,w,{enumerable:M.enumerable}),{getValue:function(){return _},setValue:function(Se){_=""+Se},stopTracking:function(){h._valueTracker=null,delete h[w]}}}}function ma(h){if(!h._valueTracker){var w=ra(h)?"checked":"value";h._valueTracker=ea(h,w,""+h[w])}}function Na(h){if(!h)return!1;var w=h._valueTracker;if(!w)return!0;var _=w.getValue(),M="";return h&&(M=ra(h)?h.checked?"true":"false":h.value),h=M,h!==_?(w.setValue(h),!0):!1}function Za(h){if(h=h||(typeof document<"u"?document:void 0),typeof h>"u")return null;try{return h.activeElement||h.body}catch{return h.body}}var Ir=/[\n"\\]/g;function Oa(h){return h.replace(Ir,function(w){return"\\"+w.charCodeAt(0).toString(16)+" "})}function Un(h,w,_,M,W,ee,Se,He){h.name="",Se!=null&&typeof Se!="function"&&typeof Se!="symbol"&&typeof Se!="boolean"?h.type=Se:h.removeAttribute("type"),w!=null?Se==="number"?(w===0&&h.value===""||h.value!=w)&&(h.value=""+da(w)):h.value!==""+da(w)&&(h.value=""+da(w)):Se!=="submit"&&Se!=="reset"||h.removeAttribute("value"),w!=null?un(h,Se,da(w)):_!=null?un(h,Se,da(_)):M!=null&&h.removeAttribute("value"),W==null&&ee!=null&&(h.defaultChecked=!!ee),W!=null&&(h.checked=W&&typeof W!="function"&&typeof W!="symbol"),He!=null&&typeof He!="function"&&typeof He!="symbol"&&typeof He!="boolean"?h.name=""+da(He):h.removeAttribute("name")}function Ua(h,w,_,M,W,ee,Se,He){if(ee!=null&&typeof ee!="function"&&typeof ee!="symbol"&&typeof ee!="boolean"&&(h.type=ee),w!=null||_!=null){if(!(ee!=="submit"&&ee!=="reset"||w!=null)){ma(h);return}_=_!=null?""+da(_):"",w=w!=null?""+da(w):_,He||w===h.value||(h.value=w),h.defaultValue=w}M=M??W,M=typeof M!="function"&&typeof M!="symbol"&&!!M,h.checked=He?h.checked:!!M,h.defaultChecked=!!M,Se!=null&&typeof Se!="function"&&typeof Se!="symbol"&&typeof Se!="boolean"&&(h.name=Se),ma(h)}function un(h,w,_){w==="number"&&Za(h.ownerDocument)===h||h.defaultValue===""+_||(h.defaultValue=""+_)}function Mr(h,w,_,M){if(h=h.options,w){w={};for(var W=0;W<_.length;W++)w["$"+_[W]]=!0;for(_=0;_<h.length;_++)W=w.hasOwnProperty("$"+h[_].value),h[_].selected!==W&&(h[_].selected=W),W&&M&&(h[_].defaultSelected=!0)}else{for(_=""+da(_),w=null,W=0;W<h.length;W++){if(h[W].value===_){h[W].selected=!0,M&&(h[W].defaultSelected=!0);return}w!==null||h[W].disabled||(w=h[W])}w!==null&&(w.selected=!0)}}function cr(h,w,_){if(w!=null&&(w=""+da(w),w!==h.value&&(h.value=w),_==null)){h.defaultValue!==w&&(h.defaultValue=w);return}h.defaultValue=_!=null?""+da(_):""}function yn(h,w,_,M){if(w==null){if(M!=null){if(_!=null)throw Error(n(92));if(Y(M)){if(1<M.length)throw Error(n(93));M=M[0]}_=M}_==null&&(_=""),w=_}_=da(w),h.defaultValue=_,M=h.textContent,M===_&&M!==""&&M!==null&&(h.value=M),ma(h)}function yi(h,w){if(w){var _=h.firstChild;if(_&&_===h.lastChild&&_.nodeType===3){_.nodeValue=w;return}}h.textContent=w}var xs=new Set("animationIterationCount aspectRatio borderImageOutset borderImageSlice borderImageWidth boxFlex boxFlexGroup boxOrdinalGroup columnCount columns flex flexGrow flexPositive flexShrink flexNegative flexOrder gridArea gridRow gridRowEnd gridRowSpan gridRowStart gridColumn gridColumnEnd gridColumnSpan gridColumnStart fontWeight lineClamp lineHeight opacity order orphans scale tabSize widows zIndex zoom fillOpacity floodOpacity stopOpacity strokeDasharray strokeDashoffset strokeMiterlimit strokeOpacity strokeWidth MozAnimationIterationCount MozBoxFlex MozBoxFlexGroup MozLineClamp msAnimationIterationCount msFlex msZoom msFlexGrow msFlexNegative msFlexOrder msFlexPositive msFlexShrink msGridColumn msGridColumnSpan msGridRow msGridRowSpan WebkitAnimationIterationCount WebkitBoxFlex WebKitBoxFlexGroup WebkitBoxOrdinalGroup WebkitColumnCount WebkitColumns WebkitFlex WebkitFlexGrow WebkitFlexPositive WebkitFlexShrink WebkitLineClamp".split(" "));function _d(h,w,_){var M=w.indexOf("--")===0;_==null||typeof _=="boolean"||_===""?M?h.setProperty(w,""):w==="float"?h.cssFloat="":h[w]="":M?h.setProperty(w,_):typeof _!="number"||_===0||xs.has(w)?w==="float"?h.cssFloat=_:h[w]=(""+_).trim():h[w]=_+"px"}function Pd(h,w,_){if(w!=null&&typeof w!="object")throw Error(n(62));if(h=h.style,_!=null){for(var M in _)!_.hasOwnProperty(M)||w!=null&&w.hasOwnProperty(M)||(M.indexOf("--")===0?h.setProperty(M,""):M==="float"?h.cssFloat="":h[M]="");for(var W in w)M=w[W],w.hasOwnProperty(W)&&_[W]!==M&&_d(h,W,M)}else for(var ee in w)w.hasOwnProperty(ee)&&_d(h,ee,w[ee])}function Fl(h){if(h.indexOf("-")===-1)return!1;switch(h){case"annotation-xml":case"color-profile":case"font-face":case"font-face-src":case"font-face-uri":case"font-face-format":case"font-face-name":case"missing-glyph":return!1;default:return!0}}var zt=new Map([["acceptCharset","accept-charset"],["htmlFor","for"],["httpEquiv","http-equiv"],["crossOrigin","crossorigin"],["accentHeight","accent-height"],["alignmentBaseline","alignment-baseline"],["arabicForm","arabic-form"],["baselineShift","baseline-shift"],["capHeight","cap-height"],["clipPath","clip-path"],["clipRule","clip-rule"],["colorInterpolation","color-interpolation"],["colorInterpolationFilters","color-interpolation-filters"],["colorProfile","color-profile"],["colorRendering","color-rendering"],["dominantBaseline","dominant-baseline"],["enableBackground","enable-background"],["fillOpacity","fill-opacity"],["fillRule","fill-rule"],["floodColor","flood-color"],["floodOpacity","flood-opacity"],["fontFamily","font-family"],["fontSize","font-size"],["fontSizeAdjust","font-size-adjust"],["fontStretch","font-stretch"],["fontStyle","font-style"],["fontVariant","font-variant"],["fontWeight","font-weight"],["glyphName","glyph-name"],["glyphOrientationHorizontal","glyph-orientation-horizontal"],["glyphOrientationVertical","glyph-orientation-vertical"],["horizAdvX","horiz-adv-x"],["horizOriginX","horiz-origin-x"],["imageRendering","image-rendering"],["letterSpacing","letter-spacing"],["lightingColor","lighting-color"],["markerEnd","marker-end"],["markerMid","marker-mid"],["markerStart","marker-start"],["overlinePosition","overline-position"],["overlineThickness","overline-thickness"],["paintOrder","paint-order"],["panose-1","panose-1"],["pointerEvents","pointer-events"],["renderingIntent","rendering-intent"],["shapeRendering","shape-rendering"],["stopColor","stop-color"],["stopOpacity","stop-opacity"],["strikethroughPosition","strikethrough-position"],["strikethroughThickness","strikethrough-thickness"],["strokeDasharray","stroke-dasharray"],["strokeDashoffset","stroke-dashoffset"],["strokeLinecap","stroke-linecap"],["strokeLinejoin","stroke-linejoin"],["strokeMiterlimit","stroke-miterlimit"],["strokeOpacity","stroke-opacity"],["strokeWidth","stroke-width"],["textAnchor","text-anchor"],["textDecoration","text-decoration"],["textRendering","text-rendering"],["transformOrigin","transform-origin"],["underlinePosition","underline-position"],["underlineThickness","underline-thickness"],["unicodeBidi","unicode-bidi"],["unicodeRange","unicode-range"],["unitsPerEm","units-per-em"],["vAlphabetic","v-alphabetic"],["vHanging","v-hanging"],["vIdeographic","v-ideographic"],["vMathematical","v-mathematical"],["vectorEffect","vector-effect"],["vertAdvY","vert-adv-y"],["vertOriginX","vert-origin-x"],["vertOriginY","vert-origin-y"],["wordSpacing","word-spacing"],["writingMode","writing-mode"],["xmlnsXlink","xmlns:xlink"],["xHeight","x-height"]]),Ba=/^[\u0000-\u001F ]*j[\r\n\t]*a[\r\n\t]*v[\r\n\t]*a[\r\n\t]*s[\r\n\t]*c[\r\n\t]*r[\r\n\t]*i[\r\n\t]*p[\r\n\t]*t[\r\n\t]*:/i;function dr(h){return Ba.test(""+h)?"javascript:throw new Error('React has blocked a javascript: URL as a security precaution.')":h}function Kt(){}var Ll=null;function mn(h){return h=h.target||h.srcElement||window,h.correspondingUseElement&&(h=h.correspondingUseElement),h.nodeType===3?h.parentNode:h}var Rl=null,jo=null;function yf(h){var w=we(h);if(w&&(h=w.stateNode)){var _=h[Pt]||null;e:switch(h=w.stateNode,w.type){case"input":if(Un(h,_.value,_.defaultValue,_.defaultValue,_.checked,_.defaultChecked,_.type,_.name),w=_.name,_.type==="radio"&&w!=null){for(_=h;_.parentNode;)_=_.parentNode;for(_=_.querySelectorAll('input[name="'+Oa(""+w)+'"][type="radio"]'),w=0;w<_.length;w++){var M=_[w];if(M!==h&&M.form===h.form){var W=M[Pt]||null;if(!W)throw Error(n(90));Un(M,W.value,W.defaultValue,W.defaultValue,W.checked,W.defaultChecked,W.type,W.name)}}for(w=0;w<_.length;w++)M=_[w],M.form===h.form&&Na(M)}break e;case"textarea":cr(h,_.value,_.defaultValue);break e;case"select":w=_.value,w!=null&&Mr(h,!!_.multiple,w,!1)}}}var Bs=!1;function gp(h,w,_){if(Bs)return h(w,_);Bs=!0;try{var M=h(w);return M}finally{if(Bs=!1,(Rl!==null||jo!==null)&&(c_(),Rl&&(w=Rl,h=jo,jo=Rl=null,yf(w),h)))for(w=0;w<h.length;w++)yf(h[w])}}function zc(h,w){var _=h.stateNode;if(_===null)return null;var M=_[Pt]||null;if(M===null)return null;_=M[w];e:switch(w){case"onClick":case"onClickCapture":case"onDoubleClick":case"onDoubleClickCapture":case"onMouseDown":case"onMouseDownCapture":case"onMouseMove":case"onMouseMoveCapture":case"onMouseUp":case"onMouseUpCapture":case"onMouseEnter":(M=!M.disabled)||(h=h.type,M=!(h==="button"||h==="input"||h==="select"||h==="textarea")),h=!M;break e;default:h=!1}if(h)return null;if(_&&typeof _!="function")throw Error(n(231,w,typeof _));return _}var Ja=!(typeof window>"u"||typeof window.document>"u"||typeof window.document.createElement>"u"),bp=!1;if(Ja)try{var Cd={};Object.defineProperty(Cd,"passive",{get:function(){bp=!0}}),window.addEventListener("test",Cd,Cd),window.removeEventListener("test",Cd,Cd)}catch{bp=!1}var li=null,Eu=null,vi=null;function vf(){if(vi)return vi;var h,w=Eu,_=w.length,M,W="value"in li?li.value:li.textContent,ee=W.length;for(h=0;h<_&&w[h]===W[h];h++);var Se=_-h;for(M=1;M<=Se&&w[_-M]===W[ee-M];M++);return vi=W.slice(h,1<M?1-M:void 0)}function xp(h){var w=h.keyCode;return"charCode"in h?(h=h.charCode,h===0&&w===13&&(h=13)):h=w,h===10&&(h=13),32<=h||h===13?h:0}function Kn(){return!0}function Ic(){return!1}function ci(h){function w(_,M,W,ee,Se){this._reactName=_,this._targetInst=W,this.type=M,this.nativeEvent=ee,this.target=Se,this.currentTarget=null;for(var He in h)h.hasOwnProperty(He)&&(_=h[He],this[He]=_?_(ee):ee[He]);return this.isDefaultPrevented=(ee.defaultPrevented!=null?ee.defaultPrevented:ee.returnValue===!1)?Kn:Ic,this.isPropagationStopped=Ic,this}return m(w.prototype,{preventDefault:function(){this.defaultPrevented=!0;var _=this.nativeEvent;_&&(_.preventDefault?_.preventDefault():typeof _.returnValue!="unknown"&&(_.returnValue=!1),this.isDefaultPrevented=Kn)},stopPropagation:function(){var _=this.nativeEvent;_&&(_.stopPropagation?_.stopPropagation():typeof _.cancelBubble!="unknown"&&(_.cancelBubble=!0),this.isPropagationStopped=Kn)},persist:function(){},isPersistent:Kn}),w}var al={eventPhase:0,bubbles:0,cancelable:0,timeStamp:function(h){return h.timeStamp||Date.now()},defaultPrevented:0,isTrusted:0},Mo=ci(al),zl=m({},al,{view:0,detail:0}),Oc=ci(zl),Du,Il,Ol,Us=m({},zl,{screenX:0,screenY:0,clientX:0,clientY:0,pageX:0,pageY:0,ctrlKey:0,shiftKey:0,altKey:0,metaKey:0,getModifierState:Td,button:0,buttons:0,relatedTarget:function(h){return h.relatedTarget===void 0?h.fromElement===h.srcElement?h.toElement:h.fromElement:h.relatedTarget},movementX:function(h){return"movementX"in h?h.movementX:(h!==Ol&&(Ol&&h.type==="mousemove"?(Du=h.screenX-Ol.screenX,Il=h.screenY-Ol.screenY):Il=Du=0,Ol=h),Du)},movementY:function(h){return"movementY"in h?h.movementY:Il}}),rl=ci(Us),kb=m({},Us,{dataTransfer:0}),_v=ci(kb),_b=m({},zl,{relatedTarget:0}),yp=ci(_b),Pv=m({},al,{animationName:0,elapsedTime:0,pseudoElement:0}),Fu=ci(Pv),vp=m({},al,{clipboardData:function(h){return"clipboardData"in h?h.clipboardData:window.clipboardData}}),Bl=ci(vp),Ul=m({},al,{data:0}),Hl=ci(Ul),Bc={Esc:"Escape",Spacebar:" ",Left:"ArrowLeft",Up:"ArrowUp",Right:"ArrowRight",Down:"ArrowDown",Del:"Delete",Win:"OS",Menu:"ContextMenu",Apps:"ContextMenu",Scroll:"ScrollLock",MozPrintableKey:"Unidentified"},ys={8:"Backspace",9:"Tab",12:"Clear",13:"Enter",16:"Shift",17:"Control",18:"Alt",19:"Pause",20:"CapsLock",27:"Escape",32:" ",33:"PageUp",34:"PageDown",35:"End",36:"Home",37:"ArrowLeft",38:"ArrowUp",39:"ArrowRight",40:"ArrowDown",45:"Insert",46:"Delete",112:"F1",113:"F2",114:"F3",115:"F4",116:"F5",117:"F6",118:"F7",119:"F8",120:"F9",121:"F10",122:"F11",123:"F12",144:"NumLock",145:"ScrollLock",224:"Meta"},Nd={Alt:"altKey",Control:"ctrlKey",Meta:"metaKey",Shift:"shiftKey"};function Lu(h){var w=this.nativeEvent;return w.getModifierState?w.getModifierState(h):(h=Nd[h])?!!w[h]:!1}function Td(){return Lu}var Ad=m({},zl,{key:function(h){if(h.key){var w=Bc[h.key]||h.key;if(w!=="Unidentified")return w}return h.type==="keypress"?(h=xp(h),h===13?"Enter":String.fromCharCode(h)):h.type==="keydown"||h.type==="keyup"?ys[h.keyCode]||"Unidentified":""},code:0,location:0,ctrlKey:0,shiftKey:0,altKey:0,metaKey:0,repeat:0,locale:0,getModifierState:Td,charCode:function(h){return h.type==="keypress"?xp(h):0},keyCode:function(h){return h.type==="keydown"||h.type==="keyup"?h.keyCode:0},which:function(h){return h.type==="keypress"?xp(h):h.type==="keydown"||h.type==="keyup"?h.keyCode:0}}),nl=ci(Ad),_a=m({},Us,{pointerId:0,width:0,height:0,pressure:0,tangentialPressure:0,tiltX:0,tiltY:0,twist:0,pointerType:0,isPrimary:0}),Uc=ci(_a),jd=m({},zl,{touches:0,targetTouches:0,changedTouches:0,altKey:0,metaKey:0,ctrlKey:0,shiftKey:0,getModifierState:Td}),Ru=ci(jd),wf=m({},al,{propertyName:0,elapsedTime:0,pseudoElement:0}),Pb=ci(wf),ql=m({},Us,{deltaX:function(h){return"deltaX"in h?h.deltaX:"wheelDeltaX"in h?-h.wheelDeltaX:0},deltaY:function(h){return"deltaY"in h?h.deltaY:"wheelDeltaY"in h?-h.wheelDeltaY:"wheelDelta"in h?-h.wheelDelta:0},deltaZ:0,deltaMode:0}),Sf=ci(ql),wp=m({},al,{newState:0,oldState:0}),Cb=ci(wp),Cv=[9,13,27,32],il=Ja&&"CompositionEvent"in window,di=null;Ja&&"documentMode"in document&&(di=document.documentMode);var Hs=Ja&&"TextEvent"in window&&!di,zu=Ja&&(!il||di&&8<di&&11>=di),Sp=" ",Nb=!1;function ye(h,w){switch(h){case"keyup":return Cv.indexOf(w.keyCode)!==-1;case"keydown":return w.keyCode!==229;case"keypress":case"mousedown":case"focusout":return!0;default:return!1}}function Ot(h){return h=h.detail,typeof h=="object"&&"data"in h?h.data:null}var la=!1;function Ta(h,w){switch(h){case"compositionend":return Ot(w);case"keypress":return w.which!==32?null:(Nb=!0,Sp);case"textInput":return h=w.data,h===Sp&&Nb?null:h;default:return null}}function Ha(h,w){if(la)return h==="compositionend"||!il&&ye(h,w)?(h=vf(),vi=Eu=li=null,la=!1,h):null;switch(h){case"paste":return null;case"keypress":if(!(w.ctrlKey||w.altKey||w.metaKey)||w.ctrlKey&&w.altKey){if(w.char&&1<w.char.length)return w.char;if(w.which)return String.fromCharCode(w.which)}return null;case"compositionend":return zu&&w.locale!=="ko"?null:w.data;default:return null}}var ut={color:!0,date:!0,datetime:!0,"datetime-local":!0,email:!0,month:!0,number:!0,password:!0,range:!0,search:!0,tel:!0,text:!0,time:!0,url:!0,week:!0};function Ht(h){var w=h&&h.nodeName&&h.nodeName.toLowerCase();return w==="input"?!!ut[h.type]:w==="textarea"}function Qt(h,w,_,M){Rl?jo?jo.push(M):jo=[M]:Rl=M,w=g_(w,"onChange"),0<w.length&&(_=new Mo("onChange","change",null,_,M),h.push({event:_,listeners:w}))}var mt=null,ja=null;function Or(h){WH(h,0)}function Va(h){var w=Ge(h);if(Na(w))return h}function pn(h,w){if(h==="change")return w}var jn=!1;if(Ja){var na;if(Ja){var Pa="oninput"in document;if(!Pa){var Mn=document.createElement("div");Mn.setAttribute("oninput","return;"),Pa=typeof Mn.oninput=="function"}na=Pa}else na=!1;jn=na&&(!document.documentMode||9<document.documentMode)}function ui(){mt&&(mt.detachEvent("onpropertychange",zi),ja=mt=null)}function zi(h){if(h.propertyName==="value"&&Va(ja)){var w=[];Qt(w,ja,h,mn(h)),gp(Or,w)}}function Hc(h,w,_){h==="focusin"?(ui(),mt=w,ja=_,mt.attachEvent("onpropertychange",zi)):h==="focusout"&&ui()}function qc(h){if(h==="selectionchange"||h==="keyup"||h==="keydown")return Va(ja)}function Iu(h,w){if(h==="click")return Va(w)}function $r(h,w){if(h==="input"||h==="change")return Va(w)}function Yn(h,w){return h===w&&(h!==0||1/h===1/w)||h!==h&&w!==w}var En=typeof Object.is=="function"?Object.is:Yn;function vs(h,w){if(En(h,w))return!0;if(typeof h!="object"||h===null||typeof w!="object"||w===null)return!1;var _=Object.keys(h),M=Object.keys(w);if(_.length!==M.length)return!1;for(M=0;M<_.length;M++){var W=_[M];if(!se.call(w,W)||!En(h[W],w[W]))return!1}return!0}function Eo(h){for(;h&&h.firstChild;)h=h.firstChild;return h}function Zr(h,w){var _=Eo(h);h=0;for(var M;_;){if(_.nodeType===3){if(M=h+_.textContent.length,h<=w&&M>=w)return{node:_,offset:w-h};h=M}e:{for(;_;){if(_.nextSibling){_=_.nextSibling;break e}_=_.parentNode}_=void 0}_=Eo(_)}}function Do(h,w){return h&&w?h===w?!0:h&&h.nodeType===3?!1:w&&w.nodeType===3?Do(h,w.parentNode):"contains"in h?h.contains(w):h.compareDocumentPosition?!!(h.compareDocumentPosition(w)&16):!1:!1}function uo(h){h=h!=null&&h.ownerDocument!=null&&h.ownerDocument.defaultView!=null?h.ownerDocument.defaultView:window;for(var w=Za(h.document);w instanceof h.HTMLIFrameElement;){try{var _=typeof w.contentWindow.location.href=="string"}catch{_=!1}if(_)h=w.contentWindow;else break;w=Za(h.document)}return w}function wi(h){var w=h&&h.nodeName&&h.nodeName.toLowerCase();return w&&(w==="input"&&(h.type==="text"||h.type==="search"||h.type==="tel"||h.type==="url"||h.type==="password")||w==="textarea"||h.contentEditable==="true")}var Md=Ja&&"documentMode"in document&&11>=document.documentMode,mi=null,fr=null,Er=null,Qn=!1;function kp(h,w,_){var M=_.window===_?_.document:_.nodeType===9?_:_.ownerDocument;Qn||mi==null||mi!==Za(M)||(M=mi,"selectionStart"in M&&wi(M)?M={start:M.selectionStart,end:M.selectionEnd}:(M=(M.ownerDocument&&M.ownerDocument.defaultView||window).getSelection(),M={anchorNode:M.anchorNode,anchorOffset:M.anchorOffset,focusNode:M.focusNode,focusOffset:M.focusOffset}),Er&&vs(Er,M)||(Er=M,M=g_(fr,"onSelect"),0<M.length&&(w=new Mo("onSelect","select",null,w,_),h.push({event:w,listeners:M}),w.target=mi)))}function ca(h,w){var _={};return _[h.toLowerCase()]=w.toLowerCase(),_["Webkit"+h]="webkit"+w,_["Moz"+h]="moz"+w,_}var Gc={animationend:ca("Animation","AnimationEnd"),animationiteration:ca("Animation","AnimationIteration"),animationstart:ca("Animation","AnimationStart"),transitionrun:ca("Transition","TransitionRun"),transitionstart:ca("Transition","TransitionStart"),transitioncancel:ca("Transition","TransitionCancel"),transitionend:ca("Transition","TransitionEnd")},Jr={},kf={};Ja&&(kf=document.createElement("div").style,"AnimationEvent"in window||(delete Gc.animationend.animation,delete Gc.animationiteration.animation,delete Gc.animationstart.animation),"TransitionEvent"in window||delete Gc.transitionend.transition);function Ed(h){if(Jr[h])return Jr[h];if(!Gc[h])return h;var w=Gc[h],_;for(_ in w)if(w.hasOwnProperty(_)&&_ in kf)return Jr[h]=w[_];return h}var Nk=Ed("animationend"),Tk=Ed("animationiteration"),P5=Ed("animationstart"),Hde=Ed("transitionrun"),qde=Ed("transitionstart"),Gde=Ed("transitioncancel"),C5=Ed("transitionend"),N5=new Map,bj="abort auxClick beforeToggle cancel canPlay canPlayThrough click close contextMenu copy cut drag dragEnd dragEnter dragExit dragLeave dragOver dragStart drop durationChange emptied encrypted ended error gotPointerCapture input invalid keyDown keyPress keyUp load loadedData loadedMetadata loadStart lostPointerCapture mouseDown mouseMove mouseOut mouseOver mouseUp paste pause play playing pointerCancel pointerDown pointerMove pointerOut pointerOver pointerUp progress rateChange reset resize seeked seeking stalled submit suspend timeUpdate touchCancel touchEnd touchStart volumeChange scroll toggle touchMove waiting wheel".split(" ");bj.push("scrollEnd");function $c(h,w){N5.set(h,w),_t(w,[h])}var Ak=typeof reportError=="function"?reportError:function(h){if(typeof window=="object"&&typeof window.ErrorEvent=="function"){var w=new window.ErrorEvent("error",{bubbles:!0,cancelable:!0,message:typeof h=="object"&&h!==null&&typeof h.message=="string"?String(h.message):String(h),error:h});if(!window.dispatchEvent(w))return}else if(typeof process=="object"&&typeof process.emit=="function"){process.emit("uncaughtException",h);return}console.error(h)},Gl=[],Tb=0,xj=0;function jk(){for(var h=Tb,w=xj=Tb=0;w<h;){var _=Gl[w];Gl[w++]=null;var M=Gl[w];Gl[w++]=null;var W=Gl[w];Gl[w++]=null;var ee=Gl[w];if(Gl[w++]=null,M!==null&&W!==null){var Se=M.pending;Se===null?W.next=W:(W.next=Se.next,Se.next=W),M.pending=W}ee!==0&&T5(_,W,ee)}}function Mk(h,w,_,M){Gl[Tb++]=h,Gl[Tb++]=w,Gl[Tb++]=_,Gl[Tb++]=M,xj|=M,h.lanes|=M,h=h.alternate,h!==null&&(h.lanes|=M)}function yj(h,w,_,M){return Mk(h,w,_,M),Ek(h)}function _f(h,w){return Mk(h,null,null,w),Ek(h)}function T5(h,w,_){h.lanes|=_;var M=h.alternate;M!==null&&(M.lanes|=_);for(var W=!1,ee=h.return;ee!==null;)ee.childLanes|=_,M=ee.alternate,M!==null&&(M.childLanes|=_),ee.tag===22&&(h=ee.stateNode,h===null||h._visibility&1||(W=!0)),h=ee,ee=ee.return;return h.tag===3?(ee=h.stateNode,W&&w!==null&&(W=31-qe(_),h=ee.hiddenUpdates,M=h[W],M===null?h[W]=[w]:M.push(w),w.lane=_|536870912),ee):null}function Ek(h){if(50<Kv)throw Kv=0,TM=null,Error(n(185));for(var w=h.return;w!==null;)h=w,w=h.return;return h.tag===3?h.stateNode:null}var Ab={};function $de(h,w,_,M){this.tag=h,this.key=_,this.sibling=this.child=this.return=this.stateNode=this.type=this.elementType=null,this.index=0,this.refCleanup=this.ref=null,this.pendingProps=w,this.dependencies=this.memoizedState=this.updateQueue=this.memoizedProps=null,this.mode=M,this.subtreeFlags=this.flags=0,this.deletions=null,this.childLanes=this.lanes=0,this.alternate=null}function sl(h,w,_,M){return new $de(h,w,_,M)}function vj(h){return h=h.prototype,!(!h||!h.isReactComponent)}function Ou(h,w){var _=h.alternate;return _===null?(_=sl(h.tag,w,h.key,h.mode),_.elementType=h.elementType,_.type=h.type,_.stateNode=h.stateNode,_.alternate=h,h.alternate=_):(_.pendingProps=w,_.type=h.type,_.flags=0,_.subtreeFlags=0,_.deletions=null),_.flags=h.flags&65011712,_.childLanes=h.childLanes,_.lanes=h.lanes,_.child=h.child,_.memoizedProps=h.memoizedProps,_.memoizedState=h.memoizedState,_.updateQueue=h.updateQueue,w=h.dependencies,_.dependencies=w===null?null:{lanes:w.lanes,firstContext:w.firstContext},_.sibling=h.sibling,_.index=h.index,_.ref=h.ref,_.refCleanup=h.refCleanup,_}function A5(h,w){h.flags&=65011714;var _=h.alternate;return _===null?(h.childLanes=0,h.lanes=w,h.child=null,h.subtreeFlags=0,h.memoizedProps=null,h.memoizedState=null,h.updateQueue=null,h.dependencies=null,h.stateNode=null):(h.childLanes=_.childLanes,h.lanes=_.lanes,h.child=_.child,h.subtreeFlags=0,h.deletions=null,h.memoizedProps=_.memoizedProps,h.memoizedState=_.memoizedState,h.updateQueue=_.updateQueue,h.type=_.type,w=_.dependencies,h.dependencies=w===null?null:{lanes:w.lanes,firstContext:w.firstContext}),h}function Dk(h,w,_,M,W,ee){var Se=0;if(M=h,typeof h=="function")vj(h)&&(Se=1);else if(typeof h=="string")Se=Que(h,_,pe.current)?26:h==="html"||h==="head"||h==="body"?27:5;else e:switch(h){case P:return h=sl(31,_,w,W),h.elementType=P,h.lanes=ee,h;case v:return Pf(_.children,W,ee,w);case b:Se=8,W|=24;break;case x:return h=sl(12,_,w,W|2),h.elementType=x,h.lanes=ee,h;case N:return h=sl(13,_,w,W),h.elementType=N,h.lanes=ee,h;case T:return h=sl(19,_,w,W),h.elementType=T,h.lanes=ee,h;default:if(typeof h=="object"&&h!==null)switch(h.$$typeof){case k:Se=10;break e;case S:Se=9;break e;case C:Se=11;break e;case j:Se=14;break e;case D:Se=16,M=null;break e}Se=29,_=Error(n(130,h===null?"null":typeof h,"")),M=null}return w=sl(Se,_,w,W),w.elementType=h,w.type=M,w.lanes=ee,w}function Pf(h,w,_,M){return h=sl(7,h,M,w),h.lanes=_,h}function wj(h,w,_){return h=sl(6,h,null,w),h.lanes=_,h}function j5(h){var w=sl(18,null,null,0);return w.stateNode=h,w}function Sj(h,w,_){return w=sl(4,h.children!==null?h.children:[],h.key,w),w.lanes=_,w.stateNode={containerInfo:h.containerInfo,pendingChildren:null,implementation:h.implementation},w}var M5=new WeakMap;function $l(h,w){if(typeof h=="object"&&h!==null){var _=M5.get(h);return _!==void 0?_:(w={value:h,source:w,stack:ie(w)},M5.set(h,w),w)}return{value:h,source:w,stack:ie(w)}}var jb=[],Mb=0,Fk=null,Nv=0,Vl=[],Wl=0,_p=null,Dd=1,Fd="";function Bu(h,w){jb[Mb++]=Nv,jb[Mb++]=Fk,Fk=h,Nv=w}function E5(h,w,_){Vl[Wl++]=Dd,Vl[Wl++]=Fd,Vl[Wl++]=_p,_p=h;var M=Dd;h=Fd;var W=32-qe(M)-1;M&=~(1<<W),_+=1;var ee=32-qe(w)+W;if(30<ee){var Se=W-W%5;ee=(M&(1<<Se)-1).toString(32),M>>=Se,W-=Se,Dd=1<<32-qe(w)+W|_<<W|M,Fd=ee+h}else Dd=1<<ee|_<<W|M,Fd=h}function kj(h){h.return!==null&&(Bu(h,1),E5(h,1,0))}function _j(h){for(;h===Fk;)Fk=jb[--Mb],jb[Mb]=null,Nv=jb[--Mb],jb[Mb]=null;for(;h===_p;)_p=Vl[--Wl],Vl[Wl]=null,Fd=Vl[--Wl],Vl[Wl]=null,Dd=Vl[--Wl],Vl[Wl]=null}function D5(h,w){Vl[Wl++]=Dd,Vl[Wl++]=Fd,Vl[Wl++]=_p,Dd=w.id,Fd=w.overflow,_p=h}var ws=null,Pn=null,Cr=!1,Pp=null,Kl=!1,Pj=Error(n(519));function Cp(h){var w=Error(n(418,1<arguments.length&&arguments[1]!==void 0&&arguments[1]?"text":"HTML",""));throw Tv($l(w,h)),Pj}function F5(h){var w=h.stateNode,_=h.type,M=h.memoizedProps;switch(w[vt]=h,w[Pt]=M,_){case"dialog":wr("cancel",w),wr("close",w);break;case"iframe":case"object":case"embed":wr("load",w);break;case"video":case"audio":for(_=0;_<Qv.length;_++)wr(Qv[_],w);break;case"source":wr("error",w);break;case"img":case"image":case"link":wr("error",w),wr("load",w);break;case"details":wr("toggle",w);break;case"input":wr("invalid",w),Ua(w,M.value,M.defaultValue,M.checked,M.defaultChecked,M.type,M.name,!0);break;case"select":wr("invalid",w);break;case"textarea":wr("invalid",w),yn(w,M.value,M.defaultValue,M.children)}_=M.children,typeof _!="string"&&typeof _!="number"&&typeof _!="bigint"||w.textContent===""+_||M.suppressHydrationWarning===!0||XH(w.textContent,_)?(M.popover!=null&&(wr("beforetoggle",w),wr("toggle",w)),M.onScroll!=null&&wr("scroll",w),M.onScrollEnd!=null&&wr("scrollend",w),M.onClick!=null&&(w.onclick=Kt),w=!0):w=!1,w||Cp(h,!0)}function L5(h){for(ws=h.return;ws;)switch(ws.tag){case 5:case 31:case 13:Kl=!1;return;case 27:case 3:Kl=!0;return;default:ws=ws.return}}function Eb(h){if(h!==ws)return!1;if(!Cr)return L5(h),Cr=!0,!1;var w=h.tag,_;if((_=w!==3&&w!==27)&&((_=w===5)&&(_=h.type,_=!(_!=="form"&&_!=="button")||qM(h.type,h.memoizedProps)),_=!_),_&&Pn&&Cp(h),L5(h),w===13){if(h=h.memoizedState,h=h!==null?h.dehydrated:null,!h)throw Error(n(317));Pn=sq(h)}else if(w===31){if(h=h.memoizedState,h=h!==null?h.dehydrated:null,!h)throw Error(n(317));Pn=sq(h)}else w===27?(w=Pn,Bp(h.type)?(h=KM,KM=null,Pn=h):Pn=w):Pn=ws?Ql(h.stateNode.nextSibling):null;return!0}function Cf(){Pn=ws=null,Cr=!1}function Cj(){var h=Pp;return h!==null&&(zo===null?zo=h:zo.push.apply(zo,h),Pp=null),h}function Tv(h){Pp===null?Pp=[h]:Pp.push(h)}var Nj=Q(null),Nf=null,Uu=null;function Np(h,w,_){me(Nj,w._currentValue),w._currentValue=_}function Hu(h){h._currentValue=Nj.current,re(Nj)}function Tj(h,w,_){for(;h!==null;){var M=h.alternate;if((h.childLanes&w)!==w?(h.childLanes|=w,M!==null&&(M.childLanes|=w)):M!==null&&(M.childLanes&w)!==w&&(M.childLanes|=w),h===_)break;h=h.return}}function Aj(h,w,_,M){var W=h.child;for(W!==null&&(W.return=h);W!==null;){var ee=W.dependencies;if(ee!==null){var Se=W.child;ee=ee.firstContext;e:for(;ee!==null;){var He=ee;ee=W;for(var pt=0;pt<w.length;pt++)if(He.context===w[pt]){ee.lanes|=_,He=ee.alternate,He!==null&&(He.lanes|=_),Tj(ee.return,_,h),M||(Se=null);break e}ee=He.next}}else if(W.tag===18){if(Se=W.return,Se===null)throw Error(n(341));Se.lanes|=_,ee=Se.alternate,ee!==null&&(ee.lanes|=_),Tj(Se,_,h),Se=null}else Se=W.child;if(Se!==null)Se.return=W;else for(Se=W;Se!==null;){if(Se===h){Se=null;break}if(W=Se.sibling,W!==null){W.return=Se.return,Se=W;break}Se=Se.return}W=Se}}function Db(h,w,_,M){h=null;for(var W=w,ee=!1;W!==null;){if(!ee){if((W.flags&524288)!==0)ee=!0;else if((W.flags&262144)!==0)break}if(W.tag===10){var Se=W.alternate;if(Se===null)throw Error(n(387));if(Se=Se.memoizedProps,Se!==null){var He=W.type;En(W.pendingProps.value,Se.value)||(h!==null?h.push(He):h=[He])}}else if(W===Z.current){if(Se=W.alternate,Se===null)throw Error(n(387));Se.memoizedState.memoizedState!==W.memoizedState.memoizedState&&(h!==null?h.push(t0):h=[t0])}W=W.return}h!==null&&Aj(w,h,_,M),w.flags|=262144}function Lk(h){for(h=h.firstContext;h!==null;){if(!En(h.context._currentValue,h.memoizedValue))return!0;h=h.next}return!1}function Tf(h){Nf=h,Uu=null,h=h.dependencies,h!==null&&(h.firstContext=null)}function Ss(h){return R5(Nf,h)}function Rk(h,w){return Nf===null&&Tf(h),R5(h,w)}function R5(h,w){var _=w._currentValue;if(w={context:w,memoizedValue:_,next:null},Uu===null){if(h===null)throw Error(n(308));Uu=w,h.dependencies={lanes:0,firstContext:w},h.flags|=524288}else Uu=Uu.next=w;return _}var Vde=typeof AbortController<"u"?AbortController:function(){var h=[],w=this.signal={aborted:!1,addEventListener:function(_,M){h.push(M)}};this.abort=function(){w.aborted=!0,h.forEach(function(_){return _()})}},Wde=t.unstable_scheduleCallback,Kde=t.unstable_NormalPriority,Si={$$typeof:k,Consumer:null,Provider:null,_currentValue:null,_currentValue2:null,_threadCount:0};function jj(){return{controller:new Vde,data:new Map,refCount:0}}function Av(h){h.refCount--,h.refCount===0&&Wde(Kde,function(){h.controller.abort()})}var jv=null,Mj=0,Fb=0,Lb=null;function Yde(h,w){if(jv===null){var _=jv=[];Mj=0,Fb=FM(),Lb={status:"pending",value:void 0,then:function(M){_.push(M)}}}return Mj++,w.then(z5,z5),w}function z5(){if(--Mj===0&&jv!==null){Lb!==null&&(Lb.status="fulfilled");var h=jv;jv=null,Fb=0,Lb=null;for(var w=0;w<h.length;w++)(0,h[w])()}}function Qde(h,w){var _=[],M={status:"pending",value:null,reason:null,then:function(W){_.push(W)}};return h.then(function(){M.status="fulfilled",M.value=w;for(var W=0;W<_.length;W++)(0,_[W])(w)},function(W){for(M.status="rejected",M.reason=W,W=0;W<_.length;W++)(0,_[W])(void 0)}),M}var I5=te.S;te.S=function(h,w){wH=z(),typeof w=="object"&&w!==null&&typeof w.then=="function"&&Yde(h,w),I5!==null&&I5(h,w)};var Af=Q(null);function Ej(){var h=Af.current;return h!==null?h:hn.pooledCache}function zk(h,w){w===null?me(Af,Af.current):me(Af,w.pool)}function O5(){var h=Ej();return h===null?null:{parent:Si._currentValue,pool:h}}var Rb=Error(n(460)),Dj=Error(n(474)),Ik=Error(n(542)),Ok={then:function(){}};function B5(h){return h=h.status,h==="fulfilled"||h==="rejected"}function U5(h,w,_){switch(_=h[_],_===void 0?h.push(w):_!==w&&(w.then(Kt,Kt),w=_),w.status){case"fulfilled":return w.value;case"rejected":throw h=w.reason,q5(h),h;default:if(typeof w.status=="string")w.then(Kt,Kt);else{if(h=hn,h!==null&&100<h.shellSuspendCounter)throw Error(n(482));h=w,h.status="pending",h.then(function(M){if(w.status==="pending"){var W=w;W.status="fulfilled",W.value=M}},function(M){if(w.status==="pending"){var W=w;W.status="rejected",W.reason=M}})}switch(w.status){case"fulfilled":return w.value;case"rejected":throw h=w.reason,q5(h),h}throw Mf=w,Rb}}function jf(h){try{var w=h._init;return w(h._payload)}catch(_){throw _!==null&&typeof _=="object"&&typeof _.then=="function"?(Mf=_,Rb):_}}var Mf=null;function H5(){if(Mf===null)throw Error(n(459));var h=Mf;return Mf=null,h}function q5(h){if(h===Rb||h===Ik)throw Error(n(483))}var zb=null,Mv=0;function Bk(h){var w=Mv;return Mv+=1,zb===null&&(zb=[]),U5(zb,h,w)}function Ev(h,w){w=w.props.ref,h.ref=w!==void 0?w:null}function Uk(h,w){throw w.$$typeof===p?Error(n(525)):(h=Object.prototype.toString.call(w),Error(n(31,h==="[object Object]"?"object with keys {"+Object.keys(w).join(", ")+"}":h)))}function G5(h){function w(kt,xt){if(h){var Mt=kt.deletions;Mt===null?(kt.deletions=[xt],kt.flags|=16):Mt.push(xt)}}function _(kt,xt){if(!h)return null;for(;xt!==null;)w(kt,xt),xt=xt.sibling;return null}function M(kt){for(var xt=new Map;kt!==null;)kt.key!==null?xt.set(kt.key,kt):xt.set(kt.index,kt),kt=kt.sibling;return xt}function W(kt,xt){return kt=Ou(kt,xt),kt.index=0,kt.sibling=null,kt}function ee(kt,xt,Mt){return kt.index=Mt,h?(Mt=kt.alternate,Mt!==null?(Mt=Mt.index,Mt<xt?(kt.flags|=67108866,xt):Mt):(kt.flags|=67108866,xt)):(kt.flags|=1048576,xt)}function Se(kt){return h&&kt.alternate===null&&(kt.flags|=67108866),kt}function He(kt,xt,Mt,$t){return xt===null||xt.tag!==6?(xt=wj(Mt,kt.mode,$t),xt.return=kt,xt):(xt=W(xt,Mt),xt.return=kt,xt)}function pt(kt,xt,Mt,$t){var Da=Mt.type;return Da===v?qt(kt,xt,Mt.props.children,$t,Mt.key):xt!==null&&(xt.elementType===Da||typeof Da=="object"&&Da!==null&&Da.$$typeof===D&&jf(Da)===xt.type)?(xt=W(xt,Mt.props),Ev(xt,Mt),xt.return=kt,xt):(xt=Dk(Mt.type,Mt.key,Mt.props,null,kt.mode,$t),Ev(xt,Mt),xt.return=kt,xt)}function Et(kt,xt,Mt,$t){return xt===null||xt.tag!==4||xt.stateNode.containerInfo!==Mt.containerInfo||xt.stateNode.implementation!==Mt.implementation?(xt=Sj(Mt,kt.mode,$t),xt.return=kt,xt):(xt=W(xt,Mt.children||[]),xt.return=kt,xt)}function qt(kt,xt,Mt,$t,Da){return xt===null||xt.tag!==7?(xt=Pf(Mt,kt.mode,$t,Da),xt.return=kt,xt):(xt=W(xt,Mt),xt.return=kt,xt)}function Wt(kt,xt,Mt){if(typeof xt=="string"&&xt!==""||typeof xt=="number"||typeof xt=="bigint")return xt=wj(""+xt,kt.mode,Mt),xt.return=kt,xt;if(typeof xt=="object"&&xt!==null){switch(xt.$$typeof){case f:return Mt=Dk(xt.type,xt.key,xt.props,null,kt.mode,Mt),Ev(Mt,xt),Mt.return=kt,Mt;case g:return xt=Sj(xt,kt.mode,Mt),xt.return=kt,xt;case D:return xt=jf(xt),Wt(kt,xt,Mt)}if(Y(xt)||O(xt))return xt=Pf(xt,kt.mode,Mt,null),xt.return=kt,xt;if(typeof xt.then=="function")return Wt(kt,Bk(xt),Mt);if(xt.$$typeof===k)return Wt(kt,Rk(kt,xt),Mt);Uk(kt,xt)}return null}function Lt(kt,xt,Mt,$t){var Da=xt!==null?xt.key:null;if(typeof Mt=="string"&&Mt!==""||typeof Mt=="number"||typeof Mt=="bigint")return Da!==null?null:He(kt,xt,""+Mt,$t);if(typeof Mt=="object"&&Mt!==null){switch(Mt.$$typeof){case f:return Mt.key===Da?pt(kt,xt,Mt,$t):null;case g:return Mt.key===Da?Et(kt,xt,Mt,$t):null;case D:return Mt=jf(Mt),Lt(kt,xt,Mt,$t)}if(Y(Mt)||O(Mt))return Da!==null?null:qt(kt,xt,Mt,$t,null);if(typeof Mt.then=="function")return Lt(kt,xt,Bk(Mt),$t);if(Mt.$$typeof===k)return Lt(kt,xt,Rk(kt,Mt),$t);Uk(kt,Mt)}return null}function Bt(kt,xt,Mt,$t,Da){if(typeof $t=="string"&&$t!==""||typeof $t=="number"||typeof $t=="bigint")return kt=kt.get(Mt)||null,He(xt,kt,""+$t,Da);if(typeof $t=="object"&&$t!==null){switch($t.$$typeof){case f:return kt=kt.get($t.key===null?Mt:$t.key)||null,pt(xt,kt,$t,Da);case g:return kt=kt.get($t.key===null?Mt:$t.key)||null,Et(xt,kt,$t,Da);case D:return $t=jf($t),Bt(kt,xt,Mt,$t,Da)}if(Y($t)||O($t))return kt=kt.get(Mt)||null,qt(xt,kt,$t,Da,null);if(typeof $t.then=="function")return Bt(kt,xt,Mt,Bk($t),Da);if($t.$$typeof===k)return Bt(kt,xt,Mt,Rk(xt,$t),Da);Uk(xt,$t)}return null}function wa(kt,xt,Mt,$t){for(var Da=null,Fr=null,Ca=xt,tr=xt=0,_r=null;Ca!==null&&tr<Mt.length;tr++){Ca.index>tr?(_r=Ca,Ca=null):_r=Ca.sibling;var Lr=Lt(kt,Ca,Mt[tr],$t);if(Lr===null){Ca===null&&(Ca=_r);break}h&&Ca&&Lr.alternate===null&&w(kt,Ca),xt=ee(Lr,xt,tr),Fr===null?Da=Lr:Fr.sibling=Lr,Fr=Lr,Ca=_r}if(tr===Mt.length)return _(kt,Ca),Cr&&Bu(kt,tr),Da;if(Ca===null){for(;tr<Mt.length;tr++)Ca=Wt(kt,Mt[tr],$t),Ca!==null&&(xt=ee(Ca,xt,tr),Fr===null?Da=Ca:Fr.sibling=Ca,Fr=Ca);return Cr&&Bu(kt,tr),Da}for(Ca=M(Ca);tr<Mt.length;tr++)_r=Bt(Ca,kt,tr,Mt[tr],$t),_r!==null&&(h&&_r.alternate!==null&&Ca.delete(_r.key===null?tr:_r.key),xt=ee(_r,xt,tr),Fr===null?Da=_r:Fr.sibling=_r,Fr=_r);return h&&Ca.forEach(function($p){return w(kt,$p)}),Cr&&Bu(kt,tr),Da}function za(kt,xt,Mt,$t){if(Mt==null)throw Error(n(151));for(var Da=null,Fr=null,Ca=xt,tr=xt=0,_r=null,Lr=Mt.next();Ca!==null&&!Lr.done;tr++,Lr=Mt.next()){Ca.index>tr?(_r=Ca,Ca=null):_r=Ca.sibling;var $p=Lt(kt,Ca,Lr.value,$t);if($p===null){Ca===null&&(Ca=_r);break}h&&Ca&&$p.alternate===null&&w(kt,Ca),xt=ee($p,xt,tr),Fr===null?Da=$p:Fr.sibling=$p,Fr=$p,Ca=_r}if(Lr.done)return _(kt,Ca),Cr&&Bu(kt,tr),Da;if(Ca===null){for(;!Lr.done;tr++,Lr=Mt.next())Lr=Wt(kt,Lr.value,$t),Lr!==null&&(xt=ee(Lr,xt,tr),Fr===null?Da=Lr:Fr.sibling=Lr,Fr=Lr);return Cr&&Bu(kt,tr),Da}for(Ca=M(Ca);!Lr.done;tr++,Lr=Mt.next())Lr=Bt(Ca,kt,tr,Lr.value,$t),Lr!==null&&(h&&Lr.alternate!==null&&Ca.delete(Lr.key===null?tr:Lr.key),xt=ee(Lr,xt,tr),Fr===null?Da=Lr:Fr.sibling=Lr,Fr=Lr);return h&&Ca.forEach(function(ome){return w(kt,ome)}),Cr&&Bu(kt,tr),Da}function an(kt,xt,Mt,$t){if(typeof Mt=="object"&&Mt!==null&&Mt.type===v&&Mt.key===null&&(Mt=Mt.props.children),typeof Mt=="object"&&Mt!==null){switch(Mt.$$typeof){case f:e:{for(var Da=Mt.key;xt!==null;){if(xt.key===Da){if(Da=Mt.type,Da===v){if(xt.tag===7){_(kt,xt.sibling),$t=W(xt,Mt.props.children),$t.return=kt,kt=$t;break e}}else if(xt.elementType===Da||typeof Da=="object"&&Da!==null&&Da.$$typeof===D&&jf(Da)===xt.type){_(kt,xt.sibling),$t=W(xt,Mt.props),Ev($t,Mt),$t.return=kt,kt=$t;break e}_(kt,xt);break}else w(kt,xt);xt=xt.sibling}Mt.type===v?($t=Pf(Mt.props.children,kt.mode,$t,Mt.key),$t.return=kt,kt=$t):($t=Dk(Mt.type,Mt.key,Mt.props,null,kt.mode,$t),Ev($t,Mt),$t.return=kt,kt=$t)}return Se(kt);case g:e:{for(Da=Mt.key;xt!==null;){if(xt.key===Da)if(xt.tag===4&&xt.stateNode.containerInfo===Mt.containerInfo&&xt.stateNode.implementation===Mt.implementation){_(kt,xt.sibling),$t=W(xt,Mt.children||[]),$t.return=kt,kt=$t;break e}else{_(kt,xt);break}else w(kt,xt);xt=xt.sibling}$t=Sj(Mt,kt.mode,$t),$t.return=kt,kt=$t}return Se(kt);case D:return Mt=jf(Mt),an(kt,xt,Mt,$t)}if(Y(Mt))return wa(kt,xt,Mt,$t);if(O(Mt)){if(Da=O(Mt),typeof Da!="function")throw Error(n(150));return Mt=Da.call(Mt),za(kt,xt,Mt,$t)}if(typeof Mt.then=="function")return an(kt,xt,Bk(Mt),$t);if(Mt.$$typeof===k)return an(kt,xt,Rk(kt,Mt),$t);Uk(kt,Mt)}return typeof Mt=="string"&&Mt!==""||typeof Mt=="number"||typeof Mt=="bigint"?(Mt=""+Mt,xt!==null&&xt.tag===6?(_(kt,xt.sibling),$t=W(xt,Mt),$t.return=kt,kt=$t):(_(kt,xt),$t=wj(Mt,kt.mode,$t),$t.return=kt,kt=$t),Se(kt)):_(kt,xt)}return function(kt,xt,Mt,$t){try{Mv=0;var Da=an(kt,xt,Mt,$t);return zb=null,Da}catch(Ca){if(Ca===Rb||Ca===Ik)throw Ca;var Fr=sl(29,Ca,null,kt.mode);return Fr.lanes=$t,Fr.return=kt,Fr}}}var Ef=G5(!0),$5=G5(!1),Tp=!1;function Fj(h){h.updateQueue={baseState:h.memoizedState,firstBaseUpdate:null,lastBaseUpdate:null,shared:{pending:null,lanes:0,hiddenCallbacks:null},callbacks:null}}function Lj(h,w){h=h.updateQueue,w.updateQueue===h&&(w.updateQueue={baseState:h.baseState,firstBaseUpdate:h.firstBaseUpdate,lastBaseUpdate:h.lastBaseUpdate,shared:h.shared,callbacks:null})}function Ap(h){return{lane:h,tag:0,payload:null,callback:null,next:null}}function jp(h,w,_){var M=h.updateQueue;if(M===null)return null;if(M=M.shared,(Br&2)!==0){var W=M.pending;return W===null?w.next=w:(w.next=W.next,W.next=w),M.pending=w,w=Ek(h),T5(h,null,_),w}return Mk(h,M,w,_),Ek(h)}function Dv(h,w,_){if(w=w.updateQueue,w!==null&&(w=w.shared,(_&4194048)!==0)){var M=w.lanes;M&=h.pendingLanes,_|=M,w.lanes=_,Ut(h,_)}}function Rj(h,w){var _=h.updateQueue,M=h.alternate;if(M!==null&&(M=M.updateQueue,_===M)){var W=null,ee=null;if(_=_.firstBaseUpdate,_!==null){do{var Se={lane:_.lane,tag:_.tag,payload:_.payload,callback:null,next:null};ee===null?W=ee=Se:ee=ee.next=Se,_=_.next}while(_!==null);ee===null?W=ee=w:ee=ee.next=w}else W=ee=w;_={baseState:M.baseState,firstBaseUpdate:W,lastBaseUpdate:ee,shared:M.shared,callbacks:M.callbacks},h.updateQueue=_;return}h=_.lastBaseUpdate,h===null?_.firstBaseUpdate=w:h.next=w,_.lastBaseUpdate=w}var zj=!1;function Fv(){if(zj){var h=Lb;if(h!==null)throw h}}function Lv(h,w,_,M){zj=!1;var W=h.updateQueue;Tp=!1;var ee=W.firstBaseUpdate,Se=W.lastBaseUpdate,He=W.shared.pending;if(He!==null){W.shared.pending=null;var pt=He,Et=pt.next;pt.next=null,Se===null?ee=Et:Se.next=Et,Se=pt;var qt=h.alternate;qt!==null&&(qt=qt.updateQueue,He=qt.lastBaseUpdate,He!==Se&&(He===null?qt.firstBaseUpdate=Et:He.next=Et,qt.lastBaseUpdate=pt))}if(ee!==null){var Wt=W.baseState;Se=0,qt=Et=pt=null,He=ee;do{var Lt=He.lane&-536870913,Bt=Lt!==He.lane;if(Bt?(kr&Lt)===Lt:(M&Lt)===Lt){Lt!==0&&Lt===Fb&&(zj=!0),qt!==null&&(qt=qt.next={lane:0,tag:He.tag,payload:He.payload,callback:null,next:null});e:{var wa=h,za=He;Lt=w;var an=_;switch(za.tag){case 1:if(wa=za.payload,typeof wa=="function"){Wt=wa.call(an,Wt,Lt);break e}Wt=wa;break e;case 3:wa.flags=wa.flags&-65537|128;case 0:if(wa=za.payload,Lt=typeof wa=="function"?wa.call(an,Wt,Lt):wa,Lt==null)break e;Wt=m({},Wt,Lt);break e;case 2:Tp=!0}}Lt=He.callback,Lt!==null&&(h.flags|=64,Bt&&(h.flags|=8192),Bt=W.callbacks,Bt===null?W.callbacks=[Lt]:Bt.push(Lt))}else Bt={lane:Lt,tag:He.tag,payload:He.payload,callback:He.callback,next:null},qt===null?(Et=qt=Bt,pt=Wt):qt=qt.next=Bt,Se|=Lt;if(He=He.next,He===null){if(He=W.shared.pending,He===null)break;Bt=He,He=Bt.next,Bt.next=null,W.lastBaseUpdate=Bt,W.shared.pending=null}}while(!0);qt===null&&(pt=Wt),W.baseState=pt,W.firstBaseUpdate=Et,W.lastBaseUpdate=qt,ee===null&&(W.shared.lanes=0),Lp|=Se,h.lanes=Se,h.memoizedState=Wt}}function V5(h,w){if(typeof h!="function")throw Error(n(191,h));h.call(w)}function W5(h,w){var _=h.callbacks;if(_!==null)for(h.callbacks=null,h=0;h<_.length;h++)V5(_[h],w)}var Ib=Q(null),Hk=Q(0);function K5(h,w){h=Xu,me(Hk,h),me(Ib,w),Xu=h|w.baseLanes}function Ij(){me(Hk,Xu),me(Ib,Ib.current)}function Oj(){Xu=Hk.current,re(Ib),re(Hk)}var ol=Q(null),Yl=null;function Mp(h){var w=h.alternate;me(pi,pi.current&1),me(ol,h),Yl===null&&(w===null||Ib.current!==null||w.memoizedState!==null)&&(Yl=h)}function Bj(h){me(pi,pi.current),me(ol,h),Yl===null&&(Yl=h)}function Y5(h){h.tag===22?(me(pi,pi.current),me(ol,h),Yl===null&&(Yl=h)):Ep()}function Ep(){me(pi,pi.current),me(ol,ol.current)}function ll(h){re(ol),Yl===h&&(Yl=null),re(pi)}var pi=Q(0);function qk(h){for(var w=h;w!==null;){if(w.tag===13){var _=w.memoizedState;if(_!==null&&(_=_.dehydrated,_===null||VM(_)||WM(_)))return w}else if(w.tag===19&&(w.memoizedProps.revealOrder==="forwards"||w.memoizedProps.revealOrder==="backwards"||w.memoizedProps.revealOrder==="unstable_legacy-backwards"||w.memoizedProps.revealOrder==="together")){if((w.flags&128)!==0)return w}else if(w.child!==null){w.child.return=w,w=w.child;continue}if(w===h)break;for(;w.sibling===null;){if(w.return===null||w.return===h)return null;w=w.return}w.sibling.return=w.return,w=w.sibling}return null}var qu=0,er=null,en=null,ki=null,Gk=!1,Ob=!1,Df=!1,$k=0,Rv=0,Bb=null,Xde=0;function Xn(){throw Error(n(321))}function Uj(h,w){if(w===null)return!1;for(var _=0;_<w.length&&_<h.length;_++)if(!En(h[_],w[_]))return!1;return!0}function Hj(h,w,_,M,W,ee){return qu=ee,er=w,w.memoizedState=null,w.updateQueue=null,w.lanes=0,te.H=h===null||h.memoizedState===null?EU:rM,Df=!1,ee=_(M,W),Df=!1,Ob&&(ee=X5(w,_,M,W)),Q5(h),ee}function Q5(h){te.H=Ov;var w=en!==null&&en.next!==null;if(qu=0,ki=en=er=null,Gk=!1,Rv=0,Bb=null,w)throw Error(n(300));h===null||_i||(h=h.dependencies,h!==null&&Lk(h)&&(_i=!0))}function X5(h,w,_,M){er=h;var W=0;do{if(Ob&&(Bb=null),Rv=0,Ob=!1,25<=W)throw Error(n(301));if(W+=1,ki=en=null,h.updateQueue!=null){var ee=h.updateQueue;ee.lastEffect=null,ee.events=null,ee.stores=null,ee.memoCache!=null&&(ee.memoCache.index=0)}te.H=DU,ee=w(_,M)}while(Ob);return ee}function Zde(){var h=te.H,w=h.useState()[0];return w=typeof w.then=="function"?zv(w):w,h=h.useState()[0],(en!==null?en.memoizedState:null)!==h&&(er.flags|=1024),w}function qj(){var h=$k!==0;return $k=0,h}function Gj(h,w,_){w.updateQueue=h.updateQueue,w.flags&=-2053,h.lanes&=~_}function $j(h){if(Gk){for(h=h.memoizedState;h!==null;){var w=h.queue;w!==null&&(w.pending=null),h=h.next}Gk=!1}qu=0,ki=en=er=null,Ob=!1,Rv=$k=0,Bb=null}function mo(){var h={memoizedState:null,baseState:null,baseQueue:null,queue:null,next:null};return ki===null?er.memoizedState=ki=h:ki=ki.next=h,ki}function hi(){if(en===null){var h=er.alternate;h=h!==null?h.memoizedState:null}else h=en.next;var w=ki===null?er.memoizedState:ki.next;if(w!==null)ki=w,en=h;else{if(h===null)throw er.alternate===null?Error(n(467)):Error(n(310));en=h,h={memoizedState:en.memoizedState,baseState:en.baseState,baseQueue:en.baseQueue,queue:en.queue,next:null},ki===null?er.memoizedState=ki=h:ki=ki.next=h}return ki}function Vk(){return{lastEffect:null,events:null,stores:null,memoCache:null}}function zv(h){var w=Rv;return Rv+=1,Bb===null&&(Bb=[]),h=U5(Bb,h,w),w=er,(ki===null?w.memoizedState:ki.next)===null&&(w=w.alternate,te.H=w===null||w.memoizedState===null?EU:rM),h}function Wk(h){if(h!==null&&typeof h=="object"){if(typeof h.then=="function")return zv(h);if(h.$$typeof===k)return Ss(h)}throw Error(n(438,String(h)))}function Vj(h){var w=null,_=er.updateQueue;if(_!==null&&(w=_.memoCache),w==null){var M=er.alternate;M!==null&&(M=M.updateQueue,M!==null&&(M=M.memoCache,M!=null&&(w={data:M.data.map(function(W){return W.slice()}),index:0})))}if(w==null&&(w={data:[],index:0}),_===null&&(_=Vk(),er.updateQueue=_),_.memoCache=w,_=w.data[w.index],_===void 0)for(_=w.data[w.index]=Array(h),M=0;M<h;M++)_[M]=E;return w.index++,_}function Gu(h,w){return typeof w=="function"?w(h):w}function Kk(h){var w=hi();return Wj(w,en,h)}function Wj(h,w,_){var M=h.queue;if(M===null)throw Error(n(311));M.lastRenderedReducer=_;var W=h.baseQueue,ee=M.pending;if(ee!==null){if(W!==null){var Se=W.next;W.next=ee.next,ee.next=Se}w.baseQueue=W=ee,M.pending=null}if(ee=h.baseState,W===null)h.memoizedState=ee;else{w=W.next;var He=Se=null,pt=null,Et=w,qt=!1;do{var Wt=Et.lane&-536870913;if(Wt!==Et.lane?(kr&Wt)===Wt:(qu&Wt)===Wt){var Lt=Et.revertLane;if(Lt===0)pt!==null&&(pt=pt.next={lane:0,revertLane:0,gesture:null,action:Et.action,hasEagerState:Et.hasEagerState,eagerState:Et.eagerState,next:null}),Wt===Fb&&(qt=!0);else if((qu&Lt)===Lt){Et=Et.next,Lt===Fb&&(qt=!0);continue}else Wt={lane:0,revertLane:Et.revertLane,gesture:null,action:Et.action,hasEagerState:Et.hasEagerState,eagerState:Et.eagerState,next:null},pt===null?(He=pt=Wt,Se=ee):pt=pt.next=Wt,er.lanes|=Lt,Lp|=Lt;Wt=Et.action,Df&&_(ee,Wt),ee=Et.hasEagerState?Et.eagerState:_(ee,Wt)}else Lt={lane:Wt,revertLane:Et.revertLane,gesture:Et.gesture,action:Et.action,hasEagerState:Et.hasEagerState,eagerState:Et.eagerState,next:null},pt===null?(He=pt=Lt,Se=ee):pt=pt.next=Lt,er.lanes|=Wt,Lp|=Wt;Et=Et.next}while(Et!==null&&Et!==w);if(pt===null?Se=ee:pt.next=He,!En(ee,h.memoizedState)&&(_i=!0,qt&&(_=Lb,_!==null)))throw _;h.memoizedState=ee,h.baseState=Se,h.baseQueue=pt,M.lastRenderedState=ee}return W===null&&(M.lanes=0),[h.memoizedState,M.dispatch]}function Kj(h){var w=hi(),_=w.queue;if(_===null)throw Error(n(311));_.lastRenderedReducer=h;var M=_.dispatch,W=_.pending,ee=w.memoizedState;if(W!==null){_.pending=null;var Se=W=W.next;do ee=h(ee,Se.action),Se=Se.next;while(Se!==W);En(ee,w.memoizedState)||(_i=!0),w.memoizedState=ee,w.baseQueue===null&&(w.baseState=ee),_.lastRenderedState=ee}return[ee,M]}function Z5(h,w,_){var M=er,W=hi(),ee=Cr;if(ee){if(_===void 0)throw Error(n(407));_=_()}else _=w();var Se=!En((en||W).memoizedState,_);if(Se&&(W.memoizedState=_,_i=!0),W=W.queue,Xj(tU.bind(null,M,W,h),[h]),W.getSnapshot!==w||Se||ki!==null&&ki.memoizedState.tag&1){if(M.flags|=2048,Ub(9,{destroy:void 0},eU.bind(null,M,W,_,w),null),hn===null)throw Error(n(349));ee||(qu&127)!==0||J5(M,w,_)}return _}function J5(h,w,_){h.flags|=16384,h={getSnapshot:w,value:_},w=er.updateQueue,w===null?(w=Vk(),er.updateQueue=w,w.stores=[h]):(_=w.stores,_===null?w.stores=[h]:_.push(h))}function eU(h,w,_,M){w.value=_,w.getSnapshot=M,aU(w)&&rU(h)}function tU(h,w,_){return _(function(){aU(w)&&rU(h)})}function aU(h){var w=h.getSnapshot;h=h.value;try{var _=w();return!En(h,_)}catch{return!0}}function rU(h){var w=_f(h,2);w!==null&&Io(w,h,2)}function Yj(h){var w=mo();if(typeof h=="function"){var _=h;if(h=_(),Df){Re(!0);try{_()}finally{Re(!1)}}}return w.memoizedState=w.baseState=h,w.queue={pending:null,lanes:0,dispatch:null,lastRenderedReducer:Gu,lastRenderedState:h},w}function nU(h,w,_,M){return h.baseState=_,Wj(h,en,typeof M=="function"?M:Gu)}function Jde(h,w,_,M,W){if(Xk(h))throw Error(n(485));if(h=w.action,h!==null){var ee={payload:W,action:h,next:null,isTransition:!0,status:"pending",value:null,reason:null,listeners:[],then:function(Se){ee.listeners.push(Se)}};te.T!==null?_(!0):ee.isTransition=!1,M(ee),_=w.pending,_===null?(ee.next=w.pending=ee,iU(w,ee)):(ee.next=_.next,w.pending=_.next=ee)}}function iU(h,w){var _=w.action,M=w.payload,W=h.state;if(w.isTransition){var ee=te.T,Se={};te.T=Se;try{var He=_(W,M),pt=te.S;pt!==null&&pt(Se,He),sU(h,w,He)}catch(Et){Qj(h,w,Et)}finally{ee!==null&&Se.types!==null&&(ee.types=Se.types),te.T=ee}}else try{ee=_(W,M),sU(h,w,ee)}catch(Et){Qj(h,w,Et)}}function sU(h,w,_){_!==null&&typeof _=="object"&&typeof _.then=="function"?_.then(function(M){oU(h,w,M)},function(M){return Qj(h,w,M)}):oU(h,w,_)}function oU(h,w,_){w.status="fulfilled",w.value=_,lU(w),h.state=_,w=h.pending,w!==null&&(_=w.next,_===w?h.pending=null:(_=_.next,w.next=_,iU(h,_)))}function Qj(h,w,_){var M=h.pending;if(h.pending=null,M!==null){M=M.next;do w.status="rejected",w.reason=_,lU(w),w=w.next;while(w!==M)}h.action=null}function lU(h){h=h.listeners;for(var w=0;w<h.length;w++)(0,h[w])()}function cU(h,w){return w}function dU(h,w){if(Cr){var _=hn.formState;if(_!==null){e:{var M=er;if(Cr){if(Pn){t:{for(var W=Pn,ee=Kl;W.nodeType!==8;){if(!ee){W=null;break t}if(W=Ql(W.nextSibling),W===null){W=null;break t}}ee=W.data,W=ee==="F!"||ee==="F"?W:null}if(W){Pn=Ql(W.nextSibling),M=W.data==="F!";break e}}Cp(M)}M=!1}M&&(w=_[0])}}return _=mo(),_.memoizedState=_.baseState=w,M={pending:null,lanes:0,dispatch:null,lastRenderedReducer:cU,lastRenderedState:w},_.queue=M,_=AU.bind(null,er,M),M.dispatch=_,M=Yj(!1),ee=aM.bind(null,er,!1,M.queue),M=mo(),W={state:w,dispatch:null,action:h,pending:null},M.queue=W,_=Jde.bind(null,er,W,ee,_),W.dispatch=_,M.memoizedState=h,[w,_,!1]}function uU(h){var w=hi();return mU(w,en,h)}function mU(h,w,_){if(w=Wj(h,w,cU)[0],h=Kk(Gu)[0],typeof w=="object"&&w!==null&&typeof w.then=="function")try{var M=zv(w)}catch(Se){throw Se===Rb?Ik:Se}else M=w;w=hi();var W=w.queue,ee=W.dispatch;return _!==w.memoizedState&&(er.flags|=2048,Ub(9,{destroy:void 0},eue.bind(null,W,_),null)),[M,ee,h]}function eue(h,w){h.action=w}function pU(h){var w=hi(),_=en;if(_!==null)return mU(w,_,h);hi(),w=w.memoizedState,_=hi();var M=_.queue.dispatch;return _.memoizedState=h,[w,M,!1]}function Ub(h,w,_,M){return h={tag:h,create:_,deps:M,inst:w,next:null},w=er.updateQueue,w===null&&(w=Vk(),er.updateQueue=w),_=w.lastEffect,_===null?w.lastEffect=h.next=h:(M=_.next,_.next=h,h.next=M,w.lastEffect=h),h}function hU(){return hi().memoizedState}function Yk(h,w,_,M){var W=mo();er.flags|=h,W.memoizedState=Ub(1|w,{destroy:void 0},_,M===void 0?null:M)}function Qk(h,w,_,M){var W=hi();M=M===void 0?null:M;var ee=W.memoizedState.inst;en!==null&&M!==null&&Uj(M,en.memoizedState.deps)?W.memoizedState=Ub(w,ee,_,M):(er.flags|=h,W.memoizedState=Ub(1|w,ee,_,M))}function fU(h,w){Yk(8390656,8,h,w)}function Xj(h,w){Qk(2048,8,h,w)}function tue(h){er.flags|=4;var w=er.updateQueue;if(w===null)w=Vk(),er.updateQueue=w,w.events=[h];else{var _=w.events;_===null?w.events=[h]:_.push(h)}}function gU(h){var w=hi().memoizedState;return tue({ref:w,nextImpl:h}),function(){if((Br&2)!==0)throw Error(n(440));return w.impl.apply(void 0,arguments)}}function bU(h,w){return Qk(4,2,h,w)}function xU(h,w){return Qk(4,4,h,w)}function yU(h,w){if(typeof w=="function"){h=h();var _=w(h);return function(){typeof _=="function"?_():w(null)}}if(w!=null)return h=h(),w.current=h,function(){w.current=null}}function vU(h,w,_){_=_!=null?_.concat([h]):null,Qk(4,4,yU.bind(null,w,h),_)}function Zj(){}function wU(h,w){var _=hi();w=w===void 0?null:w;var M=_.memoizedState;return w!==null&&Uj(w,M[1])?M[0]:(_.memoizedState=[h,w],h)}function SU(h,w){var _=hi();w=w===void 0?null:w;var M=_.memoizedState;if(w!==null&&Uj(w,M[1]))return M[0];if(M=h(),Df){Re(!0);try{h()}finally{Re(!1)}}return _.memoizedState=[M,w],M}function Jj(h,w,_){return _===void 0||(qu&1073741824)!==0&&(kr&261930)===0?h.memoizedState=w:(h.memoizedState=_,h=kH(),er.lanes|=h,Lp|=h,_)}function kU(h,w,_,M){return En(_,w)?_:Ib.current!==null?(h=Jj(h,_,M),En(h,w)||(_i=!0),h):(qu&42)===0||(qu&1073741824)!==0&&(kr&261930)===0?(_i=!0,h.memoizedState=_):(h=kH(),er.lanes|=h,Lp|=h,w)}function _U(h,w,_,M,W){var ee=J.p;J.p=ee!==0&&8>ee?ee:8;var Se=te.T,He={};te.T=He,aM(h,!1,w,_);try{var pt=W(),Et=te.S;if(Et!==null&&Et(He,pt),pt!==null&&typeof pt=="object"&&typeof pt.then=="function"){var qt=Qde(pt,M);Iv(h,w,qt,ul(h))}else Iv(h,w,M,ul(h))}catch(Wt){Iv(h,w,{then:function(){},status:"rejected",reason:Wt},ul())}finally{J.p=ee,Se!==null&&He.types!==null&&(Se.types=He.types),te.T=Se}}function aue(){}function eM(h,w,_,M){if(h.tag!==5)throw Error(n(476));var W=PU(h).queue;_U(h,W,w,de,_===null?aue:function(){return CU(h),_(M)})}function PU(h){var w=h.memoizedState;if(w!==null)return w;w={memoizedState:de,baseState:de,baseQueue:null,queue:{pending:null,lanes:0,dispatch:null,lastRenderedReducer:Gu,lastRenderedState:de},next:null};var _={};return w.next={memoizedState:_,baseState:_,baseQueue:null,queue:{pending:null,lanes:0,dispatch:null,lastRenderedReducer:Gu,lastRenderedState:_},next:null},h.memoizedState=w,h=h.alternate,h!==null&&(h.memoizedState=w),w}function CU(h){var w=PU(h);w.next===null&&(w=h.alternate.memoizedState),Iv(h,w.next.queue,{},ul())}function tM(){return Ss(t0)}function NU(){return hi().memoizedState}function TU(){return hi().memoizedState}function rue(h){for(var w=h.return;w!==null;){switch(w.tag){case 24:case 3:var _=ul();h=Ap(_);var M=jp(w,h,_);M!==null&&(Io(M,w,_),Dv(M,w,_)),w={cache:jj()},h.payload=w;return}w=w.return}}function nue(h,w,_){var M=ul();_={lane:M,revertLane:0,gesture:null,action:_,hasEagerState:!1,eagerState:null,next:null},Xk(h)?jU(w,_):(_=yj(h,w,_,M),_!==null&&(Io(_,h,M),MU(_,w,M)))}function AU(h,w,_){var M=ul();Iv(h,w,_,M)}function Iv(h,w,_,M){var W={lane:M,revertLane:0,gesture:null,action:_,hasEagerState:!1,eagerState:null,next:null};if(Xk(h))jU(w,W);else{var ee=h.alternate;if(h.lanes===0&&(ee===null||ee.lanes===0)&&(ee=w.lastRenderedReducer,ee!==null))try{var Se=w.lastRenderedState,He=ee(Se,_);if(W.hasEagerState=!0,W.eagerState=He,En(He,Se))return Mk(h,w,W,0),hn===null&&jk(),!1}catch{}if(_=yj(h,w,W,M),_!==null)return Io(_,h,M),MU(_,w,M),!0}return!1}function aM(h,w,_,M){if(M={lane:2,revertLane:FM(),gesture:null,action:M,hasEagerState:!1,eagerState:null,next:null},Xk(h)){if(w)throw Error(n(479))}else w=yj(h,_,M,2),w!==null&&Io(w,h,2)}function Xk(h){var w=h.alternate;return h===er||w!==null&&w===er}function jU(h,w){Ob=Gk=!0;var _=h.pending;_===null?w.next=w:(w.next=_.next,_.next=w),h.pending=w}function MU(h,w,_){if((_&4194048)!==0){var M=w.lanes;M&=h.pendingLanes,_|=M,w.lanes=_,Ut(h,_)}}var Ov={readContext:Ss,use:Wk,useCallback:Xn,useContext:Xn,useEffect:Xn,useImperativeHandle:Xn,useLayoutEffect:Xn,useInsertionEffect:Xn,useMemo:Xn,useReducer:Xn,useRef:Xn,useState:Xn,useDebugValue:Xn,useDeferredValue:Xn,useTransition:Xn,useSyncExternalStore:Xn,useId:Xn,useHostTransitionStatus:Xn,useFormState:Xn,useActionState:Xn,useOptimistic:Xn,useMemoCache:Xn,useCacheRefresh:Xn};Ov.useEffectEvent=Xn;var EU={readContext:Ss,use:Wk,useCallback:function(h,w){return mo().memoizedState=[h,w===void 0?null:w],h},useContext:Ss,useEffect:fU,useImperativeHandle:function(h,w,_){_=_!=null?_.concat([h]):null,Yk(4194308,4,yU.bind(null,w,h),_)},useLayoutEffect:function(h,w){return Yk(4194308,4,h,w)},useInsertionEffect:function(h,w){Yk(4,2,h,w)},useMemo:function(h,w){var _=mo();w=w===void 0?null:w;var M=h();if(Df){Re(!0);try{h()}finally{Re(!1)}}return _.memoizedState=[M,w],M},useReducer:function(h,w,_){var M=mo();if(_!==void 0){var W=_(w);if(Df){Re(!0);try{_(w)}finally{Re(!1)}}}else W=w;return M.memoizedState=M.baseState=W,h={pending:null,lanes:0,dispatch:null,lastRenderedReducer:h,lastRenderedState:W},M.queue=h,h=h.dispatch=nue.bind(null,er,h),[M.memoizedState,h]},useRef:function(h){var w=mo();return h={current:h},w.memoizedState=h},useState:function(h){h=Yj(h);var w=h.queue,_=AU.bind(null,er,w);return w.dispatch=_,[h.memoizedState,_]},useDebugValue:Zj,useDeferredValue:function(h,w){var _=mo();return Jj(_,h,w)},useTransition:function(){var h=Yj(!1);return h=_U.bind(null,er,h.queue,!0,!1),mo().memoizedState=h,[!1,h]},useSyncExternalStore:function(h,w,_){var M=er,W=mo();if(Cr){if(_===void 0)throw Error(n(407));_=_()}else{if(_=w(),hn===null)throw Error(n(349));(kr&127)!==0||J5(M,w,_)}W.memoizedState=_;var ee={value:_,getSnapshot:w};return W.queue=ee,fU(tU.bind(null,M,ee,h),[h]),M.flags|=2048,Ub(9,{destroy:void 0},eU.bind(null,M,ee,_,w),null),_},useId:function(){var h=mo(),w=hn.identifierPrefix;if(Cr){var _=Fd,M=Dd;_=(M&~(1<<32-qe(M)-1)).toString(32)+_,w="_"+w+"R_"+_,_=$k++,0<_&&(w+="H"+_.toString(32)),w+="_"}else _=Xde++,w="_"+w+"r_"+_.toString(32)+"_";return h.memoizedState=w},useHostTransitionStatus:tM,useFormState:dU,useActionState:dU,useOptimistic:function(h){var w=mo();w.memoizedState=w.baseState=h;var _={pending:null,lanes:0,dispatch:null,lastRenderedReducer:null,lastRenderedState:null};return w.queue=_,w=aM.bind(null,er,!0,_),_.dispatch=w,[h,w]},useMemoCache:Vj,useCacheRefresh:function(){return mo().memoizedState=rue.bind(null,er)},useEffectEvent:function(h){var w=mo(),_={impl:h};return w.memoizedState=_,function(){if((Br&2)!==0)throw Error(n(440));return _.impl.apply(void 0,arguments)}}},rM={readContext:Ss,use:Wk,useCallback:wU,useContext:Ss,useEffect:Xj,useImperativeHandle:vU,useInsertionEffect:bU,useLayoutEffect:xU,useMemo:SU,useReducer:Kk,useRef:hU,useState:function(){return Kk(Gu)},useDebugValue:Zj,useDeferredValue:function(h,w){var _=hi();return kU(_,en.memoizedState,h,w)},useTransition:function(){var h=Kk(Gu)[0],w=hi().memoizedState;return[typeof h=="boolean"?h:zv(h),w]},useSyncExternalStore:Z5,useId:NU,useHostTransitionStatus:tM,useFormState:uU,useActionState:uU,useOptimistic:function(h,w){var _=hi();return nU(_,en,h,w)},useMemoCache:Vj,useCacheRefresh:TU};rM.useEffectEvent=gU;var DU={readContext:Ss,use:Wk,useCallback:wU,useContext:Ss,useEffect:Xj,useImperativeHandle:vU,useInsertionEffect:bU,useLayoutEffect:xU,useMemo:SU,useReducer:Kj,useRef:hU,useState:function(){return Kj(Gu)},useDebugValue:Zj,useDeferredValue:function(h,w){var _=hi();return en===null?Jj(_,h,w):kU(_,en.memoizedState,h,w)},useTransition:function(){var h=Kj(Gu)[0],w=hi().memoizedState;return[typeof h=="boolean"?h:zv(h),w]},useSyncExternalStore:Z5,useId:NU,useHostTransitionStatus:tM,useFormState:pU,useActionState:pU,useOptimistic:function(h,w){var _=hi();return en!==null?nU(_,en,h,w):(_.baseState=h,[h,_.queue.dispatch])},useMemoCache:Vj,useCacheRefresh:TU};DU.useEffectEvent=gU;function nM(h,w,_,M){w=h.memoizedState,_=_(M,w),_=_==null?w:m({},w,_),h.memoizedState=_,h.lanes===0&&(h.updateQueue.baseState=_)}var iM={enqueueSetState:function(h,w,_){h=h._reactInternals;var M=ul(),W=Ap(M);W.payload=w,_!=null&&(W.callback=_),w=jp(h,W,M),w!==null&&(Io(w,h,M),Dv(w,h,M))},enqueueReplaceState:function(h,w,_){h=h._reactInternals;var M=ul(),W=Ap(M);W.tag=1,W.payload=w,_!=null&&(W.callback=_),w=jp(h,W,M),w!==null&&(Io(w,h,M),Dv(w,h,M))},enqueueForceUpdate:function(h,w){h=h._reactInternals;var _=ul(),M=Ap(_);M.tag=2,w!=null&&(M.callback=w),w=jp(h,M,_),w!==null&&(Io(w,h,_),Dv(w,h,_))}};function FU(h,w,_,M,W,ee,Se){return h=h.stateNode,typeof h.shouldComponentUpdate=="function"?h.shouldComponentUpdate(M,ee,Se):w.prototype&&w.prototype.isPureReactComponent?!vs(_,M)||!vs(W,ee):!0}function LU(h,w,_,M){h=w.state,typeof w.componentWillReceiveProps=="function"&&w.componentWillReceiveProps(_,M),typeof w.UNSAFE_componentWillReceiveProps=="function"&&w.UNSAFE_componentWillReceiveProps(_,M),w.state!==h&&iM.enqueueReplaceState(w,w.state,null)}function Ff(h,w){var _=w;if("ref"in w){_={};for(var M in w)M!=="ref"&&(_[M]=w[M])}if(h=h.defaultProps){_===w&&(_=m({},_));for(var W in h)_[W]===void 0&&(_[W]=h[W])}return _}function RU(h){Ak(h)}function zU(h){console.error(h)}function IU(h){Ak(h)}function Zk(h,w){try{var _=h.onUncaughtError;_(w.value,{componentStack:w.stack})}catch(M){setTimeout(function(){throw M})}}function OU(h,w,_){try{var M=h.onCaughtError;M(_.value,{componentStack:_.stack,errorBoundary:w.tag===1?w.stateNode:null})}catch(W){setTimeout(function(){throw W})}}function sM(h,w,_){return _=Ap(_),_.tag=3,_.payload={element:null},_.callback=function(){Zk(h,w)},_}function BU(h){return h=Ap(h),h.tag=3,h}function UU(h,w,_,M){var W=_.type.getDerivedStateFromError;if(typeof W=="function"){var ee=M.value;h.payload=function(){return W(ee)},h.callback=function(){OU(w,_,M)}}var Se=_.stateNode;Se!==null&&typeof Se.componentDidCatch=="function"&&(h.callback=function(){OU(w,_,M),typeof W!="function"&&(Rp===null?Rp=new Set([this]):Rp.add(this));var He=M.stack;this.componentDidCatch(M.value,{componentStack:He!==null?He:""})})}function iue(h,w,_,M,W){if(_.flags|=32768,M!==null&&typeof M=="object"&&typeof M.then=="function"){if(w=_.alternate,w!==null&&Db(w,_,W,!0),_=ol.current,_!==null){switch(_.tag){case 31:case 13:return Yl===null?d_():_.alternate===null&&Zn===0&&(Zn=3),_.flags&=-257,_.flags|=65536,_.lanes=W,M===Ok?_.flags|=16384:(w=_.updateQueue,w===null?_.updateQueue=new Set([M]):w.add(M),MM(h,M,W)),!1;case 22:return _.flags|=65536,M===Ok?_.flags|=16384:(w=_.updateQueue,w===null?(w={transitions:null,markerInstances:null,retryQueue:new Set([M])},_.updateQueue=w):(_=w.retryQueue,_===null?w.retryQueue=new Set([M]):_.add(M)),MM(h,M,W)),!1}throw Error(n(435,_.tag))}return MM(h,M,W),d_(),!1}if(Cr)return w=ol.current,w!==null?((w.flags&65536)===0&&(w.flags|=256),w.flags|=65536,w.lanes=W,M!==Pj&&(h=Error(n(422),{cause:M}),Tv($l(h,_)))):(M!==Pj&&(w=Error(n(423),{cause:M}),Tv($l(w,_))),h=h.current.alternate,h.flags|=65536,W&=-W,h.lanes|=W,M=$l(M,_),W=sM(h.stateNode,M,W),Rj(h,W),Zn!==4&&(Zn=2)),!1;var ee=Error(n(520),{cause:M});if(ee=$l(ee,_),Wv===null?Wv=[ee]:Wv.push(ee),Zn!==4&&(Zn=2),w===null)return!0;M=$l(M,_),_=w;do{switch(_.tag){case 3:return _.flags|=65536,h=W&-W,_.lanes|=h,h=sM(_.stateNode,M,h),Rj(_,h),!1;case 1:if(w=_.type,ee=_.stateNode,(_.flags&128)===0&&(typeof w.getDerivedStateFromError=="function"||ee!==null&&typeof ee.componentDidCatch=="function"&&(Rp===null||!Rp.has(ee))))return _.flags|=65536,W&=-W,_.lanes|=W,W=BU(W),UU(W,h,_,M),Rj(_,W),!1}_=_.return}while(_!==null);return!1}var oM=Error(n(461)),_i=!1;function ks(h,w,_,M){w.child=h===null?$5(w,null,_,M):Ef(w,h.child,_,M)}function HU(h,w,_,M,W){_=_.render;var ee=w.ref;if("ref"in M){var Se={};for(var He in M)He!=="ref"&&(Se[He]=M[He])}else Se=M;return Tf(w),M=Hj(h,w,_,Se,ee,W),He=qj(),h!==null&&!_i?(Gj(h,w,W),$u(h,w,W)):(Cr&&He&&kj(w),w.flags|=1,ks(h,w,M,W),w.child)}function qU(h,w,_,M,W){if(h===null){var ee=_.type;return typeof ee=="function"&&!vj(ee)&&ee.defaultProps===void 0&&_.compare===null?(w.tag=15,w.type=ee,GU(h,w,ee,M,W)):(h=Dk(_.type,null,M,w,w.mode,W),h.ref=w.ref,h.return=w,w.child=h)}if(ee=h.child,!fM(h,W)){var Se=ee.memoizedProps;if(_=_.compare,_=_!==null?_:vs,_(Se,M)&&h.ref===w.ref)return $u(h,w,W)}return w.flags|=1,h=Ou(ee,M),h.ref=w.ref,h.return=w,w.child=h}function GU(h,w,_,M,W){if(h!==null){var ee=h.memoizedProps;if(vs(ee,M)&&h.ref===w.ref)if(_i=!1,w.pendingProps=M=ee,fM(h,W))(h.flags&131072)!==0&&(_i=!0);else return w.lanes=h.lanes,$u(h,w,W)}return lM(h,w,_,M,W)}function $U(h,w,_,M){var W=M.children,ee=h!==null?h.memoizedState:null;if(h===null&&w.stateNode===null&&(w.stateNode={_visibility:1,_pendingMarkers:null,_retryCache:null,_transitions:null}),M.mode==="hidden"){if((w.flags&128)!==0){if(ee=ee!==null?ee.baseLanes|_:_,h!==null){for(M=w.child=h.child,W=0;M!==null;)W=W|M.lanes|M.childLanes,M=M.sibling;M=W&~ee}else M=0,w.child=null;return VU(h,w,ee,_,M)}if((_&536870912)!==0)w.memoizedState={baseLanes:0,cachePool:null},h!==null&&zk(w,ee!==null?ee.cachePool:null),ee!==null?K5(w,ee):Ij(),Y5(w);else return M=w.lanes=536870912,VU(h,w,ee!==null?ee.baseLanes|_:_,_,M)}else ee!==null?(zk(w,ee.cachePool),K5(w,ee),Ep(),w.memoizedState=null):(h!==null&&zk(w,null),Ij(),Ep());return ks(h,w,W,_),w.child}function Bv(h,w){return h!==null&&h.tag===22||w.stateNode!==null||(w.stateNode={_visibility:1,_pendingMarkers:null,_retryCache:null,_transitions:null}),w.sibling}function VU(h,w,_,M,W){var ee=Ej();return ee=ee===null?null:{parent:Si._currentValue,pool:ee},w.memoizedState={baseLanes:_,cachePool:ee},h!==null&&zk(w,null),Ij(),Y5(w),h!==null&&Db(h,w,M,!0),w.childLanes=W,null}function Jk(h,w){return w=t_({mode:w.mode,children:w.children},h.mode),w.ref=h.ref,h.child=w,w.return=h,w}function WU(h,w,_){return Ef(w,h.child,null,_),h=Jk(w,w.pendingProps),h.flags|=2,ll(w),w.memoizedState=null,h}function sue(h,w,_){var M=w.pendingProps,W=(w.flags&128)!==0;if(w.flags&=-129,h===null){if(Cr){if(M.mode==="hidden")return h=Jk(w,M),w.lanes=536870912,Bv(null,h);if(Bj(w),(h=Pn)?(h=iq(h,Kl),h=h!==null&&h.data==="&"?h:null,h!==null&&(w.memoizedState={dehydrated:h,treeContext:_p!==null?{id:Dd,overflow:Fd}:null,retryLane:536870912,hydrationErrors:null},_=j5(h),_.return=w,w.child=_,ws=w,Pn=null)):h=null,h===null)throw Cp(w);return w.lanes=536870912,null}return Jk(w,M)}var ee=h.memoizedState;if(ee!==null){var Se=ee.dehydrated;if(Bj(w),W)if(w.flags&256)w.flags&=-257,w=WU(h,w,_);else if(w.memoizedState!==null)w.child=h.child,w.flags|=128,w=null;else throw Error(n(558));else if(_i||Db(h,w,_,!1),W=(_&h.childLanes)!==0,_i||W){if(M=hn,M!==null&&(Se=gt(M,_),Se!==0&&Se!==ee.retryLane))throw ee.retryLane=Se,_f(h,Se),Io(M,h,Se),oM;d_(),w=WU(h,w,_)}else h=ee.treeContext,Pn=Ql(Se.nextSibling),ws=w,Cr=!0,Pp=null,Kl=!1,h!==null&&D5(w,h),w=Jk(w,M),w.flags|=4096;return w}return h=Ou(h.child,{mode:M.mode,children:M.children}),h.ref=w.ref,w.child=h,h.return=w,h}function e_(h,w){var _=w.ref;if(_===null)h!==null&&h.ref!==null&&(w.flags|=4194816);else{if(typeof _!="function"&&typeof _!="object")throw Error(n(284));(h===null||h.ref!==_)&&(w.flags|=4194816)}}function lM(h,w,_,M,W){return Tf(w),_=Hj(h,w,_,M,void 0,W),M=qj(),h!==null&&!_i?(Gj(h,w,W),$u(h,w,W)):(Cr&&M&&kj(w),w.flags|=1,ks(h,w,_,W),w.child)}function KU(h,w,_,M,W,ee){return Tf(w),w.updateQueue=null,_=X5(w,M,_,W),Q5(h),M=qj(),h!==null&&!_i?(Gj(h,w,ee),$u(h,w,ee)):(Cr&&M&&kj(w),w.flags|=1,ks(h,w,_,ee),w.child)}function YU(h,w,_,M,W){if(Tf(w),w.stateNode===null){var ee=Ab,Se=_.contextType;typeof Se=="object"&&Se!==null&&(ee=Ss(Se)),ee=new _(M,ee),w.memoizedState=ee.state!==null&&ee.state!==void 0?ee.state:null,ee.updater=iM,w.stateNode=ee,ee._reactInternals=w,ee=w.stateNode,ee.props=M,ee.state=w.memoizedState,ee.refs={},Fj(w),Se=_.contextType,ee.context=typeof Se=="object"&&Se!==null?Ss(Se):Ab,ee.state=w.memoizedState,Se=_.getDerivedStateFromProps,typeof Se=="function"&&(nM(w,_,Se,M),ee.state=w.memoizedState),typeof _.getDerivedStateFromProps=="function"||typeof ee.getSnapshotBeforeUpdate=="function"||typeof ee.UNSAFE_componentWillMount!="function"&&typeof ee.componentWillMount!="function"||(Se=ee.state,typeof ee.componentWillMount=="function"&&ee.componentWillMount(),typeof ee.UNSAFE_componentWillMount=="function"&&ee.UNSAFE_componentWillMount(),Se!==ee.state&&iM.enqueueReplaceState(ee,ee.state,null),Lv(w,M,ee,W),Fv(),ee.state=w.memoizedState),typeof ee.componentDidMount=="function"&&(w.flags|=4194308),M=!0}else if(h===null){ee=w.stateNode;var He=w.memoizedProps,pt=Ff(_,He);ee.props=pt;var Et=ee.context,qt=_.contextType;Se=Ab,typeof qt=="object"&&qt!==null&&(Se=Ss(qt));var Wt=_.getDerivedStateFromProps;qt=typeof Wt=="function"||typeof ee.getSnapshotBeforeUpdate=="function",He=w.pendingProps!==He,qt||typeof ee.UNSAFE_componentWillReceiveProps!="function"&&typeof ee.componentWillReceiveProps!="function"||(He||Et!==Se)&&LU(w,ee,M,Se),Tp=!1;var Lt=w.memoizedState;ee.state=Lt,Lv(w,M,ee,W),Fv(),Et=w.memoizedState,He||Lt!==Et||Tp?(typeof Wt=="function"&&(nM(w,_,Wt,M),Et=w.memoizedState),(pt=Tp||FU(w,_,pt,M,Lt,Et,Se))?(qt||typeof ee.UNSAFE_componentWillMount!="function"&&typeof ee.componentWillMount!="function"||(typeof ee.componentWillMount=="function"&&ee.componentWillMount(),typeof ee.UNSAFE_componentWillMount=="function"&&ee.UNSAFE_componentWillMount()),typeof ee.componentDidMount=="function"&&(w.flags|=4194308)):(typeof ee.componentDidMount=="function"&&(w.flags|=4194308),w.memoizedProps=M,w.memoizedState=Et),ee.props=M,ee.state=Et,ee.context=Se,M=pt):(typeof ee.componentDidMount=="function"&&(w.flags|=4194308),M=!1)}else{ee=w.stateNode,Lj(h,w),Se=w.memoizedProps,qt=Ff(_,Se),ee.props=qt,Wt=w.pendingProps,Lt=ee.context,Et=_.contextType,pt=Ab,typeof Et=="object"&&Et!==null&&(pt=Ss(Et)),He=_.getDerivedStateFromProps,(Et=typeof He=="function"||typeof ee.getSnapshotBeforeUpdate=="function")||typeof ee.UNSAFE_componentWillReceiveProps!="function"&&typeof ee.componentWillReceiveProps!="function"||(Se!==Wt||Lt!==pt)&&LU(w,ee,M,pt),Tp=!1,Lt=w.memoizedState,ee.state=Lt,Lv(w,M,ee,W),Fv();var Bt=w.memoizedState;Se!==Wt||Lt!==Bt||Tp||h!==null&&h.dependencies!==null&&Lk(h.dependencies)?(typeof He=="function"&&(nM(w,_,He,M),Bt=w.memoizedState),(qt=Tp||FU(w,_,qt,M,Lt,Bt,pt)||h!==null&&h.dependencies!==null&&Lk(h.dependencies))?(Et||typeof ee.UNSAFE_componentWillUpdate!="function"&&typeof ee.componentWillUpdate!="function"||(typeof ee.componentWillUpdate=="function"&&ee.componentWillUpdate(M,Bt,pt),typeof ee.UNSAFE_componentWillUpdate=="function"&&ee.UNSAFE_componentWillUpdate(M,Bt,pt)),typeof ee.componentDidUpdate=="function"&&(w.flags|=4),typeof ee.getSnapshotBeforeUpdate=="function"&&(w.flags|=1024)):(typeof ee.componentDidUpdate!="function"||Se===h.memoizedProps&&Lt===h.memoizedState||(w.flags|=4),typeof ee.getSnapshotBeforeUpdate!="function"||Se===h.memoizedProps&&Lt===h.memoizedState||(w.flags|=1024),w.memoizedProps=M,w.memoizedState=Bt),ee.props=M,ee.state=Bt,ee.context=pt,M=qt):(typeof ee.componentDidUpdate!="function"||Se===h.memoizedProps&&Lt===h.memoizedState||(w.flags|=4),typeof ee.getSnapshotBeforeUpdate!="function"||Se===h.memoizedProps&&Lt===h.memoizedState||(w.flags|=1024),M=!1)}return ee=M,e_(h,w),M=(w.flags&128)!==0,ee||M?(ee=w.stateNode,_=M&&typeof _.getDerivedStateFromError!="function"?null:ee.render(),w.flags|=1,h!==null&&M?(w.child=Ef(w,h.child,null,W),w.child=Ef(w,null,_,W)):ks(h,w,_,W),w.memoizedState=ee.state,h=w.child):h=$u(h,w,W),h}function QU(h,w,_,M){return Cf(),w.flags|=256,ks(h,w,_,M),w.child}var cM={dehydrated:null,treeContext:null,retryLane:0,hydrationErrors:null};function dM(h){return{baseLanes:h,cachePool:O5()}}function uM(h,w,_){return h=h!==null?h.childLanes&~_:0,w&&(h|=dl),h}function XU(h,w,_){var M=w.pendingProps,W=!1,ee=(w.flags&128)!==0,Se;if((Se=ee)||(Se=h!==null&&h.memoizedState===null?!1:(pi.current&2)!==0),Se&&(W=!0,w.flags&=-129),Se=(w.flags&32)!==0,w.flags&=-33,h===null){if(Cr){if(W?Mp(w):Ep(),(h=Pn)?(h=iq(h,Kl),h=h!==null&&h.data!=="&"?h:null,h!==null&&(w.memoizedState={dehydrated:h,treeContext:_p!==null?{id:Dd,overflow:Fd}:null,retryLane:536870912,hydrationErrors:null},_=j5(h),_.return=w,w.child=_,ws=w,Pn=null)):h=null,h===null)throw Cp(w);return WM(h)?w.lanes=32:w.lanes=536870912,null}var He=M.children;return M=M.fallback,W?(Ep(),W=w.mode,He=t_({mode:"hidden",children:He},W),M=Pf(M,W,_,null),He.return=w,M.return=w,He.sibling=M,w.child=He,M=w.child,M.memoizedState=dM(_),M.childLanes=uM(h,Se,_),w.memoizedState=cM,Bv(null,M)):(Mp(w),mM(w,He))}var pt=h.memoizedState;if(pt!==null&&(He=pt.dehydrated,He!==null)){if(ee)w.flags&256?(Mp(w),w.flags&=-257,w=pM(h,w,_)):w.memoizedState!==null?(Ep(),w.child=h.child,w.flags|=128,w=null):(Ep(),He=M.fallback,W=w.mode,M=t_({mode:"visible",children:M.children},W),He=Pf(He,W,_,null),He.flags|=2,M.return=w,He.return=w,M.sibling=He,w.child=M,Ef(w,h.child,null,_),M=w.child,M.memoizedState=dM(_),M.childLanes=uM(h,Se,_),w.memoizedState=cM,w=Bv(null,M));else if(Mp(w),WM(He)){if(Se=He.nextSibling&&He.nextSibling.dataset,Se)var Et=Se.dgst;Se=Et,M=Error(n(419)),M.stack="",M.digest=Se,Tv({value:M,source:null,stack:null}),w=pM(h,w,_)}else if(_i||Db(h,w,_,!1),Se=(_&h.childLanes)!==0,_i||Se){if(Se=hn,Se!==null&&(M=gt(Se,_),M!==0&&M!==pt.retryLane))throw pt.retryLane=M,_f(h,M),Io(Se,h,M),oM;VM(He)||d_(),w=pM(h,w,_)}else VM(He)?(w.flags|=192,w.child=h.child,w=null):(h=pt.treeContext,Pn=Ql(He.nextSibling),ws=w,Cr=!0,Pp=null,Kl=!1,h!==null&&D5(w,h),w=mM(w,M.children),w.flags|=4096);return w}return W?(Ep(),He=M.fallback,W=w.mode,pt=h.child,Et=pt.sibling,M=Ou(pt,{mode:"hidden",children:M.children}),M.subtreeFlags=pt.subtreeFlags&65011712,Et!==null?He=Ou(Et,He):(He=Pf(He,W,_,null),He.flags|=2),He.return=w,M.return=w,M.sibling=He,w.child=M,Bv(null,M),M=w.child,He=h.child.memoizedState,He===null?He=dM(_):(W=He.cachePool,W!==null?(pt=Si._currentValue,W=W.parent!==pt?{parent:pt,pool:pt}:W):W=O5(),He={baseLanes:He.baseLanes|_,cachePool:W}),M.memoizedState=He,M.childLanes=uM(h,Se,_),w.memoizedState=cM,Bv(h.child,M)):(Mp(w),_=h.child,h=_.sibling,_=Ou(_,{mode:"visible",children:M.children}),_.return=w,_.sibling=null,h!==null&&(Se=w.deletions,Se===null?(w.deletions=[h],w.flags|=16):Se.push(h)),w.child=_,w.memoizedState=null,_)}function mM(h,w){return w=t_({mode:"visible",children:w},h.mode),w.return=h,h.child=w}function t_(h,w){return h=sl(22,h,null,w),h.lanes=0,h}function pM(h,w,_){return Ef(w,h.child,null,_),h=mM(w,w.pendingProps.children),h.flags|=2,w.memoizedState=null,h}function ZU(h,w,_){h.lanes|=w;var M=h.alternate;M!==null&&(M.lanes|=w),Tj(h.return,w,_)}function hM(h,w,_,M,W,ee){var Se=h.memoizedState;Se===null?h.memoizedState={isBackwards:w,rendering:null,renderingStartTime:0,last:M,tail:_,tailMode:W,treeForkCount:ee}:(Se.isBackwards=w,Se.rendering=null,Se.renderingStartTime=0,Se.last=M,Se.tail=_,Se.tailMode=W,Se.treeForkCount=ee)}function JU(h,w,_){var M=w.pendingProps,W=M.revealOrder,ee=M.tail;M=M.children;var Se=pi.current,He=(Se&2)!==0;if(He?(Se=Se&1|2,w.flags|=128):Se&=1,me(pi,Se),ks(h,w,M,_),M=Cr?Nv:0,!He&&h!==null&&(h.flags&128)!==0)e:for(h=w.child;h!==null;){if(h.tag===13)h.memoizedState!==null&&ZU(h,_,w);else if(h.tag===19)ZU(h,_,w);else if(h.child!==null){h.child.return=h,h=h.child;continue}if(h===w)break e;for(;h.sibling===null;){if(h.return===null||h.return===w)break e;h=h.return}h.sibling.return=h.return,h=h.sibling}switch(W){case"forwards":for(_=w.child,W=null;_!==null;)h=_.alternate,h!==null&&qk(h)===null&&(W=_),_=_.sibling;_=W,_===null?(W=w.child,w.child=null):(W=_.sibling,_.sibling=null),hM(w,!1,W,_,ee,M);break;case"backwards":case"unstable_legacy-backwards":for(_=null,W=w.child,w.child=null;W!==null;){if(h=W.alternate,h!==null&&qk(h)===null){w.child=W;break}h=W.sibling,W.sibling=_,_=W,W=h}hM(w,!0,_,null,ee,M);break;case"together":hM(w,!1,null,null,void 0,M);break;default:w.memoizedState=null}return w.child}function $u(h,w,_){if(h!==null&&(w.dependencies=h.dependencies),Lp|=w.lanes,(_&w.childLanes)===0)if(h!==null){if(Db(h,w,_,!1),(_&w.childLanes)===0)return null}else return null;if(h!==null&&w.child!==h.child)throw Error(n(153));if(w.child!==null){for(h=w.child,_=Ou(h,h.pendingProps),w.child=_,_.return=w;h.sibling!==null;)h=h.sibling,_=_.sibling=Ou(h,h.pendingProps),_.return=w;_.sibling=null}return w.child}function fM(h,w){return(h.lanes&w)!==0?!0:(h=h.dependencies,!!(h!==null&&Lk(h)))}function oue(h,w,_){switch(w.tag){case 3:A(w,w.stateNode.containerInfo),Np(w,Si,h.memoizedState.cache),Cf();break;case 27:case 5:U(w);break;case 4:A(w,w.stateNode.containerInfo);break;case 10:Np(w,w.type,w.memoizedProps.value);break;case 31:if(w.memoizedState!==null)return w.flags|=128,Bj(w),null;break;case 13:var M=w.memoizedState;if(M!==null)return M.dehydrated!==null?(Mp(w),w.flags|=128,null):(_&w.child.childLanes)!==0?XU(h,w,_):(Mp(w),h=$u(h,w,_),h!==null?h.sibling:null);Mp(w);break;case 19:var W=(h.flags&128)!==0;if(M=(_&w.childLanes)!==0,M||(Db(h,w,_,!1),M=(_&w.childLanes)!==0),W){if(M)return JU(h,w,_);w.flags|=128}if(W=w.memoizedState,W!==null&&(W.rendering=null,W.tail=null,W.lastEffect=null),me(pi,pi.current),M)break;return null;case 22:return w.lanes=0,$U(h,w,_,w.pendingProps);case 24:Np(w,Si,h.memoizedState.cache)}return $u(h,w,_)}function eH(h,w,_){if(h!==null)if(h.memoizedProps!==w.pendingProps)_i=!0;else{if(!fM(h,_)&&(w.flags&128)===0)return _i=!1,oue(h,w,_);_i=(h.flags&131072)!==0}else _i=!1,Cr&&(w.flags&1048576)!==0&&E5(w,Nv,w.index);switch(w.lanes=0,w.tag){case 16:e:{var M=w.pendingProps;if(h=jf(w.elementType),w.type=h,typeof h=="function")vj(h)?(M=Ff(h,M),w.tag=1,w=YU(null,w,h,M,_)):(w.tag=0,w=lM(null,w,h,M,_));else{if(h!=null){var W=h.$$typeof;if(W===C){w.tag=11,w=HU(null,w,h,M,_);break e}else if(W===j){w.tag=14,w=qU(null,w,h,M,_);break e}}throw w=L(h)||h,Error(n(306,w,""))}}return w;case 0:return lM(h,w,w.type,w.pendingProps,_);case 1:return M=w.type,W=Ff(M,w.pendingProps),YU(h,w,M,W,_);case 3:e:{if(A(w,w.stateNode.containerInfo),h===null)throw Error(n(387));M=w.pendingProps;var ee=w.memoizedState;W=ee.element,Lj(h,w),Lv(w,M,null,_);var Se=w.memoizedState;if(M=Se.cache,Np(w,Si,M),M!==ee.cache&&Aj(w,[Si],_,!0),Fv(),M=Se.element,ee.isDehydrated)if(ee={element:M,isDehydrated:!1,cache:Se.cache},w.updateQueue.baseState=ee,w.memoizedState=ee,w.flags&256){w=QU(h,w,M,_);break e}else if(M!==W){W=$l(Error(n(424)),w),Tv(W),w=QU(h,w,M,_);break e}else for(h=w.stateNode.containerInfo,h.nodeType===9?h=h.body:h=h.nodeName==="HTML"?h.ownerDocument.body:h,Pn=Ql(h.firstChild),ws=w,Cr=!0,Pp=null,Kl=!0,_=$5(w,null,M,_),w.child=_;_;)_.flags=_.flags&-3|4096,_=_.sibling;else{if(Cf(),M===W){w=$u(h,w,_);break e}ks(h,w,M,_)}w=w.child}return w;case 26:return e_(h,w),h===null?(_=uq(w.type,null,w.pendingProps,null))?w.memoizedState=_:Cr||(_=w.type,h=w.pendingProps,M=b_(G.current).createElement(_),M[vt]=w,M[Pt]=h,_s(M,_,h),nt(M),w.stateNode=M):w.memoizedState=uq(w.type,h.memoizedProps,w.pendingProps,h.memoizedState),null;case 27:return U(w),h===null&&Cr&&(M=w.stateNode=lq(w.type,w.pendingProps,G.current),ws=w,Kl=!0,W=Pn,Bp(w.type)?(KM=W,Pn=Ql(M.firstChild)):Pn=W),ks(h,w,w.pendingProps.children,_),e_(h,w),h===null&&(w.flags|=4194304),w.child;case 5:return h===null&&Cr&&((W=M=Pn)&&(M=zue(M,w.type,w.pendingProps,Kl),M!==null?(w.stateNode=M,ws=w,Pn=Ql(M.firstChild),Kl=!1,W=!0):W=!1),W||Cp(w)),U(w),W=w.type,ee=w.pendingProps,Se=h!==null?h.memoizedProps:null,M=ee.children,qM(W,ee)?M=null:Se!==null&&qM(W,Se)&&(w.flags|=32),w.memoizedState!==null&&(W=Hj(h,w,Zde,null,null,_),t0._currentValue=W),e_(h,w),ks(h,w,M,_),w.child;case 6:return h===null&&Cr&&((h=_=Pn)&&(_=Iue(_,w.pendingProps,Kl),_!==null?(w.stateNode=_,ws=w,Pn=null,h=!0):h=!1),h||Cp(w)),null;case 13:return XU(h,w,_);case 4:return A(w,w.stateNode.containerInfo),M=w.pendingProps,h===null?w.child=Ef(w,null,M,_):ks(h,w,M,_),w.child;case 11:return HU(h,w,w.type,w.pendingProps,_);case 7:return ks(h,w,w.pendingProps,_),w.child;case 8:return ks(h,w,w.pendingProps.children,_),w.child;case 12:return ks(h,w,w.pendingProps.children,_),w.child;case 10:return M=w.pendingProps,Np(w,w.type,M.value),ks(h,w,M.children,_),w.child;case 9:return W=w.type._context,M=w.pendingProps.children,Tf(w),W=Ss(W),M=M(W),w.flags|=1,ks(h,w,M,_),w.child;case 14:return qU(h,w,w.type,w.pendingProps,_);case 15:return GU(h,w,w.type,w.pendingProps,_);case 19:return JU(h,w,_);case 31:return sue(h,w,_);case 22:return $U(h,w,_,w.pendingProps);case 24:return Tf(w),M=Ss(Si),h===null?(W=Ej(),W===null&&(W=hn,ee=jj(),W.pooledCache=ee,ee.refCount++,ee!==null&&(W.pooledCacheLanes|=_),W=ee),w.memoizedState={parent:M,cache:W},Fj(w),Np(w,Si,W)):((h.lanes&_)!==0&&(Lj(h,w),Lv(w,null,null,_),Fv()),W=h.memoizedState,ee=w.memoizedState,W.parent!==M?(W={parent:M,cache:M},w.memoizedState=W,w.lanes===0&&(w.memoizedState=w.updateQueue.baseState=W),Np(w,Si,M)):(M=ee.cache,Np(w,Si,M),M!==W.cache&&Aj(w,[Si],_,!0))),ks(h,w,w.pendingProps.children,_),w.child;case 29:throw w.pendingProps}throw Error(n(156,w.tag))}function Vu(h){h.flags|=4}function gM(h,w,_,M,W){if((w=(h.mode&32)!==0)&&(w=!1),w){if(h.flags|=16777216,(W&335544128)===W)if(h.stateNode.complete)h.flags|=8192;else if(NH())h.flags|=8192;else throw Mf=Ok,Dj}else h.flags&=-16777217}function tH(h,w){if(w.type!=="stylesheet"||(w.state.loading&4)!==0)h.flags&=-16777217;else if(h.flags|=16777216,!gq(w))if(NH())h.flags|=8192;else throw Mf=Ok,Dj}function a_(h,w){w!==null&&(h.flags|=4),h.flags&16384&&(w=h.tag!==22?We():536870912,h.lanes|=w,$b|=w)}function Uv(h,w){if(!Cr)switch(h.tailMode){case"hidden":w=h.tail;for(var _=null;w!==null;)w.alternate!==null&&(_=w),w=w.sibling;_===null?h.tail=null:_.sibling=null;break;case"collapsed":_=h.tail;for(var M=null;_!==null;)_.alternate!==null&&(M=_),_=_.sibling;M===null?w||h.tail===null?h.tail=null:h.tail.sibling=null:M.sibling=null}}function Cn(h){var w=h.alternate!==null&&h.alternate.child===h.child,_=0,M=0;if(w)for(var W=h.child;W!==null;)_|=W.lanes|W.childLanes,M|=W.subtreeFlags&65011712,M|=W.flags&65011712,W.return=h,W=W.sibling;else for(W=h.child;W!==null;)_|=W.lanes|W.childLanes,M|=W.subtreeFlags,M|=W.flags,W.return=h,W=W.sibling;return h.subtreeFlags|=M,h.childLanes=_,w}function lue(h,w,_){var M=w.pendingProps;switch(_j(w),w.tag){case 16:case 15:case 0:case 11:case 7:case 8:case 12:case 9:case 14:return Cn(w),null;case 1:return Cn(w),null;case 3:return _=w.stateNode,M=null,h!==null&&(M=h.memoizedState.cache),w.memoizedState.cache!==M&&(w.flags|=2048),Hu(Si),F(),_.pendingContext&&(_.context=_.pendingContext,_.pendingContext=null),(h===null||h.child===null)&&(Eb(w)?Vu(w):h===null||h.memoizedState.isDehydrated&&(w.flags&256)===0||(w.flags|=1024,Cj())),Cn(w),null;case 26:var W=w.type,ee=w.memoizedState;return h===null?(Vu(w),ee!==null?(Cn(w),tH(w,ee)):(Cn(w),gM(w,W,null,M,_))):ee?ee!==h.memoizedState?(Vu(w),Cn(w),tH(w,ee)):(Cn(w),w.flags&=-16777217):(h=h.memoizedProps,h!==M&&Vu(w),Cn(w),gM(w,W,h,M,_)),null;case 27:if(V(w),_=G.current,W=w.type,h!==null&&w.stateNode!=null)h.memoizedProps!==M&&Vu(w);else{if(!M){if(w.stateNode===null)throw Error(n(166));return Cn(w),null}h=pe.current,Eb(w)?F5(w):(h=lq(W,M,_),w.stateNode=h,Vu(w))}return Cn(w),null;case 5:if(V(w),W=w.type,h!==null&&w.stateNode!=null)h.memoizedProps!==M&&Vu(w);else{if(!M){if(w.stateNode===null)throw Error(n(166));return Cn(w),null}if(ee=pe.current,Eb(w))F5(w);else{var Se=b_(G.current);switch(ee){case 1:ee=Se.createElementNS("http://www.w3.org/2000/svg",W);break;case 2:ee=Se.createElementNS("http://www.w3.org/1998/Math/MathML",W);break;default:switch(W){case"svg":ee=Se.createElementNS("http://www.w3.org/2000/svg",W);break;case"math":ee=Se.createElementNS("http://www.w3.org/1998/Math/MathML",W);break;case"script":ee=Se.createElement("div"),ee.innerHTML="<script><\/script>",ee=ee.removeChild(ee.firstChild);break;case"select":ee=typeof M.is=="string"?Se.createElement("select",{is:M.is}):Se.createElement("select"),M.multiple?ee.multiple=!0:M.size&&(ee.size=M.size);break;default:ee=typeof M.is=="string"?Se.createElement(W,{is:M.is}):Se.createElement(W)}}ee[vt]=w,ee[Pt]=M;e:for(Se=w.child;Se!==null;){if(Se.tag===5||Se.tag===6)ee.appendChild(Se.stateNode);else if(Se.tag!==4&&Se.tag!==27&&Se.child!==null){Se.child.return=Se,Se=Se.child;continue}if(Se===w)break e;for(;Se.sibling===null;){if(Se.return===null||Se.return===w)break e;Se=Se.return}Se.sibling.return=Se.return,Se=Se.sibling}w.stateNode=ee;e:switch(_s(ee,W,M),W){case"button":case"input":case"select":case"textarea":M=!!M.autoFocus;break e;case"img":M=!0;break e;default:M=!1}M&&Vu(w)}}return Cn(w),gM(w,w.type,h===null?null:h.memoizedProps,w.pendingProps,_),null;case 6:if(h&&w.stateNode!=null)h.memoizedProps!==M&&Vu(w);else{if(typeof M!="string"&&w.stateNode===null)throw Error(n(166));if(h=G.current,Eb(w)){if(h=w.stateNode,_=w.memoizedProps,M=null,W=ws,W!==null)switch(W.tag){case 27:case 5:M=W.memoizedProps}h[vt]=w,h=!!(h.nodeValue===_||M!==null&&M.suppressHydrationWarning===!0||XH(h.nodeValue,_)),h||Cp(w,!0)}else h=b_(h).createTextNode(M),h[vt]=w,w.stateNode=h}return Cn(w),null;case 31:if(_=w.memoizedState,h===null||h.memoizedState!==null){if(M=Eb(w),_!==null){if(h===null){if(!M)throw Error(n(318));if(h=w.memoizedState,h=h!==null?h.dehydrated:null,!h)throw Error(n(557));h[vt]=w}else Cf(),(w.flags&128)===0&&(w.memoizedState=null),w.flags|=4;Cn(w),h=!1}else _=Cj(),h!==null&&h.memoizedState!==null&&(h.memoizedState.hydrationErrors=_),h=!0;if(!h)return w.flags&256?(ll(w),w):(ll(w),null);if((w.flags&128)!==0)throw Error(n(558))}return Cn(w),null;case 13:if(M=w.memoizedState,h===null||h.memoizedState!==null&&h.memoizedState.dehydrated!==null){if(W=Eb(w),M!==null&&M.dehydrated!==null){if(h===null){if(!W)throw Error(n(318));if(W=w.memoizedState,W=W!==null?W.dehydrated:null,!W)throw Error(n(317));W[vt]=w}else Cf(),(w.flags&128)===0&&(w.memoizedState=null),w.flags|=4;Cn(w),W=!1}else W=Cj(),h!==null&&h.memoizedState!==null&&(h.memoizedState.hydrationErrors=W),W=!0;if(!W)return w.flags&256?(ll(w),w):(ll(w),null)}return ll(w),(w.flags&128)!==0?(w.lanes=_,w):(_=M!==null,h=h!==null&&h.memoizedState!==null,_&&(M=w.child,W=null,M.alternate!==null&&M.alternate.memoizedState!==null&&M.alternate.memoizedState.cachePool!==null&&(W=M.alternate.memoizedState.cachePool.pool),ee=null,M.memoizedState!==null&&M.memoizedState.cachePool!==null&&(ee=M.memoizedState.cachePool.pool),ee!==W&&(M.flags|=2048)),_!==h&&_&&(w.child.flags|=8192),a_(w,w.updateQueue),Cn(w),null);case 4:return F(),h===null&&IM(w.stateNode.containerInfo),Cn(w),null;case 10:return Hu(w.type),Cn(w),null;case 19:if(re(pi),M=w.memoizedState,M===null)return Cn(w),null;if(W=(w.flags&128)!==0,ee=M.rendering,ee===null)if(W)Uv(M,!1);else{if(Zn!==0||h!==null&&(h.flags&128)!==0)for(h=w.child;h!==null;){if(ee=qk(h),ee!==null){for(w.flags|=128,Uv(M,!1),h=ee.updateQueue,w.updateQueue=h,a_(w,h),w.subtreeFlags=0,h=_,_=w.child;_!==null;)A5(_,h),_=_.sibling;return me(pi,pi.current&1|2),Cr&&Bu(w,M.treeForkCount),w.child}h=h.sibling}M.tail!==null&&z()>o_&&(w.flags|=128,W=!0,Uv(M,!1),w.lanes=4194304)}else{if(!W)if(h=qk(ee),h!==null){if(w.flags|=128,W=!0,h=h.updateQueue,w.updateQueue=h,a_(w,h),Uv(M,!0),M.tail===null&&M.tailMode==="hidden"&&!ee.alternate&&!Cr)return Cn(w),null}else 2*z()-M.renderingStartTime>o_&&_!==536870912&&(w.flags|=128,W=!0,Uv(M,!1),w.lanes=4194304);M.isBackwards?(ee.sibling=w.child,w.child=ee):(h=M.last,h!==null?h.sibling=ee:w.child=ee,M.last=ee)}return M.tail!==null?(h=M.tail,M.rendering=h,M.tail=h.sibling,M.renderingStartTime=z(),h.sibling=null,_=pi.current,me(pi,W?_&1|2:_&1),Cr&&Bu(w,M.treeForkCount),h):(Cn(w),null);case 22:case 23:return ll(w),Oj(),M=w.memoizedState!==null,h!==null?h.memoizedState!==null!==M&&(w.flags|=8192):M&&(w.flags|=8192),M?(_&536870912)!==0&&(w.flags&128)===0&&(Cn(w),w.subtreeFlags&6&&(w.flags|=8192)):Cn(w),_=w.updateQueue,_!==null&&a_(w,_.retryQueue),_=null,h!==null&&h.memoizedState!==null&&h.memoizedState.cachePool!==null&&(_=h.memoizedState.cachePool.pool),M=null,w.memoizedState!==null&&w.memoizedState.cachePool!==null&&(M=w.memoizedState.cachePool.pool),M!==_&&(w.flags|=2048),h!==null&&re(Af),null;case 24:return _=null,h!==null&&(_=h.memoizedState.cache),w.memoizedState.cache!==_&&(w.flags|=2048),Hu(Si),Cn(w),null;case 25:return null;case 30:return null}throw Error(n(156,w.tag))}function cue(h,w){switch(_j(w),w.tag){case 1:return h=w.flags,h&65536?(w.flags=h&-65537|128,w):null;case 3:return Hu(Si),F(),h=w.flags,(h&65536)!==0&&(h&128)===0?(w.flags=h&-65537|128,w):null;case 26:case 27:case 5:return V(w),null;case 31:if(w.memoizedState!==null){if(ll(w),w.alternate===null)throw Error(n(340));Cf()}return h=w.flags,h&65536?(w.flags=h&-65537|128,w):null;case 13:if(ll(w),h=w.memoizedState,h!==null&&h.dehydrated!==null){if(w.alternate===null)throw Error(n(340));Cf()}return h=w.flags,h&65536?(w.flags=h&-65537|128,w):null;case 19:return re(pi),null;case 4:return F(),null;case 10:return Hu(w.type),null;case 22:case 23:return ll(w),Oj(),h!==null&&re(Af),h=w.flags,h&65536?(w.flags=h&-65537|128,w):null;case 24:return Hu(Si),null;case 25:return null;default:return null}}function aH(h,w){switch(_j(w),w.tag){case 3:Hu(Si),F();break;case 26:case 27:case 5:V(w);break;case 4:F();break;case 31:w.memoizedState!==null&&ll(w);break;case 13:ll(w);break;case 19:re(pi);break;case 10:Hu(w.type);break;case 22:case 23:ll(w),Oj(),h!==null&&re(Af);break;case 24:Hu(Si)}}function Hv(h,w){try{var _=w.updateQueue,M=_!==null?_.lastEffect:null;if(M!==null){var W=M.next;_=W;do{if((_.tag&h)===h){M=void 0;var ee=_.create,Se=_.inst;M=ee(),Se.destroy=M}_=_.next}while(_!==W)}}catch(He){Wr(w,w.return,He)}}function Dp(h,w,_){try{var M=w.updateQueue,W=M!==null?M.lastEffect:null;if(W!==null){var ee=W.next;M=ee;do{if((M.tag&h)===h){var Se=M.inst,He=Se.destroy;if(He!==void 0){Se.destroy=void 0,W=w;var pt=_,Et=He;try{Et()}catch(qt){Wr(W,pt,qt)}}}M=M.next}while(M!==ee)}}catch(qt){Wr(w,w.return,qt)}}function rH(h){var w=h.updateQueue;if(w!==null){var _=h.stateNode;try{W5(w,_)}catch(M){Wr(h,h.return,M)}}}function nH(h,w,_){_.props=Ff(h.type,h.memoizedProps),_.state=h.memoizedState;try{_.componentWillUnmount()}catch(M){Wr(h,w,M)}}function qv(h,w){try{var _=h.ref;if(_!==null){switch(h.tag){case 26:case 27:case 5:var M=h.stateNode;break;case 30:M=h.stateNode;break;default:M=h.stateNode}typeof _=="function"?h.refCleanup=_(M):_.current=M}}catch(W){Wr(h,w,W)}}function Ld(h,w){var _=h.ref,M=h.refCleanup;if(_!==null)if(typeof M=="function")try{M()}catch(W){Wr(h,w,W)}finally{h.refCleanup=null,h=h.alternate,h!=null&&(h.refCleanup=null)}else if(typeof _=="function")try{_(null)}catch(W){Wr(h,w,W)}else _.current=null}function iH(h){var w=h.type,_=h.memoizedProps,M=h.stateNode;try{e:switch(w){case"button":case"input":case"select":case"textarea":_.autoFocus&&M.focus();break e;case"img":_.src?M.src=_.src:_.srcSet&&(M.srcset=_.srcSet)}}catch(W){Wr(h,h.return,W)}}function bM(h,w,_){try{var M=h.stateNode;Mue(M,h.type,_,w),M[Pt]=w}catch(W){Wr(h,h.return,W)}}function sH(h){return h.tag===5||h.tag===3||h.tag===26||h.tag===27&&Bp(h.type)||h.tag===4}function xM(h){e:for(;;){for(;h.sibling===null;){if(h.return===null||sH(h.return))return null;h=h.return}for(h.sibling.return=h.return,h=h.sibling;h.tag!==5&&h.tag!==6&&h.tag!==18;){if(h.tag===27&&Bp(h.type)||h.flags&2||h.child===null||h.tag===4)continue e;h.child.return=h,h=h.child}if(!(h.flags&2))return h.stateNode}}function yM(h,w,_){var M=h.tag;if(M===5||M===6)h=h.stateNode,w?(_.nodeType===9?_.body:_.nodeName==="HTML"?_.ownerDocument.body:_).insertBefore(h,w):(w=_.nodeType===9?_.body:_.nodeName==="HTML"?_.ownerDocument.body:_,w.appendChild(h),_=_._reactRootContainer,_!=null||w.onclick!==null||(w.onclick=Kt));else if(M!==4&&(M===27&&Bp(h.type)&&(_=h.stateNode,w=null),h=h.child,h!==null))for(yM(h,w,_),h=h.sibling;h!==null;)yM(h,w,_),h=h.sibling}function r_(h,w,_){var M=h.tag;if(M===5||M===6)h=h.stateNode,w?_.insertBefore(h,w):_.appendChild(h);else if(M!==4&&(M===27&&Bp(h.type)&&(_=h.stateNode),h=h.child,h!==null))for(r_(h,w,_),h=h.sibling;h!==null;)r_(h,w,_),h=h.sibling}function oH(h){var w=h.stateNode,_=h.memoizedProps;try{for(var M=h.type,W=w.attributes;W.length;)w.removeAttributeNode(W[0]);_s(w,M,_),w[vt]=h,w[Pt]=_}catch(ee){Wr(h,h.return,ee)}}var Wu=!1,Pi=!1,vM=!1,lH=typeof WeakSet=="function"?WeakSet:Set,Zi=null;function due(h,w){if(h=h.containerInfo,UM=__,h=uo(h),wi(h)){if("selectionStart"in h)var _={start:h.selectionStart,end:h.selectionEnd};else e:{_=(_=h.ownerDocument)&&_.defaultView||window;var M=_.getSelection&&_.getSelection();if(M&&M.rangeCount!==0){_=M.anchorNode;var W=M.anchorOffset,ee=M.focusNode;M=M.focusOffset;try{_.nodeType,ee.nodeType}catch{_=null;break e}var Se=0,He=-1,pt=-1,Et=0,qt=0,Wt=h,Lt=null;t:for(;;){for(var Bt;Wt!==_||W!==0&&Wt.nodeType!==3||(He=Se+W),Wt!==ee||M!==0&&Wt.nodeType!==3||(pt=Se+M),Wt.nodeType===3&&(Se+=Wt.nodeValue.length),(Bt=Wt.firstChild)!==null;)Lt=Wt,Wt=Bt;for(;;){if(Wt===h)break t;if(Lt===_&&++Et===W&&(He=Se),Lt===ee&&++qt===M&&(pt=Se),(Bt=Wt.nextSibling)!==null)break;Wt=Lt,Lt=Wt.parentNode}Wt=Bt}_=He===-1||pt===-1?null:{start:He,end:pt}}else _=null}_=_||{start:0,end:0}}else _=null;for(HM={focusedElem:h,selectionRange:_},__=!1,Zi=w;Zi!==null;)if(w=Zi,h=w.child,(w.subtreeFlags&1028)!==0&&h!==null)h.return=w,Zi=h;else for(;Zi!==null;){switch(w=Zi,ee=w.alternate,h=w.flags,w.tag){case 0:if((h&4)!==0&&(h=w.updateQueue,h=h!==null?h.events:null,h!==null))for(_=0;_<h.length;_++)W=h[_],W.ref.impl=W.nextImpl;break;case 11:case 15:break;case 1:if((h&1024)!==0&&ee!==null){h=void 0,_=w,W=ee.memoizedProps,ee=ee.memoizedState,M=_.stateNode;try{var wa=Ff(_.type,W);h=M.getSnapshotBeforeUpdate(wa,ee),M.__reactInternalSnapshotBeforeUpdate=h}catch(za){Wr(_,_.return,za)}}break;case 3:if((h&1024)!==0){if(h=w.stateNode.containerInfo,_=h.nodeType,_===9)$M(h);else if(_===1)switch(h.nodeName){case"HEAD":case"HTML":case"BODY":$M(h);break;default:h.textContent=""}}break;case 5:case 26:case 27:case 6:case 4:case 17:break;default:if((h&1024)!==0)throw Error(n(163))}if(h=w.sibling,h!==null){h.return=w.return,Zi=h;break}Zi=w.return}}function cH(h,w,_){var M=_.flags;switch(_.tag){case 0:case 11:case 15:Yu(h,_),M&4&&Hv(5,_);break;case 1:if(Yu(h,_),M&4)if(h=_.stateNode,w===null)try{h.componentDidMount()}catch(Se){Wr(_,_.return,Se)}else{var W=Ff(_.type,w.memoizedProps);w=w.memoizedState;try{h.componentDidUpdate(W,w,h.__reactInternalSnapshotBeforeUpdate)}catch(Se){Wr(_,_.return,Se)}}M&64&&rH(_),M&512&&qv(_,_.return);break;case 3:if(Yu(h,_),M&64&&(h=_.updateQueue,h!==null)){if(w=null,_.child!==null)switch(_.child.tag){case 27:case 5:w=_.child.stateNode;break;case 1:w=_.child.stateNode}try{W5(h,w)}catch(Se){Wr(_,_.return,Se)}}break;case 27:w===null&&M&4&&oH(_);case 26:case 5:Yu(h,_),w===null&&M&4&&iH(_),M&512&&qv(_,_.return);break;case 12:Yu(h,_);break;case 31:Yu(h,_),M&4&&mH(h,_);break;case 13:Yu(h,_),M&4&&pH(h,_),M&64&&(h=_.memoizedState,h!==null&&(h=h.dehydrated,h!==null&&(_=yue.bind(null,_),Oue(h,_))));break;case 22:if(M=_.memoizedState!==null||Wu,!M){w=w!==null&&w.memoizedState!==null||Pi,W=Wu;var ee=Pi;Wu=M,(Pi=w)&&!ee?Qu(h,_,(_.subtreeFlags&8772)!==0):Yu(h,_),Wu=W,Pi=ee}break;case 30:break;default:Yu(h,_)}}function dH(h){var w=h.alternate;w!==null&&(h.alternate=null,dH(w)),h.child=null,h.deletions=null,h.sibling=null,h.tag===5&&(w=h.stateNode,w!==null&&_e(w)),h.stateNode=null,h.return=null,h.dependencies=null,h.memoizedProps=null,h.memoizedState=null,h.pendingProps=null,h.stateNode=null,h.updateQueue=null}var Dn=null,Fo=!1;function Ku(h,w,_){for(_=_.child;_!==null;)uH(h,w,_),_=_.sibling}function uH(h,w,_){if(Ie&&typeof Ie.onCommitFiberUnmount=="function")try{Ie.onCommitFiberUnmount(Ce,_)}catch{}switch(_.tag){case 26:Pi||Ld(_,w),Ku(h,w,_),_.memoizedState?_.memoizedState.count--:_.stateNode&&(_=_.stateNode,_.parentNode.removeChild(_));break;case 27:Pi||Ld(_,w);var M=Dn,W=Fo;Bp(_.type)&&(Dn=_.stateNode,Fo=!1),Ku(h,w,_),Zv(_.stateNode),Dn=M,Fo=W;break;case 5:Pi||Ld(_,w);case 6:if(M=Dn,W=Fo,Dn=null,Ku(h,w,_),Dn=M,Fo=W,Dn!==null)if(Fo)try{(Dn.nodeType===9?Dn.body:Dn.nodeName==="HTML"?Dn.ownerDocument.body:Dn).removeChild(_.stateNode)}catch(ee){Wr(_,w,ee)}else try{Dn.removeChild(_.stateNode)}catch(ee){Wr(_,w,ee)}break;case 18:Dn!==null&&(Fo?(h=Dn,rq(h.nodeType===9?h.body:h.nodeName==="HTML"?h.ownerDocument.body:h,_.stateNode),Jb(h)):rq(Dn,_.stateNode));break;case 4:M=Dn,W=Fo,Dn=_.stateNode.containerInfo,Fo=!0,Ku(h,w,_),Dn=M,Fo=W;break;case 0:case 11:case 14:case 15:Dp(2,_,w),Pi||Dp(4,_,w),Ku(h,w,_);break;case 1:Pi||(Ld(_,w),M=_.stateNode,typeof M.componentWillUnmount=="function"&&nH(_,w,M)),Ku(h,w,_);break;case 21:Ku(h,w,_);break;case 22:Pi=(M=Pi)||_.memoizedState!==null,Ku(h,w,_),Pi=M;break;default:Ku(h,w,_)}}function mH(h,w){if(w.memoizedState===null&&(h=w.alternate,h!==null&&(h=h.memoizedState,h!==null))){h=h.dehydrated;try{Jb(h)}catch(_){Wr(w,w.return,_)}}}function pH(h,w){if(w.memoizedState===null&&(h=w.alternate,h!==null&&(h=h.memoizedState,h!==null&&(h=h.dehydrated,h!==null))))try{Jb(h)}catch(_){Wr(w,w.return,_)}}function uue(h){switch(h.tag){case 31:case 13:case 19:var w=h.stateNode;return w===null&&(w=h.stateNode=new lH),w;case 22:return h=h.stateNode,w=h._retryCache,w===null&&(w=h._retryCache=new lH),w;default:throw Error(n(435,h.tag))}}function n_(h,w){var _=uue(h);w.forEach(function(M){if(!_.has(M)){_.add(M);var W=vue.bind(null,h,M);M.then(W,W)}})}function Lo(h,w){var _=w.deletions;if(_!==null)for(var M=0;M<_.length;M++){var W=_[M],ee=h,Se=w,He=Se;e:for(;He!==null;){switch(He.tag){case 27:if(Bp(He.type)){Dn=He.stateNode,Fo=!1;break e}break;case 5:Dn=He.stateNode,Fo=!1;break e;case 3:case 4:Dn=He.stateNode.containerInfo,Fo=!0;break e}He=He.return}if(Dn===null)throw Error(n(160));uH(ee,Se,W),Dn=null,Fo=!1,ee=W.alternate,ee!==null&&(ee.return=null),W.return=null}if(w.subtreeFlags&13886)for(w=w.child;w!==null;)hH(w,h),w=w.sibling}var Vc=null;function hH(h,w){var _=h.alternate,M=h.flags;switch(h.tag){case 0:case 11:case 14:case 15:Lo(w,h),Ro(h),M&4&&(Dp(3,h,h.return),Hv(3,h),Dp(5,h,h.return));break;case 1:Lo(w,h),Ro(h),M&512&&(Pi||_===null||Ld(_,_.return)),M&64&&Wu&&(h=h.updateQueue,h!==null&&(M=h.callbacks,M!==null&&(_=h.shared.hiddenCallbacks,h.shared.hiddenCallbacks=_===null?M:_.concat(M))));break;case 26:var W=Vc;if(Lo(w,h),Ro(h),M&512&&(Pi||_===null||Ld(_,_.return)),M&4){var ee=_!==null?_.memoizedState:null;if(M=h.memoizedState,_===null)if(M===null)if(h.stateNode===null){e:{M=h.type,_=h.memoizedProps,W=W.ownerDocument||W;t:switch(M){case"title":ee=W.getElementsByTagName("title")[0],(!ee||ee[Te]||ee[vt]||ee.namespaceURI==="http://www.w3.org/2000/svg"||ee.hasAttribute("itemprop"))&&(ee=W.createElement(M),W.head.insertBefore(ee,W.querySelector("head > title"))),_s(ee,M,_),ee[vt]=h,nt(ee),M=ee;break e;case"link":var Se=hq("link","href",W).get(M+(_.href||""));if(Se){for(var He=0;He<Se.length;He++)if(ee=Se[He],ee.getAttribute("href")===(_.href==null||_.href===""?null:_.href)&&ee.getAttribute("rel")===(_.rel==null?null:_.rel)&&ee.getAttribute("title")===(_.title==null?null:_.title)&&ee.getAttribute("crossorigin")===(_.crossOrigin==null?null:_.crossOrigin)){Se.splice(He,1);break t}}ee=W.createElement(M),_s(ee,M,_),W.head.appendChild(ee);break;case"meta":if(Se=hq("meta","content",W).get(M+(_.content||""))){for(He=0;He<Se.length;He++)if(ee=Se[He],ee.getAttribute("content")===(_.content==null?null:""+_.content)&&ee.getAttribute("name")===(_.name==null?null:_.name)&&ee.getAttribute("property")===(_.property==null?null:_.property)&&ee.getAttribute("http-equiv")===(_.httpEquiv==null?null:_.httpEquiv)&&ee.getAttribute("charset")===(_.charSet==null?null:_.charSet)){Se.splice(He,1);break t}}ee=W.createElement(M),_s(ee,M,_),W.head.appendChild(ee);break;default:throw Error(n(468,M))}ee[vt]=h,nt(ee),M=ee}h.stateNode=M}else fq(W,h.type,h.stateNode);else h.stateNode=pq(W,M,h.memoizedProps);else ee!==M?(ee===null?_.stateNode!==null&&(_=_.stateNode,_.parentNode.removeChild(_)):ee.count--,M===null?fq(W,h.type,h.stateNode):pq(W,M,h.memoizedProps)):M===null&&h.stateNode!==null&&bM(h,h.memoizedProps,_.memoizedProps)}break;case 27:Lo(w,h),Ro(h),M&512&&(Pi||_===null||Ld(_,_.return)),_!==null&&M&4&&bM(h,h.memoizedProps,_.memoizedProps);break;case 5:if(Lo(w,h),Ro(h),M&512&&(Pi||_===null||Ld(_,_.return)),h.flags&32){W=h.stateNode;try{yi(W,"")}catch(wa){Wr(h,h.return,wa)}}M&4&&h.stateNode!=null&&(W=h.memoizedProps,bM(h,W,_!==null?_.memoizedProps:W)),M&1024&&(vM=!0);break;case 6:if(Lo(w,h),Ro(h),M&4){if(h.stateNode===null)throw Error(n(162));M=h.memoizedProps,_=h.stateNode;try{_.nodeValue=M}catch(wa){Wr(h,h.return,wa)}}break;case 3:if(v_=null,W=Vc,Vc=x_(w.containerInfo),Lo(w,h),Vc=W,Ro(h),M&4&&_!==null&&_.memoizedState.isDehydrated)try{Jb(w.containerInfo)}catch(wa){Wr(h,h.return,wa)}vM&&(vM=!1,fH(h));break;case 4:M=Vc,Vc=x_(h.stateNode.containerInfo),Lo(w,h),Ro(h),Vc=M;break;case 12:Lo(w,h),Ro(h);break;case 31:Lo(w,h),Ro(h),M&4&&(M=h.updateQueue,M!==null&&(h.updateQueue=null,n_(h,M)));break;case 13:Lo(w,h),Ro(h),h.child.flags&8192&&h.memoizedState!==null!=(_!==null&&_.memoizedState!==null)&&(s_=z()),M&4&&(M=h.updateQueue,M!==null&&(h.updateQueue=null,n_(h,M)));break;case 22:W=h.memoizedState!==null;var pt=_!==null&&_.memoizedState!==null,Et=Wu,qt=Pi;if(Wu=Et||W,Pi=qt||pt,Lo(w,h),Pi=qt,Wu=Et,Ro(h),M&8192)e:for(w=h.stateNode,w._visibility=W?w._visibility&-2:w._visibility|1,W&&(_===null||pt||Wu||Pi||Lf(h)),_=null,w=h;;){if(w.tag===5||w.tag===26){if(_===null){pt=_=w;try{if(ee=pt.stateNode,W)Se=ee.style,typeof Se.setProperty=="function"?Se.setProperty("display","none","important"):Se.display="none";else{He=pt.stateNode;var Wt=pt.memoizedProps.style,Lt=Wt!=null&&Wt.hasOwnProperty("display")?Wt.display:null;He.style.display=Lt==null||typeof Lt=="boolean"?"":(""+Lt).trim()}}catch(wa){Wr(pt,pt.return,wa)}}}else if(w.tag===6){if(_===null){pt=w;try{pt.stateNode.nodeValue=W?"":pt.memoizedProps}catch(wa){Wr(pt,pt.return,wa)}}}else if(w.tag===18){if(_===null){pt=w;try{var Bt=pt.stateNode;W?nq(Bt,!0):nq(pt.stateNode,!1)}catch(wa){Wr(pt,pt.return,wa)}}}else if((w.tag!==22&&w.tag!==23||w.memoizedState===null||w===h)&&w.child!==null){w.child.return=w,w=w.child;continue}if(w===h)break e;for(;w.sibling===null;){if(w.return===null||w.return===h)break e;_===w&&(_=null),w=w.return}_===w&&(_=null),w.sibling.return=w.return,w=w.sibling}M&4&&(M=h.updateQueue,M!==null&&(_=M.retryQueue,_!==null&&(M.retryQueue=null,n_(h,_))));break;case 19:Lo(w,h),Ro(h),M&4&&(M=h.updateQueue,M!==null&&(h.updateQueue=null,n_(h,M)));break;case 30:break;case 21:break;default:Lo(w,h),Ro(h)}}function Ro(h){var w=h.flags;if(w&2){try{for(var _,M=h.return;M!==null;){if(sH(M)){_=M;break}M=M.return}if(_==null)throw Error(n(160));switch(_.tag){case 27:var W=_.stateNode,ee=xM(h);r_(h,ee,W);break;case 5:var Se=_.stateNode;_.flags&32&&(yi(Se,""),_.flags&=-33);var He=xM(h);r_(h,He,Se);break;case 3:case 4:var pt=_.stateNode.containerInfo,Et=xM(h);yM(h,Et,pt);break;default:throw Error(n(161))}}catch(qt){Wr(h,h.return,qt)}h.flags&=-3}w&4096&&(h.flags&=-4097)}function fH(h){if(h.subtreeFlags&1024)for(h=h.child;h!==null;){var w=h;fH(w),w.tag===5&&w.flags&1024&&w.stateNode.reset(),h=h.sibling}}function Yu(h,w){if(w.subtreeFlags&8772)for(w=w.child;w!==null;)cH(h,w.alternate,w),w=w.sibling}function Lf(h){for(h=h.child;h!==null;){var w=h;switch(w.tag){case 0:case 11:case 14:case 15:Dp(4,w,w.return),Lf(w);break;case 1:Ld(w,w.return);var _=w.stateNode;typeof _.componentWillUnmount=="function"&&nH(w,w.return,_),Lf(w);break;case 27:Zv(w.stateNode);case 26:case 5:Ld(w,w.return),Lf(w);break;case 22:w.memoizedState===null&&Lf(w);break;case 30:Lf(w);break;default:Lf(w)}h=h.sibling}}function Qu(h,w,_){for(_=_&&(w.subtreeFlags&8772)!==0,w=w.child;w!==null;){var M=w.alternate,W=h,ee=w,Se=ee.flags;switch(ee.tag){case 0:case 11:case 15:Qu(W,ee,_),Hv(4,ee);break;case 1:if(Qu(W,ee,_),M=ee,W=M.stateNode,typeof W.componentDidMount=="function")try{W.componentDidMount()}catch(Et){Wr(M,M.return,Et)}if(M=ee,W=M.updateQueue,W!==null){var He=M.stateNode;try{var pt=W.shared.hiddenCallbacks;if(pt!==null)for(W.shared.hiddenCallbacks=null,W=0;W<pt.length;W++)V5(pt[W],He)}catch(Et){Wr(M,M.return,Et)}}_&&Se&64&&rH(ee),qv(ee,ee.return);break;case 27:oH(ee);case 26:case 5:Qu(W,ee,_),_&&M===null&&Se&4&&iH(ee),qv(ee,ee.return);break;case 12:Qu(W,ee,_);break;case 31:Qu(W,ee,_),_&&Se&4&&mH(W,ee);break;case 13:Qu(W,ee,_),_&&Se&4&&pH(W,ee);break;case 22:ee.memoizedState===null&&Qu(W,ee,_),qv(ee,ee.return);break;case 30:break;default:Qu(W,ee,_)}w=w.sibling}}function wM(h,w){var _=null;h!==null&&h.memoizedState!==null&&h.memoizedState.cachePool!==null&&(_=h.memoizedState.cachePool.pool),h=null,w.memoizedState!==null&&w.memoizedState.cachePool!==null&&(h=w.memoizedState.cachePool.pool),h!==_&&(h!=null&&h.refCount++,_!=null&&Av(_))}function SM(h,w){h=null,w.alternate!==null&&(h=w.alternate.memoizedState.cache),w=w.memoizedState.cache,w!==h&&(w.refCount++,h!=null&&Av(h))}function Wc(h,w,_,M){if(w.subtreeFlags&10256)for(w=w.child;w!==null;)gH(h,w,_,M),w=w.sibling}function gH(h,w,_,M){var W=w.flags;switch(w.tag){case 0:case 11:case 15:Wc(h,w,_,M),W&2048&&Hv(9,w);break;case 1:Wc(h,w,_,M);break;case 3:Wc(h,w,_,M),W&2048&&(h=null,w.alternate!==null&&(h=w.alternate.memoizedState.cache),w=w.memoizedState.cache,w!==h&&(w.refCount++,h!=null&&Av(h)));break;case 12:if(W&2048){Wc(h,w,_,M),h=w.stateNode;try{var ee=w.memoizedProps,Se=ee.id,He=ee.onPostCommit;typeof He=="function"&&He(Se,w.alternate===null?"mount":"update",h.passiveEffectDuration,-0)}catch(pt){Wr(w,w.return,pt)}}else Wc(h,w,_,M);break;case 31:Wc(h,w,_,M);break;case 13:Wc(h,w,_,M);break;case 23:break;case 22:ee=w.stateNode,Se=w.alternate,w.memoizedState!==null?ee._visibility&2?Wc(h,w,_,M):Gv(h,w):ee._visibility&2?Wc(h,w,_,M):(ee._visibility|=2,Hb(h,w,_,M,(w.subtreeFlags&10256)!==0||!1)),W&2048&&wM(Se,w);break;case 24:Wc(h,w,_,M),W&2048&&SM(w.alternate,w);break;default:Wc(h,w,_,M)}}function Hb(h,w,_,M,W){for(W=W&&((w.subtreeFlags&10256)!==0||!1),w=w.child;w!==null;){var ee=h,Se=w,He=_,pt=M,Et=Se.flags;switch(Se.tag){case 0:case 11:case 15:Hb(ee,Se,He,pt,W),Hv(8,Se);break;case 23:break;case 22:var qt=Se.stateNode;Se.memoizedState!==null?qt._visibility&2?Hb(ee,Se,He,pt,W):Gv(ee,Se):(qt._visibility|=2,Hb(ee,Se,He,pt,W)),W&&Et&2048&&wM(Se.alternate,Se);break;case 24:Hb(ee,Se,He,pt,W),W&&Et&2048&&SM(Se.alternate,Se);break;default:Hb(ee,Se,He,pt,W)}w=w.sibling}}function Gv(h,w){if(w.subtreeFlags&10256)for(w=w.child;w!==null;){var _=h,M=w,W=M.flags;switch(M.tag){case 22:Gv(_,M),W&2048&&wM(M.alternate,M);break;case 24:Gv(_,M),W&2048&&SM(M.alternate,M);break;default:Gv(_,M)}w=w.sibling}}var $v=8192;function qb(h,w,_){if(h.subtreeFlags&$v)for(h=h.child;h!==null;)bH(h,w,_),h=h.sibling}function bH(h,w,_){switch(h.tag){case 26:qb(h,w,_),h.flags&$v&&h.memoizedState!==null&&Xue(_,Vc,h.memoizedState,h.memoizedProps);break;case 5:qb(h,w,_);break;case 3:case 4:var M=Vc;Vc=x_(h.stateNode.containerInfo),qb(h,w,_),Vc=M;break;case 22:h.memoizedState===null&&(M=h.alternate,M!==null&&M.memoizedState!==null?(M=$v,$v=16777216,qb(h,w,_),$v=M):qb(h,w,_));break;default:qb(h,w,_)}}function xH(h){var w=h.alternate;if(w!==null&&(h=w.child,h!==null)){w.child=null;do w=h.sibling,h.sibling=null,h=w;while(h!==null)}}function Vv(h){var w=h.deletions;if((h.flags&16)!==0){if(w!==null)for(var _=0;_<w.length;_++){var M=w[_];Zi=M,vH(M,h)}xH(h)}if(h.subtreeFlags&10256)for(h=h.child;h!==null;)yH(h),h=h.sibling}function yH(h){switch(h.tag){case 0:case 11:case 15:Vv(h),h.flags&2048&&Dp(9,h,h.return);break;case 3:Vv(h);break;case 12:Vv(h);break;case 22:var w=h.stateNode;h.memoizedState!==null&&w._visibility&2&&(h.return===null||h.return.tag!==13)?(w._visibility&=-3,i_(h)):Vv(h);break;default:Vv(h)}}function i_(h){var w=h.deletions;if((h.flags&16)!==0){if(w!==null)for(var _=0;_<w.length;_++){var M=w[_];Zi=M,vH(M,h)}xH(h)}for(h=h.child;h!==null;){switch(w=h,w.tag){case 0:case 11:case 15:Dp(8,w,w.return),i_(w);break;case 22:_=w.stateNode,_._visibility&2&&(_._visibility&=-3,i_(w));break;default:i_(w)}h=h.sibling}}function vH(h,w){for(;Zi!==null;){var _=Zi;switch(_.tag){case 0:case 11:case 15:Dp(8,_,w);break;case 23:case 22:if(_.memoizedState!==null&&_.memoizedState.cachePool!==null){var M=_.memoizedState.cachePool.pool;M!=null&&M.refCount++}break;case 24:Av(_.memoizedState.cache)}if(M=_.child,M!==null)M.return=_,Zi=M;else e:for(_=h;Zi!==null;){M=Zi;var W=M.sibling,ee=M.return;if(dH(M),M===_){Zi=null;break e}if(W!==null){W.return=ee,Zi=W;break e}Zi=ee}}}var mue={getCacheForType:function(h){var w=Ss(Si),_=w.data.get(h);return _===void 0&&(_=h(),w.data.set(h,_)),_},cacheSignal:function(){return Ss(Si).controller.signal}},pue=typeof WeakMap=="function"?WeakMap:Map,Br=0,hn=null,vr=null,kr=0,Vr=0,cl=null,Fp=!1,Gb=!1,kM=!1,Xu=0,Zn=0,Lp=0,Rf=0,_M=0,dl=0,$b=0,Wv=null,zo=null,PM=!1,s_=0,wH=0,o_=1/0,l_=null,Rp=null,Ii=0,zp=null,Vb=null,Zu=0,CM=0,NM=null,SH=null,Kv=0,TM=null;function ul(){return(Br&2)!==0&&kr!==0?kr&-kr:te.T!==null?FM():oa()}function kH(){if(dl===0)if((kr&536870912)===0||Cr){var h=je;je<<=1,(je&3932160)===0&&(je=262144),dl=h}else dl=536870912;return h=ol.current,h!==null&&(h.flags|=32),dl}function Io(h,w,_){(h===hn&&(Vr===2||Vr===9)||h.cancelPendingCommit!==null)&&(Wb(h,0),Ip(h,kr,dl,!1)),rt(h,_),((Br&2)===0||h!==hn)&&(h===hn&&((Br&2)===0&&(Rf|=_),Zn===4&&Ip(h,kr,dl,!1)),Rd(h))}function _H(h,w,_){if((Br&6)!==0)throw Error(n(327));var M=!_&&(w&127)===0&&(w&h.expiredLanes)===0||Oe(h,w),W=M?gue(h,w):jM(h,w,!0),ee=M;do{if(W===0){Gb&&!M&&Ip(h,w,0,!1);break}else{if(_=h.current.alternate,ee&&!hue(_)){W=jM(h,w,!1),ee=!1;continue}if(W===2){if(ee=w,h.errorRecoveryDisabledLanes&ee)var Se=0;else Se=h.pendingLanes&-536870913,Se=Se!==0?Se:Se&536870912?536870912:0;if(Se!==0){w=Se;e:{var He=h;W=Wv;var pt=He.current.memoizedState.isDehydrated;if(pt&&(Wb(He,Se).flags|=256),Se=jM(He,Se,!1),Se!==2){if(kM&&!pt){He.errorRecoveryDisabledLanes|=ee,Rf|=ee,W=4;break e}ee=zo,zo=W,ee!==null&&(zo===null?zo=ee:zo.push.apply(zo,ee))}W=Se}if(ee=!1,W!==2)continue}}if(W===1){Wb(h,0),Ip(h,w,0,!0);break}e:{switch(M=h,ee=W,ee){case 0:case 1:throw Error(n(345));case 4:if((w&4194048)!==w)break;case 6:Ip(M,w,dl,!Fp);break e;case 2:zo=null;break;case 3:case 5:break;default:throw Error(n(329))}if((w&62914560)===w&&(W=s_+300-z(),10<W)){if(Ip(M,w,dl,!Fp),Ne(M,0,!0)!==0)break e;Zu=w,M.timeoutHandle=tq(PH.bind(null,M,_,zo,l_,PM,w,dl,Rf,$b,Fp,ee,"Throttled",-0,0),W);break e}PH(M,_,zo,l_,PM,w,dl,Rf,$b,Fp,ee,null,-0,0)}}break}while(!0);Rd(h)}function PH(h,w,_,M,W,ee,Se,He,pt,Et,qt,Wt,Lt,Bt){if(h.timeoutHandle=-1,Wt=w.subtreeFlags,Wt&8192||(Wt&16785408)===16785408){Wt={stylesheets:null,count:0,imgCount:0,imgBytes:0,suspenseyImages:[],waitingForImages:!0,waitingForViewTransition:!1,unsuspend:Kt},bH(w,ee,Wt);var wa=(ee&62914560)===ee?s_-z():(ee&4194048)===ee?wH-z():0;if(wa=Zue(Wt,wa),wa!==null){Zu=ee,h.cancelPendingCommit=wa(DH.bind(null,h,w,ee,_,M,W,Se,He,pt,qt,Wt,null,Lt,Bt)),Ip(h,ee,Se,!Et);return}}DH(h,w,ee,_,M,W,Se,He,pt)}function hue(h){for(var w=h;;){var _=w.tag;if((_===0||_===11||_===15)&&w.flags&16384&&(_=w.updateQueue,_!==null&&(_=_.stores,_!==null)))for(var M=0;M<_.length;M++){var W=_[M],ee=W.getSnapshot;W=W.value;try{if(!En(ee(),W))return!1}catch{return!1}}if(_=w.child,w.subtreeFlags&16384&&_!==null)_.return=w,w=_;else{if(w===h)break;for(;w.sibling===null;){if(w.return===null||w.return===h)return!0;w=w.return}w.sibling.return=w.return,w=w.sibling}}return!0}function Ip(h,w,_,M){w&=~_M,w&=~Rf,h.suspendedLanes|=w,h.pingedLanes&=~w,M&&(h.warmLanes|=w),M=h.expirationTimes;for(var W=w;0<W;){var ee=31-qe(W),Se=1<<ee;M[ee]=-1,W&=~Se}_!==0&&Ct(h,_,w)}function c_(){return(Br&6)===0?(Yv(0),!1):!0}function AM(){if(vr!==null){if(Vr===0)var h=vr.return;else h=vr,Uu=Nf=null,$j(h),zb=null,Mv=0,h=vr;for(;h!==null;)aH(h.alternate,h),h=h.return;vr=null}}function Wb(h,w){var _=h.timeoutHandle;_!==-1&&(h.timeoutHandle=-1,Fue(_)),_=h.cancelPendingCommit,_!==null&&(h.cancelPendingCommit=null,_()),Zu=0,AM(),hn=h,vr=_=Ou(h.current,null),kr=w,Vr=0,cl=null,Fp=!1,Gb=Oe(h,w),kM=!1,$b=dl=_M=Rf=Lp=Zn=0,zo=Wv=null,PM=!1,(w&8)!==0&&(w|=w&32);var M=h.entangledLanes;if(M!==0)for(h=h.entanglements,M&=w;0<M;){var W=31-qe(M),ee=1<<W;w|=h[W],M&=~ee}return Xu=w,jk(),_}function CH(h,w){er=null,te.H=Ov,w===Rb||w===Ik?(w=H5(),Vr=3):w===Dj?(w=H5(),Vr=4):Vr=w===oM?8:w!==null&&typeof w=="object"&&typeof w.then=="function"?6:1,cl=w,vr===null&&(Zn=1,Zk(h,$l(w,h.current)))}function NH(){var h=ol.current;return h===null?!0:(kr&4194048)===kr?Yl===null:(kr&62914560)===kr||(kr&536870912)!==0?h===Yl:!1}function TH(){var h=te.H;return te.H=Ov,h===null?Ov:h}function AH(){var h=te.A;return te.A=mue,h}function d_(){Zn=4,Fp||(kr&4194048)!==kr&&ol.current!==null||(Gb=!0),(Lp&134217727)===0&&(Rf&134217727)===0||hn===null||Ip(hn,kr,dl,!1)}function jM(h,w,_){var M=Br;Br|=2;var W=TH(),ee=AH();(hn!==h||kr!==w)&&(l_=null,Wb(h,w)),w=!1;var Se=Zn;e:do try{if(Vr!==0&&vr!==null){var He=vr,pt=cl;switch(Vr){case 8:AM(),Se=6;break e;case 3:case 2:case 9:case 6:ol.current===null&&(w=!0);var Et=Vr;if(Vr=0,cl=null,Kb(h,He,pt,Et),_&&Gb){Se=0;break e}break;default:Et=Vr,Vr=0,cl=null,Kb(h,He,pt,Et)}}fue(),Se=Zn;break}catch(qt){CH(h,qt)}while(!0);return w&&h.shellSuspendCounter++,Uu=Nf=null,Br=M,te.H=W,te.A=ee,vr===null&&(hn=null,kr=0,jk()),Se}function fue(){for(;vr!==null;)jH(vr)}function gue(h,w){var _=Br;Br|=2;var M=TH(),W=AH();hn!==h||kr!==w?(l_=null,o_=z()+500,Wb(h,w)):Gb=Oe(h,w);e:do try{if(Vr!==0&&vr!==null){w=vr;var ee=cl;t:switch(Vr){case 1:Vr=0,cl=null,Kb(h,w,ee,1);break;case 2:case 9:if(B5(ee)){Vr=0,cl=null,MH(w);break}w=function(){Vr!==2&&Vr!==9||hn!==h||(Vr=7),Rd(h)},ee.then(w,w);break e;case 3:Vr=7;break e;case 4:Vr=5;break e;case 7:B5(ee)?(Vr=0,cl=null,MH(w)):(Vr=0,cl=null,Kb(h,w,ee,7));break;case 5:var Se=null;switch(vr.tag){case 26:Se=vr.memoizedState;case 5:case 27:var He=vr;if(Se?gq(Se):He.stateNode.complete){Vr=0,cl=null;var pt=He.sibling;if(pt!==null)vr=pt;else{var Et=He.return;Et!==null?(vr=Et,u_(Et)):vr=null}break t}}Vr=0,cl=null,Kb(h,w,ee,5);break;case 6:Vr=0,cl=null,Kb(h,w,ee,6);break;case 8:AM(),Zn=6;break e;default:throw Error(n(462))}}bue();break}catch(qt){CH(h,qt)}while(!0);return Uu=Nf=null,te.H=M,te.A=W,Br=_,vr!==null?0:(hn=null,kr=0,jk(),Zn)}function bue(){for(;vr!==null&&!fe();)jH(vr)}function jH(h){var w=eH(h.alternate,h,Xu);h.memoizedProps=h.pendingProps,w===null?u_(h):vr=w}function MH(h){var w=h,_=w.alternate;switch(w.tag){case 15:case 0:w=KU(_,w,w.pendingProps,w.type,void 0,kr);break;case 11:w=KU(_,w,w.pendingProps,w.type.render,w.ref,kr);break;case 5:$j(w);default:aH(_,w),w=vr=A5(w,Xu),w=eH(_,w,Xu)}h.memoizedProps=h.pendingProps,w===null?u_(h):vr=w}function Kb(h,w,_,M){Uu=Nf=null,$j(w),zb=null,Mv=0;var W=w.return;try{if(iue(h,W,w,_,kr)){Zn=1,Zk(h,$l(_,h.current)),vr=null;return}}catch(ee){if(W!==null)throw vr=W,ee;Zn=1,Zk(h,$l(_,h.current)),vr=null;return}w.flags&32768?(Cr||M===1?h=!0:Gb||(kr&536870912)!==0?h=!1:(Fp=h=!0,(M===2||M===9||M===3||M===6)&&(M=ol.current,M!==null&&M.tag===13&&(M.flags|=16384))),EH(w,h)):u_(w)}function u_(h){var w=h;do{if((w.flags&32768)!==0){EH(w,Fp);return}h=w.return;var _=lue(w.alternate,w,Xu);if(_!==null){vr=_;return}if(w=w.sibling,w!==null){vr=w;return}vr=w=h}while(w!==null);Zn===0&&(Zn=5)}function EH(h,w){do{var _=cue(h.alternate,h);if(_!==null){_.flags&=32767,vr=_;return}if(_=h.return,_!==null&&(_.flags|=32768,_.subtreeFlags=0,_.deletions=null),!w&&(h=h.sibling,h!==null)){vr=h;return}vr=h=_}while(h!==null);Zn=6,vr=null}function DH(h,w,_,M,W,ee,Se,He,pt){h.cancelPendingCommit=null;do m_();while(Ii!==0);if((Br&6)!==0)throw Error(n(327));if(w!==null){if(w===h.current)throw Error(n(177));if(ee=w.lanes|w.childLanes,ee|=xj,et(h,_,ee,Se,He,pt),h===hn&&(vr=hn=null,kr=0),Vb=w,zp=h,Zu=_,CM=ee,NM=W,SH=M,(w.subtreeFlags&10256)!==0||(w.flags&10256)!==0?(h.callbackNode=null,h.callbackPriority=0,wue(ve,function(){return IH(),null})):(h.callbackNode=null,h.callbackPriority=0),M=(w.flags&13878)!==0,(w.subtreeFlags&13878)!==0||M){M=te.T,te.T=null,W=J.p,J.p=2,Se=Br,Br|=4;try{due(h,w,_)}finally{Br=Se,J.p=W,te.T=M}}Ii=1,FH(),LH(),RH()}}function FH(){if(Ii===1){Ii=0;var h=zp,w=Vb,_=(w.flags&13878)!==0;if((w.subtreeFlags&13878)!==0||_){_=te.T,te.T=null;var M=J.p;J.p=2;var W=Br;Br|=4;try{hH(w,h);var ee=HM,Se=uo(h.containerInfo),He=ee.focusedElem,pt=ee.selectionRange;if(Se!==He&&He&&He.ownerDocument&&Do(He.ownerDocument.documentElement,He)){if(pt!==null&&wi(He)){var Et=pt.start,qt=pt.end;if(qt===void 0&&(qt=Et),"selectionStart"in He)He.selectionStart=Et,He.selectionEnd=Math.min(qt,He.value.length);else{var Wt=He.ownerDocument||document,Lt=Wt&&Wt.defaultView||window;if(Lt.getSelection){var Bt=Lt.getSelection(),wa=He.textContent.length,za=Math.min(pt.start,wa),an=pt.end===void 0?za:Math.min(pt.end,wa);!Bt.extend&&za>an&&(Se=an,an=za,za=Se);var kt=Zr(He,za),xt=Zr(He,an);if(kt&&xt&&(Bt.rangeCount!==1||Bt.anchorNode!==kt.node||Bt.anchorOffset!==kt.offset||Bt.focusNode!==xt.node||Bt.focusOffset!==xt.offset)){var Mt=Wt.createRange();Mt.setStart(kt.node,kt.offset),Bt.removeAllRanges(),za>an?(Bt.addRange(Mt),Bt.extend(xt.node,xt.offset)):(Mt.setEnd(xt.node,xt.offset),Bt.addRange(Mt))}}}}for(Wt=[],Bt=He;Bt=Bt.parentNode;)Bt.nodeType===1&&Wt.push({element:Bt,left:Bt.scrollLeft,top:Bt.scrollTop});for(typeof He.focus=="function"&&He.focus(),He=0;He<Wt.length;He++){var $t=Wt[He];$t.element.scrollLeft=$t.left,$t.element.scrollTop=$t.top}}__=!!UM,HM=UM=null}finally{Br=W,J.p=M,te.T=_}}h.current=w,Ii=2}}function LH(){if(Ii===2){Ii=0;var h=zp,w=Vb,_=(w.flags&8772)!==0;if((w.subtreeFlags&8772)!==0||_){_=te.T,te.T=null;var M=J.p;J.p=2;var W=Br;Br|=4;try{cH(h,w.alternate,w)}finally{Br=W,J.p=M,te.T=_}}Ii=3}}function RH(){if(Ii===4||Ii===3){Ii=0,$();var h=zp,w=Vb,_=Zu,M=SH;(w.subtreeFlags&10256)!==0||(w.flags&10256)!==0?Ii=5:(Ii=0,Vb=zp=null,zH(h,h.pendingLanes));var W=h.pendingLanes;if(W===0&&(Rp=null),Zt(_),w=w.stateNode,Ie&&typeof Ie.onCommitFiberRoot=="function")try{Ie.onCommitFiberRoot(Ce,w,void 0,(w.current.flags&128)===128)}catch{}if(M!==null){w=te.T,W=J.p,J.p=2,te.T=null;try{for(var ee=h.onRecoverableError,Se=0;Se<M.length;Se++){var He=M[Se];ee(He.value,{componentStack:He.stack})}}finally{te.T=w,J.p=W}}(Zu&3)!==0&&m_(),Rd(h),W=h.pendingLanes,(_&261930)!==0&&(W&42)!==0?h===TM?Kv++:(Kv=0,TM=h):Kv=0,Yv(0)}}function zH(h,w){(h.pooledCacheLanes&=w)===0&&(w=h.pooledCache,w!=null&&(h.pooledCache=null,Av(w)))}function m_(){return FH(),LH(),RH(),IH()}function IH(){if(Ii!==5)return!1;var h=zp,w=CM;CM=0;var _=Zt(Zu),M=te.T,W=J.p;try{J.p=32>_?32:_,te.T=null,_=NM,NM=null;var ee=zp,Se=Zu;if(Ii=0,Vb=zp=null,Zu=0,(Br&6)!==0)throw Error(n(331));var He=Br;if(Br|=4,yH(ee.current),gH(ee,ee.current,Se,_),Br=He,Yv(0,!1),Ie&&typeof Ie.onPostCommitFiberRoot=="function")try{Ie.onPostCommitFiberRoot(Ce,ee)}catch{}return!0}finally{J.p=W,te.T=M,zH(h,w)}}function OH(h,w,_){w=$l(_,w),w=sM(h.stateNode,w,2),h=jp(h,w,2),h!==null&&(rt(h,2),Rd(h))}function Wr(h,w,_){if(h.tag===3)OH(h,h,_);else for(;w!==null;){if(w.tag===3){OH(w,h,_);break}else if(w.tag===1){var M=w.stateNode;if(typeof w.type.getDerivedStateFromError=="function"||typeof M.componentDidCatch=="function"&&(Rp===null||!Rp.has(M))){h=$l(_,h),_=BU(2),M=jp(w,_,2),M!==null&&(UU(_,M,w,h),rt(M,2),Rd(M));break}}w=w.return}}function MM(h,w,_){var M=h.pingCache;if(M===null){M=h.pingCache=new pue;var W=new Set;M.set(w,W)}else W=M.get(w),W===void 0&&(W=new Set,M.set(w,W));W.has(_)||(kM=!0,W.add(_),h=xue.bind(null,h,w,_),w.then(h,h))}function xue(h,w,_){var M=h.pingCache;M!==null&&M.delete(w),h.pingedLanes|=h.suspendedLanes&_,h.warmLanes&=~_,hn===h&&(kr&_)===_&&(Zn===4||Zn===3&&(kr&62914560)===kr&&300>z()-s_?(Br&2)===0&&Wb(h,0):_M|=_,$b===kr&&($b=0)),Rd(h)}function BH(h,w){w===0&&(w=We()),h=_f(h,w),h!==null&&(rt(h,w),Rd(h))}function yue(h){var w=h.memoizedState,_=0;w!==null&&(_=w.retryLane),BH(h,_)}function vue(h,w){var _=0;switch(h.tag){case 31:case 13:var M=h.stateNode,W=h.memoizedState;W!==null&&(_=W.retryLane);break;case 19:M=h.stateNode;break;case 22:M=h.stateNode._retryCache;break;default:throw Error(n(314))}M!==null&&M.delete(w),BH(h,_)}function wue(h,w){return he(h,w)}var p_=null,Yb=null,EM=!1,h_=!1,DM=!1,Op=0;function Rd(h){h!==Yb&&h.next===null&&(Yb===null?p_=Yb=h:Yb=Yb.next=h),h_=!0,EM||(EM=!0,kue())}function Yv(h,w){if(!DM&&h_){DM=!0;do for(var _=!1,M=p_;M!==null;){if(h!==0){var W=M.pendingLanes;if(W===0)var ee=0;else{var Se=M.suspendedLanes,He=M.pingedLanes;ee=(1<<31-qe(42|h)+1)-1,ee&=W&~(Se&~He),ee=ee&201326741?ee&201326741|1:ee?ee|2:0}ee!==0&&(_=!0,GH(M,ee))}else ee=kr,ee=Ne(M,M===hn?ee:0,M.cancelPendingCommit!==null||M.timeoutHandle!==-1),(ee&3)===0||Oe(M,ee)||(_=!0,GH(M,ee));M=M.next}while(_);DM=!1}}function Sue(){UH()}function UH(){h_=EM=!1;var h=0;Op!==0&&Due()&&(h=Op);for(var w=z(),_=null,M=p_;M!==null;){var W=M.next,ee=HH(M,w);ee===0?(M.next=null,_===null?p_=W:_.next=W,W===null&&(Yb=_)):(_=M,(h!==0||(ee&3)!==0)&&(h_=!0)),M=W}Ii!==0&&Ii!==5||Yv(h),Op!==0&&(Op=0)}function HH(h,w){for(var _=h.suspendedLanes,M=h.pingedLanes,W=h.expirationTimes,ee=h.pendingLanes&-62914561;0<ee;){var Se=31-qe(ee),He=1<<Se,pt=W[Se];pt===-1?((He&_)===0||(He&M)!==0)&&(W[Se]=Ze(He,w)):pt<=w&&(h.expiredLanes|=He),ee&=~He}if(w=hn,_=kr,_=Ne(h,h===w?_:0,h.cancelPendingCommit!==null||h.timeoutHandle!==-1),M=h.callbackNode,_===0||h===w&&(Vr===2||Vr===9)||h.cancelPendingCommit!==null)return M!==null&&M!==null&&ce(M),h.callbackNode=null,h.callbackPriority=0;if((_&3)===0||Oe(h,_)){if(w=_&-_,w===h.callbackPriority)return w;switch(M!==null&&ce(M),Zt(_)){case 2:case 8:_=be;break;case 32:_=ve;break;case 268435456:_=Ee;break;default:_=ve}return M=qH.bind(null,h),_=he(_,M),h.callbackPriority=w,h.callbackNode=_,w}return M!==null&&M!==null&&ce(M),h.callbackPriority=2,h.callbackNode=null,2}function qH(h,w){if(Ii!==0&&Ii!==5)return h.callbackNode=null,h.callbackPriority=0,null;var _=h.callbackNode;if(m_()&&h.callbackNode!==_)return null;var M=kr;return M=Ne(h,h===hn?M:0,h.cancelPendingCommit!==null||h.timeoutHandle!==-1),M===0?null:(_H(h,M,w),HH(h,z()),h.callbackNode!=null&&h.callbackNode===_?qH.bind(null,h):null)}function GH(h,w){if(m_())return null;_H(h,w,!0)}function kue(){Lue(function(){(Br&6)!==0?he(ge,Sue):UH()})}function FM(){if(Op===0){var h=Fb;h===0&&(h=at,at<<=1,(at&261888)===0&&(at=256)),Op=h}return Op}function $H(h){return h==null||typeof h=="symbol"||typeof h=="boolean"?null:typeof h=="function"?h:dr(""+h)}function VH(h,w){var _=w.ownerDocument.createElement("input");return _.name=w.name,_.value=w.value,h.id&&_.setAttribute("form",h.id),w.parentNode.insertBefore(_,w),h=new FormData(h),_.parentNode.removeChild(_),h}function _ue(h,w,_,M,W){if(w==="submit"&&_&&_.stateNode===W){var ee=$H((W[Pt]||null).action),Se=M.submitter;Se&&(w=(w=Se[Pt]||null)?$H(w.formAction):Se.getAttribute("formAction"),w!==null&&(ee=w,Se=null));var He=new Mo("action","action",null,M,W);h.push({event:He,listeners:[{instance:null,listener:function(){if(M.defaultPrevented){if(Op!==0){var pt=Se?VH(W,Se):new FormData(W);eM(_,{pending:!0,data:pt,method:W.method,action:ee},null,pt)}}else typeof ee=="function"&&(He.preventDefault(),pt=Se?VH(W,Se):new FormData(W),eM(_,{pending:!0,data:pt,method:W.method,action:ee},ee,pt))},currentTarget:W}]})}}for(var LM=0;LM<bj.length;LM++){var RM=bj[LM],Pue=RM.toLowerCase(),Cue=RM[0].toUpperCase()+RM.slice(1);$c(Pue,"on"+Cue)}$c(Nk,"onAnimationEnd"),$c(Tk,"onAnimationIteration"),$c(P5,"onAnimationStart"),$c("dblclick","onDoubleClick"),$c("focusin","onFocus"),$c("focusout","onBlur"),$c(Hde,"onTransitionRun"),$c(qde,"onTransitionStart"),$c(Gde,"onTransitionCancel"),$c(C5,"onTransitionEnd"),Be("onMouseEnter",["mouseout","mouseover"]),Be("onMouseLeave",["mouseout","mouseover"]),Be("onPointerEnter",["pointerout","pointerover"]),Be("onPointerLeave",["pointerout","pointerover"]),_t("onChange","change click focusin focusout input keydown keyup selectionchange".split(" ")),_t("onSelect","focusout contextmenu dragend focusin keydown keyup mousedown mouseup selectionchange".split(" ")),_t("onBeforeInput",["compositionend","keypress","textInput","paste"]),_t("onCompositionEnd","compositionend focusout keydown keypress keyup mousedown".split(" ")),_t("onCompositionStart","compositionstart focusout keydown keypress keyup mousedown".split(" ")),_t("onCompositionUpdate","compositionupdate focusout keydown keypress keyup mousedown".split(" "));var Qv="abort canplay canplaythrough durationchange emptied encrypted ended error loadeddata loadedmetadata loadstart pause play playing progress ratechange resize seeked seeking stalled suspend timeupdate volumechange waiting".split(" "),Nue=new Set("beforetoggle cancel close invalid load scroll scrollend toggle".split(" ").concat(Qv));function WH(h,w){w=(w&4)!==0;for(var _=0;_<h.length;_++){var M=h[_],W=M.event;M=M.listeners;e:{var ee=void 0;if(w)for(var Se=M.length-1;0<=Se;Se--){var He=M[Se],pt=He.instance,Et=He.currentTarget;if(He=He.listener,pt!==ee&&W.isPropagationStopped())break e;ee=He,W.currentTarget=Et;try{ee(W)}catch(qt){Ak(qt)}W.currentTarget=null,ee=pt}else for(Se=0;Se<M.length;Se++){if(He=M[Se],pt=He.instance,Et=He.currentTarget,He=He.listener,pt!==ee&&W.isPropagationStopped())break e;ee=He,W.currentTarget=Et;try{ee(W)}catch(qt){Ak(qt)}W.currentTarget=null,ee=pt}}}}function wr(h,w){var _=w[It];_===void 0&&(_=w[It]=new Set);var M=h+"__bubble";_.has(M)||(KH(w,h,2,!1),_.add(M))}function zM(h,w,_){var M=0;w&&(M|=4),KH(_,h,M,w)}var f_="_reactListening"+Math.random().toString(36).slice(2);function IM(h){if(!h[f_]){h[f_]=!0,Je.forEach(function(_){_!=="selectionchange"&&(Nue.has(_)||zM(_,!1,h),zM(_,!0,h))});var w=h.nodeType===9?h:h.ownerDocument;w===null||w[f_]||(w[f_]=!0,zM("selectionchange",!1,w))}}function KH(h,w,_,M){switch(kq(w)){case 2:var W=tme;break;case 8:W=ame;break;default:W=JM}_=W.bind(null,w,_,h),W=void 0,!bp||w!=="touchstart"&&w!=="touchmove"&&w!=="wheel"||(W=!0),M?W!==void 0?h.addEventListener(w,_,{capture:!0,passive:W}):h.addEventListener(w,_,!0):W!==void 0?h.addEventListener(w,_,{passive:W}):h.addEventListener(w,_,!1)}function OM(h,w,_,M,W){var ee=M;if((w&1)===0&&(w&2)===0&&M!==null)e:for(;;){if(M===null)return;var Se=M.tag;if(Se===3||Se===4){var He=M.stateNode.containerInfo;if(He===W)break;if(Se===4)for(Se=M.return;Se!==null;){var pt=Se.tag;if((pt===3||pt===4)&&Se.stateNode.containerInfo===W)return;Se=Se.return}for(;He!==null;){if(Se=lt(He),Se===null)return;if(pt=Se.tag,pt===5||pt===6||pt===26||pt===27){M=ee=Se;continue e}He=He.parentNode}}M=M.return}gp(function(){var Et=ee,qt=mn(_),Wt=[];e:{var Lt=N5.get(h);if(Lt!==void 0){var Bt=Mo,wa=h;switch(h){case"keypress":if(xp(_)===0)break e;case"keydown":case"keyup":Bt=nl;break;case"focusin":wa="focus",Bt=yp;break;case"focusout":wa="blur",Bt=yp;break;case"beforeblur":case"afterblur":Bt=yp;break;case"click":if(_.button===2)break e;case"auxclick":case"dblclick":case"mousedown":case"mousemove":case"mouseup":case"mouseout":case"mouseover":case"contextmenu":Bt=rl;break;case"drag":case"dragend":case"dragenter":case"dragexit":case"dragleave":case"dragover":case"dragstart":case"drop":Bt=_v;break;case"touchcancel":case"touchend":case"touchmove":case"touchstart":Bt=Ru;break;case Nk:case Tk:case P5:Bt=Fu;break;case C5:Bt=Pb;break;case"scroll":case"scrollend":Bt=Oc;break;case"wheel":Bt=Sf;break;case"copy":case"cut":case"paste":Bt=Bl;break;case"gotpointercapture":case"lostpointercapture":case"pointercancel":case"pointerdown":case"pointermove":case"pointerout":case"pointerover":case"pointerup":Bt=Uc;break;case"toggle":case"beforetoggle":Bt=Cb}var za=(w&4)!==0,an=!za&&(h==="scroll"||h==="scrollend"),kt=za?Lt!==null?Lt+"Capture":null:Lt;za=[];for(var xt=Et,Mt;xt!==null;){var $t=xt;if(Mt=$t.stateNode,$t=$t.tag,$t!==5&&$t!==26&&$t!==27||Mt===null||kt===null||($t=zc(xt,kt),$t!=null&&za.push(Xv(xt,$t,Mt))),an)break;xt=xt.return}0<za.length&&(Lt=new Bt(Lt,wa,null,_,qt),Wt.push({event:Lt,listeners:za}))}}if((w&7)===0){e:{if(Lt=h==="mouseover"||h==="pointerover",Bt=h==="mouseout"||h==="pointerout",Lt&&_!==Ll&&(wa=_.relatedTarget||_.fromElement)&&(lt(wa)||wa[Tt]))break e;if((Bt||Lt)&&(Lt=qt.window===qt?qt:(Lt=qt.ownerDocument)?Lt.defaultView||Lt.parentWindow:window,Bt?(wa=_.relatedTarget||_.toElement,Bt=Et,wa=wa?lt(wa):null,wa!==null&&(an=s(wa),za=wa.tag,wa!==an||za!==5&&za!==27&&za!==6)&&(wa=null)):(Bt=null,wa=Et),Bt!==wa)){if(za=rl,$t="onMouseLeave",kt="onMouseEnter",xt="mouse",(h==="pointerout"||h==="pointerover")&&(za=Uc,$t="onPointerLeave",kt="onPointerEnter",xt="pointer"),an=Bt==null?Lt:Ge(Bt),Mt=wa==null?Lt:Ge(wa),Lt=new za($t,xt+"leave",Bt,_,qt),Lt.target=an,Lt.relatedTarget=Mt,$t=null,lt(qt)===Et&&(za=new za(kt,xt+"enter",wa,_,qt),za.target=Mt,za.relatedTarget=an,$t=za),an=$t,Bt&&wa)t:{for(za=Tue,kt=Bt,xt=wa,Mt=0,$t=kt;$t;$t=za($t))Mt++;$t=0;for(var Da=xt;Da;Da=za(Da))$t++;for(;0<Mt-$t;)kt=za(kt),Mt--;for(;0<$t-Mt;)xt=za(xt),$t--;for(;Mt--;){if(kt===xt||xt!==null&&kt===xt.alternate){za=kt;break t}kt=za(kt),xt=za(xt)}za=null}else za=null;Bt!==null&&YH(Wt,Lt,Bt,za,!1),wa!==null&&an!==null&&YH(Wt,an,wa,za,!0)}}e:{if(Lt=Et?Ge(Et):window,Bt=Lt.nodeName&&Lt.nodeName.toLowerCase(),Bt==="select"||Bt==="input"&&Lt.type==="file")var Fr=pn;else if(Ht(Lt))if(jn)Fr=$r;else{Fr=qc;var Ca=Hc}else Bt=Lt.nodeName,!Bt||Bt.toLowerCase()!=="input"||Lt.type!=="checkbox"&&Lt.type!=="radio"?Et&&Fl(Et.elementType)&&(Fr=pn):Fr=Iu;if(Fr&&(Fr=Fr(h,Et))){Qt(Wt,Fr,_,qt);break e}Ca&&Ca(h,Lt,Et),h==="focusout"&&Et&&Lt.type==="number"&&Et.memoizedProps.value!=null&&un(Lt,"number",Lt.value)}switch(Ca=Et?Ge(Et):window,h){case"focusin":(Ht(Ca)||Ca.contentEditable==="true")&&(mi=Ca,fr=Et,Er=null);break;case"focusout":Er=fr=mi=null;break;case"mousedown":Qn=!0;break;case"contextmenu":case"mouseup":case"dragend":Qn=!1,kp(Wt,_,qt);break;case"selectionchange":if(Md)break;case"keydown":case"keyup":kp(Wt,_,qt)}var tr;if(il)e:{switch(h){case"compositionstart":var _r="onCompositionStart";break e;case"compositionend":_r="onCompositionEnd";break e;case"compositionupdate":_r="onCompositionUpdate";break e}_r=void 0}else la?ye(h,_)&&(_r="onCompositionEnd"):h==="keydown"&&_.keyCode===229&&(_r="onCompositionStart");_r&&(zu&&_.locale!=="ko"&&(la||_r!=="onCompositionStart"?_r==="onCompositionEnd"&&la&&(tr=vf()):(li=qt,Eu="value"in li?li.value:li.textContent,la=!0)),Ca=g_(Et,_r),0<Ca.length&&(_r=new Hl(_r,h,null,_,qt),Wt.push({event:_r,listeners:Ca}),tr?_r.data=tr:(tr=Ot(_),tr!==null&&(_r.data=tr)))),(tr=Hs?Ta(h,_):Ha(h,_))&&(_r=g_(Et,"onBeforeInput"),0<_r.length&&(Ca=new Hl("onBeforeInput","beforeinput",null,_,qt),Wt.push({event:Ca,listeners:_r}),Ca.data=tr)),_ue(Wt,h,Et,_,qt)}WH(Wt,w)})}function Xv(h,w,_){return{instance:h,listener:w,currentTarget:_}}function g_(h,w){for(var _=w+"Capture",M=[];h!==null;){var W=h,ee=W.stateNode;if(W=W.tag,W!==5&&W!==26&&W!==27||ee===null||(W=zc(h,_),W!=null&&M.unshift(Xv(h,W,ee)),W=zc(h,w),W!=null&&M.push(Xv(h,W,ee))),h.tag===3)return M;h=h.return}return[]}function Tue(h){if(h===null)return null;do h=h.return;while(h&&h.tag!==5&&h.tag!==27);return h||null}function YH(h,w,_,M,W){for(var ee=w._reactName,Se=[];_!==null&&_!==M;){var He=_,pt=He.alternate,Et=He.stateNode;if(He=He.tag,pt!==null&&pt===M)break;He!==5&&He!==26&&He!==27||Et===null||(pt=Et,W?(Et=zc(_,ee),Et!=null&&Se.unshift(Xv(_,Et,pt))):W||(Et=zc(_,ee),Et!=null&&Se.push(Xv(_,Et,pt)))),_=_.return}Se.length!==0&&h.push({event:w,listeners:Se})}var Aue=/\r\n?/g,jue=/\u0000|\uFFFD/g;function QH(h){return(typeof h=="string"?h:""+h).replace(Aue,`
-`).replace(jue,"")}function XH(h,w){return w=QH(w),QH(h)===w}function tn(h,w,_,M,W,ee){switch(_){case"children":typeof M=="string"?w==="body"||w==="textarea"&&M===""||yi(h,M):(typeof M=="number"||typeof M=="bigint")&&w!=="body"&&yi(h,""+M);break;case"className":Ve(h,"class",M);break;case"tabIndex":Ve(h,"tabindex",M);break;case"dir":case"role":case"viewBox":case"width":case"height":Ve(h,_,M);break;case"style":Pd(h,M,ee);break;case"data":if(w!=="object"){Ve(h,"data",M);break}case"src":case"href":if(M===""&&(w!=="a"||_!=="href")){h.removeAttribute(_);break}if(M==null||typeof M=="function"||typeof M=="symbol"||typeof M=="boolean"){h.removeAttribute(_);break}M=dr(""+M),h.setAttribute(_,M);break;case"action":case"formAction":if(typeof M=="function"){h.setAttribute(_,"javascript:throw new Error('A React form was unexpectedly submitted. If you called form.submit() manually, consider using form.requestSubmit() instead. If you\\'re trying to use event.stopPropagation() in a submit event handler, consider also calling event.preventDefault().')");break}else typeof ee=="function"&&(_==="formAction"?(w!=="input"&&tn(h,w,"name",W.name,W,null),tn(h,w,"formEncType",W.formEncType,W,null),tn(h,w,"formMethod",W.formMethod,W,null),tn(h,w,"formTarget",W.formTarget,W,null)):(tn(h,w,"encType",W.encType,W,null),tn(h,w,"method",W.method,W,null),tn(h,w,"target",W.target,W,null)));if(M==null||typeof M=="symbol"||typeof M=="boolean"){h.removeAttribute(_);break}M=dr(""+M),h.setAttribute(_,M);break;case"onClick":M!=null&&(h.onclick=Kt);break;case"onScroll":M!=null&&wr("scroll",h);break;case"onScrollEnd":M!=null&&wr("scrollend",h);break;case"dangerouslySetInnerHTML":if(M!=null){if(typeof M!="object"||!("__html"in M))throw Error(n(61));if(_=M.__html,_!=null){if(W.children!=null)throw Error(n(60));h.innerHTML=_}}break;case"multiple":h.multiple=M&&typeof M!="function"&&typeof M!="symbol";break;case"muted":h.muted=M&&typeof M!="function"&&typeof M!="symbol";break;case"suppressContentEditableWarning":case"suppressHydrationWarning":case"defaultValue":case"defaultChecked":case"innerHTML":case"ref":break;case"autoFocus":break;case"xlinkHref":if(M==null||typeof M=="function"||typeof M=="boolean"||typeof M=="symbol"){h.removeAttribute("xlink:href");break}_=dr(""+M),h.setAttributeNS("http://www.w3.org/1999/xlink","xlink:href",_);break;case"contentEditable":case"spellCheck":case"draggable":case"value":case"autoReverse":case"externalResourcesRequired":case"focusable":case"preserveAlpha":M!=null&&typeof M!="function"&&typeof M!="symbol"?h.setAttribute(_,""+M):h.removeAttribute(_);break;case"inert":case"allowFullScreen":case"async":case"autoPlay":case"controls":case"default":case"defer":case"disabled":case"disablePictureInPicture":case"disableRemotePlayback":case"formNoValidate":case"hidden":case"loop":case"noModule":case"noValidate":case"open":case"playsInline":case"readOnly":case"required":case"reversed":case"scoped":case"seamless":case"itemScope":M&&typeof M!="function"&&typeof M!="symbol"?h.setAttribute(_,""):h.removeAttribute(_);break;case"capture":case"download":M===!0?h.setAttribute(_,""):M!==!1&&M!=null&&typeof M!="function"&&typeof M!="symbol"?h.setAttribute(_,M):h.removeAttribute(_);break;case"cols":case"rows":case"size":case"span":M!=null&&typeof M!="function"&&typeof M!="symbol"&&!isNaN(M)&&1<=M?h.setAttribute(_,M):h.removeAttribute(_);break;case"rowSpan":case"start":M==null||typeof M=="function"||typeof M=="symbol"||isNaN(M)?h.removeAttribute(_):h.setAttribute(_,M);break;case"popover":wr("beforetoggle",h),wr("toggle",h),Ye(h,"popover",M);break;case"xlinkActuate":Yt(h,"http://www.w3.org/1999/xlink","xlink:actuate",M);break;case"xlinkArcrole":Yt(h,"http://www.w3.org/1999/xlink","xlink:arcrole",M);break;case"xlinkRole":Yt(h,"http://www.w3.org/1999/xlink","xlink:role",M);break;case"xlinkShow":Yt(h,"http://www.w3.org/1999/xlink","xlink:show",M);break;case"xlinkTitle":Yt(h,"http://www.w3.org/1999/xlink","xlink:title",M);break;case"xlinkType":Yt(h,"http://www.w3.org/1999/xlink","xlink:type",M);break;case"xmlBase":Yt(h,"http://www.w3.org/XML/1998/namespace","xml:base",M);break;case"xmlLang":Yt(h,"http://www.w3.org/XML/1998/namespace","xml:lang",M);break;case"xmlSpace":Yt(h,"http://www.w3.org/XML/1998/namespace","xml:space",M);break;case"is":Ye(h,"is",M);break;case"innerText":case"textContent":break;default:(!(2<_.length)||_[0]!=="o"&&_[0]!=="O"||_[1]!=="n"&&_[1]!=="N")&&(_=zt.get(_)||_,Ye(h,_,M))}}function BM(h,w,_,M,W,ee){switch(_){case"style":Pd(h,M,ee);break;case"dangerouslySetInnerHTML":if(M!=null){if(typeof M!="object"||!("__html"in M))throw Error(n(61));if(_=M.__html,_!=null){if(W.children!=null)throw Error(n(60));h.innerHTML=_}}break;case"children":typeof M=="string"?yi(h,M):(typeof M=="number"||typeof M=="bigint")&&yi(h,""+M);break;case"onScroll":M!=null&&wr("scroll",h);break;case"onScrollEnd":M!=null&&wr("scrollend",h);break;case"onClick":M!=null&&(h.onclick=Kt);break;case"suppressContentEditableWarning":case"suppressHydrationWarning":case"innerHTML":case"ref":break;case"innerText":case"textContent":break;default:if(!St.hasOwnProperty(_))e:{if(_[0]==="o"&&_[1]==="n"&&(W=_.endsWith("Capture"),w=_.slice(2,W?_.length-7:void 0),ee=h[Pt]||null,ee=ee!=null?ee[_]:null,typeof ee=="function"&&h.removeEventListener(w,ee,W),typeof M=="function")){typeof ee!="function"&&ee!==null&&(_ in h?h[_]=null:h.hasAttribute(_)&&h.removeAttribute(_)),h.addEventListener(w,M,W);break e}_ in h?h[_]=M:M===!0?h.setAttribute(_,""):Ye(h,_,M)}}}function _s(h,w,_){switch(w){case"div":case"span":case"svg":case"path":case"a":case"g":case"p":case"li":break;case"img":wr("error",h),wr("load",h);var M=!1,W=!1,ee;for(ee in _)if(_.hasOwnProperty(ee)){var Se=_[ee];if(Se!=null)switch(ee){case"src":M=!0;break;case"srcSet":W=!0;break;case"children":case"dangerouslySetInnerHTML":throw Error(n(137,w));default:tn(h,w,ee,Se,_,null)}}W&&tn(h,w,"srcSet",_.srcSet,_,null),M&&tn(h,w,"src",_.src,_,null);return;case"input":wr("invalid",h);var He=ee=Se=W=null,pt=null,Et=null;for(M in _)if(_.hasOwnProperty(M)){var qt=_[M];if(qt!=null)switch(M){case"name":W=qt;break;case"type":Se=qt;break;case"checked":pt=qt;break;case"defaultChecked":Et=qt;break;case"value":ee=qt;break;case"defaultValue":He=qt;break;case"children":case"dangerouslySetInnerHTML":if(qt!=null)throw Error(n(137,w));break;default:tn(h,w,M,qt,_,null)}}Ua(h,ee,He,pt,Et,Se,W,!1);return;case"select":wr("invalid",h),M=Se=ee=null;for(W in _)if(_.hasOwnProperty(W)&&(He=_[W],He!=null))switch(W){case"value":ee=He;break;case"defaultValue":Se=He;break;case"multiple":M=He;default:tn(h,w,W,He,_,null)}w=ee,_=Se,h.multiple=!!M,w!=null?Mr(h,!!M,w,!1):_!=null&&Mr(h,!!M,_,!0);return;case"textarea":wr("invalid",h),ee=W=M=null;for(Se in _)if(_.hasOwnProperty(Se)&&(He=_[Se],He!=null))switch(Se){case"value":M=He;break;case"defaultValue":W=He;break;case"children":ee=He;break;case"dangerouslySetInnerHTML":if(He!=null)throw Error(n(91));break;default:tn(h,w,Se,He,_,null)}yn(h,M,W,ee);return;case"option":for(pt in _)_.hasOwnProperty(pt)&&(M=_[pt],M!=null)&&(pt==="selected"?h.selected=M&&typeof M!="function"&&typeof M!="symbol":tn(h,w,pt,M,_,null));return;case"dialog":wr("beforetoggle",h),wr("toggle",h),wr("cancel",h),wr("close",h);break;case"iframe":case"object":wr("load",h);break;case"video":case"audio":for(M=0;M<Qv.length;M++)wr(Qv[M],h);break;case"image":wr("error",h),wr("load",h);break;case"details":wr("toggle",h);break;case"embed":case"source":case"link":wr("error",h),wr("load",h);case"area":case"base":case"br":case"col":case"hr":case"keygen":case"meta":case"param":case"track":case"wbr":case"menuitem":for(Et in _)if(_.hasOwnProperty(Et)&&(M=_[Et],M!=null))switch(Et){case"children":case"dangerouslySetInnerHTML":throw Error(n(137,w));default:tn(h,w,Et,M,_,null)}return;default:if(Fl(w)){for(qt in _)_.hasOwnProperty(qt)&&(M=_[qt],M!==void 0&&BM(h,w,qt,M,_,void 0));return}}for(He in _)_.hasOwnProperty(He)&&(M=_[He],M!=null&&tn(h,w,He,M,_,null))}function Mue(h,w,_,M){switch(w){case"div":case"span":case"svg":case"path":case"a":case"g":case"p":case"li":break;case"input":var W=null,ee=null,Se=null,He=null,pt=null,Et=null,qt=null;for(Bt in _){var Wt=_[Bt];if(_.hasOwnProperty(Bt)&&Wt!=null)switch(Bt){case"checked":break;case"value":break;case"defaultValue":pt=Wt;default:M.hasOwnProperty(Bt)||tn(h,w,Bt,null,M,Wt)}}for(var Lt in M){var Bt=M[Lt];if(Wt=_[Lt],M.hasOwnProperty(Lt)&&(Bt!=null||Wt!=null))switch(Lt){case"type":ee=Bt;break;case"name":W=Bt;break;case"checked":Et=Bt;break;case"defaultChecked":qt=Bt;break;case"value":Se=Bt;break;case"defaultValue":He=Bt;break;case"children":case"dangerouslySetInnerHTML":if(Bt!=null)throw Error(n(137,w));break;default:Bt!==Wt&&tn(h,w,Lt,Bt,M,Wt)}}Un(h,Se,He,pt,Et,qt,ee,W);return;case"select":Bt=Se=He=Lt=null;for(ee in _)if(pt=_[ee],_.hasOwnProperty(ee)&&pt!=null)switch(ee){case"value":break;case"multiple":Bt=pt;default:M.hasOwnProperty(ee)||tn(h,w,ee,null,M,pt)}for(W in M)if(ee=M[W],pt=_[W],M.hasOwnProperty(W)&&(ee!=null||pt!=null))switch(W){case"value":Lt=ee;break;case"defaultValue":He=ee;break;case"multiple":Se=ee;default:ee!==pt&&tn(h,w,W,ee,M,pt)}w=He,_=Se,M=Bt,Lt!=null?Mr(h,!!_,Lt,!1):!!M!=!!_&&(w!=null?Mr(h,!!_,w,!0):Mr(h,!!_,_?[]:"",!1));return;case"textarea":Bt=Lt=null;for(He in _)if(W=_[He],_.hasOwnProperty(He)&&W!=null&&!M.hasOwnProperty(He))switch(He){case"value":break;case"children":break;default:tn(h,w,He,null,M,W)}for(Se in M)if(W=M[Se],ee=_[Se],M.hasOwnProperty(Se)&&(W!=null||ee!=null))switch(Se){case"value":Lt=W;break;case"defaultValue":Bt=W;break;case"children":break;case"dangerouslySetInnerHTML":if(W!=null)throw Error(n(91));break;default:W!==ee&&tn(h,w,Se,W,M,ee)}cr(h,Lt,Bt);return;case"option":for(var wa in _)Lt=_[wa],_.hasOwnProperty(wa)&&Lt!=null&&!M.hasOwnProperty(wa)&&(wa==="selected"?h.selected=!1:tn(h,w,wa,null,M,Lt));for(pt in M)Lt=M[pt],Bt=_[pt],M.hasOwnProperty(pt)&&Lt!==Bt&&(Lt!=null||Bt!=null)&&(pt==="selected"?h.selected=Lt&&typeof Lt!="function"&&typeof Lt!="symbol":tn(h,w,pt,Lt,M,Bt));return;case"img":case"link":case"area":case"base":case"br":case"col":case"embed":case"hr":case"keygen":case"meta":case"param":case"source":case"track":case"wbr":case"menuitem":for(var za in _)Lt=_[za],_.hasOwnProperty(za)&&Lt!=null&&!M.hasOwnProperty(za)&&tn(h,w,za,null,M,Lt);for(Et in M)if(Lt=M[Et],Bt=_[Et],M.hasOwnProperty(Et)&&Lt!==Bt&&(Lt!=null||Bt!=null))switch(Et){case"children":case"dangerouslySetInnerHTML":if(Lt!=null)throw Error(n(137,w));break;default:tn(h,w,Et,Lt,M,Bt)}return;default:if(Fl(w)){for(var an in _)Lt=_[an],_.hasOwnProperty(an)&&Lt!==void 0&&!M.hasOwnProperty(an)&&BM(h,w,an,void 0,M,Lt);for(qt in M)Lt=M[qt],Bt=_[qt],!M.hasOwnProperty(qt)||Lt===Bt||Lt===void 0&&Bt===void 0||BM(h,w,qt,Lt,M,Bt);return}}for(var kt in _)Lt=_[kt],_.hasOwnProperty(kt)&&Lt!=null&&!M.hasOwnProperty(kt)&&tn(h,w,kt,null,M,Lt);for(Wt in M)Lt=M[Wt],Bt=_[Wt],!M.hasOwnProperty(Wt)||Lt===Bt||Lt==null&&Bt==null||tn(h,w,Wt,Lt,M,Bt)}function ZH(h){switch(h){case"css":case"script":case"font":case"img":case"image":case"input":case"link":return!0;default:return!1}}function Eue(){if(typeof performance.getEntriesByType=="function"){for(var h=0,w=0,_=performance.getEntriesByType("resource"),M=0;M<_.length;M++){var W=_[M],ee=W.transferSize,Se=W.initiatorType,He=W.duration;if(ee&&He&&ZH(Se)){for(Se=0,He=W.responseEnd,M+=1;M<_.length;M++){var pt=_[M],Et=pt.startTime;if(Et>He)break;var qt=pt.transferSize,Wt=pt.initiatorType;qt&&ZH(Wt)&&(pt=pt.responseEnd,Se+=qt*(pt<He?1:(He-Et)/(pt-Et)))}if(--M,w+=8*(ee+Se)/(W.duration/1e3),h++,10<h)break}}if(0<h)return w/h/1e6}return navigator.connection&&(h=navigator.connection.downlink,typeof h=="number")?h:5}var UM=null,HM=null;function b_(h){return h.nodeType===9?h:h.ownerDocument}function JH(h){switch(h){case"http://www.w3.org/2000/svg":return 1;case"http://www.w3.org/1998/Math/MathML":return 2;default:return 0}}function eq(h,w){if(h===0)switch(w){case"svg":return 1;case"math":return 2;default:return 0}return h===1&&w==="foreignObject"?0:h}function qM(h,w){return h==="textarea"||h==="noscript"||typeof w.children=="string"||typeof w.children=="number"||typeof w.children=="bigint"||typeof w.dangerouslySetInnerHTML=="object"&&w.dangerouslySetInnerHTML!==null&&w.dangerouslySetInnerHTML.__html!=null}var GM=null;function Due(){var h=window.event;return h&&h.type==="popstate"?h===GM?!1:(GM=h,!0):(GM=null,!1)}var tq=typeof setTimeout=="function"?setTimeout:void 0,Fue=typeof clearTimeout=="function"?clearTimeout:void 0,aq=typeof Promise=="function"?Promise:void 0,Lue=typeof queueMicrotask=="function"?queueMicrotask:typeof aq<"u"?function(h){return aq.resolve(null).then(h).catch(Rue)}:tq;function Rue(h){setTimeout(function(){throw h})}function Bp(h){return h==="head"}function rq(h,w){var _=w,M=0;do{var W=_.nextSibling;if(h.removeChild(_),W&&W.nodeType===8)if(_=W.data,_==="/$"||_==="/&"){if(M===0){h.removeChild(W),Jb(w);return}M--}else if(_==="$"||_==="$?"||_==="$~"||_==="$!"||_==="&")M++;else if(_==="html")Zv(h.ownerDocument.documentElement);else if(_==="head"){_=h.ownerDocument.head,Zv(_);for(var ee=_.firstChild;ee;){var Se=ee.nextSibling,He=ee.nodeName;ee[Te]||He==="SCRIPT"||He==="STYLE"||He==="LINK"&&ee.rel.toLowerCase()==="stylesheet"||_.removeChild(ee),ee=Se}}else _==="body"&&Zv(h.ownerDocument.body);_=W}while(_);Jb(w)}function nq(h,w){var _=h;h=0;do{var M=_.nextSibling;if(_.nodeType===1?w?(_._stashedDisplay=_.style.display,_.style.display="none"):(_.style.display=_._stashedDisplay||"",_.getAttribute("style")===""&&_.removeAttribute("style")):_.nodeType===3&&(w?(_._stashedText=_.nodeValue,_.nodeValue=""):_.nodeValue=_._stashedText||""),M&&M.nodeType===8)if(_=M.data,_==="/$"){if(h===0)break;h--}else _!=="$"&&_!=="$?"&&_!=="$~"&&_!=="$!"||h++;_=M}while(_)}function $M(h){var w=h.firstChild;for(w&&w.nodeType===10&&(w=w.nextSibling);w;){var _=w;switch(w=w.nextSibling,_.nodeName){case"HTML":case"HEAD":case"BODY":$M(_),_e(_);continue;case"SCRIPT":case"STYLE":continue;case"LINK":if(_.rel.toLowerCase()==="stylesheet")continue}h.removeChild(_)}}function zue(h,w,_,M){for(;h.nodeType===1;){var W=_;if(h.nodeName.toLowerCase()!==w.toLowerCase()){if(!M&&(h.nodeName!=="INPUT"||h.type!=="hidden"))break}else if(M){if(!h[Te])switch(w){case"meta":if(!h.hasAttribute("itemprop"))break;return h;case"link":if(ee=h.getAttribute("rel"),ee==="stylesheet"&&h.hasAttribute("data-precedence"))break;if(ee!==W.rel||h.getAttribute("href")!==(W.href==null||W.href===""?null:W.href)||h.getAttribute("crossorigin")!==(W.crossOrigin==null?null:W.crossOrigin)||h.getAttribute("title")!==(W.title==null?null:W.title))break;return h;case"style":if(h.hasAttribute("data-precedence"))break;return h;case"script":if(ee=h.getAttribute("src"),(ee!==(W.src==null?null:W.src)||h.getAttribute("type")!==(W.type==null?null:W.type)||h.getAttribute("crossorigin")!==(W.crossOrigin==null?null:W.crossOrigin))&&ee&&h.hasAttribute("async")&&!h.hasAttribute("itemprop"))break;return h;default:return h}}else if(w==="input"&&h.type==="hidden"){var ee=W.name==null?null:""+W.name;if(W.type==="hidden"&&h.getAttribute("name")===ee)return h}else return h;if(h=Ql(h.nextSibling),h===null)break}return null}function Iue(h,w,_){if(w==="")return null;for(;h.nodeType!==3;)if((h.nodeType!==1||h.nodeName!=="INPUT"||h.type!=="hidden")&&!_||(h=Ql(h.nextSibling),h===null))return null;return h}function iq(h,w){for(;h.nodeType!==8;)if((h.nodeType!==1||h.nodeName!=="INPUT"||h.type!=="hidden")&&!w||(h=Ql(h.nextSibling),h===null))return null;return h}function VM(h){return h.data==="$?"||h.data==="$~"}function WM(h){return h.data==="$!"||h.data==="$?"&&h.ownerDocument.readyState!=="loading"}function Oue(h,w){var _=h.ownerDocument;if(h.data==="$~")h._reactRetry=w;else if(h.data!=="$?"||_.readyState!=="loading")w();else{var M=function(){w(),_.removeEventListener("DOMContentLoaded",M)};_.addEventListener("DOMContentLoaded",M),h._reactRetry=M}}function Ql(h){for(;h!=null;h=h.nextSibling){var w=h.nodeType;if(w===1||w===3)break;if(w===8){if(w=h.data,w==="$"||w==="$!"||w==="$?"||w==="$~"||w==="&"||w==="F!"||w==="F")break;if(w==="/$"||w==="/&")return null}}return h}var KM=null;function sq(h){h=h.nextSibling;for(var w=0;h;){if(h.nodeType===8){var _=h.data;if(_==="/$"||_==="/&"){if(w===0)return Ql(h.nextSibling);w--}else _!=="$"&&_!=="$!"&&_!=="$?"&&_!=="$~"&&_!=="&"||w++}h=h.nextSibling}return null}function oq(h){h=h.previousSibling;for(var w=0;h;){if(h.nodeType===8){var _=h.data;if(_==="$"||_==="$!"||_==="$?"||_==="$~"||_==="&"){if(w===0)return h;w--}else _!=="/$"&&_!=="/&"||w++}h=h.previousSibling}return null}function lq(h,w,_){switch(w=b_(_),h){case"html":if(h=w.documentElement,!h)throw Error(n(452));return h;case"head":if(h=w.head,!h)throw Error(n(453));return h;case"body":if(h=w.body,!h)throw Error(n(454));return h;default:throw Error(n(451))}}function Zv(h){for(var w=h.attributes;w.length;)h.removeAttributeNode(w[0]);_e(h)}var Xl=new Map,cq=new Set;function x_(h){return typeof h.getRootNode=="function"?h.getRootNode():h.nodeType===9?h:h.ownerDocument}var Ju=J.d;J.d={f:Bue,r:Uue,D:Hue,C:que,L:Gue,m:$ue,X:Wue,S:Vue,M:Kue};function Bue(){var h=Ju.f(),w=c_();return h||w}function Uue(h){var w=we(h);w!==null&&w.tag===5&&w.type==="form"?CU(w):Ju.r(h)}var Qb=typeof document>"u"?null:document;function dq(h,w,_){var M=Qb;if(M&&typeof w=="string"&&w){var W=Oa(w);W='link[rel="'+h+'"][href="'+W+'"]',typeof _=="string"&&(W+='[crossorigin="'+_+'"]'),cq.has(W)||(cq.add(W),h={rel:h,crossOrigin:_,href:w},M.querySelector(W)===null&&(w=M.createElement("link"),_s(w,"link",h),nt(w),M.head.appendChild(w)))}}function Hue(h){Ju.D(h),dq("dns-prefetch",h,null)}function que(h,w){Ju.C(h,w),dq("preconnect",h,w)}function Gue(h,w,_){Ju.L(h,w,_);var M=Qb;if(M&&h&&w){var W='link[rel="preload"][as="'+Oa(w)+'"]';w==="image"&&_&&_.imageSrcSet?(W+='[imagesrcset="'+Oa(_.imageSrcSet)+'"]',typeof _.imageSizes=="string"&&(W+='[imagesizes="'+Oa(_.imageSizes)+'"]')):W+='[href="'+Oa(h)+'"]';var ee=W;switch(w){case"style":ee=Xb(h);break;case"script":ee=Zb(h)}Xl.has(ee)||(h=m({rel:"preload",href:w==="image"&&_&&_.imageSrcSet?void 0:h,as:w},_),Xl.set(ee,h),M.querySelector(W)!==null||w==="style"&&M.querySelector(Jv(ee))||w==="script"&&M.querySelector(e0(ee))||(w=M.createElement("link"),_s(w,"link",h),nt(w),M.head.appendChild(w)))}}function $ue(h,w){Ju.m(h,w);var _=Qb;if(_&&h){var M=w&&typeof w.as=="string"?w.as:"script",W='link[rel="modulepreload"][as="'+Oa(M)+'"][href="'+Oa(h)+'"]',ee=W;switch(M){case"audioworklet":case"paintworklet":case"serviceworker":case"sharedworker":case"worker":case"script":ee=Zb(h)}if(!Xl.has(ee)&&(h=m({rel:"modulepreload",href:h},w),Xl.set(ee,h),_.querySelector(W)===null)){switch(M){case"audioworklet":case"paintworklet":case"serviceworker":case"sharedworker":case"worker":case"script":if(_.querySelector(e0(ee)))return}M=_.createElement("link"),_s(M,"link",h),nt(M),_.head.appendChild(M)}}}function Vue(h,w,_){Ju.S(h,w,_);var M=Qb;if(M&&h){var W=tt(M).hoistableStyles,ee=Xb(h);w=w||"default";var Se=W.get(ee);if(!Se){var He={loading:0,preload:null};if(Se=M.querySelector(Jv(ee)))He.loading=5;else{h=m({rel:"stylesheet",href:h,"data-precedence":w},_),(_=Xl.get(ee))&&YM(h,_);var pt=Se=M.createElement("link");nt(pt),_s(pt,"link",h),pt._p=new Promise(function(Et,qt){pt.onload=Et,pt.onerror=qt}),pt.addEventListener("load",function(){He.loading|=1}),pt.addEventListener("error",function(){He.loading|=2}),He.loading|=4,y_(Se,w,M)}Se={type:"stylesheet",instance:Se,count:1,state:He},W.set(ee,Se)}}}function Wue(h,w){Ju.X(h,w);var _=Qb;if(_&&h){var M=tt(_).hoistableScripts,W=Zb(h),ee=M.get(W);ee||(ee=_.querySelector(e0(W)),ee||(h=m({src:h,async:!0},w),(w=Xl.get(W))&&QM(h,w),ee=_.createElement("script"),nt(ee),_s(ee,"link",h),_.head.appendChild(ee)),ee={type:"script",instance:ee,count:1,state:null},M.set(W,ee))}}function Kue(h,w){Ju.M(h,w);var _=Qb;if(_&&h){var M=tt(_).hoistableScripts,W=Zb(h),ee=M.get(W);ee||(ee=_.querySelector(e0(W)),ee||(h=m({src:h,async:!0,type:"module"},w),(w=Xl.get(W))&&QM(h,w),ee=_.createElement("script"),nt(ee),_s(ee,"link",h),_.head.appendChild(ee)),ee={type:"script",instance:ee,count:1,state:null},M.set(W,ee))}}function uq(h,w,_,M){var W=(W=G.current)?x_(W):null;if(!W)throw Error(n(446));switch(h){case"meta":case"title":return null;case"style":return typeof _.precedence=="string"&&typeof _.href=="string"?(w=Xb(_.href),_=tt(W).hoistableStyles,M=_.get(w),M||(M={type:"style",instance:null,count:0,state:null},_.set(w,M)),M):{type:"void",instance:null,count:0,state:null};case"link":if(_.rel==="stylesheet"&&typeof _.href=="string"&&typeof _.precedence=="string"){h=Xb(_.href);var ee=tt(W).hoistableStyles,Se=ee.get(h);if(Se||(W=W.ownerDocument||W,Se={type:"stylesheet",instance:null,count:0,state:{loading:0,preload:null}},ee.set(h,Se),(ee=W.querySelector(Jv(h)))&&!ee._p&&(Se.instance=ee,Se.state.loading=5),Xl.has(h)||(_={rel:"preload",as:"style",href:_.href,crossOrigin:_.crossOrigin,integrity:_.integrity,media:_.media,hrefLang:_.hrefLang,referrerPolicy:_.referrerPolicy},Xl.set(h,_),ee||Yue(W,h,_,Se.state))),w&&M===null)throw Error(n(528,""));return Se}if(w&&M!==null)throw Error(n(529,""));return null;case"script":return w=_.async,_=_.src,typeof _=="string"&&w&&typeof w!="function"&&typeof w!="symbol"?(w=Zb(_),_=tt(W).hoistableScripts,M=_.get(w),M||(M={type:"script",instance:null,count:0,state:null},_.set(w,M)),M):{type:"void",instance:null,count:0,state:null};default:throw Error(n(444,h))}}function Xb(h){return'href="'+Oa(h)+'"'}function Jv(h){return'link[rel="stylesheet"]['+h+"]"}function mq(h){return m({},h,{"data-precedence":h.precedence,precedence:null})}function Yue(h,w,_,M){h.querySelector('link[rel="preload"][as="style"]['+w+"]")?M.loading=1:(w=h.createElement("link"),M.preload=w,w.addEventListener("load",function(){return M.loading|=1}),w.addEventListener("error",function(){return M.loading|=2}),_s(w,"link",_),nt(w),h.head.appendChild(w))}function Zb(h){return'[src="'+Oa(h)+'"]'}function e0(h){return"script[async]"+h}function pq(h,w,_){if(w.count++,w.instance===null)switch(w.type){case"style":var M=h.querySelector('style[data-href~="'+Oa(_.href)+'"]');if(M)return w.instance=M,nt(M),M;var W=m({},_,{"data-href":_.href,"data-precedence":_.precedence,href:null,precedence:null});return M=(h.ownerDocument||h).createElement("style"),nt(M),_s(M,"style",W),y_(M,_.precedence,h),w.instance=M;case"stylesheet":W=Xb(_.href);var ee=h.querySelector(Jv(W));if(ee)return w.state.loading|=4,w.instance=ee,nt(ee),ee;M=mq(_),(W=Xl.get(W))&&YM(M,W),ee=(h.ownerDocument||h).createElement("link"),nt(ee);var Se=ee;return Se._p=new Promise(function(He,pt){Se.onload=He,Se.onerror=pt}),_s(ee,"link",M),w.state.loading|=4,y_(ee,_.precedence,h),w.instance=ee;case"script":return ee=Zb(_.src),(W=h.querySelector(e0(ee)))?(w.instance=W,nt(W),W):(M=_,(W=Xl.get(ee))&&(M=m({},_),QM(M,W)),h=h.ownerDocument||h,W=h.createElement("script"),nt(W),_s(W,"link",M),h.head.appendChild(W),w.instance=W);case"void":return null;default:throw Error(n(443,w.type))}else w.type==="stylesheet"&&(w.state.loading&4)===0&&(M=w.instance,w.state.loading|=4,y_(M,_.precedence,h));return w.instance}function y_(h,w,_){for(var M=_.querySelectorAll('link[rel="stylesheet"][data-precedence],style[data-precedence]'),W=M.length?M[M.length-1]:null,ee=W,Se=0;Se<M.length;Se++){var He=M[Se];if(He.dataset.precedence===w)ee=He;else if(ee!==W)break}ee?ee.parentNode.insertBefore(h,ee.nextSibling):(w=_.nodeType===9?_.head:_,w.insertBefore(h,w.firstChild))}function YM(h,w){h.crossOrigin==null&&(h.crossOrigin=w.crossOrigin),h.referrerPolicy==null&&(h.referrerPolicy=w.referrerPolicy),h.title==null&&(h.title=w.title)}function QM(h,w){h.crossOrigin==null&&(h.crossOrigin=w.crossOrigin),h.referrerPolicy==null&&(h.referrerPolicy=w.referrerPolicy),h.integrity==null&&(h.integrity=w.integrity)}var v_=null;function hq(h,w,_){if(v_===null){var M=new Map,W=v_=new Map;W.set(_,M)}else W=v_,M=W.get(_),M||(M=new Map,W.set(_,M));if(M.has(h))return M;for(M.set(h,null),_=_.getElementsByTagName(h),W=0;W<_.length;W++){var ee=_[W];if(!(ee[Te]||ee[vt]||h==="link"&&ee.getAttribute("rel")==="stylesheet")&&ee.namespaceURI!=="http://www.w3.org/2000/svg"){var Se=ee.getAttribute(w)||"";Se=h+Se;var He=M.get(Se);He?He.push(ee):M.set(Se,[ee])}}return M}function fq(h,w,_){h=h.ownerDocument||h,h.head.insertBefore(_,w==="title"?h.querySelector("head > title"):null)}function Que(h,w,_){if(_===1||w.itemProp!=null)return!1;switch(h){case"meta":case"title":return!0;case"style":if(typeof w.precedence!="string"||typeof w.href!="string"||w.href==="")break;return!0;case"link":if(typeof w.rel!="string"||typeof w.href!="string"||w.href===""||w.onLoad||w.onError)break;return w.rel==="stylesheet"?(h=w.disabled,typeof w.precedence=="string"&&h==null):!0;case"script":if(w.async&&typeof w.async!="function"&&typeof w.async!="symbol"&&!w.onLoad&&!w.onError&&w.src&&typeof w.src=="string")return!0}return!1}function gq(h){return!(h.type==="stylesheet"&&(h.state.loading&3)===0)}function Xue(h,w,_,M){if(_.type==="stylesheet"&&(typeof M.media!="string"||matchMedia(M.media).matches!==!1)&&(_.state.loading&4)===0){if(_.instance===null){var W=Xb(M.href),ee=w.querySelector(Jv(W));if(ee){w=ee._p,w!==null&&typeof w=="object"&&typeof w.then=="function"&&(h.count++,h=w_.bind(h),w.then(h,h)),_.state.loading|=4,_.instance=ee,nt(ee);return}ee=w.ownerDocument||w,M=mq(M),(W=Xl.get(W))&&YM(M,W),ee=ee.createElement("link"),nt(ee);var Se=ee;Se._p=new Promise(function(He,pt){Se.onload=He,Se.onerror=pt}),_s(ee,"link",M),_.instance=ee}h.stylesheets===null&&(h.stylesheets=new Map),h.stylesheets.set(_,w),(w=_.state.preload)&&(_.state.loading&3)===0&&(h.count++,_=w_.bind(h),w.addEventListener("load",_),w.addEventListener("error",_))}}var XM=0;function Zue(h,w){return h.stylesheets&&h.count===0&&k_(h,h.stylesheets),0<h.count||0<h.imgCount?function(_){var M=setTimeout(function(){if(h.stylesheets&&k_(h,h.stylesheets),h.unsuspend){var ee=h.unsuspend;h.unsuspend=null,ee()}},6e4+w);0<h.imgBytes&&XM===0&&(XM=62500*Eue());var W=setTimeout(function(){if(h.waitingForImages=!1,h.count===0&&(h.stylesheets&&k_(h,h.stylesheets),h.unsuspend)){var ee=h.unsuspend;h.unsuspend=null,ee()}},(h.imgBytes>XM?50:800)+w);return h.unsuspend=_,function(){h.unsuspend=null,clearTimeout(M),clearTimeout(W)}}:null}function w_(){if(this.count--,this.count===0&&(this.imgCount===0||!this.waitingForImages)){if(this.stylesheets)k_(this,this.stylesheets);else if(this.unsuspend){var h=this.unsuspend;this.unsuspend=null,h()}}}var S_=null;function k_(h,w){h.stylesheets=null,h.unsuspend!==null&&(h.count++,S_=new Map,w.forEach(Jue,h),S_=null,w_.call(h))}function Jue(h,w){if(!(w.state.loading&4)){var _=S_.get(h);if(_)var M=_.get(null);else{_=new Map,S_.set(h,_);for(var W=h.querySelectorAll("link[data-precedence],style[data-precedence]"),ee=0;ee<W.length;ee++){var Se=W[ee];(Se.nodeName==="LINK"||Se.getAttribute("media")!=="not all")&&(_.set(Se.dataset.precedence,Se),M=Se)}M&&_.set(null,M)}W=w.instance,Se=W.getAttribute("data-precedence"),ee=_.get(Se)||M,ee===M&&_.set(null,W),_.set(Se,W),this.count++,M=w_.bind(this),W.addEventListener("load",M),W.addEventListener("error",M),ee?ee.parentNode.insertBefore(W,ee.nextSibling):(h=h.nodeType===9?h.head:h,h.insertBefore(W,h.firstChild)),w.state.loading|=4}}var t0={$$typeof:k,Provider:null,Consumer:null,_currentValue:de,_currentValue2:de,_threadCount:0};function eme(h,w,_,M,W,ee,Se,He,pt){this.tag=1,this.containerInfo=h,this.pingCache=this.current=this.pendingChildren=null,this.timeoutHandle=-1,this.callbackNode=this.next=this.pendingContext=this.context=this.cancelPendingCommit=null,this.callbackPriority=0,this.expirationTimes=Ae(-1),this.entangledLanes=this.shellSuspendCounter=this.errorRecoveryDisabledLanes=this.expiredLanes=this.warmLanes=this.pingedLanes=this.suspendedLanes=this.pendingLanes=0,this.entanglements=Ae(0),this.hiddenUpdates=Ae(null),this.identifierPrefix=M,this.onUncaughtError=W,this.onCaughtError=ee,this.onRecoverableError=Se,this.pooledCache=null,this.pooledCacheLanes=0,this.formState=pt,this.incompleteTransitions=new Map}function bq(h,w,_,M,W,ee,Se,He,pt,Et,qt,Wt){return h=new eme(h,w,_,Se,pt,Et,qt,Wt,He),w=1,ee===!0&&(w|=24),ee=sl(3,null,null,w),h.current=ee,ee.stateNode=h,w=jj(),w.refCount++,h.pooledCache=w,w.refCount++,ee.memoizedState={element:M,isDehydrated:_,cache:w},Fj(ee),h}function xq(h){return h?(h=Ab,h):Ab}function yq(h,w,_,M,W,ee){W=xq(W),M.context===null?M.context=W:M.pendingContext=W,M=Ap(w),M.payload={element:_},ee=ee===void 0?null:ee,ee!==null&&(M.callback=ee),_=jp(h,M,w),_!==null&&(Io(_,h,w),Dv(_,h,w))}function vq(h,w){if(h=h.memoizedState,h!==null&&h.dehydrated!==null){var _=h.retryLane;h.retryLane=_!==0&&_<w?_:w}}function ZM(h,w){vq(h,w),(h=h.alternate)&&vq(h,w)}function wq(h){if(h.tag===13||h.tag===31){var w=_f(h,67108864);w!==null&&Io(w,h,67108864),ZM(h,67108864)}}function Sq(h){if(h.tag===13||h.tag===31){var w=ul();w=Vt(w);var _=_f(h,w);_!==null&&Io(_,h,w),ZM(h,w)}}var __=!0;function tme(h,w,_,M){var W=te.T;te.T=null;var ee=J.p;try{J.p=2,JM(h,w,_,M)}finally{J.p=ee,te.T=W}}function ame(h,w,_,M){var W=te.T;te.T=null;var ee=J.p;try{J.p=8,JM(h,w,_,M)}finally{J.p=ee,te.T=W}}function JM(h,w,_,M){if(__){var W=eE(M);if(W===null)OM(h,w,M,P_,_),_q(h,M);else if(nme(W,h,w,_,M))M.stopPropagation();else if(_q(h,M),w&4&&-1<rme.indexOf(h)){for(;W!==null;){var ee=we(W);if(ee!==null)switch(ee.tag){case 3:if(ee=ee.stateNode,ee.current.memoizedState.isDehydrated){var Se=$e(ee.pendingLanes);if(Se!==0){var He=ee;for(He.pendingLanes|=2,He.entangledLanes|=2;Se;){var pt=1<<31-qe(Se);He.entanglements[1]|=pt,Se&=~pt}Rd(ee),(Br&6)===0&&(o_=z()+500,Yv(0))}}break;case 31:case 13:He=_f(ee,2),He!==null&&Io(He,ee,2),c_(),ZM(ee,2)}if(ee=eE(M),ee===null&&OM(h,w,M,P_,_),ee===W)break;W=ee}W!==null&&M.stopPropagation()}else OM(h,w,M,null,_)}}function eE(h){return h=mn(h),tE(h)}var P_=null;function tE(h){if(P_=null,h=lt(h),h!==null){var w=s(h);if(w===null)h=null;else{var _=w.tag;if(_===13){if(h=o(w),h!==null)return h;h=null}else if(_===31){if(h=l(w),h!==null)return h;h=null}else if(_===3){if(w.stateNode.current.memoizedState.isDehydrated)return w.tag===3?w.stateNode.containerInfo:null;h=null}else w!==h&&(h=null)}}return P_=h,null}function kq(h){switch(h){case"beforetoggle":case"cancel":case"click":case"close":case"contextmenu":case"copy":case"cut":case"auxclick":case"dblclick":case"dragend":case"dragstart":case"drop":case"focusin":case"focusout":case"input":case"invalid":case"keydown":case"keypress":case"keyup":case"mousedown":case"mouseup":case"paste":case"pause":case"play":case"pointercancel":case"pointerdown":case"pointerup":case"ratechange":case"reset":case"resize":case"seeked":case"submit":case"toggle":case"touchcancel":case"touchend":case"touchstart":case"volumechange":case"change":case"selectionchange":case"textInput":case"compositionstart":case"compositionend":case"compositionupdate":case"beforeblur":case"afterblur":case"beforeinput":case"blur":case"fullscreenchange":case"focus":case"hashchange":case"popstate":case"select":case"selectstart":return 2;case"drag":case"dragenter":case"dragexit":case"dragleave":case"dragover":case"mousemove":case"mouseout":case"mouseover":case"pointermove":case"pointerout":case"pointerover":case"scroll":case"touchmove":case"wheel":case"mouseenter":case"mouseleave":case"pointerenter":case"pointerleave":return 8;case"message":switch(ae()){case ge:return 2;case be:return 8;case ve:case Me:return 32;case Ee:return 268435456;default:return 32}default:return 32}}var aE=!1,Up=null,Hp=null,qp=null,a0=new Map,r0=new Map,Gp=[],rme="mousedown mouseup touchcancel touchend touchstart auxclick dblclick pointercancel pointerdown pointerup dragend dragstart drop compositionend compositionstart keydown keypress keyup input textInput copy cut paste click change contextmenu reset".split(" ");function _q(h,w){switch(h){case"focusin":case"focusout":Up=null;break;case"dragenter":case"dragleave":Hp=null;break;case"mouseover":case"mouseout":qp=null;break;case"pointerover":case"pointerout":a0.delete(w.pointerId);break;case"gotpointercapture":case"lostpointercapture":r0.delete(w.pointerId)}}function n0(h,w,_,M,W,ee){return h===null||h.nativeEvent!==ee?(h={blockedOn:w,domEventName:_,eventSystemFlags:M,nativeEvent:ee,targetContainers:[W]},w!==null&&(w=we(w),w!==null&&wq(w)),h):(h.eventSystemFlags|=M,w=h.targetContainers,W!==null&&w.indexOf(W)===-1&&w.push(W),h)}function nme(h,w,_,M,W){switch(w){case"focusin":return Up=n0(Up,h,w,_,M,W),!0;case"dragenter":return Hp=n0(Hp,h,w,_,M,W),!0;case"mouseover":return qp=n0(qp,h,w,_,M,W),!0;case"pointerover":var ee=W.pointerId;return a0.set(ee,n0(a0.get(ee)||null,h,w,_,M,W)),!0;case"gotpointercapture":return ee=W.pointerId,r0.set(ee,n0(r0.get(ee)||null,h,w,_,M,W)),!0}return!1}function Pq(h){var w=lt(h.target);if(w!==null){var _=s(w);if(_!==null){if(w=_.tag,w===13){if(w=o(_),w!==null){h.blockedOn=w,fa(h.priority,function(){Sq(_)});return}}else if(w===31){if(w=l(_),w!==null){h.blockedOn=w,fa(h.priority,function(){Sq(_)});return}}else if(w===3&&_.stateNode.current.memoizedState.isDehydrated){h.blockedOn=_.tag===3?_.stateNode.containerInfo:null;return}}}h.blockedOn=null}function C_(h){if(h.blockedOn!==null)return!1;for(var w=h.targetContainers;0<w.length;){var _=eE(h.nativeEvent);if(_===null){_=h.nativeEvent;var M=new _.constructor(_.type,_);Ll=M,_.target.dispatchEvent(M),Ll=null}else return w=we(_),w!==null&&wq(w),h.blockedOn=_,!1;w.shift()}return!0}function Cq(h,w,_){C_(h)&&_.delete(w)}function ime(){aE=!1,Up!==null&&C_(Up)&&(Up=null),Hp!==null&&C_(Hp)&&(Hp=null),qp!==null&&C_(qp)&&(qp=null),a0.forEach(Cq),r0.forEach(Cq)}function N_(h,w){h.blockedOn===w&&(h.blockedOn=null,aE||(aE=!0,t.unstable_scheduleCallback(t.unstable_NormalPriority,ime)))}var T_=null;function Nq(h){T_!==h&&(T_=h,t.unstable_scheduleCallback(t.unstable_NormalPriority,function(){T_===h&&(T_=null);for(var w=0;w<h.length;w+=3){var _=h[w],M=h[w+1],W=h[w+2];if(typeof M!="function"){if(tE(M||_)===null)continue;break}var ee=we(_);ee!==null&&(h.splice(w,3),w-=3,eM(ee,{pending:!0,data:W,method:_.method,action:M},M,W))}}))}function Jb(h){function w(pt){return N_(pt,h)}Up!==null&&N_(Up,h),Hp!==null&&N_(Hp,h),qp!==null&&N_(qp,h),a0.forEach(w),r0.forEach(w);for(var _=0;_<Gp.length;_++){var M=Gp[_];M.blockedOn===h&&(M.blockedOn=null)}for(;0<Gp.length&&(_=Gp[0],_.blockedOn===null);)Pq(_),_.blockedOn===null&&Gp.shift();if(_=(h.ownerDocument||h).$$reactFormReplay,_!=null)for(M=0;M<_.length;M+=3){var W=_[M],ee=_[M+1],Se=W[Pt]||null;if(typeof ee=="function")Se||Nq(_);else if(Se){var He=null;if(ee&&ee.hasAttribute("formAction")){if(W=ee,Se=ee[Pt]||null)He=Se.formAction;else if(tE(W)!==null)continue}else He=Se.action;typeof He=="function"?_[M+1]=He:(_.splice(M,3),M-=3),Nq(_)}}}function Tq(){function h(ee){ee.canIntercept&&ee.info==="react-transition"&&ee.intercept({handler:function(){return new Promise(function(Se){return W=Se})},focusReset:"manual",scroll:"manual"})}function w(){W!==null&&(W(),W=null),M||setTimeout(_,20)}function _(){if(!M&&!navigation.transition){var ee=navigation.currentEntry;ee&&ee.url!=null&&navigation.navigate(ee.url,{state:ee.getState(),info:"react-transition",history:"replace"})}}if(typeof navigation=="object"){var M=!1,W=null;return navigation.addEventListener("navigate",h),navigation.addEventListener("navigatesuccess",w),navigation.addEventListener("navigateerror",w),setTimeout(_,100),function(){M=!0,navigation.removeEventListener("navigate",h),navigation.removeEventListener("navigatesuccess",w),navigation.removeEventListener("navigateerror",w),W!==null&&(W(),W=null)}}}function rE(h){this._internalRoot=h}A_.prototype.render=rE.prototype.render=function(h){var w=this._internalRoot;if(w===null)throw Error(n(409));var _=w.current,M=ul();yq(_,M,h,w,null,null)},A_.prototype.unmount=rE.prototype.unmount=function(){var h=this._internalRoot;if(h!==null){this._internalRoot=null;var w=h.containerInfo;yq(h.current,2,null,h,null,null),c_(),w[Tt]=null}};function A_(h){this._internalRoot=h}A_.prototype.unstable_scheduleHydration=function(h){if(h){var w=oa();h={blockedOn:null,target:h,priority:w};for(var _=0;_<Gp.length&&w!==0&&w<Gp[_].priority;_++);Gp.splice(_,0,h),_===0&&Pq(h)}};var Aq=e.version;if(Aq!=="19.2.4")throw Error(n(527,Aq,"19.2.4"));J.findDOMNode=function(h){var w=h._reactInternals;if(w===void 0)throw typeof h.render=="function"?Error(n(188)):(h=Object.keys(h).join(","),Error(n(268,h)));return h=d(w),h=h!==null?u(h):null,h=h===null?null:h.stateNode,h};var sme={bundleType:0,version:"19.2.4",rendererPackageName:"react-dom",currentDispatcherRef:te,reconcilerVersion:"19.2.4"};if(typeof __REACT_DEVTOOLS_GLOBAL_HOOK__<"u"){var j_=__REACT_DEVTOOLS_GLOBAL_HOOK__;if(!j_.isDisabled&&j_.supportsFiber)try{Ce=j_.inject(sme),Ie=j_}catch{}}return s0.createRoot=function(h,w){if(!i(h))throw Error(n(299));var _=!1,M="",W=RU,ee=zU,Se=IU;return w!=null&&(w.unstable_strictMode===!0&&(_=!0),w.identifierPrefix!==void 0&&(M=w.identifierPrefix),w.onUncaughtError!==void 0&&(W=w.onUncaughtError),w.onCaughtError!==void 0&&(ee=w.onCaughtError),w.onRecoverableError!==void 0&&(Se=w.onRecoverableError)),w=bq(h,1,!1,null,null,_,M,null,W,ee,Se,Tq),h[Tt]=w.current,IM(h),new rE(w)},s0.hydrateRoot=function(h,w,_){if(!i(h))throw Error(n(299));var M=!1,W="",ee=RU,Se=zU,He=IU,pt=null;return _!=null&&(_.unstable_strictMode===!0&&(M=!0),_.identifierPrefix!==void 0&&(W=_.identifierPrefix),_.onUncaughtError!==void 0&&(ee=_.onUncaughtError),_.onCaughtError!==void 0&&(Se=_.onCaughtError),_.onRecoverableError!==void 0&&(He=_.onRecoverableError),_.formState!==void 0&&(pt=_.formState)),w=bq(h,1,!0,w,_??null,M,W,pt,ee,Se,He,Tq),w.context=xq(null),_=w.current,M=ul(),M=Vt(M),W=Ap(M),W.callback=null,jp(_,W,M),_=M,w.current.lanes=_,rt(w,_),Rd(w),h[Tt]=w.current,IM(h),new A_(w)},s0.version="19.2.4",s0}var Oq;function bme(){if(Oq)return sE.exports;Oq=1;function t(){if(!(typeof __REACT_DEVTOOLS_GLOBAL_HOOK__>"u"||typeof __REACT_DEVTOOLS_GLOBAL_HOOK__.checkDCE!="function"))try{__REACT_DEVTOOLS_GLOBAL_HOOK__.checkDCE(t)}catch(e){console.error(e)}}return t(),sE.exports=gme(),sE.exports}var xme=bme();const qa=t=>typeof t=="string",o0=()=>{let t,e;const a=new Promise((n,i)=>{t=n,e=i});return a.resolve=t,a.reject=e,a},Bq=t=>t==null?"":""+t,yme=(t,e,a)=>{t.forEach(n=>{e[n]&&(a[n]=e[n])})},vme=/###/g,Uq=t=>t&&t.indexOf("###")>-1?t.replace(vme,"."):t,Hq=t=>!t||qa(t),nw=(t,e,a)=>{const n=qa(e)?e.split("."):e;let i=0;for(;i<n.length-1;){if(Hq(t))return{};const s=Uq(n[i]);!t[s]&&a&&(t[s]=new a),Object.prototype.hasOwnProperty.call(t,s)?t=t[s]:t={},++i}return Hq(t)?{}:{obj:t,k:Uq(n[i])}},qq=(t,e,a)=>{const{obj:n,k:i}=nw(t,e,Object);if(n!==void 0||e.length===1){n[i]=a;return}let s=e[e.length-1],o=e.slice(0,e.length-1),l=nw(t,o,Object);for(;l.obj===void 0&&o.length;)s=`${o[o.length-1]}.${s}`,o=o.slice(0,o.length-1),l=nw(t,o,Object),l?.obj&&typeof l.obj[`${l.k}.${s}`]<"u"&&(l.obj=void 0);l.obj[`${l.k}.${s}`]=a},wme=(t,e,a,n)=>{const{obj:i,k:s}=nw(t,e,Object);i[s]=i[s]||[],i[s].push(a)},tN=(t,e)=>{const{obj:a,k:n}=nw(t,e);if(a&&Object.prototype.hasOwnProperty.call(a,n))return a[n]},Sme=(t,e,a)=>{const n=tN(t,a);return n!==void 0?n:tN(e,a)},nZ=(t,e,a)=>{for(const n in e)n!=="__proto__"&&n!=="constructor"&&(n in t?qa(t[n])||t[n]instanceof String||qa(e[n])||e[n]instanceof String?a&&(t[n]=e[n]):nZ(t[n],e[n],a):t[n]=e[n]);return t},ex=t=>t.replace(/[\-\[\]\/\{\}\(\)\*\+\?\.\\\^\$\|]/g,"\\$&");var kme={"&":"&amp;","<":"&lt;",">":"&gt;",'"':"&quot;","'":"&#39;","/":"&#x2F;"};const _me=t=>qa(t)?t.replace(/[&<>"'\/]/g,e=>kme[e]):t;class Pme{constructor(e){this.capacity=e,this.regExpMap=new Map,this.regExpQueue=[]}getRegExp(e){const a=this.regExpMap.get(e);if(a!==void 0)return a;const n=new RegExp(e);return this.regExpQueue.length===this.capacity&&this.regExpMap.delete(this.regExpQueue.shift()),this.regExpMap.set(e,n),this.regExpQueue.push(e),n}}const Cme=[" ",",","?","!",";"],Nme=new Pme(20),Tme=(t,e,a)=>{e=e||"",a=a||"";const n=Cme.filter(o=>e.indexOf(o)<0&&a.indexOf(o)<0);if(n.length===0)return!0;const i=Nme.getRegExp(`(${n.map(o=>o==="?"?"\\?":o).join("|")})`);let s=!i.test(t);if(!s){const o=t.indexOf(a);o>0&&!i.test(t.substring(0,o))&&(s=!0)}return s},UL=(t,e,a=".")=>{if(!t)return;if(t[e])return Object.prototype.hasOwnProperty.call(t,e)?t[e]:void 0;const n=e.split(a);let i=t;for(let s=0;s<n.length;){if(!i||typeof i!="object")return;let o,l="";for(let c=s;c<n.length;++c)if(c!==s&&(l+=a),l+=n[c],o=i[l],o!==void 0){if(["string","number","boolean"].indexOf(typeof o)>-1&&c<n.length-1)continue;s+=c-s+1;break}i=o}return i},Lw=t=>t?.replace("_","-"),Ame={type:"logger",log(t){this.output("log",t)},warn(t){this.output("warn",t)},error(t){this.output("error",t)},output(t,e){console?.[t]?.apply?.(console,e)}};class aN{constructor(e,a={}){this.init(e,a)}init(e,a={}){this.prefix=a.prefix||"i18next:",this.logger=e||Ame,this.options=a,this.debug=a.debug}log(...e){return this.forward(e,"log","",!0)}warn(...e){return this.forward(e,"warn","",!0)}error(...e){return this.forward(e,"error","")}deprecate(...e){return this.forward(e,"warn","WARNING DEPRECATED: ",!0)}forward(e,a,n,i){return i&&!this.debug?null:(qa(e[0])&&(e[0]=`${n}${this.prefix} ${e[0]}`),this.logger[a](e))}create(e){return new aN(this.logger,{prefix:`${this.prefix}:${e}:`,...this.options})}clone(e){return e=e||this.options,e.prefix=e.prefix||this.prefix,new aN(this.logger,e)}}var tu=new aN;let CT=class{constructor(){this.observers={}}on(e,a){return e.split(" ").forEach(n=>{this.observers[n]||(this.observers[n]=new Map);const i=this.observers[n].get(a)||0;this.observers[n].set(a,i+1)}),this}off(e,a){if(this.observers[e]){if(!a){delete this.observers[e];return}this.observers[e].delete(a)}}emit(e,...a){this.observers[e]&&Array.from(this.observers[e].entries()).forEach(([i,s])=>{for(let o=0;o<s;o++)i(...a)}),this.observers["*"]&&Array.from(this.observers["*"].entries()).forEach(([i,s])=>{for(let o=0;o<s;o++)i.apply(i,[e,...a])})}};class Gq extends CT{constructor(e,a={ns:["translation"],defaultNS:"translation"}){super(),this.data=e||{},this.options=a,this.options.keySeparator===void 0&&(this.options.keySeparator="."),this.options.ignoreJSONStructure===void 0&&(this.options.ignoreJSONStructure=!0)}addNamespaces(e){this.options.ns.indexOf(e)<0&&this.options.ns.push(e)}removeNamespaces(e){const a=this.options.ns.indexOf(e);a>-1&&this.options.ns.splice(a,1)}getResource(e,a,n,i={}){const s=i.keySeparator!==void 0?i.keySeparator:this.options.keySeparator,o=i.ignoreJSONStructure!==void 0?i.ignoreJSONStructure:this.options.ignoreJSONStructure;let l;e.indexOf(".")>-1?l=e.split("."):(l=[e,a],n&&(Array.isArray(n)?l.push(...n):qa(n)&&s?l.push(...n.split(s)):l.push(n)));const c=tN(this.data,l);return!c&&!a&&!n&&e.indexOf(".")>-1&&(e=l[0],a=l[1],n=l.slice(2).join(".")),c||!o||!qa(n)?c:UL(this.data?.[e]?.[a],n,s)}addResource(e,a,n,i,s={silent:!1}){const o=s.keySeparator!==void 0?s.keySeparator:this.options.keySeparator;let l=[e,a];n&&(l=l.concat(o?n.split(o):n)),e.indexOf(".")>-1&&(l=e.split("."),i=a,a=l[1]),this.addNamespaces(a),qq(this.data,l,i),s.silent||this.emit("added",e,a,n,i)}addResources(e,a,n,i={silent:!1}){for(const s in n)(qa(n[s])||Array.isArray(n[s]))&&this.addResource(e,a,s,n[s],{silent:!0});i.silent||this.emit("added",e,a,n)}addResourceBundle(e,a,n,i,s,o={silent:!1,skipCopy:!1}){let l=[e,a];e.indexOf(".")>-1&&(l=e.split("."),i=n,n=a,a=l[1]),this.addNamespaces(a);let c=tN(this.data,l)||{};o.skipCopy||(n=JSON.parse(JSON.stringify(n))),i?nZ(c,n,s):c={...c,...n},qq(this.data,l,c),o.silent||this.emit("added",e,a,n)}removeResourceBundle(e,a){this.hasResourceBundle(e,a)&&delete this.data[e][a],this.removeNamespaces(a),this.emit("removed",e,a)}hasResourceBundle(e,a){return this.getResource(e,a)!==void 0}getResourceBundle(e,a){return a||(a=this.options.defaultNS),this.getResource(e,a)}getDataByLanguage(e){return this.data[e]}hasLanguageSomeTranslations(e){const a=this.getDataByLanguage(e);return!!(a&&Object.keys(a)||[]).find(i=>a[i]&&Object.keys(a[i]).length>0)}toJSON(){return this.data}}var iZ={processors:{},addPostProcessor(t){this.processors[t.name]=t},handle(t,e,a,n,i){return t.forEach(s=>{e=this.processors[s]?.process(e,a,n,i)??e}),e}};const sZ=Symbol("i18next/PATH_KEY");function jme(){const t=[],e=Object.create(null);let a;return e.get=(n,i)=>(a?.revoke?.(),i===sZ?t:(t.push(i),a=Proxy.revocable(n,e),a.proxy)),Proxy.revocable(Object.create(null),e).proxy}function HL(t,e){const{[sZ]:a}=t(jme());return a.join(e?.keySeparator??".")}const $q={},dE=t=>!qa(t)&&typeof t!="boolean"&&typeof t!="number";class rN extends CT{constructor(e,a={}){super(),yme(["resourceStore","languageUtils","pluralResolver","interpolator","backendConnector","i18nFormat","utils"],e,this),this.options=a,this.options.keySeparator===void 0&&(this.options.keySeparator="."),this.logger=tu.create("translator")}changeLanguage(e){e&&(this.language=e)}exists(e,a={interpolation:{}}){const n={...a};if(e==null)return!1;const i=this.resolve(e,n);if(i?.res===void 0)return!1;const s=dE(i.res);return!(n.returnObjects===!1&&s)}extractFromKey(e,a){let n=a.nsSeparator!==void 0?a.nsSeparator:this.options.nsSeparator;n===void 0&&(n=":");const i=a.keySeparator!==void 0?a.keySeparator:this.options.keySeparator;let s=a.ns||this.options.defaultNS||[];const o=n&&e.indexOf(n)>-1,l=!this.options.userDefinedKeySeparator&&!a.keySeparator&&!this.options.userDefinedNsSeparator&&!a.nsSeparator&&!Tme(e,n,i);if(o&&!l){const c=e.match(this.interpolator.nestingRegexp);if(c&&c.length>0)return{key:e,namespaces:qa(s)?[s]:s};const d=e.split(n);(n!==i||n===i&&this.options.ns.indexOf(d[0])>-1)&&(s=d.shift()),e=d.join(i)}return{key:e,namespaces:qa(s)?[s]:s}}translate(e,a,n){let i=typeof a=="object"?{...a}:a;if(typeof i!="object"&&this.options.overloadTranslationOptionHandler&&(i=this.options.overloadTranslationOptionHandler(arguments)),typeof i=="object"&&(i={...i}),i||(i={}),e==null)return"";typeof e=="function"&&(e=HL(e,{...this.options,...i})),Array.isArray(e)||(e=[String(e)]);const s=i.returnDetails!==void 0?i.returnDetails:this.options.returnDetails,o=i.keySeparator!==void 0?i.keySeparator:this.options.keySeparator,{key:l,namespaces:c}=this.extractFromKey(e[e.length-1],i),d=c[c.length-1];let u=i.nsSeparator!==void 0?i.nsSeparator:this.options.nsSeparator;u===void 0&&(u=":");const m=i.lng||this.language,p=i.appendNamespaceToCIMode||this.options.appendNamespaceToCIMode;if(m?.toLowerCase()==="cimode")return p?s?{res:`${d}${u}${l}`,usedKey:l,exactUsedKey:l,usedLng:m,usedNS:d,usedParams:this.getUsedParamsDetails(i)}:`${d}${u}${l}`:s?{res:l,usedKey:l,exactUsedKey:l,usedLng:m,usedNS:d,usedParams:this.getUsedParamsDetails(i)}:l;const f=this.resolve(e,i);let g=f?.res;const v=f?.usedKey||l,b=f?.exactUsedKey||l,x=["[object Number]","[object Function]","[object RegExp]"],S=i.joinArrays!==void 0?i.joinArrays:this.options.joinArrays,k=!this.i18nFormat||this.i18nFormat.handleAsObject,C=i.count!==void 0&&!qa(i.count),N=rN.hasDefaultValue(i),T=C?this.pluralResolver.getSuffix(m,i.count,i):"",j=i.ordinal&&C?this.pluralResolver.getSuffix(m,i.count,{ordinal:!1}):"",D=C&&!i.ordinal&&i.count===0,P=D&&i[`defaultValue${this.options.pluralSeparator}zero`]||i[`defaultValue${T}`]||i[`defaultValue${j}`]||i.defaultValue;let E=g;k&&!g&&N&&(E=P);const R=dE(E),O=Object.prototype.toString.apply(E);if(k&&E&&R&&x.indexOf(O)<0&&!(qa(S)&&Array.isArray(E))){if(!i.returnObjects&&!this.options.returnObjects){this.options.returnedObjectHandler||this.logger.warn("accessing an object - but returnObjects options is not enabled!");const I=this.options.returnedObjectHandler?this.options.returnedObjectHandler(v,E,{...i,ns:c}):`key '${l} (${this.language})' returned an object instead of string.`;return s?(f.res=I,f.usedParams=this.getUsedParamsDetails(i),f):I}if(o){const I=Array.isArray(E),L=I?[]:{},Y=I?b:v;for(const te in E)if(Object.prototype.hasOwnProperty.call(E,te)){const J=`${Y}${o}${te}`;N&&!g?L[te]=this.translate(J,{...i,defaultValue:dE(P)?P[te]:void 0,joinArrays:!1,ns:c}):L[te]=this.translate(J,{...i,joinArrays:!1,ns:c}),L[te]===J&&(L[te]=E[te])}g=L}}else if(k&&qa(S)&&Array.isArray(g))g=g.join(S),g&&(g=this.extendTranslation(g,e,i,n));else{let I=!1,L=!1;!this.isValidLookup(g)&&N&&(I=!0,g=P),this.isValidLookup(g)||(L=!0,g=l);const te=(i.missingKeyNoValueFallbackToKey||this.options.missingKeyNoValueFallbackToKey)&&L?void 0:g,J=N&&P!==g&&this.options.updateMissing;if(L||I||J){if(this.logger.log(J?"updateKey":"missingKey",m,d,l,J?P:g),o){const Q=this.resolve(l,{...i,keySeparator:!1});Q&&Q.res&&this.logger.warn("Seems the loaded translations were in flat JSON format instead of nested. Either set keySeparator: false on init or make sure your translations are published in nested format.")}let de=[];const ue=this.languageUtils.getFallbackCodes(this.options.fallbackLng,i.lng||this.language);if(this.options.saveMissingTo==="fallback"&&ue&&ue[0])for(let Q=0;Q<ue.length;Q++)de.push(ue[Q]);else this.options.saveMissingTo==="all"?de=this.languageUtils.toResolveHierarchy(i.lng||this.language):de.push(i.lng||this.language);const le=(Q,re,me)=>{const pe=N&&me!==g?me:te;this.options.missingKeyHandler?this.options.missingKeyHandler(Q,d,re,pe,J,i):this.backendConnector?.saveMissing&&this.backendConnector.saveMissing(Q,d,re,pe,J,i),this.emit("missingKey",Q,d,re,g)};this.options.saveMissing&&(this.options.saveMissingPlurals&&C?de.forEach(Q=>{const re=this.pluralResolver.getSuffixes(Q,i);D&&i[`defaultValue${this.options.pluralSeparator}zero`]&&re.indexOf(`${this.options.pluralSeparator}zero`)<0&&re.push(`${this.options.pluralSeparator}zero`),re.forEach(me=>{le([Q],l+me,i[`defaultValue${me}`]||P)})}):le(de,l,P))}g=this.extendTranslation(g,e,i,f,n),L&&g===l&&this.options.appendNamespaceToMissingKey&&(g=`${d}${u}${l}`),(L||I)&&this.options.parseMissingKeyHandler&&(g=this.options.parseMissingKeyHandler(this.options.appendNamespaceToMissingKey?`${d}${u}${l}`:l,I?g:void 0,i))}return s?(f.res=g,f.usedParams=this.getUsedParamsDetails(i),f):g}extendTranslation(e,a,n,i,s){if(this.i18nFormat?.parse)e=this.i18nFormat.parse(e,{...this.options.interpolation.defaultVariables,...n},n.lng||this.language||i.usedLng,i.usedNS,i.usedKey,{resolved:i});else if(!n.skipInterpolation){n.interpolation&&this.interpolator.init({...n,interpolation:{...this.options.interpolation,...n.interpolation}});const c=qa(e)&&(n?.interpolation?.skipOnVariables!==void 0?n.interpolation.skipOnVariables:this.options.interpolation.skipOnVariables);let d;if(c){const m=e.match(this.interpolator.nestingRegexp);d=m&&m.length}let u=n.replace&&!qa(n.replace)?n.replace:n;if(this.options.interpolation.defaultVariables&&(u={...this.options.interpolation.defaultVariables,...u}),e=this.interpolator.interpolate(e,u,n.lng||this.language||i.usedLng,n),c){const m=e.match(this.interpolator.nestingRegexp),p=m&&m.length;d<p&&(n.nest=!1)}!n.lng&&i&&i.res&&(n.lng=this.language||i.usedLng),n.nest!==!1&&(e=this.interpolator.nest(e,(...m)=>s?.[0]===m[0]&&!n.context?(this.logger.warn(`It seems you are nesting recursively key: ${m[0]} in key: ${a[0]}`),null):this.translate(...m,a),n)),n.interpolation&&this.interpolator.reset()}const o=n.postProcess||this.options.postProcess,l=qa(o)?[o]:o;return e!=null&&l?.length&&n.applyPostProcessor!==!1&&(e=iZ.handle(l,e,a,this.options&&this.options.postProcessPassResolved?{i18nResolved:{...i,usedParams:this.getUsedParamsDetails(n)},...n}:n,this)),e}resolve(e,a={}){let n,i,s,o,l;return qa(e)&&(e=[e]),e.forEach(c=>{if(this.isValidLookup(n))return;const d=this.extractFromKey(c,a),u=d.key;i=u;let m=d.namespaces;this.options.fallbackNS&&(m=m.concat(this.options.fallbackNS));const p=a.count!==void 0&&!qa(a.count),f=p&&!a.ordinal&&a.count===0,g=a.context!==void 0&&(qa(a.context)||typeof a.context=="number")&&a.context!=="",v=a.lngs?a.lngs:this.languageUtils.toResolveHierarchy(a.lng||this.language,a.fallbackLng);m.forEach(b=>{this.isValidLookup(n)||(l=b,!$q[`${v[0]}-${b}`]&&this.utils?.hasLoadedNamespace&&!this.utils?.hasLoadedNamespace(l)&&($q[`${v[0]}-${b}`]=!0,this.logger.warn(`key "${i}" for languages "${v.join(", ")}" won't get resolved as namespace "${l}" was not yet loaded`,"This means something IS WRONG in your setup. You access the t function before i18next.init / i18next.loadNamespace / i18next.changeLanguage was done. Wait for the callback or Promise to resolve before accessing it!!!")),v.forEach(x=>{if(this.isValidLookup(n))return;o=x;const S=[u];if(this.i18nFormat?.addLookupKeys)this.i18nFormat.addLookupKeys(S,u,x,b,a);else{let C;p&&(C=this.pluralResolver.getSuffix(x,a.count,a));const N=`${this.options.pluralSeparator}zero`,T=`${this.options.pluralSeparator}ordinal${this.options.pluralSeparator}`;if(p&&(a.ordinal&&C.indexOf(T)===0&&S.push(u+C.replace(T,this.options.pluralSeparator)),S.push(u+C),f&&S.push(u+N)),g){const j=`${u}${this.options.contextSeparator||"_"}${a.context}`;S.push(j),p&&(a.ordinal&&C.indexOf(T)===0&&S.push(j+C.replace(T,this.options.pluralSeparator)),S.push(j+C),f&&S.push(j+N))}}let k;for(;k=S.pop();)this.isValidLookup(n)||(s=k,n=this.getResource(x,b,k,a))}))})}),{res:n,usedKey:i,exactUsedKey:s,usedLng:o,usedNS:l}}isValidLookup(e){return e!==void 0&&!(!this.options.returnNull&&e===null)&&!(!this.options.returnEmptyString&&e==="")}getResource(e,a,n,i={}){return this.i18nFormat?.getResource?this.i18nFormat.getResource(e,a,n,i):this.resourceStore.getResource(e,a,n,i)}getUsedParamsDetails(e={}){const a=["defaultValue","ordinal","context","replace","lng","lngs","fallbackLng","ns","keySeparator","nsSeparator","returnObjects","returnDetails","joinArrays","postProcess","interpolation"],n=e.replace&&!qa(e.replace);let i=n?e.replace:e;if(n&&typeof e.count<"u"&&(i.count=e.count),this.options.interpolation.defaultVariables&&(i={...this.options.interpolation.defaultVariables,...i}),!n){i={...i};for(const s of a)delete i[s]}return i}static hasDefaultValue(e){const a="defaultValue";for(const n in e)if(Object.prototype.hasOwnProperty.call(e,n)&&a===n.substring(0,a.length)&&e[n]!==void 0)return!0;return!1}}class Vq{constructor(e){this.options=e,this.supportedLngs=this.options.supportedLngs||!1,this.logger=tu.create("languageUtils")}getScriptPartFromCode(e){if(e=Lw(e),!e||e.indexOf("-")<0)return null;const a=e.split("-");return a.length===2||(a.pop(),a[a.length-1].toLowerCase()==="x")?null:this.formatLanguageCode(a.join("-"))}getLanguagePartFromCode(e){if(e=Lw(e),!e||e.indexOf("-")<0)return e;const a=e.split("-");return this.formatLanguageCode(a[0])}formatLanguageCode(e){if(qa(e)&&e.indexOf("-")>-1){let a;try{a=Intl.getCanonicalLocales(e)[0]}catch{}return a&&this.options.lowerCaseLng&&(a=a.toLowerCase()),a||(this.options.lowerCaseLng?e.toLowerCase():e)}return this.options.cleanCode||this.options.lowerCaseLng?e.toLowerCase():e}isSupportedCode(e){return(this.options.load==="languageOnly"||this.options.nonExplicitSupportedLngs)&&(e=this.getLanguagePartFromCode(e)),!this.supportedLngs||!this.supportedLngs.length||this.supportedLngs.indexOf(e)>-1}getBestMatchFromCodes(e){if(!e)return null;let a;return e.forEach(n=>{if(a)return;const i=this.formatLanguageCode(n);(!this.options.supportedLngs||this.isSupportedCode(i))&&(a=i)}),!a&&this.options.supportedLngs&&e.forEach(n=>{if(a)return;const i=this.getScriptPartFromCode(n);if(this.isSupportedCode(i))return a=i;const s=this.getLanguagePartFromCode(n);if(this.isSupportedCode(s))return a=s;a=this.options.supportedLngs.find(o=>{if(o===s)return o;if(!(o.indexOf("-")<0&&s.indexOf("-")<0)&&(o.indexOf("-")>0&&s.indexOf("-")<0&&o.substring(0,o.indexOf("-"))===s||o.indexOf(s)===0&&s.length>1))return o})}),a||(a=this.getFallbackCodes(this.options.fallbackLng)[0]),a}getFallbackCodes(e,a){if(!e)return[];if(typeof e=="function"&&(e=e(a)),qa(e)&&(e=[e]),Array.isArray(e))return e;if(!a)return e.default||[];let n=e[a];return n||(n=e[this.getScriptPartFromCode(a)]),n||(n=e[this.formatLanguageCode(a)]),n||(n=e[this.getLanguagePartFromCode(a)]),n||(n=e.default),n||[]}toResolveHierarchy(e,a){const n=this.getFallbackCodes((a===!1?[]:a)||this.options.fallbackLng||[],e),i=[],s=o=>{o&&(this.isSupportedCode(o)?i.push(o):this.logger.warn(`rejecting language code not found in supportedLngs: ${o}`))};return qa(e)&&(e.indexOf("-")>-1||e.indexOf("_")>-1)?(this.options.load!=="languageOnly"&&s(this.formatLanguageCode(e)),this.options.load!=="languageOnly"&&this.options.load!=="currentOnly"&&s(this.getScriptPartFromCode(e)),this.options.load!=="currentOnly"&&s(this.getLanguagePartFromCode(e))):qa(e)&&s(this.formatLanguageCode(e)),n.forEach(o=>{i.indexOf(o)<0&&s(this.formatLanguageCode(o))}),i}}const Wq={zero:0,one:1,two:2,few:3,many:4,other:5},Kq={select:t=>t===1?"one":"other",resolvedOptions:()=>({pluralCategories:["one","other"]})};class Mme{constructor(e,a={}){this.languageUtils=e,this.options=a,this.logger=tu.create("pluralResolver"),this.pluralRulesCache={}}addRule(e,a){this.rules[e]=a}clearCache(){this.pluralRulesCache={}}getRule(e,a={}){const n=Lw(e==="dev"?"en":e),i=a.ordinal?"ordinal":"cardinal",s=JSON.stringify({cleanedCode:n,type:i});if(s in this.pluralRulesCache)return this.pluralRulesCache[s];let o;try{o=new Intl.PluralRules(n,{type:i})}catch{if(!Intl)return this.logger.error("No Intl support, please use an Intl polyfill!"),Kq;if(!e.match(/-|_/))return Kq;const c=this.languageUtils.getLanguagePartFromCode(e);o=this.getRule(c,a)}return this.pluralRulesCache[s]=o,o}needsPlural(e,a={}){let n=this.getRule(e,a);return n||(n=this.getRule("dev",a)),n?.resolvedOptions().pluralCategories.length>1}getPluralFormsOfKey(e,a,n={}){return this.getSuffixes(e,n).map(i=>`${a}${i}`)}getSuffixes(e,a={}){let n=this.getRule(e,a);return n||(n=this.getRule("dev",a)),n?n.resolvedOptions().pluralCategories.sort((i,s)=>Wq[i]-Wq[s]).map(i=>`${this.options.prepend}${a.ordinal?`ordinal${this.options.prepend}`:""}${i}`):[]}getSuffix(e,a,n={}){const i=this.getRule(e,n);return i?`${this.options.prepend}${n.ordinal?`ordinal${this.options.prepend}`:""}${i.select(a)}`:(this.logger.warn(`no plural rule found for: ${e}`),this.getSuffix("dev",a,n))}}const Yq=(t,e,a,n=".",i=!0)=>{let s=Sme(t,e,a);return!s&&i&&qa(a)&&(s=UL(t,a,n),s===void 0&&(s=UL(e,a,n))),s},uE=t=>t.replace(/\$/g,"$$$$");class Eme{constructor(e={}){this.logger=tu.create("interpolator"),this.options=e,this.format=e?.interpolation?.format||(a=>a),this.init(e)}init(e={}){e.interpolation||(e.interpolation={escapeValue:!0});const{escape:a,escapeValue:n,useRawValueToEscape:i,prefix:s,prefixEscaped:o,suffix:l,suffixEscaped:c,formatSeparator:d,unescapeSuffix:u,unescapePrefix:m,nestingPrefix:p,nestingPrefixEscaped:f,nestingSuffix:g,nestingSuffixEscaped:v,nestingOptionsSeparator:b,maxReplaces:x,alwaysFormat:S}=e.interpolation;this.escape=a!==void 0?a:_me,this.escapeValue=n!==void 0?n:!0,this.useRawValueToEscape=i!==void 0?i:!1,this.prefix=s?ex(s):o||"{{",this.suffix=l?ex(l):c||"}}",this.formatSeparator=d||",",this.unescapePrefix=u?"":m||"-",this.unescapeSuffix=this.unescapePrefix?"":u||"",this.nestingPrefix=p?ex(p):f||ex("$t("),this.nestingSuffix=g?ex(g):v||ex(")"),this.nestingOptionsSeparator=b||",",this.maxReplaces=x||1e3,this.alwaysFormat=S!==void 0?S:!1,this.resetRegExp()}reset(){this.options&&this.init(this.options)}resetRegExp(){const e=(a,n)=>a?.source===n?(a.lastIndex=0,a):new RegExp(n,"g");this.regexp=e(this.regexp,`${this.prefix}(.+?)${this.suffix}`),this.regexpUnescape=e(this.regexpUnescape,`${this.prefix}${this.unescapePrefix}(.+?)${this.unescapeSuffix}${this.suffix}`),this.nestingRegexp=e(this.nestingRegexp,`${this.nestingPrefix}((?:[^()"']+|"[^"]*"|'[^']*'|\\((?:[^()]|"[^"]*"|'[^']*')*\\))*?)${this.nestingSuffix}`)}interpolate(e,a,n,i){let s,o,l;const c=this.options&&this.options.interpolation&&this.options.interpolation.defaultVariables||{},d=f=>{if(f.indexOf(this.formatSeparator)<0){const x=Yq(a,c,f,this.options.keySeparator,this.options.ignoreJSONStructure);return this.alwaysFormat?this.format(x,void 0,n,{...i,...a,interpolationkey:f}):x}const g=f.split(this.formatSeparator),v=g.shift().trim(),b=g.join(this.formatSeparator).trim();return this.format(Yq(a,c,v,this.options.keySeparator,this.options.ignoreJSONStructure),b,n,{...i,...a,interpolationkey:v})};this.resetRegExp();const u=i?.missingInterpolationHandler||this.options.missingInterpolationHandler,m=i?.interpolation?.skipOnVariables!==void 0?i.interpolation.skipOnVariables:this.options.interpolation.skipOnVariables;return[{regex:this.regexpUnescape,safeValue:f=>uE(f)},{regex:this.regexp,safeValue:f=>this.escapeValue?uE(this.escape(f)):uE(f)}].forEach(f=>{for(l=0;s=f.regex.exec(e);){const g=s[1].trim();if(o=d(g),o===void 0)if(typeof u=="function"){const b=u(e,s,i);o=qa(b)?b:""}else if(i&&Object.prototype.hasOwnProperty.call(i,g))o="";else if(m){o=s[0];continue}else this.logger.warn(`missed to pass in variable ${g} for interpolating ${e}`),o="";else!qa(o)&&!this.useRawValueToEscape&&(o=Bq(o));const v=f.safeValue(o);if(e=e.replace(s[0],v),m?(f.regex.lastIndex+=o.length,f.regex.lastIndex-=s[0].length):f.regex.lastIndex=0,l++,l>=this.maxReplaces)break}}),e}nest(e,a,n={}){let i,s,o;const l=(c,d)=>{const u=this.nestingOptionsSeparator;if(c.indexOf(u)<0)return c;const m=c.split(new RegExp(`${u}[ ]*{`));let p=`{${m[1]}`;c=m[0],p=this.interpolate(p,o);const f=p.match(/'/g),g=p.match(/"/g);((f?.length??0)%2===0&&!g||g.length%2!==0)&&(p=p.replace(/'/g,'"'));try{o=JSON.parse(p),d&&(o={...d,...o})}catch(v){return this.logger.warn(`failed parsing options string in nesting for key ${c}`,v),`${c}${u}${p}`}return o.defaultValue&&o.defaultValue.indexOf(this.prefix)>-1&&delete o.defaultValue,c};for(;i=this.nestingRegexp.exec(e);){let c=[];o={...n},o=o.replace&&!qa(o.replace)?o.replace:o,o.applyPostProcessor=!1,delete o.defaultValue;const d=/{.*}/.test(i[1])?i[1].lastIndexOf("}")+1:i[1].indexOf(this.formatSeparator);if(d!==-1&&(c=i[1].slice(d).split(this.formatSeparator).map(u=>u.trim()).filter(Boolean),i[1]=i[1].slice(0,d)),s=a(l.call(this,i[1].trim(),o),o),s&&i[0]===e&&!qa(s))return s;qa(s)||(s=Bq(s)),s||(this.logger.warn(`missed to resolve ${i[1]} for nesting ${e}`),s=""),c.length&&(s=c.reduce((u,m)=>this.format(u,m,n.lng,{...n,interpolationkey:i[1].trim()}),s.trim())),e=e.replace(i[0],s),this.regexp.lastIndex=0}return e}}const Dme=t=>{let e=t.toLowerCase().trim();const a={};if(t.indexOf("(")>-1){const n=t.split("(");e=n[0].toLowerCase().trim();const i=n[1].substring(0,n[1].length-1);e==="currency"&&i.indexOf(":")<0?a.currency||(a.currency=i.trim()):e==="relativetime"&&i.indexOf(":")<0?a.range||(a.range=i.trim()):i.split(";").forEach(o=>{if(o){const[l,...c]=o.split(":"),d=c.join(":").trim().replace(/^'+|'+$/g,""),u=l.trim();a[u]||(a[u]=d),d==="false"&&(a[u]=!1),d==="true"&&(a[u]=!0),isNaN(d)||(a[u]=parseInt(d,10))}})}return{formatName:e,formatOptions:a}},Qq=t=>{const e={};return(a,n,i)=>{let s=i;i&&i.interpolationkey&&i.formatParams&&i.formatParams[i.interpolationkey]&&i[i.interpolationkey]&&(s={...s,[i.interpolationkey]:void 0});const o=n+JSON.stringify(s);let l=e[o];return l||(l=t(Lw(n),i),e[o]=l),l(a)}},Fme=t=>(e,a,n)=>t(Lw(a),n)(e);class Lme{constructor(e={}){this.logger=tu.create("formatter"),this.options=e,this.init(e)}init(e,a={interpolation:{}}){this.formatSeparator=a.interpolation.formatSeparator||",";const n=a.cacheInBuiltFormats?Qq:Fme;this.formats={number:n((i,s)=>{const o=new Intl.NumberFormat(i,{...s});return l=>o.format(l)}),currency:n((i,s)=>{const o=new Intl.NumberFormat(i,{...s,style:"currency"});return l=>o.format(l)}),datetime:n((i,s)=>{const o=new Intl.DateTimeFormat(i,{...s});return l=>o.format(l)}),relativetime:n((i,s)=>{const o=new Intl.RelativeTimeFormat(i,{...s});return l=>o.format(l,s.range||"day")}),list:n((i,s)=>{const o=new Intl.ListFormat(i,{...s});return l=>o.format(l)})}}add(e,a){this.formats[e.toLowerCase().trim()]=a}addCached(e,a){this.formats[e.toLowerCase().trim()]=Qq(a)}format(e,a,n,i={}){const s=a.split(this.formatSeparator);if(s.length>1&&s[0].indexOf("(")>1&&s[0].indexOf(")")<0&&s.find(l=>l.indexOf(")")>-1)){const l=s.findIndex(c=>c.indexOf(")")>-1);s[0]=[s[0],...s.splice(1,l)].join(this.formatSeparator)}return s.reduce((l,c)=>{const{formatName:d,formatOptions:u}=Dme(c);if(this.formats[d]){let m=l;try{const p=i?.formatParams?.[i.interpolationkey]||{},f=p.locale||p.lng||i.locale||i.lng||n;m=this.formats[d](l,f,{...u,...i,...p})}catch(p){this.logger.warn(p)}return m}else this.logger.warn(`there was no format function for ${d}`);return l},e)}}const Rme=(t,e)=>{t.pending[e]!==void 0&&(delete t.pending[e],t.pendingCount--)};class zme extends CT{constructor(e,a,n,i={}){super(),this.backend=e,this.store=a,this.services=n,this.languageUtils=n.languageUtils,this.options=i,this.logger=tu.create("backendConnector"),this.waitingReads=[],this.maxParallelReads=i.maxParallelReads||10,this.readingCalls=0,this.maxRetries=i.maxRetries>=0?i.maxRetries:5,this.retryTimeout=i.retryTimeout>=1?i.retryTimeout:350,this.state={},this.queue=[],this.backend?.init?.(n,i.backend,i)}queueLoad(e,a,n,i){const s={},o={},l={},c={};return e.forEach(d=>{let u=!0;a.forEach(m=>{const p=`${d}|${m}`;!n.reload&&this.store.hasResourceBundle(d,m)?this.state[p]=2:this.state[p]<0||(this.state[p]===1?o[p]===void 0&&(o[p]=!0):(this.state[p]=1,u=!1,o[p]===void 0&&(o[p]=!0),s[p]===void 0&&(s[p]=!0),c[m]===void 0&&(c[m]=!0)))}),u||(l[d]=!0)}),(Object.keys(s).length||Object.keys(o).length)&&this.queue.push({pending:o,pendingCount:Object.keys(o).length,loaded:{},errors:[],callback:i}),{toLoad:Object.keys(s),pending:Object.keys(o),toLoadLanguages:Object.keys(l),toLoadNamespaces:Object.keys(c)}}loaded(e,a,n){const i=e.split("|"),s=i[0],o=i[1];a&&this.emit("failedLoading",s,o,a),!a&&n&&this.store.addResourceBundle(s,o,n,void 0,void 0,{skipCopy:!0}),this.state[e]=a?-1:2,a&&n&&(this.state[e]=0);const l={};this.queue.forEach(c=>{wme(c.loaded,[s],o),Rme(c,e),a&&c.errors.push(a),c.pendingCount===0&&!c.done&&(Object.keys(c.loaded).forEach(d=>{l[d]||(l[d]={});const u=c.loaded[d];u.length&&u.forEach(m=>{l[d][m]===void 0&&(l[d][m]=!0)})}),c.done=!0,c.errors.length?c.callback(c.errors):c.callback())}),this.emit("loaded",l),this.queue=this.queue.filter(c=>!c.done)}read(e,a,n,i=0,s=this.retryTimeout,o){if(!e.length)return o(null,{});if(this.readingCalls>=this.maxParallelReads){this.waitingReads.push({lng:e,ns:a,fcName:n,tried:i,wait:s,callback:o});return}this.readingCalls++;const l=(d,u)=>{if(this.readingCalls--,this.waitingReads.length>0){const m=this.waitingReads.shift();this.read(m.lng,m.ns,m.fcName,m.tried,m.wait,m.callback)}if(d&&u&&i<this.maxRetries){setTimeout(()=>{this.read.call(this,e,a,n,i+1,s*2,o)},s);return}o(d,u)},c=this.backend[n].bind(this.backend);if(c.length===2){try{const d=c(e,a);d&&typeof d.then=="function"?d.then(u=>l(null,u)).catch(l):l(null,d)}catch(d){l(d)}return}return c(e,a,l)}prepareLoading(e,a,n={},i){if(!this.backend)return this.logger.warn("No backend was added via i18next.use. Will not load resources."),i&&i();qa(e)&&(e=this.languageUtils.toResolveHierarchy(e)),qa(a)&&(a=[a]);const s=this.queueLoad(e,a,n,i);if(!s.toLoad.length)return s.pending.length||i(),null;s.toLoad.forEach(o=>{this.loadOne(o)})}load(e,a,n){this.prepareLoading(e,a,{},n)}reload(e,a,n){this.prepareLoading(e,a,{reload:!0},n)}loadOne(e,a=""){const n=e.split("|"),i=n[0],s=n[1];this.read(i,s,"read",void 0,void 0,(o,l)=>{o&&this.logger.warn(`${a}loading namespace ${s} for language ${i} failed`,o),!o&&l&&this.logger.log(`${a}loaded namespace ${s} for language ${i}`,l),this.loaded(e,o,l)})}saveMissing(e,a,n,i,s,o={},l=()=>{}){if(this.services?.utils?.hasLoadedNamespace&&!this.services?.utils?.hasLoadedNamespace(a)){this.logger.warn(`did not save key "${n}" as the namespace "${a}" was not yet loaded`,"This means something IS WRONG in your setup. You access the t function before i18next.init / i18next.loadNamespace / i18next.changeLanguage was done. Wait for the callback or Promise to resolve before accessing it!!!");return}if(!(n==null||n==="")){if(this.backend?.create){const c={...o,isUpdate:s},d=this.backend.create.bind(this.backend);if(d.length<6)try{let u;d.length===5?u=d(e,a,n,i,c):u=d(e,a,n,i),u&&typeof u.then=="function"?u.then(m=>l(null,m)).catch(l):l(null,u)}catch(u){l(u)}else d(e,a,n,i,l,c)}!e||!e[0]||this.store.addResource(e[0],a,n,i)}}}const Xq=()=>({debug:!1,initAsync:!0,ns:["translation"],defaultNS:["translation"],fallbackLng:["dev"],fallbackNS:!1,supportedLngs:!1,nonExplicitSupportedLngs:!1,load:"all",preload:!1,simplifyPluralSuffix:!0,keySeparator:".",nsSeparator:":",pluralSeparator:"_",contextSeparator:"_",partialBundledLanguages:!1,saveMissing:!1,updateMissing:!1,saveMissingTo:"fallback",saveMissingPlurals:!0,missingKeyHandler:!1,missingInterpolationHandler:!1,postProcess:!1,postProcessPassResolved:!1,returnNull:!1,returnEmptyString:!0,returnObjects:!1,joinArrays:!1,returnedObjectHandler:!1,parseMissingKeyHandler:!1,appendNamespaceToMissingKey:!1,appendNamespaceToCIMode:!1,overloadTranslationOptionHandler:t=>{let e={};if(typeof t[1]=="object"&&(e=t[1]),qa(t[1])&&(e.defaultValue=t[1]),qa(t[2])&&(e.tDescription=t[2]),typeof t[2]=="object"||typeof t[3]=="object"){const a=t[3]||t[2];Object.keys(a).forEach(n=>{e[n]=a[n]})}return e},interpolation:{escapeValue:!0,format:t=>t,prefix:"{{",suffix:"}}",formatSeparator:",",unescapePrefix:"-",nestingPrefix:"$t(",nestingSuffix:")",nestingOptionsSeparator:",",maxReplaces:1e3,skipOnVariables:!0},cacheInBuiltFormats:!0}),Zq=t=>(qa(t.ns)&&(t.ns=[t.ns]),qa(t.fallbackLng)&&(t.fallbackLng=[t.fallbackLng]),qa(t.fallbackNS)&&(t.fallbackNS=[t.fallbackNS]),t.supportedLngs?.indexOf?.("cimode")<0&&(t.supportedLngs=t.supportedLngs.concat(["cimode"])),typeof t.initImmediate=="boolean"&&(t.initAsync=t.initImmediate),t),E_=()=>{},Ime=t=>{Object.getOwnPropertyNames(Object.getPrototypeOf(t)).forEach(a=>{typeof t[a]=="function"&&(t[a]=t[a].bind(t))})};class iw extends CT{constructor(e={},a){if(super(),this.options=Zq(e),this.services={},this.logger=tu,this.modules={external:[]},Ime(this),a&&!this.isInitialized&&!e.isClone){if(!this.options.initAsync)return this.init(e,a),this;setTimeout(()=>{this.init(e,a)},0)}}init(e={},a){this.isInitializing=!0,typeof e=="function"&&(a=e,e={}),e.defaultNS==null&&e.ns&&(qa(e.ns)?e.defaultNS=e.ns:e.ns.indexOf("translation")<0&&(e.defaultNS=e.ns[0]));const n=Xq();this.options={...n,...this.options,...Zq(e)},this.options.interpolation={...n.interpolation,...this.options.interpolation},e.keySeparator!==void 0&&(this.options.userDefinedKeySeparator=e.keySeparator),e.nsSeparator!==void 0&&(this.options.userDefinedNsSeparator=e.nsSeparator);const i=d=>d?typeof d=="function"?new d:d:null;if(!this.options.isClone){this.modules.logger?tu.init(i(this.modules.logger),this.options):tu.init(null,this.options);let d;this.modules.formatter?d=this.modules.formatter:d=Lme;const u=new Vq(this.options);this.store=new Gq(this.options.resources,this.options);const m=this.services;m.logger=tu,m.resourceStore=this.store,m.languageUtils=u,m.pluralResolver=new Mme(u,{prepend:this.options.pluralSeparator,simplifyPluralSuffix:this.options.simplifyPluralSuffix}),this.options.interpolation.format&&this.options.interpolation.format!==n.interpolation.format&&this.logger.deprecate("init: you are still using the legacy format function, please use the new approach: https://www.i18next.com/translation-function/formatting"),d&&(!this.options.interpolation.format||this.options.interpolation.format===n.interpolation.format)&&(m.formatter=i(d),m.formatter.init&&m.formatter.init(m,this.options),this.options.interpolation.format=m.formatter.format.bind(m.formatter)),m.interpolator=new Eme(this.options),m.utils={hasLoadedNamespace:this.hasLoadedNamespace.bind(this)},m.backendConnector=new zme(i(this.modules.backend),m.resourceStore,m,this.options),m.backendConnector.on("*",(f,...g)=>{this.emit(f,...g)}),this.modules.languageDetector&&(m.languageDetector=i(this.modules.languageDetector),m.languageDetector.init&&m.languageDetector.init(m,this.options.detection,this.options)),this.modules.i18nFormat&&(m.i18nFormat=i(this.modules.i18nFormat),m.i18nFormat.init&&m.i18nFormat.init(this)),this.translator=new rN(this.services,this.options),this.translator.on("*",(f,...g)=>{this.emit(f,...g)}),this.modules.external.forEach(f=>{f.init&&f.init(this)})}if(this.format=this.options.interpolation.format,a||(a=E_),this.options.fallbackLng&&!this.services.languageDetector&&!this.options.lng){const d=this.services.languageUtils.getFallbackCodes(this.options.fallbackLng);d.length>0&&d[0]!=="dev"&&(this.options.lng=d[0])}!this.services.languageDetector&&!this.options.lng&&this.logger.warn("init: no languageDetector is used and no lng is defined"),["getResource","hasResourceBundle","getResourceBundle","getDataByLanguage"].forEach(d=>{this[d]=(...u)=>this.store[d](...u)}),["addResource","addResources","addResourceBundle","removeResourceBundle"].forEach(d=>{this[d]=(...u)=>(this.store[d](...u),this)});const l=o0(),c=()=>{const d=(u,m)=>{this.isInitializing=!1,this.isInitialized&&!this.initializedStoreOnce&&this.logger.warn("init: i18next is already initialized. You should call init just once!"),this.isInitialized=!0,this.options.isClone||this.logger.log("initialized",this.options),this.emit("initialized",this.options),l.resolve(m),a(u,m)};if(this.languages&&!this.isInitialized)return d(null,this.t.bind(this));this.changeLanguage(this.options.lng,d)};return this.options.resources||!this.options.initAsync?c():setTimeout(c,0),l}loadResources(e,a=E_){let n=a;const i=qa(e)?e:this.language;if(typeof e=="function"&&(n=e),!this.options.resources||this.options.partialBundledLanguages){if(i?.toLowerCase()==="cimode"&&(!this.options.preload||this.options.preload.length===0))return n();const s=[],o=l=>{if(!l||l==="cimode")return;this.services.languageUtils.toResolveHierarchy(l).forEach(d=>{d!=="cimode"&&s.indexOf(d)<0&&s.push(d)})};i?o(i):this.services.languageUtils.getFallbackCodes(this.options.fallbackLng).forEach(c=>o(c)),this.options.preload?.forEach?.(l=>o(l)),this.services.backendConnector.load(s,this.options.ns,l=>{!l&&!this.resolvedLanguage&&this.language&&this.setResolvedLanguage(this.language),n(l)})}else n(null)}reloadResources(e,a,n){const i=o0();return typeof e=="function"&&(n=e,e=void 0),typeof a=="function"&&(n=a,a=void 0),e||(e=this.languages),a||(a=this.options.ns),n||(n=E_),this.services.backendConnector.reload(e,a,s=>{i.resolve(),n(s)}),i}use(e){if(!e)throw new Error("You are passing an undefined module! Please check the object you are passing to i18next.use()");if(!e.type)throw new Error("You are passing a wrong module! Please check the object you are passing to i18next.use()");return e.type==="backend"&&(this.modules.backend=e),(e.type==="logger"||e.log&&e.warn&&e.error)&&(this.modules.logger=e),e.type==="languageDetector"&&(this.modules.languageDetector=e),e.type==="i18nFormat"&&(this.modules.i18nFormat=e),e.type==="postProcessor"&&iZ.addPostProcessor(e),e.type==="formatter"&&(this.modules.formatter=e),e.type==="3rdParty"&&this.modules.external.push(e),this}setResolvedLanguage(e){if(!(!e||!this.languages)&&!(["cimode","dev"].indexOf(e)>-1)){for(let a=0;a<this.languages.length;a++){const n=this.languages[a];if(!(["cimode","dev"].indexOf(n)>-1)&&this.store.hasLanguageSomeTranslations(n)){this.resolvedLanguage=n;break}}!this.resolvedLanguage&&this.languages.indexOf(e)<0&&this.store.hasLanguageSomeTranslations(e)&&(this.resolvedLanguage=e,this.languages.unshift(e))}}changeLanguage(e,a){this.isLanguageChangingTo=e;const n=o0();this.emit("languageChanging",e);const i=l=>{this.language=l,this.languages=this.services.languageUtils.toResolveHierarchy(l),this.resolvedLanguage=void 0,this.setResolvedLanguage(l)},s=(l,c)=>{c?this.isLanguageChangingTo===e&&(i(c),this.translator.changeLanguage(c),this.isLanguageChangingTo=void 0,this.emit("languageChanged",c),this.logger.log("languageChanged",c)):this.isLanguageChangingTo=void 0,n.resolve((...d)=>this.t(...d)),a&&a(l,(...d)=>this.t(...d))},o=l=>{!e&&!l&&this.services.languageDetector&&(l=[]);const c=qa(l)?l:l&&l[0],d=this.store.hasLanguageSomeTranslations(c)?c:this.services.languageUtils.getBestMatchFromCodes(qa(l)?[l]:l);d&&(this.language||i(d),this.translator.language||this.translator.changeLanguage(d),this.services.languageDetector?.cacheUserLanguage?.(d)),this.loadResources(d,u=>{s(u,d)})};return!e&&this.services.languageDetector&&!this.services.languageDetector.async?o(this.services.languageDetector.detect()):!e&&this.services.languageDetector&&this.services.languageDetector.async?this.services.languageDetector.detect.length===0?this.services.languageDetector.detect().then(o):this.services.languageDetector.detect(o):o(e),n}getFixedT(e,a,n){const i=(s,o,...l)=>{let c;typeof o!="object"?c=this.options.overloadTranslationOptionHandler([s,o].concat(l)):c={...o},c.lng=c.lng||i.lng,c.lngs=c.lngs||i.lngs,c.ns=c.ns||i.ns,c.keyPrefix!==""&&(c.keyPrefix=c.keyPrefix||n||i.keyPrefix);const d=this.options.keySeparator||".";let u;return c.keyPrefix&&Array.isArray(s)?u=s.map(m=>(typeof m=="function"&&(m=HL(m,{...this.options,...o})),`${c.keyPrefix}${d}${m}`)):(typeof s=="function"&&(s=HL(s,{...this.options,...o})),u=c.keyPrefix?`${c.keyPrefix}${d}${s}`:s),this.t(u,c)};return qa(e)?i.lng=e:i.lngs=e,i.ns=a,i.keyPrefix=n,i}t(...e){return this.translator?.translate(...e)}exists(...e){return this.translator?.exists(...e)}setDefaultNamespace(e){this.options.defaultNS=e}hasLoadedNamespace(e,a={}){if(!this.isInitialized)return this.logger.warn("hasLoadedNamespace: i18next was not initialized",this.languages),!1;if(!this.languages||!this.languages.length)return this.logger.warn("hasLoadedNamespace: i18n.languages were undefined or empty",this.languages),!1;const n=a.lng||this.resolvedLanguage||this.languages[0],i=this.options?this.options.fallbackLng:!1,s=this.languages[this.languages.length-1];if(n.toLowerCase()==="cimode")return!0;const o=(l,c)=>{const d=this.services.backendConnector.state[`${l}|${c}`];return d===-1||d===0||d===2};if(a.precheck){const l=a.precheck(this,o);if(l!==void 0)return l}return!!(this.hasResourceBundle(n,e)||!this.services.backendConnector.backend||this.options.resources&&!this.options.partialBundledLanguages||o(n,e)&&(!i||o(s,e)))}loadNamespaces(e,a){const n=o0();return this.options.ns?(qa(e)&&(e=[e]),e.forEach(i=>{this.options.ns.indexOf(i)<0&&this.options.ns.push(i)}),this.loadResources(i=>{n.resolve(),a&&a(i)}),n):(a&&a(),Promise.resolve())}loadLanguages(e,a){const n=o0();qa(e)&&(e=[e]);const i=this.options.preload||[],s=e.filter(o=>i.indexOf(o)<0&&this.services.languageUtils.isSupportedCode(o));return s.length?(this.options.preload=i.concat(s),this.loadResources(o=>{n.resolve(),a&&a(o)}),n):(a&&a(),Promise.resolve())}dir(e){if(e||(e=this.resolvedLanguage||(this.languages?.length>0?this.languages[0]:this.language)),!e)return"rtl";try{const i=new Intl.Locale(e);if(i&&i.getTextInfo){const s=i.getTextInfo();if(s&&s.direction)return s.direction}}catch{}const a=["ar","shu","sqr","ssh","xaa","yhd","yud","aao","abh","abv","acm","acq","acw","acx","acy","adf","ads","aeb","aec","afb","ajp","apc","apd","arb","arq","ars","ary","arz","auz","avl","ayh","ayl","ayn","ayp","bbz","pga","he","iw","ps","pbt","pbu","pst","prp","prd","ug","ur","ydd","yds","yih","ji","yi","hbo","men","xmn","fa","jpr","peo","pes","prs","dv","sam","ckb"],n=this.services?.languageUtils||new Vq(Xq());return e.toLowerCase().indexOf("-latn")>1?"ltr":a.indexOf(n.getLanguagePartFromCode(e))>-1||e.toLowerCase().indexOf("-arab")>1?"rtl":"ltr"}static createInstance(e={},a){const n=new iw(e,a);return n.createInstance=iw.createInstance,n}cloneInstance(e={},a=E_){const n=e.forkResourceStore;n&&delete e.forkResourceStore;const i={...this.options,...e,isClone:!0},s=new iw(i);if((e.debug!==void 0||e.prefix!==void 0)&&(s.logger=s.logger.clone(e)),["store","services","language"].forEach(l=>{s[l]=this[l]}),s.services={...this.services},s.services.utils={hasLoadedNamespace:s.hasLoadedNamespace.bind(s)},n){const l=Object.keys(this.store.data).reduce((c,d)=>(c[d]={...this.store.data[d]},c[d]=Object.keys(c[d]).reduce((u,m)=>(u[m]={...c[d][m]},u),c[d]),c),{});s.store=new Gq(l,i),s.services.resourceStore=s.store}return s.translator=new rN(s.services,i),s.translator.on("*",(l,...c)=>{s.emit(l,...c)}),s.init(i,a),s.translator.options=i,s.translator.backendConnector.services.utils={hasLoadedNamespace:s.hasLoadedNamespace.bind(s)},s}toJSON(){return{options:this.options,store:this.store,language:this.language,languages:this.languages,resolvedLanguage:this.resolvedLanguage}}}const Ao=iw.createInstance();Ao.createInstance;Ao.dir;Ao.init;Ao.loadResources;Ao.reloadResources;Ao.use;Ao.changeLanguage;Ao.getFixedT;Ao.t;Ao.exists;Ao.setDefaultNamespace;Ao.hasLoadedNamespace;Ao.loadNamespaces;Ao.loadLanguages;const Ome=(t,e,a,n)=>{const i=[a,{code:e,...n||{}}];if(t?.services?.logger?.forward)return t.services.logger.forward(i,"warn","react-i18next::",!0);Lg(i[0])&&(i[0]=`react-i18next:: ${i[0]}`),t?.services?.logger?.warn?t.services.logger.warn(...i):console?.warn&&console.warn(...i)},Jq={},oZ=(t,e,a,n)=>{Lg(a)&&Jq[a]||(Lg(a)&&(Jq[a]=new Date),Ome(t,e,a,n))},lZ=(t,e)=>()=>{if(t.isInitialized)e();else{const a=()=>{setTimeout(()=>{t.off("initialized",a)},0),e()};t.on("initialized",a)}},qL=(t,e,a)=>{t.loadNamespaces(e,lZ(t,a))},e8=(t,e,a,n)=>{if(Lg(a)&&(a=[a]),t.options.preload&&t.options.preload.indexOf(e)>-1)return qL(t,a,n);a.forEach(i=>{t.options.ns.indexOf(i)<0&&t.options.ns.push(i)}),t.loadLanguages(e,lZ(t,n))},Bme=(t,e,a={})=>!e.languages||!e.languages.length?(oZ(e,"NO_LANGUAGES","i18n.languages were undefined or empty",{languages:e.languages}),!0):e.hasLoadedNamespace(t,{lng:a.lng,precheck:(n,i)=>{if(a.bindI18n&&a.bindI18n.indexOf("languageChanging")>-1&&n.services.backendConnector.backend&&n.isLanguageChangingTo&&!i(n.isLanguageChangingTo,t))return!1}}),Lg=t=>typeof t=="string",Ume=t=>typeof t=="object"&&t!==null,Hme=/&(?:amp|#38|lt|#60|gt|#62|apos|#39|quot|#34|nbsp|#160|copy|#169|reg|#174|hellip|#8230|#x2F|#47);/g,qme={"&amp;":"&","&#38;":"&","&lt;":"<","&#60;":"<","&gt;":">","&#62;":">","&apos;":"'","&#39;":"'","&quot;":'"',"&#34;":'"',"&nbsp;":" ","&#160;":" ","&copy;":"©","&#169;":"©","&reg;":"®","&#174;":"®","&hellip;":"…","&#8230;":"…","&#x2F;":"/","&#47;":"/"},Gme=t=>qme[t],$me=t=>t.replace(Hme,Gme);let GL={bindI18n:"languageChanged",bindI18nStore:"",transEmptyNodeValue:"",transSupportBasicHtmlNodes:!0,transWrapTextNodes:"",transKeepBasicHtmlNodesFor:["br","strong","i","p"],useSuspense:!0,unescape:$me,transDefaultProps:void 0};const Vme=(t={})=>{GL={...GL,...t}},Wme=()=>GL;let cZ;const Kme=t=>{cZ=t},Yme=()=>cZ,Qme={type:"3rdParty",init(t){Vme(t.options.react),Kme(t)}},Xme=y.createContext();class Zme{constructor(){this.usedNamespaces={}}addUsedNamespaces(e){e.forEach(a=>{this.usedNamespaces[a]||(this.usedNamespaces[a]=!0)})}getUsedNamespaces(){return Object.keys(this.usedNamespaces)}}var mE={exports:{}},pE={};var t8;function Jme(){if(t8)return pE;t8=1;var t=db();function e(m,p){return m===p&&(m!==0||1/m===1/p)||m!==m&&p!==p}var a=typeof Object.is=="function"?Object.is:e,n=t.useState,i=t.useEffect,s=t.useLayoutEffect,o=t.useDebugValue;function l(m,p){var f=p(),g=n({inst:{value:f,getSnapshot:p}}),v=g[0].inst,b=g[1];return s(function(){v.value=f,v.getSnapshot=p,c(v)&&b({inst:v})},[m,f,p]),i(function(){return c(v)&&b({inst:v}),m(function(){c(v)&&b({inst:v})})},[m]),o(f),f}function c(m){var p=m.getSnapshot;m=m.value;try{var f=p();return!a(m,f)}catch{return!0}}function d(m,p){return p()}var u=typeof window>"u"||typeof window.document>"u"||typeof window.document.createElement>"u"?d:l;return pE.useSyncExternalStore=t.useSyncExternalStore!==void 0?t.useSyncExternalStore:u,pE}var a8;function dZ(){return a8||(a8=1,mE.exports=Jme()),mE.exports}var gI=dZ();const epe=(t,e)=>Lg(e)?e:Ume(e)&&Lg(e.defaultValue)?e.defaultValue:Array.isArray(t)?t[t.length-1]:t,tpe={t:epe,ready:!1},ape=()=>()=>{},wt=(t,e={})=>{const{i18n:a}=e,{i18n:n,defaultNS:i}=y.useContext(Xme)||{},s=a||n||Yme();s&&!s.reportNamespaces&&(s.reportNamespaces=new Zme),s||oZ(s,"NO_I18NEXT_INSTANCE","useTranslation: You will need to pass in an i18next instance by using initReactI18next");const o=y.useMemo(()=>({...Wme(),...s?.options?.react,...e}),[s,e]),{useSuspense:l,keyPrefix:c}=o,d=i||s?.options?.defaultNS,u=Lg(d)?[d]:d||["translation"],m=y.useMemo(()=>u,u);s?.reportNamespaces?.addUsedNamespaces?.(m);const p=y.useRef(0),f=y.useCallback(P=>{if(!s)return ape;const{bindI18n:E,bindI18nStore:R}=o,O=()=>{p.current+=1,P()};return E&&s.on(E,O),R&&s.store.on(R,O),()=>{E&&E.split(" ").forEach(I=>s.off(I,O)),R&&R.split(" ").forEach(I=>s.store.off(I,O))}},[s,o]),g=y.useRef(),v=y.useCallback(()=>{if(!s)return tpe;const P=!!(s.isInitialized||s.initializedStoreOnce)&&m.every(Y=>Bme(Y,s,o)),E=e.lng||s.language,R=p.current,O=g.current;if(O&&O.ready===P&&O.lng===E&&O.keyPrefix===c&&O.revision===R)return O;const L={t:s.getFixedT(E,o.nsMode==="fallback"?m:m[0],c),ready:P,lng:E,keyPrefix:c,revision:R};return g.current=L,L},[s,m,c,o,e.lng]),[b,x]=y.useState(0),{t:S,ready:k}=gI.useSyncExternalStore(f,v,v);y.useEffect(()=>{if(s&&!k&&!l){const P=()=>x(E=>E+1);e.lng?e8(s,e.lng,m,P):qL(s,m,P)}},[s,e.lng,m,k,l,b]);const C=s||{},N=y.useRef(null),T=y.useRef(),j=P=>{const E=Object.getOwnPropertyDescriptors(P);E.__original&&delete E.__original;const R=Object.create(Object.getPrototypeOf(P),E);if(!Object.prototype.hasOwnProperty.call(R,"__original"))try{Object.defineProperty(R,"__original",{value:P,writable:!1,enumerable:!1,configurable:!1})}catch{}return R},D=y.useMemo(()=>{const P=C,E=P?.language;let R=P;P&&(N.current&&N.current.__original===P?T.current!==E?(R=j(P),N.current=R,T.current=E):R=N.current:(R=j(P),N.current=R,T.current=E));const O=[S,R,k];return O.t=S,O.i18n=R,O.ready=k,O},[S,C,k,C.resolvedLanguage,C.language,C.languages]);if(s&&l&&!k)throw new Promise(P=>{const E=()=>P();e.lng?e8(s,e.lng,m,E):qL(s,m,E)});return D},{slice:rpe,forEach:npe}=[];function ipe(t){return npe.call(rpe.call(arguments,1),e=>{if(e)for(const a in e)t[a]===void 0&&(t[a]=e[a])}),t}function spe(t){return typeof t!="string"?!1:[/<\s*script.*?>/i,/<\s*\/\s*script\s*>/i,/<\s*img.*?on\w+\s*=/i,/<\s*\w+\s*on\w+\s*=.*?>/i,/javascript\s*:/i,/vbscript\s*:/i,/expression\s*\(/i,/eval\s*\(/i,/alert\s*\(/i,/document\.cookie/i,/document\.write\s*\(/i,/window\.location/i,/innerHTML/i].some(a=>a.test(t))}const r8=/^[\u0009\u0020-\u007e\u0080-\u00ff]+$/,ope=function(t,e){const n=arguments.length>2&&arguments[2]!==void 0?arguments[2]:{path:"/"},i=encodeURIComponent(e);let s=`${t}=${i}`;if(n.maxAge>0){const o=n.maxAge-0;if(Number.isNaN(o))throw new Error("maxAge should be a Number");s+=`; Max-Age=${Math.floor(o)}`}if(n.domain){if(!r8.test(n.domain))throw new TypeError("option domain is invalid");s+=`; Domain=${n.domain}`}if(n.path){if(!r8.test(n.path))throw new TypeError("option path is invalid");s+=`; Path=${n.path}`}if(n.expires){if(typeof n.expires.toUTCString!="function")throw new TypeError("option expires is invalid");s+=`; Expires=${n.expires.toUTCString()}`}if(n.httpOnly&&(s+="; HttpOnly"),n.secure&&(s+="; Secure"),n.sameSite)switch(typeof n.sameSite=="string"?n.sameSite.toLowerCase():n.sameSite){case!0:s+="; SameSite=Strict";break;case"lax":s+="; SameSite=Lax";break;case"strict":s+="; SameSite=Strict";break;case"none":s+="; SameSite=None";break;default:throw new TypeError("option sameSite is invalid")}return n.partitioned&&(s+="; Partitioned"),s},n8={create(t,e,a,n){let i=arguments.length>4&&arguments[4]!==void 0?arguments[4]:{path:"/",sameSite:"strict"};a&&(i.expires=new Date,i.expires.setTime(i.expires.getTime()+a*60*1e3)),n&&(i.domain=n),document.cookie=ope(t,e,i)},read(t){const e=`${t}=`,a=document.cookie.split(";");for(let n=0;n<a.length;n++){let i=a[n];for(;i.charAt(0)===" ";)i=i.substring(1,i.length);if(i.indexOf(e)===0)return i.substring(e.length,i.length)}return null},remove(t,e){this.create(t,"",-1,e)}};var lpe={name:"cookie",lookup(t){let{lookupCookie:e}=t;if(e&&typeof document<"u")return n8.read(e)||void 0},cacheUserLanguage(t,e){let{lookupCookie:a,cookieMinutes:n,cookieDomain:i,cookieOptions:s}=e;a&&typeof document<"u"&&n8.create(a,t,n,i,s)}},cpe={name:"querystring",lookup(t){let{lookupQuerystring:e}=t,a;if(typeof window<"u"){let{search:n}=window.location;!window.location.search&&window.location.hash?.indexOf("?")>-1&&(n=window.location.hash.substring(window.location.hash.indexOf("?")));const s=n.substring(1).split("&");for(let o=0;o<s.length;o++){const l=s[o].indexOf("=");l>0&&s[o].substring(0,l)===e&&(a=s[o].substring(l+1))}}return a}},dpe={name:"hash",lookup(t){let{lookupHash:e,lookupFromHashIndex:a}=t,n;if(typeof window<"u"){const{hash:i}=window.location;if(i&&i.length>2){const s=i.substring(1);if(e){const o=s.split("&");for(let l=0;l<o.length;l++){const c=o[l].indexOf("=");c>0&&o[l].substring(0,c)===e&&(n=o[l].substring(c+1))}}if(n)return n;if(!n&&a>-1){const o=i.match(/\/([a-zA-Z-]*)/g);return Array.isArray(o)?o[typeof a=="number"?a:0]?.replace("/",""):void 0}}}return n}};let tx=null;const i8=()=>{if(tx!==null)return tx;try{if(tx=typeof window<"u"&&window.localStorage!==null,!tx)return!1;const t="i18next.translate.boo";window.localStorage.setItem(t,"foo"),window.localStorage.removeItem(t)}catch{tx=!1}return tx};var upe={name:"localStorage",lookup(t){let{lookupLocalStorage:e}=t;if(e&&i8())return window.localStorage.getItem(e)||void 0},cacheUserLanguage(t,e){let{lookupLocalStorage:a}=e;a&&i8()&&window.localStorage.setItem(a,t)}};let ax=null;const s8=()=>{if(ax!==null)return ax;try{if(ax=typeof window<"u"&&window.sessionStorage!==null,!ax)return!1;const t="i18next.translate.boo";window.sessionStorage.setItem(t,"foo"),window.sessionStorage.removeItem(t)}catch{ax=!1}return ax};var mpe={name:"sessionStorage",lookup(t){let{lookupSessionStorage:e}=t;if(e&&s8())return window.sessionStorage.getItem(e)||void 0},cacheUserLanguage(t,e){let{lookupSessionStorage:a}=e;a&&s8()&&window.sessionStorage.setItem(a,t)}},ppe={name:"navigator",lookup(t){const e=[];if(typeof navigator<"u"){const{languages:a,userLanguage:n,language:i}=navigator;if(a)for(let s=0;s<a.length;s++)e.push(a[s]);n&&e.push(n),i&&e.push(i)}return e.length>0?e:void 0}},hpe={name:"htmlTag",lookup(t){let{htmlTag:e}=t,a;const n=e||(typeof document<"u"?document.documentElement:null);return n&&typeof n.getAttribute=="function"&&(a=n.getAttribute("lang")),a}},fpe={name:"path",lookup(t){let{lookupFromPathIndex:e}=t;if(typeof window>"u")return;const a=window.location.pathname.match(/\/([a-zA-Z-]*)/g);return Array.isArray(a)?a[typeof e=="number"?e:0]?.replace("/",""):void 0}},gpe={name:"subdomain",lookup(t){let{lookupFromSubdomainIndex:e}=t;const a=typeof e=="number"?e+1:1,n=typeof window<"u"&&window.location?.hostname?.match(/^(\w{2,5})\.(([a-z0-9-]{1,63}\.[a-z]{2,6})|localhost)/i);if(n)return n[a]}};let uZ=!1;try{document.cookie,uZ=!0}catch{}const mZ=["querystring","cookie","localStorage","sessionStorage","navigator","htmlTag"];uZ||mZ.splice(1,1);const bpe=()=>({order:mZ,lookupQuerystring:"lng",lookupCookie:"i18next",lookupLocalStorage:"i18nextLng",lookupSessionStorage:"i18nextLng",caches:["localStorage"],excludeCacheFor:["cimode"],convertDetectedLanguage:t=>t});class pZ{constructor(e){let a=arguments.length>1&&arguments[1]!==void 0?arguments[1]:{};this.type="languageDetector",this.detectors={},this.init(e,a)}init(){let e=arguments.length>0&&arguments[0]!==void 0?arguments[0]:{languageUtils:{}},a=arguments.length>1&&arguments[1]!==void 0?arguments[1]:{},n=arguments.length>2&&arguments[2]!==void 0?arguments[2]:{};this.services=e,this.options=ipe(a,this.options||{},bpe()),typeof this.options.convertDetectedLanguage=="string"&&this.options.convertDetectedLanguage.indexOf("15897")>-1&&(this.options.convertDetectedLanguage=i=>i.replace("-","_")),this.options.lookupFromUrlIndex&&(this.options.lookupFromPathIndex=this.options.lookupFromUrlIndex),this.i18nOptions=n,this.addDetector(lpe),this.addDetector(cpe),this.addDetector(upe),this.addDetector(mpe),this.addDetector(ppe),this.addDetector(hpe),this.addDetector(fpe),this.addDetector(gpe),this.addDetector(dpe)}addDetector(e){return this.detectors[e.name]=e,this}detect(){let e=arguments.length>0&&arguments[0]!==void 0?arguments[0]:this.options.order,a=[];return e.forEach(n=>{if(this.detectors[n]){let i=this.detectors[n].lookup(this.options);i&&typeof i=="string"&&(i=[i]),i&&(a=a.concat(i))}}),a=a.filter(n=>n!=null&&!spe(n)).map(n=>this.options.convertDetectedLanguage(n)),this.services&&this.services.languageUtils&&this.services.languageUtils.getBestMatchFromCodes?a:a.length>0?a[0]:null}cacheUserLanguage(e){let a=arguments.length>1&&arguments[1]!==void 0?arguments[1]:this.options.caches;a&&(this.options.excludeCacheFor&&this.options.excludeCacheFor.indexOf(e)>-1||a.forEach(n=>{this.detectors[n]&&this.detectors[n].cacheUserLanguage(e,this.options)}))}}pZ.type="languageDetector";const xpe={nav:{printers:"Printers",archives:"Archives",queue:"Print Queue",stats:"Statistics",profiles:"Profiles",maintenance:"Maintenance",projects:"Projects",inventory:"Filament",files:"File Manager",makerworld:"MakerWorld",notifications:"Notifications",settings:"Settings",system:"System",collapseSidebar:"Collapse sidebar",expandSidebar:"Expand sidebar",update:"Update",updateAvailable:"Update available: v{{version}}",updateAvailableBanner:"Version {{version}} is available!",viewUpdate:"View update",viewOnGithub:"View on GitHub",keyboardShortcuts:"Keyboard shortcuts (?)",switchToLight:"Switch to light mode",switchToDark:"Switch to dark mode",switchToSystem:"Switch to system mode",smartSwitches:"Smart Switches",logout:"Logout",installApp:"Install app",installAppSuccess:"Bambuddy was installed"},common:{save:"Save",saving:"Saving...",cancel:"Cancel",delete:"Delete",edit:"Edit",add:"Add",close:"Close",confirm:"Confirm",loading:"Loading...",error:"Error",errorLoading:"Error loading data",retry:"Retry",success:"Success",warning:"Warning",enabled:"Enabled",disabled:"Disabled",yes:"Yes",no:"No",on:"On",off:"Off",all:"All",none:"None",search:"Search",filter:"Filter",sort:"Sort",refresh:"Refresh",download:"Download",upload:"Upload",uploading:"Uploading...",uploadFailed:"Upload failed",actions:"Actions",status:"Status",name:"Name",description:"Description",date:"Date",time:"Time",hours:"hours",minutes:"minutes",seconds:"seconds",days:"days",enable:"Enable",disable:"Disable",permissions:"Permissions",noPrinters:"No printers configured",noData:"No data available",linkNotFound:"Link not found",required:"Required",optional:"Optional",dismiss:"Dismiss",apply:"Apply",reset:"Reset",export:"Export",import:"Import",clear:"Clear",selectAll:"Select All",deselectAll:"Deselect All",noChange:"— No change —",unchanged:"Unchanged",unassigned:"Unassigned",unknown:"Unknown",unknownError:"Unknown error",today:"Today",tomorrow:"Tomorrow",asap:"ASAP",overdue:"Overdue",now:"Now",collapse:"Collapse",expand:"Expand",viewArchive:"View archive",viewInFileManager:"View in File Manager",addedBy:"Added by {{username}}",prints:"prints",more:"+{{count}} more",ascending:"Ascending",descending:"Descending",back:"Back",copy:"Copy",copied:"Copied!",printer:"Printer",remove:"Remove",type:"Type",print:"Print",rename:"Rename",move:"Move",create:"Create",duplicate:"Duplicate",left:"Left",right:"Right"},printers:{title:"Printers",addPrinter:"Add Printer",addPreflight:{checking:"Checking connection...",warning:"Some connection checks failed. This printer may show as offline. Review the checks below, fix what you can, or save anyway.",back:"Back",saveAnyway:"Save anyway"},editPrinter:"Edit Printer",deletePrinter:"Delete Printer",printerName:"Printer Name",serialNumber:"Serial Number",ipAddress:"IP Address / Hostname",accessCode:"Access Code",model:"Model",nozzleCount:"Nozzle Count",autoArchive:"Auto Archive",status:{available:"Available",idle:"Idle",printing:"Printing",paused:"Paused",offline:"Offline",problem:"Problem",error:"Error",finished:"Finished",unknown:"Unknown"},temperatures:{nozzle:"Nozzle",bed:"Bed",chamber:"Chamber"},progress:"{{percent}}% complete",timeRemaining:"{{time}} remaining",deleteConfirm:'Are you sure you want to delete "{{name}}"?',maintenanceOk:"Maintenance OK",maintenanceWarning:"{{count}} warning",maintenanceWarning_plural:"{{count}} warnings",maintenanceDue:"{{count}} due",maintenanceDue_plural:"{{count}} due",sort:{name:"Name",status:"Status",model:"Model",location:"Location",ascending:"Sort ascending",descending:"Sort descending"},cardSize:{small:"Small cards",medium:"Medium cards",large:"Large cards",extraLarge:"Extra large cards"},hideOffline:"Hide offline",nextAvailable:"Next available",powerOn:"Power On",offlinePrintersWithPlugs:"Offline printers with smart plugs",noPrintersConfigured:"No printers configured yet",search:"Search printers...",noSearchResults:"No printers match your search or filters",filter:{allStatuses:"All statuses",allLocations:"All locations"},toolbar:{filters:"Filters",view:"View",actions:"Actions"},readyToPrint:"Ready to print",external:"External",extL:"Ext-L",extR:"Ext-R",deleteArchives:"Delete print archives",noLabel:"No label",printPreview:"Print preview",width:"Width",height:"Height",noObjectsFound:"No objects found",objectsLoadedOnPrintStart:"Objects are loaded when a print starts",willBeSkipped:"Will be skipped",name:"Name",serialCannotBeChanged:"Serial number cannot be changed",locationHelp:"Used to group printers and filter queue jobs",wifiSignal:{veryWeak:"Very weak",weak:"Weak",fair:"Fair",good:"Good",excellent:"Excellent"},maintenanceUpToDate:"All maintenance up to date - Click to view",chamberLightOn:"Turn on chamber light",chamberLightOff:"Turn off chamber light",files:"Files",browseFiles:"Browse printer files",autoOffAfterPrint:"Auto power-off after print",autoOffExecuted:"Auto-off was executed - turn printer on to reset",hmsErrors:"HMS Errors",viewHmsErrors:"View {{count}} HMS error(s)",resume:"Resume",pause:"Pause",stop:"Stop",camera:"Camera",skipObject:"Skip Object",reconnect:"Reconnect",forceRefresh:"Force Refresh",forceRefreshSuccess:"Refresh requested",mqttDebug:"MQTT Debug",printerInformation:"Printer Information",copyToClipboard:"Copy",copied:"Copied!",state:"State",wifiSignalLabel:"WiFi Signal",developerMode:"Developer Mode",enabled:"Enabled",disabled:"Disabled",addedOn:"Added",sdCard:"SD Card",inserted:"Inserted",notInserted:"Not inserted",totalPrintHours:"Print Hours",activeNozzle:"Active: {{nozzle}} nozzle",nozzleRack:"Nozzle Rack",nozzleDocked:"Docked",nozzleMounted:"Mounted",nozzleActive:"Active",nozzleIdle:"Idle",nozzleDiameter:"Diameter",nozzleType:"Type",nozzleStatus:"Status",nozzleFilament:"Filament",nozzleWear:"Wear",nozzleMaxTemp:"Max Temp",nozzleSerial:"Serial",nozzleHardenedSteel:"Hardened Steel",nozzleStainlessSteel:"Stainless Steel",nozzleTungstenCarbide:"Tungsten Carbide",nozzleFlow:"Flow",nozzleHighFlow:"High Flow",nozzleStandardFlow:"Standard",firmwareUpdate:"Firmware Update",firmwareInstructions:"On the printer's touchscreen, go to",firmwareNav:"Navigate to",settings:"Settings",firmware:"Firmware",discoverPrinters:"Discover Printers",searching:"Searching...",manualEntry:"Manual Entry",addFromCloud:"Add from Cloud",toast:{printerDeleted:"Printer deleted",missingSpoolAssignment:"Print started on {{printer}}. Missing spool assignment for: {{slots}}",printerAdded:"Printer added",printerUpdated:"Printer updated",failedToDelete:"Failed to delete printer",failedToAdd:"Failed to add printer",connectionFailedNotAdded:"Could not connect to the printer. Verify the IP, serial number, and access code, and confirm LAN-only mode is on. The printer was not added.",failedToUpdate:"Failed to update printer",commandSent:"Command sent",failedToSendCommand:"Failed to send command",turnedOn:"{{name}} turned on",failedToPowerOn:"Failed to power on {{name}}",scriptTriggered:"Script triggered",printStopped:"Print stopped",printPaused:"Print paused",printResumed:"Print resumed",referenceDeleted:"Reference deleted",detectionAreaSaved:"Detection area saved",failedToRunScript:"Failed to run script",failedToStopPrint:"Failed to stop print",failedToPausePrint:"Failed to pause print",failedToResumePrint:"Failed to resume print",failedToControlChamberLight:"Failed to control chamber light",failedToSetSpeed:"Failed to set print speed",failedToUpdateSetting:"Failed to update setting",failedToSkipObjects:"Failed to skip objects",failedToRereadRfid:"Failed to re-read RFID",failedToCheckPlate:"Failed to check plate",failedToUpdateLabel:"Failed to update label",failedToDeleteReference:"Failed to delete reference",failedToSaveDetectionArea:"Failed to save detection area",plateCheckEnabled:"Plate check enabled",plateCheckDisabled:"Plate check disabled",calibrationSaved:"Calibration saved!",calibrationFailed:"Calibration failed",rfidRereadInitiated:"RFID re-read initiated",loadInitiated:"Loading filament…",unloadInitiated:"Unloading filament…",failedToLoad:"Failed to load filament",failedToUnload:"Failed to unload filament"},connection:{connected:"Connected",offline:"Offline"},plateStatus:{markCleared:"Mark plate as cleared",cleared:"Plate Clear",notCleared:"Plate not Clear",inUse:"Plate in Use"},queue:{inQueue:"{{count}} print in queue",inQueue_plural:"{{count}} prints in queue"},controls:"Controls",rfid:{reread:"Re-read RFID"},ams:{load:"Load",unload:"Unload"},bedJog:{title:"Move build plate",bed:"Bed",step:"Step (mm)",up:"Move plate up",down:"Move plate down",disabledWhilePrinting:"Disabled while printing",notHomedTitle:"Printer is not homed",notHomedMessage:"The printer has not been homed since the last print. Run auto-home first for safe positioning (parks the toolhead, then homes X, Y, and Z), or move anyway — soft endstops will be bypassed.",homeZ:"Auto Home",moveAnyway:"Move anyway",homingStarted:"Auto-homing printer…"},permission:{noAdd:"You do not have permission to add printers",noEdit:"You do not have permission to edit printers",noDelete:"You do not have permission to delete printers",noControl:"You do not have permission to control printers",noFiles:"You do not have permission to access printer files",noAmsRfid:"You do not have permission to re-read AMS RFID",noSmartPlugControl:"You do not have permission to control smart plugs",noCamera:"You do not have permission to view cameras"},modal:{addTitle:"Add Printer",editTitle:"Edit Printer",myPrinter:"My Printer",selectModel:"Select model...",locationGroup:"Location / Group (optional)",locationPlaceholder:"e.g., Workshop, Office, Basement",autoArchiveLabel:"Auto-archive completed prints",fromPrinterSettings:"From printer settings",modelOptional:"Model (optional)",saveChanges:"Save Changes"},skipObjects:{tooltip:"Skip objects",onlyWhilePrinting:"Skip objects (only while printing)",requiresMultiple:"Skip objects (requires 2+ objects)",title:"Skip Objects",matchIdsInfo:"Match IDs with your printer display",printerShowsIds:"The printer screen shows object IDs on the build plate",skipSelected:"Skip Selected",skipping:"Skipping...",noObjectsSelected:"No objects selected",selectObjectsToSkip:"Select objects you want to skip from the current print",skipped:"skipped",objectsSkipped:"Objects skipped",activeCount:"{{count}} active",waitForLayer:"Wait for layer 2+ to skip objects (currently layer {{layer}})",skip:"Skip",confirmTitle:"Skip Object?",confirmMessage:'Are you sure you want to skip "{{name}}"? This cannot be undone.'},confirm:{deleteTitle:"Delete Printer",deleteMessage:'Are you sure you want to delete "{{name}}"? This will remove all connection settings.',deleteArchivesNote:"All print history for this printer will be permanently deleted.",keepArchivesNote:"Print history will be kept but no longer associated with this printer.",stopTitle:"Stop Print",stopMessage:'Are you sure you want to stop the current print on "{{name}}"? This will cancel the print job.',stopButton:"Stop Print",pauseTitle:"Pause Print",pauseMessage:'Are you sure you want to pause the current print on "{{name}}"?',pauseButton:"Pause Print",resumeTitle:"Resume Print",resumeMessage:'Are you sure you want to resume the print on "{{name}}"?',resumeButton:"Resume Print",powerOnTitle:"Power On Printer",powerOnMessage:'Are you sure you want to turn ON the power for "{{name}}"?',powerOnButton:"Power On",powerOffTitle:"Power Off Printer",powerOffMessage:'Are you sure you want to turn OFF the power for "{{name}}"?',powerOffWarning:'WARNING: "{{name}}" is currently printing! Are you sure you want to turn OFF the power? This will interrupt the print and may damage the printer.',powerOffButton:"Power Off",haToggleTitle:'Toggle "{{name}}"',haToggleMessage:"Toggle the Home Assistant entity {{entity}}? This may turn power off if it is currently on.",haToggleWarning:'WARNING: "{{name}}" is currently printing! Toggling {{entity}} may cut power and interrupt the print. Continue?',haToggleButton:"Toggle"},bulk:{select:"Select",selectAll:"Select All",selectByLocation:"Select by Location",selected:"{{count}} selected",actions:{stop:"Stop",pause:"Pause",resume:"Resume",clearPlate:"Clear Bed",clearHMS:"Clear Notifications"},confirm:{stopTitle:"Stop {{count}} Prints",stopMessage:"This will cancel active prints on {{count}} printer(s). This action cannot be undone.",stopButton:"Stop All",pauseTitle:"Pause {{count}} Prints",pauseMessage:"This will pause active prints on {{count}} printer(s).",pauseButton:"Pause All",clearPlateTitle:"Clear {{count}} Print Beds",clearPlateMessage:"This will clear the print bed on {{count}} printer(s) and may trigger queued jobs.",clearPlateButton:"Clear All"},success:"{{action}} completed on {{count}} printer(s)",partial:"{{succeeded}} succeeded, {{failed}} failed",noneApplicable:"No selected printers are in the right state for this action",selectByState:"Select by State"},discovery:{title:"Discover Printers",searching:"Searching...",scanning:"Scanning...",scanProgress:"Scanning... {{scanned}}/{{total}}",foundPrinters:"Found {{count}} printer(s)",noPrintersFound:"No printers found",noPrintersFoundSubnet:"No printers found in the specified subnet.",noPrintersFoundNetwork:"No printers found on the network.",allConfigured:"All discovered printers are already configured.",alreadyAdded:"Already added",select:"Select",manualEntry:"Manual Entry",addFromCloud:"Add from Cloud",subnetToScan:"Subnet to scan",dockerNote:"Docker detected. Enter your printer's subnet in CIDR notation. Requires network_mode: host in docker-compose.yml.",scanSubnet:"Scan Subnet for Printers",discoverNetwork:"Discover Printers on Network",scanningSubnet:"Scanning subnet for Bambu printers...",scanningNetwork:"Scanning network...",serialRequired:"Serial required",unknown:"Unknown",failedToStart:"Failed to start discovery",customSubnetOption:"Custom subnet...",customSubnetLabel:"Custom subnet (CIDR)",customSubnetNote:"Use a custom subnet if your printer is on a different network than this server. The FTP (990) and MQTT (8883) ports must be reachable across the routing boundary."},drying:{start:"Start Drying",stop:"Stop Drying",temperature:"Temperature",duration:"Duration",hours:"hours",timeRemaining:"{{time}} left",active:"Drying",notSupported:"Drying not supported",powerRequired:"Connect AMS power adapter to enable drying",startingDrying:"Starting drying...",stoppingDrying:"Stopping drying...",rotateTray:"Rotate spool during drying"},filaments:"Filaments",openCameraOverlay:"Open camera overlay",openCameraWindow:"Open camera in new window",firmwareUpdateAvailable:"Firmware update available: {{current}} → {{latest}}",firmwareUpToDate:"Firmware {{version}} — Up to date",firmwareUpdateButton:"Update",plateDetection:{noPermission:"You do not have permission to update printers",enabledClick:"Plate check enabled - Click to disable",disabledClick:"Plate check disabled - Click to enable",manageCalibration:"Manage plate detection calibration",calibrationRequired:"Calibration Required",calibrationInstructions:"Please ensure the build plate is <strong>completely empty</strong>, then click Calibrate.",calibrationDescription:"Calibration captures a reference image of the empty plate. Future checks will compare against this reference to detect objects.",calibrationTip:"<strong>Tip:</strong> You can store up to 5 calibrations for different plates. The system automatically uses the best match when checking.",plateEmpty:"Plate appears empty",objectsDetected:"Objects detected on plate",confidence:"Confidence",difference:"Difference",analysisPreview:"Analysis preview:",analysisLegend:"Green box = detection area, Red overlay = differences from calibration",savedReferences:"Saved References ({{count}}/{{max}})",deleteReference:"Delete reference",labelPlaceholder:"Label...",clickToEdit:"{{label}} - Click to edit",clickToAddLabel:"Click to add label"},speed:{title:"Print Speed",silent:"Silent (50%)",standard:"Standard (100%)",sport:"Sport (124%)",ludicrous:"Ludicrous (166%)"},airduct:{title:"Airduct Mode",cooling:"Cooling",heating:"Heating"},noSdCard:"No SD",door:{open:"Open",closed:"Closed"},fans:{partCooling:"Part Cooling Fan",auxiliary:"Auxiliary Fan",chamber:"Chamber Fan"},clickToViewHmsErrors:"Click to view HMS errors",estimatedCompletion:"Estimated completion time",plateNumber:"Plate {{number}}",slotOptions:"Slot options",amsPopup:{friendlyName:"AMS Name",friendlyNamePlaceholder:"e.g. AMS Friendly Name",serialNumber:"Serial Number",firmwareVersion:"Firmware",save:"Save",clear:"Clear",noEditPermission:"You do not have permission to rename AMS units"},firmwareModal:{title:"Firmware Update",titleUpToDate:"Firmware Info",currentVersion:"Current:",latestVersion:"Latest:",releaseNotes:"Release Notes",checkingPrereqs:"Checking prerequisites...",sdCardReady:"SD card ready. Click below to upload firmware.",uploadedSuccess:"Firmware uploaded to SD card!",applyInstructions:"To apply the update on your printer:",step1:"On the printer's touchscreen, go to <strong>Settings</strong>",step2:"Navigate to <strong>Firmware</strong>",step3:"Select <strong>Update from SD card</strong>",step4:"The update will take 10-20 minutes",done:"Done",starting:"Starting...",uploadFirmware:"Upload Firmware",uploadFailed:"Failed to start upload: {{error}}",uploadedToast:"Firmware uploaded! Trigger update from printer screen.",availableVersions:"Available versions",usable:"Usable",unavailable:"Unavailable",installed:"Installed",newerBadge:"newer",olderBadge:"older",currentBadge:"current"},accessCodePlaceholder:"Leave empty to keep current",roi:{title:"Detection Area (ROI)",xStart:"X Start",yStart:"Y Start",width:"Width",height:"Height",instruction:"Adjust the detection area to focus on the build plate. The green box in the preview shows the current area."},developerModeWarning:"Developer LAN mode is not enabled on: {{names}}. Some features may not work.",howToEnable:"How to enable",incompatibleFile:"This file was sliced for {{slicedFor}}, but this printer is a {{printerModel}}",dropNotPrintable:"Only .gcode and .gcode.3mf files can be printed",dropToPrint:"Drop to print",cannotPrint:"Printer busy"},archives:{title:"Print Archives",searchPlaceholder:"Search archives...",filterByPrinter:"Filter by printer",filterByStatus:"Filter by status",sortBy:"Sort by",sortNewest:"Newest first",sortOldest:"Oldest first",sortName:"Name",sortDuration:"Duration",sortLargest:"Largest first",sortSmallest:"Smallest first",sortSize:"Size",noArchives:"No archives found",noArchivesSearch:"No archives match your search",originalPrintNotVisible:"Original print not visible - try clearing filters",noArchivesYet:"No archives yet",prints:"prints",pagination:{showing:"Showing",to:"to",of:"of",show:"Show",page:"Page",all:"All"},loadingArchives:"Loading archives...",releaseToUpload:"Release to upload",showAll:"Show all",showFavoritesOnly:"Show favorites only",gridView:"Grid view",listView:"List view",calendarView:"Calendar view",logView:"Print Log",manageTags:"Manage Tags",showFailedPrints:"Show failed prints",hideFailedPrints:"Hide failed prints",hideDuplicates:"Hide Duplicates",viewOriginalPrint:"Click to view original print (#{{id}})",printTime:"Print Time",filamentUsed:"Filament Used",cost:"Cost",reprint:"Reprint",preview:"Preview",deleteArchive:"Delete Archive",deleteConfirm:"Are you sure you want to delete this archive?",favorite:"Favorite",unfavorite:"Remove from favorites",viewDetails:"View Details",status:{completed:"Completed",failed:"Failed",stopped:"Stopped"},toast:{source3mfAttached:"Source 3MF attached: {{filename}}",failedUploadSource3mf:"Failed to upload source 3MF",source3mfRemoved:"Source 3MF removed",failedRemoveSource3mf:"Failed to remove source 3MF",f3dAttached:"F3D attached: {{filename}}",failedUploadF3d:"Failed to upload F3D",f3dRemoved:"F3D removed",failedRemoveF3d:"Failed to remove F3D",timelapseAttached:"Timelapse attached: {{filename}}",timelapseAlreadyAttached:"Timelapse already attached",noMatchingTimelapse:"No matching timelapse found",failedScanTimelapse:"Failed to scan for timelapse",failedAttachTimelapse:"Failed to attach timelapse",timelapseRemoved:"Timelapse removed",failedRemoveTimelapse:"Failed to remove timelapse",timelapseUploaded:"Timelapse uploaded: {{filename}}",failedUploadTimelapse:"Failed to upload timelapse",archiveDeleted:"Archive deleted",failedDeleteArchive:"Failed to delete archive",addedToFavorites:"Added to favorites",removedFromFavorites:"Removed from favorites",projectUpdated:"Project updated",failedUpdateProject:"Failed to update project",linkCopied:"Link copied to clipboard",failedCopyLink:"Failed to copy link",photoDeleted:"Photo deleted",failedDeletePhoto:"Failed to delete photo",failedDeleteArchives:"Failed to delete archives",failedUpdateFavorites:"Failed to update favorites",exportDownloaded:"Export downloaded",exportFailed:"Export failed"},menu:{print:"Print",schedule:"Schedule",openInBambuStudio:"Open in Slicer",slice:"Slice",externalLink:"External Link",viewOnMakerWorld:"View on MakerWorld",preview3d:"3D Preview",viewTimelapse:"View Timelapse",scanForTimelapse:"Scan for Timelapse",uploadTimelapse:"Upload Timelapse",removeTimelapse:"Remove Timelapse",downloadSource3mf:"Download Source 3MF",uploadSource3mf:"Upload Source 3MF",replaceSource3mf:"Replace Source 3MF",removeSource3mf:"Remove Source 3MF",uploadF3d:"Upload F3D",replaceF3d:"Replace F3D",downloadF3d:"Download F3D",removeF3d:"Remove F3D",download:"Download",copyDownloadLink:"Copy Download Link",qrCode:"QR Code",viewPhotos:"View Photos",viewPhotosCount:"View Photos ({{count}})",projectPage:"Project Page",addToFavorites:"Add to Favorites",removeFromFavorites:"Remove from Favorites",edit:"Edit",printLog:"Print Log",goToProject:"Go to Project: {{name}}",addToProject:"Add to Project",removeFromProject:"Remove from Project",loading:"Loading...",noProjectsAvailable:"No projects available",searchProjects:"Search projects…",select:"Select",deselect:"Deselect",delete:"Delete"},permission:{noReprint:"You do not have permission to reprint this archive",noAddToQueue:"You do not have permission to add to queue",noUpdateArchives:"You do not have permission to update archives",noUploadFiles:"You do not have permission to upload files",noDownload:"You do not have permission to download archives",noCopyLink:"You do not have permission to copy download links",noDelete:"You do not have permission to delete this archive",noCreate:"You do not have permission to create archives"},platePicker:{title:"Select plate to preview",hint:"This archive has multiple plates. Pick one to open in the GCode viewer.",plateLabel:"Plate {{index}}",objectCount:"{{count}} object",objectCount_plural:"{{count}} objects",noGcode:"This archive has no sliced G-code to preview. Open it in Bambu Studio to slice first."},card:{previousPlate:"Previous plate",nextPlate:"Next plate",plateNumber:"Plate {{index}}",moreOptions:"Right-click for more options",addToFavorites:"Add to favorites",removeFromFavorites:"Remove from favorites",cancelled:"cancelled",failed:"failed",duplicate:"duplicate",duplicateTitle:"This model has been printed before",openSource3mf:"Open source 3MF in Bambu Studio (right-click for more options)",downloadF3d:"Download Fusion 360 design file",viewTimelapse:"View timelapse",viewPhoto:"View 1 photo",viewPhotos:"View {{count}} photos",openFolder:"Open folder: {{name}}",slicedFile:"Sliced file - ready to print",sourceFile:"Source file only - no AMS mapping available",gcode:"GCODE",source:"SOURCE",project:"Project: {{name}}",runsBadge:"{{count}} prints",runsBadgeTitle:"{{count}} prints total — {{successful}} successful, {{failed}} failed. Click to see the full print log.",estimated:"Estimated: {{time}}",actual:"Actual: {{time}}",accuracy:"Accuracy: {{percent}}%",filament:"{{weight}}g",layer:"{{count}} layer",layers:"{{count}} layers",object:"{{count}} object",objects:"{{count}} objects",slicedFor:"Sliced for {{model}}",uploadedBy:"Uploaded By",noPermissionReprint:"You do not have permission to reprint",noFileForReprint:"No 3MF file available — the file could not be downloaded from the printer when the print was recorded",noPermissionEdit:"You do not have permission to edit archives",noPermissionDelete:"You do not have permission to delete archives",reprint:"Reprint",schedulePrint:"Schedule Print",schedule:"Schedule",openInBambuStudio:"Open in Slicer",openInBambuStudioToSlice:"Open in Slicer to slice",slice:"Slice",externalLink:"External Link",makerWorld:"MakerWorld: {{designer}}",viewProject:"View project",noExternalLink:"No external link",preview3d:"3D Preview",download:"Download",edit:"Edit",delete:"Delete"},runLog:{title:"Print Log",modalTitle:"Print Log — {{name}}",modalTitleFallback:"this archive",empty:"No print events recorded for this archive yet.",col:{date:"Date",status:"Status",duration:"Duration",filament:"Filament",cost:"Cost"},status:{completed:"Completed",failed:"Failed",cancelled:"Cancelled",stopped:"Stopped",skipped:"Skipped",printing:"Printing"}},modal:{deleteArchive:"Delete Archive",deleteConfirm:'Are you sure you want to delete "{{name}}"? This action cannot be undone.',deleteButton:"Delete",deletePurgeStats:"Also remove this print from Quick Stats (filament, time, cost, energy)",removeSource3mf:"Remove Source 3MF",removeSource3mfConfirm:'Are you sure you want to remove the source 3MF file from "{{name}}"? This will delete the original slicer project file.',removeButton:"Remove",removeF3d:"Remove F3D",removeF3dConfirm:'Are you sure you want to remove the Fusion 360 design file from "{{name}}"?',removeTimelapse:"Remove Timelapse",removeTimelapseConfirm:'Are you sure you want to remove the timelapse video from "{{name}}"?',timelapse:"{{name}} - Timelapse",selectTimelapse:"Select Timelapse",selectTimelapseDesc:"No auto-match found. Select the timelapse for this print:",deleteArchives:"Delete Archives",deleteArchivesConfirm:"Are you sure you want to delete {{count}} archive(s)? This action cannot be undone.",deleteCount:"Delete {{count}}"},page:{title:"Archives",printsCount:"{{filtered}} of {{total}} prints",dropFilesHere:"Drop .3mf files here",releaseToUpload:"Release to upload",only3mfSupported:"Only .3mf files are supported",close:"Close",selected:"{{count}} selected",selectAll:"Select All",tags:"Tags",project:"Project",favorite:"Favorite",delete:"Delete",toggledFavorites:"Toggled favorites for {{count}} archive(s)",failedUpdateFavorites:"Failed to update favorites",archivesDeleted:"{{count}} archive(s) deleted",failedDeleteArchives:"Failed to delete archives",photoDeleted:"Photo deleted",failedDeletePhoto:"Failed to delete photo"},list:{name:"Name",printer:"Printer",date:"Date",size:"Size",actions:"Actions",hasTimelapse:"Has timelapse"},log:{date:"Date",printName:"Print Name",printer:"Printer",user:"User",status:"Status",duration:"Duration",filament:"Filament",allPrinters:"All Printers",allUsers:"All Users",allStatuses:"All Statuses",cancelled:"Cancelled",skipped:"Skipped",dateFrom:"From",dateTo:"To",noEntries:"No print log entries found",showing:"Showing {{count}} of {{total}} entries",rowsPerPage:"Rows",page:"Page",prev:"Prev",next:"Next",clearLog:"Clear Log",clearLogTitle:"Clear Print Log",clearLogConfirm:"All print log entries will be permanently deleted. Archives and queue items are not affected. This action cannot be undone. Are you sure?",clearLogButton:"Clear All",cleared:"{{count}} log entries cleared",clearFailed:"Failed to clear print log"}},queue:{title:"Print Queue",subtitle:"Schedule and manage your print jobs",addToQueue:"Add to Queue",filamentShort:{rowBadge:"Insufficient filament for the assigned spool",rowTooltip:"The dispatch scheduler flagged this item. Click Play to see the per-slot deficit and decide whether to print anyway.",confirmTitle:"Insufficient filament",confirmIntro:"The assigned spool cannot satisfy at least one slot. Print anyway?",lineItem:"Slot {{slot}}: needs {{required}} g, {{remaining}} g remaining",unknown:"unknown",printAnyway:"Print Anyway"},print:"Print",reprint:"Re-print",schedulePrint:"Schedule Print",editQueueItem:"Edit Queue Item",printToPrinters:"Print to {{count}} Printers",queueToPrinters:"Queue to {{count}} Printers",queueSelectedPlates:"Queue {{count}} Plates",selectAllPlates:"Select All {{count}} Plates",deselectAll:"Deselect All",printQueued:"Print queued",itemsQueued:"{{count}} items queued",sending:"Sending...",sendingProgress:"Sending {{current}}/{{total}}...",adding:"Adding...",addingProgress:"Adding {{current}}/{{total}}...",savingProgress:"Saving {{current}}/{{total}}...",clearQueue:"Clear Queue",clearHistory:"Clear History",emptyQueue:"Queue is empty",position:"Position",scheduledTime:"Scheduled Time",moveUp:"Move Up",moveDown:"Move Down",startNow:"Start Now",printingInProgress:"Printing in progress...",viewArchive:"View archive",viewInFileManager:"View in File Manager",itemCount:"{{count}} item",itemCount_plural:"{{count}} items",dragToReorder:"Drag to reorder (ASAP only)",reorderHint:"Position only affects ASAP items. Scheduled items run at their set time.",sjf:{label:"SJF",tooltip:"Shortest Job First — scheduler prioritizes shorter prints"},addedBy:"Added by {{name}}",nextInQueue:"Next in queue",clearPlateSuccess:"Plate cleared — ready for next print",plateNumber:"Plate {{index}}",quantity:"Quantity",quantityHint:"Creates {{count}} queue items",activeBatches:"Active Batches",batchProgress:"{{completed}} of {{total}} completed",cancelBatch:"Cancel Remaining",batchCancelled:"Remaining batch items cancelled",cancelBatchConfirmTitle:"Cancel Batch",cancelBatchConfirmMessage:"Cancel all remaining pending items in this batch?",batch:"Batch",sections:{currentlyPrinting:"Currently Printing",queued:"Queued",history:"History"},status:{pending:"Pending",waiting:"Waiting",printing:"Printing",paused:"Paused",completed:"Completed",failed:"Failed",skipped:"Skipped",cancelled:"Cancelled"},summary:{printing:"Printing",queued:"Queued",totalTime:"Total Queue Time",totalWeight:"Total Queue Weight",history:"History"},filter:{allPrinters:"All Printers",unassigned:"Unassigned",allStatus:"All Status",allLocations:"All Locations",any:"Any"},sort:{byPosition:"Sort by Position",byName:"Sort by Name",byPrinter:"Sort by Printer",bySchedule:"Sort by Schedule",byDate:"Sort by Date",ascendingOldest:"Ascending (oldest first)",descendingNewest:"Descending (newest first)"},badges:{staged:"Staged",requiresPrevious:"Requires previous success",autoPowerOff:"Auto power off",gcodeInjection:"G-code"},empty:{title:"No prints scheduled",description:'Schedule a print from the Archives page using the "Schedule" option in the context menu, or drag and drop files to get started.'},time:{asap:"ASAP",overdue:"Overdue",now:"Now",lessThanMinute:"In less than a minute",inMinutes:"In {{count}} min",inHours:"In {{count}} hours"},actions:{stopPrint:"Stop Print",startPrint:"Start Print",requeue:"Re-queue"},bulkEdit:{title:"Edit {{count}} Item",title_plural:"Edit {{count}} Items",description:"Only changed settings will be applied to selected items.",printer:"Printer",noChange:"— No change —",queueOptions:"Queue Options",staged:"Staged (manual start)",autoPowerOff:"Auto power off after print",requirePrevious:"Require previous success",printOptions:"Print Options",bedLevelling:"Bed levelling",flowCalibration:"Flow calibration",vibrationCalibration:"Vibration calibration",layerInspection:"First layer inspection",timelapse:"Timelapse",useAms:"Use AMS",applyChanges:"Apply Changes",selectAll:"Select All",deselectAll:"Deselect All",selected:"{{count}} selected",editSelected:"Edit Selected",cancelSelected:"Cancel Selected"},confirm:{cancelTitle:"Cancel Scheduled Print",cancelMessage:'Are you sure you want to cancel "{{name}}"?',stopTitle:"Stop Print",stopMessage:'Are you sure you want to stop the current print "{{name}}"? This will cancel the print job on the printer.',removeTitle:"Remove from History",removeMessage:'Are you sure you want to remove "{{name}}" from the queue history?',clearHistoryTitle:"Clear History",clearHistoryMessage:"Are you sure you want to remove all {{count}} item(s) from the history?",cancelButton:"Cancel Print",stopButton:"Stop Print",thisPrint:"this print",thisItem:"this item"},toast:{cancelled:"Queue item cancelled",cancelFailed:"Failed to cancel item",removed:"Queue item removed",removeFailed:"Failed to remove item",stopped:"Print stopped",stopFailed:"Failed to stop print",released:"Print released to queue",startFailed:"Failed to start print",reorderFailed:"Failed to reorder queue",historyCleared:"Cleared {{count}} history item(s)",clearHistoryFailed:"Failed to clear history",updateFailed:"Failed to update items",bulkCancelled:"Cancelled {{count}} item(s)",bulkCancelFailed:"Failed to cancel items"},timeline:{listView:"List",timelineView:"Timeline",unassigned:"Unassigned",noData:"No scheduled prints for this day",allDoneBy:"All prints estimated done by {{time}}",staged:"Staged",filterAll:"Show All",filterPrinting:"Printing",filterQueued:"Queued",time:{anyMoment:"any moment",minutesLeft:"{{minutes}}m left",hoursLeft:"{{hours}}h left",hoursMinutesLeft:"{{hours}}h {{minutes}}m left"},day:{previous:"Previous day",next:"Next day",today:"Today"}},permissions:{noStopPrint:"You do not have permission to stop prints",noStartPrint:"You do not have permission to start prints",noEdit:"You do not have permission to edit this queue item",noCancel:"You do not have permission to cancel this queue item",noRequeue:"You do not have permission to re-queue items",noRemove:"You do not have permission to remove this queue item",noClearHistory:"You do not have permission to clear all history",noEditItems:"You do not have permission to edit queue items",noCancelItems:"You do not have permission to cancel queue items"}},backgroundDispatch:{unknownFile:"Unknown file",unknownPrinter:"Unknown printer",startingPrints:"Starting prints",progressSummary:"{{complete}}/{{total}} complete • Dispatched: {{dispatched}} • Processing: {{processing}}",expandDetails:"Expand dispatch details",collapseDetails:"Collapse dispatch details",dismissToast:"Dismiss dispatch toast",cancelDispatchJob:"Cancel dispatch job",cancel:"Cancel",cancelling:"Cancelling…",awaitingPrinter:"Awaiting printer…",status:{dispatched:"Dispatched",processing:"Processing",completed:"Completed",failed:"Failed",cancelled:"Cancelled"},toast:{cancellingUpload:"Cancelling upload...",cancelled:"Dispatch cancelled",cancelFailed:"Failed to cancel dispatch",completeWithFailures:"Background dispatch complete: {{completed}} succeeded, {{failed}} failed",completeSuccess:"Background dispatch complete: {{completed}} succeeded",printStartedRemaining:"{{completed}} print(s) started, {{remaining}} more sending..."}},stats:{title:"Statistics",subtitle:"Drag widgets to rearrange. Click the eye icon to hide.",overview:"Overview",totalPrints:"Total Prints",successRate:"Success Rate",totalPrintTime:"Total Print Time",printTime:"Print Time",totalFilament:"Total Filament Used",filamentUsed:"Filament Used",filamentCost:"Filament Cost",totalCost:"Total Cost",energyUsed:"Energy Used",energyCost:"Energy Cost",energyWarmingUpTooltip:"Energy tracking is still collecting hourly snapshots. Date-range totals will become accurate once at least one snapshot exists before the selected range. Early values may undercount.",averagePrintTime:"Average Print Time",printsPerDay:"Prints per Day",byPrinter:"By Printer",printsByPrinter:"Prints by Printer",byMaterial:"By Material",byMonth:"By Month",last7Days:"Last 7 Days",last30Days:"Last 30 Days",last90Days:"Last 90 Days",allTime:"All Time",quickStats:"Quick Stats",printActivity:"Print Activity",filamentTypes:"Filament Types",filamentTrends:"Filament Trends",failureAnalysis:"Failure Analysis",timeAccuracy:"Time Accuracy",successful:"Successful:",failed:"Failed:",cancelled:"Cancelled:",perfectEstimate:"100% = perfect estimate",noTimeAccuracyData:"No time accuracy data yet",noFilamentData:"No filament data available",noPrinterData:"No printer data available",noPrintData:"No print data available",noPrintDataLast30Days:"No print data in the last 30 days",failureReasons:"Failure Reasons",topFailureReasons:"Top Failure Reasons",failedPrintsCount:"{{failed}} / {{total}} prints failed",lastWeekRate:"Last week: {{rate}}%",resetLayout:"Reset Layout",recalculateCosts:"Recalculate Costs",recalculateCostsHint:"Recalculate all archive costs using current filament prices",exportStats:"Export Stats",exportAsCsv:"Export as CSV",exportAsExcel:"Export as Excel",hiddenCount:"{{count}} Hidden",exportDownloaded:"Export downloaded",exportFailed:"Export failed",layoutReset:"Layout reset",recalculatedCosts:"Recalculated costs for {{count}} archives",recalculateFailed:"Failed to recalculate costs",loadingStats:"Loading statistics...",noPermissionResetLayout:"You do not have permission to reset layout",noPermissionRecalculate:"You do not have permission to recalculate costs",noPrintDataInRange:"No print data in selected range",periodFilament:"Period Filament",periodCost:"Period Cost",avgPerPrint:"Avg per Print",usageOverTime:"Usage Over Time",filamentByWeight:"Weight",printDuration:"Print Duration",printerUtilization:"Printer Utilization",filamentSuccess:"Success by Material",printHabits:"Print Habits",printTimeOfDay:"Print Time of Day",colorDistribution:"Color Distribution",noColorData:"No color data available",records:"Records",longestPrint:"Longest Print",heaviestPrint:"Heaviest Print",mostExpensivePrint:"Most Expensive",busiestDay:"Busiest Day",successStreak:"Success Streak",streakPrint:"consecutive print",streakPrints:"{{count}} consecutive prints",printerStats:"Printer Stats",hours:"hours",avgPrints:"Avg. prints",noArchiveData:"No print data available",filamentByTime:"Time",avgWeight:"Avg. weight",avgTime:"Avg. time",filamentByPrints:"Prints",timeframe:{today:"Today","this-week":"This Week","this-month":"This Month","last-7":"Last 7 Days","last-30":"Last 30 Days","last-90":"Last 90 Days","this-year":"This Year","all-time":"All Time",custom:"Custom Range",from:"From",to:"To"},allUsers:"All Users",noUser:"No User (System)",filterByUser:"Filter by User"},maintenance:{title:"Maintenance",overview:"Overview",allOk:"All maintenance up to date",dueCount:"{{count}} item due",dueCount_plural:"{{count}} items due",warningCount:"{{count}} warning",warningCount_plural:"{{count}} warnings",totalPrintTime:"Total Print Time",nextMaintenance:"Next Maintenance",nothingDue:"Nothing due",tasks:"Tasks",lastPerformed:"Last performed",interval:"Interval",hoursRemaining:"{{hours}}h remaining",hoursOverdue:"{{hours}}h overdue",markDone:"Mark as Done",performMaintenance:"Perform Maintenance",history:"History",noHistory:"No maintenance history",editPrintHours:"Edit Print Hours",currentHours:"Current Hours",statusTab:"Status",settingsTab:"Settings",overdueCount:"{{count}} overdue",dueSoonCount:"{{count}} due soon",dueSoon:"Due soon",allGood:"All good",overdueBy:"Overdue by {{duration}}",dueIn:"Due in {{duration}}",timeLeft:"{{duration}} left",day:"1 day",days:"{{count}} days",week:"1 week",weeks:"{{count}} weeks",month:"1 month",months:"{{count}} months",year:"1 year",maintenanceTypes:"Maintenance Types",maintenanceTypesDescription:"System types and your custom maintenance tasks",addCustomType:"Add Custom Type",restoreDefaults:"Restore Default Tasks",intervalType:"Interval Type",intervalValue:"Interval ({{type}})",icon:"Icon",documentationLink:"Documentation Link (optional)",assignToPrinters:"Assign to Printers",selectAtLeastOnePrinter:"Select at least one printer",addType:"Add Type",custom:"Custom",printHours:"Print Hours",calendarDays:"Calendar Days",exampleName:"e.g., Replace HEPA Filter",viewDocumentation:"View documentation",timeBasedInterval:"Time-based interval",intervalOverrides:"Interval Overrides",intervalOverridesDescription:"Customize intervals for specific printers",assignedToPrinters:"Assigned to printers:",noPrintersAssigned:"No printers assigned",addPrinterShort:"Add:",printersAssignedClick:"{{count}} printer(s) assigned - click to manage",removeFromPrinter:"Remove from this printer",types:{lubricateCarbonRods:"Lubricate Carbon Rods",lubricateRails:"Lubricate Linear Rails",cleanNozzle:"Clean Nozzle/Hotend",checkBelts:"Check Belt Tension",cleanBuildPlate:"Clean Build Plate",checkExtruder:"Check Extruder Gears",checkCooling:"Check Cooling Fans",generalInspection:"General Inspection",cleanCarbonRods:"Clean Carbon Rods",lubricateSteelRods:"Lubricate Steel Rods",cleanSteelRods:"Clean Steel Rods",cleanLinearRails:"Clean Linear Rails",checkPtfeTube:"Check PTFE Tube",replaceHepaFilter:"Replace HEPA Filter",replaceCarbonFilter:"Replace Carbon Filter",lubricateLeftNozzleRail:"Lubricate Left Nozzle Rail"},maintenanceComplete:"Maintenance marked as complete",typeUpdated:"Maintenance type updated",typeDeleted:"Maintenance type deleted",defaultsRestored:"Restored {{count}} default task(s)",printHoursUpdated:"Print hours updated",printerAssigned:"Printer assigned",printerRemoved:"Printer removed",deleteTypeConfirm:'Delete "{{name}}"?',deleteSystemTypeTitle:"Delete default maintenance task?",deleteSystemTypeMessage:'Are you sure you want to delete the default maintenance task "{{name}}"?',noPermissionUpdate:"You do not have permission to update maintenance items",noPermissionPerform:"You do not have permission to perform maintenance",noPermissionEditTypes:"You do not have permission to edit maintenance types",noPermissionDeleteTypes:"You do not have permission to delete maintenance types",noPermissionEditHours:"You do not have permission to edit print hours",noPermissionRemovePrinter:"You do not have permission to remove printer assignments",noPermissionAssignPrinter:"You do not have permission to assign printers",noPermissionEditIntervals:"You do not have permission to edit intervals",configureSettings:"Configure maintenance types and intervals"},settings:{title:"Settings",general:"General",tabs:{general:"General",smartPlugs:"Smart Plugs",notifications:"Notifications",queue:"Workflow",filament:"Filament",network:"Network",apiKeys:"API Keys",virtualPrinter:"Virtual Printer",spoolbuddy:"SpoolBuddy",failureDetection:"Failure Detection",users:"Authentication",backup:"Backup",emailAuth:"Email Authentication",ldap:"LDAP",twoFa:"Two-Factor Auth",oidc:"SSO / OIDC",security:"Security"},spoolbuddy:{infoTitle:"SpoolBuddy devices",infoBody:"SpoolBuddy kiosks register themselves automatically via heartbeat. Unregister a device here if it is no longer in use or if a stale duplicate was left behind by a daemon crash.",duplicatesTitle:"{{count}} devices registered",duplicatesBody:"Only the first registered device is used by the kiosk UI. If one of these is a stale duplicate from a crash, unregister it — an online device will re-register itself on its next heartbeat.",empty:"No SpoolBuddy devices registered yet.",online:"Online",offline:"Offline",unregister:"Unregister",unregisterSuccess:"Device unregistered",unregisterError:"Failed to unregister device",confirmTitle:"Unregister SpoolBuddy device?",confirmBody:'This will remove "{{hostname}}" ({{deviceId}}) from the database. If the device is online, it will re-register itself on its next heartbeat.',ipAddress:"IP address",firmware:"Firmware",lastSeen:"Last seen",daemonUptime:"Daemon uptime",systemUptime:"System uptime",never:"never",nfc:"NFC",scale:"Scale",cpuTemp:"CPU temp",cpuLoad:"CPU load",memory:"Memory",disk:"Disk",update:"Update",updateConfirmTitle:"Update Spoolbuddy daemon?",updateConfirmBody:'Trigger a software update on "{{hostname}}"? The daemon will restart once the update is applied.',restartBrowser:"Restart Browser",restartBrowserConfirmTitle:"Restart kiosk browser?",restartBrowserConfirmBody:'Restart the kiosk browser on "{{hostname}}"? The display will blank briefly.',restartDaemon:"Restart Daemon",restartDaemonConfirmTitle:"Restart Spoolbuddy daemon?",restartDaemonConfirmBody:'Restart the Spoolbuddy daemon on "{{hostname}}"? The device will go offline for a few seconds.',reboot:"Reboot",rebootConfirmTitle:"Reboot device?",rebootConfirmBody:'Reboot "{{hostname}}"? The device will be offline for around a minute.',shutdown:"Shutdown",shutdownConfirmTitle:"Shutdown device?",shutdownConfirmBody:'Shutdown "{{hostname}}"? You will need physical access to power it back on.',commandConfirm:"Confirm",commandQueued:"Command queued",commandError:"Failed to send command"},ldap:{title:"LDAP Authentication",enabledDesc:"LDAP authentication is enabled",disabledDesc:"LDAP authentication is disabled",disabledHint:"Configure and save LDAP settings below, then enable.",enabled:"LDAP authentication enabled",disabled:"LDAP authentication disabled",feature1:"Users can login with LDAP credentials",feature2:"Local admin account remains as fallback",feature3:"LDAP groups are mapped to BamBuddy groups on login",serverConfig:"LDAP Server Configuration",serverUrl:"Server URL",serverUrlHint:"Use ldaps:// for SSL or ldap:// with StartTLS",security:"Security",securityHint:"StartTLS upgrades a plain connection to TLS. LDAPS uses TLS from the start.",bindDn:"Bind DN (Service Account)",bindPassword:"Bind Password",searchBase:"Search Base DN",userFilter:"User Search Filter",userFilterHint:"{username} is replaced with the login username. Use (uid={username}) for OpenLDAP.",advanced:"Advanced",autoProvision:"Auto-provision users",autoProvisionHint:"Automatically create a BamBuddy account on first LDAP login",defaultGroup:"Default group",defaultGroupNone:"— None (no fallback) —",defaultGroupHint:"Fallback group assigned when an LDAP user authenticates but is not listed in any mapped LDAP group. Leave empty to leave unmapped users without permissions.",groupMapping:"Group Mapping (JSON)",groupMappingHint:"Map LDAP group DNs to BamBuddy groups. Available groups: ",testConnection:"Test Connection",settingsSaved:"LDAP settings saved",errors:{serverRequired:"LDAP server URL is required",searchBaseRequired:"Search base DN is required",enableAuthFirst:"Enable authentication first",configureLdapFirst:"Save LDAP settings first"}},email:{smtpSettings:"SMTP Configuration",smtpHost:"SMTP Server",smtpPort:"SMTP Port",security:"Security",authentication:"Authentication",username:"Username",password:"Password",fromEmail:"From Email",fromName:"From Name",testConnection:"Test SMTP Connection",testRecipient:"Test Recipient Email",sendTest:"Send Test Email",sending:"Sending...",save:"Save Settings",saving:"Saving...",advancedAuth:"Advanced Authentication",advancedAuthEnabled:"Advanced Authentication is enabled",advancedAuthEnabledDesc:"Email-based user management features are active. New users will receive auto-generated passwords via email, and users can reset their passwords through the forgot password feature.",advancedAuthDisabled:"Advanced Authentication is disabled",advancedAuthDisabledDesc:"Enable advanced authentication to activate email-based features for user management.",enable:"Enable",disable:"Disable",feature1:"Passwords are auto-generated and emailed to new users",feature2:"Users can login with username or email",feature3:"Forgot password feature is available",feature4:"Admins can reset user passwords via email",errors:{requiredFields:"Please fill in all required fields",usernameRequired:"Username is required when authentication is enabled",enterTestEmail:"Please enter a test email address",smtpServerAndEmail:"Please fill in SMTP Server and From Email before testing",usernamePasswordRequired:"Username and Password are required when authentication is enabled",configureSmtpFirst:"Please configure and test SMTP settings first",enableAuthFirst:"Please enable authentication first to use email-based features."},success:{settingsSaved:"SMTP settings saved successfully"},securityOptions:{starttls:"STARTTLS (Port 587)",ssl:"SSL/TLS (Port 465)",none:"None (Port 25)"},authOptions:{enabled:"Enabled",disabled:"Disabled"}},appearance:"Appearance",notifications:"Notifications",smartPlugs:"Smart Plugs",spoolman:"Spoolman",updates:"Updates",language:"Language",languageDescription:"Select your preferred language",theme:"Theme",themeLight:"Light",themeDark:"Dark",themeSystem:"System",defaultView:"Default View",defaultViewDescription:"Page to show when opening the app",checkForUpdates:"Check for Updates",autoUpdate:"Auto Update",currentVersion:"Current Version",latestVersion:"Latest Version",upToDate:"You are up to date",updateAvailable:"Update available",notificationLanguage:"Notification Language",notificationLanguageDescription:"Language for push notifications",bedCooledThreshold:"Bed Cooled Threshold",bedCooledThresholdDescription:"Temperature below which the bed is considered cooled after a print",userNotificationsEnabled:"User Notifications",userNotificationsEnabledDescription:"Enable the user notifications menu and email notifications for print job events. Requires Advanced Authentication.",userNotificationsDisabledHint:"Enable Advanced Authentication to use user notifications.",notificationProviders:"Notification Providers",addProvider:"Add Provider",editProvider:"Edit Provider",providerType:"Provider Type",testNotification:"Test Notification",testSuccess:"Test notification sent successfully",testFailed:"Failed to send test notification",quietHours:"Quiet Hours",quietHoursDescription:"Do not disturb during these hours",quietHoursStart:"Start",quietHoursEnd:"End",events:{title:"Notification Events",printStart:"Print Started",printComplete:"Print Completed",printFailed:"Print Failed",printStopped:"Print Stopped",printProgress:"Progress Milestones",printProgressDescription:"Notify at 25%, 50%, 75%",printerOffline:"Printer Offline",printerError:"Printer Error",filamentLow:"Low Filament",maintenanceDue:"Maintenance Due",maintenanceDueDescription:"Notify when maintenance is needed"},smartPlug:{title:"Smart Plugs",add:"Add Smart Plug",edit:"Edit Smart Plug",name:"Name",ipAddress:"IP Address",linkedPrinter:"Linked Printer",autoOn:"Auto Power On",autoOnDescription:"Turn on when print starts",autoOff:"Auto Power Off",autoOffDescription:"Turn off after print completes",offDelay:"Off Delay",offDelayMinutes:"Minutes after print",offDelayTemp:"When nozzle below temperature",currentState:"Current State",turnOn:"Turn On",turnOff:"Turn Off"},filamentTracking:"Filament Tracking",filamentTrackingDesc:"Choose how to track your filament spools. You can use the built-in inventory or connect an external Spoolman server.",filamentChecks:"Filament checks",disableFilamentWarnings:"Disable filament warnings",disableFilamentWarningsDesc:"Don't show warnings about insufficient filament when printing or queueing",preferLowestFilament:"Prefer lowest remaining filament",preferLowestFilamentDesc:"When multiple spools match, use the one with the least filament remaining",trackingModeBuiltIn:"Built-in Inventory",trackingModeBuiltInDesc:"RFID auto-matching and usage tracking included",trackingModeSpoolmanDesc:"External filament management server",builtInFeatureRfid:"Automatically detects Bambu Lab RFID spools in AMS",builtInFeatureUsage:"Tracks filament consumption per print",builtInFeatureCatalog:"Manage spools, colors, and K-factor profiles",builtInFeatureThirdParty:"Third-party spools can be assigned to inventory spools",amsSyncButton:"Sync Weights from AMS",amsSyncTitle:"Sync Spool Weights from AMS",amsSyncMessage:"This will overwrite all inventory spool weights with the current AMS remain% values from connected printers. Use this to recover from corrupted weight data. Printers must be online.",amsSyncing:"Syncing...",amsSyncSuccess:"{{synced}} spool(s) synced, {{skipped}} skipped",amsSyncError:"Failed to sync weights from AMS",spoolmanAmsSyncButton:"Sync Spoolman Weights from AMS",spoolmanAmsSyncTitle:"Sync Spoolman Spool Weights from AMS",spoolmanAmsSyncMessage:"This will update all Spoolman spool weights based on the current AMS remain% values from connected printers. Printers must be online.",spoolmanAmsSyncing:"Syncing...",spoolmanAmsSyncSuccess:"{{synced}} spool(s) synced, {{skipped}} skipped",spoolmanAmsSyncError:"Failed to sync Spoolman weights from AMS",spoolmanAmsSyncErrorUnreachable:"Failed to sync Spoolman weights (Spoolman unreachable)",spoolmanAmsSyncErrorNotConfigured:"Failed to sync Spoolman weights (Spoolman not configured)",spoolmanNotConfigured:"Spoolman not configured",spoolmanFilamentCatalogTitle:"Spoolman Filament Catalog",spoolmanFilamentCatalogDesc:"Filament names and tare weights from your Spoolman instance. Name and spool weight are editable here; all other properties are managed directly in Spoolman.",spoolmanUrl:"Spoolman URL",spoolmanUrlHint:"URL of your Spoolman server (e.g., http://localhost:7912)",spoolmanConnected:"Connected",spoolmanDisconnected:"Disconnected",status:"Status",connect:"Connect",disconnect:"Disconnect",howSyncWorks:"How Sync Works",syncInfoRfidOnly:"Only official Bambu Lab spools with RFID are synced",syncInfoAutoCreate:"New spools are auto-created in Spoolman on first sync",syncInfoThirdPartySkipped:"Non-Bambu Lab spools (third-party, refilled) are skipped",linkingExistingSpools:"Linking Existing Spools",linkingExistingSpoolsDesc:'To link existing Spoolman spools to your AMS, hover over an AMS slot and click "Link to Spoolman".',syncMode:"Sync Mode",syncModeAuto:"Automatic",syncModeManual:"Manual Only",syncModeAutoDesc:"AMS data syncs automatically when changes are detected",syncModeManualDesc:"Only sync when manually triggered",syncAmsData:"Sync AMS Data",syncAmsDataDesc:"Manually sync printer AMS data to Spoolman",allPrinters:"All Printers",noDefaultPrinter:"No default (ask each time)",sidebarOrder:"Sidebar order",saveThumbnails:"Save thumbnails",captureFinishPhoto:"Capture finish photo",noPrintersConfigured:"No printers configured",archiveMode:{always:"Always create archive entry",never:"Never create archive entry",ask:"Ask each time"},checkForUpdatesLabel:"Check for updates",checkPrinterFirmware:"Check printer firmware",includeBetaUpdates:"Include beta versions",includeBetaUpdatesDesc:"Notify about beta and prerelease versions when checking for updates",enableRetry:"Enable retry",homeAssistantDescription:"Control smart plugs via Home Assistant",environmentManagedLabel:"(Environment Managed)",autoEnabledViaEnv:"Automatically enabled via environment variables",urlFromEnvReadOnly:"Value set by HA_URL environment variable (read-only)",tokenFromEnvReadOnly:"Value set by HA_TOKEN environment variable (read-only)",mqttConnectedTo:"Connected to",prometheusDescription:"Expose printer data in Prometheus format",noSmartPlugsTitle:"No smart plugs configured",noSmartPlugsDescription:"Add a Tasmota-based smart plug to track energy usage and automate power control.",noProvidersTitle:"No providers configured",noProvidersDescription:"Add a provider to receive alerts.",noTemplatesAvailable:"No templates available. Restart the backend to seed default templates.",apiPermissionView:"View printer status and queue",apiPermissionEdit:"Add and remove items from print queue",apiKeysEmptyTitle:"No API keys",apiKeysEmptyDescription:"Create an API key to integrate with external services.",noUsersFound:"No users found",noGroupsFound:"No groups found",noGroupsAvailable:"No groups available",passwordsDoNotMatch:"Passwords do not match",systemGroupWarning:"System group names cannot be changed",authDisabledTitle:"Authentication is Disabled",authDisabledFeature1:"Require login to access the system",authDisabledFeature2:"Create multiple users with group-based permissions",authDisabledFeature3:"Control access with 50+ granular permissions",userHasCreated:"This user has created:",userItemsQuestion:"What would you like to do with these items?",deleteUserConfirm:"Are you sure you want to delete this user?",actionCannotBeUndone:"This action cannot be undone.",addFirstSmartPlug:"Add Your First Smart Plug",providers:"Providers",log:"Log",testAll:"Test All",testResults:"Test Results",testPassedCount:"{{count}} passed",testFailedCount:"{{count}} failed",messageTemplates:"Message Templates",messageTemplatesDescription:"Customize notification messages for each event.",apiKeys:"API Keys",apiKeysDescription:"Create API keys for external integrations and webhooks.",createKey:"Create Key",apiKeyCreated:"API Key Created Successfully",apiKeyCopyWarning:"Copy this key now - it won't be shown again!",useInApiBrowser:"Use in API Browser",createNewApiKey:"Create New API Key",keyName:"Key Name",keyNamePlaceholder:"e.g., Home Assistant, OctoPrint",readStatus:"Read Status",readStatusDescription:"View printer status and queue",manageQueue:"Manage Queue",manageQueueDescription:"Add and remove items from print queue",controlPrinter:"Control Printer",controlPrinterDescription:"Pause, resume, and stop prints",manageLibrary:"Manage Library",manageLibraryDescription:"Upload, rename, and delete library files; import models from MakerWorld",manageInventory:"Manage Inventory",manageInventoryDescription:"Create, update, and delete spools and inventory records. Required for SpoolBuddy kiosks (NFC scan, scale readings, kiosk system commands).",libraryBadge:"Library",inventoryBadge:"Inventory",cloudAccess:"Allow cloud access",cloudAccessDescription:"Read Bambu Cloud presets and filaments on your behalf. Requires you to be signed into Bambu Cloud.",cloudBadge:"Cloud",updateEnergyCost:"Update electricity price",updateEnergyCostDescription:"Allow this key to POST a new per-kWh electricity price to /settings/electricity-price. Useful for Home Assistant dynamic-tariff automations (Tibber, Octopus, etc.). This is the only settings field writable via API key.",energyCostBadge:"Energy",legacyKey:"Legacy",legacyKeyTooltip:"Created before per-user ownership; recreate to use cloud access",unnamedKey:"Unnamed Key",lastUsed:"Last used",read:"Read",control:"Control",createFirstKey:"Create Your First Key",webhookEndpoints:"Webhook Endpoints",webhookApiKeyHint:"Use your API key in the X-API-Key header.",webhook:{getAllStatus:"Get all printer status",getSpecificStatus:"Get specific printer status",addToQueue:"Add to print queue",pausePrint:"Pause print",resumePrint:"Resume print",stopPrint:"Stop print"},apiBrowser:"API Browser",apiBrowserDescription:"Explore and test all available API endpoints.",apiKeyForTesting:"API Key for Testing",apiKeyPlaceholder:"Paste your API key here to test authenticated endpoints...",apiKeyHint:"This key will be sent as X-API-Key header with requests.",deleteApiKeyTitle:"Delete API Key",deleteApiKeyMessage:"Are you sure you want to delete this API key? Any integrations using this key will stop working.",deleteKey:"Delete Key",amsDisplayThresholds:"AMS Display Thresholds",amsThresholdsDescription:"Configure color thresholds for AMS humidity and temperature indicators.",humidity:"Humidity",goodGreen:"Good (green)",fairOrange:"Fair (orange)",aboveFairBad:"Above fair threshold shows as red (bad)",fairAlsoDryingThreshold:"This threshold is also used to trigger auto-drying when enabled",temperature:"Temperature",goodBlue:"Good (blue)",aboveFairHot:"Above fair threshold shows as red (hot)",historyRetention:"History Retention",keepSensorHistory:"Keep sensor history for",historyRetentionDescription:"Older humidity and temperature data will be automatically deleted",defaultPrintOptions:"Default Print Options",defaultPrintOptionsDescription:"Set default values for print options when starting new prints. These can be overridden per print in the print dialog.",defaultBedLevelling:"Bed Levelling",defaultBedLevellingDesc:"Auto-level bed before print",defaultFlowCali:"Flow Calibration",defaultFlowCaliDesc:"Calibrate extrusion flow",defaultVibrationCali:"Vibration Calibration",defaultVibrationCaliDesc:"Reduce ringing artifacts",defaultLayerInspect:"First Layer Inspection",defaultLayerInspectDesc:"AI inspection of first layer",defaultTimelapse:"Timelapse",defaultTimelapseDesc:"Record timelapse video",staggeredStart:"Staggered Start",staggeredStartDescription:"Default group size and interval when staggering multi-printer batch starts. Can be overridden per batch in the print modal.",plateClear:"Plate-Clear Confirmation",requirePlateClear:"Require plate-clear confirmation",requirePlateClearDescription:'When enabled, the scheduler waits for per-printer plate-clear confirmation before starting queued prints on printers with finished jobs. Disabling this also hides the plate status badge and the "Mark plate as cleared" button on printer cards.',gcodeInjection:"G-code Injection",gcodeInjectionDescription:'Configure custom G-code to inject at the start and/or end of prints for auto-print systems like Farmloop, SwapMod, AutoClear, and Printflow 3D. Snippets are configured per printer model and applied when "Inject G-code" is enabled on a queue item.',gcodeInjectionNoPrinters:"No printers found. Add printers to configure G-code snippets.",gcodeStartLabel:"Start G-code",gcodeEndLabel:"End G-code",gcodeStartPlaceholder:"G-code prepended before the print starts...",gcodeEndPlaceholder:"G-code appended after the print ends...",staggerGroupSize:"Group size",staggerGroupSizeHelp:"Printers to start simultaneously per group",staggerInterval:"Interval (minutes)",staggerIntervalHelp:"Delay between each group starting",queueDrying:"Queue Auto-Drying",queueDryingDescription:"Automatically dry AMS filament when printer is idle between queued prints. Uses humidity threshold above to trigger drying.",queueDryingEnabled:"Enable auto-drying",queueDryingEnabledDescription:"Start AMS drying automatically when printer is idle and humidity is above threshold",queueDryingBlock:"Wait for drying to complete",queueDryingBlockDescription:"Block the print queue until drying finishes. When off, prints take priority over drying.",ambientDryingEnabled:"Ambient drying",ambientDryingEnabledDescription:"Automatically dry filament on idle printers when humidity exceeds threshold, even without queued prints.",dryingPresets:"Drying Presets",dryingPresetsDescription:"Temperature and duration per filament type. AMS 2 Pro uses lower temps, AMS-HT supports higher temps.",dryingFilament:"Filament",printModal:"Print Modal",expandCustomMapping:"Expand custom mapping by default",expandCustomMappingDescription:"When printing to multiple printers, show per-printer AMS mapping expanded",authentication:"Authentication",authEnabledDescription:"Your instance is secured with user authentication",authDisabledDescription:"Enable to require login and manage user access",authDisabledMessage:"Enable authentication to create user accounts, manage permissions, and secure your Bambuddy instance.",enableAuthentication:"Enable Authentication",currentUser:"Current User",changePassword:"Change Password",admin:"Admin",users:"Users",addUser:"Add User",groups:"Groups",addGroup:"Add Group",system:"System",noDescription:"No description",userCount:"{{count}} users",permissionCount:"{{count}} permissions",createUser:"Create User",username:"Username",enterUsername:"Enter username",password:"Password",enterPassword:"Enter password",passwordRequirements:"At least 8 characters, with one uppercase, one lowercase, one digit, and one special character.",confirmPassword:"Confirm Password",confirmPasswordPlaceholder:"Confirm password",viewReleaseOnGitHub:"View release on GitHub",turnAllPlugsOn:"Turn all plugs on",turnAllPlugsOff:"Turn all plugs off",clearNotificationLogs:"Clear Notification Logs",clearLogsMessage:"This will permanently delete all notification logs older than 30 days. This action cannot be undone.",clearLogs:"Clear Logs",resetUiPreferences:"Reset UI Preferences",resetUiPreferencesMessage:"This will reset all UI preferences to defaults: sidebar order, theme, dashboard layout, view modes, and sorting preferences. Your printers, archives, and server settings will NOT be affected. The page will reload after clearing.",resetPreferences:"Reset Preferences",deleteGroupTitle:"Delete Group",deleteGroupMessage:"Are you sure you want to delete this group? Users in this group will lose these permissions.",deleteGroup:"Delete Group",disableAuthenticationTitle:"Disable Authentication",disableAuthenticationMessage:"Are you sure you want to disable authentication? This will make your Bambuddy instance accessible without login. All users will remain in the database but authentication will be disabled.",disableAuthentication:"Disable Authentication",configureBambuddy:"Configure Bambuddy",systemDefault:"System Default",archiveSettings:"Archive Settings",newWindow:"New Window",embeddedOverlay:"Embedded Overlay",preferredSlicer:"Preferred Slicer",preferredSlicerDescription:"Choose which slicer application to open files with",orcaslicerKnownIssuesWarning:"OrcaSlicer 2.3.2 / 2.4.0-dev have known CLI bugs that block slicing many Bambu-authored 3MFs — see upstream issues #12426 (segfault on painted multi-extruder files) and #13386 (parameter-range strict-validation reject). Bambu Studio is recommended until the upstream fixes land.",useSlicerApi:"Use Slicer API",useSlicerApiDescription:'When on, "Slice" actions open the in-app slicer modal and call the slicer-API sidecar. When off (default), they hand off to the desktop slicer via URI scheme.',slicerCard:"Slicer",orcaslicerApiUrl:"OrcaSlicer sidecar URL",bambuStudioApiUrl:"Bambu Studio sidecar URL",slicerApiUrlDescription:"URL of the slicer-API sidecar container. Leave blank to use the SLICER_API_URL / BAMBU_STUDIO_API_URL env var defaults.",slicerBundles:{title:"Slicer Bundles",description:'Import a Printer Preset Bundle (.bbscfg) exported from BambuStudio (File → Export → Export Preset Bundle → "Printer preset bundle"). Once imported, slice requests can pick presets from the bundle by name without re-uploading the JSON profile triplet.',uploadButton:"Upload bundle",uploading:"Uploading…",loading:"Loading bundles…",empty:"No bundles imported yet.",summary:"{{processCount}} process · {{filamentCount}} filament presets",delete:"Delete",uploadSuccess:"Imported {{name}}",uploadError:"Bundle upload failed: {{message}}",deleteSuccess:"Bundle removed",deleteError:"Bundle delete failed: {{message}}",confirmDeleteTitle:"Remove this bundle?",confirmDeleteMessage:'Slice requests that reference "{{name}}" will fail until the bundle is re-imported.'},externalCameras:"External Cameras",costTracking:"Cost Tracking",printsOnly:"Prints Only",totalConsumption:"Total Consumption",dataManagement:"Data Management",storageUsage:"Storage Usage",storageUsageDescription:"Breakdown of data usage by category",storageUsageTotal:"Total",storageUsageErrors:"Errors",storageUsageOtherBreakdown:"Other (includes static assets, scripts, and configuration files)",storageUsageSystem:"System",storageUsageData:"Data",storageUsageUnavailable:"Storage usage information unavailable",clearNotificationLogsDescription:"Delete notification logs older than 30 days",resetUiPreferencesDescription:"Reset sidebar order, theme, view modes, and layout preferences. Printers, archives, and settings are not affected.",enableHomeAssistant:"Enable Home Assistant",enableMqtt:"Enable MQTT",useTls:"Use TLS",enableMetricsEndpoint:"Enable Metrics Endpoint",availableMetrics:"Available Metrics",editUser:"Edit User",deleteUserTitle:"Delete User",groupName:"Group Name",leaveEmptyForAnonymous:"Leave empty for anonymous",leaveEmptyForNoAuth:"Leave empty for no authentication",enterNewPassword:"Enter new password",confirmNewPassword:"Confirm new password",enterGroupName:"Enter group name",enterDescriptionOptional:"Enter description (optional)",enterCurrentPassword:"Enter current password",enterNewPasswordMin6:"Enter new password (min 6 characters)",toast:{keyCopied:"Key copied to clipboard",copyFailed:"Failed to copy key",keyAddedToBrowser:"Key added to API Browser",clearLogsFailed:"Failed to clear logs",uiPreferencesReset:"UI preferences reset. Refreshing...",authDisabled:"Authentication disabled successfully",authDisableFailed:"Failed to disable authentication",apiKeyCreated:"API key created",apiKeyDeleted:"API key deleted",userCreated:"User created successfully",userUpdated:"User updated successfully",userDeleted:"User deleted successfully",groupCreated:"Group created successfully",groupUpdated:"Group updated successfully",groupDeleted:"Group deleted successfully",fillRequiredFields:"Please fill in all required fields",passwordsDoNotMatch:"Passwords do not match",passwordTooShort:"Password must be at least 8 characters",passwordNeedsUppercase:"Password must contain at least one uppercase letter",passwordNeedsLowercase:"Password must contain at least one lowercase letter",passwordNeedsDigit:"Password must contain at least one digit",passwordNeedsSpecial:"Password must contain at least one special character",enterGroupName:"Please enter a group name",settingsSaved:"Settings saved",noPermissionUpdate:"You do not have permission to change settings",cameraSettingsSaved:"Camera settings saved",enterCameraUrl:"Please enter a camera URL",passwordChanged:"Password changed successfully",connectionFailed:"Connection failed",testFailed:"Test failed",cameraConnected:"Camera connected{{resolution}}"},testConnection:"Test Connection",catalog:{spoolCatalog:"Spool Catalog",spoolCatalogDescription:"Empty spool weights by brand/type. Used for automatic weight lookup when adding spools.",searchCatalog:"Search catalog...",addNewEntry:"Add New Entry",namePlaceholder:"Name (e.g., Bambu Lab - Plastic)",weight:"Weight",type:"Type",default:"Default",custom:"Custom",noMatch:"No entries match your search",empty:"No entries in catalog",deleteEntry:"Delete Entry",deleteConfirm:'Are you sure you want to delete "{{name}}"?',resetCatalog:"Reset Catalog",resetConfirm:"Reset catalog to defaults? This will remove all custom entries.",loadFailed:"Failed to load spool catalog",nameWeightRequired:"Name and weight are required",entryAdded:"Entry added",addFailed:"Failed to add entry",entryUpdated:"Entry updated",updateFailed:"Failed to update entry",entryDeleted:"Entry deleted",deleteFailed:"Failed to delete entry",resetSuccess:"Catalog reset to defaults",resetFailed:"Failed to reset catalog",exported:"Exported {{count}} entries",imported:"Imported {{added}} entries ({{skipped}} skipped)",importFailed:"Failed to import: invalid JSON format",exportTooltip:"Export catalog to JSON",importTooltip:"Import catalog from JSON",resetTooltip:"Reset to defaults",selectedCount:"{{count}} selected",deleteSelected:"Delete Selected",bulkDeleteConfirm:"Are you sure you want to delete {{count}} entries?",bulkDeleted:"Deleted {{count}} entries",bulkDeleteFailed:"Failed to delete entries",material:"Material",spoolWeight:"Spool Weight",color:"Color",updateSpoolWeight:"Update Spool Weight",filamentUpdated:"Filament updated",filamentUpdateFailed:"Failed to update filament",filamentUpdateInvalid:"Invalid filament data",keepExistingSpoolWeight:"Keep old weight for existing spools",keepExistingSpoolWeightDesc:"Spools already created with this filament type retain the old tare weight. New spools use the updated value.",applyToAllSpools:"Apply to all spools",applyToAllSpoolsDesc:"All weight calculations for this filament type immediately use the new tare weight."},colorCatalog:{title:"Color Catalog",description:"Filament colors by manufacturer/material. Used for automatic color lookup when adding spools.",searchColors:"Search colors...",allManufacturers:"All manufacturers",addNewColor:"Add New Color",manufacturer:"Manufacturer",colorName:"Color Name",hex:"Hex",materialOptional:"Material (optional)",showing:"Showing {{filtered}} of {{total}} colors",noMatch:"No colors match your search",empty:"No colors in catalog",deleteColor:"Delete Color",deleteConfirm:'Are you sure you want to delete "{{name}}"?',resetCatalog:"Reset Color Catalog",resetConfirm:"Reset catalog to defaults? This will remove all custom colors.",sync:"Sync",starting:"Starting...",syncTooltip:"Sync from FilamentColors.xyz (2000+ colors, may take a minute)",loadFailed:"Failed to load color catalog",fieldsRequired:"Manufacturer, color name, and hex color are required",colorAdded:"Color added",addFailed:"Failed to add color",colorUpdated:"Color updated",updateFailed:"Failed to update color",colorDeleted:"Color deleted",deleteFailed:"Failed to delete color",resetSuccess:"Color catalog reset to defaults",resetFailed:"Failed to reset catalog",syncUpToDate:"Already up to date ({{count}} colors checked)",syncComplete:"Added {{added}} new colors ({{skipped}} already existed)",syncError:"Sync error",syncFailed:"Failed to sync from FilamentColors.xyz",exported:"Exported {{count}} colors",imported:"Imported {{added}} colors ({{skipped}} skipped)",importFailed:"Failed to import: invalid JSON format",selectedCount:"{{count}} selected",deleteSelected:"Delete Selected",bulkDeleteConfirm:"Are you sure you want to delete {{count}} colors?",bulkDeleted:"Deleted {{count}} colors",bulkDeleteFailed:"Failed to delete colors"},dateFormat:"Date Format",dateFormatUs:"US (MM/DD/YYYY)",dateFormatEu:"EU (DD/MM/YYYY)",dateFormatIso:"ISO (YYYY-MM-DD)",timeFormat:"Time Format",timeFormat12:"12-hour (3:30 PM)",timeFormat24:"24-hour (15:30)",defaultPrinter:"Default Printer",defaultPrinterDescription:"Pre-select this printer for uploads, reprints, and other operations.",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"Drag items in the sidebar to reorder. Reset to default order here.",setDefault:"Set Default",sidebarOrderSetDefaultHint:"Set default applies the current menu order to users who haven't customized theirs.",sidebarDefaultSet:"Default menu order has been set.",sidebarDefaultCleared:"Default menu order cleared.",sidebarDefaultFailed:"Failed to set default menu order.",reset:"Reset",darkMode:"Dark Mode",lightMode:"Light Mode",active:"(active)",background:"Background",accent:"Accent",style:"Style",bgNeutral:"Neutral",bgWarm:"Warm",bgCool:"Cool",bgOled:"OLED Black",bgSlate:"Slate Blue",bgForest:"Forest Green",accentGreen:"Green",accentTeal:"Teal",accentBlue:"Blue",accentOrange:"Orange",accentPurple:"Purple",accentRed:"Red",styleClassic:"Classic",styleGlow:"Glow",styleVibrant:"Vibrant",themeToggleHint:"Toggle between dark, light, and system mode using the icon in the sidebar.",autoArchivePrints:"Auto-archive prints",autoArchiveDescription:"Automatically save 3MF files when prints complete",saveThumbnailsDescription:"Extract and save preview images from 3MF files",captureFinishPhotoDescription:"Take a photo from printer camera when print completes",ffmpegNotInstalled:"ffmpeg not installed",ffmpegRequired:"Camera capture requires ffmpeg. Install it via <brew>brew install ffmpeg</brew> (macOS) or <apt>apt install ffmpeg</apt> (Linux).",camera:"Camera",cameraViewMode:"Camera View Mode",cameraOverlayDescription:"Camera opens in a resizable overlay on the main screen",cameraWindowDescription:"Camera opens in a separate browser window",externalCamerasDescription:"Configure external cameras to replace the built-in printer camera. Supports MJPEG streams, RTSP, HTTP snapshots, and USB cameras (V4L2). When enabled, the external camera is used for live view and finish photos.",cameraPlaceholderUsb:"Device path (/dev/video0)",cameraPlaceholderUrl:"Camera URL (rtsp://... or http://...)",cameraTypeMjpeg:"MJPEG Stream",cameraTypeRtsp:"RTSP Stream",cameraTypeSnapshot:"HTTP Snapshot",cameraTypeUsb:"USB Camera (V4L2)",cameraSnapshotUrl:"Snapshot URL (optional)",cameraSnapshotUrlPlaceholder:"http://192.168.1.61:1984/api/frame.jpeg?src=printer",cameraSnapshotUrlHelp:"Single-frame URL used for notification thumbnails, finish photos, layer-timelapse frames, and plate detection. Timelapse and plate detection each require their own per-printer toggle — this URL is just the image source they pull from when active. Leave blank to capture from the live stream above. Useful for go2rtc (/api/frame.jpeg) and IP cameras with a dedicated snapshot endpoint.",cameraRotation:"Rotation",test:"Test",connected:"Connected",disconnected:"Disconnected",currency:"Currency",defaultFilamentCost:"Default filament cost (per kg)",electricityCost:"Electricity cost per kWh",energyDisplayMode:"Energy display mode",energyModePrintDescription:"Dashboard shows sum of energy used during prints",energyModeTotalDescription:"Dashboard shows lifetime energy from smart plugs",fileManager:"File Manager",createArchiveEntry:"Create Archive Entry When Printing",createArchiveEntryDescription:"When printing from File Manager, optionally create an archive entry",lowDiskSpaceWarning:"Low Disk Space Warning",lowDiskSpaceDescription:"Show warning when free disk space falls below this threshold",printerFirmware:"Printer Firmware",checkFirmwareDescription:"Check for printer firmware updates from Bambu Lab",bambuddySoftware:"Bambuddy Software",autoCheckDescription:"Automatically check for new versions on startup",checkNow:"Check now",updateAvailableVersion:"Update available: v{{version}}",releaseNotes:"Release Notes",updateViaDocker:"Update via Docker Compose:",updateViaHomeAssistant:"Updates are managed by the Home Assistant Supervisor. Open Settings → Add-ons → Bambuddy in Home Assistant to install the new version.",installUpdate:"Install Update",latestVersionRunning:"You're running the latest version",failedToCheckUpdates:"Failed to check for updates: {{error}}",backupRestore:"Backup & Restore",backupRestoreDescription:"Export/import settings and configure GitHub backup",goToBackup:"Go to Backup",externalUrl:"External URL",externalUrlDescription:"The external URL where Bambuddy is accessible. Used for notification images and external integrations.",bambuddyUrl:"Bambuddy URL",externalUrlHint:"Include protocol and port (e.g., http://192.168.1.100:8000)",ftpRetry:"FTP Retry",ftpRetryDescription:"Retry FTP operations when printer WiFi is unreliable. Applies to 3MF downloads, print uploads, timelapse downloads, and firmware updates.",autoRetryDescription:"Automatically retry failed FTP operations",retryAttempts:"Retry attempts",retryDelay:"Retry delay",connectionTimeout:"Connection timeout",time_one:"{{count}} time",time_other:"{{count}} times",second_one:"{{count}} second",second_other:"{{count}} seconds",nSeconds:"{{count}} seconds",increaseForWeakWifi:"Increase for printers with weak WiFi",homeAssistant:"Home Assistant",homeAssistantFullDescription:"Connect to Home Assistant to control smart plugs via HA's REST API. Supports switch, light, input_boolean, and script entities.",homeAssistantUrl:"Home Assistant URL",longLivedAccessToken:"Long-Lived Access Token",haTokenHint:"Create a token in HA: Profile → Long-Lived Access Tokens → Create Token",connectionSuccessful:"Connection Successful",connectionFailed:"Connection Failed",haConnectionSuccess:"Successfully connected to Home Assistant.",haConnectionFailed:"Failed to connect to Home Assistant.",mqttPublishing:"MQTT Publishing",mqttDescription:"Publish BamBuddy events to an external MQTT broker for integration with Node-RED, Home Assistant, and other automation systems.",mqttEnableDescription:"Publish events to external MQTT broker",brokerHostname:"Broker hostname",port:"Port",usernameOptional:"Username (optional)",passwordOptional:"Password (optional)",topicPrefix:"Topic prefix",topicPrefixHint:"Topics will be: {{prefix}}/printers/<serial>/status, etc.",prometheusMetrics:"Prometheus Metrics",prometheusEndpointDescription:"Expose printer metrics at <code>/api/v1/metrics</code> for Prometheus/Grafana monitoring.",bearerTokenOptional:"Bearer Token (optional)",bearerTokenHint:"If set, requests must include <code>Authorization: Bearer <token></code>",metricsConnectionStatus:"Connection status",metricsPrinterState:"Printer state (idle/printing/etc)",metricsPrintProgress:"Print progress 0-100%",metricsBedTemp:"Bed temperature",metricsNozzleTemp:"Nozzle temperature",metricsPrintsTotal:"Total prints by result",metricsMore:"...and more (layers, fans, queue, filament usage)",smartPlugsDescription:"Connect smart plugs (Tasmota or Home Assistant) to automate power control and track energy usage for your printers.",allOn:"All On",allOff:"All Off",addSmartPlug:"Add Smart Plug",energySummary:"Energy Summary",currentPower:"Current Power",plugsOnline:"{{reachable}}/{{total}} plugs online",today:"Today",yesterday:"Yesterday",total:"Total",enablePlugsForSummary:"Enable plugs to see energy summary",addNotificationProvider:"Add",systemBadge:"(System)",creating:"Creating...",changing:"Changing...",deleteUserAndItems:"Delete user AND their items",deleteUserKeepItems:"Delete user, keep items (become ownerless)",ok:"OK",twoFa:{totpTitle:"Authenticator App (TOTP)",totpDesc:"Use an authenticator app like Google Authenticator, Aegis or Authy.",emailOtpTitle:"Email OTP",emailOtpDesc:"Send a one-time code to {{email}} when you log in.",emailOtpNoEmail:"Add an email address to your account to enable this method.",addEmailFirst:"Your account has no email address. Ask an admin to add one before enabling Email OTP.",setupTotp:"Set up Authenticator App",setupAuthApp:"Set up Authenticator App",setupInstructions:"Scan the QR code below with your authenticator app, then confirm with a code.",manualEntry:"Can't scan? Enter this secret manually:",scannedContinue:"I've scanned the code — continue",enterCodeToConfirm:"Enter the 6-digit code from your authenticator app to confirm setup.",activate:"Activate",disableTotp:"Disable Authenticator",disableConfirmHint:"Enter a valid TOTP code or a backup code to disable the authenticator.",totpDisabled:"Authenticator app disabled.",emailOtpEnabled:"Email OTP enabled.",emailOtpDisabled:"Email OTP disabled.",smtpRequired:"Please configure and test SMTP settings first.",invalidCode:"Invalid code. Please try again.",enableEmailOtp:"Enable Email OTP",disableEmailOtp:"Disable Email OTP",emailSetupEnterCode:"A verification code has been sent to your email address. Enter it below to confirm you own this inbox.",verifyAndEnable:"Verify & Enable",emailDisablePasswordHint:"Enter your account password to confirm disabling email OTP.",passwordPlaceholder:"Enter your password",backupCodesTitle:"Save your backup codes",backupCodesWarning:"Save these codes somewhere safe. Each code can only be used once and they will not be shown again.",backupCodesRemaining:"{{count}} backup codes remaining",savedCodes:"I've saved my codes",regenBackup:"Regenerate Backup Codes",regenBackupHint:"Enter your current TOTP code to generate 10 new backup codes. All existing backup codes will be invalidated.",newBackupCodes:"New backup codes",linkedAccounts:"Linked SSO Accounts",linkedAccountsDesc:"These external identity providers are linked to your account.",oidcUnlinked:"Account unlinked."},oidc:{title:"SSO / OIDC Providers",desc:"Configure OpenID Connect providers to allow single sign-on via external identity providers.",addProvider:"Add Provider",newProvider:"New Provider",empty:"No OIDC providers configured yet.",created:"Provider created.",updated:"Provider updated.",deleted:"Provider deleted.",refreshIcon:"Refresh icon",removeIcon:"Remove icon",iconRefreshed:"Icon refreshed.",iconRemoved:"Icon removed.",iconFetchFailed:"Icon could not be fetched from the provider URL.",deleteTitle:"Delete Provider",deleteMessage:'Delete "{{name}}"? All linked user accounts will be disconnected.',form:{name:"Display Name",issuerUrl:"Issuer URL",clientId:"Client ID",clientSecret:"Client Secret",scopes:"Scopes",iconUrl:"Icon URL (optional)",enabled:"Enabled",autoCreate:"Auto-create users",autoCreateDesc:"Automatically create a local account on first login.",autoLink:"Auto-link existing accounts",autoLinkDesc:"Link existing local accounts by matching email on first login.",secretHint:"leave blank to keep current",secretPlaceholder:"new secret",emailClaim:"Email Claim",emailClaimDesc:"JWT claim used as email identity. Use 'preferred_username' or 'upn' for Azure Entra ID (which does not send email_verified). Only use trusted claim names.",emailClaimPlaceholder:"email",emailClaimCustomClaimAutoLinkWarning:"Custom claims are safe for auto-link only when the value is tenant-administered (e.g. Azure Entra ID upn / preferred_username). Do not enable auto-link if your IdP allows users to self-assert this claim.",requireEmailVerified:"Require email verified",requireEmailVerifiedDesc:"Only accept the email claim when the provider marks it as verified.",requireEmailVerifiedWarning:"Warning: email will be accepted even without verification. Use only with trusted providers.",requireEmailVerifiedAutoLink:"Disable auto-link first to change this setting.",defaultGroup:"Default Group",defaultGroupDesc:"Group assigned to auto-created users. Falls back to Viewers if not set.",defaultGroupViewersFallback:"Viewers (default)"}},encryption:{title:"MFA Encryption Status",enabledFromEnv:"At-rest encryption enabled (key from MFA_ENCRYPTION_KEY environment variable)",enabledFromFile:"At-rest encryption enabled (key loaded from data directory)",enabledGenerated:"At-rest encryption enabled with auto-generated key",notConfigured:"At-rest encryption not configured",notConfiguredDesc:"TOTP secrets and OIDC client_secrets are stored in plaintext. Set MFA_ENCRYPTION_KEY or restart Bambuddy with a writable data directory to auto-generate one.",allEncrypted:"All MFA secrets are encrypted at rest.",legacyRowsLabel:"Legacy plaintext rows",encryptedRowsLabel:"Encrypted rows",legacyRowsWarning:"{{count}} legacy plaintext row(s) detected. Re-save the OIDC provider or re-enroll the user’s authenticator app to migrate to encrypted storage.",backupHint:"The auto-generated key is stored at DATA_DIR/.mfa_encryption_key and is included in local backup ZIPs. Keep your backups secure or set MFA_ENCRYPTION_KEY explicitly.",decryptionBrokenTitle:"Encryption key missing",decryptionBrokenError:"{{count}} encrypted record(s) cannot be decrypted because the encryption key is no longer available. Restore the previous MFA_ENCRYPTION_KEY or DATA_DIR/.mfa_encryption_key to recover.",migrationErrorWarning:"{{count}} legacy row(s) failed to re-encrypt at startup. Check server logs and restart Bambuddy to retry."}},notification:{printStarted:{title:"Print Started",body:"{{printer}}: {{filename}} has started printing"},printCompleted:{title:"Print Completed",body:"{{printer}}: {{filename}} completed successfully"},printFailed:{title:"Print Failed",body:"{{printer}}: {{filename}} has failed"},printStopped:{title:"Print Stopped",body:"{{printer}}: {{filename}} was stopped"},printProgress:{title:"Print Progress",body:"{{printer}}: {{filename}} is {{percent}}% complete"},printerOffline:{title:"Printer Offline",body:"{{printer}} is offline"},printerError:{title:"Printer Error",body:"{{printer}}: {{error}}"},filamentLow:{title:"Low Filament",body:"{{printer}}: Filament is running low"},maintenanceDue:{title:"Maintenance Due",body:"{{printer}}: {{items}} need attention"}},errors:{generic:"Something went wrong",networkError:"Network error. Please check your connection.",notFound:"Not found",unauthorized:"Unauthorized",serverError:"Server error",validationError:"Please check your input",printerConnectionFailed:"Failed to connect to printer",saveFailed:"Failed to save changes",deleteFailed:"Failed to delete",loadFailed:"Failed to load data"},hmsErrors:{title:"Errors - {{name}}",noErrors:"No errors",viewOnWiki:"View on Bambu Lab Wiki",clearInstructions:"Clear errors on the printer to dismiss them here.",clearErrors:"Clear Errors",clearSuccess:"HMS errors cleared",clearFailed:"Failed to clear HMS errors"},mqttDebug:{title:"MQTT Debug Log",searchPlaceholder:"Search topic or payload...",noMessages:"No messages logged yet",startLoggingHint:'Click "Start Logging" to begin capturing MQTT messages',noMessagesMatch:"No messages match your filter",adjustFilterHint:"Try adjusting your search or filter criteria",incoming:"Incoming",outgoing:"Outgoing",loggingStopped:"Logging stopped",loggingActive:"Logging active - messages will auto-refresh",startLogging:"Start Logging",stopLogging:"Stop Logging",clearLog:"Clear Log",topic:"Topic",timestamp:"Timestamp",direction:"Direction",all:"All"},printerFiles:{title:"File Manager",storageUsed:"Used:",storageFree:"Free:",filterPlaceholder:"Filter files...",deleteButton:"Delete",deleteFiles:"Delete {{count}} Files",deleteFileConfirm:'Delete "{{name}}"? This cannot be undone.',deleteFilesConfirm:"Delete {{count}} selected files? This cannot be undone.",noFiles:"No files on printer",loadingFiles:"Loading files...",failedToLoad:"Failed to load files",toast:{filesDeleted:"Deleted {{count}} file(s)",deleteFailed:"Delete failed: {{error}}"}},confirm:{delete:"Are you sure you want to delete this?",unsavedChanges:"You have unsaved changes. Are you sure you want to leave?",clearQueue:"Are you sure you want to clear the queue?"},login:{title:"Bambuddy Login",subtitle:"Sign in to your account",username:"Username",usernamePlaceholder:"Enter your username",usernameOrEmail:"Username or Email",usernameOrEmailPlaceholder:"Username or @ Email",password:"Password",passwordPlaceholder:"Enter your password",signIn:"Sign in",signingIn:"Logging in...",rememberMe:"Remember Me",forgotPassword:"Forgot your password?",loginSuccess:"Logged in successfully",loginFailed:"Login failed",enterCredentials:"Please enter username and password",enterEmail:"Please enter your email address",oidcLoginFailed:"OIDC login failed",oidcErrors:{providerError:"The identity provider returned an error",missingParameters:"OIDC callback is missing required parameters",invalidState:"OIDC state is invalid or has already been used",stateExpired:"OIDC login session expired — please try again",providerNotFound:"OIDC provider not found",discoveryFailed:"Failed to fetch OIDC discovery document",invalidDiscovery:"OIDC discovery document is invalid",networkError:"Network error during OIDC token exchange",badResponse:"Unexpected response during OIDC token exchange",noIdToken:"OIDC provider did not return an ID token",validationFailed:"OIDC token validation failed",nonceMismatch:"OIDC nonce mismatch — possible replay attack",missingSubClaim:"OIDC token is missing the sub claim",noLinkedAccount:"No local account is linked to this OIDC identity",accountInactive:"Your account is inactive",userResolutionFailed:"Failed to resolve your account",internalError:"An internal error occurred during OIDC login",tokenExchangeFailed:"OIDC token exchange failed"},forgotPasswordTitle:"Forgot Password",forgotPasswordMessage:"If you've forgotten your password, please contact your system administrator to reset it.",forgotPasswordEmailMessage:"Enter your email address and we'll send you a new password.",emailAddress:"Email Address",emailPlaceholder:"your.email@example.com",cancel:"Cancel",sending:"Sending...",sendResetEmail:"Send Reset Email",howToReset:"How to reset your password:",resetStep1:"Contact your Bambuddy administrator",resetStep2:"Ask them to reset your password in User Management",resetStep3:"They can set a new temporary password for you",resetStep4:"Log in with the new password and change it in Settings",gotIt:"Got it",resetPassword:{title:"Set New Password",subtitle:"Enter and confirm your new password below.",newPassword:"New Password",newPasswordPlaceholder:"At least 8 characters",confirmPassword:"Confirm Password",confirmPasswordPlaceholder:"Repeat new password",saving:"Saving…",submit:"Set New Password",backToLogin:"Back to login",passwordsDoNotMatch:"Passwords do not match",passwordTooShort:"Password must be at least 8 characters",resetFailed:"Password reset failed. The link may have expired."},twoFA:{title:"Two-Factor Authentication",subtitle:"Your account is protected with 2FA. Enter the verification code below.",methodAuthenticator:"Authenticator App",methodEmail:"Email Code",methodBackup:"Backup Code",instructionsTotp:"Open your authenticator app and enter the 6-digit code for Bambuddy.",instructionsEmail:"A 6-digit code has been sent to your email address. It expires in 10 minutes.",instructionsEmailNotSent:"Click the button below to receive a verification code via email.",instructionsBackup:"Enter one of your 8-character backup recovery codes. Each code can only be used once.",sendCodeButton:"Send Code via Email",sendingCode:"Sending...",resendCode:"Resend code",codeLabel:"Verification Code",backupCodeLabel:"Backup Code",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"Verify",verifyingButton:"Verifying...",backToLogin:"← Back to login",orContinueWith:"or continue with",signInWith:"Sign in with {{provider}}",enterCode:"Please enter the verification code",sendCodeFailed:"Failed to send verification code",invalidCode:"Invalid code. Please try again."}},setup:{title:"Bambuddy Setup",subtitle:"Configure authentication for your Bambuddy instance",enableAuth:"Enable Authentication",adminAccount:"Admin Account",adminAccountDesc:"If admin users already exist, authentication will be enabled using the existing admin accounts. Leave the fields below empty to use existing admins, or enter new credentials to create a new admin user.",adminUsername:"Admin Username",adminPassword:"Admin Password",optionalIfAdminExists:"(optional if admin users exist)",adminUsernamePlaceholder:"Enter admin username (optional)",adminPasswordPlaceholder:"Enter admin password (optional)",confirmPassword:"Confirm Password",confirmPasswordPlaceholder:"Confirm admin password",settingUp:"Setting up...",completeSetup:"Complete Setup",toast:{authEnabledAdminCreated:"Authentication enabled and admin user created",authEnabledExistingAdmins:"Authentication enabled using existing admin users",setupCompleted:"Setup completed",enterBothCredentials:"Please enter both admin username and password, or leave both empty to use existing admin users",passwordsDoNotMatch:"Passwords do not match",passwordTooShort:"Password must be at least 6 characters"}},changePassword:{title:"Change Password",currentPassword:"Current Password",currentPasswordPlaceholder:"Enter current password",newPassword:"New Password",newPasswordPlaceholder:"Enter new password (min 6 characters)",confirmPassword:"Confirm New Password",confirmPasswordPlaceholder:"Confirm new password",passwordsDoNotMatch:"Passwords do not match",passwordTooShort:"Password must be at least 6 characters",changing:"Changing...",success:"Password changed successfully",failed:"Failed to change password"},plateAlert:{title:"Print Paused!",message:"Objects detected on build plate. The print has been automatically paused. Please clear the plate and resume the print.",understand:"I Understand"},camera:{title:"Camera View",invalidPrinterId:"Invalid printer ID",live:"Live",snapshot:"Snapshot",restartStream:"Restart stream",refreshSnapshot:"Refresh snapshot",fullscreen:"Fullscreen",exitFullscreen:"Exit fullscreen",connectingToCamera:"Connecting to camera...",capturingSnapshot:"Capturing snapshot...",connectionLost:"Connection lost",connectionFailed:"Camera connection failed",reconnecting:"Reconnecting in {{countdown}}s... (attempt {{attempt}}/{{max}})",reconnectNow:"Reconnect now",cameraUnavailable:"Camera unavailable",cameraUnavailableDesc:"Make sure the printer is powered on and connected.",noCamera:"No camera available",retry:"Retry",cameraStream:"Camera stream",zoomOut:"Zoom out",zoomIn:"Zoom in",resetZoom:"Reset zoom",recording:"Recording",startRecording:"Start Recording",stopRecording:"Stop Recording",chamberLight:"Toggle chamber light",unavailable:"Camera unavailable",diagnose:{button:"Diagnose",modalTitle:"Camera diagnostic",running:"Running diagnostic...",runFailed:"Diagnostic could not run: {{error}}",retry:"Run again",stage:{tcp_reachable:"Network reachability",first_frame:"Frame capture",live_stream_active:"Live stream active"},summary:{all_ok:"Camera is working. The diagnostic completed all stages successfully.",live_stream_active_healthy:"Camera is currently streaming with recent frames — no test needed.",printer_unreachable:"Printer is not reachable. Check the IP address, network connection, and that the printer is powered on.",camera_port_closed:"Printer is reachable but the camera port is closed. Make sure LAN-only mode and Developer Mode are enabled in the printer settings.",no_frame:"Connected to the camera but no frames were received. Try again, or check that the camera is enabled in the printer settings.",unknown_failure:"Camera diagnostic failed for an unknown reason. Check the support log for details."},meta:{protocol:"Protocol",port:"Port",profile:"Profile"}}},groups:{title:"Group Management",subtitle:"Manage permission groups for access control",backToSettings:"Back to Settings",createGroup:"Create Group",noPermission:"You do not have permission to access this page.",system:"System",noDescription:"No description",usersCount:"{{count}} users",permissionsCount:"{{count}} permissions",edit:"Edit",delete:"Delete",toast:{created:"Group created successfully",updated:"Group updated successfully",deleted:"Group deleted successfully",enterGroupName:"Please enter a group name"},modal:{editGroup:"Edit Group",createGroup:"Create Group",cancel:"Cancel",saving:"Saving...",creating:"Creating...",saveChanges:"Save Changes"},form:{groupName:"Group Name",groupNamePlaceholder:"Enter group name",systemGroupWarning:"System group names cannot be changed",description:"Description",descriptionPlaceholder:"Enter description (optional)",permissions:"Permissions ({{count}} selected)"},deleteModal:{title:"Delete Group",message:"Are you sure you want to delete this group? Users in this group will lose these permissions.",confirm:"Delete Group"},editor:{title:"Edit Group",createTitle:"Create Group",search:"Search permissions...",selectAll:"Select All",clearAll:"Clear All",permissionsSelected:"{{count}} selected",noResults:"No permissions match your search"}},users:{title:"User Management",subtitle:"Manage users and their access to your Bambuddy instance",backToSettings:"Back to Settings",createUser:"Create User",noPermission:"You do not have permission to access this page.",admin:"Admin",noGroups:"No groups",active:"Active",inactive:"Inactive",edit:"Edit",delete:"Delete",system:"System",noGroupsAvailable:"No groups available",table:{username:"Username",groups:"Groups",status:"Status",actions:"Actions"},toast:{created:"User created successfully",updated:"User updated successfully",deleted:"User deleted successfully",fillRequired:"Please fill in all required fields",passwordsDoNotMatch:"Passwords do not match",passwordTooShort:"Password must be at least 6 characters",ldapProvisioned:'Provisioned LDAP user "{{username}}"'},modal:{createUser:"Create User",editUser:"Edit User",cancel:"Cancel",creating:"Creating...",saving:"Saving...",saveChanges:"Save Changes",advancedAuthSubtitle:"with Advanced Authentication",tabsAriaLabel:"User source",localTab:"Local",ldapTab:"LDAP",ldapSearchLabel:"Search directory",ldapSearchPlaceholder:"Type a username, name, or email...",ldapMinChars:"Type at least 2 characters to search",ldapTypeToSearch:"Start typing to search the LDAP directory",ldapSearching:"Searching directory...",ldapNoResults:"No matching users in the directory",ldapSearchError:"Directory search failed. Check the LDAP server status.",ldapAlreadyProvisioned:"Already provisioned",ldapSelectedLabel:"Selected",ldapProvision:"Provision user",ldapProvisioning:"Provisioning...",ldapErrorProvision:"Provisioning failed. Check the LDAP server status and try again."},form:{username:"Username",usernamePlaceholder:"Enter username",email:"Email",emailPlaceholder:"user@example.com",password:"Password",passwordPlaceholder:"Enter password",confirmPassword:"Confirm Password",confirmPasswordPlaceholder:"Confirm password",newPasswordPlaceholder:"Enter new password",confirmNewPasswordPlaceholder:"Confirm new password",leaveBlankToKeep:"leave blank to keep current",groups:"Groups",optional:"optional",autoGeneratedPassword:"A secure password will be automatically generated and emailed to the user.",passwordManagedByAdvancedAuth:'Password is managed by Advanced Authentication. Use "Reset Password" to send a new password to the user via email.',resetPassword:"Reset Password",resettingPassword:"Resetting Password..."},deleteModal:{title:"Delete User",message:"Are you sure you want to delete this user? This action cannot be undone.",confirm:"Delete User"}},streamOverlay:{title:"Stream Overlay",invalidPrinterId:"Invalid printer ID",cameraStream:"Camera stream",progress:"Progress",eta:"ETA",printerIdle:"Printer is idle",printerOffline:"Printer offline",status:{printing:"Printing",paused:"Paused",finished:"Finished",failed:"Failed",idle:"Idle",unknown:"Unknown"}},profiles:{title:"Profiles",subtitle:"Manage your slicer presets and pressure advance calibrations",tabs:{bambuCloud:"Bambu Cloud",orcaCloud:"Orca Cloud",local:"Local Profiles",kprofiles:"K-Profiles"},orcaCloud:{connectedAs:"Connected as",logout:"Disconnect",noLogoutPermission:"You do not have permission to disconnect",noConnectPermission:"You do not have permission to connect to Orca Cloud",retry:"Retry",back:"Use a different sign-in method",connect:{title:"Connect to Orca Cloud",description:"Sign in to your Orca Cloud account to sync your slicer profiles into Bambuddy."},providers:{google:"Sign in with Google",apple:"Sign in with Apple",github:"Sign in with GitHub",email:"Sign in with email and password"},password:{title:"Sign in with email and password",email:"Email",emailPlaceholder:"you@example.com",password:"Password",submit:"Sign in"},paste:{title:"Finish signing in",step1:"A new tab opened with the Orca Cloud sign-in page. Sign in with your Orca account.",step2:'Your browser will be redirected to a "localhost" URL that fails to load. That is expected — the URL is what we need.',step3:"Copy the entire URL from your browser's address bar and paste it below.",signInUrl:"If the sign-in tab did not open, click this URL:",label:"Paste the callback URL here",placeholder:"http://localhost:41172/callback?code=...&state=...",submit:"Finish connecting"},profiles:{title:"Your Orca Cloud profiles ({{count}})",refresh:"Refresh",empty:"No profiles found in your Orca Cloud account yet."},toast:{connected:"Connected to Orca Cloud as {{email}}",disconnected:"Disconnected from Orca Cloud"},errors:{startFailed:"Could not start the Orca Cloud sign-in flow.",finishFailed:"Could not finish the Orca Cloud sign-in.",passwordFailed:"Could not sign in with that email and password.",passwordEmpty:"Please enter both your email and password.",emptyPaste:"Please paste the callback URL from your browser.",noCode:"That URL does not look like an Orca Cloud callback (no code parameter). Copy the full URL from your address bar."}},localProfiles:{title:"Local Profiles",subtitle:"Import and manage slicer presets from OrcaSlicer",import:"Import Profiles",importDesc:"Drop .bbscfg, .bbsflmt, .orca_filament, .zip, or .json files here",importing:"Importing...",search:"Search local presets...",noPresets:"No local presets yet",noSearchResults:"No presets match your search",badge:"Local",edit:"Edit",delete:"Delete",cancel:"Cancel",deleteConfirmTitle:"Delete Preset",deleteConfirm:"Are you sure you want to delete this preset? This cannot be undone.",source:"Source",inheritsFrom:"Inherits",filamentType:"Type",vendor:"Vendor",compatiblePrinters:"Printers",nozzleTemp:"Nozzle Temp",cost:"Cost",density:"Density",pressureAdvance:"Pressure Advance",filament:"Filament",process:"Process",printer:"Printer",toast:{importSuccess:"{{count}} preset(s) imported",importSkipped:"{{count}} preset(s) skipped (duplicates)",importError:"{{count}} error(s) during import",deleted:"Preset deleted",updated:"Preset updated"}},connectedAs:"Connected as",logout:"Logout",noLogoutPermission:"You do not have permission to logout",failedToLoad:"Failed to load profiles",retry:"Retry",time:{justNow:"Just now",minsAgo:"{{count}}m ago",hoursAgo:"{{count}}h ago",daysAgo:"{{count}}d ago"},toast:{loggedOut:"Logged out"},login:{title:"Connect to Bambu Cloud",subtitle:"Sync your slicer presets across devices",email:"Email",password:"Password",region:"Region",regionGlobal:"Global",regionChina:"China",verificationCode:"Verification Code",totpCode:"Authenticator Code",checkEmail:"Check your email ({{email}}) for a 6-digit code",enterTotpHint:"Enter the 6-digit code from your authenticator app",accessToken:"Access Token",accessTokenHint:"Paste your Bambu Cloud access token. China-region accounts must use this path (phone-bound — email login unavailable). See the wiki for how to retrieve the token from MakerWorld cookies.",back:"Back",loginButton:"Login",verifyButton:"Verify",setTokenButton:"Set Token",useToken:"Use access token instead",useEmail:"Login with email instead",toast:{loggedIn:"Logged in successfully",codeSent:"Verification code sent to your email",enterTotp:"Enter code from your authenticator app",tokenSet:"Token set successfully"}},presets:{myPreset:"My preset (editable)",duplicate:"Duplicate",editable:"Editable",failedToLoadDetails:"Failed to load preset details",deleteConfirm:"Delete this preset?",deleteWarning:'This will permanently delete "{{name}}" from Bambu Cloud. This cannot be undone.',noDuplicatePermission:"You do not have permission to duplicate presets",noEditPermission:"You do not have permission to edit presets",noDeletePermission:"You do not have permission to delete presets",types:{filament:"Filament preset",printer:"Printer preset",process:"Process preset"},toast:{deleted:"Preset deleted",created:"Preset created",updated:"Preset updated",duplicated:"Preset duplicated",fieldAdded:'Field "{{key}}" added',exported:"Preset exported"},baseLabel:"Base: {{name}}",currentLabel:"Current: {{name}}",newPreset:"New Preset",editPreset:"Edit Preset",duplicatePreset:"Duplicate Preset",createNewPreset:"Create New Preset",customizeSettings:"Customize settings for your new preset",compareWithBase:"Compare with base preset",compare:"Compare",basePreset:"Base Preset",selectBasePreset:"Select base preset...",presetName:"Preset Name",myCustomPreset:"My custom preset",inheritsFrom:"Inherits from",dropJsonToImport:"Drop JSON to import",tabs:{common:"Common",allFields:"All Fields"},availableFields:"Available Fields",searchFieldsPlaceholder:"Search fields...",noMatchingFields:"No matching fields",allFieldsAdded:"All fields added",addCustomField:"Add custom field",yourOverrides:"Your Overrides",noOverridesYet:"No overrides yet",clickFieldsToAdd:"Click fields on the left to add them",saveAsTemplate:"Save as template",jsonTip:"Tip: Drag & drop a .json file anywhere on this modal to import settings"},cloudView:{searchPlaceholder:"Search presets...",templates:"Templates",refresh:"Refresh",newPreset:"New Preset",clearFilters:"Clear filters",compareMode:"Compare Mode",selectAnotherPreset:"Select another {{type}} preset",clickTwoPresets:"Click two presets of the same type to compare",selectFirst:"1. Select first",selectSecond:"2. Select second",compareNow:"Compare Now",lastSynced:"Last synced:",showingCount:"Showing {{showing}} of {{total}} presets",noPresetsFound:"No presets found",columns:{filament:"Filament",process:"Process",printer:"Printer"},noFilamentPresets:"No filament presets",noProcessPresets:"No process presets",noPrinterPresets:"No printer presets",filters:{type:"Type",owner:"Owner",printer:"Printer",nozzle:"Nozzle",filament:"Filament",layer:"Layer",all:"All",myPresets:"My Presets",builtIn:"Built-in",process:"Process"},noTemplatesPermission:"You do not have permission to manage templates",noRefreshPermission:"You do not have permission to refresh profiles",noCreatePermission:"You do not have permission to create presets"},templates:{title:"Quick Templates",noTemplates:"No templates yet",createFirst:"Create templates from the preset editor",typeFilter:"Type:",deleteTitle:"Delete Template",deleteWarning:"This action cannot be undone",deleteConfirm:'Are you sure you want to delete "{{name}}"?',namePlaceholder:"Template name",descriptionPlaceholder:"Description",settingsJson:"Settings (JSON)",fieldsCount:"{{count}} fields",shownInModals:"Shown in modals",hiddenInModals:"Hidden in modals",apply:"Apply",toast:{deleted:"Template deleted",updated:"Template updated",created:"Template created",applied:"Template applied"}}},support:{debugLoggingActive:"Debug logging is active",manageLogs:"Manage",collectItem7:"Printer connectivity and firmware versions",collectItem8:"Integration status (Spoolman, MQTT, HA)",collectItem9:"Network interfaces (subnets only)",collectItem10:"Python package versions",collectItem11:"Database health checks",collectItem12:"Docker environment details",bundleGenerating:"Generating bundle...",bundleStepConnection:"Running printer connectivity checks",bundleStepVirtualPrinters:"Running virtual-printer setup checks",bundleStepLogScan:"Scanning recent logs for known issues",bundleStepBuild:"Building the support bundle ZIP"},fileManager:{title:"File Manager",subtitle:"Organize and manage your print files",uploadFiles:"Upload Files",newFolder:"New Folder",folderName:"Folder Name",folderNamePlaceholder:"e.g., Functional Parts",renameFile:"Rename File",renameFolder:"Rename Folder",invalidFilenameChar:'The character "{{char}}" is not allowed in print filenames. The printer SD card rejects: < > : " / \\ | ? *',moveFiles:"Move {{count}} File(s)",rootNoFolder:"Root (No Folder)",current:"current",linkFolder:"Link Folder",linkFolderDescription:'Link "{{name}}" to a project or archive for quick access.',project:"Project",archive:"Archive",noProjectsFound:"No projects found",noArchivesFound:"No archives found",unlink:"Unlink",link:"Link",dragDropFiles:"Drag & drop files here",dropFilesHere:"Drop files here",orClickToBrowse:"or click to browse",allFileTypesSupported:"All file types supported. ZIP files will be extracted.",zipFilesDetected:"ZIP files detected",zipExtractOptions:"ZIP files will be extracted. Choose how to handle folder structure:",preserveZipStructure:"Preserve folder structure from ZIP",createFolderFromZip:"Create folder from ZIP filename",stlThumbnailGeneration:"STL thumbnail generation",zipMayContainStl:"ZIP files may contain STL files. Thumbnails can be generated during extraction.",thumbnailsCanBeGenerated:"Thumbnails can be generated for STL files. Large models may take longer to process.",generateThumbnailsForStl:"Generate thumbnails for STL files",threemfDetected:"3MF files detected",threemfExtractionInfo:"Printer model, material, color, and print settings will be automatically extracted from 3MF files.",willBeExtracted:"Will be extracted",filesExtracted:"{{count}} files extracted",uploadComplete:"Upload complete: {{succeeded}} succeeded",uploadFailed:"Upload failed",zipFilesFailed:"{{count}} files failed",uploading:"Uploading...",changeLink:"Change Link...",linkTo:"Link to...",linkToProjectOrArchive:"Link to project or archive",addToQueue:"Add to Queue",schedulePrint:"Schedule",generateThumbnail:"Generate Thumbnail",generateThumbnails:"Generate Thumbnails",generateThumbnailsForMissing:"Generate thumbnails for STL files missing them",gridView:"Grid view",listView:"List view",lowDiskSpaceWarning:"Low disk space warning",lowDiskSpaceDetails:"Only {{free}} free of {{total}} total. Threshold is set to {{threshold}} GB in settings.",files:"Files",folders:"Folders",size:"Size",free:"Free",allFiles:"All Files",allExternal:"External",externalIsEmpty:"No external files",externalEmptyDescription:"Files in your linked external folders will appear here.",wrap:"Wrap",enableTextWrapping:"Enable text wrapping",disableTextWrapping:"Disable text wrapping",collapse:"Collapse",collapseFoldersByDefault:"Collapse folders by default",expandFoldersByDefault:"Expand folders by default",dragToResizeTooltip:"Drag to resize, double-click to reset",searchFiles:"Search files...",allTypes:"All types",prints:"Prints",ascending:"Ascending",descending:"Descending",resultsCount:"{{showing}} of {{total}} files",selectAll:"Select All",deselectAll:"Deselect All",selected:"{{count}} selected",adding:"Adding...",loadingFiles:"Loading files...",folderIsEmpty:"Folder is empty",noFilesYet:"No files yet",folderEmptyDescription:"Upload files or move files into this folder to get started.",noFilesDescription:"Upload files to start organizing your print-related files.",noMatchingFiles:"No matching files",noMatchingFilesDescription:"No files match your current search or filter criteria.",clearFilters:"Clear filters",printedCount:"Printed {{count}}x",uploadedBy:"Uploaded By",deleteFolder:"Delete Folder",deleteFile:"Delete File",deleteFilesCount:"Delete {{count}} Files",deleteFolderConfirm:"Are you sure you want to delete this folder? All files inside will also be deleted.",deleteFileConfirm:"Are you sure you want to delete this file?",deleteFilesConfirm:"Are you sure you want to delete {{count}} selected files? This action cannot be undone.",deleting:"Deleting...",noPermissionRenameFolder:"You do not have permission to rename folders",noPermissionLinkFolder:"You do not have permission to link folders",noPermissionDeleteFolder:"You do not have permission to delete folders",noPermissionPrint:"You do not have permission to print",noPermissionAddToQueue:"You do not have permission to add to queue",noPermissionSlice:"You do not have permission to slice files",noPermissionDownload:"You do not have permission to download files",noPermissionRenameFile:"You do not have permission to rename this file",noPermissionGenerateThumbnail:"You do not have permission to generate thumbnails",noPermissionDeleteFile:"You do not have permission to delete this file",noPermissionCreateFolder:"You do not have permission to create folders",noPermissionUpload:"You do not have permission to upload files",noPermissionMoveFiles:"You do not have permission to move files",noPermissionDeleteFiles:"You do not have permission to delete files",linkExternal:"Link External",linkExternalFolder:"Link External Folder",linkExternalFolderDescription:"Mount a host directory (NAS, USB, network share) into the File Manager. Files are not copied — they are accessed directly from the original path.",externalFolderNamePlaceholder:"e.g., NAS Prints",externalPath:"Host Path",externalPathHelp:"Absolute path to the directory on the Docker host. Must be bind-mounted into the container.",readOnly:"Read Only",readOnlyHelp:"prevents uploads and deletions",showHiddenFiles:"Show hidden files (dotfiles)",externalFolder:"External Folder",scanFolder:"Scan",toast:{folderCreated:"Folder created",folderDeleted:"Folder deleted",fileDeleted:"File deleted",filesDeleted:"Deleted {{count}} files",filesMoved:"Files moved",folderLinked:"Folder linked",folderUnlinked:"Folder unlinked",externalFolderLinked:"External folder linked and scanned",folderScanned:"Scan complete: {{added}} added, {{removed}} removed",addedToQueue:"Added {{count}} file(s) to queue",addedToQueuePartial:"Added {{added}} file(s), {{failed}} failed",failedToAddToQueue:"Failed to add files: {{error}}",fileRenamed:"File renamed",folderRenamed:"Folder renamed",thumbnailsGenerated:"Generated {{count}} thumbnail(s)",thumbnailsGeneratedPartial:"Generated {{succeeded}} thumbnail(s), {{failed}} failed",noStlMissingThumbnails:"No STL files missing thumbnails",failedToGenerateThumbnails:"Failed to generate thumbnails: {{error}}",thumbnailGenerated:"Thumbnail generated",failedToGenerateThumbnail:"Failed to generate thumbnail: {{error}}"}},projects:{title:"Projects",subtitle:"Organize and track your 3D printing projects",newProject:"New Project",editProject:"Edit Project",deleteProject:"Delete Project",projectName:"Project Name",description:"Description",noProjects:"No projects yet",noProjectsFiltered:"No {{status}} projects",noProjectsFilteredHelp:"You don't have any {{status}} projects. Projects will appear here when their status changes.",createFirst:"Create your first project to start organizing related prints, tracking progress, and managing your builds.",createFirstButton:"Create Your First Project",create:"Create",files:"Files",prints:"Prints",plates:"plates",parts:"parts",lastModified:"Last Modified",deleteConfirm:"Are you sure you want to delete this project? Archives and queue items will be unlinked but not deleted.",addFiles:"Add Files",removeFile:"Remove File",viewDetails:"View Details",namePlaceholder:"e.g., Voron 2.4 Build",descriptionPlaceholder:"Optional description...",urlLabel:"URL",urlPlaceholder:"https://makerworld.com/...",urlInvalid:"URL must start with http:// or https://",openExternalUrl:"Open project URL",coverImageLabel:"Cover photo",coverImageAlt:"Project cover photo",coverImageUpload:"Upload",coverImageReplace:"Replace",coverImageRemove:"Remove",color:"Color",targetPlates:"Target Plates",targetPlatesPlaceholder:"e.g., 25",targetPlatesHelp:"Number of print jobs",targetParts:"Target Parts",targetPartsPlaceholder:"e.g., 150",targetPartsHelp:"Total objects needed",tagsLabel:"Tags (comma-separated)",tagsPlaceholder:"e.g., voron, functional, gift",dueDate:"Due Date",priority:"Priority",priorityLow:"Low",priorityNormal:"Normal",priorityHigh:"High",priorityUrgent:"Urgent",statusActive:"Active",statusCompleted:"Completed",statusArchived:"Archived",done:"Done",completed:"completed",failed:"failed",inQueue:"in queue",noPrintsYet:"No prints yet",printJobs:"Print jobs (plates)",partsPrinted:"Parts printed",failedParts:"Failed parts",import:"Import",export:"Export",importProject:"Import project",exportAll:"Export all projects",loading:"Loading projects...",noEditPermission:"You do not have permission to edit projects",noDeletePermission:"You do not have permission to delete projects",noCreatePermission:"You do not have permission to create projects",noImportPermission:"You do not have permission to import projects",noExportPermission:"You do not have permission to export projects",toast:{created:"Project created",updated:"Project updated",deleted:"Project deleted",imported:"Project imported",multipleImported:"{{count}} projects imported",importFailed:"Import failed",exported:"Projects exported (metadata only)"}},projectDetail:{notFound:"Project not found",backToProjects:"Back to Projects",export:"Export",exportProject:"Export project",noExportPermission:"You do not have permission to export projects",noEditPermission:"You do not have permission to edit projects",partOf:"Part of:",priorityLabel:"Priority:",noPrints:"No prints in this project yet",status:{active:"Active",completed:"Completed",archived:"Archived"},priority:{low:"Low",normal:"Normal",high:"High",urgent:"Urgent"},dueDate:{overdue:"Overdue",today:"Due today",daysLeft:"{{count}} days left"},progress:{platesProgress:"Plates Progress",partsProgress:"Parts Progress",printJobs:"print jobs",parts:"parts",percentComplete:"{{percent}}% complete",remaining:"{{count}} remaining"},stats:{printJobs:"Print Jobs",total:"total",failed:"{{count}} failed",partsPrinted:"{{count}} parts printed",printTime:"Print Time",filamentUsed:"Filament Used"},cost:{title:"Cost Tracking",filamentCost:"Filament Cost",energy:"Energy",totalCost:"Total Cost",total:"Total",includesBom:"incl. BOM",budget:"Budget",remaining:"Remaining"},subProjects:{title:"Sub-projects ({{count}})"},notes:{title:"Notes",noEditPermission:"You do not have permission to edit notes",placeholder:"Add notes about this project...",empty:"No notes yet. Click Edit to add notes."},files:{title:"Files",linkFolders:"Link folders from the File Manager",forQuickAccess:"to this project for quick access.",fileCount:"{{count}} file(s)",empty:"No folders linked. Go to File Manager and link a folder to this project.",noFiles:"No files in this folder.",print:"Print Now",addToQueue:"Add to Queue"},bom:{title:"Bill of Materials",acquired:"{{completed}}/{{total}} acquired",showAll:"Show all",hideDone:"Hide done",addPart:"Add Part",noAddPermission:"You do not have permission to add parts",partNamePlaceholder:"Part name (e.g., M3x8 screws)",partName:"Part name",qty:"Qty",price:"Price ({{currency}})",sourcingUrlPlaceholder:"Sourcing URL (optional)",remarksPlaceholder:"Remarks (optional)",deletePart:"Delete Part",deleteConfirm:'Are you sure you want to delete "{{name}}"?',noUpdatePermission:"You do not have permission to update parts",noEditPermission:"You do not have permission to edit parts",noDeletePermission:"You do not have permission to delete parts",totalCost:"Total cost:",empty:"No parts in the bill of materials. Add hardware, electronics, or other components to track what needs to be sourced."},timeline:{title:"Activity Timeline",empty:"No activity yet."},template:{saveAsTemplate:"Save as Template",noCreatePermission:"You do not have permission to create templates"},queue:{title:"Queue",viewAll:"View all",printing:"{{count}} printing",queued:"{{count}} queued"},prints:{title:"Prints ({{count}})"},toast:{projectUpdated:"Project updated",partAdded:"Part added",partRemoved:"Part removed",exportFailed:"Export failed",projectExported:"Project exported",templateCreated:"Template created"}},system:{title:"System Information",version:"Version",uptime:"Uptime",cpuUsage:"CPU Usage",memoryUsage:"Memory Usage",diskUsage:"Disk Usage",networkInfo:"Network Info",logs:"Logs",debugMode:"Debug Mode",enableDebug:"Enable Debug Logging",disableDebug:"Disable Debug Logging",downloadLogs:"Download Logs",clearLogs:"Clear Logs",dockerInfo:"Docker Info",containerName:"Container Name",imageName:"Image Name",platform:"Platform",architecture:"Architecture"},library:{title:"Filament Library",addFilament:"Add Filament",editFilament:"Edit Filament",deleteFilament:"Delete Filament",vendor:"Vendor",material:"Material",color:"Color",kFactor:"K Factor",temperature:"Temperature",noFilaments:"No filaments in library",deleteConfirm:"Are you sure you want to delete this filament?",importFromPrinter:"Import from Printer",exportToFile:"Export to File"},slice:{title:"Slice model",action:"Slice",actionAll:"Slice all {{count}} plates",actionAllTitle:"Slice every plate into one multi-plate output (single archive). Filament selection covers every slot the project defines.",allPlatesToggle:"Slice all {{count}} plates",slicing:"Slicing…",printer:"Printer profile",process:"Process profile",filament:"Filament profile",filamentSlot:"Filament {{index}} ({{type}})",selectPreset:"— Select a preset —",loadingPresets:"Loading presets…",analyzingPlateFilaments:"Analyzing plate filaments…",analyzingPlateFilamentsHint:"Running a preview slice to discover which AMS slots this plate uses. Cached after — re-opening is instant.",previewToast:"Analyzing {{name}} — {{elapsed}}",previewWithProgress:"Analyzing {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",notUsedByPlate:"— not used by this plate",noPresetsForSlot:"No presets available",otherPrinters:"Other printers",presetsLoadFailed:"Failed to load presets. Open Settings → Profiles to import them first.",refreshPresets:"Refresh",refreshPresetsTitle:"Refresh presets — fetch the latest cloud and bundled listings (use after deleting a preset in Bambu Studio or Bambu Handy)",allPresetsRequired:"All presets must be selected",bundle:"Slicer bundle",bundleNone:"— None (pick presets individually) —",bundleAllRequired:"Bundle process and every filament slot must be picked",enqueuing:"Submitting slice job…",queued:"Queued…",failed:"Slicing failed. Check the slicer sidecar logs.",startedToast:"Slicing {{name}} in the background…",queuedToast:"Queued: {{name}} — {{elapsed}}",runningToast:"Slicing {{name}} — {{elapsed}}",runningWithProgress:"{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",runningWithProgressMultiPlate:"Plate {{plateIndex}} of {{plateCount}} • {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",completedToast:"Sliced {{name}}",failedTitle:"Slicing failed",failedToast:"Slicing {{name}} failed: {{detail}}",tier:{local:"Imported",cloud:"Bambu Cloud",orcaCloud:"Orca Cloud",standard:"Standard"},cloud:{notAuthenticated:"Sign in to Bambu Cloud (Settings → Profiles → Bambu Cloud) to see your cloud presets.",expired:"Bambu Cloud session expired — sign in again to refresh your cloud presets.",unreachable:"Bambu Cloud is unreachable right now. Local and standard presets still work."},orcaCloud:{notAuthenticated:"Sign in to Orca Cloud (Profiles → Orca Cloud) to see your Orca presets.",expired:"Orca Cloud session expired — sign in again to refresh your Orca presets.",unreachable:"Orca Cloud is unreachable right now. Other presets still work."},bedType:{label:"Build plate",auto:"Auto (use process preset)",coolPlate:"Cool Plate",coolPlateSuperTack:"Cool Plate SuperTack",engineering:"Engineering Plate",highTemp:"High Temp Plate",texturedPEI:"Textured PEI Plate",smoothPEI:"Smooth PEI Plate"}},spoolman:{title:"Spoolman Integration",enabled:"Spoolman Enabled",url:"Spoolman URL",connected:"Connected",disconnected:"Not Connected",testConnection:"Test Connection",sync:"Sync",syncing:"Syncing...",lastSync:"Last Sync",linkToSpoolman:"Link to Spoolman",openInSpoolman:"Open in Spoolman",unlinkSpool:"Unlink Spool",unlinkConfirmTitle:"Unassign Spool?",unlinkConfirmMessage:"This will remove the spool from this slot. The spool data itself will remain unchanged.",selectSpool:"Select Spool",noUnlinkedSpools:"No unassigned spools available",linkSuccess:"Spool assigned successfully",linkFailed:"Failed to assign spool",unlinkSuccess:"Spool unassigned successfully",unlinkFailed:"Failed to unassign spool",linkedSpool:"Assigned spool",spoolId:"Spool ID",fillSourceLabel:"(Spoolman)",weight:"Weight",remaining:"Remaining",disableWeightSync:"Disable AMS Estimated Weight Sync",disableWeightSyncDesc:"Don't update remaining capacity from AMS estimates. Use this if you prefer Spoolman's usage tracking over AMS percentage-based estimates. New spools will still use the AMS estimate as their initial weight.",reportPartialUsage:"Report Partial Usage for Failed Prints",reportPartialUsageDesc:"When a print fails or is cancelled, report the estimated filament used up to that point based on layer progress."},inventory:{title:"Spool Inventory",subtitle:"Manage your spools",spoolmanMixedContentTitle:"Spoolman can't load over HTTPS — mixed-content blocked by your browser",spoolmanMixedContentBody:"Bambuddy is served over HTTPS (via your reverse proxy), but your Spoolman URL is still plain HTTP. Browsers block mixed content for security, so the embedded Spoolman UI can't render. Spoolman needs to be reachable over HTTPS for this to work.",spoolmanMixedContentFixReverseProxy:"Put Spoolman behind the same reverse proxy as Bambuddy (Traefik / Nginx / Caddy) with HTTPS, then update the Spoolman URL in Settings to the new HTTPS address.",spoolmanMixedContentFixOpenNewTab:"As a workaround, open Spoolman in a new browser tab over HTTP — mixed-content rules only apply to embedded frames, so a standalone tab still works.",spoolmanOpenInNewTab:"Open Spoolman in a new tab",labels:{title:"Print spool labels",selectedCount:"{{count}} selected",pickSpools:"Pick which spools to print labels for:",searchPlaceholder:"Search name, brand, or #ID",filterByMaterial:"Material:",allMaterials:"All",selectVisible:"Select all visible ({{count}})",deselectVisible:"Deselect visible",clearAll:"Clear all",noSpoolsToShow:"No spools to show. Adjust your filter and try again.",noMatches:"No spools match the current search or filter.",printOne:"Print label for this spool",printLabels:"Print labels…",bulkTitle:"Pick spools to print labels for from the {{count}} currently shown",noSpoolsTitle:"No spools to label",error:"Could not generate labels: {{msg}}",sortBy:{label:"Sort:",id:"By ID",color:"By colour"},templates:{amsHolderSmall:{label:"AMS holder — small (74 × 33 mm)",hint:"Single label per page; matches the printable label from MakerWorld model 752566 (AMS Filament Label Holder)."},amsHolderLarge:{label:"AMS holder — large (75 × 55 mm)",hint:"Single label per page; fits the cardstock-insert variant of the AMS Filament Label Holder. Roomy enough for swatch, brand, material, ID, and QR code."},box40x30:{label:"Box label (40 × 30 mm)",hint:"Single label per page; common DK/Brother roll size, good for filament-bag and storage-bin labels."},box:{label:"Box label (62 × 29 mm)",hint:"Single label per page; sized for Brother PT/QL and Dymo small labels."},averyL7160:{label:"Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)",hint:"EU sheet stock; 21 labels per A4 page."},avery5160:{label:"Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)",hint:"US sheet stock; 30 labels per Letter page."}}},addSpool:"Add Spool",editSpool:"Edit Spool",copySpool:"Copy Spool",material:"Material",selectMaterial:"Select material...",subtype:"Subtype",brand:"Brand",searchBrand:"Search brand...",useCustomBrand:'Use "{{brand}}"',useCustomMaterial:"Use custom material: {{material}}",colorName:"Color Name",colorNamePlaceholder:"Jade White, Fire Red...",color:"Color",hexColor:"Hex Color",pickColor:"Pick custom color",labelWeight:"Label Weight",coreWeight:"Empty Spool Weight",searchSpoolWeight:"Search spool weight...",weightUsed:"Used",currentWeight:"Remaining Weight",measuredWeight:"Measured Weight",spoolName:"Spool",costPerKg:"Cost per kg",storageLocation:"Storage Location",storageLocationPlaceholder:"e.g. Shelf A, Drawer 1",openInInventory:"Open in Inventory",measuredWeightError:"Measured weight must be between {{min}}g and {{max}}g.",slicerFilament:"Slicer Filament",slicerFilamentName:"Slicer Preset Name",slicerPreset:"Slicer Preset",searchPresets:"Search filament presets...",selectedPreset:"Selected",noPresetsFound:"No presets found",tempOverrides:"Temperature Overrides",note:"Note",notePlaceholder:"Any additional notes about this spool...",category:"Category",categoryPlaceholder:"e.g. Production, Prototype, Client A",categoryNone:"Uncategorized",storageLocationNone:"No location set",lowStockThresholdOverride:"Low-stock threshold (this spool)",lowStockThresholdOverrideHelp:"Leave blank to use the global threshold ({{global}}%).",clearRfid:"Clear RFID Tag",rfidCleared:"RFID tag cleared",archive:"Archive",restore:"Restore",noSpools:"No spools yet. Add your first spool to get started.",noAvailableSpools:"No spools available. Add a spool to your inventory or unassign one from another slot first.",kProfiles:"K-Profiles",addKProfile:"Add K-Profile",assignSpool:"Assign Spool",unassignSpool:"Unassign",assignSuccess:"Spool assigned and AMS slot configured",assignFailed:"Failed to assign spool",selectSpool:"Select a spool to assign to this slot",assigned:"Assigned",assigning:"Assigning...",searchSpools:"Search spools...",showAllSpools:"Show all spools",spoolmanSpools:"Spoolman Spools",allMaterials:"All Materials",filterByBrand:"Filter by brand...",showArchived:"Show archived",quickAdd:"Quick Add (Stock)",quantity:"Quantity",stock:"Stock",configured:"Configured",spoolsCreated:"{{count}} spools created",spoolsPartiallyCreated:"{{created}} of {{total}} spools created (some failed)",spoolCreated:"Spool created",spoolUpdated:"Spool updated",spoolDeleted:"Spool deleted",deepLinkSpoolNotFound:"Spool not found",deepLinkFetchFailed:"Could not load spool — try again",spoolArchived:"Spool archived",spoolRestored:"Spool restored",kProfileSaveFailed:"K-profile settings could not be saved",syncWeightSpoolNotFound:"Spool not found — it may have been deleted",syncWeightSpoolmanUnreachable:"Spoolman is unreachable — try again later",syncWeightFailed:"Failed to sync weight",spoolmanUnreachable:"Spoolman is not reachable — please try again later",deleteSpoolNotFound:"Spool not found — it may have already been deleted",deleteFailed:"Failed to delete spool",archiveSpoolNotFound:"Spool not found — it may have already been deleted",archiveFailed:"Failed to archive spool",restoreSpoolNotFound:"Spool not found — it may have already been deleted",restoreFailed:"Failed to restore spool",saveFailed:"Failed to save changes",tagClearFailed:"Failed to clear tag",deleteConfirm:"Are you sure you want to delete this spool? This cannot be undone.",archiveConfirm:"Are you sure you want to archive this spool?",advancedSettings:"Advanced Settings",filamentInfoTab:"Filament Info",paProfileTab:"PA Profile",filamentInfo:"Filament",additional:"Additional",loadingPresets:"Loading cloud presets...",cloudConnected:"Cloud connected",cloudNotConnected:"Cloud not connected (using defaults)",recentColors:"Recent",searchColors:"Search colors...",searchResults:"Search results",allColors:"All colors",commonColors:"Common colors",showLess:"Show less",showAll:"Show all",noColorsFound:"No colors match your search",noResults:"No matches found",extraColorsLabel:"Extra colors",extraColorsPlaceholder:"EC984C,#6CD4BC,A66EB9,D87694",extraColorsHint:"Paste 2 to 8 hex stops, separated by commas. Renders as a gradient.",extraColorsInvalid:"Ignored invalid hex: {{tokens}}",colorEffectLabel:"Effect",colorEffect:{none:"None",sparkle:"Sparkle",wood:"Wood",marble:"Marble",glow:"Glow",matte:"Matte",silk:"Silk",galaxy:"Galaxy",rainbow:"Rainbow",metal:"Metal",translucent:"Translucent",gradient:"Gradient",dualColor:"Dual Color",triColor:"Tri Color",multicolor:"Multicolor"},selectMaterialFirst:"Please select a material first in the Filament Info tab.",noPrintersConfigured:"No printers configured. Add printers to use PA profiles.",matchingFilter:"Matching",anyBrand:"Any brand",anyVariant:"Any variant",autoSelect:"Auto-select",matches:"matches",match:"match",noMatches:"No matches",connected:"Connected",offline:"Offline",printerOffline:"Printer is offline. Connect to view calibration profiles.",noKProfilesMatch:"No K-profiles match the selected filament.",leftNozzle:"Left Nozzle",rightNozzle:"Right Nozzle",profilesSelected:"calibration profile(s) selected",totalInventory:"Total Inventory",totalConsumed:"Total Consumed",byMaterial:"By Material",inPrinter:"In Printer",lowStock:"Low Stock",sinceTracking:"Since tracking started",resetConsumedCounter:"Reset counter",resetConsumedCounterTooltip:"Zero the consumed-grams counter for this spool. Remaining weight is not changed.",resetConsumedCounterConfirm:"Reset this spool's consumed-grams counter to 0? Future prints will track from zero again. The spool itself, its remaining weight calculation, and your settings are not changed.",resetAllConsumedCounters:"Reset all counters",resetAllConsumedCountersTooltip:"Zero the consumed-grams counter on every spool. Remaining weights are not changed.",resetAllConsumedCountersConfirm:'Reset the consumed-grams counter to 0 on all {{count}} spools (archived ones included)? This clears the "Total Consumed" stat so future prints track from zero. Spools and remaining weights are not changed.',consumedCounterReset:"Counter reset",allConsumedCountersReset:"Counter reset for {{count}} spool(s)",resetConsumedCounterFailed:"Failed to reset counter",loadedInAms:"Loaded in AMS/Ext",remaining:"Remaining",weightCheck:"Weight Check",lastWeighed:"Last weighed",neverWeighed:"Never weighed",search:"Search spools...",showing:"Showing",to:"to",of:"of",show:"Show",spools:"spools",spool:"spool",page:"Page",noSpoolsMatch:"No results found",noSpoolsMatchDesc:"Try adjusting your search or filters to find what you're looking for.",active:"Active",archived:"Archived",all:"All",used:"Used",new:"New",clearFilters:"Clear filters",table:"Table",cards:"Cards",net:"Net",groupSimilar:"Group",groupedSpools:"{{count}} identical spools",groupedRows:"rows",columns:"Columns",configureColumns:"Configure Columns",configureColumnsDesc:"Drag to reorder columns or use arrows. Toggle visibility with the eye icon.",visible:"visible",reset:"Reset",cancel:"Cancel",applyChanges:"Apply Changes",moveUp:"Move up",moveDown:"Move down",hideColumn:"Hide column",showColumn:"Show column",linkToSpool:"Link to Spool",tagLinked:"Tag linked to spool",tagLinkFailed:"Failed to link tag",tagAlreadyLinked:"Tag already linked to another spool",unknownTag:"Unknown RFID tag detected",usageHistory:"Usage History",noUsageHistory:"No usage recorded yet",printName:"Print Name",weightConsumed:"Weight Consumed",clearHistory:"Clear",historyCleared:"Usage history cleared",fillSourceLabel:"(Inv)",lowStockThresholdError:"Threshold must be between 0.1 and 99.9",assignMismatchTitle:"Material mismatch",assignMismatchMessage:'The selected spool material "{{spoolMaterial}}" does not match the tray material "{{trayMaterial}}" for {{location}}. Assign anyway?',assignMismatchConfirm:"Assign Anyway",assignPartialMismatchMessage:'The spool material "{{spoolMaterial}}" is similar to but not exactly matching "{{trayMaterial}}" in {{location}}. Do you want to proceed?',assignProfileMismatchMessage:'The spool profile "{{spoolProfile}}" does not match the tray profile "{{trayProfile}}" in {{location}}. Do you want to proceed?',assignReconfigureNote:"The AMS slot will be reconfigured to use the spool's profile.",spoolmanFilamentCatalog:"Spoolman Filament Catalog",pickFromSpoolmanCatalog:"Pick from Spoolman catalog…",spoolmanFilamentSelected:"Filament selected from Spoolman catalog",spoolmanFilamentUnlinked:"Filament catalog link cleared",noSpoolmanFilaments:"No filaments found in Spoolman catalog",spoolmanFilamentColorSwatch:"Filament color",spoolWeightManagedBySpoolman:"Empty spool weight is managed per filament type in Spoolman",spoolmanCatalogLoadFailed:"Failed to load Spoolman filament catalog"},timelapse:{title:"Timelapse",create:"Create Timelapse",download:"Download",delete:"Delete",preview:"Preview",frameRate:"Frame Rate",quality:"Quality",processing:"Processing...",noTimelapses:"No timelapses available"},ams:{title:"AMS",slot:"Slot",empty:"Empty",emptySlot:"Empty slot",slotEmpty:"Empty",emptySlotReset:"No filament assigned",unknown:"Unknown",humidity:"Humidity",temperature:"Temperature",filamentType:"Filament Type",filamentColor:"Color",remaining:"Remaining",history:"AMS History",noHistory:"No history available",configureSlot:"Configure Slot",externalSpool:"External Spool",profile:"Profile",kFactor:"K Factor",fill:"Fill",configure:"Configure",used:"used",remainingUnit:"remaining"},printModal:{title:"Start Print",selectPrinter:"Select Printer",selectPlate:"Select Plate",filamentMapping:"Filament Mapping",totalCost:"Total cost:",slotRemainingShort:" - {{grams}}g left",printSettings:"Print Settings",bedLeveling:"Bed Leveling",flowCalibration:"Flow Calibration",vibrationCalibration:"Vibration Calibration",layerInspection:"First Layer Inspection",timelapse:"Timelapse",startPrint:"Start Print",addToQueue:"Add to Queue",cancel:"Cancel",noPrintersAvailable:"No printers available",printerBusy:"Printer is busy",printerOffline:"Printer is offline",sameTypeDifferentColor:"Same type, different color",filamentTypeNotLoaded:"Filament type not loaded",openCalendar:"Open calendar",leftNozzle:"L",rightNozzle:"R",leftNozzleTooltip:"Left nozzle",rightNozzleTooltip:"Right nozzle",filamentOverride:"Filament Override",filamentOverrideHint:"Optionally override filaments for model-based assignment. The scheduler will match against your selected filaments instead of the original 3MF values.",originalFilament:"Original",overrideWith:"Override with",resetToOriginal:"Reset to original",insufficientFilamentTitle:"Not enough filament",insufficientFilamentMessage:"Some assigned spools have less filament remaining than this print needs:",insufficientFilamentLine:"{{printer}} - {{slot}}: needs {{required}}g, remaining {{remaining}}g",printAnyway:"Print anyway",forceColorMatch:"Force color match",staggerPrinterStarts:"Stagger printer starts",staggerGroupSize:"Group size",staggerInterval:"Interval (min)",staggerPreview:"{{printers}} printers → {{groups}} groups of {{size}}, starting every {{interval}} min",staggerLastGroup:"last group: {{count}}",staggerTotal:"total: {{minutes}} min",staggerToPrinters:"Stagger to {{count}} printers",gcodeInjection:"Inject auto-print G-code"},backup:{includesEncryptionKey:"Local backups include the MFA encryption key file (DATA_DIR/.mfa_encryption_key) so a backup ZIP is self-contained. Treat the ZIP as sensitive — anyone with the file can decrypt the OIDC client secrets and TOTP secrets stored inside.",title:"Backup & Restore",createBackup:"Create Backup",restoreBackup:"Restore Backup",restoreDescription:"Replace all data from a backup file",downloadBackup:"Download Backup",uploadBackup:"Upload Backup",lastBackup:"Last Backup",autoBackup:"Auto Backup",backupNow:"Backup Now",restoreWarning:"Warning: Restoring a backup will overwrite all current data.",includeArchives:"Include Archives",includeSettings:"Include Settings",includeProfiles:"Include Profiles",backupSuccess:"Backup created successfully",restoreSuccess:"Backup restored successfully",backupFailed:"Backup failed",restoreFailed:"Restore failed",restoreNote:"Virtual Printer will be stopped during restore",githubBackup:"Git Backup",enabled:"Enabled",cloudLoginRequired:"Bambu Cloud login required. Sign in under Profiles → Cloud Profiles to enable GitHub backup.",cloudLoginRequiredShort:"Cloud login required",githubDescription:"Automatically sync your profiles to a private GitHub repository for backup and version history.",repoIsPrivate:"Repository is private — safe to back up to.",repoIsPublicWarning:"Repository is PUBLIC. Bambuddy backups include MQTT credentials, Home Assistant tokens, Prometheus tokens, your Bambu Cloud email, and printer access codes via K-profiles. Saving is blocked until you make the repository private in your provider's settings.",repoVisibilityUnknown:"Could not determine repository visibility. Bambuddy refuses to back up to anything not confirmed private; saving will be blocked.",repositoryUrl:"Repository URL",repoUrlPlaceholderGitHub:"https://github.com/username/repo-name",repoUrlPlaceholderGitea:"https://gitea.example.com/username/repo-name",repoUrlPlaceholderForgejo:"https://forgejo.example.com/username/repo-name",repoUrlPlaceholderGitLab:"https://gitlab.com/username/repo-name",allowInsecureHttp:"Allow insecure HTTP",allowInsecureHttpHint:"Enable for self-hosted instances on private networks without TLS",personalAccessToken:"Personal Access Token",tokenSaved:"(saved)",enterNewToken:"Enter new token to update",tokenHint:"Fine-grained token with Contents read/write permission",branch:"Branch",provider:"Git Provider",providerGitHub:"GitHub",providerGitLab:"GitLab",providerGitea:"Gitea",providerForgejo:"Forgejo",manualOnly:"Manual only",hourly:"Hourly",daily:"Daily",weekly:"Weekly",includeInBackup:"Include in backup",kProfiles:"K-Profiles",kProfilesDescription:"Pressure advance calibration from connected printers",noPrintersConnected:"No printers connected",printersConnected:"{{connected}}/{{total}} connected",cloudProfiles:"Cloud Profiles",cloudProfilesDescription:"Filament, printer, and process presets from Bambu Cloud",appSettings:"App Settings",appSettingsDescription:"Bambuddy configuration (complete database)",spoolInventory:"Spool Inventory",spoolInventoryDescription:"Filament spools, usage history, and cost tracking",printArchives:"Print Archives",printArchivesDescription:"Print history metadata (no gcode/3MF files)",lastBackupAt:"Last backup:",noBackupsYet:"No backups yet",next:"Next:",startingBackup:"Starting backup...",test:"Test",enableBackup:"Enable Backup",testConnection:"Test Connection",enterRepoUrl:"Enter repository URL",enterRepoAndToken:"Enter repository URL and access token",repoRequired:"Repository URL is required",tokenRequired:"Access token is required",githubBackupEnabled:"GitHub backup enabled",tokenUpdated:"Token updated",settingsSaved:"Settings saved",failedToSave:"Failed to save: {{message}}",backupCompleteFiles:"Backup complete - {{count}} files updated",backupSkippedNoChanges:"Backup skipped - no changes",backupFailed2:"Backup failed: {{message}}",clearedLogs:"Cleared {{count}} logs",failedToClearLogs:"Failed to clear logs: {{message}}",history:"History",clear:"Clear",date:"Date",status:"Status",commit:"Commit",localBackup:"Local Backup",localBackupDescription:"Create a complete backup of your Bambuddy data including the database, archives, uploads, and all files.",downloadBackupLabel:"Download Backup",completeBackupZip:"Complete backup: database + all files (ZIP)",download:"Download",preparingBackup:"Preparing backup...",creatingArchive:"Creating backup archive... This may take a while for large archives.",downloadingFile:"Downloading backup file...",backupDownloaded:"Backup downloaded successfully",failedToCreateBackup:"Failed to create backup: {{message}}",restore:"Restore",restoreReplacesAll:"Restore replaces all data.",restoreReplacesAllDetail:"Your current database and files will be completely replaced. A restart is required after restore.",restoreConfirmTitle:"Restore Backup",restoreConfirmMessage:'Are you sure you want to restore from "{{filename}}"? This will completely replace your current database and all files. The application will need to be restarted after restore.',restoreConfirmButton:"Restore Backup",uploadingFile:"Uploading backup file...",backupRestoredRestart:"Backup restored. Please restart Bambuddy.",failedToRestore:"Failed to restore backup. Please check the file format.",reloadNow:"Reload Now",creatingBackup:"Creating Backup",restoringBackup:"Restoring Backup",preparing:"Preparing...",processing:"Processing...",doNotClosePage:"Please do not close this page or navigate away. This operation may take several minutes for large backups.",restoring:"Restoring...",restoreComplete:"Restore Complete",restoreFailed2:"Restore Failed",importSettings:"Import settings from a backup file",pleaseWaitRestoring:"Please wait while your data is being restored",selectBackupFile:"Click to select backup file (.json or .zip)",duplicateHandling:"How duplicate handling works:",matchPrinters:"Printers",matchPrintersBy:"matched by serial number",matchSmartPlugs:"Smart Plugs",matchSmartPlugsBy:"matched by IP address",matchNotificationProviders:"Notification Providers",matchNotificationProvidersBy:"matched by name",matchFilaments:"Filaments",matchFilamentsBy:"matched by name + type + brand",matchArchives:"Archives",matchArchivesBy:"matched by content hash (always skipped)",matchPendingUploads:"Pending Uploads",matchPendingUploadsBy:"matched by filename",matchSettingsTemplates:"Settings & Templates",matchSettingsTemplatesBy:"always overwritten",replaceExisting:"Replace existing data",keepExisting:"Keep existing data",overwriteDescription:"Overwrite items that already exist with backup data",keepDescription:"Only restore items that don't already exist",overwriteCaution:"Caution:",overwriteWarning:"Overwriting will replace your current configurations with data from the backup. Printer access codes are never overwritten for security.",cancel:"Cancel",processingBackup:"Processing backup file...",itemsRestored:"Items Restored",itemsSkipped:"Items Skipped",restored:"Restored",skippedAlreadyExist:"Skipped (already exist)",filesCategory:"Files (3MF, thumbnails, etc.)",andMore:"...and {{count}} more",newApiKeysGenerated:"New API Keys Generated",keysShownOnce:"These keys are only shown once. Copy them now!",copy:"Copy",noDataFound:"No data was found to restore in the backup file.",close:"Close",scheduledBackup:"Scheduled Backups",scheduledBackupDescription:"Automatically create backup snapshots on a schedule. Output directory can be mounted to a NAS or external storage.",frequency:"Frequency",backupTime:"Time",retention:"Retention",retentionDescription:"Number of backups to keep",outputPath:"Output Path",outputPathPlaceholder:"Default: {{path}}",outputPathDescription:"Leave empty for default location",runNow:"Run Now",backupFiles:"Backup Files",noScheduledBackups:"No backups yet",deleteBackup:"Delete",deleteBackupConfirm:"Delete this backup file?",backupRunning:"Backup in progress...",scheduledBackupComplete:"Backup completed successfully",scheduledBackupFailed:"Backup failed",nextBackup:"Next backup",backupSize:"Size",localTimeHint:"Local time ({{tz}})",defaultPathLabel:"Default:",categories:{settings:"Settings",notification_providers:"Notification Providers",notification_templates:"Notification Templates",smart_plugs:"Smart Plugs",printers:"Printers",filaments:"Filaments",maintenance_types:"Maintenance Types",archives:"Archives",projects:"Projects",pending_uploads:"Pending Uploads",external_links:"External Links",api_keys:"API Keys"}},tags:{title:"Tags",addTag:"Add Tag",editTag:"Edit Tag",deleteTag:"Delete Tag",tagName:"Tag Name",tagColor:"Tag Color",noTags:"No tags",deleteConfirm:"Are you sure you want to delete this tag?",manageTags:"Manage Tags"},uploadModal:{title:"Upload 3MF Files",dragDrop:"Drag & drop .3mf files here",or:"or",browseFiles:"Browse Files",extractionInfo:"The printer model will be automatically extracted from the 3MF file metadata.",uploaded:"uploaded",failed:"failed",uploading:"Uploading...",upload:"Upload",uploadFailed:"Upload failed"},editArchive:{title:"Edit Archive",name:"Name",namePlaceholder:"Print name",printer:"Printer",noPrinter:"No printer",project:"Project",noProject:"No project",itemsPrinted:"Items Printed",itemsPrintedHelp:"Number of items produced in this print job",notes:"Notes",notesPlaceholder:"Add notes about this print...",externalLink:"External Link",externalLinkPlaceholder:"https://printables.com/model/...",externalLinkHelp:"Link to Printables, Thingiverse, or other source",tags:"Tags",tagsPlaceholder:"Add tags...",addMoreTags:"Add more tags...",matchingTags:'Matching "{{query}}"',existingTags:"Existing tags",clickToAdd:"(click to add)",status:"Status",failureReason:"Failure Reason",selectReason:"Select reason...",photos:"Photos of Printed Result",photosHelp:"Click + to add photos of your printed result",printResult:"Print result",saving:"Saving...",failureReasons:{adhesionFailure:"Adhesion failure",spaghettiDetached:"Spaghetti / Detached",layerShift:"Layer shift",cloggedNozzle:"Clogged nozzle",filamentRunout:"Filament runout",warping:"Warping",stringing:"Stringing",underExtrusion:"Under-extrusion",powerFailure:"Power failure",userCancelled:"User cancelled",other:"Other"},statuses:{completed:"Completed",failed:"Failed",aborted:"Cancelled",printing:"Printing"}},kProfiles:{title:"K-Profiles",noPrintersConfigured:"No Printers Configured",addPrinterInSettings:"Add a printer in Settings to manage K-profiles",noActivePrinters:"No Active Printers",enablePrinterConnection:"Enable a printer connection to view its K-profiles",loadingProfiles:"Loading K-Profiles...",printerOffline:"Printer Offline",printerOfflineDesc:"The selected printer is not connected. Power it on to view K-profiles.",noMatchingProfiles:"No Matching Profiles",noMatchingProfilesDesc:"No profiles match your search criteria",noKProfiles:"No K-Profiles",noKProfilesDesc:"No pressure advance profiles found for {{diameter}}mm nozzle",createFirstProfile:"Create First Profile",printer:"Printer",nozzle:"Nozzle",refresh:"Refresh",addProfile:"Add Profile",export:"Export",import:"Import",select:"Select",selectAll:"Select All",delete:"Delete",searchPlaceholder:"Search by name or filament...",allExtruders:"All Extruders",leftOnly:"Left Only",rightOnly:"Right Only",allFlow:"All Flow",hfOnly:"HF Only",sOnly:"S Only",sortName:"Sort: Name",sortKValue:"Sort: K-Value",sortFilament:"Sort: Filament",leftExtruder:"Left Extruder",rightExtruder:"Right Extruder",modal:{addTitle:"Add K-Profile",editTitle:"Edit K-Profile",profileName:"Profile Name",profileNamePlaceholder:"My PLA Profile",kValue:"K-Value",kValuePlaceholder:"0.020",kValueHelp:"Typical range: 0.01 - 0.06 for PLA, 0.02 - 0.10 for PETG",filament:"Filament",selectFilament:"Select filament...",noFilamentsHelp:"No filaments found. Create a K-profile in Bambu Studio first.",flowType:"Flow Type",highFlow:"High Flow",standard:"Standard",nozzleSize:"Nozzle Size",extruder:"Extruder",extruders:"Extruders",left:"Left",right:"Right",notes:"Notes (stored locally)",notesPlaceholder:"Add notes about this profile...",notesHelp:"Notes are saved in Bambuddy, not on the printer",syncing:"Syncing with printer...",savingExtruder:"Saving to extruder {{current}}/{{total}}...",pleaseWait:"Please wait"},deleteConfirm:{title:"Delete Profile",cannotUndo:"This cannot be undone",message:'Are you sure you want to delete "{{name}}" from the printer?'},bulkDelete:{title:"Delete Profiles",cannotUndo:"This cannot be undone",message:"Are you sure you want to delete {{count}} selected profiles from the printer?"},toast:{profileSaved:"K-profile saved",profilesSaved:"K-profile saved to {{count}} extruders",selectAtLeastOneExtruder:"Please select at least one extruder",profileDeleted:"K-profile deleted",profilesDeleted:"Deleted {{count}} profiles",exportedProfiles:"Exported {{count}} profiles",importedProfiles:"Imported {{count}} of {{total}} profiles",noProfilesToExport:"No profiles to export",invalidFileFormat:"Invalid file format",failedToParseImport:"Failed to parse import file",failedToSaveBatch:"Failed to save K-profiles",noteSaved:"Note saved",failedToSaveNote:"Failed to save note"},permission:{noRead:"You do not have permission to refresh profiles",noCreate:"You do not have permission to add profiles",noUpdate:"You do not have permission to update K-profiles",noDelete:"You do not have permission to delete K-profiles",noExport:"You do not have permission to export profiles",noImport:"You do not have permission to import profiles"}},virtualPrinter:{title:"Virtual Printer",running:"Running",stopped:"Stopped",description:{default:"Enable a virtual printer that appears in Bambu Studio and OrcaSlicer. Files sent to this printer will be archived directly without printing.",proxy:"Enable a proxy that relays slicer traffic to a real printer, allowing remote printing over any network."},enable:{title:"Enable Virtual Printer",visibleInSlicer:'Visible as "Bambuddy" in slicer discovery',proxyingTo:"Proxying to {{name}}",notActive:"Not active"},model:{title:"Printer Model",description:"Select which printer model to emulate.",restartWarning:"Changing the model will restart the virtual printer"},accessCode:{title:"Access Code",isSet:"Access code is set",notSet:"No access code set - required to enable",placeholder:"Enter 8-char code",placeholderChange:"Enter new code to change",hint:"Must be exactly 8 characters. Used by slicers to authenticate.",charCount:"({{count}}/8)"},targetPrinter:{title:"Target Printer",configured:"Proxy target configured",notConfigured:"No target printer selected - required for proxy mode",placeholder:"Select a printer...",hint:"Select the printer to proxy slicer traffic to. The printer must be in LAN mode.",noPrinters:"No printers configured. Add a printer first to use proxy mode."},remoteInterface:{title:"Network Interface Override",configured:"Interface override active",optional:"Optional - use if auto-detected IP is wrong (e.g. multiple NICs, Docker, VPN)",placeholder:"Auto-detect (default)...",hint:"Override the IP address advertised via SSDP and used in the TLS certificate. Useful when Bambuddy has multiple network interfaces."},mode:{title:"Mode",archive:"Archive",archiveDesc:"Archive files immediately",review:"Review",reviewDesc:"Review before archiving",queue:"Queue",queueDesc:"Archive and add to queue",proxy:"Proxy",proxyDesc:"Relay to real printer"},autoDispatch:{title:"Auto-dispatch",description:"Automatically start prints when added to queue. When off, prints wait for manual dispatch."},queueForceColorMatch:{title:"Force color match",description:"Refuse to dispatch onto a printer that does not have the exact filament type and color loaded. Off by default — without this, the queue uses model-only matching and may pick a printer with the wrong color loaded."},tailscaleDisabled:{title:"Tailscale integration",description:"Enable to mark this VP as exposed over Tailscale. Shows the host's Tailscale address so you know which IP to paste into the slicer. The CA-import step is unchanged — this toggle has no effect on certificates."},setupRequired:{title:"Setup Required",description:"The virtual printer feature requires additional system configuration before it will work. This includes port forwarding, firewall rules, and platform-specific settings.",readGuide:"Read the setup guide before enabling"},archiveNameSource:{title:"Archive name source",description:'Choose how new archives are named when files arrive via the virtual printer. "Metadata" uses the slicer-embedded title from the 3MF (default). "Filename" uses the filename Bambu Studio sent over FTP — handy if you renamed the job in the "send to printer" dialog.',metadata:"Metadata",filename:"Filename"},caCert:{title:"Slicer certificate",description:"Virtual printers use a TLS certificate signed by the Bambuddy CA. Import this CA certificate into your slicer's trust store once so it accepts the connection — no need to copy it from the command line.",copy:"Copy",copied:"Copied",download:"Download",fingerprint:"SHA-256"},howItWorks:{title:"How it works",step1:"On the same LAN, virtual printers appear in your slicer (Bambu Studio / OrcaSlicer) automatically via discovery. From other networks, add them manually by IP address and access code.",step2:'In Archive, Review, and Queue modes, use the "Send" button in your slicer to upload 3MF files to Bambuddy. The slicer will show "Print success" — the file is stored, not printed.',step3:"In Proxy mode, the virtual printer relays all traffic to a real printer — prints start immediately as if connected directly."},status:{title:"Status Details",printerName:"Printer Name",model:"Model",serialNumber:"Serial Number",mode:"Mode",pendingFiles:"Pending Files",targetPrinter:"Target Printer",ftpPort:"FTP Port",mqttPort:"MQTT Port",ftpConnections:"FTP Connections",mqttConnections:"MQTT Connections"},toast:{updated:"Virtual printer settings updated",failedToUpdate:"Failed to update settings",copyFailed:"Failed to copy — try selecting the text manually",accessCodeRequired:"Please set an access code first",targetPrinterRequired:"Please select a target printer first",bindIpRequired:"Please set a bind IP first",accessCodeEmpty:"Access code cannot be empty",accessCodeLength:"Access code must be exactly 8 characters",created:"Virtual printer created",failedToCreate:"Failed to create virtual printer",deleted:"Virtual printer deleted",failedToDelete:"Failed to delete virtual printer"},list:{title:"Virtual Printers",add:"Add",addFirst:"Add Virtual Printer",empty:"No virtual printers configured. Add one to get started."},bindIp:{title:"Bind Interface",placeholder:"Select interface...",hint:"Network interface for this virtual printer to bind to. Must be unique per printer."},proxy:{accessCodeHint:"In proxy mode, use your target printer's access code in the slicer. The connection is forwarded transparently to the real printer."},addDialog:{title:"Add Virtual Printer",name:"Name",hint:"You can configure access code, target printer, and other settings after creating.",create:"Create"},deleteConfirm:{title:"Delete Virtual Printer",message:'Are you sure you want to delete "{{name}}"? This will stop all services for this printer.'}},modelViewer:{openInSlicer:"Open in Slicer",tabs:{model:"3D Model",gcode:"G-code Preview"},notAvailable:"not available",notSliced:"not sliced",plates:"Plates",allPlates:"All Plates",plateNumber:"Plate {{number}}",plateCount:"{{count}} plate",plateCount_other:"{{count}} plates",objectCount:"{{count}} object",objectCount_other:"{{count}} objects",filamentCount:"{{count}} filament",filamentCount_other:"{{count}} filaments",eta:"ETA {{minutes}} min",noPreview:"No preview available for this file",pagination:{pageOf:"Page {{current}} of {{total}}",prev:"Prev",next:"Next"},errors:{failedToLoad:"Failed to load file",noMeshes:"No meshes found in 3MF file",unsupportedFormat:"Unsupported file format"}},maintenanceDescriptions:{lubricateCarbonRods:"Apply lubricant to carbon rods for smooth motion",lubricateRails:"Apply lubricant to linear rails for smooth motion",cleanNozzle:"Clean hotend and nozzle to prevent clogs",checkBelts:"Verify belt tension for accurate prints",cleanBuildPlate:"Clean build plate for better adhesion",checkExtruder:"Inspect extruder gears for wear",checkCooling:"Ensure cooling fans are working properly",generalInspection:"General printer inspection",cleanCarbonRods:"Clean carbon rods to reduce friction",lubricateSteelRods:"Apply lubricant to steel rods for smooth motion",cleanSteelRods:"Clean steel rods to reduce friction",cleanLinearRails:"Wipe linear rails to remove dust and debris",checkPtfeTube:"Inspect PTFE tube for wear or damage",replaceHepaFilter:"Replace HEPA filter for air quality",replaceCarbonFilter:"Replace activated carbon filter",lubricateLeftNozzleRail:"Lubricate left nozzle rail (H2 series)"},smartPlugs:{offline:"Offline",admin:"Admin",openPlugAdminPage:"Open plug admin page",deleteSmartPlug:"Delete Smart Plug",turnOnSmartPlug:"Turn On Smart Plug",turnOffSmartPlug:"Turn Off Smart Plug",turnOn:"Turn On",turnOff:"Turn Off",addSmartPlug:{scanningNetwork:"Scanning network...",chooseEntity:"Choose an entity...",connectionFailed:"Connection failed",searchEntities:"Search entities...",searchPowerSensors:"Search power sensors...",searchEnergySensors:"Search energy sensors...",placeholders:{plugName:"Living Room Plug",mqttStateOnValue:"ON, true, 1",mqttSameAsPower:"Same as power topic, or different"}},linkedTo:"Linked to:",monitorOnly:"Monitor Only",alerts:"Alerts",scheduleOn:"On {{time}}",scheduleOff:"Off {{time}}",on:"On",off:"Off",power:"Power",kwhToday:"kWh Today",settings:"Settings",automationSettings:"Automation Settings",showInSwitchbar:"Show in Switchbar",quickAccessSidebar:"Quick access from sidebar",enabled:"Enabled",enableAutomation:"Enable automation for this plug",autoOn:"Auto On",autoOnDescription:"Turn on when print starts",autoOff:"Auto Off",autoOffDescription:"Turn off when print completes (one-shot)",autoOffPersistent:"Keep Enabled",autoOffPersistentDescription:"Stay enabled between prints instead of one-shot",autoOffAfterDrying:"Auto Off After Drying",autoOffAfterDryingDescription:"Turn off when AMS drying completes",delayAfterDryingMinutes:"Drying delay (minutes)",turnOffDelayMode:"Turn Off Delay Mode",time:"Time",temp:"Temp",delayMinutes:"Delay (minutes)",tempThreshold:"Temperature threshold (°C)",tempThresholdDescription:"Turns off when nozzle cools below this temperature",edit:"Edit",deleteConfirm:'Are you sure you want to delete "{{name}}"? This cannot be undone.',turnOnConfirm:'Are you sure you want to turn on "{{name}}"?',turnOffConfirm:'Are you sure you want to turn off "{{name}}"? This will cut power to the connected device.',failedToTurn:'Failed to turn {{action}} "{{name}}"',unknown:"Unknown",addTitle:"Add Smart Plug",editTitle:"Edit Smart Plug",stopScanning:"Stop Scanning",discoverTasmota:"Discover Tasmota Devices",foundDevices:"Found {{count}} device(s) - click to select:",noDevicesFound:"No Tasmota devices found on your network",haNotConfigured:"Home Assistant is not configured. Set it up in",haSettingsPath:"Settings → Network → Home Assistant",selectEntity:"Select Entity *",ipAddress:"IP Address *",nameLabel:"Name *",username:"Username",password:"Password",authHint:"Leave empty if your Tasmota device doesn't require authentication",linkToPrinter:"Link to Printer",noPrinter:"No printer (manual control only)",linkingDescription:"Linking enables automatic on/off when prints start/complete",powerAlerts:"Power Alerts",alertAbove:"Alert if above (W)",alertBelow:"Alert if below (W)",alertDescription:"Get notified when power consumption crosses these thresholds. Leave empty to disable that direction.",dailySchedule:"Daily Schedule",turnOnAt:"Turn On at",turnOffAt:"Turn Off at",scheduleDescription:"Automatically turn the plug on/off at these times daily. Leave empty to skip that action.",showOnPrinterCard:"Show on Printer Card",displayOnPrinterCard:"Display button on printer card",connectedResult:"Connected!",deviceLabel:"Device: {{name}} - ",stateLabel:"State: {{state}}",test:"Test",delete:"Delete",save:"Save",add:"Add",cancel:"Cancel",failedToStartScan:"Failed to start scan",nameRequired:"Name is required",entityRequired:"Entity is required for Home Assistant plugs",mqttTopicRequired:"At least one MQTT topic must be configured for power, energy, or state monitoring",loadingEntities:"Loading entities...",loading:"Loading...",failedToLoadEntities:"Failed to load entities: {{error}}",noEntitiesMatching:'No entities found matching "{{search}}"',noEntitiesAvailable:"No entities available",searchingEntities:"Searching all entities ({{count}} found)",showingEntities:"Showing switch, light, input_boolean ({{count}} available)",energyMonitoringOptional:"Energy Monitoring (Optional)",energyMonitoringHint:"Search and select sensors that provide power/energy data.",powerSensorW:"Power Sensor (W)",energyTodayKwh:"Energy Today (kWh)",totalEnergyKwh:"Total Energy (kWh)",noMatchingSensors:"No matching sensors",none:"None",mqttNotConfigured:"MQTT broker not configured. Set broker address in",mqttSettingsPath:"Settings → Network → MQTT Publishing",mqttNotConfiguredSuffix:"(you don't need to enable publishing, just fill in the broker details).",mqttMonitorOnlyDescription:"MQTT plugs receive power/energy data via MQTT subscription. On/off control is not available - use your MQTT broker or home automation system.",powerMonitoring:"Power Monitoring",energyMonitoring:"Energy Monitoring",stateMonitoring:"State Monitoring",optional:"optional",topic:"Topic",jsonPath:"JSON Path",multiplier:"Multiplier",onValue:"ON Value",mqttPowerHint:`JSON path extracts value from JSON payload (e.g., "power_l1"). Leave empty if topic publishes raw numeric values.
+`).replace(jue,"")}function XH(h,w){return w=QH(w),QH(h)===w}function tn(h,w,_,M,W,ee){switch(_){case"children":typeof M=="string"?w==="body"||w==="textarea"&&M===""||yi(h,M):(typeof M=="number"||typeof M=="bigint")&&w!=="body"&&yi(h,""+M);break;case"className":Ve(h,"class",M);break;case"tabIndex":Ve(h,"tabindex",M);break;case"dir":case"role":case"viewBox":case"width":case"height":Ve(h,_,M);break;case"style":Pd(h,M,ee);break;case"data":if(w!=="object"){Ve(h,"data",M);break}case"src":case"href":if(M===""&&(w!=="a"||_!=="href")){h.removeAttribute(_);break}if(M==null||typeof M=="function"||typeof M=="symbol"||typeof M=="boolean"){h.removeAttribute(_);break}M=dr(""+M),h.setAttribute(_,M);break;case"action":case"formAction":if(typeof M=="function"){h.setAttribute(_,"javascript:throw new Error('A React form was unexpectedly submitted. If you called form.submit() manually, consider using form.requestSubmit() instead. If you\\'re trying to use event.stopPropagation() in a submit event handler, consider also calling event.preventDefault().')");break}else typeof ee=="function"&&(_==="formAction"?(w!=="input"&&tn(h,w,"name",W.name,W,null),tn(h,w,"formEncType",W.formEncType,W,null),tn(h,w,"formMethod",W.formMethod,W,null),tn(h,w,"formTarget",W.formTarget,W,null)):(tn(h,w,"encType",W.encType,W,null),tn(h,w,"method",W.method,W,null),tn(h,w,"target",W.target,W,null)));if(M==null||typeof M=="symbol"||typeof M=="boolean"){h.removeAttribute(_);break}M=dr(""+M),h.setAttribute(_,M);break;case"onClick":M!=null&&(h.onclick=Kt);break;case"onScroll":M!=null&&wr("scroll",h);break;case"onScrollEnd":M!=null&&wr("scrollend",h);break;case"dangerouslySetInnerHTML":if(M!=null){if(typeof M!="object"||!("__html"in M))throw Error(n(61));if(_=M.__html,_!=null){if(W.children!=null)throw Error(n(60));h.innerHTML=_}}break;case"multiple":h.multiple=M&&typeof M!="function"&&typeof M!="symbol";break;case"muted":h.muted=M&&typeof M!="function"&&typeof M!="symbol";break;case"suppressContentEditableWarning":case"suppressHydrationWarning":case"defaultValue":case"defaultChecked":case"innerHTML":case"ref":break;case"autoFocus":break;case"xlinkHref":if(M==null||typeof M=="function"||typeof M=="boolean"||typeof M=="symbol"){h.removeAttribute("xlink:href");break}_=dr(""+M),h.setAttributeNS("http://www.w3.org/1999/xlink","xlink:href",_);break;case"contentEditable":case"spellCheck":case"draggable":case"value":case"autoReverse":case"externalResourcesRequired":case"focusable":case"preserveAlpha":M!=null&&typeof M!="function"&&typeof M!="symbol"?h.setAttribute(_,""+M):h.removeAttribute(_);break;case"inert":case"allowFullScreen":case"async":case"autoPlay":case"controls":case"default":case"defer":case"disabled":case"disablePictureInPicture":case"disableRemotePlayback":case"formNoValidate":case"hidden":case"loop":case"noModule":case"noValidate":case"open":case"playsInline":case"readOnly":case"required":case"reversed":case"scoped":case"seamless":case"itemScope":M&&typeof M!="function"&&typeof M!="symbol"?h.setAttribute(_,""):h.removeAttribute(_);break;case"capture":case"download":M===!0?h.setAttribute(_,""):M!==!1&&M!=null&&typeof M!="function"&&typeof M!="symbol"?h.setAttribute(_,M):h.removeAttribute(_);break;case"cols":case"rows":case"size":case"span":M!=null&&typeof M!="function"&&typeof M!="symbol"&&!isNaN(M)&&1<=M?h.setAttribute(_,M):h.removeAttribute(_);break;case"rowSpan":case"start":M==null||typeof M=="function"||typeof M=="symbol"||isNaN(M)?h.removeAttribute(_):h.setAttribute(_,M);break;case"popover":wr("beforetoggle",h),wr("toggle",h),Ye(h,"popover",M);break;case"xlinkActuate":Yt(h,"http://www.w3.org/1999/xlink","xlink:actuate",M);break;case"xlinkArcrole":Yt(h,"http://www.w3.org/1999/xlink","xlink:arcrole",M);break;case"xlinkRole":Yt(h,"http://www.w3.org/1999/xlink","xlink:role",M);break;case"xlinkShow":Yt(h,"http://www.w3.org/1999/xlink","xlink:show",M);break;case"xlinkTitle":Yt(h,"http://www.w3.org/1999/xlink","xlink:title",M);break;case"xlinkType":Yt(h,"http://www.w3.org/1999/xlink","xlink:type",M);break;case"xmlBase":Yt(h,"http://www.w3.org/XML/1998/namespace","xml:base",M);break;case"xmlLang":Yt(h,"http://www.w3.org/XML/1998/namespace","xml:lang",M);break;case"xmlSpace":Yt(h,"http://www.w3.org/XML/1998/namespace","xml:space",M);break;case"is":Ye(h,"is",M);break;case"innerText":case"textContent":break;default:(!(2<_.length)||_[0]!=="o"&&_[0]!=="O"||_[1]!=="n"&&_[1]!=="N")&&(_=zt.get(_)||_,Ye(h,_,M))}}function BM(h,w,_,M,W,ee){switch(_){case"style":Pd(h,M,ee);break;case"dangerouslySetInnerHTML":if(M!=null){if(typeof M!="object"||!("__html"in M))throw Error(n(61));if(_=M.__html,_!=null){if(W.children!=null)throw Error(n(60));h.innerHTML=_}}break;case"children":typeof M=="string"?yi(h,M):(typeof M=="number"||typeof M=="bigint")&&yi(h,""+M);break;case"onScroll":M!=null&&wr("scroll",h);break;case"onScrollEnd":M!=null&&wr("scrollend",h);break;case"onClick":M!=null&&(h.onclick=Kt);break;case"suppressContentEditableWarning":case"suppressHydrationWarning":case"innerHTML":case"ref":break;case"innerText":case"textContent":break;default:if(!St.hasOwnProperty(_))e:{if(_[0]==="o"&&_[1]==="n"&&(W=_.endsWith("Capture"),w=_.slice(2,W?_.length-7:void 0),ee=h[Pt]||null,ee=ee!=null?ee[_]:null,typeof ee=="function"&&h.removeEventListener(w,ee,W),typeof M=="function")){typeof ee!="function"&&ee!==null&&(_ in h?h[_]=null:h.hasAttribute(_)&&h.removeAttribute(_)),h.addEventListener(w,M,W);break e}_ in h?h[_]=M:M===!0?h.setAttribute(_,""):Ye(h,_,M)}}}function _s(h,w,_){switch(w){case"div":case"span":case"svg":case"path":case"a":case"g":case"p":case"li":break;case"img":wr("error",h),wr("load",h);var M=!1,W=!1,ee;for(ee in _)if(_.hasOwnProperty(ee)){var Se=_[ee];if(Se!=null)switch(ee){case"src":M=!0;break;case"srcSet":W=!0;break;case"children":case"dangerouslySetInnerHTML":throw Error(n(137,w));default:tn(h,w,ee,Se,_,null)}}W&&tn(h,w,"srcSet",_.srcSet,_,null),M&&tn(h,w,"src",_.src,_,null);return;case"input":wr("invalid",h);var He=ee=Se=W=null,pt=null,Et=null;for(M in _)if(_.hasOwnProperty(M)){var qt=_[M];if(qt!=null)switch(M){case"name":W=qt;break;case"type":Se=qt;break;case"checked":pt=qt;break;case"defaultChecked":Et=qt;break;case"value":ee=qt;break;case"defaultValue":He=qt;break;case"children":case"dangerouslySetInnerHTML":if(qt!=null)throw Error(n(137,w));break;default:tn(h,w,M,qt,_,null)}}Ua(h,ee,He,pt,Et,Se,W,!1);return;case"select":wr("invalid",h),M=Se=ee=null;for(W in _)if(_.hasOwnProperty(W)&&(He=_[W],He!=null))switch(W){case"value":ee=He;break;case"defaultValue":Se=He;break;case"multiple":M=He;default:tn(h,w,W,He,_,null)}w=ee,_=Se,h.multiple=!!M,w!=null?Mr(h,!!M,w,!1):_!=null&&Mr(h,!!M,_,!0);return;case"textarea":wr("invalid",h),ee=W=M=null;for(Se in _)if(_.hasOwnProperty(Se)&&(He=_[Se],He!=null))switch(Se){case"value":M=He;break;case"defaultValue":W=He;break;case"children":ee=He;break;case"dangerouslySetInnerHTML":if(He!=null)throw Error(n(91));break;default:tn(h,w,Se,He,_,null)}yn(h,M,W,ee);return;case"option":for(pt in _)_.hasOwnProperty(pt)&&(M=_[pt],M!=null)&&(pt==="selected"?h.selected=M&&typeof M!="function"&&typeof M!="symbol":tn(h,w,pt,M,_,null));return;case"dialog":wr("beforetoggle",h),wr("toggle",h),wr("cancel",h),wr("close",h);break;case"iframe":case"object":wr("load",h);break;case"video":case"audio":for(M=0;M<Qv.length;M++)wr(Qv[M],h);break;case"image":wr("error",h),wr("load",h);break;case"details":wr("toggle",h);break;case"embed":case"source":case"link":wr("error",h),wr("load",h);case"area":case"base":case"br":case"col":case"hr":case"keygen":case"meta":case"param":case"track":case"wbr":case"menuitem":for(Et in _)if(_.hasOwnProperty(Et)&&(M=_[Et],M!=null))switch(Et){case"children":case"dangerouslySetInnerHTML":throw Error(n(137,w));default:tn(h,w,Et,M,_,null)}return;default:if(Fl(w)){for(qt in _)_.hasOwnProperty(qt)&&(M=_[qt],M!==void 0&&BM(h,w,qt,M,_,void 0));return}}for(He in _)_.hasOwnProperty(He)&&(M=_[He],M!=null&&tn(h,w,He,M,_,null))}function Mue(h,w,_,M){switch(w){case"div":case"span":case"svg":case"path":case"a":case"g":case"p":case"li":break;case"input":var W=null,ee=null,Se=null,He=null,pt=null,Et=null,qt=null;for(Bt in _){var Wt=_[Bt];if(_.hasOwnProperty(Bt)&&Wt!=null)switch(Bt){case"checked":break;case"value":break;case"defaultValue":pt=Wt;default:M.hasOwnProperty(Bt)||tn(h,w,Bt,null,M,Wt)}}for(var Lt in M){var Bt=M[Lt];if(Wt=_[Lt],M.hasOwnProperty(Lt)&&(Bt!=null||Wt!=null))switch(Lt){case"type":ee=Bt;break;case"name":W=Bt;break;case"checked":Et=Bt;break;case"defaultChecked":qt=Bt;break;case"value":Se=Bt;break;case"defaultValue":He=Bt;break;case"children":case"dangerouslySetInnerHTML":if(Bt!=null)throw Error(n(137,w));break;default:Bt!==Wt&&tn(h,w,Lt,Bt,M,Wt)}}Un(h,Se,He,pt,Et,qt,ee,W);return;case"select":Bt=Se=He=Lt=null;for(ee in _)if(pt=_[ee],_.hasOwnProperty(ee)&&pt!=null)switch(ee){case"value":break;case"multiple":Bt=pt;default:M.hasOwnProperty(ee)||tn(h,w,ee,null,M,pt)}for(W in M)if(ee=M[W],pt=_[W],M.hasOwnProperty(W)&&(ee!=null||pt!=null))switch(W){case"value":Lt=ee;break;case"defaultValue":He=ee;break;case"multiple":Se=ee;default:ee!==pt&&tn(h,w,W,ee,M,pt)}w=He,_=Se,M=Bt,Lt!=null?Mr(h,!!_,Lt,!1):!!M!=!!_&&(w!=null?Mr(h,!!_,w,!0):Mr(h,!!_,_?[]:"",!1));return;case"textarea":Bt=Lt=null;for(He in _)if(W=_[He],_.hasOwnProperty(He)&&W!=null&&!M.hasOwnProperty(He))switch(He){case"value":break;case"children":break;default:tn(h,w,He,null,M,W)}for(Se in M)if(W=M[Se],ee=_[Se],M.hasOwnProperty(Se)&&(W!=null||ee!=null))switch(Se){case"value":Lt=W;break;case"defaultValue":Bt=W;break;case"children":break;case"dangerouslySetInnerHTML":if(W!=null)throw Error(n(91));break;default:W!==ee&&tn(h,w,Se,W,M,ee)}cr(h,Lt,Bt);return;case"option":for(var wa in _)Lt=_[wa],_.hasOwnProperty(wa)&&Lt!=null&&!M.hasOwnProperty(wa)&&(wa==="selected"?h.selected=!1:tn(h,w,wa,null,M,Lt));for(pt in M)Lt=M[pt],Bt=_[pt],M.hasOwnProperty(pt)&&Lt!==Bt&&(Lt!=null||Bt!=null)&&(pt==="selected"?h.selected=Lt&&typeof Lt!="function"&&typeof Lt!="symbol":tn(h,w,pt,Lt,M,Bt));return;case"img":case"link":case"area":case"base":case"br":case"col":case"embed":case"hr":case"keygen":case"meta":case"param":case"source":case"track":case"wbr":case"menuitem":for(var za in _)Lt=_[za],_.hasOwnProperty(za)&&Lt!=null&&!M.hasOwnProperty(za)&&tn(h,w,za,null,M,Lt);for(Et in M)if(Lt=M[Et],Bt=_[Et],M.hasOwnProperty(Et)&&Lt!==Bt&&(Lt!=null||Bt!=null))switch(Et){case"children":case"dangerouslySetInnerHTML":if(Lt!=null)throw Error(n(137,w));break;default:tn(h,w,Et,Lt,M,Bt)}return;default:if(Fl(w)){for(var an in _)Lt=_[an],_.hasOwnProperty(an)&&Lt!==void 0&&!M.hasOwnProperty(an)&&BM(h,w,an,void 0,M,Lt);for(qt in M)Lt=M[qt],Bt=_[qt],!M.hasOwnProperty(qt)||Lt===Bt||Lt===void 0&&Bt===void 0||BM(h,w,qt,Lt,M,Bt);return}}for(var kt in _)Lt=_[kt],_.hasOwnProperty(kt)&&Lt!=null&&!M.hasOwnProperty(kt)&&tn(h,w,kt,null,M,Lt);for(Wt in M)Lt=M[Wt],Bt=_[Wt],!M.hasOwnProperty(Wt)||Lt===Bt||Lt==null&&Bt==null||tn(h,w,Wt,Lt,M,Bt)}function ZH(h){switch(h){case"css":case"script":case"font":case"img":case"image":case"input":case"link":return!0;default:return!1}}function Eue(){if(typeof performance.getEntriesByType=="function"){for(var h=0,w=0,_=performance.getEntriesByType("resource"),M=0;M<_.length;M++){var W=_[M],ee=W.transferSize,Se=W.initiatorType,He=W.duration;if(ee&&He&&ZH(Se)){for(Se=0,He=W.responseEnd,M+=1;M<_.length;M++){var pt=_[M],Et=pt.startTime;if(Et>He)break;var qt=pt.transferSize,Wt=pt.initiatorType;qt&&ZH(Wt)&&(pt=pt.responseEnd,Se+=qt*(pt<He?1:(He-Et)/(pt-Et)))}if(--M,w+=8*(ee+Se)/(W.duration/1e3),h++,10<h)break}}if(0<h)return w/h/1e6}return navigator.connection&&(h=navigator.connection.downlink,typeof h=="number")?h:5}var UM=null,HM=null;function b_(h){return h.nodeType===9?h:h.ownerDocument}function JH(h){switch(h){case"http://www.w3.org/2000/svg":return 1;case"http://www.w3.org/1998/Math/MathML":return 2;default:return 0}}function eq(h,w){if(h===0)switch(w){case"svg":return 1;case"math":return 2;default:return 0}return h===1&&w==="foreignObject"?0:h}function qM(h,w){return h==="textarea"||h==="noscript"||typeof w.children=="string"||typeof w.children=="number"||typeof w.children=="bigint"||typeof w.dangerouslySetInnerHTML=="object"&&w.dangerouslySetInnerHTML!==null&&w.dangerouslySetInnerHTML.__html!=null}var GM=null;function Due(){var h=window.event;return h&&h.type==="popstate"?h===GM?!1:(GM=h,!0):(GM=null,!1)}var tq=typeof setTimeout=="function"?setTimeout:void 0,Fue=typeof clearTimeout=="function"?clearTimeout:void 0,aq=typeof Promise=="function"?Promise:void 0,Lue=typeof queueMicrotask=="function"?queueMicrotask:typeof aq<"u"?function(h){return aq.resolve(null).then(h).catch(Rue)}:tq;function Rue(h){setTimeout(function(){throw h})}function Bp(h){return h==="head"}function rq(h,w){var _=w,M=0;do{var W=_.nextSibling;if(h.removeChild(_),W&&W.nodeType===8)if(_=W.data,_==="/$"||_==="/&"){if(M===0){h.removeChild(W),Jb(w);return}M--}else if(_==="$"||_==="$?"||_==="$~"||_==="$!"||_==="&")M++;else if(_==="html")Zv(h.ownerDocument.documentElement);else if(_==="head"){_=h.ownerDocument.head,Zv(_);for(var ee=_.firstChild;ee;){var Se=ee.nextSibling,He=ee.nodeName;ee[Te]||He==="SCRIPT"||He==="STYLE"||He==="LINK"&&ee.rel.toLowerCase()==="stylesheet"||_.removeChild(ee),ee=Se}}else _==="body"&&Zv(h.ownerDocument.body);_=W}while(_);Jb(w)}function nq(h,w){var _=h;h=0;do{var M=_.nextSibling;if(_.nodeType===1?w?(_._stashedDisplay=_.style.display,_.style.display="none"):(_.style.display=_._stashedDisplay||"",_.getAttribute("style")===""&&_.removeAttribute("style")):_.nodeType===3&&(w?(_._stashedText=_.nodeValue,_.nodeValue=""):_.nodeValue=_._stashedText||""),M&&M.nodeType===8)if(_=M.data,_==="/$"){if(h===0)break;h--}else _!=="$"&&_!=="$?"&&_!=="$~"&&_!=="$!"||h++;_=M}while(_)}function $M(h){var w=h.firstChild;for(w&&w.nodeType===10&&(w=w.nextSibling);w;){var _=w;switch(w=w.nextSibling,_.nodeName){case"HTML":case"HEAD":case"BODY":$M(_),_e(_);continue;case"SCRIPT":case"STYLE":continue;case"LINK":if(_.rel.toLowerCase()==="stylesheet")continue}h.removeChild(_)}}function zue(h,w,_,M){for(;h.nodeType===1;){var W=_;if(h.nodeName.toLowerCase()!==w.toLowerCase()){if(!M&&(h.nodeName!=="INPUT"||h.type!=="hidden"))break}else if(M){if(!h[Te])switch(w){case"meta":if(!h.hasAttribute("itemprop"))break;return h;case"link":if(ee=h.getAttribute("rel"),ee==="stylesheet"&&h.hasAttribute("data-precedence"))break;if(ee!==W.rel||h.getAttribute("href")!==(W.href==null||W.href===""?null:W.href)||h.getAttribute("crossorigin")!==(W.crossOrigin==null?null:W.crossOrigin)||h.getAttribute("title")!==(W.title==null?null:W.title))break;return h;case"style":if(h.hasAttribute("data-precedence"))break;return h;case"script":if(ee=h.getAttribute("src"),(ee!==(W.src==null?null:W.src)||h.getAttribute("type")!==(W.type==null?null:W.type)||h.getAttribute("crossorigin")!==(W.crossOrigin==null?null:W.crossOrigin))&&ee&&h.hasAttribute("async")&&!h.hasAttribute("itemprop"))break;return h;default:return h}}else if(w==="input"&&h.type==="hidden"){var ee=W.name==null?null:""+W.name;if(W.type==="hidden"&&h.getAttribute("name")===ee)return h}else return h;if(h=Ql(h.nextSibling),h===null)break}return null}function Iue(h,w,_){if(w==="")return null;for(;h.nodeType!==3;)if((h.nodeType!==1||h.nodeName!=="INPUT"||h.type!=="hidden")&&!_||(h=Ql(h.nextSibling),h===null))return null;return h}function iq(h,w){for(;h.nodeType!==8;)if((h.nodeType!==1||h.nodeName!=="INPUT"||h.type!=="hidden")&&!w||(h=Ql(h.nextSibling),h===null))return null;return h}function VM(h){return h.data==="$?"||h.data==="$~"}function WM(h){return h.data==="$!"||h.data==="$?"&&h.ownerDocument.readyState!=="loading"}function Oue(h,w){var _=h.ownerDocument;if(h.data==="$~")h._reactRetry=w;else if(h.data!=="$?"||_.readyState!=="loading")w();else{var M=function(){w(),_.removeEventListener("DOMContentLoaded",M)};_.addEventListener("DOMContentLoaded",M),h._reactRetry=M}}function Ql(h){for(;h!=null;h=h.nextSibling){var w=h.nodeType;if(w===1||w===3)break;if(w===8){if(w=h.data,w==="$"||w==="$!"||w==="$?"||w==="$~"||w==="&"||w==="F!"||w==="F")break;if(w==="/$"||w==="/&")return null}}return h}var KM=null;function sq(h){h=h.nextSibling;for(var w=0;h;){if(h.nodeType===8){var _=h.data;if(_==="/$"||_==="/&"){if(w===0)return Ql(h.nextSibling);w--}else _!=="$"&&_!=="$!"&&_!=="$?"&&_!=="$~"&&_!=="&"||w++}h=h.nextSibling}return null}function oq(h){h=h.previousSibling;for(var w=0;h;){if(h.nodeType===8){var _=h.data;if(_==="$"||_==="$!"||_==="$?"||_==="$~"||_==="&"){if(w===0)return h;w--}else _!=="/$"&&_!=="/&"||w++}h=h.previousSibling}return null}function lq(h,w,_){switch(w=b_(_),h){case"html":if(h=w.documentElement,!h)throw Error(n(452));return h;case"head":if(h=w.head,!h)throw Error(n(453));return h;case"body":if(h=w.body,!h)throw Error(n(454));return h;default:throw Error(n(451))}}function Zv(h){for(var w=h.attributes;w.length;)h.removeAttributeNode(w[0]);_e(h)}var Xl=new Map,cq=new Set;function x_(h){return typeof h.getRootNode=="function"?h.getRootNode():h.nodeType===9?h:h.ownerDocument}var Ju=J.d;J.d={f:Bue,r:Uue,D:Hue,C:que,L:Gue,m:$ue,X:Wue,S:Vue,M:Kue};function Bue(){var h=Ju.f(),w=c_();return h||w}function Uue(h){var w=we(h);w!==null&&w.tag===5&&w.type==="form"?CU(w):Ju.r(h)}var Qb=typeof document>"u"?null:document;function dq(h,w,_){var M=Qb;if(M&&typeof w=="string"&&w){var W=Oa(w);W='link[rel="'+h+'"][href="'+W+'"]',typeof _=="string"&&(W+='[crossorigin="'+_+'"]'),cq.has(W)||(cq.add(W),h={rel:h,crossOrigin:_,href:w},M.querySelector(W)===null&&(w=M.createElement("link"),_s(w,"link",h),nt(w),M.head.appendChild(w)))}}function Hue(h){Ju.D(h),dq("dns-prefetch",h,null)}function que(h,w){Ju.C(h,w),dq("preconnect",h,w)}function Gue(h,w,_){Ju.L(h,w,_);var M=Qb;if(M&&h&&w){var W='link[rel="preload"][as="'+Oa(w)+'"]';w==="image"&&_&&_.imageSrcSet?(W+='[imagesrcset="'+Oa(_.imageSrcSet)+'"]',typeof _.imageSizes=="string"&&(W+='[imagesizes="'+Oa(_.imageSizes)+'"]')):W+='[href="'+Oa(h)+'"]';var ee=W;switch(w){case"style":ee=Xb(h);break;case"script":ee=Zb(h)}Xl.has(ee)||(h=m({rel:"preload",href:w==="image"&&_&&_.imageSrcSet?void 0:h,as:w},_),Xl.set(ee,h),M.querySelector(W)!==null||w==="style"&&M.querySelector(Jv(ee))||w==="script"&&M.querySelector(e0(ee))||(w=M.createElement("link"),_s(w,"link",h),nt(w),M.head.appendChild(w)))}}function $ue(h,w){Ju.m(h,w);var _=Qb;if(_&&h){var M=w&&typeof w.as=="string"?w.as:"script",W='link[rel="modulepreload"][as="'+Oa(M)+'"][href="'+Oa(h)+'"]',ee=W;switch(M){case"audioworklet":case"paintworklet":case"serviceworker":case"sharedworker":case"worker":case"script":ee=Zb(h)}if(!Xl.has(ee)&&(h=m({rel:"modulepreload",href:h},w),Xl.set(ee,h),_.querySelector(W)===null)){switch(M){case"audioworklet":case"paintworklet":case"serviceworker":case"sharedworker":case"worker":case"script":if(_.querySelector(e0(ee)))return}M=_.createElement("link"),_s(M,"link",h),nt(M),_.head.appendChild(M)}}}function Vue(h,w,_){Ju.S(h,w,_);var M=Qb;if(M&&h){var W=tt(M).hoistableStyles,ee=Xb(h);w=w||"default";var Se=W.get(ee);if(!Se){var He={loading:0,preload:null};if(Se=M.querySelector(Jv(ee)))He.loading=5;else{h=m({rel:"stylesheet",href:h,"data-precedence":w},_),(_=Xl.get(ee))&&YM(h,_);var pt=Se=M.createElement("link");nt(pt),_s(pt,"link",h),pt._p=new Promise(function(Et,qt){pt.onload=Et,pt.onerror=qt}),pt.addEventListener("load",function(){He.loading|=1}),pt.addEventListener("error",function(){He.loading|=2}),He.loading|=4,y_(Se,w,M)}Se={type:"stylesheet",instance:Se,count:1,state:He},W.set(ee,Se)}}}function Wue(h,w){Ju.X(h,w);var _=Qb;if(_&&h){var M=tt(_).hoistableScripts,W=Zb(h),ee=M.get(W);ee||(ee=_.querySelector(e0(W)),ee||(h=m({src:h,async:!0},w),(w=Xl.get(W))&&QM(h,w),ee=_.createElement("script"),nt(ee),_s(ee,"link",h),_.head.appendChild(ee)),ee={type:"script",instance:ee,count:1,state:null},M.set(W,ee))}}function Kue(h,w){Ju.M(h,w);var _=Qb;if(_&&h){var M=tt(_).hoistableScripts,W=Zb(h),ee=M.get(W);ee||(ee=_.querySelector(e0(W)),ee||(h=m({src:h,async:!0,type:"module"},w),(w=Xl.get(W))&&QM(h,w),ee=_.createElement("script"),nt(ee),_s(ee,"link",h),_.head.appendChild(ee)),ee={type:"script",instance:ee,count:1,state:null},M.set(W,ee))}}function uq(h,w,_,M){var W=(W=G.current)?x_(W):null;if(!W)throw Error(n(446));switch(h){case"meta":case"title":return null;case"style":return typeof _.precedence=="string"&&typeof _.href=="string"?(w=Xb(_.href),_=tt(W).hoistableStyles,M=_.get(w),M||(M={type:"style",instance:null,count:0,state:null},_.set(w,M)),M):{type:"void",instance:null,count:0,state:null};case"link":if(_.rel==="stylesheet"&&typeof _.href=="string"&&typeof _.precedence=="string"){h=Xb(_.href);var ee=tt(W).hoistableStyles,Se=ee.get(h);if(Se||(W=W.ownerDocument||W,Se={type:"stylesheet",instance:null,count:0,state:{loading:0,preload:null}},ee.set(h,Se),(ee=W.querySelector(Jv(h)))&&!ee._p&&(Se.instance=ee,Se.state.loading=5),Xl.has(h)||(_={rel:"preload",as:"style",href:_.href,crossOrigin:_.crossOrigin,integrity:_.integrity,media:_.media,hrefLang:_.hrefLang,referrerPolicy:_.referrerPolicy},Xl.set(h,_),ee||Yue(W,h,_,Se.state))),w&&M===null)throw Error(n(528,""));return Se}if(w&&M!==null)throw Error(n(529,""));return null;case"script":return w=_.async,_=_.src,typeof _=="string"&&w&&typeof w!="function"&&typeof w!="symbol"?(w=Zb(_),_=tt(W).hoistableScripts,M=_.get(w),M||(M={type:"script",instance:null,count:0,state:null},_.set(w,M)),M):{type:"void",instance:null,count:0,state:null};default:throw Error(n(444,h))}}function Xb(h){return'href="'+Oa(h)+'"'}function Jv(h){return'link[rel="stylesheet"]['+h+"]"}function mq(h){return m({},h,{"data-precedence":h.precedence,precedence:null})}function Yue(h,w,_,M){h.querySelector('link[rel="preload"][as="style"]['+w+"]")?M.loading=1:(w=h.createElement("link"),M.preload=w,w.addEventListener("load",function(){return M.loading|=1}),w.addEventListener("error",function(){return M.loading|=2}),_s(w,"link",_),nt(w),h.head.appendChild(w))}function Zb(h){return'[src="'+Oa(h)+'"]'}function e0(h){return"script[async]"+h}function pq(h,w,_){if(w.count++,w.instance===null)switch(w.type){case"style":var M=h.querySelector('style[data-href~="'+Oa(_.href)+'"]');if(M)return w.instance=M,nt(M),M;var W=m({},_,{"data-href":_.href,"data-precedence":_.precedence,href:null,precedence:null});return M=(h.ownerDocument||h).createElement("style"),nt(M),_s(M,"style",W),y_(M,_.precedence,h),w.instance=M;case"stylesheet":W=Xb(_.href);var ee=h.querySelector(Jv(W));if(ee)return w.state.loading|=4,w.instance=ee,nt(ee),ee;M=mq(_),(W=Xl.get(W))&&YM(M,W),ee=(h.ownerDocument||h).createElement("link"),nt(ee);var Se=ee;return Se._p=new Promise(function(He,pt){Se.onload=He,Se.onerror=pt}),_s(ee,"link",M),w.state.loading|=4,y_(ee,_.precedence,h),w.instance=ee;case"script":return ee=Zb(_.src),(W=h.querySelector(e0(ee)))?(w.instance=W,nt(W),W):(M=_,(W=Xl.get(ee))&&(M=m({},_),QM(M,W)),h=h.ownerDocument||h,W=h.createElement("script"),nt(W),_s(W,"link",M),h.head.appendChild(W),w.instance=W);case"void":return null;default:throw Error(n(443,w.type))}else w.type==="stylesheet"&&(w.state.loading&4)===0&&(M=w.instance,w.state.loading|=4,y_(M,_.precedence,h));return w.instance}function y_(h,w,_){for(var M=_.querySelectorAll('link[rel="stylesheet"][data-precedence],style[data-precedence]'),W=M.length?M[M.length-1]:null,ee=W,Se=0;Se<M.length;Se++){var He=M[Se];if(He.dataset.precedence===w)ee=He;else if(ee!==W)break}ee?ee.parentNode.insertBefore(h,ee.nextSibling):(w=_.nodeType===9?_.head:_,w.insertBefore(h,w.firstChild))}function YM(h,w){h.crossOrigin==null&&(h.crossOrigin=w.crossOrigin),h.referrerPolicy==null&&(h.referrerPolicy=w.referrerPolicy),h.title==null&&(h.title=w.title)}function QM(h,w){h.crossOrigin==null&&(h.crossOrigin=w.crossOrigin),h.referrerPolicy==null&&(h.referrerPolicy=w.referrerPolicy),h.integrity==null&&(h.integrity=w.integrity)}var v_=null;function hq(h,w,_){if(v_===null){var M=new Map,W=v_=new Map;W.set(_,M)}else W=v_,M=W.get(_),M||(M=new Map,W.set(_,M));if(M.has(h))return M;for(M.set(h,null),_=_.getElementsByTagName(h),W=0;W<_.length;W++){var ee=_[W];if(!(ee[Te]||ee[vt]||h==="link"&&ee.getAttribute("rel")==="stylesheet")&&ee.namespaceURI!=="http://www.w3.org/2000/svg"){var Se=ee.getAttribute(w)||"";Se=h+Se;var He=M.get(Se);He?He.push(ee):M.set(Se,[ee])}}return M}function fq(h,w,_){h=h.ownerDocument||h,h.head.insertBefore(_,w==="title"?h.querySelector("head > title"):null)}function Que(h,w,_){if(_===1||w.itemProp!=null)return!1;switch(h){case"meta":case"title":return!0;case"style":if(typeof w.precedence!="string"||typeof w.href!="string"||w.href==="")break;return!0;case"link":if(typeof w.rel!="string"||typeof w.href!="string"||w.href===""||w.onLoad||w.onError)break;return w.rel==="stylesheet"?(h=w.disabled,typeof w.precedence=="string"&&h==null):!0;case"script":if(w.async&&typeof w.async!="function"&&typeof w.async!="symbol"&&!w.onLoad&&!w.onError&&w.src&&typeof w.src=="string")return!0}return!1}function gq(h){return!(h.type==="stylesheet"&&(h.state.loading&3)===0)}function Xue(h,w,_,M){if(_.type==="stylesheet"&&(typeof M.media!="string"||matchMedia(M.media).matches!==!1)&&(_.state.loading&4)===0){if(_.instance===null){var W=Xb(M.href),ee=w.querySelector(Jv(W));if(ee){w=ee._p,w!==null&&typeof w=="object"&&typeof w.then=="function"&&(h.count++,h=w_.bind(h),w.then(h,h)),_.state.loading|=4,_.instance=ee,nt(ee);return}ee=w.ownerDocument||w,M=mq(M),(W=Xl.get(W))&&YM(M,W),ee=ee.createElement("link"),nt(ee);var Se=ee;Se._p=new Promise(function(He,pt){Se.onload=He,Se.onerror=pt}),_s(ee,"link",M),_.instance=ee}h.stylesheets===null&&(h.stylesheets=new Map),h.stylesheets.set(_,w),(w=_.state.preload)&&(_.state.loading&3)===0&&(h.count++,_=w_.bind(h),w.addEventListener("load",_),w.addEventListener("error",_))}}var XM=0;function Zue(h,w){return h.stylesheets&&h.count===0&&k_(h,h.stylesheets),0<h.count||0<h.imgCount?function(_){var M=setTimeout(function(){if(h.stylesheets&&k_(h,h.stylesheets),h.unsuspend){var ee=h.unsuspend;h.unsuspend=null,ee()}},6e4+w);0<h.imgBytes&&XM===0&&(XM=62500*Eue());var W=setTimeout(function(){if(h.waitingForImages=!1,h.count===0&&(h.stylesheets&&k_(h,h.stylesheets),h.unsuspend)){var ee=h.unsuspend;h.unsuspend=null,ee()}},(h.imgBytes>XM?50:800)+w);return h.unsuspend=_,function(){h.unsuspend=null,clearTimeout(M),clearTimeout(W)}}:null}function w_(){if(this.count--,this.count===0&&(this.imgCount===0||!this.waitingForImages)){if(this.stylesheets)k_(this,this.stylesheets);else if(this.unsuspend){var h=this.unsuspend;this.unsuspend=null,h()}}}var S_=null;function k_(h,w){h.stylesheets=null,h.unsuspend!==null&&(h.count++,S_=new Map,w.forEach(Jue,h),S_=null,w_.call(h))}function Jue(h,w){if(!(w.state.loading&4)){var _=S_.get(h);if(_)var M=_.get(null);else{_=new Map,S_.set(h,_);for(var W=h.querySelectorAll("link[data-precedence],style[data-precedence]"),ee=0;ee<W.length;ee++){var Se=W[ee];(Se.nodeName==="LINK"||Se.getAttribute("media")!=="not all")&&(_.set(Se.dataset.precedence,Se),M=Se)}M&&_.set(null,M)}W=w.instance,Se=W.getAttribute("data-precedence"),ee=_.get(Se)||M,ee===M&&_.set(null,W),_.set(Se,W),this.count++,M=w_.bind(this),W.addEventListener("load",M),W.addEventListener("error",M),ee?ee.parentNode.insertBefore(W,ee.nextSibling):(h=h.nodeType===9?h.head:h,h.insertBefore(W,h.firstChild)),w.state.loading|=4}}var t0={$$typeof:k,Provider:null,Consumer:null,_currentValue:de,_currentValue2:de,_threadCount:0};function eme(h,w,_,M,W,ee,Se,He,pt){this.tag=1,this.containerInfo=h,this.pingCache=this.current=this.pendingChildren=null,this.timeoutHandle=-1,this.callbackNode=this.next=this.pendingContext=this.context=this.cancelPendingCommit=null,this.callbackPriority=0,this.expirationTimes=Ae(-1),this.entangledLanes=this.shellSuspendCounter=this.errorRecoveryDisabledLanes=this.expiredLanes=this.warmLanes=this.pingedLanes=this.suspendedLanes=this.pendingLanes=0,this.entanglements=Ae(0),this.hiddenUpdates=Ae(null),this.identifierPrefix=M,this.onUncaughtError=W,this.onCaughtError=ee,this.onRecoverableError=Se,this.pooledCache=null,this.pooledCacheLanes=0,this.formState=pt,this.incompleteTransitions=new Map}function bq(h,w,_,M,W,ee,Se,He,pt,Et,qt,Wt){return h=new eme(h,w,_,Se,pt,Et,qt,Wt,He),w=1,ee===!0&&(w|=24),ee=sl(3,null,null,w),h.current=ee,ee.stateNode=h,w=jj(),w.refCount++,h.pooledCache=w,w.refCount++,ee.memoizedState={element:M,isDehydrated:_,cache:w},Fj(ee),h}function xq(h){return h?(h=Ab,h):Ab}function yq(h,w,_,M,W,ee){W=xq(W),M.context===null?M.context=W:M.pendingContext=W,M=Ap(w),M.payload={element:_},ee=ee===void 0?null:ee,ee!==null&&(M.callback=ee),_=jp(h,M,w),_!==null&&(Io(_,h,w),Dv(_,h,w))}function vq(h,w){if(h=h.memoizedState,h!==null&&h.dehydrated!==null){var _=h.retryLane;h.retryLane=_!==0&&_<w?_:w}}function ZM(h,w){vq(h,w),(h=h.alternate)&&vq(h,w)}function wq(h){if(h.tag===13||h.tag===31){var w=_f(h,67108864);w!==null&&Io(w,h,67108864),ZM(h,67108864)}}function Sq(h){if(h.tag===13||h.tag===31){var w=ul();w=Vt(w);var _=_f(h,w);_!==null&&Io(_,h,w),ZM(h,w)}}var __=!0;function tme(h,w,_,M){var W=te.T;te.T=null;var ee=J.p;try{J.p=2,JM(h,w,_,M)}finally{J.p=ee,te.T=W}}function ame(h,w,_,M){var W=te.T;te.T=null;var ee=J.p;try{J.p=8,JM(h,w,_,M)}finally{J.p=ee,te.T=W}}function JM(h,w,_,M){if(__){var W=eE(M);if(W===null)OM(h,w,M,P_,_),_q(h,M);else if(nme(W,h,w,_,M))M.stopPropagation();else if(_q(h,M),w&4&&-1<rme.indexOf(h)){for(;W!==null;){var ee=we(W);if(ee!==null)switch(ee.tag){case 3:if(ee=ee.stateNode,ee.current.memoizedState.isDehydrated){var Se=$e(ee.pendingLanes);if(Se!==0){var He=ee;for(He.pendingLanes|=2,He.entangledLanes|=2;Se;){var pt=1<<31-qe(Se);He.entanglements[1]|=pt,Se&=~pt}Rd(ee),(Br&6)===0&&(o_=z()+500,Yv(0))}}break;case 31:case 13:He=_f(ee,2),He!==null&&Io(He,ee,2),c_(),ZM(ee,2)}if(ee=eE(M),ee===null&&OM(h,w,M,P_,_),ee===W)break;W=ee}W!==null&&M.stopPropagation()}else OM(h,w,M,null,_)}}function eE(h){return h=mn(h),tE(h)}var P_=null;function tE(h){if(P_=null,h=lt(h),h!==null){var w=s(h);if(w===null)h=null;else{var _=w.tag;if(_===13){if(h=o(w),h!==null)return h;h=null}else if(_===31){if(h=l(w),h!==null)return h;h=null}else if(_===3){if(w.stateNode.current.memoizedState.isDehydrated)return w.tag===3?w.stateNode.containerInfo:null;h=null}else w!==h&&(h=null)}}return P_=h,null}function kq(h){switch(h){case"beforetoggle":case"cancel":case"click":case"close":case"contextmenu":case"copy":case"cut":case"auxclick":case"dblclick":case"dragend":case"dragstart":case"drop":case"focusin":case"focusout":case"input":case"invalid":case"keydown":case"keypress":case"keyup":case"mousedown":case"mouseup":case"paste":case"pause":case"play":case"pointercancel":case"pointerdown":case"pointerup":case"ratechange":case"reset":case"resize":case"seeked":case"submit":case"toggle":case"touchcancel":case"touchend":case"touchstart":case"volumechange":case"change":case"selectionchange":case"textInput":case"compositionstart":case"compositionend":case"compositionupdate":case"beforeblur":case"afterblur":case"beforeinput":case"blur":case"fullscreenchange":case"focus":case"hashchange":case"popstate":case"select":case"selectstart":return 2;case"drag":case"dragenter":case"dragexit":case"dragleave":case"dragover":case"mousemove":case"mouseout":case"mouseover":case"pointermove":case"pointerout":case"pointerover":case"scroll":case"touchmove":case"wheel":case"mouseenter":case"mouseleave":case"pointerenter":case"pointerleave":return 8;case"message":switch(ae()){case ge:return 2;case be:return 8;case ve:case Me:return 32;case Ee:return 268435456;default:return 32}default:return 32}}var aE=!1,Up=null,Hp=null,qp=null,a0=new Map,r0=new Map,Gp=[],rme="mousedown mouseup touchcancel touchend touchstart auxclick dblclick pointercancel pointerdown pointerup dragend dragstart drop compositionend compositionstart keydown keypress keyup input textInput copy cut paste click change contextmenu reset".split(" ");function _q(h,w){switch(h){case"focusin":case"focusout":Up=null;break;case"dragenter":case"dragleave":Hp=null;break;case"mouseover":case"mouseout":qp=null;break;case"pointerover":case"pointerout":a0.delete(w.pointerId);break;case"gotpointercapture":case"lostpointercapture":r0.delete(w.pointerId)}}function n0(h,w,_,M,W,ee){return h===null||h.nativeEvent!==ee?(h={blockedOn:w,domEventName:_,eventSystemFlags:M,nativeEvent:ee,targetContainers:[W]},w!==null&&(w=we(w),w!==null&&wq(w)),h):(h.eventSystemFlags|=M,w=h.targetContainers,W!==null&&w.indexOf(W)===-1&&w.push(W),h)}function nme(h,w,_,M,W){switch(w){case"focusin":return Up=n0(Up,h,w,_,M,W),!0;case"dragenter":return Hp=n0(Hp,h,w,_,M,W),!0;case"mouseover":return qp=n0(qp,h,w,_,M,W),!0;case"pointerover":var ee=W.pointerId;return a0.set(ee,n0(a0.get(ee)||null,h,w,_,M,W)),!0;case"gotpointercapture":return ee=W.pointerId,r0.set(ee,n0(r0.get(ee)||null,h,w,_,M,W)),!0}return!1}function Pq(h){var w=lt(h.target);if(w!==null){var _=s(w);if(_!==null){if(w=_.tag,w===13){if(w=o(_),w!==null){h.blockedOn=w,fa(h.priority,function(){Sq(_)});return}}else if(w===31){if(w=l(_),w!==null){h.blockedOn=w,fa(h.priority,function(){Sq(_)});return}}else if(w===3&&_.stateNode.current.memoizedState.isDehydrated){h.blockedOn=_.tag===3?_.stateNode.containerInfo:null;return}}}h.blockedOn=null}function C_(h){if(h.blockedOn!==null)return!1;for(var w=h.targetContainers;0<w.length;){var _=eE(h.nativeEvent);if(_===null){_=h.nativeEvent;var M=new _.constructor(_.type,_);Ll=M,_.target.dispatchEvent(M),Ll=null}else return w=we(_),w!==null&&wq(w),h.blockedOn=_,!1;w.shift()}return!0}function Cq(h,w,_){C_(h)&&_.delete(w)}function ime(){aE=!1,Up!==null&&C_(Up)&&(Up=null),Hp!==null&&C_(Hp)&&(Hp=null),qp!==null&&C_(qp)&&(qp=null),a0.forEach(Cq),r0.forEach(Cq)}function N_(h,w){h.blockedOn===w&&(h.blockedOn=null,aE||(aE=!0,t.unstable_scheduleCallback(t.unstable_NormalPriority,ime)))}var T_=null;function Nq(h){T_!==h&&(T_=h,t.unstable_scheduleCallback(t.unstable_NormalPriority,function(){T_===h&&(T_=null);for(var w=0;w<h.length;w+=3){var _=h[w],M=h[w+1],W=h[w+2];if(typeof M!="function"){if(tE(M||_)===null)continue;break}var ee=we(_);ee!==null&&(h.splice(w,3),w-=3,eM(ee,{pending:!0,data:W,method:_.method,action:M},M,W))}}))}function Jb(h){function w(pt){return N_(pt,h)}Up!==null&&N_(Up,h),Hp!==null&&N_(Hp,h),qp!==null&&N_(qp,h),a0.forEach(w),r0.forEach(w);for(var _=0;_<Gp.length;_++){var M=Gp[_];M.blockedOn===h&&(M.blockedOn=null)}for(;0<Gp.length&&(_=Gp[0],_.blockedOn===null);)Pq(_),_.blockedOn===null&&Gp.shift();if(_=(h.ownerDocument||h).$$reactFormReplay,_!=null)for(M=0;M<_.length;M+=3){var W=_[M],ee=_[M+1],Se=W[Pt]||null;if(typeof ee=="function")Se||Nq(_);else if(Se){var He=null;if(ee&&ee.hasAttribute("formAction")){if(W=ee,Se=ee[Pt]||null)He=Se.formAction;else if(tE(W)!==null)continue}else He=Se.action;typeof He=="function"?_[M+1]=He:(_.splice(M,3),M-=3),Nq(_)}}}function Tq(){function h(ee){ee.canIntercept&&ee.info==="react-transition"&&ee.intercept({handler:function(){return new Promise(function(Se){return W=Se})},focusReset:"manual",scroll:"manual"})}function w(){W!==null&&(W(),W=null),M||setTimeout(_,20)}function _(){if(!M&&!navigation.transition){var ee=navigation.currentEntry;ee&&ee.url!=null&&navigation.navigate(ee.url,{state:ee.getState(),info:"react-transition",history:"replace"})}}if(typeof navigation=="object"){var M=!1,W=null;return navigation.addEventListener("navigate",h),navigation.addEventListener("navigatesuccess",w),navigation.addEventListener("navigateerror",w),setTimeout(_,100),function(){M=!0,navigation.removeEventListener("navigate",h),navigation.removeEventListener("navigatesuccess",w),navigation.removeEventListener("navigateerror",w),W!==null&&(W(),W=null)}}}function rE(h){this._internalRoot=h}A_.prototype.render=rE.prototype.render=function(h){var w=this._internalRoot;if(w===null)throw Error(n(409));var _=w.current,M=ul();yq(_,M,h,w,null,null)},A_.prototype.unmount=rE.prototype.unmount=function(){var h=this._internalRoot;if(h!==null){this._internalRoot=null;var w=h.containerInfo;yq(h.current,2,null,h,null,null),c_(),w[Tt]=null}};function A_(h){this._internalRoot=h}A_.prototype.unstable_scheduleHydration=function(h){if(h){var w=oa();h={blockedOn:null,target:h,priority:w};for(var _=0;_<Gp.length&&w!==0&&w<Gp[_].priority;_++);Gp.splice(_,0,h),_===0&&Pq(h)}};var Aq=e.version;if(Aq!=="19.2.4")throw Error(n(527,Aq,"19.2.4"));J.findDOMNode=function(h){var w=h._reactInternals;if(w===void 0)throw typeof h.render=="function"?Error(n(188)):(h=Object.keys(h).join(","),Error(n(268,h)));return h=d(w),h=h!==null?u(h):null,h=h===null?null:h.stateNode,h};var sme={bundleType:0,version:"19.2.4",rendererPackageName:"react-dom",currentDispatcherRef:te,reconcilerVersion:"19.2.4"};if(typeof __REACT_DEVTOOLS_GLOBAL_HOOK__<"u"){var j_=__REACT_DEVTOOLS_GLOBAL_HOOK__;if(!j_.isDisabled&&j_.supportsFiber)try{Ce=j_.inject(sme),Ie=j_}catch{}}return s0.createRoot=function(h,w){if(!i(h))throw Error(n(299));var _=!1,M="",W=RU,ee=zU,Se=IU;return w!=null&&(w.unstable_strictMode===!0&&(_=!0),w.identifierPrefix!==void 0&&(M=w.identifierPrefix),w.onUncaughtError!==void 0&&(W=w.onUncaughtError),w.onCaughtError!==void 0&&(ee=w.onCaughtError),w.onRecoverableError!==void 0&&(Se=w.onRecoverableError)),w=bq(h,1,!1,null,null,_,M,null,W,ee,Se,Tq),h[Tt]=w.current,IM(h),new rE(w)},s0.hydrateRoot=function(h,w,_){if(!i(h))throw Error(n(299));var M=!1,W="",ee=RU,Se=zU,He=IU,pt=null;return _!=null&&(_.unstable_strictMode===!0&&(M=!0),_.identifierPrefix!==void 0&&(W=_.identifierPrefix),_.onUncaughtError!==void 0&&(ee=_.onUncaughtError),_.onCaughtError!==void 0&&(Se=_.onCaughtError),_.onRecoverableError!==void 0&&(He=_.onRecoverableError),_.formState!==void 0&&(pt=_.formState)),w=bq(h,1,!0,w,_??null,M,W,pt,ee,Se,He,Tq),w.context=xq(null),_=w.current,M=ul(),M=Vt(M),W=Ap(M),W.callback=null,jp(_,W,M),_=M,w.current.lanes=_,rt(w,_),Rd(w),h[Tt]=w.current,IM(h),new A_(w)},s0.version="19.2.4",s0}var Oq;function bme(){if(Oq)return sE.exports;Oq=1;function t(){if(!(typeof __REACT_DEVTOOLS_GLOBAL_HOOK__>"u"||typeof __REACT_DEVTOOLS_GLOBAL_HOOK__.checkDCE!="function"))try{__REACT_DEVTOOLS_GLOBAL_HOOK__.checkDCE(t)}catch(e){console.error(e)}}return t(),sE.exports=gme(),sE.exports}var xme=bme();const qa=t=>typeof t=="string",o0=()=>{let t,e;const a=new Promise((n,i)=>{t=n,e=i});return a.resolve=t,a.reject=e,a},Bq=t=>t==null?"":""+t,yme=(t,e,a)=>{t.forEach(n=>{e[n]&&(a[n]=e[n])})},vme=/###/g,Uq=t=>t&&t.indexOf("###")>-1?t.replace(vme,"."):t,Hq=t=>!t||qa(t),nw=(t,e,a)=>{const n=qa(e)?e.split("."):e;let i=0;for(;i<n.length-1;){if(Hq(t))return{};const s=Uq(n[i]);!t[s]&&a&&(t[s]=new a),Object.prototype.hasOwnProperty.call(t,s)?t=t[s]:t={},++i}return Hq(t)?{}:{obj:t,k:Uq(n[i])}},qq=(t,e,a)=>{const{obj:n,k:i}=nw(t,e,Object);if(n!==void 0||e.length===1){n[i]=a;return}let s=e[e.length-1],o=e.slice(0,e.length-1),l=nw(t,o,Object);for(;l.obj===void 0&&o.length;)s=`${o[o.length-1]}.${s}`,o=o.slice(0,o.length-1),l=nw(t,o,Object),l?.obj&&typeof l.obj[`${l.k}.${s}`]<"u"&&(l.obj=void 0);l.obj[`${l.k}.${s}`]=a},wme=(t,e,a,n)=>{const{obj:i,k:s}=nw(t,e,Object);i[s]=i[s]||[],i[s].push(a)},tN=(t,e)=>{const{obj:a,k:n}=nw(t,e);if(a&&Object.prototype.hasOwnProperty.call(a,n))return a[n]},Sme=(t,e,a)=>{const n=tN(t,a);return n!==void 0?n:tN(e,a)},nZ=(t,e,a)=>{for(const n in e)n!=="__proto__"&&n!=="constructor"&&(n in t?qa(t[n])||t[n]instanceof String||qa(e[n])||e[n]instanceof String?a&&(t[n]=e[n]):nZ(t[n],e[n],a):t[n]=e[n]);return t},ex=t=>t.replace(/[\-\[\]\/\{\}\(\)\*\+\?\.\\\^\$\|]/g,"\\$&");var kme={"&":"&amp;","<":"&lt;",">":"&gt;",'"':"&quot;","'":"&#39;","/":"&#x2F;"};const _me=t=>qa(t)?t.replace(/[&<>"'\/]/g,e=>kme[e]):t;class Pme{constructor(e){this.capacity=e,this.regExpMap=new Map,this.regExpQueue=[]}getRegExp(e){const a=this.regExpMap.get(e);if(a!==void 0)return a;const n=new RegExp(e);return this.regExpQueue.length===this.capacity&&this.regExpMap.delete(this.regExpQueue.shift()),this.regExpMap.set(e,n),this.regExpQueue.push(e),n}}const Cme=[" ",",","?","!",";"],Nme=new Pme(20),Tme=(t,e,a)=>{e=e||"",a=a||"";const n=Cme.filter(o=>e.indexOf(o)<0&&a.indexOf(o)<0);if(n.length===0)return!0;const i=Nme.getRegExp(`(${n.map(o=>o==="?"?"\\?":o).join("|")})`);let s=!i.test(t);if(!s){const o=t.indexOf(a);o>0&&!i.test(t.substring(0,o))&&(s=!0)}return s},UL=(t,e,a=".")=>{if(!t)return;if(t[e])return Object.prototype.hasOwnProperty.call(t,e)?t[e]:void 0;const n=e.split(a);let i=t;for(let s=0;s<n.length;){if(!i||typeof i!="object")return;let o,l="";for(let c=s;c<n.length;++c)if(c!==s&&(l+=a),l+=n[c],o=i[l],o!==void 0){if(["string","number","boolean"].indexOf(typeof o)>-1&&c<n.length-1)continue;s+=c-s+1;break}i=o}return i},Lw=t=>t?.replace("_","-"),Ame={type:"logger",log(t){this.output("log",t)},warn(t){this.output("warn",t)},error(t){this.output("error",t)},output(t,e){console?.[t]?.apply?.(console,e)}};class aN{constructor(e,a={}){this.init(e,a)}init(e,a={}){this.prefix=a.prefix||"i18next:",this.logger=e||Ame,this.options=a,this.debug=a.debug}log(...e){return this.forward(e,"log","",!0)}warn(...e){return this.forward(e,"warn","",!0)}error(...e){return this.forward(e,"error","")}deprecate(...e){return this.forward(e,"warn","WARNING DEPRECATED: ",!0)}forward(e,a,n,i){return i&&!this.debug?null:(qa(e[0])&&(e[0]=`${n}${this.prefix} ${e[0]}`),this.logger[a](e))}create(e){return new aN(this.logger,{prefix:`${this.prefix}:${e}:`,...this.options})}clone(e){return e=e||this.options,e.prefix=e.prefix||this.prefix,new aN(this.logger,e)}}var tu=new aN;let CT=class{constructor(){this.observers={}}on(e,a){return e.split(" ").forEach(n=>{this.observers[n]||(this.observers[n]=new Map);const i=this.observers[n].get(a)||0;this.observers[n].set(a,i+1)}),this}off(e,a){if(this.observers[e]){if(!a){delete this.observers[e];return}this.observers[e].delete(a)}}emit(e,...a){this.observers[e]&&Array.from(this.observers[e].entries()).forEach(([i,s])=>{for(let o=0;o<s;o++)i(...a)}),this.observers["*"]&&Array.from(this.observers["*"].entries()).forEach(([i,s])=>{for(let o=0;o<s;o++)i.apply(i,[e,...a])})}};class Gq extends CT{constructor(e,a={ns:["translation"],defaultNS:"translation"}){super(),this.data=e||{},this.options=a,this.options.keySeparator===void 0&&(this.options.keySeparator="."),this.options.ignoreJSONStructure===void 0&&(this.options.ignoreJSONStructure=!0)}addNamespaces(e){this.options.ns.indexOf(e)<0&&this.options.ns.push(e)}removeNamespaces(e){const a=this.options.ns.indexOf(e);a>-1&&this.options.ns.splice(a,1)}getResource(e,a,n,i={}){const s=i.keySeparator!==void 0?i.keySeparator:this.options.keySeparator,o=i.ignoreJSONStructure!==void 0?i.ignoreJSONStructure:this.options.ignoreJSONStructure;let l;e.indexOf(".")>-1?l=e.split("."):(l=[e,a],n&&(Array.isArray(n)?l.push(...n):qa(n)&&s?l.push(...n.split(s)):l.push(n)));const c=tN(this.data,l);return!c&&!a&&!n&&e.indexOf(".")>-1&&(e=l[0],a=l[1],n=l.slice(2).join(".")),c||!o||!qa(n)?c:UL(this.data?.[e]?.[a],n,s)}addResource(e,a,n,i,s={silent:!1}){const o=s.keySeparator!==void 0?s.keySeparator:this.options.keySeparator;let l=[e,a];n&&(l=l.concat(o?n.split(o):n)),e.indexOf(".")>-1&&(l=e.split("."),i=a,a=l[1]),this.addNamespaces(a),qq(this.data,l,i),s.silent||this.emit("added",e,a,n,i)}addResources(e,a,n,i={silent:!1}){for(const s in n)(qa(n[s])||Array.isArray(n[s]))&&this.addResource(e,a,s,n[s],{silent:!0});i.silent||this.emit("added",e,a,n)}addResourceBundle(e,a,n,i,s,o={silent:!1,skipCopy:!1}){let l=[e,a];e.indexOf(".")>-1&&(l=e.split("."),i=n,n=a,a=l[1]),this.addNamespaces(a);let c=tN(this.data,l)||{};o.skipCopy||(n=JSON.parse(JSON.stringify(n))),i?nZ(c,n,s):c={...c,...n},qq(this.data,l,c),o.silent||this.emit("added",e,a,n)}removeResourceBundle(e,a){this.hasResourceBundle(e,a)&&delete this.data[e][a],this.removeNamespaces(a),this.emit("removed",e,a)}hasResourceBundle(e,a){return this.getResource(e,a)!==void 0}getResourceBundle(e,a){return a||(a=this.options.defaultNS),this.getResource(e,a)}getDataByLanguage(e){return this.data[e]}hasLanguageSomeTranslations(e){const a=this.getDataByLanguage(e);return!!(a&&Object.keys(a)||[]).find(i=>a[i]&&Object.keys(a[i]).length>0)}toJSON(){return this.data}}var iZ={processors:{},addPostProcessor(t){this.processors[t.name]=t},handle(t,e,a,n,i){return t.forEach(s=>{e=this.processors[s]?.process(e,a,n,i)??e}),e}};const sZ=Symbol("i18next/PATH_KEY");function jme(){const t=[],e=Object.create(null);let a;return e.get=(n,i)=>(a?.revoke?.(),i===sZ?t:(t.push(i),a=Proxy.revocable(n,e),a.proxy)),Proxy.revocable(Object.create(null),e).proxy}function HL(t,e){const{[sZ]:a}=t(jme());return a.join(e?.keySeparator??".")}const $q={},dE=t=>!qa(t)&&typeof t!="boolean"&&typeof t!="number";class rN extends CT{constructor(e,a={}){super(),yme(["resourceStore","languageUtils","pluralResolver","interpolator","backendConnector","i18nFormat","utils"],e,this),this.options=a,this.options.keySeparator===void 0&&(this.options.keySeparator="."),this.logger=tu.create("translator")}changeLanguage(e){e&&(this.language=e)}exists(e,a={interpolation:{}}){const n={...a};if(e==null)return!1;const i=this.resolve(e,n);if(i?.res===void 0)return!1;const s=dE(i.res);return!(n.returnObjects===!1&&s)}extractFromKey(e,a){let n=a.nsSeparator!==void 0?a.nsSeparator:this.options.nsSeparator;n===void 0&&(n=":");const i=a.keySeparator!==void 0?a.keySeparator:this.options.keySeparator;let s=a.ns||this.options.defaultNS||[];const o=n&&e.indexOf(n)>-1,l=!this.options.userDefinedKeySeparator&&!a.keySeparator&&!this.options.userDefinedNsSeparator&&!a.nsSeparator&&!Tme(e,n,i);if(o&&!l){const c=e.match(this.interpolator.nestingRegexp);if(c&&c.length>0)return{key:e,namespaces:qa(s)?[s]:s};const d=e.split(n);(n!==i||n===i&&this.options.ns.indexOf(d[0])>-1)&&(s=d.shift()),e=d.join(i)}return{key:e,namespaces:qa(s)?[s]:s}}translate(e,a,n){let i=typeof a=="object"?{...a}:a;if(typeof i!="object"&&this.options.overloadTranslationOptionHandler&&(i=this.options.overloadTranslationOptionHandler(arguments)),typeof i=="object"&&(i={...i}),i||(i={}),e==null)return"";typeof e=="function"&&(e=HL(e,{...this.options,...i})),Array.isArray(e)||(e=[String(e)]);const s=i.returnDetails!==void 0?i.returnDetails:this.options.returnDetails,o=i.keySeparator!==void 0?i.keySeparator:this.options.keySeparator,{key:l,namespaces:c}=this.extractFromKey(e[e.length-1],i),d=c[c.length-1];let u=i.nsSeparator!==void 0?i.nsSeparator:this.options.nsSeparator;u===void 0&&(u=":");const m=i.lng||this.language,p=i.appendNamespaceToCIMode||this.options.appendNamespaceToCIMode;if(m?.toLowerCase()==="cimode")return p?s?{res:`${d}${u}${l}`,usedKey:l,exactUsedKey:l,usedLng:m,usedNS:d,usedParams:this.getUsedParamsDetails(i)}:`${d}${u}${l}`:s?{res:l,usedKey:l,exactUsedKey:l,usedLng:m,usedNS:d,usedParams:this.getUsedParamsDetails(i)}:l;const f=this.resolve(e,i);let g=f?.res;const v=f?.usedKey||l,b=f?.exactUsedKey||l,x=["[object Number]","[object Function]","[object RegExp]"],S=i.joinArrays!==void 0?i.joinArrays:this.options.joinArrays,k=!this.i18nFormat||this.i18nFormat.handleAsObject,C=i.count!==void 0&&!qa(i.count),N=rN.hasDefaultValue(i),T=C?this.pluralResolver.getSuffix(m,i.count,i):"",j=i.ordinal&&C?this.pluralResolver.getSuffix(m,i.count,{ordinal:!1}):"",D=C&&!i.ordinal&&i.count===0,P=D&&i[`defaultValue${this.options.pluralSeparator}zero`]||i[`defaultValue${T}`]||i[`defaultValue${j}`]||i.defaultValue;let E=g;k&&!g&&N&&(E=P);const R=dE(E),O=Object.prototype.toString.apply(E);if(k&&E&&R&&x.indexOf(O)<0&&!(qa(S)&&Array.isArray(E))){if(!i.returnObjects&&!this.options.returnObjects){this.options.returnedObjectHandler||this.logger.warn("accessing an object - but returnObjects options is not enabled!");const I=this.options.returnedObjectHandler?this.options.returnedObjectHandler(v,E,{...i,ns:c}):`key '${l} (${this.language})' returned an object instead of string.`;return s?(f.res=I,f.usedParams=this.getUsedParamsDetails(i),f):I}if(o){const I=Array.isArray(E),L=I?[]:{},Y=I?b:v;for(const te in E)if(Object.prototype.hasOwnProperty.call(E,te)){const J=`${Y}${o}${te}`;N&&!g?L[te]=this.translate(J,{...i,defaultValue:dE(P)?P[te]:void 0,joinArrays:!1,ns:c}):L[te]=this.translate(J,{...i,joinArrays:!1,ns:c}),L[te]===J&&(L[te]=E[te])}g=L}}else if(k&&qa(S)&&Array.isArray(g))g=g.join(S),g&&(g=this.extendTranslation(g,e,i,n));else{let I=!1,L=!1;!this.isValidLookup(g)&&N&&(I=!0,g=P),this.isValidLookup(g)||(L=!0,g=l);const te=(i.missingKeyNoValueFallbackToKey||this.options.missingKeyNoValueFallbackToKey)&&L?void 0:g,J=N&&P!==g&&this.options.updateMissing;if(L||I||J){if(this.logger.log(J?"updateKey":"missingKey",m,d,l,J?P:g),o){const Q=this.resolve(l,{...i,keySeparator:!1});Q&&Q.res&&this.logger.warn("Seems the loaded translations were in flat JSON format instead of nested. Either set keySeparator: false on init or make sure your translations are published in nested format.")}let de=[];const ue=this.languageUtils.getFallbackCodes(this.options.fallbackLng,i.lng||this.language);if(this.options.saveMissingTo==="fallback"&&ue&&ue[0])for(let Q=0;Q<ue.length;Q++)de.push(ue[Q]);else this.options.saveMissingTo==="all"?de=this.languageUtils.toResolveHierarchy(i.lng||this.language):de.push(i.lng||this.language);const le=(Q,re,me)=>{const pe=N&&me!==g?me:te;this.options.missingKeyHandler?this.options.missingKeyHandler(Q,d,re,pe,J,i):this.backendConnector?.saveMissing&&this.backendConnector.saveMissing(Q,d,re,pe,J,i),this.emit("missingKey",Q,d,re,g)};this.options.saveMissing&&(this.options.saveMissingPlurals&&C?de.forEach(Q=>{const re=this.pluralResolver.getSuffixes(Q,i);D&&i[`defaultValue${this.options.pluralSeparator}zero`]&&re.indexOf(`${this.options.pluralSeparator}zero`)<0&&re.push(`${this.options.pluralSeparator}zero`),re.forEach(me=>{le([Q],l+me,i[`defaultValue${me}`]||P)})}):le(de,l,P))}g=this.extendTranslation(g,e,i,f,n),L&&g===l&&this.options.appendNamespaceToMissingKey&&(g=`${d}${u}${l}`),(L||I)&&this.options.parseMissingKeyHandler&&(g=this.options.parseMissingKeyHandler(this.options.appendNamespaceToMissingKey?`${d}${u}${l}`:l,I?g:void 0,i))}return s?(f.res=g,f.usedParams=this.getUsedParamsDetails(i),f):g}extendTranslation(e,a,n,i,s){if(this.i18nFormat?.parse)e=this.i18nFormat.parse(e,{...this.options.interpolation.defaultVariables,...n},n.lng||this.language||i.usedLng,i.usedNS,i.usedKey,{resolved:i});else if(!n.skipInterpolation){n.interpolation&&this.interpolator.init({...n,interpolation:{...this.options.interpolation,...n.interpolation}});const c=qa(e)&&(n?.interpolation?.skipOnVariables!==void 0?n.interpolation.skipOnVariables:this.options.interpolation.skipOnVariables);let d;if(c){const m=e.match(this.interpolator.nestingRegexp);d=m&&m.length}let u=n.replace&&!qa(n.replace)?n.replace:n;if(this.options.interpolation.defaultVariables&&(u={...this.options.interpolation.defaultVariables,...u}),e=this.interpolator.interpolate(e,u,n.lng||this.language||i.usedLng,n),c){const m=e.match(this.interpolator.nestingRegexp),p=m&&m.length;d<p&&(n.nest=!1)}!n.lng&&i&&i.res&&(n.lng=this.language||i.usedLng),n.nest!==!1&&(e=this.interpolator.nest(e,(...m)=>s?.[0]===m[0]&&!n.context?(this.logger.warn(`It seems you are nesting recursively key: ${m[0]} in key: ${a[0]}`),null):this.translate(...m,a),n)),n.interpolation&&this.interpolator.reset()}const o=n.postProcess||this.options.postProcess,l=qa(o)?[o]:o;return e!=null&&l?.length&&n.applyPostProcessor!==!1&&(e=iZ.handle(l,e,a,this.options&&this.options.postProcessPassResolved?{i18nResolved:{...i,usedParams:this.getUsedParamsDetails(n)},...n}:n,this)),e}resolve(e,a={}){let n,i,s,o,l;return qa(e)&&(e=[e]),e.forEach(c=>{if(this.isValidLookup(n))return;const d=this.extractFromKey(c,a),u=d.key;i=u;let m=d.namespaces;this.options.fallbackNS&&(m=m.concat(this.options.fallbackNS));const p=a.count!==void 0&&!qa(a.count),f=p&&!a.ordinal&&a.count===0,g=a.context!==void 0&&(qa(a.context)||typeof a.context=="number")&&a.context!=="",v=a.lngs?a.lngs:this.languageUtils.toResolveHierarchy(a.lng||this.language,a.fallbackLng);m.forEach(b=>{this.isValidLookup(n)||(l=b,!$q[`${v[0]}-${b}`]&&this.utils?.hasLoadedNamespace&&!this.utils?.hasLoadedNamespace(l)&&($q[`${v[0]}-${b}`]=!0,this.logger.warn(`key "${i}" for languages "${v.join(", ")}" won't get resolved as namespace "${l}" was not yet loaded`,"This means something IS WRONG in your setup. You access the t function before i18next.init / i18next.loadNamespace / i18next.changeLanguage was done. Wait for the callback or Promise to resolve before accessing it!!!")),v.forEach(x=>{if(this.isValidLookup(n))return;o=x;const S=[u];if(this.i18nFormat?.addLookupKeys)this.i18nFormat.addLookupKeys(S,u,x,b,a);else{let C;p&&(C=this.pluralResolver.getSuffix(x,a.count,a));const N=`${this.options.pluralSeparator}zero`,T=`${this.options.pluralSeparator}ordinal${this.options.pluralSeparator}`;if(p&&(a.ordinal&&C.indexOf(T)===0&&S.push(u+C.replace(T,this.options.pluralSeparator)),S.push(u+C),f&&S.push(u+N)),g){const j=`${u}${this.options.contextSeparator||"_"}${a.context}`;S.push(j),p&&(a.ordinal&&C.indexOf(T)===0&&S.push(j+C.replace(T,this.options.pluralSeparator)),S.push(j+C),f&&S.push(j+N))}}let k;for(;k=S.pop();)this.isValidLookup(n)||(s=k,n=this.getResource(x,b,k,a))}))})}),{res:n,usedKey:i,exactUsedKey:s,usedLng:o,usedNS:l}}isValidLookup(e){return e!==void 0&&!(!this.options.returnNull&&e===null)&&!(!this.options.returnEmptyString&&e==="")}getResource(e,a,n,i={}){return this.i18nFormat?.getResource?this.i18nFormat.getResource(e,a,n,i):this.resourceStore.getResource(e,a,n,i)}getUsedParamsDetails(e={}){const a=["defaultValue","ordinal","context","replace","lng","lngs","fallbackLng","ns","keySeparator","nsSeparator","returnObjects","returnDetails","joinArrays","postProcess","interpolation"],n=e.replace&&!qa(e.replace);let i=n?e.replace:e;if(n&&typeof e.count<"u"&&(i.count=e.count),this.options.interpolation.defaultVariables&&(i={...this.options.interpolation.defaultVariables,...i}),!n){i={...i};for(const s of a)delete i[s]}return i}static hasDefaultValue(e){const a="defaultValue";for(const n in e)if(Object.prototype.hasOwnProperty.call(e,n)&&a===n.substring(0,a.length)&&e[n]!==void 0)return!0;return!1}}class Vq{constructor(e){this.options=e,this.supportedLngs=this.options.supportedLngs||!1,this.logger=tu.create("languageUtils")}getScriptPartFromCode(e){if(e=Lw(e),!e||e.indexOf("-")<0)return null;const a=e.split("-");return a.length===2||(a.pop(),a[a.length-1].toLowerCase()==="x")?null:this.formatLanguageCode(a.join("-"))}getLanguagePartFromCode(e){if(e=Lw(e),!e||e.indexOf("-")<0)return e;const a=e.split("-");return this.formatLanguageCode(a[0])}formatLanguageCode(e){if(qa(e)&&e.indexOf("-")>-1){let a;try{a=Intl.getCanonicalLocales(e)[0]}catch{}return a&&this.options.lowerCaseLng&&(a=a.toLowerCase()),a||(this.options.lowerCaseLng?e.toLowerCase():e)}return this.options.cleanCode||this.options.lowerCaseLng?e.toLowerCase():e}isSupportedCode(e){return(this.options.load==="languageOnly"||this.options.nonExplicitSupportedLngs)&&(e=this.getLanguagePartFromCode(e)),!this.supportedLngs||!this.supportedLngs.length||this.supportedLngs.indexOf(e)>-1}getBestMatchFromCodes(e){if(!e)return null;let a;return e.forEach(n=>{if(a)return;const i=this.formatLanguageCode(n);(!this.options.supportedLngs||this.isSupportedCode(i))&&(a=i)}),!a&&this.options.supportedLngs&&e.forEach(n=>{if(a)return;const i=this.getScriptPartFromCode(n);if(this.isSupportedCode(i))return a=i;const s=this.getLanguagePartFromCode(n);if(this.isSupportedCode(s))return a=s;a=this.options.supportedLngs.find(o=>{if(o===s)return o;if(!(o.indexOf("-")<0&&s.indexOf("-")<0)&&(o.indexOf("-")>0&&s.indexOf("-")<0&&o.substring(0,o.indexOf("-"))===s||o.indexOf(s)===0&&s.length>1))return o})}),a||(a=this.getFallbackCodes(this.options.fallbackLng)[0]),a}getFallbackCodes(e,a){if(!e)return[];if(typeof e=="function"&&(e=e(a)),qa(e)&&(e=[e]),Array.isArray(e))return e;if(!a)return e.default||[];let n=e[a];return n||(n=e[this.getScriptPartFromCode(a)]),n||(n=e[this.formatLanguageCode(a)]),n||(n=e[this.getLanguagePartFromCode(a)]),n||(n=e.default),n||[]}toResolveHierarchy(e,a){const n=this.getFallbackCodes((a===!1?[]:a)||this.options.fallbackLng||[],e),i=[],s=o=>{o&&(this.isSupportedCode(o)?i.push(o):this.logger.warn(`rejecting language code not found in supportedLngs: ${o}`))};return qa(e)&&(e.indexOf("-")>-1||e.indexOf("_")>-1)?(this.options.load!=="languageOnly"&&s(this.formatLanguageCode(e)),this.options.load!=="languageOnly"&&this.options.load!=="currentOnly"&&s(this.getScriptPartFromCode(e)),this.options.load!=="currentOnly"&&s(this.getLanguagePartFromCode(e))):qa(e)&&s(this.formatLanguageCode(e)),n.forEach(o=>{i.indexOf(o)<0&&s(this.formatLanguageCode(o))}),i}}const Wq={zero:0,one:1,two:2,few:3,many:4,other:5},Kq={select:t=>t===1?"one":"other",resolvedOptions:()=>({pluralCategories:["one","other"]})};class Mme{constructor(e,a={}){this.languageUtils=e,this.options=a,this.logger=tu.create("pluralResolver"),this.pluralRulesCache={}}addRule(e,a){this.rules[e]=a}clearCache(){this.pluralRulesCache={}}getRule(e,a={}){const n=Lw(e==="dev"?"en":e),i=a.ordinal?"ordinal":"cardinal",s=JSON.stringify({cleanedCode:n,type:i});if(s in this.pluralRulesCache)return this.pluralRulesCache[s];let o;try{o=new Intl.PluralRules(n,{type:i})}catch{if(!Intl)return this.logger.error("No Intl support, please use an Intl polyfill!"),Kq;if(!e.match(/-|_/))return Kq;const c=this.languageUtils.getLanguagePartFromCode(e);o=this.getRule(c,a)}return this.pluralRulesCache[s]=o,o}needsPlural(e,a={}){let n=this.getRule(e,a);return n||(n=this.getRule("dev",a)),n?.resolvedOptions().pluralCategories.length>1}getPluralFormsOfKey(e,a,n={}){return this.getSuffixes(e,n).map(i=>`${a}${i}`)}getSuffixes(e,a={}){let n=this.getRule(e,a);return n||(n=this.getRule("dev",a)),n?n.resolvedOptions().pluralCategories.sort((i,s)=>Wq[i]-Wq[s]).map(i=>`${this.options.prepend}${a.ordinal?`ordinal${this.options.prepend}`:""}${i}`):[]}getSuffix(e,a,n={}){const i=this.getRule(e,n);return i?`${this.options.prepend}${n.ordinal?`ordinal${this.options.prepend}`:""}${i.select(a)}`:(this.logger.warn(`no plural rule found for: ${e}`),this.getSuffix("dev",a,n))}}const Yq=(t,e,a,n=".",i=!0)=>{let s=Sme(t,e,a);return!s&&i&&qa(a)&&(s=UL(t,a,n),s===void 0&&(s=UL(e,a,n))),s},uE=t=>t.replace(/\$/g,"$$$$");class Eme{constructor(e={}){this.logger=tu.create("interpolator"),this.options=e,this.format=e?.interpolation?.format||(a=>a),this.init(e)}init(e={}){e.interpolation||(e.interpolation={escapeValue:!0});const{escape:a,escapeValue:n,useRawValueToEscape:i,prefix:s,prefixEscaped:o,suffix:l,suffixEscaped:c,formatSeparator:d,unescapeSuffix:u,unescapePrefix:m,nestingPrefix:p,nestingPrefixEscaped:f,nestingSuffix:g,nestingSuffixEscaped:v,nestingOptionsSeparator:b,maxReplaces:x,alwaysFormat:S}=e.interpolation;this.escape=a!==void 0?a:_me,this.escapeValue=n!==void 0?n:!0,this.useRawValueToEscape=i!==void 0?i:!1,this.prefix=s?ex(s):o||"{{",this.suffix=l?ex(l):c||"}}",this.formatSeparator=d||",",this.unescapePrefix=u?"":m||"-",this.unescapeSuffix=this.unescapePrefix?"":u||"",this.nestingPrefix=p?ex(p):f||ex("$t("),this.nestingSuffix=g?ex(g):v||ex(")"),this.nestingOptionsSeparator=b||",",this.maxReplaces=x||1e3,this.alwaysFormat=S!==void 0?S:!1,this.resetRegExp()}reset(){this.options&&this.init(this.options)}resetRegExp(){const e=(a,n)=>a?.source===n?(a.lastIndex=0,a):new RegExp(n,"g");this.regexp=e(this.regexp,`${this.prefix}(.+?)${this.suffix}`),this.regexpUnescape=e(this.regexpUnescape,`${this.prefix}${this.unescapePrefix}(.+?)${this.unescapeSuffix}${this.suffix}`),this.nestingRegexp=e(this.nestingRegexp,`${this.nestingPrefix}((?:[^()"']+|"[^"]*"|'[^']*'|\\((?:[^()]|"[^"]*"|'[^']*')*\\))*?)${this.nestingSuffix}`)}interpolate(e,a,n,i){let s,o,l;const c=this.options&&this.options.interpolation&&this.options.interpolation.defaultVariables||{},d=f=>{if(f.indexOf(this.formatSeparator)<0){const x=Yq(a,c,f,this.options.keySeparator,this.options.ignoreJSONStructure);return this.alwaysFormat?this.format(x,void 0,n,{...i,...a,interpolationkey:f}):x}const g=f.split(this.formatSeparator),v=g.shift().trim(),b=g.join(this.formatSeparator).trim();return this.format(Yq(a,c,v,this.options.keySeparator,this.options.ignoreJSONStructure),b,n,{...i,...a,interpolationkey:v})};this.resetRegExp();const u=i?.missingInterpolationHandler||this.options.missingInterpolationHandler,m=i?.interpolation?.skipOnVariables!==void 0?i.interpolation.skipOnVariables:this.options.interpolation.skipOnVariables;return[{regex:this.regexpUnescape,safeValue:f=>uE(f)},{regex:this.regexp,safeValue:f=>this.escapeValue?uE(this.escape(f)):uE(f)}].forEach(f=>{for(l=0;s=f.regex.exec(e);){const g=s[1].trim();if(o=d(g),o===void 0)if(typeof u=="function"){const b=u(e,s,i);o=qa(b)?b:""}else if(i&&Object.prototype.hasOwnProperty.call(i,g))o="";else if(m){o=s[0];continue}else this.logger.warn(`missed to pass in variable ${g} for interpolating ${e}`),o="";else!qa(o)&&!this.useRawValueToEscape&&(o=Bq(o));const v=f.safeValue(o);if(e=e.replace(s[0],v),m?(f.regex.lastIndex+=o.length,f.regex.lastIndex-=s[0].length):f.regex.lastIndex=0,l++,l>=this.maxReplaces)break}}),e}nest(e,a,n={}){let i,s,o;const l=(c,d)=>{const u=this.nestingOptionsSeparator;if(c.indexOf(u)<0)return c;const m=c.split(new RegExp(`${u}[ ]*{`));let p=`{${m[1]}`;c=m[0],p=this.interpolate(p,o);const f=p.match(/'/g),g=p.match(/"/g);((f?.length??0)%2===0&&!g||g.length%2!==0)&&(p=p.replace(/'/g,'"'));try{o=JSON.parse(p),d&&(o={...d,...o})}catch(v){return this.logger.warn(`failed parsing options string in nesting for key ${c}`,v),`${c}${u}${p}`}return o.defaultValue&&o.defaultValue.indexOf(this.prefix)>-1&&delete o.defaultValue,c};for(;i=this.nestingRegexp.exec(e);){let c=[];o={...n},o=o.replace&&!qa(o.replace)?o.replace:o,o.applyPostProcessor=!1,delete o.defaultValue;const d=/{.*}/.test(i[1])?i[1].lastIndexOf("}")+1:i[1].indexOf(this.formatSeparator);if(d!==-1&&(c=i[1].slice(d).split(this.formatSeparator).map(u=>u.trim()).filter(Boolean),i[1]=i[1].slice(0,d)),s=a(l.call(this,i[1].trim(),o),o),s&&i[0]===e&&!qa(s))return s;qa(s)||(s=Bq(s)),s||(this.logger.warn(`missed to resolve ${i[1]} for nesting ${e}`),s=""),c.length&&(s=c.reduce((u,m)=>this.format(u,m,n.lng,{...n,interpolationkey:i[1].trim()}),s.trim())),e=e.replace(i[0],s),this.regexp.lastIndex=0}return e}}const Dme=t=>{let e=t.toLowerCase().trim();const a={};if(t.indexOf("(")>-1){const n=t.split("(");e=n[0].toLowerCase().trim();const i=n[1].substring(0,n[1].length-1);e==="currency"&&i.indexOf(":")<0?a.currency||(a.currency=i.trim()):e==="relativetime"&&i.indexOf(":")<0?a.range||(a.range=i.trim()):i.split(";").forEach(o=>{if(o){const[l,...c]=o.split(":"),d=c.join(":").trim().replace(/^'+|'+$/g,""),u=l.trim();a[u]||(a[u]=d),d==="false"&&(a[u]=!1),d==="true"&&(a[u]=!0),isNaN(d)||(a[u]=parseInt(d,10))}})}return{formatName:e,formatOptions:a}},Qq=t=>{const e={};return(a,n,i)=>{let s=i;i&&i.interpolationkey&&i.formatParams&&i.formatParams[i.interpolationkey]&&i[i.interpolationkey]&&(s={...s,[i.interpolationkey]:void 0});const o=n+JSON.stringify(s);let l=e[o];return l||(l=t(Lw(n),i),e[o]=l),l(a)}},Fme=t=>(e,a,n)=>t(Lw(a),n)(e);class Lme{constructor(e={}){this.logger=tu.create("formatter"),this.options=e,this.init(e)}init(e,a={interpolation:{}}){this.formatSeparator=a.interpolation.formatSeparator||",";const n=a.cacheInBuiltFormats?Qq:Fme;this.formats={number:n((i,s)=>{const o=new Intl.NumberFormat(i,{...s});return l=>o.format(l)}),currency:n((i,s)=>{const o=new Intl.NumberFormat(i,{...s,style:"currency"});return l=>o.format(l)}),datetime:n((i,s)=>{const o=new Intl.DateTimeFormat(i,{...s});return l=>o.format(l)}),relativetime:n((i,s)=>{const o=new Intl.RelativeTimeFormat(i,{...s});return l=>o.format(l,s.range||"day")}),list:n((i,s)=>{const o=new Intl.ListFormat(i,{...s});return l=>o.format(l)})}}add(e,a){this.formats[e.toLowerCase().trim()]=a}addCached(e,a){this.formats[e.toLowerCase().trim()]=Qq(a)}format(e,a,n,i={}){const s=a.split(this.formatSeparator);if(s.length>1&&s[0].indexOf("(")>1&&s[0].indexOf(")")<0&&s.find(l=>l.indexOf(")")>-1)){const l=s.findIndex(c=>c.indexOf(")")>-1);s[0]=[s[0],...s.splice(1,l)].join(this.formatSeparator)}return s.reduce((l,c)=>{const{formatName:d,formatOptions:u}=Dme(c);if(this.formats[d]){let m=l;try{const p=i?.formatParams?.[i.interpolationkey]||{},f=p.locale||p.lng||i.locale||i.lng||n;m=this.formats[d](l,f,{...u,...i,...p})}catch(p){this.logger.warn(p)}return m}else this.logger.warn(`there was no format function for ${d}`);return l},e)}}const Rme=(t,e)=>{t.pending[e]!==void 0&&(delete t.pending[e],t.pendingCount--)};class zme extends CT{constructor(e,a,n,i={}){super(),this.backend=e,this.store=a,this.services=n,this.languageUtils=n.languageUtils,this.options=i,this.logger=tu.create("backendConnector"),this.waitingReads=[],this.maxParallelReads=i.maxParallelReads||10,this.readingCalls=0,this.maxRetries=i.maxRetries>=0?i.maxRetries:5,this.retryTimeout=i.retryTimeout>=1?i.retryTimeout:350,this.state={},this.queue=[],this.backend?.init?.(n,i.backend,i)}queueLoad(e,a,n,i){const s={},o={},l={},c={};return e.forEach(d=>{let u=!0;a.forEach(m=>{const p=`${d}|${m}`;!n.reload&&this.store.hasResourceBundle(d,m)?this.state[p]=2:this.state[p]<0||(this.state[p]===1?o[p]===void 0&&(o[p]=!0):(this.state[p]=1,u=!1,o[p]===void 0&&(o[p]=!0),s[p]===void 0&&(s[p]=!0),c[m]===void 0&&(c[m]=!0)))}),u||(l[d]=!0)}),(Object.keys(s).length||Object.keys(o).length)&&this.queue.push({pending:o,pendingCount:Object.keys(o).length,loaded:{},errors:[],callback:i}),{toLoad:Object.keys(s),pending:Object.keys(o),toLoadLanguages:Object.keys(l),toLoadNamespaces:Object.keys(c)}}loaded(e,a,n){const i=e.split("|"),s=i[0],o=i[1];a&&this.emit("failedLoading",s,o,a),!a&&n&&this.store.addResourceBundle(s,o,n,void 0,void 0,{skipCopy:!0}),this.state[e]=a?-1:2,a&&n&&(this.state[e]=0);const l={};this.queue.forEach(c=>{wme(c.loaded,[s],o),Rme(c,e),a&&c.errors.push(a),c.pendingCount===0&&!c.done&&(Object.keys(c.loaded).forEach(d=>{l[d]||(l[d]={});const u=c.loaded[d];u.length&&u.forEach(m=>{l[d][m]===void 0&&(l[d][m]=!0)})}),c.done=!0,c.errors.length?c.callback(c.errors):c.callback())}),this.emit("loaded",l),this.queue=this.queue.filter(c=>!c.done)}read(e,a,n,i=0,s=this.retryTimeout,o){if(!e.length)return o(null,{});if(this.readingCalls>=this.maxParallelReads){this.waitingReads.push({lng:e,ns:a,fcName:n,tried:i,wait:s,callback:o});return}this.readingCalls++;const l=(d,u)=>{if(this.readingCalls--,this.waitingReads.length>0){const m=this.waitingReads.shift();this.read(m.lng,m.ns,m.fcName,m.tried,m.wait,m.callback)}if(d&&u&&i<this.maxRetries){setTimeout(()=>{this.read.call(this,e,a,n,i+1,s*2,o)},s);return}o(d,u)},c=this.backend[n].bind(this.backend);if(c.length===2){try{const d=c(e,a);d&&typeof d.then=="function"?d.then(u=>l(null,u)).catch(l):l(null,d)}catch(d){l(d)}return}return c(e,a,l)}prepareLoading(e,a,n={},i){if(!this.backend)return this.logger.warn("No backend was added via i18next.use. Will not load resources."),i&&i();qa(e)&&(e=this.languageUtils.toResolveHierarchy(e)),qa(a)&&(a=[a]);const s=this.queueLoad(e,a,n,i);if(!s.toLoad.length)return s.pending.length||i(),null;s.toLoad.forEach(o=>{this.loadOne(o)})}load(e,a,n){this.prepareLoading(e,a,{},n)}reload(e,a,n){this.prepareLoading(e,a,{reload:!0},n)}loadOne(e,a=""){const n=e.split("|"),i=n[0],s=n[1];this.read(i,s,"read",void 0,void 0,(o,l)=>{o&&this.logger.warn(`${a}loading namespace ${s} for language ${i} failed`,o),!o&&l&&this.logger.log(`${a}loaded namespace ${s} for language ${i}`,l),this.loaded(e,o,l)})}saveMissing(e,a,n,i,s,o={},l=()=>{}){if(this.services?.utils?.hasLoadedNamespace&&!this.services?.utils?.hasLoadedNamespace(a)){this.logger.warn(`did not save key "${n}" as the namespace "${a}" was not yet loaded`,"This means something IS WRONG in your setup. You access the t function before i18next.init / i18next.loadNamespace / i18next.changeLanguage was done. Wait for the callback or Promise to resolve before accessing it!!!");return}if(!(n==null||n==="")){if(this.backend?.create){const c={...o,isUpdate:s},d=this.backend.create.bind(this.backend);if(d.length<6)try{let u;d.length===5?u=d(e,a,n,i,c):u=d(e,a,n,i),u&&typeof u.then=="function"?u.then(m=>l(null,m)).catch(l):l(null,u)}catch(u){l(u)}else d(e,a,n,i,l,c)}!e||!e[0]||this.store.addResource(e[0],a,n,i)}}}const Xq=()=>({debug:!1,initAsync:!0,ns:["translation"],defaultNS:["translation"],fallbackLng:["dev"],fallbackNS:!1,supportedLngs:!1,nonExplicitSupportedLngs:!1,load:"all",preload:!1,simplifyPluralSuffix:!0,keySeparator:".",nsSeparator:":",pluralSeparator:"_",contextSeparator:"_",partialBundledLanguages:!1,saveMissing:!1,updateMissing:!1,saveMissingTo:"fallback",saveMissingPlurals:!0,missingKeyHandler:!1,missingInterpolationHandler:!1,postProcess:!1,postProcessPassResolved:!1,returnNull:!1,returnEmptyString:!0,returnObjects:!1,joinArrays:!1,returnedObjectHandler:!1,parseMissingKeyHandler:!1,appendNamespaceToMissingKey:!1,appendNamespaceToCIMode:!1,overloadTranslationOptionHandler:t=>{let e={};if(typeof t[1]=="object"&&(e=t[1]),qa(t[1])&&(e.defaultValue=t[1]),qa(t[2])&&(e.tDescription=t[2]),typeof t[2]=="object"||typeof t[3]=="object"){const a=t[3]||t[2];Object.keys(a).forEach(n=>{e[n]=a[n]})}return e},interpolation:{escapeValue:!0,format:t=>t,prefix:"{{",suffix:"}}",formatSeparator:",",unescapePrefix:"-",nestingPrefix:"$t(",nestingSuffix:")",nestingOptionsSeparator:",",maxReplaces:1e3,skipOnVariables:!0},cacheInBuiltFormats:!0}),Zq=t=>(qa(t.ns)&&(t.ns=[t.ns]),qa(t.fallbackLng)&&(t.fallbackLng=[t.fallbackLng]),qa(t.fallbackNS)&&(t.fallbackNS=[t.fallbackNS]),t.supportedLngs?.indexOf?.("cimode")<0&&(t.supportedLngs=t.supportedLngs.concat(["cimode"])),typeof t.initImmediate=="boolean"&&(t.initAsync=t.initImmediate),t),E_=()=>{},Ime=t=>{Object.getOwnPropertyNames(Object.getPrototypeOf(t)).forEach(a=>{typeof t[a]=="function"&&(t[a]=t[a].bind(t))})};class iw extends CT{constructor(e={},a){if(super(),this.options=Zq(e),this.services={},this.logger=tu,this.modules={external:[]},Ime(this),a&&!this.isInitialized&&!e.isClone){if(!this.options.initAsync)return this.init(e,a),this;setTimeout(()=>{this.init(e,a)},0)}}init(e={},a){this.isInitializing=!0,typeof e=="function"&&(a=e,e={}),e.defaultNS==null&&e.ns&&(qa(e.ns)?e.defaultNS=e.ns:e.ns.indexOf("translation")<0&&(e.defaultNS=e.ns[0]));const n=Xq();this.options={...n,...this.options,...Zq(e)},this.options.interpolation={...n.interpolation,...this.options.interpolation},e.keySeparator!==void 0&&(this.options.userDefinedKeySeparator=e.keySeparator),e.nsSeparator!==void 0&&(this.options.userDefinedNsSeparator=e.nsSeparator);const i=d=>d?typeof d=="function"?new d:d:null;if(!this.options.isClone){this.modules.logger?tu.init(i(this.modules.logger),this.options):tu.init(null,this.options);let d;this.modules.formatter?d=this.modules.formatter:d=Lme;const u=new Vq(this.options);this.store=new Gq(this.options.resources,this.options);const m=this.services;m.logger=tu,m.resourceStore=this.store,m.languageUtils=u,m.pluralResolver=new Mme(u,{prepend:this.options.pluralSeparator,simplifyPluralSuffix:this.options.simplifyPluralSuffix}),this.options.interpolation.format&&this.options.interpolation.format!==n.interpolation.format&&this.logger.deprecate("init: you are still using the legacy format function, please use the new approach: https://www.i18next.com/translation-function/formatting"),d&&(!this.options.interpolation.format||this.options.interpolation.format===n.interpolation.format)&&(m.formatter=i(d),m.formatter.init&&m.formatter.init(m,this.options),this.options.interpolation.format=m.formatter.format.bind(m.formatter)),m.interpolator=new Eme(this.options),m.utils={hasLoadedNamespace:this.hasLoadedNamespace.bind(this)},m.backendConnector=new zme(i(this.modules.backend),m.resourceStore,m,this.options),m.backendConnector.on("*",(f,...g)=>{this.emit(f,...g)}),this.modules.languageDetector&&(m.languageDetector=i(this.modules.languageDetector),m.languageDetector.init&&m.languageDetector.init(m,this.options.detection,this.options)),this.modules.i18nFormat&&(m.i18nFormat=i(this.modules.i18nFormat),m.i18nFormat.init&&m.i18nFormat.init(this)),this.translator=new rN(this.services,this.options),this.translator.on("*",(f,...g)=>{this.emit(f,...g)}),this.modules.external.forEach(f=>{f.init&&f.init(this)})}if(this.format=this.options.interpolation.format,a||(a=E_),this.options.fallbackLng&&!this.services.languageDetector&&!this.options.lng){const d=this.services.languageUtils.getFallbackCodes(this.options.fallbackLng);d.length>0&&d[0]!=="dev"&&(this.options.lng=d[0])}!this.services.languageDetector&&!this.options.lng&&this.logger.warn("init: no languageDetector is used and no lng is defined"),["getResource","hasResourceBundle","getResourceBundle","getDataByLanguage"].forEach(d=>{this[d]=(...u)=>this.store[d](...u)}),["addResource","addResources","addResourceBundle","removeResourceBundle"].forEach(d=>{this[d]=(...u)=>(this.store[d](...u),this)});const l=o0(),c=()=>{const d=(u,m)=>{this.isInitializing=!1,this.isInitialized&&!this.initializedStoreOnce&&this.logger.warn("init: i18next is already initialized. You should call init just once!"),this.isInitialized=!0,this.options.isClone||this.logger.log("initialized",this.options),this.emit("initialized",this.options),l.resolve(m),a(u,m)};if(this.languages&&!this.isInitialized)return d(null,this.t.bind(this));this.changeLanguage(this.options.lng,d)};return this.options.resources||!this.options.initAsync?c():setTimeout(c,0),l}loadResources(e,a=E_){let n=a;const i=qa(e)?e:this.language;if(typeof e=="function"&&(n=e),!this.options.resources||this.options.partialBundledLanguages){if(i?.toLowerCase()==="cimode"&&(!this.options.preload||this.options.preload.length===0))return n();const s=[],o=l=>{if(!l||l==="cimode")return;this.services.languageUtils.toResolveHierarchy(l).forEach(d=>{d!=="cimode"&&s.indexOf(d)<0&&s.push(d)})};i?o(i):this.services.languageUtils.getFallbackCodes(this.options.fallbackLng).forEach(c=>o(c)),this.options.preload?.forEach?.(l=>o(l)),this.services.backendConnector.load(s,this.options.ns,l=>{!l&&!this.resolvedLanguage&&this.language&&this.setResolvedLanguage(this.language),n(l)})}else n(null)}reloadResources(e,a,n){const i=o0();return typeof e=="function"&&(n=e,e=void 0),typeof a=="function"&&(n=a,a=void 0),e||(e=this.languages),a||(a=this.options.ns),n||(n=E_),this.services.backendConnector.reload(e,a,s=>{i.resolve(),n(s)}),i}use(e){if(!e)throw new Error("You are passing an undefined module! Please check the object you are passing to i18next.use()");if(!e.type)throw new Error("You are passing a wrong module! Please check the object you are passing to i18next.use()");return e.type==="backend"&&(this.modules.backend=e),(e.type==="logger"||e.log&&e.warn&&e.error)&&(this.modules.logger=e),e.type==="languageDetector"&&(this.modules.languageDetector=e),e.type==="i18nFormat"&&(this.modules.i18nFormat=e),e.type==="postProcessor"&&iZ.addPostProcessor(e),e.type==="formatter"&&(this.modules.formatter=e),e.type==="3rdParty"&&this.modules.external.push(e),this}setResolvedLanguage(e){if(!(!e||!this.languages)&&!(["cimode","dev"].indexOf(e)>-1)){for(let a=0;a<this.languages.length;a++){const n=this.languages[a];if(!(["cimode","dev"].indexOf(n)>-1)&&this.store.hasLanguageSomeTranslations(n)){this.resolvedLanguage=n;break}}!this.resolvedLanguage&&this.languages.indexOf(e)<0&&this.store.hasLanguageSomeTranslations(e)&&(this.resolvedLanguage=e,this.languages.unshift(e))}}changeLanguage(e,a){this.isLanguageChangingTo=e;const n=o0();this.emit("languageChanging",e);const i=l=>{this.language=l,this.languages=this.services.languageUtils.toResolveHierarchy(l),this.resolvedLanguage=void 0,this.setResolvedLanguage(l)},s=(l,c)=>{c?this.isLanguageChangingTo===e&&(i(c),this.translator.changeLanguage(c),this.isLanguageChangingTo=void 0,this.emit("languageChanged",c),this.logger.log("languageChanged",c)):this.isLanguageChangingTo=void 0,n.resolve((...d)=>this.t(...d)),a&&a(l,(...d)=>this.t(...d))},o=l=>{!e&&!l&&this.services.languageDetector&&(l=[]);const c=qa(l)?l:l&&l[0],d=this.store.hasLanguageSomeTranslations(c)?c:this.services.languageUtils.getBestMatchFromCodes(qa(l)?[l]:l);d&&(this.language||i(d),this.translator.language||this.translator.changeLanguage(d),this.services.languageDetector?.cacheUserLanguage?.(d)),this.loadResources(d,u=>{s(u,d)})};return!e&&this.services.languageDetector&&!this.services.languageDetector.async?o(this.services.languageDetector.detect()):!e&&this.services.languageDetector&&this.services.languageDetector.async?this.services.languageDetector.detect.length===0?this.services.languageDetector.detect().then(o):this.services.languageDetector.detect(o):o(e),n}getFixedT(e,a,n){const i=(s,o,...l)=>{let c;typeof o!="object"?c=this.options.overloadTranslationOptionHandler([s,o].concat(l)):c={...o},c.lng=c.lng||i.lng,c.lngs=c.lngs||i.lngs,c.ns=c.ns||i.ns,c.keyPrefix!==""&&(c.keyPrefix=c.keyPrefix||n||i.keyPrefix);const d=this.options.keySeparator||".";let u;return c.keyPrefix&&Array.isArray(s)?u=s.map(m=>(typeof m=="function"&&(m=HL(m,{...this.options,...o})),`${c.keyPrefix}${d}${m}`)):(typeof s=="function"&&(s=HL(s,{...this.options,...o})),u=c.keyPrefix?`${c.keyPrefix}${d}${s}`:s),this.t(u,c)};return qa(e)?i.lng=e:i.lngs=e,i.ns=a,i.keyPrefix=n,i}t(...e){return this.translator?.translate(...e)}exists(...e){return this.translator?.exists(...e)}setDefaultNamespace(e){this.options.defaultNS=e}hasLoadedNamespace(e,a={}){if(!this.isInitialized)return this.logger.warn("hasLoadedNamespace: i18next was not initialized",this.languages),!1;if(!this.languages||!this.languages.length)return this.logger.warn("hasLoadedNamespace: i18n.languages were undefined or empty",this.languages),!1;const n=a.lng||this.resolvedLanguage||this.languages[0],i=this.options?this.options.fallbackLng:!1,s=this.languages[this.languages.length-1];if(n.toLowerCase()==="cimode")return!0;const o=(l,c)=>{const d=this.services.backendConnector.state[`${l}|${c}`];return d===-1||d===0||d===2};if(a.precheck){const l=a.precheck(this,o);if(l!==void 0)return l}return!!(this.hasResourceBundle(n,e)||!this.services.backendConnector.backend||this.options.resources&&!this.options.partialBundledLanguages||o(n,e)&&(!i||o(s,e)))}loadNamespaces(e,a){const n=o0();return this.options.ns?(qa(e)&&(e=[e]),e.forEach(i=>{this.options.ns.indexOf(i)<0&&this.options.ns.push(i)}),this.loadResources(i=>{n.resolve(),a&&a(i)}),n):(a&&a(),Promise.resolve())}loadLanguages(e,a){const n=o0();qa(e)&&(e=[e]);const i=this.options.preload||[],s=e.filter(o=>i.indexOf(o)<0&&this.services.languageUtils.isSupportedCode(o));return s.length?(this.options.preload=i.concat(s),this.loadResources(o=>{n.resolve(),a&&a(o)}),n):(a&&a(),Promise.resolve())}dir(e){if(e||(e=this.resolvedLanguage||(this.languages?.length>0?this.languages[0]:this.language)),!e)return"rtl";try{const i=new Intl.Locale(e);if(i&&i.getTextInfo){const s=i.getTextInfo();if(s&&s.direction)return s.direction}}catch{}const a=["ar","shu","sqr","ssh","xaa","yhd","yud","aao","abh","abv","acm","acq","acw","acx","acy","adf","ads","aeb","aec","afb","ajp","apc","apd","arb","arq","ars","ary","arz","auz","avl","ayh","ayl","ayn","ayp","bbz","pga","he","iw","ps","pbt","pbu","pst","prp","prd","ug","ur","ydd","yds","yih","ji","yi","hbo","men","xmn","fa","jpr","peo","pes","prs","dv","sam","ckb"],n=this.services?.languageUtils||new Vq(Xq());return e.toLowerCase().indexOf("-latn")>1?"ltr":a.indexOf(n.getLanguagePartFromCode(e))>-1||e.toLowerCase().indexOf("-arab")>1?"rtl":"ltr"}static createInstance(e={},a){const n=new iw(e,a);return n.createInstance=iw.createInstance,n}cloneInstance(e={},a=E_){const n=e.forkResourceStore;n&&delete e.forkResourceStore;const i={...this.options,...e,isClone:!0},s=new iw(i);if((e.debug!==void 0||e.prefix!==void 0)&&(s.logger=s.logger.clone(e)),["store","services","language"].forEach(l=>{s[l]=this[l]}),s.services={...this.services},s.services.utils={hasLoadedNamespace:s.hasLoadedNamespace.bind(s)},n){const l=Object.keys(this.store.data).reduce((c,d)=>(c[d]={...this.store.data[d]},c[d]=Object.keys(c[d]).reduce((u,m)=>(u[m]={...c[d][m]},u),c[d]),c),{});s.store=new Gq(l,i),s.services.resourceStore=s.store}return s.translator=new rN(s.services,i),s.translator.on("*",(l,...c)=>{s.emit(l,...c)}),s.init(i,a),s.translator.options=i,s.translator.backendConnector.services.utils={hasLoadedNamespace:s.hasLoadedNamespace.bind(s)},s}toJSON(){return{options:this.options,store:this.store,language:this.language,languages:this.languages,resolvedLanguage:this.resolvedLanguage}}}const Ao=iw.createInstance();Ao.createInstance;Ao.dir;Ao.init;Ao.loadResources;Ao.reloadResources;Ao.use;Ao.changeLanguage;Ao.getFixedT;Ao.t;Ao.exists;Ao.setDefaultNamespace;Ao.hasLoadedNamespace;Ao.loadNamespaces;Ao.loadLanguages;const Ome=(t,e,a,n)=>{const i=[a,{code:e,...n||{}}];if(t?.services?.logger?.forward)return t.services.logger.forward(i,"warn","react-i18next::",!0);Lg(i[0])&&(i[0]=`react-i18next:: ${i[0]}`),t?.services?.logger?.warn?t.services.logger.warn(...i):console?.warn&&console.warn(...i)},Jq={},oZ=(t,e,a,n)=>{Lg(a)&&Jq[a]||(Lg(a)&&(Jq[a]=new Date),Ome(t,e,a,n))},lZ=(t,e)=>()=>{if(t.isInitialized)e();else{const a=()=>{setTimeout(()=>{t.off("initialized",a)},0),e()};t.on("initialized",a)}},qL=(t,e,a)=>{t.loadNamespaces(e,lZ(t,a))},e8=(t,e,a,n)=>{if(Lg(a)&&(a=[a]),t.options.preload&&t.options.preload.indexOf(e)>-1)return qL(t,a,n);a.forEach(i=>{t.options.ns.indexOf(i)<0&&t.options.ns.push(i)}),t.loadLanguages(e,lZ(t,n))},Bme=(t,e,a={})=>!e.languages||!e.languages.length?(oZ(e,"NO_LANGUAGES","i18n.languages were undefined or empty",{languages:e.languages}),!0):e.hasLoadedNamespace(t,{lng:a.lng,precheck:(n,i)=>{if(a.bindI18n&&a.bindI18n.indexOf("languageChanging")>-1&&n.services.backendConnector.backend&&n.isLanguageChangingTo&&!i(n.isLanguageChangingTo,t))return!1}}),Lg=t=>typeof t=="string",Ume=t=>typeof t=="object"&&t!==null,Hme=/&(?:amp|#38|lt|#60|gt|#62|apos|#39|quot|#34|nbsp|#160|copy|#169|reg|#174|hellip|#8230|#x2F|#47);/g,qme={"&amp;":"&","&#38;":"&","&lt;":"<","&#60;":"<","&gt;":">","&#62;":">","&apos;":"'","&#39;":"'","&quot;":'"',"&#34;":'"',"&nbsp;":" ","&#160;":" ","&copy;":"©","&#169;":"©","&reg;":"®","&#174;":"®","&hellip;":"…","&#8230;":"…","&#x2F;":"/","&#47;":"/"},Gme=t=>qme[t],$me=t=>t.replace(Hme,Gme);let GL={bindI18n:"languageChanged",bindI18nStore:"",transEmptyNodeValue:"",transSupportBasicHtmlNodes:!0,transWrapTextNodes:"",transKeepBasicHtmlNodesFor:["br","strong","i","p"],useSuspense:!0,unescape:$me,transDefaultProps:void 0};const Vme=(t={})=>{GL={...GL,...t}},Wme=()=>GL;let cZ;const Kme=t=>{cZ=t},Yme=()=>cZ,Qme={type:"3rdParty",init(t){Vme(t.options.react),Kme(t)}},Xme=y.createContext();class Zme{constructor(){this.usedNamespaces={}}addUsedNamespaces(e){e.forEach(a=>{this.usedNamespaces[a]||(this.usedNamespaces[a]=!0)})}getUsedNamespaces(){return Object.keys(this.usedNamespaces)}}var mE={exports:{}},pE={};var t8;function Jme(){if(t8)return pE;t8=1;var t=db();function e(m,p){return m===p&&(m!==0||1/m===1/p)||m!==m&&p!==p}var a=typeof Object.is=="function"?Object.is:e,n=t.useState,i=t.useEffect,s=t.useLayoutEffect,o=t.useDebugValue;function l(m,p){var f=p(),g=n({inst:{value:f,getSnapshot:p}}),v=g[0].inst,b=g[1];return s(function(){v.value=f,v.getSnapshot=p,c(v)&&b({inst:v})},[m,f,p]),i(function(){return c(v)&&b({inst:v}),m(function(){c(v)&&b({inst:v})})},[m]),o(f),f}function c(m){var p=m.getSnapshot;m=m.value;try{var f=p();return!a(m,f)}catch{return!0}}function d(m,p){return p()}var u=typeof window>"u"||typeof window.document>"u"||typeof window.document.createElement>"u"?d:l;return pE.useSyncExternalStore=t.useSyncExternalStore!==void 0?t.useSyncExternalStore:u,pE}var a8;function dZ(){return a8||(a8=1,mE.exports=Jme()),mE.exports}var gI=dZ();const epe=(t,e)=>Lg(e)?e:Ume(e)&&Lg(e.defaultValue)?e.defaultValue:Array.isArray(t)?t[t.length-1]:t,tpe={t:epe,ready:!1},ape=()=>()=>{},wt=(t,e={})=>{const{i18n:a}=e,{i18n:n,defaultNS:i}=y.useContext(Xme)||{},s=a||n||Yme();s&&!s.reportNamespaces&&(s.reportNamespaces=new Zme),s||oZ(s,"NO_I18NEXT_INSTANCE","useTranslation: You will need to pass in an i18next instance by using initReactI18next");const o=y.useMemo(()=>({...Wme(),...s?.options?.react,...e}),[s,e]),{useSuspense:l,keyPrefix:c}=o,d=i||s?.options?.defaultNS,u=Lg(d)?[d]:d||["translation"],m=y.useMemo(()=>u,u);s?.reportNamespaces?.addUsedNamespaces?.(m);const p=y.useRef(0),f=y.useCallback(P=>{if(!s)return ape;const{bindI18n:E,bindI18nStore:R}=o,O=()=>{p.current+=1,P()};return E&&s.on(E,O),R&&s.store.on(R,O),()=>{E&&E.split(" ").forEach(I=>s.off(I,O)),R&&R.split(" ").forEach(I=>s.store.off(I,O))}},[s,o]),g=y.useRef(),v=y.useCallback(()=>{if(!s)return tpe;const P=!!(s.isInitialized||s.initializedStoreOnce)&&m.every(Y=>Bme(Y,s,o)),E=e.lng||s.language,R=p.current,O=g.current;if(O&&O.ready===P&&O.lng===E&&O.keyPrefix===c&&O.revision===R)return O;const L={t:s.getFixedT(E,o.nsMode==="fallback"?m:m[0],c),ready:P,lng:E,keyPrefix:c,revision:R};return g.current=L,L},[s,m,c,o,e.lng]),[b,x]=y.useState(0),{t:S,ready:k}=gI.useSyncExternalStore(f,v,v);y.useEffect(()=>{if(s&&!k&&!l){const P=()=>x(E=>E+1);e.lng?e8(s,e.lng,m,P):qL(s,m,P)}},[s,e.lng,m,k,l,b]);const C=s||{},N=y.useRef(null),T=y.useRef(),j=P=>{const E=Object.getOwnPropertyDescriptors(P);E.__original&&delete E.__original;const R=Object.create(Object.getPrototypeOf(P),E);if(!Object.prototype.hasOwnProperty.call(R,"__original"))try{Object.defineProperty(R,"__original",{value:P,writable:!1,enumerable:!1,configurable:!1})}catch{}return R},D=y.useMemo(()=>{const P=C,E=P?.language;let R=P;P&&(N.current&&N.current.__original===P?T.current!==E?(R=j(P),N.current=R,T.current=E):R=N.current:(R=j(P),N.current=R,T.current=E));const O=[S,R,k];return O.t=S,O.i18n=R,O.ready=k,O},[S,C,k,C.resolvedLanguage,C.language,C.languages]);if(s&&l&&!k)throw new Promise(P=>{const E=()=>P();e.lng?e8(s,e.lng,m,E):qL(s,m,E)});return D},{slice:rpe,forEach:npe}=[];function ipe(t){return npe.call(rpe.call(arguments,1),e=>{if(e)for(const a in e)t[a]===void 0&&(t[a]=e[a])}),t}function spe(t){return typeof t!="string"?!1:[/<\s*script.*?>/i,/<\s*\/\s*script\s*>/i,/<\s*img.*?on\w+\s*=/i,/<\s*\w+\s*on\w+\s*=.*?>/i,/javascript\s*:/i,/vbscript\s*:/i,/expression\s*\(/i,/eval\s*\(/i,/alert\s*\(/i,/document\.cookie/i,/document\.write\s*\(/i,/window\.location/i,/innerHTML/i].some(a=>a.test(t))}const r8=/^[\u0009\u0020-\u007e\u0080-\u00ff]+$/,ope=function(t,e){const n=arguments.length>2&&arguments[2]!==void 0?arguments[2]:{path:"/"},i=encodeURIComponent(e);let s=`${t}=${i}`;if(n.maxAge>0){const o=n.maxAge-0;if(Number.isNaN(o))throw new Error("maxAge should be a Number");s+=`; Max-Age=${Math.floor(o)}`}if(n.domain){if(!r8.test(n.domain))throw new TypeError("option domain is invalid");s+=`; Domain=${n.domain}`}if(n.path){if(!r8.test(n.path))throw new TypeError("option path is invalid");s+=`; Path=${n.path}`}if(n.expires){if(typeof n.expires.toUTCString!="function")throw new TypeError("option expires is invalid");s+=`; Expires=${n.expires.toUTCString()}`}if(n.httpOnly&&(s+="; HttpOnly"),n.secure&&(s+="; Secure"),n.sameSite)switch(typeof n.sameSite=="string"?n.sameSite.toLowerCase():n.sameSite){case!0:s+="; SameSite=Strict";break;case"lax":s+="; SameSite=Lax";break;case"strict":s+="; SameSite=Strict";break;case"none":s+="; SameSite=None";break;default:throw new TypeError("option sameSite is invalid")}return n.partitioned&&(s+="; Partitioned"),s},n8={create(t,e,a,n){let i=arguments.length>4&&arguments[4]!==void 0?arguments[4]:{path:"/",sameSite:"strict"};a&&(i.expires=new Date,i.expires.setTime(i.expires.getTime()+a*60*1e3)),n&&(i.domain=n),document.cookie=ope(t,e,i)},read(t){const e=`${t}=`,a=document.cookie.split(";");for(let n=0;n<a.length;n++){let i=a[n];for(;i.charAt(0)===" ";)i=i.substring(1,i.length);if(i.indexOf(e)===0)return i.substring(e.length,i.length)}return null},remove(t,e){this.create(t,"",-1,e)}};var lpe={name:"cookie",lookup(t){let{lookupCookie:e}=t;if(e&&typeof document<"u")return n8.read(e)||void 0},cacheUserLanguage(t,e){let{lookupCookie:a,cookieMinutes:n,cookieDomain:i,cookieOptions:s}=e;a&&typeof document<"u"&&n8.create(a,t,n,i,s)}},cpe={name:"querystring",lookup(t){let{lookupQuerystring:e}=t,a;if(typeof window<"u"){let{search:n}=window.location;!window.location.search&&window.location.hash?.indexOf("?")>-1&&(n=window.location.hash.substring(window.location.hash.indexOf("?")));const s=n.substring(1).split("&");for(let o=0;o<s.length;o++){const l=s[o].indexOf("=");l>0&&s[o].substring(0,l)===e&&(a=s[o].substring(l+1))}}return a}},dpe={name:"hash",lookup(t){let{lookupHash:e,lookupFromHashIndex:a}=t,n;if(typeof window<"u"){const{hash:i}=window.location;if(i&&i.length>2){const s=i.substring(1);if(e){const o=s.split("&");for(let l=0;l<o.length;l++){const c=o[l].indexOf("=");c>0&&o[l].substring(0,c)===e&&(n=o[l].substring(c+1))}}if(n)return n;if(!n&&a>-1){const o=i.match(/\/([a-zA-Z-]*)/g);return Array.isArray(o)?o[typeof a=="number"?a:0]?.replace("/",""):void 0}}}return n}};let tx=null;const i8=()=>{if(tx!==null)return tx;try{if(tx=typeof window<"u"&&window.localStorage!==null,!tx)return!1;const t="i18next.translate.boo";window.localStorage.setItem(t,"foo"),window.localStorage.removeItem(t)}catch{tx=!1}return tx};var upe={name:"localStorage",lookup(t){let{lookupLocalStorage:e}=t;if(e&&i8())return window.localStorage.getItem(e)||void 0},cacheUserLanguage(t,e){let{lookupLocalStorage:a}=e;a&&i8()&&window.localStorage.setItem(a,t)}};let ax=null;const s8=()=>{if(ax!==null)return ax;try{if(ax=typeof window<"u"&&window.sessionStorage!==null,!ax)return!1;const t="i18next.translate.boo";window.sessionStorage.setItem(t,"foo"),window.sessionStorage.removeItem(t)}catch{ax=!1}return ax};var mpe={name:"sessionStorage",lookup(t){let{lookupSessionStorage:e}=t;if(e&&s8())return window.sessionStorage.getItem(e)||void 0},cacheUserLanguage(t,e){let{lookupSessionStorage:a}=e;a&&s8()&&window.sessionStorage.setItem(a,t)}},ppe={name:"navigator",lookup(t){const e=[];if(typeof navigator<"u"){const{languages:a,userLanguage:n,language:i}=navigator;if(a)for(let s=0;s<a.length;s++)e.push(a[s]);n&&e.push(n),i&&e.push(i)}return e.length>0?e:void 0}},hpe={name:"htmlTag",lookup(t){let{htmlTag:e}=t,a;const n=e||(typeof document<"u"?document.documentElement:null);return n&&typeof n.getAttribute=="function"&&(a=n.getAttribute("lang")),a}},fpe={name:"path",lookup(t){let{lookupFromPathIndex:e}=t;if(typeof window>"u")return;const a=window.location.pathname.match(/\/([a-zA-Z-]*)/g);return Array.isArray(a)?a[typeof e=="number"?e:0]?.replace("/",""):void 0}},gpe={name:"subdomain",lookup(t){let{lookupFromSubdomainIndex:e}=t;const a=typeof e=="number"?e+1:1,n=typeof window<"u"&&window.location?.hostname?.match(/^(\w{2,5})\.(([a-z0-9-]{1,63}\.[a-z]{2,6})|localhost)/i);if(n)return n[a]}};let uZ=!1;try{document.cookie,uZ=!0}catch{}const mZ=["querystring","cookie","localStorage","sessionStorage","navigator","htmlTag"];uZ||mZ.splice(1,1);const bpe=()=>({order:mZ,lookupQuerystring:"lng",lookupCookie:"i18next",lookupLocalStorage:"i18nextLng",lookupSessionStorage:"i18nextLng",caches:["localStorage"],excludeCacheFor:["cimode"],convertDetectedLanguage:t=>t});class pZ{constructor(e){let a=arguments.length>1&&arguments[1]!==void 0?arguments[1]:{};this.type="languageDetector",this.detectors={},this.init(e,a)}init(){let e=arguments.length>0&&arguments[0]!==void 0?arguments[0]:{languageUtils:{}},a=arguments.length>1&&arguments[1]!==void 0?arguments[1]:{},n=arguments.length>2&&arguments[2]!==void 0?arguments[2]:{};this.services=e,this.options=ipe(a,this.options||{},bpe()),typeof this.options.convertDetectedLanguage=="string"&&this.options.convertDetectedLanguage.indexOf("15897")>-1&&(this.options.convertDetectedLanguage=i=>i.replace("-","_")),this.options.lookupFromUrlIndex&&(this.options.lookupFromPathIndex=this.options.lookupFromUrlIndex),this.i18nOptions=n,this.addDetector(lpe),this.addDetector(cpe),this.addDetector(upe),this.addDetector(mpe),this.addDetector(ppe),this.addDetector(hpe),this.addDetector(fpe),this.addDetector(gpe),this.addDetector(dpe)}addDetector(e){return this.detectors[e.name]=e,this}detect(){let e=arguments.length>0&&arguments[0]!==void 0?arguments[0]:this.options.order,a=[];return e.forEach(n=>{if(this.detectors[n]){let i=this.detectors[n].lookup(this.options);i&&typeof i=="string"&&(i=[i]),i&&(a=a.concat(i))}}),a=a.filter(n=>n!=null&&!spe(n)).map(n=>this.options.convertDetectedLanguage(n)),this.services&&this.services.languageUtils&&this.services.languageUtils.getBestMatchFromCodes?a:a.length>0?a[0]:null}cacheUserLanguage(e){let a=arguments.length>1&&arguments[1]!==void 0?arguments[1]:this.options.caches;a&&(this.options.excludeCacheFor&&this.options.excludeCacheFor.indexOf(e)>-1||a.forEach(n=>{this.detectors[n]&&this.detectors[n].cacheUserLanguage(e,this.options)}))}}pZ.type="languageDetector";const xpe={nav:{printers:"Printers",archives:"Archives",queue:"Print Queue",stats:"Statistics",profiles:"Profiles",maintenance:"Maintenance",projects:"Projects",inventory:"Filament",files:"File Manager",makerworld:"MakerWorld",notifications:"Notifications",settings:"Settings",system:"System",collapseSidebar:"Collapse sidebar",expandSidebar:"Expand sidebar",update:"Update",updateAvailable:"Update available: v{{version}}",updateAvailableBanner:"Version {{version}} is available!",viewUpdate:"View update",viewOnGithub:"View on GitHub",keyboardShortcuts:"Keyboard shortcuts (?)",switchToLight:"Switch to light mode",switchToDark:"Switch to dark mode",switchToSystem:"Switch to system mode",smartSwitches:"Smart Switches",logout:"Logout",installApp:"Install app",installAppSuccess:"Bambuddy was installed"},common:{save:"Save",saving:"Saving...",cancel:"Cancel",delete:"Delete",edit:"Edit",add:"Add",close:"Close",confirm:"Confirm",loading:"Loading...",error:"Error",errorLoading:"Error loading data",retry:"Retry",success:"Success",warning:"Warning",enabled:"Enabled",disabled:"Disabled",yes:"Yes",no:"No",on:"On",off:"Off",all:"All",none:"None",search:"Search",filter:"Filter",sort:"Sort",refresh:"Refresh",download:"Download",upload:"Upload",uploading:"Uploading...",uploadFailed:"Upload failed",actions:"Actions",status:"Status",name:"Name",description:"Description",date:"Date",time:"Time",hours:"hours",minutes:"minutes",seconds:"seconds",days:"days",enable:"Enable",disable:"Disable",permissions:"Permissions",noPrinters:"No printers configured",noData:"No data available",linkNotFound:"Link not found",required:"Required",optional:"Optional",dismiss:"Dismiss",apply:"Apply",reset:"Reset",export:"Export",import:"Import",clear:"Clear",selectAll:"Select All",deselectAll:"Deselect All",noChange:"— No change —",unchanged:"Unchanged",unassigned:"Unassigned",unknown:"Unknown",unknownError:"Unknown error",today:"Today",tomorrow:"Tomorrow",asap:"ASAP",overdue:"Overdue",now:"Now",collapse:"Collapse",expand:"Expand",viewArchive:"View archive",viewInFileManager:"View in File Manager",addedBy:"Added by {{username}}",prints:"prints",more:"+{{count}} more",ascending:"Ascending",descending:"Descending",back:"Back",copy:"Copy",copied:"Copied!",printer:"Printer",remove:"Remove",type:"Type",print:"Print",rename:"Rename",move:"Move",create:"Create",duplicate:"Duplicate",left:"Left",right:"Right"},printers:{title:"Printers",addPrinter:"Add Printer",addPreflight:{checking:"Checking connection...",warning:"Some connection checks failed. This printer may show as offline. Review the checks below, fix what you can, or save anyway.",back:"Back",saveAnyway:"Save anyway"},editPrinter:"Edit Printer",deletePrinter:"Delete Printer",printerName:"Printer Name",serialNumber:"Serial Number",ipAddress:"IP Address / Hostname",accessCode:"Access Code",model:"Model",nozzleCount:"Nozzle Count",autoArchive:"Auto Archive",status:{available:"Available",idle:"Idle",printing:"Printing",paused:"Paused",offline:"Offline",problem:"Problem",error:"Error",finished:"Finished",unknown:"Unknown"},temperatures:{nozzle:"Nozzle",bed:"Bed",chamber:"Chamber"},progress:"{{percent}}% complete",timeRemaining:"{{time}} remaining",deleteConfirm:'Are you sure you want to delete "{{name}}"?',maintenanceOk:"Maintenance OK",maintenanceWarning:"{{count}} warning",maintenanceWarning_plural:"{{count}} warnings",maintenanceDue:"{{count}} due",maintenanceDue_plural:"{{count}} due",sort:{name:"Name",status:"Status",model:"Model",location:"Location",ascending:"Sort ascending",descending:"Sort descending"},cardSize:{small:"Small cards",medium:"Medium cards",large:"Large cards",extraLarge:"Extra large cards"},hideOffline:"Hide offline",nextAvailable:"Next available",powerOn:"Power On",offlinePrintersWithPlugs:"Offline printers with smart plugs",noPrintersConfigured:"No printers configured yet",search:"Search printers...",noSearchResults:"No printers match your search or filters",filter:{allStatuses:"All statuses",allLocations:"All locations"},toolbar:{filters:"Filters",view:"View",actions:"Actions"},readyToPrint:"Ready to print",external:"External",extL:"Ext-L",extR:"Ext-R",deleteArchives:"Delete print archives",noLabel:"No label",printPreview:"Print preview",width:"Width",height:"Height",noObjectsFound:"No objects found",objectsLoadedOnPrintStart:"Objects are loaded when a print starts",willBeSkipped:"Will be skipped",name:"Name",serialCannotBeChanged:"Serial number cannot be changed",locationHelp:"Used to group printers and filter queue jobs",wifiSignal:{veryWeak:"Very weak",weak:"Weak",fair:"Fair",good:"Good",excellent:"Excellent"},maintenanceUpToDate:"All maintenance up to date - Click to view",chamberLightOn:"Turn on chamber light",chamberLightOff:"Turn off chamber light",files:"Files",browseFiles:"Browse printer files",autoOffAfterPrint:"Auto power-off after print",autoOffExecuted:"Auto-off was executed - turn printer on to reset",hmsErrors:"HMS Errors",viewHmsErrors:"View {{count}} HMS error(s)",resume:"Resume",pause:"Pause",stop:"Stop",camera:"Camera",skipObject:"Skip Object",reconnect:"Reconnect",forceRefresh:"Force Refresh",forceRefreshSuccess:"Refresh requested",mqttDebug:"MQTT Debug",printerInformation:"Printer Information",copyToClipboard:"Copy",copied:"Copied!",state:"State",wifiSignalLabel:"WiFi Signal",developerMode:"Developer Mode",enabled:"Enabled",disabled:"Disabled",addedOn:"Added",sdCard:"SD Card",inserted:"Inserted",notInserted:"Not inserted",totalPrintHours:"Print Hours",activeNozzle:"Active: {{nozzle}} nozzle",nozzleRack:"Nozzle Rack",nozzleDocked:"Docked",nozzleMounted:"Mounted",nozzleActive:"Active",nozzleIdle:"Idle",nozzleDiameter:"Diameter",nozzleType:"Type",nozzleStatus:"Status",nozzleFilament:"Filament",nozzleWear:"Wear",nozzleMaxTemp:"Max Temp",nozzleSerial:"Serial",nozzleHardenedSteel:"Hardened Steel",nozzleStainlessSteel:"Stainless Steel",nozzleTungstenCarbide:"Tungsten Carbide",nozzleFlow:"Flow",nozzleHighFlow:"High Flow",nozzleStandardFlow:"Standard",firmwareUpdate:"Firmware Update",firmwareInstructions:"On the printer's touchscreen, go to",firmwareNav:"Navigate to",settings:"Settings",firmware:"Firmware",discoverPrinters:"Discover Printers",searching:"Searching...",manualEntry:"Manual Entry",addFromCloud:"Add from Cloud",toast:{printerDeleted:"Printer deleted",missingSpoolAssignment:"Print started on {{printer}}. Missing spool assignment for: {{slots}}",printerAdded:"Printer added",printerUpdated:"Printer updated",failedToDelete:"Failed to delete printer",failedToAdd:"Failed to add printer",connectionFailedNotAdded:"Could not connect to the printer. Verify the IP, serial number, and access code, and confirm LAN-only mode is on. The printer was not added.",failedToUpdate:"Failed to update printer",commandSent:"Command sent",failedToSendCommand:"Failed to send command",turnedOn:"{{name}} turned on",failedToPowerOn:"Failed to power on {{name}}",scriptTriggered:"Script triggered",printStopped:"Print stopped",printPaused:"Print paused",printResumed:"Print resumed",referenceDeleted:"Reference deleted",detectionAreaSaved:"Detection area saved",failedToRunScript:"Failed to run script",failedToStopPrint:"Failed to stop print",failedToPausePrint:"Failed to pause print",failedToResumePrint:"Failed to resume print",failedToControlChamberLight:"Failed to control chamber light",failedToSetSpeed:"Failed to set print speed",failedToUpdateSetting:"Failed to update setting",failedToSkipObjects:"Failed to skip objects",failedToRereadRfid:"Failed to re-read RFID",failedToCheckPlate:"Failed to check plate",failedToUpdateLabel:"Failed to update label",failedToDeleteReference:"Failed to delete reference",failedToSaveDetectionArea:"Failed to save detection area",plateCheckEnabled:"Plate check enabled",plateCheckDisabled:"Plate check disabled",calibrationSaved:"Calibration saved!",calibrationFailed:"Calibration failed",rfidRereadInitiated:"RFID re-read initiated",loadInitiated:"Loading filament…",unloadInitiated:"Unloading filament…",failedToLoad:"Failed to load filament",failedToUnload:"Failed to unload filament"},connection:{connected:"Connected",offline:"Offline"},plateStatus:{markCleared:"Mark plate as cleared",cleared:"Plate Clear",notCleared:"Plate not Clear",inUse:"Plate in Use"},queue:{inQueue:"{{count}} print in queue",inQueue_plural:"{{count}} prints in queue"},controls:"Controls",rfid:{reread:"Re-read RFID"},ams:{load:"Load",unload:"Unload"},bedJog:{title:"Move build plate",bed:"Bed",step:"Step (mm)",up:"Move plate up",down:"Move plate down",disabledWhilePrinting:"Disabled while printing",notHomedTitle:"Printer is not homed",notHomedMessage:"The printer has not been homed since the last print. Run auto-home first for safe positioning (parks the toolhead, then homes X, Y, and Z), or move anyway — soft endstops will be bypassed.",homeZ:"Auto Home",moveAnyway:"Move anyway",homingStarted:"Auto-homing printer…"},permission:{noAdd:"You do not have permission to add printers",noEdit:"You do not have permission to edit printers",noDelete:"You do not have permission to delete printers",noControl:"You do not have permission to control printers",noFiles:"You do not have permission to access printer files",noAmsRfid:"You do not have permission to re-read AMS RFID",noSmartPlugControl:"You do not have permission to control smart plugs",noCamera:"You do not have permission to view cameras"},modal:{addTitle:"Add Printer",editTitle:"Edit Printer",myPrinter:"My Printer",selectModel:"Select model...",locationGroup:"Location / Group (optional)",locationPlaceholder:"e.g., Workshop, Office, Basement",autoArchiveLabel:"Auto-archive completed prints",fromPrinterSettings:"From printer settings",modelOptional:"Model (optional)",saveChanges:"Save Changes"},skipObjects:{tooltip:"Skip objects",onlyWhilePrinting:"Skip objects (only while printing)",requiresMultiple:"Skip objects (requires 2+ objects)",title:"Skip Objects",matchIdsInfo:"Match IDs with your printer display",printerShowsIds:"The printer screen shows object IDs on the build plate",skipSelected:"Skip Selected",skipping:"Skipping...",noObjectsSelected:"No objects selected",selectObjectsToSkip:"Select objects you want to skip from the current print",skipped:"skipped",objectsSkipped:"Objects skipped",activeCount:"{{count}} active",waitForLayer:"Wait for layer 2+ to skip objects (currently layer {{layer}})",skip:"Skip",confirmTitle:"Skip Object?",confirmMessage:'Are you sure you want to skip "{{name}}"? This cannot be undone.'},confirm:{deleteTitle:"Delete Printer",deleteMessage:'Are you sure you want to delete "{{name}}"? This will remove all connection settings.',deleteArchivesNote:"All print history for this printer will be permanently deleted.",keepArchivesNote:"Print history will be kept but no longer associated with this printer.",stopTitle:"Stop Print",stopMessage:'Are you sure you want to stop the current print on "{{name}}"? This will cancel the print job.',stopButton:"Stop Print",pauseTitle:"Pause Print",pauseMessage:'Are you sure you want to pause the current print on "{{name}}"?',pauseButton:"Pause Print",resumeTitle:"Resume Print",resumeMessage:'Are you sure you want to resume the print on "{{name}}"?',resumeButton:"Resume Print",powerOnTitle:"Power On Printer",powerOnMessage:'Are you sure you want to turn ON the power for "{{name}}"?',powerOnButton:"Power On",powerOffTitle:"Power Off Printer",powerOffMessage:'Are you sure you want to turn OFF the power for "{{name}}"?',powerOffWarning:'WARNING: "{{name}}" is currently printing! Are you sure you want to turn OFF the power? This will interrupt the print and may damage the printer.',powerOffButton:"Power Off",haToggleTitle:'Toggle "{{name}}"',haToggleMessage:"Toggle the Home Assistant entity {{entity}}? This may turn power off if it is currently on.",haToggleWarning:'WARNING: "{{name}}" is currently printing! Toggling {{entity}} may cut power and interrupt the print. Continue?',haToggleButton:"Toggle"},bulk:{select:"Select",selectAll:"Select All",selectByLocation:"Select by Location",selected:"{{count}} selected",actions:{stop:"Stop",pause:"Pause",resume:"Resume",clearPlate:"Clear Bed",clearHMS:"Clear Notifications"},confirm:{stopTitle:"Stop {{count}} Prints",stopMessage:"This will cancel active prints on {{count}} printer(s). This action cannot be undone.",stopButton:"Stop All",pauseTitle:"Pause {{count}} Prints",pauseMessage:"This will pause active prints on {{count}} printer(s).",pauseButton:"Pause All",clearPlateTitle:"Clear {{count}} Print Beds",clearPlateMessage:"This will clear the print bed on {{count}} printer(s) and may trigger queued jobs.",clearPlateButton:"Clear All"},success:"{{action}} completed on {{count}} printer(s)",partial:"{{succeeded}} succeeded, {{failed}} failed",noneApplicable:"No selected printers are in the right state for this action",selectByState:"Select by State"},discovery:{title:"Discover Printers",searching:"Searching...",scanning:"Scanning...",scanProgress:"Scanning... {{scanned}}/{{total}}",foundPrinters:"Found {{count}} printer(s)",noPrintersFound:"No printers found",noPrintersFoundSubnet:"No printers found in the specified subnet.",noPrintersFoundNetwork:"No printers found on the network.",allConfigured:"All discovered printers are already configured.",alreadyAdded:"Already added",select:"Select",manualEntry:"Manual Entry",addFromCloud:"Add from Cloud",subnetToScan:"Subnet to scan",dockerNote:"Docker detected. Enter your printer's subnet in CIDR notation. Requires network_mode: host in docker-compose.yml.",scanSubnet:"Scan Subnet for Printers",discoverNetwork:"Discover Printers on Network",scanningSubnet:"Scanning subnet for Bambu printers...",scanningNetwork:"Scanning network...",serialRequired:"Serial required",unknown:"Unknown",failedToStart:"Failed to start discovery",customSubnetOption:"Custom subnet...",customSubnetLabel:"Custom subnet (CIDR)",customSubnetNote:"Use a custom subnet if your printer is on a different network than this server. The FTP (990) and MQTT (8883) ports must be reachable across the routing boundary."},drying:{start:"Start Drying",stop:"Stop Drying",temperature:"Temperature",duration:"Duration",hours:"hours",timeRemaining:"{{time}} left",active:"Drying",notSupported:"Drying not supported",powerRequired:"Connect AMS power adapter to enable drying",startingDrying:"Starting drying...",stoppingDrying:"Stopping drying...",rotateTray:"Rotate spool during drying"},filaments:"Filaments",openCameraOverlay:"Open camera overlay",openCameraWindow:"Open camera in new window",firmwareUpdateAvailable:"Firmware update available: {{current}} → {{latest}}",firmwareUpToDate:"Firmware {{version}} — Up to date",firmwareUpdateButton:"Update",plateDetection:{noPermission:"You do not have permission to update printers",enabledClick:"Plate check enabled - Click to disable",disabledClick:"Plate check disabled - Click to enable",manageCalibration:"Manage plate detection calibration",calibrationRequired:"Calibration Required",calibrationInstructions:"Please ensure the build plate is <strong>completely empty</strong>, then click Calibrate.",calibrationDescription:"Calibration captures a reference image of the empty plate. Future checks will compare against this reference to detect objects.",calibrationTip:"<strong>Tip:</strong> You can store up to 5 calibrations for different plates. The system automatically uses the best match when checking.",plateEmpty:"Plate appears empty",objectsDetected:"Objects detected on plate",confidence:"Confidence",difference:"Difference",analysisPreview:"Analysis preview:",analysisLegend:"Green box = detection area, Red overlay = differences from calibration",savedReferences:"Saved References ({{count}}/{{max}})",deleteReference:"Delete reference",labelPlaceholder:"Label...",clickToEdit:"{{label}} - Click to edit",clickToAddLabel:"Click to add label"},speed:{title:"Print Speed",silent:"Silent (50%)",standard:"Standard (100%)",sport:"Sport (124%)",ludicrous:"Ludicrous (166%)"},airduct:{title:"Airduct Mode",cooling:"Cooling",heating:"Heating"},noSdCard:"No SD",door:{open:"Open",closed:"Closed"},fans:{partCooling:"Part Cooling Fan",auxiliary:"Auxiliary Fan",chamber:"Chamber Fan"},clickToViewHmsErrors:"Click to view HMS errors",estimatedCompletion:"Estimated completion time",plateNumber:"Plate {{number}}",slotOptions:"Slot options",amsPopup:{friendlyName:"AMS Name",friendlyNamePlaceholder:"e.g. AMS Friendly Name",serialNumber:"Serial Number",firmwareVersion:"Firmware",save:"Save",clear:"Clear",noEditPermission:"You do not have permission to rename AMS units"},firmwareModal:{title:"Firmware Update",titleUpToDate:"Firmware Info",currentVersion:"Current:",latestVersion:"Latest:",releaseNotes:"Release Notes",checkingPrereqs:"Checking prerequisites...",sdCardReady:"SD card ready. Click below to upload firmware.",uploadedSuccess:"Firmware uploaded to SD card!",applyInstructions:"To apply the update on your printer:",step1:"On the printer's touchscreen, go to <strong>Settings</strong>",step2:"Navigate to <strong>Firmware</strong>",step3:"Select <strong>Update from SD card</strong>",step4:"The update will take 10-20 minutes",done:"Done",starting:"Starting...",uploadFirmware:"Upload Firmware",uploadFailed:"Failed to start upload: {{error}}",uploadedToast:"Firmware uploaded! Trigger update from printer screen.",availableVersions:"Available versions",usable:"Usable",unavailable:"Unavailable",installed:"Installed",newerBadge:"newer",olderBadge:"older",currentBadge:"current"},accessCodePlaceholder:"Leave empty to keep current",roi:{title:"Detection Area (ROI)",xStart:"X Start",yStart:"Y Start",width:"Width",height:"Height",instruction:"Adjust the detection area to focus on the build plate. The green box in the preview shows the current area."},developerModeWarning:"Developer LAN mode is not enabled on: {{names}}. Some features may not work.",howToEnable:"How to enable",incompatibleFile:"This file was sliced for {{slicedFor}}, but this printer is a {{printerModel}}",dropNotPrintable:"Only .gcode and .gcode.3mf files can be printed",dropToPrint:"Drop to print",cannotPrint:"Printer busy"},archives:{title:"Print Archives",searchPlaceholder:"Search archives...",filterByPrinter:"Filter by printer",filterByStatus:"Filter by status",sortBy:"Sort by",sortNewest:"Newest first",sortOldest:"Oldest first",sortName:"Name",sortDuration:"Duration",sortLargest:"Largest first",sortSmallest:"Smallest first",sortSize:"Size",noArchives:"No archives found",noArchivesSearch:"No archives match your search",originalPrintNotVisible:"Original print not visible - try clearing filters",noArchivesYet:"No archives yet",prints:"prints",pagination:{showing:"Showing",to:"to",of:"of",show:"Show",page:"Page",all:"All"},loadingArchives:"Loading archives...",releaseToUpload:"Release to upload",showAll:"Show all",showFavoritesOnly:"Show favorites only",gridView:"Grid view",listView:"List view",calendarView:"Calendar view",logView:"Print Log",manageTags:"Manage Tags",showFailedPrints:"Show failed prints",hideFailedPrints:"Hide failed prints",hideDuplicates:"Hide Duplicates",viewOriginalPrint:"Click to view original print (#{{id}})",printTime:"Print Time",filamentUsed:"Filament Used",cost:"Cost",reprint:"Reprint",preview:"Preview",deleteArchive:"Delete Archive",deleteConfirm:"Are you sure you want to delete this archive?",favorite:"Favorite",unfavorite:"Remove from favorites",viewDetails:"View Details",status:{completed:"Completed",failed:"Failed",stopped:"Stopped"},toast:{source3mfAttached:"Source 3MF attached: {{filename}}",failedUploadSource3mf:"Failed to upload source 3MF",source3mfRemoved:"Source 3MF removed",failedRemoveSource3mf:"Failed to remove source 3MF",f3dAttached:"F3D attached: {{filename}}",failedUploadF3d:"Failed to upload F3D",f3dRemoved:"F3D removed",failedRemoveF3d:"Failed to remove F3D",timelapseAttached:"Timelapse attached: {{filename}}",timelapseAlreadyAttached:"Timelapse already attached",noMatchingTimelapse:"No matching timelapse found",failedScanTimelapse:"Failed to scan for timelapse",failedAttachTimelapse:"Failed to attach timelapse",timelapseRemoved:"Timelapse removed",failedRemoveTimelapse:"Failed to remove timelapse",timelapseUploaded:"Timelapse uploaded: {{filename}}",failedUploadTimelapse:"Failed to upload timelapse",archiveDeleted:"Archive deleted",failedDeleteArchive:"Failed to delete archive",addedToFavorites:"Added to favorites",removedFromFavorites:"Removed from favorites",projectUpdated:"Project updated",failedUpdateProject:"Failed to update project",linkCopied:"Link copied to clipboard",failedCopyLink:"Failed to copy link",photoDeleted:"Photo deleted",failedDeletePhoto:"Failed to delete photo",failedDeleteArchives:"Failed to delete archives",failedUpdateFavorites:"Failed to update favorites",exportDownloaded:"Export downloaded",exportFailed:"Export failed"},menu:{print:"Print",schedule:"Schedule",openInBambuStudio:"Open in Slicer",slice:"Slice",externalLink:"External Link",viewOnMakerWorld:"View on MakerWorld",preview3d:"3D Preview",viewTimelapse:"View Timelapse",scanForTimelapse:"Scan for Timelapse",uploadTimelapse:"Upload Timelapse",removeTimelapse:"Remove Timelapse",downloadSource3mf:"Download Source 3MF",uploadSource3mf:"Upload Source 3MF",replaceSource3mf:"Replace Source 3MF",removeSource3mf:"Remove Source 3MF",uploadF3d:"Upload F3D",replaceF3d:"Replace F3D",downloadF3d:"Download F3D",removeF3d:"Remove F3D",download:"Download",copyDownloadLink:"Copy Download Link",qrCode:"QR Code",viewPhotos:"View Photos",viewPhotosCount:"View Photos ({{count}})",projectPage:"Project Page",addToFavorites:"Add to Favorites",removeFromFavorites:"Remove from Favorites",edit:"Edit",printLog:"Print Log",goToProject:"Go to Project: {{name}}",addToProject:"Add to Project",removeFromProject:"Remove from Project",loading:"Loading...",noProjectsAvailable:"No projects available",searchProjects:"Search projects…",select:"Select",deselect:"Deselect",delete:"Delete"},permission:{noReprint:"You do not have permission to reprint this archive",noAddToQueue:"You do not have permission to add to queue",noUpdateArchives:"You do not have permission to update archives",noUploadFiles:"You do not have permission to upload files",noDownload:"You do not have permission to download archives",noCopyLink:"You do not have permission to copy download links",noDelete:"You do not have permission to delete this archive",noCreate:"You do not have permission to create archives"},platePicker:{title:"Select plate to preview",hint:"This archive has multiple plates. Pick one to open in the GCode viewer.",plateLabel:"Plate {{index}}",objectCount:"{{count}} object",objectCount_plural:"{{count}} objects",noGcode:"This archive has no sliced G-code to preview. Open it in Bambu Studio to slice first."},card:{previousPlate:"Previous plate",nextPlate:"Next plate",plateNumber:"Plate {{index}}",moreOptions:"Right-click for more options",addToFavorites:"Add to favorites",removeFromFavorites:"Remove from favorites",cancelled:"cancelled",failed:"failed",duplicate:"duplicate",duplicateTitle:"This model has been printed before",openSource3mf:"Open source 3MF in Bambu Studio (right-click for more options)",downloadF3d:"Download Fusion 360 design file",viewTimelapse:"View timelapse",viewPhoto:"View 1 photo",viewPhotos:"View {{count}} photos",openFolder:"Open folder: {{name}}",slicedFile:"Sliced file - ready to print",sourceFile:"Source file only - no AMS mapping available",gcode:"GCODE",source:"SOURCE",project:"Project: {{name}}",runsBadge:"{{count}} prints",runsBadgeTitle:"{{count}} prints total — {{successful}} successful, {{failed}} failed. Click to see the full print log.",estimated:"Estimated: {{time}}",actual:"Actual: {{time}}",accuracy:"Accuracy: {{percent}}%",filament:"{{weight}}g",layer:"{{count}} layer",layers:"{{count}} layers",object:"{{count}} object",objects:"{{count}} objects",slicedFor:"Sliced for {{model}}",uploadedBy:"Uploaded By",noPermissionReprint:"You do not have permission to reprint",noFileForReprint:"No 3MF file available — the file could not be downloaded from the printer when the print was recorded",noPermissionEdit:"You do not have permission to edit archives",noPermissionDelete:"You do not have permission to delete archives",reprint:"Reprint",schedulePrint:"Schedule Print",schedule:"Schedule",openInBambuStudio:"Open in Slicer",openInBambuStudioToSlice:"Open in Slicer to slice",slice:"Slice",externalLink:"External Link",makerWorld:"MakerWorld: {{designer}}",viewProject:"View project",noExternalLink:"No external link",preview3d:"3D Preview",download:"Download",edit:"Edit",delete:"Delete"},runLog:{title:"Print Log",modalTitle:"Print Log — {{name}}",modalTitleFallback:"this archive",empty:"No print events recorded for this archive yet.",col:{date:"Date",status:"Status",duration:"Duration",filament:"Filament",cost:"Cost"},status:{completed:"Completed",failed:"Failed",cancelled:"Cancelled",stopped:"Stopped",skipped:"Skipped",printing:"Printing"}},modal:{deleteArchive:"Delete Archive",deleteConfirm:'Are you sure you want to delete "{{name}}"? This action cannot be undone.',deleteButton:"Delete",deletePurgeStats:"Also remove this print from Quick Stats (filament, time, cost, energy)",removeSource3mf:"Remove Source 3MF",removeSource3mfConfirm:'Are you sure you want to remove the source 3MF file from "{{name}}"? This will delete the original slicer project file.',removeButton:"Remove",removeF3d:"Remove F3D",removeF3dConfirm:'Are you sure you want to remove the Fusion 360 design file from "{{name}}"?',removeTimelapse:"Remove Timelapse",removeTimelapseConfirm:'Are you sure you want to remove the timelapse video from "{{name}}"?',timelapse:"{{name}} - Timelapse",selectTimelapse:"Select Timelapse",selectTimelapseDesc:"No auto-match found. Select the timelapse for this print:",deleteArchives:"Delete Archives",deleteArchivesConfirm:"Are you sure you want to delete {{count}} archive(s)? This action cannot be undone.",deleteCount:"Delete {{count}}"},page:{title:"Archives",printsCount:"{{filtered}} of {{total}} prints",dropFilesHere:"Drop .3mf files here",releaseToUpload:"Release to upload",only3mfSupported:"Only .3mf files are supported",close:"Close",selected:"{{count}} selected",selectAll:"Select All",tags:"Tags",project:"Project",favorite:"Favorite",delete:"Delete",toggledFavorites:"Toggled favorites for {{count}} archive(s)",failedUpdateFavorites:"Failed to update favorites",archivesDeleted:"{{count}} archive(s) deleted",failedDeleteArchives:"Failed to delete archives",photoDeleted:"Photo deleted",failedDeletePhoto:"Failed to delete photo"},list:{name:"Name",printer:"Printer",date:"Date",size:"Size",actions:"Actions",hasTimelapse:"Has timelapse"},log:{date:"Date",printName:"Print Name",printer:"Printer",user:"User",status:"Status",duration:"Duration",filament:"Filament",allPrinters:"All Printers",allUsers:"All Users",allStatuses:"All Statuses",cancelled:"Cancelled",skipped:"Skipped",dateFrom:"From",dateTo:"To",noEntries:"No print log entries found",showing:"Showing {{count}} of {{total}} entries",rowsPerPage:"Rows",page:"Page",prev:"Prev",next:"Next",clearLog:"Clear Log",clearLogTitle:"Clear Print Log",clearLogConfirm:"All print log entries will be permanently deleted. Archives and queue items are not affected. This action cannot be undone. Are you sure?",clearLogButton:"Clear All",cleared:"{{count}} log entries cleared",clearFailed:"Failed to clear print log"}},queue:{title:"Print Queue",subtitle:"Schedule and manage your print jobs",addToQueue:"Add to Queue",filamentShort:{rowBadge:"Insufficient filament for the assigned spool",rowTooltip:"The dispatch scheduler flagged this item. Click Play to see the per-slot deficit and decide whether to print anyway.",confirmTitle:"Insufficient filament",confirmIntro:"The assigned spool cannot satisfy at least one slot. Print anyway?",lineItem:"Slot {{slot}}: needs {{required}} g, {{remaining}} g remaining",unknown:"unknown",printAnyway:"Print Anyway"},print:"Print",reprint:"Re-print",schedulePrint:"Schedule Print",editQueueItem:"Edit Queue Item",printToPrinters:"Print to {{count}} Printers",queueToPrinters:"Queue to {{count}} Printers",queueSelectedPlates:"Queue {{count}} Plates",selectAllPlates:"Select All {{count}} Plates",deselectAll:"Deselect All",printQueued:"Print queued",itemsQueued:"{{count}} items queued",sending:"Sending...",sendingProgress:"Sending {{current}}/{{total}}...",adding:"Adding...",addingProgress:"Adding {{current}}/{{total}}...",savingProgress:"Saving {{current}}/{{total}}...",clearQueue:"Clear Queue",clearHistory:"Clear History",emptyQueue:"Queue is empty",position:"Position",scheduledTime:"Scheduled Time",moveUp:"Move Up",moveDown:"Move Down",startNow:"Start Now",printingInProgress:"Printing in progress...",viewArchive:"View archive",viewInFileManager:"View in File Manager",itemCount:"{{count}} item",itemCount_plural:"{{count}} items",dragToReorder:"Drag to reorder (ASAP only)",reorderHint:"Position only affects ASAP items. Scheduled items run at their set time.",sjf:{label:"SJF",tooltip:"Shortest Job First — scheduler prioritizes shorter prints"},addedBy:"Added by {{name}}",nextInQueue:"Next in queue",clearPlateSuccess:"Plate cleared — ready for next print",plateNumber:"Plate {{index}}",quantity:"Quantity",quantityHint:"Creates {{count}} queue items",activeBatches:"Active Batches",batchProgress:"{{completed}} of {{total}} completed",cancelBatch:"Cancel Remaining",batchCancelled:"Remaining batch items cancelled",cancelBatchConfirmTitle:"Cancel Batch",cancelBatchConfirmMessage:"Cancel all remaining pending items in this batch?",batch:"Batch",sections:{currentlyPrinting:"Currently Printing",queued:"Queued",history:"History"},status:{pending:"Pending",waiting:"Waiting",printing:"Printing",paused:"Paused",completed:"Completed",failed:"Failed",skipped:"Skipped",cancelled:"Cancelled"},summary:{printing:"Printing",queued:"Queued",totalTime:"Total Queue Time",totalWeight:"Total Queue Weight",history:"History"},filter:{allPrinters:"All Printers",unassigned:"Unassigned",allStatus:"All Status",allLocations:"All Locations",any:"Any"},sort:{byPosition:"Sort by Position",byName:"Sort by Name",byPrinter:"Sort by Printer",bySchedule:"Sort by Schedule",byDate:"Sort by Date",ascendingOldest:"Ascending (oldest first)",descendingNewest:"Descending (newest first)"},badges:{staged:"Staged",requiresPrevious:"Requires previous success",autoPowerOff:"Auto power off",gcodeInjection:"G-code"},empty:{title:"No prints scheduled",description:'Schedule a print from the Archives page using the "Schedule" option in the context menu, or drag and drop files to get started.'},time:{asap:"ASAP",overdue:"Overdue",now:"Now",lessThanMinute:"In less than a minute",inMinutes:"In {{count}} min",inHours:"In {{count}} hours"},actions:{stopPrint:"Stop Print",startPrint:"Start Print",requeue:"Re-queue"},bulkEdit:{title:"Edit {{count}} Item",title_plural:"Edit {{count}} Items",description:"Only changed settings will be applied to selected items.",printer:"Printer",noChange:"— No change —",queueOptions:"Queue Options",staged:"Staged (manual start)",autoPowerOff:"Auto power off after print",requirePrevious:"Require previous success",printOptions:"Print Options",bedLevelling:"Bed levelling",flowCalibration:"Flow calibration",vibrationCalibration:"Vibration calibration",layerInspection:"First layer inspection",timelapse:"Timelapse",useAms:"Use AMS",applyChanges:"Apply Changes",selectAll:"Select All",deselectAll:"Deselect All",selected:"{{count}} selected",editSelected:"Edit Selected",cancelSelected:"Cancel Selected"},confirm:{cancelTitle:"Cancel Scheduled Print",cancelMessage:'Are you sure you want to cancel "{{name}}"?',stopTitle:"Stop Print",stopMessage:'Are you sure you want to stop the current print "{{name}}"? This will cancel the print job on the printer.',removeTitle:"Remove from History",removeMessage:'Are you sure you want to remove "{{name}}" from the queue history?',clearHistoryTitle:"Clear History",clearHistoryMessage:"Are you sure you want to remove all {{count}} item(s) from the history?",cancelButton:"Cancel Print",stopButton:"Stop Print",thisPrint:"this print",thisItem:"this item"},toast:{cancelled:"Queue item cancelled",cancelFailed:"Failed to cancel item",removed:"Queue item removed",removeFailed:"Failed to remove item",stopped:"Print stopped",stopFailed:"Failed to stop print",released:"Print released to queue",startFailed:"Failed to start print",reorderFailed:"Failed to reorder queue",historyCleared:"Cleared {{count}} history item(s)",clearHistoryFailed:"Failed to clear history",updateFailed:"Failed to update items",bulkCancelled:"Cancelled {{count}} item(s)",bulkCancelFailed:"Failed to cancel items"},timeline:{listView:"List",timelineView:"Timeline",unassigned:"Unassigned",noData:"No scheduled prints for this day",allDoneBy:"All prints estimated done by {{time}}",staged:"Staged",filterAll:"Show All",filterPrinting:"Printing",filterQueued:"Queued",time:{anyMoment:"any moment",minutesLeft:"{{minutes}}m left",hoursLeft:"{{hours}}h left",hoursMinutesLeft:"{{hours}}h {{minutes}}m left"},day:{previous:"Previous day",next:"Next day",today:"Today"}},permissions:{noStopPrint:"You do not have permission to stop prints",noStartPrint:"You do not have permission to start prints",noEdit:"You do not have permission to edit this queue item",noCancel:"You do not have permission to cancel this queue item",noRequeue:"You do not have permission to re-queue items",noRemove:"You do not have permission to remove this queue item",noClearHistory:"You do not have permission to clear all history",noEditItems:"You do not have permission to edit queue items",noCancelItems:"You do not have permission to cancel queue items"}},backgroundDispatch:{unknownFile:"Unknown file",unknownPrinter:"Unknown printer",startingPrints:"Starting prints",progressSummary:"{{complete}}/{{total}} complete • Dispatched: {{dispatched}} • Processing: {{processing}}",expandDetails:"Expand dispatch details",collapseDetails:"Collapse dispatch details",dismissToast:"Dismiss dispatch toast",cancelDispatchJob:"Cancel dispatch job",cancel:"Cancel",cancelling:"Cancelling…",awaitingPrinter:"Awaiting printer…",status:{dispatched:"Dispatched",processing:"Processing",completed:"Completed",failed:"Failed",cancelled:"Cancelled"},toast:{cancellingUpload:"Cancelling upload...",cancelled:"Dispatch cancelled",cancelFailed:"Failed to cancel dispatch",completeWithFailures:"Background dispatch complete: {{completed}} succeeded, {{failed}} failed",completeSuccess:"Background dispatch complete: {{completed}} succeeded",printStartedRemaining:"{{completed}} print(s) started, {{remaining}} more sending..."}},stats:{title:"Statistics",subtitle:"Drag widgets to rearrange. Click the eye icon to hide.",overview:"Overview",totalPrints:"Total Prints",successRate:"Success Rate",totalPrintTime:"Total Print Time",printTime:"Print Time",totalFilament:"Total Filament Used",filamentUsed:"Filament Used",filamentCost:"Filament Cost",totalCost:"Total Cost",energyUsed:"Energy Used",energyCost:"Energy Cost",energyWarmingUpTooltip:"Energy tracking is still collecting hourly snapshots. Date-range totals will become accurate once at least one snapshot exists before the selected range. Early values may undercount.",averagePrintTime:"Average Print Time",printsPerDay:"Prints per Day",byPrinter:"By Printer",printsByPrinter:"Prints by Printer",byMaterial:"By Material",byMonth:"By Month",last7Days:"Last 7 Days",last30Days:"Last 30 Days",last90Days:"Last 90 Days",allTime:"All Time",quickStats:"Quick Stats",printActivity:"Print Activity",filamentTypes:"Filament Types",filamentTrends:"Filament Trends",failureAnalysis:"Failure Analysis",timeAccuracy:"Time Accuracy",successful:"Successful:",failed:"Failed:",cancelled:"Cancelled:",perfectEstimate:"100% = perfect estimate",noTimeAccuracyData:"No time accuracy data yet",noFilamentData:"No filament data available",noPrinterData:"No printer data available",noPrintData:"No print data available",noPrintDataLast30Days:"No print data in the last 30 days",failureReasons:"Failure Reasons",topFailureReasons:"Top Failure Reasons",failedPrintsCount:"{{failed}} / {{total}} prints failed",lastWeekRate:"Last week: {{rate}}%",resetLayout:"Reset Layout",recalculateCosts:"Recalculate Costs",recalculateCostsHint:"Recalculate all archive costs using current filament prices",exportStats:"Export Stats",exportAsCsv:"Export as CSV",exportAsExcel:"Export as Excel",hiddenCount:"{{count}} Hidden",exportDownloaded:"Export downloaded",exportFailed:"Export failed",layoutReset:"Layout reset",recalculatedCosts:"Recalculated costs for {{count}} archives",recalculateFailed:"Failed to recalculate costs",loadingStats:"Loading statistics...",noPermissionResetLayout:"You do not have permission to reset layout",noPermissionRecalculate:"You do not have permission to recalculate costs",noPrintDataInRange:"No print data in selected range",periodFilament:"Period Filament",periodCost:"Period Cost",avgPerPrint:"Avg per Print",usageOverTime:"Usage Over Time",filamentByWeight:"Weight",printDuration:"Print Duration",printerUtilization:"Printer Utilization",filamentSuccess:"Success by Material",printHabits:"Print Habits",printTimeOfDay:"Print Time of Day",colorDistribution:"Color Distribution",noColorData:"No color data available",records:"Records",longestPrint:"Longest Print",heaviestPrint:"Heaviest Print",mostExpensivePrint:"Most Expensive",busiestDay:"Busiest Day",successStreak:"Success Streak",streakPrint:"consecutive print",streakPrints:"{{count}} consecutive prints",printerStats:"Printer Stats",hours:"hours",avgPrints:"Avg. prints",noArchiveData:"No print data available",filamentByTime:"Time",avgWeight:"Avg. weight",avgTime:"Avg. time",filamentByPrints:"Prints",timeframe:{today:"Today","this-week":"This Week","this-month":"This Month","last-7":"Last 7 Days","last-30":"Last 30 Days","last-90":"Last 90 Days","this-year":"This Year","all-time":"All Time",custom:"Custom Range",from:"From",to:"To"},allUsers:"All Users",noUser:"No User (System)",filterByUser:"Filter by User"},maintenance:{title:"Maintenance",overview:"Overview",allOk:"All maintenance up to date",dueCount:"{{count}} item due",dueCount_plural:"{{count}} items due",warningCount:"{{count}} warning",warningCount_plural:"{{count}} warnings",totalPrintTime:"Total Print Time",nextMaintenance:"Next Maintenance",nothingDue:"Nothing due",tasks:"Tasks",lastPerformed:"Last performed",interval:"Interval",hoursRemaining:"{{hours}}h remaining",hoursOverdue:"{{hours}}h overdue",markDone:"Mark as Done",performMaintenance:"Perform Maintenance",history:"History",noHistory:"No maintenance history",editPrintHours:"Edit Print Hours",currentHours:"Current Hours",statusTab:"Status",settingsTab:"Settings",overdueCount:"{{count}} overdue",dueSoonCount:"{{count}} due soon",dueSoon:"Due soon",allGood:"All good",overdueBy:"Overdue by {{duration}}",dueIn:"Due in {{duration}}",timeLeft:"{{duration}} left",day:"1 day",days:"{{count}} days",week:"1 week",weeks:"{{count}} weeks",month:"1 month",months:"{{count}} months",year:"1 year",maintenanceTypes:"Maintenance Types",maintenanceTypesDescription:"System types and your custom maintenance tasks",addCustomType:"Add Custom Type",restoreDefaults:"Restore Default Tasks",intervalType:"Interval Type",intervalValue:"Interval ({{type}})",icon:"Icon",documentationLink:"Documentation Link (optional)",assignToPrinters:"Assign to Printers",selectAtLeastOnePrinter:"Select at least one printer",addType:"Add Type",custom:"Custom",printHours:"Print Hours",calendarDays:"Calendar Days",exampleName:"e.g., Replace HEPA Filter",viewDocumentation:"View documentation",timeBasedInterval:"Time-based interval",intervalOverrides:"Interval Overrides",intervalOverridesDescription:"Customize intervals for specific printers",assignedToPrinters:"Assigned to printers:",noPrintersAssigned:"No printers assigned",addPrinterShort:"Add:",printersAssignedClick:"{{count}} printer(s) assigned - click to manage",removeFromPrinter:"Remove from this printer",types:{lubricateCarbonRods:"Lubricate Carbon Rods",lubricateRails:"Lubricate Linear Rails",cleanNozzle:"Clean Nozzle/Hotend",checkBelts:"Check Belt Tension",cleanBuildPlate:"Clean Build Plate",checkExtruder:"Check Extruder Gears",checkCooling:"Check Cooling Fans",generalInspection:"General Inspection",cleanCarbonRods:"Clean Carbon Rods",lubricateSteelRods:"Lubricate Steel Rods",cleanSteelRods:"Clean Steel Rods",cleanLinearRails:"Clean Linear Rails",checkPtfeTube:"Check PTFE Tube",replaceHepaFilter:"Replace HEPA Filter",replaceCarbonFilter:"Replace Carbon Filter",lubricateLeftNozzleRail:"Lubricate Left Nozzle Rail"},maintenanceComplete:"Maintenance marked as complete",typeUpdated:"Maintenance type updated",typeDeleted:"Maintenance type deleted",defaultsRestored:"Restored {{count}} default task(s)",printHoursUpdated:"Print hours updated",printerAssigned:"Printer assigned",printerRemoved:"Printer removed",deleteTypeConfirm:'Delete "{{name}}"?',deleteSystemTypeTitle:"Delete default maintenance task?",deleteSystemTypeMessage:'Are you sure you want to delete the default maintenance task "{{name}}"?',noPermissionUpdate:"You do not have permission to update maintenance items",noPermissionPerform:"You do not have permission to perform maintenance",noPermissionEditTypes:"You do not have permission to edit maintenance types",noPermissionDeleteTypes:"You do not have permission to delete maintenance types",noPermissionEditHours:"You do not have permission to edit print hours",noPermissionRemovePrinter:"You do not have permission to remove printer assignments",noPermissionAssignPrinter:"You do not have permission to assign printers",noPermissionEditIntervals:"You do not have permission to edit intervals",configureSettings:"Configure maintenance types and intervals"},settings:{title:"Settings",general:"General",tabs:{general:"General",smartPlugs:"Smart Plugs",notifications:"Notifications",queue:"Workflow",filament:"Filament",network:"Network",apiKeys:"API Keys",virtualPrinter:"Virtual Printer",spoolbuddy:"SpoolBuddy",failureDetection:"Failure Detection",users:"Authentication",backup:"Backup",emailAuth:"Email Authentication",ldap:"LDAP",twoFa:"Two-Factor Auth",oidc:"SSO / OIDC",security:"Security"},spoolbuddy:{infoTitle:"SpoolBuddy devices",infoBody:"SpoolBuddy kiosks register themselves automatically via heartbeat. Unregister a device here if it is no longer in use or if a stale duplicate was left behind by a daemon crash.",duplicatesTitle:"{{count}} devices registered",duplicatesBody:"Only the first registered device is used by the kiosk UI. If one of these is a stale duplicate from a crash, unregister it — an online device will re-register itself on its next heartbeat.",empty:"No SpoolBuddy devices registered yet.",online:"Online",offline:"Offline",unregister:"Unregister",unregisterSuccess:"Device unregistered",unregisterError:"Failed to unregister device",confirmTitle:"Unregister SpoolBuddy device?",confirmBody:'This will remove "{{hostname}}" ({{deviceId}}) from the database. If the device is online, it will re-register itself on its next heartbeat.',ipAddress:"IP address",firmware:"Firmware",lastSeen:"Last seen",daemonUptime:"Daemon uptime",systemUptime:"System uptime",never:"never",nfc:"NFC",scale:"Scale",cpuTemp:"CPU temp",cpuLoad:"CPU load",memory:"Memory",disk:"Disk",update:"Update",updateConfirmTitle:"Update Spoolbuddy daemon?",updateConfirmBody:'Trigger a software update on "{{hostname}}"? The daemon will restart once the update is applied.',restartBrowser:"Restart Browser",restartBrowserConfirmTitle:"Restart kiosk browser?",restartBrowserConfirmBody:'Restart the kiosk browser on "{{hostname}}"? The display will blank briefly.',restartDaemon:"Restart Daemon",restartDaemonConfirmTitle:"Restart Spoolbuddy daemon?",restartDaemonConfirmBody:'Restart the Spoolbuddy daemon on "{{hostname}}"? The device will go offline for a few seconds.',reboot:"Reboot",rebootConfirmTitle:"Reboot device?",rebootConfirmBody:'Reboot "{{hostname}}"? The device will be offline for around a minute.',shutdown:"Shutdown",shutdownConfirmTitle:"Shutdown device?",shutdownConfirmBody:'Shutdown "{{hostname}}"? You will need physical access to power it back on.',commandConfirm:"Confirm",commandQueued:"Command queued",commandError:"Failed to send command"},ldap:{title:"LDAP Authentication",enabledDesc:"LDAP authentication is enabled",disabledDesc:"LDAP authentication is disabled",disabledHint:"Configure and save LDAP settings below, then enable.",enabled:"LDAP authentication enabled",disabled:"LDAP authentication disabled",feature1:"Users can login with LDAP credentials",feature2:"Local admin account remains as fallback",feature3:"LDAP groups are mapped to BamBuddy groups on login",serverConfig:"LDAP Server Configuration",serverUrl:"Server URL",serverUrlHint:"Use ldaps:// for SSL or ldap:// with StartTLS",security:"Security",securityHint:"StartTLS upgrades a plain connection to TLS. LDAPS uses TLS from the start.",bindDn:"Bind DN (Service Account)",bindPassword:"Bind Password",searchBase:"Search Base DN",userFilter:"User Search Filter",userFilterHint:"{username} is replaced with the login username. Use (uid={username}) for OpenLDAP.",advanced:"Advanced",autoProvision:"Auto-provision users",autoProvisionHint:"Automatically create a BamBuddy account on first LDAP login",defaultGroup:"Default group",defaultGroupNone:"— None (no fallback) —",defaultGroupHint:"Fallback group assigned when an LDAP user authenticates but is not listed in any mapped LDAP group. Leave empty to leave unmapped users without permissions.",groupMapping:"Group Mapping (JSON)",groupMappingHint:"Map LDAP group DNs to BamBuddy groups. Available groups: ",testConnection:"Test Connection",settingsSaved:"LDAP settings saved",errors:{serverRequired:"LDAP server URL is required",searchBaseRequired:"Search base DN is required",enableAuthFirst:"Enable authentication first",configureLdapFirst:"Save LDAP settings first"}},email:{smtpSettings:"SMTP Configuration",smtpHost:"SMTP Server",smtpPort:"SMTP Port",security:"Security",authentication:"Authentication",username:"Username",password:"Password",fromEmail:"From Email",fromName:"From Name",testConnection:"Test SMTP Connection",testRecipient:"Test Recipient Email",sendTest:"Send Test Email",sending:"Sending...",save:"Save Settings",saving:"Saving...",advancedAuth:"Advanced Authentication",advancedAuthEnabled:"Advanced Authentication is enabled",advancedAuthEnabledDesc:"Email-based user management features are active. New users will receive auto-generated passwords via email, and users can reset their passwords through the forgot password feature.",advancedAuthDisabled:"Advanced Authentication is disabled",advancedAuthDisabledDesc:"Enable advanced authentication to activate email-based features for user management.",enable:"Enable",disable:"Disable",feature1:"Passwords are auto-generated and emailed to new users",feature2:"Users can login with username or email",feature3:"Forgot password feature is available",feature4:"Admins can reset user passwords via email",errors:{requiredFields:"Please fill in all required fields",usernameRequired:"Username is required when authentication is enabled",enterTestEmail:"Please enter a test email address",smtpServerAndEmail:"Please fill in SMTP Server and From Email before testing",usernamePasswordRequired:"Username and Password are required when authentication is enabled",configureSmtpFirst:"Please configure and test SMTP settings first",enableAuthFirst:"Please enable authentication first to use email-based features."},success:{settingsSaved:"SMTP settings saved successfully"},securityOptions:{starttls:"STARTTLS (Port 587)",ssl:"SSL/TLS (Port 465)",none:"None (Port 25)"},authOptions:{enabled:"Enabled",disabled:"Disabled"}},appearance:"Appearance",notifications:"Notifications",smartPlugs:"Smart Plugs",spoolman:"Spoolman",updates:"Updates",language:"Language",languageDescription:"Select your preferred language",theme:"Theme",themeLight:"Light",themeDark:"Dark",themeSystem:"System",defaultView:"Default View",defaultViewDescription:"Page to show when opening the app",checkForUpdates:"Check for Updates",autoUpdate:"Auto Update",currentVersion:"Current Version",latestVersion:"Latest Version",upToDate:"You are up to date",updateAvailable:"Update available",notificationLanguage:"Notification Language",notificationLanguageDescription:"Language for push notifications",bedCooledThreshold:"Bed Cooled Threshold",bedCooledThresholdDescription:"Temperature below which the bed is considered cooled after a print",userNotificationsEnabled:"User Notifications",userNotificationsEnabledDescription:"Enable the user notifications menu and email notifications for print job events. Requires Advanced Authentication.",userNotificationsDisabledHint:"Enable Advanced Authentication to use user notifications.",notificationProviders:"Notification Providers",addProvider:"Add Provider",editProvider:"Edit Provider",providerType:"Provider Type",testNotification:"Test Notification",testSuccess:"Test notification sent successfully",testFailed:"Failed to send test notification",quietHours:"Quiet Hours",quietHoursDescription:"Do not disturb during these hours",quietHoursStart:"Start",quietHoursEnd:"End",events:{title:"Notification Events",printStart:"Print Started",printComplete:"Print Completed",printFailed:"Print Failed",printStopped:"Print Stopped",printProgress:"Progress Milestones",printProgressDescription:"Notify at 25%, 50%, 75%",printerOffline:"Printer Offline",printerError:"Printer Error",filamentLow:"Low Filament",maintenanceDue:"Maintenance Due",maintenanceDueDescription:"Notify when maintenance is needed"},smartPlug:{title:"Smart Plugs",add:"Add Smart Plug",edit:"Edit Smart Plug",name:"Name",ipAddress:"IP Address",linkedPrinter:"Linked Printer",autoOn:"Auto Power On",autoOnDescription:"Turn on when print starts",autoOff:"Auto Power Off",autoOffDescription:"Turn off after print completes",offDelay:"Off Delay",offDelayMinutes:"Minutes after print",offDelayTemp:"When nozzle below temperature",currentState:"Current State",turnOn:"Turn On",turnOff:"Turn Off"},filamentTracking:"Filament Tracking",filamentTrackingDesc:"Choose how to track your filament spools. You can use the built-in inventory or connect an external Spoolman server.",filamentChecks:"Filament checks",disableFilamentWarnings:"Disable filament warnings",disableFilamentWarningsDesc:"Don't show warnings about insufficient filament when printing or queueing",preferLowestFilament:"Prefer lowest remaining filament",preferLowestFilamentDesc:"When multiple spools match, use the one with the least filament remaining",trackingModeBuiltIn:"Built-in Inventory",trackingModeBuiltInDesc:"RFID auto-matching and usage tracking included",trackingModeSpoolmanDesc:"External filament management server",builtInFeatureRfid:"Automatically detects Bambu Lab RFID spools in AMS",builtInFeatureUsage:"Tracks filament consumption per print",builtInFeatureCatalog:"Manage spools, colors, and K-factor profiles",builtInFeatureThirdParty:"Third-party spools can be assigned to inventory spools",amsSyncButton:"Sync Weights from AMS",amsSyncTitle:"Sync Spool Weights from AMS",amsSyncMessage:"This will overwrite all inventory spool weights with the current AMS remain% values from connected printers. Use this to recover from corrupted weight data. Printers must be online.",amsSyncing:"Syncing...",amsSyncSuccess:"{{synced}} spool(s) synced, {{skipped}} skipped",amsSyncError:"Failed to sync weights from AMS",spoolmanAmsSyncButton:"Sync Spoolman Weights from AMS",spoolmanAmsSyncTitle:"Sync Spoolman Spool Weights from AMS",spoolmanAmsSyncMessage:"This will update all Spoolman spool weights based on the current AMS remain% values from connected printers. Printers must be online.",spoolmanAmsSyncing:"Syncing...",spoolmanAmsSyncSuccess:"{{synced}} spool(s) synced, {{skipped}} skipped",spoolmanAmsSyncError:"Failed to sync Spoolman weights from AMS",spoolmanAmsSyncErrorUnreachable:"Failed to sync Spoolman weights (Spoolman unreachable)",spoolmanAmsSyncErrorNotConfigured:"Failed to sync Spoolman weights (Spoolman not configured)",spoolmanNotConfigured:"Spoolman not configured",spoolmanFilamentCatalogTitle:"Spoolman Filament Catalog",spoolmanFilamentCatalogDesc:"Filament names and tare weights from your Spoolman instance. Name and spool weight are editable here; all other properties are managed directly in Spoolman.",spoolmanUrl:"Spoolman URL",spoolmanUrlHint:"URL of your Spoolman server (e.g., http://localhost:7912)",spoolmanConnected:"Connected",spoolmanDisconnected:"Disconnected",status:"Status",connect:"Connect",disconnect:"Disconnect",howSyncWorks:"How Sync Works",syncInfoRfidOnly:"Only official Bambu Lab spools with RFID are synced",syncInfoAutoCreate:"New spools are auto-created in Spoolman on first sync",syncInfoThirdPartySkipped:"Non-Bambu Lab spools (third-party, refilled) are skipped",linkingExistingSpools:"Linking Existing Spools",linkingExistingSpoolsDesc:'To link existing Spoolman spools to your AMS, hover over an AMS slot and click "Link to Spoolman".',syncMode:"Sync Mode",syncModeAuto:"Automatic",syncModeManual:"Manual Only",syncModeAutoDesc:"AMS data syncs automatically when changes are detected",syncModeManualDesc:"Only sync when manually triggered",syncAmsData:"Sync AMS Data",syncAmsDataDesc:"Manually sync printer AMS data to Spoolman",allPrinters:"All Printers",noDefaultPrinter:"No default (ask each time)",sidebarOrder:"Sidebar order",saveThumbnails:"Save thumbnails",captureFinishPhoto:"Capture finish photo",noPrintersConfigured:"No printers configured",archiveMode:{always:"Always create archive entry",never:"Never create archive entry",ask:"Ask each time"},checkForUpdatesLabel:"Check for updates",checkPrinterFirmware:"Check printer firmware",includeBetaUpdates:"Include beta versions",includeBetaUpdatesDesc:"Notify about beta and prerelease versions when checking for updates",enableRetry:"Enable retry",homeAssistantDescription:"Control smart plugs via Home Assistant",environmentManagedLabel:"(Environment Managed)",autoEnabledViaEnv:"Automatically enabled via environment variables",urlFromEnvReadOnly:"Value set by HA_URL environment variable (read-only)",tokenFromEnvReadOnly:"Value set by HA_TOKEN environment variable (read-only)",mqttConnectedTo:"Connected to",prometheusDescription:"Expose printer data in Prometheus format",noSmartPlugsTitle:"No smart plugs configured",noSmartPlugsDescription:"Add a Tasmota-based smart plug to track energy usage and automate power control.",noProvidersTitle:"No providers configured",noProvidersDescription:"Add a provider to receive alerts.",noTemplatesAvailable:"No templates available. Restart the backend to seed default templates.",apiPermissionView:"View printer status and queue",apiPermissionEdit:"Add and remove items from print queue",apiKeysEmptyTitle:"No API keys",apiKeysEmptyDescription:"Create an API key to integrate with external services.",noUsersFound:"No users found",noGroupsFound:"No groups found",noGroupsAvailable:"No groups available",passwordsDoNotMatch:"Passwords do not match",systemGroupWarning:"System group names cannot be changed",authDisabledTitle:"Authentication is Disabled",authDisabledFeature1:"Require login to access the system",authDisabledFeature2:"Create multiple users with group-based permissions",authDisabledFeature3:"Control access with 50+ granular permissions",userHasCreated:"This user has created:",userItemsQuestion:"What would you like to do with these items?",deleteUserConfirm:"Are you sure you want to delete this user?",actionCannotBeUndone:"This action cannot be undone.",addFirstSmartPlug:"Add Your First Smart Plug",providers:"Providers",log:"Log",testAll:"Test All",testResults:"Test Results",testPassedCount:"{{count}} passed",testFailedCount:"{{count}} failed",messageTemplates:"Message Templates",messageTemplatesDescription:"Customize notification messages for each event.",apiKeys:"API Keys",apiKeysDescription:"Create API keys for external integrations and webhooks.",createKey:"Create Key",apiKeyCreated:"API Key Created Successfully",apiKeyCopyWarning:"Copy this key now - it won't be shown again!",useInApiBrowser:"Use in API Browser",createNewApiKey:"Create New API Key",keyName:"Key Name",keyNamePlaceholder:"e.g., Home Assistant, OctoPrint",readStatus:"Read Status",readStatusDescription:"View printer status and queue",manageQueue:"Manage Queue",manageQueueDescription:"Add and remove items from print queue",controlPrinter:"Control Printer",controlPrinterDescription:"Pause, resume, and stop prints",manageLibrary:"Manage Library",manageLibraryDescription:"Upload, rename, and delete library files; import models from MakerWorld",manageInventory:"Manage Inventory",manageInventoryDescription:"Create, update, and delete spools and inventory records. Required for SpoolBuddy kiosks (NFC scan, scale readings, kiosk system commands).",libraryBadge:"Library",inventoryBadge:"Inventory",cloudAccess:"Allow cloud access",cloudAccessDescription:"Read Bambu Cloud presets and filaments on your behalf. Requires you to be signed into Bambu Cloud.",cloudBadge:"Cloud",updateEnergyCost:"Update electricity price",updateEnergyCostDescription:"Allow this key to POST a new per-kWh electricity price to /settings/electricity-price. Useful for Home Assistant dynamic-tariff automations (Tibber, Octopus, etc.). This is the only settings field writable via API key.",energyCostBadge:"Energy",legacyKey:"Legacy",legacyKeyTooltip:"Created before per-user ownership; recreate to use cloud access",unnamedKey:"Unnamed Key",lastUsed:"Last used",read:"Read",control:"Control",createFirstKey:"Create Your First Key",webhookEndpoints:"Webhook Endpoints",webhookApiKeyHint:"Use your API key in the X-API-Key header.",webhook:{getAllStatus:"Get all printer status",getSpecificStatus:"Get specific printer status",addToQueue:"Add to print queue",pausePrint:"Pause print",resumePrint:"Resume print",stopPrint:"Stop print"},apiBrowser:"API Browser",apiBrowserDescription:"Explore and test all available API endpoints.",apiKeyForTesting:"API Key for Testing",apiKeyPlaceholder:"Paste your API key here to test authenticated endpoints...",apiKeyHint:"This key will be sent as X-API-Key header with requests.",deleteApiKeyTitle:"Delete API Key",deleteApiKeyMessage:"Are you sure you want to delete this API key? Any integrations using this key will stop working.",deleteKey:"Delete Key",amsDisplayThresholds:"AMS Display Thresholds",amsThresholdsDescription:"Configure color thresholds for AMS humidity and temperature indicators.",humidity:"Humidity",goodGreen:"Good (green)",fairOrange:"Fair (orange)",aboveFairBad:"Above fair threshold shows as red (bad)",fairAlsoDryingThreshold:"This threshold is also used to trigger auto-drying when enabled",temperature:"Temperature",goodBlue:"Good (blue)",aboveFairHot:"Above fair threshold shows as red (hot)",historyRetention:"History Retention",keepSensorHistory:"Keep sensor history for",historyRetentionDescription:"Older humidity and temperature data will be automatically deleted",defaultPrintOptions:"Default Print Options",defaultPrintOptionsDescription:"Set default values for print options when starting new prints. These can be overridden per print in the print dialog.",defaultBedLevelling:"Bed Levelling",defaultBedLevellingDesc:"Auto-level bed before print",defaultFlowCali:"Flow Calibration",defaultFlowCaliDesc:"Calibrate extrusion flow",defaultVibrationCali:"Vibration Calibration",defaultVibrationCaliDesc:"Reduce ringing artifacts",defaultLayerInspect:"First Layer Inspection",defaultLayerInspectDesc:"AI inspection of first layer",defaultTimelapse:"Timelapse",defaultTimelapseDesc:"Record timelapse video",staggeredStart:"Staggered Start",staggeredStartDescription:"Default group size and interval when staggering multi-printer batch starts. Can be overridden per batch in the print modal.",plateClear:"Plate-Clear Confirmation",requirePlateClear:"Require plate-clear confirmation",requirePlateClearDescription:'When enabled, the scheduler waits for per-printer plate-clear confirmation before starting queued prints on printers with finished jobs. Disabling this also hides the plate status badge and the "Mark plate as cleared" button on printer cards.',gcodeInjection:"G-code Injection",gcodeInjectionDescription:'Configure custom G-code to inject at the start and/or end of prints for auto-print systems like Farmloop, SwapMod, AutoClear, and Printflow 3D. Snippets are configured per printer model and applied when "Inject G-code" is enabled on a queue item.',gcodeInjectionNoPrinters:"No printers found. Add printers to configure G-code snippets.",gcodeStartLabel:"Start G-code",gcodeEndLabel:"End G-code",gcodeStartPlaceholder:"G-code prepended before the print starts...",gcodeEndPlaceholder:"G-code appended after the print ends...",staggerGroupSize:"Group size",staggerGroupSizeHelp:"Printers to start simultaneously per group",staggerInterval:"Interval (minutes)",staggerIntervalHelp:"Delay between each group starting",queueDrying:"Queue Auto-Drying",queueDryingDescription:"Automatically dry AMS filament when printer is idle between queued prints. Uses humidity threshold above to trigger drying.",queueDryingEnabled:"Enable auto-drying",queueDryingEnabledDescription:"Start AMS drying automatically when printer is idle and humidity is above threshold",queueDryingBlock:"Wait for drying to complete",queueDryingBlockDescription:"Block the print queue until drying finishes. When off, prints take priority over drying.",ambientDryingEnabled:"Ambient drying",ambientDryingEnabledDescription:"Automatically dry filament on idle printers when humidity exceeds threshold, even without queued prints.",dryingPresets:"Drying Presets",dryingPresetsDescription:"Temperature and duration per filament type. AMS 2 Pro uses lower temps, AMS-HT supports higher temps.",dryingFilament:"Filament",printModal:"Print Modal",expandCustomMapping:"Expand custom mapping by default",expandCustomMappingDescription:"When printing to multiple printers, show per-printer AMS mapping expanded",authentication:"Authentication",authEnabledDescription:"Your instance is secured with user authentication",authDisabledDescription:"Enable to require login and manage user access",authDisabledMessage:"Enable authentication to create user accounts, manage permissions, and secure your Bambuddy instance.",enableAuthentication:"Enable Authentication",currentUser:"Current User",changePassword:"Change Password",admin:"Admin",users:"Users",addUser:"Add User",groups:"Groups",addGroup:"Add Group",system:"System",noDescription:"No description",userCount:"{{count}} users",permissionCount:"{{count}} permissions",createUser:"Create User",username:"Username",enterUsername:"Enter username",password:"Password",enterPassword:"Enter password",passwordRequirements:"At least 8 characters, with one uppercase, one lowercase, one digit, and one special character.",confirmPassword:"Confirm Password",confirmPasswordPlaceholder:"Confirm password",viewReleaseOnGitHub:"View release on GitHub",turnAllPlugsOn:"Turn all plugs on",turnAllPlugsOff:"Turn all plugs off",clearNotificationLogs:"Clear Notification Logs",clearLogsMessage:"This will permanently delete all notification logs older than 30 days. This action cannot be undone.",clearLogs:"Clear Logs",resetUiPreferences:"Reset UI Preferences",resetUiPreferencesMessage:"This will reset all UI preferences to defaults: sidebar order, theme, dashboard layout, view modes, and sorting preferences. Your printers, archives, and server settings will NOT be affected. The page will reload after clearing.",resetPreferences:"Reset Preferences",deleteGroupTitle:"Delete Group",deleteGroupMessage:"Are you sure you want to delete this group? Users in this group will lose these permissions.",deleteGroup:"Delete Group",disableAuthenticationTitle:"Disable Authentication",disableAuthenticationMessage:"Are you sure you want to disable authentication? This will make your Bambuddy instance accessible without login. All users will remain in the database but authentication will be disabled.",disableAuthentication:"Disable Authentication",configureBambuddy:"Configure Bambuddy",systemDefault:"System Default",archiveSettings:"Archive Settings",newWindow:"New Window",embeddedOverlay:"Embedded Overlay",preferredSlicer:"Preferred Slicer",preferredSlicerDescription:"Choose which slicer application to open files with",orcaslicerKnownIssuesWarning:"OrcaSlicer 2.3.2 / 2.4.0-dev have known CLI bugs that block slicing many Bambu-authored 3MFs — see upstream issues #12426 (segfault on painted multi-extruder files) and #13386 (parameter-range strict-validation reject). Bambu Studio is recommended until the upstream fixes land.",useSlicerApi:"Use Slicer API",useSlicerApiDescription:'When on, "Slice" actions open the in-app slicer modal and call the slicer-API sidecar. When off (default), they hand off to the desktop slicer via URI scheme.',slicerCard:"Slicer",orcaslicerApiUrl:"OrcaSlicer sidecar URL",bambuStudioApiUrl:"Bambu Studio sidecar URL",slicerApiUrlDescription:"URL of the slicer-API sidecar container. Leave blank to use the SLICER_API_URL / BAMBU_STUDIO_API_URL env var defaults.",slicerBundles:{title:"Slicer Bundles",description:'Import a Printer Preset Bundle (.bbscfg) exported from BambuStudio (File → Export → Export Preset Bundle → "Printer preset bundle"). Once imported, slice requests can pick presets from the bundle by name without re-uploading the JSON profile triplet.',uploadButton:"Upload bundle",uploading:"Uploading…",loading:"Loading bundles…",empty:"No bundles imported yet.",summary:"{{processCount}} process · {{filamentCount}} filament presets",delete:"Delete",uploadSuccess:"Imported {{name}}",uploadError:"Bundle upload failed: {{message}}",deleteSuccess:"Bundle removed",deleteError:"Bundle delete failed: {{message}}",confirmDeleteTitle:"Remove this bundle?",confirmDeleteMessage:'Slice requests that reference "{{name}}" will fail until the bundle is re-imported.'},externalCameras:"External Cameras",costTracking:"Cost Tracking",printsOnly:"Prints Only",totalConsumption:"Total Consumption",dataManagement:"Data Management",storageUsage:"Storage Usage",storageUsageDescription:"Breakdown of data usage by category",storageUsageTotal:"Total",storageUsageErrors:"Errors",storageUsageOtherBreakdown:"Other (includes static assets, scripts, and configuration files)",storageUsageSystem:"System",storageUsageData:"Data",storageUsageUnavailable:"Storage usage information unavailable",clearNotificationLogsDescription:"Delete notification logs older than 30 days",resetUiPreferencesDescription:"Reset sidebar order, theme, view modes, and layout preferences. Printers, archives, and settings are not affected.",enableHomeAssistant:"Enable Home Assistant",enableMqtt:"Enable MQTT",useTls:"Use TLS",enableMetricsEndpoint:"Enable Metrics Endpoint",availableMetrics:"Available Metrics",editUser:"Edit User",deleteUserTitle:"Delete User",groupName:"Group Name",leaveEmptyForAnonymous:"Leave empty for anonymous",leaveEmptyForNoAuth:"Leave empty for no authentication",enterNewPassword:"Enter new password",confirmNewPassword:"Confirm new password",enterGroupName:"Enter group name",enterDescriptionOptional:"Enter description (optional)",enterCurrentPassword:"Enter current password",enterNewPasswordMin6:"Enter new password (min 6 characters)",toast:{keyCopied:"Key copied to clipboard",copyFailed:"Failed to copy key",keyAddedToBrowser:"Key added to API Browser",clearLogsFailed:"Failed to clear logs",uiPreferencesReset:"UI preferences reset. Refreshing...",authDisabled:"Authentication disabled successfully",authDisableFailed:"Failed to disable authentication",apiKeyCreated:"API key created",apiKeyDeleted:"API key deleted",userCreated:"User created successfully",userUpdated:"User updated successfully",userDeleted:"User deleted successfully",groupCreated:"Group created successfully",groupUpdated:"Group updated successfully",groupDeleted:"Group deleted successfully",fillRequiredFields:"Please fill in all required fields",passwordsDoNotMatch:"Passwords do not match",passwordTooShort:"Password must be at least 8 characters",passwordNeedsUppercase:"Password must contain at least one uppercase letter",passwordNeedsLowercase:"Password must contain at least one lowercase letter",passwordNeedsDigit:"Password must contain at least one digit",passwordNeedsSpecial:"Password must contain at least one special character",enterGroupName:"Please enter a group name",settingsSaved:"Settings saved",noPermissionUpdate:"You do not have permission to change settings",cameraSettingsSaved:"Camera settings saved",enterCameraUrl:"Please enter a camera URL",passwordChanged:"Password changed successfully",connectionFailed:"Connection failed",testFailed:"Test failed",cameraConnected:"Camera connected{{resolution}}"},testConnection:"Test Connection",catalog:{spoolCatalog:"Spool Catalog",spoolCatalogDescription:"Empty spool weights by brand/type. Used for automatic weight lookup when adding spools.",searchCatalog:"Search catalog...",addNewEntry:"Add New Entry",namePlaceholder:"Name (e.g., Bambu Lab - Plastic)",weight:"Weight",type:"Type",default:"Default",custom:"Custom",noMatch:"No entries match your search",empty:"No entries in catalog",deleteEntry:"Delete Entry",deleteConfirm:'Are you sure you want to delete "{{name}}"?',resetCatalog:"Reset Catalog",resetConfirm:"Reset catalog to defaults? This will remove all custom entries.",loadFailed:"Failed to load spool catalog",nameWeightRequired:"Name and weight are required",entryAdded:"Entry added",addFailed:"Failed to add entry",entryUpdated:"Entry updated",updateFailed:"Failed to update entry",entryDeleted:"Entry deleted",deleteFailed:"Failed to delete entry",resetSuccess:"Catalog reset to defaults",resetFailed:"Failed to reset catalog",exported:"Exported {{count}} entries",imported:"Imported {{added}} entries ({{skipped}} skipped)",importFailed:"Failed to import: invalid JSON format",exportTooltip:"Export catalog to JSON",importTooltip:"Import catalog from JSON",resetTooltip:"Reset to defaults",selectedCount:"{{count}} selected",deleteSelected:"Delete Selected",bulkDeleteConfirm:"Are you sure you want to delete {{count}} entries?",bulkDeleted:"Deleted {{count}} entries",bulkDeleteFailed:"Failed to delete entries",material:"Material",spoolWeight:"Spool Weight",color:"Color",updateSpoolWeight:"Update Spool Weight",filamentUpdated:"Filament updated",filamentUpdateFailed:"Failed to update filament",filamentUpdateInvalid:"Invalid filament data",keepExistingSpoolWeight:"Keep old weight for existing spools",keepExistingSpoolWeightDesc:"Spools already created with this filament type retain the old tare weight. New spools use the updated value.",applyToAllSpools:"Apply to all spools",applyToAllSpoolsDesc:"All weight calculations for this filament type immediately use the new tare weight."},colorCatalog:{title:"Color Catalog",description:"Filament colors by manufacturer/material. Used for automatic color lookup when adding spools.",searchColors:"Search colors...",allManufacturers:"All manufacturers",addNewColor:"Add New Color",manufacturer:"Manufacturer",colorName:"Color Name",hex:"Hex",materialOptional:"Material (optional)",showing:"Showing {{filtered}} of {{total}} colors",noMatch:"No colors match your search",empty:"No colors in catalog",deleteColor:"Delete Color",deleteConfirm:'Are you sure you want to delete "{{name}}"?',resetCatalog:"Reset Color Catalog",resetConfirm:"Reset catalog to defaults? This will remove all custom colors.",sync:"Sync",starting:"Starting...",syncTooltip:"Sync from FilamentColors.xyz (2000+ colors, may take a minute)",loadFailed:"Failed to load color catalog",fieldsRequired:"Manufacturer, color name, and hex color are required",colorAdded:"Color added",addFailed:"Failed to add color",colorUpdated:"Color updated",updateFailed:"Failed to update color",colorDeleted:"Color deleted",deleteFailed:"Failed to delete color",resetSuccess:"Color catalog reset to defaults",resetFailed:"Failed to reset catalog",syncUpToDate:"Already up to date ({{count}} colors checked)",syncComplete:"Added {{added}} new colors ({{skipped}} already existed)",syncError:"Sync error",syncFailed:"Failed to sync from FilamentColors.xyz",exported:"Exported {{count}} colors",imported:"Imported {{added}} colors ({{skipped}} skipped)",importFailed:"Failed to import: invalid JSON format",selectedCount:"{{count}} selected",deleteSelected:"Delete Selected",bulkDeleteConfirm:"Are you sure you want to delete {{count}} colors?",bulkDeleted:"Deleted {{count}} colors",bulkDeleteFailed:"Failed to delete colors"},dateFormat:"Date Format",dateFormatUs:"US (MM/DD/YYYY)",dateFormatEu:"EU (DD/MM/YYYY)",dateFormatIso:"ISO (YYYY-MM-DD)",timeFormat:"Time Format",timeFormat12:"12-hour (3:30 PM)",timeFormat24:"24-hour (15:30)",defaultPrinter:"Default Printer",defaultPrinterDescription:"Pre-select this printer for uploads, reprints, and other operations.",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"Drag items in the sidebar to reorder. Reset to default order here.",setDefault:"Set Default",sidebarOrderSetDefaultHint:"Set default applies the current menu order to users who haven't customized theirs.",sidebarDefaultSet:"Default menu order has been set.",sidebarDefaultCleared:"Default menu order cleared.",sidebarDefaultFailed:"Failed to set default menu order.",reset:"Reset",darkMode:"Dark Mode",lightMode:"Light Mode",active:"(active)",background:"Background",accent:"Accent",style:"Style",bgNeutral:"Neutral",bgWarm:"Warm",bgCool:"Cool",bgOled:"OLED Black",bgSlate:"Slate Blue",bgForest:"Forest Green",accentGreen:"Green",accentTeal:"Teal",accentBlue:"Blue",accentOrange:"Orange",accentPurple:"Purple",accentRed:"Red",styleClassic:"Classic",styleGlow:"Glow",styleVibrant:"Vibrant",themeToggleHint:"Toggle between dark, light, and system mode using the icon in the sidebar.",autoArchivePrints:"Auto-archive prints",autoArchiveDescription:"Automatically save 3MF files when prints complete",saveThumbnailsDescription:"Extract and save preview images from 3MF files",captureFinishPhotoDescription:"Take a photo from printer camera when print completes. Bambuddy records a brief timelapse during the print so the photo can be sourced from the moment before the bed drops; the timelapse file is kept if you enabled timelapse for this print, otherwise it is deleted automatically after the photo is captured.",ffmpegNotInstalled:"ffmpeg not installed",ffmpegRequired:"Camera capture requires ffmpeg. Install it via <brew>brew install ffmpeg</brew> (macOS) or <apt>apt install ffmpeg</apt> (Linux).",camera:"Camera",cameraViewMode:"Camera View Mode",cameraOverlayDescription:"Camera opens in a resizable overlay on the main screen",cameraWindowDescription:"Camera opens in a separate browser window",externalCamerasDescription:"Configure external cameras to replace the built-in printer camera. Supports MJPEG streams, RTSP, HTTP snapshots, and USB cameras (V4L2). When enabled, the external camera is used for live view and finish photos.",cameraPlaceholderUsb:"Device path (/dev/video0)",cameraPlaceholderUrl:"Camera URL (rtsp://... or http://...)",cameraTypeMjpeg:"MJPEG Stream",cameraTypeRtsp:"RTSP Stream",cameraTypeSnapshot:"HTTP Snapshot",cameraTypeUsb:"USB Camera (V4L2)",cameraSnapshotUrl:"Snapshot URL (optional)",cameraSnapshotUrlPlaceholder:"http://192.168.1.61:1984/api/frame.jpeg?src=printer",cameraSnapshotUrlHelp:"Single-frame URL used for notification thumbnails, finish photos, layer-timelapse frames, and plate detection. Timelapse and plate detection each require their own per-printer toggle — this URL is just the image source they pull from when active. Leave blank to capture from the live stream above. Useful for go2rtc (/api/frame.jpeg) and IP cameras with a dedicated snapshot endpoint.",cameraRotation:"Rotation",test:"Test",connected:"Connected",disconnected:"Disconnected",currency:"Currency",defaultFilamentCost:"Default filament cost (per kg)",electricityCost:"Electricity cost per kWh",energyDisplayMode:"Energy display mode",energyModePrintDescription:"Dashboard shows sum of energy used during prints",energyModeTotalDescription:"Dashboard shows lifetime energy from smart plugs",fileManager:"File Manager",createArchiveEntry:"Create Archive Entry When Printing",createArchiveEntryDescription:"When printing from File Manager, optionally create an archive entry",lowDiskSpaceWarning:"Low Disk Space Warning",lowDiskSpaceDescription:"Show warning when free disk space falls below this threshold",printerFirmware:"Printer Firmware",checkFirmwareDescription:"Check for printer firmware updates from Bambu Lab",bambuddySoftware:"Bambuddy Software",autoCheckDescription:"Automatically check for new versions on startup",checkNow:"Check now",updateAvailableVersion:"Update available: v{{version}}",releaseNotes:"Release Notes",updateViaDocker:"Update via Docker Compose:",updateViaHomeAssistant:"Updates are managed by the Home Assistant Supervisor. Open Settings → Add-ons → Bambuddy in Home Assistant to install the new version.",installUpdate:"Install Update",latestVersionRunning:"You're running the latest version",failedToCheckUpdates:"Failed to check for updates: {{error}}",backupRestore:"Backup & Restore",backupRestoreDescription:"Export/import settings and configure GitHub backup",goToBackup:"Go to Backup",externalUrl:"External URL",externalUrlDescription:"The external URL where Bambuddy is accessible. Used for notification images and external integrations.",bambuddyUrl:"Bambuddy URL",externalUrlHint:"Include protocol and port (e.g., http://192.168.1.100:8000)",ftpRetry:"FTP Retry",ftpRetryDescription:"Retry FTP operations when printer WiFi is unreliable. Applies to 3MF downloads, print uploads, timelapse downloads, and firmware updates.",autoRetryDescription:"Automatically retry failed FTP operations",retryAttempts:"Retry attempts",retryDelay:"Retry delay",connectionTimeout:"Connection timeout",time_one:"{{count}} time",time_other:"{{count}} times",second_one:"{{count}} second",second_other:"{{count}} seconds",nSeconds:"{{count}} seconds",increaseForWeakWifi:"Increase for printers with weak WiFi",homeAssistant:"Home Assistant",homeAssistantFullDescription:"Connect to Home Assistant to control smart plugs via HA's REST API. Supports switch, light, input_boolean, and script entities.",homeAssistantUrl:"Home Assistant URL",longLivedAccessToken:"Long-Lived Access Token",haTokenHint:"Create a token in HA: Profile → Long-Lived Access Tokens → Create Token",connectionSuccessful:"Connection Successful",connectionFailed:"Connection Failed",haConnectionSuccess:"Successfully connected to Home Assistant.",haConnectionFailed:"Failed to connect to Home Assistant.",mqttPublishing:"MQTT Publishing",mqttDescription:"Publish BamBuddy events to an external MQTT broker for integration with Node-RED, Home Assistant, and other automation systems.",mqttEnableDescription:"Publish events to external MQTT broker",brokerHostname:"Broker hostname",port:"Port",usernameOptional:"Username (optional)",passwordOptional:"Password (optional)",topicPrefix:"Topic prefix",topicPrefixHint:"Topics will be: {{prefix}}/printers/<serial>/status, etc.",prometheusMetrics:"Prometheus Metrics",prometheusEndpointDescription:"Expose printer metrics at <code>/api/v1/metrics</code> for Prometheus/Grafana monitoring.",bearerTokenOptional:"Bearer Token (optional)",bearerTokenHint:"If set, requests must include <code>Authorization: Bearer <token></code>",metricsConnectionStatus:"Connection status",metricsPrinterState:"Printer state (idle/printing/etc)",metricsPrintProgress:"Print progress 0-100%",metricsBedTemp:"Bed temperature",metricsNozzleTemp:"Nozzle temperature",metricsPrintsTotal:"Total prints by result",metricsMore:"...and more (layers, fans, queue, filament usage)",smartPlugsDescription:"Connect smart plugs (Tasmota or Home Assistant) to automate power control and track energy usage for your printers.",allOn:"All On",allOff:"All Off",addSmartPlug:"Add Smart Plug",energySummary:"Energy Summary",currentPower:"Current Power",plugsOnline:"{{reachable}}/{{total}} plugs online",today:"Today",yesterday:"Yesterday",total:"Total",enablePlugsForSummary:"Enable plugs to see energy summary",addNotificationProvider:"Add",systemBadge:"(System)",creating:"Creating...",changing:"Changing...",deleteUserAndItems:"Delete user AND their items",deleteUserKeepItems:"Delete user, keep items (become ownerless)",ok:"OK",twoFa:{totpTitle:"Authenticator App (TOTP)",totpDesc:"Use an authenticator app like Google Authenticator, Aegis or Authy.",emailOtpTitle:"Email OTP",emailOtpDesc:"Send a one-time code to {{email}} when you log in.",emailOtpNoEmail:"Add an email address to your account to enable this method.",addEmailFirst:"Your account has no email address. Ask an admin to add one before enabling Email OTP.",setupTotp:"Set up Authenticator App",setupAuthApp:"Set up Authenticator App",setupInstructions:"Scan the QR code below with your authenticator app, then confirm with a code.",manualEntry:"Can't scan? Enter this secret manually:",scannedContinue:"I've scanned the code — continue",enterCodeToConfirm:"Enter the 6-digit code from your authenticator app to confirm setup.",activate:"Activate",disableTotp:"Disable Authenticator",disableConfirmHint:"Enter a valid TOTP code or a backup code to disable the authenticator.",totpDisabled:"Authenticator app disabled.",emailOtpEnabled:"Email OTP enabled.",emailOtpDisabled:"Email OTP disabled.",smtpRequired:"Please configure and test SMTP settings first.",invalidCode:"Invalid code. Please try again.",enableEmailOtp:"Enable Email OTP",disableEmailOtp:"Disable Email OTP",emailSetupEnterCode:"A verification code has been sent to your email address. Enter it below to confirm you own this inbox.",verifyAndEnable:"Verify & Enable",emailDisablePasswordHint:"Enter your account password to confirm disabling email OTP.",passwordPlaceholder:"Enter your password",backupCodesTitle:"Save your backup codes",backupCodesWarning:"Save these codes somewhere safe. Each code can only be used once and they will not be shown again.",backupCodesRemaining:"{{count}} backup codes remaining",savedCodes:"I've saved my codes",regenBackup:"Regenerate Backup Codes",regenBackupHint:"Enter your current TOTP code to generate 10 new backup codes. All existing backup codes will be invalidated.",newBackupCodes:"New backup codes",linkedAccounts:"Linked SSO Accounts",linkedAccountsDesc:"These external identity providers are linked to your account.",oidcUnlinked:"Account unlinked."},oidc:{title:"SSO / OIDC Providers",desc:"Configure OpenID Connect providers to allow single sign-on via external identity providers.",addProvider:"Add Provider",newProvider:"New Provider",empty:"No OIDC providers configured yet.",created:"Provider created.",updated:"Provider updated.",deleted:"Provider deleted.",refreshIcon:"Refresh icon",removeIcon:"Remove icon",iconRefreshed:"Icon refreshed.",iconRemoved:"Icon removed.",iconFetchFailed:"Icon could not be fetched from the provider URL.",deleteTitle:"Delete Provider",deleteMessage:'Delete "{{name}}"? All linked user accounts will be disconnected.',form:{name:"Display Name",issuerUrl:"Issuer URL",clientId:"Client ID",clientSecret:"Client Secret",scopes:"Scopes",iconUrl:"Icon URL (optional)",enabled:"Enabled",autoCreate:"Auto-create users",autoCreateDesc:"Automatically create a local account on first login.",autoLink:"Auto-link existing accounts",autoLinkDesc:"Link existing local accounts by matching email on first login.",secretHint:"leave blank to keep current",secretPlaceholder:"new secret",emailClaim:"Email Claim",emailClaimDesc:"JWT claim used as email identity. Use 'preferred_username' or 'upn' for Azure Entra ID (which does not send email_verified). Only use trusted claim names.",emailClaimPlaceholder:"email",emailClaimCustomClaimAutoLinkWarning:"Custom claims are safe for auto-link only when the value is tenant-administered (e.g. Azure Entra ID upn / preferred_username). Do not enable auto-link if your IdP allows users to self-assert this claim.",requireEmailVerified:"Require email verified",requireEmailVerifiedDesc:"Only accept the email claim when the provider marks it as verified.",requireEmailVerifiedWarning:"Warning: email will be accepted even without verification. Use only with trusted providers.",requireEmailVerifiedAutoLink:"Disable auto-link first to change this setting.",defaultGroup:"Default Group",defaultGroupDesc:"Group assigned to auto-created users. Falls back to Viewers if not set.",defaultGroupViewersFallback:"Viewers (default)"}},encryption:{title:"MFA Encryption Status",enabledFromEnv:"At-rest encryption enabled (key from MFA_ENCRYPTION_KEY environment variable)",enabledFromFile:"At-rest encryption enabled (key loaded from data directory)",enabledGenerated:"At-rest encryption enabled with auto-generated key",notConfigured:"At-rest encryption not configured",notConfiguredDesc:"TOTP secrets and OIDC client_secrets are stored in plaintext. Set MFA_ENCRYPTION_KEY or restart Bambuddy with a writable data directory to auto-generate one.",allEncrypted:"All MFA secrets are encrypted at rest.",legacyRowsLabel:"Legacy plaintext rows",encryptedRowsLabel:"Encrypted rows",legacyRowsWarning:"{{count}} legacy plaintext row(s) detected. Re-save the OIDC provider or re-enroll the user’s authenticator app to migrate to encrypted storage.",backupHint:"The auto-generated key is stored at DATA_DIR/.mfa_encryption_key and is included in local backup ZIPs. Keep your backups secure or set MFA_ENCRYPTION_KEY explicitly.",decryptionBrokenTitle:"Encryption key missing",decryptionBrokenError:"{{count}} encrypted record(s) cannot be decrypted because the encryption key is no longer available. Restore the previous MFA_ENCRYPTION_KEY or DATA_DIR/.mfa_encryption_key to recover.",migrationErrorWarning:"{{count}} legacy row(s) failed to re-encrypt at startup. Check server logs and restart Bambuddy to retry."}},notification:{printStarted:{title:"Print Started",body:"{{printer}}: {{filename}} has started printing"},printCompleted:{title:"Print Completed",body:"{{printer}}: {{filename}} completed successfully"},printFailed:{title:"Print Failed",body:"{{printer}}: {{filename}} has failed"},printStopped:{title:"Print Stopped",body:"{{printer}}: {{filename}} was stopped"},printProgress:{title:"Print Progress",body:"{{printer}}: {{filename}} is {{percent}}% complete"},printerOffline:{title:"Printer Offline",body:"{{printer}} is offline"},printerError:{title:"Printer Error",body:"{{printer}}: {{error}}"},filamentLow:{title:"Low Filament",body:"{{printer}}: Filament is running low"},maintenanceDue:{title:"Maintenance Due",body:"{{printer}}: {{items}} need attention"}},errors:{generic:"Something went wrong",networkError:"Network error. Please check your connection.",notFound:"Not found",unauthorized:"Unauthorized",serverError:"Server error",validationError:"Please check your input",printerConnectionFailed:"Failed to connect to printer",saveFailed:"Failed to save changes",deleteFailed:"Failed to delete",loadFailed:"Failed to load data"},hmsErrors:{title:"Errors - {{name}}",noErrors:"No errors",viewOnWiki:"View on Bambu Lab Wiki",clearInstructions:"Clear errors on the printer to dismiss them here.",clearErrors:"Clear Errors",clearSuccess:"HMS errors cleared",clearFailed:"Failed to clear HMS errors"},mqttDebug:{title:"MQTT Debug Log",searchPlaceholder:"Search topic or payload...",noMessages:"No messages logged yet",startLoggingHint:'Click "Start Logging" to begin capturing MQTT messages',noMessagesMatch:"No messages match your filter",adjustFilterHint:"Try adjusting your search or filter criteria",incoming:"Incoming",outgoing:"Outgoing",loggingStopped:"Logging stopped",loggingActive:"Logging active - messages will auto-refresh",startLogging:"Start Logging",stopLogging:"Stop Logging",clearLog:"Clear Log",topic:"Topic",timestamp:"Timestamp",direction:"Direction",all:"All"},printerFiles:{title:"File Manager",storageUsed:"Used:",storageFree:"Free:",filterPlaceholder:"Filter files...",deleteButton:"Delete",deleteFiles:"Delete {{count}} Files",deleteFileConfirm:'Delete "{{name}}"? This cannot be undone.',deleteFilesConfirm:"Delete {{count}} selected files? This cannot be undone.",noFiles:"No files on printer",loadingFiles:"Loading files...",failedToLoad:"Failed to load files",toast:{filesDeleted:"Deleted {{count}} file(s)",deleteFailed:"Delete failed: {{error}}"}},confirm:{delete:"Are you sure you want to delete this?",unsavedChanges:"You have unsaved changes. Are you sure you want to leave?",clearQueue:"Are you sure you want to clear the queue?"},login:{title:"Bambuddy Login",subtitle:"Sign in to your account",username:"Username",usernamePlaceholder:"Enter your username",usernameOrEmail:"Username or Email",usernameOrEmailPlaceholder:"Username or @ Email",password:"Password",passwordPlaceholder:"Enter your password",signIn:"Sign in",signingIn:"Logging in...",rememberMe:"Remember Me",forgotPassword:"Forgot your password?",loginSuccess:"Logged in successfully",loginFailed:"Login failed",enterCredentials:"Please enter username and password",enterEmail:"Please enter your email address",oidcLoginFailed:"OIDC login failed",oidcErrors:{providerError:"The identity provider returned an error",missingParameters:"OIDC callback is missing required parameters",invalidState:"OIDC state is invalid or has already been used",stateExpired:"OIDC login session expired — please try again",providerNotFound:"OIDC provider not found",discoveryFailed:"Failed to fetch OIDC discovery document",invalidDiscovery:"OIDC discovery document is invalid",networkError:"Network error during OIDC token exchange",badResponse:"Unexpected response during OIDC token exchange",noIdToken:"OIDC provider did not return an ID token",validationFailed:"OIDC token validation failed",nonceMismatch:"OIDC nonce mismatch — possible replay attack",missingSubClaim:"OIDC token is missing the sub claim",noLinkedAccount:"No local account is linked to this OIDC identity",accountInactive:"Your account is inactive",userResolutionFailed:"Failed to resolve your account",internalError:"An internal error occurred during OIDC login",tokenExchangeFailed:"OIDC token exchange failed"},forgotPasswordTitle:"Forgot Password",forgotPasswordMessage:"If you've forgotten your password, please contact your system administrator to reset it.",forgotPasswordEmailMessage:"Enter your email address and we'll send you a new password.",emailAddress:"Email Address",emailPlaceholder:"your.email@example.com",cancel:"Cancel",sending:"Sending...",sendResetEmail:"Send Reset Email",howToReset:"How to reset your password:",resetStep1:"Contact your Bambuddy administrator",resetStep2:"Ask them to reset your password in User Management",resetStep3:"They can set a new temporary password for you",resetStep4:"Log in with the new password and change it in Settings",gotIt:"Got it",resetPassword:{title:"Set New Password",subtitle:"Enter and confirm your new password below.",newPassword:"New Password",newPasswordPlaceholder:"At least 8 characters",confirmPassword:"Confirm Password",confirmPasswordPlaceholder:"Repeat new password",saving:"Saving…",submit:"Set New Password",backToLogin:"Back to login",passwordsDoNotMatch:"Passwords do not match",passwordTooShort:"Password must be at least 8 characters",resetFailed:"Password reset failed. The link may have expired."},twoFA:{title:"Two-Factor Authentication",subtitle:"Your account is protected with 2FA. Enter the verification code below.",methodAuthenticator:"Authenticator App",methodEmail:"Email Code",methodBackup:"Backup Code",instructionsTotp:"Open your authenticator app and enter the 6-digit code for Bambuddy.",instructionsEmail:"A 6-digit code has been sent to your email address. It expires in 10 minutes.",instructionsEmailNotSent:"Click the button below to receive a verification code via email.",instructionsBackup:"Enter one of your 8-character backup recovery codes. Each code can only be used once.",sendCodeButton:"Send Code via Email",sendingCode:"Sending...",resendCode:"Resend code",codeLabel:"Verification Code",backupCodeLabel:"Backup Code",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"Verify",verifyingButton:"Verifying...",backToLogin:"← Back to login",orContinueWith:"or continue with",signInWith:"Sign in with {{provider}}",enterCode:"Please enter the verification code",sendCodeFailed:"Failed to send verification code",invalidCode:"Invalid code. Please try again."}},setup:{title:"Bambuddy Setup",subtitle:"Configure authentication for your Bambuddy instance",enableAuth:"Enable Authentication",adminAccount:"Admin Account",adminAccountDesc:"If admin users already exist, authentication will be enabled using the existing admin accounts. Leave the fields below empty to use existing admins, or enter new credentials to create a new admin user.",adminUsername:"Admin Username",adminPassword:"Admin Password",optionalIfAdminExists:"(optional if admin users exist)",adminUsernamePlaceholder:"Enter admin username (optional)",adminPasswordPlaceholder:"Enter admin password (optional)",confirmPassword:"Confirm Password",confirmPasswordPlaceholder:"Confirm admin password",settingUp:"Setting up...",completeSetup:"Complete Setup",toast:{authEnabledAdminCreated:"Authentication enabled and admin user created",authEnabledExistingAdmins:"Authentication enabled using existing admin users",setupCompleted:"Setup completed",enterBothCredentials:"Please enter both admin username and password, or leave both empty to use existing admin users",passwordsDoNotMatch:"Passwords do not match",passwordTooShort:"Password must be at least 6 characters"}},changePassword:{title:"Change Password",currentPassword:"Current Password",currentPasswordPlaceholder:"Enter current password",newPassword:"New Password",newPasswordPlaceholder:"Enter new password (min 6 characters)",confirmPassword:"Confirm New Password",confirmPasswordPlaceholder:"Confirm new password",passwordsDoNotMatch:"Passwords do not match",passwordTooShort:"Password must be at least 6 characters",changing:"Changing...",success:"Password changed successfully",failed:"Failed to change password"},plateAlert:{title:"Print Paused!",message:"Objects detected on build plate. The print has been automatically paused. Please clear the plate and resume the print.",understand:"I Understand"},camera:{title:"Camera View",invalidPrinterId:"Invalid printer ID",live:"Live",snapshot:"Snapshot",restartStream:"Restart stream",refreshSnapshot:"Refresh snapshot",fullscreen:"Fullscreen",exitFullscreen:"Exit fullscreen",connectingToCamera:"Connecting to camera...",capturingSnapshot:"Capturing snapshot...",connectionLost:"Connection lost",connectionFailed:"Camera connection failed",reconnecting:"Reconnecting in {{countdown}}s... (attempt {{attempt}}/{{max}})",reconnectNow:"Reconnect now",cameraUnavailable:"Camera unavailable",cameraUnavailableDesc:"Make sure the printer is powered on and connected.",noCamera:"No camera available",retry:"Retry",cameraStream:"Camera stream",zoomOut:"Zoom out",zoomIn:"Zoom in",resetZoom:"Reset zoom",recording:"Recording",startRecording:"Start Recording",stopRecording:"Stop Recording",chamberLight:"Toggle chamber light",unavailable:"Camera unavailable",diagnose:{button:"Diagnose",modalTitle:"Camera diagnostic",running:"Running diagnostic...",runFailed:"Diagnostic could not run: {{error}}",retry:"Run again",stage:{tcp_reachable:"Network reachability",first_frame:"Frame capture",live_stream_active:"Live stream active"},summary:{all_ok:"Camera is working. The diagnostic completed all stages successfully.",live_stream_active_healthy:"Camera is currently streaming with recent frames — no test needed.",printer_unreachable:"Printer is not reachable. Check the IP address, network connection, and that the printer is powered on.",camera_port_closed:"Printer is reachable but the camera port is closed. Make sure LAN-only mode and Developer Mode are enabled in the printer settings.",no_frame:"Connected to the camera but no frames were received. Try again, or check that the camera is enabled in the printer settings.",unknown_failure:"Camera diagnostic failed for an unknown reason. Check the support log for details."},meta:{protocol:"Protocol",port:"Port",profile:"Profile"}}},groups:{title:"Group Management",subtitle:"Manage permission groups for access control",backToSettings:"Back to Settings",createGroup:"Create Group",noPermission:"You do not have permission to access this page.",system:"System",noDescription:"No description",usersCount:"{{count}} users",permissionsCount:"{{count}} permissions",edit:"Edit",delete:"Delete",toast:{created:"Group created successfully",updated:"Group updated successfully",deleted:"Group deleted successfully",enterGroupName:"Please enter a group name"},modal:{editGroup:"Edit Group",createGroup:"Create Group",cancel:"Cancel",saving:"Saving...",creating:"Creating...",saveChanges:"Save Changes"},form:{groupName:"Group Name",groupNamePlaceholder:"Enter group name",systemGroupWarning:"System group names cannot be changed",description:"Description",descriptionPlaceholder:"Enter description (optional)",permissions:"Permissions ({{count}} selected)"},deleteModal:{title:"Delete Group",message:"Are you sure you want to delete this group? Users in this group will lose these permissions.",confirm:"Delete Group"},editor:{title:"Edit Group",createTitle:"Create Group",search:"Search permissions...",selectAll:"Select All",clearAll:"Clear All",permissionsSelected:"{{count}} selected",noResults:"No permissions match your search"}},users:{title:"User Management",subtitle:"Manage users and their access to your Bambuddy instance",backToSettings:"Back to Settings",createUser:"Create User",noPermission:"You do not have permission to access this page.",admin:"Admin",noGroups:"No groups",active:"Active",inactive:"Inactive",edit:"Edit",delete:"Delete",system:"System",noGroupsAvailable:"No groups available",table:{username:"Username",groups:"Groups",status:"Status",actions:"Actions"},toast:{created:"User created successfully",updated:"User updated successfully",deleted:"User deleted successfully",fillRequired:"Please fill in all required fields",passwordsDoNotMatch:"Passwords do not match",passwordTooShort:"Password must be at least 6 characters",ldapProvisioned:'Provisioned LDAP user "{{username}}"'},modal:{createUser:"Create User",editUser:"Edit User",cancel:"Cancel",creating:"Creating...",saving:"Saving...",saveChanges:"Save Changes",advancedAuthSubtitle:"with Advanced Authentication",tabsAriaLabel:"User source",localTab:"Local",ldapTab:"LDAP",ldapSearchLabel:"Search directory",ldapSearchPlaceholder:"Type a username, name, or email...",ldapMinChars:"Type at least 2 characters to search",ldapTypeToSearch:"Start typing to search the LDAP directory",ldapSearching:"Searching directory...",ldapNoResults:"No matching users in the directory",ldapSearchError:"Directory search failed. Check the LDAP server status.",ldapAlreadyProvisioned:"Already provisioned",ldapSelectedLabel:"Selected",ldapProvision:"Provision user",ldapProvisioning:"Provisioning...",ldapErrorProvision:"Provisioning failed. Check the LDAP server status and try again."},form:{username:"Username",usernamePlaceholder:"Enter username",email:"Email",emailPlaceholder:"user@example.com",password:"Password",passwordPlaceholder:"Enter password",confirmPassword:"Confirm Password",confirmPasswordPlaceholder:"Confirm password",newPasswordPlaceholder:"Enter new password",confirmNewPasswordPlaceholder:"Confirm new password",leaveBlankToKeep:"leave blank to keep current",groups:"Groups",optional:"optional",autoGeneratedPassword:"A secure password will be automatically generated and emailed to the user.",passwordManagedByAdvancedAuth:'Password is managed by Advanced Authentication. Use "Reset Password" to send a new password to the user via email.',resetPassword:"Reset Password",resettingPassword:"Resetting Password..."},deleteModal:{title:"Delete User",message:"Are you sure you want to delete this user? This action cannot be undone.",confirm:"Delete User"}},streamOverlay:{title:"Stream Overlay",invalidPrinterId:"Invalid printer ID",cameraStream:"Camera stream",progress:"Progress",eta:"ETA",printerIdle:"Printer is idle",printerOffline:"Printer offline",status:{printing:"Printing",paused:"Paused",finished:"Finished",failed:"Failed",idle:"Idle",unknown:"Unknown"}},profiles:{title:"Profiles",subtitle:"Manage your slicer presets and pressure advance calibrations",tabs:{bambuCloud:"Bambu Cloud",orcaCloud:"Orca Cloud",local:"Local Profiles",kprofiles:"K-Profiles"},orcaCloud:{connectedAs:"Connected as",logout:"Disconnect",noLogoutPermission:"You do not have permission to disconnect",noConnectPermission:"You do not have permission to connect to Orca Cloud",retry:"Retry",back:"Use a different sign-in method",connect:{title:"Connect to Orca Cloud",description:"Sign in to your Orca Cloud account to sync your slicer profiles into Bambuddy."},providers:{google:"Sign in with Google",apple:"Sign in with Apple",github:"Sign in with GitHub",email:"Sign in with email and password"},password:{title:"Sign in with email and password",email:"Email",emailPlaceholder:"you@example.com",password:"Password",submit:"Sign in"},paste:{title:"Finish signing in",step1:"A new tab opened with the Orca Cloud sign-in page. Sign in with your Orca account.",step2:'Your browser will be redirected to a "localhost" URL that fails to load. That is expected — the URL is what we need.',step3:"Copy the entire URL from your browser's address bar and paste it below.",signInUrl:"If the sign-in tab did not open, click this URL:",label:"Paste the callback URL here",placeholder:"http://localhost:41172/callback?code=...&state=...",submit:"Finish connecting"},profiles:{title:"Your Orca Cloud profiles ({{count}})",refresh:"Refresh",empty:"No profiles found in your Orca Cloud account yet."},toast:{connected:"Connected to Orca Cloud as {{email}}",disconnected:"Disconnected from Orca Cloud"},errors:{startFailed:"Could not start the Orca Cloud sign-in flow.",finishFailed:"Could not finish the Orca Cloud sign-in.",passwordFailed:"Could not sign in with that email and password.",passwordEmpty:"Please enter both your email and password.",emptyPaste:"Please paste the callback URL from your browser.",noCode:"That URL does not look like an Orca Cloud callback (no code parameter). Copy the full URL from your address bar."}},localProfiles:{title:"Local Profiles",subtitle:"Import and manage slicer presets from OrcaSlicer",import:"Import Profiles",importDesc:"Drop .bbscfg, .bbsflmt, .orca_filament, .zip, or .json files here",importing:"Importing...",search:"Search local presets...",noPresets:"No local presets yet",noSearchResults:"No presets match your search",badge:"Local",edit:"Edit",delete:"Delete",cancel:"Cancel",deleteConfirmTitle:"Delete Preset",deleteConfirm:"Are you sure you want to delete this preset? This cannot be undone.",source:"Source",inheritsFrom:"Inherits",filamentType:"Type",vendor:"Vendor",compatiblePrinters:"Printers",nozzleTemp:"Nozzle Temp",cost:"Cost",density:"Density",pressureAdvance:"Pressure Advance",filament:"Filament",process:"Process",printer:"Printer",toast:{importSuccess:"{{count}} preset(s) imported",importSkipped:"{{count}} preset(s) skipped (duplicates)",importError:"{{count}} error(s) during import",deleted:"Preset deleted",updated:"Preset updated"}},connectedAs:"Connected as",logout:"Logout",noLogoutPermission:"You do not have permission to logout",failedToLoad:"Failed to load profiles",retry:"Retry",time:{justNow:"Just now",minsAgo:"{{count}}m ago",hoursAgo:"{{count}}h ago",daysAgo:"{{count}}d ago"},toast:{loggedOut:"Logged out"},login:{title:"Connect to Bambu Cloud",subtitle:"Sync your slicer presets across devices",email:"Email",password:"Password",region:"Region",regionGlobal:"Global",regionChina:"China",verificationCode:"Verification Code",totpCode:"Authenticator Code",checkEmail:"Check your email ({{email}}) for a 6-digit code",enterTotpHint:"Enter the 6-digit code from your authenticator app",accessToken:"Access Token",accessTokenHint:"Paste your Bambu Cloud access token. China-region accounts must use this path (phone-bound — email login unavailable). See the wiki for how to retrieve the token from MakerWorld cookies.",back:"Back",loginButton:"Login",verifyButton:"Verify",setTokenButton:"Set Token",useToken:"Use access token instead",useEmail:"Login with email instead",toast:{loggedIn:"Logged in successfully",codeSent:"Verification code sent to your email",enterTotp:"Enter code from your authenticator app",tokenSet:"Token set successfully"}},presets:{myPreset:"My preset (editable)",duplicate:"Duplicate",editable:"Editable",failedToLoadDetails:"Failed to load preset details",deleteConfirm:"Delete this preset?",deleteWarning:'This will permanently delete "{{name}}" from Bambu Cloud. This cannot be undone.',noDuplicatePermission:"You do not have permission to duplicate presets",noEditPermission:"You do not have permission to edit presets",noDeletePermission:"You do not have permission to delete presets",types:{filament:"Filament preset",printer:"Printer preset",process:"Process preset"},toast:{deleted:"Preset deleted",created:"Preset created",updated:"Preset updated",duplicated:"Preset duplicated",fieldAdded:'Field "{{key}}" added',exported:"Preset exported"},baseLabel:"Base: {{name}}",currentLabel:"Current: {{name}}",newPreset:"New Preset",editPreset:"Edit Preset",duplicatePreset:"Duplicate Preset",createNewPreset:"Create New Preset",customizeSettings:"Customize settings for your new preset",compareWithBase:"Compare with base preset",compare:"Compare",basePreset:"Base Preset",selectBasePreset:"Select base preset...",presetName:"Preset Name",myCustomPreset:"My custom preset",inheritsFrom:"Inherits from",dropJsonToImport:"Drop JSON to import",tabs:{common:"Common",allFields:"All Fields"},availableFields:"Available Fields",searchFieldsPlaceholder:"Search fields...",noMatchingFields:"No matching fields",allFieldsAdded:"All fields added",addCustomField:"Add custom field",yourOverrides:"Your Overrides",noOverridesYet:"No overrides yet",clickFieldsToAdd:"Click fields on the left to add them",saveAsTemplate:"Save as template",jsonTip:"Tip: Drag & drop a .json file anywhere on this modal to import settings"},cloudView:{searchPlaceholder:"Search presets...",templates:"Templates",refresh:"Refresh",newPreset:"New Preset",clearFilters:"Clear filters",compareMode:"Compare Mode",selectAnotherPreset:"Select another {{type}} preset",clickTwoPresets:"Click two presets of the same type to compare",selectFirst:"1. Select first",selectSecond:"2. Select second",compareNow:"Compare Now",lastSynced:"Last synced:",showingCount:"Showing {{showing}} of {{total}} presets",noPresetsFound:"No presets found",columns:{filament:"Filament",process:"Process",printer:"Printer"},noFilamentPresets:"No filament presets",noProcessPresets:"No process presets",noPrinterPresets:"No printer presets",filters:{type:"Type",owner:"Owner",printer:"Printer",nozzle:"Nozzle",filament:"Filament",layer:"Layer",all:"All",myPresets:"My Presets",builtIn:"Built-in",process:"Process"},noTemplatesPermission:"You do not have permission to manage templates",noRefreshPermission:"You do not have permission to refresh profiles",noCreatePermission:"You do not have permission to create presets"},templates:{title:"Quick Templates",noTemplates:"No templates yet",createFirst:"Create templates from the preset editor",typeFilter:"Type:",deleteTitle:"Delete Template",deleteWarning:"This action cannot be undone",deleteConfirm:'Are you sure you want to delete "{{name}}"?',namePlaceholder:"Template name",descriptionPlaceholder:"Description",settingsJson:"Settings (JSON)",fieldsCount:"{{count}} fields",shownInModals:"Shown in modals",hiddenInModals:"Hidden in modals",apply:"Apply",toast:{deleted:"Template deleted",updated:"Template updated",created:"Template created",applied:"Template applied"}}},support:{debugLoggingActive:"Debug logging is active",manageLogs:"Manage",collectItem7:"Printer connectivity and firmware versions",collectItem8:"Integration status (Spoolman, MQTT, HA)",collectItem9:"Network interfaces (subnets only)",collectItem10:"Python package versions",collectItem11:"Database health checks",collectItem12:"Docker environment details",bundleGenerating:"Generating bundle...",bundleStepConnection:"Running printer connectivity checks",bundleStepVirtualPrinters:"Running virtual-printer setup checks",bundleStepLogScan:"Scanning recent logs for known issues",bundleStepBuild:"Building the support bundle ZIP"},fileManager:{title:"File Manager",subtitle:"Organize and manage your print files",uploadFiles:"Upload Files",newFolder:"New Folder",folderName:"Folder Name",folderNamePlaceholder:"e.g., Functional Parts",renameFile:"Rename File",renameFolder:"Rename Folder",invalidFilenameChar:'The character "{{char}}" is not allowed in print filenames. The printer SD card rejects: < > : " / \\ | ? *',moveFiles:"Move {{count}} File(s)",rootNoFolder:"Root (No Folder)",current:"current",linkFolder:"Link Folder",linkFolderDescription:'Link "{{name}}" to a project or archive for quick access.',project:"Project",archive:"Archive",noProjectsFound:"No projects found",noArchivesFound:"No archives found",unlink:"Unlink",link:"Link",dragDropFiles:"Drag & drop files here",dropFilesHere:"Drop files here",orClickToBrowse:"or click to browse",allFileTypesSupported:"All file types supported. ZIP files will be extracted.",zipFilesDetected:"ZIP files detected",zipExtractOptions:"ZIP files will be extracted. Choose how to handle folder structure:",preserveZipStructure:"Preserve folder structure from ZIP",createFolderFromZip:"Create folder from ZIP filename",stlThumbnailGeneration:"STL thumbnail generation",zipMayContainStl:"ZIP files may contain STL files. Thumbnails can be generated during extraction.",thumbnailsCanBeGenerated:"Thumbnails can be generated for STL files. Large models may take longer to process.",generateThumbnailsForStl:"Generate thumbnails for STL files",threemfDetected:"3MF files detected",threemfExtractionInfo:"Printer model, material, color, and print settings will be automatically extracted from 3MF files.",willBeExtracted:"Will be extracted",filesExtracted:"{{count}} files extracted",uploadComplete:"Upload complete: {{succeeded}} succeeded",uploadFailed:"Upload failed",zipFilesFailed:"{{count}} files failed",uploading:"Uploading...",changeLink:"Change Link...",linkTo:"Link to...",linkToProjectOrArchive:"Link to project or archive",addToQueue:"Add to Queue",schedulePrint:"Schedule",generateThumbnail:"Generate Thumbnail",generateThumbnails:"Generate Thumbnails",generateThumbnailsForMissing:"Generate thumbnails for STL files missing them",gridView:"Grid view",listView:"List view",lowDiskSpaceWarning:"Low disk space warning",lowDiskSpaceDetails:"Only {{free}} free of {{total}} total. Threshold is set to {{threshold}} GB in settings.",files:"Files",folders:"Folders",size:"Size",free:"Free",allFiles:"All Files",allExternal:"External",externalIsEmpty:"No external files",externalEmptyDescription:"Files in your linked external folders will appear here.",wrap:"Wrap",enableTextWrapping:"Enable text wrapping",disableTextWrapping:"Disable text wrapping",collapse:"Collapse",collapseFoldersByDefault:"Collapse folders by default",expandFoldersByDefault:"Expand folders by default",dragToResizeTooltip:"Drag to resize, double-click to reset",searchFiles:"Search files...",allTypes:"All types",prints:"Prints",ascending:"Ascending",descending:"Descending",resultsCount:"{{showing}} of {{total}} files",selectAll:"Select All",deselectAll:"Deselect All",selected:"{{count}} selected",adding:"Adding...",loadingFiles:"Loading files...",folderIsEmpty:"Folder is empty",noFilesYet:"No files yet",folderEmptyDescription:"Upload files or move files into this folder to get started.",noFilesDescription:"Upload files to start organizing your print-related files.",noMatchingFiles:"No matching files",noMatchingFilesDescription:"No files match your current search or filter criteria.",clearFilters:"Clear filters",printedCount:"Printed {{count}}x",uploadedBy:"Uploaded By",deleteFolder:"Delete Folder",deleteFile:"Delete File",deleteFilesCount:"Delete {{count}} Files",deleteFolderConfirm:"Are you sure you want to delete this folder? All files inside will also be deleted.",deleteFileConfirm:"Are you sure you want to delete this file?",deleteFilesConfirm:"Are you sure you want to delete {{count}} selected files? This action cannot be undone.",deleting:"Deleting...",noPermissionRenameFolder:"You do not have permission to rename folders",noPermissionLinkFolder:"You do not have permission to link folders",noPermissionDeleteFolder:"You do not have permission to delete folders",noPermissionPrint:"You do not have permission to print",noPermissionAddToQueue:"You do not have permission to add to queue",noPermissionSlice:"You do not have permission to slice files",noPermissionDownload:"You do not have permission to download files",noPermissionRenameFile:"You do not have permission to rename this file",noPermissionGenerateThumbnail:"You do not have permission to generate thumbnails",noPermissionDeleteFile:"You do not have permission to delete this file",noPermissionCreateFolder:"You do not have permission to create folders",noPermissionUpload:"You do not have permission to upload files",noPermissionMoveFiles:"You do not have permission to move files",noPermissionDeleteFiles:"You do not have permission to delete files",linkExternal:"Link External",linkExternalFolder:"Link External Folder",linkExternalFolderDescription:"Mount a host directory (NAS, USB, network share) into the File Manager. Files are not copied — they are accessed directly from the original path.",externalFolderNamePlaceholder:"e.g., NAS Prints",externalPath:"Host Path",externalPathHelp:"Absolute path to the directory on the Docker host. Must be bind-mounted into the container.",readOnly:"Read Only",readOnlyHelp:"prevents uploads and deletions",showHiddenFiles:"Show hidden files (dotfiles)",externalFolder:"External Folder",scanFolder:"Scan",toast:{folderCreated:"Folder created",folderDeleted:"Folder deleted",fileDeleted:"File deleted",filesDeleted:"Deleted {{count}} files",filesMoved:"Files moved",folderLinked:"Folder linked",folderUnlinked:"Folder unlinked",externalFolderLinked:"External folder linked and scanned",folderScanned:"Scan complete: {{added}} added, {{removed}} removed",addedToQueue:"Added {{count}} file(s) to queue",addedToQueuePartial:"Added {{added}} file(s), {{failed}} failed",failedToAddToQueue:"Failed to add files: {{error}}",fileRenamed:"File renamed",folderRenamed:"Folder renamed",thumbnailsGenerated:"Generated {{count}} thumbnail(s)",thumbnailsGeneratedPartial:"Generated {{succeeded}} thumbnail(s), {{failed}} failed",noStlMissingThumbnails:"No STL files missing thumbnails",failedToGenerateThumbnails:"Failed to generate thumbnails: {{error}}",thumbnailGenerated:"Thumbnail generated",failedToGenerateThumbnail:"Failed to generate thumbnail: {{error}}"}},projects:{title:"Projects",subtitle:"Organize and track your 3D printing projects",newProject:"New Project",editProject:"Edit Project",deleteProject:"Delete Project",projectName:"Project Name",description:"Description",noProjects:"No projects yet",noProjectsFiltered:"No {{status}} projects",noProjectsFilteredHelp:"You don't have any {{status}} projects. Projects will appear here when their status changes.",createFirst:"Create your first project to start organizing related prints, tracking progress, and managing your builds.",createFirstButton:"Create Your First Project",create:"Create",files:"Files",prints:"Prints",plates:"plates",parts:"parts",lastModified:"Last Modified",deleteConfirm:"Are you sure you want to delete this project? Archives and queue items will be unlinked but not deleted.",addFiles:"Add Files",removeFile:"Remove File",viewDetails:"View Details",namePlaceholder:"e.g., Voron 2.4 Build",descriptionPlaceholder:"Optional description...",urlLabel:"URL",urlPlaceholder:"https://makerworld.com/...",urlInvalid:"URL must start with http:// or https://",openExternalUrl:"Open project URL",coverImageLabel:"Cover photo",coverImageAlt:"Project cover photo",coverImageUpload:"Upload",coverImageReplace:"Replace",coverImageRemove:"Remove",color:"Color",targetPlates:"Target Plates",targetPlatesPlaceholder:"e.g., 25",targetPlatesHelp:"Number of print jobs",targetParts:"Target Parts",targetPartsPlaceholder:"e.g., 150",targetPartsHelp:"Total objects needed",tagsLabel:"Tags (comma-separated)",tagsPlaceholder:"e.g., voron, functional, gift",dueDate:"Due Date",priority:"Priority",priorityLow:"Low",priorityNormal:"Normal",priorityHigh:"High",priorityUrgent:"Urgent",statusActive:"Active",statusCompleted:"Completed",statusArchived:"Archived",done:"Done",completed:"completed",failed:"failed",inQueue:"in queue",noPrintsYet:"No prints yet",printJobs:"Print jobs (plates)",partsPrinted:"Parts printed",failedParts:"Failed parts",import:"Import",export:"Export",importProject:"Import project",exportAll:"Export all projects",loading:"Loading projects...",noEditPermission:"You do not have permission to edit projects",noDeletePermission:"You do not have permission to delete projects",noCreatePermission:"You do not have permission to create projects",noImportPermission:"You do not have permission to import projects",noExportPermission:"You do not have permission to export projects",toast:{created:"Project created",updated:"Project updated",deleted:"Project deleted",imported:"Project imported",multipleImported:"{{count}} projects imported",importFailed:"Import failed",exported:"Projects exported (metadata only)"}},projectDetail:{notFound:"Project not found",backToProjects:"Back to Projects",export:"Export",exportProject:"Export project",noExportPermission:"You do not have permission to export projects",noEditPermission:"You do not have permission to edit projects",partOf:"Part of:",priorityLabel:"Priority:",noPrints:"No prints in this project yet",status:{active:"Active",completed:"Completed",archived:"Archived"},priority:{low:"Low",normal:"Normal",high:"High",urgent:"Urgent"},dueDate:{overdue:"Overdue",today:"Due today",daysLeft:"{{count}} days left"},progress:{platesProgress:"Plates Progress",partsProgress:"Parts Progress",printJobs:"print jobs",parts:"parts",percentComplete:"{{percent}}% complete",remaining:"{{count}} remaining"},stats:{printJobs:"Print Jobs",total:"total",failed:"{{count}} failed",partsPrinted:"{{count}} parts printed",printTime:"Print Time",filamentUsed:"Filament Used"},cost:{title:"Cost Tracking",filamentCost:"Filament Cost",energy:"Energy",totalCost:"Total Cost",total:"Total",includesBom:"incl. BOM",budget:"Budget",remaining:"Remaining"},subProjects:{title:"Sub-projects ({{count}})"},notes:{title:"Notes",noEditPermission:"You do not have permission to edit notes",placeholder:"Add notes about this project...",empty:"No notes yet. Click Edit to add notes."},files:{title:"Files",linkFolders:"Link folders from the File Manager",forQuickAccess:"to this project for quick access.",fileCount:"{{count}} file(s)",empty:"No folders linked. Go to File Manager and link a folder to this project.",noFiles:"No files in this folder.",print:"Print Now",addToQueue:"Add to Queue"},bom:{title:"Bill of Materials",acquired:"{{completed}}/{{total}} acquired",showAll:"Show all",hideDone:"Hide done",addPart:"Add Part",noAddPermission:"You do not have permission to add parts",partNamePlaceholder:"Part name (e.g., M3x8 screws)",partName:"Part name",qty:"Qty",price:"Price ({{currency}})",sourcingUrlPlaceholder:"Sourcing URL (optional)",remarksPlaceholder:"Remarks (optional)",deletePart:"Delete Part",deleteConfirm:'Are you sure you want to delete "{{name}}"?',noUpdatePermission:"You do not have permission to update parts",noEditPermission:"You do not have permission to edit parts",noDeletePermission:"You do not have permission to delete parts",totalCost:"Total cost:",empty:"No parts in the bill of materials. Add hardware, electronics, or other components to track what needs to be sourced."},timeline:{title:"Activity Timeline",empty:"No activity yet."},template:{saveAsTemplate:"Save as Template",noCreatePermission:"You do not have permission to create templates"},queue:{title:"Queue",viewAll:"View all",printing:"{{count}} printing",queued:"{{count}} queued"},prints:{title:"Prints ({{count}})"},toast:{projectUpdated:"Project updated",partAdded:"Part added",partRemoved:"Part removed",exportFailed:"Export failed",projectExported:"Project exported",templateCreated:"Template created"}},system:{title:"System Information",version:"Version",uptime:"Uptime",cpuUsage:"CPU Usage",memoryUsage:"Memory Usage",diskUsage:"Disk Usage",networkInfo:"Network Info",logs:"Logs",debugMode:"Debug Mode",enableDebug:"Enable Debug Logging",disableDebug:"Disable Debug Logging",downloadLogs:"Download Logs",clearLogs:"Clear Logs",dockerInfo:"Docker Info",containerName:"Container Name",imageName:"Image Name",platform:"Platform",architecture:"Architecture"},library:{title:"Filament Library",addFilament:"Add Filament",editFilament:"Edit Filament",deleteFilament:"Delete Filament",vendor:"Vendor",material:"Material",color:"Color",kFactor:"K Factor",temperature:"Temperature",noFilaments:"No filaments in library",deleteConfirm:"Are you sure you want to delete this filament?",importFromPrinter:"Import from Printer",exportToFile:"Export to File"},slice:{title:"Slice model",action:"Slice",actionAll:"Slice all {{count}} plates",actionAllTitle:"Slice every plate into one multi-plate output (single archive). Filament selection covers every slot the project defines.",allPlatesToggle:"Slice all {{count}} plates",slicing:"Slicing…",printer:"Printer profile",process:"Process profile",filament:"Filament profile",filamentSlot:"Filament {{index}} ({{type}})",selectPreset:"— Select a preset —",loadingPresets:"Loading presets…",analyzingPlateFilaments:"Analyzing plate filaments…",analyzingPlateFilamentsHint:"Running a preview slice to discover which AMS slots this plate uses. Cached after — re-opening is instant.",previewToast:"Analyzing {{name}} — {{elapsed}}",previewWithProgress:"Analyzing {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",notUsedByPlate:"— not used by this plate",noPresetsForSlot:"No presets available",otherPrinters:"Other printers",presetsLoadFailed:"Failed to load presets. Open Settings → Profiles to import them first.",refreshPresets:"Refresh",refreshPresetsTitle:"Refresh presets — fetch the latest cloud and bundled listings (use after deleting a preset in Bambu Studio or Bambu Handy)",allPresetsRequired:"All presets must be selected",bundle:"Slicer bundle",bundleNone:"— None (pick presets individually) —",bundleAllRequired:"Bundle process and every filament slot must be picked",enqueuing:"Submitting slice job…",queued:"Queued…",failed:"Slicing failed. Check the slicer sidecar logs.",startedToast:"Slicing {{name}} in the background…",queuedToast:"Queued: {{name}} — {{elapsed}}",runningToast:"Slicing {{name}} — {{elapsed}}",runningWithProgress:"{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",runningWithProgressMultiPlate:"Plate {{plateIndex}} of {{plateCount}} • {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",completedToast:"Sliced {{name}}",failedTitle:"Slicing failed",failedToast:"Slicing {{name}} failed: {{detail}}",tier:{local:"Imported",cloud:"Bambu Cloud",orcaCloud:"Orca Cloud",standard:"Standard"},cloud:{notAuthenticated:"Sign in to Bambu Cloud (Settings → Profiles → Bambu Cloud) to see your cloud presets.",expired:"Bambu Cloud session expired — sign in again to refresh your cloud presets.",unreachable:"Bambu Cloud is unreachable right now. Local and standard presets still work."},orcaCloud:{notAuthenticated:"Sign in to Orca Cloud (Profiles → Orca Cloud) to see your Orca presets.",expired:"Orca Cloud session expired — sign in again to refresh your Orca presets.",unreachable:"Orca Cloud is unreachable right now. Other presets still work."},bedType:{label:"Build plate",auto:"Auto (use process preset)",coolPlate:"Cool Plate",coolPlateSuperTack:"Cool Plate SuperTack",engineering:"Engineering Plate",highTemp:"High Temp Plate",texturedPEI:"Textured PEI Plate",smoothPEI:"Smooth PEI Plate"}},spoolman:{title:"Spoolman Integration",enabled:"Spoolman Enabled",url:"Spoolman URL",connected:"Connected",disconnected:"Not Connected",testConnection:"Test Connection",sync:"Sync",syncing:"Syncing...",lastSync:"Last Sync",linkToSpoolman:"Link to Spoolman",openInSpoolman:"Open in Spoolman",unlinkSpool:"Unlink Spool",unlinkConfirmTitle:"Unassign Spool?",unlinkConfirmMessage:"This will remove the spool from this slot. The spool data itself will remain unchanged.",selectSpool:"Select Spool",noUnlinkedSpools:"No unassigned spools available",linkSuccess:"Spool assigned successfully",linkFailed:"Failed to assign spool",unlinkSuccess:"Spool unassigned successfully",unlinkFailed:"Failed to unassign spool",linkedSpool:"Assigned spool",spoolId:"Spool ID",fillSourceLabel:"(Spoolman)",weight:"Weight",remaining:"Remaining",disableWeightSync:"Disable AMS Estimated Weight Sync",disableWeightSyncDesc:"Don't update remaining capacity from AMS estimates. Use this if you prefer Spoolman's usage tracking over AMS percentage-based estimates. New spools will still use the AMS estimate as their initial weight.",reportPartialUsage:"Report Partial Usage for Failed Prints",reportPartialUsageDesc:"When a print fails or is cancelled, report the estimated filament used up to that point based on layer progress."},inventory:{title:"Spool Inventory",subtitle:"Manage your spools",spoolmanMixedContentTitle:"Spoolman can't load over HTTPS — mixed-content blocked by your browser",spoolmanMixedContentBody:"Bambuddy is served over HTTPS (via your reverse proxy), but your Spoolman URL is still plain HTTP. Browsers block mixed content for security, so the embedded Spoolman UI can't render. Spoolman needs to be reachable over HTTPS for this to work.",spoolmanMixedContentFixReverseProxy:"Put Spoolman behind the same reverse proxy as Bambuddy (Traefik / Nginx / Caddy) with HTTPS, then update the Spoolman URL in Settings to the new HTTPS address.",spoolmanMixedContentFixOpenNewTab:"As a workaround, open Spoolman in a new browser tab over HTTP — mixed-content rules only apply to embedded frames, so a standalone tab still works.",spoolmanOpenInNewTab:"Open Spoolman in a new tab",labels:{title:"Print spool labels",selectedCount:"{{count}} selected",pickSpools:"Pick which spools to print labels for:",searchPlaceholder:"Search name, brand, or #ID",filterByMaterial:"Material:",allMaterials:"All",selectVisible:"Select all visible ({{count}})",deselectVisible:"Deselect visible",clearAll:"Clear all",noSpoolsToShow:"No spools to show. Adjust your filter and try again.",noMatches:"No spools match the current search or filter.",printOne:"Print label for this spool",printLabels:"Print labels…",bulkTitle:"Pick spools to print labels for from the {{count}} currently shown",noSpoolsTitle:"No spools to label",error:"Could not generate labels: {{msg}}",sortBy:{label:"Sort:",id:"By ID",color:"By colour"},templates:{amsHolderSmall:{label:"AMS holder — small (74 × 33 mm)",hint:"Single label per page; matches the printable label from MakerWorld model 752566 (AMS Filament Label Holder)."},amsHolderLarge:{label:"AMS holder — large (75 × 55 mm)",hint:"Single label per page; fits the cardstock-insert variant of the AMS Filament Label Holder. Roomy enough for swatch, brand, material, ID, and QR code."},box40x30:{label:"Box label (40 × 30 mm)",hint:"Single label per page; common DK/Brother roll size, good for filament-bag and storage-bin labels."},box:{label:"Box label (62 × 29 mm)",hint:"Single label per page; sized for Brother PT/QL and Dymo small labels."},averyL7160:{label:"Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)",hint:"EU sheet stock; 21 labels per A4 page."},avery5160:{label:"Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)",hint:"US sheet stock; 30 labels per Letter page."}}},addSpool:"Add Spool",editSpool:"Edit Spool",copySpool:"Copy Spool",material:"Material",selectMaterial:"Select material...",subtype:"Subtype",brand:"Brand",searchBrand:"Search brand...",useCustomBrand:'Use "{{brand}}"',useCustomMaterial:"Use custom material: {{material}}",colorName:"Color Name",colorNamePlaceholder:"Jade White, Fire Red...",color:"Color",hexColor:"Hex Color",pickColor:"Pick custom color",labelWeight:"Label Weight",coreWeight:"Empty Spool Weight",searchSpoolWeight:"Search spool weight...",weightUsed:"Used",currentWeight:"Remaining Weight",measuredWeight:"Measured Weight",spoolName:"Spool",costPerKg:"Cost per kg",storageLocation:"Storage Location",storageLocationPlaceholder:"e.g. Shelf A, Drawer 1",openInInventory:"Open in Inventory",measuredWeightError:"Measured weight must be between {{min}}g and {{max}}g.",slicerFilament:"Slicer Filament",slicerFilamentName:"Slicer Preset Name",slicerPreset:"Slicer Preset",searchPresets:"Search filament presets...",selectedPreset:"Selected",noPresetsFound:"No presets found",tempOverrides:"Temperature Overrides",note:"Note",notePlaceholder:"Any additional notes about this spool...",category:"Category",categoryPlaceholder:"e.g. Production, Prototype, Client A",categoryNone:"Uncategorized",storageLocationNone:"No location set",lowStockThresholdOverride:"Low-stock threshold (this spool)",lowStockThresholdOverrideHelp:"Leave blank to use the global threshold ({{global}}%).",clearRfid:"Clear RFID Tag",rfidCleared:"RFID tag cleared",archive:"Archive",restore:"Restore",noSpools:"No spools yet. Add your first spool to get started.",noAvailableSpools:"No spools available. Add a spool to your inventory or unassign one from another slot first.",kProfiles:"K-Profiles",addKProfile:"Add K-Profile",assignSpool:"Assign Spool",unassignSpool:"Unassign",assignSuccess:"Spool assigned and AMS slot configured",assignFailed:"Failed to assign spool",selectSpool:"Select a spool to assign to this slot",assigned:"Assigned",assigning:"Assigning...",searchSpools:"Search spools...",showAllSpools:"Show all spools",spoolmanSpools:"Spoolman Spools",allMaterials:"All Materials",filterByBrand:"Filter by brand...",showArchived:"Show archived",quickAdd:"Quick Add (Stock)",quantity:"Quantity",stock:"Stock",configured:"Configured",spoolsCreated:"{{count}} spools created",spoolsPartiallyCreated:"{{created}} of {{total}} spools created (some failed)",spoolCreated:"Spool created",spoolUpdated:"Spool updated",spoolDeleted:"Spool deleted",deepLinkSpoolNotFound:"Spool not found",deepLinkFetchFailed:"Could not load spool — try again",spoolArchived:"Spool archived",spoolRestored:"Spool restored",kProfileSaveFailed:"K-profile settings could not be saved",syncWeightSpoolNotFound:"Spool not found — it may have been deleted",syncWeightSpoolmanUnreachable:"Spoolman is unreachable — try again later",syncWeightFailed:"Failed to sync weight",spoolmanUnreachable:"Spoolman is not reachable — please try again later",deleteSpoolNotFound:"Spool not found — it may have already been deleted",deleteFailed:"Failed to delete spool",archiveSpoolNotFound:"Spool not found — it may have already been deleted",archiveFailed:"Failed to archive spool",restoreSpoolNotFound:"Spool not found — it may have already been deleted",restoreFailed:"Failed to restore spool",saveFailed:"Failed to save changes",tagClearFailed:"Failed to clear tag",deleteConfirm:"Are you sure you want to delete this spool? This cannot be undone.",archiveConfirm:"Are you sure you want to archive this spool?",advancedSettings:"Advanced Settings",filamentInfoTab:"Filament Info",paProfileTab:"PA Profile",filamentInfo:"Filament",additional:"Additional",loadingPresets:"Loading cloud presets...",cloudConnected:"Cloud connected",cloudNotConnected:"Cloud not connected (using defaults)",recentColors:"Recent",searchColors:"Search colors...",searchResults:"Search results",allColors:"All colors",commonColors:"Common colors",showLess:"Show less",showAll:"Show all",noColorsFound:"No colors match your search",noResults:"No matches found",extraColorsLabel:"Extra colors",extraColorsPlaceholder:"EC984C,#6CD4BC,A66EB9,D87694",extraColorsHint:"Paste 2 to 8 hex stops, separated by commas. Renders as a gradient.",extraColorsInvalid:"Ignored invalid hex: {{tokens}}",colorEffectLabel:"Effect",colorEffect:{none:"None",sparkle:"Sparkle",wood:"Wood",marble:"Marble",glow:"Glow",matte:"Matte",silk:"Silk",galaxy:"Galaxy",rainbow:"Rainbow",metal:"Metal",translucent:"Translucent",gradient:"Gradient",dualColor:"Dual Color",triColor:"Tri Color",multicolor:"Multicolor"},selectMaterialFirst:"Please select a material first in the Filament Info tab.",noPrintersConfigured:"No printers configured. Add printers to use PA profiles.",matchingFilter:"Matching",anyBrand:"Any brand",anyVariant:"Any variant",autoSelect:"Auto-select",matches:"matches",match:"match",noMatches:"No matches",connected:"Connected",offline:"Offline",printerOffline:"Printer is offline. Connect to view calibration profiles.",noKProfilesMatch:"No K-profiles match the selected filament.",leftNozzle:"Left Nozzle",rightNozzle:"Right Nozzle",profilesSelected:"calibration profile(s) selected",totalInventory:"Total Inventory",totalConsumed:"Total Consumed",byMaterial:"By Material",inPrinter:"In Printer",lowStock:"Low Stock",sinceTracking:"Since tracking started",resetConsumedCounter:"Reset counter",resetConsumedCounterTooltip:"Zero the consumed-grams counter for this spool. Remaining weight is not changed.",resetConsumedCounterConfirm:"Reset this spool's consumed-grams counter to 0? Future prints will track from zero again. The spool itself, its remaining weight calculation, and your settings are not changed.",resetAllConsumedCounters:"Reset all counters",resetAllConsumedCountersTooltip:"Zero the consumed-grams counter on every spool. Remaining weights are not changed.",resetAllConsumedCountersConfirm:'Reset the consumed-grams counter to 0 on all {{count}} spools (archived ones included)? This clears the "Total Consumed" stat so future prints track from zero. Spools and remaining weights are not changed.',consumedCounterReset:"Counter reset",allConsumedCountersReset:"Counter reset for {{count}} spool(s)",resetConsumedCounterFailed:"Failed to reset counter",loadedInAms:"Loaded in AMS/Ext",remaining:"Remaining",weightCheck:"Weight Check",lastWeighed:"Last weighed",neverWeighed:"Never weighed",search:"Search spools...",showing:"Showing",to:"to",of:"of",show:"Show",spools:"spools",spool:"spool",page:"Page",noSpoolsMatch:"No results found",noSpoolsMatchDesc:"Try adjusting your search or filters to find what you're looking for.",active:"Active",archived:"Archived",all:"All",used:"Used",new:"New",clearFilters:"Clear filters",table:"Table",cards:"Cards",net:"Net",groupSimilar:"Group",groupedSpools:"{{count}} identical spools",groupedRows:"rows",columns:"Columns",configureColumns:"Configure Columns",configureColumnsDesc:"Drag to reorder columns or use arrows. Toggle visibility with the eye icon.",visible:"visible",reset:"Reset",cancel:"Cancel",applyChanges:"Apply Changes",moveUp:"Move up",moveDown:"Move down",hideColumn:"Hide column",showColumn:"Show column",linkToSpool:"Link to Spool",tagLinked:"Tag linked to spool",tagLinkFailed:"Failed to link tag",tagAlreadyLinked:"Tag already linked to another spool",unknownTag:"Unknown RFID tag detected",usageHistory:"Usage History",noUsageHistory:"No usage recorded yet",printName:"Print Name",weightConsumed:"Weight Consumed",clearHistory:"Clear",historyCleared:"Usage history cleared",fillSourceLabel:"(Inv)",lowStockThresholdError:"Threshold must be between 0.1 and 99.9",assignMismatchTitle:"Material mismatch",assignMismatchMessage:'The selected spool material "{{spoolMaterial}}" does not match the tray material "{{trayMaterial}}" for {{location}}. Assign anyway?',assignMismatchConfirm:"Assign Anyway",assignPartialMismatchMessage:'The spool material "{{spoolMaterial}}" is similar to but not exactly matching "{{trayMaterial}}" in {{location}}. Do you want to proceed?',assignProfileMismatchMessage:'The spool profile "{{spoolProfile}}" does not match the tray profile "{{trayProfile}}" in {{location}}. Do you want to proceed?',assignReconfigureNote:"The AMS slot will be reconfigured to use the spool's profile.",spoolmanFilamentCatalog:"Spoolman Filament Catalog",pickFromSpoolmanCatalog:"Pick from Spoolman catalog…",spoolmanFilamentSelected:"Filament selected from Spoolman catalog",spoolmanFilamentUnlinked:"Filament catalog link cleared",noSpoolmanFilaments:"No filaments found in Spoolman catalog",spoolmanFilamentColorSwatch:"Filament color",spoolWeightManagedBySpoolman:"Empty spool weight is managed per filament type in Spoolman",spoolmanCatalogLoadFailed:"Failed to load Spoolman filament catalog"},timelapse:{title:"Timelapse",create:"Create Timelapse",download:"Download",delete:"Delete",preview:"Preview",frameRate:"Frame Rate",quality:"Quality",processing:"Processing...",noTimelapses:"No timelapses available"},ams:{title:"AMS",slot:"Slot",empty:"Empty",emptySlot:"Empty slot",slotEmpty:"Empty",emptySlotReset:"No filament assigned",unknown:"Unknown",humidity:"Humidity",temperature:"Temperature",filamentType:"Filament Type",filamentColor:"Color",remaining:"Remaining",history:"AMS History",noHistory:"No history available",configureSlot:"Configure Slot",externalSpool:"External Spool",profile:"Profile",kFactor:"K Factor",fill:"Fill",configure:"Configure",used:"used",remainingUnit:"remaining"},printModal:{title:"Start Print",selectPrinter:"Select Printer",selectPlate:"Select Plate",filamentMapping:"Filament Mapping",totalCost:"Total cost:",slotRemainingShort:" - {{grams}}g left",printSettings:"Print Settings",bedLeveling:"Bed Leveling",flowCalibration:"Flow Calibration",vibrationCalibration:"Vibration Calibration",layerInspection:"First Layer Inspection",timelapse:"Timelapse",startPrint:"Start Print",addToQueue:"Add to Queue",cancel:"Cancel",noPrintersAvailable:"No printers available",printerBusy:"Printer is busy",printerOffline:"Printer is offline",sameTypeDifferentColor:"Same type, different color",filamentTypeNotLoaded:"Filament type not loaded",openCalendar:"Open calendar",leftNozzle:"L",rightNozzle:"R",leftNozzleTooltip:"Left nozzle",rightNozzleTooltip:"Right nozzle",filamentOverride:"Filament Override",filamentOverrideHint:"Optionally override filaments for model-based assignment. The scheduler will match against your selected filaments instead of the original 3MF values.",originalFilament:"Original",overrideWith:"Override with",resetToOriginal:"Reset to original",insufficientFilamentTitle:"Not enough filament",insufficientFilamentMessage:"Some assigned spools have less filament remaining than this print needs:",insufficientFilamentLine:"{{printer}} - {{slot}}: needs {{required}}g, remaining {{remaining}}g",printAnyway:"Print anyway",forceColorMatch:"Force color match",staggerPrinterStarts:"Stagger printer starts",staggerGroupSize:"Group size",staggerInterval:"Interval (min)",staggerPreview:"{{printers}} printers → {{groups}} groups of {{size}}, starting every {{interval}} min",staggerLastGroup:"last group: {{count}}",staggerTotal:"total: {{minutes}} min",staggerToPrinters:"Stagger to {{count}} printers",gcodeInjection:"Inject auto-print G-code"},backup:{includesEncryptionKey:"Local backups include the MFA encryption key file (DATA_DIR/.mfa_encryption_key) so a backup ZIP is self-contained. Treat the ZIP as sensitive — anyone with the file can decrypt the OIDC client secrets and TOTP secrets stored inside.",title:"Backup & Restore",createBackup:"Create Backup",restoreBackup:"Restore Backup",restoreDescription:"Replace all data from a backup file",downloadBackup:"Download Backup",uploadBackup:"Upload Backup",lastBackup:"Last Backup",autoBackup:"Auto Backup",backupNow:"Backup Now",restoreWarning:"Warning: Restoring a backup will overwrite all current data.",includeArchives:"Include Archives",includeSettings:"Include Settings",includeProfiles:"Include Profiles",backupSuccess:"Backup created successfully",restoreSuccess:"Backup restored successfully",backupFailed:"Backup failed",restoreFailed:"Restore failed",restoreNote:"Virtual Printer will be stopped during restore",githubBackup:"Git Backup",enabled:"Enabled",cloudLoginRequired:"Bambu Cloud login required. Sign in under Profiles → Cloud Profiles to enable GitHub backup.",cloudLoginRequiredShort:"Cloud login required",githubDescription:"Automatically sync your profiles to a private GitHub repository for backup and version history.",repoIsPrivate:"Repository is private — safe to back up to.",repoIsPublicWarning:"Repository is PUBLIC. Bambuddy backups include MQTT credentials, Home Assistant tokens, Prometheus tokens, your Bambu Cloud email, and printer access codes via K-profiles. Saving is blocked until you make the repository private in your provider's settings.",repoVisibilityUnknown:"Could not determine repository visibility. Bambuddy refuses to back up to anything not confirmed private; saving will be blocked.",repositoryUrl:"Repository URL",repoUrlPlaceholderGitHub:"https://github.com/username/repo-name",repoUrlPlaceholderGitea:"https://gitea.example.com/username/repo-name",repoUrlPlaceholderForgejo:"https://forgejo.example.com/username/repo-name",repoUrlPlaceholderGitLab:"https://gitlab.com/username/repo-name",allowInsecureHttp:"Allow insecure HTTP",allowInsecureHttpHint:"Enable for self-hosted instances on private networks without TLS",personalAccessToken:"Personal Access Token",tokenSaved:"(saved)",enterNewToken:"Enter new token to update",tokenHint:"Fine-grained token with Contents read/write permission",branch:"Branch",provider:"Git Provider",providerGitHub:"GitHub",providerGitLab:"GitLab",providerGitea:"Gitea",providerForgejo:"Forgejo",manualOnly:"Manual only",hourly:"Hourly",daily:"Daily",weekly:"Weekly",includeInBackup:"Include in backup",kProfiles:"K-Profiles",kProfilesDescription:"Pressure advance calibration from connected printers",noPrintersConnected:"No printers connected",printersConnected:"{{connected}}/{{total}} connected",cloudProfiles:"Cloud Profiles",cloudProfilesDescription:"Filament, printer, and process presets from Bambu Cloud",appSettings:"App Settings",appSettingsDescription:"Bambuddy configuration (complete database)",spoolInventory:"Spool Inventory",spoolInventoryDescription:"Filament spools, usage history, and cost tracking",printArchives:"Print Archives",printArchivesDescription:"Print history metadata (no gcode/3MF files)",lastBackupAt:"Last backup:",noBackupsYet:"No backups yet",next:"Next:",startingBackup:"Starting backup...",test:"Test",enableBackup:"Enable Backup",testConnection:"Test Connection",enterRepoUrl:"Enter repository URL",enterRepoAndToken:"Enter repository URL and access token",repoRequired:"Repository URL is required",tokenRequired:"Access token is required",githubBackupEnabled:"GitHub backup enabled",tokenUpdated:"Token updated",settingsSaved:"Settings saved",failedToSave:"Failed to save: {{message}}",backupCompleteFiles:"Backup complete - {{count}} files updated",backupSkippedNoChanges:"Backup skipped - no changes",backupFailed2:"Backup failed: {{message}}",clearedLogs:"Cleared {{count}} logs",failedToClearLogs:"Failed to clear logs: {{message}}",history:"History",clear:"Clear",date:"Date",status:"Status",commit:"Commit",localBackup:"Local Backup",localBackupDescription:"Create a complete backup of your Bambuddy data including the database, archives, uploads, and all files.",downloadBackupLabel:"Download Backup",completeBackupZip:"Complete backup: database + all files (ZIP)",download:"Download",preparingBackup:"Preparing backup...",creatingArchive:"Creating backup archive... This may take a while for large archives.",downloadingFile:"Downloading backup file...",backupDownloaded:"Backup downloaded successfully",failedToCreateBackup:"Failed to create backup: {{message}}",restore:"Restore",restoreReplacesAll:"Restore replaces all data.",restoreReplacesAllDetail:"Your current database and files will be completely replaced. A restart is required after restore.",restoreConfirmTitle:"Restore Backup",restoreConfirmMessage:'Are you sure you want to restore from "{{filename}}"? This will completely replace your current database and all files. The application will need to be restarted after restore.',restoreConfirmButton:"Restore Backup",uploadingFile:"Uploading backup file...",backupRestoredRestart:"Backup restored. Please restart Bambuddy.",failedToRestore:"Failed to restore backup. Please check the file format.",reloadNow:"Reload Now",creatingBackup:"Creating Backup",restoringBackup:"Restoring Backup",preparing:"Preparing...",processing:"Processing...",doNotClosePage:"Please do not close this page or navigate away. This operation may take several minutes for large backups.",restoring:"Restoring...",restoreComplete:"Restore Complete",restoreFailed2:"Restore Failed",importSettings:"Import settings from a backup file",pleaseWaitRestoring:"Please wait while your data is being restored",selectBackupFile:"Click to select backup file (.json or .zip)",duplicateHandling:"How duplicate handling works:",matchPrinters:"Printers",matchPrintersBy:"matched by serial number",matchSmartPlugs:"Smart Plugs",matchSmartPlugsBy:"matched by IP address",matchNotificationProviders:"Notification Providers",matchNotificationProvidersBy:"matched by name",matchFilaments:"Filaments",matchFilamentsBy:"matched by name + type + brand",matchArchives:"Archives",matchArchivesBy:"matched by content hash (always skipped)",matchPendingUploads:"Pending Uploads",matchPendingUploadsBy:"matched by filename",matchSettingsTemplates:"Settings & Templates",matchSettingsTemplatesBy:"always overwritten",replaceExisting:"Replace existing data",keepExisting:"Keep existing data",overwriteDescription:"Overwrite items that already exist with backup data",keepDescription:"Only restore items that don't already exist",overwriteCaution:"Caution:",overwriteWarning:"Overwriting will replace your current configurations with data from the backup. Printer access codes are never overwritten for security.",cancel:"Cancel",processingBackup:"Processing backup file...",itemsRestored:"Items Restored",itemsSkipped:"Items Skipped",restored:"Restored",skippedAlreadyExist:"Skipped (already exist)",filesCategory:"Files (3MF, thumbnails, etc.)",andMore:"...and {{count}} more",newApiKeysGenerated:"New API Keys Generated",keysShownOnce:"These keys are only shown once. Copy them now!",copy:"Copy",noDataFound:"No data was found to restore in the backup file.",close:"Close",scheduledBackup:"Scheduled Backups",scheduledBackupDescription:"Automatically create backup snapshots on a schedule. Output directory can be mounted to a NAS or external storage.",frequency:"Frequency",backupTime:"Time",retention:"Retention",retentionDescription:"Number of backups to keep",outputPath:"Output Path",outputPathPlaceholder:"Default: {{path}}",outputPathDescription:"Leave empty for default location",runNow:"Run Now",backupFiles:"Backup Files",noScheduledBackups:"No backups yet",deleteBackup:"Delete",deleteBackupConfirm:"Delete this backup file?",backupRunning:"Backup in progress...",scheduledBackupComplete:"Backup completed successfully",scheduledBackupFailed:"Backup failed",nextBackup:"Next backup",backupSize:"Size",localTimeHint:"Local time ({{tz}})",defaultPathLabel:"Default:",categories:{settings:"Settings",notification_providers:"Notification Providers",notification_templates:"Notification Templates",smart_plugs:"Smart Plugs",printers:"Printers",filaments:"Filaments",maintenance_types:"Maintenance Types",archives:"Archives",projects:"Projects",pending_uploads:"Pending Uploads",external_links:"External Links",api_keys:"API Keys"}},tags:{title:"Tags",addTag:"Add Tag",editTag:"Edit Tag",deleteTag:"Delete Tag",tagName:"Tag Name",tagColor:"Tag Color",noTags:"No tags",deleteConfirm:"Are you sure you want to delete this tag?",manageTags:"Manage Tags"},uploadModal:{title:"Upload 3MF Files",dragDrop:"Drag & drop .3mf files here",or:"or",browseFiles:"Browse Files",extractionInfo:"The printer model will be automatically extracted from the 3MF file metadata.",uploaded:"uploaded",failed:"failed",uploading:"Uploading...",upload:"Upload",uploadFailed:"Upload failed"},editArchive:{title:"Edit Archive",name:"Name",namePlaceholder:"Print name",printer:"Printer",noPrinter:"No printer",project:"Project",noProject:"No project",itemsPrinted:"Items Printed",itemsPrintedHelp:"Number of items produced in this print job",notes:"Notes",notesPlaceholder:"Add notes about this print...",externalLink:"External Link",externalLinkPlaceholder:"https://printables.com/model/...",externalLinkHelp:"Link to Printables, Thingiverse, or other source",tags:"Tags",tagsPlaceholder:"Add tags...",addMoreTags:"Add more tags...",matchingTags:'Matching "{{query}}"',existingTags:"Existing tags",clickToAdd:"(click to add)",status:"Status",failureReason:"Failure Reason",selectReason:"Select reason...",photos:"Photos of Printed Result",photosHelp:"Click + to add photos of your printed result",printResult:"Print result",saving:"Saving...",failureReasons:{adhesionFailure:"Adhesion failure",spaghettiDetached:"Spaghetti / Detached",layerShift:"Layer shift",cloggedNozzle:"Clogged nozzle",filamentRunout:"Filament runout",warping:"Warping",stringing:"Stringing",underExtrusion:"Under-extrusion",powerFailure:"Power failure",userCancelled:"User cancelled",other:"Other"},statuses:{completed:"Completed",failed:"Failed",aborted:"Cancelled",printing:"Printing"}},kProfiles:{title:"K-Profiles",noPrintersConfigured:"No Printers Configured",addPrinterInSettings:"Add a printer in Settings to manage K-profiles",noActivePrinters:"No Active Printers",enablePrinterConnection:"Enable a printer connection to view its K-profiles",loadingProfiles:"Loading K-Profiles...",printerOffline:"Printer Offline",printerOfflineDesc:"The selected printer is not connected. Power it on to view K-profiles.",noMatchingProfiles:"No Matching Profiles",noMatchingProfilesDesc:"No profiles match your search criteria",noKProfiles:"No K-Profiles",noKProfilesDesc:"No pressure advance profiles found for {{diameter}}mm nozzle",createFirstProfile:"Create First Profile",printer:"Printer",nozzle:"Nozzle",refresh:"Refresh",addProfile:"Add Profile",export:"Export",import:"Import",select:"Select",selectAll:"Select All",delete:"Delete",searchPlaceholder:"Search by name or filament...",allExtruders:"All Extruders",leftOnly:"Left Only",rightOnly:"Right Only",allFlow:"All Flow",hfOnly:"HF Only",sOnly:"S Only",sortName:"Sort: Name",sortKValue:"Sort: K-Value",sortFilament:"Sort: Filament",leftExtruder:"Left Extruder",rightExtruder:"Right Extruder",modal:{addTitle:"Add K-Profile",editTitle:"Edit K-Profile",profileName:"Profile Name",profileNamePlaceholder:"My PLA Profile",kValue:"K-Value",kValuePlaceholder:"0.020",kValueHelp:"Typical range: 0.01 - 0.06 for PLA, 0.02 - 0.10 for PETG",filament:"Filament",selectFilament:"Select filament...",noFilamentsHelp:"No filaments found. Create a K-profile in Bambu Studio first.",flowType:"Flow Type",highFlow:"High Flow",standard:"Standard",nozzleSize:"Nozzle Size",extruder:"Extruder",extruders:"Extruders",left:"Left",right:"Right",notes:"Notes (stored locally)",notesPlaceholder:"Add notes about this profile...",notesHelp:"Notes are saved in Bambuddy, not on the printer",syncing:"Syncing with printer...",savingExtruder:"Saving to extruder {{current}}/{{total}}...",pleaseWait:"Please wait"},deleteConfirm:{title:"Delete Profile",cannotUndo:"This cannot be undone",message:'Are you sure you want to delete "{{name}}" from the printer?'},bulkDelete:{title:"Delete Profiles",cannotUndo:"This cannot be undone",message:"Are you sure you want to delete {{count}} selected profiles from the printer?"},toast:{profileSaved:"K-profile saved",profilesSaved:"K-profile saved to {{count}} extruders",selectAtLeastOneExtruder:"Please select at least one extruder",profileDeleted:"K-profile deleted",profilesDeleted:"Deleted {{count}} profiles",exportedProfiles:"Exported {{count}} profiles",importedProfiles:"Imported {{count}} of {{total}} profiles",noProfilesToExport:"No profiles to export",invalidFileFormat:"Invalid file format",failedToParseImport:"Failed to parse import file",failedToSaveBatch:"Failed to save K-profiles",noteSaved:"Note saved",failedToSaveNote:"Failed to save note"},permission:{noRead:"You do not have permission to refresh profiles",noCreate:"You do not have permission to add profiles",noUpdate:"You do not have permission to update K-profiles",noDelete:"You do not have permission to delete K-profiles",noExport:"You do not have permission to export profiles",noImport:"You do not have permission to import profiles"}},virtualPrinter:{title:"Virtual Printer",running:"Running",stopped:"Stopped",description:{default:"Enable a virtual printer that appears in Bambu Studio and OrcaSlicer. Files sent to this printer will be archived directly without printing.",proxy:"Enable a proxy that relays slicer traffic to a real printer, allowing remote printing over any network."},enable:{title:"Enable Virtual Printer",visibleInSlicer:'Visible as "Bambuddy" in slicer discovery',proxyingTo:"Proxying to {{name}}",notActive:"Not active"},model:{title:"Printer Model",description:"Select which printer model to emulate.",restartWarning:"Changing the model will restart the virtual printer"},accessCode:{title:"Access Code",isSet:"Access code is set",notSet:"No access code set - required to enable",placeholder:"Enter 8-char code",placeholderChange:"Enter new code to change",hint:"Must be exactly 8 characters. Used by slicers to authenticate.",charCount:"({{count}}/8)"},targetPrinter:{title:"Target Printer",configured:"Proxy target configured",notConfigured:"No target printer selected - required for proxy mode",placeholder:"Select a printer...",hint:"Select the printer to proxy slicer traffic to. The printer must be in LAN mode.",noPrinters:"No printers configured. Add a printer first to use proxy mode."},remoteInterface:{title:"Network Interface Override",configured:"Interface override active",optional:"Optional - use if auto-detected IP is wrong (e.g. multiple NICs, Docker, VPN)",placeholder:"Auto-detect (default)...",hint:"Override the IP address advertised via SSDP and used in the TLS certificate. Useful when Bambuddy has multiple network interfaces."},mode:{title:"Mode",archive:"Archive",archiveDesc:"Archive files immediately",review:"Review",reviewDesc:"Review before archiving",queue:"Queue",queueDesc:"Archive and add to queue",proxy:"Proxy",proxyDesc:"Relay to real printer"},autoDispatch:{title:"Auto-dispatch",description:"Automatically start prints when added to queue. When off, prints wait for manual dispatch."},queueForceColorMatch:{title:"Force color match",description:"Refuse to dispatch onto a printer that does not have the exact filament type and color loaded. Off by default — without this, the queue uses model-only matching and may pick a printer with the wrong color loaded."},tailscaleDisabled:{title:"Tailscale integration",description:"Enable to mark this VP as exposed over Tailscale. Shows the host's Tailscale address so you know which IP to paste into the slicer. The CA-import step is unchanged — this toggle has no effect on certificates."},setupRequired:{title:"Setup Required",description:"The virtual printer feature requires additional system configuration before it will work. This includes port forwarding, firewall rules, and platform-specific settings.",readGuide:"Read the setup guide before enabling"},archiveNameSource:{title:"Archive name source",description:'Choose how new archives are named when files arrive via the virtual printer. "Metadata" uses the slicer-embedded title from the 3MF (default). "Filename" uses the filename Bambu Studio sent over FTP — handy if you renamed the job in the "send to printer" dialog.',metadata:"Metadata",filename:"Filename"},caCert:{title:"Slicer certificate",description:"Virtual printers use a TLS certificate signed by the Bambuddy CA. Import this CA certificate into your slicer's trust store once so it accepts the connection — no need to copy it from the command line.",copy:"Copy",copied:"Copied",download:"Download",fingerprint:"SHA-256"},howItWorks:{title:"How it works",step1:"On the same LAN, virtual printers appear in your slicer (Bambu Studio / OrcaSlicer) automatically via discovery. From other networks, add them manually by IP address and access code.",step2:'In Archive, Review, and Queue modes, use the "Send" button in your slicer to upload 3MF files to Bambuddy. The slicer will show "Print success" — the file is stored, not printed.',step3:"In Proxy mode, the virtual printer relays all traffic to a real printer — prints start immediately as if connected directly."},status:{title:"Status Details",printerName:"Printer Name",model:"Model",serialNumber:"Serial Number",mode:"Mode",pendingFiles:"Pending Files",targetPrinter:"Target Printer",ftpPort:"FTP Port",mqttPort:"MQTT Port",ftpConnections:"FTP Connections",mqttConnections:"MQTT Connections"},toast:{updated:"Virtual printer settings updated",failedToUpdate:"Failed to update settings",copyFailed:"Failed to copy — try selecting the text manually",accessCodeRequired:"Please set an access code first",targetPrinterRequired:"Please select a target printer first",bindIpRequired:"Please set a bind IP first",accessCodeEmpty:"Access code cannot be empty",accessCodeLength:"Access code must be exactly 8 characters",created:"Virtual printer created",failedToCreate:"Failed to create virtual printer",deleted:"Virtual printer deleted",failedToDelete:"Failed to delete virtual printer"},list:{title:"Virtual Printers",add:"Add",addFirst:"Add Virtual Printer",empty:"No virtual printers configured. Add one to get started."},bindIp:{title:"Bind Interface",placeholder:"Select interface...",hint:"Network interface for this virtual printer to bind to. Must be unique per printer."},proxy:{accessCodeHint:"In proxy mode, use your target printer's access code in the slicer. The connection is forwarded transparently to the real printer."},addDialog:{title:"Add Virtual Printer",name:"Name",hint:"You can configure access code, target printer, and other settings after creating.",create:"Create"},deleteConfirm:{title:"Delete Virtual Printer",message:'Are you sure you want to delete "{{name}}"? This will stop all services for this printer.'}},modelViewer:{openInSlicer:"Open in Slicer",tabs:{model:"3D Model",gcode:"G-code Preview"},notAvailable:"not available",notSliced:"not sliced",plates:"Plates",allPlates:"All Plates",plateNumber:"Plate {{number}}",plateCount:"{{count}} plate",plateCount_other:"{{count}} plates",objectCount:"{{count}} object",objectCount_other:"{{count}} objects",filamentCount:"{{count}} filament",filamentCount_other:"{{count}} filaments",eta:"ETA {{minutes}} min",noPreview:"No preview available for this file",pagination:{pageOf:"Page {{current}} of {{total}}",prev:"Prev",next:"Next"},errors:{failedToLoad:"Failed to load file",noMeshes:"No meshes found in 3MF file",unsupportedFormat:"Unsupported file format"}},maintenanceDescriptions:{lubricateCarbonRods:"Apply lubricant to carbon rods for smooth motion",lubricateRails:"Apply lubricant to linear rails for smooth motion",cleanNozzle:"Clean hotend and nozzle to prevent clogs",checkBelts:"Verify belt tension for accurate prints",cleanBuildPlate:"Clean build plate for better adhesion",checkExtruder:"Inspect extruder gears for wear",checkCooling:"Ensure cooling fans are working properly",generalInspection:"General printer inspection",cleanCarbonRods:"Clean carbon rods to reduce friction",lubricateSteelRods:"Apply lubricant to steel rods for smooth motion",cleanSteelRods:"Clean steel rods to reduce friction",cleanLinearRails:"Wipe linear rails to remove dust and debris",checkPtfeTube:"Inspect PTFE tube for wear or damage",replaceHepaFilter:"Replace HEPA filter for air quality",replaceCarbonFilter:"Replace activated carbon filter",lubricateLeftNozzleRail:"Lubricate left nozzle rail (H2 series)"},smartPlugs:{offline:"Offline",admin:"Admin",openPlugAdminPage:"Open plug admin page",deleteSmartPlug:"Delete Smart Plug",turnOnSmartPlug:"Turn On Smart Plug",turnOffSmartPlug:"Turn Off Smart Plug",turnOn:"Turn On",turnOff:"Turn Off",addSmartPlug:{scanningNetwork:"Scanning network...",chooseEntity:"Choose an entity...",connectionFailed:"Connection failed",searchEntities:"Search entities...",searchPowerSensors:"Search power sensors...",searchEnergySensors:"Search energy sensors...",placeholders:{plugName:"Living Room Plug",mqttStateOnValue:"ON, true, 1",mqttSameAsPower:"Same as power topic, or different"}},linkedTo:"Linked to:",monitorOnly:"Monitor Only",alerts:"Alerts",scheduleOn:"On {{time}}",scheduleOff:"Off {{time}}",on:"On",off:"Off",power:"Power",kwhToday:"kWh Today",settings:"Settings",automationSettings:"Automation Settings",showInSwitchbar:"Show in Switchbar",quickAccessSidebar:"Quick access from sidebar",enabled:"Enabled",enableAutomation:"Enable automation for this plug",autoOn:"Auto On",autoOnDescription:"Turn on when print starts",autoOff:"Auto Off",autoOffDescription:"Turn off when print completes (one-shot)",autoOffPersistent:"Keep Enabled",autoOffPersistentDescription:"Stay enabled between prints instead of one-shot",autoOffAfterDrying:"Auto Off After Drying",autoOffAfterDryingDescription:"Turn off when AMS drying completes",delayAfterDryingMinutes:"Drying delay (minutes)",turnOffDelayMode:"Turn Off Delay Mode",time:"Time",temp:"Temp",delayMinutes:"Delay (minutes)",tempThreshold:"Temperature threshold (°C)",tempThresholdDescription:"Turns off when nozzle cools below this temperature",edit:"Edit",deleteConfirm:'Are you sure you want to delete "{{name}}"? This cannot be undone.',turnOnConfirm:'Are you sure you want to turn on "{{name}}"?',turnOffConfirm:'Are you sure you want to turn off "{{name}}"? This will cut power to the connected device.',failedToTurn:'Failed to turn {{action}} "{{name}}"',unknown:"Unknown",addTitle:"Add Smart Plug",editTitle:"Edit Smart Plug",stopScanning:"Stop Scanning",discoverTasmota:"Discover Tasmota Devices",foundDevices:"Found {{count}} device(s) - click to select:",noDevicesFound:"No Tasmota devices found on your network",haNotConfigured:"Home Assistant is not configured. Set it up in",haSettingsPath:"Settings → Network → Home Assistant",selectEntity:"Select Entity *",ipAddress:"IP Address *",nameLabel:"Name *",username:"Username",password:"Password",authHint:"Leave empty if your Tasmota device doesn't require authentication",linkToPrinter:"Link to Printer",noPrinter:"No printer (manual control only)",linkingDescription:"Linking enables automatic on/off when prints start/complete",powerAlerts:"Power Alerts",alertAbove:"Alert if above (W)",alertBelow:"Alert if below (W)",alertDescription:"Get notified when power consumption crosses these thresholds. Leave empty to disable that direction.",dailySchedule:"Daily Schedule",turnOnAt:"Turn On at",turnOffAt:"Turn Off at",scheduleDescription:"Automatically turn the plug on/off at these times daily. Leave empty to skip that action.",showOnPrinterCard:"Show on Printer Card",displayOnPrinterCard:"Display button on printer card",connectedResult:"Connected!",deviceLabel:"Device: {{name}} - ",stateLabel:"State: {{state}}",test:"Test",delete:"Delete",save:"Save",add:"Add",cancel:"Cancel",failedToStartScan:"Failed to start scan",nameRequired:"Name is required",entityRequired:"Entity is required for Home Assistant plugs",mqttTopicRequired:"At least one MQTT topic must be configured for power, energy, or state monitoring",loadingEntities:"Loading entities...",loading:"Loading...",failedToLoadEntities:"Failed to load entities: {{error}}",noEntitiesMatching:'No entities found matching "{{search}}"',noEntitiesAvailable:"No entities available",searchingEntities:"Searching all entities ({{count}} found)",showingEntities:"Showing switch, light, input_boolean ({{count}} available)",energyMonitoringOptional:"Energy Monitoring (Optional)",energyMonitoringHint:"Search and select sensors that provide power/energy data.",powerSensorW:"Power Sensor (W)",energyTodayKwh:"Energy Today (kWh)",totalEnergyKwh:"Total Energy (kWh)",noMatchingSensors:"No matching sensors",none:"None",mqttNotConfigured:"MQTT broker not configured. Set broker address in",mqttSettingsPath:"Settings → Network → MQTT Publishing",mqttNotConfiguredSuffix:"(you don't need to enable publishing, just fill in the broker details).",mqttMonitorOnlyDescription:"MQTT plugs receive power/energy data via MQTT subscription. On/off control is not available - use your MQTT broker or home automation system.",powerMonitoring:"Power Monitoring",energyMonitoring:"Energy Monitoring",stateMonitoring:"State Monitoring",optional:"optional",topic:"Topic",jsonPath:"JSON Path",multiplier:"Multiplier",onValue:"ON Value",mqttPowerHint:`JSON path extracts value from JSON payload (e.g., "power_l1"). Leave empty if topic publishes raw numeric values.
 Use multiplier 0.001 for mW→W, 1000 for kW→W.`,mqttEnergyHint:`JSON path extracts value from JSON payload. Leave empty for raw values.
 Use multiplier 0.001 for Wh→kWh, 1000 for MWh→kWh.`,mqttStateHint:`JSON path extracts value from JSON payload. Leave empty for raw values.
-ON value: the exact string that means "ON". Leave empty for auto-detect (ON, true, 1).`,restControl:"Control",restOnUrl:"Turn ON URL",restOffUrl:"Turn OFF URL",restOnBody:"ON Request Body",restOffBody:"OFF Request Body",restMethod:"HTTP Method",restHeaders:"Custom Headers (JSON)",restStatusUrl:"Status URL",restStatusPath:"State JSON Path",restStatusOnValue:"ON Value",restPowerUrl:"Power URL",restPowerPath:"Power JSON Path",restPowerMultiplier:"Power Multiplier",restEnergyUrl:"Energy URL",restEnergyPath:"Energy JSON Path",restEnergyMultiplier:"Energy Multiplier",restUrlRequired:"At least one URL (ON or OFF) is required for REST plugs",restHeadersHint:'e.g. {"Authorization": "Bearer your-token"}',restBodyHint:'e.g. ON, {"state": "on"}',restStatusHint:"URL to poll for current state",restPathHint:"e.g. state or data.power.status",restPowerUrlHint:"Separate URL for power data (uses Status URL if empty)",restEnergyUrlHint:"Separate URL for energy data (uses Status URL if empty)",restEnergyHint:"Each value can use its own URL or fall back to the Status URL. Use multipliers for unit conversion (e.g. 0.001 to convert Wh to kWh).",testConnection:"Test Connection",connectionSuccess:"Connection successful",noSwitchesInSwitchbar:"No switches in switchbar",enableSwitchbarHint:'Enable "Show in Switchbar" in Settings > Smart Plugs'},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"Email",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"SMTP email notifications",telegram:"Notifications via Telegram bot",discord:"Send to Discord channel via webhook",ntfy:"Free, self-hostable push notifications",pushover:"Simple, reliable push notifications",callmebot:"Free WhatsApp notifications via CallMeBot",webhook:"Generic HTTP POST to any URL",homeassistant:"Persistent notifications in Home Assistant dashboard"},lastSuccess:"Last: {{date}}",error:"Error",printer:"Printer:",allPrinters:"All printers",sendTestNotification:"Send Test Notification",eventSettings:"Event Settings",enabled:"Enabled",sendFromProvider:"Send notifications from this provider",printEvents:"Print Events",printerStatus:"Printer Status",amsAlarms:"AMS Alarms",amsHtAlarms:"AMS-HT Alarms",printQueue:"Print Queue",start:"Start",plateCheck:"Plate Check",complete:"Complete",failed:"Failed",stopped:"Stopped",progress:"Progress",offline:"Offline",lowFilament:"Low Filament",maintenance:"Maintenance",amsHumidity:"AMS Humidity",amsTemp:"AMS Temp",amsHtHumidity:"AMS-HT Humidity",amsHtTemp:"AMS-HT Temp",bedCooled:"Bed Cooled",firstLayer:"First Layer",quiet:"Quiet",digest:"Digest {{time}}",printStarted:"Print Started",plateNotEmpty:"Plate Not Empty",plateNotEmptyDescription:"Objects detected before print",printCompleted:"Print Completed",bedCooledLabel:"Bed Cooled",bedCooledDescription:"Bed cooled below threshold after print",firstLayerCompleteLabel:"First Layer Complete",firstLayerCompleteDescription:"Notify with snapshot when first layer finishes",missingSpoolAssignmentLabel:"Missing Spool Assignment",missingSpoolAssignmentDescription:"Notify when print starts and required trays have no assigned spool",printFailed:"Print Failed",printStopped:"Print Stopped",progressMilestones:"Progress Milestones",progressMilestonesDescription:"Notify at 25%, 50%, 75%",printerOffline:"Printer Offline",printerError:"Printer Error",lowFilamentLabel:"Low Filament",maintenanceDue:"Maintenance Due",maintenanceDueDescription:"Notify when maintenance is needed",amsHumidityHigh:"AMS Humidity High",amsHumidityHighDescription:"Regular AMS humidity exceeds threshold",amsTemperatureHigh:"AMS Temperature High",amsTemperatureHighDescription:"Regular AMS temperature exceeds threshold",amsHtHumidityHigh:"AMS-HT Humidity High",amsHtHumidityHighDescription:"AMS-HT humidity exceeds threshold",amsHtTemperatureHigh:"AMS-HT Temperature High",amsHtTemperatureHighDescription:"AMS-HT temperature exceeds threshold",inventoryAlerts:"Inventory Alerts",stockReorderAlert:"Reorder Alert",stockReorderAlertDescription:"SKU has reached its reorder point",stockBreakAlert:"Stock Break Alert",stockBreakAlertDescription:"Stock will run out before replenishment arrives",jobAdded:"Job Added",jobAddedDescription:"Job added to queue",jobAssigned:"Job Assigned",jobAssignedDescription:"Model-based job assigned to printer",jobStarted:"Job Started",jobStartedDescription:"Queue job started printing",jobWaiting:"Job Waiting",jobWaitingDescription:"Job waiting for filament or printer",jobSkipped:"Job Skipped",jobSkippedDescription:"Job skipped (previous failed)",jobFailed:"Job Failed",jobFailedDescription:"Job failed to start",queueComplete:"Queue Complete",queueCompleteDescription:"All queue jobs finished",quietHours:"Quiet Hours",noNotificationsDuring:"No notifications during these hours",editProviderToChangeQuietHours:"Edit provider to change quiet hours",dailyDigest:"Daily Digest",batchNotifications:"Batch notifications into a single daily summary",sendAt:"Send at {{time}}",editProviderToChangeDigestTime:"Edit provider to change digest time",edit:"Edit",deleteProvider:"Delete Notification Provider",deleteConfirm:'Are you sure you want to delete "{{name}}"? This cannot be undone.',delete:"Delete",addTitle:"Add Notification Provider",editTitle:"Edit Notification Provider",nameLabel:"Name *",namePlaceholder:"My Notifications",providerTypeLabel:"Provider Type *",configuration:"Configuration",testConfiguration:"Test Configuration",printerFilter:"Printer Filter",onlyFromPrinter:"Only send notifications for events from this printer",quietHoursDnd:"Quiet Hours (Do Not Disturb)",quietStart:"Start",quietEnd:"End",dailyDigestLabel:"Daily Digest",sendDigestAt:"Send digest at",digestCollected:"Events will be collected and sent as a single summary at this time",notificationEvents:"Notification Events",progressPercent:"(25%, 50%, 75%)",bedCooledAfterPrint:"(after print completes)",eventPriority:{sectionTitle:"ntfy Priority",helpNtfy:"Pick a priority for each enabled event. ntfy uses these to escalate alerts (sound, visibility, push behavior). Levels not set here use the ntfy server default.",min:"Min",low:"Low",default:"Default",high:"High",urgent:"Urgent"},cancel:"Cancel",save:"Save",add:"Add",nameRequired:"Name is required",fieldRequired:"{{field}} is required",phoneNumber:"Phone Number",apiKey:"API Key",serverUrl:"Server URL",topic:"Topic",authToken:"Auth Token",userKey:"User Key",appToken:"App Token",priority:"Priority",botToken:"Bot Token",chatId:"Chat ID",smtpServer:"SMTP Server",smtpPort:"SMTP Port",security:"Security",authentication:"Authentication",username:"Username",password:"Password",fromEmail:"From Email",toEmail:"To Email",webhookUrl:"Webhook URL",payloadFormat:"Payload Format",authorization:"Authorization",titleFieldName:"Title Field Name",messageFieldName:"Message Field Name",editTemplate:"Edit Template: {{name}}",titleLabel:"Title",bodyLabel:"Body",titlePlaceholder:"Notification title...",bodyPlaceholder:"Notification body...",availableVariables:"Available Variables",clickToInsert:"Click to insert at cursor position in body",livePreview:"Live Preview",hide:"Hide",show:"Show",loadingPreview:"Loading preview...",enterTemplateContent:"Enter template content to see preview",titlePreview:"Title:",bodyPreview:"Body:",resetToDefault:"Reset to Default",titleRequired:"Title is required",bodyRequired:"Body is required",notificationLog:"Notification Log",showFailedOnly:"Failed only",last24Hours:"Last 24 hours",last7Days:"Last 7 days",last30Days:"Last 30 days",last90Days:"Last 90 days",justNow:"Just now",noFailedNotifications:"No failed notifications",noNotificationsLogged:"No notifications logged",unknownProvider:"Unknown Provider",logTitle:"Title",logMessage:"Message",logError:"Error",logProvider:"Provider: {{type}}",logTime:"Time: {{time}}",refresh:"Refresh",clearOld:"Clear Old",statsSummary:"Last {{days}} days:",statsNotifications:"notifications",statsSent:"{{count}} sent",statsFailed:"{{count}} failed",eventTypes:{print_start:"Print Started",print_complete:"Print Complete",print_failed:"Print Failed",print_stopped:"Print Stopped",print_progress:"Progress",printer_offline:"Printer Offline",printer_error:"Printer Error",filament_low:"Low Filament",maintenance_due:"Maintenance Due",test:"Test"},userEmail:{title:"Notifications",emailNotifications:"Email Notifications",emailNotificationsDesc:"Receive email notifications for your own print jobs. Emails are sent using the system SMTP settings configured in Advanced Authentication.",sendingTo:"Notifications will be sent to",noEmailWarning:"Your account does not have an email address. Contact an administrator to add one.",printJobNotifications:"Print Job Notifications",printJobNotificationsDesc:"Choose which events trigger email notifications for print jobs you submit.",printJobStarts:"Print Job Starts",printJobStartsDesc:"Get notified when your print job begins.",printJobFinishes:"Print Job Finishes",printJobFinishesDesc:"Get notified when your print job completes successfully.",printErrors:"Print Errors",printErrorsDesc:"Get notified when your print job fails or encounters an error.",printJobStops:"Print Job Stops",printJobStopsDesc:"Get notified when your print job is cancelled or stopped.",saveSuccess:"Notification preferences saved.",saveError:"Failed to save notification preferences."}},richTextEditor:{bold:"Bold",italic:"Italic",underline:"Underline",bulletList:"Bullet List",numberedList:"Numbered List",alignLeft:"Align Left",alignCenter:"Align Center",alignRight:"Align Right",addLink:"Add Link",removeLink:"Remove Link"},externalLinks:{noLinksConfigured:"No external links configured",deleteLink:"Delete Link",removeCustomIcon:"Remove custom icon",openInNewTab:"Open in new tab",placeholders:{linkName:"My Link"}},keyboardShortcuts:{title:"Keyboard Shortcuts",navigation:"Navigation",archivesSection:"Archives",kProfilesSection:"K-Profiles",generalSection:"General",shortcuts:{goToPrinters:"Go to Printers",goToArchives:"Go to Archives",goToQueue:"Go to Queue",goToStats:"Go to Statistics",goToProfiles:"Go to Cloud Profiles",goToSettings:"Go to Settings",focusSearch:"Focus search",openUploadModal:"Open upload modal",clearSelection:"Clear selection / blur input",contextMenu:"Context menu on cards",refreshProfiles:"Refresh profiles",newProfile:"New profile",exitSelectionMode:"Exit selection mode",showHelp:"Show this help"},footer:"Press Esc or click outside to close"},notificationLog:{title:"Notification Log",events:{printStarted:"Print Started",printComplete:"Print Complete",printFailed:"Print Failed",printStopped:"Print Stopped",progress:"Progress",printerOffline:"Printer Offline",printerError:"Printer Error",lowFilament:"Low Filament",maintenanceDue:"Maintenance Due",test:"Test"},timeAgo:{justNow:"Just now",minutesAgo:"{{minutes}}m ago",hoursAgo:"{{hours}}h ago"}},restoreBackup:{title:"Restore Backup",restoring:"Restoring...",restoreComplete:"Restore Complete",restoreFailed:"Restore Failed",importSettings:"Import settings from a backup file",pleaseWait:"Please wait while your data is being restored",clickToSelect:"Click to select backup file (.json or .zip)",howDuplicateHandling:"How duplicate handling works:",categories:{printers:"Printers",smartPlugs:"Smart Plugs",notificationProviders:"Notification Providers",filaments:"Filaments",archives:"Archives",pendingUploads:"Pending Uploads",settingsTemplates:"Settings & Templates"},matchingInfo:{printers:"matched by serial number",smartPlugs:"matched by IP address",notificationProviders:"matched by name",filaments:"matched by name + type + brand",archives:"matched by content hash",pendingUploads:"matched by filename",settingsTemplates:"always overwritten"},replaceExisting:"Replace existing data",keepExisting:"Keep existing data",replaceDescription:"Overwrite items that already exist with backup data",keepDescription:"Only restore items that don't already exist",caution:"Caution:",cautionText:"Overwriting will replace your current configurations with backup data. Printer access codes are never overwritten for security.",itemsRestored:"Items Restored",itemsSkipped:"Items Skipped",restored:"Restored",skipped:"Skipped (already exist)",filesLabel:"Files (3MF, thumbnails, etc.)",newApiKeysGenerated:"New API Keys Generated",newApiKeysWarning:"These keys are only shown once. Copy them now!",processingBackup:"Processing backup file...",noDataFound:"No data was found to restore in the backup file.",failedToRestore:"Failed to restore backup. Please check the file format."},backupExport:{title:"Export Backup",selectData:"Select data to include",selectAll:"Select All",selectNone:"Select None",categoryDescriptions:{settings:"Language, theme, update preferences",notifications:"ntfy, Pushover, Discord, etc.",templates:"Custom message templates",smartPlugs:"Tasmota plug configurations",externalLinks:"Sidebar links to external services",printers:"Printer info (access codes excluded)",plateDetection:"Empty plate reference images",filaments:"Filament types and costs",maintenance:"Custom maintenance schedules",archives:"All print data + files (3MF, thumbnails, photos)",projects:"Projects, BOM items, and attachments",pendingUploads:"Virtual printer uploads awaiting review",apiKeys:"Webhook API keys (new keys generated on import)"},requiresPrinters:"Requires Printers to be selected",zipFileWarning:"ZIP file will be created.",zipFileDescription:"Includes all 3MF files, thumbnails, timelapses, and photos. This may take a while and result in a large file.",includeAccessCodes:"Include Access Codes",includeAccessCodesDescription:"For transferring to another machine",includeAccessCodesWarning:"Access codes will be included in plain text. Keep this backup file secure!",categoriesSelected:"{{selectedCount}} categories selected"},pendingUploads:{placeholders:{notes:"Add notes about this print..."},discardUpload:"Discard Upload",archiveAllUploads:"Archive All Uploads",discardAllUploads:"Discard All Uploads",archive:"Archive",timeAgo:{justNow:"Just now",minutesAgo:"{{minutes}}m ago",hoursAgo:"{{hours}}h ago",daysAgo:"{{days}}d ago"}},apiBrowser:{placeholders:{requestBody:"JSON request body...",searchEndpoints:"Search endpoints..."}},configureAmsSlot:{title:"Configure AMS Slot",slotConfigured:"Slot Configured!",configuringSlot:"Configuring slot:",slotLabel:"{{ams}} Slot {{slot}}",searchPresets:"Search presets...",colorPlaceholder:"Color name or hex (e.g., brown, FF8800)",clearCustomColor:"Clear custom color",noCloudPresets:"No cloud presets. Login to Bambu Cloud to sync.",noPresetsAvailable:"No presets available. Login to Bambu Cloud or import local profiles.",noMatchingPresets:"No matching presets found.",custom:"Custom",builtin:"Built-in",settingsSentToPrinter:"Settings sent to printer",filamentProfile:"Filament Profile",kProfileLabel:"K Profile (Pressure Advance)",filteringFor:"Filtering for: {{material}}",noKProfile:"No K profile (use default 0.020)",noMatchingKProfiles:"No matching K profiles found. Default K=0.020 will be used.",selectFilamentFirst:"Select a filament profile first",kFromCalibration:"K={{value}} from printer calibration",customColorLabel:"Custom Color (optional)",presetColors:"{{name}} colors:",showLessColors:"Show less colors",showMoreColors:"Show more colors",clear:"Clear",hexLabel:"Hex: #{{hex}}",resetting:"Resetting...",resetSlot:"Reset Slot",cancel:"Cancel",configuring:"Configuring...",configureSlot:"Configure Slot"},githubBackup:{title:"Git Backup",history:"History",downloadBackup:"Download Backup",restoreBackup:"Restore Backup",noBackupsYet:"No backups yet"},emailSettings:{placeholders:{fromName:"BamBuddy"}},tagManagement:{searchTags:"Search tags...",renameTag:"Rename tag",deleteTag:"Delete tag"},notificationTemplates:{placeholders:{title:"Notification title...",body:"Notification body..."}},batchTag:{placeholders:{newTag:"Enter new tag..."}},photoGallery:{deletePhoto:"Delete Photo"},filamentHoverCard:{copySpoolUuid:"Copy spool UUID"},kProfilesView:{hasNote:"Has note",copyProfile:"Copy profile"},layout:{openMenu:"Open menu",noPermissionSystemInfo:"You do not have permission to view system information"},dashboard:{dragToReorder:"Drag to reorder",hideWidget:"Hide widget"},notificationProviderCard:{deleteNotificationProvider:"Delete Notification Provider"},fileManagerModal:{closeFileManager:"Close file manager",sortFiles:"Sort files",goToParentFolder:"Go to parent folder",threeView:"3D View"},embeddedCameraViewer:{refreshStream:"Refresh stream",close:"Close",zoomOut:"Zoom out",resetZoom:"Reset zoom",zoomIn:"Zoom in",dragToResize:"Drag to resize"},timelapseViewer:{skipBack5s:"Skip back 5s",skipForward5s:"Skip forward 5s"},notificationProviders:{descriptions:{email:"SMTP email notifications",telegram:"Notifications via Telegram bot",discord:"Send to Discord channel via webhook",ntfy:"Free, self-hostable push notifications",pushover:"Simple, reliable push notifications",callmebot:"Free WhatsApp notifications via CallMeBot",webhook:"Generic HTTP POST to any URL"}},logViewer:{searchPlaceholder:"Search message or logger name...",noLogEntries:"No log entries found"},switchbarPopover:{noSwitchesInSwitchbar:"No switches in switchbar"},projectPageModal:{placeholders:{title:"Title",designer:"Designer",license:"License",description:"Enter description...",profileTitle:"Profile Title",profileDescription:"Profile description..."}},spoolmanSettings:{},time:{unknown:"-",waiting:"Waiting",justNow:"Just now",now:"Now",minsAgo:"{{count}}m ago",inMins:"in {{count}}m",hoursAgo:"{{count}}h ago",inHours:"in {{count}}h",daysAgo:"{{count}}d ago",inDays:"in {{count}}d"},spoolbuddy:{nav:{dashboard:"Dashboard",ams:"AMS",inventory:"Inventory",writeTag:"Write",settings:"Settings"},status:{nfcReady:"NFC Ready",nfcOff:"NFC Off",offline:"Offline",online:"Online",noPrinters:"No printers",deviceOffline:"Device Offline",waitingConnection:"Waiting for device connection...",systemReady:"System Ready",status:"Status"},dashboard:{readyToScan:"Ready to scan",idleMessage:"Place a spool on the scale to identify it",nfcHint:"NFC tag will be read automatically",device:"Device",syncWeight:"Sync Weight",weightSynced:"Synced!",unknownTag:"Unknown Tag",newTag:"New Tag Detected",onScale:"on scale",linkSpool:"Link to Spool",linkTagTitle:"Link Tag to Spool",linkTag:"Link Tag",selectSpool:"Select a spool to link this tag to:",noUntagged:"No spools without tags found",tagDetected:"Tag detected",noTag:"No tag",tagId:"Tag",grossWeight:"Gross weight",spoolSize:"Spool size",close:"Close",currentSpool:"Current Spool",plateReady:"Plate ready: {{name}}",plateReadyLabel:"Plates ready to clear",plateClearAction:"Clear",plateClearedToast:"Plate marked as cleared",plateClearFailed:"Could not mark plate as cleared"},modal:{spoolDetected:"Spool Detected",assignToAms:"Assign to AMS",syncWeight:"Sync Weight",weightSynced:"Synced!",syncing:"Syncing...",newTagDetected:"New Tag Detected",addToInventory:"Add to Inventory",assignToAmsTitle:"Assign to AMS",selectSlot:"Select a slot",assign:"Assign",assigning:"Assigning...",assignSuccess:"Assigned!",assignPendingInsert:"Assigned. Slot will configure when you insert the spool.",assignError:"Failed to assign spool. Please try again.",noPrinterSelected:"Select a printer...",noAmsDetected:"No AMS detected on this printer",slot:"Slot"},weight:{noReading:"No reading",stable:"Stable",measuring:"Measuring...",tare:"Tare",calibrate:"Calibrate"},spool:{remaining:"Remaining",material:"Material",brand:"Brand",color:"Color",coreWeight:"Core",labelWeight:"Label",scaleWeight:"Scale",netWeight:"Net",lastUsed:"Last used"},ams:{noData:"No AMS detected",connectAms:"Connect an AMS to see filament slots",noPrinter:"No printer selected",selectPrinter:"Select a printer from the top bar",printerDisconnected:"Printer disconnected",humidity:"Humidity",level:"Level",active:"Active",slot:"Slot",empty:"Empty"},inventory:{search:"Search spools...",empty:"No spools in inventory",noResults:"No matching spools",spools:"spools",addSpool:"Add Spool"},settings:{tabDevice:"Device",tabDisplay:"Display",tabScale:"Scale",tabUpdates:"Updates",nfcReader:"NFC Reader",type:"Type",connection:"Connection",notConnected:"N/A",deviceInfo:"Device Info",hostname:"Host",uptime:"Uptime",systemConfig:"Backend & Auth",backendUrl:"Bambuddy Backend URL",apiToken:"API Token",apiTokenPlaceholder:"Enter API token",saveConfig:"Save Config",systemQueued:"Config queued.",nfcDiagnostic:"NFC Diagnostic",scaleDiagnostic:"Scale Diagnostic",readTagDiagnostic:"Read Tag Diagnostic",testNfc:"Test reader",testScale:"Test accuracy",testReadTag:"Read tag",systemFieldsRequired:"Backend URL is required.",brightness:"Brightness",saved:"Saved",noBacklight:"No DSI backlight detected. Brightness control requires a DSI display.",screenBlank:"Screen Blank Timeout",screenBlankDesc:"Screen turns off after inactivity. Touch to wake.",displayNote:"Brightness is applied as a software filter.",scaleCalibration:"Scale Calibration",currentWeight:"Current weight",tareOffset:"Tare",calFactor:"Factor",knownWeight:"Known weight",calStep1:"Remove all items from the scale and press Set Zero.",calStep2:"Place known weight on scale.",setZero:"Set Zero",calibrateNow:"Calibrate",calibrated:"Calibrated",tareSet:"Tare command sent. Waiting for device...",tareComplete:"Tare complete!",tareTimedOut:"Tare timed out — is the SpoolBuddy daemon running?",tareFailed:"Failed to send tare command",zeroSet:"Zero point set. Place known weight on scale.",calibrationDone:"Calibration complete!",calibrationFailed:"Calibration failed",lastCalibrated:"Last calibrated",stable:"Stable",settling:"Settling...",firmware:"Firmware",scale:"Scale",noDevice:"No SpoolBuddy device found",daemonVersion:"Daemon Version",currentVersion:"Current",versionPending:"Waiting for daemon...",checking:"Checking...",checkUpdates:"Check for Updates",updateAvailable:"Update available",updateInstructions:"Update via SSH: run the SpoolBuddy install script to upgrade.",upToDate:"Up to date",includeBeta:"Include beta versions"},writeTag:{tabExisting:"Existing Spool",tabNew:"New Spool",tabReplace:"Replace Tag",searchPlaceholder:"Search by material, color, brand...",noUntaggedSpools:"No spools without tags",noTaggedSpools:"No spools with tags",selectSpool:"Select a spool, then place a blank NTAG on the reader",placeTag:"Place an NTAG on the reader",tagReady:"Tag detected — ready to write",writeTag:"Write Tag",replaceTag:"Replace Tag",writing:"Writing tag...",waiting:"Waiting for SpoolBuddy...",writeSuccess:"Tag written successfully!",writeFailed:"Write failed",queueFailed:"Failed to queue write command",tryAgain:"Try Again",cancel:"Cancel",replaceWarning:"Old tag will be unlinked. New tag will replace it.",deviceOffline:"SpoolBuddy is offline",material:"Material",colorName:"Color Name",color:"Color",brand:"Brand",weight:"Weight (g)",createSpool:"Create Spool",creating:"Creating...",spoolCreated:"Spool created! Ready to write.",createFailed:"Failed to create spool",incompleteDataWarning:"Tag written with incomplete Spoolman data"},quickMenu:{printerPower:"Printer Power",systemControls:"System",restartDaemon:"Restart Daemon",restartBrowser:"Restart Browser",reboot:"Reboot",shutdown:"Shutdown",swipeToClose:"Swipe down to close",confirmTitle:"Confirm",confirmShutdown:"Are you sure you want to shut down the SpoolBuddy? You will need physical access to turn it back on.",confirmReboot:"Are you sure you want to reboot the SpoolBuddy?",confirmRestartDaemon:"Restart the SpoolBuddy daemon? NFC and scale will be temporarily unavailable.",confirmRestartBrowser:"Restart the kiosk browser? The display will briefly go blank.",confirm:"Confirm",confirmPlugOn:"Turn on {{name}}?",confirmPlugOff:"Turn off {{name}}?",turnOn:"Turn On",turnOff:"Turn Off"}},diagnostic:{modalTitle:"Connection diagnostic — {{name}}",running:"Running diagnostic...",runningElapsed:"Running diagnostic... ({{elapsed}}s)",waitingForReportHint:"Listening for the printer to publish a status report — this can take up to {{max}} seconds.",runFailed:"Diagnostic could not run: {{error}}",retry:"Run again",runButton:"Run diagnostic",sectionTitle:"Connection Diagnostic",sectionDescription:"Check why a printer won't connect or won't print — port reachability, LAN developer mode, Docker network mode, and credentials.",noPrinters:"No printers configured.",overall:{ok:"No problems found — the printer connection looks healthy.",warnings:"The printer should work, but some things need attention.",problems:"Found problems that explain why the printer won't connect or print."},check:{port_mqtt:{title:"Control port (MQTT 8883)",pass:"Reachable — the printer is accepting control connections.",fail:"Port 8883 is unreachable. The printer is powered off, on a different IP address, or a firewall is blocking it. Verify the printer IP and that nothing blocks port 8883."},port_ftps:{title:"File transfer port (FTPS 990)",pass:"Reachable — sending print files will work.",warn:"Port 990 is unreachable. Monitoring may still work, but sending prints to the printer will fail. Make sure port 990 is not blocked."},port_rtsps:{title:"Camera port (RTSPS 322)",pass:"Reachable — the camera stream will work.",warn:"Port 322 is unreachable. The live camera view will not work. This does not affect printing."},network_mode:{title:"Docker network mode",pass:"Running in host network mode.",warn:'Bambuddy is running in Docker bridge networking. Printer discovery and the Virtual Printer need host network mode — recreate the container with "network_mode: host".',skip:"Not running in Docker — not applicable."},subnet:{title:"Network subnet",pass:"The printer and Bambuddy are on the same subnet.",warn:"The printer ({{printer_ip}}) and Bambuddy ({{host_ip}}) are on different subnets. They may not reach each other unless routing between the subnets is configured.",skip:"Subnet could not be determined — skipped."},mqtt_auth:{title:"Printer credentials",pass:"The printer accepted the connection.",fail:"The printer is reachable but rejected the connection. The access code or serial number is most likely wrong. The access code changes every time Developer Mode is toggled — re-copy it from the printer screen.",skip:"Not checked — the printer could not be reached."},developer_mode:{title:"LAN Developer Mode",pass:"Developer Mode is enabled.",fail:"Developer Mode is OFF on the printer. Enable it in the printer's LAN settings — and confirm with OK. Without it, prints will not start.",skip:"Could not be checked — requires a live connection to the printer."},printer_publishing:{title:"Printer is publishing status",pass:"The printer is publishing status updates — AMS, filaments, and K-profiles will mirror correctly to the slicer.",fail:"The MQTT broker accepted the connection but the printer has not published any status reports. This is almost always a wrong or mis-cased serial number — the device/<serial>/report topic is case-sensitive. Re-check the serial in printer settings against the screen on the printer.",skip:"Could not be checked — requires a live connection to the printer."}}},systemHealth:{sectionTitle:"System Health",sectionDescription:"Scans recent logs for known issues you can usually fix yourself, before they turn into a support ticket.",rescan:"Re-scan",clean:"No known issues found in the last {{times}} log entries.",logUnavailable:"File logging is disabled, so logs cannot be scanned. Enable file logging to use this check.",learnMore:"How to fix",fixLabel:"Fix:",occurrences:"Seen {{times}}× — last at {{lastSeen}}",category:{layer8:"You can fix this",environment:"Environment",bug:"Please report this"},signature:{"ftp-auth-rejected":{name:"Printer rejected the access code",cause:"The printer refused the file-transfer login. The access code is wrong, or it changed after Developer Mode was toggled.",fix:"Re-copy the access code from the printer screen (LAN settings) and update it in the printer's settings in Bambuddy."},"ftp-connection-timeout":{name:"File-transfer connection timed out",cause:"Bambuddy could not reach the printer's file-transfer port (FTPS 990). The port is blocked, or the printer is off or on another subnet.",fix:"Make sure nothing blocks port 990 between Bambuddy and the printer, and that both are on the same network."},"ftp-ssl-error":{name:"Secure file-transfer handshake failed",cause:"The TLS handshake with the printer's file-transfer server failed. This is often a firewall or outdated printer firmware.",fix:"Update the printer firmware and check that no firewall or proxy intercepts the connection on port 990."},"mqtt-connection-flapping":{name:"Printer connection keeps dropping",cause:"The control connection (MQTT 8883) repeatedly disconnects and reconnects — usually a weak network path or a partially blocked port.",fix:"Check the Wi-Fi signal at the printer, prefer a wired connection, and make sure port 8883 is reliably reachable."},"camera-connection-refused":{name:"Camera stream unreachable",cause:"The live camera could not be reached on port RTSPS 322. The port is blocked, or the camera or LAN liveview is off on the printer.",fix:"Enable the camera and LAN liveview on the printer, and make sure port 322 is not blocked. This does not affect printing."},"database-locked":{name:"Database write contention",cause:'The SQLite database is hitting "database is locked" errors under load — common when running several printers at once.',fix:"Switch Bambuddy to an external PostgreSQL database. See the PostgreSQL guide in the documentation."}}},vpDiagnostic:{title:"Setup check — {{name}}",runButton:"Run setup check",running:"Running setup check...",runFailed:"Could not run the setup check: {{error}}",retry:"Run again",overall:{ok:"All checks passed — this virtual printer is set up correctly.",warnings:"The virtual printer should work, but some things need attention.",problems:"Found problems that explain why the slicer can't see or use this virtual printer."},check:{enabled:{title:"Virtual printer enabled",fail:"This virtual printer is switched off. Toggle it on to make it discoverable."},running:{title:"Services running",fail:"The virtual printer is enabled but its services are not running. Check the Bambuddy log — a bind IP conflict or a permission error usually stops them."},bind_interface:{title:"Bind network interface",fail:"The bind interface is not set, or no longer exists on this host. Pick a current interface in the Bind Interface dropdown."},access_code:{title:"Access code set",fail:"No access code is set. The slicer must be given the same 8-character access code you set here."},target_printer:{title:"Target printer",fail:"No target printer is selected. Proxy mode needs a real printer to forward to.",warn:"The target printer is offline right now — proxying will resume once it reconnects."},port_ftps:{title:"File-upload service (port {{port}})",fail:"Nothing is listening on port {{port}} of the bind IP, so the slicer cannot upload files. A port conflict on this interface is the usual cause."},port_mqtt:{title:"Control service (port {{port}})",fail:"Nothing is listening on port {{port}} of the bind IP, so the slicer cannot connect or show status."},port_bind:{title:"Discovery service (port {{port}})",fail:"Nothing is listening on port {{port}} of the bind IP, so the slicer's discovery handshake fails."},certificate:{title:"TLS certificate",pass:"Certificate ready. Make sure the Bambuddy CA certificate (above) is imported into your slicer's trust store.",fail:"The TLS certificate for this virtual printer is missing. Check that the Bambuddy data directory is writable."}}},bugReport:{title:"Report a Bug",description:"Description",descriptionPlaceholder:"What went wrong? Please describe the issue...",email:"Email (optional)",emailPlaceholder:"your@email.com",emailPrivacy:"If provided, your email will be included in a collapsed section of the GitHub issue so the maintainer can follow up.",screenshot:"Screenshot",uploadOrPaste:"Upload, paste, or drag an image",dataCollectedSummary:"What data is included in the report?",dataIncluded:"Included:",dataIncludedList:"App version, OS, architecture, Python version, database stats (counts only), printer models, nozzle counts, firmware versions, connectivity status, integration status (Spoolman, MQTT, HA), non-sensitive settings, network interface count, Docker details, dependency versions.",dataNeverIncluded:"Never included:",dataNeverIncludedList:"Printer names, serial numbers, access codes, passwords, IP addresses, email addresses, API keys, tokens, webhook URLs, hostnames, or usernames.",submit:"Submit",startLogging:"Start Debug Logging",stepEnableLogging:"Debug logging enabled",stepReproduce:"Reproduce the issue now",stepStopLogging:"Stop & submit report",stopAndSubmit:"Stop & Submit",maxDuration:"Auto-stops after {{minutes}} min",stoppingLogs:"Collecting logs & submitting...",submitting:"Submitting bug report...",submittingStepConnection:"Running printer connectivity checks",submittingStepVirtualPrinters:"Running virtual-printer setup checks",submittingStepLogScan:"Scanning recent logs for known issues",submittingStepSubmit:"Submitting report to GitHub",submitSuccess:"Bug report submitted successfully!",submitFailed:"Failed to submit bug report",diagnosticChecking:"Checking printer connections...",diagnosticHealthy:"Connection check passed — no problems found on your printers.",diagnosticSummary:"{{problems}} of {{total}} printers have connection issues",diagnosticIntro:"One or more printers have a connection problem that may be causing your issue. Expand a printer below to see the fix — resolving it could solve the problem without a bug report. You can still submit a report below.",logHealthSummary:"Known issues found in your logs",logHealthIntro:"Recent logs match known problems. Check the fixes below — resolving them could solve your issue without a bug report. You can still submit a report below.",thankYou:"Thank you!",submitted:"Your bug report has been submitted.",viewIssue:"View Issue",unexpectedError:"An unexpected error occurred"},failureDetection:{title:"AI Failure Detection",description:"Monitor prints with a self-hosted Obico ML API and act on detected failures automatically.",mlUrl:"Obico ML API URL",mlUrlHint:"Base URL of your self-hosted Obico ml_api container (e.g. http://192.168.1.10:3333).",test:"Test",testSuccess:"ML API reachable and healthy.",testFailed:"Could not reach the ML API.",sensitivity:"Sensitivity",sensitivityLow:"Low (fewer false positives)",sensitivityMedium:"Medium (balanced)",sensitivityHigh:"High (detect early, more false positives)",sensitivityHint:"Adjusts the confidence thresholds that trigger warnings and failures.",action:"Action on detected failure",actionNotify:"Notify only",actionPause:"Pause print",actionPauseOff:"Pause and cut power",pollInterval:"Poll interval (seconds)",pollIntervalHint:"How often to check each printer while it is printing. Minimum 5s, maximum 120s.",externalUrlMissing:"External URL is not set.",externalUrlHint:"The ML API fetches the camera snapshot by URL. Set the External URL in General settings so the ML API container can reach Bambuddy.",perPrinterTitle:"Monitored Printers",perPrinterHint:"Choose which printers the detection service watches.",monitorAll:"Monitor all connected printers",statusTitle:"Status",serviceRunning:"Service running",thresholds:"Low / High thresholds",activePrinters:"Active prints",noActivePrints:"No prints currently running.",historyTitle:"Recent Detections",noHistory:"No detections yet."},makerworld:{title:"MakerWorld",description:"Paste a MakerWorld model URL to import and print it directly from Bambuddy — without leaving for the Bambu Handy app.",pasteUrlHeader:"Import from MakerWorld",pasteUrlPlaceholder:"https://makerworld.com/en/models/… or paste any MakerWorld link",resolveButton:"Resolve",signInRequiredTitle:"Bambu Cloud sign-in required to download",signInRequiredBody:"You can browse model details anonymously, but MakerWorld requires a Bambu Cloud account to download 3MF files.",openCloudSettings:"Open Cloud settings",untitledModel:"Untitled model",byCreator:"by {{name}}",downloadsCount:"{{count}} downloads",licensePrefix:"License",alreadyImported:"Already in library",openOnMakerworld:"Open on MakerWorld",alreadyInLibrary:"This model is already in your library — find it in File Manager → MakerWorld",importSuccess:"Imported {{filename}} — saved to File Manager → MakerWorld",platesHeader:"Plates ({{count}})",plateDefaultName:"Plate {{n}}",materialCount:"{{count}} filaments",amsRequired:"AMS required",slicedFor:"Sliced for {{printer}}",alsoCompatible:"Also marked compatible: {{printers}}",importToLibrary:"Save",sliceIn:"Save & Slice in {{slicer}}",disclaimer:"MakerWorld integration uses community-documented API endpoints. Bambuddy is not affiliated with or endorsed by MakerWorld or Bambu Lab.",lastImportSuccess:"Imported to your library",lastImportAlreadyInLibrary:"Already in your library",viewInLibrary:"View in File Manager",openInBambuStudio:"Open in Bambu Studio",openInOrcaSlicer:"Open in OrcaSlicer",importTo:"Import to file manager",recentImportsHeader:"Recent imports",phaseResolving:"Resolving",phaseDownloading:"Downloading",folderAuto:"MakerWorld (default)",importAll:"Import all",importAllProgress:"Importing {{current}}/{{total}}",openGallery:"Open image gallery",galleryPrev:"Previous image",galleryNext:"Next image",deleteImport:"Remove from library",importDeleting:"Removing…",importDeleted:"Removed from library",confirmDelete:"Remove {{filename}} from the library? This deletes the local file but the plate can be re-imported from MakerWorld.",errors:{resolveFailed:"Could not resolve that MakerWorld URL.",downloadFailed:"Download failed. Please try again.",deleteFailed:"Could not remove the file from the library."}},gcodeViewer:{back:"Back",backToArchives:"Back to Print Archives",backToFiles:"Back to File Manager"},libraryTrash:{title:"Trash",headerButton:"Trash",headerTooltip:"View files moved to the trash",backToFiles:"Back to File Manager",subtitleAdmin:"Deleted files stay here for {{days}} days, then auto-delete. This view shows trashed files for all users.",subtitleUser:"Deleted files stay here for {{days}} days, then auto-delete.",loading:"Loading trash…",loadError:"Could not load the trash.",empty:"The trash is empty.",summary:"{{count}} files · {{size}}",emptyTrash:"Empty trash",restore:"Restore",purgeNow:"Delete now",autoPurgeIn:"Auto-deletes in {{when}}",days:"days",retentionLabel:"Auto-delete after",selectAll:"Select all",selectOne:"Select {{filename}}",selectionCount:"{{count}} selected",bulkRestore:"Restore selected",bulkPurge:"Delete selected",col:{filename:"File",folder:"Folder",size:"Size",deleted:"Moved to trash",autoPurge:"Auto-deletes",owner:"Owner",actions:"Actions"},confirm:{purgeTitle:"Delete permanently?",purgeBody:"{{filename}} will be deleted from disk and cannot be restored.",emptyTitle:"Empty the trash?",emptyBody:"All {{count}} files will be deleted from disk. This cannot be undone.",bulkPurgeTitle:"Delete selected files permanently?",bulkPurgeBody:"The {{count}} selected files will be deleted from disk and cannot be restored.",cta:"Delete permanently"},toast:{restored:"File restored.",restoreFailed:"Could not restore the file.",purged:"File deleted permanently.",purgeFailed:"Could not delete the file.",emptied:"Deleted {{count}} file(s) from trash.",emptyFailed:"Could not empty the trash.",retentionSaved:"Auto-delete set to {{days}} days.",retentionFailed:"Could not save retention setting.",bulkRestored:"Restored {{count}} file(s).",bulkPurged:"Deleted {{count}} file(s)."}},libraryPurge:{title:"Purge old files",headerButton:"Purge old",headerTooltip:"Bulk-move old files to trash",description:"Sweep old files out of your library in one shot. Files with a print history are aged by their last-printed date; files that were never printed are aged by their upload date.",ageLabel:"Move files older than",days:"days",includeNeverPrinted:"Include files that have never been printed",effectsTitle:"What happens when you click Purge",effect1:"Matching files are moved to Trash — they are not deleted from disk yet.",effect2:"You can restore them from Trash at any time until the retention window expires.",effect3:"After retention, the trash sweeper permanently removes them from disk.",effect4:"Files in external (linked) folders are skipped — Bambuddy never deletes bytes it does not own.",previewLoading:"Checking how many files match…",previewFailed:"Could not preview the purge.",previewSummary:"{{count}} files · {{size}} would move to trash",andMore:"…and {{count}} more",warning:"Trashed files still count against storage until the retention window expires. Empty the Trash afterwards to free disk immediately.",confirmCta:"Move {{count}} to trash",purging:"Moving to trash…",toast:{success:"Moved {{count}} file(s) to trash.",failed:"Could not purge files."}},libraryAutoPurge:{enableLabel:"Auto-purge old files",enableDescription:"Runs the admin purge once per day. Files go to Trash first — they are not deleted immediately.",ageLabel:"Auto-purge files older than",ageDescription:"Minimum 7 days, maximum 10 years. Uses the same age rule as the manual Purge button.",days:"days",includeNeverPrinted:"Include files that have never been printed",saveFailed:"Could not save auto-purge settings."},archivePurge:{headerButton:"Purge old",headerTooltip:"Bulk-delete old archives",title:"Purge old archives",description:"Clear out old print history. Each archive is aged by its most recent print completion — reprinting an archive refreshes its age, so active work is never purged.",ageLabel:"Delete archives not printed in the last",days:"days",effectsTitle:"What happens when you click Purge",effect1:"Each matching archive is hidden from the listings and its files are removed from disk (3MF, thumbnail, timelapse, source 3MF, F3D design file, photos).",effect2:"The archive row stays in the database so Quick Stats keeps the filament, time, cost, and energy contribution — same as the single-archive delete default.",effect3:'Tick "Also remove from statistics" below to drop the Quick Stats contribution too (matches the single-archive delete option). That path is irreversible.',effect4:"Reprinting an archive refreshes its age clock, so archives you still use are safe.",purgeStatsLabel:"Also remove from statistics",purgeStatsHint:"Drops the matching archives from Quick Stats (filament, time, cost, energy). Without this, Quick Stats keeps every contribution and only the files leave disk.",previewLoading:"Checking how many archives match…",previewFailed:"Could not preview the purge.",previewSummary:"{{count}} archives · {{size}} would be removed",andMore:"…and {{count}} more",warning:"Files are removed from disk and cannot be restored. Download or favourite anything you want to keep before continuing.",confirmCta:"Remove {{count}} archive(s)",purging:"Removing…",toast:{success:"Removed {{count}} archive(s).",failed:"Could not purge archives."}},archiveAutoPurge:{enableLabel:"Auto-purge old archives",enableDescription:"Once per day, hides archives from the listings and removes their files from disk when they have not been printed within the threshold. Reprinting an archive resets the clock.",ageLabel:"Auto-delete archives not printed in the last",ageDescription:"Minimum 7 days, maximum 10 years. Based on the most recent print completion — reprinting an archive refreshes its age. Removes the 3MF, thumbnail, timelapse, source 3MF, F3D, and photos.",days:"days",purgeStatsLabel:"Also remove from statistics",purgeStatsDescription:"When enabled, the daily sweeper also drops each purged archive from Quick Stats (filament, time, cost, energy). Default off — Quick Stats keeps the contribution, only the files leave disk.",runNow:"Purge archives now",saveFailed:"Could not save auto-purge settings."},cameraTokens:{title:"Camera API Tokens",navTitle:"Camera API tokens",description:"Long-lived tokens for embedding the camera stream into Home Assistant, Frigate, kiosks, or any other tool that needs a stable URL. Each token is camera-stream-only and can be revoked at any time.",loading:"Loading…",confirmRevoke:{title:"Revoke this token?",body:'Any device using "{{name}}" will lose access immediately. This cannot be undone.',cancel:"Cancel",confirm:"Revoke"},create:{title:"Create new token",nameLabel:"Token name",namePlaceholder:"e.g. Home Assistant",daysLabel:"Days until expiry",submit:"Create",hint:"Maximum lifetime is 365 days. The token value is shown only once on creation — copy it now."},created:{title:"Token created — copy it now",warning:"This is the only time this token will be visible. After you close this dialog you can never view it again.",copy:"Copy",dismiss:"I've saved it"},list:{myTitle:"My tokens",allTitle:"All users (admin view)",empty:"No tokens yet.",name:"Name",owner:"Owner",prefix:"Prefix",created:"Created",expires:"Expires",lastUsed:"Last used",revoke:"Revoke",expired:"Expired"},toast:{created:"Token created",createFailed:"Failed to create token",revoked:"Token revoked",revokeFailed:"Failed to revoke token",loadFailed:"Failed to load tokens",copied:"Copied to clipboard",copyFailed:"Copy failed — select and copy manually"}},forecast:{title:"Forecast",noSpools:"No active spools found. Add spools to your inventory to see forecast data.",noUsageData:"No usage data available — cannot project stock timeline.",sku:"SKU",material:"Material",stock:"Stock",dailyRate:"Rate",daysLeft:"Days Left",emptyBy:"Empty By",reorderBy:"Reorder By",actions:"Actions",trend:"Trend",estimated:"Est.",noData:"No data",timeframe:"Timeframe",chartTitle:"Projected Stock — Top 5 Materials",dashedLinesROP:"Dashed lines = reorder points",stockLevel:"Stock Level",reorderPoint:"Reorder Point",safetyMargin:"Safety Margin",trendLegend:"Trend (history-based, 95% service level)",estimatedLegend:"Estimated (weight delta)",noDataLegend:"No data",ropLabel:"ROP",ssLabel:"SS",safetyStockLegend:"Safety stock",stockArrivalLegend:"Stock arrival",stockoutLegend:"Stockout",alertCount_one:"{{count}} alert",alertCount_other:"{{count}} alerts",order:"Order",save:"Save",cancel:"Cancel",settingsSaved:"Settings saved",failedSaveSettings:"Failed to save settings",globalLeadTimeSaved:"Global lead time saved",globalLeadTime:"Global lead time",globalLeadTimeHint:"Global lead time floor — used in reorder point calculation for all SKUs",skuLeadTimeOverride:"SKU Lead Time Override",skuLeadTimeHint:"0 = use global lead time. Set >0 to override for this SKU.",safetyMarginLabel:"Safety Margin",effectiveLeadTime:"Effective Lead Time",effectiveLeadTimeHint:"max(global {{global}}d, SKU {{sku}}d)",reorderPointHint:"d̄ × LT + safety margin — order when stock hits this level",safetyMarginHint:"Statistical safety stock (z=1.65 × σ × √LT) + user-defined buffer",safetyMarginHintDays:"Buffer added on top of statistical safety stock.{{approx}}",safetyMarginHintDaysApprox:" ≈ {{g}}g at current rate.",safetyMarginHintG:"Fixed weight buffer added on top of statistical safety stock.{{approx}}",safetyMarginHintGApprox:" ≈ {{days}}d at current rate.",individualSpools:"Individual spools",labelWeight:"Label",spoolCount_one:"{{count}} spool",spoolCount_other:"{{count}} spools",stockBreakRisk:"Stock break risk",stockBreakDetail:"{{days}}d remaining, lead time {{lt}}d.",stockBreakBefore:"Stock break before replenishment",reorderNow:"Reorder now",reorderTriggerPassed:"Trigger date {{date}} has passed.",shoppingList:"Shopping List",shoppingListItems_one:"({{count}} item)",shoppingListItems_other:"({{count}} items)",shoppingListEmpty:"Shopping list is empty. Click the cart icon on any row to add items.",addToCart:"Add to shopping list",alertsSnoozed:"Mute alerts for this SKU",alertsEnabled:"Unmute alerts for this SKU",addedToCart:"Added to shopping list",failedAddItem:"Failed to add item",listView:"List",logisticsView:"Logistics",qty:"Qty",weight:"Weight",leadTime:"Lead Time",expectedRestock:"Expected Restock",status:"Status",note:"Note",pending:"Pending",purchased:"Purchased",received:"Received",markPurchased:"Mark as purchased",markReceived:"Mark as received — adds spools to Stock inventory",resetToPending:"Reset to pending",remove:"Remove",clearAll:"Clear all",downloadCsv:"CSV",addToCartTitle:"Add to Shopping List",byQuantity:"By Quantity",byDuration:"By Duration",numberOfSpools:"Number of spools",lastHowManyDays:"Should last how many days?",noUsageQty:"No usage data — quantity set to 1.",noteOptional:"Note (optional)",notePlaceholder:"e.g. for project X, urgent…",addNSpools_one:"Add {{count}} spool",addNSpools_other:"Add {{count}} spools",onArrival:"On Arrival",stockBreakIn:"Stock break in {{days}}d.",stockRunsOutBefore:"Stock runs out before the {{lt}}d lead time elapses.",atRate:"At {{rate}}g/day you need",moreSpools_one:"{{count}} more spool",moreSpools_other:"{{count}} more spools",bridgeGap:"to bridge the gap.",noReadAccess:"You do not have permission to view inventory forecasts.",noWriteAccess:"You do not have permission to modify forecast settings."}},ype={nav:{printers:"Drucker",archives:"Archiv",queue:"Druckwarteschlange",stats:"Statistiken",profiles:"Profile",maintenance:"Wartung",projects:"Projekte",inventory:"Filament",files:"Dateimanager",makerworld:"MakerWorld",notifications:"Benachrichtigungen",settings:"Einstellungen",system:"System",collapseSidebar:"Seitenleiste einklappen",expandSidebar:"Seitenleiste ausklappen",update:"Aktualisieren",updateAvailable:"Update verfügbar: v{{version}}",updateAvailableBanner:"Version {{version}} ist verfügbar!",viewUpdate:"Update anzeigen",viewOnGithub:"Auf GitHub ansehen",keyboardShortcuts:"Tastaturkürzel (?)",switchToLight:"Zum hellen Modus wechseln",switchToDark:"Zum dunklen Modus wechseln",switchToSystem:"Zum Systemmodus wechseln",smartSwitches:"Smart Switches",logout:"Abmelden",installApp:"App installieren",installAppSuccess:"Bambuddy wurde installiert"},common:{save:"Speichern",saving:"Speichern...",cancel:"Abbrechen",delete:"Löschen",edit:"Bearbeiten",add:"Hinzufügen",close:"Schließen",confirm:"Bestätigen",loading:"Lädt...",error:"Fehler",errorLoading:"Fehler beim Laden",retry:"Erneut versuchen",success:"Erfolg",warning:"Warnung",enabled:"Aktiviert",disabled:"Deaktiviert",yes:"Ja",no:"Nein",on:"An",off:"Aus",all:"Alle",none:"Keine",search:"Suchen",filter:"Filtern",sort:"Sortieren",refresh:"Aktualisieren",download:"Herunterladen",upload:"Hochladen",uploading:"Hochladen...",uploadFailed:"Hochladen fehlgeschlagen",actions:"Aktionen",status:"Status",name:"Name",description:"Beschreibung",date:"Datum",time:"Zeit",hours:"Stunden",minutes:"Minuten",seconds:"Sekunden",days:"Tage",enable:"Aktivieren",disable:"Deaktivieren",permissions:"Berechtigungen",noPrinters:"Keine Drucker konfiguriert",noData:"Keine Daten verfügbar",linkNotFound:"Link nicht gefunden",required:"Erforderlich",optional:"Optional",dismiss:"Schließen",apply:"Anwenden",reset:"Zurücksetzen",export:"Exportieren",import:"Importieren",clear:"Leeren",selectAll:"Alle auswählen",deselectAll:"Auswahl aufheben",noChange:"— Keine Änderung —",unchanged:"Unverändert",unassigned:"Nicht zugewiesen",unknown:"Unbekannt",unknownError:"Unbekannter Fehler",today:"Heute",tomorrow:"Morgen",asap:"Sofort",overdue:"Überfällig",now:"Jetzt",collapse:"Einklappen",expand:"Ausklappen",viewArchive:"Archiv anzeigen",viewInFileManager:"Im Dateimanager anzeigen",addedBy:"Hinzugefügt von {{username}}",prints:"Drucke",more:"+{{count}} weitere",ascending:"Aufsteigend",descending:"Absteigend",back:"Zurück",copy:"Kopieren",copied:"Kopiert!",printer:"Drucker",remove:"Entfernen",type:"Typ",print:"Drucken",rename:"Umbenennen",move:"Verschieben",create:"Erstellen",duplicate:"Duplizieren",left:"Links",right:"Rechts"},printers:{addPreflight:{checking:"Verbindung wird geprüft...",warning:"Einige Verbindungsprüfungen sind fehlgeschlagen. Dieser Drucker wird möglicherweise als offline angezeigt. Prüfe die Punkte unten, behebe was möglich ist, oder speichere trotzdem.",back:"Zurück",saveAnyway:"Trotzdem speichern"},title:"Drucker",addPrinter:"Drucker hinzufügen",editPrinter:"Drucker bearbeiten",deletePrinter:"Drucker löschen",printerName:"Druckername",serialNumber:"Seriennummer",ipAddress:"IP-Adresse / Hostname",accessCode:"Zugangscode",model:"Modell",nozzleCount:"Düsenanzahl",autoArchive:"Automatische Archivierung",status:{available:"Verfügbar",idle:"Bereit",printing:"Druckt",paused:"Pausiert",offline:"Offline",problem:"Problem",error:"Fehler",finished:"Fertig",unknown:"Unbekannt"},temperatures:{nozzle:"Düse",bed:"Druckbett",chamber:"Kammer"},progress:"{{percent}}% abgeschlossen",timeRemaining:"Noch {{time}}",deleteConfirm:'Möchten Sie "{{name}}" wirklich löschen?',maintenanceOk:"Wartung OK",maintenanceWarning:"{{count}} Warnung",maintenanceWarning_plural:"{{count}} Warnungen",maintenanceDue:"{{count}} fällig",maintenanceDue_plural:"{{count}} fällig",sort:{name:"Name",status:"Status",model:"Modell",location:"Standort",ascending:"Aufsteigend sortieren",descending:"Absteigend sortieren"},cardSize:{small:"Kleine Karten",medium:"Mittlere Karten",large:"Große Karten",extraLarge:"Extra große Karten"},hideOffline:"Offline ausblenden",nextAvailable:"Nächster verfügbar",powerOn:"Einschalten",offlinePrintersWithPlugs:"Offline-Drucker mit Smart-Plugs",noPrintersConfigured:"Noch keine Drucker konfiguriert",search:"Drucker suchen...",noSearchResults:"Keine Drucker entsprechen deiner Suche oder deinen Filtern",filter:{allStatuses:"Alle Status",allLocations:"Alle Standorte"},toolbar:{filters:"Filter",view:"Ansicht",actions:"Aktionen"},readyToPrint:"Druckbereit",external:"Extern",extL:"Ext-L",extR:"Ext-R",deleteArchives:"Druckarchive löschen",noLabel:"Keine Bezeichnung",printPreview:"Druckvorschau",width:"Breite",height:"Höhe",noObjectsFound:"Keine Objekte gefunden",objectsLoadedOnPrintStart:"Objekte werden beim Druckstart geladen",willBeSkipped:"Wird übersprungen",name:"Name",serialCannotBeChanged:"Seriennummer kann nicht geändert werden",locationHelp:"Dient zur Gruppierung von Druckern und zum Filtern von Warteschlangenaufträgen",wifiSignal:{veryWeak:"Sehr schwach",weak:"Schwach",fair:"Ausreichend",good:"Gut",excellent:"Ausgezeichnet"},maintenanceUpToDate:"Alle Wartungen aktuell - Klicken zum Anzeigen",chamberLightOn:"Kammerbeleuchtung einschalten",chamberLightOff:"Kammerbeleuchtung ausschalten",files:"Dateien",browseFiles:"Druckerdateien durchsuchen",autoOffAfterPrint:"Automatisches Ausschalten nach Druck",autoOffExecuted:"Auto-off wurde ausgeführt - Drucker einschalten zum Zurücksetzen",hmsErrors:"HMS-Fehler",viewHmsErrors:"{{count}} HMS-Fehler anzeigen",resume:"Fortsetzen",pause:"Pausieren",stop:"Stoppen",camera:"Kamera",skipObject:"Objekt überspringen",reconnect:"Neu verbinden",forceRefresh:"Aktualisierung erzwingen",forceRefreshSuccess:"Aktualisierung angefordert",mqttDebug:"MQTT-Debug",printerInformation:"Druckerinformationen",copyToClipboard:"Kopieren",copied:"Kopiert!",state:"Zustand",wifiSignalLabel:"WLAN-Signal",developerMode:"Entwicklermodus",enabled:"Aktiviert",disabled:"Deaktiviert",addedOn:"Hinzugefügt",sdCard:"SD-Karte",inserted:"Eingelegt",notInserted:"Nicht eingelegt",totalPrintHours:"Druckstunden",activeNozzle:"Aktiv: {{nozzle}} Düse",nozzleRack:"Düsenhalter",nozzleDocked:"Angedockt",nozzleMounted:"Montiert",nozzleActive:"Aktiv",nozzleIdle:"Inaktiv",nozzleDiameter:"Durchmesser",nozzleType:"Typ",nozzleStatus:"Status",nozzleFilament:"Filament",nozzleWear:"Verschleiß",nozzleMaxTemp:"Max. Temp",nozzleSerial:"Seriennr.",nozzleHardenedSteel:"Gehärteter Stahl",nozzleStainlessSteel:"Edelstahl",nozzleTungstenCarbide:"Wolframkarbid",nozzleFlow:"Durchfluss",nozzleHighFlow:"Hoher Durchfluss",nozzleStandardFlow:"Standard",firmwareUpdate:"Firmware-Update",firmwareInstructions:"Gehen Sie auf dem Touchscreen des Druckers zu",firmwareNav:"Navigieren Sie zu",settings:"Einstellungen",firmware:"Firmware",discoverPrinters:"Drucker entdecken",searching:"Suche...",manualEntry:"Manuelle Eingabe",addFromCloud:"Aus Cloud hinzufügen",toast:{printerDeleted:"Drucker gelöscht",missingSpoolAssignment:"Druck gestartet auf {{printer}}. Fehlende Spulenzuordnung für: {{slots}}",printerAdded:"Drucker hinzugefügt",printerUpdated:"Drucker aktualisiert",failedToDelete:"Drucker konnte nicht gelöscht werden",failedToAdd:"Drucker konnte nicht hinzugefügt werden",connectionFailedNotAdded:"Keine Verbindung zum Drucker möglich. Prüfen Sie IP-Adresse, Seriennummer und Zugangscode und stellen Sie sicher, dass der Nur-LAN-Modus aktiv ist. Der Drucker wurde nicht hinzugefügt.",failedToUpdate:"Drucker konnte nicht aktualisiert werden",commandSent:"Befehl gesendet",failedToSendCommand:"Befehl konnte nicht gesendet werden",turnedOn:"{{name}} eingeschaltet",failedToPowerOn:"{{name}} konnte nicht eingeschaltet werden",scriptTriggered:"Skript ausgelöst",printStopped:"Druck gestoppt",printPaused:"Druck pausiert",printResumed:"Druck fortgesetzt",referenceDeleted:"Referenz gelöscht",detectionAreaSaved:"Erkennungsbereich gespeichert",failedToRunScript:"Skript konnte nicht ausgeführt werden",failedToStopPrint:"Druck konnte nicht gestoppt werden",failedToPausePrint:"Druck konnte nicht pausiert werden",failedToResumePrint:"Druck konnte nicht fortgesetzt werden",failedToControlChamberLight:"Kammerbeleuchtung konnte nicht gesteuert werden",failedToSetSpeed:"Druckgeschwindigkeit konnte nicht eingestellt werden",failedToUpdateSetting:"Einstellung konnte nicht aktualisiert werden",failedToSkipObjects:"Objekte konnten nicht übersprungen werden",failedToRereadRfid:"RFID konnte nicht erneut gelesen werden",failedToCheckPlate:"Platte konnte nicht überprüft werden",failedToUpdateLabel:"Bezeichnung konnte nicht aktualisiert werden",failedToDeleteReference:"Referenz konnte nicht gelöscht werden",failedToSaveDetectionArea:"Erkennungsbereich konnte nicht gespeichert werden",plateCheckEnabled:"Plattenprüfung aktiviert",plateCheckDisabled:"Plattenprüfung deaktiviert",calibrationSaved:"Kalibrierung gespeichert!",calibrationFailed:"Kalibrierung fehlgeschlagen",rfidRereadInitiated:"RFID-Neueinlesen gestartet",loadInitiated:"Filament wird geladen…",unloadInitiated:"Filament wird entladen…",failedToLoad:"Filament konnte nicht geladen werden",failedToUnload:"Filament konnte nicht entladen werden"},connection:{connected:"Verbunden",offline:"Offline"},plateStatus:{markCleared:"Platte als freigegeben markieren",cleared:"Platte freigegeben",notCleared:"Platte nicht freigegeben",inUse:"Platte in Benutzung"},queue:{inQueue:"{{count}} Druck in Warteschlange",inQueue_plural:"{{count}} Drucke in Warteschlange"},controls:"Steuerung",rfid:{reread:"RFID neu lesen"},ams:{load:"Laden",unload:"Entladen"},bedJog:{title:"Druckbett bewegen",bed:"Bett",step:"Schritt (mm)",up:"Platte hoch",down:"Platte runter",disabledWhilePrinting:"Während des Drucks deaktiviert",notHomedTitle:"Drucker ist nicht referenziert",notHomedMessage:"Der Drucker wurde seit dem letzten Druck nicht referenziert. Führen Sie zuerst die automatische Referenzfahrt aus (parkt den Werkzeugkopf und referenziert dann X, Y und Z) oder bewegen Sie trotzdem — die Software-Endschalter werden dabei umgangen.",homeZ:"Automatische Referenzfahrt",moveAnyway:"Trotzdem bewegen",homingStarted:"Drucker wird automatisch referenziert…"},permission:{noAdd:"Sie haben keine Berechtigung, Drucker hinzuzufügen",noEdit:"Sie haben keine Berechtigung, Drucker zu bearbeiten",noDelete:"Sie haben keine Berechtigung, Drucker zu löschen",noControl:"Sie haben keine Berechtigung, Drucker zu steuern",noFiles:"Sie haben keine Berechtigung, auf Druckerdateien zuzugreifen",noAmsRfid:"Sie haben keine Berechtigung, AMS-RFID erneut zu lesen",noSmartPlugControl:"Sie haben keine Berechtigung, Smart Plugs zu steuern",noCamera:"Sie haben keine Berechtigung, Kameras anzuzeigen"},modal:{addTitle:"Drucker hinzufügen",editTitle:"Drucker bearbeiten",myPrinter:"Mein Drucker",selectModel:"Modell auswählen...",locationGroup:"Standort / Gruppe (optional)",locationPlaceholder:"z.B. Werkstatt, Büro, Keller",autoArchiveLabel:"Abgeschlossene Drucke automatisch archivieren",fromPrinterSettings:"Aus Druckereinstellungen",modelOptional:"Modell (optional)",saveChanges:"Änderungen speichern"},skipObjects:{tooltip:"Objekte überspringen",onlyWhilePrinting:"Objekte überspringen (nur während des Drucks)",requiresMultiple:"Objekte überspringen (erfordert 2+ Objekte)",title:"Objekte überspringen",matchIdsInfo:"IDs mit Drucker-Display abgleichen",printerShowsIds:"Der Druckerbildschirm zeigt Objekt-IDs auf der Bauplatte",skipSelected:"Ausgewählte überspringen",skipping:"Überspringe...",noObjectsSelected:"Keine Objekte ausgewählt",selectObjectsToSkip:"Wählen Sie Objekte aus, die Sie vom aktuellen Druck überspringen möchten",skipped:"übersprungen",objectsSkipped:"Objekte übersprungen",activeCount:"{{count}} aktiv",waitForLayer:"Warten Sie auf Schicht 2+ zum Überspringen von Objekten (aktuell Schicht {{layer}})",skip:"Überspringen",confirmTitle:"Objekt überspringen?",confirmMessage:'Möchten Sie "{{name}}" wirklich überspringen? Dies kann nicht rückgängig gemacht werden.'},confirm:{deleteTitle:"Drucker löschen",deleteMessage:'Möchten Sie "{{name}}" wirklich löschen? Alle Verbindungseinstellungen werden entfernt.',deleteArchivesNote:"Der gesamte Druckverlauf für diesen Drucker wird dauerhaft gelöscht.",keepArchivesNote:"Der Druckverlauf wird beibehalten, aber nicht mehr mit diesem Drucker verknüpft.",stopTitle:"Druck stoppen",stopMessage:'Möchten Sie den aktuellen Druck auf "{{name}}" wirklich stoppen? Der Druckauftrag wird abgebrochen.',stopButton:"Druck stoppen",pauseTitle:"Druck pausieren",pauseMessage:'Möchten Sie den aktuellen Druck auf "{{name}}" wirklich pausieren?',pauseButton:"Druck pausieren",resumeTitle:"Druck fortsetzen",resumeMessage:'Möchten Sie den Druck auf "{{name}}" fortsetzen?',resumeButton:"Druck fortsetzen",powerOnTitle:"Drucker einschalten",powerOnMessage:'Möchten Sie die Stromversorgung für "{{name}}" wirklich EINSCHALTEN?',powerOnButton:"Einschalten",powerOffTitle:"Drucker ausschalten",powerOffMessage:'Möchten Sie die Stromversorgung für "{{name}}" wirklich AUSSCHALTEN?',powerOffWarning:'WARNUNG: "{{name}}" druckt gerade! Möchten Sie die Stromversorgung wirklich AUSSCHALTEN? Dies unterbricht den Druck und kann den Drucker beschädigen.',powerOffButton:"Ausschalten",haToggleTitle:'"{{name}}" umschalten',haToggleMessage:"Home-Assistant-Entität {{entity}} umschalten? Das kann die Stromversorgung ausschalten, falls sie gerade an ist.",haToggleWarning:'WARNUNG: "{{name}}" druckt gerade! Umschalten von {{entity}} kann die Stromversorgung trennen und den Druck abbrechen. Fortfahren?',haToggleButton:"Umschalten"},bulk:{select:"Auswählen",selectAll:"Alle auswählen",selectByLocation:"Nach Standort auswählen",selected:"{{count}} ausgewählt",actions:{stop:"Stoppen",pause:"Pausieren",resume:"Fortsetzen",clearPlate:"Druckbett leeren",clearHMS:"Benachrichtigungen löschen"},confirm:{stopTitle:"{{count}} Drucke stoppen",stopMessage:"Dies wird aktive Drucke auf {{count}} Drucker(n) abbrechen. Diese Aktion kann nicht rückgängig gemacht werden.",stopButton:"Alle stoppen",pauseTitle:"{{count}} Drucke pausieren",pauseMessage:"Dies wird aktive Drucke auf {{count}} Drucker(n) pausieren.",pauseButton:"Alle pausieren",clearPlateTitle:"{{count}} Druckbetten leeren",clearPlateMessage:"Dies wird das Druckbett auf {{count}} Drucker(n) leeren und kann wartende Aufträge starten.",clearPlateButton:"Alle leeren"},success:"{{action}} auf {{count}} Drucker(n) abgeschlossen",partial:"{{succeeded}} erfolgreich, {{failed}} fehlgeschlagen",noneApplicable:"Keine ausgewählten Drucker sind im richtigen Zustand für diese Aktion",selectByState:"Nach Status auswählen"},discovery:{title:"Drucker entdecken",searching:"Suche...",scanning:"Scanne...",scanProgress:"Scanne... {{scanned}}/{{total}}",foundPrinters:"{{count}} Drucker gefunden",noPrintersFound:"Keine Drucker gefunden",noPrintersFoundSubnet:"Keine Drucker im angegebenen Subnetz gefunden.",noPrintersFoundNetwork:"Keine Drucker im Netzwerk gefunden.",allConfigured:"Alle erkannten Drucker sind bereits konfiguriert.",alreadyAdded:"Bereits hinzugefügt",select:"Auswählen",manualEntry:"Manuelle Eingabe",addFromCloud:"Aus Cloud hinzufügen",subnetToScan:"Zu scannendes Subnetz",dockerNote:"Docker erkannt. Geben Sie das Subnetz Ihres Druckers in CIDR-Notation ein. Erfordert network_mode: host in docker-compose.yml.",scanSubnet:"Subnetz nach Druckern scannen",discoverNetwork:"Drucker im Netzwerk suchen",scanningSubnet:"Subnetz wird nach Bambu-Druckern gescannt...",scanningNetwork:"Netzwerk wird gescannt...",serialRequired:"Seriennummer erforderlich",unknown:"Unbekannt",failedToStart:"Erkennung konnte nicht gestartet werden",customSubnetOption:"Eigenes Subnetz...",customSubnetLabel:"Eigenes Subnetz (CIDR)",customSubnetNote:"Wähle ein eigenes Subnetz, wenn dein Drucker in einem anderen Netzwerk als dieser Server steht. Die Ports FTP (990) und MQTT (8883) müssen über die Routinggrenze erreichbar sein."},drying:{start:"Trocknung starten",stop:"Trocknung stoppen",temperature:"Temperatur",duration:"Dauer",hours:"Stunden",timeRemaining:"{{time}} verbleibend",active:"Trocknung",notSupported:"Trocknung nicht unterstützt",powerRequired:"AMS-Netzteil anschließen, um Trocknung zu aktivieren",startingDrying:"Trocknung wird gestartet...",stoppingDrying:"Trocknung wird gestoppt...",rotateTray:"Spule während der Trocknung drehen"},filaments:"Filamente",openCameraOverlay:"Kamera-Overlay öffnen",openCameraWindow:"Kamera in neuem Fenster öffnen",firmwareUpdateAvailable:"Firmware-Update verfügbar: {{current}} → {{latest}}",firmwareUpToDate:"Firmware {{version}} — Aktuell",firmwareUpdateButton:"Aktualisieren",plateDetection:{noPermission:"Sie haben keine Berechtigung, Drucker zu aktualisieren",enabledClick:"Plattenprüfung aktiviert - Klicken zum Deaktivieren",disabledClick:"Plattenprüfung deaktiviert - Klicken zum Aktivieren",manageCalibration:"Platten-Erkennungskalibrierung verwalten",calibrationRequired:"Kalibrierung erforderlich",calibrationInstructions:"Bitte stellen Sie sicher, dass die Druckplatte <strong>vollständig leer</strong> ist, und klicken Sie dann auf Kalibrieren.",calibrationDescription:"Die Kalibrierung erfasst ein Referenzbild der leeren Platte. Zukünftige Prüfungen vergleichen mit dieser Referenz, um Objekte zu erkennen.",calibrationTip:"<strong>Tipp:</strong> Sie können bis zu 5 Kalibrierungen für verschiedene Platten speichern. Das System verwendet automatisch die beste Übereinstimmung bei der Prüfung.",plateEmpty:"Platte erscheint leer",objectsDetected:"Objekte auf Platte erkannt",confidence:"Konfidenz",difference:"Differenz",analysisPreview:"Analysevorschau:",analysisLegend:"Grüner Rahmen = Erkennungsbereich, Rote Überlagerung = Unterschiede zur Kalibrierung",savedReferences:"Gespeicherte Referenzen ({{count}}/{{max}})",deleteReference:"Referenz löschen",labelPlaceholder:"Bezeichnung...",clickToEdit:"{{label}} - Zum Bearbeiten klicken",clickToAddLabel:"Zum Hinzufügen einer Bezeichnung klicken"},speed:{title:"Druckgeschwindigkeit",silent:"Leise (50%)",standard:"Standard (100%)",sport:"Sport (124%)",ludicrous:"Ludicrous (166%)"},airduct:{title:"Luftkanal-Modus",cooling:"Kühlen",heating:"Heizen"},noSdCard:"Keine SD",door:{open:"Offen",closed:"Zu"},fans:{partCooling:"Bauteilkühlung",auxiliary:"Hilfsventilator",chamber:"Kammerventilator"},clickToViewHmsErrors:"Klicken, um HMS-Fehler anzuzeigen",estimatedCompletion:"Geschätzte Fertigstellungszeit",plateNumber:"Platte {{number}}",slotOptions:"Slot-Optionen",amsPopup:{friendlyName:"AMS-Name",friendlyNamePlaceholder:"z. B. AMS-Anzeigename",serialNumber:"Seriennummer",firmwareVersion:"Firmware",save:"Speichern",clear:"Löschen",noEditPermission:"Sie haben keine Berechtigung, AMS-Einheiten umzubenennen"},firmwareModal:{title:"Firmware-Update",titleUpToDate:"Firmware-Info",currentVersion:"Aktuell:",latestVersion:"Neueste:",releaseNotes:"Versionshinweise",checkingPrereqs:"Prüfe Voraussetzungen...",sdCardReady:"SD-Karte bereit. Klicken Sie unten, um die Firmware hochzuladen.",uploadedSuccess:"Firmware auf SD-Karte hochgeladen!",applyInstructions:"So wenden Sie das Update auf Ihrem Drucker an:",step1:"Gehen Sie auf dem Touchscreen des Druckers zu <strong>Einstellungen</strong>",step2:"Navigieren Sie zu <strong>Firmware</strong>",step3:"Wählen Sie <strong>Update von SD-Karte</strong>",step4:"Das Update dauert 10-20 Minuten",done:"Fertig",starting:"Starte...",uploadFirmware:"Firmware hochladen",uploadFailed:"Upload fehlgeschlagen: {{error}}",uploadedToast:"Firmware hochgeladen! Starten Sie das Update vom Druckerbildschirm.",availableVersions:"Verfügbare Versionen",usable:"Installierbar",unavailable:"Nicht verfügbar",installed:"Installiert",newerBadge:"neuer",olderBadge:"älter",currentBadge:"aktuell"},accessCodePlaceholder:"Leer lassen, um den aktuellen zu behalten",roi:{title:"Erkennungsbereich (ROI)",xStart:"X-Start",yStart:"Y-Start",width:"Breite",height:"Höhe",instruction:"Passen Sie den Erkennungsbereich an, um sich auf die Druckplatte zu konzentrieren. Der grüne Rahmen in der Vorschau zeigt den aktuellen Bereich."},developerModeWarning:"Der Entwickler-LAN-Modus ist nicht aktiviert auf: {{names}}. Einige Funktionen funktionieren möglicherweise nicht.",howToEnable:"Aktivieren",incompatibleFile:"Diese Datei wurde für {{slicedFor}} geslicet, aber dieser Drucker ist ein {{printerModel}}",dropNotPrintable:"Nur .gcode- und .gcode.3mf-Dateien können gedruckt werden",dropToPrint:"Zum Drucken ablegen",cannotPrint:"Drucker beschäftigt"},archives:{title:"Druckarchiv",searchPlaceholder:"Archiv durchsuchen...",filterByPrinter:"Nach Drucker filtern",filterByStatus:"Nach Status filtern",sortBy:"Sortieren nach",sortNewest:"Neueste zuerst",sortOldest:"Älteste zuerst",sortName:"Name",sortDuration:"Dauer",sortLargest:"Größte zuerst",sortSmallest:"Kleinste zuerst",sortSize:"Größe",noArchives:"Keine Archive gefunden",noArchivesSearch:"Keine Archive entsprechen Ihrer Suche",originalPrintNotVisible:"Ursprünglicher Druck nicht sichtbar - versuchen Sie, die Filter zu löschen",noArchivesYet:"Noch keine Archive",prints:"Drucke",pagination:{showing:"Zeige",to:"bis",of:"von",show:"Zeige",page:"Seite",all:"Alle"},loadingArchives:"Lade Archive...",releaseToUpload:"Loslassen zum Hochladen",showAll:"Alle anzeigen",showFavoritesOnly:"Nur Favoriten anzeigen",gridView:"Rasteransicht",listView:"Listenansicht",calendarView:"Kalenderansicht",logView:"Druckprotokoll",manageTags:"Tags verwalten",showFailedPrints:"Fehlgeschlagene Drucke anzeigen",hideFailedPrints:"Fehlgeschlagene Drucke ausblenden",hideDuplicates:"Duplikate ausblenden",viewOriginalPrint:"Klicken, um den ursprünglichen Druck anzuzeigen (#{{id}})",printTime:"Druckzeit",filamentUsed:"Verbrauchtes Filament",cost:"Kosten",reprint:"Drucken",preview:"Vorschau",deleteArchive:"Archiv löschen",deleteConfirm:"Möchten Sie dieses Archiv wirklich löschen?",favorite:"Favorit",unfavorite:"Aus Favoriten entfernen",viewDetails:"Details anzeigen",status:{completed:"Abgeschlossen",failed:"Fehlgeschlagen",stopped:"Gestoppt"},toast:{source3mfAttached:"Quell-3MF angehängt: {{filename}}",failedUploadSource3mf:"Fehler beim Hochladen der Quell-3MF",source3mfRemoved:"Quell-3MF entfernt",failedRemoveSource3mf:"Fehler beim Entfernen der Quell-3MF",f3dAttached:"F3D angehängt: {{filename}}",failedUploadF3d:"Fehler beim Hochladen der F3D",f3dRemoved:"F3D entfernt",failedRemoveF3d:"Fehler beim Entfernen der F3D",timelapseAttached:"Zeitraffer angehängt: {{filename}}",timelapseAlreadyAttached:"Zeitraffer bereits angehängt",noMatchingTimelapse:"Kein passender Zeitraffer gefunden",failedScanTimelapse:"Fehler beim Suchen nach Zeitraffer",failedAttachTimelapse:"Fehler beim Anhängen des Zeitraffers",timelapseRemoved:"Zeitraffer entfernt",failedRemoveTimelapse:"Fehler beim Entfernen des Zeitraffers",timelapseUploaded:"Zeitraffer hochgeladen: {{filename}}",failedUploadTimelapse:"Fehler beim Hochladen des Zeitraffers",archiveDeleted:"Archiv gelöscht",failedDeleteArchive:"Fehler beim Löschen des Archivs",addedToFavorites:"Zu Favoriten hinzugefügt",removedFromFavorites:"Aus Favoriten entfernt",projectUpdated:"Projekt aktualisiert",failedUpdateProject:"Fehler beim Aktualisieren des Projekts",linkCopied:"Link in die Zwischenablage kopiert",failedCopyLink:"Fehler beim Kopieren des Links",photoDeleted:"Foto gelöscht",failedDeletePhoto:"Fehler beim Löschen des Fotos",failedDeleteArchives:"Fehler beim Löschen der Archive",failedUpdateFavorites:"Fehler beim Aktualisieren der Favoriten",exportDownloaded:"Export heruntergeladen",exportFailed:"Export fehlgeschlagen"},menu:{print:"Drucken",schedule:"Planen",openInBambuStudio:"Im Slicer öffnen",slice:"Slicen",externalLink:"Externer Link",viewOnMakerWorld:"Auf MakerWorld ansehen",preview3d:"3D-Vorschau",viewTimelapse:"Zeitraffer ansehen",scanForTimelapse:"Nach Zeitraffer suchen",uploadTimelapse:"Zeitraffer hochladen",removeTimelapse:"Zeitraffer entfernen",downloadSource3mf:"Quell-3MF herunterladen",uploadSource3mf:"Quell-3MF hochladen",replaceSource3mf:"Quell-3MF ersetzen",removeSource3mf:"Quell-3MF entfernen",uploadF3d:"F3D hochladen",replaceF3d:"F3D ersetzen",downloadF3d:"F3D herunterladen",removeF3d:"F3D entfernen",download:"Herunterladen",copyDownloadLink:"Download-Link kopieren",qrCode:"QR-Code",viewPhotos:"Fotos ansehen",viewPhotosCount:"Fotos ansehen ({{count}})",projectPage:"Projektseite",addToFavorites:"Zu Favoriten hinzufügen",removeFromFavorites:"Aus Favoriten entfernen",edit:"Bearbeiten",printLog:"Druckprotokoll",goToProject:"Zum Projekt: {{name}}",addToProject:"Zu Projekt hinzufügen",removeFromProject:"Aus Projekt entfernen",loading:"Laden...",noProjectsAvailable:"Keine Projekte verfügbar",searchProjects:"Projekte suchen…",select:"Auswählen",deselect:"Abwählen",delete:"Löschen"},permission:{noReprint:"Sie haben keine Berechtigung, dieses Archiv erneut zu drucken",noAddToQueue:"Sie haben keine Berechtigung, zur Warteschlange hinzuzufügen",noUpdateArchives:"Sie haben keine Berechtigung, Archive zu aktualisieren",noUploadFiles:"Sie haben keine Berechtigung, Dateien hochzuladen",noDownload:"Sie haben keine Berechtigung, Archive herunterzuladen",noCopyLink:"Sie haben keine Berechtigung, Download-Links zu kopieren",noDelete:"Sie haben keine Berechtigung, dieses Archiv zu löschen",noCreate:"Sie haben keine Berechtigung, Archive zu erstellen"},platePicker:{title:"Platte zur Vorschau auswählen",hint:"Dieses Archiv enthält mehrere Platten. Wähle eine, um sie im GCode-Viewer zu öffnen.",plateLabel:"Platte {{index}}",objectCount:"{{count}} Objekt",objectCount_plural:"{{count}} Objekte",noGcode:"Dieses Archiv enthält keinen geschnittenen G-Code zur Vorschau. Öffne es zuerst in Bambu Studio zum Slicen."},card:{previousPlate:"Vorherige Platte",nextPlate:"Nächste Platte",plateNumber:"Platte {{index}}",moreOptions:"Rechtsklick für mehr Optionen",addToFavorites:"Zu Favoriten hinzufügen",removeFromFavorites:"Aus Favoriten entfernen",cancelled:"abgebrochen",failed:"fehlgeschlagen",duplicate:"Duplikat",duplicateTitle:"Dieses Modell wurde bereits zuvor gedruckt",openSource3mf:"Quell-3MF in Bambu Studio öffnen (Rechtsklick für mehr Optionen)",downloadF3d:"Fusion 360 Designdatei herunterladen",viewTimelapse:"Zeitraffer ansehen",viewPhoto:"1 Foto ansehen",viewPhotos:"{{count}} Fotos ansehen",openFolder:"Ordner öffnen: {{name}}",slicedFile:"Geslicte Datei - druckbereit",sourceFile:"Nur Quelldatei - keine AMS-Zuordnung verfügbar",gcode:"GCODE",source:"QUELLE",project:"Projekt: {{name}}",runsBadge:"{{count}} Drucke",runsBadgeTitle:"Insgesamt {{count}} Drucke — {{successful}} erfolgreich, {{failed}} fehlgeschlagen. Klicken, um das vollständige Druckprotokoll zu öffnen.",estimated:"Geschätzt: {{time}}",actual:"Tatsächlich: {{time}}",accuracy:"Genauigkeit: {{percent}}%",filament:"{{weight}} g",layer:"{{count}} Schicht",layers:"{{count}} Schichten",object:"{{count}} Objekt",objects:"{{count}} Objekte",slicedFor:"Geslict für {{model}}",uploadedBy:"Hochgeladen von",noPermissionReprint:"Sie haben keine Berechtigung, erneut zu drucken",noFileForReprint:"Keine 3MF-Datei verfügbar — die Datei konnte beim Aufzeichnen des Drucks nicht vom Drucker heruntergeladen werden",noPermissionEdit:"Sie haben keine Berechtigung, Archive zu bearbeiten",noPermissionDelete:"Sie haben keine Berechtigung, Archive zu löschen",reprint:"Drucken",schedulePrint:"Druck planen",schedule:"Planen",openInBambuStudio:"Im Slicer öffnen",openInBambuStudioToSlice:"Im Slicer öffnen zum Slicen",slice:"Slicen",externalLink:"Externer Link",makerWorld:"MakerWorld – {{designer}}",viewProject:"Projekt ansehen",noExternalLink:"Kein externer Link",preview3d:"3D-Vorschau",download:"Herunterladen",edit:"Bearbeiten",delete:"Löschen"},runLog:{title:"Druckprotokoll",modalTitle:"Druckprotokoll — {{name}}",modalTitleFallback:"dieses Archiv",empty:"Für dieses Archiv wurden noch keine Druckereignisse aufgezeichnet.",col:{date:"Datum",status:"Status",duration:"Dauer",filament:"Filament",cost:"Kosten"},status:{completed:"Abgeschlossen",failed:"Fehlgeschlagen",cancelled:"Abgebrochen",stopped:"Gestoppt",skipped:"Übersprungen",printing:"Druckt"}},modal:{deleteArchive:"Archiv löschen",deleteConfirm:'Möchten Sie "{{name}}" wirklich löschen? Diese Aktion kann nicht rückgängig gemacht werden.',deleteButton:"Löschen",deletePurgeStats:"Diesen Druck auch aus den Quick Stats entfernen (Filament, Zeit, Kosten, Energie)",removeSource3mf:"Quell-3MF entfernen",removeSource3mfConfirm:'Möchten Sie die Quell-3MF-Datei wirklich von "{{name}}" entfernen? Die ursprüngliche Slicer-Projektdatei wird gelöscht.',removeButton:"Entfernen",removeF3d:"F3D entfernen",removeF3dConfirm:'Möchten Sie die Fusion 360 Designdatei wirklich von "{{name}}" entfernen?',removeTimelapse:"Zeitraffer entfernen",removeTimelapseConfirm:'Möchten Sie das Zeitraffervideo wirklich von "{{name}}" entfernen?',timelapse:"{{name}} - Zeitraffer",selectTimelapse:"Zeitraffer auswählen",selectTimelapseDesc:"Keine automatische Übereinstimmung gefunden. Wählen Sie den Zeitraffer für diesen Druck:",deleteArchives:"Archive löschen",deleteArchivesConfirm:"Möchten Sie wirklich {{count}} Archiv(e) löschen? Diese Aktion kann nicht rückgängig gemacht werden.",deleteCount:"{{count}} löschen"},page:{title:"Archive",printsCount:"{{filtered}} von {{total}} Drucken",dropFilesHere:".3mf-Dateien hier ablegen",releaseToUpload:"Loslassen zum Hochladen",only3mfSupported:"Nur .3mf-Dateien werden unterstützt",close:"Schließen",selected:"{{count}} ausgewählt",selectAll:"Alle auswählen",tags:"Tags",project:"Projekt",favorite:"Favorit",delete:"Löschen",toggledFavorites:"Favoriten für {{count}} Archiv(e) umgeschaltet",failedUpdateFavorites:"Fehler beim Aktualisieren der Favoriten",archivesDeleted:"{{count}} Archiv(e) gelöscht",failedDeleteArchives:"Fehler beim Löschen der Archive",photoDeleted:"Foto gelöscht",failedDeletePhoto:"Fehler beim Löschen des Fotos"},list:{name:"Name",printer:"Drucker",date:"Datum",size:"Größe",actions:"Aktionen",hasTimelapse:"Hat Zeitraffer"},log:{date:"Datum",printName:"Druckname",printer:"Drucker",user:"Benutzer",status:"Status",duration:"Dauer",filament:"Filament",allPrinters:"Alle Drucker",allUsers:"Alle Benutzer",allStatuses:"Alle Status",cancelled:"Abgebrochen",skipped:"Übersprungen",dateFrom:"Von",dateTo:"Bis",noEntries:"Keine Druckprotokolleinträge gefunden",showing:"{{count}} von {{total}} Einträgen",rowsPerPage:"Zeilen",page:"Seite",prev:"Zurück",next:"Weiter",clearLog:"Protokoll löschen",clearLogTitle:"Druckprotokoll löschen",clearLogConfirm:"Alle Druckprotokolleinträge werden dauerhaft gelöscht. Archive und Warteschlangeneinträge sind nicht betroffen. Diese Aktion kann nicht rückgängig gemacht werden. Sind Sie sicher?",clearLogButton:"Alle löschen",cleared:"{{count}} Protokolleinträge gelöscht",clearFailed:"Druckprotokoll konnte nicht gelöscht werden"}},queue:{filamentShort:{rowBadge:"Filament fuer die zugewiesene Spule reicht nicht",rowTooltip:"Der Dispatcher hat diese Position markiert. Klicke auf Play, um den Pro-Slot-Fehlbestand zu sehen und zu entscheiden, ob trotzdem gedruckt werden soll.",confirmTitle:"Filament reicht nicht",confirmIntro:"Die zugewiesene Spule kann mindestens einen Slot nicht versorgen. Trotzdem drucken?",lineItem:"Slot {{slot}}: benoetigt {{required}} g, {{remaining}} g verbleibend",unknown:"unbekannt",printAnyway:"Trotzdem drucken"},title:"Druckwarteschlange",subtitle:"Planen und verwalten Sie Ihre Druckaufträge",addToQueue:"Zur Warteschlange hinzufügen",print:"Drucken",reprint:"Erneut drucken",schedulePrint:"Druck planen",editQueueItem:"Warteschlangeneintrag bearbeiten",printToPrinters:"Auf {{count}} Druckern drucken",queueToPrinters:"Zu {{count}} Druckern hinzufügen",queueSelectedPlates:"{{count}} Platten in die Warteschlange",selectAllPlates:"Alle {{count}} Platten auswählen",deselectAll:"Alle abwählen",printQueued:"Druck in Warteschlange",itemsQueued:"{{count}} Einträge in Warteschlange",sending:"Wird gesendet...",sendingProgress:"Sende {{current}}/{{total}}...",adding:"Wird hinzugefügt...",addingProgress:"Füge hinzu {{current}}/{{total}}...",savingProgress:"Speichere {{current}}/{{total}}...",clearQueue:"Warteschlange leeren",clearHistory:"Verlauf löschen",emptyQueue:"Warteschlange ist leer",position:"Position",scheduledTime:"Geplante Zeit",moveUp:"Nach oben",moveDown:"Nach unten",startNow:"Jetzt starten",printingInProgress:"Druck läuft...",viewArchive:"Archiv anzeigen",viewInFileManager:"Im Dateimanager anzeigen",itemCount:"{{count}} Element",itemCount_plural:"{{count}} Elemente",dragToReorder:"Ziehen zum Neuordnen (nur Sofort)",reorderHint:"Position betrifft nur Sofort-Elemente. Geplante Elemente werden zur festgelegten Zeit ausgeführt.",sjf:{label:"SJF",tooltip:"Kürzester Auftrag zuerst — Scheduler bevorzugt kürzere Drucke"},addedBy:"Hinzugefügt von {{name}}",nextInQueue:"Nächster in der Warteschlange",clearPlateSuccess:"Druckplatte freigegeben — bereit für nächsten Druck",plateNumber:"Platte {{index}}",quantity:"Menge",quantityHint:"Erstellt {{count}} Warteschlangeneinträge",activeBatches:"Aktive Stapel",batchProgress:"{{completed}} von {{total}} abgeschlossen",cancelBatch:"Verbleibende abbrechen",batchCancelled:"Verbleibende Stapeleinträge abgebrochen",cancelBatchConfirmTitle:"Stapel abbrechen",cancelBatchConfirmMessage:"Alle verbleibenden ausstehenden Einträge in diesem Stapel abbrechen?",batch:"Stapel",sections:{currentlyPrinting:"Aktuell druckend",queued:"In Warteschlange",history:"Verlauf"},status:{pending:"Ausstehend",waiting:"Wartend",printing:"Druckt",paused:"Pausiert",completed:"Abgeschlossen",failed:"Fehlgeschlagen",skipped:"Übersprungen",cancelled:"Abgebrochen"},summary:{printing:"Druckt",queued:"In Warteschlange",totalTime:"Gesamte Wartezeit",totalWeight:"Gesamtgewicht der Warteschlange",history:"Verlauf"},filter:{allPrinters:"Alle Drucker",unassigned:"Nicht zugewiesen",allStatus:"Alle Status",allLocations:"Alle Standorte",any:"Beliebig"},sort:{byPosition:"Nach Position sortieren",byName:"Nach Name sortieren",byPrinter:"Nach Drucker sortieren",bySchedule:"Nach Zeitplan sortieren",byDate:"Nach Datum sortieren",ascendingOldest:"Aufsteigend (älteste zuerst)",descendingNewest:"Absteigend (neueste zuerst)"},badges:{staged:"Bereitgestellt",requiresPrevious:"Erfordert vorherigen Erfolg",autoPowerOff:"Automatisch ausschalten",gcodeInjection:"G-Code"},empty:{title:"Keine Drucke geplant",description:'Planen Sie einen Druck von der Archivseite über die Option "Planen" im Kontextmenü oder ziehen Sie Dateien hierher.'},time:{asap:"Sofort",overdue:"Überfällig",now:"Jetzt",lessThanMinute:"In weniger als einer Minute",inMinutes:"In {{count}} Min",inHours:"In {{count}} Stunden"},actions:{stopPrint:"Druck stoppen",startPrint:"Druck starten",requeue:"Erneut einreihen"},bulkEdit:{title:"{{count}} Element bearbeiten",title_plural:"{{count}} Elemente bearbeiten",description:"Nur geänderte Einstellungen werden auf ausgewählte Elemente angewendet.",printer:"Drucker",noChange:"— Keine Änderung —",queueOptions:"Warteschlangenoptionen",staged:"Bereitgestellt (manueller Start)",autoPowerOff:"Nach Druck automatisch ausschalten",requirePrevious:"Vorherigen Erfolg erfordern",printOptions:"Druckoptionen",bedLevelling:"Bett-Nivellierung",flowCalibration:"Fluss-Kalibrierung",vibrationCalibration:"Vibrations-Kalibrierung",layerInspection:"Erste-Schicht-Prüfung",timelapse:"Zeitraffer",useAms:"AMS verwenden",applyChanges:"Änderungen übernehmen",selectAll:"Alle auswählen",deselectAll:"Auswahl aufheben",selected:"{{count}} ausgewählt",editSelected:"Ausgewählte bearbeiten",cancelSelected:"Ausgewählte abbrechen"},confirm:{cancelTitle:"Geplanten Druck abbrechen",cancelMessage:'Möchten Sie "{{name}}" wirklich abbrechen?',stopTitle:"Druck stoppen",stopMessage:'Möchten Sie den aktuellen Druck "{{name}}" wirklich stoppen? Der Druckauftrag wird am Drucker abgebrochen.',removeTitle:"Aus Verlauf entfernen",removeMessage:'Möchten Sie "{{name}}" wirklich aus dem Warteschlangenverlauf entfernen?',clearHistoryTitle:"Verlauf löschen",clearHistoryMessage:"Möchten Sie alle {{count}} Element(e) aus dem Verlauf entfernen?",cancelButton:"Druck abbrechen",stopButton:"Druck stoppen",thisPrint:"diesen Druck",thisItem:"dieses Element"},toast:{cancelled:"Warteschlangenelement abgebrochen",cancelFailed:"Element konnte nicht abgebrochen werden",removed:"Warteschlangenelement entfernt",removeFailed:"Element konnte nicht entfernt werden",stopped:"Druck gestoppt",stopFailed:"Druck konnte nicht gestoppt werden",released:"Druck in Warteschlange freigegeben",startFailed:"Druck konnte nicht gestartet werden",reorderFailed:"Warteschlange konnte nicht neu geordnet werden",historyCleared:"{{count}} Verlaufselement(e) gelöscht",clearHistoryFailed:"Verlauf konnte nicht gelöscht werden",updateFailed:"Elemente konnten nicht aktualisiert werden",bulkCancelled:"{{count}} Element(e) abgebrochen",bulkCancelFailed:"Elemente konnten nicht abgebrochen werden"},timeline:{listView:"Liste",timelineView:"Zeitstrahl",unassigned:"Nicht zugewiesen",noData:"Keine geplanten Drucke für diesen Tag",allDoneBy:"Alle Drucke voraussichtlich fertig um {{time}}",staged:"Bereitgestellt",filterAll:"Alle anzeigen",filterPrinting:"Druckend",filterQueued:"Warteschlange",time:{anyMoment:"jeden Moment",minutesLeft:"{{minutes}}m übrig",hoursLeft:"{{hours}}h übrig",hoursMinutesLeft:"{{hours}}h {{minutes}}m übrig"},day:{previous:"Vorheriger Tag",next:"Nächster Tag",today:"Heute"}},permissions:{noStopPrint:"Sie haben keine Berechtigung, Drucke zu stoppen",noStartPrint:"Sie haben keine Berechtigung, Drucke zu starten",noEdit:"Sie haben keine Berechtigung, dieses Warteschlangenelement zu bearbeiten",noCancel:"Sie haben keine Berechtigung, dieses Warteschlangenelement abzubrechen",noRequeue:"Sie haben keine Berechtigung, Elemente erneut einzureihen",noRemove:"Sie haben keine Berechtigung, dieses Warteschlangenelement zu entfernen",noClearHistory:"Sie haben keine Berechtigung, den gesamten Verlauf zu löschen",noEditItems:"Sie haben keine Berechtigung, Warteschlangenelemente zu bearbeiten",noCancelItems:"Sie haben keine Berechtigung, Warteschlangenelemente abzubrechen"}},backgroundDispatch:{unknownFile:"Unbekannte Datei",unknownPrinter:"Unbekannter Drucker",startingPrints:"Starte Drucke",progressSummary:"{{complete}}/{{total}} abgeschlossen • Geplant: {{dispatched}} • In Bearbeitung: {{processing}}",expandDetails:"Dispatch-Details ausklappen",collapseDetails:"Dispatch-Details einklappen",dismissToast:"Dispatch-Hinweis schließen",cancelDispatchJob:"Dispatch-Job abbrechen",cancel:"Abbrechen",cancelling:"Wird abgebrochen…",awaitingPrinter:"Warte auf Drucker…",status:{dispatched:"Geplant",processing:"In Bearbeitung",completed:"Abgeschlossen",failed:"Fehlgeschlagen",cancelled:"Abgebrochen"},toast:{cancellingUpload:"Upload wird abgebrochen...",cancelled:"Dispatch abgebrochen",cancelFailed:"Dispatch konnte nicht abgebrochen werden",completeWithFailures:"Background Dispatch abgeschlossen: {{completed}} erfolgreich, {{failed}} fehlgeschlagen",completeSuccess:"Background Dispatch abgeschlossen: {{completed}} erfolgreich",printStartedRemaining:"{{completed}} Druck(e) gestartet, {{remaining}} weitere werden gesendet..."}},stats:{title:"Statistiken",subtitle:"Widgets zum Neuanordnen ziehen. Auf das Augensymbol klicken zum Ausblenden.",overview:"Übersicht",totalPrints:"Gesamtdrucke",successRate:"Erfolgsrate",totalPrintTime:"Gesamtdruckzeit",printTime:"Druckzeit",totalFilament:"Gesamtverbrauch Filament",filamentUsed:"Filamentverbrauch",filamentCost:"Filamentkosten",totalCost:"Gesamtkosten",energyUsed:"Energieverbrauch",energyCost:"Energiekosten",energyWarmingUpTooltip:"Die Energieerfassung sammelt noch stündliche Snapshots. Zeitraumwerte werden genau, sobald vor dem gewählten Bereich mindestens ein Snapshot vorliegt. Frühe Werte können zu niedrig sein.",averagePrintTime:"Durchschnittliche Druckzeit",printsPerDay:"Drucke pro Tag",byPrinter:"Nach Drucker",printsByPrinter:"Drucke nach Drucker",byMaterial:"Nach Material",byMonth:"Nach Monat",last7Days:"Letzte 7 Tage",last30Days:"Letzte 30 Tage",last90Days:"Letzte 90 Tage",allTime:"Gesamt",quickStats:"Schnellstatistiken",printActivity:"Druckaktivität",filamentTypes:"Filamenttypen",filamentTrends:"Filamenttrends",failureAnalysis:"Fehleranalyse",timeAccuracy:"Zeitgenauigkeit",successful:"Erfolgreich:",failed:"Fehlgeschlagen:",cancelled:"Abgebrochen:",perfectEstimate:"100% = perfekte Schätzung",noTimeAccuracyData:"Noch keine Zeitgenauigkeitsdaten",noFilamentData:"Keine Filamentdaten verfügbar",noPrinterData:"Keine Druckerdaten verfügbar",noPrintData:"Keine Druckdaten verfügbar",noPrintDataLast30Days:"Keine Druckdaten in den letzten 30 Tagen",failureReasons:"Fehlerursachen",topFailureReasons:"Häufigste Fehlerursachen",failedPrintsCount:"{{failed}} / {{total}} Drucke fehlgeschlagen",lastWeekRate:"Letzte Woche: {{rate}}%",resetLayout:"Layout zurücksetzen",recalculateCosts:"Kosten neu berechnen",recalculateCostsHint:"Alle Archivkosten mit aktuellen Filamentpreisen neu berechnen",exportStats:"Statistiken exportieren",exportAsCsv:"Als CSV exportieren",exportAsExcel:"Als Excel exportieren",hiddenCount:"{{count}} ausgeblendet",exportDownloaded:"Export heruntergeladen",exportFailed:"Export fehlgeschlagen",layoutReset:"Layout zurückgesetzt",recalculatedCosts:"Kosten für {{count}} Archive neu berechnet",recalculateFailed:"Kosten konnten nicht neu berechnet werden",loadingStats:"Statistiken werden geladen...",noPermissionResetLayout:"Sie haben keine Berechtigung, das Layout zurückzusetzen",noPermissionRecalculate:"Sie haben keine Berechtigung, Kosten neu zu berechnen",noPrintDataInRange:"Keine Druckdaten im ausgewählten Zeitraum",periodFilament:"Filamentverbrauch",periodCost:"Kosten",avgPerPrint:"Durchschnitt pro Druck",usageOverTime:"Verbrauch im Zeitverlauf",filamentByWeight:"Gewicht",printDuration:"Druckdauer",printerUtilization:"Druckerauslastung",filamentSuccess:"Erfolg nach Material",printHabits:"Druckgewohnheiten",printTimeOfDay:"Druck-Tageszeit",colorDistribution:"Farbverteilung",noColorData:"Keine Farbdaten verfügbar",records:"Rekorde",longestPrint:"Längster Druck",heaviestPrint:"Schwerster Druck",mostExpensivePrint:"Teuerster Druck",busiestDay:"Aktivster Tag",successStreak:"Erfolgsserie",streakPrint:"aufeinanderfolgender Druck",streakPrints:"{{count}} aufeinanderfolgende Drucke",printerStats:"Druckerstatistiken",hours:"Stunden",avgPrints:"Ø Drucke",noArchiveData:"Keine Druckdaten verfügbar",filamentByTime:"Zeitverlauf",avgWeight:"Ø Gewicht",avgTime:"Ø Zeit",filamentByPrints:"Drucke",timeframe:{today:"Heute","this-week":"Diese Woche","this-month":"Dieser Monat","last-7":"Letzte 7 Tage","last-30":"Letzte 30 Tage","last-90":"Letzte 90 Tage","this-year":"Dieses Jahr","all-time":"Gesamt",custom:"Benutzerdefiniert",from:"Von",to:"Bis"},allUsers:"Alle Benutzer",noUser:"Kein Benutzer (System)",filterByUser:"Nach Benutzer filtern"},maintenance:{title:"Wartung",overview:"Übersicht",allOk:"Alle Wartungen aktuell",dueCount:"{{count}} Aufgabe fällig",dueCount_plural:"{{count}} Aufgaben fällig",warningCount:"{{count}} Warnung",warningCount_plural:"{{count}} Warnungen",totalPrintTime:"Gesamtdruckzeit",nextMaintenance:"Nächste Wartung",nothingDue:"Nichts fällig",tasks:"Aufgaben",lastPerformed:"Zuletzt durchgeführt",interval:"Intervall",hoursRemaining:"{{hours}}h verbleibend",hoursOverdue:"{{hours}}h überfällig",markDone:"Als erledigt markieren",performMaintenance:"Wartung durchführen",history:"Verlauf",noHistory:"Kein Wartungsverlauf",editPrintHours:"Druckstunden bearbeiten",currentHours:"Aktuelle Stunden",statusTab:"Status",settingsTab:"Einstellungen",overdueCount:"{{count}} überfällig",dueSoonCount:"{{count}} bald fällig",dueSoon:"Bald fällig",allGood:"Alles in Ordnung",overdueBy:"Überfällig um {{duration}}",dueIn:"Fällig in {{duration}}",timeLeft:"{{duration}} verbleibend",day:"1 Tag",days:"{{count}} Tage",week:"1 Woche",weeks:"{{count}} Wochen",month:"1 Monat",months:"{{count}} Monate",year:"1 Jahr",maintenanceTypes:"Wartungstypen",maintenanceTypesDescription:"Systemtypen und Ihre benutzerdefinierten Wartungsaufgaben",addCustomType:"Benutzerdefinierten Typ hinzufügen",restoreDefaults:"Standardaufgaben wiederherstellen",intervalType:"Intervalltyp",intervalValue:"Intervall ({{type}})",icon:"Symbol",documentationLink:"Dokumentationslink (optional)",assignToPrinters:"Druckern zuweisen",selectAtLeastOnePrinter:"Wählen Sie mindestens einen Drucker",addType:"Typ hinzufügen",custom:"Benutzerdefiniert",printHours:"Druckstunden",calendarDays:"Kalendertage",exampleName:"z.B. HEPA-Filter ersetzen",viewDocumentation:"Dokumentation anzeigen",timeBasedInterval:"Zeitbasiertes Intervall",intervalOverrides:"Intervall-Überschreibungen",intervalOverridesDescription:"Intervalle für bestimmte Drucker anpassen",assignedToPrinters:"Druckern zugewiesen:",noPrintersAssigned:"Keine Drucker zugewiesen",addPrinterShort:"Hinzufügen:",printersAssignedClick:"{{count}} Drucker zugewiesen - klicken zum Verwalten",removeFromPrinter:"Von diesem Drucker entfernen",types:{lubricateCarbonRods:"Karbonstäbe schmieren",lubricateRails:"Linearschienen schmieren",cleanNozzle:"Düse/Hotend reinigen",checkBelts:"Riemenspannung prüfen",cleanBuildPlate:"Druckbett reinigen",checkExtruder:"Extruderzahnräder prüfen",checkCooling:"Kühlungslüfter prüfen",generalInspection:"Allgemeine Inspektion",cleanCarbonRods:"Kohlenstoffstangen reinigen",lubricateSteelRods:"Stahlstangen schmieren",cleanSteelRods:"Stahlstangen reinigen",cleanLinearRails:"Linearschienen reinigen",checkPtfeTube:"PTFE-Schlauch prüfen",replaceHepaFilter:"HEPA-Filter ersetzen",replaceCarbonFilter:"Aktivkohlefilter ersetzen",lubricateLeftNozzleRail:"Linke Düsenschiene schmieren"},maintenanceComplete:"Wartung als abgeschlossen markiert",typeUpdated:"Wartungstyp aktualisiert",typeDeleted:"Wartungstyp gelöscht",defaultsRestored:"{{count}} Standardaufgabe(n) wiederhergestellt",printHoursUpdated:"Druckstunden aktualisiert",printerAssigned:"Drucker zugewiesen",printerRemoved:"Drucker entfernt",deleteTypeConfirm:'"{{name}}" löschen?',deleteSystemTypeTitle:"Standard-Wartungsaufgabe löschen?",deleteSystemTypeMessage:'Möchten Sie die Standard-Wartungsaufgabe "{{name}}" wirklich löschen?',noPermissionUpdate:"Sie haben keine Berechtigung, Wartungselemente zu aktualisieren",noPermissionPerform:"Sie haben keine Berechtigung, Wartungen durchzuführen",noPermissionEditTypes:"Sie haben keine Berechtigung, Wartungstypen zu bearbeiten",noPermissionDeleteTypes:"Sie haben keine Berechtigung, Wartungstypen zu löschen",noPermissionEditHours:"Sie haben keine Berechtigung, Druckstunden zu bearbeiten",noPermissionRemovePrinter:"Sie haben keine Berechtigung, Druckerzuweisungen zu entfernen",noPermissionAssignPrinter:"Sie haben keine Berechtigung, Drucker zuzuweisen",noPermissionEditIntervals:"Sie haben keine Berechtigung, Intervalle zu bearbeiten",configureSettings:"Wartungstypen und Intervalle konfigurieren"},settings:{title:"Einstellungen",general:"Allgemein",tabs:{general:"Allgemein",smartPlugs:"Smart Plugs",notifications:"Benachrichtigungen",queue:"Workflow",filament:"Filament",network:"Netzwerk",apiKeys:"API-Schlüssel",virtualPrinter:"Virtueller Drucker",spoolbuddy:"SpoolBuddy",failureDetection:"Fehlererkennung",users:"Authentifizierung",backup:"Sicherung",emailAuth:"E-Mail-Authentifizierung",ldap:"LDAP",twoFa:"Zwei-Faktor-Auth",oidc:"SSO / OIDC",security:"Sicherheit"},spoolbuddy:{infoTitle:"SpoolBuddy-Geräte",infoBody:"SpoolBuddy-Kioske registrieren sich automatisch per Heartbeat. Ein Gerät hier abmelden, wenn es nicht mehr verwendet wird oder wenn ein veralteter Eintrag nach einem Daemon-Absturz übrig geblieben ist.",duplicatesTitle:"{{count}} Geräte registriert",duplicatesBody:"Die Kiosk-Oberfläche verwendet nur das zuerst registrierte Gerät. Falls eines davon ein veralteter Doppeleintrag nach einem Absturz ist, kann es hier entfernt werden — ein laufendes Gerät registriert sich beim nächsten Heartbeat automatisch neu.",empty:"Noch keine SpoolBuddy-Geräte registriert.",online:"Online",offline:"Offline",unregister:"Abmelden",unregisterSuccess:"Gerät abgemeldet",unregisterError:"Gerät konnte nicht abgemeldet werden",confirmTitle:"SpoolBuddy-Gerät abmelden?",confirmBody:'Dies entfernt „{{hostname}}" ({{deviceId}}) aus der Datenbank. Ein laufendes Gerät registriert sich beim nächsten Heartbeat automatisch neu.',ipAddress:"IP-Adresse",firmware:"Firmware",lastSeen:"Zuletzt gesehen",daemonUptime:"Daemon-Laufzeit",systemUptime:"System-Laufzeit",never:"nie",nfc:"NFC",scale:"Waage",cpuTemp:"CPU-Temp.",cpuLoad:"CPU-Last",memory:"Speicher",disk:"Festplatte",update:"Aktualisieren",updateConfirmTitle:"Spoolbuddy-Daemon aktualisieren?",updateConfirmBody:'Software-Update auf „{{hostname}}" auslösen? Der Daemon startet nach dem Update neu.',restartBrowser:"Browser neu starten",restartBrowserConfirmTitle:"Kiosk-Browser neu starten?",restartBrowserConfirmBody:'Kiosk-Browser auf „{{hostname}}" neu starten? Die Anzeige wird kurz schwarz.',restartDaemon:"Daemon neu starten",restartDaemonConfirmTitle:"Spoolbuddy-Daemon neu starten?",restartDaemonConfirmBody:'Spoolbuddy-Daemon auf „{{hostname}}" neu starten? Das Gerät ist für einige Sekunden offline.',reboot:"Neustart",rebootConfirmTitle:"Gerät neu starten?",rebootConfirmBody:'„{{hostname}}" neu starten? Das Gerät ist für etwa eine Minute offline.',shutdown:"Herunterfahren",shutdownConfirmTitle:"Gerät herunterfahren?",shutdownConfirmBody:'„{{hostname}}" herunterfahren? Physischer Zugriff ist nötig, um es wieder einzuschalten.',commandConfirm:"Bestätigen",commandQueued:"Befehl eingereiht",commandError:"Befehl konnte nicht gesendet werden"},ldap:{title:"LDAP-Authentifizierung",enabledDesc:"LDAP-Authentifizierung ist aktiviert",disabledDesc:"LDAP-Authentifizierung ist deaktiviert",disabledHint:"LDAP-Einstellungen unten konfigurieren und speichern, dann aktivieren.",enabled:"LDAP-Authentifizierung aktiviert",disabled:"LDAP-Authentifizierung deaktiviert",feature1:"Benutzer können sich mit LDAP-Anmeldedaten anmelden",feature2:"Lokales Admin-Konto bleibt als Fallback erhalten",feature3:"LDAP-Gruppen werden bei der Anmeldung BamBuddy-Gruppen zugeordnet",serverConfig:"LDAP-Server-Konfiguration",serverUrl:"Server-URL",serverUrlHint:"Verwenden Sie ldap:// für Standard oder ldaps:// für SSL-Verbindungen",security:"Sicherheit",securityHint:"StartTLS aktualisiert eine einfache Verbindung auf TLS. LDAPS verwendet TLS von Anfang an.",bindDn:"Bind-DN (Dienstkonto)",bindPassword:"Bind-Passwort",searchBase:"Such-Basis-DN",userFilter:"Benutzer-Suchfilter",userFilterHint:"{username} wird durch den Anmeldenamen ersetzt. Verwenden Sie (uid={username}) für OpenLDAP.",advanced:"Erweitert",autoProvision:"Benutzer automatisch anlegen",autoProvisionHint:"Automatisch ein BamBuddy-Konto bei der ersten LDAP-Anmeldung erstellen",defaultGroup:"Standardgruppe",defaultGroupNone:"— Keine (kein Fallback) —",defaultGroupHint:"Fallback-Gruppe, die zugewiesen wird, wenn sich ein LDAP-Benutzer authentifiziert, aber in keiner zugeordneten LDAP-Gruppe enthalten ist. Leer lassen, um nicht zugeordnete Benutzer ohne Berechtigungen zu belassen.",groupMapping:"Gruppenzuordnung (JSON)",groupMappingHint:"LDAP-Gruppen-DNs BamBuddy-Gruppen zuordnen. Verfügbare Gruppen: ",testConnection:"Verbindung testen",settingsSaved:"LDAP-Einstellungen gespeichert",errors:{serverRequired:"LDAP-Server-URL ist erforderlich",searchBaseRequired:"Such-Basis-DN ist erforderlich",enableAuthFirst:"Authentifizierung zuerst aktivieren",configureLdapFirst:"LDAP-Einstellungen zuerst speichern"}},email:{smtpSettings:"SMTP-Konfiguration",smtpHost:"SMTP-Server",smtpPort:"SMTP-Port",security:"Sicherheit",authentication:"Authentifizierung",username:"Benutzername",password:"Passwort",fromEmail:"Absender-E-Mail",fromName:"Absendername",testConnection:"SMTP-Verbindung testen",testRecipient:"Test-Empfänger-E-Mail",sendTest:"Test-E-Mail senden",sending:"Wird gesendet...",save:"Einstellungen speichern",saving:"Wird gespeichert...",advancedAuth:"Erweiterte Authentifizierung",advancedAuthEnabled:"Erweiterte Authentifizierung ist aktiviert",advancedAuthEnabledDesc:"E-Mail-basierte Benutzerverwaltungsfunktionen sind aktiv. Neue Benutzer erhalten automatisch generierte Passwörter per E-Mail und können ihr Passwort über die Passwort vergessen Funktion zurücksetzen.",advancedAuthDisabled:"Erweiterte Authentifizierung ist deaktiviert",advancedAuthDisabledDesc:"Aktivieren Sie die erweiterte Authentifizierung, um E-Mail-basierte Funktionen für die Benutzerverwaltung zu aktivieren.",enable:"Aktivieren",disable:"Deaktivieren",feature1:"Passwörter werden automatisch generiert und an neue Benutzer gesendet",feature2:"Benutzer können sich mit Benutzername oder E-Mail anmelden",feature3:"Passwort vergessen Funktion ist verfügbar",feature4:"Administratoren können Benutzerpasswörter per E-Mail zurücksetzen",errors:{requiredFields:"Bitte füllen Sie alle Pflichtfelder aus",usernameRequired:"Benutzername ist erforderlich, wenn Authentifizierung aktiviert ist",enterTestEmail:"Bitte geben Sie eine Test-E-Mail-Adresse ein",smtpServerAndEmail:"Bitte füllen Sie SMTP-Server und Absender-E-Mail aus, bevor Sie testen",usernamePasswordRequired:"Benutzername und Passwort sind erforderlich, wenn Authentifizierung aktiviert ist",configureSmtpFirst:"Bitte konfigurieren und testen Sie zuerst die SMTP-Einstellungen",enableAuthFirst:"Bitte aktivieren Sie zuerst die Authentifizierung, um E-Mail-basierte Funktionen nutzen zu können."},success:{settingsSaved:"SMTP-Einstellungen erfolgreich gespeichert"},securityOptions:{starttls:"STARTTLS (Port 587)",ssl:"SSL/TLS (Port 465)",none:"Keine (Port 25)"},authOptions:{enabled:"Aktiviert",disabled:"Deaktiviert"}},appearance:"Erscheinungsbild",notifications:"Benachrichtigungen",smartPlugs:"Smart Plugs",spoolman:"Spoolman",updates:"Aktualisierungen",language:"Sprache",languageDescription:"Wählen Sie Ihre bevorzugte Sprache",theme:"Design",themeLight:"Hell",themeDark:"Dunkel",themeSystem:"System",defaultView:"Standardansicht",defaultViewDescription:"Seite, die beim Öffnen der App angezeigt wird",checkForUpdates:"Nach Updates suchen",autoUpdate:"Automatische Updates",currentVersion:"Aktuelle Version",latestVersion:"Neueste Version",upToDate:"Sie sind auf dem neuesten Stand",updateAvailable:"Update verfügbar",notificationLanguage:"Benachrichtigungssprache",notificationLanguageDescription:"Sprache für Push-Benachrichtigungen",bedCooledThreshold:"Bett-Abkühlung Schwellenwert",bedCooledThresholdDescription:"Temperatur, unter der das Bett nach einem Druck als abgekühlt gilt",userNotificationsEnabled:"Benutzerbenachrichtigungen",userNotificationsEnabledDescription:"Aktiviert das Benutzerbenachrichtigungsmenü und E-Mail-Benachrichtigungen für Druckereignisse. Erfordert Erweiterte Authentifizierung.",userNotificationsDisabledHint:"Erweiterte Authentifizierung aktivieren, um Benutzerbenachrichtigungen zu verwenden.",notificationProviders:"Benachrichtigungsanbieter",addProvider:"Anbieter hinzufügen",editProvider:"Anbieter bearbeiten",providerType:"Anbietertyp",testNotification:"Testbenachrichtigung",testSuccess:"Testbenachrichtigung erfolgreich gesendet",testFailed:"Testbenachrichtigung konnte nicht gesendet werden",quietHours:"Ruhezeiten",quietHoursDescription:"Keine Störungen während dieser Zeiten",quietHoursStart:"Beginn",quietHoursEnd:"Ende",events:{title:"Benachrichtigungsereignisse",printStart:"Druck gestartet",printComplete:"Druck abgeschlossen",printFailed:"Druck fehlgeschlagen",printStopped:"Druck gestoppt",printProgress:"Fortschrittsmeldungen",printProgressDescription:"Bei 25%, 50%, 75% benachrichtigen",printerOffline:"Drucker offline",printerError:"Druckerfehler",filamentLow:"Filament niedrig",maintenanceDue:"Wartung fällig",maintenanceDueDescription:"Benachrichtigen, wenn Wartung erforderlich"},smartPlug:{title:"Smart Plugs",add:"Smart Plug hinzufügen",edit:"Smart Plug bearbeiten",name:"Name",ipAddress:"IP-Adresse",linkedPrinter:"Verknüpfter Drucker",autoOn:"Automatisch einschalten",autoOnDescription:"Einschalten beim Druckstart",autoOff:"Automatisch ausschalten",autoOffDescription:"Ausschalten nach Druckende",offDelay:"Ausschaltverzögerung",offDelayMinutes:"Minuten nach Druck",offDelayTemp:"Wenn Düse unter Temperatur",currentState:"Aktueller Status",turnOn:"Einschalten",turnOff:"Ausschalten"},filamentTracking:"Filament-Verfolgung",filamentTrackingDesc:"Wählen Sie, wie Sie Ihre Filamentspulen verfolgen möchten. Sie können das integrierte Inventar oder einen externen Spoolman-Server verwenden.",filamentChecks:"Filament-Prüfungen",disableFilamentWarnings:"Filament-Warnungen deaktivieren",disableFilamentWarningsDesc:"Keine Warnungen über unzureichendes Filament beim Drucken oder Einreihen anzeigen",preferLowestFilament:"Niedrigsten Filamentrest bevorzugen",preferLowestFilamentDesc:"Bei mehreren passenden Spulen die mit dem geringsten Restfilament verwenden",trackingModeBuiltIn:"Integriertes Inventar",trackingModeBuiltInDesc:"RFID-Erkennung und Verbrauchserfassung inklusive",trackingModeSpoolmanDesc:"Externer Filament-Management-Server",builtInFeatureRfid:"Erkennt automatisch Bambu Lab RFID-Spulen im AMS",builtInFeatureUsage:"Erfasst den Filamentverbrauch pro Druck",builtInFeatureCatalog:"Spulen, Farben und K-Faktor-Profile verwalten",builtInFeatureThirdParty:"Drittanbieter-Spulen können Inventarspulen zugewiesen werden",amsSyncButton:"Gewichte vom AMS synchronisieren",amsSyncTitle:"Spulengewichte vom AMS synchronisieren",amsSyncMessage:"Alle Inventar-Spulengewichte werden mit den aktuellen AMS-Restwerten der verbundenen Drucker überschrieben. Verwenden Sie dies zur Wiederherstellung beschädigter Gewichtsdaten. Drucker müssen online sein.",amsSyncing:"Synchronisiere...",amsSyncSuccess:"{{synced}} Spule(n) synchronisiert, {{skipped}} übersprungen",amsSyncError:"Synchronisierung der Gewichte vom AMS fehlgeschlagen",spoolmanAmsSyncButton:"Spoolman-Gewichte vom AMS synchronisieren",spoolmanAmsSyncTitle:"Spoolman-Spulengewichte vom AMS synchronisieren",spoolmanAmsSyncMessage:"Dabei werden alle Spoolman-Spulengewichte anhand der aktuellen AMS-Füllstandswerte der verbundenen Drucker aktualisiert. Die Drucker müssen online sein.",spoolmanAmsSyncing:"Synchronisiere...",spoolmanAmsSyncSuccess:"{{synced}} Spule(n) synchronisiert, {{skipped}} übersprungen",spoolmanAmsSyncError:"Synchronisierung der Spoolman-Gewichte vom AMS fehlgeschlagen",spoolmanAmsSyncErrorUnreachable:"Synchronisierung fehlgeschlagen (Spoolman nicht erreichbar)",spoolmanAmsSyncErrorNotConfigured:"Synchronisierung fehlgeschlagen (Spoolman nicht konfiguriert)",spoolmanNotConfigured:"Spoolman nicht konfiguriert",spoolmanFilamentCatalogTitle:"Spoolman-Filamentkatalog",spoolmanFilamentCatalogDesc:"Filamentnamen und Leergewichte aus deiner Spoolman-Instanz. Name und Spulengewicht sind hier editierbar; alle anderen Eigenschaften werden direkt in Spoolman verwaltet.",spoolmanUrl:"Spoolman URL",spoolmanUrlHint:"URL Ihres Spoolman-Servers (z.B. http://localhost:7912)",spoolmanConnected:"Verbunden",spoolmanDisconnected:"Nicht verbunden",status:"Status",connect:"Verbinden",disconnect:"Trennen",howSyncWorks:"So funktioniert die Synchronisierung",syncInfoRfidOnly:"Nur offizielle Bambu Lab Spulen mit RFID werden synchronisiert",syncInfoAutoCreate:"Neue Spulen werden bei der ersten Synchronisierung automatisch in Spoolman erstellt",syncInfoThirdPartySkipped:"Nicht-Bambu-Lab-Spulen (Drittanbieter, nachgefüllt) werden übersprungen",linkingExistingSpools:"Vorhandene Spulen verknüpfen",linkingExistingSpoolsDesc:'Um vorhandene Spoolman-Spulen mit Ihrem AMS zu verknüpfen, fahren Sie über einen AMS-Slot und klicken Sie auf "Mit Spoolman verknüpfen".',syncMode:"Synchronisierungsmodus",syncModeAuto:"Automatisch",syncModeManual:"Nur manuell",syncModeAutoDesc:"AMS-Daten werden automatisch synchronisiert, wenn Änderungen erkannt werden",syncModeManualDesc:"Nur bei manueller Auslösung synchronisieren",syncAmsData:"AMS-Daten synchronisieren",syncAmsDataDesc:"AMS-Daten des Druckers manuell mit Spoolman synchronisieren",allPrinters:"Alle Drucker",noDefaultPrinter:"Kein Standard (jedes Mal fragen)",sidebarOrder:"Seitenleisten-Reihenfolge",saveThumbnails:"Vorschaubilder speichern",captureFinishPhoto:"Abschlussfoto aufnehmen",noPrintersConfigured:"Keine Drucker konfiguriert",archiveMode:{always:"Immer Archiveintrag erstellen",never:"Nie Archiveintrag erstellen",ask:"Jedes Mal fragen"},checkForUpdatesLabel:"Nach Updates suchen",checkPrinterFirmware:"Drucker-Firmware prüfen",includeBetaUpdates:"Beta-Versionen einschließen",includeBetaUpdatesDesc:"Über Beta- und Vorabversionen bei der Updateprüfung benachrichtigen",enableRetry:"Wiederholung aktivieren",homeAssistantDescription:"Smart Plugs über Home Assistant steuern",environmentManagedLabel:"(Umgebungsvariable)",autoEnabledViaEnv:"Automatisch über Umgebungsvariablen aktiviert",urlFromEnvReadOnly:"Wert wird über HA_URL Umgebungsvariable gesetzt (schreibgeschützt)",tokenFromEnvReadOnly:"Wert wird über HA_TOKEN Umgebungsvariable gesetzt (schreibgeschützt)",mqttConnectedTo:"Verbunden mit",prometheusDescription:"Druckerdaten im Prometheus-Format bereitstellen",noSmartPlugsTitle:"Keine Smart Plugs konfiguriert",noSmartPlugsDescription:"Fügen Sie einen Tasmota-basierten Smart Plug hinzu, um den Energieverbrauch zu verfolgen und die Stromsteuerung zu automatisieren.",noProvidersTitle:"Keine Anbieter konfiguriert",noProvidersDescription:"Fügen Sie einen Anbieter hinzu, um Benachrichtigungen zu erhalten.",noTemplatesAvailable:"Keine Vorlagen verfügbar. Starten Sie das Backend neu, um Standardvorlagen zu laden.",apiPermissionView:"Druckerstatus und Warteschlange anzeigen",apiPermissionEdit:"Elemente zur Druckwarteschlange hinzufügen und entfernen",apiKeysEmptyTitle:"Keine API-Schlüssel",apiKeysEmptyDescription:"Erstellen Sie einen API-Schlüssel zur Integration mit externen Diensten.",noUsersFound:"Keine Benutzer gefunden",noGroupsFound:"Keine Gruppen gefunden",noGroupsAvailable:"Keine Gruppen verfügbar",passwordsDoNotMatch:"Passwörter stimmen nicht überein",systemGroupWarning:"System-Gruppennamen können nicht geändert werden",authDisabledTitle:"Authentifizierung ist deaktiviert",authDisabledFeature1:"Anmeldung zum Zugriff auf das System erforderlich",authDisabledFeature2:"Mehrere Benutzer mit gruppenbasierten Berechtigungen erstellen",authDisabledFeature3:"Zugriff mit über 50 granularen Berechtigungen steuern",userHasCreated:"Dieser Benutzer hat erstellt:",userItemsQuestion:"Was möchten Sie mit diesen Elementen tun?",deleteUserConfirm:"Möchten Sie diesen Benutzer wirklich löschen?",actionCannotBeUndone:"Diese Aktion kann nicht rückgängig gemacht werden.",addFirstSmartPlug:"Ersten Smart Plug hinzufügen",providers:"Anbieter",log:"Protokoll",testAll:"Alle testen",testResults:"Testergebnisse",testPassedCount:"{{count}} bestanden",testFailedCount:"{{count}} fehlgeschlagen",messageTemplates:"Nachrichtenvorlagen",messageTemplatesDescription:"Passen Sie Benachrichtigungen für jedes Ereignis an.",apiKeys:"API-Schlüssel",apiKeysDescription:"Erstellen Sie API-Schlüssel für externe Integrationen und Webhooks.",createKey:"Schlüssel erstellen",apiKeyCreated:"API-Schlüssel erfolgreich erstellt",apiKeyCopyWarning:"Kopieren Sie diesen Schlüssel jetzt - er wird nicht mehr angezeigt!",useInApiBrowser:"Im API-Browser verwenden",createNewApiKey:"Neuen API-Schlüssel erstellen",keyName:"Schlüsselname",keyNamePlaceholder:"z.B. Home Assistant, OctoPrint",readStatus:"Status lesen",readStatusDescription:"Druckerstatus und Warteschlange anzeigen",manageQueue:"Warteschlange verwalten",manageQueueDescription:"Elemente zur Druckwarteschlange hinzufügen und entfernen",controlPrinter:"Drucker steuern",controlPrinterDescription:"Drucke pausieren, fortsetzen und stoppen",manageLibrary:"Bibliothek verwalten",manageLibraryDescription:"Bibliotheksdateien hochladen, umbenennen und löschen; Modelle aus MakerWorld importieren",manageInventory:"Bestand verwalten",manageInventoryDescription:"Spulen und Bestandseinträge anlegen, ändern und löschen. Erforderlich für SpoolBuddy-Kioske (NFC-Scan, Waagenmessungen, Kiosk-Systembefehle).",libraryBadge:"Bibliothek",inventoryBadge:"Bestand",cloudAccess:"Cloud-Zugriff erlauben",cloudAccessDescription:"Liest Bambu-Cloud-Presets und -Filamente in Ihrem Namen. Erfordert eine Anmeldung in Bambu Cloud.",cloudBadge:"Cloud",updateEnergyCost:"Strompreis aktualisieren",updateEnergyCostDescription:"Erlaubt diesem Schlüssel, einen neuen Strompreis pro kWh an /settings/electricity-price zu senden. Nützlich für Home-Assistant-Automatisierungen mit dynamischen Tarifen (Tibber, Octopus usw.). Dies ist das einzige Einstellungsfeld, das per API-Schlüssel schreibbar ist.",energyCostBadge:"Energie",legacyKey:"Alt",legacyKeyTooltip:"Wurde vor der nutzerbezogenen Eigentümerschaft erstellt; neu erstellen, um Cloud-Zugriff zu nutzen",unnamedKey:"Unbenannter Schlüssel",lastUsed:"Zuletzt verwendet",read:"Lesen",control:"Steuern",createFirstKey:"Ersten Schlüssel erstellen",webhookEndpoints:"Webhook-Endpunkte",webhookApiKeyHint:"Verwenden Sie Ihren API-Schlüssel im X-API-Key-Header.",webhook:{getAllStatus:"Alle Druckerstatus abrufen",getSpecificStatus:"Spezifischen Druckerstatus abrufen",addToQueue:"Zur Druckwarteschlange hinzufügen",pausePrint:"Druck pausieren",resumePrint:"Druck fortsetzen",stopPrint:"Druck stoppen"},apiBrowser:"API-Browser",apiBrowserDescription:"Erkunden und testen Sie alle verfügbaren API-Endpunkte.",apiKeyForTesting:"API-Schlüssel zum Testen",apiKeyPlaceholder:"Fügen Sie hier Ihren API-Schlüssel ein, um authentifizierte Endpunkte zu testen...",apiKeyHint:"Dieser Schlüssel wird als X-API-Key-Header mit Anfragen gesendet.",deleteApiKeyTitle:"API-Schlüssel löschen",deleteApiKeyMessage:"Möchten Sie diesen API-Schlüssel wirklich löschen? Alle Integrationen, die diesen Schlüssel verwenden, funktionieren nicht mehr.",deleteKey:"Schlüssel löschen",amsDisplayThresholds:"AMS-Anzeigeschwellenwerte",amsThresholdsDescription:"Konfigurieren Sie Farbschwellenwerte für AMS-Feuchtigkeits- und Temperaturanzeigen.",humidity:"Luftfeuchtigkeit",goodGreen:"Gut (grün)",fairOrange:"Mittel (orange)",aboveFairBad:"Über dem mittleren Schwellenwert wird rot angezeigt (schlecht)",fairAlsoDryingThreshold:"Dieser Schwellenwert wird auch für die automatische Trocknung verwendet",temperature:"Temperatur",goodBlue:"Gut (blau)",aboveFairHot:"Über dem mittleren Schwellenwert wird rot angezeigt (heiß)",historyRetention:"Verlaufsaufbewahrung",keepSensorHistory:"Sensorverlauf behalten für",historyRetentionDescription:"Ältere Feuchtigkeits- und Temperaturdaten werden automatisch gelöscht",defaultPrintOptions:"Standard-Druckoptionen",defaultPrintOptionsDescription:"Standardwerte für Druckoptionen bei neuen Drucken festlegen. Diese können im Druckdialog pro Druck überschrieben werden.",defaultBedLevelling:"Bett-Nivellierung",defaultBedLevellingDesc:"Bett vor dem Druck automatisch nivellieren",defaultFlowCali:"Fluss-Kalibrierung",defaultFlowCaliDesc:"Extrusionsfluss kalibrieren",defaultVibrationCali:"Vibrationskalibrierung",defaultVibrationCaliDesc:"Ringing-Artefakte reduzieren",defaultLayerInspect:"Erste-Schicht-Inspektion",defaultLayerInspectDesc:"KI-Inspektion der ersten Schicht",defaultTimelapse:"Zeitraffer",defaultTimelapseDesc:"Zeitraffervideo aufnehmen",staggeredStart:"Versetzter Start",staggeredStartDescription:"Standard-Gruppengröße und -Intervall beim Staffeln von Mehrdrucker-Batchstarts. Pro Batch im Druck-Dialog überschreibbar.",plateClear:"Druckplatte-Bestätigung",requirePlateClear:"Druckplatte-Bestätigung erforderlich",requirePlateClearDescription:'Wenn aktiviert, wartet der Scheduler auf eine Druckplatten-Bestätigung pro Drucker, bevor geplante Drucke auf Druckern mit abgeschlossenen Aufträgen gestartet werden. Wenn dies deaktiviert ist, werden auch das Druckplatten-Status-Badge und die Schaltfläche "Druckplatte als freigegeben markieren" auf den Druckerkarten ausgeblendet.',gcodeInjection:"G-Code-Injektion",gcodeInjectionDescription:'Konfigurieren Sie benutzerdefinierten G-code, der am Anfang und/oder Ende von Drucken für Auto-Print-Systeme wie Farmloop, SwapMod, AutoClear und Printflow 3D eingefügt wird. Snippets werden pro Druckermodell konfiguriert und angewendet, wenn "G-code einfügen" bei einem Warteschlangen-Element aktiviert ist.',gcodeInjectionNoPrinters:"Keine Drucker gefunden. Fügen Sie Drucker hinzu, um G-code-Snippets zu konfigurieren.",gcodeStartLabel:"Start-G-Code",gcodeEndLabel:"End-G-Code",gcodeStartPlaceholder:"G-code, der vor dem Druckstart eingefügt wird...",gcodeEndPlaceholder:"G-code, der nach dem Druckende angefügt wird...",staggerGroupSize:"Gruppengröße",staggerGroupSizeHelp:"Anzahl gleichzeitig zu startender Drucker pro Gruppe",staggerInterval:"Intervall (Minuten)",staggerIntervalHelp:"Verzögerung zwischen Gruppenstart",queueDrying:"Automatische Trocknung",queueDryingDescription:"AMS-Filament automatisch trocknen, wenn der Drucker zwischen Warteschlangen-Drucken im Leerlauf ist. Verwendet den Feuchtigkeitsschwellenwert oben.",queueDryingEnabled:"Automatische Trocknung aktivieren",queueDryingEnabledDescription:"AMS-Trocknung automatisch starten, wenn der Drucker im Leerlauf ist und die Feuchtigkeit über dem Schwellenwert liegt",queueDryingBlock:"Auf Trocknung warten",queueDryingBlockDescription:"Druckwarteschlange blockieren, bis die Trocknung abgeschlossen ist. Wenn aus, haben Drucke Vorrang.",ambientDryingEnabled:"Umgebungstrocknung",ambientDryingEnabledDescription:"Filament auf inaktiven Druckern automatisch trocknen, wenn die Luftfeuchtigkeit den Schwellenwert überschreitet — auch ohne Warteschlange.",dryingPresets:"Trocknungsvoreinstellungen",dryingPresetsDescription:"Temperatur und Dauer pro Filamenttyp. AMS 2 Pro verwendet niedrigere Temperaturen, AMS-HT unterstützt höhere.",dryingFilament:"Filament",printModal:"Druckdialog",expandCustomMapping:"Benutzerdefinierte Zuordnung standardmäßig erweitern",expandCustomMappingDescription:"Bei Druck auf mehrere Drucker die AMS-Zuordnung pro Drucker erweitert anzeigen",authentication:"Authentifizierung",authEnabledDescription:"Ihre Instanz ist mit Benutzerauthentifizierung gesichert",authDisabledDescription:"Aktivieren Sie die Anmeldepflicht und verwalten Sie den Benutzerzugriff",authDisabledMessage:"Aktivieren Sie die Authentifizierung, um Benutzerkonten zu erstellen, Berechtigungen zu verwalten und Ihre Bambuddy-Instanz zu sichern.",enableAuthentication:"Authentifizierung aktivieren",currentUser:"Aktueller Benutzer",changePassword:"Passwort ändern",admin:"Admin",users:"Benutzer",addUser:"Benutzer hinzufügen",groups:"Gruppen",addGroup:"Gruppe hinzufügen",system:"System",noDescription:"Keine Beschreibung",userCount:"{{count}} Benutzer",permissionCount:"{{count}} Berechtigungen",createUser:"Benutzer erstellen",username:"Benutzername",enterUsername:"Benutzername eingeben",password:"Passwort",enterPassword:"Passwort eingeben",passwordRequirements:"Mindestens 8 Zeichen, davon ein Großbuchstabe, ein Kleinbuchstabe, eine Ziffer und ein Sonderzeichen.",confirmPassword:"Passwort bestätigen",confirmPasswordPlaceholder:"Passwort bestätigen",viewReleaseOnGitHub:"Release auf GitHub anzeigen",turnAllPlugsOn:"Alle Stecker einschalten",turnAllPlugsOff:"Alle Stecker ausschalten",clearNotificationLogs:"Benachrichtigungsprotokolle löschen",clearLogsMessage:"Dadurch werden alle Benachrichtigungsprotokolle, die älter als 30 Tage sind, dauerhaft gelöscht. Diese Aktion kann nicht rückgängig gemacht werden.",clearLogs:"Protokolle löschen",resetUiPreferences:"UI-Einstellungen zurücksetzen",resetUiPreferencesMessage:"Dadurch werden alle UI-Einstellungen auf Standardwerte zurückgesetzt: Seitenleisten-Reihenfolge, Theme, Dashboard-Layout, Ansichtsmodi und Sortiereinstellungen. Ihre Drucker, Archive und Servereinstellungen werden NICHT beeinträchtigt. Die Seite wird nach dem Löschen neu geladen.",resetPreferences:"Einstellungen zurücksetzen",deleteGroupTitle:"Gruppe löschen",deleteGroupMessage:"Möchten Sie diese Gruppe wirklich löschen? Benutzer in dieser Gruppe verlieren diese Berechtigungen.",deleteGroup:"Gruppe löschen",disableAuthenticationTitle:"Authentifizierung deaktivieren",disableAuthenticationMessage:"Möchten Sie die Authentifizierung wirklich deaktivieren? Dadurch wird Ihre Bambuddy-Instanz ohne Anmeldung zugänglich. Alle Benutzer bleiben in der Datenbank, aber die Authentifizierung wird deaktiviert.",disableAuthentication:"Authentifizierung deaktivieren",configureBambuddy:"Bambuddy konfigurieren",systemDefault:"Systemstandard",archiveSettings:"Archiv-Einstellungen",newWindow:"Neues Fenster",embeddedOverlay:"Eingebettetes Overlay",preferredSlicer:"Bevorzugter Slicer",preferredSlicerDescription:"Wähle die Slicer-Anwendung zum Öffnen von Dateien",orcaslicerKnownIssuesWarning:"OrcaSlicer 2.3.2 / 2.4.0-dev haben bekannte CLI-Bugs, die das Slicen vieler von BambuStudio erstellter 3MF-Dateien blockieren — siehe Upstream-Issues #12426 (Segfault bei bemalten Multi-Extruder-Dateien) und #13386 (zu strikte Parameter-Range-Validierung). Bis die Upstream-Fixes verfügbar sind, wird Bambu Studio empfohlen.",useSlicerApi:"Slicer-API verwenden",useSlicerApiDescription:'Wenn aktiv, öffnen "Slice"-Aktionen das in-App Slicer-Modal und rufen den Slicer-API-Sidecar. Aus (Standard): Übergabe an den Desktop-Slicer per URI-Schema.',slicerCard:"Slicer",orcaslicerApiUrl:"OrcaSlicer Sidecar-URL",bambuStudioApiUrl:"Bambu Studio Sidecar-URL",slicerApiUrlDescription:"URL des Slicer-API-Sidecar-Containers. Leer lassen, um die SLICER_API_URL- bzw. BAMBU_STUDIO_API_URL-Umgebungsvariablen zu nutzen.",slicerBundles:{title:"Slicer-Bundles",description:'Importiere ein Drucker-Voreinstellungspaket (.bbscfg), das aus BambuStudio exportiert wurde (Datei → Exportieren → Voreinstellungspaket exportieren → "Drucker-Voreinstellungspaket"). Nach dem Import können Slice-Anfragen Voreinstellungen aus dem Bundle per Name auswählen, ohne das JSON-Profil-Trio erneut hochzuladen.',uploadButton:"Bundle hochladen",uploading:"Hochladen…",loading:"Bundles werden geladen…",empty:"Noch keine Bundles importiert.",summary:"{{processCount}} Prozess · {{filamentCount}} Filament-Voreinstellungen",delete:"Löschen",uploadSuccess:"{{name}} importiert",uploadError:"Bundle-Upload fehlgeschlagen: {{message}}",deleteSuccess:"Bundle entfernt",deleteError:"Löschen des Bundles fehlgeschlagen: {{message}}",confirmDeleteTitle:"Dieses Bundle entfernen?",confirmDeleteMessage:'Slice-Anfragen, die "{{name}}" referenzieren, schlagen fehl, bis das Bundle erneut importiert wird.'},externalCameras:"Externe Kameras",costTracking:"Kostenverfolgung",printsOnly:"Nur Drucke",totalConsumption:"Gesamtverbrauch",dataManagement:"Datenverwaltung",storageUsage:"Speichernutzung",storageUsageDescription:"Aufschlüsselung der Datennutzung nach Kategorie",storageUsageTotal:"Gesamt",storageUsageErrors:"Fehler",storageUsageOtherBreakdown:"Sonstiges (enthält statische Assets, Skripte und Konfigurationsdateien)",storageUsageSystem:"System",storageUsageData:"Daten",storageUsageUnavailable:"Speichernutzungsinformationen nicht verfügbar",clearNotificationLogsDescription:"Benachrichtigungsprotokolle älter als 30 Tage löschen",resetUiPreferencesDescription:"Seitenleisten-Reihenfolge, Theme, Ansichtsmodi und Layout-Einstellungen zurücksetzen. Drucker, Archive und Einstellungen werden nicht beeinflusst.",enableHomeAssistant:"Home Assistant aktivieren",enableMqtt:"MQTT aktivieren",useTls:"TLS verwenden",enableMetricsEndpoint:"Metrik-Endpunkt aktivieren",availableMetrics:"Verfügbare Metriken",editUser:"Benutzer bearbeiten",deleteUserTitle:"Benutzer löschen",groupName:"Gruppenname",leaveEmptyForAnonymous:"Leer lassen für anonym",leaveEmptyForNoAuth:"Leer lassen für keine Authentifizierung",enterNewPassword:"Neues Passwort eingeben",confirmNewPassword:"Neues Passwort bestätigen",enterGroupName:"Gruppenname eingeben",enterDescriptionOptional:"Beschreibung eingeben (optional)",enterCurrentPassword:"Aktuelles Passwort eingeben",enterNewPasswordMin6:"Neues Passwort eingeben (min. 6 Zeichen)",toast:{keyCopied:"Schlüssel in Zwischenablage kopiert",copyFailed:"Schlüssel konnte nicht kopiert werden",keyAddedToBrowser:"Schlüssel zum API-Browser hinzugefügt",clearLogsFailed:"Protokolle konnten nicht gelöscht werden",uiPreferencesReset:"UI-Einstellungen zurückgesetzt. Wird neu geladen...",authDisabled:"Authentifizierung erfolgreich deaktiviert",authDisableFailed:"Authentifizierung konnte nicht deaktiviert werden",apiKeyCreated:"API-Schlüssel erstellt",apiKeyDeleted:"API-Schlüssel gelöscht",userCreated:"Benutzer erfolgreich erstellt",userUpdated:"Benutzer erfolgreich aktualisiert",userDeleted:"Benutzer erfolgreich gelöscht",groupCreated:"Gruppe erfolgreich erstellt",groupUpdated:"Gruppe erfolgreich aktualisiert",groupDeleted:"Gruppe erfolgreich gelöscht",fillRequiredFields:"Bitte füllen Sie alle erforderlichen Felder aus",passwordsDoNotMatch:"Passwörter stimmen nicht überein",passwordTooShort:"Passwort muss mindestens 8 Zeichen lang sein",passwordNeedsUppercase:"Passwort muss mindestens einen Großbuchstaben enthalten",passwordNeedsLowercase:"Passwort muss mindestens einen Kleinbuchstaben enthalten",passwordNeedsDigit:"Passwort muss mindestens eine Ziffer enthalten",passwordNeedsSpecial:"Passwort muss mindestens ein Sonderzeichen enthalten",enterGroupName:"Bitte geben Sie einen Gruppennamen ein",settingsSaved:"Einstellungen gespeichert",noPermissionUpdate:"Sie haben keine Berechtigung, Einstellungen zu ändern",cameraSettingsSaved:"Kamera-Einstellungen gespeichert",enterCameraUrl:"Bitte geben Sie eine Kamera-URL ein",passwordChanged:"Passwort erfolgreich geändert",connectionFailed:"Verbindung fehlgeschlagen",testFailed:"Test fehlgeschlagen",cameraConnected:"Kamera verbunden{{resolution}}"},testConnection:"Verbindung testen",catalog:{spoolCatalog:"Spulenkatalog",spoolCatalogDescription:"Leerspulengewichte nach Marke/Typ. Wird für die automatische Gewichtssuche beim Hinzufügen von Spulen verwendet.",searchCatalog:"Katalog durchsuchen...",addNewEntry:"Neuen Eintrag hinzufügen",namePlaceholder:"Name (z.B. Bambu Lab - Plastik)",weight:"Gewicht",type:"Typ",default:"Standard",custom:"Benutzerdefiniert",noMatch:"Keine Einträge entsprechen Ihrer Suche",empty:"Keine Einträge im Katalog",deleteEntry:"Eintrag löschen",deleteConfirm:'Möchten Sie "{{name}}" wirklich löschen?',resetCatalog:"Katalog zurücksetzen",resetConfirm:"Katalog auf Standardwerte zurücksetzen? Alle benutzerdefinierten Einträge werden entfernt.",loadFailed:"Spulenkatalog konnte nicht geladen werden",nameWeightRequired:"Name und Gewicht sind erforderlich",entryAdded:"Eintrag hinzugefügt",addFailed:"Eintrag konnte nicht hinzugefügt werden",entryUpdated:"Eintrag aktualisiert",updateFailed:"Eintrag konnte nicht aktualisiert werden",entryDeleted:"Eintrag gelöscht",deleteFailed:"Eintrag konnte nicht gelöscht werden",resetSuccess:"Katalog auf Standardwerte zurückgesetzt",resetFailed:"Katalog konnte nicht zurückgesetzt werden",exported:"{{count}} Einträge exportiert",imported:"{{added}} Einträge importiert ({{skipped}} übersprungen)",importFailed:"Import fehlgeschlagen: ungültiges JSON-Format",exportTooltip:"Katalog als JSON exportieren",importTooltip:"Katalog aus JSON importieren",resetTooltip:"Auf Standardwerte zurücksetzen",selectedCount:"{{count}} ausgewählt",deleteSelected:"Ausgewählte löschen",bulkDeleteConfirm:"Möchten Sie {{count}} Einträge wirklich löschen?",bulkDeleted:"{{count}} Einträge gelöscht",bulkDeleteFailed:"Fehler beim Löschen der Einträge",material:"Material",spoolWeight:"Spulengewicht",color:"Farbe",updateSpoolWeight:"Spulengewicht aktualisieren",filamentUpdated:"Filament aktualisiert",filamentUpdateFailed:"Filament konnte nicht aktualisiert werden",filamentUpdateInvalid:"Ungültige Filamentdaten",keepExistingSpoolWeight:"Altes Gewicht für bestehende Spulen behalten",keepExistingSpoolWeightDesc:"Bereits erstellte Spulen dieses Filamenttyps behalten das alte Leergewicht. Neue Spulen nutzen den neuen Wert.",applyToAllSpools:"Auf alle Spulen anwenden",applyToAllSpoolsDesc:"Alle Gewichtsberechnungen für diesen Filamenttyp nutzen sofort das neue Leergewicht."},colorCatalog:{title:"Farbkatalog",description:"Filamentfarben nach Hersteller/Material. Wird für die automatische Farbsuche beim Hinzufügen von Spulen verwendet.",searchColors:"Farben durchsuchen...",allManufacturers:"Alle Hersteller",addNewColor:"Neue Farbe hinzufügen",manufacturer:"Hersteller",colorName:"Farbname",hex:"Hex",materialOptional:"Material (optional)",showing:"{{filtered}} von {{total}} Farben angezeigt",noMatch:"Keine Farben entsprechen Ihrer Suche",empty:"Keine Farben im Katalog",deleteColor:"Farbe löschen",deleteConfirm:'Möchten Sie "{{name}}" wirklich löschen?',resetCatalog:"Farbkatalog zurücksetzen",resetConfirm:"Katalog auf Standardwerte zurücksetzen? Alle benutzerdefinierten Farben werden entfernt.",sync:"Synchron.",starting:"Starten...",syncTooltip:"Von FilamentColors.xyz synchronisieren (2000+ Farben)",loadFailed:"Farbkatalog konnte nicht geladen werden",fieldsRequired:"Hersteller, Farbname und Hex-Farbe sind erforderlich",colorAdded:"Farbe hinzugefügt",addFailed:"Farbe konnte nicht hinzugefügt werden",colorUpdated:"Farbe aktualisiert",updateFailed:"Farbe konnte nicht aktualisiert werden",colorDeleted:"Farbe gelöscht",deleteFailed:"Farbe konnte nicht gelöscht werden",resetSuccess:"Farbkatalog auf Standardwerte zurückgesetzt",resetFailed:"Katalog konnte nicht zurückgesetzt werden",syncUpToDate:"Bereits aktuell ({{count}} Farben geprüft)",syncComplete:"{{added}} neue Farben hinzugefügt ({{skipped}} bereits vorhanden)",syncError:"Sync-Fehler",syncFailed:"Synchronisierung von FilamentColors.xyz fehlgeschlagen",exported:"{{count}} Farben exportiert",imported:"{{added}} Farben importiert ({{skipped}} übersprungen)",importFailed:"Import fehlgeschlagen: ungültiges JSON-Format",selectedCount:"{{count}} ausgewählt",deleteSelected:"Ausgewählte löschen",bulkDeleteConfirm:"Möchten Sie {{count}} Farben wirklich löschen?",bulkDeleted:"{{count}} Farben gelöscht",bulkDeleteFailed:"Fehler beim Löschen der Farben"},dateFormat:"Datumsformat",dateFormatUs:"US (MM/TT/JJJJ)",dateFormatEu:"EU (TT/MM/JJJJ)",dateFormatIso:"ISO (JJJJ-MM-TT)",timeFormat:"Zeitformat",timeFormat12:"12-Stunden (3:30 PM)",timeFormat24:"24-Stunden (15:30)",defaultPrinter:"Standarddrucker",defaultPrinterDescription:"Diesen Drucker für Uploads, Nachdrucke und andere Vorgänge vorauswählen.",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"Elemente in der Seitenleiste per Drag & Drop neu anordnen. Hier auf Standardreihenfolge zurücksetzen.",setDefault:"Standard setzen",sidebarOrderSetDefaultHint:"Standard setzen übernimmt die aktuelle Menüreihenfolge für Benutzer, die ihre noch nicht angepasst haben.",sidebarDefaultSet:"Standard-Menüreihenfolge wurde festgelegt.",sidebarDefaultCleared:"Standard-Menüreihenfolge gelöscht.",sidebarDefaultFailed:"Festlegen der Standard-Menüreihenfolge fehlgeschlagen.",reset:"Zurücksetzen",darkMode:"Dunkelmodus",lightMode:"Hellmodus",active:"(aktiv)",background:"Hintergrund",accent:"Akzent",style:"Stil",bgNeutral:"Neutral",bgWarm:"Warm",bgCool:"Kühl",bgOled:"OLED Schwarz",bgSlate:"Schieferblau",bgForest:"Waldgrün",accentGreen:"Grün",accentTeal:"Türkis",accentBlue:"Blau",accentOrange:"Orange",accentPurple:"Lila",accentRed:"Rot",styleClassic:"Klassisch",styleGlow:"Leuchtend",styleVibrant:"Lebendig",themeToggleHint:"Zwischen Dunkel-, Hell- und Systemmodus mit dem Symbol in der Seitenleiste wechseln.",autoArchivePrints:"Drucke automatisch archivieren",autoArchiveDescription:"3MF-Dateien automatisch speichern, wenn Drucke abgeschlossen sind",saveThumbnailsDescription:"Vorschaubilder aus 3MF-Dateien extrahieren und speichern",captureFinishPhotoDescription:"Foto von der Druckerkamera aufnehmen, wenn der Druck abgeschlossen ist",ffmpegNotInstalled:"ffmpeg nicht installiert",ffmpegRequired:"Kameraaufnahme benötigt ffmpeg. Installieren über <brew>brew install ffmpeg</brew> (macOS) oder <apt>apt install ffmpeg</apt> (Linux).",camera:"Kamera",cameraViewMode:"Kamera-Ansichtsmodus",cameraOverlayDescription:"Kamera öffnet sich als größenveränderbares Overlay auf dem Hauptbildschirm",cameraWindowDescription:"Kamera öffnet sich in einem separaten Browserfenster",externalCamerasDescription:"Externe Kameras konfigurieren, um die eingebaute Druckerkamera zu ersetzen. Unterstützt MJPEG-Streams, RTSP, HTTP-Snapshots und USB-Kameras (V4L2). Wenn aktiviert, wird die externe Kamera für Live-Ansicht und Abschlussfotos verwendet.",cameraPlaceholderUsb:"Gerätepfad (/dev/video0)",cameraPlaceholderUrl:"Kamera-URL (rtsp://... oder http://...)",cameraTypeMjpeg:"MJPEG-Stream",cameraTypeRtsp:"RTSP-Stream",cameraTypeSnapshot:"HTTP-Snapshot",cameraTypeUsb:"USB-Kamera (V4L2)",cameraSnapshotUrl:"Snapshot-URL (optional)",cameraSnapshotUrlPlaceholder:"http://192.168.1.61:1984/api/frame.jpeg?src=printer",cameraSnapshotUrlHelp:"URL für Einzelbildaufnahmen — wird für Benachrichtigungs-Vorschaubilder, Abschlussfotos, Schicht-Zeitraffer und Plattenerkennung verwendet. Zeitraffer und Plattenerkennung benötigen jeweils eigene drucker-spezifische Schalter — diese URL ist nur die Bildquelle, die sie verwenden, wenn sie aktiv sind. Leer lassen, um Bilder aus dem oben konfigurierten Live-Stream zu verwenden. Nützlich für go2rtc (/api/frame.jpeg) und IP-Kameras mit dediziertem Snapshot-Endpunkt.",cameraRotation:"Drehung",test:"Testen",connected:"Verbunden",disconnected:"Getrennt",currency:"Währung",defaultFilamentCost:"Standard-Filamentkosten (pro kg)",electricityCost:"Stromkosten pro kWh",energyDisplayMode:"Energieanzeige-Modus",energyModePrintDescription:"Dashboard zeigt Summe der während Drucken verbrauchten Energie",energyModeTotalDescription:"Dashboard zeigt Gesamtenergie der Smart Plugs",fileManager:"Dateimanager",createArchiveEntry:"Archiveintrag beim Drucken erstellen",createArchiveEntryDescription:"Beim Drucken aus dem Dateimanager optional einen Archiveintrag erstellen",lowDiskSpaceWarning:"Warnung bei wenig Speicherplatz",lowDiskSpaceDescription:"Warnung anzeigen, wenn freier Speicherplatz unter diesen Schwellenwert fällt",printerFirmware:"Drucker-Firmware",checkFirmwareDescription:"Nach Firmware-Updates von Bambu Lab suchen",bambuddySoftware:"Bambuddy-Software",autoCheckDescription:"Automatisch beim Start nach neuen Versionen suchen",checkNow:"Jetzt prüfen",updateAvailableVersion:"Update verfügbar: v{{version}}",releaseNotes:"Versionshinweise",updateViaDocker:"Update über Docker Compose:",updateViaHomeAssistant:"Updates werden vom Home Assistant Supervisor verwaltet. Öffne Einstellungen → Add-ons → Bambuddy in Home Assistant, um die neue Version zu installieren.",installUpdate:"Update installieren",latestVersionRunning:"Sie verwenden die neueste Version",failedToCheckUpdates:"Update-Prüfung fehlgeschlagen: {{error}}",backupRestore:"Sicherung & Wiederherstellung",backupRestoreDescription:"Einstellungen exportieren/importieren und GitHub-Backup konfigurieren",goToBackup:"Zur Sicherung",externalUrl:"Externe URL",externalUrlDescription:"Die externe URL, unter der Bambuddy erreichbar ist. Wird für Benachrichtigungsbilder und externe Integrationen verwendet.",bambuddyUrl:"Bambuddy-URL",externalUrlHint:"Protokoll und Port angeben (z.B. http://192.168.1.100:8000)",ftpRetry:"FTP-Wiederholung",ftpRetryDescription:"FTP-Operationen bei unzuverlässigem Drucker-WLAN wiederholen. Gilt für 3MF-Downloads, Druck-Uploads, Zeitraffer-Downloads und Firmware-Updates.",autoRetryDescription:"Fehlgeschlagene FTP-Operationen automatisch wiederholen",retryAttempts:"Wiederholungsversuche",retryDelay:"Wiederholungsverzögerung",connectionTimeout:"Verbindungs-Timeout",time_one:"{{count}} Mal",time_other:"{{count}} Mal",second_one:"{{count}} Sekunde",second_other:"{{count}} Sekunden",nSeconds:"{{count}} Sekunden",increaseForWeakWifi:"Erhöhen für Drucker mit schwachem WLAN",homeAssistant:"Home Assistant",homeAssistantFullDescription:"Mit Home Assistant verbinden, um Smart Plugs über die HA REST-API zu steuern. Unterstützt Switch-, Light-, Input_Boolean- und Script-Entitäten.",homeAssistantUrl:"Home Assistant URL",longLivedAccessToken:"Langlebiges Zugriffstoken",haTokenHint:"Token in HA erstellen: Profil → Langlebige Zugriffstoken → Token erstellen",connectionSuccessful:"Verbindung erfolgreich",connectionFailed:"Verbindung fehlgeschlagen",haConnectionSuccess:"Erfolgreich mit Home Assistant verbunden.",haConnectionFailed:"Verbindung zu Home Assistant fehlgeschlagen.",mqttPublishing:"MQTT-Veröffentlichung",mqttDescription:"BamBuddy-Ereignisse an einen externen MQTT-Broker zur Integration mit Node-RED, Home Assistant und anderen Automatisierungssystemen veröffentlichen.",mqttEnableDescription:"Ereignisse an externen MQTT-Broker veröffentlichen",brokerHostname:"Broker-Hostname",port:"Port",usernameOptional:"Benutzername (optional)",passwordOptional:"Passwort (optional)",topicPrefix:"Topic-Präfix",topicPrefixHint:"Topics werden sein: {{prefix}}/printers/<serial>/status, etc.",prometheusMetrics:"Prometheus-Metriken",prometheusEndpointDescription:"Druckermetriken unter <code>/api/v1/metrics</code> für Prometheus/Grafana-Überwachung bereitstellen.",bearerTokenOptional:"Bearer-Token (optional)",bearerTokenHint:"Wenn gesetzt, müssen Anfragen <code>Authorization: Bearer <token></code> enthalten",metricsConnectionStatus:"Verbindungsstatus",metricsPrinterState:"Druckerstatus (idle/printing/etc)",metricsPrintProgress:"Druckfortschritt 0-100%",metricsBedTemp:"Betttemperatur",metricsNozzleTemp:"Düsentemperatur",metricsPrintsTotal:"Gesamtdrucke nach Ergebnis",metricsMore:"...und mehr (Schichten, Lüfter, Warteschlange, Filamentverbrauch)",smartPlugsDescription:"Smart Plugs (Tasmota oder Home Assistant) verbinden, um Stromsteuerung zu automatisieren und Energieverbrauch für Ihre Drucker zu verfolgen.",allOn:"Alle Ein",allOff:"Alle Aus",addSmartPlug:"Smart Plug hinzufügen",energySummary:"Energieübersicht",currentPower:"Aktuelle Leistung",plugsOnline:"{{reachable}}/{{total}} Plugs online",today:"Heute",yesterday:"Gestern",total:"Gesamt",enablePlugsForSummary:"Plugs aktivieren, um Energieübersicht zu sehen",addNotificationProvider:"Hinzufügen",systemBadge:"(System)",creating:"Erstellen...",changing:"Ändern...",deleteUserAndItems:"Benutzer UND dessen Elemente löschen",deleteUserKeepItems:"Benutzer löschen, Elemente behalten (werden herrenlos)",ok:"OK",twoFa:{totpTitle:"Authenticator-App (TOTP)",totpDesc:"Verwende eine Authenticator-App wie Google Authenticator, Aegis oder Authy.",emailOtpTitle:"E-Mail OTP",emailOtpDesc:"Sende einen Einmalcode an {{email}} beim Einloggen.",emailOtpNoEmail:"Füge eine E-Mail-Adresse zu deinem Konto hinzu, um diese Methode zu aktivieren.",addEmailFirst:"Dein Konto hat keine E-Mail-Adresse. Bitte einen Administrator, eine hinzuzufügen.",setupTotp:"Authenticator-App einrichten",setupAuthApp:"Authenticator-App einrichten",setupInstructions:"Scanne den QR-Code mit deiner Authenticator-App und bestätige mit einem Code.",manualEntry:"Kein Scanner? Gib dieses Secret manuell ein:",scannedContinue:"Code gescannt — weiter",enterCodeToConfirm:"Gib den 6-stelligen Code aus deiner Authenticator-App ein, um die Einrichtung zu bestätigen.",activate:"Aktivieren",disableTotp:"Authenticator deaktivieren",disableConfirmHint:"Gib einen gültigen TOTP-Code oder einen Backup-Code ein, um den Authenticator zu deaktivieren.",totpDisabled:"Authenticator-App deaktiviert.",emailOtpEnabled:"E-Mail OTP aktiviert.",emailOtpDisabled:"E-Mail OTP deaktiviert.",smtpRequired:"Bitte konfigurieren und testen Sie zuerst die SMTP-Einstellungen.",invalidCode:"Ungültiger Code. Bitte erneut versuchen.",enableEmailOtp:"E-Mail OTP aktivieren",disableEmailOtp:"E-Mail OTP deaktivieren",emailSetupEnterCode:"Ein Bestätigungscode wurde an Ihre E-Mail-Adresse gesendet. Geben Sie ihn unten ein, um zu bestätigen, dass Ihnen dieses Postfach gehört.",verifyAndEnable:"Verifizieren & Aktivieren",emailDisablePasswordHint:"Geben Sie Ihr Kontopasswort ein, um die Deaktivierung des E-Mail OTP zu bestätigen.",passwordPlaceholder:"Passwort eingeben",backupCodesTitle:"Backup-Codes sichern",backupCodesWarning:"Speichere diese Codes sicher. Jeder Code kann nur einmal verwendet werden und wird nicht erneut angezeigt.",backupCodesRemaining:"{{count}} Backup-Codes verbleibend",savedCodes:"Codes gespeichert",regenBackup:"Backup-Codes neu generieren",regenBackupHint:"Gib deinen aktuellen TOTP-Code ein, um 10 neue Backup-Codes zu generieren. Alle bestehenden Codes werden ungültig.",newBackupCodes:"Neue Backup-Codes",linkedAccounts:"Verknüpfte SSO-Konten",linkedAccountsDesc:"Diese externen Identitätsanbieter sind mit deinem Konto verknüpft.",oidcUnlinked:"Konto getrennt."},oidc:{title:"SSO / OIDC-Anbieter",desc:"Konfiguriere OpenID Connect-Anbieter für Single Sign-On.",addProvider:"Anbieter hinzufügen",newProvider:"Neuer Anbieter",empty:"Noch keine OIDC-Anbieter konfiguriert.",created:"Anbieter erstellt.",updated:"Anbieter aktualisiert.",deleted:"Anbieter gelöscht.",refreshIcon:"Icon neu laden",removeIcon:"Icon entfernen",iconRefreshed:"Icon aktualisiert.",iconRemoved:"Icon entfernt.",iconFetchFailed:"Icon konnte von der Anbieter-URL nicht geladen werden.",deleteTitle:"Anbieter löschen",deleteMessage:'"{{name}}" löschen? Alle verknüpften Benutzerkonten werden getrennt.',form:{name:"Anzeigename",issuerUrl:"Aussteller-URL",clientId:"Client-ID",clientSecret:"Client-Secret",scopes:"Bereiche",iconUrl:"Symbol-URL (optional)",enabled:"Aktiviert",autoCreate:"Benutzer automatisch anlegen",autoCreateDesc:"Erstellt beim ersten Login automatisch ein lokales Konto.",autoLink:"Bestehende Konten automatisch verknüpfen",autoLinkDesc:"Verknüpft beim ersten Login vorhandene lokale Konten anhand der E-Mail-Adresse.",secretHint:"leer lassen zum Beibehalten",secretPlaceholder:"neues Secret",emailClaim:"E-Mail-Claim",emailClaimDesc:"JWT-Claim für die E-Mail-Identität. Für Azure Entra ID 'preferred_username' oder 'upn' verwenden (sendet kein email_verified). Nur vertrauenswürdige Claim-Namen verwenden.",emailClaimPlaceholder:"E-Mail",emailClaimCustomClaimAutoLinkWarning:"Benutzerdefinierte Claims sind für die Auto-Verknüpfung nur sicher, wenn der Wert vom Mandanten verwaltet wird (z. B. Azure Entra ID upn / preferred_username). Aktiviere Auto-Verknüpfung nicht, wenn dein IdP Benutzern erlaubt, diesen Claim selbst zu setzen.",requireEmailVerified:"E-Mail-Verifizierung erforderlich",requireEmailVerifiedDesc:"E-Mail-Claim nur akzeptieren, wenn der Provider ihn als verifiziert markiert.",requireEmailVerifiedWarning:"Warnung: E-Mail wird auch ohne Verifizierung akzeptiert. Nur bei vertrauenswürdigen Providern verwenden.",requireEmailVerifiedAutoLink:"Auto-Verknüpfung zuerst deaktivieren, um diese Einstellung zu ändern.",defaultGroup:"Standardgruppe",defaultGroupDesc:"Gruppe, der automatisch erstellte Benutzer zugewiesen werden. Fallback auf Viewers, wenn nicht gesetzt.",defaultGroupViewersFallback:"Viewers (Standard)"}},encryption:{title:"MFA-Verschlüsselungsstatus",enabledFromEnv:"At-Rest-Verschlüsselung aktiv (Schlüssel aus Umgebungsvariable MFA_ENCRYPTION_KEY)",enabledFromFile:"At-Rest-Verschlüsselung aktiv (Schlüssel aus dem Datenverzeichnis geladen)",enabledGenerated:"At-Rest-Verschlüsselung aktiv mit automatisch generiertem Schlüssel",notConfigured:"At-Rest-Verschlüsselung nicht konfiguriert",notConfiguredDesc:"TOTP-Geheimnisse und OIDC-Client-Secrets werden im Klartext gespeichert. Setze MFA_ENCRYPTION_KEY oder starte Bambuddy mit beschreibbarem Datenverzeichnis neu, damit ein Schlüssel automatisch erzeugt wird.",allEncrypted:"Alle MFA-Geheimnisse sind verschlüsselt gespeichert.",legacyRowsLabel:"Klartext-Zeilen (Altbestand)",encryptedRowsLabel:"Verschlüsselte Zeilen",legacyRowsWarning:"{{count}} Klartext-Zeile(n) erkannt. Den OIDC-Provider neu speichern oder den Authenticator des Benutzers neu einrichten, um die Daten verschlüsselt abzulegen.",backupHint:"Der automatisch erzeugte Schlüssel liegt unter DATA_DIR/.mfa_encryption_key und wird in lokalen Backup-ZIPs mitgesichert. Backups sicher aufbewahren oder MFA_ENCRYPTION_KEY explizit setzen.",decryptionBrokenTitle:"Verschlüsselungsschlüssel fehlt",decryptionBrokenError:"{{count}} verschlüsselte Datensätze können nicht entschlüsselt werden, weil der Schlüssel nicht mehr verfügbar ist. Den vorherigen MFA_ENCRYPTION_KEY oder DATA_DIR/.mfa_encryption_key wiederherstellen.",migrationErrorWarning:"{{count}} Legacy-Eintrag/Einträge konnten beim Start nicht verschlüsselt werden. Prüfen Sie die Server-Logs und starten Sie Bambuddy neu."}},notification:{printStarted:{title:"Druck gestartet",body:"{{printer}}: {{filename}} wird gedruckt"},printCompleted:{title:"Druck abgeschlossen",body:"{{printer}}: {{filename}} erfolgreich abgeschlossen"},printFailed:{title:"Druck fehlgeschlagen",body:"{{printer}}: {{filename}} ist fehlgeschlagen"},printStopped:{title:"Druck gestoppt",body:"{{printer}}: {{filename}} wurde gestoppt"},printProgress:{title:"Druckfortschritt",body:"{{printer}}: {{filename}} ist zu {{percent}}% abgeschlossen"},printerOffline:{title:"Drucker offline",body:"{{printer}} ist offline"},printerError:{title:"Druckerfehler",body:"{{printer}} – {{error}}"},filamentLow:{title:"Filament niedrig",body:"{{printer}}: Filament geht zur Neige"},maintenanceDue:{title:"Wartung fällig",body:"{{printer}}: {{items}} benötigen Aufmerksamkeit"}},errors:{generic:"Etwas ist schiefgelaufen",networkError:"Netzwerkfehler. Bitte überprüfen Sie Ihre Verbindung.",notFound:"Nicht gefunden",unauthorized:"Nicht autorisiert",serverError:"Serverfehler",validationError:"Bitte überprüfen Sie Ihre Eingabe",printerConnectionFailed:"Verbindung zum Drucker fehlgeschlagen",saveFailed:"Speichern fehlgeschlagen",deleteFailed:"Löschen fehlgeschlagen",loadFailed:"Laden der Daten fehlgeschlagen"},hmsErrors:{title:"Fehler - {{name}}",noErrors:"Keine Fehler",viewOnWiki:"Im Bambu Lab Wiki ansehen",clearInstructions:"Löschen Sie die Fehler am Drucker, um sie hier zu entfernen.",clearErrors:"Fehler löschen",clearSuccess:"HMS-Fehler gelöscht",clearFailed:"HMS-Fehler konnten nicht gelöscht werden"},mqttDebug:{title:"MQTT-Debug-Protokoll",searchPlaceholder:"Topic oder Payload suchen...",noMessages:"Noch keine Nachrichten protokolliert",startLoggingHint:'Klicken Sie auf "Protokollierung starten", um MQTT-Nachrichten aufzuzeichnen',noMessagesMatch:"Keine Nachrichten entsprechen Ihrem Filter",adjustFilterHint:"Versuchen Sie, Ihre Such- oder Filterkriterien anzupassen",incoming:"Eingehend",outgoing:"Ausgehend",loggingStopped:"Protokollierung gestoppt",loggingActive:"Protokollierung aktiv - Nachrichten werden automatisch aktualisiert",startLogging:"Protokollierung starten",stopLogging:"Protokollierung stoppen",clearLog:"Protokoll löschen",topic:"Thema",timestamp:"Zeitstempel",direction:"Richtung",all:"Alle"},printerFiles:{title:"Dateimanager",storageUsed:"Belegt:",storageFree:"Frei:",filterPlaceholder:"Dateien filtern...",deleteButton:"Löschen",deleteFiles:"{{count}} Dateien löschen",deleteFileConfirm:'"{{name}}" löschen? Dies kann nicht rückgängig gemacht werden.',deleteFilesConfirm:"{{count}} ausgewählte Dateien löschen? Dies kann nicht rückgängig gemacht werden.",noFiles:"Keine Dateien auf dem Drucker",loadingFiles:"Dateien werden geladen...",failedToLoad:"Dateien konnten nicht geladen werden",toast:{filesDeleted:"{{count}} Datei(en) gelöscht",deleteFailed:"Löschen fehlgeschlagen: {{error}}"}},confirm:{delete:"Möchten Sie dies wirklich löschen?",unsavedChanges:"Sie haben ungespeicherte Änderungen. Möchten Sie wirklich verlassen?",clearQueue:"Möchten Sie die Warteschlange wirklich leeren?"},login:{title:"Bambuddy Anmeldung",subtitle:"Melden Sie sich bei Ihrem Konto an",username:"Benutzername",usernamePlaceholder:"Benutzername eingeben",usernameOrEmail:"Benutzername oder E-Mail",usernameOrEmailPlaceholder:"Benutzername oder @ E-Mail",password:"Passwort",passwordPlaceholder:"Passwort eingeben",signIn:"Anmelden",signingIn:"Anmeldung läuft...",rememberMe:"Angemeldet bleiben",forgotPassword:"Passwort vergessen?",loginSuccess:"Erfolgreich angemeldet",loginFailed:"Anmeldung fehlgeschlagen",enterCredentials:"Bitte Benutzername und Passwort eingeben",enterEmail:"Bitte geben Sie Ihre E-Mail-Adresse ein",oidcLoginFailed:"OIDC-Anmeldung fehlgeschlagen",oidcErrors:{providerError:"Der Identity-Provider hat einen Fehler zurückgegeben",missingParameters:"Dem OIDC-Callback fehlen erforderliche Parameter",invalidState:"OIDC-State ist ungültig oder wurde bereits verwendet",stateExpired:"OIDC-Sitzung abgelaufen — bitte erneut versuchen",providerNotFound:"OIDC-Provider nicht gefunden",discoveryFailed:"OIDC-Discovery-Dokument konnte nicht abgerufen werden",invalidDiscovery:"OIDC-Discovery-Dokument ist ungültig",networkError:"Netzwerkfehler beim OIDC-Token-Austausch",badResponse:"Unerwartete Antwort beim OIDC-Token-Austausch",noIdToken:"OIDC-Provider hat kein ID-Token zurückgegeben",validationFailed:"OIDC-Token-Validierung fehlgeschlagen",nonceMismatch:"OIDC-Nonce stimmt nicht überein — möglicher Replay-Angriff",missingSubClaim:"OIDC-Token enthält keinen Sub-Claim",noLinkedAccount:"Kein lokales Konto mit dieser OIDC-Identität verknüpft",accountInactive:"Ihr Konto ist inaktiv",userResolutionFailed:"Ihr Konto konnte nicht aufgelöst werden",internalError:"Interner Fehler beim OIDC-Login",tokenExchangeFailed:"OIDC-Token-Austausch fehlgeschlagen"},forgotPasswordTitle:"Passwort vergessen",forgotPasswordMessage:"Wenn Sie Ihr Passwort vergessen haben, wenden Sie sich bitte an Ihren Systemadministrator.",forgotPasswordEmailMessage:"Geben Sie Ihre E-Mail-Adresse ein und wir senden Ihnen ein neues Passwort.",emailAddress:"E-Mail-Adresse",emailPlaceholder:"ihre.email@beispiel.de",cancel:"Abbrechen",sending:"Wird gesendet...",sendResetEmail:"Zurücksetzungs-E-Mail senden",howToReset:"So setzen Sie Ihr Passwort zurück:",resetStep1:"Kontaktieren Sie Ihren Bambuddy-Administrator",resetStep2:"Bitten Sie ihn, Ihr Passwort in der Benutzerverwaltung zurückzusetzen",resetStep3:"Er kann ein neues temporäres Passwort für Sie festlegen",resetStep4:"Melden Sie sich mit dem neuen Passwort an und ändern Sie es in den Einstellungen",gotIt:"Verstanden",resetPassword:{title:"Neues Passwort festlegen",subtitle:"Geben Sie unten Ihr neues Passwort ein und bestätigen Sie es.",newPassword:"Neues Passwort",newPasswordPlaceholder:"Mindestens 8 Zeichen",confirmPassword:"Passwort bestätigen",confirmPasswordPlaceholder:"Neues Passwort wiederholen",saving:"Wird gespeichert…",submit:"Neues Passwort festlegen",backToLogin:"Zurück zur Anmeldung",passwordsDoNotMatch:"Passwörter stimmen nicht überein",passwordTooShort:"Passwort muss mindestens 8 Zeichen lang sein",resetFailed:"Passwort zurücksetzen fehlgeschlagen. Der Link ist möglicherweise abgelaufen."},twoFA:{title:"Zwei-Faktor-Authentifizierung",subtitle:"Ihr Konto ist mit 2FA geschützt. Geben Sie unten den Bestätigungscode ein.",methodAuthenticator:"Authenticator-App",methodEmail:"E-Mail-Code",methodBackup:"Wiederherstellungscode",instructionsTotp:"Öffnen Sie Ihre Authenticator-App und geben Sie den 6-stelligen Code für Bambuddy ein.",instructionsEmail:"Ein 6-stelliger Code wurde an Ihre E-Mail-Adresse gesendet. Er ist 10 Minuten gültig.",instructionsEmailNotSent:"Klicken Sie unten, um einen Bestätigungscode per E-Mail zu erhalten.",instructionsBackup:"Geben Sie einen Ihrer 8-stelligen Wiederherstellungscodes ein. Jeder Code kann nur einmal verwendet werden.",sendCodeButton:"Code per E-Mail senden",sendingCode:"Wird gesendet...",resendCode:"Code erneut senden",codeLabel:"Bestätigungscode",backupCodeLabel:"Wiederherstellungscode",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"Bestätigen",verifyingButton:"Wird überprüft...",backToLogin:"← Zurück zur Anmeldung",orContinueWith:"oder anmelden mit",signInWith:"Anmelden mit {{provider}}",enterCode:"Bitte geben Sie den Bestätigungscode ein",sendCodeFailed:"Bestätigungscode konnte nicht gesendet werden",invalidCode:"Ungültiger Code. Bitte erneut versuchen."}},setup:{title:"Bambuddy Einrichtung",subtitle:"Konfigurieren Sie die Authentifizierung für Ihre Bambuddy-Instanz",enableAuth:"Authentifizierung aktivieren",adminAccount:"Admin-Konto",adminAccountDesc:"Wenn bereits Admin-Benutzer existieren, wird die Authentifizierung mit den vorhandenen Admin-Konten aktiviert. Lassen Sie die Felder unten leer, um vorhandene Admins zu verwenden, oder geben Sie neue Anmeldedaten ein, um einen neuen Admin-Benutzer zu erstellen.",adminUsername:"Admin-Benutzername",adminPassword:"Admin-Passwort",optionalIfAdminExists:"(optional, wenn Admin-Benutzer existieren)",adminUsernamePlaceholder:"Admin-Benutzernamen eingeben (optional)",adminPasswordPlaceholder:"Admin-Passwort eingeben (optional)",confirmPassword:"Passwort bestätigen",confirmPasswordPlaceholder:"Admin-Passwort bestätigen",settingUp:"Einrichtung läuft...",completeSetup:"Einrichtung abschließen",toast:{authEnabledAdminCreated:"Authentifizierung aktiviert und Admin-Benutzer erstellt",authEnabledExistingAdmins:"Authentifizierung mit vorhandenen Admin-Benutzern aktiviert",setupCompleted:"Einrichtung abgeschlossen",enterBothCredentials:"Bitte geben Sie sowohl Admin-Benutzernamen als auch Passwort ein, oder lassen Sie beide leer, um vorhandene Admin-Benutzer zu verwenden",passwordsDoNotMatch:"Passwörter stimmen nicht überein",passwordTooShort:"Passwort muss mindestens 6 Zeichen lang sein"}},changePassword:{title:"Passwort ändern",currentPassword:"Aktuelles Passwort",currentPasswordPlaceholder:"Aktuelles Passwort eingeben",newPassword:"Neues Passwort",newPasswordPlaceholder:"Neues Passwort eingeben (min. 6 Zeichen)",confirmPassword:"Neues Passwort bestätigen",confirmPasswordPlaceholder:"Neues Passwort bestätigen",passwordsDoNotMatch:"Passwörter stimmen nicht überein",passwordTooShort:"Passwort muss mindestens 6 Zeichen lang sein",changing:"Wird geändert...",success:"Passwort erfolgreich geändert",failed:"Passwortänderung fehlgeschlagen"},plateAlert:{title:"Druck pausiert!",message:"Objekte auf dem Druckbett erkannt. Der Druck wurde automatisch pausiert. Bitte räumen Sie das Druckbett und setzen Sie den Druck fort.",understand:"Verstanden"},camera:{title:"Kameraansicht",invalidPrinterId:"Ungültige Drucker-ID",live:"Live",snapshot:"Schnappschuss",restartStream:"Stream neu starten",refreshSnapshot:"Schnappschuss aktualisieren",fullscreen:"Vollbild",exitFullscreen:"Vollbild beenden",connectingToCamera:"Verbinde mit Kamera...",capturingSnapshot:"Schnappschuss wird aufgenommen...",connectionLost:"Verbindung verloren",connectionFailed:"Kameraverbindung fehlgeschlagen",reconnecting:"Neuverbindung in {{countdown}}s... (Versuch {{attempt}}/{{max}})",reconnectNow:"Jetzt verbinden",cameraUnavailable:"Kamera nicht verfügbar",cameraUnavailableDesc:"Stellen Sie sicher, dass der Drucker eingeschaltet und verbunden ist.",noCamera:"Keine Kamera verfügbar",retry:"Erneut versuchen",cameraStream:"Kamera-Stream",zoomOut:"Verkleinern",zoomIn:"Vergrößern",resetZoom:"Zoom zurücksetzen",recording:"Aufnahme",startRecording:"Aufnahme starten",stopRecording:"Aufnahme stoppen",chamberLight:"Kammerbeleuchtung umschalten",unavailable:"Kamera nicht verfügbar",diagnose:{button:"Diagnose",modalTitle:"Kamera-Diagnose",running:"Diagnose läuft...",runFailed:"Diagnose konnte nicht ausgeführt werden: {{error}}",retry:"Erneut ausführen",stage:{tcp_reachable:"Netzwerk-Erreichbarkeit",first_frame:"Bilderfassung",live_stream_active:"Live-Stream aktiv"},summary:{all_ok:"Kamera funktioniert. Die Diagnose hat alle Phasen erfolgreich abgeschlossen.",live_stream_active_healthy:"Kamera streamt gerade mit aktuellen Bildern — kein Test nötig.",printer_unreachable:"Drucker ist nicht erreichbar. Prüfe IP-Adresse, Netzwerkverbindung und ob der Drucker eingeschaltet ist.",camera_port_closed:"Drucker ist erreichbar, aber der Kamera-Port ist geschlossen. Stelle sicher, dass LAN-Modus und Entwicklermodus in den Druckereinstellungen aktiviert sind.",no_frame:"Verbindung zur Kamera hergestellt, aber keine Bilder empfangen. Versuche es erneut oder prüfe, ob die Kamera in den Druckereinstellungen aktiviert ist.",unknown_failure:"Kamera-Diagnose aus unbekanntem Grund fehlgeschlagen. Prüfe das Support-Log für Details."},meta:{protocol:"Protokoll",port:"Port",profile:"Profil"}}},groups:{title:"Gruppenverwaltung",subtitle:"Berechtigungsgruppen für Zugriffskontrolle verwalten",backToSettings:"Zurück zu Einstellungen",createGroup:"Gruppe erstellen",noPermission:"Sie haben keine Berechtigung, auf diese Seite zuzugreifen.",system:"System",noDescription:"Keine Beschreibung",usersCount:"{{count}} Benutzer",permissionsCount:"{{count}} Berechtigungen",edit:"Bearbeiten",delete:"Löschen",toast:{created:"Gruppe erfolgreich erstellt",updated:"Gruppe erfolgreich aktualisiert",deleted:"Gruppe erfolgreich gelöscht",enterGroupName:"Bitte geben Sie einen Gruppennamen ein"},modal:{editGroup:"Gruppe bearbeiten",createGroup:"Gruppe erstellen",cancel:"Abbrechen",saving:"Speichern...",creating:"Erstellen...",saveChanges:"Änderungen speichern"},form:{groupName:"Gruppenname",groupNamePlaceholder:"Gruppennamen eingeben",systemGroupWarning:"Systemgruppennamen können nicht geändert werden",description:"Beschreibung",descriptionPlaceholder:"Beschreibung eingeben (optional)",permissions:"Berechtigungen ({{count}} ausgewählt)"},deleteModal:{title:"Gruppe löschen",message:"Sind Sie sicher, dass Sie diese Gruppe löschen möchten? Benutzer in dieser Gruppe verlieren diese Berechtigungen.",confirm:"Gruppe löschen"},editor:{title:"Gruppe bearbeiten",createTitle:"Gruppe erstellen",search:"Berechtigungen suchen...",selectAll:"Alle auswählen",clearAll:"Alle abwählen",permissionsSelected:"{{count}} ausgewählt",noResults:"Keine Berechtigungen entsprechen Ihrer Suche"}},users:{title:"Benutzerverwaltung",subtitle:"Benutzer und deren Zugriff auf Ihre Bambuddy-Instanz verwalten",backToSettings:"Zurück zu Einstellungen",createUser:"Benutzer erstellen",noPermission:"Sie haben keine Berechtigung, auf diese Seite zuzugreifen.",admin:"Admin",noGroups:"Keine Gruppen",active:"Aktiv",inactive:"Inaktiv",edit:"Bearbeiten",delete:"Löschen",system:"System",noGroupsAvailable:"Keine Gruppen verfügbar",table:{username:"Benutzername",groups:"Gruppen",status:"Status",actions:"Aktionen"},toast:{created:"Benutzer erfolgreich erstellt",updated:"Benutzer erfolgreich aktualisiert",deleted:"Benutzer erfolgreich gelöscht",fillRequired:"Bitte füllen Sie alle Pflichtfelder aus",passwordsDoNotMatch:"Passwörter stimmen nicht überein",passwordTooShort:"Passwort muss mindestens 6 Zeichen lang sein",ldapProvisioned:'LDAP-Benutzer „{{username}}" bereitgestellt'},modal:{createUser:"Benutzer erstellen",editUser:"Benutzer bearbeiten",cancel:"Abbrechen",creating:"Erstellen...",saving:"Speichern...",saveChanges:"Änderungen speichern",advancedAuthSubtitle:"mit erweiterter Authentifizierung",tabsAriaLabel:"Benutzerquelle",localTab:"Lokal",ldapTab:"LDAP",ldapSearchLabel:"Verzeichnis durchsuchen",ldapSearchPlaceholder:"Benutzername, Name oder E-Mail eingeben...",ldapMinChars:"Mindestens 2 Zeichen für die Suche eingeben",ldapTypeToSearch:"Tippen, um das LDAP-Verzeichnis zu durchsuchen",ldapSearching:"Verzeichnis wird durchsucht...",ldapNoResults:"Keine passenden Benutzer im Verzeichnis",ldapSearchError:"Verzeichnissuche fehlgeschlagen. Bitte LDAP-Server-Status prüfen.",ldapAlreadyProvisioned:"Bereits bereitgestellt",ldapSelectedLabel:"Ausgewählt",ldapProvision:"Benutzer bereitstellen",ldapProvisioning:"Wird bereitgestellt...",ldapErrorProvision:"Bereitstellung fehlgeschlagen. Bitte LDAP-Server-Status prüfen und erneut versuchen."},form:{username:"Benutzername",usernamePlaceholder:"Benutzernamen eingeben",email:"E-Mail",emailPlaceholder:"benutzer@beispiel.de",password:"Passwort",passwordPlaceholder:"Passwort eingeben",confirmPassword:"Passwort bestätigen",confirmPasswordPlaceholder:"Passwort bestätigen",newPasswordPlaceholder:"Neues Passwort eingeben",confirmNewPasswordPlaceholder:"Neues Passwort bestätigen",leaveBlankToKeep:"leer lassen, um das aktuelle zu behalten",groups:"Gruppen",optional:"optional",autoGeneratedPassword:"Ein sicheres Passwort wird automatisch generiert und per E-Mail an den Benutzer gesendet.",passwordManagedByAdvancedAuth:'Das Passwort wird durch erweiterte Authentifizierung verwaltet. Verwenden Sie "Passwort zurücksetzen", um ein neues Passwort per E-Mail an den Benutzer zu senden.',resetPassword:"Passwort zurücksetzen",resettingPassword:"Passwort wird zurückgesetzt..."},deleteModal:{title:"Benutzer löschen",message:"Sind Sie sicher, dass Sie diesen Benutzer löschen möchten? Diese Aktion kann nicht rückgängig gemacht werden.",confirm:"Benutzer löschen"}},streamOverlay:{title:"Stream-Overlay",invalidPrinterId:"Ungültige Drucker-ID",cameraStream:"Kamera-Stream",progress:"Fortschritt",eta:"ETA",printerIdle:"Drucker ist inaktiv",printerOffline:"Drucker offline",status:{printing:"Druckt",paused:"Pausiert",finished:"Fertig",failed:"Fehlgeschlagen",idle:"Inaktiv",unknown:"Unbekannt"}},profiles:{title:"Profile",subtitle:"Verwalten Sie Ihre Slicer-Voreinstellungen und Druckvorschub-Kalibrierungen",tabs:{bambuCloud:"Bambu Cloud",orcaCloud:"Orca Cloud",local:"Lokale Profile",kprofiles:"K-Profile"},orcaCloud:{connectedAs:"Verbunden als",logout:"Trennen",noLogoutPermission:"Sie haben keine Berechtigung zum Trennen",noConnectPermission:"Sie haben keine Berechtigung, sich mit Orca Cloud zu verbinden",retry:"Erneut versuchen",back:"Andere Anmeldemethode verwenden",connect:{title:"Mit Orca Cloud verbinden",description:"Melden Sie sich bei Ihrem Orca Cloud-Konto an, um Ihre Slicer-Profile in Bambuddy zu synchronisieren."},providers:{google:"Mit Google anmelden",apple:"Mit Apple anmelden",github:"Mit GitHub anmelden",email:"Mit E-Mail und Passwort anmelden"},password:{title:"Mit E-Mail und Passwort anmelden",email:"E-Mail",emailPlaceholder:"sie@beispiel.de",password:"Passwort",submit:"Anmelden"},paste:{title:"Anmeldung abschließen",step1:"Ein neuer Tab wurde mit der Orca Cloud-Anmeldeseite geöffnet. Melden Sie sich mit Ihrem Orca-Konto an.",step2:'Ihr Browser wird zu einer "localhost"-URL umgeleitet, die nicht geladen werden kann. Das ist normal — die URL ist es, was wir brauchen.',step3:"Kopieren Sie die gesamte URL aus der Adressleiste Ihres Browsers und fügen Sie sie unten ein.",signInUrl:"Falls sich der Anmelde-Tab nicht geöffnet hat, klicken Sie auf diese URL:",label:"Callback-URL hier einfügen",placeholder:"http://localhost:41172/callback?code=...&state=...",submit:"Verbindung abschließen"},profiles:{title:"Ihre Orca Cloud-Profile ({{count}})",refresh:"Aktualisieren",empty:"Noch keine Profile in Ihrem Orca Cloud-Konto gefunden."},toast:{connected:"Mit Orca Cloud verbunden als {{email}}",disconnected:"Verbindung zu Orca Cloud getrennt"},errors:{startFailed:"Anmeldevorgang für Orca Cloud konnte nicht gestartet werden.",finishFailed:"Orca Cloud-Anmeldung konnte nicht abgeschlossen werden.",passwordFailed:"Anmeldung mit dieser E-Mail und diesem Passwort fehlgeschlagen.",passwordEmpty:"Bitte geben Sie sowohl E-Mail als auch Passwort ein.",emptyPaste:"Bitte fügen Sie die Callback-URL aus Ihrem Browser ein.",noCode:"Diese URL sieht nicht wie ein Orca Cloud-Callback aus (kein code-Parameter). Kopieren Sie die vollständige URL aus der Adressleiste."}},localProfiles:{title:"Lokale Profile",subtitle:"Slicer-Voreinstellungen aus OrcaSlicer importieren und verwalten",import:"Profile importieren",importDesc:".bbscfg-, .bbsflmt-, .orca_filament-, .zip- oder .json-Dateien hier ablegen",importing:"Importiere...",search:"Lokale Voreinstellungen durchsuchen...",noPresets:"Noch keine lokalen Voreinstellungen",noSearchResults:"Keine Voreinstellungen entsprechen deiner Suche",badge:"Lokal",edit:"Bearbeiten",delete:"Löschen",cancel:"Abbrechen",deleteConfirmTitle:"Voreinstellung löschen",deleteConfirm:"Möchten Sie diese Voreinstellung wirklich löschen? Dies kann nicht rückgängig gemacht werden.",source:"Quelle",inheritsFrom:"Erbt von",filamentType:"Typ",vendor:"Hersteller",compatiblePrinters:"Drucker",nozzleTemp:"Düsentemperatur",cost:"Kosten",density:"Dichte",pressureAdvance:"Druckvorschub",filament:"Filament",process:"Prozess",printer:"Drucker",toast:{importSuccess:"{{count}} Voreinstellung(en) importiert",importSkipped:"{{count}} Voreinstellung(en) übersprungen (Duplikate)",importError:"{{count}} Fehler beim Import",deleted:"Voreinstellung gelöscht",updated:"Voreinstellung aktualisiert"}},connectedAs:"Verbunden als",logout:"Abmelden",noLogoutPermission:"Sie haben keine Berechtigung zum Abmelden",failedToLoad:"Profile konnten nicht geladen werden",retry:"Erneut versuchen",time:{justNow:"Gerade eben",minsAgo:"vor {{count}}m",hoursAgo:"vor {{count}}h",daysAgo:"vor {{count}}d"},toast:{loggedOut:"Abgemeldet"},login:{title:"Mit Bambu Cloud verbinden",subtitle:"Synchronisieren Sie Ihre Slicer-Voreinstellungen geräteübergreifend",email:"E-Mail",password:"Passwort",region:"Region",regionGlobal:"Global",regionChina:"China",verificationCode:"Bestätigungscode",totpCode:"Authenticator-Code",checkEmail:"Prüfen Sie Ihre E-Mail ({{email}}) für einen 6-stelligen Code",enterTotpHint:"Geben Sie den 6-stelligen Code aus Ihrer Authenticator-App ein",accessToken:"Zugriffstoken",accessTokenHint:"Fügen Sie Ihr Bambu-Cloud-Zugriffstoken ein. Konten der Region China müssen diesen Weg nutzen (telefonnummerngebunden — kein E-Mail-Login). Im Wiki steht, wie Sie das Token aus den MakerWorld-Cookies auslesen.",back:"Zurück",loginButton:"Anmelden",verifyButton:"Bestätigen",setTokenButton:"Token setzen",useToken:"Stattdessen Zugriffstoken verwenden",useEmail:"Stattdessen mit E-Mail anmelden",toast:{loggedIn:"Erfolgreich angemeldet",codeSent:"Bestätigungscode an Ihre E-Mail gesendet",enterTotp:"Geben Sie den Code aus Ihrer Authenticator-App ein",tokenSet:"Token erfolgreich gesetzt"}},presets:{myPreset:"Mein Profil (bearbeitbar)",duplicate:"Duplizieren",editable:"Bearbeitbar",failedToLoadDetails:"Profil-Details konnten nicht geladen werden",deleteConfirm:"Dieses Profil löschen?",deleteWarning:'"{{name}}" wird dauerhaft aus Bambu Cloud gelöscht. Dies kann nicht rückgängig gemacht werden.',noDuplicatePermission:"Sie haben keine Berechtigung zum Duplizieren von Profilen",noEditPermission:"Sie haben keine Berechtigung zum Bearbeiten von Profilen",noDeletePermission:"Sie haben keine Berechtigung zum Löschen von Profilen",types:{filament:"Filament-Profil",printer:"Drucker-Profil",process:"Prozess-Profil"},toast:{deleted:"Profil gelöscht",created:"Profil erstellt",updated:"Profil aktualisiert",duplicated:"Profil dupliziert",fieldAdded:'Feld "{{key}}" hinzugefügt',exported:"Profil exportiert"},baseLabel:"Basis: {{name}}",currentLabel:"Aktuell: {{name}}",newPreset:"Neues Profil",editPreset:"Profil bearbeiten",duplicatePreset:"Profil duplizieren",createNewPreset:"Neues Profil erstellen",customizeSettings:"Passen Sie die Einstellungen für Ihr neues Profil an",compareWithBase:"Mit Basis-Profil vergleichen",compare:"Vergleichen",basePreset:"Basis-Profil",selectBasePreset:"Basis-Profil auswählen...",presetName:"Profilname",myCustomPreset:"Mein eigenes Profil",inheritsFrom:"Erbt von",dropJsonToImport:"JSON zum Importieren ablegen",tabs:{common:"Allgemein",allFields:"Alle Felder"},availableFields:"Verfügbare Felder",searchFieldsPlaceholder:"Felder suchen...",noMatchingFields:"Keine passenden Felder",allFieldsAdded:"Alle Felder hinzugefügt",addCustomField:"Eigenes Feld hinzufügen",yourOverrides:"Ihre Überschreibungen",noOverridesYet:"Noch keine Überschreibungen",clickFieldsToAdd:"Klicken Sie links auf Felder, um sie hinzuzufügen",saveAsTemplate:"Als Vorlage speichern",jsonTip:"Tipp: Ziehen Sie eine .json-Datei auf dieses Fenster, um Einstellungen zu importieren"},cloudView:{searchPlaceholder:"Profile suchen...",templates:"Vorlagen",refresh:"Aktualisieren",newPreset:"Neues Profil",clearFilters:"Filter zurücksetzen",compareMode:"Vergleichsmodus",selectAnotherPreset:"Wählen Sie ein weiteres {{type}}-Profil",clickTwoPresets:"Klicken Sie auf zwei Profile des gleichen Typs zum Vergleichen",selectFirst:"1. Erstes auswählen",selectSecond:"2. Zweites auswählen",compareNow:"Jetzt vergleichen",lastSynced:"Zuletzt synchronisiert:",showingCount:"{{showing}} von {{total}} Profilen",noPresetsFound:"Keine Profile gefunden",columns:{filament:"Filament",process:"Prozess",printer:"Drucker"},noFilamentPresets:"Keine Filament-Profile",noProcessPresets:"Keine Prozess-Profile",noPrinterPresets:"Keine Drucker-Profile",filters:{type:"Typ",owner:"Besitzer",printer:"Drucker",nozzle:"Düse",filament:"Filament",layer:"Schicht",all:"Alle",myPresets:"Meine Profile",builtIn:"Voreingestellt",process:"Prozess"},noTemplatesPermission:"Sie haben keine Berechtigung, Vorlagen zu verwalten",noRefreshPermission:"Sie haben keine Berechtigung, Profile zu aktualisieren",noCreatePermission:"Sie haben keine Berechtigung, Profile zu erstellen"},templates:{title:"Schnellvorlagen",noTemplates:"Noch keine Vorlagen",createFirst:"Erstellen Sie Vorlagen aus dem Preset-Editor",typeFilter:"Typ:",deleteTitle:"Vorlage löschen",deleteWarning:"Diese Aktion kann nicht rückgängig gemacht werden",deleteConfirm:'Möchten Sie "{{name}}" wirklich löschen?',namePlaceholder:"Vorlagenname",descriptionPlaceholder:"Beschreibung",settingsJson:"Einstellungen (JSON)",fieldsCount:"{{count}} Felder",shownInModals:"In Dialogen angezeigt",hiddenInModals:"In Dialogen ausgeblendet",apply:"Anwenden",toast:{deleted:"Vorlage gelöscht",updated:"Vorlage aktualisiert",created:"Vorlage erstellt",applied:"Vorlage angewendet"}}},support:{debugLoggingActive:"Debug-Protokollierung ist aktiv",manageLogs:"Verwalten",collectItem7:"Drucker-Verbindungsstatus und Firmware-Versionen",collectItem8:"Integrationsstatus (Spoolman, MQTT, HA)",collectItem9:"Netzwerkschnittstellen (nur Subnetze)",collectItem10:"Python-Paketversionen",collectItem11:"Datenbankzustandsprüfungen",collectItem12:"Docker-Umgebungsdetails",bundleGenerating:"Bundle wird erstellt...",bundleStepConnection:"Drucker-Verbindungsprüfungen werden ausgeführt",bundleStepVirtualPrinters:"Setup-Prüfungen für virtuelle Drucker werden ausgeführt",bundleStepLogScan:"Aktuelle Protokolle werden auf bekannte Probleme überprüft",bundleStepBuild:"Support-Bundle-ZIP wird erstellt"},fileManager:{title:"Dateimanager",subtitle:"Organisieren und verwalten Sie Ihre Druckdateien",uploadFiles:"Dateien hochladen",newFolder:"Neuer Ordner",folderName:"Ordnername",folderNamePlaceholder:"z.B. Funktionsteile",renameFile:"Datei umbenennen",renameFolder:"Ordner umbenennen",invalidFilenameChar:'Das Zeichen "{{char}}" ist in Druck-Dateinamen nicht erlaubt. Die SD-Karte des Druckers lehnt folgende Zeichen ab: < > : " / \\ | ? *',moveFiles:"{{count}} Datei(en) verschieben",rootNoFolder:"Stammverzeichnis (Kein Ordner)",current:"aktuell",linkFolder:"Ordner verknüpfen",linkFolderDescription:'"{{name}}" mit einem Projekt oder Archiv verknüpfen für schnellen Zugriff.',project:"Projekt",archive:"Archiv",noProjectsFound:"Keine Projekte gefunden",noArchivesFound:"Keine Archive gefunden",unlink:"Verknüpfung aufheben",link:"Verknüpfen",dragDropFiles:"Dateien hierher ziehen",dropFilesHere:"Dateien hier ablegen",orClickToBrowse:"oder klicken zum Durchsuchen",allFileTypesSupported:"Alle Dateitypen werden unterstützt. ZIP-Dateien werden extrahiert.",zipFilesDetected:"ZIP-Dateien erkannt",zipExtractOptions:"ZIP-Dateien werden extrahiert. Wählen Sie, wie die Ordnerstruktur behandelt werden soll:",preserveZipStructure:"Ordnerstruktur aus ZIP beibehalten",createFolderFromZip:"Ordner aus ZIP-Dateiname erstellen",stlThumbnailGeneration:"STL-Vorschaubildgenerierung",zipMayContainStl:"ZIP-Dateien können STL-Dateien enthalten. Vorschaubilder können während der Extraktion generiert werden.",thumbnailsCanBeGenerated:"Vorschaubilder können für STL-Dateien generiert werden. Große Modelle benötigen möglicherweise mehr Zeit.",generateThumbnailsForStl:"Vorschaubilder für STL-Dateien generieren",threemfDetected:"3MF-Dateien erkannt",threemfExtractionInfo:"Druckermodell, Material, Farbe und Druckeinstellungen werden automatisch aus 3MF-Dateien extrahiert.",willBeExtracted:"Wird extrahiert",filesExtracted:"{{count}} Dateien extrahiert",uploadComplete:"Upload abgeschlossen: {{succeeded}} erfolgreich",uploadFailed:"Hochladen fehlgeschlagen",zipFilesFailed:"{{count}} Dateien fehlgeschlagen",uploading:"Hochladen...",changeLink:"Verknüpfung ändern...",linkTo:"Verknüpfen mit...",linkToProjectOrArchive:"Mit Projekt oder Archiv verknüpfen",addToQueue:"Zur Warteschlange",schedulePrint:"Planen",generateThumbnail:"Vorschaubild generieren",generateThumbnails:"Vorschaubilder generieren",generateThumbnailsForMissing:"Vorschaubilder für STL-Dateien ohne Vorschau generieren",gridView:"Rasteransicht",listView:"Listenansicht",lowDiskSpaceWarning:"Warnung: Wenig Speicherplatz",lowDiskSpaceDetails:"Nur {{free}} frei von {{total}} gesamt. Schwellenwert ist auf {{threshold}} GB eingestellt.",files:"Dateien",folders:"Ordner",size:"Größe",free:"Frei",allFiles:"Alle Dateien",allExternal:"Extern",externalIsEmpty:"Keine externen Dateien",externalEmptyDescription:"Dateien aus deinen verknüpften externen Ordnern erscheinen hier.",wrap:"Umbrechen",enableTextWrapping:"Textumbruch aktivieren",disableTextWrapping:"Textumbruch deaktivieren",collapse:"Einklappen",collapseFoldersByDefault:"Ordner standardmäßig einklappen",expandFoldersByDefault:"Ordner standardmäßig ausklappen",dragToResizeTooltip:"Ziehen zum Ändern der Größe, Doppelklick zum Zurücksetzen",searchFiles:"Dateien suchen...",allTypes:"Alle Typen",prints:"Drucke",ascending:"Aufsteigend",descending:"Absteigend",resultsCount:"{{showing}} von {{total}} Dateien",selectAll:"Alle auswählen",deselectAll:"Auswahl aufheben",selected:"{{count}} ausgewählt",adding:"Hinzufügen...",loadingFiles:"Dateien werden geladen...",folderIsEmpty:"Ordner ist leer",noFilesYet:"Noch keine Dateien",folderEmptyDescription:"Laden Sie Dateien hoch oder verschieben Sie Dateien in diesen Ordner.",noFilesDescription:"Laden Sie Dateien hoch, um Ihre Druckdateien zu organisieren.",noMatchingFiles:"Keine passenden Dateien",noMatchingFilesDescription:"Keine Dateien entsprechen Ihren aktuellen Such- oder Filterkriterien.",clearFilters:"Filter zurücksetzen",printedCount:"{{count}}x gedruckt",uploadedBy:"Hochgeladen von",deleteFolder:"Ordner löschen",deleteFile:"Datei löschen",deleteFilesCount:"{{count}} Dateien löschen",deleteFolderConfirm:"Möchten Sie diesen Ordner wirklich löschen? Alle Dateien darin werden ebenfalls gelöscht.",deleteFileConfirm:"Möchten Sie diese Datei wirklich löschen?",deleteFilesConfirm:"Möchten Sie {{count}} ausgewählte Dateien wirklich löschen? Diese Aktion kann nicht rückgängig gemacht werden.",deleting:"Wird gelöscht...",noPermissionRenameFolder:"Sie haben keine Berechtigung, Ordner umzubenennen",noPermissionLinkFolder:"Sie haben keine Berechtigung, Ordner zu verknüpfen",noPermissionDeleteFolder:"Sie haben keine Berechtigung, Ordner zu löschen",noPermissionPrint:"Sie haben keine Berechtigung zum Drucken",noPermissionSlice:"Sie haben keine Berechtigung, Dateien zu slicen",noPermissionAddToQueue:"Sie haben keine Berechtigung, zur Warteschlange hinzuzufügen",noPermissionDownload:"Sie haben keine Berechtigung, Dateien herunterzuladen",noPermissionRenameFile:"Sie haben keine Berechtigung, diese Datei umzubenennen",noPermissionGenerateThumbnail:"Sie haben keine Berechtigung, Vorschaubilder zu generieren",noPermissionDeleteFile:"Sie haben keine Berechtigung, diese Datei zu löschen",noPermissionCreateFolder:"Sie haben keine Berechtigung, Ordner zu erstellen",noPermissionUpload:"Sie haben keine Berechtigung, Dateien hochzuladen",noPermissionMoveFiles:"Sie haben keine Berechtigung, Dateien zu verschieben",noPermissionDeleteFiles:"Sie haben keine Berechtigung, Dateien zu löschen",linkExternal:"Extern verknüpfen",linkExternalFolder:"Externen Ordner verknüpfen",linkExternalFolderDescription:"Ein Host-Verzeichnis (NAS, USB, Netzlaufwerk) in den Dateimanager einbinden. Dateien werden nicht kopiert — sie werden direkt vom Originalpfad gelesen.",externalFolderNamePlaceholder:"z.B. NAS-Drucke",externalPath:"Host-Pfad",externalPathHelp:"Absoluter Pfad zum Verzeichnis auf dem Docker-Host. Muss als Bind-Mount in den Container eingebunden sein.",readOnly:"Nur Lesen",readOnlyHelp:"verhindert Uploads und Löschungen",showHiddenFiles:"Versteckte Dateien anzeigen (Punkt-Dateien)",externalFolder:"Externer Ordner",scanFolder:"Scannen",toast:{folderCreated:"Ordner erstellt",folderDeleted:"Ordner gelöscht",fileDeleted:"Datei gelöscht",filesDeleted:"{{count}} Dateien gelöscht",filesMoved:"Dateien verschoben",folderLinked:"Ordner verknüpft",folderUnlinked:"Ordnerverknüpfung aufgehoben",externalFolderLinked:"Externer Ordner verknüpft und gescannt",folderScanned:"Scan abgeschlossen: {{added}} hinzugefügt, {{removed}} entfernt",addedToQueue:"{{count}} Datei(en) zur Warteschlange hinzugefügt",addedToQueuePartial:"{{added}} Datei(en) hinzugefügt, {{failed}} fehlgeschlagen",failedToAddToQueue:"Fehler beim Hinzufügen: {{error}}",fileRenamed:"Datei umbenannt",folderRenamed:"Ordner umbenannt",thumbnailsGenerated:"{{count}} Vorschaubild(er) generiert",thumbnailsGeneratedPartial:"{{succeeded}} Vorschaubild(er) generiert, {{failed}} fehlgeschlagen",noStlMissingThumbnails:"Keine STL-Dateien ohne Vorschaubild",failedToGenerateThumbnails:"Fehler beim Generieren der Vorschaubilder: {{error}}",thumbnailGenerated:"Vorschaubild generiert",failedToGenerateThumbnail:"Fehler beim Generieren des Vorschaubildes: {{error}}"}},projects:{title:"Projekte",subtitle:"Organisieren und verfolgen Sie Ihre 3D-Druckprojekte",newProject:"Neues Projekt",editProject:"Projekt bearbeiten",deleteProject:"Projekt löschen",projectName:"Projektname",description:"Beschreibung",noProjects:"Noch keine Projekte",noProjectsFiltered:"Keine {{status}} Projekte",noProjectsFilteredHelp:"Sie haben keine {{status}} Projekte. Projekte werden hier angezeigt, wenn sich ihr Status ändert.",createFirst:"Erstellen Sie Ihr erstes Projekt, um verwandte Drucke zu organisieren, den Fortschritt zu verfolgen und Ihre Builds zu verwalten.",createFirstButton:"Erstes Projekt erstellen",create:"Erstellen",files:"Dateien",prints:"Drucke",plates:"Platten",parts:"Teile",lastModified:"Zuletzt geändert",deleteConfirm:"Möchten Sie dieses Projekt wirklich löschen? Archive und Warteschlangenelemente werden getrennt, aber nicht gelöscht.",addFiles:"Dateien hinzufügen",removeFile:"Datei entfernen",viewDetails:"Details anzeigen",namePlaceholder:"z.B. Voron 2.4 Build",descriptionPlaceholder:"Optionale Beschreibung...",urlLabel:"URL",urlPlaceholder:"https://makerworld.com/...",urlInvalid:"URL muss mit http:// oder https:// beginnen",openExternalUrl:"Projekt-URL öffnen",coverImageLabel:"Titelbild",coverImageAlt:"Projekt-Titelbild",coverImageUpload:"Hochladen",coverImageReplace:"Ersetzen",coverImageRemove:"Entfernen",color:"Farbe",targetPlates:"Ziel-Platten",targetPlatesPlaceholder:"z.B. 25",targetPlatesHelp:"Anzahl der Druckaufträge",targetParts:"Ziel-Teile",targetPartsPlaceholder:"z.B. 150",targetPartsHelp:"Benötigte Objekte insgesamt",tagsLabel:"Tags (kommagetrennt)",tagsPlaceholder:"z.B. voron, funktional, geschenk",dueDate:"Fälligkeitsdatum",priority:"Priorität",priorityLow:"Niedrig",priorityNormal:"Normal",priorityHigh:"Hoch",priorityUrgent:"Dringend",statusActive:"Aktiv",statusCompleted:"Abgeschlossen",statusArchived:"Archiviert",done:"Fertig",completed:"abgeschlossen",failed:"fehlgeschlagen",inQueue:"in Warteschlange",noPrintsYet:"Noch keine Drucke",printJobs:"Druckaufträge (Platten)",partsPrinted:"Gedruckte Teile",failedParts:"Fehlgeschlagene Teile",import:"Importieren",export:"Exportieren",importProject:"Projekt importieren",exportAll:"Alle Projekte exportieren",loading:"Projekte werden geladen...",noEditPermission:"Sie haben keine Berechtigung, Projekte zu bearbeiten",noDeletePermission:"Sie haben keine Berechtigung, Projekte zu löschen",noCreatePermission:"Sie haben keine Berechtigung, Projekte zu erstellen",noImportPermission:"Sie haben keine Berechtigung, Projekte zu importieren",noExportPermission:"Sie haben keine Berechtigung, Projekte zu exportieren",toast:{created:"Projekt erstellt",updated:"Projekt aktualisiert",deleted:"Projekt gelöscht",imported:"Projekt importiert",multipleImported:"{{count}} Projekte importiert",importFailed:"Import fehlgeschlagen",exported:"Projekte exportiert (nur Metadaten)"}},projectDetail:{notFound:"Projekt nicht gefunden",backToProjects:"Zurück zu Projekten",export:"Exportieren",exportProject:"Projekt exportieren",noExportPermission:"Sie haben keine Berechtigung, Projekte zu exportieren",noEditPermission:"Sie haben keine Berechtigung, Projekte zu bearbeiten",partOf:"Teil von:",priorityLabel:"Priorität:",noPrints:"Noch keine Drucke in diesem Projekt",status:{active:"Aktiv",completed:"Abgeschlossen",archived:"Archiviert"},priority:{low:"Niedrig",normal:"Normal",high:"Hoch",urgent:"Dringend"},dueDate:{overdue:"Überfällig",today:"Heute fällig",daysLeft:"{{count}} Tage übrig"},progress:{platesProgress:"Platten-Fortschritt",partsProgress:"Teile-Fortschritt",printJobs:"Druckaufträge",parts:"Teile",percentComplete:"{{percent}}% abgeschlossen",remaining:"{{count}} verbleibend"},stats:{printJobs:"Druckaufträge",total:"gesamt",failed:"{{count}} fehlgeschlagen",partsPrinted:"{{count}} Teile gedruckt",printTime:"Druckzeit",filamentUsed:"Filament verbraucht"},cost:{title:"Kostenverfolgung",filamentCost:"Filamentkosten",energy:"Energie",totalCost:"Gesamtkosten",total:"Gesamt",includesBom:"inkl. Stückliste",budget:"Budget",remaining:"Verbleibend"},subProjects:{title:"Unterprojekte ({{count}})"},notes:{title:"Notizen",noEditPermission:"Sie haben keine Berechtigung, Notizen zu bearbeiten",placeholder:"Notizen zu diesem Projekt hinzufügen...",empty:"Noch keine Notizen. Klicken Sie auf Bearbeiten, um Notizen hinzuzufügen."},files:{title:"Dateien",linkFolders:"Ordner aus dem Dateimanager verknüpfen",forQuickAccess:"für schnellen Zugriff auf dieses Projekt.",fileCount:"{{count}} Datei(en)",empty:"Keine Ordner verknüpft. Gehen Sie zum Dateimanager und verknüpfen Sie einen Ordner mit diesem Projekt.",noFiles:"Keine Dateien in diesem Ordner.",print:"Jetzt drucken",addToQueue:"Zur Warteschlange"},bom:{title:"Stückliste",acquired:"{{completed}}/{{total}} beschafft",showAll:"Alle anzeigen",hideDone:"Erledigte ausblenden",addPart:"Teil hinzufügen",noAddPermission:"Sie haben keine Berechtigung, Teile hinzuzufügen",partNamePlaceholder:"Teilename (z.B. M3x8 Schrauben)",partName:"Teilename",qty:"Menge",price:"Preis ({{currency}})",sourcingUrlPlaceholder:"Bezugsquelle-URL (optional)",remarksPlaceholder:"Bemerkungen (optional)",deletePart:"Teil löschen",deleteConfirm:'Möchten Sie "{{name}}" wirklich löschen?',noUpdatePermission:"Sie haben keine Berechtigung, Teile zu aktualisieren",noEditPermission:"Sie haben keine Berechtigung, Teile zu bearbeiten",noDeletePermission:"Sie haben keine Berechtigung, Teile zu löschen",totalCost:"Gesamtkosten:",empty:"Keine Teile in der Stückliste. Fügen Sie Hardware, Elektronik oder andere Komponenten hinzu, um zu verfolgen, was beschafft werden muss."},timeline:{title:"Aktivitätsverlauf",empty:"Noch keine Aktivität."},template:{saveAsTemplate:"Als Vorlage speichern",noCreatePermission:"Sie haben keine Berechtigung, Vorlagen zu erstellen"},queue:{title:"Warteschlange",viewAll:"Alle anzeigen",printing:"{{count}} druckend",queued:"{{count}} in Warteschlange"},prints:{title:"Drucke ({{count}})"},toast:{projectUpdated:"Projekt aktualisiert",partAdded:"Teil hinzugefügt",partRemoved:"Teil entfernt",exportFailed:"Export fehlgeschlagen",projectExported:"Projekt exportiert",templateCreated:"Vorlage erstellt"}},system:{title:"Systeminformationen",version:"Version",uptime:"Laufzeit",cpuUsage:"CPU-Auslastung",memoryUsage:"Speicherauslastung",diskUsage:"Festplattenauslastung",networkInfo:"Netzwerkinformationen",logs:"Protokolle",debugMode:"Debug-Modus",enableDebug:"Debug-Protokollierung aktivieren",disableDebug:"Debug-Protokollierung deaktivieren",downloadLogs:"Protokolle herunterladen",clearLogs:"Protokolle löschen",dockerInfo:"Docker-Info",containerName:"Container-Name",imageName:"Image-Name",platform:"Plattform",architecture:"Architektur"},library:{title:"Filament-Bibliothek",addFilament:"Filament hinzufügen",editFilament:"Filament bearbeiten",deleteFilament:"Filament löschen",vendor:"Hersteller",material:"Material",color:"Farbe",kFactor:"K-Faktor",temperature:"Temperatur",noFilaments:"Keine Filamente in der Bibliothek",deleteConfirm:"Möchten Sie dieses Filament wirklich löschen?",importFromPrinter:"Vom Drucker importieren",exportToFile:"In Datei exportieren"},slice:{title:"Modell slicen",action:"Slicen",actionAll:"Alle {{count}} Plates slicen",actionAllTitle:"Alle Plates in eine einzelne Multi-Plate-Ausgabe slicen (ein Archiv). Die Filamentauswahl gilt für jeden Slot des Projekts.",allPlatesToggle:"Alle {{count}} Plates slicen",slicing:"Slicen…",printer:"Drucker-Profil",process:"Prozess-Profil",filament:"Filament-Profil",filamentSlot:"Filament {{index}} – {{type}}",selectPreset:"— Profil auswählen —",loadingPresets:"Profile werden geladen…",analyzingPlateFilaments:"Plattenfilamente werden analysiert…",analyzingPlateFilamentsHint:"Es wird ein Probeschnitt ausgeführt, um die belegten AMS-Slots dieser Platte zu ermitteln. Wird zwischengespeichert — erneutes Öffnen ist sofort.",previewToast:"{{name}} wird analysiert — {{elapsed}}",previewWithProgress:"{{name}} wird analysiert — {{stage}} ({{percent}}%) — {{elapsed}}",notUsedByPlate:"— wird von dieser Platte nicht verwendet",noPresetsForSlot:"Keine Profile verfügbar",otherPrinters:"Andere Drucker",presetsLoadFailed:"Profile konnten nicht geladen werden. Importiere sie zuerst unter Einstellungen → Profile.",refreshPresets:"Aktualisieren",refreshPresetsTitle:"Profile neu laden — die aktuellen Cloud- und Bundle-Listen abrufen (nach dem Löschen eines Profils in Bambu Studio oder Bambu Handy verwenden)",allPresetsRequired:"Alle Profile müssen ausgewählt sein",bundle:"Slicer-Bundle",bundleNone:"— Keines (Profile einzeln auswählen) —",bundleAllRequired:"Bundle-Prozess und jeder Filament-Slot müssen ausgewählt sein",enqueuing:"Slice-Auftrag wird übermittelt…",queued:"In Warteschlange…",failed:"Slicen fehlgeschlagen. Logs des Slicer-Sidecars prüfen.",startedToast:"{{name}} wird im Hintergrund gesliced…",queuedToast:"Warteschlange: {{name}} — {{elapsed}}",runningToast:"{{name}} wird gesliced — {{elapsed}}",runningWithProgress:"{{name}} – {{stage}} ({{percent}} %) – {{elapsed}}",runningWithProgressMultiPlate:"Plate {{plateIndex}} von {{plateCount}} • {{name}} – {{stage}} ({{percent}} %) – {{elapsed}}",completedToast:"{{name}} wurde gesliced",failedTitle:"Slicen fehlgeschlagen",failedToast:"Slicen von {{name}} fehlgeschlagen: {{detail}}",tier:{local:"Importiert",cloud:"Bambu Cloud",orcaCloud:"Orca Cloud",standard:"Standard"},cloud:{notAuthenticated:"In Bambu Cloud anmelden (Einstellungen → Profile → Bambu Cloud), um deine Cloud-Profile zu sehen.",expired:"Bambu-Cloud-Sitzung abgelaufen — erneut anmelden, um die Cloud-Profile zu aktualisieren.",unreachable:"Bambu Cloud ist gerade nicht erreichbar. Lokale und Standard-Profile funktionieren weiterhin."},orcaCloud:{notAuthenticated:"Bei Orca Cloud anmelden (Profile → Orca Cloud), um Ihre Orca-Profile zu sehen.",expired:"Orca Cloud-Sitzung abgelaufen — erneut anmelden, um die Orca-Profile zu aktualisieren.",unreachable:"Orca Cloud ist derzeit nicht erreichbar. Andere Profile funktionieren weiterhin."},bedType:{label:"Druckbett",auto:"Auto (aus Prozess-Profil)",coolPlate:"Cool Plate",coolPlateSuperTack:"Cool Plate SuperTack",engineering:"Engineering Plate",highTemp:"High Temp Plate",texturedPEI:"Textured PEI Plate",smoothPEI:"Smooth PEI Plate"}},spoolman:{title:"Spoolman-Integration",enabled:"Spoolman aktiviert",url:"Spoolman URL",connected:"Verbunden",disconnected:"Nicht verbunden",testConnection:"Verbindung testen",sync:"Synchronisieren",syncing:"Synchronisiert...",lastSync:"Letzte Synchronisierung",linkToSpoolman:"Mit Spoolman verknüpfen",openInSpoolman:"In Spoolman öffnen",unlinkSpool:"Spule trennen",unlinkConfirmTitle:"Spule entfernen?",unlinkConfirmMessage:"Die Spule wird vom Slot entfernt. Die Spulendaten selbst bleiben unverändert.",selectSpool:"Spule auswählen",noUnlinkedSpools:"Keine nicht zugewiesenen Spulen verfügbar",linkSuccess:"Spule erfolgreich zugewiesen",linkFailed:"Spule konnte nicht zugewiesen werden",unlinkSuccess:"Spule erfolgreich entfernt",unlinkFailed:"Spule konnte nicht entfernt werden",linkedSpool:"Zugewiesene Spule",spoolId:"Spulen-ID",fillSourceLabel:"(Spoolman)",weight:"Gewicht",remaining:"Verbleibend",disableWeightSync:"AMS-Gewichtsschätzung deaktivieren",disableWeightSyncDesc:"Verbleibende Kapazität nicht aus AMS-Schätzungen aktualisieren. Verwenden Sie dies, wenn Sie die Verbrauchserfassung von Spoolman gegenüber den prozentualen AMS-Schätzungen bevorzugen. Neue Spulen verwenden weiterhin die AMS-Schätzung als Anfangsgewicht.",reportPartialUsage:"Teilverbrauch bei fehlgeschlagenen Drucken melden",reportPartialUsageDesc:"Wenn ein Druck fehlschlägt oder abgebrochen wird, den geschätzten Filamentverbrauch bis zu diesem Zeitpunkt basierend auf dem Schichtfortschritt melden."},inventory:{title:"Spulen-Inventar",subtitle:"Verwalten Sie Ihre Spulen",spoolmanMixedContentTitle:"Spoolman lässt sich nicht über HTTPS laden — Browser blockiert gemischte Inhalte",spoolmanMixedContentBody:"Bambuddy wird über HTTPS ausgeliefert (über deinen Reverse-Proxy), aber deine Spoolman-URL ist nach wie vor HTTP. Browser blockieren gemischte Inhalte aus Sicherheitsgründen, daher kann die eingebettete Spoolman-Oberfläche nicht geladen werden. Spoolman muss ebenfalls über HTTPS erreichbar sein.",spoolmanMixedContentFixReverseProxy:"Stelle Spoolman hinter denselben Reverse-Proxy wie Bambuddy (Traefik / Nginx / Caddy) mit HTTPS und aktualisiere die Spoolman-URL in den Einstellungen auf die neue HTTPS-Adresse.",spoolmanMixedContentFixOpenNewTab:"Als Workaround kannst du Spoolman in einem neuen Tab über HTTP öffnen — gemischte Inhalte werden nur innerhalb eingebetteter Frames blockiert, ein eigener Tab funktioniert weiterhin.",spoolmanOpenInNewTab:"Spoolman in neuem Tab öffnen",labels:{title:"Spulen-Etiketten drucken",selectedCount:"{{count}} ausgewählt",pickSpools:"Wählen Sie, für welche Spulen Etiketten gedruckt werden sollen:",searchPlaceholder:"Name, Marke oder #ID suchen",filterByMaterial:"Material:",allMaterials:"Alle",selectVisible:"Alle sichtbaren auswählen ({{count}})",deselectVisible:"Sichtbare abwählen",clearAll:"Alle entfernen",noSpoolsToShow:"Keine Spulen anzuzeigen. Filter anpassen und erneut versuchen.",noMatches:"Keine Spulen entsprechen der aktuellen Suche oder dem Filter.",printOne:"Etikett für diese Spule drucken",printLabels:"Etiketten drucken…",bulkTitle:"Spulen aus den aktuell angezeigten {{count}} zum Etikettieren auswählen",noSpoolsTitle:"Keine Spulen zum Etikettieren",error:"Etiketten konnten nicht erstellt werden: {{msg}}",sortBy:{label:"Sortieren:",id:"Nach ID",color:"Nach Farbe"},templates:{amsHolderSmall:{label:"AMS-Halter — klein (74 × 33 mm)",hint:"Ein Etikett pro Seite; passt zum druckbaren Etikett aus dem MakerWorld-Modell 752566 (AMS-Filament-Etikettenhalter)."},amsHolderLarge:{label:"AMS-Halter — groß (75 × 55 mm)",hint:"Ein Etikett pro Seite; passt zur Kartoneinleger-Variante des AMS-Filament-Etikettenhalters. Genug Platz für Farbprobe, Marke, Material, ID und QR-Code."},box40x30:{label:"Boxetikett (40 × 30 mm)",hint:"Ein Etikett pro Seite; gängige DK/Brother-Rollengröße, ideal für Filament-Beutel und Lager-Etiketten."},box:{label:"Box label (62 × 29 mm)",hint:"Ein Etikett pro Seite; für Brother PT/QL und Dymo-Kleinetiketten dimensioniert."},averyL7160:{label:"Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)",hint:"EU-Bogenformat; 21 Etiketten pro A4-Seite."},avery5160:{label:"Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)",hint:"US-Bogenformat; 30 Etiketten pro Letter-Seite."}}},addSpool:"Spule hinzufügen",copySpool:"Spule kopieren",editSpool:"Spule bearbeiten",material:"Material",selectMaterial:"Material auswählen...",subtype:"Untertyp",brand:"Marke",searchBrand:"Marke suchen...",useCustomBrand:'"{{brand}}" verwenden',useCustomMaterial:"Benutzerdefiniertes Material verwenden: {{material}}",colorName:"Farbname",colorNamePlaceholder:"Jadeweiß, Feuerrot...",color:"Farbe",hexColor:"Hex-Farbe",pickColor:"Benutzerdefinierte Farbe wählen",labelWeight:"Nenngewicht",coreWeight:"Leergewicht der Spule",searchSpoolWeight:"Spulengewicht suchen...",weightUsed:"Verbraucht",currentWeight:"Restgewicht",measuredWeight:"Gemessenes Gewicht",spoolName:"Spule",costPerKg:"Kosten pro kg",storageLocation:"Lagerstandort",storageLocationPlaceholder:"z.B. Regal A, Schublade 1",openInInventory:"Im Inventar öffnen",measuredWeightError:"Das gemessene Gewicht muss zwischen {{min}}g und {{max}}g liegen.",slicerFilament:"Slicer-Filament",slicerFilamentName:"Slicer-Preset-Name",slicerPreset:"Slicer-Preset",searchPresets:"Filament-Presets suchen...",selectedPreset:"Ausgewählt",noPresetsFound:"Keine Presets gefunden",tempOverrides:"Temperatur-Überschreibungen",note:"Notiz",notePlaceholder:"Zusätzliche Notizen zu dieser Spule...",category:"Kategorie",categoryPlaceholder:"z. B. Produktion, Prototyp, Kunde A",categoryNone:"Ohne Kategorie",storageLocationNone:"Kein Lagerort",lowStockThresholdOverride:"Niedrigbestandsschwelle (diese Spule)",lowStockThresholdOverrideHelp:"Leer lassen, um den globalen Schwellenwert ({{global}}%) zu verwenden.",clearRfid:"RFID-Tag löschen",rfidCleared:"RFID-Tag gelöscht",archive:"Archivieren",restore:"Wiederherstellen",noSpools:"Noch keine Spulen. Fügen Sie Ihre erste Spule hinzu.",noAvailableSpools:"Keine Spulen verfügbar. Fügen Sie eine Spule zum Inventar hinzu oder lösen Sie eine aus einem anderen Slot.",kProfiles:"K-Profile",addKProfile:"K-Profil hinzufügen",assignSpool:"Spule zuweisen",unassignSpool:"Zuweisung aufheben",assignSuccess:"Spule zugewiesen und AMS-Slot konfiguriert",assignFailed:"Spulenzuweisung fehlgeschlagen",selectSpool:"Wählen Sie eine Spule für diesen Slot",assigned:"Zugewiesen",assigning:"Wird zugewiesen...",searchSpools:"Spulen suchen...",showAllSpools:"Alle Spulen anzeigen",spoolmanSpools:"Spoolman-Spulen",allMaterials:"Alle Materialien",filterByBrand:"Nach Marke filtern...",showArchived:"Archivierte anzeigen",quickAdd:"Schnellerfassung (Lager)",quantity:"Menge",stock:"Lager",configured:"Konfiguriert",spoolsCreated:"{{count}} Spulen erstellt",spoolsPartiallyCreated:"{{created}} von {{total}} Spulen erstellt (einige fehlgeschlagen)",spoolCreated:"Spule erstellt",spoolUpdated:"Spule aktualisiert",spoolDeleted:"Spule gelöscht",deepLinkSpoolNotFound:"Spule nicht gefunden",deepLinkFetchFailed:"Spule konnte nicht geladen werden — bitte erneut versuchen",spoolArchived:"Spule archiviert",spoolRestored:"Spule wiederhergestellt",kProfileSaveFailed:"K-Profil-Einstellungen konnten nicht gespeichert werden",syncWeightSpoolNotFound:"Spule nicht gefunden — sie wurde möglicherweise gelöscht",syncWeightSpoolmanUnreachable:"Spoolman ist nicht erreichbar — bitte später erneut versuchen",syncWeightFailed:"Gewicht konnte nicht synchronisiert werden",spoolmanUnreachable:"Spoolman ist nicht erreichbar — bitte später erneut versuchen",deleteSpoolNotFound:"Spule nicht gefunden — sie wurde möglicherweise bereits gelöscht",deleteFailed:"Spule konnte nicht gelöscht werden",archiveSpoolNotFound:"Spule nicht gefunden — sie wurde möglicherweise bereits gelöscht",archiveFailed:"Spule konnte nicht archiviert werden",restoreSpoolNotFound:"Spule nicht gefunden — sie wurde möglicherweise bereits gelöscht",restoreFailed:"Spule konnte nicht wiederhergestellt werden",saveFailed:"Änderungen konnten nicht gespeichert werden",tagClearFailed:"Tag konnte nicht gelöscht werden",deleteConfirm:"Möchten Sie diese Spule wirklich löschen? Dies kann nicht rückgängig gemacht werden.",archiveConfirm:"Möchten Sie diese Spule wirklich archivieren?",advancedSettings:"Erweiterte Einstellungen",filamentInfoTab:"Filament-Info",paProfileTab:"PA-Profil",filamentInfo:"Filament",additional:"Zusätzlich",loadingPresets:"Cloud-Presets werden geladen...",cloudConnected:"Cloud verbunden",cloudNotConnected:"Cloud nicht verbunden (Standardwerte)",recentColors:"Zuletzt",searchColors:"Farben suchen...",searchResults:"Suchergebnisse",allColors:"Alle Farben",commonColors:"Häufige Farben",showLess:"Weniger",showAll:"Alle",noColorsFound:"Keine Farben gefunden",noResults:"Keine Ergebnisse",extraColorsLabel:"Zusätzliche Farben",extraColorsPlaceholder:"EC984C,#6CD4BC,A66EB9,D87694",extraColorsHint:"2 bis 8 Hex-Stops, durch Kommas getrennt. Wird als Verlauf dargestellt.",extraColorsInvalid:"Ungültige Hex-Werte ignoriert: {{tokens}}",colorEffectLabel:"Effekt",colorEffect:{none:"Keiner",sparkle:"Glitzer",wood:"Holz",marble:"Marmor",glow:"Leuchtend",matte:"Matt",silk:"Seide",galaxy:"Galaxie",rainbow:"Regenbogen",metal:"Metallic",translucent:"Lichtdurchlässig",gradient:"Verlauf",dualColor:"Zweifarbig",triColor:"Dreifarbig",multicolor:"Mehrfarbig"},selectMaterialFirst:"Bitte zuerst ein Material im Filament-Info Tab auswählen.",noPrintersConfigured:"Keine Drucker konfiguriert. Fügen Sie Drucker hinzu.",matchingFilter:"Filter",anyBrand:"Jede Marke",anyVariant:"Jede Variante",autoSelect:"Auto-Auswahl",matches:"Treffer",match:"Treffer",noMatches:"Keine Treffer",connected:"Verbunden",offline:"Offline",printerOffline:"Drucker ist offline. Verbinden Sie ihn, um Kalibrierungsprofile anzuzeigen.",noKProfilesMatch:"Keine K-Profile stimmen mit dem gewählten Filament überein.",leftNozzle:"Linke Düse",rightNozzle:"Rechte Düse",profilesSelected:"Kalibrierungsprofil(e) ausgewählt",totalInventory:"Gesamtbestand",totalConsumed:"Gesamtverbrauch",byMaterial:"Nach Material",inPrinter:"Im Drucker",lowStock:"Niedriger Bestand",sinceTracking:"Seit Beginn der Erfassung",resetConsumedCounter:"Zähler zurücksetzen",resetConsumedCounterTooltip:"Den verbrauchten Gramm-Zähler dieser Spule auf null setzen. Das Restgewicht bleibt unverändert.",resetConsumedCounterConfirm:"Verbrauchten Gramm-Zähler dieser Spule auf 0 zurücksetzen? Künftige Drucke zählen wieder ab null. Die Spule selbst, ihre Restgewichtsberechnung und Ihre Einstellungen bleiben unverändert.",resetAllConsumedCounters:"Alle Zähler zurücksetzen",resetAllConsumedCountersTooltip:"Den verbrauchten Gramm-Zähler auf jeder Spule auf null setzen. Die Restgewichte bleiben unverändert.",resetAllConsumedCountersConfirm:"Verbrauchten Gramm-Zähler auf allen {{count}} Spulen (archivierte eingeschlossen) auf 0 zurücksetzen? Das löscht den Wert „Insgesamt verbraucht“, sodass künftige Drucke wieder ab null gezählt werden. Spulen und Restgewichte bleiben unverändert.",consumedCounterReset:"Zähler zurückgesetzt",allConsumedCountersReset:"Zähler für {{count}} Spule(n) zurückgesetzt",resetConsumedCounterFailed:"Zähler konnte nicht zurückgesetzt werden",loadedInAms:"Im AMS/Ext geladen",remaining:"Verbleibend",weightCheck:"Gewichtskontrolle",lastWeighed:"Zuletzt gewogen",neverWeighed:"Nie gewogen",search:"Spulen suchen...",showing:"Zeige",to:"bis",of:"von",show:"Zeige",spools:"Spulen",spool:"Spule",page:"Seite",noSpoolsMatch:"Keine Ergebnisse",noSpoolsMatchDesc:"Versuchen Sie, Ihre Suche oder Filter anzupassen.",active:"Aktiv",archived:"Archiviert",all:"Alle",used:"Verwendet",new:"Neu",clearFilters:"Filter löschen",table:"Tabelle",cards:"Karten",net:"Netto",groupSimilar:"Gruppieren",groupedSpools:"{{count}} identische Spulen",groupedRows:"Zeilen",columns:"Spalten",configureColumns:"Spalten konfigurieren",configureColumnsDesc:"Ziehen zum Neuordnen oder Pfeile verwenden. Sichtbarkeit mit dem Augensymbol umschalten.",visible:"sichtbar",reset:"Zurücksetzen",cancel:"Abbrechen",applyChanges:"Änderungen anwenden",moveUp:"Nach oben",moveDown:"Nach unten",hideColumn:"Spalte ausblenden",showColumn:"Spalte einblenden",linkToSpool:"Mit Spule verknüpfen",tagLinked:"Tag mit Spule verknüpft",tagLinkFailed:"Tag-Verknüpfung fehlgeschlagen",tagAlreadyLinked:"Tag bereits mit anderer Spule verknüpft",unknownTag:"Unbekannter RFID-Tag erkannt",usageHistory:"Verbrauchshistorie",noUsageHistory:"Noch kein Verbrauch erfasst",printName:"Druckname",weightConsumed:"Verbrauchtes Gewicht",clearHistory:"Löschen",historyCleared:"Verbrauchshistorie gelöscht",fillSourceLabel:"(Inv)",lowStockThresholdError:"Der Schwellenwert muss zwischen 0.1 und 99.9 liegen",assignMismatchTitle:"Material stimmt nicht überein",assignMismatchMessage:'Das ausgewählte Spulenmaterial "{{spoolMaterial}}" stimmt nicht mit dem Tray-Material "{{trayMaterial}}" für {{location}} überein. Trotzdem zuweisen?',assignMismatchConfirm:"Trotzdem zuweisen",assignPartialMismatchMessage:'Das Spulenmaterial "{{spoolMaterial}}" ist ähnlich, stimmt aber nicht genau mit "{{trayMaterial}}" in {{location}} überein. Möchten Sie fortfahren?',assignProfileMismatchMessage:'Das Spulenprofil "{{spoolProfile}}" stimmt nicht mit dem Fachprofil "{{trayProfile}}" in {{location}} überein. Möchten Sie fortfahren?',assignReconfigureNote:"Der AMS-Slot wird mit dem Profil der Spule neu konfiguriert.",spoolmanFilamentCatalog:"Spoolman-Filamentkatalog",pickFromSpoolmanCatalog:"Aus Spoolman-Katalog wählen…",spoolmanFilamentSelected:"Filament aus Spoolman-Katalog ausgewählt",spoolmanFilamentUnlinked:"Verknüpfung mit Filamentkatalog aufgehoben",noSpoolmanFilaments:"Keine Filamente im Spoolman-Katalog gefunden",spoolmanFilamentColorSwatch:"Filamentfarbe",spoolWeightManagedBySpoolman:"Das Leerspulengewicht wird pro Filamenttyp in Spoolman verwaltet",spoolmanCatalogLoadFailed:"Spoolman-Filamentkatalog konnte nicht geladen werden"},timelapse:{title:"Zeitraffer",create:"Zeitraffer erstellen",download:"Herunterladen",delete:"Löschen",preview:"Vorschau",frameRate:"Bildrate",quality:"Qualität",processing:"Wird verarbeitet...",noTimelapses:"Keine Zeitraffer verfügbar"},ams:{title:"AMS",slot:"Slot",empty:"Leer",emptySlot:"Leerer Slot",slotEmpty:"Leer",emptySlotReset:"Keine Spule zugewiesen",unknown:"Unbekannt",humidity:"Luftfeuchtigkeit",temperature:"Temperatur",filamentType:"Filamenttyp",filamentColor:"Farbe",remaining:"Verbleibend",history:"AMS-Verlauf",noHistory:"Kein Verlauf verfügbar",configureSlot:"Slot konfigurieren",externalSpool:"Externe Spule",profile:"Profil",kFactor:"K-Faktor",fill:"Füllstand",configure:"Konfigurieren",used:"verwendet",remainingUnit:"verbleibend"},printModal:{title:"Druck starten",selectPrinter:"Drucker auswählen",selectPlate:"Platte auswählen",filamentMapping:"Filamentzuordnung",totalCost:"Gesamtkosten:",slotRemainingShort:" - {{grams}}g übrig",printSettings:"Druckeinstellungen",bedLeveling:"Bett-Nivellierung",flowCalibration:"Fluss-Kalibrierung",vibrationCalibration:"Vibrations-Kalibrierung",layerInspection:"Erste-Schicht-Prüfung",timelapse:"Zeitraffer",startPrint:"Druck starten",addToQueue:"Zur Warteschlange hinzufügen",cancel:"Abbrechen",noPrintersAvailable:"Keine Drucker verfügbar",printerBusy:"Drucker ist beschäftigt",printerOffline:"Drucker ist offline",sameTypeDifferentColor:"Gleicher Typ, andere Farbe",filamentTypeNotLoaded:"Filamenttyp nicht geladen",openCalendar:"Kalender öffnen",leftNozzle:"L",rightNozzle:"R",leftNozzleTooltip:"Linke Düse",rightNozzleTooltip:"Rechte Düse",filamentOverride:"Filament-Überschreibung",filamentOverrideHint:"Filamente für modellbasierte Zuweisung optional überschreiben. Der Planer wird gegen die ausgewählten Filamente statt der ursprünglichen 3MF-Werte abgleichen.",originalFilament:"Original",overrideWith:"Ersetzen mit",resetToOriginal:"Auf Original zurücksetzen",insufficientFilamentTitle:"Nicht genug Filament",insufficientFilamentMessage:"Einige zugewiesene Spulen haben weniger Filament als dieser Druck benötigt:",insufficientFilamentLine:"{{printer}} - {{slot}}: benötigt {{required}}g, verbleibend {{remaining}}g",printAnyway:"Trotzdem drucken",forceColorMatch:"Farbe erzwingen",staggerPrinterStarts:"Druckerstarts staffeln",staggerGroupSize:"Gruppengröße",staggerInterval:"Intervall (Min.)",staggerPreview:"{{printers}} Drucker → {{groups}} Gruppen à {{size}}, Start alle {{interval}} Min.",staggerLastGroup:"letzte Gruppe: {{count}}",staggerTotal:"insgesamt: {{minutes}} Min.",staggerToPrinters:"Gestaffelt an {{count}} Drucker senden",gcodeInjection:"Auto-Print G-code einfügen"},backup:{includesEncryptionKey:"Lokale Sicherungen enthalten die MFA-Schlüsseldatei (DATA_DIR/.mfa_encryption_key), damit ein Backup-ZIP selbstkonsistent ist. Behandle das ZIP als sensibel — wer Zugriff auf die Datei hat, kann die darin enthaltenen OIDC-Client-Secrets und TOTP-Geheimnisse entschlüsseln.",title:"Sichern & Wiederherstellen",createBackup:"Sicherung erstellen",restoreBackup:"Sicherung wiederherstellen",restoreDescription:"Alle Daten aus einer Sicherungsdatei ersetzen",downloadBackup:"Sicherung herunterladen",uploadBackup:"Sicherung hochladen",lastBackup:"Letzte Sicherung",autoBackup:"Automatische Sicherung",backupNow:"Jetzt sichern",restoreWarning:"Warnung: Das Wiederherstellen einer Sicherung überschreibt alle aktuellen Daten.",includeArchives:"Archive einschließen",includeSettings:"Einstellungen einschließen",includeProfiles:"Profile einschließen",backupSuccess:"Sicherung erfolgreich erstellt",restoreSuccess:"Sicherung erfolgreich wiederhergestellt",backupFailed:"Sicherung fehlgeschlagen",restoreFailed:"Wiederherstellung fehlgeschlagen",restoreNote:"Virtueller Drucker wird während der Wiederherstellung gestoppt",githubBackup:"Git-Backup",enabled:"Aktiviert",cloudLoginRequired:"Bambu Cloud Login erforderlich. Melden Sie sich unter Profile → Cloud-Profile an, um GitHub-Backup zu aktivieren.",cloudLoginRequiredShort:"Cloud-Login erforderlich",githubDescription:"Synchronisieren Sie Ihre Profile automatisch mit einem privaten GitHub-Repository für Backup und Versionsverlauf.",repoIsPrivate:"Repository ist privat — Sicherung möglich.",repoIsPublicWarning:"Das Repository ist ÖFFENTLICH. Bambuddy-Backups enthalten MQTT-Zugangsdaten, Home-Assistant-Tokens, Prometheus-Tokens, Ihre Bambu-Cloud-E-Mail-Adresse und über K-Profile auch Drucker-Zugangscodes. Speichern ist blockiert, bis Sie das Repository in den Einstellungen Ihres Anbieters auf privat stellen.",repoVisibilityUnknown:"Die Sichtbarkeit des Repositories konnte nicht bestimmt werden. Bambuddy sichert nur in Repositories, die nachweislich privat sind; Speichern wird blockiert.",repositoryUrl:"Repository-URL",repoUrlPlaceholderGitHub:"https://github.com/username/repo-name",repoUrlPlaceholderGitea:"https://gitea.example.com/username/repo-name",repoUrlPlaceholderForgejo:"https://forgejo.example.com/username/repo-name",repoUrlPlaceholderGitLab:"https://gitlab.com/username/repo-name",allowInsecureHttp:"Unsicheres HTTP erlauben",allowInsecureHttpHint:"Für selbst gehostete Instanzen in privaten Netzwerken ohne TLS aktivieren",personalAccessToken:"Persönlicher Zugriffstoken",tokenSaved:"(gespeichert)",enterNewToken:"Neuen Token eingeben zum Aktualisieren",tokenHint:"Feingranularer Token mit Lese-/Schreibberechtigung für Inhalte",branch:"Branch",provider:"Git-Anbieter",providerGitHub:"GitHub",providerGitLab:"GitLab",providerGitea:"Gitea",providerForgejo:"Forgejo",manualOnly:"Nur manuell",hourly:"Stündlich",daily:"Täglich",weekly:"Wöchentlich",includeInBackup:"In Sicherung einschließen",kProfiles:"K-Profile",kProfilesDescription:"Druckvorschub-Kalibrierung von verbundenen Druckern",noPrintersConnected:"Keine Drucker verbunden",printersConnected:"{{connected}}/{{total}} verbunden",cloudProfiles:"Cloud-Profile",cloudProfilesDescription:"Filament-, Drucker- und Prozessprofile aus der Bambu Cloud",appSettings:"App-Einstellungen",appSettingsDescription:"Bambuddy-Konfiguration (komplette Datenbank)",spoolInventory:"Spulenbestand",spoolInventoryDescription:"Filamentspulen, Nutzungsverlauf und Kostenverfolgung",printArchives:"Druckarchive",printArchivesDescription:"Druckverlauf-Metadaten (keine GCode/3MF-Dateien)",lastBackupAt:"Letzte Sicherung:",noBackupsYet:"Noch keine Sicherungen",next:"Nächste:",startingBackup:"Sicherung wird gestartet...",test:"Test",enableBackup:"Sicherung aktivieren",testConnection:"Verbindung testen",enterRepoUrl:"Repository-URL eingeben",enterRepoAndToken:"Repository-URL und Zugriffstoken eingeben",repoRequired:"Repository-URL ist erforderlich",tokenRequired:"Zugriffstoken ist erforderlich",githubBackupEnabled:"GitHub-Backup aktiviert",tokenUpdated:"Token aktualisiert",settingsSaved:"Einstellungen gespeichert",failedToSave:"Speichern fehlgeschlagen: {{message}}",backupCompleteFiles:"Sicherung abgeschlossen - {{count}} Dateien aktualisiert",backupSkippedNoChanges:"Sicherung übersprungen - keine Änderungen",backupFailed2:"Sicherung fehlgeschlagen: {{message}}",clearedLogs:"{{count}} Protokolle gelöscht",failedToClearLogs:"Protokolle löschen fehlgeschlagen: {{message}}",history:"Verlauf",clear:"Löschen",date:"Datum",status:"Status",commit:"Commit",localBackup:"Lokale Sicherung",localBackupDescription:"Erstellen Sie eine vollständige Sicherung Ihrer Bambuddy-Daten einschließlich Datenbank, Archive, Uploads und aller Dateien.",downloadBackupLabel:"Sicherung herunterladen",completeBackupZip:"Vollständige Sicherung: Datenbank + alle Dateien (ZIP)",download:"Herunterladen",preparingBackup:"Sicherung wird vorbereitet...",creatingArchive:"Sicherungsarchiv wird erstellt... Dies kann bei großen Archiven eine Weile dauern.",downloadingFile:"Sicherungsdatei wird heruntergeladen...",backupDownloaded:"Sicherung erfolgreich heruntergeladen",failedToCreateBackup:"Sicherung erstellen fehlgeschlagen: {{message}}",restore:"Wiederherstellen",restoreReplacesAll:"Wiederherstellung ersetzt alle Daten.",restoreReplacesAllDetail:"Ihre aktuelle Datenbank und Dateien werden vollständig ersetzt. Nach der Wiederherstellung ist ein Neustart erforderlich.",restoreConfirmTitle:"Sicherung wiederherstellen",restoreConfirmMessage:'Sind Sie sicher, dass Sie von "{{filename}}" wiederherstellen möchten? Dies ersetzt Ihre aktuelle Datenbank und alle Dateien vollständig. Die Anwendung muss nach der Wiederherstellung neu gestartet werden.',restoreConfirmButton:"Sicherung wiederherstellen",uploadingFile:"Sicherungsdatei wird hochgeladen...",backupRestoredRestart:"Sicherung wiederhergestellt. Bitte starten Sie Bambuddy neu.",failedToRestore:"Sicherung wiederherstellen fehlgeschlagen. Bitte überprüfen Sie das Dateiformat.",reloadNow:"Jetzt neu laden",creatingBackup:"Sicherung erstellen",restoringBackup:"Sicherung wiederherstellen",preparing:"Vorbereiten...",processing:"Verarbeiten...",doNotClosePage:"Bitte schließen Sie diese Seite nicht und navigieren Sie nicht weg. Dieser Vorgang kann bei großen Sicherungen mehrere Minuten dauern.",restoring:"Wiederherstellen...",restoreComplete:"Wiederherstellung abgeschlossen",restoreFailed2:"Wiederherstellung fehlgeschlagen",importSettings:"Einstellungen aus einer Sicherungsdatei importieren",pleaseWaitRestoring:"Bitte warten Sie, während Ihre Daten wiederhergestellt werden",selectBackupFile:"Klicken Sie, um eine Sicherungsdatei auszuwählen (.json oder .zip)",duplicateHandling:"So funktioniert die Duplikatbehandlung:",matchPrinters:"Drucker",matchPrintersBy:"abgeglichen nach Seriennummer",matchSmartPlugs:"Smart Plugs",matchSmartPlugsBy:"abgeglichen nach IP-Adresse",matchNotificationProviders:"Benachrichtigungsanbieter",matchNotificationProvidersBy:"abgeglichen nach Name",matchFilaments:"Filamente",matchFilamentsBy:"abgeglichen nach Name + Typ + Marke",matchArchives:"Archive",matchArchivesBy:"abgeglichen nach Inhaltshash (immer übersprungen)",matchPendingUploads:"Ausstehende Uploads",matchPendingUploadsBy:"abgeglichen nach Dateiname",matchSettingsTemplates:"Einstellungen & Vorlagen",matchSettingsTemplatesBy:"immer überschrieben",replaceExisting:"Vorhandene Daten ersetzen",keepExisting:"Vorhandene Daten behalten",overwriteDescription:"Bereits vorhandene Elemente mit Sicherungsdaten überschreiben",keepDescription:"Nur Elemente wiederherstellen, die noch nicht vorhanden sind",overwriteCaution:"Achtung:",overwriteWarning:"Das Überschreiben ersetzt Ihre aktuellen Konfigurationen durch Daten aus der Sicherung. Drucker-Zugangscodes werden aus Sicherheitsgründen nie überschrieben.",cancel:"Abbrechen",processingBackup:"Sicherungsdatei wird verarbeitet...",itemsRestored:"Wiederhergestellt",itemsSkipped:"Übersprungen",restored:"Wiederhergestellt",skippedAlreadyExist:"Übersprungen (bereits vorhanden)",filesCategory:"Dateien (3MF, Thumbnails, etc.)",andMore:"...und {{count}} weitere",newApiKeysGenerated:"Neue API-Schlüssel generiert",keysShownOnce:"Diese Schlüssel werden nur einmal angezeigt. Kopieren Sie sie jetzt!",copy:"Kopieren",noDataFound:"In der Sicherungsdatei wurden keine Daten zur Wiederherstellung gefunden.",close:"Schließen",scheduledBackup:"Geplante Backups",scheduledBackupDescription:"Backup-Snapshots automatisch nach Zeitplan erstellen. Ausgabeverzeichnis kann auf einen NAS oder externen Speicher gemountet werden.",frequency:"Frequenz",backupTime:"Zeit",retention:"Aufbewahrung",retentionDescription:"Anzahl der zu behaltenden Backups",outputPath:"Ausgabepfad",outputPathPlaceholder:"Standard: {{path}}",outputPathDescription:"Leer lassen für den Standardort",runNow:"Jetzt ausführen",backupFiles:"Backup-Dateien",noScheduledBackups:"Noch keine Backups",deleteBackup:"Löschen",deleteBackupConfirm:"Diese Backup-Datei löschen?",backupRunning:"Backup läuft...",scheduledBackupComplete:"Backup erfolgreich abgeschlossen",scheduledBackupFailed:"Backup fehlgeschlagen",nextBackup:"Nächstes Backup",backupSize:"Größe",localTimeHint:"Ortszeit ({{tz}})",defaultPathLabel:"Standard:",categories:{settings:"Einstellungen",notification_providers:"Benachrichtigungsanbieter",notification_templates:"Benachrichtigungsvorlagen",smart_plugs:"Smart Plugs",printers:"Drucker",filaments:"Filamente",maintenance_types:"Wartungstypen",archives:"Archive",projects:"Projekte",pending_uploads:"Ausstehende Uploads",external_links:"Externe Links",api_keys:"API-Schlüssel"}},tags:{title:"Tags",addTag:"Tag hinzufügen",editTag:"Tag bearbeiten",deleteTag:"Tag löschen",tagName:"Tag-Name",tagColor:"Tag-Farbe",noTags:"Keine Tags",deleteConfirm:"Möchten Sie diesen Tag wirklich löschen?",manageTags:"Tags verwalten"},uploadModal:{title:"3MF-Dateien hochladen",dragDrop:"3MF-Dateien hierher ziehen",or:"oder",browseFiles:"Dateien durchsuchen",extractionInfo:"Das Druckermodell wird automatisch aus den 3MF-Datei-Metadaten extrahiert.",uploaded:"hochgeladen",failed:"fehlgeschlagen",uploading:"Wird hochgeladen...",upload:"Hochladen",uploadFailed:"Hochladen fehlgeschlagen"},editArchive:{title:"Archiv bearbeiten",name:"Name",namePlaceholder:"Druckname",printer:"Drucker",noPrinter:"Kein Drucker",project:"Projekt",noProject:"Kein Projekt",itemsPrinted:"Gedruckte Teile",itemsPrintedHelp:"Anzahl der in diesem Druckauftrag produzierten Teile",notes:"Notizen",notesPlaceholder:"Notizen zu diesem Druck hinzufügen...",externalLink:"Externer Link",externalLinkPlaceholder:"https://printables.com/model/...",externalLinkHelp:"Link zu Printables, Thingiverse oder anderer Quelle",tags:"Tags",tagsPlaceholder:"Tags hinzufügen...",addMoreTags:"Weitere Tags hinzufügen...",matchingTags:'Übereinstimmend mit "{{query}}"',existingTags:"Vorhandene Tags",clickToAdd:"(zum Hinzufügen klicken)",status:"Status",failureReason:"Fehlergrund",selectReason:"Grund auswählen...",photos:"Fotos des Druckergebnisses",photosHelp:"Klicken Sie auf + um Fotos Ihres Druckergebnisses hinzuzufügen",printResult:"Druckergebnis",saving:"Wird gespeichert...",failureReasons:{adhesionFailure:"Haftungsfehler",spaghettiDetached:"Spaghetti / Abgelöst",layerShift:"Schichtversatz",cloggedNozzle:"Verstopfte Düse",filamentRunout:"Filament aufgebraucht",warping:"Verformung",stringing:"Fadenziehen",underExtrusion:"Unterextrusion",powerFailure:"Stromausfall",userCancelled:"Vom Benutzer abgebrochen",other:"Sonstiges"},statuses:{completed:"Abgeschlossen",failed:"Fehlgeschlagen",aborted:"Abgebrochen",printing:"Druckt"}},kProfiles:{title:"K-Profile",noPrintersConfigured:"Keine Drucker konfiguriert",addPrinterInSettings:"Fügen Sie einen Drucker in den Einstellungen hinzu, um K-Profile zu verwalten",noActivePrinters:"Keine aktiven Drucker",enablePrinterConnection:"Aktivieren Sie eine Druckerverbindung, um K-Profile anzuzeigen",loadingProfiles:"Lade K-Profile...",printerOffline:"Drucker offline",printerOfflineDesc:"Der ausgewählte Drucker ist nicht verbunden. Schalten Sie ihn ein, um K-Profile anzuzeigen.",noMatchingProfiles:"Keine passenden Profile",noMatchingProfilesDesc:"Keine Profile entsprechen Ihren Suchkriterien",noKProfiles:"Keine K-Profile",noKProfilesDesc:"Keine Druckvorschub-Profile für {{diameter}}mm Düse gefunden",createFirstProfile:"Erstes Profil erstellen",printer:"Drucker",nozzle:"Düse",refresh:"Aktualisieren",addProfile:"Profil hinzufügen",export:"Exportieren",import:"Importieren",select:"Auswählen",selectAll:"Alle auswählen",delete:"Löschen",searchPlaceholder:"Nach Name oder Filament suchen...",allExtruders:"Alle Extruder",leftOnly:"Nur links",rightOnly:"Nur rechts",allFlow:"Alle Flusstypen",hfOnly:"Nur HF",sOnly:"Nur S",sortName:"Sortieren: Name",sortKValue:"Sortieren: K-Wert",sortFilament:"Sortieren: Filament",leftExtruder:"Linker Extruder",rightExtruder:"Rechter Extruder",modal:{addTitle:"K-Profil hinzufügen",editTitle:"K-Profil bearbeiten",profileName:"Profilname",profileNamePlaceholder:"Mein PLA-Profil",kValue:"K-Wert",kValuePlaceholder:"0,020",kValueHelp:"Typischer Bereich: 0,01 - 0,06 für PLA, 0,02 - 0,10 für PETG",filament:"Filament",selectFilament:"Filament auswählen...",noFilamentsHelp:"Keine Filamente gefunden. Erstellen Sie zuerst ein K-Profil in Bambu Studio.",flowType:"Flusstyp",highFlow:"Hoher Durchfluss",standard:"Standard",nozzleSize:"Düsengröße",extruder:"Extruder",extruders:"Extruder",left:"Links",right:"Rechts",notes:"Notizen (lokal gespeichert)",notesPlaceholder:"Notizen zu diesem Profil hinzufügen...",notesHelp:"Notizen werden in Bambuddy gespeichert, nicht auf dem Drucker",syncing:"Synchronisiert mit Drucker...",savingExtruder:"Speichern auf Extruder {{current}}/{{total}}...",pleaseWait:"Bitte warten"},deleteConfirm:{title:"Profil löschen",cannotUndo:"Dies kann nicht rückgängig gemacht werden",message:'Möchten Sie "{{name}}" wirklich vom Drucker löschen?'},bulkDelete:{title:"Profile löschen",cannotUndo:"Dies kann nicht rückgängig gemacht werden",message:"Möchten Sie wirklich {{count}} ausgewählte Profile vom Drucker löschen?"},toast:{profileSaved:"K-Profil gespeichert",profilesSaved:"K-Profil auf {{count}} Extrudern gespeichert",selectAtLeastOneExtruder:"Bitte wählen Sie mindestens einen Extruder aus",profileDeleted:"K-Profil gelöscht",profilesDeleted:"{{count}} Profile gelöscht",exportedProfiles:"{{count}} Profile exportiert",importedProfiles:"{{count}} von {{total}} Profilen importiert",noProfilesToExport:"Keine Profile zum Exportieren",invalidFileFormat:"Ungültiges Dateiformat",failedToParseImport:"Import-Datei konnte nicht gelesen werden",failedToSaveBatch:"K-Profile konnten nicht gespeichert werden",noteSaved:"Notiz gespeichert",failedToSaveNote:"Notiz konnte nicht gespeichert werden"},permission:{noRead:"Sie haben keine Berechtigung, Profile zu aktualisieren",noCreate:"Sie haben keine Berechtigung, Profile hinzuzufügen",noUpdate:"Sie haben keine Berechtigung, K-Profile zu aktualisieren",noDelete:"Sie haben keine Berechtigung, K-Profile zu löschen",noExport:"Sie haben keine Berechtigung, Profile zu exportieren",noImport:"Sie haben keine Berechtigung, Profile zu importieren"}},virtualPrinter:{title:"Virtueller Drucker",running:"Läuft",stopped:"Gestoppt",description:{default:"Aktiviere einen virtuellen Drucker, der in Bambu Studio und OrcaSlicer erscheint. Dateien, die an diesen Drucker gesendet werden, werden direkt archiviert ohne zu drucken.",proxy:"Aktiviere einen Proxy, der Slicer-Datenverkehr an einen echten Drucker weiterleitet, um Ferndruck über jedes Netzwerk zu ermöglichen."},enable:{title:"Virtuellen Drucker aktivieren",visibleInSlicer:'Sichtbar als "Bambuddy" in der Slicer-Erkennung',proxyingTo:"Proxy zu {{name}}",notActive:"Nicht aktiv"},model:{title:"Druckermodell",description:"Wähle welches Druckermodell emuliert werden soll.",restartWarning:"Das Ändern des Modells startet den virtuellen Drucker neu"},accessCode:{title:"Zugangscode",isSet:"Zugangscode ist gesetzt",notSet:"Kein Zugangscode gesetzt - erforderlich zum Aktivieren",placeholder:"8-Zeichen-Code eingeben",placeholderChange:"Neuen Code eingeben zum Ändern",hint:"Muss genau 8 Zeichen lang sein. Wird von Slicern zur Authentifizierung verwendet.",charCount:"({{count}}/8)"},targetPrinter:{title:"Zieldrucker",configured:"Proxy-Ziel konfiguriert",notConfigured:"Kein Zieldrucker ausgewählt - erforderlich für Proxy-Modus",placeholder:"Drucker auswählen...",hint:"Wähle den Drucker aus, an den der Slicer-Datenverkehr weitergeleitet werden soll. Der Drucker muss im LAN-Modus sein.",noPrinters:"Keine Drucker konfiguriert. Füge zuerst einen Drucker hinzu, um den Proxy-Modus zu verwenden."},remoteInterface:{title:"Netzwerkschnittstelle überschreiben",configured:"Schnittstellenüberschreibung aktiv",optional:"Optional - verwenden wenn die automatisch erkannte IP falsch ist (z.B. mehrere NICs, Docker, VPN)",placeholder:"Automatisch erkennen (Standard)...",hint:"Überschreibt die per SSDP beworbene und im TLS-Zertifikat verwendete IP-Adresse. Nützlich wenn Bambuddy mehrere Netzwerkschnittstellen hat."},mode:{title:"Modus",archive:"Archivieren",archiveDesc:"Dateien sofort archivieren",review:"Überprüfen",reviewDesc:"Vor dem Archivieren überprüfen",queue:"Warteschlange",queueDesc:"Archivieren und zur Warteschlange hinzufügen",proxy:"Proxy",proxyDesc:"An echten Drucker weiterleiten"},autoDispatch:{title:"Automatisch starten",description:"Drucke automatisch starten, wenn sie zur Warteschlange hinzugefügt werden. Wenn deaktiviert, warten Drucke auf manuellen Start."},queueForceColorMatch:{title:"Farbabgleich erzwingen",description:"Druckaufträge nur an Drucker senden, bei denen der genaue Filament-Typ und die genaue Farbe geladen sind. Standardmäßig deaktiviert — ohne diese Option verwendet die Warteschlange nur den Drucker-Modell-Abgleich und wählt möglicherweise einen Drucker mit der falschen Farbe."},tailscaleDisabled:{title:"Tailscale-Integration",description:"Aktivieren, um diesen VP als per Tailscale erreichbar zu markieren. Zeigt die Tailscale-Adresse des Hosts an, damit du weißt, welche IP du im Slicer eintragen musst. Der CA-Import bleibt unverändert — diese Option hat keinen Einfluss auf Zertifikate."},setupRequired:{title:"Einrichtung erforderlich",description:"Die virtuelle Druckerfunktion erfordert zusätzliche Systemkonfiguration, bevor sie funktioniert. Dies beinhaltet Portweiterleitung, Firewall-Regeln und plattformspezifische Einstellungen.",readGuide:"Lese die Einrichtungsanleitung vor dem Aktivieren"},archiveNameSource:{title:"Quelle des Archivnamens",description:'Lege fest, wie neue Archive benannt werden, wenn Dateien über den virtuellen Drucker eintreffen. "Metadaten" verwendet den im 3MF eingebetteten Titel des Slicers (Standard). "Dateiname" nutzt den Dateinamen, den Bambu Studio per FTP gesendet hat — praktisch, wenn der Job im Dialog "Zum Drucker senden" umbenannt wurde.',metadata:"Metadaten",filename:"Dateiname"},caCert:{title:"Slicer-Zertifikat",description:"Virtuelle Drucker verwenden ein TLS-Zertifikat, das von der Bambuddy-CA signiert ist. Importieren Sie dieses CA-Zertifikat einmalig in den Vertrauensspeicher Ihres Slicers, damit er die Verbindung akzeptiert — kein Abrufen über die Kommandozeile mehr nötig.",copy:"Kopieren",copied:"Kopiert",download:"Herunterladen",fingerprint:"SHA-256"},howItWorks:{title:"So funktioniert es",step1:"Im selben LAN erscheinen virtuelle Drucker automatisch in deinem Slicer (Bambu Studio / OrcaSlicer). Aus anderen Netzwerken füge sie manuell per IP-Adresse und Zugangscode hinzu.",step2:'Im Archiv-, Überprüfungs- und Warteschlangen-Modus verwende die "Senden"-Funktion im Slicer, um 3MF-Dateien an Bambuddy zu senden. Der Slicer zeigt "Druck erfolgreich" — die Datei wird gespeichert, nicht gedruckt.',step3:"Im Proxy-Modus leitet der virtuelle Drucker den gesamten Datenverkehr an einen echten Drucker weiter — Drucke starten sofort wie bei einer direkten Verbindung."},status:{title:"Status-Details",printerName:"Druckername",model:"Modell",serialNumber:"Seriennummer",mode:"Modus",pendingFiles:"Ausstehende Dateien",targetPrinter:"Zieldrucker",ftpPort:"FTP-Port",mqttPort:"MQTT-Port",ftpConnections:"FTP-Verbindungen",mqttConnections:"MQTT-Verbindungen"},toast:{updated:"Virtuelle Druckereinstellungen aktualisiert",failedToUpdate:"Einstellungen konnten nicht aktualisiert werden",copyFailed:"Kopieren fehlgeschlagen — bitte Text manuell markieren",accessCodeRequired:"Bitte zuerst einen Zugangscode setzen",targetPrinterRequired:"Bitte zuerst einen Zieldrucker auswählen",bindIpRequired:"Bitte zuerst eine Bind-IP setzen",accessCodeEmpty:"Zugangscode darf nicht leer sein",accessCodeLength:"Zugangscode muss genau 8 Zeichen lang sein",created:"Virtueller Drucker erstellt",failedToCreate:"Virtueller Drucker konnte nicht erstellt werden",deleted:"Virtueller Drucker gelöscht",failedToDelete:"Virtueller Drucker konnte nicht gelöscht werden"},list:{title:"Virtuelle Drucker",add:"Hinzufügen",addFirst:"Virtuellen Drucker hinzufügen",empty:"Keine virtuellen Drucker konfiguriert. Fügen Sie einen hinzu, um zu beginnen."},bindIp:{title:"Bind-Interface",placeholder:"Interface auswählen...",hint:"Netzwerkinterface, an das dieser virtuelle Drucker gebunden wird. Muss pro Drucker eindeutig sein."},proxy:{accessCodeHint:"Im Proxy-Modus den Zugangscode des Zieldruckers im Slicer verwenden. Die Verbindung wird transparent zum echten Drucker weitergeleitet."},addDialog:{title:"Virtuellen Drucker hinzufügen",name:"Name",hint:"Sie können Zugangscode, Zieldrucker und andere Einstellungen nach dem Erstellen konfigurieren.",create:"Erstellen"},deleteConfirm:{title:"Virtuellen Drucker löschen",message:'Möchten Sie "{{name}}" wirklich löschen? Dies stoppt alle Dienste für diesen Drucker.'}},modelViewer:{openInSlicer:"Im Slicer öffnen",tabs:{model:"3D-Modell",gcode:"G-Code Vorschau"},notAvailable:"nicht verfügbar",notSliced:"nicht geslicet",plates:"Platten",allPlates:"Alle Platten",plateNumber:"Platte {{number}}",plateCount:"{{count}} Platte",plateCount_other:"{{count}} Platten",objectCount:"{{count}} Objekt",objectCount_other:"{{count}} Objekte",filamentCount:"{{count}} Filament",filamentCount_other:"{{count}} Filamente",eta:"ETA {{minutes}} Min",noPreview:"Keine Vorschau für diese Datei verfügbar",pagination:{pageOf:"Seite {{current}} von {{total}}",prev:"Zurück",next:"Weiter"},errors:{failedToLoad:"Datei konnte nicht geladen werden",noMeshes:"Keine Meshes in 3MF-Datei gefunden",unsupportedFormat:"Nicht unterstütztes Dateiformat"}},maintenanceDescriptions:{lubricateCarbonRods:"Schmiermittel auf Karbonstäbe für sanfte Bewegung auftragen",lubricateRails:"Schmiermittel auf Linearschienen für sanfte Bewegung auftragen",cleanNozzle:"Hotend und Düse reinigen, um Verstopfungen zu verhindern",checkBelts:"Riemenspannung für präzise Drucke überprüfen",cleanBuildPlate:"Druckplatte für bessere Haftung reinigen",checkExtruder:"Extruderzahnräder auf Verschleiß prüfen",checkCooling:"Sicherstellen, dass Lüfter ordnungsgemäß funktionieren",generalInspection:"Allgemeine Druckerinspektion",cleanCarbonRods:"Karbonstäbe reinigen, um Reibung zu reduzieren",lubricateSteelRods:"Schmiermittel auf Stahlstangen für sanfte Bewegung auftragen",cleanSteelRods:"Stahlstangen reinigen, um Reibung zu reduzieren",cleanLinearRails:"Linearschienen abwischen, um Staub und Schmutz zu entfernen",checkPtfeTube:"PTFE-Schlauch auf Verschleiß oder Beschädigung prüfen",replaceHepaFilter:"HEPA-Filter für Luftqualität ersetzen",replaceCarbonFilter:"Aktivkohlefilter ersetzen",lubricateLeftNozzleRail:"Linke Düsenschiene schmieren (H2-Serie)"},smartPlugs:{offline:"Offline",admin:"Admin",openPlugAdminPage:"Plug-Admin-Seite öffnen",deleteSmartPlug:"Smart Plug löschen",turnOnSmartPlug:"Smart Plug einschalten",turnOffSmartPlug:"Smart Plug ausschalten",turnOn:"Einschalten",turnOff:"Ausschalten",addSmartPlug:{scanningNetwork:"Netzwerk wird durchsucht...",chooseEntity:"Entität auswählen...",connectionFailed:"Verbindung fehlgeschlagen",searchEntities:"Entitäten suchen...",searchPowerSensors:"Leistungssensoren suchen...",searchEnergySensors:"Energiesensoren suchen...",placeholders:{plugName:"Wohnzimmer Steckdose",mqttStateOnValue:"ON, true, 1",mqttSameAsPower:"Gleich wie Leistungs-Topic oder anders"}},linkedTo:"Verbunden mit:",monitorOnly:"Nur Überwachung",alerts:"Alarme",scheduleOn:"Ein {{time}}",scheduleOff:"Aus {{time}}",on:"Ein",off:"Aus",power:"Leistung",kwhToday:"kWh Heute",settings:"Einstellungen",automationSettings:"Automatisierungseinstellungen",showInSwitchbar:"In Schaltleiste anzeigen",quickAccessSidebar:"Schnellzugriff über Seitenleiste",enabled:"Aktiviert",enableAutomation:"Automatisierung für diesen Stecker aktivieren",autoOn:"Auto Ein",autoOnDescription:"Einschalten wenn Druck startet",autoOff:"Auto Aus",autoOffDescription:"Ausschalten wenn Druck abgeschlossen (einmalig)",autoOffPersistent:"Aktiviert lassen",autoOffPersistentDescription:"Zwischen Drucken aktiviert bleiben statt einmalig",autoOffAfterDrying:"Automatisch aus nach Trocknung",autoOffAfterDryingDescription:"Ausschalten, wenn AMS-Trocknung abgeschlossen ist",delayAfterDryingMinutes:"Verzögerung nach Trocknung (Minuten)",turnOffDelayMode:"Ausschaltverzögerungsmodus",time:"Zeit",temp:"Temp.",delayMinutes:"Verzögerung (Minuten)",tempThreshold:"Temperaturschwelle (°C)",tempThresholdDescription:"Schaltet aus wenn die Düse unter diese Temperatur abkühlt",edit:"Bearbeiten",deleteConfirm:'Möchten Sie "{{name}}" wirklich löschen? Dies kann nicht rückgängig gemacht werden.',turnOnConfirm:'Möchten Sie "{{name}}" wirklich einschalten?',turnOffConfirm:'Möchten Sie "{{name}}" wirklich ausschalten? Dies unterbricht die Stromversorgung des angeschlossenen Geräts.',failedToTurn:'{{name}}" konnte nicht {{action}} werden',unknown:"Unbekannt",addTitle:"Smart Plug hinzufügen",editTitle:"Smart Plug bearbeiten",stopScanning:"Suche beenden",discoverTasmota:"Tasmota Geräte suchen",foundDevices:"{{count}} Gerät(e) gefunden - zum Auswählen klicken:",noDevicesFound:"Keine Tasmota Geräte in Ihrem Netzwerk gefunden",haNotConfigured:"Home Assistant ist nicht konfiguriert. Einrichtung unter",haSettingsPath:"Einstellungen → Netzwerk → Home Assistant",selectEntity:"Entität auswählen *",ipAddress:"IP-Adresse *",nameLabel:"Name *",username:"Benutzername",password:"Passwort",authHint:"Leer lassen, wenn Ihr Tasmota-Gerät keine Authentifizierung benötigt",linkToPrinter:"Mit Drucker verbinden",noPrinter:"Kein Drucker (nur manuelle Steuerung)",linkingDescription:"Verknüpfung ermöglicht automatisches Ein-/Ausschalten bei Druckstart/-ende",powerAlerts:"Leistungsalarme",alertAbove:"Alarm wenn über (W)",alertBelow:"Alarm wenn unter (W)",alertDescription:"Benachrichtigung wenn der Stromverbrauch diese Schwellenwerte überschreitet. Leer lassen um diese Richtung zu deaktivieren.",dailySchedule:"Tagesplan",turnOnAt:"Einschalten um",turnOffAt:"Ausschalten um",scheduleDescription:"Den Stecker automatisch täglich zu diesen Zeiten ein-/ausschalten. Leer lassen um diese Aktion zu überspringen.",showOnPrinterCard:"Auf Druckerkarte anzeigen",displayOnPrinterCard:"Schaltfläche auf Druckerkarte anzeigen",connectedResult:"Verbunden!",deviceLabel:"Gerät: {{name}} - ",stateLabel:"Status: {{state}}",test:"Test",delete:"Löschen",save:"Speichern",add:"Hinzufügen",cancel:"Abbrechen",failedToStartScan:"Suche konnte nicht gestartet werden",nameRequired:"Name ist erforderlich",entityRequired:"Entität ist für Home Assistant Stecker erforderlich",mqttTopicRequired:"Mindestens ein MQTT-Topic muss für Leistung, Energie oder Statusüberwachung konfiguriert sein",loadingEntities:"Entitäten werden geladen...",loading:"Laden...",failedToLoadEntities:"Entitäten konnten nicht geladen werden: {{error}}",noEntitiesMatching:'Keine Entitäten gefunden die "{{search}}" entsprechen',noEntitiesAvailable:"Keine Entitäten verfügbar",searchingEntities:"Alle Entitäten durchsuchen ({{count}} gefunden)",showingEntities:"Zeige switch, light, input_boolean ({{count}} verfügbar)",energyMonitoringOptional:"Energieüberwachung (Optional)",energyMonitoringHint:"Sensoren suchen und auswählen, die Leistungs-/Energiedaten liefern.",powerSensorW:"Leistungssensor (W)",energyTodayKwh:"Energie Heute (kWh)",totalEnergyKwh:"Gesamtenergie (kWh)",noMatchingSensors:"Keine passenden Sensoren",none:"Keine",mqttNotConfigured:"MQTT-Broker nicht konfiguriert. Broker-Adresse einstellen unter",mqttSettingsPath:"Einstellungen → Netzwerk → MQTT-Veröffentlichung",mqttNotConfiguredSuffix:"(Sie müssen die Veröffentlichung nicht aktivieren, nur die Broker-Details ausfüllen).",mqttMonitorOnlyDescription:"MQTT-Stecker empfangen Leistungs-/Energiedaten über MQTT-Abonnement. Ein-/Ausschalten ist nicht verfügbar - verwenden Sie Ihren MQTT-Broker oder Ihr Home-Automation-System.",powerMonitoring:"Leistungsüberwachung",energyMonitoring:"Energieüberwachung",stateMonitoring:"Statusüberwachung",optional:"optional",topic:"Thema",jsonPath:"JSON-Pfad",multiplier:"Multiplikator",onValue:"EIN-Wert",mqttPowerHint:`JSON-Pfad extrahiert Wert aus JSON-Payload (z.B. "power_l1"). Leer lassen wenn Topic rohe numerische Werte sendet.
+ON value: the exact string that means "ON". Leave empty for auto-detect (ON, true, 1).`,restControl:"Control",restOnUrl:"Turn ON URL",restOffUrl:"Turn OFF URL",restOnBody:"ON Request Body",restOffBody:"OFF Request Body",restMethod:"HTTP Method",restHeaders:"Custom Headers (JSON)",restStatusUrl:"Status URL",restStatusPath:"State JSON Path",restStatusOnValue:"ON Value",restPowerUrl:"Power URL",restPowerPath:"Power JSON Path",restPowerMultiplier:"Power Multiplier",restEnergyUrl:"Energy URL",restEnergyPath:"Energy JSON Path",restEnergyMultiplier:"Energy Multiplier",restUrlRequired:"At least one URL (ON or OFF) is required for REST plugs",restHeadersHint:'e.g. {"Authorization": "Bearer your-token"}',restBodyHint:'e.g. ON, {"state": "on"}',restStatusHint:"URL to poll for current state",restPathHint:"e.g. state or data.power.status",restPowerUrlHint:"Separate URL for power data (uses Status URL if empty)",restEnergyUrlHint:"Separate URL for energy data (uses Status URL if empty)",restEnergyHint:"Each value can use its own URL or fall back to the Status URL. Use multipliers for unit conversion (e.g. 0.001 to convert Wh to kWh).",testConnection:"Test Connection",connectionSuccess:"Connection successful",noSwitchesInSwitchbar:"No switches in switchbar",enableSwitchbarHint:'Enable "Show in Switchbar" in Settings > Smart Plugs'},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"Email",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"SMTP email notifications",telegram:"Notifications via Telegram bot",discord:"Send to Discord channel via webhook",ntfy:"Free, self-hostable push notifications",pushover:"Simple, reliable push notifications",callmebot:"Free WhatsApp notifications via CallMeBot",webhook:"Generic HTTP POST to any URL",homeassistant:"Persistent notifications in Home Assistant dashboard"},lastSuccess:"Last: {{date}}",error:"Error",printer:"Printer:",allPrinters:"All printers",sendTestNotification:"Send Test Notification",eventSettings:"Event Settings",enabled:"Enabled",sendFromProvider:"Send notifications from this provider",printEvents:"Print Events",printerStatus:"Printer Status",amsAlarms:"AMS Alarms",amsHtAlarms:"AMS-HT Alarms",printQueue:"Print Queue",start:"Start",plateCheck:"Plate Check",complete:"Complete",failed:"Failed",stopped:"Stopped",progress:"Progress",offline:"Offline",lowFilament:"Low Filament",maintenance:"Maintenance",amsHumidity:"AMS Humidity",amsTemp:"AMS Temp",amsHtHumidity:"AMS-HT Humidity",amsHtTemp:"AMS-HT Temp",bedCooled:"Bed Cooled",firstLayer:"First Layer",quiet:"Quiet",digest:"Digest {{time}}",printStarted:"Print Started",plateNotEmpty:"Plate Not Empty",plateNotEmptyDescription:"Objects detected before print",printCompleted:"Print Completed",bedCooledLabel:"Bed Cooled",bedCooledDescription:"Bed cooled below threshold after print",firstLayerCompleteLabel:"First Layer Complete",firstLayerCompleteDescription:"Notify with snapshot when first layer finishes",missingSpoolAssignmentLabel:"Missing Spool Assignment",missingSpoolAssignmentDescription:"Notify when print starts and required trays have no assigned spool",printFailed:"Print Failed",printStopped:"Print Stopped",progressMilestones:"Progress Milestones",progressMilestonesDescription:"Notify at 25%, 50%, 75%",printerOffline:"Printer Offline",printerError:"Printer Error",lowFilamentLabel:"Low Filament",maintenanceDue:"Maintenance Due",maintenanceDueDescription:"Notify when maintenance is needed",amsHumidityHigh:"AMS Humidity High",amsHumidityHighDescription:"Regular AMS humidity exceeds threshold",amsTemperatureHigh:"AMS Temperature High",amsTemperatureHighDescription:"Regular AMS temperature exceeds threshold",amsHtHumidityHigh:"AMS-HT Humidity High",amsHtHumidityHighDescription:"AMS-HT humidity exceeds threshold",amsHtTemperatureHigh:"AMS-HT Temperature High",amsHtTemperatureHighDescription:"AMS-HT temperature exceeds threshold",inventoryAlerts:"Inventory Alerts",stockReorderAlert:"Reorder Alert",stockReorderAlertDescription:"SKU has reached its reorder point",stockBreakAlert:"Stock Break Alert",stockBreakAlertDescription:"Stock will run out before replenishment arrives",jobAdded:"Job Added",jobAddedDescription:"Job added to queue",jobAssigned:"Job Assigned",jobAssignedDescription:"Model-based job assigned to printer",jobStarted:"Job Started",jobStartedDescription:"Queue job started printing",jobWaiting:"Job Waiting",jobWaitingDescription:"Job waiting for filament or printer",jobSkipped:"Job Skipped",jobSkippedDescription:"Job skipped (previous failed)",jobFailed:"Job Failed",jobFailedDescription:"Job failed to start",queueComplete:"Queue Complete",queueCompleteDescription:"All queue jobs finished",quietHours:"Quiet Hours",noNotificationsDuring:"No notifications during these hours",editProviderToChangeQuietHours:"Edit provider to change quiet hours",dailyDigest:"Daily Digest",batchNotifications:"Batch notifications into a single daily summary",sendAt:"Send at {{time}}",editProviderToChangeDigestTime:"Edit provider to change digest time",edit:"Edit",deleteProvider:"Delete Notification Provider",deleteConfirm:'Are you sure you want to delete "{{name}}"? This cannot be undone.',delete:"Delete",addTitle:"Add Notification Provider",editTitle:"Edit Notification Provider",nameLabel:"Name *",namePlaceholder:"My Notifications",providerTypeLabel:"Provider Type *",configuration:"Configuration",testConfiguration:"Test Configuration",printerFilter:"Printer Filter",onlyFromPrinter:"Only send notifications for events from this printer",quietHoursDnd:"Quiet Hours (Do Not Disturb)",quietStart:"Start",quietEnd:"End",dailyDigestLabel:"Daily Digest",sendDigestAt:"Send digest at",digestCollected:"Events will be collected and sent as a single summary at this time",notificationEvents:"Notification Events",progressPercent:"(25%, 50%, 75%)",bedCooledAfterPrint:"(after print completes)",eventPriority:{sectionTitle:"ntfy Priority",helpNtfy:"Pick a priority for each enabled event. ntfy uses these to escalate alerts (sound, visibility, push behavior). Levels not set here use the ntfy server default.",min:"Min",low:"Low",default:"Default",high:"High",urgent:"Urgent"},cancel:"Cancel",save:"Save",add:"Add",nameRequired:"Name is required",fieldRequired:"{{field}} is required",phoneNumber:"Phone Number",apiKey:"API Key",serverUrl:"Server URL",topic:"Topic",authToken:"Auth Token",userKey:"User Key",appToken:"App Token",priority:"Priority",botToken:"Bot Token",chatId:"Chat ID",smtpServer:"SMTP Server",smtpPort:"SMTP Port",security:"Security",authentication:"Authentication",username:"Username",password:"Password",fromEmail:"From Email",toEmail:"To Email",webhookUrl:"Webhook URL",payloadFormat:"Payload Format",authorization:"Authorization",titleFieldName:"Title Field Name",messageFieldName:"Message Field Name",editTemplate:"Edit Template: {{name}}",titleLabel:"Title",bodyLabel:"Body",titlePlaceholder:"Notification title...",bodyPlaceholder:"Notification body...",availableVariables:"Available Variables",clickToInsert:"Click to insert at cursor position in body",livePreview:"Live Preview",hide:"Hide",show:"Show",loadingPreview:"Loading preview...",enterTemplateContent:"Enter template content to see preview",titlePreview:"Title:",bodyPreview:"Body:",resetToDefault:"Reset to Default",titleRequired:"Title is required",bodyRequired:"Body is required",notificationLog:"Notification Log",showFailedOnly:"Failed only",last24Hours:"Last 24 hours",last7Days:"Last 7 days",last30Days:"Last 30 days",last90Days:"Last 90 days",justNow:"Just now",noFailedNotifications:"No failed notifications",noNotificationsLogged:"No notifications logged",unknownProvider:"Unknown Provider",logTitle:"Title",logMessage:"Message",logError:"Error",logProvider:"Provider: {{type}}",logTime:"Time: {{time}}",refresh:"Refresh",clearOld:"Clear Old",statsSummary:"Last {{days}} days:",statsNotifications:"notifications",statsSent:"{{count}} sent",statsFailed:"{{count}} failed",eventTypes:{print_start:"Print Started",print_complete:"Print Complete",print_failed:"Print Failed",print_stopped:"Print Stopped",print_progress:"Progress",printer_offline:"Printer Offline",printer_error:"Printer Error",filament_low:"Low Filament",maintenance_due:"Maintenance Due",test:"Test"},userEmail:{title:"Notifications",emailNotifications:"Email Notifications",emailNotificationsDesc:"Receive email notifications for your own print jobs. Emails are sent using the system SMTP settings configured in Advanced Authentication.",sendingTo:"Notifications will be sent to",noEmailWarning:"Your account does not have an email address. Contact an administrator to add one.",printJobNotifications:"Print Job Notifications",printJobNotificationsDesc:"Choose which events trigger email notifications for print jobs you submit.",printJobStarts:"Print Job Starts",printJobStartsDesc:"Get notified when your print job begins.",printJobFinishes:"Print Job Finishes",printJobFinishesDesc:"Get notified when your print job completes successfully.",printErrors:"Print Errors",printErrorsDesc:"Get notified when your print job fails or encounters an error.",printJobStops:"Print Job Stops",printJobStopsDesc:"Get notified when your print job is cancelled or stopped.",saveSuccess:"Notification preferences saved.",saveError:"Failed to save notification preferences."}},richTextEditor:{bold:"Bold",italic:"Italic",underline:"Underline",bulletList:"Bullet List",numberedList:"Numbered List",alignLeft:"Align Left",alignCenter:"Align Center",alignRight:"Align Right",addLink:"Add Link",removeLink:"Remove Link"},externalLinks:{noLinksConfigured:"No external links configured",deleteLink:"Delete Link",removeCustomIcon:"Remove custom icon",openInNewTab:"Open in new tab",placeholders:{linkName:"My Link"}},keyboardShortcuts:{title:"Keyboard Shortcuts",navigation:"Navigation",archivesSection:"Archives",kProfilesSection:"K-Profiles",generalSection:"General",shortcuts:{goToPrinters:"Go to Printers",goToArchives:"Go to Archives",goToQueue:"Go to Queue",goToStats:"Go to Statistics",goToProfiles:"Go to Cloud Profiles",goToSettings:"Go to Settings",focusSearch:"Focus search",openUploadModal:"Open upload modal",clearSelection:"Clear selection / blur input",contextMenu:"Context menu on cards",refreshProfiles:"Refresh profiles",newProfile:"New profile",exitSelectionMode:"Exit selection mode",showHelp:"Show this help"},footer:"Press Esc or click outside to close"},notificationLog:{title:"Notification Log",events:{printStarted:"Print Started",printComplete:"Print Complete",printFailed:"Print Failed",printStopped:"Print Stopped",progress:"Progress",printerOffline:"Printer Offline",printerError:"Printer Error",lowFilament:"Low Filament",maintenanceDue:"Maintenance Due",test:"Test"},timeAgo:{justNow:"Just now",minutesAgo:"{{minutes}}m ago",hoursAgo:"{{hours}}h ago"}},restoreBackup:{title:"Restore Backup",restoring:"Restoring...",restoreComplete:"Restore Complete",restoreFailed:"Restore Failed",importSettings:"Import settings from a backup file",pleaseWait:"Please wait while your data is being restored",clickToSelect:"Click to select backup file (.json or .zip)",howDuplicateHandling:"How duplicate handling works:",categories:{printers:"Printers",smartPlugs:"Smart Plugs",notificationProviders:"Notification Providers",filaments:"Filaments",archives:"Archives",pendingUploads:"Pending Uploads",settingsTemplates:"Settings & Templates"},matchingInfo:{printers:"matched by serial number",smartPlugs:"matched by IP address",notificationProviders:"matched by name",filaments:"matched by name + type + brand",archives:"matched by content hash",pendingUploads:"matched by filename",settingsTemplates:"always overwritten"},replaceExisting:"Replace existing data",keepExisting:"Keep existing data",replaceDescription:"Overwrite items that already exist with backup data",keepDescription:"Only restore items that don't already exist",caution:"Caution:",cautionText:"Overwriting will replace your current configurations with backup data. Printer access codes are never overwritten for security.",itemsRestored:"Items Restored",itemsSkipped:"Items Skipped",restored:"Restored",skipped:"Skipped (already exist)",filesLabel:"Files (3MF, thumbnails, etc.)",newApiKeysGenerated:"New API Keys Generated",newApiKeysWarning:"These keys are only shown once. Copy them now!",processingBackup:"Processing backup file...",noDataFound:"No data was found to restore in the backup file.",failedToRestore:"Failed to restore backup. Please check the file format."},backupExport:{title:"Export Backup",selectData:"Select data to include",selectAll:"Select All",selectNone:"Select None",categoryDescriptions:{settings:"Language, theme, update preferences",notifications:"ntfy, Pushover, Discord, etc.",templates:"Custom message templates",smartPlugs:"Tasmota plug configurations",externalLinks:"Sidebar links to external services",printers:"Printer info (access codes excluded)",plateDetection:"Empty plate reference images",filaments:"Filament types and costs",maintenance:"Custom maintenance schedules",archives:"All print data + files (3MF, thumbnails, photos)",projects:"Projects, BOM items, and attachments",pendingUploads:"Virtual printer uploads awaiting review",apiKeys:"Webhook API keys (new keys generated on import)"},requiresPrinters:"Requires Printers to be selected",zipFileWarning:"ZIP file will be created.",zipFileDescription:"Includes all 3MF files, thumbnails, timelapses, and photos. This may take a while and result in a large file.",includeAccessCodes:"Include Access Codes",includeAccessCodesDescription:"For transferring to another machine",includeAccessCodesWarning:"Access codes will be included in plain text. Keep this backup file secure!",categoriesSelected:"{{selectedCount}} categories selected"},pendingUploads:{placeholders:{notes:"Add notes about this print..."},discardUpload:"Discard Upload",archiveAllUploads:"Archive All Uploads",discardAllUploads:"Discard All Uploads",archive:"Archive",timeAgo:{justNow:"Just now",minutesAgo:"{{minutes}}m ago",hoursAgo:"{{hours}}h ago",daysAgo:"{{days}}d ago"}},apiBrowser:{placeholders:{requestBody:"JSON request body...",searchEndpoints:"Search endpoints..."}},configureAmsSlot:{title:"Configure AMS Slot",slotConfigured:"Slot Configured!",configuringSlot:"Configuring slot:",slotLabel:"{{ams}} Slot {{slot}}",searchPresets:"Search presets...",colorPlaceholder:"Color name or hex (e.g., brown, FF8800)",clearCustomColor:"Clear custom color",noCloudPresets:"No cloud presets. Login to Bambu Cloud to sync.",noPresetsAvailable:"No presets available. Login to Bambu Cloud or import local profiles.",noMatchingPresets:"No matching presets found.",custom:"Custom",builtin:"Built-in",settingsSentToPrinter:"Settings sent to printer",filamentProfile:"Filament Profile",kProfileLabel:"K Profile (Pressure Advance)",filteringFor:"Filtering for: {{material}}",noKProfile:"No K profile (use default 0.020)",noMatchingKProfiles:"No matching K profiles found. Default K=0.020 will be used.",selectFilamentFirst:"Select a filament profile first",kFromCalibration:"K={{value}} from printer calibration",customColorLabel:"Custom Color (optional)",presetColors:"{{name}} colors:",showLessColors:"Show less colors",showMoreColors:"Show more colors",clear:"Clear",hexLabel:"Hex: #{{hex}}",resetting:"Resetting...",resetSlot:"Reset Slot",cancel:"Cancel",configuring:"Configuring...",configureSlot:"Configure Slot"},githubBackup:{title:"Git Backup",history:"History",downloadBackup:"Download Backup",restoreBackup:"Restore Backup",noBackupsYet:"No backups yet"},emailSettings:{placeholders:{fromName:"BamBuddy"}},tagManagement:{searchTags:"Search tags...",renameTag:"Rename tag",deleteTag:"Delete tag"},notificationTemplates:{placeholders:{title:"Notification title...",body:"Notification body..."}},batchTag:{placeholders:{newTag:"Enter new tag..."}},photoGallery:{deletePhoto:"Delete Photo"},filamentHoverCard:{copySpoolUuid:"Copy spool UUID"},kProfilesView:{hasNote:"Has note",copyProfile:"Copy profile"},layout:{openMenu:"Open menu",noPermissionSystemInfo:"You do not have permission to view system information"},dashboard:{dragToReorder:"Drag to reorder",hideWidget:"Hide widget"},notificationProviderCard:{deleteNotificationProvider:"Delete Notification Provider"},fileManagerModal:{closeFileManager:"Close file manager",sortFiles:"Sort files",goToParentFolder:"Go to parent folder",threeView:"3D View"},embeddedCameraViewer:{refreshStream:"Refresh stream",close:"Close",zoomOut:"Zoom out",resetZoom:"Reset zoom",zoomIn:"Zoom in",dragToResize:"Drag to resize"},timelapseViewer:{skipBack5s:"Skip back 5s",skipForward5s:"Skip forward 5s"},notificationProviders:{descriptions:{email:"SMTP email notifications",telegram:"Notifications via Telegram bot",discord:"Send to Discord channel via webhook",ntfy:"Free, self-hostable push notifications",pushover:"Simple, reliable push notifications",callmebot:"Free WhatsApp notifications via CallMeBot",webhook:"Generic HTTP POST to any URL"}},logViewer:{searchPlaceholder:"Search message or logger name...",noLogEntries:"No log entries found"},switchbarPopover:{noSwitchesInSwitchbar:"No switches in switchbar"},projectPageModal:{placeholders:{title:"Title",designer:"Designer",license:"License",description:"Enter description...",profileTitle:"Profile Title",profileDescription:"Profile description..."}},spoolmanSettings:{},time:{unknown:"-",waiting:"Waiting",justNow:"Just now",now:"Now",minsAgo:"{{count}}m ago",inMins:"in {{count}}m",hoursAgo:"{{count}}h ago",inHours:"in {{count}}h",daysAgo:"{{count}}d ago",inDays:"in {{count}}d"},spoolbuddy:{nav:{dashboard:"Dashboard",ams:"AMS",inventory:"Inventory",writeTag:"Write",settings:"Settings"},status:{nfcReady:"NFC Ready",nfcOff:"NFC Off",offline:"Offline",online:"Online",noPrinters:"No printers",deviceOffline:"Device Offline",waitingConnection:"Waiting for device connection...",systemReady:"System Ready",status:"Status"},dashboard:{readyToScan:"Ready to scan",idleMessage:"Place a spool on the scale to identify it",nfcHint:"NFC tag will be read automatically",device:"Device",syncWeight:"Sync Weight",weightSynced:"Synced!",unknownTag:"Unknown Tag",newTag:"New Tag Detected",onScale:"on scale",linkSpool:"Link to Spool",linkTagTitle:"Link Tag to Spool",linkTag:"Link Tag",selectSpool:"Select a spool to link this tag to:",noUntagged:"No spools without tags found",tagDetected:"Tag detected",noTag:"No tag",tagId:"Tag",grossWeight:"Gross weight",spoolSize:"Spool size",close:"Close",currentSpool:"Current Spool",plateReady:"Plate ready: {{name}}",plateReadyLabel:"Plates ready to clear",plateClearAction:"Clear",plateClearedToast:"Plate marked as cleared",plateClearFailed:"Could not mark plate as cleared"},modal:{spoolDetected:"Spool Detected",assignToAms:"Assign to AMS",syncWeight:"Sync Weight",weightSynced:"Synced!",syncing:"Syncing...",newTagDetected:"New Tag Detected",addToInventory:"Add to Inventory",assignToAmsTitle:"Assign to AMS",selectSlot:"Select a slot",assign:"Assign",assigning:"Assigning...",assignSuccess:"Assigned!",assignPendingInsert:"Assigned. Slot will configure when you insert the spool.",assignError:"Failed to assign spool. Please try again.",noPrinterSelected:"Select a printer...",noAmsDetected:"No AMS detected on this printer",slot:"Slot"},weight:{noReading:"No reading",stable:"Stable",measuring:"Measuring...",tare:"Tare",calibrate:"Calibrate"},spool:{remaining:"Remaining",material:"Material",brand:"Brand",color:"Color",coreWeight:"Core",labelWeight:"Label",scaleWeight:"Scale",netWeight:"Net",lastUsed:"Last used"},ams:{noData:"No AMS detected",connectAms:"Connect an AMS to see filament slots",noPrinter:"No printer selected",selectPrinter:"Select a printer from the top bar",printerDisconnected:"Printer disconnected",humidity:"Humidity",level:"Level",active:"Active",slot:"Slot",empty:"Empty"},inventory:{search:"Search spools...",empty:"No spools in inventory",noResults:"No matching spools",spools:"spools",addSpool:"Add Spool"},settings:{tabDevice:"Device",tabDisplay:"Display",tabScale:"Scale",tabUpdates:"Updates",nfcReader:"NFC Reader",type:"Type",connection:"Connection",notConnected:"N/A",deviceInfo:"Device Info",hostname:"Host",uptime:"Uptime",systemConfig:"Backend & Auth",backendUrl:"Bambuddy Backend URL",apiToken:"API Token",apiTokenPlaceholder:"Enter API token",saveConfig:"Save Config",systemQueued:"Config queued.",nfcDiagnostic:"NFC Diagnostic",scaleDiagnostic:"Scale Diagnostic",readTagDiagnostic:"Read Tag Diagnostic",testNfc:"Test reader",testScale:"Test accuracy",testReadTag:"Read tag",systemFieldsRequired:"Backend URL is required.",brightness:"Brightness",saved:"Saved",noBacklight:"No DSI backlight detected. Brightness control requires a DSI display.",screenBlank:"Screen Blank Timeout",screenBlankDesc:"Screen turns off after inactivity. Touch to wake.",displayNote:"Brightness is applied as a software filter.",scaleCalibration:"Scale Calibration",currentWeight:"Current weight",tareOffset:"Tare",calFactor:"Factor",knownWeight:"Known weight",calStep1:"Remove all items from the scale and press Set Zero.",calStep2:"Place known weight on scale.",setZero:"Set Zero",calibrateNow:"Calibrate",calibrated:"Calibrated",tareSet:"Tare command sent. Waiting for device...",tareComplete:"Tare complete!",tareTimedOut:"Tare timed out — is the SpoolBuddy daemon running?",tareFailed:"Failed to send tare command",zeroSet:"Zero point set. Place known weight on scale.",calibrationDone:"Calibration complete!",calibrationFailed:"Calibration failed",lastCalibrated:"Last calibrated",stable:"Stable",settling:"Settling...",firmware:"Firmware",scale:"Scale",noDevice:"No SpoolBuddy device found",daemonVersion:"Daemon Version",currentVersion:"Current",versionPending:"Waiting for daemon...",checking:"Checking...",checkUpdates:"Check for Updates",updateAvailable:"Update available",updateInstructions:"Update via SSH: run the SpoolBuddy install script to upgrade.",upToDate:"Up to date",includeBeta:"Include beta versions"},writeTag:{tabExisting:"Existing Spool",tabNew:"New Spool",tabReplace:"Replace Tag",searchPlaceholder:"Search by material, color, brand...",noUntaggedSpools:"No spools without tags",noTaggedSpools:"No spools with tags",selectSpool:"Select a spool, then place a blank NTAG on the reader",placeTag:"Place an NTAG on the reader",tagReady:"Tag detected — ready to write",writeTag:"Write Tag",replaceTag:"Replace Tag",writing:"Writing tag...",waiting:"Waiting for SpoolBuddy...",writeSuccess:"Tag written successfully!",writeFailed:"Write failed",queueFailed:"Failed to queue write command",tryAgain:"Try Again",cancel:"Cancel",replaceWarning:"Old tag will be unlinked. New tag will replace it.",deviceOffline:"SpoolBuddy is offline",material:"Material",colorName:"Color Name",color:"Color",brand:"Brand",weight:"Weight (g)",createSpool:"Create Spool",creating:"Creating...",spoolCreated:"Spool created! Ready to write.",createFailed:"Failed to create spool",incompleteDataWarning:"Tag written with incomplete Spoolman data"},quickMenu:{printerPower:"Printer Power",systemControls:"System",restartDaemon:"Restart Daemon",restartBrowser:"Restart Browser",reboot:"Reboot",shutdown:"Shutdown",swipeToClose:"Swipe down to close",confirmTitle:"Confirm",confirmShutdown:"Are you sure you want to shut down the SpoolBuddy? You will need physical access to turn it back on.",confirmReboot:"Are you sure you want to reboot the SpoolBuddy?",confirmRestartDaemon:"Restart the SpoolBuddy daemon? NFC and scale will be temporarily unavailable.",confirmRestartBrowser:"Restart the kiosk browser? The display will briefly go blank.",confirm:"Confirm",confirmPlugOn:"Turn on {{name}}?",confirmPlugOff:"Turn off {{name}}?",turnOn:"Turn On",turnOff:"Turn Off"}},diagnostic:{modalTitle:"Connection diagnostic — {{name}}",running:"Running diagnostic...",runningElapsed:"Running diagnostic... ({{elapsed}}s)",waitingForReportHint:"Listening for the printer to publish a status report — this can take up to {{max}} seconds.",runFailed:"Diagnostic could not run: {{error}}",retry:"Run again",runButton:"Run diagnostic",sectionTitle:"Connection Diagnostic",sectionDescription:"Check why a printer won't connect or won't print — port reachability, LAN developer mode, Docker network mode, and credentials.",noPrinters:"No printers configured.",overall:{ok:"No problems found — the printer connection looks healthy.",warnings:"The printer should work, but some things need attention.",problems:"Found problems that explain why the printer won't connect or print."},check:{port_mqtt:{title:"Control port (MQTT 8883)",pass:"Reachable — the printer is accepting control connections.",fail:"Port 8883 is unreachable. The printer is powered off, on a different IP address, or a firewall is blocking it. Verify the printer IP and that nothing blocks port 8883."},port_ftps:{title:"File transfer port (FTPS 990)",pass:"Reachable — sending print files will work.",warn:"Port 990 is unreachable. Monitoring may still work, but sending prints to the printer will fail. Make sure port 990 is not blocked."},port_rtsps:{title:"Camera port (RTSPS 322)",pass:"Reachable — the camera stream will work.",warn:"Port 322 is unreachable. The live camera view will not work. This does not affect printing."},network_mode:{title:"Docker network mode",pass:"Running in host network mode.",warn:'Bambuddy is running in Docker bridge networking. Printer discovery and the Virtual Printer need host network mode — recreate the container with "network_mode: host".',skip:"Not running in Docker — not applicable."},subnet:{title:"Network subnet",pass:"The printer and Bambuddy are on the same subnet.",warn:"The printer ({{printer_ip}}) and Bambuddy ({{host_ip}}) are on different subnets. They may not reach each other unless routing between the subnets is configured.",skip:"Subnet could not be determined — skipped."},mqtt_auth:{title:"Printer credentials",pass:"The printer accepted the connection.",fail:"The printer is reachable but rejected the connection. The access code or serial number is most likely wrong. The access code changes every time Developer Mode is toggled — re-copy it from the printer screen.",skip:"Not checked — the printer could not be reached."},developer_mode:{title:"LAN Developer Mode",pass:"Developer Mode is enabled.",fail:"Developer Mode is OFF on the printer. Enable it in the printer's LAN settings — and confirm with OK. Without it, prints will not start.",skip:"Could not be checked — requires a live connection to the printer."},printer_publishing:{title:"Printer is publishing status",pass:"The printer is publishing status updates — AMS, filaments, and K-profiles will mirror correctly to the slicer.",fail:"The MQTT broker accepted the connection but the printer has not published any status reports. This is almost always a wrong or mis-cased serial number — the device/<serial>/report topic is case-sensitive. Re-check the serial in printer settings against the screen on the printer.",skip:"Could not be checked — requires a live connection to the printer."}}},systemHealth:{sectionTitle:"System Health",sectionDescription:"Scans recent logs for known issues you can usually fix yourself, before they turn into a support ticket.",rescan:"Re-scan",clean:"No known issues found in the last {{times}} log entries.",logUnavailable:"File logging is disabled, so logs cannot be scanned. Enable file logging to use this check.",learnMore:"How to fix",fixLabel:"Fix:",occurrences:"Seen {{times}}× — last at {{lastSeen}}",category:{layer8:"You can fix this",environment:"Environment",bug:"Please report this"},signature:{"ftp-auth-rejected":{name:"Printer rejected the access code",cause:"The printer refused the file-transfer login. The access code is wrong, or it changed after Developer Mode was toggled.",fix:"Re-copy the access code from the printer screen (LAN settings) and update it in the printer's settings in Bambuddy."},"ftp-connection-timeout":{name:"File-transfer connection timed out",cause:"Bambuddy could not reach the printer's file-transfer port (FTPS 990). The port is blocked, or the printer is off or on another subnet.",fix:"Make sure nothing blocks port 990 between Bambuddy and the printer, and that both are on the same network."},"ftp-ssl-error":{name:"Secure file-transfer handshake failed",cause:"The TLS handshake with the printer's file-transfer server failed. This is often a firewall or outdated printer firmware.",fix:"Update the printer firmware and check that no firewall or proxy intercepts the connection on port 990."},"mqtt-connection-flapping":{name:"Printer connection keeps dropping",cause:"The control connection (MQTT 8883) repeatedly disconnects and reconnects — usually a weak network path or a partially blocked port.",fix:"Check the Wi-Fi signal at the printer, prefer a wired connection, and make sure port 8883 is reliably reachable."},"camera-connection-refused":{name:"Camera stream unreachable",cause:"The live camera could not be reached on port RTSPS 322. The port is blocked, or the camera or LAN liveview is off on the printer.",fix:"Enable the camera and LAN liveview on the printer, and make sure port 322 is not blocked. This does not affect printing."},"database-locked":{name:"Database write contention",cause:'The SQLite database is hitting "database is locked" errors under load — common when running several printers at once.',fix:"Switch Bambuddy to an external PostgreSQL database. See the PostgreSQL guide in the documentation."}}},vpDiagnostic:{title:"Setup check — {{name}}",runButton:"Run setup check",running:"Running setup check...",runFailed:"Could not run the setup check: {{error}}",retry:"Run again",overall:{ok:"All checks passed — this virtual printer is set up correctly.",warnings:"The virtual printer should work, but some things need attention.",problems:"Found problems that explain why the slicer can't see or use this virtual printer."},check:{enabled:{title:"Virtual printer enabled",fail:"This virtual printer is switched off. Toggle it on to make it discoverable."},running:{title:"Services running",fail:"The virtual printer is enabled but its services are not running. Check the Bambuddy log — a bind IP conflict or a permission error usually stops them."},bind_interface:{title:"Bind network interface",fail:"The bind interface is not set, or no longer exists on this host. Pick a current interface in the Bind Interface dropdown."},access_code:{title:"Access code set",fail:"No access code is set. The slicer must be given the same 8-character access code you set here."},target_printer:{title:"Target printer",fail:"No target printer is selected. Proxy mode needs a real printer to forward to.",warn:"The target printer is offline right now — proxying will resume once it reconnects."},port_ftps:{title:"File-upload service (port {{port}})",fail:"Nothing is listening on port {{port}} of the bind IP, so the slicer cannot upload files. A port conflict on this interface is the usual cause."},port_mqtt:{title:"Control service (port {{port}})",fail:"Nothing is listening on port {{port}} of the bind IP, so the slicer cannot connect or show status."},port_bind:{title:"Discovery service (port {{port}})",fail:"Nothing is listening on port {{port}} of the bind IP, so the slicer's discovery handshake fails."},certificate:{title:"TLS certificate",pass:"Certificate ready. Make sure the Bambuddy CA certificate (above) is imported into your slicer's trust store.",fail:"The TLS certificate for this virtual printer is missing. Check that the Bambuddy data directory is writable."}}},bugReport:{title:"Report a Bug",description:"Description",descriptionPlaceholder:"What went wrong? Please describe the issue...",email:"Email (optional)",emailPlaceholder:"your@email.com",emailPrivacy:"If provided, your email will be included in a collapsed section of the GitHub issue so the maintainer can follow up.",screenshot:"Screenshot",uploadOrPaste:"Upload, paste, or drag an image",dataCollectedSummary:"What data is included in the report?",dataIncluded:"Included:",dataIncludedList:"App version, OS, architecture, Python version, database stats (counts only), printer models, nozzle counts, firmware versions, connectivity status, integration status (Spoolman, MQTT, HA), non-sensitive settings, network interface count, Docker details, dependency versions.",dataNeverIncluded:"Never included:",dataNeverIncludedList:"Printer names, serial numbers, access codes, passwords, IP addresses, email addresses, API keys, tokens, webhook URLs, hostnames, or usernames.",submit:"Submit",startLogging:"Start Debug Logging",stepEnableLogging:"Debug logging enabled",stepReproduce:"Reproduce the issue now",stepStopLogging:"Stop & submit report",stopAndSubmit:"Stop & Submit",maxDuration:"Auto-stops after {{minutes}} min",stoppingLogs:"Collecting logs & submitting...",submitting:"Submitting bug report...",submittingStepConnection:"Running printer connectivity checks",submittingStepVirtualPrinters:"Running virtual-printer setup checks",submittingStepLogScan:"Scanning recent logs for known issues",submittingStepSubmit:"Submitting report to GitHub",submitSuccess:"Bug report submitted successfully!",submitFailed:"Failed to submit bug report",diagnosticChecking:"Checking printer connections...",diagnosticHealthy:"Connection check passed — no problems found on your printers.",diagnosticSummary:"{{problems}} of {{total}} printers have connection issues",diagnosticIntro:"One or more printers have a connection problem that may be causing your issue. Expand a printer below to see the fix — resolving it could solve the problem without a bug report. You can still submit a report below.",logHealthSummary:"Known issues found in your logs",logHealthIntro:"Recent logs match known problems. Check the fixes below — resolving them could solve your issue without a bug report. You can still submit a report below.",thankYou:"Thank you!",submitted:"Your bug report has been submitted.",viewIssue:"View Issue",unexpectedError:"An unexpected error occurred"},failureDetection:{title:"AI Failure Detection",description:"Monitor prints with a self-hosted Obico ML API and act on detected failures automatically.",mlUrl:"Obico ML API URL",mlUrlHint:"Base URL of your self-hosted Obico ml_api container (e.g. http://192.168.1.10:3333).",test:"Test",testSuccess:"ML API reachable and healthy.",testFailed:"Could not reach the ML API.",sensitivity:"Sensitivity",sensitivityLow:"Low (fewer false positives)",sensitivityMedium:"Medium (balanced)",sensitivityHigh:"High (detect early, more false positives)",sensitivityHint:"Adjusts the confidence thresholds that trigger warnings and failures.",action:"Action on detected failure",actionNotify:"Notify only",actionPause:"Pause print",actionPauseOff:"Pause and cut power",pollInterval:"Poll interval (seconds)",pollIntervalHint:"How often to check each printer while it is printing. Minimum 5s, maximum 120s.",externalUrlMissing:"External URL is not set.",externalUrlHint:"The ML API fetches the camera snapshot by URL. Set the External URL in General settings so the ML API container can reach Bambuddy.",perPrinterTitle:"Monitored Printers",perPrinterHint:"Choose which printers the detection service watches.",monitorAll:"Monitor all connected printers",statusTitle:"Status",serviceRunning:"Service running",thresholds:"Low / High thresholds",activePrinters:"Active prints",noActivePrints:"No prints currently running.",historyTitle:"Recent Detections",noHistory:"No detections yet."},makerworld:{title:"MakerWorld",description:"Paste a MakerWorld model URL to import and print it directly from Bambuddy — without leaving for the Bambu Handy app.",pasteUrlHeader:"Import from MakerWorld",pasteUrlPlaceholder:"https://makerworld.com/en/models/… or paste any MakerWorld link",resolveButton:"Resolve",signInRequiredTitle:"Bambu Cloud sign-in required to download",signInRequiredBody:"You can browse model details anonymously, but MakerWorld requires a Bambu Cloud account to download 3MF files.",openCloudSettings:"Open Cloud settings",untitledModel:"Untitled model",byCreator:"by {{name}}",downloadsCount:"{{count}} downloads",licensePrefix:"License",alreadyImported:"Already in library",openOnMakerworld:"Open on MakerWorld",alreadyInLibrary:"This model is already in your library — find it in File Manager → MakerWorld",importSuccess:"Imported {{filename}} — saved to File Manager → MakerWorld",platesHeader:"Plates ({{count}})",plateDefaultName:"Plate {{n}}",materialCount:"{{count}} filaments",amsRequired:"AMS required",slicedFor:"Sliced for {{printer}}",alsoCompatible:"Also marked compatible: {{printers}}",importToLibrary:"Save",sliceIn:"Save & Slice in {{slicer}}",disclaimer:"MakerWorld integration uses community-documented API endpoints. Bambuddy is not affiliated with or endorsed by MakerWorld or Bambu Lab.",lastImportSuccess:"Imported to your library",lastImportAlreadyInLibrary:"Already in your library",viewInLibrary:"View in File Manager",openInBambuStudio:"Open in Bambu Studio",openInOrcaSlicer:"Open in OrcaSlicer",importTo:"Import to file manager",recentImportsHeader:"Recent imports",phaseResolving:"Resolving",phaseDownloading:"Downloading",folderAuto:"MakerWorld (default)",importAll:"Import all",importAllProgress:"Importing {{current}}/{{total}}",openGallery:"Open image gallery",galleryPrev:"Previous image",galleryNext:"Next image",deleteImport:"Remove from library",importDeleting:"Removing…",importDeleted:"Removed from library",confirmDelete:"Remove {{filename}} from the library? This deletes the local file but the plate can be re-imported from MakerWorld.",errors:{resolveFailed:"Could not resolve that MakerWorld URL.",downloadFailed:"Download failed. Please try again.",deleteFailed:"Could not remove the file from the library."}},gcodeViewer:{back:"Back",backToArchives:"Back to Print Archives",backToFiles:"Back to File Manager"},libraryTrash:{title:"Trash",headerButton:"Trash",headerTooltip:"View files moved to the trash",backToFiles:"Back to File Manager",subtitleAdmin:"Deleted files stay here for {{days}} days, then auto-delete. This view shows trashed files for all users.",subtitleUser:"Deleted files stay here for {{days}} days, then auto-delete.",loading:"Loading trash…",loadError:"Could not load the trash.",empty:"The trash is empty.",summary:"{{count}} files · {{size}}",emptyTrash:"Empty trash",restore:"Restore",purgeNow:"Delete now",autoPurgeIn:"Auto-deletes in {{when}}",days:"days",retentionLabel:"Auto-delete after",selectAll:"Select all",selectOne:"Select {{filename}}",selectionCount:"{{count}} selected",bulkRestore:"Restore selected",bulkPurge:"Delete selected",col:{filename:"File",folder:"Folder",size:"Size",deleted:"Moved to trash",autoPurge:"Auto-deletes",owner:"Owner",actions:"Actions"},confirm:{purgeTitle:"Delete permanently?",purgeBody:"{{filename}} will be deleted from disk and cannot be restored.",emptyTitle:"Empty the trash?",emptyBody:"All {{count}} files will be deleted from disk. This cannot be undone.",bulkPurgeTitle:"Delete selected files permanently?",bulkPurgeBody:"The {{count}} selected files will be deleted from disk and cannot be restored.",cta:"Delete permanently"},toast:{restored:"File restored.",restoreFailed:"Could not restore the file.",purged:"File deleted permanently.",purgeFailed:"Could not delete the file.",emptied:"Deleted {{count}} file(s) from trash.",emptyFailed:"Could not empty the trash.",retentionSaved:"Auto-delete set to {{days}} days.",retentionFailed:"Could not save retention setting.",bulkRestored:"Restored {{count}} file(s).",bulkPurged:"Deleted {{count}} file(s)."}},libraryPurge:{title:"Purge old files",headerButton:"Purge old",headerTooltip:"Bulk-move old files to trash",description:"Sweep old files out of your library in one shot. Files with a print history are aged by their last-printed date; files that were never printed are aged by their upload date.",ageLabel:"Move files older than",days:"days",includeNeverPrinted:"Include files that have never been printed",effectsTitle:"What happens when you click Purge",effect1:"Matching files are moved to Trash — they are not deleted from disk yet.",effect2:"You can restore them from Trash at any time until the retention window expires.",effect3:"After retention, the trash sweeper permanently removes them from disk.",effect4:"Files in external (linked) folders are skipped — Bambuddy never deletes bytes it does not own.",previewLoading:"Checking how many files match…",previewFailed:"Could not preview the purge.",previewSummary:"{{count}} files · {{size}} would move to trash",andMore:"…and {{count}} more",warning:"Trashed files still count against storage until the retention window expires. Empty the Trash afterwards to free disk immediately.",confirmCta:"Move {{count}} to trash",purging:"Moving to trash…",toast:{success:"Moved {{count}} file(s) to trash.",failed:"Could not purge files."}},libraryAutoPurge:{enableLabel:"Auto-purge old files",enableDescription:"Runs the admin purge once per day. Files go to Trash first — they are not deleted immediately.",ageLabel:"Auto-purge files older than",ageDescription:"Minimum 7 days, maximum 10 years. Uses the same age rule as the manual Purge button.",days:"days",includeNeverPrinted:"Include files that have never been printed",saveFailed:"Could not save auto-purge settings."},archivePurge:{headerButton:"Purge old",headerTooltip:"Bulk-delete old archives",title:"Purge old archives",description:"Clear out old print history. Each archive is aged by its most recent print completion — reprinting an archive refreshes its age, so active work is never purged.",ageLabel:"Delete archives not printed in the last",days:"days",effectsTitle:"What happens when you click Purge",effect1:"Each matching archive is hidden from the listings and its files are removed from disk (3MF, thumbnail, timelapse, source 3MF, F3D design file, photos).",effect2:"The archive row stays in the database so Quick Stats keeps the filament, time, cost, and energy contribution — same as the single-archive delete default.",effect3:'Tick "Also remove from statistics" below to drop the Quick Stats contribution too (matches the single-archive delete option). That path is irreversible.',effect4:"Reprinting an archive refreshes its age clock, so archives you still use are safe.",purgeStatsLabel:"Also remove from statistics",purgeStatsHint:"Drops the matching archives from Quick Stats (filament, time, cost, energy). Without this, Quick Stats keeps every contribution and only the files leave disk.",previewLoading:"Checking how many archives match…",previewFailed:"Could not preview the purge.",previewSummary:"{{count}} archives · {{size}} would be removed",andMore:"…and {{count}} more",warning:"Files are removed from disk and cannot be restored. Download or favourite anything you want to keep before continuing.",confirmCta:"Remove {{count}} archive(s)",purging:"Removing…",toast:{success:"Removed {{count}} archive(s).",failed:"Could not purge archives."}},archiveAutoPurge:{enableLabel:"Auto-purge old archives",enableDescription:"Once per day, hides archives from the listings and removes their files from disk when they have not been printed within the threshold. Reprinting an archive resets the clock.",ageLabel:"Auto-delete archives not printed in the last",ageDescription:"Minimum 7 days, maximum 10 years. Based on the most recent print completion — reprinting an archive refreshes its age. Removes the 3MF, thumbnail, timelapse, source 3MF, F3D, and photos.",days:"days",purgeStatsLabel:"Also remove from statistics",purgeStatsDescription:"When enabled, the daily sweeper also drops each purged archive from Quick Stats (filament, time, cost, energy). Default off — Quick Stats keeps the contribution, only the files leave disk.",runNow:"Purge archives now",saveFailed:"Could not save auto-purge settings."},cameraTokens:{title:"Camera API Tokens",navTitle:"Camera API tokens",description:"Long-lived tokens for embedding the camera stream into Home Assistant, Frigate, kiosks, or any other tool that needs a stable URL. Each token is camera-stream-only and can be revoked at any time.",loading:"Loading…",confirmRevoke:{title:"Revoke this token?",body:'Any device using "{{name}}" will lose access immediately. This cannot be undone.',cancel:"Cancel",confirm:"Revoke"},create:{title:"Create new token",nameLabel:"Token name",namePlaceholder:"e.g. Home Assistant",daysLabel:"Days until expiry",submit:"Create",hint:"Maximum lifetime is 365 days. The token value is shown only once on creation — copy it now."},created:{title:"Token created — copy it now",warning:"This is the only time this token will be visible. After you close this dialog you can never view it again.",copy:"Copy",dismiss:"I've saved it"},list:{myTitle:"My tokens",allTitle:"All users (admin view)",empty:"No tokens yet.",name:"Name",owner:"Owner",prefix:"Prefix",created:"Created",expires:"Expires",lastUsed:"Last used",revoke:"Revoke",expired:"Expired"},toast:{created:"Token created",createFailed:"Failed to create token",revoked:"Token revoked",revokeFailed:"Failed to revoke token",loadFailed:"Failed to load tokens",copied:"Copied to clipboard",copyFailed:"Copy failed — select and copy manually"}},forecast:{title:"Forecast",noSpools:"No active spools found. Add spools to your inventory to see forecast data.",noUsageData:"No usage data available — cannot project stock timeline.",sku:"SKU",material:"Material",stock:"Stock",dailyRate:"Rate",daysLeft:"Days Left",emptyBy:"Empty By",reorderBy:"Reorder By",actions:"Actions",trend:"Trend",estimated:"Est.",noData:"No data",timeframe:"Timeframe",chartTitle:"Projected Stock — Top 5 Materials",dashedLinesROP:"Dashed lines = reorder points",stockLevel:"Stock Level",reorderPoint:"Reorder Point",safetyMargin:"Safety Margin",trendLegend:"Trend (history-based, 95% service level)",estimatedLegend:"Estimated (weight delta)",noDataLegend:"No data",ropLabel:"ROP",ssLabel:"SS",safetyStockLegend:"Safety stock",stockArrivalLegend:"Stock arrival",stockoutLegend:"Stockout",alertCount_one:"{{count}} alert",alertCount_other:"{{count}} alerts",order:"Order",save:"Save",cancel:"Cancel",settingsSaved:"Settings saved",failedSaveSettings:"Failed to save settings",globalLeadTimeSaved:"Global lead time saved",globalLeadTime:"Global lead time",globalLeadTimeHint:"Global lead time floor — used in reorder point calculation for all SKUs",skuLeadTimeOverride:"SKU Lead Time Override",skuLeadTimeHint:"0 = use global lead time. Set >0 to override for this SKU.",safetyMarginLabel:"Safety Margin",effectiveLeadTime:"Effective Lead Time",effectiveLeadTimeHint:"max(global {{global}}d, SKU {{sku}}d)",reorderPointHint:"d̄ × LT + safety margin — order when stock hits this level",safetyMarginHint:"Statistical safety stock (z=1.65 × σ × √LT) + user-defined buffer",safetyMarginHintDays:"Buffer added on top of statistical safety stock.{{approx}}",safetyMarginHintDaysApprox:" ≈ {{g}}g at current rate.",safetyMarginHintG:"Fixed weight buffer added on top of statistical safety stock.{{approx}}",safetyMarginHintGApprox:" ≈ {{days}}d at current rate.",individualSpools:"Individual spools",labelWeight:"Label",spoolCount_one:"{{count}} spool",spoolCount_other:"{{count}} spools",stockBreakRisk:"Stock break risk",stockBreakDetail:"{{days}}d remaining, lead time {{lt}}d.",stockBreakBefore:"Stock break before replenishment",reorderNow:"Reorder now",reorderTriggerPassed:"Trigger date {{date}} has passed.",shoppingList:"Shopping List",shoppingListItems_one:"({{count}} item)",shoppingListItems_other:"({{count}} items)",shoppingListEmpty:"Shopping list is empty. Click the cart icon on any row to add items.",addToCart:"Add to shopping list",alertsSnoozed:"Mute alerts for this SKU",alertsEnabled:"Unmute alerts for this SKU",addedToCart:"Added to shopping list",failedAddItem:"Failed to add item",listView:"List",logisticsView:"Logistics",qty:"Qty",weight:"Weight",leadTime:"Lead Time",expectedRestock:"Expected Restock",status:"Status",note:"Note",pending:"Pending",purchased:"Purchased",received:"Received",markPurchased:"Mark as purchased",markReceived:"Mark as received — adds spools to Stock inventory",resetToPending:"Reset to pending",remove:"Remove",clearAll:"Clear all",downloadCsv:"CSV",addToCartTitle:"Add to Shopping List",byQuantity:"By Quantity",byDuration:"By Duration",numberOfSpools:"Number of spools",lastHowManyDays:"Should last how many days?",noUsageQty:"No usage data — quantity set to 1.",noteOptional:"Note (optional)",notePlaceholder:"e.g. for project X, urgent…",addNSpools_one:"Add {{count}} spool",addNSpools_other:"Add {{count}} spools",onArrival:"On Arrival",stockBreakIn:"Stock break in {{days}}d.",stockRunsOutBefore:"Stock runs out before the {{lt}}d lead time elapses.",atRate:"At {{rate}}g/day you need",moreSpools_one:"{{count}} more spool",moreSpools_other:"{{count}} more spools",bridgeGap:"to bridge the gap.",noReadAccess:"You do not have permission to view inventory forecasts.",noWriteAccess:"You do not have permission to modify forecast settings."}},ype={nav:{printers:"Drucker",archives:"Archiv",queue:"Druckwarteschlange",stats:"Statistiken",profiles:"Profile",maintenance:"Wartung",projects:"Projekte",inventory:"Filament",files:"Dateimanager",makerworld:"MakerWorld",notifications:"Benachrichtigungen",settings:"Einstellungen",system:"System",collapseSidebar:"Seitenleiste einklappen",expandSidebar:"Seitenleiste ausklappen",update:"Aktualisieren",updateAvailable:"Update verfügbar: v{{version}}",updateAvailableBanner:"Version {{version}} ist verfügbar!",viewUpdate:"Update anzeigen",viewOnGithub:"Auf GitHub ansehen",keyboardShortcuts:"Tastaturkürzel (?)",switchToLight:"Zum hellen Modus wechseln",switchToDark:"Zum dunklen Modus wechseln",switchToSystem:"Zum Systemmodus wechseln",smartSwitches:"Smart Switches",logout:"Abmelden",installApp:"App installieren",installAppSuccess:"Bambuddy wurde installiert"},common:{save:"Speichern",saving:"Speichern...",cancel:"Abbrechen",delete:"Löschen",edit:"Bearbeiten",add:"Hinzufügen",close:"Schließen",confirm:"Bestätigen",loading:"Lädt...",error:"Fehler",errorLoading:"Fehler beim Laden",retry:"Erneut versuchen",success:"Erfolg",warning:"Warnung",enabled:"Aktiviert",disabled:"Deaktiviert",yes:"Ja",no:"Nein",on:"An",off:"Aus",all:"Alle",none:"Keine",search:"Suchen",filter:"Filtern",sort:"Sortieren",refresh:"Aktualisieren",download:"Herunterladen",upload:"Hochladen",uploading:"Hochladen...",uploadFailed:"Hochladen fehlgeschlagen",actions:"Aktionen",status:"Status",name:"Name",description:"Beschreibung",date:"Datum",time:"Zeit",hours:"Stunden",minutes:"Minuten",seconds:"Sekunden",days:"Tage",enable:"Aktivieren",disable:"Deaktivieren",permissions:"Berechtigungen",noPrinters:"Keine Drucker konfiguriert",noData:"Keine Daten verfügbar",linkNotFound:"Link nicht gefunden",required:"Erforderlich",optional:"Optional",dismiss:"Schließen",apply:"Anwenden",reset:"Zurücksetzen",export:"Exportieren",import:"Importieren",clear:"Leeren",selectAll:"Alle auswählen",deselectAll:"Auswahl aufheben",noChange:"— Keine Änderung —",unchanged:"Unverändert",unassigned:"Nicht zugewiesen",unknown:"Unbekannt",unknownError:"Unbekannter Fehler",today:"Heute",tomorrow:"Morgen",asap:"Sofort",overdue:"Überfällig",now:"Jetzt",collapse:"Einklappen",expand:"Ausklappen",viewArchive:"Archiv anzeigen",viewInFileManager:"Im Dateimanager anzeigen",addedBy:"Hinzugefügt von {{username}}",prints:"Drucke",more:"+{{count}} weitere",ascending:"Aufsteigend",descending:"Absteigend",back:"Zurück",copy:"Kopieren",copied:"Kopiert!",printer:"Drucker",remove:"Entfernen",type:"Typ",print:"Drucken",rename:"Umbenennen",move:"Verschieben",create:"Erstellen",duplicate:"Duplizieren",left:"Links",right:"Rechts"},printers:{addPreflight:{checking:"Verbindung wird geprüft...",warning:"Einige Verbindungsprüfungen sind fehlgeschlagen. Dieser Drucker wird möglicherweise als offline angezeigt. Prüfe die Punkte unten, behebe was möglich ist, oder speichere trotzdem.",back:"Zurück",saveAnyway:"Trotzdem speichern"},title:"Drucker",addPrinter:"Drucker hinzufügen",editPrinter:"Drucker bearbeiten",deletePrinter:"Drucker löschen",printerName:"Druckername",serialNumber:"Seriennummer",ipAddress:"IP-Adresse / Hostname",accessCode:"Zugangscode",model:"Modell",nozzleCount:"Düsenanzahl",autoArchive:"Automatische Archivierung",status:{available:"Verfügbar",idle:"Bereit",printing:"Druckt",paused:"Pausiert",offline:"Offline",problem:"Problem",error:"Fehler",finished:"Fertig",unknown:"Unbekannt"},temperatures:{nozzle:"Düse",bed:"Druckbett",chamber:"Kammer"},progress:"{{percent}}% abgeschlossen",timeRemaining:"Noch {{time}}",deleteConfirm:'Möchten Sie "{{name}}" wirklich löschen?',maintenanceOk:"Wartung OK",maintenanceWarning:"{{count}} Warnung",maintenanceWarning_plural:"{{count}} Warnungen",maintenanceDue:"{{count}} fällig",maintenanceDue_plural:"{{count}} fällig",sort:{name:"Name",status:"Status",model:"Modell",location:"Standort",ascending:"Aufsteigend sortieren",descending:"Absteigend sortieren"},cardSize:{small:"Kleine Karten",medium:"Mittlere Karten",large:"Große Karten",extraLarge:"Extra große Karten"},hideOffline:"Offline ausblenden",nextAvailable:"Nächster verfügbar",powerOn:"Einschalten",offlinePrintersWithPlugs:"Offline-Drucker mit Smart-Plugs",noPrintersConfigured:"Noch keine Drucker konfiguriert",search:"Drucker suchen...",noSearchResults:"Keine Drucker entsprechen deiner Suche oder deinen Filtern",filter:{allStatuses:"Alle Status",allLocations:"Alle Standorte"},toolbar:{filters:"Filter",view:"Ansicht",actions:"Aktionen"},readyToPrint:"Druckbereit",external:"Extern",extL:"Ext-L",extR:"Ext-R",deleteArchives:"Druckarchive löschen",noLabel:"Keine Bezeichnung",printPreview:"Druckvorschau",width:"Breite",height:"Höhe",noObjectsFound:"Keine Objekte gefunden",objectsLoadedOnPrintStart:"Objekte werden beim Druckstart geladen",willBeSkipped:"Wird übersprungen",name:"Name",serialCannotBeChanged:"Seriennummer kann nicht geändert werden",locationHelp:"Dient zur Gruppierung von Druckern und zum Filtern von Warteschlangenaufträgen",wifiSignal:{veryWeak:"Sehr schwach",weak:"Schwach",fair:"Ausreichend",good:"Gut",excellent:"Ausgezeichnet"},maintenanceUpToDate:"Alle Wartungen aktuell - Klicken zum Anzeigen",chamberLightOn:"Kammerbeleuchtung einschalten",chamberLightOff:"Kammerbeleuchtung ausschalten",files:"Dateien",browseFiles:"Druckerdateien durchsuchen",autoOffAfterPrint:"Automatisches Ausschalten nach Druck",autoOffExecuted:"Auto-off wurde ausgeführt - Drucker einschalten zum Zurücksetzen",hmsErrors:"HMS-Fehler",viewHmsErrors:"{{count}} HMS-Fehler anzeigen",resume:"Fortsetzen",pause:"Pausieren",stop:"Stoppen",camera:"Kamera",skipObject:"Objekt überspringen",reconnect:"Neu verbinden",forceRefresh:"Aktualisierung erzwingen",forceRefreshSuccess:"Aktualisierung angefordert",mqttDebug:"MQTT-Debug",printerInformation:"Druckerinformationen",copyToClipboard:"Kopieren",copied:"Kopiert!",state:"Zustand",wifiSignalLabel:"WLAN-Signal",developerMode:"Entwicklermodus",enabled:"Aktiviert",disabled:"Deaktiviert",addedOn:"Hinzugefügt",sdCard:"SD-Karte",inserted:"Eingelegt",notInserted:"Nicht eingelegt",totalPrintHours:"Druckstunden",activeNozzle:"Aktiv: {{nozzle}} Düse",nozzleRack:"Düsenhalter",nozzleDocked:"Angedockt",nozzleMounted:"Montiert",nozzleActive:"Aktiv",nozzleIdle:"Inaktiv",nozzleDiameter:"Durchmesser",nozzleType:"Typ",nozzleStatus:"Status",nozzleFilament:"Filament",nozzleWear:"Verschleiß",nozzleMaxTemp:"Max. Temp",nozzleSerial:"Seriennr.",nozzleHardenedSteel:"Gehärteter Stahl",nozzleStainlessSteel:"Edelstahl",nozzleTungstenCarbide:"Wolframkarbid",nozzleFlow:"Durchfluss",nozzleHighFlow:"Hoher Durchfluss",nozzleStandardFlow:"Standard",firmwareUpdate:"Firmware-Update",firmwareInstructions:"Gehen Sie auf dem Touchscreen des Druckers zu",firmwareNav:"Navigieren Sie zu",settings:"Einstellungen",firmware:"Firmware",discoverPrinters:"Drucker entdecken",searching:"Suche...",manualEntry:"Manuelle Eingabe",addFromCloud:"Aus Cloud hinzufügen",toast:{printerDeleted:"Drucker gelöscht",missingSpoolAssignment:"Druck gestartet auf {{printer}}. Fehlende Spulenzuordnung für: {{slots}}",printerAdded:"Drucker hinzugefügt",printerUpdated:"Drucker aktualisiert",failedToDelete:"Drucker konnte nicht gelöscht werden",failedToAdd:"Drucker konnte nicht hinzugefügt werden",connectionFailedNotAdded:"Keine Verbindung zum Drucker möglich. Prüfen Sie IP-Adresse, Seriennummer und Zugangscode und stellen Sie sicher, dass der Nur-LAN-Modus aktiv ist. Der Drucker wurde nicht hinzugefügt.",failedToUpdate:"Drucker konnte nicht aktualisiert werden",commandSent:"Befehl gesendet",failedToSendCommand:"Befehl konnte nicht gesendet werden",turnedOn:"{{name}} eingeschaltet",failedToPowerOn:"{{name}} konnte nicht eingeschaltet werden",scriptTriggered:"Skript ausgelöst",printStopped:"Druck gestoppt",printPaused:"Druck pausiert",printResumed:"Druck fortgesetzt",referenceDeleted:"Referenz gelöscht",detectionAreaSaved:"Erkennungsbereich gespeichert",failedToRunScript:"Skript konnte nicht ausgeführt werden",failedToStopPrint:"Druck konnte nicht gestoppt werden",failedToPausePrint:"Druck konnte nicht pausiert werden",failedToResumePrint:"Druck konnte nicht fortgesetzt werden",failedToControlChamberLight:"Kammerbeleuchtung konnte nicht gesteuert werden",failedToSetSpeed:"Druckgeschwindigkeit konnte nicht eingestellt werden",failedToUpdateSetting:"Einstellung konnte nicht aktualisiert werden",failedToSkipObjects:"Objekte konnten nicht übersprungen werden",failedToRereadRfid:"RFID konnte nicht erneut gelesen werden",failedToCheckPlate:"Platte konnte nicht überprüft werden",failedToUpdateLabel:"Bezeichnung konnte nicht aktualisiert werden",failedToDeleteReference:"Referenz konnte nicht gelöscht werden",failedToSaveDetectionArea:"Erkennungsbereich konnte nicht gespeichert werden",plateCheckEnabled:"Plattenprüfung aktiviert",plateCheckDisabled:"Plattenprüfung deaktiviert",calibrationSaved:"Kalibrierung gespeichert!",calibrationFailed:"Kalibrierung fehlgeschlagen",rfidRereadInitiated:"RFID-Neueinlesen gestartet",loadInitiated:"Filament wird geladen…",unloadInitiated:"Filament wird entladen…",failedToLoad:"Filament konnte nicht geladen werden",failedToUnload:"Filament konnte nicht entladen werden"},connection:{connected:"Verbunden",offline:"Offline"},plateStatus:{markCleared:"Platte als freigegeben markieren",cleared:"Platte freigegeben",notCleared:"Platte nicht freigegeben",inUse:"Platte in Benutzung"},queue:{inQueue:"{{count}} Druck in Warteschlange",inQueue_plural:"{{count}} Drucke in Warteschlange"},controls:"Steuerung",rfid:{reread:"RFID neu lesen"},ams:{load:"Laden",unload:"Entladen"},bedJog:{title:"Druckbett bewegen",bed:"Bett",step:"Schritt (mm)",up:"Platte hoch",down:"Platte runter",disabledWhilePrinting:"Während des Drucks deaktiviert",notHomedTitle:"Drucker ist nicht referenziert",notHomedMessage:"Der Drucker wurde seit dem letzten Druck nicht referenziert. Führen Sie zuerst die automatische Referenzfahrt aus (parkt den Werkzeugkopf und referenziert dann X, Y und Z) oder bewegen Sie trotzdem — die Software-Endschalter werden dabei umgangen.",homeZ:"Automatische Referenzfahrt",moveAnyway:"Trotzdem bewegen",homingStarted:"Drucker wird automatisch referenziert…"},permission:{noAdd:"Sie haben keine Berechtigung, Drucker hinzuzufügen",noEdit:"Sie haben keine Berechtigung, Drucker zu bearbeiten",noDelete:"Sie haben keine Berechtigung, Drucker zu löschen",noControl:"Sie haben keine Berechtigung, Drucker zu steuern",noFiles:"Sie haben keine Berechtigung, auf Druckerdateien zuzugreifen",noAmsRfid:"Sie haben keine Berechtigung, AMS-RFID erneut zu lesen",noSmartPlugControl:"Sie haben keine Berechtigung, Smart Plugs zu steuern",noCamera:"Sie haben keine Berechtigung, Kameras anzuzeigen"},modal:{addTitle:"Drucker hinzufügen",editTitle:"Drucker bearbeiten",myPrinter:"Mein Drucker",selectModel:"Modell auswählen...",locationGroup:"Standort / Gruppe (optional)",locationPlaceholder:"z.B. Werkstatt, Büro, Keller",autoArchiveLabel:"Abgeschlossene Drucke automatisch archivieren",fromPrinterSettings:"Aus Druckereinstellungen",modelOptional:"Modell (optional)",saveChanges:"Änderungen speichern"},skipObjects:{tooltip:"Objekte überspringen",onlyWhilePrinting:"Objekte überspringen (nur während des Drucks)",requiresMultiple:"Objekte überspringen (erfordert 2+ Objekte)",title:"Objekte überspringen",matchIdsInfo:"IDs mit Drucker-Display abgleichen",printerShowsIds:"Der Druckerbildschirm zeigt Objekt-IDs auf der Bauplatte",skipSelected:"Ausgewählte überspringen",skipping:"Überspringe...",noObjectsSelected:"Keine Objekte ausgewählt",selectObjectsToSkip:"Wählen Sie Objekte aus, die Sie vom aktuellen Druck überspringen möchten",skipped:"übersprungen",objectsSkipped:"Objekte übersprungen",activeCount:"{{count}} aktiv",waitForLayer:"Warten Sie auf Schicht 2+ zum Überspringen von Objekten (aktuell Schicht {{layer}})",skip:"Überspringen",confirmTitle:"Objekt überspringen?",confirmMessage:'Möchten Sie "{{name}}" wirklich überspringen? Dies kann nicht rückgängig gemacht werden.'},confirm:{deleteTitle:"Drucker löschen",deleteMessage:'Möchten Sie "{{name}}" wirklich löschen? Alle Verbindungseinstellungen werden entfernt.',deleteArchivesNote:"Der gesamte Druckverlauf für diesen Drucker wird dauerhaft gelöscht.",keepArchivesNote:"Der Druckverlauf wird beibehalten, aber nicht mehr mit diesem Drucker verknüpft.",stopTitle:"Druck stoppen",stopMessage:'Möchten Sie den aktuellen Druck auf "{{name}}" wirklich stoppen? Der Druckauftrag wird abgebrochen.',stopButton:"Druck stoppen",pauseTitle:"Druck pausieren",pauseMessage:'Möchten Sie den aktuellen Druck auf "{{name}}" wirklich pausieren?',pauseButton:"Druck pausieren",resumeTitle:"Druck fortsetzen",resumeMessage:'Möchten Sie den Druck auf "{{name}}" fortsetzen?',resumeButton:"Druck fortsetzen",powerOnTitle:"Drucker einschalten",powerOnMessage:'Möchten Sie die Stromversorgung für "{{name}}" wirklich EINSCHALTEN?',powerOnButton:"Einschalten",powerOffTitle:"Drucker ausschalten",powerOffMessage:'Möchten Sie die Stromversorgung für "{{name}}" wirklich AUSSCHALTEN?',powerOffWarning:'WARNUNG: "{{name}}" druckt gerade! Möchten Sie die Stromversorgung wirklich AUSSCHALTEN? Dies unterbricht den Druck und kann den Drucker beschädigen.',powerOffButton:"Ausschalten",haToggleTitle:'"{{name}}" umschalten',haToggleMessage:"Home-Assistant-Entität {{entity}} umschalten? Das kann die Stromversorgung ausschalten, falls sie gerade an ist.",haToggleWarning:'WARNUNG: "{{name}}" druckt gerade! Umschalten von {{entity}} kann die Stromversorgung trennen und den Druck abbrechen. Fortfahren?',haToggleButton:"Umschalten"},bulk:{select:"Auswählen",selectAll:"Alle auswählen",selectByLocation:"Nach Standort auswählen",selected:"{{count}} ausgewählt",actions:{stop:"Stoppen",pause:"Pausieren",resume:"Fortsetzen",clearPlate:"Druckbett leeren",clearHMS:"Benachrichtigungen löschen"},confirm:{stopTitle:"{{count}} Drucke stoppen",stopMessage:"Dies wird aktive Drucke auf {{count}} Drucker(n) abbrechen. Diese Aktion kann nicht rückgängig gemacht werden.",stopButton:"Alle stoppen",pauseTitle:"{{count}} Drucke pausieren",pauseMessage:"Dies wird aktive Drucke auf {{count}} Drucker(n) pausieren.",pauseButton:"Alle pausieren",clearPlateTitle:"{{count}} Druckbetten leeren",clearPlateMessage:"Dies wird das Druckbett auf {{count}} Drucker(n) leeren und kann wartende Aufträge starten.",clearPlateButton:"Alle leeren"},success:"{{action}} auf {{count}} Drucker(n) abgeschlossen",partial:"{{succeeded}} erfolgreich, {{failed}} fehlgeschlagen",noneApplicable:"Keine ausgewählten Drucker sind im richtigen Zustand für diese Aktion",selectByState:"Nach Status auswählen"},discovery:{title:"Drucker entdecken",searching:"Suche...",scanning:"Scanne...",scanProgress:"Scanne... {{scanned}}/{{total}}",foundPrinters:"{{count}} Drucker gefunden",noPrintersFound:"Keine Drucker gefunden",noPrintersFoundSubnet:"Keine Drucker im angegebenen Subnetz gefunden.",noPrintersFoundNetwork:"Keine Drucker im Netzwerk gefunden.",allConfigured:"Alle erkannten Drucker sind bereits konfiguriert.",alreadyAdded:"Bereits hinzugefügt",select:"Auswählen",manualEntry:"Manuelle Eingabe",addFromCloud:"Aus Cloud hinzufügen",subnetToScan:"Zu scannendes Subnetz",dockerNote:"Docker erkannt. Geben Sie das Subnetz Ihres Druckers in CIDR-Notation ein. Erfordert network_mode: host in docker-compose.yml.",scanSubnet:"Subnetz nach Druckern scannen",discoverNetwork:"Drucker im Netzwerk suchen",scanningSubnet:"Subnetz wird nach Bambu-Druckern gescannt...",scanningNetwork:"Netzwerk wird gescannt...",serialRequired:"Seriennummer erforderlich",unknown:"Unbekannt",failedToStart:"Erkennung konnte nicht gestartet werden",customSubnetOption:"Eigenes Subnetz...",customSubnetLabel:"Eigenes Subnetz (CIDR)",customSubnetNote:"Wähle ein eigenes Subnetz, wenn dein Drucker in einem anderen Netzwerk als dieser Server steht. Die Ports FTP (990) und MQTT (8883) müssen über die Routinggrenze erreichbar sein."},drying:{start:"Trocknung starten",stop:"Trocknung stoppen",temperature:"Temperatur",duration:"Dauer",hours:"Stunden",timeRemaining:"{{time}} verbleibend",active:"Trocknung",notSupported:"Trocknung nicht unterstützt",powerRequired:"AMS-Netzteil anschließen, um Trocknung zu aktivieren",startingDrying:"Trocknung wird gestartet...",stoppingDrying:"Trocknung wird gestoppt...",rotateTray:"Spule während der Trocknung drehen"},filaments:"Filamente",openCameraOverlay:"Kamera-Overlay öffnen",openCameraWindow:"Kamera in neuem Fenster öffnen",firmwareUpdateAvailable:"Firmware-Update verfügbar: {{current}} → {{latest}}",firmwareUpToDate:"Firmware {{version}} — Aktuell",firmwareUpdateButton:"Aktualisieren",plateDetection:{noPermission:"Sie haben keine Berechtigung, Drucker zu aktualisieren",enabledClick:"Plattenprüfung aktiviert - Klicken zum Deaktivieren",disabledClick:"Plattenprüfung deaktiviert - Klicken zum Aktivieren",manageCalibration:"Platten-Erkennungskalibrierung verwalten",calibrationRequired:"Kalibrierung erforderlich",calibrationInstructions:"Bitte stellen Sie sicher, dass die Druckplatte <strong>vollständig leer</strong> ist, und klicken Sie dann auf Kalibrieren.",calibrationDescription:"Die Kalibrierung erfasst ein Referenzbild der leeren Platte. Zukünftige Prüfungen vergleichen mit dieser Referenz, um Objekte zu erkennen.",calibrationTip:"<strong>Tipp:</strong> Sie können bis zu 5 Kalibrierungen für verschiedene Platten speichern. Das System verwendet automatisch die beste Übereinstimmung bei der Prüfung.",plateEmpty:"Platte erscheint leer",objectsDetected:"Objekte auf Platte erkannt",confidence:"Konfidenz",difference:"Differenz",analysisPreview:"Analysevorschau:",analysisLegend:"Grüner Rahmen = Erkennungsbereich, Rote Überlagerung = Unterschiede zur Kalibrierung",savedReferences:"Gespeicherte Referenzen ({{count}}/{{max}})",deleteReference:"Referenz löschen",labelPlaceholder:"Bezeichnung...",clickToEdit:"{{label}} - Zum Bearbeiten klicken",clickToAddLabel:"Zum Hinzufügen einer Bezeichnung klicken"},speed:{title:"Druckgeschwindigkeit",silent:"Leise (50%)",standard:"Standard (100%)",sport:"Sport (124%)",ludicrous:"Ludicrous (166%)"},airduct:{title:"Luftkanal-Modus",cooling:"Kühlen",heating:"Heizen"},noSdCard:"Keine SD",door:{open:"Offen",closed:"Zu"},fans:{partCooling:"Bauteilkühlung",auxiliary:"Hilfsventilator",chamber:"Kammerventilator"},clickToViewHmsErrors:"Klicken, um HMS-Fehler anzuzeigen",estimatedCompletion:"Geschätzte Fertigstellungszeit",plateNumber:"Platte {{number}}",slotOptions:"Slot-Optionen",amsPopup:{friendlyName:"AMS-Name",friendlyNamePlaceholder:"z. B. AMS-Anzeigename",serialNumber:"Seriennummer",firmwareVersion:"Firmware",save:"Speichern",clear:"Löschen",noEditPermission:"Sie haben keine Berechtigung, AMS-Einheiten umzubenennen"},firmwareModal:{title:"Firmware-Update",titleUpToDate:"Firmware-Info",currentVersion:"Aktuell:",latestVersion:"Neueste:",releaseNotes:"Versionshinweise",checkingPrereqs:"Prüfe Voraussetzungen...",sdCardReady:"SD-Karte bereit. Klicken Sie unten, um die Firmware hochzuladen.",uploadedSuccess:"Firmware auf SD-Karte hochgeladen!",applyInstructions:"So wenden Sie das Update auf Ihrem Drucker an:",step1:"Gehen Sie auf dem Touchscreen des Druckers zu <strong>Einstellungen</strong>",step2:"Navigieren Sie zu <strong>Firmware</strong>",step3:"Wählen Sie <strong>Update von SD-Karte</strong>",step4:"Das Update dauert 10-20 Minuten",done:"Fertig",starting:"Starte...",uploadFirmware:"Firmware hochladen",uploadFailed:"Upload fehlgeschlagen: {{error}}",uploadedToast:"Firmware hochgeladen! Starten Sie das Update vom Druckerbildschirm.",availableVersions:"Verfügbare Versionen",usable:"Installierbar",unavailable:"Nicht verfügbar",installed:"Installiert",newerBadge:"neuer",olderBadge:"älter",currentBadge:"aktuell"},accessCodePlaceholder:"Leer lassen, um den aktuellen zu behalten",roi:{title:"Erkennungsbereich (ROI)",xStart:"X-Start",yStart:"Y-Start",width:"Breite",height:"Höhe",instruction:"Passen Sie den Erkennungsbereich an, um sich auf die Druckplatte zu konzentrieren. Der grüne Rahmen in der Vorschau zeigt den aktuellen Bereich."},developerModeWarning:"Der Entwickler-LAN-Modus ist nicht aktiviert auf: {{names}}. Einige Funktionen funktionieren möglicherweise nicht.",howToEnable:"Aktivieren",incompatibleFile:"Diese Datei wurde für {{slicedFor}} geslicet, aber dieser Drucker ist ein {{printerModel}}",dropNotPrintable:"Nur .gcode- und .gcode.3mf-Dateien können gedruckt werden",dropToPrint:"Zum Drucken ablegen",cannotPrint:"Drucker beschäftigt"},archives:{title:"Druckarchiv",searchPlaceholder:"Archiv durchsuchen...",filterByPrinter:"Nach Drucker filtern",filterByStatus:"Nach Status filtern",sortBy:"Sortieren nach",sortNewest:"Neueste zuerst",sortOldest:"Älteste zuerst",sortName:"Name",sortDuration:"Dauer",sortLargest:"Größte zuerst",sortSmallest:"Kleinste zuerst",sortSize:"Größe",noArchives:"Keine Archive gefunden",noArchivesSearch:"Keine Archive entsprechen Ihrer Suche",originalPrintNotVisible:"Ursprünglicher Druck nicht sichtbar - versuchen Sie, die Filter zu löschen",noArchivesYet:"Noch keine Archive",prints:"Drucke",pagination:{showing:"Zeige",to:"bis",of:"von",show:"Zeige",page:"Seite",all:"Alle"},loadingArchives:"Lade Archive...",releaseToUpload:"Loslassen zum Hochladen",showAll:"Alle anzeigen",showFavoritesOnly:"Nur Favoriten anzeigen",gridView:"Rasteransicht",listView:"Listenansicht",calendarView:"Kalenderansicht",logView:"Druckprotokoll",manageTags:"Tags verwalten",showFailedPrints:"Fehlgeschlagene Drucke anzeigen",hideFailedPrints:"Fehlgeschlagene Drucke ausblenden",hideDuplicates:"Duplikate ausblenden",viewOriginalPrint:"Klicken, um den ursprünglichen Druck anzuzeigen (#{{id}})",printTime:"Druckzeit",filamentUsed:"Verbrauchtes Filament",cost:"Kosten",reprint:"Drucken",preview:"Vorschau",deleteArchive:"Archiv löschen",deleteConfirm:"Möchten Sie dieses Archiv wirklich löschen?",favorite:"Favorit",unfavorite:"Aus Favoriten entfernen",viewDetails:"Details anzeigen",status:{completed:"Abgeschlossen",failed:"Fehlgeschlagen",stopped:"Gestoppt"},toast:{source3mfAttached:"Quell-3MF angehängt: {{filename}}",failedUploadSource3mf:"Fehler beim Hochladen der Quell-3MF",source3mfRemoved:"Quell-3MF entfernt",failedRemoveSource3mf:"Fehler beim Entfernen der Quell-3MF",f3dAttached:"F3D angehängt: {{filename}}",failedUploadF3d:"Fehler beim Hochladen der F3D",f3dRemoved:"F3D entfernt",failedRemoveF3d:"Fehler beim Entfernen der F3D",timelapseAttached:"Zeitraffer angehängt: {{filename}}",timelapseAlreadyAttached:"Zeitraffer bereits angehängt",noMatchingTimelapse:"Kein passender Zeitraffer gefunden",failedScanTimelapse:"Fehler beim Suchen nach Zeitraffer",failedAttachTimelapse:"Fehler beim Anhängen des Zeitraffers",timelapseRemoved:"Zeitraffer entfernt",failedRemoveTimelapse:"Fehler beim Entfernen des Zeitraffers",timelapseUploaded:"Zeitraffer hochgeladen: {{filename}}",failedUploadTimelapse:"Fehler beim Hochladen des Zeitraffers",archiveDeleted:"Archiv gelöscht",failedDeleteArchive:"Fehler beim Löschen des Archivs",addedToFavorites:"Zu Favoriten hinzugefügt",removedFromFavorites:"Aus Favoriten entfernt",projectUpdated:"Projekt aktualisiert",failedUpdateProject:"Fehler beim Aktualisieren des Projekts",linkCopied:"Link in die Zwischenablage kopiert",failedCopyLink:"Fehler beim Kopieren des Links",photoDeleted:"Foto gelöscht",failedDeletePhoto:"Fehler beim Löschen des Fotos",failedDeleteArchives:"Fehler beim Löschen der Archive",failedUpdateFavorites:"Fehler beim Aktualisieren der Favoriten",exportDownloaded:"Export heruntergeladen",exportFailed:"Export fehlgeschlagen"},menu:{print:"Drucken",schedule:"Planen",openInBambuStudio:"Im Slicer öffnen",slice:"Slicen",externalLink:"Externer Link",viewOnMakerWorld:"Auf MakerWorld ansehen",preview3d:"3D-Vorschau",viewTimelapse:"Zeitraffer ansehen",scanForTimelapse:"Nach Zeitraffer suchen",uploadTimelapse:"Zeitraffer hochladen",removeTimelapse:"Zeitraffer entfernen",downloadSource3mf:"Quell-3MF herunterladen",uploadSource3mf:"Quell-3MF hochladen",replaceSource3mf:"Quell-3MF ersetzen",removeSource3mf:"Quell-3MF entfernen",uploadF3d:"F3D hochladen",replaceF3d:"F3D ersetzen",downloadF3d:"F3D herunterladen",removeF3d:"F3D entfernen",download:"Herunterladen",copyDownloadLink:"Download-Link kopieren",qrCode:"QR-Code",viewPhotos:"Fotos ansehen",viewPhotosCount:"Fotos ansehen ({{count}})",projectPage:"Projektseite",addToFavorites:"Zu Favoriten hinzufügen",removeFromFavorites:"Aus Favoriten entfernen",edit:"Bearbeiten",printLog:"Druckprotokoll",goToProject:"Zum Projekt: {{name}}",addToProject:"Zu Projekt hinzufügen",removeFromProject:"Aus Projekt entfernen",loading:"Laden...",noProjectsAvailable:"Keine Projekte verfügbar",searchProjects:"Projekte suchen…",select:"Auswählen",deselect:"Abwählen",delete:"Löschen"},permission:{noReprint:"Sie haben keine Berechtigung, dieses Archiv erneut zu drucken",noAddToQueue:"Sie haben keine Berechtigung, zur Warteschlange hinzuzufügen",noUpdateArchives:"Sie haben keine Berechtigung, Archive zu aktualisieren",noUploadFiles:"Sie haben keine Berechtigung, Dateien hochzuladen",noDownload:"Sie haben keine Berechtigung, Archive herunterzuladen",noCopyLink:"Sie haben keine Berechtigung, Download-Links zu kopieren",noDelete:"Sie haben keine Berechtigung, dieses Archiv zu löschen",noCreate:"Sie haben keine Berechtigung, Archive zu erstellen"},platePicker:{title:"Platte zur Vorschau auswählen",hint:"Dieses Archiv enthält mehrere Platten. Wähle eine, um sie im GCode-Viewer zu öffnen.",plateLabel:"Platte {{index}}",objectCount:"{{count}} Objekt",objectCount_plural:"{{count}} Objekte",noGcode:"Dieses Archiv enthält keinen geschnittenen G-Code zur Vorschau. Öffne es zuerst in Bambu Studio zum Slicen."},card:{previousPlate:"Vorherige Platte",nextPlate:"Nächste Platte",plateNumber:"Platte {{index}}",moreOptions:"Rechtsklick für mehr Optionen",addToFavorites:"Zu Favoriten hinzufügen",removeFromFavorites:"Aus Favoriten entfernen",cancelled:"abgebrochen",failed:"fehlgeschlagen",duplicate:"Duplikat",duplicateTitle:"Dieses Modell wurde bereits zuvor gedruckt",openSource3mf:"Quell-3MF in Bambu Studio öffnen (Rechtsklick für mehr Optionen)",downloadF3d:"Fusion 360 Designdatei herunterladen",viewTimelapse:"Zeitraffer ansehen",viewPhoto:"1 Foto ansehen",viewPhotos:"{{count}} Fotos ansehen",openFolder:"Ordner öffnen: {{name}}",slicedFile:"Geslicte Datei - druckbereit",sourceFile:"Nur Quelldatei - keine AMS-Zuordnung verfügbar",gcode:"GCODE",source:"QUELLE",project:"Projekt: {{name}}",runsBadge:"{{count}} Drucke",runsBadgeTitle:"Insgesamt {{count}} Drucke — {{successful}} erfolgreich, {{failed}} fehlgeschlagen. Klicken, um das vollständige Druckprotokoll zu öffnen.",estimated:"Geschätzt: {{time}}",actual:"Tatsächlich: {{time}}",accuracy:"Genauigkeit: {{percent}}%",filament:"{{weight}} g",layer:"{{count}} Schicht",layers:"{{count}} Schichten",object:"{{count}} Objekt",objects:"{{count}} Objekte",slicedFor:"Geslict für {{model}}",uploadedBy:"Hochgeladen von",noPermissionReprint:"Sie haben keine Berechtigung, erneut zu drucken",noFileForReprint:"Keine 3MF-Datei verfügbar — die Datei konnte beim Aufzeichnen des Drucks nicht vom Drucker heruntergeladen werden",noPermissionEdit:"Sie haben keine Berechtigung, Archive zu bearbeiten",noPermissionDelete:"Sie haben keine Berechtigung, Archive zu löschen",reprint:"Drucken",schedulePrint:"Druck planen",schedule:"Planen",openInBambuStudio:"Im Slicer öffnen",openInBambuStudioToSlice:"Im Slicer öffnen zum Slicen",slice:"Slicen",externalLink:"Externer Link",makerWorld:"MakerWorld – {{designer}}",viewProject:"Projekt ansehen",noExternalLink:"Kein externer Link",preview3d:"3D-Vorschau",download:"Herunterladen",edit:"Bearbeiten",delete:"Löschen"},runLog:{title:"Druckprotokoll",modalTitle:"Druckprotokoll — {{name}}",modalTitleFallback:"dieses Archiv",empty:"Für dieses Archiv wurden noch keine Druckereignisse aufgezeichnet.",col:{date:"Datum",status:"Status",duration:"Dauer",filament:"Filament",cost:"Kosten"},status:{completed:"Abgeschlossen",failed:"Fehlgeschlagen",cancelled:"Abgebrochen",stopped:"Gestoppt",skipped:"Übersprungen",printing:"Druckt"}},modal:{deleteArchive:"Archiv löschen",deleteConfirm:'Möchten Sie "{{name}}" wirklich löschen? Diese Aktion kann nicht rückgängig gemacht werden.',deleteButton:"Löschen",deletePurgeStats:"Diesen Druck auch aus den Quick Stats entfernen (Filament, Zeit, Kosten, Energie)",removeSource3mf:"Quell-3MF entfernen",removeSource3mfConfirm:'Möchten Sie die Quell-3MF-Datei wirklich von "{{name}}" entfernen? Die ursprüngliche Slicer-Projektdatei wird gelöscht.',removeButton:"Entfernen",removeF3d:"F3D entfernen",removeF3dConfirm:'Möchten Sie die Fusion 360 Designdatei wirklich von "{{name}}" entfernen?',removeTimelapse:"Zeitraffer entfernen",removeTimelapseConfirm:'Möchten Sie das Zeitraffervideo wirklich von "{{name}}" entfernen?',timelapse:"{{name}} - Zeitraffer",selectTimelapse:"Zeitraffer auswählen",selectTimelapseDesc:"Keine automatische Übereinstimmung gefunden. Wählen Sie den Zeitraffer für diesen Druck:",deleteArchives:"Archive löschen",deleteArchivesConfirm:"Möchten Sie wirklich {{count}} Archiv(e) löschen? Diese Aktion kann nicht rückgängig gemacht werden.",deleteCount:"{{count}} löschen"},page:{title:"Archive",printsCount:"{{filtered}} von {{total}} Drucken",dropFilesHere:".3mf-Dateien hier ablegen",releaseToUpload:"Loslassen zum Hochladen",only3mfSupported:"Nur .3mf-Dateien werden unterstützt",close:"Schließen",selected:"{{count}} ausgewählt",selectAll:"Alle auswählen",tags:"Tags",project:"Projekt",favorite:"Favorit",delete:"Löschen",toggledFavorites:"Favoriten für {{count}} Archiv(e) umgeschaltet",failedUpdateFavorites:"Fehler beim Aktualisieren der Favoriten",archivesDeleted:"{{count}} Archiv(e) gelöscht",failedDeleteArchives:"Fehler beim Löschen der Archive",photoDeleted:"Foto gelöscht",failedDeletePhoto:"Fehler beim Löschen des Fotos"},list:{name:"Name",printer:"Drucker",date:"Datum",size:"Größe",actions:"Aktionen",hasTimelapse:"Hat Zeitraffer"},log:{date:"Datum",printName:"Druckname",printer:"Drucker",user:"Benutzer",status:"Status",duration:"Dauer",filament:"Filament",allPrinters:"Alle Drucker",allUsers:"Alle Benutzer",allStatuses:"Alle Status",cancelled:"Abgebrochen",skipped:"Übersprungen",dateFrom:"Von",dateTo:"Bis",noEntries:"Keine Druckprotokolleinträge gefunden",showing:"{{count}} von {{total}} Einträgen",rowsPerPage:"Zeilen",page:"Seite",prev:"Zurück",next:"Weiter",clearLog:"Protokoll löschen",clearLogTitle:"Druckprotokoll löschen",clearLogConfirm:"Alle Druckprotokolleinträge werden dauerhaft gelöscht. Archive und Warteschlangeneinträge sind nicht betroffen. Diese Aktion kann nicht rückgängig gemacht werden. Sind Sie sicher?",clearLogButton:"Alle löschen",cleared:"{{count}} Protokolleinträge gelöscht",clearFailed:"Druckprotokoll konnte nicht gelöscht werden"}},queue:{filamentShort:{rowBadge:"Filament fuer die zugewiesene Spule reicht nicht",rowTooltip:"Der Dispatcher hat diese Position markiert. Klicke auf Play, um den Pro-Slot-Fehlbestand zu sehen und zu entscheiden, ob trotzdem gedruckt werden soll.",confirmTitle:"Filament reicht nicht",confirmIntro:"Die zugewiesene Spule kann mindestens einen Slot nicht versorgen. Trotzdem drucken?",lineItem:"Slot {{slot}}: benoetigt {{required}} g, {{remaining}} g verbleibend",unknown:"unbekannt",printAnyway:"Trotzdem drucken"},title:"Druckwarteschlange",subtitle:"Planen und verwalten Sie Ihre Druckaufträge",addToQueue:"Zur Warteschlange hinzufügen",print:"Drucken",reprint:"Erneut drucken",schedulePrint:"Druck planen",editQueueItem:"Warteschlangeneintrag bearbeiten",printToPrinters:"Auf {{count}} Druckern drucken",queueToPrinters:"Zu {{count}} Druckern hinzufügen",queueSelectedPlates:"{{count}} Platten in die Warteschlange",selectAllPlates:"Alle {{count}} Platten auswählen",deselectAll:"Alle abwählen",printQueued:"Druck in Warteschlange",itemsQueued:"{{count}} Einträge in Warteschlange",sending:"Wird gesendet...",sendingProgress:"Sende {{current}}/{{total}}...",adding:"Wird hinzugefügt...",addingProgress:"Füge hinzu {{current}}/{{total}}...",savingProgress:"Speichere {{current}}/{{total}}...",clearQueue:"Warteschlange leeren",clearHistory:"Verlauf löschen",emptyQueue:"Warteschlange ist leer",position:"Position",scheduledTime:"Geplante Zeit",moveUp:"Nach oben",moveDown:"Nach unten",startNow:"Jetzt starten",printingInProgress:"Druck läuft...",viewArchive:"Archiv anzeigen",viewInFileManager:"Im Dateimanager anzeigen",itemCount:"{{count}} Element",itemCount_plural:"{{count}} Elemente",dragToReorder:"Ziehen zum Neuordnen (nur Sofort)",reorderHint:"Position betrifft nur Sofort-Elemente. Geplante Elemente werden zur festgelegten Zeit ausgeführt.",sjf:{label:"SJF",tooltip:"Kürzester Auftrag zuerst — Scheduler bevorzugt kürzere Drucke"},addedBy:"Hinzugefügt von {{name}}",nextInQueue:"Nächster in der Warteschlange",clearPlateSuccess:"Druckplatte freigegeben — bereit für nächsten Druck",plateNumber:"Platte {{index}}",quantity:"Menge",quantityHint:"Erstellt {{count}} Warteschlangeneinträge",activeBatches:"Aktive Stapel",batchProgress:"{{completed}} von {{total}} abgeschlossen",cancelBatch:"Verbleibende abbrechen",batchCancelled:"Verbleibende Stapeleinträge abgebrochen",cancelBatchConfirmTitle:"Stapel abbrechen",cancelBatchConfirmMessage:"Alle verbleibenden ausstehenden Einträge in diesem Stapel abbrechen?",batch:"Stapel",sections:{currentlyPrinting:"Aktuell druckend",queued:"In Warteschlange",history:"Verlauf"},status:{pending:"Ausstehend",waiting:"Wartend",printing:"Druckt",paused:"Pausiert",completed:"Abgeschlossen",failed:"Fehlgeschlagen",skipped:"Übersprungen",cancelled:"Abgebrochen"},summary:{printing:"Druckt",queued:"In Warteschlange",totalTime:"Gesamte Wartezeit",totalWeight:"Gesamtgewicht der Warteschlange",history:"Verlauf"},filter:{allPrinters:"Alle Drucker",unassigned:"Nicht zugewiesen",allStatus:"Alle Status",allLocations:"Alle Standorte",any:"Beliebig"},sort:{byPosition:"Nach Position sortieren",byName:"Nach Name sortieren",byPrinter:"Nach Drucker sortieren",bySchedule:"Nach Zeitplan sortieren",byDate:"Nach Datum sortieren",ascendingOldest:"Aufsteigend (älteste zuerst)",descendingNewest:"Absteigend (neueste zuerst)"},badges:{staged:"Bereitgestellt",requiresPrevious:"Erfordert vorherigen Erfolg",autoPowerOff:"Automatisch ausschalten",gcodeInjection:"G-Code"},empty:{title:"Keine Drucke geplant",description:'Planen Sie einen Druck von der Archivseite über die Option "Planen" im Kontextmenü oder ziehen Sie Dateien hierher.'},time:{asap:"Sofort",overdue:"Überfällig",now:"Jetzt",lessThanMinute:"In weniger als einer Minute",inMinutes:"In {{count}} Min",inHours:"In {{count}} Stunden"},actions:{stopPrint:"Druck stoppen",startPrint:"Druck starten",requeue:"Erneut einreihen"},bulkEdit:{title:"{{count}} Element bearbeiten",title_plural:"{{count}} Elemente bearbeiten",description:"Nur geänderte Einstellungen werden auf ausgewählte Elemente angewendet.",printer:"Drucker",noChange:"— Keine Änderung —",queueOptions:"Warteschlangenoptionen",staged:"Bereitgestellt (manueller Start)",autoPowerOff:"Nach Druck automatisch ausschalten",requirePrevious:"Vorherigen Erfolg erfordern",printOptions:"Druckoptionen",bedLevelling:"Bett-Nivellierung",flowCalibration:"Fluss-Kalibrierung",vibrationCalibration:"Vibrations-Kalibrierung",layerInspection:"Erste-Schicht-Prüfung",timelapse:"Zeitraffer",useAms:"AMS verwenden",applyChanges:"Änderungen übernehmen",selectAll:"Alle auswählen",deselectAll:"Auswahl aufheben",selected:"{{count}} ausgewählt",editSelected:"Ausgewählte bearbeiten",cancelSelected:"Ausgewählte abbrechen"},confirm:{cancelTitle:"Geplanten Druck abbrechen",cancelMessage:'Möchten Sie "{{name}}" wirklich abbrechen?',stopTitle:"Druck stoppen",stopMessage:'Möchten Sie den aktuellen Druck "{{name}}" wirklich stoppen? Der Druckauftrag wird am Drucker abgebrochen.',removeTitle:"Aus Verlauf entfernen",removeMessage:'Möchten Sie "{{name}}" wirklich aus dem Warteschlangenverlauf entfernen?',clearHistoryTitle:"Verlauf löschen",clearHistoryMessage:"Möchten Sie alle {{count}} Element(e) aus dem Verlauf entfernen?",cancelButton:"Druck abbrechen",stopButton:"Druck stoppen",thisPrint:"diesen Druck",thisItem:"dieses Element"},toast:{cancelled:"Warteschlangenelement abgebrochen",cancelFailed:"Element konnte nicht abgebrochen werden",removed:"Warteschlangenelement entfernt",removeFailed:"Element konnte nicht entfernt werden",stopped:"Druck gestoppt",stopFailed:"Druck konnte nicht gestoppt werden",released:"Druck in Warteschlange freigegeben",startFailed:"Druck konnte nicht gestartet werden",reorderFailed:"Warteschlange konnte nicht neu geordnet werden",historyCleared:"{{count}} Verlaufselement(e) gelöscht",clearHistoryFailed:"Verlauf konnte nicht gelöscht werden",updateFailed:"Elemente konnten nicht aktualisiert werden",bulkCancelled:"{{count}} Element(e) abgebrochen",bulkCancelFailed:"Elemente konnten nicht abgebrochen werden"},timeline:{listView:"Liste",timelineView:"Zeitstrahl",unassigned:"Nicht zugewiesen",noData:"Keine geplanten Drucke für diesen Tag",allDoneBy:"Alle Drucke voraussichtlich fertig um {{time}}",staged:"Bereitgestellt",filterAll:"Alle anzeigen",filterPrinting:"Druckend",filterQueued:"Warteschlange",time:{anyMoment:"jeden Moment",minutesLeft:"{{minutes}}m übrig",hoursLeft:"{{hours}}h übrig",hoursMinutesLeft:"{{hours}}h {{minutes}}m übrig"},day:{previous:"Vorheriger Tag",next:"Nächster Tag",today:"Heute"}},permissions:{noStopPrint:"Sie haben keine Berechtigung, Drucke zu stoppen",noStartPrint:"Sie haben keine Berechtigung, Drucke zu starten",noEdit:"Sie haben keine Berechtigung, dieses Warteschlangenelement zu bearbeiten",noCancel:"Sie haben keine Berechtigung, dieses Warteschlangenelement abzubrechen",noRequeue:"Sie haben keine Berechtigung, Elemente erneut einzureihen",noRemove:"Sie haben keine Berechtigung, dieses Warteschlangenelement zu entfernen",noClearHistory:"Sie haben keine Berechtigung, den gesamten Verlauf zu löschen",noEditItems:"Sie haben keine Berechtigung, Warteschlangenelemente zu bearbeiten",noCancelItems:"Sie haben keine Berechtigung, Warteschlangenelemente abzubrechen"}},backgroundDispatch:{unknownFile:"Unbekannte Datei",unknownPrinter:"Unbekannter Drucker",startingPrints:"Starte Drucke",progressSummary:"{{complete}}/{{total}} abgeschlossen • Geplant: {{dispatched}} • In Bearbeitung: {{processing}}",expandDetails:"Dispatch-Details ausklappen",collapseDetails:"Dispatch-Details einklappen",dismissToast:"Dispatch-Hinweis schließen",cancelDispatchJob:"Dispatch-Job abbrechen",cancel:"Abbrechen",cancelling:"Wird abgebrochen…",awaitingPrinter:"Warte auf Drucker…",status:{dispatched:"Geplant",processing:"In Bearbeitung",completed:"Abgeschlossen",failed:"Fehlgeschlagen",cancelled:"Abgebrochen"},toast:{cancellingUpload:"Upload wird abgebrochen...",cancelled:"Dispatch abgebrochen",cancelFailed:"Dispatch konnte nicht abgebrochen werden",completeWithFailures:"Background Dispatch abgeschlossen: {{completed}} erfolgreich, {{failed}} fehlgeschlagen",completeSuccess:"Background Dispatch abgeschlossen: {{completed}} erfolgreich",printStartedRemaining:"{{completed}} Druck(e) gestartet, {{remaining}} weitere werden gesendet..."}},stats:{title:"Statistiken",subtitle:"Widgets zum Neuanordnen ziehen. Auf das Augensymbol klicken zum Ausblenden.",overview:"Übersicht",totalPrints:"Gesamtdrucke",successRate:"Erfolgsrate",totalPrintTime:"Gesamtdruckzeit",printTime:"Druckzeit",totalFilament:"Gesamtverbrauch Filament",filamentUsed:"Filamentverbrauch",filamentCost:"Filamentkosten",totalCost:"Gesamtkosten",energyUsed:"Energieverbrauch",energyCost:"Energiekosten",energyWarmingUpTooltip:"Die Energieerfassung sammelt noch stündliche Snapshots. Zeitraumwerte werden genau, sobald vor dem gewählten Bereich mindestens ein Snapshot vorliegt. Frühe Werte können zu niedrig sein.",averagePrintTime:"Durchschnittliche Druckzeit",printsPerDay:"Drucke pro Tag",byPrinter:"Nach Drucker",printsByPrinter:"Drucke nach Drucker",byMaterial:"Nach Material",byMonth:"Nach Monat",last7Days:"Letzte 7 Tage",last30Days:"Letzte 30 Tage",last90Days:"Letzte 90 Tage",allTime:"Gesamt",quickStats:"Schnellstatistiken",printActivity:"Druckaktivität",filamentTypes:"Filamenttypen",filamentTrends:"Filamenttrends",failureAnalysis:"Fehleranalyse",timeAccuracy:"Zeitgenauigkeit",successful:"Erfolgreich:",failed:"Fehlgeschlagen:",cancelled:"Abgebrochen:",perfectEstimate:"100% = perfekte Schätzung",noTimeAccuracyData:"Noch keine Zeitgenauigkeitsdaten",noFilamentData:"Keine Filamentdaten verfügbar",noPrinterData:"Keine Druckerdaten verfügbar",noPrintData:"Keine Druckdaten verfügbar",noPrintDataLast30Days:"Keine Druckdaten in den letzten 30 Tagen",failureReasons:"Fehlerursachen",topFailureReasons:"Häufigste Fehlerursachen",failedPrintsCount:"{{failed}} / {{total}} Drucke fehlgeschlagen",lastWeekRate:"Letzte Woche: {{rate}}%",resetLayout:"Layout zurücksetzen",recalculateCosts:"Kosten neu berechnen",recalculateCostsHint:"Alle Archivkosten mit aktuellen Filamentpreisen neu berechnen",exportStats:"Statistiken exportieren",exportAsCsv:"Als CSV exportieren",exportAsExcel:"Als Excel exportieren",hiddenCount:"{{count}} ausgeblendet",exportDownloaded:"Export heruntergeladen",exportFailed:"Export fehlgeschlagen",layoutReset:"Layout zurückgesetzt",recalculatedCosts:"Kosten für {{count}} Archive neu berechnet",recalculateFailed:"Kosten konnten nicht neu berechnet werden",loadingStats:"Statistiken werden geladen...",noPermissionResetLayout:"Sie haben keine Berechtigung, das Layout zurückzusetzen",noPermissionRecalculate:"Sie haben keine Berechtigung, Kosten neu zu berechnen",noPrintDataInRange:"Keine Druckdaten im ausgewählten Zeitraum",periodFilament:"Filamentverbrauch",periodCost:"Kosten",avgPerPrint:"Durchschnitt pro Druck",usageOverTime:"Verbrauch im Zeitverlauf",filamentByWeight:"Gewicht",printDuration:"Druckdauer",printerUtilization:"Druckerauslastung",filamentSuccess:"Erfolg nach Material",printHabits:"Druckgewohnheiten",printTimeOfDay:"Druck-Tageszeit",colorDistribution:"Farbverteilung",noColorData:"Keine Farbdaten verfügbar",records:"Rekorde",longestPrint:"Längster Druck",heaviestPrint:"Schwerster Druck",mostExpensivePrint:"Teuerster Druck",busiestDay:"Aktivster Tag",successStreak:"Erfolgsserie",streakPrint:"aufeinanderfolgender Druck",streakPrints:"{{count}} aufeinanderfolgende Drucke",printerStats:"Druckerstatistiken",hours:"Stunden",avgPrints:"Ø Drucke",noArchiveData:"Keine Druckdaten verfügbar",filamentByTime:"Zeitverlauf",avgWeight:"Ø Gewicht",avgTime:"Ø Zeit",filamentByPrints:"Drucke",timeframe:{today:"Heute","this-week":"Diese Woche","this-month":"Dieser Monat","last-7":"Letzte 7 Tage","last-30":"Letzte 30 Tage","last-90":"Letzte 90 Tage","this-year":"Dieses Jahr","all-time":"Gesamt",custom:"Benutzerdefiniert",from:"Von",to:"Bis"},allUsers:"Alle Benutzer",noUser:"Kein Benutzer (System)",filterByUser:"Nach Benutzer filtern"},maintenance:{title:"Wartung",overview:"Übersicht",allOk:"Alle Wartungen aktuell",dueCount:"{{count}} Aufgabe fällig",dueCount_plural:"{{count}} Aufgaben fällig",warningCount:"{{count}} Warnung",warningCount_plural:"{{count}} Warnungen",totalPrintTime:"Gesamtdruckzeit",nextMaintenance:"Nächste Wartung",nothingDue:"Nichts fällig",tasks:"Aufgaben",lastPerformed:"Zuletzt durchgeführt",interval:"Intervall",hoursRemaining:"{{hours}}h verbleibend",hoursOverdue:"{{hours}}h überfällig",markDone:"Als erledigt markieren",performMaintenance:"Wartung durchführen",history:"Verlauf",noHistory:"Kein Wartungsverlauf",editPrintHours:"Druckstunden bearbeiten",currentHours:"Aktuelle Stunden",statusTab:"Status",settingsTab:"Einstellungen",overdueCount:"{{count}} überfällig",dueSoonCount:"{{count}} bald fällig",dueSoon:"Bald fällig",allGood:"Alles in Ordnung",overdueBy:"Überfällig um {{duration}}",dueIn:"Fällig in {{duration}}",timeLeft:"{{duration}} verbleibend",day:"1 Tag",days:"{{count}} Tage",week:"1 Woche",weeks:"{{count}} Wochen",month:"1 Monat",months:"{{count}} Monate",year:"1 Jahr",maintenanceTypes:"Wartungstypen",maintenanceTypesDescription:"Systemtypen und Ihre benutzerdefinierten Wartungsaufgaben",addCustomType:"Benutzerdefinierten Typ hinzufügen",restoreDefaults:"Standardaufgaben wiederherstellen",intervalType:"Intervalltyp",intervalValue:"Intervall ({{type}})",icon:"Symbol",documentationLink:"Dokumentationslink (optional)",assignToPrinters:"Druckern zuweisen",selectAtLeastOnePrinter:"Wählen Sie mindestens einen Drucker",addType:"Typ hinzufügen",custom:"Benutzerdefiniert",printHours:"Druckstunden",calendarDays:"Kalendertage",exampleName:"z.B. HEPA-Filter ersetzen",viewDocumentation:"Dokumentation anzeigen",timeBasedInterval:"Zeitbasiertes Intervall",intervalOverrides:"Intervall-Überschreibungen",intervalOverridesDescription:"Intervalle für bestimmte Drucker anpassen",assignedToPrinters:"Druckern zugewiesen:",noPrintersAssigned:"Keine Drucker zugewiesen",addPrinterShort:"Hinzufügen:",printersAssignedClick:"{{count}} Drucker zugewiesen - klicken zum Verwalten",removeFromPrinter:"Von diesem Drucker entfernen",types:{lubricateCarbonRods:"Karbonstäbe schmieren",lubricateRails:"Linearschienen schmieren",cleanNozzle:"Düse/Hotend reinigen",checkBelts:"Riemenspannung prüfen",cleanBuildPlate:"Druckbett reinigen",checkExtruder:"Extruderzahnräder prüfen",checkCooling:"Kühlungslüfter prüfen",generalInspection:"Allgemeine Inspektion",cleanCarbonRods:"Kohlenstoffstangen reinigen",lubricateSteelRods:"Stahlstangen schmieren",cleanSteelRods:"Stahlstangen reinigen",cleanLinearRails:"Linearschienen reinigen",checkPtfeTube:"PTFE-Schlauch prüfen",replaceHepaFilter:"HEPA-Filter ersetzen",replaceCarbonFilter:"Aktivkohlefilter ersetzen",lubricateLeftNozzleRail:"Linke Düsenschiene schmieren"},maintenanceComplete:"Wartung als abgeschlossen markiert",typeUpdated:"Wartungstyp aktualisiert",typeDeleted:"Wartungstyp gelöscht",defaultsRestored:"{{count}} Standardaufgabe(n) wiederhergestellt",printHoursUpdated:"Druckstunden aktualisiert",printerAssigned:"Drucker zugewiesen",printerRemoved:"Drucker entfernt",deleteTypeConfirm:'"{{name}}" löschen?',deleteSystemTypeTitle:"Standard-Wartungsaufgabe löschen?",deleteSystemTypeMessage:'Möchten Sie die Standard-Wartungsaufgabe "{{name}}" wirklich löschen?',noPermissionUpdate:"Sie haben keine Berechtigung, Wartungselemente zu aktualisieren",noPermissionPerform:"Sie haben keine Berechtigung, Wartungen durchzuführen",noPermissionEditTypes:"Sie haben keine Berechtigung, Wartungstypen zu bearbeiten",noPermissionDeleteTypes:"Sie haben keine Berechtigung, Wartungstypen zu löschen",noPermissionEditHours:"Sie haben keine Berechtigung, Druckstunden zu bearbeiten",noPermissionRemovePrinter:"Sie haben keine Berechtigung, Druckerzuweisungen zu entfernen",noPermissionAssignPrinter:"Sie haben keine Berechtigung, Drucker zuzuweisen",noPermissionEditIntervals:"Sie haben keine Berechtigung, Intervalle zu bearbeiten",configureSettings:"Wartungstypen und Intervalle konfigurieren"},settings:{title:"Einstellungen",general:"Allgemein",tabs:{general:"Allgemein",smartPlugs:"Smart Plugs",notifications:"Benachrichtigungen",queue:"Workflow",filament:"Filament",network:"Netzwerk",apiKeys:"API-Schlüssel",virtualPrinter:"Virtueller Drucker",spoolbuddy:"SpoolBuddy",failureDetection:"Fehlererkennung",users:"Authentifizierung",backup:"Sicherung",emailAuth:"E-Mail-Authentifizierung",ldap:"LDAP",twoFa:"Zwei-Faktor-Auth",oidc:"SSO / OIDC",security:"Sicherheit"},spoolbuddy:{infoTitle:"SpoolBuddy-Geräte",infoBody:"SpoolBuddy-Kioske registrieren sich automatisch per Heartbeat. Ein Gerät hier abmelden, wenn es nicht mehr verwendet wird oder wenn ein veralteter Eintrag nach einem Daemon-Absturz übrig geblieben ist.",duplicatesTitle:"{{count}} Geräte registriert",duplicatesBody:"Die Kiosk-Oberfläche verwendet nur das zuerst registrierte Gerät. Falls eines davon ein veralteter Doppeleintrag nach einem Absturz ist, kann es hier entfernt werden — ein laufendes Gerät registriert sich beim nächsten Heartbeat automatisch neu.",empty:"Noch keine SpoolBuddy-Geräte registriert.",online:"Online",offline:"Offline",unregister:"Abmelden",unregisterSuccess:"Gerät abgemeldet",unregisterError:"Gerät konnte nicht abgemeldet werden",confirmTitle:"SpoolBuddy-Gerät abmelden?",confirmBody:'Dies entfernt „{{hostname}}" ({{deviceId}}) aus der Datenbank. Ein laufendes Gerät registriert sich beim nächsten Heartbeat automatisch neu.',ipAddress:"IP-Adresse",firmware:"Firmware",lastSeen:"Zuletzt gesehen",daemonUptime:"Daemon-Laufzeit",systemUptime:"System-Laufzeit",never:"nie",nfc:"NFC",scale:"Waage",cpuTemp:"CPU-Temp.",cpuLoad:"CPU-Last",memory:"Speicher",disk:"Festplatte",update:"Aktualisieren",updateConfirmTitle:"Spoolbuddy-Daemon aktualisieren?",updateConfirmBody:'Software-Update auf „{{hostname}}" auslösen? Der Daemon startet nach dem Update neu.',restartBrowser:"Browser neu starten",restartBrowserConfirmTitle:"Kiosk-Browser neu starten?",restartBrowserConfirmBody:'Kiosk-Browser auf „{{hostname}}" neu starten? Die Anzeige wird kurz schwarz.',restartDaemon:"Daemon neu starten",restartDaemonConfirmTitle:"Spoolbuddy-Daemon neu starten?",restartDaemonConfirmBody:'Spoolbuddy-Daemon auf „{{hostname}}" neu starten? Das Gerät ist für einige Sekunden offline.',reboot:"Neustart",rebootConfirmTitle:"Gerät neu starten?",rebootConfirmBody:'„{{hostname}}" neu starten? Das Gerät ist für etwa eine Minute offline.',shutdown:"Herunterfahren",shutdownConfirmTitle:"Gerät herunterfahren?",shutdownConfirmBody:'„{{hostname}}" herunterfahren? Physischer Zugriff ist nötig, um es wieder einzuschalten.',commandConfirm:"Bestätigen",commandQueued:"Befehl eingereiht",commandError:"Befehl konnte nicht gesendet werden"},ldap:{title:"LDAP-Authentifizierung",enabledDesc:"LDAP-Authentifizierung ist aktiviert",disabledDesc:"LDAP-Authentifizierung ist deaktiviert",disabledHint:"LDAP-Einstellungen unten konfigurieren und speichern, dann aktivieren.",enabled:"LDAP-Authentifizierung aktiviert",disabled:"LDAP-Authentifizierung deaktiviert",feature1:"Benutzer können sich mit LDAP-Anmeldedaten anmelden",feature2:"Lokales Admin-Konto bleibt als Fallback erhalten",feature3:"LDAP-Gruppen werden bei der Anmeldung BamBuddy-Gruppen zugeordnet",serverConfig:"LDAP-Server-Konfiguration",serverUrl:"Server-URL",serverUrlHint:"Verwenden Sie ldap:// für Standard oder ldaps:// für SSL-Verbindungen",security:"Sicherheit",securityHint:"StartTLS aktualisiert eine einfache Verbindung auf TLS. LDAPS verwendet TLS von Anfang an.",bindDn:"Bind-DN (Dienstkonto)",bindPassword:"Bind-Passwort",searchBase:"Such-Basis-DN",userFilter:"Benutzer-Suchfilter",userFilterHint:"{username} wird durch den Anmeldenamen ersetzt. Verwenden Sie (uid={username}) für OpenLDAP.",advanced:"Erweitert",autoProvision:"Benutzer automatisch anlegen",autoProvisionHint:"Automatisch ein BamBuddy-Konto bei der ersten LDAP-Anmeldung erstellen",defaultGroup:"Standardgruppe",defaultGroupNone:"— Keine (kein Fallback) —",defaultGroupHint:"Fallback-Gruppe, die zugewiesen wird, wenn sich ein LDAP-Benutzer authentifiziert, aber in keiner zugeordneten LDAP-Gruppe enthalten ist. Leer lassen, um nicht zugeordnete Benutzer ohne Berechtigungen zu belassen.",groupMapping:"Gruppenzuordnung (JSON)",groupMappingHint:"LDAP-Gruppen-DNs BamBuddy-Gruppen zuordnen. Verfügbare Gruppen: ",testConnection:"Verbindung testen",settingsSaved:"LDAP-Einstellungen gespeichert",errors:{serverRequired:"LDAP-Server-URL ist erforderlich",searchBaseRequired:"Such-Basis-DN ist erforderlich",enableAuthFirst:"Authentifizierung zuerst aktivieren",configureLdapFirst:"LDAP-Einstellungen zuerst speichern"}},email:{smtpSettings:"SMTP-Konfiguration",smtpHost:"SMTP-Server",smtpPort:"SMTP-Port",security:"Sicherheit",authentication:"Authentifizierung",username:"Benutzername",password:"Passwort",fromEmail:"Absender-E-Mail",fromName:"Absendername",testConnection:"SMTP-Verbindung testen",testRecipient:"Test-Empfänger-E-Mail",sendTest:"Test-E-Mail senden",sending:"Wird gesendet...",save:"Einstellungen speichern",saving:"Wird gespeichert...",advancedAuth:"Erweiterte Authentifizierung",advancedAuthEnabled:"Erweiterte Authentifizierung ist aktiviert",advancedAuthEnabledDesc:"E-Mail-basierte Benutzerverwaltungsfunktionen sind aktiv. Neue Benutzer erhalten automatisch generierte Passwörter per E-Mail und können ihr Passwort über die Passwort vergessen Funktion zurücksetzen.",advancedAuthDisabled:"Erweiterte Authentifizierung ist deaktiviert",advancedAuthDisabledDesc:"Aktivieren Sie die erweiterte Authentifizierung, um E-Mail-basierte Funktionen für die Benutzerverwaltung zu aktivieren.",enable:"Aktivieren",disable:"Deaktivieren",feature1:"Passwörter werden automatisch generiert und an neue Benutzer gesendet",feature2:"Benutzer können sich mit Benutzername oder E-Mail anmelden",feature3:"Passwort vergessen Funktion ist verfügbar",feature4:"Administratoren können Benutzerpasswörter per E-Mail zurücksetzen",errors:{requiredFields:"Bitte füllen Sie alle Pflichtfelder aus",usernameRequired:"Benutzername ist erforderlich, wenn Authentifizierung aktiviert ist",enterTestEmail:"Bitte geben Sie eine Test-E-Mail-Adresse ein",smtpServerAndEmail:"Bitte füllen Sie SMTP-Server und Absender-E-Mail aus, bevor Sie testen",usernamePasswordRequired:"Benutzername und Passwort sind erforderlich, wenn Authentifizierung aktiviert ist",configureSmtpFirst:"Bitte konfigurieren und testen Sie zuerst die SMTP-Einstellungen",enableAuthFirst:"Bitte aktivieren Sie zuerst die Authentifizierung, um E-Mail-basierte Funktionen nutzen zu können."},success:{settingsSaved:"SMTP-Einstellungen erfolgreich gespeichert"},securityOptions:{starttls:"STARTTLS (Port 587)",ssl:"SSL/TLS (Port 465)",none:"Keine (Port 25)"},authOptions:{enabled:"Aktiviert",disabled:"Deaktiviert"}},appearance:"Erscheinungsbild",notifications:"Benachrichtigungen",smartPlugs:"Smart Plugs",spoolman:"Spoolman",updates:"Aktualisierungen",language:"Sprache",languageDescription:"Wählen Sie Ihre bevorzugte Sprache",theme:"Design",themeLight:"Hell",themeDark:"Dunkel",themeSystem:"System",defaultView:"Standardansicht",defaultViewDescription:"Seite, die beim Öffnen der App angezeigt wird",checkForUpdates:"Nach Updates suchen",autoUpdate:"Automatische Updates",currentVersion:"Aktuelle Version",latestVersion:"Neueste Version",upToDate:"Sie sind auf dem neuesten Stand",updateAvailable:"Update verfügbar",notificationLanguage:"Benachrichtigungssprache",notificationLanguageDescription:"Sprache für Push-Benachrichtigungen",bedCooledThreshold:"Bett-Abkühlung Schwellenwert",bedCooledThresholdDescription:"Temperatur, unter der das Bett nach einem Druck als abgekühlt gilt",userNotificationsEnabled:"Benutzerbenachrichtigungen",userNotificationsEnabledDescription:"Aktiviert das Benutzerbenachrichtigungsmenü und E-Mail-Benachrichtigungen für Druckereignisse. Erfordert Erweiterte Authentifizierung.",userNotificationsDisabledHint:"Erweiterte Authentifizierung aktivieren, um Benutzerbenachrichtigungen zu verwenden.",notificationProviders:"Benachrichtigungsanbieter",addProvider:"Anbieter hinzufügen",editProvider:"Anbieter bearbeiten",providerType:"Anbietertyp",testNotification:"Testbenachrichtigung",testSuccess:"Testbenachrichtigung erfolgreich gesendet",testFailed:"Testbenachrichtigung konnte nicht gesendet werden",quietHours:"Ruhezeiten",quietHoursDescription:"Keine Störungen während dieser Zeiten",quietHoursStart:"Beginn",quietHoursEnd:"Ende",events:{title:"Benachrichtigungsereignisse",printStart:"Druck gestartet",printComplete:"Druck abgeschlossen",printFailed:"Druck fehlgeschlagen",printStopped:"Druck gestoppt",printProgress:"Fortschrittsmeldungen",printProgressDescription:"Bei 25%, 50%, 75% benachrichtigen",printerOffline:"Drucker offline",printerError:"Druckerfehler",filamentLow:"Filament niedrig",maintenanceDue:"Wartung fällig",maintenanceDueDescription:"Benachrichtigen, wenn Wartung erforderlich"},smartPlug:{title:"Smart Plugs",add:"Smart Plug hinzufügen",edit:"Smart Plug bearbeiten",name:"Name",ipAddress:"IP-Adresse",linkedPrinter:"Verknüpfter Drucker",autoOn:"Automatisch einschalten",autoOnDescription:"Einschalten beim Druckstart",autoOff:"Automatisch ausschalten",autoOffDescription:"Ausschalten nach Druckende",offDelay:"Ausschaltverzögerung",offDelayMinutes:"Minuten nach Druck",offDelayTemp:"Wenn Düse unter Temperatur",currentState:"Aktueller Status",turnOn:"Einschalten",turnOff:"Ausschalten"},filamentTracking:"Filament-Verfolgung",filamentTrackingDesc:"Wählen Sie, wie Sie Ihre Filamentspulen verfolgen möchten. Sie können das integrierte Inventar oder einen externen Spoolman-Server verwenden.",filamentChecks:"Filament-Prüfungen",disableFilamentWarnings:"Filament-Warnungen deaktivieren",disableFilamentWarningsDesc:"Keine Warnungen über unzureichendes Filament beim Drucken oder Einreihen anzeigen",preferLowestFilament:"Niedrigsten Filamentrest bevorzugen",preferLowestFilamentDesc:"Bei mehreren passenden Spulen die mit dem geringsten Restfilament verwenden",trackingModeBuiltIn:"Integriertes Inventar",trackingModeBuiltInDesc:"RFID-Erkennung und Verbrauchserfassung inklusive",trackingModeSpoolmanDesc:"Externer Filament-Management-Server",builtInFeatureRfid:"Erkennt automatisch Bambu Lab RFID-Spulen im AMS",builtInFeatureUsage:"Erfasst den Filamentverbrauch pro Druck",builtInFeatureCatalog:"Spulen, Farben und K-Faktor-Profile verwalten",builtInFeatureThirdParty:"Drittanbieter-Spulen können Inventarspulen zugewiesen werden",amsSyncButton:"Gewichte vom AMS synchronisieren",amsSyncTitle:"Spulengewichte vom AMS synchronisieren",amsSyncMessage:"Alle Inventar-Spulengewichte werden mit den aktuellen AMS-Restwerten der verbundenen Drucker überschrieben. Verwenden Sie dies zur Wiederherstellung beschädigter Gewichtsdaten. Drucker müssen online sein.",amsSyncing:"Synchronisiere...",amsSyncSuccess:"{{synced}} Spule(n) synchronisiert, {{skipped}} übersprungen",amsSyncError:"Synchronisierung der Gewichte vom AMS fehlgeschlagen",spoolmanAmsSyncButton:"Spoolman-Gewichte vom AMS synchronisieren",spoolmanAmsSyncTitle:"Spoolman-Spulengewichte vom AMS synchronisieren",spoolmanAmsSyncMessage:"Dabei werden alle Spoolman-Spulengewichte anhand der aktuellen AMS-Füllstandswerte der verbundenen Drucker aktualisiert. Die Drucker müssen online sein.",spoolmanAmsSyncing:"Synchronisiere...",spoolmanAmsSyncSuccess:"{{synced}} Spule(n) synchronisiert, {{skipped}} übersprungen",spoolmanAmsSyncError:"Synchronisierung der Spoolman-Gewichte vom AMS fehlgeschlagen",spoolmanAmsSyncErrorUnreachable:"Synchronisierung fehlgeschlagen (Spoolman nicht erreichbar)",spoolmanAmsSyncErrorNotConfigured:"Synchronisierung fehlgeschlagen (Spoolman nicht konfiguriert)",spoolmanNotConfigured:"Spoolman nicht konfiguriert",spoolmanFilamentCatalogTitle:"Spoolman-Filamentkatalog",spoolmanFilamentCatalogDesc:"Filamentnamen und Leergewichte aus deiner Spoolman-Instanz. Name und Spulengewicht sind hier editierbar; alle anderen Eigenschaften werden direkt in Spoolman verwaltet.",spoolmanUrl:"Spoolman URL",spoolmanUrlHint:"URL Ihres Spoolman-Servers (z.B. http://localhost:7912)",spoolmanConnected:"Verbunden",spoolmanDisconnected:"Nicht verbunden",status:"Status",connect:"Verbinden",disconnect:"Trennen",howSyncWorks:"So funktioniert die Synchronisierung",syncInfoRfidOnly:"Nur offizielle Bambu Lab Spulen mit RFID werden synchronisiert",syncInfoAutoCreate:"Neue Spulen werden bei der ersten Synchronisierung automatisch in Spoolman erstellt",syncInfoThirdPartySkipped:"Nicht-Bambu-Lab-Spulen (Drittanbieter, nachgefüllt) werden übersprungen",linkingExistingSpools:"Vorhandene Spulen verknüpfen",linkingExistingSpoolsDesc:'Um vorhandene Spoolman-Spulen mit Ihrem AMS zu verknüpfen, fahren Sie über einen AMS-Slot und klicken Sie auf "Mit Spoolman verknüpfen".',syncMode:"Synchronisierungsmodus",syncModeAuto:"Automatisch",syncModeManual:"Nur manuell",syncModeAutoDesc:"AMS-Daten werden automatisch synchronisiert, wenn Änderungen erkannt werden",syncModeManualDesc:"Nur bei manueller Auslösung synchronisieren",syncAmsData:"AMS-Daten synchronisieren",syncAmsDataDesc:"AMS-Daten des Druckers manuell mit Spoolman synchronisieren",allPrinters:"Alle Drucker",noDefaultPrinter:"Kein Standard (jedes Mal fragen)",sidebarOrder:"Seitenleisten-Reihenfolge",saveThumbnails:"Vorschaubilder speichern",captureFinishPhoto:"Abschlussfoto aufnehmen",noPrintersConfigured:"Keine Drucker konfiguriert",archiveMode:{always:"Immer Archiveintrag erstellen",never:"Nie Archiveintrag erstellen",ask:"Jedes Mal fragen"},checkForUpdatesLabel:"Nach Updates suchen",checkPrinterFirmware:"Drucker-Firmware prüfen",includeBetaUpdates:"Beta-Versionen einschließen",includeBetaUpdatesDesc:"Über Beta- und Vorabversionen bei der Updateprüfung benachrichtigen",enableRetry:"Wiederholung aktivieren",homeAssistantDescription:"Smart Plugs über Home Assistant steuern",environmentManagedLabel:"(Umgebungsvariable)",autoEnabledViaEnv:"Automatisch über Umgebungsvariablen aktiviert",urlFromEnvReadOnly:"Wert wird über HA_URL Umgebungsvariable gesetzt (schreibgeschützt)",tokenFromEnvReadOnly:"Wert wird über HA_TOKEN Umgebungsvariable gesetzt (schreibgeschützt)",mqttConnectedTo:"Verbunden mit",prometheusDescription:"Druckerdaten im Prometheus-Format bereitstellen",noSmartPlugsTitle:"Keine Smart Plugs konfiguriert",noSmartPlugsDescription:"Fügen Sie einen Tasmota-basierten Smart Plug hinzu, um den Energieverbrauch zu verfolgen und die Stromsteuerung zu automatisieren.",noProvidersTitle:"Keine Anbieter konfiguriert",noProvidersDescription:"Fügen Sie einen Anbieter hinzu, um Benachrichtigungen zu erhalten.",noTemplatesAvailable:"Keine Vorlagen verfügbar. Starten Sie das Backend neu, um Standardvorlagen zu laden.",apiPermissionView:"Druckerstatus und Warteschlange anzeigen",apiPermissionEdit:"Elemente zur Druckwarteschlange hinzufügen und entfernen",apiKeysEmptyTitle:"Keine API-Schlüssel",apiKeysEmptyDescription:"Erstellen Sie einen API-Schlüssel zur Integration mit externen Diensten.",noUsersFound:"Keine Benutzer gefunden",noGroupsFound:"Keine Gruppen gefunden",noGroupsAvailable:"Keine Gruppen verfügbar",passwordsDoNotMatch:"Passwörter stimmen nicht überein",systemGroupWarning:"System-Gruppennamen können nicht geändert werden",authDisabledTitle:"Authentifizierung ist deaktiviert",authDisabledFeature1:"Anmeldung zum Zugriff auf das System erforderlich",authDisabledFeature2:"Mehrere Benutzer mit gruppenbasierten Berechtigungen erstellen",authDisabledFeature3:"Zugriff mit über 50 granularen Berechtigungen steuern",userHasCreated:"Dieser Benutzer hat erstellt:",userItemsQuestion:"Was möchten Sie mit diesen Elementen tun?",deleteUserConfirm:"Möchten Sie diesen Benutzer wirklich löschen?",actionCannotBeUndone:"Diese Aktion kann nicht rückgängig gemacht werden.",addFirstSmartPlug:"Ersten Smart Plug hinzufügen",providers:"Anbieter",log:"Protokoll",testAll:"Alle testen",testResults:"Testergebnisse",testPassedCount:"{{count}} bestanden",testFailedCount:"{{count}} fehlgeschlagen",messageTemplates:"Nachrichtenvorlagen",messageTemplatesDescription:"Passen Sie Benachrichtigungen für jedes Ereignis an.",apiKeys:"API-Schlüssel",apiKeysDescription:"Erstellen Sie API-Schlüssel für externe Integrationen und Webhooks.",createKey:"Schlüssel erstellen",apiKeyCreated:"API-Schlüssel erfolgreich erstellt",apiKeyCopyWarning:"Kopieren Sie diesen Schlüssel jetzt - er wird nicht mehr angezeigt!",useInApiBrowser:"Im API-Browser verwenden",createNewApiKey:"Neuen API-Schlüssel erstellen",keyName:"Schlüsselname",keyNamePlaceholder:"z.B. Home Assistant, OctoPrint",readStatus:"Status lesen",readStatusDescription:"Druckerstatus und Warteschlange anzeigen",manageQueue:"Warteschlange verwalten",manageQueueDescription:"Elemente zur Druckwarteschlange hinzufügen und entfernen",controlPrinter:"Drucker steuern",controlPrinterDescription:"Drucke pausieren, fortsetzen und stoppen",manageLibrary:"Bibliothek verwalten",manageLibraryDescription:"Bibliotheksdateien hochladen, umbenennen und löschen; Modelle aus MakerWorld importieren",manageInventory:"Bestand verwalten",manageInventoryDescription:"Spulen und Bestandseinträge anlegen, ändern und löschen. Erforderlich für SpoolBuddy-Kioske (NFC-Scan, Waagenmessungen, Kiosk-Systembefehle).",libraryBadge:"Bibliothek",inventoryBadge:"Bestand",cloudAccess:"Cloud-Zugriff erlauben",cloudAccessDescription:"Liest Bambu-Cloud-Presets und -Filamente in Ihrem Namen. Erfordert eine Anmeldung in Bambu Cloud.",cloudBadge:"Cloud",updateEnergyCost:"Strompreis aktualisieren",updateEnergyCostDescription:"Erlaubt diesem Schlüssel, einen neuen Strompreis pro kWh an /settings/electricity-price zu senden. Nützlich für Home-Assistant-Automatisierungen mit dynamischen Tarifen (Tibber, Octopus usw.). Dies ist das einzige Einstellungsfeld, das per API-Schlüssel schreibbar ist.",energyCostBadge:"Energie",legacyKey:"Alt",legacyKeyTooltip:"Wurde vor der nutzerbezogenen Eigentümerschaft erstellt; neu erstellen, um Cloud-Zugriff zu nutzen",unnamedKey:"Unbenannter Schlüssel",lastUsed:"Zuletzt verwendet",read:"Lesen",control:"Steuern",createFirstKey:"Ersten Schlüssel erstellen",webhookEndpoints:"Webhook-Endpunkte",webhookApiKeyHint:"Verwenden Sie Ihren API-Schlüssel im X-API-Key-Header.",webhook:{getAllStatus:"Alle Druckerstatus abrufen",getSpecificStatus:"Spezifischen Druckerstatus abrufen",addToQueue:"Zur Druckwarteschlange hinzufügen",pausePrint:"Druck pausieren",resumePrint:"Druck fortsetzen",stopPrint:"Druck stoppen"},apiBrowser:"API-Browser",apiBrowserDescription:"Erkunden und testen Sie alle verfügbaren API-Endpunkte.",apiKeyForTesting:"API-Schlüssel zum Testen",apiKeyPlaceholder:"Fügen Sie hier Ihren API-Schlüssel ein, um authentifizierte Endpunkte zu testen...",apiKeyHint:"Dieser Schlüssel wird als X-API-Key-Header mit Anfragen gesendet.",deleteApiKeyTitle:"API-Schlüssel löschen",deleteApiKeyMessage:"Möchten Sie diesen API-Schlüssel wirklich löschen? Alle Integrationen, die diesen Schlüssel verwenden, funktionieren nicht mehr.",deleteKey:"Schlüssel löschen",amsDisplayThresholds:"AMS-Anzeigeschwellenwerte",amsThresholdsDescription:"Konfigurieren Sie Farbschwellenwerte für AMS-Feuchtigkeits- und Temperaturanzeigen.",humidity:"Luftfeuchtigkeit",goodGreen:"Gut (grün)",fairOrange:"Mittel (orange)",aboveFairBad:"Über dem mittleren Schwellenwert wird rot angezeigt (schlecht)",fairAlsoDryingThreshold:"Dieser Schwellenwert wird auch für die automatische Trocknung verwendet",temperature:"Temperatur",goodBlue:"Gut (blau)",aboveFairHot:"Über dem mittleren Schwellenwert wird rot angezeigt (heiß)",historyRetention:"Verlaufsaufbewahrung",keepSensorHistory:"Sensorverlauf behalten für",historyRetentionDescription:"Ältere Feuchtigkeits- und Temperaturdaten werden automatisch gelöscht",defaultPrintOptions:"Standard-Druckoptionen",defaultPrintOptionsDescription:"Standardwerte für Druckoptionen bei neuen Drucken festlegen. Diese können im Druckdialog pro Druck überschrieben werden.",defaultBedLevelling:"Bett-Nivellierung",defaultBedLevellingDesc:"Bett vor dem Druck automatisch nivellieren",defaultFlowCali:"Fluss-Kalibrierung",defaultFlowCaliDesc:"Extrusionsfluss kalibrieren",defaultVibrationCali:"Vibrationskalibrierung",defaultVibrationCaliDesc:"Ringing-Artefakte reduzieren",defaultLayerInspect:"Erste-Schicht-Inspektion",defaultLayerInspectDesc:"KI-Inspektion der ersten Schicht",defaultTimelapse:"Zeitraffer",defaultTimelapseDesc:"Zeitraffervideo aufnehmen",staggeredStart:"Versetzter Start",staggeredStartDescription:"Standard-Gruppengröße und -Intervall beim Staffeln von Mehrdrucker-Batchstarts. Pro Batch im Druck-Dialog überschreibbar.",plateClear:"Druckplatte-Bestätigung",requirePlateClear:"Druckplatte-Bestätigung erforderlich",requirePlateClearDescription:'Wenn aktiviert, wartet der Scheduler auf eine Druckplatten-Bestätigung pro Drucker, bevor geplante Drucke auf Druckern mit abgeschlossenen Aufträgen gestartet werden. Wenn dies deaktiviert ist, werden auch das Druckplatten-Status-Badge und die Schaltfläche "Druckplatte als freigegeben markieren" auf den Druckerkarten ausgeblendet.',gcodeInjection:"G-Code-Injektion",gcodeInjectionDescription:'Konfigurieren Sie benutzerdefinierten G-code, der am Anfang und/oder Ende von Drucken für Auto-Print-Systeme wie Farmloop, SwapMod, AutoClear und Printflow 3D eingefügt wird. Snippets werden pro Druckermodell konfiguriert und angewendet, wenn "G-code einfügen" bei einem Warteschlangen-Element aktiviert ist.',gcodeInjectionNoPrinters:"Keine Drucker gefunden. Fügen Sie Drucker hinzu, um G-code-Snippets zu konfigurieren.",gcodeStartLabel:"Start-G-Code",gcodeEndLabel:"End-G-Code",gcodeStartPlaceholder:"G-code, der vor dem Druckstart eingefügt wird...",gcodeEndPlaceholder:"G-code, der nach dem Druckende angefügt wird...",staggerGroupSize:"Gruppengröße",staggerGroupSizeHelp:"Anzahl gleichzeitig zu startender Drucker pro Gruppe",staggerInterval:"Intervall (Minuten)",staggerIntervalHelp:"Verzögerung zwischen Gruppenstart",queueDrying:"Automatische Trocknung",queueDryingDescription:"AMS-Filament automatisch trocknen, wenn der Drucker zwischen Warteschlangen-Drucken im Leerlauf ist. Verwendet den Feuchtigkeitsschwellenwert oben.",queueDryingEnabled:"Automatische Trocknung aktivieren",queueDryingEnabledDescription:"AMS-Trocknung automatisch starten, wenn der Drucker im Leerlauf ist und die Feuchtigkeit über dem Schwellenwert liegt",queueDryingBlock:"Auf Trocknung warten",queueDryingBlockDescription:"Druckwarteschlange blockieren, bis die Trocknung abgeschlossen ist. Wenn aus, haben Drucke Vorrang.",ambientDryingEnabled:"Umgebungstrocknung",ambientDryingEnabledDescription:"Filament auf inaktiven Druckern automatisch trocknen, wenn die Luftfeuchtigkeit den Schwellenwert überschreitet — auch ohne Warteschlange.",dryingPresets:"Trocknungsvoreinstellungen",dryingPresetsDescription:"Temperatur und Dauer pro Filamenttyp. AMS 2 Pro verwendet niedrigere Temperaturen, AMS-HT unterstützt höhere.",dryingFilament:"Filament",printModal:"Druckdialog",expandCustomMapping:"Benutzerdefinierte Zuordnung standardmäßig erweitern",expandCustomMappingDescription:"Bei Druck auf mehrere Drucker die AMS-Zuordnung pro Drucker erweitert anzeigen",authentication:"Authentifizierung",authEnabledDescription:"Ihre Instanz ist mit Benutzerauthentifizierung gesichert",authDisabledDescription:"Aktivieren Sie die Anmeldepflicht und verwalten Sie den Benutzerzugriff",authDisabledMessage:"Aktivieren Sie die Authentifizierung, um Benutzerkonten zu erstellen, Berechtigungen zu verwalten und Ihre Bambuddy-Instanz zu sichern.",enableAuthentication:"Authentifizierung aktivieren",currentUser:"Aktueller Benutzer",changePassword:"Passwort ändern",admin:"Admin",users:"Benutzer",addUser:"Benutzer hinzufügen",groups:"Gruppen",addGroup:"Gruppe hinzufügen",system:"System",noDescription:"Keine Beschreibung",userCount:"{{count}} Benutzer",permissionCount:"{{count}} Berechtigungen",createUser:"Benutzer erstellen",username:"Benutzername",enterUsername:"Benutzername eingeben",password:"Passwort",enterPassword:"Passwort eingeben",passwordRequirements:"Mindestens 8 Zeichen, davon ein Großbuchstabe, ein Kleinbuchstabe, eine Ziffer und ein Sonderzeichen.",confirmPassword:"Passwort bestätigen",confirmPasswordPlaceholder:"Passwort bestätigen",viewReleaseOnGitHub:"Release auf GitHub anzeigen",turnAllPlugsOn:"Alle Stecker einschalten",turnAllPlugsOff:"Alle Stecker ausschalten",clearNotificationLogs:"Benachrichtigungsprotokolle löschen",clearLogsMessage:"Dadurch werden alle Benachrichtigungsprotokolle, die älter als 30 Tage sind, dauerhaft gelöscht. Diese Aktion kann nicht rückgängig gemacht werden.",clearLogs:"Protokolle löschen",resetUiPreferences:"UI-Einstellungen zurücksetzen",resetUiPreferencesMessage:"Dadurch werden alle UI-Einstellungen auf Standardwerte zurückgesetzt: Seitenleisten-Reihenfolge, Theme, Dashboard-Layout, Ansichtsmodi und Sortiereinstellungen. Ihre Drucker, Archive und Servereinstellungen werden NICHT beeinträchtigt. Die Seite wird nach dem Löschen neu geladen.",resetPreferences:"Einstellungen zurücksetzen",deleteGroupTitle:"Gruppe löschen",deleteGroupMessage:"Möchten Sie diese Gruppe wirklich löschen? Benutzer in dieser Gruppe verlieren diese Berechtigungen.",deleteGroup:"Gruppe löschen",disableAuthenticationTitle:"Authentifizierung deaktivieren",disableAuthenticationMessage:"Möchten Sie die Authentifizierung wirklich deaktivieren? Dadurch wird Ihre Bambuddy-Instanz ohne Anmeldung zugänglich. Alle Benutzer bleiben in der Datenbank, aber die Authentifizierung wird deaktiviert.",disableAuthentication:"Authentifizierung deaktivieren",configureBambuddy:"Bambuddy konfigurieren",systemDefault:"Systemstandard",archiveSettings:"Archiv-Einstellungen",newWindow:"Neues Fenster",embeddedOverlay:"Eingebettetes Overlay",preferredSlicer:"Bevorzugter Slicer",preferredSlicerDescription:"Wähle die Slicer-Anwendung zum Öffnen von Dateien",orcaslicerKnownIssuesWarning:"OrcaSlicer 2.3.2 / 2.4.0-dev haben bekannte CLI-Bugs, die das Slicen vieler von BambuStudio erstellter 3MF-Dateien blockieren — siehe Upstream-Issues #12426 (Segfault bei bemalten Multi-Extruder-Dateien) und #13386 (zu strikte Parameter-Range-Validierung). Bis die Upstream-Fixes verfügbar sind, wird Bambu Studio empfohlen.",useSlicerApi:"Slicer-API verwenden",useSlicerApiDescription:'Wenn aktiv, öffnen "Slice"-Aktionen das in-App Slicer-Modal und rufen den Slicer-API-Sidecar. Aus (Standard): Übergabe an den Desktop-Slicer per URI-Schema.',slicerCard:"Slicer",orcaslicerApiUrl:"OrcaSlicer Sidecar-URL",bambuStudioApiUrl:"Bambu Studio Sidecar-URL",slicerApiUrlDescription:"URL des Slicer-API-Sidecar-Containers. Leer lassen, um die SLICER_API_URL- bzw. BAMBU_STUDIO_API_URL-Umgebungsvariablen zu nutzen.",slicerBundles:{title:"Slicer-Bundles",description:'Importiere ein Drucker-Voreinstellungspaket (.bbscfg), das aus BambuStudio exportiert wurde (Datei → Exportieren → Voreinstellungspaket exportieren → "Drucker-Voreinstellungspaket"). Nach dem Import können Slice-Anfragen Voreinstellungen aus dem Bundle per Name auswählen, ohne das JSON-Profil-Trio erneut hochzuladen.',uploadButton:"Bundle hochladen",uploading:"Hochladen…",loading:"Bundles werden geladen…",empty:"Noch keine Bundles importiert.",summary:"{{processCount}} Prozess · {{filamentCount}} Filament-Voreinstellungen",delete:"Löschen",uploadSuccess:"{{name}} importiert",uploadError:"Bundle-Upload fehlgeschlagen: {{message}}",deleteSuccess:"Bundle entfernt",deleteError:"Löschen des Bundles fehlgeschlagen: {{message}}",confirmDeleteTitle:"Dieses Bundle entfernen?",confirmDeleteMessage:'Slice-Anfragen, die "{{name}}" referenzieren, schlagen fehl, bis das Bundle erneut importiert wird.'},externalCameras:"Externe Kameras",costTracking:"Kostenverfolgung",printsOnly:"Nur Drucke",totalConsumption:"Gesamtverbrauch",dataManagement:"Datenverwaltung",storageUsage:"Speichernutzung",storageUsageDescription:"Aufschlüsselung der Datennutzung nach Kategorie",storageUsageTotal:"Gesamt",storageUsageErrors:"Fehler",storageUsageOtherBreakdown:"Sonstiges (enthält statische Assets, Skripte und Konfigurationsdateien)",storageUsageSystem:"System",storageUsageData:"Daten",storageUsageUnavailable:"Speichernutzungsinformationen nicht verfügbar",clearNotificationLogsDescription:"Benachrichtigungsprotokolle älter als 30 Tage löschen",resetUiPreferencesDescription:"Seitenleisten-Reihenfolge, Theme, Ansichtsmodi und Layout-Einstellungen zurücksetzen. Drucker, Archive und Einstellungen werden nicht beeinflusst.",enableHomeAssistant:"Home Assistant aktivieren",enableMqtt:"MQTT aktivieren",useTls:"TLS verwenden",enableMetricsEndpoint:"Metrik-Endpunkt aktivieren",availableMetrics:"Verfügbare Metriken",editUser:"Benutzer bearbeiten",deleteUserTitle:"Benutzer löschen",groupName:"Gruppenname",leaveEmptyForAnonymous:"Leer lassen für anonym",leaveEmptyForNoAuth:"Leer lassen für keine Authentifizierung",enterNewPassword:"Neues Passwort eingeben",confirmNewPassword:"Neues Passwort bestätigen",enterGroupName:"Gruppenname eingeben",enterDescriptionOptional:"Beschreibung eingeben (optional)",enterCurrentPassword:"Aktuelles Passwort eingeben",enterNewPasswordMin6:"Neues Passwort eingeben (min. 6 Zeichen)",toast:{keyCopied:"Schlüssel in Zwischenablage kopiert",copyFailed:"Schlüssel konnte nicht kopiert werden",keyAddedToBrowser:"Schlüssel zum API-Browser hinzugefügt",clearLogsFailed:"Protokolle konnten nicht gelöscht werden",uiPreferencesReset:"UI-Einstellungen zurückgesetzt. Wird neu geladen...",authDisabled:"Authentifizierung erfolgreich deaktiviert",authDisableFailed:"Authentifizierung konnte nicht deaktiviert werden",apiKeyCreated:"API-Schlüssel erstellt",apiKeyDeleted:"API-Schlüssel gelöscht",userCreated:"Benutzer erfolgreich erstellt",userUpdated:"Benutzer erfolgreich aktualisiert",userDeleted:"Benutzer erfolgreich gelöscht",groupCreated:"Gruppe erfolgreich erstellt",groupUpdated:"Gruppe erfolgreich aktualisiert",groupDeleted:"Gruppe erfolgreich gelöscht",fillRequiredFields:"Bitte füllen Sie alle erforderlichen Felder aus",passwordsDoNotMatch:"Passwörter stimmen nicht überein",passwordTooShort:"Passwort muss mindestens 8 Zeichen lang sein",passwordNeedsUppercase:"Passwort muss mindestens einen Großbuchstaben enthalten",passwordNeedsLowercase:"Passwort muss mindestens einen Kleinbuchstaben enthalten",passwordNeedsDigit:"Passwort muss mindestens eine Ziffer enthalten",passwordNeedsSpecial:"Passwort muss mindestens ein Sonderzeichen enthalten",enterGroupName:"Bitte geben Sie einen Gruppennamen ein",settingsSaved:"Einstellungen gespeichert",noPermissionUpdate:"Sie haben keine Berechtigung, Einstellungen zu ändern",cameraSettingsSaved:"Kamera-Einstellungen gespeichert",enterCameraUrl:"Bitte geben Sie eine Kamera-URL ein",passwordChanged:"Passwort erfolgreich geändert",connectionFailed:"Verbindung fehlgeschlagen",testFailed:"Test fehlgeschlagen",cameraConnected:"Kamera verbunden{{resolution}}"},testConnection:"Verbindung testen",catalog:{spoolCatalog:"Spulenkatalog",spoolCatalogDescription:"Leerspulengewichte nach Marke/Typ. Wird für die automatische Gewichtssuche beim Hinzufügen von Spulen verwendet.",searchCatalog:"Katalog durchsuchen...",addNewEntry:"Neuen Eintrag hinzufügen",namePlaceholder:"Name (z.B. Bambu Lab - Plastik)",weight:"Gewicht",type:"Typ",default:"Standard",custom:"Benutzerdefiniert",noMatch:"Keine Einträge entsprechen Ihrer Suche",empty:"Keine Einträge im Katalog",deleteEntry:"Eintrag löschen",deleteConfirm:'Möchten Sie "{{name}}" wirklich löschen?',resetCatalog:"Katalog zurücksetzen",resetConfirm:"Katalog auf Standardwerte zurücksetzen? Alle benutzerdefinierten Einträge werden entfernt.",loadFailed:"Spulenkatalog konnte nicht geladen werden",nameWeightRequired:"Name und Gewicht sind erforderlich",entryAdded:"Eintrag hinzugefügt",addFailed:"Eintrag konnte nicht hinzugefügt werden",entryUpdated:"Eintrag aktualisiert",updateFailed:"Eintrag konnte nicht aktualisiert werden",entryDeleted:"Eintrag gelöscht",deleteFailed:"Eintrag konnte nicht gelöscht werden",resetSuccess:"Katalog auf Standardwerte zurückgesetzt",resetFailed:"Katalog konnte nicht zurückgesetzt werden",exported:"{{count}} Einträge exportiert",imported:"{{added}} Einträge importiert ({{skipped}} übersprungen)",importFailed:"Import fehlgeschlagen: ungültiges JSON-Format",exportTooltip:"Katalog als JSON exportieren",importTooltip:"Katalog aus JSON importieren",resetTooltip:"Auf Standardwerte zurücksetzen",selectedCount:"{{count}} ausgewählt",deleteSelected:"Ausgewählte löschen",bulkDeleteConfirm:"Möchten Sie {{count}} Einträge wirklich löschen?",bulkDeleted:"{{count}} Einträge gelöscht",bulkDeleteFailed:"Fehler beim Löschen der Einträge",material:"Material",spoolWeight:"Spulengewicht",color:"Farbe",updateSpoolWeight:"Spulengewicht aktualisieren",filamentUpdated:"Filament aktualisiert",filamentUpdateFailed:"Filament konnte nicht aktualisiert werden",filamentUpdateInvalid:"Ungültige Filamentdaten",keepExistingSpoolWeight:"Altes Gewicht für bestehende Spulen behalten",keepExistingSpoolWeightDesc:"Bereits erstellte Spulen dieses Filamenttyps behalten das alte Leergewicht. Neue Spulen nutzen den neuen Wert.",applyToAllSpools:"Auf alle Spulen anwenden",applyToAllSpoolsDesc:"Alle Gewichtsberechnungen für diesen Filamenttyp nutzen sofort das neue Leergewicht."},colorCatalog:{title:"Farbkatalog",description:"Filamentfarben nach Hersteller/Material. Wird für die automatische Farbsuche beim Hinzufügen von Spulen verwendet.",searchColors:"Farben durchsuchen...",allManufacturers:"Alle Hersteller",addNewColor:"Neue Farbe hinzufügen",manufacturer:"Hersteller",colorName:"Farbname",hex:"Hex",materialOptional:"Material (optional)",showing:"{{filtered}} von {{total}} Farben angezeigt",noMatch:"Keine Farben entsprechen Ihrer Suche",empty:"Keine Farben im Katalog",deleteColor:"Farbe löschen",deleteConfirm:'Möchten Sie "{{name}}" wirklich löschen?',resetCatalog:"Farbkatalog zurücksetzen",resetConfirm:"Katalog auf Standardwerte zurücksetzen? Alle benutzerdefinierten Farben werden entfernt.",sync:"Synchron.",starting:"Starten...",syncTooltip:"Von FilamentColors.xyz synchronisieren (2000+ Farben)",loadFailed:"Farbkatalog konnte nicht geladen werden",fieldsRequired:"Hersteller, Farbname und Hex-Farbe sind erforderlich",colorAdded:"Farbe hinzugefügt",addFailed:"Farbe konnte nicht hinzugefügt werden",colorUpdated:"Farbe aktualisiert",updateFailed:"Farbe konnte nicht aktualisiert werden",colorDeleted:"Farbe gelöscht",deleteFailed:"Farbe konnte nicht gelöscht werden",resetSuccess:"Farbkatalog auf Standardwerte zurückgesetzt",resetFailed:"Katalog konnte nicht zurückgesetzt werden",syncUpToDate:"Bereits aktuell ({{count}} Farben geprüft)",syncComplete:"{{added}} neue Farben hinzugefügt ({{skipped}} bereits vorhanden)",syncError:"Sync-Fehler",syncFailed:"Synchronisierung von FilamentColors.xyz fehlgeschlagen",exported:"{{count}} Farben exportiert",imported:"{{added}} Farben importiert ({{skipped}} übersprungen)",importFailed:"Import fehlgeschlagen: ungültiges JSON-Format",selectedCount:"{{count}} ausgewählt",deleteSelected:"Ausgewählte löschen",bulkDeleteConfirm:"Möchten Sie {{count}} Farben wirklich löschen?",bulkDeleted:"{{count}} Farben gelöscht",bulkDeleteFailed:"Fehler beim Löschen der Farben"},dateFormat:"Datumsformat",dateFormatUs:"US (MM/TT/JJJJ)",dateFormatEu:"EU (TT/MM/JJJJ)",dateFormatIso:"ISO (JJJJ-MM-TT)",timeFormat:"Zeitformat",timeFormat12:"12-Stunden (3:30 PM)",timeFormat24:"24-Stunden (15:30)",defaultPrinter:"Standarddrucker",defaultPrinterDescription:"Diesen Drucker für Uploads, Nachdrucke und andere Vorgänge vorauswählen.",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"Elemente in der Seitenleiste per Drag & Drop neu anordnen. Hier auf Standardreihenfolge zurücksetzen.",setDefault:"Standard setzen",sidebarOrderSetDefaultHint:"Standard setzen übernimmt die aktuelle Menüreihenfolge für Benutzer, die ihre noch nicht angepasst haben.",sidebarDefaultSet:"Standard-Menüreihenfolge wurde festgelegt.",sidebarDefaultCleared:"Standard-Menüreihenfolge gelöscht.",sidebarDefaultFailed:"Festlegen der Standard-Menüreihenfolge fehlgeschlagen.",reset:"Zurücksetzen",darkMode:"Dunkelmodus",lightMode:"Hellmodus",active:"(aktiv)",background:"Hintergrund",accent:"Akzent",style:"Stil",bgNeutral:"Neutral",bgWarm:"Warm",bgCool:"Kühl",bgOled:"OLED Schwarz",bgSlate:"Schieferblau",bgForest:"Waldgrün",accentGreen:"Grün",accentTeal:"Türkis",accentBlue:"Blau",accentOrange:"Orange",accentPurple:"Lila",accentRed:"Rot",styleClassic:"Klassisch",styleGlow:"Leuchtend",styleVibrant:"Lebendig",themeToggleHint:"Zwischen Dunkel-, Hell- und Systemmodus mit dem Symbol in der Seitenleiste wechseln.",autoArchivePrints:"Drucke automatisch archivieren",autoArchiveDescription:"3MF-Dateien automatisch speichern, wenn Drucke abgeschlossen sind",saveThumbnailsDescription:"Vorschaubilder aus 3MF-Dateien extrahieren und speichern",captureFinishPhotoDescription:"Foto von der Druckerkamera aufnehmen, wenn der Druck abgeschlossen ist. Bambuddy zeichnet während des Drucks einen kurzen Zeitraffer auf, damit das Foto aus dem Moment vor dem Absenken der Druckplatte stammen kann. Die Zeitraffer-Datei bleibt erhalten, wenn du den Zeitraffer für diesen Druck aktiviert hast, andernfalls wird sie nach Aufnahme des Fotos automatisch gelöscht.",ffmpegNotInstalled:"ffmpeg nicht installiert",ffmpegRequired:"Kameraaufnahme benötigt ffmpeg. Installieren über <brew>brew install ffmpeg</brew> (macOS) oder <apt>apt install ffmpeg</apt> (Linux).",camera:"Kamera",cameraViewMode:"Kamera-Ansichtsmodus",cameraOverlayDescription:"Kamera öffnet sich als größenveränderbares Overlay auf dem Hauptbildschirm",cameraWindowDescription:"Kamera öffnet sich in einem separaten Browserfenster",externalCamerasDescription:"Externe Kameras konfigurieren, um die eingebaute Druckerkamera zu ersetzen. Unterstützt MJPEG-Streams, RTSP, HTTP-Snapshots und USB-Kameras (V4L2). Wenn aktiviert, wird die externe Kamera für Live-Ansicht und Abschlussfotos verwendet.",cameraPlaceholderUsb:"Gerätepfad (/dev/video0)",cameraPlaceholderUrl:"Kamera-URL (rtsp://... oder http://...)",cameraTypeMjpeg:"MJPEG-Stream",cameraTypeRtsp:"RTSP-Stream",cameraTypeSnapshot:"HTTP-Snapshot",cameraTypeUsb:"USB-Kamera (V4L2)",cameraSnapshotUrl:"Snapshot-URL (optional)",cameraSnapshotUrlPlaceholder:"http://192.168.1.61:1984/api/frame.jpeg?src=printer",cameraSnapshotUrlHelp:"URL für Einzelbildaufnahmen — wird für Benachrichtigungs-Vorschaubilder, Abschlussfotos, Schicht-Zeitraffer und Plattenerkennung verwendet. Zeitraffer und Plattenerkennung benötigen jeweils eigene drucker-spezifische Schalter — diese URL ist nur die Bildquelle, die sie verwenden, wenn sie aktiv sind. Leer lassen, um Bilder aus dem oben konfigurierten Live-Stream zu verwenden. Nützlich für go2rtc (/api/frame.jpeg) und IP-Kameras mit dediziertem Snapshot-Endpunkt.",cameraRotation:"Drehung",test:"Testen",connected:"Verbunden",disconnected:"Getrennt",currency:"Währung",defaultFilamentCost:"Standard-Filamentkosten (pro kg)",electricityCost:"Stromkosten pro kWh",energyDisplayMode:"Energieanzeige-Modus",energyModePrintDescription:"Dashboard zeigt Summe der während Drucken verbrauchten Energie",energyModeTotalDescription:"Dashboard zeigt Gesamtenergie der Smart Plugs",fileManager:"Dateimanager",createArchiveEntry:"Archiveintrag beim Drucken erstellen",createArchiveEntryDescription:"Beim Drucken aus dem Dateimanager optional einen Archiveintrag erstellen",lowDiskSpaceWarning:"Warnung bei wenig Speicherplatz",lowDiskSpaceDescription:"Warnung anzeigen, wenn freier Speicherplatz unter diesen Schwellenwert fällt",printerFirmware:"Drucker-Firmware",checkFirmwareDescription:"Nach Firmware-Updates von Bambu Lab suchen",bambuddySoftware:"Bambuddy-Software",autoCheckDescription:"Automatisch beim Start nach neuen Versionen suchen",checkNow:"Jetzt prüfen",updateAvailableVersion:"Update verfügbar: v{{version}}",releaseNotes:"Versionshinweise",updateViaDocker:"Update über Docker Compose:",updateViaHomeAssistant:"Updates werden vom Home Assistant Supervisor verwaltet. Öffne Einstellungen → Add-ons → Bambuddy in Home Assistant, um die neue Version zu installieren.",installUpdate:"Update installieren",latestVersionRunning:"Sie verwenden die neueste Version",failedToCheckUpdates:"Update-Prüfung fehlgeschlagen: {{error}}",backupRestore:"Sicherung & Wiederherstellung",backupRestoreDescription:"Einstellungen exportieren/importieren und GitHub-Backup konfigurieren",goToBackup:"Zur Sicherung",externalUrl:"Externe URL",externalUrlDescription:"Die externe URL, unter der Bambuddy erreichbar ist. Wird für Benachrichtigungsbilder und externe Integrationen verwendet.",bambuddyUrl:"Bambuddy-URL",externalUrlHint:"Protokoll und Port angeben (z.B. http://192.168.1.100:8000)",ftpRetry:"FTP-Wiederholung",ftpRetryDescription:"FTP-Operationen bei unzuverlässigem Drucker-WLAN wiederholen. Gilt für 3MF-Downloads, Druck-Uploads, Zeitraffer-Downloads und Firmware-Updates.",autoRetryDescription:"Fehlgeschlagene FTP-Operationen automatisch wiederholen",retryAttempts:"Wiederholungsversuche",retryDelay:"Wiederholungsverzögerung",connectionTimeout:"Verbindungs-Timeout",time_one:"{{count}} Mal",time_other:"{{count}} Mal",second_one:"{{count}} Sekunde",second_other:"{{count}} Sekunden",nSeconds:"{{count}} Sekunden",increaseForWeakWifi:"Erhöhen für Drucker mit schwachem WLAN",homeAssistant:"Home Assistant",homeAssistantFullDescription:"Mit Home Assistant verbinden, um Smart Plugs über die HA REST-API zu steuern. Unterstützt Switch-, Light-, Input_Boolean- und Script-Entitäten.",homeAssistantUrl:"Home Assistant URL",longLivedAccessToken:"Langlebiges Zugriffstoken",haTokenHint:"Token in HA erstellen: Profil → Langlebige Zugriffstoken → Token erstellen",connectionSuccessful:"Verbindung erfolgreich",connectionFailed:"Verbindung fehlgeschlagen",haConnectionSuccess:"Erfolgreich mit Home Assistant verbunden.",haConnectionFailed:"Verbindung zu Home Assistant fehlgeschlagen.",mqttPublishing:"MQTT-Veröffentlichung",mqttDescription:"BamBuddy-Ereignisse an einen externen MQTT-Broker zur Integration mit Node-RED, Home Assistant und anderen Automatisierungssystemen veröffentlichen.",mqttEnableDescription:"Ereignisse an externen MQTT-Broker veröffentlichen",brokerHostname:"Broker-Hostname",port:"Port",usernameOptional:"Benutzername (optional)",passwordOptional:"Passwort (optional)",topicPrefix:"Topic-Präfix",topicPrefixHint:"Topics werden sein: {{prefix}}/printers/<serial>/status, etc.",prometheusMetrics:"Prometheus-Metriken",prometheusEndpointDescription:"Druckermetriken unter <code>/api/v1/metrics</code> für Prometheus/Grafana-Überwachung bereitstellen.",bearerTokenOptional:"Bearer-Token (optional)",bearerTokenHint:"Wenn gesetzt, müssen Anfragen <code>Authorization: Bearer <token></code> enthalten",metricsConnectionStatus:"Verbindungsstatus",metricsPrinterState:"Druckerstatus (idle/printing/etc)",metricsPrintProgress:"Druckfortschritt 0-100%",metricsBedTemp:"Betttemperatur",metricsNozzleTemp:"Düsentemperatur",metricsPrintsTotal:"Gesamtdrucke nach Ergebnis",metricsMore:"...und mehr (Schichten, Lüfter, Warteschlange, Filamentverbrauch)",smartPlugsDescription:"Smart Plugs (Tasmota oder Home Assistant) verbinden, um Stromsteuerung zu automatisieren und Energieverbrauch für Ihre Drucker zu verfolgen.",allOn:"Alle Ein",allOff:"Alle Aus",addSmartPlug:"Smart Plug hinzufügen",energySummary:"Energieübersicht",currentPower:"Aktuelle Leistung",plugsOnline:"{{reachable}}/{{total}} Plugs online",today:"Heute",yesterday:"Gestern",total:"Gesamt",enablePlugsForSummary:"Plugs aktivieren, um Energieübersicht zu sehen",addNotificationProvider:"Hinzufügen",systemBadge:"(System)",creating:"Erstellen...",changing:"Ändern...",deleteUserAndItems:"Benutzer UND dessen Elemente löschen",deleteUserKeepItems:"Benutzer löschen, Elemente behalten (werden herrenlos)",ok:"OK",twoFa:{totpTitle:"Authenticator-App (TOTP)",totpDesc:"Verwende eine Authenticator-App wie Google Authenticator, Aegis oder Authy.",emailOtpTitle:"E-Mail OTP",emailOtpDesc:"Sende einen Einmalcode an {{email}} beim Einloggen.",emailOtpNoEmail:"Füge eine E-Mail-Adresse zu deinem Konto hinzu, um diese Methode zu aktivieren.",addEmailFirst:"Dein Konto hat keine E-Mail-Adresse. Bitte einen Administrator, eine hinzuzufügen.",setupTotp:"Authenticator-App einrichten",setupAuthApp:"Authenticator-App einrichten",setupInstructions:"Scanne den QR-Code mit deiner Authenticator-App und bestätige mit einem Code.",manualEntry:"Kein Scanner? Gib dieses Secret manuell ein:",scannedContinue:"Code gescannt — weiter",enterCodeToConfirm:"Gib den 6-stelligen Code aus deiner Authenticator-App ein, um die Einrichtung zu bestätigen.",activate:"Aktivieren",disableTotp:"Authenticator deaktivieren",disableConfirmHint:"Gib einen gültigen TOTP-Code oder einen Backup-Code ein, um den Authenticator zu deaktivieren.",totpDisabled:"Authenticator-App deaktiviert.",emailOtpEnabled:"E-Mail OTP aktiviert.",emailOtpDisabled:"E-Mail OTP deaktiviert.",smtpRequired:"Bitte konfigurieren und testen Sie zuerst die SMTP-Einstellungen.",invalidCode:"Ungültiger Code. Bitte erneut versuchen.",enableEmailOtp:"E-Mail OTP aktivieren",disableEmailOtp:"E-Mail OTP deaktivieren",emailSetupEnterCode:"Ein Bestätigungscode wurde an Ihre E-Mail-Adresse gesendet. Geben Sie ihn unten ein, um zu bestätigen, dass Ihnen dieses Postfach gehört.",verifyAndEnable:"Verifizieren & Aktivieren",emailDisablePasswordHint:"Geben Sie Ihr Kontopasswort ein, um die Deaktivierung des E-Mail OTP zu bestätigen.",passwordPlaceholder:"Passwort eingeben",backupCodesTitle:"Backup-Codes sichern",backupCodesWarning:"Speichere diese Codes sicher. Jeder Code kann nur einmal verwendet werden und wird nicht erneut angezeigt.",backupCodesRemaining:"{{count}} Backup-Codes verbleibend",savedCodes:"Codes gespeichert",regenBackup:"Backup-Codes neu generieren",regenBackupHint:"Gib deinen aktuellen TOTP-Code ein, um 10 neue Backup-Codes zu generieren. Alle bestehenden Codes werden ungültig.",newBackupCodes:"Neue Backup-Codes",linkedAccounts:"Verknüpfte SSO-Konten",linkedAccountsDesc:"Diese externen Identitätsanbieter sind mit deinem Konto verknüpft.",oidcUnlinked:"Konto getrennt."},oidc:{title:"SSO / OIDC-Anbieter",desc:"Konfiguriere OpenID Connect-Anbieter für Single Sign-On.",addProvider:"Anbieter hinzufügen",newProvider:"Neuer Anbieter",empty:"Noch keine OIDC-Anbieter konfiguriert.",created:"Anbieter erstellt.",updated:"Anbieter aktualisiert.",deleted:"Anbieter gelöscht.",refreshIcon:"Icon neu laden",removeIcon:"Icon entfernen",iconRefreshed:"Icon aktualisiert.",iconRemoved:"Icon entfernt.",iconFetchFailed:"Icon konnte von der Anbieter-URL nicht geladen werden.",deleteTitle:"Anbieter löschen",deleteMessage:'"{{name}}" löschen? Alle verknüpften Benutzerkonten werden getrennt.',form:{name:"Anzeigename",issuerUrl:"Aussteller-URL",clientId:"Client-ID",clientSecret:"Client-Secret",scopes:"Bereiche",iconUrl:"Symbol-URL (optional)",enabled:"Aktiviert",autoCreate:"Benutzer automatisch anlegen",autoCreateDesc:"Erstellt beim ersten Login automatisch ein lokales Konto.",autoLink:"Bestehende Konten automatisch verknüpfen",autoLinkDesc:"Verknüpft beim ersten Login vorhandene lokale Konten anhand der E-Mail-Adresse.",secretHint:"leer lassen zum Beibehalten",secretPlaceholder:"neues Secret",emailClaim:"E-Mail-Claim",emailClaimDesc:"JWT-Claim für die E-Mail-Identität. Für Azure Entra ID 'preferred_username' oder 'upn' verwenden (sendet kein email_verified). Nur vertrauenswürdige Claim-Namen verwenden.",emailClaimPlaceholder:"E-Mail",emailClaimCustomClaimAutoLinkWarning:"Benutzerdefinierte Claims sind für die Auto-Verknüpfung nur sicher, wenn der Wert vom Mandanten verwaltet wird (z. B. Azure Entra ID upn / preferred_username). Aktiviere Auto-Verknüpfung nicht, wenn dein IdP Benutzern erlaubt, diesen Claim selbst zu setzen.",requireEmailVerified:"E-Mail-Verifizierung erforderlich",requireEmailVerifiedDesc:"E-Mail-Claim nur akzeptieren, wenn der Provider ihn als verifiziert markiert.",requireEmailVerifiedWarning:"Warnung: E-Mail wird auch ohne Verifizierung akzeptiert. Nur bei vertrauenswürdigen Providern verwenden.",requireEmailVerifiedAutoLink:"Auto-Verknüpfung zuerst deaktivieren, um diese Einstellung zu ändern.",defaultGroup:"Standardgruppe",defaultGroupDesc:"Gruppe, der automatisch erstellte Benutzer zugewiesen werden. Fallback auf Viewers, wenn nicht gesetzt.",defaultGroupViewersFallback:"Viewers (Standard)"}},encryption:{title:"MFA-Verschlüsselungsstatus",enabledFromEnv:"At-Rest-Verschlüsselung aktiv (Schlüssel aus Umgebungsvariable MFA_ENCRYPTION_KEY)",enabledFromFile:"At-Rest-Verschlüsselung aktiv (Schlüssel aus dem Datenverzeichnis geladen)",enabledGenerated:"At-Rest-Verschlüsselung aktiv mit automatisch generiertem Schlüssel",notConfigured:"At-Rest-Verschlüsselung nicht konfiguriert",notConfiguredDesc:"TOTP-Geheimnisse und OIDC-Client-Secrets werden im Klartext gespeichert. Setze MFA_ENCRYPTION_KEY oder starte Bambuddy mit beschreibbarem Datenverzeichnis neu, damit ein Schlüssel automatisch erzeugt wird.",allEncrypted:"Alle MFA-Geheimnisse sind verschlüsselt gespeichert.",legacyRowsLabel:"Klartext-Zeilen (Altbestand)",encryptedRowsLabel:"Verschlüsselte Zeilen",legacyRowsWarning:"{{count}} Klartext-Zeile(n) erkannt. Den OIDC-Provider neu speichern oder den Authenticator des Benutzers neu einrichten, um die Daten verschlüsselt abzulegen.",backupHint:"Der automatisch erzeugte Schlüssel liegt unter DATA_DIR/.mfa_encryption_key und wird in lokalen Backup-ZIPs mitgesichert. Backups sicher aufbewahren oder MFA_ENCRYPTION_KEY explizit setzen.",decryptionBrokenTitle:"Verschlüsselungsschlüssel fehlt",decryptionBrokenError:"{{count}} verschlüsselte Datensätze können nicht entschlüsselt werden, weil der Schlüssel nicht mehr verfügbar ist. Den vorherigen MFA_ENCRYPTION_KEY oder DATA_DIR/.mfa_encryption_key wiederherstellen.",migrationErrorWarning:"{{count}} Legacy-Eintrag/Einträge konnten beim Start nicht verschlüsselt werden. Prüfen Sie die Server-Logs und starten Sie Bambuddy neu."}},notification:{printStarted:{title:"Druck gestartet",body:"{{printer}}: {{filename}} wird gedruckt"},printCompleted:{title:"Druck abgeschlossen",body:"{{printer}}: {{filename}} erfolgreich abgeschlossen"},printFailed:{title:"Druck fehlgeschlagen",body:"{{printer}}: {{filename}} ist fehlgeschlagen"},printStopped:{title:"Druck gestoppt",body:"{{printer}}: {{filename}} wurde gestoppt"},printProgress:{title:"Druckfortschritt",body:"{{printer}}: {{filename}} ist zu {{percent}}% abgeschlossen"},printerOffline:{title:"Drucker offline",body:"{{printer}} ist offline"},printerError:{title:"Druckerfehler",body:"{{printer}} – {{error}}"},filamentLow:{title:"Filament niedrig",body:"{{printer}}: Filament geht zur Neige"},maintenanceDue:{title:"Wartung fällig",body:"{{printer}}: {{items}} benötigen Aufmerksamkeit"}},errors:{generic:"Etwas ist schiefgelaufen",networkError:"Netzwerkfehler. Bitte überprüfen Sie Ihre Verbindung.",notFound:"Nicht gefunden",unauthorized:"Nicht autorisiert",serverError:"Serverfehler",validationError:"Bitte überprüfen Sie Ihre Eingabe",printerConnectionFailed:"Verbindung zum Drucker fehlgeschlagen",saveFailed:"Speichern fehlgeschlagen",deleteFailed:"Löschen fehlgeschlagen",loadFailed:"Laden der Daten fehlgeschlagen"},hmsErrors:{title:"Fehler - {{name}}",noErrors:"Keine Fehler",viewOnWiki:"Im Bambu Lab Wiki ansehen",clearInstructions:"Löschen Sie die Fehler am Drucker, um sie hier zu entfernen.",clearErrors:"Fehler löschen",clearSuccess:"HMS-Fehler gelöscht",clearFailed:"HMS-Fehler konnten nicht gelöscht werden"},mqttDebug:{title:"MQTT-Debug-Protokoll",searchPlaceholder:"Topic oder Payload suchen...",noMessages:"Noch keine Nachrichten protokolliert",startLoggingHint:'Klicken Sie auf "Protokollierung starten", um MQTT-Nachrichten aufzuzeichnen',noMessagesMatch:"Keine Nachrichten entsprechen Ihrem Filter",adjustFilterHint:"Versuchen Sie, Ihre Such- oder Filterkriterien anzupassen",incoming:"Eingehend",outgoing:"Ausgehend",loggingStopped:"Protokollierung gestoppt",loggingActive:"Protokollierung aktiv - Nachrichten werden automatisch aktualisiert",startLogging:"Protokollierung starten",stopLogging:"Protokollierung stoppen",clearLog:"Protokoll löschen",topic:"Thema",timestamp:"Zeitstempel",direction:"Richtung",all:"Alle"},printerFiles:{title:"Dateimanager",storageUsed:"Belegt:",storageFree:"Frei:",filterPlaceholder:"Dateien filtern...",deleteButton:"Löschen",deleteFiles:"{{count}} Dateien löschen",deleteFileConfirm:'"{{name}}" löschen? Dies kann nicht rückgängig gemacht werden.',deleteFilesConfirm:"{{count}} ausgewählte Dateien löschen? Dies kann nicht rückgängig gemacht werden.",noFiles:"Keine Dateien auf dem Drucker",loadingFiles:"Dateien werden geladen...",failedToLoad:"Dateien konnten nicht geladen werden",toast:{filesDeleted:"{{count}} Datei(en) gelöscht",deleteFailed:"Löschen fehlgeschlagen: {{error}}"}},confirm:{delete:"Möchten Sie dies wirklich löschen?",unsavedChanges:"Sie haben ungespeicherte Änderungen. Möchten Sie wirklich verlassen?",clearQueue:"Möchten Sie die Warteschlange wirklich leeren?"},login:{title:"Bambuddy Anmeldung",subtitle:"Melden Sie sich bei Ihrem Konto an",username:"Benutzername",usernamePlaceholder:"Benutzername eingeben",usernameOrEmail:"Benutzername oder E-Mail",usernameOrEmailPlaceholder:"Benutzername oder @ E-Mail",password:"Passwort",passwordPlaceholder:"Passwort eingeben",signIn:"Anmelden",signingIn:"Anmeldung läuft...",rememberMe:"Angemeldet bleiben",forgotPassword:"Passwort vergessen?",loginSuccess:"Erfolgreich angemeldet",loginFailed:"Anmeldung fehlgeschlagen",enterCredentials:"Bitte Benutzername und Passwort eingeben",enterEmail:"Bitte geben Sie Ihre E-Mail-Adresse ein",oidcLoginFailed:"OIDC-Anmeldung fehlgeschlagen",oidcErrors:{providerError:"Der Identity-Provider hat einen Fehler zurückgegeben",missingParameters:"Dem OIDC-Callback fehlen erforderliche Parameter",invalidState:"OIDC-State ist ungültig oder wurde bereits verwendet",stateExpired:"OIDC-Sitzung abgelaufen — bitte erneut versuchen",providerNotFound:"OIDC-Provider nicht gefunden",discoveryFailed:"OIDC-Discovery-Dokument konnte nicht abgerufen werden",invalidDiscovery:"OIDC-Discovery-Dokument ist ungültig",networkError:"Netzwerkfehler beim OIDC-Token-Austausch",badResponse:"Unerwartete Antwort beim OIDC-Token-Austausch",noIdToken:"OIDC-Provider hat kein ID-Token zurückgegeben",validationFailed:"OIDC-Token-Validierung fehlgeschlagen",nonceMismatch:"OIDC-Nonce stimmt nicht überein — möglicher Replay-Angriff",missingSubClaim:"OIDC-Token enthält keinen Sub-Claim",noLinkedAccount:"Kein lokales Konto mit dieser OIDC-Identität verknüpft",accountInactive:"Ihr Konto ist inaktiv",userResolutionFailed:"Ihr Konto konnte nicht aufgelöst werden",internalError:"Interner Fehler beim OIDC-Login",tokenExchangeFailed:"OIDC-Token-Austausch fehlgeschlagen"},forgotPasswordTitle:"Passwort vergessen",forgotPasswordMessage:"Wenn Sie Ihr Passwort vergessen haben, wenden Sie sich bitte an Ihren Systemadministrator.",forgotPasswordEmailMessage:"Geben Sie Ihre E-Mail-Adresse ein und wir senden Ihnen ein neues Passwort.",emailAddress:"E-Mail-Adresse",emailPlaceholder:"ihre.email@beispiel.de",cancel:"Abbrechen",sending:"Wird gesendet...",sendResetEmail:"Zurücksetzungs-E-Mail senden",howToReset:"So setzen Sie Ihr Passwort zurück:",resetStep1:"Kontaktieren Sie Ihren Bambuddy-Administrator",resetStep2:"Bitten Sie ihn, Ihr Passwort in der Benutzerverwaltung zurückzusetzen",resetStep3:"Er kann ein neues temporäres Passwort für Sie festlegen",resetStep4:"Melden Sie sich mit dem neuen Passwort an und ändern Sie es in den Einstellungen",gotIt:"Verstanden",resetPassword:{title:"Neues Passwort festlegen",subtitle:"Geben Sie unten Ihr neues Passwort ein und bestätigen Sie es.",newPassword:"Neues Passwort",newPasswordPlaceholder:"Mindestens 8 Zeichen",confirmPassword:"Passwort bestätigen",confirmPasswordPlaceholder:"Neues Passwort wiederholen",saving:"Wird gespeichert…",submit:"Neues Passwort festlegen",backToLogin:"Zurück zur Anmeldung",passwordsDoNotMatch:"Passwörter stimmen nicht überein",passwordTooShort:"Passwort muss mindestens 8 Zeichen lang sein",resetFailed:"Passwort zurücksetzen fehlgeschlagen. Der Link ist möglicherweise abgelaufen."},twoFA:{title:"Zwei-Faktor-Authentifizierung",subtitle:"Ihr Konto ist mit 2FA geschützt. Geben Sie unten den Bestätigungscode ein.",methodAuthenticator:"Authenticator-App",methodEmail:"E-Mail-Code",methodBackup:"Wiederherstellungscode",instructionsTotp:"Öffnen Sie Ihre Authenticator-App und geben Sie den 6-stelligen Code für Bambuddy ein.",instructionsEmail:"Ein 6-stelliger Code wurde an Ihre E-Mail-Adresse gesendet. Er ist 10 Minuten gültig.",instructionsEmailNotSent:"Klicken Sie unten, um einen Bestätigungscode per E-Mail zu erhalten.",instructionsBackup:"Geben Sie einen Ihrer 8-stelligen Wiederherstellungscodes ein. Jeder Code kann nur einmal verwendet werden.",sendCodeButton:"Code per E-Mail senden",sendingCode:"Wird gesendet...",resendCode:"Code erneut senden",codeLabel:"Bestätigungscode",backupCodeLabel:"Wiederherstellungscode",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"Bestätigen",verifyingButton:"Wird überprüft...",backToLogin:"← Zurück zur Anmeldung",orContinueWith:"oder anmelden mit",signInWith:"Anmelden mit {{provider}}",enterCode:"Bitte geben Sie den Bestätigungscode ein",sendCodeFailed:"Bestätigungscode konnte nicht gesendet werden",invalidCode:"Ungültiger Code. Bitte erneut versuchen."}},setup:{title:"Bambuddy Einrichtung",subtitle:"Konfigurieren Sie die Authentifizierung für Ihre Bambuddy-Instanz",enableAuth:"Authentifizierung aktivieren",adminAccount:"Admin-Konto",adminAccountDesc:"Wenn bereits Admin-Benutzer existieren, wird die Authentifizierung mit den vorhandenen Admin-Konten aktiviert. Lassen Sie die Felder unten leer, um vorhandene Admins zu verwenden, oder geben Sie neue Anmeldedaten ein, um einen neuen Admin-Benutzer zu erstellen.",adminUsername:"Admin-Benutzername",adminPassword:"Admin-Passwort",optionalIfAdminExists:"(optional, wenn Admin-Benutzer existieren)",adminUsernamePlaceholder:"Admin-Benutzernamen eingeben (optional)",adminPasswordPlaceholder:"Admin-Passwort eingeben (optional)",confirmPassword:"Passwort bestätigen",confirmPasswordPlaceholder:"Admin-Passwort bestätigen",settingUp:"Einrichtung läuft...",completeSetup:"Einrichtung abschließen",toast:{authEnabledAdminCreated:"Authentifizierung aktiviert und Admin-Benutzer erstellt",authEnabledExistingAdmins:"Authentifizierung mit vorhandenen Admin-Benutzern aktiviert",setupCompleted:"Einrichtung abgeschlossen",enterBothCredentials:"Bitte geben Sie sowohl Admin-Benutzernamen als auch Passwort ein, oder lassen Sie beide leer, um vorhandene Admin-Benutzer zu verwenden",passwordsDoNotMatch:"Passwörter stimmen nicht überein",passwordTooShort:"Passwort muss mindestens 6 Zeichen lang sein"}},changePassword:{title:"Passwort ändern",currentPassword:"Aktuelles Passwort",currentPasswordPlaceholder:"Aktuelles Passwort eingeben",newPassword:"Neues Passwort",newPasswordPlaceholder:"Neues Passwort eingeben (min. 6 Zeichen)",confirmPassword:"Neues Passwort bestätigen",confirmPasswordPlaceholder:"Neues Passwort bestätigen",passwordsDoNotMatch:"Passwörter stimmen nicht überein",passwordTooShort:"Passwort muss mindestens 6 Zeichen lang sein",changing:"Wird geändert...",success:"Passwort erfolgreich geändert",failed:"Passwortänderung fehlgeschlagen"},plateAlert:{title:"Druck pausiert!",message:"Objekte auf dem Druckbett erkannt. Der Druck wurde automatisch pausiert. Bitte räumen Sie das Druckbett und setzen Sie den Druck fort.",understand:"Verstanden"},camera:{title:"Kameraansicht",invalidPrinterId:"Ungültige Drucker-ID",live:"Live",snapshot:"Schnappschuss",restartStream:"Stream neu starten",refreshSnapshot:"Schnappschuss aktualisieren",fullscreen:"Vollbild",exitFullscreen:"Vollbild beenden",connectingToCamera:"Verbinde mit Kamera...",capturingSnapshot:"Schnappschuss wird aufgenommen...",connectionLost:"Verbindung verloren",connectionFailed:"Kameraverbindung fehlgeschlagen",reconnecting:"Neuverbindung in {{countdown}}s... (Versuch {{attempt}}/{{max}})",reconnectNow:"Jetzt verbinden",cameraUnavailable:"Kamera nicht verfügbar",cameraUnavailableDesc:"Stellen Sie sicher, dass der Drucker eingeschaltet und verbunden ist.",noCamera:"Keine Kamera verfügbar",retry:"Erneut versuchen",cameraStream:"Kamera-Stream",zoomOut:"Verkleinern",zoomIn:"Vergrößern",resetZoom:"Zoom zurücksetzen",recording:"Aufnahme",startRecording:"Aufnahme starten",stopRecording:"Aufnahme stoppen",chamberLight:"Kammerbeleuchtung umschalten",unavailable:"Kamera nicht verfügbar",diagnose:{button:"Diagnose",modalTitle:"Kamera-Diagnose",running:"Diagnose läuft...",runFailed:"Diagnose konnte nicht ausgeführt werden: {{error}}",retry:"Erneut ausführen",stage:{tcp_reachable:"Netzwerk-Erreichbarkeit",first_frame:"Bilderfassung",live_stream_active:"Live-Stream aktiv"},summary:{all_ok:"Kamera funktioniert. Die Diagnose hat alle Phasen erfolgreich abgeschlossen.",live_stream_active_healthy:"Kamera streamt gerade mit aktuellen Bildern — kein Test nötig.",printer_unreachable:"Drucker ist nicht erreichbar. Prüfe IP-Adresse, Netzwerkverbindung und ob der Drucker eingeschaltet ist.",camera_port_closed:"Drucker ist erreichbar, aber der Kamera-Port ist geschlossen. Stelle sicher, dass LAN-Modus und Entwicklermodus in den Druckereinstellungen aktiviert sind.",no_frame:"Verbindung zur Kamera hergestellt, aber keine Bilder empfangen. Versuche es erneut oder prüfe, ob die Kamera in den Druckereinstellungen aktiviert ist.",unknown_failure:"Kamera-Diagnose aus unbekanntem Grund fehlgeschlagen. Prüfe das Support-Log für Details."},meta:{protocol:"Protokoll",port:"Port",profile:"Profil"}}},groups:{title:"Gruppenverwaltung",subtitle:"Berechtigungsgruppen für Zugriffskontrolle verwalten",backToSettings:"Zurück zu Einstellungen",createGroup:"Gruppe erstellen",noPermission:"Sie haben keine Berechtigung, auf diese Seite zuzugreifen.",system:"System",noDescription:"Keine Beschreibung",usersCount:"{{count}} Benutzer",permissionsCount:"{{count}} Berechtigungen",edit:"Bearbeiten",delete:"Löschen",toast:{created:"Gruppe erfolgreich erstellt",updated:"Gruppe erfolgreich aktualisiert",deleted:"Gruppe erfolgreich gelöscht",enterGroupName:"Bitte geben Sie einen Gruppennamen ein"},modal:{editGroup:"Gruppe bearbeiten",createGroup:"Gruppe erstellen",cancel:"Abbrechen",saving:"Speichern...",creating:"Erstellen...",saveChanges:"Änderungen speichern"},form:{groupName:"Gruppenname",groupNamePlaceholder:"Gruppennamen eingeben",systemGroupWarning:"Systemgruppennamen können nicht geändert werden",description:"Beschreibung",descriptionPlaceholder:"Beschreibung eingeben (optional)",permissions:"Berechtigungen ({{count}} ausgewählt)"},deleteModal:{title:"Gruppe löschen",message:"Sind Sie sicher, dass Sie diese Gruppe löschen möchten? Benutzer in dieser Gruppe verlieren diese Berechtigungen.",confirm:"Gruppe löschen"},editor:{title:"Gruppe bearbeiten",createTitle:"Gruppe erstellen",search:"Berechtigungen suchen...",selectAll:"Alle auswählen",clearAll:"Alle abwählen",permissionsSelected:"{{count}} ausgewählt",noResults:"Keine Berechtigungen entsprechen Ihrer Suche"}},users:{title:"Benutzerverwaltung",subtitle:"Benutzer und deren Zugriff auf Ihre Bambuddy-Instanz verwalten",backToSettings:"Zurück zu Einstellungen",createUser:"Benutzer erstellen",noPermission:"Sie haben keine Berechtigung, auf diese Seite zuzugreifen.",admin:"Admin",noGroups:"Keine Gruppen",active:"Aktiv",inactive:"Inaktiv",edit:"Bearbeiten",delete:"Löschen",system:"System",noGroupsAvailable:"Keine Gruppen verfügbar",table:{username:"Benutzername",groups:"Gruppen",status:"Status",actions:"Aktionen"},toast:{created:"Benutzer erfolgreich erstellt",updated:"Benutzer erfolgreich aktualisiert",deleted:"Benutzer erfolgreich gelöscht",fillRequired:"Bitte füllen Sie alle Pflichtfelder aus",passwordsDoNotMatch:"Passwörter stimmen nicht überein",passwordTooShort:"Passwort muss mindestens 6 Zeichen lang sein",ldapProvisioned:'LDAP-Benutzer „{{username}}" bereitgestellt'},modal:{createUser:"Benutzer erstellen",editUser:"Benutzer bearbeiten",cancel:"Abbrechen",creating:"Erstellen...",saving:"Speichern...",saveChanges:"Änderungen speichern",advancedAuthSubtitle:"mit erweiterter Authentifizierung",tabsAriaLabel:"Benutzerquelle",localTab:"Lokal",ldapTab:"LDAP",ldapSearchLabel:"Verzeichnis durchsuchen",ldapSearchPlaceholder:"Benutzername, Name oder E-Mail eingeben...",ldapMinChars:"Mindestens 2 Zeichen für die Suche eingeben",ldapTypeToSearch:"Tippen, um das LDAP-Verzeichnis zu durchsuchen",ldapSearching:"Verzeichnis wird durchsucht...",ldapNoResults:"Keine passenden Benutzer im Verzeichnis",ldapSearchError:"Verzeichnissuche fehlgeschlagen. Bitte LDAP-Server-Status prüfen.",ldapAlreadyProvisioned:"Bereits bereitgestellt",ldapSelectedLabel:"Ausgewählt",ldapProvision:"Benutzer bereitstellen",ldapProvisioning:"Wird bereitgestellt...",ldapErrorProvision:"Bereitstellung fehlgeschlagen. Bitte LDAP-Server-Status prüfen und erneut versuchen."},form:{username:"Benutzername",usernamePlaceholder:"Benutzernamen eingeben",email:"E-Mail",emailPlaceholder:"benutzer@beispiel.de",password:"Passwort",passwordPlaceholder:"Passwort eingeben",confirmPassword:"Passwort bestätigen",confirmPasswordPlaceholder:"Passwort bestätigen",newPasswordPlaceholder:"Neues Passwort eingeben",confirmNewPasswordPlaceholder:"Neues Passwort bestätigen",leaveBlankToKeep:"leer lassen, um das aktuelle zu behalten",groups:"Gruppen",optional:"optional",autoGeneratedPassword:"Ein sicheres Passwort wird automatisch generiert und per E-Mail an den Benutzer gesendet.",passwordManagedByAdvancedAuth:'Das Passwort wird durch erweiterte Authentifizierung verwaltet. Verwenden Sie "Passwort zurücksetzen", um ein neues Passwort per E-Mail an den Benutzer zu senden.',resetPassword:"Passwort zurücksetzen",resettingPassword:"Passwort wird zurückgesetzt..."},deleteModal:{title:"Benutzer löschen",message:"Sind Sie sicher, dass Sie diesen Benutzer löschen möchten? Diese Aktion kann nicht rückgängig gemacht werden.",confirm:"Benutzer löschen"}},streamOverlay:{title:"Stream-Overlay",invalidPrinterId:"Ungültige Drucker-ID",cameraStream:"Kamera-Stream",progress:"Fortschritt",eta:"ETA",printerIdle:"Drucker ist inaktiv",printerOffline:"Drucker offline",status:{printing:"Druckt",paused:"Pausiert",finished:"Fertig",failed:"Fehlgeschlagen",idle:"Inaktiv",unknown:"Unbekannt"}},profiles:{title:"Profile",subtitle:"Verwalten Sie Ihre Slicer-Voreinstellungen und Druckvorschub-Kalibrierungen",tabs:{bambuCloud:"Bambu Cloud",orcaCloud:"Orca Cloud",local:"Lokale Profile",kprofiles:"K-Profile"},orcaCloud:{connectedAs:"Verbunden als",logout:"Trennen",noLogoutPermission:"Sie haben keine Berechtigung zum Trennen",noConnectPermission:"Sie haben keine Berechtigung, sich mit Orca Cloud zu verbinden",retry:"Erneut versuchen",back:"Andere Anmeldemethode verwenden",connect:{title:"Mit Orca Cloud verbinden",description:"Melden Sie sich bei Ihrem Orca Cloud-Konto an, um Ihre Slicer-Profile in Bambuddy zu synchronisieren."},providers:{google:"Mit Google anmelden",apple:"Mit Apple anmelden",github:"Mit GitHub anmelden",email:"Mit E-Mail und Passwort anmelden"},password:{title:"Mit E-Mail und Passwort anmelden",email:"E-Mail",emailPlaceholder:"sie@beispiel.de",password:"Passwort",submit:"Anmelden"},paste:{title:"Anmeldung abschließen",step1:"Ein neuer Tab wurde mit der Orca Cloud-Anmeldeseite geöffnet. Melden Sie sich mit Ihrem Orca-Konto an.",step2:'Ihr Browser wird zu einer "localhost"-URL umgeleitet, die nicht geladen werden kann. Das ist normal — die URL ist es, was wir brauchen.',step3:"Kopieren Sie die gesamte URL aus der Adressleiste Ihres Browsers und fügen Sie sie unten ein.",signInUrl:"Falls sich der Anmelde-Tab nicht geöffnet hat, klicken Sie auf diese URL:",label:"Callback-URL hier einfügen",placeholder:"http://localhost:41172/callback?code=...&state=...",submit:"Verbindung abschließen"},profiles:{title:"Ihre Orca Cloud-Profile ({{count}})",refresh:"Aktualisieren",empty:"Noch keine Profile in Ihrem Orca Cloud-Konto gefunden."},toast:{connected:"Mit Orca Cloud verbunden als {{email}}",disconnected:"Verbindung zu Orca Cloud getrennt"},errors:{startFailed:"Anmeldevorgang für Orca Cloud konnte nicht gestartet werden.",finishFailed:"Orca Cloud-Anmeldung konnte nicht abgeschlossen werden.",passwordFailed:"Anmeldung mit dieser E-Mail und diesem Passwort fehlgeschlagen.",passwordEmpty:"Bitte geben Sie sowohl E-Mail als auch Passwort ein.",emptyPaste:"Bitte fügen Sie die Callback-URL aus Ihrem Browser ein.",noCode:"Diese URL sieht nicht wie ein Orca Cloud-Callback aus (kein code-Parameter). Kopieren Sie die vollständige URL aus der Adressleiste."}},localProfiles:{title:"Lokale Profile",subtitle:"Slicer-Voreinstellungen aus OrcaSlicer importieren und verwalten",import:"Profile importieren",importDesc:".bbscfg-, .bbsflmt-, .orca_filament-, .zip- oder .json-Dateien hier ablegen",importing:"Importiere...",search:"Lokale Voreinstellungen durchsuchen...",noPresets:"Noch keine lokalen Voreinstellungen",noSearchResults:"Keine Voreinstellungen entsprechen deiner Suche",badge:"Lokal",edit:"Bearbeiten",delete:"Löschen",cancel:"Abbrechen",deleteConfirmTitle:"Voreinstellung löschen",deleteConfirm:"Möchten Sie diese Voreinstellung wirklich löschen? Dies kann nicht rückgängig gemacht werden.",source:"Quelle",inheritsFrom:"Erbt von",filamentType:"Typ",vendor:"Hersteller",compatiblePrinters:"Drucker",nozzleTemp:"Düsentemperatur",cost:"Kosten",density:"Dichte",pressureAdvance:"Druckvorschub",filament:"Filament",process:"Prozess",printer:"Drucker",toast:{importSuccess:"{{count}} Voreinstellung(en) importiert",importSkipped:"{{count}} Voreinstellung(en) übersprungen (Duplikate)",importError:"{{count}} Fehler beim Import",deleted:"Voreinstellung gelöscht",updated:"Voreinstellung aktualisiert"}},connectedAs:"Verbunden als",logout:"Abmelden",noLogoutPermission:"Sie haben keine Berechtigung zum Abmelden",failedToLoad:"Profile konnten nicht geladen werden",retry:"Erneut versuchen",time:{justNow:"Gerade eben",minsAgo:"vor {{count}}m",hoursAgo:"vor {{count}}h",daysAgo:"vor {{count}}d"},toast:{loggedOut:"Abgemeldet"},login:{title:"Mit Bambu Cloud verbinden",subtitle:"Synchronisieren Sie Ihre Slicer-Voreinstellungen geräteübergreifend",email:"E-Mail",password:"Passwort",region:"Region",regionGlobal:"Global",regionChina:"China",verificationCode:"Bestätigungscode",totpCode:"Authenticator-Code",checkEmail:"Prüfen Sie Ihre E-Mail ({{email}}) für einen 6-stelligen Code",enterTotpHint:"Geben Sie den 6-stelligen Code aus Ihrer Authenticator-App ein",accessToken:"Zugriffstoken",accessTokenHint:"Fügen Sie Ihr Bambu-Cloud-Zugriffstoken ein. Konten der Region China müssen diesen Weg nutzen (telefonnummerngebunden — kein E-Mail-Login). Im Wiki steht, wie Sie das Token aus den MakerWorld-Cookies auslesen.",back:"Zurück",loginButton:"Anmelden",verifyButton:"Bestätigen",setTokenButton:"Token setzen",useToken:"Stattdessen Zugriffstoken verwenden",useEmail:"Stattdessen mit E-Mail anmelden",toast:{loggedIn:"Erfolgreich angemeldet",codeSent:"Bestätigungscode an Ihre E-Mail gesendet",enterTotp:"Geben Sie den Code aus Ihrer Authenticator-App ein",tokenSet:"Token erfolgreich gesetzt"}},presets:{myPreset:"Mein Profil (bearbeitbar)",duplicate:"Duplizieren",editable:"Bearbeitbar",failedToLoadDetails:"Profil-Details konnten nicht geladen werden",deleteConfirm:"Dieses Profil löschen?",deleteWarning:'"{{name}}" wird dauerhaft aus Bambu Cloud gelöscht. Dies kann nicht rückgängig gemacht werden.',noDuplicatePermission:"Sie haben keine Berechtigung zum Duplizieren von Profilen",noEditPermission:"Sie haben keine Berechtigung zum Bearbeiten von Profilen",noDeletePermission:"Sie haben keine Berechtigung zum Löschen von Profilen",types:{filament:"Filament-Profil",printer:"Drucker-Profil",process:"Prozess-Profil"},toast:{deleted:"Profil gelöscht",created:"Profil erstellt",updated:"Profil aktualisiert",duplicated:"Profil dupliziert",fieldAdded:'Feld "{{key}}" hinzugefügt',exported:"Profil exportiert"},baseLabel:"Basis: {{name}}",currentLabel:"Aktuell: {{name}}",newPreset:"Neues Profil",editPreset:"Profil bearbeiten",duplicatePreset:"Profil duplizieren",createNewPreset:"Neues Profil erstellen",customizeSettings:"Passen Sie die Einstellungen für Ihr neues Profil an",compareWithBase:"Mit Basis-Profil vergleichen",compare:"Vergleichen",basePreset:"Basis-Profil",selectBasePreset:"Basis-Profil auswählen...",presetName:"Profilname",myCustomPreset:"Mein eigenes Profil",inheritsFrom:"Erbt von",dropJsonToImport:"JSON zum Importieren ablegen",tabs:{common:"Allgemein",allFields:"Alle Felder"},availableFields:"Verfügbare Felder",searchFieldsPlaceholder:"Felder suchen...",noMatchingFields:"Keine passenden Felder",allFieldsAdded:"Alle Felder hinzugefügt",addCustomField:"Eigenes Feld hinzufügen",yourOverrides:"Ihre Überschreibungen",noOverridesYet:"Noch keine Überschreibungen",clickFieldsToAdd:"Klicken Sie links auf Felder, um sie hinzuzufügen",saveAsTemplate:"Als Vorlage speichern",jsonTip:"Tipp: Ziehen Sie eine .json-Datei auf dieses Fenster, um Einstellungen zu importieren"},cloudView:{searchPlaceholder:"Profile suchen...",templates:"Vorlagen",refresh:"Aktualisieren",newPreset:"Neues Profil",clearFilters:"Filter zurücksetzen",compareMode:"Vergleichsmodus",selectAnotherPreset:"Wählen Sie ein weiteres {{type}}-Profil",clickTwoPresets:"Klicken Sie auf zwei Profile des gleichen Typs zum Vergleichen",selectFirst:"1. Erstes auswählen",selectSecond:"2. Zweites auswählen",compareNow:"Jetzt vergleichen",lastSynced:"Zuletzt synchronisiert:",showingCount:"{{showing}} von {{total}} Profilen",noPresetsFound:"Keine Profile gefunden",columns:{filament:"Filament",process:"Prozess",printer:"Drucker"},noFilamentPresets:"Keine Filament-Profile",noProcessPresets:"Keine Prozess-Profile",noPrinterPresets:"Keine Drucker-Profile",filters:{type:"Typ",owner:"Besitzer",printer:"Drucker",nozzle:"Düse",filament:"Filament",layer:"Schicht",all:"Alle",myPresets:"Meine Profile",builtIn:"Voreingestellt",process:"Prozess"},noTemplatesPermission:"Sie haben keine Berechtigung, Vorlagen zu verwalten",noRefreshPermission:"Sie haben keine Berechtigung, Profile zu aktualisieren",noCreatePermission:"Sie haben keine Berechtigung, Profile zu erstellen"},templates:{title:"Schnellvorlagen",noTemplates:"Noch keine Vorlagen",createFirst:"Erstellen Sie Vorlagen aus dem Preset-Editor",typeFilter:"Typ:",deleteTitle:"Vorlage löschen",deleteWarning:"Diese Aktion kann nicht rückgängig gemacht werden",deleteConfirm:'Möchten Sie "{{name}}" wirklich löschen?',namePlaceholder:"Vorlagenname",descriptionPlaceholder:"Beschreibung",settingsJson:"Einstellungen (JSON)",fieldsCount:"{{count}} Felder",shownInModals:"In Dialogen angezeigt",hiddenInModals:"In Dialogen ausgeblendet",apply:"Anwenden",toast:{deleted:"Vorlage gelöscht",updated:"Vorlage aktualisiert",created:"Vorlage erstellt",applied:"Vorlage angewendet"}}},support:{debugLoggingActive:"Debug-Protokollierung ist aktiv",manageLogs:"Verwalten",collectItem7:"Drucker-Verbindungsstatus und Firmware-Versionen",collectItem8:"Integrationsstatus (Spoolman, MQTT, HA)",collectItem9:"Netzwerkschnittstellen (nur Subnetze)",collectItem10:"Python-Paketversionen",collectItem11:"Datenbankzustandsprüfungen",collectItem12:"Docker-Umgebungsdetails",bundleGenerating:"Bundle wird erstellt...",bundleStepConnection:"Drucker-Verbindungsprüfungen werden ausgeführt",bundleStepVirtualPrinters:"Setup-Prüfungen für virtuelle Drucker werden ausgeführt",bundleStepLogScan:"Aktuelle Protokolle werden auf bekannte Probleme überprüft",bundleStepBuild:"Support-Bundle-ZIP wird erstellt"},fileManager:{title:"Dateimanager",subtitle:"Organisieren und verwalten Sie Ihre Druckdateien",uploadFiles:"Dateien hochladen",newFolder:"Neuer Ordner",folderName:"Ordnername",folderNamePlaceholder:"z.B. Funktionsteile",renameFile:"Datei umbenennen",renameFolder:"Ordner umbenennen",invalidFilenameChar:'Das Zeichen "{{char}}" ist in Druck-Dateinamen nicht erlaubt. Die SD-Karte des Druckers lehnt folgende Zeichen ab: < > : " / \\ | ? *',moveFiles:"{{count}} Datei(en) verschieben",rootNoFolder:"Stammverzeichnis (Kein Ordner)",current:"aktuell",linkFolder:"Ordner verknüpfen",linkFolderDescription:'"{{name}}" mit einem Projekt oder Archiv verknüpfen für schnellen Zugriff.',project:"Projekt",archive:"Archiv",noProjectsFound:"Keine Projekte gefunden",noArchivesFound:"Keine Archive gefunden",unlink:"Verknüpfung aufheben",link:"Verknüpfen",dragDropFiles:"Dateien hierher ziehen",dropFilesHere:"Dateien hier ablegen",orClickToBrowse:"oder klicken zum Durchsuchen",allFileTypesSupported:"Alle Dateitypen werden unterstützt. ZIP-Dateien werden extrahiert.",zipFilesDetected:"ZIP-Dateien erkannt",zipExtractOptions:"ZIP-Dateien werden extrahiert. Wählen Sie, wie die Ordnerstruktur behandelt werden soll:",preserveZipStructure:"Ordnerstruktur aus ZIP beibehalten",createFolderFromZip:"Ordner aus ZIP-Dateiname erstellen",stlThumbnailGeneration:"STL-Vorschaubildgenerierung",zipMayContainStl:"ZIP-Dateien können STL-Dateien enthalten. Vorschaubilder können während der Extraktion generiert werden.",thumbnailsCanBeGenerated:"Vorschaubilder können für STL-Dateien generiert werden. Große Modelle benötigen möglicherweise mehr Zeit.",generateThumbnailsForStl:"Vorschaubilder für STL-Dateien generieren",threemfDetected:"3MF-Dateien erkannt",threemfExtractionInfo:"Druckermodell, Material, Farbe und Druckeinstellungen werden automatisch aus 3MF-Dateien extrahiert.",willBeExtracted:"Wird extrahiert",filesExtracted:"{{count}} Dateien extrahiert",uploadComplete:"Upload abgeschlossen: {{succeeded}} erfolgreich",uploadFailed:"Hochladen fehlgeschlagen",zipFilesFailed:"{{count}} Dateien fehlgeschlagen",uploading:"Hochladen...",changeLink:"Verknüpfung ändern...",linkTo:"Verknüpfen mit...",linkToProjectOrArchive:"Mit Projekt oder Archiv verknüpfen",addToQueue:"Zur Warteschlange",schedulePrint:"Planen",generateThumbnail:"Vorschaubild generieren",generateThumbnails:"Vorschaubilder generieren",generateThumbnailsForMissing:"Vorschaubilder für STL-Dateien ohne Vorschau generieren",gridView:"Rasteransicht",listView:"Listenansicht",lowDiskSpaceWarning:"Warnung: Wenig Speicherplatz",lowDiskSpaceDetails:"Nur {{free}} frei von {{total}} gesamt. Schwellenwert ist auf {{threshold}} GB eingestellt.",files:"Dateien",folders:"Ordner",size:"Größe",free:"Frei",allFiles:"Alle Dateien",allExternal:"Extern",externalIsEmpty:"Keine externen Dateien",externalEmptyDescription:"Dateien aus deinen verknüpften externen Ordnern erscheinen hier.",wrap:"Umbrechen",enableTextWrapping:"Textumbruch aktivieren",disableTextWrapping:"Textumbruch deaktivieren",collapse:"Einklappen",collapseFoldersByDefault:"Ordner standardmäßig einklappen",expandFoldersByDefault:"Ordner standardmäßig ausklappen",dragToResizeTooltip:"Ziehen zum Ändern der Größe, Doppelklick zum Zurücksetzen",searchFiles:"Dateien suchen...",allTypes:"Alle Typen",prints:"Drucke",ascending:"Aufsteigend",descending:"Absteigend",resultsCount:"{{showing}} von {{total}} Dateien",selectAll:"Alle auswählen",deselectAll:"Auswahl aufheben",selected:"{{count}} ausgewählt",adding:"Hinzufügen...",loadingFiles:"Dateien werden geladen...",folderIsEmpty:"Ordner ist leer",noFilesYet:"Noch keine Dateien",folderEmptyDescription:"Laden Sie Dateien hoch oder verschieben Sie Dateien in diesen Ordner.",noFilesDescription:"Laden Sie Dateien hoch, um Ihre Druckdateien zu organisieren.",noMatchingFiles:"Keine passenden Dateien",noMatchingFilesDescription:"Keine Dateien entsprechen Ihren aktuellen Such- oder Filterkriterien.",clearFilters:"Filter zurücksetzen",printedCount:"{{count}}x gedruckt",uploadedBy:"Hochgeladen von",deleteFolder:"Ordner löschen",deleteFile:"Datei löschen",deleteFilesCount:"{{count}} Dateien löschen",deleteFolderConfirm:"Möchten Sie diesen Ordner wirklich löschen? Alle Dateien darin werden ebenfalls gelöscht.",deleteFileConfirm:"Möchten Sie diese Datei wirklich löschen?",deleteFilesConfirm:"Möchten Sie {{count}} ausgewählte Dateien wirklich löschen? Diese Aktion kann nicht rückgängig gemacht werden.",deleting:"Wird gelöscht...",noPermissionRenameFolder:"Sie haben keine Berechtigung, Ordner umzubenennen",noPermissionLinkFolder:"Sie haben keine Berechtigung, Ordner zu verknüpfen",noPermissionDeleteFolder:"Sie haben keine Berechtigung, Ordner zu löschen",noPermissionPrint:"Sie haben keine Berechtigung zum Drucken",noPermissionSlice:"Sie haben keine Berechtigung, Dateien zu slicen",noPermissionAddToQueue:"Sie haben keine Berechtigung, zur Warteschlange hinzuzufügen",noPermissionDownload:"Sie haben keine Berechtigung, Dateien herunterzuladen",noPermissionRenameFile:"Sie haben keine Berechtigung, diese Datei umzubenennen",noPermissionGenerateThumbnail:"Sie haben keine Berechtigung, Vorschaubilder zu generieren",noPermissionDeleteFile:"Sie haben keine Berechtigung, diese Datei zu löschen",noPermissionCreateFolder:"Sie haben keine Berechtigung, Ordner zu erstellen",noPermissionUpload:"Sie haben keine Berechtigung, Dateien hochzuladen",noPermissionMoveFiles:"Sie haben keine Berechtigung, Dateien zu verschieben",noPermissionDeleteFiles:"Sie haben keine Berechtigung, Dateien zu löschen",linkExternal:"Extern verknüpfen",linkExternalFolder:"Externen Ordner verknüpfen",linkExternalFolderDescription:"Ein Host-Verzeichnis (NAS, USB, Netzlaufwerk) in den Dateimanager einbinden. Dateien werden nicht kopiert — sie werden direkt vom Originalpfad gelesen.",externalFolderNamePlaceholder:"z.B. NAS-Drucke",externalPath:"Host-Pfad",externalPathHelp:"Absoluter Pfad zum Verzeichnis auf dem Docker-Host. Muss als Bind-Mount in den Container eingebunden sein.",readOnly:"Nur Lesen",readOnlyHelp:"verhindert Uploads und Löschungen",showHiddenFiles:"Versteckte Dateien anzeigen (Punkt-Dateien)",externalFolder:"Externer Ordner",scanFolder:"Scannen",toast:{folderCreated:"Ordner erstellt",folderDeleted:"Ordner gelöscht",fileDeleted:"Datei gelöscht",filesDeleted:"{{count}} Dateien gelöscht",filesMoved:"Dateien verschoben",folderLinked:"Ordner verknüpft",folderUnlinked:"Ordnerverknüpfung aufgehoben",externalFolderLinked:"Externer Ordner verknüpft und gescannt",folderScanned:"Scan abgeschlossen: {{added}} hinzugefügt, {{removed}} entfernt",addedToQueue:"{{count}} Datei(en) zur Warteschlange hinzugefügt",addedToQueuePartial:"{{added}} Datei(en) hinzugefügt, {{failed}} fehlgeschlagen",failedToAddToQueue:"Fehler beim Hinzufügen: {{error}}",fileRenamed:"Datei umbenannt",folderRenamed:"Ordner umbenannt",thumbnailsGenerated:"{{count}} Vorschaubild(er) generiert",thumbnailsGeneratedPartial:"{{succeeded}} Vorschaubild(er) generiert, {{failed}} fehlgeschlagen",noStlMissingThumbnails:"Keine STL-Dateien ohne Vorschaubild",failedToGenerateThumbnails:"Fehler beim Generieren der Vorschaubilder: {{error}}",thumbnailGenerated:"Vorschaubild generiert",failedToGenerateThumbnail:"Fehler beim Generieren des Vorschaubildes: {{error}}"}},projects:{title:"Projekte",subtitle:"Organisieren und verfolgen Sie Ihre 3D-Druckprojekte",newProject:"Neues Projekt",editProject:"Projekt bearbeiten",deleteProject:"Projekt löschen",projectName:"Projektname",description:"Beschreibung",noProjects:"Noch keine Projekte",noProjectsFiltered:"Keine {{status}} Projekte",noProjectsFilteredHelp:"Sie haben keine {{status}} Projekte. Projekte werden hier angezeigt, wenn sich ihr Status ändert.",createFirst:"Erstellen Sie Ihr erstes Projekt, um verwandte Drucke zu organisieren, den Fortschritt zu verfolgen und Ihre Builds zu verwalten.",createFirstButton:"Erstes Projekt erstellen",create:"Erstellen",files:"Dateien",prints:"Drucke",plates:"Platten",parts:"Teile",lastModified:"Zuletzt geändert",deleteConfirm:"Möchten Sie dieses Projekt wirklich löschen? Archive und Warteschlangenelemente werden getrennt, aber nicht gelöscht.",addFiles:"Dateien hinzufügen",removeFile:"Datei entfernen",viewDetails:"Details anzeigen",namePlaceholder:"z.B. Voron 2.4 Build",descriptionPlaceholder:"Optionale Beschreibung...",urlLabel:"URL",urlPlaceholder:"https://makerworld.com/...",urlInvalid:"URL muss mit http:// oder https:// beginnen",openExternalUrl:"Projekt-URL öffnen",coverImageLabel:"Titelbild",coverImageAlt:"Projekt-Titelbild",coverImageUpload:"Hochladen",coverImageReplace:"Ersetzen",coverImageRemove:"Entfernen",color:"Farbe",targetPlates:"Ziel-Platten",targetPlatesPlaceholder:"z.B. 25",targetPlatesHelp:"Anzahl der Druckaufträge",targetParts:"Ziel-Teile",targetPartsPlaceholder:"z.B. 150",targetPartsHelp:"Benötigte Objekte insgesamt",tagsLabel:"Tags (kommagetrennt)",tagsPlaceholder:"z.B. voron, funktional, geschenk",dueDate:"Fälligkeitsdatum",priority:"Priorität",priorityLow:"Niedrig",priorityNormal:"Normal",priorityHigh:"Hoch",priorityUrgent:"Dringend",statusActive:"Aktiv",statusCompleted:"Abgeschlossen",statusArchived:"Archiviert",done:"Fertig",completed:"abgeschlossen",failed:"fehlgeschlagen",inQueue:"in Warteschlange",noPrintsYet:"Noch keine Drucke",printJobs:"Druckaufträge (Platten)",partsPrinted:"Gedruckte Teile",failedParts:"Fehlgeschlagene Teile",import:"Importieren",export:"Exportieren",importProject:"Projekt importieren",exportAll:"Alle Projekte exportieren",loading:"Projekte werden geladen...",noEditPermission:"Sie haben keine Berechtigung, Projekte zu bearbeiten",noDeletePermission:"Sie haben keine Berechtigung, Projekte zu löschen",noCreatePermission:"Sie haben keine Berechtigung, Projekte zu erstellen",noImportPermission:"Sie haben keine Berechtigung, Projekte zu importieren",noExportPermission:"Sie haben keine Berechtigung, Projekte zu exportieren",toast:{created:"Projekt erstellt",updated:"Projekt aktualisiert",deleted:"Projekt gelöscht",imported:"Projekt importiert",multipleImported:"{{count}} Projekte importiert",importFailed:"Import fehlgeschlagen",exported:"Projekte exportiert (nur Metadaten)"}},projectDetail:{notFound:"Projekt nicht gefunden",backToProjects:"Zurück zu Projekten",export:"Exportieren",exportProject:"Projekt exportieren",noExportPermission:"Sie haben keine Berechtigung, Projekte zu exportieren",noEditPermission:"Sie haben keine Berechtigung, Projekte zu bearbeiten",partOf:"Teil von:",priorityLabel:"Priorität:",noPrints:"Noch keine Drucke in diesem Projekt",status:{active:"Aktiv",completed:"Abgeschlossen",archived:"Archiviert"},priority:{low:"Niedrig",normal:"Normal",high:"Hoch",urgent:"Dringend"},dueDate:{overdue:"Überfällig",today:"Heute fällig",daysLeft:"{{count}} Tage übrig"},progress:{platesProgress:"Platten-Fortschritt",partsProgress:"Teile-Fortschritt",printJobs:"Druckaufträge",parts:"Teile",percentComplete:"{{percent}}% abgeschlossen",remaining:"{{count}} verbleibend"},stats:{printJobs:"Druckaufträge",total:"gesamt",failed:"{{count}} fehlgeschlagen",partsPrinted:"{{count}} Teile gedruckt",printTime:"Druckzeit",filamentUsed:"Filament verbraucht"},cost:{title:"Kostenverfolgung",filamentCost:"Filamentkosten",energy:"Energie",totalCost:"Gesamtkosten",total:"Gesamt",includesBom:"inkl. Stückliste",budget:"Budget",remaining:"Verbleibend"},subProjects:{title:"Unterprojekte ({{count}})"},notes:{title:"Notizen",noEditPermission:"Sie haben keine Berechtigung, Notizen zu bearbeiten",placeholder:"Notizen zu diesem Projekt hinzufügen...",empty:"Noch keine Notizen. Klicken Sie auf Bearbeiten, um Notizen hinzuzufügen."},files:{title:"Dateien",linkFolders:"Ordner aus dem Dateimanager verknüpfen",forQuickAccess:"für schnellen Zugriff auf dieses Projekt.",fileCount:"{{count}} Datei(en)",empty:"Keine Ordner verknüpft. Gehen Sie zum Dateimanager und verknüpfen Sie einen Ordner mit diesem Projekt.",noFiles:"Keine Dateien in diesem Ordner.",print:"Jetzt drucken",addToQueue:"Zur Warteschlange"},bom:{title:"Stückliste",acquired:"{{completed}}/{{total}} beschafft",showAll:"Alle anzeigen",hideDone:"Erledigte ausblenden",addPart:"Teil hinzufügen",noAddPermission:"Sie haben keine Berechtigung, Teile hinzuzufügen",partNamePlaceholder:"Teilename (z.B. M3x8 Schrauben)",partName:"Teilename",qty:"Menge",price:"Preis ({{currency}})",sourcingUrlPlaceholder:"Bezugsquelle-URL (optional)",remarksPlaceholder:"Bemerkungen (optional)",deletePart:"Teil löschen",deleteConfirm:'Möchten Sie "{{name}}" wirklich löschen?',noUpdatePermission:"Sie haben keine Berechtigung, Teile zu aktualisieren",noEditPermission:"Sie haben keine Berechtigung, Teile zu bearbeiten",noDeletePermission:"Sie haben keine Berechtigung, Teile zu löschen",totalCost:"Gesamtkosten:",empty:"Keine Teile in der Stückliste. Fügen Sie Hardware, Elektronik oder andere Komponenten hinzu, um zu verfolgen, was beschafft werden muss."},timeline:{title:"Aktivitätsverlauf",empty:"Noch keine Aktivität."},template:{saveAsTemplate:"Als Vorlage speichern",noCreatePermission:"Sie haben keine Berechtigung, Vorlagen zu erstellen"},queue:{title:"Warteschlange",viewAll:"Alle anzeigen",printing:"{{count}} druckend",queued:"{{count}} in Warteschlange"},prints:{title:"Drucke ({{count}})"},toast:{projectUpdated:"Projekt aktualisiert",partAdded:"Teil hinzugefügt",partRemoved:"Teil entfernt",exportFailed:"Export fehlgeschlagen",projectExported:"Projekt exportiert",templateCreated:"Vorlage erstellt"}},system:{title:"Systeminformationen",version:"Version",uptime:"Laufzeit",cpuUsage:"CPU-Auslastung",memoryUsage:"Speicherauslastung",diskUsage:"Festplattenauslastung",networkInfo:"Netzwerkinformationen",logs:"Protokolle",debugMode:"Debug-Modus",enableDebug:"Debug-Protokollierung aktivieren",disableDebug:"Debug-Protokollierung deaktivieren",downloadLogs:"Protokolle herunterladen",clearLogs:"Protokolle löschen",dockerInfo:"Docker-Info",containerName:"Container-Name",imageName:"Image-Name",platform:"Plattform",architecture:"Architektur"},library:{title:"Filament-Bibliothek",addFilament:"Filament hinzufügen",editFilament:"Filament bearbeiten",deleteFilament:"Filament löschen",vendor:"Hersteller",material:"Material",color:"Farbe",kFactor:"K-Faktor",temperature:"Temperatur",noFilaments:"Keine Filamente in der Bibliothek",deleteConfirm:"Möchten Sie dieses Filament wirklich löschen?",importFromPrinter:"Vom Drucker importieren",exportToFile:"In Datei exportieren"},slice:{title:"Modell slicen",action:"Slicen",actionAll:"Alle {{count}} Plates slicen",actionAllTitle:"Alle Plates in eine einzelne Multi-Plate-Ausgabe slicen (ein Archiv). Die Filamentauswahl gilt für jeden Slot des Projekts.",allPlatesToggle:"Alle {{count}} Plates slicen",slicing:"Slicen…",printer:"Drucker-Profil",process:"Prozess-Profil",filament:"Filament-Profil",filamentSlot:"Filament {{index}} – {{type}}",selectPreset:"— Profil auswählen —",loadingPresets:"Profile werden geladen…",analyzingPlateFilaments:"Plattenfilamente werden analysiert…",analyzingPlateFilamentsHint:"Es wird ein Probeschnitt ausgeführt, um die belegten AMS-Slots dieser Platte zu ermitteln. Wird zwischengespeichert — erneutes Öffnen ist sofort.",previewToast:"{{name}} wird analysiert — {{elapsed}}",previewWithProgress:"{{name}} wird analysiert — {{stage}} ({{percent}}%) — {{elapsed}}",notUsedByPlate:"— wird von dieser Platte nicht verwendet",noPresetsForSlot:"Keine Profile verfügbar",otherPrinters:"Andere Drucker",presetsLoadFailed:"Profile konnten nicht geladen werden. Importiere sie zuerst unter Einstellungen → Profile.",refreshPresets:"Aktualisieren",refreshPresetsTitle:"Profile neu laden — die aktuellen Cloud- und Bundle-Listen abrufen (nach dem Löschen eines Profils in Bambu Studio oder Bambu Handy verwenden)",allPresetsRequired:"Alle Profile müssen ausgewählt sein",bundle:"Slicer-Bundle",bundleNone:"— Keines (Profile einzeln auswählen) —",bundleAllRequired:"Bundle-Prozess und jeder Filament-Slot müssen ausgewählt sein",enqueuing:"Slice-Auftrag wird übermittelt…",queued:"In Warteschlange…",failed:"Slicen fehlgeschlagen. Logs des Slicer-Sidecars prüfen.",startedToast:"{{name}} wird im Hintergrund gesliced…",queuedToast:"Warteschlange: {{name}} — {{elapsed}}",runningToast:"{{name}} wird gesliced — {{elapsed}}",runningWithProgress:"{{name}} – {{stage}} ({{percent}} %) – {{elapsed}}",runningWithProgressMultiPlate:"Plate {{plateIndex}} von {{plateCount}} • {{name}} – {{stage}} ({{percent}} %) – {{elapsed}}",completedToast:"{{name}} wurde gesliced",failedTitle:"Slicen fehlgeschlagen",failedToast:"Slicen von {{name}} fehlgeschlagen: {{detail}}",tier:{local:"Importiert",cloud:"Bambu Cloud",orcaCloud:"Orca Cloud",standard:"Standard"},cloud:{notAuthenticated:"In Bambu Cloud anmelden (Einstellungen → Profile → Bambu Cloud), um deine Cloud-Profile zu sehen.",expired:"Bambu-Cloud-Sitzung abgelaufen — erneut anmelden, um die Cloud-Profile zu aktualisieren.",unreachable:"Bambu Cloud ist gerade nicht erreichbar. Lokale und Standard-Profile funktionieren weiterhin."},orcaCloud:{notAuthenticated:"Bei Orca Cloud anmelden (Profile → Orca Cloud), um Ihre Orca-Profile zu sehen.",expired:"Orca Cloud-Sitzung abgelaufen — erneut anmelden, um die Orca-Profile zu aktualisieren.",unreachable:"Orca Cloud ist derzeit nicht erreichbar. Andere Profile funktionieren weiterhin."},bedType:{label:"Druckbett",auto:"Auto (aus Prozess-Profil)",coolPlate:"Cool Plate",coolPlateSuperTack:"Cool Plate SuperTack",engineering:"Engineering Plate",highTemp:"High Temp Plate",texturedPEI:"Textured PEI Plate",smoothPEI:"Smooth PEI Plate"}},spoolman:{title:"Spoolman-Integration",enabled:"Spoolman aktiviert",url:"Spoolman URL",connected:"Verbunden",disconnected:"Nicht verbunden",testConnection:"Verbindung testen",sync:"Synchronisieren",syncing:"Synchronisiert...",lastSync:"Letzte Synchronisierung",linkToSpoolman:"Mit Spoolman verknüpfen",openInSpoolman:"In Spoolman öffnen",unlinkSpool:"Spule trennen",unlinkConfirmTitle:"Spule entfernen?",unlinkConfirmMessage:"Die Spule wird vom Slot entfernt. Die Spulendaten selbst bleiben unverändert.",selectSpool:"Spule auswählen",noUnlinkedSpools:"Keine nicht zugewiesenen Spulen verfügbar",linkSuccess:"Spule erfolgreich zugewiesen",linkFailed:"Spule konnte nicht zugewiesen werden",unlinkSuccess:"Spule erfolgreich entfernt",unlinkFailed:"Spule konnte nicht entfernt werden",linkedSpool:"Zugewiesene Spule",spoolId:"Spulen-ID",fillSourceLabel:"(Spoolman)",weight:"Gewicht",remaining:"Verbleibend",disableWeightSync:"AMS-Gewichtsschätzung deaktivieren",disableWeightSyncDesc:"Verbleibende Kapazität nicht aus AMS-Schätzungen aktualisieren. Verwenden Sie dies, wenn Sie die Verbrauchserfassung von Spoolman gegenüber den prozentualen AMS-Schätzungen bevorzugen. Neue Spulen verwenden weiterhin die AMS-Schätzung als Anfangsgewicht.",reportPartialUsage:"Teilverbrauch bei fehlgeschlagenen Drucken melden",reportPartialUsageDesc:"Wenn ein Druck fehlschlägt oder abgebrochen wird, den geschätzten Filamentverbrauch bis zu diesem Zeitpunkt basierend auf dem Schichtfortschritt melden."},inventory:{title:"Spulen-Inventar",subtitle:"Verwalten Sie Ihre Spulen",spoolmanMixedContentTitle:"Spoolman lässt sich nicht über HTTPS laden — Browser blockiert gemischte Inhalte",spoolmanMixedContentBody:"Bambuddy wird über HTTPS ausgeliefert (über deinen Reverse-Proxy), aber deine Spoolman-URL ist nach wie vor HTTP. Browser blockieren gemischte Inhalte aus Sicherheitsgründen, daher kann die eingebettete Spoolman-Oberfläche nicht geladen werden. Spoolman muss ebenfalls über HTTPS erreichbar sein.",spoolmanMixedContentFixReverseProxy:"Stelle Spoolman hinter denselben Reverse-Proxy wie Bambuddy (Traefik / Nginx / Caddy) mit HTTPS und aktualisiere die Spoolman-URL in den Einstellungen auf die neue HTTPS-Adresse.",spoolmanMixedContentFixOpenNewTab:"Als Workaround kannst du Spoolman in einem neuen Tab über HTTP öffnen — gemischte Inhalte werden nur innerhalb eingebetteter Frames blockiert, ein eigener Tab funktioniert weiterhin.",spoolmanOpenInNewTab:"Spoolman in neuem Tab öffnen",labels:{title:"Spulen-Etiketten drucken",selectedCount:"{{count}} ausgewählt",pickSpools:"Wählen Sie, für welche Spulen Etiketten gedruckt werden sollen:",searchPlaceholder:"Name, Marke oder #ID suchen",filterByMaterial:"Material:",allMaterials:"Alle",selectVisible:"Alle sichtbaren auswählen ({{count}})",deselectVisible:"Sichtbare abwählen",clearAll:"Alle entfernen",noSpoolsToShow:"Keine Spulen anzuzeigen. Filter anpassen und erneut versuchen.",noMatches:"Keine Spulen entsprechen der aktuellen Suche oder dem Filter.",printOne:"Etikett für diese Spule drucken",printLabels:"Etiketten drucken…",bulkTitle:"Spulen aus den aktuell angezeigten {{count}} zum Etikettieren auswählen",noSpoolsTitle:"Keine Spulen zum Etikettieren",error:"Etiketten konnten nicht erstellt werden: {{msg}}",sortBy:{label:"Sortieren:",id:"Nach ID",color:"Nach Farbe"},templates:{amsHolderSmall:{label:"AMS-Halter — klein (74 × 33 mm)",hint:"Ein Etikett pro Seite; passt zum druckbaren Etikett aus dem MakerWorld-Modell 752566 (AMS-Filament-Etikettenhalter)."},amsHolderLarge:{label:"AMS-Halter — groß (75 × 55 mm)",hint:"Ein Etikett pro Seite; passt zur Kartoneinleger-Variante des AMS-Filament-Etikettenhalters. Genug Platz für Farbprobe, Marke, Material, ID und QR-Code."},box40x30:{label:"Boxetikett (40 × 30 mm)",hint:"Ein Etikett pro Seite; gängige DK/Brother-Rollengröße, ideal für Filament-Beutel und Lager-Etiketten."},box:{label:"Box label (62 × 29 mm)",hint:"Ein Etikett pro Seite; für Brother PT/QL und Dymo-Kleinetiketten dimensioniert."},averyL7160:{label:"Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)",hint:"EU-Bogenformat; 21 Etiketten pro A4-Seite."},avery5160:{label:"Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)",hint:"US-Bogenformat; 30 Etiketten pro Letter-Seite."}}},addSpool:"Spule hinzufügen",copySpool:"Spule kopieren",editSpool:"Spule bearbeiten",material:"Material",selectMaterial:"Material auswählen...",subtype:"Untertyp",brand:"Marke",searchBrand:"Marke suchen...",useCustomBrand:'"{{brand}}" verwenden',useCustomMaterial:"Benutzerdefiniertes Material verwenden: {{material}}",colorName:"Farbname",colorNamePlaceholder:"Jadeweiß, Feuerrot...",color:"Farbe",hexColor:"Hex-Farbe",pickColor:"Benutzerdefinierte Farbe wählen",labelWeight:"Nenngewicht",coreWeight:"Leergewicht der Spule",searchSpoolWeight:"Spulengewicht suchen...",weightUsed:"Verbraucht",currentWeight:"Restgewicht",measuredWeight:"Gemessenes Gewicht",spoolName:"Spule",costPerKg:"Kosten pro kg",storageLocation:"Lagerstandort",storageLocationPlaceholder:"z.B. Regal A, Schublade 1",openInInventory:"Im Inventar öffnen",measuredWeightError:"Das gemessene Gewicht muss zwischen {{min}}g und {{max}}g liegen.",slicerFilament:"Slicer-Filament",slicerFilamentName:"Slicer-Preset-Name",slicerPreset:"Slicer-Preset",searchPresets:"Filament-Presets suchen...",selectedPreset:"Ausgewählt",noPresetsFound:"Keine Presets gefunden",tempOverrides:"Temperatur-Überschreibungen",note:"Notiz",notePlaceholder:"Zusätzliche Notizen zu dieser Spule...",category:"Kategorie",categoryPlaceholder:"z. B. Produktion, Prototyp, Kunde A",categoryNone:"Ohne Kategorie",storageLocationNone:"Kein Lagerort",lowStockThresholdOverride:"Niedrigbestandsschwelle (diese Spule)",lowStockThresholdOverrideHelp:"Leer lassen, um den globalen Schwellenwert ({{global}}%) zu verwenden.",clearRfid:"RFID-Tag löschen",rfidCleared:"RFID-Tag gelöscht",archive:"Archivieren",restore:"Wiederherstellen",noSpools:"Noch keine Spulen. Fügen Sie Ihre erste Spule hinzu.",noAvailableSpools:"Keine Spulen verfügbar. Fügen Sie eine Spule zum Inventar hinzu oder lösen Sie eine aus einem anderen Slot.",kProfiles:"K-Profile",addKProfile:"K-Profil hinzufügen",assignSpool:"Spule zuweisen",unassignSpool:"Zuweisung aufheben",assignSuccess:"Spule zugewiesen und AMS-Slot konfiguriert",assignFailed:"Spulenzuweisung fehlgeschlagen",selectSpool:"Wählen Sie eine Spule für diesen Slot",assigned:"Zugewiesen",assigning:"Wird zugewiesen...",searchSpools:"Spulen suchen...",showAllSpools:"Alle Spulen anzeigen",spoolmanSpools:"Spoolman-Spulen",allMaterials:"Alle Materialien",filterByBrand:"Nach Marke filtern...",showArchived:"Archivierte anzeigen",quickAdd:"Schnellerfassung (Lager)",quantity:"Menge",stock:"Lager",configured:"Konfiguriert",spoolsCreated:"{{count}} Spulen erstellt",spoolsPartiallyCreated:"{{created}} von {{total}} Spulen erstellt (einige fehlgeschlagen)",spoolCreated:"Spule erstellt",spoolUpdated:"Spule aktualisiert",spoolDeleted:"Spule gelöscht",deepLinkSpoolNotFound:"Spule nicht gefunden",deepLinkFetchFailed:"Spule konnte nicht geladen werden — bitte erneut versuchen",spoolArchived:"Spule archiviert",spoolRestored:"Spule wiederhergestellt",kProfileSaveFailed:"K-Profil-Einstellungen konnten nicht gespeichert werden",syncWeightSpoolNotFound:"Spule nicht gefunden — sie wurde möglicherweise gelöscht",syncWeightSpoolmanUnreachable:"Spoolman ist nicht erreichbar — bitte später erneut versuchen",syncWeightFailed:"Gewicht konnte nicht synchronisiert werden",spoolmanUnreachable:"Spoolman ist nicht erreichbar — bitte später erneut versuchen",deleteSpoolNotFound:"Spule nicht gefunden — sie wurde möglicherweise bereits gelöscht",deleteFailed:"Spule konnte nicht gelöscht werden",archiveSpoolNotFound:"Spule nicht gefunden — sie wurde möglicherweise bereits gelöscht",archiveFailed:"Spule konnte nicht archiviert werden",restoreSpoolNotFound:"Spule nicht gefunden — sie wurde möglicherweise bereits gelöscht",restoreFailed:"Spule konnte nicht wiederhergestellt werden",saveFailed:"Änderungen konnten nicht gespeichert werden",tagClearFailed:"Tag konnte nicht gelöscht werden",deleteConfirm:"Möchten Sie diese Spule wirklich löschen? Dies kann nicht rückgängig gemacht werden.",archiveConfirm:"Möchten Sie diese Spule wirklich archivieren?",advancedSettings:"Erweiterte Einstellungen",filamentInfoTab:"Filament-Info",paProfileTab:"PA-Profil",filamentInfo:"Filament",additional:"Zusätzlich",loadingPresets:"Cloud-Presets werden geladen...",cloudConnected:"Cloud verbunden",cloudNotConnected:"Cloud nicht verbunden (Standardwerte)",recentColors:"Zuletzt",searchColors:"Farben suchen...",searchResults:"Suchergebnisse",allColors:"Alle Farben",commonColors:"Häufige Farben",showLess:"Weniger",showAll:"Alle",noColorsFound:"Keine Farben gefunden",noResults:"Keine Ergebnisse",extraColorsLabel:"Zusätzliche Farben",extraColorsPlaceholder:"EC984C,#6CD4BC,A66EB9,D87694",extraColorsHint:"2 bis 8 Hex-Stops, durch Kommas getrennt. Wird als Verlauf dargestellt.",extraColorsInvalid:"Ungültige Hex-Werte ignoriert: {{tokens}}",colorEffectLabel:"Effekt",colorEffect:{none:"Keiner",sparkle:"Glitzer",wood:"Holz",marble:"Marmor",glow:"Leuchtend",matte:"Matt",silk:"Seide",galaxy:"Galaxie",rainbow:"Regenbogen",metal:"Metallic",translucent:"Lichtdurchlässig",gradient:"Verlauf",dualColor:"Zweifarbig",triColor:"Dreifarbig",multicolor:"Mehrfarbig"},selectMaterialFirst:"Bitte zuerst ein Material im Filament-Info Tab auswählen.",noPrintersConfigured:"Keine Drucker konfiguriert. Fügen Sie Drucker hinzu.",matchingFilter:"Filter",anyBrand:"Jede Marke",anyVariant:"Jede Variante",autoSelect:"Auto-Auswahl",matches:"Treffer",match:"Treffer",noMatches:"Keine Treffer",connected:"Verbunden",offline:"Offline",printerOffline:"Drucker ist offline. Verbinden Sie ihn, um Kalibrierungsprofile anzuzeigen.",noKProfilesMatch:"Keine K-Profile stimmen mit dem gewählten Filament überein.",leftNozzle:"Linke Düse",rightNozzle:"Rechte Düse",profilesSelected:"Kalibrierungsprofil(e) ausgewählt",totalInventory:"Gesamtbestand",totalConsumed:"Gesamtverbrauch",byMaterial:"Nach Material",inPrinter:"Im Drucker",lowStock:"Niedriger Bestand",sinceTracking:"Seit Beginn der Erfassung",resetConsumedCounter:"Zähler zurücksetzen",resetConsumedCounterTooltip:"Den verbrauchten Gramm-Zähler dieser Spule auf null setzen. Das Restgewicht bleibt unverändert.",resetConsumedCounterConfirm:"Verbrauchten Gramm-Zähler dieser Spule auf 0 zurücksetzen? Künftige Drucke zählen wieder ab null. Die Spule selbst, ihre Restgewichtsberechnung und Ihre Einstellungen bleiben unverändert.",resetAllConsumedCounters:"Alle Zähler zurücksetzen",resetAllConsumedCountersTooltip:"Den verbrauchten Gramm-Zähler auf jeder Spule auf null setzen. Die Restgewichte bleiben unverändert.",resetAllConsumedCountersConfirm:"Verbrauchten Gramm-Zähler auf allen {{count}} Spulen (archivierte eingeschlossen) auf 0 zurücksetzen? Das löscht den Wert „Insgesamt verbraucht“, sodass künftige Drucke wieder ab null gezählt werden. Spulen und Restgewichte bleiben unverändert.",consumedCounterReset:"Zähler zurückgesetzt",allConsumedCountersReset:"Zähler für {{count}} Spule(n) zurückgesetzt",resetConsumedCounterFailed:"Zähler konnte nicht zurückgesetzt werden",loadedInAms:"Im AMS/Ext geladen",remaining:"Verbleibend",weightCheck:"Gewichtskontrolle",lastWeighed:"Zuletzt gewogen",neverWeighed:"Nie gewogen",search:"Spulen suchen...",showing:"Zeige",to:"bis",of:"von",show:"Zeige",spools:"Spulen",spool:"Spule",page:"Seite",noSpoolsMatch:"Keine Ergebnisse",noSpoolsMatchDesc:"Versuchen Sie, Ihre Suche oder Filter anzupassen.",active:"Aktiv",archived:"Archiviert",all:"Alle",used:"Verwendet",new:"Neu",clearFilters:"Filter löschen",table:"Tabelle",cards:"Karten",net:"Netto",groupSimilar:"Gruppieren",groupedSpools:"{{count}} identische Spulen",groupedRows:"Zeilen",columns:"Spalten",configureColumns:"Spalten konfigurieren",configureColumnsDesc:"Ziehen zum Neuordnen oder Pfeile verwenden. Sichtbarkeit mit dem Augensymbol umschalten.",visible:"sichtbar",reset:"Zurücksetzen",cancel:"Abbrechen",applyChanges:"Änderungen anwenden",moveUp:"Nach oben",moveDown:"Nach unten",hideColumn:"Spalte ausblenden",showColumn:"Spalte einblenden",linkToSpool:"Mit Spule verknüpfen",tagLinked:"Tag mit Spule verknüpft",tagLinkFailed:"Tag-Verknüpfung fehlgeschlagen",tagAlreadyLinked:"Tag bereits mit anderer Spule verknüpft",unknownTag:"Unbekannter RFID-Tag erkannt",usageHistory:"Verbrauchshistorie",noUsageHistory:"Noch kein Verbrauch erfasst",printName:"Druckname",weightConsumed:"Verbrauchtes Gewicht",clearHistory:"Löschen",historyCleared:"Verbrauchshistorie gelöscht",fillSourceLabel:"(Inv)",lowStockThresholdError:"Der Schwellenwert muss zwischen 0.1 und 99.9 liegen",assignMismatchTitle:"Material stimmt nicht überein",assignMismatchMessage:'Das ausgewählte Spulenmaterial "{{spoolMaterial}}" stimmt nicht mit dem Tray-Material "{{trayMaterial}}" für {{location}} überein. Trotzdem zuweisen?',assignMismatchConfirm:"Trotzdem zuweisen",assignPartialMismatchMessage:'Das Spulenmaterial "{{spoolMaterial}}" ist ähnlich, stimmt aber nicht genau mit "{{trayMaterial}}" in {{location}} überein. Möchten Sie fortfahren?',assignProfileMismatchMessage:'Das Spulenprofil "{{spoolProfile}}" stimmt nicht mit dem Fachprofil "{{trayProfile}}" in {{location}} überein. Möchten Sie fortfahren?',assignReconfigureNote:"Der AMS-Slot wird mit dem Profil der Spule neu konfiguriert.",spoolmanFilamentCatalog:"Spoolman-Filamentkatalog",pickFromSpoolmanCatalog:"Aus Spoolman-Katalog wählen…",spoolmanFilamentSelected:"Filament aus Spoolman-Katalog ausgewählt",spoolmanFilamentUnlinked:"Verknüpfung mit Filamentkatalog aufgehoben",noSpoolmanFilaments:"Keine Filamente im Spoolman-Katalog gefunden",spoolmanFilamentColorSwatch:"Filamentfarbe",spoolWeightManagedBySpoolman:"Das Leerspulengewicht wird pro Filamenttyp in Spoolman verwaltet",spoolmanCatalogLoadFailed:"Spoolman-Filamentkatalog konnte nicht geladen werden"},timelapse:{title:"Zeitraffer",create:"Zeitraffer erstellen",download:"Herunterladen",delete:"Löschen",preview:"Vorschau",frameRate:"Bildrate",quality:"Qualität",processing:"Wird verarbeitet...",noTimelapses:"Keine Zeitraffer verfügbar"},ams:{title:"AMS",slot:"Slot",empty:"Leer",emptySlot:"Leerer Slot",slotEmpty:"Leer",emptySlotReset:"Keine Spule zugewiesen",unknown:"Unbekannt",humidity:"Luftfeuchtigkeit",temperature:"Temperatur",filamentType:"Filamenttyp",filamentColor:"Farbe",remaining:"Verbleibend",history:"AMS-Verlauf",noHistory:"Kein Verlauf verfügbar",configureSlot:"Slot konfigurieren",externalSpool:"Externe Spule",profile:"Profil",kFactor:"K-Faktor",fill:"Füllstand",configure:"Konfigurieren",used:"verwendet",remainingUnit:"verbleibend"},printModal:{title:"Druck starten",selectPrinter:"Drucker auswählen",selectPlate:"Platte auswählen",filamentMapping:"Filamentzuordnung",totalCost:"Gesamtkosten:",slotRemainingShort:" - {{grams}}g übrig",printSettings:"Druckeinstellungen",bedLeveling:"Bett-Nivellierung",flowCalibration:"Fluss-Kalibrierung",vibrationCalibration:"Vibrations-Kalibrierung",layerInspection:"Erste-Schicht-Prüfung",timelapse:"Zeitraffer",startPrint:"Druck starten",addToQueue:"Zur Warteschlange hinzufügen",cancel:"Abbrechen",noPrintersAvailable:"Keine Drucker verfügbar",printerBusy:"Drucker ist beschäftigt",printerOffline:"Drucker ist offline",sameTypeDifferentColor:"Gleicher Typ, andere Farbe",filamentTypeNotLoaded:"Filamenttyp nicht geladen",openCalendar:"Kalender öffnen",leftNozzle:"L",rightNozzle:"R",leftNozzleTooltip:"Linke Düse",rightNozzleTooltip:"Rechte Düse",filamentOverride:"Filament-Überschreibung",filamentOverrideHint:"Filamente für modellbasierte Zuweisung optional überschreiben. Der Planer wird gegen die ausgewählten Filamente statt der ursprünglichen 3MF-Werte abgleichen.",originalFilament:"Original",overrideWith:"Ersetzen mit",resetToOriginal:"Auf Original zurücksetzen",insufficientFilamentTitle:"Nicht genug Filament",insufficientFilamentMessage:"Einige zugewiesene Spulen haben weniger Filament als dieser Druck benötigt:",insufficientFilamentLine:"{{printer}} - {{slot}}: benötigt {{required}}g, verbleibend {{remaining}}g",printAnyway:"Trotzdem drucken",forceColorMatch:"Farbe erzwingen",staggerPrinterStarts:"Druckerstarts staffeln",staggerGroupSize:"Gruppengröße",staggerInterval:"Intervall (Min.)",staggerPreview:"{{printers}} Drucker → {{groups}} Gruppen à {{size}}, Start alle {{interval}} Min.",staggerLastGroup:"letzte Gruppe: {{count}}",staggerTotal:"insgesamt: {{minutes}} Min.",staggerToPrinters:"Gestaffelt an {{count}} Drucker senden",gcodeInjection:"Auto-Print G-code einfügen"},backup:{includesEncryptionKey:"Lokale Sicherungen enthalten die MFA-Schlüsseldatei (DATA_DIR/.mfa_encryption_key), damit ein Backup-ZIP selbstkonsistent ist. Behandle das ZIP als sensibel — wer Zugriff auf die Datei hat, kann die darin enthaltenen OIDC-Client-Secrets und TOTP-Geheimnisse entschlüsseln.",title:"Sichern & Wiederherstellen",createBackup:"Sicherung erstellen",restoreBackup:"Sicherung wiederherstellen",restoreDescription:"Alle Daten aus einer Sicherungsdatei ersetzen",downloadBackup:"Sicherung herunterladen",uploadBackup:"Sicherung hochladen",lastBackup:"Letzte Sicherung",autoBackup:"Automatische Sicherung",backupNow:"Jetzt sichern",restoreWarning:"Warnung: Das Wiederherstellen einer Sicherung überschreibt alle aktuellen Daten.",includeArchives:"Archive einschließen",includeSettings:"Einstellungen einschließen",includeProfiles:"Profile einschließen",backupSuccess:"Sicherung erfolgreich erstellt",restoreSuccess:"Sicherung erfolgreich wiederhergestellt",backupFailed:"Sicherung fehlgeschlagen",restoreFailed:"Wiederherstellung fehlgeschlagen",restoreNote:"Virtueller Drucker wird während der Wiederherstellung gestoppt",githubBackup:"Git-Backup",enabled:"Aktiviert",cloudLoginRequired:"Bambu Cloud Login erforderlich. Melden Sie sich unter Profile → Cloud-Profile an, um GitHub-Backup zu aktivieren.",cloudLoginRequiredShort:"Cloud-Login erforderlich",githubDescription:"Synchronisieren Sie Ihre Profile automatisch mit einem privaten GitHub-Repository für Backup und Versionsverlauf.",repoIsPrivate:"Repository ist privat — Sicherung möglich.",repoIsPublicWarning:"Das Repository ist ÖFFENTLICH. Bambuddy-Backups enthalten MQTT-Zugangsdaten, Home-Assistant-Tokens, Prometheus-Tokens, Ihre Bambu-Cloud-E-Mail-Adresse und über K-Profile auch Drucker-Zugangscodes. Speichern ist blockiert, bis Sie das Repository in den Einstellungen Ihres Anbieters auf privat stellen.",repoVisibilityUnknown:"Die Sichtbarkeit des Repositories konnte nicht bestimmt werden. Bambuddy sichert nur in Repositories, die nachweislich privat sind; Speichern wird blockiert.",repositoryUrl:"Repository-URL",repoUrlPlaceholderGitHub:"https://github.com/username/repo-name",repoUrlPlaceholderGitea:"https://gitea.example.com/username/repo-name",repoUrlPlaceholderForgejo:"https://forgejo.example.com/username/repo-name",repoUrlPlaceholderGitLab:"https://gitlab.com/username/repo-name",allowInsecureHttp:"Unsicheres HTTP erlauben",allowInsecureHttpHint:"Für selbst gehostete Instanzen in privaten Netzwerken ohne TLS aktivieren",personalAccessToken:"Persönlicher Zugriffstoken",tokenSaved:"(gespeichert)",enterNewToken:"Neuen Token eingeben zum Aktualisieren",tokenHint:"Feingranularer Token mit Lese-/Schreibberechtigung für Inhalte",branch:"Branch",provider:"Git-Anbieter",providerGitHub:"GitHub",providerGitLab:"GitLab",providerGitea:"Gitea",providerForgejo:"Forgejo",manualOnly:"Nur manuell",hourly:"Stündlich",daily:"Täglich",weekly:"Wöchentlich",includeInBackup:"In Sicherung einschließen",kProfiles:"K-Profile",kProfilesDescription:"Druckvorschub-Kalibrierung von verbundenen Druckern",noPrintersConnected:"Keine Drucker verbunden",printersConnected:"{{connected}}/{{total}} verbunden",cloudProfiles:"Cloud-Profile",cloudProfilesDescription:"Filament-, Drucker- und Prozessprofile aus der Bambu Cloud",appSettings:"App-Einstellungen",appSettingsDescription:"Bambuddy-Konfiguration (komplette Datenbank)",spoolInventory:"Spulenbestand",spoolInventoryDescription:"Filamentspulen, Nutzungsverlauf und Kostenverfolgung",printArchives:"Druckarchive",printArchivesDescription:"Druckverlauf-Metadaten (keine GCode/3MF-Dateien)",lastBackupAt:"Letzte Sicherung:",noBackupsYet:"Noch keine Sicherungen",next:"Nächste:",startingBackup:"Sicherung wird gestartet...",test:"Test",enableBackup:"Sicherung aktivieren",testConnection:"Verbindung testen",enterRepoUrl:"Repository-URL eingeben",enterRepoAndToken:"Repository-URL und Zugriffstoken eingeben",repoRequired:"Repository-URL ist erforderlich",tokenRequired:"Zugriffstoken ist erforderlich",githubBackupEnabled:"GitHub-Backup aktiviert",tokenUpdated:"Token aktualisiert",settingsSaved:"Einstellungen gespeichert",failedToSave:"Speichern fehlgeschlagen: {{message}}",backupCompleteFiles:"Sicherung abgeschlossen - {{count}} Dateien aktualisiert",backupSkippedNoChanges:"Sicherung übersprungen - keine Änderungen",backupFailed2:"Sicherung fehlgeschlagen: {{message}}",clearedLogs:"{{count}} Protokolle gelöscht",failedToClearLogs:"Protokolle löschen fehlgeschlagen: {{message}}",history:"Verlauf",clear:"Löschen",date:"Datum",status:"Status",commit:"Commit",localBackup:"Lokale Sicherung",localBackupDescription:"Erstellen Sie eine vollständige Sicherung Ihrer Bambuddy-Daten einschließlich Datenbank, Archive, Uploads und aller Dateien.",downloadBackupLabel:"Sicherung herunterladen",completeBackupZip:"Vollständige Sicherung: Datenbank + alle Dateien (ZIP)",download:"Herunterladen",preparingBackup:"Sicherung wird vorbereitet...",creatingArchive:"Sicherungsarchiv wird erstellt... Dies kann bei großen Archiven eine Weile dauern.",downloadingFile:"Sicherungsdatei wird heruntergeladen...",backupDownloaded:"Sicherung erfolgreich heruntergeladen",failedToCreateBackup:"Sicherung erstellen fehlgeschlagen: {{message}}",restore:"Wiederherstellen",restoreReplacesAll:"Wiederherstellung ersetzt alle Daten.",restoreReplacesAllDetail:"Ihre aktuelle Datenbank und Dateien werden vollständig ersetzt. Nach der Wiederherstellung ist ein Neustart erforderlich.",restoreConfirmTitle:"Sicherung wiederherstellen",restoreConfirmMessage:'Sind Sie sicher, dass Sie von "{{filename}}" wiederherstellen möchten? Dies ersetzt Ihre aktuelle Datenbank und alle Dateien vollständig. Die Anwendung muss nach der Wiederherstellung neu gestartet werden.',restoreConfirmButton:"Sicherung wiederherstellen",uploadingFile:"Sicherungsdatei wird hochgeladen...",backupRestoredRestart:"Sicherung wiederhergestellt. Bitte starten Sie Bambuddy neu.",failedToRestore:"Sicherung wiederherstellen fehlgeschlagen. Bitte überprüfen Sie das Dateiformat.",reloadNow:"Jetzt neu laden",creatingBackup:"Sicherung erstellen",restoringBackup:"Sicherung wiederherstellen",preparing:"Vorbereiten...",processing:"Verarbeiten...",doNotClosePage:"Bitte schließen Sie diese Seite nicht und navigieren Sie nicht weg. Dieser Vorgang kann bei großen Sicherungen mehrere Minuten dauern.",restoring:"Wiederherstellen...",restoreComplete:"Wiederherstellung abgeschlossen",restoreFailed2:"Wiederherstellung fehlgeschlagen",importSettings:"Einstellungen aus einer Sicherungsdatei importieren",pleaseWaitRestoring:"Bitte warten Sie, während Ihre Daten wiederhergestellt werden",selectBackupFile:"Klicken Sie, um eine Sicherungsdatei auszuwählen (.json oder .zip)",duplicateHandling:"So funktioniert die Duplikatbehandlung:",matchPrinters:"Drucker",matchPrintersBy:"abgeglichen nach Seriennummer",matchSmartPlugs:"Smart Plugs",matchSmartPlugsBy:"abgeglichen nach IP-Adresse",matchNotificationProviders:"Benachrichtigungsanbieter",matchNotificationProvidersBy:"abgeglichen nach Name",matchFilaments:"Filamente",matchFilamentsBy:"abgeglichen nach Name + Typ + Marke",matchArchives:"Archive",matchArchivesBy:"abgeglichen nach Inhaltshash (immer übersprungen)",matchPendingUploads:"Ausstehende Uploads",matchPendingUploadsBy:"abgeglichen nach Dateiname",matchSettingsTemplates:"Einstellungen & Vorlagen",matchSettingsTemplatesBy:"immer überschrieben",replaceExisting:"Vorhandene Daten ersetzen",keepExisting:"Vorhandene Daten behalten",overwriteDescription:"Bereits vorhandene Elemente mit Sicherungsdaten überschreiben",keepDescription:"Nur Elemente wiederherstellen, die noch nicht vorhanden sind",overwriteCaution:"Achtung:",overwriteWarning:"Das Überschreiben ersetzt Ihre aktuellen Konfigurationen durch Daten aus der Sicherung. Drucker-Zugangscodes werden aus Sicherheitsgründen nie überschrieben.",cancel:"Abbrechen",processingBackup:"Sicherungsdatei wird verarbeitet...",itemsRestored:"Wiederhergestellt",itemsSkipped:"Übersprungen",restored:"Wiederhergestellt",skippedAlreadyExist:"Übersprungen (bereits vorhanden)",filesCategory:"Dateien (3MF, Thumbnails, etc.)",andMore:"...und {{count}} weitere",newApiKeysGenerated:"Neue API-Schlüssel generiert",keysShownOnce:"Diese Schlüssel werden nur einmal angezeigt. Kopieren Sie sie jetzt!",copy:"Kopieren",noDataFound:"In der Sicherungsdatei wurden keine Daten zur Wiederherstellung gefunden.",close:"Schließen",scheduledBackup:"Geplante Backups",scheduledBackupDescription:"Backup-Snapshots automatisch nach Zeitplan erstellen. Ausgabeverzeichnis kann auf einen NAS oder externen Speicher gemountet werden.",frequency:"Frequenz",backupTime:"Zeit",retention:"Aufbewahrung",retentionDescription:"Anzahl der zu behaltenden Backups",outputPath:"Ausgabepfad",outputPathPlaceholder:"Standard: {{path}}",outputPathDescription:"Leer lassen für den Standardort",runNow:"Jetzt ausführen",backupFiles:"Backup-Dateien",noScheduledBackups:"Noch keine Backups",deleteBackup:"Löschen",deleteBackupConfirm:"Diese Backup-Datei löschen?",backupRunning:"Backup läuft...",scheduledBackupComplete:"Backup erfolgreich abgeschlossen",scheduledBackupFailed:"Backup fehlgeschlagen",nextBackup:"Nächstes Backup",backupSize:"Größe",localTimeHint:"Ortszeit ({{tz}})",defaultPathLabel:"Standard:",categories:{settings:"Einstellungen",notification_providers:"Benachrichtigungsanbieter",notification_templates:"Benachrichtigungsvorlagen",smart_plugs:"Smart Plugs",printers:"Drucker",filaments:"Filamente",maintenance_types:"Wartungstypen",archives:"Archive",projects:"Projekte",pending_uploads:"Ausstehende Uploads",external_links:"Externe Links",api_keys:"API-Schlüssel"}},tags:{title:"Tags",addTag:"Tag hinzufügen",editTag:"Tag bearbeiten",deleteTag:"Tag löschen",tagName:"Tag-Name",tagColor:"Tag-Farbe",noTags:"Keine Tags",deleteConfirm:"Möchten Sie diesen Tag wirklich löschen?",manageTags:"Tags verwalten"},uploadModal:{title:"3MF-Dateien hochladen",dragDrop:"3MF-Dateien hierher ziehen",or:"oder",browseFiles:"Dateien durchsuchen",extractionInfo:"Das Druckermodell wird automatisch aus den 3MF-Datei-Metadaten extrahiert.",uploaded:"hochgeladen",failed:"fehlgeschlagen",uploading:"Wird hochgeladen...",upload:"Hochladen",uploadFailed:"Hochladen fehlgeschlagen"},editArchive:{title:"Archiv bearbeiten",name:"Name",namePlaceholder:"Druckname",printer:"Drucker",noPrinter:"Kein Drucker",project:"Projekt",noProject:"Kein Projekt",itemsPrinted:"Gedruckte Teile",itemsPrintedHelp:"Anzahl der in diesem Druckauftrag produzierten Teile",notes:"Notizen",notesPlaceholder:"Notizen zu diesem Druck hinzufügen...",externalLink:"Externer Link",externalLinkPlaceholder:"https://printables.com/model/...",externalLinkHelp:"Link zu Printables, Thingiverse oder anderer Quelle",tags:"Tags",tagsPlaceholder:"Tags hinzufügen...",addMoreTags:"Weitere Tags hinzufügen...",matchingTags:'Übereinstimmend mit "{{query}}"',existingTags:"Vorhandene Tags",clickToAdd:"(zum Hinzufügen klicken)",status:"Status",failureReason:"Fehlergrund",selectReason:"Grund auswählen...",photos:"Fotos des Druckergebnisses",photosHelp:"Klicken Sie auf + um Fotos Ihres Druckergebnisses hinzuzufügen",printResult:"Druckergebnis",saving:"Wird gespeichert...",failureReasons:{adhesionFailure:"Haftungsfehler",spaghettiDetached:"Spaghetti / Abgelöst",layerShift:"Schichtversatz",cloggedNozzle:"Verstopfte Düse",filamentRunout:"Filament aufgebraucht",warping:"Verformung",stringing:"Fadenziehen",underExtrusion:"Unterextrusion",powerFailure:"Stromausfall",userCancelled:"Vom Benutzer abgebrochen",other:"Sonstiges"},statuses:{completed:"Abgeschlossen",failed:"Fehlgeschlagen",aborted:"Abgebrochen",printing:"Druckt"}},kProfiles:{title:"K-Profile",noPrintersConfigured:"Keine Drucker konfiguriert",addPrinterInSettings:"Fügen Sie einen Drucker in den Einstellungen hinzu, um K-Profile zu verwalten",noActivePrinters:"Keine aktiven Drucker",enablePrinterConnection:"Aktivieren Sie eine Druckerverbindung, um K-Profile anzuzeigen",loadingProfiles:"Lade K-Profile...",printerOffline:"Drucker offline",printerOfflineDesc:"Der ausgewählte Drucker ist nicht verbunden. Schalten Sie ihn ein, um K-Profile anzuzeigen.",noMatchingProfiles:"Keine passenden Profile",noMatchingProfilesDesc:"Keine Profile entsprechen Ihren Suchkriterien",noKProfiles:"Keine K-Profile",noKProfilesDesc:"Keine Druckvorschub-Profile für {{diameter}}mm Düse gefunden",createFirstProfile:"Erstes Profil erstellen",printer:"Drucker",nozzle:"Düse",refresh:"Aktualisieren",addProfile:"Profil hinzufügen",export:"Exportieren",import:"Importieren",select:"Auswählen",selectAll:"Alle auswählen",delete:"Löschen",searchPlaceholder:"Nach Name oder Filament suchen...",allExtruders:"Alle Extruder",leftOnly:"Nur links",rightOnly:"Nur rechts",allFlow:"Alle Flusstypen",hfOnly:"Nur HF",sOnly:"Nur S",sortName:"Sortieren: Name",sortKValue:"Sortieren: K-Wert",sortFilament:"Sortieren: Filament",leftExtruder:"Linker Extruder",rightExtruder:"Rechter Extruder",modal:{addTitle:"K-Profil hinzufügen",editTitle:"K-Profil bearbeiten",profileName:"Profilname",profileNamePlaceholder:"Mein PLA-Profil",kValue:"K-Wert",kValuePlaceholder:"0,020",kValueHelp:"Typischer Bereich: 0,01 - 0,06 für PLA, 0,02 - 0,10 für PETG",filament:"Filament",selectFilament:"Filament auswählen...",noFilamentsHelp:"Keine Filamente gefunden. Erstellen Sie zuerst ein K-Profil in Bambu Studio.",flowType:"Flusstyp",highFlow:"Hoher Durchfluss",standard:"Standard",nozzleSize:"Düsengröße",extruder:"Extruder",extruders:"Extruder",left:"Links",right:"Rechts",notes:"Notizen (lokal gespeichert)",notesPlaceholder:"Notizen zu diesem Profil hinzufügen...",notesHelp:"Notizen werden in Bambuddy gespeichert, nicht auf dem Drucker",syncing:"Synchronisiert mit Drucker...",savingExtruder:"Speichern auf Extruder {{current}}/{{total}}...",pleaseWait:"Bitte warten"},deleteConfirm:{title:"Profil löschen",cannotUndo:"Dies kann nicht rückgängig gemacht werden",message:'Möchten Sie "{{name}}" wirklich vom Drucker löschen?'},bulkDelete:{title:"Profile löschen",cannotUndo:"Dies kann nicht rückgängig gemacht werden",message:"Möchten Sie wirklich {{count}} ausgewählte Profile vom Drucker löschen?"},toast:{profileSaved:"K-Profil gespeichert",profilesSaved:"K-Profil auf {{count}} Extrudern gespeichert",selectAtLeastOneExtruder:"Bitte wählen Sie mindestens einen Extruder aus",profileDeleted:"K-Profil gelöscht",profilesDeleted:"{{count}} Profile gelöscht",exportedProfiles:"{{count}} Profile exportiert",importedProfiles:"{{count}} von {{total}} Profilen importiert",noProfilesToExport:"Keine Profile zum Exportieren",invalidFileFormat:"Ungültiges Dateiformat",failedToParseImport:"Import-Datei konnte nicht gelesen werden",failedToSaveBatch:"K-Profile konnten nicht gespeichert werden",noteSaved:"Notiz gespeichert",failedToSaveNote:"Notiz konnte nicht gespeichert werden"},permission:{noRead:"Sie haben keine Berechtigung, Profile zu aktualisieren",noCreate:"Sie haben keine Berechtigung, Profile hinzuzufügen",noUpdate:"Sie haben keine Berechtigung, K-Profile zu aktualisieren",noDelete:"Sie haben keine Berechtigung, K-Profile zu löschen",noExport:"Sie haben keine Berechtigung, Profile zu exportieren",noImport:"Sie haben keine Berechtigung, Profile zu importieren"}},virtualPrinter:{title:"Virtueller Drucker",running:"Läuft",stopped:"Gestoppt",description:{default:"Aktiviere einen virtuellen Drucker, der in Bambu Studio und OrcaSlicer erscheint. Dateien, die an diesen Drucker gesendet werden, werden direkt archiviert ohne zu drucken.",proxy:"Aktiviere einen Proxy, der Slicer-Datenverkehr an einen echten Drucker weiterleitet, um Ferndruck über jedes Netzwerk zu ermöglichen."},enable:{title:"Virtuellen Drucker aktivieren",visibleInSlicer:'Sichtbar als "Bambuddy" in der Slicer-Erkennung',proxyingTo:"Proxy zu {{name}}",notActive:"Nicht aktiv"},model:{title:"Druckermodell",description:"Wähle welches Druckermodell emuliert werden soll.",restartWarning:"Das Ändern des Modells startet den virtuellen Drucker neu"},accessCode:{title:"Zugangscode",isSet:"Zugangscode ist gesetzt",notSet:"Kein Zugangscode gesetzt - erforderlich zum Aktivieren",placeholder:"8-Zeichen-Code eingeben",placeholderChange:"Neuen Code eingeben zum Ändern",hint:"Muss genau 8 Zeichen lang sein. Wird von Slicern zur Authentifizierung verwendet.",charCount:"({{count}}/8)"},targetPrinter:{title:"Zieldrucker",configured:"Proxy-Ziel konfiguriert",notConfigured:"Kein Zieldrucker ausgewählt - erforderlich für Proxy-Modus",placeholder:"Drucker auswählen...",hint:"Wähle den Drucker aus, an den der Slicer-Datenverkehr weitergeleitet werden soll. Der Drucker muss im LAN-Modus sein.",noPrinters:"Keine Drucker konfiguriert. Füge zuerst einen Drucker hinzu, um den Proxy-Modus zu verwenden."},remoteInterface:{title:"Netzwerkschnittstelle überschreiben",configured:"Schnittstellenüberschreibung aktiv",optional:"Optional - verwenden wenn die automatisch erkannte IP falsch ist (z.B. mehrere NICs, Docker, VPN)",placeholder:"Automatisch erkennen (Standard)...",hint:"Überschreibt die per SSDP beworbene und im TLS-Zertifikat verwendete IP-Adresse. Nützlich wenn Bambuddy mehrere Netzwerkschnittstellen hat."},mode:{title:"Modus",archive:"Archivieren",archiveDesc:"Dateien sofort archivieren",review:"Überprüfen",reviewDesc:"Vor dem Archivieren überprüfen",queue:"Warteschlange",queueDesc:"Archivieren und zur Warteschlange hinzufügen",proxy:"Proxy",proxyDesc:"An echten Drucker weiterleiten"},autoDispatch:{title:"Automatisch starten",description:"Drucke automatisch starten, wenn sie zur Warteschlange hinzugefügt werden. Wenn deaktiviert, warten Drucke auf manuellen Start."},queueForceColorMatch:{title:"Farbabgleich erzwingen",description:"Druckaufträge nur an Drucker senden, bei denen der genaue Filament-Typ und die genaue Farbe geladen sind. Standardmäßig deaktiviert — ohne diese Option verwendet die Warteschlange nur den Drucker-Modell-Abgleich und wählt möglicherweise einen Drucker mit der falschen Farbe."},tailscaleDisabled:{title:"Tailscale-Integration",description:"Aktivieren, um diesen VP als per Tailscale erreichbar zu markieren. Zeigt die Tailscale-Adresse des Hosts an, damit du weißt, welche IP du im Slicer eintragen musst. Der CA-Import bleibt unverändert — diese Option hat keinen Einfluss auf Zertifikate."},setupRequired:{title:"Einrichtung erforderlich",description:"Die virtuelle Druckerfunktion erfordert zusätzliche Systemkonfiguration, bevor sie funktioniert. Dies beinhaltet Portweiterleitung, Firewall-Regeln und plattformspezifische Einstellungen.",readGuide:"Lese die Einrichtungsanleitung vor dem Aktivieren"},archiveNameSource:{title:"Quelle des Archivnamens",description:'Lege fest, wie neue Archive benannt werden, wenn Dateien über den virtuellen Drucker eintreffen. "Metadaten" verwendet den im 3MF eingebetteten Titel des Slicers (Standard). "Dateiname" nutzt den Dateinamen, den Bambu Studio per FTP gesendet hat — praktisch, wenn der Job im Dialog "Zum Drucker senden" umbenannt wurde.',metadata:"Metadaten",filename:"Dateiname"},caCert:{title:"Slicer-Zertifikat",description:"Virtuelle Drucker verwenden ein TLS-Zertifikat, das von der Bambuddy-CA signiert ist. Importieren Sie dieses CA-Zertifikat einmalig in den Vertrauensspeicher Ihres Slicers, damit er die Verbindung akzeptiert — kein Abrufen über die Kommandozeile mehr nötig.",copy:"Kopieren",copied:"Kopiert",download:"Herunterladen",fingerprint:"SHA-256"},howItWorks:{title:"So funktioniert es",step1:"Im selben LAN erscheinen virtuelle Drucker automatisch in deinem Slicer (Bambu Studio / OrcaSlicer). Aus anderen Netzwerken füge sie manuell per IP-Adresse und Zugangscode hinzu.",step2:'Im Archiv-, Überprüfungs- und Warteschlangen-Modus verwende die "Senden"-Funktion im Slicer, um 3MF-Dateien an Bambuddy zu senden. Der Slicer zeigt "Druck erfolgreich" — die Datei wird gespeichert, nicht gedruckt.',step3:"Im Proxy-Modus leitet der virtuelle Drucker den gesamten Datenverkehr an einen echten Drucker weiter — Drucke starten sofort wie bei einer direkten Verbindung."},status:{title:"Status-Details",printerName:"Druckername",model:"Modell",serialNumber:"Seriennummer",mode:"Modus",pendingFiles:"Ausstehende Dateien",targetPrinter:"Zieldrucker",ftpPort:"FTP-Port",mqttPort:"MQTT-Port",ftpConnections:"FTP-Verbindungen",mqttConnections:"MQTT-Verbindungen"},toast:{updated:"Virtuelle Druckereinstellungen aktualisiert",failedToUpdate:"Einstellungen konnten nicht aktualisiert werden",copyFailed:"Kopieren fehlgeschlagen — bitte Text manuell markieren",accessCodeRequired:"Bitte zuerst einen Zugangscode setzen",targetPrinterRequired:"Bitte zuerst einen Zieldrucker auswählen",bindIpRequired:"Bitte zuerst eine Bind-IP setzen",accessCodeEmpty:"Zugangscode darf nicht leer sein",accessCodeLength:"Zugangscode muss genau 8 Zeichen lang sein",created:"Virtueller Drucker erstellt",failedToCreate:"Virtueller Drucker konnte nicht erstellt werden",deleted:"Virtueller Drucker gelöscht",failedToDelete:"Virtueller Drucker konnte nicht gelöscht werden"},list:{title:"Virtuelle Drucker",add:"Hinzufügen",addFirst:"Virtuellen Drucker hinzufügen",empty:"Keine virtuellen Drucker konfiguriert. Fügen Sie einen hinzu, um zu beginnen."},bindIp:{title:"Bind-Interface",placeholder:"Interface auswählen...",hint:"Netzwerkinterface, an das dieser virtuelle Drucker gebunden wird. Muss pro Drucker eindeutig sein."},proxy:{accessCodeHint:"Im Proxy-Modus den Zugangscode des Zieldruckers im Slicer verwenden. Die Verbindung wird transparent zum echten Drucker weitergeleitet."},addDialog:{title:"Virtuellen Drucker hinzufügen",name:"Name",hint:"Sie können Zugangscode, Zieldrucker und andere Einstellungen nach dem Erstellen konfigurieren.",create:"Erstellen"},deleteConfirm:{title:"Virtuellen Drucker löschen",message:'Möchten Sie "{{name}}" wirklich löschen? Dies stoppt alle Dienste für diesen Drucker.'}},modelViewer:{openInSlicer:"Im Slicer öffnen",tabs:{model:"3D-Modell",gcode:"G-Code Vorschau"},notAvailable:"nicht verfügbar",notSliced:"nicht geslicet",plates:"Platten",allPlates:"Alle Platten",plateNumber:"Platte {{number}}",plateCount:"{{count}} Platte",plateCount_other:"{{count}} Platten",objectCount:"{{count}} Objekt",objectCount_other:"{{count}} Objekte",filamentCount:"{{count}} Filament",filamentCount_other:"{{count}} Filamente",eta:"ETA {{minutes}} Min",noPreview:"Keine Vorschau für diese Datei verfügbar",pagination:{pageOf:"Seite {{current}} von {{total}}",prev:"Zurück",next:"Weiter"},errors:{failedToLoad:"Datei konnte nicht geladen werden",noMeshes:"Keine Meshes in 3MF-Datei gefunden",unsupportedFormat:"Nicht unterstütztes Dateiformat"}},maintenanceDescriptions:{lubricateCarbonRods:"Schmiermittel auf Karbonstäbe für sanfte Bewegung auftragen",lubricateRails:"Schmiermittel auf Linearschienen für sanfte Bewegung auftragen",cleanNozzle:"Hotend und Düse reinigen, um Verstopfungen zu verhindern",checkBelts:"Riemenspannung für präzise Drucke überprüfen",cleanBuildPlate:"Druckplatte für bessere Haftung reinigen",checkExtruder:"Extruderzahnräder auf Verschleiß prüfen",checkCooling:"Sicherstellen, dass Lüfter ordnungsgemäß funktionieren",generalInspection:"Allgemeine Druckerinspektion",cleanCarbonRods:"Karbonstäbe reinigen, um Reibung zu reduzieren",lubricateSteelRods:"Schmiermittel auf Stahlstangen für sanfte Bewegung auftragen",cleanSteelRods:"Stahlstangen reinigen, um Reibung zu reduzieren",cleanLinearRails:"Linearschienen abwischen, um Staub und Schmutz zu entfernen",checkPtfeTube:"PTFE-Schlauch auf Verschleiß oder Beschädigung prüfen",replaceHepaFilter:"HEPA-Filter für Luftqualität ersetzen",replaceCarbonFilter:"Aktivkohlefilter ersetzen",lubricateLeftNozzleRail:"Linke Düsenschiene schmieren (H2-Serie)"},smartPlugs:{offline:"Offline",admin:"Admin",openPlugAdminPage:"Plug-Admin-Seite öffnen",deleteSmartPlug:"Smart Plug löschen",turnOnSmartPlug:"Smart Plug einschalten",turnOffSmartPlug:"Smart Plug ausschalten",turnOn:"Einschalten",turnOff:"Ausschalten",addSmartPlug:{scanningNetwork:"Netzwerk wird durchsucht...",chooseEntity:"Entität auswählen...",connectionFailed:"Verbindung fehlgeschlagen",searchEntities:"Entitäten suchen...",searchPowerSensors:"Leistungssensoren suchen...",searchEnergySensors:"Energiesensoren suchen...",placeholders:{plugName:"Wohnzimmer Steckdose",mqttStateOnValue:"ON, true, 1",mqttSameAsPower:"Gleich wie Leistungs-Topic oder anders"}},linkedTo:"Verbunden mit:",monitorOnly:"Nur Überwachung",alerts:"Alarme",scheduleOn:"Ein {{time}}",scheduleOff:"Aus {{time}}",on:"Ein",off:"Aus",power:"Leistung",kwhToday:"kWh Heute",settings:"Einstellungen",automationSettings:"Automatisierungseinstellungen",showInSwitchbar:"In Schaltleiste anzeigen",quickAccessSidebar:"Schnellzugriff über Seitenleiste",enabled:"Aktiviert",enableAutomation:"Automatisierung für diesen Stecker aktivieren",autoOn:"Auto Ein",autoOnDescription:"Einschalten wenn Druck startet",autoOff:"Auto Aus",autoOffDescription:"Ausschalten wenn Druck abgeschlossen (einmalig)",autoOffPersistent:"Aktiviert lassen",autoOffPersistentDescription:"Zwischen Drucken aktiviert bleiben statt einmalig",autoOffAfterDrying:"Automatisch aus nach Trocknung",autoOffAfterDryingDescription:"Ausschalten, wenn AMS-Trocknung abgeschlossen ist",delayAfterDryingMinutes:"Verzögerung nach Trocknung (Minuten)",turnOffDelayMode:"Ausschaltverzögerungsmodus",time:"Zeit",temp:"Temp.",delayMinutes:"Verzögerung (Minuten)",tempThreshold:"Temperaturschwelle (°C)",tempThresholdDescription:"Schaltet aus wenn die Düse unter diese Temperatur abkühlt",edit:"Bearbeiten",deleteConfirm:'Möchten Sie "{{name}}" wirklich löschen? Dies kann nicht rückgängig gemacht werden.',turnOnConfirm:'Möchten Sie "{{name}}" wirklich einschalten?',turnOffConfirm:'Möchten Sie "{{name}}" wirklich ausschalten? Dies unterbricht die Stromversorgung des angeschlossenen Geräts.',failedToTurn:'{{name}}" konnte nicht {{action}} werden',unknown:"Unbekannt",addTitle:"Smart Plug hinzufügen",editTitle:"Smart Plug bearbeiten",stopScanning:"Suche beenden",discoverTasmota:"Tasmota Geräte suchen",foundDevices:"{{count}} Gerät(e) gefunden - zum Auswählen klicken:",noDevicesFound:"Keine Tasmota Geräte in Ihrem Netzwerk gefunden",haNotConfigured:"Home Assistant ist nicht konfiguriert. Einrichtung unter",haSettingsPath:"Einstellungen → Netzwerk → Home Assistant",selectEntity:"Entität auswählen *",ipAddress:"IP-Adresse *",nameLabel:"Name *",username:"Benutzername",password:"Passwort",authHint:"Leer lassen, wenn Ihr Tasmota-Gerät keine Authentifizierung benötigt",linkToPrinter:"Mit Drucker verbinden",noPrinter:"Kein Drucker (nur manuelle Steuerung)",linkingDescription:"Verknüpfung ermöglicht automatisches Ein-/Ausschalten bei Druckstart/-ende",powerAlerts:"Leistungsalarme",alertAbove:"Alarm wenn über (W)",alertBelow:"Alarm wenn unter (W)",alertDescription:"Benachrichtigung wenn der Stromverbrauch diese Schwellenwerte überschreitet. Leer lassen um diese Richtung zu deaktivieren.",dailySchedule:"Tagesplan",turnOnAt:"Einschalten um",turnOffAt:"Ausschalten um",scheduleDescription:"Den Stecker automatisch täglich zu diesen Zeiten ein-/ausschalten. Leer lassen um diese Aktion zu überspringen.",showOnPrinterCard:"Auf Druckerkarte anzeigen",displayOnPrinterCard:"Schaltfläche auf Druckerkarte anzeigen",connectedResult:"Verbunden!",deviceLabel:"Gerät: {{name}} - ",stateLabel:"Status: {{state}}",test:"Test",delete:"Löschen",save:"Speichern",add:"Hinzufügen",cancel:"Abbrechen",failedToStartScan:"Suche konnte nicht gestartet werden",nameRequired:"Name ist erforderlich",entityRequired:"Entität ist für Home Assistant Stecker erforderlich",mqttTopicRequired:"Mindestens ein MQTT-Topic muss für Leistung, Energie oder Statusüberwachung konfiguriert sein",loadingEntities:"Entitäten werden geladen...",loading:"Laden...",failedToLoadEntities:"Entitäten konnten nicht geladen werden: {{error}}",noEntitiesMatching:'Keine Entitäten gefunden die "{{search}}" entsprechen',noEntitiesAvailable:"Keine Entitäten verfügbar",searchingEntities:"Alle Entitäten durchsuchen ({{count}} gefunden)",showingEntities:"Zeige switch, light, input_boolean ({{count}} verfügbar)",energyMonitoringOptional:"Energieüberwachung (Optional)",energyMonitoringHint:"Sensoren suchen und auswählen, die Leistungs-/Energiedaten liefern.",powerSensorW:"Leistungssensor (W)",energyTodayKwh:"Energie Heute (kWh)",totalEnergyKwh:"Gesamtenergie (kWh)",noMatchingSensors:"Keine passenden Sensoren",none:"Keine",mqttNotConfigured:"MQTT-Broker nicht konfiguriert. Broker-Adresse einstellen unter",mqttSettingsPath:"Einstellungen → Netzwerk → MQTT-Veröffentlichung",mqttNotConfiguredSuffix:"(Sie müssen die Veröffentlichung nicht aktivieren, nur die Broker-Details ausfüllen).",mqttMonitorOnlyDescription:"MQTT-Stecker empfangen Leistungs-/Energiedaten über MQTT-Abonnement. Ein-/Ausschalten ist nicht verfügbar - verwenden Sie Ihren MQTT-Broker oder Ihr Home-Automation-System.",powerMonitoring:"Leistungsüberwachung",energyMonitoring:"Energieüberwachung",stateMonitoring:"Statusüberwachung",optional:"optional",topic:"Thema",jsonPath:"JSON-Pfad",multiplier:"Multiplikator",onValue:"EIN-Wert",mqttPowerHint:`JSON-Pfad extrahiert Wert aus JSON-Payload (z.B. "power_l1"). Leer lassen wenn Topic rohe numerische Werte sendet.
 Multiplikator 0.001 für mW→W, 1000 für kW→W verwenden.`,mqttEnergyHint:`JSON-Pfad extrahiert Wert aus JSON-Payload. Leer lassen für rohe Werte.
 Multiplikator 0.001 für Wh→kWh, 1000 für MWh→kWh verwenden.`,mqttStateHint:`JSON-Pfad extrahiert Wert aus JSON-Payload. Leer lassen für rohe Werte.
-EIN-Wert: der genaue String der "EIN" bedeutet. Leer lassen für Auto-Erkennung (ON, true, 1).`,restControl:"Steuerung",restOnUrl:"Einschalt-URL",restOffUrl:"Ausschalt-URL",restOnBody:"EIN-Anforderungstext",restOffBody:"AUS-Anforderungstext",restMethod:"HTTP-Methode",restHeaders:"Custom Headers (JSON)",restStatusUrl:"Status-URL",restStatusPath:"JSON-Pfad für Status",restStatusOnValue:"EIN-Wert",restPowerUrl:"Strom-URL",restPowerPath:"JSON-Pfad für Leistung",restPowerMultiplier:"Power Multiplikator",restEnergyUrl:"Energie URL",restEnergyPath:"JSON-Pfad für Energie",restEnergyMultiplier:"Energie Multiplikator",restUrlRequired:"Mindestens eine URL (ON oder OFF) ist für REST-Steckdosen erforderlich",restHeadersHint:'z. B. {"Authorization": "Bearer your-token"}',restBodyHint:'z. B. ON, {"state": "on"}',restStatusHint:"URL zum Abfragen des aktuellen Status",restPathHint:"z. B. state oder data.power.status",restPowerUrlHint:"Eigene URL für Leistungsdaten (nutzt Status URL wenn leer)",restEnergyUrlHint:"Eigene URL für Energiedaten (nutzt Status URL wenn leer)",restEnergyHint:"Jeder Wert kann eine eigene URL verwenden oder auf die Status URL zurückgreifen. Multiplikatoren für Einheitenumrechnung verwenden (z.B. 0.001 für Wh zu kWh).",testConnection:"Verbindung testen",connectionSuccess:"Verbindung erfolgreich",noSwitchesInSwitchbar:"Keine Schalter in der Schaltleiste",enableSwitchbarHint:'"In Schaltleiste anzeigen" unter Einstellungen > Smart Plugs aktivieren'},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"E-Mail",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"SMTP-E-Mail-Benachrichtigungen",telegram:"Benachrichtigungen über Telegram-Bot",discord:"An Discord-Kanal per Webhook senden",ntfy:"Kostenlose, selbst-hostbare Push-Benachrichtigungen",pushover:"Einfache, zuverlässige Push-Benachrichtigungen",callmebot:"Kostenlose WhatsApp-Benachrichtigungen über CallMeBot",webhook:"Generischer HTTP-POST an beliebige URL",homeassistant:"Dauerhafte Benachrichtigungen im Home Assistant Dashboard"},lastSuccess:"Zuletzt: {{date}}",error:"Fehler",printer:"Drucker:",allPrinters:"Alle Drucker",sendTestNotification:"Testbenachrichtigung senden",eventSettings:"Ereigniseinstellungen",enabled:"Aktiviert",sendFromProvider:"Benachrichtigungen von diesem Anbieter senden",printEvents:"Druckereignisse",printerStatus:"Druckerstatus",amsAlarms:"AMS-Alarme",amsHtAlarms:"AMS-HT-Alarme",printQueue:"Druckwarteschlange",start:"Start",plateCheck:"Plattenkontrolle",complete:"Abgeschlossen",failed:"Fehlgeschlagen",stopped:"Gestoppt",progress:"Fortschritt",offline:"Offline",lowFilament:"Filament niedrig",maintenance:"Wartung",amsHumidity:"AMS-Feuchtigkeit",amsTemp:"AMS-Temperatur",amsHtHumidity:"AMS-HT-Feuchtigkeit",amsHtTemp:"AMS-HT-Temperatur",bedCooled:"Bett abgekühlt",firstLayer:"Erste Schicht",quiet:"Ruhe",digest:"Zusammenfassung {{time}}",printStarted:"Druck gestartet",plateNotEmpty:"Platte nicht leer",plateNotEmptyDescription:"Objekte vor dem Druck erkannt",printCompleted:"Druck abgeschlossen",bedCooledLabel:"Bett abgekühlt",bedCooledDescription:"Bett nach dem Druck unter Schwellenwert abgekühlt",firstLayerCompleteLabel:"Erste Schicht fertig",firstLayerCompleteDescription:"Benachrichtigung mit Foto nach erster Schicht",missingSpoolAssignmentLabel:"Fehlende Spulenzuordnung",missingSpoolAssignmentDescription:"Benachrichtigen, wenn ein Druck startet und benoetigte Schaechte keine zugeordnete Spule haben",printFailed:"Druck fehlgeschlagen",printStopped:"Druck gestoppt",progressMilestones:"Fortschrittsmeilensteine",progressMilestonesDescription:"Benachrichtigung bei 25%, 50%, 75%",printerOffline:"Drucker offline",printerError:"Druckerfehler",lowFilamentLabel:"Filament niedrig",maintenanceDue:"Wartung fällig",maintenanceDueDescription:"Benachrichtigen, wenn Wartung erforderlich ist",amsHumidityHigh:"AMS-Feuchtigkeit hoch",amsHumidityHighDescription:"Normale AMS-Feuchtigkeit überschreitet Schwellenwert",amsTemperatureHigh:"AMS-Temperatur hoch",amsTemperatureHighDescription:"Normale AMS-Temperatur überschreitet Schwellenwert",amsHtHumidityHigh:"AMS-HT-Feuchtigkeit hoch",amsHtHumidityHighDescription:"AMS-HT-Feuchtigkeit überschreitet Schwellenwert",amsHtTemperatureHigh:"AMS-HT-Temperatur hoch",amsHtTemperatureHighDescription:"AMS-HT-Temperatur überschreitet Schwellenwert",inventoryAlerts:"Bestandswarnungen",stockReorderAlert:"Nachbestellungswarnung",stockReorderAlertDescription:"SKU hat seinen Nachbestellungspunkt erreicht",stockBreakAlert:"Bestandsunterbrechungswarnung",stockBreakAlertDescription:"Der Bestand wird vor dem Eintreffen der Nachbestellung aufgebraucht sein",jobAdded:"Auftrag hinzugefügt",jobAddedDescription:"Auftrag zur Warteschlange hinzugefügt",jobAssigned:"Auftrag zugewiesen",jobAssignedDescription:"Modellbasierter Auftrag einem Drucker zugewiesen",jobStarted:"Auftrag gestartet",jobStartedDescription:"Warteschlangenauftrag hat Druck begonnen",jobWaiting:"Auftrag wartet",jobWaitingDescription:"Auftrag wartet auf Filament oder Drucker",jobSkipped:"Auftrag übersprungen",jobSkippedDescription:"Auftrag übersprungen (vorheriger fehlgeschlagen)",jobFailed:"Auftrag fehlgeschlagen",jobFailedDescription:"Auftrag konnte nicht gestartet werden",queueComplete:"Warteschlange abgeschlossen",queueCompleteDescription:"Alle Warteschlangenaufträge beendet",quietHours:"Ruhezeiten",noNotificationsDuring:"Keine Benachrichtigungen während dieser Zeiten",editProviderToChangeQuietHours:"Anbieter bearbeiten, um Ruhezeiten zu ändern",dailyDigest:"Tägliche Zusammenfassung",batchNotifications:"Benachrichtigungen zu einer täglichen Zusammenfassung bündeln",sendAt:"Senden um {{time}}",editProviderToChangeDigestTime:"Anbieter bearbeiten, um Zusammenfassungszeit zu ändern",edit:"Bearbeiten",deleteProvider:"Benachrichtigungsanbieter löschen",deleteConfirm:'Sind Sie sicher, dass Sie "{{name}}" löschen möchten? Dies kann nicht rückgängig gemacht werden.',delete:"Löschen",addTitle:"Benachrichtigungsanbieter hinzufügen",editTitle:"Benachrichtigungsanbieter bearbeiten",nameLabel:"Name *",namePlaceholder:"Meine Benachrichtigungen",providerTypeLabel:"Anbietertyp *",configuration:"Konfiguration",testConfiguration:"Konfiguration testen",printerFilter:"Druckerfilter",onlyFromPrinter:"Nur Benachrichtigungen für Ereignisse von diesem Drucker senden",quietHoursDnd:"Ruhezeiten (Nicht stören)",quietStart:"Start",quietEnd:"Ende",dailyDigestLabel:"Tägliche Zusammenfassung",sendDigestAt:"Zusammenfassung senden um",digestCollected:"Ereignisse werden gesammelt und als einzelne Zusammenfassung zu dieser Zeit gesendet",notificationEvents:"Benachrichtigungsereignisse",progressPercent:"(25 %, 50 %, 75 %)",bedCooledAfterPrint:"(nach Druckabschluss)",eventPriority:{sectionTitle:"ntfy-Priorität",helpNtfy:"Wähle eine Priorität pro aktiviertem Ereignis. ntfy nutzt diese, um Hinweise (Ton, Sichtbarkeit, Push-Verhalten) zu eskalieren. Hier nicht gesetzte Stufen verwenden den ntfy-Server-Standard.",min:"Min.",low:"Niedrig",default:"Standard",high:"Hoch",urgent:"Dringend"},cancel:"Abbrechen",save:"Speichern",add:"Hinzufügen",nameRequired:"Name ist erforderlich",fieldRequired:"{{field}} ist erforderlich",phoneNumber:"Telefonnummer",apiKey:"API-Schlüssel",serverUrl:"Server-URL",topic:"Thema",authToken:"Auth-Token",userKey:"Benutzerschlüssel",appToken:"App-Token",priority:"Priorität",botToken:"Bot-Token",chatId:"Chat-ID",smtpServer:"SMTP-Server",smtpPort:"SMTP-Port",security:"Sicherheit",authentication:"Authentifizierung",username:"Benutzername",password:"Passwort",fromEmail:"Absender-E-Mail",toEmail:"Empfänger-E-Mail",webhookUrl:"Webhook-URL",payloadFormat:"Payload-Format",authorization:"Autorisierung",titleFieldName:"Titel-Feldname",messageFieldName:"Nachrichten-Feldname",editTemplate:"Vorlage bearbeiten: {{name}}",titleLabel:"Titel",bodyLabel:"Inhalt",titlePlaceholder:"Benachrichtigungstitel...",bodyPlaceholder:"Benachrichtigungsinhalt...",availableVariables:"Verfügbare Variablen",clickToInsert:"Klicken, um an Cursorposition im Inhalt einzufügen",livePreview:"Live-Vorschau",hide:"Ausblenden",show:"Anzeigen",loadingPreview:"Vorschau wird geladen...",enterTemplateContent:"Vorlageninhalt eingeben, um Vorschau zu sehen",titlePreview:"Titel:",bodyPreview:"Inhalt:",resetToDefault:"Auf Standard zurücksetzen",titleRequired:"Titel ist erforderlich",bodyRequired:"Inhalt ist erforderlich",notificationLog:"Benachrichtigungsprotokoll",showFailedOnly:"Nur fehlgeschlagene",last24Hours:"Letzte 24 Stunden",last7Days:"Letzte 7 Tage",last30Days:"Letzte 30 Tage",last90Days:"Letzte 90 Tage",justNow:"Gerade eben",noFailedNotifications:"Keine fehlgeschlagenen Benachrichtigungen",noNotificationsLogged:"Keine Benachrichtigungen protokolliert",unknownProvider:"Unbekannter Anbieter",logTitle:"Titel",logMessage:"Nachricht",logError:"Fehler",logProvider:"Anbieter: {{type}}",logTime:"Zeit: {{time}}",refresh:"Aktualisieren",clearOld:"Alte löschen",statsSummary:"Letzte {{days}} Tage:",statsNotifications:"Benachrichtigungen",statsSent:"{{count}} gesendet",statsFailed:"{{count}} fehlgeschlagen",eventTypes:{print_start:"Druck gestartet",print_complete:"Druck abgeschlossen",print_failed:"Druck fehlgeschlagen",print_stopped:"Druck gestoppt",print_progress:"Fortschritt",printer_offline:"Drucker offline",printer_error:"Druckerfehler",filament_low:"Filament niedrig",maintenance_due:"Wartung fällig",test:"Test"},userEmail:{title:"Benachrichtigungen",emailNotifications:"E-Mail-Benachrichtigungen",emailNotificationsDesc:"Erhalten Sie E-Mail-Benachrichtigungen für Ihre eigenen Druckaufträge. E-Mails werden über die in der erweiterten Authentifizierung konfigurierten SMTP-Einstellungen gesendet.",sendingTo:"Benachrichtigungen werden gesendet an",noEmailWarning:"Ihr Konto hat keine E-Mail-Adresse. Wenden Sie sich an einen Administrator, um eine hinzuzufügen.",printJobNotifications:"Druckauftrags-Benachrichtigungen",printJobNotificationsDesc:"Wählen Sie aus, welche Ereignisse E-Mail-Benachrichtigungen für von Ihnen gesendete Druckaufträge auslösen.",printJobStarts:"Druckauftrag startet",printJobStartsDesc:"Benachrichtigt werden, wenn Ihr Druckauftrag beginnt.",printJobFinishes:"Druckauftrag fertig",printJobFinishesDesc:"Benachrichtigt werden, wenn Ihr Druckauftrag erfolgreich abgeschlossen wurde.",printErrors:"Druckfehler",printErrorsDesc:"Benachrichtigt werden, wenn Ihr Druckauftrag fehlschlägt oder auf einen Fehler stößt.",printJobStops:"Druckauftrag gestoppt",printJobStopsDesc:"Benachrichtigt werden, wenn Ihr Druckauftrag abgebrochen oder gestoppt wird.",saveSuccess:"Benachrichtigungseinstellungen gespeichert.",saveError:"Benachrichtigungseinstellungen konnten nicht gespeichert werden."}},richTextEditor:{bold:"Fett",italic:"Kursiv",underline:"Unterstrichen",bulletList:"Aufzählungsliste",numberedList:"Nummerierte Liste",alignLeft:"Linksbündig",alignCenter:"Zentriert",alignRight:"Rechtsbündig",addLink:"Link hinzufügen",removeLink:"Link entfernen"},externalLinks:{noLinksConfigured:"Keine externen Links konfiguriert",deleteLink:"Link löschen",removeCustomIcon:"Benutzerdefiniertes Symbol entfernen",openInNewTab:"In neuem Tab öffnen",placeholders:{linkName:"Mein Link"}},keyboardShortcuts:{title:"Tastaturkürzel",navigation:"Navigation",archivesSection:"Archive",kProfilesSection:"K-Profile",generalSection:"Allgemein",shortcuts:{goToPrinters:"Zu Drucker gehen",goToArchives:"Zu Archiv gehen",goToQueue:"Zur Warteschlange gehen",goToStats:"Zu Statistiken gehen",goToProfiles:"Zu Cloud-Profilen gehen",goToSettings:"Zu Einstellungen gehen",focusSearch:"Suche fokussieren",openUploadModal:"Upload-Modal öffnen",clearSelection:"Auswahl löschen / Eingabe aufheben",contextMenu:"Kontextmenü auf Karten",refreshProfiles:"Profile aktualisieren",newProfile:"Neues Profil",exitSelectionMode:"Auswahlmodus beenden",showHelp:"Diese Hilfe anzeigen"},footer:"Drücken Sie Esc oder klicken Sie außerhalb, um zu schließen"},notificationLog:{title:"Benachrichtigungsprotokoll",events:{printStarted:"Druck gestartet",printComplete:"Druck abgeschlossen",printFailed:"Druck fehlgeschlagen",printStopped:"Druck gestoppt",progress:"Fortschritt",printerOffline:"Drucker offline",printerError:"Druckerfehler",lowFilament:"Wenig Filament",maintenanceDue:"Wartung fällig",test:"Test"},timeAgo:{justNow:"Gerade eben",minutesAgo:"vor {{minutes}}m",hoursAgo:"vor {{hours}}h"}},restoreBackup:{title:"Backup wiederherstellen",restoring:"Wird wiederhergestellt...",restoreComplete:"Wiederherstellung abgeschlossen",restoreFailed:"Wiederherstellung fehlgeschlagen",importSettings:"Einstellungen aus Backup-Datei importieren",pleaseWait:"Bitte warten Sie, während Ihre Daten wiederhergestellt werden",clickToSelect:"Klicken Sie, um Backup-Datei auszuwählen (.json oder .zip)",howDuplicateHandling:"So funktioniert die Duplikatbehandlung:",categories:{printers:"Drucker",smartPlugs:"Smart Plugs",notificationProviders:"Benachrichtigungsanbieter",filaments:"Filamente",archives:"Archive",pendingUploads:"Ausstehende Uploads",settingsTemplates:"Einstellungen & Vorlagen"},matchingInfo:{printers:"abgeglichen nach Seriennummer",smartPlugs:"abgeglichen nach IP-Adresse",notificationProviders:"abgeglichen nach Name",filaments:"abgeglichen nach Name + Typ + Marke",archives:"abgeglichen nach Inhalts-Hash",pendingUploads:"abgeglichen nach Dateiname",settingsTemplates:"immer überschrieben"},replaceExisting:"Vorhandene Daten ersetzen",keepExisting:"Vorhandene Daten behalten",replaceDescription:"Bereits vorhandene Elemente mit Backup-Daten überschreiben",keepDescription:"Nur Elemente wiederherstellen, die noch nicht existieren",caution:"Vorsicht:",cautionText:"Das Überschreiben ersetzt Ihre aktuellen Konfigurationen durch Backup-Daten. Drucker-Zugangscodes werden aus Sicherheitsgründen niemals überschrieben.",itemsRestored:"Wiederhergestellte Elemente",itemsSkipped:"Übersprungene Elemente",restored:"Wiederhergestellt",skipped:"Übersprungen (existieren bereits)",filesLabel:"Dateien (3MF, Thumbnails, etc.)",newApiKeysGenerated:"Neue API-Schlüssel generiert",newApiKeysWarning:"Diese Schlüssel werden nur einmal angezeigt. Kopieren Sie sie jetzt!",processingBackup:"Backup-Datei wird verarbeitet...",noDataFound:"In der Backup-Datei wurden keine wiederherzustellenden Daten gefunden.",failedToRestore:"Backup konnte nicht wiederhergestellt werden. Bitte überprüfen Sie das Dateiformat."},backupExport:{title:"Backup exportieren",selectData:"Zu exportierende Daten auswählen",selectAll:"Alle auswählen",selectNone:"Keine auswählen",categoryDescriptions:{settings:"Sprache, Theme, Update-Einstellungen",notifications:"ntfy, Pushover, Discord, usw.",templates:"Benutzerdefinierte Nachrichtenvorlagen",smartPlugs:"Tasmota-Plug-Konfigurationen",externalLinks:"Seitenleiste Links zu externen Diensten",printers:"Druckerinformationen (Zugangscodes ausgeschlossen)",plateDetection:"Leere Platten-Referenzbilder",filaments:"Filamenttypen und -kosten",maintenance:"Benutzerdefinierte Wartungspläne",archives:"Alle Druckdaten + Dateien (3MF, Thumbnails, Fotos)",projects:"Projekte, BOM-Elemente und Anhänge",pendingUploads:"Virtueller Drucker-Uploads zur Überprüfung",apiKeys:"Webhook-API-Schlüssel (neue Schlüssel bei Import generiert)"},requiresPrinters:"Drucker müssen ausgewählt sein",zipFileWarning:"ZIP-Datei wird erstellt.",zipFileDescription:"Enthält alle 3MF-Dateien, Thumbnails, Zeitraffer und Fotos. Dies kann eine Weile dauern und zu einer großen Datei führen.",includeAccessCodes:"Zugangscodes einschließen",includeAccessCodesDescription:"Für die Übertragung auf eine andere Maschine",includeAccessCodesWarning:"Zugangscodes werden im Klartext eingeschlossen. Bewahren Sie diese Backup-Datei sicher auf!",categoriesSelected:"{{selectedCount}} Kategorien ausgewählt"},pendingUploads:{placeholders:{notes:"Notizen zu diesem Druck hinzufügen..."},discardUpload:"Upload verwerfen",archiveAllUploads:"Alle Uploads archivieren",discardAllUploads:"Alle Uploads verwerfen",archive:"Archivieren",timeAgo:{justNow:"Gerade eben",minutesAgo:"vor {{minutes}}m",hoursAgo:"vor {{hours}}h",daysAgo:"vor {{days}}d"}},apiBrowser:{placeholders:{requestBody:"JSON-Anforderungstext...",searchEndpoints:"Endpunkte suchen..."}},configureAmsSlot:{title:"AMS-Slot konfigurieren",slotConfigured:"Slot konfiguriert!",configuringSlot:"Slot wird konfiguriert:",slotLabel:"{{ams}} – Slot {{slot}}",searchPresets:"Voreinstellungen suchen...",colorPlaceholder:"Farbname oder Hex (z.B. braun, FF8800)",clearCustomColor:"Benutzerdefinierte Farbe löschen",noCloudPresets:"Keine Cloud-Voreinstellungen. Melden Sie sich bei Bambu Cloud an, um zu synchronisieren.",noPresetsAvailable:"Keine Voreinstellungen verfügbar. Melden Sie sich bei Bambu Cloud an oder importieren Sie lokale Profile.",noMatchingPresets:"Keine passenden Voreinstellungen gefunden.",custom:"Benutzerdefiniert",builtin:"Integriert",settingsSentToPrinter:"Einstellungen an Drucker gesendet",filamentProfile:"Filamentprofil",kProfileLabel:"K-Profil (Pressure Advance)",filteringFor:"Filtern nach: {{material}}",noKProfile:"Kein K-Profil (Standard 0.020 verwenden)",noMatchingKProfiles:"Keine passenden K-Profile gefunden. Standard K=0.020 wird verwendet.",selectFilamentFirst:"Zuerst ein Filamentprofil auswählen",kFromCalibration:"K={{value}} aus Druckerkalibrierung",customColorLabel:"Benutzerdefinierte Farbe (optional)",presetColors:"{{name}} Farben:",showLessColors:"Weniger Farben anzeigen",showMoreColors:"Mehr Farben anzeigen",clear:"Löschen",hexLabel:"Hex – #{{hex}}",resetting:"Wird zurückgesetzt...",resetSlot:"Slot zurücksetzen",cancel:"Abbrechen",configuring:"Wird konfiguriert...",configureSlot:"Slot konfigurieren"},githubBackup:{title:"Git-Backup",history:"Verlauf",downloadBackup:"Backup herunterladen",restoreBackup:"Backup wiederherstellen",noBackupsYet:"Noch keine Backups"},emailSettings:{placeholders:{fromName:"Bambuddy"}},tagManagement:{searchTags:"Tags suchen...",renameTag:"Tag umbenennen",deleteTag:"Tag löschen"},notificationTemplates:{placeholders:{title:"Benachrichtigungstitel...",body:"Benachrichtigungstext..."}},batchTag:{placeholders:{newTag:"Neuen Tag eingeben..."}},photoGallery:{deletePhoto:"Foto löschen"},filamentHoverCard:{copySpoolUuid:"Spulen-UUID kopieren"},kProfilesView:{hasNote:"Hat Notiz",copyProfile:"Profil kopieren"},layout:{openMenu:"Menü öffnen",noPermissionSystemInfo:"Sie haben keine Berechtigung zum Anzeigen von Systeminformationen"},dashboard:{dragToReorder:"Ziehen zum Neuordnen",hideWidget:"Widget ausblenden"},notificationProviderCard:{deleteNotificationProvider:"Benachrichtigungsanbieter löschen"},fileManagerModal:{closeFileManager:"Dateimanager schließen",sortFiles:"Dateien sortieren",goToParentFolder:"Zum übergeordneten Ordner gehen",threeView:"3D-Ansicht"},embeddedCameraViewer:{refreshStream:"Stream aktualisieren",close:"Schließen",zoomOut:"Verkleinern",resetZoom:"Zoom zurücksetzen",zoomIn:"Vergrößern",dragToResize:"Ziehen zum Größe ändern"},timelapseViewer:{skipBack5s:"5s zurückspringen",skipForward5s:"5s vorspringen"},notificationProviders:{descriptions:{email:"SMTP-E-Mail-Benachrichtigungen",telegram:"Benachrichtigungen über Telegram-Bot",discord:"An Discord-Kanal über Webhook senden",ntfy:"Kostenlose, selbst hostbare Push-Benachrichtigungen",pushover:"Einfache, zuverlässige Push-Benachrichtigungen",callmebot:"Kostenlose WhatsApp-Benachrichtigungen über CallMeBot",webhook:"Generischer HTTP POST zu beliebiger URL"}},logViewer:{searchPlaceholder:"Nachricht oder Logger-Name suchen...",noLogEntries:"Keine Logeinträge gefunden"},switchbarPopover:{noSwitchesInSwitchbar:"Keine Schalter in Schalterleiste"},projectPageModal:{placeholders:{title:"Titel",designer:"Designer",license:"Lizenz",description:"Beschreibung eingeben...",profileTitle:"Profil-Titel",profileDescription:"Profilbeschreibung..."}},spoolmanSettings:{},time:{unknown:"-",waiting:"Wartend",justNow:"Gerade eben",now:"Jetzt",minsAgo:"vor {{count}}m",inMins:"in {{count}}min",hoursAgo:"vor {{count}}h",inHours:"in {{count}}Std",daysAgo:"vor {{count}}d",inDays:"in {{count}}T"},spoolbuddy:{nav:{dashboard:"Übersicht",ams:"AMS",inventory:"Inventar",writeTag:"Schreiben",settings:"Einstellungen"},status:{nfcReady:"NFC bereit",nfcOff:"NFC aus",offline:"Offline",online:"Online",noPrinters:"Keine Drucker",deviceOffline:"Gerät offline",waitingConnection:"Warte auf Geräteverbindung...",systemReady:"System bereit",status:"Status"},dashboard:{readyToScan:"Bereit zum Scannen",idleMessage:"Spule auf die Waage legen zum Identifizieren",nfcHint:"NFC-Tag wird automatisch gelesen",device:"Gerät",syncWeight:"Gewicht sync.",weightSynced:"Synchronisiert!",unknownTag:"Unbekannter Tag",newTag:"Neuer Tag erkannt",onScale:"auf der Waage",linkSpool:"Mit Spule verknüpfen",linkTagTitle:"Tag mit Spule verknüpfen",linkTag:"Tag verknüpfen",selectSpool:"Spule zum Verknüpfen auswählen:",noUntagged:"Keine Spulen ohne Tags gefunden",tagDetected:"Tag erkannt",noTag:"Kein Tag",tagId:"Tag",grossWeight:"Bruttogewicht",spoolSize:"Spulengröße",close:"Schließen",currentSpool:"Aktuelle Spule",plateReady:"Druckplatte bereit: {{name}}",plateReadyLabel:"Bereit-zum-Quittieren-Liste",plateClearAction:"Frei",plateClearedToast:"Druckplatte als geleert markiert",plateClearFailed:"Druckplatte konnte nicht als geleert markiert werden"},modal:{spoolDetected:"Spule erkannt",assignToAms:"AMS zuweisen",syncWeight:"Gewicht sync.",weightSynced:"Synchronisiert!",syncing:"Synchronisiere...",newTagDetected:"Neuer Tag erkannt",addToInventory:"Zum Inventar hinzufügen",assignToAmsTitle:"AMS zuweisen",selectSlot:"Slot auswählen",assign:"Zuweisen",assigning:"Zuweisen...",assignSuccess:"Zugewiesen!",assignPendingInsert:"Zugewiesen. Slot wird beim Einsetzen der Spule konfiguriert.",assignError:"Fehler beim Zuweisen. Bitte erneut versuchen.",noPrinterSelected:"Drucker auswählen...",noAmsDetected:"Kein AMS an diesem Drucker erkannt",slot:"Slot"},weight:{noReading:"Kein Messwert",stable:"Stabil",measuring:"Messen...",tare:"Tarieren",calibrate:"Kalibrieren"},spool:{remaining:"Verbleibend",material:"Material",brand:"Marke",color:"Farbe",coreWeight:"Kern",labelWeight:"Etikett",scaleWeight:"Waage",netWeight:"Netto",lastUsed:"Zuletzt verwendet"},ams:{noData:"Kein AMS erkannt",connectAms:"AMS anschließen um Filament-Slots zu sehen",noPrinter:"Kein Drucker ausgewählt",selectPrinter:"Drucker in der oberen Leiste auswählen",printerDisconnected:"Drucker getrennt",humidity:"Feuchtigkeit",level:"Stufe",active:"Aktiv",slot:"Slot",empty:"Leer"},inventory:{search:"Spulen suchen...",empty:"Keine Spulen im Inventar",noResults:"Keine passenden Spulen",spools:"Spulen",addSpool:"Spule hinzufügen"},settings:{tabDevice:"Gerät",tabDisplay:"Anzeige",tabScale:"Waage",tabUpdates:"Aktualisierungen",nfcReader:"NFC-Leser",type:"Typ",connection:"Verbindung",notConnected:"N/V",deviceInfo:"Geräteinfo",hostname:"Host",uptime:"Betriebszeit",systemConfig:"Backend & Auth",backendUrl:"Bambuddy Backend URL",apiToken:"API-Token",apiTokenPlaceholder:"API-Token eingeben",saveConfig:"Konfiguration speichern",systemQueued:"Konfiguration in Warteschlange.",nfcDiagnostic:"NFC-Diagnose",scaleDiagnostic:"Waagen-Diagnose",readTagDiagnostic:"Tag-Lese-Diagnose",testNfc:"Leser testen",testScale:"Genauigkeit testen",testReadTag:"Tag lesen",systemFieldsRequired:"Backend-URL ist erforderlich.",brightness:"Helligkeit",saved:"Gespeichert",noBacklight:"Keine DSI-Hintergrundbeleuchtung erkannt. Helligkeitssteuerung erfordert ein DSI-Display.",screenBlank:"Bildschirm-Abschaltzeit",screenBlankDesc:"Bildschirm schaltet sich nach Inaktivität ab. Zum Aufwecken berühren.",displayNote:"Helligkeit wird als Software-Filter angewendet.",scaleCalibration:"Waagen-Kalibrierung",currentWeight:"Aktuelles Gewicht",tareOffset:"Tara",calFactor:"Faktor",knownWeight:"Bekanntes Gewicht",calStep1:"Alle Gegenstände von der Waage entfernen und Nullpunkt setzen.",calStep2:"Bekanntes Gewicht auf die Waage legen.",setZero:"Nullpunkt setzen",calibrateNow:"Kalibrieren",calibrated:"Kalibriert",tareSet:"Tara-Befehl gesendet. Warte auf Gerät...",tareComplete:"Tara abgeschlossen!",tareTimedOut:"Tara-Zeitüberschreitung — läuft der SpoolBuddy-Daemon?",tareFailed:"Tara-Befehl fehlgeschlagen",zeroSet:"Nullpunkt gesetzt. Bekanntes Gewicht auf die Waage legen.",calibrationDone:"Kalibrierung abgeschlossen!",calibrationFailed:"Kalibrierung fehlgeschlagen",lastCalibrated:"Zuletzt kalibriert",stable:"Stabil",settling:"Stabilisierung...",firmware:"Firmware",scale:"Waage",noDevice:"Kein SpoolBuddy-Gerät gefunden",daemonVersion:"Daemon-Version",currentVersion:"Aktuell",versionPending:"Warte auf Daemon...",checking:"Prüfe...",checkUpdates:"Nach Updates suchen",updateAvailable:"Update verfügbar",updateInstructions:"Update per SSH: SpoolBuddy-Installationsskript ausführen.",upToDate:"Aktuell",includeBeta:"Beta-Versionen einschließen"},writeTag:{tabExisting:"Vorhandene Spule",tabNew:"Neue Spule",tabReplace:"Tag ersetzen",searchPlaceholder:"Suche nach Material, Farbe, Marke...",noUntaggedSpools:"Keine Spulen ohne Tags",noTaggedSpools:"Keine Spulen mit Tags",selectSpool:"Spule auswählen, dann einen NTAG auf den Leser legen",placeTag:"NTAG auf den Leser legen",tagReady:"Tag erkannt — bereit zum Schreiben",writeTag:"Tag beschreiben",replaceTag:"Tag ersetzen",writing:"Tag wird beschrieben...",waiting:"Warte auf SpoolBuddy...",writeSuccess:"Tag erfolgreich beschrieben!",writeFailed:"Schreiben fehlgeschlagen",queueFailed:"Schreibbefehl konnte nicht eingereiht werden",tryAgain:"Erneut versuchen",cancel:"Abbrechen",replaceWarning:"Alter Tag wird getrennt. Neuer Tag ersetzt ihn.",deviceOffline:"SpoolBuddy ist offline",material:"Material",colorName:"Farbname",color:"Farbe",brand:"Marke",weight:"Gewicht (g)",createSpool:"Spule erstellen",creating:"Wird erstellt...",spoolCreated:"Spule erstellt! Bereit zum Schreiben.",createFailed:"Spule konnte nicht erstellt werden",incompleteDataWarning:"Tag mit unvollständigen Spoolman-Daten geschrieben"},quickMenu:{printerPower:"Drucker-Strom",systemControls:"System",restartDaemon:"Daemon neustarten",restartBrowser:"Browser neustarten",reboot:"Neustart",shutdown:"Herunterfahren",swipeToClose:"Nach unten wischen zum Schließen",confirmTitle:"Bestätigen",confirmShutdown:"Möchten Sie das SpoolBuddy wirklich herunterfahren? Sie benötigen physischen Zugang, um es wieder einzuschalten.",confirmReboot:"Möchten Sie das SpoolBuddy wirklich neu starten?",confirmRestartDaemon:"SpoolBuddy-Daemon neustarten? NFC und Waage sind vorübergehend nicht verfügbar.",confirmRestartBrowser:"Kiosk-Browser neustarten? Das Display wird kurz schwarz.",confirm:"Bestätigen",confirmPlugOn:"{{name}} einschalten?",confirmPlugOff:"{{name}} ausschalten?",turnOn:"Einschalten",turnOff:"Ausschalten"}},diagnostic:{modalTitle:"Verbindungsdiagnose — {{name}}",running:"Diagnose läuft...",runningElapsed:"Diagnose läuft... ({{elapsed}}s)",waitingForReportHint:"Warten darauf, dass der Drucker einen Statusbericht sendet — kann bis zu {{max}} Sekunden dauern.",runFailed:"Diagnose konnte nicht ausgeführt werden: {{error}}",retry:"Erneut ausführen",runButton:"Diagnose ausführen",sectionTitle:"Verbindungsdiagnose",sectionDescription:"Prüfen, warum ein Drucker keine Verbindung herstellt oder nicht druckt — Port-Erreichbarkeit, LAN-Entwicklermodus, Docker-Netzwerkmodus und Zugangsdaten.",noPrinters:"Keine Drucker konfiguriert.",overall:{ok:"Keine Probleme gefunden — die Druckerverbindung sieht gut aus.",warnings:"Der Drucker sollte funktionieren, aber einige Punkte erfordern Aufmerksamkeit.",problems:"Probleme gefunden, die erklären, warum der Drucker keine Verbindung herstellt oder nicht druckt."},check:{port_mqtt:{title:"Steuerungsport (MQTT 8883)",pass:"Erreichbar — der Drucker akzeptiert Steuerungsverbindungen.",fail:"Port 8883 ist nicht erreichbar. Der Drucker ist ausgeschaltet, hat eine andere IP-Adresse oder eine Firewall blockiert ihn. Überprüfen Sie die Drucker-IP und dass nichts Port 8883 blockiert."},port_ftps:{title:"Dateiübertragungsport (FTPS 990)",pass:"Erreichbar — das Senden von Druckdateien funktioniert.",warn:"Port 990 ist nicht erreichbar. Die Überwachung funktioniert möglicherweise weiterhin, aber das Senden von Drucken an den Drucker schlägt fehl. Stellen Sie sicher, dass Port 990 nicht blockiert ist."},port_rtsps:{title:"Kameraport (RTSPS 322)",pass:"Erreichbar — der Kamerastream funktioniert.",warn:"Port 322 ist nicht erreichbar. Die Live-Kameraansicht funktioniert nicht. Dies betrifft das Drucken nicht."},network_mode:{title:"Docker-Netzwerkmodus",pass:"Läuft im Host-Netzwerkmodus.",warn:'Bambuddy läuft im Docker-Bridge-Netzwerkmodus. Die Druckererkennung und der virtuelle Drucker benötigen den Host-Netzwerkmodus — erstellen Sie den Container mit "network_mode: host" neu.',skip:"Läuft nicht in Docker — nicht zutreffend."},subnet:{title:"Netzwerk-Subnetz",pass:"Drucker und Bambuddy befinden sich im selben Subnetz.",warn:"Der Drucker ({{printer_ip}}) und Bambuddy ({{host_ip}}) befinden sich in unterschiedlichen Subnetzen. Sie können sich möglicherweise nicht erreichen, sofern kein Routing zwischen den Subnetzen konfiguriert ist.",skip:"Subnetz konnte nicht ermittelt werden — übersprungen."},mqtt_auth:{title:"Drucker-Zugangsdaten",pass:"Der Drucker hat die Verbindung akzeptiert.",fail:"Der Drucker ist erreichbar, hat die Verbindung aber abgelehnt. Der Zugangscode oder die Seriennummer ist höchstwahrscheinlich falsch. Der Zugangscode ändert sich bei jedem Umschalten des Entwicklermodus — kopieren Sie ihn erneut vom Druckerbildschirm.",skip:"Nicht geprüft — der Drucker konnte nicht erreicht werden."},developer_mode:{title:"LAN-Entwicklermodus",pass:"Der Entwicklermodus ist aktiviert.",fail:"Der Entwicklermodus ist am Drucker AUS. Aktivieren Sie ihn in den LAN-Einstellungen des Druckers — und bestätigen Sie mit OK. Ohne ihn starten Drucke nicht.",skip:"Konnte nicht geprüft werden — erfordert eine aktive Verbindung zum Drucker."},printer_publishing:{title:"Drucker sendet Statusmeldungen",pass:"Der Drucker sendet Statusmeldungen — AMS, Filamente und K-Profile werden korrekt zum Slicer gespiegelt.",fail:"Der MQTT-Broker hat die Verbindung akzeptiert, der Drucker sendet aber keine Statusmeldungen. Fast immer liegt eine falsche oder falsch geschriebene Seriennummer vor — das Topic device/<serial>/report unterscheidet Groß- und Kleinschreibung. Prüfen Sie die Seriennummer in den Druckereinstellungen gegen die Anzeige am Drucker.",skip:"Konnte nicht geprüft werden — erfordert eine aktive Verbindung zum Drucker."}}},systemHealth:{sectionTitle:"Systemzustand",sectionDescription:"Durchsucht aktuelle Logs nach bekannten Problemen, die du meist selbst beheben kannst, bevor daraus ein Support-Ticket wird.",rescan:"Erneut prüfen",clean:"Keine bekannten Probleme in den letzten {{times}} Log-Einträgen gefunden.",logUnavailable:"Die Protokollierung in Dateien ist deaktiviert, daher können keine Logs durchsucht werden. Aktiviere die Datei-Protokollierung, um diese Prüfung zu nutzen.",learnMore:"Lösung anzeigen",fixLabel:"Lösung:",occurrences:"{{times}}× aufgetreten — zuletzt um {{lastSeen}}",category:{layer8:"Das kannst du beheben",environment:"Umgebung",bug:"Bitte melden"},signature:{"ftp-auth-rejected":{name:"Drucker hat den Zugriffscode abgelehnt",cause:"Der Drucker hat die Anmeldung für die Dateiübertragung abgelehnt. Der Zugriffscode ist falsch oder hat sich nach dem Umschalten des Entwicklermodus geändert.",fix:"Kopiere den Zugriffscode erneut vom Druckerbildschirm (LAN-Einstellungen) und aktualisiere ihn in den Druckereinstellungen in Bambuddy."},"ftp-connection-timeout":{name:"Zeitüberschreitung bei der Dateiübertragung",cause:"Bambuddy konnte den Dateiübertragungs-Port des Druckers (FTPS 990) nicht erreichen. Der Port ist blockiert, oder der Drucker ist aus oder in einem anderen Subnetz.",fix:"Stelle sicher, dass Port 990 zwischen Bambuddy und dem Drucker nicht blockiert wird und beide im selben Netzwerk sind."},"ftp-ssl-error":{name:"Sicherer Dateiübertragungs-Handshake fehlgeschlagen",cause:"Der TLS-Handshake mit dem Dateiübertragungs-Server des Druckers ist fehlgeschlagen. Häufig liegt das an einer Firewall oder veralteter Drucker-Firmware.",fix:"Aktualisiere die Drucker-Firmware und prüfe, dass keine Firewall oder Proxy die Verbindung auf Port 990 abfängt."},"mqtt-connection-flapping":{name:"Druckerverbindung bricht ständig ab",cause:"Die Steuerverbindung (MQTT 8883) trennt und verbindet sich wiederholt — meist wegen einer schwachen Netzwerkverbindung oder eines teilweise blockierten Ports.",fix:"Prüfe das WLAN-Signal am Drucker, bevorzuge eine Kabelverbindung und stelle sicher, dass Port 8883 zuverlässig erreichbar ist."},"camera-connection-refused":{name:"Kamera-Stream nicht erreichbar",cause:"Die Live-Kamera war auf Port RTSPS 322 nicht erreichbar. Der Port ist blockiert, oder die Kamera bzw. die LAN-Liveansicht ist am Drucker deaktiviert.",fix:"Aktiviere Kamera und LAN-Liveansicht am Drucker und stelle sicher, dass Port 322 nicht blockiert ist. Das Drucken ist davon nicht betroffen."},"database-locked":{name:"Datenbank-Schreibkonflikte",cause:'Die SQLite-Datenbank meldet unter Last "database is locked"-Fehler — häufig beim Betrieb mehrerer Drucker gleichzeitig.',fix:"Stelle Bambuddy auf eine externe PostgreSQL-Datenbank um. Siehe die PostgreSQL-Anleitung in der Dokumentation."}}},vpDiagnostic:{title:"Einrichtungsprüfung — {{name}}",runButton:"Einrichtungsprüfung ausführen",running:"Einrichtungsprüfung läuft...",runFailed:"Einrichtungsprüfung konnte nicht ausgeführt werden: {{error}}",retry:"Erneut prüfen",overall:{ok:"Alle Prüfungen bestanden — dieser virtuelle Drucker ist korrekt eingerichtet.",warnings:"Der virtuelle Drucker sollte funktionieren, aber einige Punkte brauchen Aufmerksamkeit.",problems:"Es wurden Probleme gefunden, die erklären, warum der Slicer diesen virtuellen Drucker nicht sehen oder nutzen kann."},check:{enabled:{title:"Virtueller Drucker aktiviert",fail:"Dieser virtuelle Drucker ist ausgeschaltet. Schalten Sie ihn ein, damit er erkennbar wird."},running:{title:"Dienste laufen",fail:"Der virtuelle Drucker ist aktiviert, aber seine Dienste laufen nicht. Prüfen Sie das Bambuddy-Protokoll — meist stoppt sie ein Bind-IP-Konflikt oder ein Berechtigungsfehler."},bind_interface:{title:"Bind-Netzwerkschnittstelle",fail:'Die Bind-Schnittstelle ist nicht gesetzt oder existiert auf diesem Host nicht mehr. Wählen Sie im Dropdown "Bind-Schnittstelle" eine aktuelle Schnittstelle.'},access_code:{title:"Zugangscode gesetzt",fail:"Es ist kein Zugangscode gesetzt. Dem Slicer muss derselbe 8-stellige Zugangscode angegeben werden, den Sie hier festlegen."},target_printer:{title:"Zieldrucker",fail:"Es ist kein Zieldrucker ausgewählt. Der Proxy-Modus benötigt einen echten Drucker zum Weiterleiten.",warn:"Der Zieldrucker ist gerade offline — die Weiterleitung wird fortgesetzt, sobald er sich wieder verbindet."},port_ftps:{title:"Datei-Upload-Dienst (Port {{port}})",fail:"Auf Port {{port}} der Bind-IP lauscht nichts, daher kann der Slicer keine Dateien hochladen. Ursache ist meist ein Port-Konflikt auf dieser Schnittstelle."},port_mqtt:{title:"Steuerungsdienst (Port {{port}})",fail:"Auf Port {{port}} der Bind-IP lauscht nichts, daher kann der Slicer sich nicht verbinden oder den Status anzeigen."},port_bind:{title:"Erkennungsdienst (Port {{port}})",fail:"Auf Port {{port}} der Bind-IP lauscht nichts, daher schlägt der Erkennungs-Handshake des Slicers fehl."},certificate:{title:"TLS-Zertifikat",pass:"Zertifikat bereit. Stellen Sie sicher, dass das Bambuddy-CA-Zertifikat (oben) in den Vertrauensspeicher Ihres Slicers importiert ist.",fail:"Das TLS-Zertifikat für diesen virtuellen Drucker fehlt. Prüfen Sie, ob das Bambuddy-Datenverzeichnis beschreibbar ist."}}},bugReport:{logHealthSummary:"Bekannte Probleme in deinen Logs gefunden",logHealthIntro:"Aktuelle Logs entsprechen bekannten Problemen. Sieh dir die Lösungen unten an — sie zu beheben könnte dein Problem ohne Fehlerbericht lösen. Du kannst unten trotzdem einen Bericht senden.",title:"Fehler melden",description:"Beschreibung",descriptionPlaceholder:"Was ist schiefgelaufen? Bitte beschreiben Sie das Problem...",email:"E-Mail (optional)",emailPlaceholder:"ihre@email.de",emailPrivacy:"Falls angegeben, wird Ihre E-Mail in einem eingeklappten Abschnitt des GitHub-Issues aufgeführt, damit der Betreuer sich melden kann.",screenshot:"Screenshot",uploadOrPaste:"Bild hochladen, einfügen oder ziehen",dataCollectedSummary:"Welche Daten werden im Bericht gesendet?",dataIncluded:"Enthalten:",dataIncludedList:"App-Version, Betriebssystem, Architektur, Python-Version, Datenbankstatistiken (nur Anzahl), Druckermodelle, Düsenanzahl, Firmware-Versionen, Verbindungsstatus, Integrationsstatus (Spoolman, MQTT, HA), nicht-sensible Einstellungen, Netzwerkschnittstellenanzahl, Docker-Details, Abhängigkeitsversionen.",dataNeverIncluded:"Nie enthalten:",dataNeverIncludedList:"Druckernamen, Seriennummern, Zugangscodes, Passwörter, IP-Adressen, E-Mail-Adressen, API-Schlüssel, Tokens, Webhook-URLs, Hostnamen oder Benutzernamen.",submit:"Absenden",startLogging:"Debug-Protokollierung starten",stepEnableLogging:"Debug-Protokollierung aktiviert",stepReproduce:"Problem jetzt reproduzieren",stepStopLogging:"Stoppen & Bericht senden",stopAndSubmit:"Stoppen & Senden",maxDuration:"Stoppt automatisch nach {{minutes}} Min.",stoppingLogs:"Protokolle sammeln & senden...",submitting:"Fehlerbericht wird gesendet...",submittingStepConnection:"Drucker-Verbindungsprüfungen werden ausgeführt",submittingStepVirtualPrinters:"Setup-Prüfungen für virtuelle Drucker werden ausgeführt",submittingStepLogScan:"Aktuelle Protokolle werden auf bekannte Probleme überprüft",submittingStepSubmit:"Bericht wird an GitHub gesendet",submitSuccess:"Fehlerbericht erfolgreich gesendet!",submitFailed:"Fehlerbericht konnte nicht gesendet werden",diagnosticChecking:"Druckerverbindungen werden geprüft...",diagnosticHealthy:"Verbindungsprüfung bestanden — keine Probleme an Ihren Druckern gefunden.",diagnosticSummary:"{{problems}} von {{total}} Druckern haben Verbindungsprobleme",diagnosticIntro:"Einer oder mehrere Drucker haben ein Verbindungsproblem, das die Ursache Ihres Problems sein könnte. Klappen Sie einen Drucker unten auf, um die Lösung zu sehen — sie zu beheben könnte das Problem ohne Fehlerbericht lösen. Sie können unten dennoch einen Bericht senden.",thankYou:"Vielen Dank!",submitted:"Ihr Fehlerbericht wurde eingereicht.",viewIssue:"Issue ansehen",unexpectedError:"Ein unerwarteter Fehler ist aufgetreten"},failureDetection:{title:"KI-Fehlererkennung",description:"Überwacht Drucke über eine selbst gehostete Obico-ML-API und reagiert automatisch auf erkannte Fehldrucke.",mlUrl:"Obico-ML-API-URL",mlUrlHint:"Basis-URL deines selbst gehosteten Obico-ml_api-Containers (z. B. http://192.168.1.10:3333).",test:"Testen",testSuccess:"ML-API erreichbar und funktionsfähig.",testFailed:"ML-API konnte nicht erreicht werden.",sensitivity:"Empfindlichkeit",sensitivityLow:"Niedrig (weniger Fehlalarme)",sensitivityMedium:"Mittel (ausgewogen)",sensitivityHigh:"Hoch (frühe Erkennung, mehr Fehlalarme)",sensitivityHint:"Passt die Konfidenz-Schwellwerte an, die Warnungen und Fehler auslösen.",action:"Aktion bei erkanntem Fehler",actionNotify:"Nur benachrichtigen",actionPause:"Druck pausieren",actionPauseOff:"Pausieren und Strom abschalten",pollInterval:"Prüfintervall (Sekunden)",pollIntervalHint:"Wie oft jeder Drucker während eines laufenden Drucks geprüft wird. Minimum 5 s, Maximum 120 s.",externalUrlMissing:"Externe URL ist nicht gesetzt.",externalUrlHint:"Die ML-API ruft das Kamera-Snapshot per URL ab. Setze die externe URL in den allgemeinen Einstellungen, damit der ML-API-Container Bambuddy erreichen kann.",perPrinterTitle:"Überwachte Drucker",perPrinterHint:"Wähle, welche Drucker vom Erkennungsdienst überwacht werden.",monitorAll:"Alle verbundenen Drucker überwachen",statusTitle:"Status",serviceRunning:"Dienst läuft",thresholds:"Niedrig / Hoch-Schwellwerte",activePrinters:"Aktive Drucke",noActivePrints:"Derzeit laufen keine Drucke.",historyTitle:"Letzte Erkennungen",noHistory:"Noch keine Erkennungen."},makerworld:{title:"MakerWorld",description:"Füge eine MakerWorld-Modell-URL ein, um es direkt aus Bambuddy zu importieren und zu drucken — ohne die Bambu Handy App zu öffnen.",pasteUrlHeader:"Von MakerWorld importieren",pasteUrlPlaceholder:"https://makerworld.com/de/models/… oder beliebigen MakerWorld-Link einfügen",resolveButton:"Laden",signInRequiredTitle:"Bambu-Cloud-Anmeldung für Download erforderlich",signInRequiredBody:"Modell-Details können anonym angezeigt werden, aber MakerWorld verlangt eine Bambu-Cloud-Anmeldung zum Herunterladen der 3MF-Dateien.",openCloudSettings:"Cloud-Einstellungen öffnen",untitledModel:"Unbenanntes Modell",byCreator:"von {{name}}",downloadsCount:"{{count}} Downloads",licensePrefix:"Lizenz",alreadyImported:"Bereits in Bibliothek",openOnMakerworld:"Auf MakerWorld öffnen",alreadyInLibrary:"Dieses Modell ist bereits in deiner Bibliothek — zu finden im Dateimanager → MakerWorld",importSuccess:"{{filename}} importiert — gespeichert im Dateimanager → MakerWorld",platesHeader:"Platten ({{count}})",plateDefaultName:"Platte {{n}}",materialCount:"{{count}} Filamente",amsRequired:"AMS erforderlich",slicedFor:"Gesliced für {{printer}}",alsoCompatible:"Auch kompatibel: {{printers}}",importToLibrary:"Speichern",sliceIn:"Speichern & in {{slicer}} öffnen",disclaimer:"Die MakerWorld-Integration verwendet von der Community dokumentierte API-Endpunkte. Bambuddy ist nicht mit MakerWorld oder Bambu Lab verbunden oder von diesen unterstützt.",lastImportSuccess:"In deine Bibliothek importiert",lastImportAlreadyInLibrary:"Bereits in deiner Bibliothek",viewInLibrary:"Im Dateimanager anzeigen",openInBambuStudio:"In Bambu Studio öffnen",openInOrcaSlicer:"In OrcaSlicer öffnen",importTo:"In Dateimanager importieren",recentImportsHeader:"Zuletzt importiert",phaseResolving:"Auflösen",phaseDownloading:"Lade herunter",folderAuto:"MakerWorld (Standard)",importAll:"Alle importieren",importAllProgress:"Importiere {{current}}/{{total}}",openGallery:"Bildergalerie öffnen",galleryPrev:"Vorheriges Bild",galleryNext:"Nächstes Bild",deleteImport:"Aus Bibliothek entfernen",importDeleting:"Wird entfernt…",importDeleted:"Aus Bibliothek entfernt",confirmDelete:"{{filename}} aus der Bibliothek entfernen? Die lokale Datei wird gelöscht, die Platte kann aber erneut von MakerWorld importiert werden.",errors:{resolveFailed:"Diese MakerWorld-URL konnte nicht aufgelöst werden.",downloadFailed:"Download fehlgeschlagen. Bitte erneut versuchen.",deleteFailed:"Datei konnte nicht aus der Bibliothek entfernt werden."}},gcodeViewer:{back:"Zurück",backToArchives:"Zurück zum Druckarchiv",backToFiles:"Zurück zum Dateimanager"},libraryTrash:{title:"Papierkorb",headerButton:"Papierkorb",headerTooltip:"In den Papierkorb verschobene Dateien anzeigen",backToFiles:"Zurück zum Dateimanager",subtitleAdmin:"Gelöschte Dateien bleiben {{days}} Tage hier und werden dann automatisch entfernt. Diese Ansicht zeigt Papierkorb-Dateien aller Benutzer.",subtitleUser:"Gelöschte Dateien bleiben {{days}} Tage hier und werden dann automatisch entfernt.",loading:"Papierkorb wird geladen…",loadError:"Papierkorb konnte nicht geladen werden.",empty:"Der Papierkorb ist leer.",summary:"{{count}} Dateien · {{size}}",emptyTrash:"Papierkorb leeren",restore:"Wiederherstellen",purgeNow:"Jetzt löschen",autoPurgeIn:"Wird in {{when}} gelöscht",days:"Tage",retentionLabel:"Automatisch löschen nach",selectAll:"Alle auswählen",selectOne:"{{filename}} auswählen",selectionCount:"{{count}} ausgewählt",bulkRestore:"Auswahl wiederherstellen",bulkPurge:"Auswahl löschen",col:{filename:"Datei",folder:"Ordner",size:"Größe",deleted:"Verschoben",autoPurge:"Löschung",owner:"Besitzer",actions:"Aktionen"},confirm:{purgeTitle:"Endgültig löschen?",purgeBody:"{{filename}} wird von der Festplatte gelöscht und kann nicht wiederhergestellt werden.",emptyTitle:"Papierkorb leeren?",emptyBody:"Alle {{count}} Dateien werden endgültig von der Festplatte gelöscht.",bulkPurgeTitle:"Ausgewählte Dateien endgültig löschen?",bulkPurgeBody:"Die {{count}} ausgewählten Dateien werden von der Festplatte gelöscht und können nicht wiederhergestellt werden.",cta:"Endgültig löschen"},toast:{restored:"Datei wiederhergestellt.",restoreFailed:"Datei konnte nicht wiederhergestellt werden.",purged:"Datei endgültig gelöscht.",purgeFailed:"Datei konnte nicht gelöscht werden.",emptied:"{{count}} Datei(en) aus dem Papierkorb gelöscht.",emptyFailed:"Papierkorb konnte nicht geleert werden.",retentionSaved:"Automatisches Löschen auf {{days}} Tage gesetzt.",retentionFailed:"Einstellung konnte nicht gespeichert werden.",bulkRestored:"{{count}} Datei(en) wiederhergestellt.",bulkPurged:"{{count}} Datei(en) gelöscht."}},libraryPurge:{title:"Alte Dateien entfernen",headerButton:"Alte entfernen",headerTooltip:"Alte Dateien im Block in den Papierkorb verschieben",description:"Räume alte Dateien in einem Rutsch aus deiner Bibliothek. Dateien mit Druckverlauf werden nach dem letzten Druckdatum bewertet; nie gedruckte Dateien nach dem Upload-Datum.",ageLabel:"Dateien älter als",days:"Tage",includeNeverPrinted:"Dateien einbeziehen, die nie gedruckt wurden",effectsTitle:'Was passiert, wenn du auf „Entfernen" klickst',effect1:"Passende Dateien werden in den Papierkorb verschoben — noch nicht von der Festplatte gelöscht.",effect2:"Du kannst sie bis zum Ablauf der Aufbewahrungsfrist jederzeit wiederherstellen.",effect3:"Nach Ablauf der Frist löscht der Papierkorb-Sweeper sie endgültig von der Festplatte.",effect4:"Dateien in externen (verknüpften) Ordnern werden übersprungen — Bambuddy löscht keine Bytes, die ihm nicht gehören.",previewLoading:"Prüfe, wie viele Dateien passen…",previewFailed:"Vorschau konnte nicht geladen werden.",previewSummary:"{{count}} Dateien · {{size}} würden in den Papierkorb verschoben",andMore:"…und {{count}} weitere",warning:"Dateien im Papierkorb zählen weiterhin zum Speicher, bis die Aufbewahrungsfrist abgelaufen ist. Leere den Papierkorb danach, um sofort Speicher freizugeben.",confirmCta:"{{count}} in den Papierkorb verschieben",purging:"Wird verschoben…",toast:{success:"{{count}} Datei(en) in den Papierkorb verschoben.",failed:"Dateien konnten nicht verschoben werden."}},libraryAutoPurge:{enableLabel:"Alte Dateien automatisch entfernen",enableDescription:"Führt die Admin-Bereinigung einmal pro Tag aus. Dateien landen zuerst im Papierkorb — sie werden nicht sofort gelöscht.",ageLabel:"Dateien älter als",ageDescription:"Minimum 7 Tage, Maximum 10 Jahre. Verwendet dieselbe Altersregel wie die manuelle „Alte entfernen“-Schaltfläche.",days:"Tage",includeNeverPrinted:"Dateien einbeziehen, die nie gedruckt wurden",saveFailed:"Einstellungen konnten nicht gespeichert werden."},archivePurge:{headerButton:"Alte löschen",headerTooltip:"Alte Archive in einem Rutsch löschen",title:"Alte Archive löschen",description:"Räume alte Druckhistorie auf. Jedes Archiv wird nach seinem letzten abgeschlossenen Druck bewertet — ein erneuter Druck setzt die Frist zurück, aktive Arbeit bleibt sicher.",ageLabel:"Archive löschen, die zuletzt gedruckt wurden vor",days:"Tage",effectsTitle:'Was passiert, wenn du auf „Löschen" klickst',effect1:"Jedes passende Archiv wird aus der Listenansicht ausgeblendet und seine Dateien werden von der Festplatte entfernt (3MF, Vorschau, Timelapse, Quell-3MF, F3D, Fotos).",effect2:"Die Archivzeile bleibt in der Datenbank, damit die Quick Stats den Filament-, Zeit-, Kosten- und Energiebeitrag behalten — wie der Standard beim Einzel-Löschen.",effect3:'Aktiviere unten „Auch aus Statistiken entfernen", um zusätzlich den Quick-Stats-Beitrag zu verwerfen (entspricht dem Einzel-Löschen-Häkchen). Dieser Pfad ist unwiderruflich.',effect4:"Ein erneuter Druck setzt die Frist zurück, Archive, die du weiterhin nutzt, bleiben sicher.",purgeStatsLabel:"Auch aus Statistiken entfernen",purgeStatsHint:"Verwirft die passenden Archive aus den Quick Stats (Filament, Zeit, Kosten, Energie). Ohne diese Option behalten die Quick Stats jeden Beitrag und nur die Dateien werden gelöscht.",previewLoading:"Prüfe passende Archive…",previewFailed:"Vorschau konnte nicht erstellt werden.",previewSummary:"{{count}} Archive · {{size}} würden entfernt",andMore:"…und {{count}} weitere",warning:"Dateien werden von der Festplatte entfernt und können nicht wiederhergestellt werden. Lade wichtige Archive vorher herunter oder markiere sie als Favorit.",confirmCta:"{{count}} Archiv(e) entfernen",purging:"Entferne…",toast:{success:"{{count}} Archiv(e) entfernt.",failed:"Archive konnten nicht gelöscht werden."}},archiveAutoPurge:{enableLabel:"Alte Archive automatisch löschen",enableDescription:"Blendet einmal pro Tag Archive aus der Listenansicht aus und entfernt ihre Dateien von der Festplatte, wenn sie im angegebenen Zeitraum nicht gedruckt wurden. Ein erneuter Druck setzt die Frist zurück.",ageLabel:"Archive automatisch löschen, die zuletzt gedruckt wurden vor",ageDescription:"Minimum 7 Tage, Maximum 10 Jahre. Basiert auf dem letzten abgeschlossenen Druck — ein erneuter Druck setzt die Frist zurück. Entfernt 3MF, Vorschau, Timelapse, Quell-3MF, F3D und Fotos.",days:"Tage",purgeStatsLabel:"Auch aus Statistiken entfernen",purgeStatsDescription:"Wenn aktiviert, verwirft der tägliche Sweeper auch den Quick-Stats-Beitrag (Filament, Zeit, Kosten, Energie) jedes gelöschten Archivs. Standard aus — Quick Stats behalten den Beitrag, nur die Dateien werden gelöscht.",runNow:"Archive jetzt löschen",saveFailed:"Einstellungen konnten nicht gespeichert werden."},cameraTokens:{title:"Kamera-API-Tokens",navTitle:"Kamera-API-Tokens",description:"Langlebige Tokens zum Einbetten des Kamerastreams in Home Assistant, Frigate, Kioske oder andere Tools, die eine stabile URL benötigen. Jeder Token ist nur für den Kamerastream und kann jederzeit widerrufen werden.",loading:"Laden…",confirmRevoke:{title:"Dieses Token widerrufen?",body:'Jedes Gerät, das "{{name}}" verwendet, verliert sofort den Zugriff. Dies kann nicht rückgängig gemacht werden.',cancel:"Abbrechen",confirm:"Widerrufen"},create:{title:"Neues Token erstellen",nameLabel:"Token-Name",namePlaceholder:"z. B. Home Assistant",daysLabel:"Tage bis Ablauf",submit:"Erstellen",hint:"Maximale Lebensdauer 365 Tage. Der Token-Wert wird nur einmal bei der Erstellung angezeigt – jetzt kopieren."},created:{title:"Token erstellt – jetzt kopieren",warning:"Dies ist das einzige Mal, dass dieser Token sichtbar ist. Nach dem Schließen dieses Dialogs können Sie ihn nie wieder anzeigen.",copy:"Kopieren",dismiss:"Ich habe es gespeichert"},list:{myTitle:"Meine Tokens",allTitle:"Alle Benutzer (Admin-Ansicht)",empty:"Noch keine Tokens.",name:"Name",owner:"Eigentümer",prefix:"Präfix",created:"Erstellt",expires:"Läuft ab",lastUsed:"Zuletzt verwendet",revoke:"Widerrufen",expired:"Abgelaufen"},toast:{created:"Token erstellt",createFailed:"Token konnte nicht erstellt werden",revoked:"Token widerrufen",revokeFailed:"Token konnte nicht widerrufen werden",loadFailed:"Tokens konnten nicht geladen werden",copied:"In Zwischenablage kopiert",copyFailed:"Kopieren fehlgeschlagen – manuell auswählen und kopieren"}},forecast:{title:"Bestandsprognose",noSpools:"Keine aktiven Spulen gefunden. Fügen Sie Spulen zu Ihrem Inventar hinzu, um Prognosedaten zu sehen.",noUsageData:"Keine Verbrauchsdaten verfügbar — die Bestandszeitlinie kann nicht projiziert werden.",sku:"SKU",material:"Material",stock:"Bestand",dailyRate:"Rate",daysLeft:"Verbleibende Tage",emptyBy:"Aufgebraucht am",reorderBy:"Nachbestellen bis",actions:"Aktionen",trend:"Trend",estimated:"Gesch.",noData:"Keine Daten",timeframe:"Zeitraum",chartTitle:"Bestandsprognose — Top 5 Materialien",dashedLinesROP:"Gestrichelte Linien = Nachbestellpunkte",stockLevel:"Bestandsniveau",reorderPoint:"Nachbestellpunkt",safetyMargin:"Sicherheitspuffer",trendLegend:"Trend (verlaufsbasiert, 95 % Serviceniveau)",estimatedLegend:"Geschätzt (Gewichtsdelta)",noDataLegend:"Keine Daten",ropLabel:"NBP",ssLabel:"SB",safetyStockLegend:"Sicherheitsbestand",stockArrivalLegend:"Wareneingang",stockoutLegend:"Fehlbestand",alertCount_one:"{{count}} Warnung",alertCount_other:"{{count}} Warnungen",order:"Bestellen",globalLeadTime:"Globale Lieferzeit",globalLeadTimeHint:"Globale Lieferzeitvorgabe — wird in der Nachbestellpunktberechnung für alle SKUs verwendet",save:"Speichern",cancel:"Abbrechen",settingsSaved:"Einstellungen gespeichert",failedSaveSettings:"Einstellungen konnten nicht gespeichert werden",globalLeadTimeSaved:"Globale Lieferzeit gespeichert",skuLeadTimeOverride:"SKU-Lieferzeitüberschreibung",skuLeadTimeHint:"0 = globale Lieferzeit verwenden. Größer 0 setzen, um für diesen SKU zu überschreiben.",safetyMarginLabel:"Sicherheitspuffer",effectiveLeadTime:"Effektive Lieferzeit",effectiveLeadTimeHint:"max(global {{global}}T, SKU {{sku}}T)",reorderPointHint:"d̄ × LT + safety margin — bei diesem Bestand bestellen",safetyMarginHint:"Statistischer Sicherheitsbestand (z=1,65 × σ × √LT) + benutzerdefinierter Puffer",safetyMarginHintDays:"Zusätzlicher Puffer auf den statistischen Sicherheitsbestand.{{approx}}",safetyMarginHintDaysApprox:" ≈ {{g}}g beim aktuellen Verbrauch.",safetyMarginHintG:"Fester Gewichtspuffer auf den statistischen Sicherheitsbestand.{{approx}}",safetyMarginHintGApprox:" ≈ {{days}}d beim aktuellen Verbrauch.",individualSpools:"Einzelne Spulen",labelWeight:"Etikett",spoolCount_one:"{{count}} Spule",spoolCount_other:"{{count}} Spulen",stockBreakRisk:"Bestandsunterbrechungsrisiko",stockBreakBefore:"Bestandsunterbrechung vor Auffüllung",stockBreakDetail:"{{days}}d verbleibend, Lieferzeit {{lt}}d.",reorderNow:"Jetzt nachbestellen",reorderTriggerPassed:"Auslösedatum {{date}} ist überschritten.",shoppingList:"Einkaufsliste",shoppingListItems_one:"({{count}} Artikel)",shoppingListItems_other:"({{count}} Artikel)",shoppingListEmpty:"Einkaufsliste ist leer. Klicken Sie auf das Warenkorbsymbol in einer Zeile, um Artikel hinzuzufügen.",addToCart:"Zur Einkaufsliste hinzufügen",alertsSnoozed:"Benachrichtigungen für diese SKU stummschalten",alertsEnabled:"Benachrichtigungen für diese SKU aktivieren",addedToCart:"Zur Einkaufsliste hinzugefügt",failedAddItem:"Artikel konnte nicht hinzugefügt werden",listView:"Liste",logisticsView:"Logistik",qty:"Menge",weight:"Gewicht",leadTime:"Lieferzeit",expectedRestock:"Erwartete Auffüllung",status:"Status",note:"Notiz",pending:"Ausstehend",purchased:"Bestellt",received:"Erhalten",markPurchased:"Als bestellt markieren",markReceived:"Als erhalten markieren — fügt Spulen dem Lagerbestand hinzu",resetToPending:"Auf ausstehend zurücksetzen",remove:"Entfernen",clearAll:"Alle löschen",downloadCsv:"CSV",addToCartTitle:"Zur Einkaufsliste hinzufügen",byQuantity:"Nach Menge",byDuration:"Nach Dauer",numberOfSpools:"Anzahl der Spulen",lastHowManyDays:"Wie viele Tage soll es reichen?",noUsageQty:"Keine Verbrauchsdaten — Menge auf 1 gesetzt.",noteOptional:"Notiz (optional)",notePlaceholder:"z. B. für Projekt X, dringend…",addNSpools_one:"{{count}} Spule hinzufügen",addNSpools_other:"{{count}} Spulen hinzufügen",onArrival:"Bei Ankunft",stockBreakIn:"Bestandsunterbrechung in {{days}}d.",stockRunsOutBefore:"Bestand läuft vor Ablauf der {{lt}}d Lieferzeit aus.",atRate:"Bei {{rate}}g/Tag benötigen Sie",moreSpools_one:"{{count}} weitere Spule",moreSpools_other:"{{count}} weitere Spulen",bridgeGap:"um die Lücke zu überbrücken.",noReadAccess:"Sie haben keine Berechtigung, Bestandsprognosen anzuzeigen.",noWriteAccess:"Sie haben keine Berechtigung, Prognoseeinstellungen zu ändern."}},vpe={nav:{printers:"Impresoras",archives:"Archivos",queue:"Cola de impresión",stats:"Estadísticas",profiles:"Perfiles",maintenance:"Mantenimiento",projects:"Proyectos",inventory:"Filamento",files:"Gestor de archivos",makerworld:"MakerWorld",notifications:"Notificaciones",settings:"Ajustes",system:"Sistema",collapseSidebar:"Contraer barra lateral",expandSidebar:"Expandir barra lateral",update:"Actualizar",updateAvailable:"Actualización disponible: v{{version}}",updateAvailableBanner:"¡La versión {{version}} está disponible!",viewUpdate:"Ver actualización",viewOnGithub:"Ver en GitHub",keyboardShortcuts:"Atajos de teclado (?)",switchToLight:"Cambiar a modo claro",switchToDark:"Cambiar a modo oscuro",switchToSystem:"Cambiar a modo del sistema",smartSwitches:"Interruptores inteligentes",logout:"Cerrar sesión",installApp:"Instalar app",installAppSuccess:"Bambuddy se ha instalado"},common:{save:"Guardar",saving:"Guardando...",cancel:"Cancelar",delete:"Eliminar",edit:"Editar",add:"Añadir",close:"Cerrar",confirm:"Confirmar",loading:"Cargando...",error:"Error",errorLoading:"Error al cargar los datos",retry:"Reintentar",success:"Éxito",warning:"Advertencia",enabled:"Activado",disabled:"Desactivado",yes:"Sí",no:"No",on:"Encendido",off:"Apagado",all:"Todos",none:"Ninguno",search:"Buscar",filter:"Filtrar",sort:"Ordenar",refresh:"Actualizar",download:"Descargar",upload:"Subir",uploading:"Subiendo...",uploadFailed:"Error al subir",actions:"Acciones",status:"Estado",name:"Nombre",description:"Descripción",date:"Fecha",time:"Hora",hours:"horas",minutes:"minutos",seconds:"segundos",days:"días",enable:"Activar",disable:"Desactivar",permissions:"Permisos",noPrinters:"No hay impresoras configuradas",noData:"No hay datos disponibles",linkNotFound:"Enlace no encontrado",required:"Obligatorio",optional:"Opcional",dismiss:"Descartar",apply:"Aplicar",reset:"Restablecer",export:"Exportar",import:"Importar",clear:"Borrar",selectAll:"Seleccionar todo",deselectAll:"Deseleccionar todo",noChange:"— Sin cambios —",unchanged:"Sin cambios",unassigned:"Sin asignar",unknown:"Desconocido",unknownError:"Error desconocido",today:"Hoy",tomorrow:"Mañana",asap:"Lo antes posible",overdue:"Atrasado",now:"Ahora",collapse:"Contraer",expand:"Expandir",viewArchive:"Ver archivo",viewInFileManager:"Ver en el gestor de archivos",addedBy:"Añadido por {{username}}",prints:"impresiones",more:"+{{count}} más",ascending:"Ascendente",descending:"Descendente",back:"Atrás",copy:"Copiar",copied:"¡Copiado!",printer:"Impresora",remove:"Quitar",type:"Tipo",print:"Imprimir",rename:"Renombrar",move:"Mover",create:"Crear",duplicate:"Duplicar",left:"Izquierda",right:"Derecha"},printers:{addPreflight:{checking:"Comprobando la conexión...",warning:"Algunas comprobaciones de conexión fallaron. Esta impresora podría aparecer como desconectada. Revisa las comprobaciones de abajo, soluciona lo que puedas o guárdala de todos modos.",back:"Atrás",saveAnyway:"Guardar de todos modos"},title:"Impresoras",addPrinter:"Añadir impresora",editPrinter:"Editar impresora",deletePrinter:"Eliminar impresora",printerName:"Nombre de la impresora",serialNumber:"Número de serie",ipAddress:"Dirección IP / Nombre de host",accessCode:"Código de acceso",model:"Modelo",nozzleCount:"Número de boquillas",autoArchive:"Archivado automático",status:{available:"Disponible",idle:"Inactiva",printing:"Imprimiendo",paused:"En pausa",offline:"Desconectada",problem:"Problema",error:"Error",finished:"Finalizada",unknown:"Desconocido"},temperatures:{nozzle:"Boquilla",bed:"Cama",chamber:"Cámara"},progress:"{{percent}}% completado",timeRemaining:"{{time}} restante",deleteConfirm:'¿Está seguro de que desea eliminar "{{name}}"?',maintenanceOk:"Mantenimiento correcto",maintenanceWarning:"{{count}} advertencia",maintenanceWarning_plural:"{{count}} advertencias",maintenanceDue:"{{count}} pendiente",maintenanceDue_plural:"{{count}} pendientes",sort:{name:"Nombre",status:"Estado",model:"Modelo",location:"Ubicación",ascending:"Orden ascendente",descending:"Orden descendente"},cardSize:{small:"Tarjetas pequeñas",medium:"Tarjetas medianas",large:"Tarjetas grandes",extraLarge:"Tarjetas extragrandes"},hideOffline:"Ocultar desconectadas",nextAvailable:"Próxima disponible",powerOn:"Encender",offlinePrintersWithPlugs:"Impresoras desconectadas con enchufes inteligentes",noPrintersConfigured:"Aún no hay impresoras configuradas",search:"Buscar impresoras...",noSearchResults:"Ninguna impresora coincide con su búsqueda o filtros",filter:{allStatuses:"Todos los estados",allLocations:"Todas las ubicaciones"},toolbar:{filters:"Filtros",view:"Vista",actions:"Acciones"},readyToPrint:"Lista para imprimir",external:"Externo",extL:"Ext-L",extR:"Ext-R",deleteArchives:"Eliminar archivos de impresión",noLabel:"Sin etiqueta",printPreview:"Vista previa de impresión",width:"Anchura",height:"Altura",noObjectsFound:"No se encontraron objetos",objectsLoadedOnPrintStart:"Los objetos se cargan al iniciar una impresión",willBeSkipped:"Se omitirá",name:"Nombre",serialCannotBeChanged:"El número de serie no se puede cambiar",locationHelp:"Se usa para agrupar impresoras y filtrar trabajos en cola",wifiSignal:{veryWeak:"Muy débil",weak:"Débil",fair:"Aceptable",good:"Buena",excellent:"Excelente"},maintenanceUpToDate:"Todo el mantenimiento al día - Haga clic para ver",chamberLightOn:"Encender luz de la cámara",chamberLightOff:"Apagar luz de la cámara",files:"Archivos",browseFiles:"Explorar archivos de la impresora",autoOffAfterPrint:"Apagado automático tras la impresión",autoOffExecuted:"Se ejecutó el apagado automático - encienda la impresora para restablecer",hmsErrors:"Errores HMS",viewHmsErrors:"Ver {{count}} error(es) HMS",resume:"Reanudar",pause:"Pausar",stop:"Detener",camera:"Cámara",skipObject:"Omitir objeto",reconnect:"Reconectar",forceRefresh:"Forzar actualización",forceRefreshSuccess:"Actualización solicitada",mqttDebug:"Depuración MQTT",printerInformation:"Información de la impresora",copyToClipboard:"Copiar",copied:"¡Copiado!",state:"Estado",wifiSignalLabel:"Señal Wi-Fi",developerMode:"Modo desarrollador",enabled:"Activado",disabled:"Desactivado",addedOn:"Añadida",sdCard:"Tarjeta SD",inserted:"Insertada",notInserted:"No insertada",totalPrintHours:"Horas de impresión",activeNozzle:"Activa: boquilla {{nozzle}}",nozzleRack:"Soporte de boquillas",nozzleDocked:"Acoplada",nozzleMounted:"Montada",nozzleActive:"Activa",nozzleIdle:"Inactiva",nozzleDiameter:"Diámetro",nozzleType:"Tipo",nozzleStatus:"Estado",nozzleFilament:"Filamento",nozzleWear:"Desgaste",nozzleMaxTemp:"Temp. máx.",nozzleSerial:"Serie",nozzleHardenedSteel:"Acero endurecido",nozzleStainlessSteel:"Acero inoxidable",nozzleTungstenCarbide:"Carburo de tungsteno",nozzleFlow:"Flujo",nozzleHighFlow:"Flujo alto",nozzleStandardFlow:"Estándar",firmwareUpdate:"Actualización de firmware",firmwareInstructions:"En la pantalla táctil de la impresora, vaya a",firmwareNav:"Navegue hasta",settings:"Ajustes",firmware:"Firmware",discoverPrinters:"Detectar impresoras",searching:"Buscando...",manualEntry:"Entrada manual",addFromCloud:"Añadir desde la nube",toast:{printerDeleted:"Impresora eliminada",missingSpoolAssignment:"Impresión iniciada en {{printer}}. Falta la asignación de bobina para: {{slots}}",printerAdded:"Impresora añadida",printerUpdated:"Impresora actualizada",failedToDelete:"Error al eliminar la impresora",failedToAdd:"Error al añadir la impresora",connectionFailedNotAdded:"No se pudo conectar con la impresora. Verifique la IP, el número de serie y el código de acceso, y confirme que el modo solo LAN está activado. La impresora no se añadió.",failedToUpdate:"Error al actualizar la impresora",commandSent:"Comando enviado",failedToSendCommand:"Error al enviar el comando",turnedOn:"{{name}} encendida",failedToPowerOn:"Error al encender {{name}}",scriptTriggered:"Script ejecutado",printStopped:"Impresión detenida",printPaused:"Impresión en pausa",printResumed:"Impresión reanudada",referenceDeleted:"Referencia eliminada",detectionAreaSaved:"Área de detección guardada",failedToRunScript:"Error al ejecutar el script",failedToStopPrint:"Error al detener la impresión",failedToPausePrint:"Error al pausar la impresión",failedToResumePrint:"Error al reanudar la impresión",failedToControlChamberLight:"Error al controlar la luz de la cámara",failedToSetSpeed:"Error al establecer la velocidad de impresión",failedToUpdateSetting:"Error al actualizar el ajuste",failedToSkipObjects:"Error al omitir objetos",failedToRereadRfid:"Error al releer el RFID",failedToCheckPlate:"Error al comprobar la cama",failedToUpdateLabel:"Error al actualizar la etiqueta",failedToDeleteReference:"Error al eliminar la referencia",failedToSaveDetectionArea:"Error al guardar el área de detección",plateCheckEnabled:"Comprobación de cama activada",plateCheckDisabled:"Comprobación de cama desactivada",calibrationSaved:"¡Calibración guardada!",calibrationFailed:"Error en la calibración",rfidRereadInitiated:"Relectura de RFID iniciada",loadInitiated:"Cargando filamento…",unloadInitiated:"Descargando filamento…",failedToLoad:"Error al cargar el filamento",failedToUnload:"Error al descargar el filamento"},connection:{connected:"Conectada",offline:"Desconectada"},plateStatus:{markCleared:"Marcar cama como despejada",cleared:"Cama despejada",notCleared:"Cama no despejada",inUse:"Cama en uso"},queue:{inQueue:"{{count}} impresión en cola",inQueue_plural:"{{count}} impresiones en cola"},controls:"Controles",rfid:{reread:"Releer RFID"},ams:{load:"Cargar",unload:"Descargar"},bedJog:{title:"Mover la cama de impresión",bed:"Cama",step:"Paso (mm)",up:"Subir la cama",down:"Bajar la cama",disabledWhilePrinting:"Desactivado durante la impresión",notHomedTitle:"La impresora no está en posición de origen",notHomedMessage:"La impresora no se ha llevado a su posición de origen desde la última impresión. Ejecute el autoorigen primero para un posicionamiento seguro (estaciona el cabezal y luego lleva X, Y y Z al origen), o mueva de todos modos — los finales de carrera por software se omitirán.",homeZ:"Autoorigen",moveAnyway:"Mover de todos modos",homingStarted:"Llevando la impresora al origen…"},permission:{noAdd:"No tiene permiso para añadir impresoras",noEdit:"No tiene permiso para editar impresoras",noDelete:"No tiene permiso para eliminar impresoras",noControl:"No tiene permiso para controlar impresoras",noFiles:"No tiene permiso para acceder a los archivos de la impresora",noAmsRfid:"No tiene permiso para releer el RFID del AMS",noSmartPlugControl:"No tiene permiso para controlar enchufes inteligentes",noCamera:"No tiene permiso para ver las cámaras"},modal:{addTitle:"Añadir impresora",editTitle:"Editar impresora",myPrinter:"Mi impresora",selectModel:"Seleccionar modelo...",locationGroup:"Ubicación / Grupo (opcional)",locationPlaceholder:"p. ej., Taller, Oficina, Sótano",autoArchiveLabel:"Archivar automáticamente las impresiones completadas",fromPrinterSettings:"Desde los ajustes de la impresora",modelOptional:"Modelo (opcional)",saveChanges:"Guardar cambios"},skipObjects:{tooltip:"Omitir objetos",onlyWhilePrinting:"Omitir objetos (solo durante la impresión)",requiresMultiple:"Omitir objetos (requiere 2 o más objetos)",title:"Omitir objetos",matchIdsInfo:"Haga coincidir los ID con la pantalla de su impresora",printerShowsIds:"La pantalla de la impresora muestra los ID de los objetos en la cama de impresión",skipSelected:"Omitir seleccionados",skipping:"Omitiendo...",noObjectsSelected:"No hay objetos seleccionados",selectObjectsToSkip:"Seleccione los objetos que desea omitir de la impresión actual",skipped:"omitidos",objectsSkipped:"Objetos omitidos",activeCount:"{{count}} activos",waitForLayer:"Espere a la capa 2 o superior para omitir objetos (capa actual {{layer}})",skip:"Omitir",confirmTitle:"¿Omitir objeto?",confirmMessage:'¿Está seguro de que desea omitir "{{name}}"? Esto no se puede deshacer.'},confirm:{deleteTitle:"Eliminar impresora",deleteMessage:'¿Está seguro de que desea eliminar "{{name}}"? Esto eliminará todos los ajustes de conexión.',deleteArchivesNote:"Todo el historial de impresión de esta impresora se eliminará permanentemente.",keepArchivesNote:"El historial de impresión se conservará pero ya no estará asociado a esta impresora.",stopTitle:"Detener impresión",stopMessage:'¿Está seguro de que desea detener la impresión actual en "{{name}}"? Esto cancelará el trabajo de impresión.',stopButton:"Detener impresión",pauseTitle:"Pausar impresión",pauseMessage:'¿Está seguro de que desea pausar la impresión actual en "{{name}}"?',pauseButton:"Pausar impresión",resumeTitle:"Reanudar impresión",resumeMessage:'¿Está seguro de que desea reanudar la impresión en "{{name}}"?',resumeButton:"Reanudar impresión",powerOnTitle:"Encender impresora",powerOnMessage:'¿Está seguro de que desea ENCENDER "{{name}}"?',powerOnButton:"Encender",powerOffTitle:"Apagar impresora",powerOffMessage:'¿Está seguro de que desea APAGAR "{{name}}"?',powerOffWarning:'ADVERTENCIA: ¡"{{name}}" está imprimiendo actualmente! ¿Está seguro de que desea APAGARLA? Esto interrumpirá la impresión y podría dañar la impresora.',powerOffButton:"Apagar",haToggleTitle:'Conmutar "{{name}}"',haToggleMessage:"¿Conmutar la entidad de Home Assistant {{entity}}? Esto puede apagarla si está encendida actualmente.",haToggleWarning:'ADVERTENCIA: ¡"{{name}}" está imprimiendo actualmente! Conmutar {{entity}} puede cortar la corriente e interrumpir la impresión. ¿Continuar?',haToggleButton:"Conmutar"},bulk:{select:"Seleccionar",selectAll:"Seleccionar todo",selectByLocation:"Seleccionar por ubicación",selected:"{{count}} seleccionadas",actions:{stop:"Detener",pause:"Pausar",resume:"Reanudar",clearPlate:"Despejar cama",clearHMS:"Borrar notificaciones"},confirm:{stopTitle:"Detener {{count}} impresiones",stopMessage:"Esto cancelará las impresiones activas en {{count}} impresora(s). Esta acción no se puede deshacer.",stopButton:"Detener todo",pauseTitle:"Pausar {{count}} impresiones",pauseMessage:"Esto pausará las impresiones activas en {{count}} impresora(s).",pauseButton:"Pausar todo",clearPlateTitle:"Despejar {{count}} camas de impresión",clearPlateMessage:"Esto despejará la cama de impresión en {{count}} impresora(s) y puede activar trabajos en cola.",clearPlateButton:"Despejar todo"},success:"{{action}} completado en {{count}} impresora(s)",partial:"{{succeeded}} con éxito, {{failed}} con error",noneApplicable:"Ninguna de las impresoras seleccionadas está en el estado adecuado para esta acción",selectByState:"Seleccionar por estado"},discovery:{title:"Detectar impresoras",searching:"Buscando...",scanning:"Escaneando...",scanProgress:"Escaneando... {{scanned}}/{{total}}",foundPrinters:"Se encontraron {{count}} impresora(s)",noPrintersFound:"No se encontraron impresoras",noPrintersFoundSubnet:"No se encontraron impresoras en la subred especificada.",noPrintersFoundNetwork:"No se encontraron impresoras en la red.",allConfigured:"Todas las impresoras detectadas ya están configuradas.",alreadyAdded:"Ya añadida",select:"Seleccionar",manualEntry:"Entrada manual",addFromCloud:"Añadir desde la nube",subnetToScan:"Subred a escanear",dockerNote:"Docker detectado. Introduzca la subred de su impresora en notación CIDR. Requiere network_mode: host en docker-compose.yml.",scanSubnet:"Escanear subred en busca de impresoras",discoverNetwork:"Detectar impresoras en la red",scanningSubnet:"Escaneando la subred en busca de impresoras Bambu...",scanningNetwork:"Escaneando la red...",serialRequired:"Número de serie obligatorio",unknown:"Desconocido",failedToStart:"Error al iniciar la detección",customSubnetOption:"Subred personalizada...",customSubnetLabel:"Subred personalizada (CIDR)",customSubnetNote:"Usa una subred personalizada si tu impresora está en una red distinta a la de este servidor. Los puertos FTP (990) y MQTT (8883) deben ser accesibles a través del límite de enrutamiento."},drying:{start:"Iniciar secado",stop:"Detener secado",temperature:"Temperatura",duration:"Duración",hours:"horas",timeRemaining:"{{time}} restante",active:"Secando",notSupported:"Secado no compatible",powerRequired:"Conecte el adaptador de corriente del AMS para activar el secado",startingDrying:"Iniciando el secado...",stoppingDrying:"Deteniendo el secado...",rotateTray:"Girar la bobina durante el secado"},filaments:"Filamentos",openCameraOverlay:"Abrir la cámara superpuesta",openCameraWindow:"Abrir la cámara en una ventana nueva",firmwareUpdateAvailable:"Actualización de firmware disponible: {{current}} → {{latest}}",firmwareUpToDate:"Firmware {{version}} — Actualizado",firmwareUpdateButton:"Actualizar",plateDetection:{noPermission:"No tiene permiso para actualizar impresoras",enabledClick:"Comprobación de cama activada - Haga clic para desactivar",disabledClick:"Comprobación de cama desactivada - Haga clic para activar",manageCalibration:"Gestionar la calibración de detección de cama",calibrationRequired:"Calibración necesaria",calibrationInstructions:"Asegúrese de que la cama de impresión esté <strong>completamente vacía</strong> y luego haga clic en Calibrar.",calibrationDescription:"La calibración captura una imagen de referencia de la cama vacía. Las comprobaciones futuras se compararán con esta referencia para detectar objetos.",calibrationTip:"<strong>Consejo:</strong> puede almacenar hasta 5 calibraciones para distintas camas. El sistema usa automáticamente la mejor coincidencia al comprobar.",plateEmpty:"La cama parece estar vacía",objectsDetected:"Objetos detectados en la cama",confidence:"Confianza",difference:"Diferencia",analysisPreview:"Vista previa del análisis:",analysisLegend:"Recuadro verde = área de detección, Superposición roja = diferencias respecto a la calibración",savedReferences:"Referencias guardadas ({{count}}/{{max}})",deleteReference:"Eliminar referencia",labelPlaceholder:"Etiqueta...",clickToEdit:"{{label}} - Haga clic para editar",clickToAddLabel:"Haga clic para añadir una etiqueta"},speed:{title:"Velocidad de impresión",silent:"Silencioso (50%)",standard:"Estándar (100%)",sport:"Sport (124%)",ludicrous:"Ludicrous (166%)"},airduct:{title:"Modo de conducto de aire",cooling:"Refrigeración",heating:"Calentamiento"},noSdCard:"Sin SD",door:{open:"Abierta",closed:"Cerrada"},fans:{partCooling:"Ventilador de refrigeración de piezas",auxiliary:"Ventilador auxiliar",chamber:"Ventilador de la cámara"},clickToViewHmsErrors:"Haga clic para ver los errores HMS",estimatedCompletion:"Hora estimada de finalización",plateNumber:"Cama {{number}}",slotOptions:"Opciones de la ranura",amsPopup:{friendlyName:"Nombre del AMS",friendlyNamePlaceholder:"p. ej. Nombre descriptivo del AMS",serialNumber:"Número de serie",firmwareVersion:"Firmware",save:"Guardar",clear:"Borrar",noEditPermission:"No tiene permiso para renombrar unidades AMS"},firmwareModal:{title:"Actualización de firmware",titleUpToDate:"Información del firmware",currentVersion:"Actual:",latestVersion:"Más reciente:",releaseNotes:"Notas de la versión",checkingPrereqs:"Comprobando los requisitos previos...",sdCardReady:"Tarjeta SD lista. Haga clic abajo para subir el firmware.",uploadedSuccess:"¡Firmware subido a la tarjeta SD!",applyInstructions:"Para aplicar la actualización en su impresora:",step1:"En la pantalla táctil de la impresora, vaya a <strong>Ajustes</strong>",step2:"Navegue hasta <strong>Firmware</strong>",step3:"Seleccione <strong>Actualizar desde tarjeta SD</strong>",step4:"La actualización tardará entre 10 y 20 minutos",done:"Hecho",starting:"Iniciando...",uploadFirmware:"Subir firmware",uploadFailed:"Error al iniciar la subida: {{error}}",uploadedToast:"¡Firmware subido! Inicie la actualización desde la pantalla de la impresora.",availableVersions:"Versiones disponibles",usable:"Utilizable",unavailable:"No disponible",installed:"Instalada",newerBadge:"más reciente",olderBadge:"más antigua",currentBadge:"actual"},accessCodePlaceholder:"Dejar vacío para conservar el actual",roi:{title:"Área de detección (ROI)",xStart:"Inicio X",yStart:"Inicio Y",width:"Anchura",height:"Altura",instruction:"Ajuste el área de detección para centrarse en la cama de impresión. El recuadro verde de la vista previa muestra el área actual."},developerModeWarning:"El modo desarrollador LAN no está activado en: {{names}}. Es posible que algunas funciones no funcionen.",howToEnable:"Cómo activarlo",incompatibleFile:"Este archivo se laminó para {{slicedFor}}, pero esta impresora es una {{printerModel}}",dropNotPrintable:"Solo se pueden imprimir archivos .gcode y .gcode.3mf",dropToPrint:"Suelte para imprimir",cannotPrint:"Impresora ocupada"},archives:{title:"Archivos de impresión",searchPlaceholder:"Buscar archivos...",filterByPrinter:"Filtrar por impresora",filterByStatus:"Filtrar por estado",sortBy:"Ordenar por",sortNewest:"Más recientes primero",sortOldest:"Más antiguos primero",sortName:"Nombre",sortDuration:"Duración",sortLargest:"Mayores primero",sortSmallest:"Menores primero",sortSize:"Tamaño",noArchives:"No se encontraron archivos",noArchivesSearch:"Ningún archivo coincide con su búsqueda",originalPrintNotVisible:"La impresión original no está visible - pruebe a borrar los filtros",noArchivesYet:"Aún no hay archivos",prints:"impresiones",pagination:{showing:"Mostrando",to:"a",of:"de",show:"Mostrar",page:"Página",all:"Todos"},loadingArchives:"Cargando archivos...",releaseToUpload:"Suelte para subir",showAll:"Mostrar todos",showFavoritesOnly:"Mostrar solo favoritos",gridView:"Vista de cuadrícula",listView:"Vista de lista",calendarView:"Vista de calendario",logView:"Registro de impresión",manageTags:"Gestionar etiquetas",showFailedPrints:"Mostrar impresiones fallidas",hideFailedPrints:"Ocultar impresiones fallidas",hideDuplicates:"Ocultar duplicados",viewOriginalPrint:"Haga clic para ver la impresión original (n.º {{id}})",printTime:"Tiempo de impresión",filamentUsed:"Filamento usado",cost:"Coste",reprint:"Reimprimir",preview:"Vista previa",deleteArchive:"Eliminar archivo",deleteConfirm:"¿Está seguro de que desea eliminar este archivo?",favorite:"Favorito",unfavorite:"Quitar de favoritos",viewDetails:"Ver detalles",status:{completed:"Completada",failed:"Fallida",stopped:"Detenida"},toast:{source3mfAttached:"3MF de origen adjuntado: {{filename}}",failedUploadSource3mf:"Error al subir el 3MF de origen",source3mfRemoved:"3MF de origen eliminado",failedRemoveSource3mf:"Error al eliminar el 3MF de origen",f3dAttached:"F3D adjuntado: {{filename}}",failedUploadF3d:"Error al subir el F3D",f3dRemoved:"F3D eliminado",failedRemoveF3d:"Error al eliminar el F3D",timelapseAttached:"Time-lapse adjuntado: {{filename}}",timelapseAlreadyAttached:"El time-lapse ya está adjuntado",noMatchingTimelapse:"No se encontró ningún time-lapse coincidente",failedScanTimelapse:"Error al buscar el time-lapse",failedAttachTimelapse:"Error al adjuntar el time-lapse",timelapseRemoved:"Time-lapse eliminado",failedRemoveTimelapse:"Error al eliminar el time-lapse",timelapseUploaded:"Time-lapse subido: {{filename}}",failedUploadTimelapse:"Error al subir el time-lapse",archiveDeleted:"Archivo eliminado",failedDeleteArchive:"Error al eliminar el archivo",addedToFavorites:"Añadido a favoritos",removedFromFavorites:"Quitado de favoritos",projectUpdated:"Proyecto actualizado",failedUpdateProject:"Error al actualizar el proyecto",linkCopied:"Enlace copiado al portapapeles",failedCopyLink:"Error al copiar el enlace",photoDeleted:"Foto eliminada",failedDeletePhoto:"Error al eliminar la foto",failedDeleteArchives:"Error al eliminar los archivos",failedUpdateFavorites:"Error al actualizar los favoritos",exportDownloaded:"Exportación descargada",exportFailed:"Error en la exportación"},menu:{print:"Imprimir",schedule:"Programar",openInBambuStudio:"Abrir en el laminador",slice:"Laminar",externalLink:"Enlace externo",viewOnMakerWorld:"Ver en MakerWorld",preview3d:"Vista previa 3D",viewTimelapse:"Ver time-lapse",scanForTimelapse:"Buscar time-lapse",uploadTimelapse:"Subir time-lapse",removeTimelapse:"Eliminar time-lapse",downloadSource3mf:"Descargar 3MF de origen",uploadSource3mf:"Subir 3MF de origen",replaceSource3mf:"Reemplazar 3MF de origen",removeSource3mf:"Eliminar 3MF de origen",uploadF3d:"Subir F3D",replaceF3d:"Reemplazar F3D",downloadF3d:"Descargar F3D",removeF3d:"Eliminar F3D",download:"Descargar",copyDownloadLink:"Copiar enlace de descarga",qrCode:"Código QR",viewPhotos:"Ver fotos",viewPhotosCount:"Ver fotos ({{count}})",projectPage:"Página del proyecto",addToFavorites:"Añadir a favoritos",removeFromFavorites:"Quitar de favoritos",edit:"Editar",printLog:"Registro de impresión",goToProject:"Ir al proyecto: {{name}}",addToProject:"Añadir al proyecto",removeFromProject:"Quitar del proyecto",loading:"Cargando...",noProjectsAvailable:"No hay proyectos disponibles",searchProjects:"Buscar proyectos…",select:"Seleccionar",deselect:"Deseleccionar",delete:"Eliminar"},permission:{noReprint:"No tiene permiso para reimprimir este archivo",noAddToQueue:"No tiene permiso para añadir a la cola",noUpdateArchives:"No tiene permiso para actualizar archivos",noUploadFiles:"No tiene permiso para subir archivos",noDownload:"No tiene permiso para descargar archivos",noCopyLink:"No tiene permiso para copiar enlaces de descarga",noDelete:"No tiene permiso para eliminar este archivo",noCreate:"No tiene permiso para crear archivos"},platePicker:{title:"Seleccione la cama para la vista previa",hint:"Este archivo tiene varias camas. Elija una para abrirla en el visor de G-code.",plateLabel:"Cama {{index}}",objectCount:"{{count}} objeto",objectCount_plural:"{{count}} objetos",noGcode:"Este archivo no tiene G-code laminado para previsualizar. Ábralo en Bambu Studio para laminarlo primero."},card:{previousPlate:"Cama anterior",nextPlate:"Cama siguiente",plateNumber:"Cama {{index}}",moreOptions:"Haga clic con el botón derecho para más opciones",addToFavorites:"Añadir a favoritos",removeFromFavorites:"Quitar de favoritos",cancelled:"cancelada",failed:"fallida",duplicate:"duplicado",duplicateTitle:"Este modelo ya se ha impreso anteriormente",openSource3mf:"Abrir el 3MF de origen en Bambu Studio (clic derecho para más opciones)",downloadF3d:"Descargar el archivo de diseño de Fusion 360",viewTimelapse:"Ver time-lapse",viewPhoto:"Ver 1 foto",viewPhotos:"Ver {{count}} fotos",openFolder:"Abrir carpeta: {{name}}",slicedFile:"Archivo laminado - listo para imprimir",sourceFile:"Solo archivo de origen - no hay mapeo de AMS disponible",gcode:"GCODE",source:"ORIGEN",project:"Proyecto: {{name}}",runsBadge:"{{count}} impresiones",runsBadgeTitle:"{{count}} impresiones en total — {{successful}} con éxito, {{failed}} fallidas. Haga clic para ver el registro completo de impresión.",estimated:"Estimado: {{time}}",actual:"Real: {{time}}",accuracy:"Precisión: {{percent}}%",filament:"{{weight}} g",layer:"{{count}} capa",layers:"{{count}} capas",object:"{{count}} objeto",objects:"{{count}} objetos",slicedFor:"Laminado para {{model}}",uploadedBy:"Subido por",noPermissionReprint:"No tiene permiso para reimprimir",noFileForReprint:"No hay archivo 3MF disponible — no se pudo descargar el archivo de la impresora cuando se registró la impresión",noPermissionEdit:"No tiene permiso para editar archivos",noPermissionDelete:"No tiene permiso para eliminar archivos",reprint:"Reimprimir",schedulePrint:"Programar impresión",schedule:"Programar",openInBambuStudio:"Abrir en el laminador",openInBambuStudioToSlice:"Abrir en el laminador para laminar",slice:"Laminar",externalLink:"Enlace externo",makerWorld:"MakerWorld: {{designer}}",viewProject:"Ver proyecto",noExternalLink:"Sin enlace externo",preview3d:"Vista previa 3D",download:"Descargar",edit:"Editar",delete:"Eliminar"},runLog:{title:"Registro de impresión",modalTitle:"Registro de impresión — {{name}}",modalTitleFallback:"este archivo",empty:"Aún no se han registrado eventos de impresión para este archivo.",col:{date:"Fecha",status:"Estado",duration:"Duración",filament:"Filamento",cost:"Coste"},status:{completed:"Completada",failed:"Fallida",cancelled:"Cancelada",stopped:"Detenida",skipped:"Omitida",printing:"Imprimiendo"}},modal:{deleteArchive:"Eliminar archivo",deleteConfirm:'¿Está seguro de que desea eliminar "{{name}}"? Esta acción no se puede deshacer.',deleteButton:"Eliminar",deletePurgeStats:"Eliminar también esta impresión de las estadísticas rápidas (filamento, tiempo, coste, energía)",removeSource3mf:"Eliminar 3MF de origen",removeSource3mfConfirm:'¿Está seguro de que desea eliminar el archivo 3MF de origen de "{{name}}"? Esto eliminará el archivo de proyecto original del laminador.',removeButton:"Eliminar",removeF3d:"Eliminar F3D",removeF3dConfirm:'¿Está seguro de que desea eliminar el archivo de diseño de Fusion 360 de "{{name}}"?',removeTimelapse:"Eliminar time-lapse",removeTimelapseConfirm:'¿Está seguro de que desea eliminar el vídeo time-lapse de "{{name}}"?',timelapse:"{{name}} - Time-lapse",selectTimelapse:"Seleccionar time-lapse",selectTimelapseDesc:"No se encontró ninguna coincidencia automática. Seleccione el time-lapse para esta impresión:",deleteArchives:"Eliminar archivos",deleteArchivesConfirm:"¿Está seguro de que desea eliminar {{count}} archivo(s)? Esta acción no se puede deshacer.",deleteCount:"Eliminar {{count}}"},page:{title:"Archivos",printsCount:"{{filtered}} de {{total}} impresiones",dropFilesHere:"Suelte aquí los archivos .3mf",releaseToUpload:"Suelte para subir",only3mfSupported:"Solo se admiten archivos .3mf",close:"Cerrar",selected:"{{count}} seleccionados",selectAll:"Seleccionar todo",tags:"Etiquetas",project:"Proyecto",favorite:"Favorito",delete:"Eliminar",toggledFavorites:"Se cambió el estado de favorito de {{count}} archivo(s)",failedUpdateFavorites:"Error al actualizar los favoritos",archivesDeleted:"{{count}} archivo(s) eliminado(s)",failedDeleteArchives:"Error al eliminar los archivos",photoDeleted:"Foto eliminada",failedDeletePhoto:"Error al eliminar la foto"},list:{name:"Nombre",printer:"Impresora",date:"Fecha",size:"Tamaño",actions:"Acciones",hasTimelapse:"Tiene time-lapse"},log:{date:"Fecha",printName:"Nombre de la impresión",printer:"Impresora",user:"Usuario",status:"Estado",duration:"Duración",filament:"Filamento",allPrinters:"Todas las impresoras",allUsers:"Todos los usuarios",allStatuses:"Todos los estados",cancelled:"Cancelada",skipped:"Omitida",dateFrom:"Desde",dateTo:"Hasta",noEntries:"No se encontraron entradas en el registro de impresión",showing:"Mostrando {{count}} de {{total}} entradas",rowsPerPage:"Filas",page:"Página",prev:"Anterior",next:"Siguiente",clearLog:"Borrar registro",clearLogTitle:"Borrar el registro de impresión",clearLogConfirm:"Todas las entradas del registro de impresión se eliminarán permanentemente. Los archivos y los elementos de la cola no se ven afectados. Esta acción no se puede deshacer. ¿Está seguro?",clearLogButton:"Borrar todo",cleared:"{{count}} entradas del registro borradas",clearFailed:"Error al borrar el registro de impresión"}},queue:{filamentShort:{rowBadge:"Filamento insuficiente para la bobina asignada",rowTooltip:"El planificador marco este elemento. Pulsa Reproducir para ver el deficit por slot y decidir si imprimir de todos modos.",confirmTitle:"Filamento insuficiente",confirmIntro:"La bobina asignada no puede cubrir al menos un slot. Imprimir de todos modos?",lineItem:"Slot {{slot}}: necesita {{required}} g, quedan {{remaining}} g",unknown:"desconocido",printAnyway:"Imprimir de todos modos"},title:"Cola de impresión",subtitle:"Programe y gestione sus trabajos de impresión",addToQueue:"Añadir a la cola",print:"Imprimir",reprint:"Reimprimir",schedulePrint:"Programar impresión",editQueueItem:"Editar elemento de la cola",printToPrinters:"Imprimir en {{count}} impresoras",queueToPrinters:"Encolar en {{count}} impresoras",queueSelectedPlates:"Encolar {{count}} camas",selectAllPlates:"Seleccionar las {{count}} camas",deselectAll:"Deseleccionar todo",printQueued:"Impresión encolada",itemsQueued:"{{count}} elementos encolados",sending:"Enviando...",sendingProgress:"Enviando {{current}}/{{total}}...",adding:"Añadiendo...",addingProgress:"Añadiendo {{current}}/{{total}}...",savingProgress:"Guardando {{current}}/{{total}}...",clearQueue:"Vaciar la cola",clearHistory:"Borrar el historial",emptyQueue:"La cola está vacía",position:"Posición",scheduledTime:"Hora programada",moveUp:"Subir",moveDown:"Bajar",startNow:"Iniciar ahora",printingInProgress:"Impresión en curso...",viewArchive:"Ver archivo",viewInFileManager:"Ver en el gestor de archivos",itemCount:"{{count}} elemento",itemCount_plural:"{{count}} elementos",dragToReorder:"Arrastre para reordenar (solo elementos «lo antes posible»)",reorderHint:"La posición solo afecta a los elementos «lo antes posible». Los elementos programados se ejecutan a su hora establecida.",sjf:{label:"SJF",tooltip:"Trabajo más corto primero — el planificador prioriza las impresiones más cortas"},addedBy:"Añadido por {{name}}",nextInQueue:"Siguiente en la cola",clearPlateSuccess:"Cama despejada — lista para la próxima impresión",plateNumber:"Cama {{index}}",quantity:"Cantidad",quantityHint:"Crea {{count}} elementos en la cola",activeBatches:"Lotes activos",batchProgress:"{{completed}} de {{total}} completados",cancelBatch:"Cancelar los restantes",batchCancelled:"Elementos restantes del lote cancelados",cancelBatchConfirmTitle:"Cancelar lote",cancelBatchConfirmMessage:"¿Cancelar todos los elementos pendientes restantes de este lote?",batch:"Lote",sections:{currentlyPrinting:"Imprimiendo actualmente",queued:"En cola",history:"Historial"},status:{pending:"Pendiente",waiting:"En espera",printing:"Imprimiendo",paused:"En pausa",completed:"Completada",failed:"Fallida",skipped:"Omitida",cancelled:"Cancelada"},summary:{printing:"Imprimiendo",queued:"En cola",totalTime:"Tiempo total de la cola",totalWeight:"Peso total de la cola",history:"Historial"},filter:{allPrinters:"Todas las impresoras",unassigned:"Sin asignar",allStatus:"Todos los estados",allLocations:"Todas las ubicaciones",any:"Cualquiera"},sort:{byPosition:"Ordenar por posición",byName:"Ordenar por nombre",byPrinter:"Ordenar por impresora",bySchedule:"Ordenar por programación",byDate:"Ordenar por fecha",ascendingOldest:"Ascendente (más antiguos primero)",descendingNewest:"Descendente (más recientes primero)"},badges:{staged:"Preparado",requiresPrevious:"Requiere éxito previo",autoPowerOff:"Apagado automático",gcodeInjection:"G-code"},empty:{title:"No hay impresiones programadas",description:"Programe una impresión desde la página de Archivos con la opción «Programar» del menú contextual, o arrastre y suelte archivos para empezar."},time:{asap:"Lo antes posible",overdue:"Atrasada",now:"Ahora",lessThanMinute:"En menos de un minuto",inMinutes:"En {{count}} min",inHours:"En {{count}} horas"},actions:{stopPrint:"Detener impresión",startPrint:"Iniciar impresión",requeue:"Volver a encolar"},bulkEdit:{title:"Editar {{count}} elemento",title_plural:"Editar {{count}} elementos",description:"Solo se aplicarán los ajustes modificados a los elementos seleccionados.",printer:"Impresora",noChange:"— Sin cambios —",queueOptions:"Opciones de la cola",staged:"Preparado (inicio manual)",autoPowerOff:"Apagado automático tras la impresión",requirePrevious:"Requerir éxito previo",printOptions:"Opciones de impresión",bedLevelling:"Nivelación de la cama",flowCalibration:"Calibración del flujo",vibrationCalibration:"Calibración de vibración",layerInspection:"Inspección de la primera capa",timelapse:"Time-lapse",useAms:"Usar AMS",applyChanges:"Aplicar cambios",selectAll:"Seleccionar todo",deselectAll:"Deseleccionar todo",selected:"{{count}} seleccionados",editSelected:"Editar seleccionados",cancelSelected:"Cancelar seleccionados"},confirm:{cancelTitle:"Cancelar impresión programada",cancelMessage:'¿Está seguro de que desea cancelar "{{name}}"?',stopTitle:"Detener impresión",stopMessage:'¿Está seguro de que desea detener la impresión actual "{{name}}"? Esto cancelará el trabajo de impresión en la impresora.',removeTitle:"Quitar del historial",removeMessage:'¿Está seguro de que desea quitar "{{name}}" del historial de la cola?',clearHistoryTitle:"Borrar el historial",clearHistoryMessage:"¿Está seguro de que desea quitar los {{count}} elemento(s) del historial?",cancelButton:"Cancelar impresión",stopButton:"Detener impresión",thisPrint:"esta impresión",thisItem:"este elemento"},toast:{cancelled:"Elemento de la cola cancelado",cancelFailed:"Error al cancelar el elemento",removed:"Elemento de la cola eliminado",removeFailed:"Error al eliminar el elemento",stopped:"Impresión detenida",stopFailed:"Error al detener la impresión",released:"Impresión liberada a la cola",startFailed:"Error al iniciar la impresión",reorderFailed:"Error al reordenar la cola",historyCleared:"Se borraron {{count}} elemento(s) del historial",clearHistoryFailed:"Error al borrar el historial",updateFailed:"Error al actualizar los elementos",bulkCancelled:"Se cancelaron {{count}} elemento(s)",bulkCancelFailed:"Error al cancelar los elementos"},timeline:{listView:"Lista",timelineView:"Cronología",unassigned:"Sin asignar",noData:"No hay impresiones programadas para este día",allDoneBy:"Todas las impresiones estimadas para las {{time}}",staged:"Preparado",filterAll:"Mostrar todo",filterPrinting:"Imprimiendo",filterQueued:"En cola",time:{anyMoment:"en cualquier momento",minutesLeft:"{{minutes}} min restantes",hoursLeft:"{{hours}} h restantes",hoursMinutesLeft:"{{hours}} h {{minutes}} min restantes"},day:{previous:"Día anterior",next:"Día siguiente",today:"Hoy"}},permissions:{noStopPrint:"No tiene permiso para detener impresiones",noStartPrint:"No tiene permiso para iniciar impresiones",noEdit:"No tiene permiso para editar este elemento de la cola",noCancel:"No tiene permiso para cancelar este elemento de la cola",noRequeue:"No tiene permiso para volver a encolar elementos",noRemove:"No tiene permiso para eliminar este elemento de la cola",noClearHistory:"No tiene permiso para borrar todo el historial",noEditItems:"No tiene permiso para editar elementos de la cola",noCancelItems:"No tiene permiso para cancelar elementos de la cola"}},backgroundDispatch:{unknownFile:"Archivo desconocido",unknownPrinter:"Impresora desconocida",startingPrints:"Iniciando impresiones",progressSummary:"{{complete}}/{{total}} completadas • Enviadas: {{dispatched}} • Procesando: {{processing}}",expandDetails:"Expandir los detalles del envío",collapseDetails:"Contraer los detalles del envío",dismissToast:"Descartar la notificación de envío",cancelDispatchJob:"Cancelar el trabajo de envío",cancel:"Cancelar",cancelling:"Cancelando…",awaitingPrinter:"Esperando a la impresora…",status:{dispatched:"Enviada",processing:"Procesando",completed:"Completada",failed:"Fallida",cancelled:"Cancelada"},toast:{cancellingUpload:"Cancelando la subida...",cancelled:"Envío cancelado",cancelFailed:"Error al cancelar el envío",completeWithFailures:"Envío en segundo plano completado: {{completed}} con éxito, {{failed}} con error",completeSuccess:"Envío en segundo plano completado: {{completed}} con éxito",printStartedRemaining:"{{completed}} impresión(es) iniciada(s), enviando {{remaining}} más..."}},stats:{title:"Estadísticas",subtitle:"Arrastre los widgets para reorganizarlos. Haga clic en el icono del ojo para ocultarlos.",overview:"Resumen",totalPrints:"Impresiones totales",successRate:"Tasa de éxito",totalPrintTime:"Tiempo total de impresión",printTime:"Tiempo de impresión",totalFilament:"Filamento total usado",filamentUsed:"Filamento usado",filamentCost:"Coste del filamento",totalCost:"Coste total",energyUsed:"Energía usada",energyCost:"Coste de la energía",energyWarmingUpTooltip:"El seguimiento de energía aún está recopilando instantáneas horarias. Los totales por rango de fechas serán precisos una vez que exista al menos una instantánea antes del rango seleccionado. Los valores iniciales pueden quedarse cortos.",averagePrintTime:"Tiempo medio de impresión",printsPerDay:"Impresiones por día",byPrinter:"Por impresora",printsByPrinter:"Impresiones por impresora",byMaterial:"Por material",byMonth:"Por mes",last7Days:"Últimos 7 días",last30Days:"Últimos 30 días",last90Days:"Últimos 90 días",allTime:"Todo el tiempo",quickStats:"Estadísticas rápidas",printActivity:"Actividad de impresión",filamentTypes:"Tipos de filamento",filamentTrends:"Tendencias del filamento",failureAnalysis:"Análisis de fallos",timeAccuracy:"Precisión temporal",successful:"Con éxito:",failed:"Fallidas:",cancelled:"Canceladas:",perfectEstimate:"100% = estimación perfecta",noTimeAccuracyData:"Aún no hay datos de precisión temporal",noFilamentData:"No hay datos de filamento disponibles",noPrinterData:"No hay datos de impresora disponibles",noPrintData:"No hay datos de impresión disponibles",noPrintDataLast30Days:"No hay datos de impresión en los últimos 30 días",failureReasons:"Motivos de fallo",topFailureReasons:"Principales motivos de fallo",failedPrintsCount:"{{failed}} / {{total}} impresiones fallidas",lastWeekRate:"Semana pasada: {{rate}}%",resetLayout:"Restablecer disposición",recalculateCosts:"Recalcular costes",recalculateCostsHint:"Recalcular todos los costes de archivo usando los precios actuales del filamento",exportStats:"Exportar estadísticas",exportAsCsv:"Exportar como CSV",exportAsExcel:"Exportar como Excel",hiddenCount:"{{count}} ocultos",exportDownloaded:"Exportación descargada",exportFailed:"Error en la exportación",layoutReset:"Disposición restablecida",recalculatedCosts:"Costes recalculados para {{count}} archivos",recalculateFailed:"Error al recalcular los costes",loadingStats:"Cargando estadísticas...",noPermissionResetLayout:"No tiene permiso para restablecer la disposición",noPermissionRecalculate:"No tiene permiso para recalcular los costes",noPrintDataInRange:"No hay datos de impresión en el rango seleccionado",periodFilament:"Filamento del periodo",periodCost:"Coste del periodo",avgPerPrint:"Promedio por impresión",usageOverTime:"Uso a lo largo del tiempo",filamentByWeight:"Peso",printDuration:"Duración de la impresión",printerUtilization:"Uso de la impresora",filamentSuccess:"Éxito por material",printHabits:"Hábitos de impresión",printTimeOfDay:"Hora del día de impresión",colorDistribution:"Distribución de colores",noColorData:"No hay datos de color disponibles",records:"Récords",longestPrint:"Impresión más larga",heaviestPrint:"Impresión más pesada",mostExpensivePrint:"Más cara",busiestDay:"Día más activo",successStreak:"Racha de éxitos",streakPrint:"impresión consecutiva",streakPrints:"{{count}} impresiones consecutivas",printerStats:"Estadísticas de la impresora",hours:"horas",avgPrints:"Impresiones medias",noArchiveData:"No hay datos de impresión disponibles",filamentByTime:"Tiempo",avgWeight:"Peso medio",avgTime:"Tiempo medio",filamentByPrints:"Impresiones",timeframe:{today:"Hoy","this-week":"Esta semana","this-month":"Este mes","last-7":"Últimos 7 días","last-30":"Últimos 30 días","last-90":"Últimos 90 días","this-year":"Este año","all-time":"Todo el tiempo",custom:"Rango personalizado",from:"Desde",to:"Hasta"},allUsers:"Todos los usuarios",noUser:"Sin usuario (sistema)",filterByUser:"Filtrar por usuario"},maintenance:{title:"Mantenimiento",overview:"Resumen",allOk:"Todo el mantenimiento al día",dueCount:"{{count}} tarea pendiente",dueCount_plural:"{{count}} tareas pendientes",warningCount:"{{count}} advertencia",warningCount_plural:"{{count}} advertencias",totalPrintTime:"Tiempo total de impresión",nextMaintenance:"Próximo mantenimiento",nothingDue:"Nada pendiente",tasks:"Tareas",lastPerformed:"Realizado por última vez",interval:"Intervalo",hoursRemaining:"{{hours}} h restantes",hoursOverdue:"{{hours}} h de retraso",markDone:"Marcar como hecho",performMaintenance:"Realizar mantenimiento",history:"Historial",noHistory:"No hay historial de mantenimiento",editPrintHours:"Editar horas de impresión",currentHours:"Horas actuales",statusTab:"Estado",settingsTab:"Ajustes",overdueCount:"{{count}} atrasadas",dueSoonCount:"{{count}} pronto pendientes",dueSoon:"Pronto pendiente",allGood:"Todo correcto",overdueBy:"Atrasado {{duration}}",dueIn:"Pendiente en {{duration}}",timeLeft:"{{duration}} restante",day:"1 día",days:"{{count}} días",week:"1 semana",weeks:"{{count}} semanas",month:"1 mes",months:"{{count}} meses",year:"1 año",maintenanceTypes:"Tipos de mantenimiento",maintenanceTypesDescription:"Tipos del sistema y sus tareas de mantenimiento personalizadas",addCustomType:"Añadir tipo personalizado",restoreDefaults:"Restaurar tareas predeterminadas",intervalType:"Tipo de intervalo",intervalValue:"Intervalo ({{type}})",icon:"Icono",documentationLink:"Enlace de documentación (opcional)",assignToPrinters:"Asignar a impresoras",selectAtLeastOnePrinter:"Seleccione al menos una impresora",addType:"Añadir tipo",custom:"Personalizado",printHours:"Horas de impresión",calendarDays:"Días naturales",exampleName:"p. ej., Reemplazar filtro HEPA",viewDocumentation:"Ver documentación",timeBasedInterval:"Intervalo basado en el tiempo",intervalOverrides:"Anulaciones de intervalo",intervalOverridesDescription:"Personalizar intervalos para impresoras concretas",assignedToPrinters:"Asignado a las impresoras:",noPrintersAssigned:"No hay impresoras asignadas",addPrinterShort:"Añadir:",printersAssignedClick:"{{count}} impresora(s) asignada(s) - haga clic para gestionar",removeFromPrinter:"Quitar de esta impresora",types:{lubricateCarbonRods:"Lubricar varillas de carbono",lubricateRails:"Lubricar guías lineales",cleanNozzle:"Limpiar boquilla/fusor",checkBelts:"Comprobar la tensión de las correas",cleanBuildPlate:"Limpiar la cama de impresión",checkExtruder:"Comprobar los engranajes del extrusor",checkCooling:"Comprobar los ventiladores de refrigeración",generalInspection:"Inspección general",cleanCarbonRods:"Limpiar varillas de carbono",lubricateSteelRods:"Lubricar varillas de acero",cleanSteelRods:"Limpiar varillas de acero",cleanLinearRails:"Limpiar guías lineales",checkPtfeTube:"Comprobar el tubo de PTFE",replaceHepaFilter:"Reemplazar filtro HEPA",replaceCarbonFilter:"Reemplazar filtro de carbono",lubricateLeftNozzleRail:"Lubricar la guía de la boquilla izquierda"},maintenanceComplete:"Mantenimiento marcado como completado",typeUpdated:"Tipo de mantenimiento actualizado",typeDeleted:"Tipo de mantenimiento eliminado",defaultsRestored:"Se restauraron {{count}} tarea(s) predeterminada(s)",printHoursUpdated:"Horas de impresión actualizadas",printerAssigned:"Impresora asignada",printerRemoved:"Impresora eliminada",deleteTypeConfirm:'¿Eliminar "{{name}}"?',deleteSystemTypeTitle:"¿Eliminar la tarea de mantenimiento predeterminada?",deleteSystemTypeMessage:'¿Está seguro de que desea eliminar la tarea de mantenimiento predeterminada "{{name}}"?',noPermissionUpdate:"No tiene permiso para actualizar elementos de mantenimiento",noPermissionPerform:"No tiene permiso para realizar mantenimiento",noPermissionEditTypes:"No tiene permiso para editar tipos de mantenimiento",noPermissionDeleteTypes:"No tiene permiso para eliminar tipos de mantenimiento",noPermissionEditHours:"No tiene permiso para editar las horas de impresión",noPermissionRemovePrinter:"No tiene permiso para quitar asignaciones de impresoras",noPermissionAssignPrinter:"No tiene permiso para asignar impresoras",noPermissionEditIntervals:"No tiene permiso para editar intervalos",configureSettings:"Configurar tipos e intervalos de mantenimiento"},settings:{title:"Ajustes",general:"General",tabs:{general:"General",smartPlugs:"Enchufes inteligentes",notifications:"Notificaciones",queue:"Flujo de trabajo",filament:"Filamento",network:"Red",apiKeys:"Claves API",virtualPrinter:"Impresora virtual",spoolbuddy:"SpoolBuddy",failureDetection:"Detección de fallos",users:"Autenticación",backup:"Copia de seguridad",emailAuth:"Autenticación por correo",ldap:"LDAP",twoFa:"Autenticación de dos factores",oidc:"SSO / OIDC",security:"Seguridad"},spoolbuddy:{infoTitle:"Dispositivos SpoolBuddy",infoBody:"Los quioscos SpoolBuddy se registran automáticamente mediante una señal de latido. Anule el registro de un dispositivo aquí si ya no está en uso o si quedó un duplicado obsoleto tras el fallo de un demonio.",duplicatesTitle:"{{count}} dispositivos registrados",duplicatesBody:"La interfaz del quiosco solo usa el primer dispositivo registrado. Si uno de estos es un duplicado obsoleto de un fallo, anule su registro — un dispositivo en línea se volverá a registrar en su próxima señal de latido.",empty:"Aún no hay dispositivos SpoolBuddy registrados.",online:"En línea",offline:"Desconectado",unregister:"Anular registro",unregisterSuccess:"Registro del dispositivo anulado",unregisterError:"Error al anular el registro del dispositivo",confirmTitle:"¿Anular el registro del dispositivo SpoolBuddy?",confirmBody:'Esto eliminará "{{hostname}}" ({{deviceId}}) de la base de datos. Si el dispositivo está en línea, se volverá a registrar en su próxima señal de latido.',ipAddress:"Dirección IP",firmware:"Firmware",lastSeen:"Visto por última vez",daemonUptime:"Tiempo de actividad del demonio",systemUptime:"Tiempo de actividad del sistema",never:"nunca",nfc:"NFC",scale:"Báscula",cpuTemp:"Temp. de CPU",cpuLoad:"Carga de CPU",memory:"Memoria",disk:"Disco",update:"Actualizar",updateConfirmTitle:"¿Actualizar el demonio de Spoolbuddy?",updateConfirmBody:'¿Iniciar una actualización de software en "{{hostname}}"? El demonio se reiniciará una vez aplicada la actualización.',restartBrowser:"Reiniciar navegador",restartBrowserConfirmTitle:"¿Reiniciar el navegador del quiosco?",restartBrowserConfirmBody:'¿Reiniciar el navegador del quiosco en "{{hostname}}"? La pantalla se quedará en negro brevemente.',restartDaemon:"Reiniciar demonio",restartDaemonConfirmTitle:"¿Reiniciar el demonio de Spoolbuddy?",restartDaemonConfirmBody:'¿Reiniciar el demonio de Spoolbuddy en "{{hostname}}"? El dispositivo se desconectará durante unos segundos.',reboot:"Reiniciar",rebootConfirmTitle:"¿Reiniciar el dispositivo?",rebootConfirmBody:'¿Reiniciar "{{hostname}}"? El dispositivo estará desconectado durante alrededor de un minuto.',shutdown:"Apagar",shutdownConfirmTitle:"¿Apagar el dispositivo?",shutdownConfirmBody:'¿Apagar "{{hostname}}"? Necesitará acceso físico para volver a encenderlo.',commandConfirm:"Confirmar",commandQueued:"Comando encolado",commandError:"Error al enviar el comando"},ldap:{title:"Autenticación LDAP",enabledDesc:"La autenticación LDAP está activada",disabledDesc:"La autenticación LDAP está desactivada",disabledHint:"Configure y guarde los ajustes de LDAP a continuación y luego actívela.",enabled:"Autenticación LDAP activada",disabled:"Autenticación LDAP desactivada",feature1:"Los usuarios pueden iniciar sesión con credenciales LDAP",feature2:"La cuenta de administrador local permanece como alternativa",feature3:"Los grupos LDAP se asignan a los grupos de Bambuddy al iniciar sesión",serverConfig:"Configuración del servidor LDAP",serverUrl:"URL del servidor",serverUrlHint:"Use ldaps:// para SSL o ldap:// con StartTLS",security:"Seguridad",securityHint:"StartTLS actualiza una conexión sin cifrar a TLS. LDAPS usa TLS desde el principio.",bindDn:"Bind DN (cuenta de servicio)",bindPassword:"Contraseña de Bind",searchBase:"DN base de búsqueda",userFilter:"Filtro de búsqueda de usuarios",userFilterHint:"{username} se sustituye por el nombre de usuario de inicio de sesión. Use (uid={username}) para OpenLDAP.",advanced:"Avanzado",autoProvision:"Aprovisionar usuarios automáticamente",autoProvisionHint:"Crear automáticamente una cuenta de Bambuddy en el primer inicio de sesión LDAP",defaultGroup:"Grupo predeterminado",defaultGroupNone:"— Ninguno (sin alternativa) —",defaultGroupHint:"Grupo alternativo asignado cuando un usuario LDAP se autentica pero no figura en ningún grupo LDAP asignado. Déjelo vacío para dejar a los usuarios sin asignar sin permisos.",groupMapping:"Asignación de grupos (JSON)",groupMappingHint:"Asignar los DN de grupos LDAP a los grupos de Bambuddy. Grupos disponibles: ",testConnection:"Probar conexión",settingsSaved:"Ajustes de LDAP guardados",errors:{serverRequired:"La URL del servidor LDAP es obligatoria",searchBaseRequired:"El DN base de búsqueda es obligatorio",enableAuthFirst:"Active primero la autenticación",configureLdapFirst:"Guarde primero los ajustes de LDAP"}},email:{smtpSettings:"Configuración SMTP",smtpHost:"Servidor SMTP",smtpPort:"Puerto SMTP",security:"Seguridad",authentication:"Autenticación",username:"Nombre de usuario",password:"Contraseña",fromEmail:"Correo del remitente",fromName:"Nombre del remitente",testConnection:"Probar conexión SMTP",testRecipient:"Correo del destinatario de prueba",sendTest:"Enviar correo de prueba",sending:"Enviando...",save:"Guardar ajustes",saving:"Guardando...",advancedAuth:"Autenticación avanzada",advancedAuthEnabled:"La autenticación avanzada está activada",advancedAuthEnabledDesc:"Las funciones de gestión de usuarios basadas en correo están activas. Los nuevos usuarios recibirán contraseñas autogeneradas por correo, y los usuarios podrán restablecer sus contraseñas mediante la función de contraseña olvidada.",advancedAuthDisabled:"La autenticación avanzada está desactivada",advancedAuthDisabledDesc:"Active la autenticación avanzada para habilitar las funciones basadas en correo para la gestión de usuarios.",enable:"Activar",disable:"Desactivar",feature1:"Las contraseñas se autogeneran y se envían por correo a los nuevos usuarios",feature2:"Los usuarios pueden iniciar sesión con el nombre de usuario o el correo",feature3:"La función de contraseña olvidada está disponible",feature4:"Los administradores pueden restablecer las contraseñas de los usuarios por correo",errors:{requiredFields:"Rellene todos los campos obligatorios",usernameRequired:"El nombre de usuario es obligatorio cuando la autenticación está activada",enterTestEmail:"Introduzca una dirección de correo de prueba",smtpServerAndEmail:"Rellene el servidor SMTP y el correo del remitente antes de probar",usernamePasswordRequired:"El nombre de usuario y la contraseña son obligatorios cuando la autenticación está activada",configureSmtpFirst:"Configure y pruebe primero los ajustes de SMTP",enableAuthFirst:"Active primero la autenticación para usar las funciones basadas en correo."},success:{settingsSaved:"Ajustes de SMTP guardados correctamente"},securityOptions:{starttls:"STARTTLS (puerto 587)",ssl:"SSL/TLS (puerto 465)",none:"Ninguna (puerto 25)"},authOptions:{enabled:"Activada",disabled:"Desactivada"}},appearance:"Apariencia",notifications:"Notificaciones",smartPlugs:"Enchufes inteligentes",spoolman:"Spoolman",updates:"Actualizaciones",language:"Idioma",languageDescription:"Seleccione su idioma preferido",theme:"Tema",themeLight:"Claro",themeDark:"Oscuro",themeSystem:"Sistema",defaultView:"Vista predeterminada",defaultViewDescription:"Página que se muestra al abrir la aplicación",checkForUpdates:"Buscar actualizaciones",autoUpdate:"Actualización automática",currentVersion:"Versión actual",latestVersion:"Versión más reciente",upToDate:"Está actualizado",updateAvailable:"Actualización disponible",notificationLanguage:"Idioma de las notificaciones",notificationLanguageDescription:"Idioma de las notificaciones push",bedCooledThreshold:"Umbral de cama enfriada",bedCooledThresholdDescription:"Temperatura por debajo de la cual se considera que la cama se ha enfriado tras una impresión",userNotificationsEnabled:"Notificaciones de usuario",userNotificationsEnabledDescription:"Activa el menú de notificaciones de usuario y las notificaciones por correo de los eventos de los trabajos de impresión. Requiere autenticación avanzada.",userNotificationsDisabledHint:"Active la autenticación avanzada para usar las notificaciones de usuario.",notificationProviders:"Proveedores de notificaciones",addProvider:"Añadir proveedor",editProvider:"Editar proveedor",providerType:"Tipo de proveedor",testNotification:"Notificación de prueba",testSuccess:"Notificación de prueba enviada correctamente",testFailed:"Error al enviar la notificación de prueba",quietHours:"Horas de silencio",quietHoursDescription:"No molestar durante estas horas",quietHoursStart:"Inicio",quietHoursEnd:"Fin",events:{title:"Eventos de notificación",printStart:"Impresión iniciada",printComplete:"Impresión completada",printFailed:"Impresión fallida",printStopped:"Impresión detenida",printProgress:"Hitos de progreso",printProgressDescription:"Notificar al 25%, 50% y 75%",printerOffline:"Impresora desconectada",printerError:"Error de la impresora",filamentLow:"Filamento bajo",maintenanceDue:"Mantenimiento pendiente",maintenanceDueDescription:"Notificar cuando se necesite mantenimiento"},smartPlug:{title:"Enchufes inteligentes",add:"Añadir enchufe inteligente",edit:"Editar enchufe inteligente",name:"Nombre",ipAddress:"Dirección IP",linkedPrinter:"Impresora vinculada",autoOn:"Encendido automático",autoOnDescription:"Encender cuando comienza la impresión",autoOff:"Apagado automático",autoOffDescription:"Apagar tras completar la impresión",offDelay:"Retardo de apagado",offDelayMinutes:"Minutos tras la impresión",offDelayTemp:"Cuando la boquilla está por debajo de la temperatura",currentState:"Estado actual",turnOn:"Encender",turnOff:"Apagar"},filamentTracking:"Seguimiento del filamento",filamentTrackingDesc:"Elija cómo realizar el seguimiento de sus bobinas de filamento. Puede usar el inventario integrado o conectar un servidor Spoolman externo.",filamentChecks:"Comprobaciones de filamento",disableFilamentWarnings:"Desactivar las advertencias de filamento",disableFilamentWarningsDesc:"No mostrar advertencias sobre filamento insuficiente al imprimir o encolar",preferLowestFilament:"Preferir el filamento con menos restante",preferLowestFilamentDesc:"Cuando varias bobinas coincidan, usar la que tenga menos filamento restante",trackingModeBuiltIn:"Inventario integrado",trackingModeBuiltInDesc:"Incluye coincidencia automática por RFID y seguimiento del uso",trackingModeSpoolmanDesc:"Servidor externo de gestión de filamento",builtInFeatureRfid:"Detecta automáticamente las bobinas RFID de Bambu Lab en el AMS",builtInFeatureUsage:"Realiza el seguimiento del consumo de filamento por impresión",builtInFeatureCatalog:"Gestione bobinas, colores y perfiles de factor K",builtInFeatureThirdParty:"Las bobinas de terceros se pueden asignar a bobinas del inventario",amsSyncButton:"Sincronizar pesos desde el AMS",amsSyncTitle:"Sincronizar los pesos de las bobinas desde el AMS",amsSyncMessage:"Esto sobrescribirá todos los pesos de las bobinas del inventario con los valores actuales de % restante del AMS de las impresoras conectadas. Use esto para recuperarse de datos de peso dañados. Las impresoras deben estar en línea.",amsSyncing:"Sincronizando...",amsSyncSuccess:"{{synced}} bobina(s) sincronizada(s), {{skipped}} omitida(s)",amsSyncError:"Error al sincronizar los pesos desde el AMS",spoolmanAmsSyncButton:"Sincronizar pesos de Spoolman desde el AMS",spoolmanAmsSyncTitle:"Sincronizar los pesos de las bobinas de Spoolman desde el AMS",spoolmanAmsSyncMessage:"Esto actualizará todos los pesos de las bobinas de Spoolman según los valores actuales de % restante del AMS de las impresoras conectadas. Las impresoras deben estar en línea.",spoolmanAmsSyncing:"Sincronizando...",spoolmanAmsSyncSuccess:"{{synced}} bobina(s) sincronizada(s), {{skipped}} omitida(s)",spoolmanAmsSyncError:"Error al sincronizar los pesos de Spoolman desde el AMS",spoolmanAmsSyncErrorUnreachable:"Error al sincronizar los pesos de Spoolman (Spoolman inaccesible)",spoolmanAmsSyncErrorNotConfigured:"Error al sincronizar los pesos de Spoolman (Spoolman no configurado)",spoolmanNotConfigured:"Spoolman no configurado",spoolmanFilamentCatalogTitle:"Catálogo de filamentos de Spoolman",spoolmanFilamentCatalogDesc:"Nombres de filamentos y pesos de tara de su instancia de Spoolman. El nombre y el peso de la bobina se pueden editar aquí; el resto de las propiedades se gestionan directamente en Spoolman.",spoolmanUrl:"URL de Spoolman",spoolmanUrlHint:"URL de su servidor Spoolman (p. ej., http://localhost:7912)",spoolmanConnected:"Conectado",spoolmanDisconnected:"Desconectado",status:"Estado",connect:"Conectar",disconnect:"Desconectar",howSyncWorks:"Cómo funciona la sincronización",syncInfoRfidOnly:"Solo se sincronizan las bobinas oficiales de Bambu Lab con RFID",syncInfoAutoCreate:"Las bobinas nuevas se crean automáticamente en Spoolman en la primera sincronización",syncInfoThirdPartySkipped:"Las bobinas que no son de Bambu Lab (de terceros, rellenadas) se omiten",linkingExistingSpools:"Vincular bobinas existentes",linkingExistingSpoolsDesc:'Para vincular bobinas existentes de Spoolman a su AMS, pase el cursor sobre una ranura del AMS y haga clic en "Vincular a Spoolman".',syncMode:"Modo de sincronización",syncModeAuto:"Automática",syncModeManual:"Solo manual",syncModeAutoDesc:"Los datos del AMS se sincronizan automáticamente cuando se detectan cambios",syncModeManualDesc:"Sincronizar solo cuando se active manualmente",syncAmsData:"Sincronizar datos del AMS",syncAmsDataDesc:"Sincronizar manualmente los datos del AMS de la impresora con Spoolman",allPrinters:"Todas las impresoras",noDefaultPrinter:"Sin predeterminada (preguntar cada vez)",sidebarOrder:"Orden de la barra lateral",saveThumbnails:"Guardar miniaturas",captureFinishPhoto:"Capturar foto de finalización",noPrintersConfigured:"No hay impresoras configuradas",archiveMode:{always:"Crear siempre una entrada de archivo",never:"No crear nunca una entrada de archivo",ask:"Preguntar cada vez"},checkForUpdatesLabel:"Buscar actualizaciones",checkPrinterFirmware:"Comprobar el firmware de la impresora",includeBetaUpdates:"Incluir versiones beta",includeBetaUpdatesDesc:"Notificar sobre versiones beta y preliminares al buscar actualizaciones",enableRetry:"Activar reintentos",homeAssistantDescription:"Controlar enchufes inteligentes mediante Home Assistant",environmentManagedLabel:"(Gestionado por el entorno)",autoEnabledViaEnv:"Activado automáticamente mediante variables de entorno",urlFromEnvReadOnly:"Valor establecido por la variable de entorno HA_URL (solo lectura)",tokenFromEnvReadOnly:"Valor establecido por la variable de entorno HA_TOKEN (solo lectura)",mqttConnectedTo:"Conectado a",prometheusDescription:"Exponer los datos de la impresora en formato Prometheus",noSmartPlugsTitle:"No hay enchufes inteligentes configurados",noSmartPlugsDescription:"Añada un enchufe inteligente basado en Tasmota para realizar el seguimiento del consumo de energía y automatizar el control de la alimentación.",noProvidersTitle:"No hay proveedores configurados",noProvidersDescription:"Añada un proveedor para recibir alertas.",noTemplatesAvailable:"No hay plantillas disponibles. Reinicie el backend para cargar las plantillas predeterminadas.",apiPermissionView:"Ver el estado de la impresora y la cola",apiPermissionEdit:"Añadir y quitar elementos de la cola de impresión",apiKeysEmptyTitle:"No hay claves API",apiKeysEmptyDescription:"Cree una clave API para integrarse con servicios externos.",noUsersFound:"No se encontraron usuarios",noGroupsFound:"No se encontraron grupos",noGroupsAvailable:"No hay grupos disponibles",passwordsDoNotMatch:"Las contraseñas no coinciden",systemGroupWarning:"Los nombres de los grupos del sistema no se pueden cambiar",authDisabledTitle:"La autenticación está desactivada",authDisabledFeature1:"Exigir inicio de sesión para acceder al sistema",authDisabledFeature2:"Crear varios usuarios con permisos basados en grupos",authDisabledFeature3:"Controlar el acceso con más de 50 permisos granulares",userHasCreated:"Este usuario ha creado:",userItemsQuestion:"¿Qué desea hacer con estos elementos?",deleteUserConfirm:"¿Está seguro de que desea eliminar este usuario?",actionCannotBeUndone:"Esta acción no se puede deshacer.",addFirstSmartPlug:"Añada su primer enchufe inteligente",providers:"Proveedores",log:"Registro",testAll:"Probar todo",testResults:"Resultados de la prueba",testPassedCount:"{{count}} superadas",testFailedCount:"{{count}} fallidas",messageTemplates:"Plantillas de mensajes",messageTemplatesDescription:"Personalice los mensajes de notificación para cada evento.",apiKeys:"Claves API",apiKeysDescription:"Cree claves API para integraciones externas y webhooks.",createKey:"Crear clave",apiKeyCreated:"Clave API creada correctamente",apiKeyCopyWarning:"¡Copie esta clave ahora; no se volverá a mostrar!",useInApiBrowser:"Usar en el explorador de API",createNewApiKey:"Crear nueva clave API",keyName:"Nombre de la clave",keyNamePlaceholder:"p. ej., Home Assistant, OctoPrint",readStatus:"Leer estado",readStatusDescription:"Ver el estado de la impresora y la cola",manageQueue:"Gestionar la cola",manageQueueDescription:"Añadir y quitar elementos de la cola de impresión",controlPrinter:"Controlar la impresora",controlPrinterDescription:"Pausar, reanudar y detener impresiones",manageLibrary:"Gestionar biblioteca",manageLibraryDescription:"Subir, renombrar y eliminar archivos de la biblioteca; importar modelos desde MakerWorld",manageInventory:"Gestionar inventario",manageInventoryDescription:"Crear, actualizar y eliminar bobinas y registros de inventario. Necesario para los quioscos SpoolBuddy (escaneo NFC, lecturas de balanza, comandos del sistema del quiosco).",libraryBadge:"Biblioteca",inventoryBadge:"Inventario",cloudAccess:"Permitir el acceso a la nube",cloudAccessDescription:"Leer los preajustes y filamentos de Bambu Cloud en su nombre. Requiere que haya iniciado sesión en Bambu Cloud.",cloudBadge:"Nube",updateEnergyCost:"Actualizar el precio de la electricidad",updateEnergyCostDescription:"Permite que esta clave envíe por POST un nuevo precio de electricidad por kWh a /settings/electricity-price. Útil para las automatizaciones de tarifa dinámica de Home Assistant (Tibber, Octopus, etc.). Este es el único campo de ajustes que se puede escribir mediante una clave API.",energyCostBadge:"Energía",legacyKey:"Heredada",legacyKeyTooltip:"Creada antes de la propiedad por usuario; vuelva a crearla para usar el acceso a la nube",unnamedKey:"Clave sin nombre",lastUsed:"Usada por última vez",read:"Lectura",control:"Control",createFirstKey:"Cree su primera clave",webhookEndpoints:"Puntos de conexión de webhook",webhookApiKeyHint:"Use su clave API en la cabecera X-API-Key.",webhook:{getAllStatus:"Obtener el estado de todas las impresoras",getSpecificStatus:"Obtener el estado de una impresora concreta",addToQueue:"Añadir a la cola de impresión",pausePrint:"Pausar impresión",resumePrint:"Reanudar impresión",stopPrint:"Detener impresión"},apiBrowser:"Explorador de API",apiBrowserDescription:"Explore y pruebe todos los puntos de conexión de API disponibles.",apiKeyForTesting:"Clave API para pruebas",apiKeyPlaceholder:"Pegue aquí su clave API para probar los puntos de conexión autenticados...",apiKeyHint:"Esta clave se enviará como cabecera X-API-Key en las solicitudes.",deleteApiKeyTitle:"Eliminar clave API",deleteApiKeyMessage:"¿Está seguro de que desea eliminar esta clave API? Cualquier integración que use esta clave dejará de funcionar.",deleteKey:"Eliminar clave",amsDisplayThresholds:"Umbrales de visualización del AMS",amsThresholdsDescription:"Configure los umbrales de color para los indicadores de humedad y temperatura del AMS.",humidity:"Humedad",goodGreen:"Buena (verde)",fairOrange:"Aceptable (naranja)",aboveFairBad:"Por encima del umbral aceptable se muestra en rojo (mala)",fairAlsoDryingThreshold:"Este umbral también se usa para activar el secado automático cuando está habilitado",temperature:"Temperatura",goodBlue:"Buena (azul)",aboveFairHot:"Por encima del umbral aceptable se muestra en rojo (caliente)",historyRetention:"Retención del historial",keepSensorHistory:"Conservar el historial del sensor durante",historyRetentionDescription:"Los datos de humedad y temperatura más antiguos se eliminarán automáticamente",defaultPrintOptions:"Opciones de impresión predeterminadas",defaultPrintOptionsDescription:"Establezca valores predeterminados para las opciones de impresión al iniciar nuevas impresiones. Se pueden anular por impresión en el diálogo de impresión.",defaultBedLevelling:"Nivelación de la cama",defaultBedLevellingDesc:"Nivelar automáticamente la cama antes de imprimir",defaultFlowCali:"Calibración del flujo",defaultFlowCaliDesc:"Calibrar el flujo de extrusión",defaultVibrationCali:"Calibración de vibración",defaultVibrationCaliDesc:"Reducir los artefactos de resonancia",defaultLayerInspect:"Inspección de la primera capa",defaultLayerInspectDesc:"Inspección de la primera capa por IA",defaultTimelapse:"Time-lapse",defaultTimelapseDesc:"Grabar vídeo time-lapse",staggeredStart:"Inicio escalonado",staggeredStartDescription:"Tamaño de grupo e intervalo predeterminados al escalonar los inicios de lotes en varias impresoras. Se pueden anular por lote en la ventana de impresión.",plateClear:"Confirmación de cama despejada",requirePlateClear:"Requerir confirmación de cama despejada",requirePlateClearDescription:'Cuando está activado, el planificador espera la confirmación de cama despejada por impresora antes de iniciar impresiones en cola en impresoras con trabajos finalizados. Desactivar esto también oculta la insignia de estado de la cama y el botón "Marcar cama como despejada" en las tarjetas de impresora.',gcodeInjection:"Inyección de G-code",gcodeInjectionDescription:'Configure G-code personalizado para inyectar al inicio o al final de las impresiones para sistemas de impresión automática como Farmloop, SwapMod, AutoClear y Printflow 3D. Los fragmentos se configuran por modelo de impresora y se aplican cuando se activa "Inyectar G-code" en un elemento de la cola.',gcodeInjectionNoPrinters:"No se encontraron impresoras. Añada impresoras para configurar fragmentos de G-code.",gcodeStartLabel:"G-code de inicio",gcodeEndLabel:"G-code de fin",gcodeStartPlaceholder:"G-code añadido antes de que comience la impresión...",gcodeEndPlaceholder:"G-code añadido después de que termine la impresión...",staggerGroupSize:"Tamaño de grupo",staggerGroupSizeHelp:"Impresoras que se inician simultáneamente por grupo",staggerInterval:"Intervalo (minutos)",staggerIntervalHelp:"Retardo entre el inicio de cada grupo",queueDrying:"Secado automático de la cola",queueDryingDescription:"Secar automáticamente el filamento del AMS cuando la impresora está inactiva entre impresiones en cola. Usa el umbral de humedad de arriba para activar el secado.",queueDryingEnabled:"Activar el secado automático",queueDryingEnabledDescription:"Iniciar el secado del AMS automáticamente cuando la impresora está inactiva y la humedad supera el umbral",queueDryingBlock:"Esperar a que termine el secado",queueDryingBlockDescription:"Bloquear la cola de impresión hasta que termine el secado. Cuando está desactivado, las impresiones tienen prioridad sobre el secado.",ambientDryingEnabled:"Secado ambiental",ambientDryingEnabledDescription:"Secar automáticamente el filamento en impresoras inactivas cuando la humedad supera el umbral, incluso sin impresiones en cola.",dryingPresets:"Preajustes de secado",dryingPresetsDescription:"Temperatura y duración por tipo de filamento. El AMS 2 Pro usa temperaturas más bajas; el AMS-HT admite temperaturas más altas.",dryingFilament:"Filamento",printModal:"Ventana de impresión",expandCustomMapping:"Expandir el mapeo personalizado de forma predeterminada",expandCustomMappingDescription:"Al imprimir en varias impresoras, mostrar el mapeo de AMS por impresora expandido",authentication:"Autenticación",authEnabledDescription:"Su instancia está protegida con autenticación de usuario",authDisabledDescription:"Active para exigir el inicio de sesión y gestionar el acceso de los usuarios",authDisabledMessage:"Active la autenticación para crear cuentas de usuario, gestionar permisos y proteger su instancia de Bambuddy.",enableAuthentication:"Activar la autenticación",currentUser:"Usuario actual",changePassword:"Cambiar contraseña",admin:"Administrador",users:"Usuarios",addUser:"Añadir usuario",groups:"Grupos",addGroup:"Añadir grupo",system:"Sistema",noDescription:"Sin descripción",userCount:"{{count}} usuarios",permissionCount:"{{count}} permisos",createUser:"Crear usuario",username:"Nombre de usuario",enterUsername:"Introduzca el nombre de usuario",password:"Contraseña",enterPassword:"Introduzca la contraseña",passwordRequirements:"Al menos 8 caracteres, con una mayúscula, una minúscula, un dígito y un carácter especial.",confirmPassword:"Confirmar contraseña",confirmPasswordPlaceholder:"Confirme la contraseña",viewReleaseOnGitHub:"Ver la versión en GitHub",turnAllPlugsOn:"Encender todos los enchufes",turnAllPlugsOff:"Apagar todos los enchufes",clearNotificationLogs:"Borrar los registros de notificaciones",clearLogsMessage:"Esto eliminará permanentemente todos los registros de notificaciones de más de 30 días. Esta acción no se puede deshacer.",clearLogs:"Borrar registros",resetUiPreferences:"Restablecer las preferencias de la interfaz",resetUiPreferencesMessage:"Esto restablecerá todas las preferencias de la interfaz a sus valores predeterminados: orden de la barra lateral, tema, disposición del panel, modos de vista y preferencias de ordenación. Sus impresoras, archivos y ajustes del servidor NO se verán afectados. La página se recargará tras el restablecimiento.",resetPreferences:"Restablecer preferencias",deleteGroupTitle:"Eliminar grupo",deleteGroupMessage:"¿Está seguro de que desea eliminar este grupo? Los usuarios de este grupo perderán estos permisos.",deleteGroup:"Eliminar grupo",disableAuthenticationTitle:"Desactivar la autenticación",disableAuthenticationMessage:"¿Está seguro de que desea desactivar la autenticación? Esto hará que su instancia de Bambuddy sea accesible sin iniciar sesión. Todos los usuarios permanecerán en la base de datos, pero la autenticación se desactivará.",disableAuthentication:"Desactivar la autenticación",configureBambuddy:"Configurar Bambuddy",systemDefault:"Predeterminado del sistema",archiveSettings:"Ajustes de archivado",newWindow:"Ventana nueva",embeddedOverlay:"Superposición integrada",preferredSlicer:"Laminador preferido",preferredSlicerDescription:"Elija con qué aplicación de laminado abrir los archivos",orcaslicerKnownIssuesWarning:"OrcaSlicer 2.3.2 / 2.4.0-dev tienen errores conocidos de la CLI que impiden laminar muchos 3MF creados con Bambu — consulte las incidencias del proyecto original #12426 (cierre inesperado en archivos multiextrusor pintados) y #13386 (rechazo por validación estricta del rango de parámetros). Se recomienda Bambu Studio hasta que lleguen las correcciones.",useSlicerApi:"Usar la API del laminador",useSlicerApiDescription:"Cuando está activado, las acciones de «Laminar» abren la ventana del laminador integrada en la aplicación y llaman al contenedor auxiliar de la API del laminador. Cuando está desactivado (predeterminado), delegan en el laminador de escritorio mediante un esquema de URI.",slicerCard:"Laminador",orcaslicerApiUrl:"OrcaSlicer sidecar URL",bambuStudioApiUrl:"Bambu Studio sidecar URL",slicerApiUrlDescription:"URL del contenedor auxiliar de la API del laminador. Déjelo en blanco para usar los valores predeterminados de las variables de entorno SLICER_API_URL / BAMBU_STUDIO_API_URL.",slicerBundles:{title:"Paquetes del laminador",description:"Importe un paquete de preajustes de impresora (.bbscfg) exportado desde BambuStudio (Archivo → Exportar → Exportar paquete de preajustes → «Paquete de preajustes de impresora»). Una vez importado, las solicitudes de laminado pueden elegir preajustes del paquete por nombre sin volver a subir el trío de perfiles JSON.",uploadButton:"Subir paquete",uploading:"Subiendo…",loading:"Cargando paquetes…",empty:"Aún no se ha importado ningún paquete.",summary:"{{processCount}} preajustes de proceso · {{filamentCount}} de filamento",delete:"Eliminar",uploadSuccess:"{{name}} importado",uploadError:"Error al subir el paquete: {{message}}",deleteSuccess:"Paquete eliminado",deleteError:"Error al eliminar el paquete: {{message}}",confirmDeleteTitle:"¿Eliminar este paquete?",confirmDeleteMessage:'Las solicitudes de laminado que hagan referencia a "{{name}}" fallarán hasta que se vuelva a importar el paquete.'},externalCameras:"Cámaras externas",costTracking:"Seguimiento de costes",printsOnly:"Solo impresiones",totalConsumption:"Consumo total",dataManagement:"Gestión de datos",storageUsage:"Uso del almacenamiento",storageUsageDescription:"Desglose del uso de datos por categoría",storageUsageTotal:"Total",storageUsageErrors:"Errores",storageUsageOtherBreakdown:"Otros (incluye recursos estáticos, scripts y archivos de configuración)",storageUsageSystem:"Sistema",storageUsageData:"Datos",storageUsageUnavailable:"Información de uso del almacenamiento no disponible",clearNotificationLogsDescription:"Eliminar los registros de notificaciones de más de 30 días",resetUiPreferencesDescription:"Restablecer el orden de la barra lateral, el tema, los modos de vista y las preferencias de disposición. Las impresoras, los archivos y los ajustes no se ven afectados.",enableHomeAssistant:"Activar Home Assistant",enableMqtt:"Activar MQTT",useTls:"Usar TLS",enableMetricsEndpoint:"Activar el punto de conexión de métricas",availableMetrics:"Métricas disponibles",editUser:"Editar usuario",deleteUserTitle:"Eliminar usuario",groupName:"Nombre del grupo",leaveEmptyForAnonymous:"Dejar vacío para anónimo",leaveEmptyForNoAuth:"Dejar vacío para sin autenticación",enterNewPassword:"Introduzca la nueva contraseña",confirmNewPassword:"Confirme la nueva contraseña",enterGroupName:"Introduzca el nombre del grupo",enterDescriptionOptional:"Introduzca una descripción (opcional)",enterCurrentPassword:"Introduzca la contraseña actual",enterNewPasswordMin6:"Introduzca la nueva contraseña (mín. 6 caracteres)",toast:{keyCopied:"Clave copiada al portapapeles",copyFailed:"Error al copiar la clave",keyAddedToBrowser:"Clave añadida al explorador de API",clearLogsFailed:"Error al borrar los registros",uiPreferencesReset:"Preferencias de la interfaz restablecidas. Actualizando...",authDisabled:"Autenticación desactivada correctamente",authDisableFailed:"Error al desactivar la autenticación",apiKeyCreated:"Clave API creada",apiKeyDeleted:"Clave API eliminada",userCreated:"Usuario creado correctamente",userUpdated:"Usuario actualizado correctamente",userDeleted:"Usuario eliminado correctamente",groupCreated:"Grupo creado correctamente",groupUpdated:"Grupo actualizado correctamente",groupDeleted:"Grupo eliminado correctamente",fillRequiredFields:"Rellene todos los campos obligatorios",passwordsDoNotMatch:"Las contraseñas no coinciden",passwordTooShort:"La contraseña debe tener al menos 8 caracteres",passwordNeedsUppercase:"La contraseña debe contener al menos una letra mayúscula",passwordNeedsLowercase:"La contraseña debe contener al menos una letra minúscula",passwordNeedsDigit:"La contraseña debe contener al menos un dígito",passwordNeedsSpecial:"La contraseña debe contener al menos un carácter especial",enterGroupName:"Introduzca un nombre de grupo",settingsSaved:"Ajustes guardados",noPermissionUpdate:"No tiene permiso para cambiar los ajustes",cameraSettingsSaved:"Ajustes de la cámara guardados",enterCameraUrl:"Introduzca una URL de cámara",passwordChanged:"Contraseña cambiada correctamente",connectionFailed:"Error de conexión",testFailed:"La prueba falló",cameraConnected:"Cámara conectada{{resolution}}"},testConnection:"Probar conexión",catalog:{spoolCatalog:"Catálogo de bobinas",spoolCatalogDescription:"Pesos de bobinas vacías por marca/tipo. Se usa para la búsqueda automática de peso al añadir bobinas.",searchCatalog:"Buscar en el catálogo...",addNewEntry:"Añadir nueva entrada",namePlaceholder:"Nombre (p. ej., Bambu Lab - Plástico)",weight:"Peso",type:"Tipo",default:"Predeterminado",custom:"Personalizado",noMatch:"Ninguna entrada coincide con su búsqueda",empty:"No hay entradas en el catálogo",deleteEntry:"Eliminar entrada",deleteConfirm:'¿Está seguro de que desea eliminar "{{name}}"?',resetCatalog:"Restablecer catálogo",resetConfirm:"¿Restablecer el catálogo a los valores predeterminados? Esto eliminará todas las entradas personalizadas.",loadFailed:"Error al cargar el catálogo de bobinas",nameWeightRequired:"El nombre y el peso son obligatorios",entryAdded:"Entrada añadida",addFailed:"Error al añadir la entrada",entryUpdated:"Entrada actualizada",updateFailed:"Error al actualizar la entrada",entryDeleted:"Entrada eliminada",deleteFailed:"Error al eliminar la entrada",resetSuccess:"Catálogo restablecido a los valores predeterminados",resetFailed:"Error al restablecer el catálogo",exported:"Se exportaron {{count}} entradas",imported:"Se importaron {{added}} entradas ({{skipped}} omitidas)",importFailed:"Error al importar: formato JSON no válido",exportTooltip:"Exportar el catálogo a JSON",importTooltip:"Importar el catálogo desde JSON",resetTooltip:"Restablecer a los valores predeterminados",selectedCount:"{{count}} seleccionadas",deleteSelected:"Eliminar seleccionadas",bulkDeleteConfirm:"¿Está seguro de que desea eliminar {{count}} entradas?",bulkDeleted:"Se eliminaron {{count}} entradas",bulkDeleteFailed:"Error al eliminar las entradas",material:"Material",spoolWeight:"Peso de la bobina",color:"Color",updateSpoolWeight:"Actualizar el peso de la bobina",filamentUpdated:"Filamento actualizado",filamentUpdateFailed:"Error al actualizar el filamento",filamentUpdateInvalid:"Datos de filamento no válidos",keepExistingSpoolWeight:"Conservar el peso anterior para las bobinas existentes",keepExistingSpoolWeightDesc:"Las bobinas ya creadas con este tipo de filamento conservan el peso de tara anterior. Las bobinas nuevas usan el valor actualizado.",applyToAllSpools:"Aplicar a todas las bobinas",applyToAllSpoolsDesc:"Todos los cálculos de peso para este tipo de filamento usan inmediatamente el nuevo peso de tara."},colorCatalog:{title:"Catálogo de colores",description:"Colores de filamento por fabricante/material. Se usa para la búsqueda automática de color al añadir bobinas.",searchColors:"Buscar colores...",allManufacturers:"Todos los fabricantes",addNewColor:"Añadir nuevo color",manufacturer:"Fabricante",colorName:"Nombre del color",hex:"Hex",materialOptional:"Material (opcional)",showing:"Mostrando {{filtered}} de {{total}} colores",noMatch:"Ningún color coincide con su búsqueda",empty:"No hay colores en el catálogo",deleteColor:"Eliminar color",deleteConfirm:'¿Está seguro de que desea eliminar "{{name}}"?',resetCatalog:"Restablecer el catálogo de colores",resetConfirm:"¿Restablecer el catálogo a los valores predeterminados? Esto eliminará todos los colores personalizados.",sync:"Sincronizar",starting:"Iniciando...",syncTooltip:"Sincronizar desde FilamentColors.xyz (más de 2000 colores, puede tardar un minuto)",loadFailed:"Error al cargar el catálogo de colores",fieldsRequired:"El fabricante, el nombre del color y el color hexadecimal son obligatorios",colorAdded:"Color añadido",addFailed:"Error al añadir el color",colorUpdated:"Color actualizado",updateFailed:"Error al actualizar el color",colorDeleted:"Color eliminado",deleteFailed:"Error al eliminar el color",resetSuccess:"Catálogo de colores restablecido a los valores predeterminados",resetFailed:"Error al restablecer el catálogo",syncUpToDate:"Ya está actualizado ({{count}} colores comprobados)",syncComplete:"Se añadieron {{added}} colores nuevos ({{skipped}} ya existían)",syncError:"Error de sincronización",syncFailed:"Error al sincronizar desde FilamentColors.xyz",exported:"Se exportaron {{count}} colores",imported:"Se importaron {{added}} colores ({{skipped}} omitidos)",importFailed:"Error al importar: formato JSON no válido",selectedCount:"{{count}} seleccionados",deleteSelected:"Eliminar seleccionados",bulkDeleteConfirm:"¿Está seguro de que desea eliminar {{count}} colores?",bulkDeleted:"Se eliminaron {{count}} colores",bulkDeleteFailed:"Error al eliminar los colores"},dateFormat:"Formato de fecha",dateFormatUs:"EE. UU. (MM/DD/AAAA)",dateFormatEu:"UE (DD/MM/AAAA)",dateFormatIso:"ISO (AAAA-MM-DD)",timeFormat:"Formato de hora",timeFormat12:"12 horas (3:30 PM)",timeFormat24:"24 horas (15:30)",defaultPrinter:"Impresora predeterminada",defaultPrinterDescription:"Preseleccione esta impresora para subidas, reimpresiones y otras operaciones.",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"Arrastre los elementos de la barra lateral para reordenarlos. Restablezca aquí el orden predeterminado.",setDefault:"Establecer como predeterminado",sidebarOrderSetDefaultHint:"Establecer como predeterminado aplica el orden de menú actual a los usuarios que no han personalizado el suyo.",sidebarDefaultSet:"Se ha establecido el orden de menú predeterminado.",sidebarDefaultCleared:"Orden de menú predeterminado borrado.",sidebarDefaultFailed:"Error al establecer el orden de menú predeterminado.",reset:"Restablecer",darkMode:"Modo oscuro",lightMode:"Modo claro",active:"(activo)",background:"Fondo",accent:"Acento",style:"Estilo",bgNeutral:"Neutro",bgWarm:"Cálido",bgCool:"Frío",bgOled:"Negro OLED",bgSlate:"Azul pizarra",bgForest:"Verde bosque",accentGreen:"Verde",accentTeal:"Verde azulado",accentBlue:"Azul",accentOrange:"Naranja",accentPurple:"Morado",accentRed:"Rojo",styleClassic:"Clásico",styleGlow:"Resplandor",styleVibrant:"Vibrante",themeToggleHint:"Alterne entre modo oscuro, claro y sistema con el icono en la barra lateral.",autoArchivePrints:"Archivar impresiones automáticamente",autoArchiveDescription:"Guardar automáticamente los archivos 3MF cuando se completan las impresiones",saveThumbnailsDescription:"Extraer y guardar imágenes de vista previa de los archivos 3MF",captureFinishPhotoDescription:"Tomar una foto desde la cámara de la impresora cuando se completa la impresión",ffmpegNotInstalled:"ffmpeg no instalado",ffmpegRequired:"La captura de cámara requiere ffmpeg. Instálelo mediante <brew>brew install ffmpeg</brew> (macOS) o <apt>apt install ffmpeg</apt> (Linux).",camera:"Cámara",cameraViewMode:"Modo de vista de la cámara",cameraOverlayDescription:"La cámara se abre en una superposición redimensionable en la pantalla principal",cameraWindowDescription:"La cámara se abre en una ventana de navegador independiente",externalCamerasDescription:"Configure cámaras externas para sustituir la cámara integrada de la impresora. Admite transmisiones MJPEG, RTSP, capturas HTTP y cámaras USB (V4L2). Cuando está activada, la cámara externa se usa para la vista en directo y las fotos de finalización.",cameraPlaceholderUsb:"Ruta del dispositivo (/dev/video0)",cameraPlaceholderUrl:"URL de la cámara (rtsp://... o http://...)",cameraTypeMjpeg:"Transmisión MJPEG",cameraTypeRtsp:"Transmisión RTSP",cameraTypeSnapshot:"Captura HTTP",cameraTypeUsb:"Cámara USB (V4L2)",cameraSnapshotUrl:"URL de captura (opcional)",cameraSnapshotUrlPlaceholder:"http://192.168.1.61:1984/api/frame.jpeg?src=printer",cameraSnapshotUrlHelp:"URL de fotograma único usada para las miniaturas de notificaciones, las fotos de finalización, los fotogramas de time-lapse por capa y la detección de cama. El time-lapse y la detección de cama requieren cada uno su propio interruptor por impresora; esta URL es solo la fuente de imagen de la que se nutren cuando están activos. Déjelo en blanco para capturar desde la transmisión en directo de arriba. Útil para go2rtc (/api/frame.jpeg) y cámaras IP con un punto de conexión de captura dedicado.",cameraRotation:"Rotación",test:"Probar",connected:"Conectada",disconnected:"Desconectada",currency:"Moneda",defaultFilamentCost:"Coste predeterminado del filamento (por kg)",electricityCost:"Coste de la electricidad por kWh",energyDisplayMode:"Modo de visualización de la energía",energyModePrintDescription:"El panel muestra la suma de la energía usada durante las impresiones",energyModeTotalDescription:"El panel muestra la energía total de los enchufes inteligentes",fileManager:"Gestor de archivos",createArchiveEntry:"Crear una entrada de archivo al imprimir",createArchiveEntryDescription:"Al imprimir desde el gestor de archivos, crear opcionalmente una entrada de archivo",lowDiskSpaceWarning:"Advertencia de poco espacio en disco",lowDiskSpaceDescription:"Mostrar una advertencia cuando el espacio libre en disco caiga por debajo de este umbral",printerFirmware:"Firmware de la impresora",checkFirmwareDescription:"Buscar actualizaciones de firmware de la impresora de Bambu Lab",bambuddySoftware:"Software de Bambuddy",autoCheckDescription:"Buscar automáticamente nuevas versiones al iniciar",checkNow:"Buscar ahora",updateAvailableVersion:"Actualización disponible: v{{version}}",releaseNotes:"Notas de la versión",updateViaDocker:"Actualizar mediante Docker Compose:",updateViaHomeAssistant:"Las actualizaciones las gestiona el Supervisor de Home Assistant. Abra Ajustes → Complementos → Bambuddy en Home Assistant para instalar la nueva versión.",installUpdate:"Instalar actualización",latestVersionRunning:"Está ejecutando la versión más reciente",failedToCheckUpdates:"Error al buscar actualizaciones: {{error}}",backupRestore:"Copia de seguridad y restauración",backupRestoreDescription:"Exportar/importar ajustes y configurar la copia de seguridad en GitHub",goToBackup:"Ir a la copia de seguridad",externalUrl:"URL externa",externalUrlDescription:"La URL externa donde Bambuddy es accesible. Se usa para las imágenes de notificación y las integraciones externas.",bambuddyUrl:"URL de Bambuddy",externalUrlHint:"Incluya el protocolo y el puerto (p. ej., http://192.168.1.100:8000)",ftpRetry:"Reintento de FTP",ftpRetryDescription:"Reintentar las operaciones FTP cuando el Wi-Fi de la impresora no es fiable. Se aplica a las descargas de 3MF, las subidas de impresión, las descargas de time-lapse y las actualizaciones de firmware.",autoRetryDescription:"Reintentar automáticamente las operaciones FTP fallidas",retryAttempts:"Intentos de reintento",retryDelay:"Retardo de reintento",connectionTimeout:"Tiempo de espera de la conexión",time_one:"{{count}} vez",time_other:"{{count}} veces",second_one:"{{count}} segundo",second_other:"{{count}} segundos",nSeconds:"{{count}} segundos",increaseForWeakWifi:"Aumente para impresoras con Wi-Fi débil",homeAssistant:"Home Assistant",homeAssistantFullDescription:"Conéctese a Home Assistant para controlar enchufes inteligentes mediante la API REST de HA. Admite las entidades switch, light, input_boolean y script.",homeAssistantUrl:"URL de Home Assistant",longLivedAccessToken:"Token de acceso de larga duración",haTokenHint:"Cree un token en HA: Perfil → Tokens de acceso de larga duración → Crear token",connectionSuccessful:"Conexión correcta",connectionFailed:"Error de conexión",haConnectionSuccess:"Conexión con Home Assistant realizada correctamente.",haConnectionFailed:"Error al conectar con Home Assistant.",mqttPublishing:"Publicación MQTT",mqttDescription:"Publique los eventos de Bambuddy en un broker MQTT externo para la integración con Node-RED, Home Assistant y otros sistemas de automatización.",mqttEnableDescription:"Publicar eventos en un broker MQTT externo",brokerHostname:"Nombre de host del broker",port:"Puerto",usernameOptional:"Nombre de usuario (opcional)",passwordOptional:"Contraseña (opcional)",topicPrefix:"Prefijo del tema",topicPrefixHint:"Los temas serán: {{prefix}}/printers/<serial>/status, etc.",prometheusMetrics:"Métricas de Prometheus",prometheusEndpointDescription:"Exponer las métricas de la impresora en <code>/api/v1/metrics</code> para la supervisión con Prometheus/Grafana.",bearerTokenOptional:"Bearer Token (opcional)",bearerTokenHint:"Si se establece, las solicitudes deben incluir <code>Authorization: Bearer <token></code>",metricsConnectionStatus:"Estado de la conexión",metricsPrinterState:"Estado de la impresora (inactiva/imprimiendo/etc.)",metricsPrintProgress:"Progreso de la impresión 0-100%",metricsBedTemp:"Temperatura de la cama",metricsNozzleTemp:"Temperatura de la boquilla",metricsPrintsTotal:"Total de impresiones por resultado",metricsMore:"...y más (capas, ventiladores, cola, uso de filamento)",smartPlugsDescription:"Conecte enchufes inteligentes (Tasmota o Home Assistant) para automatizar el control de la alimentación y realizar el seguimiento del consumo de energía de sus impresoras.",allOn:"Encender todo",allOff:"Apagar todo",addSmartPlug:"Añadir enchufe inteligente",energySummary:"Resumen de energía",currentPower:"Potencia actual",plugsOnline:"{{reachable}}/{{total}} enchufes en línea",today:"Hoy",yesterday:"Ayer",total:"Total",enablePlugsForSummary:"Active enchufes para ver el resumen de energía",addNotificationProvider:"Añadir",systemBadge:"(Sistema)",creating:"Creando...",changing:"Cambiando...",deleteUserAndItems:"Eliminar el usuario Y sus elementos",deleteUserKeepItems:"Eliminar el usuario, conservar los elementos (quedan sin propietario)",ok:"Aceptar",twoFa:{totpTitle:"Aplicación de autenticación (TOTP)",totpDesc:"Use una aplicación de autenticación como Google Authenticator, Aegis o Authy.",emailOtpTitle:"OTP por correo",emailOtpDesc:"Enviar un código de un solo uso a {{email}} cuando inicie sesión.",emailOtpNoEmail:"Añada una dirección de correo a su cuenta para habilitar este método.",addEmailFirst:"Su cuenta no tiene dirección de correo. Pida a un administrador que añada una antes de activar el OTP por correo.",setupTotp:"Configurar la aplicación de autenticación",setupAuthApp:"Configurar la aplicación de autenticación",setupInstructions:"Escanee el código QR de abajo con su aplicación de autenticación y luego confirme con un código.",manualEntry:"¿No puede escanear? Introduzca este secreto manualmente:",scannedContinue:"He escaneado el código — continuar",enterCodeToConfirm:"Introduzca el código de 6 dígitos de su aplicación de autenticación para confirmar la configuración.",activate:"Activar",disableTotp:"Desactivar el autenticador",disableConfirmHint:"Introduzca un código TOTP válido o un código de respaldo para desactivar el autenticador.",totpDisabled:"Aplicación de autenticación desactivada.",emailOtpEnabled:"OTP por correo activado.",emailOtpDisabled:"OTP por correo desactivado.",smtpRequired:"Configure y pruebe primero los ajustes de SMTP.",invalidCode:"Código no válido. Inténtelo de nuevo.",enableEmailOtp:"Activar el OTP por correo",disableEmailOtp:"Desactivar el OTP por correo",emailSetupEnterCode:"Se ha enviado un código de verificación a su dirección de correo. Introdúzcalo a continuación para confirmar que es el propietario de este buzón.",verifyAndEnable:"Verificar y activar",emailDisablePasswordHint:"Introduzca la contraseña de su cuenta para confirmar la desactivación del OTP por correo.",passwordPlaceholder:"Introduzca su contraseña",backupCodesTitle:"Guarde sus códigos de respaldo",backupCodesWarning:"Guarde estos códigos en un lugar seguro. Cada código solo se puede usar una vez y no se volverán a mostrar.",backupCodesRemaining:"Quedan {{count}} códigos de respaldo",savedCodes:"He guardado mis códigos",regenBackup:"Regenerar los códigos de respaldo",regenBackupHint:"Introduzca su código TOTP actual para generar 10 códigos de respaldo nuevos. Todos los códigos de respaldo existentes quedarán invalidados.",newBackupCodes:"Nuevos códigos de respaldo",linkedAccounts:"Cuentas de SSO vinculadas",linkedAccountsDesc:"Estos proveedores de identidad externos están vinculados a su cuenta.",oidcUnlinked:"Cuenta desvinculada."},oidc:{title:"Proveedores SSO / OIDC",desc:"Configure proveedores de OpenID Connect para permitir el inicio de sesión único mediante proveedores de identidad externos.",addProvider:"Añadir proveedor",newProvider:"Nuevo proveedor",empty:"Aún no hay proveedores OIDC configurados.",created:"Proveedor creado.",updated:"Proveedor actualizado.",deleted:"Proveedor eliminado.",refreshIcon:"Actualizar icono",removeIcon:"Quitar icono",iconRefreshed:"Icono actualizado.",iconRemoved:"Icono eliminado.",iconFetchFailed:"No se pudo obtener el icono de la URL del proveedor.",deleteTitle:"Eliminar proveedor",deleteMessage:'¿Eliminar "{{name}}"? Todas las cuentas de usuario vinculadas se desconectarán.',form:{name:"Nombre visible",issuerUrl:"URL del emisor",clientId:"ID de cliente",clientSecret:"Secreto de cliente",scopes:"Ámbitos",iconUrl:"URL del icono (opcional)",enabled:"Activado",autoCreate:"Crear usuarios automáticamente",autoCreateDesc:"Crear automáticamente una cuenta local en el primer inicio de sesión.",autoLink:"Vincular cuentas existentes automáticamente",autoLinkDesc:"Vincular cuentas locales existentes haciendo coincidir el correo en el primer inicio de sesión.",secretHint:"dejar en blanco para conservar el actual",secretPlaceholder:"nuevo secreto",emailClaim:"Claim de correo",emailClaimDesc:"Claim de JWT usado como identidad de correo. Use «preferred_username» o «upn» para Azure Entra ID (que no envía email_verified). Use solo nombres de claim de confianza.",emailClaimPlaceholder:"correo",emailClaimCustomClaimAutoLinkWarning:"Los claims personalizados solo son seguros para la vinculación automática cuando el valor lo administra el inquilino (p. ej. upn / preferred_username de Azure Entra ID). No active la vinculación automática si su IdP permite a los usuarios autoasignarse este claim.",requireEmailVerified:"Requerir correo verificado",requireEmailVerifiedDesc:"Aceptar el claim de correo solo cuando el proveedor lo marca como verificado.",requireEmailVerifiedWarning:"Advertencia: el correo se aceptará incluso sin verificación. Úselo solo con proveedores de confianza.",requireEmailVerifiedAutoLink:"Desactive primero la vinculación automática para cambiar este ajuste.",defaultGroup:"Grupo predeterminado",defaultGroupDesc:"Grupo asignado a los usuarios creados automáticamente. Si no se establece, se usa Visores como alternativa.",defaultGroupViewersFallback:"Visores (predeterminado)"}},encryption:{title:"Estado del cifrado de MFA",enabledFromEnv:"Cifrado en reposo activado (clave de la variable de entorno MFA_ENCRYPTION_KEY)",enabledFromFile:"Cifrado en reposo activado (clave cargada del directorio de datos)",enabledGenerated:"Cifrado en reposo activado con una clave autogenerada",notConfigured:"Cifrado en reposo no configurado",notConfiguredDesc:"Los secretos TOTP y los client_secrets de OIDC se almacenan en texto plano. Establezca MFA_ENCRYPTION_KEY o reinicie Bambuddy con un directorio de datos con permisos de escritura para generar una automáticamente.",allEncrypted:"Todos los secretos de MFA están cifrados en reposo.",legacyRowsLabel:"Filas heredadas en texto plano",encryptedRowsLabel:"Filas cifradas",legacyRowsWarning:"Se detectaron {{count}} fila(s) heredada(s) en texto plano. Vuelva a guardar el proveedor OIDC o vuelva a registrar la aplicación de autenticación del usuario para migrar al almacenamiento cifrado.",backupHint:"La clave autogenerada se almacena en DATA_DIR/.mfa_encryption_key y se incluye en los ZIP de copia de seguridad local. Mantenga sus copias de seguridad seguras o establezca MFA_ENCRYPTION_KEY de forma explícita.",decryptionBrokenTitle:"Falta la clave de cifrado",decryptionBrokenError:"{{count}} registro(s) cifrado(s) no se pueden descifrar porque la clave de cifrado ya no está disponible. Restaure la MFA_ENCRYPTION_KEY anterior o DATA_DIR/.mfa_encryption_key para recuperarlos.",migrationErrorWarning:"{{count}} fila(s) heredada(s) no se pudieron volver a cifrar al iniciar. Revise los registros del servidor y reinicie Bambuddy para reintentarlo."}},notification:{printStarted:{title:"Impresión iniciada",body:"{{printer}}: {{filename}} ha empezado a imprimirse"},printCompleted:{title:"Impresión completada",body:"{{printer}}: {{filename}} se completó correctamente"},printFailed:{title:"Impresión fallida",body:"{{printer}}: {{filename}} ha fallado"},printStopped:{title:"Impresión detenida",body:"{{printer}}: {{filename}} se detuvo"},printProgress:{title:"Progreso de la impresión",body:"{{printer}}: {{filename}} está al {{percent}}%"},printerOffline:{title:"Impresora desconectada",body:"{{printer}} está desconectada"},printerError:{title:"Error de la impresora",body:"{{printer}}: {{error}}"},filamentLow:{title:"Filamento bajo",body:"{{printer}}: el filamento se está agotando"},maintenanceDue:{title:"Mantenimiento pendiente",body:"{{printer}}: {{items}} necesitan atención"}},errors:{generic:"Algo salió mal",networkError:"Error de red. Compruebe su conexión.",notFound:"No encontrado",unauthorized:"No autorizado",serverError:"Error del servidor",validationError:"Compruebe los datos introducidos",printerConnectionFailed:"Error al conectar con la impresora",saveFailed:"Error al guardar los cambios",deleteFailed:"Error al eliminar",loadFailed:"Error al cargar los datos"},hmsErrors:{title:"Errores - {{name}}",noErrors:"No hay errores",viewOnWiki:"Ver en la wiki de Bambu Lab",clearInstructions:"Borre los errores en la impresora para descartarlos aquí.",clearErrors:"Borrar errores",clearSuccess:"Errores HMS borrados",clearFailed:"Error al borrar los errores HMS"},mqttDebug:{title:"Registro de depuración MQTT",searchPlaceholder:"Buscar tema o carga útil...",noMessages:"Aún no se han registrado mensajes",startLoggingHint:"Haga clic en «Iniciar registro» para empezar a capturar mensajes MQTT",noMessagesMatch:"Ningún mensaje coincide con su filtro",adjustFilterHint:"Pruebe a ajustar su búsqueda o los criterios del filtro",incoming:"Entrante",outgoing:"Saliente",loggingStopped:"Registro detenido",loggingActive:"Registro activo - los mensajes se actualizarán automáticamente",startLogging:"Iniciar registro",stopLogging:"Detener registro",clearLog:"Borrar registro",topic:"Tema",timestamp:"Marca de tiempo",direction:"Dirección",all:"Todos"},printerFiles:{title:"Gestor de archivos",storageUsed:"Usado:",storageFree:"Libre:",filterPlaceholder:"Filtrar archivos...",deleteButton:"Eliminar",deleteFiles:"Eliminar {{count}} archivos",deleteFileConfirm:'¿Eliminar "{{name}}"? Esto no se puede deshacer.',deleteFilesConfirm:"¿Eliminar {{count}} archivos seleccionados? Esto no se puede deshacer.",noFiles:"No hay archivos en la impresora",loadingFiles:"Cargando archivos...",failedToLoad:"Error al cargar los archivos",toast:{filesDeleted:"Se eliminaron {{count}} archivo(s)",deleteFailed:"Error al eliminar: {{error}}"}},confirm:{delete:"¿Está seguro de que desea eliminar esto?",unsavedChanges:"Tiene cambios sin guardar. ¿Está seguro de que desea salir?",clearQueue:"¿Está seguro de que desea vaciar la cola?"},login:{title:"Inicio de sesión en Bambuddy",subtitle:"Inicie sesión en su cuenta",username:"Nombre de usuario",usernamePlaceholder:"Introduzca su nombre de usuario",usernameOrEmail:"Nombre de usuario o correo",usernameOrEmailPlaceholder:"Nombre de usuario o @ correo",password:"Contraseña",passwordPlaceholder:"Introduzca su contraseña",signIn:"Iniciar sesión",signingIn:"Iniciando sesión...",rememberMe:"Recordarme",forgotPassword:"¿Olvidó su contraseña?",loginSuccess:"Sesión iniciada correctamente",loginFailed:"Error al iniciar sesión",enterCredentials:"Introduzca el nombre de usuario y la contraseña",enterEmail:"Introduzca su dirección de correo",oidcLoginFailed:"Error en el inicio de sesión con OIDC",oidcErrors:{providerError:"El proveedor de identidad devolvió un error",missingParameters:"A la respuesta de OIDC le faltan parámetros obligatorios",invalidState:"El estado de OIDC no es válido o ya se ha usado",stateExpired:"La sesión de inicio de sesión con OIDC ha caducado — inténtelo de nuevo",providerNotFound:"Proveedor OIDC no encontrado",discoveryFailed:"Error al obtener el documento de descubrimiento de OIDC",invalidDiscovery:"El documento de descubrimiento de OIDC no es válido",networkError:"Error de red durante el intercambio de tokens de OIDC",badResponse:"Respuesta inesperada durante el intercambio de tokens de OIDC",noIdToken:"El proveedor OIDC no devolvió un token de ID",validationFailed:"Error en la validación del token de OIDC",nonceMismatch:"Discrepancia de nonce de OIDC — posible ataque de repetición",missingSubClaim:"Al token de OIDC le falta el claim sub",noLinkedAccount:"Ninguna cuenta local está vinculada a esta identidad de OIDC",accountInactive:"Su cuenta está inactiva",userResolutionFailed:"Error al resolver su cuenta",internalError:"Se produjo un error interno durante el inicio de sesión con OIDC",tokenExchangeFailed:"Error en el intercambio de tokens de OIDC"},forgotPasswordTitle:"Contraseña olvidada",forgotPasswordMessage:"Si ha olvidado su contraseña, póngase en contacto con el administrador de su sistema para restablecerla.",forgotPasswordEmailMessage:"Introduzca su dirección de correo y le enviaremos una contraseña nueva.",emailAddress:"Dirección de correo",emailPlaceholder:"su.correo@ejemplo.com",cancel:"Cancelar",sending:"Enviando...",sendResetEmail:"Enviar correo de restablecimiento",howToReset:"Cómo restablecer su contraseña:",resetStep1:"Póngase en contacto con su administrador de Bambuddy",resetStep2:"Pídale que restablezca su contraseña en la gestión de usuarios",resetStep3:"Puede establecerle una nueva contraseña temporal",resetStep4:"Inicie sesión con la nueva contraseña y cámbiela en Ajustes",gotIt:"Entendido",resetPassword:{title:"Establecer nueva contraseña",subtitle:"Introduzca y confirme su nueva contraseña a continuación.",newPassword:"Nueva contraseña",newPasswordPlaceholder:"Al menos 8 caracteres",confirmPassword:"Confirmar contraseña",confirmPasswordPlaceholder:"Repita la nueva contraseña",saving:"Guardando…",submit:"Establecer nueva contraseña",backToLogin:"Volver al inicio de sesión",passwordsDoNotMatch:"Las contraseñas no coinciden",passwordTooShort:"La contraseña debe tener al menos 8 caracteres",resetFailed:"Error al restablecer la contraseña. Es posible que el enlace haya caducado."},twoFA:{title:"Autenticación de dos factores",subtitle:"Su cuenta está protegida con 2FA. Introduzca el código de verificación a continuación.",methodAuthenticator:"Aplicación de autenticación",methodEmail:"Código por correo",methodBackup:"Código de respaldo",instructionsTotp:"Abra su aplicación de autenticación e introduzca el código de 6 dígitos para Bambuddy.",instructionsEmail:"Se ha enviado un código de 6 dígitos a su dirección de correo. Caduca en 10 minutos.",instructionsEmailNotSent:"Haga clic en el botón de abajo para recibir un código de verificación por correo.",instructionsBackup:"Introduzca uno de sus códigos de recuperación de respaldo de 8 caracteres. Cada código solo se puede usar una vez.",sendCodeButton:"Enviar código por correo",sendingCode:"Enviando...",resendCode:"Reenviar código",codeLabel:"Código de verificación",backupCodeLabel:"Código de respaldo",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"Verificar",verifyingButton:"Verificando...",backToLogin:"← Volver al inicio de sesión",orContinueWith:"o continuar con",signInWith:"Iniciar sesión con {{provider}}",enterCode:"Introduzca el código de verificación",sendCodeFailed:"Error al enviar el código de verificación",invalidCode:"Código no válido. Inténtelo de nuevo."}},setup:{title:"Configuración de Bambuddy",subtitle:"Configure la autenticación para su instancia de Bambuddy",enableAuth:"Activar la autenticación",adminAccount:"Cuenta de administrador",adminAccountDesc:"Si ya existen usuarios administradores, la autenticación se activará usando las cuentas de administrador existentes. Deje los campos de abajo vacíos para usar los administradores existentes, o introduzca nuevas credenciales para crear un nuevo usuario administrador.",adminUsername:"Nombre de usuario del administrador",adminPassword:"Contraseña del administrador",optionalIfAdminExists:"(opcional si existen usuarios administradores)",adminUsernamePlaceholder:"Introduzca el nombre de usuario del administrador (opcional)",adminPasswordPlaceholder:"Introduzca la contraseña del administrador (opcional)",confirmPassword:"Confirmar contraseña",confirmPasswordPlaceholder:"Confirme la contraseña del administrador",settingUp:"Configurando...",completeSetup:"Completar la configuración",toast:{authEnabledAdminCreated:"Autenticación activada y usuario administrador creado",authEnabledExistingAdmins:"Autenticación activada usando los usuarios administradores existentes",setupCompleted:"Configuración completada",enterBothCredentials:"Introduzca el nombre de usuario y la contraseña del administrador, o deje ambos vacíos para usar los usuarios administradores existentes",passwordsDoNotMatch:"Las contraseñas no coinciden",passwordTooShort:"La contraseña debe tener al menos 6 caracteres"}},changePassword:{title:"Cambiar contraseña",currentPassword:"Contraseña actual",currentPasswordPlaceholder:"Introduzca la contraseña actual",newPassword:"Nueva contraseña",newPasswordPlaceholder:"Introduzca la nueva contraseña (mín. 6 caracteres)",confirmPassword:"Confirmar nueva contraseña",confirmPasswordPlaceholder:"Confirme la nueva contraseña",passwordsDoNotMatch:"Las contraseñas no coinciden",passwordTooShort:"La contraseña debe tener al menos 6 caracteres",changing:"Cambiando...",success:"Contraseña cambiada correctamente",failed:"Error al cambiar la contraseña"},plateAlert:{title:"¡Impresión en pausa!",message:"Se han detectado objetos en la cama de impresión. La impresión se ha pausado automáticamente. Despeje la cama y reanude la impresión.",understand:"Entendido"},camera:{title:"Vista de la cámara",invalidPrinterId:"ID de impresora no válido",live:"En directo",snapshot:"Captura",restartStream:"Reiniciar la transmisión",refreshSnapshot:"Actualizar la captura",fullscreen:"Pantalla completa",exitFullscreen:"Salir de la pantalla completa",connectingToCamera:"Conectando con la cámara...",capturingSnapshot:"Capturando imagen...",connectionLost:"Conexión perdida",connectionFailed:"Error de conexión con la cámara",reconnecting:"Reconectando en {{countdown}} s... (intento {{attempt}}/{{max}})",reconnectNow:"Reconectar ahora",cameraUnavailable:"Cámara no disponible",cameraUnavailableDesc:"Asegúrese de que la impresora está encendida y conectada.",noCamera:"No hay cámara disponible",retry:"Reintentar",cameraStream:"Transmisión de la cámara",zoomOut:"Alejar",zoomIn:"Acercar",resetZoom:"Restablecer el zoom",recording:"Grabando",startRecording:"Iniciar grabación",stopRecording:"Detener grabación",chamberLight:"Conmutar la luz de la cámara",unavailable:"Cámara no disponible",diagnose:{button:"Diagnosticar",modalTitle:"Diagnóstico de la cámara",running:"Ejecutando el diagnóstico...",runFailed:"No se pudo ejecutar el diagnóstico: {{error}}",retry:"Ejecutar de nuevo",stage:{tcp_reachable:"Accesibilidad de la red",first_frame:"Captura de fotogramas",live_stream_active:"Transmisión en directo activa"},summary:{all_ok:"La cámara funciona. El diagnóstico completó todas las etapas correctamente.",live_stream_active_healthy:"La cámara está transmitiendo actualmente con fotogramas recientes — no se necesita ninguna prueba.",printer_unreachable:"La impresora no es accesible. Compruebe la dirección IP, la conexión de red y que la impresora está encendida.",camera_port_closed:"La impresora es accesible pero el puerto de la cámara está cerrado. Asegúrese de que el modo solo LAN y el modo desarrollador están activados en los ajustes de la impresora.",no_frame:"Se conectó a la cámara pero no se recibieron fotogramas. Inténtelo de nuevo o compruebe que la cámara está activada en los ajustes de la impresora.",unknown_failure:"El diagnóstico de la cámara falló por un motivo desconocido. Consulte el registro de soporte para más detalles."},meta:{protocol:"Protocolo",port:"Puerto",profile:"Perfil"}}},groups:{title:"Gestión de grupos",subtitle:"Gestione los grupos de permisos para el control de acceso",backToSettings:"Volver a Ajustes",createGroup:"Crear grupo",noPermission:"No tiene permiso para acceder a esta página.",system:"Sistema",noDescription:"Sin descripción",usersCount:"{{count}} usuarios",permissionsCount:"{{count}} permisos",edit:"Editar",delete:"Eliminar",toast:{created:"Grupo creado correctamente",updated:"Grupo actualizado correctamente",deleted:"Grupo eliminado correctamente",enterGroupName:"Introduzca un nombre de grupo"},modal:{editGroup:"Editar grupo",createGroup:"Crear grupo",cancel:"Cancelar",saving:"Guardando...",creating:"Creando...",saveChanges:"Guardar cambios"},form:{groupName:"Nombre del grupo",groupNamePlaceholder:"Introduzca el nombre del grupo",systemGroupWarning:"Los nombres de los grupos del sistema no se pueden cambiar",description:"Descripción",descriptionPlaceholder:"Introduzca una descripción (opcional)",permissions:"Permisos ({{count}} seleccionados)"},deleteModal:{title:"Eliminar grupo",message:"¿Está seguro de que desea eliminar este grupo? Los usuarios de este grupo perderán estos permisos.",confirm:"Eliminar grupo"},editor:{title:"Editar grupo",createTitle:"Crear grupo",search:"Buscar permisos...",selectAll:"Seleccionar todo",clearAll:"Borrar todo",permissionsSelected:"{{count}} seleccionados",noResults:"Ningún permiso coincide con su búsqueda"}},users:{title:"Gestión de usuarios",subtitle:"Gestione los usuarios y su acceso a su instancia de Bambuddy",backToSettings:"Volver a Ajustes",createUser:"Crear usuario",noPermission:"No tiene permiso para acceder a esta página.",admin:"Administrador",noGroups:"Sin grupos",active:"Activo",inactive:"Inactivo",edit:"Editar",delete:"Eliminar",system:"Sistema",noGroupsAvailable:"No hay grupos disponibles",table:{username:"Nombre de usuario",groups:"Grupos",status:"Estado",actions:"Acciones"},toast:{created:"Usuario creado correctamente",updated:"Usuario actualizado correctamente",deleted:"Usuario eliminado correctamente",fillRequired:"Rellene todos los campos obligatorios",passwordsDoNotMatch:"Las contraseñas no coinciden",passwordTooShort:"La contraseña debe tener al menos 6 caracteres",ldapProvisioned:'Usuario LDAP "{{username}}" aprovisionado'},modal:{createUser:"Crear usuario",editUser:"Editar usuario",cancel:"Cancelar",creating:"Creando...",saving:"Guardando...",saveChanges:"Guardar cambios",advancedAuthSubtitle:"con autenticación avanzada",tabsAriaLabel:"Origen del usuario",localTab:"Local",ldapTab:"LDAP",ldapSearchLabel:"Buscar en el directorio",ldapSearchPlaceholder:"Escriba un nombre de usuario, nombre o correo...",ldapMinChars:"Escriba al menos 2 caracteres para buscar",ldapTypeToSearch:"Empiece a escribir para buscar en el directorio LDAP",ldapSearching:"Buscando en el directorio...",ldapNoResults:"No hay usuarios coincidentes en el directorio",ldapSearchError:"Error en la búsqueda en el directorio. Compruebe el estado del servidor LDAP.",ldapAlreadyProvisioned:"Ya aprovisionado",ldapSelectedLabel:"Seleccionado",ldapProvision:"Aprovisionar usuario",ldapProvisioning:"Aprovisionando...",ldapErrorProvision:"Error en el aprovisionamiento. Compruebe el estado del servidor LDAP e inténtelo de nuevo."},form:{username:"Nombre de usuario",usernamePlaceholder:"Introduzca el nombre de usuario",email:"Correo",emailPlaceholder:"usuario@ejemplo.com",password:"Contraseña",passwordPlaceholder:"Introduzca la contraseña",confirmPassword:"Confirmar contraseña",confirmPasswordPlaceholder:"Confirme la contraseña",newPasswordPlaceholder:"Introduzca la nueva contraseña",confirmNewPasswordPlaceholder:"Confirme la nueva contraseña",leaveBlankToKeep:"dejar en blanco para conservar la actual",groups:"Grupos",optional:"opcional",autoGeneratedPassword:"Se generará automáticamente una contraseña segura y se enviará al usuario por correo.",passwordManagedByAdvancedAuth:"La contraseña la gestiona la autenticación avanzada. Use «Restablecer contraseña» para enviar una nueva contraseña al usuario por correo.",resetPassword:"Restablecer contraseña",resettingPassword:"Restableciendo la contraseña..."},deleteModal:{title:"Eliminar usuario",message:"¿Está seguro de que desea eliminar este usuario? Esta acción no se puede deshacer.",confirm:"Eliminar usuario"}},streamOverlay:{title:"Superposición de transmisión",invalidPrinterId:"ID de impresora no válido",cameraStream:"Transmisión de la cámara",progress:"Progreso",eta:"Tiempo estimado",printerIdle:"La impresora está inactiva",printerOffline:"Impresora desconectada",status:{printing:"Imprimiendo",paused:"En pausa",finished:"Finalizada",failed:"Fallida",idle:"Inactiva",unknown:"Desconocido"}},profiles:{title:"Perfiles",subtitle:"Gestione sus preajustes del laminador y las calibraciones de avance de presión",tabs:{bambuCloud:"Bambu Cloud",orcaCloud:"Orca Cloud",local:"Perfiles locales",kprofiles:"Perfiles K"},orcaCloud:{connectedAs:"Conectado como",logout:"Desconectar",noLogoutPermission:"No tienes permiso para desconectar",noConnectPermission:"No tienes permiso para conectar a Orca Cloud",retry:"Reintentar",back:"Usar otro método de inicio de sesión",connect:{title:"Conectar a Orca Cloud",description:"Inicia sesión en tu cuenta Orca Cloud para sincronizar tus perfiles de slicer en Bambuddy."},providers:{google:"Iniciar sesión con Google",apple:"Iniciar sesión con Apple",github:"Iniciar sesión con GitHub",email:"Iniciar sesión con correo y contraseña"},password:{title:"Iniciar sesión con correo y contraseña",email:"Correo electrónico",emailPlaceholder:"tu@ejemplo.com",password:"Contraseña",submit:"Iniciar sesión"},paste:{title:"Finalizar inicio de sesión",step1:"Se abrió una nueva pestaña con la página de inicio de sesión de Orca Cloud. Inicia sesión con tu cuenta de Orca.",step2:'Tu navegador será redirigido a una URL "localhost" que no se cargará. Es lo esperado — esa URL es lo que necesitamos.',step3:"Copia la URL completa desde la barra de direcciones del navegador y pégala abajo.",signInUrl:"Si la pestaña de inicio de sesión no se abrió, haz clic en esta URL:",label:"Pega aquí la URL de callback",placeholder:"http://localhost:41172/callback?code=...&state=...",submit:"Finalizar conexión"},profiles:{title:"Tus perfiles de Orca Cloud ({{count}})",refresh:"Actualizar",empty:"Aún no hay perfiles en tu cuenta de Orca Cloud."},toast:{connected:"Conectado a Orca Cloud como {{email}}",disconnected:"Desconectado de Orca Cloud"},errors:{startFailed:"No se pudo iniciar el inicio de sesión de Orca Cloud.",finishFailed:"No se pudo finalizar el inicio de sesión de Orca Cloud.",passwordFailed:"No se pudo iniciar sesión con ese correo y contraseña.",passwordEmpty:"Por favor introduce tanto tu correo como tu contraseña.",emptyPaste:"Pega la URL de callback desde tu navegador.",noCode:"Esa URL no parece un callback de Orca Cloud (sin parámetro code). Copia la URL completa desde la barra de direcciones."}},localProfiles:{title:"Perfiles locales",subtitle:"Importe y gestione preajustes del laminador desde OrcaSlicer",import:"Importar perfiles",importDesc:"Suelte aquí archivos .bbscfg, .bbsflmt, .orca_filament, .zip o .json",importing:"Importando...",search:"Buscar preajustes locales...",noPresets:"Aún no hay preajustes locales",noSearchResults:"Ningún preajuste coincide con su búsqueda",badge:"Local",edit:"Editar",delete:"Eliminar",cancel:"Cancelar",deleteConfirmTitle:"Eliminar preajuste",deleteConfirm:"¿Está seguro de que desea eliminar este preajuste? Esto no se puede deshacer.",source:"Origen",inheritsFrom:"Hereda de",filamentType:"Tipo",vendor:"Proveedor",compatiblePrinters:"Impresoras",nozzleTemp:"Temp. de la boquilla",cost:"Coste",density:"Densidad",pressureAdvance:"Avance de presión",filament:"Filamento",process:"Proceso",printer:"Impresora",toast:{importSuccess:"{{count}} preajuste(s) importado(s)",importSkipped:"{{count}} preajuste(s) omitido(s) (duplicados)",importError:"{{count}} error(es) durante la importación",deleted:"Preajuste eliminado",updated:"Preajuste actualizado"}},connectedAs:"Conectado como",logout:"Cerrar sesión",noLogoutPermission:"No tiene permiso para cerrar sesión",failedToLoad:"Error al cargar los perfiles",retry:"Reintentar",time:{justNow:"Ahora mismo",minsAgo:"hace {{count}} min",hoursAgo:"hace {{count}} h",daysAgo:"hace {{count}} d"},toast:{loggedOut:"Sesión cerrada"},login:{title:"Conectarse a Bambu Cloud",subtitle:"Sincronice sus preajustes del laminador entre dispositivos",email:"Correo",password:"Contraseña",region:"Región",regionGlobal:"Global",regionChina:"China",verificationCode:"Código de verificación",totpCode:"Código del autenticador",checkEmail:"Compruebe su correo ({{email}}) en busca de un código de 6 dígitos",enterTotpHint:"Introduzca el código de 6 dígitos de su aplicación de autenticación",accessToken:"Token de acceso",accessTokenHint:"Pegue su token de acceso de Bambu Cloud. Las cuentas de la región de China deben usar esta vía (vinculada al teléfono — inicio de sesión por correo no disponible). Consulte la wiki para saber cómo obtener el token de las cookies de MakerWorld.",back:"Atrás",loginButton:"Iniciar sesión",verifyButton:"Verificar",setTokenButton:"Establecer token",useToken:"Usar token de acceso en su lugar",useEmail:"Iniciar sesión con correo en su lugar",toast:{loggedIn:"Sesión iniciada correctamente",codeSent:"Código de verificación enviado a su correo",enterTotp:"Introduzca el código de su aplicación de autenticación",tokenSet:"Token establecido correctamente"}},presets:{myPreset:"Mi preajuste (editable)",duplicate:"Duplicar",editable:"Editable",failedToLoadDetails:"Error al cargar los detalles del preajuste",deleteConfirm:"¿Eliminar este preajuste?",deleteWarning:'Esto eliminará permanentemente "{{name}}" de Bambu Cloud. Esto no se puede deshacer.',noDuplicatePermission:"No tiene permiso para duplicar preajustes",noEditPermission:"No tiene permiso para editar preajustes",noDeletePermission:"No tiene permiso para eliminar preajustes",types:{filament:"Preajuste de filamento",printer:"Preajuste de impresora",process:"Preajuste de proceso"},toast:{deleted:"Preajuste eliminado",created:"Preajuste creado",updated:"Preajuste actualizado",duplicated:"Preajuste duplicado",fieldAdded:'Campo "{{key}}" añadido',exported:"Preajuste exportado"},baseLabel:"Base: {{name}}",currentLabel:"Actual: {{name}}",newPreset:"Nuevo preajuste",editPreset:"Editar preajuste",duplicatePreset:"Duplicar preajuste",createNewPreset:"Crear nuevo preajuste",customizeSettings:"Personalice los ajustes de su nuevo preajuste",compareWithBase:"Comparar con el preajuste base",compare:"Comparar",basePreset:"Preajuste base",selectBasePreset:"Seleccionar preajuste base...",presetName:"Nombre del preajuste",myCustomPreset:"Mi preajuste personalizado",inheritsFrom:"Hereda de",dropJsonToImport:"Suelte un JSON para importar",tabs:{common:"Común",allFields:"Todos los campos"},availableFields:"Campos disponibles",searchFieldsPlaceholder:"Buscar campos...",noMatchingFields:"No hay campos coincidentes",allFieldsAdded:"Todos los campos añadidos",addCustomField:"Añadir campo personalizado",yourOverrides:"Sus anulaciones",noOverridesYet:"Aún no hay anulaciones",clickFieldsToAdd:"Haga clic en los campos de la izquierda para añadirlos",saveAsTemplate:"Guardar como plantilla",jsonTip:"Consejo: arrastre y suelte un archivo .json en cualquier parte de esta ventana para importar ajustes"},cloudView:{searchPlaceholder:"Buscar preajustes...",templates:"Plantillas",refresh:"Actualizar",newPreset:"Nuevo preajuste",clearFilters:"Borrar filtros",compareMode:"Modo de comparación",selectAnotherPreset:"Seleccione otro preajuste de {{type}}",clickTwoPresets:"Haga clic en dos preajustes del mismo tipo para compararlos",selectFirst:"1. Seleccione el primero",selectSecond:"2. Seleccione el segundo",compareNow:"Comparar ahora",lastSynced:"Última sincronización:",showingCount:"Mostrando {{showing}} de {{total}} preajustes",noPresetsFound:"No se encontraron preajustes",columns:{filament:"Filamento",process:"Proceso",printer:"Impresora"},noFilamentPresets:"No hay preajustes de filamento",noProcessPresets:"No hay preajustes de proceso",noPrinterPresets:"No hay preajustes de impresora",filters:{type:"Tipo",owner:"Propietario",printer:"Impresora",nozzle:"Boquilla",filament:"Filamento",layer:"Capa",all:"Todos",myPresets:"Mis preajustes",builtIn:"Integrados",process:"Proceso"},noTemplatesPermission:"No tiene permiso para gestionar plantillas",noRefreshPermission:"No tiene permiso para actualizar perfiles",noCreatePermission:"No tiene permiso para crear preajustes"},templates:{title:"Plantillas rápidas",noTemplates:"Aún no hay plantillas",createFirst:"Cree plantillas desde el editor de preajustes",typeFilter:"Tipo:",deleteTitle:"Eliminar plantilla",deleteWarning:"Esta acción no se puede deshacer",deleteConfirm:'¿Está seguro de que desea eliminar "{{name}}"?',namePlaceholder:"Nombre de la plantilla",descriptionPlaceholder:"Descripción",settingsJson:"Ajustes (JSON)",fieldsCount:"{{count}} campos",shownInModals:"Mostrada en las ventanas",hiddenInModals:"Oculta en las ventanas",apply:"Aplicar",toast:{deleted:"Plantilla eliminada",updated:"Plantilla actualizada",created:"Plantilla creada",applied:"Plantilla aplicada"}}},support:{debugLoggingActive:"El registro de depuración está activo",manageLogs:"Gestionar",collectItem7:"Conectividad de la impresora y versiones de firmware",collectItem8:"Estado de las integraciones (Spoolman, MQTT, HA)",collectItem9:"Interfaces de red (solo subredes)",collectItem10:"Versiones de los paquetes de Python",collectItem11:"Comprobaciones de estado de la base de datos",collectItem12:"Detalles del entorno de Docker",bundleGenerating:"Generando paquete...",bundleStepConnection:"Ejecutando comprobaciones de conectividad de impresoras",bundleStepVirtualPrinters:"Ejecutando comprobaciones de configuración de impresoras virtuales",bundleStepLogScan:"Analizando los registros recientes en busca de problemas conocidos",bundleStepBuild:"Creando el archivo ZIP del paquete de soporte"},fileManager:{title:"Gestor de archivos",subtitle:"Organice y gestione sus archivos de impresión",uploadFiles:"Subir archivos",newFolder:"Nueva carpeta",folderName:"Nombre de la carpeta",folderNamePlaceholder:"p. ej., Piezas funcionales",renameFile:"Renombrar archivo",renameFolder:"Renombrar carpeta",invalidFilenameChar:'El carácter "{{char}}" no está permitido en nombres de archivos de impresión. La tarjeta SD de la impresora rechaza: < > : " / \\ | ? *',moveFiles:"Mover {{count}} archivo(s)",rootNoFolder:"Raíz (sin carpeta)",current:"actual",linkFolder:"Vincular carpeta",linkFolderDescription:'Vincule "{{name}}" a un proyecto o archivo para un acceso rápido.',project:"Proyecto",archive:"Archivo",noProjectsFound:"No se encontraron proyectos",noArchivesFound:"No se encontraron archivos",unlink:"Desvincular",link:"Vincular",dragDropFiles:"Arrastre y suelte archivos aquí",dropFilesHere:"Suelte archivos aquí",orClickToBrowse:"o haga clic para examinar",allFileTypesSupported:"Se admiten todos los tipos de archivo. Los archivos ZIP se extraerán.",zipFilesDetected:"Archivos ZIP detectados",zipExtractOptions:"Los archivos ZIP se extraerán. Elija cómo gestionar la estructura de carpetas:",preserveZipStructure:"Conservar la estructura de carpetas del ZIP",createFolderFromZip:"Crear una carpeta a partir del nombre del archivo ZIP",stlThumbnailGeneration:"Generación de miniaturas STL",zipMayContainStl:"Los archivos ZIP pueden contener archivos STL. Se pueden generar miniaturas durante la extracción.",thumbnailsCanBeGenerated:"Se pueden generar miniaturas para los archivos STL. Los modelos grandes pueden tardar más en procesarse.",generateThumbnailsForStl:"Generar miniaturas para los archivos STL",threemfDetected:"Archivos 3MF detectados",threemfExtractionInfo:"El modelo de impresora, el material, el color y los ajustes de impresión se extraerán automáticamente de los archivos 3MF.",willBeExtracted:"Se extraerá",filesExtracted:"{{count}} archivos extraídos",uploadComplete:"Subida completada: {{succeeded}} con éxito",uploadFailed:"Error al subir",zipFilesFailed:"{{count}} archivos fallidos",uploading:"Subiendo...",changeLink:"Cambiar enlace...",linkTo:"Vincular a...",linkToProjectOrArchive:"Vincular a un proyecto o archivo",addToQueue:"Añadir a la cola",schedulePrint:"Programar",generateThumbnail:"Generar miniatura",generateThumbnails:"Generar miniaturas",generateThumbnailsForMissing:"Generar miniaturas para los archivos STL que no las tienen",gridView:"Vista de cuadrícula",listView:"Vista de lista",lowDiskSpaceWarning:"Advertencia de poco espacio en disco",lowDiskSpaceDetails:"Solo {{free}} libres de {{total}} en total. El umbral está establecido en {{threshold}} GB en los ajustes.",files:"Archivos",folders:"Carpetas",size:"Tamaño",free:"Libre",allFiles:"Todos los archivos",allExternal:"Externos",externalIsEmpty:"Sin archivos externos",externalEmptyDescription:"Los archivos de tus carpetas externas vinculadas aparecerán aquí.",wrap:"Ajustar",enableTextWrapping:"Activar el ajuste de texto",disableTextWrapping:"Desactivar el ajuste de texto",collapse:"Contraer",collapseFoldersByDefault:"Contraer las carpetas de forma predeterminada",expandFoldersByDefault:"Expandir las carpetas de forma predeterminada",dragToResizeTooltip:"Arrastre para redimensionar, doble clic para restablecer",searchFiles:"Buscar archivos...",allTypes:"Todos los tipos",prints:"Impresiones",ascending:"Ascendente",descending:"Descendente",resultsCount:"{{showing}} de {{total}} archivos",selectAll:"Seleccionar todo",deselectAll:"Deseleccionar todo",selected:"{{count}} seleccionados",adding:"Añadiendo...",loadingFiles:"Cargando archivos...",folderIsEmpty:"La carpeta está vacía",noFilesYet:"Aún no hay archivos",folderEmptyDescription:"Suba archivos o mueva archivos a esta carpeta para empezar.",noFilesDescription:"Suba archivos para empezar a organizar sus archivos relacionados con la impresión.",noMatchingFiles:"No hay archivos coincidentes",noMatchingFilesDescription:"Ningún archivo coincide con su búsqueda o los criterios de filtro actuales.",clearFilters:"Borrar filtros",printedCount:"Impreso {{count}} veces",uploadedBy:"Subido por",deleteFolder:"Eliminar carpeta",deleteFile:"Eliminar archivo",deleteFilesCount:"Eliminar {{count}} archivos",deleteFolderConfirm:"¿Está seguro de que desea eliminar esta carpeta? Todos los archivos que contiene también se eliminarán.",deleteFileConfirm:"¿Está seguro de que desea eliminar este archivo?",deleteFilesConfirm:"¿Está seguro de que desea eliminar {{count}} archivos seleccionados? Esta acción no se puede deshacer.",deleting:"Eliminando...",noPermissionRenameFolder:"No tiene permiso para renombrar carpetas",noPermissionLinkFolder:"No tiene permiso para vincular carpetas",noPermissionDeleteFolder:"No tiene permiso para eliminar carpetas",noPermissionPrint:"No tiene permiso para imprimir",noPermissionAddToQueue:"No tiene permiso para añadir a la cola",noPermissionSlice:"No tiene permiso para laminar archivos",noPermissionDownload:"No tiene permiso para descargar archivos",noPermissionRenameFile:"No tiene permiso para renombrar este archivo",noPermissionGenerateThumbnail:"No tiene permiso para generar miniaturas",noPermissionDeleteFile:"No tiene permiso para eliminar este archivo",noPermissionCreateFolder:"No tiene permiso para crear carpetas",noPermissionUpload:"No tiene permiso para subir archivos",noPermissionMoveFiles:"No tiene permiso para mover archivos",noPermissionDeleteFiles:"No tiene permiso para eliminar archivos",linkExternal:"Vincular externa",linkExternalFolder:"Vincular carpeta externa",linkExternalFolderDescription:"Monte un directorio del host (NAS, USB, recurso compartido de red) en el gestor de archivos. Los archivos no se copian — se accede a ellos directamente desde la ruta original.",externalFolderNamePlaceholder:"p. ej., Impresiones del NAS",externalPath:"Ruta del host",externalPathHelp:"Ruta absoluta al directorio en el host de Docker. Debe estar montado por enlace en el contenedor.",readOnly:"Solo lectura",readOnlyHelp:"impide las subidas y eliminaciones",showHiddenFiles:"Mostrar archivos ocultos (con punto)",externalFolder:"Carpeta externa",scanFolder:"Escanear",toast:{folderCreated:"Carpeta creada",folderDeleted:"Carpeta eliminada",fileDeleted:"Archivo eliminado",filesDeleted:"Se eliminaron {{count}} archivos",filesMoved:"Archivos movidos",folderLinked:"Carpeta vinculada",folderUnlinked:"Carpeta desvinculada",externalFolderLinked:"Carpeta externa vinculada y escaneada",folderScanned:"Escaneo completado: {{added}} añadidos, {{removed}} eliminados",addedToQueue:"Se añadieron {{count}} archivo(s) a la cola",addedToQueuePartial:"Se añadieron {{added}} archivo(s), {{failed}} fallidos",failedToAddToQueue:"Error al añadir los archivos: {{error}}",fileRenamed:"Archivo renombrado",folderRenamed:"Carpeta renombrada",thumbnailsGenerated:"Se generaron {{count}} miniatura(s)",thumbnailsGeneratedPartial:"Se generaron {{succeeded}} miniatura(s), {{failed}} fallidas",noStlMissingThumbnails:"No hay archivos STL sin miniaturas",failedToGenerateThumbnails:"Error al generar las miniaturas: {{error}}",thumbnailGenerated:"Miniatura generada",failedToGenerateThumbnail:"Error al generar la miniatura: {{error}}"}},projects:{title:"Proyectos",subtitle:"Organice y haga el seguimiento de sus proyectos de impresión 3D",newProject:"Nuevo proyecto",editProject:"Editar proyecto",deleteProject:"Eliminar proyecto",projectName:"Nombre del proyecto",description:"Descripción",noProjects:"Aún no hay proyectos",noProjectsFiltered:"No hay proyectos {{status}}",noProjectsFilteredHelp:"No tiene ningún proyecto {{status}}. Los proyectos aparecerán aquí cuando cambie su estado.",createFirst:"Cree su primer proyecto para empezar a organizar impresiones relacionadas, hacer el seguimiento del progreso y gestionar sus construcciones.",createFirstButton:"Cree su primer proyecto",create:"Crear",files:"Archivos",prints:"Impresiones",plates:"camas",parts:"piezas",lastModified:"Última modificación",deleteConfirm:"¿Está seguro de que desea eliminar este proyecto? Los archivos y los elementos de la cola se desvincularán pero no se eliminarán.",addFiles:"Añadir archivos",removeFile:"Quitar archivo",viewDetails:"Ver detalles",namePlaceholder:"p. ej., Construcción de Voron 2.4",descriptionPlaceholder:"Descripción opcional...",urlLabel:"URL",urlPlaceholder:"https://makerworld.com/...",urlInvalid:"La URL debe empezar por http:// o https://",openExternalUrl:"Abrir la URL del proyecto",coverImageLabel:"Foto de portada",coverImageAlt:"Foto de portada del proyecto",coverImageUpload:"Subir",coverImageReplace:"Reemplazar",coverImageRemove:"Quitar",color:"Color",targetPlates:"Camas objetivo",targetPlatesPlaceholder:"p. ej., 25",targetPlatesHelp:"Número de trabajos de impresión",targetParts:"Piezas objetivo",targetPartsPlaceholder:"p. ej., 150",targetPartsHelp:"Total de objetos necesarios",tagsLabel:"Etiquetas (separadas por comas)",tagsPlaceholder:"p. ej., voron, funcional, regalo",dueDate:"Fecha límite",priority:"Prioridad",priorityLow:"Baja",priorityNormal:"Normal",priorityHigh:"Alta",priorityUrgent:"Urgente",statusActive:"Activo",statusCompleted:"Completado",statusArchived:"Archivado",done:"Hecho",completed:"completadas",failed:"fallidas",inQueue:"en cola",noPrintsYet:"Aún no hay impresiones",printJobs:"Trabajos de impresión (camas)",partsPrinted:"Piezas impresas",failedParts:"Piezas fallidas",import:"Importar",export:"Exportar",importProject:"Importar proyecto",exportAll:"Exportar todos los proyectos",loading:"Cargando proyectos...",noEditPermission:"No tiene permiso para editar proyectos",noDeletePermission:"No tiene permiso para eliminar proyectos",noCreatePermission:"No tiene permiso para crear proyectos",noImportPermission:"No tiene permiso para importar proyectos",noExportPermission:"No tiene permiso para exportar proyectos",toast:{created:"Proyecto creado",updated:"Proyecto actualizado",deleted:"Proyecto eliminado",imported:"Proyecto importado",multipleImported:"{{count}} proyectos importados",importFailed:"Error en la importación",exported:"Proyectos exportados (solo metadatos)"}},projectDetail:{notFound:"Proyecto no encontrado",backToProjects:"Volver a Proyectos",export:"Exportar",exportProject:"Exportar proyecto",noExportPermission:"No tiene permiso para exportar proyectos",noEditPermission:"No tiene permiso para editar proyectos",partOf:"Parte de:",priorityLabel:"Prioridad:",noPrints:"Aún no hay impresiones en este proyecto",status:{active:"Activo",completed:"Completado",archived:"Archivado"},priority:{low:"Baja",normal:"Normal",high:"Alta",urgent:"Urgente"},dueDate:{overdue:"Atrasado",today:"Vence hoy",daysLeft:"Quedan {{count}} días"},progress:{platesProgress:"Progreso de camas",partsProgress:"Progreso de piezas",printJobs:"trabajos de impresión",parts:"piezas",percentComplete:"{{percent}}% completado",remaining:"{{count}} restantes"},stats:{printJobs:"Trabajos de impresión",total:"total",failed:"{{count}} fallidos",partsPrinted:"{{count}} piezas impresas",printTime:"Tiempo de impresión",filamentUsed:"Filamento usado"},cost:{title:"Seguimiento de costes",filamentCost:"Coste del filamento",energy:"Energía",totalCost:"Coste total",total:"Total",includesBom:"incl. lista de materiales",budget:"Presupuesto",remaining:"Restante"},subProjects:{title:"Subproyectos ({{count}})"},notes:{title:"Notas",noEditPermission:"No tiene permiso para editar notas",placeholder:"Añada notas sobre este proyecto...",empty:"Aún no hay notas. Haga clic en Editar para añadir notas."},files:{title:"Archivos",linkFolders:"Vincule carpetas del gestor de archivos",forQuickAccess:"a este proyecto para un acceso rápido.",fileCount:"{{count}} archivo(s)",empty:"No hay carpetas vinculadas. Vaya al gestor de archivos y vincule una carpeta a este proyecto.",noFiles:"No hay archivos en esta carpeta.",print:"Imprimir ahora",addToQueue:"Añadir a la cola"},bom:{title:"Lista de materiales",acquired:"{{completed}}/{{total}} adquiridos",showAll:"Mostrar todo",hideDone:"Ocultar los hechos",addPart:"Añadir pieza",noAddPermission:"No tiene permiso para añadir piezas",partNamePlaceholder:"Nombre de la pieza (p. ej., tornillos M3x8)",partName:"Nombre de la pieza",qty:"Cant.",price:"Precio ({{currency}})",sourcingUrlPlaceholder:"URL de aprovisionamiento (opcional)",remarksPlaceholder:"Observaciones (opcional)",deletePart:"Eliminar pieza",deleteConfirm:'¿Está seguro de que desea eliminar "{{name}}"?',noUpdatePermission:"No tiene permiso para actualizar piezas",noEditPermission:"No tiene permiso para editar piezas",noDeletePermission:"No tiene permiso para eliminar piezas",totalCost:"Coste total:",empty:"No hay piezas en la lista de materiales. Añada hardware, componentes electrónicos u otros componentes para hacer el seguimiento de lo que hay que aprovisionar."},timeline:{title:"Cronología de actividad",empty:"Aún no hay actividad."},template:{saveAsTemplate:"Guardar como plantilla",noCreatePermission:"No tiene permiso para crear plantillas"},queue:{title:"Cola",viewAll:"Ver todo",printing:"{{count}} imprimiendo",queued:"{{count}} en cola"},prints:{title:"Impresiones ({{count}})"},toast:{projectUpdated:"Proyecto actualizado",partAdded:"Pieza añadida",partRemoved:"Pieza eliminada",exportFailed:"Error en la exportación",projectExported:"Proyecto exportado",templateCreated:"Plantilla creada"}},system:{title:"Información del sistema",version:"Versión",uptime:"Tiempo de actividad",cpuUsage:"Uso de la CPU",memoryUsage:"Uso de la memoria",diskUsage:"Uso del disco",networkInfo:"Información de la red",logs:"Registros",debugMode:"Modo de depuración",enableDebug:"Activar el registro de depuración",disableDebug:"Desactivar el registro de depuración",downloadLogs:"Descargar registros",clearLogs:"Borrar registros",dockerInfo:"Información de Docker",containerName:"Nombre del contenedor",imageName:"Nombre de la imagen",platform:"Plataforma",architecture:"Arquitectura"},library:{title:"Biblioteca de filamentos",addFilament:"Añadir filamento",editFilament:"Editar filamento",deleteFilament:"Eliminar filamento",vendor:"Proveedor",material:"Material",color:"Color",kFactor:"Factor K",temperature:"Temperatura",noFilaments:"No hay filamentos en la biblioteca",deleteConfirm:"¿Está seguro de que desea eliminar este filamento?",importFromPrinter:"Importar desde la impresora",exportToFile:"Exportar a un archivo"},slice:{title:"Laminar modelo",action:"Laminar",actionAll:"Laminar las {{count}} bandejas",actionAllTitle:"Laminar todas las bandejas en una salida única de varias bandejas (un solo archivo). La selección de filamento cubre cada hueco que defina el proyecto.",allPlatesToggle:"Laminar las {{count}} bandejas",slicing:"Laminando…",printer:"Perfil de impresora",process:"Perfil de proceso",filament:"Perfil de filamento",filamentSlot:"Filamento {{index}} ({{type}})",selectPreset:"— Seleccione un preajuste —",loadingPresets:"Cargando preajustes…",analyzingPlateFilaments:"Analizando los filamentos de la cama…",analyzingPlateFilamentsHint:"Ejecutando un laminado de vista previa para descubrir qué ranuras del AMS usa esta cama. Después se almacena en caché — volver a abrir es instantáneo.",previewToast:"Analizando {{name}} — {{elapsed}}",previewWithProgress:"Analizando {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",notUsedByPlate:"— no usado por esta cama",noPresetsForSlot:"No hay preajustes disponibles",otherPrinters:"Otras impresoras",presetsLoadFailed:"Error al cargar los preajustes. Abra Ajustes → Perfiles para importarlos primero.",refreshPresets:"Actualizar",refreshPresetsTitle:"Actualizar preajustes — recuperar los listados más recientes de la nube y los paquetes (úselo tras eliminar un preajuste en Bambu Studio o Bambu Handy)",allPresetsRequired:"Deben seleccionarse todos los preajustes",bundle:"Paquete del laminador",bundleNone:"— Ninguno (elegir preajustes individualmente) —",bundleAllRequired:"Deben elegirse el proceso del paquete y todas las ranuras de filamento",enqueuing:"Enviando el trabajo de laminado…",queued:"En cola…",failed:"Error al laminar. Consulte los registros del contenedor auxiliar del laminador.",startedToast:"Laminando {{name}} en segundo plano…",queuedToast:"En cola: {{name}} — {{elapsed}}",runningToast:"Laminando {{name}} — {{elapsed}}",runningWithProgress:"{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",runningWithProgressMultiPlate:"Bandeja {{plateIndex}} de {{plateCount}} • {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",completedToast:"{{name}} laminado",failedTitle:"Error al laminar",failedToast:"Error al laminar {{name}}: {{detail}}",tier:{local:"Importado",cloud:"Bambu Cloud",orcaCloud:"Orca Cloud",standard:"Estándar"},cloud:{notAuthenticated:"Inicie sesión en Bambu Cloud (Ajustes → Perfiles → Bambu Cloud) para ver sus preajustes de la nube.",expired:"La sesión de Bambu Cloud ha caducado — inicie sesión de nuevo para actualizar sus preajustes de la nube.",unreachable:"Bambu Cloud no es accesible en este momento. Los preajustes locales y estándar siguen funcionando."},orcaCloud:{notAuthenticated:"Inicia sesión en Orca Cloud (Perfiles → Orca Cloud) para ver tus preajustes Orca.",expired:"Sesión de Orca Cloud caducada — inicia sesión de nuevo para actualizar tus preajustes Orca.",unreachable:"Orca Cloud no está disponible ahora. Otros preajustes siguen funcionando."},bedType:{label:"Cama de impresión",auto:"Automático (usar el preajuste de proceso)",coolPlate:"Cool Plate",coolPlateSuperTack:"Cool Plate SuperTack",engineering:"Engineering Plate",highTemp:"High Temp Plate",texturedPEI:"Textured PEI Plate",smoothPEI:"Smooth PEI Plate"}},spoolman:{title:"Integración con Spoolman",enabled:"Spoolman activado",url:"URL de Spoolman",connected:"Conectado",disconnected:"No conectado",testConnection:"Probar conexión",sync:"Sincronizar",syncing:"Sincronizando...",lastSync:"Última sincronización",linkToSpoolman:"Vincular a Spoolman",openInSpoolman:"Abrir en Spoolman",unlinkSpool:"Desvincular bobina",unlinkConfirmTitle:"¿Desasignar la bobina?",unlinkConfirmMessage:"Esto quitará la bobina de esta ranura. Los datos de la bobina en sí permanecerán sin cambios.",selectSpool:"Seleccionar bobina",noUnlinkedSpools:"No hay bobinas sin asignar disponibles",linkSuccess:"Bobina asignada correctamente",linkFailed:"Error al asignar la bobina",unlinkSuccess:"Bobina desasignada correctamente",unlinkFailed:"Error al desasignar la bobina",linkedSpool:"Bobina asignada",spoolId:"ID de la bobina",fillSourceLabel:"(Spoolman)",weight:"Peso",remaining:"Restante",disableWeightSync:"Desactivar la sincronización del peso estimado del AMS",disableWeightSyncDesc:"No actualizar la capacidad restante a partir de las estimaciones del AMS. Use esto si prefiere el seguimiento del uso de Spoolman a las estimaciones del AMS basadas en porcentajes. Las bobinas nuevas seguirán usando la estimación del AMS como su peso inicial.",reportPartialUsage:"Informar del uso parcial en las impresiones fallidas",reportPartialUsageDesc:"Cuando una impresión falla o se cancela, informar del filamento estimado usado hasta ese punto según el progreso de las capas."},inventory:{title:"Inventario de bobinas",subtitle:"Gestione sus bobinas",spoolmanMixedContentTitle:"Spoolman no se puede cargar por HTTPS — contenido mixto bloqueado por su navegador",spoolmanMixedContentBody:"Bambuddy se sirve por HTTPS (mediante su proxy inverso), pero su URL de Spoolman sigue siendo HTTP sin cifrar. Los navegadores bloquean el contenido mixto por seguridad, por lo que la interfaz integrada de Spoolman no se puede mostrar. Spoolman debe ser accesible por HTTPS para que esto funcione.",spoolmanMixedContentFixReverseProxy:"Ponga Spoolman tras el mismo proxy inverso que Bambuddy (Traefik / Nginx / Caddy) con HTTPS y luego actualice la URL de Spoolman en Ajustes a la nueva dirección HTTPS.",spoolmanMixedContentFixOpenNewTab:"Como solución alternativa, abra Spoolman en una pestaña nueva del navegador por HTTP — las reglas de contenido mixto solo se aplican a los marcos integrados, por lo que una pestaña independiente sí funciona.",spoolmanOpenInNewTab:"Abrir Spoolman en una pestaña nueva",labels:{title:"Imprimir etiquetas de bobinas",selectedCount:"{{count}} seleccionadas",pickSpools:"Elija para qué bobinas imprimir etiquetas:",searchPlaceholder:"Buscar nombre, marca o n.º de ID",filterByMaterial:"Material:",allMaterials:"Todos",selectVisible:"Seleccionar todas las visibles ({{count}})",deselectVisible:"Deseleccionar las visibles",clearAll:"Borrar todo",noSpoolsToShow:"No hay bobinas que mostrar. Ajuste su filtro e inténtelo de nuevo.",noMatches:"Ninguna bobina coincide con la búsqueda o el filtro actuales.",printOne:"Imprimir etiqueta para esta bobina",printLabels:"Imprimir etiquetas…",bulkTitle:"Elija las bobinas para las que imprimir etiquetas de las {{count}} mostradas actualmente",noSpoolsTitle:"No hay bobinas que etiquetar",error:"No se pudieron generar las etiquetas: {{msg}}",sortBy:{label:"Ordenar:",id:"Por ID",color:"Por color"},templates:{amsHolderSmall:{label:"Soporte de AMS — pequeño (74 × 33 mm)",hint:"Una etiqueta por página; coincide con la etiqueta imprimible del modelo 752566 de MakerWorld (AMS Filament Label Holder)."},amsHolderLarge:{label:"Soporte de AMS — grande (75 × 55 mm)",hint:"Una etiqueta por página; encaja en la variante con inserto de cartulina del AMS Filament Label Holder. Lo bastante amplia para muestra de color, marca, material, ID y código QR."},box40x30:{label:"Etiqueta de caja (40 × 30 mm)",hint:"Una etiqueta por página; tamaño de rollo DK/Brother habitual, adecuado para etiquetas de bolsas de filamento y cajas de almacenamiento."},box:{label:"Box label (62 × 29 mm)",hint:"Una etiqueta por página; dimensionada para las etiquetas pequeñas de Brother PT/QL y Dymo."},averyL7160:{label:"Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)",hint:"Hojas de tamaño UE; 21 etiquetas por página A4."},avery5160:{label:"Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)",hint:"Hojas de tamaño EE. UU.; 30 etiquetas por página Letter."}}},addSpool:"Añadir bobina",editSpool:"Editar bobina",copySpool:"Copiar bobina",material:"Material",selectMaterial:"Seleccionar material...",subtype:"Subtipo",brand:"Marca",searchBrand:"Buscar marca...",useCustomBrand:'Usar "{{brand}}"',useCustomMaterial:"Usar material personalizado: {{material}}",colorName:"Nombre del color",colorNamePlaceholder:"Blanco jade, Rojo fuego...",color:"Color",hexColor:"Color hexadecimal",pickColor:"Elegir color personalizado",labelWeight:"Peso de la etiqueta",coreWeight:"Peso de la bobina vacía",searchSpoolWeight:"Buscar peso de la bobina...",weightUsed:"Usado",currentWeight:"Peso restante",measuredWeight:"Peso medido",spoolName:"Bobina",costPerKg:"Coste por kg",storageLocation:"Ubicación de almacenamiento",storageLocationPlaceholder:"p. ej. Estante A, Cajón 1",openInInventory:"Abrir en el inventario",measuredWeightError:"El peso medido debe estar entre {{min}} g y {{max}} g.",slicerFilament:"Filamento del laminador",slicerFilamentName:"Nombre del preajuste del laminador",slicerPreset:"Preajuste del laminador",searchPresets:"Buscar preajustes de filamento...",selectedPreset:"Seleccionado",noPresetsFound:"No se encontraron preajustes",tempOverrides:"Anulaciones de temperatura",note:"Nota",notePlaceholder:"Cualquier nota adicional sobre esta bobina...",category:"Categoría",categoryPlaceholder:"p. ej. Producción, Prototipo, Cliente A",categoryNone:"Sin categoría",storageLocationNone:"Sin ubicación establecida",lowStockThresholdOverride:"Umbral de existencias bajas (esta bobina)",lowStockThresholdOverrideHelp:"Déjelo en blanco para usar el umbral global ({{global}}%).",clearRfid:"Borrar etiqueta RFID",rfidCleared:"Etiqueta RFID borrada",archive:"Archivar",restore:"Restaurar",noSpools:"Aún no hay bobinas. Añada su primera bobina para empezar.",noAvailableSpools:"No hay bobinas disponibles. Añada una bobina a su inventario o desasigne una de otra ranura primero.",kProfiles:"Perfiles K",addKProfile:"Añadir perfil K",assignSpool:"Asignar bobina",unassignSpool:"Desasignar",assignSuccess:"Bobina asignada y ranura del AMS configurada",assignFailed:"Error al asignar la bobina",selectSpool:"Seleccione una bobina para asignar a esta ranura",assigned:"Asignada",assigning:"Asignando...",searchSpools:"Buscar bobinas...",showAllSpools:"Mostrar todas las bobinas",spoolmanSpools:"Bobinas de Spoolman",allMaterials:"Todos los materiales",filterByBrand:"Filtrar por marca...",showArchived:"Mostrar archivadas",quickAdd:"Añadir rápido (existencias)",quantity:"Cantidad",stock:"Existencias",configured:"Configurada",spoolsCreated:"{{count}} bobinas creadas",spoolsPartiallyCreated:"{{created}} de {{total}} bobinas creadas (algunas fallaron)",spoolCreated:"Bobina creada",spoolUpdated:"Bobina actualizada",spoolDeleted:"Bobina eliminada",deepLinkSpoolNotFound:"Bobina no encontrada",deepLinkFetchFailed:"No se pudo cargar la bobina — inténtelo de nuevo",spoolArchived:"Bobina archivada",spoolRestored:"Bobina restaurada",kProfileSaveFailed:"No se pudieron guardar los ajustes del perfil K",syncWeightSpoolNotFound:"Bobina no encontrada — es posible que se haya eliminado",syncWeightSpoolmanUnreachable:"Spoolman no es accesible — inténtelo más tarde",syncWeightFailed:"Error al sincronizar el peso",spoolmanUnreachable:"Spoolman no es accesible — inténtelo de nuevo más tarde",deleteSpoolNotFound:"Bobina no encontrada — es posible que ya se haya eliminado",deleteFailed:"Error al eliminar la bobina",archiveSpoolNotFound:"Bobina no encontrada — es posible que ya se haya eliminado",archiveFailed:"Error al archivar la bobina",restoreSpoolNotFound:"Bobina no encontrada — es posible que ya se haya eliminado",restoreFailed:"Error al restaurar la bobina",saveFailed:"Error al guardar los cambios",tagClearFailed:"Error al borrar la etiqueta",deleteConfirm:"¿Está seguro de que desea eliminar esta bobina? Esto no se puede deshacer.",archiveConfirm:"¿Está seguro de que desea archivar esta bobina?",advancedSettings:"Ajustes avanzados",filamentInfoTab:"Información del filamento",paProfileTab:"Perfil PA",filamentInfo:"Filamento",additional:"Adicional",loadingPresets:"Cargando preajustes de la nube...",cloudConnected:"Nube conectada",cloudNotConnected:"Nube no conectada (usando los valores predeterminados)",recentColors:"Recientes",searchColors:"Buscar colores...",searchResults:"Resultados de búsqueda",allColors:"Todos los colores",commonColors:"Colores comunes",showLess:"Mostrar menos",showAll:"Mostrar todos",noColorsFound:"Ningún color coincide con su búsqueda",noResults:"No se encontraron coincidencias",extraColorsLabel:"Colores adicionales",extraColorsPlaceholder:"EC984C,#6CD4BC,A66EB9,D87694",extraColorsHint:"Pegue de 2 a 8 paradas hexadecimales, separadas por comas. Se muestra como un degradado.",extraColorsInvalid:"Se ignoró el hexadecimal no válido: {{tokens}}",colorEffectLabel:"Efecto",colorEffect:{none:"Ninguno",sparkle:"Destellos",wood:"Madera",marble:"Mármol",glow:"Brillante en la oscuridad",matte:"Mate",silk:"Seda",galaxy:"Galaxia",rainbow:"Arcoíris",metal:"Metal",translucent:"Translúcido",gradient:"Degradado",dualColor:"Bicolor",triColor:"Tricolor",multicolor:"Multicolor"},selectMaterialFirst:"Seleccione primero un material en la pestaña de información del filamento.",noPrintersConfigured:"No hay impresoras configuradas. Añada impresoras para usar perfiles PA.",matchingFilter:"Coincidentes",anyBrand:"Cualquier marca",anyVariant:"Cualquier variante",autoSelect:"Selección automática",matches:"coincidencias",match:"coincidencia",noMatches:"Sin coincidencias",connected:"Conectada",offline:"Desconectada",printerOffline:"La impresora está desconectada. Conéctela para ver los perfiles de calibración.",noKProfilesMatch:"Ningún perfil K coincide con el filamento seleccionado.",leftNozzle:"Boquilla izquierda",rightNozzle:"Boquilla derecha",profilesSelected:"perfil(es) de calibración seleccionado(s)",totalInventory:"Inventario total",totalConsumed:"Total consumido",byMaterial:"Por material",inPrinter:"En la impresora",lowStock:"Existencias bajas",sinceTracking:"Desde que comenzó el seguimiento",resetConsumedCounter:"Restablecer contador",resetConsumedCounterTooltip:"Poner a cero el contador de gramos consumidos de esta bobina. El peso restante no cambia.",resetConsumedCounterConfirm:"¿Restablecer a 0 el contador de gramos consumidos de esta bobina? Las impresiones futuras volverán a contar desde cero. La bobina en sí, su cálculo de peso restante y sus ajustes no cambian.",resetAllConsumedCounters:"Restablecer todos los contadores",resetAllConsumedCountersTooltip:"Poner a cero el contador de gramos consumidos de todas las bobinas. Los pesos restantes no cambian.",resetAllConsumedCountersConfirm:"¿Restablecer a 0 el contador de gramos consumidos de las {{count}} bobinas (incluidas las archivadas)? Esto borra la estadística «Total consumido» para que las impresiones futuras cuenten desde cero. Las bobinas y los pesos restantes no cambian.",consumedCounterReset:"Contador restablecido",allConsumedCountersReset:"Contador restablecido para {{count}} bobina(s)",resetConsumedCounterFailed:"Error al restablecer el contador",loadedInAms:"Cargada en AMS/ext.",remaining:"Restante",weightCheck:"Comprobación de peso",lastWeighed:"Pesada por última vez",neverWeighed:"Nunca pesada",search:"Buscar bobinas...",showing:"Mostrando",to:"a",of:"de",show:"Mostrar",spools:"bobinas",spool:"bobina",page:"Página",noSpoolsMatch:"No se encontraron resultados",noSpoolsMatchDesc:"Pruebe a ajustar su búsqueda o sus filtros para encontrar lo que busca.",active:"Activas",archived:"Archivadas",all:"Todas",used:"Usada",new:"Nueva",clearFilters:"Borrar filtros",table:"Tabla",cards:"Tarjetas",net:"Neto",groupSimilar:"Agrupar",groupedSpools:"{{count}} bobinas idénticas",groupedRows:"filas",columns:"Columnas",configureColumns:"Configurar columnas",configureColumnsDesc:"Arrastre para reordenar las columnas o use las flechas. Conmute la visibilidad con el icono del ojo.",visible:"visibles",reset:"Restablecer",cancel:"Cancelar",applyChanges:"Aplicar cambios",moveUp:"Subir",moveDown:"Bajar",hideColumn:"Ocultar columna",showColumn:"Mostrar columna",linkToSpool:"Vincular a bobina",tagLinked:"Etiqueta vinculada a la bobina",tagLinkFailed:"Error al vincular la etiqueta",tagAlreadyLinked:"La etiqueta ya está vinculada a otra bobina",unknownTag:"Se detectó una etiqueta RFID desconocida",usageHistory:"Historial de uso",noUsageHistory:"Aún no se ha registrado ningún uso",printName:"Nombre de la impresión",weightConsumed:"Peso consumido",clearHistory:"Borrar",historyCleared:"Historial de uso borrado",fillSourceLabel:"(Inv.)",lowStockThresholdError:"El umbral debe estar entre 0,1 y 99,9",assignMismatchTitle:"Discrepancia de material",assignMismatchMessage:'El material de la bobina seleccionada "{{spoolMaterial}}" no coincide con el material de la bandeja "{{trayMaterial}}" de {{location}}. ¿Asignar de todos modos?',assignMismatchConfirm:"Asignar de todos modos",assignPartialMismatchMessage:'El material de la bobina "{{spoolMaterial}}" es similar pero no coincide exactamente con "{{trayMaterial}}" en {{location}}. ¿Desea continuar?',assignProfileMismatchMessage:'El perfil de la bobina "{{spoolProfile}}" no coincide con el perfil de la bandeja "{{trayProfile}}" en {{location}}. ¿Desea continuar?',assignReconfigureNote:"La ranura del AMS se reconfigurará para usar el perfil de la bobina.",spoolmanFilamentCatalog:"Catálogo de filamentos de Spoolman",pickFromSpoolmanCatalog:"Elegir del catálogo de Spoolman…",spoolmanFilamentSelected:"Filamento seleccionado del catálogo de Spoolman",spoolmanFilamentUnlinked:"Vínculo del catálogo de filamentos borrado",noSpoolmanFilaments:"No se encontraron filamentos en el catálogo de Spoolman",spoolmanFilamentColorSwatch:"Color del filamento",spoolWeightManagedBySpoolman:"El peso de la bobina vacía se gestiona por tipo de filamento en Spoolman",spoolmanCatalogLoadFailed:"Error al cargar el catálogo de filamentos de Spoolman"},timelapse:{title:"Time-lapse",create:"Crear time-lapse",download:"Descargar",delete:"Eliminar",preview:"Vista previa",frameRate:"Velocidad de fotogramas",quality:"Calidad",processing:"Procesando...",noTimelapses:"No hay time-lapses disponibles"},ams:{title:"AMS",slot:"Ranura",empty:"Vacía",emptySlot:"Ranura vacía",slotEmpty:"Vacía",emptySlotReset:"No hay filamento asignado",unknown:"Desconocido",humidity:"Humedad",temperature:"Temperatura",filamentType:"Tipo de filamento",filamentColor:"Color",remaining:"Restante",history:"Historial del AMS",noHistory:"No hay historial disponible",configureSlot:"Configurar ranura",externalSpool:"Bobina externa",profile:"Perfil",kFactor:"Factor K",fill:"Rellenar",configure:"Configurar",used:"usado",remainingUnit:"restante"},printModal:{title:"Iniciar impresión",selectPrinter:"Seleccionar impresora",selectPlate:"Seleccionar cama",filamentMapping:"Mapeo de filamentos",totalCost:"Coste total:",slotRemainingShort:" - quedan {{grams}} g",printSettings:"Ajustes de impresión",bedLeveling:"Nivelación de la cama",flowCalibration:"Calibración del flujo",vibrationCalibration:"Calibración de vibración",layerInspection:"Inspección de la primera capa",timelapse:"Time-lapse",startPrint:"Iniciar impresión",addToQueue:"Añadir a la cola",cancel:"Cancelar",noPrintersAvailable:"No hay impresoras disponibles",printerBusy:"La impresora está ocupada",printerOffline:"La impresora está desconectada",sameTypeDifferentColor:"Mismo tipo, color distinto",filamentTypeNotLoaded:"Tipo de filamento no cargado",openCalendar:"Abrir calendario",leftNozzle:"I",rightNozzle:"D",leftNozzleTooltip:"Boquilla izquierda",rightNozzleTooltip:"Boquilla derecha",filamentOverride:"Anulación de filamento",filamentOverrideHint:"Anule opcionalmente los filamentos para la asignación basada en el modelo. El planificador comparará con los filamentos que ha seleccionado en lugar de los valores originales del 3MF.",originalFilament:"Original",overrideWith:"Anular con",resetToOriginal:"Restablecer al original",insufficientFilamentTitle:"No hay suficiente filamento",insufficientFilamentMessage:"Algunas bobinas asignadas tienen menos filamento restante del que necesita esta impresión:",insufficientFilamentLine:"{{printer}} - {{slot}}: necesita {{required}} g, restante {{remaining}} g",printAnyway:"Imprimir de todos modos",forceColorMatch:"Forzar la coincidencia de color",staggerPrinterStarts:"Escalonar los inicios de las impresoras",staggerGroupSize:"Tamaño de grupo",staggerInterval:"Intervalo (min)",staggerPreview:"{{printers}} impresoras → {{groups}} grupos de {{size}}, iniciando cada {{interval}} min",staggerLastGroup:"último grupo: {{count}}",staggerTotal:"total: {{minutes}} min",staggerToPrinters:"Escalonar en {{count}} impresoras",gcodeInjection:"Inyectar G-code de impresión automática"},backup:{includesEncryptionKey:"Las copias de seguridad locales incluyen el archivo de clave de cifrado de MFA (DATA_DIR/.mfa_encryption_key) para que un ZIP de copia de seguridad sea autónomo. Trate el ZIP como información sensible — cualquiera que tenga el archivo puede descifrar los secretos de cliente de OIDC y los secretos TOTP que contiene.",title:"Copia de seguridad y restauración",createBackup:"Crear copia de seguridad",restoreBackup:"Restaurar copia de seguridad",restoreDescription:"Reemplazar todos los datos desde un archivo de copia de seguridad",downloadBackup:"Descargar copia de seguridad",uploadBackup:"Subir copia de seguridad",lastBackup:"Última copia de seguridad",autoBackup:"Copia de seguridad automática",backupNow:"Hacer copia de seguridad ahora",restoreWarning:"Advertencia: restaurar una copia de seguridad sobrescribirá todos los datos actuales.",includeArchives:"Incluir archivos",includeSettings:"Incluir ajustes",includeProfiles:"Incluir perfiles",backupSuccess:"Copia de seguridad creada correctamente",restoreSuccess:"Copia de seguridad restaurada correctamente",backupFailed:"Error en la copia de seguridad",restoreFailed:"Error en la restauración",restoreNote:"La impresora virtual se detendrá durante la restauración",githubBackup:"Copia de seguridad en Git",enabled:"Activada",cloudLoginRequired:"Se requiere iniciar sesión en Bambu Cloud. Inicie sesión en Perfiles → Perfiles en la nube para activar la copia de seguridad en GitHub.",cloudLoginRequiredShort:"Se requiere iniciar sesión en la nube",githubDescription:"Sincronice automáticamente sus perfiles con un repositorio privado de GitHub para la copia de seguridad y el historial de versiones.",repoIsPrivate:"El repositorio es privado — es seguro hacer copias de seguridad en él.",repoIsPublicWarning:"El repositorio es PÚBLICO. Las copias de seguridad de Bambuddy incluyen credenciales de MQTT, tokens de Home Assistant, tokens de Prometheus, su correo de Bambu Cloud y los códigos de acceso de las impresoras mediante los perfiles K. El guardado está bloqueado hasta que haga el repositorio privado en los ajustes de su proveedor.",repoVisibilityUnknown:"No se pudo determinar la visibilidad del repositorio. Bambuddy se niega a hacer copias de seguridad en cualquier cosa que no se confirme como privada; el guardado se bloqueará.",repositoryUrl:"URL del repositorio",repoUrlPlaceholderGitHub:"https://github.com/username/repo-name",repoUrlPlaceholderGitea:"https://gitea.example.com/username/repo-name",repoUrlPlaceholderForgejo:"https://forgejo.example.com/username/repo-name",repoUrlPlaceholderGitLab:"https://gitlab.com/username/repo-name",allowInsecureHttp:"Permitir HTTP no seguro",allowInsecureHttpHint:"Actívelo para instancias autoalojadas en redes privadas sin TLS",personalAccessToken:"Token de acceso personal",tokenSaved:"(guardado)",enterNewToken:"Introduzca un nuevo token para actualizar",tokenHint:"Token de granularidad fina con permiso de lectura/escritura de Contents",branch:"Rama",provider:"Proveedor de Git",providerGitHub:"GitHub",providerGitLab:"GitLab",providerGitea:"Gitea",providerForgejo:"Forgejo",manualOnly:"Solo manual",hourly:"Cada hora",daily:"Diaria",weekly:"Semanal",includeInBackup:"Incluir en la copia de seguridad",kProfiles:"Perfiles K",kProfilesDescription:"Calibración de avance de presión de las impresoras conectadas",noPrintersConnected:"No hay impresoras conectadas",printersConnected:"{{connected}}/{{total}} conectadas",cloudProfiles:"Perfiles en la nube",cloudProfilesDescription:"Preajustes de filamento, impresora y proceso de Bambu Cloud",appSettings:"Ajustes de la aplicación",appSettingsDescription:"Configuración de Bambuddy (base de datos completa)",spoolInventory:"Inventario de bobinas",spoolInventoryDescription:"Bobinas de filamento, historial de uso y seguimiento de costes",printArchives:"Archivos de impresión",printArchivesDescription:"Metadatos del historial de impresión (sin archivos gcode/3MF)",lastBackupAt:"Última copia de seguridad:",noBackupsYet:"Aún no hay copias de seguridad",next:"Siguiente:",startingBackup:"Iniciando la copia de seguridad...",test:"Probar",enableBackup:"Activar la copia de seguridad",testConnection:"Probar conexión",enterRepoUrl:"Introduzca la URL del repositorio",enterRepoAndToken:"Introduzca la URL del repositorio y el token de acceso",repoRequired:"La URL del repositorio es obligatoria",tokenRequired:"El token de acceso es obligatorio",githubBackupEnabled:"Copia de seguridad en GitHub activada",tokenUpdated:"Token actualizado",settingsSaved:"Ajustes guardados",failedToSave:"Error al guardar: {{message}}",backupCompleteFiles:"Copia de seguridad completada - {{count}} archivos actualizados",backupSkippedNoChanges:"Copia de seguridad omitida - sin cambios",backupFailed2:"Error en la copia de seguridad: {{message}}",clearedLogs:"Se borraron {{count}} registros",failedToClearLogs:"Error al borrar los registros: {{message}}",history:"Historial",clear:"Borrar",date:"Fecha",status:"Estado",commit:"Confirmación",localBackup:"Copia de seguridad local",localBackupDescription:"Cree una copia de seguridad completa de sus datos de Bambuddy, incluida la base de datos, los archivos, las subidas y todos los archivos.",downloadBackupLabel:"Descargar copia de seguridad",completeBackupZip:"Copia de seguridad completa: base de datos + todos los archivos (ZIP)",download:"Descargar",preparingBackup:"Preparando la copia de seguridad...",creatingArchive:"Creando el archivo de copia de seguridad... Esto puede tardar un rato para archivos grandes.",downloadingFile:"Descargando el archivo de copia de seguridad...",backupDownloaded:"Copia de seguridad descargada correctamente",failedToCreateBackup:"Error al crear la copia de seguridad: {{message}}",restore:"Restaurar",restoreReplacesAll:"La restauración reemplaza todos los datos.",restoreReplacesAllDetail:"Su base de datos y archivos actuales se reemplazarán por completo. Se requiere un reinicio tras la restauración.",restoreConfirmTitle:"Restaurar copia de seguridad",restoreConfirmMessage:'¿Está seguro de que desea restaurar desde "{{filename}}"? Esto reemplazará por completo su base de datos actual y todos los archivos. La aplicación deberá reiniciarse tras la restauración.',restoreConfirmButton:"Restaurar copia de seguridad",uploadingFile:"Subiendo el archivo de copia de seguridad...",backupRestoredRestart:"Copia de seguridad restaurada. Reinicie Bambuddy.",failedToRestore:"Error al restaurar la copia de seguridad. Compruebe el formato del archivo.",reloadNow:"Recargar ahora",creatingBackup:"Creando copia de seguridad",restoringBackup:"Restaurando copia de seguridad",preparing:"Preparando...",processing:"Procesando...",doNotClosePage:"No cierre esta página ni navegue a otra. Esta operación puede tardar varios minutos para copias de seguridad grandes.",restoring:"Restaurando...",restoreComplete:"Restauración completada",restoreFailed2:"Error en la restauración",importSettings:"Importar ajustes desde un archivo de copia de seguridad",pleaseWaitRestoring:"Espere mientras se restauran sus datos",selectBackupFile:"Haga clic para seleccionar el archivo de copia de seguridad (.json o .zip)",duplicateHandling:"Cómo funciona la gestión de duplicados:",matchPrinters:"Impresoras",matchPrintersBy:"coincidencia por número de serie",matchSmartPlugs:"Enchufes inteligentes",matchSmartPlugsBy:"coincidencia por dirección IP",matchNotificationProviders:"Proveedores de notificaciones",matchNotificationProvidersBy:"coincidencia por nombre",matchFilaments:"Filamentos",matchFilamentsBy:"coincidencia por nombre + tipo + marca",matchArchives:"Archivos",matchArchivesBy:"coincidencia por hash del contenido (siempre se omiten)",matchPendingUploads:"Subidas pendientes",matchPendingUploadsBy:"coincidencia por nombre de archivo",matchSettingsTemplates:"Ajustes y plantillas",matchSettingsTemplatesBy:"siempre se sobrescriben",replaceExisting:"Reemplazar los datos existentes",keepExisting:"Conservar los datos existentes",overwriteDescription:"Sobrescribir los elementos que ya existen con los datos de la copia de seguridad",keepDescription:"Restaurar solo los elementos que aún no existen",overwriteCaution:"Precaución:",overwriteWarning:"Sobrescribir reemplazará sus configuraciones actuales con los datos de la copia de seguridad. Los códigos de acceso de las impresoras nunca se sobrescriben por seguridad.",cancel:"Cancelar",processingBackup:"Procesando el archivo de copia de seguridad...",itemsRestored:"Elementos restaurados",itemsSkipped:"Elementos omitidos",restored:"Restaurados",skippedAlreadyExist:"Omitidos (ya existen)",filesCategory:"Archivos (3MF, miniaturas, etc.)",andMore:"...y {{count}} más",newApiKeysGenerated:"Nuevas claves API generadas",keysShownOnce:"Estas claves solo se muestran una vez. ¡Cópielas ahora!",copy:"Copiar",noDataFound:"No se encontraron datos para restaurar en el archivo de copia de seguridad.",close:"Cerrar",scheduledBackup:"Copias de seguridad programadas",scheduledBackupDescription:"Cree automáticamente instantáneas de copia de seguridad según una programación. El directorio de salida se puede montar en un NAS o en almacenamiento externo.",frequency:"Frecuencia",backupTime:"Hora",retention:"Retención",retentionDescription:"Número de copias de seguridad que conservar",outputPath:"Ruta de salida",outputPathPlaceholder:"Predeterminada: {{path}}",outputPathDescription:"Déjelo vacío para la ubicación predeterminada",runNow:"Ejecutar ahora",backupFiles:"Archivos de copia de seguridad",noScheduledBackups:"Aún no hay copias de seguridad",deleteBackup:"Eliminar",deleteBackupConfirm:"¿Eliminar este archivo de copia de seguridad?",backupRunning:"Copia de seguridad en curso...",scheduledBackupComplete:"Copia de seguridad completada correctamente",scheduledBackupFailed:"Error en la copia de seguridad",nextBackup:"Próxima copia de seguridad",backupSize:"Tamaño",localTimeHint:"Hora local ({{tz}})",defaultPathLabel:"Predeterminada:",categories:{settings:"Ajustes",notification_providers:"Proveedores de notificaciones",notification_templates:"Plantillas de notificaciones",smart_plugs:"Enchufes inteligentes",printers:"Impresoras",filaments:"Filamentos",maintenance_types:"Tipos de mantenimiento",archives:"Archivos",projects:"Proyectos",pending_uploads:"Subidas pendientes",external_links:"Enlaces externos",api_keys:"Claves API"}},tags:{title:"Etiquetas",addTag:"Añadir etiqueta",editTag:"Editar etiqueta",deleteTag:"Eliminar etiqueta",tagName:"Nombre de la etiqueta",tagColor:"Color de la etiqueta",noTags:"No hay etiquetas",deleteConfirm:"¿Está seguro de que desea eliminar esta etiqueta?",manageTags:"Gestionar etiquetas"},uploadModal:{title:"Subir archivos 3MF",dragDrop:"Arrastre y suelte archivos .3mf aquí",or:"o",browseFiles:"Examinar archivos",extractionInfo:"El modelo de impresora se extraerá automáticamente de los metadatos del archivo 3MF.",uploaded:"subidos",failed:"fallidos",uploading:"Subiendo...",upload:"Subir",uploadFailed:"Error al subir"},editArchive:{title:"Editar archivo",name:"Nombre",namePlaceholder:"Nombre de la impresión",printer:"Impresora",noPrinter:"Sin impresora",project:"Proyecto",noProject:"Sin proyecto",itemsPrinted:"Elementos impresos",itemsPrintedHelp:"Número de elementos producidos en este trabajo de impresión",notes:"Notas",notesPlaceholder:"Añada notas sobre esta impresión...",externalLink:"Enlace externo",externalLinkPlaceholder:"https://printables.com/model/...",externalLinkHelp:"Enlace a Printables, Thingiverse u otra fuente",tags:"Etiquetas",tagsPlaceholder:"Añada etiquetas...",addMoreTags:"Añada más etiquetas...",matchingTags:'Coincidentes con "{{query}}"',existingTags:"Etiquetas existentes",clickToAdd:"(haga clic para añadir)",status:"Estado",failureReason:"Motivo del fallo",selectReason:"Seleccionar motivo...",photos:"Fotos del resultado impreso",photosHelp:"Haga clic en + para añadir fotos de su resultado impreso",printResult:"Resultado de la impresión",saving:"Guardando...",failureReasons:{adhesionFailure:"Fallo de adhesión",spaghettiDetached:"Espagueti / Desprendido",layerShift:"Desplazamiento de capa",cloggedNozzle:"Boquilla obstruida",filamentRunout:"Agotamiento del filamento",warping:"Alabeo",stringing:"Hilos",underExtrusion:"Subextrusión",powerFailure:"Corte de corriente",userCancelled:"Cancelada por el usuario",other:"Otro"},statuses:{completed:"Completada",failed:"Fallida",aborted:"Cancelada",printing:"Imprimiendo"}},kProfiles:{title:"Perfiles K",noPrintersConfigured:"No hay impresoras configuradas",addPrinterInSettings:"Añada una impresora en Ajustes para gestionar perfiles K",noActivePrinters:"No hay impresoras activas",enablePrinterConnection:"Active la conexión de una impresora para ver sus perfiles K",loadingProfiles:"Cargando perfiles K...",printerOffline:"Impresora desconectada",printerOfflineDesc:"La impresora seleccionada no está conectada. Enciéndala para ver los perfiles K.",noMatchingProfiles:"No hay perfiles coincidentes",noMatchingProfilesDesc:"Ningún perfil coincide con sus criterios de búsqueda",noKProfiles:"No hay perfiles K",noKProfilesDesc:"No se encontraron perfiles de avance de presión para la boquilla de {{diameter}} mm",createFirstProfile:"Crear el primer perfil",printer:"Impresora",nozzle:"Boquilla",refresh:"Actualizar",addProfile:"Añadir perfil",export:"Exportar",import:"Importar",select:"Seleccionar",selectAll:"Seleccionar todo",delete:"Eliminar",searchPlaceholder:"Buscar por nombre o filamento...",allExtruders:"Todos los extrusores",leftOnly:"Solo izquierdo",rightOnly:"Solo derecho",allFlow:"Todos los flujos",hfOnly:"Solo flujo alto",sOnly:"Solo estándar",sortName:"Ordenar: nombre",sortKValue:"Ordenar: valor K",sortFilament:"Ordenar: filamento",leftExtruder:"Extrusor izquierdo",rightExtruder:"Extrusor derecho",modal:{addTitle:"Añadir perfil K",editTitle:"Editar perfil K",profileName:"Nombre del perfil",profileNamePlaceholder:"Mi perfil de PLA",kValue:"Valor K",kValuePlaceholder:"0,020",kValueHelp:"Rango típico: 0,01 - 0,06 para PLA, 0,02 - 0,10 para PETG",filament:"Filamento",selectFilament:"Seleccionar filamento...",noFilamentsHelp:"No se encontraron filamentos. Cree primero un perfil K en Bambu Studio.",flowType:"Tipo de flujo",highFlow:"Flujo alto",standard:"Estándar",nozzleSize:"Tamaño de la boquilla",extruder:"Extrusor",extruders:"Extrusores",left:"Izquierdo",right:"Derecho",notes:"Notas (almacenadas localmente)",notesPlaceholder:"Añada notas sobre este perfil...",notesHelp:"Las notas se guardan en Bambuddy, no en la impresora",syncing:"Sincronizando con la impresora...",savingExtruder:"Guardando en el extrusor {{current}}/{{total}}...",pleaseWait:"Espere"},deleteConfirm:{title:"Eliminar perfil",cannotUndo:"Esto no se puede deshacer",message:'¿Está seguro de que desea eliminar "{{name}}" de la impresora?'},bulkDelete:{title:"Eliminar perfiles",cannotUndo:"Esto no se puede deshacer",message:"¿Está seguro de que desea eliminar {{count}} perfiles seleccionados de la impresora?"},toast:{profileSaved:"Perfil K guardado",profilesSaved:"Perfil K guardado en {{count}} extrusores",selectAtLeastOneExtruder:"Seleccione al menos un extrusor",profileDeleted:"Perfil K eliminado",profilesDeleted:"Se eliminaron {{count}} perfiles",exportedProfiles:"Se exportaron {{count}} perfiles",importedProfiles:"Se importaron {{count}} de {{total}} perfiles",noProfilesToExport:"No hay perfiles que exportar",invalidFileFormat:"Formato de archivo no válido",failedToParseImport:"Error al analizar el archivo de importación",failedToSaveBatch:"Error al guardar los perfiles K",noteSaved:"Nota guardada",failedToSaveNote:"Error al guardar la nota"},permission:{noRead:"No tiene permiso para actualizar perfiles",noCreate:"No tiene permiso para añadir perfiles",noUpdate:"No tiene permiso para actualizar perfiles K",noDelete:"No tiene permiso para eliminar perfiles K",noExport:"No tiene permiso para exportar perfiles",noImport:"No tiene permiso para importar perfiles"}},virtualPrinter:{title:"Impresora virtual",running:"En ejecución",stopped:"Detenida",description:{default:"Active una impresora virtual que aparece en Bambu Studio y OrcaSlicer. Los archivos enviados a esta impresora se archivarán directamente sin imprimir.",proxy:"Active un proxy que retransmite el tráfico del laminador a una impresora real, permitiendo la impresión remota a través de cualquier red."},enable:{title:"Activar la impresora virtual",visibleInSlicer:'Visible como "Bambuddy" en la detección del laminador',proxyingTo:"Haciendo de proxy hacia {{name}}",notActive:"No activa"},model:{title:"Modelo de impresora",description:"Seleccione qué modelo de impresora emular.",restartWarning:"Cambiar el modelo reiniciará la impresora virtual"},accessCode:{title:"Código de acceso",isSet:"El código de acceso está establecido",notSet:"No hay código de acceso establecido - necesario para activarla",placeholder:"Introduzca un código de 8 caracteres",placeholderChange:"Introduzca un nuevo código para cambiarlo",hint:"Debe tener exactamente 8 caracteres. Los laminadores lo usan para autenticarse.",charCount:"({{count}}/8)"},targetPrinter:{title:"Impresora de destino",configured:"Destino del proxy configurado",notConfigured:"No hay impresora de destino seleccionada - necesaria para el modo proxy",placeholder:"Seleccionar una impresora...",hint:"Seleccione la impresora a la que retransmitir el tráfico del laminador. La impresora debe estar en modo LAN.",noPrinters:"No hay impresoras configuradas. Añada primero una impresora para usar el modo proxy."},remoteInterface:{title:"Anulación de la interfaz de red",configured:"Anulación de la interfaz activa",optional:"Opcional - úsela si la IP detectada automáticamente es incorrecta (p. ej. varias tarjetas de red, Docker, VPN)",placeholder:"Detección automática (predeterminada)...",hint:"Anula la dirección IP anunciada mediante SSDP y usada en el certificado TLS. Útil cuando Bambuddy tiene varias interfaces de red."},mode:{title:"Modo",archive:"Archivar",archiveDesc:"Archivar los archivos inmediatamente",review:"Revisar",reviewDesc:"Revisar antes de archivar",queue:"Encolar",queueDesc:"Archivar y añadir a la cola",proxy:"Proxy",proxyDesc:"Retransmitir a una impresora real"},autoDispatch:{title:"Envío automático",description:"Iniciar automáticamente las impresiones al añadirlas a la cola. Cuando está desactivado, las impresiones esperan al envío manual."},queueForceColorMatch:{title:"Forzar la coincidencia de color",description:"Negarse a enviar a una impresora que no tiene cargados el tipo y el color exactos de filamento. Desactivado de forma predeterminada — sin esto, la cola usa la coincidencia solo por modelo y puede elegir una impresora con el color equivocado cargado."},tailscaleDisabled:{title:"Integración con Tailscale",description:"Actívelo para marcar esta IV como expuesta a través de Tailscale. Muestra la dirección de Tailscale del host para que sepa qué IP pegar en el laminador. El paso de importación de la CA no cambia — este interruptor no tiene ningún efecto sobre los certificados."},setupRequired:{title:"Configuración necesaria",description:"La función de impresora virtual requiere configuración adicional del sistema antes de funcionar. Esto incluye el reenvío de puertos, las reglas del cortafuegos y los ajustes específicos de la plataforma.",readGuide:"Lea la guía de configuración antes de activarla"},archiveNameSource:{title:"Origen del nombre del archivo",description:"Elija cómo se nombran los archivos nuevos cuando llegan a través de la impresora virtual. «Metadatos» usa el título incrustado por el laminador del 3MF (predeterminado). «Nombre de archivo» usa el nombre de archivo que Bambu Studio envió por FTP — útil si renombró el trabajo en el diálogo de «enviar a la impresora».",metadata:"Metadatos",filename:"Nombre de archivo"},caCert:{title:"Certificado del laminador",description:"Las impresoras virtuales usan un certificado TLS firmado por la CA de Bambuddy. Importe este certificado de CA en el almacén de confianza de su laminador una sola vez para que acepte la conexión — sin necesidad de copiarlo desde la línea de comandos.",copy:"Copiar",copied:"Copiado",download:"Descargar",fingerprint:"SHA-256"},howItWorks:{title:"Cómo funciona",step1:"En la misma LAN, las impresoras virtuales aparecen automáticamente en su laminador (Bambu Studio / OrcaSlicer) mediante detección. Desde otras redes, añádalas manualmente por dirección IP y código de acceso.",step2:"En los modos Archivar, Revisar y Encolar, use el botón «Enviar» de su laminador para subir archivos 3MF a Bambuddy. El laminador mostrará «Impresión correcta» — el archivo se almacena, no se imprime.",step3:"En el modo Proxy, la impresora virtual retransmite todo el tráfico a una impresora real — las impresiones comienzan inmediatamente como si estuviera conectada directamente."},status:{title:"Detalles del estado",printerName:"Nombre de la impresora",model:"Modelo",serialNumber:"Número de serie",mode:"Modo",pendingFiles:"Archivos pendientes",targetPrinter:"Impresora de destino",ftpPort:"Puerto FTP",mqttPort:"Puerto MQTT",ftpConnections:"Conexiones FTP",mqttConnections:"Conexiones MQTT"},toast:{updated:"Ajustes de la impresora virtual actualizados",failedToUpdate:"Error al actualizar los ajustes",copyFailed:"Error al copiar — pruebe a seleccionar el texto manualmente",accessCodeRequired:"Establezca primero un código de acceso",targetPrinterRequired:"Seleccione primero una impresora de destino",bindIpRequired:"Establezca primero una IP de enlace",accessCodeEmpty:"El código de acceso no puede estar vacío",accessCodeLength:"El código de acceso debe tener exactamente 8 caracteres",created:"Impresora virtual creada",failedToCreate:"Error al crear la impresora virtual",deleted:"Impresora virtual eliminada",failedToDelete:"Error al eliminar la impresora virtual"},list:{title:"Impresoras virtuales",add:"Añadir",addFirst:"Añadir impresora virtual",empty:"No hay impresoras virtuales configuradas. Añada una para empezar."},bindIp:{title:"Interfaz de enlace",placeholder:"Seleccionar interfaz...",hint:"Interfaz de red a la que se enlaza esta impresora virtual. Debe ser única por impresora."},proxy:{accessCodeHint:"En el modo proxy, use el código de acceso de su impresora de destino en el laminador. La conexión se reenvía de forma transparente a la impresora real."},addDialog:{title:"Añadir impresora virtual",name:"Nombre",hint:"Puede configurar el código de acceso, la impresora de destino y otros ajustes después de crearla.",create:"Crear"},deleteConfirm:{title:"Eliminar impresora virtual",message:'¿Está seguro de que desea eliminar "{{name}}"? Esto detendrá todos los servicios de esta impresora.'}},modelViewer:{openInSlicer:"Abrir en el laminador",tabs:{model:"Modelo 3D",gcode:"Vista previa de G-code"},notAvailable:"no disponible",notSliced:"no laminado",plates:"Camas",allPlates:"Todas las camas",plateNumber:"Cama {{number}}",plateCount:"{{count}} cama",plateCount_other:"{{count}} camas",objectCount:"{{count}} objeto",objectCount_other:"{{count}} objetos",filamentCount:"{{count}} filamento",filamentCount_other:"{{count}} filamentos",eta:"Tiempo estimado {{minutes}} min",noPreview:"No hay vista previa disponible para este archivo",pagination:{pageOf:"Página {{current}} de {{total}}",prev:"Anterior",next:"Siguiente"},errors:{failedToLoad:"Error al cargar el archivo",noMeshes:"No se encontraron mallas en el archivo 3MF",unsupportedFormat:"Formato de archivo no compatible"}},maintenanceDescriptions:{lubricateCarbonRods:"Aplique lubricante a las varillas de carbono para un movimiento suave",lubricateRails:"Aplique lubricante a las guías lineales para un movimiento suave",cleanNozzle:"Limpie el fusor y la boquilla para evitar obstrucciones",checkBelts:"Verifique la tensión de las correas para impresiones precisas",cleanBuildPlate:"Limpie la cama de impresión para una mejor adhesión",checkExtruder:"Inspeccione los engranajes del extrusor en busca de desgaste",checkCooling:"Asegúrese de que los ventiladores de refrigeración funcionan correctamente",generalInspection:"Inspección general de la impresora",cleanCarbonRods:"Limpie las varillas de carbono para reducir la fricción",lubricateSteelRods:"Aplique lubricante a las varillas de acero para un movimiento suave",cleanSteelRods:"Limpie las varillas de acero para reducir la fricción",cleanLinearRails:"Limpie las guías lineales para eliminar el polvo y los residuos",checkPtfeTube:"Inspeccione el tubo de PTFE en busca de desgaste o daños",replaceHepaFilter:"Reemplace el filtro HEPA para la calidad del aire",replaceCarbonFilter:"Reemplace el filtro de carbón activado",lubricateLeftNozzleRail:"Lubrique la guía de la boquilla izquierda (serie H2)"},smartPlugs:{offline:"Desconectado",admin:"Administración",openPlugAdminPage:"Abrir la página de administración del enchufe",deleteSmartPlug:"Eliminar enchufe inteligente",turnOnSmartPlug:"Encender el enchufe inteligente",turnOffSmartPlug:"Apagar el enchufe inteligente",turnOn:"Encender",turnOff:"Apagar",addSmartPlug:{scanningNetwork:"Escaneando la red...",chooseEntity:"Elija una entidad...",connectionFailed:"Error de conexión",searchEntities:"Buscar entidades...",searchPowerSensors:"Buscar sensores de potencia...",searchEnergySensors:"Buscar sensores de energía...",placeholders:{plugName:"Enchufe del salón",mqttStateOnValue:"ON, true, 1",mqttSameAsPower:"Igual que el tema de potencia, o distinto"}},linkedTo:"Vinculado a:",monitorOnly:"Solo supervisión",alerts:"Alertas",scheduleOn:"Encendido a las {{time}}",scheduleOff:"Apagado a las {{time}}",on:"Encendido",off:"Apagado",power:"Potencia",kwhToday:"kWh hoy",settings:"Ajustes",automationSettings:"Ajustes de automatización",showInSwitchbar:"Mostrar en la barra de interruptores",quickAccessSidebar:"Acceso rápido desde la barra lateral",enabled:"Activada",enableAutomation:"Activar la automatización para este enchufe",autoOn:"Encendido automático",autoOnDescription:"Encender cuando comienza la impresión",autoOff:"Apagado automático",autoOffDescription:"Apagar cuando se completa la impresión (una sola vez)",autoOffPersistent:"Mantener activado",autoOffPersistentDescription:"Permanecer activado entre impresiones en lugar de una sola vez",autoOffAfterDrying:"Apagado automático tras el secado",autoOffAfterDryingDescription:"Apagar cuando se completa el secado del AMS",delayAfterDryingMinutes:"Retardo de secado (minutos)",turnOffDelayMode:"Modo de retardo de apagado",time:"Tiempo",temp:"Temp.",delayMinutes:"Retardo (minutos)",tempThreshold:"Umbral de temperatura (°C)",tempThresholdDescription:"Se apaga cuando la boquilla se enfría por debajo de esta temperatura",edit:"Editar",deleteConfirm:'¿Está seguro de que desea eliminar "{{name}}"? Esto no se puede deshacer.',turnOnConfirm:'¿Está seguro de que desea encender "{{name}}"?',turnOffConfirm:'¿Está seguro de que desea apagar "{{name}}"? Esto cortará la corriente al dispositivo conectado.',failedToTurn:'Error al {{action}} "{{name}}"',unknown:"Desconocido",addTitle:"Añadir enchufe inteligente",editTitle:"Editar enchufe inteligente",stopScanning:"Detener escaneo",discoverTasmota:"Detectar dispositivos Tasmota",foundDevices:"Se encontraron {{count}} dispositivo(s) - haga clic para seleccionar:",noDevicesFound:"No se encontraron dispositivos Tasmota en su red",haNotConfigured:"Home Assistant no está configurado. Configúrelo en",haSettingsPath:"Ajustes → Red → Home Assistant",selectEntity:"Seleccionar entidad *",ipAddress:"Dirección IP *",nameLabel:"Nombre *",username:"Nombre de usuario",password:"Contraseña",authHint:"Déjelo vacío si su dispositivo Tasmota no requiere autenticación",linkToPrinter:"Vincular a una impresora",noPrinter:"Sin impresora (solo control manual)",linkingDescription:"La vinculación activa el encendido/apagado automático cuando las impresiones comienzan/terminan",powerAlerts:"Alertas de potencia",alertAbove:"Alertar si supera (W)",alertBelow:"Alertar si está por debajo (W)",alertDescription:"Reciba una notificación cuando el consumo de energía cruce estos umbrales. Déjelo vacío para desactivar esa dirección.",dailySchedule:"Programación diaria",turnOnAt:"Encender a las",turnOffAt:"Apagar a las",scheduleDescription:"Encender/apagar automáticamente el enchufe a estas horas cada día. Déjelo vacío para omitir esa acción.",showOnPrinterCard:"Mostrar en la tarjeta de la impresora",displayOnPrinterCard:"Mostrar el botón en la tarjeta de la impresora",connectedResult:"¡Conectado!",deviceLabel:"Dispositivo: {{name}} - ",stateLabel:"Estado: {{state}}",test:"Probar",delete:"Eliminar",save:"Guardar",add:"Añadir",cancel:"Cancelar",failedToStartScan:"Error al iniciar el escaneo",nameRequired:"El nombre es obligatorio",entityRequired:"La entidad es obligatoria para los enchufes de Home Assistant",mqttTopicRequired:"Debe configurarse al menos un tema MQTT para la supervisión de potencia, energía o estado",loadingEntities:"Cargando entidades...",loading:"Cargando...",failedToLoadEntities:"Error al cargar las entidades: {{error}}",noEntitiesMatching:'No se encontraron entidades que coincidan con "{{search}}"',noEntitiesAvailable:"No hay entidades disponibles",searchingEntities:"Buscando en todas las entidades ({{count}} encontradas)",showingEntities:"Mostrando switch, light, input_boolean ({{count}} disponibles)",energyMonitoringOptional:"Supervisión de energía (opcional)",energyMonitoringHint:"Busque y seleccione sensores que proporcionen datos de potencia/energía.",powerSensorW:"Sensor de potencia (W)",energyTodayKwh:"Energía de hoy (kWh)",totalEnergyKwh:"Energía total (kWh)",noMatchingSensors:"No hay sensores coincidentes",none:"Ninguno",mqttNotConfigured:"El broker MQTT no está configurado. Establezca la dirección del broker en",mqttSettingsPath:"Ajustes → Red → Publicación MQTT",mqttNotConfiguredSuffix:"(no necesita activar la publicación, solo rellenar los datos del broker).",mqttMonitorOnlyDescription:"Los enchufes MQTT reciben los datos de potencia/energía mediante una suscripción MQTT. El control de encendido/apagado no está disponible - use su broker MQTT o sistema de domótica.",powerMonitoring:"Supervisión de potencia",energyMonitoring:"Supervisión de energía",stateMonitoring:"Supervisión de estado",optional:"opcional",topic:"Tema",jsonPath:"Ruta JSON",multiplier:"Multiplicador",onValue:"Valor de ON",mqttPowerHint:`La ruta JSON extrae el valor de la carga útil JSON (p. ej., "power_l1"). Déjelo vacío si el tema publica valores numéricos sin procesar.
+EIN-Wert: der genaue String der "EIN" bedeutet. Leer lassen für Auto-Erkennung (ON, true, 1).`,restControl:"Steuerung",restOnUrl:"Einschalt-URL",restOffUrl:"Ausschalt-URL",restOnBody:"EIN-Anforderungstext",restOffBody:"AUS-Anforderungstext",restMethod:"HTTP-Methode",restHeaders:"Custom Headers (JSON)",restStatusUrl:"Status-URL",restStatusPath:"JSON-Pfad für Status",restStatusOnValue:"EIN-Wert",restPowerUrl:"Strom-URL",restPowerPath:"JSON-Pfad für Leistung",restPowerMultiplier:"Power Multiplikator",restEnergyUrl:"Energie URL",restEnergyPath:"JSON-Pfad für Energie",restEnergyMultiplier:"Energie Multiplikator",restUrlRequired:"Mindestens eine URL (ON oder OFF) ist für REST-Steckdosen erforderlich",restHeadersHint:'z. B. {"Authorization": "Bearer your-token"}',restBodyHint:'z. B. ON, {"state": "on"}',restStatusHint:"URL zum Abfragen des aktuellen Status",restPathHint:"z. B. state oder data.power.status",restPowerUrlHint:"Eigene URL für Leistungsdaten (nutzt Status URL wenn leer)",restEnergyUrlHint:"Eigene URL für Energiedaten (nutzt Status URL wenn leer)",restEnergyHint:"Jeder Wert kann eine eigene URL verwenden oder auf die Status URL zurückgreifen. Multiplikatoren für Einheitenumrechnung verwenden (z.B. 0.001 für Wh zu kWh).",testConnection:"Verbindung testen",connectionSuccess:"Verbindung erfolgreich",noSwitchesInSwitchbar:"Keine Schalter in der Schaltleiste",enableSwitchbarHint:'"In Schaltleiste anzeigen" unter Einstellungen > Smart Plugs aktivieren'},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"E-Mail",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"SMTP-E-Mail-Benachrichtigungen",telegram:"Benachrichtigungen über Telegram-Bot",discord:"An Discord-Kanal per Webhook senden",ntfy:"Kostenlose, selbst-hostbare Push-Benachrichtigungen",pushover:"Einfache, zuverlässige Push-Benachrichtigungen",callmebot:"Kostenlose WhatsApp-Benachrichtigungen über CallMeBot",webhook:"Generischer HTTP-POST an beliebige URL",homeassistant:"Dauerhafte Benachrichtigungen im Home Assistant Dashboard"},lastSuccess:"Zuletzt: {{date}}",error:"Fehler",printer:"Drucker:",allPrinters:"Alle Drucker",sendTestNotification:"Testbenachrichtigung senden",eventSettings:"Ereigniseinstellungen",enabled:"Aktiviert",sendFromProvider:"Benachrichtigungen von diesem Anbieter senden",printEvents:"Druckereignisse",printerStatus:"Druckerstatus",amsAlarms:"AMS-Alarme",amsHtAlarms:"AMS-HT-Alarme",printQueue:"Druckwarteschlange",start:"Start",plateCheck:"Plattenkontrolle",complete:"Abgeschlossen",failed:"Fehlgeschlagen",stopped:"Gestoppt",progress:"Fortschritt",offline:"Offline",lowFilament:"Filament niedrig",maintenance:"Wartung",amsHumidity:"AMS-Feuchtigkeit",amsTemp:"AMS-Temperatur",amsHtHumidity:"AMS-HT-Feuchtigkeit",amsHtTemp:"AMS-HT-Temperatur",bedCooled:"Bett abgekühlt",firstLayer:"Erste Schicht",quiet:"Ruhe",digest:"Zusammenfassung {{time}}",printStarted:"Druck gestartet",plateNotEmpty:"Platte nicht leer",plateNotEmptyDescription:"Objekte vor dem Druck erkannt",printCompleted:"Druck abgeschlossen",bedCooledLabel:"Bett abgekühlt",bedCooledDescription:"Bett nach dem Druck unter Schwellenwert abgekühlt",firstLayerCompleteLabel:"Erste Schicht fertig",firstLayerCompleteDescription:"Benachrichtigung mit Foto nach erster Schicht",missingSpoolAssignmentLabel:"Fehlende Spulenzuordnung",missingSpoolAssignmentDescription:"Benachrichtigen, wenn ein Druck startet und benoetigte Schaechte keine zugeordnete Spule haben",printFailed:"Druck fehlgeschlagen",printStopped:"Druck gestoppt",progressMilestones:"Fortschrittsmeilensteine",progressMilestonesDescription:"Benachrichtigung bei 25%, 50%, 75%",printerOffline:"Drucker offline",printerError:"Druckerfehler",lowFilamentLabel:"Filament niedrig",maintenanceDue:"Wartung fällig",maintenanceDueDescription:"Benachrichtigen, wenn Wartung erforderlich ist",amsHumidityHigh:"AMS-Feuchtigkeit hoch",amsHumidityHighDescription:"Normale AMS-Feuchtigkeit überschreitet Schwellenwert",amsTemperatureHigh:"AMS-Temperatur hoch",amsTemperatureHighDescription:"Normale AMS-Temperatur überschreitet Schwellenwert",amsHtHumidityHigh:"AMS-HT-Feuchtigkeit hoch",amsHtHumidityHighDescription:"AMS-HT-Feuchtigkeit überschreitet Schwellenwert",amsHtTemperatureHigh:"AMS-HT-Temperatur hoch",amsHtTemperatureHighDescription:"AMS-HT-Temperatur überschreitet Schwellenwert",inventoryAlerts:"Bestandswarnungen",stockReorderAlert:"Nachbestellungswarnung",stockReorderAlertDescription:"SKU hat seinen Nachbestellungspunkt erreicht",stockBreakAlert:"Bestandsunterbrechungswarnung",stockBreakAlertDescription:"Der Bestand wird vor dem Eintreffen der Nachbestellung aufgebraucht sein",jobAdded:"Auftrag hinzugefügt",jobAddedDescription:"Auftrag zur Warteschlange hinzugefügt",jobAssigned:"Auftrag zugewiesen",jobAssignedDescription:"Modellbasierter Auftrag einem Drucker zugewiesen",jobStarted:"Auftrag gestartet",jobStartedDescription:"Warteschlangenauftrag hat Druck begonnen",jobWaiting:"Auftrag wartet",jobWaitingDescription:"Auftrag wartet auf Filament oder Drucker",jobSkipped:"Auftrag übersprungen",jobSkippedDescription:"Auftrag übersprungen (vorheriger fehlgeschlagen)",jobFailed:"Auftrag fehlgeschlagen",jobFailedDescription:"Auftrag konnte nicht gestartet werden",queueComplete:"Warteschlange abgeschlossen",queueCompleteDescription:"Alle Warteschlangenaufträge beendet",quietHours:"Ruhezeiten",noNotificationsDuring:"Keine Benachrichtigungen während dieser Zeiten",editProviderToChangeQuietHours:"Anbieter bearbeiten, um Ruhezeiten zu ändern",dailyDigest:"Tägliche Zusammenfassung",batchNotifications:"Benachrichtigungen zu einer täglichen Zusammenfassung bündeln",sendAt:"Senden um {{time}}",editProviderToChangeDigestTime:"Anbieter bearbeiten, um Zusammenfassungszeit zu ändern",edit:"Bearbeiten",deleteProvider:"Benachrichtigungsanbieter löschen",deleteConfirm:'Sind Sie sicher, dass Sie "{{name}}" löschen möchten? Dies kann nicht rückgängig gemacht werden.',delete:"Löschen",addTitle:"Benachrichtigungsanbieter hinzufügen",editTitle:"Benachrichtigungsanbieter bearbeiten",nameLabel:"Name *",namePlaceholder:"Meine Benachrichtigungen",providerTypeLabel:"Anbietertyp *",configuration:"Konfiguration",testConfiguration:"Konfiguration testen",printerFilter:"Druckerfilter",onlyFromPrinter:"Nur Benachrichtigungen für Ereignisse von diesem Drucker senden",quietHoursDnd:"Ruhezeiten (Nicht stören)",quietStart:"Start",quietEnd:"Ende",dailyDigestLabel:"Tägliche Zusammenfassung",sendDigestAt:"Zusammenfassung senden um",digestCollected:"Ereignisse werden gesammelt und als einzelne Zusammenfassung zu dieser Zeit gesendet",notificationEvents:"Benachrichtigungsereignisse",progressPercent:"(25 %, 50 %, 75 %)",bedCooledAfterPrint:"(nach Druckabschluss)",eventPriority:{sectionTitle:"ntfy-Priorität",helpNtfy:"Wähle eine Priorität pro aktiviertem Ereignis. ntfy nutzt diese, um Hinweise (Ton, Sichtbarkeit, Push-Verhalten) zu eskalieren. Hier nicht gesetzte Stufen verwenden den ntfy-Server-Standard.",min:"Min.",low:"Niedrig",default:"Standard",high:"Hoch",urgent:"Dringend"},cancel:"Abbrechen",save:"Speichern",add:"Hinzufügen",nameRequired:"Name ist erforderlich",fieldRequired:"{{field}} ist erforderlich",phoneNumber:"Telefonnummer",apiKey:"API-Schlüssel",serverUrl:"Server-URL",topic:"Thema",authToken:"Auth-Token",userKey:"Benutzerschlüssel",appToken:"App-Token",priority:"Priorität",botToken:"Bot-Token",chatId:"Chat-ID",smtpServer:"SMTP-Server",smtpPort:"SMTP-Port",security:"Sicherheit",authentication:"Authentifizierung",username:"Benutzername",password:"Passwort",fromEmail:"Absender-E-Mail",toEmail:"Empfänger-E-Mail",webhookUrl:"Webhook-URL",payloadFormat:"Payload-Format",authorization:"Autorisierung",titleFieldName:"Titel-Feldname",messageFieldName:"Nachrichten-Feldname",editTemplate:"Vorlage bearbeiten: {{name}}",titleLabel:"Titel",bodyLabel:"Inhalt",titlePlaceholder:"Benachrichtigungstitel...",bodyPlaceholder:"Benachrichtigungsinhalt...",availableVariables:"Verfügbare Variablen",clickToInsert:"Klicken, um an Cursorposition im Inhalt einzufügen",livePreview:"Live-Vorschau",hide:"Ausblenden",show:"Anzeigen",loadingPreview:"Vorschau wird geladen...",enterTemplateContent:"Vorlageninhalt eingeben, um Vorschau zu sehen",titlePreview:"Titel:",bodyPreview:"Inhalt:",resetToDefault:"Auf Standard zurücksetzen",titleRequired:"Titel ist erforderlich",bodyRequired:"Inhalt ist erforderlich",notificationLog:"Benachrichtigungsprotokoll",showFailedOnly:"Nur fehlgeschlagene",last24Hours:"Letzte 24 Stunden",last7Days:"Letzte 7 Tage",last30Days:"Letzte 30 Tage",last90Days:"Letzte 90 Tage",justNow:"Gerade eben",noFailedNotifications:"Keine fehlgeschlagenen Benachrichtigungen",noNotificationsLogged:"Keine Benachrichtigungen protokolliert",unknownProvider:"Unbekannter Anbieter",logTitle:"Titel",logMessage:"Nachricht",logError:"Fehler",logProvider:"Anbieter: {{type}}",logTime:"Zeit: {{time}}",refresh:"Aktualisieren",clearOld:"Alte löschen",statsSummary:"Letzte {{days}} Tage:",statsNotifications:"Benachrichtigungen",statsSent:"{{count}} gesendet",statsFailed:"{{count}} fehlgeschlagen",eventTypes:{print_start:"Druck gestartet",print_complete:"Druck abgeschlossen",print_failed:"Druck fehlgeschlagen",print_stopped:"Druck gestoppt",print_progress:"Fortschritt",printer_offline:"Drucker offline",printer_error:"Druckerfehler",filament_low:"Filament niedrig",maintenance_due:"Wartung fällig",test:"Test"},userEmail:{title:"Benachrichtigungen",emailNotifications:"E-Mail-Benachrichtigungen",emailNotificationsDesc:"Erhalten Sie E-Mail-Benachrichtigungen für Ihre eigenen Druckaufträge. E-Mails werden über die in der erweiterten Authentifizierung konfigurierten SMTP-Einstellungen gesendet.",sendingTo:"Benachrichtigungen werden gesendet an",noEmailWarning:"Ihr Konto hat keine E-Mail-Adresse. Wenden Sie sich an einen Administrator, um eine hinzuzufügen.",printJobNotifications:"Druckauftrags-Benachrichtigungen",printJobNotificationsDesc:"Wählen Sie aus, welche Ereignisse E-Mail-Benachrichtigungen für von Ihnen gesendete Druckaufträge auslösen.",printJobStarts:"Druckauftrag startet",printJobStartsDesc:"Benachrichtigt werden, wenn Ihr Druckauftrag beginnt.",printJobFinishes:"Druckauftrag fertig",printJobFinishesDesc:"Benachrichtigt werden, wenn Ihr Druckauftrag erfolgreich abgeschlossen wurde.",printErrors:"Druckfehler",printErrorsDesc:"Benachrichtigt werden, wenn Ihr Druckauftrag fehlschlägt oder auf einen Fehler stößt.",printJobStops:"Druckauftrag gestoppt",printJobStopsDesc:"Benachrichtigt werden, wenn Ihr Druckauftrag abgebrochen oder gestoppt wird.",saveSuccess:"Benachrichtigungseinstellungen gespeichert.",saveError:"Benachrichtigungseinstellungen konnten nicht gespeichert werden."}},richTextEditor:{bold:"Fett",italic:"Kursiv",underline:"Unterstrichen",bulletList:"Aufzählungsliste",numberedList:"Nummerierte Liste",alignLeft:"Linksbündig",alignCenter:"Zentriert",alignRight:"Rechtsbündig",addLink:"Link hinzufügen",removeLink:"Link entfernen"},externalLinks:{noLinksConfigured:"Keine externen Links konfiguriert",deleteLink:"Link löschen",removeCustomIcon:"Benutzerdefiniertes Symbol entfernen",openInNewTab:"In neuem Tab öffnen",placeholders:{linkName:"Mein Link"}},keyboardShortcuts:{title:"Tastaturkürzel",navigation:"Navigation",archivesSection:"Archive",kProfilesSection:"K-Profile",generalSection:"Allgemein",shortcuts:{goToPrinters:"Zu Drucker gehen",goToArchives:"Zu Archiv gehen",goToQueue:"Zur Warteschlange gehen",goToStats:"Zu Statistiken gehen",goToProfiles:"Zu Cloud-Profilen gehen",goToSettings:"Zu Einstellungen gehen",focusSearch:"Suche fokussieren",openUploadModal:"Upload-Modal öffnen",clearSelection:"Auswahl löschen / Eingabe aufheben",contextMenu:"Kontextmenü auf Karten",refreshProfiles:"Profile aktualisieren",newProfile:"Neues Profil",exitSelectionMode:"Auswahlmodus beenden",showHelp:"Diese Hilfe anzeigen"},footer:"Drücken Sie Esc oder klicken Sie außerhalb, um zu schließen"},notificationLog:{title:"Benachrichtigungsprotokoll",events:{printStarted:"Druck gestartet",printComplete:"Druck abgeschlossen",printFailed:"Druck fehlgeschlagen",printStopped:"Druck gestoppt",progress:"Fortschritt",printerOffline:"Drucker offline",printerError:"Druckerfehler",lowFilament:"Wenig Filament",maintenanceDue:"Wartung fällig",test:"Test"},timeAgo:{justNow:"Gerade eben",minutesAgo:"vor {{minutes}}m",hoursAgo:"vor {{hours}}h"}},restoreBackup:{title:"Backup wiederherstellen",restoring:"Wird wiederhergestellt...",restoreComplete:"Wiederherstellung abgeschlossen",restoreFailed:"Wiederherstellung fehlgeschlagen",importSettings:"Einstellungen aus Backup-Datei importieren",pleaseWait:"Bitte warten Sie, während Ihre Daten wiederhergestellt werden",clickToSelect:"Klicken Sie, um Backup-Datei auszuwählen (.json oder .zip)",howDuplicateHandling:"So funktioniert die Duplikatbehandlung:",categories:{printers:"Drucker",smartPlugs:"Smart Plugs",notificationProviders:"Benachrichtigungsanbieter",filaments:"Filamente",archives:"Archive",pendingUploads:"Ausstehende Uploads",settingsTemplates:"Einstellungen & Vorlagen"},matchingInfo:{printers:"abgeglichen nach Seriennummer",smartPlugs:"abgeglichen nach IP-Adresse",notificationProviders:"abgeglichen nach Name",filaments:"abgeglichen nach Name + Typ + Marke",archives:"abgeglichen nach Inhalts-Hash",pendingUploads:"abgeglichen nach Dateiname",settingsTemplates:"immer überschrieben"},replaceExisting:"Vorhandene Daten ersetzen",keepExisting:"Vorhandene Daten behalten",replaceDescription:"Bereits vorhandene Elemente mit Backup-Daten überschreiben",keepDescription:"Nur Elemente wiederherstellen, die noch nicht existieren",caution:"Vorsicht:",cautionText:"Das Überschreiben ersetzt Ihre aktuellen Konfigurationen durch Backup-Daten. Drucker-Zugangscodes werden aus Sicherheitsgründen niemals überschrieben.",itemsRestored:"Wiederhergestellte Elemente",itemsSkipped:"Übersprungene Elemente",restored:"Wiederhergestellt",skipped:"Übersprungen (existieren bereits)",filesLabel:"Dateien (3MF, Thumbnails, etc.)",newApiKeysGenerated:"Neue API-Schlüssel generiert",newApiKeysWarning:"Diese Schlüssel werden nur einmal angezeigt. Kopieren Sie sie jetzt!",processingBackup:"Backup-Datei wird verarbeitet...",noDataFound:"In der Backup-Datei wurden keine wiederherzustellenden Daten gefunden.",failedToRestore:"Backup konnte nicht wiederhergestellt werden. Bitte überprüfen Sie das Dateiformat."},backupExport:{title:"Backup exportieren",selectData:"Zu exportierende Daten auswählen",selectAll:"Alle auswählen",selectNone:"Keine auswählen",categoryDescriptions:{settings:"Sprache, Theme, Update-Einstellungen",notifications:"ntfy, Pushover, Discord, usw.",templates:"Benutzerdefinierte Nachrichtenvorlagen",smartPlugs:"Tasmota-Plug-Konfigurationen",externalLinks:"Seitenleiste Links zu externen Diensten",printers:"Druckerinformationen (Zugangscodes ausgeschlossen)",plateDetection:"Leere Platten-Referenzbilder",filaments:"Filamenttypen und -kosten",maintenance:"Benutzerdefinierte Wartungspläne",archives:"Alle Druckdaten + Dateien (3MF, Thumbnails, Fotos)",projects:"Projekte, BOM-Elemente und Anhänge",pendingUploads:"Virtueller Drucker-Uploads zur Überprüfung",apiKeys:"Webhook-API-Schlüssel (neue Schlüssel bei Import generiert)"},requiresPrinters:"Drucker müssen ausgewählt sein",zipFileWarning:"ZIP-Datei wird erstellt.",zipFileDescription:"Enthält alle 3MF-Dateien, Thumbnails, Zeitraffer und Fotos. Dies kann eine Weile dauern und zu einer großen Datei führen.",includeAccessCodes:"Zugangscodes einschließen",includeAccessCodesDescription:"Für die Übertragung auf eine andere Maschine",includeAccessCodesWarning:"Zugangscodes werden im Klartext eingeschlossen. Bewahren Sie diese Backup-Datei sicher auf!",categoriesSelected:"{{selectedCount}} Kategorien ausgewählt"},pendingUploads:{placeholders:{notes:"Notizen zu diesem Druck hinzufügen..."},discardUpload:"Upload verwerfen",archiveAllUploads:"Alle Uploads archivieren",discardAllUploads:"Alle Uploads verwerfen",archive:"Archivieren",timeAgo:{justNow:"Gerade eben",minutesAgo:"vor {{minutes}}m",hoursAgo:"vor {{hours}}h",daysAgo:"vor {{days}}d"}},apiBrowser:{placeholders:{requestBody:"JSON-Anforderungstext...",searchEndpoints:"Endpunkte suchen..."}},configureAmsSlot:{title:"AMS-Slot konfigurieren",slotConfigured:"Slot konfiguriert!",configuringSlot:"Slot wird konfiguriert:",slotLabel:"{{ams}} – Slot {{slot}}",searchPresets:"Voreinstellungen suchen...",colorPlaceholder:"Farbname oder Hex (z.B. braun, FF8800)",clearCustomColor:"Benutzerdefinierte Farbe löschen",noCloudPresets:"Keine Cloud-Voreinstellungen. Melden Sie sich bei Bambu Cloud an, um zu synchronisieren.",noPresetsAvailable:"Keine Voreinstellungen verfügbar. Melden Sie sich bei Bambu Cloud an oder importieren Sie lokale Profile.",noMatchingPresets:"Keine passenden Voreinstellungen gefunden.",custom:"Benutzerdefiniert",builtin:"Integriert",settingsSentToPrinter:"Einstellungen an Drucker gesendet",filamentProfile:"Filamentprofil",kProfileLabel:"K-Profil (Pressure Advance)",filteringFor:"Filtern nach: {{material}}",noKProfile:"Kein K-Profil (Standard 0.020 verwenden)",noMatchingKProfiles:"Keine passenden K-Profile gefunden. Standard K=0.020 wird verwendet.",selectFilamentFirst:"Zuerst ein Filamentprofil auswählen",kFromCalibration:"K={{value}} aus Druckerkalibrierung",customColorLabel:"Benutzerdefinierte Farbe (optional)",presetColors:"{{name}} Farben:",showLessColors:"Weniger Farben anzeigen",showMoreColors:"Mehr Farben anzeigen",clear:"Löschen",hexLabel:"Hex – #{{hex}}",resetting:"Wird zurückgesetzt...",resetSlot:"Slot zurücksetzen",cancel:"Abbrechen",configuring:"Wird konfiguriert...",configureSlot:"Slot konfigurieren"},githubBackup:{title:"Git-Backup",history:"Verlauf",downloadBackup:"Backup herunterladen",restoreBackup:"Backup wiederherstellen",noBackupsYet:"Noch keine Backups"},emailSettings:{placeholders:{fromName:"Bambuddy"}},tagManagement:{searchTags:"Tags suchen...",renameTag:"Tag umbenennen",deleteTag:"Tag löschen"},notificationTemplates:{placeholders:{title:"Benachrichtigungstitel...",body:"Benachrichtigungstext..."}},batchTag:{placeholders:{newTag:"Neuen Tag eingeben..."}},photoGallery:{deletePhoto:"Foto löschen"},filamentHoverCard:{copySpoolUuid:"Spulen-UUID kopieren"},kProfilesView:{hasNote:"Hat Notiz",copyProfile:"Profil kopieren"},layout:{openMenu:"Menü öffnen",noPermissionSystemInfo:"Sie haben keine Berechtigung zum Anzeigen von Systeminformationen"},dashboard:{dragToReorder:"Ziehen zum Neuordnen",hideWidget:"Widget ausblenden"},notificationProviderCard:{deleteNotificationProvider:"Benachrichtigungsanbieter löschen"},fileManagerModal:{closeFileManager:"Dateimanager schließen",sortFiles:"Dateien sortieren",goToParentFolder:"Zum übergeordneten Ordner gehen",threeView:"3D-Ansicht"},embeddedCameraViewer:{refreshStream:"Stream aktualisieren",close:"Schließen",zoomOut:"Verkleinern",resetZoom:"Zoom zurücksetzen",zoomIn:"Vergrößern",dragToResize:"Ziehen zum Größe ändern"},timelapseViewer:{skipBack5s:"5s zurückspringen",skipForward5s:"5s vorspringen"},notificationProviders:{descriptions:{email:"SMTP-E-Mail-Benachrichtigungen",telegram:"Benachrichtigungen über Telegram-Bot",discord:"An Discord-Kanal über Webhook senden",ntfy:"Kostenlose, selbst hostbare Push-Benachrichtigungen",pushover:"Einfache, zuverlässige Push-Benachrichtigungen",callmebot:"Kostenlose WhatsApp-Benachrichtigungen über CallMeBot",webhook:"Generischer HTTP POST zu beliebiger URL"}},logViewer:{searchPlaceholder:"Nachricht oder Logger-Name suchen...",noLogEntries:"Keine Logeinträge gefunden"},switchbarPopover:{noSwitchesInSwitchbar:"Keine Schalter in Schalterleiste"},projectPageModal:{placeholders:{title:"Titel",designer:"Designer",license:"Lizenz",description:"Beschreibung eingeben...",profileTitle:"Profil-Titel",profileDescription:"Profilbeschreibung..."}},spoolmanSettings:{},time:{unknown:"-",waiting:"Wartend",justNow:"Gerade eben",now:"Jetzt",minsAgo:"vor {{count}}m",inMins:"in {{count}}min",hoursAgo:"vor {{count}}h",inHours:"in {{count}}Std",daysAgo:"vor {{count}}d",inDays:"in {{count}}T"},spoolbuddy:{nav:{dashboard:"Übersicht",ams:"AMS",inventory:"Inventar",writeTag:"Schreiben",settings:"Einstellungen"},status:{nfcReady:"NFC bereit",nfcOff:"NFC aus",offline:"Offline",online:"Online",noPrinters:"Keine Drucker",deviceOffline:"Gerät offline",waitingConnection:"Warte auf Geräteverbindung...",systemReady:"System bereit",status:"Status"},dashboard:{readyToScan:"Bereit zum Scannen",idleMessage:"Spule auf die Waage legen zum Identifizieren",nfcHint:"NFC-Tag wird automatisch gelesen",device:"Gerät",syncWeight:"Gewicht sync.",weightSynced:"Synchronisiert!",unknownTag:"Unbekannter Tag",newTag:"Neuer Tag erkannt",onScale:"auf der Waage",linkSpool:"Mit Spule verknüpfen",linkTagTitle:"Tag mit Spule verknüpfen",linkTag:"Tag verknüpfen",selectSpool:"Spule zum Verknüpfen auswählen:",noUntagged:"Keine Spulen ohne Tags gefunden",tagDetected:"Tag erkannt",noTag:"Kein Tag",tagId:"Tag",grossWeight:"Bruttogewicht",spoolSize:"Spulengröße",close:"Schließen",currentSpool:"Aktuelle Spule",plateReady:"Druckplatte bereit: {{name}}",plateReadyLabel:"Bereit-zum-Quittieren-Liste",plateClearAction:"Frei",plateClearedToast:"Druckplatte als geleert markiert",plateClearFailed:"Druckplatte konnte nicht als geleert markiert werden"},modal:{spoolDetected:"Spule erkannt",assignToAms:"AMS zuweisen",syncWeight:"Gewicht sync.",weightSynced:"Synchronisiert!",syncing:"Synchronisiere...",newTagDetected:"Neuer Tag erkannt",addToInventory:"Zum Inventar hinzufügen",assignToAmsTitle:"AMS zuweisen",selectSlot:"Slot auswählen",assign:"Zuweisen",assigning:"Zuweisen...",assignSuccess:"Zugewiesen!",assignPendingInsert:"Zugewiesen. Slot wird beim Einsetzen der Spule konfiguriert.",assignError:"Fehler beim Zuweisen. Bitte erneut versuchen.",noPrinterSelected:"Drucker auswählen...",noAmsDetected:"Kein AMS an diesem Drucker erkannt",slot:"Slot"},weight:{noReading:"Kein Messwert",stable:"Stabil",measuring:"Messen...",tare:"Tarieren",calibrate:"Kalibrieren"},spool:{remaining:"Verbleibend",material:"Material",brand:"Marke",color:"Farbe",coreWeight:"Kern",labelWeight:"Etikett",scaleWeight:"Waage",netWeight:"Netto",lastUsed:"Zuletzt verwendet"},ams:{noData:"Kein AMS erkannt",connectAms:"AMS anschließen um Filament-Slots zu sehen",noPrinter:"Kein Drucker ausgewählt",selectPrinter:"Drucker in der oberen Leiste auswählen",printerDisconnected:"Drucker getrennt",humidity:"Feuchtigkeit",level:"Stufe",active:"Aktiv",slot:"Slot",empty:"Leer"},inventory:{search:"Spulen suchen...",empty:"Keine Spulen im Inventar",noResults:"Keine passenden Spulen",spools:"Spulen",addSpool:"Spule hinzufügen"},settings:{tabDevice:"Gerät",tabDisplay:"Anzeige",tabScale:"Waage",tabUpdates:"Aktualisierungen",nfcReader:"NFC-Leser",type:"Typ",connection:"Verbindung",notConnected:"N/V",deviceInfo:"Geräteinfo",hostname:"Host",uptime:"Betriebszeit",systemConfig:"Backend & Auth",backendUrl:"Bambuddy Backend URL",apiToken:"API-Token",apiTokenPlaceholder:"API-Token eingeben",saveConfig:"Konfiguration speichern",systemQueued:"Konfiguration in Warteschlange.",nfcDiagnostic:"NFC-Diagnose",scaleDiagnostic:"Waagen-Diagnose",readTagDiagnostic:"Tag-Lese-Diagnose",testNfc:"Leser testen",testScale:"Genauigkeit testen",testReadTag:"Tag lesen",systemFieldsRequired:"Backend-URL ist erforderlich.",brightness:"Helligkeit",saved:"Gespeichert",noBacklight:"Keine DSI-Hintergrundbeleuchtung erkannt. Helligkeitssteuerung erfordert ein DSI-Display.",screenBlank:"Bildschirm-Abschaltzeit",screenBlankDesc:"Bildschirm schaltet sich nach Inaktivität ab. Zum Aufwecken berühren.",displayNote:"Helligkeit wird als Software-Filter angewendet.",scaleCalibration:"Waagen-Kalibrierung",currentWeight:"Aktuelles Gewicht",tareOffset:"Tara",calFactor:"Faktor",knownWeight:"Bekanntes Gewicht",calStep1:"Alle Gegenstände von der Waage entfernen und Nullpunkt setzen.",calStep2:"Bekanntes Gewicht auf die Waage legen.",setZero:"Nullpunkt setzen",calibrateNow:"Kalibrieren",calibrated:"Kalibriert",tareSet:"Tara-Befehl gesendet. Warte auf Gerät...",tareComplete:"Tara abgeschlossen!",tareTimedOut:"Tara-Zeitüberschreitung — läuft der SpoolBuddy-Daemon?",tareFailed:"Tara-Befehl fehlgeschlagen",zeroSet:"Nullpunkt gesetzt. Bekanntes Gewicht auf die Waage legen.",calibrationDone:"Kalibrierung abgeschlossen!",calibrationFailed:"Kalibrierung fehlgeschlagen",lastCalibrated:"Zuletzt kalibriert",stable:"Stabil",settling:"Stabilisierung...",firmware:"Firmware",scale:"Waage",noDevice:"Kein SpoolBuddy-Gerät gefunden",daemonVersion:"Daemon-Version",currentVersion:"Aktuell",versionPending:"Warte auf Daemon...",checking:"Prüfe...",checkUpdates:"Nach Updates suchen",updateAvailable:"Update verfügbar",updateInstructions:"Update per SSH: SpoolBuddy-Installationsskript ausführen.",upToDate:"Aktuell",includeBeta:"Beta-Versionen einschließen"},writeTag:{tabExisting:"Vorhandene Spule",tabNew:"Neue Spule",tabReplace:"Tag ersetzen",searchPlaceholder:"Suche nach Material, Farbe, Marke...",noUntaggedSpools:"Keine Spulen ohne Tags",noTaggedSpools:"Keine Spulen mit Tags",selectSpool:"Spule auswählen, dann einen NTAG auf den Leser legen",placeTag:"NTAG auf den Leser legen",tagReady:"Tag erkannt — bereit zum Schreiben",writeTag:"Tag beschreiben",replaceTag:"Tag ersetzen",writing:"Tag wird beschrieben...",waiting:"Warte auf SpoolBuddy...",writeSuccess:"Tag erfolgreich beschrieben!",writeFailed:"Schreiben fehlgeschlagen",queueFailed:"Schreibbefehl konnte nicht eingereiht werden",tryAgain:"Erneut versuchen",cancel:"Abbrechen",replaceWarning:"Alter Tag wird getrennt. Neuer Tag ersetzt ihn.",deviceOffline:"SpoolBuddy ist offline",material:"Material",colorName:"Farbname",color:"Farbe",brand:"Marke",weight:"Gewicht (g)",createSpool:"Spule erstellen",creating:"Wird erstellt...",spoolCreated:"Spule erstellt! Bereit zum Schreiben.",createFailed:"Spule konnte nicht erstellt werden",incompleteDataWarning:"Tag mit unvollständigen Spoolman-Daten geschrieben"},quickMenu:{printerPower:"Drucker-Strom",systemControls:"System",restartDaemon:"Daemon neustarten",restartBrowser:"Browser neustarten",reboot:"Neustart",shutdown:"Herunterfahren",swipeToClose:"Nach unten wischen zum Schließen",confirmTitle:"Bestätigen",confirmShutdown:"Möchten Sie das SpoolBuddy wirklich herunterfahren? Sie benötigen physischen Zugang, um es wieder einzuschalten.",confirmReboot:"Möchten Sie das SpoolBuddy wirklich neu starten?",confirmRestartDaemon:"SpoolBuddy-Daemon neustarten? NFC und Waage sind vorübergehend nicht verfügbar.",confirmRestartBrowser:"Kiosk-Browser neustarten? Das Display wird kurz schwarz.",confirm:"Bestätigen",confirmPlugOn:"{{name}} einschalten?",confirmPlugOff:"{{name}} ausschalten?",turnOn:"Einschalten",turnOff:"Ausschalten"}},diagnostic:{modalTitle:"Verbindungsdiagnose — {{name}}",running:"Diagnose läuft...",runningElapsed:"Diagnose läuft... ({{elapsed}}s)",waitingForReportHint:"Warten darauf, dass der Drucker einen Statusbericht sendet — kann bis zu {{max}} Sekunden dauern.",runFailed:"Diagnose konnte nicht ausgeführt werden: {{error}}",retry:"Erneut ausführen",runButton:"Diagnose ausführen",sectionTitle:"Verbindungsdiagnose",sectionDescription:"Prüfen, warum ein Drucker keine Verbindung herstellt oder nicht druckt — Port-Erreichbarkeit, LAN-Entwicklermodus, Docker-Netzwerkmodus und Zugangsdaten.",noPrinters:"Keine Drucker konfiguriert.",overall:{ok:"Keine Probleme gefunden — die Druckerverbindung sieht gut aus.",warnings:"Der Drucker sollte funktionieren, aber einige Punkte erfordern Aufmerksamkeit.",problems:"Probleme gefunden, die erklären, warum der Drucker keine Verbindung herstellt oder nicht druckt."},check:{port_mqtt:{title:"Steuerungsport (MQTT 8883)",pass:"Erreichbar — der Drucker akzeptiert Steuerungsverbindungen.",fail:"Port 8883 ist nicht erreichbar. Der Drucker ist ausgeschaltet, hat eine andere IP-Adresse oder eine Firewall blockiert ihn. Überprüfen Sie die Drucker-IP und dass nichts Port 8883 blockiert."},port_ftps:{title:"Dateiübertragungsport (FTPS 990)",pass:"Erreichbar — das Senden von Druckdateien funktioniert.",warn:"Port 990 ist nicht erreichbar. Die Überwachung funktioniert möglicherweise weiterhin, aber das Senden von Drucken an den Drucker schlägt fehl. Stellen Sie sicher, dass Port 990 nicht blockiert ist."},port_rtsps:{title:"Kameraport (RTSPS 322)",pass:"Erreichbar — der Kamerastream funktioniert.",warn:"Port 322 ist nicht erreichbar. Die Live-Kameraansicht funktioniert nicht. Dies betrifft das Drucken nicht."},network_mode:{title:"Docker-Netzwerkmodus",pass:"Läuft im Host-Netzwerkmodus.",warn:'Bambuddy läuft im Docker-Bridge-Netzwerkmodus. Die Druckererkennung und der virtuelle Drucker benötigen den Host-Netzwerkmodus — erstellen Sie den Container mit "network_mode: host" neu.',skip:"Läuft nicht in Docker — nicht zutreffend."},subnet:{title:"Netzwerk-Subnetz",pass:"Drucker und Bambuddy befinden sich im selben Subnetz.",warn:"Der Drucker ({{printer_ip}}) und Bambuddy ({{host_ip}}) befinden sich in unterschiedlichen Subnetzen. Sie können sich möglicherweise nicht erreichen, sofern kein Routing zwischen den Subnetzen konfiguriert ist.",skip:"Subnetz konnte nicht ermittelt werden — übersprungen."},mqtt_auth:{title:"Drucker-Zugangsdaten",pass:"Der Drucker hat die Verbindung akzeptiert.",fail:"Der Drucker ist erreichbar, hat die Verbindung aber abgelehnt. Der Zugangscode oder die Seriennummer ist höchstwahrscheinlich falsch. Der Zugangscode ändert sich bei jedem Umschalten des Entwicklermodus — kopieren Sie ihn erneut vom Druckerbildschirm.",skip:"Nicht geprüft — der Drucker konnte nicht erreicht werden."},developer_mode:{title:"LAN-Entwicklermodus",pass:"Der Entwicklermodus ist aktiviert.",fail:"Der Entwicklermodus ist am Drucker AUS. Aktivieren Sie ihn in den LAN-Einstellungen des Druckers — und bestätigen Sie mit OK. Ohne ihn starten Drucke nicht.",skip:"Konnte nicht geprüft werden — erfordert eine aktive Verbindung zum Drucker."},printer_publishing:{title:"Drucker sendet Statusmeldungen",pass:"Der Drucker sendet Statusmeldungen — AMS, Filamente und K-Profile werden korrekt zum Slicer gespiegelt.",fail:"Der MQTT-Broker hat die Verbindung akzeptiert, der Drucker sendet aber keine Statusmeldungen. Fast immer liegt eine falsche oder falsch geschriebene Seriennummer vor — das Topic device/<serial>/report unterscheidet Groß- und Kleinschreibung. Prüfen Sie die Seriennummer in den Druckereinstellungen gegen die Anzeige am Drucker.",skip:"Konnte nicht geprüft werden — erfordert eine aktive Verbindung zum Drucker."}}},systemHealth:{sectionTitle:"Systemzustand",sectionDescription:"Durchsucht aktuelle Logs nach bekannten Problemen, die du meist selbst beheben kannst, bevor daraus ein Support-Ticket wird.",rescan:"Erneut prüfen",clean:"Keine bekannten Probleme in den letzten {{times}} Log-Einträgen gefunden.",logUnavailable:"Die Protokollierung in Dateien ist deaktiviert, daher können keine Logs durchsucht werden. Aktiviere die Datei-Protokollierung, um diese Prüfung zu nutzen.",learnMore:"Lösung anzeigen",fixLabel:"Lösung:",occurrences:"{{times}}× aufgetreten — zuletzt um {{lastSeen}}",category:{layer8:"Das kannst du beheben",environment:"Umgebung",bug:"Bitte melden"},signature:{"ftp-auth-rejected":{name:"Drucker hat den Zugriffscode abgelehnt",cause:"Der Drucker hat die Anmeldung für die Dateiübertragung abgelehnt. Der Zugriffscode ist falsch oder hat sich nach dem Umschalten des Entwicklermodus geändert.",fix:"Kopiere den Zugriffscode erneut vom Druckerbildschirm (LAN-Einstellungen) und aktualisiere ihn in den Druckereinstellungen in Bambuddy."},"ftp-connection-timeout":{name:"Zeitüberschreitung bei der Dateiübertragung",cause:"Bambuddy konnte den Dateiübertragungs-Port des Druckers (FTPS 990) nicht erreichen. Der Port ist blockiert, oder der Drucker ist aus oder in einem anderen Subnetz.",fix:"Stelle sicher, dass Port 990 zwischen Bambuddy und dem Drucker nicht blockiert wird und beide im selben Netzwerk sind."},"ftp-ssl-error":{name:"Sicherer Dateiübertragungs-Handshake fehlgeschlagen",cause:"Der TLS-Handshake mit dem Dateiübertragungs-Server des Druckers ist fehlgeschlagen. Häufig liegt das an einer Firewall oder veralteter Drucker-Firmware.",fix:"Aktualisiere die Drucker-Firmware und prüfe, dass keine Firewall oder Proxy die Verbindung auf Port 990 abfängt."},"mqtt-connection-flapping":{name:"Druckerverbindung bricht ständig ab",cause:"Die Steuerverbindung (MQTT 8883) trennt und verbindet sich wiederholt — meist wegen einer schwachen Netzwerkverbindung oder eines teilweise blockierten Ports.",fix:"Prüfe das WLAN-Signal am Drucker, bevorzuge eine Kabelverbindung und stelle sicher, dass Port 8883 zuverlässig erreichbar ist."},"camera-connection-refused":{name:"Kamera-Stream nicht erreichbar",cause:"Die Live-Kamera war auf Port RTSPS 322 nicht erreichbar. Der Port ist blockiert, oder die Kamera bzw. die LAN-Liveansicht ist am Drucker deaktiviert.",fix:"Aktiviere Kamera und LAN-Liveansicht am Drucker und stelle sicher, dass Port 322 nicht blockiert ist. Das Drucken ist davon nicht betroffen."},"database-locked":{name:"Datenbank-Schreibkonflikte",cause:'Die SQLite-Datenbank meldet unter Last "database is locked"-Fehler — häufig beim Betrieb mehrerer Drucker gleichzeitig.',fix:"Stelle Bambuddy auf eine externe PostgreSQL-Datenbank um. Siehe die PostgreSQL-Anleitung in der Dokumentation."}}},vpDiagnostic:{title:"Einrichtungsprüfung — {{name}}",runButton:"Einrichtungsprüfung ausführen",running:"Einrichtungsprüfung läuft...",runFailed:"Einrichtungsprüfung konnte nicht ausgeführt werden: {{error}}",retry:"Erneut prüfen",overall:{ok:"Alle Prüfungen bestanden — dieser virtuelle Drucker ist korrekt eingerichtet.",warnings:"Der virtuelle Drucker sollte funktionieren, aber einige Punkte brauchen Aufmerksamkeit.",problems:"Es wurden Probleme gefunden, die erklären, warum der Slicer diesen virtuellen Drucker nicht sehen oder nutzen kann."},check:{enabled:{title:"Virtueller Drucker aktiviert",fail:"Dieser virtuelle Drucker ist ausgeschaltet. Schalten Sie ihn ein, damit er erkennbar wird."},running:{title:"Dienste laufen",fail:"Der virtuelle Drucker ist aktiviert, aber seine Dienste laufen nicht. Prüfen Sie das Bambuddy-Protokoll — meist stoppt sie ein Bind-IP-Konflikt oder ein Berechtigungsfehler."},bind_interface:{title:"Bind-Netzwerkschnittstelle",fail:'Die Bind-Schnittstelle ist nicht gesetzt oder existiert auf diesem Host nicht mehr. Wählen Sie im Dropdown "Bind-Schnittstelle" eine aktuelle Schnittstelle.'},access_code:{title:"Zugangscode gesetzt",fail:"Es ist kein Zugangscode gesetzt. Dem Slicer muss derselbe 8-stellige Zugangscode angegeben werden, den Sie hier festlegen."},target_printer:{title:"Zieldrucker",fail:"Es ist kein Zieldrucker ausgewählt. Der Proxy-Modus benötigt einen echten Drucker zum Weiterleiten.",warn:"Der Zieldrucker ist gerade offline — die Weiterleitung wird fortgesetzt, sobald er sich wieder verbindet."},port_ftps:{title:"Datei-Upload-Dienst (Port {{port}})",fail:"Auf Port {{port}} der Bind-IP lauscht nichts, daher kann der Slicer keine Dateien hochladen. Ursache ist meist ein Port-Konflikt auf dieser Schnittstelle."},port_mqtt:{title:"Steuerungsdienst (Port {{port}})",fail:"Auf Port {{port}} der Bind-IP lauscht nichts, daher kann der Slicer sich nicht verbinden oder den Status anzeigen."},port_bind:{title:"Erkennungsdienst (Port {{port}})",fail:"Auf Port {{port}} der Bind-IP lauscht nichts, daher schlägt der Erkennungs-Handshake des Slicers fehl."},certificate:{title:"TLS-Zertifikat",pass:"Zertifikat bereit. Stellen Sie sicher, dass das Bambuddy-CA-Zertifikat (oben) in den Vertrauensspeicher Ihres Slicers importiert ist.",fail:"Das TLS-Zertifikat für diesen virtuellen Drucker fehlt. Prüfen Sie, ob das Bambuddy-Datenverzeichnis beschreibbar ist."}}},bugReport:{logHealthSummary:"Bekannte Probleme in deinen Logs gefunden",logHealthIntro:"Aktuelle Logs entsprechen bekannten Problemen. Sieh dir die Lösungen unten an — sie zu beheben könnte dein Problem ohne Fehlerbericht lösen. Du kannst unten trotzdem einen Bericht senden.",title:"Fehler melden",description:"Beschreibung",descriptionPlaceholder:"Was ist schiefgelaufen? Bitte beschreiben Sie das Problem...",email:"E-Mail (optional)",emailPlaceholder:"ihre@email.de",emailPrivacy:"Falls angegeben, wird Ihre E-Mail in einem eingeklappten Abschnitt des GitHub-Issues aufgeführt, damit der Betreuer sich melden kann.",screenshot:"Screenshot",uploadOrPaste:"Bild hochladen, einfügen oder ziehen",dataCollectedSummary:"Welche Daten werden im Bericht gesendet?",dataIncluded:"Enthalten:",dataIncludedList:"App-Version, Betriebssystem, Architektur, Python-Version, Datenbankstatistiken (nur Anzahl), Druckermodelle, Düsenanzahl, Firmware-Versionen, Verbindungsstatus, Integrationsstatus (Spoolman, MQTT, HA), nicht-sensible Einstellungen, Netzwerkschnittstellenanzahl, Docker-Details, Abhängigkeitsversionen.",dataNeverIncluded:"Nie enthalten:",dataNeverIncludedList:"Druckernamen, Seriennummern, Zugangscodes, Passwörter, IP-Adressen, E-Mail-Adressen, API-Schlüssel, Tokens, Webhook-URLs, Hostnamen oder Benutzernamen.",submit:"Absenden",startLogging:"Debug-Protokollierung starten",stepEnableLogging:"Debug-Protokollierung aktiviert",stepReproduce:"Problem jetzt reproduzieren",stepStopLogging:"Stoppen & Bericht senden",stopAndSubmit:"Stoppen & Senden",maxDuration:"Stoppt automatisch nach {{minutes}} Min.",stoppingLogs:"Protokolle sammeln & senden...",submitting:"Fehlerbericht wird gesendet...",submittingStepConnection:"Drucker-Verbindungsprüfungen werden ausgeführt",submittingStepVirtualPrinters:"Setup-Prüfungen für virtuelle Drucker werden ausgeführt",submittingStepLogScan:"Aktuelle Protokolle werden auf bekannte Probleme überprüft",submittingStepSubmit:"Bericht wird an GitHub gesendet",submitSuccess:"Fehlerbericht erfolgreich gesendet!",submitFailed:"Fehlerbericht konnte nicht gesendet werden",diagnosticChecking:"Druckerverbindungen werden geprüft...",diagnosticHealthy:"Verbindungsprüfung bestanden — keine Probleme an Ihren Druckern gefunden.",diagnosticSummary:"{{problems}} von {{total}} Druckern haben Verbindungsprobleme",diagnosticIntro:"Einer oder mehrere Drucker haben ein Verbindungsproblem, das die Ursache Ihres Problems sein könnte. Klappen Sie einen Drucker unten auf, um die Lösung zu sehen — sie zu beheben könnte das Problem ohne Fehlerbericht lösen. Sie können unten dennoch einen Bericht senden.",thankYou:"Vielen Dank!",submitted:"Ihr Fehlerbericht wurde eingereicht.",viewIssue:"Issue ansehen",unexpectedError:"Ein unerwarteter Fehler ist aufgetreten"},failureDetection:{title:"KI-Fehlererkennung",description:"Überwacht Drucke über eine selbst gehostete Obico-ML-API und reagiert automatisch auf erkannte Fehldrucke.",mlUrl:"Obico-ML-API-URL",mlUrlHint:"Basis-URL deines selbst gehosteten Obico-ml_api-Containers (z. B. http://192.168.1.10:3333).",test:"Testen",testSuccess:"ML-API erreichbar und funktionsfähig.",testFailed:"ML-API konnte nicht erreicht werden.",sensitivity:"Empfindlichkeit",sensitivityLow:"Niedrig (weniger Fehlalarme)",sensitivityMedium:"Mittel (ausgewogen)",sensitivityHigh:"Hoch (frühe Erkennung, mehr Fehlalarme)",sensitivityHint:"Passt die Konfidenz-Schwellwerte an, die Warnungen und Fehler auslösen.",action:"Aktion bei erkanntem Fehler",actionNotify:"Nur benachrichtigen",actionPause:"Druck pausieren",actionPauseOff:"Pausieren und Strom abschalten",pollInterval:"Prüfintervall (Sekunden)",pollIntervalHint:"Wie oft jeder Drucker während eines laufenden Drucks geprüft wird. Minimum 5 s, Maximum 120 s.",externalUrlMissing:"Externe URL ist nicht gesetzt.",externalUrlHint:"Die ML-API ruft das Kamera-Snapshot per URL ab. Setze die externe URL in den allgemeinen Einstellungen, damit der ML-API-Container Bambuddy erreichen kann.",perPrinterTitle:"Überwachte Drucker",perPrinterHint:"Wähle, welche Drucker vom Erkennungsdienst überwacht werden.",monitorAll:"Alle verbundenen Drucker überwachen",statusTitle:"Status",serviceRunning:"Dienst läuft",thresholds:"Niedrig / Hoch-Schwellwerte",activePrinters:"Aktive Drucke",noActivePrints:"Derzeit laufen keine Drucke.",historyTitle:"Letzte Erkennungen",noHistory:"Noch keine Erkennungen."},makerworld:{title:"MakerWorld",description:"Füge eine MakerWorld-Modell-URL ein, um es direkt aus Bambuddy zu importieren und zu drucken — ohne die Bambu Handy App zu öffnen.",pasteUrlHeader:"Von MakerWorld importieren",pasteUrlPlaceholder:"https://makerworld.com/de/models/… oder beliebigen MakerWorld-Link einfügen",resolveButton:"Laden",signInRequiredTitle:"Bambu-Cloud-Anmeldung für Download erforderlich",signInRequiredBody:"Modell-Details können anonym angezeigt werden, aber MakerWorld verlangt eine Bambu-Cloud-Anmeldung zum Herunterladen der 3MF-Dateien.",openCloudSettings:"Cloud-Einstellungen öffnen",untitledModel:"Unbenanntes Modell",byCreator:"von {{name}}",downloadsCount:"{{count}} Downloads",licensePrefix:"Lizenz",alreadyImported:"Bereits in Bibliothek",openOnMakerworld:"Auf MakerWorld öffnen",alreadyInLibrary:"Dieses Modell ist bereits in deiner Bibliothek — zu finden im Dateimanager → MakerWorld",importSuccess:"{{filename}} importiert — gespeichert im Dateimanager → MakerWorld",platesHeader:"Platten ({{count}})",plateDefaultName:"Platte {{n}}",materialCount:"{{count}} Filamente",amsRequired:"AMS erforderlich",slicedFor:"Gesliced für {{printer}}",alsoCompatible:"Auch kompatibel: {{printers}}",importToLibrary:"Speichern",sliceIn:"Speichern & in {{slicer}} öffnen",disclaimer:"Die MakerWorld-Integration verwendet von der Community dokumentierte API-Endpunkte. Bambuddy ist nicht mit MakerWorld oder Bambu Lab verbunden oder von diesen unterstützt.",lastImportSuccess:"In deine Bibliothek importiert",lastImportAlreadyInLibrary:"Bereits in deiner Bibliothek",viewInLibrary:"Im Dateimanager anzeigen",openInBambuStudio:"In Bambu Studio öffnen",openInOrcaSlicer:"In OrcaSlicer öffnen",importTo:"In Dateimanager importieren",recentImportsHeader:"Zuletzt importiert",phaseResolving:"Auflösen",phaseDownloading:"Lade herunter",folderAuto:"MakerWorld (Standard)",importAll:"Alle importieren",importAllProgress:"Importiere {{current}}/{{total}}",openGallery:"Bildergalerie öffnen",galleryPrev:"Vorheriges Bild",galleryNext:"Nächstes Bild",deleteImport:"Aus Bibliothek entfernen",importDeleting:"Wird entfernt…",importDeleted:"Aus Bibliothek entfernt",confirmDelete:"{{filename}} aus der Bibliothek entfernen? Die lokale Datei wird gelöscht, die Platte kann aber erneut von MakerWorld importiert werden.",errors:{resolveFailed:"Diese MakerWorld-URL konnte nicht aufgelöst werden.",downloadFailed:"Download fehlgeschlagen. Bitte erneut versuchen.",deleteFailed:"Datei konnte nicht aus der Bibliothek entfernt werden."}},gcodeViewer:{back:"Zurück",backToArchives:"Zurück zum Druckarchiv",backToFiles:"Zurück zum Dateimanager"},libraryTrash:{title:"Papierkorb",headerButton:"Papierkorb",headerTooltip:"In den Papierkorb verschobene Dateien anzeigen",backToFiles:"Zurück zum Dateimanager",subtitleAdmin:"Gelöschte Dateien bleiben {{days}} Tage hier und werden dann automatisch entfernt. Diese Ansicht zeigt Papierkorb-Dateien aller Benutzer.",subtitleUser:"Gelöschte Dateien bleiben {{days}} Tage hier und werden dann automatisch entfernt.",loading:"Papierkorb wird geladen…",loadError:"Papierkorb konnte nicht geladen werden.",empty:"Der Papierkorb ist leer.",summary:"{{count}} Dateien · {{size}}",emptyTrash:"Papierkorb leeren",restore:"Wiederherstellen",purgeNow:"Jetzt löschen",autoPurgeIn:"Wird in {{when}} gelöscht",days:"Tage",retentionLabel:"Automatisch löschen nach",selectAll:"Alle auswählen",selectOne:"{{filename}} auswählen",selectionCount:"{{count}} ausgewählt",bulkRestore:"Auswahl wiederherstellen",bulkPurge:"Auswahl löschen",col:{filename:"Datei",folder:"Ordner",size:"Größe",deleted:"Verschoben",autoPurge:"Löschung",owner:"Besitzer",actions:"Aktionen"},confirm:{purgeTitle:"Endgültig löschen?",purgeBody:"{{filename}} wird von der Festplatte gelöscht und kann nicht wiederhergestellt werden.",emptyTitle:"Papierkorb leeren?",emptyBody:"Alle {{count}} Dateien werden endgültig von der Festplatte gelöscht.",bulkPurgeTitle:"Ausgewählte Dateien endgültig löschen?",bulkPurgeBody:"Die {{count}} ausgewählten Dateien werden von der Festplatte gelöscht und können nicht wiederhergestellt werden.",cta:"Endgültig löschen"},toast:{restored:"Datei wiederhergestellt.",restoreFailed:"Datei konnte nicht wiederhergestellt werden.",purged:"Datei endgültig gelöscht.",purgeFailed:"Datei konnte nicht gelöscht werden.",emptied:"{{count}} Datei(en) aus dem Papierkorb gelöscht.",emptyFailed:"Papierkorb konnte nicht geleert werden.",retentionSaved:"Automatisches Löschen auf {{days}} Tage gesetzt.",retentionFailed:"Einstellung konnte nicht gespeichert werden.",bulkRestored:"{{count}} Datei(en) wiederhergestellt.",bulkPurged:"{{count}} Datei(en) gelöscht."}},libraryPurge:{title:"Alte Dateien entfernen",headerButton:"Alte entfernen",headerTooltip:"Alte Dateien im Block in den Papierkorb verschieben",description:"Räume alte Dateien in einem Rutsch aus deiner Bibliothek. Dateien mit Druckverlauf werden nach dem letzten Druckdatum bewertet; nie gedruckte Dateien nach dem Upload-Datum.",ageLabel:"Dateien älter als",days:"Tage",includeNeverPrinted:"Dateien einbeziehen, die nie gedruckt wurden",effectsTitle:'Was passiert, wenn du auf „Entfernen" klickst',effect1:"Passende Dateien werden in den Papierkorb verschoben — noch nicht von der Festplatte gelöscht.",effect2:"Du kannst sie bis zum Ablauf der Aufbewahrungsfrist jederzeit wiederherstellen.",effect3:"Nach Ablauf der Frist löscht der Papierkorb-Sweeper sie endgültig von der Festplatte.",effect4:"Dateien in externen (verknüpften) Ordnern werden übersprungen — Bambuddy löscht keine Bytes, die ihm nicht gehören.",previewLoading:"Prüfe, wie viele Dateien passen…",previewFailed:"Vorschau konnte nicht geladen werden.",previewSummary:"{{count}} Dateien · {{size}} würden in den Papierkorb verschoben",andMore:"…und {{count}} weitere",warning:"Dateien im Papierkorb zählen weiterhin zum Speicher, bis die Aufbewahrungsfrist abgelaufen ist. Leere den Papierkorb danach, um sofort Speicher freizugeben.",confirmCta:"{{count}} in den Papierkorb verschieben",purging:"Wird verschoben…",toast:{success:"{{count}} Datei(en) in den Papierkorb verschoben.",failed:"Dateien konnten nicht verschoben werden."}},libraryAutoPurge:{enableLabel:"Alte Dateien automatisch entfernen",enableDescription:"Führt die Admin-Bereinigung einmal pro Tag aus. Dateien landen zuerst im Papierkorb — sie werden nicht sofort gelöscht.",ageLabel:"Dateien älter als",ageDescription:"Minimum 7 Tage, Maximum 10 Jahre. Verwendet dieselbe Altersregel wie die manuelle „Alte entfernen“-Schaltfläche.",days:"Tage",includeNeverPrinted:"Dateien einbeziehen, die nie gedruckt wurden",saveFailed:"Einstellungen konnten nicht gespeichert werden."},archivePurge:{headerButton:"Alte löschen",headerTooltip:"Alte Archive in einem Rutsch löschen",title:"Alte Archive löschen",description:"Räume alte Druckhistorie auf. Jedes Archiv wird nach seinem letzten abgeschlossenen Druck bewertet — ein erneuter Druck setzt die Frist zurück, aktive Arbeit bleibt sicher.",ageLabel:"Archive löschen, die zuletzt gedruckt wurden vor",days:"Tage",effectsTitle:'Was passiert, wenn du auf „Löschen" klickst',effect1:"Jedes passende Archiv wird aus der Listenansicht ausgeblendet und seine Dateien werden von der Festplatte entfernt (3MF, Vorschau, Timelapse, Quell-3MF, F3D, Fotos).",effect2:"Die Archivzeile bleibt in der Datenbank, damit die Quick Stats den Filament-, Zeit-, Kosten- und Energiebeitrag behalten — wie der Standard beim Einzel-Löschen.",effect3:'Aktiviere unten „Auch aus Statistiken entfernen", um zusätzlich den Quick-Stats-Beitrag zu verwerfen (entspricht dem Einzel-Löschen-Häkchen). Dieser Pfad ist unwiderruflich.',effect4:"Ein erneuter Druck setzt die Frist zurück, Archive, die du weiterhin nutzt, bleiben sicher.",purgeStatsLabel:"Auch aus Statistiken entfernen",purgeStatsHint:"Verwirft die passenden Archive aus den Quick Stats (Filament, Zeit, Kosten, Energie). Ohne diese Option behalten die Quick Stats jeden Beitrag und nur die Dateien werden gelöscht.",previewLoading:"Prüfe passende Archive…",previewFailed:"Vorschau konnte nicht erstellt werden.",previewSummary:"{{count}} Archive · {{size}} würden entfernt",andMore:"…und {{count}} weitere",warning:"Dateien werden von der Festplatte entfernt und können nicht wiederhergestellt werden. Lade wichtige Archive vorher herunter oder markiere sie als Favorit.",confirmCta:"{{count}} Archiv(e) entfernen",purging:"Entferne…",toast:{success:"{{count}} Archiv(e) entfernt.",failed:"Archive konnten nicht gelöscht werden."}},archiveAutoPurge:{enableLabel:"Alte Archive automatisch löschen",enableDescription:"Blendet einmal pro Tag Archive aus der Listenansicht aus und entfernt ihre Dateien von der Festplatte, wenn sie im angegebenen Zeitraum nicht gedruckt wurden. Ein erneuter Druck setzt die Frist zurück.",ageLabel:"Archive automatisch löschen, die zuletzt gedruckt wurden vor",ageDescription:"Minimum 7 Tage, Maximum 10 Jahre. Basiert auf dem letzten abgeschlossenen Druck — ein erneuter Druck setzt die Frist zurück. Entfernt 3MF, Vorschau, Timelapse, Quell-3MF, F3D und Fotos.",days:"Tage",purgeStatsLabel:"Auch aus Statistiken entfernen",purgeStatsDescription:"Wenn aktiviert, verwirft der tägliche Sweeper auch den Quick-Stats-Beitrag (Filament, Zeit, Kosten, Energie) jedes gelöschten Archivs. Standard aus — Quick Stats behalten den Beitrag, nur die Dateien werden gelöscht.",runNow:"Archive jetzt löschen",saveFailed:"Einstellungen konnten nicht gespeichert werden."},cameraTokens:{title:"Kamera-API-Tokens",navTitle:"Kamera-API-Tokens",description:"Langlebige Tokens zum Einbetten des Kamerastreams in Home Assistant, Frigate, Kioske oder andere Tools, die eine stabile URL benötigen. Jeder Token ist nur für den Kamerastream und kann jederzeit widerrufen werden.",loading:"Laden…",confirmRevoke:{title:"Dieses Token widerrufen?",body:'Jedes Gerät, das "{{name}}" verwendet, verliert sofort den Zugriff. Dies kann nicht rückgängig gemacht werden.',cancel:"Abbrechen",confirm:"Widerrufen"},create:{title:"Neues Token erstellen",nameLabel:"Token-Name",namePlaceholder:"z. B. Home Assistant",daysLabel:"Tage bis Ablauf",submit:"Erstellen",hint:"Maximale Lebensdauer 365 Tage. Der Token-Wert wird nur einmal bei der Erstellung angezeigt – jetzt kopieren."},created:{title:"Token erstellt – jetzt kopieren",warning:"Dies ist das einzige Mal, dass dieser Token sichtbar ist. Nach dem Schließen dieses Dialogs können Sie ihn nie wieder anzeigen.",copy:"Kopieren",dismiss:"Ich habe es gespeichert"},list:{myTitle:"Meine Tokens",allTitle:"Alle Benutzer (Admin-Ansicht)",empty:"Noch keine Tokens.",name:"Name",owner:"Eigentümer",prefix:"Präfix",created:"Erstellt",expires:"Läuft ab",lastUsed:"Zuletzt verwendet",revoke:"Widerrufen",expired:"Abgelaufen"},toast:{created:"Token erstellt",createFailed:"Token konnte nicht erstellt werden",revoked:"Token widerrufen",revokeFailed:"Token konnte nicht widerrufen werden",loadFailed:"Tokens konnten nicht geladen werden",copied:"In Zwischenablage kopiert",copyFailed:"Kopieren fehlgeschlagen – manuell auswählen und kopieren"}},forecast:{title:"Bestandsprognose",noSpools:"Keine aktiven Spulen gefunden. Fügen Sie Spulen zu Ihrem Inventar hinzu, um Prognosedaten zu sehen.",noUsageData:"Keine Verbrauchsdaten verfügbar — die Bestandszeitlinie kann nicht projiziert werden.",sku:"SKU",material:"Material",stock:"Bestand",dailyRate:"Rate",daysLeft:"Verbleibende Tage",emptyBy:"Aufgebraucht am",reorderBy:"Nachbestellen bis",actions:"Aktionen",trend:"Trend",estimated:"Gesch.",noData:"Keine Daten",timeframe:"Zeitraum",chartTitle:"Bestandsprognose — Top 5 Materialien",dashedLinesROP:"Gestrichelte Linien = Nachbestellpunkte",stockLevel:"Bestandsniveau",reorderPoint:"Nachbestellpunkt",safetyMargin:"Sicherheitspuffer",trendLegend:"Trend (verlaufsbasiert, 95 % Serviceniveau)",estimatedLegend:"Geschätzt (Gewichtsdelta)",noDataLegend:"Keine Daten",ropLabel:"NBP",ssLabel:"SB",safetyStockLegend:"Sicherheitsbestand",stockArrivalLegend:"Wareneingang",stockoutLegend:"Fehlbestand",alertCount_one:"{{count}} Warnung",alertCount_other:"{{count}} Warnungen",order:"Bestellen",globalLeadTime:"Globale Lieferzeit",globalLeadTimeHint:"Globale Lieferzeitvorgabe — wird in der Nachbestellpunktberechnung für alle SKUs verwendet",save:"Speichern",cancel:"Abbrechen",settingsSaved:"Einstellungen gespeichert",failedSaveSettings:"Einstellungen konnten nicht gespeichert werden",globalLeadTimeSaved:"Globale Lieferzeit gespeichert",skuLeadTimeOverride:"SKU-Lieferzeitüberschreibung",skuLeadTimeHint:"0 = globale Lieferzeit verwenden. Größer 0 setzen, um für diesen SKU zu überschreiben.",safetyMarginLabel:"Sicherheitspuffer",effectiveLeadTime:"Effektive Lieferzeit",effectiveLeadTimeHint:"max(global {{global}}T, SKU {{sku}}T)",reorderPointHint:"d̄ × LT + safety margin — bei diesem Bestand bestellen",safetyMarginHint:"Statistischer Sicherheitsbestand (z=1,65 × σ × √LT) + benutzerdefinierter Puffer",safetyMarginHintDays:"Zusätzlicher Puffer auf den statistischen Sicherheitsbestand.{{approx}}",safetyMarginHintDaysApprox:" ≈ {{g}}g beim aktuellen Verbrauch.",safetyMarginHintG:"Fester Gewichtspuffer auf den statistischen Sicherheitsbestand.{{approx}}",safetyMarginHintGApprox:" ≈ {{days}}d beim aktuellen Verbrauch.",individualSpools:"Einzelne Spulen",labelWeight:"Etikett",spoolCount_one:"{{count}} Spule",spoolCount_other:"{{count}} Spulen",stockBreakRisk:"Bestandsunterbrechungsrisiko",stockBreakBefore:"Bestandsunterbrechung vor Auffüllung",stockBreakDetail:"{{days}}d verbleibend, Lieferzeit {{lt}}d.",reorderNow:"Jetzt nachbestellen",reorderTriggerPassed:"Auslösedatum {{date}} ist überschritten.",shoppingList:"Einkaufsliste",shoppingListItems_one:"({{count}} Artikel)",shoppingListItems_other:"({{count}} Artikel)",shoppingListEmpty:"Einkaufsliste ist leer. Klicken Sie auf das Warenkorbsymbol in einer Zeile, um Artikel hinzuzufügen.",addToCart:"Zur Einkaufsliste hinzufügen",alertsSnoozed:"Benachrichtigungen für diese SKU stummschalten",alertsEnabled:"Benachrichtigungen für diese SKU aktivieren",addedToCart:"Zur Einkaufsliste hinzugefügt",failedAddItem:"Artikel konnte nicht hinzugefügt werden",listView:"Liste",logisticsView:"Logistik",qty:"Menge",weight:"Gewicht",leadTime:"Lieferzeit",expectedRestock:"Erwartete Auffüllung",status:"Status",note:"Notiz",pending:"Ausstehend",purchased:"Bestellt",received:"Erhalten",markPurchased:"Als bestellt markieren",markReceived:"Als erhalten markieren — fügt Spulen dem Lagerbestand hinzu",resetToPending:"Auf ausstehend zurücksetzen",remove:"Entfernen",clearAll:"Alle löschen",downloadCsv:"CSV",addToCartTitle:"Zur Einkaufsliste hinzufügen",byQuantity:"Nach Menge",byDuration:"Nach Dauer",numberOfSpools:"Anzahl der Spulen",lastHowManyDays:"Wie viele Tage soll es reichen?",noUsageQty:"Keine Verbrauchsdaten — Menge auf 1 gesetzt.",noteOptional:"Notiz (optional)",notePlaceholder:"z. B. für Projekt X, dringend…",addNSpools_one:"{{count}} Spule hinzufügen",addNSpools_other:"{{count}} Spulen hinzufügen",onArrival:"Bei Ankunft",stockBreakIn:"Bestandsunterbrechung in {{days}}d.",stockRunsOutBefore:"Bestand läuft vor Ablauf der {{lt}}d Lieferzeit aus.",atRate:"Bei {{rate}}g/Tag benötigen Sie",moreSpools_one:"{{count}} weitere Spule",moreSpools_other:"{{count}} weitere Spulen",bridgeGap:"um die Lücke zu überbrücken.",noReadAccess:"Sie haben keine Berechtigung, Bestandsprognosen anzuzeigen.",noWriteAccess:"Sie haben keine Berechtigung, Prognoseeinstellungen zu ändern."}},vpe={nav:{printers:"Impresoras",archives:"Archivos",queue:"Cola de impresión",stats:"Estadísticas",profiles:"Perfiles",maintenance:"Mantenimiento",projects:"Proyectos",inventory:"Filamento",files:"Gestor de archivos",makerworld:"MakerWorld",notifications:"Notificaciones",settings:"Ajustes",system:"Sistema",collapseSidebar:"Contraer barra lateral",expandSidebar:"Expandir barra lateral",update:"Actualizar",updateAvailable:"Actualización disponible: v{{version}}",updateAvailableBanner:"¡La versión {{version}} está disponible!",viewUpdate:"Ver actualización",viewOnGithub:"Ver en GitHub",keyboardShortcuts:"Atajos de teclado (?)",switchToLight:"Cambiar a modo claro",switchToDark:"Cambiar a modo oscuro",switchToSystem:"Cambiar a modo del sistema",smartSwitches:"Interruptores inteligentes",logout:"Cerrar sesión",installApp:"Instalar app",installAppSuccess:"Bambuddy se ha instalado"},common:{save:"Guardar",saving:"Guardando...",cancel:"Cancelar",delete:"Eliminar",edit:"Editar",add:"Añadir",close:"Cerrar",confirm:"Confirmar",loading:"Cargando...",error:"Error",errorLoading:"Error al cargar los datos",retry:"Reintentar",success:"Éxito",warning:"Advertencia",enabled:"Activado",disabled:"Desactivado",yes:"Sí",no:"No",on:"Encendido",off:"Apagado",all:"Todos",none:"Ninguno",search:"Buscar",filter:"Filtrar",sort:"Ordenar",refresh:"Actualizar",download:"Descargar",upload:"Subir",uploading:"Subiendo...",uploadFailed:"Error al subir",actions:"Acciones",status:"Estado",name:"Nombre",description:"Descripción",date:"Fecha",time:"Hora",hours:"horas",minutes:"minutos",seconds:"segundos",days:"días",enable:"Activar",disable:"Desactivar",permissions:"Permisos",noPrinters:"No hay impresoras configuradas",noData:"No hay datos disponibles",linkNotFound:"Enlace no encontrado",required:"Obligatorio",optional:"Opcional",dismiss:"Descartar",apply:"Aplicar",reset:"Restablecer",export:"Exportar",import:"Importar",clear:"Borrar",selectAll:"Seleccionar todo",deselectAll:"Deseleccionar todo",noChange:"— Sin cambios —",unchanged:"Sin cambios",unassigned:"Sin asignar",unknown:"Desconocido",unknownError:"Error desconocido",today:"Hoy",tomorrow:"Mañana",asap:"Lo antes posible",overdue:"Atrasado",now:"Ahora",collapse:"Contraer",expand:"Expandir",viewArchive:"Ver archivo",viewInFileManager:"Ver en el gestor de archivos",addedBy:"Añadido por {{username}}",prints:"impresiones",more:"+{{count}} más",ascending:"Ascendente",descending:"Descendente",back:"Atrás",copy:"Copiar",copied:"¡Copiado!",printer:"Impresora",remove:"Quitar",type:"Tipo",print:"Imprimir",rename:"Renombrar",move:"Mover",create:"Crear",duplicate:"Duplicar",left:"Izquierda",right:"Derecha"},printers:{addPreflight:{checking:"Comprobando la conexión...",warning:"Algunas comprobaciones de conexión fallaron. Esta impresora podría aparecer como desconectada. Revisa las comprobaciones de abajo, soluciona lo que puedas o guárdala de todos modos.",back:"Atrás",saveAnyway:"Guardar de todos modos"},title:"Impresoras",addPrinter:"Añadir impresora",editPrinter:"Editar impresora",deletePrinter:"Eliminar impresora",printerName:"Nombre de la impresora",serialNumber:"Número de serie",ipAddress:"Dirección IP / Nombre de host",accessCode:"Código de acceso",model:"Modelo",nozzleCount:"Número de boquillas",autoArchive:"Archivado automático",status:{available:"Disponible",idle:"Inactiva",printing:"Imprimiendo",paused:"En pausa",offline:"Desconectada",problem:"Problema",error:"Error",finished:"Finalizada",unknown:"Desconocido"},temperatures:{nozzle:"Boquilla",bed:"Cama",chamber:"Cámara"},progress:"{{percent}}% completado",timeRemaining:"{{time}} restante",deleteConfirm:'¿Está seguro de que desea eliminar "{{name}}"?',maintenanceOk:"Mantenimiento correcto",maintenanceWarning:"{{count}} advertencia",maintenanceWarning_plural:"{{count}} advertencias",maintenanceDue:"{{count}} pendiente",maintenanceDue_plural:"{{count}} pendientes",sort:{name:"Nombre",status:"Estado",model:"Modelo",location:"Ubicación",ascending:"Orden ascendente",descending:"Orden descendente"},cardSize:{small:"Tarjetas pequeñas",medium:"Tarjetas medianas",large:"Tarjetas grandes",extraLarge:"Tarjetas extragrandes"},hideOffline:"Ocultar desconectadas",nextAvailable:"Próxima disponible",powerOn:"Encender",offlinePrintersWithPlugs:"Impresoras desconectadas con enchufes inteligentes",noPrintersConfigured:"Aún no hay impresoras configuradas",search:"Buscar impresoras...",noSearchResults:"Ninguna impresora coincide con su búsqueda o filtros",filter:{allStatuses:"Todos los estados",allLocations:"Todas las ubicaciones"},toolbar:{filters:"Filtros",view:"Vista",actions:"Acciones"},readyToPrint:"Lista para imprimir",external:"Externo",extL:"Ext-L",extR:"Ext-R",deleteArchives:"Eliminar archivos de impresión",noLabel:"Sin etiqueta",printPreview:"Vista previa de impresión",width:"Anchura",height:"Altura",noObjectsFound:"No se encontraron objetos",objectsLoadedOnPrintStart:"Los objetos se cargan al iniciar una impresión",willBeSkipped:"Se omitirá",name:"Nombre",serialCannotBeChanged:"El número de serie no se puede cambiar",locationHelp:"Se usa para agrupar impresoras y filtrar trabajos en cola",wifiSignal:{veryWeak:"Muy débil",weak:"Débil",fair:"Aceptable",good:"Buena",excellent:"Excelente"},maintenanceUpToDate:"Todo el mantenimiento al día - Haga clic para ver",chamberLightOn:"Encender luz de la cámara",chamberLightOff:"Apagar luz de la cámara",files:"Archivos",browseFiles:"Explorar archivos de la impresora",autoOffAfterPrint:"Apagado automático tras la impresión",autoOffExecuted:"Se ejecutó el apagado automático - encienda la impresora para restablecer",hmsErrors:"Errores HMS",viewHmsErrors:"Ver {{count}} error(es) HMS",resume:"Reanudar",pause:"Pausar",stop:"Detener",camera:"Cámara",skipObject:"Omitir objeto",reconnect:"Reconectar",forceRefresh:"Forzar actualización",forceRefreshSuccess:"Actualización solicitada",mqttDebug:"Depuración MQTT",printerInformation:"Información de la impresora",copyToClipboard:"Copiar",copied:"¡Copiado!",state:"Estado",wifiSignalLabel:"Señal Wi-Fi",developerMode:"Modo desarrollador",enabled:"Activado",disabled:"Desactivado",addedOn:"Añadida",sdCard:"Tarjeta SD",inserted:"Insertada",notInserted:"No insertada",totalPrintHours:"Horas de impresión",activeNozzle:"Activa: boquilla {{nozzle}}",nozzleRack:"Soporte de boquillas",nozzleDocked:"Acoplada",nozzleMounted:"Montada",nozzleActive:"Activa",nozzleIdle:"Inactiva",nozzleDiameter:"Diámetro",nozzleType:"Tipo",nozzleStatus:"Estado",nozzleFilament:"Filamento",nozzleWear:"Desgaste",nozzleMaxTemp:"Temp. máx.",nozzleSerial:"Serie",nozzleHardenedSteel:"Acero endurecido",nozzleStainlessSteel:"Acero inoxidable",nozzleTungstenCarbide:"Carburo de tungsteno",nozzleFlow:"Flujo",nozzleHighFlow:"Flujo alto",nozzleStandardFlow:"Estándar",firmwareUpdate:"Actualización de firmware",firmwareInstructions:"En la pantalla táctil de la impresora, vaya a",firmwareNav:"Navegue hasta",settings:"Ajustes",firmware:"Firmware",discoverPrinters:"Detectar impresoras",searching:"Buscando...",manualEntry:"Entrada manual",addFromCloud:"Añadir desde la nube",toast:{printerDeleted:"Impresora eliminada",missingSpoolAssignment:"Impresión iniciada en {{printer}}. Falta la asignación de bobina para: {{slots}}",printerAdded:"Impresora añadida",printerUpdated:"Impresora actualizada",failedToDelete:"Error al eliminar la impresora",failedToAdd:"Error al añadir la impresora",connectionFailedNotAdded:"No se pudo conectar con la impresora. Verifique la IP, el número de serie y el código de acceso, y confirme que el modo solo LAN está activado. La impresora no se añadió.",failedToUpdate:"Error al actualizar la impresora",commandSent:"Comando enviado",failedToSendCommand:"Error al enviar el comando",turnedOn:"{{name}} encendida",failedToPowerOn:"Error al encender {{name}}",scriptTriggered:"Script ejecutado",printStopped:"Impresión detenida",printPaused:"Impresión en pausa",printResumed:"Impresión reanudada",referenceDeleted:"Referencia eliminada",detectionAreaSaved:"Área de detección guardada",failedToRunScript:"Error al ejecutar el script",failedToStopPrint:"Error al detener la impresión",failedToPausePrint:"Error al pausar la impresión",failedToResumePrint:"Error al reanudar la impresión",failedToControlChamberLight:"Error al controlar la luz de la cámara",failedToSetSpeed:"Error al establecer la velocidad de impresión",failedToUpdateSetting:"Error al actualizar el ajuste",failedToSkipObjects:"Error al omitir objetos",failedToRereadRfid:"Error al releer el RFID",failedToCheckPlate:"Error al comprobar la cama",failedToUpdateLabel:"Error al actualizar la etiqueta",failedToDeleteReference:"Error al eliminar la referencia",failedToSaveDetectionArea:"Error al guardar el área de detección",plateCheckEnabled:"Comprobación de cama activada",plateCheckDisabled:"Comprobación de cama desactivada",calibrationSaved:"¡Calibración guardada!",calibrationFailed:"Error en la calibración",rfidRereadInitiated:"Relectura de RFID iniciada",loadInitiated:"Cargando filamento…",unloadInitiated:"Descargando filamento…",failedToLoad:"Error al cargar el filamento",failedToUnload:"Error al descargar el filamento"},connection:{connected:"Conectada",offline:"Desconectada"},plateStatus:{markCleared:"Marcar cama como despejada",cleared:"Cama despejada",notCleared:"Cama no despejada",inUse:"Cama en uso"},queue:{inQueue:"{{count}} impresión en cola",inQueue_plural:"{{count}} impresiones en cola"},controls:"Controles",rfid:{reread:"Releer RFID"},ams:{load:"Cargar",unload:"Descargar"},bedJog:{title:"Mover la cama de impresión",bed:"Cama",step:"Paso (mm)",up:"Subir la cama",down:"Bajar la cama",disabledWhilePrinting:"Desactivado durante la impresión",notHomedTitle:"La impresora no está en posición de origen",notHomedMessage:"La impresora no se ha llevado a su posición de origen desde la última impresión. Ejecute el autoorigen primero para un posicionamiento seguro (estaciona el cabezal y luego lleva X, Y y Z al origen), o mueva de todos modos — los finales de carrera por software se omitirán.",homeZ:"Autoorigen",moveAnyway:"Mover de todos modos",homingStarted:"Llevando la impresora al origen…"},permission:{noAdd:"No tiene permiso para añadir impresoras",noEdit:"No tiene permiso para editar impresoras",noDelete:"No tiene permiso para eliminar impresoras",noControl:"No tiene permiso para controlar impresoras",noFiles:"No tiene permiso para acceder a los archivos de la impresora",noAmsRfid:"No tiene permiso para releer el RFID del AMS",noSmartPlugControl:"No tiene permiso para controlar enchufes inteligentes",noCamera:"No tiene permiso para ver las cámaras"},modal:{addTitle:"Añadir impresora",editTitle:"Editar impresora",myPrinter:"Mi impresora",selectModel:"Seleccionar modelo...",locationGroup:"Ubicación / Grupo (opcional)",locationPlaceholder:"p. ej., Taller, Oficina, Sótano",autoArchiveLabel:"Archivar automáticamente las impresiones completadas",fromPrinterSettings:"Desde los ajustes de la impresora",modelOptional:"Modelo (opcional)",saveChanges:"Guardar cambios"},skipObjects:{tooltip:"Omitir objetos",onlyWhilePrinting:"Omitir objetos (solo durante la impresión)",requiresMultiple:"Omitir objetos (requiere 2 o más objetos)",title:"Omitir objetos",matchIdsInfo:"Haga coincidir los ID con la pantalla de su impresora",printerShowsIds:"La pantalla de la impresora muestra los ID de los objetos en la cama de impresión",skipSelected:"Omitir seleccionados",skipping:"Omitiendo...",noObjectsSelected:"No hay objetos seleccionados",selectObjectsToSkip:"Seleccione los objetos que desea omitir de la impresión actual",skipped:"omitidos",objectsSkipped:"Objetos omitidos",activeCount:"{{count}} activos",waitForLayer:"Espere a la capa 2 o superior para omitir objetos (capa actual {{layer}})",skip:"Omitir",confirmTitle:"¿Omitir objeto?",confirmMessage:'¿Está seguro de que desea omitir "{{name}}"? Esto no se puede deshacer.'},confirm:{deleteTitle:"Eliminar impresora",deleteMessage:'¿Está seguro de que desea eliminar "{{name}}"? Esto eliminará todos los ajustes de conexión.',deleteArchivesNote:"Todo el historial de impresión de esta impresora se eliminará permanentemente.",keepArchivesNote:"El historial de impresión se conservará pero ya no estará asociado a esta impresora.",stopTitle:"Detener impresión",stopMessage:'¿Está seguro de que desea detener la impresión actual en "{{name}}"? Esto cancelará el trabajo de impresión.',stopButton:"Detener impresión",pauseTitle:"Pausar impresión",pauseMessage:'¿Está seguro de que desea pausar la impresión actual en "{{name}}"?',pauseButton:"Pausar impresión",resumeTitle:"Reanudar impresión",resumeMessage:'¿Está seguro de que desea reanudar la impresión en "{{name}}"?',resumeButton:"Reanudar impresión",powerOnTitle:"Encender impresora",powerOnMessage:'¿Está seguro de que desea ENCENDER "{{name}}"?',powerOnButton:"Encender",powerOffTitle:"Apagar impresora",powerOffMessage:'¿Está seguro de que desea APAGAR "{{name}}"?',powerOffWarning:'ADVERTENCIA: ¡"{{name}}" está imprimiendo actualmente! ¿Está seguro de que desea APAGARLA? Esto interrumpirá la impresión y podría dañar la impresora.',powerOffButton:"Apagar",haToggleTitle:'Conmutar "{{name}}"',haToggleMessage:"¿Conmutar la entidad de Home Assistant {{entity}}? Esto puede apagarla si está encendida actualmente.",haToggleWarning:'ADVERTENCIA: ¡"{{name}}" está imprimiendo actualmente! Conmutar {{entity}} puede cortar la corriente e interrumpir la impresión. ¿Continuar?',haToggleButton:"Conmutar"},bulk:{select:"Seleccionar",selectAll:"Seleccionar todo",selectByLocation:"Seleccionar por ubicación",selected:"{{count}} seleccionadas",actions:{stop:"Detener",pause:"Pausar",resume:"Reanudar",clearPlate:"Despejar cama",clearHMS:"Borrar notificaciones"},confirm:{stopTitle:"Detener {{count}} impresiones",stopMessage:"Esto cancelará las impresiones activas en {{count}} impresora(s). Esta acción no se puede deshacer.",stopButton:"Detener todo",pauseTitle:"Pausar {{count}} impresiones",pauseMessage:"Esto pausará las impresiones activas en {{count}} impresora(s).",pauseButton:"Pausar todo",clearPlateTitle:"Despejar {{count}} camas de impresión",clearPlateMessage:"Esto despejará la cama de impresión en {{count}} impresora(s) y puede activar trabajos en cola.",clearPlateButton:"Despejar todo"},success:"{{action}} completado en {{count}} impresora(s)",partial:"{{succeeded}} con éxito, {{failed}} con error",noneApplicable:"Ninguna de las impresoras seleccionadas está en el estado adecuado para esta acción",selectByState:"Seleccionar por estado"},discovery:{title:"Detectar impresoras",searching:"Buscando...",scanning:"Escaneando...",scanProgress:"Escaneando... {{scanned}}/{{total}}",foundPrinters:"Se encontraron {{count}} impresora(s)",noPrintersFound:"No se encontraron impresoras",noPrintersFoundSubnet:"No se encontraron impresoras en la subred especificada.",noPrintersFoundNetwork:"No se encontraron impresoras en la red.",allConfigured:"Todas las impresoras detectadas ya están configuradas.",alreadyAdded:"Ya añadida",select:"Seleccionar",manualEntry:"Entrada manual",addFromCloud:"Añadir desde la nube",subnetToScan:"Subred a escanear",dockerNote:"Docker detectado. Introduzca la subred de su impresora en notación CIDR. Requiere network_mode: host en docker-compose.yml.",scanSubnet:"Escanear subred en busca de impresoras",discoverNetwork:"Detectar impresoras en la red",scanningSubnet:"Escaneando la subred en busca de impresoras Bambu...",scanningNetwork:"Escaneando la red...",serialRequired:"Número de serie obligatorio",unknown:"Desconocido",failedToStart:"Error al iniciar la detección",customSubnetOption:"Subred personalizada...",customSubnetLabel:"Subred personalizada (CIDR)",customSubnetNote:"Usa una subred personalizada si tu impresora está en una red distinta a la de este servidor. Los puertos FTP (990) y MQTT (8883) deben ser accesibles a través del límite de enrutamiento."},drying:{start:"Iniciar secado",stop:"Detener secado",temperature:"Temperatura",duration:"Duración",hours:"horas",timeRemaining:"{{time}} restante",active:"Secando",notSupported:"Secado no compatible",powerRequired:"Conecte el adaptador de corriente del AMS para activar el secado",startingDrying:"Iniciando el secado...",stoppingDrying:"Deteniendo el secado...",rotateTray:"Girar la bobina durante el secado"},filaments:"Filamentos",openCameraOverlay:"Abrir la cámara superpuesta",openCameraWindow:"Abrir la cámara en una ventana nueva",firmwareUpdateAvailable:"Actualización de firmware disponible: {{current}} → {{latest}}",firmwareUpToDate:"Firmware {{version}} — Actualizado",firmwareUpdateButton:"Actualizar",plateDetection:{noPermission:"No tiene permiso para actualizar impresoras",enabledClick:"Comprobación de cama activada - Haga clic para desactivar",disabledClick:"Comprobación de cama desactivada - Haga clic para activar",manageCalibration:"Gestionar la calibración de detección de cama",calibrationRequired:"Calibración necesaria",calibrationInstructions:"Asegúrese de que la cama de impresión esté <strong>completamente vacía</strong> y luego haga clic en Calibrar.",calibrationDescription:"La calibración captura una imagen de referencia de la cama vacía. Las comprobaciones futuras se compararán con esta referencia para detectar objetos.",calibrationTip:"<strong>Consejo:</strong> puede almacenar hasta 5 calibraciones para distintas camas. El sistema usa automáticamente la mejor coincidencia al comprobar.",plateEmpty:"La cama parece estar vacía",objectsDetected:"Objetos detectados en la cama",confidence:"Confianza",difference:"Diferencia",analysisPreview:"Vista previa del análisis:",analysisLegend:"Recuadro verde = área de detección, Superposición roja = diferencias respecto a la calibración",savedReferences:"Referencias guardadas ({{count}}/{{max}})",deleteReference:"Eliminar referencia",labelPlaceholder:"Etiqueta...",clickToEdit:"{{label}} - Haga clic para editar",clickToAddLabel:"Haga clic para añadir una etiqueta"},speed:{title:"Velocidad de impresión",silent:"Silencioso (50%)",standard:"Estándar (100%)",sport:"Sport (124%)",ludicrous:"Ludicrous (166%)"},airduct:{title:"Modo de conducto de aire",cooling:"Refrigeración",heating:"Calentamiento"},noSdCard:"Sin SD",door:{open:"Abierta",closed:"Cerrada"},fans:{partCooling:"Ventilador de refrigeración de piezas",auxiliary:"Ventilador auxiliar",chamber:"Ventilador de la cámara"},clickToViewHmsErrors:"Haga clic para ver los errores HMS",estimatedCompletion:"Hora estimada de finalización",plateNumber:"Cama {{number}}",slotOptions:"Opciones de la ranura",amsPopup:{friendlyName:"Nombre del AMS",friendlyNamePlaceholder:"p. ej. Nombre descriptivo del AMS",serialNumber:"Número de serie",firmwareVersion:"Firmware",save:"Guardar",clear:"Borrar",noEditPermission:"No tiene permiso para renombrar unidades AMS"},firmwareModal:{title:"Actualización de firmware",titleUpToDate:"Información del firmware",currentVersion:"Actual:",latestVersion:"Más reciente:",releaseNotes:"Notas de la versión",checkingPrereqs:"Comprobando los requisitos previos...",sdCardReady:"Tarjeta SD lista. Haga clic abajo para subir el firmware.",uploadedSuccess:"¡Firmware subido a la tarjeta SD!",applyInstructions:"Para aplicar la actualización en su impresora:",step1:"En la pantalla táctil de la impresora, vaya a <strong>Ajustes</strong>",step2:"Navegue hasta <strong>Firmware</strong>",step3:"Seleccione <strong>Actualizar desde tarjeta SD</strong>",step4:"La actualización tardará entre 10 y 20 minutos",done:"Hecho",starting:"Iniciando...",uploadFirmware:"Subir firmware",uploadFailed:"Error al iniciar la subida: {{error}}",uploadedToast:"¡Firmware subido! Inicie la actualización desde la pantalla de la impresora.",availableVersions:"Versiones disponibles",usable:"Utilizable",unavailable:"No disponible",installed:"Instalada",newerBadge:"más reciente",olderBadge:"más antigua",currentBadge:"actual"},accessCodePlaceholder:"Dejar vacío para conservar el actual",roi:{title:"Área de detección (ROI)",xStart:"Inicio X",yStart:"Inicio Y",width:"Anchura",height:"Altura",instruction:"Ajuste el área de detección para centrarse en la cama de impresión. El recuadro verde de la vista previa muestra el área actual."},developerModeWarning:"El modo desarrollador LAN no está activado en: {{names}}. Es posible que algunas funciones no funcionen.",howToEnable:"Cómo activarlo",incompatibleFile:"Este archivo se laminó para {{slicedFor}}, pero esta impresora es una {{printerModel}}",dropNotPrintable:"Solo se pueden imprimir archivos .gcode y .gcode.3mf",dropToPrint:"Suelte para imprimir",cannotPrint:"Impresora ocupada"},archives:{title:"Archivos de impresión",searchPlaceholder:"Buscar archivos...",filterByPrinter:"Filtrar por impresora",filterByStatus:"Filtrar por estado",sortBy:"Ordenar por",sortNewest:"Más recientes primero",sortOldest:"Más antiguos primero",sortName:"Nombre",sortDuration:"Duración",sortLargest:"Mayores primero",sortSmallest:"Menores primero",sortSize:"Tamaño",noArchives:"No se encontraron archivos",noArchivesSearch:"Ningún archivo coincide con su búsqueda",originalPrintNotVisible:"La impresión original no está visible - pruebe a borrar los filtros",noArchivesYet:"Aún no hay archivos",prints:"impresiones",pagination:{showing:"Mostrando",to:"a",of:"de",show:"Mostrar",page:"Página",all:"Todos"},loadingArchives:"Cargando archivos...",releaseToUpload:"Suelte para subir",showAll:"Mostrar todos",showFavoritesOnly:"Mostrar solo favoritos",gridView:"Vista de cuadrícula",listView:"Vista de lista",calendarView:"Vista de calendario",logView:"Registro de impresión",manageTags:"Gestionar etiquetas",showFailedPrints:"Mostrar impresiones fallidas",hideFailedPrints:"Ocultar impresiones fallidas",hideDuplicates:"Ocultar duplicados",viewOriginalPrint:"Haga clic para ver la impresión original (n.º {{id}})",printTime:"Tiempo de impresión",filamentUsed:"Filamento usado",cost:"Coste",reprint:"Reimprimir",preview:"Vista previa",deleteArchive:"Eliminar archivo",deleteConfirm:"¿Está seguro de que desea eliminar este archivo?",favorite:"Favorito",unfavorite:"Quitar de favoritos",viewDetails:"Ver detalles",status:{completed:"Completada",failed:"Fallida",stopped:"Detenida"},toast:{source3mfAttached:"3MF de origen adjuntado: {{filename}}",failedUploadSource3mf:"Error al subir el 3MF de origen",source3mfRemoved:"3MF de origen eliminado",failedRemoveSource3mf:"Error al eliminar el 3MF de origen",f3dAttached:"F3D adjuntado: {{filename}}",failedUploadF3d:"Error al subir el F3D",f3dRemoved:"F3D eliminado",failedRemoveF3d:"Error al eliminar el F3D",timelapseAttached:"Time-lapse adjuntado: {{filename}}",timelapseAlreadyAttached:"El time-lapse ya está adjuntado",noMatchingTimelapse:"No se encontró ningún time-lapse coincidente",failedScanTimelapse:"Error al buscar el time-lapse",failedAttachTimelapse:"Error al adjuntar el time-lapse",timelapseRemoved:"Time-lapse eliminado",failedRemoveTimelapse:"Error al eliminar el time-lapse",timelapseUploaded:"Time-lapse subido: {{filename}}",failedUploadTimelapse:"Error al subir el time-lapse",archiveDeleted:"Archivo eliminado",failedDeleteArchive:"Error al eliminar el archivo",addedToFavorites:"Añadido a favoritos",removedFromFavorites:"Quitado de favoritos",projectUpdated:"Proyecto actualizado",failedUpdateProject:"Error al actualizar el proyecto",linkCopied:"Enlace copiado al portapapeles",failedCopyLink:"Error al copiar el enlace",photoDeleted:"Foto eliminada",failedDeletePhoto:"Error al eliminar la foto",failedDeleteArchives:"Error al eliminar los archivos",failedUpdateFavorites:"Error al actualizar los favoritos",exportDownloaded:"Exportación descargada",exportFailed:"Error en la exportación"},menu:{print:"Imprimir",schedule:"Programar",openInBambuStudio:"Abrir en el laminador",slice:"Laminar",externalLink:"Enlace externo",viewOnMakerWorld:"Ver en MakerWorld",preview3d:"Vista previa 3D",viewTimelapse:"Ver time-lapse",scanForTimelapse:"Buscar time-lapse",uploadTimelapse:"Subir time-lapse",removeTimelapse:"Eliminar time-lapse",downloadSource3mf:"Descargar 3MF de origen",uploadSource3mf:"Subir 3MF de origen",replaceSource3mf:"Reemplazar 3MF de origen",removeSource3mf:"Eliminar 3MF de origen",uploadF3d:"Subir F3D",replaceF3d:"Reemplazar F3D",downloadF3d:"Descargar F3D",removeF3d:"Eliminar F3D",download:"Descargar",copyDownloadLink:"Copiar enlace de descarga",qrCode:"Código QR",viewPhotos:"Ver fotos",viewPhotosCount:"Ver fotos ({{count}})",projectPage:"Página del proyecto",addToFavorites:"Añadir a favoritos",removeFromFavorites:"Quitar de favoritos",edit:"Editar",printLog:"Registro de impresión",goToProject:"Ir al proyecto: {{name}}",addToProject:"Añadir al proyecto",removeFromProject:"Quitar del proyecto",loading:"Cargando...",noProjectsAvailable:"No hay proyectos disponibles",searchProjects:"Buscar proyectos…",select:"Seleccionar",deselect:"Deseleccionar",delete:"Eliminar"},permission:{noReprint:"No tiene permiso para reimprimir este archivo",noAddToQueue:"No tiene permiso para añadir a la cola",noUpdateArchives:"No tiene permiso para actualizar archivos",noUploadFiles:"No tiene permiso para subir archivos",noDownload:"No tiene permiso para descargar archivos",noCopyLink:"No tiene permiso para copiar enlaces de descarga",noDelete:"No tiene permiso para eliminar este archivo",noCreate:"No tiene permiso para crear archivos"},platePicker:{title:"Seleccione la cama para la vista previa",hint:"Este archivo tiene varias camas. Elija una para abrirla en el visor de G-code.",plateLabel:"Cama {{index}}",objectCount:"{{count}} objeto",objectCount_plural:"{{count}} objetos",noGcode:"Este archivo no tiene G-code laminado para previsualizar. Ábralo en Bambu Studio para laminarlo primero."},card:{previousPlate:"Cama anterior",nextPlate:"Cama siguiente",plateNumber:"Cama {{index}}",moreOptions:"Haga clic con el botón derecho para más opciones",addToFavorites:"Añadir a favoritos",removeFromFavorites:"Quitar de favoritos",cancelled:"cancelada",failed:"fallida",duplicate:"duplicado",duplicateTitle:"Este modelo ya se ha impreso anteriormente",openSource3mf:"Abrir el 3MF de origen en Bambu Studio (clic derecho para más opciones)",downloadF3d:"Descargar el archivo de diseño de Fusion 360",viewTimelapse:"Ver time-lapse",viewPhoto:"Ver 1 foto",viewPhotos:"Ver {{count}} fotos",openFolder:"Abrir carpeta: {{name}}",slicedFile:"Archivo laminado - listo para imprimir",sourceFile:"Solo archivo de origen - no hay mapeo de AMS disponible",gcode:"GCODE",source:"ORIGEN",project:"Proyecto: {{name}}",runsBadge:"{{count}} impresiones",runsBadgeTitle:"{{count}} impresiones en total — {{successful}} con éxito, {{failed}} fallidas. Haga clic para ver el registro completo de impresión.",estimated:"Estimado: {{time}}",actual:"Real: {{time}}",accuracy:"Precisión: {{percent}}%",filament:"{{weight}} g",layer:"{{count}} capa",layers:"{{count}} capas",object:"{{count}} objeto",objects:"{{count}} objetos",slicedFor:"Laminado para {{model}}",uploadedBy:"Subido por",noPermissionReprint:"No tiene permiso para reimprimir",noFileForReprint:"No hay archivo 3MF disponible — no se pudo descargar el archivo de la impresora cuando se registró la impresión",noPermissionEdit:"No tiene permiso para editar archivos",noPermissionDelete:"No tiene permiso para eliminar archivos",reprint:"Reimprimir",schedulePrint:"Programar impresión",schedule:"Programar",openInBambuStudio:"Abrir en el laminador",openInBambuStudioToSlice:"Abrir en el laminador para laminar",slice:"Laminar",externalLink:"Enlace externo",makerWorld:"MakerWorld: {{designer}}",viewProject:"Ver proyecto",noExternalLink:"Sin enlace externo",preview3d:"Vista previa 3D",download:"Descargar",edit:"Editar",delete:"Eliminar"},runLog:{title:"Registro de impresión",modalTitle:"Registro de impresión — {{name}}",modalTitleFallback:"este archivo",empty:"Aún no se han registrado eventos de impresión para este archivo.",col:{date:"Fecha",status:"Estado",duration:"Duración",filament:"Filamento",cost:"Coste"},status:{completed:"Completada",failed:"Fallida",cancelled:"Cancelada",stopped:"Detenida",skipped:"Omitida",printing:"Imprimiendo"}},modal:{deleteArchive:"Eliminar archivo",deleteConfirm:'¿Está seguro de que desea eliminar "{{name}}"? Esta acción no se puede deshacer.',deleteButton:"Eliminar",deletePurgeStats:"Eliminar también esta impresión de las estadísticas rápidas (filamento, tiempo, coste, energía)",removeSource3mf:"Eliminar 3MF de origen",removeSource3mfConfirm:'¿Está seguro de que desea eliminar el archivo 3MF de origen de "{{name}}"? Esto eliminará el archivo de proyecto original del laminador.',removeButton:"Eliminar",removeF3d:"Eliminar F3D",removeF3dConfirm:'¿Está seguro de que desea eliminar el archivo de diseño de Fusion 360 de "{{name}}"?',removeTimelapse:"Eliminar time-lapse",removeTimelapseConfirm:'¿Está seguro de que desea eliminar el vídeo time-lapse de "{{name}}"?',timelapse:"{{name}} - Time-lapse",selectTimelapse:"Seleccionar time-lapse",selectTimelapseDesc:"No se encontró ninguna coincidencia automática. Seleccione el time-lapse para esta impresión:",deleteArchives:"Eliminar archivos",deleteArchivesConfirm:"¿Está seguro de que desea eliminar {{count}} archivo(s)? Esta acción no se puede deshacer.",deleteCount:"Eliminar {{count}}"},page:{title:"Archivos",printsCount:"{{filtered}} de {{total}} impresiones",dropFilesHere:"Suelte aquí los archivos .3mf",releaseToUpload:"Suelte para subir",only3mfSupported:"Solo se admiten archivos .3mf",close:"Cerrar",selected:"{{count}} seleccionados",selectAll:"Seleccionar todo",tags:"Etiquetas",project:"Proyecto",favorite:"Favorito",delete:"Eliminar",toggledFavorites:"Se cambió el estado de favorito de {{count}} archivo(s)",failedUpdateFavorites:"Error al actualizar los favoritos",archivesDeleted:"{{count}} archivo(s) eliminado(s)",failedDeleteArchives:"Error al eliminar los archivos",photoDeleted:"Foto eliminada",failedDeletePhoto:"Error al eliminar la foto"},list:{name:"Nombre",printer:"Impresora",date:"Fecha",size:"Tamaño",actions:"Acciones",hasTimelapse:"Tiene time-lapse"},log:{date:"Fecha",printName:"Nombre de la impresión",printer:"Impresora",user:"Usuario",status:"Estado",duration:"Duración",filament:"Filamento",allPrinters:"Todas las impresoras",allUsers:"Todos los usuarios",allStatuses:"Todos los estados",cancelled:"Cancelada",skipped:"Omitida",dateFrom:"Desde",dateTo:"Hasta",noEntries:"No se encontraron entradas en el registro de impresión",showing:"Mostrando {{count}} de {{total}} entradas",rowsPerPage:"Filas",page:"Página",prev:"Anterior",next:"Siguiente",clearLog:"Borrar registro",clearLogTitle:"Borrar el registro de impresión",clearLogConfirm:"Todas las entradas del registro de impresión se eliminarán permanentemente. Los archivos y los elementos de la cola no se ven afectados. Esta acción no se puede deshacer. ¿Está seguro?",clearLogButton:"Borrar todo",cleared:"{{count}} entradas del registro borradas",clearFailed:"Error al borrar el registro de impresión"}},queue:{filamentShort:{rowBadge:"Filamento insuficiente para la bobina asignada",rowTooltip:"El planificador marco este elemento. Pulsa Reproducir para ver el deficit por slot y decidir si imprimir de todos modos.",confirmTitle:"Filamento insuficiente",confirmIntro:"La bobina asignada no puede cubrir al menos un slot. Imprimir de todos modos?",lineItem:"Slot {{slot}}: necesita {{required}} g, quedan {{remaining}} g",unknown:"desconocido",printAnyway:"Imprimir de todos modos"},title:"Cola de impresión",subtitle:"Programe y gestione sus trabajos de impresión",addToQueue:"Añadir a la cola",print:"Imprimir",reprint:"Reimprimir",schedulePrint:"Programar impresión",editQueueItem:"Editar elemento de la cola",printToPrinters:"Imprimir en {{count}} impresoras",queueToPrinters:"Encolar en {{count}} impresoras",queueSelectedPlates:"Encolar {{count}} camas",selectAllPlates:"Seleccionar las {{count}} camas",deselectAll:"Deseleccionar todo",printQueued:"Impresión encolada",itemsQueued:"{{count}} elementos encolados",sending:"Enviando...",sendingProgress:"Enviando {{current}}/{{total}}...",adding:"Añadiendo...",addingProgress:"Añadiendo {{current}}/{{total}}...",savingProgress:"Guardando {{current}}/{{total}}...",clearQueue:"Vaciar la cola",clearHistory:"Borrar el historial",emptyQueue:"La cola está vacía",position:"Posición",scheduledTime:"Hora programada",moveUp:"Subir",moveDown:"Bajar",startNow:"Iniciar ahora",printingInProgress:"Impresión en curso...",viewArchive:"Ver archivo",viewInFileManager:"Ver en el gestor de archivos",itemCount:"{{count}} elemento",itemCount_plural:"{{count}} elementos",dragToReorder:"Arrastre para reordenar (solo elementos «lo antes posible»)",reorderHint:"La posición solo afecta a los elementos «lo antes posible». Los elementos programados se ejecutan a su hora establecida.",sjf:{label:"SJF",tooltip:"Trabajo más corto primero — el planificador prioriza las impresiones más cortas"},addedBy:"Añadido por {{name}}",nextInQueue:"Siguiente en la cola",clearPlateSuccess:"Cama despejada — lista para la próxima impresión",plateNumber:"Cama {{index}}",quantity:"Cantidad",quantityHint:"Crea {{count}} elementos en la cola",activeBatches:"Lotes activos",batchProgress:"{{completed}} de {{total}} completados",cancelBatch:"Cancelar los restantes",batchCancelled:"Elementos restantes del lote cancelados",cancelBatchConfirmTitle:"Cancelar lote",cancelBatchConfirmMessage:"¿Cancelar todos los elementos pendientes restantes de este lote?",batch:"Lote",sections:{currentlyPrinting:"Imprimiendo actualmente",queued:"En cola",history:"Historial"},status:{pending:"Pendiente",waiting:"En espera",printing:"Imprimiendo",paused:"En pausa",completed:"Completada",failed:"Fallida",skipped:"Omitida",cancelled:"Cancelada"},summary:{printing:"Imprimiendo",queued:"En cola",totalTime:"Tiempo total de la cola",totalWeight:"Peso total de la cola",history:"Historial"},filter:{allPrinters:"Todas las impresoras",unassigned:"Sin asignar",allStatus:"Todos los estados",allLocations:"Todas las ubicaciones",any:"Cualquiera"},sort:{byPosition:"Ordenar por posición",byName:"Ordenar por nombre",byPrinter:"Ordenar por impresora",bySchedule:"Ordenar por programación",byDate:"Ordenar por fecha",ascendingOldest:"Ascendente (más antiguos primero)",descendingNewest:"Descendente (más recientes primero)"},badges:{staged:"Preparado",requiresPrevious:"Requiere éxito previo",autoPowerOff:"Apagado automático",gcodeInjection:"G-code"},empty:{title:"No hay impresiones programadas",description:"Programe una impresión desde la página de Archivos con la opción «Programar» del menú contextual, o arrastre y suelte archivos para empezar."},time:{asap:"Lo antes posible",overdue:"Atrasada",now:"Ahora",lessThanMinute:"En menos de un minuto",inMinutes:"En {{count}} min",inHours:"En {{count}} horas"},actions:{stopPrint:"Detener impresión",startPrint:"Iniciar impresión",requeue:"Volver a encolar"},bulkEdit:{title:"Editar {{count}} elemento",title_plural:"Editar {{count}} elementos",description:"Solo se aplicarán los ajustes modificados a los elementos seleccionados.",printer:"Impresora",noChange:"— Sin cambios —",queueOptions:"Opciones de la cola",staged:"Preparado (inicio manual)",autoPowerOff:"Apagado automático tras la impresión",requirePrevious:"Requerir éxito previo",printOptions:"Opciones de impresión",bedLevelling:"Nivelación de la cama",flowCalibration:"Calibración del flujo",vibrationCalibration:"Calibración de vibración",layerInspection:"Inspección de la primera capa",timelapse:"Time-lapse",useAms:"Usar AMS",applyChanges:"Aplicar cambios",selectAll:"Seleccionar todo",deselectAll:"Deseleccionar todo",selected:"{{count}} seleccionados",editSelected:"Editar seleccionados",cancelSelected:"Cancelar seleccionados"},confirm:{cancelTitle:"Cancelar impresión programada",cancelMessage:'¿Está seguro de que desea cancelar "{{name}}"?',stopTitle:"Detener impresión",stopMessage:'¿Está seguro de que desea detener la impresión actual "{{name}}"? Esto cancelará el trabajo de impresión en la impresora.',removeTitle:"Quitar del historial",removeMessage:'¿Está seguro de que desea quitar "{{name}}" del historial de la cola?',clearHistoryTitle:"Borrar el historial",clearHistoryMessage:"¿Está seguro de que desea quitar los {{count}} elemento(s) del historial?",cancelButton:"Cancelar impresión",stopButton:"Detener impresión",thisPrint:"esta impresión",thisItem:"este elemento"},toast:{cancelled:"Elemento de la cola cancelado",cancelFailed:"Error al cancelar el elemento",removed:"Elemento de la cola eliminado",removeFailed:"Error al eliminar el elemento",stopped:"Impresión detenida",stopFailed:"Error al detener la impresión",released:"Impresión liberada a la cola",startFailed:"Error al iniciar la impresión",reorderFailed:"Error al reordenar la cola",historyCleared:"Se borraron {{count}} elemento(s) del historial",clearHistoryFailed:"Error al borrar el historial",updateFailed:"Error al actualizar los elementos",bulkCancelled:"Se cancelaron {{count}} elemento(s)",bulkCancelFailed:"Error al cancelar los elementos"},timeline:{listView:"Lista",timelineView:"Cronología",unassigned:"Sin asignar",noData:"No hay impresiones programadas para este día",allDoneBy:"Todas las impresiones estimadas para las {{time}}",staged:"Preparado",filterAll:"Mostrar todo",filterPrinting:"Imprimiendo",filterQueued:"En cola",time:{anyMoment:"en cualquier momento",minutesLeft:"{{minutes}} min restantes",hoursLeft:"{{hours}} h restantes",hoursMinutesLeft:"{{hours}} h {{minutes}} min restantes"},day:{previous:"Día anterior",next:"Día siguiente",today:"Hoy"}},permissions:{noStopPrint:"No tiene permiso para detener impresiones",noStartPrint:"No tiene permiso para iniciar impresiones",noEdit:"No tiene permiso para editar este elemento de la cola",noCancel:"No tiene permiso para cancelar este elemento de la cola",noRequeue:"No tiene permiso para volver a encolar elementos",noRemove:"No tiene permiso para eliminar este elemento de la cola",noClearHistory:"No tiene permiso para borrar todo el historial",noEditItems:"No tiene permiso para editar elementos de la cola",noCancelItems:"No tiene permiso para cancelar elementos de la cola"}},backgroundDispatch:{unknownFile:"Archivo desconocido",unknownPrinter:"Impresora desconocida",startingPrints:"Iniciando impresiones",progressSummary:"{{complete}}/{{total}} completadas • Enviadas: {{dispatched}} • Procesando: {{processing}}",expandDetails:"Expandir los detalles del envío",collapseDetails:"Contraer los detalles del envío",dismissToast:"Descartar la notificación de envío",cancelDispatchJob:"Cancelar el trabajo de envío",cancel:"Cancelar",cancelling:"Cancelando…",awaitingPrinter:"Esperando a la impresora…",status:{dispatched:"Enviada",processing:"Procesando",completed:"Completada",failed:"Fallida",cancelled:"Cancelada"},toast:{cancellingUpload:"Cancelando la subida...",cancelled:"Envío cancelado",cancelFailed:"Error al cancelar el envío",completeWithFailures:"Envío en segundo plano completado: {{completed}} con éxito, {{failed}} con error",completeSuccess:"Envío en segundo plano completado: {{completed}} con éxito",printStartedRemaining:"{{completed}} impresión(es) iniciada(s), enviando {{remaining}} más..."}},stats:{title:"Estadísticas",subtitle:"Arrastre los widgets para reorganizarlos. Haga clic en el icono del ojo para ocultarlos.",overview:"Resumen",totalPrints:"Impresiones totales",successRate:"Tasa de éxito",totalPrintTime:"Tiempo total de impresión",printTime:"Tiempo de impresión",totalFilament:"Filamento total usado",filamentUsed:"Filamento usado",filamentCost:"Coste del filamento",totalCost:"Coste total",energyUsed:"Energía usada",energyCost:"Coste de la energía",energyWarmingUpTooltip:"El seguimiento de energía aún está recopilando instantáneas horarias. Los totales por rango de fechas serán precisos una vez que exista al menos una instantánea antes del rango seleccionado. Los valores iniciales pueden quedarse cortos.",averagePrintTime:"Tiempo medio de impresión",printsPerDay:"Impresiones por día",byPrinter:"Por impresora",printsByPrinter:"Impresiones por impresora",byMaterial:"Por material",byMonth:"Por mes",last7Days:"Últimos 7 días",last30Days:"Últimos 30 días",last90Days:"Últimos 90 días",allTime:"Todo el tiempo",quickStats:"Estadísticas rápidas",printActivity:"Actividad de impresión",filamentTypes:"Tipos de filamento",filamentTrends:"Tendencias del filamento",failureAnalysis:"Análisis de fallos",timeAccuracy:"Precisión temporal",successful:"Con éxito:",failed:"Fallidas:",cancelled:"Canceladas:",perfectEstimate:"100% = estimación perfecta",noTimeAccuracyData:"Aún no hay datos de precisión temporal",noFilamentData:"No hay datos de filamento disponibles",noPrinterData:"No hay datos de impresora disponibles",noPrintData:"No hay datos de impresión disponibles",noPrintDataLast30Days:"No hay datos de impresión en los últimos 30 días",failureReasons:"Motivos de fallo",topFailureReasons:"Principales motivos de fallo",failedPrintsCount:"{{failed}} / {{total}} impresiones fallidas",lastWeekRate:"Semana pasada: {{rate}}%",resetLayout:"Restablecer disposición",recalculateCosts:"Recalcular costes",recalculateCostsHint:"Recalcular todos los costes de archivo usando los precios actuales del filamento",exportStats:"Exportar estadísticas",exportAsCsv:"Exportar como CSV",exportAsExcel:"Exportar como Excel",hiddenCount:"{{count}} ocultos",exportDownloaded:"Exportación descargada",exportFailed:"Error en la exportación",layoutReset:"Disposición restablecida",recalculatedCosts:"Costes recalculados para {{count}} archivos",recalculateFailed:"Error al recalcular los costes",loadingStats:"Cargando estadísticas...",noPermissionResetLayout:"No tiene permiso para restablecer la disposición",noPermissionRecalculate:"No tiene permiso para recalcular los costes",noPrintDataInRange:"No hay datos de impresión en el rango seleccionado",periodFilament:"Filamento del periodo",periodCost:"Coste del periodo",avgPerPrint:"Promedio por impresión",usageOverTime:"Uso a lo largo del tiempo",filamentByWeight:"Peso",printDuration:"Duración de la impresión",printerUtilization:"Uso de la impresora",filamentSuccess:"Éxito por material",printHabits:"Hábitos de impresión",printTimeOfDay:"Hora del día de impresión",colorDistribution:"Distribución de colores",noColorData:"No hay datos de color disponibles",records:"Récords",longestPrint:"Impresión más larga",heaviestPrint:"Impresión más pesada",mostExpensivePrint:"Más cara",busiestDay:"Día más activo",successStreak:"Racha de éxitos",streakPrint:"impresión consecutiva",streakPrints:"{{count}} impresiones consecutivas",printerStats:"Estadísticas de la impresora",hours:"horas",avgPrints:"Impresiones medias",noArchiveData:"No hay datos de impresión disponibles",filamentByTime:"Tiempo",avgWeight:"Peso medio",avgTime:"Tiempo medio",filamentByPrints:"Impresiones",timeframe:{today:"Hoy","this-week":"Esta semana","this-month":"Este mes","last-7":"Últimos 7 días","last-30":"Últimos 30 días","last-90":"Últimos 90 días","this-year":"Este año","all-time":"Todo el tiempo",custom:"Rango personalizado",from:"Desde",to:"Hasta"},allUsers:"Todos los usuarios",noUser:"Sin usuario (sistema)",filterByUser:"Filtrar por usuario"},maintenance:{title:"Mantenimiento",overview:"Resumen",allOk:"Todo el mantenimiento al día",dueCount:"{{count}} tarea pendiente",dueCount_plural:"{{count}} tareas pendientes",warningCount:"{{count}} advertencia",warningCount_plural:"{{count}} advertencias",totalPrintTime:"Tiempo total de impresión",nextMaintenance:"Próximo mantenimiento",nothingDue:"Nada pendiente",tasks:"Tareas",lastPerformed:"Realizado por última vez",interval:"Intervalo",hoursRemaining:"{{hours}} h restantes",hoursOverdue:"{{hours}} h de retraso",markDone:"Marcar como hecho",performMaintenance:"Realizar mantenimiento",history:"Historial",noHistory:"No hay historial de mantenimiento",editPrintHours:"Editar horas de impresión",currentHours:"Horas actuales",statusTab:"Estado",settingsTab:"Ajustes",overdueCount:"{{count}} atrasadas",dueSoonCount:"{{count}} pronto pendientes",dueSoon:"Pronto pendiente",allGood:"Todo correcto",overdueBy:"Atrasado {{duration}}",dueIn:"Pendiente en {{duration}}",timeLeft:"{{duration}} restante",day:"1 día",days:"{{count}} días",week:"1 semana",weeks:"{{count}} semanas",month:"1 mes",months:"{{count}} meses",year:"1 año",maintenanceTypes:"Tipos de mantenimiento",maintenanceTypesDescription:"Tipos del sistema y sus tareas de mantenimiento personalizadas",addCustomType:"Añadir tipo personalizado",restoreDefaults:"Restaurar tareas predeterminadas",intervalType:"Tipo de intervalo",intervalValue:"Intervalo ({{type}})",icon:"Icono",documentationLink:"Enlace de documentación (opcional)",assignToPrinters:"Asignar a impresoras",selectAtLeastOnePrinter:"Seleccione al menos una impresora",addType:"Añadir tipo",custom:"Personalizado",printHours:"Horas de impresión",calendarDays:"Días naturales",exampleName:"p. ej., Reemplazar filtro HEPA",viewDocumentation:"Ver documentación",timeBasedInterval:"Intervalo basado en el tiempo",intervalOverrides:"Anulaciones de intervalo",intervalOverridesDescription:"Personalizar intervalos para impresoras concretas",assignedToPrinters:"Asignado a las impresoras:",noPrintersAssigned:"No hay impresoras asignadas",addPrinterShort:"Añadir:",printersAssignedClick:"{{count}} impresora(s) asignada(s) - haga clic para gestionar",removeFromPrinter:"Quitar de esta impresora",types:{lubricateCarbonRods:"Lubricar varillas de carbono",lubricateRails:"Lubricar guías lineales",cleanNozzle:"Limpiar boquilla/fusor",checkBelts:"Comprobar la tensión de las correas",cleanBuildPlate:"Limpiar la cama de impresión",checkExtruder:"Comprobar los engranajes del extrusor",checkCooling:"Comprobar los ventiladores de refrigeración",generalInspection:"Inspección general",cleanCarbonRods:"Limpiar varillas de carbono",lubricateSteelRods:"Lubricar varillas de acero",cleanSteelRods:"Limpiar varillas de acero",cleanLinearRails:"Limpiar guías lineales",checkPtfeTube:"Comprobar el tubo de PTFE",replaceHepaFilter:"Reemplazar filtro HEPA",replaceCarbonFilter:"Reemplazar filtro de carbono",lubricateLeftNozzleRail:"Lubricar la guía de la boquilla izquierda"},maintenanceComplete:"Mantenimiento marcado como completado",typeUpdated:"Tipo de mantenimiento actualizado",typeDeleted:"Tipo de mantenimiento eliminado",defaultsRestored:"Se restauraron {{count}} tarea(s) predeterminada(s)",printHoursUpdated:"Horas de impresión actualizadas",printerAssigned:"Impresora asignada",printerRemoved:"Impresora eliminada",deleteTypeConfirm:'¿Eliminar "{{name}}"?',deleteSystemTypeTitle:"¿Eliminar la tarea de mantenimiento predeterminada?",deleteSystemTypeMessage:'¿Está seguro de que desea eliminar la tarea de mantenimiento predeterminada "{{name}}"?',noPermissionUpdate:"No tiene permiso para actualizar elementos de mantenimiento",noPermissionPerform:"No tiene permiso para realizar mantenimiento",noPermissionEditTypes:"No tiene permiso para editar tipos de mantenimiento",noPermissionDeleteTypes:"No tiene permiso para eliminar tipos de mantenimiento",noPermissionEditHours:"No tiene permiso para editar las horas de impresión",noPermissionRemovePrinter:"No tiene permiso para quitar asignaciones de impresoras",noPermissionAssignPrinter:"No tiene permiso para asignar impresoras",noPermissionEditIntervals:"No tiene permiso para editar intervalos",configureSettings:"Configurar tipos e intervalos de mantenimiento"},settings:{title:"Ajustes",general:"General",tabs:{general:"General",smartPlugs:"Enchufes inteligentes",notifications:"Notificaciones",queue:"Flujo de trabajo",filament:"Filamento",network:"Red",apiKeys:"Claves API",virtualPrinter:"Impresora virtual",spoolbuddy:"SpoolBuddy",failureDetection:"Detección de fallos",users:"Autenticación",backup:"Copia de seguridad",emailAuth:"Autenticación por correo",ldap:"LDAP",twoFa:"Autenticación de dos factores",oidc:"SSO / OIDC",security:"Seguridad"},spoolbuddy:{infoTitle:"Dispositivos SpoolBuddy",infoBody:"Los quioscos SpoolBuddy se registran automáticamente mediante una señal de latido. Anule el registro de un dispositivo aquí si ya no está en uso o si quedó un duplicado obsoleto tras el fallo de un demonio.",duplicatesTitle:"{{count}} dispositivos registrados",duplicatesBody:"La interfaz del quiosco solo usa el primer dispositivo registrado. Si uno de estos es un duplicado obsoleto de un fallo, anule su registro — un dispositivo en línea se volverá a registrar en su próxima señal de latido.",empty:"Aún no hay dispositivos SpoolBuddy registrados.",online:"En línea",offline:"Desconectado",unregister:"Anular registro",unregisterSuccess:"Registro del dispositivo anulado",unregisterError:"Error al anular el registro del dispositivo",confirmTitle:"¿Anular el registro del dispositivo SpoolBuddy?",confirmBody:'Esto eliminará "{{hostname}}" ({{deviceId}}) de la base de datos. Si el dispositivo está en línea, se volverá a registrar en su próxima señal de latido.',ipAddress:"Dirección IP",firmware:"Firmware",lastSeen:"Visto por última vez",daemonUptime:"Tiempo de actividad del demonio",systemUptime:"Tiempo de actividad del sistema",never:"nunca",nfc:"NFC",scale:"Báscula",cpuTemp:"Temp. de CPU",cpuLoad:"Carga de CPU",memory:"Memoria",disk:"Disco",update:"Actualizar",updateConfirmTitle:"¿Actualizar el demonio de Spoolbuddy?",updateConfirmBody:'¿Iniciar una actualización de software en "{{hostname}}"? El demonio se reiniciará una vez aplicada la actualización.',restartBrowser:"Reiniciar navegador",restartBrowserConfirmTitle:"¿Reiniciar el navegador del quiosco?",restartBrowserConfirmBody:'¿Reiniciar el navegador del quiosco en "{{hostname}}"? La pantalla se quedará en negro brevemente.',restartDaemon:"Reiniciar demonio",restartDaemonConfirmTitle:"¿Reiniciar el demonio de Spoolbuddy?",restartDaemonConfirmBody:'¿Reiniciar el demonio de Spoolbuddy en "{{hostname}}"? El dispositivo se desconectará durante unos segundos.',reboot:"Reiniciar",rebootConfirmTitle:"¿Reiniciar el dispositivo?",rebootConfirmBody:'¿Reiniciar "{{hostname}}"? El dispositivo estará desconectado durante alrededor de un minuto.',shutdown:"Apagar",shutdownConfirmTitle:"¿Apagar el dispositivo?",shutdownConfirmBody:'¿Apagar "{{hostname}}"? Necesitará acceso físico para volver a encenderlo.',commandConfirm:"Confirmar",commandQueued:"Comando encolado",commandError:"Error al enviar el comando"},ldap:{title:"Autenticación LDAP",enabledDesc:"La autenticación LDAP está activada",disabledDesc:"La autenticación LDAP está desactivada",disabledHint:"Configure y guarde los ajustes de LDAP a continuación y luego actívela.",enabled:"Autenticación LDAP activada",disabled:"Autenticación LDAP desactivada",feature1:"Los usuarios pueden iniciar sesión con credenciales LDAP",feature2:"La cuenta de administrador local permanece como alternativa",feature3:"Los grupos LDAP se asignan a los grupos de Bambuddy al iniciar sesión",serverConfig:"Configuración del servidor LDAP",serverUrl:"URL del servidor",serverUrlHint:"Use ldaps:// para SSL o ldap:// con StartTLS",security:"Seguridad",securityHint:"StartTLS actualiza una conexión sin cifrar a TLS. LDAPS usa TLS desde el principio.",bindDn:"Bind DN (cuenta de servicio)",bindPassword:"Contraseña de Bind",searchBase:"DN base de búsqueda",userFilter:"Filtro de búsqueda de usuarios",userFilterHint:"{username} se sustituye por el nombre de usuario de inicio de sesión. Use (uid={username}) para OpenLDAP.",advanced:"Avanzado",autoProvision:"Aprovisionar usuarios automáticamente",autoProvisionHint:"Crear automáticamente una cuenta de Bambuddy en el primer inicio de sesión LDAP",defaultGroup:"Grupo predeterminado",defaultGroupNone:"— Ninguno (sin alternativa) —",defaultGroupHint:"Grupo alternativo asignado cuando un usuario LDAP se autentica pero no figura en ningún grupo LDAP asignado. Déjelo vacío para dejar a los usuarios sin asignar sin permisos.",groupMapping:"Asignación de grupos (JSON)",groupMappingHint:"Asignar los DN de grupos LDAP a los grupos de Bambuddy. Grupos disponibles: ",testConnection:"Probar conexión",settingsSaved:"Ajustes de LDAP guardados",errors:{serverRequired:"La URL del servidor LDAP es obligatoria",searchBaseRequired:"El DN base de búsqueda es obligatorio",enableAuthFirst:"Active primero la autenticación",configureLdapFirst:"Guarde primero los ajustes de LDAP"}},email:{smtpSettings:"Configuración SMTP",smtpHost:"Servidor SMTP",smtpPort:"Puerto SMTP",security:"Seguridad",authentication:"Autenticación",username:"Nombre de usuario",password:"Contraseña",fromEmail:"Correo del remitente",fromName:"Nombre del remitente",testConnection:"Probar conexión SMTP",testRecipient:"Correo del destinatario de prueba",sendTest:"Enviar correo de prueba",sending:"Enviando...",save:"Guardar ajustes",saving:"Guardando...",advancedAuth:"Autenticación avanzada",advancedAuthEnabled:"La autenticación avanzada está activada",advancedAuthEnabledDesc:"Las funciones de gestión de usuarios basadas en correo están activas. Los nuevos usuarios recibirán contraseñas autogeneradas por correo, y los usuarios podrán restablecer sus contraseñas mediante la función de contraseña olvidada.",advancedAuthDisabled:"La autenticación avanzada está desactivada",advancedAuthDisabledDesc:"Active la autenticación avanzada para habilitar las funciones basadas en correo para la gestión de usuarios.",enable:"Activar",disable:"Desactivar",feature1:"Las contraseñas se autogeneran y se envían por correo a los nuevos usuarios",feature2:"Los usuarios pueden iniciar sesión con el nombre de usuario o el correo",feature3:"La función de contraseña olvidada está disponible",feature4:"Los administradores pueden restablecer las contraseñas de los usuarios por correo",errors:{requiredFields:"Rellene todos los campos obligatorios",usernameRequired:"El nombre de usuario es obligatorio cuando la autenticación está activada",enterTestEmail:"Introduzca una dirección de correo de prueba",smtpServerAndEmail:"Rellene el servidor SMTP y el correo del remitente antes de probar",usernamePasswordRequired:"El nombre de usuario y la contraseña son obligatorios cuando la autenticación está activada",configureSmtpFirst:"Configure y pruebe primero los ajustes de SMTP",enableAuthFirst:"Active primero la autenticación para usar las funciones basadas en correo."},success:{settingsSaved:"Ajustes de SMTP guardados correctamente"},securityOptions:{starttls:"STARTTLS (puerto 587)",ssl:"SSL/TLS (puerto 465)",none:"Ninguna (puerto 25)"},authOptions:{enabled:"Activada",disabled:"Desactivada"}},appearance:"Apariencia",notifications:"Notificaciones",smartPlugs:"Enchufes inteligentes",spoolman:"Spoolman",updates:"Actualizaciones",language:"Idioma",languageDescription:"Seleccione su idioma preferido",theme:"Tema",themeLight:"Claro",themeDark:"Oscuro",themeSystem:"Sistema",defaultView:"Vista predeterminada",defaultViewDescription:"Página que se muestra al abrir la aplicación",checkForUpdates:"Buscar actualizaciones",autoUpdate:"Actualización automática",currentVersion:"Versión actual",latestVersion:"Versión más reciente",upToDate:"Está actualizado",updateAvailable:"Actualización disponible",notificationLanguage:"Idioma de las notificaciones",notificationLanguageDescription:"Idioma de las notificaciones push",bedCooledThreshold:"Umbral de cama enfriada",bedCooledThresholdDescription:"Temperatura por debajo de la cual se considera que la cama se ha enfriado tras una impresión",userNotificationsEnabled:"Notificaciones de usuario",userNotificationsEnabledDescription:"Activa el menú de notificaciones de usuario y las notificaciones por correo de los eventos de los trabajos de impresión. Requiere autenticación avanzada.",userNotificationsDisabledHint:"Active la autenticación avanzada para usar las notificaciones de usuario.",notificationProviders:"Proveedores de notificaciones",addProvider:"Añadir proveedor",editProvider:"Editar proveedor",providerType:"Tipo de proveedor",testNotification:"Notificación de prueba",testSuccess:"Notificación de prueba enviada correctamente",testFailed:"Error al enviar la notificación de prueba",quietHours:"Horas de silencio",quietHoursDescription:"No molestar durante estas horas",quietHoursStart:"Inicio",quietHoursEnd:"Fin",events:{title:"Eventos de notificación",printStart:"Impresión iniciada",printComplete:"Impresión completada",printFailed:"Impresión fallida",printStopped:"Impresión detenida",printProgress:"Hitos de progreso",printProgressDescription:"Notificar al 25%, 50% y 75%",printerOffline:"Impresora desconectada",printerError:"Error de la impresora",filamentLow:"Filamento bajo",maintenanceDue:"Mantenimiento pendiente",maintenanceDueDescription:"Notificar cuando se necesite mantenimiento"},smartPlug:{title:"Enchufes inteligentes",add:"Añadir enchufe inteligente",edit:"Editar enchufe inteligente",name:"Nombre",ipAddress:"Dirección IP",linkedPrinter:"Impresora vinculada",autoOn:"Encendido automático",autoOnDescription:"Encender cuando comienza la impresión",autoOff:"Apagado automático",autoOffDescription:"Apagar tras completar la impresión",offDelay:"Retardo de apagado",offDelayMinutes:"Minutos tras la impresión",offDelayTemp:"Cuando la boquilla está por debajo de la temperatura",currentState:"Estado actual",turnOn:"Encender",turnOff:"Apagar"},filamentTracking:"Seguimiento del filamento",filamentTrackingDesc:"Elija cómo realizar el seguimiento de sus bobinas de filamento. Puede usar el inventario integrado o conectar un servidor Spoolman externo.",filamentChecks:"Comprobaciones de filamento",disableFilamentWarnings:"Desactivar las advertencias de filamento",disableFilamentWarningsDesc:"No mostrar advertencias sobre filamento insuficiente al imprimir o encolar",preferLowestFilament:"Preferir el filamento con menos restante",preferLowestFilamentDesc:"Cuando varias bobinas coincidan, usar la que tenga menos filamento restante",trackingModeBuiltIn:"Inventario integrado",trackingModeBuiltInDesc:"Incluye coincidencia automática por RFID y seguimiento del uso",trackingModeSpoolmanDesc:"Servidor externo de gestión de filamento",builtInFeatureRfid:"Detecta automáticamente las bobinas RFID de Bambu Lab en el AMS",builtInFeatureUsage:"Realiza el seguimiento del consumo de filamento por impresión",builtInFeatureCatalog:"Gestione bobinas, colores y perfiles de factor K",builtInFeatureThirdParty:"Las bobinas de terceros se pueden asignar a bobinas del inventario",amsSyncButton:"Sincronizar pesos desde el AMS",amsSyncTitle:"Sincronizar los pesos de las bobinas desde el AMS",amsSyncMessage:"Esto sobrescribirá todos los pesos de las bobinas del inventario con los valores actuales de % restante del AMS de las impresoras conectadas. Use esto para recuperarse de datos de peso dañados. Las impresoras deben estar en línea.",amsSyncing:"Sincronizando...",amsSyncSuccess:"{{synced}} bobina(s) sincronizada(s), {{skipped}} omitida(s)",amsSyncError:"Error al sincronizar los pesos desde el AMS",spoolmanAmsSyncButton:"Sincronizar pesos de Spoolman desde el AMS",spoolmanAmsSyncTitle:"Sincronizar los pesos de las bobinas de Spoolman desde el AMS",spoolmanAmsSyncMessage:"Esto actualizará todos los pesos de las bobinas de Spoolman según los valores actuales de % restante del AMS de las impresoras conectadas. Las impresoras deben estar en línea.",spoolmanAmsSyncing:"Sincronizando...",spoolmanAmsSyncSuccess:"{{synced}} bobina(s) sincronizada(s), {{skipped}} omitida(s)",spoolmanAmsSyncError:"Error al sincronizar los pesos de Spoolman desde el AMS",spoolmanAmsSyncErrorUnreachable:"Error al sincronizar los pesos de Spoolman (Spoolman inaccesible)",spoolmanAmsSyncErrorNotConfigured:"Error al sincronizar los pesos de Spoolman (Spoolman no configurado)",spoolmanNotConfigured:"Spoolman no configurado",spoolmanFilamentCatalogTitle:"Catálogo de filamentos de Spoolman",spoolmanFilamentCatalogDesc:"Nombres de filamentos y pesos de tara de su instancia de Spoolman. El nombre y el peso de la bobina se pueden editar aquí; el resto de las propiedades se gestionan directamente en Spoolman.",spoolmanUrl:"URL de Spoolman",spoolmanUrlHint:"URL de su servidor Spoolman (p. ej., http://localhost:7912)",spoolmanConnected:"Conectado",spoolmanDisconnected:"Desconectado",status:"Estado",connect:"Conectar",disconnect:"Desconectar",howSyncWorks:"Cómo funciona la sincronización",syncInfoRfidOnly:"Solo se sincronizan las bobinas oficiales de Bambu Lab con RFID",syncInfoAutoCreate:"Las bobinas nuevas se crean automáticamente en Spoolman en la primera sincronización",syncInfoThirdPartySkipped:"Las bobinas que no son de Bambu Lab (de terceros, rellenadas) se omiten",linkingExistingSpools:"Vincular bobinas existentes",linkingExistingSpoolsDesc:'Para vincular bobinas existentes de Spoolman a su AMS, pase el cursor sobre una ranura del AMS y haga clic en "Vincular a Spoolman".',syncMode:"Modo de sincronización",syncModeAuto:"Automática",syncModeManual:"Solo manual",syncModeAutoDesc:"Los datos del AMS se sincronizan automáticamente cuando se detectan cambios",syncModeManualDesc:"Sincronizar solo cuando se active manualmente",syncAmsData:"Sincronizar datos del AMS",syncAmsDataDesc:"Sincronizar manualmente los datos del AMS de la impresora con Spoolman",allPrinters:"Todas las impresoras",noDefaultPrinter:"Sin predeterminada (preguntar cada vez)",sidebarOrder:"Orden de la barra lateral",saveThumbnails:"Guardar miniaturas",captureFinishPhoto:"Capturar foto de finalización",noPrintersConfigured:"No hay impresoras configuradas",archiveMode:{always:"Crear siempre una entrada de archivo",never:"No crear nunca una entrada de archivo",ask:"Preguntar cada vez"},checkForUpdatesLabel:"Buscar actualizaciones",checkPrinterFirmware:"Comprobar el firmware de la impresora",includeBetaUpdates:"Incluir versiones beta",includeBetaUpdatesDesc:"Notificar sobre versiones beta y preliminares al buscar actualizaciones",enableRetry:"Activar reintentos",homeAssistantDescription:"Controlar enchufes inteligentes mediante Home Assistant",environmentManagedLabel:"(Gestionado por el entorno)",autoEnabledViaEnv:"Activado automáticamente mediante variables de entorno",urlFromEnvReadOnly:"Valor establecido por la variable de entorno HA_URL (solo lectura)",tokenFromEnvReadOnly:"Valor establecido por la variable de entorno HA_TOKEN (solo lectura)",mqttConnectedTo:"Conectado a",prometheusDescription:"Exponer los datos de la impresora en formato Prometheus",noSmartPlugsTitle:"No hay enchufes inteligentes configurados",noSmartPlugsDescription:"Añada un enchufe inteligente basado en Tasmota para realizar el seguimiento del consumo de energía y automatizar el control de la alimentación.",noProvidersTitle:"No hay proveedores configurados",noProvidersDescription:"Añada un proveedor para recibir alertas.",noTemplatesAvailable:"No hay plantillas disponibles. Reinicie el backend para cargar las plantillas predeterminadas.",apiPermissionView:"Ver el estado de la impresora y la cola",apiPermissionEdit:"Añadir y quitar elementos de la cola de impresión",apiKeysEmptyTitle:"No hay claves API",apiKeysEmptyDescription:"Cree una clave API para integrarse con servicios externos.",noUsersFound:"No se encontraron usuarios",noGroupsFound:"No se encontraron grupos",noGroupsAvailable:"No hay grupos disponibles",passwordsDoNotMatch:"Las contraseñas no coinciden",systemGroupWarning:"Los nombres de los grupos del sistema no se pueden cambiar",authDisabledTitle:"La autenticación está desactivada",authDisabledFeature1:"Exigir inicio de sesión para acceder al sistema",authDisabledFeature2:"Crear varios usuarios con permisos basados en grupos",authDisabledFeature3:"Controlar el acceso con más de 50 permisos granulares",userHasCreated:"Este usuario ha creado:",userItemsQuestion:"¿Qué desea hacer con estos elementos?",deleteUserConfirm:"¿Está seguro de que desea eliminar este usuario?",actionCannotBeUndone:"Esta acción no se puede deshacer.",addFirstSmartPlug:"Añada su primer enchufe inteligente",providers:"Proveedores",log:"Registro",testAll:"Probar todo",testResults:"Resultados de la prueba",testPassedCount:"{{count}} superadas",testFailedCount:"{{count}} fallidas",messageTemplates:"Plantillas de mensajes",messageTemplatesDescription:"Personalice los mensajes de notificación para cada evento.",apiKeys:"Claves API",apiKeysDescription:"Cree claves API para integraciones externas y webhooks.",createKey:"Crear clave",apiKeyCreated:"Clave API creada correctamente",apiKeyCopyWarning:"¡Copie esta clave ahora; no se volverá a mostrar!",useInApiBrowser:"Usar en el explorador de API",createNewApiKey:"Crear nueva clave API",keyName:"Nombre de la clave",keyNamePlaceholder:"p. ej., Home Assistant, OctoPrint",readStatus:"Leer estado",readStatusDescription:"Ver el estado de la impresora y la cola",manageQueue:"Gestionar la cola",manageQueueDescription:"Añadir y quitar elementos de la cola de impresión",controlPrinter:"Controlar la impresora",controlPrinterDescription:"Pausar, reanudar y detener impresiones",manageLibrary:"Gestionar biblioteca",manageLibraryDescription:"Subir, renombrar y eliminar archivos de la biblioteca; importar modelos desde MakerWorld",manageInventory:"Gestionar inventario",manageInventoryDescription:"Crear, actualizar y eliminar bobinas y registros de inventario. Necesario para los quioscos SpoolBuddy (escaneo NFC, lecturas de balanza, comandos del sistema del quiosco).",libraryBadge:"Biblioteca",inventoryBadge:"Inventario",cloudAccess:"Permitir el acceso a la nube",cloudAccessDescription:"Leer los preajustes y filamentos de Bambu Cloud en su nombre. Requiere que haya iniciado sesión en Bambu Cloud.",cloudBadge:"Nube",updateEnergyCost:"Actualizar el precio de la electricidad",updateEnergyCostDescription:"Permite que esta clave envíe por POST un nuevo precio de electricidad por kWh a /settings/electricity-price. Útil para las automatizaciones de tarifa dinámica de Home Assistant (Tibber, Octopus, etc.). Este es el único campo de ajustes que se puede escribir mediante una clave API.",energyCostBadge:"Energía",legacyKey:"Heredada",legacyKeyTooltip:"Creada antes de la propiedad por usuario; vuelva a crearla para usar el acceso a la nube",unnamedKey:"Clave sin nombre",lastUsed:"Usada por última vez",read:"Lectura",control:"Control",createFirstKey:"Cree su primera clave",webhookEndpoints:"Puntos de conexión de webhook",webhookApiKeyHint:"Use su clave API en la cabecera X-API-Key.",webhook:{getAllStatus:"Obtener el estado de todas las impresoras",getSpecificStatus:"Obtener el estado de una impresora concreta",addToQueue:"Añadir a la cola de impresión",pausePrint:"Pausar impresión",resumePrint:"Reanudar impresión",stopPrint:"Detener impresión"},apiBrowser:"Explorador de API",apiBrowserDescription:"Explore y pruebe todos los puntos de conexión de API disponibles.",apiKeyForTesting:"Clave API para pruebas",apiKeyPlaceholder:"Pegue aquí su clave API para probar los puntos de conexión autenticados...",apiKeyHint:"Esta clave se enviará como cabecera X-API-Key en las solicitudes.",deleteApiKeyTitle:"Eliminar clave API",deleteApiKeyMessage:"¿Está seguro de que desea eliminar esta clave API? Cualquier integración que use esta clave dejará de funcionar.",deleteKey:"Eliminar clave",amsDisplayThresholds:"Umbrales de visualización del AMS",amsThresholdsDescription:"Configure los umbrales de color para los indicadores de humedad y temperatura del AMS.",humidity:"Humedad",goodGreen:"Buena (verde)",fairOrange:"Aceptable (naranja)",aboveFairBad:"Por encima del umbral aceptable se muestra en rojo (mala)",fairAlsoDryingThreshold:"Este umbral también se usa para activar el secado automático cuando está habilitado",temperature:"Temperatura",goodBlue:"Buena (azul)",aboveFairHot:"Por encima del umbral aceptable se muestra en rojo (caliente)",historyRetention:"Retención del historial",keepSensorHistory:"Conservar el historial del sensor durante",historyRetentionDescription:"Los datos de humedad y temperatura más antiguos se eliminarán automáticamente",defaultPrintOptions:"Opciones de impresión predeterminadas",defaultPrintOptionsDescription:"Establezca valores predeterminados para las opciones de impresión al iniciar nuevas impresiones. Se pueden anular por impresión en el diálogo de impresión.",defaultBedLevelling:"Nivelación de la cama",defaultBedLevellingDesc:"Nivelar automáticamente la cama antes de imprimir",defaultFlowCali:"Calibración del flujo",defaultFlowCaliDesc:"Calibrar el flujo de extrusión",defaultVibrationCali:"Calibración de vibración",defaultVibrationCaliDesc:"Reducir los artefactos de resonancia",defaultLayerInspect:"Inspección de la primera capa",defaultLayerInspectDesc:"Inspección de la primera capa por IA",defaultTimelapse:"Time-lapse",defaultTimelapseDesc:"Grabar vídeo time-lapse",staggeredStart:"Inicio escalonado",staggeredStartDescription:"Tamaño de grupo e intervalo predeterminados al escalonar los inicios de lotes en varias impresoras. Se pueden anular por lote en la ventana de impresión.",plateClear:"Confirmación de cama despejada",requirePlateClear:"Requerir confirmación de cama despejada",requirePlateClearDescription:'Cuando está activado, el planificador espera la confirmación de cama despejada por impresora antes de iniciar impresiones en cola en impresoras con trabajos finalizados. Desactivar esto también oculta la insignia de estado de la cama y el botón "Marcar cama como despejada" en las tarjetas de impresora.',gcodeInjection:"Inyección de G-code",gcodeInjectionDescription:'Configure G-code personalizado para inyectar al inicio o al final de las impresiones para sistemas de impresión automática como Farmloop, SwapMod, AutoClear y Printflow 3D. Los fragmentos se configuran por modelo de impresora y se aplican cuando se activa "Inyectar G-code" en un elemento de la cola.',gcodeInjectionNoPrinters:"No se encontraron impresoras. Añada impresoras para configurar fragmentos de G-code.",gcodeStartLabel:"G-code de inicio",gcodeEndLabel:"G-code de fin",gcodeStartPlaceholder:"G-code añadido antes de que comience la impresión...",gcodeEndPlaceholder:"G-code añadido después de que termine la impresión...",staggerGroupSize:"Tamaño de grupo",staggerGroupSizeHelp:"Impresoras que se inician simultáneamente por grupo",staggerInterval:"Intervalo (minutos)",staggerIntervalHelp:"Retardo entre el inicio de cada grupo",queueDrying:"Secado automático de la cola",queueDryingDescription:"Secar automáticamente el filamento del AMS cuando la impresora está inactiva entre impresiones en cola. Usa el umbral de humedad de arriba para activar el secado.",queueDryingEnabled:"Activar el secado automático",queueDryingEnabledDescription:"Iniciar el secado del AMS automáticamente cuando la impresora está inactiva y la humedad supera el umbral",queueDryingBlock:"Esperar a que termine el secado",queueDryingBlockDescription:"Bloquear la cola de impresión hasta que termine el secado. Cuando está desactivado, las impresiones tienen prioridad sobre el secado.",ambientDryingEnabled:"Secado ambiental",ambientDryingEnabledDescription:"Secar automáticamente el filamento en impresoras inactivas cuando la humedad supera el umbral, incluso sin impresiones en cola.",dryingPresets:"Preajustes de secado",dryingPresetsDescription:"Temperatura y duración por tipo de filamento. El AMS 2 Pro usa temperaturas más bajas; el AMS-HT admite temperaturas más altas.",dryingFilament:"Filamento",printModal:"Ventana de impresión",expandCustomMapping:"Expandir el mapeo personalizado de forma predeterminada",expandCustomMappingDescription:"Al imprimir en varias impresoras, mostrar el mapeo de AMS por impresora expandido",authentication:"Autenticación",authEnabledDescription:"Su instancia está protegida con autenticación de usuario",authDisabledDescription:"Active para exigir el inicio de sesión y gestionar el acceso de los usuarios",authDisabledMessage:"Active la autenticación para crear cuentas de usuario, gestionar permisos y proteger su instancia de Bambuddy.",enableAuthentication:"Activar la autenticación",currentUser:"Usuario actual",changePassword:"Cambiar contraseña",admin:"Administrador",users:"Usuarios",addUser:"Añadir usuario",groups:"Grupos",addGroup:"Añadir grupo",system:"Sistema",noDescription:"Sin descripción",userCount:"{{count}} usuarios",permissionCount:"{{count}} permisos",createUser:"Crear usuario",username:"Nombre de usuario",enterUsername:"Introduzca el nombre de usuario",password:"Contraseña",enterPassword:"Introduzca la contraseña",passwordRequirements:"Al menos 8 caracteres, con una mayúscula, una minúscula, un dígito y un carácter especial.",confirmPassword:"Confirmar contraseña",confirmPasswordPlaceholder:"Confirme la contraseña",viewReleaseOnGitHub:"Ver la versión en GitHub",turnAllPlugsOn:"Encender todos los enchufes",turnAllPlugsOff:"Apagar todos los enchufes",clearNotificationLogs:"Borrar los registros de notificaciones",clearLogsMessage:"Esto eliminará permanentemente todos los registros de notificaciones de más de 30 días. Esta acción no se puede deshacer.",clearLogs:"Borrar registros",resetUiPreferences:"Restablecer las preferencias de la interfaz",resetUiPreferencesMessage:"Esto restablecerá todas las preferencias de la interfaz a sus valores predeterminados: orden de la barra lateral, tema, disposición del panel, modos de vista y preferencias de ordenación. Sus impresoras, archivos y ajustes del servidor NO se verán afectados. La página se recargará tras el restablecimiento.",resetPreferences:"Restablecer preferencias",deleteGroupTitle:"Eliminar grupo",deleteGroupMessage:"¿Está seguro de que desea eliminar este grupo? Los usuarios de este grupo perderán estos permisos.",deleteGroup:"Eliminar grupo",disableAuthenticationTitle:"Desactivar la autenticación",disableAuthenticationMessage:"¿Está seguro de que desea desactivar la autenticación? Esto hará que su instancia de Bambuddy sea accesible sin iniciar sesión. Todos los usuarios permanecerán en la base de datos, pero la autenticación se desactivará.",disableAuthentication:"Desactivar la autenticación",configureBambuddy:"Configurar Bambuddy",systemDefault:"Predeterminado del sistema",archiveSettings:"Ajustes de archivado",newWindow:"Ventana nueva",embeddedOverlay:"Superposición integrada",preferredSlicer:"Laminador preferido",preferredSlicerDescription:"Elija con qué aplicación de laminado abrir los archivos",orcaslicerKnownIssuesWarning:"OrcaSlicer 2.3.2 / 2.4.0-dev tienen errores conocidos de la CLI que impiden laminar muchos 3MF creados con Bambu — consulte las incidencias del proyecto original #12426 (cierre inesperado en archivos multiextrusor pintados) y #13386 (rechazo por validación estricta del rango de parámetros). Se recomienda Bambu Studio hasta que lleguen las correcciones.",useSlicerApi:"Usar la API del laminador",useSlicerApiDescription:"Cuando está activado, las acciones de «Laminar» abren la ventana del laminador integrada en la aplicación y llaman al contenedor auxiliar de la API del laminador. Cuando está desactivado (predeterminado), delegan en el laminador de escritorio mediante un esquema de URI.",slicerCard:"Laminador",orcaslicerApiUrl:"OrcaSlicer sidecar URL",bambuStudioApiUrl:"Bambu Studio sidecar URL",slicerApiUrlDescription:"URL del contenedor auxiliar de la API del laminador. Déjelo en blanco para usar los valores predeterminados de las variables de entorno SLICER_API_URL / BAMBU_STUDIO_API_URL.",slicerBundles:{title:"Paquetes del laminador",description:"Importe un paquete de preajustes de impresora (.bbscfg) exportado desde BambuStudio (Archivo → Exportar → Exportar paquete de preajustes → «Paquete de preajustes de impresora»). Una vez importado, las solicitudes de laminado pueden elegir preajustes del paquete por nombre sin volver a subir el trío de perfiles JSON.",uploadButton:"Subir paquete",uploading:"Subiendo…",loading:"Cargando paquetes…",empty:"Aún no se ha importado ningún paquete.",summary:"{{processCount}} preajustes de proceso · {{filamentCount}} de filamento",delete:"Eliminar",uploadSuccess:"{{name}} importado",uploadError:"Error al subir el paquete: {{message}}",deleteSuccess:"Paquete eliminado",deleteError:"Error al eliminar el paquete: {{message}}",confirmDeleteTitle:"¿Eliminar este paquete?",confirmDeleteMessage:'Las solicitudes de laminado que hagan referencia a "{{name}}" fallarán hasta que se vuelva a importar el paquete.'},externalCameras:"Cámaras externas",costTracking:"Seguimiento de costes",printsOnly:"Solo impresiones",totalConsumption:"Consumo total",dataManagement:"Gestión de datos",storageUsage:"Uso del almacenamiento",storageUsageDescription:"Desglose del uso de datos por categoría",storageUsageTotal:"Total",storageUsageErrors:"Errores",storageUsageOtherBreakdown:"Otros (incluye recursos estáticos, scripts y archivos de configuración)",storageUsageSystem:"Sistema",storageUsageData:"Datos",storageUsageUnavailable:"Información de uso del almacenamiento no disponible",clearNotificationLogsDescription:"Eliminar los registros de notificaciones de más de 30 días",resetUiPreferencesDescription:"Restablecer el orden de la barra lateral, el tema, los modos de vista y las preferencias de disposición. Las impresoras, los archivos y los ajustes no se ven afectados.",enableHomeAssistant:"Activar Home Assistant",enableMqtt:"Activar MQTT",useTls:"Usar TLS",enableMetricsEndpoint:"Activar el punto de conexión de métricas",availableMetrics:"Métricas disponibles",editUser:"Editar usuario",deleteUserTitle:"Eliminar usuario",groupName:"Nombre del grupo",leaveEmptyForAnonymous:"Dejar vacío para anónimo",leaveEmptyForNoAuth:"Dejar vacío para sin autenticación",enterNewPassword:"Introduzca la nueva contraseña",confirmNewPassword:"Confirme la nueva contraseña",enterGroupName:"Introduzca el nombre del grupo",enterDescriptionOptional:"Introduzca una descripción (opcional)",enterCurrentPassword:"Introduzca la contraseña actual",enterNewPasswordMin6:"Introduzca la nueva contraseña (mín. 6 caracteres)",toast:{keyCopied:"Clave copiada al portapapeles",copyFailed:"Error al copiar la clave",keyAddedToBrowser:"Clave añadida al explorador de API",clearLogsFailed:"Error al borrar los registros",uiPreferencesReset:"Preferencias de la interfaz restablecidas. Actualizando...",authDisabled:"Autenticación desactivada correctamente",authDisableFailed:"Error al desactivar la autenticación",apiKeyCreated:"Clave API creada",apiKeyDeleted:"Clave API eliminada",userCreated:"Usuario creado correctamente",userUpdated:"Usuario actualizado correctamente",userDeleted:"Usuario eliminado correctamente",groupCreated:"Grupo creado correctamente",groupUpdated:"Grupo actualizado correctamente",groupDeleted:"Grupo eliminado correctamente",fillRequiredFields:"Rellene todos los campos obligatorios",passwordsDoNotMatch:"Las contraseñas no coinciden",passwordTooShort:"La contraseña debe tener al menos 8 caracteres",passwordNeedsUppercase:"La contraseña debe contener al menos una letra mayúscula",passwordNeedsLowercase:"La contraseña debe contener al menos una letra minúscula",passwordNeedsDigit:"La contraseña debe contener al menos un dígito",passwordNeedsSpecial:"La contraseña debe contener al menos un carácter especial",enterGroupName:"Introduzca un nombre de grupo",settingsSaved:"Ajustes guardados",noPermissionUpdate:"No tiene permiso para cambiar los ajustes",cameraSettingsSaved:"Ajustes de la cámara guardados",enterCameraUrl:"Introduzca una URL de cámara",passwordChanged:"Contraseña cambiada correctamente",connectionFailed:"Error de conexión",testFailed:"La prueba falló",cameraConnected:"Cámara conectada{{resolution}}"},testConnection:"Probar conexión",catalog:{spoolCatalog:"Catálogo de bobinas",spoolCatalogDescription:"Pesos de bobinas vacías por marca/tipo. Se usa para la búsqueda automática de peso al añadir bobinas.",searchCatalog:"Buscar en el catálogo...",addNewEntry:"Añadir nueva entrada",namePlaceholder:"Nombre (p. ej., Bambu Lab - Plástico)",weight:"Peso",type:"Tipo",default:"Predeterminado",custom:"Personalizado",noMatch:"Ninguna entrada coincide con su búsqueda",empty:"No hay entradas en el catálogo",deleteEntry:"Eliminar entrada",deleteConfirm:'¿Está seguro de que desea eliminar "{{name}}"?',resetCatalog:"Restablecer catálogo",resetConfirm:"¿Restablecer el catálogo a los valores predeterminados? Esto eliminará todas las entradas personalizadas.",loadFailed:"Error al cargar el catálogo de bobinas",nameWeightRequired:"El nombre y el peso son obligatorios",entryAdded:"Entrada añadida",addFailed:"Error al añadir la entrada",entryUpdated:"Entrada actualizada",updateFailed:"Error al actualizar la entrada",entryDeleted:"Entrada eliminada",deleteFailed:"Error al eliminar la entrada",resetSuccess:"Catálogo restablecido a los valores predeterminados",resetFailed:"Error al restablecer el catálogo",exported:"Se exportaron {{count}} entradas",imported:"Se importaron {{added}} entradas ({{skipped}} omitidas)",importFailed:"Error al importar: formato JSON no válido",exportTooltip:"Exportar el catálogo a JSON",importTooltip:"Importar el catálogo desde JSON",resetTooltip:"Restablecer a los valores predeterminados",selectedCount:"{{count}} seleccionadas",deleteSelected:"Eliminar seleccionadas",bulkDeleteConfirm:"¿Está seguro de que desea eliminar {{count}} entradas?",bulkDeleted:"Se eliminaron {{count}} entradas",bulkDeleteFailed:"Error al eliminar las entradas",material:"Material",spoolWeight:"Peso de la bobina",color:"Color",updateSpoolWeight:"Actualizar el peso de la bobina",filamentUpdated:"Filamento actualizado",filamentUpdateFailed:"Error al actualizar el filamento",filamentUpdateInvalid:"Datos de filamento no válidos",keepExistingSpoolWeight:"Conservar el peso anterior para las bobinas existentes",keepExistingSpoolWeightDesc:"Las bobinas ya creadas con este tipo de filamento conservan el peso de tara anterior. Las bobinas nuevas usan el valor actualizado.",applyToAllSpools:"Aplicar a todas las bobinas",applyToAllSpoolsDesc:"Todos los cálculos de peso para este tipo de filamento usan inmediatamente el nuevo peso de tara."},colorCatalog:{title:"Catálogo de colores",description:"Colores de filamento por fabricante/material. Se usa para la búsqueda automática de color al añadir bobinas.",searchColors:"Buscar colores...",allManufacturers:"Todos los fabricantes",addNewColor:"Añadir nuevo color",manufacturer:"Fabricante",colorName:"Nombre del color",hex:"Hex",materialOptional:"Material (opcional)",showing:"Mostrando {{filtered}} de {{total}} colores",noMatch:"Ningún color coincide con su búsqueda",empty:"No hay colores en el catálogo",deleteColor:"Eliminar color",deleteConfirm:'¿Está seguro de que desea eliminar "{{name}}"?',resetCatalog:"Restablecer el catálogo de colores",resetConfirm:"¿Restablecer el catálogo a los valores predeterminados? Esto eliminará todos los colores personalizados.",sync:"Sincronizar",starting:"Iniciando...",syncTooltip:"Sincronizar desde FilamentColors.xyz (más de 2000 colores, puede tardar un minuto)",loadFailed:"Error al cargar el catálogo de colores",fieldsRequired:"El fabricante, el nombre del color y el color hexadecimal son obligatorios",colorAdded:"Color añadido",addFailed:"Error al añadir el color",colorUpdated:"Color actualizado",updateFailed:"Error al actualizar el color",colorDeleted:"Color eliminado",deleteFailed:"Error al eliminar el color",resetSuccess:"Catálogo de colores restablecido a los valores predeterminados",resetFailed:"Error al restablecer el catálogo",syncUpToDate:"Ya está actualizado ({{count}} colores comprobados)",syncComplete:"Se añadieron {{added}} colores nuevos ({{skipped}} ya existían)",syncError:"Error de sincronización",syncFailed:"Error al sincronizar desde FilamentColors.xyz",exported:"Se exportaron {{count}} colores",imported:"Se importaron {{added}} colores ({{skipped}} omitidos)",importFailed:"Error al importar: formato JSON no válido",selectedCount:"{{count}} seleccionados",deleteSelected:"Eliminar seleccionados",bulkDeleteConfirm:"¿Está seguro de que desea eliminar {{count}} colores?",bulkDeleted:"Se eliminaron {{count}} colores",bulkDeleteFailed:"Error al eliminar los colores"},dateFormat:"Formato de fecha",dateFormatUs:"EE. UU. (MM/DD/AAAA)",dateFormatEu:"UE (DD/MM/AAAA)",dateFormatIso:"ISO (AAAA-MM-DD)",timeFormat:"Formato de hora",timeFormat12:"12 horas (3:30 PM)",timeFormat24:"24 horas (15:30)",defaultPrinter:"Impresora predeterminada",defaultPrinterDescription:"Preseleccione esta impresora para subidas, reimpresiones y otras operaciones.",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"Arrastre los elementos de la barra lateral para reordenarlos. Restablezca aquí el orden predeterminado.",setDefault:"Establecer como predeterminado",sidebarOrderSetDefaultHint:"Establecer como predeterminado aplica el orden de menú actual a los usuarios que no han personalizado el suyo.",sidebarDefaultSet:"Se ha establecido el orden de menú predeterminado.",sidebarDefaultCleared:"Orden de menú predeterminado borrado.",sidebarDefaultFailed:"Error al establecer el orden de menú predeterminado.",reset:"Restablecer",darkMode:"Modo oscuro",lightMode:"Modo claro",active:"(activo)",background:"Fondo",accent:"Acento",style:"Estilo",bgNeutral:"Neutro",bgWarm:"Cálido",bgCool:"Frío",bgOled:"Negro OLED",bgSlate:"Azul pizarra",bgForest:"Verde bosque",accentGreen:"Verde",accentTeal:"Verde azulado",accentBlue:"Azul",accentOrange:"Naranja",accentPurple:"Morado",accentRed:"Rojo",styleClassic:"Clásico",styleGlow:"Resplandor",styleVibrant:"Vibrante",themeToggleHint:"Alterne entre modo oscuro, claro y sistema con el icono en la barra lateral.",autoArchivePrints:"Archivar impresiones automáticamente",autoArchiveDescription:"Guardar automáticamente los archivos 3MF cuando se completan las impresiones",saveThumbnailsDescription:"Extraer y guardar imágenes de vista previa de los archivos 3MF",captureFinishPhotoDescription:"Tomar una foto desde la cámara de la impresora cuando se completa la impresión. Bambuddy graba un breve timelapse durante la impresión para que la foto pueda obtenerse del momento previo al descenso de la cama; el archivo del timelapse se conserva si activaste el timelapse para esta impresión, de lo contrario se elimina automáticamente tras capturar la foto.",ffmpegNotInstalled:"ffmpeg no instalado",ffmpegRequired:"La captura de cámara requiere ffmpeg. Instálelo mediante <brew>brew install ffmpeg</brew> (macOS) o <apt>apt install ffmpeg</apt> (Linux).",camera:"Cámara",cameraViewMode:"Modo de vista de la cámara",cameraOverlayDescription:"La cámara se abre en una superposición redimensionable en la pantalla principal",cameraWindowDescription:"La cámara se abre en una ventana de navegador independiente",externalCamerasDescription:"Configure cámaras externas para sustituir la cámara integrada de la impresora. Admite transmisiones MJPEG, RTSP, capturas HTTP y cámaras USB (V4L2). Cuando está activada, la cámara externa se usa para la vista en directo y las fotos de finalización.",cameraPlaceholderUsb:"Ruta del dispositivo (/dev/video0)",cameraPlaceholderUrl:"URL de la cámara (rtsp://... o http://...)",cameraTypeMjpeg:"Transmisión MJPEG",cameraTypeRtsp:"Transmisión RTSP",cameraTypeSnapshot:"Captura HTTP",cameraTypeUsb:"Cámara USB (V4L2)",cameraSnapshotUrl:"URL de captura (opcional)",cameraSnapshotUrlPlaceholder:"http://192.168.1.61:1984/api/frame.jpeg?src=printer",cameraSnapshotUrlHelp:"URL de fotograma único usada para las miniaturas de notificaciones, las fotos de finalización, los fotogramas de time-lapse por capa y la detección de cama. El time-lapse y la detección de cama requieren cada uno su propio interruptor por impresora; esta URL es solo la fuente de imagen de la que se nutren cuando están activos. Déjelo en blanco para capturar desde la transmisión en directo de arriba. Útil para go2rtc (/api/frame.jpeg) y cámaras IP con un punto de conexión de captura dedicado.",cameraRotation:"Rotación",test:"Probar",connected:"Conectada",disconnected:"Desconectada",currency:"Moneda",defaultFilamentCost:"Coste predeterminado del filamento (por kg)",electricityCost:"Coste de la electricidad por kWh",energyDisplayMode:"Modo de visualización de la energía",energyModePrintDescription:"El panel muestra la suma de la energía usada durante las impresiones",energyModeTotalDescription:"El panel muestra la energía total de los enchufes inteligentes",fileManager:"Gestor de archivos",createArchiveEntry:"Crear una entrada de archivo al imprimir",createArchiveEntryDescription:"Al imprimir desde el gestor de archivos, crear opcionalmente una entrada de archivo",lowDiskSpaceWarning:"Advertencia de poco espacio en disco",lowDiskSpaceDescription:"Mostrar una advertencia cuando el espacio libre en disco caiga por debajo de este umbral",printerFirmware:"Firmware de la impresora",checkFirmwareDescription:"Buscar actualizaciones de firmware de la impresora de Bambu Lab",bambuddySoftware:"Software de Bambuddy",autoCheckDescription:"Buscar automáticamente nuevas versiones al iniciar",checkNow:"Buscar ahora",updateAvailableVersion:"Actualización disponible: v{{version}}",releaseNotes:"Notas de la versión",updateViaDocker:"Actualizar mediante Docker Compose:",updateViaHomeAssistant:"Las actualizaciones las gestiona el Supervisor de Home Assistant. Abra Ajustes → Complementos → Bambuddy en Home Assistant para instalar la nueva versión.",installUpdate:"Instalar actualización",latestVersionRunning:"Está ejecutando la versión más reciente",failedToCheckUpdates:"Error al buscar actualizaciones: {{error}}",backupRestore:"Copia de seguridad y restauración",backupRestoreDescription:"Exportar/importar ajustes y configurar la copia de seguridad en GitHub",goToBackup:"Ir a la copia de seguridad",externalUrl:"URL externa",externalUrlDescription:"La URL externa donde Bambuddy es accesible. Se usa para las imágenes de notificación y las integraciones externas.",bambuddyUrl:"URL de Bambuddy",externalUrlHint:"Incluya el protocolo y el puerto (p. ej., http://192.168.1.100:8000)",ftpRetry:"Reintento de FTP",ftpRetryDescription:"Reintentar las operaciones FTP cuando el Wi-Fi de la impresora no es fiable. Se aplica a las descargas de 3MF, las subidas de impresión, las descargas de time-lapse y las actualizaciones de firmware.",autoRetryDescription:"Reintentar automáticamente las operaciones FTP fallidas",retryAttempts:"Intentos de reintento",retryDelay:"Retardo de reintento",connectionTimeout:"Tiempo de espera de la conexión",time_one:"{{count}} vez",time_other:"{{count}} veces",second_one:"{{count}} segundo",second_other:"{{count}} segundos",nSeconds:"{{count}} segundos",increaseForWeakWifi:"Aumente para impresoras con Wi-Fi débil",homeAssistant:"Home Assistant",homeAssistantFullDescription:"Conéctese a Home Assistant para controlar enchufes inteligentes mediante la API REST de HA. Admite las entidades switch, light, input_boolean y script.",homeAssistantUrl:"URL de Home Assistant",longLivedAccessToken:"Token de acceso de larga duración",haTokenHint:"Cree un token en HA: Perfil → Tokens de acceso de larga duración → Crear token",connectionSuccessful:"Conexión correcta",connectionFailed:"Error de conexión",haConnectionSuccess:"Conexión con Home Assistant realizada correctamente.",haConnectionFailed:"Error al conectar con Home Assistant.",mqttPublishing:"Publicación MQTT",mqttDescription:"Publique los eventos de Bambuddy en un broker MQTT externo para la integración con Node-RED, Home Assistant y otros sistemas de automatización.",mqttEnableDescription:"Publicar eventos en un broker MQTT externo",brokerHostname:"Nombre de host del broker",port:"Puerto",usernameOptional:"Nombre de usuario (opcional)",passwordOptional:"Contraseña (opcional)",topicPrefix:"Prefijo del tema",topicPrefixHint:"Los temas serán: {{prefix}}/printers/<serial>/status, etc.",prometheusMetrics:"Métricas de Prometheus",prometheusEndpointDescription:"Exponer las métricas de la impresora en <code>/api/v1/metrics</code> para la supervisión con Prometheus/Grafana.",bearerTokenOptional:"Bearer Token (opcional)",bearerTokenHint:"Si se establece, las solicitudes deben incluir <code>Authorization: Bearer <token></code>",metricsConnectionStatus:"Estado de la conexión",metricsPrinterState:"Estado de la impresora (inactiva/imprimiendo/etc.)",metricsPrintProgress:"Progreso de la impresión 0-100%",metricsBedTemp:"Temperatura de la cama",metricsNozzleTemp:"Temperatura de la boquilla",metricsPrintsTotal:"Total de impresiones por resultado",metricsMore:"...y más (capas, ventiladores, cola, uso de filamento)",smartPlugsDescription:"Conecte enchufes inteligentes (Tasmota o Home Assistant) para automatizar el control de la alimentación y realizar el seguimiento del consumo de energía de sus impresoras.",allOn:"Encender todo",allOff:"Apagar todo",addSmartPlug:"Añadir enchufe inteligente",energySummary:"Resumen de energía",currentPower:"Potencia actual",plugsOnline:"{{reachable}}/{{total}} enchufes en línea",today:"Hoy",yesterday:"Ayer",total:"Total",enablePlugsForSummary:"Active enchufes para ver el resumen de energía",addNotificationProvider:"Añadir",systemBadge:"(Sistema)",creating:"Creando...",changing:"Cambiando...",deleteUserAndItems:"Eliminar el usuario Y sus elementos",deleteUserKeepItems:"Eliminar el usuario, conservar los elementos (quedan sin propietario)",ok:"Aceptar",twoFa:{totpTitle:"Aplicación de autenticación (TOTP)",totpDesc:"Use una aplicación de autenticación como Google Authenticator, Aegis o Authy.",emailOtpTitle:"OTP por correo",emailOtpDesc:"Enviar un código de un solo uso a {{email}} cuando inicie sesión.",emailOtpNoEmail:"Añada una dirección de correo a su cuenta para habilitar este método.",addEmailFirst:"Su cuenta no tiene dirección de correo. Pida a un administrador que añada una antes de activar el OTP por correo.",setupTotp:"Configurar la aplicación de autenticación",setupAuthApp:"Configurar la aplicación de autenticación",setupInstructions:"Escanee el código QR de abajo con su aplicación de autenticación y luego confirme con un código.",manualEntry:"¿No puede escanear? Introduzca este secreto manualmente:",scannedContinue:"He escaneado el código — continuar",enterCodeToConfirm:"Introduzca el código de 6 dígitos de su aplicación de autenticación para confirmar la configuración.",activate:"Activar",disableTotp:"Desactivar el autenticador",disableConfirmHint:"Introduzca un código TOTP válido o un código de respaldo para desactivar el autenticador.",totpDisabled:"Aplicación de autenticación desactivada.",emailOtpEnabled:"OTP por correo activado.",emailOtpDisabled:"OTP por correo desactivado.",smtpRequired:"Configure y pruebe primero los ajustes de SMTP.",invalidCode:"Código no válido. Inténtelo de nuevo.",enableEmailOtp:"Activar el OTP por correo",disableEmailOtp:"Desactivar el OTP por correo",emailSetupEnterCode:"Se ha enviado un código de verificación a su dirección de correo. Introdúzcalo a continuación para confirmar que es el propietario de este buzón.",verifyAndEnable:"Verificar y activar",emailDisablePasswordHint:"Introduzca la contraseña de su cuenta para confirmar la desactivación del OTP por correo.",passwordPlaceholder:"Introduzca su contraseña",backupCodesTitle:"Guarde sus códigos de respaldo",backupCodesWarning:"Guarde estos códigos en un lugar seguro. Cada código solo se puede usar una vez y no se volverán a mostrar.",backupCodesRemaining:"Quedan {{count}} códigos de respaldo",savedCodes:"He guardado mis códigos",regenBackup:"Regenerar los códigos de respaldo",regenBackupHint:"Introduzca su código TOTP actual para generar 10 códigos de respaldo nuevos. Todos los códigos de respaldo existentes quedarán invalidados.",newBackupCodes:"Nuevos códigos de respaldo",linkedAccounts:"Cuentas de SSO vinculadas",linkedAccountsDesc:"Estos proveedores de identidad externos están vinculados a su cuenta.",oidcUnlinked:"Cuenta desvinculada."},oidc:{title:"Proveedores SSO / OIDC",desc:"Configure proveedores de OpenID Connect para permitir el inicio de sesión único mediante proveedores de identidad externos.",addProvider:"Añadir proveedor",newProvider:"Nuevo proveedor",empty:"Aún no hay proveedores OIDC configurados.",created:"Proveedor creado.",updated:"Proveedor actualizado.",deleted:"Proveedor eliminado.",refreshIcon:"Actualizar icono",removeIcon:"Quitar icono",iconRefreshed:"Icono actualizado.",iconRemoved:"Icono eliminado.",iconFetchFailed:"No se pudo obtener el icono de la URL del proveedor.",deleteTitle:"Eliminar proveedor",deleteMessage:'¿Eliminar "{{name}}"? Todas las cuentas de usuario vinculadas se desconectarán.',form:{name:"Nombre visible",issuerUrl:"URL del emisor",clientId:"ID de cliente",clientSecret:"Secreto de cliente",scopes:"Ámbitos",iconUrl:"URL del icono (opcional)",enabled:"Activado",autoCreate:"Crear usuarios automáticamente",autoCreateDesc:"Crear automáticamente una cuenta local en el primer inicio de sesión.",autoLink:"Vincular cuentas existentes automáticamente",autoLinkDesc:"Vincular cuentas locales existentes haciendo coincidir el correo en el primer inicio de sesión.",secretHint:"dejar en blanco para conservar el actual",secretPlaceholder:"nuevo secreto",emailClaim:"Claim de correo",emailClaimDesc:"Claim de JWT usado como identidad de correo. Use «preferred_username» o «upn» para Azure Entra ID (que no envía email_verified). Use solo nombres de claim de confianza.",emailClaimPlaceholder:"correo",emailClaimCustomClaimAutoLinkWarning:"Los claims personalizados solo son seguros para la vinculación automática cuando el valor lo administra el inquilino (p. ej. upn / preferred_username de Azure Entra ID). No active la vinculación automática si su IdP permite a los usuarios autoasignarse este claim.",requireEmailVerified:"Requerir correo verificado",requireEmailVerifiedDesc:"Aceptar el claim de correo solo cuando el proveedor lo marca como verificado.",requireEmailVerifiedWarning:"Advertencia: el correo se aceptará incluso sin verificación. Úselo solo con proveedores de confianza.",requireEmailVerifiedAutoLink:"Desactive primero la vinculación automática para cambiar este ajuste.",defaultGroup:"Grupo predeterminado",defaultGroupDesc:"Grupo asignado a los usuarios creados automáticamente. Si no se establece, se usa Visores como alternativa.",defaultGroupViewersFallback:"Visores (predeterminado)"}},encryption:{title:"Estado del cifrado de MFA",enabledFromEnv:"Cifrado en reposo activado (clave de la variable de entorno MFA_ENCRYPTION_KEY)",enabledFromFile:"Cifrado en reposo activado (clave cargada del directorio de datos)",enabledGenerated:"Cifrado en reposo activado con una clave autogenerada",notConfigured:"Cifrado en reposo no configurado",notConfiguredDesc:"Los secretos TOTP y los client_secrets de OIDC se almacenan en texto plano. Establezca MFA_ENCRYPTION_KEY o reinicie Bambuddy con un directorio de datos con permisos de escritura para generar una automáticamente.",allEncrypted:"Todos los secretos de MFA están cifrados en reposo.",legacyRowsLabel:"Filas heredadas en texto plano",encryptedRowsLabel:"Filas cifradas",legacyRowsWarning:"Se detectaron {{count}} fila(s) heredada(s) en texto plano. Vuelva a guardar el proveedor OIDC o vuelva a registrar la aplicación de autenticación del usuario para migrar al almacenamiento cifrado.",backupHint:"La clave autogenerada se almacena en DATA_DIR/.mfa_encryption_key y se incluye en los ZIP de copia de seguridad local. Mantenga sus copias de seguridad seguras o establezca MFA_ENCRYPTION_KEY de forma explícita.",decryptionBrokenTitle:"Falta la clave de cifrado",decryptionBrokenError:"{{count}} registro(s) cifrado(s) no se pueden descifrar porque la clave de cifrado ya no está disponible. Restaure la MFA_ENCRYPTION_KEY anterior o DATA_DIR/.mfa_encryption_key para recuperarlos.",migrationErrorWarning:"{{count}} fila(s) heredada(s) no se pudieron volver a cifrar al iniciar. Revise los registros del servidor y reinicie Bambuddy para reintentarlo."}},notification:{printStarted:{title:"Impresión iniciada",body:"{{printer}}: {{filename}} ha empezado a imprimirse"},printCompleted:{title:"Impresión completada",body:"{{printer}}: {{filename}} se completó correctamente"},printFailed:{title:"Impresión fallida",body:"{{printer}}: {{filename}} ha fallado"},printStopped:{title:"Impresión detenida",body:"{{printer}}: {{filename}} se detuvo"},printProgress:{title:"Progreso de la impresión",body:"{{printer}}: {{filename}} está al {{percent}}%"},printerOffline:{title:"Impresora desconectada",body:"{{printer}} está desconectada"},printerError:{title:"Error de la impresora",body:"{{printer}}: {{error}}"},filamentLow:{title:"Filamento bajo",body:"{{printer}}: el filamento se está agotando"},maintenanceDue:{title:"Mantenimiento pendiente",body:"{{printer}}: {{items}} necesitan atención"}},errors:{generic:"Algo salió mal",networkError:"Error de red. Compruebe su conexión.",notFound:"No encontrado",unauthorized:"No autorizado",serverError:"Error del servidor",validationError:"Compruebe los datos introducidos",printerConnectionFailed:"Error al conectar con la impresora",saveFailed:"Error al guardar los cambios",deleteFailed:"Error al eliminar",loadFailed:"Error al cargar los datos"},hmsErrors:{title:"Errores - {{name}}",noErrors:"No hay errores",viewOnWiki:"Ver en la wiki de Bambu Lab",clearInstructions:"Borre los errores en la impresora para descartarlos aquí.",clearErrors:"Borrar errores",clearSuccess:"Errores HMS borrados",clearFailed:"Error al borrar los errores HMS"},mqttDebug:{title:"Registro de depuración MQTT",searchPlaceholder:"Buscar tema o carga útil...",noMessages:"Aún no se han registrado mensajes",startLoggingHint:"Haga clic en «Iniciar registro» para empezar a capturar mensajes MQTT",noMessagesMatch:"Ningún mensaje coincide con su filtro",adjustFilterHint:"Pruebe a ajustar su búsqueda o los criterios del filtro",incoming:"Entrante",outgoing:"Saliente",loggingStopped:"Registro detenido",loggingActive:"Registro activo - los mensajes se actualizarán automáticamente",startLogging:"Iniciar registro",stopLogging:"Detener registro",clearLog:"Borrar registro",topic:"Tema",timestamp:"Marca de tiempo",direction:"Dirección",all:"Todos"},printerFiles:{title:"Gestor de archivos",storageUsed:"Usado:",storageFree:"Libre:",filterPlaceholder:"Filtrar archivos...",deleteButton:"Eliminar",deleteFiles:"Eliminar {{count}} archivos",deleteFileConfirm:'¿Eliminar "{{name}}"? Esto no se puede deshacer.',deleteFilesConfirm:"¿Eliminar {{count}} archivos seleccionados? Esto no se puede deshacer.",noFiles:"No hay archivos en la impresora",loadingFiles:"Cargando archivos...",failedToLoad:"Error al cargar los archivos",toast:{filesDeleted:"Se eliminaron {{count}} archivo(s)",deleteFailed:"Error al eliminar: {{error}}"}},confirm:{delete:"¿Está seguro de que desea eliminar esto?",unsavedChanges:"Tiene cambios sin guardar. ¿Está seguro de que desea salir?",clearQueue:"¿Está seguro de que desea vaciar la cola?"},login:{title:"Inicio de sesión en Bambuddy",subtitle:"Inicie sesión en su cuenta",username:"Nombre de usuario",usernamePlaceholder:"Introduzca su nombre de usuario",usernameOrEmail:"Nombre de usuario o correo",usernameOrEmailPlaceholder:"Nombre de usuario o @ correo",password:"Contraseña",passwordPlaceholder:"Introduzca su contraseña",signIn:"Iniciar sesión",signingIn:"Iniciando sesión...",rememberMe:"Recordarme",forgotPassword:"¿Olvidó su contraseña?",loginSuccess:"Sesión iniciada correctamente",loginFailed:"Error al iniciar sesión",enterCredentials:"Introduzca el nombre de usuario y la contraseña",enterEmail:"Introduzca su dirección de correo",oidcLoginFailed:"Error en el inicio de sesión con OIDC",oidcErrors:{providerError:"El proveedor de identidad devolvió un error",missingParameters:"A la respuesta de OIDC le faltan parámetros obligatorios",invalidState:"El estado de OIDC no es válido o ya se ha usado",stateExpired:"La sesión de inicio de sesión con OIDC ha caducado — inténtelo de nuevo",providerNotFound:"Proveedor OIDC no encontrado",discoveryFailed:"Error al obtener el documento de descubrimiento de OIDC",invalidDiscovery:"El documento de descubrimiento de OIDC no es válido",networkError:"Error de red durante el intercambio de tokens de OIDC",badResponse:"Respuesta inesperada durante el intercambio de tokens de OIDC",noIdToken:"El proveedor OIDC no devolvió un token de ID",validationFailed:"Error en la validación del token de OIDC",nonceMismatch:"Discrepancia de nonce de OIDC — posible ataque de repetición",missingSubClaim:"Al token de OIDC le falta el claim sub",noLinkedAccount:"Ninguna cuenta local está vinculada a esta identidad de OIDC",accountInactive:"Su cuenta está inactiva",userResolutionFailed:"Error al resolver su cuenta",internalError:"Se produjo un error interno durante el inicio de sesión con OIDC",tokenExchangeFailed:"Error en el intercambio de tokens de OIDC"},forgotPasswordTitle:"Contraseña olvidada",forgotPasswordMessage:"Si ha olvidado su contraseña, póngase en contacto con el administrador de su sistema para restablecerla.",forgotPasswordEmailMessage:"Introduzca su dirección de correo y le enviaremos una contraseña nueva.",emailAddress:"Dirección de correo",emailPlaceholder:"su.correo@ejemplo.com",cancel:"Cancelar",sending:"Enviando...",sendResetEmail:"Enviar correo de restablecimiento",howToReset:"Cómo restablecer su contraseña:",resetStep1:"Póngase en contacto con su administrador de Bambuddy",resetStep2:"Pídale que restablezca su contraseña en la gestión de usuarios",resetStep3:"Puede establecerle una nueva contraseña temporal",resetStep4:"Inicie sesión con la nueva contraseña y cámbiela en Ajustes",gotIt:"Entendido",resetPassword:{title:"Establecer nueva contraseña",subtitle:"Introduzca y confirme su nueva contraseña a continuación.",newPassword:"Nueva contraseña",newPasswordPlaceholder:"Al menos 8 caracteres",confirmPassword:"Confirmar contraseña",confirmPasswordPlaceholder:"Repita la nueva contraseña",saving:"Guardando…",submit:"Establecer nueva contraseña",backToLogin:"Volver al inicio de sesión",passwordsDoNotMatch:"Las contraseñas no coinciden",passwordTooShort:"La contraseña debe tener al menos 8 caracteres",resetFailed:"Error al restablecer la contraseña. Es posible que el enlace haya caducado."},twoFA:{title:"Autenticación de dos factores",subtitle:"Su cuenta está protegida con 2FA. Introduzca el código de verificación a continuación.",methodAuthenticator:"Aplicación de autenticación",methodEmail:"Código por correo",methodBackup:"Código de respaldo",instructionsTotp:"Abra su aplicación de autenticación e introduzca el código de 6 dígitos para Bambuddy.",instructionsEmail:"Se ha enviado un código de 6 dígitos a su dirección de correo. Caduca en 10 minutos.",instructionsEmailNotSent:"Haga clic en el botón de abajo para recibir un código de verificación por correo.",instructionsBackup:"Introduzca uno de sus códigos de recuperación de respaldo de 8 caracteres. Cada código solo se puede usar una vez.",sendCodeButton:"Enviar código por correo",sendingCode:"Enviando...",resendCode:"Reenviar código",codeLabel:"Código de verificación",backupCodeLabel:"Código de respaldo",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"Verificar",verifyingButton:"Verificando...",backToLogin:"← Volver al inicio de sesión",orContinueWith:"o continuar con",signInWith:"Iniciar sesión con {{provider}}",enterCode:"Introduzca el código de verificación",sendCodeFailed:"Error al enviar el código de verificación",invalidCode:"Código no válido. Inténtelo de nuevo."}},setup:{title:"Configuración de Bambuddy",subtitle:"Configure la autenticación para su instancia de Bambuddy",enableAuth:"Activar la autenticación",adminAccount:"Cuenta de administrador",adminAccountDesc:"Si ya existen usuarios administradores, la autenticación se activará usando las cuentas de administrador existentes. Deje los campos de abajo vacíos para usar los administradores existentes, o introduzca nuevas credenciales para crear un nuevo usuario administrador.",adminUsername:"Nombre de usuario del administrador",adminPassword:"Contraseña del administrador",optionalIfAdminExists:"(opcional si existen usuarios administradores)",adminUsernamePlaceholder:"Introduzca el nombre de usuario del administrador (opcional)",adminPasswordPlaceholder:"Introduzca la contraseña del administrador (opcional)",confirmPassword:"Confirmar contraseña",confirmPasswordPlaceholder:"Confirme la contraseña del administrador",settingUp:"Configurando...",completeSetup:"Completar la configuración",toast:{authEnabledAdminCreated:"Autenticación activada y usuario administrador creado",authEnabledExistingAdmins:"Autenticación activada usando los usuarios administradores existentes",setupCompleted:"Configuración completada",enterBothCredentials:"Introduzca el nombre de usuario y la contraseña del administrador, o deje ambos vacíos para usar los usuarios administradores existentes",passwordsDoNotMatch:"Las contraseñas no coinciden",passwordTooShort:"La contraseña debe tener al menos 6 caracteres"}},changePassword:{title:"Cambiar contraseña",currentPassword:"Contraseña actual",currentPasswordPlaceholder:"Introduzca la contraseña actual",newPassword:"Nueva contraseña",newPasswordPlaceholder:"Introduzca la nueva contraseña (mín. 6 caracteres)",confirmPassword:"Confirmar nueva contraseña",confirmPasswordPlaceholder:"Confirme la nueva contraseña",passwordsDoNotMatch:"Las contraseñas no coinciden",passwordTooShort:"La contraseña debe tener al menos 6 caracteres",changing:"Cambiando...",success:"Contraseña cambiada correctamente",failed:"Error al cambiar la contraseña"},plateAlert:{title:"¡Impresión en pausa!",message:"Se han detectado objetos en la cama de impresión. La impresión se ha pausado automáticamente. Despeje la cama y reanude la impresión.",understand:"Entendido"},camera:{title:"Vista de la cámara",invalidPrinterId:"ID de impresora no válido",live:"En directo",snapshot:"Captura",restartStream:"Reiniciar la transmisión",refreshSnapshot:"Actualizar la captura",fullscreen:"Pantalla completa",exitFullscreen:"Salir de la pantalla completa",connectingToCamera:"Conectando con la cámara...",capturingSnapshot:"Capturando imagen...",connectionLost:"Conexión perdida",connectionFailed:"Error de conexión con la cámara",reconnecting:"Reconectando en {{countdown}} s... (intento {{attempt}}/{{max}})",reconnectNow:"Reconectar ahora",cameraUnavailable:"Cámara no disponible",cameraUnavailableDesc:"Asegúrese de que la impresora está encendida y conectada.",noCamera:"No hay cámara disponible",retry:"Reintentar",cameraStream:"Transmisión de la cámara",zoomOut:"Alejar",zoomIn:"Acercar",resetZoom:"Restablecer el zoom",recording:"Grabando",startRecording:"Iniciar grabación",stopRecording:"Detener grabación",chamberLight:"Conmutar la luz de la cámara",unavailable:"Cámara no disponible",diagnose:{button:"Diagnosticar",modalTitle:"Diagnóstico de la cámara",running:"Ejecutando el diagnóstico...",runFailed:"No se pudo ejecutar el diagnóstico: {{error}}",retry:"Ejecutar de nuevo",stage:{tcp_reachable:"Accesibilidad de la red",first_frame:"Captura de fotogramas",live_stream_active:"Transmisión en directo activa"},summary:{all_ok:"La cámara funciona. El diagnóstico completó todas las etapas correctamente.",live_stream_active_healthy:"La cámara está transmitiendo actualmente con fotogramas recientes — no se necesita ninguna prueba.",printer_unreachable:"La impresora no es accesible. Compruebe la dirección IP, la conexión de red y que la impresora está encendida.",camera_port_closed:"La impresora es accesible pero el puerto de la cámara está cerrado. Asegúrese de que el modo solo LAN y el modo desarrollador están activados en los ajustes de la impresora.",no_frame:"Se conectó a la cámara pero no se recibieron fotogramas. Inténtelo de nuevo o compruebe que la cámara está activada en los ajustes de la impresora.",unknown_failure:"El diagnóstico de la cámara falló por un motivo desconocido. Consulte el registro de soporte para más detalles."},meta:{protocol:"Protocolo",port:"Puerto",profile:"Perfil"}}},groups:{title:"Gestión de grupos",subtitle:"Gestione los grupos de permisos para el control de acceso",backToSettings:"Volver a Ajustes",createGroup:"Crear grupo",noPermission:"No tiene permiso para acceder a esta página.",system:"Sistema",noDescription:"Sin descripción",usersCount:"{{count}} usuarios",permissionsCount:"{{count}} permisos",edit:"Editar",delete:"Eliminar",toast:{created:"Grupo creado correctamente",updated:"Grupo actualizado correctamente",deleted:"Grupo eliminado correctamente",enterGroupName:"Introduzca un nombre de grupo"},modal:{editGroup:"Editar grupo",createGroup:"Crear grupo",cancel:"Cancelar",saving:"Guardando...",creating:"Creando...",saveChanges:"Guardar cambios"},form:{groupName:"Nombre del grupo",groupNamePlaceholder:"Introduzca el nombre del grupo",systemGroupWarning:"Los nombres de los grupos del sistema no se pueden cambiar",description:"Descripción",descriptionPlaceholder:"Introduzca una descripción (opcional)",permissions:"Permisos ({{count}} seleccionados)"},deleteModal:{title:"Eliminar grupo",message:"¿Está seguro de que desea eliminar este grupo? Los usuarios de este grupo perderán estos permisos.",confirm:"Eliminar grupo"},editor:{title:"Editar grupo",createTitle:"Crear grupo",search:"Buscar permisos...",selectAll:"Seleccionar todo",clearAll:"Borrar todo",permissionsSelected:"{{count}} seleccionados",noResults:"Ningún permiso coincide con su búsqueda"}},users:{title:"Gestión de usuarios",subtitle:"Gestione los usuarios y su acceso a su instancia de Bambuddy",backToSettings:"Volver a Ajustes",createUser:"Crear usuario",noPermission:"No tiene permiso para acceder a esta página.",admin:"Administrador",noGroups:"Sin grupos",active:"Activo",inactive:"Inactivo",edit:"Editar",delete:"Eliminar",system:"Sistema",noGroupsAvailable:"No hay grupos disponibles",table:{username:"Nombre de usuario",groups:"Grupos",status:"Estado",actions:"Acciones"},toast:{created:"Usuario creado correctamente",updated:"Usuario actualizado correctamente",deleted:"Usuario eliminado correctamente",fillRequired:"Rellene todos los campos obligatorios",passwordsDoNotMatch:"Las contraseñas no coinciden",passwordTooShort:"La contraseña debe tener al menos 6 caracteres",ldapProvisioned:'Usuario LDAP "{{username}}" aprovisionado'},modal:{createUser:"Crear usuario",editUser:"Editar usuario",cancel:"Cancelar",creating:"Creando...",saving:"Guardando...",saveChanges:"Guardar cambios",advancedAuthSubtitle:"con autenticación avanzada",tabsAriaLabel:"Origen del usuario",localTab:"Local",ldapTab:"LDAP",ldapSearchLabel:"Buscar en el directorio",ldapSearchPlaceholder:"Escriba un nombre de usuario, nombre o correo...",ldapMinChars:"Escriba al menos 2 caracteres para buscar",ldapTypeToSearch:"Empiece a escribir para buscar en el directorio LDAP",ldapSearching:"Buscando en el directorio...",ldapNoResults:"No hay usuarios coincidentes en el directorio",ldapSearchError:"Error en la búsqueda en el directorio. Compruebe el estado del servidor LDAP.",ldapAlreadyProvisioned:"Ya aprovisionado",ldapSelectedLabel:"Seleccionado",ldapProvision:"Aprovisionar usuario",ldapProvisioning:"Aprovisionando...",ldapErrorProvision:"Error en el aprovisionamiento. Compruebe el estado del servidor LDAP e inténtelo de nuevo."},form:{username:"Nombre de usuario",usernamePlaceholder:"Introduzca el nombre de usuario",email:"Correo",emailPlaceholder:"usuario@ejemplo.com",password:"Contraseña",passwordPlaceholder:"Introduzca la contraseña",confirmPassword:"Confirmar contraseña",confirmPasswordPlaceholder:"Confirme la contraseña",newPasswordPlaceholder:"Introduzca la nueva contraseña",confirmNewPasswordPlaceholder:"Confirme la nueva contraseña",leaveBlankToKeep:"dejar en blanco para conservar la actual",groups:"Grupos",optional:"opcional",autoGeneratedPassword:"Se generará automáticamente una contraseña segura y se enviará al usuario por correo.",passwordManagedByAdvancedAuth:"La contraseña la gestiona la autenticación avanzada. Use «Restablecer contraseña» para enviar una nueva contraseña al usuario por correo.",resetPassword:"Restablecer contraseña",resettingPassword:"Restableciendo la contraseña..."},deleteModal:{title:"Eliminar usuario",message:"¿Está seguro de que desea eliminar este usuario? Esta acción no se puede deshacer.",confirm:"Eliminar usuario"}},streamOverlay:{title:"Superposición de transmisión",invalidPrinterId:"ID de impresora no válido",cameraStream:"Transmisión de la cámara",progress:"Progreso",eta:"Tiempo estimado",printerIdle:"La impresora está inactiva",printerOffline:"Impresora desconectada",status:{printing:"Imprimiendo",paused:"En pausa",finished:"Finalizada",failed:"Fallida",idle:"Inactiva",unknown:"Desconocido"}},profiles:{title:"Perfiles",subtitle:"Gestione sus preajustes del laminador y las calibraciones de avance de presión",tabs:{bambuCloud:"Bambu Cloud",orcaCloud:"Orca Cloud",local:"Perfiles locales",kprofiles:"Perfiles K"},orcaCloud:{connectedAs:"Conectado como",logout:"Desconectar",noLogoutPermission:"No tienes permiso para desconectar",noConnectPermission:"No tienes permiso para conectar a Orca Cloud",retry:"Reintentar",back:"Usar otro método de inicio de sesión",connect:{title:"Conectar a Orca Cloud",description:"Inicia sesión en tu cuenta Orca Cloud para sincronizar tus perfiles de slicer en Bambuddy."},providers:{google:"Iniciar sesión con Google",apple:"Iniciar sesión con Apple",github:"Iniciar sesión con GitHub",email:"Iniciar sesión con correo y contraseña"},password:{title:"Iniciar sesión con correo y contraseña",email:"Correo electrónico",emailPlaceholder:"tu@ejemplo.com",password:"Contraseña",submit:"Iniciar sesión"},paste:{title:"Finalizar inicio de sesión",step1:"Se abrió una nueva pestaña con la página de inicio de sesión de Orca Cloud. Inicia sesión con tu cuenta de Orca.",step2:'Tu navegador será redirigido a una URL "localhost" que no se cargará. Es lo esperado — esa URL es lo que necesitamos.',step3:"Copia la URL completa desde la barra de direcciones del navegador y pégala abajo.",signInUrl:"Si la pestaña de inicio de sesión no se abrió, haz clic en esta URL:",label:"Pega aquí la URL de callback",placeholder:"http://localhost:41172/callback?code=...&state=...",submit:"Finalizar conexión"},profiles:{title:"Tus perfiles de Orca Cloud ({{count}})",refresh:"Actualizar",empty:"Aún no hay perfiles en tu cuenta de Orca Cloud."},toast:{connected:"Conectado a Orca Cloud como {{email}}",disconnected:"Desconectado de Orca Cloud"},errors:{startFailed:"No se pudo iniciar el inicio de sesión de Orca Cloud.",finishFailed:"No se pudo finalizar el inicio de sesión de Orca Cloud.",passwordFailed:"No se pudo iniciar sesión con ese correo y contraseña.",passwordEmpty:"Por favor introduce tanto tu correo como tu contraseña.",emptyPaste:"Pega la URL de callback desde tu navegador.",noCode:"Esa URL no parece un callback de Orca Cloud (sin parámetro code). Copia la URL completa desde la barra de direcciones."}},localProfiles:{title:"Perfiles locales",subtitle:"Importe y gestione preajustes del laminador desde OrcaSlicer",import:"Importar perfiles",importDesc:"Suelte aquí archivos .bbscfg, .bbsflmt, .orca_filament, .zip o .json",importing:"Importando...",search:"Buscar preajustes locales...",noPresets:"Aún no hay preajustes locales",noSearchResults:"Ningún preajuste coincide con su búsqueda",badge:"Local",edit:"Editar",delete:"Eliminar",cancel:"Cancelar",deleteConfirmTitle:"Eliminar preajuste",deleteConfirm:"¿Está seguro de que desea eliminar este preajuste? Esto no se puede deshacer.",source:"Origen",inheritsFrom:"Hereda de",filamentType:"Tipo",vendor:"Proveedor",compatiblePrinters:"Impresoras",nozzleTemp:"Temp. de la boquilla",cost:"Coste",density:"Densidad",pressureAdvance:"Avance de presión",filament:"Filamento",process:"Proceso",printer:"Impresora",toast:{importSuccess:"{{count}} preajuste(s) importado(s)",importSkipped:"{{count}} preajuste(s) omitido(s) (duplicados)",importError:"{{count}} error(es) durante la importación",deleted:"Preajuste eliminado",updated:"Preajuste actualizado"}},connectedAs:"Conectado como",logout:"Cerrar sesión",noLogoutPermission:"No tiene permiso para cerrar sesión",failedToLoad:"Error al cargar los perfiles",retry:"Reintentar",time:{justNow:"Ahora mismo",minsAgo:"hace {{count}} min",hoursAgo:"hace {{count}} h",daysAgo:"hace {{count}} d"},toast:{loggedOut:"Sesión cerrada"},login:{title:"Conectarse a Bambu Cloud",subtitle:"Sincronice sus preajustes del laminador entre dispositivos",email:"Correo",password:"Contraseña",region:"Región",regionGlobal:"Global",regionChina:"China",verificationCode:"Código de verificación",totpCode:"Código del autenticador",checkEmail:"Compruebe su correo ({{email}}) en busca de un código de 6 dígitos",enterTotpHint:"Introduzca el código de 6 dígitos de su aplicación de autenticación",accessToken:"Token de acceso",accessTokenHint:"Pegue su token de acceso de Bambu Cloud. Las cuentas de la región de China deben usar esta vía (vinculada al teléfono — inicio de sesión por correo no disponible). Consulte la wiki para saber cómo obtener el token de las cookies de MakerWorld.",back:"Atrás",loginButton:"Iniciar sesión",verifyButton:"Verificar",setTokenButton:"Establecer token",useToken:"Usar token de acceso en su lugar",useEmail:"Iniciar sesión con correo en su lugar",toast:{loggedIn:"Sesión iniciada correctamente",codeSent:"Código de verificación enviado a su correo",enterTotp:"Introduzca el código de su aplicación de autenticación",tokenSet:"Token establecido correctamente"}},presets:{myPreset:"Mi preajuste (editable)",duplicate:"Duplicar",editable:"Editable",failedToLoadDetails:"Error al cargar los detalles del preajuste",deleteConfirm:"¿Eliminar este preajuste?",deleteWarning:'Esto eliminará permanentemente "{{name}}" de Bambu Cloud. Esto no se puede deshacer.',noDuplicatePermission:"No tiene permiso para duplicar preajustes",noEditPermission:"No tiene permiso para editar preajustes",noDeletePermission:"No tiene permiso para eliminar preajustes",types:{filament:"Preajuste de filamento",printer:"Preajuste de impresora",process:"Preajuste de proceso"},toast:{deleted:"Preajuste eliminado",created:"Preajuste creado",updated:"Preajuste actualizado",duplicated:"Preajuste duplicado",fieldAdded:'Campo "{{key}}" añadido',exported:"Preajuste exportado"},baseLabel:"Base: {{name}}",currentLabel:"Actual: {{name}}",newPreset:"Nuevo preajuste",editPreset:"Editar preajuste",duplicatePreset:"Duplicar preajuste",createNewPreset:"Crear nuevo preajuste",customizeSettings:"Personalice los ajustes de su nuevo preajuste",compareWithBase:"Comparar con el preajuste base",compare:"Comparar",basePreset:"Preajuste base",selectBasePreset:"Seleccionar preajuste base...",presetName:"Nombre del preajuste",myCustomPreset:"Mi preajuste personalizado",inheritsFrom:"Hereda de",dropJsonToImport:"Suelte un JSON para importar",tabs:{common:"Común",allFields:"Todos los campos"},availableFields:"Campos disponibles",searchFieldsPlaceholder:"Buscar campos...",noMatchingFields:"No hay campos coincidentes",allFieldsAdded:"Todos los campos añadidos",addCustomField:"Añadir campo personalizado",yourOverrides:"Sus anulaciones",noOverridesYet:"Aún no hay anulaciones",clickFieldsToAdd:"Haga clic en los campos de la izquierda para añadirlos",saveAsTemplate:"Guardar como plantilla",jsonTip:"Consejo: arrastre y suelte un archivo .json en cualquier parte de esta ventana para importar ajustes"},cloudView:{searchPlaceholder:"Buscar preajustes...",templates:"Plantillas",refresh:"Actualizar",newPreset:"Nuevo preajuste",clearFilters:"Borrar filtros",compareMode:"Modo de comparación",selectAnotherPreset:"Seleccione otro preajuste de {{type}}",clickTwoPresets:"Haga clic en dos preajustes del mismo tipo para compararlos",selectFirst:"1. Seleccione el primero",selectSecond:"2. Seleccione el segundo",compareNow:"Comparar ahora",lastSynced:"Última sincronización:",showingCount:"Mostrando {{showing}} de {{total}} preajustes",noPresetsFound:"No se encontraron preajustes",columns:{filament:"Filamento",process:"Proceso",printer:"Impresora"},noFilamentPresets:"No hay preajustes de filamento",noProcessPresets:"No hay preajustes de proceso",noPrinterPresets:"No hay preajustes de impresora",filters:{type:"Tipo",owner:"Propietario",printer:"Impresora",nozzle:"Boquilla",filament:"Filamento",layer:"Capa",all:"Todos",myPresets:"Mis preajustes",builtIn:"Integrados",process:"Proceso"},noTemplatesPermission:"No tiene permiso para gestionar plantillas",noRefreshPermission:"No tiene permiso para actualizar perfiles",noCreatePermission:"No tiene permiso para crear preajustes"},templates:{title:"Plantillas rápidas",noTemplates:"Aún no hay plantillas",createFirst:"Cree plantillas desde el editor de preajustes",typeFilter:"Tipo:",deleteTitle:"Eliminar plantilla",deleteWarning:"Esta acción no se puede deshacer",deleteConfirm:'¿Está seguro de que desea eliminar "{{name}}"?',namePlaceholder:"Nombre de la plantilla",descriptionPlaceholder:"Descripción",settingsJson:"Ajustes (JSON)",fieldsCount:"{{count}} campos",shownInModals:"Mostrada en las ventanas",hiddenInModals:"Oculta en las ventanas",apply:"Aplicar",toast:{deleted:"Plantilla eliminada",updated:"Plantilla actualizada",created:"Plantilla creada",applied:"Plantilla aplicada"}}},support:{debugLoggingActive:"El registro de depuración está activo",manageLogs:"Gestionar",collectItem7:"Conectividad de la impresora y versiones de firmware",collectItem8:"Estado de las integraciones (Spoolman, MQTT, HA)",collectItem9:"Interfaces de red (solo subredes)",collectItem10:"Versiones de los paquetes de Python",collectItem11:"Comprobaciones de estado de la base de datos",collectItem12:"Detalles del entorno de Docker",bundleGenerating:"Generando paquete...",bundleStepConnection:"Ejecutando comprobaciones de conectividad de impresoras",bundleStepVirtualPrinters:"Ejecutando comprobaciones de configuración de impresoras virtuales",bundleStepLogScan:"Analizando los registros recientes en busca de problemas conocidos",bundleStepBuild:"Creando el archivo ZIP del paquete de soporte"},fileManager:{title:"Gestor de archivos",subtitle:"Organice y gestione sus archivos de impresión",uploadFiles:"Subir archivos",newFolder:"Nueva carpeta",folderName:"Nombre de la carpeta",folderNamePlaceholder:"p. ej., Piezas funcionales",renameFile:"Renombrar archivo",renameFolder:"Renombrar carpeta",invalidFilenameChar:'El carácter "{{char}}" no está permitido en nombres de archivos de impresión. La tarjeta SD de la impresora rechaza: < > : " / \\ | ? *',moveFiles:"Mover {{count}} archivo(s)",rootNoFolder:"Raíz (sin carpeta)",current:"actual",linkFolder:"Vincular carpeta",linkFolderDescription:'Vincule "{{name}}" a un proyecto o archivo para un acceso rápido.',project:"Proyecto",archive:"Archivo",noProjectsFound:"No se encontraron proyectos",noArchivesFound:"No se encontraron archivos",unlink:"Desvincular",link:"Vincular",dragDropFiles:"Arrastre y suelte archivos aquí",dropFilesHere:"Suelte archivos aquí",orClickToBrowse:"o haga clic para examinar",allFileTypesSupported:"Se admiten todos los tipos de archivo. Los archivos ZIP se extraerán.",zipFilesDetected:"Archivos ZIP detectados",zipExtractOptions:"Los archivos ZIP se extraerán. Elija cómo gestionar la estructura de carpetas:",preserveZipStructure:"Conservar la estructura de carpetas del ZIP",createFolderFromZip:"Crear una carpeta a partir del nombre del archivo ZIP",stlThumbnailGeneration:"Generación de miniaturas STL",zipMayContainStl:"Los archivos ZIP pueden contener archivos STL. Se pueden generar miniaturas durante la extracción.",thumbnailsCanBeGenerated:"Se pueden generar miniaturas para los archivos STL. Los modelos grandes pueden tardar más en procesarse.",generateThumbnailsForStl:"Generar miniaturas para los archivos STL",threemfDetected:"Archivos 3MF detectados",threemfExtractionInfo:"El modelo de impresora, el material, el color y los ajustes de impresión se extraerán automáticamente de los archivos 3MF.",willBeExtracted:"Se extraerá",filesExtracted:"{{count}} archivos extraídos",uploadComplete:"Subida completada: {{succeeded}} con éxito",uploadFailed:"Error al subir",zipFilesFailed:"{{count}} archivos fallidos",uploading:"Subiendo...",changeLink:"Cambiar enlace...",linkTo:"Vincular a...",linkToProjectOrArchive:"Vincular a un proyecto o archivo",addToQueue:"Añadir a la cola",schedulePrint:"Programar",generateThumbnail:"Generar miniatura",generateThumbnails:"Generar miniaturas",generateThumbnailsForMissing:"Generar miniaturas para los archivos STL que no las tienen",gridView:"Vista de cuadrícula",listView:"Vista de lista",lowDiskSpaceWarning:"Advertencia de poco espacio en disco",lowDiskSpaceDetails:"Solo {{free}} libres de {{total}} en total. El umbral está establecido en {{threshold}} GB en los ajustes.",files:"Archivos",folders:"Carpetas",size:"Tamaño",free:"Libre",allFiles:"Todos los archivos",allExternal:"Externos",externalIsEmpty:"Sin archivos externos",externalEmptyDescription:"Los archivos de tus carpetas externas vinculadas aparecerán aquí.",wrap:"Ajustar",enableTextWrapping:"Activar el ajuste de texto",disableTextWrapping:"Desactivar el ajuste de texto",collapse:"Contraer",collapseFoldersByDefault:"Contraer las carpetas de forma predeterminada",expandFoldersByDefault:"Expandir las carpetas de forma predeterminada",dragToResizeTooltip:"Arrastre para redimensionar, doble clic para restablecer",searchFiles:"Buscar archivos...",allTypes:"Todos los tipos",prints:"Impresiones",ascending:"Ascendente",descending:"Descendente",resultsCount:"{{showing}} de {{total}} archivos",selectAll:"Seleccionar todo",deselectAll:"Deseleccionar todo",selected:"{{count}} seleccionados",adding:"Añadiendo...",loadingFiles:"Cargando archivos...",folderIsEmpty:"La carpeta está vacía",noFilesYet:"Aún no hay archivos",folderEmptyDescription:"Suba archivos o mueva archivos a esta carpeta para empezar.",noFilesDescription:"Suba archivos para empezar a organizar sus archivos relacionados con la impresión.",noMatchingFiles:"No hay archivos coincidentes",noMatchingFilesDescription:"Ningún archivo coincide con su búsqueda o los criterios de filtro actuales.",clearFilters:"Borrar filtros",printedCount:"Impreso {{count}} veces",uploadedBy:"Subido por",deleteFolder:"Eliminar carpeta",deleteFile:"Eliminar archivo",deleteFilesCount:"Eliminar {{count}} archivos",deleteFolderConfirm:"¿Está seguro de que desea eliminar esta carpeta? Todos los archivos que contiene también se eliminarán.",deleteFileConfirm:"¿Está seguro de que desea eliminar este archivo?",deleteFilesConfirm:"¿Está seguro de que desea eliminar {{count}} archivos seleccionados? Esta acción no se puede deshacer.",deleting:"Eliminando...",noPermissionRenameFolder:"No tiene permiso para renombrar carpetas",noPermissionLinkFolder:"No tiene permiso para vincular carpetas",noPermissionDeleteFolder:"No tiene permiso para eliminar carpetas",noPermissionPrint:"No tiene permiso para imprimir",noPermissionAddToQueue:"No tiene permiso para añadir a la cola",noPermissionSlice:"No tiene permiso para laminar archivos",noPermissionDownload:"No tiene permiso para descargar archivos",noPermissionRenameFile:"No tiene permiso para renombrar este archivo",noPermissionGenerateThumbnail:"No tiene permiso para generar miniaturas",noPermissionDeleteFile:"No tiene permiso para eliminar este archivo",noPermissionCreateFolder:"No tiene permiso para crear carpetas",noPermissionUpload:"No tiene permiso para subir archivos",noPermissionMoveFiles:"No tiene permiso para mover archivos",noPermissionDeleteFiles:"No tiene permiso para eliminar archivos",linkExternal:"Vincular externa",linkExternalFolder:"Vincular carpeta externa",linkExternalFolderDescription:"Monte un directorio del host (NAS, USB, recurso compartido de red) en el gestor de archivos. Los archivos no se copian — se accede a ellos directamente desde la ruta original.",externalFolderNamePlaceholder:"p. ej., Impresiones del NAS",externalPath:"Ruta del host",externalPathHelp:"Ruta absoluta al directorio en el host de Docker. Debe estar montado por enlace en el contenedor.",readOnly:"Solo lectura",readOnlyHelp:"impide las subidas y eliminaciones",showHiddenFiles:"Mostrar archivos ocultos (con punto)",externalFolder:"Carpeta externa",scanFolder:"Escanear",toast:{folderCreated:"Carpeta creada",folderDeleted:"Carpeta eliminada",fileDeleted:"Archivo eliminado",filesDeleted:"Se eliminaron {{count}} archivos",filesMoved:"Archivos movidos",folderLinked:"Carpeta vinculada",folderUnlinked:"Carpeta desvinculada",externalFolderLinked:"Carpeta externa vinculada y escaneada",folderScanned:"Escaneo completado: {{added}} añadidos, {{removed}} eliminados",addedToQueue:"Se añadieron {{count}} archivo(s) a la cola",addedToQueuePartial:"Se añadieron {{added}} archivo(s), {{failed}} fallidos",failedToAddToQueue:"Error al añadir los archivos: {{error}}",fileRenamed:"Archivo renombrado",folderRenamed:"Carpeta renombrada",thumbnailsGenerated:"Se generaron {{count}} miniatura(s)",thumbnailsGeneratedPartial:"Se generaron {{succeeded}} miniatura(s), {{failed}} fallidas",noStlMissingThumbnails:"No hay archivos STL sin miniaturas",failedToGenerateThumbnails:"Error al generar las miniaturas: {{error}}",thumbnailGenerated:"Miniatura generada",failedToGenerateThumbnail:"Error al generar la miniatura: {{error}}"}},projects:{title:"Proyectos",subtitle:"Organice y haga el seguimiento de sus proyectos de impresión 3D",newProject:"Nuevo proyecto",editProject:"Editar proyecto",deleteProject:"Eliminar proyecto",projectName:"Nombre del proyecto",description:"Descripción",noProjects:"Aún no hay proyectos",noProjectsFiltered:"No hay proyectos {{status}}",noProjectsFilteredHelp:"No tiene ningún proyecto {{status}}. Los proyectos aparecerán aquí cuando cambie su estado.",createFirst:"Cree su primer proyecto para empezar a organizar impresiones relacionadas, hacer el seguimiento del progreso y gestionar sus construcciones.",createFirstButton:"Cree su primer proyecto",create:"Crear",files:"Archivos",prints:"Impresiones",plates:"camas",parts:"piezas",lastModified:"Última modificación",deleteConfirm:"¿Está seguro de que desea eliminar este proyecto? Los archivos y los elementos de la cola se desvincularán pero no se eliminarán.",addFiles:"Añadir archivos",removeFile:"Quitar archivo",viewDetails:"Ver detalles",namePlaceholder:"p. ej., Construcción de Voron 2.4",descriptionPlaceholder:"Descripción opcional...",urlLabel:"URL",urlPlaceholder:"https://makerworld.com/...",urlInvalid:"La URL debe empezar por http:// o https://",openExternalUrl:"Abrir la URL del proyecto",coverImageLabel:"Foto de portada",coverImageAlt:"Foto de portada del proyecto",coverImageUpload:"Subir",coverImageReplace:"Reemplazar",coverImageRemove:"Quitar",color:"Color",targetPlates:"Camas objetivo",targetPlatesPlaceholder:"p. ej., 25",targetPlatesHelp:"Número de trabajos de impresión",targetParts:"Piezas objetivo",targetPartsPlaceholder:"p. ej., 150",targetPartsHelp:"Total de objetos necesarios",tagsLabel:"Etiquetas (separadas por comas)",tagsPlaceholder:"p. ej., voron, funcional, regalo",dueDate:"Fecha límite",priority:"Prioridad",priorityLow:"Baja",priorityNormal:"Normal",priorityHigh:"Alta",priorityUrgent:"Urgente",statusActive:"Activo",statusCompleted:"Completado",statusArchived:"Archivado",done:"Hecho",completed:"completadas",failed:"fallidas",inQueue:"en cola",noPrintsYet:"Aún no hay impresiones",printJobs:"Trabajos de impresión (camas)",partsPrinted:"Piezas impresas",failedParts:"Piezas fallidas",import:"Importar",export:"Exportar",importProject:"Importar proyecto",exportAll:"Exportar todos los proyectos",loading:"Cargando proyectos...",noEditPermission:"No tiene permiso para editar proyectos",noDeletePermission:"No tiene permiso para eliminar proyectos",noCreatePermission:"No tiene permiso para crear proyectos",noImportPermission:"No tiene permiso para importar proyectos",noExportPermission:"No tiene permiso para exportar proyectos",toast:{created:"Proyecto creado",updated:"Proyecto actualizado",deleted:"Proyecto eliminado",imported:"Proyecto importado",multipleImported:"{{count}} proyectos importados",importFailed:"Error en la importación",exported:"Proyectos exportados (solo metadatos)"}},projectDetail:{notFound:"Proyecto no encontrado",backToProjects:"Volver a Proyectos",export:"Exportar",exportProject:"Exportar proyecto",noExportPermission:"No tiene permiso para exportar proyectos",noEditPermission:"No tiene permiso para editar proyectos",partOf:"Parte de:",priorityLabel:"Prioridad:",noPrints:"Aún no hay impresiones en este proyecto",status:{active:"Activo",completed:"Completado",archived:"Archivado"},priority:{low:"Baja",normal:"Normal",high:"Alta",urgent:"Urgente"},dueDate:{overdue:"Atrasado",today:"Vence hoy",daysLeft:"Quedan {{count}} días"},progress:{platesProgress:"Progreso de camas",partsProgress:"Progreso de piezas",printJobs:"trabajos de impresión",parts:"piezas",percentComplete:"{{percent}}% completado",remaining:"{{count}} restantes"},stats:{printJobs:"Trabajos de impresión",total:"total",failed:"{{count}} fallidos",partsPrinted:"{{count}} piezas impresas",printTime:"Tiempo de impresión",filamentUsed:"Filamento usado"},cost:{title:"Seguimiento de costes",filamentCost:"Coste del filamento",energy:"Energía",totalCost:"Coste total",total:"Total",includesBom:"incl. lista de materiales",budget:"Presupuesto",remaining:"Restante"},subProjects:{title:"Subproyectos ({{count}})"},notes:{title:"Notas",noEditPermission:"No tiene permiso para editar notas",placeholder:"Añada notas sobre este proyecto...",empty:"Aún no hay notas. Haga clic en Editar para añadir notas."},files:{title:"Archivos",linkFolders:"Vincule carpetas del gestor de archivos",forQuickAccess:"a este proyecto para un acceso rápido.",fileCount:"{{count}} archivo(s)",empty:"No hay carpetas vinculadas. Vaya al gestor de archivos y vincule una carpeta a este proyecto.",noFiles:"No hay archivos en esta carpeta.",print:"Imprimir ahora",addToQueue:"Añadir a la cola"},bom:{title:"Lista de materiales",acquired:"{{completed}}/{{total}} adquiridos",showAll:"Mostrar todo",hideDone:"Ocultar los hechos",addPart:"Añadir pieza",noAddPermission:"No tiene permiso para añadir piezas",partNamePlaceholder:"Nombre de la pieza (p. ej., tornillos M3x8)",partName:"Nombre de la pieza",qty:"Cant.",price:"Precio ({{currency}})",sourcingUrlPlaceholder:"URL de aprovisionamiento (opcional)",remarksPlaceholder:"Observaciones (opcional)",deletePart:"Eliminar pieza",deleteConfirm:'¿Está seguro de que desea eliminar "{{name}}"?',noUpdatePermission:"No tiene permiso para actualizar piezas",noEditPermission:"No tiene permiso para editar piezas",noDeletePermission:"No tiene permiso para eliminar piezas",totalCost:"Coste total:",empty:"No hay piezas en la lista de materiales. Añada hardware, componentes electrónicos u otros componentes para hacer el seguimiento de lo que hay que aprovisionar."},timeline:{title:"Cronología de actividad",empty:"Aún no hay actividad."},template:{saveAsTemplate:"Guardar como plantilla",noCreatePermission:"No tiene permiso para crear plantillas"},queue:{title:"Cola",viewAll:"Ver todo",printing:"{{count}} imprimiendo",queued:"{{count}} en cola"},prints:{title:"Impresiones ({{count}})"},toast:{projectUpdated:"Proyecto actualizado",partAdded:"Pieza añadida",partRemoved:"Pieza eliminada",exportFailed:"Error en la exportación",projectExported:"Proyecto exportado",templateCreated:"Plantilla creada"}},system:{title:"Información del sistema",version:"Versión",uptime:"Tiempo de actividad",cpuUsage:"Uso de la CPU",memoryUsage:"Uso de la memoria",diskUsage:"Uso del disco",networkInfo:"Información de la red",logs:"Registros",debugMode:"Modo de depuración",enableDebug:"Activar el registro de depuración",disableDebug:"Desactivar el registro de depuración",downloadLogs:"Descargar registros",clearLogs:"Borrar registros",dockerInfo:"Información de Docker",containerName:"Nombre del contenedor",imageName:"Nombre de la imagen",platform:"Plataforma",architecture:"Arquitectura"},library:{title:"Biblioteca de filamentos",addFilament:"Añadir filamento",editFilament:"Editar filamento",deleteFilament:"Eliminar filamento",vendor:"Proveedor",material:"Material",color:"Color",kFactor:"Factor K",temperature:"Temperatura",noFilaments:"No hay filamentos en la biblioteca",deleteConfirm:"¿Está seguro de que desea eliminar este filamento?",importFromPrinter:"Importar desde la impresora",exportToFile:"Exportar a un archivo"},slice:{title:"Laminar modelo",action:"Laminar",actionAll:"Laminar las {{count}} bandejas",actionAllTitle:"Laminar todas las bandejas en una salida única de varias bandejas (un solo archivo). La selección de filamento cubre cada hueco que defina el proyecto.",allPlatesToggle:"Laminar las {{count}} bandejas",slicing:"Laminando…",printer:"Perfil de impresora",process:"Perfil de proceso",filament:"Perfil de filamento",filamentSlot:"Filamento {{index}} ({{type}})",selectPreset:"— Seleccione un preajuste —",loadingPresets:"Cargando preajustes…",analyzingPlateFilaments:"Analizando los filamentos de la cama…",analyzingPlateFilamentsHint:"Ejecutando un laminado de vista previa para descubrir qué ranuras del AMS usa esta cama. Después se almacena en caché — volver a abrir es instantáneo.",previewToast:"Analizando {{name}} — {{elapsed}}",previewWithProgress:"Analizando {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",notUsedByPlate:"— no usado por esta cama",noPresetsForSlot:"No hay preajustes disponibles",otherPrinters:"Otras impresoras",presetsLoadFailed:"Error al cargar los preajustes. Abra Ajustes → Perfiles para importarlos primero.",refreshPresets:"Actualizar",refreshPresetsTitle:"Actualizar preajustes — recuperar los listados más recientes de la nube y los paquetes (úselo tras eliminar un preajuste en Bambu Studio o Bambu Handy)",allPresetsRequired:"Deben seleccionarse todos los preajustes",bundle:"Paquete del laminador",bundleNone:"— Ninguno (elegir preajustes individualmente) —",bundleAllRequired:"Deben elegirse el proceso del paquete y todas las ranuras de filamento",enqueuing:"Enviando el trabajo de laminado…",queued:"En cola…",failed:"Error al laminar. Consulte los registros del contenedor auxiliar del laminador.",startedToast:"Laminando {{name}} en segundo plano…",queuedToast:"En cola: {{name}} — {{elapsed}}",runningToast:"Laminando {{name}} — {{elapsed}}",runningWithProgress:"{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",runningWithProgressMultiPlate:"Bandeja {{plateIndex}} de {{plateCount}} • {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",completedToast:"{{name}} laminado",failedTitle:"Error al laminar",failedToast:"Error al laminar {{name}}: {{detail}}",tier:{local:"Importado",cloud:"Bambu Cloud",orcaCloud:"Orca Cloud",standard:"Estándar"},cloud:{notAuthenticated:"Inicie sesión en Bambu Cloud (Ajustes → Perfiles → Bambu Cloud) para ver sus preajustes de la nube.",expired:"La sesión de Bambu Cloud ha caducado — inicie sesión de nuevo para actualizar sus preajustes de la nube.",unreachable:"Bambu Cloud no es accesible en este momento. Los preajustes locales y estándar siguen funcionando."},orcaCloud:{notAuthenticated:"Inicia sesión en Orca Cloud (Perfiles → Orca Cloud) para ver tus preajustes Orca.",expired:"Sesión de Orca Cloud caducada — inicia sesión de nuevo para actualizar tus preajustes Orca.",unreachable:"Orca Cloud no está disponible ahora. Otros preajustes siguen funcionando."},bedType:{label:"Cama de impresión",auto:"Automático (usar el preajuste de proceso)",coolPlate:"Cool Plate",coolPlateSuperTack:"Cool Plate SuperTack",engineering:"Engineering Plate",highTemp:"High Temp Plate",texturedPEI:"Textured PEI Plate",smoothPEI:"Smooth PEI Plate"}},spoolman:{title:"Integración con Spoolman",enabled:"Spoolman activado",url:"URL de Spoolman",connected:"Conectado",disconnected:"No conectado",testConnection:"Probar conexión",sync:"Sincronizar",syncing:"Sincronizando...",lastSync:"Última sincronización",linkToSpoolman:"Vincular a Spoolman",openInSpoolman:"Abrir en Spoolman",unlinkSpool:"Desvincular bobina",unlinkConfirmTitle:"¿Desasignar la bobina?",unlinkConfirmMessage:"Esto quitará la bobina de esta ranura. Los datos de la bobina en sí permanecerán sin cambios.",selectSpool:"Seleccionar bobina",noUnlinkedSpools:"No hay bobinas sin asignar disponibles",linkSuccess:"Bobina asignada correctamente",linkFailed:"Error al asignar la bobina",unlinkSuccess:"Bobina desasignada correctamente",unlinkFailed:"Error al desasignar la bobina",linkedSpool:"Bobina asignada",spoolId:"ID de la bobina",fillSourceLabel:"(Spoolman)",weight:"Peso",remaining:"Restante",disableWeightSync:"Desactivar la sincronización del peso estimado del AMS",disableWeightSyncDesc:"No actualizar la capacidad restante a partir de las estimaciones del AMS. Use esto si prefiere el seguimiento del uso de Spoolman a las estimaciones del AMS basadas en porcentajes. Las bobinas nuevas seguirán usando la estimación del AMS como su peso inicial.",reportPartialUsage:"Informar del uso parcial en las impresiones fallidas",reportPartialUsageDesc:"Cuando una impresión falla o se cancela, informar del filamento estimado usado hasta ese punto según el progreso de las capas."},inventory:{title:"Inventario de bobinas",subtitle:"Gestione sus bobinas",spoolmanMixedContentTitle:"Spoolman no se puede cargar por HTTPS — contenido mixto bloqueado por su navegador",spoolmanMixedContentBody:"Bambuddy se sirve por HTTPS (mediante su proxy inverso), pero su URL de Spoolman sigue siendo HTTP sin cifrar. Los navegadores bloquean el contenido mixto por seguridad, por lo que la interfaz integrada de Spoolman no se puede mostrar. Spoolman debe ser accesible por HTTPS para que esto funcione.",spoolmanMixedContentFixReverseProxy:"Ponga Spoolman tras el mismo proxy inverso que Bambuddy (Traefik / Nginx / Caddy) con HTTPS y luego actualice la URL de Spoolman en Ajustes a la nueva dirección HTTPS.",spoolmanMixedContentFixOpenNewTab:"Como solución alternativa, abra Spoolman en una pestaña nueva del navegador por HTTP — las reglas de contenido mixto solo se aplican a los marcos integrados, por lo que una pestaña independiente sí funciona.",spoolmanOpenInNewTab:"Abrir Spoolman en una pestaña nueva",labels:{title:"Imprimir etiquetas de bobinas",selectedCount:"{{count}} seleccionadas",pickSpools:"Elija para qué bobinas imprimir etiquetas:",searchPlaceholder:"Buscar nombre, marca o n.º de ID",filterByMaterial:"Material:",allMaterials:"Todos",selectVisible:"Seleccionar todas las visibles ({{count}})",deselectVisible:"Deseleccionar las visibles",clearAll:"Borrar todo",noSpoolsToShow:"No hay bobinas que mostrar. Ajuste su filtro e inténtelo de nuevo.",noMatches:"Ninguna bobina coincide con la búsqueda o el filtro actuales.",printOne:"Imprimir etiqueta para esta bobina",printLabels:"Imprimir etiquetas…",bulkTitle:"Elija las bobinas para las que imprimir etiquetas de las {{count}} mostradas actualmente",noSpoolsTitle:"No hay bobinas que etiquetar",error:"No se pudieron generar las etiquetas: {{msg}}",sortBy:{label:"Ordenar:",id:"Por ID",color:"Por color"},templates:{amsHolderSmall:{label:"Soporte de AMS — pequeño (74 × 33 mm)",hint:"Una etiqueta por página; coincide con la etiqueta imprimible del modelo 752566 de MakerWorld (AMS Filament Label Holder)."},amsHolderLarge:{label:"Soporte de AMS — grande (75 × 55 mm)",hint:"Una etiqueta por página; encaja en la variante con inserto de cartulina del AMS Filament Label Holder. Lo bastante amplia para muestra de color, marca, material, ID y código QR."},box40x30:{label:"Etiqueta de caja (40 × 30 mm)",hint:"Una etiqueta por página; tamaño de rollo DK/Brother habitual, adecuado para etiquetas de bolsas de filamento y cajas de almacenamiento."},box:{label:"Box label (62 × 29 mm)",hint:"Una etiqueta por página; dimensionada para las etiquetas pequeñas de Brother PT/QL y Dymo."},averyL7160:{label:"Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)",hint:"Hojas de tamaño UE; 21 etiquetas por página A4."},avery5160:{label:"Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)",hint:"Hojas de tamaño EE. UU.; 30 etiquetas por página Letter."}}},addSpool:"Añadir bobina",editSpool:"Editar bobina",copySpool:"Copiar bobina",material:"Material",selectMaterial:"Seleccionar material...",subtype:"Subtipo",brand:"Marca",searchBrand:"Buscar marca...",useCustomBrand:'Usar "{{brand}}"',useCustomMaterial:"Usar material personalizado: {{material}}",colorName:"Nombre del color",colorNamePlaceholder:"Blanco jade, Rojo fuego...",color:"Color",hexColor:"Color hexadecimal",pickColor:"Elegir color personalizado",labelWeight:"Peso de la etiqueta",coreWeight:"Peso de la bobina vacía",searchSpoolWeight:"Buscar peso de la bobina...",weightUsed:"Usado",currentWeight:"Peso restante",measuredWeight:"Peso medido",spoolName:"Bobina",costPerKg:"Coste por kg",storageLocation:"Ubicación de almacenamiento",storageLocationPlaceholder:"p. ej. Estante A, Cajón 1",openInInventory:"Abrir en el inventario",measuredWeightError:"El peso medido debe estar entre {{min}} g y {{max}} g.",slicerFilament:"Filamento del laminador",slicerFilamentName:"Nombre del preajuste del laminador",slicerPreset:"Preajuste del laminador",searchPresets:"Buscar preajustes de filamento...",selectedPreset:"Seleccionado",noPresetsFound:"No se encontraron preajustes",tempOverrides:"Anulaciones de temperatura",note:"Nota",notePlaceholder:"Cualquier nota adicional sobre esta bobina...",category:"Categoría",categoryPlaceholder:"p. ej. Producción, Prototipo, Cliente A",categoryNone:"Sin categoría",storageLocationNone:"Sin ubicación establecida",lowStockThresholdOverride:"Umbral de existencias bajas (esta bobina)",lowStockThresholdOverrideHelp:"Déjelo en blanco para usar el umbral global ({{global}}%).",clearRfid:"Borrar etiqueta RFID",rfidCleared:"Etiqueta RFID borrada",archive:"Archivar",restore:"Restaurar",noSpools:"Aún no hay bobinas. Añada su primera bobina para empezar.",noAvailableSpools:"No hay bobinas disponibles. Añada una bobina a su inventario o desasigne una de otra ranura primero.",kProfiles:"Perfiles K",addKProfile:"Añadir perfil K",assignSpool:"Asignar bobina",unassignSpool:"Desasignar",assignSuccess:"Bobina asignada y ranura del AMS configurada",assignFailed:"Error al asignar la bobina",selectSpool:"Seleccione una bobina para asignar a esta ranura",assigned:"Asignada",assigning:"Asignando...",searchSpools:"Buscar bobinas...",showAllSpools:"Mostrar todas las bobinas",spoolmanSpools:"Bobinas de Spoolman",allMaterials:"Todos los materiales",filterByBrand:"Filtrar por marca...",showArchived:"Mostrar archivadas",quickAdd:"Añadir rápido (existencias)",quantity:"Cantidad",stock:"Existencias",configured:"Configurada",spoolsCreated:"{{count}} bobinas creadas",spoolsPartiallyCreated:"{{created}} de {{total}} bobinas creadas (algunas fallaron)",spoolCreated:"Bobina creada",spoolUpdated:"Bobina actualizada",spoolDeleted:"Bobina eliminada",deepLinkSpoolNotFound:"Bobina no encontrada",deepLinkFetchFailed:"No se pudo cargar la bobina — inténtelo de nuevo",spoolArchived:"Bobina archivada",spoolRestored:"Bobina restaurada",kProfileSaveFailed:"No se pudieron guardar los ajustes del perfil K",syncWeightSpoolNotFound:"Bobina no encontrada — es posible que se haya eliminado",syncWeightSpoolmanUnreachable:"Spoolman no es accesible — inténtelo más tarde",syncWeightFailed:"Error al sincronizar el peso",spoolmanUnreachable:"Spoolman no es accesible — inténtelo de nuevo más tarde",deleteSpoolNotFound:"Bobina no encontrada — es posible que ya se haya eliminado",deleteFailed:"Error al eliminar la bobina",archiveSpoolNotFound:"Bobina no encontrada — es posible que ya se haya eliminado",archiveFailed:"Error al archivar la bobina",restoreSpoolNotFound:"Bobina no encontrada — es posible que ya se haya eliminado",restoreFailed:"Error al restaurar la bobina",saveFailed:"Error al guardar los cambios",tagClearFailed:"Error al borrar la etiqueta",deleteConfirm:"¿Está seguro de que desea eliminar esta bobina? Esto no se puede deshacer.",archiveConfirm:"¿Está seguro de que desea archivar esta bobina?",advancedSettings:"Ajustes avanzados",filamentInfoTab:"Información del filamento",paProfileTab:"Perfil PA",filamentInfo:"Filamento",additional:"Adicional",loadingPresets:"Cargando preajustes de la nube...",cloudConnected:"Nube conectada",cloudNotConnected:"Nube no conectada (usando los valores predeterminados)",recentColors:"Recientes",searchColors:"Buscar colores...",searchResults:"Resultados de búsqueda",allColors:"Todos los colores",commonColors:"Colores comunes",showLess:"Mostrar menos",showAll:"Mostrar todos",noColorsFound:"Ningún color coincide con su búsqueda",noResults:"No se encontraron coincidencias",extraColorsLabel:"Colores adicionales",extraColorsPlaceholder:"EC984C,#6CD4BC,A66EB9,D87694",extraColorsHint:"Pegue de 2 a 8 paradas hexadecimales, separadas por comas. Se muestra como un degradado.",extraColorsInvalid:"Se ignoró el hexadecimal no válido: {{tokens}}",colorEffectLabel:"Efecto",colorEffect:{none:"Ninguno",sparkle:"Destellos",wood:"Madera",marble:"Mármol",glow:"Brillante en la oscuridad",matte:"Mate",silk:"Seda",galaxy:"Galaxia",rainbow:"Arcoíris",metal:"Metal",translucent:"Translúcido",gradient:"Degradado",dualColor:"Bicolor",triColor:"Tricolor",multicolor:"Multicolor"},selectMaterialFirst:"Seleccione primero un material en la pestaña de información del filamento.",noPrintersConfigured:"No hay impresoras configuradas. Añada impresoras para usar perfiles PA.",matchingFilter:"Coincidentes",anyBrand:"Cualquier marca",anyVariant:"Cualquier variante",autoSelect:"Selección automática",matches:"coincidencias",match:"coincidencia",noMatches:"Sin coincidencias",connected:"Conectada",offline:"Desconectada",printerOffline:"La impresora está desconectada. Conéctela para ver los perfiles de calibración.",noKProfilesMatch:"Ningún perfil K coincide con el filamento seleccionado.",leftNozzle:"Boquilla izquierda",rightNozzle:"Boquilla derecha",profilesSelected:"perfil(es) de calibración seleccionado(s)",totalInventory:"Inventario total",totalConsumed:"Total consumido",byMaterial:"Por material",inPrinter:"En la impresora",lowStock:"Existencias bajas",sinceTracking:"Desde que comenzó el seguimiento",resetConsumedCounter:"Restablecer contador",resetConsumedCounterTooltip:"Poner a cero el contador de gramos consumidos de esta bobina. El peso restante no cambia.",resetConsumedCounterConfirm:"¿Restablecer a 0 el contador de gramos consumidos de esta bobina? Las impresiones futuras volverán a contar desde cero. La bobina en sí, su cálculo de peso restante y sus ajustes no cambian.",resetAllConsumedCounters:"Restablecer todos los contadores",resetAllConsumedCountersTooltip:"Poner a cero el contador de gramos consumidos de todas las bobinas. Los pesos restantes no cambian.",resetAllConsumedCountersConfirm:"¿Restablecer a 0 el contador de gramos consumidos de las {{count}} bobinas (incluidas las archivadas)? Esto borra la estadística «Total consumido» para que las impresiones futuras cuenten desde cero. Las bobinas y los pesos restantes no cambian.",consumedCounterReset:"Contador restablecido",allConsumedCountersReset:"Contador restablecido para {{count}} bobina(s)",resetConsumedCounterFailed:"Error al restablecer el contador",loadedInAms:"Cargada en AMS/ext.",remaining:"Restante",weightCheck:"Comprobación de peso",lastWeighed:"Pesada por última vez",neverWeighed:"Nunca pesada",search:"Buscar bobinas...",showing:"Mostrando",to:"a",of:"de",show:"Mostrar",spools:"bobinas",spool:"bobina",page:"Página",noSpoolsMatch:"No se encontraron resultados",noSpoolsMatchDesc:"Pruebe a ajustar su búsqueda o sus filtros para encontrar lo que busca.",active:"Activas",archived:"Archivadas",all:"Todas",used:"Usada",new:"Nueva",clearFilters:"Borrar filtros",table:"Tabla",cards:"Tarjetas",net:"Neto",groupSimilar:"Agrupar",groupedSpools:"{{count}} bobinas idénticas",groupedRows:"filas",columns:"Columnas",configureColumns:"Configurar columnas",configureColumnsDesc:"Arrastre para reordenar las columnas o use las flechas. Conmute la visibilidad con el icono del ojo.",visible:"visibles",reset:"Restablecer",cancel:"Cancelar",applyChanges:"Aplicar cambios",moveUp:"Subir",moveDown:"Bajar",hideColumn:"Ocultar columna",showColumn:"Mostrar columna",linkToSpool:"Vincular a bobina",tagLinked:"Etiqueta vinculada a la bobina",tagLinkFailed:"Error al vincular la etiqueta",tagAlreadyLinked:"La etiqueta ya está vinculada a otra bobina",unknownTag:"Se detectó una etiqueta RFID desconocida",usageHistory:"Historial de uso",noUsageHistory:"Aún no se ha registrado ningún uso",printName:"Nombre de la impresión",weightConsumed:"Peso consumido",clearHistory:"Borrar",historyCleared:"Historial de uso borrado",fillSourceLabel:"(Inv.)",lowStockThresholdError:"El umbral debe estar entre 0,1 y 99,9",assignMismatchTitle:"Discrepancia de material",assignMismatchMessage:'El material de la bobina seleccionada "{{spoolMaterial}}" no coincide con el material de la bandeja "{{trayMaterial}}" de {{location}}. ¿Asignar de todos modos?',assignMismatchConfirm:"Asignar de todos modos",assignPartialMismatchMessage:'El material de la bobina "{{spoolMaterial}}" es similar pero no coincide exactamente con "{{trayMaterial}}" en {{location}}. ¿Desea continuar?',assignProfileMismatchMessage:'El perfil de la bobina "{{spoolProfile}}" no coincide con el perfil de la bandeja "{{trayProfile}}" en {{location}}. ¿Desea continuar?',assignReconfigureNote:"La ranura del AMS se reconfigurará para usar el perfil de la bobina.",spoolmanFilamentCatalog:"Catálogo de filamentos de Spoolman",pickFromSpoolmanCatalog:"Elegir del catálogo de Spoolman…",spoolmanFilamentSelected:"Filamento seleccionado del catálogo de Spoolman",spoolmanFilamentUnlinked:"Vínculo del catálogo de filamentos borrado",noSpoolmanFilaments:"No se encontraron filamentos en el catálogo de Spoolman",spoolmanFilamentColorSwatch:"Color del filamento",spoolWeightManagedBySpoolman:"El peso de la bobina vacía se gestiona por tipo de filamento en Spoolman",spoolmanCatalogLoadFailed:"Error al cargar el catálogo de filamentos de Spoolman"},timelapse:{title:"Time-lapse",create:"Crear time-lapse",download:"Descargar",delete:"Eliminar",preview:"Vista previa",frameRate:"Velocidad de fotogramas",quality:"Calidad",processing:"Procesando...",noTimelapses:"No hay time-lapses disponibles"},ams:{title:"AMS",slot:"Ranura",empty:"Vacía",emptySlot:"Ranura vacía",slotEmpty:"Vacía",emptySlotReset:"No hay filamento asignado",unknown:"Desconocido",humidity:"Humedad",temperature:"Temperatura",filamentType:"Tipo de filamento",filamentColor:"Color",remaining:"Restante",history:"Historial del AMS",noHistory:"No hay historial disponible",configureSlot:"Configurar ranura",externalSpool:"Bobina externa",profile:"Perfil",kFactor:"Factor K",fill:"Rellenar",configure:"Configurar",used:"usado",remainingUnit:"restante"},printModal:{title:"Iniciar impresión",selectPrinter:"Seleccionar impresora",selectPlate:"Seleccionar cama",filamentMapping:"Mapeo de filamentos",totalCost:"Coste total:",slotRemainingShort:" - quedan {{grams}} g",printSettings:"Ajustes de impresión",bedLeveling:"Nivelación de la cama",flowCalibration:"Calibración del flujo",vibrationCalibration:"Calibración de vibración",layerInspection:"Inspección de la primera capa",timelapse:"Time-lapse",startPrint:"Iniciar impresión",addToQueue:"Añadir a la cola",cancel:"Cancelar",noPrintersAvailable:"No hay impresoras disponibles",printerBusy:"La impresora está ocupada",printerOffline:"La impresora está desconectada",sameTypeDifferentColor:"Mismo tipo, color distinto",filamentTypeNotLoaded:"Tipo de filamento no cargado",openCalendar:"Abrir calendario",leftNozzle:"I",rightNozzle:"D",leftNozzleTooltip:"Boquilla izquierda",rightNozzleTooltip:"Boquilla derecha",filamentOverride:"Anulación de filamento",filamentOverrideHint:"Anule opcionalmente los filamentos para la asignación basada en el modelo. El planificador comparará con los filamentos que ha seleccionado en lugar de los valores originales del 3MF.",originalFilament:"Original",overrideWith:"Anular con",resetToOriginal:"Restablecer al original",insufficientFilamentTitle:"No hay suficiente filamento",insufficientFilamentMessage:"Algunas bobinas asignadas tienen menos filamento restante del que necesita esta impresión:",insufficientFilamentLine:"{{printer}} - {{slot}}: necesita {{required}} g, restante {{remaining}} g",printAnyway:"Imprimir de todos modos",forceColorMatch:"Forzar la coincidencia de color",staggerPrinterStarts:"Escalonar los inicios de las impresoras",staggerGroupSize:"Tamaño de grupo",staggerInterval:"Intervalo (min)",staggerPreview:"{{printers}} impresoras → {{groups}} grupos de {{size}}, iniciando cada {{interval}} min",staggerLastGroup:"último grupo: {{count}}",staggerTotal:"total: {{minutes}} min",staggerToPrinters:"Escalonar en {{count}} impresoras",gcodeInjection:"Inyectar G-code de impresión automática"},backup:{includesEncryptionKey:"Las copias de seguridad locales incluyen el archivo de clave de cifrado de MFA (DATA_DIR/.mfa_encryption_key) para que un ZIP de copia de seguridad sea autónomo. Trate el ZIP como información sensible — cualquiera que tenga el archivo puede descifrar los secretos de cliente de OIDC y los secretos TOTP que contiene.",title:"Copia de seguridad y restauración",createBackup:"Crear copia de seguridad",restoreBackup:"Restaurar copia de seguridad",restoreDescription:"Reemplazar todos los datos desde un archivo de copia de seguridad",downloadBackup:"Descargar copia de seguridad",uploadBackup:"Subir copia de seguridad",lastBackup:"Última copia de seguridad",autoBackup:"Copia de seguridad automática",backupNow:"Hacer copia de seguridad ahora",restoreWarning:"Advertencia: restaurar una copia de seguridad sobrescribirá todos los datos actuales.",includeArchives:"Incluir archivos",includeSettings:"Incluir ajustes",includeProfiles:"Incluir perfiles",backupSuccess:"Copia de seguridad creada correctamente",restoreSuccess:"Copia de seguridad restaurada correctamente",backupFailed:"Error en la copia de seguridad",restoreFailed:"Error en la restauración",restoreNote:"La impresora virtual se detendrá durante la restauración",githubBackup:"Copia de seguridad en Git",enabled:"Activada",cloudLoginRequired:"Se requiere iniciar sesión en Bambu Cloud. Inicie sesión en Perfiles → Perfiles en la nube para activar la copia de seguridad en GitHub.",cloudLoginRequiredShort:"Se requiere iniciar sesión en la nube",githubDescription:"Sincronice automáticamente sus perfiles con un repositorio privado de GitHub para la copia de seguridad y el historial de versiones.",repoIsPrivate:"El repositorio es privado — es seguro hacer copias de seguridad en él.",repoIsPublicWarning:"El repositorio es PÚBLICO. Las copias de seguridad de Bambuddy incluyen credenciales de MQTT, tokens de Home Assistant, tokens de Prometheus, su correo de Bambu Cloud y los códigos de acceso de las impresoras mediante los perfiles K. El guardado está bloqueado hasta que haga el repositorio privado en los ajustes de su proveedor.",repoVisibilityUnknown:"No se pudo determinar la visibilidad del repositorio. Bambuddy se niega a hacer copias de seguridad en cualquier cosa que no se confirme como privada; el guardado se bloqueará.",repositoryUrl:"URL del repositorio",repoUrlPlaceholderGitHub:"https://github.com/username/repo-name",repoUrlPlaceholderGitea:"https://gitea.example.com/username/repo-name",repoUrlPlaceholderForgejo:"https://forgejo.example.com/username/repo-name",repoUrlPlaceholderGitLab:"https://gitlab.com/username/repo-name",allowInsecureHttp:"Permitir HTTP no seguro",allowInsecureHttpHint:"Actívelo para instancias autoalojadas en redes privadas sin TLS",personalAccessToken:"Token de acceso personal",tokenSaved:"(guardado)",enterNewToken:"Introduzca un nuevo token para actualizar",tokenHint:"Token de granularidad fina con permiso de lectura/escritura de Contents",branch:"Rama",provider:"Proveedor de Git",providerGitHub:"GitHub",providerGitLab:"GitLab",providerGitea:"Gitea",providerForgejo:"Forgejo",manualOnly:"Solo manual",hourly:"Cada hora",daily:"Diaria",weekly:"Semanal",includeInBackup:"Incluir en la copia de seguridad",kProfiles:"Perfiles K",kProfilesDescription:"Calibración de avance de presión de las impresoras conectadas",noPrintersConnected:"No hay impresoras conectadas",printersConnected:"{{connected}}/{{total}} conectadas",cloudProfiles:"Perfiles en la nube",cloudProfilesDescription:"Preajustes de filamento, impresora y proceso de Bambu Cloud",appSettings:"Ajustes de la aplicación",appSettingsDescription:"Configuración de Bambuddy (base de datos completa)",spoolInventory:"Inventario de bobinas",spoolInventoryDescription:"Bobinas de filamento, historial de uso y seguimiento de costes",printArchives:"Archivos de impresión",printArchivesDescription:"Metadatos del historial de impresión (sin archivos gcode/3MF)",lastBackupAt:"Última copia de seguridad:",noBackupsYet:"Aún no hay copias de seguridad",next:"Siguiente:",startingBackup:"Iniciando la copia de seguridad...",test:"Probar",enableBackup:"Activar la copia de seguridad",testConnection:"Probar conexión",enterRepoUrl:"Introduzca la URL del repositorio",enterRepoAndToken:"Introduzca la URL del repositorio y el token de acceso",repoRequired:"La URL del repositorio es obligatoria",tokenRequired:"El token de acceso es obligatorio",githubBackupEnabled:"Copia de seguridad en GitHub activada",tokenUpdated:"Token actualizado",settingsSaved:"Ajustes guardados",failedToSave:"Error al guardar: {{message}}",backupCompleteFiles:"Copia de seguridad completada - {{count}} archivos actualizados",backupSkippedNoChanges:"Copia de seguridad omitida - sin cambios",backupFailed2:"Error en la copia de seguridad: {{message}}",clearedLogs:"Se borraron {{count}} registros",failedToClearLogs:"Error al borrar los registros: {{message}}",history:"Historial",clear:"Borrar",date:"Fecha",status:"Estado",commit:"Confirmación",localBackup:"Copia de seguridad local",localBackupDescription:"Cree una copia de seguridad completa de sus datos de Bambuddy, incluida la base de datos, los archivos, las subidas y todos los archivos.",downloadBackupLabel:"Descargar copia de seguridad",completeBackupZip:"Copia de seguridad completa: base de datos + todos los archivos (ZIP)",download:"Descargar",preparingBackup:"Preparando la copia de seguridad...",creatingArchive:"Creando el archivo de copia de seguridad... Esto puede tardar un rato para archivos grandes.",downloadingFile:"Descargando el archivo de copia de seguridad...",backupDownloaded:"Copia de seguridad descargada correctamente",failedToCreateBackup:"Error al crear la copia de seguridad: {{message}}",restore:"Restaurar",restoreReplacesAll:"La restauración reemplaza todos los datos.",restoreReplacesAllDetail:"Su base de datos y archivos actuales se reemplazarán por completo. Se requiere un reinicio tras la restauración.",restoreConfirmTitle:"Restaurar copia de seguridad",restoreConfirmMessage:'¿Está seguro de que desea restaurar desde "{{filename}}"? Esto reemplazará por completo su base de datos actual y todos los archivos. La aplicación deberá reiniciarse tras la restauración.',restoreConfirmButton:"Restaurar copia de seguridad",uploadingFile:"Subiendo el archivo de copia de seguridad...",backupRestoredRestart:"Copia de seguridad restaurada. Reinicie Bambuddy.",failedToRestore:"Error al restaurar la copia de seguridad. Compruebe el formato del archivo.",reloadNow:"Recargar ahora",creatingBackup:"Creando copia de seguridad",restoringBackup:"Restaurando copia de seguridad",preparing:"Preparando...",processing:"Procesando...",doNotClosePage:"No cierre esta página ni navegue a otra. Esta operación puede tardar varios minutos para copias de seguridad grandes.",restoring:"Restaurando...",restoreComplete:"Restauración completada",restoreFailed2:"Error en la restauración",importSettings:"Importar ajustes desde un archivo de copia de seguridad",pleaseWaitRestoring:"Espere mientras se restauran sus datos",selectBackupFile:"Haga clic para seleccionar el archivo de copia de seguridad (.json o .zip)",duplicateHandling:"Cómo funciona la gestión de duplicados:",matchPrinters:"Impresoras",matchPrintersBy:"coincidencia por número de serie",matchSmartPlugs:"Enchufes inteligentes",matchSmartPlugsBy:"coincidencia por dirección IP",matchNotificationProviders:"Proveedores de notificaciones",matchNotificationProvidersBy:"coincidencia por nombre",matchFilaments:"Filamentos",matchFilamentsBy:"coincidencia por nombre + tipo + marca",matchArchives:"Archivos",matchArchivesBy:"coincidencia por hash del contenido (siempre se omiten)",matchPendingUploads:"Subidas pendientes",matchPendingUploadsBy:"coincidencia por nombre de archivo",matchSettingsTemplates:"Ajustes y plantillas",matchSettingsTemplatesBy:"siempre se sobrescriben",replaceExisting:"Reemplazar los datos existentes",keepExisting:"Conservar los datos existentes",overwriteDescription:"Sobrescribir los elementos que ya existen con los datos de la copia de seguridad",keepDescription:"Restaurar solo los elementos que aún no existen",overwriteCaution:"Precaución:",overwriteWarning:"Sobrescribir reemplazará sus configuraciones actuales con los datos de la copia de seguridad. Los códigos de acceso de las impresoras nunca se sobrescriben por seguridad.",cancel:"Cancelar",processingBackup:"Procesando el archivo de copia de seguridad...",itemsRestored:"Elementos restaurados",itemsSkipped:"Elementos omitidos",restored:"Restaurados",skippedAlreadyExist:"Omitidos (ya existen)",filesCategory:"Archivos (3MF, miniaturas, etc.)",andMore:"...y {{count}} más",newApiKeysGenerated:"Nuevas claves API generadas",keysShownOnce:"Estas claves solo se muestran una vez. ¡Cópielas ahora!",copy:"Copiar",noDataFound:"No se encontraron datos para restaurar en el archivo de copia de seguridad.",close:"Cerrar",scheduledBackup:"Copias de seguridad programadas",scheduledBackupDescription:"Cree automáticamente instantáneas de copia de seguridad según una programación. El directorio de salida se puede montar en un NAS o en almacenamiento externo.",frequency:"Frecuencia",backupTime:"Hora",retention:"Retención",retentionDescription:"Número de copias de seguridad que conservar",outputPath:"Ruta de salida",outputPathPlaceholder:"Predeterminada: {{path}}",outputPathDescription:"Déjelo vacío para la ubicación predeterminada",runNow:"Ejecutar ahora",backupFiles:"Archivos de copia de seguridad",noScheduledBackups:"Aún no hay copias de seguridad",deleteBackup:"Eliminar",deleteBackupConfirm:"¿Eliminar este archivo de copia de seguridad?",backupRunning:"Copia de seguridad en curso...",scheduledBackupComplete:"Copia de seguridad completada correctamente",scheduledBackupFailed:"Error en la copia de seguridad",nextBackup:"Próxima copia de seguridad",backupSize:"Tamaño",localTimeHint:"Hora local ({{tz}})",defaultPathLabel:"Predeterminada:",categories:{settings:"Ajustes",notification_providers:"Proveedores de notificaciones",notification_templates:"Plantillas de notificaciones",smart_plugs:"Enchufes inteligentes",printers:"Impresoras",filaments:"Filamentos",maintenance_types:"Tipos de mantenimiento",archives:"Archivos",projects:"Proyectos",pending_uploads:"Subidas pendientes",external_links:"Enlaces externos",api_keys:"Claves API"}},tags:{title:"Etiquetas",addTag:"Añadir etiqueta",editTag:"Editar etiqueta",deleteTag:"Eliminar etiqueta",tagName:"Nombre de la etiqueta",tagColor:"Color de la etiqueta",noTags:"No hay etiquetas",deleteConfirm:"¿Está seguro de que desea eliminar esta etiqueta?",manageTags:"Gestionar etiquetas"},uploadModal:{title:"Subir archivos 3MF",dragDrop:"Arrastre y suelte archivos .3mf aquí",or:"o",browseFiles:"Examinar archivos",extractionInfo:"El modelo de impresora se extraerá automáticamente de los metadatos del archivo 3MF.",uploaded:"subidos",failed:"fallidos",uploading:"Subiendo...",upload:"Subir",uploadFailed:"Error al subir"},editArchive:{title:"Editar archivo",name:"Nombre",namePlaceholder:"Nombre de la impresión",printer:"Impresora",noPrinter:"Sin impresora",project:"Proyecto",noProject:"Sin proyecto",itemsPrinted:"Elementos impresos",itemsPrintedHelp:"Número de elementos producidos en este trabajo de impresión",notes:"Notas",notesPlaceholder:"Añada notas sobre esta impresión...",externalLink:"Enlace externo",externalLinkPlaceholder:"https://printables.com/model/...",externalLinkHelp:"Enlace a Printables, Thingiverse u otra fuente",tags:"Etiquetas",tagsPlaceholder:"Añada etiquetas...",addMoreTags:"Añada más etiquetas...",matchingTags:'Coincidentes con "{{query}}"',existingTags:"Etiquetas existentes",clickToAdd:"(haga clic para añadir)",status:"Estado",failureReason:"Motivo del fallo",selectReason:"Seleccionar motivo...",photos:"Fotos del resultado impreso",photosHelp:"Haga clic en + para añadir fotos de su resultado impreso",printResult:"Resultado de la impresión",saving:"Guardando...",failureReasons:{adhesionFailure:"Fallo de adhesión",spaghettiDetached:"Espagueti / Desprendido",layerShift:"Desplazamiento de capa",cloggedNozzle:"Boquilla obstruida",filamentRunout:"Agotamiento del filamento",warping:"Alabeo",stringing:"Hilos",underExtrusion:"Subextrusión",powerFailure:"Corte de corriente",userCancelled:"Cancelada por el usuario",other:"Otro"},statuses:{completed:"Completada",failed:"Fallida",aborted:"Cancelada",printing:"Imprimiendo"}},kProfiles:{title:"Perfiles K",noPrintersConfigured:"No hay impresoras configuradas",addPrinterInSettings:"Añada una impresora en Ajustes para gestionar perfiles K",noActivePrinters:"No hay impresoras activas",enablePrinterConnection:"Active la conexión de una impresora para ver sus perfiles K",loadingProfiles:"Cargando perfiles K...",printerOffline:"Impresora desconectada",printerOfflineDesc:"La impresora seleccionada no está conectada. Enciéndala para ver los perfiles K.",noMatchingProfiles:"No hay perfiles coincidentes",noMatchingProfilesDesc:"Ningún perfil coincide con sus criterios de búsqueda",noKProfiles:"No hay perfiles K",noKProfilesDesc:"No se encontraron perfiles de avance de presión para la boquilla de {{diameter}} mm",createFirstProfile:"Crear el primer perfil",printer:"Impresora",nozzle:"Boquilla",refresh:"Actualizar",addProfile:"Añadir perfil",export:"Exportar",import:"Importar",select:"Seleccionar",selectAll:"Seleccionar todo",delete:"Eliminar",searchPlaceholder:"Buscar por nombre o filamento...",allExtruders:"Todos los extrusores",leftOnly:"Solo izquierdo",rightOnly:"Solo derecho",allFlow:"Todos los flujos",hfOnly:"Solo flujo alto",sOnly:"Solo estándar",sortName:"Ordenar: nombre",sortKValue:"Ordenar: valor K",sortFilament:"Ordenar: filamento",leftExtruder:"Extrusor izquierdo",rightExtruder:"Extrusor derecho",modal:{addTitle:"Añadir perfil K",editTitle:"Editar perfil K",profileName:"Nombre del perfil",profileNamePlaceholder:"Mi perfil de PLA",kValue:"Valor K",kValuePlaceholder:"0,020",kValueHelp:"Rango típico: 0,01 - 0,06 para PLA, 0,02 - 0,10 para PETG",filament:"Filamento",selectFilament:"Seleccionar filamento...",noFilamentsHelp:"No se encontraron filamentos. Cree primero un perfil K en Bambu Studio.",flowType:"Tipo de flujo",highFlow:"Flujo alto",standard:"Estándar",nozzleSize:"Tamaño de la boquilla",extruder:"Extrusor",extruders:"Extrusores",left:"Izquierdo",right:"Derecho",notes:"Notas (almacenadas localmente)",notesPlaceholder:"Añada notas sobre este perfil...",notesHelp:"Las notas se guardan en Bambuddy, no en la impresora",syncing:"Sincronizando con la impresora...",savingExtruder:"Guardando en el extrusor {{current}}/{{total}}...",pleaseWait:"Espere"},deleteConfirm:{title:"Eliminar perfil",cannotUndo:"Esto no se puede deshacer",message:'¿Está seguro de que desea eliminar "{{name}}" de la impresora?'},bulkDelete:{title:"Eliminar perfiles",cannotUndo:"Esto no se puede deshacer",message:"¿Está seguro de que desea eliminar {{count}} perfiles seleccionados de la impresora?"},toast:{profileSaved:"Perfil K guardado",profilesSaved:"Perfil K guardado en {{count}} extrusores",selectAtLeastOneExtruder:"Seleccione al menos un extrusor",profileDeleted:"Perfil K eliminado",profilesDeleted:"Se eliminaron {{count}} perfiles",exportedProfiles:"Se exportaron {{count}} perfiles",importedProfiles:"Se importaron {{count}} de {{total}} perfiles",noProfilesToExport:"No hay perfiles que exportar",invalidFileFormat:"Formato de archivo no válido",failedToParseImport:"Error al analizar el archivo de importación",failedToSaveBatch:"Error al guardar los perfiles K",noteSaved:"Nota guardada",failedToSaveNote:"Error al guardar la nota"},permission:{noRead:"No tiene permiso para actualizar perfiles",noCreate:"No tiene permiso para añadir perfiles",noUpdate:"No tiene permiso para actualizar perfiles K",noDelete:"No tiene permiso para eliminar perfiles K",noExport:"No tiene permiso para exportar perfiles",noImport:"No tiene permiso para importar perfiles"}},virtualPrinter:{title:"Impresora virtual",running:"En ejecución",stopped:"Detenida",description:{default:"Active una impresora virtual que aparece en Bambu Studio y OrcaSlicer. Los archivos enviados a esta impresora se archivarán directamente sin imprimir.",proxy:"Active un proxy que retransmite el tráfico del laminador a una impresora real, permitiendo la impresión remota a través de cualquier red."},enable:{title:"Activar la impresora virtual",visibleInSlicer:'Visible como "Bambuddy" en la detección del laminador',proxyingTo:"Haciendo de proxy hacia {{name}}",notActive:"No activa"},model:{title:"Modelo de impresora",description:"Seleccione qué modelo de impresora emular.",restartWarning:"Cambiar el modelo reiniciará la impresora virtual"},accessCode:{title:"Código de acceso",isSet:"El código de acceso está establecido",notSet:"No hay código de acceso establecido - necesario para activarla",placeholder:"Introduzca un código de 8 caracteres",placeholderChange:"Introduzca un nuevo código para cambiarlo",hint:"Debe tener exactamente 8 caracteres. Los laminadores lo usan para autenticarse.",charCount:"({{count}}/8)"},targetPrinter:{title:"Impresora de destino",configured:"Destino del proxy configurado",notConfigured:"No hay impresora de destino seleccionada - necesaria para el modo proxy",placeholder:"Seleccionar una impresora...",hint:"Seleccione la impresora a la que retransmitir el tráfico del laminador. La impresora debe estar en modo LAN.",noPrinters:"No hay impresoras configuradas. Añada primero una impresora para usar el modo proxy."},remoteInterface:{title:"Anulación de la interfaz de red",configured:"Anulación de la interfaz activa",optional:"Opcional - úsela si la IP detectada automáticamente es incorrecta (p. ej. varias tarjetas de red, Docker, VPN)",placeholder:"Detección automática (predeterminada)...",hint:"Anula la dirección IP anunciada mediante SSDP y usada en el certificado TLS. Útil cuando Bambuddy tiene varias interfaces de red."},mode:{title:"Modo",archive:"Archivar",archiveDesc:"Archivar los archivos inmediatamente",review:"Revisar",reviewDesc:"Revisar antes de archivar",queue:"Encolar",queueDesc:"Archivar y añadir a la cola",proxy:"Proxy",proxyDesc:"Retransmitir a una impresora real"},autoDispatch:{title:"Envío automático",description:"Iniciar automáticamente las impresiones al añadirlas a la cola. Cuando está desactivado, las impresiones esperan al envío manual."},queueForceColorMatch:{title:"Forzar la coincidencia de color",description:"Negarse a enviar a una impresora que no tiene cargados el tipo y el color exactos de filamento. Desactivado de forma predeterminada — sin esto, la cola usa la coincidencia solo por modelo y puede elegir una impresora con el color equivocado cargado."},tailscaleDisabled:{title:"Integración con Tailscale",description:"Actívelo para marcar esta IV como expuesta a través de Tailscale. Muestra la dirección de Tailscale del host para que sepa qué IP pegar en el laminador. El paso de importación de la CA no cambia — este interruptor no tiene ningún efecto sobre los certificados."},setupRequired:{title:"Configuración necesaria",description:"La función de impresora virtual requiere configuración adicional del sistema antes de funcionar. Esto incluye el reenvío de puertos, las reglas del cortafuegos y los ajustes específicos de la plataforma.",readGuide:"Lea la guía de configuración antes de activarla"},archiveNameSource:{title:"Origen del nombre del archivo",description:"Elija cómo se nombran los archivos nuevos cuando llegan a través de la impresora virtual. «Metadatos» usa el título incrustado por el laminador del 3MF (predeterminado). «Nombre de archivo» usa el nombre de archivo que Bambu Studio envió por FTP — útil si renombró el trabajo en el diálogo de «enviar a la impresora».",metadata:"Metadatos",filename:"Nombre de archivo"},caCert:{title:"Certificado del laminador",description:"Las impresoras virtuales usan un certificado TLS firmado por la CA de Bambuddy. Importe este certificado de CA en el almacén de confianza de su laminador una sola vez para que acepte la conexión — sin necesidad de copiarlo desde la línea de comandos.",copy:"Copiar",copied:"Copiado",download:"Descargar",fingerprint:"SHA-256"},howItWorks:{title:"Cómo funciona",step1:"En la misma LAN, las impresoras virtuales aparecen automáticamente en su laminador (Bambu Studio / OrcaSlicer) mediante detección. Desde otras redes, añádalas manualmente por dirección IP y código de acceso.",step2:"En los modos Archivar, Revisar y Encolar, use el botón «Enviar» de su laminador para subir archivos 3MF a Bambuddy. El laminador mostrará «Impresión correcta» — el archivo se almacena, no se imprime.",step3:"En el modo Proxy, la impresora virtual retransmite todo el tráfico a una impresora real — las impresiones comienzan inmediatamente como si estuviera conectada directamente."},status:{title:"Detalles del estado",printerName:"Nombre de la impresora",model:"Modelo",serialNumber:"Número de serie",mode:"Modo",pendingFiles:"Archivos pendientes",targetPrinter:"Impresora de destino",ftpPort:"Puerto FTP",mqttPort:"Puerto MQTT",ftpConnections:"Conexiones FTP",mqttConnections:"Conexiones MQTT"},toast:{updated:"Ajustes de la impresora virtual actualizados",failedToUpdate:"Error al actualizar los ajustes",copyFailed:"Error al copiar — pruebe a seleccionar el texto manualmente",accessCodeRequired:"Establezca primero un código de acceso",targetPrinterRequired:"Seleccione primero una impresora de destino",bindIpRequired:"Establezca primero una IP de enlace",accessCodeEmpty:"El código de acceso no puede estar vacío",accessCodeLength:"El código de acceso debe tener exactamente 8 caracteres",created:"Impresora virtual creada",failedToCreate:"Error al crear la impresora virtual",deleted:"Impresora virtual eliminada",failedToDelete:"Error al eliminar la impresora virtual"},list:{title:"Impresoras virtuales",add:"Añadir",addFirst:"Añadir impresora virtual",empty:"No hay impresoras virtuales configuradas. Añada una para empezar."},bindIp:{title:"Interfaz de enlace",placeholder:"Seleccionar interfaz...",hint:"Interfaz de red a la que se enlaza esta impresora virtual. Debe ser única por impresora."},proxy:{accessCodeHint:"En el modo proxy, use el código de acceso de su impresora de destino en el laminador. La conexión se reenvía de forma transparente a la impresora real."},addDialog:{title:"Añadir impresora virtual",name:"Nombre",hint:"Puede configurar el código de acceso, la impresora de destino y otros ajustes después de crearla.",create:"Crear"},deleteConfirm:{title:"Eliminar impresora virtual",message:'¿Está seguro de que desea eliminar "{{name}}"? Esto detendrá todos los servicios de esta impresora.'}},modelViewer:{openInSlicer:"Abrir en el laminador",tabs:{model:"Modelo 3D",gcode:"Vista previa de G-code"},notAvailable:"no disponible",notSliced:"no laminado",plates:"Camas",allPlates:"Todas las camas",plateNumber:"Cama {{number}}",plateCount:"{{count}} cama",plateCount_other:"{{count}} camas",objectCount:"{{count}} objeto",objectCount_other:"{{count}} objetos",filamentCount:"{{count}} filamento",filamentCount_other:"{{count}} filamentos",eta:"Tiempo estimado {{minutes}} min",noPreview:"No hay vista previa disponible para este archivo",pagination:{pageOf:"Página {{current}} de {{total}}",prev:"Anterior",next:"Siguiente"},errors:{failedToLoad:"Error al cargar el archivo",noMeshes:"No se encontraron mallas en el archivo 3MF",unsupportedFormat:"Formato de archivo no compatible"}},maintenanceDescriptions:{lubricateCarbonRods:"Aplique lubricante a las varillas de carbono para un movimiento suave",lubricateRails:"Aplique lubricante a las guías lineales para un movimiento suave",cleanNozzle:"Limpie el fusor y la boquilla para evitar obstrucciones",checkBelts:"Verifique la tensión de las correas para impresiones precisas",cleanBuildPlate:"Limpie la cama de impresión para una mejor adhesión",checkExtruder:"Inspeccione los engranajes del extrusor en busca de desgaste",checkCooling:"Asegúrese de que los ventiladores de refrigeración funcionan correctamente",generalInspection:"Inspección general de la impresora",cleanCarbonRods:"Limpie las varillas de carbono para reducir la fricción",lubricateSteelRods:"Aplique lubricante a las varillas de acero para un movimiento suave",cleanSteelRods:"Limpie las varillas de acero para reducir la fricción",cleanLinearRails:"Limpie las guías lineales para eliminar el polvo y los residuos",checkPtfeTube:"Inspeccione el tubo de PTFE en busca de desgaste o daños",replaceHepaFilter:"Reemplace el filtro HEPA para la calidad del aire",replaceCarbonFilter:"Reemplace el filtro de carbón activado",lubricateLeftNozzleRail:"Lubrique la guía de la boquilla izquierda (serie H2)"},smartPlugs:{offline:"Desconectado",admin:"Administración",openPlugAdminPage:"Abrir la página de administración del enchufe",deleteSmartPlug:"Eliminar enchufe inteligente",turnOnSmartPlug:"Encender el enchufe inteligente",turnOffSmartPlug:"Apagar el enchufe inteligente",turnOn:"Encender",turnOff:"Apagar",addSmartPlug:{scanningNetwork:"Escaneando la red...",chooseEntity:"Elija una entidad...",connectionFailed:"Error de conexión",searchEntities:"Buscar entidades...",searchPowerSensors:"Buscar sensores de potencia...",searchEnergySensors:"Buscar sensores de energía...",placeholders:{plugName:"Enchufe del salón",mqttStateOnValue:"ON, true, 1",mqttSameAsPower:"Igual que el tema de potencia, o distinto"}},linkedTo:"Vinculado a:",monitorOnly:"Solo supervisión",alerts:"Alertas",scheduleOn:"Encendido a las {{time}}",scheduleOff:"Apagado a las {{time}}",on:"Encendido",off:"Apagado",power:"Potencia",kwhToday:"kWh hoy",settings:"Ajustes",automationSettings:"Ajustes de automatización",showInSwitchbar:"Mostrar en la barra de interruptores",quickAccessSidebar:"Acceso rápido desde la barra lateral",enabled:"Activada",enableAutomation:"Activar la automatización para este enchufe",autoOn:"Encendido automático",autoOnDescription:"Encender cuando comienza la impresión",autoOff:"Apagado automático",autoOffDescription:"Apagar cuando se completa la impresión (una sola vez)",autoOffPersistent:"Mantener activado",autoOffPersistentDescription:"Permanecer activado entre impresiones en lugar de una sola vez",autoOffAfterDrying:"Apagado automático tras el secado",autoOffAfterDryingDescription:"Apagar cuando se completa el secado del AMS",delayAfterDryingMinutes:"Retardo de secado (minutos)",turnOffDelayMode:"Modo de retardo de apagado",time:"Tiempo",temp:"Temp.",delayMinutes:"Retardo (minutos)",tempThreshold:"Umbral de temperatura (°C)",tempThresholdDescription:"Se apaga cuando la boquilla se enfría por debajo de esta temperatura",edit:"Editar",deleteConfirm:'¿Está seguro de que desea eliminar "{{name}}"? Esto no se puede deshacer.',turnOnConfirm:'¿Está seguro de que desea encender "{{name}}"?',turnOffConfirm:'¿Está seguro de que desea apagar "{{name}}"? Esto cortará la corriente al dispositivo conectado.',failedToTurn:'Error al {{action}} "{{name}}"',unknown:"Desconocido",addTitle:"Añadir enchufe inteligente",editTitle:"Editar enchufe inteligente",stopScanning:"Detener escaneo",discoverTasmota:"Detectar dispositivos Tasmota",foundDevices:"Se encontraron {{count}} dispositivo(s) - haga clic para seleccionar:",noDevicesFound:"No se encontraron dispositivos Tasmota en su red",haNotConfigured:"Home Assistant no está configurado. Configúrelo en",haSettingsPath:"Ajustes → Red → Home Assistant",selectEntity:"Seleccionar entidad *",ipAddress:"Dirección IP *",nameLabel:"Nombre *",username:"Nombre de usuario",password:"Contraseña",authHint:"Déjelo vacío si su dispositivo Tasmota no requiere autenticación",linkToPrinter:"Vincular a una impresora",noPrinter:"Sin impresora (solo control manual)",linkingDescription:"La vinculación activa el encendido/apagado automático cuando las impresiones comienzan/terminan",powerAlerts:"Alertas de potencia",alertAbove:"Alertar si supera (W)",alertBelow:"Alertar si está por debajo (W)",alertDescription:"Reciba una notificación cuando el consumo de energía cruce estos umbrales. Déjelo vacío para desactivar esa dirección.",dailySchedule:"Programación diaria",turnOnAt:"Encender a las",turnOffAt:"Apagar a las",scheduleDescription:"Encender/apagar automáticamente el enchufe a estas horas cada día. Déjelo vacío para omitir esa acción.",showOnPrinterCard:"Mostrar en la tarjeta de la impresora",displayOnPrinterCard:"Mostrar el botón en la tarjeta de la impresora",connectedResult:"¡Conectado!",deviceLabel:"Dispositivo: {{name}} - ",stateLabel:"Estado: {{state}}",test:"Probar",delete:"Eliminar",save:"Guardar",add:"Añadir",cancel:"Cancelar",failedToStartScan:"Error al iniciar el escaneo",nameRequired:"El nombre es obligatorio",entityRequired:"La entidad es obligatoria para los enchufes de Home Assistant",mqttTopicRequired:"Debe configurarse al menos un tema MQTT para la supervisión de potencia, energía o estado",loadingEntities:"Cargando entidades...",loading:"Cargando...",failedToLoadEntities:"Error al cargar las entidades: {{error}}",noEntitiesMatching:'No se encontraron entidades que coincidan con "{{search}}"',noEntitiesAvailable:"No hay entidades disponibles",searchingEntities:"Buscando en todas las entidades ({{count}} encontradas)",showingEntities:"Mostrando switch, light, input_boolean ({{count}} disponibles)",energyMonitoringOptional:"Supervisión de energía (opcional)",energyMonitoringHint:"Busque y seleccione sensores que proporcionen datos de potencia/energía.",powerSensorW:"Sensor de potencia (W)",energyTodayKwh:"Energía de hoy (kWh)",totalEnergyKwh:"Energía total (kWh)",noMatchingSensors:"No hay sensores coincidentes",none:"Ninguno",mqttNotConfigured:"El broker MQTT no está configurado. Establezca la dirección del broker en",mqttSettingsPath:"Ajustes → Red → Publicación MQTT",mqttNotConfiguredSuffix:"(no necesita activar la publicación, solo rellenar los datos del broker).",mqttMonitorOnlyDescription:"Los enchufes MQTT reciben los datos de potencia/energía mediante una suscripción MQTT. El control de encendido/apagado no está disponible - use su broker MQTT o sistema de domótica.",powerMonitoring:"Supervisión de potencia",energyMonitoring:"Supervisión de energía",stateMonitoring:"Supervisión de estado",optional:"opcional",topic:"Tema",jsonPath:"Ruta JSON",multiplier:"Multiplicador",onValue:"Valor de ON",mqttPowerHint:`La ruta JSON extrae el valor de la carga útil JSON (p. ej., "power_l1"). Déjelo vacío si el tema publica valores numéricos sin procesar.
 Use el multiplicador 0,001 para mW→W, 1000 para kW→W.`,mqttEnergyHint:`La ruta JSON extrae el valor de la carga útil JSON. Déjelo vacío para valores sin procesar.
 Use el multiplicador 0,001 para Wh→kWh, 1000 para MWh→kWh.`,mqttStateHint:`La ruta JSON extrae el valor de la carga útil JSON. Déjelo vacío para valores sin procesar.
-Valor de ON: la cadena exacta que significa «ON». Déjelo vacío para la detección automática (ON, true, 1).`,restControl:"Control",restOnUrl:"URL de encendido",restOffUrl:"URL de apagado",restOnBody:"Cuerpo de la solicitud de encendido",restOffBody:"Cuerpo de la solicitud de apagado",restMethod:"Método HTTP",restHeaders:"Cabeceras personalizadas (JSON)",restStatusUrl:"URL de estado",restStatusPath:"Ruta JSON del estado",restStatusOnValue:"Valor de ON",restPowerUrl:"URL de potencia",restPowerPath:"Ruta JSON de la potencia",restPowerMultiplier:"Multiplicador de potencia",restEnergyUrl:"URL de energía",restEnergyPath:"Ruta JSON de la energía",restEnergyMultiplier:"Multiplicador de energía",restUrlRequired:"Se requiere al menos una URL (de encendido o apagado) para los enchufes REST",restHeadersHint:'p. ej. {"Authorization": "Bearer your-token"}',restBodyHint:'p. ej. ON, {"state": "on"}',restStatusHint:"URL para sondear el estado actual",restPathHint:"p. ej. state o data.power.status",restPowerUrlHint:"URL independiente para los datos de potencia (usa la URL de estado si está vacía)",restEnergyUrlHint:"URL independiente para los datos de energía (usa la URL de estado si está vacía)",restEnergyHint:"Cada valor puede usar su propia URL o recurrir a la URL de estado. Use multiplicadores para la conversión de unidades (p. ej. 0,001 para convertir Wh en kWh).",testConnection:"Probar conexión",connectionSuccess:"Conexión correcta",noSwitchesInSwitchbar:"No hay interruptores en la barra de interruptores",enableSwitchbarHint:"Active «Mostrar en la barra de interruptores» en Ajustes > Enchufes inteligentes"},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"Correo",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"Notificaciones por correo SMTP",telegram:"Notificaciones mediante un bot de Telegram",discord:"Enviar a un canal de Discord mediante un webhook",ntfy:"Notificaciones push gratuitas y autoalojables",pushover:"Notificaciones push sencillas y fiables",callmebot:"Notificaciones de WhatsApp gratuitas mediante CallMeBot",webhook:"POST HTTP genérico a cualquier URL",homeassistant:"Notificaciones persistentes en el panel de Home Assistant"},lastSuccess:"Última: {{date}}",error:"Error",printer:"Impresora:",allPrinters:"Todas las impresoras",sendTestNotification:"Enviar notificación de prueba",eventSettings:"Ajustes de eventos",enabled:"Activado",sendFromProvider:"Enviar notificaciones desde este proveedor",printEvents:"Eventos de impresión",printerStatus:"Estado de la impresora",amsAlarms:"Alarmas del AMS",amsHtAlarms:"Alarmas del AMS-HT",printQueue:"Cola de impresión",start:"Inicio",plateCheck:"Comprobación de cama",complete:"Completada",failed:"Fallida",stopped:"Detenida",progress:"Progreso",offline:"Desconectada",lowFilament:"Filamento bajo",maintenance:"Mantenimiento",amsHumidity:"Humedad del AMS",amsTemp:"Temp. del AMS",amsHtHumidity:"Humedad del AMS-HT",amsHtTemp:"Temp. del AMS-HT",bedCooled:"Cama enfriada",firstLayer:"Primera capa",quiet:"Silencio",digest:"Resumen {{time}}",printStarted:"Impresión iniciada",plateNotEmpty:"Cama no vacía",plateNotEmptyDescription:"Objetos detectados antes de la impresión",printCompleted:"Impresión completada",bedCooledLabel:"Cama enfriada",bedCooledDescription:"La cama se enfrió por debajo del umbral tras la impresión",firstLayerCompleteLabel:"Primera capa completada",firstLayerCompleteDescription:"Notificar con una captura cuando termina la primera capa",missingSpoolAssignmentLabel:"Falta la asignación de bobina",missingSpoolAssignmentDescription:"Notificar cuando la impresión comienza y las bandejas necesarias no tienen ninguna bobina asignada",printFailed:"Impresión fallida",printStopped:"Impresión detenida",progressMilestones:"Hitos de progreso",progressMilestonesDescription:"Notificar al 25%, 50% y 75%",printerOffline:"Impresora desconectada",printerError:"Error de la impresora",lowFilamentLabel:"Filamento bajo",maintenanceDue:"Mantenimiento pendiente",maintenanceDueDescription:"Notificar cuando se necesite mantenimiento",amsHumidityHigh:"Humedad alta del AMS",amsHumidityHighDescription:"La humedad del AMS normal supera el umbral",amsTemperatureHigh:"Temperatura alta del AMS",amsTemperatureHighDescription:"La temperatura del AMS normal supera el umbral",amsHtHumidityHigh:"Humedad alta del AMS-HT",amsHtHumidityHighDescription:"La humedad del AMS-HT supera el umbral",amsHtTemperatureHigh:"Temperatura alta del AMS-HT",amsHtTemperatureHighDescription:"La temperatura del AMS-HT supera el umbral",inventoryAlerts:"Alertas de inventario",stockReorderAlert:"Alerta de reabastecimiento",stockReorderAlertDescription:"El SKU ha alcanzado su punto de reabastecimiento",stockBreakAlert:"Alerta de rotura de existencias",stockBreakAlertDescription:"Las existencias se agotarán antes de que llegue el reabastecimiento",jobAdded:"Trabajo añadido",jobAddedDescription:"Trabajo añadido a la cola",jobAssigned:"Trabajo asignado",jobAssignedDescription:"Trabajo basado en el modelo asignado a una impresora",jobStarted:"Trabajo iniciado",jobStartedDescription:"El trabajo de la cola empezó a imprimirse",jobWaiting:"Trabajo en espera",jobWaitingDescription:"Trabajo a la espera de filamento o impresora",jobSkipped:"Trabajo omitido",jobSkippedDescription:"Trabajo omitido (el anterior falló)",jobFailed:"Trabajo fallido",jobFailedDescription:"El trabajo no pudo iniciarse",queueComplete:"Cola completada",queueCompleteDescription:"Todos los trabajos de la cola han terminado",quietHours:"Horas de silencio",noNotificationsDuring:"No hay notificaciones durante estas horas",editProviderToChangeQuietHours:"Edite el proveedor para cambiar las horas de silencio",dailyDigest:"Resumen diario",batchNotifications:"Agrupar las notificaciones en un único resumen diario",sendAt:"Enviar a las {{time}}",editProviderToChangeDigestTime:"Edite el proveedor para cambiar la hora del resumen",edit:"Editar",deleteProvider:"Eliminar proveedor de notificaciones",deleteConfirm:'¿Está seguro de que desea eliminar "{{name}}"? Esto no se puede deshacer.',delete:"Eliminar",addTitle:"Añadir proveedor de notificaciones",editTitle:"Editar proveedor de notificaciones",nameLabel:"Nombre *",namePlaceholder:"Mis notificaciones",providerTypeLabel:"Tipo de proveedor *",configuration:"Configuración",testConfiguration:"Probar configuración",printerFilter:"Filtro de impresora",onlyFromPrinter:"Enviar notificaciones solo para los eventos de esta impresora",quietHoursDnd:"Horas de silencio (no molestar)",quietStart:"Inicio",quietEnd:"Fin",dailyDigestLabel:"Resumen diario",sendDigestAt:"Enviar el resumen a las",digestCollected:"Los eventos se recopilarán y se enviarán como un único resumen a esta hora",notificationEvents:"Eventos de notificación",progressPercent:"(25%, 50%, 75%)",bedCooledAfterPrint:"(después de completar la impresión)",eventPriority:{sectionTitle:"Prioridad de ntfy",helpNtfy:"Elija una prioridad para cada evento activado. ntfy las usa para escalar las alertas (sonido, visibilidad, comportamiento de las notificaciones push). Los niveles no establecidos aquí usan el valor predeterminado del servidor ntfy.",min:"Mínima",low:"Baja",default:"Predeterminada",high:"Alta",urgent:"Urgente"},cancel:"Cancelar",save:"Guardar",add:"Añadir",nameRequired:"El nombre es obligatorio",fieldRequired:"{{field}} es obligatorio",phoneNumber:"Número de teléfono",apiKey:"Clave API",serverUrl:"URL del servidor",topic:"Tema",authToken:"Token de autenticación",userKey:"Clave de usuario",appToken:"Token de la aplicación",priority:"Prioridad",botToken:"Token del bot",chatId:"ID del chat",smtpServer:"Servidor SMTP",smtpPort:"Puerto SMTP",security:"Seguridad",authentication:"Autenticación",username:"Nombre de usuario",password:"Contraseña",fromEmail:"Correo del remitente",toEmail:"Correo del destinatario",webhookUrl:"URL del webhook",payloadFormat:"Formato de la carga útil",authorization:"Autorización",titleFieldName:"Nombre del campo del título",messageFieldName:"Nombre del campo del mensaje",editTemplate:"Editar plantilla: {{name}}",titleLabel:"Título",bodyLabel:"Cuerpo",titlePlaceholder:"Título de la notificación...",bodyPlaceholder:"Cuerpo de la notificación...",availableVariables:"Variables disponibles",clickToInsert:"Haga clic para insertar en la posición del cursor en el cuerpo",livePreview:"Vista previa en directo",hide:"Ocultar",show:"Mostrar",loadingPreview:"Cargando la vista previa...",enterTemplateContent:"Introduzca el contenido de la plantilla para ver la vista previa",titlePreview:"Título:",bodyPreview:"Cuerpo:",resetToDefault:"Restablecer al valor predeterminado",titleRequired:"El título es obligatorio",bodyRequired:"El cuerpo es obligatorio",notificationLog:"Registro de notificaciones",showFailedOnly:"Solo fallidas",last24Hours:"Últimas 24 horas",last7Days:"Últimos 7 días",last30Days:"Últimos 30 días",last90Days:"Últimos 90 días",justNow:"Ahora mismo",noFailedNotifications:"No hay notificaciones fallidas",noNotificationsLogged:"No hay notificaciones registradas",unknownProvider:"Proveedor desconocido",logTitle:"Título",logMessage:"Mensaje",logError:"Error",logProvider:"Proveedor: {{type}}",logTime:"Hora: {{time}}",refresh:"Actualizar",clearOld:"Borrar antiguas",statsSummary:"Últimos {{days}} días:",statsNotifications:"notificaciones",statsSent:"{{count}} enviadas",statsFailed:"{{count}} fallidas",eventTypes:{print_start:"Impresión iniciada",print_complete:"Impresión completada",print_failed:"Impresión fallida",print_stopped:"Impresión detenida",print_progress:"Progreso",printer_offline:"Impresora desconectada",printer_error:"Error de la impresora",filament_low:"Filamento bajo",maintenance_due:"Mantenimiento pendiente",test:"Prueba"},userEmail:{title:"Notificaciones",emailNotifications:"Notificaciones por correo",emailNotificationsDesc:"Reciba notificaciones por correo de sus propios trabajos de impresión. Los correos se envían usando los ajustes de SMTP del sistema configurados en la autenticación avanzada.",sendingTo:"Las notificaciones se enviarán a",noEmailWarning:"Su cuenta no tiene una dirección de correo. Póngase en contacto con un administrador para añadir una.",printJobNotifications:"Notificaciones de trabajos de impresión",printJobNotificationsDesc:"Elija qué eventos activan las notificaciones por correo para los trabajos de impresión que envíe.",printJobStarts:"El trabajo de impresión comienza",printJobStartsDesc:"Reciba una notificación cuando su trabajo de impresión comience.",printJobFinishes:"El trabajo de impresión termina",printJobFinishesDesc:"Reciba una notificación cuando su trabajo de impresión se complete correctamente.",printErrors:"Errores de impresión",printErrorsDesc:"Reciba una notificación cuando su trabajo de impresión falle o encuentre un error.",printJobStops:"El trabajo de impresión se detiene",printJobStopsDesc:"Reciba una notificación cuando su trabajo de impresión se cancele o se detenga.",saveSuccess:"Preferencias de notificación guardadas.",saveError:"Error al guardar las preferencias de notificación."}},richTextEditor:{bold:"Negrita",italic:"Cursiva",underline:"Subrayado",bulletList:"Lista con viñetas",numberedList:"Lista numerada",alignLeft:"Alinear a la izquierda",alignCenter:"Centrar",alignRight:"Alinear a la derecha",addLink:"Añadir enlace",removeLink:"Quitar enlace"},externalLinks:{noLinksConfigured:"No hay enlaces externos configurados",deleteLink:"Eliminar enlace",removeCustomIcon:"Quitar el icono personalizado",openInNewTab:"Abrir en una pestaña nueva",placeholders:{linkName:"Mi enlace"}},keyboardShortcuts:{title:"Atajos de teclado",navigation:"Navegación",archivesSection:"Archivos",kProfilesSection:"Perfiles K",generalSection:"General",shortcuts:{goToPrinters:"Ir a Impresoras",goToArchives:"Ir a Archivos",goToQueue:"Ir a la cola",goToStats:"Ir a Estadísticas",goToProfiles:"Ir a Perfiles en la nube",goToSettings:"Ir a Ajustes",focusSearch:"Enfocar la búsqueda",openUploadModal:"Abrir la ventana de subida",clearSelection:"Borrar la selección / quitar el foco del campo",contextMenu:"Menú contextual en las tarjetas",refreshProfiles:"Actualizar perfiles",newProfile:"Nuevo perfil",exitSelectionMode:"Salir del modo de selección",showHelp:"Mostrar esta ayuda"},footer:"Pulse Esc o haga clic fuera para cerrar"},notificationLog:{title:"Registro de notificaciones",events:{printStarted:"Impresión iniciada",printComplete:"Impresión completada",printFailed:"Impresión fallida",printStopped:"Impresión detenida",progress:"Progreso",printerOffline:"Impresora desconectada",printerError:"Error de la impresora",lowFilament:"Filamento bajo",maintenanceDue:"Mantenimiento pendiente",test:"Prueba"},timeAgo:{justNow:"Ahora mismo",minutesAgo:"hace {{minutes}} min",hoursAgo:"hace {{hours}} h"}},restoreBackup:{title:"Restaurar copia de seguridad",restoring:"Restaurando...",restoreComplete:"Restauración completada",restoreFailed:"Error en la restauración",importSettings:"Importar ajustes desde un archivo de copia de seguridad",pleaseWait:"Espere mientras se restauran sus datos",clickToSelect:"Haga clic para seleccionar el archivo de copia de seguridad (.json o .zip)",howDuplicateHandling:"Cómo funciona la gestión de duplicados:",categories:{printers:"Impresoras",smartPlugs:"Enchufes inteligentes",notificationProviders:"Proveedores de notificaciones",filaments:"Filamentos",archives:"Archivos",pendingUploads:"Subidas pendientes",settingsTemplates:"Ajustes y plantillas"},matchingInfo:{printers:"coincidencia por número de serie",smartPlugs:"coincidencia por dirección IP",notificationProviders:"coincidencia por nombre",filaments:"coincidencia por nombre + tipo + marca",archives:"coincidencia por hash del contenido",pendingUploads:"coincidencia por nombre de archivo",settingsTemplates:"siempre se sobrescriben"},replaceExisting:"Reemplazar los datos existentes",keepExisting:"Conservar los datos existentes",replaceDescription:"Sobrescribir los elementos que ya existen con los datos de la copia de seguridad",keepDescription:"Restaurar solo los elementos que aún no existen",caution:"Precaución:",cautionText:"Sobrescribir reemplazará sus configuraciones actuales con los datos de la copia de seguridad. Los códigos de acceso de las impresoras nunca se sobrescriben por seguridad.",itemsRestored:"Elementos restaurados",itemsSkipped:"Elementos omitidos",restored:"Restaurados",skipped:"Omitidos (ya existen)",filesLabel:"Archivos (3MF, miniaturas, etc.)",newApiKeysGenerated:"Nuevas claves API generadas",newApiKeysWarning:"Estas claves solo se muestran una vez. ¡Cópielas ahora!",processingBackup:"Procesando el archivo de copia de seguridad...",noDataFound:"No se encontraron datos para restaurar en el archivo de copia de seguridad.",failedToRestore:"Error al restaurar la copia de seguridad. Compruebe el formato del archivo."},backupExport:{title:"Exportar copia de seguridad",selectData:"Seleccione los datos que incluir",selectAll:"Seleccionar todo",selectNone:"No seleccionar nada",categoryDescriptions:{settings:"Idioma, tema, preferencias de actualización",notifications:"ntfy, Pushover, Discord, etc.",templates:"Plantillas de mensajes personalizadas",smartPlugs:"Configuraciones de enchufes Tasmota",externalLinks:"Enlaces de la barra lateral a servicios externos",printers:"Información de las impresoras (códigos de acceso excluidos)",plateDetection:"Imágenes de referencia de la cama vacía",filaments:"Tipos y costes de filamento",maintenance:"Programaciones de mantenimiento personalizadas",archives:"Todos los datos de impresión + archivos (3MF, miniaturas, fotos)",projects:"Proyectos, elementos de la lista de materiales y adjuntos",pendingUploads:"Subidas de la impresora virtual pendientes de revisión",apiKeys:"Claves API de webhook (se generan claves nuevas al importar)"},requiresPrinters:"Requiere que se seleccionen las impresoras",zipFileWarning:"Se creará un archivo ZIP.",zipFileDescription:"Incluye todos los archivos 3MF, las miniaturas, los time-lapses y las fotos. Esto puede tardar un rato y dar como resultado un archivo grande.",includeAccessCodes:"Incluir los códigos de acceso",includeAccessCodesDescription:"Para transferir a otra máquina",includeAccessCodesWarning:"Los códigos de acceso se incluirán en texto plano. ¡Mantenga este archivo de copia de seguridad seguro!",categoriesSelected:"{{selectedCount}} categorías seleccionadas"},pendingUploads:{placeholders:{notes:"Añada notas sobre esta impresión..."},discardUpload:"Descartar subida",archiveAllUploads:"Archivar todas las subidas",discardAllUploads:"Descartar todas las subidas",archive:"Archivar",timeAgo:{justNow:"Ahora mismo",minutesAgo:"hace {{minutes}} min",hoursAgo:"hace {{hours}} h",daysAgo:"hace {{days}} d"}},apiBrowser:{placeholders:{requestBody:"Cuerpo de la solicitud JSON...",searchEndpoints:"Buscar puntos de conexión..."}},configureAmsSlot:{title:"Configurar la ranura del AMS",slotConfigured:"¡Ranura configurada!",configuringSlot:"Configurando la ranura:",slotLabel:"{{ams}} Ranura {{slot}}",searchPresets:"Buscar preajustes...",colorPlaceholder:"Nombre del color o hexadecimal (p. ej., marrón, FF8800)",clearCustomColor:"Borrar el color personalizado",noCloudPresets:"No hay preajustes de la nube. Inicie sesión en Bambu Cloud para sincronizar.",noPresetsAvailable:"No hay preajustes disponibles. Inicie sesión en Bambu Cloud o importe perfiles locales.",noMatchingPresets:"No se encontraron preajustes coincidentes.",custom:"Personalizado",builtin:"Integrado",settingsSentToPrinter:"Ajustes enviados a la impresora",filamentProfile:"Perfil de filamento",kProfileLabel:"Perfil K (avance de presión)",filteringFor:"Filtrando por: {{material}}",noKProfile:"Sin perfil K (usar el predeterminado 0,020)",noMatchingKProfiles:"No se encontraron perfiles K coincidentes. Se usará el K=0,020 predeterminado.",selectFilamentFirst:"Seleccione primero un perfil de filamento",kFromCalibration:"K={{value}} de la calibración de la impresora",customColorLabel:"Color personalizado (opcional)",presetColors:"Colores de {{name}}:",showLessColors:"Mostrar menos colores",showMoreColors:"Mostrar más colores",clear:"Borrar",hexLabel:"Hex: #{{hex}}",resetting:"Restableciendo...",resetSlot:"Restablecer ranura",cancel:"Cancelar",configuring:"Configurando...",configureSlot:"Configurar ranura"},githubBackup:{title:"Copia de seguridad en Git",history:"Historial",downloadBackup:"Descargar copia de seguridad",restoreBackup:"Restaurar copia de seguridad",noBackupsYet:"Aún no hay copias de seguridad"},emailSettings:{placeholders:{fromName:"BamBuddy"}},tagManagement:{searchTags:"Buscar etiquetas...",renameTag:"Renombrar etiqueta",deleteTag:"Eliminar etiqueta"},notificationTemplates:{placeholders:{title:"Título de la notificación...",body:"Cuerpo de la notificación..."}},batchTag:{placeholders:{newTag:"Introduzca una nueva etiqueta..."}},photoGallery:{deletePhoto:"Eliminar foto"},filamentHoverCard:{copySpoolUuid:"Copiar el UUID de la bobina"},kProfilesView:{hasNote:"Tiene nota",copyProfile:"Copiar perfil"},layout:{openMenu:"Abrir menú",noPermissionSystemInfo:"No tiene permiso para ver la información del sistema"},dashboard:{dragToReorder:"Arrastre para reordenar",hideWidget:"Ocultar widget"},notificationProviderCard:{deleteNotificationProvider:"Eliminar proveedor de notificaciones"},fileManagerModal:{closeFileManager:"Cerrar el gestor de archivos",sortFiles:"Ordenar archivos",goToParentFolder:"Ir a la carpeta superior",threeView:"Vista 3D"},embeddedCameraViewer:{refreshStream:"Actualizar la transmisión",close:"Cerrar",zoomOut:"Alejar",resetZoom:"Restablecer el zoom",zoomIn:"Acercar",dragToResize:"Arrastre para redimensionar"},timelapseViewer:{skipBack5s:"Retroceder 5 s",skipForward5s:"Avanzar 5 s"},notificationProviders:{descriptions:{email:"Notificaciones por correo SMTP",telegram:"Notificaciones mediante un bot de Telegram",discord:"Enviar a un canal de Discord mediante un webhook",ntfy:"Notificaciones push gratuitas y autoalojables",pushover:"Notificaciones push sencillas y fiables",callmebot:"Notificaciones de WhatsApp gratuitas mediante CallMeBot",webhook:"POST HTTP genérico a cualquier URL"}},logViewer:{searchPlaceholder:"Buscar mensaje o nombre del registrador...",noLogEntries:"No se encontraron entradas de registro"},switchbarPopover:{noSwitchesInSwitchbar:"No hay interruptores en la barra de interruptores"},projectPageModal:{placeholders:{title:"Título",designer:"Diseñador",license:"Licencia",description:"Introduzca una descripción...",profileTitle:"Título del perfil",profileDescription:"Descripción del perfil..."}},spoolmanSettings:{},time:{unknown:"-",waiting:"En espera",justNow:"Ahora mismo",now:"Ahora",minsAgo:"hace {{count}} min",inMins:"en {{count}} min",hoursAgo:"hace {{count}} h",inHours:"en {{count}} h",daysAgo:"hace {{count}} d",inDays:"en {{count}} d"},spoolbuddy:{nav:{dashboard:"Panel",ams:"AMS",inventory:"Inventario",writeTag:"Escribir",settings:"Ajustes"},status:{nfcReady:"NFC listo",nfcOff:"NFC apagado",offline:"Desconectado",online:"En línea",noPrinters:"No hay impresoras",deviceOffline:"Dispositivo desconectado",waitingConnection:"Esperando la conexión del dispositivo...",systemReady:"Sistema listo",status:"Estado"},dashboard:{readyToScan:"Listo para escanear",idleMessage:"Coloque una bobina en la báscula para identificarla",nfcHint:"La etiqueta NFC se leerá automáticamente",device:"Dispositivo",syncWeight:"Sincronizar peso",weightSynced:"¡Sincronizado!",unknownTag:"Etiqueta desconocida",newTag:"Nueva etiqueta detectada",onScale:"en la báscula",linkSpool:"Vincular a bobina",linkTagTitle:"Vincular la etiqueta a una bobina",linkTag:"Vincular etiqueta",selectSpool:"Seleccione una bobina a la que vincular esta etiqueta:",noUntagged:"No se encontraron bobinas sin etiquetas",tagDetected:"Etiqueta detectada",noTag:"Sin etiqueta",tagId:"Etiqueta",grossWeight:"Peso bruto",spoolSize:"Tamaño de la bobina",close:"Cerrar",currentSpool:"Bobina actual",plateReady:"Cama lista: {{name}}",plateReadyLabel:"Camas listas para despejar",plateClearAction:"Despejar",plateClearedToast:"Cama marcada como despejada",plateClearFailed:"No se pudo marcar la cama como despejada"},modal:{spoolDetected:"Bobina detectada",assignToAms:"Asignar al AMS",syncWeight:"Sincronizar peso",weightSynced:"¡Sincronizado!",syncing:"Sincronizando...",newTagDetected:"Nueva etiqueta detectada",addToInventory:"Añadir al inventario",assignToAmsTitle:"Asignar al AMS",selectSlot:"Seleccione una ranura",assign:"Asignar",assigning:"Asignando...",assignSuccess:"¡Asignada!",assignPendingInsert:"Asignada. La ranura se configurará cuando inserte la bobina.",assignError:"Error al asignar la bobina. Inténtelo de nuevo.",noPrinterSelected:"Seleccionar una impresora...",noAmsDetected:"No se detectó ningún AMS en esta impresora",slot:"Ranura"},weight:{noReading:"Sin lectura",stable:"Estable",measuring:"Midiendo...",tare:"Tara",calibrate:"Calibrar"},spool:{remaining:"Restante",material:"Material",brand:"Marca",color:"Color",coreWeight:"Núcleo",labelWeight:"Etiqueta",scaleWeight:"Báscula",netWeight:"Neto",lastUsed:"Usada por última vez"},ams:{noData:"No se detectó ningún AMS",connectAms:"Conecte un AMS para ver las ranuras de filamento",noPrinter:"No hay impresora seleccionada",selectPrinter:"Seleccione una impresora en la barra superior",printerDisconnected:"Impresora desconectada",humidity:"Humedad",level:"Nivel",active:"Activa",slot:"Ranura",empty:"Vacía"},inventory:{search:"Buscar bobinas...",empty:"No hay bobinas en el inventario",noResults:"No hay bobinas coincidentes",spools:"bobinas",addSpool:"Añadir bobina"},settings:{tabDevice:"Dispositivo",tabDisplay:"Pantalla",tabScale:"Báscula",tabUpdates:"Actualizaciones",nfcReader:"Lector NFC",type:"Tipo",connection:"Conexión",notConnected:"N/D",deviceInfo:"Información del dispositivo",hostname:"Host",uptime:"Tiempo de actividad",systemConfig:"Backend y autenticación",backendUrl:"URL del backend de Bambuddy",apiToken:"Token de API",apiTokenPlaceholder:"Introduzca el token de API",saveConfig:"Guardar configuración",systemQueued:"Configuración encolada.",nfcDiagnostic:"Diagnóstico de NFC",scaleDiagnostic:"Diagnóstico de la báscula",readTagDiagnostic:"Diagnóstico de lectura de etiqueta",testNfc:"Probar el lector",testScale:"Probar la precisión",testReadTag:"Leer etiqueta",systemFieldsRequired:"La URL del backend es obligatoria.",brightness:"Brillo",saved:"Guardado",noBacklight:"No se detectó retroiluminación DSI. El control del brillo requiere una pantalla DSI.",screenBlank:"Tiempo de espera para apagar la pantalla",screenBlankDesc:"La pantalla se apaga tras la inactividad. Toque para activarla.",displayNote:"El brillo se aplica como un filtro de software.",scaleCalibration:"Calibración de la báscula",currentWeight:"Peso actual",tareOffset:"Tara",calFactor:"Factor",knownWeight:"Peso conocido",calStep1:"Retire todos los elementos de la báscula y pulse Poner a cero.",calStep2:"Coloque el peso conocido en la báscula.",setZero:"Poner a cero",calibrateNow:"Calibrar",calibrated:"Calibrada",tareSet:"Comando de tara enviado. Esperando al dispositivo...",tareComplete:"¡Tara completada!",tareTimedOut:"Tara agotó el tiempo de espera — ¿está activo el daemon de SpoolBuddy?",tareFailed:"Error al enviar el comando de tara",zeroSet:"Punto cero establecido. Coloque el peso conocido en la báscula.",calibrationDone:"¡Calibración completada!",calibrationFailed:"Error en la calibración",lastCalibrated:"Calibrada por última vez",stable:"Estable",settling:"Estabilizando...",firmware:"Firmware",scale:"Báscula",noDevice:"No se encontró ningún dispositivo SpoolBuddy",daemonVersion:"Versión del demonio",currentVersion:"Actual",versionPending:"Esperando al demonio...",checking:"Comprobando...",checkUpdates:"Buscar actualizaciones",updateAvailable:"Actualización disponible",updateInstructions:"Actualice mediante SSH: ejecute el script de instalación de SpoolBuddy para actualizar.",upToDate:"Actualizado",includeBeta:"Incluir versiones beta"},writeTag:{tabExisting:"Bobina existente",tabNew:"Bobina nueva",tabReplace:"Reemplazar etiqueta",searchPlaceholder:"Buscar por material, color, marca...",noUntaggedSpools:"No hay bobinas sin etiquetas",noTaggedSpools:"No hay bobinas con etiquetas",selectSpool:"Seleccione una bobina y luego coloque una etiqueta NTAG en blanco en el lector",placeTag:"Coloque una etiqueta NTAG en el lector",tagReady:"Etiqueta detectada — lista para escribir",writeTag:"Escribir etiqueta",replaceTag:"Reemplazar etiqueta",writing:"Escribiendo la etiqueta...",waiting:"Esperando a SpoolBuddy...",writeSuccess:"¡Etiqueta escrita correctamente!",writeFailed:"Error al escribir",queueFailed:"Error al encolar el comando de escritura",tryAgain:"Inténtelo de nuevo",cancel:"Cancelar",replaceWarning:"La etiqueta antigua se desvinculará. La nueva etiqueta la reemplazará.",deviceOffline:"SpoolBuddy está desconectado",material:"Material",colorName:"Nombre del color",color:"Color",brand:"Marca",weight:"Peso (g)",createSpool:"Crear bobina",creating:"Creando...",spoolCreated:"¡Bobina creada! Lista para escribir.",createFailed:"Error al crear la bobina",incompleteDataWarning:"Etiqueta escrita con datos de Spoolman incompletos"},quickMenu:{printerPower:"Alimentación de la impresora",systemControls:"Sistema",restartDaemon:"Reiniciar demonio",restartBrowser:"Reiniciar navegador",reboot:"Reiniciar",shutdown:"Apagar",swipeToClose:"Deslice hacia abajo para cerrar",confirmTitle:"Confirmar",confirmShutdown:"¿Está seguro de que desea apagar el SpoolBuddy? Necesitará acceso físico para volver a encenderlo.",confirmReboot:"¿Está seguro de que desea reiniciar el SpoolBuddy?",confirmRestartDaemon:"¿Reiniciar el demonio de SpoolBuddy? El NFC y la báscula no estarán disponibles temporalmente.",confirmRestartBrowser:"¿Reiniciar el navegador del quiosco? La pantalla se quedará en negro brevemente.",confirm:"Confirmar",confirmPlugOn:"¿Encender {{name}}?",confirmPlugOff:"¿Apagar {{name}}?",turnOn:"Encender",turnOff:"Apagar"}},diagnostic:{modalTitle:"Diagnóstico de conexión — {{name}}",running:"Ejecutando el diagnóstico...",runningElapsed:"Ejecutando el diagnóstico... ({{elapsed}}s)",waitingForReportHint:"Esperando a que la impresora publique un informe de estado — puede tardar hasta {{max}} segundos.",runFailed:"No se pudo ejecutar el diagnóstico: {{error}}",retry:"Ejecutar de nuevo",runButton:"Ejecutar diagnóstico",sectionTitle:"Diagnóstico de conexión",sectionDescription:"Compruebe por qué una impresora no se conecta o no imprime — accesibilidad de los puertos, modo desarrollador LAN, modo de red de Docker y credenciales.",noPrinters:"No hay impresoras configuradas.",overall:{ok:"No se encontraron problemas — la conexión de la impresora parece correcta.",warnings:"La impresora debería funcionar, pero algunas cosas necesitan atención.",problems:"Se encontraron problemas que explican por qué la impresora no se conecta o no imprime."},check:{port_mqtt:{title:"Puerto de control (MQTT 8883)",pass:"Accesible — la impresora acepta conexiones de control.",fail:"El puerto 8883 no es accesible. La impresora está apagada, en una dirección IP distinta, o un cortafuegos lo está bloqueando. Verifique la IP de la impresora y que nada bloquee el puerto 8883."},port_ftps:{title:"Puerto de transferencia de archivos (FTPS 990)",pass:"Accesible — el envío de archivos de impresión funcionará.",warn:"El puerto 990 no es accesible. La supervisión puede seguir funcionando, pero el envío de impresiones a la impresora fallará. Asegúrese de que el puerto 990 no esté bloqueado."},port_rtsps:{title:"Puerto de la cámara (RTSPS 322)",pass:"Accesible — la transmisión de la cámara funcionará.",warn:"El puerto 322 no es accesible. La vista de la cámara en directo no funcionará. Esto no afecta a la impresión."},network_mode:{title:"Modo de red de Docker",pass:"Ejecutándose en modo de red de host.",warn:'Bambuddy se está ejecutando en red de tipo bridge de Docker. La detección de impresoras y la impresora virtual necesitan el modo de red de host — vuelva a crear el contenedor con "network_mode: host".',skip:"No se está ejecutando en Docker — no aplicable."},subnet:{title:"Subred de la red",pass:"La impresora y Bambuddy están en la misma subred.",warn:"La impresora ({{printer_ip}}) y Bambuddy ({{host_ip}}) están en subredes distintas. Es posible que no se alcancen entre sí a menos que se configure el enrutamiento entre las subredes.",skip:"No se pudo determinar la subred — omitido."},mqtt_auth:{title:"Credenciales de la impresora",pass:"La impresora aceptó la conexión.",fail:"La impresora es accesible pero rechazó la conexión. Lo más probable es que el código de acceso o el número de serie sean incorrectos. El código de acceso cambia cada vez que se conmuta el modo desarrollador — vuelva a copiarlo de la pantalla de la impresora.",skip:"No comprobado — no se pudo alcanzar la impresora."},developer_mode:{title:"Modo desarrollador LAN",pass:"El modo desarrollador está activado.",fail:"El modo desarrollador está DESACTIVADO en la impresora. Actívelo en los ajustes de LAN de la impresora — y confirme con Aceptar. Sin él, las impresiones no comenzarán.",skip:"No se pudo comprobar — requiere una conexión activa con la impresora."},printer_publishing:{title:"La impresora publica estado",pass:"La impresora está publicando actualizaciones de estado — AMS, filamentos y perfiles K se reflejarán correctamente en el slicer.",fail:"El broker MQTT aceptó la conexión, pero la impresora no ha publicado ningún informe de estado. Casi siempre se trata de un número de serie incorrecto o con mayúsculas/minúsculas mal escritas — el topic device/<serial>/report distingue entre mayúsculas y minúsculas. Revise el número de serie en los ajustes de la impresora comparándolo con la pantalla del aparato.",skip:"No se pudo comprobar — requiere una conexión activa con la impresora."}}},systemHealth:{sectionTitle:"Estado del sistema",sectionDescription:"Analiza los registros recientes en busca de problemas conocidos que normalmente puedes resolver tú mismo, antes de que se conviertan en un ticket de soporte.",rescan:"Volver a analizar",clean:"No se encontraron problemas conocidos en las últimas {{times}} entradas de registro.",logUnavailable:"El registro en archivo está desactivado, por lo que no se pueden analizar los registros. Activa el registro en archivo para usar esta comprobación.",learnMore:"Cómo solucionarlo",fixLabel:"Solución:",occurrences:"Visto {{times}}× — última vez a las {{lastSeen}}",category:{layer8:"Puedes solucionarlo",environment:"Entorno",bug:"Por favor, repórtalo"},signature:{"ftp-auth-rejected":{name:"La impresora rechazó el código de acceso",cause:"La impresora rechazó el inicio de sesión de transferencia de archivos. El código de acceso es incorrecto o cambió tras activar el Modo Desarrollador.",fix:"Vuelve a copiar el código de acceso desde la pantalla de la impresora (ajustes de LAN) y actualízalo en los ajustes de la impresora en Bambuddy."},"ftp-connection-timeout":{name:"Se agotó el tiempo de la conexión de transferencia de archivos",cause:"Bambuddy no pudo alcanzar el puerto de transferencia de archivos de la impresora (FTPS 990). El puerto está bloqueado, o la impresora está apagada o en otra subred.",fix:"Asegúrate de que nada bloquee el puerto 990 entre Bambuddy y la impresora, y de que ambos estén en la misma red."},"ftp-ssl-error":{name:"Falló el protocolo de enlace seguro de transferencia de archivos",cause:"El protocolo de enlace TLS con el servidor de transferencia de archivos de la impresora falló. Suele deberse a un cortafuegos o a un firmware de impresora desactualizado.",fix:"Actualiza el firmware de la impresora y comprueba que ningún cortafuegos o proxy intercepte la conexión en el puerto 990."},"mqtt-connection-flapping":{name:"La conexión con la impresora se cae continuamente",cause:"La conexión de control (MQTT 8883) se desconecta y reconecta repetidamente, normalmente por una red débil o un puerto parcialmente bloqueado.",fix:"Comprueba la señal Wi-Fi en la impresora, usa preferentemente una conexión por cable y asegúrate de que el puerto 8883 sea accesible de forma fiable."},"camera-connection-refused":{name:"Transmisión de cámara inaccesible",cause:"No se pudo acceder a la cámara en vivo en el puerto RTSPS 322. El puerto está bloqueado, o la cámara o la vista en vivo por LAN están desactivadas en la impresora.",fix:"Activa la cámara y la vista en vivo por LAN en la impresora y asegúrate de que el puerto 322 no esté bloqueado. Esto no afecta a la impresión."},"database-locked":{name:"Conflictos de escritura en la base de datos",cause:'La base de datos SQLite presenta errores "database is locked" bajo carga, algo habitual al usar varias impresoras a la vez.',fix:"Cambia Bambuddy a una base de datos PostgreSQL externa. Consulta la guía de PostgreSQL en la documentación."}}},vpDiagnostic:{title:"Comprobación de configuración — {{name}}",runButton:"Ejecutar comprobación de configuración",running:"Ejecutando comprobación de configuración...",runFailed:"No se pudo ejecutar la comprobación de configuración: {{error}}",retry:"Volver a comprobar",overall:{ok:"Todas las comprobaciones se superaron — esta impresora virtual está configurada correctamente.",warnings:"La impresora virtual debería funcionar, pero algunas cosas requieren atención.",problems:"Se encontraron problemas que explican por qué el laminador no puede ver ni usar esta impresora virtual."},check:{enabled:{title:"Impresora virtual habilitada",fail:"Esta impresora virtual está apagada. Actívela para que sea detectable."},running:{title:"Servicios en ejecución",fail:"La impresora virtual está habilitada pero sus servicios no se están ejecutando. Revise el registro de Bambuddy — normalmente los detiene un conflicto de IP de enlace o un error de permisos."},bind_interface:{title:"Interfaz de red de enlace",fail:'La interfaz de enlace no está configurada o ya no existe en este host. Elija una interfaz actual en el menú "Interfaz de enlace".'},access_code:{title:"Código de acceso configurado",fail:"No hay ningún código de acceso configurado. Al laminador se le debe dar el mismo código de acceso de 8 caracteres que configura aquí."},target_printer:{title:"Impresora de destino",fail:"No hay ninguna impresora de destino seleccionada. El modo proxy necesita una impresora real a la que reenviar.",warn:"La impresora de destino está desconectada ahora mismo — el reenvío se reanudará cuando vuelva a conectarse."},port_ftps:{title:"Servicio de subida de archivos (puerto {{port}})",fail:"No hay nada escuchando en el puerto {{port}} de la IP de enlace, por lo que el laminador no puede subir archivos. La causa habitual es un conflicto de puerto en esta interfaz."},port_mqtt:{title:"Servicio de control (puerto {{port}})",fail:"No hay nada escuchando en el puerto {{port}} de la IP de enlace, por lo que el laminador no puede conectarse ni mostrar el estado."},port_bind:{title:"Servicio de detección (puerto {{port}})",fail:"No hay nada escuchando en el puerto {{port}} de la IP de enlace, por lo que falla el protocolo de detección del laminador."},certificate:{title:"Certificado TLS",pass:"Certificado listo. Asegúrese de que el certificado de CA de Bambuddy (arriba) esté importado en el almacén de confianza de su laminador.",fail:"Falta el certificado TLS de esta impresora virtual. Compruebe que el directorio de datos de Bambuddy tenga permisos de escritura."}}},bugReport:{logHealthSummary:"Se encontraron problemas conocidos en tus registros",logHealthIntro:"Los registros recientes coinciden con problemas conocidos. Revisa las soluciones de abajo: resolverlas podría arreglar tu problema sin un informe de error. Aun así, puedes enviar un informe abajo.",title:"Informar de un error",description:"Descripción",descriptionPlaceholder:"¿Qué salió mal? Describa el problema...",email:"Correo (opcional)",emailPlaceholder:"su@correo.com",emailPrivacy:"Si lo proporciona, su correo se incluirá en una sección plegada de la incidencia de GitHub para que el mantenedor pueda hacer un seguimiento.",screenshot:"Captura de pantalla",uploadOrPaste:"Suba, pegue o arrastre una imagen",dataCollectedSummary:"¿Qué datos se incluyen en el informe?",dataIncluded:"Incluidos:",dataIncludedList:"Versión de la aplicación, sistema operativo, arquitectura, versión de Python, estadísticas de la base de datos (solo recuentos), modelos de impresora, número de boquillas, versiones de firmware, estado de la conectividad, estado de las integraciones (Spoolman, MQTT, HA), ajustes no sensibles, número de interfaces de red, detalles de Docker, versiones de las dependencias.",dataNeverIncluded:"Nunca incluidos:",dataNeverIncludedList:"Nombres de impresora, números de serie, códigos de acceso, contraseñas, direcciones IP, direcciones de correo, claves API, tokens, URL de webhook, nombres de host o nombres de usuario.",submit:"Enviar",startLogging:"Iniciar el registro de depuración",stepEnableLogging:"Registro de depuración activado",stepReproduce:"Reproduzca el problema ahora",stepStopLogging:"Detener y enviar el informe",stopAndSubmit:"Detener y enviar",maxDuration:"Se detiene automáticamente tras {{minutes}} min",stoppingLogs:"Recopilando registros y enviando...",submitting:"Enviando el informe de error...",submittingStepConnection:"Ejecutando comprobaciones de conectividad de impresoras",submittingStepVirtualPrinters:"Ejecutando comprobaciones de configuración de impresoras virtuales",submittingStepLogScan:"Analizando los registros recientes en busca de problemas conocidos",submittingStepSubmit:"Enviando el informe a GitHub",submitSuccess:"¡Informe de error enviado correctamente!",submitFailed:"Error al enviar el informe de error",diagnosticChecking:"Comprobando las conexiones de las impresoras...",diagnosticHealthy:"La comprobación de conexión se superó — no se encontraron problemas en sus impresoras.",diagnosticSummary:"{{problems}} de {{total}} impresoras tienen problemas de conexión",diagnosticIntro:"Una o más impresoras tienen un problema de conexión que puede estar causando su problema. Despliegue una impresora a continuación para ver la solución — resolverla podría solucionar el problema sin un informe de error. Aún puede enviar un informe a continuación.",thankYou:"¡Gracias!",submitted:"Su informe de error se ha enviado.",viewIssue:"Ver incidencia",unexpectedError:"Se produjo un error inesperado"},failureDetection:{title:"Detección de fallos por IA",description:"Supervise las impresiones con una API de ML de Obico autoalojada y actúe automáticamente ante los fallos detectados.",mlUrl:"URL de la API de ML de Obico",mlUrlHint:"URL base de su contenedor ml_api de Obico autoalojado (p. ej. http://192.168.1.10:3333).",test:"Probar",testSuccess:"API de ML accesible y correcta.",testFailed:"No se pudo alcanzar la API de ML.",sensitivity:"Sensibilidad",sensitivityLow:"Baja (menos falsos positivos)",sensitivityMedium:"Media (equilibrada)",sensitivityHigh:"Alta (detección temprana, más falsos positivos)",sensitivityHint:"Ajusta los umbrales de confianza que activan las advertencias y los fallos.",action:"Acción ante un fallo detectado",actionNotify:"Solo notificar",actionPause:"Pausar la impresión",actionPauseOff:"Pausar y cortar la corriente",pollInterval:"Intervalo de sondeo (segundos)",pollIntervalHint:"Con qué frecuencia comprobar cada impresora mientras imprime. Mínimo 5 s, máximo 120 s.",externalUrlMissing:"La URL externa no está establecida.",externalUrlHint:"La API de ML obtiene la captura de la cámara por URL. Establezca la URL externa en los ajustes generales para que el contenedor de la API de ML pueda alcanzar Bambuddy.",perPrinterTitle:"Impresoras supervisadas",perPrinterHint:"Elija qué impresoras vigila el servicio de detección.",monitorAll:"Supervisar todas las impresoras conectadas",statusTitle:"Estado",serviceRunning:"Servicio en ejecución",thresholds:"Umbrales bajo / alto",activePrinters:"Impresiones activas",noActivePrints:"No hay impresiones en curso actualmente.",historyTitle:"Detecciones recientes",noHistory:"Aún no hay detecciones."},makerworld:{title:"MakerWorld",description:"Pegue la URL de un modelo de MakerWorld para importarlo e imprimirlo directamente desde Bambuddy — sin tener que salir a la aplicación Bambu Handy.",pasteUrlHeader:"Importar desde MakerWorld",pasteUrlPlaceholder:"https://makerworld.com/en/models/… o pegue cualquier enlace de MakerWorld",resolveButton:"Resolver",signInRequiredTitle:"Se requiere iniciar sesión en Bambu Cloud para descargar",signInRequiredBody:"Puede explorar los detalles del modelo de forma anónima, pero MakerWorld requiere una cuenta de Bambu Cloud para descargar archivos 3MF.",openCloudSettings:"Abrir los ajustes de la nube",untitledModel:"Modelo sin título",byCreator:"de {{name}}",downloadsCount:"{{count}} descargas",licensePrefix:"Licencia",alreadyImported:"Ya está en la biblioteca",openOnMakerworld:"Abrir en MakerWorld",alreadyInLibrary:"Este modelo ya está en su biblioteca — encuéntrelo en Gestor de archivos → MakerWorld",importSuccess:"{{filename}} importado — guardado en Gestor de archivos → MakerWorld",platesHeader:"Camas ({{count}})",plateDefaultName:"Cama {{n}}",materialCount:"{{count}} filamentos",amsRequired:"AMS necesario",slicedFor:"Laminado para {{printer}}",alsoCompatible:"También marcado como compatible: {{printers}}",importToLibrary:"Guardar",sliceIn:"Guardar y laminar en {{slicer}}",disclaimer:"La integración con MakerWorld usa puntos de conexión de API documentados por la comunidad. Bambuddy no está afiliado a MakerWorld ni a Bambu Lab ni cuenta con su respaldo.",lastImportSuccess:"Importado a su biblioteca",lastImportAlreadyInLibrary:"Ya está en su biblioteca",viewInLibrary:"Ver en el gestor de archivos",openInBambuStudio:"Abrir en Bambu Studio",openInOrcaSlicer:"Abrir en OrcaSlicer",importTo:"Importar al gestor de archivos",recentImportsHeader:"Importaciones recientes",phaseResolving:"Resolviendo",phaseDownloading:"Descargando",folderAuto:"MakerWorld (predeterminada)",importAll:"Importar todo",importAllProgress:"Importando {{current}}/{{total}}",openGallery:"Abrir la galería de imágenes",galleryPrev:"Imagen anterior",galleryNext:"Imagen siguiente",deleteImport:"Quitar de la biblioteca",importDeleting:"Quitando…",importDeleted:"Quitado de la biblioteca",confirmDelete:"¿Quitar {{filename}} de la biblioteca? Esto elimina el archivo local, pero la cama se puede volver a importar desde MakerWorld.",errors:{resolveFailed:"No se pudo resolver esa URL de MakerWorld.",downloadFailed:"Error en la descarga. Inténtelo de nuevo.",deleteFailed:"No se pudo quitar el archivo de la biblioteca."}},gcodeViewer:{back:"Atrás",backToArchives:"Volver a los archivos de impresión",backToFiles:"Volver al gestor de archivos"},libraryTrash:{title:"Papelera",headerButton:"Papelera",headerTooltip:"Ver los archivos movidos a la papelera",backToFiles:"Volver al gestor de archivos",subtitleAdmin:"Los archivos eliminados permanecen aquí durante {{days}} días y luego se eliminan automáticamente. Esta vista muestra los archivos en la papelera de todos los usuarios.",subtitleUser:"Los archivos eliminados permanecen aquí durante {{days}} días y luego se eliminan automáticamente.",loading:"Cargando la papelera…",loadError:"No se pudo cargar la papelera.",empty:"La papelera está vacía.",summary:"{{count}} archivos · {{size}}",emptyTrash:"Vaciar la papelera",restore:"Restaurar",purgeNow:"Eliminar ahora",autoPurgeIn:"Se elimina automáticamente en {{when}}",days:"días",retentionLabel:"Eliminar automáticamente tras",selectAll:"Seleccionar todo",selectOne:"Seleccionar {{filename}}",selectionCount:"{{count}} seleccionados",bulkRestore:"Restaurar los seleccionados",bulkPurge:"Eliminar los seleccionados",col:{filename:"Archivo",folder:"Carpeta",size:"Tamaño",deleted:"Movido a la papelera",autoPurge:"Se elimina automáticamente",owner:"Propietario",actions:"Acciones"},confirm:{purgeTitle:"¿Eliminar permanentemente?",purgeBody:"{{filename}} se eliminará del disco y no se podrá restaurar.",emptyTitle:"¿Vaciar la papelera?",emptyBody:"Los {{count}} archivos se eliminarán del disco. Esto no se puede deshacer.",bulkPurgeTitle:"¿Eliminar permanentemente los archivos seleccionados?",bulkPurgeBody:"Los {{count}} archivos seleccionados se eliminarán del disco y no se podrán restaurar.",cta:"Eliminar permanentemente"},toast:{restored:"Archivo restaurado.",restoreFailed:"No se pudo restaurar el archivo.",purged:"Archivo eliminado permanentemente.",purgeFailed:"No se pudo eliminar el archivo.",emptied:"Se eliminaron {{count}} archivo(s) de la papelera.",emptyFailed:"No se pudo vaciar la papelera.",retentionSaved:"Eliminación automática establecida en {{days}} días.",retentionFailed:"No se pudo guardar el ajuste de retención.",bulkRestored:"Se restauraron {{count}} archivo(s).",bulkPurged:"Se eliminaron {{count}} archivo(s)."}},libraryPurge:{title:"Purgar archivos antiguos",headerButton:"Purgar antiguos",headerTooltip:"Mover en bloque los archivos antiguos a la papelera",description:"Limpie de un solo paso los archivos antiguos de su biblioteca. Los archivos con un historial de impresión envejecen según su fecha de última impresión; los archivos que nunca se imprimieron envejecen según su fecha de subida.",ageLabel:"Mover los archivos de más de",days:"días",includeNeverPrinted:"Incluir los archivos que nunca se han impreso",effectsTitle:"Qué ocurre cuando hace clic en Purgar",effect1:"Los archivos coincidentes se mueven a la papelera — aún no se eliminan del disco.",effect2:"Puede restaurarlos de la papelera en cualquier momento hasta que expire el periodo de retención.",effect3:"Tras la retención, el barrido de la papelera los elimina permanentemente del disco.",effect4:"Los archivos de carpetas externas (vinculadas) se omiten — Bambuddy nunca elimina bytes que no le pertenecen.",previewLoading:"Comprobando cuántos archivos coinciden…",previewFailed:"No se pudo previsualizar la purga.",previewSummary:"{{count}} archivos · {{size}} se moverían a la papelera",andMore:"…y {{count}} más",warning:"Los archivos en la papelera siguen contando para el almacenamiento hasta que expire el periodo de retención. Vacíe la papelera después para liberar el disco de inmediato.",confirmCta:"Mover {{count}} a la papelera",purging:"Moviendo a la papelera…",toast:{success:"Se movieron {{count}} archivo(s) a la papelera.",failed:"No se pudieron purgar los archivos."}},libraryAutoPurge:{enableLabel:"Purgar automáticamente los archivos antiguos",enableDescription:"Ejecuta la purga de administración una vez al día. Los archivos van primero a la papelera — no se eliminan de inmediato.",ageLabel:"Purgar automáticamente los archivos de más de",ageDescription:"Mínimo 7 días, máximo 10 años. Usa la misma regla de antigüedad que el botón de purga manual.",days:"días",includeNeverPrinted:"Incluir los archivos que nunca se han impreso",saveFailed:"No se pudieron guardar los ajustes de purga automática."},archivePurge:{headerButton:"Purgar antiguos",headerTooltip:"Eliminar en bloque los archivos antiguos",title:"Purgar archivos antiguos",description:"Limpie el historial de impresión antiguo. Cada archivo envejece según la finalización de su impresión más reciente — reimprimir un archivo actualiza su antigüedad, por lo que el trabajo activo nunca se purga.",ageLabel:"Eliminar los archivos no impresos en los últimos",days:"días",effectsTitle:"Qué ocurre cuando hace clic en Purgar",effect1:"Cada archivo coincidente se oculta de los listados y sus archivos se eliminan del disco (3MF, miniatura, time-lapse, 3MF de origen, archivo de diseño F3D, fotos).",effect2:"La fila del archivo permanece en la base de datos para que las estadísticas rápidas conserven la contribución de filamento, tiempo, coste y energía — igual que el comportamiento predeterminado de la eliminación de un solo archivo.",effect3:"Marque «Eliminar también de las estadísticas» abajo para descartar también la contribución a las estadísticas rápidas (coincide con la opción de eliminación de un solo archivo). Esa vía es irreversible.",effect4:"Reimprimir un archivo actualiza su reloj de antigüedad, por lo que los archivos que aún usa están a salvo.",purgeStatsLabel:"Eliminar también de las estadísticas",purgeStatsHint:"Descarta los archivos coincidentes de las estadísticas rápidas (filamento, tiempo, coste, energía). Sin esto, las estadísticas rápidas conservan todas las contribuciones y solo los archivos abandonan el disco.",previewLoading:"Comprobando cuántos archivos coinciden…",previewFailed:"No se pudo previsualizar la purga.",previewSummary:"{{count}} archivos · {{size}} se eliminarían",andMore:"…y {{count}} más",warning:"Los archivos se eliminan del disco y no se pueden restaurar. Descargue o marque como favorito todo lo que desee conservar antes de continuar.",confirmCta:"Eliminar {{count}} archivo(s)",purging:"Eliminando…",toast:{success:"Se eliminaron {{count}} archivo(s).",failed:"No se pudieron purgar los archivos."}},archiveAutoPurge:{enableLabel:"Purgar automáticamente los archivos antiguos",enableDescription:"Una vez al día, oculta los archivos de los listados y elimina sus archivos del disco cuando no se han impreso dentro del umbral. Reimprimir un archivo reinicia el reloj.",ageLabel:"Eliminar automáticamente los archivos no impresos en los últimos",ageDescription:"Mínimo 7 días, máximo 10 años. Se basa en la finalización de la impresión más reciente — reimprimir un archivo actualiza su antigüedad. Elimina el 3MF, la miniatura, el time-lapse, el 3MF de origen, el F3D y las fotos.",days:"días",purgeStatsLabel:"Eliminar también de las estadísticas",purgeStatsDescription:"Cuando está activado, el barrido diario también descarta cada archivo purgado de las estadísticas rápidas (filamento, tiempo, coste, energía). Desactivado de forma predeterminada — las estadísticas rápidas conservan la contribución, solo los archivos abandonan el disco.",runNow:"Purgar los archivos ahora",saveFailed:"No se pudieron guardar los ajustes de purga automática."},cameraTokens:{title:"Tokens de API de la cámara",navTitle:"Tokens de API de la cámara",description:"Tokens de larga duración para incrustar la transmisión de la cámara en Home Assistant, Frigate, quioscos o cualquier otra herramienta que necesite una URL estable. Cada token es exclusivo de la transmisión de la cámara y se puede revocar en cualquier momento.",loading:"Cargando…",confirmRevoke:{title:"¿Revocar este token?",body:'Cualquier dispositivo que use "{{name}}" perderá el acceso de inmediato. Esto no se puede deshacer.',cancel:"Cancelar",confirm:"Revocar"},create:{title:"Crear nuevo token",nameLabel:"Nombre del token",namePlaceholder:"p. ej. Home Assistant",daysLabel:"Días hasta la caducidad",submit:"Crear",hint:"La vida útil máxima es de 365 días. El valor del token se muestra solo una vez al crearlo — cópielo ahora."},created:{title:"Token creado — cópielo ahora",warning:"Esta es la única vez que este token estará visible. Después de cerrar este diálogo no podrá volver a verlo nunca.",copy:"Copiar",dismiss:"Lo he guardado"},list:{myTitle:"Mis tokens",allTitle:"Todos los usuarios (vista de administración)",empty:"Aún no hay tokens.",name:"Nombre",owner:"Propietario",prefix:"Prefijo",created:"Creado",expires:"Caduca",lastUsed:"Usado por última vez",revoke:"Revocar",expired:"Caducado"},toast:{created:"Token creado",createFailed:"Error al crear el token",revoked:"Token revocado",revokeFailed:"Error al revocar el token",loadFailed:"Error al cargar los tokens",copied:"Copiado al portapapeles",copyFailed:"Error al copiar — selecciónelo y cópielo manualmente"}},forecast:{title:"Previsión",noSpools:"No se encontraron bobinas activas. Añada bobinas a su inventario para ver los datos de previsión.",noUsageData:"No hay datos de uso disponibles — no se puede proyectar la cronología de existencias.",sku:"SKU",material:"Material",stock:"Existencias",dailyRate:"Tasa",daysLeft:"Días restantes",emptyBy:"Se agota el",reorderBy:"Reabastecer antes del",actions:"Acciones",trend:"Tendencia",estimated:"Est.",noData:"Sin datos",timeframe:"Periodo",chartTitle:"Existencias previstas — Los 5 materiales principales",dashedLinesROP:"Líneas discontinuas = puntos de reabastecimiento",stockLevel:"Nivel de existencias",reorderPoint:"Punto de reabastecimiento",safetyMargin:"Margen de seguridad",trendLegend:"Tendencia (basada en el historial, nivel de servicio del 95%)",estimatedLegend:"Estimada (diferencia de peso)",noDataLegend:"Sin datos",ropLabel:"PR",ssLabel:"ES",safetyStockLegend:"Existencias de seguridad",stockArrivalLegend:"Llegada de existencias",stockoutLegend:"Rotura de existencias",alertCount_one:"{{count}} alerta",alertCount_other:"{{count}} alertas",order:"Pedir",save:"Guardar",cancel:"Cancelar",settingsSaved:"Ajustes guardados",failedSaveSettings:"Error al guardar los ajustes",globalLeadTimeSaved:"Plazo de entrega global guardado",globalLeadTime:"Plazo de entrega global",globalLeadTimeHint:"Mínimo del plazo de entrega global — se usa en el cálculo del punto de reabastecimiento para todos los SKU",skuLeadTimeOverride:"Anulación del plazo de entrega del SKU",skuLeadTimeHint:"0 = usar el plazo de entrega global. Establezca >0 para anularlo para este SKU.",safetyMarginLabel:"Margen de seguridad",effectiveLeadTime:"Plazo de entrega efectivo",effectiveLeadTimeHint:"máx(global {{global}} d, SKU {{sku}} d)",reorderPointHint:"d̄ × PE + margen de seguridad — pida cuando las existencias alcancen este nivel",safetyMarginHint:"Existencias de seguridad estadísticas (z=1,65 × σ × √PE) + margen definido por el usuario",safetyMarginHintDays:"Margen añadido sobre las existencias de seguridad estadísticas.{{approx}}",safetyMarginHintDaysApprox:" ≈ {{g}} g a la tasa actual.",safetyMarginHintG:"Margen de peso fijo añadido sobre las existencias de seguridad estadísticas.{{approx}}",safetyMarginHintGApprox:" ≈ {{days}} d a la tasa actual.",individualSpools:"Bobinas individuales",labelWeight:"Etiqueta",spoolCount_one:"{{count}} bobina",spoolCount_other:"{{count}} bobinas",stockBreakRisk:"Riesgo de rotura de existencias",stockBreakDetail:"Quedan {{days}} d, plazo de entrega {{lt}} d.",stockBreakBefore:"Rotura de existencias antes del reabastecimiento",reorderNow:"Reabastecer ahora",reorderTriggerPassed:"La fecha de activación {{date}} ha pasado.",shoppingList:"Lista de la compra",shoppingListItems_one:"({{count}} artículo)",shoppingListItems_other:"({{count}} artículos)",shoppingListEmpty:"La lista de la compra está vacía. Haga clic en el icono del carrito de cualquier fila para añadir artículos.",addToCart:"Añadir a la lista de la compra",alertsSnoozed:"Silenciar las alertas de este SKU",alertsEnabled:"Reactivar las alertas de este SKU",addedToCart:"Añadido a la lista de la compra",failedAddItem:"Error al añadir el artículo",listView:"Lista",logisticsView:"Logística",qty:"Cant.",weight:"Peso",leadTime:"Plazo de entrega",expectedRestock:"Reabastecimiento previsto",status:"Estado",note:"Nota",pending:"Pendiente",purchased:"Comprado",received:"Recibido",markPurchased:"Marcar como comprado",markReceived:"Marcar como recibido — añade bobinas al inventario de existencias",resetToPending:"Restablecer a pendiente",remove:"Quitar",clearAll:"Borrar todo",downloadCsv:"CSV",addToCartTitle:"Añadir a la lista de la compra",byQuantity:"Por cantidad",byDuration:"Por duración",numberOfSpools:"Número de bobinas",lastHowManyDays:"¿Cuántos días debería durar?",noUsageQty:"No hay datos de uso — cantidad establecida en 1.",noteOptional:"Nota (opcional)",notePlaceholder:"p. ej. para el proyecto X, urgente…",addNSpools_one:"Añadir {{count}} bobina",addNSpools_other:"Añadir {{count}} bobinas",onArrival:"A la llegada",stockBreakIn:"Rotura de existencias en {{days}} d.",stockRunsOutBefore:"Las existencias se agotan antes de que transcurra el plazo de entrega de {{lt}} d.",atRate:"A {{rate}} g/día necesita",moreSpools_one:"{{count}} bobina más",moreSpools_other:"{{count}} bobinas más",bridgeGap:"para cubrir el déficit.",noReadAccess:"No tiene permiso para ver las previsiones de inventario.",noWriteAccess:"No tiene permiso para modificar los ajustes de previsión."}},wpe={nav:{printers:"Imprimantes",archives:"Archives",queue:"File d'attente d'impression",stats:"Statistiques",profiles:"Profils",maintenance:"Maintenance",projects:"Projets",inventory:"Filament",files:"Gestionnaire de fichiers",makerworld:"MakerWorld",notifications:"Notifications",settings:"Paramètres",system:"Système",collapseSidebar:"Réduire la barre latérale",expandSidebar:"Développer la barre latérale",update:"Mise à jour",updateAvailable:"Mise à jour disponible : v{{version}}",updateAvailableBanner:"La version {{version}} est disponible !",viewUpdate:"Voir la mise à jour",viewOnGithub:"Voir sur GitHub",keyboardShortcuts:"Raccourcis clavier (?)",switchToLight:"Passer au mode clair",switchToDark:"Passer au mode sombre",switchToSystem:"Passer au mode système",smartSwitches:"Interrupteurs intelligents",logout:"Déconnexion",installApp:"Installer l'application",installAppSuccess:"Bambuddy a été installé"},common:{save:"Enregistrer",saving:"Enregistrement...",cancel:"Annuler",delete:"Supprimer",edit:"Modifier",add:"Ajouter",close:"Fermer",confirm:"Confirmer",loading:"Chargement...",error:"Erreur",errorLoading:"Erreur de chargement",retry:"Réessayer",success:"Succès",warning:"Avertissement",enabled:"Activé",disabled:"Désactivé",yes:"Oui",no:"Non",on:"On",off:"Désactivé",all:"Tous",none:"Aucun",search:"Rechercher",filter:"Filtrer",sort:"Trier",refresh:"Actualiser",download:"Télécharger",upload:"Téléverser",uploading:"Téléversement...",uploadFailed:"Échec du téléversement",actions:"Actions",status:"Statut",name:"Nom",description:"Description",date:"Date",time:"Heure",hours:"heures",minutes:"minutes",seconds:"secondes",days:"jours",enable:"Activer",disable:"Désactiver",permissions:"Autorisations",noPrinters:"Aucune imprimante configurée",noData:"Aucune donnée disponible",linkNotFound:"Lien non trouvé",required:"Requis",optional:"Optionnel",dismiss:"Ignorer",apply:"Appliquer",reset:"Réinitialiser",export:"Exporter",import:"Importer",clear:"Effacer",selectAll:"Tout sélectionner",deselectAll:"Tout désélectionner",noChange:"— Aucun changement —",unchanged:"Inchangé",unassigned:"Non assigné",unknown:"Inconnu",unknownError:"Erreur inconnue",today:"Aujourd'hui",tomorrow:"Demain",asap:"Dès que possible",overdue:"En retard",now:"Maintenant",collapse:"Réduire",expand:"Développer",viewArchive:"Voir l'archive",viewInFileManager:"Voir dans le gestionnaire de fichiers",addedBy:"Ajouté par {{username}}",prints:"impressions",more:"+{{count}} de plus",ascending:"Croissant",descending:"Décroissant",back:"Retour",copy:"Copier",copied:"Copié !",printer:"Imprimante",remove:"Retirer",type:"Type",print:"Imprimer",rename:"Renommer",move:"Déplacer",create:"Créer",duplicate:"Dupliquer",left:"Gauche",right:"Droite"},printers:{addPreflight:{checking:"Vérification de la connexion...",warning:"Certaines vérifications de connexion ont échoué. Cette imprimante pourrait apparaître hors ligne. Examinez les vérifications ci-dessous, corrigez ce que vous pouvez, ou enregistrez quand même.",back:"Retour",saveAnyway:"Enregistrer quand même"},title:"Imprimantes",addPrinter:"Ajouter une imprimante",editPrinter:"Modifier l'imprimante",deletePrinter:"Supprimer l'imprimante",printerName:"Nom de l'imprimante",serialNumber:"Numéro de série",ipAddress:"Adresse IP / Nom d'hôte",accessCode:"Code d'accès",model:"Modèle",nozzleCount:"Nombre de buses",autoArchive:"Auto-archivage",status:{available:"Disponible",idle:"Inactif",printing:"Impression en cours",paused:"En pause",offline:"Hors ligne",problem:"Problème",error:"Erreur",finished:"Terminé",unknown:"Inconnu"},temperatures:{nozzle:"Buse",bed:"Plateau",chamber:"Chambre"},progress:"{{percent}}% terminé",timeRemaining:"{{time}} restant",deleteConfirm:'Êtes-vous sûr de vouloir supprimer "{{name}}" ?',maintenanceOk:"Maintenance OK",maintenanceWarning:"{{count}} avertissement",maintenanceWarning_plural:"{{count}} avertissements",maintenanceDue:"{{count}} échéance",maintenanceDue_plural:"{{count}} échéances",sort:{name:"Nom",status:"Statut",model:"Modèle",location:"Emplacement",ascending:"Tri croissant",descending:"Tri décroissant"},cardSize:{small:"Petites cartes",medium:"Cartes moyennes",large:"Grandes cartes",extraLarge:"Très grandes cartes"},hideOffline:"Masquer hors ligne",nextAvailable:"Prochaine disponible",powerOn:"Allumer",offlinePrintersWithPlugs:"Imprimantes hors ligne avec prises connectées",noPrintersConfigured:"Aucune imprimante configurée pour le moment",search:"Rechercher des imprimantes...",noSearchResults:"Aucune imprimante ne correspond à votre recherche ou à vos filtres",filter:{allStatuses:"Tous les statuts",allLocations:"Tous les emplacements"},toolbar:{filters:"Filtres",view:"Vue",actions:"Actions"},readyToPrint:"Prête à imprimer",external:"Externe",extL:"Ext-L",extR:"Ext-R",deleteArchives:"Supprimer les archives d'impression",noLabel:"Pas d'étiquette",printPreview:"Aperçu avant impression",width:"Largeur",height:"Hauteur",noObjectsFound:"Aucun objet trouvé",objectsLoadedOnPrintStart:"Les objets sont chargés au début de l'impression",willBeSkipped:"Sera sauté",name:"Nom",serialCannotBeChanged:"Le numéro de série ne peut pas être modifié",locationHelp:"Utilisé pour grouper les imprimantes et filtrer la file d'attente",wifiSignal:{veryWeak:"Très faible",weak:"Faible",fair:"Moyen",good:"Bon",excellent:"Excellent"},maintenanceUpToDate:"Maintenance à jour - Cliquez pour voir",chamberLightOn:"Allumer la lumière de la chambre",chamberLightOff:"Éteindre la lumière de la chambre",files:"Fichiers",browseFiles:"Parcourir les fichiers de l'imprimante",autoOffAfterPrint:"Extinction auto après impression",autoOffExecuted:"Extinction auto exécutée - rallumez pour réinitialiser",hmsErrors:"Erreurs HMS",viewHmsErrors:"Voir {{count}} erreur(s) HMS",resume:"Reprendre",pause:"Pause",stop:"Arrêter",camera:"Caméra",skipObject:"Sauter l'objet",reconnect:"Reconnecter",forceRefresh:"Forcer l'actualisation",forceRefreshSuccess:"Actualisation demandée",mqttDebug:"Débogage MQTT",printerInformation:"Informations imprimante",copyToClipboard:"Copier",copied:"Copié !",state:"État",wifiSignalLabel:"Signal WiFi",developerMode:"Mode développeur",enabled:"Activé",disabled:"Désactivé",addedOn:"Ajoutée le",sdCard:"Carte SD",inserted:"Insérée",notInserted:"Non insérée",totalPrintHours:"Heures d'impression",activeNozzle:"Active : buse {{nozzle}}",nozzleRack:"Rack à buses",nozzleDocked:"Rangée",nozzleMounted:"Montée",nozzleActive:"Actif",nozzleIdle:"Inactive",nozzleDiameter:"Diamètre",nozzleType:"Type",nozzleStatus:"Statut",nozzleFilament:"Filament",nozzleWear:"Usure",nozzleMaxTemp:"Temp Max",nozzleSerial:"Série",nozzleHardenedSteel:"Acier Trempé",nozzleStainlessSteel:"Acier Inoxydable",nozzleTungstenCarbide:"Carbure de Tungstène",nozzleFlow:"Débit",nozzleHighFlow:"Haut débit",nozzleStandardFlow:"Standard",firmwareUpdate:"Mise à jour Firmware",firmwareInstructions:"Sur l'écran de l'imprimante, allez dans",firmwareNav:"Naviguez vers",settings:"Paramètres",firmware:"Micrologiciel",discoverPrinters:"Découvrir les imprimantes",searching:"Recherche...",manualEntry:"Saisie manuelle",addFromCloud:"Ajouter depuis le Cloud",toast:{printerDeleted:"Imprimante supprimée",missingSpoolAssignment:"Impression démarrée sur {{printer}}. Attribution de bobine manquante pour : {{slots}}",printerAdded:"Imprimante ajoutée",printerUpdated:"Imprimante mise à jour",failedToDelete:"Échec de la suppression",failedToAdd:"Échec de l'ajout",connectionFailedNotAdded:"Connexion à l'imprimante impossible. Vérifiez l'IP, le numéro de série et le code d'accès, et confirmez que le mode LAN-only est activé. L'imprimante n'a pas été ajoutée.",failedToUpdate:"Échec de la mise à jour",commandSent:"Commande envoyée",failedToSendCommand:"Échec de l'envoi de la commande",turnedOn:"{{name}} allumée",failedToPowerOn:"Échec de l'allumage de {{name}}",scriptTriggered:"Script déclenché",printStopped:"Impression arrêtée",printPaused:"Impression en pause",printResumed:"Impression reprise",referenceDeleted:"Référence supprimée",detectionAreaSaved:"Zone de détection enregistrée",failedToRunScript:"Échec du script",failedToStopPrint:"Échec de l'arrêt",failedToPausePrint:"Échec de la mise en pause",failedToResumePrint:"Échec de la reprise",failedToControlChamberLight:"Échec du contrôle de la lumière",failedToSetSpeed:"Échec du réglage de la vitesse",failedToUpdateSetting:"Échec de mise à jour du paramètre",failedToSkipObjects:"Échec du saut d'objets",failedToRereadRfid:"Échec lecture RFID",failedToCheckPlate:"Échec vérification plateau",failedToUpdateLabel:"Échec mise à jour étiquette",failedToDeleteReference:"Échec suppression référence",failedToSaveDetectionArea:"Échec enregistrement zone",plateCheckEnabled:"Vérification plateau activée",plateCheckDisabled:"Vérification plateau désactivée",calibrationSaved:"Calibration enregistrée !",calibrationFailed:"Échec de la calibration",rfidRereadInitiated:"Lecture RFID initiée",loadInitiated:"Chargement du filament…",unloadInitiated:"Déchargement du filament…",failedToLoad:"Échec du chargement du filament",failedToUnload:"Échec du déchargement du filament"},connection:{connected:"Connecté",offline:"Hors ligne"},plateStatus:{markCleared:"Marquer le plateau comme dégagé",cleared:"Plateau dégagé",notCleared:"Plateau non dégagé",inUse:"Plateau en cours d'utilisation"},queue:{inQueue:"{{count}} impression en file",inQueue_plural:"{{count}} impressions en file"},controls:"Contrôles",rfid:{reread:"Relire RFID"},ams:{load:"Charger",unload:"Décharger"},bedJog:{title:"Déplacer le plateau",bed:"Plateau",step:"Pas (mm)",up:"Monter le plateau",down:"Descendre le plateau",disabledWhilePrinting:"Désactivé pendant l'impression",notHomedTitle:"Imprimante non référencée",notHomedMessage:"L'imprimante n'a pas été référencée depuis la dernière impression. Lancez la référence automatique d'abord pour un positionnement sûr (parque la tête d'outil, puis référence X, Y et Z), ou déplacez quand même — les butées logicielles seront ignorées.",homeZ:"Référence automatique",moveAnyway:"Déplacer quand même",homingStarted:"Référencement automatique en cours…"},permission:{noAdd:"Pas d'autorisation pour ajouter",noEdit:"Pas d'autorisation pour modifier",noDelete:"Pas d'autorisation pour supprimer",noControl:"Pas d'autorisation pour contrôler",noFiles:"Pas d'autorisation pour les fichiers",noAmsRfid:"Pas d'autorisation pour le RFID",noSmartPlugControl:"Pas d'autorisation pour les prises",noCamera:"Pas d'autorisation pour les caméras"},modal:{addTitle:"Ajouter une imprimante",editTitle:"Modifier l'imprimante",myPrinter:"Mon imprimante",selectModel:"Choisir un modèle...",locationGroup:"Emplacement / Groupe (optionnel)",locationPlaceholder:"ex: Atelier, Bureau",autoArchiveLabel:"Auto-archiver les impressions terminées",fromPrinterSettings:"Depuis les paramètres imprimante",modelOptional:"Modèle (optionnel)",saveChanges:"Enregistrer les modifications"},skipObjects:{tooltip:"Sauter des objets",onlyWhilePrinting:"Sauter (uniquement pendant l'impression)",requiresMultiple:"Sauter (nécessite 2+ objets)",title:"Sauter des objets",matchIdsInfo:"Faites correspondre les IDs avec l'écran de l'imprimante",printerShowsIds:"L'écran affiche les IDs des objets sur le plateau",skipSelected:"Sauter la sélection",skipping:"Saut en cours...",noObjectsSelected:"Aucun objet sélectionné",selectObjectsToSkip:"Sélectionnez les objets à ignorer",skipped:"sauté",objectsSkipped:"Objets sautés",activeCount:"{{count}} actifs",waitForLayer:"Attendez la couche 2 pour sauter des objets (actuelle : {{layer}})",skip:"Sauter",confirmTitle:"Sauter l'objet ?",confirmMessage:'Voulez-vous vraiment sauter "{{name}}" ? Cette action est irréversible.'},confirm:{deleteTitle:"Supprimer l'imprimante",deleteMessage:'Supprimer "{{name}}" ? Cela retirera tous les paramètres de connexion.',deleteArchivesNote:"Tout l'historique sera définitivement supprimé.",keepArchivesNote:"L'historique sera conservé mais plus associé à cette imprimante.",stopTitle:"Arrêter l'impression",stopMessage:`Arrêter l'impression sur "{{name}}" ?`,stopButton:"Arrêter",pauseTitle:"Mettre en pause",pauseMessage:`Mettre en pause l'impression sur "{{name}}" ?`,pauseButton:"Pause",resumeTitle:"Reprendre l'impression",resumeMessage:`Reprendre l'impression sur "{{name}}" ?`,resumeButton:"Reprendre",powerOnTitle:"Allumer l'imprimante",powerOnMessage:'Allumer "{{name}}" ?',powerOnButton:"Allumer",powerOffTitle:"Éteindre l'imprimante",powerOffMessage:'Éteindre "{{name}}" ?',powerOffWarning:`ATTENTION : "{{name}}" imprime ! L'éteindre maintenant peut endommager l'imprimante.`,powerOffButton:"Éteindre",haToggleTitle:'Basculer "{{name}}"',haToggleMessage:"Basculer l'entité Home Assistant {{entity}} ? Cela peut couper l'alimentation si elle est actuellement activée.",haToggleWarning:`ATTENTION : "{{name}}" imprime ! Basculer {{entity}} peut couper l'alimentation et interrompre l'impression. Continuer ?`,haToggleButton:"Basculer"},bulk:{select:"Sélectionner",selectAll:"Tout sélectionner",selectByLocation:"Sélectionner par emplacement",selected:"{{count}} sélectionné(s)",actions:{stop:"Arrêter",pause:"Pause",resume:"Reprendre",clearPlate:"Vider le plateau",clearHMS:"Effacer les notifications"},confirm:{stopTitle:"Arrêter {{count}} impressions",stopMessage:"Cela annulera les impressions actives sur {{count}} imprimante(s). Cette action est irréversible.",stopButton:"Tout arrêter",pauseTitle:"Mettre en pause {{count}} impressions",pauseMessage:"Cela mettra en pause les impressions actives sur {{count}} imprimante(s).",pauseButton:"Tout mettre en pause",clearPlateTitle:"Vider {{count}} plateaux",clearPlateMessage:"Cela videra le plateau sur {{count}} imprimante(s) et pourrait lancer les travaux en file d'attente.",clearPlateButton:"Tout vider"},success:"{{action}} terminé sur {{count}} imprimante(s)",partial:"{{succeeded}} réussi(s), {{failed}} échoué(s)",noneApplicable:"Aucune imprimante sélectionnée n'est dans le bon état pour cette action",selectByState:"Sélectionner par état"},discovery:{title:"Découvrir les imprimantes",searching:"Recherche...",scanning:"Scan en cours...",scanProgress:"Scan... {{scanned}}/{{total}}",foundPrinters:"{{count}} imprimante(s) trouvée(s)",noPrintersFound:"Aucune imprimante trouvée",noPrintersFoundSubnet:"Aucune imprimante dans ce sous-réseau.",noPrintersFoundNetwork:"Aucune imprimante sur le réseau.",allConfigured:"Toutes les imprimantes trouvées sont déjà configurées.",alreadyAdded:"Déjà ajoutée",select:"Sélectionner",manualEntry:"Saisie manuelle",addFromCloud:"Ajouter depuis le Cloud",subnetToScan:"Sous-réseau à scanner",dockerNote:"Docker détecté. Entrez le sous-réseau en notation CIDR. Nécessite network_mode: host.",scanSubnet:"Scanner le sous-réseau",discoverNetwork:"Découvrir sur le réseau",scanningSubnet:"Scan du sous-réseau pour imprimantes Bambu...",scanningNetwork:"Scan du réseau...",serialRequired:"Série requis",unknown:"Inconnu",failedToStart:"Échec du démarrage de la découverte",customSubnetOption:"Sous-réseau personnalisé...",customSubnetLabel:"Sous-réseau personnalisé (CIDR)",customSubnetNote:"Utilisez un sous-réseau personnalisé si votre imprimante se trouve sur un réseau différent de celui de ce serveur. Les ports FTP (990) et MQTT (8883) doivent être accessibles à travers la limite de routage."},drying:{start:"Démarrer le séchage",stop:"Arrêter le séchage",temperature:"Température",duration:"Durée",hours:"heures",timeRemaining:"{{time}} restant",active:"Séchage",notSupported:"Séchage non pris en charge",powerRequired:"Brancher l'adaptateur secteur AMS pour activer le séchage",startingDrying:"Démarrage du séchage...",stoppingDrying:"Arrêt du séchage...",rotateTray:"Tourner la bobine pendant le séchage"},filaments:"Filaments",openCameraOverlay:"Ouvrir la caméra en superposition",openCameraWindow:"Ouvrir la caméra dans une fenêtre",firmwareUpdateAvailable:"Mise à jour firmware : {{current}} → {{latest}}",firmwareUpToDate:"Firmware {{version}} — À jour",firmwareUpdateButton:"Mettre à jour",plateDetection:{noPermission:"Pas d'autorisation de modification",enabledClick:"Vérification activée - Cliquez pour désactiver",disabledClick:"Vérification désactivée - Cliquez pour activer",manageCalibration:"Gérer la calibration de détection",calibrationRequired:"Calibration requise",calibrationInstructions:"Videz le plateau, puis cliquez sur Calibrer.",calibrationDescription:"Capture une image de référence du plateau vide.",calibrationTip:"Conseil : Stockez jusqu'à 5 références. Le système utilise la meilleure correspondance.",plateEmpty:"Le plateau semble vide",objectsDetected:"Objets détectés sur le plateau",confidence:"Confiance",difference:"Différence",analysisPreview:"Aperçu de l'analyse :",analysisLegend:"Cadre vert = zone, Rouge = différences",savedReferences:"Références ({{count}}/{{max}})",deleteReference:"Supprimer la référence",labelPlaceholder:"Étiquette...",clickToEdit:"{{label}} - Modifier",clickToAddLabel:"Ajouter une étiquette"},speed:{title:"Vitesse d'impression",silent:"Silencieux (50%)",standard:"Standard (100%)",sport:"Sport (124%)",ludicrous:"Ludicrous (166%)"},airduct:{title:"Mode conduit d'air",cooling:"Refroidissement",heating:"Chauffage"},noSdCard:"Pas de SD",door:{open:"Ouverte",closed:"Fermée"},fans:{partCooling:"Ventilateur pièce",auxiliary:"Ventilateur auxiliaire",chamber:"Ventilateur chambre"},clickToViewHmsErrors:"Cliquez pour voir les erreurs HMS",estimatedCompletion:"Fin estimée",plateNumber:"Plaque {{number}}",slotOptions:"Options du slot",amsPopup:{friendlyName:"Nom AMS",friendlyNamePlaceholder:"ex. Nom convivial AMS",serialNumber:"Numéro de série",firmwareVersion:"Micrologiciel",save:"Enregistrer",clear:"Effacer",noEditPermission:"Vous n'avez pas la permission de renommer les unités AMS"},firmwareModal:{title:"Mise à jour Firmware",titleUpToDate:"Infos Firmware",currentVersion:"Actuelle :",latestVersion:"Dernière :",releaseNotes:"Notes de version",checkingPrereqs:"Vérification des prérequis...",sdCardReady:"Carte SD prête. Cliquez pour téléverser.",uploadedSuccess:"Firmware téléversé !",applyInstructions:"Pour appliquer sur l'imprimante :",step1:"Sur l'écran, allez dans Paramètres",step2:"Allez dans Firmware",step3:'Sélectionnez "Mettre à jour depuis carte SD"',step4:"Prévoyez 10-20 minutes",done:"Terminé",starting:"Démarrage...",uploadFirmware:"Téléverser le Firmware",uploadFailed:"Échec du téléversement : {{error}}",uploadedToast:"Firmware téléversé ! Lancez la mise à jour sur l'écran.",availableVersions:"Versions disponibles",usable:"Utilisable",unavailable:"Indisponible",installed:"Installé",newerBadge:"plus récent",olderBadge:"plus ancien",currentBadge:"actuel"},accessCodePlaceholder:"Laissez vide pour garder l'actuel",roi:{title:"Zone de détection (ROI)",xStart:"Début X",yStart:"Début Y",width:"Largeur",height:"Hauteur",instruction:"Ajustez le cadre vert pour cibler le plateau."},developerModeWarning:"Le mode développeur LAN n'est pas activé sur : {{names}}. Certaines fonctionnalités peuvent ne pas fonctionner.",howToEnable:"Comment activer",incompatibleFile:"Ce fichier a été tranché pour {{slicedFor}}, mais cette imprimante est une {{printerModel}}",dropNotPrintable:"Seuls les fichiers .gcode et .gcode.3mf peuvent être imprimés",dropToPrint:"Déposer pour imprimer",cannotPrint:"Imprimante occupée"},archives:{title:"Archives d'impression",searchPlaceholder:"Chercher dans les archives...",filterByPrinter:"Par imprimante",filterByStatus:"Par statut",sortBy:"Trier par",sortNewest:"Plus récent",sortOldest:"Plus ancien",sortName:"Nom",sortDuration:"Durée",sortLargest:"Plus volumineux",sortSmallest:"Plus léger",sortSize:"Taille",noArchives:"Aucune archive trouvée",noArchivesSearch:"Aucune archive ne correspond",originalPrintNotVisible:"Impression d'origine non visible - essayez d'effacer les filtres",noArchivesYet:"Pas encore d'archive",prints:"impressions",pagination:{showing:"Affichage",to:"à",of:"sur",show:"Afficher",page:"Page",all:"Tout"},loadingArchives:"Chargement...",releaseToUpload:"Relâcher pour téléverser",showAll:"Tout afficher",showFavoritesOnly:"Favoris uniquement",gridView:"Grille",listView:"Liste",calendarView:"Calendrier",logView:"Journal d'impression",manageTags:"Gérer les tags",showFailedPrints:"Afficher les échecs",hideFailedPrints:"Masquer les échecs",hideDuplicates:"Masquer les doublons",viewOriginalPrint:"Cliquez pour afficher l'impression originale (#{{id}})",printTime:"Temps d'impression",filamentUsed:"Filament utilisé",cost:"Coût",reprint:"Réimprimer",preview:"Aperçu",deleteArchive:"Supprimer l'archive",deleteConfirm:"Supprimer cette archive ?",favorite:"Favori",unfavorite:"Retirer des favoris",viewDetails:"Détails",status:{completed:"Réussi",failed:"Échoué",stopped:"Arrêté"},toast:{source3mfAttached:"Source 3MF attachée : {{filename}}",failedUploadSource3mf:"Échec téléversement 3MF",source3mfRemoved:"Source 3MF retirée",failedRemoveSource3mf:"Échec retrait 3MF",f3dAttached:"F3D attaché : {{filename}}",failedUploadF3d:"Échec téléversement F3D",f3dRemoved:"F3D retiré",failedRemoveF3d:"Échec retrait F3D",timelapseAttached:"Timelapse attaché : {{filename}}",timelapseAlreadyAttached:"Timelapse déjà présent",noMatchingTimelapse:"Pas de timelapse correspondant",failedScanTimelapse:"Échec scan timelapse",failedAttachTimelapse:"Échec attache timelapse",timelapseRemoved:"Timelapse supprimé",failedRemoveTimelapse:"Échec de la suppression du timelapse",timelapseUploaded:"Timelapse importé : {{filename}}",failedUploadTimelapse:"Échec de l'importation du timelapse",archiveDeleted:"Archive supprimée",failedDeleteArchive:"Échec suppression",addedToFavorites:"Ajouté aux favoris",removedFromFavorites:"Retiré des favoris",projectUpdated:"Projet mis à jour",failedUpdateProject:"Échec mise à jour projet",linkCopied:"Lien copié",failedCopyLink:"Échec copie lien",photoDeleted:"Photo supprimée",failedDeletePhoto:"Échec suppression photo",failedDeleteArchives:"Échec suppression archives",failedUpdateFavorites:"Échec mise à jour favoris",exportDownloaded:"Export téléchargé",exportFailed:"Échec export"},menu:{print:"Imprimer",schedule:"Planifier",openInBambuStudio:"Ouvrir dans le Slicer",slice:"Découper",externalLink:"Lien externe",viewOnMakerWorld:"Voir sur MakerWorld",preview3d:"Aperçu 3D",viewTimelapse:"Voir le Timelapse",scanForTimelapse:"Scanner pour Timelapse",uploadTimelapse:"Importer un timelapse",removeTimelapse:"Supprimer le timelapse",downloadSource3mf:"Télécharger Source 3MF",uploadSource3mf:"Téléverser Source 3MF",replaceSource3mf:"Remplacer Source 3MF",removeSource3mf:"Retirer Source 3MF",uploadF3d:"Téléverser F3D",replaceF3d:"Remplacer F3D",downloadF3d:"Télécharger F3D",removeF3d:"Retirer F3D",download:"Télécharger",copyDownloadLink:"Copier lien de téléchargement",qrCode:"Code QR",viewPhotos:"Voir les photos",viewPhotosCount:"Voir les photos ({{count}})",projectPage:"Page du Projet",addToFavorites:"Ajouter aux favoris",removeFromFavorites:"Retirer des favoris",edit:"Modifier",printLog:"Journal d'impression",goToProject:"Aller au Projet : {{name}}",addToProject:"Ajouter au Projet",removeFromProject:"Retirer du Projet",loading:"Chargement...",noProjectsAvailable:"Aucun projet disponible",searchProjects:"Rechercher des projets…",select:"Sélectionner",deselect:"Désélectionner",delete:"Supprimer"},permission:{noReprint:"Pas d'autorisation de réimpression",noAddToQueue:"Pas d'autorisation pour la file",noUpdateArchives:"Pas d'autorisation de mise à jour",noUploadFiles:"Pas d'autorisation de téléversement",noDownload:"Pas d'autorisation de téléchargement",noCopyLink:"Pas d'autorisation de copie lien",noDelete:"Pas d'autorisation de suppression",noCreate:"Pas d'autorisation de création"},platePicker:{title:"Choisir une plaque à prévisualiser",hint:"Cette archive contient plusieurs plaques. Sélectionnez-en une pour l'ouvrir dans la visionneuse GCode.",plateLabel:"Plaque {{index}}",objectCount:"{{count}} objet",objectCount_plural:"{{count}} objets",noGcode:"Cette archive ne contient pas de G-code généré à prévisualiser. Ouvrez-la d'abord dans Bambu Studio pour la trancher."},card:{previousPlate:"Plateau précédent",nextPlate:"Plateau suivant",plateNumber:"Plateau {{index}}",moreOptions:"Clic droit pour plus d'options",addToFavorites:"Ajouter aux favoris",removeFromFavorites:"Retirer des favoris",cancelled:"annulé",failed:"échoué",duplicate:"doublon",duplicateTitle:"Ce modèle a déjà été imprimé",openSource3mf:"Ouvrir 3MF dans Bambu Studio (clic droit pour plus)",downloadF3d:"Télécharger fichier Fusion 360",viewTimelapse:"Voir timelapse",viewPhoto:"Voir 1 photo",viewPhotos:"Voir {{count}} photos",openFolder:"Ouvrir le dossier : {{name}}",slicedFile:"Fichier découpé - prêt",sourceFile:"Fichier source uniquement - pas de mapping AMS",gcode:"GCODE",source:"SOURCE",project:"Projet : {{name}}",runsBadge:"{{count}} impressions",runsBadgeTitle:"{{count}} impressions au total — {{successful}} réussies, {{failed}} échouées. Cliquez pour voir le journal complet.",estimated:"Estimé : {{time}}",actual:"Réel : {{time}}",accuracy:"Précision : {{percent}}%",filament:"{{weight}} g",layer:"{{count}} couche",layers:"{{count}} couches",object:"{{count}} objet",objects:"{{count}} objets",slicedFor:"Découpé pour {{model}}",uploadedBy:"Téléversé par",noPermissionReprint:"Pas d'autorisation de réimpression",noFileForReprint:"Aucun fichier 3MF disponible — le fichier n'a pas pu être téléchargé depuis l'imprimante lors de l'enregistrement",noPermissionEdit:"Pas d'autorisation de modification",noPermissionDelete:"Pas d'autorisation de suppression",reprint:"Réimprimer",schedulePrint:"Planifier",schedule:"Planifier",openInBambuStudio:"Ouvrir dans le Slicer",openInBambuStudioToSlice:"Ouvrir dans le Slicer pour découper",slice:"Découper",externalLink:"Lien externe",makerWorld:"MakerWorld : {{designer}}",viewProject:"Voir projet",noExternalLink:"Aucun lien externe",preview3d:"Aperçu 3D",download:"Télécharger",edit:"Modifier",delete:"Supprimer"},runLog:{title:"Journal d'impression",modalTitle:"Journal d'impression — {{name}}",modalTitleFallback:"cette archive",empty:"Aucun événement d'impression enregistré pour cette archive.",col:{date:"Date",status:"Statut",duration:"Durée",filament:"Filament",cost:"Coût"},status:{completed:"Terminé",failed:"Échoué",cancelled:"Annulé",stopped:"Arrêté",skipped:"Ignoré",printing:"Impression en cours"}},modal:{deleteArchive:"Supprimer l'archive",deleteConfirm:'Supprimer "{{name}}" ? Cette action est irréversible.',deleteButton:"Supprimer",deletePurgeStats:"Retirer également cette impression des Quick Stats (filament, temps, coût, énergie)",removeSource3mf:"Retirer Source 3MF",removeSource3mfConfirm:'Retirer le fichier 3MF de "{{name}}" ?',removeButton:"Retirer",removeF3d:"Retirer F3D",removeF3dConfirm:'Retirer le fichier Fusion 360 de "{{name}}" ?',removeTimelapse:"Supprimer le timelapse",removeTimelapseConfirm:'Êtes-vous sûr de vouloir supprimer la vidéo timelapse de "{{name}}" ?',timelapse:"{{name}} – Timelapse",selectTimelapse:"Choisir un Timelapse",selectTimelapseDesc:"Sélectionnez manuellement le timelapse :",deleteArchives:"Supprimer les archives",deleteArchivesConfirm:"Supprimer {{count}} archive(s) ?",deleteCount:"Supprimer {{count}}"},page:{title:"Archives",printsCount:"{{filtered}} sur {{total}} impressions",dropFilesHere:"Déposez les fichiers .3mf ici",releaseToUpload:"Relâcher pour téléverser",only3mfSupported:"Seuls les fichiers .3mf sont supportés",close:"Fermer",selected:"{{count}} sélectionnés",selectAll:"Tout sélectionner",tags:"Étiquettes",project:"Projet",favorite:"Favori",delete:"Supprimer",toggledFavorites:"Favoris mis à jour pour {{count}} archive(s)",failedUpdateFavorites:"Échec mise à jour favoris",archivesDeleted:"{{count}} archive(s) supprimée(s)",failedDeleteArchives:"Échec suppression",photoDeleted:"Photo supprimée",failedDeletePhoto:"Échec suppression photo"},list:{name:"Nom",printer:"Imprimante",date:"Date",size:"Taille",actions:"Actions",hasTimelapse:"A un timelapse"},log:{date:"Date",printName:"Nom de l'impression",printer:"Imprimante",user:"Utilisateur",status:"Statut",duration:"Durée",filament:"Filament",allPrinters:"Toutes les imprimantes",allUsers:"Tous les utilisateurs",allStatuses:"Tous les statuts",cancelled:"Annulé",skipped:"Ignoré",dateFrom:"Du",dateTo:"Au",noEntries:"Aucune entrée de journal trouvée",showing:"{{count}} sur {{total}} entrées",rowsPerPage:"Lignes",page:"Page",prev:"Préc.",next:"Suiv.",clearLog:"Effacer le journal",clearLogTitle:"Effacer le journal d'impression",clearLogConfirm:"Toutes les entrées du journal d'impression seront supprimées définitivement. Les archives et les éléments de file d'attente ne sont pas affectés. Cette action est irréversible. Êtes-vous sûr ?",clearLogButton:"Tout effacer",cleared:"{{count}} entrées de journal effacées",clearFailed:"Échec de l'effacement du journal d'impression"}},queue:{filamentShort:{rowBadge:"Filament insuffisant pour la bobine assignee",rowTooltip:"Le planificateur a signale cet element. Cliquez sur Lecture pour voir le deficit par emplacement et decider de lancer quand meme l'impression.",confirmTitle:"Filament insuffisant",confirmIntro:"La bobine assignee ne peut pas couvrir au moins un emplacement. Imprimer quand meme ?",lineItem:"Emplacement {{slot}} : besoin de {{required}} g, {{remaining}} g restants",unknown:"inconnu",printAnyway:"Imprimer quand meme"},title:"File d'attente",subtitle:"Gérez vos travaux d'impression",addToQueue:"Ajouter à la file",print:"Imprimer",reprint:"Réimprimer",schedulePrint:"Planifier",editQueueItem:"Modifier l'élément",printToPrinters:"Imprimer sur {{count}} imprimantes",queueToPrinters:"Ajouter à la file pour {{count}} imprimantes",queueSelectedPlates:"Ajouter {{count}} plaques à la file",selectAllPlates:"Sélectionner les {{count}} plaques",deselectAll:"Tout désélectionner",printQueued:"Impression ajoutée à la file",itemsQueued:"{{count}} éléments ajoutés à la file",sending:"Envoi...",sendingProgress:"Envoi {{current}}/{{total}}...",adding:"Ajout...",addingProgress:"Ajout {{current}}/{{total}}...",savingProgress:"Enregistrement {{current}}/{{total}}...",clearQueue:"Vider la file",clearHistory:"Effacer l'historique",emptyQueue:"La file est vide",position:"Position",scheduledTime:"Heure prévue",moveUp:"Monter",moveDown:"Descendre",startNow:"Démarrer maintenant",printingInProgress:"Impression en cours...",viewArchive:"Voir l'archive",viewInFileManager:"Voir dans le gestionnaire",itemCount:"{{count}} élément",itemCount_plural:"{{count}} éléments",dragToReorder:"Glisser pour réordonner (ASAP uniquement)",reorderHint:"La position n'affecte que les éléments ASAP.",sjf:{label:"SJF",tooltip:"Travail le plus court en premier — le planificateur priorise les impressions plus courtes"},addedBy:"Ajouté par {{name}}",nextInQueue:"Prochain en file",clearPlateSuccess:"Plateau vidé — prêt pour l'impression suivante",plateNumber:"Plateau {{index}}",quantity:"Quantité",quantityHint:"Crée {{count}} éléments de file d'attente",activeBatches:"Lots actifs",batchProgress:"{{completed}} sur {{total}} terminés",cancelBatch:"Annuler les restants",batchCancelled:"Éléments restants du lot annulés",cancelBatchConfirmTitle:"Annuler le lot",cancelBatchConfirmMessage:"Annuler tous les éléments en attente restants dans ce lot ?",batch:"Lot",sections:{currentlyPrinting:"En cours",queued:"En attente",history:"Historique"},status:{pending:"En attente",waiting:"En attente",printing:"Impression",paused:"En pause",completed:"Terminé",failed:"Échoué",skipped:"Sauté",cancelled:"Annulé"},summary:{printing:"Impressions",queued:"En attente",totalTime:"Temps total estimé",totalWeight:"Poids total estimé",history:"Historique"},filter:{allPrinters:"Toutes les imprimantes",unassigned:"Non assigné",allStatus:"Tous les statuts",allLocations:"Tous les emplacements",any:"Tout"},sort:{byPosition:"Par position",byName:"Par nom",byPrinter:"Par imprimante",bySchedule:"Par planification",byDate:"Par date",ascendingOldest:"Croissant (plus vieux)",descendingNewest:"Décroissant (plus récent)"},badges:{staged:"Préparé",requiresPrevious:"Nécessite succès précédent",autoPowerOff:"Extinction auto",gcodeInjection:"G-code"},empty:{title:"Aucune impression prévue",description:"Planifiez depuis les Archives ou glissez des fichiers ici."},time:{asap:"Dès que possible",overdue:"En retard",now:"Maintenant",lessThanMinute:"Dans moins d'une minute",inMinutes:"Dans {{count}} min",inHours:"Dans {{count}} heures"},actions:{stopPrint:"Arrêter",startPrint:"Démarrer",requeue:"Remettre en file"},bulkEdit:{title:"Modifier {{count}} élément",title_plural:"Modifier {{count}} éléments",description:"Seuls les changements seront appliqués.",printer:"Imprimante",noChange:"— Aucun changement —",queueOptions:"Options de file",staged:"Préparé (manuel)",autoPowerOff:"Extinction auto après",requirePrevious:"Requiert succès précédent",printOptions:"Options d'impression",bedLevelling:"Nivellement plateau",flowCalibration:"Calibration débit",vibrationCalibration:"Vibration (Input Shaper)",layerInspection:"Inspection 1ère couche",timelapse:"Time-lapse",useAms:"Utiliser AMS",applyChanges:"Appliquer",selectAll:"Tout sélectionner",deselectAll:"Tout désélectionner",selected:"{{count}} sélectionnés",editSelected:"Modifier la sélection",cancelSelected:"Annuler la sélection"},confirm:{cancelTitle:"Annuler l'impression prévue",cancelMessage:'Annuler "{{name}}" ?',stopTitle:"Arrêter l'impression",stopMessage:`Arrêter "{{name}}" sur l'imprimante ?`,removeTitle:"Retirer de l'historique",removeMessage:`Retirer "{{name}}" de l'historique ?`,clearHistoryTitle:"Effacer l'historique",clearHistoryMessage:"Retirer les {{count}} éléments ?",cancelButton:"Annuler l'impression",stopButton:"Arrêter l'impression",thisPrint:"cette impression",thisItem:"cet élément"},toast:{cancelled:"Élément annulé",cancelFailed:"Échec annulation",removed:"Élément retiré",removeFailed:"Échec retrait",stopped:"Impression arrêtée",stopFailed:"Échec arrêt",released:"Libéré dans la file",startFailed:"Échec démarrage",reorderFailed:"Échec réorganisation",historyCleared:"{{count}} éléments effacés",clearHistoryFailed:"Échec effacement",updateFailed:"Échec mise à jour",bulkCancelled:"{{count}} éléments annulés",bulkCancelFailed:"Échec annulation"},timeline:{listView:"Liste",timelineView:"Chronologie",unassigned:"Non attribué",noData:"Aucune impression planifiée pour ce jour",allDoneBy:"Toutes les impressions terminées vers {{time}}",staged:"En attente",filterAll:"Tout afficher",filterPrinting:"En cours",filterQueued:"En file",time:{anyMoment:"imminent",minutesLeft:"{{minutes}}m restantes",hoursLeft:"{{hours}}h restantes",hoursMinutesLeft:"{{hours}}h {{minutes}}m restantes"},day:{previous:"Jour précédent",next:"Jour suivant",today:"Aujourd'hui"}},permissions:{noStopPrint:"Pas d'autorisation d'arrêt",noStartPrint:"Pas d'autorisation de démarrage",noEdit:"Pas d'autorisation de modification",noCancel:"Pas d'autorisation d'annulation",noRequeue:"Pas d'autorisation de remise en file",noRemove:"Pas d'autorisation de retrait",noClearHistory:"Pas d'autorisation historique",noEditItems:"Pas d'autorisation modification groupée",noCancelItems:"Pas d'autorisation annulation groupée"}},backgroundDispatch:{unknownFile:"Fichier inconnu",unknownPrinter:"Imprimante inconnue",startingPrints:"Démarrage des impressions",progressSummary:"{{complete}}/{{total}} terminés • Envoyés : {{dispatched}} • En cours : {{processing}}",expandDetails:"Expand dispatch details",collapseDetails:"Collapse dispatch details",dismissToast:"Ignorer la notification d'envoi",cancelDispatchJob:"Annuler l'envoi",cancel:"Annuler",cancelling:"Annulation…",awaitingPrinter:"En attente de l'imprimante…",status:{dispatched:"Dispatché",processing:"Traitement",completed:"Terminé",failed:"Échoué",cancelled:"Annulé"},toast:{cancellingUpload:"Cancelling upload...",cancelled:"Envoi annulé",cancelFailed:"Échec de l'annulation de l'envoi",completeWithFailures:"Envoi en arrière-plan terminé : {{completed}} réussi(s), {{failed}} échoué(s)",completeSuccess:"Envoi en arrière-plan terminé : {{completed}} réussi(s)",printStartedRemaining:"{{completed}} impression(s) lancée(s), {{remaining}} en cours d'envoi..."}},stats:{title:"Statistiques",subtitle:"Glissez les widgets pour réorganiser. Cliquez sur l'œil pour masquer.",overview:"Vue d'ensemble",totalPrints:"Total impressions",successRate:"Taux de succès",totalPrintTime:"Temps total d'impression",printTime:"Temps d'impression",totalFilament:"Total filament utilisé",filamentUsed:"Filament utilisé",filamentCost:"Coût filament",totalCost:"Coût total",energyUsed:"Énergie consommée",energyCost:"Coût énergie",energyWarmingUpTooltip:"Le suivi énergétique collecte encore des instantanés horaires. Les totaux par période deviendront précis dès qu’un instantané existera avant la plage sélectionnée. Les premières valeurs peuvent être sous-estimées.",averagePrintTime:"Temps moyen par impression",printsPerDay:"Impressions par jour",byPrinter:"Par imprimante",printsByPrinter:"Impressions par imprimante",byMaterial:"Par matériau",byMonth:"Par mois",last7Days:"7 derniers jours",last30Days:"30 derniers jours",last90Days:"90 derniers jours",allTime:"Tout le temps",quickStats:"Stats rapides",printActivity:"Activité d'impression",filamentTypes:"Types de filament",filamentTrends:"Tendances filament",failureAnalysis:"Analyse des échecs",timeAccuracy:"Précision du temps",successful:"Succès :",failed:"Échecs :",cancelled:"Annulés :",perfectEstimate:"100% = estimation parfaite",noTimeAccuracyData:"Pas encore de données de précision",noFilamentData:"Aucune donnée de filament",noPrinterData:"Aucune donnée d'imprimante",noPrintData:"Aucune donnée d'impression",noPrintDataLast30Days:"Aucune impression ces 30 derniers jours",failureReasons:"Raisons des échecs",topFailureReasons:"Top raisons d'échec",failedPrintsCount:"{{failed}} / {{total}} impressions ont échoué",lastWeekRate:"Semaine dernière : {{rate}}%",resetLayout:"Réinitialiser la mise en page",recalculateCosts:"Recalculer les coûts",recalculateCostsHint:"Recalcule les coûts avec les prix actuels des filaments",exportStats:"Exporter les stats",exportAsCsv:"Exporter en CSV",exportAsExcel:"Exporter en Excel",hiddenCount:"{{count}} Masqués",exportDownloaded:"Export téléchargé",exportFailed:"Échec export",layoutReset:"Mise en page réinitialisée",recalculatedCosts:"Coûts recalculés pour {{count}} archives",recalculateFailed:"Échec du calcul",loadingStats:"Chargement des statistiques...",noPermissionResetLayout:"Pas d'autorisation de réinitialisation",noPermissionRecalculate:"Pas d'autorisation de recalcul",noPrintDataInRange:"Aucune donnée dans la période sélectionnée",periodFilament:"Filament utilisé",periodCost:"Coût",avgPerPrint:"Moy. par impression",usageOverTime:"Utilisation dans le temps",filamentByWeight:"Poids",printDuration:"Durée d'impression",printerUtilization:"Utilisation imprimante",filamentSuccess:"Succès par matériau",printHabits:"Habitudes d'impression",printTimeOfDay:"Heure d'impression",colorDistribution:"Distribution des couleurs",noColorData:"Aucune donnée de couleur disponible",records:"Enregistrements",longestPrint:"Plus longue impression",heaviestPrint:"Plus lourde impression",mostExpensivePrint:"Plus chère",busiestDay:"Jour le plus actif",successStreak:"Série de succès",streakPrint:"impression consécutive",streakPrints:"{{count}} impressions consécutives",printerStats:"Stats imprimante",hours:"heures",avgPrints:"Moy. impressions",noArchiveData:"Aucune donnée d'impression disponible",filamentByTime:"Temps",avgWeight:"Moy. poids",avgTime:"Moy. temps",filamentByPrints:"Impressions",timeframe:{today:"Aujourd'hui","this-week":"Cette semaine","this-month":"Ce mois","last-7":"7 derniers jours","last-30":"30 derniers jours","last-90":"90 derniers jours","this-year":"Cette année","all-time":"Tout",custom:"Personnalisé",from:"Du",to:"Au"},allUsers:"Tous les utilisateurs",noUser:"Aucun utilisateur (Système)",filterByUser:"Filtrer par utilisateur"},maintenance:{title:"Maintenance",overview:"Vue d'ensemble",allOk:"Toute la maintenance est à jour",dueCount:"{{count}} tâche à faire",dueCount_plural:"{{count}} tâches à faire",warningCount:"{{count}} avertissement",warningCount_plural:"{{count}} avertissements",totalPrintTime:"Temps d'impression total",nextMaintenance:"Prochaine maintenance",nothingDue:"Rien de prévu",tasks:"Tâches",lastPerformed:"Dernière réalisation",interval:"Intervalle",hoursRemaining:"{{hours}}h restantes",hoursOverdue:"{{hours}}h de retard",markDone:"Marquer comme fait",performMaintenance:"Effectuer la maintenance",history:"Historique",noHistory:"Aucun historique",editPrintHours:"Modifier les heures d'impression",currentHours:"Heures actuelles",statusTab:"Statut",settingsTab:"Paramètres",overdueCount:"{{count}} en retard",dueSoonCount:"{{count}} bientôt",dueSoon:"Bientôt",allGood:"Tout va bien",overdueBy:"Retard de {{duration}}",dueIn:"Dans {{duration}}",timeLeft:"{{duration}} restant",day:"1 jour",days:"{{count}} jours",week:"1 semaine",weeks:"{{count}} semaines",month:"1 mois",months:"{{count}} mois",year:"1 an",maintenanceTypes:"Types de maintenance",maintenanceTypesDescription:"Types système et tâches personnalisées",addCustomType:"Ajouter un type",restoreDefaults:"Restaurer les tâches par défaut",intervalType:"Type d'intervalle",intervalValue:"Intervalle ({{type}})",icon:"Icône",documentationLink:"Lien documentation (optionnel)",assignToPrinters:"Assigner aux imprimantes",selectAtLeastOnePrinter:"Sélectionnez au moins une imprimante",addType:"Ajouter le type",custom:"Personnalisé",printHours:"Heures d'impression",calendarDays:"Jours calendaires",exampleName:"ex: Remplacement filtre HEPA",viewDocumentation:"Voir documentation",timeBasedInterval:"Intervalle temporel",intervalOverrides:"Exceptions d'intervalle",intervalOverridesDescription:"Intervalles spécifiques par imprimante",assignedToPrinters:"Assigné aux imprimantes :",noPrintersAssigned:"Aucune imprimante assignée",addPrinterShort:"Ajouter :",printersAssignedClick:"{{count}} imprimante(s) assignée(s) - gérer",removeFromPrinter:"Retirer de cette imprimante",types:{lubricateCarbonRods:"Lubrifier les tiges carbone",lubricateRails:"Lubrifier les rails linéaires",cleanNozzle:"Nettoyer la buse / hotend",checkBelts:"Vérifier la tension des courroies",cleanBuildPlate:"Nettoyer le plateau",checkExtruder:"Vérifier les engrenages de l'extrudeur",checkCooling:"Vérifier les ventilateurs",generalInspection:"Inspection générale",cleanCarbonRods:"Nettoyer les tiges carbone",lubricateSteelRods:"Lubrifier les tiges en acier",cleanSteelRods:"Nettoyer les tiges en acier",cleanLinearRails:"Nettoyer les rails linéaires",checkPtfeTube:"Vérifier le tube PTFE",replaceHepaFilter:"Remplacer le filtre HEPA",replaceCarbonFilter:"Remplacer le filtre charbon",lubricateLeftNozzleRail:"Lubrifier le rail de buse gauche"},maintenanceComplete:"Maintenance marquée comme faite",typeUpdated:"Type mis à jour",typeDeleted:"Type supprimé",defaultsRestored:"{{count}} tâche(s) par défaut restaurée(s)",printHoursUpdated:"Heures mises à jour",printerAssigned:"Imprimante assignée",printerRemoved:"Imprimante retirée",deleteTypeConfirm:'Supprimer "{{name}}" ?',deleteSystemTypeTitle:"Supprimer la tâche de maintenance par défaut ?",deleteSystemTypeMessage:'Êtes-vous sûr de vouloir supprimer la tâche de maintenance par défaut "{{name}}" ?',noPermissionUpdate:"Pas d'autorisation de mise à jour",noPermissionPerform:"Pas d'autorisation d'action",noPermissionEditTypes:"Pas d'autorisation de modification types",noPermissionDeleteTypes:"Pas d'autorisation de suppression types",noPermissionEditHours:"Pas d'autorisation de modification heures",noPermissionRemovePrinter:"Pas d'autorisation retrait imprimante",noPermissionAssignPrinter:"Pas d'autorisation assignation",noPermissionEditIntervals:"Pas d'autorisation modification intervalles",configureSettings:"Configurer types et intervalles"},settings:{title:"Paramètres",general:"Général",tabs:{general:"Général",smartPlugs:"Prises connectées",notifications:"Notifications",queue:"Flux de travail",filament:"Filament",network:"Réseau",apiKeys:"Clés API",virtualPrinter:"Imprimante virtuelle",failureDetection:"Détection d'échec",users:"Authentification",backup:"Sauvegarde",emailAuth:"Authentification Email",ldap:"LDAP",twoFa:"Authentification 2FA",oidc:"SSO / OIDC",security:"Sécurité",spoolbuddy:"SpoolBuddy"},ldap:{title:"Authentification LDAP",enabledDesc:"L'authentification LDAP est activée",disabledDesc:"L'authentification LDAP est désactivée",disabledHint:"Configurez et enregistrez les paramètres LDAP ci-dessous, puis activez.",enabled:"Authentification LDAP activée",disabled:"Authentification LDAP désactivée",feature1:"Les utilisateurs peuvent se connecter avec leurs identifiants LDAP",feature2:"Le compte administrateur local reste disponible en secours",feature3:"Les groupes LDAP sont associés aux groupes BamBuddy à la connexion",serverConfig:"Configuration du serveur LDAP",serverUrl:"URL du serveur",serverUrlHint:"Utilisez ldap:// pour standard ou ldaps:// pour les connexions SSL",security:"Sécurité",securityHint:"StartTLS met à niveau une connexion simple vers TLS. LDAPS utilise TLS dès le début.",bindDn:"DN de liaison (compte de service)",bindPassword:"Mot de passe de liaison",searchBase:"DN de base de recherche",userFilter:"Filtre de recherche utilisateur",userFilterHint:"{username} est remplacé par le nom d'utilisateur. Utilisez (uid={username}) pour OpenLDAP.",advanced:"Avancé",autoProvision:"Provisionnement automatique",autoProvisionHint:"Créer automatiquement un compte BamBuddy lors de la première connexion LDAP",defaultGroup:"Groupe par défaut",defaultGroupNone:"— Aucun (pas de repli) —",defaultGroupHint:"Groupe de repli attribué lorsqu'un utilisateur LDAP s'authentifie mais n'est dans aucun groupe LDAP mappé. Laissez vide pour laisser les utilisateurs non mappés sans autorisations.",groupMapping:"Mappage de groupes (JSON)",groupMappingHint:"Associer les DN de groupes LDAP aux groupes BamBuddy. Groupes disponibles : ",testConnection:"Tester la connexion",settingsSaved:"Paramètres LDAP enregistrés",errors:{serverRequired:"L'URL du serveur LDAP est requise",searchBaseRequired:"Le DN de base de recherche est requis",enableAuthFirst:"Activez d'abord l'authentification",configureLdapFirst:"Enregistrez d'abord les paramètres LDAP"}},email:{smtpSettings:"Configuration SMTP",smtpHost:"Serveur SMTP",smtpPort:"Port SMTP",security:"Sécurité",authentication:"Authentification",username:"Utilisateur",password:"Mot de passe",fromEmail:"Email expéditeur",fromName:"Nom expéditeur",testConnection:"Tester la connexion SMTP",testRecipient:"Email test destinataire",sendTest:"Envoyer email test",sending:"Envoi...",save:"Enregistrer les paramètres",saving:"Enregistrement...",advancedAuth:"Authentification avancée",advancedAuthEnabled:"L'authentification avancée est activée",advancedAuthEnabledDesc:"La gestion des utilisateurs par email est active. Les nouveaux utilisateurs recevront un mot de passe auto-généré.",advancedAuthDisabled:"Authentification avancée désactivée",advancedAuthDisabledDesc:"Activez pour les fonctionnalités liées à l'email (mot de passe oublié, etc).",enable:"Activer",disable:"Désactiver",feature1:"Génération auto et envoi de mots de passe par email",feature2:"Connexion par utilisateur ou email",feature3:"Réinitialisation mot de passe oublié disponible",feature4:"Réinitialisation admin par email",errors:{requiredFields:"Remplissez tous les champs requis",usernameRequired:"L'utilisateur est requis pour l'authentification",enterTestEmail:"Entrez une adresse email de test",smtpServerAndEmail:"Serveur et expéditeur requis pour le test",usernamePasswordRequired:"Utilisateur et mot de passe requis pour l'auth",configureSmtpFirst:"Configurez et testez le SMTP d'abord",enableAuthFirst:"Veuillez d'abord activer l'authentification pour utiliser les fonctionnalités basées sur le courrier électronique."},success:{settingsSaved:"Paramètres SMTP enregistrés"},securityOptions:{starttls:"STARTTLS (Port 587)",ssl:"SSL/TLS (Port 465)",none:"Aucun (Port 25)"},authOptions:{enabled:"Activée",disabled:"Désactivée"}},appearance:"Apparence",notifications:"Notifications",smartPlugs:"Prises connectées",spoolman:"Spoolman",updates:"Mises à jour",language:"Langue",languageDescription:"Choisissez votre langue",theme:"Thème",themeLight:"Clair",themeDark:"Sombre",themeSystem:"Système",defaultView:"Vue par défaut",defaultViewDescription:"Page affichée au démarrage",checkForUpdates:"Vérifier les mises à jour",autoUpdate:"Mise à jour auto",currentVersion:"Version actuelle",latestVersion:"Dernière version",upToDate:"Bambuddy est à jour",updateAvailable:"Mise à jour disponible",notificationLanguage:"Langue des notifications",notificationLanguageDescription:"Langue pour les notifications push",bedCooledThreshold:"Seuil de refroidissement du plateau",bedCooledThresholdDescription:"Température en dessous de laquelle le plateau est considéré comme refroidi",userNotificationsEnabled:"Notifications utilisateur",userNotificationsEnabledDescription:"Active le menu de notifications utilisateur et les notifications par e-mail pour les événements d'impression. Nécessite l'authentification avancée.",userNotificationsDisabledHint:"Activez l'authentification avancée pour utiliser les notifications utilisateur.",notificationProviders:"Fournisseurs de notifications",addProvider:"Ajouter un fournisseur",editProvider:"Modifier le fournisseur",providerType:"Type de fournisseur",testNotification:"Tester la notification",testSuccess:"Notification de test envoyée",testFailed:"Échec de l'envoi du test",quietHours:"Heures de silence",quietHoursDescription:"Ne pas déranger pendant ces heures",quietHoursStart:"Début",quietHoursEnd:"Fin",events:{title:"Événements de notification",printStart:"Impression démarrée",printComplete:"Impression terminée",printFailed:"Impression échouée",printStopped:"Impression arrêtée",printProgress:"Jalons de progression",printProgressDescription:"Notifier à 25%, 50%, 75%",printerOffline:"Imprimante hors ligne",printerError:"Erreur imprimante",filamentLow:"Filament bas",maintenanceDue:"Maintenance due",maintenanceDueDescription:"Notifier quand une tâche est due"},smartPlug:{title:"Prises connectées",add:"Ajouter une prise",edit:"Modifier la prise",name:"Nom",ipAddress:"Adresse IP",linkedPrinter:"Imprimante liée",autoOn:"Allumage auto",autoOnDescription:"Allumer au début de l'impression",autoOff:"Extinction auto",autoOffDescription:"Éteindre après l'impression",offDelay:"Délai d'extinction",offDelayMinutes:"Minutes après fin",offDelayTemp:"Quand la buse est sous",currentState:"État actuel",turnOn:"Allumer",turnOff:"Éteindre"},filamentTracking:"Suivi de Filament",filamentTrackingDesc:"Choisissez comment suivre vos bobines. Utilisez l'inventaire intégré ou connectez un serveur Spoolman.",filamentChecks:"Vérifications du filament",disableFilamentWarnings:"Désactiver les avertissements de filament",disableFilamentWarningsDesc:"Ne pas afficher les avertissements de filament insuffisant lors de l'impression ou de la mise en file d'attente",preferLowestFilament:"Préférer le filament le plus bas",preferLowestFilamentDesc:"Lorsque plusieurs bobines correspondent, utiliser celle avec le moins de filament restant",trackingModeBuiltIn:"Inventaire Intégré",trackingModeBuiltInDesc:"Correspondance RFID et suivi de consommation inclus",trackingModeSpoolmanDesc:"Serveur de gestion externe",builtInFeatureRfid:"Détecte auto les bobines RFID Bambu Lab dans l'AMS",builtInFeatureUsage:"Suit la consommation par impression",builtInFeatureCatalog:"Gère bobines, couleurs et profils facteur K",builtInFeatureThirdParty:"Les bobines tierces peuvent être assignées aux bobines d'inventaire",amsSyncButton:"Synchroniser les poids depuis l'AMS",amsSyncTitle:"Synchroniser les poids des bobines depuis l'AMS",amsSyncMessage:"Tous les poids des bobines de l'inventaire seront écrasés par les valeurs actuelles de l'AMS des imprimantes connectées. Utilisez ceci pour récupérer des données de poids corrompues. Les imprimantes doivent être en ligne.",amsSyncing:"Synchronisation...",amsSyncSuccess:"{{synced}} bobine(s) synchronisée(s), {{skipped}} ignorée(s)",amsSyncError:"Échec de la synchronisation des poids depuis l'AMS",spoolmanAmsSyncButton:"Synchroniser les poids Spoolman depuis l'AMS",spoolmanAmsSyncTitle:"Synchroniser les poids des bobines Spoolman depuis l'AMS",spoolmanAmsSyncMessage:"Cela mettra à jour les poids des bobines Spoolman en fonction des valeurs de remplissage AMS actuelles des imprimantes connectées. Les imprimantes doivent être en ligne.",spoolmanAmsSyncing:"Synchronisation...",spoolmanAmsSyncSuccess:"{{synced}} bobine(s) synchronisée(s), {{skipped}} ignorée(s)",spoolmanAmsSyncError:"Échec de la synchronisation des poids Spoolman depuis l'AMS",spoolmanAmsSyncErrorUnreachable:"Échec de la synchronisation (Spoolman inaccessible)",spoolmanAmsSyncErrorNotConfigured:"Échec de la synchronisation (Spoolman non configuré)",spoolmanNotConfigured:"Spoolman non configuré",spoolmanFilamentCatalogTitle:"Catalogue de filaments Spoolman",spoolmanFilamentCatalogDesc:"Noms de filaments et poids à vide depuis votre instance Spoolman. Le nom et le poids bobine sont modifiables ici ; toutes les autres propriétés sont gérées directement dans Spoolman.",spoolmanUrl:"URL Spoolman",spoolmanUrlHint:"URL de votre serveur Spoolman (ex: http://localhost:7912)",spoolmanConnected:"Connecté",spoolmanDisconnected:"Déconnecté",status:"Statut",connect:"Connecter",disconnect:"Déconnecter",howSyncWorks:"Fonctionnement de la Sync",syncInfoRfidOnly:"Seules les bobines officielles RFID sont synchronisées",syncInfoAutoCreate:"Les bobines sont créées dans Spoolman à la 1ère sync",syncInfoThirdPartySkipped:"Les bobines tierces ou rechargées sont ignorées",linkingExistingSpools:"Lier des bobines existantes",linkingExistingSpoolsDesc:'Pour lier une bobine Spoolman, survolez un slot AMS et cliquez sur "Lier à Spoolman".',syncMode:"Mode de Sync",syncModeAuto:"Automatique",syncModeManual:"Manuel uniquement",syncModeAutoDesc:"Sync auto lors de changements AMS",syncModeManualDesc:"Sync uniquement sur déclenchement manuel",syncAmsData:"Synchroniser AMS",syncAmsDataDesc:"Synchroniser manuellement les données vers Spoolman",allPrinters:"Toutes les imprimantes",noDefaultPrinter:"Aucune par défaut (demander à chaque fois)",sidebarOrder:"Ordre de la barre latérale",saveThumbnails:"Enregistrer les vignettes",captureFinishPhoto:"Prendre une photo à la fin",noPrintersConfigured:"Aucune imprimante configurée",archiveMode:{always:"Toujours créer une archive",never:"Ne jamais créer d'archive",ask:"Demander à chaque fois"},checkForUpdatesLabel:"Vérifier les mises à jour",checkPrinterFirmware:"Vérifier le firmware imprimante",includeBetaUpdates:"Inclure les versions bêta",includeBetaUpdatesDesc:"Notifier des versions bêta et préliminaires lors de la vérification des mises à jour",enableRetry:"Activer la rétentative",homeAssistantDescription:"Contrôler les prises via Home Assistant",environmentManagedLabel:"(Géré par l'environnement)",autoEnabledViaEnv:"Activé via variables d'environnement",urlFromEnvReadOnly:"Valeur HA_URL (lecture seule)",tokenFromEnvReadOnly:"Valeur HA_TOKEN (lecture seule)",mqttConnectedTo:"Connecté à",prometheusDescription:"Exposer les données au format Prometheus",noSmartPlugsTitle:"Aucune prise configurée",noSmartPlugsDescription:"Ajoutez une prise Tasmota pour suivre l'énergie et automatiser.",noProvidersTitle:"Aucun fournisseur configuré",noProvidersDescription:"Ajoutez un fournisseur pour recevoir des alertes.",noTemplatesAvailable:"Aucun modèle dispo. Redémarrez pour les générer.",apiPermissionView:"Voir statut et file",apiPermissionEdit:"Gérer la file d'attente",apiKeysEmptyTitle:"Aucune clé API",apiKeysEmptyDescription:"Créez une clé pour vos intégrations.",noUsersFound:"Aucun utilisateur trouvé",noGroupsFound:"Aucun groupe trouvé",noGroupsAvailable:"Aucun groupe disponible",passwordsDoNotMatch:"Les mots de passe ne correspondent pas",systemGroupWarning:"Les noms des groupes système sont fixes",authDisabledTitle:"Authentification désactivée",authDisabledFeature1:"Requis pour accéder au système",authDisabledFeature2:"Gestion multi-utilisateurs et groupes",authDisabledFeature3:"Plus de 50 permissions granulaires",userHasCreated:"Cet utilisateur a créé :",userItemsQuestion:"Que faire de ces éléments ?",deleteUserConfirm:"Supprimer cet utilisateur ?",actionCannotBeUndone:"Cette action est irréversible.",addFirstSmartPlug:"Ajoutez votre première prise",providers:"Fournisseurs",log:"Journal",testAll:"Tout tester",testResults:"Résultats du test",testPassedCount:"{{count}} succès",testFailedCount:"{{count}} échecs",messageTemplates:"Modèles de message",messageTemplatesDescription:"Personnalisez les messages par événement.",apiKeys:"Clés API",apiKeysDescription:"Créez des clés pour webhooks et API.",createKey:"Créer une clé",apiKeyCreated:"Clé API créée avec succès",apiKeyCopyWarning:"Copiez cette clé maintenant - elle ne sera plus affichée !",useInApiBrowser:"Utiliser dans l'explorateur API",createNewApiKey:"Nouvelle clé API",keyName:"Nom de la clé",keyNamePlaceholder:"ex: Home Assistant, OctoPrint",readStatus:"Lire le statut",readStatusDescription:"Voir les imprimantes et la file",manageQueue:"Gérer la file",manageQueueDescription:"Ajouter/retirer des éléments",controlPrinter:"Contrôler l'imprimante",controlPrinterDescription:"Pause, reprise, arrêt",manageLibrary:"Gérer la bibliothèque",manageLibraryDescription:"Téléverser, renommer et supprimer des fichiers de la bibliothèque ; importer des modèles depuis MakerWorld",manageInventory:"Gérer l'inventaire",manageInventoryDescription:"Créer, modifier et supprimer des bobines et des entrées d'inventaire. Requis pour les bornes SpoolBuddy (scan NFC, lectures de balance, commandes système de la borne).",libraryBadge:"Bibliothèque",inventoryBadge:"Inventaire",cloudAccess:"Autoriser l'accès cloud",cloudAccessDescription:"Lit les préréglages et filaments Bambu Cloud en votre nom. Nécessite d'être connecté à Bambu Cloud.",cloudBadge:"Cloud",updateEnergyCost:"Mettre à jour le tarif électrique",updateEnergyCostDescription:"Autoriser cette clé à POSTer un nouveau tarif électrique par kWh sur /settings/electricity-price. Utile pour les automatisations Home Assistant à tarif dynamique (Tibber, Octopus, etc.). Il s'agit du seul champ de paramètres modifiable via clé API.",energyCostBadge:"Énergie",legacyKey:"Hérité",legacyKeyTooltip:"Créé avant la propriété par utilisateur ; recréez pour l'accès cloud",unnamedKey:"Clé sans nom",lastUsed:"Dernière utilisation",read:"Lecture",control:"Contrôle",createFirstKey:"Créez votre première clé",webhookEndpoints:"Points de terminaison Webhook",webhookApiKeyHint:"Utilisez la clé dans l'en-tête X-API-Key.",webhook:{getAllStatus:"Tous les statuts",getSpecificStatus:"Statut spécifique",addToQueue:"Ajouter à la file",pausePrint:"Pause",resumePrint:"Reprise",stopPrint:"Arrêt"},apiBrowser:"Explorateur API",apiBrowserDescription:"Testez les endpoints API.",apiKeyForTesting:"Clé API pour test",apiKeyPlaceholder:"Collez votre clé pour tester...",apiKeyHint:"Sera envoyée via l'en-tête X-API-Key.",deleteApiKeyTitle:"Supprimer la clé API",deleteApiKeyMessage:"Les intégrations utilisant cette clé cesseront de fonctionner.",deleteKey:"Supprimer la clé",amsDisplayThresholds:"Seuils d'affichage AMS",amsThresholdsDescription:"Seuils de couleur pour humidité et température.",humidity:"Humidité",goodGreen:"Bon (vert)",fairOrange:"Moyen (orange)",aboveFairBad:"Au-dessus = rouge (mauvais)",fairAlsoDryingThreshold:"Ce seuil est aussi utilisé pour déclencher le séchage automatique",temperature:"Température",goodBlue:"Bon (bleu)",aboveFairHot:"Au-dessus = rouge (chaud)",historyRetention:"Rétention d'historique",keepSensorHistory:"Garder l'historique pendant",historyRetentionDescription:"Les anciennes données seront supprimées.",defaultPrintOptions:"Options d'impression par défaut",defaultPrintOptionsDescription:"Définir les valeurs par défaut des options d'impression. Modifiables dans la boîte de dialogue d'impression.",defaultBedLevelling:"Nivellement du lit",defaultBedLevellingDesc:"Niveler automatiquement le lit avant l'impression",defaultFlowCali:"Calibration du flux",defaultFlowCaliDesc:"Calibrer le flux d'extrusion",defaultVibrationCali:"Calibration des vibrations",defaultVibrationCaliDesc:"Réduire les artefacts de ringing",defaultLayerInspect:"Inspection première couche",defaultLayerInspectDesc:"Inspection IA de la première couche",defaultTimelapse:"Time-lapse",defaultTimelapseDesc:"Enregistrer une vidéo timelapse",staggeredStart:"Démarrage échelonné",staggeredStartDescription:"Taille de groupe et intervalle par défaut lors de l'échelonnement des démarrages de lots multi-imprimantes. Modifiable par lot dans la fenêtre d'impression.",plateClear:"Confirmation de plateau libre",requirePlateClear:"Exiger la confirmation de plateau libre",requirePlateClearDescription:"Lorsque cette option est activée, le planificateur attend une confirmation de plateau libre par imprimante avant de lancer les impressions en file d'attente sur les imprimantes ayant terminé. La désactiver masque également le badge d'état du plateau et le bouton « Marquer le plateau comme dégagé » sur les cartes d'imprimante.",gcodeInjection:"Injection de G-code",gcodeInjectionDescription:"Configurez du G-code personnalisé à injecter au début et/ou à la fin des impressions pour les systèmes d'auto-impression comme Farmloop, SwapMod, AutoClear et Printflow 3D. Les snippets sont configurés par modèle d'imprimante et appliqués lorsque « Injecter le G-code » est activé sur un élément de file d'attente.",gcodeInjectionNoPrinters:"Aucune imprimante trouvée. Ajoutez des imprimantes pour configurer les snippets G-code.",gcodeStartLabel:"G-code de début",gcodeEndLabel:"G-code de fin",gcodeStartPlaceholder:"G-code ajouté avant le début de l'impression...",gcodeEndPlaceholder:"G-code ajouté après la fin de l'impression...",staggerGroupSize:"Taille du groupe",staggerGroupSizeHelp:"Imprimantes à démarrer simultanément par groupe",staggerInterval:"Intervalle (minutes)",staggerIntervalHelp:"Délai entre chaque démarrage de groupe",queueDrying:"Séchage automatique",queueDryingDescription:"Sécher automatiquement le filament AMS lorsque l'imprimante est inactive entre les impressions. Utilise le seuil d'humidité ci-dessus.",queueDryingEnabled:"Activer le séchage automatique",queueDryingEnabledDescription:"Démarrer le séchage AMS automatiquement lorsque l'imprimante est inactive et l'humidité dépasse le seuil",queueDryingBlock:"Attendre la fin du séchage",queueDryingBlockDescription:"Bloquer la file d'attente jusqu'à la fin du séchage. Désactivé, les impressions sont prioritaires.",ambientDryingEnabled:"Séchage ambiant",ambientDryingEnabledDescription:"Sécher automatiquement le filament sur les imprimantes inactives lorsque l'humidité dépasse le seuil, même sans impressions en file.",dryingPresets:"Préréglages de séchage",dryingPresetsDescription:"Température et durée par type de filament. AMS 2 Pro utilise des températures plus basses, AMS-HT supporte des températures plus élevées.",dryingFilament:"Filament",printModal:"Fenêtre d'impression",expandCustomMapping:"Étendre le mapping personnalisé par défaut",expandCustomMappingDescription:"Affiche le mapping AMS par imprimante étendu.",authentication:"Authentification",authEnabledDescription:"L'instance est sécurisée",authDisabledDescription:"Activez pour restreindre l'accès",authDisabledMessage:"Activez l'authentification pour gérer comptes et permissions.",enableAuthentication:"Activer l'authentification",currentUser:"Utilisateur actuel",changePassword:"Changer le mot de passe",admin:"Administrateur",users:"Utilisateurs",addUser:"Ajouter un utilisateur",groups:"Groupes",addGroup:"Ajouter un groupe",system:"Système",noDescription:"Pas de description",userCount:"{{count}} utilisateurs",permissionCount:"{{count}} permissions",createUser:"Créer un utilisateur",username:"Nom d'utilisateur",enterUsername:"Entrez l'utilisateur",password:"Mot de passe",enterPassword:"Entrez le mot de passe",passwordRequirements:"Au moins 8 caractères, avec une majuscule, une minuscule, un chiffre et un caractère spécial.",confirmPassword:"Confirmer le mot de passe",confirmPasswordPlaceholder:"Confirmez le mot de passe",viewReleaseOnGitHub:"Voir la version sur GitHub",turnAllPlugsOn:"Tout allumer",turnAllPlugsOff:"Tout éteindre",clearNotificationLogs:"Effacer les journaux",clearLogsMessage:"Efface définitivement les logs de plus de 30 jours.",clearLogs:"Effacer les logs",resetUiPreferences:"Réinitialiser l'UI",resetUiPreferencesMessage:"Réinitialise l'ordre, thème, widgets, etc. N'affecte pas vos données.",resetPreferences:"Réinitialiser",deleteGroupTitle:"Supprimer le groupe",deleteGroupMessage:"Les utilisateurs de ce groupe perdront ces permissions.",deleteGroup:"Supprimer le groupe",disableAuthenticationTitle:"Désactiver l'authentification",disableAuthenticationMessage:"Instance accessible sans connexion. Les comptes sont conservés.",disableAuthentication:"Désactiver",configureBambuddy:"Configurer Bambuddy",systemDefault:"Défaut système",archiveSettings:"Réglages Archives",newWindow:"Nouvelle fenêtre",embeddedOverlay:"Superposition intégrée",preferredSlicer:"Slicer préféré",preferredSlicerDescription:"Application pour ouvrir les fichiers",orcaslicerKnownIssuesWarning:"OrcaSlicer 2.3.2 / 2.4.0-dev ont des bugs CLI connus qui bloquent le découpage de nombreux 3MF créés par Bambu — voir les issues amont #12426 (segfault sur fichiers multi-extrudeurs peints) et #13386 (rejet de validation stricte des plages de paramètres). Bambu Studio est recommandé jusqu'à ce que les correctifs amont arrivent.",useSlicerApi:"Utiliser l'API Slicer",useSlicerApiDescription:'Lorsque activé, les actions "Slice" ouvrent le slicer intégré et appellent le sidecar slicer-API. Lorsque désactivé (par défaut), elles redirigent vers le slicer desktop via le schéma URI.',slicerCard:"Slicer",orcaslicerApiUrl:"OrcaSlicer sidecar URL",bambuStudioApiUrl:"Bambu Studio sidecar URL",slicerApiUrlDescription:"URL du conteneur sidecar slicer-API. Laisser vide pour utiliser les variables d'environnement SLICER_API_URL / BAMBU_STUDIO_API_URL.",slicerBundles:{title:"Bundles de slicer",description:'Importez un Printer Preset Bundle (.bbscfg) exporté depuis BambuStudio (Fichier → Exporter → Exporter le bundle de préréglages → "Printer preset bundle"). Une fois importé, les requêtes de découpage peuvent sélectionner les préréglages du bundle par nom sans re-téléverser le triplet de profils JSON.',uploadButton:"Téléverser le bundle",uploading:"Téléversement…",loading:"Chargement des bundles…",empty:"Aucun bundle importé pour le moment.",summary:"{{processCount}} processus · {{filamentCount}} préréglages de filament",delete:"Supprimer",uploadSuccess:"{{name}} importé",uploadError:"Échec du téléversement du bundle : {{message}}",deleteSuccess:"Bundle supprimé",deleteError:"Échec de la suppression du bundle : {{message}}",confirmDeleteTitle:"Supprimer ce bundle ?",confirmDeleteMessage:`Les requêtes de découpage référençant "{{name}}" échoueront jusqu'à la réimportation du bundle.`},externalCameras:"Caméras externes",costTracking:"Suivi des coûts",printsOnly:"Impressions uniquement",totalConsumption:"Consommation totale",dataManagement:"Gestion des données",storageUsage:"Utilisation du stockage",storageUsageDescription:"Répartition de l'utilisation des données par catégorie",storageUsageTotal:"Total",storageUsageErrors:"Erreurs",storageUsageOtherBreakdown:"Autre (inclut ressources statiques, scripts et fichiers de configuration)",storageUsageSystem:"Système",storageUsageData:"Données",storageUsageUnavailable:"Informations d'utilisation du stockage non disponibles",clearNotificationLogsDescription:"Supprimer logs de plus de 30 jours",resetUiPreferencesDescription:"Réinitialise thèmes et affichage sans toucher aux données.",enableHomeAssistant:"Activer Home Assistant",enableMqtt:"Activer MQTT",useTls:"Utiliser TLS",enableMetricsEndpoint:"Activer l'endpoint Metrics",availableMetrics:"Metrics disponibles",editUser:"Modifier l'utilisateur",deleteUserTitle:"Supprimer l'utilisateur",groupName:"Nom du groupe",leaveEmptyForAnonymous:"Vide pour anonyme",leaveEmptyForNoAuth:"Vide si pas d'auth",enterNewPassword:"Nouveau mot de passe",confirmNewPassword:"Confirmer nouveau mdp",enterGroupName:"Entrez le nom du groupe",enterDescriptionOptional:"Description (optionnel)",enterCurrentPassword:"Mdp actuel",enterNewPasswordMin6:"Nouveau mdp (min 6 char)",toast:{keyCopied:"Clé copiée",copyFailed:"Échec copie",keyAddedToBrowser:"Clé ajoutée à l'explorateur",clearLogsFailed:"Échec effacement logs",uiPreferencesReset:"Préférences UI réinitialisées. Rafraîchissement...",authDisabled:"Authentification désactivée",authDisableFailed:"Échec désactivation",apiKeyCreated:"Clé API créée",apiKeyDeleted:"Clé API supprimée",userCreated:"Utilisateur créé",userUpdated:"Utilisateur mis à jour",userDeleted:"Utilisateur supprimé",groupCreated:"Groupe créé",groupUpdated:"Groupe mis à jour",groupDeleted:"Groupe supprimé",fillRequiredFields:"Remplissez les champs requis",passwordsDoNotMatch:"Les mots de passe ne correspondent pas",passwordTooShort:"Le mot de passe doit contenir au moins 8 caractères",passwordNeedsUppercase:"Le mot de passe doit contenir au moins une majuscule",passwordNeedsLowercase:"Le mot de passe doit contenir au moins une minuscule",passwordNeedsDigit:"Le mot de passe doit contenir au moins un chiffre",passwordNeedsSpecial:"Le mot de passe doit contenir au moins un caractère spécial",enterGroupName:"Entrez un nom de groupe",settingsSaved:"Paramètres enregistrés",noPermissionUpdate:"Vous n'avez pas l'autorisation de modifier les paramètres",cameraSettingsSaved:"Réglages caméra enregistrés",enterCameraUrl:"Entrez une URL caméra",passwordChanged:"Mot de passe modifié",connectionFailed:"Échec connexion",testFailed:"Échec test",cameraConnected:"Caméra connectée {{resolution}}"},testConnection:"Tester la connexion",catalog:{spoolCatalog:"Catalogue de Bobines",spoolCatalogDescription:"Poids des bobines vides par marque/type. Utilisé pour le calcul auto du poids restant.",searchCatalog:"Chercher dans le catalogue...",addNewEntry:"Nouvelle Entrée",namePlaceholder:"Nom (ex: Bambu Lab - Plastique)",weight:"Poids",type:"Type",default:"Défaut",custom:"Perso",noMatch:"Aucune entrée correspondante",empty:"Catalogue vide",deleteEntry:"Supprimer l'entrée",deleteConfirm:'Supprimer "{{name}}" ?',resetCatalog:"Réinitialiser le catalogue",resetConfirm:"Réinitialiser aux valeurs par défaut ? Vos entrées personnalisées seront supprimées.",loadFailed:"Échec chargement catalogue",nameWeightRequired:"Nom et poids requis",entryAdded:"Entrée ajoutée",addFailed:"Échec ajout",entryUpdated:"Entrée mise à jour",updateFailed:"Échec mise à jour",entryDeleted:"Entrée supprimée",deleteFailed:"Échec suppression",resetSuccess:"Catalogue réinitialisé",resetFailed:"Échec réinitialisation",exported:"{{count}} entrées exportées",imported:"{{added}} entrées importées ({{skipped}} ignorées)",importFailed:"Échec import : format JSON invalide",exportTooltip:"Exporter en JSON",importTooltip:"Importer depuis JSON",resetTooltip:"Réinitialiser par défaut",selectedCount:"{{count}} sélectionnés",deleteSelected:"Supprimer la sélection",bulkDeleteConfirm:"Supprimer {{count}} entrées ?",bulkDeleted:"{{count}} entrées supprimées",bulkDeleteFailed:"Échec de la suppression",material:"Matériau",spoolWeight:"Poids bobine",color:"Couleur",updateSpoolWeight:"Mettre à jour le poids bobine",filamentUpdated:"Filament mis à jour",filamentUpdateFailed:"Échec de la mise à jour du filament",filamentUpdateInvalid:"Données de filament invalides",keepExistingSpoolWeight:"Conserver l'ancien poids pour les bobines existantes",keepExistingSpoolWeightDesc:"Les bobines déjà créées avec ce type de filament conservent l'ancien poids à vide. Les nouvelles bobines utilisent la valeur mise à jour.",applyToAllSpools:"Appliquer à toutes les bobines",applyToAllSpoolsDesc:"Tous les calculs de poids pour ce type de filament utilisent immédiatement le nouveau poids à vide."},colorCatalog:{title:"Catalogue de Couleurs",description:"Couleurs de filament par fabricant. Utilisé pour la recherche auto lors de l'ajout de bobines.",searchColors:"Chercher couleurs...",allManufacturers:"Tous les fabricants",addNewColor:"Nouvelle Couleur",manufacturer:"Fabricant",colorName:"Nom couleur",hex:"Hex",materialOptional:"Matériau (optionnel)",showing:"Affichage {{filtered}} sur {{total}} couleurs",noMatch:"Aucune couleur correspondante",empty:"Catalogue vide",deleteColor:"Supprimer couleur",deleteConfirm:'Supprimer "{{name}}" ?',resetCatalog:"Réinitialiser catalogue couleurs",resetConfirm:"Réinitialiser aux valeurs par défaut ?",sync:"Synchro.",starting:"Démarrage...",syncTooltip:"Sync depuis FilamentColors.xyz (2000+ couleurs, peut être long)",loadFailed:"Échec chargement catalogue couleurs",fieldsRequired:"Fabricant, nom et code Hex requis",colorAdded:"Couleur ajoutée",addFailed:"Échec ajout",colorUpdated:"Couleur mise à jour",updateFailed:"Échec mise à jour",colorDeleted:"Couleur supprimée",deleteFailed:"Échec suppression",resetSuccess:"Catalogue réinitialisé",resetFailed:"Échec réinitialisation",syncUpToDate:"Déjà à jour ({{count}} couleurs vérifiées)",syncComplete:"{{added}} couleurs ajoutées ({{skipped}} déjà présentes)",syncError:"Erreur de sync",syncFailed:"Échec sync FilamentColors.xyz",exported:"{{count}} couleurs exportées",imported:"{{added}} couleurs importées ({{skipped}} ignorées)",importFailed:"Échec import : format JSON invalide",selectedCount:"{{count}} sélectionnés",deleteSelected:"Supprimer la sélection",bulkDeleteConfirm:"Supprimer {{count}} couleurs ?",bulkDeleted:"{{count}} couleurs supprimées",bulkDeleteFailed:"Échec de la suppression des couleurs"},dateFormat:"Format de date",dateFormatUs:"US (MM/JJ/AAAA)",dateFormatEu:"EU (JJ/MM/AAAA)",dateFormatIso:"ISO (AAAA-MM-JJ)",timeFormat:"Format horaire",timeFormat12:"12 heures (3:30 PM)",timeFormat24:"24 heures (15:30)",defaultPrinter:"Imprimante par défaut",defaultPrinterDescription:"Présélectionner cette imprimante pour les téléversements, réimpressions et autres opérations.",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"Glissez les éléments dans la barre latérale pour réorganiser. Réinitialiser l'ordre par défaut ici.",setDefault:"Définir par défaut",sidebarOrderSetDefaultHint:"Définir par défaut applique l'ordre actuel du menu aux utilisateurs qui n'ont pas encore personnalisé le leur.",sidebarDefaultSet:"L'ordre du menu par défaut a été défini.",sidebarDefaultCleared:"Ordre du menu par défaut effacé.",sidebarDefaultFailed:"Échec de la définition de l'ordre du menu par défaut.",reset:"Réinitialiser",darkMode:"Mode sombre",lightMode:"Mode clair",active:"(actif)",background:"Arrière-plan",accent:"Accent",style:"Style",bgNeutral:"Neutre",bgWarm:"Chaud",bgCool:"Froid",bgOled:"OLED Noir",bgSlate:"Bleu ardoise",bgForest:"Vert forêt",accentGreen:"Vert",accentTeal:"Sarcelle",accentBlue:"Bleu",accentOrange:"Orange",accentPurple:"Violet",accentRed:"Rouge",styleClassic:"Classique",styleGlow:"Lumineux",styleVibrant:"Vif",themeToggleHint:"Basculer entre le mode sombre, clair et système avec l'icône dans la barre latérale.",autoArchivePrints:"Archiver automatiquement les impressions",autoArchiveDescription:"Sauvegarder automatiquement les fichiers 3MF à la fin des impressions",saveThumbnailsDescription:"Extraire et sauvegarder les images d'aperçu des fichiers 3MF",captureFinishPhotoDescription:"Prendre une photo avec la caméra de l'imprimante à la fin de l'impression",ffmpegNotInstalled:"ffmpeg non installé",ffmpegRequired:"La capture caméra nécessite ffmpeg. Installez-le via <brew>brew install ffmpeg</brew> (macOS) ou <apt>apt install ffmpeg</apt> (Linux).",camera:"Caméra",cameraViewMode:"Mode d'affichage caméra",cameraOverlayDescription:"La caméra s'ouvre dans un overlay redimensionnable sur l'écran principal",cameraWindowDescription:"La caméra s'ouvre dans une fenêtre de navigateur séparée",externalCamerasDescription:"Configurer des caméras externes pour remplacer la caméra intégrée. Supporte les flux MJPEG, RTSP, snapshots HTTP et caméras USB (V4L2). Lorsqu'activée, la caméra externe est utilisée pour la vue en direct et les photos de fin.",cameraPlaceholderUsb:"Chemin du périphérique (/dev/video0)",cameraPlaceholderUrl:"URL caméra (rtsp://... ou http://...)",cameraTypeMjpeg:"Flux MJPEG",cameraTypeRtsp:"Flux RTSP",cameraTypeSnapshot:"Snapshot HTTP",cameraTypeUsb:"Caméra USB (V4L2)",cameraSnapshotUrl:"URL de capture (facultatif)",cameraSnapshotUrlPlaceholder:"http://192.168.1.61:1984/api/frame.jpeg?src=printer",cameraSnapshotUrlHelp:"URL d'image unique utilisée pour les miniatures de notification, photos de fin, frames de timelapse par couche et détection de plaque. Le timelapse et la détection de plaque nécessitent chacun leur propre bascule par imprimante — cette URL est juste la source d'image qu'ils utilisent lorsqu'activés. Laisser vide pour capturer depuis le flux en direct ci-dessus. Utile pour go2rtc (/api/frame.jpeg) et caméras IP avec un point de terminaison de capture dédié.",cameraRotation:"Rotation",test:"Tester",connected:"Connecté",disconnected:"Déconnecté",currency:"Devise",defaultFilamentCost:"Coût filament par défaut (par kg)",electricityCost:"Coût électricité par kWh",energyDisplayMode:"Mode d'affichage énergie",energyModePrintDescription:"Le tableau de bord affiche la somme de l'énergie utilisée pendant les impressions",energyModeTotalDescription:"Le tableau de bord affiche l'énergie totale des prises connectées",fileManager:"Gestionnaire de fichiers",createArchiveEntry:"Créer une entrée d'archive lors de l'impression",createArchiveEntryDescription:"Lors de l'impression depuis le gestionnaire de fichiers, créer optionnellement une entrée d'archive",lowDiskSpaceWarning:"Avertissement espace disque faible",lowDiskSpaceDescription:"Afficher un avertissement lorsque l'espace disque libre descend sous ce seuil",printerFirmware:"Firmware imprimante",checkFirmwareDescription:"Vérifier les mises à jour firmware de Bambu Lab",bambuddySoftware:"Logiciel Bambuddy",autoCheckDescription:"Vérifier automatiquement les nouvelles versions au démarrage",checkNow:"Vérifier maintenant",updateAvailableVersion:"Mise à jour disponible : v{{version}}",releaseNotes:"Notes de version",updateViaDocker:"Mettre à jour via Docker Compose :",updateViaHomeAssistant:"Les mises à jour sont gérées par le superviseur Home Assistant. Ouvrez Paramètres → Modules complémentaires → Bambuddy dans Home Assistant pour installer la nouvelle version.",installUpdate:"Installer la mise à jour",latestVersionRunning:"Vous utilisez la dernière version",failedToCheckUpdates:"Échec de la vérification des mises à jour : {{error}}",backupRestore:"Sauvegarde & Restauration",backupRestoreDescription:"Exporter/importer les paramètres et configurer la sauvegarde GitHub",goToBackup:"Aller à la sauvegarde",externalUrl:"URL externe",externalUrlDescription:"L'URL externe où Bambuddy est accessible. Utilisée pour les images de notification et les intégrations externes.",bambuddyUrl:"URL Bambuddy",externalUrlHint:"Inclure le protocole et le port (ex : http://192.168.1.100:8000)",ftpRetry:"Réessai FTP",ftpRetryDescription:"Réessayer les opérations FTP lorsque le WiFi de l'imprimante est instable. S'applique aux téléchargements 3MF, uploads d'impression, téléchargements timelapse et mises à jour firmware.",autoRetryDescription:"Réessayer automatiquement les opérations FTP échouées",retryAttempts:"Tentatives de réessai",retryDelay:"Délai de réessai",connectionTimeout:"Délai de connexion",time_one:"{{count}} fois",time_other:"{{count}} fois",second_one:"{{count}} seconde",second_other:"{{count}} secondes",nSeconds:"{{count}} secondes",increaseForWeakWifi:"Augmenter pour les imprimantes avec un WiFi faible",homeAssistant:"Home Assistant",homeAssistantFullDescription:"Se connecter à Home Assistant pour contrôler les prises connectées via l'API REST HA. Supporte les entités switch, light, input_boolean et script.",homeAssistantUrl:"URL Home Assistant",longLivedAccessToken:"Token d'accès longue durée",haTokenHint:"Créer un token dans HA : Profil → Tokens d'accès longue durée → Créer un token",connectionSuccessful:"Connexion réussie",connectionFailed:"Connexion échouée",haConnectionSuccess:"Connexion à Home Assistant réussie.",haConnectionFailed:"Échec de la connexion à Home Assistant.",mqttPublishing:"Publication MQTT",mqttDescription:"Publier les événements BamBuddy vers un broker MQTT externe pour l'intégration avec Node-RED, Home Assistant et d'autres systèmes d'automatisation.",mqttEnableDescription:"Publier les événements vers un broker MQTT externe",brokerHostname:"Nom d'hôte du broker",port:"Port",usernameOptional:"Nom d'utilisateur (optionnel)",passwordOptional:"Mot de passe (optionnel)",topicPrefix:"Préfixe de topic",topicPrefixHint:"Les topics seront : {{prefix}}/printers/<serial>/status, etc.",prometheusMetrics:"Métriques Prometheus",prometheusEndpointDescription:"Exposer les métriques imprimante sur <code>/api/v1/metrics</code> pour la surveillance Prometheus/Grafana.",bearerTokenOptional:"Token Bearer (optionnel)",bearerTokenHint:"Si défini, les requêtes doivent inclure <code>Authorization: Bearer <token></code>",metricsConnectionStatus:"État de connexion",metricsPrinterState:"État imprimante (idle/printing/etc)",metricsPrintProgress:"Progression impression 0-100%",metricsBedTemp:"Température du plateau",metricsNozzleTemp:"Température de la buse",metricsPrintsTotal:"Total impressions par résultat",metricsMore:"...et plus (couches, ventilateurs, file d'attente, utilisation filament)",smartPlugsDescription:"Connecter des prises connectées (Tasmota ou Home Assistant) pour automatiser le contrôle de l'alimentation et suivre la consommation d'énergie de vos imprimantes.",allOn:"Tout allumer",allOff:"Tout éteindre",addSmartPlug:"Ajouter une prise",energySummary:"Résumé énergétique",currentPower:"Puissance actuelle",plugsOnline:"{{reachable}}/{{total}} prises en ligne",today:"Aujourd'hui",yesterday:"Hier",total:"Total",enablePlugsForSummary:"Activer les prises pour voir le résumé énergétique",addNotificationProvider:"Ajouter",systemBadge:"(Système)",creating:"Création...",changing:"Modification...",deleteUserAndItems:"Supprimer l'utilisateur ET ses éléments",deleteUserKeepItems:"Supprimer l'utilisateur, garder les éléments (deviennent sans propriétaire)",ok:"OK",twoFa:{totpTitle:"Application Authenticator (TOTP)",totpDesc:"Utilisez une application comme Google Authenticator, Aegis ou Authy.",emailOtpTitle:"OTP par e-mail",emailOtpDesc:"Envoyez un code à usage unique à {{email}} lors de la connexion.",emailOtpNoEmail:"Ajoutez une adresse e-mail à votre compte pour activer cette méthode.",addEmailFirst:"Votre compte n'a pas d'adresse e-mail. Demandez à un administrateur d'en ajouter une.",setupTotp:"Configurer l'application Authenticator",setupAuthApp:"Configurer l'application Authenticator",setupInstructions:"Scannez le QR code avec votre application authenticator, puis confirmez avec un code.",manualEntry:"Impossible de scanner ? Entrez ce secret manuellement :",scannedContinue:"Code scanné — continuer",enterCodeToConfirm:"Entrez le code à 6 chiffres de votre application authenticator pour confirmer.",activate:"Activer",disableTotp:"Désactiver l'Authenticator",disableConfirmHint:"Entrez un code TOTP valide ou un code de secours pour désactiver l'authenticator.",totpDisabled:"Application Authenticator désactivée.",emailOtpEnabled:"OTP par e-mail activé.",emailOtpDisabled:"OTP par e-mail désactivé.",smtpRequired:"Veuillez d'abord configurer et tester les paramètres SMTP.",invalidCode:"Code invalide. Veuillez réessayer.",enableEmailOtp:"Activer OTP par e-mail",disableEmailOtp:"Désactiver OTP par e-mail",emailSetupEnterCode:"Un code de vérification a été envoyé à votre adresse e-mail. Entrez-le ci-dessous pour confirmer que vous possédez cette boîte de réception.",verifyAndEnable:"Vérifier et activer",emailDisablePasswordHint:"Entrez le mot de passe de votre compte pour confirmer la désactivation de l'OTP par e-mail.",passwordPlaceholder:"Entrez votre mot de passe",backupCodesTitle:"Sauvegardez vos codes de secours",backupCodesWarning:"Conservez ces codes en lieu sûr. Chaque code ne peut être utilisé qu'une seule fois et ne sera plus affiché.",backupCodesRemaining:"{{count}} codes de secours restants",savedCodes:"Codes sauvegardés",regenBackup:"Régénérer les codes de secours",regenBackupHint:"Entrez votre code TOTP actuel pour générer 10 nouveaux codes de secours. Tous les codes existants seront invalidés.",newBackupCodes:"Nouveaux codes de secours",linkedAccounts:"Comptes SSO liés",linkedAccountsDesc:"Ces fournisseurs d'identité externes sont liés à votre compte.",oidcUnlinked:"Compte dissocié."},oidc:{title:"Fournisseurs SSO / OIDC",desc:"Configurez des fournisseurs OpenID Connect pour l'authentification unique.",addProvider:"Ajouter un fournisseur",newProvider:"Nouveau fournisseur",empty:"Aucun fournisseur OIDC configuré.",created:"Fournisseur créé.",updated:"Fournisseur mis à jour.",deleted:"Fournisseur supprimé.",refreshIcon:"Actualiser l'icône",removeIcon:"Supprimer l'icône",iconRefreshed:"Icône actualisée.",iconRemoved:"Icône supprimée.",iconFetchFailed:"Impossible de récupérer l'icône depuis l'URL du fournisseur.",deleteTitle:"Supprimer le fournisseur",deleteMessage:'Supprimer "{{name}}" ? Tous les comptes liés seront déconnectés.',form:{name:"Nom d'affichage",issuerUrl:"URL de l'émetteur",clientId:"ID client",clientSecret:"Secret client",scopes:"Portées",iconUrl:"URL de l'icône (optionnel)",enabled:"Activé",autoCreate:"Créer les utilisateurs automatiquement",autoCreateDesc:"Crée automatiquement un compte local lors de la première connexion.",autoLink:"Lier automatiquement les comptes existants",autoLinkDesc:"Lie les comptes locaux existants par e-mail lors de la première connexion.",secretHint:"laisser vide pour conserver",secretPlaceholder:"nouveau secret",emailClaim:"Claim e-mail",emailClaimDesc:"Claim JWT utilisé comme identité e-mail. Utiliser 'preferred_username' ou 'upn' pour Azure Entra ID (qui n'envoie pas email_verified). Utiliser uniquement des noms de claims de confiance.",emailClaimPlaceholder:"e-mail",emailClaimCustomClaimAutoLinkWarning:"Les revendications personnalisées sont sûres pour la liaison auto uniquement lorsque la valeur est administrée par le tenant (par ex. Azure Entra ID upn / preferred_username). N'activez pas la liaison auto si votre IdP permet aux utilisateurs de s'auto-attribuer cette revendication.",requireEmailVerified:"Exiger la vérification e-mail",requireEmailVerifiedDesc:"N'accepter le claim e-mail que si le fournisseur le marque comme vérifié.",requireEmailVerifiedWarning:"Avertissement : l'e-mail sera accepté sans vérification. À utiliser uniquement avec des fournisseurs de confiance.",requireEmailVerifiedAutoLink:"Désactiver le lien automatique d'abord pour modifier ce paramètre.",defaultGroup:"Groupe par défaut",defaultGroupDesc:"Groupe attribué aux utilisateurs créés automatiquement. Repli sur Viewers si non défini.",defaultGroupViewersFallback:"Viewers (par défaut)"}},encryption:{title:"Statut du chiffrement MFA",enabledFromEnv:"Chiffrement au repos activé (clé depuis la variable d'environnement MFA_ENCRYPTION_KEY)",enabledFromFile:"Chiffrement au repos activé (clé chargée depuis le répertoire de données)",enabledGenerated:"Chiffrement au repos activé avec une clé auto-générée",notConfigured:"Chiffrement au repos non configuré",notConfiguredDesc:"Les secrets TOTP et client_secrets OIDC sont stockés en clair. Définissez MFA_ENCRYPTION_KEY ou redémarrez Bambuddy avec un répertoire de données accessible en écriture pour en générer un automatiquement.",allEncrypted:"Tous les secrets MFA sont chiffrés au repos.",legacyRowsLabel:"Lignes héritées en clair",encryptedRowsLabel:"Lignes chiffrées",legacyRowsWarning:"{{count}} ligne(s) héritée(s) en clair détectée(s). Réenregistrez le fournisseur OIDC ou réinscrivez l'application d'authentification de l'utilisateur pour migrer vers le stockage chiffré.",backupHint:"La clé auto-générée est stockée dans DATA_DIR/.mfa_encryption_key et incluse dans les ZIP de sauvegarde locale. Conservez vos sauvegardes en sécurité ou définissez MFA_ENCRYPTION_KEY explicitement.",decryptionBrokenTitle:"Clé de chiffrement manquante",decryptionBrokenError:"{{count}} enregistrement(s) chiffré(s) ne peuvent pas être déchiffrés car la clé de chiffrement n'est plus disponible. Restaurez le MFA_ENCRYPTION_KEY précédent ou DATA_DIR/.mfa_encryption_key pour récupérer.",migrationErrorWarning:"{{count}} ligne(s) ancienne(s) n'ont pas pu être rechiffrée(s) au démarrage. Vérifiez les journaux du serveur et redémarrez Bambuddy pour réessayer."},spoolbuddy:{infoTitle:"Périphériques SpoolBuddy",infoBody:"Les bornes SpoolBuddy s'enregistrent automatiquement via heartbeat. Désinscrivez ici un appareil qui n'est plus utilisé ou un doublon obsolète laissé par un crash du daemon.",duplicatesTitle:"{{count}} appareils enregistrés",duplicatesBody:"Seul le premier appareil enregistré est utilisé par l'interface du kiosk. Si l'un de ces appareils est un doublon obsolète issu d'un crash, désinscrivez-le — un appareil en ligne se ré-enregistrera automatiquement au prochain heartbeat.",empty:"Aucun appareil SpoolBuddy enregistré pour le moment.",online:"En ligne",offline:"Hors ligne",unregister:"Désinscrire",unregisterSuccess:"Appareil désinscrit",unregisterError:"Échec de la désinscription",confirmTitle:"Désinscrire l'appareil SpoolBuddy ?",confirmBody:`Cela retirera "{{hostname}}" ({{deviceId}}) de la base de données. Si l'appareil est en ligne, il se ré-enregistrera automatiquement au prochain heartbeat.`,ipAddress:"Adresse IP",firmware:"Micrologiciel",lastSeen:"Dernière activité",daemonUptime:"Uptime du daemon",systemUptime:"Uptime système",never:"jamais",nfc:"NFC",scale:"Balance",cpuTemp:"Temp. CPU",cpuLoad:"Charge CPU",memory:"Mémoire",disk:"Disque",update:"Mettre à jour",updateConfirmTitle:"Mettre à jour le daemon Spoolbuddy ?",updateConfirmBody:'Déclencher une mise à jour logicielle sur "{{hostname}}" ? Le daemon redémarrera une fois la mise à jour appliquée.',restartBrowser:"Redémarrer le navigateur",restartBrowserConfirmTitle:"Redémarrer le navigateur du kiosk ?",restartBrowserConfirmBody:`Redémarrer le navigateur du kiosk sur "{{hostname}}" ? L'écran sera momentanément vide.`,restartDaemon:"Redémarrer le daemon",restartDaemonConfirmTitle:"Redémarrer le daemon Spoolbuddy ?",restartDaemonConfirmBody:`Redémarrer le daemon Spoolbuddy sur "{{hostname}}" ? L'appareil sera hors ligne quelques secondes.`,reboot:"Redémarrer",rebootConfirmTitle:"Redémarrer l'appareil ?",rebootConfirmBody:`Redémarrer "{{hostname}}" ? L'appareil sera hors ligne pendant environ une minute.`,shutdown:"Éteindre",shutdownConfirmTitle:"Éteindre l'appareil ?",shutdownConfirmBody:`Éteindre "{{hostname}}" ? Vous aurez besoin d'un accès physique pour le rallumer.`,commandConfirm:"Confirmer",commandQueued:"Commande en file d'attente",commandError:"Échec de l'envoi de la commande"}},notification:{printStarted:{title:"Impression démarrée",body:"{{printer}} : {{filename}} commence l'impression"},printCompleted:{title:"Impression terminée",body:"{{printer}} : {{filename}} a réussi"},printFailed:{title:"Impression échouée",body:"{{printer}} : {{filename}} a échoué"},printStopped:{title:"Impression arrêtée",body:"{{printer}} : {{filename}} a été arrêtée"},printProgress:{title:"Progression d'impression",body:"{{printer}} : {{filename}} est à {{percent}}%"},printerOffline:{title:"Imprimante hors ligne",body:"{{printer}} est déconnectée"},printerError:{title:"Erreur imprimante",body:"{{printer}} : {{error}}"},filamentLow:{title:"Filament bas",body:"{{printer}} : Le filament est presque vide"},maintenanceDue:{title:"Maintenance due",body:"{{printer}} : {{items}} demandent votre attention"}},errors:{generic:"Une erreur est survenue",networkError:"Erreur réseau. Vérifiez votre connexion.",notFound:"Non trouvé",unauthorized:"Non autorisé",serverError:"Erreur serveur",validationError:"Vérifiez vos saisies",printerConnectionFailed:"Échec connexion imprimante",saveFailed:"Échec enregistrement",deleteFailed:"Échec suppression",loadFailed:"Échec chargement"},hmsErrors:{title:"Erreurs - {{name}}",noErrors:"Aucune erreur",viewOnWiki:"Voir sur le Wiki Bambu Lab",clearInstructions:"Effacez les erreurs sur l'imprimante pour les retirer ici.",clearErrors:"Effacer les erreurs",clearSuccess:"Erreurs HMS effacées",clearFailed:"Échec de l'effacement des erreurs HMS"},mqttDebug:{title:"Journal de débogage MQTT",searchPlaceholder:"Chercher topic ou message...",noMessages:"Aucun message enregistré",startLoggingHint:'Cliquez sur "Démarrer" pour capturer les messages MQTT',noMessagesMatch:"Aucun message ne correspond",adjustFilterHint:"Ajustez votre recherche",incoming:"Entrant",outgoing:"Sortant",loggingStopped:"Enregistrement arrêté",loggingActive:"Enregistrement actif - rafraîchissement auto",startLogging:"Démarrer",stopLogging:"Arrêter",clearLog:"Effacer le journal",topic:"Sujet",timestamp:"Horodatage",direction:"Direction",all:"Tous"},printerFiles:{title:"Gestionnaire de fichiers",storageUsed:"Utilisé :",storageFree:"Libre :",filterPlaceholder:"Filtrer les fichiers...",deleteButton:"Supprimer",deleteFiles:"Supprimer {{count}} fichiers",deleteFileConfirm:'Supprimer "{{name}}" ?',deleteFilesConfirm:"Supprimer les {{count}} fichiers sélectionnés ?",noFiles:"Aucun fichier sur l'imprimante",loadingFiles:"Chargement...",failedToLoad:"Échec chargement fichiers",toast:{filesDeleted:"{{count}} fichier(s) supprimé(s)",deleteFailed:"Échec suppression : {{error}}"}},confirm:{delete:"Voulez-vous vraiment supprimer cet élément ?",unsavedChanges:"Changements non sauvegardés. Voulez-vous quitter ?",clearQueue:"Voulez-vous vraiment vider la file d'attente ?"},login:{title:"Connexion Bambuddy",subtitle:"Connectez-vous à votre compte",username:"Utilisateur",usernamePlaceholder:"Entrez votre utilisateur",usernameOrEmail:"Utilisateur ou Email",usernameOrEmailPlaceholder:"Utilisateur ou @ Email",password:"Mot de passe",passwordPlaceholder:"Entrez votre mot de passe",signIn:"Se connecter",signingIn:"Connexion...",rememberMe:"Se souvenir de moi",forgotPassword:"Mot de passe oublié ?",loginSuccess:"Connecté avec succès",loginFailed:"Échec de connexion",enterCredentials:"Entrez vos identifiants",enterEmail:"Veuillez entrer votre adresse e-mail",oidcLoginFailed:"Échec de la connexion OIDC",oidcErrors:{providerError:"Le fournisseur d'identité a renvoyé une erreur",missingParameters:"Il manque des paramètres requis dans le callback OIDC",invalidState:"L'état OIDC est invalide ou a déjà été utilisé",stateExpired:"La session OIDC a expiré — veuillez réessayer",providerNotFound:"Fournisseur OIDC introuvable",discoveryFailed:"Impossible de récupérer le document de découverte OIDC",invalidDiscovery:"Le document de découverte OIDC est invalide",networkError:"Erreur réseau lors de l'échange de jeton OIDC",badResponse:"Réponse inattendue lors de l'échange de jeton OIDC",noIdToken:"Le fournisseur OIDC n'a pas renvoyé de jeton d'identité",validationFailed:"La validation du jeton OIDC a échoué",nonceMismatch:"Le nonce OIDC ne correspond pas — possible attaque par rejeu",missingSubClaim:"Le jeton OIDC est dépourvu de la revendication sub",noLinkedAccount:"Aucun compte local est lié à cette identité OIDC",accountInactive:"Votre compte est inactif",userResolutionFailed:"Impossible de résoudre votre compte",internalError:"Une erreur interne est survenue lors de la connexion OIDC",tokenExchangeFailed:"L'échange de jeton OIDC a échoué"},forgotPasswordTitle:"Mot de passe oublié",forgotPasswordMessage:"Contactez votre administrateur pour réinitialiser votre accès.",forgotPasswordEmailMessage:"Entrez votre email pour recevoir un nouveau mot de passe.",emailAddress:"Adresse Email",emailPlaceholder:"votre.email@exemple.com",cancel:"Annuler",sending:"Envoi...",sendResetEmail:"Envoyer l'email",howToReset:"Comment réinitialiser :",resetStep1:"Contactez votre admin Bambuddy",resetStep2:"Demandez une réinitialisation dans la Gestion Utilisateurs",resetStep3:"Il vous donnera un mot de passe temporaire",resetStep4:"Connectez-vous et changez-le dans les Paramètres",gotIt:"Compris",twoFA:{title:"Authentification à deux facteurs",subtitle:"Votre compte est protégé par la 2FA. Saisissez le code de vérification ci-dessous.",methodAuthenticator:"Application d'authentification",methodEmail:"Code par e-mail",methodBackup:"Code de récupération",instructionsTotp:"Ouvrez votre application d'authentification et saisissez le code à 6 chiffres pour Bambuddy.",instructionsEmail:"Un code à 6 chiffres a été envoyé à votre adresse e-mail. Il est valable 10 minutes.",instructionsEmailNotSent:"Cliquez ci-dessous pour recevoir un code de vérification par e-mail.",instructionsBackup:"Saisissez l'un de vos codes de récupération à 8 caractères. Chaque code ne peut être utilisé qu'une seule fois.",sendCodeButton:"Envoyer le code par e-mail",sendingCode:"Envoi en cours...",resendCode:"Renvoyer le code",codeLabel:"Code de vérification",backupCodeLabel:"Code de récupération",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"Vérifier",verifyingButton:"Vérification en cours...",backToLogin:"← Retour à la connexion",orContinueWith:"ou continuer avec",signInWith:"Se connecter avec {{provider}}",enterCode:"Veuillez entrer le code de vérification",sendCodeFailed:"Échec de l'envoi du code de vérification",invalidCode:"Code invalide. Veuillez réessayer."},resetPassword:{title:"Définir un nouveau mot de passe",subtitle:"Saisissez et confirmez votre nouveau mot de passe ci-dessous.",newPassword:"Nouveau mot de passe",newPasswordPlaceholder:"Au moins 8 caractères",confirmPassword:"Confirmer le mot de passe",confirmPasswordPlaceholder:"Répéter le nouveau mot de passe",saving:"Enregistrement…",submit:"Définir le mot de passe",backToLogin:"Retour à la connexion",passwordsDoNotMatch:"Les mots de passe ne correspondent pas",passwordTooShort:"Le mot de passe doit contenir au moins 8 caractères",resetFailed:"Échec de la réinitialisation. Le lien a peut-être expiré."}},setup:{title:"Configuration Bambuddy",subtitle:"Configurez l'authentification",enableAuth:"Activer l'authentification",adminAccount:"Compte Admin",adminAccountDesc:"Si des admins existent, ils seront utilisés. Sinon, créez-en un ci-dessous.",adminUsername:"Utilisateur Admin",adminPassword:"Mot de passe Admin",optionalIfAdminExists:"(optionnel si admin existe)",adminUsernamePlaceholder:"Nom admin (optionnel)",adminPasswordPlaceholder:"Mdp admin (optionnel)",confirmPassword:"Confirmer mdp",confirmPasswordPlaceholder:"Confirmez mdp admin",settingUp:"Configuration...",completeSetup:"Terminer la configuration",toast:{authEnabledAdminCreated:"Authentification activée et admin créé",authEnabledExistingAdmins:"Authentification activée avec admins existants",setupCompleted:"Configuration terminée",enterBothCredentials:"Entrez les deux ou laissez vide pour utiliser les admins existants",passwordsDoNotMatch:"Les mots de passe ne correspondent pas",passwordTooShort:"Minimum 6 caractères"}},changePassword:{title:"Changer le mot de passe",currentPassword:"Mot de passe actuel",currentPasswordPlaceholder:"Entrez mdp actuel",newPassword:"Nouveau mot de passe",newPasswordPlaceholder:"Nouveau mdp (min 6 char)",confirmPassword:"Confirmer nouveau mdp",confirmPasswordPlaceholder:"Confirmez nouveau mdp",passwordsDoNotMatch:"Les mots de passe ne correspondent pas",passwordTooShort:"Minimum 6 caractères",changing:"Changement...",success:"Mot de passe modifié",failed:"Échec modification"},plateAlert:{title:"Impression en Pause !",message:"Objets détectés sur le plateau. L'impression a été suspendue automatiquement. Videz le plateau avant de reprendre.",understand:"J'ai compris"},camera:{title:"Vue Caméra",invalidPrinterId:"ID imprimante invalide",live:"Direct",snapshot:"Instantané",restartStream:"Redémarrer le flux",refreshSnapshot:"Rafraîchir l'image",fullscreen:"Plein écran",exitFullscreen:"Quitter plein écran",connectingToCamera:"Connexion caméra...",capturingSnapshot:"Capture...",connectionLost:"Connexion perdue",connectionFailed:"Échec connexion caméra",reconnecting:"Reconnexion dans {{countdown}}s... (essai {{attempt}}/{{max}})",reconnectNow:"Reconnexion immédiate",cameraUnavailable:"Caméra indisponible",cameraUnavailableDesc:"Vérifiez que l'imprimante est allumée.",noCamera:"Aucune caméra disponible",retry:"Réessayer",cameraStream:"Flux caméra",zoomOut:"Zoom arrière",zoomIn:"Zoom avant",resetZoom:"Réinitialiser zoom",recording:"Enregistrement",startRecording:"Démarrer l'enregistrement",stopRecording:"Arrêter l'enregistrement",chamberLight:"Basculer lumière chambre",unavailable:"Caméra indisponible",diagnose:{button:"Diagnostic",modalTitle:"Diagnostic de la caméra",running:"Diagnostic en cours...",runFailed:"Impossible d'exécuter le diagnostic : {{error}}",retry:"Relancer",stage:{tcp_reachable:"Accessibilité réseau",first_frame:"Capture d'image",live_stream_active:"Flux en direct actif"},summary:{all_ok:"La caméra fonctionne. Toutes les étapes du diagnostic ont réussi.",live_stream_active_healthy:"La caméra diffuse actuellement avec des images récentes — aucun test nécessaire.",printer_unreachable:"L'imprimante n'est pas joignable. Vérifiez l'adresse IP, la connexion réseau et que l'imprimante est allumée.",camera_port_closed:"L'imprimante répond mais le port de la caméra est fermé. Assurez-vous que le mode LAN et le mode développeur sont activés dans les paramètres de l'imprimante.",no_frame:"Connexion à la caméra établie mais aucune image reçue. Réessayez ou vérifiez que la caméra est activée dans les paramètres de l'imprimante.",unknown_failure:"Le diagnostic de la caméra a échoué pour une raison inconnue. Consultez le journal de support pour plus de détails."},meta:{protocol:"Protocole",port:"Port",profile:"Profil"}}},groups:{title:"Gestion des Groupes",subtitle:"Gérez les permissions pour le contrôle d'accès",backToSettings:"Retour aux paramètres",createGroup:"Créer un groupe",noPermission:"Accès refusé.",system:"Système",noDescription:"Pas de description",usersCount:"{{count}} utilisateurs",permissionsCount:"{{count}} permissions",edit:"Modifier",delete:"Supprimer",toast:{created:"Groupe créé",updated:"Groupe mis à jour",deleted:"Groupe supprimé",enterGroupName:"Entrez un nom de groupe"},modal:{editGroup:"Modifier le groupe",createGroup:"Créer un groupe",cancel:"Annuler",saving:"Enregistrement...",creating:"Création...",saveChanges:"Enregistrer"},form:{groupName:"Nom du groupe",groupNamePlaceholder:"Nom du groupe",systemGroupWarning:"Les groupes système sont fixes",description:"Description",descriptionPlaceholder:"Description (optionnel)",permissions:"Permissions ({{count}} sélectionnées)"},deleteModal:{title:"Supprimer le groupe",message:"Les utilisateurs de ce groupe perdront ces permissions.",confirm:"Supprimer"},editor:{title:"Modifier le groupe",createTitle:"Créer un groupe",search:"Rechercher des permissions...",selectAll:"Tout sélectionner",clearAll:"Tout désélectionner",permissionsSelected:"{{count}} sélectionnée(s)",noResults:"Aucune permission ne correspond à votre recherche"}},users:{title:"Gestion des Utilisateurs",subtitle:"Gérez les accès à Bambuddy",backToSettings:"Retour aux paramètres",createUser:"Créer un utilisateur",noPermission:"Accès refusé.",admin:"Administrateur",noGroups:"Aucun groupe",active:"Actif",inactive:"Inactif",edit:"Modifier",delete:"Supprimer",system:"Système",noGroupsAvailable:"Aucun groupe disponible",table:{username:"Utilisateur",groups:"Groupes",status:"Statut",actions:"Actions"},toast:{created:"Utilisateur créé",updated:"Utilisateur mis à jour",deleted:"Utilisateur supprimé",fillRequired:"Remplissez les champs requis",passwordsDoNotMatch:"Les mots de passe ne correspondent pas",passwordTooShort:"Minimum 6 caractères",ldapProvisioned:'Utilisateur LDAP "{{username}}" provisionné'},modal:{createUser:"Créer utilisateur",editUser:"Modifier utilisateur",cancel:"Annuler",creating:"Création...",saving:"Enregistrement...",saveChanges:"Enregistrer",advancedAuthSubtitle:"avec Authentification Avancée",tabsAriaLabel:"Source utilisateur",localTab:"Local",ldapTab:"LDAP",ldapSearchLabel:"Rechercher dans l'annuaire",ldapSearchPlaceholder:"Tapez un nom d'utilisateur, un nom ou un e-mail...",ldapMinChars:"Tapez au moins 2 caractères pour rechercher",ldapTypeToSearch:"Commencez à taper pour rechercher dans l'annuaire LDAP",ldapSearching:"Recherche dans l'annuaire...",ldapNoResults:"Aucun utilisateur correspondant dans l'annuaire",ldapSearchError:"Échec de la recherche dans l'annuaire. Vérifiez l'état du serveur LDAP.",ldapAlreadyProvisioned:"Déjà provisionné",ldapSelectedLabel:"Sélectionné",ldapProvision:"Provisionner l'utilisateur",ldapProvisioning:"Provisionnement...",ldapErrorProvision:"Échec du provisionnement. Vérifiez l'état du serveur LDAP et réessayez."},form:{username:"Utilisateur",usernamePlaceholder:"Nom utilisateur",email:"E-mail",emailPlaceholder:"utilisateur@exemple.com",password:"Mot de passe",passwordPlaceholder:"Mot de passe",confirmPassword:"Confirmer mdp",confirmPasswordPlaceholder:"Confirmez mdp",newPasswordPlaceholder:"Nouveau mdp",confirmNewPasswordPlaceholder:"Confirmez nouveau mdp",leaveBlankToKeep:"Laissez vide pour conserver l'actuel",groups:"Groupes",optional:"optionnel",autoGeneratedPassword:"Un mot de passe sera généré et envoyé par email.",passwordManagedByAdvancedAuth:'Géré par Auth Avancée. Utilisez "Réinitialiser" pour envoyer un nouveau mdp par email.',resetPassword:"Réinitialiser le mot de passe",resettingPassword:"Réinitialisation..."},deleteModal:{title:"Supprimer utilisateur",message:"Cette action est irréversible.",confirm:"Supprimer"}},streamOverlay:{title:"Superposition Flux",invalidPrinterId:"ID invalide",cameraStream:"Flux caméra",progress:"Progression",eta:"Fin estimée",printerIdle:"Imprimante inactive",printerOffline:"Imprimante hors ligne",status:{printing:"Impression",paused:"En pause",finished:"Terminée",failed:"Échouée",idle:"Inactive",unknown:"Inconnue"}},profiles:{title:"Profils",subtitle:"Gérez vos presets slicer et calibrations Pressure Advance",tabs:{bambuCloud:"Bambu Cloud",orcaCloud:"Orca Cloud",local:"Profils Locaux",kprofiles:"Profils K"},orcaCloud:{connectedAs:"Connecté en tant que",logout:"Déconnecter",noLogoutPermission:"Vous n'avez pas la permission de vous déconnecter",noConnectPermission:"Vous n'avez pas la permission de vous connecter à Orca Cloud",retry:"Réessayer",back:"Utiliser une autre méthode de connexion",connect:{title:"Se connecter à Orca Cloud",description:"Connectez-vous à votre compte Orca Cloud pour synchroniser vos profils de slicer dans Bambuddy."},providers:{google:"Se connecter avec Google",apple:"Se connecter avec Apple",github:"Se connecter avec GitHub",email:"Se connecter avec e-mail et mot de passe"},password:{title:"Se connecter avec e-mail et mot de passe",email:"E-mail",emailPlaceholder:"vous@exemple.fr",password:"Mot de passe",submit:"Se connecter"},paste:{title:"Terminer la connexion",step1:"Un nouvel onglet s'est ouvert avec la page de connexion Orca Cloud. Connectez-vous avec votre compte Orca.",step2:`Votre navigateur sera redirigé vers une URL "localhost" qui ne se chargera pas. C'est normal — c'est cette URL qu'il nous faut.`,step3:"Copiez l'URL complète depuis la barre d'adresse de votre navigateur et collez-la ci-dessous.",signInUrl:"Si l'onglet de connexion ne s'est pas ouvert, cliquez sur cette URL :",label:"Collez l'URL de rappel ici",placeholder:"http://localhost:41172/callback?code=...&state=...",submit:"Terminer la connexion"},profiles:{title:"Vos profils Orca Cloud ({{count}})",refresh:"Actualiser",empty:"Aucun profil trouvé dans votre compte Orca Cloud pour le moment."},toast:{connected:"Connecté à Orca Cloud en tant que {{email}}",disconnected:"Déconnecté d'Orca Cloud"},errors:{startFailed:"Impossible de démarrer la connexion à Orca Cloud.",finishFailed:"Impossible de terminer la connexion à Orca Cloud.",passwordFailed:"Impossible de se connecter avec cet e-mail et ce mot de passe.",passwordEmpty:"Veuillez saisir à la fois votre e-mail et votre mot de passe.",emptyPaste:"Veuillez coller l'URL de rappel depuis votre navigateur.",noCode:"Cette URL ne ressemble pas à un rappel Orca Cloud (aucun paramètre code). Copiez l'URL complète depuis la barre d'adresse."}},localProfiles:{title:"Profils Locaux",subtitle:"Gérez vos presets OrcaSlicer",import:"Importer Profils",importDesc:"Déposez les fichiers .bbscfg, .bbsflmt, .orca_filament, .zip ou .json",importing:"Importation...",search:"Chercher un preset...",noPresets:"Aucun preset local",noSearchResults:"Aucun preset ne correspond à votre recherche",badge:"Local",edit:"Modifier",delete:"Supprimer",cancel:"Annuler",deleteConfirmTitle:"Supprimer Preset",deleteConfirm:"Supprimer définitivement ce preset ?",source:"Source",inheritsFrom:"Hérite de",filamentType:"Type",vendor:"Vendeur",compatiblePrinters:"Imprimantes",nozzleTemp:"Temp Buse",cost:"Coût",density:"Densité",pressureAdvance:"Pressure Advance",filament:"Filament",process:"Processus",printer:"Imprimante",toast:{importSuccess:"{{count}} profil(s) importé(s)",importSkipped:"{{count}} profil(s) ignoré(s) (doublons)",importError:"{{count}} erreur(s) d'import",deleted:"Preset supprimé",updated:"Preset mis à jour"}},connectedAs:"Connecté en tant que",logout:"Déconnexion",noLogoutPermission:"Pas d'autorisation de déconnexion",failedToLoad:"Échec chargement profils",retry:"Réessayer",time:{justNow:"À l'instant",minsAgo:"Il y a {{count}}m",hoursAgo:"Il y a {{count}}h",daysAgo:"Il y a {{count}}j"},toast:{loggedOut:"Déconnecté"},login:{title:"Connexion Bambu Cloud",subtitle:"Synchronisez vos presets slicer",email:"E-mail",password:"Mot de passe",region:"Région",regionGlobal:"Global",regionChina:"Chine",verificationCode:"Code de vérification",totpCode:"Code Authenticator",checkEmail:"Code envoyé à {{email}}",enterTotpHint:"Entrez le code 2FA",accessToken:"Jeton d'accès (Access Token)",accessTokenHint:"Collez votre jeton Bambu Cloud. Les comptes de la région Chine doivent passer par ici (liés à un numéro de téléphone — pas de connexion par e-mail). Le wiki explique comment récupérer le jeton depuis les cookies MakerWorld.",back:"Retour",loginButton:"Connexion",verifyButton:"Vérifier",setTokenButton:"Définir Jeton",useToken:"Utiliser jeton d'accès",useEmail:"Connexion par email",toast:{loggedIn:"Connecté avec succès",codeSent:"Code envoyé par email",enterTotp:"Entrez le code Authenticator",tokenSet:"Jeton défini"}},presets:{myPreset:"Mon preset (modifiable)",duplicate:"Dupliquer",editable:"Modifiable",failedToLoadDetails:"Échec détails preset",deleteConfirm:"Supprimer ce preset ?",deleteWarning:'Ceci supprimera "{{name}}" de Bambu Cloud définitivement.',noDuplicatePermission:"Pas d'autorisation duplication",noEditPermission:"Pas d'autorisation modification",noDeletePermission:"Pas d'autorisation suppression",types:{filament:"Preset filament",printer:"Preset imprimante",process:"Preset processus"},toast:{deleted:"Preset supprimé",created:"Preset créé",updated:"Preset mis à jour",duplicated:"Preset dupliqué",fieldAdded:'Champ "{{key}}" ajouté',exported:"Preset exporté"},baseLabel:"Base : {{name}}",currentLabel:"Actuel : {{name}}",newPreset:"Nouveau Preset",editPreset:"Modifier Preset",duplicatePreset:"Dupliquer Preset",createNewPreset:"Créer un nouveau Preset",customizeSettings:"Personnalisez vos réglages",compareWithBase:"Comparer avec la base",compare:"Comparer",basePreset:"Preset de base",selectBasePreset:"Choisir preset de base...",presetName:"Nom du preset",myCustomPreset:"Mon preset personnalisé",inheritsFrom:"Hérite de",dropJsonToImport:"Glissez JSON pour importer",tabs:{common:"Commun",allFields:"Tous les champs"},availableFields:"Champs disponibles",searchFieldsPlaceholder:"Chercher un champ...",noMatchingFields:"Aucun champ trouvé",allFieldsAdded:"Tous les champs sont ajoutés",addCustomField:"Ajouter un champ personnalisé",yourOverrides:"Vos modifications",noOverridesYet:"Aucune modification",clickFieldsToAdd:"Cliquez à gauche pour ajouter",saveAsTemplate:"Enregistrer comme modèle",jsonTip:"Conseil : Glissez un .json pour importer les réglages"},cloudView:{searchPlaceholder:"Chercher presets...",templates:"Modèles",refresh:"Rafraîchir",newPreset:"Nouveau Preset",clearFilters:"Effacer filtres",compareMode:"Mode Comparaison",selectAnotherPreset:"Choisir un autre preset {{type}}",clickTwoPresets:"Choisissez deux presets de même type",selectFirst:"1. Sélectionner premier",selectSecond:"2. Sélectionner second",compareNow:"Comparer maintenant",lastSynced:"Synchronisé :",showingCount:"{{showing}} sur {{total}} presets",noPresetsFound:"Aucun preset trouvé",columns:{filament:"Filament",process:"Processus",printer:"Imprimante"},noFilamentPresets:"Pas de preset filament",noProcessPresets:"Pas de preset processus",noPrinterPresets:"Pas de preset imprimante",filters:{type:"Type",owner:"Propriétaire",printer:"Imprimante",nozzle:"Buse",filament:"Filament",layer:"Couche",all:"Tous",myPresets:"Mes Presets",builtIn:"Inclus",process:"Processus"},noTemplatesPermission:"Pas d'autorisation modèles",noRefreshPermission:"Pas d'autorisation rafraîchissement",noCreatePermission:"Pas d'autorisation création"},templates:{title:"Modèles rapides",noTemplates:"Aucun modèle",createFirst:"Créez-en depuis l'éditeur de preset",typeFilter:"Type :",deleteTitle:"Supprimer modèle",deleteWarning:"Action irréversible",deleteConfirm:'Supprimer "{{name}}" ?',namePlaceholder:"Nom du modèle",descriptionPlaceholder:"Description",settingsJson:"Paramètres (JSON)",fieldsCount:"{{count}} champs",shownInModals:"Visible dans fenêtres",hiddenInModals:"Masqué dans fenêtres",apply:"Appliquer",toast:{deleted:"Modèle supprimé",updated:"Modèle mis à jour",created:"Modèle créé",applied:"Modèle appliqué"}}},support:{debugLoggingActive:"Débogage actif",manageLogs:"Gérer",collectItem7:"Connectivité et versions firmware",collectItem8:"Statut intégrations (Spoolman, MQTT, HA)",collectItem9:"Interfaces réseau (sous-réseaux)",collectItem10:"Versions packages Python",collectItem11:"Santé base de données",collectItem12:"Détails environnement Docker",bundleGenerating:"Génération du paquet...",bundleStepConnection:"Vérification de la connectivité des imprimantes",bundleStepVirtualPrinters:"Vérification de la configuration des imprimantes virtuelles",bundleStepLogScan:"Analyse des journaux récents pour les problèmes connus",bundleStepBuild:"Création du ZIP du paquet de support"},fileManager:{title:"Gestionnaire de fichiers",subtitle:"Organisez vos fichiers d'impression",uploadFiles:"Téléverser fichiers",newFolder:"Nouveau dossier",folderName:"Nom du dossier",folderNamePlaceholder:"ex: Pièces Utiles",renameFile:"Renommer fichier",renameFolder:"Renommer dossier",invalidFilenameChar:`Le caractère "{{char}}" n'est pas autorisé dans les noms de fichier d'impression. La carte SD de l'imprimante refuse : < > : " / \\ | ? *`,moveFiles:"Déplacer {{count}} fichier(s)",rootNoFolder:"Racine (aucun dossier)",current:"actuel",linkFolder:"Lier le dossier",linkFolderDescription:'Lier "{{name}}" à un projet ou archive.',project:"Projet",archive:"Archive",noProjectsFound:"Aucun projet trouvé",noArchivesFound:"Aucune archive trouvée",unlink:"Délier",link:"Lier",dragDropFiles:"Glissez les fichiers ici",dropFilesHere:"Déposez ici",orClickToBrowse:"ou cliquez pour parcourir",allFileTypesSupported:"Tous types supportés. ZIP extraits.",zipFilesDetected:"ZIP détectés",zipExtractOptions:"Choix de structure pour ZIP :",preserveZipStructure:"Garder structure ZIP",createFolderFromZip:"Dossier par nom du ZIP",stlThumbnailGeneration:"Vignettes STL",zipMayContainStl:"Extraction vignettes possible pour STL.",thumbnailsCanBeGenerated:"Génération vignettes (peut être long).",generateThumbnailsForStl:"Générer vignettes STL",threemfDetected:"Fichiers 3MF détectés",threemfExtractionInfo:"Réglages extraits auto du 3MF.",willBeExtracted:"Sera extrait",filesExtracted:"{{count}} fichiers extraits",uploadComplete:"Terminé : {{succeeded}} succès",uploadFailed:"Échec du téléversement",zipFilesFailed:"{{count}} fichiers échoués",uploading:"Téléversement...",changeLink:"Modifier lien...",linkTo:"Lier à...",linkToProjectOrArchive:"Lier à projet ou archive",addToQueue:"Ajouter à la file",schedulePrint:"Planifier",generateThumbnail:"Générer vignette",generateThumbnails:"Générer vignettes",generateThumbnailsForMissing:"Vignettes STL manquantes",gridView:"Grille",listView:"Liste",lowDiskSpaceWarning:"Espace disque faible",lowDiskSpaceDetails:"{{free}} libre sur {{total}}. Seuil : {{threshold}} Go.",files:"Fichiers",folders:"Dossiers",size:"Taille",free:"Libre",allFiles:"Tous les fichiers",allExternal:"Externes",externalIsEmpty:"Aucun fichier externe",externalEmptyDescription:"Les fichiers de vos dossiers externes liés apparaîtront ici.",wrap:"Retour ligne",enableTextWrapping:"Activer retour ligne",disableTextWrapping:"Désactiver retour ligne",collapse:"Réduire",collapseFoldersByDefault:"Réduire les dossiers par défaut",expandFoldersByDefault:"Développer les dossiers par défaut",dragToResizeTooltip:"Glisser pour redimensionner, double-clic reset",searchFiles:"Chercher fichiers...",allTypes:"Tous types",prints:"Impressions",ascending:"Croissant",descending:"Décroissant",resultsCount:"{{showing}} sur {{total}} fichiers",selectAll:"Tout sélectionner",deselectAll:"Tout désélectionner",selected:"{{count}} sélectionnés",adding:"Ajout...",loadingFiles:"Chargement...",folderIsEmpty:"Dossier vide",noFilesYet:"Aucun fichier",folderEmptyDescription:"Téléversez ou déplacez des fichiers ici.",noFilesDescription:"Téléversez des fichiers pour organiser.",noMatchingFiles:"Aucun fichier correspondant",noMatchingFilesDescription:"Ajustez votre recherche.",clearFilters:"Effacer filtres",printedCount:"Imprimé {{count}}x",uploadedBy:"Téléversé par",deleteFolder:"Supprimer dossier",deleteFile:"Supprimer fichier",deleteFilesCount:"Supprimer {{count}} fichiers",deleteFolderConfirm:"Supprimer le dossier et son contenu ?",deleteFileConfirm:"Supprimer ce fichier ?",deleteFilesConfirm:"Supprimer {{count}} fichiers définitivement ?",deleting:"Suppression...",noPermissionRenameFolder:"Pas d'autorisation renommage",noPermissionLinkFolder:"Pas d'autorisation lien",noPermissionDeleteFolder:"Pas d'autorisation suppression dossier",noPermissionPrint:"Pas d'autorisation impression",noPermissionSlice:"Vous n'avez pas la permission de découper des fichiers",noPermissionAddToQueue:"Pas d'autorisation file",noPermissionDownload:"Pas d'autorisation téléchargement",noPermissionRenameFile:"Pas d'autorisation renommage fichier",noPermissionGenerateThumbnail:"Pas d'autorisation vignettes",noPermissionDeleteFile:"Pas d'autorisation suppression fichier",noPermissionCreateFolder:"Pas d'autorisation nouveau dossier",noPermissionUpload:"Pas d'autorisation téléversement",noPermissionMoveFiles:"Pas d'autorisation déplacement",noPermissionDeleteFiles:"Pas d'autorisation suppression groupée",linkExternal:"Lier externe",linkExternalFolder:"Lier un dossier externe",linkExternalFolderDescription:"Monter un répertoire hôte (NAS, USB, partage réseau) dans le gestionnaire de fichiers. Les fichiers ne sont pas copiés — ils sont lus directement depuis le chemin d'origine.",externalFolderNamePlaceholder:"ex. Impressions NAS",externalPath:"Chemin hôte",externalPathHelp:"Chemin absolu du répertoire sur l'hôte Docker. Doit être monté en bind dans le conteneur.",readOnly:"Lecture seule",readOnlyHelp:"empêche les téléversements et suppressions",showHiddenFiles:"Afficher les fichiers cachés (fichiers point)",externalFolder:"Dossier externe",scanFolder:"Scanner",toast:{folderCreated:"Dossier créé",folderDeleted:"Dossier supprimé",fileDeleted:"Fichier supprimé",filesDeleted:"{{count}} fichiers supprimés",filesMoved:"Fichiers déplacés",folderLinked:"Dossier lié",folderUnlinked:"Dossier délié",externalFolderLinked:"Dossier externe lié et scanné",folderScanned:"Scan terminé : {{added}} ajoutés, {{removed}} supprimés",addedToQueue:"{{count}} fichier(s) ajouté(s)",addedToQueuePartial:"{{added}} ajoutés, {{failed}} échecs",failedToAddToQueue:"Échec ajout file : {{error}}",fileRenamed:"Fichier renommé",folderRenamed:"Dossier renommé",thumbnailsGenerated:"{{count}} vignette(s) générée(s)",thumbnailsGeneratedPartial:"{{succeeded}} succès, {{failed}} échecs",noStlMissingThumbnails:"Aucun STL sans vignette",failedToGenerateThumbnails:"Échec vignettes : {{error}}",thumbnailGenerated:"Vignette générée",failedToGenerateThumbnail:"Échec vignette : {{error}}"}},projects:{title:"Projets",subtitle:"Suivez vos projets d'impression 3D",newProject:"Nouveau Projet",editProject:"Modifier Projet",deleteProject:"Supprimer Projet",projectName:"Nom du Projet",description:"Description",noProjects:"Aucun projet",noProjectsFiltered:"Aucun projet {{status}}",noProjectsFilteredHelp:`Vous n'avez aucun projet "{{status}}". Les projets apparaîtront ici lorsque leur statut changera.`,createFirst:"Créez votre premier projet pour organiser vos builds.",createFirstButton:"Créer votre premier projet",create:"Créer",files:"Fichiers",prints:"Impressions",plates:"plateaux",parts:"pièces",lastModified:"Modifié le",deleteConfirm:"Supprimer ce projet ? Les archives seront déliées mais conservées.",addFiles:"Ajouter fichiers",removeFile:"Retirer fichier",viewDetails:"Détails",namePlaceholder:"ex: Build Voron 2.4",descriptionPlaceholder:"Description optionnelle...",urlLabel:"URL",urlPlaceholder:"https://makerworld.com/...",urlInvalid:"L'URL doit commencer par http:// ou https://",openExternalUrl:"Ouvrir l’URL du projet",coverImageLabel:"Photo de couverture",coverImageAlt:"Photo de couverture du projet",coverImageUpload:"Téléverser",coverImageReplace:"Remplacer",coverImageRemove:"Supprimer",color:"Couleur",targetPlates:"Plateaux cibles",targetPlatesPlaceholder:"ex: 25",targetPlatesHelp:"Nombre total de jobs",targetParts:"Pièces cibles",targetPartsPlaceholder:"ex: 150",targetPartsHelp:"Nombre total d'objets",tagsLabel:"Tags (séparés par virgules)",tagsPlaceholder:"ex: voron, cadeau",dueDate:"Échéance",priority:"Priorité",priorityLow:"Basse",priorityNormal:"Normale",priorityHigh:"Haute",priorityUrgent:"Urgente",statusActive:"Actif",statusCompleted:"Terminé",statusArchived:"Archivé",done:"Fait",completed:"terminé",failed:"échoué",inQueue:"en file",noPrintsYet:"Aucune impression",printJobs:"Jobs (plateaux)",partsPrinted:"Pièces imprimées",failedParts:"Pièces échouées",import:"Importer",export:"Exporter",importProject:"Importer projet",exportAll:"Exporter tous les projets",loading:"Chargement des projets...",noEditPermission:"Pas d'autorisation de modification",noDeletePermission:"Pas d'autorisation de suppression",noCreatePermission:"Pas d'autorisation de création",noImportPermission:"Pas d'autorisation d'import",noExportPermission:"Pas d'autorisation d'export",toast:{created:"Projet créé",updated:"Projet mis à jour",deleted:"Projet supprimé",imported:"Projet importé",multipleImported:"{{count}} projets importés",importFailed:"Échec d'import",exported:"Projets exportés (métadonnées)"}},projectDetail:{notFound:"Projet non trouvé",backToProjects:"Retour aux Projets",export:"Exporter",exportProject:"Exporter projet",noExportPermission:"Pas d'autorisation export",noEditPermission:"Pas d'autorisation modification",partOf:"Fait partie de :",priorityLabel:"Priorité :",noPrints:"Aucune impression dans ce projet",status:{active:"Actif",completed:"Terminé",archived:"Archivé"},priority:{low:"Basse",normal:"Normale",high:"Haute",urgent:"Urgente"},dueDate:{overdue:"En retard",today:"Aujourd'hui",daysLeft:"{{count}} jours restants"},progress:{platesProgress:"Progression Plateaux",partsProgress:"Progression Pièces",printJobs:"jobs d'impression",parts:"pièces",percentComplete:"{{percent}}% terminé",remaining:"{{count}} restant(s)"},stats:{printJobs:"Jobs d'Impression",total:"total",failed:"{{count}} échecs",partsPrinted:"{{count}} pièces imprimées",printTime:"Temps d'Impression",filamentUsed:"Filament utilisé"},cost:{title:"Suivi des coûts",filamentCost:"Coût Filament",energy:"Énergie",totalCost:"Coût Total",total:"Total",includesBom:"BOM incluse",budget:"Budget",remaining:"Restant"},subProjects:{title:"Sous-projets ({{count}})"},notes:{title:"Notes",noEditPermission:"Pas d'autorisation modification",placeholder:"Ajouter des notes...",empty:"Aucune note. Cliquez sur modifier."},files:{title:"Fichiers",linkFolders:"Liez des dossiers depuis le gestionnaire",forQuickAccess:"pour un accès rapide.",fileCount:"{{count}} fichier(s)",empty:"Aucun dossier lié.",noFiles:"Aucun fichier dans ce dossier.",print:"Imprimer maintenant",addToQueue:"Ajouter à la file"},bom:{title:"BOM (Liste matériel)",acquired:"{{completed}}/{{total}} acquis",showAll:"Tout afficher",hideDone:"Masquer acquis",addPart:"Ajouter matériel",noAddPermission:"Pas d'autorisation ajout",partNamePlaceholder:"Nom (ex: Vis M3x8)",partName:"Nom de pièce",qty:"Qté",price:"Prix ({{currency}})",sourcingUrlPlaceholder:"Lien d'achat (optionnel)",remarksPlaceholder:"Remarques (optionnel)",deletePart:"Supprimer pièce",deleteConfirm:'Supprimer "{{name}}" ?',noUpdatePermission:"Pas d'autorisation mise à jour",noEditPermission:"Pas d'autorisation modification",noDeletePermission:"Pas d'autorisation suppression",totalCost:"Coût total :",empty:"BOM vide. Ajoutez du matériel ou de l'électronique."},timeline:{title:"Historique d'activité",empty:"Aucune activité."},template:{saveAsTemplate:"Enregistrer comme modèle",noCreatePermission:"Pas d'autorisation modèle"},queue:{title:"File d'attente",viewAll:"Tout voir",printing:"{{count}} en cours",queued:"{{count}} en file"},prints:{title:"Impressions ({{count}})"},toast:{projectUpdated:"Projet mis à jour",partAdded:"Pièce ajoutée",partRemoved:"Pièce retirée",exportFailed:"Échec export",projectExported:"Projet exporté",templateCreated:"Modèle créé"}},system:{title:"Informations Système",version:"Version",uptime:"Temps de fonctionnement",cpuUsage:"Utilisation CPU",memoryUsage:"Utilisation RAM",diskUsage:"Utilisation Disque",networkInfo:"Infos Réseau",logs:"Journaux",debugMode:"Mode Débogage",enableDebug:"Activer débogage",disableDebug:"Désactiver débogage",downloadLogs:"Télécharger logs",clearLogs:"Effacer logs",dockerInfo:"Infos Docker",containerName:"Nom conteneur",imageName:"Nom image",platform:"Plateforme",architecture:"Architecture"},library:{title:"Bibliothèque Filament",addFilament:"Ajouter Filament",editFilament:"Modifier Filament",deleteFilament:"Supprimer Filament",vendor:"Vendeur",material:"Matériau",color:"Couleur",kFactor:"Facteur K",temperature:"Température",noFilaments:"Bibliothèque vide",deleteConfirm:"Supprimer ce filament ?",importFromPrinter:"Importer de l'imprimante",exportToFile:"Exporter vers fichier"},slice:{title:"Slicer le modèle",action:"Slicer",actionAll:"Slicer les {{count}} plateaux",actionAllTitle:"Slicer tous les plateaux dans une sortie multi-plateaux (une seule archive). La sélection de filament couvre chaque emplacement défini par le projet.",allPlatesToggle:"Slicer les {{count}} plateaux",slicing:"Découpage…",printer:"Profil d'imprimante",process:"Profil de processus",filament:"Profil de filament",filamentSlot:"Filament {{index}} – {{type}}",selectPreset:"— Sélectionner un préréglage —",loadingPresets:"Chargement des préréglages…",analyzingPlateFilaments:"Analyse des filaments de la plaque…",analyzingPlateFilamentsHint:"Exécution d'un découpage d'aperçu pour identifier les emplacements AMS utilisés. Mis en cache après — la réouverture est instantanée.",previewToast:"Analyse de {{name}} – {{elapsed}}",previewWithProgress:"Analyse de {{name}} – {{stage}} ({{percent}} %) – {{elapsed}}",notUsedByPlate:"— non utilisé par cette plaque",noPresetsForSlot:"Aucun préréglage disponible",otherPrinters:"Autres imprimantes",presetsLoadFailed:"Échec du chargement des préréglages. Ouvrez Paramètres → Profils pour les importer d'abord.",refreshPresets:"Actualiser",refreshPresetsTitle:"Actualiser les préréglages — récupérer les dernières listes Cloud et bundle (à utiliser après avoir supprimé un préréglage dans Bambu Studio ou Bambu Handy)",allPresetsRequired:"Tous les préréglages doivent être sélectionnés",bundle:"Pack de découpage",bundleNone:"— Aucun (choisir les préréglages individuellement) —",bundleAllRequired:"Le processus du pack et chaque emplacement de filament doivent être choisis",enqueuing:"Envoi du travail de découpage…",queued:"En file d'attente…",failed:"Échec du découpage. Vérifiez les journaux du sidecar.",startedToast:"Découpage de {{name}} en arrière-plan…",queuedToast:"En attente : {{name}} – {{elapsed}}",runningToast:"Découpage {{name}} – {{elapsed}}",runningWithProgress:"{{name}} – {{stage}} ({{percent}} %) – {{elapsed}}",runningWithProgressMultiPlate:"Plateau {{plateIndex}} sur {{plateCount}} • {{name}} – {{stage}} ({{percent}} %) – {{elapsed}}",completedToast:"{{name}} découpé",failedTitle:"Échec du découpage",failedToast:"Échec du découpage de {{name}} : {{detail}}",tier:{local:"Importé",cloud:"Bambu Cloud",orcaCloud:"Orca Cloud",standard:"Standard"},cloud:{notAuthenticated:"Connectez-vous à Bambu Cloud (Paramètres → Profils → Bambu Cloud) pour voir vos préréglages cloud.",expired:"Session Bambu Cloud expirée – reconnectez-vous pour actualiser vos préréglages cloud.",unreachable:"Bambu Cloud est inaccessible. Les préréglages locaux et standards fonctionnent encore."},orcaCloud:{notAuthenticated:"Connectez-vous à Orca Cloud (Profils → Orca Cloud) pour voir vos préréglages Orca.",expired:"Session Orca Cloud expirée — reconnectez-vous pour actualiser vos préréglages Orca.",unreachable:"Orca Cloud est indisponible pour le moment. Les autres préréglages fonctionnent toujours."},bedType:{label:"Plateau d'impression",auto:"Auto (utiliser le préréglage de processus)",coolPlate:"Cool Plate",coolPlateSuperTack:"Cool Plate SuperTack",engineering:"Engineering Plate",highTemp:"High Temp Plate",texturedPEI:"Textured PEI Plate",smoothPEI:"Smooth PEI Plate"}},spoolman:{title:"Intégration Spoolman",enabled:"Spoolman Activé",url:"URL Spoolman",connected:"Connecté",disconnected:"Non Connecté",testConnection:"Tester connexion",sync:"Synchroniser",syncing:"Sync...",lastSync:"Dernière Sync",linkToSpoolman:"Lier à Spoolman",openInSpoolman:"Ouvrir Spoolman",unlinkSpool:"Délier bobine",unlinkConfirmTitle:"Désassigner la bobine ?",unlinkConfirmMessage:"Cela retirera la bobine de cet emplacement. Les données de la bobine elles-mêmes resteront inchangées.",selectSpool:"Choisir bobine",noUnlinkedSpools:"Pas de bobine libre",linkSuccess:"Bobine assignée avec succès",linkFailed:"Échec de l’assignation",unlinkSuccess:"Bobine désassignée avec succès",unlinkFailed:"Échec du désassignement",linkedSpool:"Bobine assignée",spoolId:"ID Bobine",fillSourceLabel:"(Spoolman)",weight:"Poids",remaining:"Restant",disableWeightSync:"Désactiver Sync poids estimé AMS",disableWeightSyncDesc:"Ne pas utiliser les estimations AMS. Utile si vous préférez le suivi Spoolman.",reportPartialUsage:"Rapporter consommation partielle pour échecs",reportPartialUsageDesc:"Si l'impression échoue, rapporte le filament consommé selon les couches."},inventory:{title:"Inventaire de Bobines",subtitle:"Gérez vos bobines",spoolmanMixedContentTitle:"Spoolman ne peut pas se charger en HTTPS — contenu mixte bloqué par votre navigateur",spoolmanMixedContentBody:"Bambuddy est servi en HTTPS (via votre reverse proxy), mais votre URL Spoolman est encore en HTTP. Les navigateurs bloquent le contenu mixte pour des raisons de sécurité, donc l'interface Spoolman intégrée ne peut pas s'afficher. Spoolman doit être accessible en HTTPS.",spoolmanMixedContentFixReverseProxy:"Placez Spoolman derrière le même reverse proxy que Bambuddy (Traefik / Nginx / Caddy) en HTTPS, puis mettez à jour l'URL Spoolman dans les Paramètres avec la nouvelle adresse HTTPS.",spoolmanMixedContentFixOpenNewTab:"Alternative : ouvrez Spoolman dans un nouvel onglet en HTTP — les règles de contenu mixte ne s'appliquent qu'aux cadres intégrés, un onglet autonome fonctionne.",spoolmanOpenInNewTab:"Ouvrir Spoolman dans un nouvel onglet",labels:{title:"Imprimer étiquettes de bobines",selectedCount:"{{count}} sélectionné",pickSpools:"Choisissez les bobines pour lesquelles imprimer des étiquettes :",searchPlaceholder:"Rechercher par nom, marque ou #ID",filterByMaterial:"Matériau :",allMaterials:"Tout",selectVisible:"Sélectionner tout visible ({{count}})",deselectVisible:"Désélectionner visible",clearAll:"Tout effacer",noSpoolsToShow:"Aucune bobine à afficher. Ajustez votre filtre et réessayez.",noMatches:"Aucune bobine ne correspond à la recherche ou au filtre actuel.",printOne:"Imprimer l'étiquette de cette bobine",printLabels:"Imprimer les étiquettes…",bulkTitle:"Choisissez les bobines à étiqueter parmi les {{count}} affichées",noSpoolsTitle:"Aucune bobine à étiqueter",error:"Impossible de générer les étiquettes : {{msg}}",sortBy:{label:"Trier :",id:"Par ID",color:"Par couleur"},templates:{amsHolderSmall:{label:"Support AMS — petit (74 × 33 mm)",hint:"Une étiquette par page ; correspond à l'étiquette imprimable du modèle MakerWorld 752566 (Support d'étiquettes pour filament AMS)."},amsHolderLarge:{label:"Support AMS — grand (75 × 55 mm)",hint:"Une étiquette par page ; s'adapte à la variante carton du support d'étiquettes pour filament AMS. Assez d'espace pour pastille, marque, matériau, ID et QR code."},box40x30:{label:"Étiquette boîte (40 × 30 mm)",hint:"Une étiquette par page ; taille de rouleau DK/Brother courante, idéale pour étiqueter sachets de filament et bacs de stockage."},box:{label:"Box label (62 × 29 mm)",hint:"Une étiquette par page ; dimensionnée pour Brother PT/QL et petites étiquettes Dymo."},averyL7160:{label:"Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)",hint:"Format de feuille UE ; 21 étiquettes par page A4."},avery5160:{label:"Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)",hint:"Format de feuille US ; 30 étiquettes par page Letter."}}},addSpool:"Ajouter Bobine",editSpool:"Modifier Bobine",copySpool:"Copier Bobine",material:"Matériau",selectMaterial:"Choisir matériau...",subtype:"Sous-type",brand:"Marque",searchBrand:"Chercher marque...",useCustomBrand:'Utiliser "{{brand}}"',useCustomMaterial:"Utiliser un matériau personnalisé : {{material}}",colorName:"Nom de couleur",colorNamePlaceholder:"Blanc Jade, Rouge Feu...",color:"Couleur",hexColor:"Code Hex",pickColor:"Choisir couleur perso",labelWeight:"Poids net",coreWeight:"Poids bobine vide",searchSpoolWeight:"Chercher poids bobine...",weightUsed:"Consommé",currentWeight:"Poids restant",measuredWeight:"Poids mesuré",spoolName:"Bobine",costPerKg:"Coût par kg",storageLocation:"Emplacement de stockage",storageLocationPlaceholder:"ex. Étagère A, Tiroir 1",openInInventory:"Ouvrir dans l'inventaire",measuredWeightError:"Le poids mesuré doit être entre {{min}}g et {{max}}g.",slicerFilament:"Filament Slicer",slicerFilamentName:"Nom du Preset Slicer",slicerPreset:"Preset Slicer",searchPresets:"Chercher presets...",selectedPreset:"Sélectionné",noPresetsFound:"Aucun preset trouvé",tempOverrides:"Exceptions Température",note:"Note",notePlaceholder:"Notes additionnelles sur cette bobine...",category:"Catégorie",categoryPlaceholder:"ex. Production, Prototype, Client A",categoryNone:"Sans catégorie",storageLocationNone:"Aucun emplacement défini",lowStockThresholdOverride:"Seuil bas (cette bobine)",lowStockThresholdOverrideHelp:"Laisser vide pour utiliser le seuil global ({{global}} %).",clearRfid:"Effacer le tag RFID",rfidCleared:"Tag RFID effacé",archive:"Archiver",restore:"Restaurer",noSpools:"Aucune bobine. Ajoutez votre première bobine pour commencer.",noAvailableSpools:"Aucune bobine disponible. Ajoutez une bobine à votre inventaire ou désaffectez-en une d'un autre emplacement.",kProfiles:"Profils K",addKProfile:"Ajouter K-Profile",assignSpool:"Assigner Bobine",unassignSpool:"Désassigner",assignSuccess:"Bobine assignée et slot AMS configuré",assignFailed:"Échec assignation",selectSpool:"Choisir une bobine pour ce slot",assigned:"Assigné",assigning:"Assignation...",searchSpools:"Chercher bobines...",showAllSpools:"Afficher toutes les bobines",spoolmanSpools:"Bobines Spoolman",allMaterials:"Tous Matériaux",filterByBrand:"Filtrer par marque...",showArchived:"Afficher archivées",quickAdd:"Ajout rapide (Stock)",quantity:"Quantité",stock:"Stock",configured:"Configuré",spoolsCreated:"{{count}} bobines créées",spoolsPartiallyCreated:"{{created}} sur {{total}} bobines créées (certaines ont échoué)",spoolCreated:"Bobine créée",spoolUpdated:"Bobine mise à jour",spoolDeleted:"Bobine supprimée",deepLinkSpoolNotFound:"Bobine introuvable",deepLinkFetchFailed:"Impossible de charger la bobine — réessayez",spoolArchived:"Bobine archivée",spoolRestored:"Bobine restaurée",kProfileSaveFailed:"Les paramètres de profil K n'ont pas pu être enregistrés",syncWeightSpoolNotFound:"Bobine introuvable — elle a peut-être été supprimée",syncWeightSpoolmanUnreachable:"Spoolman est inaccessible — réessayez plus tard",syncWeightFailed:"Échec de la synchronisation du poids",spoolmanUnreachable:"Spoolman est inaccessible — veuillez réessayer plus tard",deleteSpoolNotFound:"Bobine introuvable — elle a peut-être déjà été supprimée",deleteFailed:"Impossible de supprimer la bobine",archiveSpoolNotFound:"Bobine introuvable — elle a peut-être déjà été supprimée",archiveFailed:"Impossible d'archiver la bobine",restoreSpoolNotFound:"Bobine introuvable — elle a peut-être déjà été supprimée",restoreFailed:"Impossible de restaurer la bobine",saveFailed:"Impossible d'enregistrer les modifications",tagClearFailed:"Impossible de supprimer le tag",deleteConfirm:"Supprimer définitivement cette bobine ?",archiveConfirm:"Voulez-vous vraiment archiver cette bobine ?",advancedSettings:"Paramètres Avancés",filamentInfoTab:"Infos Filament",paProfileTab:"Profil PA",filamentInfo:"Filament",additional:"Additionnel",loadingPresets:"Chargement des presets cloud...",cloudConnected:"Cloud connecté",cloudNotConnected:"Cloud déconnecté (valeurs par défaut)",recentColors:"Récentes",searchColors:"Chercher couleurs...",searchResults:"Résultats",allColors:"Toutes",commonColors:"Communes",showLess:"Moins",showAll:"Toutes",noColorsFound:"Aucune couleur correspondante",noResults:"Aucun résultat",extraColorsLabel:"Couleurs supplémentaires",extraColorsPlaceholder:"EC984C,#6CD4BC,A66EB9,D87694",extraColorsHint:"Collez 2 à 8 stops hex, séparés par des virgules. Affiché en dégradé.",extraColorsInvalid:"Hex non valides ignorés : {{tokens}}",colorEffectLabel:"Effet",colorEffect:{none:"Aucun",sparkle:"Pailleté",wood:"Bois",marble:"Marbre",glow:"Lueur",matte:"Mat",silk:"Soie",galaxy:"Galaxie",rainbow:"Arc-en-ciel",metal:"Métal",translucent:"Translucide",gradient:"Dégradé",dualColor:"Bicolore",triColor:"Tricolore",multicolor:"Multicolore"},selectMaterialFirst:"Veuillez choisir un matériau dans l'onglet Infos Filament.",noPrintersConfigured:"Ajoutez une imprimante pour utiliser les profils PA.",matchingFilter:"Correspondant",anyBrand:"Toute marque",anyVariant:"Toute variante",autoSelect:"Auto-sélection",matches:"correspondances",match:"correspondance",noMatches:"Aucune correspondance",connected:"Connecté",offline:"Hors ligne",printerOffline:"Imprimante hors ligne. Connectez-vous pour voir les profils.",noKProfilesMatch:"Aucun profil K ne correspond au filament.",leftNozzle:"Buse Gauche",rightNozzle:"Buse Droite",profilesSelected:"profil(s) de calibration sélectionné(s)",totalInventory:"Total Inventaire",totalConsumed:"Total Consommé",byMaterial:"Par Matériau",inPrinter:"Dans Imprimante",lowStock:"Stock Bas",sinceTracking:"Depuis le début du suivi",resetConsumedCounter:"Réinitialiser le compteur",resetConsumedCounterTooltip:"Remettre à zéro le compteur de grammes consommés pour cette bobine. Le poids restant n'est pas modifié.",resetConsumedCounterConfirm:"Remettre à 0 le compteur de grammes consommés de cette bobine ? Les futures impressions repartiront de zéro. La bobine, son calcul de poids restant et vos paramètres ne sont pas modifiés.",resetAllConsumedCounters:"Réinitialiser tous les compteurs",resetAllConsumedCountersTooltip:"Remettre à zéro le compteur de grammes consommés sur chaque bobine. Les poids restants ne sont pas modifiés.",resetAllConsumedCountersConfirm:"Remettre à 0 le compteur de grammes consommés sur les {{count}} bobines (archivées incluses) ? Cela efface la valeur « Total Consommé » pour que les futures impressions repartent de zéro. Les bobines et les poids restants ne sont pas modifiés.",consumedCounterReset:"Compteur réinitialisé",allConsumedCountersReset:"Compteur réinitialisé pour {{count}} bobine(s)",resetConsumedCounterFailed:"Échec de la réinitialisation du compteur",loadedInAms:"Chargé dans AMS/Ext",remaining:"Restant",weightCheck:"Vérification poids",lastWeighed:"Dernière pesée",neverWeighed:"Jamais pesé",search:"Chercher bobines...",showing:"Affichage",to:"à",of:"sur",show:"Voir",spools:"bobines",spool:"bobine",page:"Page",noSpoolsMatch:"Aucun résultat trouvé",noSpoolsMatchDesc:"Ajustez votre recherche ou vos filtres.",active:"Actif",archived:"Archivé",all:"Tous",used:"Occasion",new:"Neuf",clearFilters:"Effacer filtres",table:"Tableau",cards:"Cartes",net:"Réseau",groupSimilar:"Grouper",groupedSpools:"{{count}} bobines identiques",groupedRows:"lignes",columns:"Colonnes",configureColumns:"Configurer Colonnes",configureColumnsDesc:"Glissez pour ordonner ou utilisez les flèches. Cliquez sur l'œil pour masquer.",visible:"visible",reset:"Réinitialiser",cancel:"Annuler",applyChanges:"Appliquer",moveUp:"Monter",moveDown:"Descendre",hideColumn:"Masquer",showColumn:"Afficher",linkToSpool:"Lier à une Bobine",tagLinked:"Tag lié à la bobine",tagLinkFailed:"Échec lien tag",tagAlreadyLinked:"Tag déjà lié à une autre bobine",unknownTag:"Tag RFID inconnu détecté",usageHistory:"Historique de Consommation",noUsageHistory:"Aucune consommation enregistrée",printName:"Nom Impression",weightConsumed:"Poids consommé",clearHistory:"Effacer",historyCleared:"Historique effacé",fillSourceLabel:"(Inv)",lowStockThresholdError:"Le seuil doit être compris entre 0.1 et 99.9",assignMismatchTitle:"Incompatibilité de matériau",assignMismatchMessage:'Le matériau de la bobine sélectionnée "{{spoolMaterial}}" ne correspond pas au matériau du plateau "{{trayMaterial}}" pour {{location}}. Assigner quand même ?',assignMismatchConfirm:"Assigner quand même",assignPartialMismatchMessage:'Le matériau de la bobine "{{spoolMaterial}}" est similaire, mais ne correspond pas exactement à "{{trayMaterial}}" dans {{location}}. Voulez-vous continuer ?',assignProfileMismatchMessage:'Le profil de la bobine "{{spoolProfile}}" ne correspond pas au profil du plateau "{{trayProfile}}" dans {{location}}. Voulez-vous continuer ?',assignReconfigureNote:"Le slot AMS sera reconfiguré pour utiliser le profil de la bobine.",spoolmanFilamentCatalog:"Catalogue de filaments Spoolman",pickFromSpoolmanCatalog:"Choisir dans le catalogue Spoolman…",spoolmanFilamentSelected:"Filament sélectionné depuis le catalogue Spoolman",spoolmanFilamentUnlinked:"Lien avec le catalogue de filaments supprimé",noSpoolmanFilaments:"Aucun filament trouvé dans le catalogue Spoolman",spoolmanFilamentColorSwatch:"Couleur du filament",spoolWeightManagedBySpoolman:"Le poids de la bobine vide est géré par type de filament dans Spoolman",spoolmanCatalogLoadFailed:"Impossible de charger le catalogue Spoolman"},timelapse:{title:"Time-lapse",create:"Créer Timelapse",download:"Télécharger",delete:"Supprimer",preview:"Aperçu",frameRate:"Images/sec",quality:"Qualité",processing:"Traitement...",noTimelapses:"Aucun timelapse"},ams:{title:"AMS",slot:"Emplacement",empty:"Vide",emptySlot:"Slot vide",slotEmpty:"Vide",emptySlotReset:"Aucune bobine assignée",unknown:"Inconnu",humidity:"Humidité",temperature:"Température",filamentType:"Type filament",filamentColor:"Couleur",remaining:"Restant",history:"Historique AMS",noHistory:"Aucun historique",configureSlot:"Configurer Slot",externalSpool:"Bobine externe",profile:"Profil",kFactor:"Facteur K",fill:"Remplir",configure:"Configurer",used:"utilisé",remainingUnit:"restant"},printModal:{title:"Lancer l'impression",selectPrinter:"Choisir l'imprimante",selectPlate:"Choisir le plateau",filamentMapping:"Mapping Filament",totalCost:"Coût total :",slotRemainingShort:" - {{grams}}g rest.",printSettings:"Réglages d'impression",bedLeveling:"Nivellement plateau",flowCalibration:"Calibration débit",vibrationCalibration:"Vibration (Input Shaper)",layerInspection:"Inspection 1ère couche",timelapse:"Time-lapse",startPrint:"Démarrer",addToQueue:"Ajouter à la file",cancel:"Annuler",noPrintersAvailable:"Aucune imprimante disponible",printerBusy:"L'imprimante est occupée",printerOffline:"L'imprimante est hors ligne",sameTypeDifferentColor:"Même type, couleur différente",filamentTypeNotLoaded:"Type de filament non chargé",openCalendar:"Ouvrir calendrier",leftNozzle:"G",rightNozzle:"D",leftNozzleTooltip:"Buse gauche",rightNozzleTooltip:"Buse droite",filamentOverride:"Remplacement de filament",filamentOverrideHint:"Remplacez optionnellement les filaments pour l'affectation par modèle. Le planificateur utilisera vos filaments sélectionnés au lieu des valeurs 3MF d'origine.",originalFilament:"Original",overrideWith:"Remplacer par",resetToOriginal:"Revenir à l'original",insufficientFilamentTitle:"Filament insuffisant",insufficientFilamentMessage:"Certaines bobines assignées ont moins de filament restant que nécessaire pour cette impression :",insufficientFilamentLine:"{{printer}} - {{slot}} : nécessite {{required}}g, restant {{remaining}}g",printAnyway:"Imprimer quand même",forceColorMatch:"Forcer correspondance des couleurs",staggerPrinterStarts:"Échelonner démarrages",staggerGroupSize:"Taille du groupe",staggerInterval:"Intervalle (min)",staggerPreview:"{{printers}} imprimantes → {{groups}} groupes de {{size}}, démarrage toutes les {{interval}} min",staggerLastGroup:"dernier groupe : {{count}}",staggerTotal:"total : {{minutes}} min",staggerToPrinters:"Échelonner sur {{count}} imprimantes",gcodeInjection:"Injecter le G-code auto-impression"},backup:{includesEncryptionKey:"Les sauvegardes locales incluent le fichier de clé de chiffrement MFA (DATA_DIR/.mfa_encryption_key), donc un ZIP de sauvegarde est autonome. Traitez le ZIP comme sensible — quiconque possède le fichier peut déchiffrer les secrets client OIDC et TOTP qu'il contient.",title:"Sauvegarde & Restauration",createBackup:"Créer Sauvegarde",restoreBackup:"Restaurer Sauvegarde",restoreDescription:"Remplace les données par un fichier de sauvegarde",downloadBackup:"Télécharger Sauvegarde",uploadBackup:"Téléverser Sauvegarde",lastBackup:"Dernière sauvegarde",autoBackup:"Sauvegarde auto",backupNow:"Sauvegarder maintenant",restoreWarning:"Attention : Écrase TOUTES les données actuelles.",includeArchives:"Inclure Archives",includeSettings:"Inclure Paramètres",includeProfiles:"Inclure Profils",backupSuccess:"Sauvegarde réussie",restoreSuccess:"Restauration réussie",backupFailed:"Échec sauvegarde",restoreFailed:"Échec restauration",restoreNote:"L'imprimante virtuelle sera arrêtée pendant la restauration",githubBackup:"Sauvegarde GitHub",enabled:"Activé",cloudLoginRequired:"Connexion Bambu Cloud requise. Connectez-vous sous Profils → Profils Cloud pour activer la sauvegarde GitHub.",cloudLoginRequiredShort:"Connexion Cloud requise",githubDescription:"Synchronisez automatiquement vos profils vers un dépôt GitHub privé pour la sauvegarde et l'historique des versions.",repoIsPrivate:"Le dépôt est privé — la sauvegarde peut s'y faire en toute sécurité.",repoIsPublicWarning:"Le dépôt est PUBLIC. Les sauvegardes Bambuddy contiennent les identifiants MQTT, les jetons Home Assistant, les jetons Prometheus, votre adresse Bambu Cloud, et les codes d'accès des imprimantes via les K-profils. L'enregistrement est bloqué tant que le dépôt n'est pas passé en privé dans les paramètres de votre hébergeur.",repoVisibilityUnknown:"Impossible de déterminer la visibilité du dépôt. Bambuddy refuse toute sauvegarde vers un dépôt non confirmé privé ; l'enregistrement sera bloqué.",repositoryUrl:"URL du dépôt",repoUrlPlaceholderGitHub:"https://github.com/username/repo-name",repoUrlPlaceholderGitea:"https://gitea.example.com/username/repo-name",repoUrlPlaceholderForgejo:"https://forgejo.example.com/username/repo-name",repoUrlPlaceholderGitLab:"https://gitlab.com/username/repo-name",allowInsecureHttp:"Autoriser HTTP non sécurisé",allowInsecureHttpHint:"Activer pour les instances auto-hébergées sur des réseaux privés sans TLS",personalAccessToken:"Jeton d'accès personnel",tokenSaved:"(enregistré)",enterNewToken:"Entrez un nouveau jeton pour mettre à jour",tokenHint:"Jeton à granularité fine avec permission de lecture/écriture du contenu",branch:"Branche",provider:"Fournisseur Git",providerGitHub:"GitHub",providerGitLab:"GitLab",providerGitea:"Gitea",providerForgejo:"Forgejo",manualOnly:"Manuel uniquement",hourly:"Toutes les heures",daily:"Quotidien",weekly:"Hebdomadaire",includeInBackup:"Inclure dans la sauvegarde",kProfiles:"K-Profils",kProfilesDescription:"Calibration de l'avance de pression des imprimantes connectées",noPrintersConnected:"Aucune imprimante connectée",printersConnected:"{{connected}}/{{total}} connectées",cloudProfiles:"Profils Cloud",cloudProfilesDescription:"Préréglages de filament, imprimante et processus depuis Bambu Cloud",appSettings:"Paramètres de l'application",appSettingsDescription:"Configuration Bambuddy (base de données complète)",spoolInventory:"Inventaire des bobines",spoolInventoryDescription:"Bobines de filament, historique d'utilisation et suivi des coûts",printArchives:"Archives d'impression",printArchivesDescription:"Métadonnées de l'historique d'impression (pas de fichiers gcode/3MF)",lastBackupAt:"Dernière sauvegarde :",noBackupsYet:"Aucune sauvegarde pour l'instant",next:"Prochaine :",startingBackup:"Démarrage de la sauvegarde...",test:"Tester",enableBackup:"Activer la sauvegarde",testConnection:"Tester la connexion",enterRepoUrl:"Entrez l'URL du dépôt",enterRepoAndToken:"Entrez l'URL du dépôt et le jeton d'accès",repoRequired:"L'URL du dépôt est requise",tokenRequired:"Le jeton d'accès est requis",githubBackupEnabled:"Sauvegarde GitHub activée",tokenUpdated:"Jeton mis à jour",settingsSaved:"Paramètres enregistrés",failedToSave:"Échec de l'enregistrement : {{message}}",backupCompleteFiles:"Sauvegarde terminée - {{count}} fichiers mis à jour",backupSkippedNoChanges:"Sauvegarde ignorée - aucun changement",backupFailed2:"Échec de la sauvegarde : {{message}}",clearedLogs:"{{count}} journaux supprimés",failedToClearLogs:"Échec de la suppression des journaux : {{message}}",history:"Historique",clear:"Effacer",date:"Date",status:"Statut",commit:"Commit",localBackup:"Sauvegarde locale",localBackupDescription:"Créez une sauvegarde complète de vos données Bambuddy incluant la base de données, les archives, les téléchargements et tous les fichiers.",downloadBackupLabel:"Télécharger la sauvegarde",completeBackupZip:"Sauvegarde complète : base de données + tous les fichiers (ZIP)",download:"Télécharger",preparingBackup:"Préparation de la sauvegarde...",creatingArchive:"Création de l'archive de sauvegarde... Cela peut prendre un moment pour les archives volumineuses.",downloadingFile:"Téléchargement du fichier de sauvegarde...",backupDownloaded:"Sauvegarde téléchargée avec succès",failedToCreateBackup:"Échec de la création de la sauvegarde : {{message}}",restore:"Restaurer",restoreReplacesAll:"La restauration remplace toutes les données.",restoreReplacesAllDetail:"Votre base de données et vos fichiers actuels seront complètement remplacés. Un redémarrage est nécessaire après la restauration.",restoreConfirmTitle:"Restaurer la sauvegarde",restoreConfirmMessage:`Êtes-vous sûr de vouloir restaurer depuis "{{filename}}" ? Cela remplacera complètement votre base de données et tous vos fichiers. L'application devra être redémarrée après la restauration.`,restoreConfirmButton:"Restaurer la sauvegarde",uploadingFile:"Téléchargement du fichier de sauvegarde...",backupRestoredRestart:"Sauvegarde restaurée. Veuillez redémarrer Bambuddy.",failedToRestore:"Échec de la restauration. Veuillez vérifier le format du fichier.",reloadNow:"Recharger maintenant",creatingBackup:"Création de la sauvegarde",restoringBackup:"Restauration de la sauvegarde",preparing:"Préparation...",processing:"Traitement...",doNotClosePage:"Veuillez ne pas fermer cette page ni naviguer ailleurs. Cette opération peut prendre plusieurs minutes pour les sauvegardes volumineuses.",restoring:"Restauration...",restoreComplete:"Restauration terminée",restoreFailed2:"Échec de la restauration",importSettings:"Importer les paramètres depuis un fichier de sauvegarde",pleaseWaitRestoring:"Veuillez patienter pendant la restauration de vos données",selectBackupFile:"Cliquez pour sélectionner un fichier de sauvegarde (.json ou .zip)",duplicateHandling:"Comment fonctionne la gestion des doublons :",matchPrinters:"Imprimantes",matchPrintersBy:"correspondance par numéro de série",matchSmartPlugs:"Prises connectées",matchSmartPlugsBy:"correspondance par adresse IP",matchNotificationProviders:"Fournisseurs de notifications",matchNotificationProvidersBy:"correspondance par nom",matchFilaments:"Filaments",matchFilamentsBy:"correspondance par nom + type + marque",matchArchives:"Archives",matchArchivesBy:"correspondance par hash de contenu (toujours ignoré)",matchPendingUploads:"Téléchargements en attente",matchPendingUploadsBy:"correspondance par nom de fichier",matchSettingsTemplates:"Paramètres et modèles",matchSettingsTemplatesBy:"toujours écrasés",replaceExisting:"Remplacer les données existantes",keepExisting:"Conserver les données existantes",overwriteDescription:"Écraser les éléments qui existent déjà avec les données de sauvegarde",keepDescription:"Restaurer uniquement les éléments qui n'existent pas encore",overwriteCaution:"Attention :",overwriteWarning:"L'écrasement remplacera vos configurations actuelles par les données de la sauvegarde. Les codes d'accès des imprimantes ne sont jamais écrasés pour des raisons de sécurité.",cancel:"Annuler",processingBackup:"Traitement du fichier de sauvegarde...",itemsRestored:"Éléments restaurés",itemsSkipped:"Éléments ignorés",restored:"Restaurés",skippedAlreadyExist:"Ignorés (existent déjà)",filesCategory:"Fichiers (3MF, miniatures, etc.)",andMore:"...et {{count}} de plus",newApiKeysGenerated:"Nouvelles clés API générées",keysShownOnce:"Ces clés ne sont affichées qu'une seule fois. Copiez-les maintenant !",copy:"Copier",noDataFound:"Aucune donnée à restaurer n'a été trouvée dans le fichier de sauvegarde.",close:"Fermer",scheduledBackup:"Sauvegardes planifiées",scheduledBackupDescription:"Crée automatiquement des instantanés de sauvegarde selon un planning. Le répertoire de sortie peut être monté sur un NAS ou un stockage externe.",frequency:"Fréquence",backupTime:"Temps",retention:"Rétention",retentionDescription:"Nombre de sauvegardes à conserver",outputPath:"Chemin de sortie",outputPathPlaceholder:"Par défaut : {{path}}",outputPathDescription:"Laisser vide pour l'emplacement par défaut",runNow:"Exécuter maintenant",backupFiles:"Fichiers de sauvegarde",noScheduledBackups:"Aucune sauvegarde",deleteBackup:"Supprimer",deleteBackupConfirm:"Supprimer ce fichier de sauvegarde ?",backupRunning:"Sauvegarde en cours...",scheduledBackupComplete:"Sauvegarde terminée avec succès",scheduledBackupFailed:"Échec de la sauvegarde",nextBackup:"Prochaine sauvegarde",backupSize:"Taille",localTimeHint:"Heure locale ({{tz}})",defaultPathLabel:"Par défaut :",categories:{settings:"Paramètres",notification_providers:"Fournisseurs de notifications",notification_templates:"Modèles de notifications",smart_plugs:"Prises connectées",printers:"Imprimantes",filaments:"Filaments",maintenance_types:"Types de maintenance",archives:"Archives",projects:"Projets",pending_uploads:"Téléchargements en attente",external_links:"Liens externes",api_keys:"Clés API"}},tags:{title:"Étiquettes",addTag:"Ajouter Tag",editTag:"Modifier Tag",deleteTag:"Supprimer Tag",tagName:"Nom du Tag",tagColor:"Couleur du Tag",noTags:"Aucun tag",deleteConfirm:"Supprimer ce tag ?",manageTags:"Gérer les Tags"},uploadModal:{title:"Téléverser des fichiers 3MF",dragDrop:"Glissez les fichiers .3mf ici",or:"ou",browseFiles:"Parcourir",extractionInfo:"Le modèle d'imprimante est extrait des métadonnées 3MF.",uploaded:"téléversé",failed:"échoué",uploading:"En cours...",upload:"Téléverser",uploadFailed:"Échec du téléversement"},editArchive:{title:"Modifier l'archive",name:"Nom",namePlaceholder:"Nom de l'impression",printer:"Imprimante",noPrinter:"Aucune imprimante",project:"Projet",noProject:"Aucun projet",itemsPrinted:"Nombre de pièces",itemsPrintedHelp:"Nombre d'objets produits",notes:"Notes",notesPlaceholder:"Notes sur l'impression...",externalLink:"Lien externe",externalLinkPlaceholder:"https://...",externalLinkHelp:"Lien vers Printables, Thingiverse, etc.",tags:"Étiquettes",tagsPlaceholder:"Ajouter des tags...",addMoreTags:"Plus de tags...",matchingTags:'Correspondant à "{{query}}"',existingTags:"Tags existants",clickToAdd:"(cliquer pour ajouter)",status:"Statut",failureReason:"Raison de l'échec",selectReason:"Choisir raison...",photos:"Photos du résultat",photosHelp:"Cliquez sur + pour ajouter des photos",printResult:"Résultat d'impression",saving:"Enregistrement...",failureReasons:{adhesionFailure:"Défaut d'adhésion",spaghettiDetached:"Spaghetti / Détaché",layerShift:"Décalage de couche",cloggedNozzle:"Buse bouchée",filamentRunout:"Filament fini",warping:"Warping (Déformation)",stringing:"Stringing (Cheveux d'ange)",underExtrusion:"Sous-extrusion",powerFailure:"Coupure courant",userCancelled:"Annulé par l'utilisateur",other:"Autre"},statuses:{completed:"Réussie",failed:"Échouée",aborted:"Annulée",printing:"Impression"}},kProfiles:{title:"Profils K",noPrintersConfigured:"Aucune imprimante configurée",addPrinterInSettings:"Ajoutez une imprimante pour gérer les K-profiles",noActivePrinters:"Aucune imprimante active",enablePrinterConnection:"Activez la connexion pour voir les K-profiles",loadingProfiles:"Chargement des K-Profiles...",printerOffline:"Imprimante hors ligne",printerOfflineDesc:"L'imprimante doit être allumée.",noMatchingProfiles:"Aucun profil correspondant",noMatchingProfilesDesc:"Ajustez votre recherche",noKProfiles:"Aucun K-Profile",noKProfilesDesc:"Aucun profil trouvé pour une buse de {{diameter}}mm",createFirstProfile:"Créer le premier profil",printer:"Imprimante",nozzle:"Buse",refresh:"Rafraîchir",addProfile:"Ajouter Profil",export:"Exporter",import:"Importer",select:"Choisir",selectAll:"Tout sélectionner",delete:"Supprimer",searchPlaceholder:"Nom ou filament...",allExtruders:"Tous les extrudeurs",leftOnly:"Gauche uniquement",rightOnly:"Droite uniquement",allFlow:"Tout débit",hfOnly:"HF uniquement",sOnly:"S uniquement",sortName:"Tri : Nom",sortKValue:"Tri : Valeur K",sortFilament:"Tri : Filament",leftExtruder:"Extrudeur gauche",rightExtruder:"Extrudeur droit",modal:{addTitle:"Ajouter K-Profile",editTitle:"Modifier K-Profile",profileName:"Nom du profil",profileNamePlaceholder:"ex: Mon profil PLA",kValue:"Valeur K",kValuePlaceholder:"0.020",kValueHelp:"Plage type : 0.01-0.06 (PLA), 0.02-0.10 (PETG)",filament:"Filament",selectFilament:"Choisir filament...",noFilamentsHelp:"Créez d'abord un profil dans Bambu Studio.",flowType:"Type de débit",highFlow:"Haut Débit (HF)",standard:"Standard",nozzleSize:"Taille buse",extruder:"Extrudeur",extruders:"Extrudeurs",left:"Gauche",right:"Droite",notes:"Notes (locales)",notesPlaceholder:"Notes sur ce profil...",notesHelp:"Enregistré dans Bambuddy, pas sur l'imprimante",syncing:"Sync avec l'imprimante...",savingExtruder:"Sauvegarde extrudeur {{current}}/{{total}}...",pleaseWait:"Patientez..."},deleteConfirm:{title:"Supprimer profil",cannotUndo:"Action irréversible",message:`Supprimer "{{name}}" de l'imprimante ?`},bulkDelete:{title:"Supprimer les profils",cannotUndo:"Action irréversible",message:"Supprimer les {{count}} profils de l'imprimante ?"},toast:{profileSaved:"Profil K enregistré",profilesSaved:"Profil K enregistré sur {{count}} extrudeur(s)",selectAtLeastOneExtruder:"Sélectionnez un extrudeur",profileDeleted:"Profil K supprimé",profilesDeleted:"{{count}} profils supprimés",exportedProfiles:"{{count}} profils exportés",importedProfiles:"{{count}} sur {{total}} profils importés",noProfilesToExport:"Rien à exporter",invalidFileFormat:"Format invalide",failedToParseImport:"Échec analyse fichier",failedToSaveBatch:"Échec enregistrement groupé",noteSaved:"Note enregistrée",failedToSaveNote:"Échec note"},permission:{noRead:"Pas d'autorisation lecture",noCreate:"Pas d'autorisation création",noUpdate:"Pas d'autorisation mise à jour",noDelete:"Pas d'autorisation suppression",noExport:"Pas d'autorisation export",noImport:"Pas d'autorisation import"}},virtualPrinter:{title:"Imprimante Virtuelle",running:"En cours",stopped:"Arrêtée",description:{default:"Active une imprimante qui apparaît dans Bambu Studio. Les fichiers envoyés sont archivés sans impression.",proxy:"Active un proxy qui relaie le trafic vers une imprimante réelle, permettant l'impression à distance."},enable:{title:"Activer l'imprimante virtuelle",visibleInSlicer:'Visible comme "Bambuddy" dans le Slicer',proxyingTo:"Proxy vers {{name}}",notActive:"Inactive"},model:{title:"Modèle d'imprimante",description:"Choisissez le modèle à émuler.",restartWarning:"Changer le modèle redémarrera le service"},accessCode:{title:"Code d'accès",isSet:"Code défini",notSet:"Code requis pour activer",placeholder:"Code 8 char",placeholderChange:"Entrez nouveau code",hint:"Exactement 8 caractères. Sert à l'auth du Slicer.",charCount:"({{count}}/8)"},targetPrinter:{title:"Imprimante cible",configured:"Cible configurée",notConfigured:"Imprimante requise pour mode Proxy",placeholder:"Choisir imprimante...",hint:"L'imprimante doit être en mode LAN.",noPrinters:"Ajoutez une imprimante réelle d'abord."},remoteInterface:{title:"Exception Interface Réseau",configured:"Override actif",optional:"Optionnel - si IP auto est fausse (VPN, Docker, multi-NIC).",placeholder:"Auto (défaut)...",hint:"Force l'IP annoncée via SSDP."},mode:{title:"Mode",archive:"Archiver",archiveDesc:"Archive immédiatement",review:"Revue",reviewDesc:"Attendre revue avant archive",queue:"File",queueDesc:"Archiver et ajouter à la file",proxy:"Proxy",proxyDesc:"Relais vers imprimante réelle"},autoDispatch:{title:"Lancement automatique",description:"Lancer automatiquement les impressions ajoutées à la file. Désactivé, les impressions attendent un lancement manuel."},queueForceColorMatch:{title:"Forcer la correspondance des couleurs",description:"Refuser l'envoi vers une imprimante qui n'a pas exactement le type de filament et la couleur chargés. Désactivé par défaut — sans cela, la file d'attente utilise uniquement la correspondance par modèle et peut choisir une imprimante avec la mauvaise couleur."},tailscaleDisabled:{title:"Intégration Tailscale",description:"Activez pour marquer ce VP comme exposé via Tailscale. Affiche l'adresse Tailscale de l'hôte pour que vous sachiez quelle IP coller dans le slicer. L'étape d'import CA est inchangée — cette bascule n'a aucun effet sur les certificats."},setupRequired:{title:"Configuration requise",description:"Nécessite des réglages système (ports, pare-feu).",readGuide:"Lire le guide de configuration"},howItWorks:{title:"Fonctionnement",step1:"Sur le même LAN, les imprimantes virtuelles apparaissent automatiquement dans votre slicer (Bambu Studio / OrcaSlicer). Depuis d'autres réseaux, ajoutez-les manuellement par adresse IP et code d'accès.",step2:`En mode Archive, Revue et File d'attente, utilisez le bouton "Envoyer" dans votre slicer pour envoyer des fichiers 3MF à Bambuddy. Le slicer affichera "Impression réussie" — le fichier est stocké, pas imprimé.`,step3:"En mode Proxy, l'imprimante virtuelle relaie tout le trafic vers une vraie imprimante — les impressions démarrent immédiatement comme en connexion directe."},status:{title:"Détails du statut",printerName:"Nom",model:"Modèle",serialNumber:"Série",mode:"Mode",pendingFiles:"Fichiers en attente",targetPrinter:"Cible",ftpPort:"Port FTP",mqttPort:"Port MQTT",ftpConnections:"Connexions FTP",mqttConnections:"Connexions MQTT"},toast:{updated:"Réglages virtuels mis à jour",failedToUpdate:"Échec mise à jour",copyFailed:"Échec de la copie — veuillez sélectionner le texte manuellement",accessCodeRequired:"Code d'accès requis",targetPrinterRequired:"Imprimante cible requise",bindIpRequired:"Veuillez d'abord définir une adresse IP",accessCodeEmpty:"Le code ne peut pas être vide",accessCodeLength:"Le code doit faire 8 caractères",created:"Imprimante virtuelle créée",failedToCreate:"Échec de la création de l'imprimante virtuelle",deleted:"Imprimante virtuelle supprimée",failedToDelete:"Échec de la suppression de l'imprimante virtuelle"},list:{title:"Imprimantes virtuelles",add:"Ajouter",addFirst:"Ajouter une imprimante virtuelle",empty:"Aucune imprimante virtuelle configurée. Ajoutez-en une pour commencer."},bindIp:{title:"Interface réseau",placeholder:"Sélectionner interface...",hint:"Interface réseau sur laquelle cette imprimante virtuelle écoute. Doit être unique par imprimante."},proxy:{accessCodeHint:"En mode proxy, utilisez le code d'accès de l'imprimante cible dans le slicer. La connexion est transmise de manière transparente à l'imprimante réelle."},addDialog:{title:"Ajouter une imprimante virtuelle",name:"Nom",hint:"Vous pourrez configurer le code d'accès, l'imprimante cible et d'autres paramètres après la création.",create:"Créer"},deleteConfirm:{title:"Supprimer l'imprimante virtuelle",message:'Êtes-vous sûr de vouloir supprimer "{{name}}" ? Cela arrêtera tous les services de cette imprimante.'},archiveNameSource:{title:"Source du nom d'archive",description:`Choisissez comment les nouvelles archives sont nommées lorsque les fichiers arrivent via l'imprimante virtuelle. "Métadonnées" utilise le titre intégré par le slicer dans le 3MF (par défaut). "Nom de fichier" utilise le nom envoyé par Bambu Studio en FTP — pratique si vous avez renommé le job dans la boîte "envoyer à l'imprimante".`,metadata:"Métadonnées",filename:"Nom de fichier"},caCert:{title:"Certificat du slicer",description:"Les imprimantes virtuelles utilisent un certificat TLS signé par l'autorité de certification Bambuddy. Importez ce certificat CA dans le magasin de confiance de votre slicer une seule fois pour qu'il accepte la connexion — plus besoin de le copier depuis la ligne de commande.",copy:"Copier",copied:"Copié",download:"Télécharger",fingerprint:"SHA-256"}},modelViewer:{openInSlicer:"Ouvrir dans le Slicer",tabs:{model:"Modèle 3D",gcode:"Aperçu G-code"},notAvailable:"indisponible",notSliced:"pas découpé",plates:"Plateaux",allPlates:"Tous les plateaux",plateNumber:"Plateau {{number}}",plateCount:"{{count}} plateau",plateCount_other:"{{count}} plateaux",objectCount:"{{count}} objet",objectCount_other:"{{count}} objets",filamentCount:"{{count}} filament",filamentCount_other:"{{count}} filaments",eta:"Fin {{minutes}} min",noPreview:"Aucun aperçu pour ce fichier",pagination:{pageOf:"Page {{current}} sur {{total}}",prev:"Préc",next:"Suiv"},errors:{failedToLoad:"Échec chargement fichier",noMeshes:"Aucun maillage trouvé dans le 3MF",unsupportedFormat:"Format non supporté"}},maintenanceDescriptions:{lubricateCarbonRods:"Appliquer du lubrifiant sur les tiges carbone pour un mouvement fluide",lubricateRails:"Appliquer du lubrifiant sur les rails linéaires",cleanNozzle:"Nettoyer buse et hotend anti-bouchage",checkBelts:"Tension des courroies pour la précision",cleanBuildPlate:"Nettoyage plateau pour l'adhésion",checkExtruder:"Usure des engrenages de l'extrudeur",checkCooling:"Bon fonctionnement des ventilateurs",generalInspection:"Inspection générale de la machine",cleanCarbonRods:"Nettoyer les tiges carbone (friction)",lubricateSteelRods:"Appliquer du lubrifiant sur les tiges en acier pour un mouvement fluide",cleanSteelRods:"Nettoyer les tiges en acier (friction)",cleanLinearRails:"Essuyer les rails linéaires (poussière/débris)",checkPtfeTube:"Usure ou dommage du tube PTFE",replaceHepaFilter:"Filtre HEPA pour la qualité de l'air",replaceCarbonFilter:"Filtre charbon actif (odeurs)",lubricateLeftNozzleRail:"Lubrifier le rail de buse gauche (Série H2)"},smartPlugs:{offline:"Hors ligne",admin:"Administrateur",openPlugAdminPage:"Page admin de la prise",deleteSmartPlug:"Supprimer la prise",turnOnSmartPlug:"Allumer la prise",turnOffSmartPlug:"Éteindre la prise",turnOn:"Allumer",turnOff:"Éteindre",addSmartPlug:{scanningNetwork:"Scan réseau...",chooseEntity:"Choisir une entité...",connectionFailed:"Échec connexion",searchEntities:"Chercher entités...",searchPowerSensors:"Capteurs puissance...",searchEnergySensors:"Capteurs énergie...",placeholders:{plugName:"Prise Salon",mqttStateOnValue:"ON, true, 1",mqttSameAsPower:"Identique au topic puissance, ou différent"}},linkedTo:"Lié à :",monitorOnly:"Surveillance uniquement",alerts:"Alertes",scheduleOn:"À {{time}}",scheduleOff:"Désactivé {{time}}",on:"On",off:"Désactivé",power:"Puissance",kwhToday:"kWh Aujourd'hui",settings:"Paramètres",automationSettings:"Paramètres d'automatisation",showInSwitchbar:"Afficher dans la barre de commutateurs",quickAccessSidebar:"Accès rapide depuis la barre latérale",enabled:"Activé",enableAutomation:"Activer l'automatisation pour cette prise",autoOn:"Auto Activé",autoOnDescription:"Allumer au démarrage de l'impression",autoOff:"Auto Désactivé",autoOffDescription:"Éteindre à la fin de l'impression (unique)",autoOffPersistent:"Garder activé",autoOffPersistentDescription:"Rester activé entre les impressions au lieu d'une seule fois",autoOffAfterDrying:"Arrêt auto après séchage",autoOffAfterDryingDescription:"Éteindre à la fin du séchage de l'AMS",delayAfterDryingMinutes:"Délai après séchage (minutes)",turnOffDelayMode:"Mode de délai d'extinction",time:"Temps",temp:"Temp.",delayMinutes:"Délai (minutes)",tempThreshold:"Seuil de température (°C)",tempThresholdDescription:"S'éteint lorsque la buse refroidit en dessous de cette température",edit:"Modifier",deleteConfirm:'Êtes-vous sûr de vouloir supprimer "{{name}}" ? Cette action est irréversible.',turnOnConfirm:'Êtes-vous sûr de vouloir allumer "{{name}}" ?',turnOffConfirm:`Êtes-vous sûr de vouloir éteindre "{{name}}" ? Cela coupera l'alimentation de l'appareil connecté.`,failedToTurn:'Impossible de {{action}} "{{name}}"',unknown:"Inconnu",addTitle:"Ajouter une prise connectée",editTitle:"Modifier la prise connectée",stopScanning:"Arrêter le scan",discoverTasmota:"Découvrir les appareils Tasmota",foundDevices:"{{count}} appareil(s) trouvé(s) - cliquez pour sélectionner :",noDevicesFound:"Aucun appareil Tasmota trouvé sur votre réseau",haNotConfigured:"Home Assistant n'est pas configuré. Configurez-le dans",haSettingsPath:"Paramètres → Réseau → Home Assistant",selectEntity:"Sélectionner l'entité *",ipAddress:"Adresse IP *",nameLabel:"Nom *",username:"Nom d'utilisateur",password:"Mot de passe",authHint:"Laissez vide si votre appareil Tasmota ne nécessite pas d'authentification",linkToPrinter:"Lier à l'imprimante",noPrinter:"Pas d'imprimante (contrôle manuel uniquement)",linkingDescription:"La liaison permet l'allumage/extinction automatique au début/fin de l'impression",powerAlerts:"Alertes de puissance",alertAbove:"Alerte si au-dessus (W)",alertBelow:"Alerte si en dessous (W)",alertDescription:"Recevoir une notification lorsque la consommation dépasse ces seuils. Laisser vide pour désactiver cette direction.",dailySchedule:"Planification quotidienne",turnOnAt:"Allumer à",turnOffAt:"Éteindre à",scheduleDescription:"Allumer/éteindre automatiquement la prise à ces heures chaque jour. Laisser vide pour ignorer cette action.",showOnPrinterCard:"Afficher sur la carte imprimante",displayOnPrinterCard:"Afficher le bouton sur la carte imprimante",connectedResult:"Connecté !",deviceLabel:"Appareil : {{name}} - ",stateLabel:"État : {{state}}",test:"Tester",delete:"Supprimer",save:"Enregistrer",add:"Ajouter",cancel:"Annuler",failedToStartScan:"Impossible de démarrer le scan",nameRequired:"Le nom est requis",entityRequired:"L'entité est requise pour les prises Home Assistant",mqttTopicRequired:"Au moins un topic MQTT doit être configuré pour la puissance, l'énergie ou la surveillance d'état",loadingEntities:"Chargement des entités...",loading:"Chargement...",failedToLoadEntities:"Échec du chargement des entités : {{error}}",noEntitiesMatching:'Aucune entité trouvée correspondant à "{{search}}"',noEntitiesAvailable:"Aucune entité disponible",searchingEntities:"Recherche de toutes les entités ({{count}} trouvées)",showingEntities:"Affichage switch, light, input_boolean ({{count}} disponibles)",energyMonitoringOptional:"Surveillance énergétique (Optionnel)",energyMonitoringHint:"Recherchez et sélectionnez les capteurs fournissant des données de puissance/énergie.",powerSensorW:"Capteur de puissance (W)",energyTodayKwh:"Énergie aujourd'hui (kWh)",totalEnergyKwh:"Énergie totale (kWh)",noMatchingSensors:"Aucun capteur correspondant",none:"Aucun",mqttNotConfigured:"Broker MQTT non configuré. Définissez l'adresse du broker dans",mqttSettingsPath:"Paramètres → Réseau → Publication MQTT",mqttNotConfiguredSuffix:"(vous n'avez pas besoin d'activer la publication, remplissez simplement les détails du broker).",mqttMonitorOnlyDescription:"Les prises MQTT reçoivent les données de puissance/énergie via un abonnement MQTT. Le contrôle on/off n'est pas disponible - utilisez votre broker MQTT ou système domotique.",powerMonitoring:"Surveillance de puissance",energyMonitoring:"Surveillance énergétique",stateMonitoring:"Surveillance d'état",optional:"optionnel",topic:"Sujet",jsonPath:"Chemin JSON",multiplier:"Multiplicateur",onValue:"Valeur ON",mqttPowerHint:`Le chemin JSON extrait la valeur du payload JSON (ex: "power_l1"). Laisser vide si le topic publie des valeurs numériques brutes.
+Valor de ON: la cadena exacta que significa «ON». Déjelo vacío para la detección automática (ON, true, 1).`,restControl:"Control",restOnUrl:"URL de encendido",restOffUrl:"URL de apagado",restOnBody:"Cuerpo de la solicitud de encendido",restOffBody:"Cuerpo de la solicitud de apagado",restMethod:"Método HTTP",restHeaders:"Cabeceras personalizadas (JSON)",restStatusUrl:"URL de estado",restStatusPath:"Ruta JSON del estado",restStatusOnValue:"Valor de ON",restPowerUrl:"URL de potencia",restPowerPath:"Ruta JSON de la potencia",restPowerMultiplier:"Multiplicador de potencia",restEnergyUrl:"URL de energía",restEnergyPath:"Ruta JSON de la energía",restEnergyMultiplier:"Multiplicador de energía",restUrlRequired:"Se requiere al menos una URL (de encendido o apagado) para los enchufes REST",restHeadersHint:'p. ej. {"Authorization": "Bearer your-token"}',restBodyHint:'p. ej. ON, {"state": "on"}',restStatusHint:"URL para sondear el estado actual",restPathHint:"p. ej. state o data.power.status",restPowerUrlHint:"URL independiente para los datos de potencia (usa la URL de estado si está vacía)",restEnergyUrlHint:"URL independiente para los datos de energía (usa la URL de estado si está vacía)",restEnergyHint:"Cada valor puede usar su propia URL o recurrir a la URL de estado. Use multiplicadores para la conversión de unidades (p. ej. 0,001 para convertir Wh en kWh).",testConnection:"Probar conexión",connectionSuccess:"Conexión correcta",noSwitchesInSwitchbar:"No hay interruptores en la barra de interruptores",enableSwitchbarHint:"Active «Mostrar en la barra de interruptores» en Ajustes > Enchufes inteligentes"},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"Correo",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"Notificaciones por correo SMTP",telegram:"Notificaciones mediante un bot de Telegram",discord:"Enviar a un canal de Discord mediante un webhook",ntfy:"Notificaciones push gratuitas y autoalojables",pushover:"Notificaciones push sencillas y fiables",callmebot:"Notificaciones de WhatsApp gratuitas mediante CallMeBot",webhook:"POST HTTP genérico a cualquier URL",homeassistant:"Notificaciones persistentes en el panel de Home Assistant"},lastSuccess:"Última: {{date}}",error:"Error",printer:"Impresora:",allPrinters:"Todas las impresoras",sendTestNotification:"Enviar notificación de prueba",eventSettings:"Ajustes de eventos",enabled:"Activado",sendFromProvider:"Enviar notificaciones desde este proveedor",printEvents:"Eventos de impresión",printerStatus:"Estado de la impresora",amsAlarms:"Alarmas del AMS",amsHtAlarms:"Alarmas del AMS-HT",printQueue:"Cola de impresión",start:"Inicio",plateCheck:"Comprobación de cama",complete:"Completada",failed:"Fallida",stopped:"Detenida",progress:"Progreso",offline:"Desconectada",lowFilament:"Filamento bajo",maintenance:"Mantenimiento",amsHumidity:"Humedad del AMS",amsTemp:"Temp. del AMS",amsHtHumidity:"Humedad del AMS-HT",amsHtTemp:"Temp. del AMS-HT",bedCooled:"Cama enfriada",firstLayer:"Primera capa",quiet:"Silencio",digest:"Resumen {{time}}",printStarted:"Impresión iniciada",plateNotEmpty:"Cama no vacía",plateNotEmptyDescription:"Objetos detectados antes de la impresión",printCompleted:"Impresión completada",bedCooledLabel:"Cama enfriada",bedCooledDescription:"La cama se enfrió por debajo del umbral tras la impresión",firstLayerCompleteLabel:"Primera capa completada",firstLayerCompleteDescription:"Notificar con una captura cuando termina la primera capa",missingSpoolAssignmentLabel:"Falta la asignación de bobina",missingSpoolAssignmentDescription:"Notificar cuando la impresión comienza y las bandejas necesarias no tienen ninguna bobina asignada",printFailed:"Impresión fallida",printStopped:"Impresión detenida",progressMilestones:"Hitos de progreso",progressMilestonesDescription:"Notificar al 25%, 50% y 75%",printerOffline:"Impresora desconectada",printerError:"Error de la impresora",lowFilamentLabel:"Filamento bajo",maintenanceDue:"Mantenimiento pendiente",maintenanceDueDescription:"Notificar cuando se necesite mantenimiento",amsHumidityHigh:"Humedad alta del AMS",amsHumidityHighDescription:"La humedad del AMS normal supera el umbral",amsTemperatureHigh:"Temperatura alta del AMS",amsTemperatureHighDescription:"La temperatura del AMS normal supera el umbral",amsHtHumidityHigh:"Humedad alta del AMS-HT",amsHtHumidityHighDescription:"La humedad del AMS-HT supera el umbral",amsHtTemperatureHigh:"Temperatura alta del AMS-HT",amsHtTemperatureHighDescription:"La temperatura del AMS-HT supera el umbral",inventoryAlerts:"Alertas de inventario",stockReorderAlert:"Alerta de reabastecimiento",stockReorderAlertDescription:"El SKU ha alcanzado su punto de reabastecimiento",stockBreakAlert:"Alerta de rotura de existencias",stockBreakAlertDescription:"Las existencias se agotarán antes de que llegue el reabastecimiento",jobAdded:"Trabajo añadido",jobAddedDescription:"Trabajo añadido a la cola",jobAssigned:"Trabajo asignado",jobAssignedDescription:"Trabajo basado en el modelo asignado a una impresora",jobStarted:"Trabajo iniciado",jobStartedDescription:"El trabajo de la cola empezó a imprimirse",jobWaiting:"Trabajo en espera",jobWaitingDescription:"Trabajo a la espera de filamento o impresora",jobSkipped:"Trabajo omitido",jobSkippedDescription:"Trabajo omitido (el anterior falló)",jobFailed:"Trabajo fallido",jobFailedDescription:"El trabajo no pudo iniciarse",queueComplete:"Cola completada",queueCompleteDescription:"Todos los trabajos de la cola han terminado",quietHours:"Horas de silencio",noNotificationsDuring:"No hay notificaciones durante estas horas",editProviderToChangeQuietHours:"Edite el proveedor para cambiar las horas de silencio",dailyDigest:"Resumen diario",batchNotifications:"Agrupar las notificaciones en un único resumen diario",sendAt:"Enviar a las {{time}}",editProviderToChangeDigestTime:"Edite el proveedor para cambiar la hora del resumen",edit:"Editar",deleteProvider:"Eliminar proveedor de notificaciones",deleteConfirm:'¿Está seguro de que desea eliminar "{{name}}"? Esto no se puede deshacer.',delete:"Eliminar",addTitle:"Añadir proveedor de notificaciones",editTitle:"Editar proveedor de notificaciones",nameLabel:"Nombre *",namePlaceholder:"Mis notificaciones",providerTypeLabel:"Tipo de proveedor *",configuration:"Configuración",testConfiguration:"Probar configuración",printerFilter:"Filtro de impresora",onlyFromPrinter:"Enviar notificaciones solo para los eventos de esta impresora",quietHoursDnd:"Horas de silencio (no molestar)",quietStart:"Inicio",quietEnd:"Fin",dailyDigestLabel:"Resumen diario",sendDigestAt:"Enviar el resumen a las",digestCollected:"Los eventos se recopilarán y se enviarán como un único resumen a esta hora",notificationEvents:"Eventos de notificación",progressPercent:"(25%, 50%, 75%)",bedCooledAfterPrint:"(después de completar la impresión)",eventPriority:{sectionTitle:"Prioridad de ntfy",helpNtfy:"Elija una prioridad para cada evento activado. ntfy las usa para escalar las alertas (sonido, visibilidad, comportamiento de las notificaciones push). Los niveles no establecidos aquí usan el valor predeterminado del servidor ntfy.",min:"Mínima",low:"Baja",default:"Predeterminada",high:"Alta",urgent:"Urgente"},cancel:"Cancelar",save:"Guardar",add:"Añadir",nameRequired:"El nombre es obligatorio",fieldRequired:"{{field}} es obligatorio",phoneNumber:"Número de teléfono",apiKey:"Clave API",serverUrl:"URL del servidor",topic:"Tema",authToken:"Token de autenticación",userKey:"Clave de usuario",appToken:"Token de la aplicación",priority:"Prioridad",botToken:"Token del bot",chatId:"ID del chat",smtpServer:"Servidor SMTP",smtpPort:"Puerto SMTP",security:"Seguridad",authentication:"Autenticación",username:"Nombre de usuario",password:"Contraseña",fromEmail:"Correo del remitente",toEmail:"Correo del destinatario",webhookUrl:"URL del webhook",payloadFormat:"Formato de la carga útil",authorization:"Autorización",titleFieldName:"Nombre del campo del título",messageFieldName:"Nombre del campo del mensaje",editTemplate:"Editar plantilla: {{name}}",titleLabel:"Título",bodyLabel:"Cuerpo",titlePlaceholder:"Título de la notificación...",bodyPlaceholder:"Cuerpo de la notificación...",availableVariables:"Variables disponibles",clickToInsert:"Haga clic para insertar en la posición del cursor en el cuerpo",livePreview:"Vista previa en directo",hide:"Ocultar",show:"Mostrar",loadingPreview:"Cargando la vista previa...",enterTemplateContent:"Introduzca el contenido de la plantilla para ver la vista previa",titlePreview:"Título:",bodyPreview:"Cuerpo:",resetToDefault:"Restablecer al valor predeterminado",titleRequired:"El título es obligatorio",bodyRequired:"El cuerpo es obligatorio",notificationLog:"Registro de notificaciones",showFailedOnly:"Solo fallidas",last24Hours:"Últimas 24 horas",last7Days:"Últimos 7 días",last30Days:"Últimos 30 días",last90Days:"Últimos 90 días",justNow:"Ahora mismo",noFailedNotifications:"No hay notificaciones fallidas",noNotificationsLogged:"No hay notificaciones registradas",unknownProvider:"Proveedor desconocido",logTitle:"Título",logMessage:"Mensaje",logError:"Error",logProvider:"Proveedor: {{type}}",logTime:"Hora: {{time}}",refresh:"Actualizar",clearOld:"Borrar antiguas",statsSummary:"Últimos {{days}} días:",statsNotifications:"notificaciones",statsSent:"{{count}} enviadas",statsFailed:"{{count}} fallidas",eventTypes:{print_start:"Impresión iniciada",print_complete:"Impresión completada",print_failed:"Impresión fallida",print_stopped:"Impresión detenida",print_progress:"Progreso",printer_offline:"Impresora desconectada",printer_error:"Error de la impresora",filament_low:"Filamento bajo",maintenance_due:"Mantenimiento pendiente",test:"Prueba"},userEmail:{title:"Notificaciones",emailNotifications:"Notificaciones por correo",emailNotificationsDesc:"Reciba notificaciones por correo de sus propios trabajos de impresión. Los correos se envían usando los ajustes de SMTP del sistema configurados en la autenticación avanzada.",sendingTo:"Las notificaciones se enviarán a",noEmailWarning:"Su cuenta no tiene una dirección de correo. Póngase en contacto con un administrador para añadir una.",printJobNotifications:"Notificaciones de trabajos de impresión",printJobNotificationsDesc:"Elija qué eventos activan las notificaciones por correo para los trabajos de impresión que envíe.",printJobStarts:"El trabajo de impresión comienza",printJobStartsDesc:"Reciba una notificación cuando su trabajo de impresión comience.",printJobFinishes:"El trabajo de impresión termina",printJobFinishesDesc:"Reciba una notificación cuando su trabajo de impresión se complete correctamente.",printErrors:"Errores de impresión",printErrorsDesc:"Reciba una notificación cuando su trabajo de impresión falle o encuentre un error.",printJobStops:"El trabajo de impresión se detiene",printJobStopsDesc:"Reciba una notificación cuando su trabajo de impresión se cancele o se detenga.",saveSuccess:"Preferencias de notificación guardadas.",saveError:"Error al guardar las preferencias de notificación."}},richTextEditor:{bold:"Negrita",italic:"Cursiva",underline:"Subrayado",bulletList:"Lista con viñetas",numberedList:"Lista numerada",alignLeft:"Alinear a la izquierda",alignCenter:"Centrar",alignRight:"Alinear a la derecha",addLink:"Añadir enlace",removeLink:"Quitar enlace"},externalLinks:{noLinksConfigured:"No hay enlaces externos configurados",deleteLink:"Eliminar enlace",removeCustomIcon:"Quitar el icono personalizado",openInNewTab:"Abrir en una pestaña nueva",placeholders:{linkName:"Mi enlace"}},keyboardShortcuts:{title:"Atajos de teclado",navigation:"Navegación",archivesSection:"Archivos",kProfilesSection:"Perfiles K",generalSection:"General",shortcuts:{goToPrinters:"Ir a Impresoras",goToArchives:"Ir a Archivos",goToQueue:"Ir a la cola",goToStats:"Ir a Estadísticas",goToProfiles:"Ir a Perfiles en la nube",goToSettings:"Ir a Ajustes",focusSearch:"Enfocar la búsqueda",openUploadModal:"Abrir la ventana de subida",clearSelection:"Borrar la selección / quitar el foco del campo",contextMenu:"Menú contextual en las tarjetas",refreshProfiles:"Actualizar perfiles",newProfile:"Nuevo perfil",exitSelectionMode:"Salir del modo de selección",showHelp:"Mostrar esta ayuda"},footer:"Pulse Esc o haga clic fuera para cerrar"},notificationLog:{title:"Registro de notificaciones",events:{printStarted:"Impresión iniciada",printComplete:"Impresión completada",printFailed:"Impresión fallida",printStopped:"Impresión detenida",progress:"Progreso",printerOffline:"Impresora desconectada",printerError:"Error de la impresora",lowFilament:"Filamento bajo",maintenanceDue:"Mantenimiento pendiente",test:"Prueba"},timeAgo:{justNow:"Ahora mismo",minutesAgo:"hace {{minutes}} min",hoursAgo:"hace {{hours}} h"}},restoreBackup:{title:"Restaurar copia de seguridad",restoring:"Restaurando...",restoreComplete:"Restauración completada",restoreFailed:"Error en la restauración",importSettings:"Importar ajustes desde un archivo de copia de seguridad",pleaseWait:"Espere mientras se restauran sus datos",clickToSelect:"Haga clic para seleccionar el archivo de copia de seguridad (.json o .zip)",howDuplicateHandling:"Cómo funciona la gestión de duplicados:",categories:{printers:"Impresoras",smartPlugs:"Enchufes inteligentes",notificationProviders:"Proveedores de notificaciones",filaments:"Filamentos",archives:"Archivos",pendingUploads:"Subidas pendientes",settingsTemplates:"Ajustes y plantillas"},matchingInfo:{printers:"coincidencia por número de serie",smartPlugs:"coincidencia por dirección IP",notificationProviders:"coincidencia por nombre",filaments:"coincidencia por nombre + tipo + marca",archives:"coincidencia por hash del contenido",pendingUploads:"coincidencia por nombre de archivo",settingsTemplates:"siempre se sobrescriben"},replaceExisting:"Reemplazar los datos existentes",keepExisting:"Conservar los datos existentes",replaceDescription:"Sobrescribir los elementos que ya existen con los datos de la copia de seguridad",keepDescription:"Restaurar solo los elementos que aún no existen",caution:"Precaución:",cautionText:"Sobrescribir reemplazará sus configuraciones actuales con los datos de la copia de seguridad. Los códigos de acceso de las impresoras nunca se sobrescriben por seguridad.",itemsRestored:"Elementos restaurados",itemsSkipped:"Elementos omitidos",restored:"Restaurados",skipped:"Omitidos (ya existen)",filesLabel:"Archivos (3MF, miniaturas, etc.)",newApiKeysGenerated:"Nuevas claves API generadas",newApiKeysWarning:"Estas claves solo se muestran una vez. ¡Cópielas ahora!",processingBackup:"Procesando el archivo de copia de seguridad...",noDataFound:"No se encontraron datos para restaurar en el archivo de copia de seguridad.",failedToRestore:"Error al restaurar la copia de seguridad. Compruebe el formato del archivo."},backupExport:{title:"Exportar copia de seguridad",selectData:"Seleccione los datos que incluir",selectAll:"Seleccionar todo",selectNone:"No seleccionar nada",categoryDescriptions:{settings:"Idioma, tema, preferencias de actualización",notifications:"ntfy, Pushover, Discord, etc.",templates:"Plantillas de mensajes personalizadas",smartPlugs:"Configuraciones de enchufes Tasmota",externalLinks:"Enlaces de la barra lateral a servicios externos",printers:"Información de las impresoras (códigos de acceso excluidos)",plateDetection:"Imágenes de referencia de la cama vacía",filaments:"Tipos y costes de filamento",maintenance:"Programaciones de mantenimiento personalizadas",archives:"Todos los datos de impresión + archivos (3MF, miniaturas, fotos)",projects:"Proyectos, elementos de la lista de materiales y adjuntos",pendingUploads:"Subidas de la impresora virtual pendientes de revisión",apiKeys:"Claves API de webhook (se generan claves nuevas al importar)"},requiresPrinters:"Requiere que se seleccionen las impresoras",zipFileWarning:"Se creará un archivo ZIP.",zipFileDescription:"Incluye todos los archivos 3MF, las miniaturas, los time-lapses y las fotos. Esto puede tardar un rato y dar como resultado un archivo grande.",includeAccessCodes:"Incluir los códigos de acceso",includeAccessCodesDescription:"Para transferir a otra máquina",includeAccessCodesWarning:"Los códigos de acceso se incluirán en texto plano. ¡Mantenga este archivo de copia de seguridad seguro!",categoriesSelected:"{{selectedCount}} categorías seleccionadas"},pendingUploads:{placeholders:{notes:"Añada notas sobre esta impresión..."},discardUpload:"Descartar subida",archiveAllUploads:"Archivar todas las subidas",discardAllUploads:"Descartar todas las subidas",archive:"Archivar",timeAgo:{justNow:"Ahora mismo",minutesAgo:"hace {{minutes}} min",hoursAgo:"hace {{hours}} h",daysAgo:"hace {{days}} d"}},apiBrowser:{placeholders:{requestBody:"Cuerpo de la solicitud JSON...",searchEndpoints:"Buscar puntos de conexión..."}},configureAmsSlot:{title:"Configurar la ranura del AMS",slotConfigured:"¡Ranura configurada!",configuringSlot:"Configurando la ranura:",slotLabel:"{{ams}} Ranura {{slot}}",searchPresets:"Buscar preajustes...",colorPlaceholder:"Nombre del color o hexadecimal (p. ej., marrón, FF8800)",clearCustomColor:"Borrar el color personalizado",noCloudPresets:"No hay preajustes de la nube. Inicie sesión en Bambu Cloud para sincronizar.",noPresetsAvailable:"No hay preajustes disponibles. Inicie sesión en Bambu Cloud o importe perfiles locales.",noMatchingPresets:"No se encontraron preajustes coincidentes.",custom:"Personalizado",builtin:"Integrado",settingsSentToPrinter:"Ajustes enviados a la impresora",filamentProfile:"Perfil de filamento",kProfileLabel:"Perfil K (avance de presión)",filteringFor:"Filtrando por: {{material}}",noKProfile:"Sin perfil K (usar el predeterminado 0,020)",noMatchingKProfiles:"No se encontraron perfiles K coincidentes. Se usará el K=0,020 predeterminado.",selectFilamentFirst:"Seleccione primero un perfil de filamento",kFromCalibration:"K={{value}} de la calibración de la impresora",customColorLabel:"Color personalizado (opcional)",presetColors:"Colores de {{name}}:",showLessColors:"Mostrar menos colores",showMoreColors:"Mostrar más colores",clear:"Borrar",hexLabel:"Hex: #{{hex}}",resetting:"Restableciendo...",resetSlot:"Restablecer ranura",cancel:"Cancelar",configuring:"Configurando...",configureSlot:"Configurar ranura"},githubBackup:{title:"Copia de seguridad en Git",history:"Historial",downloadBackup:"Descargar copia de seguridad",restoreBackup:"Restaurar copia de seguridad",noBackupsYet:"Aún no hay copias de seguridad"},emailSettings:{placeholders:{fromName:"BamBuddy"}},tagManagement:{searchTags:"Buscar etiquetas...",renameTag:"Renombrar etiqueta",deleteTag:"Eliminar etiqueta"},notificationTemplates:{placeholders:{title:"Título de la notificación...",body:"Cuerpo de la notificación..."}},batchTag:{placeholders:{newTag:"Introduzca una nueva etiqueta..."}},photoGallery:{deletePhoto:"Eliminar foto"},filamentHoverCard:{copySpoolUuid:"Copiar el UUID de la bobina"},kProfilesView:{hasNote:"Tiene nota",copyProfile:"Copiar perfil"},layout:{openMenu:"Abrir menú",noPermissionSystemInfo:"No tiene permiso para ver la información del sistema"},dashboard:{dragToReorder:"Arrastre para reordenar",hideWidget:"Ocultar widget"},notificationProviderCard:{deleteNotificationProvider:"Eliminar proveedor de notificaciones"},fileManagerModal:{closeFileManager:"Cerrar el gestor de archivos",sortFiles:"Ordenar archivos",goToParentFolder:"Ir a la carpeta superior",threeView:"Vista 3D"},embeddedCameraViewer:{refreshStream:"Actualizar la transmisión",close:"Cerrar",zoomOut:"Alejar",resetZoom:"Restablecer el zoom",zoomIn:"Acercar",dragToResize:"Arrastre para redimensionar"},timelapseViewer:{skipBack5s:"Retroceder 5 s",skipForward5s:"Avanzar 5 s"},notificationProviders:{descriptions:{email:"Notificaciones por correo SMTP",telegram:"Notificaciones mediante un bot de Telegram",discord:"Enviar a un canal de Discord mediante un webhook",ntfy:"Notificaciones push gratuitas y autoalojables",pushover:"Notificaciones push sencillas y fiables",callmebot:"Notificaciones de WhatsApp gratuitas mediante CallMeBot",webhook:"POST HTTP genérico a cualquier URL"}},logViewer:{searchPlaceholder:"Buscar mensaje o nombre del registrador...",noLogEntries:"No se encontraron entradas de registro"},switchbarPopover:{noSwitchesInSwitchbar:"No hay interruptores en la barra de interruptores"},projectPageModal:{placeholders:{title:"Título",designer:"Diseñador",license:"Licencia",description:"Introduzca una descripción...",profileTitle:"Título del perfil",profileDescription:"Descripción del perfil..."}},spoolmanSettings:{},time:{unknown:"-",waiting:"En espera",justNow:"Ahora mismo",now:"Ahora",minsAgo:"hace {{count}} min",inMins:"en {{count}} min",hoursAgo:"hace {{count}} h",inHours:"en {{count}} h",daysAgo:"hace {{count}} d",inDays:"en {{count}} d"},spoolbuddy:{nav:{dashboard:"Panel",ams:"AMS",inventory:"Inventario",writeTag:"Escribir",settings:"Ajustes"},status:{nfcReady:"NFC listo",nfcOff:"NFC apagado",offline:"Desconectado",online:"En línea",noPrinters:"No hay impresoras",deviceOffline:"Dispositivo desconectado",waitingConnection:"Esperando la conexión del dispositivo...",systemReady:"Sistema listo",status:"Estado"},dashboard:{readyToScan:"Listo para escanear",idleMessage:"Coloque una bobina en la báscula para identificarla",nfcHint:"La etiqueta NFC se leerá automáticamente",device:"Dispositivo",syncWeight:"Sincronizar peso",weightSynced:"¡Sincronizado!",unknownTag:"Etiqueta desconocida",newTag:"Nueva etiqueta detectada",onScale:"en la báscula",linkSpool:"Vincular a bobina",linkTagTitle:"Vincular la etiqueta a una bobina",linkTag:"Vincular etiqueta",selectSpool:"Seleccione una bobina a la que vincular esta etiqueta:",noUntagged:"No se encontraron bobinas sin etiquetas",tagDetected:"Etiqueta detectada",noTag:"Sin etiqueta",tagId:"Etiqueta",grossWeight:"Peso bruto",spoolSize:"Tamaño de la bobina",close:"Cerrar",currentSpool:"Bobina actual",plateReady:"Cama lista: {{name}}",plateReadyLabel:"Camas listas para despejar",plateClearAction:"Despejar",plateClearedToast:"Cama marcada como despejada",plateClearFailed:"No se pudo marcar la cama como despejada"},modal:{spoolDetected:"Bobina detectada",assignToAms:"Asignar al AMS",syncWeight:"Sincronizar peso",weightSynced:"¡Sincronizado!",syncing:"Sincronizando...",newTagDetected:"Nueva etiqueta detectada",addToInventory:"Añadir al inventario",assignToAmsTitle:"Asignar al AMS",selectSlot:"Seleccione una ranura",assign:"Asignar",assigning:"Asignando...",assignSuccess:"¡Asignada!",assignPendingInsert:"Asignada. La ranura se configurará cuando inserte la bobina.",assignError:"Error al asignar la bobina. Inténtelo de nuevo.",noPrinterSelected:"Seleccionar una impresora...",noAmsDetected:"No se detectó ningún AMS en esta impresora",slot:"Ranura"},weight:{noReading:"Sin lectura",stable:"Estable",measuring:"Midiendo...",tare:"Tara",calibrate:"Calibrar"},spool:{remaining:"Restante",material:"Material",brand:"Marca",color:"Color",coreWeight:"Núcleo",labelWeight:"Etiqueta",scaleWeight:"Báscula",netWeight:"Neto",lastUsed:"Usada por última vez"},ams:{noData:"No se detectó ningún AMS",connectAms:"Conecte un AMS para ver las ranuras de filamento",noPrinter:"No hay impresora seleccionada",selectPrinter:"Seleccione una impresora en la barra superior",printerDisconnected:"Impresora desconectada",humidity:"Humedad",level:"Nivel",active:"Activa",slot:"Ranura",empty:"Vacía"},inventory:{search:"Buscar bobinas...",empty:"No hay bobinas en el inventario",noResults:"No hay bobinas coincidentes",spools:"bobinas",addSpool:"Añadir bobina"},settings:{tabDevice:"Dispositivo",tabDisplay:"Pantalla",tabScale:"Báscula",tabUpdates:"Actualizaciones",nfcReader:"Lector NFC",type:"Tipo",connection:"Conexión",notConnected:"N/D",deviceInfo:"Información del dispositivo",hostname:"Host",uptime:"Tiempo de actividad",systemConfig:"Backend y autenticación",backendUrl:"URL del backend de Bambuddy",apiToken:"Token de API",apiTokenPlaceholder:"Introduzca el token de API",saveConfig:"Guardar configuración",systemQueued:"Configuración encolada.",nfcDiagnostic:"Diagnóstico de NFC",scaleDiagnostic:"Diagnóstico de la báscula",readTagDiagnostic:"Diagnóstico de lectura de etiqueta",testNfc:"Probar el lector",testScale:"Probar la precisión",testReadTag:"Leer etiqueta",systemFieldsRequired:"La URL del backend es obligatoria.",brightness:"Brillo",saved:"Guardado",noBacklight:"No se detectó retroiluminación DSI. El control del brillo requiere una pantalla DSI.",screenBlank:"Tiempo de espera para apagar la pantalla",screenBlankDesc:"La pantalla se apaga tras la inactividad. Toque para activarla.",displayNote:"El brillo se aplica como un filtro de software.",scaleCalibration:"Calibración de la báscula",currentWeight:"Peso actual",tareOffset:"Tara",calFactor:"Factor",knownWeight:"Peso conocido",calStep1:"Retire todos los elementos de la báscula y pulse Poner a cero.",calStep2:"Coloque el peso conocido en la báscula.",setZero:"Poner a cero",calibrateNow:"Calibrar",calibrated:"Calibrada",tareSet:"Comando de tara enviado. Esperando al dispositivo...",tareComplete:"¡Tara completada!",tareTimedOut:"Tara agotó el tiempo de espera — ¿está activo el daemon de SpoolBuddy?",tareFailed:"Error al enviar el comando de tara",zeroSet:"Punto cero establecido. Coloque el peso conocido en la báscula.",calibrationDone:"¡Calibración completada!",calibrationFailed:"Error en la calibración",lastCalibrated:"Calibrada por última vez",stable:"Estable",settling:"Estabilizando...",firmware:"Firmware",scale:"Báscula",noDevice:"No se encontró ningún dispositivo SpoolBuddy",daemonVersion:"Versión del demonio",currentVersion:"Actual",versionPending:"Esperando al demonio...",checking:"Comprobando...",checkUpdates:"Buscar actualizaciones",updateAvailable:"Actualización disponible",updateInstructions:"Actualice mediante SSH: ejecute el script de instalación de SpoolBuddy para actualizar.",upToDate:"Actualizado",includeBeta:"Incluir versiones beta"},writeTag:{tabExisting:"Bobina existente",tabNew:"Bobina nueva",tabReplace:"Reemplazar etiqueta",searchPlaceholder:"Buscar por material, color, marca...",noUntaggedSpools:"No hay bobinas sin etiquetas",noTaggedSpools:"No hay bobinas con etiquetas",selectSpool:"Seleccione una bobina y luego coloque una etiqueta NTAG en blanco en el lector",placeTag:"Coloque una etiqueta NTAG en el lector",tagReady:"Etiqueta detectada — lista para escribir",writeTag:"Escribir etiqueta",replaceTag:"Reemplazar etiqueta",writing:"Escribiendo la etiqueta...",waiting:"Esperando a SpoolBuddy...",writeSuccess:"¡Etiqueta escrita correctamente!",writeFailed:"Error al escribir",queueFailed:"Error al encolar el comando de escritura",tryAgain:"Inténtelo de nuevo",cancel:"Cancelar",replaceWarning:"La etiqueta antigua se desvinculará. La nueva etiqueta la reemplazará.",deviceOffline:"SpoolBuddy está desconectado",material:"Material",colorName:"Nombre del color",color:"Color",brand:"Marca",weight:"Peso (g)",createSpool:"Crear bobina",creating:"Creando...",spoolCreated:"¡Bobina creada! Lista para escribir.",createFailed:"Error al crear la bobina",incompleteDataWarning:"Etiqueta escrita con datos de Spoolman incompletos"},quickMenu:{printerPower:"Alimentación de la impresora",systemControls:"Sistema",restartDaemon:"Reiniciar demonio",restartBrowser:"Reiniciar navegador",reboot:"Reiniciar",shutdown:"Apagar",swipeToClose:"Deslice hacia abajo para cerrar",confirmTitle:"Confirmar",confirmShutdown:"¿Está seguro de que desea apagar el SpoolBuddy? Necesitará acceso físico para volver a encenderlo.",confirmReboot:"¿Está seguro de que desea reiniciar el SpoolBuddy?",confirmRestartDaemon:"¿Reiniciar el demonio de SpoolBuddy? El NFC y la báscula no estarán disponibles temporalmente.",confirmRestartBrowser:"¿Reiniciar el navegador del quiosco? La pantalla se quedará en negro brevemente.",confirm:"Confirmar",confirmPlugOn:"¿Encender {{name}}?",confirmPlugOff:"¿Apagar {{name}}?",turnOn:"Encender",turnOff:"Apagar"}},diagnostic:{modalTitle:"Diagnóstico de conexión — {{name}}",running:"Ejecutando el diagnóstico...",runningElapsed:"Ejecutando el diagnóstico... ({{elapsed}}s)",waitingForReportHint:"Esperando a que la impresora publique un informe de estado — puede tardar hasta {{max}} segundos.",runFailed:"No se pudo ejecutar el diagnóstico: {{error}}",retry:"Ejecutar de nuevo",runButton:"Ejecutar diagnóstico",sectionTitle:"Diagnóstico de conexión",sectionDescription:"Compruebe por qué una impresora no se conecta o no imprime — accesibilidad de los puertos, modo desarrollador LAN, modo de red de Docker y credenciales.",noPrinters:"No hay impresoras configuradas.",overall:{ok:"No se encontraron problemas — la conexión de la impresora parece correcta.",warnings:"La impresora debería funcionar, pero algunas cosas necesitan atención.",problems:"Se encontraron problemas que explican por qué la impresora no se conecta o no imprime."},check:{port_mqtt:{title:"Puerto de control (MQTT 8883)",pass:"Accesible — la impresora acepta conexiones de control.",fail:"El puerto 8883 no es accesible. La impresora está apagada, en una dirección IP distinta, o un cortafuegos lo está bloqueando. Verifique la IP de la impresora y que nada bloquee el puerto 8883."},port_ftps:{title:"Puerto de transferencia de archivos (FTPS 990)",pass:"Accesible — el envío de archivos de impresión funcionará.",warn:"El puerto 990 no es accesible. La supervisión puede seguir funcionando, pero el envío de impresiones a la impresora fallará. Asegúrese de que el puerto 990 no esté bloqueado."},port_rtsps:{title:"Puerto de la cámara (RTSPS 322)",pass:"Accesible — la transmisión de la cámara funcionará.",warn:"El puerto 322 no es accesible. La vista de la cámara en directo no funcionará. Esto no afecta a la impresión."},network_mode:{title:"Modo de red de Docker",pass:"Ejecutándose en modo de red de host.",warn:'Bambuddy se está ejecutando en red de tipo bridge de Docker. La detección de impresoras y la impresora virtual necesitan el modo de red de host — vuelva a crear el contenedor con "network_mode: host".',skip:"No se está ejecutando en Docker — no aplicable."},subnet:{title:"Subred de la red",pass:"La impresora y Bambuddy están en la misma subred.",warn:"La impresora ({{printer_ip}}) y Bambuddy ({{host_ip}}) están en subredes distintas. Es posible que no se alcancen entre sí a menos que se configure el enrutamiento entre las subredes.",skip:"No se pudo determinar la subred — omitido."},mqtt_auth:{title:"Credenciales de la impresora",pass:"La impresora aceptó la conexión.",fail:"La impresora es accesible pero rechazó la conexión. Lo más probable es que el código de acceso o el número de serie sean incorrectos. El código de acceso cambia cada vez que se conmuta el modo desarrollador — vuelva a copiarlo de la pantalla de la impresora.",skip:"No comprobado — no se pudo alcanzar la impresora."},developer_mode:{title:"Modo desarrollador LAN",pass:"El modo desarrollador está activado.",fail:"El modo desarrollador está DESACTIVADO en la impresora. Actívelo en los ajustes de LAN de la impresora — y confirme con Aceptar. Sin él, las impresiones no comenzarán.",skip:"No se pudo comprobar — requiere una conexión activa con la impresora."},printer_publishing:{title:"La impresora publica estado",pass:"La impresora está publicando actualizaciones de estado — AMS, filamentos y perfiles K se reflejarán correctamente en el slicer.",fail:"El broker MQTT aceptó la conexión, pero la impresora no ha publicado ningún informe de estado. Casi siempre se trata de un número de serie incorrecto o con mayúsculas/minúsculas mal escritas — el topic device/<serial>/report distingue entre mayúsculas y minúsculas. Revise el número de serie en los ajustes de la impresora comparándolo con la pantalla del aparato.",skip:"No se pudo comprobar — requiere una conexión activa con la impresora."}}},systemHealth:{sectionTitle:"Estado del sistema",sectionDescription:"Analiza los registros recientes en busca de problemas conocidos que normalmente puedes resolver tú mismo, antes de que se conviertan en un ticket de soporte.",rescan:"Volver a analizar",clean:"No se encontraron problemas conocidos en las últimas {{times}} entradas de registro.",logUnavailable:"El registro en archivo está desactivado, por lo que no se pueden analizar los registros. Activa el registro en archivo para usar esta comprobación.",learnMore:"Cómo solucionarlo",fixLabel:"Solución:",occurrences:"Visto {{times}}× — última vez a las {{lastSeen}}",category:{layer8:"Puedes solucionarlo",environment:"Entorno",bug:"Por favor, repórtalo"},signature:{"ftp-auth-rejected":{name:"La impresora rechazó el código de acceso",cause:"La impresora rechazó el inicio de sesión de transferencia de archivos. El código de acceso es incorrecto o cambió tras activar el Modo Desarrollador.",fix:"Vuelve a copiar el código de acceso desde la pantalla de la impresora (ajustes de LAN) y actualízalo en los ajustes de la impresora en Bambuddy."},"ftp-connection-timeout":{name:"Se agotó el tiempo de la conexión de transferencia de archivos",cause:"Bambuddy no pudo alcanzar el puerto de transferencia de archivos de la impresora (FTPS 990). El puerto está bloqueado, o la impresora está apagada o en otra subred.",fix:"Asegúrate de que nada bloquee el puerto 990 entre Bambuddy y la impresora, y de que ambos estén en la misma red."},"ftp-ssl-error":{name:"Falló el protocolo de enlace seguro de transferencia de archivos",cause:"El protocolo de enlace TLS con el servidor de transferencia de archivos de la impresora falló. Suele deberse a un cortafuegos o a un firmware de impresora desactualizado.",fix:"Actualiza el firmware de la impresora y comprueba que ningún cortafuegos o proxy intercepte la conexión en el puerto 990."},"mqtt-connection-flapping":{name:"La conexión con la impresora se cae continuamente",cause:"La conexión de control (MQTT 8883) se desconecta y reconecta repetidamente, normalmente por una red débil o un puerto parcialmente bloqueado.",fix:"Comprueba la señal Wi-Fi en la impresora, usa preferentemente una conexión por cable y asegúrate de que el puerto 8883 sea accesible de forma fiable."},"camera-connection-refused":{name:"Transmisión de cámara inaccesible",cause:"No se pudo acceder a la cámara en vivo en el puerto RTSPS 322. El puerto está bloqueado, o la cámara o la vista en vivo por LAN están desactivadas en la impresora.",fix:"Activa la cámara y la vista en vivo por LAN en la impresora y asegúrate de que el puerto 322 no esté bloqueado. Esto no afecta a la impresión."},"database-locked":{name:"Conflictos de escritura en la base de datos",cause:'La base de datos SQLite presenta errores "database is locked" bajo carga, algo habitual al usar varias impresoras a la vez.',fix:"Cambia Bambuddy a una base de datos PostgreSQL externa. Consulta la guía de PostgreSQL en la documentación."}}},vpDiagnostic:{title:"Comprobación de configuración — {{name}}",runButton:"Ejecutar comprobación de configuración",running:"Ejecutando comprobación de configuración...",runFailed:"No se pudo ejecutar la comprobación de configuración: {{error}}",retry:"Volver a comprobar",overall:{ok:"Todas las comprobaciones se superaron — esta impresora virtual está configurada correctamente.",warnings:"La impresora virtual debería funcionar, pero algunas cosas requieren atención.",problems:"Se encontraron problemas que explican por qué el laminador no puede ver ni usar esta impresora virtual."},check:{enabled:{title:"Impresora virtual habilitada",fail:"Esta impresora virtual está apagada. Actívela para que sea detectable."},running:{title:"Servicios en ejecución",fail:"La impresora virtual está habilitada pero sus servicios no se están ejecutando. Revise el registro de Bambuddy — normalmente los detiene un conflicto de IP de enlace o un error de permisos."},bind_interface:{title:"Interfaz de red de enlace",fail:'La interfaz de enlace no está configurada o ya no existe en este host. Elija una interfaz actual en el menú "Interfaz de enlace".'},access_code:{title:"Código de acceso configurado",fail:"No hay ningún código de acceso configurado. Al laminador se le debe dar el mismo código de acceso de 8 caracteres que configura aquí."},target_printer:{title:"Impresora de destino",fail:"No hay ninguna impresora de destino seleccionada. El modo proxy necesita una impresora real a la que reenviar.",warn:"La impresora de destino está desconectada ahora mismo — el reenvío se reanudará cuando vuelva a conectarse."},port_ftps:{title:"Servicio de subida de archivos (puerto {{port}})",fail:"No hay nada escuchando en el puerto {{port}} de la IP de enlace, por lo que el laminador no puede subir archivos. La causa habitual es un conflicto de puerto en esta interfaz."},port_mqtt:{title:"Servicio de control (puerto {{port}})",fail:"No hay nada escuchando en el puerto {{port}} de la IP de enlace, por lo que el laminador no puede conectarse ni mostrar el estado."},port_bind:{title:"Servicio de detección (puerto {{port}})",fail:"No hay nada escuchando en el puerto {{port}} de la IP de enlace, por lo que falla el protocolo de detección del laminador."},certificate:{title:"Certificado TLS",pass:"Certificado listo. Asegúrese de que el certificado de CA de Bambuddy (arriba) esté importado en el almacén de confianza de su laminador.",fail:"Falta el certificado TLS de esta impresora virtual. Compruebe que el directorio de datos de Bambuddy tenga permisos de escritura."}}},bugReport:{logHealthSummary:"Se encontraron problemas conocidos en tus registros",logHealthIntro:"Los registros recientes coinciden con problemas conocidos. Revisa las soluciones de abajo: resolverlas podría arreglar tu problema sin un informe de error. Aun así, puedes enviar un informe abajo.",title:"Informar de un error",description:"Descripción",descriptionPlaceholder:"¿Qué salió mal? Describa el problema...",email:"Correo (opcional)",emailPlaceholder:"su@correo.com",emailPrivacy:"Si lo proporciona, su correo se incluirá en una sección plegada de la incidencia de GitHub para que el mantenedor pueda hacer un seguimiento.",screenshot:"Captura de pantalla",uploadOrPaste:"Suba, pegue o arrastre una imagen",dataCollectedSummary:"¿Qué datos se incluyen en el informe?",dataIncluded:"Incluidos:",dataIncludedList:"Versión de la aplicación, sistema operativo, arquitectura, versión de Python, estadísticas de la base de datos (solo recuentos), modelos de impresora, número de boquillas, versiones de firmware, estado de la conectividad, estado de las integraciones (Spoolman, MQTT, HA), ajustes no sensibles, número de interfaces de red, detalles de Docker, versiones de las dependencias.",dataNeverIncluded:"Nunca incluidos:",dataNeverIncludedList:"Nombres de impresora, números de serie, códigos de acceso, contraseñas, direcciones IP, direcciones de correo, claves API, tokens, URL de webhook, nombres de host o nombres de usuario.",submit:"Enviar",startLogging:"Iniciar el registro de depuración",stepEnableLogging:"Registro de depuración activado",stepReproduce:"Reproduzca el problema ahora",stepStopLogging:"Detener y enviar el informe",stopAndSubmit:"Detener y enviar",maxDuration:"Se detiene automáticamente tras {{minutes}} min",stoppingLogs:"Recopilando registros y enviando...",submitting:"Enviando el informe de error...",submittingStepConnection:"Ejecutando comprobaciones de conectividad de impresoras",submittingStepVirtualPrinters:"Ejecutando comprobaciones de configuración de impresoras virtuales",submittingStepLogScan:"Analizando los registros recientes en busca de problemas conocidos",submittingStepSubmit:"Enviando el informe a GitHub",submitSuccess:"¡Informe de error enviado correctamente!",submitFailed:"Error al enviar el informe de error",diagnosticChecking:"Comprobando las conexiones de las impresoras...",diagnosticHealthy:"La comprobación de conexión se superó — no se encontraron problemas en sus impresoras.",diagnosticSummary:"{{problems}} de {{total}} impresoras tienen problemas de conexión",diagnosticIntro:"Una o más impresoras tienen un problema de conexión que puede estar causando su problema. Despliegue una impresora a continuación para ver la solución — resolverla podría solucionar el problema sin un informe de error. Aún puede enviar un informe a continuación.",thankYou:"¡Gracias!",submitted:"Su informe de error se ha enviado.",viewIssue:"Ver incidencia",unexpectedError:"Se produjo un error inesperado"},failureDetection:{title:"Detección de fallos por IA",description:"Supervise las impresiones con una API de ML de Obico autoalojada y actúe automáticamente ante los fallos detectados.",mlUrl:"URL de la API de ML de Obico",mlUrlHint:"URL base de su contenedor ml_api de Obico autoalojado (p. ej. http://192.168.1.10:3333).",test:"Probar",testSuccess:"API de ML accesible y correcta.",testFailed:"No se pudo alcanzar la API de ML.",sensitivity:"Sensibilidad",sensitivityLow:"Baja (menos falsos positivos)",sensitivityMedium:"Media (equilibrada)",sensitivityHigh:"Alta (detección temprana, más falsos positivos)",sensitivityHint:"Ajusta los umbrales de confianza que activan las advertencias y los fallos.",action:"Acción ante un fallo detectado",actionNotify:"Solo notificar",actionPause:"Pausar la impresión",actionPauseOff:"Pausar y cortar la corriente",pollInterval:"Intervalo de sondeo (segundos)",pollIntervalHint:"Con qué frecuencia comprobar cada impresora mientras imprime. Mínimo 5 s, máximo 120 s.",externalUrlMissing:"La URL externa no está establecida.",externalUrlHint:"La API de ML obtiene la captura de la cámara por URL. Establezca la URL externa en los ajustes generales para que el contenedor de la API de ML pueda alcanzar Bambuddy.",perPrinterTitle:"Impresoras supervisadas",perPrinterHint:"Elija qué impresoras vigila el servicio de detección.",monitorAll:"Supervisar todas las impresoras conectadas",statusTitle:"Estado",serviceRunning:"Servicio en ejecución",thresholds:"Umbrales bajo / alto",activePrinters:"Impresiones activas",noActivePrints:"No hay impresiones en curso actualmente.",historyTitle:"Detecciones recientes",noHistory:"Aún no hay detecciones."},makerworld:{title:"MakerWorld",description:"Pegue la URL de un modelo de MakerWorld para importarlo e imprimirlo directamente desde Bambuddy — sin tener que salir a la aplicación Bambu Handy.",pasteUrlHeader:"Importar desde MakerWorld",pasteUrlPlaceholder:"https://makerworld.com/en/models/… o pegue cualquier enlace de MakerWorld",resolveButton:"Resolver",signInRequiredTitle:"Se requiere iniciar sesión en Bambu Cloud para descargar",signInRequiredBody:"Puede explorar los detalles del modelo de forma anónima, pero MakerWorld requiere una cuenta de Bambu Cloud para descargar archivos 3MF.",openCloudSettings:"Abrir los ajustes de la nube",untitledModel:"Modelo sin título",byCreator:"de {{name}}",downloadsCount:"{{count}} descargas",licensePrefix:"Licencia",alreadyImported:"Ya está en la biblioteca",openOnMakerworld:"Abrir en MakerWorld",alreadyInLibrary:"Este modelo ya está en su biblioteca — encuéntrelo en Gestor de archivos → MakerWorld",importSuccess:"{{filename}} importado — guardado en Gestor de archivos → MakerWorld",platesHeader:"Camas ({{count}})",plateDefaultName:"Cama {{n}}",materialCount:"{{count}} filamentos",amsRequired:"AMS necesario",slicedFor:"Laminado para {{printer}}",alsoCompatible:"También marcado como compatible: {{printers}}",importToLibrary:"Guardar",sliceIn:"Guardar y laminar en {{slicer}}",disclaimer:"La integración con MakerWorld usa puntos de conexión de API documentados por la comunidad. Bambuddy no está afiliado a MakerWorld ni a Bambu Lab ni cuenta con su respaldo.",lastImportSuccess:"Importado a su biblioteca",lastImportAlreadyInLibrary:"Ya está en su biblioteca",viewInLibrary:"Ver en el gestor de archivos",openInBambuStudio:"Abrir en Bambu Studio",openInOrcaSlicer:"Abrir en OrcaSlicer",importTo:"Importar al gestor de archivos",recentImportsHeader:"Importaciones recientes",phaseResolving:"Resolviendo",phaseDownloading:"Descargando",folderAuto:"MakerWorld (predeterminada)",importAll:"Importar todo",importAllProgress:"Importando {{current}}/{{total}}",openGallery:"Abrir la galería de imágenes",galleryPrev:"Imagen anterior",galleryNext:"Imagen siguiente",deleteImport:"Quitar de la biblioteca",importDeleting:"Quitando…",importDeleted:"Quitado de la biblioteca",confirmDelete:"¿Quitar {{filename}} de la biblioteca? Esto elimina el archivo local, pero la cama se puede volver a importar desde MakerWorld.",errors:{resolveFailed:"No se pudo resolver esa URL de MakerWorld.",downloadFailed:"Error en la descarga. Inténtelo de nuevo.",deleteFailed:"No se pudo quitar el archivo de la biblioteca."}},gcodeViewer:{back:"Atrás",backToArchives:"Volver a los archivos de impresión",backToFiles:"Volver al gestor de archivos"},libraryTrash:{title:"Papelera",headerButton:"Papelera",headerTooltip:"Ver los archivos movidos a la papelera",backToFiles:"Volver al gestor de archivos",subtitleAdmin:"Los archivos eliminados permanecen aquí durante {{days}} días y luego se eliminan automáticamente. Esta vista muestra los archivos en la papelera de todos los usuarios.",subtitleUser:"Los archivos eliminados permanecen aquí durante {{days}} días y luego se eliminan automáticamente.",loading:"Cargando la papelera…",loadError:"No se pudo cargar la papelera.",empty:"La papelera está vacía.",summary:"{{count}} archivos · {{size}}",emptyTrash:"Vaciar la papelera",restore:"Restaurar",purgeNow:"Eliminar ahora",autoPurgeIn:"Se elimina automáticamente en {{when}}",days:"días",retentionLabel:"Eliminar automáticamente tras",selectAll:"Seleccionar todo",selectOne:"Seleccionar {{filename}}",selectionCount:"{{count}} seleccionados",bulkRestore:"Restaurar los seleccionados",bulkPurge:"Eliminar los seleccionados",col:{filename:"Archivo",folder:"Carpeta",size:"Tamaño",deleted:"Movido a la papelera",autoPurge:"Se elimina automáticamente",owner:"Propietario",actions:"Acciones"},confirm:{purgeTitle:"¿Eliminar permanentemente?",purgeBody:"{{filename}} se eliminará del disco y no se podrá restaurar.",emptyTitle:"¿Vaciar la papelera?",emptyBody:"Los {{count}} archivos se eliminarán del disco. Esto no se puede deshacer.",bulkPurgeTitle:"¿Eliminar permanentemente los archivos seleccionados?",bulkPurgeBody:"Los {{count}} archivos seleccionados se eliminarán del disco y no se podrán restaurar.",cta:"Eliminar permanentemente"},toast:{restored:"Archivo restaurado.",restoreFailed:"No se pudo restaurar el archivo.",purged:"Archivo eliminado permanentemente.",purgeFailed:"No se pudo eliminar el archivo.",emptied:"Se eliminaron {{count}} archivo(s) de la papelera.",emptyFailed:"No se pudo vaciar la papelera.",retentionSaved:"Eliminación automática establecida en {{days}} días.",retentionFailed:"No se pudo guardar el ajuste de retención.",bulkRestored:"Se restauraron {{count}} archivo(s).",bulkPurged:"Se eliminaron {{count}} archivo(s)."}},libraryPurge:{title:"Purgar archivos antiguos",headerButton:"Purgar antiguos",headerTooltip:"Mover en bloque los archivos antiguos a la papelera",description:"Limpie de un solo paso los archivos antiguos de su biblioteca. Los archivos con un historial de impresión envejecen según su fecha de última impresión; los archivos que nunca se imprimieron envejecen según su fecha de subida.",ageLabel:"Mover los archivos de más de",days:"días",includeNeverPrinted:"Incluir los archivos que nunca se han impreso",effectsTitle:"Qué ocurre cuando hace clic en Purgar",effect1:"Los archivos coincidentes se mueven a la papelera — aún no se eliminan del disco.",effect2:"Puede restaurarlos de la papelera en cualquier momento hasta que expire el periodo de retención.",effect3:"Tras la retención, el barrido de la papelera los elimina permanentemente del disco.",effect4:"Los archivos de carpetas externas (vinculadas) se omiten — Bambuddy nunca elimina bytes que no le pertenecen.",previewLoading:"Comprobando cuántos archivos coinciden…",previewFailed:"No se pudo previsualizar la purga.",previewSummary:"{{count}} archivos · {{size}} se moverían a la papelera",andMore:"…y {{count}} más",warning:"Los archivos en la papelera siguen contando para el almacenamiento hasta que expire el periodo de retención. Vacíe la papelera después para liberar el disco de inmediato.",confirmCta:"Mover {{count}} a la papelera",purging:"Moviendo a la papelera…",toast:{success:"Se movieron {{count}} archivo(s) a la papelera.",failed:"No se pudieron purgar los archivos."}},libraryAutoPurge:{enableLabel:"Purgar automáticamente los archivos antiguos",enableDescription:"Ejecuta la purga de administración una vez al día. Los archivos van primero a la papelera — no se eliminan de inmediato.",ageLabel:"Purgar automáticamente los archivos de más de",ageDescription:"Mínimo 7 días, máximo 10 años. Usa la misma regla de antigüedad que el botón de purga manual.",days:"días",includeNeverPrinted:"Incluir los archivos que nunca se han impreso",saveFailed:"No se pudieron guardar los ajustes de purga automática."},archivePurge:{headerButton:"Purgar antiguos",headerTooltip:"Eliminar en bloque los archivos antiguos",title:"Purgar archivos antiguos",description:"Limpie el historial de impresión antiguo. Cada archivo envejece según la finalización de su impresión más reciente — reimprimir un archivo actualiza su antigüedad, por lo que el trabajo activo nunca se purga.",ageLabel:"Eliminar los archivos no impresos en los últimos",days:"días",effectsTitle:"Qué ocurre cuando hace clic en Purgar",effect1:"Cada archivo coincidente se oculta de los listados y sus archivos se eliminan del disco (3MF, miniatura, time-lapse, 3MF de origen, archivo de diseño F3D, fotos).",effect2:"La fila del archivo permanece en la base de datos para que las estadísticas rápidas conserven la contribución de filamento, tiempo, coste y energía — igual que el comportamiento predeterminado de la eliminación de un solo archivo.",effect3:"Marque «Eliminar también de las estadísticas» abajo para descartar también la contribución a las estadísticas rápidas (coincide con la opción de eliminación de un solo archivo). Esa vía es irreversible.",effect4:"Reimprimir un archivo actualiza su reloj de antigüedad, por lo que los archivos que aún usa están a salvo.",purgeStatsLabel:"Eliminar también de las estadísticas",purgeStatsHint:"Descarta los archivos coincidentes de las estadísticas rápidas (filamento, tiempo, coste, energía). Sin esto, las estadísticas rápidas conservan todas las contribuciones y solo los archivos abandonan el disco.",previewLoading:"Comprobando cuántos archivos coinciden…",previewFailed:"No se pudo previsualizar la purga.",previewSummary:"{{count}} archivos · {{size}} se eliminarían",andMore:"…y {{count}} más",warning:"Los archivos se eliminan del disco y no se pueden restaurar. Descargue o marque como favorito todo lo que desee conservar antes de continuar.",confirmCta:"Eliminar {{count}} archivo(s)",purging:"Eliminando…",toast:{success:"Se eliminaron {{count}} archivo(s).",failed:"No se pudieron purgar los archivos."}},archiveAutoPurge:{enableLabel:"Purgar automáticamente los archivos antiguos",enableDescription:"Una vez al día, oculta los archivos de los listados y elimina sus archivos del disco cuando no se han impreso dentro del umbral. Reimprimir un archivo reinicia el reloj.",ageLabel:"Eliminar automáticamente los archivos no impresos en los últimos",ageDescription:"Mínimo 7 días, máximo 10 años. Se basa en la finalización de la impresión más reciente — reimprimir un archivo actualiza su antigüedad. Elimina el 3MF, la miniatura, el time-lapse, el 3MF de origen, el F3D y las fotos.",days:"días",purgeStatsLabel:"Eliminar también de las estadísticas",purgeStatsDescription:"Cuando está activado, el barrido diario también descarta cada archivo purgado de las estadísticas rápidas (filamento, tiempo, coste, energía). Desactivado de forma predeterminada — las estadísticas rápidas conservan la contribución, solo los archivos abandonan el disco.",runNow:"Purgar los archivos ahora",saveFailed:"No se pudieron guardar los ajustes de purga automática."},cameraTokens:{title:"Tokens de API de la cámara",navTitle:"Tokens de API de la cámara",description:"Tokens de larga duración para incrustar la transmisión de la cámara en Home Assistant, Frigate, quioscos o cualquier otra herramienta que necesite una URL estable. Cada token es exclusivo de la transmisión de la cámara y se puede revocar en cualquier momento.",loading:"Cargando…",confirmRevoke:{title:"¿Revocar este token?",body:'Cualquier dispositivo que use "{{name}}" perderá el acceso de inmediato. Esto no se puede deshacer.',cancel:"Cancelar",confirm:"Revocar"},create:{title:"Crear nuevo token",nameLabel:"Nombre del token",namePlaceholder:"p. ej. Home Assistant",daysLabel:"Días hasta la caducidad",submit:"Crear",hint:"La vida útil máxima es de 365 días. El valor del token se muestra solo una vez al crearlo — cópielo ahora."},created:{title:"Token creado — cópielo ahora",warning:"Esta es la única vez que este token estará visible. Después de cerrar este diálogo no podrá volver a verlo nunca.",copy:"Copiar",dismiss:"Lo he guardado"},list:{myTitle:"Mis tokens",allTitle:"Todos los usuarios (vista de administración)",empty:"Aún no hay tokens.",name:"Nombre",owner:"Propietario",prefix:"Prefijo",created:"Creado",expires:"Caduca",lastUsed:"Usado por última vez",revoke:"Revocar",expired:"Caducado"},toast:{created:"Token creado",createFailed:"Error al crear el token",revoked:"Token revocado",revokeFailed:"Error al revocar el token",loadFailed:"Error al cargar los tokens",copied:"Copiado al portapapeles",copyFailed:"Error al copiar — selecciónelo y cópielo manualmente"}},forecast:{title:"Previsión",noSpools:"No se encontraron bobinas activas. Añada bobinas a su inventario para ver los datos de previsión.",noUsageData:"No hay datos de uso disponibles — no se puede proyectar la cronología de existencias.",sku:"SKU",material:"Material",stock:"Existencias",dailyRate:"Tasa",daysLeft:"Días restantes",emptyBy:"Se agota el",reorderBy:"Reabastecer antes del",actions:"Acciones",trend:"Tendencia",estimated:"Est.",noData:"Sin datos",timeframe:"Periodo",chartTitle:"Existencias previstas — Los 5 materiales principales",dashedLinesROP:"Líneas discontinuas = puntos de reabastecimiento",stockLevel:"Nivel de existencias",reorderPoint:"Punto de reabastecimiento",safetyMargin:"Margen de seguridad",trendLegend:"Tendencia (basada en el historial, nivel de servicio del 95%)",estimatedLegend:"Estimada (diferencia de peso)",noDataLegend:"Sin datos",ropLabel:"PR",ssLabel:"ES",safetyStockLegend:"Existencias de seguridad",stockArrivalLegend:"Llegada de existencias",stockoutLegend:"Rotura de existencias",alertCount_one:"{{count}} alerta",alertCount_other:"{{count}} alertas",order:"Pedir",save:"Guardar",cancel:"Cancelar",settingsSaved:"Ajustes guardados",failedSaveSettings:"Error al guardar los ajustes",globalLeadTimeSaved:"Plazo de entrega global guardado",globalLeadTime:"Plazo de entrega global",globalLeadTimeHint:"Mínimo del plazo de entrega global — se usa en el cálculo del punto de reabastecimiento para todos los SKU",skuLeadTimeOverride:"Anulación del plazo de entrega del SKU",skuLeadTimeHint:"0 = usar el plazo de entrega global. Establezca >0 para anularlo para este SKU.",safetyMarginLabel:"Margen de seguridad",effectiveLeadTime:"Plazo de entrega efectivo",effectiveLeadTimeHint:"máx(global {{global}} d, SKU {{sku}} d)",reorderPointHint:"d̄ × PE + margen de seguridad — pida cuando las existencias alcancen este nivel",safetyMarginHint:"Existencias de seguridad estadísticas (z=1,65 × σ × √PE) + margen definido por el usuario",safetyMarginHintDays:"Margen añadido sobre las existencias de seguridad estadísticas.{{approx}}",safetyMarginHintDaysApprox:" ≈ {{g}} g a la tasa actual.",safetyMarginHintG:"Margen de peso fijo añadido sobre las existencias de seguridad estadísticas.{{approx}}",safetyMarginHintGApprox:" ≈ {{days}} d a la tasa actual.",individualSpools:"Bobinas individuales",labelWeight:"Etiqueta",spoolCount_one:"{{count}} bobina",spoolCount_other:"{{count}} bobinas",stockBreakRisk:"Riesgo de rotura de existencias",stockBreakDetail:"Quedan {{days}} d, plazo de entrega {{lt}} d.",stockBreakBefore:"Rotura de existencias antes del reabastecimiento",reorderNow:"Reabastecer ahora",reorderTriggerPassed:"La fecha de activación {{date}} ha pasado.",shoppingList:"Lista de la compra",shoppingListItems_one:"({{count}} artículo)",shoppingListItems_other:"({{count}} artículos)",shoppingListEmpty:"La lista de la compra está vacía. Haga clic en el icono del carrito de cualquier fila para añadir artículos.",addToCart:"Añadir a la lista de la compra",alertsSnoozed:"Silenciar las alertas de este SKU",alertsEnabled:"Reactivar las alertas de este SKU",addedToCart:"Añadido a la lista de la compra",failedAddItem:"Error al añadir el artículo",listView:"Lista",logisticsView:"Logística",qty:"Cant.",weight:"Peso",leadTime:"Plazo de entrega",expectedRestock:"Reabastecimiento previsto",status:"Estado",note:"Nota",pending:"Pendiente",purchased:"Comprado",received:"Recibido",markPurchased:"Marcar como comprado",markReceived:"Marcar como recibido — añade bobinas al inventario de existencias",resetToPending:"Restablecer a pendiente",remove:"Quitar",clearAll:"Borrar todo",downloadCsv:"CSV",addToCartTitle:"Añadir a la lista de la compra",byQuantity:"Por cantidad",byDuration:"Por duración",numberOfSpools:"Número de bobinas",lastHowManyDays:"¿Cuántos días debería durar?",noUsageQty:"No hay datos de uso — cantidad establecida en 1.",noteOptional:"Nota (opcional)",notePlaceholder:"p. ej. para el proyecto X, urgente…",addNSpools_one:"Añadir {{count}} bobina",addNSpools_other:"Añadir {{count}} bobinas",onArrival:"A la llegada",stockBreakIn:"Rotura de existencias en {{days}} d.",stockRunsOutBefore:"Las existencias se agotan antes de que transcurra el plazo de entrega de {{lt}} d.",atRate:"A {{rate}} g/día necesita",moreSpools_one:"{{count}} bobina más",moreSpools_other:"{{count}} bobinas más",bridgeGap:"para cubrir el déficit.",noReadAccess:"No tiene permiso para ver las previsiones de inventario.",noWriteAccess:"No tiene permiso para modificar los ajustes de previsión."}},wpe={nav:{printers:"Imprimantes",archives:"Archives",queue:"File d'attente d'impression",stats:"Statistiques",profiles:"Profils",maintenance:"Maintenance",projects:"Projets",inventory:"Filament",files:"Gestionnaire de fichiers",makerworld:"MakerWorld",notifications:"Notifications",settings:"Paramètres",system:"Système",collapseSidebar:"Réduire la barre latérale",expandSidebar:"Développer la barre latérale",update:"Mise à jour",updateAvailable:"Mise à jour disponible : v{{version}}",updateAvailableBanner:"La version {{version}} est disponible !",viewUpdate:"Voir la mise à jour",viewOnGithub:"Voir sur GitHub",keyboardShortcuts:"Raccourcis clavier (?)",switchToLight:"Passer au mode clair",switchToDark:"Passer au mode sombre",switchToSystem:"Passer au mode système",smartSwitches:"Interrupteurs intelligents",logout:"Déconnexion",installApp:"Installer l'application",installAppSuccess:"Bambuddy a été installé"},common:{save:"Enregistrer",saving:"Enregistrement...",cancel:"Annuler",delete:"Supprimer",edit:"Modifier",add:"Ajouter",close:"Fermer",confirm:"Confirmer",loading:"Chargement...",error:"Erreur",errorLoading:"Erreur de chargement",retry:"Réessayer",success:"Succès",warning:"Avertissement",enabled:"Activé",disabled:"Désactivé",yes:"Oui",no:"Non",on:"On",off:"Désactivé",all:"Tous",none:"Aucun",search:"Rechercher",filter:"Filtrer",sort:"Trier",refresh:"Actualiser",download:"Télécharger",upload:"Téléverser",uploading:"Téléversement...",uploadFailed:"Échec du téléversement",actions:"Actions",status:"Statut",name:"Nom",description:"Description",date:"Date",time:"Heure",hours:"heures",minutes:"minutes",seconds:"secondes",days:"jours",enable:"Activer",disable:"Désactiver",permissions:"Autorisations",noPrinters:"Aucune imprimante configurée",noData:"Aucune donnée disponible",linkNotFound:"Lien non trouvé",required:"Requis",optional:"Optionnel",dismiss:"Ignorer",apply:"Appliquer",reset:"Réinitialiser",export:"Exporter",import:"Importer",clear:"Effacer",selectAll:"Tout sélectionner",deselectAll:"Tout désélectionner",noChange:"— Aucun changement —",unchanged:"Inchangé",unassigned:"Non assigné",unknown:"Inconnu",unknownError:"Erreur inconnue",today:"Aujourd'hui",tomorrow:"Demain",asap:"Dès que possible",overdue:"En retard",now:"Maintenant",collapse:"Réduire",expand:"Développer",viewArchive:"Voir l'archive",viewInFileManager:"Voir dans le gestionnaire de fichiers",addedBy:"Ajouté par {{username}}",prints:"impressions",more:"+{{count}} de plus",ascending:"Croissant",descending:"Décroissant",back:"Retour",copy:"Copier",copied:"Copié !",printer:"Imprimante",remove:"Retirer",type:"Type",print:"Imprimer",rename:"Renommer",move:"Déplacer",create:"Créer",duplicate:"Dupliquer",left:"Gauche",right:"Droite"},printers:{addPreflight:{checking:"Vérification de la connexion...",warning:"Certaines vérifications de connexion ont échoué. Cette imprimante pourrait apparaître hors ligne. Examinez les vérifications ci-dessous, corrigez ce que vous pouvez, ou enregistrez quand même.",back:"Retour",saveAnyway:"Enregistrer quand même"},title:"Imprimantes",addPrinter:"Ajouter une imprimante",editPrinter:"Modifier l'imprimante",deletePrinter:"Supprimer l'imprimante",printerName:"Nom de l'imprimante",serialNumber:"Numéro de série",ipAddress:"Adresse IP / Nom d'hôte",accessCode:"Code d'accès",model:"Modèle",nozzleCount:"Nombre de buses",autoArchive:"Auto-archivage",status:{available:"Disponible",idle:"Inactif",printing:"Impression en cours",paused:"En pause",offline:"Hors ligne",problem:"Problème",error:"Erreur",finished:"Terminé",unknown:"Inconnu"},temperatures:{nozzle:"Buse",bed:"Plateau",chamber:"Chambre"},progress:"{{percent}}% terminé",timeRemaining:"{{time}} restant",deleteConfirm:'Êtes-vous sûr de vouloir supprimer "{{name}}" ?',maintenanceOk:"Maintenance OK",maintenanceWarning:"{{count}} avertissement",maintenanceWarning_plural:"{{count}} avertissements",maintenanceDue:"{{count}} échéance",maintenanceDue_plural:"{{count}} échéances",sort:{name:"Nom",status:"Statut",model:"Modèle",location:"Emplacement",ascending:"Tri croissant",descending:"Tri décroissant"},cardSize:{small:"Petites cartes",medium:"Cartes moyennes",large:"Grandes cartes",extraLarge:"Très grandes cartes"},hideOffline:"Masquer hors ligne",nextAvailable:"Prochaine disponible",powerOn:"Allumer",offlinePrintersWithPlugs:"Imprimantes hors ligne avec prises connectées",noPrintersConfigured:"Aucune imprimante configurée pour le moment",search:"Rechercher des imprimantes...",noSearchResults:"Aucune imprimante ne correspond à votre recherche ou à vos filtres",filter:{allStatuses:"Tous les statuts",allLocations:"Tous les emplacements"},toolbar:{filters:"Filtres",view:"Vue",actions:"Actions"},readyToPrint:"Prête à imprimer",external:"Externe",extL:"Ext-L",extR:"Ext-R",deleteArchives:"Supprimer les archives d'impression",noLabel:"Pas d'étiquette",printPreview:"Aperçu avant impression",width:"Largeur",height:"Hauteur",noObjectsFound:"Aucun objet trouvé",objectsLoadedOnPrintStart:"Les objets sont chargés au début de l'impression",willBeSkipped:"Sera sauté",name:"Nom",serialCannotBeChanged:"Le numéro de série ne peut pas être modifié",locationHelp:"Utilisé pour grouper les imprimantes et filtrer la file d'attente",wifiSignal:{veryWeak:"Très faible",weak:"Faible",fair:"Moyen",good:"Bon",excellent:"Excellent"},maintenanceUpToDate:"Maintenance à jour - Cliquez pour voir",chamberLightOn:"Allumer la lumière de la chambre",chamberLightOff:"Éteindre la lumière de la chambre",files:"Fichiers",browseFiles:"Parcourir les fichiers de l'imprimante",autoOffAfterPrint:"Extinction auto après impression",autoOffExecuted:"Extinction auto exécutée - rallumez pour réinitialiser",hmsErrors:"Erreurs HMS",viewHmsErrors:"Voir {{count}} erreur(s) HMS",resume:"Reprendre",pause:"Pause",stop:"Arrêter",camera:"Caméra",skipObject:"Sauter l'objet",reconnect:"Reconnecter",forceRefresh:"Forcer l'actualisation",forceRefreshSuccess:"Actualisation demandée",mqttDebug:"Débogage MQTT",printerInformation:"Informations imprimante",copyToClipboard:"Copier",copied:"Copié !",state:"État",wifiSignalLabel:"Signal WiFi",developerMode:"Mode développeur",enabled:"Activé",disabled:"Désactivé",addedOn:"Ajoutée le",sdCard:"Carte SD",inserted:"Insérée",notInserted:"Non insérée",totalPrintHours:"Heures d'impression",activeNozzle:"Active : buse {{nozzle}}",nozzleRack:"Rack à buses",nozzleDocked:"Rangée",nozzleMounted:"Montée",nozzleActive:"Actif",nozzleIdle:"Inactive",nozzleDiameter:"Diamètre",nozzleType:"Type",nozzleStatus:"Statut",nozzleFilament:"Filament",nozzleWear:"Usure",nozzleMaxTemp:"Temp Max",nozzleSerial:"Série",nozzleHardenedSteel:"Acier Trempé",nozzleStainlessSteel:"Acier Inoxydable",nozzleTungstenCarbide:"Carbure de Tungstène",nozzleFlow:"Débit",nozzleHighFlow:"Haut débit",nozzleStandardFlow:"Standard",firmwareUpdate:"Mise à jour Firmware",firmwareInstructions:"Sur l'écran de l'imprimante, allez dans",firmwareNav:"Naviguez vers",settings:"Paramètres",firmware:"Micrologiciel",discoverPrinters:"Découvrir les imprimantes",searching:"Recherche...",manualEntry:"Saisie manuelle",addFromCloud:"Ajouter depuis le Cloud",toast:{printerDeleted:"Imprimante supprimée",missingSpoolAssignment:"Impression démarrée sur {{printer}}. Attribution de bobine manquante pour : {{slots}}",printerAdded:"Imprimante ajoutée",printerUpdated:"Imprimante mise à jour",failedToDelete:"Échec de la suppression",failedToAdd:"Échec de l'ajout",connectionFailedNotAdded:"Connexion à l'imprimante impossible. Vérifiez l'IP, le numéro de série et le code d'accès, et confirmez que le mode LAN-only est activé. L'imprimante n'a pas été ajoutée.",failedToUpdate:"Échec de la mise à jour",commandSent:"Commande envoyée",failedToSendCommand:"Échec de l'envoi de la commande",turnedOn:"{{name}} allumée",failedToPowerOn:"Échec de l'allumage de {{name}}",scriptTriggered:"Script déclenché",printStopped:"Impression arrêtée",printPaused:"Impression en pause",printResumed:"Impression reprise",referenceDeleted:"Référence supprimée",detectionAreaSaved:"Zone de détection enregistrée",failedToRunScript:"Échec du script",failedToStopPrint:"Échec de l'arrêt",failedToPausePrint:"Échec de la mise en pause",failedToResumePrint:"Échec de la reprise",failedToControlChamberLight:"Échec du contrôle de la lumière",failedToSetSpeed:"Échec du réglage de la vitesse",failedToUpdateSetting:"Échec de mise à jour du paramètre",failedToSkipObjects:"Échec du saut d'objets",failedToRereadRfid:"Échec lecture RFID",failedToCheckPlate:"Échec vérification plateau",failedToUpdateLabel:"Échec mise à jour étiquette",failedToDeleteReference:"Échec suppression référence",failedToSaveDetectionArea:"Échec enregistrement zone",plateCheckEnabled:"Vérification plateau activée",plateCheckDisabled:"Vérification plateau désactivée",calibrationSaved:"Calibration enregistrée !",calibrationFailed:"Échec de la calibration",rfidRereadInitiated:"Lecture RFID initiée",loadInitiated:"Chargement du filament…",unloadInitiated:"Déchargement du filament…",failedToLoad:"Échec du chargement du filament",failedToUnload:"Échec du déchargement du filament"},connection:{connected:"Connecté",offline:"Hors ligne"},plateStatus:{markCleared:"Marquer le plateau comme dégagé",cleared:"Plateau dégagé",notCleared:"Plateau non dégagé",inUse:"Plateau en cours d'utilisation"},queue:{inQueue:"{{count}} impression en file",inQueue_plural:"{{count}} impressions en file"},controls:"Contrôles",rfid:{reread:"Relire RFID"},ams:{load:"Charger",unload:"Décharger"},bedJog:{title:"Déplacer le plateau",bed:"Plateau",step:"Pas (mm)",up:"Monter le plateau",down:"Descendre le plateau",disabledWhilePrinting:"Désactivé pendant l'impression",notHomedTitle:"Imprimante non référencée",notHomedMessage:"L'imprimante n'a pas été référencée depuis la dernière impression. Lancez la référence automatique d'abord pour un positionnement sûr (parque la tête d'outil, puis référence X, Y et Z), ou déplacez quand même — les butées logicielles seront ignorées.",homeZ:"Référence automatique",moveAnyway:"Déplacer quand même",homingStarted:"Référencement automatique en cours…"},permission:{noAdd:"Pas d'autorisation pour ajouter",noEdit:"Pas d'autorisation pour modifier",noDelete:"Pas d'autorisation pour supprimer",noControl:"Pas d'autorisation pour contrôler",noFiles:"Pas d'autorisation pour les fichiers",noAmsRfid:"Pas d'autorisation pour le RFID",noSmartPlugControl:"Pas d'autorisation pour les prises",noCamera:"Pas d'autorisation pour les caméras"},modal:{addTitle:"Ajouter une imprimante",editTitle:"Modifier l'imprimante",myPrinter:"Mon imprimante",selectModel:"Choisir un modèle...",locationGroup:"Emplacement / Groupe (optionnel)",locationPlaceholder:"ex: Atelier, Bureau",autoArchiveLabel:"Auto-archiver les impressions terminées",fromPrinterSettings:"Depuis les paramètres imprimante",modelOptional:"Modèle (optionnel)",saveChanges:"Enregistrer les modifications"},skipObjects:{tooltip:"Sauter des objets",onlyWhilePrinting:"Sauter (uniquement pendant l'impression)",requiresMultiple:"Sauter (nécessite 2+ objets)",title:"Sauter des objets",matchIdsInfo:"Faites correspondre les IDs avec l'écran de l'imprimante",printerShowsIds:"L'écran affiche les IDs des objets sur le plateau",skipSelected:"Sauter la sélection",skipping:"Saut en cours...",noObjectsSelected:"Aucun objet sélectionné",selectObjectsToSkip:"Sélectionnez les objets à ignorer",skipped:"sauté",objectsSkipped:"Objets sautés",activeCount:"{{count}} actifs",waitForLayer:"Attendez la couche 2 pour sauter des objets (actuelle : {{layer}})",skip:"Sauter",confirmTitle:"Sauter l'objet ?",confirmMessage:'Voulez-vous vraiment sauter "{{name}}" ? Cette action est irréversible.'},confirm:{deleteTitle:"Supprimer l'imprimante",deleteMessage:'Supprimer "{{name}}" ? Cela retirera tous les paramètres de connexion.',deleteArchivesNote:"Tout l'historique sera définitivement supprimé.",keepArchivesNote:"L'historique sera conservé mais plus associé à cette imprimante.",stopTitle:"Arrêter l'impression",stopMessage:`Arrêter l'impression sur "{{name}}" ?`,stopButton:"Arrêter",pauseTitle:"Mettre en pause",pauseMessage:`Mettre en pause l'impression sur "{{name}}" ?`,pauseButton:"Pause",resumeTitle:"Reprendre l'impression",resumeMessage:`Reprendre l'impression sur "{{name}}" ?`,resumeButton:"Reprendre",powerOnTitle:"Allumer l'imprimante",powerOnMessage:'Allumer "{{name}}" ?',powerOnButton:"Allumer",powerOffTitle:"Éteindre l'imprimante",powerOffMessage:'Éteindre "{{name}}" ?',powerOffWarning:`ATTENTION : "{{name}}" imprime ! L'éteindre maintenant peut endommager l'imprimante.`,powerOffButton:"Éteindre",haToggleTitle:'Basculer "{{name}}"',haToggleMessage:"Basculer l'entité Home Assistant {{entity}} ? Cela peut couper l'alimentation si elle est actuellement activée.",haToggleWarning:`ATTENTION : "{{name}}" imprime ! Basculer {{entity}} peut couper l'alimentation et interrompre l'impression. Continuer ?`,haToggleButton:"Basculer"},bulk:{select:"Sélectionner",selectAll:"Tout sélectionner",selectByLocation:"Sélectionner par emplacement",selected:"{{count}} sélectionné(s)",actions:{stop:"Arrêter",pause:"Pause",resume:"Reprendre",clearPlate:"Vider le plateau",clearHMS:"Effacer les notifications"},confirm:{stopTitle:"Arrêter {{count}} impressions",stopMessage:"Cela annulera les impressions actives sur {{count}} imprimante(s). Cette action est irréversible.",stopButton:"Tout arrêter",pauseTitle:"Mettre en pause {{count}} impressions",pauseMessage:"Cela mettra en pause les impressions actives sur {{count}} imprimante(s).",pauseButton:"Tout mettre en pause",clearPlateTitle:"Vider {{count}} plateaux",clearPlateMessage:"Cela videra le plateau sur {{count}} imprimante(s) et pourrait lancer les travaux en file d'attente.",clearPlateButton:"Tout vider"},success:"{{action}} terminé sur {{count}} imprimante(s)",partial:"{{succeeded}} réussi(s), {{failed}} échoué(s)",noneApplicable:"Aucune imprimante sélectionnée n'est dans le bon état pour cette action",selectByState:"Sélectionner par état"},discovery:{title:"Découvrir les imprimantes",searching:"Recherche...",scanning:"Scan en cours...",scanProgress:"Scan... {{scanned}}/{{total}}",foundPrinters:"{{count}} imprimante(s) trouvée(s)",noPrintersFound:"Aucune imprimante trouvée",noPrintersFoundSubnet:"Aucune imprimante dans ce sous-réseau.",noPrintersFoundNetwork:"Aucune imprimante sur le réseau.",allConfigured:"Toutes les imprimantes trouvées sont déjà configurées.",alreadyAdded:"Déjà ajoutée",select:"Sélectionner",manualEntry:"Saisie manuelle",addFromCloud:"Ajouter depuis le Cloud",subnetToScan:"Sous-réseau à scanner",dockerNote:"Docker détecté. Entrez le sous-réseau en notation CIDR. Nécessite network_mode: host.",scanSubnet:"Scanner le sous-réseau",discoverNetwork:"Découvrir sur le réseau",scanningSubnet:"Scan du sous-réseau pour imprimantes Bambu...",scanningNetwork:"Scan du réseau...",serialRequired:"Série requis",unknown:"Inconnu",failedToStart:"Échec du démarrage de la découverte",customSubnetOption:"Sous-réseau personnalisé...",customSubnetLabel:"Sous-réseau personnalisé (CIDR)",customSubnetNote:"Utilisez un sous-réseau personnalisé si votre imprimante se trouve sur un réseau différent de celui de ce serveur. Les ports FTP (990) et MQTT (8883) doivent être accessibles à travers la limite de routage."},drying:{start:"Démarrer le séchage",stop:"Arrêter le séchage",temperature:"Température",duration:"Durée",hours:"heures",timeRemaining:"{{time}} restant",active:"Séchage",notSupported:"Séchage non pris en charge",powerRequired:"Brancher l'adaptateur secteur AMS pour activer le séchage",startingDrying:"Démarrage du séchage...",stoppingDrying:"Arrêt du séchage...",rotateTray:"Tourner la bobine pendant le séchage"},filaments:"Filaments",openCameraOverlay:"Ouvrir la caméra en superposition",openCameraWindow:"Ouvrir la caméra dans une fenêtre",firmwareUpdateAvailable:"Mise à jour firmware : {{current}} → {{latest}}",firmwareUpToDate:"Firmware {{version}} — À jour",firmwareUpdateButton:"Mettre à jour",plateDetection:{noPermission:"Pas d'autorisation de modification",enabledClick:"Vérification activée - Cliquez pour désactiver",disabledClick:"Vérification désactivée - Cliquez pour activer",manageCalibration:"Gérer la calibration de détection",calibrationRequired:"Calibration requise",calibrationInstructions:"Videz le plateau, puis cliquez sur Calibrer.",calibrationDescription:"Capture une image de référence du plateau vide.",calibrationTip:"Conseil : Stockez jusqu'à 5 références. Le système utilise la meilleure correspondance.",plateEmpty:"Le plateau semble vide",objectsDetected:"Objets détectés sur le plateau",confidence:"Confiance",difference:"Différence",analysisPreview:"Aperçu de l'analyse :",analysisLegend:"Cadre vert = zone, Rouge = différences",savedReferences:"Références ({{count}}/{{max}})",deleteReference:"Supprimer la référence",labelPlaceholder:"Étiquette...",clickToEdit:"{{label}} - Modifier",clickToAddLabel:"Ajouter une étiquette"},speed:{title:"Vitesse d'impression",silent:"Silencieux (50%)",standard:"Standard (100%)",sport:"Sport (124%)",ludicrous:"Ludicrous (166%)"},airduct:{title:"Mode conduit d'air",cooling:"Refroidissement",heating:"Chauffage"},noSdCard:"Pas de SD",door:{open:"Ouverte",closed:"Fermée"},fans:{partCooling:"Ventilateur pièce",auxiliary:"Ventilateur auxiliaire",chamber:"Ventilateur chambre"},clickToViewHmsErrors:"Cliquez pour voir les erreurs HMS",estimatedCompletion:"Fin estimée",plateNumber:"Plaque {{number}}",slotOptions:"Options du slot",amsPopup:{friendlyName:"Nom AMS",friendlyNamePlaceholder:"ex. Nom convivial AMS",serialNumber:"Numéro de série",firmwareVersion:"Micrologiciel",save:"Enregistrer",clear:"Effacer",noEditPermission:"Vous n'avez pas la permission de renommer les unités AMS"},firmwareModal:{title:"Mise à jour Firmware",titleUpToDate:"Infos Firmware",currentVersion:"Actuelle :",latestVersion:"Dernière :",releaseNotes:"Notes de version",checkingPrereqs:"Vérification des prérequis...",sdCardReady:"Carte SD prête. Cliquez pour téléverser.",uploadedSuccess:"Firmware téléversé !",applyInstructions:"Pour appliquer sur l'imprimante :",step1:"Sur l'écran, allez dans Paramètres",step2:"Allez dans Firmware",step3:'Sélectionnez "Mettre à jour depuis carte SD"',step4:"Prévoyez 10-20 minutes",done:"Terminé",starting:"Démarrage...",uploadFirmware:"Téléverser le Firmware",uploadFailed:"Échec du téléversement : {{error}}",uploadedToast:"Firmware téléversé ! Lancez la mise à jour sur l'écran.",availableVersions:"Versions disponibles",usable:"Utilisable",unavailable:"Indisponible",installed:"Installé",newerBadge:"plus récent",olderBadge:"plus ancien",currentBadge:"actuel"},accessCodePlaceholder:"Laissez vide pour garder l'actuel",roi:{title:"Zone de détection (ROI)",xStart:"Début X",yStart:"Début Y",width:"Largeur",height:"Hauteur",instruction:"Ajustez le cadre vert pour cibler le plateau."},developerModeWarning:"Le mode développeur LAN n'est pas activé sur : {{names}}. Certaines fonctionnalités peuvent ne pas fonctionner.",howToEnable:"Comment activer",incompatibleFile:"Ce fichier a été tranché pour {{slicedFor}}, mais cette imprimante est une {{printerModel}}",dropNotPrintable:"Seuls les fichiers .gcode et .gcode.3mf peuvent être imprimés",dropToPrint:"Déposer pour imprimer",cannotPrint:"Imprimante occupée"},archives:{title:"Archives d'impression",searchPlaceholder:"Chercher dans les archives...",filterByPrinter:"Par imprimante",filterByStatus:"Par statut",sortBy:"Trier par",sortNewest:"Plus récent",sortOldest:"Plus ancien",sortName:"Nom",sortDuration:"Durée",sortLargest:"Plus volumineux",sortSmallest:"Plus léger",sortSize:"Taille",noArchives:"Aucune archive trouvée",noArchivesSearch:"Aucune archive ne correspond",originalPrintNotVisible:"Impression d'origine non visible - essayez d'effacer les filtres",noArchivesYet:"Pas encore d'archive",prints:"impressions",pagination:{showing:"Affichage",to:"à",of:"sur",show:"Afficher",page:"Page",all:"Tout"},loadingArchives:"Chargement...",releaseToUpload:"Relâcher pour téléverser",showAll:"Tout afficher",showFavoritesOnly:"Favoris uniquement",gridView:"Grille",listView:"Liste",calendarView:"Calendrier",logView:"Journal d'impression",manageTags:"Gérer les tags",showFailedPrints:"Afficher les échecs",hideFailedPrints:"Masquer les échecs",hideDuplicates:"Masquer les doublons",viewOriginalPrint:"Cliquez pour afficher l'impression originale (#{{id}})",printTime:"Temps d'impression",filamentUsed:"Filament utilisé",cost:"Coût",reprint:"Réimprimer",preview:"Aperçu",deleteArchive:"Supprimer l'archive",deleteConfirm:"Supprimer cette archive ?",favorite:"Favori",unfavorite:"Retirer des favoris",viewDetails:"Détails",status:{completed:"Réussi",failed:"Échoué",stopped:"Arrêté"},toast:{source3mfAttached:"Source 3MF attachée : {{filename}}",failedUploadSource3mf:"Échec téléversement 3MF",source3mfRemoved:"Source 3MF retirée",failedRemoveSource3mf:"Échec retrait 3MF",f3dAttached:"F3D attaché : {{filename}}",failedUploadF3d:"Échec téléversement F3D",f3dRemoved:"F3D retiré",failedRemoveF3d:"Échec retrait F3D",timelapseAttached:"Timelapse attaché : {{filename}}",timelapseAlreadyAttached:"Timelapse déjà présent",noMatchingTimelapse:"Pas de timelapse correspondant",failedScanTimelapse:"Échec scan timelapse",failedAttachTimelapse:"Échec attache timelapse",timelapseRemoved:"Timelapse supprimé",failedRemoveTimelapse:"Échec de la suppression du timelapse",timelapseUploaded:"Timelapse importé : {{filename}}",failedUploadTimelapse:"Échec de l'importation du timelapse",archiveDeleted:"Archive supprimée",failedDeleteArchive:"Échec suppression",addedToFavorites:"Ajouté aux favoris",removedFromFavorites:"Retiré des favoris",projectUpdated:"Projet mis à jour",failedUpdateProject:"Échec mise à jour projet",linkCopied:"Lien copié",failedCopyLink:"Échec copie lien",photoDeleted:"Photo supprimée",failedDeletePhoto:"Échec suppression photo",failedDeleteArchives:"Échec suppression archives",failedUpdateFavorites:"Échec mise à jour favoris",exportDownloaded:"Export téléchargé",exportFailed:"Échec export"},menu:{print:"Imprimer",schedule:"Planifier",openInBambuStudio:"Ouvrir dans le Slicer",slice:"Découper",externalLink:"Lien externe",viewOnMakerWorld:"Voir sur MakerWorld",preview3d:"Aperçu 3D",viewTimelapse:"Voir le Timelapse",scanForTimelapse:"Scanner pour Timelapse",uploadTimelapse:"Importer un timelapse",removeTimelapse:"Supprimer le timelapse",downloadSource3mf:"Télécharger Source 3MF",uploadSource3mf:"Téléverser Source 3MF",replaceSource3mf:"Remplacer Source 3MF",removeSource3mf:"Retirer Source 3MF",uploadF3d:"Téléverser F3D",replaceF3d:"Remplacer F3D",downloadF3d:"Télécharger F3D",removeF3d:"Retirer F3D",download:"Télécharger",copyDownloadLink:"Copier lien de téléchargement",qrCode:"Code QR",viewPhotos:"Voir les photos",viewPhotosCount:"Voir les photos ({{count}})",projectPage:"Page du Projet",addToFavorites:"Ajouter aux favoris",removeFromFavorites:"Retirer des favoris",edit:"Modifier",printLog:"Journal d'impression",goToProject:"Aller au Projet : {{name}}",addToProject:"Ajouter au Projet",removeFromProject:"Retirer du Projet",loading:"Chargement...",noProjectsAvailable:"Aucun projet disponible",searchProjects:"Rechercher des projets…",select:"Sélectionner",deselect:"Désélectionner",delete:"Supprimer"},permission:{noReprint:"Pas d'autorisation de réimpression",noAddToQueue:"Pas d'autorisation pour la file",noUpdateArchives:"Pas d'autorisation de mise à jour",noUploadFiles:"Pas d'autorisation de téléversement",noDownload:"Pas d'autorisation de téléchargement",noCopyLink:"Pas d'autorisation de copie lien",noDelete:"Pas d'autorisation de suppression",noCreate:"Pas d'autorisation de création"},platePicker:{title:"Choisir une plaque à prévisualiser",hint:"Cette archive contient plusieurs plaques. Sélectionnez-en une pour l'ouvrir dans la visionneuse GCode.",plateLabel:"Plaque {{index}}",objectCount:"{{count}} objet",objectCount_plural:"{{count}} objets",noGcode:"Cette archive ne contient pas de G-code généré à prévisualiser. Ouvrez-la d'abord dans Bambu Studio pour la trancher."},card:{previousPlate:"Plateau précédent",nextPlate:"Plateau suivant",plateNumber:"Plateau {{index}}",moreOptions:"Clic droit pour plus d'options",addToFavorites:"Ajouter aux favoris",removeFromFavorites:"Retirer des favoris",cancelled:"annulé",failed:"échoué",duplicate:"doublon",duplicateTitle:"Ce modèle a déjà été imprimé",openSource3mf:"Ouvrir 3MF dans Bambu Studio (clic droit pour plus)",downloadF3d:"Télécharger fichier Fusion 360",viewTimelapse:"Voir timelapse",viewPhoto:"Voir 1 photo",viewPhotos:"Voir {{count}} photos",openFolder:"Ouvrir le dossier : {{name}}",slicedFile:"Fichier découpé - prêt",sourceFile:"Fichier source uniquement - pas de mapping AMS",gcode:"GCODE",source:"SOURCE",project:"Projet : {{name}}",runsBadge:"{{count}} impressions",runsBadgeTitle:"{{count}} impressions au total — {{successful}} réussies, {{failed}} échouées. Cliquez pour voir le journal complet.",estimated:"Estimé : {{time}}",actual:"Réel : {{time}}",accuracy:"Précision : {{percent}}%",filament:"{{weight}} g",layer:"{{count}} couche",layers:"{{count}} couches",object:"{{count}} objet",objects:"{{count}} objets",slicedFor:"Découpé pour {{model}}",uploadedBy:"Téléversé par",noPermissionReprint:"Pas d'autorisation de réimpression",noFileForReprint:"Aucun fichier 3MF disponible — le fichier n'a pas pu être téléchargé depuis l'imprimante lors de l'enregistrement",noPermissionEdit:"Pas d'autorisation de modification",noPermissionDelete:"Pas d'autorisation de suppression",reprint:"Réimprimer",schedulePrint:"Planifier",schedule:"Planifier",openInBambuStudio:"Ouvrir dans le Slicer",openInBambuStudioToSlice:"Ouvrir dans le Slicer pour découper",slice:"Découper",externalLink:"Lien externe",makerWorld:"MakerWorld : {{designer}}",viewProject:"Voir projet",noExternalLink:"Aucun lien externe",preview3d:"Aperçu 3D",download:"Télécharger",edit:"Modifier",delete:"Supprimer"},runLog:{title:"Journal d'impression",modalTitle:"Journal d'impression — {{name}}",modalTitleFallback:"cette archive",empty:"Aucun événement d'impression enregistré pour cette archive.",col:{date:"Date",status:"Statut",duration:"Durée",filament:"Filament",cost:"Coût"},status:{completed:"Terminé",failed:"Échoué",cancelled:"Annulé",stopped:"Arrêté",skipped:"Ignoré",printing:"Impression en cours"}},modal:{deleteArchive:"Supprimer l'archive",deleteConfirm:'Supprimer "{{name}}" ? Cette action est irréversible.',deleteButton:"Supprimer",deletePurgeStats:"Retirer également cette impression des Quick Stats (filament, temps, coût, énergie)",removeSource3mf:"Retirer Source 3MF",removeSource3mfConfirm:'Retirer le fichier 3MF de "{{name}}" ?',removeButton:"Retirer",removeF3d:"Retirer F3D",removeF3dConfirm:'Retirer le fichier Fusion 360 de "{{name}}" ?',removeTimelapse:"Supprimer le timelapse",removeTimelapseConfirm:'Êtes-vous sûr de vouloir supprimer la vidéo timelapse de "{{name}}" ?',timelapse:"{{name}} – Timelapse",selectTimelapse:"Choisir un Timelapse",selectTimelapseDesc:"Sélectionnez manuellement le timelapse :",deleteArchives:"Supprimer les archives",deleteArchivesConfirm:"Supprimer {{count}} archive(s) ?",deleteCount:"Supprimer {{count}}"},page:{title:"Archives",printsCount:"{{filtered}} sur {{total}} impressions",dropFilesHere:"Déposez les fichiers .3mf ici",releaseToUpload:"Relâcher pour téléverser",only3mfSupported:"Seuls les fichiers .3mf sont supportés",close:"Fermer",selected:"{{count}} sélectionnés",selectAll:"Tout sélectionner",tags:"Étiquettes",project:"Projet",favorite:"Favori",delete:"Supprimer",toggledFavorites:"Favoris mis à jour pour {{count}} archive(s)",failedUpdateFavorites:"Échec mise à jour favoris",archivesDeleted:"{{count}} archive(s) supprimée(s)",failedDeleteArchives:"Échec suppression",photoDeleted:"Photo supprimée",failedDeletePhoto:"Échec suppression photo"},list:{name:"Nom",printer:"Imprimante",date:"Date",size:"Taille",actions:"Actions",hasTimelapse:"A un timelapse"},log:{date:"Date",printName:"Nom de l'impression",printer:"Imprimante",user:"Utilisateur",status:"Statut",duration:"Durée",filament:"Filament",allPrinters:"Toutes les imprimantes",allUsers:"Tous les utilisateurs",allStatuses:"Tous les statuts",cancelled:"Annulé",skipped:"Ignoré",dateFrom:"Du",dateTo:"Au",noEntries:"Aucune entrée de journal trouvée",showing:"{{count}} sur {{total}} entrées",rowsPerPage:"Lignes",page:"Page",prev:"Préc.",next:"Suiv.",clearLog:"Effacer le journal",clearLogTitle:"Effacer le journal d'impression",clearLogConfirm:"Toutes les entrées du journal d'impression seront supprimées définitivement. Les archives et les éléments de file d'attente ne sont pas affectés. Cette action est irréversible. Êtes-vous sûr ?",clearLogButton:"Tout effacer",cleared:"{{count}} entrées de journal effacées",clearFailed:"Échec de l'effacement du journal d'impression"}},queue:{filamentShort:{rowBadge:"Filament insuffisant pour la bobine assignee",rowTooltip:"Le planificateur a signale cet element. Cliquez sur Lecture pour voir le deficit par emplacement et decider de lancer quand meme l'impression.",confirmTitle:"Filament insuffisant",confirmIntro:"La bobine assignee ne peut pas couvrir au moins un emplacement. Imprimer quand meme ?",lineItem:"Emplacement {{slot}} : besoin de {{required}} g, {{remaining}} g restants",unknown:"inconnu",printAnyway:"Imprimer quand meme"},title:"File d'attente",subtitle:"Gérez vos travaux d'impression",addToQueue:"Ajouter à la file",print:"Imprimer",reprint:"Réimprimer",schedulePrint:"Planifier",editQueueItem:"Modifier l'élément",printToPrinters:"Imprimer sur {{count}} imprimantes",queueToPrinters:"Ajouter à la file pour {{count}} imprimantes",queueSelectedPlates:"Ajouter {{count}} plaques à la file",selectAllPlates:"Sélectionner les {{count}} plaques",deselectAll:"Tout désélectionner",printQueued:"Impression ajoutée à la file",itemsQueued:"{{count}} éléments ajoutés à la file",sending:"Envoi...",sendingProgress:"Envoi {{current}}/{{total}}...",adding:"Ajout...",addingProgress:"Ajout {{current}}/{{total}}...",savingProgress:"Enregistrement {{current}}/{{total}}...",clearQueue:"Vider la file",clearHistory:"Effacer l'historique",emptyQueue:"La file est vide",position:"Position",scheduledTime:"Heure prévue",moveUp:"Monter",moveDown:"Descendre",startNow:"Démarrer maintenant",printingInProgress:"Impression en cours...",viewArchive:"Voir l'archive",viewInFileManager:"Voir dans le gestionnaire",itemCount:"{{count}} élément",itemCount_plural:"{{count}} éléments",dragToReorder:"Glisser pour réordonner (ASAP uniquement)",reorderHint:"La position n'affecte que les éléments ASAP.",sjf:{label:"SJF",tooltip:"Travail le plus court en premier — le planificateur priorise les impressions plus courtes"},addedBy:"Ajouté par {{name}}",nextInQueue:"Prochain en file",clearPlateSuccess:"Plateau vidé — prêt pour l'impression suivante",plateNumber:"Plateau {{index}}",quantity:"Quantité",quantityHint:"Crée {{count}} éléments de file d'attente",activeBatches:"Lots actifs",batchProgress:"{{completed}} sur {{total}} terminés",cancelBatch:"Annuler les restants",batchCancelled:"Éléments restants du lot annulés",cancelBatchConfirmTitle:"Annuler le lot",cancelBatchConfirmMessage:"Annuler tous les éléments en attente restants dans ce lot ?",batch:"Lot",sections:{currentlyPrinting:"En cours",queued:"En attente",history:"Historique"},status:{pending:"En attente",waiting:"En attente",printing:"Impression",paused:"En pause",completed:"Terminé",failed:"Échoué",skipped:"Sauté",cancelled:"Annulé"},summary:{printing:"Impressions",queued:"En attente",totalTime:"Temps total estimé",totalWeight:"Poids total estimé",history:"Historique"},filter:{allPrinters:"Toutes les imprimantes",unassigned:"Non assigné",allStatus:"Tous les statuts",allLocations:"Tous les emplacements",any:"Tout"},sort:{byPosition:"Par position",byName:"Par nom",byPrinter:"Par imprimante",bySchedule:"Par planification",byDate:"Par date",ascendingOldest:"Croissant (plus vieux)",descendingNewest:"Décroissant (plus récent)"},badges:{staged:"Préparé",requiresPrevious:"Nécessite succès précédent",autoPowerOff:"Extinction auto",gcodeInjection:"G-code"},empty:{title:"Aucune impression prévue",description:"Planifiez depuis les Archives ou glissez des fichiers ici."},time:{asap:"Dès que possible",overdue:"En retard",now:"Maintenant",lessThanMinute:"Dans moins d'une minute",inMinutes:"Dans {{count}} min",inHours:"Dans {{count}} heures"},actions:{stopPrint:"Arrêter",startPrint:"Démarrer",requeue:"Remettre en file"},bulkEdit:{title:"Modifier {{count}} élément",title_plural:"Modifier {{count}} éléments",description:"Seuls les changements seront appliqués.",printer:"Imprimante",noChange:"— Aucun changement —",queueOptions:"Options de file",staged:"Préparé (manuel)",autoPowerOff:"Extinction auto après",requirePrevious:"Requiert succès précédent",printOptions:"Options d'impression",bedLevelling:"Nivellement plateau",flowCalibration:"Calibration débit",vibrationCalibration:"Vibration (Input Shaper)",layerInspection:"Inspection 1ère couche",timelapse:"Time-lapse",useAms:"Utiliser AMS",applyChanges:"Appliquer",selectAll:"Tout sélectionner",deselectAll:"Tout désélectionner",selected:"{{count}} sélectionnés",editSelected:"Modifier la sélection",cancelSelected:"Annuler la sélection"},confirm:{cancelTitle:"Annuler l'impression prévue",cancelMessage:'Annuler "{{name}}" ?',stopTitle:"Arrêter l'impression",stopMessage:`Arrêter "{{name}}" sur l'imprimante ?`,removeTitle:"Retirer de l'historique",removeMessage:`Retirer "{{name}}" de l'historique ?`,clearHistoryTitle:"Effacer l'historique",clearHistoryMessage:"Retirer les {{count}} éléments ?",cancelButton:"Annuler l'impression",stopButton:"Arrêter l'impression",thisPrint:"cette impression",thisItem:"cet élément"},toast:{cancelled:"Élément annulé",cancelFailed:"Échec annulation",removed:"Élément retiré",removeFailed:"Échec retrait",stopped:"Impression arrêtée",stopFailed:"Échec arrêt",released:"Libéré dans la file",startFailed:"Échec démarrage",reorderFailed:"Échec réorganisation",historyCleared:"{{count}} éléments effacés",clearHistoryFailed:"Échec effacement",updateFailed:"Échec mise à jour",bulkCancelled:"{{count}} éléments annulés",bulkCancelFailed:"Échec annulation"},timeline:{listView:"Liste",timelineView:"Chronologie",unassigned:"Non attribué",noData:"Aucune impression planifiée pour ce jour",allDoneBy:"Toutes les impressions terminées vers {{time}}",staged:"En attente",filterAll:"Tout afficher",filterPrinting:"En cours",filterQueued:"En file",time:{anyMoment:"imminent",minutesLeft:"{{minutes}}m restantes",hoursLeft:"{{hours}}h restantes",hoursMinutesLeft:"{{hours}}h {{minutes}}m restantes"},day:{previous:"Jour précédent",next:"Jour suivant",today:"Aujourd'hui"}},permissions:{noStopPrint:"Pas d'autorisation d'arrêt",noStartPrint:"Pas d'autorisation de démarrage",noEdit:"Pas d'autorisation de modification",noCancel:"Pas d'autorisation d'annulation",noRequeue:"Pas d'autorisation de remise en file",noRemove:"Pas d'autorisation de retrait",noClearHistory:"Pas d'autorisation historique",noEditItems:"Pas d'autorisation modification groupée",noCancelItems:"Pas d'autorisation annulation groupée"}},backgroundDispatch:{unknownFile:"Fichier inconnu",unknownPrinter:"Imprimante inconnue",startingPrints:"Démarrage des impressions",progressSummary:"{{complete}}/{{total}} terminés • Envoyés : {{dispatched}} • En cours : {{processing}}",expandDetails:"Expand dispatch details",collapseDetails:"Collapse dispatch details",dismissToast:"Ignorer la notification d'envoi",cancelDispatchJob:"Annuler l'envoi",cancel:"Annuler",cancelling:"Annulation…",awaitingPrinter:"En attente de l'imprimante…",status:{dispatched:"Dispatché",processing:"Traitement",completed:"Terminé",failed:"Échoué",cancelled:"Annulé"},toast:{cancellingUpload:"Cancelling upload...",cancelled:"Envoi annulé",cancelFailed:"Échec de l'annulation de l'envoi",completeWithFailures:"Envoi en arrière-plan terminé : {{completed}} réussi(s), {{failed}} échoué(s)",completeSuccess:"Envoi en arrière-plan terminé : {{completed}} réussi(s)",printStartedRemaining:"{{completed}} impression(s) lancée(s), {{remaining}} en cours d'envoi..."}},stats:{title:"Statistiques",subtitle:"Glissez les widgets pour réorganiser. Cliquez sur l'œil pour masquer.",overview:"Vue d'ensemble",totalPrints:"Total impressions",successRate:"Taux de succès",totalPrintTime:"Temps total d'impression",printTime:"Temps d'impression",totalFilament:"Total filament utilisé",filamentUsed:"Filament utilisé",filamentCost:"Coût filament",totalCost:"Coût total",energyUsed:"Énergie consommée",energyCost:"Coût énergie",energyWarmingUpTooltip:"Le suivi énergétique collecte encore des instantanés horaires. Les totaux par période deviendront précis dès qu’un instantané existera avant la plage sélectionnée. Les premières valeurs peuvent être sous-estimées.",averagePrintTime:"Temps moyen par impression",printsPerDay:"Impressions par jour",byPrinter:"Par imprimante",printsByPrinter:"Impressions par imprimante",byMaterial:"Par matériau",byMonth:"Par mois",last7Days:"7 derniers jours",last30Days:"30 derniers jours",last90Days:"90 derniers jours",allTime:"Tout le temps",quickStats:"Stats rapides",printActivity:"Activité d'impression",filamentTypes:"Types de filament",filamentTrends:"Tendances filament",failureAnalysis:"Analyse des échecs",timeAccuracy:"Précision du temps",successful:"Succès :",failed:"Échecs :",cancelled:"Annulés :",perfectEstimate:"100% = estimation parfaite",noTimeAccuracyData:"Pas encore de données de précision",noFilamentData:"Aucune donnée de filament",noPrinterData:"Aucune donnée d'imprimante",noPrintData:"Aucune donnée d'impression",noPrintDataLast30Days:"Aucune impression ces 30 derniers jours",failureReasons:"Raisons des échecs",topFailureReasons:"Top raisons d'échec",failedPrintsCount:"{{failed}} / {{total}} impressions ont échoué",lastWeekRate:"Semaine dernière : {{rate}}%",resetLayout:"Réinitialiser la mise en page",recalculateCosts:"Recalculer les coûts",recalculateCostsHint:"Recalcule les coûts avec les prix actuels des filaments",exportStats:"Exporter les stats",exportAsCsv:"Exporter en CSV",exportAsExcel:"Exporter en Excel",hiddenCount:"{{count}} Masqués",exportDownloaded:"Export téléchargé",exportFailed:"Échec export",layoutReset:"Mise en page réinitialisée",recalculatedCosts:"Coûts recalculés pour {{count}} archives",recalculateFailed:"Échec du calcul",loadingStats:"Chargement des statistiques...",noPermissionResetLayout:"Pas d'autorisation de réinitialisation",noPermissionRecalculate:"Pas d'autorisation de recalcul",noPrintDataInRange:"Aucune donnée dans la période sélectionnée",periodFilament:"Filament utilisé",periodCost:"Coût",avgPerPrint:"Moy. par impression",usageOverTime:"Utilisation dans le temps",filamentByWeight:"Poids",printDuration:"Durée d'impression",printerUtilization:"Utilisation imprimante",filamentSuccess:"Succès par matériau",printHabits:"Habitudes d'impression",printTimeOfDay:"Heure d'impression",colorDistribution:"Distribution des couleurs",noColorData:"Aucune donnée de couleur disponible",records:"Enregistrements",longestPrint:"Plus longue impression",heaviestPrint:"Plus lourde impression",mostExpensivePrint:"Plus chère",busiestDay:"Jour le plus actif",successStreak:"Série de succès",streakPrint:"impression consécutive",streakPrints:"{{count}} impressions consécutives",printerStats:"Stats imprimante",hours:"heures",avgPrints:"Moy. impressions",noArchiveData:"Aucune donnée d'impression disponible",filamentByTime:"Temps",avgWeight:"Moy. poids",avgTime:"Moy. temps",filamentByPrints:"Impressions",timeframe:{today:"Aujourd'hui","this-week":"Cette semaine","this-month":"Ce mois","last-7":"7 derniers jours","last-30":"30 derniers jours","last-90":"90 derniers jours","this-year":"Cette année","all-time":"Tout",custom:"Personnalisé",from:"Du",to:"Au"},allUsers:"Tous les utilisateurs",noUser:"Aucun utilisateur (Système)",filterByUser:"Filtrer par utilisateur"},maintenance:{title:"Maintenance",overview:"Vue d'ensemble",allOk:"Toute la maintenance est à jour",dueCount:"{{count}} tâche à faire",dueCount_plural:"{{count}} tâches à faire",warningCount:"{{count}} avertissement",warningCount_plural:"{{count}} avertissements",totalPrintTime:"Temps d'impression total",nextMaintenance:"Prochaine maintenance",nothingDue:"Rien de prévu",tasks:"Tâches",lastPerformed:"Dernière réalisation",interval:"Intervalle",hoursRemaining:"{{hours}}h restantes",hoursOverdue:"{{hours}}h de retard",markDone:"Marquer comme fait",performMaintenance:"Effectuer la maintenance",history:"Historique",noHistory:"Aucun historique",editPrintHours:"Modifier les heures d'impression",currentHours:"Heures actuelles",statusTab:"Statut",settingsTab:"Paramètres",overdueCount:"{{count}} en retard",dueSoonCount:"{{count}} bientôt",dueSoon:"Bientôt",allGood:"Tout va bien",overdueBy:"Retard de {{duration}}",dueIn:"Dans {{duration}}",timeLeft:"{{duration}} restant",day:"1 jour",days:"{{count}} jours",week:"1 semaine",weeks:"{{count}} semaines",month:"1 mois",months:"{{count}} mois",year:"1 an",maintenanceTypes:"Types de maintenance",maintenanceTypesDescription:"Types système et tâches personnalisées",addCustomType:"Ajouter un type",restoreDefaults:"Restaurer les tâches par défaut",intervalType:"Type d'intervalle",intervalValue:"Intervalle ({{type}})",icon:"Icône",documentationLink:"Lien documentation (optionnel)",assignToPrinters:"Assigner aux imprimantes",selectAtLeastOnePrinter:"Sélectionnez au moins une imprimante",addType:"Ajouter le type",custom:"Personnalisé",printHours:"Heures d'impression",calendarDays:"Jours calendaires",exampleName:"ex: Remplacement filtre HEPA",viewDocumentation:"Voir documentation",timeBasedInterval:"Intervalle temporel",intervalOverrides:"Exceptions d'intervalle",intervalOverridesDescription:"Intervalles spécifiques par imprimante",assignedToPrinters:"Assigné aux imprimantes :",noPrintersAssigned:"Aucune imprimante assignée",addPrinterShort:"Ajouter :",printersAssignedClick:"{{count}} imprimante(s) assignée(s) - gérer",removeFromPrinter:"Retirer de cette imprimante",types:{lubricateCarbonRods:"Lubrifier les tiges carbone",lubricateRails:"Lubrifier les rails linéaires",cleanNozzle:"Nettoyer la buse / hotend",checkBelts:"Vérifier la tension des courroies",cleanBuildPlate:"Nettoyer le plateau",checkExtruder:"Vérifier les engrenages de l'extrudeur",checkCooling:"Vérifier les ventilateurs",generalInspection:"Inspection générale",cleanCarbonRods:"Nettoyer les tiges carbone",lubricateSteelRods:"Lubrifier les tiges en acier",cleanSteelRods:"Nettoyer les tiges en acier",cleanLinearRails:"Nettoyer les rails linéaires",checkPtfeTube:"Vérifier le tube PTFE",replaceHepaFilter:"Remplacer le filtre HEPA",replaceCarbonFilter:"Remplacer le filtre charbon",lubricateLeftNozzleRail:"Lubrifier le rail de buse gauche"},maintenanceComplete:"Maintenance marquée comme faite",typeUpdated:"Type mis à jour",typeDeleted:"Type supprimé",defaultsRestored:"{{count}} tâche(s) par défaut restaurée(s)",printHoursUpdated:"Heures mises à jour",printerAssigned:"Imprimante assignée",printerRemoved:"Imprimante retirée",deleteTypeConfirm:'Supprimer "{{name}}" ?',deleteSystemTypeTitle:"Supprimer la tâche de maintenance par défaut ?",deleteSystemTypeMessage:'Êtes-vous sûr de vouloir supprimer la tâche de maintenance par défaut "{{name}}" ?',noPermissionUpdate:"Pas d'autorisation de mise à jour",noPermissionPerform:"Pas d'autorisation d'action",noPermissionEditTypes:"Pas d'autorisation de modification types",noPermissionDeleteTypes:"Pas d'autorisation de suppression types",noPermissionEditHours:"Pas d'autorisation de modification heures",noPermissionRemovePrinter:"Pas d'autorisation retrait imprimante",noPermissionAssignPrinter:"Pas d'autorisation assignation",noPermissionEditIntervals:"Pas d'autorisation modification intervalles",configureSettings:"Configurer types et intervalles"},settings:{title:"Paramètres",general:"Général",tabs:{general:"Général",smartPlugs:"Prises connectées",notifications:"Notifications",queue:"Flux de travail",filament:"Filament",network:"Réseau",apiKeys:"Clés API",virtualPrinter:"Imprimante virtuelle",failureDetection:"Détection d'échec",users:"Authentification",backup:"Sauvegarde",emailAuth:"Authentification Email",ldap:"LDAP",twoFa:"Authentification 2FA",oidc:"SSO / OIDC",security:"Sécurité",spoolbuddy:"SpoolBuddy"},ldap:{title:"Authentification LDAP",enabledDesc:"L'authentification LDAP est activée",disabledDesc:"L'authentification LDAP est désactivée",disabledHint:"Configurez et enregistrez les paramètres LDAP ci-dessous, puis activez.",enabled:"Authentification LDAP activée",disabled:"Authentification LDAP désactivée",feature1:"Les utilisateurs peuvent se connecter avec leurs identifiants LDAP",feature2:"Le compte administrateur local reste disponible en secours",feature3:"Les groupes LDAP sont associés aux groupes BamBuddy à la connexion",serverConfig:"Configuration du serveur LDAP",serverUrl:"URL du serveur",serverUrlHint:"Utilisez ldap:// pour standard ou ldaps:// pour les connexions SSL",security:"Sécurité",securityHint:"StartTLS met à niveau une connexion simple vers TLS. LDAPS utilise TLS dès le début.",bindDn:"DN de liaison (compte de service)",bindPassword:"Mot de passe de liaison",searchBase:"DN de base de recherche",userFilter:"Filtre de recherche utilisateur",userFilterHint:"{username} est remplacé par le nom d'utilisateur. Utilisez (uid={username}) pour OpenLDAP.",advanced:"Avancé",autoProvision:"Provisionnement automatique",autoProvisionHint:"Créer automatiquement un compte BamBuddy lors de la première connexion LDAP",defaultGroup:"Groupe par défaut",defaultGroupNone:"— Aucun (pas de repli) —",defaultGroupHint:"Groupe de repli attribué lorsqu'un utilisateur LDAP s'authentifie mais n'est dans aucun groupe LDAP mappé. Laissez vide pour laisser les utilisateurs non mappés sans autorisations.",groupMapping:"Mappage de groupes (JSON)",groupMappingHint:"Associer les DN de groupes LDAP aux groupes BamBuddy. Groupes disponibles : ",testConnection:"Tester la connexion",settingsSaved:"Paramètres LDAP enregistrés",errors:{serverRequired:"L'URL du serveur LDAP est requise",searchBaseRequired:"Le DN de base de recherche est requis",enableAuthFirst:"Activez d'abord l'authentification",configureLdapFirst:"Enregistrez d'abord les paramètres LDAP"}},email:{smtpSettings:"Configuration SMTP",smtpHost:"Serveur SMTP",smtpPort:"Port SMTP",security:"Sécurité",authentication:"Authentification",username:"Utilisateur",password:"Mot de passe",fromEmail:"Email expéditeur",fromName:"Nom expéditeur",testConnection:"Tester la connexion SMTP",testRecipient:"Email test destinataire",sendTest:"Envoyer email test",sending:"Envoi...",save:"Enregistrer les paramètres",saving:"Enregistrement...",advancedAuth:"Authentification avancée",advancedAuthEnabled:"L'authentification avancée est activée",advancedAuthEnabledDesc:"La gestion des utilisateurs par email est active. Les nouveaux utilisateurs recevront un mot de passe auto-généré.",advancedAuthDisabled:"Authentification avancée désactivée",advancedAuthDisabledDesc:"Activez pour les fonctionnalités liées à l'email (mot de passe oublié, etc).",enable:"Activer",disable:"Désactiver",feature1:"Génération auto et envoi de mots de passe par email",feature2:"Connexion par utilisateur ou email",feature3:"Réinitialisation mot de passe oublié disponible",feature4:"Réinitialisation admin par email",errors:{requiredFields:"Remplissez tous les champs requis",usernameRequired:"L'utilisateur est requis pour l'authentification",enterTestEmail:"Entrez une adresse email de test",smtpServerAndEmail:"Serveur et expéditeur requis pour le test",usernamePasswordRequired:"Utilisateur et mot de passe requis pour l'auth",configureSmtpFirst:"Configurez et testez le SMTP d'abord",enableAuthFirst:"Veuillez d'abord activer l'authentification pour utiliser les fonctionnalités basées sur le courrier électronique."},success:{settingsSaved:"Paramètres SMTP enregistrés"},securityOptions:{starttls:"STARTTLS (Port 587)",ssl:"SSL/TLS (Port 465)",none:"Aucun (Port 25)"},authOptions:{enabled:"Activée",disabled:"Désactivée"}},appearance:"Apparence",notifications:"Notifications",smartPlugs:"Prises connectées",spoolman:"Spoolman",updates:"Mises à jour",language:"Langue",languageDescription:"Choisissez votre langue",theme:"Thème",themeLight:"Clair",themeDark:"Sombre",themeSystem:"Système",defaultView:"Vue par défaut",defaultViewDescription:"Page affichée au démarrage",checkForUpdates:"Vérifier les mises à jour",autoUpdate:"Mise à jour auto",currentVersion:"Version actuelle",latestVersion:"Dernière version",upToDate:"Bambuddy est à jour",updateAvailable:"Mise à jour disponible",notificationLanguage:"Langue des notifications",notificationLanguageDescription:"Langue pour les notifications push",bedCooledThreshold:"Seuil de refroidissement du plateau",bedCooledThresholdDescription:"Température en dessous de laquelle le plateau est considéré comme refroidi",userNotificationsEnabled:"Notifications utilisateur",userNotificationsEnabledDescription:"Active le menu de notifications utilisateur et les notifications par e-mail pour les événements d'impression. Nécessite l'authentification avancée.",userNotificationsDisabledHint:"Activez l'authentification avancée pour utiliser les notifications utilisateur.",notificationProviders:"Fournisseurs de notifications",addProvider:"Ajouter un fournisseur",editProvider:"Modifier le fournisseur",providerType:"Type de fournisseur",testNotification:"Tester la notification",testSuccess:"Notification de test envoyée",testFailed:"Échec de l'envoi du test",quietHours:"Heures de silence",quietHoursDescription:"Ne pas déranger pendant ces heures",quietHoursStart:"Début",quietHoursEnd:"Fin",events:{title:"Événements de notification",printStart:"Impression démarrée",printComplete:"Impression terminée",printFailed:"Impression échouée",printStopped:"Impression arrêtée",printProgress:"Jalons de progression",printProgressDescription:"Notifier à 25%, 50%, 75%",printerOffline:"Imprimante hors ligne",printerError:"Erreur imprimante",filamentLow:"Filament bas",maintenanceDue:"Maintenance due",maintenanceDueDescription:"Notifier quand une tâche est due"},smartPlug:{title:"Prises connectées",add:"Ajouter une prise",edit:"Modifier la prise",name:"Nom",ipAddress:"Adresse IP",linkedPrinter:"Imprimante liée",autoOn:"Allumage auto",autoOnDescription:"Allumer au début de l'impression",autoOff:"Extinction auto",autoOffDescription:"Éteindre après l'impression",offDelay:"Délai d'extinction",offDelayMinutes:"Minutes après fin",offDelayTemp:"Quand la buse est sous",currentState:"État actuel",turnOn:"Allumer",turnOff:"Éteindre"},filamentTracking:"Suivi de Filament",filamentTrackingDesc:"Choisissez comment suivre vos bobines. Utilisez l'inventaire intégré ou connectez un serveur Spoolman.",filamentChecks:"Vérifications du filament",disableFilamentWarnings:"Désactiver les avertissements de filament",disableFilamentWarningsDesc:"Ne pas afficher les avertissements de filament insuffisant lors de l'impression ou de la mise en file d'attente",preferLowestFilament:"Préférer le filament le plus bas",preferLowestFilamentDesc:"Lorsque plusieurs bobines correspondent, utiliser celle avec le moins de filament restant",trackingModeBuiltIn:"Inventaire Intégré",trackingModeBuiltInDesc:"Correspondance RFID et suivi de consommation inclus",trackingModeSpoolmanDesc:"Serveur de gestion externe",builtInFeatureRfid:"Détecte auto les bobines RFID Bambu Lab dans l'AMS",builtInFeatureUsage:"Suit la consommation par impression",builtInFeatureCatalog:"Gère bobines, couleurs et profils facteur K",builtInFeatureThirdParty:"Les bobines tierces peuvent être assignées aux bobines d'inventaire",amsSyncButton:"Synchroniser les poids depuis l'AMS",amsSyncTitle:"Synchroniser les poids des bobines depuis l'AMS",amsSyncMessage:"Tous les poids des bobines de l'inventaire seront écrasés par les valeurs actuelles de l'AMS des imprimantes connectées. Utilisez ceci pour récupérer des données de poids corrompues. Les imprimantes doivent être en ligne.",amsSyncing:"Synchronisation...",amsSyncSuccess:"{{synced}} bobine(s) synchronisée(s), {{skipped}} ignorée(s)",amsSyncError:"Échec de la synchronisation des poids depuis l'AMS",spoolmanAmsSyncButton:"Synchroniser les poids Spoolman depuis l'AMS",spoolmanAmsSyncTitle:"Synchroniser les poids des bobines Spoolman depuis l'AMS",spoolmanAmsSyncMessage:"Cela mettra à jour les poids des bobines Spoolman en fonction des valeurs de remplissage AMS actuelles des imprimantes connectées. Les imprimantes doivent être en ligne.",spoolmanAmsSyncing:"Synchronisation...",spoolmanAmsSyncSuccess:"{{synced}} bobine(s) synchronisée(s), {{skipped}} ignorée(s)",spoolmanAmsSyncError:"Échec de la synchronisation des poids Spoolman depuis l'AMS",spoolmanAmsSyncErrorUnreachable:"Échec de la synchronisation (Spoolman inaccessible)",spoolmanAmsSyncErrorNotConfigured:"Échec de la synchronisation (Spoolman non configuré)",spoolmanNotConfigured:"Spoolman non configuré",spoolmanFilamentCatalogTitle:"Catalogue de filaments Spoolman",spoolmanFilamentCatalogDesc:"Noms de filaments et poids à vide depuis votre instance Spoolman. Le nom et le poids bobine sont modifiables ici ; toutes les autres propriétés sont gérées directement dans Spoolman.",spoolmanUrl:"URL Spoolman",spoolmanUrlHint:"URL de votre serveur Spoolman (ex: http://localhost:7912)",spoolmanConnected:"Connecté",spoolmanDisconnected:"Déconnecté",status:"Statut",connect:"Connecter",disconnect:"Déconnecter",howSyncWorks:"Fonctionnement de la Sync",syncInfoRfidOnly:"Seules les bobines officielles RFID sont synchronisées",syncInfoAutoCreate:"Les bobines sont créées dans Spoolman à la 1ère sync",syncInfoThirdPartySkipped:"Les bobines tierces ou rechargées sont ignorées",linkingExistingSpools:"Lier des bobines existantes",linkingExistingSpoolsDesc:'Pour lier une bobine Spoolman, survolez un slot AMS et cliquez sur "Lier à Spoolman".',syncMode:"Mode de Sync",syncModeAuto:"Automatique",syncModeManual:"Manuel uniquement",syncModeAutoDesc:"Sync auto lors de changements AMS",syncModeManualDesc:"Sync uniquement sur déclenchement manuel",syncAmsData:"Synchroniser AMS",syncAmsDataDesc:"Synchroniser manuellement les données vers Spoolman",allPrinters:"Toutes les imprimantes",noDefaultPrinter:"Aucune par défaut (demander à chaque fois)",sidebarOrder:"Ordre de la barre latérale",saveThumbnails:"Enregistrer les vignettes",captureFinishPhoto:"Prendre une photo à la fin",noPrintersConfigured:"Aucune imprimante configurée",archiveMode:{always:"Toujours créer une archive",never:"Ne jamais créer d'archive",ask:"Demander à chaque fois"},checkForUpdatesLabel:"Vérifier les mises à jour",checkPrinterFirmware:"Vérifier le firmware imprimante",includeBetaUpdates:"Inclure les versions bêta",includeBetaUpdatesDesc:"Notifier des versions bêta et préliminaires lors de la vérification des mises à jour",enableRetry:"Activer la rétentative",homeAssistantDescription:"Contrôler les prises via Home Assistant",environmentManagedLabel:"(Géré par l'environnement)",autoEnabledViaEnv:"Activé via variables d'environnement",urlFromEnvReadOnly:"Valeur HA_URL (lecture seule)",tokenFromEnvReadOnly:"Valeur HA_TOKEN (lecture seule)",mqttConnectedTo:"Connecté à",prometheusDescription:"Exposer les données au format Prometheus",noSmartPlugsTitle:"Aucune prise configurée",noSmartPlugsDescription:"Ajoutez une prise Tasmota pour suivre l'énergie et automatiser.",noProvidersTitle:"Aucun fournisseur configuré",noProvidersDescription:"Ajoutez un fournisseur pour recevoir des alertes.",noTemplatesAvailable:"Aucun modèle dispo. Redémarrez pour les générer.",apiPermissionView:"Voir statut et file",apiPermissionEdit:"Gérer la file d'attente",apiKeysEmptyTitle:"Aucune clé API",apiKeysEmptyDescription:"Créez une clé pour vos intégrations.",noUsersFound:"Aucun utilisateur trouvé",noGroupsFound:"Aucun groupe trouvé",noGroupsAvailable:"Aucun groupe disponible",passwordsDoNotMatch:"Les mots de passe ne correspondent pas",systemGroupWarning:"Les noms des groupes système sont fixes",authDisabledTitle:"Authentification désactivée",authDisabledFeature1:"Requis pour accéder au système",authDisabledFeature2:"Gestion multi-utilisateurs et groupes",authDisabledFeature3:"Plus de 50 permissions granulaires",userHasCreated:"Cet utilisateur a créé :",userItemsQuestion:"Que faire de ces éléments ?",deleteUserConfirm:"Supprimer cet utilisateur ?",actionCannotBeUndone:"Cette action est irréversible.",addFirstSmartPlug:"Ajoutez votre première prise",providers:"Fournisseurs",log:"Journal",testAll:"Tout tester",testResults:"Résultats du test",testPassedCount:"{{count}} succès",testFailedCount:"{{count}} échecs",messageTemplates:"Modèles de message",messageTemplatesDescription:"Personnalisez les messages par événement.",apiKeys:"Clés API",apiKeysDescription:"Créez des clés pour webhooks et API.",createKey:"Créer une clé",apiKeyCreated:"Clé API créée avec succès",apiKeyCopyWarning:"Copiez cette clé maintenant - elle ne sera plus affichée !",useInApiBrowser:"Utiliser dans l'explorateur API",createNewApiKey:"Nouvelle clé API",keyName:"Nom de la clé",keyNamePlaceholder:"ex: Home Assistant, OctoPrint",readStatus:"Lire le statut",readStatusDescription:"Voir les imprimantes et la file",manageQueue:"Gérer la file",manageQueueDescription:"Ajouter/retirer des éléments",controlPrinter:"Contrôler l'imprimante",controlPrinterDescription:"Pause, reprise, arrêt",manageLibrary:"Gérer la bibliothèque",manageLibraryDescription:"Téléverser, renommer et supprimer des fichiers de la bibliothèque ; importer des modèles depuis MakerWorld",manageInventory:"Gérer l'inventaire",manageInventoryDescription:"Créer, modifier et supprimer des bobines et des entrées d'inventaire. Requis pour les bornes SpoolBuddy (scan NFC, lectures de balance, commandes système de la borne).",libraryBadge:"Bibliothèque",inventoryBadge:"Inventaire",cloudAccess:"Autoriser l'accès cloud",cloudAccessDescription:"Lit les préréglages et filaments Bambu Cloud en votre nom. Nécessite d'être connecté à Bambu Cloud.",cloudBadge:"Cloud",updateEnergyCost:"Mettre à jour le tarif électrique",updateEnergyCostDescription:"Autoriser cette clé à POSTer un nouveau tarif électrique par kWh sur /settings/electricity-price. Utile pour les automatisations Home Assistant à tarif dynamique (Tibber, Octopus, etc.). Il s'agit du seul champ de paramètres modifiable via clé API.",energyCostBadge:"Énergie",legacyKey:"Hérité",legacyKeyTooltip:"Créé avant la propriété par utilisateur ; recréez pour l'accès cloud",unnamedKey:"Clé sans nom",lastUsed:"Dernière utilisation",read:"Lecture",control:"Contrôle",createFirstKey:"Créez votre première clé",webhookEndpoints:"Points de terminaison Webhook",webhookApiKeyHint:"Utilisez la clé dans l'en-tête X-API-Key.",webhook:{getAllStatus:"Tous les statuts",getSpecificStatus:"Statut spécifique",addToQueue:"Ajouter à la file",pausePrint:"Pause",resumePrint:"Reprise",stopPrint:"Arrêt"},apiBrowser:"Explorateur API",apiBrowserDescription:"Testez les endpoints API.",apiKeyForTesting:"Clé API pour test",apiKeyPlaceholder:"Collez votre clé pour tester...",apiKeyHint:"Sera envoyée via l'en-tête X-API-Key.",deleteApiKeyTitle:"Supprimer la clé API",deleteApiKeyMessage:"Les intégrations utilisant cette clé cesseront de fonctionner.",deleteKey:"Supprimer la clé",amsDisplayThresholds:"Seuils d'affichage AMS",amsThresholdsDescription:"Seuils de couleur pour humidité et température.",humidity:"Humidité",goodGreen:"Bon (vert)",fairOrange:"Moyen (orange)",aboveFairBad:"Au-dessus = rouge (mauvais)",fairAlsoDryingThreshold:"Ce seuil est aussi utilisé pour déclencher le séchage automatique",temperature:"Température",goodBlue:"Bon (bleu)",aboveFairHot:"Au-dessus = rouge (chaud)",historyRetention:"Rétention d'historique",keepSensorHistory:"Garder l'historique pendant",historyRetentionDescription:"Les anciennes données seront supprimées.",defaultPrintOptions:"Options d'impression par défaut",defaultPrintOptionsDescription:"Définir les valeurs par défaut des options d'impression. Modifiables dans la boîte de dialogue d'impression.",defaultBedLevelling:"Nivellement du lit",defaultBedLevellingDesc:"Niveler automatiquement le lit avant l'impression",defaultFlowCali:"Calibration du flux",defaultFlowCaliDesc:"Calibrer le flux d'extrusion",defaultVibrationCali:"Calibration des vibrations",defaultVibrationCaliDesc:"Réduire les artefacts de ringing",defaultLayerInspect:"Inspection première couche",defaultLayerInspectDesc:"Inspection IA de la première couche",defaultTimelapse:"Time-lapse",defaultTimelapseDesc:"Enregistrer une vidéo timelapse",staggeredStart:"Démarrage échelonné",staggeredStartDescription:"Taille de groupe et intervalle par défaut lors de l'échelonnement des démarrages de lots multi-imprimantes. Modifiable par lot dans la fenêtre d'impression.",plateClear:"Confirmation de plateau libre",requirePlateClear:"Exiger la confirmation de plateau libre",requirePlateClearDescription:"Lorsque cette option est activée, le planificateur attend une confirmation de plateau libre par imprimante avant de lancer les impressions en file d'attente sur les imprimantes ayant terminé. La désactiver masque également le badge d'état du plateau et le bouton « Marquer le plateau comme dégagé » sur les cartes d'imprimante.",gcodeInjection:"Injection de G-code",gcodeInjectionDescription:"Configurez du G-code personnalisé à injecter au début et/ou à la fin des impressions pour les systèmes d'auto-impression comme Farmloop, SwapMod, AutoClear et Printflow 3D. Les snippets sont configurés par modèle d'imprimante et appliqués lorsque « Injecter le G-code » est activé sur un élément de file d'attente.",gcodeInjectionNoPrinters:"Aucune imprimante trouvée. Ajoutez des imprimantes pour configurer les snippets G-code.",gcodeStartLabel:"G-code de début",gcodeEndLabel:"G-code de fin",gcodeStartPlaceholder:"G-code ajouté avant le début de l'impression...",gcodeEndPlaceholder:"G-code ajouté après la fin de l'impression...",staggerGroupSize:"Taille du groupe",staggerGroupSizeHelp:"Imprimantes à démarrer simultanément par groupe",staggerInterval:"Intervalle (minutes)",staggerIntervalHelp:"Délai entre chaque démarrage de groupe",queueDrying:"Séchage automatique",queueDryingDescription:"Sécher automatiquement le filament AMS lorsque l'imprimante est inactive entre les impressions. Utilise le seuil d'humidité ci-dessus.",queueDryingEnabled:"Activer le séchage automatique",queueDryingEnabledDescription:"Démarrer le séchage AMS automatiquement lorsque l'imprimante est inactive et l'humidité dépasse le seuil",queueDryingBlock:"Attendre la fin du séchage",queueDryingBlockDescription:"Bloquer la file d'attente jusqu'à la fin du séchage. Désactivé, les impressions sont prioritaires.",ambientDryingEnabled:"Séchage ambiant",ambientDryingEnabledDescription:"Sécher automatiquement le filament sur les imprimantes inactives lorsque l'humidité dépasse le seuil, même sans impressions en file.",dryingPresets:"Préréglages de séchage",dryingPresetsDescription:"Température et durée par type de filament. AMS 2 Pro utilise des températures plus basses, AMS-HT supporte des températures plus élevées.",dryingFilament:"Filament",printModal:"Fenêtre d'impression",expandCustomMapping:"Étendre le mapping personnalisé par défaut",expandCustomMappingDescription:"Affiche le mapping AMS par imprimante étendu.",authentication:"Authentification",authEnabledDescription:"L'instance est sécurisée",authDisabledDescription:"Activez pour restreindre l'accès",authDisabledMessage:"Activez l'authentification pour gérer comptes et permissions.",enableAuthentication:"Activer l'authentification",currentUser:"Utilisateur actuel",changePassword:"Changer le mot de passe",admin:"Administrateur",users:"Utilisateurs",addUser:"Ajouter un utilisateur",groups:"Groupes",addGroup:"Ajouter un groupe",system:"Système",noDescription:"Pas de description",userCount:"{{count}} utilisateurs",permissionCount:"{{count}} permissions",createUser:"Créer un utilisateur",username:"Nom d'utilisateur",enterUsername:"Entrez l'utilisateur",password:"Mot de passe",enterPassword:"Entrez le mot de passe",passwordRequirements:"Au moins 8 caractères, avec une majuscule, une minuscule, un chiffre et un caractère spécial.",confirmPassword:"Confirmer le mot de passe",confirmPasswordPlaceholder:"Confirmez le mot de passe",viewReleaseOnGitHub:"Voir la version sur GitHub",turnAllPlugsOn:"Tout allumer",turnAllPlugsOff:"Tout éteindre",clearNotificationLogs:"Effacer les journaux",clearLogsMessage:"Efface définitivement les logs de plus de 30 jours.",clearLogs:"Effacer les logs",resetUiPreferences:"Réinitialiser l'UI",resetUiPreferencesMessage:"Réinitialise l'ordre, thème, widgets, etc. N'affecte pas vos données.",resetPreferences:"Réinitialiser",deleteGroupTitle:"Supprimer le groupe",deleteGroupMessage:"Les utilisateurs de ce groupe perdront ces permissions.",deleteGroup:"Supprimer le groupe",disableAuthenticationTitle:"Désactiver l'authentification",disableAuthenticationMessage:"Instance accessible sans connexion. Les comptes sont conservés.",disableAuthentication:"Désactiver",configureBambuddy:"Configurer Bambuddy",systemDefault:"Défaut système",archiveSettings:"Réglages Archives",newWindow:"Nouvelle fenêtre",embeddedOverlay:"Superposition intégrée",preferredSlicer:"Slicer préféré",preferredSlicerDescription:"Application pour ouvrir les fichiers",orcaslicerKnownIssuesWarning:"OrcaSlicer 2.3.2 / 2.4.0-dev ont des bugs CLI connus qui bloquent le découpage de nombreux 3MF créés par Bambu — voir les issues amont #12426 (segfault sur fichiers multi-extrudeurs peints) et #13386 (rejet de validation stricte des plages de paramètres). Bambu Studio est recommandé jusqu'à ce que les correctifs amont arrivent.",useSlicerApi:"Utiliser l'API Slicer",useSlicerApiDescription:'Lorsque activé, les actions "Slice" ouvrent le slicer intégré et appellent le sidecar slicer-API. Lorsque désactivé (par défaut), elles redirigent vers le slicer desktop via le schéma URI.',slicerCard:"Slicer",orcaslicerApiUrl:"OrcaSlicer sidecar URL",bambuStudioApiUrl:"Bambu Studio sidecar URL",slicerApiUrlDescription:"URL du conteneur sidecar slicer-API. Laisser vide pour utiliser les variables d'environnement SLICER_API_URL / BAMBU_STUDIO_API_URL.",slicerBundles:{title:"Bundles de slicer",description:'Importez un Printer Preset Bundle (.bbscfg) exporté depuis BambuStudio (Fichier → Exporter → Exporter le bundle de préréglages → "Printer preset bundle"). Une fois importé, les requêtes de découpage peuvent sélectionner les préréglages du bundle par nom sans re-téléverser le triplet de profils JSON.',uploadButton:"Téléverser le bundle",uploading:"Téléversement…",loading:"Chargement des bundles…",empty:"Aucun bundle importé pour le moment.",summary:"{{processCount}} processus · {{filamentCount}} préréglages de filament",delete:"Supprimer",uploadSuccess:"{{name}} importé",uploadError:"Échec du téléversement du bundle : {{message}}",deleteSuccess:"Bundle supprimé",deleteError:"Échec de la suppression du bundle : {{message}}",confirmDeleteTitle:"Supprimer ce bundle ?",confirmDeleteMessage:`Les requêtes de découpage référençant "{{name}}" échoueront jusqu'à la réimportation du bundle.`},externalCameras:"Caméras externes",costTracking:"Suivi des coûts",printsOnly:"Impressions uniquement",totalConsumption:"Consommation totale",dataManagement:"Gestion des données",storageUsage:"Utilisation du stockage",storageUsageDescription:"Répartition de l'utilisation des données par catégorie",storageUsageTotal:"Total",storageUsageErrors:"Erreurs",storageUsageOtherBreakdown:"Autre (inclut ressources statiques, scripts et fichiers de configuration)",storageUsageSystem:"Système",storageUsageData:"Données",storageUsageUnavailable:"Informations d'utilisation du stockage non disponibles",clearNotificationLogsDescription:"Supprimer logs de plus de 30 jours",resetUiPreferencesDescription:"Réinitialise thèmes et affichage sans toucher aux données.",enableHomeAssistant:"Activer Home Assistant",enableMqtt:"Activer MQTT",useTls:"Utiliser TLS",enableMetricsEndpoint:"Activer l'endpoint Metrics",availableMetrics:"Metrics disponibles",editUser:"Modifier l'utilisateur",deleteUserTitle:"Supprimer l'utilisateur",groupName:"Nom du groupe",leaveEmptyForAnonymous:"Vide pour anonyme",leaveEmptyForNoAuth:"Vide si pas d'auth",enterNewPassword:"Nouveau mot de passe",confirmNewPassword:"Confirmer nouveau mdp",enterGroupName:"Entrez le nom du groupe",enterDescriptionOptional:"Description (optionnel)",enterCurrentPassword:"Mdp actuel",enterNewPasswordMin6:"Nouveau mdp (min 6 char)",toast:{keyCopied:"Clé copiée",copyFailed:"Échec copie",keyAddedToBrowser:"Clé ajoutée à l'explorateur",clearLogsFailed:"Échec effacement logs",uiPreferencesReset:"Préférences UI réinitialisées. Rafraîchissement...",authDisabled:"Authentification désactivée",authDisableFailed:"Échec désactivation",apiKeyCreated:"Clé API créée",apiKeyDeleted:"Clé API supprimée",userCreated:"Utilisateur créé",userUpdated:"Utilisateur mis à jour",userDeleted:"Utilisateur supprimé",groupCreated:"Groupe créé",groupUpdated:"Groupe mis à jour",groupDeleted:"Groupe supprimé",fillRequiredFields:"Remplissez les champs requis",passwordsDoNotMatch:"Les mots de passe ne correspondent pas",passwordTooShort:"Le mot de passe doit contenir au moins 8 caractères",passwordNeedsUppercase:"Le mot de passe doit contenir au moins une majuscule",passwordNeedsLowercase:"Le mot de passe doit contenir au moins une minuscule",passwordNeedsDigit:"Le mot de passe doit contenir au moins un chiffre",passwordNeedsSpecial:"Le mot de passe doit contenir au moins un caractère spécial",enterGroupName:"Entrez un nom de groupe",settingsSaved:"Paramètres enregistrés",noPermissionUpdate:"Vous n'avez pas l'autorisation de modifier les paramètres",cameraSettingsSaved:"Réglages caméra enregistrés",enterCameraUrl:"Entrez une URL caméra",passwordChanged:"Mot de passe modifié",connectionFailed:"Échec connexion",testFailed:"Échec test",cameraConnected:"Caméra connectée {{resolution}}"},testConnection:"Tester la connexion",catalog:{spoolCatalog:"Catalogue de Bobines",spoolCatalogDescription:"Poids des bobines vides par marque/type. Utilisé pour le calcul auto du poids restant.",searchCatalog:"Chercher dans le catalogue...",addNewEntry:"Nouvelle Entrée",namePlaceholder:"Nom (ex: Bambu Lab - Plastique)",weight:"Poids",type:"Type",default:"Défaut",custom:"Perso",noMatch:"Aucune entrée correspondante",empty:"Catalogue vide",deleteEntry:"Supprimer l'entrée",deleteConfirm:'Supprimer "{{name}}" ?',resetCatalog:"Réinitialiser le catalogue",resetConfirm:"Réinitialiser aux valeurs par défaut ? Vos entrées personnalisées seront supprimées.",loadFailed:"Échec chargement catalogue",nameWeightRequired:"Nom et poids requis",entryAdded:"Entrée ajoutée",addFailed:"Échec ajout",entryUpdated:"Entrée mise à jour",updateFailed:"Échec mise à jour",entryDeleted:"Entrée supprimée",deleteFailed:"Échec suppression",resetSuccess:"Catalogue réinitialisé",resetFailed:"Échec réinitialisation",exported:"{{count}} entrées exportées",imported:"{{added}} entrées importées ({{skipped}} ignorées)",importFailed:"Échec import : format JSON invalide",exportTooltip:"Exporter en JSON",importTooltip:"Importer depuis JSON",resetTooltip:"Réinitialiser par défaut",selectedCount:"{{count}} sélectionnés",deleteSelected:"Supprimer la sélection",bulkDeleteConfirm:"Supprimer {{count}} entrées ?",bulkDeleted:"{{count}} entrées supprimées",bulkDeleteFailed:"Échec de la suppression",material:"Matériau",spoolWeight:"Poids bobine",color:"Couleur",updateSpoolWeight:"Mettre à jour le poids bobine",filamentUpdated:"Filament mis à jour",filamentUpdateFailed:"Échec de la mise à jour du filament",filamentUpdateInvalid:"Données de filament invalides",keepExistingSpoolWeight:"Conserver l'ancien poids pour les bobines existantes",keepExistingSpoolWeightDesc:"Les bobines déjà créées avec ce type de filament conservent l'ancien poids à vide. Les nouvelles bobines utilisent la valeur mise à jour.",applyToAllSpools:"Appliquer à toutes les bobines",applyToAllSpoolsDesc:"Tous les calculs de poids pour ce type de filament utilisent immédiatement le nouveau poids à vide."},colorCatalog:{title:"Catalogue de Couleurs",description:"Couleurs de filament par fabricant. Utilisé pour la recherche auto lors de l'ajout de bobines.",searchColors:"Chercher couleurs...",allManufacturers:"Tous les fabricants",addNewColor:"Nouvelle Couleur",manufacturer:"Fabricant",colorName:"Nom couleur",hex:"Hex",materialOptional:"Matériau (optionnel)",showing:"Affichage {{filtered}} sur {{total}} couleurs",noMatch:"Aucune couleur correspondante",empty:"Catalogue vide",deleteColor:"Supprimer couleur",deleteConfirm:'Supprimer "{{name}}" ?',resetCatalog:"Réinitialiser catalogue couleurs",resetConfirm:"Réinitialiser aux valeurs par défaut ?",sync:"Synchro.",starting:"Démarrage...",syncTooltip:"Sync depuis FilamentColors.xyz (2000+ couleurs, peut être long)",loadFailed:"Échec chargement catalogue couleurs",fieldsRequired:"Fabricant, nom et code Hex requis",colorAdded:"Couleur ajoutée",addFailed:"Échec ajout",colorUpdated:"Couleur mise à jour",updateFailed:"Échec mise à jour",colorDeleted:"Couleur supprimée",deleteFailed:"Échec suppression",resetSuccess:"Catalogue réinitialisé",resetFailed:"Échec réinitialisation",syncUpToDate:"Déjà à jour ({{count}} couleurs vérifiées)",syncComplete:"{{added}} couleurs ajoutées ({{skipped}} déjà présentes)",syncError:"Erreur de sync",syncFailed:"Échec sync FilamentColors.xyz",exported:"{{count}} couleurs exportées",imported:"{{added}} couleurs importées ({{skipped}} ignorées)",importFailed:"Échec import : format JSON invalide",selectedCount:"{{count}} sélectionnés",deleteSelected:"Supprimer la sélection",bulkDeleteConfirm:"Supprimer {{count}} couleurs ?",bulkDeleted:"{{count}} couleurs supprimées",bulkDeleteFailed:"Échec de la suppression des couleurs"},dateFormat:"Format de date",dateFormatUs:"US (MM/JJ/AAAA)",dateFormatEu:"EU (JJ/MM/AAAA)",dateFormatIso:"ISO (AAAA-MM-JJ)",timeFormat:"Format horaire",timeFormat12:"12 heures (3:30 PM)",timeFormat24:"24 heures (15:30)",defaultPrinter:"Imprimante par défaut",defaultPrinterDescription:"Présélectionner cette imprimante pour les téléversements, réimpressions et autres opérations.",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"Glissez les éléments dans la barre latérale pour réorganiser. Réinitialiser l'ordre par défaut ici.",setDefault:"Définir par défaut",sidebarOrderSetDefaultHint:"Définir par défaut applique l'ordre actuel du menu aux utilisateurs qui n'ont pas encore personnalisé le leur.",sidebarDefaultSet:"L'ordre du menu par défaut a été défini.",sidebarDefaultCleared:"Ordre du menu par défaut effacé.",sidebarDefaultFailed:"Échec de la définition de l'ordre du menu par défaut.",reset:"Réinitialiser",darkMode:"Mode sombre",lightMode:"Mode clair",active:"(actif)",background:"Arrière-plan",accent:"Accent",style:"Style",bgNeutral:"Neutre",bgWarm:"Chaud",bgCool:"Froid",bgOled:"OLED Noir",bgSlate:"Bleu ardoise",bgForest:"Vert forêt",accentGreen:"Vert",accentTeal:"Sarcelle",accentBlue:"Bleu",accentOrange:"Orange",accentPurple:"Violet",accentRed:"Rouge",styleClassic:"Classique",styleGlow:"Lumineux",styleVibrant:"Vif",themeToggleHint:"Basculer entre le mode sombre, clair et système avec l'icône dans la barre latérale.",autoArchivePrints:"Archiver automatiquement les impressions",autoArchiveDescription:"Sauvegarder automatiquement les fichiers 3MF à la fin des impressions",saveThumbnailsDescription:"Extraire et sauvegarder les images d'aperçu des fichiers 3MF",captureFinishPhotoDescription:"Prendre une photo avec la caméra de l'imprimante à la fin de l'impression. Bambuddy enregistre un court timelapse pendant l'impression afin que la photo puisse provenir du moment précédant l'abaissement du plateau ; le fichier du timelapse est conservé si vous avez activé le timelapse pour cette impression, sinon il est supprimé automatiquement après la capture de la photo.",ffmpegNotInstalled:"ffmpeg non installé",ffmpegRequired:"La capture caméra nécessite ffmpeg. Installez-le via <brew>brew install ffmpeg</brew> (macOS) ou <apt>apt install ffmpeg</apt> (Linux).",camera:"Caméra",cameraViewMode:"Mode d'affichage caméra",cameraOverlayDescription:"La caméra s'ouvre dans un overlay redimensionnable sur l'écran principal",cameraWindowDescription:"La caméra s'ouvre dans une fenêtre de navigateur séparée",externalCamerasDescription:"Configurer des caméras externes pour remplacer la caméra intégrée. Supporte les flux MJPEG, RTSP, snapshots HTTP et caméras USB (V4L2). Lorsqu'activée, la caméra externe est utilisée pour la vue en direct et les photos de fin.",cameraPlaceholderUsb:"Chemin du périphérique (/dev/video0)",cameraPlaceholderUrl:"URL caméra (rtsp://... ou http://...)",cameraTypeMjpeg:"Flux MJPEG",cameraTypeRtsp:"Flux RTSP",cameraTypeSnapshot:"Snapshot HTTP",cameraTypeUsb:"Caméra USB (V4L2)",cameraSnapshotUrl:"URL de capture (facultatif)",cameraSnapshotUrlPlaceholder:"http://192.168.1.61:1984/api/frame.jpeg?src=printer",cameraSnapshotUrlHelp:"URL d'image unique utilisée pour les miniatures de notification, photos de fin, frames de timelapse par couche et détection de plaque. Le timelapse et la détection de plaque nécessitent chacun leur propre bascule par imprimante — cette URL est juste la source d'image qu'ils utilisent lorsqu'activés. Laisser vide pour capturer depuis le flux en direct ci-dessus. Utile pour go2rtc (/api/frame.jpeg) et caméras IP avec un point de terminaison de capture dédié.",cameraRotation:"Rotation",test:"Tester",connected:"Connecté",disconnected:"Déconnecté",currency:"Devise",defaultFilamentCost:"Coût filament par défaut (par kg)",electricityCost:"Coût électricité par kWh",energyDisplayMode:"Mode d'affichage énergie",energyModePrintDescription:"Le tableau de bord affiche la somme de l'énergie utilisée pendant les impressions",energyModeTotalDescription:"Le tableau de bord affiche l'énergie totale des prises connectées",fileManager:"Gestionnaire de fichiers",createArchiveEntry:"Créer une entrée d'archive lors de l'impression",createArchiveEntryDescription:"Lors de l'impression depuis le gestionnaire de fichiers, créer optionnellement une entrée d'archive",lowDiskSpaceWarning:"Avertissement espace disque faible",lowDiskSpaceDescription:"Afficher un avertissement lorsque l'espace disque libre descend sous ce seuil",printerFirmware:"Firmware imprimante",checkFirmwareDescription:"Vérifier les mises à jour firmware de Bambu Lab",bambuddySoftware:"Logiciel Bambuddy",autoCheckDescription:"Vérifier automatiquement les nouvelles versions au démarrage",checkNow:"Vérifier maintenant",updateAvailableVersion:"Mise à jour disponible : v{{version}}",releaseNotes:"Notes de version",updateViaDocker:"Mettre à jour via Docker Compose :",updateViaHomeAssistant:"Les mises à jour sont gérées par le superviseur Home Assistant. Ouvrez Paramètres → Modules complémentaires → Bambuddy dans Home Assistant pour installer la nouvelle version.",installUpdate:"Installer la mise à jour",latestVersionRunning:"Vous utilisez la dernière version",failedToCheckUpdates:"Échec de la vérification des mises à jour : {{error}}",backupRestore:"Sauvegarde & Restauration",backupRestoreDescription:"Exporter/importer les paramètres et configurer la sauvegarde GitHub",goToBackup:"Aller à la sauvegarde",externalUrl:"URL externe",externalUrlDescription:"L'URL externe où Bambuddy est accessible. Utilisée pour les images de notification et les intégrations externes.",bambuddyUrl:"URL Bambuddy",externalUrlHint:"Inclure le protocole et le port (ex : http://192.168.1.100:8000)",ftpRetry:"Réessai FTP",ftpRetryDescription:"Réessayer les opérations FTP lorsque le WiFi de l'imprimante est instable. S'applique aux téléchargements 3MF, uploads d'impression, téléchargements timelapse et mises à jour firmware.",autoRetryDescription:"Réessayer automatiquement les opérations FTP échouées",retryAttempts:"Tentatives de réessai",retryDelay:"Délai de réessai",connectionTimeout:"Délai de connexion",time_one:"{{count}} fois",time_other:"{{count}} fois",second_one:"{{count}} seconde",second_other:"{{count}} secondes",nSeconds:"{{count}} secondes",increaseForWeakWifi:"Augmenter pour les imprimantes avec un WiFi faible",homeAssistant:"Home Assistant",homeAssistantFullDescription:"Se connecter à Home Assistant pour contrôler les prises connectées via l'API REST HA. Supporte les entités switch, light, input_boolean et script.",homeAssistantUrl:"URL Home Assistant",longLivedAccessToken:"Token d'accès longue durée",haTokenHint:"Créer un token dans HA : Profil → Tokens d'accès longue durée → Créer un token",connectionSuccessful:"Connexion réussie",connectionFailed:"Connexion échouée",haConnectionSuccess:"Connexion à Home Assistant réussie.",haConnectionFailed:"Échec de la connexion à Home Assistant.",mqttPublishing:"Publication MQTT",mqttDescription:"Publier les événements BamBuddy vers un broker MQTT externe pour l'intégration avec Node-RED, Home Assistant et d'autres systèmes d'automatisation.",mqttEnableDescription:"Publier les événements vers un broker MQTT externe",brokerHostname:"Nom d'hôte du broker",port:"Port",usernameOptional:"Nom d'utilisateur (optionnel)",passwordOptional:"Mot de passe (optionnel)",topicPrefix:"Préfixe de topic",topicPrefixHint:"Les topics seront : {{prefix}}/printers/<serial>/status, etc.",prometheusMetrics:"Métriques Prometheus",prometheusEndpointDescription:"Exposer les métriques imprimante sur <code>/api/v1/metrics</code> pour la surveillance Prometheus/Grafana.",bearerTokenOptional:"Token Bearer (optionnel)",bearerTokenHint:"Si défini, les requêtes doivent inclure <code>Authorization: Bearer <token></code>",metricsConnectionStatus:"État de connexion",metricsPrinterState:"État imprimante (idle/printing/etc)",metricsPrintProgress:"Progression impression 0-100%",metricsBedTemp:"Température du plateau",metricsNozzleTemp:"Température de la buse",metricsPrintsTotal:"Total impressions par résultat",metricsMore:"...et plus (couches, ventilateurs, file d'attente, utilisation filament)",smartPlugsDescription:"Connecter des prises connectées (Tasmota ou Home Assistant) pour automatiser le contrôle de l'alimentation et suivre la consommation d'énergie de vos imprimantes.",allOn:"Tout allumer",allOff:"Tout éteindre",addSmartPlug:"Ajouter une prise",energySummary:"Résumé énergétique",currentPower:"Puissance actuelle",plugsOnline:"{{reachable}}/{{total}} prises en ligne",today:"Aujourd'hui",yesterday:"Hier",total:"Total",enablePlugsForSummary:"Activer les prises pour voir le résumé énergétique",addNotificationProvider:"Ajouter",systemBadge:"(Système)",creating:"Création...",changing:"Modification...",deleteUserAndItems:"Supprimer l'utilisateur ET ses éléments",deleteUserKeepItems:"Supprimer l'utilisateur, garder les éléments (deviennent sans propriétaire)",ok:"OK",twoFa:{totpTitle:"Application Authenticator (TOTP)",totpDesc:"Utilisez une application comme Google Authenticator, Aegis ou Authy.",emailOtpTitle:"OTP par e-mail",emailOtpDesc:"Envoyez un code à usage unique à {{email}} lors de la connexion.",emailOtpNoEmail:"Ajoutez une adresse e-mail à votre compte pour activer cette méthode.",addEmailFirst:"Votre compte n'a pas d'adresse e-mail. Demandez à un administrateur d'en ajouter une.",setupTotp:"Configurer l'application Authenticator",setupAuthApp:"Configurer l'application Authenticator",setupInstructions:"Scannez le QR code avec votre application authenticator, puis confirmez avec un code.",manualEntry:"Impossible de scanner ? Entrez ce secret manuellement :",scannedContinue:"Code scanné — continuer",enterCodeToConfirm:"Entrez le code à 6 chiffres de votre application authenticator pour confirmer.",activate:"Activer",disableTotp:"Désactiver l'Authenticator",disableConfirmHint:"Entrez un code TOTP valide ou un code de secours pour désactiver l'authenticator.",totpDisabled:"Application Authenticator désactivée.",emailOtpEnabled:"OTP par e-mail activé.",emailOtpDisabled:"OTP par e-mail désactivé.",smtpRequired:"Veuillez d'abord configurer et tester les paramètres SMTP.",invalidCode:"Code invalide. Veuillez réessayer.",enableEmailOtp:"Activer OTP par e-mail",disableEmailOtp:"Désactiver OTP par e-mail",emailSetupEnterCode:"Un code de vérification a été envoyé à votre adresse e-mail. Entrez-le ci-dessous pour confirmer que vous possédez cette boîte de réception.",verifyAndEnable:"Vérifier et activer",emailDisablePasswordHint:"Entrez le mot de passe de votre compte pour confirmer la désactivation de l'OTP par e-mail.",passwordPlaceholder:"Entrez votre mot de passe",backupCodesTitle:"Sauvegardez vos codes de secours",backupCodesWarning:"Conservez ces codes en lieu sûr. Chaque code ne peut être utilisé qu'une seule fois et ne sera plus affiché.",backupCodesRemaining:"{{count}} codes de secours restants",savedCodes:"Codes sauvegardés",regenBackup:"Régénérer les codes de secours",regenBackupHint:"Entrez votre code TOTP actuel pour générer 10 nouveaux codes de secours. Tous les codes existants seront invalidés.",newBackupCodes:"Nouveaux codes de secours",linkedAccounts:"Comptes SSO liés",linkedAccountsDesc:"Ces fournisseurs d'identité externes sont liés à votre compte.",oidcUnlinked:"Compte dissocié."},oidc:{title:"Fournisseurs SSO / OIDC",desc:"Configurez des fournisseurs OpenID Connect pour l'authentification unique.",addProvider:"Ajouter un fournisseur",newProvider:"Nouveau fournisseur",empty:"Aucun fournisseur OIDC configuré.",created:"Fournisseur créé.",updated:"Fournisseur mis à jour.",deleted:"Fournisseur supprimé.",refreshIcon:"Actualiser l'icône",removeIcon:"Supprimer l'icône",iconRefreshed:"Icône actualisée.",iconRemoved:"Icône supprimée.",iconFetchFailed:"Impossible de récupérer l'icône depuis l'URL du fournisseur.",deleteTitle:"Supprimer le fournisseur",deleteMessage:'Supprimer "{{name}}" ? Tous les comptes liés seront déconnectés.',form:{name:"Nom d'affichage",issuerUrl:"URL de l'émetteur",clientId:"ID client",clientSecret:"Secret client",scopes:"Portées",iconUrl:"URL de l'icône (optionnel)",enabled:"Activé",autoCreate:"Créer les utilisateurs automatiquement",autoCreateDesc:"Crée automatiquement un compte local lors de la première connexion.",autoLink:"Lier automatiquement les comptes existants",autoLinkDesc:"Lie les comptes locaux existants par e-mail lors de la première connexion.",secretHint:"laisser vide pour conserver",secretPlaceholder:"nouveau secret",emailClaim:"Claim e-mail",emailClaimDesc:"Claim JWT utilisé comme identité e-mail. Utiliser 'preferred_username' ou 'upn' pour Azure Entra ID (qui n'envoie pas email_verified). Utiliser uniquement des noms de claims de confiance.",emailClaimPlaceholder:"e-mail",emailClaimCustomClaimAutoLinkWarning:"Les revendications personnalisées sont sûres pour la liaison auto uniquement lorsque la valeur est administrée par le tenant (par ex. Azure Entra ID upn / preferred_username). N'activez pas la liaison auto si votre IdP permet aux utilisateurs de s'auto-attribuer cette revendication.",requireEmailVerified:"Exiger la vérification e-mail",requireEmailVerifiedDesc:"N'accepter le claim e-mail que si le fournisseur le marque comme vérifié.",requireEmailVerifiedWarning:"Avertissement : l'e-mail sera accepté sans vérification. À utiliser uniquement avec des fournisseurs de confiance.",requireEmailVerifiedAutoLink:"Désactiver le lien automatique d'abord pour modifier ce paramètre.",defaultGroup:"Groupe par défaut",defaultGroupDesc:"Groupe attribué aux utilisateurs créés automatiquement. Repli sur Viewers si non défini.",defaultGroupViewersFallback:"Viewers (par défaut)"}},encryption:{title:"Statut du chiffrement MFA",enabledFromEnv:"Chiffrement au repos activé (clé depuis la variable d'environnement MFA_ENCRYPTION_KEY)",enabledFromFile:"Chiffrement au repos activé (clé chargée depuis le répertoire de données)",enabledGenerated:"Chiffrement au repos activé avec une clé auto-générée",notConfigured:"Chiffrement au repos non configuré",notConfiguredDesc:"Les secrets TOTP et client_secrets OIDC sont stockés en clair. Définissez MFA_ENCRYPTION_KEY ou redémarrez Bambuddy avec un répertoire de données accessible en écriture pour en générer un automatiquement.",allEncrypted:"Tous les secrets MFA sont chiffrés au repos.",legacyRowsLabel:"Lignes héritées en clair",encryptedRowsLabel:"Lignes chiffrées",legacyRowsWarning:"{{count}} ligne(s) héritée(s) en clair détectée(s). Réenregistrez le fournisseur OIDC ou réinscrivez l'application d'authentification de l'utilisateur pour migrer vers le stockage chiffré.",backupHint:"La clé auto-générée est stockée dans DATA_DIR/.mfa_encryption_key et incluse dans les ZIP de sauvegarde locale. Conservez vos sauvegardes en sécurité ou définissez MFA_ENCRYPTION_KEY explicitement.",decryptionBrokenTitle:"Clé de chiffrement manquante",decryptionBrokenError:"{{count}} enregistrement(s) chiffré(s) ne peuvent pas être déchiffrés car la clé de chiffrement n'est plus disponible. Restaurez le MFA_ENCRYPTION_KEY précédent ou DATA_DIR/.mfa_encryption_key pour récupérer.",migrationErrorWarning:"{{count}} ligne(s) ancienne(s) n'ont pas pu être rechiffrée(s) au démarrage. Vérifiez les journaux du serveur et redémarrez Bambuddy pour réessayer."},spoolbuddy:{infoTitle:"Périphériques SpoolBuddy",infoBody:"Les bornes SpoolBuddy s'enregistrent automatiquement via heartbeat. Désinscrivez ici un appareil qui n'est plus utilisé ou un doublon obsolète laissé par un crash du daemon.",duplicatesTitle:"{{count}} appareils enregistrés",duplicatesBody:"Seul le premier appareil enregistré est utilisé par l'interface du kiosk. Si l'un de ces appareils est un doublon obsolète issu d'un crash, désinscrivez-le — un appareil en ligne se ré-enregistrera automatiquement au prochain heartbeat.",empty:"Aucun appareil SpoolBuddy enregistré pour le moment.",online:"En ligne",offline:"Hors ligne",unregister:"Désinscrire",unregisterSuccess:"Appareil désinscrit",unregisterError:"Échec de la désinscription",confirmTitle:"Désinscrire l'appareil SpoolBuddy ?",confirmBody:`Cela retirera "{{hostname}}" ({{deviceId}}) de la base de données. Si l'appareil est en ligne, il se ré-enregistrera automatiquement au prochain heartbeat.`,ipAddress:"Adresse IP",firmware:"Micrologiciel",lastSeen:"Dernière activité",daemonUptime:"Uptime du daemon",systemUptime:"Uptime système",never:"jamais",nfc:"NFC",scale:"Balance",cpuTemp:"Temp. CPU",cpuLoad:"Charge CPU",memory:"Mémoire",disk:"Disque",update:"Mettre à jour",updateConfirmTitle:"Mettre à jour le daemon Spoolbuddy ?",updateConfirmBody:'Déclencher une mise à jour logicielle sur "{{hostname}}" ? Le daemon redémarrera une fois la mise à jour appliquée.',restartBrowser:"Redémarrer le navigateur",restartBrowserConfirmTitle:"Redémarrer le navigateur du kiosk ?",restartBrowserConfirmBody:`Redémarrer le navigateur du kiosk sur "{{hostname}}" ? L'écran sera momentanément vide.`,restartDaemon:"Redémarrer le daemon",restartDaemonConfirmTitle:"Redémarrer le daemon Spoolbuddy ?",restartDaemonConfirmBody:`Redémarrer le daemon Spoolbuddy sur "{{hostname}}" ? L'appareil sera hors ligne quelques secondes.`,reboot:"Redémarrer",rebootConfirmTitle:"Redémarrer l'appareil ?",rebootConfirmBody:`Redémarrer "{{hostname}}" ? L'appareil sera hors ligne pendant environ une minute.`,shutdown:"Éteindre",shutdownConfirmTitle:"Éteindre l'appareil ?",shutdownConfirmBody:`Éteindre "{{hostname}}" ? Vous aurez besoin d'un accès physique pour le rallumer.`,commandConfirm:"Confirmer",commandQueued:"Commande en file d'attente",commandError:"Échec de l'envoi de la commande"}},notification:{printStarted:{title:"Impression démarrée",body:"{{printer}} : {{filename}} commence l'impression"},printCompleted:{title:"Impression terminée",body:"{{printer}} : {{filename}} a réussi"},printFailed:{title:"Impression échouée",body:"{{printer}} : {{filename}} a échoué"},printStopped:{title:"Impression arrêtée",body:"{{printer}} : {{filename}} a été arrêtée"},printProgress:{title:"Progression d'impression",body:"{{printer}} : {{filename}} est à {{percent}}%"},printerOffline:{title:"Imprimante hors ligne",body:"{{printer}} est déconnectée"},printerError:{title:"Erreur imprimante",body:"{{printer}} : {{error}}"},filamentLow:{title:"Filament bas",body:"{{printer}} : Le filament est presque vide"},maintenanceDue:{title:"Maintenance due",body:"{{printer}} : {{items}} demandent votre attention"}},errors:{generic:"Une erreur est survenue",networkError:"Erreur réseau. Vérifiez votre connexion.",notFound:"Non trouvé",unauthorized:"Non autorisé",serverError:"Erreur serveur",validationError:"Vérifiez vos saisies",printerConnectionFailed:"Échec connexion imprimante",saveFailed:"Échec enregistrement",deleteFailed:"Échec suppression",loadFailed:"Échec chargement"},hmsErrors:{title:"Erreurs - {{name}}",noErrors:"Aucune erreur",viewOnWiki:"Voir sur le Wiki Bambu Lab",clearInstructions:"Effacez les erreurs sur l'imprimante pour les retirer ici.",clearErrors:"Effacer les erreurs",clearSuccess:"Erreurs HMS effacées",clearFailed:"Échec de l'effacement des erreurs HMS"},mqttDebug:{title:"Journal de débogage MQTT",searchPlaceholder:"Chercher topic ou message...",noMessages:"Aucun message enregistré",startLoggingHint:'Cliquez sur "Démarrer" pour capturer les messages MQTT',noMessagesMatch:"Aucun message ne correspond",adjustFilterHint:"Ajustez votre recherche",incoming:"Entrant",outgoing:"Sortant",loggingStopped:"Enregistrement arrêté",loggingActive:"Enregistrement actif - rafraîchissement auto",startLogging:"Démarrer",stopLogging:"Arrêter",clearLog:"Effacer le journal",topic:"Sujet",timestamp:"Horodatage",direction:"Direction",all:"Tous"},printerFiles:{title:"Gestionnaire de fichiers",storageUsed:"Utilisé :",storageFree:"Libre :",filterPlaceholder:"Filtrer les fichiers...",deleteButton:"Supprimer",deleteFiles:"Supprimer {{count}} fichiers",deleteFileConfirm:'Supprimer "{{name}}" ?',deleteFilesConfirm:"Supprimer les {{count}} fichiers sélectionnés ?",noFiles:"Aucun fichier sur l'imprimante",loadingFiles:"Chargement...",failedToLoad:"Échec chargement fichiers",toast:{filesDeleted:"{{count}} fichier(s) supprimé(s)",deleteFailed:"Échec suppression : {{error}}"}},confirm:{delete:"Voulez-vous vraiment supprimer cet élément ?",unsavedChanges:"Changements non sauvegardés. Voulez-vous quitter ?",clearQueue:"Voulez-vous vraiment vider la file d'attente ?"},login:{title:"Connexion Bambuddy",subtitle:"Connectez-vous à votre compte",username:"Utilisateur",usernamePlaceholder:"Entrez votre utilisateur",usernameOrEmail:"Utilisateur ou Email",usernameOrEmailPlaceholder:"Utilisateur ou @ Email",password:"Mot de passe",passwordPlaceholder:"Entrez votre mot de passe",signIn:"Se connecter",signingIn:"Connexion...",rememberMe:"Se souvenir de moi",forgotPassword:"Mot de passe oublié ?",loginSuccess:"Connecté avec succès",loginFailed:"Échec de connexion",enterCredentials:"Entrez vos identifiants",enterEmail:"Veuillez entrer votre adresse e-mail",oidcLoginFailed:"Échec de la connexion OIDC",oidcErrors:{providerError:"Le fournisseur d'identité a renvoyé une erreur",missingParameters:"Il manque des paramètres requis dans le callback OIDC",invalidState:"L'état OIDC est invalide ou a déjà été utilisé",stateExpired:"La session OIDC a expiré — veuillez réessayer",providerNotFound:"Fournisseur OIDC introuvable",discoveryFailed:"Impossible de récupérer le document de découverte OIDC",invalidDiscovery:"Le document de découverte OIDC est invalide",networkError:"Erreur réseau lors de l'échange de jeton OIDC",badResponse:"Réponse inattendue lors de l'échange de jeton OIDC",noIdToken:"Le fournisseur OIDC n'a pas renvoyé de jeton d'identité",validationFailed:"La validation du jeton OIDC a échoué",nonceMismatch:"Le nonce OIDC ne correspond pas — possible attaque par rejeu",missingSubClaim:"Le jeton OIDC est dépourvu de la revendication sub",noLinkedAccount:"Aucun compte local est lié à cette identité OIDC",accountInactive:"Votre compte est inactif",userResolutionFailed:"Impossible de résoudre votre compte",internalError:"Une erreur interne est survenue lors de la connexion OIDC",tokenExchangeFailed:"L'échange de jeton OIDC a échoué"},forgotPasswordTitle:"Mot de passe oublié",forgotPasswordMessage:"Contactez votre administrateur pour réinitialiser votre accès.",forgotPasswordEmailMessage:"Entrez votre email pour recevoir un nouveau mot de passe.",emailAddress:"Adresse Email",emailPlaceholder:"votre.email@exemple.com",cancel:"Annuler",sending:"Envoi...",sendResetEmail:"Envoyer l'email",howToReset:"Comment réinitialiser :",resetStep1:"Contactez votre admin Bambuddy",resetStep2:"Demandez une réinitialisation dans la Gestion Utilisateurs",resetStep3:"Il vous donnera un mot de passe temporaire",resetStep4:"Connectez-vous et changez-le dans les Paramètres",gotIt:"Compris",twoFA:{title:"Authentification à deux facteurs",subtitle:"Votre compte est protégé par la 2FA. Saisissez le code de vérification ci-dessous.",methodAuthenticator:"Application d'authentification",methodEmail:"Code par e-mail",methodBackup:"Code de récupération",instructionsTotp:"Ouvrez votre application d'authentification et saisissez le code à 6 chiffres pour Bambuddy.",instructionsEmail:"Un code à 6 chiffres a été envoyé à votre adresse e-mail. Il est valable 10 minutes.",instructionsEmailNotSent:"Cliquez ci-dessous pour recevoir un code de vérification par e-mail.",instructionsBackup:"Saisissez l'un de vos codes de récupération à 8 caractères. Chaque code ne peut être utilisé qu'une seule fois.",sendCodeButton:"Envoyer le code par e-mail",sendingCode:"Envoi en cours...",resendCode:"Renvoyer le code",codeLabel:"Code de vérification",backupCodeLabel:"Code de récupération",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"Vérifier",verifyingButton:"Vérification en cours...",backToLogin:"← Retour à la connexion",orContinueWith:"ou continuer avec",signInWith:"Se connecter avec {{provider}}",enterCode:"Veuillez entrer le code de vérification",sendCodeFailed:"Échec de l'envoi du code de vérification",invalidCode:"Code invalide. Veuillez réessayer."},resetPassword:{title:"Définir un nouveau mot de passe",subtitle:"Saisissez et confirmez votre nouveau mot de passe ci-dessous.",newPassword:"Nouveau mot de passe",newPasswordPlaceholder:"Au moins 8 caractères",confirmPassword:"Confirmer le mot de passe",confirmPasswordPlaceholder:"Répéter le nouveau mot de passe",saving:"Enregistrement…",submit:"Définir le mot de passe",backToLogin:"Retour à la connexion",passwordsDoNotMatch:"Les mots de passe ne correspondent pas",passwordTooShort:"Le mot de passe doit contenir au moins 8 caractères",resetFailed:"Échec de la réinitialisation. Le lien a peut-être expiré."}},setup:{title:"Configuration Bambuddy",subtitle:"Configurez l'authentification",enableAuth:"Activer l'authentification",adminAccount:"Compte Admin",adminAccountDesc:"Si des admins existent, ils seront utilisés. Sinon, créez-en un ci-dessous.",adminUsername:"Utilisateur Admin",adminPassword:"Mot de passe Admin",optionalIfAdminExists:"(optionnel si admin existe)",adminUsernamePlaceholder:"Nom admin (optionnel)",adminPasswordPlaceholder:"Mdp admin (optionnel)",confirmPassword:"Confirmer mdp",confirmPasswordPlaceholder:"Confirmez mdp admin",settingUp:"Configuration...",completeSetup:"Terminer la configuration",toast:{authEnabledAdminCreated:"Authentification activée et admin créé",authEnabledExistingAdmins:"Authentification activée avec admins existants",setupCompleted:"Configuration terminée",enterBothCredentials:"Entrez les deux ou laissez vide pour utiliser les admins existants",passwordsDoNotMatch:"Les mots de passe ne correspondent pas",passwordTooShort:"Minimum 6 caractères"}},changePassword:{title:"Changer le mot de passe",currentPassword:"Mot de passe actuel",currentPasswordPlaceholder:"Entrez mdp actuel",newPassword:"Nouveau mot de passe",newPasswordPlaceholder:"Nouveau mdp (min 6 char)",confirmPassword:"Confirmer nouveau mdp",confirmPasswordPlaceholder:"Confirmez nouveau mdp",passwordsDoNotMatch:"Les mots de passe ne correspondent pas",passwordTooShort:"Minimum 6 caractères",changing:"Changement...",success:"Mot de passe modifié",failed:"Échec modification"},plateAlert:{title:"Impression en Pause !",message:"Objets détectés sur le plateau. L'impression a été suspendue automatiquement. Videz le plateau avant de reprendre.",understand:"J'ai compris"},camera:{title:"Vue Caméra",invalidPrinterId:"ID imprimante invalide",live:"Direct",snapshot:"Instantané",restartStream:"Redémarrer le flux",refreshSnapshot:"Rafraîchir l'image",fullscreen:"Plein écran",exitFullscreen:"Quitter plein écran",connectingToCamera:"Connexion caméra...",capturingSnapshot:"Capture...",connectionLost:"Connexion perdue",connectionFailed:"Échec connexion caméra",reconnecting:"Reconnexion dans {{countdown}}s... (essai {{attempt}}/{{max}})",reconnectNow:"Reconnexion immédiate",cameraUnavailable:"Caméra indisponible",cameraUnavailableDesc:"Vérifiez que l'imprimante est allumée.",noCamera:"Aucune caméra disponible",retry:"Réessayer",cameraStream:"Flux caméra",zoomOut:"Zoom arrière",zoomIn:"Zoom avant",resetZoom:"Réinitialiser zoom",recording:"Enregistrement",startRecording:"Démarrer l'enregistrement",stopRecording:"Arrêter l'enregistrement",chamberLight:"Basculer lumière chambre",unavailable:"Caméra indisponible",diagnose:{button:"Diagnostic",modalTitle:"Diagnostic de la caméra",running:"Diagnostic en cours...",runFailed:"Impossible d'exécuter le diagnostic : {{error}}",retry:"Relancer",stage:{tcp_reachable:"Accessibilité réseau",first_frame:"Capture d'image",live_stream_active:"Flux en direct actif"},summary:{all_ok:"La caméra fonctionne. Toutes les étapes du diagnostic ont réussi.",live_stream_active_healthy:"La caméra diffuse actuellement avec des images récentes — aucun test nécessaire.",printer_unreachable:"L'imprimante n'est pas joignable. Vérifiez l'adresse IP, la connexion réseau et que l'imprimante est allumée.",camera_port_closed:"L'imprimante répond mais le port de la caméra est fermé. Assurez-vous que le mode LAN et le mode développeur sont activés dans les paramètres de l'imprimante.",no_frame:"Connexion à la caméra établie mais aucune image reçue. Réessayez ou vérifiez que la caméra est activée dans les paramètres de l'imprimante.",unknown_failure:"Le diagnostic de la caméra a échoué pour une raison inconnue. Consultez le journal de support pour plus de détails."},meta:{protocol:"Protocole",port:"Port",profile:"Profil"}}},groups:{title:"Gestion des Groupes",subtitle:"Gérez les permissions pour le contrôle d'accès",backToSettings:"Retour aux paramètres",createGroup:"Créer un groupe",noPermission:"Accès refusé.",system:"Système",noDescription:"Pas de description",usersCount:"{{count}} utilisateurs",permissionsCount:"{{count}} permissions",edit:"Modifier",delete:"Supprimer",toast:{created:"Groupe créé",updated:"Groupe mis à jour",deleted:"Groupe supprimé",enterGroupName:"Entrez un nom de groupe"},modal:{editGroup:"Modifier le groupe",createGroup:"Créer un groupe",cancel:"Annuler",saving:"Enregistrement...",creating:"Création...",saveChanges:"Enregistrer"},form:{groupName:"Nom du groupe",groupNamePlaceholder:"Nom du groupe",systemGroupWarning:"Les groupes système sont fixes",description:"Description",descriptionPlaceholder:"Description (optionnel)",permissions:"Permissions ({{count}} sélectionnées)"},deleteModal:{title:"Supprimer le groupe",message:"Les utilisateurs de ce groupe perdront ces permissions.",confirm:"Supprimer"},editor:{title:"Modifier le groupe",createTitle:"Créer un groupe",search:"Rechercher des permissions...",selectAll:"Tout sélectionner",clearAll:"Tout désélectionner",permissionsSelected:"{{count}} sélectionnée(s)",noResults:"Aucune permission ne correspond à votre recherche"}},users:{title:"Gestion des Utilisateurs",subtitle:"Gérez les accès à Bambuddy",backToSettings:"Retour aux paramètres",createUser:"Créer un utilisateur",noPermission:"Accès refusé.",admin:"Administrateur",noGroups:"Aucun groupe",active:"Actif",inactive:"Inactif",edit:"Modifier",delete:"Supprimer",system:"Système",noGroupsAvailable:"Aucun groupe disponible",table:{username:"Utilisateur",groups:"Groupes",status:"Statut",actions:"Actions"},toast:{created:"Utilisateur créé",updated:"Utilisateur mis à jour",deleted:"Utilisateur supprimé",fillRequired:"Remplissez les champs requis",passwordsDoNotMatch:"Les mots de passe ne correspondent pas",passwordTooShort:"Minimum 6 caractères",ldapProvisioned:'Utilisateur LDAP "{{username}}" provisionné'},modal:{createUser:"Créer utilisateur",editUser:"Modifier utilisateur",cancel:"Annuler",creating:"Création...",saving:"Enregistrement...",saveChanges:"Enregistrer",advancedAuthSubtitle:"avec Authentification Avancée",tabsAriaLabel:"Source utilisateur",localTab:"Local",ldapTab:"LDAP",ldapSearchLabel:"Rechercher dans l'annuaire",ldapSearchPlaceholder:"Tapez un nom d'utilisateur, un nom ou un e-mail...",ldapMinChars:"Tapez au moins 2 caractères pour rechercher",ldapTypeToSearch:"Commencez à taper pour rechercher dans l'annuaire LDAP",ldapSearching:"Recherche dans l'annuaire...",ldapNoResults:"Aucun utilisateur correspondant dans l'annuaire",ldapSearchError:"Échec de la recherche dans l'annuaire. Vérifiez l'état du serveur LDAP.",ldapAlreadyProvisioned:"Déjà provisionné",ldapSelectedLabel:"Sélectionné",ldapProvision:"Provisionner l'utilisateur",ldapProvisioning:"Provisionnement...",ldapErrorProvision:"Échec du provisionnement. Vérifiez l'état du serveur LDAP et réessayez."},form:{username:"Utilisateur",usernamePlaceholder:"Nom utilisateur",email:"E-mail",emailPlaceholder:"utilisateur@exemple.com",password:"Mot de passe",passwordPlaceholder:"Mot de passe",confirmPassword:"Confirmer mdp",confirmPasswordPlaceholder:"Confirmez mdp",newPasswordPlaceholder:"Nouveau mdp",confirmNewPasswordPlaceholder:"Confirmez nouveau mdp",leaveBlankToKeep:"Laissez vide pour conserver l'actuel",groups:"Groupes",optional:"optionnel",autoGeneratedPassword:"Un mot de passe sera généré et envoyé par email.",passwordManagedByAdvancedAuth:'Géré par Auth Avancée. Utilisez "Réinitialiser" pour envoyer un nouveau mdp par email.',resetPassword:"Réinitialiser le mot de passe",resettingPassword:"Réinitialisation..."},deleteModal:{title:"Supprimer utilisateur",message:"Cette action est irréversible.",confirm:"Supprimer"}},streamOverlay:{title:"Superposition Flux",invalidPrinterId:"ID invalide",cameraStream:"Flux caméra",progress:"Progression",eta:"Fin estimée",printerIdle:"Imprimante inactive",printerOffline:"Imprimante hors ligne",status:{printing:"Impression",paused:"En pause",finished:"Terminée",failed:"Échouée",idle:"Inactive",unknown:"Inconnue"}},profiles:{title:"Profils",subtitle:"Gérez vos presets slicer et calibrations Pressure Advance",tabs:{bambuCloud:"Bambu Cloud",orcaCloud:"Orca Cloud",local:"Profils Locaux",kprofiles:"Profils K"},orcaCloud:{connectedAs:"Connecté en tant que",logout:"Déconnecter",noLogoutPermission:"Vous n'avez pas la permission de vous déconnecter",noConnectPermission:"Vous n'avez pas la permission de vous connecter à Orca Cloud",retry:"Réessayer",back:"Utiliser une autre méthode de connexion",connect:{title:"Se connecter à Orca Cloud",description:"Connectez-vous à votre compte Orca Cloud pour synchroniser vos profils de slicer dans Bambuddy."},providers:{google:"Se connecter avec Google",apple:"Se connecter avec Apple",github:"Se connecter avec GitHub",email:"Se connecter avec e-mail et mot de passe"},password:{title:"Se connecter avec e-mail et mot de passe",email:"E-mail",emailPlaceholder:"vous@exemple.fr",password:"Mot de passe",submit:"Se connecter"},paste:{title:"Terminer la connexion",step1:"Un nouvel onglet s'est ouvert avec la page de connexion Orca Cloud. Connectez-vous avec votre compte Orca.",step2:`Votre navigateur sera redirigé vers une URL "localhost" qui ne se chargera pas. C'est normal — c'est cette URL qu'il nous faut.`,step3:"Copiez l'URL complète depuis la barre d'adresse de votre navigateur et collez-la ci-dessous.",signInUrl:"Si l'onglet de connexion ne s'est pas ouvert, cliquez sur cette URL :",label:"Collez l'URL de rappel ici",placeholder:"http://localhost:41172/callback?code=...&state=...",submit:"Terminer la connexion"},profiles:{title:"Vos profils Orca Cloud ({{count}})",refresh:"Actualiser",empty:"Aucun profil trouvé dans votre compte Orca Cloud pour le moment."},toast:{connected:"Connecté à Orca Cloud en tant que {{email}}",disconnected:"Déconnecté d'Orca Cloud"},errors:{startFailed:"Impossible de démarrer la connexion à Orca Cloud.",finishFailed:"Impossible de terminer la connexion à Orca Cloud.",passwordFailed:"Impossible de se connecter avec cet e-mail et ce mot de passe.",passwordEmpty:"Veuillez saisir à la fois votre e-mail et votre mot de passe.",emptyPaste:"Veuillez coller l'URL de rappel depuis votre navigateur.",noCode:"Cette URL ne ressemble pas à un rappel Orca Cloud (aucun paramètre code). Copiez l'URL complète depuis la barre d'adresse."}},localProfiles:{title:"Profils Locaux",subtitle:"Gérez vos presets OrcaSlicer",import:"Importer Profils",importDesc:"Déposez les fichiers .bbscfg, .bbsflmt, .orca_filament, .zip ou .json",importing:"Importation...",search:"Chercher un preset...",noPresets:"Aucun preset local",noSearchResults:"Aucun preset ne correspond à votre recherche",badge:"Local",edit:"Modifier",delete:"Supprimer",cancel:"Annuler",deleteConfirmTitle:"Supprimer Preset",deleteConfirm:"Supprimer définitivement ce preset ?",source:"Source",inheritsFrom:"Hérite de",filamentType:"Type",vendor:"Vendeur",compatiblePrinters:"Imprimantes",nozzleTemp:"Temp Buse",cost:"Coût",density:"Densité",pressureAdvance:"Pressure Advance",filament:"Filament",process:"Processus",printer:"Imprimante",toast:{importSuccess:"{{count}} profil(s) importé(s)",importSkipped:"{{count}} profil(s) ignoré(s) (doublons)",importError:"{{count}} erreur(s) d'import",deleted:"Preset supprimé",updated:"Preset mis à jour"}},connectedAs:"Connecté en tant que",logout:"Déconnexion",noLogoutPermission:"Pas d'autorisation de déconnexion",failedToLoad:"Échec chargement profils",retry:"Réessayer",time:{justNow:"À l'instant",minsAgo:"Il y a {{count}}m",hoursAgo:"Il y a {{count}}h",daysAgo:"Il y a {{count}}j"},toast:{loggedOut:"Déconnecté"},login:{title:"Connexion Bambu Cloud",subtitle:"Synchronisez vos presets slicer",email:"E-mail",password:"Mot de passe",region:"Région",regionGlobal:"Global",regionChina:"Chine",verificationCode:"Code de vérification",totpCode:"Code Authenticator",checkEmail:"Code envoyé à {{email}}",enterTotpHint:"Entrez le code 2FA",accessToken:"Jeton d'accès (Access Token)",accessTokenHint:"Collez votre jeton Bambu Cloud. Les comptes de la région Chine doivent passer par ici (liés à un numéro de téléphone — pas de connexion par e-mail). Le wiki explique comment récupérer le jeton depuis les cookies MakerWorld.",back:"Retour",loginButton:"Connexion",verifyButton:"Vérifier",setTokenButton:"Définir Jeton",useToken:"Utiliser jeton d'accès",useEmail:"Connexion par email",toast:{loggedIn:"Connecté avec succès",codeSent:"Code envoyé par email",enterTotp:"Entrez le code Authenticator",tokenSet:"Jeton défini"}},presets:{myPreset:"Mon preset (modifiable)",duplicate:"Dupliquer",editable:"Modifiable",failedToLoadDetails:"Échec détails preset",deleteConfirm:"Supprimer ce preset ?",deleteWarning:'Ceci supprimera "{{name}}" de Bambu Cloud définitivement.',noDuplicatePermission:"Pas d'autorisation duplication",noEditPermission:"Pas d'autorisation modification",noDeletePermission:"Pas d'autorisation suppression",types:{filament:"Preset filament",printer:"Preset imprimante",process:"Preset processus"},toast:{deleted:"Preset supprimé",created:"Preset créé",updated:"Preset mis à jour",duplicated:"Preset dupliqué",fieldAdded:'Champ "{{key}}" ajouté',exported:"Preset exporté"},baseLabel:"Base : {{name}}",currentLabel:"Actuel : {{name}}",newPreset:"Nouveau Preset",editPreset:"Modifier Preset",duplicatePreset:"Dupliquer Preset",createNewPreset:"Créer un nouveau Preset",customizeSettings:"Personnalisez vos réglages",compareWithBase:"Comparer avec la base",compare:"Comparer",basePreset:"Preset de base",selectBasePreset:"Choisir preset de base...",presetName:"Nom du preset",myCustomPreset:"Mon preset personnalisé",inheritsFrom:"Hérite de",dropJsonToImport:"Glissez JSON pour importer",tabs:{common:"Commun",allFields:"Tous les champs"},availableFields:"Champs disponibles",searchFieldsPlaceholder:"Chercher un champ...",noMatchingFields:"Aucun champ trouvé",allFieldsAdded:"Tous les champs sont ajoutés",addCustomField:"Ajouter un champ personnalisé",yourOverrides:"Vos modifications",noOverridesYet:"Aucune modification",clickFieldsToAdd:"Cliquez à gauche pour ajouter",saveAsTemplate:"Enregistrer comme modèle",jsonTip:"Conseil : Glissez un .json pour importer les réglages"},cloudView:{searchPlaceholder:"Chercher presets...",templates:"Modèles",refresh:"Rafraîchir",newPreset:"Nouveau Preset",clearFilters:"Effacer filtres",compareMode:"Mode Comparaison",selectAnotherPreset:"Choisir un autre preset {{type}}",clickTwoPresets:"Choisissez deux presets de même type",selectFirst:"1. Sélectionner premier",selectSecond:"2. Sélectionner second",compareNow:"Comparer maintenant",lastSynced:"Synchronisé :",showingCount:"{{showing}} sur {{total}} presets",noPresetsFound:"Aucun preset trouvé",columns:{filament:"Filament",process:"Processus",printer:"Imprimante"},noFilamentPresets:"Pas de preset filament",noProcessPresets:"Pas de preset processus",noPrinterPresets:"Pas de preset imprimante",filters:{type:"Type",owner:"Propriétaire",printer:"Imprimante",nozzle:"Buse",filament:"Filament",layer:"Couche",all:"Tous",myPresets:"Mes Presets",builtIn:"Inclus",process:"Processus"},noTemplatesPermission:"Pas d'autorisation modèles",noRefreshPermission:"Pas d'autorisation rafraîchissement",noCreatePermission:"Pas d'autorisation création"},templates:{title:"Modèles rapides",noTemplates:"Aucun modèle",createFirst:"Créez-en depuis l'éditeur de preset",typeFilter:"Type :",deleteTitle:"Supprimer modèle",deleteWarning:"Action irréversible",deleteConfirm:'Supprimer "{{name}}" ?',namePlaceholder:"Nom du modèle",descriptionPlaceholder:"Description",settingsJson:"Paramètres (JSON)",fieldsCount:"{{count}} champs",shownInModals:"Visible dans fenêtres",hiddenInModals:"Masqué dans fenêtres",apply:"Appliquer",toast:{deleted:"Modèle supprimé",updated:"Modèle mis à jour",created:"Modèle créé",applied:"Modèle appliqué"}}},support:{debugLoggingActive:"Débogage actif",manageLogs:"Gérer",collectItem7:"Connectivité et versions firmware",collectItem8:"Statut intégrations (Spoolman, MQTT, HA)",collectItem9:"Interfaces réseau (sous-réseaux)",collectItem10:"Versions packages Python",collectItem11:"Santé base de données",collectItem12:"Détails environnement Docker",bundleGenerating:"Génération du paquet...",bundleStepConnection:"Vérification de la connectivité des imprimantes",bundleStepVirtualPrinters:"Vérification de la configuration des imprimantes virtuelles",bundleStepLogScan:"Analyse des journaux récents pour les problèmes connus",bundleStepBuild:"Création du ZIP du paquet de support"},fileManager:{title:"Gestionnaire de fichiers",subtitle:"Organisez vos fichiers d'impression",uploadFiles:"Téléverser fichiers",newFolder:"Nouveau dossier",folderName:"Nom du dossier",folderNamePlaceholder:"ex: Pièces Utiles",renameFile:"Renommer fichier",renameFolder:"Renommer dossier",invalidFilenameChar:`Le caractère "{{char}}" n'est pas autorisé dans les noms de fichier d'impression. La carte SD de l'imprimante refuse : < > : " / \\ | ? *`,moveFiles:"Déplacer {{count}} fichier(s)",rootNoFolder:"Racine (aucun dossier)",current:"actuel",linkFolder:"Lier le dossier",linkFolderDescription:'Lier "{{name}}" à un projet ou archive.',project:"Projet",archive:"Archive",noProjectsFound:"Aucun projet trouvé",noArchivesFound:"Aucune archive trouvée",unlink:"Délier",link:"Lier",dragDropFiles:"Glissez les fichiers ici",dropFilesHere:"Déposez ici",orClickToBrowse:"ou cliquez pour parcourir",allFileTypesSupported:"Tous types supportés. ZIP extraits.",zipFilesDetected:"ZIP détectés",zipExtractOptions:"Choix de structure pour ZIP :",preserveZipStructure:"Garder structure ZIP",createFolderFromZip:"Dossier par nom du ZIP",stlThumbnailGeneration:"Vignettes STL",zipMayContainStl:"Extraction vignettes possible pour STL.",thumbnailsCanBeGenerated:"Génération vignettes (peut être long).",generateThumbnailsForStl:"Générer vignettes STL",threemfDetected:"Fichiers 3MF détectés",threemfExtractionInfo:"Réglages extraits auto du 3MF.",willBeExtracted:"Sera extrait",filesExtracted:"{{count}} fichiers extraits",uploadComplete:"Terminé : {{succeeded}} succès",uploadFailed:"Échec du téléversement",zipFilesFailed:"{{count}} fichiers échoués",uploading:"Téléversement...",changeLink:"Modifier lien...",linkTo:"Lier à...",linkToProjectOrArchive:"Lier à projet ou archive",addToQueue:"Ajouter à la file",schedulePrint:"Planifier",generateThumbnail:"Générer vignette",generateThumbnails:"Générer vignettes",generateThumbnailsForMissing:"Vignettes STL manquantes",gridView:"Grille",listView:"Liste",lowDiskSpaceWarning:"Espace disque faible",lowDiskSpaceDetails:"{{free}} libre sur {{total}}. Seuil : {{threshold}} Go.",files:"Fichiers",folders:"Dossiers",size:"Taille",free:"Libre",allFiles:"Tous les fichiers",allExternal:"Externes",externalIsEmpty:"Aucun fichier externe",externalEmptyDescription:"Les fichiers de vos dossiers externes liés apparaîtront ici.",wrap:"Retour ligne",enableTextWrapping:"Activer retour ligne",disableTextWrapping:"Désactiver retour ligne",collapse:"Réduire",collapseFoldersByDefault:"Réduire les dossiers par défaut",expandFoldersByDefault:"Développer les dossiers par défaut",dragToResizeTooltip:"Glisser pour redimensionner, double-clic reset",searchFiles:"Chercher fichiers...",allTypes:"Tous types",prints:"Impressions",ascending:"Croissant",descending:"Décroissant",resultsCount:"{{showing}} sur {{total}} fichiers",selectAll:"Tout sélectionner",deselectAll:"Tout désélectionner",selected:"{{count}} sélectionnés",adding:"Ajout...",loadingFiles:"Chargement...",folderIsEmpty:"Dossier vide",noFilesYet:"Aucun fichier",folderEmptyDescription:"Téléversez ou déplacez des fichiers ici.",noFilesDescription:"Téléversez des fichiers pour organiser.",noMatchingFiles:"Aucun fichier correspondant",noMatchingFilesDescription:"Ajustez votre recherche.",clearFilters:"Effacer filtres",printedCount:"Imprimé {{count}}x",uploadedBy:"Téléversé par",deleteFolder:"Supprimer dossier",deleteFile:"Supprimer fichier",deleteFilesCount:"Supprimer {{count}} fichiers",deleteFolderConfirm:"Supprimer le dossier et son contenu ?",deleteFileConfirm:"Supprimer ce fichier ?",deleteFilesConfirm:"Supprimer {{count}} fichiers définitivement ?",deleting:"Suppression...",noPermissionRenameFolder:"Pas d'autorisation renommage",noPermissionLinkFolder:"Pas d'autorisation lien",noPermissionDeleteFolder:"Pas d'autorisation suppression dossier",noPermissionPrint:"Pas d'autorisation impression",noPermissionSlice:"Vous n'avez pas la permission de découper des fichiers",noPermissionAddToQueue:"Pas d'autorisation file",noPermissionDownload:"Pas d'autorisation téléchargement",noPermissionRenameFile:"Pas d'autorisation renommage fichier",noPermissionGenerateThumbnail:"Pas d'autorisation vignettes",noPermissionDeleteFile:"Pas d'autorisation suppression fichier",noPermissionCreateFolder:"Pas d'autorisation nouveau dossier",noPermissionUpload:"Pas d'autorisation téléversement",noPermissionMoveFiles:"Pas d'autorisation déplacement",noPermissionDeleteFiles:"Pas d'autorisation suppression groupée",linkExternal:"Lier externe",linkExternalFolder:"Lier un dossier externe",linkExternalFolderDescription:"Monter un répertoire hôte (NAS, USB, partage réseau) dans le gestionnaire de fichiers. Les fichiers ne sont pas copiés — ils sont lus directement depuis le chemin d'origine.",externalFolderNamePlaceholder:"ex. Impressions NAS",externalPath:"Chemin hôte",externalPathHelp:"Chemin absolu du répertoire sur l'hôte Docker. Doit être monté en bind dans le conteneur.",readOnly:"Lecture seule",readOnlyHelp:"empêche les téléversements et suppressions",showHiddenFiles:"Afficher les fichiers cachés (fichiers point)",externalFolder:"Dossier externe",scanFolder:"Scanner",toast:{folderCreated:"Dossier créé",folderDeleted:"Dossier supprimé",fileDeleted:"Fichier supprimé",filesDeleted:"{{count}} fichiers supprimés",filesMoved:"Fichiers déplacés",folderLinked:"Dossier lié",folderUnlinked:"Dossier délié",externalFolderLinked:"Dossier externe lié et scanné",folderScanned:"Scan terminé : {{added}} ajoutés, {{removed}} supprimés",addedToQueue:"{{count}} fichier(s) ajouté(s)",addedToQueuePartial:"{{added}} ajoutés, {{failed}} échecs",failedToAddToQueue:"Échec ajout file : {{error}}",fileRenamed:"Fichier renommé",folderRenamed:"Dossier renommé",thumbnailsGenerated:"{{count}} vignette(s) générée(s)",thumbnailsGeneratedPartial:"{{succeeded}} succès, {{failed}} échecs",noStlMissingThumbnails:"Aucun STL sans vignette",failedToGenerateThumbnails:"Échec vignettes : {{error}}",thumbnailGenerated:"Vignette générée",failedToGenerateThumbnail:"Échec vignette : {{error}}"}},projects:{title:"Projets",subtitle:"Suivez vos projets d'impression 3D",newProject:"Nouveau Projet",editProject:"Modifier Projet",deleteProject:"Supprimer Projet",projectName:"Nom du Projet",description:"Description",noProjects:"Aucun projet",noProjectsFiltered:"Aucun projet {{status}}",noProjectsFilteredHelp:`Vous n'avez aucun projet "{{status}}". Les projets apparaîtront ici lorsque leur statut changera.`,createFirst:"Créez votre premier projet pour organiser vos builds.",createFirstButton:"Créer votre premier projet",create:"Créer",files:"Fichiers",prints:"Impressions",plates:"plateaux",parts:"pièces",lastModified:"Modifié le",deleteConfirm:"Supprimer ce projet ? Les archives seront déliées mais conservées.",addFiles:"Ajouter fichiers",removeFile:"Retirer fichier",viewDetails:"Détails",namePlaceholder:"ex: Build Voron 2.4",descriptionPlaceholder:"Description optionnelle...",urlLabel:"URL",urlPlaceholder:"https://makerworld.com/...",urlInvalid:"L'URL doit commencer par http:// ou https://",openExternalUrl:"Ouvrir l’URL du projet",coverImageLabel:"Photo de couverture",coverImageAlt:"Photo de couverture du projet",coverImageUpload:"Téléverser",coverImageReplace:"Remplacer",coverImageRemove:"Supprimer",color:"Couleur",targetPlates:"Plateaux cibles",targetPlatesPlaceholder:"ex: 25",targetPlatesHelp:"Nombre total de jobs",targetParts:"Pièces cibles",targetPartsPlaceholder:"ex: 150",targetPartsHelp:"Nombre total d'objets",tagsLabel:"Tags (séparés par virgules)",tagsPlaceholder:"ex: voron, cadeau",dueDate:"Échéance",priority:"Priorité",priorityLow:"Basse",priorityNormal:"Normale",priorityHigh:"Haute",priorityUrgent:"Urgente",statusActive:"Actif",statusCompleted:"Terminé",statusArchived:"Archivé",done:"Fait",completed:"terminé",failed:"échoué",inQueue:"en file",noPrintsYet:"Aucune impression",printJobs:"Jobs (plateaux)",partsPrinted:"Pièces imprimées",failedParts:"Pièces échouées",import:"Importer",export:"Exporter",importProject:"Importer projet",exportAll:"Exporter tous les projets",loading:"Chargement des projets...",noEditPermission:"Pas d'autorisation de modification",noDeletePermission:"Pas d'autorisation de suppression",noCreatePermission:"Pas d'autorisation de création",noImportPermission:"Pas d'autorisation d'import",noExportPermission:"Pas d'autorisation d'export",toast:{created:"Projet créé",updated:"Projet mis à jour",deleted:"Projet supprimé",imported:"Projet importé",multipleImported:"{{count}} projets importés",importFailed:"Échec d'import",exported:"Projets exportés (métadonnées)"}},projectDetail:{notFound:"Projet non trouvé",backToProjects:"Retour aux Projets",export:"Exporter",exportProject:"Exporter projet",noExportPermission:"Pas d'autorisation export",noEditPermission:"Pas d'autorisation modification",partOf:"Fait partie de :",priorityLabel:"Priorité :",noPrints:"Aucune impression dans ce projet",status:{active:"Actif",completed:"Terminé",archived:"Archivé"},priority:{low:"Basse",normal:"Normale",high:"Haute",urgent:"Urgente"},dueDate:{overdue:"En retard",today:"Aujourd'hui",daysLeft:"{{count}} jours restants"},progress:{platesProgress:"Progression Plateaux",partsProgress:"Progression Pièces",printJobs:"jobs d'impression",parts:"pièces",percentComplete:"{{percent}}% terminé",remaining:"{{count}} restant(s)"},stats:{printJobs:"Jobs d'Impression",total:"total",failed:"{{count}} échecs",partsPrinted:"{{count}} pièces imprimées",printTime:"Temps d'Impression",filamentUsed:"Filament utilisé"},cost:{title:"Suivi des coûts",filamentCost:"Coût Filament",energy:"Énergie",totalCost:"Coût Total",total:"Total",includesBom:"BOM incluse",budget:"Budget",remaining:"Restant"},subProjects:{title:"Sous-projets ({{count}})"},notes:{title:"Notes",noEditPermission:"Pas d'autorisation modification",placeholder:"Ajouter des notes...",empty:"Aucune note. Cliquez sur modifier."},files:{title:"Fichiers",linkFolders:"Liez des dossiers depuis le gestionnaire",forQuickAccess:"pour un accès rapide.",fileCount:"{{count}} fichier(s)",empty:"Aucun dossier lié.",noFiles:"Aucun fichier dans ce dossier.",print:"Imprimer maintenant",addToQueue:"Ajouter à la file"},bom:{title:"BOM (Liste matériel)",acquired:"{{completed}}/{{total}} acquis",showAll:"Tout afficher",hideDone:"Masquer acquis",addPart:"Ajouter matériel",noAddPermission:"Pas d'autorisation ajout",partNamePlaceholder:"Nom (ex: Vis M3x8)",partName:"Nom de pièce",qty:"Qté",price:"Prix ({{currency}})",sourcingUrlPlaceholder:"Lien d'achat (optionnel)",remarksPlaceholder:"Remarques (optionnel)",deletePart:"Supprimer pièce",deleteConfirm:'Supprimer "{{name}}" ?',noUpdatePermission:"Pas d'autorisation mise à jour",noEditPermission:"Pas d'autorisation modification",noDeletePermission:"Pas d'autorisation suppression",totalCost:"Coût total :",empty:"BOM vide. Ajoutez du matériel ou de l'électronique."},timeline:{title:"Historique d'activité",empty:"Aucune activité."},template:{saveAsTemplate:"Enregistrer comme modèle",noCreatePermission:"Pas d'autorisation modèle"},queue:{title:"File d'attente",viewAll:"Tout voir",printing:"{{count}} en cours",queued:"{{count}} en file"},prints:{title:"Impressions ({{count}})"},toast:{projectUpdated:"Projet mis à jour",partAdded:"Pièce ajoutée",partRemoved:"Pièce retirée",exportFailed:"Échec export",projectExported:"Projet exporté",templateCreated:"Modèle créé"}},system:{title:"Informations Système",version:"Version",uptime:"Temps de fonctionnement",cpuUsage:"Utilisation CPU",memoryUsage:"Utilisation RAM",diskUsage:"Utilisation Disque",networkInfo:"Infos Réseau",logs:"Journaux",debugMode:"Mode Débogage",enableDebug:"Activer débogage",disableDebug:"Désactiver débogage",downloadLogs:"Télécharger logs",clearLogs:"Effacer logs",dockerInfo:"Infos Docker",containerName:"Nom conteneur",imageName:"Nom image",platform:"Plateforme",architecture:"Architecture"},library:{title:"Bibliothèque Filament",addFilament:"Ajouter Filament",editFilament:"Modifier Filament",deleteFilament:"Supprimer Filament",vendor:"Vendeur",material:"Matériau",color:"Couleur",kFactor:"Facteur K",temperature:"Température",noFilaments:"Bibliothèque vide",deleteConfirm:"Supprimer ce filament ?",importFromPrinter:"Importer de l'imprimante",exportToFile:"Exporter vers fichier"},slice:{title:"Slicer le modèle",action:"Slicer",actionAll:"Slicer les {{count}} plateaux",actionAllTitle:"Slicer tous les plateaux dans une sortie multi-plateaux (une seule archive). La sélection de filament couvre chaque emplacement défini par le projet.",allPlatesToggle:"Slicer les {{count}} plateaux",slicing:"Découpage…",printer:"Profil d'imprimante",process:"Profil de processus",filament:"Profil de filament",filamentSlot:"Filament {{index}} – {{type}}",selectPreset:"— Sélectionner un préréglage —",loadingPresets:"Chargement des préréglages…",analyzingPlateFilaments:"Analyse des filaments de la plaque…",analyzingPlateFilamentsHint:"Exécution d'un découpage d'aperçu pour identifier les emplacements AMS utilisés. Mis en cache après — la réouverture est instantanée.",previewToast:"Analyse de {{name}} – {{elapsed}}",previewWithProgress:"Analyse de {{name}} – {{stage}} ({{percent}} %) – {{elapsed}}",notUsedByPlate:"— non utilisé par cette plaque",noPresetsForSlot:"Aucun préréglage disponible",otherPrinters:"Autres imprimantes",presetsLoadFailed:"Échec du chargement des préréglages. Ouvrez Paramètres → Profils pour les importer d'abord.",refreshPresets:"Actualiser",refreshPresetsTitle:"Actualiser les préréglages — récupérer les dernières listes Cloud et bundle (à utiliser après avoir supprimé un préréglage dans Bambu Studio ou Bambu Handy)",allPresetsRequired:"Tous les préréglages doivent être sélectionnés",bundle:"Pack de découpage",bundleNone:"— Aucun (choisir les préréglages individuellement) —",bundleAllRequired:"Le processus du pack et chaque emplacement de filament doivent être choisis",enqueuing:"Envoi du travail de découpage…",queued:"En file d'attente…",failed:"Échec du découpage. Vérifiez les journaux du sidecar.",startedToast:"Découpage de {{name}} en arrière-plan…",queuedToast:"En attente : {{name}} – {{elapsed}}",runningToast:"Découpage {{name}} – {{elapsed}}",runningWithProgress:"{{name}} – {{stage}} ({{percent}} %) – {{elapsed}}",runningWithProgressMultiPlate:"Plateau {{plateIndex}} sur {{plateCount}} • {{name}} – {{stage}} ({{percent}} %) – {{elapsed}}",completedToast:"{{name}} découpé",failedTitle:"Échec du découpage",failedToast:"Échec du découpage de {{name}} : {{detail}}",tier:{local:"Importé",cloud:"Bambu Cloud",orcaCloud:"Orca Cloud",standard:"Standard"},cloud:{notAuthenticated:"Connectez-vous à Bambu Cloud (Paramètres → Profils → Bambu Cloud) pour voir vos préréglages cloud.",expired:"Session Bambu Cloud expirée – reconnectez-vous pour actualiser vos préréglages cloud.",unreachable:"Bambu Cloud est inaccessible. Les préréglages locaux et standards fonctionnent encore."},orcaCloud:{notAuthenticated:"Connectez-vous à Orca Cloud (Profils → Orca Cloud) pour voir vos préréglages Orca.",expired:"Session Orca Cloud expirée — reconnectez-vous pour actualiser vos préréglages Orca.",unreachable:"Orca Cloud est indisponible pour le moment. Les autres préréglages fonctionnent toujours."},bedType:{label:"Plateau d'impression",auto:"Auto (utiliser le préréglage de processus)",coolPlate:"Cool Plate",coolPlateSuperTack:"Cool Plate SuperTack",engineering:"Engineering Plate",highTemp:"High Temp Plate",texturedPEI:"Textured PEI Plate",smoothPEI:"Smooth PEI Plate"}},spoolman:{title:"Intégration Spoolman",enabled:"Spoolman Activé",url:"URL Spoolman",connected:"Connecté",disconnected:"Non Connecté",testConnection:"Tester connexion",sync:"Synchroniser",syncing:"Sync...",lastSync:"Dernière Sync",linkToSpoolman:"Lier à Spoolman",openInSpoolman:"Ouvrir Spoolman",unlinkSpool:"Délier bobine",unlinkConfirmTitle:"Désassigner la bobine ?",unlinkConfirmMessage:"Cela retirera la bobine de cet emplacement. Les données de la bobine elles-mêmes resteront inchangées.",selectSpool:"Choisir bobine",noUnlinkedSpools:"Pas de bobine libre",linkSuccess:"Bobine assignée avec succès",linkFailed:"Échec de l’assignation",unlinkSuccess:"Bobine désassignée avec succès",unlinkFailed:"Échec du désassignement",linkedSpool:"Bobine assignée",spoolId:"ID Bobine",fillSourceLabel:"(Spoolman)",weight:"Poids",remaining:"Restant",disableWeightSync:"Désactiver Sync poids estimé AMS",disableWeightSyncDesc:"Ne pas utiliser les estimations AMS. Utile si vous préférez le suivi Spoolman.",reportPartialUsage:"Rapporter consommation partielle pour échecs",reportPartialUsageDesc:"Si l'impression échoue, rapporte le filament consommé selon les couches."},inventory:{title:"Inventaire de Bobines",subtitle:"Gérez vos bobines",spoolmanMixedContentTitle:"Spoolman ne peut pas se charger en HTTPS — contenu mixte bloqué par votre navigateur",spoolmanMixedContentBody:"Bambuddy est servi en HTTPS (via votre reverse proxy), mais votre URL Spoolman est encore en HTTP. Les navigateurs bloquent le contenu mixte pour des raisons de sécurité, donc l'interface Spoolman intégrée ne peut pas s'afficher. Spoolman doit être accessible en HTTPS.",spoolmanMixedContentFixReverseProxy:"Placez Spoolman derrière le même reverse proxy que Bambuddy (Traefik / Nginx / Caddy) en HTTPS, puis mettez à jour l'URL Spoolman dans les Paramètres avec la nouvelle adresse HTTPS.",spoolmanMixedContentFixOpenNewTab:"Alternative : ouvrez Spoolman dans un nouvel onglet en HTTP — les règles de contenu mixte ne s'appliquent qu'aux cadres intégrés, un onglet autonome fonctionne.",spoolmanOpenInNewTab:"Ouvrir Spoolman dans un nouvel onglet",labels:{title:"Imprimer étiquettes de bobines",selectedCount:"{{count}} sélectionné",pickSpools:"Choisissez les bobines pour lesquelles imprimer des étiquettes :",searchPlaceholder:"Rechercher par nom, marque ou #ID",filterByMaterial:"Matériau :",allMaterials:"Tout",selectVisible:"Sélectionner tout visible ({{count}})",deselectVisible:"Désélectionner visible",clearAll:"Tout effacer",noSpoolsToShow:"Aucune bobine à afficher. Ajustez votre filtre et réessayez.",noMatches:"Aucune bobine ne correspond à la recherche ou au filtre actuel.",printOne:"Imprimer l'étiquette de cette bobine",printLabels:"Imprimer les étiquettes…",bulkTitle:"Choisissez les bobines à étiqueter parmi les {{count}} affichées",noSpoolsTitle:"Aucune bobine à étiqueter",error:"Impossible de générer les étiquettes : {{msg}}",sortBy:{label:"Trier :",id:"Par ID",color:"Par couleur"},templates:{amsHolderSmall:{label:"Support AMS — petit (74 × 33 mm)",hint:"Une étiquette par page ; correspond à l'étiquette imprimable du modèle MakerWorld 752566 (Support d'étiquettes pour filament AMS)."},amsHolderLarge:{label:"Support AMS — grand (75 × 55 mm)",hint:"Une étiquette par page ; s'adapte à la variante carton du support d'étiquettes pour filament AMS. Assez d'espace pour pastille, marque, matériau, ID et QR code."},box40x30:{label:"Étiquette boîte (40 × 30 mm)",hint:"Une étiquette par page ; taille de rouleau DK/Brother courante, idéale pour étiqueter sachets de filament et bacs de stockage."},box:{label:"Box label (62 × 29 mm)",hint:"Une étiquette par page ; dimensionnée pour Brother PT/QL et petites étiquettes Dymo."},averyL7160:{label:"Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)",hint:"Format de feuille UE ; 21 étiquettes par page A4."},avery5160:{label:"Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)",hint:"Format de feuille US ; 30 étiquettes par page Letter."}}},addSpool:"Ajouter Bobine",editSpool:"Modifier Bobine",copySpool:"Copier Bobine",material:"Matériau",selectMaterial:"Choisir matériau...",subtype:"Sous-type",brand:"Marque",searchBrand:"Chercher marque...",useCustomBrand:'Utiliser "{{brand}}"',useCustomMaterial:"Utiliser un matériau personnalisé : {{material}}",colorName:"Nom de couleur",colorNamePlaceholder:"Blanc Jade, Rouge Feu...",color:"Couleur",hexColor:"Code Hex",pickColor:"Choisir couleur perso",labelWeight:"Poids net",coreWeight:"Poids bobine vide",searchSpoolWeight:"Chercher poids bobine...",weightUsed:"Consommé",currentWeight:"Poids restant",measuredWeight:"Poids mesuré",spoolName:"Bobine",costPerKg:"Coût par kg",storageLocation:"Emplacement de stockage",storageLocationPlaceholder:"ex. Étagère A, Tiroir 1",openInInventory:"Ouvrir dans l'inventaire",measuredWeightError:"Le poids mesuré doit être entre {{min}}g et {{max}}g.",slicerFilament:"Filament Slicer",slicerFilamentName:"Nom du Preset Slicer",slicerPreset:"Preset Slicer",searchPresets:"Chercher presets...",selectedPreset:"Sélectionné",noPresetsFound:"Aucun preset trouvé",tempOverrides:"Exceptions Température",note:"Note",notePlaceholder:"Notes additionnelles sur cette bobine...",category:"Catégorie",categoryPlaceholder:"ex. Production, Prototype, Client A",categoryNone:"Sans catégorie",storageLocationNone:"Aucun emplacement défini",lowStockThresholdOverride:"Seuil bas (cette bobine)",lowStockThresholdOverrideHelp:"Laisser vide pour utiliser le seuil global ({{global}} %).",clearRfid:"Effacer le tag RFID",rfidCleared:"Tag RFID effacé",archive:"Archiver",restore:"Restaurer",noSpools:"Aucune bobine. Ajoutez votre première bobine pour commencer.",noAvailableSpools:"Aucune bobine disponible. Ajoutez une bobine à votre inventaire ou désaffectez-en une d'un autre emplacement.",kProfiles:"Profils K",addKProfile:"Ajouter K-Profile",assignSpool:"Assigner Bobine",unassignSpool:"Désassigner",assignSuccess:"Bobine assignée et slot AMS configuré",assignFailed:"Échec assignation",selectSpool:"Choisir une bobine pour ce slot",assigned:"Assigné",assigning:"Assignation...",searchSpools:"Chercher bobines...",showAllSpools:"Afficher toutes les bobines",spoolmanSpools:"Bobines Spoolman",allMaterials:"Tous Matériaux",filterByBrand:"Filtrer par marque...",showArchived:"Afficher archivées",quickAdd:"Ajout rapide (Stock)",quantity:"Quantité",stock:"Stock",configured:"Configuré",spoolsCreated:"{{count}} bobines créées",spoolsPartiallyCreated:"{{created}} sur {{total}} bobines créées (certaines ont échoué)",spoolCreated:"Bobine créée",spoolUpdated:"Bobine mise à jour",spoolDeleted:"Bobine supprimée",deepLinkSpoolNotFound:"Bobine introuvable",deepLinkFetchFailed:"Impossible de charger la bobine — réessayez",spoolArchived:"Bobine archivée",spoolRestored:"Bobine restaurée",kProfileSaveFailed:"Les paramètres de profil K n'ont pas pu être enregistrés",syncWeightSpoolNotFound:"Bobine introuvable — elle a peut-être été supprimée",syncWeightSpoolmanUnreachable:"Spoolman est inaccessible — réessayez plus tard",syncWeightFailed:"Échec de la synchronisation du poids",spoolmanUnreachable:"Spoolman est inaccessible — veuillez réessayer plus tard",deleteSpoolNotFound:"Bobine introuvable — elle a peut-être déjà été supprimée",deleteFailed:"Impossible de supprimer la bobine",archiveSpoolNotFound:"Bobine introuvable — elle a peut-être déjà été supprimée",archiveFailed:"Impossible d'archiver la bobine",restoreSpoolNotFound:"Bobine introuvable — elle a peut-être déjà été supprimée",restoreFailed:"Impossible de restaurer la bobine",saveFailed:"Impossible d'enregistrer les modifications",tagClearFailed:"Impossible de supprimer le tag",deleteConfirm:"Supprimer définitivement cette bobine ?",archiveConfirm:"Voulez-vous vraiment archiver cette bobine ?",advancedSettings:"Paramètres Avancés",filamentInfoTab:"Infos Filament",paProfileTab:"Profil PA",filamentInfo:"Filament",additional:"Additionnel",loadingPresets:"Chargement des presets cloud...",cloudConnected:"Cloud connecté",cloudNotConnected:"Cloud déconnecté (valeurs par défaut)",recentColors:"Récentes",searchColors:"Chercher couleurs...",searchResults:"Résultats",allColors:"Toutes",commonColors:"Communes",showLess:"Moins",showAll:"Toutes",noColorsFound:"Aucune couleur correspondante",noResults:"Aucun résultat",extraColorsLabel:"Couleurs supplémentaires",extraColorsPlaceholder:"EC984C,#6CD4BC,A66EB9,D87694",extraColorsHint:"Collez 2 à 8 stops hex, séparés par des virgules. Affiché en dégradé.",extraColorsInvalid:"Hex non valides ignorés : {{tokens}}",colorEffectLabel:"Effet",colorEffect:{none:"Aucun",sparkle:"Pailleté",wood:"Bois",marble:"Marbre",glow:"Lueur",matte:"Mat",silk:"Soie",galaxy:"Galaxie",rainbow:"Arc-en-ciel",metal:"Métal",translucent:"Translucide",gradient:"Dégradé",dualColor:"Bicolore",triColor:"Tricolore",multicolor:"Multicolore"},selectMaterialFirst:"Veuillez choisir un matériau dans l'onglet Infos Filament.",noPrintersConfigured:"Ajoutez une imprimante pour utiliser les profils PA.",matchingFilter:"Correspondant",anyBrand:"Toute marque",anyVariant:"Toute variante",autoSelect:"Auto-sélection",matches:"correspondances",match:"correspondance",noMatches:"Aucune correspondance",connected:"Connecté",offline:"Hors ligne",printerOffline:"Imprimante hors ligne. Connectez-vous pour voir les profils.",noKProfilesMatch:"Aucun profil K ne correspond au filament.",leftNozzle:"Buse Gauche",rightNozzle:"Buse Droite",profilesSelected:"profil(s) de calibration sélectionné(s)",totalInventory:"Total Inventaire",totalConsumed:"Total Consommé",byMaterial:"Par Matériau",inPrinter:"Dans Imprimante",lowStock:"Stock Bas",sinceTracking:"Depuis le début du suivi",resetConsumedCounter:"Réinitialiser le compteur",resetConsumedCounterTooltip:"Remettre à zéro le compteur de grammes consommés pour cette bobine. Le poids restant n'est pas modifié.",resetConsumedCounterConfirm:"Remettre à 0 le compteur de grammes consommés de cette bobine ? Les futures impressions repartiront de zéro. La bobine, son calcul de poids restant et vos paramètres ne sont pas modifiés.",resetAllConsumedCounters:"Réinitialiser tous les compteurs",resetAllConsumedCountersTooltip:"Remettre à zéro le compteur de grammes consommés sur chaque bobine. Les poids restants ne sont pas modifiés.",resetAllConsumedCountersConfirm:"Remettre à 0 le compteur de grammes consommés sur les {{count}} bobines (archivées incluses) ? Cela efface la valeur « Total Consommé » pour que les futures impressions repartent de zéro. Les bobines et les poids restants ne sont pas modifiés.",consumedCounterReset:"Compteur réinitialisé",allConsumedCountersReset:"Compteur réinitialisé pour {{count}} bobine(s)",resetConsumedCounterFailed:"Échec de la réinitialisation du compteur",loadedInAms:"Chargé dans AMS/Ext",remaining:"Restant",weightCheck:"Vérification poids",lastWeighed:"Dernière pesée",neverWeighed:"Jamais pesé",search:"Chercher bobines...",showing:"Affichage",to:"à",of:"sur",show:"Voir",spools:"bobines",spool:"bobine",page:"Page",noSpoolsMatch:"Aucun résultat trouvé",noSpoolsMatchDesc:"Ajustez votre recherche ou vos filtres.",active:"Actif",archived:"Archivé",all:"Tous",used:"Occasion",new:"Neuf",clearFilters:"Effacer filtres",table:"Tableau",cards:"Cartes",net:"Réseau",groupSimilar:"Grouper",groupedSpools:"{{count}} bobines identiques",groupedRows:"lignes",columns:"Colonnes",configureColumns:"Configurer Colonnes",configureColumnsDesc:"Glissez pour ordonner ou utilisez les flèches. Cliquez sur l'œil pour masquer.",visible:"visible",reset:"Réinitialiser",cancel:"Annuler",applyChanges:"Appliquer",moveUp:"Monter",moveDown:"Descendre",hideColumn:"Masquer",showColumn:"Afficher",linkToSpool:"Lier à une Bobine",tagLinked:"Tag lié à la bobine",tagLinkFailed:"Échec lien tag",tagAlreadyLinked:"Tag déjà lié à une autre bobine",unknownTag:"Tag RFID inconnu détecté",usageHistory:"Historique de Consommation",noUsageHistory:"Aucune consommation enregistrée",printName:"Nom Impression",weightConsumed:"Poids consommé",clearHistory:"Effacer",historyCleared:"Historique effacé",fillSourceLabel:"(Inv)",lowStockThresholdError:"Le seuil doit être compris entre 0.1 et 99.9",assignMismatchTitle:"Incompatibilité de matériau",assignMismatchMessage:'Le matériau de la bobine sélectionnée "{{spoolMaterial}}" ne correspond pas au matériau du plateau "{{trayMaterial}}" pour {{location}}. Assigner quand même ?',assignMismatchConfirm:"Assigner quand même",assignPartialMismatchMessage:'Le matériau de la bobine "{{spoolMaterial}}" est similaire, mais ne correspond pas exactement à "{{trayMaterial}}" dans {{location}}. Voulez-vous continuer ?',assignProfileMismatchMessage:'Le profil de la bobine "{{spoolProfile}}" ne correspond pas au profil du plateau "{{trayProfile}}" dans {{location}}. Voulez-vous continuer ?',assignReconfigureNote:"Le slot AMS sera reconfiguré pour utiliser le profil de la bobine.",spoolmanFilamentCatalog:"Catalogue de filaments Spoolman",pickFromSpoolmanCatalog:"Choisir dans le catalogue Spoolman…",spoolmanFilamentSelected:"Filament sélectionné depuis le catalogue Spoolman",spoolmanFilamentUnlinked:"Lien avec le catalogue de filaments supprimé",noSpoolmanFilaments:"Aucun filament trouvé dans le catalogue Spoolman",spoolmanFilamentColorSwatch:"Couleur du filament",spoolWeightManagedBySpoolman:"Le poids de la bobine vide est géré par type de filament dans Spoolman",spoolmanCatalogLoadFailed:"Impossible de charger le catalogue Spoolman"},timelapse:{title:"Time-lapse",create:"Créer Timelapse",download:"Télécharger",delete:"Supprimer",preview:"Aperçu",frameRate:"Images/sec",quality:"Qualité",processing:"Traitement...",noTimelapses:"Aucun timelapse"},ams:{title:"AMS",slot:"Emplacement",empty:"Vide",emptySlot:"Slot vide",slotEmpty:"Vide",emptySlotReset:"Aucune bobine assignée",unknown:"Inconnu",humidity:"Humidité",temperature:"Température",filamentType:"Type filament",filamentColor:"Couleur",remaining:"Restant",history:"Historique AMS",noHistory:"Aucun historique",configureSlot:"Configurer Slot",externalSpool:"Bobine externe",profile:"Profil",kFactor:"Facteur K",fill:"Remplir",configure:"Configurer",used:"utilisé",remainingUnit:"restant"},printModal:{title:"Lancer l'impression",selectPrinter:"Choisir l'imprimante",selectPlate:"Choisir le plateau",filamentMapping:"Mapping Filament",totalCost:"Coût total :",slotRemainingShort:" - {{grams}}g rest.",printSettings:"Réglages d'impression",bedLeveling:"Nivellement plateau",flowCalibration:"Calibration débit",vibrationCalibration:"Vibration (Input Shaper)",layerInspection:"Inspection 1ère couche",timelapse:"Time-lapse",startPrint:"Démarrer",addToQueue:"Ajouter à la file",cancel:"Annuler",noPrintersAvailable:"Aucune imprimante disponible",printerBusy:"L'imprimante est occupée",printerOffline:"L'imprimante est hors ligne",sameTypeDifferentColor:"Même type, couleur différente",filamentTypeNotLoaded:"Type de filament non chargé",openCalendar:"Ouvrir calendrier",leftNozzle:"G",rightNozzle:"D",leftNozzleTooltip:"Buse gauche",rightNozzleTooltip:"Buse droite",filamentOverride:"Remplacement de filament",filamentOverrideHint:"Remplacez optionnellement les filaments pour l'affectation par modèle. Le planificateur utilisera vos filaments sélectionnés au lieu des valeurs 3MF d'origine.",originalFilament:"Original",overrideWith:"Remplacer par",resetToOriginal:"Revenir à l'original",insufficientFilamentTitle:"Filament insuffisant",insufficientFilamentMessage:"Certaines bobines assignées ont moins de filament restant que nécessaire pour cette impression :",insufficientFilamentLine:"{{printer}} - {{slot}} : nécessite {{required}}g, restant {{remaining}}g",printAnyway:"Imprimer quand même",forceColorMatch:"Forcer correspondance des couleurs",staggerPrinterStarts:"Échelonner démarrages",staggerGroupSize:"Taille du groupe",staggerInterval:"Intervalle (min)",staggerPreview:"{{printers}} imprimantes → {{groups}} groupes de {{size}}, démarrage toutes les {{interval}} min",staggerLastGroup:"dernier groupe : {{count}}",staggerTotal:"total : {{minutes}} min",staggerToPrinters:"Échelonner sur {{count}} imprimantes",gcodeInjection:"Injecter le G-code auto-impression"},backup:{includesEncryptionKey:"Les sauvegardes locales incluent le fichier de clé de chiffrement MFA (DATA_DIR/.mfa_encryption_key), donc un ZIP de sauvegarde est autonome. Traitez le ZIP comme sensible — quiconque possède le fichier peut déchiffrer les secrets client OIDC et TOTP qu'il contient.",title:"Sauvegarde & Restauration",createBackup:"Créer Sauvegarde",restoreBackup:"Restaurer Sauvegarde",restoreDescription:"Remplace les données par un fichier de sauvegarde",downloadBackup:"Télécharger Sauvegarde",uploadBackup:"Téléverser Sauvegarde",lastBackup:"Dernière sauvegarde",autoBackup:"Sauvegarde auto",backupNow:"Sauvegarder maintenant",restoreWarning:"Attention : Écrase TOUTES les données actuelles.",includeArchives:"Inclure Archives",includeSettings:"Inclure Paramètres",includeProfiles:"Inclure Profils",backupSuccess:"Sauvegarde réussie",restoreSuccess:"Restauration réussie",backupFailed:"Échec sauvegarde",restoreFailed:"Échec restauration",restoreNote:"L'imprimante virtuelle sera arrêtée pendant la restauration",githubBackup:"Sauvegarde GitHub",enabled:"Activé",cloudLoginRequired:"Connexion Bambu Cloud requise. Connectez-vous sous Profils → Profils Cloud pour activer la sauvegarde GitHub.",cloudLoginRequiredShort:"Connexion Cloud requise",githubDescription:"Synchronisez automatiquement vos profils vers un dépôt GitHub privé pour la sauvegarde et l'historique des versions.",repoIsPrivate:"Le dépôt est privé — la sauvegarde peut s'y faire en toute sécurité.",repoIsPublicWarning:"Le dépôt est PUBLIC. Les sauvegardes Bambuddy contiennent les identifiants MQTT, les jetons Home Assistant, les jetons Prometheus, votre adresse Bambu Cloud, et les codes d'accès des imprimantes via les K-profils. L'enregistrement est bloqué tant que le dépôt n'est pas passé en privé dans les paramètres de votre hébergeur.",repoVisibilityUnknown:"Impossible de déterminer la visibilité du dépôt. Bambuddy refuse toute sauvegarde vers un dépôt non confirmé privé ; l'enregistrement sera bloqué.",repositoryUrl:"URL du dépôt",repoUrlPlaceholderGitHub:"https://github.com/username/repo-name",repoUrlPlaceholderGitea:"https://gitea.example.com/username/repo-name",repoUrlPlaceholderForgejo:"https://forgejo.example.com/username/repo-name",repoUrlPlaceholderGitLab:"https://gitlab.com/username/repo-name",allowInsecureHttp:"Autoriser HTTP non sécurisé",allowInsecureHttpHint:"Activer pour les instances auto-hébergées sur des réseaux privés sans TLS",personalAccessToken:"Jeton d'accès personnel",tokenSaved:"(enregistré)",enterNewToken:"Entrez un nouveau jeton pour mettre à jour",tokenHint:"Jeton à granularité fine avec permission de lecture/écriture du contenu",branch:"Branche",provider:"Fournisseur Git",providerGitHub:"GitHub",providerGitLab:"GitLab",providerGitea:"Gitea",providerForgejo:"Forgejo",manualOnly:"Manuel uniquement",hourly:"Toutes les heures",daily:"Quotidien",weekly:"Hebdomadaire",includeInBackup:"Inclure dans la sauvegarde",kProfiles:"K-Profils",kProfilesDescription:"Calibration de l'avance de pression des imprimantes connectées",noPrintersConnected:"Aucune imprimante connectée",printersConnected:"{{connected}}/{{total}} connectées",cloudProfiles:"Profils Cloud",cloudProfilesDescription:"Préréglages de filament, imprimante et processus depuis Bambu Cloud",appSettings:"Paramètres de l'application",appSettingsDescription:"Configuration Bambuddy (base de données complète)",spoolInventory:"Inventaire des bobines",spoolInventoryDescription:"Bobines de filament, historique d'utilisation et suivi des coûts",printArchives:"Archives d'impression",printArchivesDescription:"Métadonnées de l'historique d'impression (pas de fichiers gcode/3MF)",lastBackupAt:"Dernière sauvegarde :",noBackupsYet:"Aucune sauvegarde pour l'instant",next:"Prochaine :",startingBackup:"Démarrage de la sauvegarde...",test:"Tester",enableBackup:"Activer la sauvegarde",testConnection:"Tester la connexion",enterRepoUrl:"Entrez l'URL du dépôt",enterRepoAndToken:"Entrez l'URL du dépôt et le jeton d'accès",repoRequired:"L'URL du dépôt est requise",tokenRequired:"Le jeton d'accès est requis",githubBackupEnabled:"Sauvegarde GitHub activée",tokenUpdated:"Jeton mis à jour",settingsSaved:"Paramètres enregistrés",failedToSave:"Échec de l'enregistrement : {{message}}",backupCompleteFiles:"Sauvegarde terminée - {{count}} fichiers mis à jour",backupSkippedNoChanges:"Sauvegarde ignorée - aucun changement",backupFailed2:"Échec de la sauvegarde : {{message}}",clearedLogs:"{{count}} journaux supprimés",failedToClearLogs:"Échec de la suppression des journaux : {{message}}",history:"Historique",clear:"Effacer",date:"Date",status:"Statut",commit:"Commit",localBackup:"Sauvegarde locale",localBackupDescription:"Créez une sauvegarde complète de vos données Bambuddy incluant la base de données, les archives, les téléchargements et tous les fichiers.",downloadBackupLabel:"Télécharger la sauvegarde",completeBackupZip:"Sauvegarde complète : base de données + tous les fichiers (ZIP)",download:"Télécharger",preparingBackup:"Préparation de la sauvegarde...",creatingArchive:"Création de l'archive de sauvegarde... Cela peut prendre un moment pour les archives volumineuses.",downloadingFile:"Téléchargement du fichier de sauvegarde...",backupDownloaded:"Sauvegarde téléchargée avec succès",failedToCreateBackup:"Échec de la création de la sauvegarde : {{message}}",restore:"Restaurer",restoreReplacesAll:"La restauration remplace toutes les données.",restoreReplacesAllDetail:"Votre base de données et vos fichiers actuels seront complètement remplacés. Un redémarrage est nécessaire après la restauration.",restoreConfirmTitle:"Restaurer la sauvegarde",restoreConfirmMessage:`Êtes-vous sûr de vouloir restaurer depuis "{{filename}}" ? Cela remplacera complètement votre base de données et tous vos fichiers. L'application devra être redémarrée après la restauration.`,restoreConfirmButton:"Restaurer la sauvegarde",uploadingFile:"Téléchargement du fichier de sauvegarde...",backupRestoredRestart:"Sauvegarde restaurée. Veuillez redémarrer Bambuddy.",failedToRestore:"Échec de la restauration. Veuillez vérifier le format du fichier.",reloadNow:"Recharger maintenant",creatingBackup:"Création de la sauvegarde",restoringBackup:"Restauration de la sauvegarde",preparing:"Préparation...",processing:"Traitement...",doNotClosePage:"Veuillez ne pas fermer cette page ni naviguer ailleurs. Cette opération peut prendre plusieurs minutes pour les sauvegardes volumineuses.",restoring:"Restauration...",restoreComplete:"Restauration terminée",restoreFailed2:"Échec de la restauration",importSettings:"Importer les paramètres depuis un fichier de sauvegarde",pleaseWaitRestoring:"Veuillez patienter pendant la restauration de vos données",selectBackupFile:"Cliquez pour sélectionner un fichier de sauvegarde (.json ou .zip)",duplicateHandling:"Comment fonctionne la gestion des doublons :",matchPrinters:"Imprimantes",matchPrintersBy:"correspondance par numéro de série",matchSmartPlugs:"Prises connectées",matchSmartPlugsBy:"correspondance par adresse IP",matchNotificationProviders:"Fournisseurs de notifications",matchNotificationProvidersBy:"correspondance par nom",matchFilaments:"Filaments",matchFilamentsBy:"correspondance par nom + type + marque",matchArchives:"Archives",matchArchivesBy:"correspondance par hash de contenu (toujours ignoré)",matchPendingUploads:"Téléchargements en attente",matchPendingUploadsBy:"correspondance par nom de fichier",matchSettingsTemplates:"Paramètres et modèles",matchSettingsTemplatesBy:"toujours écrasés",replaceExisting:"Remplacer les données existantes",keepExisting:"Conserver les données existantes",overwriteDescription:"Écraser les éléments qui existent déjà avec les données de sauvegarde",keepDescription:"Restaurer uniquement les éléments qui n'existent pas encore",overwriteCaution:"Attention :",overwriteWarning:"L'écrasement remplacera vos configurations actuelles par les données de la sauvegarde. Les codes d'accès des imprimantes ne sont jamais écrasés pour des raisons de sécurité.",cancel:"Annuler",processingBackup:"Traitement du fichier de sauvegarde...",itemsRestored:"Éléments restaurés",itemsSkipped:"Éléments ignorés",restored:"Restaurés",skippedAlreadyExist:"Ignorés (existent déjà)",filesCategory:"Fichiers (3MF, miniatures, etc.)",andMore:"...et {{count}} de plus",newApiKeysGenerated:"Nouvelles clés API générées",keysShownOnce:"Ces clés ne sont affichées qu'une seule fois. Copiez-les maintenant !",copy:"Copier",noDataFound:"Aucune donnée à restaurer n'a été trouvée dans le fichier de sauvegarde.",close:"Fermer",scheduledBackup:"Sauvegardes planifiées",scheduledBackupDescription:"Crée automatiquement des instantanés de sauvegarde selon un planning. Le répertoire de sortie peut être monté sur un NAS ou un stockage externe.",frequency:"Fréquence",backupTime:"Temps",retention:"Rétention",retentionDescription:"Nombre de sauvegardes à conserver",outputPath:"Chemin de sortie",outputPathPlaceholder:"Par défaut : {{path}}",outputPathDescription:"Laisser vide pour l'emplacement par défaut",runNow:"Exécuter maintenant",backupFiles:"Fichiers de sauvegarde",noScheduledBackups:"Aucune sauvegarde",deleteBackup:"Supprimer",deleteBackupConfirm:"Supprimer ce fichier de sauvegarde ?",backupRunning:"Sauvegarde en cours...",scheduledBackupComplete:"Sauvegarde terminée avec succès",scheduledBackupFailed:"Échec de la sauvegarde",nextBackup:"Prochaine sauvegarde",backupSize:"Taille",localTimeHint:"Heure locale ({{tz}})",defaultPathLabel:"Par défaut :",categories:{settings:"Paramètres",notification_providers:"Fournisseurs de notifications",notification_templates:"Modèles de notifications",smart_plugs:"Prises connectées",printers:"Imprimantes",filaments:"Filaments",maintenance_types:"Types de maintenance",archives:"Archives",projects:"Projets",pending_uploads:"Téléchargements en attente",external_links:"Liens externes",api_keys:"Clés API"}},tags:{title:"Étiquettes",addTag:"Ajouter Tag",editTag:"Modifier Tag",deleteTag:"Supprimer Tag",tagName:"Nom du Tag",tagColor:"Couleur du Tag",noTags:"Aucun tag",deleteConfirm:"Supprimer ce tag ?",manageTags:"Gérer les Tags"},uploadModal:{title:"Téléverser des fichiers 3MF",dragDrop:"Glissez les fichiers .3mf ici",or:"ou",browseFiles:"Parcourir",extractionInfo:"Le modèle d'imprimante est extrait des métadonnées 3MF.",uploaded:"téléversé",failed:"échoué",uploading:"En cours...",upload:"Téléverser",uploadFailed:"Échec du téléversement"},editArchive:{title:"Modifier l'archive",name:"Nom",namePlaceholder:"Nom de l'impression",printer:"Imprimante",noPrinter:"Aucune imprimante",project:"Projet",noProject:"Aucun projet",itemsPrinted:"Nombre de pièces",itemsPrintedHelp:"Nombre d'objets produits",notes:"Notes",notesPlaceholder:"Notes sur l'impression...",externalLink:"Lien externe",externalLinkPlaceholder:"https://...",externalLinkHelp:"Lien vers Printables, Thingiverse, etc.",tags:"Étiquettes",tagsPlaceholder:"Ajouter des tags...",addMoreTags:"Plus de tags...",matchingTags:'Correspondant à "{{query}}"',existingTags:"Tags existants",clickToAdd:"(cliquer pour ajouter)",status:"Statut",failureReason:"Raison de l'échec",selectReason:"Choisir raison...",photos:"Photos du résultat",photosHelp:"Cliquez sur + pour ajouter des photos",printResult:"Résultat d'impression",saving:"Enregistrement...",failureReasons:{adhesionFailure:"Défaut d'adhésion",spaghettiDetached:"Spaghetti / Détaché",layerShift:"Décalage de couche",cloggedNozzle:"Buse bouchée",filamentRunout:"Filament fini",warping:"Warping (Déformation)",stringing:"Stringing (Cheveux d'ange)",underExtrusion:"Sous-extrusion",powerFailure:"Coupure courant",userCancelled:"Annulé par l'utilisateur",other:"Autre"},statuses:{completed:"Réussie",failed:"Échouée",aborted:"Annulée",printing:"Impression"}},kProfiles:{title:"Profils K",noPrintersConfigured:"Aucune imprimante configurée",addPrinterInSettings:"Ajoutez une imprimante pour gérer les K-profiles",noActivePrinters:"Aucune imprimante active",enablePrinterConnection:"Activez la connexion pour voir les K-profiles",loadingProfiles:"Chargement des K-Profiles...",printerOffline:"Imprimante hors ligne",printerOfflineDesc:"L'imprimante doit être allumée.",noMatchingProfiles:"Aucun profil correspondant",noMatchingProfilesDesc:"Ajustez votre recherche",noKProfiles:"Aucun K-Profile",noKProfilesDesc:"Aucun profil trouvé pour une buse de {{diameter}}mm",createFirstProfile:"Créer le premier profil",printer:"Imprimante",nozzle:"Buse",refresh:"Rafraîchir",addProfile:"Ajouter Profil",export:"Exporter",import:"Importer",select:"Choisir",selectAll:"Tout sélectionner",delete:"Supprimer",searchPlaceholder:"Nom ou filament...",allExtruders:"Tous les extrudeurs",leftOnly:"Gauche uniquement",rightOnly:"Droite uniquement",allFlow:"Tout débit",hfOnly:"HF uniquement",sOnly:"S uniquement",sortName:"Tri : Nom",sortKValue:"Tri : Valeur K",sortFilament:"Tri : Filament",leftExtruder:"Extrudeur gauche",rightExtruder:"Extrudeur droit",modal:{addTitle:"Ajouter K-Profile",editTitle:"Modifier K-Profile",profileName:"Nom du profil",profileNamePlaceholder:"ex: Mon profil PLA",kValue:"Valeur K",kValuePlaceholder:"0.020",kValueHelp:"Plage type : 0.01-0.06 (PLA), 0.02-0.10 (PETG)",filament:"Filament",selectFilament:"Choisir filament...",noFilamentsHelp:"Créez d'abord un profil dans Bambu Studio.",flowType:"Type de débit",highFlow:"Haut Débit (HF)",standard:"Standard",nozzleSize:"Taille buse",extruder:"Extrudeur",extruders:"Extrudeurs",left:"Gauche",right:"Droite",notes:"Notes (locales)",notesPlaceholder:"Notes sur ce profil...",notesHelp:"Enregistré dans Bambuddy, pas sur l'imprimante",syncing:"Sync avec l'imprimante...",savingExtruder:"Sauvegarde extrudeur {{current}}/{{total}}...",pleaseWait:"Patientez..."},deleteConfirm:{title:"Supprimer profil",cannotUndo:"Action irréversible",message:`Supprimer "{{name}}" de l'imprimante ?`},bulkDelete:{title:"Supprimer les profils",cannotUndo:"Action irréversible",message:"Supprimer les {{count}} profils de l'imprimante ?"},toast:{profileSaved:"Profil K enregistré",profilesSaved:"Profil K enregistré sur {{count}} extrudeur(s)",selectAtLeastOneExtruder:"Sélectionnez un extrudeur",profileDeleted:"Profil K supprimé",profilesDeleted:"{{count}} profils supprimés",exportedProfiles:"{{count}} profils exportés",importedProfiles:"{{count}} sur {{total}} profils importés",noProfilesToExport:"Rien à exporter",invalidFileFormat:"Format invalide",failedToParseImport:"Échec analyse fichier",failedToSaveBatch:"Échec enregistrement groupé",noteSaved:"Note enregistrée",failedToSaveNote:"Échec note"},permission:{noRead:"Pas d'autorisation lecture",noCreate:"Pas d'autorisation création",noUpdate:"Pas d'autorisation mise à jour",noDelete:"Pas d'autorisation suppression",noExport:"Pas d'autorisation export",noImport:"Pas d'autorisation import"}},virtualPrinter:{title:"Imprimante Virtuelle",running:"En cours",stopped:"Arrêtée",description:{default:"Active une imprimante qui apparaît dans Bambu Studio. Les fichiers envoyés sont archivés sans impression.",proxy:"Active un proxy qui relaie le trafic vers une imprimante réelle, permettant l'impression à distance."},enable:{title:"Activer l'imprimante virtuelle",visibleInSlicer:'Visible comme "Bambuddy" dans le Slicer',proxyingTo:"Proxy vers {{name}}",notActive:"Inactive"},model:{title:"Modèle d'imprimante",description:"Choisissez le modèle à émuler.",restartWarning:"Changer le modèle redémarrera le service"},accessCode:{title:"Code d'accès",isSet:"Code défini",notSet:"Code requis pour activer",placeholder:"Code 8 char",placeholderChange:"Entrez nouveau code",hint:"Exactement 8 caractères. Sert à l'auth du Slicer.",charCount:"({{count}}/8)"},targetPrinter:{title:"Imprimante cible",configured:"Cible configurée",notConfigured:"Imprimante requise pour mode Proxy",placeholder:"Choisir imprimante...",hint:"L'imprimante doit être en mode LAN.",noPrinters:"Ajoutez une imprimante réelle d'abord."},remoteInterface:{title:"Exception Interface Réseau",configured:"Override actif",optional:"Optionnel - si IP auto est fausse (VPN, Docker, multi-NIC).",placeholder:"Auto (défaut)...",hint:"Force l'IP annoncée via SSDP."},mode:{title:"Mode",archive:"Archiver",archiveDesc:"Archive immédiatement",review:"Revue",reviewDesc:"Attendre revue avant archive",queue:"File",queueDesc:"Archiver et ajouter à la file",proxy:"Proxy",proxyDesc:"Relais vers imprimante réelle"},autoDispatch:{title:"Lancement automatique",description:"Lancer automatiquement les impressions ajoutées à la file. Désactivé, les impressions attendent un lancement manuel."},queueForceColorMatch:{title:"Forcer la correspondance des couleurs",description:"Refuser l'envoi vers une imprimante qui n'a pas exactement le type de filament et la couleur chargés. Désactivé par défaut — sans cela, la file d'attente utilise uniquement la correspondance par modèle et peut choisir une imprimante avec la mauvaise couleur."},tailscaleDisabled:{title:"Intégration Tailscale",description:"Activez pour marquer ce VP comme exposé via Tailscale. Affiche l'adresse Tailscale de l'hôte pour que vous sachiez quelle IP coller dans le slicer. L'étape d'import CA est inchangée — cette bascule n'a aucun effet sur les certificats."},setupRequired:{title:"Configuration requise",description:"Nécessite des réglages système (ports, pare-feu).",readGuide:"Lire le guide de configuration"},howItWorks:{title:"Fonctionnement",step1:"Sur le même LAN, les imprimantes virtuelles apparaissent automatiquement dans votre slicer (Bambu Studio / OrcaSlicer). Depuis d'autres réseaux, ajoutez-les manuellement par adresse IP et code d'accès.",step2:`En mode Archive, Revue et File d'attente, utilisez le bouton "Envoyer" dans votre slicer pour envoyer des fichiers 3MF à Bambuddy. Le slicer affichera "Impression réussie" — le fichier est stocké, pas imprimé.`,step3:"En mode Proxy, l'imprimante virtuelle relaie tout le trafic vers une vraie imprimante — les impressions démarrent immédiatement comme en connexion directe."},status:{title:"Détails du statut",printerName:"Nom",model:"Modèle",serialNumber:"Série",mode:"Mode",pendingFiles:"Fichiers en attente",targetPrinter:"Cible",ftpPort:"Port FTP",mqttPort:"Port MQTT",ftpConnections:"Connexions FTP",mqttConnections:"Connexions MQTT"},toast:{updated:"Réglages virtuels mis à jour",failedToUpdate:"Échec mise à jour",copyFailed:"Échec de la copie — veuillez sélectionner le texte manuellement",accessCodeRequired:"Code d'accès requis",targetPrinterRequired:"Imprimante cible requise",bindIpRequired:"Veuillez d'abord définir une adresse IP",accessCodeEmpty:"Le code ne peut pas être vide",accessCodeLength:"Le code doit faire 8 caractères",created:"Imprimante virtuelle créée",failedToCreate:"Échec de la création de l'imprimante virtuelle",deleted:"Imprimante virtuelle supprimée",failedToDelete:"Échec de la suppression de l'imprimante virtuelle"},list:{title:"Imprimantes virtuelles",add:"Ajouter",addFirst:"Ajouter une imprimante virtuelle",empty:"Aucune imprimante virtuelle configurée. Ajoutez-en une pour commencer."},bindIp:{title:"Interface réseau",placeholder:"Sélectionner interface...",hint:"Interface réseau sur laquelle cette imprimante virtuelle écoute. Doit être unique par imprimante."},proxy:{accessCodeHint:"En mode proxy, utilisez le code d'accès de l'imprimante cible dans le slicer. La connexion est transmise de manière transparente à l'imprimante réelle."},addDialog:{title:"Ajouter une imprimante virtuelle",name:"Nom",hint:"Vous pourrez configurer le code d'accès, l'imprimante cible et d'autres paramètres après la création.",create:"Créer"},deleteConfirm:{title:"Supprimer l'imprimante virtuelle",message:'Êtes-vous sûr de vouloir supprimer "{{name}}" ? Cela arrêtera tous les services de cette imprimante.'},archiveNameSource:{title:"Source du nom d'archive",description:`Choisissez comment les nouvelles archives sont nommées lorsque les fichiers arrivent via l'imprimante virtuelle. "Métadonnées" utilise le titre intégré par le slicer dans le 3MF (par défaut). "Nom de fichier" utilise le nom envoyé par Bambu Studio en FTP — pratique si vous avez renommé le job dans la boîte "envoyer à l'imprimante".`,metadata:"Métadonnées",filename:"Nom de fichier"},caCert:{title:"Certificat du slicer",description:"Les imprimantes virtuelles utilisent un certificat TLS signé par l'autorité de certification Bambuddy. Importez ce certificat CA dans le magasin de confiance de votre slicer une seule fois pour qu'il accepte la connexion — plus besoin de le copier depuis la ligne de commande.",copy:"Copier",copied:"Copié",download:"Télécharger",fingerprint:"SHA-256"}},modelViewer:{openInSlicer:"Ouvrir dans le Slicer",tabs:{model:"Modèle 3D",gcode:"Aperçu G-code"},notAvailable:"indisponible",notSliced:"pas découpé",plates:"Plateaux",allPlates:"Tous les plateaux",plateNumber:"Plateau {{number}}",plateCount:"{{count}} plateau",plateCount_other:"{{count}} plateaux",objectCount:"{{count}} objet",objectCount_other:"{{count}} objets",filamentCount:"{{count}} filament",filamentCount_other:"{{count}} filaments",eta:"Fin {{minutes}} min",noPreview:"Aucun aperçu pour ce fichier",pagination:{pageOf:"Page {{current}} sur {{total}}",prev:"Préc",next:"Suiv"},errors:{failedToLoad:"Échec chargement fichier",noMeshes:"Aucun maillage trouvé dans le 3MF",unsupportedFormat:"Format non supporté"}},maintenanceDescriptions:{lubricateCarbonRods:"Appliquer du lubrifiant sur les tiges carbone pour un mouvement fluide",lubricateRails:"Appliquer du lubrifiant sur les rails linéaires",cleanNozzle:"Nettoyer buse et hotend anti-bouchage",checkBelts:"Tension des courroies pour la précision",cleanBuildPlate:"Nettoyage plateau pour l'adhésion",checkExtruder:"Usure des engrenages de l'extrudeur",checkCooling:"Bon fonctionnement des ventilateurs",generalInspection:"Inspection générale de la machine",cleanCarbonRods:"Nettoyer les tiges carbone (friction)",lubricateSteelRods:"Appliquer du lubrifiant sur les tiges en acier pour un mouvement fluide",cleanSteelRods:"Nettoyer les tiges en acier (friction)",cleanLinearRails:"Essuyer les rails linéaires (poussière/débris)",checkPtfeTube:"Usure ou dommage du tube PTFE",replaceHepaFilter:"Filtre HEPA pour la qualité de l'air",replaceCarbonFilter:"Filtre charbon actif (odeurs)",lubricateLeftNozzleRail:"Lubrifier le rail de buse gauche (Série H2)"},smartPlugs:{offline:"Hors ligne",admin:"Administrateur",openPlugAdminPage:"Page admin de la prise",deleteSmartPlug:"Supprimer la prise",turnOnSmartPlug:"Allumer la prise",turnOffSmartPlug:"Éteindre la prise",turnOn:"Allumer",turnOff:"Éteindre",addSmartPlug:{scanningNetwork:"Scan réseau...",chooseEntity:"Choisir une entité...",connectionFailed:"Échec connexion",searchEntities:"Chercher entités...",searchPowerSensors:"Capteurs puissance...",searchEnergySensors:"Capteurs énergie...",placeholders:{plugName:"Prise Salon",mqttStateOnValue:"ON, true, 1",mqttSameAsPower:"Identique au topic puissance, ou différent"}},linkedTo:"Lié à :",monitorOnly:"Surveillance uniquement",alerts:"Alertes",scheduleOn:"À {{time}}",scheduleOff:"Désactivé {{time}}",on:"On",off:"Désactivé",power:"Puissance",kwhToday:"kWh Aujourd'hui",settings:"Paramètres",automationSettings:"Paramètres d'automatisation",showInSwitchbar:"Afficher dans la barre de commutateurs",quickAccessSidebar:"Accès rapide depuis la barre latérale",enabled:"Activé",enableAutomation:"Activer l'automatisation pour cette prise",autoOn:"Auto Activé",autoOnDescription:"Allumer au démarrage de l'impression",autoOff:"Auto Désactivé",autoOffDescription:"Éteindre à la fin de l'impression (unique)",autoOffPersistent:"Garder activé",autoOffPersistentDescription:"Rester activé entre les impressions au lieu d'une seule fois",autoOffAfterDrying:"Arrêt auto après séchage",autoOffAfterDryingDescription:"Éteindre à la fin du séchage de l'AMS",delayAfterDryingMinutes:"Délai après séchage (minutes)",turnOffDelayMode:"Mode de délai d'extinction",time:"Temps",temp:"Temp.",delayMinutes:"Délai (minutes)",tempThreshold:"Seuil de température (°C)",tempThresholdDescription:"S'éteint lorsque la buse refroidit en dessous de cette température",edit:"Modifier",deleteConfirm:'Êtes-vous sûr de vouloir supprimer "{{name}}" ? Cette action est irréversible.',turnOnConfirm:'Êtes-vous sûr de vouloir allumer "{{name}}" ?',turnOffConfirm:`Êtes-vous sûr de vouloir éteindre "{{name}}" ? Cela coupera l'alimentation de l'appareil connecté.`,failedToTurn:'Impossible de {{action}} "{{name}}"',unknown:"Inconnu",addTitle:"Ajouter une prise connectée",editTitle:"Modifier la prise connectée",stopScanning:"Arrêter le scan",discoverTasmota:"Découvrir les appareils Tasmota",foundDevices:"{{count}} appareil(s) trouvé(s) - cliquez pour sélectionner :",noDevicesFound:"Aucun appareil Tasmota trouvé sur votre réseau",haNotConfigured:"Home Assistant n'est pas configuré. Configurez-le dans",haSettingsPath:"Paramètres → Réseau → Home Assistant",selectEntity:"Sélectionner l'entité *",ipAddress:"Adresse IP *",nameLabel:"Nom *",username:"Nom d'utilisateur",password:"Mot de passe",authHint:"Laissez vide si votre appareil Tasmota ne nécessite pas d'authentification",linkToPrinter:"Lier à l'imprimante",noPrinter:"Pas d'imprimante (contrôle manuel uniquement)",linkingDescription:"La liaison permet l'allumage/extinction automatique au début/fin de l'impression",powerAlerts:"Alertes de puissance",alertAbove:"Alerte si au-dessus (W)",alertBelow:"Alerte si en dessous (W)",alertDescription:"Recevoir une notification lorsque la consommation dépasse ces seuils. Laisser vide pour désactiver cette direction.",dailySchedule:"Planification quotidienne",turnOnAt:"Allumer à",turnOffAt:"Éteindre à",scheduleDescription:"Allumer/éteindre automatiquement la prise à ces heures chaque jour. Laisser vide pour ignorer cette action.",showOnPrinterCard:"Afficher sur la carte imprimante",displayOnPrinterCard:"Afficher le bouton sur la carte imprimante",connectedResult:"Connecté !",deviceLabel:"Appareil : {{name}} - ",stateLabel:"État : {{state}}",test:"Tester",delete:"Supprimer",save:"Enregistrer",add:"Ajouter",cancel:"Annuler",failedToStartScan:"Impossible de démarrer le scan",nameRequired:"Le nom est requis",entityRequired:"L'entité est requise pour les prises Home Assistant",mqttTopicRequired:"Au moins un topic MQTT doit être configuré pour la puissance, l'énergie ou la surveillance d'état",loadingEntities:"Chargement des entités...",loading:"Chargement...",failedToLoadEntities:"Échec du chargement des entités : {{error}}",noEntitiesMatching:'Aucune entité trouvée correspondant à "{{search}}"',noEntitiesAvailable:"Aucune entité disponible",searchingEntities:"Recherche de toutes les entités ({{count}} trouvées)",showingEntities:"Affichage switch, light, input_boolean ({{count}} disponibles)",energyMonitoringOptional:"Surveillance énergétique (Optionnel)",energyMonitoringHint:"Recherchez et sélectionnez les capteurs fournissant des données de puissance/énergie.",powerSensorW:"Capteur de puissance (W)",energyTodayKwh:"Énergie aujourd'hui (kWh)",totalEnergyKwh:"Énergie totale (kWh)",noMatchingSensors:"Aucun capteur correspondant",none:"Aucun",mqttNotConfigured:"Broker MQTT non configuré. Définissez l'adresse du broker dans",mqttSettingsPath:"Paramètres → Réseau → Publication MQTT",mqttNotConfiguredSuffix:"(vous n'avez pas besoin d'activer la publication, remplissez simplement les détails du broker).",mqttMonitorOnlyDescription:"Les prises MQTT reçoivent les données de puissance/énergie via un abonnement MQTT. Le contrôle on/off n'est pas disponible - utilisez votre broker MQTT ou système domotique.",powerMonitoring:"Surveillance de puissance",energyMonitoring:"Surveillance énergétique",stateMonitoring:"Surveillance d'état",optional:"optionnel",topic:"Sujet",jsonPath:"Chemin JSON",multiplier:"Multiplicateur",onValue:"Valeur ON",mqttPowerHint:`Le chemin JSON extrait la valeur du payload JSON (ex: "power_l1"). Laisser vide si le topic publie des valeurs numériques brutes.
 Utiliser le multiplicateur 0.001 pour mW→W, 1000 pour kW→W.`,mqttEnergyHint:`Le chemin JSON extrait la valeur du payload JSON. Laisser vide pour les valeurs brutes.
 Utiliser le multiplicateur 0.001 pour Wh→kWh, 1000 pour MWh→kWh.`,mqttStateHint:`Le chemin JSON extrait la valeur du payload JSON. Laisser vide pour les valeurs brutes.
-Valeur ON : la chaîne exacte signifiant "ON". Laisser vide pour la détection auto (ON, true, 1).`,restControl:"Contrôle",restOnUrl:"URL d'activation",restOffUrl:"URL de désactivation",restOnBody:"Corps de requête ON",restOffBody:"Corps de requête OFF",restMethod:"Méthode HTTP",restHeaders:"Custom Headers (JSON)",restStatusUrl:"URL de statut",restStatusPath:"Chemin JSON état",restStatusOnValue:"Valeur ON",restPowerUrl:"URL de puissance",restPowerPath:"Chemin JSON puissance",restPowerMultiplier:"Multiplicateur de puissance",restEnergyUrl:"URL d'énergie",restEnergyPath:"Chemin JSON énergie",restEnergyMultiplier:"Multiplicateur d'énergie",restUrlRequired:"Au moins une URL (ON ou OFF) est requise pour les prises REST",restHeadersHint:'par ex. {"Authorization": "Bearer your-token"}',restBodyHint:'par ex. ON, {"state": "on"}',restStatusHint:"URL pour interroger l'état actuel",restPathHint:"par ex. state ou data.power.status",restPowerUrlHint:"URL séparée pour les données de puissance (utilise l'URL de statut si vide)",restEnergyUrlHint:"URL séparée pour les données d'énergie (utilise l'URL de statut si vide)",restEnergyHint:"Chaque valeur peut utiliser sa propre URL ou se rabattre sur l'URL de statut. Utilisez les multiplicateurs pour la conversion d'unités (ex : 0.001 pour convertir Wh en kWh).",testConnection:"Tester la connexion",connectionSuccess:"Connexion réussie",noSwitchesInSwitchbar:"Aucun commutateur dans la barre",enableSwitchbarHint:'Activez "Afficher dans la barre de commutateurs" dans Paramètres > Smart Plugs'},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"E-mail",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"Notifications par e-mail SMTP",telegram:"Notifications via un bot Telegram",discord:"Envoyer vers un canal Discord via webhook",ntfy:"Notifications push gratuites, auto-hébergeables",pushover:"Notifications push simples et fiables",callmebot:"Notifications WhatsApp gratuites via CallMeBot",webhook:"POST HTTP générique vers n'importe quelle URL",homeassistant:"Notifications persistantes dans le tableau de bord Home Assistant"},lastSuccess:"Dernier : {{date}}",error:"Erreur",printer:"Imprimante :",allPrinters:"Toutes les imprimantes",sendTestNotification:"Envoyer une notification de test",eventSettings:"Paramètres des événements",enabled:"Activé",sendFromProvider:"Envoyer des notifications depuis ce fournisseur",printEvents:"Événements d'impression",printerStatus:"État de l'imprimante",amsAlarms:"Alarmes AMS",amsHtAlarms:"Alarmes AMS-HT",printQueue:"File d'attente d'impression",start:"Début",plateCheck:"Vérification du plateau",complete:"Terminé",failed:"Échoué",stopped:"Arrêté",progress:"Progression",offline:"Hors ligne",lowFilament:"Filament bas",maintenance:"Maintenance",amsHumidity:"Humidité AMS",amsTemp:"Temp. AMS",amsHtHumidity:"Humidité AMS-HT",amsHtTemp:"Temp. AMS-HT",bedCooled:"Plateau refroidi",firstLayer:"Première couche",quiet:"Silencieux",digest:"Résumé {{time}}",printStarted:"Impression démarrée",plateNotEmpty:"Plateau non vide",plateNotEmptyDescription:"Objets détectés avant l'impression",printCompleted:"Impression terminée",bedCooledLabel:"Plateau refroidi",bedCooledDescription:"Plateau refroidi sous le seuil après l'impression",firstLayerCompleteLabel:"Première couche terminée",firstLayerCompleteDescription:"Notification avec photo après la première couche",missingSpoolAssignmentLabel:"Affectation de bobine manquante",missingSpoolAssignmentDescription:"Notifier quand une impression démarre et que des bacs requis n'ont pas de bobine assignée",printFailed:"Impression échouée",printStopped:"Impression arrêtée",progressMilestones:"Jalons de progression",progressMilestonesDescription:"Notifier à 25 %, 50 %, 75 %",printerOffline:"Imprimante hors ligne",printerError:"Erreur de l'imprimante",lowFilamentLabel:"Filament bas",maintenanceDue:"Maintenance requise",maintenanceDueDescription:"Notifier lorsqu'une maintenance est nécessaire",amsHumidityHigh:"Humidité AMS élevée",amsHumidityHighDescription:"L'humidité de l'AMS standard dépasse le seuil",amsTemperatureHigh:"Température AMS élevée",amsTemperatureHighDescription:"La température de l'AMS standard dépasse le seuil",amsHtHumidityHigh:"Humidité AMS-HT élevée",amsHtHumidityHighDescription:"L'humidité de l'AMS-HT dépasse le seuil",amsHtTemperatureHigh:"Température AMS-HT élevée",amsHtTemperatureHighDescription:"La température de l'AMS-HT dépasse le seuil",inventoryAlerts:"Alertes de stock",stockReorderAlert:"Alerte de réapprovisionnement",stockReorderAlertDescription:"Le SKU a atteint son point de réapprovisionnement",stockBreakAlert:"Alerte de rupture de stock",stockBreakAlertDescription:"Le stock sera épuisé avant l'arrivée du réapprovisionnement",jobAdded:"Tâche ajoutée",jobAddedDescription:"Tâche ajoutée à la file d'attente",jobAssigned:"Tâche assignée",jobAssignedDescription:"Tâche basée sur le modèle assignée à l'imprimante",jobStarted:"Tâche démarrée",jobStartedDescription:"La tâche de la file a commencé l'impression",jobWaiting:"Tâche en attente",jobWaitingDescription:"Tâche en attente de filament ou imprimante",jobSkipped:"Tâche ignorée",jobSkippedDescription:"Tâche ignorée (échec précédent)",jobFailed:"Tâche échouée",jobFailedDescription:"La tâche n'a pas pu démarrer",queueComplete:"File d'attente terminée",queueCompleteDescription:"Toutes les tâches de la file sont terminées",quietHours:"Heures silencieuses",noNotificationsDuring:"Aucune notification pendant ces heures",editProviderToChangeQuietHours:"Modifier le fournisseur pour changer les heures silencieuses",dailyDigest:"Résumé quotidien",batchNotifications:"Regrouper les notifications en un seul résumé quotidien",sendAt:"Envoyer à {{time}}",editProviderToChangeDigestTime:"Modifier le fournisseur pour changer l'heure du résumé",edit:"Modifier",deleteProvider:"Supprimer le fournisseur de notifications",deleteConfirm:"Êtes-vous sûr de vouloir supprimer « {{name}} » ? Cette action est irréversible.",delete:"Supprimer",addTitle:"Ajouter un fournisseur de notifications",editTitle:"Modifier le fournisseur de notifications",nameLabel:"Nom *",namePlaceholder:"Mes notifications",providerTypeLabel:"Type de fournisseur *",configuration:"Configuration",testConfiguration:"Tester la configuration",printerFilter:"Filtre d'imprimante",onlyFromPrinter:"Envoyer uniquement les notifications pour les événements de cette imprimante",quietHoursDnd:"Heures silencieuses (Ne pas déranger)",quietStart:"Début",quietEnd:"Fin",dailyDigestLabel:"Résumé quotidien",sendDigestAt:"Envoyer le résumé à",digestCollected:"Les événements seront collectés et envoyés en un seul résumé à cette heure",notificationEvents:"Événements de notification",progressPercent:"(25 %, 50 %, 75 %)",bedCooledAfterPrint:"(après la fin de l'impression)",eventPriority:{sectionTitle:"Priorité ntfy",helpNtfy:"Choisissez une priorité pour chaque événement activé. ntfy l'utilise pour faire remonter les alertes (son, visibilité, comportement push). Les niveaux non définis ici utilisent la valeur par défaut du serveur ntfy.",min:"Min.",low:"Basse",default:"Par défaut",high:"Haute",urgent:"Urgente"},cancel:"Annuler",save:"Enregistrer",add:"Ajouter",nameRequired:"Le nom est requis",fieldRequired:"{{field}} est requis",phoneNumber:"Numéro de téléphone",apiKey:"Clé API",serverUrl:"URL du serveur",topic:"Sujet",authToken:"Jeton d'authentification",userKey:"Clé utilisateur",appToken:"Jeton d'application",priority:"Priorité",botToken:"Jeton du bot",chatId:"ID du chat",smtpServer:"Serveur SMTP",smtpPort:"Port SMTP",security:"Sécurité",authentication:"Authentification",username:"Nom d'utilisateur",password:"Mot de passe",fromEmail:"E-mail expéditeur",toEmail:"E-mail destinataire",webhookUrl:"URL du webhook",payloadFormat:"Format du payload",authorization:"Autorisation",titleFieldName:"Nom du champ titre",messageFieldName:"Nom du champ message",editTemplate:"Modifier le modèle : {{name}}",titleLabel:"Titre",bodyLabel:"Corps",titlePlaceholder:"Titre de la notification...",bodyPlaceholder:"Corps de la notification...",availableVariables:"Variables disponibles",clickToInsert:"Cliquer pour insérer à la position du curseur dans le corps",livePreview:"Aperçu en direct",hide:"Masquer",show:"Afficher",loadingPreview:"Chargement de l'aperçu...",enterTemplateContent:"Saisir le contenu du modèle pour voir l'aperçu",titlePreview:"Titre :",bodyPreview:"Corps :",resetToDefault:"Réinitialiser par défaut",titleRequired:"Le titre est requis",bodyRequired:"Le corps est requis",notificationLog:"Journal des notifications",showFailedOnly:"Échecs uniquement",last24Hours:"Dernières 24 heures",last7Days:"7 derniers jours",last30Days:"30 derniers jours",last90Days:"90 derniers jours",justNow:"À l'instant",noFailedNotifications:"Aucune notification échouée",noNotificationsLogged:"Aucune notification enregistrée",unknownProvider:"Fournisseur inconnu",logTitle:"Titre",logMessage:"Message",logError:"Erreur",logProvider:"Fournisseur : {{type}}",logTime:"Heure : {{time}}",refresh:"Actualiser",clearOld:"Purger les anciens",statsSummary:"{{days}} derniers jours :",statsNotifications:"notifications",statsSent:"{{count}} envoyées",statsFailed:"{{count}} échouées",eventTypes:{print_start:"Impression démarrée",print_complete:"Impression terminée",print_failed:"Impression échouée",print_stopped:"Impression arrêtée",print_progress:"Progression",printer_offline:"Imprimante hors ligne",printer_error:"Erreur de l'imprimante",filament_low:"Filament bas",maintenance_due:"Maintenance requise",test:"Tester"},userEmail:{title:"Notifications",emailNotifications:"Notifications par e-mail",emailNotificationsDesc:"Recevez des notifications par e-mail pour vos propres travaux d'impression. Les e-mails sont envoyés via les paramètres SMTP configurés dans l'authentification avancée.",sendingTo:"Les notifications seront envoyées à",noEmailWarning:"Votre compte n'a pas d'adresse e-mail. Contactez un administrateur pour en ajouter une.",printJobNotifications:"Notifications de travaux d'impression",printJobNotificationsDesc:"Choisissez quels événements déclenchent des notifications par e-mail pour les travaux d'impression que vous soumettez.",printJobStarts:"Démarrage du travail d'impression",printJobStartsDesc:"Être notifié quand votre travail d'impression commence.",printJobFinishes:"Fin du travail d'impression",printJobFinishesDesc:"Être notifié quand votre travail d'impression se termine avec succès.",printErrors:"Erreurs d'impression",printErrorsDesc:"Être notifié quand votre travail d'impression échoue ou rencontre une erreur.",printJobStops:"Travail d'impression arrêté",printJobStopsDesc:"Être notifié quand votre travail d'impression est annulé ou arrêté.",saveSuccess:"Préférences de notification sauvegardées.",saveError:"Impossible de sauvegarder les préférences de notification."}},richTextEditor:{bold:"Gras",italic:"Italique",underline:"Souligné",bulletList:"Liste à puces",numberedList:"Liste numérotée",alignLeft:"Aligner à gauche",alignCenter:"Centrer",alignRight:"Aligner à droite",addLink:"Ajouter lien",removeLink:"Retirer lien"},externalLinks:{noLinksConfigured:"Aucun lien externe configuré",deleteLink:"Supprimer lien",removeCustomIcon:"Retirer icône personnalisée",openInNewTab:"Ouvrir dans un nouvel onglet",placeholders:{linkName:"Mon Lien"}},keyboardShortcuts:{title:"Raccourcis Clavier",navigation:"Navigation",archivesSection:"Archives",kProfilesSection:"Profils K",generalSection:"Général",shortcuts:{goToPrinters:"Aller aux Imprimantes",goToArchives:"Aller aux Archives",goToQueue:"Aller à la File",goToStats:"Aller aux Stats",goToProfiles:"Aller aux Profils Cloud",goToSettings:"Aller aux Paramètres",focusSearch:"Focus recherche",openUploadModal:"Ouvrir téléversement",clearSelection:"Tout déselectionner",contextMenu:"Menu contextuel (cartes)",refreshProfiles:"Rafraîchir profils",newProfile:"Nouveau profil",exitSelectionMode:"Quitter mode sélection",showHelp:"Afficher cette aide"},footer:"Échap ou clic extérieur pour fermer"},notificationLog:{title:"Journal de Notification",events:{printStarted:"Début impression",printComplete:"Fin impression",printFailed:"Échec impression",printStopped:"Arrêt impression",progress:"Progression",printerOffline:"Hors ligne",printerError:"Erreur",lowFilament:"Filament bas",maintenanceDue:"Maintenance",test:"Tester"},timeAgo:{justNow:"À l'instant",minutesAgo:"Il y a {{minutes}}m",hoursAgo:"Il y a {{hours}}h"}},restoreBackup:{title:"Restaurer Sauvegarde",restoring:"Restauration...",restoreComplete:"Restauration terminée",restoreFailed:"Échec restauration",importSettings:"Importer les réglages d'un fichier",pleaseWait:"Patientez pendant la restauration",clickToSelect:"Fichier .json ou .zip",howDuplicateHandling:"Gestion des doublons :",categories:{printers:"Imprimantes",smartPlugs:"Prises",notificationProviders:"Fournisseurs",filaments:"Filaments",archives:"Archives",pendingUploads:"Téléversements en attente",settingsTemplates:"Réglages & Modèles"},matchingInfo:{printers:"par numéro de série",smartPlugs:"par adresse IP",notificationProviders:"par nom",filaments:"par nom+type+marque",archives:"par empreinte numérique (hash)",pendingUploads:"par nom de fichier",settingsTemplates:"toujours écrasés"},replaceExisting:"Remplacer existant",keepExisting:"Garder existant",replaceDescription:"Écrase les doublons avec la sauvegarde",keepDescription:"Ne restaure que les éléments absents",caution:"Attention :",cautionText:"L'écrasement remplacera vos réglages. Les codes d'accès imprimantes sont exclus par sécurité.",itemsRestored:"Éléments restaurés",itemsSkipped:"Éléments ignorés",restored:"Restaurés",skipped:"Ignorés (déjà présents)",filesLabel:"Fichiers (3MF, vignettes, etc.)",newApiKeysGenerated:"Nouvelles clés API générées",newApiKeysWarning:"Copiées maintenant, elles ne seront plus visibles !",processingBackup:"Traitement du fichier...",noDataFound:"Aucune donnée trouvée dans le fichier.",failedToRestore:"Échec restaure. Vérifiez le format."},backupExport:{title:"Exporter Sauvegarde",selectData:"Données à inclure",selectAll:"Tout sélectionner",selectNone:"Ne rien sélectionner",categoryDescriptions:{settings:"Langue, thèmes, préférences",notifications:"ntfy, Pushover, Discord, etc.",templates:"Modèles de messages personnalisés",smartPlugs:"Configuration des prises Tasmota",externalLinks:"Liens externes de la barre latérale",printers:"Infos imprimantes (codes d'accès exclus par défaut)",plateDetection:"Images références des plateaux vides",filaments:"Types et coûts filaments",maintenance:"Plannings de maintenance personnalisés",archives:"Données impressions + fichiers (3MF, vignettes, etc.)",projects:"Projets, BOM, pièces jointes",pendingUploads:"En attente revue virtuelle",apiKeys:"Clés Webhook (nouvelles clés générées à l'import)"},requiresPrinters:"Nécessite sélection des imprimantes",zipFileWarning:"Fichier ZIP créé.",zipFileDescription:"Contient tous les médias. Peut être volumineux.",includeAccessCodes:"Inclure Codes d'accès",includeAccessCodesDescription:"Pour migrer vers une autre machine",includeAccessCodesWarning:"Codes en texte clair. Sécurisez ce fichier !",categoriesSelected:"{{selectedCount}} catégories choisies"},pendingUploads:{placeholders:{notes:"Notes sur l'impression..."},discardUpload:"Rejeter",archiveAllUploads:"Tout archiver",discardAllUploads:"Tout rejeter",archive:"Archiver",timeAgo:{justNow:"À l'instant",minutesAgo:"Il y a {{minutes}}m",hoursAgo:"Il y a {{hours}}h",daysAgo:"Il y a {{days}}j"}},apiBrowser:{placeholders:{requestBody:"Corps JSON...",searchEndpoints:"Chercher endpoints..."}},configureAmsSlot:{title:"Configurer le slot AMS",slotConfigured:"Slot configuré !",configuringSlot:"Configuration du slot :",slotLabel:"{{ams}} – Emplacement {{slot}}",searchPresets:"Chercher presets...",colorPlaceholder:"Nom couleur ou hex (ex: brown, FF8800)",clearCustomColor:"Effacer couleur perso",noCloudPresets:"Profils Cloud absents. Connectez-vous.",noPresetsAvailable:"Aucun preset disponible. Connectez-vous à Bambu Cloud ou importez des profils locaux.",noMatchingPresets:"Aucun profil trouvé.",custom:"Perso",builtin:"Inclus",settingsSentToPrinter:"Réglages envoyés",filamentProfile:"Profil Filament",kProfileLabel:"Profil K (Pressure Advance)",filteringFor:"Filtrage pour : {{material}}",noKProfile:"Pas de profil K (utiliser défaut 0.020)",noMatchingKProfiles:"Aucun profil K trouvé. K=0.020 par défaut sera utilisé.",selectFilamentFirst:"Sélectionnez d'abord un profil filament",kFromCalibration:"K={{value}} de la calibration imprimante",customColorLabel:"Couleur personnalisée (optionnel)",presetColors:"Couleurs {{name}} :",showLessColors:"Moins de couleurs",showMoreColors:"Plus de couleurs",clear:"Effacer",hexLabel:"Hex : #{{hex}}",resetting:"Réinitialisation...",resetSlot:"Réinitialiser le slot",cancel:"Annuler",configuring:"Configuration...",configureSlot:"Configurer le slot"},githubBackup:{title:"Sauvegarde Git",history:"Historique",downloadBackup:"Télécharger",restoreBackup:"Restaurer",noBackupsYet:"Aucune sauvegarde"},emailSettings:{placeholders:{fromName:"Bambuddy"}},tagManagement:{searchTags:"Chercher tags...",renameTag:"Renommer tag",deleteTag:"Supprimer tag"},notificationTemplates:{placeholders:{title:"Titre notification...",body:"Message notification..."}},batchTag:{placeholders:{newTag:"Nouveau tag..."}},photoGallery:{deletePhoto:"Supprimer photo"},filamentHoverCard:{copySpoolUuid:"Copier UUID bobine"},kProfilesView:{hasNote:"A une note",copyProfile:"Copier profil"},layout:{openMenu:"Ouvrir menu",noPermissionSystemInfo:"Pas d'autorisation système"},dashboard:{dragToReorder:"Glisser pour réorganiser",hideWidget:"Masquer widget"},notificationProviderCard:{deleteNotificationProvider:"Supprimer fournisseur"},fileManagerModal:{closeFileManager:"Fermer gestionnaire",sortFiles:"Trier fichiers",goToParentFolder:"Dossier parent",threeView:"Vue 3D"},embeddedCameraViewer:{refreshStream:"Actualiser flux",close:"Fermer",zoomOut:"Zoom -",resetZoom:"Réinitialiser le zoom",zoomIn:"Zoom +",dragToResize:"Glisser pour dimension"},timelapseViewer:{skipBack5s:"-5s",skipForward5s:"+5s"},notificationProviders:{descriptions:{email:"Notifications par email SMTP",telegram:"Via bot Telegram",discord:"Via webhook Discord",ntfy:"Push auto-hébergé (ntfy)",pushover:"Push fiable (Pushover)",callmebot:"WhatsApp gratuit via CallMeBot",webhook:"Requête HTTP POST personnalisée"}},logViewer:{searchPlaceholder:"Message ou nom...",noLogEntries:"Aucune entrée journal"},switchbarPopover:{noSwitchesInSwitchbar:"Aucun interrupteur"},projectPageModal:{placeholders:{title:"Titre",designer:"Designer",license:"Licence",description:"Description...",profileTitle:"Titre du profil",profileDescription:"Description du profil..."}},spoolmanSettings:{},time:{unknown:"-",waiting:"En attente",justNow:"À l'instant",now:"Maintenant",minsAgo:"il y a {{count}}m",inMins:"dans {{count}}m",hoursAgo:"il y a {{count}}h",inHours:"dans {{count}}h",daysAgo:"il y a {{count}}j",inDays:"dans {{count}}j"},spoolbuddy:{nav:{dashboard:"Tableau de bord",ams:"AMS",inventory:"Inventaire",writeTag:"Écrire",settings:"Paramètres"},status:{nfcReady:"NFC prêt",nfcOff:"NFC désactivé",offline:"Hors ligne",online:"En ligne",noPrinters:"Aucune imprimante",deviceOffline:"Appareil hors ligne",waitingConnection:"En attente de connexion...",systemReady:"Système prêt",status:"Statut"},dashboard:{readyToScan:"Prêt à scanner",idleMessage:"Placez une bobine sur la balance pour l'identifier",nfcHint:"Le tag NFC sera lu automatiquement",device:"Appareil",syncWeight:"Sync. poids",weightSynced:"Synchronisé !",unknownTag:"Tag inconnu",newTag:"Nouveau tag détecté",onScale:"sur la balance",linkSpool:"Lier à une bobine",linkTagTitle:"Lier le tag à une bobine",linkTag:"Lier le tag",selectSpool:"Sélectionnez une bobine à lier à ce tag :",noUntagged:"Aucune bobine sans tag trouvée",tagDetected:"Tag détecté",noTag:"Pas de tag",tagId:"Étiquette",grossWeight:"Poids brut",spoolSize:"Taille bobine",close:"Fermer",currentSpool:"Bobine actuelle",plateReady:"Plateau prêt : {{name}}",plateReadyLabel:"Plateaux à libérer",plateClearAction:"Libérer",plateClearedToast:"Plateau marqué comme libéré",plateClearFailed:"Impossible de marquer le plateau comme libéré"},modal:{spoolDetected:"Bobine détectée",assignToAms:"Assigner à l'AMS",syncWeight:"Synchroniser le poids",weightSynced:"Synchronisé !",syncing:"Synchronisation...",newTagDetected:"Nouveau tag détecté",addToInventory:"Ajouter à l'inventaire",assignToAmsTitle:"Assigner à l'AMS",selectSlot:"Sélectionner un emplacement",assign:"Assigner",assigning:"Attribution...",assignSuccess:"Assigné !",assignPendingInsert:"Assigné. Le slot sera configuré lors de l'insertion de la bobine.",assignError:"Échec de l'attribution de la bobine. Veuillez réessayer.",noPrinterSelected:"Sélectionner une imprimante...",noAmsDetected:"Aucun AMS détecté sur cette imprimante",slot:"Emplacement"},weight:{noReading:"Pas de lecture",stable:"Stable",measuring:"Mesure...",tare:"Tarer",calibrate:"Calibrer"},spool:{remaining:"Restant",material:"Matériau",brand:"Marque",color:"Couleur",coreWeight:"Noyau",labelWeight:"Étiquette",scaleWeight:"Balance",netWeight:"Réseau",lastUsed:"Dernière utilisation"},ams:{noData:"Aucun AMS détecté",connectAms:"Connectez un AMS pour voir les slots",noPrinter:"Aucune imprimante sélectionnée",selectPrinter:"Sélectionnez une imprimante dans la barre supérieure",printerDisconnected:"Imprimante déconnectée",humidity:"Humidité",level:"Niveau",active:"Actif",slot:"Emplacement",empty:"Vide"},inventory:{search:"Rechercher des bobines...",empty:"Aucune bobine dans l'inventaire",noResults:"Aucune bobine correspondante",spools:"bobines",addSpool:"Ajouter une bobine"},settings:{tabDevice:"Appareil",tabDisplay:"Affichage",tabScale:"Balance",tabUpdates:"Mises à jour",nfcReader:"Lecteur NFC",type:"Type",connection:"Connexion",notConnected:"N/D",deviceInfo:"Info appareil",hostname:"Hôte",uptime:"Temps de fonctionnement",brightness:"Luminosité",saved:"Enregistré",noBacklight:"Aucun rétroéclairage DSI détecté. Le contrôle de luminosité nécessite un écran DSI.",screenBlank:"Délai d'extinction",screenBlankDesc:"L'écran s'éteint après inactivité. Touchez pour réveiller.",displayNote:"La luminosité est appliquée comme filtre logiciel.",scaleCalibration:"Calibration de la balance",currentWeight:"Poids actuel",tareOffset:"Tare",calFactor:"Facteur",knownWeight:"Poids connu",calStep1:"Retirez tout de la balance et appuyez sur Mettre à zéro.",calStep2:"Placez le poids connu sur la balance.",setZero:"Mettre à zéro",calibrateNow:"Calibrer",calibrated:"Calibré",tareSet:"Commande de tare envoyée. En attente de l'appareil...",tareComplete:"Tare terminée !",tareTimedOut:"Délai de tare dépassé — le daemon SpoolBuddy fonctionne-t-il ?",tareFailed:"Échec de l'envoi de la commande de tare",zeroSet:"Point zéro défini. Placez le poids connu sur la balance.",calibrationDone:"Calibration terminée !",calibrationFailed:"Échec de la calibration",lastCalibrated:"Dernière calibration",stable:"Stable",settling:"Stabilisation...",firmware:"Micrologiciel",scale:"Balance",noDevice:"Aucun appareil SpoolBuddy trouvé",daemonVersion:"Version du daemon",currentVersion:"Actuelle",versionPending:"En attente du daemon...",checking:"Vérification...",checkUpdates:"Vérifier les mises à jour",updateAvailable:"Mise à jour disponible",updateInstructions:"Mise à jour via SSH : exécutez le script d'installation SpoolBuddy.",upToDate:"À jour",includeBeta:"Inclure les versions bêta",systemConfig:"Backend & authentification",backendUrl:"URL du backend Bambuddy",apiToken:"Jeton d'API",apiTokenPlaceholder:"Saisir un jeton d'API",saveConfig:"Enregistrer la configuration",systemQueued:"Configuration mise en file.",systemFieldsRequired:"L'URL du backend est obligatoire.",nfcDiagnostic:"Diagnostic NFC",scaleDiagnostic:"Diagnostic balance",readTagDiagnostic:"Diagnostic lecture de tag",testNfc:"Tester le lecteur",testScale:"Tester la précision",testReadTag:"Lire un tag"},writeTag:{tabExisting:"Bobine existante",tabNew:"Nouvelle bobine",tabReplace:"Remplacer le tag",searchPlaceholder:"Rechercher par matériau, couleur, marque...",noUntaggedSpools:"Aucune bobine sans tag",noTaggedSpools:"Aucune bobine avec tag",selectSpool:"Sélectionnez une bobine, puis placez un NTAG sur le lecteur",placeTag:"Placez un NTAG sur le lecteur",tagReady:"Tag détecté — prêt à écrire",writeTag:"Écrire le tag",replaceTag:"Remplacer le tag",writing:"Écriture du tag...",waiting:"En attente de SpoolBuddy...",writeSuccess:"Tag écrit avec succès !",writeFailed:"Échec de l'écriture",queueFailed:"Impossible de mettre en file la commande d'écriture",tryAgain:"Réessayer",cancel:"Annuler",replaceWarning:"L'ancien tag sera dissocié. Le nouveau tag le remplacera.",deviceOffline:"SpoolBuddy est hors ligne",material:"Matériau",colorName:"Nom de la couleur",color:"Couleur",brand:"Marque",weight:"Poids (g)",createSpool:"Créer la bobine",creating:"Création...",spoolCreated:"Bobine créée ! Prêt à écrire.",createFailed:"Impossible de créer la bobine",incompleteDataWarning:"Tag écrit avec des données Spoolman incomplètes"},quickMenu:{printerPower:"Alimentation imprimante",systemControls:"Système",restartDaemon:"Redémarrer le daemon",restartBrowser:"Redémarrer le navigateur",reboot:"Redémarrer",shutdown:"Éteindre",swipeToClose:"Glisser vers le bas pour fermer",confirmTitle:"Confirmer",confirmShutdown:"Êtes-vous sûr de vouloir éteindre le SpoolBuddy ? Vous aurez besoin d'un accès physique pour le rallumer.",confirmReboot:"Êtes-vous sûr de vouloir redémarrer le SpoolBuddy ?",confirmRestartDaemon:"Redémarrer le daemon SpoolBuddy ? Le NFC et la balance seront temporairement indisponibles.",confirmRestartBrowser:"Redémarrer le navigateur kiosque ? L'écran sera brièvement noir.",confirm:"Confirmer",confirmPlugOn:"Allumer {{name}} ?",confirmPlugOff:"Éteindre {{name}} ?",turnOn:"Allumer",turnOff:"Éteindre"}},diagnostic:{modalTitle:"Diagnostic de connexion — {{name}}",running:"Diagnostic en cours...",runningElapsed:"Diagnostic en cours... ({{elapsed}}s)",waitingForReportHint:"En attente que l'imprimante publie un rapport d'état — cela peut prendre jusqu'à {{max}} secondes.",runFailed:"Le diagnostic n'a pas pu s'exécuter : {{error}}",retry:"Relancer",runButton:"Lancer le diagnostic",sectionTitle:"Diagnostic de connexion",sectionDescription:"Vérifiez pourquoi une imprimante ne se connecte pas ou n'imprime pas — accessibilité des ports, mode développeur LAN, mode réseau Docker et identifiants.",noPrinters:"Aucune imprimante configurée.",overall:{ok:"Aucun problème détecté — la connexion de l'imprimante semble correcte.",warnings:"L'imprimante devrait fonctionner, mais certains points nécessitent votre attention.",problems:"Des problèmes expliquant pourquoi l'imprimante ne se connecte pas ou n'imprime pas ont été détectés."},check:{port_mqtt:{title:"Port de contrôle (MQTT 8883)",pass:"Accessible — l'imprimante accepte les connexions de contrôle.",fail:"Le port 8883 est inaccessible. L'imprimante est éteinte, possède une autre adresse IP, ou un pare-feu la bloque. Vérifiez l'IP de l'imprimante et qu'aucun élément ne bloque le port 8883."},port_ftps:{title:"Port de transfert de fichiers (FTPS 990)",pass:"Accessible — l'envoi de fichiers d'impression fonctionnera.",warn:"Le port 990 est inaccessible. La surveillance peut toujours fonctionner, mais l'envoi d'impressions vers l'imprimante échouera. Assurez-vous que le port 990 n'est pas bloqué."},port_rtsps:{title:"Port caméra (RTSPS 322)",pass:"Accessible — le flux de la caméra fonctionnera.",warn:"Le port 322 est inaccessible. La vue caméra en direct ne fonctionnera pas. Cela n'affecte pas l'impression."},network_mode:{title:"Mode réseau Docker",pass:"Fonctionne en mode réseau host.",warn:`Bambuddy fonctionne en réseau Docker bridge. La découverte d'imprimantes et l'imprimante virtuelle nécessitent le mode réseau host — recréez le conteneur avec "network_mode: host".`,skip:"Ne fonctionne pas dans Docker — non applicable."},subnet:{title:"Sous-réseau",pass:"L'imprimante et Bambuddy sont sur le même sous-réseau.",warn:"L'imprimante ({{printer_ip}}) et Bambuddy ({{host_ip}}) sont sur des sous-réseaux différents. Ils peuvent ne pas se joindre, sauf si un routage entre les sous-réseaux est configuré.",skip:"Le sous-réseau n'a pas pu être déterminé — ignoré."},mqtt_auth:{title:"Identifiants de l'imprimante",pass:"L'imprimante a accepté la connexion.",fail:"L'imprimante est accessible mais a refusé la connexion. Le code d'accès ou le numéro de série est très probablement incorrect. Le code d'accès change chaque fois que le mode développeur est activé/désactivé — recopiez-le depuis l'écran de l'imprimante.",skip:"Non vérifié — l'imprimante n'a pas pu être jointe."},developer_mode:{title:"Mode développeur LAN",pass:"Le mode développeur est activé.",fail:"Le mode développeur est DÉSACTIVÉ sur l'imprimante. Activez-le dans les paramètres LAN de l'imprimante — et confirmez avec OK. Sans lui, les impressions ne démarreront pas.",skip:"Impossible à vérifier — nécessite une connexion active à l'imprimante."},printer_publishing:{title:"L'imprimante publie son état",pass:"L'imprimante publie des mises à jour d'état — l'AMS, les filaments et les profils K seront correctement reflétés dans le slicer.",fail:"Le broker MQTT a accepté la connexion mais l'imprimante n'a publié aucun rapport d'état. Il s'agit presque toujours d'un numéro de série erroné ou mal capitalisé — le topic device/<serial>/report est sensible à la casse. Vérifiez le numéro de série dans les paramètres de l'imprimante par rapport à l'écran de la machine.",skip:"Impossible à vérifier — nécessite une connexion active à l'imprimante."}}},systemHealth:{sectionTitle:"État du système",sectionDescription:"Analyse les journaux récents à la recherche de problèmes connus que vous pouvez généralement résoudre vous-même, avant qu'ils ne deviennent un ticket de support.",rescan:"Relancer l'analyse",clean:"Aucun problème connu trouvé dans les {{times}} dernières entrées de journal.",logUnavailable:"La journalisation dans un fichier est désactivée, les journaux ne peuvent donc pas être analysés. Activez la journalisation dans un fichier pour utiliser cette vérification.",learnMore:"Comment corriger",fixLabel:"Correctif :",occurrences:"Vu {{times}}× — dernière fois à {{lastSeen}}",category:{layer8:"Vous pouvez corriger ceci",environment:"Environnement",bug:"Merci de le signaler"},signature:{"ftp-auth-rejected":{name:"L'imprimante a refusé le code d'accès",cause:"L'imprimante a refusé la connexion de transfert de fichiers. Le code d'accès est incorrect, ou il a changé après l'activation du mode développeur.",fix:"Recopiez le code d'accès depuis l'écran de l'imprimante (paramètres LAN) et mettez-le à jour dans les paramètres de l'imprimante dans Bambuddy."},"ftp-connection-timeout":{name:"Délai de connexion de transfert de fichiers dépassé",cause:"Bambuddy n'a pas pu atteindre le port de transfert de fichiers de l'imprimante (FTPS 990). Le port est bloqué, ou l'imprimante est éteinte ou sur un autre sous-réseau.",fix:"Assurez-vous que rien ne bloque le port 990 entre Bambuddy et l'imprimante, et que les deux sont sur le même réseau."},"ftp-ssl-error":{name:"Échec de la négociation sécurisée du transfert de fichiers",cause:"La négociation TLS avec le serveur de transfert de fichiers de l'imprimante a échoué. C'est souvent dû à un pare-feu ou à un micrologiciel d'imprimante obsolète.",fix:"Mettez à jour le micrologiciel de l'imprimante et vérifiez qu'aucun pare-feu ou proxy n'intercepte la connexion sur le port 990."},"mqtt-connection-flapping":{name:"La connexion à l'imprimante se coupe sans cesse",cause:"La connexion de contrôle (MQTT 8883) se déconnecte et se reconnecte à répétition — généralement à cause d'un réseau faible ou d'un port partiellement bloqué.",fix:"Vérifiez le signal Wi-Fi près de l'imprimante, privilégiez une connexion filaire et assurez-vous que le port 8883 est accessible de façon fiable."},"camera-connection-refused":{name:"Flux de la caméra inaccessible",cause:"La caméra en direct n'a pas pu être atteinte sur le port RTSPS 322. Le port est bloqué, ou la caméra ou la vue en direct par LAN est désactivée sur l'imprimante.",fix:"Activez la caméra et la vue en direct par LAN sur l'imprimante, et assurez-vous que le port 322 n'est pas bloqué. Cela n'affecte pas l'impression."},"database-locked":{name:"Conflits d'écriture dans la base de données",cause:'La base de données SQLite rencontre des erreurs "database is locked" sous charge — fréquent lorsque plusieurs imprimantes sont utilisées en même temps.',fix:"Faites passer Bambuddy à une base de données PostgreSQL externe. Consultez le guide PostgreSQL dans la documentation."}}},vpDiagnostic:{title:"Vérification de configuration — {{name}}",runButton:"Lancer la vérification",running:"Vérification de configuration en cours...",runFailed:"Impossible de lancer la vérification de configuration : {{error}}",retry:"Relancer",overall:{ok:"Toutes les vérifications ont réussi — cette imprimante virtuelle est correctement configurée.",warnings:"L'imprimante virtuelle devrait fonctionner, mais certains points nécessitent votre attention.",problems:"Des problèmes ont été trouvés qui expliquent pourquoi le slicer ne voit pas ou ne peut pas utiliser cette imprimante virtuelle."},check:{enabled:{title:"Imprimante virtuelle activée",fail:"Cette imprimante virtuelle est désactivée. Activez-la pour qu'elle soit détectable."},running:{title:"Services en cours d'exécution",fail:"L'imprimante virtuelle est activée mais ses services ne sont pas en cours d'exécution. Consultez le journal Bambuddy — un conflit d'IP de liaison ou une erreur de permission les arrête généralement."},bind_interface:{title:"Interface réseau de liaison",fail:`L'interface de liaison n'est pas définie ou n'existe plus sur cet hôte. Choisissez une interface actuelle dans la liste "Interface de liaison".`},access_code:{title:"Code d'accès défini",fail:"Aucun code d'accès n'est défini. Le slicer doit recevoir le même code d'accès à 8 caractères que celui que vous définissez ici."},target_printer:{title:"Imprimante cible",fail:"Aucune imprimante cible n'est sélectionnée. Le mode proxy a besoin d'une vraie imprimante vers laquelle transférer.",warn:"L'imprimante cible est hors ligne pour le moment — le transfert reprendra dès qu'elle se reconnectera."},port_ftps:{title:"Service de téléversement de fichiers (port {{port}})",fail:"Rien n'écoute sur le port {{port}} de l'IP de liaison, le slicer ne peut donc pas téléverser de fichiers. La cause habituelle est un conflit de port sur cette interface."},port_mqtt:{title:"Service de contrôle (port {{port}})",fail:"Rien n'écoute sur le port {{port}} de l'IP de liaison, le slicer ne peut donc pas se connecter ni afficher l'état."},port_bind:{title:"Service de détection (port {{port}})",fail:"Rien n'écoute sur le port {{port}} de l'IP de liaison, la poignée de main de détection du slicer échoue donc."},certificate:{title:"Certificat TLS",pass:"Certificat prêt. Assurez-vous que le certificat CA Bambuddy (ci-dessus) est importé dans le magasin de confiance de votre slicer.",fail:"Le certificat TLS de cette imprimante virtuelle est manquant. Vérifiez que le répertoire de données Bambuddy est accessible en écriture."}}},bugReport:{logHealthSummary:"Problèmes connus trouvés dans vos journaux",logHealthIntro:"Les journaux récents correspondent à des problèmes connus. Consultez les correctifs ci-dessous — les résoudre pourrait régler votre problème sans rapport de bogue. Vous pouvez tout de même envoyer un rapport ci-dessous.",title:"Signaler un bug",description:"Description",descriptionPlaceholder:"Qu'est-ce qui n'a pas fonctionné ? Veuillez décrire le problème...",email:"E-mail (optionnel)",emailPlaceholder:"votre@email.fr",emailPrivacy:"Si fourni, votre e-mail sera inclus dans une section repliée de l'issue GitHub pour que le mainteneur puisse vous contacter.",screenshot:"Capture d'écran",uploadOrPaste:"Télécharger, coller ou glisser une image",dataCollectedSummary:"Quelles données sont incluses dans le rapport ?",dataIncluded:"Inclus :",dataIncludedList:"Version de l'app, OS, architecture, version Python, statistiques de base de données (compteurs uniquement), modèles d'imprimantes, nombre de buses, versions firmware, état de connexion, état des intégrations (Spoolman, MQTT, HA), paramètres non sensibles, nombre d'interfaces réseau, détails Docker, versions des dépendances.",dataNeverIncluded:"Jamais inclus :",dataNeverIncludedList:"Noms d'imprimantes, numéros de série, codes d'accès, mots de passe, adresses IP, adresses e-mail, clés API, tokens, URLs de webhook, noms d'hôtes ou noms d'utilisateurs.",submit:"Envoyer",startLogging:"Lancer la journalisation",stepEnableLogging:"Journalisation activée",stepReproduce:"Reproduisez le problème",stepStopLogging:"Arrêter & envoyer",stopAndSubmit:"Arrêter & Envoyer",maxDuration:"Arrêt auto après {{minutes}} min",stoppingLogs:"Collecte des journaux & envoi...",submitting:"Envoi du rapport de bug...",submittingStepConnection:"Vérification de la connectivité des imprimantes",submittingStepVirtualPrinters:"Vérification de la configuration des imprimantes virtuelles",submittingStepLogScan:"Analyse des journaux récents pour les problèmes connus",submittingStepSubmit:"Envoi du rapport vers GitHub",submitSuccess:"Rapport de bug envoyé avec succès !",submitFailed:"Échec de l'envoi du rapport de bug",diagnosticChecking:"Vérification des connexions des imprimantes...",diagnosticHealthy:"Vérification de connexion réussie — aucun problème détecté sur vos imprimantes.",diagnosticSummary:"{{problems}} imprimante(s) sur {{total}} ont des problèmes de connexion",diagnosticIntro:"Une ou plusieurs imprimantes ont un problème de connexion qui pourrait être à l'origine de votre problème. Dépliez une imprimante ci-dessous pour voir la solution — la résoudre pourrait régler le problème sans rapport de bug. Vous pouvez tout de même envoyer un rapport ci-dessous.",thankYou:"Merci !",submitted:"Votre rapport de bug a été soumis.",viewIssue:"Voir l'issue",unexpectedError:"Une erreur inattendue est survenue"},failureDetection:{title:"Détection d'échec par IA",description:"Surveille les impressions via une API ML Obico auto-hébergée et agit automatiquement sur les échecs détectés.",mlUrl:"URL de l'API ML Obico",mlUrlHint:"URL de base de votre conteneur Obico ml_api auto-hébergé (ex. http://192.168.1.10:3333).",test:"Tester",testSuccess:"API ML accessible et fonctionnelle.",testFailed:"Impossible d'atteindre l'API ML.",sensitivity:"Sensibilité",sensitivityLow:"Basse (moins de faux positifs)",sensitivityMedium:"Moyenne (équilibrée)",sensitivityHigh:"Haute (détection précoce, plus de faux positifs)",sensitivityHint:"Ajuste les seuils de confiance qui déclenchent les avertissements et les échecs.",action:"Action sur échec détecté",actionNotify:"Notifier uniquement",actionPause:"Mettre en pause",actionPauseOff:"Pause et couper l'alimentation",pollInterval:"Intervalle de vérification (secondes)",pollIntervalHint:"Fréquence de vérification de chaque imprimante pendant l'impression. Minimum 5s, maximum 120s.",externalUrlMissing:"L'URL externe n'est pas définie.",externalUrlHint:"L'API ML récupère la capture caméra par URL. Définissez l'URL externe dans les paramètres généraux pour que le conteneur API ML puisse atteindre Bambuddy.",perPrinterTitle:"Imprimantes surveillées",perPrinterHint:"Choisissez quelles imprimantes le service de détection surveille.",monitorAll:"Surveiller toutes les imprimantes connectées",statusTitle:"Statut",serviceRunning:"Service en cours d'exécution",thresholds:"Seuils bas / haut",activePrinters:"Impressions actives",noActivePrints:"Aucune impression en cours.",historyTitle:"Détections récentes",noHistory:"Aucune détection pour le moment."},makerworld:{title:"MakerWorld",description:"Collez une URL de modèle MakerWorld pour l'importer et l'imprimer directement depuis Bambuddy — sans passer par l'application Bambu Handy.",pasteUrlHeader:"Importer depuis MakerWorld",pasteUrlPlaceholder:"https://makerworld.com/en/models/… ou collez n'importe quel lien MakerWorld",resolveButton:"Résoudre",signInRequiredTitle:"Connexion Bambu Cloud requise pour télécharger",signInRequiredBody:"Vous pouvez consulter les détails du modèle anonymement, mais MakerWorld nécessite un compte Bambu Cloud pour télécharger les fichiers 3MF.",openCloudSettings:"Ouvrir les paramètres Cloud",untitledModel:"Modèle sans titre",byCreator:"par {{name}}",downloadsCount:"{{count}} téléchargements",licensePrefix:"Licence",alreadyImported:"Déjà dans la bibliothèque",openOnMakerworld:"Ouvrir sur MakerWorld",alreadyInLibrary:"Ce modèle est déjà dans votre bibliothèque — retrouvez-le dans Gestionnaire de fichiers → MakerWorld",importSuccess:"{{filename}} importé — enregistré dans Gestionnaire de fichiers → MakerWorld",platesHeader:"Plateaux ({{count}})",plateDefaultName:"Plateau {{n}}",materialCount:"{{count}} filaments",amsRequired:"AMS requis",slicedFor:"Découpé pour {{printer}}",alsoCompatible:"Également marqué compatible : {{printers}}",importToLibrary:"Enregistrer",sliceIn:"Enregistrer et découper dans {{slicer}}",disclaimer:"L'intégration MakerWorld utilise des points de terminaison API documentés par la communauté. Bambuddy n'est ni affilié ni approuvé par MakerWorld ou Bambu Lab.",lastImportSuccess:"Importé dans votre bibliothèque",lastImportAlreadyInLibrary:"Déjà dans votre bibliothèque",viewInLibrary:"Voir dans le Gestionnaire de fichiers",openInBambuStudio:"Ouvrir dans Bambu Studio",openInOrcaSlicer:"Ouvrir dans OrcaSlicer",importTo:"Importer dans le Gestionnaire de fichiers",recentImportsHeader:"Imports récents",phaseResolving:"Résolution",phaseDownloading:"Téléchargement",folderAuto:"MakerWorld (par défaut)",importAll:"Tout importer",importAllProgress:"Importation de {{current}}/{{total}}",openGallery:"Ouvrir la galerie d'images",galleryPrev:"Image précédente",galleryNext:"Image suivante",deleteImport:"Retirer de la bibliothèque",importDeleting:"Suppression…",importDeleted:"Retiré de la bibliothèque",confirmDelete:"Retirer {{filename}} de la bibliothèque ? Le fichier local est supprimé, mais la plaque peut être ré-importée depuis MakerWorld.",errors:{resolveFailed:"Impossible de résoudre cette URL MakerWorld.",downloadFailed:"Le téléchargement a échoué. Veuillez réessayer.",deleteFailed:"Impossible de retirer le fichier de la bibliothèque."}},gcodeViewer:{back:"Retour",backToArchives:"Retour aux archives d'impression",backToFiles:"Retour au gestionnaire de fichiers"},libraryTrash:{title:"Corbeille",headerButton:"Corbeille",headerTooltip:"Voir les fichiers déplacés dans la corbeille",backToFiles:"Retour au gestionnaire de fichiers",subtitleAdmin:"Les fichiers supprimés restent ici pendant {{days}} jours, puis sont supprimés automatiquement. Cette vue affiche la corbeille de tous les utilisateurs.",subtitleUser:"Les fichiers supprimés restent ici pendant {{days}} jours, puis sont supprimés automatiquement.",loading:"Chargement de la corbeille…",loadError:"Impossible de charger la corbeille.",empty:"La corbeille est vide.",summary:"{{count}} fichiers · {{size}}",emptyTrash:"Vider la corbeille",restore:"Restaurer",purgeNow:"Supprimer maintenant",autoPurgeIn:"Suppression automatique dans {{when}}",days:"jours",retentionLabel:"Supprimer automatiquement après",selectAll:"Tout sélectionner",selectOne:"Sélectionner {{filename}}",selectionCount:"{{count}} sélectionné(s)",bulkRestore:"Restaurer la sélection",bulkPurge:"Supprimer la sélection",col:{filename:"Fichier",folder:"Dossier",size:"Taille",deleted:"Mis à la corbeille",autoPurge:"Suppression auto.",owner:"Propriétaire",actions:"Actions"},confirm:{purgeTitle:"Supprimer définitivement ?",purgeBody:"{{filename}} sera supprimé du disque et ne pourra pas être restauré.",emptyTitle:"Vider la corbeille ?",emptyBody:"Tous les {{count}} fichiers seront supprimés du disque. Cette action est irréversible.",bulkPurgeTitle:"Supprimer définitivement les fichiers sélectionnés ?",bulkPurgeBody:"Les {{count}} fichiers sélectionnés seront supprimés du disque et ne pourront pas être restaurés.",cta:"Supprimer définitivement"},toast:{restored:"Fichier restauré.",restoreFailed:"Impossible de restaurer le fichier.",purged:"Fichier supprimé définitivement.",purgeFailed:"Impossible de supprimer le fichier.",emptied:"{{count}} fichier(s) supprimé(s) de la corbeille.",emptyFailed:"Impossible de vider la corbeille.",retentionSaved:"Suppression automatique réglée sur {{days}} jours.",retentionFailed:"Impossible d'enregistrer le réglage de rétention.",bulkRestored:"{{count}} fichier(s) restauré(s).",bulkPurged:"{{count}} fichier(s) supprimé(s)."}},libraryPurge:{title:"Purger les anciens fichiers",headerButton:"Purger",headerTooltip:"Déplacer en masse les anciens fichiers vers la corbeille",description:"Les fichiers plus anciens que le seuil seront déplacés vers la corbeille. Les dossiers externes sont ignorés. Vous pouvez restaurer depuis la corbeille avant la suppression automatique.",ageLabel:"Déplacer les fichiers plus anciens que",days:"jours",includeNeverPrinted:"Inclure les fichiers jamais imprimés",effectsTitle:"Ce qui se passe lorsque vous cliquez sur Purger",effect1:"Les fichiers correspondants sont déplacés vers la corbeille — pas encore supprimés du disque.",effect2:"Vous pouvez les restaurer depuis la corbeille jusqu'à l'expiration de la fenêtre de rétention.",effect3:"Après la période de rétention, le balayeur de corbeille les supprime définitivement.",effect4:"Les fichiers dans les dossiers externes (liés) sont ignorés — Bambuddy ne supprime jamais d'octets qu'il ne possède pas.",previewLoading:"Vérification du nombre de fichiers concernés…",previewFailed:"Impossible de prévisualiser la purge.",previewSummary:"{{count}} fichiers · {{size}} seraient déplacés vers la corbeille",andMore:"…et {{count}} de plus",warning:"Les fichiers sont supprimés en douceur — vous pouvez les restaurer depuis la corbeille jusqu'à l'expiration de la période de rétention.",confirmCta:"Déplacer {{count}} vers la corbeille",purging:"Déplacement vers la corbeille…",toast:{success:"{{count}} fichier(s) déplacé(s) vers la corbeille.",failed:"Impossible de purger les fichiers."}},libraryAutoPurge:{enableLabel:"Purge automatique des anciens fichiers",enableDescription:"Exécute la purge administrateur une fois par jour. Les fichiers sont d'abord déplacés vers la corbeille — ils ne sont pas supprimés immédiatement.",ageLabel:"Purger automatiquement les fichiers plus anciens que",ageDescription:"Minimum 7 jours, maximum 10 ans. Utilise la même règle d'ancienneté que le bouton Purger manuel.",days:"jours",includeNeverPrinted:"Inclure les fichiers jamais imprimés",saveFailed:"Impossible d'enregistrer les paramètres de purge automatique."},archivePurge:{headerButton:"Purger les anciens",headerTooltip:"Suppression groupée d'anciennes archives",title:"Purger les anciennes archives",description:"Effacer l'ancien historique d'impression. Chaque archive vieillit selon sa dernière impression terminée — réimprimer une archive remet son âge à zéro, donc le travail actif n'est jamais purgé.",ageLabel:"Supprimer les archives non imprimées depuis",days:"jours",effectsTitle:"Ce qui se passe lorsque vous cliquez sur Purger",effect1:"Chaque archive correspondante est masquée des listes et ses fichiers sont retirés du disque (3MF, miniature, timelapse, 3MF source, F3D, photos).",effect2:"La ligne d'archive reste en base pour que les statistiques rapides conservent la contribution en filament, temps, coût et énergie — même comportement que la suppression individuelle par défaut.",effect3:"Cochez « Aussi retirer des statistiques » ci-dessous pour également supprimer la contribution des statistiques rapides (équivalent à l'option de la suppression individuelle). Ce chemin est irréversible.",effect4:"Réimprimer une archive remet son compteur à zéro, les archives actives sont donc protégées.",purgeStatsLabel:"Aussi retirer des statistiques",purgeStatsHint:"Supprime les archives correspondantes des statistiques rapides (filament, temps, coût, énergie). Sans cette option, les statistiques conservent chaque contribution et seuls les fichiers quittent le disque.",previewLoading:"Vérification du nombre d'archives correspondantes…",previewFailed:"Impossible de prévisualiser la purge.",previewSummary:"{{count}} archives · {{size}} seraient retirées",andMore:"…et {{count}} de plus",warning:"Les fichiers sont retirés du disque et ne peuvent pas être restaurés. Téléchargez ou marquez comme favori avant de continuer.",confirmCta:"Retirer {{count}} archive(s)",purging:"Retrait en cours…",toast:{success:"{{count}} archive(s) retirée(s).",failed:"Impossible de purger les archives."}},archiveAutoPurge:{enableLabel:"Purger auto. les anciennes archives",enableDescription:"Une fois par jour, masque des listes les archives non imprimées dans le seuil et retire leurs fichiers du disque. Réimprimer remet le compteur à zéro.",ageLabel:"Suppression auto. des archives non imprimées depuis",ageDescription:"Minimum 7 jours, maximum 10 ans. Basé sur la dernière impression terminée — réimprimer remet l'âge à zéro. Retire 3MF, miniature, timelapse, 3MF source, F3D et photos.",days:"jours",purgeStatsLabel:"Aussi retirer des statistiques",purgeStatsDescription:"Lorsqu'activé, le nettoyage quotidien supprime aussi la contribution de chaque archive purgée des statistiques rapides (filament, temps, coût, énergie). Désactivé par défaut — les statistiques conservent la contribution et seuls les fichiers quittent le disque.",runNow:"Purger les archives maintenant",saveFailed:"Impossible d'enregistrer les paramètres de purge automatique."},cameraTokens:{title:"Jetons API caméra",navTitle:"Jetons API caméra",description:"Jetons longue durée pour intégrer le flux caméra dans Home Assistant, Frigate, kiosques ou tout autre outil nécessitant une URL stable. Chaque jeton est limité au flux caméra et peut être révoqué à tout moment.",loading:"Chargement…",confirmRevoke:{title:"Révoquer ce jeton ?",body:`Tout appareil utilisant "{{name}}" perdra l'accès immédiatement. Action irréversible.`,cancel:"Annuler",confirm:"Révoquer"},create:{title:"Créer un nouveau jeton",nameLabel:"Nom du jeton",namePlaceholder:"par ex. Home Assistant",daysLabel:"Jours avant expiration",submit:"Créer",hint:"Durée de vie maximale 365 jours. La valeur du jeton n'est affichée qu'une seule fois — copiez-la maintenant."},created:{title:"Jeton créé – copiez-le maintenant",warning:"C'est la seule fois où ce jeton sera visible. Après la fermeture de ce dialogue, vous ne pourrez plus jamais le voir.",copy:"Copier",dismiss:"Je l'ai enregistré"},list:{myTitle:"Mes jetons",allTitle:"Tous les utilisateurs (vue admin)",empty:"Aucun jeton pour le moment.",name:"Nom",owner:"Propriétaire",prefix:"Préfixe",created:"Créé",expires:"Expire",lastUsed:"Dernière utilisation",revoke:"Révoquer",expired:"Expiré"},toast:{created:"Jeton créé",createFailed:"Échec de la création du jeton",revoked:"Jeton révoqué",revokeFailed:"Échec de la révocation du jeton",loadFailed:"Échec du chargement des jetons",copied:"Copié dans le presse-papiers",copyFailed:"Échec de la copie – sélectionnez et copiez manuellement"}},forecast:{title:"Prévision des stocks",noSpools:"Aucune bobine active trouvée. Ajoutez des bobines à votre inventaire pour voir les données de prévision.",noUsageData:"Aucune donnée d'utilisation disponible — impossible de projeter la chronologie des stocks.",sku:"SKU",material:"Matériau",stock:"Stock",dailyRate:"Cadence",daysLeft:"Jours restants",emptyBy:"Épuisé le",reorderBy:"Réapprovisionner avant le",actions:"Actions",trend:"Tendance",estimated:"Est.",noData:"Aucune donnée",timeframe:"Période",chartTitle:"Prévision du stock — Top 5 matériaux",dashedLinesROP:"Lignes pointillées = points de réapprovisionnement",stockLevel:"Niveau de stock",reorderPoint:"Point de réapprovisionnement",safetyMargin:"Marge de sécurité",trendLegend:"Tendance (basée sur l'historique, niveau de service 95 %)",estimatedLegend:"Estimée (delta de poids)",noDataLegend:"Aucune donnée",ropLabel:"PR",ssLabel:"SS",safetyStockLegend:"Stock de sécurité",stockArrivalLegend:"Arrivée du stock",stockoutLegend:"Rupture de stock",alertCount_one:"{{count}} alerte",alertCount_other:"{{count}} alertes",order:"Commander",globalLeadTime:"Délai global",globalLeadTimeHint:"Délai global minimum — utilisé dans le calcul du point de réapprovisionnement pour tous les SKUs",save:"Enregistrer",cancel:"Annuler",settingsSaved:"Paramètres enregistrés",failedSaveSettings:"Échec de l'enregistrement des paramètres",globalLeadTimeSaved:"Délai global enregistré",skuLeadTimeOverride:"Délai spécifique au SKU",skuLeadTimeHint:"0 = utiliser le délai global. Définir >0 pour remplacer ce SKU.",safetyMarginLabel:"Marge de sécurité",effectiveLeadTime:"Délai effectif",effectiveLeadTimeHint:"max(global {{global}}j, SKU {{sku}}j)",reorderPointHint:"d̄ × LT + safety margin — commander quand le stock atteint ce niveau",safetyMarginHint:"Stock de sécurité statistique (z=1,65 × σ × √LT) + tampon défini par l'utilisateur",safetyMarginHintDays:"Tampon ajouté par-dessus le stock de sécurité statistique.{{approx}}",safetyMarginHintDaysApprox:" ≈ {{g}}g au taux actuel.",safetyMarginHintG:"Tampon de poids fixe ajouté par-dessus le stock de sécurité statistique.{{approx}}",safetyMarginHintGApprox:" ≈ {{days}}j au taux actuel.",individualSpools:"Bobines individuelles",labelWeight:"Étiquette",spoolCount_one:"{{count}} bobine",spoolCount_other:"{{count}} bobines",stockBreakRisk:"Risque de rupture de stock",stockBreakBefore:"Rupture de stock avant réapprovisionnement",stockBreakDetail:"{{days}}j restants, délai {{lt}}j.",reorderNow:"Réapprovisionner maintenant",reorderTriggerPassed:"La date de déclenchement {{date}} est passée.",shoppingList:"Liste d'achats",shoppingListItems_one:"({{count}} article)",shoppingListItems_other:"({{count}} articles)",shoppingListEmpty:"La liste d'achats est vide. Cliquez sur l'icône panier d'une ligne pour ajouter des articles.",addToCart:"Ajouter à la liste d'achats",alertsSnoozed:"Désactiver les alertes pour ce SKU",alertsEnabled:"Activer les alertes pour ce SKU",addedToCart:"Ajouté à la liste de courses",failedAddItem:"Impossible d'ajouter l'article",listView:"Liste",logisticsView:"Logistique",qty:"Qté",weight:"Poids",leadTime:"Délai",expectedRestock:"Réapprovisionnement prévu",status:"Statut",note:"Note",pending:"En attente",purchased:"Commandé",received:"Reçu",markPurchased:"Marquer comme commandé",markReceived:"Marquer comme reçu — ajoute les bobines au stock",resetToPending:"Remettre en attente",remove:"Supprimer",clearAll:"Tout effacer",downloadCsv:"CSV",addToCartTitle:"Ajouter à la liste de courses",byQuantity:"Par quantité",byDuration:"Par durée",numberOfSpools:"Nombre de bobines",lastHowManyDays:"Combien de jours doit-il durer ?",noUsageQty:"Pas de données d'utilisation — quantité définie à 1.",noteOptional:"Note (optionnel)",notePlaceholder:"ex. pour le projet X, urgent…",addNSpools_one:"Ajouter {{count}} bobine",addNSpools_other:"Ajouter {{count}} bobines",onArrival:"À la livraison",stockBreakIn:"Rupture de stock dans {{days}}j.",stockRunsOutBefore:"Le stock s'épuise avant la fin du délai de {{lt}}j.",atRate:"À {{rate}}g/jour, vous avez besoin de",moreSpools_one:"{{count}} bobine supplémentaire",moreSpools_other:"{{count}} bobines supplémentaires",bridgeGap:"pour combler l'écart.",noReadAccess:"Vous n'avez pas la permission de consulter les prévisions de stock.",noWriteAccess:"Vous n'avez pas la permission de modifier les paramètres de prévision."}},Spe={nav:{printers:"プリンター",archives:"アーカイブ",queue:"印刷キュー",stats:"統計",profiles:"プロファイル",maintenance:"メンテナンス",projects:"プロジェクト",inventory:"フィラメント",files:"ファイル管理",makerworld:"MakerWorld",notifications:"通知",settings:"設定",system:"システム",collapseSidebar:"サイドバーを閉じる",expandSidebar:"サイドバーを開く",update:"アップデート",updateAvailable:"アップデートあり: v{{version}}",updateAvailableBanner:"バージョン {{version}} が利用可能です！",viewUpdate:"アップデートを表示",viewOnGithub:"GitHubで表示",keyboardShortcuts:"キーボードショートカット (?)",switchToLight:"ライトモードに切替",switchToDark:"ダークモードに切替",switchToSystem:"システムモードに切替",smartSwitches:"スマートスイッチ",logout:"ログアウト",installApp:"アプリをインストール",installAppSuccess:"Bambuddyをインストールしました"},common:{save:"保存",saving:"保存中...",cancel:"キャンセル",delete:"削除",edit:"編集",add:"追加",close:"閉じる",confirm:"確認",loading:"読み込み中...",error:"エラー",errorLoading:"データの読み込みエラー",retry:"再試行",success:"成功",warning:"警告",enabled:"有効",disabled:"無効",yes:"はい",no:"いいえ",on:"オン",off:"オフ",all:"すべて",none:"なし",search:"検索",filter:"フィルター",sort:"並べ替え",refresh:"更新",download:"ダウンロード",upload:"アップロード",uploading:"アップロード中...",uploadFailed:"アップロード失敗",actions:"操作",status:"ステータス",name:"名前",description:"説明",date:"日付",time:"時間",hours:"時間",minutes:"分",seconds:"秒",days:"日",enable:"有効化",disable:"無効にする",permissions:"権限",noPrinters:"プリンターが登録されていません",noData:"データがありません",linkNotFound:"リンクが見つかりません",required:"必須",optional:"オプション",dismiss:"閉じる",apply:"適用",reset:"リセット",export:"エクスポート",import:"インポート",clear:"クリア",selectAll:"すべて選択",deselectAll:"すべて選択解除",noChange:"— 変更なし —",unchanged:"変更なし",unassigned:"未割当",unknown:"不明",unknownError:"不明なエラー",today:"今日",tomorrow:"明日",asap:"即時",overdue:"期限超過",now:"今すぐ",collapse:"折りたたむ",expand:"展開",viewArchive:"アーカイブを表示",viewInFileManager:"ファイルマネージャーで表示",addedBy:"{{username}}が追加",prints:"プリント",more:"+{{count}}件",ascending:"昇順",descending:"降順",back:"戻る",copy:"コピー",copied:"コピーしました!",printer:"プリンター",remove:"削除",type:"種類",print:"印刷",rename:"名前変更",move:"移動",create:"作成",duplicate:"複製",left:"左",right:"右"},printers:{addPreflight:{checking:"接続を確認しています...",warning:"一部の接続チェックに失敗しました。このプリンターはオフラインと表示される可能性があります。下のチェックを確認し、可能な範囲で修正するか、そのまま保存してください。",back:"戻る",saveAnyway:"そのまま保存"},title:"プリンター",addPrinter:"プリンターを追加",editPrinter:"プリンターを編集",deletePrinter:"プリンターを削除",printerName:"プリンター名",serialNumber:"シリアル番号",ipAddress:"IPアドレス / ホスト名",accessCode:"アクセスコード",model:"モデル",nozzleCount:"ノズル数",autoArchive:"自動アーカイブ",status:{available:"利用可能",idle:"待機中",printing:"印刷中",paused:"一時停止",offline:"オフライン",problem:"問題",error:"エラー",finished:"完了",unknown:"不明"},temperatures:{nozzle:"ノズル",bed:"ベッド",chamber:"チャンバー"},progress:"{{percent}}% 完了",timeRemaining:"残り {{time}}",deleteConfirm:"「{{name}}」を削除しますか？",maintenanceOk:"メンテナンス正常",maintenanceWarning:"{{count}}件の警告",maintenanceWarning_plural:"{{count}}件の警告",maintenanceDue:"{{count}}件のメンテナンス期限",maintenanceDue_plural:"{{count}}件の期限",sort:{name:"名前",status:"ステータス",model:"モデル",location:"ロケーション",ascending:"昇順で並べ替え",descending:"降順で並べ替え"},cardSize:{small:"小",medium:"中",large:"大",extraLarge:"特大"},hideOffline:"オフラインを非表示",nextAvailable:"次に完了",powerOn:"電源オン",offlinePrintersWithPlugs:"スマートプラグ付きオフラインプリンター",noPrintersConfigured:"プリンターが設定されていません",search:"プリンターを検索...",noSearchResults:"検索またはフィルターに一致するプリンターがありません",filter:{allStatuses:"すべてのステータス",allLocations:"すべての場所"},toolbar:{filters:"フィルター",view:"表示",actions:"操作"},readyToPrint:"印刷可能",external:"外部",extL:"Ext-L",extR:"Ext-R",deleteArchives:"印刷アーカイブを削除",noLabel:"ラベルなし",printPreview:"印刷プレビュー",width:"幅",height:"高さ",noObjectsFound:"オブジェクトが見つかりません",objectsLoadedOnPrintStart:"オブジェクトは印刷開始時に読み込まれます",willBeSkipped:"スキップされます",name:"名前",serialCannotBeChanged:"シリアル番号は変更できません",locationHelp:"プリンターのグループ化とキュージョブのフィルタリングに使用",wifiSignal:{veryWeak:"非常に弱い",weak:"弱い",fair:"注意",good:"良好",excellent:"非常に良い"},maintenanceUpToDate:"すべてのメンテナンスが最新です",chamberLightOn:"チャンバーライトをオンにしました",chamberLightOff:"チャンバーライトをオフにしました",files:"ファイル",browseFiles:"プリンターのファイルを参照",autoOffAfterPrint:"印刷後に自動電源オフ",autoOffExecuted:"自動オフが実行されました - リセットするにはプリンターの電源を入れてください",hmsErrors:"クリックしてHMSエラーを表示",viewHmsErrors:"{{count}}件のHMSエラーを表示",resume:"再開",pause:"一時停止",stop:"停止",camera:"カメラ",skipObject:"オブジェクトスキップ",reconnect:"再接続",forceRefresh:"強制更新",forceRefreshSuccess:"更新をリクエストしました",mqttDebug:"MQTTデバッグ",printerInformation:"プリンター情報",copyToClipboard:"コピー",copied:"コピーしました！",state:"状態",wifiSignalLabel:"WiFi信号",developerMode:"開発者モード",enabled:"有効",disabled:"無効",addedOn:"追加日",sdCard:"SDカード",inserted:"挿入済み",notInserted:"未挿入",totalPrintHours:"印刷時間",activeNozzle:"アクティブ: {{nozzle}}ノズル",nozzleRack:"ノズルラック",nozzleDocked:"ドッキング中",nozzleMounted:"マウント中",nozzleActive:"アクティブ",nozzleIdle:"アイドル",nozzleDiameter:"直径",nozzleType:"タイプ",nozzleStatus:"ステータス",nozzleFilament:"フィラメント",nozzleWear:"摩耗",nozzleMaxTemp:"最高温度",nozzleSerial:"シリアル",nozzleHardenedSteel:"焼入れ鋼",nozzleStainlessSteel:"ステンレス鋼",nozzleTungstenCarbide:"タングステンカーバイド",nozzleFlow:"フロー",nozzleHighFlow:"ハイフロー",nozzleStandardFlow:"スタンダード",firmwareUpdate:"ファームウェアアップデート",firmwareInstructions:"プリンターのタッチスクリーンで",firmwareNav:"に移動",settings:"設定",firmware:"ファームウェア",discoverPrinters:"プリンターを検出",searching:"検索中...",manualEntry:"手動入力",addFromCloud:"クラウドから追加",toast:{printerDeleted:"プリンターを削除しました",missingSpoolAssignment:"{{printer}}で印刷を開始しました。以下のスプール割り当てがありません: {{slots}}",printerAdded:"プリンターを追加しました",printerUpdated:"プリンターを更新しました",failedToDelete:"プリンターの削除に失敗しました",failedToAdd:"プリンターの追加に失敗しました",connectionFailedNotAdded:"プリンターに接続できませんでした。IPアドレス、シリアル番号、アクセスコードを確認し、LAN専用モードが有効になっていることを確認してください。プリンターは追加されていません。",failedToUpdate:"プリンターの更新に失敗しました",commandSent:"コマンドを送信しました",failedToSendCommand:"コマンドの送信に失敗しました",turnedOn:"{{name}} の電源をオンにしました",failedToPowerOn:"{{name}} の電源オンに失敗しました",scriptTriggered:"スクリプトを実行しました",printStopped:"印刷を停止しました",printPaused:"印刷を一時停止しました",printResumed:"印刷を再開しました",referenceDeleted:"リファレンスを削除しました",detectionAreaSaved:"検出エリアを保存しました",failedToRunScript:"スクリプトの実行に失敗しました",failedToStopPrint:"印刷の停止に失敗しました",failedToPausePrint:"印刷の一時停止に失敗しました",failedToResumePrint:"印刷の再開に失敗しました",failedToControlChamberLight:"チャンバーライトの制御に失敗しました",failedToSetSpeed:"印刷速度の設定に失敗しました",failedToUpdateSetting:"設定の更新に失敗しました",failedToSkipObjects:"オブジェクトのスキップに失敗しました",failedToRereadRfid:"RFIDの再読み取りに失敗しました",failedToCheckPlate:"プレートの確認に失敗しました",failedToUpdateLabel:"ラベルの更新に失敗しました",failedToDeleteReference:"リファレンスの削除に失敗しました",failedToSaveDetectionArea:"検出エリアの保存に失敗しました",plateCheckEnabled:"プレートチェックを有効にしました",plateCheckDisabled:"プレートチェックを無効にしました",calibrationSaved:"キャリブレーションを保存しました！",calibrationFailed:"キャリブレーションに失敗しました",rfidRereadInitiated:"RFID再読み取りを開始しました",loadInitiated:"フィラメントをロード中…",unloadInitiated:"フィラメントをアンロード中…",failedToLoad:"フィラメントのロードに失敗",failedToUnload:"フィラメントのアンロードに失敗"},connection:{connected:"接続中",offline:"オフライン"},plateStatus:{markCleared:"プレートをクリア済みにする",cleared:"プレートクリア済み",notCleared:"プレート未クリア",inUse:"プレート使用中"},queue:{inQueue:"キュー内 {{count}} 件",inQueue_plural:"{{count}}件がキュー内"},controls:"コントロール",rfid:{reread:"RFID再読み取り"},ams:{load:"ロード",unload:"アンロード"},bedJog:{title:"ビルドプレートを移動",bed:"ベッド",step:"ステップ (mm)",up:"プレートを上へ",down:"プレートを下へ",disabledWhilePrinting:"印刷中は無効",notHomedTitle:"プリンターがホーミングされていません",notHomedMessage:"前回の印刷以降、プリンターがホーミングされていません。安全な位置決めのためにまずオートホーミングを実行するか（ツールヘッドをパークしてからX・Y・Zをホーミングします）、このまま移動してください — ソフトエンドストップはバイパスされます。",homeZ:"オートホーミング",moveAnyway:"このまま移動",homingStarted:"プリンターをオートホーミング中…"},permission:{noAdd:"プリンターを追加する権限がありません",noEdit:"プリンターを編集する権限がありません",noDelete:"プリンターを削除する権限がありません",noControl:"プリンターを制御する権限がありません",noFiles:"このディレクトリにファイルがありません",noAmsRfid:"AMS RFIDを再読み取りする権限がありません",noSmartPlugControl:"スマートプラグを制御する権限がありません",noCamera:"カメラを表示する権限がありません"},modal:{addTitle:"プリンターを追加",editTitle:"プリンターを編集",myPrinter:"マイプリンター",selectModel:"モデルを選択...",locationGroup:"ロケーション / グループ",locationPlaceholder:"例: 工房、オフィス、地下室",autoArchiveLabel:"完了した印刷を自動アーカイブ",fromPrinterSettings:"プリンターの設定から取得",modelOptional:"モデル（任意）",saveChanges:"変更を保存"},skipObjects:{tooltip:"オブジェクトスキップ",onlyWhilePrinting:"オブジェクトスキップ（印刷中のみ）",requiresMultiple:"オブジェクトスキップ（2個以上必要）",title:"オブジェクトスキップ",matchIdsInfo:"プリンター画面のIDと照合してください",printerShowsIds:"プリンター画面にビルドプレート上のオブジェクトIDが表示されます",skipSelected:"選択をスキップ",skipping:"スキップ中...",noObjectsSelected:"オブジェクトが選択されていません",selectObjectsToSkip:"現在の印刷からスキップするオブジェクトを選択してください",skipped:"スキップ済み",objectsSkipped:"オブジェクトをスキップしました",activeCount:"{{count}}個アクティブ",waitForLayer:"オブジェクトをスキップするにはレイヤー2以降をお待ちください（現在レイヤー{{layer}}）",skip:"スキップ",confirmTitle:"オブジェクトをスキップしますか？",confirmMessage:"「{{name}}」をスキップしますか？この操作は元に戻せません。"},confirm:{deleteTitle:"プリンターを削除",deleteMessage:"「{{name}}」を削除しますか？すべての接続設定が削除されます。",deleteArchivesNote:"このプリンターのすべての印刷履歴が完全に削除されます。",keepArchivesNote:"印刷履歴は保持されますが、このプリンターとの関連は解除されます。",stopTitle:"印刷を停止",stopMessage:"「{{name}}」の現在の印刷を停止しますか？印刷ジョブがキャンセルされます。",stopButton:"印刷を停止",pauseTitle:"印刷を一時停止",pauseMessage:"「{{name}}」の現在の印刷を一時停止しますか？",pauseButton:"印刷を一時停止",resumeTitle:"印刷を再開",resumeMessage:"「{{name}}」の印刷を再開しますか？",resumeButton:"印刷を再開",powerOnTitle:"プリンターの電源をオン",powerOnMessage:"「{{name}}」の電源をオンにしますか？",powerOnButton:"電源オン",powerOffTitle:"プリンターの電源をオフ",powerOffMessage:"「{{name}}」の電源をオフにしますか？",powerOffWarning:"警告: 「{{name}}」は現在印刷中です！電源をオフにしますか？印刷が中断され、プリンターが損傷する可能性があります。",powerOffButton:"電源オフ",haToggleTitle:"「{{name}}」を切り替え",haToggleMessage:"Home Assistant エンティティ {{entity}} を切り替えますか？現在オンの場合、電源がオフになる可能性があります。",haToggleWarning:"警告: 「{{name}}」は現在印刷中です！{{entity}} を切り替えると電源が切れ、印刷が中断される可能性があります。続行しますか？",haToggleButton:"切り替え"},bulk:{select:"選択",selectAll:"すべて選択",selectByLocation:"場所で選択",selected:"{{count}}件選択中",actions:{stop:"停止",pause:"一時停止",resume:"再開",clearPlate:"ベッドをクリア",clearHMS:"通知をクリア"},confirm:{stopTitle:"{{count}}件の印刷を停止",stopMessage:"{{count}}台のプリンターのアクティブな印刷をキャンセルします。この操作は元に戻せません。",stopButton:"すべて停止",pauseTitle:"{{count}}件の印刷を一時停止",pauseMessage:"{{count}}台のプリンターのアクティブな印刷を一時停止します。",pauseButton:"すべて一時停止",clearPlateTitle:"{{count}}台のプリントベッドをクリア",clearPlateMessage:"{{count}}台のプリンターのプリントベッドをクリアし、キュー内のジョブが開始される場合があります。",clearPlateButton:"すべてクリア"},success:"{{count}}台のプリンターで{{action}}が完了",partial:"{{succeeded}}件成功、{{failed}}件失敗",noneApplicable:"選択したプリンターにこのアクションに適した状態のものがありません",selectByState:"ステータスで選択"},discovery:{title:"プリンター",searching:"検索中...",scanning:"スキャン中...",scanProgress:"スキャン中... {{scanned}}/{{total}}",foundPrinters:"{{count}}台のプリンターを検出",noPrintersFound:"プリンターが見つかりません",noPrintersFoundSubnet:"指定されたサブネットにプリンターが見つかりません。",noPrintersFoundNetwork:"ネットワーク上にプリンターが見つかりません。",allConfigured:"検出されたすべてのプリンターは既に設定済みです。",alreadyAdded:"追加済み",select:"選択",manualEntry:"手動入力",addFromCloud:"クラウドから追加",subnetToScan:"スキャンするサブネット",dockerNote:"Dockerを検出しました。プリンターのサブネットをCIDR表記で入力してください。docker-compose.ymlでnetwork_mode: hostが必要です。",scanSubnet:"サブネットをスキャンしてプリンターを検出",discoverNetwork:"ネットワーク上のプリンターを検出",scanningSubnet:"サブネットでBambuプリンターをスキャン中...",scanningNetwork:"ネットワークをスキャン中...",serialRequired:"シリアル番号が必要です",unknown:"不明",failedToStart:"印刷の開始に失敗しました",customSubnetOption:"カスタムサブネット...",customSubnetLabel:"カスタムサブネット (CIDR)",customSubnetNote:"プリンターがこのサーバーと別のネットワークにある場合は、カスタムサブネットを使用してください。FTP (990) と MQTT (8883) のポートが、ルーティング境界を越えて到達可能である必要があります。"},drying:{start:"乾燥開始",stop:"乾燥停止",temperature:"温度",duration:"時間",hours:"時間",timeRemaining:"残り {{time}}",active:"乾燥中",notSupported:"乾燥非対応",powerRequired:"AMS電源アダプターを接続して乾燥を有効にしてください",startingDrying:"乾燥を開始しています...",stoppingDrying:"乾燥を停止しています...",rotateTray:"乾燥中にスプールを回転"},filaments:"フィラメント",openCameraOverlay:"カメラオーバーレイを開く",openCameraWindow:"カメラを新しいウィンドウで開く",firmwareUpdateAvailable:"ファームウェアアップデートあり: {{current}} → {{latest}}",firmwareUpToDate:"ファームウェア {{version}} — 最新",firmwareUpdateButton:"アップデート",plateDetection:{noPermission:"このページにアクセスする権限がありません。",enabledClick:"プレートチェック有効 - クリックして無効化",disabledClick:"プレートチェック無効 - クリックして有効化",manageCalibration:"プレート検出キャリブレーションを管理",calibrationRequired:"キャリブレーションが必要です",calibrationInstructions:"ビルドプレートが<strong>完全に空</strong>であることを確認してから、キャリブレーションをクリックしてください。",calibrationDescription:"キャリブレーションは空のプレートのリファレンス画像を撮影します。以降のチェックではこのリファレンスと比較してオブジェクトを検出します。",calibrationTip:"<strong>ヒント:</strong> 異なるプレート用に最大5つのキャリブレーションを保存できます。チェック時に最適なものが自動的に使用されます。",plateEmpty:"プレートは空のようです",objectsDetected:"オブジェクトを検出しました",confidence:"信頼度",difference:"差分",analysisPreview:"分析プレビュー:",analysisLegend:"緑の枠 = 検出エリア、赤のオーバーレイ = キャリブレーションとの差分",savedReferences:"保存済みリファレンス ({{count}}/{{max}})",deleteReference:"リファレンスを削除",labelPlaceholder:"ラベル...",clickToEdit:"{{label}} - クリックして編集",clickToAddLabel:"クリックしてラベルを追加"},speed:{title:"印刷速度",silent:"サイレント (50%)",standard:"スタンダード (100%)",sport:"スポーツ (124%)",ludicrous:"ルディクラス (166%)"},airduct:{title:"エアダクトモード",cooling:"冷却",heating:"加熱"},noSdCard:"SDなし",door:{open:"開",closed:"閉"},fans:{partCooling:"パーツ冷却ファン",auxiliary:"補助ファン",chamber:"チャンバーファン"},clickToViewHmsErrors:"クリックしてHMSエラーを表示",estimatedCompletion:"完了予定時刻",plateNumber:"プレート {{number}}",slotOptions:"スロットオプション",amsPopup:{friendlyName:"AMS名",friendlyNamePlaceholder:"例: AMS フレンドリー名",serialNumber:"シリアル番号",firmwareVersion:"ファームウェア",save:"保存",clear:"クリア",noEditPermission:"AMS ユニットの名前を変更する権限がありません"},firmwareModal:{title:"ファームウェアアップデート",titleUpToDate:"ファームウェア情報",currentVersion:"現在のバージョン",latestVersion:"最新バージョン",releaseNotes:"リリースノート",checkingPrereqs:"前提条件を確認中...",sdCardReady:"SDカード準備完了。下をクリックしてファームウェアをアップロードしてください。",uploadedSuccess:"ファームウェアをSDカードにアップロードしました！",applyInstructions:"プリンターでアップデートを適用するには:",step1:"プリンターのタッチスクリーンで設定に移動",step2:"ファームウェアに移動",step3:"SDカードからアップデートを選択",step4:"アップデートには10〜20分かかります",done:"完了",starting:"開始中...",uploadFirmware:"ファームウェアをアップロード",uploadFailed:"アップロード開始に失敗しました: {{error}}",uploadedToast:"ファームウェアをアップロードしました！プリンター画面からアップデートを実行してください。",availableVersions:"利用可能なバージョン",usable:"利用可",unavailable:"利用不可",installed:"インストール済み",newerBadge:"新しい",olderBadge:"古い",currentBadge:"現在"},accessCodePlaceholder:"プリンター設定から取得",roi:{title:"プリンター",xStart:"X開始",yStart:"Y開始",width:"幅",height:"高さ",instruction:"ビルドプレートに焦点を合わせるように検出エリアを調整してください。プレビューの緑の枠が現在のエリアを示しています。"},developerModeWarning:"開発者LANモードが有効になっていません: {{names}}。一部の機能が動作しない可能性があります。",howToEnable:"有効化方法",incompatibleFile:"このファイルは{{slicedFor}}用にスライスされていますが、このプリンターは{{printerModel}}です",dropNotPrintable:".gcodeおよび.gcode.3mfファイルのみ印刷できます",dropToPrint:"ドロップして印刷",cannotPrint:"プリンター使用中"},archives:{title:"印刷アーカイブ",searchPlaceholder:"アーカイブを検索...",filterByPrinter:"プリンターで絞り込み",filterByStatus:"ステータスで絞り込み",sortBy:"並べ替え",sortNewest:"新しい順",sortOldest:"古い順",sortName:"名前順",sortDuration:"時間順",sortLargest:"大きい順",sortSmallest:"小さい順",sortSize:"サイズ",noArchives:"アーカイブが見つかりません",noArchivesSearch:"検索条件に一致するアーカイブがありません",originalPrintNotVisible:"元の印刷が表示されていません - フィルターをクリアしてみてください",noArchivesYet:"アーカイブはまだありません",prints:"件",pagination:{showing:"表示中",to:"〜",of:"/",show:"表示",page:"ページ",all:"すべて"},loadingArchives:"アーカイブを読み込み中...",releaseToUpload:"ドロップしてアップロード",showAll:"すべて表示",showFavoritesOnly:"お気に入りのみ表示",gridView:"グリッド表示",listView:"リスト表示",calendarView:"カレンダー表示",logView:"印刷ログ",manageTags:"タグを管理",showFailedPrints:"失敗した印刷を表示",hideFailedPrints:"失敗した印刷を非表示",hideDuplicates:"重複を非表示",viewOriginalPrint:"クリックして元の印刷を表示 (#{{id}})",printTime:"印刷時間",filamentUsed:"フィラメント使用量",cost:"コスト",reprint:"再印刷",preview:"プレビュー",deleteArchive:"アーカイブを削除",deleteConfirm:"このアーカイブを削除しますか？",favorite:"お気に入り",unfavorite:"お気に入りから削除",viewDetails:"詳細を表示",status:{completed:"完了",failed:"失敗",stopped:"中止"},toast:{source3mfAttached:"ソース3MFを添付しました: {{filename}}",failedUploadSource3mf:"ソース3MFのアップロードに失敗しました",source3mfRemoved:"ソース3MFを削除しました",failedRemoveSource3mf:"ソース3MFの削除に失敗しました",f3dAttached:"F3Dを添付しました: {{filename}}",failedUploadF3d:"F3Dのアップロードに失敗しました",f3dRemoved:"F3Dを削除しました",failedRemoveF3d:"F3Dの削除に失敗しました",timelapseAttached:"タイムラプスを添付しました: {{filename}}",timelapseAlreadyAttached:"タイムラプスは既に添付されています",noMatchingTimelapse:"一致するタイムラプスが見つかりません",failedScanTimelapse:"タイムラプスのスキャンに失敗しました",failedAttachTimelapse:"タイムラプスの添付に失敗しました",timelapseRemoved:"タイムラプスを削除しました",failedRemoveTimelapse:"タイムラプスの削除に失敗しました",timelapseUploaded:"タイムラプスをアップロードしました: {{filename}}",failedUploadTimelapse:"タイムラプスのアップロードに失敗しました",archiveDeleted:"アーカイブを削除しました",failedDeleteArchive:"アーカイブの削除に失敗しました",addedToFavorites:"お気に入りに追加しました",removedFromFavorites:"お気に入りから削除しました",projectUpdated:"プロジェクトを更新しました",failedUpdateProject:"プロジェクトの更新に失敗しました",linkCopied:"リンクをクリップボードにコピーしました",failedCopyLink:"リンクのコピーに失敗しました",photoDeleted:"写真を削除しました",failedDeletePhoto:"写真の削除に失敗しました",failedDeleteArchives:"アーカイブの削除に失敗しました",failedUpdateFavorites:"お気に入りの更新に失敗しました",exportDownloaded:"エクスポートをダウンロードしました",exportFailed:"エクスポートに失敗しました"},menu:{print:"印刷",schedule:"スケジュール",openInBambuStudio:"スライサーで開く",slice:"スライス",externalLink:"外部リンク",viewOnMakerWorld:"MakerWorldで表示",preview3d:"3Dプレビュー",viewTimelapse:"タイムラプスを表示",scanForTimelapse:"タイムラプスをスキャン",uploadTimelapse:"タイムラプスをアップロード",removeTimelapse:"タイムラプスを削除",downloadSource3mf:"ソース3MFをダウンロード",uploadSource3mf:"ソース3MFをアップロード",replaceSource3mf:"ソース3MFを置換",removeSource3mf:"ソース3MFを削除",uploadF3d:"F3Dをアップロード",replaceF3d:"F3Dを置換",downloadF3d:"Fusion 360デザインファイルをダウンロード",removeF3d:"F3Dを削除",download:"ダウンロード",copyDownloadLink:"ダウンロードリンクをコピー",qrCode:"QRコード",viewPhotos:"写真を表示",viewPhotosCount:"写真を表示 ({{count}})",projectPage:"プロジェクトページ",addToFavorites:"お気に入りに追加",removeFromFavorites:"お気に入りから削除",edit:"編集",printLog:"印刷ログ",goToProject:"プロジェクトへ: {{name}}",addToProject:"プロジェクトに追加",removeFromProject:"プロジェクトから削除",loading:"アーカイブを読み込み中...",noProjectsAvailable:"利用可能なプロジェクトがありません",searchProjects:"プロジェクトを検索…",select:"選択",deselect:"選択解除",delete:"削除"},permission:{noReprint:"このアーカイブを再印刷する権限がありません",noAddToQueue:"キューに追加する権限がありません",noUpdateArchives:"アーカイブを更新する権限がありません",noUploadFiles:"ファイルをアップロードする権限がありません",noDownload:"アーカイブをダウンロードする権限がありません",noCopyLink:"ダウンロードリンクをコピーする権限がありません",noDelete:"このアーカイブを削除する権限がありません",noCreate:"アーカイブを作成する権限がありません"},platePicker:{title:"プレビューするプレートを選択",hint:"このアーカイブには複数のプレートがあります。GCodeビューアで開くプレートを選択してください。",plateLabel:"プレート {{index}}",objectCount:"{{count}} オブジェクト",objectCount_plural:"{{count}} オブジェクト",noGcode:"このアーカイブにはプレビュー可能なスライス済みGコードがありません。まずBambu Studioで開いてスライスしてください。"},card:{previousPlate:"前のプレート",nextPlate:"次のプレート",plateNumber:"プレート {{index}}",moreOptions:"その他のオプション",addToFavorites:"お気に入りに追加",removeFromFavorites:"お気に入りから削除",cancelled:"キャンセル",failed:"失敗",duplicate:"重複",duplicateTitle:"このモデルは以前印刷されています",openSource3mf:"ソース3MFをBambu Studioで開く（右クリックでオプション表示）",downloadF3d:"Fusion 360デザインファイルをダウンロード",viewTimelapse:"タイムラプスを表示",viewPhoto:"写真を表示",viewPhotos:"{{count}}枚の写真を表示",openFolder:"フォルダーを開く: {{name}}",slicedFile:"スライス済みファイル - 印刷可能",sourceFile:"ソースファイルのみ - AMSマッピング不可",gcode:"GCODE",source:"ソース",project:"プロジェクト: {{name}}",runsBadge:"{{count}} 回印刷",runsBadgeTitle:"合計 {{count}} 回 — 成功 {{successful}} 回、失敗 {{failed}} 回。クリックして印刷ログを開きます。",estimated:"推定: {{time}}",actual:"実際: {{time}}",accuracy:"精度: {{percent}}%",filament:"{{weight}} g",layer:"{{count}} レイヤー",layers:"{{count}} レイヤー",object:"{{count}}オブジェクト",objects:"{{count}}オブジェクト",slicedFor:"{{model}}用にスライス",uploadedBy:"アップロード者",noPermissionReprint:"再印刷する権限がありません",noFileForReprint:"3MFファイルがありません — 印刷記録時にプリンターからファイルをダウンロードできませんでした",noPermissionEdit:"プロファイルを編集する権限がありません",noPermissionDelete:"アーカイブを削除する権限がありません",reprint:"再印刷",schedulePrint:"印刷をスケジュール",schedule:"スケジュール",openInBambuStudio:"スライサーで開く",openInBambuStudioToSlice:"スライサーでスライス",slice:"スライス",externalLink:"外部リンク",makerWorld:"MakerWorld – {{designer}}",viewProject:"プロジェクトを表示",noExternalLink:"外部リンクなし",preview3d:"3Dプレビュー",download:"ダウンロード",edit:"編集",delete:"削除"},runLog:{title:"印刷ログ",modalTitle:"印刷ログ — {{name}}",modalTitleFallback:"このアーカイブ",empty:"このアーカイブの印刷イベントはまだ記録されていません。",col:{date:"日付",status:"ステータス",duration:"時間",filament:"フィラメント",cost:"コスト"},status:{completed:"完了",failed:"失敗",cancelled:"キャンセル",stopped:"停止",skipped:"スキップ",printing:"印刷中"}},modal:{deleteArchive:"アーカイブを削除",deleteConfirm:'"{{name}}" を削除しますか？この操作は取り消せません。',deleteButton:"削除",deletePurgeStats:"このプリントをQuick Statsからも削除（フィラメント、時間、コスト、電力）",removeSource3mf:"ソース3MFを削除",removeSource3mfConfirm:'"{{name}}"からソース3MFファイルを削除してもよろしいですか？元のスライサープロジェクトファイルが削除されます。',removeButton:"削除",removeF3d:"F3Dを削除",removeF3dConfirm:'"{{name}}"からFusion 360デザインファイルを削除してもよろしいですか？',removeTimelapse:"タイムラプスを削除",removeTimelapseConfirm:'"{{name}}"からタイムラプス動画を削除してもよろしいですか？',timelapse:"{{name}} - タイムラプス",selectTimelapse:"タイムラプスを選択",selectTimelapseDesc:"自動一致が見つかりませんでした。この印刷のタイムラプスを選択してください:",deleteArchives:"印刷アーカイブを削除",deleteArchivesConfirm:"{{count}}件のアーカイブを削除しますか？この操作は元に戻せません。",deleteCount:"{{count}}件を削除"},page:{title:"印刷アーカイブ",printsCount:"{{filtered}} / {{total}} 件のプリント",dropFilesHere:".3mfファイルをここにドロップ",releaseToUpload:"ドロップしてアップロード",only3mfSupported:".3mfファイルのみ対応しています",close:"閉じる",selected:"{{count}}件選択中",selectAll:"すべて選択",tags:"タグ",project:"プロジェクト",favorite:"お気に入り",delete:"削除",toggledFavorites:"{{count}}件のアーカイブのお気に入りを切替えました",failedUpdateFavorites:"お気に入りの更新に失敗しました",archivesDeleted:"{{count}}件のアーカイブを削除しました",failedDeleteArchives:"アーカイブの削除に失敗しました",photoDeleted:"写真を削除しました",failedDeletePhoto:"写真の削除に失敗しました"},list:{name:"名前",printer:"プリンター",date:"日付",size:"サイズ",actions:"操作",hasTimelapse:"タイムラプスあり"},log:{date:"日時",printName:"印刷名",printer:"プリンター",user:"ユーザー",status:"ステータス",duration:"所要時間",filament:"フィラメント",allPrinters:"全プリンター",allUsers:"全ユーザー",allStatuses:"全ステータス",cancelled:"キャンセル",skipped:"スキップ",dateFrom:"開始日",dateTo:"終了日",noEntries:"印刷ログが見つかりません",showing:"{{total}}件中{{count}}件を表示",rowsPerPage:"行数",page:"ページ",prev:"前へ",next:"次へ",clearLog:"ログをクリア",clearLogTitle:"印刷ログをクリア",clearLogConfirm:"すべての印刷ログエントリが完全に削除されます。アーカイブとキューアイテムには影響しません。この操作は元に戻せません。よろしいですか？",clearLogButton:"すべてクリア",cleared:"{{count}}件のログエントリを削除しました",clearFailed:"印刷ログの削除に失敗しました"}},queue:{filamentShort:{rowBadge:"割り当てられたスプールのフィラメントが不足しています",rowTooltip:"スケジューラーがこのアイテムをフラグしました。再生ボタンをクリックしてスロットごとの不足量を確認し、それでも印刷するか判断してください。",confirmTitle:"フィラメント不足",confirmIntro:"割り当てられたスプールでは少なくとも 1 つのスロットを賄えません。それでも印刷しますか？",lineItem:"スロット {{slot}}：必要 {{required}} g、残り {{remaining}} g",unknown:"不明",printAnyway:"それでも印刷"},title:"印刷キュー",subtitle:"印刷ジョブのスケジュールと管理",addToQueue:"キューに追加",print:"印刷",reprint:"再印刷",schedulePrint:"印刷をスケジュール",editQueueItem:"キューアイテムを編集",printToPrinters:"{{count}}台のプリンターで印刷",queueToPrinters:"{{count}}台のプリンターでキュー追加",queueSelectedPlates:"{{count}}プレートをキューに追加",selectAllPlates:"全{{count}}プレートを選択",deselectAll:"全て解除",printQueued:"キューに追加しました",itemsQueued:"{{count}}件をキューに追加しました",sending:"送信中...",sendingProgress:"送信中 {{current}}/{{total}}...",adding:"追加中...",addingProgress:"追加中 {{current}}/{{total}}...",savingProgress:"保存中 {{current}}/{{total}}...",clearQueue:"キューをクリア",clearHistory:"履歴をクリア",emptyQueue:"キューは空です",position:"順番",scheduledTime:"予定時刻",moveUp:"上に移動",moveDown:"下に移動",startNow:"今すぐ開始",printingInProgress:"印刷中...",viewArchive:"アーカイブを表示",viewInFileManager:"ファイルマネージャーで表示",itemCount:"{{count}}件",itemCount_plural:"{{count}}件のアイテム",dragToReorder:"ドラッグして並べ替え（ASAPのみ）",reorderHint:"順番はASAPアイテムのみに影響します。スケジュール済みアイテムは設定時刻に実行されます。",sjf:{label:"SJF",tooltip:"短いジョブ優先 — スケジューラーが短い印刷を優先します"},addedBy:"{{name}} が追加",nextInQueue:"次のキュー",clearPlateSuccess:"プレートをクリアしました — 次の印刷の準備完了",plateNumber:"プレート {{index}}",quantity:"数量",quantityHint:"{{count}}件のキューアイテムを作成",activeBatches:"アクティブなバッチ",batchProgress:"{{total}}件中{{completed}}件完了",cancelBatch:"残りをキャンセル",batchCancelled:"残りのバッチアイテムをキャンセルしました",cancelBatchConfirmTitle:"バッチをキャンセル",cancelBatchConfirmMessage:"このバッチの残りの保留中アイテムをすべてキャンセルしますか？",batch:"バッチ",sections:{currentlyPrinting:"印刷中",queued:"キュー中",history:"履歴"},status:{pending:"待機中",waiting:"待機中",printing:"印刷中",paused:"一時停止",completed:"完了",failed:"失敗",skipped:"スキップ",cancelled:"キャンセル済み"},summary:{printing:"印刷中",queued:"キュー中",totalTime:"キュー合計時間",totalWeight:"キュー合計重量",history:"履歴"},filter:{allPrinters:"すべてのプリンター",unassigned:"未割当",allStatus:"すべてのステータス",allLocations:"すべてのロケーション",any:"すべて"},sort:{byPosition:"順番で並べ替え",byName:"名前で並べ替え",byPrinter:"プリンターで並べ替え",bySchedule:"スケジュールで並べ替え",byDate:"日付で並べ替え",ascendingOldest:"昇順（古い順）",descendingNewest:"降順（新しい順）"},badges:{staged:"ステージ済み",requiresPrevious:"前の成功が必要",autoPowerOff:"自動電源オフ",gcodeInjection:"G-code"},empty:{title:"スケジュールされた印刷はありません",description:"アーカイブページのコンテキストメニューから「スケジュール」オプションを使用するか、ファイルをドラッグ＆ドロップして始めましょう。"},time:{asap:"即時",overdue:"期限超過",now:"今すぐ",lessThanMinute:"1分以内",inMinutes:"{{count}}分後",inHours:"{{count}}時間後"},actions:{stopPrint:"印刷を停止",startPrint:"印刷を開始",requeue:"再キュー"},bulkEdit:{title:"{{count}}件のアイテムを編集",title_plural:"{{count}}件のアイテムを編集",description:"変更した設定のみが選択されたアイテムに適用されます。",printer:"プリンター",noChange:"— 変更なし —",queueOptions:"キューオプション",staged:"ステージ済み",autoPowerOff:"印刷後に自動電源オフ",requirePrevious:"前の成功を必要とする",printOptions:"印刷オプション",bedLevelling:"ベッドレベリング",flowCalibration:"フローキャリブレーション",vibrationCalibration:"振動キャリブレーション",layerInspection:"第一層検査",timelapse:"タイムラプス",useAms:"AMS使用",applyChanges:"変更を適用",selectAll:"すべて選択",deselectAll:"すべて選択解除",selected:"{{count}}件選択中",editSelected:"選択を編集",cancelSelected:"選択をキャンセル"},confirm:{cancelTitle:"スケジュール済み印刷をキャンセル",cancelMessage:"「{{name}}」をキャンセルしますか？",stopTitle:"印刷を停止",stopMessage:"現在の印刷「{{name}}」を停止しますか？プリンター上の印刷ジョブがキャンセルされます。",removeTitle:"履歴から削除",removeMessage:"「{{name}}」をキュー履歴から削除しますか？",clearHistoryTitle:"履歴をクリア",clearHistoryMessage:"{{count}}件の履歴をすべて削除しますか？",cancelButton:"印刷をキャンセル",stopButton:"印刷を停止",thisPrint:"この印刷",thisItem:"このアイテム"},toast:{cancelled:"キャンセル済み",cancelFailed:"アイテムのキャンセルに失敗しました",removed:"キューアイテムを削除しました",removeFailed:"プロジェクトからのアーカイブ削除に失敗しました",stopped:"印刷を停止しました",stopFailed:"印刷の停止に失敗しました",released:"印刷をキューにリリースしました",startFailed:"印刷の開始に失敗しました",reorderFailed:"キューの並べ替えに失敗しました",historyCleared:"{{count}}件の履歴をクリアしました",clearHistoryFailed:"履歴のクリアに失敗しました",updateFailed:"アイテムの更新に失敗しました",bulkCancelled:"{{count}}件のアイテムをキャンセルしました",bulkCancelFailed:"アイテムのキャンセルに失敗しました"},timeline:{listView:"リスト",timelineView:"タイムライン",unassigned:"未割当",noData:"この日の予定された印刷はありません",allDoneBy:"すべての印刷は {{time}} までに完了予定",staged:"ステージング",filterAll:"すべて表示",filterPrinting:"印刷中",filterQueued:"待機中",time:{anyMoment:"まもなく",minutesLeft:"残り{{minutes}}分",hoursLeft:"残り{{hours}}時間",hoursMinutesLeft:"残り{{hours}}時間{{minutes}}分"},day:{previous:"前日",next:"翌日",today:"今日"}},permissions:{noStopPrint:"印刷を停止する権限がありません",noStartPrint:"印刷を開始する権限がありません",noEdit:"このキューアイテムを編集する権限がありません",noCancel:"このキューアイテムをキャンセルする権限がありません",noRequeue:"アイテムを再キューする権限がありません",noRemove:"このキューアイテムを削除する権限がありません",noClearHistory:"すべての履歴をクリアする権限がありません",noEditItems:"キューアイテムを編集する権限がありません",noCancelItems:"キューアイテムをキャンセルする権限がありません"}},backgroundDispatch:{unknownFile:"不明なファイル",unknownPrinter:"不明なプリンター",startingPrints:"印刷開始中",progressSummary:"{{complete}}/{{total}} 完了 • 配信済み: {{dispatched}} • 処理中: {{processing}}",expandDetails:"配信詳細を展開",collapseDetails:"配信詳細を折りたたむ",dismissToast:"配信トーストを閉じる",cancelDispatchJob:"配信ジョブをキャンセル",cancel:"キャンセル",cancelling:"キャンセル中…",awaitingPrinter:"プリンターを待機中…",status:{dispatched:"配信済み",processing:"処理中",completed:"完了",failed:"失敗",cancelled:"キャンセル済み"},toast:{cancellingUpload:"アップロードをキャンセル中...",cancelled:"配信をキャンセルしました",cancelFailed:"配信のキャンセルに失敗しました",completeWithFailures:"バックグラウンド配信完了: {{completed}} 件成功、{{failed}} 件失敗",completeSuccess:"バックグラウンド配信完了: {{completed}} 件成功",printStartedRemaining:"{{completed}} 件の印刷を開始、残り {{remaining}} 件送信中..."}},stats:{title:"統計",subtitle:"ウィジェットをドラッグして並べ替え。目のアイコンをクリックして非表示。",overview:"概要",totalPrints:"総印刷数",successRate:"成功率",totalPrintTime:"総印刷時間",printTime:"印刷時間",totalFilament:"総フィラメント使用量",filamentUsed:"フィラメント使用量",filamentCost:"フィラメントコスト",totalCost:"総コスト",energyUsed:"エネルギー使用量",energyCost:"エネルギーコスト",energyWarmingUpTooltip:"エネルギー追跡は毎時スナップショットを収集中です。選択範囲の前に少なくとも1つのスナップショットが存在すると、期間合計が正確になります。初期値は過小になる場合があります。",averagePrintTime:"平均印刷時間",printsPerDay:"1日あたりの印刷数",byPrinter:"プリンター別",printsByPrinter:"プリンター別印刷数",byMaterial:"素材別",byMonth:"月別",last7Days:"過去7日間",last30Days:"過去30日間",last90Days:"過去90日間",allTime:"全期間",quickStats:"クイック統計",printActivity:"印刷アクティビティ",filamentTypes:"フィラメントタイプ",filamentTrends:"フィラメントトレンド",failureAnalysis:"失敗分析",timeAccuracy:"時間精度",successful:"成功",failed:"失敗",cancelled:"キャンセル",perfectEstimate:"100% = 完全な推定",noTimeAccuracyData:"時間精度データがありません",noFilamentData:"フィラメントデータがありません",noPrinterData:"プリンターデータがありません",noPrintData:"印刷データがありません",noPrintDataLast30Days:"過去30日間の印刷データがありません",failureReasons:"失敗理由",topFailureReasons:"主な失敗理由",failedPrintsCount:"{{failed}} / {{total}} 件の印刷が失敗",lastWeekRate:"先週: {{rate}}%",resetLayout:"レイアウトをリセット",recalculateCosts:"コストを再計算",recalculateCostsHint:"現在のフィラメント価格ですべてのアーカイブコストを再計算",exportStats:"統計をエクスポート",exportAsCsv:"CSVでエクスポート",exportAsExcel:"Excelでエクスポート",hiddenCount:"{{count}}件非表示",exportDownloaded:"エクスポートをダウンロードしました",exportFailed:"エクスポートに失敗しました",layoutReset:"レイアウトをリセットしました",recalculatedCosts:"{{count}}件のアーカイブのコストを再計算しました",recalculateFailed:"コストの再計算に失敗しました",loadingStats:"統計を読み込み中...",noPermissionResetLayout:"レイアウトをリセットする権限がありません",noPermissionRecalculate:"コストを再計算する権限がありません",noPrintDataInRange:"選択した期間にデータがありません",periodFilament:"フィラメント使用量",periodCost:"コスト",avgPerPrint:"1印刷あたりの平均",usageOverTime:"時間推移",filamentByWeight:"重量",printDuration:"印刷時間分布",printerUtilization:"プリンター稼働率",filamentSuccess:"素材別成功率",printHabits:"印刷習慣",printTimeOfDay:"時間帯別プリント",colorDistribution:"カラー分布",noColorData:"カラーデータがありません",records:"記録",longestPrint:"最長プリント",heaviestPrint:"最重プリント",mostExpensivePrint:"最高額",busiestDay:"最多プリント日",successStreak:"連続成功",streakPrint:"連続プリント",streakPrints:"{{count}}連続プリント",printerStats:"プリンター統計",hours:"時間",avgPrints:"平均印刷数",noArchiveData:"印刷データがありません",filamentByTime:"推移",avgWeight:"平均重量",avgTime:"平均時間",filamentByPrints:"印刷数",timeframe:{today:"今日","this-week":"今週","this-month":"今月","last-7":"過去7日間","last-30":"過去30日間","last-90":"過去90日間","this-year":"今年","all-time":"全期間",custom:"カスタム",from:"開始",to:"終了"},allUsers:"全ユーザー",noUser:"ユーザーなし（システム）",filterByUser:"ユーザーでフィルター"},maintenance:{title:"メンテナンス",overview:"概要",allOk:"すべてのメンテナンスは最新です",dueCount:"{{count}}件の期限到来",dueCount_plural:"{{count}}件の期限到来",warningCount:"{{count}}件の警告",warningCount_plural:"{{count}}件の警告",totalPrintTime:"総印刷時間",nextMaintenance:"次回メンテナンス",nothingDue:"予定なし",tasks:"タスク",lastPerformed:"前回実施日",interval:"間隔",hoursRemaining:"残り{{hours}}時間",hoursOverdue:"{{hours}}時間超過",markDone:"完了にする",performMaintenance:"メンテナンスを実施",history:"履歴",noHistory:"メンテナンス履歴がありません",editPrintHours:"印刷時間を編集",currentHours:"現在の時間",statusTab:"ステータス",settingsTab:"設定",overdueCount:"{{count}}件超過",dueSoonCount:"{{count}}件まもなく期限",dueSoon:"まもなく期限",allGood:"問題なし",overdueBy:"{{duration}}超過",dueIn:"あと{{duration}}",timeLeft:"残り{{duration}}",day:"1日",days:"{{count}} 日",week:"1週間",weeks:"{{count}}週間",month:"1ヶ月",months:"{{count}}ヶ月",year:"1年",maintenanceTypes:"メンテナンスタイプ",maintenanceTypesDescription:"システムタイプとカスタムメンテナンスタスク",addCustomType:"カスタムタイプを追加",restoreDefaults:"デフォルトタスクを復元",intervalType:"インターバルタイプ",intervalValue:"間隔 ({{type}})",icon:"アイコン",documentationLink:"ドキュメントリンク（任意）",assignToPrinters:"プリンターに割り当て",selectAtLeastOnePrinter:"プリンターを1台以上選択してください",addType:"タイプを追加",custom:"カスタム",printHours:"印刷時間",calendarDays:"カレンダー日数",exampleName:"例: HEPAフィルター交換",viewDocumentation:"ドキュメントを表示",timeBasedInterval:"時間ベースのインターバル",intervalOverrides:"インターバルのオーバーライド",intervalOverridesDescription:"特定のプリンターの間隔をカスタマイズ",assignedToPrinters:"割り当て済みプリンター：",noPrintersAssigned:"プリンター未割り当て",addPrinterShort:"追加:",printersAssignedClick:"{{count}}台のプリンターを割り当て済み - クリックして管理",removeFromPrinter:"このプリンターから削除",types:{lubricateCarbonRods:"カーボンロッドの潤滑",lubricateRails:"リニアレールの潤滑",cleanNozzle:"ノズル/ホットエンドの清掃",checkBelts:"ベルト張力の確認",cleanBuildPlate:"ビルドプレートの清掃",checkExtruder:"エクストルーダーギアの確認",checkCooling:"冷却ファンの確認",generalInspection:"総合点検",cleanCarbonRods:"カーボンロッドの清掃",lubricateSteelRods:"スチールロッドの潤滑",cleanSteelRods:"スチールロッドの清掃",cleanLinearRails:"リニアレールの清掃",checkPtfeTube:"PTFEチューブの確認",replaceHepaFilter:"HEPAフィルター交換",replaceCarbonFilter:"カーボンフィルター交換",lubricateLeftNozzleRail:"左ノズルレールの潤滑"},maintenanceComplete:"メンテナンスを完了としてマークしました",typeUpdated:"メンテナンスタイプを更新しました",typeDeleted:"メンテナンスタイプを削除しました",defaultsRestored:"デフォルトタスクを{{count}}件復元しました",printHoursUpdated:"印刷時間を更新しました",printerAssigned:"プリンターを割り当てました",printerRemoved:"プリンターを削除しました",deleteTypeConfirm:"「{{name}}」を削除しますか？",deleteSystemTypeTitle:"デフォルトのメンテナンスタスクを削除しますか？",deleteSystemTypeMessage:"デフォルトのメンテナンスタスク「{{name}}」を削除してもよろしいですか？",noPermissionUpdate:"メンテナンス記録を更新する権限がありません",noPermissionPerform:"メンテナンスを実行する権限がありません",noPermissionEditTypes:"メンテナンスタイプを編集する権限がありません",noPermissionDeleteTypes:"メンテナンスタイプを削除する権限がありません",noPermissionEditHours:"メンテナンス時間を編集する権限がありません",noPermissionRemovePrinter:"プリンターの割り当てを解除する権限がありません",noPermissionAssignPrinter:"プリンターを割り当てる権限がありません",noPermissionEditIntervals:"メンテナンス間隔を編集する権限がありません",configureSettings:"メンテナンスタイプと間隔を設定"},settings:{title:"設定",general:"一般",tabs:{general:"一般",smartPlugs:"スマートプラグ",notifications:"通知",queue:"ワークフロー",filament:"フィラメント",network:"ネットワーク",apiKeys:"APIキー",virtualPrinter:"仮想プリンター",spoolbuddy:"SpoolBuddy",failureDetection:"失敗検出",users:"認証",backup:"バックアップ",emailAuth:"メール認証",ldap:"LDAP",twoFa:"二段階認証",oidc:"SSO / OIDC",security:"セキュリティ"},spoolbuddy:{infoTitle:"SpoolBuddy デバイス",infoBody:"SpoolBuddy キオスクはハートビートにより自動的に登録されます。使用されなくなった場合や、デーモンのクラッシュにより古い重複が残った場合は、ここでデバイスの登録を解除してください。",duplicatesTitle:"{{count}} 台のデバイスが登録されています",duplicatesBody:"キオスク UI は最初に登録されたデバイスのみを使用します。クラッシュによる古い重複がある場合は登録解除してください。オンラインのデバイスは次回のハートビートで自動的に再登録されます。",empty:"SpoolBuddy デバイスはまだ登録されていません。",online:"オンライン",offline:"オフライン",unregister:"登録解除",unregisterSuccess:"デバイスの登録を解除しました",unregisterError:"デバイスの登録解除に失敗しました",confirmTitle:"SpoolBuddy デバイスの登録を解除しますか？",confirmBody:"「{{hostname}}」（{{deviceId}}）をデータベースから削除します。デバイスがオンラインの場合、次回のハートビートで自動的に再登録されます。",ipAddress:"IPアドレス",firmware:"ファームウェア",lastSeen:"最終接続",daemonUptime:"デーモン稼働時間",systemUptime:"システム稼働時間",never:"なし",nfc:"NFC",scale:"計量器",cpuTemp:"CPU 温度",cpuLoad:"CPU 負荷",memory:"メモリ",disk:"ディスク",update:"アップデート",updateConfirmTitle:"Spoolbuddyデーモンを更新しますか？",updateConfirmBody:'"{{hostname}}"のソフトウェア更新を実行しますか？更新後にデーモンが再起動されます。',restartBrowser:"ブラウザを再起動",restartBrowserConfirmTitle:"キオスクブラウザを再起動しますか？",restartBrowserConfirmBody:'"{{hostname}}"のキオスクブラウザを再起動しますか？画面が一時的に消えます。',restartDaemon:"デーモンを再起動",restartDaemonConfirmTitle:"Spoolbuddyデーモンを再起動しますか？",restartDaemonConfirmBody:'"{{hostname}}"のSpoolbuddyデーモンを再起動しますか？デバイスが数秒間オフラインになります。',reboot:"再起動",rebootConfirmTitle:"デバイスを再起動しますか？",rebootConfirmBody:'"{{hostname}}"を再起動しますか？デバイスは約1分間オフラインになります。',shutdown:"シャットダウン",shutdownConfirmTitle:"デバイスをシャットダウンしますか？",shutdownConfirmBody:'"{{hostname}}"をシャットダウンしますか？再起動には物理的なアクセスが必要です。',commandConfirm:"確認",commandQueued:"コマンドをキューに追加しました",commandError:"コマンドの送信に失敗しました"},ldap:{title:"LDAP認証",enabledDesc:"LDAP認証が有効です",disabledDesc:"LDAP認証が無効です",disabledHint:"以下のLDAP設定を構成して保存し、有効にしてください。",enabled:"LDAP認証を有効にしました",disabled:"LDAP認証を無効にしました",feature1:"LDAP資格情報でログインできます",feature2:"ローカル管理者アカウントはフォールバックとして残ります",feature3:"ログイン時にLDAPグループがBamBuddyグループにマッピングされます",serverConfig:"LDAPサーバー設定",serverUrl:"サーバーURL",serverUrlHint:"標準はldap://、SSL接続はldaps://を使用",security:"セキュリティ",securityHint:"StartTLSはプレーン接続をTLSにアップグレードします。LDAPSは最初からTLSを使用します。",bindDn:"バインドDN（サービスアカウント）",bindPassword:"バインドパスワード",searchBase:"検索ベースDN",userFilter:"ユーザー検索フィルター",userFilterHint:"{username}はログインユーザー名に置き換えられます。OpenLDAPの場合は(uid={username})を使用。",advanced:"詳細設定",autoProvision:"ユーザー自動作成",autoProvisionHint:"初回LDAPログイン時にBamBuddyアカウントを自動作成",defaultGroup:"デフォルトグループ",defaultGroupNone:"— なし（フォールバックなし）—",defaultGroupHint:"LDAPユーザーが認証されたがマッピングされたLDAPグループに属していない場合に割り当てられるフォールバックグループ。空欄の場合、マッピングされていないユーザーは権限なしのままになります。",groupMapping:"グループマッピング（JSON）",groupMappingHint:"LDAPグループDNをBamBuddyグループにマッピング。利用可能なグループ: ",testConnection:"接続テスト",settingsSaved:"LDAP設定を保存しました",errors:{serverRequired:"LDAPサーバーURLは必須です",searchBaseRequired:"検索ベースDNは必須です",enableAuthFirst:"先に認証を有効にしてください",configureLdapFirst:"先にLDAP設定を保存してください"}},email:{smtpSettings:"SMTP設定",smtpHost:"SMTPサーバー",smtpPort:"SMTPポート",security:"セキュリティ",authentication:"認証",username:"ユーザー名",password:"パスワード",fromEmail:"送信元メールアドレス",fromName:"送信者名",testConnection:"SMTP接続テスト",testRecipient:"テスト受信者メール",sendTest:"テストメール送信",sending:"送信中...",save:"設定を保存",saving:"保存中...",advancedAuth:"高度な認証",advancedAuthEnabled:"高度な認証が有効です",advancedAuthEnabledDesc:"メールベースのユーザー管理機能が有効になっています。新規ユーザーには自動生成されたパスワードがメールで送信され、ユーザーはパスワード忘れ機能でパスワードをリセットできます。",advancedAuthDisabled:"高度な認証が無効です",advancedAuthDisabledDesc:"高度な認証を有効にして、ユーザー管理のメールベース機能を有効化してください。",enable:"有効にする",disable:"無効にする",feature1:"パスワードは自動生成され、新規ユーザーにメールで送信されます",feature2:"ユーザーはユーザー名またはメールでログインできます",feature3:"パスワード忘れ機能が利用可能です",feature4:"管理者はメールでユーザーパスワードをリセットできます",errors:{requiredFields:"すべての必須フィールドに入力してください",usernameRequired:"認証が有効な場合、ユーザー名は必須です",enterTestEmail:"テストメールアドレスを入力してください",smtpServerAndEmail:"テストする前にSMTPサーバーと送信元メールを入力してください",usernamePasswordRequired:"認証が有効な場合、ユーザー名とパスワードは必須です",configureSmtpFirst:"最初にSMTP設定を構成してテストしてください",enableAuthFirst:"メール関連機能をご利用いただくには、まず認証を有効にしてください。"},success:{settingsSaved:"SMTP設定を保存しました"},securityOptions:{starttls:"STARTTLS (ポート 587)",ssl:"SSL/TLS (ポート 465)",none:"なし (ポート 25)"},authOptions:{enabled:"有効",disabled:"無効"}},appearance:"外観",notifications:"通知",smartPlugs:"スマートプラグ",spoolman:"Spoolman",updates:"アップデート",language:"言語",languageDescription:"表示言語を選択してください",theme:"テーマ",themeLight:"ライト",themeDark:"ダーク",themeSystem:"システム設定に従う",defaultView:"デフォルト画面",defaultViewDescription:"アプリ起動時に表示するページ",checkForUpdates:"アップデートを確認",autoUpdate:"自動アップデート",currentVersion:"現在のバージョン",latestVersion:"最新バージョン",upToDate:"最新です",updateAvailable:"アップデートあり",notificationLanguage:"通知の言語",notificationLanguageDescription:"プッシュ通知の言語",bedCooledThreshold:"ベッド冷却しきい値",bedCooledThresholdDescription:"印刷後にベッドが冷却されたと見なす温度",userNotificationsEnabled:"ユーザー通知",userNotificationsEnabledDescription:"ユーザー通知メニューと印刷ジョブイベントのメール通知を有効にします。高度な認証が必要です。",userNotificationsDisabledHint:"ユーザー通知を使用するには高度な認証を有効にしてください。",notificationProviders:"通知プロバイダー",addProvider:"プロバイダーを追加",editProvider:"プロバイダーを編集",providerType:"プロバイダーの種類",testNotification:"テスト通知",testSuccess:"テスト通知を送信しました",testFailed:"テスト通知の送信に失敗しました",quietHours:"おやすみ時間",quietHoursDescription:"この時間帯は通知を送信しません",quietHoursStart:"開始",quietHoursEnd:"終了",events:{title:"通知イベント",printStart:"印刷開始",printComplete:"印刷完了",printFailed:"印刷失敗",printStopped:"印刷中止",printProgress:"進捗マイルストーン",printProgressDescription:"25%, 50%, 75%で通知",printerOffline:"プリンターオフライン",printerError:"プリンターエラー",filamentLow:"フィラメント残量低下",maintenanceDue:"メンテナンス期限",maintenanceDueDescription:"メンテナンスが必要なときに通知"},smartPlug:{title:"スマートプラグ",add:"スマートプラグを追加",edit:"スマートプラグを編集",name:"名前",ipAddress:"IPアドレス",linkedPrinter:"連携プリンター",autoOn:"自動電源オン",autoOnDescription:"印刷開始時に電源を入れる",autoOff:"自動電源オフ",autoOffDescription:"印刷完了後に電源を切る",offDelay:"オフ遅延",offDelayMinutes:"印刷後の待機時間（分）",offDelayTemp:"ノズル温度が下回ったとき",currentState:"現在の状態",turnOn:"電源オン",turnOff:"電源オフ"},filamentTracking:"フィラメント追跡",filamentTrackingDesc:"フィラメントスプールの追跡方法を選択してください。内蔵インベントリまたは外部Spoolmanサーバーを使用できます。",filamentChecks:"フィラメントチェック",disableFilamentWarnings:"フィラメント警告を無効化",disableFilamentWarningsDesc:"印刷またはキュー追加時にフィラメント不足の警告を表示しない",preferLowestFilament:"残量が少ないフィラメントを優先",preferLowestFilamentDesc:"複数のスプールが一致する場合、残量が最も少ないものを使用します",trackingModeBuiltIn:"内蔵インベントリ",trackingModeBuiltInDesc:"RFID自動検出と使用量追跡を含む",trackingModeSpoolmanDesc:"外部フィラメント管理サーバー",builtInFeatureRfid:"AMS内のBambu Lab RFIDスプールを自動検出",builtInFeatureUsage:"プリントごとのフィラメント消費量を追跡",builtInFeatureCatalog:"スプール、カラー、K値プロファイルを管理",builtInFeatureThirdParty:"サードパーティ製スプールをインベントリスプールに割り当て可能",amsSyncButton:"AMSから重量を同期",amsSyncTitle:"AMSからスプール重量を同期",amsSyncMessage:"接続されたプリンターの現在のAMS残量値で、すべてのインベントリスプール重量を上書きします。破損した重量データの復旧に使用してください。プリンターがオンラインである必要があります。",amsSyncing:"同期中...",amsSyncSuccess:"{{synced}}個のスプールを同期、{{skipped}}個をスキップ",amsSyncError:"AMSからの重量同期に失敗しました",spoolmanAmsSyncButton:"AMSからSpoolmanの重量を同期",spoolmanAmsSyncTitle:"AMSからSpoolmanスプール重量を同期",spoolmanAmsSyncMessage:"接続されたプリンターの現在のAMS残量値に基づいて、すべてのSpoolmanスプール重量を更新します。プリンターがオンラインである必要があります。",spoolmanAmsSyncing:"同期中...",spoolmanAmsSyncSuccess:"{{synced}}個のSpoolmanスプールを同期、{{skipped}}個をスキップ",spoolmanAmsSyncError:"AMSからのSpoolman重量同期に失敗しました",spoolmanAmsSyncErrorUnreachable:"同期失敗（Spoolmanに接続できません）",spoolmanAmsSyncErrorNotConfigured:"同期失敗（Spoolmanが設定されていません）",spoolmanNotConfigured:"Spoolmanが設定されていません",spoolmanFilamentCatalogTitle:"Spoolmanフィラメントカタログ",spoolmanFilamentCatalogDesc:"Spoolmanインスタンスのフィラメント名と風袋重量。名前とスプール重量はここで編集できます。その他の属性はSpoolmanで直接管理してください。",spoolmanUrl:"Spoolman URL",spoolmanUrlHint:"Spoolmanサーバーのurl（例：http://localhost:7912）",spoolmanConnected:"接続中",spoolmanDisconnected:"未接続",status:"ステータス",connect:"接続",disconnect:"切断",howSyncWorks:"同期の仕組み",syncInfoRfidOnly:"RFIDを搭載した公式Bambu Labスプールのみ同期されます",syncInfoAutoCreate:"新しいスプールは初回同期時にSpoolmanに自動作成されます",syncInfoThirdPartySkipped:"Bambu Lab以外のスプール（サードパーティ、リフィル）はスキップされます",linkingExistingSpools:"既存スプールのリンク",linkingExistingSpoolsDesc:"既存のSpoolmanスプールをAMSにリンクするには、AMSスロットにカーソルを合わせて「Spoolmanにリンク」をクリックしてください。",syncMode:"同期モード",syncModeAuto:"自動",syncModeManual:"手動のみ",syncModeAutoDesc:"変更が検出されるとAMSデータが自動的に同期されます",syncModeManualDesc:"手動でトリガーした場合のみ同期",syncAmsData:"AMSデータを同期",syncAmsDataDesc:"プリンターのAMSデータをSpoolmanに手動同期",allPrinters:"全プリンター",noDefaultPrinter:"デフォルトなし（毎回選択）",sidebarOrder:"サイドバーの順序",saveThumbnails:"サムネイルを保存",captureFinishPhoto:"完了写真を撮影",noPrintersConfigured:"プリンターが設定されていません",archiveMode:{always:"常にアーカイブを作成",never:"アーカイブを作成しない",ask:"毎回確認"},checkForUpdatesLabel:"アップデートを確認",checkPrinterFirmware:"プリンターファームウェアの確認",includeBetaUpdates:"ベータ版を含める",includeBetaUpdatesDesc:"アップデート確認時にベータ版およびプレリリース版を通知する",enableRetry:"リトライを有効化",homeAssistantDescription:"Home Assistantに接続してHA REST APIでスマートプラグを制御します。switch、light、input_booleanエンティティに対応しています。",environmentManagedLabel:"(環境変数で管理)",autoEnabledViaEnv:"環境変数により自動的に有効化されました",urlFromEnvReadOnly:"HA_URL環境変数で設定された値（読み取り専用）",tokenFromEnvReadOnly:"HA_TOKEN環境変数で設定された値（読み取り専用）",mqttConnectedTo:"接続先:",prometheusDescription:"プリンターデータをPrometheus形式で公開",noSmartPlugsTitle:"スマートプラグが設定されていません",noSmartPlugsDescription:"Tasmotaベースのスマートプラグを追加して、エネルギー消費を追跡し、電源制御を自動化します。",noProvidersTitle:"プロバイダーが設定されていません",noProvidersDescription:"アラートを受信するにはプロバイダーを追加してください。",noTemplatesAvailable:"テンプレートがありません。バックエンドを再起動してデフォルトテンプレートを生成してください。",apiPermissionView:"プリンターステータスとキューを表示",apiPermissionEdit:"印刷キューにアイテムを追加・削除",apiKeysEmptyTitle:"APIキーがありません",apiKeysEmptyDescription:"外部サービスと連携するためのAPIキーを作成してください。",noUsersFound:"ユーザーが見つかりません",noGroupsFound:"グループが見つかりません",noGroupsAvailable:"利用可能なグループがありません",passwordsDoNotMatch:"パスワードが一致しません",systemGroupWarning:"システムグループ名は変更できません",authDisabledTitle:"認証が無効です",authDisabledFeature1:"システムへのアクセスにログインを要求",authDisabledFeature2:"グループベースの権限で複数ユーザーを作成",authDisabledFeature3:"50以上のきめ細かな権限でアクセスを制御",userHasCreated:"このユーザーは以下を作成しています：",userItemsQuestion:"これらのアイテムをどうしますか？",deleteUserConfirm:"このユーザーを削除してもよろしいですか？この操作は元に戻せません。",actionCannotBeUndone:"この操作は元に戻せません",addFirstSmartPlug:"最初のスマートプラグを追加",providers:"プロバイダー",log:"ログ",testAll:"すべてテスト",testResults:"テスト結果",testPassedCount:"{{count}}件成功",testFailedCount:"{{count}}件失敗",messageTemplates:"メッセージテンプレート",messageTemplatesDescription:"各イベントの通知メッセージをカスタマイズ。",apiKeys:"APIキー",apiKeysDescription:"外部連携やWebhook用のAPIキーを作成します。",createKey:"キーを作成",apiKeyCreated:"APIキーを作成しました",apiKeyCopyWarning:"今すぐこのキーをコピーしてください - 再表示されません！",useInApiBrowser:"APIブラウザーで使用",createNewApiKey:"新しいAPIキーを作成",keyName:"キー名",keyNamePlaceholder:"例: Home Assistant, OctoPrint",readStatus:"ステータスの読み取り",readStatusDescription:"プリンターのステータスとキューを表示",manageQueue:"キューの管理",manageQueueDescription:"印刷キューへのアイテムの追加と削除",controlPrinter:"プリンターの制御",controlPrinterDescription:"印刷の一時停止、再開、停止",manageLibrary:"ライブラリの管理",manageLibraryDescription:"ライブラリファイルのアップロード、名前変更、削除。MakerWorld からのモデルインポート。",manageInventory:"在庫の管理",manageInventoryDescription:"スプールと在庫レコードの作成、更新、削除。SpoolBuddy キオスク（NFC スキャン、はかり読み取り、キオスクのシステムコマンド）に必要です。",libraryBadge:"ライブラリ",inventoryBadge:"在庫",cloudAccess:"クラウドアクセスを許可",cloudAccessDescription:"Bambu Cloudのプリセットとフィラメントを代わりに読み込みます。Bambu Cloudへのサインインが必要です。",cloudBadge:"クラウド",updateEnergyCost:"電気料金を更新",updateEnergyCostDescription:"このキーが /settings/electricity-price に新しいkWhごとの電気料金をPOSTすることを許可。Home Assistantの動的料金自動化（Tibber、Octopusなど）に便利。これはAPIキーで書き込み可能な唯一の設定フィールドです。",energyCostBadge:"電力",legacyKey:"レガシー",legacyKeyTooltip:"ユーザー所有以前に作成 - クラウドアクセスには再作成が必要",unnamedKey:"名前なしキー",lastUsed:"最終使用:",read:"読み取り",control:"制御",createFirstKey:"最初のキーを作成",webhookEndpoints:"Webhookエンドポイント",webhookApiKeyHint:"X-API-KeyヘッダーでAPIキーを使用してください。",webhook:{getAllStatus:"全プリンターステータスを取得",getSpecificStatus:"特定のプリンターステータスを取得",addToQueue:"印刷キューに追加",pausePrint:"印刷を一時停止",resumePrint:"印刷を再開",stopPrint:"印刷を停止"},apiBrowser:"APIブラウザ",apiBrowserDescription:"すべての利用可能なAPIエンドポイントを探索してテストします。",apiKeyForTesting:"テスト用APIキー",apiKeyPlaceholder:"CallMeBot APIキー",apiKeyHint:"このキーはX-API-Keyヘッダーとしてリクエストに送信されます。",deleteApiKeyTitle:"APIキーを削除",deleteApiKeyMessage:"このAPIキーを削除してもよろしいですか？このキーを使用しているすべての連携が動作しなくなります。",deleteKey:"キーを削除",amsDisplayThresholds:"AMS表示しきい値",amsThresholdsDescription:"AMS湿度と温度インジケーターの色しきい値を設定します。",humidity:"湿度",goodGreen:"良好（緑）≤",fairOrange:"普通（オレンジ）≤",aboveFairBad:"普通のしきい値以上は赤（悪い）で表示",fairAlsoDryingThreshold:"このしきい値は自動乾燥のトリガーにも使用されます",temperature:"温度",goodBlue:"良好（青）≤",aboveFairHot:"普通のしきい値以上は赤（高温）で表示",historyRetention:"履歴の保持",keepSensorHistory:"センサー履歴の保持期間",historyRetentionDescription:"古い湿度と温度データは自動的に削除されます",defaultPrintOptions:"デフォルト印刷オプション",defaultPrintOptionsDescription:"新しい印刷のデフォルト値を設定します。印刷ダイアログで個別に変更できます。",defaultBedLevelling:"ベッドレベリング",defaultBedLevellingDesc:"印刷前にベッドを自動レベリング",defaultFlowCali:"フローキャリブレーション",defaultFlowCaliDesc:"押出フローのキャリブレーション",defaultVibrationCali:"振動キャリブレーション",defaultVibrationCaliDesc:"リンギングアーティファクトを低減",defaultLayerInspect:"第1層検査",defaultLayerInspectDesc:"AIによる第1層の検査",defaultTimelapse:"タイムラプス",defaultTimelapseDesc:"タイムラプス動画を記録",staggeredStart:"段階的開始",staggeredStartDescription:"複数プリンターのバッチ開始を段階的に行う際のデフォルトのグループサイズと間隔。プリントモーダルでバッチごとに上書き可能。",plateClear:"プレートクリア確認",requirePlateClear:"プレートクリア確認を必須にする",requirePlateClearDescription:"有効にすると、スケジューラーは完了したプリンターでキューの印刷を開始する前に、プリンターごとのプレートクリア確認を待ちます。無効にすると、プリンターカード上のプレート状態バッジと「プレートをクリア済みにする」ボタンも非表示になります。",gcodeInjection:"G-codeインジェクション",gcodeInjectionDescription:"Farmloop、SwapMod、AutoClear、Printflow 3Dなどの自動印刷システム用に、印刷の開始と終了時にカスタムG-codeを挿入します。スニペットはプリンターモデルごとに設定し、キューアイテム��「G-codeを挿入」を有効にすると適用されます。",gcodeInjectionNoPrinters:"プリンターが見つかりません。G-codeスニペットを設定するにはプリンターを追加してください。",gcodeStartLabel:"開始G-code",gcodeEndLabel:"終了G-code",gcodeStartPlaceholder:"印刷開始前に挿入されるG-code...",gcodeEndPlaceholder:"印刷終了後に追加されるG-code...",staggerGroupSize:"グループサイズ",staggerGroupSizeHelp:"グループあたり同時に開始するプリンター数",staggerInterval:"間隔（分）",staggerIntervalHelp:"各グループ開始までの遅延",queueDrying:"自動乾燥",queueDryingDescription:"キュー印刷の合間にプリンターがアイドル状態の時、AMSフィラメントを自動的に乾燥します。上記の湿度しきい値を使用します。",queueDryingEnabled:"自動乾燥を有効にする",queueDryingEnabledDescription:"プリンターがアイドル状態で湿度がしきい値を超えた場合、AMS乾燥を自動的に開始",queueDryingBlock:"乾燥完了まで待機",queueDryingBlockDescription:"乾燥が完了するまで印刷キューをブロックします。オフの場合、印刷が優先されます。",ambientDryingEnabled:"常時乾燥",ambientDryingEnabledDescription:"キューに関係なく、アイドル状態のプリンターで湿度がしきい値を超えた場合に自動的にフィラメントを乾燥。",dryingPresets:"乾燥プリセット",dryingPresetsDescription:"フィラメントタイプごとの温度と時間。AMS 2 Proは低温、AMS-HTは高温に対応。",dryingFilament:"フィラメント",printModal:"印刷ダイアログ",expandCustomMapping:"カスタムマッピングをデフォルトで展開",expandCustomMappingDescription:"複数プリンターに印刷する際、プリンターごとのAMSマッピングを展開表示",authentication:"認証",authEnabledDescription:"ユーザー認証でインスタンスが保護されています",authDisabledDescription:"認証を有効にして、ユーザーアカウントの作成、権限の管理、Bambuddyインスタンスのセキュリティを確保しましょう。",authDisabledMessage:"認証を有効にして、ユーザーアカウントの作成、権限の管理、Bambuddyインスタンスのセキュリティを確保しましょう。",enableAuthentication:"認証を有効にする",currentUser:"現在のユーザー",changePassword:"パスワードを変更",admin:"管理者",users:"ユーザー",addUser:"ユーザーを追加",groups:"グループ",addGroup:"グループを追加",system:"システム",noDescription:"説明なし",userCount:"{{count}}人のユーザー",permissionCount:"{{count}}件の権限",createUser:"ユーザーを作成",username:"ユーザー名",enterUsername:"ユーザー名を入力",password:"パスワード",enterPassword:"パスワードを入力",passwordRequirements:"大文字、小文字、数字、特殊文字を各1文字以上含む8文字以上。",confirmPassword:"パスワードの確認",confirmPasswordPlaceholder:"パスワードを確認",viewReleaseOnGitHub:"GitHubでリリースを表示",turnAllPlugsOn:"すべてのプラグをオン",turnAllPlugsOff:"すべてのプラグをオフ",clearNotificationLogs:"通知ログをクリア",clearLogsMessage:"30日以上前のすべての通知ログを完全に削除します。この操作は元に戻せません。",clearLogs:"通知ログを削除",resetUiPreferences:"UI設定をリセット",resetUiPreferencesMessage:"すべてのUI設定をデフォルトにリセットします：サイドバー順序、テーマ、ダッシュボードレイアウト、表示モード、ソート設定。プリンター、アーカイブ、サーバー設定は影響を受けません。クリア後にページがリロードされます。",resetPreferences:"設定をリセット",deleteGroupTitle:"グループを削除",deleteGroupMessage:"このグループを削除しますか？このグループのユーザーはこれらの権限を失います。",deleteGroup:"グループを削除",disableAuthenticationTitle:"認証を無効化",disableAuthenticationMessage:"認証を無効にしますか？Bambuddyインスタンスにログインなしでアクセスできるようになります。ユーザーはデータベースに残りますが、認証は無効になります。",disableAuthentication:"認証を無効化",configureBambuddy:"Bambuddyを設定",systemDefault:"システムデフォルト",archiveSettings:"アーカイブ設定",newWindow:"新しいウィンドウ",embeddedOverlay:"埋め込みオーバーレイ",preferredSlicer:"優先スライサー",preferredSlicerDescription:"ファイルを開くスライサーアプリケーションを選択",orcaslicerKnownIssuesWarning:"OrcaSlicer 2.3.2 / 2.4.0-devには、Bambu作成の3MFの多くをスライスできない既知のCLIバグがあります — 上流イシュー#12426（ペイント済みマルチエクストルーダーファイルでのsegfault）および#13386（パラメータ範囲の厳格検証拒否）を参照。上流の修正がリリースされるまで、Bambu Studioを推奨します。",useSlicerApi:"スライサーAPIを使用",useSlicerApiDescription:"オンの場合、「Slice」アクションはアプリ内スライサーモーダルを開き、slicer-APIサイドカーを呼び出します。オフ（デフォルト）の場合、URIスキーム経由でデスクトップスライサーに引き継がれます。",slicerCard:"スライサー",orcaslicerApiUrl:"OrcaSlicer sidecar URL",bambuStudioApiUrl:"Bambu Studio sidecar URL",slicerApiUrlDescription:"slicer-APIサイドカーコンテナのURL。空のままにすると SLICER_API_URL / BAMBU_STUDIO_API_URL 環境変数のデフォルト値が使用されます。",slicerBundles:{title:"スライサーバンドル",description:'BambuStudioからエクスポートされたPrinter Preset Bundle（.bbscfg）をインポートします（ファイル → エクスポート → プリセットバンドルをエクスポート → "Printer preset bundle"）。インポート後、スライス要求はJSONプロファイルトリプレットを再アップロードせずにバンドルから名前でプリセットを選択できます。',uploadButton:"バンドルをアップロード",uploading:"アップロード中…",loading:"バンドルを読み込み中…",empty:"バンドルはまだインポートされていません。",summary:"{{processCount}}プロセス · {{filamentCount}}フィラメントプリセット",delete:"削除",uploadSuccess:"{{name}}をインポート済み",uploadError:"バンドルのアップロードに失敗: {{message}}",deleteSuccess:"バンドルを削除しました",deleteError:"バンドルの削除に失敗: {{message}}",confirmDeleteTitle:"このバンドルを削除しますか？",confirmDeleteMessage:"「{{name}}」を参照するスライス要求は、バンドルを再インポートするまで失敗します。"},externalCameras:"外部カメラ",costTracking:"コスト追跡",printsOnly:"印刷のみ",totalConsumption:"総消費量",dataManagement:"データ管理",storageUsage:"ストレージ使用量",storageUsageDescription:"カテゴリ別のデータ使用量の内訳",storageUsageTotal:"合計",storageUsageErrors:"エラー",storageUsageOtherBreakdown:"その他（静的アセット、スクリプト、設定ファイルを含む）",storageUsageSystem:"システム",storageUsageData:"データ",storageUsageUnavailable:"ストレージ使用量情報は利用できません",clearNotificationLogsDescription:"30日以上前の通知ログを削除",resetUiPreferencesDescription:"サイドバー順序、テーマ、表示モード、レイアウト設定をリセット。プリンター、アーカイブ、設定は影響を受けません。",enableHomeAssistant:"Home Assistantを有効化",enableMqtt:"MQTTを有効化",useTls:"TLSを使用",enableMetricsEndpoint:"メトリクスエンドポイントを有効化",availableMetrics:"利用可能なメトリクス",editUser:"ユーザーを編集",deleteUserTitle:"ユーザーを削除",groupName:"グループ名",leaveEmptyForAnonymous:"匿名の場合は空のまま",leaveEmptyForNoAuth:"認証なしの場合は空のまま",enterNewPassword:"新しいパスワードを入力",confirmNewPassword:"新しいパスワードを確認",enterGroupName:"グループ名を入力",enterDescriptionOptional:"説明を入力（任意）",enterCurrentPassword:"現在のパスワードを入力",enterNewPasswordMin6:"新しいパスワードを入力（6文字以上）",toast:{keyCopied:"キーをクリップボードにコピーしました",copyFailed:"キーのコピーに失敗しました",keyAddedToBrowser:"キーをAPIブラウザに追加しました",clearLogsFailed:"ログの削除に失敗しました",uiPreferencesReset:"UI設定をリセットしました。更新中...",authDisabled:"認証を無効にしました",authDisableFailed:"認証の無効化に失敗しました",apiKeyCreated:"APIキーを作成しました",apiKeyDeleted:"APIキーを削除しました",userCreated:"ユーザーが正常に作成されました",userUpdated:"ユーザーが正常に更新されました",userDeleted:"ユーザーが正常に削除されました",groupCreated:"グループを作成しました",groupUpdated:"グループを更新しました",groupDeleted:"グループを削除しました",fillRequiredFields:"必須項目をすべて入力してください",passwordsDoNotMatch:"パスワードが一致しません",passwordTooShort:"パスワードは8文字以上必要です",passwordNeedsUppercase:"パスワードには少なくとも1つの大文字を含める必要があります",passwordNeedsLowercase:"パスワードには少なくとも1つの小文字を含める必要があります",passwordNeedsDigit:"パスワードには少なくとも1つの数字を含める必要があります",passwordNeedsSpecial:"パスワードには少なくとも1つの特殊文字を含める必要があります",enterGroupName:"グループ名を入力",settingsSaved:"設定を保存しました",noPermissionUpdate:"設定を変更する権限がありません",cameraSettingsSaved:"カメラ設定を保存しました",enterCameraUrl:"カメラURLを入力してください",passwordChanged:"パスワードが正常に変更されました",connectionFailed:"接続失敗",testFailed:"テスト通知の送信に失敗しました",cameraConnected:"カメラ接続{{resolution}}"},testConnection:"接続テスト",catalog:{spoolCatalog:"スプールカタログ",spoolCatalogDescription:"ブランド/タイプ別の空スプール重量。スプール追加時の自動重量検索に使用されます。",searchCatalog:"カタログを検索...",addNewEntry:"新しいエントリを追加",namePlaceholder:"名前（例：Bambu Lab - プラスチック）",weight:"重量",type:"タイプ",default:"デフォルト",custom:"カスタム",noMatch:"検索に一致するエントリがありません",empty:"カタログにエントリがありません",deleteEntry:"エントリを削除",deleteConfirm:"「{{name}}」を削除してもよろしいですか？",resetCatalog:"カタログをリセット",resetConfirm:"カタログをデフォルトにリセットしますか？カスタムエントリはすべて削除されます。",loadFailed:"スプールカタログの読み込みに失敗しました",nameWeightRequired:"名前と重量は必須です",entryAdded:"エントリを追加しました",addFailed:"エントリの追加に失敗しました",entryUpdated:"エントリを更新しました",updateFailed:"エントリの更新に失敗しました",entryDeleted:"エントリを削除しました",deleteFailed:"エントリの削除に失敗しました",resetSuccess:"カタログをデフォルトにリセットしました",resetFailed:"カタログのリセットに失敗しました",exported:"{{count}}件のエントリをエクスポートしました",imported:"{{added}}件のエントリをインポートしました（{{skipped}}件スキップ）",importFailed:"インポートに失敗しました：無効なJSON形式",exportTooltip:"カタログをJSONにエクスポート",importTooltip:"JSONからカタログをインポート",resetTooltip:"デフォルトにリセット",selectedCount:"{{count}}件選択中",deleteSelected:"選択を削除",bulkDeleteConfirm:"{{count}}件のエントリーを削除してもよろしいですか？",bulkDeleted:"{{count}}件のエントリーを削除しました",bulkDeleteFailed:"エントリーの削除に失敗しました",material:"材料",spoolWeight:"スプール重量",color:"色",updateSpoolWeight:"スプール重量を更新",filamentUpdated:"フィラメントを更新しました",filamentUpdateFailed:"フィラメントの更新に失敗しました",filamentUpdateInvalid:"フィラメントデータが無効です",keepExistingSpoolWeight:"既存スプールの旧重量を保持",keepExistingSpoolWeightDesc:"このフィラメントタイプで既に作成されたスプールは旧風袋重量を保持します。新しいスプールは更新後の値を使用します。",applyToAllSpools:"全スプールに適用",applyToAllSpoolsDesc:"このフィラメントタイプの全重量計算に新しい風袋重量が即座に適用されます。"},colorCatalog:{title:"カラーカタログ",description:"メーカー/素材別のフィラメントカラー。スプール追加時の自動カラー検索に使用されます。",searchColors:"カラーを検索...",allManufacturers:"すべてのメーカー",addNewColor:"新しいカラーを追加",manufacturer:"メーカー",colorName:"カラー名",hex:"16進数",materialOptional:"素材（任意）",showing:"{{total}}件中{{filtered}}件を表示",noMatch:"検索に一致するカラーがありません",empty:"カタログにカラーがありません",deleteColor:"カラーを削除",deleteConfirm:"「{{name}}」を削除してもよろしいですか？",resetCatalog:"カラーカタログをリセット",resetConfirm:"カタログをデフォルトにリセットしますか？カスタムカラーはすべて削除されます。",sync:"同期",starting:"開始中...",syncTooltip:"FilamentColors.xyzから同期（2000+カラー）",loadFailed:"カラーカタログの読み込みに失敗しました",fieldsRequired:"メーカー、カラー名、Hexカラーは必須です",colorAdded:"カラーを追加しました",addFailed:"カラーの追加に失敗しました",colorUpdated:"カラーを更新しました",updateFailed:"カラーの更新に失敗しました",colorDeleted:"カラーを削除しました",deleteFailed:"カラーの削除に失敗しました",resetSuccess:"カラーカタログをデフォルトにリセットしました",resetFailed:"カタログのリセットに失敗しました",syncUpToDate:"最新の状態です（{{count}}件のカラーを確認）",syncComplete:"{{added}}件の新しいカラーを追加しました（{{skipped}}件は既に存在）",syncError:"同期エラー",syncFailed:"FilamentColors.xyzからの同期に失敗しました",exported:"{{count}}件のカラーをエクスポートしました",imported:"{{added}}件のカラーをインポートしました（{{skipped}}件スキップ）",importFailed:"インポートに失敗しました：無効なJSON形式",selectedCount:"{{count}}件選択中",deleteSelected:"選択を削除",bulkDeleteConfirm:"{{count}}件のカラーを削除してもよろしいですか？",bulkDeleted:"{{count}}件のカラーを削除しました",bulkDeleteFailed:"カラーの削除に失敗しました"},dateFormat:"日付形式",dateFormatUs:"米国 (MM/DD/YYYY)",dateFormatEu:"EU (DD/MM/YYYY)",dateFormatIso:"ISO (YYYY-MM-DD)",timeFormat:"時刻形式",timeFormat12:"12時間制 (3:30 PM)",timeFormat24:"24時間制 (15:30)",defaultPrinter:"デフォルトプリンター",defaultPrinterDescription:"アップロード、再印刷、その他の操作でこのプリンターを事前選択します。",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"サイドバーの項目をドラッグして並べ替え。ここでデフォルトの順序にリセット。",setDefault:"デフォルト設定",sidebarOrderSetDefaultHint:"デフォルト設定は、まだカスタマイズしていないユーザーに現在のメニュー順序を適用します。",sidebarDefaultSet:"デフォルトメニュー順序を設定しました。",sidebarDefaultCleared:"デフォルトメニュー順序をクリアしました。",sidebarDefaultFailed:"デフォルトメニュー順序の設定に失敗しました。",reset:"リセット",darkMode:"ダークモード",lightMode:"ライトモード",active:"(アクティブ)",background:"背景",accent:"アクセント",style:"スタイル",bgNeutral:"ニュートラル",bgWarm:"ウォーム",bgCool:"クール",bgOled:"OLEDブラック",bgSlate:"スレートブルー",bgForest:"フォレストグリーン",accentGreen:"グリーン",accentTeal:"ティール",accentBlue:"ブルー",accentOrange:"オレンジ",accentPurple:"パープル",accentRed:"レッド",styleClassic:"クラシック",styleGlow:"グロー",styleVibrant:"ビビッド",themeToggleHint:"サイドバーのアイコンでダーク、ライト、システムモードを切り替えます。",autoArchivePrints:"印刷を自動アーカイブ",autoArchiveDescription:"印刷完了時に3MFファイルを自動保存",saveThumbnailsDescription:"3MFファイルからプレビュー画像を抽出して保存",captureFinishPhotoDescription:"印刷完了時にプリンターカメラから写真を撮影",ffmpegNotInstalled:"ffmpegがインストールされていません",ffmpegRequired:"カメラ撮影にはffmpegが必要です。<brew>brew install ffmpeg</brew>（macOS）または<apt>apt install ffmpeg</apt>（Linux）でインストールしてください。",camera:"カメラ",cameraViewMode:"カメラ表示モード",cameraOverlayDescription:"メイン画面上にリサイズ可能なオーバーレイでカメラを表示",cameraWindowDescription:"別のブラウザウィンドウでカメラを表示",externalCamerasDescription:"内蔵プリンターカメラの代わりに外部カメラを設定。MJPEGストリーム、RTSP、HTTPスナップショット、USBカメラ（V4L2）をサポート。有効にすると、ライブビューと完了写真に外部カメラが使用されます。",cameraPlaceholderUsb:"デバイスパス (/dev/video0)",cameraPlaceholderUrl:"カメラURL (rtsp://... または http://...)",cameraTypeMjpeg:"MJPEGストリーム",cameraTypeRtsp:"RTSPストリーム",cameraTypeSnapshot:"HTTPスナップショット",cameraTypeUsb:"USBカメラ (V4L2)",cameraSnapshotUrl:"スナップショットURL（任意）",cameraSnapshotUrlPlaceholder:"http://192.168.1.61:1984/api/frame.jpeg?src=printer",cameraSnapshotUrlHelp:"通知サムネイル、終了写真、レイヤータイムラプスフレーム、プレート検出に使用される単一フレームURL。タイムラプスとプレート検出はそれぞれプリンターごとのトグルが必要 — このURLはアクティブ時の画像ソースに過ぎません。上記のライブストリームから取得する場合は空のままにします。go2rtc（/api/frame.jpeg）や専用スナップショットエンドポイントを持つIPカメラに便利です。",cameraRotation:"回転",test:"テスト",connected:"接続済み",disconnected:"未接続",currency:"通貨",defaultFilamentCost:"デフォルトフィラメントコスト（kg単価）",electricityCost:"電気料金（kWh単価）",energyDisplayMode:"エネルギー表示モード",energyModePrintDescription:"ダッシュボードに印刷中の消費エネルギーの合計を表示",energyModeTotalDescription:"ダッシュボードにスマートプラグの累計エネルギーを表示",fileManager:"ファイルマネージャー",createArchiveEntry:"印刷時にアーカイブエントリを作成",createArchiveEntryDescription:"ファイルマネージャーから印刷時に、オプションでアーカイブエントリを作成",lowDiskSpaceWarning:"ディスク容量不足の警告",lowDiskSpaceDescription:"空きディスク容量がこのしきい値を下回った場合に警告を表示",printerFirmware:"プリンターファームウェア",checkFirmwareDescription:"Bambu Labのプリンターファームウェア更新を確認",bambuddySoftware:"Bambuddyソフトウェア",autoCheckDescription:"起動時に自動的に新しいバージョンを確認",checkNow:"今すぐ確認",updateAvailableVersion:"アップデート利用可能: v{{version}}",releaseNotes:"リリースノート",updateViaDocker:"Docker Composeでアップデート:",updateViaHomeAssistant:"アップデートはHome Assistant Supervisorによって管理されます。Home Assistantの設定→アドオン→Bambuddyを開いて新しいバージョンをインストールしてください。",installUpdate:"アップデートをインストール",latestVersionRunning:"最新バージョンを使用しています",failedToCheckUpdates:"アップデートの確認に失敗しました: {{error}}",backupRestore:"バックアップと復元",backupRestoreDescription:"設定のエクスポート/インポートとGitHubバックアップの設定",goToBackup:"バックアップへ",externalUrl:"外部URL",externalUrlDescription:"Bambuddyがアクセス可能な外部URL。通知画像や外部連携に使用されます。",bambuddyUrl:"BambuddyのURL",externalUrlHint:"プロトコルとポートを含めてください（例: http://192.168.1.100:8000）",ftpRetry:"FTPリトライ",ftpRetryDescription:"プリンターのWi-Fiが不安定な場合にFTP操作をリトライ。3MFダウンロード、印刷アップロード、タイムラプスダウンロード、ファームウェア更新に適用。",autoRetryDescription:"失敗したFTP操作を自動的にリトライ",retryAttempts:"リトライ回数",retryDelay:"リトライ遅延",connectionTimeout:"接続タイムアウト",time_one:"{{count}}回",time_other:"{{count}}回",second_one:"{{count}}秒",second_other:"{{count}}秒",nSeconds:"{{count}}秒",increaseForWeakWifi:"Wi-Fiが弱いプリンター用に増やしてください",homeAssistant:"Home Assistant",homeAssistantFullDescription:"Home Assistantに接続してHA REST API経由でスマートプラグを制御。switch、light、input_boolean、scriptエンティティをサポート。",homeAssistantUrl:"Home Assistant URL",longLivedAccessToken:"長期アクセストークン",haTokenHint:"HAでトークンを作成: プロフィール → 長期アクセストークン → トークンを作成",connectionSuccessful:"接続成功",connectionFailed:"接続失敗",haConnectionSuccess:"Home Assistantへの接続に成功しました。",haConnectionFailed:"Home Assistantへの接続に失敗しました。",mqttPublishing:"MQTTパブリッシュ",mqttDescription:"Node-RED、Home Assistant、その他の自動化システムとの統合のため、外部MQTTブローカーにBamBuddyイベントをパブリッシュ。",mqttEnableDescription:"外部MQTTブローカーにイベントをパブリッシュ",brokerHostname:"ブローカーホスト名",port:"ポート",usernameOptional:"ユーザー名（オプション）",passwordOptional:"パスワード（オプション）",topicPrefix:"トピックプレフィックス",topicPrefixHint:"トピック形式: {{prefix}}/printers/<serial>/status 等",prometheusMetrics:"Prometheusメトリクス",prometheusEndpointDescription:"Prometheus/Grafanaモニタリング用に<code>/api/v1/metrics</code>でプリンターメトリクスを公開。",bearerTokenOptional:"Bearerトークン（オプション）",bearerTokenHint:"設定時、リクエストに<code>Authorization: Bearer <token></code>が必要",metricsConnectionStatus:"接続状態",metricsPrinterState:"プリンター状態（idle/printing等）",metricsPrintProgress:"印刷進捗 0-100%",metricsBedTemp:"ベッド温度",metricsNozzleTemp:"ノズル温度",metricsPrintsTotal:"結果別の総印刷数",metricsMore:"...その他（レイヤー、ファン、キュー、フィラメント使用量）",smartPlugsDescription:"スマートプラグ（TasmotaまたはHome Assistant）を接続して、電源制御の自動化とプリンターのエネルギー使用量を追跡。",allOn:"すべてオン",allOff:"すべてオフ",addSmartPlug:"スマートプラグを追加",energySummary:"エネルギー概要",currentPower:"現在の消費電力",plugsOnline:"{{reachable}}/{{total}}プラグオンライン",today:"今日",yesterday:"昨日",total:"合計",enablePlugsForSummary:"プラグを有効にしてエネルギー概要を表示",addNotificationProvider:"追加",systemBadge:"(システム)",creating:"作成中...",changing:"変更中...",deleteUserAndItems:"ユーザーとそのアイテムを削除",deleteUserKeepItems:"ユーザーを削除、アイテムは保持（オーナーなしになります）",ok:"OK",twoFa:{totpTitle:"認証アプリ (TOTP)",totpDesc:"Google Authenticator、Aegis、Authyなどのアプリを使用します。",emailOtpTitle:"メールOTP",emailOtpDesc:"ログイン時に{{email}}にワンタイムコードを送信します。",emailOtpNoEmail:"この方法を有効にするには、アカウントにメールアドレスを追加してください。",addEmailFirst:"アカウントにメールアドレスがありません。管理者に追加を依頼してください。",setupTotp:"認証アプリを設定",setupAuthApp:"認証アプリを設定",setupInstructions:"認証アプリでQRコードをスキャンし、コードで確認してください。",manualEntry:"スキャンできない場合は、このシークレットを手動で入力してください:",scannedContinue:"コードをスキャンしました — 続ける",enterCodeToConfirm:"認証アプリの6桁のコードを入力して設定を確認してください。",activate:"有効化",disableTotp:"認証アプリを無効化",disableConfirmHint:"認証アプリを無効にするには、有効なTOTPコードまたはバックアップコードを入力してください。",totpDisabled:"認証アプリが無効化されました。",emailOtpEnabled:"メールOTPが有効化されました。",emailOtpDisabled:"メールOTPが無効化されました。",smtpRequired:"先にSMTP設定を構成してテストしてください。",invalidCode:"無効なコードです。もう一度お試しください。",enableEmailOtp:"メールOTPを有効化",disableEmailOtp:"メールOTPを無効化",emailSetupEnterCode:"確認コードがメールアドレスに送信されました。このメールボックスを所有していることを確認するために、以下に入力してください。",verifyAndEnable:"確認して有効化",emailDisablePasswordHint:"メールOTPの無効化を確認するには、アカウントのパスワードを入力してください。",passwordPlaceholder:"パスワードを入力してください",backupCodesTitle:"バックアップコードを保存",backupCodesWarning:"これらのコードを安全な場所に保存してください。各コードは一度しか使用できません。",backupCodesRemaining:"バックアップコード残り{{count}}個",savedCodes:"コードを保存しました",regenBackup:"バックアップコードを再生成",regenBackupHint:"現在のTOTPコードを入力して10個の新しいバックアップコードを生成します。",newBackupCodes:"新しいバックアップコード",linkedAccounts:"リンクされたSSOアカウント",linkedAccountsDesc:"これらの外部IDプロバイダーがあなたのアカウントにリンクされています。",oidcUnlinked:"アカウントのリンクを解除しました。"},oidc:{title:"SSO / OIDCプロバイダー",desc:"シングルサインオン用のOpenID Connectプロバイダーを設定します。",addProvider:"プロバイダーを追加",newProvider:"新しいプロバイダー",empty:"OIDCプロバイダーがまだ設定されていません。",created:"プロバイダーが作成されました。",updated:"プロバイダーが更新されました。",deleted:"プロバイダーが削除されました。",refreshIcon:"アイコンを再取得",removeIcon:"アイコンを削除",iconRefreshed:"アイコンを更新しました。",iconRemoved:"アイコンを削除しました。",iconFetchFailed:"プロバイダーURLからアイコンを取得できませんでした。",deleteTitle:"プロバイダーを削除",deleteMessage:'"{{name}}"を削除しますか？リンクされたすべてのユーザーアカウントが切断されます。',form:{name:"表示名",issuerUrl:"発行者URL",clientId:"クライアントID",clientSecret:"クライアントシークレット",scopes:"スコープ",iconUrl:"アイコンURL (任意)",enabled:"有効",autoCreate:"ユーザーを自動作成",autoCreateDesc:"初回ログイン時にローカルアカウントを自動的に作成します。",autoLink:"既存アカウントを自動リンク",autoLinkDesc:"初回ログイン時にメールアドレスで既存のローカルアカウントにリンクします。",secretHint:"空白のままで現在のものを維持",secretPlaceholder:"新しいシークレット",emailClaim:"メールクレーム",emailClaimDesc:"メールIDとして使用するJWTクレーム。Azure Entra IDには'preferred_username'または'upn'を使用（email_verifiedを送信しない）。信頼できるクレーム名のみ使用してください。",emailClaimPlaceholder:"メール",emailClaimCustomClaimAutoLinkWarning:"カスタムクレームは、値がテナント管理されている場合（Azure Entra IDのupn / preferred_usernameなど）にのみ自動リンクに安全です。IdPがユーザーにこのクレームの自己宣言を許可している場合は、自動リンクを有効にしないでください。",requireEmailVerified:"メール確認を要求",requireEmailVerifiedDesc:"プロバイダーが確認済みとしてマークした場合にのみメールクレームを受け入れます。",requireEmailVerifiedWarning:"警告：確認なしでメールが受け入れられます。信頼できるプロバイダーのみで使用してください。",requireEmailVerifiedAutoLink:"この設定を変更するには、まず自動リンクを無効にしてください。",defaultGroup:"デフォルトグループ",defaultGroupDesc:"自動作成ユーザーに割り当てられるグループ。未設定の場合はViewersにフォールバックします。",defaultGroupViewersFallback:"Viewers（デフォルト）"}},encryption:{title:"MFA暗号化ステータス",enabledFromEnv:"保存時の暗号化が有効（MFA_ENCRYPTION_KEY環境変数のキー）",enabledFromFile:"保存時の暗号化が有効（データディレクトリから読み込んだキー）",enabledGenerated:"保存時の暗号化が自動生成キーで有効",notConfigured:"保存時の暗号化が設定されていません",notConfiguredDesc:"TOTPシークレットとOIDCのclient_secretsは平文で保存されています。MFA_ENCRYPTION_KEYを設定するか、書き込み可能なデータディレクトリでBambuddyを再起動して自動生成してください。",allEncrypted:"すべてのMFAシークレットは保存時に暗号化されています。",legacyRowsLabel:"レガシー平文行",encryptedRowsLabel:"暗号化された行",legacyRowsWarning:"{{count}}件のレガシー平文行を検出。OIDCプロバイダーを再保存するか、ユーザーの認証アプリを再登録して暗号化ストレージへ移行してください。",backupHint:"自動生成キーは DATA_DIR/.mfa_encryption_key に保存され、ローカルバックアップZIPに含まれます。バックアップを安全に保管するか、MFA_ENCRYPTION_KEYを明示的に設定してください。",decryptionBrokenTitle:"暗号化キーが見つかりません",decryptionBrokenError:"{{count}}件の暗号化レコードを復号できません。暗号化キーが見つかりません。以前のMFA_ENCRYPTION_KEYまたはDATA_DIR/.mfa_encryption_keyを復元してください。",migrationErrorWarning:"{{count}} 件のレガシー行を起動時に再暗号化できませんでした。サーバーログを確認し、Bambuddy を再起動して再試行してください。"}},notification:{printStarted:{title:"印刷開始",body:"{{printer}}: {{filename}} の印刷を開始しました"},printCompleted:{title:"印刷完了",body:"{{printer}}: {{filename}} が正常に完了しました"},printFailed:{title:"印刷失敗",body:"{{printer}}: {{filename}} が失敗しました"},printStopped:{title:"印刷中止",body:"{{printer}}: {{filename}} が中止されました"},printProgress:{title:"印刷進捗",body:"{{printer}}: {{filename}} は {{percent}}% 完了"},printerOffline:{title:"プリンターオフライン",body:"{{printer}} がオフラインです"},printerError:{title:"プリンターエラー",body:"{{printer}} – {{error}}"},filamentLow:{title:"フィラメント残量低下",body:"{{printer}}: フィラメントが残りわずかです"},maintenanceDue:{title:"メンテナンス期限",body:"{{printer}}: {{items}} の対応が必要です"}},errors:{generic:"問題が発生しました",networkError:"ネットワークエラーです。接続を確認してください。",notFound:"見つかりません",unauthorized:"認証エラー",serverError:"サーバーエラー",validationError:"入力内容を確認してください",printerConnectionFailed:"プリンターへの接続に失敗しました",saveFailed:"保存に失敗しました",deleteFailed:"削除に失敗しました",loadFailed:"データの読み込みに失敗しました"},hmsErrors:{title:"エラー - {{name}}",noErrors:"エラーなし",viewOnWiki:"Bambu Lab Wikiで表示",clearInstructions:"プリンターでエラーをクリアするとここからも消えます。",clearErrors:"エラーをクリア",clearSuccess:"HMSエラーをクリアしました",clearFailed:"HMSエラーのクリアに失敗しました"},mqttDebug:{title:"MQTTデバッグログ",searchPlaceholder:"トピックまたはペイロードで検索...",noMessages:"まだメッセージが記録されていません",startLoggingHint:"「ログ開始」をクリックしてMQTTメッセージのキャプチャを開始",noMessagesMatch:"フィルターに一致するメッセージがありません",adjustFilterHint:"検索条件やフィルター条件を調整してみてください",incoming:"受信",outgoing:"送信",loggingStopped:"ログ記録停止",loggingActive:"ログ記録中 - メッセージは自動更新されます",startLogging:"ログ記録を開始",stopLogging:"ログ停止",clearLog:"ログをクリア",topic:"トピック",timestamp:"タイムスタンプ",direction:"方向",all:"すべて"},printerFiles:{title:"ファイル管理",storageUsed:"使用中:",storageFree:"空き:",filterPlaceholder:"ファイルを検索...",deleteButton:"削除",deleteFiles:"{{count}}件のファイルを削除",deleteFileConfirm:'"{{name}}" を削除しますか？この操作は取り消せません。',deleteFilesConfirm:"選択した{{count}}件のファイルを削除しますか？元に戻せません。",noFiles:"このディレクトリにファイルがありません",loadingFiles:"ファイルを読み込み中...",failedToLoad:"ファイルの読み込みに失敗しました",toast:{filesDeleted:"{{count}}件のファイルを削除しました",deleteFailed:"削除に失敗: {{error}}"}},confirm:{delete:"削除しますか？",unsavedChanges:"保存されていない変更があります。このページを離れますか？",clearQueue:"キューをクリアしますか？"},login:{title:"Bambuddy ログイン",subtitle:"アカウントにサインイン",username:"ユーザー名",usernamePlaceholder:"ユーザー名を入力",usernameOrEmail:"ユーザー名またはメール",usernameOrEmailPlaceholder:"ユーザー名または @ メール",password:"パスワード",passwordPlaceholder:"パスワードを入力",signIn:"サインイン",signingIn:"ログイン中...",rememberMe:"ログイン状態を保持する",forgotPassword:"パスワードをお忘れですか？",loginSuccess:"ログインしました",loginFailed:"ログインに失敗しました",enterCredentials:"ユーザー名とパスワードを入力してください",enterEmail:"メールアドレスを入力してください",oidcLoginFailed:"OIDCログインに失敗しました",oidcErrors:{providerError:"IDプロバイダーがエラーを返しました",missingParameters:"OIDCコールバックに必須パラメーターがありません",invalidState:"OIDCの状態が無効か、すでに使用されています",stateExpired:"OIDCログインセッションが期限切れです。もう一度お試しください",providerNotFound:"OIDCプロバイダーが見つかりません",discoveryFailed:"OIDCディスカバリードキュメントの取得に失敗しました",invalidDiscovery:"OIDCディスカバリードキュメントが無効です",networkError:"OIDCトークン交換中にネットワークエラーが発生しました",badResponse:"OIDCトークン交換中に予期しない応答を受信しました",noIdToken:"OIDCプロバイダーがIDトークンを返しませんでした",validationFailed:"OIDCトークンの検証に失敗しました",nonceMismatch:"OIDCノンスが一致しません。リプレイ攻撃の可能性があります",missingSubClaim:"OIDCトークンにsubクレームがありません",noLinkedAccount:"このOIDCアイデンティティに関連付けられたローカルアカウントがありません",accountInactive:"あなたのアカウントは無効です",userResolutionFailed:"アカウントを解決できませんでした",internalError:"OIDCログイン中に内部エラーが発生しました",tokenExchangeFailed:"OIDCトークン交換に失敗しました"},forgotPasswordTitle:"パスワードを忘れた場合",forgotPasswordMessage:"パスワードを忘れた場合は、システム管理者に連絡してリセットしてもらってください。",forgotPasswordEmailMessage:"メールアドレスを入力すると、新しいパスワードを送信します。",emailAddress:"メールアドレス",emailPlaceholder:"your.email@example.com",cancel:"キャンセル",sending:"送信中...",sendResetEmail:"リセットメールを送信",howToReset:"パスワードのリセット方法：",resetStep1:"Bambuddy管理者に連絡",resetStep2:"ユーザー管理でパスワードリセットを依頼",resetStep3:"管理者が新しい仮パスワードを設定",resetStep4:"新しいパスワードでログインし、設定で変更",gotIt:"了解",twoFA:{title:"二段階認証",subtitle:"アカウントは二段階認証で保護されています。確認コードを入力してください。",methodAuthenticator:"認証アプリ",methodEmail:"メール認証",methodBackup:"バックアップコード",instructionsTotp:"認証アプリを開いて、Bambuddy用の6桁のコードを入力してください。",instructionsEmail:"6桁の確認コードをメールアドレスに送信しました。有効期限は10分です。",instructionsEmailNotSent:"下のボタンをクリックして、メールで確認コードを受け取ってください。",instructionsBackup:"8文字のバックアップコードをいずれか1つ入力してください。各コードは1回のみ使用可能です。",sendCodeButton:"メールでコードを送信する",sendingCode:"送信中...",resendCode:"コードを再送する",codeLabel:"確認コード",backupCodeLabel:"バックアップコード",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"確認する",verifyingButton:"確認中...",backToLogin:"← ログイン画面に戻る",orContinueWith:"または以下でログイン",signInWith:"{{provider}}でログイン",enterCode:"確認コードを入力してください",sendCodeFailed:"確認コードの送信に失敗しました",invalidCode:"無効なコードです。もう一度お試しください。"},resetPassword:{title:"新しいパスワードを設定",subtitle:"下のフィールドに新しいパスワードを入力して確認してください。",newPassword:"新しいパスワード",newPasswordPlaceholder:"8文字以上",confirmPassword:"パスワードの確認",confirmPasswordPlaceholder:"新しいパスワードを再入力",saving:"保存中…",submit:"新しいパスワードを設定",backToLogin:"ログインに戻る",passwordsDoNotMatch:"パスワードが一致しません",passwordTooShort:"パスワードは8文字以上で入力してください",resetFailed:"パスワードのリセットに失敗しました。リンクが期限切れの可能性があります。"}},setup:{title:"Bambuddy セットアップ",subtitle:"Bambuddyインスタンスの認証を設定",enableAuth:"認証を有効化",adminAccount:"管理者アカウント",adminAccountDesc:"既に管理者ユーザーが存在する場合、既存の管理者アカウントを使用して認証が有効化されます。既存の管理者を使用する場合は下のフィールドを空のままにするか、新しい認証情報を入力して新しい管理者ユーザーを作成してください。",adminUsername:"管理者ユーザー名",adminPassword:"管理者パスワード",optionalIfAdminExists:"（管理者ユーザーが存在する場合は任意）",adminUsernamePlaceholder:"管理者ユーザー名を入力（任意）",adminPasswordPlaceholder:"管理者パスワードを入力（任意）",confirmPassword:"パスワードの確認",confirmPasswordPlaceholder:"パスワードを確認",settingUp:"セットアップ中...",completeSetup:"セットアップを完了",toast:{authEnabledAdminCreated:"認証が有効になり、管理者ユーザーが作成されました",authEnabledExistingAdmins:"既存の管理者ユーザーを使用して認証が有効になりました",setupCompleted:"セットアップが完了しました",enterBothCredentials:"管理者のユーザー名とパスワードの両方を入力するか、既存の管理者を使用する場合は両方を空にしてください",passwordsDoNotMatch:"パスワードが一致しません",passwordTooShort:"パスワードは6文字以上必要です"}},changePassword:{title:"パスワードを変更",currentPassword:"現在のパスワード",currentPasswordPlaceholder:"現在のパスワードを入力",newPassword:"新しいパスワード",newPasswordPlaceholder:"新しいパスワードを入力（6文字以上）",confirmPassword:"新しいパスワード確認",confirmPasswordPlaceholder:"パスワードを確認",passwordsDoNotMatch:"パスワードが一致しません",passwordTooShort:"パスワードは6文字以上必要です",changing:"変更中...",success:"パスワードを変更しました",failed:"パスワードの変更に失敗しました"},plateAlert:{title:"印刷が一時停止されました！",message:"ビルドプレート上にオブジェクトが検出されました。印刷が自動的に一時停止されました。プレートをクリアして印刷を再開してください。",understand:"了解"},camera:{title:"カメラビュー",invalidPrinterId:"無効なプリンターID",live:"ライブ",snapshot:"スナップショット",restartStream:"ストリームを再開",refreshSnapshot:"スナップショットを更新",fullscreen:"フルスクリーン",exitFullscreen:"フルスクリーンを終了",connectingToCamera:"カメラに接続中...",capturingSnapshot:"スナップショットを撮影中...",connectionLost:"接続が切断されました",connectionFailed:"カメラ接続に失敗しました",reconnecting:"{{countdown}}秒後に再接続... (試行 {{attempt}}/{{max}})",reconnectNow:"今すぐ再接続",cameraUnavailable:"カメラが利用できません",cameraUnavailableDesc:"プリンターの電源がオンで接続されていることを確認してください。",noCamera:"カメラがありません",retry:"再試行",cameraStream:"カメラストリーム",zoomOut:"ズームアウト",zoomIn:"ズームイン",resetZoom:"ズームをリセット",recording:"録画中",startRecording:"録画開始",stopRecording:"録画停止",chamberLight:"チャンバーライト切替",unavailable:"カメラは利用できません",diagnose:{button:"診断",modalTitle:"カメラ診断",running:"診断を実行中...",runFailed:"診断を実行できませんでした: {{error}}",retry:"再実行",stage:{tcp_reachable:"ネットワーク到達性",first_frame:"フレーム取得",live_stream_active:"ライブストリーム動作中"},summary:{all_ok:"カメラは正常に動作しています。診断のすべての段階が成功しました。",live_stream_active_healthy:"カメラは現在新しいフレームを配信しています — テストは不要です。",printer_unreachable:"プリンターに到達できません。IPアドレス、ネットワーク接続、プリンターの電源が入っていることを確認してください。",camera_port_closed:"プリンターには到達できますが、カメラポートが閉じています。プリンター設定でLANのみモードと開発者モードが有効になっていることを確認してください。",no_frame:"カメラに接続できましたがフレームを受信できませんでした。再試行するか、プリンター設定でカメラが有効になっていることを確認してください。",unknown_failure:"カメラ診断が不明な理由で失敗しました。詳細はサポートログを確認してください。"},meta:{protocol:"プロトコル",port:"ポート",profile:"プロファイル"}}},groups:{title:"グループ管理",subtitle:"アクセス制御の権限グループを管理",backToSettings:"設定に戻る",createGroup:"グループを作成",noPermission:"このページにアクセスする権限がありません。",system:"システム",noDescription:"説明なし",usersCount:"{{count}}人のユーザー",permissionsCount:"{{count}}個の権限",edit:"編集",delete:"削除",toast:{created:"グループを作成しました",updated:"グループを更新しました",deleted:"アーカイブを削除しました",enterGroupName:"グループ名を入力"},modal:{editGroup:"グループを編集",createGroup:"グループを作成",cancel:"キャンセル",saving:"保存中...",creating:"作成中...",saveChanges:"変更を保存"},form:{groupName:"グループ名",groupNamePlaceholder:"グループ名を入力",systemGroupWarning:"システムグループ名は変更できません",description:"説明",descriptionPlaceholder:"説明を入力（任意）",permissions:"権限 ({{count}} 選択中)"},deleteModal:{title:"グループを削除",message:"このグループを削除しますか？このグループのユーザーはこれらの権限を失います。",confirm:"確認"},editor:{title:"グループを編集",createTitle:"グループを作成",search:"権限を検索...",selectAll:"すべて選択",clearAll:"すべて解除",permissionsSelected:"{{count}}件選択",noResults:"検索に一致する権限がありません"}},users:{title:"ユーザー管理",subtitle:"ユーザーとBambuddyインスタンスへのアクセスを管理",backToSettings:"設定に戻る",createUser:"ユーザーを作成",noPermission:"このページにアクセスする権限がありません。",admin:"管理者",noGroups:"グループなし",active:"アクティブ",inactive:"非アクティブ",edit:"編集",delete:"削除",system:"システム",noGroupsAvailable:"利用可能なグループがありません",table:{username:"ユーザー名",groups:"グループ",status:"ステータス",actions:"アクション"},toast:{created:"ユーザーを作成しました",updated:"ユーザーを更新しました",deleted:"アーカイブを削除しました",fillRequired:"必須項目をすべて入力してください",passwordsDoNotMatch:"パスワードが一致しません",passwordTooShort:"パスワードは6文字以上必要です",ldapProvisioned:"LDAPユーザー「{{username}}」をプロビジョニング"},modal:{createUser:"ユーザーを作成",editUser:"ユーザーを編集",cancel:"キャンセル",creating:"作成中...",saving:"保存中...",saveChanges:"変更を保存",advancedAuthSubtitle:"高度な認証を使用",tabsAriaLabel:"ユーザーソース",localTab:"ローカル",ldapTab:"LDAP",ldapSearchLabel:"ディレクトリを検索",ldapSearchPlaceholder:"ユーザー名、名前、またはメールアドレスを入力...",ldapMinChars:"検索するには2文字以上入力してください",ldapTypeToSearch:"LDAPディレクトリを検索するには入力を開始",ldapSearching:"ディレクトリを検索中...",ldapNoResults:"ディレクトリに一致するユーザーがいません",ldapSearchError:"ディレクトリ検索に失敗。LDAPサーバーの状態を確認してください。",ldapAlreadyProvisioned:"プロビジョニング済み",ldapSelectedLabel:"選択中",ldapProvision:"ユーザーをプロビジョニング",ldapProvisioning:"プロビジョニング中...",ldapErrorProvision:"プロビジョニングに失敗。LDAPサーバーの状態を確認して再試行してください。"},form:{username:"ユーザー名",usernamePlaceholder:"ユーザー名を入力",email:"メール",emailPlaceholder:"user@example.com",password:"パスワード",passwordPlaceholder:"パスワードを入力",confirmPassword:"パスワードの確認",confirmPasswordPlaceholder:"パスワードを確認",newPasswordPlaceholder:"新しいパスワードを入力",confirmNewPasswordPlaceholder:"新しいパスワードを確認",leaveBlankToKeep:"（現在のパスワードを維持する場合は空白）",groups:"グループ",optional:"オプション",autoGeneratedPassword:"安全なパスワードが自動的に生成され、ユーザーにメールで送信されます。",passwordManagedByAdvancedAuth:"パスワードは高度な認証によって管理されています。「パスワードのリセット」を使用して、メールで新しいパスワードをユーザーに送信してください。",resetPassword:"パスワードのリセット",resettingPassword:"パスワードをリセット中..."},deleteModal:{title:"ユーザーを削除",message:"このユーザーを削除してもよろしいですか？この操作は元に戻せません。",confirm:"ユーザーを削除"}},streamOverlay:{title:"ストリームオーバーレイ",invalidPrinterId:"無効なプリンターID",cameraStream:"カメラストリーム",progress:"進捗",eta:"残り時間",printerIdle:"プリンター待機中",printerOffline:"プリンターオフライン",status:{printing:"印刷中",paused:"一時停止",finished:"完了",failed:"失敗",idle:"待機中",unknown:"不明"}},profiles:{title:"フィラメントプロファイル",subtitle:"スライサープリセットと圧力キャリブレーションの管理",tabs:{bambuCloud:"Bambu Cloud",orcaCloud:"Orca Cloud",local:"ローカルプロファイル",kprofiles:"Kプロファイル"},orcaCloud:{connectedAs:"接続中",logout:"切断",noLogoutPermission:"切断する権限がありません",noConnectPermission:"Orca Cloudに接続する権限がありません",retry:"再試行",back:"別のサインイン方法を使用",connect:{title:"Orca Cloudに接続",description:"Orca Cloudアカウントにサインインして、スライサープロファイルをBambuddyに同期します。"},providers:{google:"Googleでサインイン",apple:"Appleでサインイン",github:"GitHubでサインイン",email:"メールとパスワードでサインイン"},password:{title:"メールとパスワードでサインイン",email:"メールアドレス",emailPlaceholder:"you@example.com",password:"パスワード",submit:"サインイン"},paste:{title:"サインインを完了",step1:"Orca Cloudのサインインページが新しいタブで開きました。Orcaアカウントでサインインしてください。",step2:"ブラウザは「localhost」のURLにリダイレクトされ、読み込みに失敗します。それは想定通りです — そのURLが必要です。",step3:"ブラウザのアドレスバーからURL全体をコピーして、下に貼り付けてください。",signInUrl:"サインインタブが開かなかった場合は、このURLをクリックしてください:",label:"コールバックURLをここに貼り付け",placeholder:"http://localhost:41172/callback?code=...&state=...",submit:"接続を完了"},profiles:{title:"Orca Cloudプロファイル ({{count}})",refresh:"更新",empty:"Orca Cloudアカウントにまだプロファイルがありません。"},toast:{connected:"{{email}}としてOrca Cloudに接続しました",disconnected:"Orca Cloudから切断しました"},errors:{startFailed:"Orca Cloudのサインインを開始できませんでした。",finishFailed:"Orca Cloudのサインインを完了できませんでした。",passwordFailed:"そのメールとパスワードでサインインできませんでした。",passwordEmpty:"メールアドレスとパスワードの両方を入力してください。",emptyPaste:"ブラウザからコールバックURLを貼り付けてください。",noCode:"このURLはOrca Cloudのコールバックではないようです (codeパラメータがありません)。アドレスバーから完全なURLをコピーしてください。"}},localProfiles:{title:"ローカルプロファイル",subtitle:"OrcaSlicerからスライサープリセットをインポート・管理",import:"プロファイルをインポート",importDesc:".bbscfg、.bbsflmt、.orca_filament、.zip、.jsonファイルをここにドロップ",importing:"インポート中...",search:"ローカルプリセットを検索...",noPresets:"ローカルプリセットがまだありません",noSearchResults:"検索に一致するプリセットがありません",badge:"ローカル",edit:"編集",delete:"削除",cancel:"キャンセル",deleteConfirmTitle:"プリセットを削除",deleteConfirm:"このプリセットを削除してもよろしいですか？元に戻せません。",source:"ソース",inheritsFrom:"継承元",filamentType:"タイプ",vendor:"メーカー",compatiblePrinters:"プリンター",nozzleTemp:"ノズル温度",cost:"コスト",density:"密度",pressureAdvance:"プレッシャーアドバンス",filament:"フィラメント",process:"プロセス",printer:"プリンター",toast:{importSuccess:"{{count}}件のプリセットをインポートしました",importSkipped:"{{count}}件のプリセットをスキップしました（重複）",importError:"インポート中に{{count}}件のエラーが発生しました",deleted:"プリセットを削除しました",updated:"プリセットを更新しました"}},connectedAs:"接続中:",logout:"ログアウト",noLogoutPermission:"ログアウトする権限がありません",failedToLoad:"ファイルの読み込みに失敗しました",retry:"リトライ",time:{justNow:"たった今",minsAgo:"{{count}}分前",hoursAgo:"{{count}}時間前",daysAgo:"{{count}}日前"},toast:{loggedOut:"ログアウトしました"},login:{title:"Bambuddy ログイン",subtitle:"アカウントにサインイン",email:"メールアドレス",password:"パスワード",region:"リージョン",regionGlobal:"グローバル",regionChina:"中国",verificationCode:"認証コード",totpCode:"認証アプリコード",checkEmail:"メール ({{email}}) に届いた6桁のコードを入力してください",enterTotpHint:"認証アプリの6桁のコードを入力してください",accessToken:"アクセストークン",accessTokenHint:"Bambu Cloud のアクセストークンを貼り付けてください。中国リージョンのアカウントはこの方法のみ利用可能です（電話番号認証のためメールログイン不可）。トークンの取得方法は MakerWorld の Cookie から（Wiki を参照）。",back:"戻る",loginButton:"ログイン",verifyButton:"認証",setTokenButton:"トークンを設定",useToken:"アクセストークンを使用",useEmail:"メールでログイン",toast:{loggedIn:"ログインしました",codeSent:"メールに認証コードを送信しました",enterTotp:"認証アプリのコードを入力してください",tokenSet:"トークンを設定しました"}},presets:{myPreset:"マイプリセット（編集可能）",duplicate:"複製",editable:"編集可能",failedToLoadDetails:"プリセットの詳細を読み込めませんでした",deleteConfirm:"このプロファイルを削除しますか？",deleteWarning:"「{{name}}」をBambu Cloudから完全に削除します。元に戻せません。",noDuplicatePermission:"プリセットを複製する権限がありません",noEditPermission:"プリセットを編集する権限がありません",noDeletePermission:"プロジェクトを削除する権限がありません",types:{filament:"フィラメント",printer:"プリンター",process:"プロセス"},toast:{deleted:"アーカイブを削除しました",created:"プリセットを作成しました",updated:"プリセットを更新しました",duplicated:"プリセットを複製しました",fieldAdded:'フィールド "{{key}}" を追加しました',exported:"プリセットをエクスポートしました"},baseLabel:"ベース: {{name}}",currentLabel:"現在: {{name}}",newPreset:"新規プリセット",editPreset:"プリセットを編集",duplicatePreset:"プリセットを複製",createNewPreset:"新しいプリセットを作成",customizeSettings:"新しいプリセットの設定をカスタマイズ",compareWithBase:"ベースプリセットと比較",compare:"比較",basePreset:"ベースプリセット",selectBasePreset:"ベースプリセットを選択...",presetName:"プリセット名",myCustomPreset:"カスタムプリセット",inheritsFrom:"継承元:",dropJsonToImport:"JSONファイルをドロップしてインポート",tabs:{common:"一般",allFields:"すべてのフィールド"},availableFields:"利用可能なフィールド",searchFieldsPlaceholder:"フィールドを検索...",noMatchingFields:"一致するフィールドがありません",allFieldsAdded:"すべてのフィールドが追加済みです",addCustomField:"カスタムフィールドを追加",yourOverrides:"オーバーライド一覧",noOverridesYet:"オーバーライドはまだありません",clickFieldsToAdd:"左のフィールドをクリックして追加",saveAsTemplate:"テンプレートとして保存",jsonTip:"ヒント: .jsonファイルをこのモーダルにドラッグ＆ドロップして設定をインポート"},cloudView:{searchPlaceholder:"プリセットを検索...",templates:"テンプレート",refresh:"更新",newPreset:"新規プリセット",clearFilters:"フィルターをクリア",compareMode:"比較モード",selectAnotherPreset:"同じタイプ（{{type}}）の別のプリセットを選択",clickTwoPresets:"同じタイプのプリセットを2つクリックして比較",selectFirst:"1. 最初を選択",selectSecond:"2. 2番目を選択",compareNow:"比較を実行",lastSynced:"最終同期:",showingCount:"{{total}} 件中 {{showing}} 件のプリセットを表示",noPresetsFound:"プリセットが見つかりません",columns:{filament:"フィラメント",process:"プロセス",printer:"プリンター"},noFilamentPresets:"フィラメントプリセットなし",noProcessPresets:"プロセスプリセットなし",noPrinterPresets:"プリンタープリセットなし",filters:{type:"種類",owner:"所有者",printer:"プリンター",nozzle:"ノズル",filament:"フィラメント",layer:"レイヤー",all:"すべて",myPresets:"マイプリセット",builtIn:"ビルトイン",process:"プロセス"},noTemplatesPermission:"テンプレートを管理する権限がありません",noRefreshPermission:"プロファイルを更新する権限がありません",noCreatePermission:"プロジェクトを作成する権限がありません"},templates:{title:"フィラメントプロファイル",noTemplates:"テンプレートがありません。バックエンドを再起動してデフォルトテンプレートを作成してください。",createFirst:"プリセットエディタからテンプレートを作成",typeFilter:"タイプ:",deleteTitle:"テンプレートを削除",deleteWarning:"この操作は元に戻せません",deleteConfirm:'"{{name}}" を削除しますか？',namePlaceholder:"テンプレート名",descriptionPlaceholder:"説明",settingsJson:"設定 (JSON)",fieldsCount:"{{count}}フィールド",shownInModals:"モーダルに表示",hiddenInModals:"モーダルで非表示",apply:"適用",toast:{deleted:"アーカイブを削除しました",updated:"テンプレートを更新しました",created:"テンプレートを作成しました",applied:"テンプレートを適用しました"}}},support:{debugLoggingActive:"デバッグログが有効です",manageLogs:"管理",collectItem7:"プリンター接続状態とファームウェアバージョン",collectItem8:"連携状態（Spoolman、MQTT、HA）",collectItem9:"ネットワークインターフェース（サブネットのみ）",collectItem10:"Pythonパッケージバージョン",collectItem11:"データベース健全性チェック",collectItem12:"Docker環境の詳細",bundleGenerating:"バンドルを生成中...",bundleStepConnection:"プリンターの接続確認を実行中",bundleStepVirtualPrinters:"仮想プリンターのセットアップ確認を実行中",bundleStepLogScan:"最近のログから既知の問題をスキャン中",bundleStepBuild:"サポートバンドル ZIP を作成中"},fileManager:{title:"ファイル管理",subtitle:"印刷ファイルの整理と管理",uploadFiles:"ファイルをアップロード",newFolder:"新しいフォルダ",folderName:"フォルダ名",folderNamePlaceholder:"例: 機能パーツ",renameFile:"ファイル名を変更",renameFolder:"フォルダ名を変更",invalidFilenameChar:'印刷ファイル名に "{{char}}" は使用できません。プリンターのSDカードは次の文字を拒否します: < > : " / \\ | ? *',moveFiles:"{{count}}件のファイルを移動",rootNoFolder:"ルート（フォルダなし）",current:"（現在）",linkFolder:"フォルダをリンク",linkFolderDescription:"「{{name}}」をプロジェクトまたはアーカイブにリンクしてすばやくアクセス。",project:"プロジェクト",archive:"アーカイブ",noProjectsFound:"プロジェクトが見つかりません",noArchivesFound:"アーカイブが見つかりません",unlink:"リンク解除",link:"リンク",dragDropFiles:"ファイルをここにドラッグ＆ドロップ",dropFilesHere:"ここにファイルをドロップ",orClickToBrowse:"またはクリックして選択",allFileTypesSupported:"すべてのファイルタイプに対応。ZIPファイルは展開されます。",zipFilesDetected:"ZIPファイルを検出",zipExtractOptions:"ZIPファイルは展開されます。フォルダー構造の処理方法を選択：",preserveZipStructure:"ZIPのフォルダ構造を保持",createFolderFromZip:"ZIPファイル名からフォルダーを作成",stlThumbnailGeneration:"STLサムネイル生成",zipMayContainStl:"ZIPファイルにSTLファイルが含まれている場合があります。展開時にサムネイルを生成できます。",thumbnailsCanBeGenerated:"STLファイルのサムネイルを生成できます。大きなモデルは処理に時間がかかる場合があります。",generateThumbnailsForStl:"STLファイルのサムネイルを生成",threemfDetected:"3MFファイルを検出",threemfExtractionInfo:"プリンターモデル、素材、色、印刷設定は3MFファイルから自動的に抽出されます。",willBeExtracted:"• 展開予定",filesExtracted:"• {{count}}個のファイルを展開済み",uploadComplete:"アップロード完了: {{succeeded}} 件成功",uploadFailed:"アップロード失敗",zipFilesFailed:"{{count}}個のファイルが失敗",uploading:"アップロード中...",changeLink:"リンクを変更...",linkTo:"リンク先...",linkToProjectOrArchive:"プロジェクトまたはアーカイブにリンク",addToQueue:"キューに追加",schedulePrint:"印刷をスケジュール",generateThumbnail:"サムネイルを生成",generateThumbnails:"サムネイルを生成",generateThumbnailsForMissing:"サムネイルのないSTLファイルのサムネイルを生成",gridView:"グリッド表示",listView:"リスト表示",lowDiskSpaceWarning:"ディスク容量不足の警告",lowDiskSpaceDetails:"{{total}}中{{free}}の空き容量のみ。しきい値は設定で{{threshold}}GBに設定されています。",files:"ファイル",folders:"フォルダ",size:"サイズ",free:"空き:",allFiles:"すべてのファイル",allExternal:"外部",externalIsEmpty:"外部ファイルはありません",externalEmptyDescription:"リンクされた外部フォルダ内のファイルがここに表示されます。",wrap:"折り返し",enableTextWrapping:"テキスト折り返しを有効化",disableTextWrapping:"テキスト折り返しを無効化",collapse:"折りたたむ",collapseFoldersByDefault:"フォルダをデフォルトで折りたたむ",expandFoldersByDefault:"フォルダをデフォルトで展開する",dragToResizeTooltip:"ドラッグしてリサイズ、ダブルクリックでリセット",searchFiles:"ファイルを検索...",allTypes:"すべての種類",prints:"印刷回数",ascending:"昇順",descending:"降順",resultsCount:"{{total}}件中{{showing}}件",selectAll:"すべて選択",deselectAll:"すべて選択解除",selected:"{{count}}件選択中",adding:"追加中...",loadingFiles:"ファイルを読み込み中...",folderIsEmpty:"フォルダーは空です",noFilesYet:"ファイルはまだありません",folderEmptyDescription:"ファイルをアップロードするか、このフォルダーにファイルを移動して開始しましょう。",noFilesDescription:"印刷関連ファイルの整理を始めるにはファイルをアップロードしてください。",noMatchingFiles:"一致するファイルがありません",noMatchingFilesDescription:"現在の検索またはフィルター条件に一致するファイルがありません。",clearFilters:"フィルターをクリア",printedCount:"{{count}}回印刷済み",uploadedBy:"アップロード者",deleteFolder:"フォルダを削除",deleteFile:"ファイルを削除",deleteFilesCount:"{{count}}件のファイルを削除",deleteFolderConfirm:"このフォルダを削除しますか？中のファイルもすべて削除されます。",deleteFileConfirm:"このファイルを削除しますか？",deleteFilesConfirm:"選択した{{count}}件のファイルを削除しますか？この操作は元に戻せません。",deleting:"削除中...",noPermissionRenameFolder:"フォルダー名を変更する権限がありません",noPermissionLinkFolder:"フォルダーをリンクする権限がありません",noPermissionDeleteFolder:"フォルダーを削除する権限がありません",noPermissionPrint:"印刷する権限がありません",noPermissionSlice:"ファイルをスライスする権限がありません",noPermissionAddToQueue:"キューに追加する権限がありません",noPermissionDownload:"ファイルをダウンロードする権限がありません",noPermissionRenameFile:"このファイル名を変更する権限がありません",noPermissionGenerateThumbnail:"サムネイルを生成する権限がありません",noPermissionDeleteFile:"このファイルを削除する権限がありません",noPermissionCreateFolder:"フォルダーを作成する権限がありません",noPermissionUpload:"ファイルをアップロードする権限がありません",noPermissionMoveFiles:"ファイルを移動する権限がありません",noPermissionDeleteFiles:"ファイルを削除する権限がありません",linkExternal:"外部リンク",linkExternalFolder:"外部フォルダをリンク",linkExternalFolderDescription:"ホストディレクトリ（NAS、USB、ネットワーク共有）をファイルマネージャにマウントします。ファイルはコピーされず、元のパスから直接アクセスされます。",externalFolderNamePlaceholder:"例：NASプリント",externalPath:"ホストパス",externalPathHelp:"Dockerホスト上のディレクトリの絶対パス。コンテナにバインドマウントされている必要があります。",readOnly:"読み取り専用",readOnlyHelp:"アップロードと削除を防止",showHiddenFiles:"隠しファイルを表示（ドットファイル）",externalFolder:"外部フォルダ",scanFolder:"スキャン",toast:{folderCreated:"フォルダを作成しました",folderDeleted:"フォルダを削除しました",fileDeleted:"ファイルを削除しました",filesDeleted:"{{count}}件のファイルを削除しました",filesMoved:"ファイルを移動しました",folderLinked:"フォルダをリンクしました",folderUnlinked:"フォルダのリンクを解除しました",externalFolderLinked:"外部フォルダがリンクされスキャンされました",folderScanned:"スキャン完了：{{added}}件追加、{{removed}}件削除",addedToQueue:"{{count}}個のファイルをキューに追加しました",addedToQueuePartial:"{{added}}件追加、{{failed}}件失敗",failedToAddToQueue:"ファイルの追加に失敗: {{error}}",fileRenamed:"ファイル名を変更しました",folderRenamed:"フォルダ名を変更しました",thumbnailsGenerated:"{{count}}件のサムネイルを生成しました",thumbnailsGeneratedPartial:"{{succeeded}}件生成、{{failed}}件失敗",noStlMissingThumbnails:"サムネイルのないSTLファイルはありません",failedToGenerateThumbnails:"サムネイルの生成に失敗: {{error}}",thumbnailGenerated:"サムネイルを生成しました",failedToGenerateThumbnail:"サムネイルの生成に失敗: {{error}}"}},projects:{title:"プロジェクト",subtitle:"印刷プロジェクトを管理",newProject:"新規プロジェクト",editProject:"プロジェクトを編集",deleteProject:"プロジェクトを削除",projectName:"プロジェクト名",description:"説明",noProjects:"プロジェクトはまだありません",noProjectsFiltered:"{{status}}のプロジェクトはありません",noProjectsFilteredHelp:"{{status}}のプロジェクトがありません。ステータスが変更されるとここに表示されます。",createFirst:"最初のプロジェクトを作成して、関連する印刷の整理、進捗管理、ビルドの管理を始めましょう。",createFirstButton:"最初のプロジェクトを作成",create:"作成",files:"ファイル",prints:"印刷",plates:"プレート",parts:"パーツ",lastModified:"最終更新日",deleteConfirm:"このプロジェクトを削除しますか？アーカイブとキューアイテムはリンク解除されますが、削除されません。",addFiles:"ファイルを追加",removeFile:"ファイルを削除",viewDetails:"詳細を表示",namePlaceholder:"プロジェクト名",descriptionPlaceholder:"プロジェクトの説明（任意）",urlLabel:"URL",urlPlaceholder:"https://makerworld.com/...",urlInvalid:"URLはhttp://またはhttps://で始まる必要があります",openExternalUrl:"プロジェクトのURLを開く",coverImageLabel:"カバー画像",coverImageAlt:"プロジェクトのカバー画像",coverImageUpload:"アップロード",coverImageReplace:"置き換える",coverImageRemove:"削除",color:"色",targetPlates:"目標プレート数",targetPlatesPlaceholder:"例: 10",targetPlatesHelp:"印刷ジョブの数",targetParts:"目標パーツ数",targetPartsPlaceholder:"例: 50",targetPartsHelp:"必要なオブジェクトの総数",tagsLabel:"タグ（カンマ区切り）",tagsPlaceholder:"カンマ区切りのタグ",dueDate:"期限",priority:"優先度",priorityLow:"低",priorityNormal:"通常",priorityHigh:"高",priorityUrgent:"緊急",statusActive:"進行中",statusCompleted:"完了",statusArchived:"アーカイブ済み",done:"完了",completed:"完了",failed:"失敗",inQueue:"キュー内",noPrintsYet:"印刷履歴なし",printJobs:"印刷ジョブ",partsPrinted:"印刷済みパーツ",failedParts:"失敗パーツ",import:"インポート",export:"エクスポート",importProject:"プロジェクトをインポート",exportAll:"すべてのプロジェクトをエクスポート",loading:"プロジェクトを読み込み中...",noEditPermission:"プロジェクトを編集する権限がありません",noDeletePermission:"プロジェクトを削除する権限がありません",noCreatePermission:"プロジェクトを作成する権限がありません",noImportPermission:"プロジェクトをインポートする権限がありません",noExportPermission:"プロジェクトをエクスポートする権限がありません",toast:{created:"プロジェクトを作成しました",updated:"プロジェクトを更新しました",deleted:"アーカイブを削除しました",imported:"プロジェクトをインポートしました",multipleImported:"{{count}}件のプロジェクトをインポートしました",importFailed:"インポートに失敗しました",exported:"プロジェクトをエクスポートしました（メタデータのみ）"}},projectDetail:{notFound:"見つかりません",backToProjects:"プロジェクト一覧に戻る",export:"エクスポート",exportProject:"プロジェクトをエクスポート",noExportPermission:"プロジェクトをエクスポートする権限がありません",noEditPermission:"このプロジェクトを編集する権限がありません",partOf:"所属先",priorityLabel:"優先度",noPrints:"このプロジェクトにはまだ印刷がありません",status:{active:"進行中",completed:"完了",archived:"アーカイブ済み"},priority:{low:"低",normal:"通常",high:"高",urgent:"緊急"},dueDate:{overdue:"期限超過",today:"今日が期限",daysLeft:"残り{{count}}日"},progress:{platesProgress:"プレート進捗",partsProgress:"パーツ進捗",printJobs:"印刷ジョブ",parts:"パーツ",percentComplete:"{{percent}}% 完了",remaining:"残り {{count}} 件"},stats:{printJobs:"印刷ジョブ",total:"合計",failed:"失敗 {{count}} 件",partsPrinted:"印刷済みパーツ {{count}} 件",printTime:"印刷時間",filamentUsed:"フィラメント使用量"},cost:{title:"コスト追跡",filamentCost:"フィラメント",energy:"エネルギー",totalCost:"合計コスト",total:"合計",includesBom:"BOM含む",budget:"予算",remaining:"残り"},subProjects:{title:"サブプロジェクト ({{count}})"},notes:{title:"メモ",noEditPermission:"このプロジェクトを編集する権限がありません",placeholder:"このプロジェクトについてメモを追加...",empty:"<空>"},files:{title:"ファイル",linkFolders:"ファイルマネージャーからフォルダーをリンク",forQuickAccess:"してクイックアクセスできるようにします。",fileCount:"{{count}}ファイル",empty:"<空>",noFiles:"このフォルダにファイルはありません。",print:"今すぐ印刷",addToQueue:"キューに追加"},bom:{title:"部品表",acquired:"{{completed}}/{{total}} 取得済み",showAll:"すべて表示",hideDone:"完了を非表示",addPart:"パーツを追加",noAddPermission:"パーツを追加する権限がありません",partNamePlaceholder:"パーツ名",partName:"パーツ名",qty:"数量",price:"価格 ({{currency}})",sourcingUrlPlaceholder:"URL（任意）",remarksPlaceholder:"備考",deletePart:"パーツを削除",deleteConfirm:"「{{name}}」を削除しますか？",noUpdatePermission:"パーツを更新する権限がありません",noEditPermission:"このプロジェクトを編集する権限がありません",noDeletePermission:"プロジェクトを削除する権限がありません",totalCost:"合計コスト",empty:"<空>"},timeline:{title:"アクティビティタイムライン",empty:"<空>"},template:{saveAsTemplate:"テンプレートとして保存",noCreatePermission:"プロジェクトを作成する権限がありません"},queue:{title:"印刷キュー",viewAll:"すべて表示",printing:"印刷中 {{count}} 件",queued:"キュー内 {{count}} 件"},prints:{title:"印刷 ({{count}})"},toast:{projectUpdated:"プロジェクトを更新しました",partAdded:"パーツを追加しました",partRemoved:"パーツを削除しました",exportFailed:"エクスポートに失敗しました",projectExported:"プロジェクトがエクスポートされました",templateCreated:"プロジェクトからテンプレートを作成しました"}},system:{title:"システム情報",version:"バージョン",uptime:"稼働時間",cpuUsage:"CPU使用率",memoryUsage:"メモリ使用量",diskUsage:"ディスク使用量",networkInfo:"ネットワーク情報",logs:"ログ",debugMode:"デバッグモード",enableDebug:"デバッグログを有効化",disableDebug:"デバッグログを無効化",downloadLogs:"ログをダウンロード",clearLogs:"通知ログを削除",dockerInfo:"Docker情報",containerName:"コンテナ名",imageName:"イメージ名",platform:"プラットフォーム",architecture:"アーキテクチャ"},library:{title:"フィラメントライブラリ",addFilament:"フィラメントを追加",editFilament:"フィラメントを編集",deleteFilament:"フィラメントを削除",vendor:"メーカー",material:"素材",color:"色",kFactor:"K値",temperature:"温度",noFilaments:"ライブラリにフィラメントがありません",deleteConfirm:"このフィラメントを削除しますか？",importFromPrinter:"プリンターからインポート",exportToFile:"ファイルにエクスポート"},slice:{title:"モデルをスライス",action:"スライス",actionAll:"{{count}} プレートすべてをスライス",actionAllTitle:"すべてのプレートを 1 つのマルチプレート出力としてスライスします（アーカイブは 1 件）。フィラメントの選択はプロジェクトで定義されたすべてのスロットを対象とします。",allPlatesToggle:"{{count}} プレートすべてをスライス",slicing:"スライス中…",printer:"プリンタープロファイル",process:"プロセスプロファイル",filament:"フィラメントプロファイル",filamentSlot:"フィラメント {{index}}（{{type}}）",selectPreset:"— プリセットを選択 —",loadingPresets:"プリセットを読み込み中…",analyzingPlateFilaments:"プレートのフィラメントを分析中…",analyzingPlateFilamentsHint:"このプレートが使用するAMSスロットを検出するためにプレビュースライスを実行中。キャッシュ後は再オープンが即座になります。",previewToast:"{{name}}を分析中 – {{elapsed}}",previewWithProgress:"{{name}}を分析中 – {{stage}} ({{percent}}%) – {{elapsed}}",notUsedByPlate:"— このプレートでは使用しない",noPresetsForSlot:"プリセットなし",otherPrinters:"他のプリンター",presetsLoadFailed:"プリセットの読み込みに失敗。先に設定 → プロファイルからインポートしてください。",refreshPresets:"再読み込み",refreshPresetsTitle:"プリセットを再取得 — クラウドとバンドルの最新リストを取得します（Bambu Studio または Bambu Handy でプリセットを削除した後にお使いください）",allPresetsRequired:"すべてのプリセットを選択する必要があります",bundle:"スライサーバンドル",bundleNone:"— なし（プリセットを個別に選択）—",bundleAllRequired:"バンドルのプロセスとすべてのフィラメントスロットを選択してください",enqueuing:"スライスジョブを送信中…",queued:"待機中…",failed:"スライスに失敗。サイドカーのログを確認してください。",startedToast:"バックグラウンドで{{name}}をスライス中…",queuedToast:"待機中: {{name}} – {{elapsed}}",runningToast:"{{name}}をスライス中 – {{elapsed}}",runningWithProgress:"{{name}} – {{stage}} ({{percent}}%) – {{elapsed}}",runningWithProgressMultiPlate:"プレート {{plateIndex}} / {{plateCount}} • {{name}} – {{stage}} ({{percent}}%) – {{elapsed}}",completedToast:"{{name}}をスライス済み",failedTitle:"スライスに失敗しました",failedToast:"{{name}}のスライスに失敗: {{detail}}",tier:{local:"インポート済み",cloud:"Bambu Cloud",orcaCloud:"Orca Cloud",standard:"標準"},cloud:{notAuthenticated:"Bambu Cloudにサインイン（設定 → プロファイル → Bambu Cloud）してクラウドプリセットを表示。",expired:"Bambu Cloudセッションの有効期限切れ – クラウドプリセットを更新するには再ログインしてください。",unreachable:"Bambu Cloudに接続できません。ローカルと標準のプリセットは引き続き使用できます。"},orcaCloud:{notAuthenticated:"Orcaプリセットを表示するには、Orca Cloudにサインインしてください（プロファイル → Orca Cloud）。",expired:"Orca Cloudセッションが期限切れです — Orcaプリセットを更新するには再度サインインしてください。",unreachable:"Orca Cloudは現在到達できません。他のプリセットは引き続き動作します。"},bedType:{label:"ビルドプレート",auto:"自動（プロセスプリセットを使用）",coolPlate:"クールプレート",coolPlateSuperTack:"Cool Plate SuperTack",engineering:"Engineering Plate",highTemp:"High Temp Plate",texturedPEI:"Textured PEI Plate",smoothPEI:"Smooth PEI Plate"}},spoolman:{title:"Spoolman連携",enabled:"Spoolman有効",url:"Spoolman URL",connected:"接続中",disconnected:"未接続",testConnection:"接続テスト",sync:"同期",syncing:"同期中...",lastSync:"最終同期",linkToSpoolman:"Spoolmanに連携",openInSpoolman:"Spoolmanで開く",unlinkSpool:"スプールのリンクを解除",unlinkConfirmTitle:"スプールの割り当てを解除しますか？",unlinkConfirmMessage:"このスロットからスプールが削除されます。スプール自体のデータは変更されません。",selectSpool:"スプールを選択",noUnlinkedSpools:"割り当てられていないスプールがありません",linkSuccess:"スプールが正常に割り当てられました",linkFailed:"スプールの割り当てに失敗しました",unlinkSuccess:"スプールの割り当てが正常に解除されました",unlinkFailed:"スプールの割り当て解除に失敗しました",linkedSpool:"割り当て済みスプール",spoolId:"スプールID",fillSourceLabel:"(Spoolman)",weight:"重量",remaining:"残り",disableWeightSync:"AMS推定重量同期を無効化",disableWeightSyncDesc:"AMS推定値から残量を更新しません。AMSの割合ベースの推定よりもSpoolmanの使用量追跡を優先する場合に使用してください。新しいスプールは引き続きAMS推定値を初期重量として使用します。",reportPartialUsage:"失敗した印刷の部分使用量を報告",reportPartialUsageDesc:"印刷が失敗またはキャンセルされた場合、レイヤー進捗に基づいてその時点までの推定フィラメント使用量を報告します。"},inventory:{title:"スプール在庫管理",subtitle:"スプールを管理",spoolmanMixedContentTitle:"Spoolman を HTTPS で読み込めません — ブラウザが混在コンテンツをブロックしています",spoolmanMixedContentBody:"Bambuddy はリバースプロキシ経由で HTTPS 配信されていますが、Spoolman の URL は HTTP のままです。ブラウザはセキュリティ上の理由で混在コンテンツをブロックするため、埋め込みの Spoolman UI を表示できません。Spoolman も HTTPS でアクセスできる必要があります。",spoolmanMixedContentFixReverseProxy:"Spoolman を Bambuddy と同じリバースプロキシ（Traefik / Nginx / Caddy）の後ろに HTTPS で配置し、設定で Spoolman URL を新しい HTTPS アドレスに更新してください。",spoolmanMixedContentFixOpenNewTab:"回避策として Spoolman を新しいタブで HTTP として開くことができます — 混在コンテンツのルールは埋め込みフレームのみに適用され、独立したタブは問題なく動作します。",spoolmanOpenInNewTab:"Spoolman を新しいタブで開く",labels:{title:"スプールラベルを印刷",selectedCount:"{{count}}件選択中",pickSpools:"ラベルを印刷するスプールを選択:",searchPlaceholder:"名前、ブランド、#IDで検索",filterByMaterial:"素材:",allMaterials:"すべて",selectVisible:"表示中をすべて選択 ({{count}})",deselectVisible:"表示中を選択解除",clearAll:"すべてクリア",noSpoolsToShow:"表示するスプールはありません。フィルターを調整して再試行してください。",noMatches:"現在の検索またはフィルターに一致するスプールはありません。",printOne:"このスプールのラベルを印刷",printLabels:"ラベルを印刷…",bulkTitle:"現在表示中の{{count}}件からラベルを印刷するスプールを選択",noSpoolsTitle:"ラベル付けするスプールなし",error:"ラベルを生成できませんでした: {{msg}}",sortBy:{label:"並べ替え:",id:"ID順",color:"色順"},templates:{amsHolderSmall:{label:"AMS ホルダー — 小 (74 × 33 mm)",hint:"1ページにつき1枚；MakerWorld モデル 752566 (AMS フィラメントラベルホルダー) の印刷可能なラベルに対応します。"},amsHolderLarge:{label:"AMS ホルダー — 大 (75 × 55 mm)",hint:"1ページにつき1枚；AMS フィラメントラベルホルダーのカード紙挿入バージョンに対応します。色見本、ブランド、素材、ID、QR コードを表示できる広さです。"},box40x30:{label:"ボックスラベル (40 × 30 mm)",hint:"1ページに1枚。DK/Brother の一般的なロールサイズで、フィラメント袋や保管箱のラベルに適しています。"},box:{label:"Box label (62 × 29 mm)",hint:"1ページに1ラベル、Brother PT/QLおよびDymoの小さなラベル用サイズ。"},averyL7160:{label:"Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)",hint:"EUシート規格、A4ページに21枚のラベル。"},avery5160:{label:"Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)",hint:"米国シート規格、Letterページに30枚のラベル。"}}},addSpool:"スプールを追加",editSpool:"スプールを編集",copySpool:"スプールをコピー",material:"素材",selectMaterial:"素材を選択...",subtype:"サブタイプ",brand:"ブランド",searchBrand:"ブランドを検索...",useCustomBrand:"「{{brand}}」を使用",useCustomMaterial:"カスタム素材を使用: {{material}}",colorName:"色名",colorNamePlaceholder:"ジェイドホワイト、ファイアレッド...",color:"色",hexColor:"HEXカラー",pickColor:"カスタムカラーを選択",labelWeight:"表示重量",coreWeight:"空スプール重量",searchSpoolWeight:"スプール重量を検索...",weightUsed:"使用量",currentWeight:"残量",measuredWeight:"計測重量",spoolName:"スプール",costPerKg:"kgあたりのコスト",storageLocation:"保管場所",storageLocationPlaceholder:"例：棚A、引き出し1",openInInventory:"インベントリで開く",measuredWeightError:"計測重量は{{min}}gから{{max}}gの間で入力してください。",slicerFilament:"スライサーフィラメント",slicerFilamentName:"スライサープリセット名",slicerPreset:"スライサープリセット",searchPresets:"フィラメントプリセットを検索...",selectedPreset:"選択済み",noPresetsFound:"プリセットが見つかりません",tempOverrides:"温度オーバーライド",note:"メモ",notePlaceholder:"このスプールに関する追加メモ...",category:"カテゴリ",categoryPlaceholder:"例：本番、試作、クライアントA",categoryNone:"カテゴリなし",storageLocationNone:"保管場所未設定",lowStockThresholdOverride:"在庫低下のしきい値（このスプール）",lowStockThresholdOverrideHelp:"空欄の場合、グローバル設定（{{global}}%）を使用します。",clearRfid:"RFIDタグをクリア",rfidCleared:"RFIDタグをクリアしました",archive:"アーカイブ",restore:"復元",noSpools:"スプールがありません。最初のスプールを追加してください。",noAvailableSpools:"利用可能なスプールがありません。インベントリにスプールを追加するか、別のスロットからスプールの割り当てを解除してください。",kProfiles:"Kプロファイル",addKProfile:"Kプロファイルを追加",assignSpool:"スプールを割り当て",unassignSpool:"割り当て解除",assignSuccess:"スプールを割り当て、AMSスロットを設定しました",assignFailed:"スプールの割り当てに失敗しました",selectSpool:"このスロットに割り当てるスプールを選択",assigned:"割り当て済み",assigning:"割り当て中...",searchSpools:"スプールを検索...",showAllSpools:"すべてのスプールを表示",spoolmanSpools:"Spoolman スプール",allMaterials:"すべての素材",filterByBrand:"ブランドで絞り込み...",showArchived:"アーカイブ済みを表示",quickAdd:"クイック追加（在庫）",quantity:"数量",stock:"在庫",configured:"設定済み",spoolsCreated:"{{count}}本のスプールを作成しました",spoolsPartiallyCreated:"{{total}}本中{{created}}本のスプールを作成しました（一部失敗）",spoolCreated:"スプールを作成しました",spoolUpdated:"スプールを更新しました",spoolDeleted:"スプールを削除しました",deepLinkSpoolNotFound:"スプールが見つかりません",deepLinkFetchFailed:"スプールを読み込めませんでした — もう一度お試しください",spoolArchived:"スプールをアーカイブしました",spoolRestored:"スプールを復元しました",kProfileSaveFailed:"Kプロファイル設定を保存できませんでした",syncWeightSpoolNotFound:"スプールが見つかりません — 削除された可能性があります",syncWeightSpoolmanUnreachable:"Spoolmanに接続できません — 後でもう一度お試しください",syncWeightFailed:"重量の同期に失敗しました",spoolmanUnreachable:"Spoolmanに接続できません — 後でもう一度お試しください",deleteSpoolNotFound:"スプールが見つかりません — すでに削除された可能性があります",deleteFailed:"スプールを削除できませんでした",archiveSpoolNotFound:"スプールが見つかりません — すでに削除された可能性があります",archiveFailed:"スプールをアーカイブできませんでした",restoreSpoolNotFound:"スプールが見つかりません — すでに削除された可能性があります",restoreFailed:"スプールを復元できませんでした",saveFailed:"変更を保存できませんでした",tagClearFailed:"タグを削除できませんでした",deleteConfirm:"このスプールを削除しますか？この操作は元に戻せません。",archiveConfirm:"このスプールをアーカイブしますか？",advancedSettings:"詳細設定",filamentInfoTab:"フィラメント情報",paProfileTab:"PAプロファイル",filamentInfo:"フィラメント",additional:"追加情報",loadingPresets:"クラウドプリセットを読み込み中...",cloudConnected:"クラウド接続済み",cloudNotConnected:"クラウド未接続（デフォルト使用）",recentColors:"最近",searchColors:"色を検索...",searchResults:"検索結果",allColors:"すべての色",commonColors:"一般的な色",showLess:"少なく表示",showAll:"すべて表示",noColorsFound:"一致する色がありません",noResults:"結果なし",extraColorsLabel:"追加の色",extraColorsPlaceholder:"EC984C,#6CD4BC,A66EB9,D87694",extraColorsHint:"2〜8個の16進数ストップをカンマで区切って貼り付けます。グラデーションとして表示されます。",extraColorsInvalid:"無効な16進数を無視: {{tokens}}",colorEffectLabel:"エフェクト",colorEffect:{none:"なし",sparkle:"スパークル",wood:"ウッド",marble:"マーブル",glow:"グロー",matte:"マット",silk:"シルク",galaxy:"ギャラクシー",rainbow:"レインボー",metal:"メタル",translucent:"半透明",gradient:"グラデーション",dualColor:"デュアルカラー",triColor:"トリカラー",multicolor:"マルチカラー"},selectMaterialFirst:"フィラメント情報タブで素材を選択してください。",noPrintersConfigured:"プリンターが設定されていません。プリンターを追加してください。",matchingFilter:"フィルター",anyBrand:"すべてのブランド",anyVariant:"すべてのバリアント",autoSelect:"自動選択",matches:"件一致",match:"件一致",noMatches:"一致なし",connected:"接続済み",offline:"オフライン",printerOffline:"プリンターがオフラインです。接続してキャリブレーションプロファイルを表示してください。",noKProfilesMatch:"選択したフィラメントに一致するKプロファイルがありません。",leftNozzle:"左ノズル",rightNozzle:"右ノズル",profilesSelected:"キャリブレーションプロファイル選択済み",totalInventory:"在庫合計",totalConsumed:"総消費量",byMaterial:"素材別",inPrinter:"プリンター内",lowStock:"残量少",sinceTracking:"追跡開始以降",resetConsumedCounter:"カウンタをリセット",resetConsumedCounterTooltip:"このスプールの消費量カウンタを0にする。残量は変更されません。",resetConsumedCounterConfirm:"このスプールの消費量カウンタを0にリセットしますか？以降の印刷は再びゼロからカウントされます。スプール自体、残量計算、設定は変更されません。",resetAllConsumedCounters:"すべてのカウンタをリセット",resetAllConsumedCountersTooltip:"すべてのスプールの消費量カウンタを0にする。残量は変更されません。",resetAllConsumedCountersConfirm:"{{count}}件すべてのスプール（アーカイブ済みを含む）の消費量カウンタを0にリセットしますか？「累計消費量」の値がクリアされ、以降の印刷はゼロからカウントされます。スプール自体と残量は変更されません。",consumedCounterReset:"カウンタをリセットしました",allConsumedCountersReset:"{{count}}件のスプールのカウンタをリセットしました",resetConsumedCounterFailed:"カウンタのリセットに失敗しました",loadedInAms:"AMS/Extに装填中",remaining:"残り",weightCheck:"重量チェック",lastWeighed:"最終計量",neverWeighed:"未計量",search:"スプールを検索...",showing:"表示",to:"〜",of:"/",show:"表示",spools:"スプール",spool:"スプール",page:"ページ",noSpoolsMatch:"結果なし",noSpoolsMatchDesc:"検索やフィルターを調整してみてください。",active:"アクティブ",archived:"アーカイブ済み",all:"すべて",used:"使用済み",new:"新規",clearFilters:"フィルターをクリア",table:"テーブル",cards:"カード",net:"正味",groupSimilar:"グループ化",groupedSpools:"{{count}}本の同一スプール",groupedRows:"行",columns:"列",configureColumns:"列の設定",configureColumnsDesc:"ドラッグして並べ替えるか、矢印を使用してください。目のアイコンで表示/非表示を切り替えます。",visible:"表示中",reset:"リセット",cancel:"キャンセル",applyChanges:"変更を適用",moveUp:"上へ移動",moveDown:"下へ移動",hideColumn:"列を非表示",showColumn:"列を表示",linkToSpool:"スプールにリンク",tagLinked:"タグがスプールにリンクされました",tagLinkFailed:"タグのリンクに失敗しました",tagAlreadyLinked:"タグは既に別のスプールにリンクされています",unknownTag:"不明なRFIDタグが検出されました",usageHistory:"使用履歴",noUsageHistory:"まだ使用記録がありません",printName:"プリント名",weightConsumed:"消費重量",clearHistory:"クリア",historyCleared:"使用履歴がクリアされました",fillSourceLabel:"(在庫)",lowStockThresholdError:"しきい値は0.1から99.9の間でなければなりません",assignMismatchTitle:"材料の不一致",assignMismatchMessage:"選択したスプールの材料「{{spoolMaterial}}」は、{{location}} のトレイ材料「{{trayMaterial}}」と一致しません。割り当てますか？",assignMismatchConfirm:"強制的に割り当て",assignPartialMismatchMessage:"スプールの材料「{{spoolMaterial}}」は「{{trayMaterial}}」に似ていますが、{{location}} と完全には一致しません。続行しますか？",assignProfileMismatchMessage:"スプールのプロファイル「{{spoolProfile}}」は {{location}} のトレイプロファイル「{{trayProfile}}」と一致しません。続行しますか？",assignReconfigureNote:"AMSスロットはスプールのプロファイルで再構成されます。",spoolmanFilamentCatalog:"Spoolmanフィラメントカタログ",pickFromSpoolmanCatalog:"Spoolmanカタログから選択…",spoolmanFilamentSelected:"Spoolmanカタログからフィラメントを選択しました",spoolmanFilamentUnlinked:"フィラメントカタログのリンクを解除しました",noSpoolmanFilaments:"Spoolmanカタログにフィラメントが見つかりません",spoolmanFilamentColorSwatch:"フィラメントの色",spoolWeightManagedBySpoolman:"空スプールの重量はSpoolmanでフィラメントタイプごとに管理されています",spoolmanCatalogLoadFailed:"Spoolmanのフィラメントカタログを読み込めませんでした"},timelapse:{title:"タイムラプス",create:"タイムラプスを作成",download:"ダウンロード",delete:"削除",preview:"プレビュー",frameRate:"フレームレート",quality:"品質",processing:"バックアップファイルを処理中...",noTimelapses:"利用可能なタイムラプスがありません"},ams:{title:"AMS",slot:"スロット",empty:"<空>",emptySlot:"空のスロット",slotEmpty:"空",emptySlotReset:"スプール未割当",unknown:"不明",humidity:"湿度",temperature:"温度",filamentType:"フィラメントタイプ",filamentColor:"色",remaining:"残り",history:"AMS履歴",noHistory:"メンテナンス履歴がありません",configureSlot:"フィラメントプロファイルとK値でスロットを設定",externalSpool:"外部スプール",profile:"プロファイル",kFactor:"K値",fill:"充填率",configure:"設定",used:"使用済み",remainingUnit:"残り"},printModal:{title:"印刷を開始",selectPrinter:"プリンターを選択",selectPlate:"プレートを選択",filamentMapping:"フィラメントマッピング",totalCost:"合計コスト:",slotRemainingShort:" - 残{{grams}}g",printSettings:"印刷設定",bedLeveling:"ベッドレベリング",flowCalibration:"フローキャリブレーション",vibrationCalibration:"振動キャリブレーション",layerInspection:"第一層検査",timelapse:"タイムラプス",startPrint:"印刷を開始",addToQueue:"キューに追加",cancel:"キャンセル",noPrintersAvailable:"利用可能なプリンターがありません",printerBusy:"プリンターは使用中です",printerOffline:"プリンターはオフラインです",sameTypeDifferentColor:"同じ種類、異なる色",filamentTypeNotLoaded:"フィラメントタイプが未読み込み",openCalendar:"カレンダーを開く",leftNozzle:"L",rightNozzle:"R",leftNozzleTooltip:"左ノズル",rightNozzleTooltip:"右ノズル",filamentOverride:"フィラメントオーバーライド",filamentOverrideHint:"モデルベースの割り当てに使用するフィラメントをオプションで上書きします。スケジューラは元の3MF値ではなく、選択したフィラメントに基づいてマッチングします。",originalFilament:"オリジナル",overrideWith:"変更先",resetToOriginal:"オリジナルに戻す",insufficientFilamentTitle:"フィラメントが不足しています",insufficientFilamentMessage:"割り当てられたスプールの一部は、この印刷に必要な量より残量が少ないです:",insufficientFilamentLine:"{{printer}} - {{slot}}: 必要 {{required}}g、残り {{remaining}}g",printAnyway:"それでも印刷",forceColorMatch:"カラーマッチを強制",staggerPrinterStarts:"プリンター開始を段階的に",staggerGroupSize:"グループサイズ",staggerInterval:"間隔（分）",staggerPreview:"{{printers}}台のプリンター → {{size}}台ずつ{{groups}}グループ、{{interval}}分ごとに開始",staggerLastGroup:"最終グループ: {{count}}",staggerTotal:"合計: {{minutes}}分",staggerToPrinters:"{{count}}台のプリンターに段階的に送信",gcodeInjection:"自動印刷G-codeを挿入"},backup:{includesEncryptionKey:"ローカルバックアップにはMFA暗号化キーファイル（DATA_DIR/.mfa_encryption_key）が含まれ、バックアップZIPは自己完結型です。ZIPを機密扱いしてください — ファイルを持つ人は誰でも内部のOIDCクライアントシークレットとTOTPシークレットを復号できます。",title:"バックアップと復元",createBackup:"バックアップを作成",restoreBackup:"バックアップの復元",restoreDescription:"バックアップファイルからすべてのデータを置き換える",downloadBackup:"バックアップをダウンロード",uploadBackup:"バックアップをアップロード",lastBackup:"最終バックアップ",autoBackup:"自動バックアップ",backupNow:"今すぐバックアップ",restoreWarning:"警告: バックアップの復元は現在のすべてのデータを上書きします。",includeArchives:"アーカイブを含む",includeSettings:"設定を含む",includeProfiles:"プロファイルを含む",backupSuccess:"バックアップを作成しました",restoreSuccess:"バックアップを復元しました",backupFailed:"バックアップに失敗しました",restoreFailed:"復元に失敗しました",restoreNote:"復元中、仮想プリンターは停止されます",githubBackup:"GitHubバックアップ",enabled:"有効",cloudLoginRequired:"Bambu Cloudログインが必要です。GitHubバックアップを有効にするには、プロファイル → クラウドプロファイルからサインインしてください。",cloudLoginRequiredShort:"Cloudログインが必要",githubDescription:"プロファイルをプライベートGitHubリポジトリに自動的に同期し、バックアップとバージョン履歴を保持します。",repoIsPrivate:"リポジトリはプライベートです — バックアップしても安全です。",repoIsPublicWarning:"リポジトリが公開（PUBLIC）です。Bambuddyのバックアップには MQTT 認証情報、Home Assistant トークン、Prometheus トークン、Bambu Cloud のメールアドレス、K-プロファイル経由のプリンタアクセスコードが含まれます。プロバイダー側でリポジトリをプライベートに変更するまで保存はブロックされます。",repoVisibilityUnknown:"リポジトリの公開設定を確認できませんでした。Bambuddy はプライベートと確認できないリポジトリへのバックアップを拒否します。保存はブロックされます。",repositoryUrl:"リポジトリURL",repoUrlPlaceholderGitHub:"https://github.com/username/repo-name",repoUrlPlaceholderGitea:"https://gitea.example.com/username/repo-name",repoUrlPlaceholderForgejo:"https://forgejo.example.com/username/repo-name",repoUrlPlaceholderGitLab:"https://gitlab.com/username/repo-name",allowInsecureHttp:"安全でないHTTPを許可",allowInsecureHttpHint:"TLSなしのプライベートネットワーク上のセルフホストインスタンスに対して有効化",personalAccessToken:"個人アクセストークン",tokenSaved:"(保存済み)",enterNewToken:"新しいトークンを入力して更新",tokenHint:"Contents読み書き権限を持つきめ細かいトークン",branch:"ブランチ",provider:"Gitプロバイダー",providerGitHub:"GitHub",providerGitLab:"GitLab",providerGitea:"Gitea",providerForgejo:"Forgejo",manualOnly:"手動のみ",hourly:"毎時",daily:"毎日",weekly:"毎週",includeInBackup:"バックアップに含める",kProfiles:"Kプロファイル",kProfilesDescription:"接続されたプリンターからの圧力キャリブレーション",noPrintersConnected:"プリンターが接続されていません",printersConnected:"{{connected}}/{{total}} 接続済み",cloudProfiles:"クラウドプロファイル",cloudProfilesDescription:"Bambu Cloudからのフィラメント、プリンター、プロセスプリセット",appSettings:"アプリ設定",appSettingsDescription:"Bambuddy設定（データベース全体）",spoolInventory:"スプール在庫",spoolInventoryDescription:"フィラメントスプール、使用履歴、コスト追跡",printArchives:"印刷アーカイブ",printArchivesDescription:"印刷履歴メタデータ（gcode/3MFファイルなし）",lastBackupAt:"最終バックアップ:",noBackupsYet:"バックアップはまだありません",next:"次回:",startingBackup:"バックアップを開始しています...",test:"テスト",enableBackup:"バックアップを有効化",testConnection:"接続テスト",enterRepoUrl:"リポジトリURLを入力してください",enterRepoAndToken:"リポジトリURLとアクセストークンを入力してください",repoRequired:"リポジトリURLは必須です",tokenRequired:"アクセストークンは必須です",githubBackupEnabled:"GitHubバックアップが有効になりました",tokenUpdated:"トークンが更新されました",settingsSaved:"設定が保存されました",failedToSave:"保存に失敗しました: {{message}}",backupCompleteFiles:"バックアップ完了 - {{count}}ファイルが更新されました",backupSkippedNoChanges:"バックアップをスキップ - 変更なし",backupFailed2:"バックアップに失敗しました: {{message}}",clearedLogs:"{{count}}件のログを削除しました",failedToClearLogs:"ログの削除に失敗しました: {{message}}",history:"履歴",clear:"クリア",date:"日付",status:"ステータス",commit:"コミット",localBackup:"ローカルバックアップ",localBackupDescription:"データベース、アーカイブ、アップロード、すべてのファイルを含むBambuddyデータの完全なバックアップを作成します。",downloadBackupLabel:"バックアップをダウンロード",completeBackupZip:"完全バックアップ: データベース + 全ファイル (ZIP)",download:"ダウンロード",preparingBackup:"バックアップを準備しています...",creatingArchive:"バックアップアーカイブを作成しています...大きなアーカイブの場合、時間がかかることがあります。",downloadingFile:"バックアップファイルをダウンロードしています...",backupDownloaded:"バックアップのダウンロードが成功しました",failedToCreateBackup:"バックアップの作成に失敗しました: {{message}}",restore:"復元",restoreReplacesAll:"復元はすべてのデータを置き換えます。",restoreReplacesAllDetail:"現在のデータベースとファイルは完全に置き換えられます。復元後に再起動が必要です。",restoreConfirmTitle:"バックアップを復元",restoreConfirmMessage:'"{{filename}}"から復元してもよろしいですか？現在のデータベースとすべてのファイルが完全に置き換えられます。復元後にアプリケーションの再起動が必要です。',restoreConfirmButton:"バックアップを復元",uploadingFile:"バックアップファイルをアップロードしています...",backupRestoredRestart:"バックアップが復元されました。Bambuddyを再起動してください。",failedToRestore:"バックアップの復元に失敗しました。ファイル形式を確認してください。",reloadNow:"今すぐリロード",creatingBackup:"バックアップを作成中",restoringBackup:"バックアップを復元中",preparing:"準備中...",processing:"処理中...",doNotClosePage:"このページを閉じたり、移動しないでください。大きなバックアップの場合、この操作には数分かかることがあります。",restoring:"復元中...",restoreComplete:"復元完了",restoreFailed2:"復元失敗",importSettings:"バックアップファイルから設定をインポート",pleaseWaitRestoring:"データの復元中です。お待ちください",selectBackupFile:"クリックしてバックアップファイルを選択 (.jsonまたは.zip)",duplicateHandling:"重複処理の仕組み:",matchPrinters:"プリンター",matchPrintersBy:"シリアル番号で照合",matchSmartPlugs:"スマートプラグ",matchSmartPlugsBy:"IPアドレスで照合",matchNotificationProviders:"通知プロバイダー",matchNotificationProvidersBy:"名前で照合",matchFilaments:"フィラメント",matchFilamentsBy:"名前 + タイプ + ブランドで照合",matchArchives:"アーカイブ",matchArchivesBy:"コンテンツハッシュで照合（常にスキップ）",matchPendingUploads:"保留中のアップロード",matchPendingUploadsBy:"ファイル名で照合",matchSettingsTemplates:"設定とテンプレート",matchSettingsTemplatesBy:"常に上書き",replaceExisting:"既存のデータを置き換え",keepExisting:"既存のデータを保持",overwriteDescription:"既に存在する項目をバックアップデータで上書き",keepDescription:"まだ存在しない項目のみ復元",overwriteCaution:"注意:",overwriteWarning:"上書きすると、現在の設定がバックアップのデータで置き換えられます。プリンターのアクセスコードはセキュリティのため上書きされません。",cancel:"キャンセル",processingBackup:"バックアップファイルを処理しています...",itemsRestored:"復元済み",itemsSkipped:"スキップ済み",restored:"復元済み",skippedAlreadyExist:"スキップ（既に存在）",filesCategory:"ファイル（3MF、サムネイルなど）",andMore:"...他{{count}}件",newApiKeysGenerated:"新しいAPIキーが生成されました",keysShownOnce:"これらのキーは一度だけ表示されます。今すぐコピーしてください！",copy:"コピー",noDataFound:"バックアップファイルに復元するデータが見つかりませんでした。",close:"閉じる",scheduledBackup:"スケジュールされたバックアップ",scheduledBackupDescription:"スケジュールに基づいてバックアップスナップショットを自動作成。出力ディレクトリはNASや外部ストレージにマウント可能。",frequency:"頻度",backupTime:"時間",retention:"保持期間",retentionDescription:"保持するバックアップ数",outputPath:"出力パス",outputPathPlaceholder:"デフォルト: {{path}}",outputPathDescription:"デフォルトの場所を使用する場合は空白のまま",runNow:"今すぐ実行",backupFiles:"バックアップファイル",noScheduledBackups:"バックアップなし",deleteBackup:"削除",deleteBackupConfirm:"このバックアップファイルを削除しますか？",backupRunning:"バックアップ中...",scheduledBackupComplete:"バックアップが正常に完了しました",scheduledBackupFailed:"バックアップに失敗",nextBackup:"次回バックアップ",backupSize:"サイズ",localTimeHint:"現地時刻 ({{tz}})",defaultPathLabel:"デフォルト:",categories:{settings:"設定",notification_providers:"通知プロバイダー",notification_templates:"通知テンプレート",smart_plugs:"スマートプラグ",printers:"プリンター",filaments:"フィラメント",maintenance_types:"メンテナンスタイプ",archives:"アーカイブ",projects:"プロジェクト",pending_uploads:"保留中のアップロード",external_links:"外部リンク",api_keys:"APIキー"}},tags:{title:"タグ",addTag:"タグを追加",editTag:"タグを編集",deleteTag:"タグを削除",tagName:"タグ名",tagColor:"タグの色",noTags:"タグがありません",deleteConfirm:"このタグを削除しますか？",manageTags:"タグを管理"},uploadModal:{title:"3MFファイルのアップロード",dragDrop:".3mfファイルをここにドラッグ＆ドロップ",or:"または",browseFiles:"ファイルを参照",extractionInfo:"プリンターモデルは3MFファイルのメタデータから自動的に抽出されます。",uploaded:"アップロード済み",failed:"アップロードに失敗しました",uploading:"アップロード中...",upload:"アップロード",uploadFailed:"アップロード失敗"},editArchive:{title:"アーカイブを編集",name:"名前",namePlaceholder:"印刷名",printer:"プリンター",noPrinter:"プリンターなし",project:"プロジェクト",noProject:"プロジェクトなし",itemsPrinted:"印刷数",itemsPrintedHelp:"この印刷ジョブで製造したアイテム数",notes:"メモ",notesPlaceholder:"この印刷についてメモを追加...",externalLink:"外部リンク",externalLinkPlaceholder:"https://...",externalLinkHelp:"Printables、Thingiverse、その他のソースへのリンク",tags:"タグ",tagsPlaceholder:"タグを追加...",addMoreTags:"タグをさらに追加...",matchingTags:'"{{query}}" に一致',existingTags:"既存のタグ",clickToAdd:"（クリックして追加）",status:"ステータス",failureReason:"失敗理由",selectReason:"理由を選択...",photos:"印刷結果の写真",photosHelp:"+ をクリックして印刷結果の写真を追加",printResult:"印刷結果",saving:"保存中...",failureReasons:{adhesionFailure:"定着不良",spaghettiDetached:"スパゲッティ / 剥離",layerShift:"レイヤーシフト",cloggedNozzle:"ノズル詰まり",filamentRunout:"フィラメント切れ",warping:"反り",stringing:"糸引き",underExtrusion:"押出不足",powerFailure:"電源障害",userCancelled:"ユーザーによるキャンセル",other:"その他"},statuses:{completed:"完了",failed:"失敗",aborted:"キャンセル",printing:"印刷中"}},kProfiles:{title:"Kプロファイル",noPrintersConfigured:"プリンターが設定されていません",addPrinterInSettings:"Kプロファイルを管理するには設定でプリンターを追加してください",noActivePrinters:"アクティブなプリンターがありません",enablePrinterConnection:"Kプロファイルを表示するにはプリンター接続を有効にしてください",loadingProfiles:"Kプロファイルを読み込み中...",printerOffline:"プリンターオフライン",printerOfflineDesc:"選択したプリンターは接続されていません。電源を入れてKプロファイルを表示してください。",noMatchingProfiles:"一致するプロファイルなし",noMatchingProfilesDesc:"検索条件に一致するプロファイルがありません",noKProfiles:"Kプロファイルなし",noKProfilesDesc:"{{diameter}}mmノズル用の圧力キャリブレーションプロファイルが見つかりません",createFirstProfile:"最初のプロファイルを作成",printer:"プリンター",nozzle:"ノズル",refresh:"更新",addProfile:"K-プロファイルを追加",export:"エクスポート",import:"インポート",select:"選択",selectAll:"すべて選択",delete:"削除",searchPlaceholder:"名前またはフィラメントで検索...",allExtruders:"すべてのエクストルーダー",leftOnly:"左のみ",rightOnly:"右のみ",allFlow:"すべてのフロー",hfOnly:"HFのみ",sOnly:"Sのみ",sortName:"ソート: 名前",sortKValue:"ソート: K値",sortFilament:"ソート: フィラメント",leftExtruder:"左エクストルーダー",rightExtruder:"右エクストルーダー",modal:{addTitle:"Kプロファイルを追加",editTitle:"Kプロファイルを編集",profileName:"プロファイル名",profileNamePlaceholder:"マイPLAプロファイル",kValue:"K値",kValuePlaceholder:"0.020",kValueHelp:"一般的な範囲: PLA 0.01〜0.06、PETG 0.02〜0.10",filament:"フィラメント",selectFilament:"フィラメントを選択...",noFilamentsHelp:"フィラメントが見つかりません。Bambu Studioでまずプロファイルを作成してください。",flowType:"フロータイプ",highFlow:"ハイフロー",standard:"スタンダード",nozzleSize:"ノズルサイズ",extruder:"エクストルーダー",extruders:"エクストルーダー",left:"左",right:"右",notes:"メモ（ローカル保存）",notesPlaceholder:"このプロファイルのメモを追加...",notesHelp:"メモはBambuddyに保存され、プリンターには保存されません",syncing:"プリンターと同期中...",savingExtruder:"エクストルーダーに保存中 {{current}}/{{total}}...",pleaseWait:"お待ちください"},deleteConfirm:{title:"プロファイルを削除",cannotUndo:"元に戻せません",message:"「{{name}}」をプリンターから削除しますか？"},bulkDelete:{title:"プロファイルを削除",cannotUndo:"元に戻せません",message:"選択した{{count}}件のプロファイルをプリンターから削除しますか？"},toast:{profileSaved:"Kプロファイルを保存しました",profilesSaved:"Kプロファイルを{{count}}台のエクストルーダーに保存しました",selectAtLeastOneExtruder:"エクストルーダーを1つ以上選択してください",profileDeleted:"Kプロファイルを削除しました",profilesDeleted:"{{count}}件のプロファイルを削除しました",exportedProfiles:"{{count}}件のプロファイルをエクスポートしました",importedProfiles:"{{total}} 件中 {{count}} 件のプロファイルをインポートしました",noProfilesToExport:"エクスポートするプロファイルがありません",invalidFileFormat:"無効なファイル形式",failedToParseImport:"インポートファイルの解析に失敗しました",failedToSaveBatch:"Kプロファイルの保存に失敗しました",noteSaved:"メモを保存しました",failedToSaveNote:"メモの保存に失敗しました"},permission:{noRead:"プロファイルを更新する権限がありません",noCreate:"プロファイルを追加する権限がありません",noUpdate:"Kプロファイルを更新する権限がありません",noDelete:"Kプロファイルを削除する権限がありません",noExport:"プロファイルをエクスポートする権限がありません",noImport:"プロファイルをインポートする権限がありません"}},virtualPrinter:{title:"仮想プリンター",running:"稼働中",stopped:"停止",description:{default:"Bambu StudioとOrcaSlicerに表示される仮想プリンターを有効化。このプリンターに送信されたファイルは印刷せずに直接アーカイブされます。",proxy:"スライサーのトラフィックを実際のプリンターに転送するプロキシを有効化。任意のネットワーク経由でリモート印刷が可能です。"},enable:{title:"仮想プリンターを有効化",visibleInSlicer:"スライサーの検出リストに「Bambuddy」として表示",proxyingTo:"{{name}}にプロキシ中",notActive:"非アクティブ"},model:{title:"プリンターモデル",description:"エミュレートするプリンターモデルを選択。",restartWarning:"モデルを変更すると仮想プリンターが再起動されます"},accessCode:{title:"アクセスコード",isSet:"アクセスコードが設定されています",notSet:"アクセスコード未設定 - 有効化に必要です",placeholder:"8文字のコードを入力",placeholderChange:"新しいコードを入力して変更",hint:"正確に8文字必要です。スライサーの認証に使用されます。",charCount:"({{count}}/8)"},targetPrinter:{title:"ターゲットプリンター",configured:"プロキシターゲット設定済み",notConfigured:"ターゲットプリンター未選択 - プロキシモードに必要です",placeholder:"プリンターを選択...",hint:"スライサートラフィックの転送先プリンターを選択。プリンターはLANモードである必要があります。",noPrinters:"プリンターが設定されていません。プロキシモードを使用するにはまずプリンターを追加してください。"},remoteInterface:{title:"ネットワークインターフェース上書き",configured:"インターフェース上書き有効",optional:"オプション — 自動検出IPが間違っている場合に使用（複数NIC、Docker、VPNなど）",placeholder:"自動検出（デフォルト）...",hint:"SSDPで広告され、TLS証明書に使用されるIPアドレスを上書きします。Bambuddyに複数のネットワークインターフェースがある場合に便利です。"},mode:{title:"モード",archive:"アーカイブ",archiveDesc:"ファイルを即座にアーカイブ",review:"レビュー",reviewDesc:"アーカイブ前にレビュー",queue:"キュー",queueDesc:"アーカイブしてキューに追加",proxy:"プロキシ",proxyDesc:"実際のプリンターに転送"},autoDispatch:{title:"自動ディスパッチ",description:"キューに追加されたときに自動的に印刷を開始します。オフの場合、手動ディスパッチを待ちます。"},queueForceColorMatch:{title:"色の一致を強制",description:"正確なフィラメントタイプと色がロードされていないプリンターへの送信を拒否します。デフォルトはオフ — これがないと、キューはモデルのみのマッチングを使用し、間違った色がロードされたプリンターを選ぶ可能性があります。"},tailscaleDisabled:{title:"Tailscale統合",description:"このVPがTailscale経由で公開されていることをマークするには有効にしてください。スライサーに貼り付けるIPがわかるよう、ホストのTailscaleアドレスを表示します。CAインポート手順は変更されません — このトグルは証明書に影響しません。"},setupRequired:{title:"セットアップが必要です",description:"仮想プリンター機能を使用するには追加のシステム設定が必要です。ポートフォワーディング、ファイアウォールルール、プラットフォーム固有の設定が含まれます。",readGuide:"有効にする前にセットアップガイドをお読みください"},howItWorks:{title:"仕組み",step1:"同じLAN上では、仮想プリンターはスライサー（Bambu Studio / OrcaSlicer）に自動的に表示されます。他のネットワークからは、IPアドレスとアクセスコードで手動で追加してください。",step2:"アーカイブ、レビュー、キューモードでは、スライサーの「送信」ボタンを使用して3MFファイルをBambuddyにアップロードします。スライサーは「印刷成功」と表示しますが、ファイルは保存され、印刷はされません。",step3:"プロキシモードでは、仮想プリンターはすべてのトラフィックを実際のプリンターに転送します。直接接続されているかのように印刷がすぐに開始されます。"},status:{title:"ステータス詳細",printerName:"プリンター名",model:"モデル",serialNumber:"シリアル番号",mode:"モード",pendingFiles:"保留中のファイル",targetPrinter:"ターゲットプリンター",ftpPort:"FTPポート",mqttPort:"MQTTポート",ftpConnections:"FTP接続数",mqttConnections:"MQTT接続数"},toast:{updated:"仮想プリンター設定を更新しました",failedToUpdate:"設定の更新に失敗しました",copyFailed:"コピーに失敗しました — テキストを手動で選択してください",accessCodeRequired:"先にアクセスコードを設定してください",targetPrinterRequired:"先にターゲットプリンターを選択してください",bindIpRequired:"先にバインドIPを設定してください",accessCodeEmpty:"アクセスコードは空にできません",accessCodeLength:"アクセスコードは8文字である必要があります",created:"仮想プリンターを作成しました",failedToCreate:"仮想プリンターの作成に失敗しました",deleted:"仮想プリンターを削除しました",failedToDelete:"仮想プリンターの削除に失敗しました"},list:{title:"仮想プリンター",add:"追加",addFirst:"仮想プリンターを追加",empty:"仮想プリンターが設定されていません。追加して始めましょう。"},bindIp:{title:"バインドインターフェース",placeholder:"インターフェースを選択...",hint:"この仮想プリンターがバインドするネットワークインターフェース。プリンターごとに一意である必要があります。"},proxy:{accessCodeHint:"プロキシモードでは、スライサーにターゲットプリンターのアクセスコードを使用してください。接続は実際のプリンターに透過的に転送されます。"},addDialog:{title:"仮想プリンターを追加",name:"名前",hint:"アクセスコード、ターゲットプリンター、その他の設定は作成後に設定できます。",create:"作成"},deleteConfirm:{title:"仮想プリンターを削除",message:"「{{name}}」を削除してもよろしいですか？このプリンターのすべてのサービスが停止されます。"},archiveNameSource:{title:"アーカイブ名のソース",description:"仮想プリンター経由でファイルが到着したときに、新しいアーカイブをどのように命名するかを選択します。「メタデータ」は3MFに埋め込まれたスライサータイトル（デフォルト）を使用します。「ファイル名」はBambu StudioがFTPで送信したファイル名を使用します — 「プリンターに送信」ダイアログでジョブ名を変更した場合に便利です。",metadata:"メタデータ",filename:"ファイル名"},caCert:{title:"スライサー証明書",description:"仮想プリンターは Bambuddy CA が署名した TLS 証明書を使用します。この CA 証明書をスライサーの信頼ストアに一度インポートすると接続が受け入れられます — コマンドラインからコピーする必要はありません。",copy:"コピー",copied:"コピーしました",download:"ダウンロード",fingerprint:"SHA-256"}},modelViewer:{openInSlicer:"スライサーで開く",tabs:{model:"3Dモデル",gcode:"G-codeプレビュー"},notAvailable:"利用不可",notSliced:"未スライス",plates:"プレート",allPlates:"全プレート",plateNumber:"プレート {{number}}",plateCount:"{{count}} プレート",plateCount_other:"{{count}} プレート",objectCount:"{{count}} オブジェクト",objectCount_other:"{{count}} オブジェクト",filamentCount:"{{count}} フィラメント",filamentCount_other:"{{count}} フィラメント",eta:"予想時間 {{minutes}} 分",noPreview:"このファイルのプレビューは利用できません",pagination:{pageOf:"ページ {{current}} / {{total}}",prev:"前へ",next:"次へ"},errors:{failedToLoad:"ファイルの読み込みに失敗しました",noMeshes:"3MFファイルにメッシュが見つかりません",unsupportedFormat:"サポートされていないファイル形式です"}},maintenanceDescriptions:{lubricateCarbonRods:"カーボンロッドに潤滑剤を塗布してスムーズな動きを確保",lubricateRails:"リニアレールの潤滑",cleanNozzle:"ノズル/ホットエンドの清掃",checkBelts:"ベルト張力の確認",cleanBuildPlate:"ビルドプレートの清掃",checkExtruder:"エクストルーダーギアの確認",checkCooling:"冷却ファンの確認",generalInspection:"総合点検",cleanCarbonRods:"カーボンロッドの清掃",lubricateSteelRods:"スチールロッドに潤滑剤を塗布してスムーズな動きを確保",cleanSteelRods:"スチールロッドの清掃",cleanLinearRails:"リニアレールを拭いてほこりや汚れを除去",checkPtfeTube:"PTFEチューブの確認",replaceHepaFilter:"HEPAフィルター交換",replaceCarbonFilter:"カーボンフィルター交換",lubricateLeftNozzleRail:"左ノズルレールの潤滑"},smartPlugs:{offline:"オフライン",admin:"管理",openPlugAdminPage:"プラグ管理ページを開く",deleteSmartPlug:"スマートプラグを削除",turnOnSmartPlug:"スマートプラグをオンにする",turnOffSmartPlug:"スマートプラグをオフにする",turnOn:"オンにする",turnOff:"オフにする",addSmartPlug:{scanningNetwork:"ネットワークをスキャン中...",chooseEntity:"エンティティを選択...",connectionFailed:"接続失敗",searchEntities:"エンティティを検索...",searchPowerSensors:"電力センサーを検索...",searchEnergySensors:"エネルギーセンサーを検索...",placeholders:{plugName:"リビングルームプラグ",mqttStateOnValue:"ON, true, 1",mqttSameAsPower:"電力トピックと同じ、または異なる"}},linkedTo:"リンク先:",monitorOnly:"監視のみ",alerts:"アラート",scheduleOn:"オン {{time}}",scheduleOff:"オフ {{time}}",on:"オン",off:"オフ",power:"電力",kwhToday:"本日のkWh",settings:"設定",automationSettings:"自動化設定",showInSwitchbar:"スイッチバーに表示",quickAccessSidebar:"サイドバーからクイックアクセス",enabled:"有効",enableAutomation:"このプラグの自動化を有効にする",autoOn:"自動オン",autoOnDescription:"印刷開始時にオンにする",autoOff:"自動オフ",autoOffDescription:"印刷完了時にオフにする（ワンショット）",autoOffPersistent:"有効のまま維持",autoOffPersistentDescription:"ワンショットではなく印刷間で有効のまま維持",autoOffAfterDrying:"乾燥完了後に自動オフ",autoOffAfterDryingDescription:"AMSの乾燥が完了したらオフにする",delayAfterDryingMinutes:"乾燥後の遅延（分）",turnOffDelayMode:"オフ遅延モード",time:"時間",temp:"温度",delayMinutes:"遅延（分）",tempThreshold:"温度しきい値（°C）",tempThresholdDescription:"ノズルがこの温度以下に冷却されるとオフになります",edit:"編集",deleteConfirm:'"{{name}}"を削除してもよろしいですか？この操作は取り消せません。',turnOnConfirm:'"{{name}}"をオンにしてもよろしいですか？',turnOffConfirm:'"{{name}}"をオフにしてもよろしいですか？接続されたデバイスの電源が切れます。',failedToTurn:'"{{name}}"を{{action}}できませんでした',unknown:"不明",addTitle:"スマートプラグを追加",editTitle:"スマートプラグを編集",stopScanning:"スキャン停止",discoverTasmota:"Tasmotaデバイスを検出",foundDevices:"{{count}}台のデバイスが見つかりました - クリックして選択:",noDevicesFound:"ネットワーク上にTasmotaデバイスが見つかりません",haNotConfigured:"Home Assistantが設定されていません。設定場所:",haSettingsPath:"設定 → ネットワーク → Home Assistant",selectEntity:"エンティティを選択 *",ipAddress:"IPアドレス *",nameLabel:"名前 *",username:"ユーザー名",password:"パスワード",authHint:"Tasmotaデバイスが認証を必要としない場合は空のままにしてください",linkToPrinter:"プリンターにリンク",noPrinter:"プリンターなし（手動制御のみ）",linkingDescription:"リンクすると印刷開始/完了時に自動でオン/オフできます",powerAlerts:"電力アラート",alertAbove:"上限アラート（W）",alertBelow:"下限アラート（W）",alertDescription:"電力消費がこれらのしきい値を超えた場合に通知します。無効にするには空のままにしてください。",dailySchedule:"デイリースケジュール",turnOnAt:"オンにする時刻",turnOffAt:"オフにする時刻",scheduleDescription:"毎日これらの時刻にプラグを自動的にオン/オフします。スキップするには空のままにしてください。",showOnPrinterCard:"プリンターカードに表示",displayOnPrinterCard:"プリンターカードにボタンを表示",connectedResult:"接続成功！",deviceLabel:"デバイス: {{name}} - ",stateLabel:"状態: {{state}}",test:"テスト",delete:"削除",save:"保存",add:"追加",cancel:"キャンセル",failedToStartScan:"スキャンを開始できませんでした",nameRequired:"名前は必須です",entityRequired:"Home AssistantプラグにはエンティティIDが必要です",mqttTopicRequired:"電力、エネルギー、または状態監視用に少なくとも1つのMQTTトピックを設定する必要があります",loadingEntities:"エンティティを読み込み中...",loading:"読み込み中...",failedToLoadEntities:"エンティティの読み込みに失敗しました: {{error}}",noEntitiesMatching:'"{{search}}"に一致するエンティティが見つかりません',noEntitiesAvailable:"利用可能なエンティティがありません",searchingEntities:"すべてのエンティティを検索中（{{count}}件見つかりました）",showingEntities:"switch、light、input_booleanを表示（{{count}}件利用可能）",energyMonitoringOptional:"エネルギー監視（オプション）",energyMonitoringHint:"電力/エネルギーデータを提供するセンサーを検索して選択します。",powerSensorW:"電力センサー（W）",energyTodayKwh:"本日のエネルギー（kWh）",totalEnergyKwh:"総エネルギー（kWh）",noMatchingSensors:"一致するセンサーがありません",none:"なし",mqttNotConfigured:"MQTTブローカーが設定されていません。ブローカーアドレスを設定してください:",mqttSettingsPath:"設定 → ネットワーク → MQTT配信",mqttNotConfiguredSuffix:"（配信を有効にする必要はありません。ブローカーの詳細を入力するだけです）。",mqttMonitorOnlyDescription:"MQTTプラグはMQTTサブスクリプション経由で電力/エネルギーデータを受信します。オン/オフ制御は利用できません - MQTTブローカーまたはホームオートメーションシステムを使用してください。",powerMonitoring:"電力監視",energyMonitoring:"エネルギー監視",stateMonitoring:"状態監視",optional:"オプション",topic:"トピック",jsonPath:"JSONパス",multiplier:"乗数",onValue:"ON値",mqttPowerHint:`JSONパスはJSONペイロードから値を抽出します（例: "power_l1"）。トピックが生の数値を送信する場合は空のままにしてください。
+Valeur ON : la chaîne exacte signifiant "ON". Laisser vide pour la détection auto (ON, true, 1).`,restControl:"Contrôle",restOnUrl:"URL d'activation",restOffUrl:"URL de désactivation",restOnBody:"Corps de requête ON",restOffBody:"Corps de requête OFF",restMethod:"Méthode HTTP",restHeaders:"Custom Headers (JSON)",restStatusUrl:"URL de statut",restStatusPath:"Chemin JSON état",restStatusOnValue:"Valeur ON",restPowerUrl:"URL de puissance",restPowerPath:"Chemin JSON puissance",restPowerMultiplier:"Multiplicateur de puissance",restEnergyUrl:"URL d'énergie",restEnergyPath:"Chemin JSON énergie",restEnergyMultiplier:"Multiplicateur d'énergie",restUrlRequired:"Au moins une URL (ON ou OFF) est requise pour les prises REST",restHeadersHint:'par ex. {"Authorization": "Bearer your-token"}',restBodyHint:'par ex. ON, {"state": "on"}',restStatusHint:"URL pour interroger l'état actuel",restPathHint:"par ex. state ou data.power.status",restPowerUrlHint:"URL séparée pour les données de puissance (utilise l'URL de statut si vide)",restEnergyUrlHint:"URL séparée pour les données d'énergie (utilise l'URL de statut si vide)",restEnergyHint:"Chaque valeur peut utiliser sa propre URL ou se rabattre sur l'URL de statut. Utilisez les multiplicateurs pour la conversion d'unités (ex : 0.001 pour convertir Wh en kWh).",testConnection:"Tester la connexion",connectionSuccess:"Connexion réussie",noSwitchesInSwitchbar:"Aucun commutateur dans la barre",enableSwitchbarHint:'Activez "Afficher dans la barre de commutateurs" dans Paramètres > Smart Plugs'},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"E-mail",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"Notifications par e-mail SMTP",telegram:"Notifications via un bot Telegram",discord:"Envoyer vers un canal Discord via webhook",ntfy:"Notifications push gratuites, auto-hébergeables",pushover:"Notifications push simples et fiables",callmebot:"Notifications WhatsApp gratuites via CallMeBot",webhook:"POST HTTP générique vers n'importe quelle URL",homeassistant:"Notifications persistantes dans le tableau de bord Home Assistant"},lastSuccess:"Dernier : {{date}}",error:"Erreur",printer:"Imprimante :",allPrinters:"Toutes les imprimantes",sendTestNotification:"Envoyer une notification de test",eventSettings:"Paramètres des événements",enabled:"Activé",sendFromProvider:"Envoyer des notifications depuis ce fournisseur",printEvents:"Événements d'impression",printerStatus:"État de l'imprimante",amsAlarms:"Alarmes AMS",amsHtAlarms:"Alarmes AMS-HT",printQueue:"File d'attente d'impression",start:"Début",plateCheck:"Vérification du plateau",complete:"Terminé",failed:"Échoué",stopped:"Arrêté",progress:"Progression",offline:"Hors ligne",lowFilament:"Filament bas",maintenance:"Maintenance",amsHumidity:"Humidité AMS",amsTemp:"Temp. AMS",amsHtHumidity:"Humidité AMS-HT",amsHtTemp:"Temp. AMS-HT",bedCooled:"Plateau refroidi",firstLayer:"Première couche",quiet:"Silencieux",digest:"Résumé {{time}}",printStarted:"Impression démarrée",plateNotEmpty:"Plateau non vide",plateNotEmptyDescription:"Objets détectés avant l'impression",printCompleted:"Impression terminée",bedCooledLabel:"Plateau refroidi",bedCooledDescription:"Plateau refroidi sous le seuil après l'impression",firstLayerCompleteLabel:"Première couche terminée",firstLayerCompleteDescription:"Notification avec photo après la première couche",missingSpoolAssignmentLabel:"Affectation de bobine manquante",missingSpoolAssignmentDescription:"Notifier quand une impression démarre et que des bacs requis n'ont pas de bobine assignée",printFailed:"Impression échouée",printStopped:"Impression arrêtée",progressMilestones:"Jalons de progression",progressMilestonesDescription:"Notifier à 25 %, 50 %, 75 %",printerOffline:"Imprimante hors ligne",printerError:"Erreur de l'imprimante",lowFilamentLabel:"Filament bas",maintenanceDue:"Maintenance requise",maintenanceDueDescription:"Notifier lorsqu'une maintenance est nécessaire",amsHumidityHigh:"Humidité AMS élevée",amsHumidityHighDescription:"L'humidité de l'AMS standard dépasse le seuil",amsTemperatureHigh:"Température AMS élevée",amsTemperatureHighDescription:"La température de l'AMS standard dépasse le seuil",amsHtHumidityHigh:"Humidité AMS-HT élevée",amsHtHumidityHighDescription:"L'humidité de l'AMS-HT dépasse le seuil",amsHtTemperatureHigh:"Température AMS-HT élevée",amsHtTemperatureHighDescription:"La température de l'AMS-HT dépasse le seuil",inventoryAlerts:"Alertes de stock",stockReorderAlert:"Alerte de réapprovisionnement",stockReorderAlertDescription:"Le SKU a atteint son point de réapprovisionnement",stockBreakAlert:"Alerte de rupture de stock",stockBreakAlertDescription:"Le stock sera épuisé avant l'arrivée du réapprovisionnement",jobAdded:"Tâche ajoutée",jobAddedDescription:"Tâche ajoutée à la file d'attente",jobAssigned:"Tâche assignée",jobAssignedDescription:"Tâche basée sur le modèle assignée à l'imprimante",jobStarted:"Tâche démarrée",jobStartedDescription:"La tâche de la file a commencé l'impression",jobWaiting:"Tâche en attente",jobWaitingDescription:"Tâche en attente de filament ou imprimante",jobSkipped:"Tâche ignorée",jobSkippedDescription:"Tâche ignorée (échec précédent)",jobFailed:"Tâche échouée",jobFailedDescription:"La tâche n'a pas pu démarrer",queueComplete:"File d'attente terminée",queueCompleteDescription:"Toutes les tâches de la file sont terminées",quietHours:"Heures silencieuses",noNotificationsDuring:"Aucune notification pendant ces heures",editProviderToChangeQuietHours:"Modifier le fournisseur pour changer les heures silencieuses",dailyDigest:"Résumé quotidien",batchNotifications:"Regrouper les notifications en un seul résumé quotidien",sendAt:"Envoyer à {{time}}",editProviderToChangeDigestTime:"Modifier le fournisseur pour changer l'heure du résumé",edit:"Modifier",deleteProvider:"Supprimer le fournisseur de notifications",deleteConfirm:"Êtes-vous sûr de vouloir supprimer « {{name}} » ? Cette action est irréversible.",delete:"Supprimer",addTitle:"Ajouter un fournisseur de notifications",editTitle:"Modifier le fournisseur de notifications",nameLabel:"Nom *",namePlaceholder:"Mes notifications",providerTypeLabel:"Type de fournisseur *",configuration:"Configuration",testConfiguration:"Tester la configuration",printerFilter:"Filtre d'imprimante",onlyFromPrinter:"Envoyer uniquement les notifications pour les événements de cette imprimante",quietHoursDnd:"Heures silencieuses (Ne pas déranger)",quietStart:"Début",quietEnd:"Fin",dailyDigestLabel:"Résumé quotidien",sendDigestAt:"Envoyer le résumé à",digestCollected:"Les événements seront collectés et envoyés en un seul résumé à cette heure",notificationEvents:"Événements de notification",progressPercent:"(25 %, 50 %, 75 %)",bedCooledAfterPrint:"(après la fin de l'impression)",eventPriority:{sectionTitle:"Priorité ntfy",helpNtfy:"Choisissez une priorité pour chaque événement activé. ntfy l'utilise pour faire remonter les alertes (son, visibilité, comportement push). Les niveaux non définis ici utilisent la valeur par défaut du serveur ntfy.",min:"Min.",low:"Basse",default:"Par défaut",high:"Haute",urgent:"Urgente"},cancel:"Annuler",save:"Enregistrer",add:"Ajouter",nameRequired:"Le nom est requis",fieldRequired:"{{field}} est requis",phoneNumber:"Numéro de téléphone",apiKey:"Clé API",serverUrl:"URL du serveur",topic:"Sujet",authToken:"Jeton d'authentification",userKey:"Clé utilisateur",appToken:"Jeton d'application",priority:"Priorité",botToken:"Jeton du bot",chatId:"ID du chat",smtpServer:"Serveur SMTP",smtpPort:"Port SMTP",security:"Sécurité",authentication:"Authentification",username:"Nom d'utilisateur",password:"Mot de passe",fromEmail:"E-mail expéditeur",toEmail:"E-mail destinataire",webhookUrl:"URL du webhook",payloadFormat:"Format du payload",authorization:"Autorisation",titleFieldName:"Nom du champ titre",messageFieldName:"Nom du champ message",editTemplate:"Modifier le modèle : {{name}}",titleLabel:"Titre",bodyLabel:"Corps",titlePlaceholder:"Titre de la notification...",bodyPlaceholder:"Corps de la notification...",availableVariables:"Variables disponibles",clickToInsert:"Cliquer pour insérer à la position du curseur dans le corps",livePreview:"Aperçu en direct",hide:"Masquer",show:"Afficher",loadingPreview:"Chargement de l'aperçu...",enterTemplateContent:"Saisir le contenu du modèle pour voir l'aperçu",titlePreview:"Titre :",bodyPreview:"Corps :",resetToDefault:"Réinitialiser par défaut",titleRequired:"Le titre est requis",bodyRequired:"Le corps est requis",notificationLog:"Journal des notifications",showFailedOnly:"Échecs uniquement",last24Hours:"Dernières 24 heures",last7Days:"7 derniers jours",last30Days:"30 derniers jours",last90Days:"90 derniers jours",justNow:"À l'instant",noFailedNotifications:"Aucune notification échouée",noNotificationsLogged:"Aucune notification enregistrée",unknownProvider:"Fournisseur inconnu",logTitle:"Titre",logMessage:"Message",logError:"Erreur",logProvider:"Fournisseur : {{type}}",logTime:"Heure : {{time}}",refresh:"Actualiser",clearOld:"Purger les anciens",statsSummary:"{{days}} derniers jours :",statsNotifications:"notifications",statsSent:"{{count}} envoyées",statsFailed:"{{count}} échouées",eventTypes:{print_start:"Impression démarrée",print_complete:"Impression terminée",print_failed:"Impression échouée",print_stopped:"Impression arrêtée",print_progress:"Progression",printer_offline:"Imprimante hors ligne",printer_error:"Erreur de l'imprimante",filament_low:"Filament bas",maintenance_due:"Maintenance requise",test:"Tester"},userEmail:{title:"Notifications",emailNotifications:"Notifications par e-mail",emailNotificationsDesc:"Recevez des notifications par e-mail pour vos propres travaux d'impression. Les e-mails sont envoyés via les paramètres SMTP configurés dans l'authentification avancée.",sendingTo:"Les notifications seront envoyées à",noEmailWarning:"Votre compte n'a pas d'adresse e-mail. Contactez un administrateur pour en ajouter une.",printJobNotifications:"Notifications de travaux d'impression",printJobNotificationsDesc:"Choisissez quels événements déclenchent des notifications par e-mail pour les travaux d'impression que vous soumettez.",printJobStarts:"Démarrage du travail d'impression",printJobStartsDesc:"Être notifié quand votre travail d'impression commence.",printJobFinishes:"Fin du travail d'impression",printJobFinishesDesc:"Être notifié quand votre travail d'impression se termine avec succès.",printErrors:"Erreurs d'impression",printErrorsDesc:"Être notifié quand votre travail d'impression échoue ou rencontre une erreur.",printJobStops:"Travail d'impression arrêté",printJobStopsDesc:"Être notifié quand votre travail d'impression est annulé ou arrêté.",saveSuccess:"Préférences de notification sauvegardées.",saveError:"Impossible de sauvegarder les préférences de notification."}},richTextEditor:{bold:"Gras",italic:"Italique",underline:"Souligné",bulletList:"Liste à puces",numberedList:"Liste numérotée",alignLeft:"Aligner à gauche",alignCenter:"Centrer",alignRight:"Aligner à droite",addLink:"Ajouter lien",removeLink:"Retirer lien"},externalLinks:{noLinksConfigured:"Aucun lien externe configuré",deleteLink:"Supprimer lien",removeCustomIcon:"Retirer icône personnalisée",openInNewTab:"Ouvrir dans un nouvel onglet",placeholders:{linkName:"Mon Lien"}},keyboardShortcuts:{title:"Raccourcis Clavier",navigation:"Navigation",archivesSection:"Archives",kProfilesSection:"Profils K",generalSection:"Général",shortcuts:{goToPrinters:"Aller aux Imprimantes",goToArchives:"Aller aux Archives",goToQueue:"Aller à la File",goToStats:"Aller aux Stats",goToProfiles:"Aller aux Profils Cloud",goToSettings:"Aller aux Paramètres",focusSearch:"Focus recherche",openUploadModal:"Ouvrir téléversement",clearSelection:"Tout déselectionner",contextMenu:"Menu contextuel (cartes)",refreshProfiles:"Rafraîchir profils",newProfile:"Nouveau profil",exitSelectionMode:"Quitter mode sélection",showHelp:"Afficher cette aide"},footer:"Échap ou clic extérieur pour fermer"},notificationLog:{title:"Journal de Notification",events:{printStarted:"Début impression",printComplete:"Fin impression",printFailed:"Échec impression",printStopped:"Arrêt impression",progress:"Progression",printerOffline:"Hors ligne",printerError:"Erreur",lowFilament:"Filament bas",maintenanceDue:"Maintenance",test:"Tester"},timeAgo:{justNow:"À l'instant",minutesAgo:"Il y a {{minutes}}m",hoursAgo:"Il y a {{hours}}h"}},restoreBackup:{title:"Restaurer Sauvegarde",restoring:"Restauration...",restoreComplete:"Restauration terminée",restoreFailed:"Échec restauration",importSettings:"Importer les réglages d'un fichier",pleaseWait:"Patientez pendant la restauration",clickToSelect:"Fichier .json ou .zip",howDuplicateHandling:"Gestion des doublons :",categories:{printers:"Imprimantes",smartPlugs:"Prises",notificationProviders:"Fournisseurs",filaments:"Filaments",archives:"Archives",pendingUploads:"Téléversements en attente",settingsTemplates:"Réglages & Modèles"},matchingInfo:{printers:"par numéro de série",smartPlugs:"par adresse IP",notificationProviders:"par nom",filaments:"par nom+type+marque",archives:"par empreinte numérique (hash)",pendingUploads:"par nom de fichier",settingsTemplates:"toujours écrasés"},replaceExisting:"Remplacer existant",keepExisting:"Garder existant",replaceDescription:"Écrase les doublons avec la sauvegarde",keepDescription:"Ne restaure que les éléments absents",caution:"Attention :",cautionText:"L'écrasement remplacera vos réglages. Les codes d'accès imprimantes sont exclus par sécurité.",itemsRestored:"Éléments restaurés",itemsSkipped:"Éléments ignorés",restored:"Restaurés",skipped:"Ignorés (déjà présents)",filesLabel:"Fichiers (3MF, vignettes, etc.)",newApiKeysGenerated:"Nouvelles clés API générées",newApiKeysWarning:"Copiées maintenant, elles ne seront plus visibles !",processingBackup:"Traitement du fichier...",noDataFound:"Aucune donnée trouvée dans le fichier.",failedToRestore:"Échec restaure. Vérifiez le format."},backupExport:{title:"Exporter Sauvegarde",selectData:"Données à inclure",selectAll:"Tout sélectionner",selectNone:"Ne rien sélectionner",categoryDescriptions:{settings:"Langue, thèmes, préférences",notifications:"ntfy, Pushover, Discord, etc.",templates:"Modèles de messages personnalisés",smartPlugs:"Configuration des prises Tasmota",externalLinks:"Liens externes de la barre latérale",printers:"Infos imprimantes (codes d'accès exclus par défaut)",plateDetection:"Images références des plateaux vides",filaments:"Types et coûts filaments",maintenance:"Plannings de maintenance personnalisés",archives:"Données impressions + fichiers (3MF, vignettes, etc.)",projects:"Projets, BOM, pièces jointes",pendingUploads:"En attente revue virtuelle",apiKeys:"Clés Webhook (nouvelles clés générées à l'import)"},requiresPrinters:"Nécessite sélection des imprimantes",zipFileWarning:"Fichier ZIP créé.",zipFileDescription:"Contient tous les médias. Peut être volumineux.",includeAccessCodes:"Inclure Codes d'accès",includeAccessCodesDescription:"Pour migrer vers une autre machine",includeAccessCodesWarning:"Codes en texte clair. Sécurisez ce fichier !",categoriesSelected:"{{selectedCount}} catégories choisies"},pendingUploads:{placeholders:{notes:"Notes sur l'impression..."},discardUpload:"Rejeter",archiveAllUploads:"Tout archiver",discardAllUploads:"Tout rejeter",archive:"Archiver",timeAgo:{justNow:"À l'instant",minutesAgo:"Il y a {{minutes}}m",hoursAgo:"Il y a {{hours}}h",daysAgo:"Il y a {{days}}j"}},apiBrowser:{placeholders:{requestBody:"Corps JSON...",searchEndpoints:"Chercher endpoints..."}},configureAmsSlot:{title:"Configurer le slot AMS",slotConfigured:"Slot configuré !",configuringSlot:"Configuration du slot :",slotLabel:"{{ams}} – Emplacement {{slot}}",searchPresets:"Chercher presets...",colorPlaceholder:"Nom couleur ou hex (ex: brown, FF8800)",clearCustomColor:"Effacer couleur perso",noCloudPresets:"Profils Cloud absents. Connectez-vous.",noPresetsAvailable:"Aucun preset disponible. Connectez-vous à Bambu Cloud ou importez des profils locaux.",noMatchingPresets:"Aucun profil trouvé.",custom:"Perso",builtin:"Inclus",settingsSentToPrinter:"Réglages envoyés",filamentProfile:"Profil Filament",kProfileLabel:"Profil K (Pressure Advance)",filteringFor:"Filtrage pour : {{material}}",noKProfile:"Pas de profil K (utiliser défaut 0.020)",noMatchingKProfiles:"Aucun profil K trouvé. K=0.020 par défaut sera utilisé.",selectFilamentFirst:"Sélectionnez d'abord un profil filament",kFromCalibration:"K={{value}} de la calibration imprimante",customColorLabel:"Couleur personnalisée (optionnel)",presetColors:"Couleurs {{name}} :",showLessColors:"Moins de couleurs",showMoreColors:"Plus de couleurs",clear:"Effacer",hexLabel:"Hex : #{{hex}}",resetting:"Réinitialisation...",resetSlot:"Réinitialiser le slot",cancel:"Annuler",configuring:"Configuration...",configureSlot:"Configurer le slot"},githubBackup:{title:"Sauvegarde Git",history:"Historique",downloadBackup:"Télécharger",restoreBackup:"Restaurer",noBackupsYet:"Aucune sauvegarde"},emailSettings:{placeholders:{fromName:"Bambuddy"}},tagManagement:{searchTags:"Chercher tags...",renameTag:"Renommer tag",deleteTag:"Supprimer tag"},notificationTemplates:{placeholders:{title:"Titre notification...",body:"Message notification..."}},batchTag:{placeholders:{newTag:"Nouveau tag..."}},photoGallery:{deletePhoto:"Supprimer photo"},filamentHoverCard:{copySpoolUuid:"Copier UUID bobine"},kProfilesView:{hasNote:"A une note",copyProfile:"Copier profil"},layout:{openMenu:"Ouvrir menu",noPermissionSystemInfo:"Pas d'autorisation système"},dashboard:{dragToReorder:"Glisser pour réorganiser",hideWidget:"Masquer widget"},notificationProviderCard:{deleteNotificationProvider:"Supprimer fournisseur"},fileManagerModal:{closeFileManager:"Fermer gestionnaire",sortFiles:"Trier fichiers",goToParentFolder:"Dossier parent",threeView:"Vue 3D"},embeddedCameraViewer:{refreshStream:"Actualiser flux",close:"Fermer",zoomOut:"Zoom -",resetZoom:"Réinitialiser le zoom",zoomIn:"Zoom +",dragToResize:"Glisser pour dimension"},timelapseViewer:{skipBack5s:"-5s",skipForward5s:"+5s"},notificationProviders:{descriptions:{email:"Notifications par email SMTP",telegram:"Via bot Telegram",discord:"Via webhook Discord",ntfy:"Push auto-hébergé (ntfy)",pushover:"Push fiable (Pushover)",callmebot:"WhatsApp gratuit via CallMeBot",webhook:"Requête HTTP POST personnalisée"}},logViewer:{searchPlaceholder:"Message ou nom...",noLogEntries:"Aucune entrée journal"},switchbarPopover:{noSwitchesInSwitchbar:"Aucun interrupteur"},projectPageModal:{placeholders:{title:"Titre",designer:"Designer",license:"Licence",description:"Description...",profileTitle:"Titre du profil",profileDescription:"Description du profil..."}},spoolmanSettings:{},time:{unknown:"-",waiting:"En attente",justNow:"À l'instant",now:"Maintenant",minsAgo:"il y a {{count}}m",inMins:"dans {{count}}m",hoursAgo:"il y a {{count}}h",inHours:"dans {{count}}h",daysAgo:"il y a {{count}}j",inDays:"dans {{count}}j"},spoolbuddy:{nav:{dashboard:"Tableau de bord",ams:"AMS",inventory:"Inventaire",writeTag:"Écrire",settings:"Paramètres"},status:{nfcReady:"NFC prêt",nfcOff:"NFC désactivé",offline:"Hors ligne",online:"En ligne",noPrinters:"Aucune imprimante",deviceOffline:"Appareil hors ligne",waitingConnection:"En attente de connexion...",systemReady:"Système prêt",status:"Statut"},dashboard:{readyToScan:"Prêt à scanner",idleMessage:"Placez une bobine sur la balance pour l'identifier",nfcHint:"Le tag NFC sera lu automatiquement",device:"Appareil",syncWeight:"Sync. poids",weightSynced:"Synchronisé !",unknownTag:"Tag inconnu",newTag:"Nouveau tag détecté",onScale:"sur la balance",linkSpool:"Lier à une bobine",linkTagTitle:"Lier le tag à une bobine",linkTag:"Lier le tag",selectSpool:"Sélectionnez une bobine à lier à ce tag :",noUntagged:"Aucune bobine sans tag trouvée",tagDetected:"Tag détecté",noTag:"Pas de tag",tagId:"Étiquette",grossWeight:"Poids brut",spoolSize:"Taille bobine",close:"Fermer",currentSpool:"Bobine actuelle",plateReady:"Plateau prêt : {{name}}",plateReadyLabel:"Plateaux à libérer",plateClearAction:"Libérer",plateClearedToast:"Plateau marqué comme libéré",plateClearFailed:"Impossible de marquer le plateau comme libéré"},modal:{spoolDetected:"Bobine détectée",assignToAms:"Assigner à l'AMS",syncWeight:"Synchroniser le poids",weightSynced:"Synchronisé !",syncing:"Synchronisation...",newTagDetected:"Nouveau tag détecté",addToInventory:"Ajouter à l'inventaire",assignToAmsTitle:"Assigner à l'AMS",selectSlot:"Sélectionner un emplacement",assign:"Assigner",assigning:"Attribution...",assignSuccess:"Assigné !",assignPendingInsert:"Assigné. Le slot sera configuré lors de l'insertion de la bobine.",assignError:"Échec de l'attribution de la bobine. Veuillez réessayer.",noPrinterSelected:"Sélectionner une imprimante...",noAmsDetected:"Aucun AMS détecté sur cette imprimante",slot:"Emplacement"},weight:{noReading:"Pas de lecture",stable:"Stable",measuring:"Mesure...",tare:"Tarer",calibrate:"Calibrer"},spool:{remaining:"Restant",material:"Matériau",brand:"Marque",color:"Couleur",coreWeight:"Noyau",labelWeight:"Étiquette",scaleWeight:"Balance",netWeight:"Réseau",lastUsed:"Dernière utilisation"},ams:{noData:"Aucun AMS détecté",connectAms:"Connectez un AMS pour voir les slots",noPrinter:"Aucune imprimante sélectionnée",selectPrinter:"Sélectionnez une imprimante dans la barre supérieure",printerDisconnected:"Imprimante déconnectée",humidity:"Humidité",level:"Niveau",active:"Actif",slot:"Emplacement",empty:"Vide"},inventory:{search:"Rechercher des bobines...",empty:"Aucune bobine dans l'inventaire",noResults:"Aucune bobine correspondante",spools:"bobines",addSpool:"Ajouter une bobine"},settings:{tabDevice:"Appareil",tabDisplay:"Affichage",tabScale:"Balance",tabUpdates:"Mises à jour",nfcReader:"Lecteur NFC",type:"Type",connection:"Connexion",notConnected:"N/D",deviceInfo:"Info appareil",hostname:"Hôte",uptime:"Temps de fonctionnement",brightness:"Luminosité",saved:"Enregistré",noBacklight:"Aucun rétroéclairage DSI détecté. Le contrôle de luminosité nécessite un écran DSI.",screenBlank:"Délai d'extinction",screenBlankDesc:"L'écran s'éteint après inactivité. Touchez pour réveiller.",displayNote:"La luminosité est appliquée comme filtre logiciel.",scaleCalibration:"Calibration de la balance",currentWeight:"Poids actuel",tareOffset:"Tare",calFactor:"Facteur",knownWeight:"Poids connu",calStep1:"Retirez tout de la balance et appuyez sur Mettre à zéro.",calStep2:"Placez le poids connu sur la balance.",setZero:"Mettre à zéro",calibrateNow:"Calibrer",calibrated:"Calibré",tareSet:"Commande de tare envoyée. En attente de l'appareil...",tareComplete:"Tare terminée !",tareTimedOut:"Délai de tare dépassé — le daemon SpoolBuddy fonctionne-t-il ?",tareFailed:"Échec de l'envoi de la commande de tare",zeroSet:"Point zéro défini. Placez le poids connu sur la balance.",calibrationDone:"Calibration terminée !",calibrationFailed:"Échec de la calibration",lastCalibrated:"Dernière calibration",stable:"Stable",settling:"Stabilisation...",firmware:"Micrologiciel",scale:"Balance",noDevice:"Aucun appareil SpoolBuddy trouvé",daemonVersion:"Version du daemon",currentVersion:"Actuelle",versionPending:"En attente du daemon...",checking:"Vérification...",checkUpdates:"Vérifier les mises à jour",updateAvailable:"Mise à jour disponible",updateInstructions:"Mise à jour via SSH : exécutez le script d'installation SpoolBuddy.",upToDate:"À jour",includeBeta:"Inclure les versions bêta",systemConfig:"Backend & authentification",backendUrl:"URL du backend Bambuddy",apiToken:"Jeton d'API",apiTokenPlaceholder:"Saisir un jeton d'API",saveConfig:"Enregistrer la configuration",systemQueued:"Configuration mise en file.",systemFieldsRequired:"L'URL du backend est obligatoire.",nfcDiagnostic:"Diagnostic NFC",scaleDiagnostic:"Diagnostic balance",readTagDiagnostic:"Diagnostic lecture de tag",testNfc:"Tester le lecteur",testScale:"Tester la précision",testReadTag:"Lire un tag"},writeTag:{tabExisting:"Bobine existante",tabNew:"Nouvelle bobine",tabReplace:"Remplacer le tag",searchPlaceholder:"Rechercher par matériau, couleur, marque...",noUntaggedSpools:"Aucune bobine sans tag",noTaggedSpools:"Aucune bobine avec tag",selectSpool:"Sélectionnez une bobine, puis placez un NTAG sur le lecteur",placeTag:"Placez un NTAG sur le lecteur",tagReady:"Tag détecté — prêt à écrire",writeTag:"Écrire le tag",replaceTag:"Remplacer le tag",writing:"Écriture du tag...",waiting:"En attente de SpoolBuddy...",writeSuccess:"Tag écrit avec succès !",writeFailed:"Échec de l'écriture",queueFailed:"Impossible de mettre en file la commande d'écriture",tryAgain:"Réessayer",cancel:"Annuler",replaceWarning:"L'ancien tag sera dissocié. Le nouveau tag le remplacera.",deviceOffline:"SpoolBuddy est hors ligne",material:"Matériau",colorName:"Nom de la couleur",color:"Couleur",brand:"Marque",weight:"Poids (g)",createSpool:"Créer la bobine",creating:"Création...",spoolCreated:"Bobine créée ! Prêt à écrire.",createFailed:"Impossible de créer la bobine",incompleteDataWarning:"Tag écrit avec des données Spoolman incomplètes"},quickMenu:{printerPower:"Alimentation imprimante",systemControls:"Système",restartDaemon:"Redémarrer le daemon",restartBrowser:"Redémarrer le navigateur",reboot:"Redémarrer",shutdown:"Éteindre",swipeToClose:"Glisser vers le bas pour fermer",confirmTitle:"Confirmer",confirmShutdown:"Êtes-vous sûr de vouloir éteindre le SpoolBuddy ? Vous aurez besoin d'un accès physique pour le rallumer.",confirmReboot:"Êtes-vous sûr de vouloir redémarrer le SpoolBuddy ?",confirmRestartDaemon:"Redémarrer le daemon SpoolBuddy ? Le NFC et la balance seront temporairement indisponibles.",confirmRestartBrowser:"Redémarrer le navigateur kiosque ? L'écran sera brièvement noir.",confirm:"Confirmer",confirmPlugOn:"Allumer {{name}} ?",confirmPlugOff:"Éteindre {{name}} ?",turnOn:"Allumer",turnOff:"Éteindre"}},diagnostic:{modalTitle:"Diagnostic de connexion — {{name}}",running:"Diagnostic en cours...",runningElapsed:"Diagnostic en cours... ({{elapsed}}s)",waitingForReportHint:"En attente que l'imprimante publie un rapport d'état — cela peut prendre jusqu'à {{max}} secondes.",runFailed:"Le diagnostic n'a pas pu s'exécuter : {{error}}",retry:"Relancer",runButton:"Lancer le diagnostic",sectionTitle:"Diagnostic de connexion",sectionDescription:"Vérifiez pourquoi une imprimante ne se connecte pas ou n'imprime pas — accessibilité des ports, mode développeur LAN, mode réseau Docker et identifiants.",noPrinters:"Aucune imprimante configurée.",overall:{ok:"Aucun problème détecté — la connexion de l'imprimante semble correcte.",warnings:"L'imprimante devrait fonctionner, mais certains points nécessitent votre attention.",problems:"Des problèmes expliquant pourquoi l'imprimante ne se connecte pas ou n'imprime pas ont été détectés."},check:{port_mqtt:{title:"Port de contrôle (MQTT 8883)",pass:"Accessible — l'imprimante accepte les connexions de contrôle.",fail:"Le port 8883 est inaccessible. L'imprimante est éteinte, possède une autre adresse IP, ou un pare-feu la bloque. Vérifiez l'IP de l'imprimante et qu'aucun élément ne bloque le port 8883."},port_ftps:{title:"Port de transfert de fichiers (FTPS 990)",pass:"Accessible — l'envoi de fichiers d'impression fonctionnera.",warn:"Le port 990 est inaccessible. La surveillance peut toujours fonctionner, mais l'envoi d'impressions vers l'imprimante échouera. Assurez-vous que le port 990 n'est pas bloqué."},port_rtsps:{title:"Port caméra (RTSPS 322)",pass:"Accessible — le flux de la caméra fonctionnera.",warn:"Le port 322 est inaccessible. La vue caméra en direct ne fonctionnera pas. Cela n'affecte pas l'impression."},network_mode:{title:"Mode réseau Docker",pass:"Fonctionne en mode réseau host.",warn:`Bambuddy fonctionne en réseau Docker bridge. La découverte d'imprimantes et l'imprimante virtuelle nécessitent le mode réseau host — recréez le conteneur avec "network_mode: host".`,skip:"Ne fonctionne pas dans Docker — non applicable."},subnet:{title:"Sous-réseau",pass:"L'imprimante et Bambuddy sont sur le même sous-réseau.",warn:"L'imprimante ({{printer_ip}}) et Bambuddy ({{host_ip}}) sont sur des sous-réseaux différents. Ils peuvent ne pas se joindre, sauf si un routage entre les sous-réseaux est configuré.",skip:"Le sous-réseau n'a pas pu être déterminé — ignoré."},mqtt_auth:{title:"Identifiants de l'imprimante",pass:"L'imprimante a accepté la connexion.",fail:"L'imprimante est accessible mais a refusé la connexion. Le code d'accès ou le numéro de série est très probablement incorrect. Le code d'accès change chaque fois que le mode développeur est activé/désactivé — recopiez-le depuis l'écran de l'imprimante.",skip:"Non vérifié — l'imprimante n'a pas pu être jointe."},developer_mode:{title:"Mode développeur LAN",pass:"Le mode développeur est activé.",fail:"Le mode développeur est DÉSACTIVÉ sur l'imprimante. Activez-le dans les paramètres LAN de l'imprimante — et confirmez avec OK. Sans lui, les impressions ne démarreront pas.",skip:"Impossible à vérifier — nécessite une connexion active à l'imprimante."},printer_publishing:{title:"L'imprimante publie son état",pass:"L'imprimante publie des mises à jour d'état — l'AMS, les filaments et les profils K seront correctement reflétés dans le slicer.",fail:"Le broker MQTT a accepté la connexion mais l'imprimante n'a publié aucun rapport d'état. Il s'agit presque toujours d'un numéro de série erroné ou mal capitalisé — le topic device/<serial>/report est sensible à la casse. Vérifiez le numéro de série dans les paramètres de l'imprimante par rapport à l'écran de la machine.",skip:"Impossible à vérifier — nécessite une connexion active à l'imprimante."}}},systemHealth:{sectionTitle:"État du système",sectionDescription:"Analyse les journaux récents à la recherche de problèmes connus que vous pouvez généralement résoudre vous-même, avant qu'ils ne deviennent un ticket de support.",rescan:"Relancer l'analyse",clean:"Aucun problème connu trouvé dans les {{times}} dernières entrées de journal.",logUnavailable:"La journalisation dans un fichier est désactivée, les journaux ne peuvent donc pas être analysés. Activez la journalisation dans un fichier pour utiliser cette vérification.",learnMore:"Comment corriger",fixLabel:"Correctif :",occurrences:"Vu {{times}}× — dernière fois à {{lastSeen}}",category:{layer8:"Vous pouvez corriger ceci",environment:"Environnement",bug:"Merci de le signaler"},signature:{"ftp-auth-rejected":{name:"L'imprimante a refusé le code d'accès",cause:"L'imprimante a refusé la connexion de transfert de fichiers. Le code d'accès est incorrect, ou il a changé après l'activation du mode développeur.",fix:"Recopiez le code d'accès depuis l'écran de l'imprimante (paramètres LAN) et mettez-le à jour dans les paramètres de l'imprimante dans Bambuddy."},"ftp-connection-timeout":{name:"Délai de connexion de transfert de fichiers dépassé",cause:"Bambuddy n'a pas pu atteindre le port de transfert de fichiers de l'imprimante (FTPS 990). Le port est bloqué, ou l'imprimante est éteinte ou sur un autre sous-réseau.",fix:"Assurez-vous que rien ne bloque le port 990 entre Bambuddy et l'imprimante, et que les deux sont sur le même réseau."},"ftp-ssl-error":{name:"Échec de la négociation sécurisée du transfert de fichiers",cause:"La négociation TLS avec le serveur de transfert de fichiers de l'imprimante a échoué. C'est souvent dû à un pare-feu ou à un micrologiciel d'imprimante obsolète.",fix:"Mettez à jour le micrologiciel de l'imprimante et vérifiez qu'aucun pare-feu ou proxy n'intercepte la connexion sur le port 990."},"mqtt-connection-flapping":{name:"La connexion à l'imprimante se coupe sans cesse",cause:"La connexion de contrôle (MQTT 8883) se déconnecte et se reconnecte à répétition — généralement à cause d'un réseau faible ou d'un port partiellement bloqué.",fix:"Vérifiez le signal Wi-Fi près de l'imprimante, privilégiez une connexion filaire et assurez-vous que le port 8883 est accessible de façon fiable."},"camera-connection-refused":{name:"Flux de la caméra inaccessible",cause:"La caméra en direct n'a pas pu être atteinte sur le port RTSPS 322. Le port est bloqué, ou la caméra ou la vue en direct par LAN est désactivée sur l'imprimante.",fix:"Activez la caméra et la vue en direct par LAN sur l'imprimante, et assurez-vous que le port 322 n'est pas bloqué. Cela n'affecte pas l'impression."},"database-locked":{name:"Conflits d'écriture dans la base de données",cause:'La base de données SQLite rencontre des erreurs "database is locked" sous charge — fréquent lorsque plusieurs imprimantes sont utilisées en même temps.',fix:"Faites passer Bambuddy à une base de données PostgreSQL externe. Consultez le guide PostgreSQL dans la documentation."}}},vpDiagnostic:{title:"Vérification de configuration — {{name}}",runButton:"Lancer la vérification",running:"Vérification de configuration en cours...",runFailed:"Impossible de lancer la vérification de configuration : {{error}}",retry:"Relancer",overall:{ok:"Toutes les vérifications ont réussi — cette imprimante virtuelle est correctement configurée.",warnings:"L'imprimante virtuelle devrait fonctionner, mais certains points nécessitent votre attention.",problems:"Des problèmes ont été trouvés qui expliquent pourquoi le slicer ne voit pas ou ne peut pas utiliser cette imprimante virtuelle."},check:{enabled:{title:"Imprimante virtuelle activée",fail:"Cette imprimante virtuelle est désactivée. Activez-la pour qu'elle soit détectable."},running:{title:"Services en cours d'exécution",fail:"L'imprimante virtuelle est activée mais ses services ne sont pas en cours d'exécution. Consultez le journal Bambuddy — un conflit d'IP de liaison ou une erreur de permission les arrête généralement."},bind_interface:{title:"Interface réseau de liaison",fail:`L'interface de liaison n'est pas définie ou n'existe plus sur cet hôte. Choisissez une interface actuelle dans la liste "Interface de liaison".`},access_code:{title:"Code d'accès défini",fail:"Aucun code d'accès n'est défini. Le slicer doit recevoir le même code d'accès à 8 caractères que celui que vous définissez ici."},target_printer:{title:"Imprimante cible",fail:"Aucune imprimante cible n'est sélectionnée. Le mode proxy a besoin d'une vraie imprimante vers laquelle transférer.",warn:"L'imprimante cible est hors ligne pour le moment — le transfert reprendra dès qu'elle se reconnectera."},port_ftps:{title:"Service de téléversement de fichiers (port {{port}})",fail:"Rien n'écoute sur le port {{port}} de l'IP de liaison, le slicer ne peut donc pas téléverser de fichiers. La cause habituelle est un conflit de port sur cette interface."},port_mqtt:{title:"Service de contrôle (port {{port}})",fail:"Rien n'écoute sur le port {{port}} de l'IP de liaison, le slicer ne peut donc pas se connecter ni afficher l'état."},port_bind:{title:"Service de détection (port {{port}})",fail:"Rien n'écoute sur le port {{port}} de l'IP de liaison, la poignée de main de détection du slicer échoue donc."},certificate:{title:"Certificat TLS",pass:"Certificat prêt. Assurez-vous que le certificat CA Bambuddy (ci-dessus) est importé dans le magasin de confiance de votre slicer.",fail:"Le certificat TLS de cette imprimante virtuelle est manquant. Vérifiez que le répertoire de données Bambuddy est accessible en écriture."}}},bugReport:{logHealthSummary:"Problèmes connus trouvés dans vos journaux",logHealthIntro:"Les journaux récents correspondent à des problèmes connus. Consultez les correctifs ci-dessous — les résoudre pourrait régler votre problème sans rapport de bogue. Vous pouvez tout de même envoyer un rapport ci-dessous.",title:"Signaler un bug",description:"Description",descriptionPlaceholder:"Qu'est-ce qui n'a pas fonctionné ? Veuillez décrire le problème...",email:"E-mail (optionnel)",emailPlaceholder:"votre@email.fr",emailPrivacy:"Si fourni, votre e-mail sera inclus dans une section repliée de l'issue GitHub pour que le mainteneur puisse vous contacter.",screenshot:"Capture d'écran",uploadOrPaste:"Télécharger, coller ou glisser une image",dataCollectedSummary:"Quelles données sont incluses dans le rapport ?",dataIncluded:"Inclus :",dataIncludedList:"Version de l'app, OS, architecture, version Python, statistiques de base de données (compteurs uniquement), modèles d'imprimantes, nombre de buses, versions firmware, état de connexion, état des intégrations (Spoolman, MQTT, HA), paramètres non sensibles, nombre d'interfaces réseau, détails Docker, versions des dépendances.",dataNeverIncluded:"Jamais inclus :",dataNeverIncludedList:"Noms d'imprimantes, numéros de série, codes d'accès, mots de passe, adresses IP, adresses e-mail, clés API, tokens, URLs de webhook, noms d'hôtes ou noms d'utilisateurs.",submit:"Envoyer",startLogging:"Lancer la journalisation",stepEnableLogging:"Journalisation activée",stepReproduce:"Reproduisez le problème",stepStopLogging:"Arrêter & envoyer",stopAndSubmit:"Arrêter & Envoyer",maxDuration:"Arrêt auto après {{minutes}} min",stoppingLogs:"Collecte des journaux & envoi...",submitting:"Envoi du rapport de bug...",submittingStepConnection:"Vérification de la connectivité des imprimantes",submittingStepVirtualPrinters:"Vérification de la configuration des imprimantes virtuelles",submittingStepLogScan:"Analyse des journaux récents pour les problèmes connus",submittingStepSubmit:"Envoi du rapport vers GitHub",submitSuccess:"Rapport de bug envoyé avec succès !",submitFailed:"Échec de l'envoi du rapport de bug",diagnosticChecking:"Vérification des connexions des imprimantes...",diagnosticHealthy:"Vérification de connexion réussie — aucun problème détecté sur vos imprimantes.",diagnosticSummary:"{{problems}} imprimante(s) sur {{total}} ont des problèmes de connexion",diagnosticIntro:"Une ou plusieurs imprimantes ont un problème de connexion qui pourrait être à l'origine de votre problème. Dépliez une imprimante ci-dessous pour voir la solution — la résoudre pourrait régler le problème sans rapport de bug. Vous pouvez tout de même envoyer un rapport ci-dessous.",thankYou:"Merci !",submitted:"Votre rapport de bug a été soumis.",viewIssue:"Voir l'issue",unexpectedError:"Une erreur inattendue est survenue"},failureDetection:{title:"Détection d'échec par IA",description:"Surveille les impressions via une API ML Obico auto-hébergée et agit automatiquement sur les échecs détectés.",mlUrl:"URL de l'API ML Obico",mlUrlHint:"URL de base de votre conteneur Obico ml_api auto-hébergé (ex. http://192.168.1.10:3333).",test:"Tester",testSuccess:"API ML accessible et fonctionnelle.",testFailed:"Impossible d'atteindre l'API ML.",sensitivity:"Sensibilité",sensitivityLow:"Basse (moins de faux positifs)",sensitivityMedium:"Moyenne (équilibrée)",sensitivityHigh:"Haute (détection précoce, plus de faux positifs)",sensitivityHint:"Ajuste les seuils de confiance qui déclenchent les avertissements et les échecs.",action:"Action sur échec détecté",actionNotify:"Notifier uniquement",actionPause:"Mettre en pause",actionPauseOff:"Pause et couper l'alimentation",pollInterval:"Intervalle de vérification (secondes)",pollIntervalHint:"Fréquence de vérification de chaque imprimante pendant l'impression. Minimum 5s, maximum 120s.",externalUrlMissing:"L'URL externe n'est pas définie.",externalUrlHint:"L'API ML récupère la capture caméra par URL. Définissez l'URL externe dans les paramètres généraux pour que le conteneur API ML puisse atteindre Bambuddy.",perPrinterTitle:"Imprimantes surveillées",perPrinterHint:"Choisissez quelles imprimantes le service de détection surveille.",monitorAll:"Surveiller toutes les imprimantes connectées",statusTitle:"Statut",serviceRunning:"Service en cours d'exécution",thresholds:"Seuils bas / haut",activePrinters:"Impressions actives",noActivePrints:"Aucune impression en cours.",historyTitle:"Détections récentes",noHistory:"Aucune détection pour le moment."},makerworld:{title:"MakerWorld",description:"Collez une URL de modèle MakerWorld pour l'importer et l'imprimer directement depuis Bambuddy — sans passer par l'application Bambu Handy.",pasteUrlHeader:"Importer depuis MakerWorld",pasteUrlPlaceholder:"https://makerworld.com/en/models/… ou collez n'importe quel lien MakerWorld",resolveButton:"Résoudre",signInRequiredTitle:"Connexion Bambu Cloud requise pour télécharger",signInRequiredBody:"Vous pouvez consulter les détails du modèle anonymement, mais MakerWorld nécessite un compte Bambu Cloud pour télécharger les fichiers 3MF.",openCloudSettings:"Ouvrir les paramètres Cloud",untitledModel:"Modèle sans titre",byCreator:"par {{name}}",downloadsCount:"{{count}} téléchargements",licensePrefix:"Licence",alreadyImported:"Déjà dans la bibliothèque",openOnMakerworld:"Ouvrir sur MakerWorld",alreadyInLibrary:"Ce modèle est déjà dans votre bibliothèque — retrouvez-le dans Gestionnaire de fichiers → MakerWorld",importSuccess:"{{filename}} importé — enregistré dans Gestionnaire de fichiers → MakerWorld",platesHeader:"Plateaux ({{count}})",plateDefaultName:"Plateau {{n}}",materialCount:"{{count}} filaments",amsRequired:"AMS requis",slicedFor:"Découpé pour {{printer}}",alsoCompatible:"Également marqué compatible : {{printers}}",importToLibrary:"Enregistrer",sliceIn:"Enregistrer et découper dans {{slicer}}",disclaimer:"L'intégration MakerWorld utilise des points de terminaison API documentés par la communauté. Bambuddy n'est ni affilié ni approuvé par MakerWorld ou Bambu Lab.",lastImportSuccess:"Importé dans votre bibliothèque",lastImportAlreadyInLibrary:"Déjà dans votre bibliothèque",viewInLibrary:"Voir dans le Gestionnaire de fichiers",openInBambuStudio:"Ouvrir dans Bambu Studio",openInOrcaSlicer:"Ouvrir dans OrcaSlicer",importTo:"Importer dans le Gestionnaire de fichiers",recentImportsHeader:"Imports récents",phaseResolving:"Résolution",phaseDownloading:"Téléchargement",folderAuto:"MakerWorld (par défaut)",importAll:"Tout importer",importAllProgress:"Importation de {{current}}/{{total}}",openGallery:"Ouvrir la galerie d'images",galleryPrev:"Image précédente",galleryNext:"Image suivante",deleteImport:"Retirer de la bibliothèque",importDeleting:"Suppression…",importDeleted:"Retiré de la bibliothèque",confirmDelete:"Retirer {{filename}} de la bibliothèque ? Le fichier local est supprimé, mais la plaque peut être ré-importée depuis MakerWorld.",errors:{resolveFailed:"Impossible de résoudre cette URL MakerWorld.",downloadFailed:"Le téléchargement a échoué. Veuillez réessayer.",deleteFailed:"Impossible de retirer le fichier de la bibliothèque."}},gcodeViewer:{back:"Retour",backToArchives:"Retour aux archives d'impression",backToFiles:"Retour au gestionnaire de fichiers"},libraryTrash:{title:"Corbeille",headerButton:"Corbeille",headerTooltip:"Voir les fichiers déplacés dans la corbeille",backToFiles:"Retour au gestionnaire de fichiers",subtitleAdmin:"Les fichiers supprimés restent ici pendant {{days}} jours, puis sont supprimés automatiquement. Cette vue affiche la corbeille de tous les utilisateurs.",subtitleUser:"Les fichiers supprimés restent ici pendant {{days}} jours, puis sont supprimés automatiquement.",loading:"Chargement de la corbeille…",loadError:"Impossible de charger la corbeille.",empty:"La corbeille est vide.",summary:"{{count}} fichiers · {{size}}",emptyTrash:"Vider la corbeille",restore:"Restaurer",purgeNow:"Supprimer maintenant",autoPurgeIn:"Suppression automatique dans {{when}}",days:"jours",retentionLabel:"Supprimer automatiquement après",selectAll:"Tout sélectionner",selectOne:"Sélectionner {{filename}}",selectionCount:"{{count}} sélectionné(s)",bulkRestore:"Restaurer la sélection",bulkPurge:"Supprimer la sélection",col:{filename:"Fichier",folder:"Dossier",size:"Taille",deleted:"Mis à la corbeille",autoPurge:"Suppression auto.",owner:"Propriétaire",actions:"Actions"},confirm:{purgeTitle:"Supprimer définitivement ?",purgeBody:"{{filename}} sera supprimé du disque et ne pourra pas être restauré.",emptyTitle:"Vider la corbeille ?",emptyBody:"Tous les {{count}} fichiers seront supprimés du disque. Cette action est irréversible.",bulkPurgeTitle:"Supprimer définitivement les fichiers sélectionnés ?",bulkPurgeBody:"Les {{count}} fichiers sélectionnés seront supprimés du disque et ne pourront pas être restaurés.",cta:"Supprimer définitivement"},toast:{restored:"Fichier restauré.",restoreFailed:"Impossible de restaurer le fichier.",purged:"Fichier supprimé définitivement.",purgeFailed:"Impossible de supprimer le fichier.",emptied:"{{count}} fichier(s) supprimé(s) de la corbeille.",emptyFailed:"Impossible de vider la corbeille.",retentionSaved:"Suppression automatique réglée sur {{days}} jours.",retentionFailed:"Impossible d'enregistrer le réglage de rétention.",bulkRestored:"{{count}} fichier(s) restauré(s).",bulkPurged:"{{count}} fichier(s) supprimé(s)."}},libraryPurge:{title:"Purger les anciens fichiers",headerButton:"Purger",headerTooltip:"Déplacer en masse les anciens fichiers vers la corbeille",description:"Les fichiers plus anciens que le seuil seront déplacés vers la corbeille. Les dossiers externes sont ignorés. Vous pouvez restaurer depuis la corbeille avant la suppression automatique.",ageLabel:"Déplacer les fichiers plus anciens que",days:"jours",includeNeverPrinted:"Inclure les fichiers jamais imprimés",effectsTitle:"Ce qui se passe lorsque vous cliquez sur Purger",effect1:"Les fichiers correspondants sont déplacés vers la corbeille — pas encore supprimés du disque.",effect2:"Vous pouvez les restaurer depuis la corbeille jusqu'à l'expiration de la fenêtre de rétention.",effect3:"Après la période de rétention, le balayeur de corbeille les supprime définitivement.",effect4:"Les fichiers dans les dossiers externes (liés) sont ignorés — Bambuddy ne supprime jamais d'octets qu'il ne possède pas.",previewLoading:"Vérification du nombre de fichiers concernés…",previewFailed:"Impossible de prévisualiser la purge.",previewSummary:"{{count}} fichiers · {{size}} seraient déplacés vers la corbeille",andMore:"…et {{count}} de plus",warning:"Les fichiers sont supprimés en douceur — vous pouvez les restaurer depuis la corbeille jusqu'à l'expiration de la période de rétention.",confirmCta:"Déplacer {{count}} vers la corbeille",purging:"Déplacement vers la corbeille…",toast:{success:"{{count}} fichier(s) déplacé(s) vers la corbeille.",failed:"Impossible de purger les fichiers."}},libraryAutoPurge:{enableLabel:"Purge automatique des anciens fichiers",enableDescription:"Exécute la purge administrateur une fois par jour. Les fichiers sont d'abord déplacés vers la corbeille — ils ne sont pas supprimés immédiatement.",ageLabel:"Purger automatiquement les fichiers plus anciens que",ageDescription:"Minimum 7 jours, maximum 10 ans. Utilise la même règle d'ancienneté que le bouton Purger manuel.",days:"jours",includeNeverPrinted:"Inclure les fichiers jamais imprimés",saveFailed:"Impossible d'enregistrer les paramètres de purge automatique."},archivePurge:{headerButton:"Purger les anciens",headerTooltip:"Suppression groupée d'anciennes archives",title:"Purger les anciennes archives",description:"Effacer l'ancien historique d'impression. Chaque archive vieillit selon sa dernière impression terminée — réimprimer une archive remet son âge à zéro, donc le travail actif n'est jamais purgé.",ageLabel:"Supprimer les archives non imprimées depuis",days:"jours",effectsTitle:"Ce qui se passe lorsque vous cliquez sur Purger",effect1:"Chaque archive correspondante est masquée des listes et ses fichiers sont retirés du disque (3MF, miniature, timelapse, 3MF source, F3D, photos).",effect2:"La ligne d'archive reste en base pour que les statistiques rapides conservent la contribution en filament, temps, coût et énergie — même comportement que la suppression individuelle par défaut.",effect3:"Cochez « Aussi retirer des statistiques » ci-dessous pour également supprimer la contribution des statistiques rapides (équivalent à l'option de la suppression individuelle). Ce chemin est irréversible.",effect4:"Réimprimer une archive remet son compteur à zéro, les archives actives sont donc protégées.",purgeStatsLabel:"Aussi retirer des statistiques",purgeStatsHint:"Supprime les archives correspondantes des statistiques rapides (filament, temps, coût, énergie). Sans cette option, les statistiques conservent chaque contribution et seuls les fichiers quittent le disque.",previewLoading:"Vérification du nombre d'archives correspondantes…",previewFailed:"Impossible de prévisualiser la purge.",previewSummary:"{{count}} archives · {{size}} seraient retirées",andMore:"…et {{count}} de plus",warning:"Les fichiers sont retirés du disque et ne peuvent pas être restaurés. Téléchargez ou marquez comme favori avant de continuer.",confirmCta:"Retirer {{count}} archive(s)",purging:"Retrait en cours…",toast:{success:"{{count}} archive(s) retirée(s).",failed:"Impossible de purger les archives."}},archiveAutoPurge:{enableLabel:"Purger auto. les anciennes archives",enableDescription:"Une fois par jour, masque des listes les archives non imprimées dans le seuil et retire leurs fichiers du disque. Réimprimer remet le compteur à zéro.",ageLabel:"Suppression auto. des archives non imprimées depuis",ageDescription:"Minimum 7 jours, maximum 10 ans. Basé sur la dernière impression terminée — réimprimer remet l'âge à zéro. Retire 3MF, miniature, timelapse, 3MF source, F3D et photos.",days:"jours",purgeStatsLabel:"Aussi retirer des statistiques",purgeStatsDescription:"Lorsqu'activé, le nettoyage quotidien supprime aussi la contribution de chaque archive purgée des statistiques rapides (filament, temps, coût, énergie). Désactivé par défaut — les statistiques conservent la contribution et seuls les fichiers quittent le disque.",runNow:"Purger les archives maintenant",saveFailed:"Impossible d'enregistrer les paramètres de purge automatique."},cameraTokens:{title:"Jetons API caméra",navTitle:"Jetons API caméra",description:"Jetons longue durée pour intégrer le flux caméra dans Home Assistant, Frigate, kiosques ou tout autre outil nécessitant une URL stable. Chaque jeton est limité au flux caméra et peut être révoqué à tout moment.",loading:"Chargement…",confirmRevoke:{title:"Révoquer ce jeton ?",body:`Tout appareil utilisant "{{name}}" perdra l'accès immédiatement. Action irréversible.`,cancel:"Annuler",confirm:"Révoquer"},create:{title:"Créer un nouveau jeton",nameLabel:"Nom du jeton",namePlaceholder:"par ex. Home Assistant",daysLabel:"Jours avant expiration",submit:"Créer",hint:"Durée de vie maximale 365 jours. La valeur du jeton n'est affichée qu'une seule fois — copiez-la maintenant."},created:{title:"Jeton créé – copiez-le maintenant",warning:"C'est la seule fois où ce jeton sera visible. Après la fermeture de ce dialogue, vous ne pourrez plus jamais le voir.",copy:"Copier",dismiss:"Je l'ai enregistré"},list:{myTitle:"Mes jetons",allTitle:"Tous les utilisateurs (vue admin)",empty:"Aucun jeton pour le moment.",name:"Nom",owner:"Propriétaire",prefix:"Préfixe",created:"Créé",expires:"Expire",lastUsed:"Dernière utilisation",revoke:"Révoquer",expired:"Expiré"},toast:{created:"Jeton créé",createFailed:"Échec de la création du jeton",revoked:"Jeton révoqué",revokeFailed:"Échec de la révocation du jeton",loadFailed:"Échec du chargement des jetons",copied:"Copié dans le presse-papiers",copyFailed:"Échec de la copie – sélectionnez et copiez manuellement"}},forecast:{title:"Prévision des stocks",noSpools:"Aucune bobine active trouvée. Ajoutez des bobines à votre inventaire pour voir les données de prévision.",noUsageData:"Aucune donnée d'utilisation disponible — impossible de projeter la chronologie des stocks.",sku:"SKU",material:"Matériau",stock:"Stock",dailyRate:"Cadence",daysLeft:"Jours restants",emptyBy:"Épuisé le",reorderBy:"Réapprovisionner avant le",actions:"Actions",trend:"Tendance",estimated:"Est.",noData:"Aucune donnée",timeframe:"Période",chartTitle:"Prévision du stock — Top 5 matériaux",dashedLinesROP:"Lignes pointillées = points de réapprovisionnement",stockLevel:"Niveau de stock",reorderPoint:"Point de réapprovisionnement",safetyMargin:"Marge de sécurité",trendLegend:"Tendance (basée sur l'historique, niveau de service 95 %)",estimatedLegend:"Estimée (delta de poids)",noDataLegend:"Aucune donnée",ropLabel:"PR",ssLabel:"SS",safetyStockLegend:"Stock de sécurité",stockArrivalLegend:"Arrivée du stock",stockoutLegend:"Rupture de stock",alertCount_one:"{{count}} alerte",alertCount_other:"{{count}} alertes",order:"Commander",globalLeadTime:"Délai global",globalLeadTimeHint:"Délai global minimum — utilisé dans le calcul du point de réapprovisionnement pour tous les SKUs",save:"Enregistrer",cancel:"Annuler",settingsSaved:"Paramètres enregistrés",failedSaveSettings:"Échec de l'enregistrement des paramètres",globalLeadTimeSaved:"Délai global enregistré",skuLeadTimeOverride:"Délai spécifique au SKU",skuLeadTimeHint:"0 = utiliser le délai global. Définir >0 pour remplacer ce SKU.",safetyMarginLabel:"Marge de sécurité",effectiveLeadTime:"Délai effectif",effectiveLeadTimeHint:"max(global {{global}}j, SKU {{sku}}j)",reorderPointHint:"d̄ × LT + safety margin — commander quand le stock atteint ce niveau",safetyMarginHint:"Stock de sécurité statistique (z=1,65 × σ × √LT) + tampon défini par l'utilisateur",safetyMarginHintDays:"Tampon ajouté par-dessus le stock de sécurité statistique.{{approx}}",safetyMarginHintDaysApprox:" ≈ {{g}}g au taux actuel.",safetyMarginHintG:"Tampon de poids fixe ajouté par-dessus le stock de sécurité statistique.{{approx}}",safetyMarginHintGApprox:" ≈ {{days}}j au taux actuel.",individualSpools:"Bobines individuelles",labelWeight:"Étiquette",spoolCount_one:"{{count}} bobine",spoolCount_other:"{{count}} bobines",stockBreakRisk:"Risque de rupture de stock",stockBreakBefore:"Rupture de stock avant réapprovisionnement",stockBreakDetail:"{{days}}j restants, délai {{lt}}j.",reorderNow:"Réapprovisionner maintenant",reorderTriggerPassed:"La date de déclenchement {{date}} est passée.",shoppingList:"Liste d'achats",shoppingListItems_one:"({{count}} article)",shoppingListItems_other:"({{count}} articles)",shoppingListEmpty:"La liste d'achats est vide. Cliquez sur l'icône panier d'une ligne pour ajouter des articles.",addToCart:"Ajouter à la liste d'achats",alertsSnoozed:"Désactiver les alertes pour ce SKU",alertsEnabled:"Activer les alertes pour ce SKU",addedToCart:"Ajouté à la liste de courses",failedAddItem:"Impossible d'ajouter l'article",listView:"Liste",logisticsView:"Logistique",qty:"Qté",weight:"Poids",leadTime:"Délai",expectedRestock:"Réapprovisionnement prévu",status:"Statut",note:"Note",pending:"En attente",purchased:"Commandé",received:"Reçu",markPurchased:"Marquer comme commandé",markReceived:"Marquer comme reçu — ajoute les bobines au stock",resetToPending:"Remettre en attente",remove:"Supprimer",clearAll:"Tout effacer",downloadCsv:"CSV",addToCartTitle:"Ajouter à la liste de courses",byQuantity:"Par quantité",byDuration:"Par durée",numberOfSpools:"Nombre de bobines",lastHowManyDays:"Combien de jours doit-il durer ?",noUsageQty:"Pas de données d'utilisation — quantité définie à 1.",noteOptional:"Note (optionnel)",notePlaceholder:"ex. pour le projet X, urgent…",addNSpools_one:"Ajouter {{count}} bobine",addNSpools_other:"Ajouter {{count}} bobines",onArrival:"À la livraison",stockBreakIn:"Rupture de stock dans {{days}}j.",stockRunsOutBefore:"Le stock s'épuise avant la fin du délai de {{lt}}j.",atRate:"À {{rate}}g/jour, vous avez besoin de",moreSpools_one:"{{count}} bobine supplémentaire",moreSpools_other:"{{count}} bobines supplémentaires",bridgeGap:"pour combler l'écart.",noReadAccess:"Vous n'avez pas la permission de consulter les prévisions de stock.",noWriteAccess:"Vous n'avez pas la permission de modifier les paramètres de prévision."}},Spe={nav:{printers:"プリンター",archives:"アーカイブ",queue:"印刷キュー",stats:"統計",profiles:"プロファイル",maintenance:"メンテナンス",projects:"プロジェクト",inventory:"フィラメント",files:"ファイル管理",makerworld:"MakerWorld",notifications:"通知",settings:"設定",system:"システム",collapseSidebar:"サイドバーを閉じる",expandSidebar:"サイドバーを開く",update:"アップデート",updateAvailable:"アップデートあり: v{{version}}",updateAvailableBanner:"バージョン {{version}} が利用可能です！",viewUpdate:"アップデートを表示",viewOnGithub:"GitHubで表示",keyboardShortcuts:"キーボードショートカット (?)",switchToLight:"ライトモードに切替",switchToDark:"ダークモードに切替",switchToSystem:"システムモードに切替",smartSwitches:"スマートスイッチ",logout:"ログアウト",installApp:"アプリをインストール",installAppSuccess:"Bambuddyをインストールしました"},common:{save:"保存",saving:"保存中...",cancel:"キャンセル",delete:"削除",edit:"編集",add:"追加",close:"閉じる",confirm:"確認",loading:"読み込み中...",error:"エラー",errorLoading:"データの読み込みエラー",retry:"再試行",success:"成功",warning:"警告",enabled:"有効",disabled:"無効",yes:"はい",no:"いいえ",on:"オン",off:"オフ",all:"すべて",none:"なし",search:"検索",filter:"フィルター",sort:"並べ替え",refresh:"更新",download:"ダウンロード",upload:"アップロード",uploading:"アップロード中...",uploadFailed:"アップロード失敗",actions:"操作",status:"ステータス",name:"名前",description:"説明",date:"日付",time:"時間",hours:"時間",minutes:"分",seconds:"秒",days:"日",enable:"有効化",disable:"無効にする",permissions:"権限",noPrinters:"プリンターが登録されていません",noData:"データがありません",linkNotFound:"リンクが見つかりません",required:"必須",optional:"オプション",dismiss:"閉じる",apply:"適用",reset:"リセット",export:"エクスポート",import:"インポート",clear:"クリア",selectAll:"すべて選択",deselectAll:"すべて選択解除",noChange:"— 変更なし —",unchanged:"変更なし",unassigned:"未割当",unknown:"不明",unknownError:"不明なエラー",today:"今日",tomorrow:"明日",asap:"即時",overdue:"期限超過",now:"今すぐ",collapse:"折りたたむ",expand:"展開",viewArchive:"アーカイブを表示",viewInFileManager:"ファイルマネージャーで表示",addedBy:"{{username}}が追加",prints:"プリント",more:"+{{count}}件",ascending:"昇順",descending:"降順",back:"戻る",copy:"コピー",copied:"コピーしました!",printer:"プリンター",remove:"削除",type:"種類",print:"印刷",rename:"名前変更",move:"移動",create:"作成",duplicate:"複製",left:"左",right:"右"},printers:{addPreflight:{checking:"接続を確認しています...",warning:"一部の接続チェックに失敗しました。このプリンターはオフラインと表示される可能性があります。下のチェックを確認し、可能な範囲で修正するか、そのまま保存してください。",back:"戻る",saveAnyway:"そのまま保存"},title:"プリンター",addPrinter:"プリンターを追加",editPrinter:"プリンターを編集",deletePrinter:"プリンターを削除",printerName:"プリンター名",serialNumber:"シリアル番号",ipAddress:"IPアドレス / ホスト名",accessCode:"アクセスコード",model:"モデル",nozzleCount:"ノズル数",autoArchive:"自動アーカイブ",status:{available:"利用可能",idle:"待機中",printing:"印刷中",paused:"一時停止",offline:"オフライン",problem:"問題",error:"エラー",finished:"完了",unknown:"不明"},temperatures:{nozzle:"ノズル",bed:"ベッド",chamber:"チャンバー"},progress:"{{percent}}% 完了",timeRemaining:"残り {{time}}",deleteConfirm:"「{{name}}」を削除しますか？",maintenanceOk:"メンテナンス正常",maintenanceWarning:"{{count}}件の警告",maintenanceWarning_plural:"{{count}}件の警告",maintenanceDue:"{{count}}件のメンテナンス期限",maintenanceDue_plural:"{{count}}件の期限",sort:{name:"名前",status:"ステータス",model:"モデル",location:"ロケーション",ascending:"昇順で並べ替え",descending:"降順で並べ替え"},cardSize:{small:"小",medium:"中",large:"大",extraLarge:"特大"},hideOffline:"オフラインを非表示",nextAvailable:"次に完了",powerOn:"電源オン",offlinePrintersWithPlugs:"スマートプラグ付きオフラインプリンター",noPrintersConfigured:"プリンターが設定されていません",search:"プリンターを検索...",noSearchResults:"検索またはフィルターに一致するプリンターがありません",filter:{allStatuses:"すべてのステータス",allLocations:"すべての場所"},toolbar:{filters:"フィルター",view:"表示",actions:"操作"},readyToPrint:"印刷可能",external:"外部",extL:"Ext-L",extR:"Ext-R",deleteArchives:"印刷アーカイブを削除",noLabel:"ラベルなし",printPreview:"印刷プレビュー",width:"幅",height:"高さ",noObjectsFound:"オブジェクトが見つかりません",objectsLoadedOnPrintStart:"オブジェクトは印刷開始時に読み込まれます",willBeSkipped:"スキップされます",name:"名前",serialCannotBeChanged:"シリアル番号は変更できません",locationHelp:"プリンターのグループ化とキュージョブのフィルタリングに使用",wifiSignal:{veryWeak:"非常に弱い",weak:"弱い",fair:"注意",good:"良好",excellent:"非常に良い"},maintenanceUpToDate:"すべてのメンテナンスが最新です",chamberLightOn:"チャンバーライトをオンにしました",chamberLightOff:"チャンバーライトをオフにしました",files:"ファイル",browseFiles:"プリンターのファイルを参照",autoOffAfterPrint:"印刷後に自動電源オフ",autoOffExecuted:"自動オフが実行されました - リセットするにはプリンターの電源を入れてください",hmsErrors:"クリックしてHMSエラーを表示",viewHmsErrors:"{{count}}件のHMSエラーを表示",resume:"再開",pause:"一時停止",stop:"停止",camera:"カメラ",skipObject:"オブジェクトスキップ",reconnect:"再接続",forceRefresh:"強制更新",forceRefreshSuccess:"更新をリクエストしました",mqttDebug:"MQTTデバッグ",printerInformation:"プリンター情報",copyToClipboard:"コピー",copied:"コピーしました！",state:"状態",wifiSignalLabel:"WiFi信号",developerMode:"開発者モード",enabled:"有効",disabled:"無効",addedOn:"追加日",sdCard:"SDカード",inserted:"挿入済み",notInserted:"未挿入",totalPrintHours:"印刷時間",activeNozzle:"アクティブ: {{nozzle}}ノズル",nozzleRack:"ノズルラック",nozzleDocked:"ドッキング中",nozzleMounted:"マウント中",nozzleActive:"アクティブ",nozzleIdle:"アイドル",nozzleDiameter:"直径",nozzleType:"タイプ",nozzleStatus:"ステータス",nozzleFilament:"フィラメント",nozzleWear:"摩耗",nozzleMaxTemp:"最高温度",nozzleSerial:"シリアル",nozzleHardenedSteel:"焼入れ鋼",nozzleStainlessSteel:"ステンレス鋼",nozzleTungstenCarbide:"タングステンカーバイド",nozzleFlow:"フロー",nozzleHighFlow:"ハイフロー",nozzleStandardFlow:"スタンダード",firmwareUpdate:"ファームウェアアップデート",firmwareInstructions:"プリンターのタッチスクリーンで",firmwareNav:"に移動",settings:"設定",firmware:"ファームウェア",discoverPrinters:"プリンターを検出",searching:"検索中...",manualEntry:"手動入力",addFromCloud:"クラウドから追加",toast:{printerDeleted:"プリンターを削除しました",missingSpoolAssignment:"{{printer}}で印刷を開始しました。以下のスプール割り当てがありません: {{slots}}",printerAdded:"プリンターを追加しました",printerUpdated:"プリンターを更新しました",failedToDelete:"プリンターの削除に失敗しました",failedToAdd:"プリンターの追加に失敗しました",connectionFailedNotAdded:"プリンターに接続できませんでした。IPアドレス、シリアル番号、アクセスコードを確認し、LAN専用モードが有効になっていることを確認してください。プリンターは追加されていません。",failedToUpdate:"プリンターの更新に失敗しました",commandSent:"コマンドを送信しました",failedToSendCommand:"コマンドの送信に失敗しました",turnedOn:"{{name}} の電源をオンにしました",failedToPowerOn:"{{name}} の電源オンに失敗しました",scriptTriggered:"スクリプトを実行しました",printStopped:"印刷を停止しました",printPaused:"印刷を一時停止しました",printResumed:"印刷を再開しました",referenceDeleted:"リファレンスを削除しました",detectionAreaSaved:"検出エリアを保存しました",failedToRunScript:"スクリプトの実行に失敗しました",failedToStopPrint:"印刷の停止に失敗しました",failedToPausePrint:"印刷の一時停止に失敗しました",failedToResumePrint:"印刷の再開に失敗しました",failedToControlChamberLight:"チャンバーライトの制御に失敗しました",failedToSetSpeed:"印刷速度の設定に失敗しました",failedToUpdateSetting:"設定の更新に失敗しました",failedToSkipObjects:"オブジェクトのスキップに失敗しました",failedToRereadRfid:"RFIDの再読み取りに失敗しました",failedToCheckPlate:"プレートの確認に失敗しました",failedToUpdateLabel:"ラベルの更新に失敗しました",failedToDeleteReference:"リファレンスの削除に失敗しました",failedToSaveDetectionArea:"検出エリアの保存に失敗しました",plateCheckEnabled:"プレートチェックを有効にしました",plateCheckDisabled:"プレートチェックを無効にしました",calibrationSaved:"キャリブレーションを保存しました！",calibrationFailed:"キャリブレーションに失敗しました",rfidRereadInitiated:"RFID再読み取りを開始しました",loadInitiated:"フィラメントをロード中…",unloadInitiated:"フィラメントをアンロード中…",failedToLoad:"フィラメントのロードに失敗",failedToUnload:"フィラメントのアンロードに失敗"},connection:{connected:"接続中",offline:"オフライン"},plateStatus:{markCleared:"プレートをクリア済みにする",cleared:"プレートクリア済み",notCleared:"プレート未クリア",inUse:"プレート使用中"},queue:{inQueue:"キュー内 {{count}} 件",inQueue_plural:"{{count}}件がキュー内"},controls:"コントロール",rfid:{reread:"RFID再読み取り"},ams:{load:"ロード",unload:"アンロード"},bedJog:{title:"ビルドプレートを移動",bed:"ベッド",step:"ステップ (mm)",up:"プレートを上へ",down:"プレートを下へ",disabledWhilePrinting:"印刷中は無効",notHomedTitle:"プリンターがホーミングされていません",notHomedMessage:"前回の印刷以降、プリンターがホーミングされていません。安全な位置決めのためにまずオートホーミングを実行するか（ツールヘッドをパークしてからX・Y・Zをホーミングします）、このまま移動してください — ソフトエンドストップはバイパスされます。",homeZ:"オートホーミング",moveAnyway:"このまま移動",homingStarted:"プリンターをオートホーミング中…"},permission:{noAdd:"プリンターを追加する権限がありません",noEdit:"プリンターを編集する権限がありません",noDelete:"プリンターを削除する権限がありません",noControl:"プリンターを制御する権限がありません",noFiles:"このディレクトリにファイルがありません",noAmsRfid:"AMS RFIDを再読み取りする権限がありません",noSmartPlugControl:"スマートプラグを制御する権限がありません",noCamera:"カメラを表示する権限がありません"},modal:{addTitle:"プリンターを追加",editTitle:"プリンターを編集",myPrinter:"マイプリンター",selectModel:"モデルを選択...",locationGroup:"ロケーション / グループ",locationPlaceholder:"例: 工房、オフィス、地下室",autoArchiveLabel:"完了した印刷を自動アーカイブ",fromPrinterSettings:"プリンターの設定から取得",modelOptional:"モデル（任意）",saveChanges:"変更を保存"},skipObjects:{tooltip:"オブジェクトスキップ",onlyWhilePrinting:"オブジェクトスキップ（印刷中のみ）",requiresMultiple:"オブジェクトスキップ（2個以上必要）",title:"オブジェクトスキップ",matchIdsInfo:"プリンター画面のIDと照合してください",printerShowsIds:"プリンター画面にビルドプレート上のオブジェクトIDが表示されます",skipSelected:"選択をスキップ",skipping:"スキップ中...",noObjectsSelected:"オブジェクトが選択されていません",selectObjectsToSkip:"現在の印刷からスキップするオブジェクトを選択してください",skipped:"スキップ済み",objectsSkipped:"オブジェクトをスキップしました",activeCount:"{{count}}個アクティブ",waitForLayer:"オブジェクトをスキップするにはレイヤー2以降をお待ちください（現在レイヤー{{layer}}）",skip:"スキップ",confirmTitle:"オブジェクトをスキップしますか？",confirmMessage:"「{{name}}」をスキップしますか？この操作は元に戻せません。"},confirm:{deleteTitle:"プリンターを削除",deleteMessage:"「{{name}}」を削除しますか？すべての接続設定が削除されます。",deleteArchivesNote:"このプリンターのすべての印刷履歴が完全に削除されます。",keepArchivesNote:"印刷履歴は保持されますが、このプリンターとの関連は解除されます。",stopTitle:"印刷を停止",stopMessage:"「{{name}}」の現在の印刷を停止しますか？印刷ジョブがキャンセルされます。",stopButton:"印刷を停止",pauseTitle:"印刷を一時停止",pauseMessage:"「{{name}}」の現在の印刷を一時停止しますか？",pauseButton:"印刷を一時停止",resumeTitle:"印刷を再開",resumeMessage:"「{{name}}」の印刷を再開しますか？",resumeButton:"印刷を再開",powerOnTitle:"プリンターの電源をオン",powerOnMessage:"「{{name}}」の電源をオンにしますか？",powerOnButton:"電源オン",powerOffTitle:"プリンターの電源をオフ",powerOffMessage:"「{{name}}」の電源をオフにしますか？",powerOffWarning:"警告: 「{{name}}」は現在印刷中です！電源をオフにしますか？印刷が中断され、プリンターが損傷する可能性があります。",powerOffButton:"電源オフ",haToggleTitle:"「{{name}}」を切り替え",haToggleMessage:"Home Assistant エンティティ {{entity}} を切り替えますか？現在オンの場合、電源がオフになる可能性があります。",haToggleWarning:"警告: 「{{name}}」は現在印刷中です！{{entity}} を切り替えると電源が切れ、印刷が中断される可能性があります。続行しますか？",haToggleButton:"切り替え"},bulk:{select:"選択",selectAll:"すべて選択",selectByLocation:"場所で選択",selected:"{{count}}件選択中",actions:{stop:"停止",pause:"一時停止",resume:"再開",clearPlate:"ベッドをクリア",clearHMS:"通知をクリア"},confirm:{stopTitle:"{{count}}件の印刷を停止",stopMessage:"{{count}}台のプリンターのアクティブな印刷をキャンセルします。この操作は元に戻せません。",stopButton:"すべて停止",pauseTitle:"{{count}}件の印刷を一時停止",pauseMessage:"{{count}}台のプリンターのアクティブな印刷を一時停止します。",pauseButton:"すべて一時停止",clearPlateTitle:"{{count}}台のプリントベッドをクリア",clearPlateMessage:"{{count}}台のプリンターのプリントベッドをクリアし、キュー内のジョブが開始される場合があります。",clearPlateButton:"すべてクリア"},success:"{{count}}台のプリンターで{{action}}が完了",partial:"{{succeeded}}件成功、{{failed}}件失敗",noneApplicable:"選択したプリンターにこのアクションに適した状態のものがありません",selectByState:"ステータスで選択"},discovery:{title:"プリンター",searching:"検索中...",scanning:"スキャン中...",scanProgress:"スキャン中... {{scanned}}/{{total}}",foundPrinters:"{{count}}台のプリンターを検出",noPrintersFound:"プリンターが見つかりません",noPrintersFoundSubnet:"指定されたサブネットにプリンターが見つかりません。",noPrintersFoundNetwork:"ネットワーク上にプリンターが見つかりません。",allConfigured:"検出されたすべてのプリンターは既に設定済みです。",alreadyAdded:"追加済み",select:"選択",manualEntry:"手動入力",addFromCloud:"クラウドから追加",subnetToScan:"スキャンするサブネット",dockerNote:"Dockerを検出しました。プリンターのサブネットをCIDR表記で入力してください。docker-compose.ymlでnetwork_mode: hostが必要です。",scanSubnet:"サブネットをスキャンしてプリンターを検出",discoverNetwork:"ネットワーク上のプリンターを検出",scanningSubnet:"サブネットでBambuプリンターをスキャン中...",scanningNetwork:"ネットワークをスキャン中...",serialRequired:"シリアル番号が必要です",unknown:"不明",failedToStart:"印刷の開始に失敗しました",customSubnetOption:"カスタムサブネット...",customSubnetLabel:"カスタムサブネット (CIDR)",customSubnetNote:"プリンターがこのサーバーと別のネットワークにある場合は、カスタムサブネットを使用してください。FTP (990) と MQTT (8883) のポートが、ルーティング境界を越えて到達可能である必要があります。"},drying:{start:"乾燥開始",stop:"乾燥停止",temperature:"温度",duration:"時間",hours:"時間",timeRemaining:"残り {{time}}",active:"乾燥中",notSupported:"乾燥非対応",powerRequired:"AMS電源アダプターを接続して乾燥を有効にしてください",startingDrying:"乾燥を開始しています...",stoppingDrying:"乾燥を停止しています...",rotateTray:"乾燥中にスプールを回転"},filaments:"フィラメント",openCameraOverlay:"カメラオーバーレイを開く",openCameraWindow:"カメラを新しいウィンドウで開く",firmwareUpdateAvailable:"ファームウェアアップデートあり: {{current}} → {{latest}}",firmwareUpToDate:"ファームウェア {{version}} — 最新",firmwareUpdateButton:"アップデート",plateDetection:{noPermission:"このページにアクセスする権限がありません。",enabledClick:"プレートチェック有効 - クリックして無効化",disabledClick:"プレートチェック無効 - クリックして有効化",manageCalibration:"プレート検出キャリブレーションを管理",calibrationRequired:"キャリブレーションが必要です",calibrationInstructions:"ビルドプレートが<strong>完全に空</strong>であることを確認してから、キャリブレーションをクリックしてください。",calibrationDescription:"キャリブレーションは空のプレートのリファレンス画像を撮影します。以降のチェックではこのリファレンスと比較してオブジェクトを検出します。",calibrationTip:"<strong>ヒント:</strong> 異なるプレート用に最大5つのキャリブレーションを保存できます。チェック時に最適なものが自動的に使用されます。",plateEmpty:"プレートは空のようです",objectsDetected:"オブジェクトを検出しました",confidence:"信頼度",difference:"差分",analysisPreview:"分析プレビュー:",analysisLegend:"緑の枠 = 検出エリア、赤のオーバーレイ = キャリブレーションとの差分",savedReferences:"保存済みリファレンス ({{count}}/{{max}})",deleteReference:"リファレンスを削除",labelPlaceholder:"ラベル...",clickToEdit:"{{label}} - クリックして編集",clickToAddLabel:"クリックしてラベルを追加"},speed:{title:"印刷速度",silent:"サイレント (50%)",standard:"スタンダード (100%)",sport:"スポーツ (124%)",ludicrous:"ルディクラス (166%)"},airduct:{title:"エアダクトモード",cooling:"冷却",heating:"加熱"},noSdCard:"SDなし",door:{open:"開",closed:"閉"},fans:{partCooling:"パーツ冷却ファン",auxiliary:"補助ファン",chamber:"チャンバーファン"},clickToViewHmsErrors:"クリックしてHMSエラーを表示",estimatedCompletion:"完了予定時刻",plateNumber:"プレート {{number}}",slotOptions:"スロットオプション",amsPopup:{friendlyName:"AMS名",friendlyNamePlaceholder:"例: AMS フレンドリー名",serialNumber:"シリアル番号",firmwareVersion:"ファームウェア",save:"保存",clear:"クリア",noEditPermission:"AMS ユニットの名前を変更する権限がありません"},firmwareModal:{title:"ファームウェアアップデート",titleUpToDate:"ファームウェア情報",currentVersion:"現在のバージョン",latestVersion:"最新バージョン",releaseNotes:"リリースノート",checkingPrereqs:"前提条件を確認中...",sdCardReady:"SDカード準備完了。下をクリックしてファームウェアをアップロードしてください。",uploadedSuccess:"ファームウェアをSDカードにアップロードしました！",applyInstructions:"プリンターでアップデートを適用するには:",step1:"プリンターのタッチスクリーンで設定に移動",step2:"ファームウェアに移動",step3:"SDカードからアップデートを選択",step4:"アップデートには10〜20分かかります",done:"完了",starting:"開始中...",uploadFirmware:"ファームウェアをアップロード",uploadFailed:"アップロード開始に失敗しました: {{error}}",uploadedToast:"ファームウェアをアップロードしました！プリンター画面からアップデートを実行してください。",availableVersions:"利用可能なバージョン",usable:"利用可",unavailable:"利用不可",installed:"インストール済み",newerBadge:"新しい",olderBadge:"古い",currentBadge:"現在"},accessCodePlaceholder:"プリンター設定から取得",roi:{title:"プリンター",xStart:"X開始",yStart:"Y開始",width:"幅",height:"高さ",instruction:"ビルドプレートに焦点を合わせるように検出エリアを調整してください。プレビューの緑の枠が現在のエリアを示しています。"},developerModeWarning:"開発者LANモードが有効になっていません: {{names}}。一部の機能が動作しない可能性があります。",howToEnable:"有効化方法",incompatibleFile:"このファイルは{{slicedFor}}用にスライスされていますが、このプリンターは{{printerModel}}です",dropNotPrintable:".gcodeおよび.gcode.3mfファイルのみ印刷できます",dropToPrint:"ドロップして印刷",cannotPrint:"プリンター使用中"},archives:{title:"印刷アーカイブ",searchPlaceholder:"アーカイブを検索...",filterByPrinter:"プリンターで絞り込み",filterByStatus:"ステータスで絞り込み",sortBy:"並べ替え",sortNewest:"新しい順",sortOldest:"古い順",sortName:"名前順",sortDuration:"時間順",sortLargest:"大きい順",sortSmallest:"小さい順",sortSize:"サイズ",noArchives:"アーカイブが見つかりません",noArchivesSearch:"検索条件に一致するアーカイブがありません",originalPrintNotVisible:"元の印刷が表示されていません - フィルターをクリアしてみてください",noArchivesYet:"アーカイブはまだありません",prints:"件",pagination:{showing:"表示中",to:"〜",of:"/",show:"表示",page:"ページ",all:"すべて"},loadingArchives:"アーカイブを読み込み中...",releaseToUpload:"ドロップしてアップロード",showAll:"すべて表示",showFavoritesOnly:"お気に入りのみ表示",gridView:"グリッド表示",listView:"リスト表示",calendarView:"カレンダー表示",logView:"印刷ログ",manageTags:"タグを管理",showFailedPrints:"失敗した印刷を表示",hideFailedPrints:"失敗した印刷を非表示",hideDuplicates:"重複を非表示",viewOriginalPrint:"クリックして元の印刷を表示 (#{{id}})",printTime:"印刷時間",filamentUsed:"フィラメント使用量",cost:"コスト",reprint:"再印刷",preview:"プレビュー",deleteArchive:"アーカイブを削除",deleteConfirm:"このアーカイブを削除しますか？",favorite:"お気に入り",unfavorite:"お気に入りから削除",viewDetails:"詳細を表示",status:{completed:"完了",failed:"失敗",stopped:"中止"},toast:{source3mfAttached:"ソース3MFを添付しました: {{filename}}",failedUploadSource3mf:"ソース3MFのアップロードに失敗しました",source3mfRemoved:"ソース3MFを削除しました",failedRemoveSource3mf:"ソース3MFの削除に失敗しました",f3dAttached:"F3Dを添付しました: {{filename}}",failedUploadF3d:"F3Dのアップロードに失敗しました",f3dRemoved:"F3Dを削除しました",failedRemoveF3d:"F3Dの削除に失敗しました",timelapseAttached:"タイムラプスを添付しました: {{filename}}",timelapseAlreadyAttached:"タイムラプスは既に添付されています",noMatchingTimelapse:"一致するタイムラプスが見つかりません",failedScanTimelapse:"タイムラプスのスキャンに失敗しました",failedAttachTimelapse:"タイムラプスの添付に失敗しました",timelapseRemoved:"タイムラプスを削除しました",failedRemoveTimelapse:"タイムラプスの削除に失敗しました",timelapseUploaded:"タイムラプスをアップロードしました: {{filename}}",failedUploadTimelapse:"タイムラプスのアップロードに失敗しました",archiveDeleted:"アーカイブを削除しました",failedDeleteArchive:"アーカイブの削除に失敗しました",addedToFavorites:"お気に入りに追加しました",removedFromFavorites:"お気に入りから削除しました",projectUpdated:"プロジェクトを更新しました",failedUpdateProject:"プロジェクトの更新に失敗しました",linkCopied:"リンクをクリップボードにコピーしました",failedCopyLink:"リンクのコピーに失敗しました",photoDeleted:"写真を削除しました",failedDeletePhoto:"写真の削除に失敗しました",failedDeleteArchives:"アーカイブの削除に失敗しました",failedUpdateFavorites:"お気に入りの更新に失敗しました",exportDownloaded:"エクスポートをダウンロードしました",exportFailed:"エクスポートに失敗しました"},menu:{print:"印刷",schedule:"スケジュール",openInBambuStudio:"スライサーで開く",slice:"スライス",externalLink:"外部リンク",viewOnMakerWorld:"MakerWorldで表示",preview3d:"3Dプレビュー",viewTimelapse:"タイムラプスを表示",scanForTimelapse:"タイムラプスをスキャン",uploadTimelapse:"タイムラプスをアップロード",removeTimelapse:"タイムラプスを削除",downloadSource3mf:"ソース3MFをダウンロード",uploadSource3mf:"ソース3MFをアップロード",replaceSource3mf:"ソース3MFを置換",removeSource3mf:"ソース3MFを削除",uploadF3d:"F3Dをアップロード",replaceF3d:"F3Dを置換",downloadF3d:"Fusion 360デザインファイルをダウンロード",removeF3d:"F3Dを削除",download:"ダウンロード",copyDownloadLink:"ダウンロードリンクをコピー",qrCode:"QRコード",viewPhotos:"写真を表示",viewPhotosCount:"写真を表示 ({{count}})",projectPage:"プロジェクトページ",addToFavorites:"お気に入りに追加",removeFromFavorites:"お気に入りから削除",edit:"編集",printLog:"印刷ログ",goToProject:"プロジェクトへ: {{name}}",addToProject:"プロジェクトに追加",removeFromProject:"プロジェクトから削除",loading:"アーカイブを読み込み中...",noProjectsAvailable:"利用可能なプロジェクトがありません",searchProjects:"プロジェクトを検索…",select:"選択",deselect:"選択解除",delete:"削除"},permission:{noReprint:"このアーカイブを再印刷する権限がありません",noAddToQueue:"キューに追加する権限がありません",noUpdateArchives:"アーカイブを更新する権限がありません",noUploadFiles:"ファイルをアップロードする権限がありません",noDownload:"アーカイブをダウンロードする権限がありません",noCopyLink:"ダウンロードリンクをコピーする権限がありません",noDelete:"このアーカイブを削除する権限がありません",noCreate:"アーカイブを作成する権限がありません"},platePicker:{title:"プレビューするプレートを選択",hint:"このアーカイブには複数のプレートがあります。GCodeビューアで開くプレートを選択してください。",plateLabel:"プレート {{index}}",objectCount:"{{count}} オブジェクト",objectCount_plural:"{{count}} オブジェクト",noGcode:"このアーカイブにはプレビュー可能なスライス済みGコードがありません。まずBambu Studioで開いてスライスしてください。"},card:{previousPlate:"前のプレート",nextPlate:"次のプレート",plateNumber:"プレート {{index}}",moreOptions:"その他のオプション",addToFavorites:"お気に入りに追加",removeFromFavorites:"お気に入りから削除",cancelled:"キャンセル",failed:"失敗",duplicate:"重複",duplicateTitle:"このモデルは以前印刷されています",openSource3mf:"ソース3MFをBambu Studioで開く（右クリックでオプション表示）",downloadF3d:"Fusion 360デザインファイルをダウンロード",viewTimelapse:"タイムラプスを表示",viewPhoto:"写真を表示",viewPhotos:"{{count}}枚の写真を表示",openFolder:"フォルダーを開く: {{name}}",slicedFile:"スライス済みファイル - 印刷可能",sourceFile:"ソースファイルのみ - AMSマッピング不可",gcode:"GCODE",source:"ソース",project:"プロジェクト: {{name}}",runsBadge:"{{count}} 回印刷",runsBadgeTitle:"合計 {{count}} 回 — 成功 {{successful}} 回、失敗 {{failed}} 回。クリックして印刷ログを開きます。",estimated:"推定: {{time}}",actual:"実際: {{time}}",accuracy:"精度: {{percent}}%",filament:"{{weight}} g",layer:"{{count}} レイヤー",layers:"{{count}} レイヤー",object:"{{count}}オブジェクト",objects:"{{count}}オブジェクト",slicedFor:"{{model}}用にスライス",uploadedBy:"アップロード者",noPermissionReprint:"再印刷する権限がありません",noFileForReprint:"3MFファイルがありません — 印刷記録時にプリンターからファイルをダウンロードできませんでした",noPermissionEdit:"プロファイルを編集する権限がありません",noPermissionDelete:"アーカイブを削除する権限がありません",reprint:"再印刷",schedulePrint:"印刷をスケジュール",schedule:"スケジュール",openInBambuStudio:"スライサーで開く",openInBambuStudioToSlice:"スライサーでスライス",slice:"スライス",externalLink:"外部リンク",makerWorld:"MakerWorld – {{designer}}",viewProject:"プロジェクトを表示",noExternalLink:"外部リンクなし",preview3d:"3Dプレビュー",download:"ダウンロード",edit:"編集",delete:"削除"},runLog:{title:"印刷ログ",modalTitle:"印刷ログ — {{name}}",modalTitleFallback:"このアーカイブ",empty:"このアーカイブの印刷イベントはまだ記録されていません。",col:{date:"日付",status:"ステータス",duration:"時間",filament:"フィラメント",cost:"コスト"},status:{completed:"完了",failed:"失敗",cancelled:"キャンセル",stopped:"停止",skipped:"スキップ",printing:"印刷中"}},modal:{deleteArchive:"アーカイブを削除",deleteConfirm:'"{{name}}" を削除しますか？この操作は取り消せません。',deleteButton:"削除",deletePurgeStats:"このプリントをQuick Statsからも削除（フィラメント、時間、コスト、電力）",removeSource3mf:"ソース3MFを削除",removeSource3mfConfirm:'"{{name}}"からソース3MFファイルを削除してもよろしいですか？元のスライサープロジェクトファイルが削除されます。',removeButton:"削除",removeF3d:"F3Dを削除",removeF3dConfirm:'"{{name}}"からFusion 360デザインファイルを削除してもよろしいですか？',removeTimelapse:"タイムラプスを削除",removeTimelapseConfirm:'"{{name}}"からタイムラプス動画を削除してもよろしいですか？',timelapse:"{{name}} - タイムラプス",selectTimelapse:"タイムラプスを選択",selectTimelapseDesc:"自動一致が見つかりませんでした。この印刷のタイムラプスを選択してください:",deleteArchives:"印刷アーカイブを削除",deleteArchivesConfirm:"{{count}}件のアーカイブを削除しますか？この操作は元に戻せません。",deleteCount:"{{count}}件を削除"},page:{title:"印刷アーカイブ",printsCount:"{{filtered}} / {{total}} 件のプリント",dropFilesHere:".3mfファイルをここにドロップ",releaseToUpload:"ドロップしてアップロード",only3mfSupported:".3mfファイルのみ対応しています",close:"閉じる",selected:"{{count}}件選択中",selectAll:"すべて選択",tags:"タグ",project:"プロジェクト",favorite:"お気に入り",delete:"削除",toggledFavorites:"{{count}}件のアーカイブのお気に入りを切替えました",failedUpdateFavorites:"お気に入りの更新に失敗しました",archivesDeleted:"{{count}}件のアーカイブを削除しました",failedDeleteArchives:"アーカイブの削除に失敗しました",photoDeleted:"写真を削除しました",failedDeletePhoto:"写真の削除に失敗しました"},list:{name:"名前",printer:"プリンター",date:"日付",size:"サイズ",actions:"操作",hasTimelapse:"タイムラプスあり"},log:{date:"日時",printName:"印刷名",printer:"プリンター",user:"ユーザー",status:"ステータス",duration:"所要時間",filament:"フィラメント",allPrinters:"全プリンター",allUsers:"全ユーザー",allStatuses:"全ステータス",cancelled:"キャンセル",skipped:"スキップ",dateFrom:"開始日",dateTo:"終了日",noEntries:"印刷ログが見つかりません",showing:"{{total}}件中{{count}}件を表示",rowsPerPage:"行数",page:"ページ",prev:"前へ",next:"次へ",clearLog:"ログをクリア",clearLogTitle:"印刷ログをクリア",clearLogConfirm:"すべての印刷ログエントリが完全に削除されます。アーカイブとキューアイテムには影響しません。この操作は元に戻せません。よろしいですか？",clearLogButton:"すべてクリア",cleared:"{{count}}件のログエントリを削除しました",clearFailed:"印刷ログの削除に失敗しました"}},queue:{filamentShort:{rowBadge:"割り当てられたスプールのフィラメントが不足しています",rowTooltip:"スケジューラーがこのアイテムをフラグしました。再生ボタンをクリックしてスロットごとの不足量を確認し、それでも印刷するか判断してください。",confirmTitle:"フィラメント不足",confirmIntro:"割り当てられたスプールでは少なくとも 1 つのスロットを賄えません。それでも印刷しますか？",lineItem:"スロット {{slot}}：必要 {{required}} g、残り {{remaining}} g",unknown:"不明",printAnyway:"それでも印刷"},title:"印刷キュー",subtitle:"印刷ジョブのスケジュールと管理",addToQueue:"キューに追加",print:"印刷",reprint:"再印刷",schedulePrint:"印刷をスケジュール",editQueueItem:"キューアイテムを編集",printToPrinters:"{{count}}台のプリンターで印刷",queueToPrinters:"{{count}}台のプリンターでキュー追加",queueSelectedPlates:"{{count}}プレートをキューに追加",selectAllPlates:"全{{count}}プレートを選択",deselectAll:"全て解除",printQueued:"キューに追加しました",itemsQueued:"{{count}}件をキューに追加しました",sending:"送信中...",sendingProgress:"送信中 {{current}}/{{total}}...",adding:"追加中...",addingProgress:"追加中 {{current}}/{{total}}...",savingProgress:"保存中 {{current}}/{{total}}...",clearQueue:"キューをクリア",clearHistory:"履歴をクリア",emptyQueue:"キューは空です",position:"順番",scheduledTime:"予定時刻",moveUp:"上に移動",moveDown:"下に移動",startNow:"今すぐ開始",printingInProgress:"印刷中...",viewArchive:"アーカイブを表示",viewInFileManager:"ファイルマネージャーで表示",itemCount:"{{count}}件",itemCount_plural:"{{count}}件のアイテム",dragToReorder:"ドラッグして並べ替え（ASAPのみ）",reorderHint:"順番はASAPアイテムのみに影響します。スケジュール済みアイテムは設定時刻に実行されます。",sjf:{label:"SJF",tooltip:"短いジョブ優先 — スケジューラーが短い印刷を優先します"},addedBy:"{{name}} が追加",nextInQueue:"次のキュー",clearPlateSuccess:"プレートをクリアしました — 次の印刷の準備完了",plateNumber:"プレート {{index}}",quantity:"数量",quantityHint:"{{count}}件のキューアイテムを作成",activeBatches:"アクティブなバッチ",batchProgress:"{{total}}件中{{completed}}件完了",cancelBatch:"残りをキャンセル",batchCancelled:"残りのバッチアイテムをキャンセルしました",cancelBatchConfirmTitle:"バッチをキャンセル",cancelBatchConfirmMessage:"このバッチの残りの保留中アイテムをすべてキャンセルしますか？",batch:"バッチ",sections:{currentlyPrinting:"印刷中",queued:"キュー中",history:"履歴"},status:{pending:"待機中",waiting:"待機中",printing:"印刷中",paused:"一時停止",completed:"完了",failed:"失敗",skipped:"スキップ",cancelled:"キャンセル済み"},summary:{printing:"印刷中",queued:"キュー中",totalTime:"キュー合計時間",totalWeight:"キュー合計重量",history:"履歴"},filter:{allPrinters:"すべてのプリンター",unassigned:"未割当",allStatus:"すべてのステータス",allLocations:"すべてのロケーション",any:"すべて"},sort:{byPosition:"順番で並べ替え",byName:"名前で並べ替え",byPrinter:"プリンターで並べ替え",bySchedule:"スケジュールで並べ替え",byDate:"日付で並べ替え",ascendingOldest:"昇順（古い順）",descendingNewest:"降順（新しい順）"},badges:{staged:"ステージ済み",requiresPrevious:"前の成功が必要",autoPowerOff:"自動電源オフ",gcodeInjection:"G-code"},empty:{title:"スケジュールされた印刷はありません",description:"アーカイブページのコンテキストメニューから「スケジュール」オプションを使用するか、ファイルをドラッグ＆ドロップして始めましょう。"},time:{asap:"即時",overdue:"期限超過",now:"今すぐ",lessThanMinute:"1分以内",inMinutes:"{{count}}分後",inHours:"{{count}}時間後"},actions:{stopPrint:"印刷を停止",startPrint:"印刷を開始",requeue:"再キュー"},bulkEdit:{title:"{{count}}件のアイテムを編集",title_plural:"{{count}}件のアイテムを編集",description:"変更した設定のみが選択されたアイテムに適用されます。",printer:"プリンター",noChange:"— 変更なし —",queueOptions:"キューオプション",staged:"ステージ済み",autoPowerOff:"印刷後に自動電源オフ",requirePrevious:"前の成功を必要とする",printOptions:"印刷オプション",bedLevelling:"ベッドレベリング",flowCalibration:"フローキャリブレーション",vibrationCalibration:"振動キャリブレーション",layerInspection:"第一層検査",timelapse:"タイムラプス",useAms:"AMS使用",applyChanges:"変更を適用",selectAll:"すべて選択",deselectAll:"すべて選択解除",selected:"{{count}}件選択中",editSelected:"選択を編集",cancelSelected:"選択をキャンセル"},confirm:{cancelTitle:"スケジュール済み印刷をキャンセル",cancelMessage:"「{{name}}」をキャンセルしますか？",stopTitle:"印刷を停止",stopMessage:"現在の印刷「{{name}}」を停止しますか？プリンター上の印刷ジョブがキャンセルされます。",removeTitle:"履歴から削除",removeMessage:"「{{name}}」をキュー履歴から削除しますか？",clearHistoryTitle:"履歴をクリア",clearHistoryMessage:"{{count}}件の履歴をすべて削除しますか？",cancelButton:"印刷をキャンセル",stopButton:"印刷を停止",thisPrint:"この印刷",thisItem:"このアイテム"},toast:{cancelled:"キャンセル済み",cancelFailed:"アイテムのキャンセルに失敗しました",removed:"キューアイテムを削除しました",removeFailed:"プロジェクトからのアーカイブ削除に失敗しました",stopped:"印刷を停止しました",stopFailed:"印刷の停止に失敗しました",released:"印刷をキューにリリースしました",startFailed:"印刷の開始に失敗しました",reorderFailed:"キューの並べ替えに失敗しました",historyCleared:"{{count}}件の履歴をクリアしました",clearHistoryFailed:"履歴のクリアに失敗しました",updateFailed:"アイテムの更新に失敗しました",bulkCancelled:"{{count}}件のアイテムをキャンセルしました",bulkCancelFailed:"アイテムのキャンセルに失敗しました"},timeline:{listView:"リスト",timelineView:"タイムライン",unassigned:"未割当",noData:"この日の予定された印刷はありません",allDoneBy:"すべての印刷は {{time}} までに完了予定",staged:"ステージング",filterAll:"すべて表示",filterPrinting:"印刷中",filterQueued:"待機中",time:{anyMoment:"まもなく",minutesLeft:"残り{{minutes}}分",hoursLeft:"残り{{hours}}時間",hoursMinutesLeft:"残り{{hours}}時間{{minutes}}分"},day:{previous:"前日",next:"翌日",today:"今日"}},permissions:{noStopPrint:"印刷を停止する権限がありません",noStartPrint:"印刷を開始する権限がありません",noEdit:"このキューアイテムを編集する権限がありません",noCancel:"このキューアイテムをキャンセルする権限がありません",noRequeue:"アイテムを再キューする権限がありません",noRemove:"このキューアイテムを削除する権限がありません",noClearHistory:"すべての履歴をクリアする権限がありません",noEditItems:"キューアイテムを編集する権限がありません",noCancelItems:"キューアイテムをキャンセルする権限がありません"}},backgroundDispatch:{unknownFile:"不明なファイル",unknownPrinter:"不明なプリンター",startingPrints:"印刷開始中",progressSummary:"{{complete}}/{{total}} 完了 • 配信済み: {{dispatched}} • 処理中: {{processing}}",expandDetails:"配信詳細を展開",collapseDetails:"配信詳細を折りたたむ",dismissToast:"配信トーストを閉じる",cancelDispatchJob:"配信ジョブをキャンセル",cancel:"キャンセル",cancelling:"キャンセル中…",awaitingPrinter:"プリンターを待機中…",status:{dispatched:"配信済み",processing:"処理中",completed:"完了",failed:"失敗",cancelled:"キャンセル済み"},toast:{cancellingUpload:"アップロードをキャンセル中...",cancelled:"配信をキャンセルしました",cancelFailed:"配信のキャンセルに失敗しました",completeWithFailures:"バックグラウンド配信完了: {{completed}} 件成功、{{failed}} 件失敗",completeSuccess:"バックグラウンド配信完了: {{completed}} 件成功",printStartedRemaining:"{{completed}} 件の印刷を開始、残り {{remaining}} 件送信中..."}},stats:{title:"統計",subtitle:"ウィジェットをドラッグして並べ替え。目のアイコンをクリックして非表示。",overview:"概要",totalPrints:"総印刷数",successRate:"成功率",totalPrintTime:"総印刷時間",printTime:"印刷時間",totalFilament:"総フィラメント使用量",filamentUsed:"フィラメント使用量",filamentCost:"フィラメントコスト",totalCost:"総コスト",energyUsed:"エネルギー使用量",energyCost:"エネルギーコスト",energyWarmingUpTooltip:"エネルギー追跡は毎時スナップショットを収集中です。選択範囲の前に少なくとも1つのスナップショットが存在すると、期間合計が正確になります。初期値は過小になる場合があります。",averagePrintTime:"平均印刷時間",printsPerDay:"1日あたりの印刷数",byPrinter:"プリンター別",printsByPrinter:"プリンター別印刷数",byMaterial:"素材別",byMonth:"月別",last7Days:"過去7日間",last30Days:"過去30日間",last90Days:"過去90日間",allTime:"全期間",quickStats:"クイック統計",printActivity:"印刷アクティビティ",filamentTypes:"フィラメントタイプ",filamentTrends:"フィラメントトレンド",failureAnalysis:"失敗分析",timeAccuracy:"時間精度",successful:"成功",failed:"失敗",cancelled:"キャンセル",perfectEstimate:"100% = 完全な推定",noTimeAccuracyData:"時間精度データがありません",noFilamentData:"フィラメントデータがありません",noPrinterData:"プリンターデータがありません",noPrintData:"印刷データがありません",noPrintDataLast30Days:"過去30日間の印刷データがありません",failureReasons:"失敗理由",topFailureReasons:"主な失敗理由",failedPrintsCount:"{{failed}} / {{total}} 件の印刷が失敗",lastWeekRate:"先週: {{rate}}%",resetLayout:"レイアウトをリセット",recalculateCosts:"コストを再計算",recalculateCostsHint:"現在のフィラメント価格ですべてのアーカイブコストを再計算",exportStats:"統計をエクスポート",exportAsCsv:"CSVでエクスポート",exportAsExcel:"Excelでエクスポート",hiddenCount:"{{count}}件非表示",exportDownloaded:"エクスポートをダウンロードしました",exportFailed:"エクスポートに失敗しました",layoutReset:"レイアウトをリセットしました",recalculatedCosts:"{{count}}件のアーカイブのコストを再計算しました",recalculateFailed:"コストの再計算に失敗しました",loadingStats:"統計を読み込み中...",noPermissionResetLayout:"レイアウトをリセットする権限がありません",noPermissionRecalculate:"コストを再計算する権限がありません",noPrintDataInRange:"選択した期間にデータがありません",periodFilament:"フィラメント使用量",periodCost:"コスト",avgPerPrint:"1印刷あたりの平均",usageOverTime:"時間推移",filamentByWeight:"重量",printDuration:"印刷時間分布",printerUtilization:"プリンター稼働率",filamentSuccess:"素材別成功率",printHabits:"印刷習慣",printTimeOfDay:"時間帯別プリント",colorDistribution:"カラー分布",noColorData:"カラーデータがありません",records:"記録",longestPrint:"最長プリント",heaviestPrint:"最重プリント",mostExpensivePrint:"最高額",busiestDay:"最多プリント日",successStreak:"連続成功",streakPrint:"連続プリント",streakPrints:"{{count}}連続プリント",printerStats:"プリンター統計",hours:"時間",avgPrints:"平均印刷数",noArchiveData:"印刷データがありません",filamentByTime:"推移",avgWeight:"平均重量",avgTime:"平均時間",filamentByPrints:"印刷数",timeframe:{today:"今日","this-week":"今週","this-month":"今月","last-7":"過去7日間","last-30":"過去30日間","last-90":"過去90日間","this-year":"今年","all-time":"全期間",custom:"カスタム",from:"開始",to:"終了"},allUsers:"全ユーザー",noUser:"ユーザーなし（システム）",filterByUser:"ユーザーでフィルター"},maintenance:{title:"メンテナンス",overview:"概要",allOk:"すべてのメンテナンスは最新です",dueCount:"{{count}}件の期限到来",dueCount_plural:"{{count}}件の期限到来",warningCount:"{{count}}件の警告",warningCount_plural:"{{count}}件の警告",totalPrintTime:"総印刷時間",nextMaintenance:"次回メンテナンス",nothingDue:"予定なし",tasks:"タスク",lastPerformed:"前回実施日",interval:"間隔",hoursRemaining:"残り{{hours}}時間",hoursOverdue:"{{hours}}時間超過",markDone:"完了にする",performMaintenance:"メンテナンスを実施",history:"履歴",noHistory:"メンテナンス履歴がありません",editPrintHours:"印刷時間を編集",currentHours:"現在の時間",statusTab:"ステータス",settingsTab:"設定",overdueCount:"{{count}}件超過",dueSoonCount:"{{count}}件まもなく期限",dueSoon:"まもなく期限",allGood:"問題なし",overdueBy:"{{duration}}超過",dueIn:"あと{{duration}}",timeLeft:"残り{{duration}}",day:"1日",days:"{{count}} 日",week:"1週間",weeks:"{{count}}週間",month:"1ヶ月",months:"{{count}}ヶ月",year:"1年",maintenanceTypes:"メンテナンスタイプ",maintenanceTypesDescription:"システムタイプとカスタムメンテナンスタスク",addCustomType:"カスタムタイプを追加",restoreDefaults:"デフォルトタスクを復元",intervalType:"インターバルタイプ",intervalValue:"間隔 ({{type}})",icon:"アイコン",documentationLink:"ドキュメントリンク（任意）",assignToPrinters:"プリンターに割り当て",selectAtLeastOnePrinter:"プリンターを1台以上選択してください",addType:"タイプを追加",custom:"カスタム",printHours:"印刷時間",calendarDays:"カレンダー日数",exampleName:"例: HEPAフィルター交換",viewDocumentation:"ドキュメントを表示",timeBasedInterval:"時間ベースのインターバル",intervalOverrides:"インターバルのオーバーライド",intervalOverridesDescription:"特定のプリンターの間隔をカスタマイズ",assignedToPrinters:"割り当て済みプリンター：",noPrintersAssigned:"プリンター未割り当て",addPrinterShort:"追加:",printersAssignedClick:"{{count}}台のプリンターを割り当て済み - クリックして管理",removeFromPrinter:"このプリンターから削除",types:{lubricateCarbonRods:"カーボンロッドの潤滑",lubricateRails:"リニアレールの潤滑",cleanNozzle:"ノズル/ホットエンドの清掃",checkBelts:"ベルト張力の確認",cleanBuildPlate:"ビルドプレートの清掃",checkExtruder:"エクストルーダーギアの確認",checkCooling:"冷却ファンの確認",generalInspection:"総合点検",cleanCarbonRods:"カーボンロッドの清掃",lubricateSteelRods:"スチールロッドの潤滑",cleanSteelRods:"スチールロッドの清掃",cleanLinearRails:"リニアレールの清掃",checkPtfeTube:"PTFEチューブの確認",replaceHepaFilter:"HEPAフィルター交換",replaceCarbonFilter:"カーボンフィルター交換",lubricateLeftNozzleRail:"左ノズルレールの潤滑"},maintenanceComplete:"メンテナンスを完了としてマークしました",typeUpdated:"メンテナンスタイプを更新しました",typeDeleted:"メンテナンスタイプを削除しました",defaultsRestored:"デフォルトタスクを{{count}}件復元しました",printHoursUpdated:"印刷時間を更新しました",printerAssigned:"プリンターを割り当てました",printerRemoved:"プリンターを削除しました",deleteTypeConfirm:"「{{name}}」を削除しますか？",deleteSystemTypeTitle:"デフォルトのメンテナンスタスクを削除しますか？",deleteSystemTypeMessage:"デフォルトのメンテナンスタスク「{{name}}」を削除してもよろしいですか？",noPermissionUpdate:"メンテナンス記録を更新する権限がありません",noPermissionPerform:"メンテナンスを実行する権限がありません",noPermissionEditTypes:"メンテナンスタイプを編集する権限がありません",noPermissionDeleteTypes:"メンテナンスタイプを削除する権限がありません",noPermissionEditHours:"メンテナンス時間を編集する権限がありません",noPermissionRemovePrinter:"プリンターの割り当てを解除する権限がありません",noPermissionAssignPrinter:"プリンターを割り当てる権限がありません",noPermissionEditIntervals:"メンテナンス間隔を編集する権限がありません",configureSettings:"メンテナンスタイプと間隔を設定"},settings:{title:"設定",general:"一般",tabs:{general:"一般",smartPlugs:"スマートプラグ",notifications:"通知",queue:"ワークフロー",filament:"フィラメント",network:"ネットワーク",apiKeys:"APIキー",virtualPrinter:"仮想プリンター",spoolbuddy:"SpoolBuddy",failureDetection:"失敗検出",users:"認証",backup:"バックアップ",emailAuth:"メール認証",ldap:"LDAP",twoFa:"二段階認証",oidc:"SSO / OIDC",security:"セキュリティ"},spoolbuddy:{infoTitle:"SpoolBuddy デバイス",infoBody:"SpoolBuddy キオスクはハートビートにより自動的に登録されます。使用されなくなった場合や、デーモンのクラッシュにより古い重複が残った場合は、ここでデバイスの登録を解除してください。",duplicatesTitle:"{{count}} 台のデバイスが登録されています",duplicatesBody:"キオスク UI は最初に登録されたデバイスのみを使用します。クラッシュによる古い重複がある場合は登録解除してください。オンラインのデバイスは次回のハートビートで自動的に再登録されます。",empty:"SpoolBuddy デバイスはまだ登録されていません。",online:"オンライン",offline:"オフライン",unregister:"登録解除",unregisterSuccess:"デバイスの登録を解除しました",unregisterError:"デバイスの登録解除に失敗しました",confirmTitle:"SpoolBuddy デバイスの登録を解除しますか？",confirmBody:"「{{hostname}}」（{{deviceId}}）をデータベースから削除します。デバイスがオンラインの場合、次回のハートビートで自動的に再登録されます。",ipAddress:"IPアドレス",firmware:"ファームウェア",lastSeen:"最終接続",daemonUptime:"デーモン稼働時間",systemUptime:"システム稼働時間",never:"なし",nfc:"NFC",scale:"計量器",cpuTemp:"CPU 温度",cpuLoad:"CPU 負荷",memory:"メモリ",disk:"ディスク",update:"アップデート",updateConfirmTitle:"Spoolbuddyデーモンを更新しますか？",updateConfirmBody:'"{{hostname}}"のソフトウェア更新を実行しますか？更新後にデーモンが再起動されます。',restartBrowser:"ブラウザを再起動",restartBrowserConfirmTitle:"キオスクブラウザを再起動しますか？",restartBrowserConfirmBody:'"{{hostname}}"のキオスクブラウザを再起動しますか？画面が一時的に消えます。',restartDaemon:"デーモンを再起動",restartDaemonConfirmTitle:"Spoolbuddyデーモンを再起動しますか？",restartDaemonConfirmBody:'"{{hostname}}"のSpoolbuddyデーモンを再起動しますか？デバイスが数秒間オフラインになります。',reboot:"再起動",rebootConfirmTitle:"デバイスを再起動しますか？",rebootConfirmBody:'"{{hostname}}"を再起動しますか？デバイスは約1分間オフラインになります。',shutdown:"シャットダウン",shutdownConfirmTitle:"デバイスをシャットダウンしますか？",shutdownConfirmBody:'"{{hostname}}"をシャットダウンしますか？再起動には物理的なアクセスが必要です。',commandConfirm:"確認",commandQueued:"コマンドをキューに追加しました",commandError:"コマンドの送信に失敗しました"},ldap:{title:"LDAP認証",enabledDesc:"LDAP認証が有効です",disabledDesc:"LDAP認証が無効です",disabledHint:"以下のLDAP設定を構成して保存し、有効にしてください。",enabled:"LDAP認証を有効にしました",disabled:"LDAP認証を無効にしました",feature1:"LDAP資格情報でログインできます",feature2:"ローカル管理者アカウントはフォールバックとして残ります",feature3:"ログイン時にLDAPグループがBamBuddyグループにマッピングされます",serverConfig:"LDAPサーバー設定",serverUrl:"サーバーURL",serverUrlHint:"標準はldap://、SSL接続はldaps://を使用",security:"セキュリティ",securityHint:"StartTLSはプレーン接続をTLSにアップグレードします。LDAPSは最初からTLSを使用します。",bindDn:"バインドDN（サービスアカウント）",bindPassword:"バインドパスワード",searchBase:"検索ベースDN",userFilter:"ユーザー検索フィルター",userFilterHint:"{username}はログインユーザー名に置き換えられます。OpenLDAPの場合は(uid={username})を使用。",advanced:"詳細設定",autoProvision:"ユーザー自動作成",autoProvisionHint:"初回LDAPログイン時にBamBuddyアカウントを自動作成",defaultGroup:"デフォルトグループ",defaultGroupNone:"— なし（フォールバックなし）—",defaultGroupHint:"LDAPユーザーが認証されたがマッピングされたLDAPグループに属していない場合に割り当てられるフォールバックグループ。空欄の場合、マッピングされていないユーザーは権限なしのままになります。",groupMapping:"グループマッピング（JSON）",groupMappingHint:"LDAPグループDNをBamBuddyグループにマッピング。利用可能なグループ: ",testConnection:"接続テスト",settingsSaved:"LDAP設定を保存しました",errors:{serverRequired:"LDAPサーバーURLは必須です",searchBaseRequired:"検索ベースDNは必須です",enableAuthFirst:"先に認証を有効にしてください",configureLdapFirst:"先にLDAP設定を保存してください"}},email:{smtpSettings:"SMTP設定",smtpHost:"SMTPサーバー",smtpPort:"SMTPポート",security:"セキュリティ",authentication:"認証",username:"ユーザー名",password:"パスワード",fromEmail:"送信元メールアドレス",fromName:"送信者名",testConnection:"SMTP接続テスト",testRecipient:"テスト受信者メール",sendTest:"テストメール送信",sending:"送信中...",save:"設定を保存",saving:"保存中...",advancedAuth:"高度な認証",advancedAuthEnabled:"高度な認証が有効です",advancedAuthEnabledDesc:"メールベースのユーザー管理機能が有効になっています。新規ユーザーには自動生成されたパスワードがメールで送信され、ユーザーはパスワード忘れ機能でパスワードをリセットできます。",advancedAuthDisabled:"高度な認証が無効です",advancedAuthDisabledDesc:"高度な認証を有効にして、ユーザー管理のメールベース機能を有効化してください。",enable:"有効にする",disable:"無効にする",feature1:"パスワードは自動生成され、新規ユーザーにメールで送信されます",feature2:"ユーザーはユーザー名またはメールでログインできます",feature3:"パスワード忘れ機能が利用可能です",feature4:"管理者はメールでユーザーパスワードをリセットできます",errors:{requiredFields:"すべての必須フィールドに入力してください",usernameRequired:"認証が有効な場合、ユーザー名は必須です",enterTestEmail:"テストメールアドレスを入力してください",smtpServerAndEmail:"テストする前にSMTPサーバーと送信元メールを入力してください",usernamePasswordRequired:"認証が有効な場合、ユーザー名とパスワードは必須です",configureSmtpFirst:"最初にSMTP設定を構成してテストしてください",enableAuthFirst:"メール関連機能をご利用いただくには、まず認証を有効にしてください。"},success:{settingsSaved:"SMTP設定を保存しました"},securityOptions:{starttls:"STARTTLS (ポート 587)",ssl:"SSL/TLS (ポート 465)",none:"なし (ポート 25)"},authOptions:{enabled:"有効",disabled:"無効"}},appearance:"外観",notifications:"通知",smartPlugs:"スマートプラグ",spoolman:"Spoolman",updates:"アップデート",language:"言語",languageDescription:"表示言語を選択してください",theme:"テーマ",themeLight:"ライト",themeDark:"ダーク",themeSystem:"システム設定に従う",defaultView:"デフォルト画面",defaultViewDescription:"アプリ起動時に表示するページ",checkForUpdates:"アップデートを確認",autoUpdate:"自動アップデート",currentVersion:"現在のバージョン",latestVersion:"最新バージョン",upToDate:"最新です",updateAvailable:"アップデートあり",notificationLanguage:"通知の言語",notificationLanguageDescription:"プッシュ通知の言語",bedCooledThreshold:"ベッド冷却しきい値",bedCooledThresholdDescription:"印刷後にベッドが冷却されたと見なす温度",userNotificationsEnabled:"ユーザー通知",userNotificationsEnabledDescription:"ユーザー通知メニューと印刷ジョブイベントのメール通知を有効にします。高度な認証が必要です。",userNotificationsDisabledHint:"ユーザー通知を使用するには高度な認証を有効にしてください。",notificationProviders:"通知プロバイダー",addProvider:"プロバイダーを追加",editProvider:"プロバイダーを編集",providerType:"プロバイダーの種類",testNotification:"テスト通知",testSuccess:"テスト通知を送信しました",testFailed:"テスト通知の送信に失敗しました",quietHours:"おやすみ時間",quietHoursDescription:"この時間帯は通知を送信しません",quietHoursStart:"開始",quietHoursEnd:"終了",events:{title:"通知イベント",printStart:"印刷開始",printComplete:"印刷完了",printFailed:"印刷失敗",printStopped:"印刷中止",printProgress:"進捗マイルストーン",printProgressDescription:"25%, 50%, 75%で通知",printerOffline:"プリンターオフライン",printerError:"プリンターエラー",filamentLow:"フィラメント残量低下",maintenanceDue:"メンテナンス期限",maintenanceDueDescription:"メンテナンスが必要なときに通知"},smartPlug:{title:"スマートプラグ",add:"スマートプラグを追加",edit:"スマートプラグを編集",name:"名前",ipAddress:"IPアドレス",linkedPrinter:"連携プリンター",autoOn:"自動電源オン",autoOnDescription:"印刷開始時に電源を入れる",autoOff:"自動電源オフ",autoOffDescription:"印刷完了後に電源を切る",offDelay:"オフ遅延",offDelayMinutes:"印刷後の待機時間（分）",offDelayTemp:"ノズル温度が下回ったとき",currentState:"現在の状態",turnOn:"電源オン",turnOff:"電源オフ"},filamentTracking:"フィラメント追跡",filamentTrackingDesc:"フィラメントスプールの追跡方法を選択してください。内蔵インベントリまたは外部Spoolmanサーバーを使用できます。",filamentChecks:"フィラメントチェック",disableFilamentWarnings:"フィラメント警告を無効化",disableFilamentWarningsDesc:"印刷またはキュー追加時にフィラメント不足の警告を表示しない",preferLowestFilament:"残量が少ないフィラメントを優先",preferLowestFilamentDesc:"複数のスプールが一致する場合、残量が最も少ないものを使用します",trackingModeBuiltIn:"内蔵インベントリ",trackingModeBuiltInDesc:"RFID自動検出と使用量追跡を含む",trackingModeSpoolmanDesc:"外部フィラメント管理サーバー",builtInFeatureRfid:"AMS内のBambu Lab RFIDスプールを自動検出",builtInFeatureUsage:"プリントごとのフィラメント消費量を追跡",builtInFeatureCatalog:"スプール、カラー、K値プロファイルを管理",builtInFeatureThirdParty:"サードパーティ製スプールをインベントリスプールに割り当て可能",amsSyncButton:"AMSから重量を同期",amsSyncTitle:"AMSからスプール重量を同期",amsSyncMessage:"接続されたプリンターの現在のAMS残量値で、すべてのインベントリスプール重量を上書きします。破損した重量データの復旧に使用してください。プリンターがオンラインである必要があります。",amsSyncing:"同期中...",amsSyncSuccess:"{{synced}}個のスプールを同期、{{skipped}}個をスキップ",amsSyncError:"AMSからの重量同期に失敗しました",spoolmanAmsSyncButton:"AMSからSpoolmanの重量を同期",spoolmanAmsSyncTitle:"AMSからSpoolmanスプール重量を同期",spoolmanAmsSyncMessage:"接続されたプリンターの現在のAMS残量値に基づいて、すべてのSpoolmanスプール重量を更新します。プリンターがオンラインである必要があります。",spoolmanAmsSyncing:"同期中...",spoolmanAmsSyncSuccess:"{{synced}}個のSpoolmanスプールを同期、{{skipped}}個をスキップ",spoolmanAmsSyncError:"AMSからのSpoolman重量同期に失敗しました",spoolmanAmsSyncErrorUnreachable:"同期失敗（Spoolmanに接続できません）",spoolmanAmsSyncErrorNotConfigured:"同期失敗（Spoolmanが設定されていません）",spoolmanNotConfigured:"Spoolmanが設定されていません",spoolmanFilamentCatalogTitle:"Spoolmanフィラメントカタログ",spoolmanFilamentCatalogDesc:"Spoolmanインスタンスのフィラメント名と風袋重量。名前とスプール重量はここで編集できます。その他の属性はSpoolmanで直接管理してください。",spoolmanUrl:"Spoolman URL",spoolmanUrlHint:"Spoolmanサーバーのurl（例：http://localhost:7912）",spoolmanConnected:"接続中",spoolmanDisconnected:"未接続",status:"ステータス",connect:"接続",disconnect:"切断",howSyncWorks:"同期の仕組み",syncInfoRfidOnly:"RFIDを搭載した公式Bambu Labスプールのみ同期されます",syncInfoAutoCreate:"新しいスプールは初回同期時にSpoolmanに自動作成されます",syncInfoThirdPartySkipped:"Bambu Lab以外のスプール（サードパーティ、リフィル）はスキップされます",linkingExistingSpools:"既存スプールのリンク",linkingExistingSpoolsDesc:"既存のSpoolmanスプールをAMSにリンクするには、AMSスロットにカーソルを合わせて「Spoolmanにリンク」をクリックしてください。",syncMode:"同期モード",syncModeAuto:"自動",syncModeManual:"手動のみ",syncModeAutoDesc:"変更が検出されるとAMSデータが自動的に同期されます",syncModeManualDesc:"手動でトリガーした場合のみ同期",syncAmsData:"AMSデータを同期",syncAmsDataDesc:"プリンターのAMSデータをSpoolmanに手動同期",allPrinters:"全プリンター",noDefaultPrinter:"デフォルトなし（毎回選択）",sidebarOrder:"サイドバーの順序",saveThumbnails:"サムネイルを保存",captureFinishPhoto:"完了写真を撮影",noPrintersConfigured:"プリンターが設定されていません",archiveMode:{always:"常にアーカイブを作成",never:"アーカイブを作成しない",ask:"毎回確認"},checkForUpdatesLabel:"アップデートを確認",checkPrinterFirmware:"プリンターファームウェアの確認",includeBetaUpdates:"ベータ版を含める",includeBetaUpdatesDesc:"アップデート確認時にベータ版およびプレリリース版を通知する",enableRetry:"リトライを有効化",homeAssistantDescription:"Home Assistantに接続してHA REST APIでスマートプラグを制御します。switch、light、input_booleanエンティティに対応しています。",environmentManagedLabel:"(環境変数で管理)",autoEnabledViaEnv:"環境変数により自動的に有効化されました",urlFromEnvReadOnly:"HA_URL環境変数で設定された値（読み取り専用）",tokenFromEnvReadOnly:"HA_TOKEN環境変数で設定された値（読み取り専用）",mqttConnectedTo:"接続先:",prometheusDescription:"プリンターデータをPrometheus形式で公開",noSmartPlugsTitle:"スマートプラグが設定されていません",noSmartPlugsDescription:"Tasmotaベースのスマートプラグを追加して、エネルギー消費を追跡し、電源制御を自動化します。",noProvidersTitle:"プロバイダーが設定されていません",noProvidersDescription:"アラートを受信するにはプロバイダーを追加してください。",noTemplatesAvailable:"テンプレートがありません。バックエンドを再起動してデフォルトテンプレートを生成してください。",apiPermissionView:"プリンターステータスとキューを表示",apiPermissionEdit:"印刷キューにアイテムを追加・削除",apiKeysEmptyTitle:"APIキーがありません",apiKeysEmptyDescription:"外部サービスと連携するためのAPIキーを作成してください。",noUsersFound:"ユーザーが見つかりません",noGroupsFound:"グループが見つかりません",noGroupsAvailable:"利用可能なグループがありません",passwordsDoNotMatch:"パスワードが一致しません",systemGroupWarning:"システムグループ名は変更できません",authDisabledTitle:"認証が無効です",authDisabledFeature1:"システムへのアクセスにログインを要求",authDisabledFeature2:"グループベースの権限で複数ユーザーを作成",authDisabledFeature3:"50以上のきめ細かな権限でアクセスを制御",userHasCreated:"このユーザーは以下を作成しています：",userItemsQuestion:"これらのアイテムをどうしますか？",deleteUserConfirm:"このユーザーを削除してもよろしいですか？この操作は元に戻せません。",actionCannotBeUndone:"この操作は元に戻せません",addFirstSmartPlug:"最初のスマートプラグを追加",providers:"プロバイダー",log:"ログ",testAll:"すべてテスト",testResults:"テスト結果",testPassedCount:"{{count}}件成功",testFailedCount:"{{count}}件失敗",messageTemplates:"メッセージテンプレート",messageTemplatesDescription:"各イベントの通知メッセージをカスタマイズ。",apiKeys:"APIキー",apiKeysDescription:"外部連携やWebhook用のAPIキーを作成します。",createKey:"キーを作成",apiKeyCreated:"APIキーを作成しました",apiKeyCopyWarning:"今すぐこのキーをコピーしてください - 再表示されません！",useInApiBrowser:"APIブラウザーで使用",createNewApiKey:"新しいAPIキーを作成",keyName:"キー名",keyNamePlaceholder:"例: Home Assistant, OctoPrint",readStatus:"ステータスの読み取り",readStatusDescription:"プリンターのステータスとキューを表示",manageQueue:"キューの管理",manageQueueDescription:"印刷キューへのアイテムの追加と削除",controlPrinter:"プリンターの制御",controlPrinterDescription:"印刷の一時停止、再開、停止",manageLibrary:"ライブラリの管理",manageLibraryDescription:"ライブラリファイルのアップロード、名前変更、削除。MakerWorld からのモデルインポート。",manageInventory:"在庫の管理",manageInventoryDescription:"スプールと在庫レコードの作成、更新、削除。SpoolBuddy キオスク（NFC スキャン、はかり読み取り、キオスクのシステムコマンド）に必要です。",libraryBadge:"ライブラリ",inventoryBadge:"在庫",cloudAccess:"クラウドアクセスを許可",cloudAccessDescription:"Bambu Cloudのプリセットとフィラメントを代わりに読み込みます。Bambu Cloudへのサインインが必要です。",cloudBadge:"クラウド",updateEnergyCost:"電気料金を更新",updateEnergyCostDescription:"このキーが /settings/electricity-price に新しいkWhごとの電気料金をPOSTすることを許可。Home Assistantの動的料金自動化（Tibber、Octopusなど）に便利。これはAPIキーで書き込み可能な唯一の設定フィールドです。",energyCostBadge:"電力",legacyKey:"レガシー",legacyKeyTooltip:"ユーザー所有以前に作成 - クラウドアクセスには再作成が必要",unnamedKey:"名前なしキー",lastUsed:"最終使用:",read:"読み取り",control:"制御",createFirstKey:"最初のキーを作成",webhookEndpoints:"Webhookエンドポイント",webhookApiKeyHint:"X-API-KeyヘッダーでAPIキーを使用してください。",webhook:{getAllStatus:"全プリンターステータスを取得",getSpecificStatus:"特定のプリンターステータスを取得",addToQueue:"印刷キューに追加",pausePrint:"印刷を一時停止",resumePrint:"印刷を再開",stopPrint:"印刷を停止"},apiBrowser:"APIブラウザ",apiBrowserDescription:"すべての利用可能なAPIエンドポイントを探索してテストします。",apiKeyForTesting:"テスト用APIキー",apiKeyPlaceholder:"CallMeBot APIキー",apiKeyHint:"このキーはX-API-Keyヘッダーとしてリクエストに送信されます。",deleteApiKeyTitle:"APIキーを削除",deleteApiKeyMessage:"このAPIキーを削除してもよろしいですか？このキーを使用しているすべての連携が動作しなくなります。",deleteKey:"キーを削除",amsDisplayThresholds:"AMS表示しきい値",amsThresholdsDescription:"AMS湿度と温度インジケーターの色しきい値を設定します。",humidity:"湿度",goodGreen:"良好（緑）≤",fairOrange:"普通（オレンジ）≤",aboveFairBad:"普通のしきい値以上は赤（悪い）で表示",fairAlsoDryingThreshold:"このしきい値は自動乾燥のトリガーにも使用されます",temperature:"温度",goodBlue:"良好（青）≤",aboveFairHot:"普通のしきい値以上は赤（高温）で表示",historyRetention:"履歴の保持",keepSensorHistory:"センサー履歴の保持期間",historyRetentionDescription:"古い湿度と温度データは自動的に削除されます",defaultPrintOptions:"デフォルト印刷オプション",defaultPrintOptionsDescription:"新しい印刷のデフォルト値を設定します。印刷ダイアログで個別に変更できます。",defaultBedLevelling:"ベッドレベリング",defaultBedLevellingDesc:"印刷前にベッドを自動レベリング",defaultFlowCali:"フローキャリブレーション",defaultFlowCaliDesc:"押出フローのキャリブレーション",defaultVibrationCali:"振動キャリブレーション",defaultVibrationCaliDesc:"リンギングアーティファクトを低減",defaultLayerInspect:"第1層検査",defaultLayerInspectDesc:"AIによる第1層の検査",defaultTimelapse:"タイムラプス",defaultTimelapseDesc:"タイムラプス動画を記録",staggeredStart:"段階的開始",staggeredStartDescription:"複数プリンターのバッチ開始を段階的に行う際のデフォルトのグループサイズと間隔。プリントモーダルでバッチごとに上書き可能。",plateClear:"プレートクリア確認",requirePlateClear:"プレートクリア確認を必須にする",requirePlateClearDescription:"有効にすると、スケジューラーは完了したプリンターでキューの印刷を開始する前に、プリンターごとのプレートクリア確認を待ちます。無効にすると、プリンターカード上のプレート状態バッジと「プレートをクリア済みにする」ボタンも非表示になります。",gcodeInjection:"G-codeインジェクション",gcodeInjectionDescription:"Farmloop、SwapMod、AutoClear、Printflow 3Dなどの自動印刷システム用に、印刷の開始と終了時にカスタムG-codeを挿入します。スニペットはプリンターモデルごとに設定し、キューアイテム��「G-codeを挿入」を有効にすると適用されます。",gcodeInjectionNoPrinters:"プリンターが見つかりません。G-codeスニペットを設定するにはプリンターを追加してください。",gcodeStartLabel:"開始G-code",gcodeEndLabel:"終了G-code",gcodeStartPlaceholder:"印刷開始前に挿入されるG-code...",gcodeEndPlaceholder:"印刷終了後に追加されるG-code...",staggerGroupSize:"グループサイズ",staggerGroupSizeHelp:"グループあたり同時に開始するプリンター数",staggerInterval:"間隔（分）",staggerIntervalHelp:"各グループ開始までの遅延",queueDrying:"自動乾燥",queueDryingDescription:"キュー印刷の合間にプリンターがアイドル状態の時、AMSフィラメントを自動的に乾燥します。上記の湿度しきい値を使用します。",queueDryingEnabled:"自動乾燥を有効にする",queueDryingEnabledDescription:"プリンターがアイドル状態で湿度がしきい値を超えた場合、AMS乾燥を自動的に開始",queueDryingBlock:"乾燥完了まで待機",queueDryingBlockDescription:"乾燥が完了するまで印刷キューをブロックします。オフの場合、印刷が優先されます。",ambientDryingEnabled:"常時乾燥",ambientDryingEnabledDescription:"キューに関係なく、アイドル状態のプリンターで湿度がしきい値を超えた場合に自動的にフィラメントを乾燥。",dryingPresets:"乾燥プリセット",dryingPresetsDescription:"フィラメントタイプごとの温度と時間。AMS 2 Proは低温、AMS-HTは高温に対応。",dryingFilament:"フィラメント",printModal:"印刷ダイアログ",expandCustomMapping:"カスタムマッピングをデフォルトで展開",expandCustomMappingDescription:"複数プリンターに印刷する際、プリンターごとのAMSマッピングを展開表示",authentication:"認証",authEnabledDescription:"ユーザー認証でインスタンスが保護されています",authDisabledDescription:"認証を有効にして、ユーザーアカウントの作成、権限の管理、Bambuddyインスタンスのセキュリティを確保しましょう。",authDisabledMessage:"認証を有効にして、ユーザーアカウントの作成、権限の管理、Bambuddyインスタンスのセキュリティを確保しましょう。",enableAuthentication:"認証を有効にする",currentUser:"現在のユーザー",changePassword:"パスワードを変更",admin:"管理者",users:"ユーザー",addUser:"ユーザーを追加",groups:"グループ",addGroup:"グループを追加",system:"システム",noDescription:"説明なし",userCount:"{{count}}人のユーザー",permissionCount:"{{count}}件の権限",createUser:"ユーザーを作成",username:"ユーザー名",enterUsername:"ユーザー名を入力",password:"パスワード",enterPassword:"パスワードを入力",passwordRequirements:"大文字、小文字、数字、特殊文字を各1文字以上含む8文字以上。",confirmPassword:"パスワードの確認",confirmPasswordPlaceholder:"パスワードを確認",viewReleaseOnGitHub:"GitHubでリリースを表示",turnAllPlugsOn:"すべてのプラグをオン",turnAllPlugsOff:"すべてのプラグをオフ",clearNotificationLogs:"通知ログをクリア",clearLogsMessage:"30日以上前のすべての通知ログを完全に削除します。この操作は元に戻せません。",clearLogs:"通知ログを削除",resetUiPreferences:"UI設定をリセット",resetUiPreferencesMessage:"すべてのUI設定をデフォルトにリセットします：サイドバー順序、テーマ、ダッシュボードレイアウト、表示モード、ソート設定。プリンター、アーカイブ、サーバー設定は影響を受けません。クリア後にページがリロードされます。",resetPreferences:"設定をリセット",deleteGroupTitle:"グループを削除",deleteGroupMessage:"このグループを削除しますか？このグループのユーザーはこれらの権限を失います。",deleteGroup:"グループを削除",disableAuthenticationTitle:"認証を無効化",disableAuthenticationMessage:"認証を無効にしますか？Bambuddyインスタンスにログインなしでアクセスできるようになります。ユーザーはデータベースに残りますが、認証は無効になります。",disableAuthentication:"認証を無効化",configureBambuddy:"Bambuddyを設定",systemDefault:"システムデフォルト",archiveSettings:"アーカイブ設定",newWindow:"新しいウィンドウ",embeddedOverlay:"埋め込みオーバーレイ",preferredSlicer:"優先スライサー",preferredSlicerDescription:"ファイルを開くスライサーアプリケーションを選択",orcaslicerKnownIssuesWarning:"OrcaSlicer 2.3.2 / 2.4.0-devには、Bambu作成の3MFの多くをスライスできない既知のCLIバグがあります — 上流イシュー#12426（ペイント済みマルチエクストルーダーファイルでのsegfault）および#13386（パラメータ範囲の厳格検証拒否）を参照。上流の修正がリリースされるまで、Bambu Studioを推奨します。",useSlicerApi:"スライサーAPIを使用",useSlicerApiDescription:"オンの場合、「Slice」アクションはアプリ内スライサーモーダルを開き、slicer-APIサイドカーを呼び出します。オフ（デフォルト）の場合、URIスキーム経由でデスクトップスライサーに引き継がれます。",slicerCard:"スライサー",orcaslicerApiUrl:"OrcaSlicer sidecar URL",bambuStudioApiUrl:"Bambu Studio sidecar URL",slicerApiUrlDescription:"slicer-APIサイドカーコンテナのURL。空のままにすると SLICER_API_URL / BAMBU_STUDIO_API_URL 環境変数のデフォルト値が使用されます。",slicerBundles:{title:"スライサーバンドル",description:'BambuStudioからエクスポートされたPrinter Preset Bundle（.bbscfg）をインポートします（ファイル → エクスポート → プリセットバンドルをエクスポート → "Printer preset bundle"）。インポート後、スライス要求はJSONプロファイルトリプレットを再アップロードせずにバンドルから名前でプリセットを選択できます。',uploadButton:"バンドルをアップロード",uploading:"アップロード中…",loading:"バンドルを読み込み中…",empty:"バンドルはまだインポートされていません。",summary:"{{processCount}}プロセス · {{filamentCount}}フィラメントプリセット",delete:"削除",uploadSuccess:"{{name}}をインポート済み",uploadError:"バンドルのアップロードに失敗: {{message}}",deleteSuccess:"バンドルを削除しました",deleteError:"バンドルの削除に失敗: {{message}}",confirmDeleteTitle:"このバンドルを削除しますか？",confirmDeleteMessage:"「{{name}}」を参照するスライス要求は、バンドルを再インポートするまで失敗します。"},externalCameras:"外部カメラ",costTracking:"コスト追跡",printsOnly:"印刷のみ",totalConsumption:"総消費量",dataManagement:"データ管理",storageUsage:"ストレージ使用量",storageUsageDescription:"カテゴリ別のデータ使用量の内訳",storageUsageTotal:"合計",storageUsageErrors:"エラー",storageUsageOtherBreakdown:"その他（静的アセット、スクリプト、設定ファイルを含む）",storageUsageSystem:"システム",storageUsageData:"データ",storageUsageUnavailable:"ストレージ使用量情報は利用できません",clearNotificationLogsDescription:"30日以上前の通知ログを削除",resetUiPreferencesDescription:"サイドバー順序、テーマ、表示モード、レイアウト設定をリセット。プリンター、アーカイブ、設定は影響を受けません。",enableHomeAssistant:"Home Assistantを有効化",enableMqtt:"MQTTを有効化",useTls:"TLSを使用",enableMetricsEndpoint:"メトリクスエンドポイントを有効化",availableMetrics:"利用可能なメトリクス",editUser:"ユーザーを編集",deleteUserTitle:"ユーザーを削除",groupName:"グループ名",leaveEmptyForAnonymous:"匿名の場合は空のまま",leaveEmptyForNoAuth:"認証なしの場合は空のまま",enterNewPassword:"新しいパスワードを入力",confirmNewPassword:"新しいパスワードを確認",enterGroupName:"グループ名を入力",enterDescriptionOptional:"説明を入力（任意）",enterCurrentPassword:"現在のパスワードを入力",enterNewPasswordMin6:"新しいパスワードを入力（6文字以上）",toast:{keyCopied:"キーをクリップボードにコピーしました",copyFailed:"キーのコピーに失敗しました",keyAddedToBrowser:"キーをAPIブラウザに追加しました",clearLogsFailed:"ログの削除に失敗しました",uiPreferencesReset:"UI設定をリセットしました。更新中...",authDisabled:"認証を無効にしました",authDisableFailed:"認証の無効化に失敗しました",apiKeyCreated:"APIキーを作成しました",apiKeyDeleted:"APIキーを削除しました",userCreated:"ユーザーが正常に作成されました",userUpdated:"ユーザーが正常に更新されました",userDeleted:"ユーザーが正常に削除されました",groupCreated:"グループを作成しました",groupUpdated:"グループを更新しました",groupDeleted:"グループを削除しました",fillRequiredFields:"必須項目をすべて入力してください",passwordsDoNotMatch:"パスワードが一致しません",passwordTooShort:"パスワードは8文字以上必要です",passwordNeedsUppercase:"パスワードには少なくとも1つの大文字を含める必要があります",passwordNeedsLowercase:"パスワードには少なくとも1つの小文字を含める必要があります",passwordNeedsDigit:"パスワードには少なくとも1つの数字を含める必要があります",passwordNeedsSpecial:"パスワードには少なくとも1つの特殊文字を含める必要があります",enterGroupName:"グループ名を入力",settingsSaved:"設定を保存しました",noPermissionUpdate:"設定を変更する権限がありません",cameraSettingsSaved:"カメラ設定を保存しました",enterCameraUrl:"カメラURLを入力してください",passwordChanged:"パスワードが正常に変更されました",connectionFailed:"接続失敗",testFailed:"テスト通知の送信に失敗しました",cameraConnected:"カメラ接続{{resolution}}"},testConnection:"接続テスト",catalog:{spoolCatalog:"スプールカタログ",spoolCatalogDescription:"ブランド/タイプ別の空スプール重量。スプール追加時の自動重量検索に使用されます。",searchCatalog:"カタログを検索...",addNewEntry:"新しいエントリを追加",namePlaceholder:"名前（例：Bambu Lab - プラスチック）",weight:"重量",type:"タイプ",default:"デフォルト",custom:"カスタム",noMatch:"検索に一致するエントリがありません",empty:"カタログにエントリがありません",deleteEntry:"エントリを削除",deleteConfirm:"「{{name}}」を削除してもよろしいですか？",resetCatalog:"カタログをリセット",resetConfirm:"カタログをデフォルトにリセットしますか？カスタムエントリはすべて削除されます。",loadFailed:"スプールカタログの読み込みに失敗しました",nameWeightRequired:"名前と重量は必須です",entryAdded:"エントリを追加しました",addFailed:"エントリの追加に失敗しました",entryUpdated:"エントリを更新しました",updateFailed:"エントリの更新に失敗しました",entryDeleted:"エントリを削除しました",deleteFailed:"エントリの削除に失敗しました",resetSuccess:"カタログをデフォルトにリセットしました",resetFailed:"カタログのリセットに失敗しました",exported:"{{count}}件のエントリをエクスポートしました",imported:"{{added}}件のエントリをインポートしました（{{skipped}}件スキップ）",importFailed:"インポートに失敗しました：無効なJSON形式",exportTooltip:"カタログをJSONにエクスポート",importTooltip:"JSONからカタログをインポート",resetTooltip:"デフォルトにリセット",selectedCount:"{{count}}件選択中",deleteSelected:"選択を削除",bulkDeleteConfirm:"{{count}}件のエントリーを削除してもよろしいですか？",bulkDeleted:"{{count}}件のエントリーを削除しました",bulkDeleteFailed:"エントリーの削除に失敗しました",material:"材料",spoolWeight:"スプール重量",color:"色",updateSpoolWeight:"スプール重量を更新",filamentUpdated:"フィラメントを更新しました",filamentUpdateFailed:"フィラメントの更新に失敗しました",filamentUpdateInvalid:"フィラメントデータが無効です",keepExistingSpoolWeight:"既存スプールの旧重量を保持",keepExistingSpoolWeightDesc:"このフィラメントタイプで既に作成されたスプールは旧風袋重量を保持します。新しいスプールは更新後の値を使用します。",applyToAllSpools:"全スプールに適用",applyToAllSpoolsDesc:"このフィラメントタイプの全重量計算に新しい風袋重量が即座に適用されます。"},colorCatalog:{title:"カラーカタログ",description:"メーカー/素材別のフィラメントカラー。スプール追加時の自動カラー検索に使用されます。",searchColors:"カラーを検索...",allManufacturers:"すべてのメーカー",addNewColor:"新しいカラーを追加",manufacturer:"メーカー",colorName:"カラー名",hex:"16進数",materialOptional:"素材（任意）",showing:"{{total}}件中{{filtered}}件を表示",noMatch:"検索に一致するカラーがありません",empty:"カタログにカラーがありません",deleteColor:"カラーを削除",deleteConfirm:"「{{name}}」を削除してもよろしいですか？",resetCatalog:"カラーカタログをリセット",resetConfirm:"カタログをデフォルトにリセットしますか？カスタムカラーはすべて削除されます。",sync:"同期",starting:"開始中...",syncTooltip:"FilamentColors.xyzから同期（2000+カラー）",loadFailed:"カラーカタログの読み込みに失敗しました",fieldsRequired:"メーカー、カラー名、Hexカラーは必須です",colorAdded:"カラーを追加しました",addFailed:"カラーの追加に失敗しました",colorUpdated:"カラーを更新しました",updateFailed:"カラーの更新に失敗しました",colorDeleted:"カラーを削除しました",deleteFailed:"カラーの削除に失敗しました",resetSuccess:"カラーカタログをデフォルトにリセットしました",resetFailed:"カタログのリセットに失敗しました",syncUpToDate:"最新の状態です（{{count}}件のカラーを確認）",syncComplete:"{{added}}件の新しいカラーを追加しました（{{skipped}}件は既に存在）",syncError:"同期エラー",syncFailed:"FilamentColors.xyzからの同期に失敗しました",exported:"{{count}}件のカラーをエクスポートしました",imported:"{{added}}件のカラーをインポートしました（{{skipped}}件スキップ）",importFailed:"インポートに失敗しました：無効なJSON形式",selectedCount:"{{count}}件選択中",deleteSelected:"選択を削除",bulkDeleteConfirm:"{{count}}件のカラーを削除してもよろしいですか？",bulkDeleted:"{{count}}件のカラーを削除しました",bulkDeleteFailed:"カラーの削除に失敗しました"},dateFormat:"日付形式",dateFormatUs:"米国 (MM/DD/YYYY)",dateFormatEu:"EU (DD/MM/YYYY)",dateFormatIso:"ISO (YYYY-MM-DD)",timeFormat:"時刻形式",timeFormat12:"12時間制 (3:30 PM)",timeFormat24:"24時間制 (15:30)",defaultPrinter:"デフォルトプリンター",defaultPrinterDescription:"アップロード、再印刷、その他の操作でこのプリンターを事前選択します。",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"サイドバーの項目をドラッグして並べ替え。ここでデフォルトの順序にリセット。",setDefault:"デフォルト設定",sidebarOrderSetDefaultHint:"デフォルト設定は、まだカスタマイズしていないユーザーに現在のメニュー順序を適用します。",sidebarDefaultSet:"デフォルトメニュー順序を設定しました。",sidebarDefaultCleared:"デフォルトメニュー順序をクリアしました。",sidebarDefaultFailed:"デフォルトメニュー順序の設定に失敗しました。",reset:"リセット",darkMode:"ダークモード",lightMode:"ライトモード",active:"(アクティブ)",background:"背景",accent:"アクセント",style:"スタイル",bgNeutral:"ニュートラル",bgWarm:"ウォーム",bgCool:"クール",bgOled:"OLEDブラック",bgSlate:"スレートブルー",bgForest:"フォレストグリーン",accentGreen:"グリーン",accentTeal:"ティール",accentBlue:"ブルー",accentOrange:"オレンジ",accentPurple:"パープル",accentRed:"レッド",styleClassic:"クラシック",styleGlow:"グロー",styleVibrant:"ビビッド",themeToggleHint:"サイドバーのアイコンでダーク、ライト、システムモードを切り替えます。",autoArchivePrints:"印刷を自動アーカイブ",autoArchiveDescription:"印刷完了時に3MFファイルを自動保存",saveThumbnailsDescription:"3MFファイルからプレビュー画像を抽出して保存",captureFinishPhotoDescription:"印刷完了時にプリンターカメラから写真を撮影します。Bambuddy は印刷中に短いタイムラプスを記録し、ベッドが下がる前の瞬間から写真を取得できるようにします。この印刷でタイムラプスを有効にしていた場合はタイムラプスファイルが保存され、それ以外の場合は写真の取得後に自動的に削除されます。",ffmpegNotInstalled:"ffmpegがインストールされていません",ffmpegRequired:"カメラ撮影にはffmpegが必要です。<brew>brew install ffmpeg</brew>（macOS）または<apt>apt install ffmpeg</apt>（Linux）でインストールしてください。",camera:"カメラ",cameraViewMode:"カメラ表示モード",cameraOverlayDescription:"メイン画面上にリサイズ可能なオーバーレイでカメラを表示",cameraWindowDescription:"別のブラウザウィンドウでカメラを表示",externalCamerasDescription:"内蔵プリンターカメラの代わりに外部カメラを設定。MJPEGストリーム、RTSP、HTTPスナップショット、USBカメラ（V4L2）をサポート。有効にすると、ライブビューと完了写真に外部カメラが使用されます。",cameraPlaceholderUsb:"デバイスパス (/dev/video0)",cameraPlaceholderUrl:"カメラURL (rtsp://... または http://...)",cameraTypeMjpeg:"MJPEGストリーム",cameraTypeRtsp:"RTSPストリーム",cameraTypeSnapshot:"HTTPスナップショット",cameraTypeUsb:"USBカメラ (V4L2)",cameraSnapshotUrl:"スナップショットURL（任意）",cameraSnapshotUrlPlaceholder:"http://192.168.1.61:1984/api/frame.jpeg?src=printer",cameraSnapshotUrlHelp:"通知サムネイル、終了写真、レイヤータイムラプスフレーム、プレート検出に使用される単一フレームURL。タイムラプスとプレート検出はそれぞれプリンターごとのトグルが必要 — このURLはアクティブ時の画像ソースに過ぎません。上記のライブストリームから取得する場合は空のままにします。go2rtc（/api/frame.jpeg）や専用スナップショットエンドポイントを持つIPカメラに便利です。",cameraRotation:"回転",test:"テスト",connected:"接続済み",disconnected:"未接続",currency:"通貨",defaultFilamentCost:"デフォルトフィラメントコスト（kg単価）",electricityCost:"電気料金（kWh単価）",energyDisplayMode:"エネルギー表示モード",energyModePrintDescription:"ダッシュボードに印刷中の消費エネルギーの合計を表示",energyModeTotalDescription:"ダッシュボードにスマートプラグの累計エネルギーを表示",fileManager:"ファイルマネージャー",createArchiveEntry:"印刷時にアーカイブエントリを作成",createArchiveEntryDescription:"ファイルマネージャーから印刷時に、オプションでアーカイブエントリを作成",lowDiskSpaceWarning:"ディスク容量不足の警告",lowDiskSpaceDescription:"空きディスク容量がこのしきい値を下回った場合に警告を表示",printerFirmware:"プリンターファームウェア",checkFirmwareDescription:"Bambu Labのプリンターファームウェア更新を確認",bambuddySoftware:"Bambuddyソフトウェア",autoCheckDescription:"起動時に自動的に新しいバージョンを確認",checkNow:"今すぐ確認",updateAvailableVersion:"アップデート利用可能: v{{version}}",releaseNotes:"リリースノート",updateViaDocker:"Docker Composeでアップデート:",updateViaHomeAssistant:"アップデートはHome Assistant Supervisorによって管理されます。Home Assistantの設定→アドオン→Bambuddyを開いて新しいバージョンをインストールしてください。",installUpdate:"アップデートをインストール",latestVersionRunning:"最新バージョンを使用しています",failedToCheckUpdates:"アップデートの確認に失敗しました: {{error}}",backupRestore:"バックアップと復元",backupRestoreDescription:"設定のエクスポート/インポートとGitHubバックアップの設定",goToBackup:"バックアップへ",externalUrl:"外部URL",externalUrlDescription:"Bambuddyがアクセス可能な外部URL。通知画像や外部連携に使用されます。",bambuddyUrl:"BambuddyのURL",externalUrlHint:"プロトコルとポートを含めてください（例: http://192.168.1.100:8000）",ftpRetry:"FTPリトライ",ftpRetryDescription:"プリンターのWi-Fiが不安定な場合にFTP操作をリトライ。3MFダウンロード、印刷アップロード、タイムラプスダウンロード、ファームウェア更新に適用。",autoRetryDescription:"失敗したFTP操作を自動的にリトライ",retryAttempts:"リトライ回数",retryDelay:"リトライ遅延",connectionTimeout:"接続タイムアウト",time_one:"{{count}}回",time_other:"{{count}}回",second_one:"{{count}}秒",second_other:"{{count}}秒",nSeconds:"{{count}}秒",increaseForWeakWifi:"Wi-Fiが弱いプリンター用に増やしてください",homeAssistant:"Home Assistant",homeAssistantFullDescription:"Home Assistantに接続してHA REST API経由でスマートプラグを制御。switch、light、input_boolean、scriptエンティティをサポート。",homeAssistantUrl:"Home Assistant URL",longLivedAccessToken:"長期アクセストークン",haTokenHint:"HAでトークンを作成: プロフィール → 長期アクセストークン → トークンを作成",connectionSuccessful:"接続成功",connectionFailed:"接続失敗",haConnectionSuccess:"Home Assistantへの接続に成功しました。",haConnectionFailed:"Home Assistantへの接続に失敗しました。",mqttPublishing:"MQTTパブリッシュ",mqttDescription:"Node-RED、Home Assistant、その他の自動化システムとの統合のため、外部MQTTブローカーにBamBuddyイベントをパブリッシュ。",mqttEnableDescription:"外部MQTTブローカーにイベントをパブリッシュ",brokerHostname:"ブローカーホスト名",port:"ポート",usernameOptional:"ユーザー名（オプション）",passwordOptional:"パスワード（オプション）",topicPrefix:"トピックプレフィックス",topicPrefixHint:"トピック形式: {{prefix}}/printers/<serial>/status 等",prometheusMetrics:"Prometheusメトリクス",prometheusEndpointDescription:"Prometheus/Grafanaモニタリング用に<code>/api/v1/metrics</code>でプリンターメトリクスを公開。",bearerTokenOptional:"Bearerトークン（オプション）",bearerTokenHint:"設定時、リクエストに<code>Authorization: Bearer <token></code>が必要",metricsConnectionStatus:"接続状態",metricsPrinterState:"プリンター状態（idle/printing等）",metricsPrintProgress:"印刷進捗 0-100%",metricsBedTemp:"ベッド温度",metricsNozzleTemp:"ノズル温度",metricsPrintsTotal:"結果別の総印刷数",metricsMore:"...その他（レイヤー、ファン、キュー、フィラメント使用量）",smartPlugsDescription:"スマートプラグ（TasmotaまたはHome Assistant）を接続して、電源制御の自動化とプリンターのエネルギー使用量を追跡。",allOn:"すべてオン",allOff:"すべてオフ",addSmartPlug:"スマートプラグを追加",energySummary:"エネルギー概要",currentPower:"現在の消費電力",plugsOnline:"{{reachable}}/{{total}}プラグオンライン",today:"今日",yesterday:"昨日",total:"合計",enablePlugsForSummary:"プラグを有効にしてエネルギー概要を表示",addNotificationProvider:"追加",systemBadge:"(システム)",creating:"作成中...",changing:"変更中...",deleteUserAndItems:"ユーザーとそのアイテムを削除",deleteUserKeepItems:"ユーザーを削除、アイテムは保持（オーナーなしになります）",ok:"OK",twoFa:{totpTitle:"認証アプリ (TOTP)",totpDesc:"Google Authenticator、Aegis、Authyなどのアプリを使用します。",emailOtpTitle:"メールOTP",emailOtpDesc:"ログイン時に{{email}}にワンタイムコードを送信します。",emailOtpNoEmail:"この方法を有効にするには、アカウントにメールアドレスを追加してください。",addEmailFirst:"アカウントにメールアドレスがありません。管理者に追加を依頼してください。",setupTotp:"認証アプリを設定",setupAuthApp:"認証アプリを設定",setupInstructions:"認証アプリでQRコードをスキャンし、コードで確認してください。",manualEntry:"スキャンできない場合は、このシークレットを手動で入力してください:",scannedContinue:"コードをスキャンしました — 続ける",enterCodeToConfirm:"認証アプリの6桁のコードを入力して設定を確認してください。",activate:"有効化",disableTotp:"認証アプリを無効化",disableConfirmHint:"認証アプリを無効にするには、有効なTOTPコードまたはバックアップコードを入力してください。",totpDisabled:"認証アプリが無効化されました。",emailOtpEnabled:"メールOTPが有効化されました。",emailOtpDisabled:"メールOTPが無効化されました。",smtpRequired:"先にSMTP設定を構成してテストしてください。",invalidCode:"無効なコードです。もう一度お試しください。",enableEmailOtp:"メールOTPを有効化",disableEmailOtp:"メールOTPを無効化",emailSetupEnterCode:"確認コードがメールアドレスに送信されました。このメールボックスを所有していることを確認するために、以下に入力してください。",verifyAndEnable:"確認して有効化",emailDisablePasswordHint:"メールOTPの無効化を確認するには、アカウントのパスワードを入力してください。",passwordPlaceholder:"パスワードを入力してください",backupCodesTitle:"バックアップコードを保存",backupCodesWarning:"これらのコードを安全な場所に保存してください。各コードは一度しか使用できません。",backupCodesRemaining:"バックアップコード残り{{count}}個",savedCodes:"コードを保存しました",regenBackup:"バックアップコードを再生成",regenBackupHint:"現在のTOTPコードを入力して10個の新しいバックアップコードを生成します。",newBackupCodes:"新しいバックアップコード",linkedAccounts:"リンクされたSSOアカウント",linkedAccountsDesc:"これらの外部IDプロバイダーがあなたのアカウントにリンクされています。",oidcUnlinked:"アカウントのリンクを解除しました。"},oidc:{title:"SSO / OIDCプロバイダー",desc:"シングルサインオン用のOpenID Connectプロバイダーを設定します。",addProvider:"プロバイダーを追加",newProvider:"新しいプロバイダー",empty:"OIDCプロバイダーがまだ設定されていません。",created:"プロバイダーが作成されました。",updated:"プロバイダーが更新されました。",deleted:"プロバイダーが削除されました。",refreshIcon:"アイコンを再取得",removeIcon:"アイコンを削除",iconRefreshed:"アイコンを更新しました。",iconRemoved:"アイコンを削除しました。",iconFetchFailed:"プロバイダーURLからアイコンを取得できませんでした。",deleteTitle:"プロバイダーを削除",deleteMessage:'"{{name}}"を削除しますか？リンクされたすべてのユーザーアカウントが切断されます。',form:{name:"表示名",issuerUrl:"発行者URL",clientId:"クライアントID",clientSecret:"クライアントシークレット",scopes:"スコープ",iconUrl:"アイコンURL (任意)",enabled:"有効",autoCreate:"ユーザーを自動作成",autoCreateDesc:"初回ログイン時にローカルアカウントを自動的に作成します。",autoLink:"既存アカウントを自動リンク",autoLinkDesc:"初回ログイン時にメールアドレスで既存のローカルアカウントにリンクします。",secretHint:"空白のままで現在のものを維持",secretPlaceholder:"新しいシークレット",emailClaim:"メールクレーム",emailClaimDesc:"メールIDとして使用するJWTクレーム。Azure Entra IDには'preferred_username'または'upn'を使用（email_verifiedを送信しない）。信頼できるクレーム名のみ使用してください。",emailClaimPlaceholder:"メール",emailClaimCustomClaimAutoLinkWarning:"カスタムクレームは、値がテナント管理されている場合（Azure Entra IDのupn / preferred_usernameなど）にのみ自動リンクに安全です。IdPがユーザーにこのクレームの自己宣言を許可している場合は、自動リンクを有効にしないでください。",requireEmailVerified:"メール確認を要求",requireEmailVerifiedDesc:"プロバイダーが確認済みとしてマークした場合にのみメールクレームを受け入れます。",requireEmailVerifiedWarning:"警告：確認なしでメールが受け入れられます。信頼できるプロバイダーのみで使用してください。",requireEmailVerifiedAutoLink:"この設定を変更するには、まず自動リンクを無効にしてください。",defaultGroup:"デフォルトグループ",defaultGroupDesc:"自動作成ユーザーに割り当てられるグループ。未設定の場合はViewersにフォールバックします。",defaultGroupViewersFallback:"Viewers（デフォルト）"}},encryption:{title:"MFA暗号化ステータス",enabledFromEnv:"保存時の暗号化が有効（MFA_ENCRYPTION_KEY環境変数のキー）",enabledFromFile:"保存時の暗号化が有効（データディレクトリから読み込んだキー）",enabledGenerated:"保存時の暗号化が自動生成キーで有効",notConfigured:"保存時の暗号化が設定されていません",notConfiguredDesc:"TOTPシークレットとOIDCのclient_secretsは平文で保存されています。MFA_ENCRYPTION_KEYを設定するか、書き込み可能なデータディレクトリでBambuddyを再起動して自動生成してください。",allEncrypted:"すべてのMFAシークレットは保存時に暗号化されています。",legacyRowsLabel:"レガシー平文行",encryptedRowsLabel:"暗号化された行",legacyRowsWarning:"{{count}}件のレガシー平文行を検出。OIDCプロバイダーを再保存するか、ユーザーの認証アプリを再登録して暗号化ストレージへ移行してください。",backupHint:"自動生成キーは DATA_DIR/.mfa_encryption_key に保存され、ローカルバックアップZIPに含まれます。バックアップを安全に保管するか、MFA_ENCRYPTION_KEYを明示的に設定してください。",decryptionBrokenTitle:"暗号化キーが見つかりません",decryptionBrokenError:"{{count}}件の暗号化レコードを復号できません。暗号化キーが見つかりません。以前のMFA_ENCRYPTION_KEYまたはDATA_DIR/.mfa_encryption_keyを復元してください。",migrationErrorWarning:"{{count}} 件のレガシー行を起動時に再暗号化できませんでした。サーバーログを確認し、Bambuddy を再起動して再試行してください。"}},notification:{printStarted:{title:"印刷開始",body:"{{printer}}: {{filename}} の印刷を開始しました"},printCompleted:{title:"印刷完了",body:"{{printer}}: {{filename}} が正常に完了しました"},printFailed:{title:"印刷失敗",body:"{{printer}}: {{filename}} が失敗しました"},printStopped:{title:"印刷中止",body:"{{printer}}: {{filename}} が中止されました"},printProgress:{title:"印刷進捗",body:"{{printer}}: {{filename}} は {{percent}}% 完了"},printerOffline:{title:"プリンターオフライン",body:"{{printer}} がオフラインです"},printerError:{title:"プリンターエラー",body:"{{printer}} – {{error}}"},filamentLow:{title:"フィラメント残量低下",body:"{{printer}}: フィラメントが残りわずかです"},maintenanceDue:{title:"メンテナンス期限",body:"{{printer}}: {{items}} の対応が必要です"}},errors:{generic:"問題が発生しました",networkError:"ネットワークエラーです。接続を確認してください。",notFound:"見つかりません",unauthorized:"認証エラー",serverError:"サーバーエラー",validationError:"入力内容を確認してください",printerConnectionFailed:"プリンターへの接続に失敗しました",saveFailed:"保存に失敗しました",deleteFailed:"削除に失敗しました",loadFailed:"データの読み込みに失敗しました"},hmsErrors:{title:"エラー - {{name}}",noErrors:"エラーなし",viewOnWiki:"Bambu Lab Wikiで表示",clearInstructions:"プリンターでエラーをクリアするとここからも消えます。",clearErrors:"エラーをクリア",clearSuccess:"HMSエラーをクリアしました",clearFailed:"HMSエラーのクリアに失敗しました"},mqttDebug:{title:"MQTTデバッグログ",searchPlaceholder:"トピックまたはペイロードで検索...",noMessages:"まだメッセージが記録されていません",startLoggingHint:"「ログ開始」をクリックしてMQTTメッセージのキャプチャを開始",noMessagesMatch:"フィルターに一致するメッセージがありません",adjustFilterHint:"検索条件やフィルター条件を調整してみてください",incoming:"受信",outgoing:"送信",loggingStopped:"ログ記録停止",loggingActive:"ログ記録中 - メッセージは自動更新されます",startLogging:"ログ記録を開始",stopLogging:"ログ停止",clearLog:"ログをクリア",topic:"トピック",timestamp:"タイムスタンプ",direction:"方向",all:"すべて"},printerFiles:{title:"ファイル管理",storageUsed:"使用中:",storageFree:"空き:",filterPlaceholder:"ファイルを検索...",deleteButton:"削除",deleteFiles:"{{count}}件のファイルを削除",deleteFileConfirm:'"{{name}}" を削除しますか？この操作は取り消せません。',deleteFilesConfirm:"選択した{{count}}件のファイルを削除しますか？元に戻せません。",noFiles:"このディレクトリにファイルがありません",loadingFiles:"ファイルを読み込み中...",failedToLoad:"ファイルの読み込みに失敗しました",toast:{filesDeleted:"{{count}}件のファイルを削除しました",deleteFailed:"削除に失敗: {{error}}"}},confirm:{delete:"削除しますか？",unsavedChanges:"保存されていない変更があります。このページを離れますか？",clearQueue:"キューをクリアしますか？"},login:{title:"Bambuddy ログイン",subtitle:"アカウントにサインイン",username:"ユーザー名",usernamePlaceholder:"ユーザー名を入力",usernameOrEmail:"ユーザー名またはメール",usernameOrEmailPlaceholder:"ユーザー名または @ メール",password:"パスワード",passwordPlaceholder:"パスワードを入力",signIn:"サインイン",signingIn:"ログイン中...",rememberMe:"ログイン状態を保持する",forgotPassword:"パスワードをお忘れですか？",loginSuccess:"ログインしました",loginFailed:"ログインに失敗しました",enterCredentials:"ユーザー名とパスワードを入力してください",enterEmail:"メールアドレスを入力してください",oidcLoginFailed:"OIDCログインに失敗しました",oidcErrors:{providerError:"IDプロバイダーがエラーを返しました",missingParameters:"OIDCコールバックに必須パラメーターがありません",invalidState:"OIDCの状態が無効か、すでに使用されています",stateExpired:"OIDCログインセッションが期限切れです。もう一度お試しください",providerNotFound:"OIDCプロバイダーが見つかりません",discoveryFailed:"OIDCディスカバリードキュメントの取得に失敗しました",invalidDiscovery:"OIDCディスカバリードキュメントが無効です",networkError:"OIDCトークン交換中にネットワークエラーが発生しました",badResponse:"OIDCトークン交換中に予期しない応答を受信しました",noIdToken:"OIDCプロバイダーがIDトークンを返しませんでした",validationFailed:"OIDCトークンの検証に失敗しました",nonceMismatch:"OIDCノンスが一致しません。リプレイ攻撃の可能性があります",missingSubClaim:"OIDCトークンにsubクレームがありません",noLinkedAccount:"このOIDCアイデンティティに関連付けられたローカルアカウントがありません",accountInactive:"あなたのアカウントは無効です",userResolutionFailed:"アカウントを解決できませんでした",internalError:"OIDCログイン中に内部エラーが発生しました",tokenExchangeFailed:"OIDCトークン交換に失敗しました"},forgotPasswordTitle:"パスワードを忘れた場合",forgotPasswordMessage:"パスワードを忘れた場合は、システム管理者に連絡してリセットしてもらってください。",forgotPasswordEmailMessage:"メールアドレスを入力すると、新しいパスワードを送信します。",emailAddress:"メールアドレス",emailPlaceholder:"your.email@example.com",cancel:"キャンセル",sending:"送信中...",sendResetEmail:"リセットメールを送信",howToReset:"パスワードのリセット方法：",resetStep1:"Bambuddy管理者に連絡",resetStep2:"ユーザー管理でパスワードリセットを依頼",resetStep3:"管理者が新しい仮パスワードを設定",resetStep4:"新しいパスワードでログインし、設定で変更",gotIt:"了解",twoFA:{title:"二段階認証",subtitle:"アカウントは二段階認証で保護されています。確認コードを入力してください。",methodAuthenticator:"認証アプリ",methodEmail:"メール認証",methodBackup:"バックアップコード",instructionsTotp:"認証アプリを開いて、Bambuddy用の6桁のコードを入力してください。",instructionsEmail:"6桁の確認コードをメールアドレスに送信しました。有効期限は10分です。",instructionsEmailNotSent:"下のボタンをクリックして、メールで確認コードを受け取ってください。",instructionsBackup:"8文字のバックアップコードをいずれか1つ入力してください。各コードは1回のみ使用可能です。",sendCodeButton:"メールでコードを送信する",sendingCode:"送信中...",resendCode:"コードを再送する",codeLabel:"確認コード",backupCodeLabel:"バックアップコード",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"確認する",verifyingButton:"確認中...",backToLogin:"← ログイン画面に戻る",orContinueWith:"または以下でログイン",signInWith:"{{provider}}でログイン",enterCode:"確認コードを入力してください",sendCodeFailed:"確認コードの送信に失敗しました",invalidCode:"無効なコードです。もう一度お試しください。"},resetPassword:{title:"新しいパスワードを設定",subtitle:"下のフィールドに新しいパスワードを入力して確認してください。",newPassword:"新しいパスワード",newPasswordPlaceholder:"8文字以上",confirmPassword:"パスワードの確認",confirmPasswordPlaceholder:"新しいパスワードを再入力",saving:"保存中…",submit:"新しいパスワードを設定",backToLogin:"ログインに戻る",passwordsDoNotMatch:"パスワードが一致しません",passwordTooShort:"パスワードは8文字以上で入力してください",resetFailed:"パスワードのリセットに失敗しました。リンクが期限切れの可能性があります。"}},setup:{title:"Bambuddy セットアップ",subtitle:"Bambuddyインスタンスの認証を設定",enableAuth:"認証を有効化",adminAccount:"管理者アカウント",adminAccountDesc:"既に管理者ユーザーが存在する場合、既存の管理者アカウントを使用して認証が有効化されます。既存の管理者を使用する場合は下のフィールドを空のままにするか、新しい認証情報を入力して新しい管理者ユーザーを作成してください。",adminUsername:"管理者ユーザー名",adminPassword:"管理者パスワード",optionalIfAdminExists:"（管理者ユーザーが存在する場合は任意）",adminUsernamePlaceholder:"管理者ユーザー名を入力（任意）",adminPasswordPlaceholder:"管理者パスワードを入力（任意）",confirmPassword:"パスワードの確認",confirmPasswordPlaceholder:"パスワードを確認",settingUp:"セットアップ中...",completeSetup:"セットアップを完了",toast:{authEnabledAdminCreated:"認証が有効になり、管理者ユーザーが作成されました",authEnabledExistingAdmins:"既存の管理者ユーザーを使用して認証が有効になりました",setupCompleted:"セットアップが完了しました",enterBothCredentials:"管理者のユーザー名とパスワードの両方を入力するか、既存の管理者を使用する場合は両方を空にしてください",passwordsDoNotMatch:"パスワードが一致しません",passwordTooShort:"パスワードは6文字以上必要です"}},changePassword:{title:"パスワードを変更",currentPassword:"現在のパスワード",currentPasswordPlaceholder:"現在のパスワードを入力",newPassword:"新しいパスワード",newPasswordPlaceholder:"新しいパスワードを入力（6文字以上）",confirmPassword:"新しいパスワード確認",confirmPasswordPlaceholder:"パスワードを確認",passwordsDoNotMatch:"パスワードが一致しません",passwordTooShort:"パスワードは6文字以上必要です",changing:"変更中...",success:"パスワードを変更しました",failed:"パスワードの変更に失敗しました"},plateAlert:{title:"印刷が一時停止されました！",message:"ビルドプレート上にオブジェクトが検出されました。印刷が自動的に一時停止されました。プレートをクリアして印刷を再開してください。",understand:"了解"},camera:{title:"カメラビュー",invalidPrinterId:"無効なプリンターID",live:"ライブ",snapshot:"スナップショット",restartStream:"ストリームを再開",refreshSnapshot:"スナップショットを更新",fullscreen:"フルスクリーン",exitFullscreen:"フルスクリーンを終了",connectingToCamera:"カメラに接続中...",capturingSnapshot:"スナップショットを撮影中...",connectionLost:"接続が切断されました",connectionFailed:"カメラ接続に失敗しました",reconnecting:"{{countdown}}秒後に再接続... (試行 {{attempt}}/{{max}})",reconnectNow:"今すぐ再接続",cameraUnavailable:"カメラが利用できません",cameraUnavailableDesc:"プリンターの電源がオンで接続されていることを確認してください。",noCamera:"カメラがありません",retry:"再試行",cameraStream:"カメラストリーム",zoomOut:"ズームアウト",zoomIn:"ズームイン",resetZoom:"ズームをリセット",recording:"録画中",startRecording:"録画開始",stopRecording:"録画停止",chamberLight:"チャンバーライト切替",unavailable:"カメラは利用できません",diagnose:{button:"診断",modalTitle:"カメラ診断",running:"診断を実行中...",runFailed:"診断を実行できませんでした: {{error}}",retry:"再実行",stage:{tcp_reachable:"ネットワーク到達性",first_frame:"フレーム取得",live_stream_active:"ライブストリーム動作中"},summary:{all_ok:"カメラは正常に動作しています。診断のすべての段階が成功しました。",live_stream_active_healthy:"カメラは現在新しいフレームを配信しています — テストは不要です。",printer_unreachable:"プリンターに到達できません。IPアドレス、ネットワーク接続、プリンターの電源が入っていることを確認してください。",camera_port_closed:"プリンターには到達できますが、カメラポートが閉じています。プリンター設定でLANのみモードと開発者モードが有効になっていることを確認してください。",no_frame:"カメラに接続できましたがフレームを受信できませんでした。再試行するか、プリンター設定でカメラが有効になっていることを確認してください。",unknown_failure:"カメラ診断が不明な理由で失敗しました。詳細はサポートログを確認してください。"},meta:{protocol:"プロトコル",port:"ポート",profile:"プロファイル"}}},groups:{title:"グループ管理",subtitle:"アクセス制御の権限グループを管理",backToSettings:"設定に戻る",createGroup:"グループを作成",noPermission:"このページにアクセスする権限がありません。",system:"システム",noDescription:"説明なし",usersCount:"{{count}}人のユーザー",permissionsCount:"{{count}}個の権限",edit:"編集",delete:"削除",toast:{created:"グループを作成しました",updated:"グループを更新しました",deleted:"アーカイブを削除しました",enterGroupName:"グループ名を入力"},modal:{editGroup:"グループを編集",createGroup:"グループを作成",cancel:"キャンセル",saving:"保存中...",creating:"作成中...",saveChanges:"変更を保存"},form:{groupName:"グループ名",groupNamePlaceholder:"グループ名を入力",systemGroupWarning:"システムグループ名は変更できません",description:"説明",descriptionPlaceholder:"説明を入力（任意）",permissions:"権限 ({{count}} 選択中)"},deleteModal:{title:"グループを削除",message:"このグループを削除しますか？このグループのユーザーはこれらの権限を失います。",confirm:"確認"},editor:{title:"グループを編集",createTitle:"グループを作成",search:"権限を検索...",selectAll:"すべて選択",clearAll:"すべて解除",permissionsSelected:"{{count}}件選択",noResults:"検索に一致する権限がありません"}},users:{title:"ユーザー管理",subtitle:"ユーザーとBambuddyインスタンスへのアクセスを管理",backToSettings:"設定に戻る",createUser:"ユーザーを作成",noPermission:"このページにアクセスする権限がありません。",admin:"管理者",noGroups:"グループなし",active:"アクティブ",inactive:"非アクティブ",edit:"編集",delete:"削除",system:"システム",noGroupsAvailable:"利用可能なグループがありません",table:{username:"ユーザー名",groups:"グループ",status:"ステータス",actions:"アクション"},toast:{created:"ユーザーを作成しました",updated:"ユーザーを更新しました",deleted:"アーカイブを削除しました",fillRequired:"必須項目をすべて入力してください",passwordsDoNotMatch:"パスワードが一致しません",passwordTooShort:"パスワードは6文字以上必要です",ldapProvisioned:"LDAPユーザー「{{username}}」をプロビジョニング"},modal:{createUser:"ユーザーを作成",editUser:"ユーザーを編集",cancel:"キャンセル",creating:"作成中...",saving:"保存中...",saveChanges:"変更を保存",advancedAuthSubtitle:"高度な認証を使用",tabsAriaLabel:"ユーザーソース",localTab:"ローカル",ldapTab:"LDAP",ldapSearchLabel:"ディレクトリを検索",ldapSearchPlaceholder:"ユーザー名、名前、またはメールアドレスを入力...",ldapMinChars:"検索するには2文字以上入力してください",ldapTypeToSearch:"LDAPディレクトリを検索するには入力を開始",ldapSearching:"ディレクトリを検索中...",ldapNoResults:"ディレクトリに一致するユーザーがいません",ldapSearchError:"ディレクトリ検索に失敗。LDAPサーバーの状態を確認してください。",ldapAlreadyProvisioned:"プロビジョニング済み",ldapSelectedLabel:"選択中",ldapProvision:"ユーザーをプロビジョニング",ldapProvisioning:"プロビジョニング中...",ldapErrorProvision:"プロビジョニングに失敗。LDAPサーバーの状態を確認して再試行してください。"},form:{username:"ユーザー名",usernamePlaceholder:"ユーザー名を入力",email:"メール",emailPlaceholder:"user@example.com",password:"パスワード",passwordPlaceholder:"パスワードを入力",confirmPassword:"パスワードの確認",confirmPasswordPlaceholder:"パスワードを確認",newPasswordPlaceholder:"新しいパスワードを入力",confirmNewPasswordPlaceholder:"新しいパスワードを確認",leaveBlankToKeep:"（現在のパスワードを維持する場合は空白）",groups:"グループ",optional:"オプション",autoGeneratedPassword:"安全なパスワードが自動的に生成され、ユーザーにメールで送信されます。",passwordManagedByAdvancedAuth:"パスワードは高度な認証によって管理されています。「パスワードのリセット」を使用して、メールで新しいパスワードをユーザーに送信してください。",resetPassword:"パスワードのリセット",resettingPassword:"パスワードをリセット中..."},deleteModal:{title:"ユーザーを削除",message:"このユーザーを削除してもよろしいですか？この操作は元に戻せません。",confirm:"ユーザーを削除"}},streamOverlay:{title:"ストリームオーバーレイ",invalidPrinterId:"無効なプリンターID",cameraStream:"カメラストリーム",progress:"進捗",eta:"残り時間",printerIdle:"プリンター待機中",printerOffline:"プリンターオフライン",status:{printing:"印刷中",paused:"一時停止",finished:"完了",failed:"失敗",idle:"待機中",unknown:"不明"}},profiles:{title:"フィラメントプロファイル",subtitle:"スライサープリセットと圧力キャリブレーションの管理",tabs:{bambuCloud:"Bambu Cloud",orcaCloud:"Orca Cloud",local:"ローカルプロファイル",kprofiles:"Kプロファイル"},orcaCloud:{connectedAs:"接続中",logout:"切断",noLogoutPermission:"切断する権限がありません",noConnectPermission:"Orca Cloudに接続する権限がありません",retry:"再試行",back:"別のサインイン方法を使用",connect:{title:"Orca Cloudに接続",description:"Orca Cloudアカウントにサインインして、スライサープロファイルをBambuddyに同期します。"},providers:{google:"Googleでサインイン",apple:"Appleでサインイン",github:"GitHubでサインイン",email:"メールとパスワードでサインイン"},password:{title:"メールとパスワードでサインイン",email:"メールアドレス",emailPlaceholder:"you@example.com",password:"パスワード",submit:"サインイン"},paste:{title:"サインインを完了",step1:"Orca Cloudのサインインページが新しいタブで開きました。Orcaアカウントでサインインしてください。",step2:"ブラウザは「localhost」のURLにリダイレクトされ、読み込みに失敗します。それは想定通りです — そのURLが必要です。",step3:"ブラウザのアドレスバーからURL全体をコピーして、下に貼り付けてください。",signInUrl:"サインインタブが開かなかった場合は、このURLをクリックしてください:",label:"コールバックURLをここに貼り付け",placeholder:"http://localhost:41172/callback?code=...&state=...",submit:"接続を完了"},profiles:{title:"Orca Cloudプロファイル ({{count}})",refresh:"更新",empty:"Orca Cloudアカウントにまだプロファイルがありません。"},toast:{connected:"{{email}}としてOrca Cloudに接続しました",disconnected:"Orca Cloudから切断しました"},errors:{startFailed:"Orca Cloudのサインインを開始できませんでした。",finishFailed:"Orca Cloudのサインインを完了できませんでした。",passwordFailed:"そのメールとパスワードでサインインできませんでした。",passwordEmpty:"メールアドレスとパスワードの両方を入力してください。",emptyPaste:"ブラウザからコールバックURLを貼り付けてください。",noCode:"このURLはOrca Cloudのコールバックではないようです (codeパラメータがありません)。アドレスバーから完全なURLをコピーしてください。"}},localProfiles:{title:"ローカルプロファイル",subtitle:"OrcaSlicerからスライサープリセットをインポート・管理",import:"プロファイルをインポート",importDesc:".bbscfg、.bbsflmt、.orca_filament、.zip、.jsonファイルをここにドロップ",importing:"インポート中...",search:"ローカルプリセットを検索...",noPresets:"ローカルプリセットがまだありません",noSearchResults:"検索に一致するプリセットがありません",badge:"ローカル",edit:"編集",delete:"削除",cancel:"キャンセル",deleteConfirmTitle:"プリセットを削除",deleteConfirm:"このプリセットを削除してもよろしいですか？元に戻せません。",source:"ソース",inheritsFrom:"継承元",filamentType:"タイプ",vendor:"メーカー",compatiblePrinters:"プリンター",nozzleTemp:"ノズル温度",cost:"コスト",density:"密度",pressureAdvance:"プレッシャーアドバンス",filament:"フィラメント",process:"プロセス",printer:"プリンター",toast:{importSuccess:"{{count}}件のプリセットをインポートしました",importSkipped:"{{count}}件のプリセットをスキップしました（重複）",importError:"インポート中に{{count}}件のエラーが発生しました",deleted:"プリセットを削除しました",updated:"プリセットを更新しました"}},connectedAs:"接続中:",logout:"ログアウト",noLogoutPermission:"ログアウトする権限がありません",failedToLoad:"ファイルの読み込みに失敗しました",retry:"リトライ",time:{justNow:"たった今",minsAgo:"{{count}}分前",hoursAgo:"{{count}}時間前",daysAgo:"{{count}}日前"},toast:{loggedOut:"ログアウトしました"},login:{title:"Bambuddy ログイン",subtitle:"アカウントにサインイン",email:"メールアドレス",password:"パスワード",region:"リージョン",regionGlobal:"グローバル",regionChina:"中国",verificationCode:"認証コード",totpCode:"認証アプリコード",checkEmail:"メール ({{email}}) に届いた6桁のコードを入力してください",enterTotpHint:"認証アプリの6桁のコードを入力してください",accessToken:"アクセストークン",accessTokenHint:"Bambu Cloud のアクセストークンを貼り付けてください。中国リージョンのアカウントはこの方法のみ利用可能です（電話番号認証のためメールログイン不可）。トークンの取得方法は MakerWorld の Cookie から（Wiki を参照）。",back:"戻る",loginButton:"ログイン",verifyButton:"認証",setTokenButton:"トークンを設定",useToken:"アクセストークンを使用",useEmail:"メールでログイン",toast:{loggedIn:"ログインしました",codeSent:"メールに認証コードを送信しました",enterTotp:"認証アプリのコードを入力してください",tokenSet:"トークンを設定しました"}},presets:{myPreset:"マイプリセット（編集可能）",duplicate:"複製",editable:"編集可能",failedToLoadDetails:"プリセットの詳細を読み込めませんでした",deleteConfirm:"このプロファイルを削除しますか？",deleteWarning:"「{{name}}」をBambu Cloudから完全に削除します。元に戻せません。",noDuplicatePermission:"プリセットを複製する権限がありません",noEditPermission:"プリセットを編集する権限がありません",noDeletePermission:"プロジェクトを削除する権限がありません",types:{filament:"フィラメント",printer:"プリンター",process:"プロセス"},toast:{deleted:"アーカイブを削除しました",created:"プリセットを作成しました",updated:"プリセットを更新しました",duplicated:"プリセットを複製しました",fieldAdded:'フィールド "{{key}}" を追加しました',exported:"プリセットをエクスポートしました"},baseLabel:"ベース: {{name}}",currentLabel:"現在: {{name}}",newPreset:"新規プリセット",editPreset:"プリセットを編集",duplicatePreset:"プリセットを複製",createNewPreset:"新しいプリセットを作成",customizeSettings:"新しいプリセットの設定をカスタマイズ",compareWithBase:"ベースプリセットと比較",compare:"比較",basePreset:"ベースプリセット",selectBasePreset:"ベースプリセットを選択...",presetName:"プリセット名",myCustomPreset:"カスタムプリセット",inheritsFrom:"継承元:",dropJsonToImport:"JSONファイルをドロップしてインポート",tabs:{common:"一般",allFields:"すべてのフィールド"},availableFields:"利用可能なフィールド",searchFieldsPlaceholder:"フィールドを検索...",noMatchingFields:"一致するフィールドがありません",allFieldsAdded:"すべてのフィールドが追加済みです",addCustomField:"カスタムフィールドを追加",yourOverrides:"オーバーライド一覧",noOverridesYet:"オーバーライドはまだありません",clickFieldsToAdd:"左のフィールドをクリックして追加",saveAsTemplate:"テンプレートとして保存",jsonTip:"ヒント: .jsonファイルをこのモーダルにドラッグ＆ドロップして設定をインポート"},cloudView:{searchPlaceholder:"プリセットを検索...",templates:"テンプレート",refresh:"更新",newPreset:"新規プリセット",clearFilters:"フィルターをクリア",compareMode:"比較モード",selectAnotherPreset:"同じタイプ（{{type}}）の別のプリセットを選択",clickTwoPresets:"同じタイプのプリセットを2つクリックして比較",selectFirst:"1. 最初を選択",selectSecond:"2. 2番目を選択",compareNow:"比較を実行",lastSynced:"最終同期:",showingCount:"{{total}} 件中 {{showing}} 件のプリセットを表示",noPresetsFound:"プリセットが見つかりません",columns:{filament:"フィラメント",process:"プロセス",printer:"プリンター"},noFilamentPresets:"フィラメントプリセットなし",noProcessPresets:"プロセスプリセットなし",noPrinterPresets:"プリンタープリセットなし",filters:{type:"種類",owner:"所有者",printer:"プリンター",nozzle:"ノズル",filament:"フィラメント",layer:"レイヤー",all:"すべて",myPresets:"マイプリセット",builtIn:"ビルトイン",process:"プロセス"},noTemplatesPermission:"テンプレートを管理する権限がありません",noRefreshPermission:"プロファイルを更新する権限がありません",noCreatePermission:"プロジェクトを作成する権限がありません"},templates:{title:"フィラメントプロファイル",noTemplates:"テンプレートがありません。バックエンドを再起動してデフォルトテンプレートを作成してください。",createFirst:"プリセットエディタからテンプレートを作成",typeFilter:"タイプ:",deleteTitle:"テンプレートを削除",deleteWarning:"この操作は元に戻せません",deleteConfirm:'"{{name}}" を削除しますか？',namePlaceholder:"テンプレート名",descriptionPlaceholder:"説明",settingsJson:"設定 (JSON)",fieldsCount:"{{count}}フィールド",shownInModals:"モーダルに表示",hiddenInModals:"モーダルで非表示",apply:"適用",toast:{deleted:"アーカイブを削除しました",updated:"テンプレートを更新しました",created:"テンプレートを作成しました",applied:"テンプレートを適用しました"}}},support:{debugLoggingActive:"デバッグログが有効です",manageLogs:"管理",collectItem7:"プリンター接続状態とファームウェアバージョン",collectItem8:"連携状態（Spoolman、MQTT、HA）",collectItem9:"ネットワークインターフェース（サブネットのみ）",collectItem10:"Pythonパッケージバージョン",collectItem11:"データベース健全性チェック",collectItem12:"Docker環境の詳細",bundleGenerating:"バンドルを生成中...",bundleStepConnection:"プリンターの接続確認を実行中",bundleStepVirtualPrinters:"仮想プリンターのセットアップ確認を実行中",bundleStepLogScan:"最近のログから既知の問題をスキャン中",bundleStepBuild:"サポートバンドル ZIP を作成中"},fileManager:{title:"ファイル管理",subtitle:"印刷ファイルの整理と管理",uploadFiles:"ファイルをアップロード",newFolder:"新しいフォルダ",folderName:"フォルダ名",folderNamePlaceholder:"例: 機能パーツ",renameFile:"ファイル名を変更",renameFolder:"フォルダ名を変更",invalidFilenameChar:'印刷ファイル名に "{{char}}" は使用できません。プリンターのSDカードは次の文字を拒否します: < > : " / \\ | ? *',moveFiles:"{{count}}件のファイルを移動",rootNoFolder:"ルート（フォルダなし）",current:"（現在）",linkFolder:"フォルダをリンク",linkFolderDescription:"「{{name}}」をプロジェクトまたはアーカイブにリンクしてすばやくアクセス。",project:"プロジェクト",archive:"アーカイブ",noProjectsFound:"プロジェクトが見つかりません",noArchivesFound:"アーカイブが見つかりません",unlink:"リンク解除",link:"リンク",dragDropFiles:"ファイルをここにドラッグ＆ドロップ",dropFilesHere:"ここにファイルをドロップ",orClickToBrowse:"またはクリックして選択",allFileTypesSupported:"すべてのファイルタイプに対応。ZIPファイルは展開されます。",zipFilesDetected:"ZIPファイルを検出",zipExtractOptions:"ZIPファイルは展開されます。フォルダー構造の処理方法を選択：",preserveZipStructure:"ZIPのフォルダ構造を保持",createFolderFromZip:"ZIPファイル名からフォルダーを作成",stlThumbnailGeneration:"STLサムネイル生成",zipMayContainStl:"ZIPファイルにSTLファイルが含まれている場合があります。展開時にサムネイルを生成できます。",thumbnailsCanBeGenerated:"STLファイルのサムネイルを生成できます。大きなモデルは処理に時間がかかる場合があります。",generateThumbnailsForStl:"STLファイルのサムネイルを生成",threemfDetected:"3MFファイルを検出",threemfExtractionInfo:"プリンターモデル、素材、色、印刷設定は3MFファイルから自動的に抽出されます。",willBeExtracted:"• 展開予定",filesExtracted:"• {{count}}個のファイルを展開済み",uploadComplete:"アップロード完了: {{succeeded}} 件成功",uploadFailed:"アップロード失敗",zipFilesFailed:"{{count}}個のファイルが失敗",uploading:"アップロード中...",changeLink:"リンクを変更...",linkTo:"リンク先...",linkToProjectOrArchive:"プロジェクトまたはアーカイブにリンク",addToQueue:"キューに追加",schedulePrint:"印刷をスケジュール",generateThumbnail:"サムネイルを生成",generateThumbnails:"サムネイルを生成",generateThumbnailsForMissing:"サムネイルのないSTLファイルのサムネイルを生成",gridView:"グリッド表示",listView:"リスト表示",lowDiskSpaceWarning:"ディスク容量不足の警告",lowDiskSpaceDetails:"{{total}}中{{free}}の空き容量のみ。しきい値は設定で{{threshold}}GBに設定されています。",files:"ファイル",folders:"フォルダ",size:"サイズ",free:"空き:",allFiles:"すべてのファイル",allExternal:"外部",externalIsEmpty:"外部ファイルはありません",externalEmptyDescription:"リンクされた外部フォルダ内のファイルがここに表示されます。",wrap:"折り返し",enableTextWrapping:"テキスト折り返しを有効化",disableTextWrapping:"テキスト折り返しを無効化",collapse:"折りたたむ",collapseFoldersByDefault:"フォルダをデフォルトで折りたたむ",expandFoldersByDefault:"フォルダをデフォルトで展開する",dragToResizeTooltip:"ドラッグしてリサイズ、ダブルクリックでリセット",searchFiles:"ファイルを検索...",allTypes:"すべての種類",prints:"印刷回数",ascending:"昇順",descending:"降順",resultsCount:"{{total}}件中{{showing}}件",selectAll:"すべて選択",deselectAll:"すべて選択解除",selected:"{{count}}件選択中",adding:"追加中...",loadingFiles:"ファイルを読み込み中...",folderIsEmpty:"フォルダーは空です",noFilesYet:"ファイルはまだありません",folderEmptyDescription:"ファイルをアップロードするか、このフォルダーにファイルを移動して開始しましょう。",noFilesDescription:"印刷関連ファイルの整理を始めるにはファイルをアップロードしてください。",noMatchingFiles:"一致するファイルがありません",noMatchingFilesDescription:"現在の検索またはフィルター条件に一致するファイルがありません。",clearFilters:"フィルターをクリア",printedCount:"{{count}}回印刷済み",uploadedBy:"アップロード者",deleteFolder:"フォルダを削除",deleteFile:"ファイルを削除",deleteFilesCount:"{{count}}件のファイルを削除",deleteFolderConfirm:"このフォルダを削除しますか？中のファイルもすべて削除されます。",deleteFileConfirm:"このファイルを削除しますか？",deleteFilesConfirm:"選択した{{count}}件のファイルを削除しますか？この操作は元に戻せません。",deleting:"削除中...",noPermissionRenameFolder:"フォルダー名を変更する権限がありません",noPermissionLinkFolder:"フォルダーをリンクする権限がありません",noPermissionDeleteFolder:"フォルダーを削除する権限がありません",noPermissionPrint:"印刷する権限がありません",noPermissionSlice:"ファイルをスライスする権限がありません",noPermissionAddToQueue:"キューに追加する権限がありません",noPermissionDownload:"ファイルをダウンロードする権限がありません",noPermissionRenameFile:"このファイル名を変更する権限がありません",noPermissionGenerateThumbnail:"サムネイルを生成する権限がありません",noPermissionDeleteFile:"このファイルを削除する権限がありません",noPermissionCreateFolder:"フォルダーを作成する権限がありません",noPermissionUpload:"ファイルをアップロードする権限がありません",noPermissionMoveFiles:"ファイルを移動する権限がありません",noPermissionDeleteFiles:"ファイルを削除する権限がありません",linkExternal:"外部リンク",linkExternalFolder:"外部フォルダをリンク",linkExternalFolderDescription:"ホストディレクトリ（NAS、USB、ネットワーク共有）をファイルマネージャにマウントします。ファイルはコピーされず、元のパスから直接アクセスされます。",externalFolderNamePlaceholder:"例：NASプリント",externalPath:"ホストパス",externalPathHelp:"Dockerホスト上のディレクトリの絶対パス。コンテナにバインドマウントされている必要があります。",readOnly:"読み取り専用",readOnlyHelp:"アップロードと削除を防止",showHiddenFiles:"隠しファイルを表示（ドットファイル）",externalFolder:"外部フォルダ",scanFolder:"スキャン",toast:{folderCreated:"フォルダを作成しました",folderDeleted:"フォルダを削除しました",fileDeleted:"ファイルを削除しました",filesDeleted:"{{count}}件のファイルを削除しました",filesMoved:"ファイルを移動しました",folderLinked:"フォルダをリンクしました",folderUnlinked:"フォルダのリンクを解除しました",externalFolderLinked:"外部フォルダがリンクされスキャンされました",folderScanned:"スキャン完了：{{added}}件追加、{{removed}}件削除",addedToQueue:"{{count}}個のファイルをキューに追加しました",addedToQueuePartial:"{{added}}件追加、{{failed}}件失敗",failedToAddToQueue:"ファイルの追加に失敗: {{error}}",fileRenamed:"ファイル名を変更しました",folderRenamed:"フォルダ名を変更しました",thumbnailsGenerated:"{{count}}件のサムネイルを生成しました",thumbnailsGeneratedPartial:"{{succeeded}}件生成、{{failed}}件失敗",noStlMissingThumbnails:"サムネイルのないSTLファイルはありません",failedToGenerateThumbnails:"サムネイルの生成に失敗: {{error}}",thumbnailGenerated:"サムネイルを生成しました",failedToGenerateThumbnail:"サムネイルの生成に失敗: {{error}}"}},projects:{title:"プロジェクト",subtitle:"印刷プロジェクトを管理",newProject:"新規プロジェクト",editProject:"プロジェクトを編集",deleteProject:"プロジェクトを削除",projectName:"プロジェクト名",description:"説明",noProjects:"プロジェクトはまだありません",noProjectsFiltered:"{{status}}のプロジェクトはありません",noProjectsFilteredHelp:"{{status}}のプロジェクトがありません。ステータスが変更されるとここに表示されます。",createFirst:"最初のプロジェクトを作成して、関連する印刷の整理、進捗管理、ビルドの管理を始めましょう。",createFirstButton:"最初のプロジェクトを作成",create:"作成",files:"ファイル",prints:"印刷",plates:"プレート",parts:"パーツ",lastModified:"最終更新日",deleteConfirm:"このプロジェクトを削除しますか？アーカイブとキューアイテムはリンク解除されますが、削除されません。",addFiles:"ファイルを追加",removeFile:"ファイルを削除",viewDetails:"詳細を表示",namePlaceholder:"プロジェクト名",descriptionPlaceholder:"プロジェクトの説明（任意）",urlLabel:"URL",urlPlaceholder:"https://makerworld.com/...",urlInvalid:"URLはhttp://またはhttps://で始まる必要があります",openExternalUrl:"プロジェクトのURLを開く",coverImageLabel:"カバー画像",coverImageAlt:"プロジェクトのカバー画像",coverImageUpload:"アップロード",coverImageReplace:"置き換える",coverImageRemove:"削除",color:"色",targetPlates:"目標プレート数",targetPlatesPlaceholder:"例: 10",targetPlatesHelp:"印刷ジョブの数",targetParts:"目標パーツ数",targetPartsPlaceholder:"例: 50",targetPartsHelp:"必要なオブジェクトの総数",tagsLabel:"タグ（カンマ区切り）",tagsPlaceholder:"カンマ区切りのタグ",dueDate:"期限",priority:"優先度",priorityLow:"低",priorityNormal:"通常",priorityHigh:"高",priorityUrgent:"緊急",statusActive:"進行中",statusCompleted:"完了",statusArchived:"アーカイブ済み",done:"完了",completed:"完了",failed:"失敗",inQueue:"キュー内",noPrintsYet:"印刷履歴なし",printJobs:"印刷ジョブ",partsPrinted:"印刷済みパーツ",failedParts:"失敗パーツ",import:"インポート",export:"エクスポート",importProject:"プロジェクトをインポート",exportAll:"すべてのプロジェクトをエクスポート",loading:"プロジェクトを読み込み中...",noEditPermission:"プロジェクトを編集する権限がありません",noDeletePermission:"プロジェクトを削除する権限がありません",noCreatePermission:"プロジェクトを作成する権限がありません",noImportPermission:"プロジェクトをインポートする権限がありません",noExportPermission:"プロジェクトをエクスポートする権限がありません",toast:{created:"プロジェクトを作成しました",updated:"プロジェクトを更新しました",deleted:"アーカイブを削除しました",imported:"プロジェクトをインポートしました",multipleImported:"{{count}}件のプロジェクトをインポートしました",importFailed:"インポートに失敗しました",exported:"プロジェクトをエクスポートしました（メタデータのみ）"}},projectDetail:{notFound:"見つかりません",backToProjects:"プロジェクト一覧に戻る",export:"エクスポート",exportProject:"プロジェクトをエクスポート",noExportPermission:"プロジェクトをエクスポートする権限がありません",noEditPermission:"このプロジェクトを編集する権限がありません",partOf:"所属先",priorityLabel:"優先度",noPrints:"このプロジェクトにはまだ印刷がありません",status:{active:"進行中",completed:"完了",archived:"アーカイブ済み"},priority:{low:"低",normal:"通常",high:"高",urgent:"緊急"},dueDate:{overdue:"期限超過",today:"今日が期限",daysLeft:"残り{{count}}日"},progress:{platesProgress:"プレート進捗",partsProgress:"パーツ進捗",printJobs:"印刷ジョブ",parts:"パーツ",percentComplete:"{{percent}}% 完了",remaining:"残り {{count}} 件"},stats:{printJobs:"印刷ジョブ",total:"合計",failed:"失敗 {{count}} 件",partsPrinted:"印刷済みパーツ {{count}} 件",printTime:"印刷時間",filamentUsed:"フィラメント使用量"},cost:{title:"コスト追跡",filamentCost:"フィラメント",energy:"エネルギー",totalCost:"合計コスト",total:"合計",includesBom:"BOM含む",budget:"予算",remaining:"残り"},subProjects:{title:"サブプロジェクト ({{count}})"},notes:{title:"メモ",noEditPermission:"このプロジェクトを編集する権限がありません",placeholder:"このプロジェクトについてメモを追加...",empty:"<空>"},files:{title:"ファイル",linkFolders:"ファイルマネージャーからフォルダーをリンク",forQuickAccess:"してクイックアクセスできるようにします。",fileCount:"{{count}}ファイル",empty:"<空>",noFiles:"このフォルダにファイルはありません。",print:"今すぐ印刷",addToQueue:"キューに追加"},bom:{title:"部品表",acquired:"{{completed}}/{{total}} 取得済み",showAll:"すべて表示",hideDone:"完了を非表示",addPart:"パーツを追加",noAddPermission:"パーツを追加する権限がありません",partNamePlaceholder:"パーツ名",partName:"パーツ名",qty:"数量",price:"価格 ({{currency}})",sourcingUrlPlaceholder:"URL（任意）",remarksPlaceholder:"備考",deletePart:"パーツを削除",deleteConfirm:"「{{name}}」を削除しますか？",noUpdatePermission:"パーツを更新する権限がありません",noEditPermission:"このプロジェクトを編集する権限がありません",noDeletePermission:"プロジェクトを削除する権限がありません",totalCost:"合計コスト",empty:"<空>"},timeline:{title:"アクティビティタイムライン",empty:"<空>"},template:{saveAsTemplate:"テンプレートとして保存",noCreatePermission:"プロジェクトを作成する権限がありません"},queue:{title:"印刷キュー",viewAll:"すべて表示",printing:"印刷中 {{count}} 件",queued:"キュー内 {{count}} 件"},prints:{title:"印刷 ({{count}})"},toast:{projectUpdated:"プロジェクトを更新しました",partAdded:"パーツを追加しました",partRemoved:"パーツを削除しました",exportFailed:"エクスポートに失敗しました",projectExported:"プロジェクトがエクスポートされました",templateCreated:"プロジェクトからテンプレートを作成しました"}},system:{title:"システム情報",version:"バージョン",uptime:"稼働時間",cpuUsage:"CPU使用率",memoryUsage:"メモリ使用量",diskUsage:"ディスク使用量",networkInfo:"ネットワーク情報",logs:"ログ",debugMode:"デバッグモード",enableDebug:"デバッグログを有効化",disableDebug:"デバッグログを無効化",downloadLogs:"ログをダウンロード",clearLogs:"通知ログを削除",dockerInfo:"Docker情報",containerName:"コンテナ名",imageName:"イメージ名",platform:"プラットフォーム",architecture:"アーキテクチャ"},library:{title:"フィラメントライブラリ",addFilament:"フィラメントを追加",editFilament:"フィラメントを編集",deleteFilament:"フィラメントを削除",vendor:"メーカー",material:"素材",color:"色",kFactor:"K値",temperature:"温度",noFilaments:"ライブラリにフィラメントがありません",deleteConfirm:"このフィラメントを削除しますか？",importFromPrinter:"プリンターからインポート",exportToFile:"ファイルにエクスポート"},slice:{title:"モデルをスライス",action:"スライス",actionAll:"{{count}} プレートすべてをスライス",actionAllTitle:"すべてのプレートを 1 つのマルチプレート出力としてスライスします（アーカイブは 1 件）。フィラメントの選択はプロジェクトで定義されたすべてのスロットを対象とします。",allPlatesToggle:"{{count}} プレートすべてをスライス",slicing:"スライス中…",printer:"プリンタープロファイル",process:"プロセスプロファイル",filament:"フィラメントプロファイル",filamentSlot:"フィラメント {{index}}（{{type}}）",selectPreset:"— プリセットを選択 —",loadingPresets:"プリセットを読み込み中…",analyzingPlateFilaments:"プレートのフィラメントを分析中…",analyzingPlateFilamentsHint:"このプレートが使用するAMSスロットを検出するためにプレビュースライスを実行中。キャッシュ後は再オープンが即座になります。",previewToast:"{{name}}を分析中 – {{elapsed}}",previewWithProgress:"{{name}}を分析中 – {{stage}} ({{percent}}%) – {{elapsed}}",notUsedByPlate:"— このプレートでは使用しない",noPresetsForSlot:"プリセットなし",otherPrinters:"他のプリンター",presetsLoadFailed:"プリセットの読み込みに失敗。先に設定 → プロファイルからインポートしてください。",refreshPresets:"再読み込み",refreshPresetsTitle:"プリセットを再取得 — クラウドとバンドルの最新リストを取得します（Bambu Studio または Bambu Handy でプリセットを削除した後にお使いください）",allPresetsRequired:"すべてのプリセットを選択する必要があります",bundle:"スライサーバンドル",bundleNone:"— なし（プリセットを個別に選択）—",bundleAllRequired:"バンドルのプロセスとすべてのフィラメントスロットを選択してください",enqueuing:"スライスジョブを送信中…",queued:"待機中…",failed:"スライスに失敗。サイドカーのログを確認してください。",startedToast:"バックグラウンドで{{name}}をスライス中…",queuedToast:"待機中: {{name}} – {{elapsed}}",runningToast:"{{name}}をスライス中 – {{elapsed}}",runningWithProgress:"{{name}} – {{stage}} ({{percent}}%) – {{elapsed}}",runningWithProgressMultiPlate:"プレート {{plateIndex}} / {{plateCount}} • {{name}} – {{stage}} ({{percent}}%) – {{elapsed}}",completedToast:"{{name}}をスライス済み",failedTitle:"スライスに失敗しました",failedToast:"{{name}}のスライスに失敗: {{detail}}",tier:{local:"インポート済み",cloud:"Bambu Cloud",orcaCloud:"Orca Cloud",standard:"標準"},cloud:{notAuthenticated:"Bambu Cloudにサインイン（設定 → プロファイル → Bambu Cloud）してクラウドプリセットを表示。",expired:"Bambu Cloudセッションの有効期限切れ – クラウドプリセットを更新するには再ログインしてください。",unreachable:"Bambu Cloudに接続できません。ローカルと標準のプリセットは引き続き使用できます。"},orcaCloud:{notAuthenticated:"Orcaプリセットを表示するには、Orca Cloudにサインインしてください（プロファイル → Orca Cloud）。",expired:"Orca Cloudセッションが期限切れです — Orcaプリセットを更新するには再度サインインしてください。",unreachable:"Orca Cloudは現在到達できません。他のプリセットは引き続き動作します。"},bedType:{label:"ビルドプレート",auto:"自動（プロセスプリセットを使用）",coolPlate:"クールプレート",coolPlateSuperTack:"Cool Plate SuperTack",engineering:"Engineering Plate",highTemp:"High Temp Plate",texturedPEI:"Textured PEI Plate",smoothPEI:"Smooth PEI Plate"}},spoolman:{title:"Spoolman連携",enabled:"Spoolman有効",url:"Spoolman URL",connected:"接続中",disconnected:"未接続",testConnection:"接続テスト",sync:"同期",syncing:"同期中...",lastSync:"最終同期",linkToSpoolman:"Spoolmanに連携",openInSpoolman:"Spoolmanで開く",unlinkSpool:"スプールのリンクを解除",unlinkConfirmTitle:"スプールの割り当てを解除しますか？",unlinkConfirmMessage:"このスロットからスプールが削除されます。スプール自体のデータは変更されません。",selectSpool:"スプールを選択",noUnlinkedSpools:"割り当てられていないスプールがありません",linkSuccess:"スプールが正常に割り当てられました",linkFailed:"スプールの割り当てに失敗しました",unlinkSuccess:"スプールの割り当てが正常に解除されました",unlinkFailed:"スプールの割り当て解除に失敗しました",linkedSpool:"割り当て済みスプール",spoolId:"スプールID",fillSourceLabel:"(Spoolman)",weight:"重量",remaining:"残り",disableWeightSync:"AMS推定重量同期を無効化",disableWeightSyncDesc:"AMS推定値から残量を更新しません。AMSの割合ベースの推定よりもSpoolmanの使用量追跡を優先する場合に使用してください。新しいスプールは引き続きAMS推定値を初期重量として使用します。",reportPartialUsage:"失敗した印刷の部分使用量を報告",reportPartialUsageDesc:"印刷が失敗またはキャンセルされた場合、レイヤー進捗に基づいてその時点までの推定フィラメント使用量を報告します。"},inventory:{title:"スプール在庫管理",subtitle:"スプールを管理",spoolmanMixedContentTitle:"Spoolman を HTTPS で読み込めません — ブラウザが混在コンテンツをブロックしています",spoolmanMixedContentBody:"Bambuddy はリバースプロキシ経由で HTTPS 配信されていますが、Spoolman の URL は HTTP のままです。ブラウザはセキュリティ上の理由で混在コンテンツをブロックするため、埋め込みの Spoolman UI を表示できません。Spoolman も HTTPS でアクセスできる必要があります。",spoolmanMixedContentFixReverseProxy:"Spoolman を Bambuddy と同じリバースプロキシ（Traefik / Nginx / Caddy）の後ろに HTTPS で配置し、設定で Spoolman URL を新しい HTTPS アドレスに更新してください。",spoolmanMixedContentFixOpenNewTab:"回避策として Spoolman を新しいタブで HTTP として開くことができます — 混在コンテンツのルールは埋め込みフレームのみに適用され、独立したタブは問題なく動作します。",spoolmanOpenInNewTab:"Spoolman を新しいタブで開く",labels:{title:"スプールラベルを印刷",selectedCount:"{{count}}件選択中",pickSpools:"ラベルを印刷するスプールを選択:",searchPlaceholder:"名前、ブランド、#IDで検索",filterByMaterial:"素材:",allMaterials:"すべて",selectVisible:"表示中をすべて選択 ({{count}})",deselectVisible:"表示中を選択解除",clearAll:"すべてクリア",noSpoolsToShow:"表示するスプールはありません。フィルターを調整して再試行してください。",noMatches:"現在の検索またはフィルターに一致するスプールはありません。",printOne:"このスプールのラベルを印刷",printLabels:"ラベルを印刷…",bulkTitle:"現在表示中の{{count}}件からラベルを印刷するスプールを選択",noSpoolsTitle:"ラベル付けするスプールなし",error:"ラベルを生成できませんでした: {{msg}}",sortBy:{label:"並べ替え:",id:"ID順",color:"色順"},templates:{amsHolderSmall:{label:"AMS ホルダー — 小 (74 × 33 mm)",hint:"1ページにつき1枚；MakerWorld モデル 752566 (AMS フィラメントラベルホルダー) の印刷可能なラベルに対応します。"},amsHolderLarge:{label:"AMS ホルダー — 大 (75 × 55 mm)",hint:"1ページにつき1枚；AMS フィラメントラベルホルダーのカード紙挿入バージョンに対応します。色見本、ブランド、素材、ID、QR コードを表示できる広さです。"},box40x30:{label:"ボックスラベル (40 × 30 mm)",hint:"1ページに1枚。DK/Brother の一般的なロールサイズで、フィラメント袋や保管箱のラベルに適しています。"},box:{label:"Box label (62 × 29 mm)",hint:"1ページに1ラベル、Brother PT/QLおよびDymoの小さなラベル用サイズ。"},averyL7160:{label:"Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)",hint:"EUシート規格、A4ページに21枚のラベル。"},avery5160:{label:"Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)",hint:"米国シート規格、Letterページに30枚のラベル。"}}},addSpool:"スプールを追加",editSpool:"スプールを編集",copySpool:"スプールをコピー",material:"素材",selectMaterial:"素材を選択...",subtype:"サブタイプ",brand:"ブランド",searchBrand:"ブランドを検索...",useCustomBrand:"「{{brand}}」を使用",useCustomMaterial:"カスタム素材を使用: {{material}}",colorName:"色名",colorNamePlaceholder:"ジェイドホワイト、ファイアレッド...",color:"色",hexColor:"HEXカラー",pickColor:"カスタムカラーを選択",labelWeight:"表示重量",coreWeight:"空スプール重量",searchSpoolWeight:"スプール重量を検索...",weightUsed:"使用量",currentWeight:"残量",measuredWeight:"計測重量",spoolName:"スプール",costPerKg:"kgあたりのコスト",storageLocation:"保管場所",storageLocationPlaceholder:"例：棚A、引き出し1",openInInventory:"インベントリで開く",measuredWeightError:"計測重量は{{min}}gから{{max}}gの間で入力してください。",slicerFilament:"スライサーフィラメント",slicerFilamentName:"スライサープリセット名",slicerPreset:"スライサープリセット",searchPresets:"フィラメントプリセットを検索...",selectedPreset:"選択済み",noPresetsFound:"プリセットが見つかりません",tempOverrides:"温度オーバーライド",note:"メモ",notePlaceholder:"このスプールに関する追加メモ...",category:"カテゴリ",categoryPlaceholder:"例：本番、試作、クライアントA",categoryNone:"カテゴリなし",storageLocationNone:"保管場所未設定",lowStockThresholdOverride:"在庫低下のしきい値（このスプール）",lowStockThresholdOverrideHelp:"空欄の場合、グローバル設定（{{global}}%）を使用します。",clearRfid:"RFIDタグをクリア",rfidCleared:"RFIDタグをクリアしました",archive:"アーカイブ",restore:"復元",noSpools:"スプールがありません。最初のスプールを追加してください。",noAvailableSpools:"利用可能なスプールがありません。インベントリにスプールを追加するか、別のスロットからスプールの割り当てを解除してください。",kProfiles:"Kプロファイル",addKProfile:"Kプロファイルを追加",assignSpool:"スプールを割り当て",unassignSpool:"割り当て解除",assignSuccess:"スプールを割り当て、AMSスロットを設定しました",assignFailed:"スプールの割り当てに失敗しました",selectSpool:"このスロットに割り当てるスプールを選択",assigned:"割り当て済み",assigning:"割り当て中...",searchSpools:"スプールを検索...",showAllSpools:"すべてのスプールを表示",spoolmanSpools:"Spoolman スプール",allMaterials:"すべての素材",filterByBrand:"ブランドで絞り込み...",showArchived:"アーカイブ済みを表示",quickAdd:"クイック追加（在庫）",quantity:"数量",stock:"在庫",configured:"設定済み",spoolsCreated:"{{count}}本のスプールを作成しました",spoolsPartiallyCreated:"{{total}}本中{{created}}本のスプールを作成しました（一部失敗）",spoolCreated:"スプールを作成しました",spoolUpdated:"スプールを更新しました",spoolDeleted:"スプールを削除しました",deepLinkSpoolNotFound:"スプールが見つかりません",deepLinkFetchFailed:"スプールを読み込めませんでした — もう一度お試しください",spoolArchived:"スプールをアーカイブしました",spoolRestored:"スプールを復元しました",kProfileSaveFailed:"Kプロファイル設定を保存できませんでした",syncWeightSpoolNotFound:"スプールが見つかりません — 削除された可能性があります",syncWeightSpoolmanUnreachable:"Spoolmanに接続できません — 後でもう一度お試しください",syncWeightFailed:"重量の同期に失敗しました",spoolmanUnreachable:"Spoolmanに接続できません — 後でもう一度お試しください",deleteSpoolNotFound:"スプールが見つかりません — すでに削除された可能性があります",deleteFailed:"スプールを削除できませんでした",archiveSpoolNotFound:"スプールが見つかりません — すでに削除された可能性があります",archiveFailed:"スプールをアーカイブできませんでした",restoreSpoolNotFound:"スプールが見つかりません — すでに削除された可能性があります",restoreFailed:"スプールを復元できませんでした",saveFailed:"変更を保存できませんでした",tagClearFailed:"タグを削除できませんでした",deleteConfirm:"このスプールを削除しますか？この操作は元に戻せません。",archiveConfirm:"このスプールをアーカイブしますか？",advancedSettings:"詳細設定",filamentInfoTab:"フィラメント情報",paProfileTab:"PAプロファイル",filamentInfo:"フィラメント",additional:"追加情報",loadingPresets:"クラウドプリセットを読み込み中...",cloudConnected:"クラウド接続済み",cloudNotConnected:"クラウド未接続（デフォルト使用）",recentColors:"最近",searchColors:"色を検索...",searchResults:"検索結果",allColors:"すべての色",commonColors:"一般的な色",showLess:"少なく表示",showAll:"すべて表示",noColorsFound:"一致する色がありません",noResults:"結果なし",extraColorsLabel:"追加の色",extraColorsPlaceholder:"EC984C,#6CD4BC,A66EB9,D87694",extraColorsHint:"2〜8個の16進数ストップをカンマで区切って貼り付けます。グラデーションとして表示されます。",extraColorsInvalid:"無効な16進数を無視: {{tokens}}",colorEffectLabel:"エフェクト",colorEffect:{none:"なし",sparkle:"スパークル",wood:"ウッド",marble:"マーブル",glow:"グロー",matte:"マット",silk:"シルク",galaxy:"ギャラクシー",rainbow:"レインボー",metal:"メタル",translucent:"半透明",gradient:"グラデーション",dualColor:"デュアルカラー",triColor:"トリカラー",multicolor:"マルチカラー"},selectMaterialFirst:"フィラメント情報タブで素材を選択してください。",noPrintersConfigured:"プリンターが設定されていません。プリンターを追加してください。",matchingFilter:"フィルター",anyBrand:"すべてのブランド",anyVariant:"すべてのバリアント",autoSelect:"自動選択",matches:"件一致",match:"件一致",noMatches:"一致なし",connected:"接続済み",offline:"オフライン",printerOffline:"プリンターがオフラインです。接続してキャリブレーションプロファイルを表示してください。",noKProfilesMatch:"選択したフィラメントに一致するKプロファイルがありません。",leftNozzle:"左ノズル",rightNozzle:"右ノズル",profilesSelected:"キャリブレーションプロファイル選択済み",totalInventory:"在庫合計",totalConsumed:"総消費量",byMaterial:"素材別",inPrinter:"プリンター内",lowStock:"残量少",sinceTracking:"追跡開始以降",resetConsumedCounter:"カウンタをリセット",resetConsumedCounterTooltip:"このスプールの消費量カウンタを0にする。残量は変更されません。",resetConsumedCounterConfirm:"このスプールの消費量カウンタを0にリセットしますか？以降の印刷は再びゼロからカウントされます。スプール自体、残量計算、設定は変更されません。",resetAllConsumedCounters:"すべてのカウンタをリセット",resetAllConsumedCountersTooltip:"すべてのスプールの消費量カウンタを0にする。残量は変更されません。",resetAllConsumedCountersConfirm:"{{count}}件すべてのスプール（アーカイブ済みを含む）の消費量カウンタを0にリセットしますか？「累計消費量」の値がクリアされ、以降の印刷はゼロからカウントされます。スプール自体と残量は変更されません。",consumedCounterReset:"カウンタをリセットしました",allConsumedCountersReset:"{{count}}件のスプールのカウンタをリセットしました",resetConsumedCounterFailed:"カウンタのリセットに失敗しました",loadedInAms:"AMS/Extに装填中",remaining:"残り",weightCheck:"重量チェック",lastWeighed:"最終計量",neverWeighed:"未計量",search:"スプールを検索...",showing:"表示",to:"〜",of:"/",show:"表示",spools:"スプール",spool:"スプール",page:"ページ",noSpoolsMatch:"結果なし",noSpoolsMatchDesc:"検索やフィルターを調整してみてください。",active:"アクティブ",archived:"アーカイブ済み",all:"すべて",used:"使用済み",new:"新規",clearFilters:"フィルターをクリア",table:"テーブル",cards:"カード",net:"正味",groupSimilar:"グループ化",groupedSpools:"{{count}}本の同一スプール",groupedRows:"行",columns:"列",configureColumns:"列の設定",configureColumnsDesc:"ドラッグして並べ替えるか、矢印を使用してください。目のアイコンで表示/非表示を切り替えます。",visible:"表示中",reset:"リセット",cancel:"キャンセル",applyChanges:"変更を適用",moveUp:"上へ移動",moveDown:"下へ移動",hideColumn:"列を非表示",showColumn:"列を表示",linkToSpool:"スプールにリンク",tagLinked:"タグがスプールにリンクされました",tagLinkFailed:"タグのリンクに失敗しました",tagAlreadyLinked:"タグは既に別のスプールにリンクされています",unknownTag:"不明なRFIDタグが検出されました",usageHistory:"使用履歴",noUsageHistory:"まだ使用記録がありません",printName:"プリント名",weightConsumed:"消費重量",clearHistory:"クリア",historyCleared:"使用履歴がクリアされました",fillSourceLabel:"(在庫)",lowStockThresholdError:"しきい値は0.1から99.9の間でなければなりません",assignMismatchTitle:"材料の不一致",assignMismatchMessage:"選択したスプールの材料「{{spoolMaterial}}」は、{{location}} のトレイ材料「{{trayMaterial}}」と一致しません。割り当てますか？",assignMismatchConfirm:"強制的に割り当て",assignPartialMismatchMessage:"スプールの材料「{{spoolMaterial}}」は「{{trayMaterial}}」に似ていますが、{{location}} と完全には一致しません。続行しますか？",assignProfileMismatchMessage:"スプールのプロファイル「{{spoolProfile}}」は {{location}} のトレイプロファイル「{{trayProfile}}」と一致しません。続行しますか？",assignReconfigureNote:"AMSスロットはスプールのプロファイルで再構成されます。",spoolmanFilamentCatalog:"Spoolmanフィラメントカタログ",pickFromSpoolmanCatalog:"Spoolmanカタログから選択…",spoolmanFilamentSelected:"Spoolmanカタログからフィラメントを選択しました",spoolmanFilamentUnlinked:"フィラメントカタログのリンクを解除しました",noSpoolmanFilaments:"Spoolmanカタログにフィラメントが見つかりません",spoolmanFilamentColorSwatch:"フィラメントの色",spoolWeightManagedBySpoolman:"空スプールの重量はSpoolmanでフィラメントタイプごとに管理されています",spoolmanCatalogLoadFailed:"Spoolmanのフィラメントカタログを読み込めませんでした"},timelapse:{title:"タイムラプス",create:"タイムラプスを作成",download:"ダウンロード",delete:"削除",preview:"プレビュー",frameRate:"フレームレート",quality:"品質",processing:"バックアップファイルを処理中...",noTimelapses:"利用可能なタイムラプスがありません"},ams:{title:"AMS",slot:"スロット",empty:"<空>",emptySlot:"空のスロット",slotEmpty:"空",emptySlotReset:"スプール未割当",unknown:"不明",humidity:"湿度",temperature:"温度",filamentType:"フィラメントタイプ",filamentColor:"色",remaining:"残り",history:"AMS履歴",noHistory:"メンテナンス履歴がありません",configureSlot:"フィラメントプロファイルとK値でスロットを設定",externalSpool:"外部スプール",profile:"プロファイル",kFactor:"K値",fill:"充填率",configure:"設定",used:"使用済み",remainingUnit:"残り"},printModal:{title:"印刷を開始",selectPrinter:"プリンターを選択",selectPlate:"プレートを選択",filamentMapping:"フィラメントマッピング",totalCost:"合計コスト:",slotRemainingShort:" - 残{{grams}}g",printSettings:"印刷設定",bedLeveling:"ベッドレベリング",flowCalibration:"フローキャリブレーション",vibrationCalibration:"振動キャリブレーション",layerInspection:"第一層検査",timelapse:"タイムラプス",startPrint:"印刷を開始",addToQueue:"キューに追加",cancel:"キャンセル",noPrintersAvailable:"利用可能なプリンターがありません",printerBusy:"プリンターは使用中です",printerOffline:"プリンターはオフラインです",sameTypeDifferentColor:"同じ種類、異なる色",filamentTypeNotLoaded:"フィラメントタイプが未読み込み",openCalendar:"カレンダーを開く",leftNozzle:"L",rightNozzle:"R",leftNozzleTooltip:"左ノズル",rightNozzleTooltip:"右ノズル",filamentOverride:"フィラメントオーバーライド",filamentOverrideHint:"モデルベースの割り当てに使用するフィラメントをオプションで上書きします。スケジューラは元の3MF値ではなく、選択したフィラメントに基づいてマッチングします。",originalFilament:"オリジナル",overrideWith:"変更先",resetToOriginal:"オリジナルに戻す",insufficientFilamentTitle:"フィラメントが不足しています",insufficientFilamentMessage:"割り当てられたスプールの一部は、この印刷に必要な量より残量が少ないです:",insufficientFilamentLine:"{{printer}} - {{slot}}: 必要 {{required}}g、残り {{remaining}}g",printAnyway:"それでも印刷",forceColorMatch:"カラーマッチを強制",staggerPrinterStarts:"プリンター開始を段階的に",staggerGroupSize:"グループサイズ",staggerInterval:"間隔（分）",staggerPreview:"{{printers}}台のプリンター → {{size}}台ずつ{{groups}}グループ、{{interval}}分ごとに開始",staggerLastGroup:"最終グループ: {{count}}",staggerTotal:"合計: {{minutes}}分",staggerToPrinters:"{{count}}台のプリンターに段階的に送信",gcodeInjection:"自動印刷G-codeを挿入"},backup:{includesEncryptionKey:"ローカルバックアップにはMFA暗号化キーファイル（DATA_DIR/.mfa_encryption_key）が含まれ、バックアップZIPは自己完結型です。ZIPを機密扱いしてください — ファイルを持つ人は誰でも内部のOIDCクライアントシークレットとTOTPシークレットを復号できます。",title:"バックアップと復元",createBackup:"バックアップを作成",restoreBackup:"バックアップの復元",restoreDescription:"バックアップファイルからすべてのデータを置き換える",downloadBackup:"バックアップをダウンロード",uploadBackup:"バックアップをアップロード",lastBackup:"最終バックアップ",autoBackup:"自動バックアップ",backupNow:"今すぐバックアップ",restoreWarning:"警告: バックアップの復元は現在のすべてのデータを上書きします。",includeArchives:"アーカイブを含む",includeSettings:"設定を含む",includeProfiles:"プロファイルを含む",backupSuccess:"バックアップを作成しました",restoreSuccess:"バックアップを復元しました",backupFailed:"バックアップに失敗しました",restoreFailed:"復元に失敗しました",restoreNote:"復元中、仮想プリンターは停止されます",githubBackup:"GitHubバックアップ",enabled:"有効",cloudLoginRequired:"Bambu Cloudログインが必要です。GitHubバックアップを有効にするには、プロファイル → クラウドプロファイルからサインインしてください。",cloudLoginRequiredShort:"Cloudログインが必要",githubDescription:"プロファイルをプライベートGitHubリポジトリに自動的に同期し、バックアップとバージョン履歴を保持します。",repoIsPrivate:"リポジトリはプライベートです — バックアップしても安全です。",repoIsPublicWarning:"リポジトリが公開（PUBLIC）です。Bambuddyのバックアップには MQTT 認証情報、Home Assistant トークン、Prometheus トークン、Bambu Cloud のメールアドレス、K-プロファイル経由のプリンタアクセスコードが含まれます。プロバイダー側でリポジトリをプライベートに変更するまで保存はブロックされます。",repoVisibilityUnknown:"リポジトリの公開設定を確認できませんでした。Bambuddy はプライベートと確認できないリポジトリへのバックアップを拒否します。保存はブロックされます。",repositoryUrl:"リポジトリURL",repoUrlPlaceholderGitHub:"https://github.com/username/repo-name",repoUrlPlaceholderGitea:"https://gitea.example.com/username/repo-name",repoUrlPlaceholderForgejo:"https://forgejo.example.com/username/repo-name",repoUrlPlaceholderGitLab:"https://gitlab.com/username/repo-name",allowInsecureHttp:"安全でないHTTPを許可",allowInsecureHttpHint:"TLSなしのプライベートネットワーク上のセルフホストインスタンスに対して有効化",personalAccessToken:"個人アクセストークン",tokenSaved:"(保存済み)",enterNewToken:"新しいトークンを入力して更新",tokenHint:"Contents読み書き権限を持つきめ細かいトークン",branch:"ブランチ",provider:"Gitプロバイダー",providerGitHub:"GitHub",providerGitLab:"GitLab",providerGitea:"Gitea",providerForgejo:"Forgejo",manualOnly:"手動のみ",hourly:"毎時",daily:"毎日",weekly:"毎週",includeInBackup:"バックアップに含める",kProfiles:"Kプロファイル",kProfilesDescription:"接続されたプリンターからの圧力キャリブレーション",noPrintersConnected:"プリンターが接続されていません",printersConnected:"{{connected}}/{{total}} 接続済み",cloudProfiles:"クラウドプロファイル",cloudProfilesDescription:"Bambu Cloudからのフィラメント、プリンター、プロセスプリセット",appSettings:"アプリ設定",appSettingsDescription:"Bambuddy設定（データベース全体）",spoolInventory:"スプール在庫",spoolInventoryDescription:"フィラメントスプール、使用履歴、コスト追跡",printArchives:"印刷アーカイブ",printArchivesDescription:"印刷履歴メタデータ（gcode/3MFファイルなし）",lastBackupAt:"最終バックアップ:",noBackupsYet:"バックアップはまだありません",next:"次回:",startingBackup:"バックアップを開始しています...",test:"テスト",enableBackup:"バックアップを有効化",testConnection:"接続テスト",enterRepoUrl:"リポジトリURLを入力してください",enterRepoAndToken:"リポジトリURLとアクセストークンを入力してください",repoRequired:"リポジトリURLは必須です",tokenRequired:"アクセストークンは必須です",githubBackupEnabled:"GitHubバックアップが有効になりました",tokenUpdated:"トークンが更新されました",settingsSaved:"設定が保存されました",failedToSave:"保存に失敗しました: {{message}}",backupCompleteFiles:"バックアップ完了 - {{count}}ファイルが更新されました",backupSkippedNoChanges:"バックアップをスキップ - 変更なし",backupFailed2:"バックアップに失敗しました: {{message}}",clearedLogs:"{{count}}件のログを削除しました",failedToClearLogs:"ログの削除に失敗しました: {{message}}",history:"履歴",clear:"クリア",date:"日付",status:"ステータス",commit:"コミット",localBackup:"ローカルバックアップ",localBackupDescription:"データベース、アーカイブ、アップロード、すべてのファイルを含むBambuddyデータの完全なバックアップを作成します。",downloadBackupLabel:"バックアップをダウンロード",completeBackupZip:"完全バックアップ: データベース + 全ファイル (ZIP)",download:"ダウンロード",preparingBackup:"バックアップを準備しています...",creatingArchive:"バックアップアーカイブを作成しています...大きなアーカイブの場合、時間がかかることがあります。",downloadingFile:"バックアップファイルをダウンロードしています...",backupDownloaded:"バックアップのダウンロードが成功しました",failedToCreateBackup:"バックアップの作成に失敗しました: {{message}}",restore:"復元",restoreReplacesAll:"復元はすべてのデータを置き換えます。",restoreReplacesAllDetail:"現在のデータベースとファイルは完全に置き換えられます。復元後に再起動が必要です。",restoreConfirmTitle:"バックアップを復元",restoreConfirmMessage:'"{{filename}}"から復元してもよろしいですか？現在のデータベースとすべてのファイルが完全に置き換えられます。復元後にアプリケーションの再起動が必要です。',restoreConfirmButton:"バックアップを復元",uploadingFile:"バックアップファイルをアップロードしています...",backupRestoredRestart:"バックアップが復元されました。Bambuddyを再起動してください。",failedToRestore:"バックアップの復元に失敗しました。ファイル形式を確認してください。",reloadNow:"今すぐリロード",creatingBackup:"バックアップを作成中",restoringBackup:"バックアップを復元中",preparing:"準備中...",processing:"処理中...",doNotClosePage:"このページを閉じたり、移動しないでください。大きなバックアップの場合、この操作には数分かかることがあります。",restoring:"復元中...",restoreComplete:"復元完了",restoreFailed2:"復元失敗",importSettings:"バックアップファイルから設定をインポート",pleaseWaitRestoring:"データの復元中です。お待ちください",selectBackupFile:"クリックしてバックアップファイルを選択 (.jsonまたは.zip)",duplicateHandling:"重複処理の仕組み:",matchPrinters:"プリンター",matchPrintersBy:"シリアル番号で照合",matchSmartPlugs:"スマートプラグ",matchSmartPlugsBy:"IPアドレスで照合",matchNotificationProviders:"通知プロバイダー",matchNotificationProvidersBy:"名前で照合",matchFilaments:"フィラメント",matchFilamentsBy:"名前 + タイプ + ブランドで照合",matchArchives:"アーカイブ",matchArchivesBy:"コンテンツハッシュで照合（常にスキップ）",matchPendingUploads:"保留中のアップロード",matchPendingUploadsBy:"ファイル名で照合",matchSettingsTemplates:"設定とテンプレート",matchSettingsTemplatesBy:"常に上書き",replaceExisting:"既存のデータを置き換え",keepExisting:"既存のデータを保持",overwriteDescription:"既に存在する項目をバックアップデータで上書き",keepDescription:"まだ存在しない項目のみ復元",overwriteCaution:"注意:",overwriteWarning:"上書きすると、現在の設定がバックアップのデータで置き換えられます。プリンターのアクセスコードはセキュリティのため上書きされません。",cancel:"キャンセル",processingBackup:"バックアップファイルを処理しています...",itemsRestored:"復元済み",itemsSkipped:"スキップ済み",restored:"復元済み",skippedAlreadyExist:"スキップ（既に存在）",filesCategory:"ファイル（3MF、サムネイルなど）",andMore:"...他{{count}}件",newApiKeysGenerated:"新しいAPIキーが生成されました",keysShownOnce:"これらのキーは一度だけ表示されます。今すぐコピーしてください！",copy:"コピー",noDataFound:"バックアップファイルに復元するデータが見つかりませんでした。",close:"閉じる",scheduledBackup:"スケジュールされたバックアップ",scheduledBackupDescription:"スケジュールに基づいてバックアップスナップショットを自動作成。出力ディレクトリはNASや外部ストレージにマウント可能。",frequency:"頻度",backupTime:"時間",retention:"保持期間",retentionDescription:"保持するバックアップ数",outputPath:"出力パス",outputPathPlaceholder:"デフォルト: {{path}}",outputPathDescription:"デフォルトの場所を使用する場合は空白のまま",runNow:"今すぐ実行",backupFiles:"バックアップファイル",noScheduledBackups:"バックアップなし",deleteBackup:"削除",deleteBackupConfirm:"このバックアップファイルを削除しますか？",backupRunning:"バックアップ中...",scheduledBackupComplete:"バックアップが正常に完了しました",scheduledBackupFailed:"バックアップに失敗",nextBackup:"次回バックアップ",backupSize:"サイズ",localTimeHint:"現地時刻 ({{tz}})",defaultPathLabel:"デフォルト:",categories:{settings:"設定",notification_providers:"通知プロバイダー",notification_templates:"通知テンプレート",smart_plugs:"スマートプラグ",printers:"プリンター",filaments:"フィラメント",maintenance_types:"メンテナンスタイプ",archives:"アーカイブ",projects:"プロジェクト",pending_uploads:"保留中のアップロード",external_links:"外部リンク",api_keys:"APIキー"}},tags:{title:"タグ",addTag:"タグを追加",editTag:"タグを編集",deleteTag:"タグを削除",tagName:"タグ名",tagColor:"タグの色",noTags:"タグがありません",deleteConfirm:"このタグを削除しますか？",manageTags:"タグを管理"},uploadModal:{title:"3MFファイルのアップロード",dragDrop:".3mfファイルをここにドラッグ＆ドロップ",or:"または",browseFiles:"ファイルを参照",extractionInfo:"プリンターモデルは3MFファイルのメタデータから自動的に抽出されます。",uploaded:"アップロード済み",failed:"アップロードに失敗しました",uploading:"アップロード中...",upload:"アップロード",uploadFailed:"アップロード失敗"},editArchive:{title:"アーカイブを編集",name:"名前",namePlaceholder:"印刷名",printer:"プリンター",noPrinter:"プリンターなし",project:"プロジェクト",noProject:"プロジェクトなし",itemsPrinted:"印刷数",itemsPrintedHelp:"この印刷ジョブで製造したアイテム数",notes:"メモ",notesPlaceholder:"この印刷についてメモを追加...",externalLink:"外部リンク",externalLinkPlaceholder:"https://...",externalLinkHelp:"Printables、Thingiverse、その他のソースへのリンク",tags:"タグ",tagsPlaceholder:"タグを追加...",addMoreTags:"タグをさらに追加...",matchingTags:'"{{query}}" に一致',existingTags:"既存のタグ",clickToAdd:"（クリックして追加）",status:"ステータス",failureReason:"失敗理由",selectReason:"理由を選択...",photos:"印刷結果の写真",photosHelp:"+ をクリックして印刷結果の写真を追加",printResult:"印刷結果",saving:"保存中...",failureReasons:{adhesionFailure:"定着不良",spaghettiDetached:"スパゲッティ / 剥離",layerShift:"レイヤーシフト",cloggedNozzle:"ノズル詰まり",filamentRunout:"フィラメント切れ",warping:"反り",stringing:"糸引き",underExtrusion:"押出不足",powerFailure:"電源障害",userCancelled:"ユーザーによるキャンセル",other:"その他"},statuses:{completed:"完了",failed:"失敗",aborted:"キャンセル",printing:"印刷中"}},kProfiles:{title:"Kプロファイル",noPrintersConfigured:"プリンターが設定されていません",addPrinterInSettings:"Kプロファイルを管理するには設定でプリンターを追加してください",noActivePrinters:"アクティブなプリンターがありません",enablePrinterConnection:"Kプロファイルを表示するにはプリンター接続を有効にしてください",loadingProfiles:"Kプロファイルを読み込み中...",printerOffline:"プリンターオフライン",printerOfflineDesc:"選択したプリンターは接続されていません。電源を入れてKプロファイルを表示してください。",noMatchingProfiles:"一致するプロファイルなし",noMatchingProfilesDesc:"検索条件に一致するプロファイルがありません",noKProfiles:"Kプロファイルなし",noKProfilesDesc:"{{diameter}}mmノズル用の圧力キャリブレーションプロファイルが見つかりません",createFirstProfile:"最初のプロファイルを作成",printer:"プリンター",nozzle:"ノズル",refresh:"更新",addProfile:"K-プロファイルを追加",export:"エクスポート",import:"インポート",select:"選択",selectAll:"すべて選択",delete:"削除",searchPlaceholder:"名前またはフィラメントで検索...",allExtruders:"すべてのエクストルーダー",leftOnly:"左のみ",rightOnly:"右のみ",allFlow:"すべてのフロー",hfOnly:"HFのみ",sOnly:"Sのみ",sortName:"ソート: 名前",sortKValue:"ソート: K値",sortFilament:"ソート: フィラメント",leftExtruder:"左エクストルーダー",rightExtruder:"右エクストルーダー",modal:{addTitle:"Kプロファイルを追加",editTitle:"Kプロファイルを編集",profileName:"プロファイル名",profileNamePlaceholder:"マイPLAプロファイル",kValue:"K値",kValuePlaceholder:"0.020",kValueHelp:"一般的な範囲: PLA 0.01〜0.06、PETG 0.02〜0.10",filament:"フィラメント",selectFilament:"フィラメントを選択...",noFilamentsHelp:"フィラメントが見つかりません。Bambu Studioでまずプロファイルを作成してください。",flowType:"フロータイプ",highFlow:"ハイフロー",standard:"スタンダード",nozzleSize:"ノズルサイズ",extruder:"エクストルーダー",extruders:"エクストルーダー",left:"左",right:"右",notes:"メモ（ローカル保存）",notesPlaceholder:"このプロファイルのメモを追加...",notesHelp:"メモはBambuddyに保存され、プリンターには保存されません",syncing:"プリンターと同期中...",savingExtruder:"エクストルーダーに保存中 {{current}}/{{total}}...",pleaseWait:"お待ちください"},deleteConfirm:{title:"プロファイルを削除",cannotUndo:"元に戻せません",message:"「{{name}}」をプリンターから削除しますか？"},bulkDelete:{title:"プロファイルを削除",cannotUndo:"元に戻せません",message:"選択した{{count}}件のプロファイルをプリンターから削除しますか？"},toast:{profileSaved:"Kプロファイルを保存しました",profilesSaved:"Kプロファイルを{{count}}台のエクストルーダーに保存しました",selectAtLeastOneExtruder:"エクストルーダーを1つ以上選択してください",profileDeleted:"Kプロファイルを削除しました",profilesDeleted:"{{count}}件のプロファイルを削除しました",exportedProfiles:"{{count}}件のプロファイルをエクスポートしました",importedProfiles:"{{total}} 件中 {{count}} 件のプロファイルをインポートしました",noProfilesToExport:"エクスポートするプロファイルがありません",invalidFileFormat:"無効なファイル形式",failedToParseImport:"インポートファイルの解析に失敗しました",failedToSaveBatch:"Kプロファイルの保存に失敗しました",noteSaved:"メモを保存しました",failedToSaveNote:"メモの保存に失敗しました"},permission:{noRead:"プロファイルを更新する権限がありません",noCreate:"プロファイルを追加する権限がありません",noUpdate:"Kプロファイルを更新する権限がありません",noDelete:"Kプロファイルを削除する権限がありません",noExport:"プロファイルをエクスポートする権限がありません",noImport:"プロファイルをインポートする権限がありません"}},virtualPrinter:{title:"仮想プリンター",running:"稼働中",stopped:"停止",description:{default:"Bambu StudioとOrcaSlicerに表示される仮想プリンターを有効化。このプリンターに送信されたファイルは印刷せずに直接アーカイブされます。",proxy:"スライサーのトラフィックを実際のプリンターに転送するプロキシを有効化。任意のネットワーク経由でリモート印刷が可能です。"},enable:{title:"仮想プリンターを有効化",visibleInSlicer:"スライサーの検出リストに「Bambuddy」として表示",proxyingTo:"{{name}}にプロキシ中",notActive:"非アクティブ"},model:{title:"プリンターモデル",description:"エミュレートするプリンターモデルを選択。",restartWarning:"モデルを変更すると仮想プリンターが再起動されます"},accessCode:{title:"アクセスコード",isSet:"アクセスコードが設定されています",notSet:"アクセスコード未設定 - 有効化に必要です",placeholder:"8文字のコードを入力",placeholderChange:"新しいコードを入力して変更",hint:"正確に8文字必要です。スライサーの認証に使用されます。",charCount:"({{count}}/8)"},targetPrinter:{title:"ターゲットプリンター",configured:"プロキシターゲット設定済み",notConfigured:"ターゲットプリンター未選択 - プロキシモードに必要です",placeholder:"プリンターを選択...",hint:"スライサートラフィックの転送先プリンターを選択。プリンターはLANモードである必要があります。",noPrinters:"プリンターが設定されていません。プロキシモードを使用するにはまずプリンターを追加してください。"},remoteInterface:{title:"ネットワークインターフェース上書き",configured:"インターフェース上書き有効",optional:"オプション — 自動検出IPが間違っている場合に使用（複数NIC、Docker、VPNなど）",placeholder:"自動検出（デフォルト）...",hint:"SSDPで広告され、TLS証明書に使用されるIPアドレスを上書きします。Bambuddyに複数のネットワークインターフェースがある場合に便利です。"},mode:{title:"モード",archive:"アーカイブ",archiveDesc:"ファイルを即座にアーカイブ",review:"レビュー",reviewDesc:"アーカイブ前にレビュー",queue:"キュー",queueDesc:"アーカイブしてキューに追加",proxy:"プロキシ",proxyDesc:"実際のプリンターに転送"},autoDispatch:{title:"自動ディスパッチ",description:"キューに追加されたときに自動的に印刷を開始します。オフの場合、手動ディスパッチを待ちます。"},queueForceColorMatch:{title:"色の一致を強制",description:"正確なフィラメントタイプと色がロードされていないプリンターへの送信を拒否します。デフォルトはオフ — これがないと、キューはモデルのみのマッチングを使用し、間違った色がロードされたプリンターを選ぶ可能性があります。"},tailscaleDisabled:{title:"Tailscale統合",description:"このVPがTailscale経由で公開されていることをマークするには有効にしてください。スライサーに貼り付けるIPがわかるよう、ホストのTailscaleアドレスを表示します。CAインポート手順は変更されません — このトグルは証明書に影響しません。"},setupRequired:{title:"セットアップが必要です",description:"仮想プリンター機能を使用するには追加のシステム設定が必要です。ポートフォワーディング、ファイアウォールルール、プラットフォーム固有の設定が含まれます。",readGuide:"有効にする前にセットアップガイドをお読みください"},howItWorks:{title:"仕組み",step1:"同じLAN上では、仮想プリンターはスライサー（Bambu Studio / OrcaSlicer）に自動的に表示されます。他のネットワークからは、IPアドレスとアクセスコードで手動で追加してください。",step2:"アーカイブ、レビュー、キューモードでは、スライサーの「送信」ボタンを使用して3MFファイルをBambuddyにアップロードします。スライサーは「印刷成功」と表示しますが、ファイルは保存され、印刷はされません。",step3:"プロキシモードでは、仮想プリンターはすべてのトラフィックを実際のプリンターに転送します。直接接続されているかのように印刷がすぐに開始されます。"},status:{title:"ステータス詳細",printerName:"プリンター名",model:"モデル",serialNumber:"シリアル番号",mode:"モード",pendingFiles:"保留中のファイル",targetPrinter:"ターゲットプリンター",ftpPort:"FTPポート",mqttPort:"MQTTポート",ftpConnections:"FTP接続数",mqttConnections:"MQTT接続数"},toast:{updated:"仮想プリンター設定を更新しました",failedToUpdate:"設定の更新に失敗しました",copyFailed:"コピーに失敗しました — テキストを手動で選択してください",accessCodeRequired:"先にアクセスコードを設定してください",targetPrinterRequired:"先にターゲットプリンターを選択してください",bindIpRequired:"先にバインドIPを設定してください",accessCodeEmpty:"アクセスコードは空にできません",accessCodeLength:"アクセスコードは8文字である必要があります",created:"仮想プリンターを作成しました",failedToCreate:"仮想プリンターの作成に失敗しました",deleted:"仮想プリンターを削除しました",failedToDelete:"仮想プリンターの削除に失敗しました"},list:{title:"仮想プリンター",add:"追加",addFirst:"仮想プリンターを追加",empty:"仮想プリンターが設定されていません。追加して始めましょう。"},bindIp:{title:"バインドインターフェース",placeholder:"インターフェースを選択...",hint:"この仮想プリンターがバインドするネットワークインターフェース。プリンターごとに一意である必要があります。"},proxy:{accessCodeHint:"プロキシモードでは、スライサーにターゲットプリンターのアクセスコードを使用してください。接続は実際のプリンターに透過的に転送されます。"},addDialog:{title:"仮想プリンターを追加",name:"名前",hint:"アクセスコード、ターゲットプリンター、その他の設定は作成後に設定できます。",create:"作成"},deleteConfirm:{title:"仮想プリンターを削除",message:"「{{name}}」を削除してもよろしいですか？このプリンターのすべてのサービスが停止されます。"},archiveNameSource:{title:"アーカイブ名のソース",description:"仮想プリンター経由でファイルが到着したときに、新しいアーカイブをどのように命名するかを選択します。「メタデータ」は3MFに埋め込まれたスライサータイトル（デフォルト）を使用します。「ファイル名」はBambu StudioがFTPで送信したファイル名を使用します — 「プリンターに送信」ダイアログでジョブ名を変更した場合に便利です。",metadata:"メタデータ",filename:"ファイル名"},caCert:{title:"スライサー証明書",description:"仮想プリンターは Bambuddy CA が署名した TLS 証明書を使用します。この CA 証明書をスライサーの信頼ストアに一度インポートすると接続が受け入れられます — コマンドラインからコピーする必要はありません。",copy:"コピー",copied:"コピーしました",download:"ダウンロード",fingerprint:"SHA-256"}},modelViewer:{openInSlicer:"スライサーで開く",tabs:{model:"3Dモデル",gcode:"G-codeプレビュー"},notAvailable:"利用不可",notSliced:"未スライス",plates:"プレート",allPlates:"全プレート",plateNumber:"プレート {{number}}",plateCount:"{{count}} プレート",plateCount_other:"{{count}} プレート",objectCount:"{{count}} オブジェクト",objectCount_other:"{{count}} オブジェクト",filamentCount:"{{count}} フィラメント",filamentCount_other:"{{count}} フィラメント",eta:"予想時間 {{minutes}} 分",noPreview:"このファイルのプレビューは利用できません",pagination:{pageOf:"ページ {{current}} / {{total}}",prev:"前へ",next:"次へ"},errors:{failedToLoad:"ファイルの読み込みに失敗しました",noMeshes:"3MFファイルにメッシュが見つかりません",unsupportedFormat:"サポートされていないファイル形式です"}},maintenanceDescriptions:{lubricateCarbonRods:"カーボンロッドに潤滑剤を塗布してスムーズな動きを確保",lubricateRails:"リニアレールの潤滑",cleanNozzle:"ノズル/ホットエンドの清掃",checkBelts:"ベルト張力の確認",cleanBuildPlate:"ビルドプレートの清掃",checkExtruder:"エクストルーダーギアの確認",checkCooling:"冷却ファンの確認",generalInspection:"総合点検",cleanCarbonRods:"カーボンロッドの清掃",lubricateSteelRods:"スチールロッドに潤滑剤を塗布してスムーズな動きを確保",cleanSteelRods:"スチールロッドの清掃",cleanLinearRails:"リニアレールを拭いてほこりや汚れを除去",checkPtfeTube:"PTFEチューブの確認",replaceHepaFilter:"HEPAフィルター交換",replaceCarbonFilter:"カーボンフィルター交換",lubricateLeftNozzleRail:"左ノズルレールの潤滑"},smartPlugs:{offline:"オフライン",admin:"管理",openPlugAdminPage:"プラグ管理ページを開く",deleteSmartPlug:"スマートプラグを削除",turnOnSmartPlug:"スマートプラグをオンにする",turnOffSmartPlug:"スマートプラグをオフにする",turnOn:"オンにする",turnOff:"オフにする",addSmartPlug:{scanningNetwork:"ネットワークをスキャン中...",chooseEntity:"エンティティを選択...",connectionFailed:"接続失敗",searchEntities:"エンティティを検索...",searchPowerSensors:"電力センサーを検索...",searchEnergySensors:"エネルギーセンサーを検索...",placeholders:{plugName:"リビングルームプラグ",mqttStateOnValue:"ON, true, 1",mqttSameAsPower:"電力トピックと同じ、または異なる"}},linkedTo:"リンク先:",monitorOnly:"監視のみ",alerts:"アラート",scheduleOn:"オン {{time}}",scheduleOff:"オフ {{time}}",on:"オン",off:"オフ",power:"電力",kwhToday:"本日のkWh",settings:"設定",automationSettings:"自動化設定",showInSwitchbar:"スイッチバーに表示",quickAccessSidebar:"サイドバーからクイックアクセス",enabled:"有効",enableAutomation:"このプラグの自動化を有効にする",autoOn:"自動オン",autoOnDescription:"印刷開始時にオンにする",autoOff:"自動オフ",autoOffDescription:"印刷完了時にオフにする（ワンショット）",autoOffPersistent:"有効のまま維持",autoOffPersistentDescription:"ワンショットではなく印刷間で有効のまま維持",autoOffAfterDrying:"乾燥完了後に自動オフ",autoOffAfterDryingDescription:"AMSの乾燥が完了したらオフにする",delayAfterDryingMinutes:"乾燥後の遅延（分）",turnOffDelayMode:"オフ遅延モード",time:"時間",temp:"温度",delayMinutes:"遅延（分）",tempThreshold:"温度しきい値（°C）",tempThresholdDescription:"ノズルがこの温度以下に冷却されるとオフになります",edit:"編集",deleteConfirm:'"{{name}}"を削除してもよろしいですか？この操作は取り消せません。',turnOnConfirm:'"{{name}}"をオンにしてもよろしいですか？',turnOffConfirm:'"{{name}}"をオフにしてもよろしいですか？接続されたデバイスの電源が切れます。',failedToTurn:'"{{name}}"を{{action}}できませんでした',unknown:"不明",addTitle:"スマートプラグを追加",editTitle:"スマートプラグを編集",stopScanning:"スキャン停止",discoverTasmota:"Tasmotaデバイスを検出",foundDevices:"{{count}}台のデバイスが見つかりました - クリックして選択:",noDevicesFound:"ネットワーク上にTasmotaデバイスが見つかりません",haNotConfigured:"Home Assistantが設定されていません。設定場所:",haSettingsPath:"設定 → ネットワーク → Home Assistant",selectEntity:"エンティティを選択 *",ipAddress:"IPアドレス *",nameLabel:"名前 *",username:"ユーザー名",password:"パスワード",authHint:"Tasmotaデバイスが認証を必要としない場合は空のままにしてください",linkToPrinter:"プリンターにリンク",noPrinter:"プリンターなし（手動制御のみ）",linkingDescription:"リンクすると印刷開始/完了時に自動でオン/オフできます",powerAlerts:"電力アラート",alertAbove:"上限アラート（W）",alertBelow:"下限アラート（W）",alertDescription:"電力消費がこれらのしきい値を超えた場合に通知します。無効にするには空のままにしてください。",dailySchedule:"デイリースケジュール",turnOnAt:"オンにする時刻",turnOffAt:"オフにする時刻",scheduleDescription:"毎日これらの時刻にプラグを自動的にオン/オフします。スキップするには空のままにしてください。",showOnPrinterCard:"プリンターカードに表示",displayOnPrinterCard:"プリンターカードにボタンを表示",connectedResult:"接続成功！",deviceLabel:"デバイス: {{name}} - ",stateLabel:"状態: {{state}}",test:"テスト",delete:"削除",save:"保存",add:"追加",cancel:"キャンセル",failedToStartScan:"スキャンを開始できませんでした",nameRequired:"名前は必須です",entityRequired:"Home AssistantプラグにはエンティティIDが必要です",mqttTopicRequired:"電力、エネルギー、または状態監視用に少なくとも1つのMQTTトピックを設定する必要があります",loadingEntities:"エンティティを読み込み中...",loading:"読み込み中...",failedToLoadEntities:"エンティティの読み込みに失敗しました: {{error}}",noEntitiesMatching:'"{{search}}"に一致するエンティティが見つかりません',noEntitiesAvailable:"利用可能なエンティティがありません",searchingEntities:"すべてのエンティティを検索中（{{count}}件見つかりました）",showingEntities:"switch、light、input_booleanを表示（{{count}}件利用可能）",energyMonitoringOptional:"エネルギー監視（オプション）",energyMonitoringHint:"電力/エネルギーデータを提供するセンサーを検索して選択します。",powerSensorW:"電力センサー（W）",energyTodayKwh:"本日のエネルギー（kWh）",totalEnergyKwh:"総エネルギー（kWh）",noMatchingSensors:"一致するセンサーがありません",none:"なし",mqttNotConfigured:"MQTTブローカーが設定されていません。ブローカーアドレスを設定してください:",mqttSettingsPath:"設定 → ネットワーク → MQTT配信",mqttNotConfiguredSuffix:"（配信を有効にする必要はありません。ブローカーの詳細を入力するだけです）。",mqttMonitorOnlyDescription:"MQTTプラグはMQTTサブスクリプション経由で電力/エネルギーデータを受信します。オン/オフ制御は利用できません - MQTTブローカーまたはホームオートメーションシステムを使用してください。",powerMonitoring:"電力監視",energyMonitoring:"エネルギー監視",stateMonitoring:"状態監視",optional:"オプション",topic:"トピック",jsonPath:"JSONパス",multiplier:"乗数",onValue:"ON値",mqttPowerHint:`JSONパスはJSONペイロードから値を抽出します（例: "power_l1"）。トピックが生の数値を送信する場合は空のままにしてください。
 乗数: mW→Wは0.001、kW→Wは1000を使用。`,mqttEnergyHint:`JSONパスはJSONペイロードから値を抽出します。生の値の場合は空のままにしてください。
 乗数: Wh→kWhは0.001、MWh→kWhは1000を使用。`,mqttStateHint:`JSONパスはJSONペイロードから値を抽出します。生の値の場合は空のままにしてください。
-ON値: "ON"を意味する正確な文字列。自動検出（ON、true、1）の場合は空のままにしてください。`,restControl:"コントロール",restOnUrl:"オンURL",restOffUrl:"オフURL",restOnBody:"ONリクエスト本文",restOffBody:"OFFリクエスト本文",restMethod:"HTTPメソッド",restHeaders:"Custom Headers (JSON)",restStatusUrl:"ステータスURL",restStatusPath:"状態JSONパス",restStatusOnValue:"ON値",restPowerUrl:"電力URL",restPowerPath:"電力JSONパス",restPowerMultiplier:"電力乗数",restEnergyUrl:"エネルギーURL",restEnergyPath:"電力量JSONパス",restEnergyMultiplier:"エネルギー乗数",restUrlRequired:"RESTプラグには少なくとも1つのURL（ONまたはOFF）が必要",restHeadersHint:'例: {"Authorization": "Bearer your-token"}',restBodyHint:'例：ON, {"state": "on"}',restStatusHint:"現在の状態を取得するURL",restPathHint:"例: state または data.power.status",restPowerUrlHint:"電力データ用の個別URL（空欄の場合はステータスURLを使用）",restEnergyUrlHint:"エネルギーデータ用の個別URL（空欄の場合はステータスURLを使用）",restEnergyHint:"各値は個別のURLを使用するか、ステータスURLにフォールバックできます。乗数で単位変換が可能です（例：WhからkWhへの変換は0.001）。",testConnection:"接続テスト",connectionSuccess:"接続成功",noSwitchesInSwitchbar:"スイッチバーにスイッチがありません",enableSwitchbarHint:"設定 > スマートプラグで「スイッチバーに表示」を有効にしてください"},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"メール",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"SMTPメール通知",telegram:"Telegramボット経由の通知",discord:"Webhook経由でDiscordチャンネルに送信",ntfy:"無料のセルフホスト可能なプッシュ通知",pushover:"シンプルで信頼性の高いプッシュ通知",callmebot:"CallMeBot経由の無料WhatsApp通知",webhook:"任意のURLへの汎用HTTP POST",homeassistant:"Home Assistantダッシュボードの永続通知"},lastSuccess:"最終: {{date}}",error:"エラー",printer:"プリンター:",allPrinters:"すべてのプリンター",sendTestNotification:"テスト通知を送信",eventSettings:"イベント設定",enabled:"有効",sendFromProvider:"このプロバイダーから通知を送信",printEvents:"印刷イベント",printerStatus:"プリンターステータス",amsAlarms:"AMSアラーム",amsHtAlarms:"AMS-HTアラーム",printQueue:"印刷キュー",start:"開始",plateCheck:"プレートチェック",complete:"完了",failed:"失敗",stopped:"停止",progress:"進捗",offline:"オフライン",lowFilament:"フィラメント残量低下",maintenance:"メンテナンス",amsHumidity:"AMS湿度",amsTemp:"AMS温度",amsHtHumidity:"AMS-HT湿度",amsHtTemp:"AMS-HT温度",bedCooled:"ベッド冷却済み",firstLayer:"第1層完了",quiet:"静音",digest:"ダイジェスト {{time}}",printStarted:"印刷開始",plateNotEmpty:"プレートが空でない",plateNotEmptyDescription:"印刷前にオブジェクトが検出されました",printCompleted:"印刷完了",bedCooledLabel:"ベッド冷却済み",bedCooledDescription:"印刷後にベッドがしきい値以下に冷却",firstLayerCompleteLabel:"第1層完了",firstLayerCompleteDescription:"第1層完了時にスナップショット付きで通知",missingSpoolAssignmentLabel:"スプール割り当て不足",missingSpoolAssignmentDescription:"印刷開始時に必要トレイへスプールが未割り当ての場合に通知",printFailed:"印刷失敗",printStopped:"印刷停止",progressMilestones:"進捗マイルストーン",progressMilestonesDescription:"25%、50%、75%で通知",printerOffline:"プリンターオフライン",printerError:"プリンターエラー",lowFilamentLabel:"フィラメント残量低下",maintenanceDue:"メンテナンス期限",maintenanceDueDescription:"メンテナンスが必要な場合に通知",amsHumidityHigh:"AMS湿度高",amsHumidityHighDescription:"通常AMSの湿度がしきい値を超過",amsTemperatureHigh:"AMS温度高",amsTemperatureHighDescription:"通常AMSの温度がしきい値を超過",amsHtHumidityHigh:"AMS-HT湿度高",amsHtHumidityHighDescription:"AMS-HTの湿度がしきい値を超過",amsHtTemperatureHigh:"AMS-HT温度高",amsHtTemperatureHighDescription:"AMS-HTの温度がしきい値を超過",inventoryAlerts:"在庫アラート",stockReorderAlert:"発注アラート",stockReorderAlertDescription:"SKUが発注点に達しました",stockBreakAlert:"在庫切れアラート",stockBreakAlertDescription:"入荷前に在庫が枯渇する見込みです",jobAdded:"ジョブ追加",jobAddedDescription:"キューにジョブが追加されました",jobAssigned:"ジョブ割り当て",jobAssignedDescription:"モデルベースのジョブがプリンターに割り当てられました",jobStarted:"ジョブ開始",jobStartedDescription:"キュージョブの印刷が開始されました",jobWaiting:"ジョブ待機中",jobWaitingDescription:"フィラメントまたはプリンター待ちのジョブ",jobSkipped:"ジョブスキップ",jobSkippedDescription:"ジョブがスキップされました（前のジョブが失敗）",jobFailed:"ジョブ失敗",jobFailedDescription:"ジョブの開始に失敗しました",queueComplete:"キュー完了",queueCompleteDescription:"すべてのキュージョブが完了しました",quietHours:"静音時間",noNotificationsDuring:"この時間帯は通知を送信しません",editProviderToChangeQuietHours:"プロバイダーを編集して静音時間を変更",dailyDigest:"デイリーダイジェスト",batchNotifications:"通知をまとめて1日のサマリーとして送信",sendAt:"{{time}}に送信",editProviderToChangeDigestTime:"プロバイダーを編集してダイジェスト時刻を変更",edit:"編集",deleteProvider:"通知プロバイダーを削除",deleteConfirm:'"{{name}}"を削除してもよろしいですか？この操作は取り消せません。',delete:"削除",addTitle:"通知プロバイダーを追加",editTitle:"通知プロバイダーを編集",nameLabel:"名前 *",namePlaceholder:"マイ通知",providerTypeLabel:"プロバイダータイプ *",configuration:"設定",testConfiguration:"設定をテスト",printerFilter:"プリンターフィルター",onlyFromPrinter:"このプリンターからのイベントのみ通知を送信",quietHoursDnd:"静音時間（おやすみモード）",quietStart:"開始",quietEnd:"終了",dailyDigestLabel:"デイリーダイジェスト",sendDigestAt:"ダイジェスト送信時刻",digestCollected:"イベントが収集され、この時刻にまとめて送信されます",notificationEvents:"通知イベント",progressPercent:"（25%、50%、75%）",bedCooledAfterPrint:"（印刷完了後）",eventPriority:{sectionTitle:"ntfy 優先度",helpNtfy:"有効な各イベントに優先度を選択してください。ntfy はこれを使って通知の挙動（音、表示、プッシュ動作）を切り替えます。ここで設定していないレベルは ntfy サーバーのデフォルトを使用します。",min:"最小",low:"低",default:"デフォルト",high:"高",urgent:"緊急"},cancel:"キャンセル",save:"保存",add:"追加",nameRequired:"名前は必須です",fieldRequired:"{{field}}は必須です",phoneNumber:"電話番号",apiKey:"APIキー",serverUrl:"サーバーURL",topic:"トピック",authToken:"認証トークン",userKey:"ユーザーキー",appToken:"アプリトークン",priority:"優先度",botToken:"ボットトークン",chatId:"チャットID",smtpServer:"SMTPサーバー",smtpPort:"SMTPポート",security:"セキュリティ",authentication:"認証",username:"ユーザー名",password:"パスワード",fromEmail:"送信元メール",toEmail:"宛先メール",webhookUrl:"WebhookのURL",payloadFormat:"ペイロード形式",authorization:"認可",titleFieldName:"タイトルフィールド名",messageFieldName:"メッセージフィールド名",editTemplate:"テンプレートを編集: {{name}}",titleLabel:"タイトル",bodyLabel:"本文",titlePlaceholder:"通知タイトル...",bodyPlaceholder:"通知本文...",availableVariables:"利用可能な変数",clickToInsert:"クリックして本文のカーソル位置に挿入",livePreview:"ライブプレビュー",hide:"非表示",show:"表示",loadingPreview:"プレビューを読み込み中...",enterTemplateContent:"テンプレートの内容を入力するとプレビューが表示されます",titlePreview:"タイトル:",bodyPreview:"本文:",resetToDefault:"デフォルトにリセット",titleRequired:"タイトルは必須です",bodyRequired:"本文は必須です",notificationLog:"通知ログ",showFailedOnly:"失敗のみ",last24Hours:"過去24時間",last7Days:"過去7日間",last30Days:"過去30日間",last90Days:"過去90日間",justNow:"たった今",noFailedNotifications:"失敗した通知はありません",noNotificationsLogged:"記録された通知はありません",unknownProvider:"不明なプロバイダー",logTitle:"タイトル",logMessage:"メッセージ",logError:"エラー",logProvider:"プロバイダー: {{type}}",logTime:"時刻: {{time}}",refresh:"更新",clearOld:"古いものを削除",statsSummary:"過去{{days}}日間:",statsNotifications:"通知",statsSent:"{{count}}件送信",statsFailed:"{{count}}件失敗",eventTypes:{print_start:"印刷開始",print_complete:"印刷完了",print_failed:"印刷失敗",print_stopped:"印刷停止",print_progress:"進捗",printer_offline:"プリンターオフライン",printer_error:"プリンターエラー",filament_low:"フィラメント残量低下",maintenance_due:"メンテナンス期限",test:"テスト"},userEmail:{title:"通知",emailNotifications:"メール通知",emailNotificationsDesc:"自分の印刷ジョブに対してメール通知を受け取ります。メールは高度な認証で設定されたSMTP設定を使用して送信されます。",sendingTo:"通知の送信先",noEmailWarning:"アカウントにメールアドレスが設定されていません。管理者に連絡して追加してもらってください。",printJobNotifications:"印刷ジョブ通知",printJobNotificationsDesc:"送信した印刷ジョブのどのイベントでメール通知を送るかを選択します。",printJobStarts:"印刷ジョブ開始",printJobStartsDesc:"印刷ジョブが開始されたときに通知を受け取る。",printJobFinishes:"印刷ジョブ完了",printJobFinishesDesc:"印刷ジョブが正常に完了したときに通知を受け取る。",printErrors:"印刷エラー",printErrorsDesc:"印刷ジョブが失敗またはエラーが発生したときに通知を受け取る。",printJobStops:"印刷ジョブ停止",printJobStopsDesc:"印刷ジョブがキャンセルまたは停止されたときに通知を受け取る。",saveSuccess:"通知設定を保存しました。",saveError:"通知設定の保存に失敗しました。"}},richTextEditor:{bold:"太字",italic:"斜体",underline:"下線",bulletList:"箇条書きリスト",numberedList:"番号付きリスト",alignLeft:"左揃え",alignCenter:"中央揃え",alignRight:"右揃え",addLink:"リンクを追加",removeLink:"リンクを削除"},externalLinks:{noLinksConfigured:"外部リンクが設定されていません",deleteLink:"リンクを削除",removeCustomIcon:"カスタムアイコンを削除",openInNewTab:"新しいタブで開く",placeholders:{linkName:"マイリンク"}},keyboardShortcuts:{title:"キーボードショートカット",navigation:"ナビゲーション",archivesSection:"アーカイブ",kProfilesSection:"Kプロファイル",generalSection:"全般",shortcuts:{goToPrinters:"プリンターへ移動",goToArchives:"アーカイブへ移動",goToQueue:"キューへ移動",goToStats:"統計へ移動",goToProfiles:"クラウドプロファイルへ移動",goToSettings:"設定へ移動",focusSearch:"検索にフォーカス",openUploadModal:"アップロードモーダルを開く",clearSelection:"選択をクリア / 入力をぼかす",contextMenu:"カードのコンテキストメニュー",refreshProfiles:"プロファイルを更新",newProfile:"新しいプロファイル",exitSelectionMode:"選択モードを終了",showHelp:"このヘルプを表示"},footer:"Escキーを押すか外側をクリックして閉じます"},notificationLog:{title:"通知ログ",events:{printStarted:"印刷開始",printComplete:"印刷完了",printFailed:"印刷失敗",printStopped:"印刷停止",progress:"進捗",printerOffline:"プリンターオフライン",printerError:"プリンターエラー",lowFilament:"フィラメント残量低下",maintenanceDue:"メンテナンス期限",test:"テスト"},timeAgo:{justNow:"たった今",minutesAgo:"{{minutes}}分前",hoursAgo:"{{hours}}時間前"}},restoreBackup:{title:"バックアップを復元",restoring:"復元中...",restoreComplete:"復元完了",restoreFailed:"復元失敗",importSettings:"バックアップファイルから設定をインポート",pleaseWait:"データの復元中です。しばらくお待ちください",clickToSelect:"クリックしてバックアップファイルを選択（.jsonまたは.zip）",howDuplicateHandling:"重複の処理方法:",categories:{printers:"プリンター",smartPlugs:"スマートプラグ",notificationProviders:"通知プロバイダー",filaments:"フィラメント",archives:"アーカイブ",pendingUploads:"保留中のアップロード",settingsTemplates:"設定とテンプレート"},matchingInfo:{printers:"シリアル番号で照合",smartPlugs:"IPアドレスで照合",notificationProviders:"名前で照合",filaments:"名前+タイプ+ブランドで照合",archives:"コンテンツハッシュで照合",pendingUploads:"ファイル名で照合",settingsTemplates:"常に上書き"},replaceExisting:"既存データを置き換え",keepExisting:"既存データを保持",replaceDescription:"既に存在するアイテムをバックアップデータで上書き",keepDescription:"まだ存在しないアイテムのみを復元",caution:"注意:",cautionText:"上書きすると現在の構成がバックアップデータに置き換えられます。セキュリティ上の理由から、プリンターのアクセスコードは上書きされません。",itemsRestored:"復元されたアイテム",itemsSkipped:"スキップされたアイテム",restored:"復元済み",skipped:"スキップ（既に存在）",filesLabel:"ファイル（3MF、サムネイルなど）",newApiKeysGenerated:"新しいAPIキーが生成されました",newApiKeysWarning:"これらのキーは一度だけ表示されます。今すぐコピーしてください！",processingBackup:"バックアップファイルを処理中...",noDataFound:"バックアップファイルに復元するデータが見つかりませんでした。",failedToRestore:"バックアップの復元に失敗しました。ファイル形式を確認してください。"},backupExport:{title:"バックアップをエクスポート",selectData:"含めるデータを選択",selectAll:"すべて選択",selectNone:"なし",categoryDescriptions:{settings:"言語、テーマ、更新設定",notifications:"ntfy、Pushover、Discordなど",templates:"カスタムメッセージテンプレート",smartPlugs:"Tasmotaプラグ設定",externalLinks:"サイドバーの外部サービスへのリンク",printers:"プリンター情報（アクセスコード除外）",plateDetection:"空プレート参照画像",filaments:"フィラメントの種類とコスト",maintenance:"カスタムメンテナンススケジュール",archives:"すべての印刷データ+ファイル（3MF、サムネイル、写真）",projects:"プロジェクト、BOMアイテム、添付ファイル",pendingUploads:"仮想プリンターアップロード待機中",apiKeys:"Webhook APIキー（インポート時に新しいキーが生成されます）"},requiresPrinters:"プリンターを選択する必要があります",zipFileWarning:"ZIPファイルが作成されます。",zipFileDescription:"すべての3MFファイル、サムネイル、タイムラプス、写真が含まれます。これには時間がかかり、大きなファイルになる可能性があります。",includeAccessCodes:"アクセスコードを含める",includeAccessCodesDescription:"別のマシンへの転送用",includeAccessCodesWarning:"アクセスコードはプレーンテキストで含まれます。このバックアップファイルを安全に保管してください！",categoriesSelected:"{{selectedCount}}カテゴリー選択済み"},pendingUploads:{placeholders:{notes:"この印刷に関するメモを追加..."},discardUpload:"アップロードを破棄",archiveAllUploads:"すべてのアップロードをアーカイブ",discardAllUploads:"すべてのアップロードを破棄",archive:"アーカイブ",timeAgo:{justNow:"たった今",minutesAgo:"{{minutes}}分前",hoursAgo:"{{hours}}時間前",daysAgo:"{{days}}日前"}},apiBrowser:{placeholders:{requestBody:"JSONリクエストボディ...",searchEndpoints:"エンドポイントを検索..."}},configureAmsSlot:{title:"AMSスロットの設定",slotConfigured:"スロットを設定しました！",configuringSlot:"スロットを設定中：",slotLabel:"{{ams}} スロット {{slot}}",searchPresets:"プリセットを検索...",colorPlaceholder:"色名またはHex（例: 茶色、FF8800）",clearCustomColor:"カスタム色をクリア",noCloudPresets:"クラウドプリセットがありません。Bambu Cloudにログインして同期してください。",noPresetsAvailable:"プリセットがありません。Bambu Cloudにログインするか、ローカルプロファイルをインポートしてください。",noMatchingPresets:"一致するプリセットが見つかりません。",custom:"カスタム",builtin:"内蔵",settingsSentToPrinter:"設定をプリンターに送信しました",filamentProfile:"フィラメントプロファイル",kProfileLabel:"Kプロファイル（Pressure Advance）",filteringFor:"フィルター中: {{material}}",noKProfile:"Kプロファイルなし（デフォルト0.020を使用）",noMatchingKProfiles:"一致するKプロファイルが見つかりません。デフォルトK=0.020が使用されます。",selectFilamentFirst:"まずフィラメントプロファイルを選択してください",kFromCalibration:"K={{value}}（プリンターキャリブレーションから）",customColorLabel:"カスタム色（オプション）",presetColors:"{{name}}の色：",showLessColors:"色を減らす",showMoreColors:"色をもっと表示",clear:"クリア",hexLabel:"16進: #{{hex}}",resetting:"リセット中...",resetSlot:"スロットをリセット",cancel:"キャンセル",configuring:"設定中...",configureSlot:"スロットを設定"},githubBackup:{title:"Gitバックアップ",history:"履歴",downloadBackup:"バックアップをダウンロード",restoreBackup:"バックアップを復元",noBackupsYet:"バックアップはまだありません"},emailSettings:{placeholders:{fromName:"Bambuddy"}},tagManagement:{searchTags:"タグを検索...",renameTag:"タグ名を変更",deleteTag:"タグを削除"},notificationTemplates:{placeholders:{title:"通知タイトル...",body:"通知本文..."}},batchTag:{placeholders:{newTag:"新しいタグを入力..."}},photoGallery:{deletePhoto:"写真を削除"},filamentHoverCard:{copySpoolUuid:"スプールUUIDをコピー"},kProfilesView:{hasNote:"メモあり",copyProfile:"プロファイルをコピー"},layout:{openMenu:"メニューを開く",noPermissionSystemInfo:"システム情報を表示する権限がありません"},dashboard:{dragToReorder:"ドラッグして並べ替え",hideWidget:"ウィジェットを非表示"},notificationProviderCard:{deleteNotificationProvider:"通知プロバイダーを削除"},fileManagerModal:{closeFileManager:"ファイルマネージャーを閉じる",sortFiles:"ファイルを並べ替え",goToParentFolder:"親フォルダーへ移動",threeView:"3Dビュー"},embeddedCameraViewer:{refreshStream:"ストリームを更新",close:"閉じる",zoomOut:"ズームアウト",resetZoom:"ズームをリセット",zoomIn:"ズームイン",dragToResize:"ドラッグしてサイズ変更"},timelapseViewer:{skipBack5s:"5秒戻る",skipForward5s:"5秒進む"},notificationProviders:{descriptions:{email:"SMTP電子メール通知",telegram:"Telegramボット経由の通知",discord:"Webhookを介してDiscordチャンネルに送信",ntfy:"無料でセルフホスト可能なプッシュ通知",pushover:"シンプルで信頼性の高いプッシュ通知",callmebot:"CallMeBot経由の無料WhatsApp通知",webhook:"任意のURLへのジェネリックHTTP POST"}},logViewer:{searchPlaceholder:"メッセージまたはロガー名を検索...",noLogEntries:"ログエントリが見つかりません"},switchbarPopover:{noSwitchesInSwitchbar:"スイッチバーにスイッチがありません"},projectPageModal:{placeholders:{title:"タイトル",designer:"デザイナー",license:"ライセンス",description:"説明を入力...",profileTitle:"プロファイルタイトル",profileDescription:"プロファイルの説明..."}},spoolmanSettings:{},time:{unknown:"-",waiting:"待機中",justNow:"たった今",now:"今すぐ",minsAgo:"{{count}}分前",inMins:"あと{{count}}分",hoursAgo:"{{count}}時間前",inHours:"あと{{count}}時間",daysAgo:"{{count}}日前",inDays:"あと{{count}}日"},spoolbuddy:{nav:{dashboard:"ダッシュボード",ams:"AMS",inventory:"インベントリ",writeTag:"書込み",settings:"設定"},status:{nfcReady:"NFC準備完了",nfcOff:"NFCオフ",offline:"オフライン",online:"オンライン",noPrinters:"プリンターなし",deviceOffline:"デバイスオフライン",waitingConnection:"デバイス接続を待っています...",systemReady:"システム準備完了",status:"ステータス"},dashboard:{readyToScan:"スキャン準備完了",idleMessage:"スプールを計量台に置いて識別します",nfcHint:"NFCタグは自動的に読み取られます",device:"デバイス",syncWeight:"重量同期",weightSynced:"同期完了！",unknownTag:"不明なタグ",newTag:"新しいタグを検出",onScale:"計量中",linkSpool:"スプールにリンク",linkTagTitle:"タグをスプールにリンク",linkTag:"タグをリンク",selectSpool:"このタグにリンクするスプールを選択:",noUntagged:"タグなしのスプールが見つかりません",tagDetected:"タグ検出",noTag:"タグなし",tagId:"タグ",grossWeight:"総重量",spoolSize:"スプールサイズ",close:"閉じる",currentSpool:"現在のスプール",plateReady:"プレート準備完了: {{name}}",plateReadyLabel:"片付け待ちプレート",plateClearAction:"片付け",plateClearedToast:"プレートを片付け済みにしました",plateClearFailed:"プレートを片付け済みにできませんでした"},modal:{spoolDetected:"スプール検出",assignToAms:"AMSに割り当て",syncWeight:"重量同期",weightSynced:"同期完了！",syncing:"同期中...",newTagDetected:"新しいタグを検出",addToInventory:"インベントリに追加",assignToAmsTitle:"AMSに割り当て",selectSlot:"スロットを選択",assign:"割り当て",assigning:"割り当て中...",assignSuccess:"割り当て完了！",assignPendingInsert:"割り当てました。スプールを挿入したときにスロットが設定されます。",assignError:"スプールの割り当てに失敗しました。再試行してください。",noPrinterSelected:"プリンターを選択...",noAmsDetected:"このプリンターにAMSが検出されません",slot:"スロット"},weight:{noReading:"読み取りなし",stable:"安定",measuring:"計測中...",tare:"風袋引き",calibrate:"キャリブレーション"},spool:{remaining:"残量",material:"素材",brand:"ブランド",color:"色",coreWeight:"コア",labelWeight:"ラベル",scaleWeight:"計量",netWeight:"正味",lastUsed:"最終使用"},ams:{noData:"AMSが検出されません",connectAms:"AMSを接続してスロットを表示",noPrinter:"プリンター未選択",selectPrinter:"上部バーからプリンターを選択",printerDisconnected:"プリンター切断",humidity:"湿度",level:"レベル",active:"アクティブ",slot:"スロット",empty:"空"},inventory:{search:"スプールを検索...",empty:"インベントリにスプールがありません",noResults:"一致するスプールがありません",spools:"スプール",addSpool:"スプール追加"},settings:{tabDevice:"デバイス",tabDisplay:"ディスプレイ",tabScale:"計量",tabUpdates:"アップデート",nfcReader:"NFCリーダー",type:"タイプ",connection:"接続",notConnected:"該当なし",deviceInfo:"デバイス情報",hostname:"ホスト",uptime:"稼働時間",brightness:"明るさ",saved:"保存済み",noBacklight:"DSIバックライトが検出されませんでした。明るさ制御にはDSIディスプレイが必要です。",screenBlank:"画面オフタイムアウト",screenBlankDesc:"操作がないと画面がオフになります。タッチで復帰。",displayNote:"明るさはソフトウェアフィルターとして適用されます。",scaleCalibration:"計量キャリブレーション",currentWeight:"現在の重量",tareOffset:"風袋",calFactor:"係数",knownWeight:"既知の重量",calStep1:"計量台からすべてのアイテムを取り除き、ゼロ設定を押してください。",calStep2:"既知の重量を計量台に置いてください。",setZero:"ゼロ設定",calibrateNow:"キャリブレーション",calibrated:"キャリブレーション済み",tareSet:"風袋コマンドを送信しました。デバイスを待っています...",tareComplete:"風袋が完了しました！",tareTimedOut:"風袋がタイムアウトしました — SpoolBuddy デーモンは起動していますか？",tareFailed:"風袋コマンドの送信に失敗しました",zeroSet:"ゼロ点を設定しました。既知の重量を計量台に置いてください。",calibrationDone:"キャリブレーション完了！",calibrationFailed:"キャリブレーションに失敗しました",lastCalibrated:"最終キャリブレーション",stable:"安定",settling:"安定化中...",firmware:"ファームウェア",scale:"計量",noDevice:"SpoolBuddyデバイスが見つかりません",daemonVersion:"デーモンバージョン",currentVersion:"現在",versionPending:"デーモンを待っています...",checking:"確認中...",checkUpdates:"アップデートを確認",updateAvailable:"アップデートあり",updateInstructions:"SSH経由で更新：SpoolBuddyインストールスクリプトを実行してください。",upToDate:"最新です",includeBeta:"ベータ版を含む",systemConfig:"バックエンドと認証",backendUrl:"BambuddyバックエンドURL",apiToken:"APIトークン",apiTokenPlaceholder:"APIトークンを入力",saveConfig:"設定を保存",systemQueued:"設定をキューに追加しました。",systemFieldsRequired:"バックエンドURLは必須です。",nfcDiagnostic:"NFC診断",scaleDiagnostic:"スケール診断",readTagDiagnostic:"タグ読み取り診断",testNfc:"リーダーをテスト",testScale:"精度をテスト",testReadTag:"タグを読み取り"},writeTag:{tabExisting:"既存のスプール",tabNew:"新規スプール",tabReplace:"タグ交換",searchPlaceholder:"素材、色、ブランドで検索...",noUntaggedSpools:"タグなしのスプールがありません",noTaggedSpools:"タグ付きのスプールがありません",selectSpool:"スプールを選択し、NTAGをリーダーに置いてください",placeTag:"NTAGをリーダーに置いてください",tagReady:"タグ検出 — 書込み準備完了",writeTag:"タグ書込み",replaceTag:"タグ交換",writing:"タグ書込み中...",waiting:"SpoolBuddyを待機中...",writeSuccess:"タグの書込みが完了しました！",writeFailed:"書込み失敗",queueFailed:"書込みコマンドのキューに失敗しました",tryAgain:"再試行",cancel:"キャンセル",replaceWarning:"古いタグのリンクが解除され、新しいタグに置き換わります。",deviceOffline:"SpoolBuddyはオフラインです",material:"素材",colorName:"色名",color:"色",brand:"ブランド",weight:"重量 (g)",createSpool:"スプール作成",creating:"作成中...",spoolCreated:"スプール作成完了！書込み準備ができました。",createFailed:"スプールの作成に失敗しました",incompleteDataWarning:"不完全なSpoolmanデータでタグを書き込みました"},quickMenu:{printerPower:"プリンター電源",systemControls:"システム",restartDaemon:"デーモン再起動",restartBrowser:"ブラウザ再起動",reboot:"再起動",shutdown:"シャットダウン",swipeToClose:"下にスワイプして閉じる",confirmTitle:"確認",confirmShutdown:"SpoolBuddyをシャットダウンしますか？再起動するには物理的なアクセスが必要です。",confirmReboot:"SpoolBuddyを再起動しますか？",confirmRestartDaemon:"SpoolBuddyデーモンを再起動しますか？NFCとスケールが一時的に使用できなくなります。",confirmRestartBrowser:"キオスクブラウザを再起動しますか？画面が一時的に暗くなります。",confirm:"確認",confirmPlugOn:"{{name}}をオンにしますか？",confirmPlugOff:"{{name}}をオフにしますか？",turnOn:"オン",turnOff:"オフ"}},diagnostic:{modalTitle:"接続診断 — {{name}}",running:"診断を実行中...",runningElapsed:"診断を実行中... ({{elapsed}}秒)",waitingForReportHint:"プリンターがステータスレポートを送信するのを待っています — 最大 {{max}} 秒かかる場合があります。",runFailed:"診断を実行できませんでした: {{error}}",retry:"再実行",runButton:"診断を実行",sectionTitle:"接続診断",sectionDescription:"プリンターが接続できない、または印刷できない原因を確認します — ポートの到達性、LAN開発者モード、Dockerネットワークモード、認証情報。",noPrinters:"プリンターが設定されていません。",overall:{ok:"問題は見つかりませんでした — プリンター接続は正常のようです。",warnings:"プリンターは動作するはずですが、いくつかの点に注意が必要です。",problems:"プリンターが接続できない、または印刷できない原因となる問題が見つかりました。"},check:{port_mqtt:{title:"制御ポート (MQTT 8883)",pass:"到達可能 — プリンターは制御接続を受け付けています。",fail:"ポート8883に到達できません。プリンターの電源が切れている、IPアドレスが異なる、またはファイアウォールがブロックしています。プリンターのIPと、ポート8883が何にもブロックされていないことを確認してください。"},port_ftps:{title:"ファイル転送ポート (FTPS 990)",pass:"到達可能 — 印刷ファイルの送信は機能します。",warn:"ポート990に到達できません。監視は引き続き機能する場合がありますが、プリンターへの印刷送信は失敗します。ポート990がブロックされていないことを確認してください。"},port_rtsps:{title:"カメラポート (RTSPS 322)",pass:"到達可能 — カメラストリームは機能します。",warn:"ポート322に到達できません。ライブカメラ表示は機能しません。これは印刷には影響しません。"},network_mode:{title:"Dockerネットワークモード",pass:"ホストネットワークモードで実行中です。",warn:'BambuddyはDockerブリッジネットワークで実行されています。プリンター検出と仮想プリンターにはホストネットワークモードが必要です — "network_mode: host" でコンテナを再作成してください。',skip:"Dockerで実行されていません — 該当しません。"},subnet:{title:"ネットワークサブネット",pass:"プリンターとBambuddyは同じサブネットにあります。",warn:"プリンター ({{printer_ip}}) とBambuddy ({{host_ip}}) は異なるサブネットにあります。サブネット間のルーティングが設定されていない限り、互いに到達できない可能性があります。",skip:"サブネットを判定できませんでした — スキップしました。"},mqtt_auth:{title:"プリンター認証情報",pass:"プリンターが接続を受け入れました。",fail:"プリンターには到達できますが、接続を拒否されました。アクセスコードまたはシリアル番号が間違っている可能性が高いです。アクセスコードは開発者モードを切り替えるたびに変わります — プリンター画面から再度コピーしてください。",skip:"未確認 — プリンターに到達できませんでした。"},developer_mode:{title:"LAN開発者モード",pass:"開発者モードは有効です。",fail:"プリンターの開発者モードがオフです。プリンターのLAN設定で有効にし、OKで確定してください。これがないと印刷は開始されません。",skip:"確認できませんでした — プリンターへのアクティブな接続が必要です。"},printer_publishing:{title:"プリンターがステータスを送信中",pass:"プリンターはステータス更新を送信しています — AMS、フィラメント、Kプロファイルがスライサーに正しくミラーされます。",fail:"MQTTブローカーは接続を受け付けましたが、プリンターはステータスレポートを一切送信していません。ほぼ常にシリアル番号の誤りまたは大文字小文字の不一致が原因です — device/<serial>/report トピックは大文字小文字を区別します。プリンター設定のシリアル番号をプリンター本体の画面表示と照合してください。",skip:"確認できませんでした — プリンターへのアクティブな接続が必要です。"}}},systemHealth:{sectionTitle:"システムの状態",sectionDescription:"最近のログから既知の問題を検出します。サポートに問い合わせる前に、多くは自分で解決できます。",rescan:"再スキャン",clean:"直近 {{times}} 件のログに既知の問題は見つかりませんでした。",logUnavailable:"ファイルへのログ記録が無効になっているため、ログをスキャンできません。このチェックを使うにはファイルログを有効にしてください。",learnMore:"対処方法",fixLabel:"対処:",occurrences:"{{times}} 回発生 — 最終 {{lastSeen}}",category:{layer8:"自分で解決できます",environment:"環境",bug:"報告してください"},signature:{"ftp-auth-rejected":{name:"プリンターがアクセスコードを拒否しました",cause:"プリンターがファイル転送のログインを拒否しました。アクセスコードが間違っているか、開発者モードの切り替え後に変更されています。",fix:"プリンター画面（LAN設定）からアクセスコードをコピーし直し、Bambuddy のプリンター設定で更新してください。"},"ftp-connection-timeout":{name:"ファイル転送の接続がタイムアウトしました",cause:"Bambuddy がプリンターのファイル転送ポート（FTPS 990）に到達できませんでした。ポートがブロックされているか、プリンターの電源が切れているか、別のサブネットにあります。",fix:"Bambuddy とプリンターの間でポート 990 がブロックされていないこと、両者が同じネットワークにあることを確認してください。"},"ftp-ssl-error":{name:"セキュアなファイル転送のハンドシェイクに失敗しました",cause:"プリンターのファイル転送サーバーとの TLS ハンドシェイクに失敗しました。多くはファイアウォールか、プリンターのファームウェアが古いことが原因です。",fix:"プリンターのファームウェアを更新し、ファイアウォールやプロキシがポート 990 の接続を妨げていないか確認してください。"},"mqtt-connection-flapping":{name:"プリンター接続が繰り返し切断されます",cause:"制御接続（MQTT 8883）が切断と再接続を繰り返しています。通常はネットワークが弱いか、ポートが部分的にブロックされていることが原因です。",fix:"プリンター付近の Wi-Fi 信号を確認し、できれば有線接続を使用し、ポート 8883 が安定して到達できることを確認してください。"},"camera-connection-refused":{name:"カメラ映像に接続できません",cause:"ポート RTSPS 322 でライブカメラに到達できませんでした。ポートがブロックされているか、プリンターのカメラまたは LAN ライブビューが無効になっています。",fix:"プリンターのカメラと LAN ライブビューを有効にし、ポート 322 がブロックされていないか確認してください。これは印刷には影響しません。"},"database-locked":{name:"データベースの書き込み競合",cause:'負荷時に SQLite データベースで "database is locked" エラーが発生しています。複数のプリンターを同時に使用する場合によく起こります。',fix:"Bambuddy を外部の PostgreSQL データベースに切り替えてください。ドキュメントの PostgreSQL ガイドを参照してください。"}}},vpDiagnostic:{title:"セットアップチェック — {{name}}",runButton:"セットアップチェックを実行",running:"セットアップチェックを実行中...",runFailed:"セットアップチェックを実行できませんでした: {{error}}",retry:"再実行",overall:{ok:"すべてのチェックに合格しました — この仮想プリンターは正しく設定されています。",warnings:"仮想プリンターは動作するはずですが、いくつかの点に注意が必要です。",problems:"スライサーがこの仮想プリンターを認識または使用できない理由となる問題が見つかりました。"},check:{enabled:{title:"仮想プリンターが有効",fail:"この仮想プリンターはオフです。検出可能にするにはオンに切り替えてください。"},running:{title:"サービスが稼働中",fail:"仮想プリンターは有効ですが、サービスが稼働していません。Bambuddy のログを確認してください — 通常はバインド IP の競合または権限エラーが原因で停止します。"},bind_interface:{title:"バインドネットワークインターフェース",fail:"バインドインターフェースが設定されていないか、このホストに存在しなくなっています。「バインドインターフェース」のドロップダウンから現在のインターフェースを選択してください。"},access_code:{title:"アクセスコードが設定済み",fail:"アクセスコードが設定されていません。ここで設定したものと同じ 8 文字のアクセスコードをスライサーに入力する必要があります。"},target_printer:{title:"ターゲットプリンター",fail:"ターゲットプリンターが選択されていません。プロキシモードには転送先となる実際のプリンターが必要です。",warn:"ターゲットプリンターは現在オフラインです — 再接続されると転送が再開されます。"},port_ftps:{title:"ファイルアップロードサービス（ポート {{port}}）",fail:"バインド IP のポート {{port}} で待ち受けているものがないため、スライサーはファイルをアップロードできません。通常はこのインターフェースでのポート競合が原因です。"},port_mqtt:{title:"制御サービス（ポート {{port}}）",fail:"バインド IP のポート {{port}} で待ち受けているものがないため、スライサーは接続もステータス表示もできません。"},port_bind:{title:"検出サービス（ポート {{port}}）",fail:"バインド IP のポート {{port}} で待ち受けているものがないため、スライサーの検出ハンドシェイクが失敗します。"},certificate:{title:"TLS 証明書",pass:"証明書の準備ができています。Bambuddy CA 証明書（上記）がスライサーの信頼ストアにインポートされていることを確認してください。",fail:"この仮想プリンターの TLS 証明書がありません。Bambuddy のデータディレクトリが書き込み可能か確認してください。"}}},bugReport:{logHealthSummary:"ログから既知の問題が見つかりました",logHealthIntro:"最近のログが既知の問題と一致しています。下記の対処方法をご確認ください。解決すればバグ報告なしで問題が解消する可能性があります。下からバグ報告を送ることもできます。",title:"バグを報告",description:"説明",descriptionPlaceholder:"何が問題でしたか？問題を説明してください...",email:"メールアドレス（任意）",emailPlaceholder:"your@email.com",emailPrivacy:"入力された場合、メールアドレスはGitHub Issueの折りたたみセクションに含まれ、メンテナーがフォローアップできるようになります。",screenshot:"スクリーンショット",uploadOrPaste:"画像をアップロード、貼り付け、またはドラッグ",dataCollectedSummary:"レポートに含まれるデータは？",dataIncluded:"含まれるもの:",dataIncludedList:"アプリバージョン、OS、アーキテクチャ、Pythonバージョン、データベース統計（件数のみ）、プリンターモデル、ノズル数、ファームウェアバージョン、接続状態、統合状態（Spoolman、MQTT、HA）、非機密設定、ネットワークインターフェース数、Docker詳細、依存関係バージョン。",dataNeverIncluded:"含まれないもの:",dataNeverIncludedList:"プリンター名、シリアル番号、アクセスコード、パスワード、IPアドレス、メールアドレス、APIキー、トークン、Webhook URL、ホスト名、ユーザー名。",submit:"送信",startLogging:"デバッグログ開始",stepEnableLogging:"デバッグログ有効",stepReproduce:"問題を再現してください",stepStopLogging:"停止してレポート送信",stopAndSubmit:"停止して送信",maxDuration:"{{minutes}}分後に自動停止",stoppingLogs:"ログ収集・送信中...",submitting:"バグレポートを送信中...",submittingStepConnection:"プリンターの接続確認を実行中",submittingStepVirtualPrinters:"仮想プリンターのセットアップ確認を実行中",submittingStepLogScan:"最近のログから既知の問題をスキャン中",submittingStepSubmit:"GitHub にレポートを送信中",submitSuccess:"バグレポートが正常に送信されました！",submitFailed:"バグレポートの送信に失敗しました",diagnosticChecking:"プリンター接続を確認中...",diagnosticHealthy:"接続チェックに合格しました — プリンターに問題は見つかりませんでした。",diagnosticSummary:"{{total}} 台中 {{problems}} 台のプリンターに接続の問題があります",diagnosticIntro:"1 台以上のプリンターに接続の問題があり、それが今回の問題の原因である可能性があります。下記のプリンターを展開して対処法を確認してください — それを解決すれば、バグ報告なしで問題が解決するかもしれません。下記から報告を送信することもできます。",thankYou:"ありがとうございます！",submitted:"バグレポートが送信されました。",viewIssue:"Issueを表示",unexpectedError:"予期しないエラーが発生しました"},failureDetection:{title:"AI 失敗検出",description:"セルフホストされた Obico ML API で印刷を監視し、検出された失敗に自動的に対応します。",mlUrl:"Obico ML API の URL",mlUrlHint:"セルフホストした Obico ml_api コンテナのベース URL (例: http://192.168.1.10:3333)。",test:"テスト",testSuccess:"ML API に接続でき、正常です。",testFailed:"ML API に接続できませんでした。",sensitivity:"感度",sensitivityLow:"低(誤検出が少ない)",sensitivityMedium:"中(バランス型)",sensitivityHigh:"高(早期検出、誤検出が増加)",sensitivityHint:"警告と失敗をトリガーする信頼度のしきい値を調整します。",action:"失敗検出時の動作",actionNotify:"通知のみ",actionPause:"印刷を一時停止",actionPauseOff:"一時停止して電源を切る",pollInterval:"ポーリング間隔(秒)",pollIntervalHint:"印刷中に各プリンターをチェックする頻度。最小 5 秒、最大 120 秒。",externalUrlMissing:"外部URLが設定されていません。",externalUrlHint:"ML APIはURLでカメラスナップショットを取得します。MLAPIコンテナがBambuddyに到達できるよう、一般設定で外部URLを設定してください。",perPrinterTitle:"監視対象プリンター",perPrinterHint:"検出サービスが監視するプリンターを選択します。",monitorAll:"接続されているすべてのプリンターを監視",statusTitle:"ステータス",serviceRunning:"サービス稼働中",thresholds:"低 / 高しきい値",activePrinters:"アクティブな印刷",noActivePrints:"現在、実行中の印刷はありません。",historyTitle:"最近の検出",noHistory:"まだ検出はありません。"},makerworld:{title:"MakerWorld",description:"MakerWorld モデルの URL を貼り付けると、Bambu Handy アプリを開かなくても Bambuddy から直接インポート・印刷できます。",pasteUrlHeader:"MakerWorld からインポート",pasteUrlPlaceholder:"https://makerworld.com/en/models/… または任意の MakerWorld リンク",resolveButton:"読み込む",signInRequiredTitle:"ダウンロードには Bambu Cloud へのサインインが必要です",signInRequiredBody:"モデルの詳細は匿名で閲覧できますが、3MF ファイルをダウンロードするには Bambu Cloud アカウントが必要です。",openCloudSettings:"Cloud 設定を開く",untitledModel:"無題のモデル",byCreator:"作成者: {{name}}",downloadsCount:"ダウンロード数: {{count}}",licensePrefix:"ライセンス",alreadyImported:"ライブラリに登録済み",openOnMakerworld:"MakerWorld で開く",alreadyInLibrary:"このモデルはすでにライブラリにあります — ファイルマネージャー → MakerWorld で確認できます",importSuccess:"{{filename}} をインポートしました — ファイルマネージャー → MakerWorld に保存済み",platesHeader:"プレート ({{count}})",plateDefaultName:"プレート {{n}}",materialCount:"フィラメント {{count}} 本",amsRequired:"AMS が必要",slicedFor:"{{printer}}用にスライス済み",alsoCompatible:"互換性ありとも記録: {{printers}}",importToLibrary:"保存",sliceIn:"保存して {{slicer}} でスライス",disclaimer:"MakerWorld 連携はコミュニティで文書化された API エンドポイントを使用しています。Bambuddy は MakerWorld または Bambu Lab との提携・承認関係はありません。",lastImportSuccess:"ライブラリにインポートしました",lastImportAlreadyInLibrary:"既にライブラリに存在します",viewInLibrary:"ファイルマネージャーで表示",openInBambuStudio:"Bambu Studio で開く",openInOrcaSlicer:"OrcaSlicer で開く",importTo:"ファイルマネージャーへのインポート先",recentImportsHeader:"最近のインポート",phaseResolving:"解決中",phaseDownloading:"ダウンロード中",folderAuto:"MakerWorld (デフォルト)",importAll:"すべてインポート",importAllProgress:"インポート中 {{current}}/{{total}}",openGallery:"画像ギャラリーを開く",galleryPrev:"前の画像",galleryNext:"次の画像",deleteImport:"ライブラリから削除",importDeleting:"削除中…",importDeleted:"ライブラリから削除しました",confirmDelete:"{{filename}} をライブラリから削除しますか？ローカルファイルは削除されますが、MakerWorld から再インポートできます。",errors:{resolveFailed:"この MakerWorld URL を解決できませんでした。",downloadFailed:"ダウンロードに失敗しました。もう一度お試しください。",deleteFailed:"ライブラリからファイルを削除できませんでした。"}},gcodeViewer:{back:"戻る",backToArchives:"印刷アーカイブに戻る",backToFiles:"ファイル管理に戻る"},libraryTrash:{title:"ゴミ箱",headerButton:"ゴミ箱",headerTooltip:"ゴミ箱に移動したファイルを表示",backToFiles:"ファイルマネージャーに戻る",subtitleAdmin:"削除されたファイルは {{days}} 日間ゴミ箱に残り、その後自動的に削除されます。このビューには全ユーザーのゴミ箱が表示されます。",subtitleUser:"削除されたファイルは {{days}} 日間ゴミ箱に残り、その後自動的に削除されます。",loading:"ゴミ箱を読み込み中…",loadError:"ゴミ箱を読み込めませんでした。",empty:"ゴミ箱は空です。",summary:"{{count}} 件 · {{size}}",emptyTrash:"ゴミ箱を空にする",restore:"復元",purgeNow:"今すぐ削除",autoPurgeIn:"{{when}} に自動削除",days:"日",retentionLabel:"自動削除までの期間",selectAll:"すべて選択",selectOne:"{{filename}} を選択",selectionCount:"{{count}} 件選択中",bulkRestore:"選択したものを復元",bulkPurge:"選択したものを削除",col:{filename:"ファイル",folder:"フォルダ",size:"サイズ",deleted:"ゴミ箱に移動",autoPurge:"自動削除",owner:"所有者",actions:"操作"},confirm:{purgeTitle:"完全に削除しますか？",purgeBody:"{{filename}} はディスクから削除され、復元できません。",emptyTitle:"ゴミ箱を空にしますか？",emptyBody:"{{count}} 件のファイルすべてがディスクから削除されます。この操作は取り消せません。",bulkPurgeTitle:"選択したファイルを完全に削除しますか？",bulkPurgeBody:"選択した {{count}} 件のファイルがディスクから削除され、復元できません。",cta:"完全に削除"},toast:{restored:"ファイルを復元しました。",restoreFailed:"ファイルを復元できませんでした。",purged:"ファイルを完全に削除しました。",purgeFailed:"ファイルを削除できませんでした。",emptied:"ゴミ箱から {{count}} 件のファイルを削除しました。",emptyFailed:"ゴミ箱を空にできませんでした。",retentionSaved:"自動削除を {{days}} 日に設定しました。",retentionFailed:"保持期間の設定を保存できませんでした。",bulkRestored:"{{count}} 件のファイルを復元しました。",bulkPurged:"{{count}} 件のファイルを削除しました。"}},libraryPurge:{title:"古いファイルを一括削除",headerButton:"古いファイル削除",headerTooltip:"古いファイルをまとめてゴミ箱に移動",description:"指定した期間より古いファイルはゴミ箱に移動されます。外部フォルダはスキップされます。自動削除までの間、ゴミ箱から復元できます。",ageLabel:"次より古いファイルを移動",days:"日",includeNeverPrinted:"一度も印刷していないファイルも含める",effectsTitle:"「削除」をクリックすると何が起こるか",effect1:"一致するファイルはゴミ箱に移動されます。ディスクからはまだ削除されません。",effect2:"保持期間が過ぎるまで、いつでもゴミ箱から復元できます。",effect3:"保持期間が過ぎると、ゴミ箱クリーナーがディスクから完全に削除します。",effect4:"外部（リンク済み）フォルダー内のファイルはスキップされます — Bambuddyは所有していないバイトを削除しません。",previewLoading:"対象ファイル数を確認中…",previewFailed:"プレビューを取得できませんでした。",previewSummary:"{{count}} 件 · {{size}} がゴミ箱に移動されます",andMore:"…ほか {{count}} 件",warning:"ファイルはソフト削除されます — 保持期間が終了するまでゴミ箱から復元できます。",confirmCta:"{{count}} 件をゴミ箱へ移動",purging:"ゴミ箱へ移動中…",toast:{success:"{{count}} 件のファイルをゴミ箱に移動しました。",failed:"ファイルを削除できませんでした。"}},libraryAutoPurge:{enableLabel:"古いファイルを自動で一括削除",enableDescription:"管理者の一括削除を 1 日 1 回実行します。ファイルはまずゴミ箱に移動され、すぐには削除されません。",ageLabel:"次より古いファイルを自動削除",ageDescription:"最短 7 日、最長 10 年。手動の「古いファイル削除」ボタンと同じ期間ルールを使用します。",days:"日",includeNeverPrinted:"一度も印刷していないファイルも含める",saveFailed:"自動削除の設定を保存できませんでした。"},archivePurge:{headerButton:"古いものを削除",headerTooltip:"古いアーカイブを一括削除",title:"古いアーカイブを削除",description:"古い印刷履歴をクリア。各アーカイブは最新の印刷完了に基づいてエイジングされます — アーカイブを再印刷するとエイジがリセットされるため、現在使用中の作業が削除されることはありません。",ageLabel:"印刷されていないアーカイブを削除（過去",days:"日",effectsTitle:"「削除」をクリックすると何が起こるか",effect1:"一致するアーカイブはリストから非表示になり、ファイル（3MF、サムネイル、タイムラプス、ソース3MF、F3D、写真）はディスクから削除されます。",effect2:"アーカイブのレコードはデータベースに残るため、Quick Stats のフィラメント／時間／コスト／エネルギーの寄与は保持されます — 個別アーカイブ削除の既定動作と同じです。",effect3:"下の「統計からも削除」を有効にすると、Quick Stats の寄与も破棄されます（個別アーカイブ削除のオプションと同等）。この操作は取り消せません。",effect4:"アーカイブを再印刷するとエイジクロックがリセットされるため、まだ使用中のアーカイブは安全です。",purgeStatsLabel:"統計からも削除",purgeStatsHint:"一致するアーカイブを Quick Stats（フィラメント、時間、コスト、エネルギー）からも削除します。チェックしない場合、Quick Stats は寄与を保持し、ファイルのみがディスクから消えます。",previewLoading:"一致するアーカイブの数を確認中…",previewFailed:"削除のプレビューを表示できませんでした。",previewSummary:"{{count}}件のアーカイブ · {{size}}が削除されます",andMore:"…他に{{count}}件",warning:"ファイルはディスクから削除され、元に戻せません。続行する前に、保持したいものをダウンロードまたはお気に入りに追加してください。",confirmCta:"{{count}}件のアーカイブを削除",purging:"削除中…",toast:{success:"{{count}}件のアーカイブを削除しました。",failed:"アーカイブを削除できませんでした。"}},archiveAutoPurge:{enableLabel:"古いアーカイブを自動削除",enableDescription:"1日1回、しきい値内に印刷されていないアーカイブをリストから非表示にし、ファイルをディスクから削除します。再印刷するとタイマーがリセットされます。",ageLabel:"印刷されていないアーカイブを自動削除（過去",ageDescription:"最小7日、最大10年。最新の印刷完了に基づきます — 再印刷するとエイジがリセットされます。3MF、サムネイル、タイムラプス、ソース3MF、F3D、写真を削除します。",days:"日",purgeStatsLabel:"統計からも削除",purgeStatsDescription:"有効にすると、毎日のスイーパーが削除した各アーカイブを Quick Stats（フィラメント、時間、コスト、エネルギー）からも除外します。既定はオフ — Quick Stats は寄与を保持し、ファイルのみがディスクから消えます。",runNow:"アーカイブを今すぐ削除",saveFailed:"自動削除設定を保存できませんでした。"},cameraTokens:{title:"カメラAPIトークン",navTitle:"カメラAPIトークン",description:"Home Assistant、Frigate、キオスク、その他安定したURLが必要なツールにカメラストリームを埋め込むための長期トークン。各トークンはカメラストリーム専用で、いつでも取り消し可能。",loading:"読み込み中…",confirmRevoke:{title:"このトークンを取り消しますか？",body:"「{{name}}」を使用しているデバイスは直ちにアクセスできなくなります。元に戻せません。",cancel:"キャンセル",confirm:"取り消し"},create:{title:"新しいトークンを作成",nameLabel:"トークン名",namePlaceholder:"例：Home Assistant",daysLabel:"有効期限までの日数",submit:"作成",hint:"最大有効期間は365日。トークン値は作成時に一度だけ表示されます — 今すぐコピーしてください。"},created:{title:"トークンを作成しました – 今すぐコピー",warning:"このトークンが表示されるのは今回限りです。このダイアログを閉じると二度と表示できません。",copy:"コピー",dismiss:"保存しました"},list:{myTitle:"マイトークン",allTitle:"全ユーザー（管理者ビュー）",empty:"トークンはまだありません。",name:"名前",owner:"所有者",prefix:"プレフィックス",created:"作成",expires:"有効期限",lastUsed:"最終使用",revoke:"取り消し",expired:"期限切れ"},toast:{created:"トークンを作成しました",createFailed:"トークンの作成に失敗",revoked:"トークンを取り消しました",revokeFailed:"トークンの取り消しに失敗",loadFailed:"トークンの読み込みに失敗",copied:"クリップボードにコピー",copyFailed:"コピーに失敗 – 手動で選択してコピー"}},forecast:{title:"在庫予測",noSpools:"アクティブなスプールが見つかりません。予測データを表示するには、在庫にスプールを追加してください。",noUsageData:"使用データがありません — 在庫のタイムラインを予測できません。",sku:"SKU",material:"素材",stock:"在庫",dailyRate:"レート",daysLeft:"残り日数",emptyBy:"在庫切れ予定日",reorderBy:"発注期限",actions:"操作",trend:"トレンド",estimated:"推定",noData:"データなし",timeframe:"期間",chartTitle:"在庫予測 — 上位5素材",dashedLinesROP:"破線 = 発注点",stockLevel:"在庫量",reorderPoint:"発注点",safetyMargin:"安全余裕",trendLegend:"トレンド（履歴ベース、95%サービスレベル）",estimatedLegend:"推定（重量差分）",noDataLegend:"データなし",ropLabel:"発注点",ssLabel:"安全在庫",safetyStockLegend:"安全在庫",stockArrivalLegend:"入荷",stockoutLegend:"品切れ",alertCount_one:"{{count}}件の警告",alertCount_other:"{{count}}件の警告",order:"注文",globalLeadTime:"グローバルリードタイム",globalLeadTimeHint:"グローバルリードタイムの下限 — 全SKUの発注点計算に使用",save:"保存",cancel:"キャンセル",settingsSaved:"設定を保存しました",failedSaveSettings:"設定の保存に失敗しました",globalLeadTimeSaved:"グローバルリードタイムを保存しました",skuLeadTimeOverride:"SKUリードタイム上書き",skuLeadTimeHint:"0 = グローバルリードタイムを使用。このSKUを上書きするには0より大きい値を設定。",safetyMarginLabel:"安全余裕",effectiveLeadTime:"実効リードタイム",effectiveLeadTimeHint:"max(グローバル {{global}}日, SKU {{sku}}日)",reorderPointHint:"d̄ × LT + safety margin — 在庫がこのレベルに達したら発注",safetyMarginHint:"統計的安全在庫 (z=1.65 × σ × √LT) + ユーザー定義バッファ",safetyMarginHintDays:"統計的安全在庫に加算されるバッファ。{{approx}}",safetyMarginHintDaysApprox:" ≈ 現在のペースで{{g}}g。",safetyMarginHintG:"統計的安全在庫に加算される固定重量バッファ。{{approx}}",safetyMarginHintGApprox:" ≈ 現在のペースで{{days}}日。",individualSpools:"個別スプール",labelWeight:"ラベル",spoolCount_one:"{{count}}個のスプール",spoolCount_other:"{{count}}個のスプール",stockBreakRisk:"在庫切れリスク",stockBreakBefore:"補充前の在庫切れ",stockBreakDetail:"残り{{days}}日、リードタイム{{lt}}日。",reorderNow:"今すぐ発注",reorderTriggerPassed:"発注トリガー日 {{date}} が経過しました。",shoppingList:"購入リスト",shoppingListItems_one:"（{{count}}件）",shoppingListItems_other:"（{{count}}件）",shoppingListEmpty:"購入リストは空です。行のカートアイコンをクリックしてアイテムを追加してください。",addToCart:"購入リストに追加",alertsSnoozed:"このSKUのアラートをミュート",alertsEnabled:"このSKUのアラートを有効にする",addedToCart:"買い物リストに追加しました",failedAddItem:"アイテムの追加に失敗しました",listView:"リスト",logisticsView:"ロジスティクス",qty:"数量",weight:"重量",leadTime:"リードタイム",expectedRestock:"入荷予定日",status:"ステータス",note:"メモ",pending:"保留中",purchased:"発注済み",received:"受領済み",markPurchased:"発注済みとしてマーク",markReceived:"受領済みとしてマーク — スプールを在庫に追加",resetToPending:"保留中にリセット",remove:"削除",clearAll:"すべてクリア",downloadCsv:"CSV",addToCartTitle:"買い物リストに追加",byQuantity:"数量で",byDuration:"期間で",numberOfSpools:"スプール数",lastHowManyDays:"何日間持つべきですか？",noUsageQty:"使用データなし — 数量を1に設定しました。",noteOptional:"メモ（任意）",notePlaceholder:"例：プロジェクトX用、緊急…",addNSpools_one:"{{count}}個のスプールを追加",addNSpools_other:"{{count}}個のスプールを追加",onArrival:"入荷時",stockBreakIn:"{{days}}日後に在庫切れ。",stockRunsOutBefore:"リードタイム{{lt}}日が経過する前に在庫が枯渇します。",atRate:"{{rate}}g/日のペースでは",moreSpools_one:"あと{{count}}個のスプール",moreSpools_other:"あと{{count}}個のスプール",bridgeGap:"が不足を補うために必要です。",noReadAccess:"在庫予測を閲覧する権限がありません。",noWriteAccess:"予測設定を変更する権限がありません。"}},kpe={nav:{printers:"Stampanti",archives:"Archivi",queue:"Coda di stampa",stats:"Statistiche",profiles:"Profili",maintenance:"Manutenzione",projects:"Progetti",inventory:"Filamento",files:"File",makerworld:"MakerWorld",notifications:"Notifiche",settings:"Impostazioni",system:"Sistema",collapseSidebar:"Comprimi barra laterale",expandSidebar:"Espandi barra laterale",update:"Aggiorna",updateAvailable:"Aggiornamento disponibile: v{{version}}",updateAvailableBanner:"Versione {{version}} disponibile!",viewUpdate:"Vedi aggiornamento",viewOnGithub:"Vedi su GitHub",keyboardShortcuts:"Scorciatoie da tastiera (?)",switchToLight:"Passa a tema chiaro",switchToDark:"Passa a tema scuro",switchToSystem:"Passa a tema di sistema",smartSwitches:"Interruttori Smart",logout:"Esci",installApp:"Installa app",installAppSuccess:"Bambuddy è stato installato"},common:{save:"Salva",saving:"Salvataggio...",cancel:"Annulla",delete:"Elimina",edit:"Modifica",add:"Aggiungi",close:"Chiudi",confirm:"Conferma",loading:"Caricamento...",error:"Errore",errorLoading:"Errore di caricamento",retry:"Riprova",success:"Successo",warning:"Avviso",enabled:"Abilitato",disabled:"Disabilitato",yes:"Si",no:"No",on:"On",off:"Spento",all:"Tutti",none:"Nessuno",search:"Cerca",filter:"Filtro",sort:"Ordina",refresh:"Aggiorna",download:"Scarica",upload:"Carica",uploading:"Caricamento...",uploadFailed:"Caricamento fallito",actions:"Azioni",status:"Stato",name:"Nome",description:"Descrizione",date:"Data",time:"Ora",hours:"ore",minutes:"minuti",seconds:"secondi",days:"giorni",enable:"Abilita",disable:"Disabilita",permissions:"Permessi",noPrinters:"Nessuna stampante configurata",noData:"Nessun dato disponibile",linkNotFound:"Link non trovato",required:"Obbligatorio",optional:"Opzionale",dismiss:"Chiudi",apply:"Applica",reset:"Reimposta",export:"Esporta",import:"Importa",clear:"Pulisci",selectAll:"Seleziona tutto",deselectAll:"Deseleziona tutto",noChange:"— Nessun cambio —",unchanged:"Invariato",unassigned:"Non assegnato",unknown:"Sconosciuto",unknownError:"Errore sconosciuto",today:"Oggi",tomorrow:"Domani",asap:"ASAP",overdue:"Scaduto",now:"Ora",collapse:"Comprimi",expand:"Espandi",viewArchive:"Vedi archivio",viewInFileManager:"Vedi nel Gestore file",addedBy:"Aggiunto da {{username}}",prints:"stampe",more:"+{{count}} altre",ascending:"Crescente",descending:"Decrescente",back:"Indietro",copy:"Copia",copied:"Copiato!",printer:"Stampante",remove:"Rimuovi",type:"Tipo",print:"Stampa",rename:"Rinomina",move:"Sposta",create:"Crea",duplicate:"Duplica",left:"Sinistra",right:"Destra"},printers:{addPreflight:{checking:"Verifica della connessione...",warning:"Alcuni controlli di connessione non sono riusciti. Questa stampante potrebbe risultare offline. Controlla le verifiche qui sotto, risolvi ciò che puoi oppure salva comunque.",back:"Indietro",saveAnyway:"Salva comunque"},title:"Stampanti",addPrinter:"Aggiungi Stampante",editPrinter:"Modifica Stampante",deletePrinter:"Elimina Stampante",printerName:"Nome Stampante",serialNumber:"Numero Seriale",ipAddress:"Indirizzo IP",accessCode:"Codice di Accesso",model:"Modello",nozzleCount:"Numero Ugelli",autoArchive:"Auto Archiviazione",status:{available:"Disponibile",idle:"Inattiva",printing:"In stampa",paused:"In pausa",offline:"Offline",problem:"Problema",error:"Errore",finished:"Finita",unknown:"Sconosciuto"},temperatures:{nozzle:"Ugello",bed:"Piatto",chamber:"Camera"},progress:"{{percent}}% completato",timeRemaining:"{{time}} rimanente",deleteConfirm:'Sei sicuro di eliminare "{{name}}"?',maintenanceOk:"Manutenzione OK",maintenanceWarning:"{{count}} avviso",maintenanceWarning_plural:"{{count}} avvisi",maintenanceDue:"{{count}} in scadenza",maintenanceDue_plural:"{{count}} in scadenza",sort:{name:"Nome",status:"Stato",model:"Modello",location:"Posizione",ascending:"Ordina crescente",descending:"Ordina decrescente"},cardSize:{small:"Schede piccole",medium:"Schede medie",large:"Schede grandi",extraLarge:"Schede extra grandi"},hideOffline:"Nascondi offline",nextAvailable:"Prossima disponibile",powerOn:"Accendi",offlinePrintersWithPlugs:"Stampanti offline con smart plug",noPrintersConfigured:"Nessuna stampante configurata",search:"Cerca stampanti...",noSearchResults:"Nessuna stampante corrisponde alla tua ricerca o ai tuoi filtri",filter:{allStatuses:"Tutti gli stati",allLocations:"Tutti i luoghi"},toolbar:{filters:"Filtri",view:"Vista",actions:"Azioni"},readyToPrint:"Pronta a stampare",external:"Esterna",extL:"Ext-L",extR:"Ext-R",deleteArchives:"Elimina archivi stampa",noLabel:"Nessuna etichetta",printPreview:"Anteprima stampa",width:"Larghezza",height:"Altezza",noObjectsFound:"Nessun oggetto trovato",objectsLoadedOnPrintStart:"Gli oggetti sono caricati quando inizia una stampa",willBeSkipped:"Verra saltato",name:"Nome",serialCannotBeChanged:"Il numero seriale non può essere cambiato",locationHelp:"Usato per raggruppare stampanti e filtrare i lavori in coda",wifiSignal:{veryWeak:"Molto debole",weak:"Debole",fair:"Discreto",good:"Buono",excellent:"Eccellente"},maintenanceUpToDate:"Tutta la manutenzione aggiornata - Clicca per vedere",chamberLightOn:"Accendi luce camera",chamberLightOff:"Spegni luce camera",files:"File",browseFiles:"Sfoglia file stampante",autoOffAfterPrint:"Spegnimento automatico dopo stampa",autoOffExecuted:"Spegnimento automatico eseguito - accendi la stampante per reimpostare",hmsErrors:"Errori HMS",viewHmsErrors:"Vedi {{count}} errore(i) HMS",resume:"Riprendi",pause:"Pausa",stop:"Ferma",camera:"Telecamera",skipObject:"Salta Oggetto",reconnect:"Riconnetti",forceRefresh:"Forza aggiornamento",forceRefreshSuccess:"Aggiornamento richiesto",mqttDebug:"Debug MQTT",printerInformation:"Informazioni stampante",copyToClipboard:"Copia",copied:"Copiato!",state:"Stato",wifiSignalLabel:"Segnale WiFi",developerMode:"Modalità sviluppatore",enabled:"Attivato",disabled:"Disattivato",addedOn:"Aggiunta il",sdCard:"Scheda SD",inserted:"Inserita",notInserted:"Non inserita",totalPrintHours:"Ore di stampa",activeNozzle:"Attivo: ugello {{nozzle}}",nozzleRack:"Rack Ugelli",nozzleDocked:"Agganciato",nozzleMounted:"Montato",nozzleActive:"Attivo",nozzleIdle:"Inattivo",nozzleDiameter:"Diametro",nozzleType:"Tipo",nozzleStatus:"Stato",nozzleFilament:"Filamento",nozzleWear:"Usura",nozzleMaxTemp:"Temp Max",nozzleSerial:"Seriale",nozzleHardenedSteel:"Acciaio Temprato",nozzleStainlessSteel:"Acciaio Inox",nozzleTungstenCarbide:"Carburo di Tungsteno",nozzleFlow:"Flusso",nozzleHighFlow:"Alto Flusso",nozzleStandardFlow:"Standard",firmwareUpdate:"Aggiornamento Firmware",firmwareInstructions:"Sul touchscreen della stampante, vai a",firmwareNav:"Vai a",settings:"Impostazioni",firmware:"Firmware",discoverPrinters:"Trova Stampanti",searching:"Ricerca...",manualEntry:"Inserimento manuale",addFromCloud:"Aggiungi da Cloud",toast:{printerDeleted:"Stampante eliminata",missingSpoolAssignment:"Stampa avviata su {{printer}}. Mancano assegnazioni bobina per: {{slots}}",printerAdded:"Stampante aggiunta",printerUpdated:"Stampante aggiornata",failedToDelete:"Impossibile eliminare stampante",failedToAdd:"Impossibile aggiungere stampante",connectionFailedNotAdded:"Impossibile connettersi alla stampante. Verifica IP, numero di serie e codice di accesso e conferma che la modalità solo LAN sia attiva. La stampante non è stata aggiunta.",failedToUpdate:"Impossibile aggiornare stampante",commandSent:"Comando inviato",failedToSendCommand:"Impossibile inviare comando",turnedOn:"{{name}} accesa",failedToPowerOn:"Impossibile accendere {{name}}",scriptTriggered:"Script avviato",printStopped:"Stampa fermata",printPaused:"Stampa in pausa",printResumed:"Stampa ripresa",referenceDeleted:"Riferimento eliminato",detectionAreaSaved:"Area rilevamento salvata",failedToRunScript:"Impossibile eseguire script",failedToStopPrint:"Impossibile fermare stampa",failedToPausePrint:"Impossibile mettere in pausa stampa",failedToResumePrint:"Impossibile riprendere stampa",failedToControlChamberLight:"Impossibile controllare luce camera",failedToSetSpeed:"Impossibile impostare la velocità di stampa",failedToUpdateSetting:"Impossibile aggiornare impostazione",failedToSkipObjects:"Impossibile saltare oggetti",failedToRereadRfid:"Impossibile rileggere RFID",failedToCheckPlate:"Impossibile controllare piatto",failedToUpdateLabel:"Impossibile aggiornare etichetta",failedToDeleteReference:"Impossibile eliminare riferimento",failedToSaveDetectionArea:"Impossibile salvare area rilevamento",plateCheckEnabled:"Controllo piatto abilitato",plateCheckDisabled:"Controllo piatto disabilitato",calibrationSaved:"Calibrazione salvata!",calibrationFailed:"Calibrazione non riuscita",rfidRereadInitiated:"Rilettura RFID avviata",loadInitiated:"Caricamento filamento…",unloadInitiated:"Scaricamento filamento…",failedToLoad:"Caricamento filamento fallito",failedToUnload:"Scaricamento filamento fallito"},connection:{connected:"Connesso",offline:"Offline"},plateStatus:{markCleared:"Segna il piatto come liberato",cleared:"Piatto libero",notCleared:"Piatto non libero",inUse:"Piatto in uso"},queue:{inQueue:"{{count}} stampa in coda",inQueue_plural:"{{count}} stampe in coda"},controls:"Controlli",rfid:{reread:"Rileggi RFID"},ams:{load:"Carica",unload:"Scarica"},bedJog:{title:"Muovi il piano di stampa",bed:"Piano",step:"Passo (mm)",up:"Sposta piano su",down:"Sposta piano giù",disabledWhilePrinting:"Disabilitato durante la stampa",notHomedTitle:"Stampante non azzerata",notHomedMessage:"La stampante non è stata azzerata dall'ultima stampa. Esegui prima l'azzeramento automatico per un posizionamento sicuro (parcheggia la testa di stampa, poi azzera X, Y e Z), oppure muovi comunque — i finecorsa software verranno ignorati.",homeZ:"Azzeramento automatico",moveAnyway:"Muovi comunque",homingStarted:"Azzeramento automatico in corso…"},permission:{noAdd:"Non hai il permesso di aggiungere stampanti",noEdit:"Non hai il permesso di modificare stampanti",noDelete:"Non hai il permesso di eliminare stampanti",noControl:"Non hai il permesso di controllare stampanti",noFiles:"Non hai il permesso di accedere ai file stampante",noAmsRfid:"Non hai il permesso di rileggere AMS RFID",noSmartPlugControl:"Non hai il permesso di controllare smart plug",noCamera:"Non hai il permesso di visualizzare le telecamere"},modal:{addTitle:"Aggiungi Stampante",editTitle:"Modifica Stampante",myPrinter:"La mia Stampante",selectModel:"Seleziona modello...",locationGroup:"Posizione / Gruppo (opzionale)",locationPlaceholder:"es. Officina, Ufficio, Cantina",autoArchiveLabel:"Archivia automaticamente stampe completate",fromPrinterSettings:"Dalle impostazioni della stampante",modelOptional:"Modello (opzionale)",saveChanges:"Salva modifiche"},skipObjects:{tooltip:"Salta oggetti",onlyWhilePrinting:"Salta oggetti (solo durante la stampa)",requiresMultiple:"Salta oggetti (richiede 2+ oggetti)",title:"Salta Oggetti",matchIdsInfo:"Abbina gli ID con il display della stampante",printerShowsIds:"Lo schermo mostra gli ID oggetto sul piatto",skipSelected:"Salta selezionati",skipping:"Saltando...",noObjectsSelected:"Nessun oggetto selezionato",selectObjectsToSkip:"Seleziona gli oggetti da saltare nella stampa corrente",skipped:"saltato",objectsSkipped:"Oggetti saltati",activeCount:"{{count}} attivi",waitForLayer:"Attendi il layer 2+ per saltare oggetti (attualmente layer {{layer}})",skip:"Salta",confirmTitle:"Saltare oggetto?",confirmMessage:'Sei sicuro di voler saltare "{{name}}"? Questa azione non può essere annullata.'},confirm:{deleteTitle:"Elimina Stampante",deleteMessage:'Sei sicuro di eliminare "{{name}}"? Questo rimuoverà tutte le impostazioni di connessione.',deleteArchivesNote:"Tutta la cronologia di stampa sarà eliminata definitivamente.",keepArchivesNote:"La cronologia sarà mantenuta ma non più associata a questa stampante.",stopTitle:"Ferma Stampa",stopMessage:'Sei sicuro di fermare la stampa corrente su "{{name}}"? Questo annullerà il lavoro di stampa.',stopButton:"Ferma Stampa",pauseTitle:"Pausa Stampa",pauseMessage:'Sei sicuro di mettere in pausa la stampa corrente su "{{name}}"?',pauseButton:"Pausa Stampa",resumeTitle:"Riprendi Stampa",resumeMessage:'Sei sicuro di riprendere la stampa su "{{name}}"?',resumeButton:"Riprendi Stampa",powerOnTitle:"Accendi Stampante",powerOnMessage:'Sei sicuro di accendere "{{name}}"?',powerOnButton:"Accendi",powerOffTitle:"Spegni Stampante",powerOffMessage:'Sei sicuro di spegnere "{{name}}"?',powerOffWarning:'AVVISO: "{{name}}" sta stampando! Sei sicuro di spegnere? Questo interromperà la stampa e potrebbe danneggiare la stampante.',powerOffButton:"Spegni",haToggleTitle:'Commuta "{{name}}"',haToggleMessage:"Commutare l'entità Home Assistant {{entity}}? Questo potrebbe spegnere l'alimentazione se attualmente è accesa.",haToggleWarning:`AVVISO: "{{name}}" sta stampando! La commutazione di {{entity}} potrebbe togliere l'alimentazione e interrompere la stampa. Continuare?`,haToggleButton:"Commuta"},bulk:{select:"Seleziona",selectAll:"Seleziona tutto",selectByLocation:"Seleziona per posizione",selected:"{{count}} selezionato/i",actions:{stop:"Ferma",pause:"Pausa",resume:"Riprendi",clearPlate:"Svuota piano",clearHMS:"Cancella notifiche"},confirm:{stopTitle:"Ferma {{count}} stampe",stopMessage:"Questo annullerà le stampe attive su {{count}} stampante/i. Questa azione non può essere annullata.",stopButton:"Ferma tutte",pauseTitle:"Pausa {{count}} stampe",pauseMessage:"Questo metterà in pausa le stampe attive su {{count}} stampante/i.",pauseButton:"Pausa tutte",clearPlateTitle:"Svuota {{count}} piani di stampa",clearPlateMessage:"Questo svuoterà il piano di stampa su {{count}} stampante/i e potrebbe avviare i lavori in coda.",clearPlateButton:"Svuota tutti"},success:"{{action}} completato su {{count}} stampante/i",partial:"{{succeeded}} riuscito/i, {{failed}} fallito/i",noneApplicable:"Nessuna stampante selezionata è nello stato corretto per questa azione",selectByState:"Seleziona per stato"},discovery:{title:"Trova Stampanti",searching:"Ricerca...",scanning:"Scansione...",scanProgress:"Scansione... {{scanned}}/{{total}}",foundPrinters:"Trovate {{count}} stampante(i)",noPrintersFound:"Nessuna stampante trovata",noPrintersFoundSubnet:"Nessuna stampante trovata nella sottorete specificata.",noPrintersFoundNetwork:"Nessuna stampante trovata sulla rete.",allConfigured:"Tutte le stampanti trovate sono già configurate.",alreadyAdded:"Già aggiunta",select:"Seleziona",manualEntry:"Inserimento manuale",addFromCloud:"Aggiungi da Cloud",subnetToScan:"Sottorete da scansionare",dockerNote:"Docker rilevato. Inserisci la sottorete della stampante in notazione CIDR. Richiede network_mode: host in docker-compose.yml.",scanSubnet:"Scansiona sottorete per stampanti",discoverNetwork:"Trova stampanti in rete",scanningSubnet:"Scansione sottorete per stampanti Bambu...",scanningNetwork:"Scansione rete...",serialRequired:"Seriale richiesto",unknown:"Sconosciuto",failedToStart:"Avvio ricerca non riuscito",customSubnetOption:"Sottorete personalizzata...",customSubnetLabel:"Sottorete personalizzata (CIDR)",customSubnetNote:"Usa una sottorete personalizzata se la tua stampante è su una rete diversa da questo server. Le porte FTP (990) e MQTT (8883) devono essere raggiungibili attraverso il confine di routing."},drying:{start:"Avvia essiccazione",stop:"Ferma essiccazione",temperature:"Temperatura",duration:"Durata",hours:"ore",timeRemaining:"{{time}} rimanente",active:"Essiccazione",notSupported:"Essiccazione non supportata",powerRequired:"Collegare l'alimentatore AMS per abilitare l'asciugatura",startingDrying:"Avvio essiccazione...",stoppingDrying:"Arresto essiccazione...",rotateTray:"Ruota la bobina durante l'essiccazione"},filaments:"Filamenti",openCameraOverlay:"Apri overlay camera",openCameraWindow:"Apri camera in nuova finestra",firmwareUpdateAvailable:"Aggiornamento firmware disponibile: {{current}} → {{latest}}",firmwareUpToDate:"Firmware {{version}} — Aggiornato",firmwareUpdateButton:"Aggiorna",plateDetection:{noPermission:"Non hai il permesso di aggiornare le stampanti",enabledClick:"Controllo piatto abilitato - Clicca per disabilitare",disabledClick:"Controllo piatto disabilitato - Clicca per abilitare",manageCalibration:"Gestisci calibrazione rilevamento piatto",calibrationRequired:"Calibrazione richiesta",calibrationInstructions:"Assicurati che il piatto sia <strong>completamente vuoto</strong>, poi clicca Calibra.",calibrationDescription:"La calibrazione salva un'immagine di riferimento del piatto vuoto. I controlli futuri confronteranno con questo riferimento per rilevare oggetti.",calibrationTip:"<strong>Suggerimento:</strong> Puoi salvare fino a 5 calibrazioni per piatti diversi. Il sistema usa automaticamente la migliore corrispondenza durante il controllo.",plateEmpty:"Il piatto sembra vuoto",objectsDetected:"Oggetti rilevati sul piatto",confidence:"Confidenza",difference:"Differenza",analysisPreview:"Anteprima analisi:",analysisLegend:"Riquadro verde = area rilevamento, overlay rosso = differenze dalla calibrazione",savedReferences:"Riferimenti salvati ({{count}}/{{max}})",deleteReference:"Elimina riferimento",labelPlaceholder:"Etichetta...",clickToEdit:"{{label}} - Clicca per modificare",clickToAddLabel:"Clicca per aggiungere etichetta"},speed:{title:"Velocità di stampa",silent:"Silenzioso (50%)",standard:"Standard (100%)",sport:"Sport (124%)",ludicrous:"Ludicrous (166%)"},airduct:{title:"Modalità condotto d'aria",cooling:"Raffreddamento",heating:"Riscaldamento"},noSdCard:"Nessuna SD",door:{open:"Aperta",closed:"Chiusa"},fans:{partCooling:"Ventola raffreddamento parte",auxiliary:"Ventola ausiliaria",chamber:"Ventola camera"},clickToViewHmsErrors:"Clicca per vedere errori HMS",estimatedCompletion:"Tempo completamento stimato",plateNumber:"Piastra {{number}}",slotOptions:"Opzioni slot",amsPopup:{friendlyName:"Nome AMS",friendlyNamePlaceholder:"es. Nome AMS amichevole",serialNumber:"Numero di serie",firmwareVersion:"Firmware",save:"Salva",clear:"Cancella",noEditPermission:"Non hai il permesso di rinominare le unità AMS"},firmwareModal:{title:"Aggiornamento Firmware",titleUpToDate:"Info Firmware",currentVersion:"Corrente:",latestVersion:"Ultima:",releaseNotes:"Note di rilascio",checkingPrereqs:"Controllo prerequisiti...",sdCardReady:"SD pronta. Clicca sotto per caricare firmware.",uploadedSuccess:"Firmware caricato su SD!",applyInstructions:"Per applicare l'aggiornamento sulla stampante:",step1:"Sul touchscreen della stampante, vai a <strong>Impostazioni</strong>",step2:"Vai a <strong>Firmware</strong>",step3:"Seleziona <strong>Aggiorna da SD</strong>",step4:"L'aggiornamento richiede 10-20 minuti",done:"Fatto",starting:"Avvio...",uploadFirmware:"Carica Firmware",uploadFailed:"Avvio caricamento fallito: {{error}}",uploadedToast:"Firmware caricato! Avvia aggiornamento dal display.",availableVersions:"Versioni disponibili",usable:"Utilizzabile",unavailable:"Non disponibile",installed:"Installato",newerBadge:"più recente",olderBadge:"più vecchio",currentBadge:"attuale"},accessCodePlaceholder:"Lascia vuoto per mantenere quello attuale",roi:{title:"Area di rilevamento (ROI)",xStart:"X Inizio",yStart:"Y Inizio",width:"Larghezza",height:"Altezza",instruction:"Regola l'area di rilevamento per focalizzare il piatto. Il riquadro verde mostra l'area corrente."},developerModeWarning:"La modalità sviluppatore LAN non è attivata su: {{names}}. Alcune funzionalità potrebbero non funzionare.",howToEnable:"Come attivare",incompatibleFile:"Questo file è stato preparato per {{slicedFor}}, ma questa stampante è una {{printerModel}}",dropNotPrintable:"Solo i file .gcode e .gcode.3mf possono essere stampati",dropToPrint:"Rilascia per stampare",cannotPrint:"Stampante occupata"},archives:{title:"Archivi di stampa",searchPlaceholder:"Cerca archivi...",filterByPrinter:"Filtra per stampante",filterByStatus:"Filtra per stato",sortBy:"Ordina per",sortNewest:"Più recenti",sortOldest:"Meno recenti",sortName:"Nome",sortDuration:"Durata",sortLargest:"Più grandi",sortSmallest:"Più piccoli",sortSize:"Dimensione",noArchives:"Nessun archivio trovato",noArchivesSearch:"Nessun archivio corrisponde alla ricerca",originalPrintNotVisible:"Stampa originale non visibile - prova a rimuovere i filtri",noArchivesYet:"Nessun archivio ancora",prints:"stampe",pagination:{showing:"Mostrando",to:"a",of:"di",show:"Mostra",page:"Pagina",all:"Tutti"},loadingArchives:"Caricamento archivi...",releaseToUpload:"Rilascia per caricare",showAll:"Mostra tutti",showFavoritesOnly:"Solo preferiti",gridView:"Vista griglia",listView:"Vista elenco",calendarView:"Vista calendario",logView:"Registro stampe",manageTags:"Gestisci tag",showFailedPrints:"Mostra stampe fallite",hideFailedPrints:"Nascondi stampe fallite",hideDuplicates:"Nascondi duplicati",viewOriginalPrint:"Fai clic per visualizzare la stampa originale (#{{id}})",printTime:"Tempo di stampa",filamentUsed:"Filamento usato",cost:"Costo",reprint:"Ristampa",preview:"Anteprima",deleteArchive:"Elimina archivio",deleteConfirm:"Sei sicuro di eliminare questo archivio?",favorite:"Preferito",unfavorite:"Rimuovi dai preferiti",viewDetails:"Vedi dettagli",status:{completed:"Completato",failed:"Fallito",stopped:"Fermato"},toast:{source3mfAttached:"Sorgente 3MF allegata: {{filename}}",failedUploadSource3mf:"Caricamento sorgente 3MF non riuscito",source3mfRemoved:"Sorgente 3MF rimossa",failedRemoveSource3mf:"Rimozione sorgente 3MF non riuscita",f3dAttached:"F3D allegato: {{filename}}",failedUploadF3d:"Caricamento F3D non riuscito",f3dRemoved:"F3D rimosso",failedRemoveF3d:"Rimozione F3D non riuscita",timelapseAttached:"Timelapse allegato: {{filename}}",timelapseAlreadyAttached:"Timelapse già allegato",noMatchingTimelapse:"Nessun timelapse corrispondente",failedScanTimelapse:"Scansione timelapse non riuscita",failedAttachTimelapse:"Allegato timelapse non riuscito",timelapseRemoved:"Timelapse rimosso",failedRemoveTimelapse:"Impossibile rimuovere il timelapse",timelapseUploaded:"Timelapse caricato: {{filename}}",failedUploadTimelapse:"Impossibile caricare il timelapse",archiveDeleted:"Archivio eliminato",failedDeleteArchive:"Eliminazione archivio non riuscita",addedToFavorites:"Aggiunto ai preferiti",removedFromFavorites:"Rimosso dai preferiti",projectUpdated:"Progetto aggiornato",failedUpdateProject:"Aggiornamento progetto non riuscito",linkCopied:"Link copiato negli appunti",failedCopyLink:"Copia link non riuscita",photoDeleted:"Foto eliminata",failedDeletePhoto:"Eliminazione foto non riuscita",failedDeleteArchives:"Eliminazione archivi non riuscita",failedUpdateFavorites:"Aggiornamento preferiti non riuscito",exportDownloaded:"Export scaricato",exportFailed:"Export non riuscito"},menu:{print:"Stampa",schedule:"Programma",openInBambuStudio:"Apri nello slicer",slice:"Slice",externalLink:"Link esterno",viewOnMakerWorld:"Vedi su MakerWorld",preview3d:"Anteprima 3D",viewTimelapse:"Vedi Timelapse",scanForTimelapse:"Cerca Timelapse",uploadTimelapse:"Carica timelapse",removeTimelapse:"Rimuovi timelapse",downloadSource3mf:"Scarica Sorgente 3MF",uploadSource3mf:"Carica Sorgente 3MF",replaceSource3mf:"Sostituisci Sorgente 3MF",removeSource3mf:"Rimuovi Sorgente 3MF",uploadF3d:"Carica F3D",replaceF3d:"Sostituisci F3D",downloadF3d:"Scarica F3D",removeF3d:"Rimuovi F3D",download:"Scarica",copyDownloadLink:"Copia link download",qrCode:"Codice QR",viewPhotos:"Vedi foto",viewPhotosCount:"Vedi foto ({{count}})",projectPage:"Pagina progetto",addToFavorites:"Aggiungi ai preferiti",removeFromFavorites:"Rimuovi dai preferiti",edit:"Modifica",printLog:"Registro stampe",goToProject:"Vai al progetto: {{name}}",addToProject:"Aggiungi al progetto",removeFromProject:"Rimuovi dal progetto",loading:"Caricamento...",noProjectsAvailable:"Nessun progetto disponibile",searchProjects:"Cerca progetti…",select:"Seleziona",deselect:"Deseleziona",delete:"Elimina"},permission:{noReprint:"Non hai il permesso di ristampare questo archivio",noAddToQueue:"Non hai il permesso di aggiungere alla coda",noUpdateArchives:"Non hai il permesso di aggiornare archivi",noUploadFiles:"Non hai il permesso di caricare file",noDownload:"Non hai il permesso di scaricare archivi",noCopyLink:"Non hai il permesso di copiare link download",noDelete:"Non hai il permesso di eliminare questo archivio",noCreate:"Non hai il permesso di creare archivi"},platePicker:{title:"Seleziona la piastra da visualizzare",hint:"Questo archivio contiene più piastre. Scegline una da aprire nel visualizzatore GCode.",plateLabel:"Piastra {{index}}",objectCount:"{{count}} oggetto",objectCount_plural:"{{count}} oggetti",noGcode:"Questo archivio non contiene G-code generato da visualizzare. Aprilo prima in Bambu Studio per sezionarlo."},card:{previousPlate:"Piatto precedente",nextPlate:"Piatto successivo",plateNumber:"Piatto {{index}}",moreOptions:"Clic destro per altre opzioni",addToFavorites:"Aggiungi ai preferiti",removeFromFavorites:"Rimuovi dai preferiti",cancelled:"annullato",failed:"fallito",duplicate:"duplicato",duplicateTitle:"Questo modello è stato stampato prima",openSource3mf:"Apri sorgente 3MF in Bambu Studio (clic destro per altre opzioni)",downloadF3d:"Scarica file design Fusion 360",viewTimelapse:"Vedi timelapse",viewPhoto:"Vedi 1 foto",viewPhotos:"Vedi {{count}} foto",openFolder:"Apri cartella: {{name}}",slicedFile:"File slice - pronto a stampare",sourceFile:"Solo file sorgente - nessuna mappatura AMS disponibile",gcode:"GCODE",source:"SOURCE",project:"Progetto: {{name}}",runsBadge:"{{count}} stampe",runsBadgeTitle:"{{count}} stampe in totale — {{successful}} riuscite, {{failed}} fallite. Fai clic per vedere il registro completo.",estimated:"Stimato: {{time}}",actual:"Reale: {{time}}",accuracy:"Accuratezza: {{percent}}%",filament:"{{weight}} g",layer:"{{count}} strato",layers:"{{count}} strati",object:"{{count}} oggetto",objects:"{{count}} oggetti",slicedFor:"Sliced per {{model}}",uploadedBy:"Caricato da",noPermissionReprint:"Non hai il permesso di ristampare",noFileForReprint:"Nessun file 3MF disponibile — il file non è stato scaricato dalla stampante durante la registrazione",noPermissionEdit:"Non hai il permesso di modificare archivi",noPermissionDelete:"Non hai il permesso di eliminare archivi",reprint:"Ristampa",schedulePrint:"Programma Stampa",schedule:"Programma",openInBambuStudio:"Apri nello slicer",openInBambuStudioToSlice:"Apri nello slicer per slicing",slice:"Slice",externalLink:"Link esterno",makerWorld:"MakerWorld – {{designer}}",viewProject:"Vedi progetto",noExternalLink:"Nessun link esterno",preview3d:"Anteprima 3D",download:"Scarica",edit:"Modifica",delete:"Elimina"},runLog:{title:"Registro stampe",modalTitle:"Registro stampe — {{name}}",modalTitleFallback:"questo archivio",empty:"Nessun evento di stampa ancora registrato per questo archivio.",col:{date:"Data",status:"Stato",duration:"Durata",filament:"Filamento",cost:"Costo"},status:{completed:"Completata",failed:"Fallita",cancelled:"Annullata",stopped:"Interrotta",skipped:"Saltata",printing:"In stampa"}},modal:{deleteArchive:"Elimina Archivio",deleteConfirm:'Sei sicuro di eliminare "{{name}}"? Questa azione non può essere annullata.',deleteButton:"Elimina",deletePurgeStats:"Rimuovi anche questa stampa dalle Quick Stats (filamento, tempo, costo, energia)",removeSource3mf:"Rimuovi Sorgente 3MF",removeSource3mfConfirm:'Sei sicuro di rimuovere il file sorgente 3MF da "{{name}}"? Questo eliminerà il progetto slicer originale.',removeButton:"Rimuovi",removeF3d:"Rimuovi F3D",removeF3dConfirm:'Sei sicuro di rimuovere il file Fusion 360 da "{{name}}"?',removeTimelapse:"Rimuovi timelapse",removeTimelapseConfirm:'Sei sicuro di voler rimuovere il video timelapse da "{{name}}"?',timelapse:"{{name}} – Timelapse",selectTimelapse:"Seleziona Timelapse",selectTimelapseDesc:"Nessun abbinamento automatico trovato. Seleziona il timelapse per questa stampa:",deleteArchives:"Elimina Archivi",deleteArchivesConfirm:"Sei sicuro di eliminare {{count}} archivio(i)? Questa azione non può essere annullata.",deleteCount:"Elimina {{count}}"},page:{title:"Archivi",printsCount:"{{filtered}} di {{total}} stampe",dropFilesHere:"Rilascia file .3mf qui",releaseToUpload:"Rilascia per caricare",only3mfSupported:"Solo file .3mf supportati",close:"Chiudi",selected:"{{count}} selezionati",selectAll:"Seleziona tutto",tags:"Tag",project:"Progetto",favorite:"Preferito",delete:"Elimina",toggledFavorites:"Preferiti aggiornati per {{count}} archivio(i)",failedUpdateFavorites:"Aggiornamento preferiti non riuscito",archivesDeleted:"{{count}} archivio(i) eliminati",failedDeleteArchives:"Eliminazione archivi non riuscita",photoDeleted:"Foto eliminata",failedDeletePhoto:"Eliminazione foto non riuscita"},list:{name:"Nome",printer:"Stampante",date:"Data",size:"Dimensione",actions:"Azioni",hasTimelapse:"Ha timelapse"},log:{date:"Data",printName:"Nome stampa",printer:"Stampante",user:"Utente",status:"Stato",duration:"Durata",filament:"Filamento",allPrinters:"Tutte le stampanti",allUsers:"Tutti gli utenti",allStatuses:"Tutti gli stati",cancelled:"Annullato",skipped:"Saltato",dateFrom:"Dal",dateTo:"Al",noEntries:"Nessuna voce di registro trovata",showing:"{{count}} di {{total}} voci",rowsPerPage:"Righe",page:"Pagina",prev:"Prec.",next:"Succ.",clearLog:"Cancella registro",clearLogTitle:"Cancella registro stampe",clearLogConfirm:"Tutte le voci del registro di stampa verranno eliminate permanentemente. Gli archivi e gli elementi della coda non sono interessati. Questa azione non può essere annullata. Sei sicuro?",clearLogButton:"Cancella tutto",cleared:"{{count}} voci di registro cancellate",clearFailed:"Impossibile cancellare il registro stampe"}},queue:{filamentShort:{rowBadge:"Filamento insufficiente per la bobina assegnata",rowTooltip:"Lo scheduler ha segnalato questo elemento. Premi Play per vedere il deficit per slot e decidere se stampare comunque.",confirmTitle:"Filamento insufficiente",confirmIntro:"La bobina assegnata non puo coprire almeno uno slot. Stampare comunque?",lineItem:"Slot {{slot}}: servono {{required}} g, rimangono {{remaining}} g",unknown:"sconosciuto",printAnyway:"Stampa comunque"},title:"Coda di stampa",subtitle:"Programma e gestisci i tuoi lavori di stampa",addToQueue:"Aggiungi alla coda",print:"Stampa",reprint:"Ristampa",schedulePrint:"Programma Stampa",editQueueItem:"Modifica elemento coda",printToPrinters:"Stampa su {{count}} Stampanti",queueToPrinters:"Metti in coda su {{count}} Stampanti",queueSelectedPlates:"Metti in coda {{count}} piastre",selectAllPlates:"Seleziona tutte le {{count}} piastre",deselectAll:"Deseleziona tutto",printQueued:"Stampa in coda",itemsQueued:"{{count}} elementi in coda",sending:"Invio...",sendingProgress:"Invio {{current}}/{{total}}...",adding:"Aggiunta...",addingProgress:"Aggiunta {{current}}/{{total}}...",savingProgress:"Salvataggio {{current}}/{{total}}...",clearQueue:"Svuota coda",clearHistory:"Svuota cronologia",emptyQueue:"La coda è vuota",position:"Posizione",scheduledTime:"Ora programmata",moveUp:"Sposta su",moveDown:"Sposta giù",startNow:"Avvia ora",printingInProgress:"Stampa in corso...",viewArchive:"Vedi archivio",viewInFileManager:"Vedi nel Gestore file",itemCount:"{{count}} elemento",itemCount_plural:"{{count}} elementi",dragToReorder:"Trascina per riordinare (solo ASAP)",reorderHint:"La posizione influisce solo sugli elementi ASAP. Quelli programmati partono all'orario.",sjf:{label:"SJF",tooltip:"Lavoro più breve prima — lo scheduler dà priorità alle stampe più brevi"},addedBy:"Aggiunto da {{name}}",nextInQueue:"Prossimo in coda",clearPlateSuccess:"Piatto liberato — pronto per la prossima stampa",plateNumber:"Piatto {{index}}",quantity:"Quantità",quantityHint:"Crea {{count}} elementi in coda",activeBatches:"Lotti attivi",batchProgress:"{{completed}} di {{total}} completati",cancelBatch:"Annulla rimanenti",batchCancelled:"Elementi rimanenti del lotto annullati",cancelBatchConfirmTitle:"Annulla lotto",cancelBatchConfirmMessage:"Annullare tutti gli elementi in sospeso rimanenti in questo lotto?",batch:"Lotto",sections:{currentlyPrinting:"In stampa",queued:"In coda",history:"Cronologia"},status:{pending:"In attesa",waiting:"In attesa",printing:"In stampa",paused:"In pausa",completed:"Completato",failed:"Fallito",skipped:"Saltato",cancelled:"Annullato"},summary:{printing:"In stampa",queued:"In coda",totalTime:"Tempo totale coda",totalWeight:"Peso totale della coda",history:"Cronologia"},filter:{allPrinters:"Tutte le stampanti",unassigned:"Non assegnato",allStatus:"Tutti gli stati",allLocations:"Tutte le posizioni",any:"Qualsiasi"},sort:{byPosition:"Ordina per posizione",byName:"Ordina per nome",byPrinter:"Ordina per stampante",bySchedule:"Ordina per programma",byDate:"Ordina per data",ascendingOldest:"Crescente (più vecchi)",descendingNewest:"Decrescente (più recenti)"},badges:{staged:"In staging",requiresPrevious:"Richiede successo precedente",autoPowerOff:"Spegnimento automatico",gcodeInjection:"G-code"},empty:{title:"Nessuna stampa programmata",description:`Programma una stampa dalla pagina Archivi usando l'opzione "Programma" nel menu contestuale, o trascina i file per iniziare.`},time:{asap:"ASAP",overdue:"Scaduto",now:"Ora",lessThanMinute:"Tra meno di un minuto",inMinutes:"Tra {{count}} min",inHours:"Tra {{count}} ore"},actions:{stopPrint:"Ferma Stampa",startPrint:"Avvia Stampa",requeue:"Rimetti in coda"},bulkEdit:{title:"Modifica {{count}} elemento",title_plural:"Modifica {{count}} elementi",description:"Solo le impostazioni modificate saranno applicate agli elementi selezionati.",printer:"Stampante",noChange:"— Nessun cambio —",queueOptions:"Opzioni coda",staged:"In staging (avvio manuale)",autoPowerOff:"Spegnimento automatico dopo stampa",requirePrevious:"Richiede successo precedente",printOptions:"Opzioni stampa",bedLevelling:"Livellamento piatto",flowCalibration:"Calibrazione flusso",vibrationCalibration:"Calibrazione vibrazioni",layerInspection:"Controllo primo layer",timelapse:"Timelapse",useAms:"Usa AMS",applyChanges:"Applica modifiche",selectAll:"Seleziona tutto",deselectAll:"Deseleziona tutto",selected:"{{count}} selezionati",editSelected:"Modifica selezionati",cancelSelected:"Annulla selezionati"},confirm:{cancelTitle:"Annulla stampa programmata",cancelMessage:'Sei sicuro di annullare "{{name}}"?',stopTitle:"Ferma Stampa",stopMessage:'Sei sicuro di fermare la stampa corrente "{{name}}"? Questo annullerà il lavoro sulla stampante.',removeTitle:"Rimuovi dalla cronologia",removeMessage:'Sei sicuro di rimuovere "{{name}}" dalla cronologia coda?',clearHistoryTitle:"Svuota cronologia",clearHistoryMessage:"Sei sicuro di rimuovere {{count}} elemento(i) dalla cronologia?",cancelButton:"Annulla Stampa",stopButton:"Ferma Stampa",thisPrint:"questa stampa",thisItem:"questo elemento"},toast:{cancelled:"Elemento coda annullato",cancelFailed:"Annullamento non riuscito",removed:"Elemento coda rimosso",removeFailed:"Rimozione non riuscita",stopped:"Stampa fermata",stopFailed:"Impossibile fermare stampa",released:"Stampa rilasciata in coda",startFailed:"Avvio stampa non riuscito",reorderFailed:"Riordino coda non riuscito",historyCleared:"Cancellati {{count}} elementi cronologia",clearHistoryFailed:"Svuotamento cronologia non riuscito",updateFailed:"Aggiornamento elementi non riuscito",bulkCancelled:"Annullati {{count}} elementi",bulkCancelFailed:"Annullamento elementi non riuscito"},timeline:{listView:"Lista",timelineView:"Cronologia",unassigned:"Non assegnato",noData:"Nessuna stampa programmata per questo giorno",allDoneBy:"Tutte le stampe completate entro le {{time}}",staged:"In attesa",filterAll:"Mostra tutto",filterPrinting:"In stampa",filterQueued:"In coda",time:{anyMoment:"a momenti",minutesLeft:"{{minutes}}m rimanenti",hoursLeft:"{{hours}}h rimanenti",hoursMinutesLeft:"{{hours}}h {{minutes}}m rimanenti"},day:{previous:"Giorno precedente",next:"Giorno successivo",today:"Oggi"}},permissions:{noStopPrint:"Non hai il permesso di fermare stampe",noStartPrint:"Non hai il permesso di avviare stampe",noEdit:"Non hai il permesso di modificare questo elemento coda",noCancel:"Non hai il permesso di annullare questo elemento coda",noRequeue:"Non hai il permesso di rimettere in coda elementi",noRemove:"Non hai il permesso di rimuovere questo elemento coda",noClearHistory:"Non hai il permesso di svuotare tutta la cronologia",noEditItems:"Non hai il permesso di modificare elementi coda",noCancelItems:"Non hai il permesso di annullare elementi coda"}},backgroundDispatch:{unknownFile:"File sconosciuto",unknownPrinter:"Stampante sconosciuta",startingPrints:"Avvio stampe",progressSummary:"{{complete}}/{{total}} completati • Inviati: {{dispatched}} • In elaborazione: {{processing}}",expandDetails:"Espandi dettagli dispatch",collapseDetails:"Comprimi dettagli dispatch",dismissToast:"Chiudi notifica dispatch",cancelDispatchJob:"Annulla job dispatch",cancel:"Annulla",cancelling:"Annullamento…",awaitingPrinter:"In attesa della stampante…",status:{dispatched:"Inviato",processing:"In elaborazione",completed:"Completato",failed:"Fallito",cancelled:"Annullato"},toast:{cancellingUpload:"Annullamento upload...",cancelled:"Dispatch annullato",cancelFailed:"Impossibile annullare il dispatch",completeWithFailures:"Dispatch in background completato: {{completed}} riusciti, {{failed}} falliti",completeSuccess:"Dispatch in background completato: {{completed}} riusciti",printStartedRemaining:"{{completed}} stampa/e avviata/e, {{remaining}} in invio..."}},stats:{title:"Statistiche",subtitle:"Trascina i widget per riordinare. Clicca l'icona occhio per nascondere.",overview:"Panoramica",totalPrints:"Stampe totali",successRate:"Tasso di successo",totalPrintTime:"Tempo totale di stampa",printTime:"Tempo di stampa",totalFilament:"Filamento totale usato",filamentUsed:"Filamento usato",filamentCost:"Costo filamento",totalCost:"Costo totale",energyUsed:"Energia usata",energyCost:"Costo energia",energyWarmingUpTooltip:"Il tracciamento energia sta ancora raccogliendo snapshot orari. I totali per intervallo diventeranno accurati quando esisterà almeno uno snapshot prima dell’intervallo selezionato. I primi valori potrebbero essere sottostimati.",averagePrintTime:"Tempo medio di stampa",printsPerDay:"Stampe al giorno",byPrinter:"Per stampante",printsByPrinter:"Stampe per stampante",byMaterial:"Per materiale",byMonth:"Per mese",last7Days:"Ultimi 7 giorni",last30Days:"Ultimi 30 giorni",last90Days:"Ultimi 90 giorni",allTime:"Sempre",quickStats:"Statistiche rapide",printActivity:"Attivita di stampa",filamentTypes:"Tipi di filamento",filamentTrends:"Trend filamento",failureAnalysis:"Analisi guasti",timeAccuracy:"Accuratezza tempo",successful:"Riuscite:",failed:"Fallite:",cancelled:"Annullate:",perfectEstimate:"100% = stima perfetta",noTimeAccuracyData:"Nessun dato accuratezza tempo",noFilamentData:"Nessun dato filamento",noPrinterData:"Nessun dato stampante",noPrintData:"Nessun dato stampa",noPrintDataLast30Days:"Nessun dato stampa negli ultimi 30 giorni",failureReasons:"Cause guasto",topFailureReasons:"Cause principali",failedPrintsCount:"{{failed}} / {{total}} stampe fallite",lastWeekRate:"Settimana scorsa: {{rate}}%",resetLayout:"Reimposta layout",recalculateCosts:"Ricalcola costi",recalculateCostsHint:"Ricalcola tutti i costi archivi usando i prezzi filamento correnti",exportStats:"Esporta statistiche",exportAsCsv:"Esporta come CSV",exportAsExcel:"Esporta come Excel",hiddenCount:"{{count}} Nascosti",exportDownloaded:"Export scaricato",exportFailed:"Export non riuscito",layoutReset:"Layout reimpostato",recalculatedCosts:"Costi ricalcolati per {{count}} archivi",recalculateFailed:"Ricalcolo costi non riuscito",loadingStats:"Caricamento statistiche...",noPermissionResetLayout:"Non hai il permesso di reimpostare il layout",noPermissionRecalculate:"Non hai il permesso di ricalcolare i costi",noPrintDataInRange:"Nessun dato nel periodo selezionato",periodFilament:"Filamento utilizzato",periodCost:"Costo",avgPerPrint:"Media per stampa",usageOverTime:"Utilizzo nel tempo",filamentByWeight:"Peso",printDuration:"Durata stampa",printerUtilization:"Utilizzo stampante",filamentSuccess:"Successo per materiale",printHabits:"Abitudini di stampa",printTimeOfDay:"Ora di stampa",colorDistribution:"Distribuzione colori",noColorData:"Nessun dato colore disponibile",records:"Record",longestPrint:"Stampa più lunga",heaviestPrint:"Stampa più pesante",mostExpensivePrint:"Più costosa",busiestDay:"Giorno più attivo",successStreak:"Serie di successi",streakPrint:"stampa consecutiva",streakPrints:"{{count}} stampe consecutive",printerStats:"Statistiche stampante",hours:"ore",avgPrints:"Media stampe",noArchiveData:"Nessun dato di stampa disponibile",filamentByTime:"Tempo",avgWeight:"Media peso",avgTime:"Media tempo",filamentByPrints:"Stampe",timeframe:{today:"Oggi","this-week":"Questa settimana","this-month":"Questo mese","last-7":"Ultimi 7 giorni","last-30":"Ultimi 30 giorni","last-90":"Ultimi 90 giorni","this-year":"Quest'anno","all-time":"Tutto",custom:"Personalizzato",from:"Da",to:"A"},allUsers:"Tutti gli utenti",noUser:"Nessun utente (Sistema)",filterByUser:"Filtra per utente"},maintenance:{title:"Manutenzione",overview:"Panoramica",allOk:"Tutta la manutenzione aggiornata",dueCount:"{{count}} elemento in scadenza",dueCount_plural:"{{count}} elementi in scadenza",warningCount:"{{count}} avviso",warningCount_plural:"{{count}} avvisi",totalPrintTime:"Tempo totale di stampa",nextMaintenance:"Prossima manutenzione",nothingDue:"Niente in scadenza",tasks:"Attivita",lastPerformed:"Ultima esecuzione",interval:"Intervallo",hoursRemaining:"{{hours}}h rimanenti",hoursOverdue:"{{hours}}h in ritardo",markDone:"Segna come fatto",performMaintenance:"Esegui manutenzione",history:"Cronologia",noHistory:"Nessuna cronologia manutenzione",editPrintHours:"Modifica ore stampa",currentHours:"Ore attuali",statusTab:"Stato",settingsTab:"Impostazioni",overdueCount:"{{count}} in ritardo",dueSoonCount:"{{count}} in scadenza",dueSoon:"In scadenza",allGood:"Tutto ok",overdueBy:"In ritardo di {{duration}}",dueIn:"Scade tra {{duration}}",timeLeft:"{{duration}} rimanenti",day:"1 giorno",days:"{{count}} giorni",week:"1 settimana",weeks:"{{count}} settimane",month:"1 mese",months:"{{count}} mesi",year:"1 anno",maintenanceTypes:"Tipi di manutenzione",maintenanceTypesDescription:"Tipi di sistema e tue attivita personalizzate",addCustomType:"Aggiungi tipo personalizzato",restoreDefaults:"Ripristina attivita predefinite",intervalType:"Tipo intervallo",intervalValue:"Intervallo ({{type}})",icon:"Icona",documentationLink:"Link documentazione (opzionale)",assignToPrinters:"Assegna alle stampanti",selectAtLeastOnePrinter:"Seleziona almeno una stampante",addType:"Aggiungi tipo",custom:"Personalizzato",printHours:"Ore di stampa",calendarDays:"Giorni calendario",exampleName:"es. Sostituisci filtro HEPA",viewDocumentation:"Vedi documentazione",timeBasedInterval:"Intervallo basato sul tempo",intervalOverrides:"Override intervallo",intervalOverridesDescription:"Personalizza intervalli per stampanti specifiche",assignedToPrinters:"Assegnato alle stampanti:",noPrintersAssigned:"Nessuna stampante assegnata",addPrinterShort:"Aggiungi:",printersAssignedClick:"{{count}} stampante(i) assegnata - clicca per gestire",removeFromPrinter:"Rimuovi da questa stampante",types:{lubricateCarbonRods:"Lubrifica aste in carbonio",lubricateRails:"Lubrifica guide lineari",cleanNozzle:"Pulisci ugello/Hotend",checkBelts:"Controlla tensione cinghie",cleanBuildPlate:"Pulisci piatto",checkExtruder:"Controlla ingranaggi estrusore",checkCooling:"Controlla ventole raffreddamento",generalInspection:"Ispezione generale",cleanCarbonRods:"Pulisci aste in carbonio",lubricateSteelRods:"Lubrifica aste in acciaio",cleanSteelRods:"Pulisci aste in acciaio",cleanLinearRails:"Pulisci guide lineari",checkPtfeTube:"Controlla tubo PTFE",replaceHepaFilter:"Sostituisci filtro HEPA",replaceCarbonFilter:"Sostituisci filtro carbone",lubricateLeftNozzleRail:"Lubrifica guida ugello sinistro"},maintenanceComplete:"Manutenzione segnata come completata",typeUpdated:"Tipo manutenzione aggiornato",typeDeleted:"Tipo manutenzione eliminato",defaultsRestored:"Ripristinate {{count}} attivita predefinite",printHoursUpdated:"Ore di stampa aggiornate",printerAssigned:"Stampante assegnata",printerRemoved:"Stampante rimossa",deleteTypeConfirm:'Eliminare "{{name}}"?',deleteSystemTypeTitle:"Eliminare attività di manutenzione predefinita?",deleteSystemTypeMessage:`Sei sicuro di voler eliminare l'attività di manutenzione predefinita "{{name}}"?`,noPermissionUpdate:"Non hai il permesso di aggiornare elementi manutenzione",noPermissionPerform:"Non hai il permesso di eseguire manutenzione",noPermissionEditTypes:"Non hai il permesso di modificare tipi manutenzione",noPermissionDeleteTypes:"Non hai il permesso di eliminare tipi manutenzione",noPermissionEditHours:"Non hai il permesso di modificare ore stampa",noPermissionRemovePrinter:"Non hai il permesso di rimuovere assegnazioni stampanti",noPermissionAssignPrinter:"Non hai il permesso di assegnare stampanti",noPermissionEditIntervals:"Non hai il permesso di modificare intervalli",configureSettings:"Configura tipi e intervalli manutenzione"},settings:{title:"Impostazioni",general:"Generale",tabs:{general:"Generale",smartPlugs:"Prese smart",notifications:"Notifiche",queue:"Flusso",filament:"Filamento",network:"Rete",apiKeys:"Chiavi API",virtualPrinter:"Stampante virtuale",failureDetection:"Rilevamento guasti",users:"Utenti",backup:"Backup",emailAuth:"Autenticazione Email",ldap:"LDAP",twoFa:"Autenticazione 2FA",oidc:"SSO / OIDC",security:"Sicurezza",spoolbuddy:"SpoolBuddy"},ldap:{title:"Autenticazione LDAP",enabledDesc:"L'autenticazione LDAP è attiva",disabledDesc:"L'autenticazione LDAP è disattivata",disabledHint:"Configura e salva le impostazioni LDAP qui sotto, poi attiva.",enabled:"Autenticazione LDAP attivata",disabled:"Autenticazione LDAP disattivata",feature1:"Gli utenti possono accedere con le credenziali LDAP",feature2:"L'account amministratore locale rimane come fallback",feature3:"I gruppi LDAP vengono mappati ai gruppi BamBuddy al login",serverConfig:"Configurazione server LDAP",serverUrl:"URL del server",serverUrlHint:"Usa ldap:// per standard o ldaps:// per connessioni SSL",security:"Sicurezza",securityHint:"StartTLS aggiorna una connessione semplice a TLS. LDAPS usa TLS fin dall'inizio.",bindDn:"Bind DN (account di servizio)",bindPassword:"Password Bind",searchBase:"Base DN di ricerca",userFilter:"Filtro di ricerca utente",userFilterHint:"{username} viene sostituito con il nome utente. Usa (uid={username}) per OpenLDAP.",advanced:"Avanzate",autoProvision:"Provisioning automatico utenti",autoProvisionHint:"Crea automaticamente un account BamBuddy al primo accesso LDAP",defaultGroup:"Gruppo predefinito",defaultGroupNone:"— Nessuno (nessun fallback) —",defaultGroupHint:"Gruppo di fallback assegnato quando un utente LDAP si autentica ma non è presente in nessun gruppo LDAP mappato. Lascia vuoto per lasciare gli utenti non mappati senza autorizzazioni.",groupMapping:"Mappatura gruppi (JSON)",groupMappingHint:"Mappa i DN dei gruppi LDAP ai gruppi BamBuddy. Gruppi disponibili: ",testConnection:"Test connessione",settingsSaved:"Impostazioni LDAP salvate",errors:{serverRequired:"L'URL del server LDAP è obbligatorio",searchBaseRequired:"Il Base DN di ricerca è obbligatorio",enableAuthFirst:"Attiva prima l'autenticazione",configureLdapFirst:"Salva prima le impostazioni LDAP"}},email:{smtpSettings:"Configurazione SMTP",smtpHost:"Server SMTP",smtpPort:"Porta SMTP",security:"Sicurezza",authentication:"Autenticazione",username:"Nome utente",password:"Password",fromEmail:"Email mittente",fromName:"Nome mittente",testConnection:"Testa connessione SMTP",testRecipient:"Email destinatario test",sendTest:"Invia email di test",sending:"Invio...",save:"Salva impostazioni",saving:"Salvataggio...",advancedAuth:"Autenticazione avanzata",advancedAuthEnabled:"L'autenticazione avanzata è abilitata",advancedAuthEnabledDesc:"Le funzionalità di gestione utenti via email sono attive. I nuovi utenti riceveranno password generate automaticamente via email e potranno reimpostare la password tramite la funzione di recupero.",advancedAuthDisabled:"L'autenticazione avanzata è disabilitata",advancedAuthDisabledDesc:"Abilita l'autenticazione avanzata per attivare le funzionalità email per la gestione utenti.",enable:"Abilita",disable:"Disabilita",feature1:"Le password vengono generate automaticamente e inviate via email ai nuovi utenti",feature2:"Gli utenti possono accedere con nome utente o email",feature3:"La funzione di recupero password è disponibile",feature4:"Gli amministratori possono reimpostare le password utente via email",errors:{requiredFields:"Compilare tutti i campi obbligatori",usernameRequired:"Il nome utente è obbligatorio quando l'autenticazione è abilitata",enterTestEmail:"Inserire un indirizzo email di test",smtpServerAndEmail:"Compilare Server SMTP e Email mittente prima di testare",usernamePasswordRequired:"Nome utente e password sono obbligatori quando l'autenticazione è abilitata",configureSmtpFirst:"Configurare e testare le impostazioni SMTP prima",enableAuthFirst:"Per utilizzare le funzionalità basate sulla posta elettronica, è necessario prima abilitare l'autenticazione."},success:{settingsSaved:"Impostazioni SMTP salvate con successo"},securityOptions:{starttls:"STARTTLS (Porta 587)",ssl:"SSL/TLS (Porta 465)",none:"Nessuna (Porta 25)"},authOptions:{enabled:"Abilitata",disabled:"Disabilitata"}},appearance:"Aspetto",notifications:"Notifiche",smartPlugs:"Prese smart",spoolman:"Spoolman",updates:"Aggiornamenti",language:"Lingua",languageDescription:"Seleziona la lingua preferita",theme:"Tema",themeLight:"Chiaro",themeDark:"Scuro",themeSystem:"Sistema",defaultView:"Vista predefinita",defaultViewDescription:"Pagina da mostrare all'apertura dell'app",checkForUpdates:"Controlla aggiornamenti",autoUpdate:"Aggiornamento automatico",currentVersion:"Versione attuale",latestVersion:"Ultima versione",upToDate:"Sei aggiornato",updateAvailable:"Aggiornamento disponibile",notificationLanguage:"Lingua notifiche",notificationLanguageDescription:"Lingua per notifiche push",bedCooledThreshold:"Soglia raffreddamento piatto",bedCooledThresholdDescription:"Temperatura sotto la quale il piatto è considerato raffreddato dopo una stampa",userNotificationsEnabled:"Notifiche utente",userNotificationsEnabledDescription:"Abilita il menu notifiche utente e le notifiche e-mail per gli eventi di stampa. Richiede l'autenticazione avanzata.",userNotificationsDisabledHint:"Abilita l'autenticazione avanzata per usare le notifiche utente.",notificationProviders:"Provider notifiche",addProvider:"Aggiungi provider",editProvider:"Modifica provider",providerType:"Tipo provider",testNotification:"Notifica di test",testSuccess:"Notifica di test inviata",testFailed:"Invio notifica di test fallito",quietHours:"Ore silenziose",quietHoursDescription:"Non disturbare in queste ore",quietHoursStart:"Inizio",quietHoursEnd:"Fine",events:{title:"Eventi notifica",printStart:"Stampa avviata",printComplete:"Stampa completata",printFailed:"Stampa fallita",printStopped:"Stampa interrotta",printProgress:"Avanzamento",printProgressDescription:"Notifica al 25%, 50%, 75%",printerOffline:"Stampante offline",printerError:"Errore stampante",filamentLow:"Filamento in esaurimento",maintenanceDue:"Manutenzione dovuta",maintenanceDueDescription:"Notifica quando serve manutenzione"},smartPlug:{title:"Prese smart",add:"Aggiungi presa smart",edit:"Modifica presa smart",name:"Nome",ipAddress:"Indirizzo IP",linkedPrinter:"Stampante collegata",autoOn:"Accensione automatica",autoOnDescription:"Accendi all'avvio stampa",autoOff:"Spegnimento automatico",autoOffDescription:"Spegni dopo il completamento",offDelay:"Ritardo spegnimento",offDelayMinutes:"Minuti dopo la stampa",offDelayTemp:"Quando ugello sotto temperatura",currentState:"Stato attuale",turnOn:"Accendi",turnOff:"Spegni"},filamentTracking:"Tracciamento filamento",filamentTrackingDesc:"Scegli come tracciare le bobine di filamento. Puoi usare l'inventario integrato o collegare un server Spoolman esterno.",filamentChecks:"Controlli filamento",disableFilamentWarnings:"Disabilita avvisi filamento",disableFilamentWarningsDesc:"Non mostrare avvisi per filamento insufficiente durante la stampa o l'accodamento",preferLowestFilament:"Preferisci il filamento con meno residuo",preferLowestFilamentDesc:"Quando più bobine corrispondono, usa quella con meno filamento rimanente",trackingModeBuiltIn:"Inventario integrato",trackingModeBuiltInDesc:"Riconoscimento RFID automatico e tracciamento dell'uso inclusi",trackingModeSpoolmanDesc:"Server esterno per la gestione del filamento",builtInFeatureRfid:"Rileva automaticamente le bobine Bambu Lab RFID nell'AMS",builtInFeatureUsage:"Traccia il consumo di filamento per stampa",builtInFeatureCatalog:"Gestisci bobine, colori e profili K-factor",builtInFeatureThirdParty:"Le bobine di terze parti possono essere assegnate alle bobine dell'inventario",amsSyncButton:"Sincronizza pesi dall'AMS",amsSyncTitle:"Sincronizza pesi bobine dall'AMS",amsSyncMessage:"Questo sovrascriverà tutti i pesi delle bobine dell'inventario con i valori attuali di percentuale rimanente dell'AMS dalle stampanti connesse. Usa questa funzione per recuperare dati di peso corrotti. Le stampanti devono essere online.",amsSyncing:"Sincronizzazione...",amsSyncSuccess:"{{synced}} bobina/e sincronizzata/e, {{skipped}} saltata/e",amsSyncError:"Impossibile sincronizzare i pesi dall'AMS",spoolmanAmsSyncButton:"Sincronizza i pesi Spoolman dall'AMS",spoolmanAmsSyncTitle:"Sincronizza i pesi delle bobine Spoolman dall'AMS",spoolmanAmsSyncMessage:"Questo aggiornerà i pesi di tutte le bobine Spoolman in base ai valori di riempimento AMS correnti delle stampanti connesse. Le stampanti devono essere online.",spoolmanAmsSyncing:"Sincronizzazione...",spoolmanAmsSyncSuccess:"{{synced}} bobina/e sincronizzata/e, {{skipped}} saltata/e",spoolmanAmsSyncError:"Impossibile sincronizzare i pesi Spoolman dall'AMS",spoolmanAmsSyncErrorUnreachable:"Sincronizzazione fallita (Spoolman non raggiungibile)",spoolmanAmsSyncErrorNotConfigured:"Sincronizzazione fallita (Spoolman non configurato)",spoolmanNotConfigured:"Spoolman non configurato",spoolmanFilamentCatalogTitle:"Catalogo filamenti Spoolman",spoolmanFilamentCatalogDesc:"Nomi dei filamenti e pesi tara dalla tua istanza Spoolman. Nome e peso bobina sono modificabili qui; tutte le altre proprietà sono gestite direttamente in Spoolman.",spoolmanUrl:"URL Spoolman",spoolmanUrlHint:"URL del server Spoolman (es. http://localhost:7912)",spoolmanConnected:"Connesso",spoolmanDisconnected:"Disconnesso",status:"Stato",connect:"Connetti",disconnect:"Disconnetti",howSyncWorks:"Come funziona la sincronizzazione",syncInfoRfidOnly:"Solo le bobine ufficiali Bambu Lab con RFID vengono sincronizzate",syncInfoAutoCreate:"Le nuove bobine vengono create automaticamente in Spoolman alla prima sincronizzazione",syncInfoThirdPartySkipped:"Le bobine non Bambu Lab (terze parti, ricaricate) vengono saltate",linkingExistingSpools:"Collegamento bobine esistenti",linkingExistingSpoolsDesc:`Per collegare le bobine Spoolman esistenti all'AMS, passa il mouse su uno slot AMS e clicca "Collega a Spoolman".`,syncMode:"Modalità sincronizzazione",syncModeAuto:"Automatica",syncModeManual:"Solo manuale",syncModeAutoDesc:"I dati AMS si sincronizzano automaticamente quando vengono rilevate modifiche",syncModeManualDesc:"Sincronizzazione solo quando attivata manualmente",syncAmsData:"Sincronizza dati AMS",syncAmsDataDesc:"Sincronizza manualmente i dati AMS della stampante su Spoolman",allPrinters:"Tutte le stampanti",noDefaultPrinter:"Nessuna predefinita (chiedi ogni volta)",sidebarOrder:"Ordine barra laterale",saveThumbnails:"Salva miniature",captureFinishPhoto:"Acquisisci foto finale",noPrintersConfigured:"Nessuna stampante configurata",archiveMode:{always:"Crea sempre voce archivio",never:"Non creare mai voce archivio",ask:"Chiedi ogni volta"},checkForUpdatesLabel:"Controlla aggiornamenti",checkPrinterFirmware:"Controlla firmware stampante",includeBetaUpdates:"Includi versioni beta",includeBetaUpdatesDesc:"Notifica versioni beta e prerelease durante il controllo aggiornamenti",enableRetry:"Abilita retry",homeAssistantDescription:"Controlla prese smart tramite Home Assistant",environmentManagedLabel:"(Gestito dall'ambiente)",autoEnabledViaEnv:"Abilitato automaticamente tramite variabili d'ambiente",urlFromEnvReadOnly:"Valore impostato dalla variabile d'ambiente HA_URL (sola lettura)",tokenFromEnvReadOnly:"Valore impostato dalla variabile d'ambiente HA_TOKEN (sola lettura)",mqttConnectedTo:"Connesso a",prometheusDescription:"Esponi dati stampante in formato Prometheus",noSmartPlugsTitle:"Nessuna presa smart configurata",noSmartPlugsDescription:"Aggiungi una presa smart Tasmota per monitorare energia e automatizzare il controllo.",noProvidersTitle:"Nessun provider configurato",noProvidersDescription:"Aggiungi un provider per ricevere avvisi.",noTemplatesAvailable:"Nessun template disponibile. Riavvia il backend per generare i template predefiniti.",apiPermissionView:"Visualizza stato stampante e coda",apiPermissionEdit:"Aggiungi e rimuovi elementi dalla coda di stampa",apiKeysEmptyTitle:"Nessuna chiave API",apiKeysEmptyDescription:"Crea una chiave API per integrare servizi esterni.",noUsersFound:"Nessun utente trovato",noGroupsFound:"Nessun gruppo trovato",noGroupsAvailable:"Nessun gruppo disponibile",passwordsDoNotMatch:"Le password non coincidono",systemGroupWarning:"I nomi dei gruppi di sistema non possono essere modificati",authDisabledTitle:"Autenticazione disabilitata",authDisabledFeature1:"Richiedi accesso per usare il sistema",authDisabledFeature2:"Crea più utenti con permessi basati sui gruppi",authDisabledFeature3:"Controlla accesso con 50+ permessi granulari",userHasCreated:"Questo utente ha creato:",userItemsQuestion:"Cosa vuoi fare con questi elementi?",deleteUserConfirm:"Sei sicuro di voler eliminare questo utente?",actionCannotBeUndone:"Questa azione non può essere annullata.",addFirstSmartPlug:"Aggiungi la tua prima presa smart",providers:"Provider",log:"Registro",testAll:"Testa tutto",testResults:"Risultati test",testPassedCount:"{{count}} riusciti",testFailedCount:"{{count}} falliti",messageTemplates:"Template messaggi",messageTemplatesDescription:"Personalizza i messaggi per ogni evento.",apiKeys:"Chiavi API",apiKeysDescription:"Crea chiavi API per integrazioni esterne e webhook.",createKey:"Crea chiave",apiKeyCreated:"Chiave API creata con successo",apiKeyCopyWarning:"Copia questa chiave ora - non verra mostrata di nuovo!",useInApiBrowser:"Usa nel Browser API",createNewApiKey:"Crea nuova chiave API",keyName:"Nome chiave",keyNamePlaceholder:"es., Home Assistant, OctoPrint",readStatus:"Leggi stato",readStatusDescription:"Visualizza stato stampante e coda",manageQueue:"Gestisci coda",manageQueueDescription:"Aggiungi e rimuovi elementi dalla coda di stampa",controlPrinter:"Controlla stampante",controlPrinterDescription:"Metti in pausa, riprendi e ferma stampe",manageLibrary:"Gestisci libreria",manageLibraryDescription:"Carica, rinomina ed elimina file della libreria; importa modelli da MakerWorld",manageInventory:"Gestisci inventario",manageInventoryDescription:"Crea, aggiorna ed elimina bobine e voci di inventario. Necessario per i chioschi SpoolBuddy (scansione NFC, letture della bilancia, comandi di sistema del chiosco).",libraryBadge:"Libreria",inventoryBadge:"Inventario",cloudAccess:"Consenti accesso cloud",cloudAccessDescription:"Legge i preset e i filamenti Bambu Cloud per tuo conto. Richiede l'accesso a Bambu Cloud.",cloudBadge:"Cloud",updateEnergyCost:"Aggiorna prezzo elettricità",updateEnergyCostDescription:"Consenti a questa chiave di inviare in POST un nuovo prezzo elettricità per kWh a /settings/electricity-price. Utile per automazioni Home Assistant a tariffa dinamica (Tibber, Octopus, ecc.). Questo è l'unico campo di impostazioni scrivibile via API key.",energyCostBadge:"Energia",legacyKey:"Legacy",legacyKeyTooltip:"Creato prima della proprietà per utente; ricreare per accesso cloud",unnamedKey:"Chiave senza nome",lastUsed:"Ultimo uso",read:"Lettura",control:"Controllo",createFirstKey:"Crea la tua prima chiave",webhookEndpoints:"Endpoint webhook",webhookApiKeyHint:"Usa la tua chiave API nell'header X-API-Key.",webhook:{getAllStatus:"Ottieni stato di tutte le stampanti",getSpecificStatus:"Ottieni stato di una stampante",addToQueue:"Aggiungi alla coda di stampa",pausePrint:"Metti in pausa stampa",resumePrint:"Riprendi stampa",stopPrint:"Ferma stampa"},apiBrowser:"Browser API",apiBrowserDescription:"Esplora e testa tutti gli endpoint API disponibili.",apiKeyForTesting:"Chiave API per test",apiKeyPlaceholder:"Incolla qui la tua chiave API per testare gli endpoint autenticati...",apiKeyHint:"Questa chiave verra inviata come header X-API-Key.",deleteApiKeyTitle:"Elimina chiave API",deleteApiKeyMessage:"Sei sicuro di voler eliminare questa chiave API? Le integrazioni che la usano non funzioneranno più.",deleteKey:"Elimina chiave",amsDisplayThresholds:"Soglie visualizzazione AMS",amsThresholdsDescription:"Configura soglie colore per umidità e temperatura AMS.",humidity:"Umidità",goodGreen:"Buono (verde)",fairOrange:"Discreto (arancione)",aboveFairBad:"Sopra soglia discreta mostra rosso (scarso)",fairAlsoDryingThreshold:"Questa soglia viene usata anche per attivare l'asciugatura automatica",temperature:"Temperatura",goodBlue:"Buono (blu)",aboveFairHot:"Sopra soglia discreta mostra rosso (caldo)",historyRetention:"Conservazione cronologia",keepSensorHistory:"Mantieni cronologia sensori per",historyRetentionDescription:"I dati più vecchi saranno eliminati automaticamente",defaultPrintOptions:"Opzioni di stampa predefinite",defaultPrintOptionsDescription:"Imposta i valori predefiniti per le opzioni di stampa. Possono essere modificati nella finestra di stampa.",defaultBedLevelling:"Livellamento piatto",defaultBedLevellingDesc:"Livellamento automatico del piatto prima della stampa",defaultFlowCali:"Calibrazione flusso",defaultFlowCaliDesc:"Calibra il flusso di estrusione",defaultVibrationCali:"Calibrazione vibrazioni",defaultVibrationCaliDesc:"Riduce gli artefatti di ringing",defaultLayerInspect:"Ispezione primo strato",defaultLayerInspectDesc:"Ispezione IA del primo strato",defaultTimelapse:"Timelapse",defaultTimelapseDesc:"Registra un video timelapse",staggeredStart:"Avvio scaglionato",staggeredStartDescription:"Dimensione gruppo e intervallo predefiniti per scaglionare avvii di batch multi-stampante. Sovrascrivibili per batch nella finestra di stampa.",plateClear:"Conferma piatto libero",requirePlateClear:"Richiedi conferma piatto libero",requirePlateClearDescription:'Quando questa opzione è abilitata, lo scheduler attende una conferma per stampante che il piatto sia libero prima di avviare le stampe in coda su stampanti con lavori completati. Disabilitandola vengono nascosti anche il badge di stato del piatto e il pulsante "Segna il piatto come liberato" sulle schede stampante.',gcodeInjection:"Iniezione G-code",gcodeInjectionDescription:`Configura G-code personalizzato da iniettare all'inizio e/o alla fine delle stampe per sistemi di stampa automatica come Farmloop, SwapMod, AutoClear e Printflow 3D. Gli snippet sono configurati per modello di stampante e applicati quando "Inietta G-code" è abilitato su un elemento della coda.`,gcodeInjectionNoPrinters:"Nessuna stampante trovata. Aggiungi stampanti per configurare gli snippet G-code.",gcodeStartLabel:"G-code iniziale",gcodeEndLabel:"G-code finale",gcodeStartPlaceholder:"G-code inserito prima dell'inizio della stampa...",gcodeEndPlaceholder:"G-code aggiunto dopo la fine della stampa...",staggerGroupSize:"Dimensione gruppo",staggerGroupSizeHelp:"Stampanti da avviare simultaneamente per gruppo",staggerInterval:"Intervallo (minuti)",staggerIntervalHelp:"Ritardo tra l'avvio di ogni gruppo",queueDrying:"Asciugatura automatica",queueDryingDescription:"Asciugare automaticamente il filamento AMS quando la stampante è inattiva tra le stampe in coda. Usa la soglia di umidità sopra.",queueDryingEnabled:"Abilita asciugatura automatica",queueDryingEnabledDescription:"Avvia l'asciugatura AMS automaticamente quando la stampante è inattiva e l'umidità supera la soglia",queueDryingBlock:"Attendi completamento asciugatura",queueDryingBlockDescription:"Blocca la coda di stampa fino al completamento dell'asciugatura. Se disattivato, le stampe hanno priorità.",ambientDryingEnabled:"Asciugatura ambientale",ambientDryingEnabledDescription:"Asciuga automaticamente il filamento sulle stampanti inattive quando l'umidità supera la soglia, anche senza stampe in coda.",dryingPresets:"Preset di asciugatura",dryingPresetsDescription:"Temperatura e durata per tipo di filamento. AMS 2 Pro usa temperature più basse, AMS-HT supporta temperature più alte.",dryingFilament:"Filamento",printModal:"Modale stampa",expandCustomMapping:"Espandi mapping personalizzato di default",expandCustomMappingDescription:"Quando stampi su più stampanti, mostra mapping AMS per stampante espanso",authentication:"Autenticazione",authEnabledDescription:"La tua istanza è protetta con autenticazione",authDisabledDescription:"Abilita per richiedere accesso e gestire utenti",authDisabledMessage:"Abilita autenticazione per creare account, gestire permessi e proteggere la tua istanza Bambuddy.",enableAuthentication:"Abilita autenticazione",currentUser:"Utente corrente",changePassword:"Cambia password",admin:"Amministratore",users:"Utenti",addUser:"Aggiungi utente",groups:"Gruppi",addGroup:"Aggiungi gruppo",system:"Sistema",noDescription:"Nessuna descrizione",userCount:"{{count}} utenti",permissionCount:"{{count}} permessi",createUser:"Crea utente",username:"Nome utente",enterUsername:"Inserisci nome utente",password:"Password",enterPassword:"Inserisci password",passwordRequirements:"Almeno 8 caratteri, con una maiuscola, una minuscola, una cifra e un carattere speciale.",confirmPassword:"Conferma password",confirmPasswordPlaceholder:"Conferma password",viewReleaseOnGitHub:"Vedi release su GitHub",turnAllPlugsOn:"Accendi tutte le prese",turnAllPlugsOff:"Spegni tutte le prese",clearNotificationLogs:"Cancella log notifiche",clearLogsMessage:"Questo eliminerà definitivamente tutti i log notifiche più vecchi di 30 giorni. Questa azione non può essere annullata.",clearLogs:"Cancella log",resetUiPreferences:"Reimposta preferenze UI",resetUiPreferencesMessage:"Questo reimposterà le preferenze UI ai valori predefiniti: ordine barra laterale, tema, layout dashboard, modalità vista e preferenze ordinamento. Stampanti, archivi e impostazioni server NON saranno modificati. La pagina si ricaricherà dopo la cancellazione.",resetPreferences:"Reimposta preferenze",deleteGroupTitle:"Elimina gruppo",deleteGroupMessage:"Sei sicuro di voler eliminare questo gruppo? Gli utenti in questo gruppo perderanno questi permessi.",deleteGroup:"Elimina gruppo",disableAuthenticationTitle:"Disabilita autenticazione",disableAuthenticationMessage:"Sei sicuro di voler disabilitare l'autenticazione? Questo renderà la tua istanza Bambuddy accessibile senza login. Tutti gli utenti resteranno nel database ma l'autenticazione sarà disabilitata.",disableAuthentication:"Disabilita autenticazione",configureBambuddy:"Configura Bambuddy",systemDefault:"Predefinito di sistema",archiveSettings:"Impostazioni archivio",newWindow:"Nuova finestra",embeddedOverlay:"Overlay incorporato",preferredSlicer:"Slicer preferito",preferredSlicerDescription:"Scegli quale applicazione slicer usare per aprire i file",orcaslicerKnownIssuesWarning:"OrcaSlicer 2.3.2 / 2.4.0-dev hanno bug CLI noti che bloccano lo slicing di molti 3MF creati da Bambu — vedi le issue upstream #12426 (segfault su file multi-estrusore dipinti) e #13386 (rifiuto della validazione rigorosa dei range di parametri). Bambu Studio è raccomandato finché non arrivano le correzioni upstream.",useSlicerApi:"Usa Slicer API",useSlicerApiDescription:'Se attivo, le azioni "Slice" aprono il modale slicer integrato e chiamano il sidecar slicer-API. Se disattivo (predefinito), inoltrano al slicer desktop tramite schema URI.',slicerCard:"Slicer",orcaslicerApiUrl:"OrcaSlicer sidecar URL",bambuStudioApiUrl:"Bambu Studio sidecar URL",slicerApiUrlDescription:"URL del container sidecar slicer-API. Lascia vuoto per usare le variabili d'ambiente SLICER_API_URL / BAMBU_STUDIO_API_URL.",slicerBundles:{title:"Bundle slicer",description:'Importa un Printer Preset Bundle (.bbscfg) esportato da BambuStudio (File → Esporta → Esporta bundle preset → "Printer preset bundle"). Una volta importato, le richieste di slicing possono scegliere preset dal bundle per nome senza ricaricare il triplet di profili JSON.',uploadButton:"Carica bundle",uploading:"Caricamento…",loading:"Caricamento bundle…",empty:"Nessun bundle importato ancora.",summary:"{{processCount}} processo · {{filamentCount}} preset filamento",delete:"Elimina",uploadSuccess:"{{name}} importato",uploadError:"Caricamento bundle fallito: {{message}}",deleteSuccess:"Bundle rimosso",deleteError:"Eliminazione bundle fallita: {{message}}",confirmDeleteTitle:"Rimuovere questo bundle?",confirmDeleteMessage:'Le richieste di slicing che fanno riferimento a "{{name}}" falliranno fino al re-import del bundle.'},externalCameras:"Camere esterne",costTracking:"Tracciamento costi",printsOnly:"Solo stampe",totalConsumption:"Consumo totale",dataManagement:"Gestione dati",storageUsage:"Memoria utilizzata",storageUsageDescription:"Ripartizione della memoria per categoria",storageUsageTotal:"Totale",storageUsageErrors:"Errori",storageUsageOtherBreakdown:"Altro (include risorse statiche, script e file di configurazione)",storageUsageSystem:"Sistema",storageUsageData:"Dati",storageUsageUnavailable:"Informazioni sull'utilizzo della memoria non disponibili",clearNotificationLogsDescription:"Elimina log notifiche più vecchi di 30 giorni",resetUiPreferencesDescription:"Reimposta ordine barra laterale, tema, modalità vista e preferenze layout. Stampanti, archivi e impostazioni non vengono modificati.",enableHomeAssistant:"Abilita Home Assistant",enableMqtt:"Abilita MQTT",useTls:"Usa TLS",enableMetricsEndpoint:"Abilita endpoint metriche",availableMetrics:"Metriche disponibili",editUser:"Modifica utente",deleteUserTitle:"Elimina utente",groupName:"Nome gruppo",leaveEmptyForAnonymous:"Lascia vuoto per anonimo",leaveEmptyForNoAuth:"Lascia vuoto per nessuna autenticazione",enterNewPassword:"Inserisci nuova password",confirmNewPassword:"Conferma nuova password",enterGroupName:"Inserisci nome gruppo",enterDescriptionOptional:"Inserisci descrizione (opzionale)",enterCurrentPassword:"Inserisci password attuale",enterNewPasswordMin6:"Inserisci nuova password (min 6 caratteri)",toast:{keyCopied:"Chiave copiata negli appunti",copyFailed:"Copia chiave fallita",keyAddedToBrowser:"Chiave aggiunta al Browser API",clearLogsFailed:"Eliminazione log fallita",uiPreferencesReset:"Preferenze UI reimpostate. Aggiornamento...",authDisabled:"Autenticazione disabilitata con successo",authDisableFailed:"Disabilitazione autenticazione fallita",apiKeyCreated:"Chiave API creata",apiKeyDeleted:"Chiave API eliminata",userCreated:"Utente creato con successo",userUpdated:"Utente aggiornato con successo",userDeleted:"Utente eliminato con successo",groupCreated:"Gruppo creato con successo",groupUpdated:"Gruppo aggiornato con successo",groupDeleted:"Gruppo eliminato con successo",fillRequiredFields:"Compila tutti i campi obbligatori",passwordsDoNotMatch:"Le password non coincidono",passwordTooShort:"La password deve essere di almeno 8 caratteri",passwordNeedsUppercase:"La password deve contenere almeno una lettera maiuscola",passwordNeedsLowercase:"La password deve contenere almeno una lettera minuscola",passwordNeedsDigit:"La password deve contenere almeno una cifra",passwordNeedsSpecial:"La password deve contenere almeno un carattere speciale",enterGroupName:"Inserisci un nome gruppo",settingsSaved:"Impostazioni salvate",noPermissionUpdate:"Non hai il permesso di modificare le impostazioni",cameraSettingsSaved:"Impostazioni camera salvate",enterCameraUrl:"Inserisci un URL camera",passwordChanged:"Password cambiata con successo",connectionFailed:"Connessione fallita",testFailed:"Test fallito",cameraConnected:"Camera connessa{{resolution}}"},testConnection:"Testa connessione",catalog:{spoolCatalog:"Catalogo bobine",spoolCatalogDescription:"Pesi delle bobine vuote per marca/tipo. Utilizzato per la ricerca automatica del peso quando si aggiungono bobine.",searchCatalog:"Cerca nel catalogo...",addNewEntry:"Aggiungi nuova voce",namePlaceholder:"Nome (es. Bambu Lab - Plastica)",weight:"Peso",type:"Tipo",default:"Predefinito",custom:"Personalizzato",noMatch:"Nessuna voce corrisponde alla ricerca",empty:"Nessuna voce nel catalogo",deleteEntry:"Elimina voce",deleteConfirm:'Sei sicuro di voler eliminare "{{name}}"?',resetCatalog:"Ripristina catalogo",resetConfirm:"Ripristinare il catalogo ai valori predefiniti? Tutte le voci personalizzate verranno rimosse.",loadFailed:"Impossibile caricare il catalogo bobine",nameWeightRequired:"Nome e peso sono obbligatori",entryAdded:"Voce aggiunta",addFailed:"Impossibile aggiungere la voce",entryUpdated:"Voce aggiornata",updateFailed:"Impossibile aggiornare la voce",entryDeleted:"Voce eliminata",deleteFailed:"Impossibile eliminare la voce",resetSuccess:"Catalogo ripristinato ai valori predefiniti",resetFailed:"Impossibile ripristinare il catalogo",exported:"{{count}} voci esportate",imported:"{{added}} voci importate ({{skipped}} saltate)",importFailed:"Impossibile importare: formato JSON non valido",exportTooltip:"Esporta catalogo in JSON",importTooltip:"Importa catalogo da JSON",resetTooltip:"Ripristina valori predefiniti",selectedCount:"{{count}} selezionati",deleteSelected:"Elimina selezionati",bulkDeleteConfirm:"Eliminare {{count}} voci?",bulkDeleted:"{{count}} voci eliminate",bulkDeleteFailed:"Impossibile eliminare le voci",material:"Materiale",spoolWeight:"Peso bobina",color:"Colore",updateSpoolWeight:"Aggiorna peso bobina",filamentUpdated:"Filamento aggiornato",filamentUpdateFailed:"Aggiornamento filamento non riuscito",filamentUpdateInvalid:"Dati filamento non validi",keepExistingSpoolWeight:"Mantieni vecchio peso per le bobine esistenti",keepExistingSpoolWeightDesc:"Le bobine già create con questo tipo di filamento mantengono il vecchio peso tara. Le nuove bobine usano il valore aggiornato.",applyToAllSpools:"Applica a tutte le bobine",applyToAllSpoolsDesc:"Tutti i calcoli del peso per questo tipo di filamento usano immediatamente il nuovo peso tara."},colorCatalog:{title:"Catalogo colori",description:"Colori del filamento per produttore/materiale. Utilizzato per la ricerca automatica del colore quando si aggiungono bobine.",searchColors:"Cerca colori...",allManufacturers:"Tutti i produttori",addNewColor:"Aggiungi nuovo colore",manufacturer:"Produttore",colorName:"Nome colore",hex:"Hex",materialOptional:"Materiale (opzionale)",showing:"Visualizzazione di {{filtered}} su {{total}} colori",noMatch:"Nessun colore corrisponde alla ricerca",empty:"Nessun colore nel catalogo",deleteColor:"Elimina colore",deleteConfirm:'Sei sicuro di voler eliminare "{{name}}"?',resetCatalog:"Ripristina catalogo colori",resetConfirm:"Ripristinare il catalogo ai valori predefiniti? Tutti i colori personalizzati verranno rimossi.",sync:"Sincronizza",starting:"Avvio...",syncTooltip:"Sincronizza da FilamentColors.xyz (2000+ colori, potrebbe richiedere un minuto)",loadFailed:"Impossibile caricare il catalogo colori",fieldsRequired:"Produttore, nome colore e colore hex sono obbligatori",colorAdded:"Colore aggiunto",addFailed:"Impossibile aggiungere il colore",colorUpdated:"Colore aggiornato",updateFailed:"Impossibile aggiornare il colore",colorDeleted:"Colore eliminato",deleteFailed:"Impossibile eliminare il colore",resetSuccess:"Catalogo colori ripristinato ai valori predefiniti",resetFailed:"Impossibile ripristinare il catalogo",syncUpToDate:"Già aggiornato ({{count}} colori verificati)",syncComplete:"{{added}} nuovi colori aggiunti ({{skipped}} già esistenti)",syncError:"Errore di sincronizzazione",syncFailed:"Impossibile sincronizzare da FilamentColors.xyz",exported:"{{count}} colori esportati",imported:"{{added}} colori importati ({{skipped}} saltati)",importFailed:"Impossibile importare: formato JSON non valido",selectedCount:"{{count}} selezionati",deleteSelected:"Elimina selezionati",bulkDeleteConfirm:"Eliminare {{count}} colori?",bulkDeleted:"{{count}} colori eliminati",bulkDeleteFailed:"Impossibile eliminare i colori"},dateFormat:"Formato data",dateFormatUs:"US (MM/GG/AAAA)",dateFormatEu:"EU (GG/MM/AAAA)",dateFormatIso:"ISO (AAAA-MM-GG)",timeFormat:"Formato ora",timeFormat12:"12 ore (3:30 PM)",timeFormat24:"24 ore (15:30)",defaultPrinter:"Stampante predefinita",defaultPrinterDescription:"Preseleziona questa stampante per upload, ristampe e altre operazioni.",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"Trascina gli elementi nella barra laterale per riordinare. Ripristina l'ordine predefinito qui.",setDefault:"Imposta predefinito",sidebarOrderSetDefaultHint:"Imposta predefinito applica l'ordine attuale del menu agli utenti che non hanno ancora personalizzato il proprio.",sidebarDefaultSet:"L'ordine predefinito del menu è stato impostato.",sidebarDefaultCleared:"Ordine predefinito del menu cancellato.",sidebarDefaultFailed:"Impossibile impostare l'ordine predefinito del menu.",reset:"Ripristina",darkMode:"Modalità scura",lightMode:"Modalità chiara",active:"(attivo)",background:"Sfondo",accent:"Accento",style:"Stile",bgNeutral:"Neutro",bgWarm:"Caldo",bgCool:"Freddo",bgOled:"OLED Nero",bgSlate:"Blu ardesia",bgForest:"Verde foresta",accentGreen:"Verde",accentTeal:"Verde acqua",accentBlue:"Blu",accentOrange:"Arancione",accentPurple:"Viola",accentRed:"Rosso",styleClassic:"Classico",styleGlow:"Luminoso",styleVibrant:"Vibrante",themeToggleHint:"Passa tra modalità scura, chiara e sistema con l'icona nella barra laterale.",autoArchivePrints:"Archiviazione automatica stampe",autoArchiveDescription:"Salva automaticamente i file 3MF al completamento delle stampe",saveThumbnailsDescription:"Estrai e salva le immagini di anteprima dai file 3MF",captureFinishPhotoDescription:"Scatta una foto dalla fotocamera della stampante al completamento della stampa",ffmpegNotInstalled:"ffmpeg non installato",ffmpegRequired:"L'acquisizione dalla fotocamera richiede ffmpeg. Installalo tramite <brew>brew install ffmpeg</brew> (macOS) o <apt>apt install ffmpeg</apt> (Linux).",camera:"Fotocamera",cameraViewMode:"Modalità visualizzazione fotocamera",cameraOverlayDescription:"La fotocamera si apre in un overlay ridimensionabile sulla schermata principale",cameraWindowDescription:"La fotocamera si apre in una finestra separata del browser",externalCamerasDescription:"Configura fotocamere esterne per sostituire la fotocamera integrata della stampante. Supporta stream MJPEG, RTSP, snapshot HTTP e fotocamere USB (V4L2). Quando abilitata, la fotocamera esterna viene usata per la vista in diretta e le foto di completamento.",cameraPlaceholderUsb:"Percorso dispositivo (/dev/video0)",cameraPlaceholderUrl:"URL fotocamera (rtsp://... o http://...)",cameraTypeMjpeg:"Stream MJPEG",cameraTypeRtsp:"Stream RTSP",cameraTypeSnapshot:"Snapshot HTTP",cameraTypeUsb:"Fotocamera USB (V4L2)",cameraSnapshotUrl:"URL istantanea (facoltativo)",cameraSnapshotUrlPlaceholder:"http://192.168.1.61:1984/api/frame.jpeg?src=printer",cameraSnapshotUrlHelp:"URL singolo frame usato per miniature di notifica, foto di fine, frame del layer timelapse e rilevamento del piano. Timelapse e rilevamento del piano richiedono ciascuno il proprio toggle per stampante — questo URL è solo la sorgente immagine che usano quando attivi. Lascia vuoto per acquisire dallo stream live sopra. Utile per go2rtc (/api/frame.jpeg) e telecamere IP con endpoint snapshot dedicato.",cameraRotation:"Rotazione",test:"Test",connected:"Connesso",disconnected:"Disconnesso",currency:"Valuta",defaultFilamentCost:"Costo filamento predefinito (per kg)",electricityCost:"Costo elettricità per kWh",energyDisplayMode:"Modalità visualizzazione energia",energyModePrintDescription:"La dashboard mostra la somma dell'energia usata durante le stampe",energyModeTotalDescription:"La dashboard mostra l'energia totale dalle prese smart",fileManager:"Gestore file",createArchiveEntry:"Crea voce archivio durante la stampa",createArchiveEntryDescription:"Quando si stampa dal gestore file, crea opzionalmente una voce di archivio",lowDiskSpaceWarning:"Avviso spazio disco insufficiente",lowDiskSpaceDescription:"Mostra avviso quando lo spazio disco scende sotto questa soglia",printerFirmware:"Firmware stampante",checkFirmwareDescription:"Controlla aggiornamenti firmware da Bambu Lab",bambuddySoftware:"Software Bambuddy",autoCheckDescription:"Controlla automaticamente nuove versioni all'avvio",checkNow:"Controlla ora",updateAvailableVersion:"Aggiornamento disponibile: v{{version}}",releaseNotes:"Note di rilascio",updateViaDocker:"Aggiorna tramite Docker Compose:",updateViaHomeAssistant:"Gli aggiornamenti sono gestiti dal Supervisor di Home Assistant. Apri Impostazioni → Add-on → Bambuddy in Home Assistant per installare la nuova versione.",installUpdate:"Installa aggiornamento",latestVersionRunning:"Stai usando l'ultima versione",failedToCheckUpdates:"Controllo aggiornamenti fallito: {{error}}",backupRestore:"Backup e ripristino",backupRestoreDescription:"Esporta/importa impostazioni e configura backup GitHub",goToBackup:"Vai al backup",externalUrl:"URL esterno",externalUrlDescription:"L'URL esterno dove Bambuddy è accessibile. Usato per immagini di notifica e integrazioni esterne.",bambuddyUrl:"URL Bambuddy",externalUrlHint:"Includi protocollo e porta (es. http://192.168.1.100:8000)",ftpRetry:"Riprova FTP",ftpRetryDescription:"Riprova le operazioni FTP quando il WiFi della stampante è instabile. Si applica a download 3MF, upload stampe, download timelapse e aggiornamenti firmware.",autoRetryDescription:"Riprova automaticamente le operazioni FTP fallite",retryAttempts:"Tentativi di ripetizione",retryDelay:"Ritardo ripetizione",connectionTimeout:"Timeout connessione",time_one:"{{count}} volta",time_other:"{{count}} volte",second_one:"{{count}} secondo",second_other:"{{count}} secondi",nSeconds:"{{count}} secondi",increaseForWeakWifi:"Aumenta per stampanti con WiFi debole",homeAssistant:"Home Assistant",homeAssistantFullDescription:"Connetti a Home Assistant per controllare le prese smart tramite l'API REST HA. Supporta entità switch, light, input_boolean e script.",homeAssistantUrl:"URL Home Assistant",longLivedAccessToken:"Token di accesso a lunga durata",haTokenHint:"Crea un token in HA: Profilo → Token di accesso a lunga durata → Crea token",connectionSuccessful:"Connessione riuscita",connectionFailed:"Connessione fallita",haConnectionSuccess:"Connesso con successo a Home Assistant.",haConnectionFailed:"Connessione a Home Assistant fallita.",mqttPublishing:"Pubblicazione MQTT",mqttDescription:"Pubblica eventi BamBuddy su un broker MQTT esterno per l'integrazione con Node-RED, Home Assistant e altri sistemi di automazione.",mqttEnableDescription:"Pubblica eventi su broker MQTT esterno",brokerHostname:"Hostname broker",port:"Porta",usernameOptional:"Nome utente (opzionale)",passwordOptional:"Password (opzionale)",topicPrefix:"Prefisso topic",topicPrefixHint:"I topic saranno: {{prefix}}/printers/<serial>/status, ecc.",prometheusMetrics:"Metriche Prometheus",prometheusEndpointDescription:"Esponi metriche stampante su <code>/api/v1/metrics</code> per monitoraggio Prometheus/Grafana.",bearerTokenOptional:"Token Bearer (opzionale)",bearerTokenHint:"Se impostato, le richieste devono includere <code>Authorization: Bearer <token></code>",metricsConnectionStatus:"Stato connessione",metricsPrinterState:"Stato stampante (idle/printing/ecc)",metricsPrintProgress:"Progresso stampa 0-100%",metricsBedTemp:"Temperatura piatto",metricsNozzleTemp:"Temperatura ugello",metricsPrintsTotal:"Stampe totali per risultato",metricsMore:"...e altro (strati, ventole, coda, consumo filamento)",smartPlugsDescription:"Connetti prese smart (Tasmota o Home Assistant) per automatizzare il controllo dell'alimentazione e monitorare il consumo energetico delle stampanti.",allOn:"Tutte accese",allOff:"Tutte spente",addSmartPlug:"Aggiungi presa smart",energySummary:"Riepilogo energia",currentPower:"Potenza attuale",plugsOnline:"{{reachable}}/{{total}} prese online",today:"Oggi",yesterday:"Ieri",total:"Totale",enablePlugsForSummary:"Abilita le prese per vedere il riepilogo energia",addNotificationProvider:"Aggiungi",systemBadge:"(Sistema)",creating:"Creazione...",changing:"Modifica...",deleteUserAndItems:"Elimina utente E i suoi elementi",deleteUserKeepItems:"Elimina utente, mantieni elementi (diventeranno senza proprietario)",ok:"OK",twoFa:{totpTitle:"App Authenticator (TOTP)",totpDesc:"Usa un'app come Google Authenticator, Aegis o Authy.",emailOtpTitle:"OTP via e-mail",emailOtpDesc:"Invia un codice monouso a {{email}} al momento del login.",emailOtpNoEmail:"Aggiungi un indirizzo e-mail al tuo account per abilitare questo metodo.",addEmailFirst:"Il tuo account non ha un indirizzo e-mail. Chiedi a un amministratore di aggiungerne uno.",setupTotp:"Configura app Authenticator",setupAuthApp:"Configura app Authenticator",setupInstructions:"Scansiona il codice QR con la tua app authenticator, poi conferma con un codice.",manualEntry:"Impossibile scansionare? Inserisci questo segreto manualmente:",scannedContinue:"Codice scansionato — continua",enterCodeToConfirm:"Inserisci il codice a 6 cifre dalla tua app authenticator per confermare.",activate:"Attiva",disableTotp:"Disabilita Authenticator",disableConfirmHint:"Inserisci un codice TOTP valido o un codice di backup per disabilitare l'authenticator.",totpDisabled:"App Authenticator disabilitata.",emailOtpEnabled:"OTP via e-mail abilitato.",emailOtpDisabled:"OTP via e-mail disabilitato.",smtpRequired:"Configura e testa prima le impostazioni SMTP.",invalidCode:"Codice non valido. Riprova.",enableEmailOtp:"Abilita OTP via e-mail",disableEmailOtp:"Disabilita OTP via e-mail",emailSetupEnterCode:"È stato inviato un codice di verifica al tuo indirizzo e-mail. Inseriscilo qui sotto per confermare che possiedi questa casella di posta.",verifyAndEnable:"Verifica e abilita",emailDisablePasswordHint:"Inserisci la password del tuo account per confermare la disabilitazione dell'OTP via e-mail.",passwordPlaceholder:"Inserisci la tua password",backupCodesTitle:"Salva i tuoi codici di backup",backupCodesWarning:"Conserva questi codici in un posto sicuro. Ogni codice può essere usato una sola volta.",backupCodesRemaining:"{{count}} codici di backup rimanenti",savedCodes:"Codici salvati",regenBackup:"Rigenera codici di backup",regenBackupHint:"Inserisci il tuo codice TOTP corrente per generare 10 nuovi codici di backup.",newBackupCodes:"Nuovi codici di backup",linkedAccounts:"Account SSO collegati",linkedAccountsDesc:"Questi provider di identità esterni sono collegati al tuo account.",oidcUnlinked:"Account scollegato."},oidc:{title:"Provider SSO / OIDC",desc:"Configura provider OpenID Connect per il single sign-on.",addProvider:"Aggiungi provider",newProvider:"Nuovo provider",empty:"Nessun provider OIDC configurato.",created:"Provider creato.",updated:"Provider aggiornato.",deleted:"Provider eliminato.",refreshIcon:"Aggiorna icona",removeIcon:"Rimuovi icona",iconRefreshed:"Icona aggiornata.",iconRemoved:"Icona rimossa.",iconFetchFailed:"Impossibile recuperare l'icona dall'URL del provider.",deleteTitle:"Elimina provider",deleteMessage:'Eliminare "{{name}}"? Tutti gli account collegati verranno disconnessi.',form:{name:"Nome visualizzato",issuerUrl:"URL emittente",clientId:"ID client",clientSecret:"Client secret",scopes:"Scope",iconUrl:"URL icona (opzionale)",enabled:"Abilitato",autoCreate:"Crea utenti automaticamente",autoCreateDesc:"Crea automaticamente un account locale al primo accesso.",autoLink:"Collega automaticamente gli account esistenti",autoLinkDesc:"Collega gli account locali esistenti tramite email al primo accesso.",secretHint:"lascia vuoto per mantenere",secretPlaceholder:"nuovo segreto",emailClaim:"Claim email",emailClaimDesc:"Claim JWT usato come identità email. Usare 'preferred_username' o 'upn' per Azure Entra ID (che non invia email_verified). Usare solo nomi di claim affidabili.",emailClaimPlaceholder:"e-mail",emailClaimCustomClaimAutoLinkWarning:"I claim personalizzati sono sicuri per il collegamento automatico solo se il valore è gestito dal tenant (es. Azure Entra ID upn / preferred_username). Non abilitare il collegamento automatico se il tuo IdP consente agli utenti di auto-assegnare questo claim.",requireEmailVerified:"Richiedi verifica email",requireEmailVerifiedDesc:"Accetta il claim email solo se il provider lo contrassegna come verificato.",requireEmailVerifiedWarning:"Attenzione: l'email sarà accettata senza verifica. Usare solo con provider affidabili.",requireEmailVerifiedAutoLink:"Disabilitare prima il collegamento automatico per modificare questa impostazione.",defaultGroup:"Gruppo predefinito",defaultGroupDesc:"Gruppo assegnato agli utenti creati automaticamente. Ritorno a Viewers se non impostato.",defaultGroupViewersFallback:"Viewers (predefinito)"}},encryption:{title:"Stato crittografia MFA",enabledFromEnv:"Crittografia a riposo abilitata (chiave dalla variabile d'ambiente MFA_ENCRYPTION_KEY)",enabledFromFile:"Crittografia a riposo abilitata (chiave caricata dalla directory dei dati)",enabledGenerated:"Crittografia a riposo abilitata con chiave auto-generata",notConfigured:"Crittografia a riposo non configurata",notConfiguredDesc:"I segreti TOTP e i client_secrets OIDC sono memorizzati in chiaro. Imposta MFA_ENCRYPTION_KEY o riavvia Bambuddy con una directory dati scrivibile per generarne uno automaticamente.",allEncrypted:"Tutti i segreti MFA sono crittografati a riposo.",legacyRowsLabel:"Righe legacy in chiaro",encryptedRowsLabel:"Righe crittografate",legacyRowsWarning:"Rilevate {{count}} righe legacy in chiaro. Salva di nuovo il provider OIDC o re-iscrivi l'app authenticator dell'utente per migrare allo storage crittografato.",backupHint:"La chiave generata automaticamente è memorizzata in DATA_DIR/.mfa_encryption_key ed è inclusa nei backup locali ZIP. Mantieni sicuri i tuoi backup o imposta MFA_ENCRYPTION_KEY esplicitamente.",decryptionBrokenTitle:"Chiave di crittografia mancante",decryptionBrokenError:"{{count}} record crittografati non possono essere decifrati perché la chiave di crittografia non è più disponibile. Ripristina il precedente MFA_ENCRYPTION_KEY o DATA_DIR/.mfa_encryption_key per recuperare.",migrationErrorWarning:"{{count}} riga/righe legacy non sono state ricifrate all'avvio. Controlla i log del server e riavvia Bambuddy per riprovare."},spoolbuddy:{infoTitle:"Dispositivi SpoolBuddy",infoBody:"I kiosk SpoolBuddy si registrano automaticamente tramite heartbeat. Annulla la registrazione qui se un dispositivo non è più in uso o se un duplicato obsoleto è rimasto dopo un crash del daemon.",duplicatesTitle:"{{count}} dispositivi registrati",duplicatesBody:"Solo il primo dispositivo registrato viene utilizzato dall'interfaccia kiosk. Se uno di questi è un duplicato obsoleto da un crash, annulla la sua registrazione — un dispositivo online si ri-registrerà al prossimo heartbeat.",empty:"Nessun dispositivo SpoolBuddy registrato.",online:"Online",offline:"Offline",unregister:"Annulla registrazione",unregisterSuccess:"Dispositivo deregistrato",unregisterError:"Deregistrazione non riuscita",confirmTitle:"Annullare la registrazione del dispositivo SpoolBuddy?",confirmBody:'Questo rimuoverà "{{hostname}}" ({{deviceId}}) dal database. Se il dispositivo è online, si ri-registrerà al prossimo heartbeat.',ipAddress:"Indirizzo IP",firmware:"Firmware",lastSeen:"Ultimo rilevamento",daemonUptime:"Uptime del daemon",systemUptime:"Uptime sistema",never:"mai",nfc:"NFC",scale:"Bilancia",cpuTemp:"Temp. CPU",cpuLoad:"Carico CPU",memory:"Memoria",disk:"Disco",update:"Aggiorna",updateConfirmTitle:"Aggiornare il daemon Spoolbuddy?",updateConfirmBody:`Avviare un aggiornamento software su "{{hostname}}"? Il daemon si riavvierà al termine dell'aggiornamento.`,restartBrowser:"Riavvia browser",restartBrowserConfirmTitle:"Riavviare il browser del kiosk?",restartBrowserConfirmBody:'Riavviare il browser del kiosk su "{{hostname}}"? Il display si oscurerà brevemente.',restartDaemon:"Riavvia daemon",restartDaemonConfirmTitle:"Riavviare il daemon Spoolbuddy?",restartDaemonConfirmBody:'Riavviare il daemon Spoolbuddy su "{{hostname}}"? Il dispositivo sarà offline per alcuni secondi.',reboot:"Riavvia",rebootConfirmTitle:"Riavviare il dispositivo?",rebootConfirmBody:'Riavviare "{{hostname}}"? Il dispositivo sarà offline per circa un minuto.',shutdown:"Spegni",shutdownConfirmTitle:"Spegnere il dispositivo?",shutdownConfirmBody:'Spegnere "{{hostname}}"? Sarà necessario un accesso fisico per riaccenderlo.',commandConfirm:"Conferma",commandQueued:"Comando in coda",commandError:"Invio comando non riuscito"}},notification:{printStarted:{title:"Stampa avviata",body:"{{printer}}: {{filename}} ha iniziato a stampare"},printCompleted:{title:"Stampa completata",body:"{{printer}}: {{filename}} completata con successo"},printFailed:{title:"Stampa fallita",body:"{{printer}}: {{filename}} fallita"},printStopped:{title:"Stampa interrotta",body:"{{printer}}: {{filename}} interrotta"},printProgress:{title:"Avanzamento stampa",body:"{{printer}}: {{filename}} al {{percent}}% completamento"},printerOffline:{title:"Stampante offline",body:"{{printer}} e offline"},printerError:{title:"Errore stampante",body:"{{printer}} – {{error}}"},filamentLow:{title:"Filamento in esaurimento",body:"{{printer}}: Filamento in esaurimento"},maintenanceDue:{title:"Manutenzione dovuta",body:"{{printer}}: {{items}} richiedono attenzione"}},errors:{generic:"Qualcosa e andato storto",networkError:"Errore di rete. Controlla la connessione.",notFound:"Non trovato",unauthorized:"Non autorizzato",serverError:"Errore server",validationError:"Controlla i dati inseriti",printerConnectionFailed:"Connessione alla stampante fallita",saveFailed:"Salvataggio modifiche fallito",deleteFailed:"Eliminazione fallita",loadFailed:"Caricamento dati fallito"},hmsErrors:{title:"Errori - {{name}}",noErrors:"Nessun errore",viewOnWiki:"Vedi su Bambu Lab Wiki",clearInstructions:"Cancella gli errori sulla stampante per rimuoverli qui.",clearErrors:"Cancella errori",clearSuccess:"Errori HMS cancellati",clearFailed:"Impossibile cancellare gli errori HMS"},mqttDebug:{title:"Log debug MQTT",searchPlaceholder:"Cerca topic o payload...",noMessages:"Nessun messaggio registrato",startLoggingHint:'Clicca "Avvia logging" per iniziare a catturare messaggi MQTT',noMessagesMatch:"Nessun messaggio corrisponde al filtro",adjustFilterHint:"Prova a modificare la ricerca o i filtri",incoming:"In ingresso",outgoing:"In uscita",loggingStopped:"Logging fermato",loggingActive:"Logging attivo - i messaggi si aggiornano automaticamente",startLogging:"Avvia logging",stopLogging:"Ferma logging",clearLog:"Pulisci log",topic:"Argomento",timestamp:"Timestamp",direction:"Direzione",all:"Tutti"},printerFiles:{title:"Gestore file",storageUsed:"Usato:",storageFree:"Libero:",filterPlaceholder:"Filtra file...",deleteButton:"Elimina",deleteFiles:"Elimina {{count}} file",deleteFileConfirm:'Eliminare "{{name}}"? Questa azione non può essere annullata.',deleteFilesConfirm:"Eliminare {{count}} file selezionati? Questa azione non può essere annullata.",noFiles:"Nessun file sulla stampante",loadingFiles:"Caricamento file...",failedToLoad:"Caricamento file fallito",toast:{filesDeleted:"Eliminati {{count}} file",deleteFailed:"Eliminazione fallita: {{error}}"}},confirm:{delete:"Sei sicuro di voler eliminare questo?",unsavedChanges:"Hai modifiche non salvate. Sei sicuro di voler uscire?",clearQueue:"Sei sicuro di voler svuotare la coda?"},login:{title:"Login Bambuddy",subtitle:"Accedi al tuo account",username:"Nome utente",usernamePlaceholder:"Inserisci il nome utente",usernameOrEmail:"Nome utente o email",usernameOrEmailPlaceholder:"Nome utente o @ Email",password:"Password",passwordPlaceholder:"Inserisci la password",signIn:"Accedi",signingIn:"Accesso in corso...",rememberMe:"Ricordami",forgotPassword:"Hai dimenticato la password?",loginSuccess:"Accesso riuscito",loginFailed:"Accesso fallito",enterCredentials:"Inserisci nome utente e password",enterEmail:"Inserisci il tuo indirizzo e-mail",oidcLoginFailed:"Accesso OIDC fallito",oidcErrors:{providerError:"Il provider di identità ha restituito un errore",missingParameters:"Parametri obbligatori mancanti nel callback OIDC",invalidState:"Lo stato OIDC non è valido o è già stato utilizzato",stateExpired:"La sessione OIDC è scaduta — riprovare",providerNotFound:"Provider OIDC non trovato",discoveryFailed:"Impossibile recuperare il documento di discovery OIDC",invalidDiscovery:"Il documento di discovery OIDC non è valido",networkError:"Errore di rete durante lo scambio di token OIDC",badResponse:"Risposta inattesa durante lo scambio di token OIDC",noIdToken:"Il provider OIDC non ha restituito un ID token",validationFailed:"La validazione del token OIDC non è riuscita",nonceMismatch:"Il nonce OIDC non corrisponde — possibile attacco di replay",missingSubClaim:"Il token OIDC è privo del claim sub",noLinkedAccount:"Nessun account locale è collegato a questa identità OIDC",accountInactive:"Il tuo account è inattivo",userResolutionFailed:"Impossibile risolvere il tuo account",internalError:"Si è verificato un errore interno durante il login OIDC",tokenExchangeFailed:"Lo scambio di token OIDC non è riuscito"},forgotPasswordTitle:"Password dimenticata",forgotPasswordMessage:"Se hai dimenticato la password, contatta il tuo amministratore di sistema per reimpostarla.",forgotPasswordEmailMessage:"Inserisci il tuo indirizzo email e ti invieremo una nuova password.",emailAddress:"Indirizzo email",emailPlaceholder:"tua.email@esempio.com",cancel:"Annulla",sending:"Invio...",sendResetEmail:"Invia email di reimpostazione",howToReset:"Come reimpostare la password:",resetStep1:"Contatta il tuo amministratore Bambuddy",resetStep2:"Chiedi di reimpostare la password in Gestione utenti",resetStep3:"Possono impostare una nuova password temporanea",resetStep4:"Accedi con la nuova password e cambiala in Impostazioni",gotIt:"Capito",twoFA:{title:"Autenticazione a due fattori",subtitle:"Il tuo account è protetto da 2FA. Inserisci il codice di verifica qui sotto.",methodAuthenticator:"App di autenticazione",methodEmail:"Codice via e-mail",methodBackup:"Codice di recupero",instructionsTotp:"Apri la tua app di autenticazione e inserisci il codice a 6 cifre per Bambuddy.",instructionsEmail:"Un codice a 6 cifre è stato inviato al tuo indirizzo e-mail. È valido per 10 minuti.",instructionsEmailNotSent:"Clicca il pulsante qui sotto per ricevere un codice di verifica via e-mail.",instructionsBackup:"Inserisci uno dei tuoi codici di recupero a 8 caratteri. Ogni codice può essere utilizzato una sola volta.",sendCodeButton:"Invia codice via e-mail",sendingCode:"Invio in corso...",resendCode:"Invia nuovamente il codice",codeLabel:"Codice di verifica",backupCodeLabel:"Codice di recupero",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"Verifica",verifyingButton:"Verifica in corso...",backToLogin:"← Torna alla pagina di accesso",orContinueWith:"oppure accedi con",signInWith:"Accedi con {{provider}}",enterCode:"Inserisci il codice di verifica",sendCodeFailed:"Invio del codice di verifica non riuscito",invalidCode:"Codice non valido. Riprova."},resetPassword:{title:"Imposta nuova password",subtitle:"Inserisci e conferma la nuova password qui sotto.",newPassword:"Nuova password",newPasswordPlaceholder:"Almeno 8 caratteri",confirmPassword:"Conferma password",confirmPasswordPlaceholder:"Ripeti la nuova password",saving:"Salvataggio…",submit:"Imposta nuova password",backToLogin:"Torna al login",passwordsDoNotMatch:"Le password non coincidono",passwordTooShort:"La password deve avere almeno 8 caratteri",resetFailed:"Reimpostazione non riuscita. Il link potrebbe essere scaduto."}},setup:{title:"Configurazione Bambuddy",subtitle:"Configura autenticazione per la tua istanza Bambuddy",enableAuth:"Abilita autenticazione",adminAccount:"Account admin",adminAccountDesc:"Se esistono già admin, l'autenticazione verrà abilitata usando gli account esistenti. Lascia i campi sotto vuoti per usare gli admin esistenti, oppure inserisci nuove credenziali per creare un nuovo utente admin.",adminUsername:"Nome utente admin",adminPassword:"Password admin",optionalIfAdminExists:"(opzionale se esistono admin)",adminUsernamePlaceholder:"Inserisci nome utente admin (opzionale)",adminPasswordPlaceholder:"Inserisci password admin (opzionale)",confirmPassword:"Conferma password",confirmPasswordPlaceholder:"Conferma password admin",settingUp:"Configurazione...",completeSetup:"Completa configurazione",toast:{authEnabledAdminCreated:"Autenticazione abilitata e utente admin creato",authEnabledExistingAdmins:"Autenticazione abilitata usando admin esistenti",setupCompleted:"Configurazione completata",enterBothCredentials:"Inserisci nome utente e password admin, oppure lascia entrambi vuoti per usare admin esistenti",passwordsDoNotMatch:"Le password non coincidono",passwordTooShort:"La password deve essere di almeno 6 caratteri"}},changePassword:{title:"Cambia password",currentPassword:"Password attuale",currentPasswordPlaceholder:"Inserisci password attuale",newPassword:"Nuova password",newPasswordPlaceholder:"Inserisci nuova password (min 6 caratteri)",confirmPassword:"Conferma nuova password",confirmPasswordPlaceholder:"Conferma nuova password",passwordsDoNotMatch:"Le password non coincidono",passwordTooShort:"La password deve essere di almeno 6 caratteri",changing:"Modifica in corso...",success:"Password cambiata con successo",failed:"Modifica password fallita"},plateAlert:{title:"Stampa in pausa!",message:"Oggetti rilevati sul piatto. La stampa è stata messa automaticamente in pausa. Svuota il piatto e riprendi la stampa.",understand:"Ho capito"},camera:{title:"Vista camera",invalidPrinterId:"ID stampante non valido",live:"Live",snapshot:"Istantanea",restartStream:"Riavvia stream",refreshSnapshot:"Aggiorna snapshot",fullscreen:"Schermo intero",exitFullscreen:"Esci da schermo intero",connectingToCamera:"Connessione alla camera...",capturingSnapshot:"Acquisizione snapshot...",connectionLost:"Connessione persa",connectionFailed:"Connessione camera fallita",reconnecting:"Riconnessione tra {{countdown}}s... (tentativo {{attempt}}/{{max}})",reconnectNow:"Riconnetti ora",cameraUnavailable:"Camera non disponibile",cameraUnavailableDesc:"Assicurati che la stampante sia accesa e connessa.",noCamera:"Nessuna camera disponibile",retry:"Riprova",cameraStream:"Stream camera",zoomOut:"Zoom indietro",zoomIn:"Zoom avanti",resetZoom:"Reimposta zoom",recording:"Registrazione",startRecording:"Avvia registrazione",stopRecording:"Ferma registrazione",chamberLight:"Accendi/Spegni luce camera",unavailable:"Telecamera non disponibile",diagnose:{button:"Diagnostica",modalTitle:"Diagnostica telecamera",running:"Diagnostica in corso...",runFailed:"Impossibile eseguire la diagnostica: {{error}}",retry:"Riesegui",stage:{tcp_reachable:"Raggiungibilità di rete",first_frame:"Acquisizione frame",live_stream_active:"Stream live attivo"},summary:{all_ok:"La telecamera funziona. La diagnostica ha completato tutte le fasi con successo.",live_stream_active_healthy:"La telecamera sta trasmettendo con frame recenti — nessun test necessario.",printer_unreachable:"La stampante non è raggiungibile. Verifica l'indirizzo IP, la connessione di rete e che la stampante sia accesa.",camera_port_closed:"La stampante risponde ma la porta della telecamera è chiusa. Assicurati che la modalità LAN e la modalità sviluppatore siano attive nelle impostazioni della stampante.",no_frame:"Connessione alla telecamera riuscita ma nessun frame ricevuto. Riprova o verifica che la telecamera sia abilitata nelle impostazioni della stampante.",unknown_failure:"Diagnostica della telecamera fallita per motivo sconosciuto. Controlla il log di supporto per i dettagli."},meta:{protocol:"Protocollo",port:"Porta",profile:"Profilo"}}},groups:{title:"Gestione gruppi",subtitle:"Gestisci gruppi permessi per controllo accesso",backToSettings:"Torna a Impostazioni",createGroup:"Crea gruppo",noPermission:"Non hai il permesso di accedere a questa pagina.",system:"Sistema",noDescription:"Nessuna descrizione",usersCount:"{{count}} utenti",permissionsCount:"{{count}} permessi",edit:"Modifica",delete:"Elimina",toast:{created:"Gruppo creato con successo",updated:"Gruppo aggiornato con successo",deleted:"Gruppo eliminato con successo",enterGroupName:"Inserisci un nome gruppo"},modal:{editGroup:"Modifica gruppo",createGroup:"Crea gruppo",cancel:"Annulla",saving:"Salvataggio...",creating:"Creazione...",saveChanges:"Salva modifiche"},form:{groupName:"Nome gruppo",groupNamePlaceholder:"Inserisci nome gruppo",systemGroupWarning:"I nomi dei gruppi di sistema non possono essere modificati",description:"Descrizione",descriptionPlaceholder:"Inserisci descrizione (opzionale)",permissions:"Permessi ({{count}} selezionati)"},deleteModal:{title:"Elimina gruppo",message:"Sei sicuro di voler eliminare questo gruppo? Gli utenti in questo gruppo perderanno questi permessi.",confirm:"Elimina gruppo"},editor:{title:"Modifica gruppo",createTitle:"Crea gruppo",search:"Cerca permessi...",selectAll:"Seleziona tutto",clearAll:"Deseleziona tutto",permissionsSelected:"{{count}} selezionati",noResults:"Nessun permesso corrisponde alla ricerca"}},users:{title:"Gestione utenti",subtitle:"Gestisci utenti e accesso alla tua istanza Bambuddy",backToSettings:"Torna a Impostazioni",createUser:"Crea utente",noPermission:"Non hai il permesso di accedere a questa pagina.",admin:"Amministratore",noGroups:"Nessun gruppo",active:"Attivo",inactive:"Inattivo",edit:"Modifica",delete:"Elimina",system:"Sistema",noGroupsAvailable:"Nessun gruppo disponibile",table:{username:"Nome utente",groups:"Gruppi",status:"Stato",actions:"Azioni"},toast:{created:"Utente creato con successo",updated:"Utente aggiornato con successo",deleted:"Utente eliminato con successo",fillRequired:"Compila tutti i campi obbligatori",passwordsDoNotMatch:"Le password non coincidono",passwordTooShort:"La password deve essere di almeno 6 caratteri",ldapProvisioned:'Utente LDAP "{{username}}" provisionato'},modal:{createUser:"Crea utente",editUser:"Modifica utente",cancel:"Annulla",creating:"Creazione...",saving:"Salvataggio...",saveChanges:"Salva modifiche",advancedAuthSubtitle:"con autenticazione avanzata",tabsAriaLabel:"Origine utente",localTab:"Locale",ldapTab:"LDAP",ldapSearchLabel:"Cerca nella directory",ldapSearchPlaceholder:"Digita un nome utente, nome o e-mail...",ldapMinChars:"Digita almeno 2 caratteri per cercare",ldapTypeToSearch:"Inizia a digitare per cercare nella directory LDAP",ldapSearching:"Ricerca nella directory...",ldapNoResults:"Nessun utente corrispondente nella directory",ldapSearchError:"Ricerca nella directory fallita. Verifica lo stato del server LDAP.",ldapAlreadyProvisioned:"Già provisionato",ldapSelectedLabel:"Selezionato",ldapProvision:"Provisiona utente",ldapProvisioning:"Provisioning...",ldapErrorProvision:"Provisioning fallito. Verifica lo stato del server LDAP e riprova."},form:{username:"Nome utente",usernamePlaceholder:"Inserisci nome utente",email:"E-mail",emailPlaceholder:"utente@esempio.com",password:"Password",passwordPlaceholder:"Inserisci password",confirmPassword:"Conferma password",confirmPasswordPlaceholder:"Conferma password",newPasswordPlaceholder:"Inserisci nuova password",confirmNewPasswordPlaceholder:"Conferma nuova password",leaveBlankToKeep:"lascia vuoto per mantenere attuale",groups:"Gruppi",optional:"opzionale",autoGeneratedPassword:"Una password sicura verrà generata automaticamente e inviata via email all'utente.",passwordManagedByAdvancedAuth:`La password è gestita dall'autenticazione avanzata. Usa "Reimposta password" per inviare una nuova password all'utente via email.`,resetPassword:"Reimposta password",resettingPassword:"Reimpostazione password..."},deleteModal:{title:"Elimina utente",message:"Sei sicuro di voler eliminare questo utente? Questa azione non può essere annullata.",confirm:"Elimina utente"}},streamOverlay:{title:"Overlay stream",invalidPrinterId:"ID stampante non valido",cameraStream:"Stream camera",progress:"Avanzamento",eta:"ETA",printerIdle:"Stampante inattiva",printerOffline:"Stampante offline",status:{printing:"In stampa",paused:"In pausa",finished:"Completata",failed:"Fallita",idle:"Inattiva",unknown:"Sconosciuto"}},profiles:{title:"Profili",subtitle:"Gestisci preset slicer e calibrazioni pressure advance",tabs:{bambuCloud:"Bambu Cloud",orcaCloud:"Orca Cloud",local:"Profili locali",kprofiles:"Profili K"},orcaCloud:{connectedAs:"Connesso come",logout:"Disconnetti",noLogoutPermission:"Non hai il permesso di disconnetterti",noConnectPermission:"Non hai il permesso di connetterti a Orca Cloud",retry:"Riprova",back:"Usa un altro metodo di accesso",connect:{title:"Connetti a Orca Cloud",description:"Accedi al tuo account Orca Cloud per sincronizzare i profili dello slicer in Bambuddy."},providers:{google:"Accedi con Google",apple:"Accedi con Apple",github:"Accedi con GitHub",email:"Accedi con email e password"},password:{title:"Accedi con email e password",email:"Email",emailPlaceholder:"tu@esempio.it",password:"Password",submit:"Accedi"},paste:{title:"Completa l'accesso",step1:"Si è aperta una nuova scheda con la pagina di accesso di Orca Cloud. Accedi con il tuo account Orca.",step2:`Il browser verrà reindirizzato a un URL "localhost" che non riuscirà a caricarsi. È normale — è proprio quell'URL che ci serve.`,step3:"Copia l'intero URL dalla barra degli indirizzi del browser e incollalo qui sotto.",signInUrl:"Se la scheda di accesso non si è aperta, clicca su questo URL:",label:"Incolla qui l'URL di callback",placeholder:"http://localhost:41172/callback?code=...&state=...",submit:"Completa la connessione"},profiles:{title:"I tuoi profili Orca Cloud ({{count}})",refresh:"Aggiorna",empty:"Nessun profilo trovato nel tuo account Orca Cloud."},toast:{connected:"Connesso a Orca Cloud come {{email}}",disconnected:"Disconnesso da Orca Cloud"},errors:{startFailed:"Impossibile avviare l'accesso a Orca Cloud.",finishFailed:"Impossibile completare l'accesso a Orca Cloud.",passwordFailed:"Impossibile accedere con quell'email e password.",passwordEmpty:"Inserisci sia l'email che la password.",emptyPaste:"Incolla l'URL di callback dal tuo browser.",noCode:"Questo URL non sembra un callback di Orca Cloud (manca il parametro code). Copia l'URL completo dalla barra degli indirizzi."}},localProfiles:{title:"Profili locali",subtitle:"Importa e gestisci preset slicer da OrcaSlicer",import:"Importa profili",importDesc:"Trascina file .bbscfg, .bbsflmt, .orca_filament, .zip o .json qui",importing:"Importazione...",search:"Cerca preset locali...",noPresets:"Nessun preset locale ancora",noSearchResults:"Nessun preset corrisponde alla ricerca",badge:"Locale",edit:"Modifica",delete:"Elimina",cancel:"Annulla",deleteConfirmTitle:"Elimina preset",deleteConfirm:"Sei sicuro di voler eliminare questo preset? Questa azione non può essere annullata.",source:"Fonte",inheritsFrom:"Eredita da",filamentType:"Tipo",vendor:"Produttore",compatiblePrinters:"Stampanti",nozzleTemp:"Temp. ugello",cost:"Costo",density:"Densità",pressureAdvance:"Pressure Advance",filament:"Filamento",process:"Processo",printer:"Stampante",toast:{importSuccess:"{{count}} preset importati",importSkipped:"{{count}} preset saltati (duplicati)",importError:"{{count}} errori durante l'importazione",deleted:"Preset eliminato",updated:"Preset aggiornato"}},connectedAs:"Connesso come",logout:"Esci",noLogoutPermission:"Non hai il permesso di disconnetterti",failedToLoad:"Caricamento profili fallito",retry:"Riprova",time:{justNow:"Proprio ora",minsAgo:"{{count}}m fa",hoursAgo:"{{count}}h fa",daysAgo:"{{count}}g fa"},toast:{loggedOut:"Disconnesso"},login:{title:"Connetti a Bambu Cloud",subtitle:"Sincronizza i preset del slicer tra dispositivi",email:"E-mail",password:"Password",region:"Regione",regionGlobal:"Globale",regionChina:"Cina",verificationCode:"Codice di verifica",totpCode:"Codice autenticatore",checkEmail:"Controlla la tua email ({{email}}) per un codice a 6 cifre",enterTotpHint:"Inserisci il codice a 6 cifre dalla tua app autenticatore",accessToken:"Token di accesso",accessTokenHint:"Incolla il tuo access token Bambu Cloud. Gli account della regione Cina devono usare questa via (vincolati al numero di telefono — login via e-mail non disponibile). Il wiki spiega come recuperare il token dai cookie di MakerWorld.",back:"Indietro",loginButton:"Accedi",verifyButton:"Verifica",setTokenButton:"Imposta token",useToken:"Usa access token invece",useEmail:"Accedi con email invece",toast:{loggedIn:"Accesso riuscito",codeSent:"Codice di verifica inviato via email",enterTotp:"Inserisci il codice dalla tua app autenticatore",tokenSet:"Token impostato con successo"}},presets:{myPreset:"Il mio preset (modificabile)",duplicate:"Duplica",editable:"Modificabile",failedToLoadDetails:"Caricamento dettagli preset fallito",deleteConfirm:"Eliminare questo preset?",deleteWarning:'Questo eliminerà definitivamente "{{name}}" da Bambu Cloud. Questa azione non può essere annullata.',noDuplicatePermission:"Non hai il permesso di duplicare preset",noEditPermission:"Non hai il permesso di modificare preset",noDeletePermission:"Non hai il permesso di eliminare preset",types:{filament:"Preset filamento",printer:"Preset stampante",process:"Preset processo"},toast:{deleted:"Preset eliminato",created:"Preset creato",updated:"Preset aggiornato",duplicated:"Preset duplicato",fieldAdded:'Campo "{{key}}" aggiunto',exported:"Preset esportato"},baseLabel:"Base: {{name}}",currentLabel:"Corrente: {{name}}",newPreset:"Nuovo preset",editPreset:"Modifica preset",duplicatePreset:"Duplica preset",createNewPreset:"Crea nuovo preset",customizeSettings:"Personalizza le impostazioni per il nuovo preset",compareWithBase:"Confronta con base",compare:"Confronta",basePreset:"Preset base",selectBasePreset:"Seleziona preset base...",presetName:"Nome preset",myCustomPreset:"Il mio preset personalizzato",inheritsFrom:"Deriva da",dropJsonToImport:"Rilascia JSON per importare",tabs:{common:"Comune",allFields:"Tutti i campi"},availableFields:"Campi disponibili",searchFieldsPlaceholder:"Cerca campi...",noMatchingFields:"Nessun campo corrispondente",allFieldsAdded:"Tutti i campi aggiunti",addCustomField:"Aggiungi campo personalizzato",yourOverrides:"Le tue override",noOverridesYet:"Nessun override ancora",clickFieldsToAdd:"Clicca i campi a sinistra per aggiungerli",saveAsTemplate:"Salva come template",jsonTip:"Suggerimento: trascina e rilascia un file .json ovunque in questa modale per importare impostazioni"},cloudView:{searchPlaceholder:"Cerca preset...",templates:"Template",refresh:"Aggiorna",newPreset:"Nuovo preset",clearFilters:"Pulisci filtri",compareMode:"Modalita confronto",selectAnotherPreset:"Seleziona un altro preset {{type}}",clickTwoPresets:"Clicca due preset dello stesso tipo per confrontare",selectFirst:"1. Seleziona il primo",selectSecond:"2. Seleziona il secondo",compareNow:"Confronta ora",lastSynced:"Ultima sincronizzazione:",showingCount:"Mostrati {{showing}} di {{total}} preset",noPresetsFound:"Nessun preset trovato",columns:{filament:"Filamento",process:"Processo",printer:"Stampante"},noFilamentPresets:"Nessun preset filamento",noProcessPresets:"Nessun preset processo",noPrinterPresets:"Nessun preset stampante",filters:{type:"Tipo",owner:"Proprietario",printer:"Stampante",nozzle:"Ugello",filament:"Filamento",layer:"Layer",all:"Tutti",myPresets:"I miei preset",builtIn:"Integrati",process:"Processo"},noTemplatesPermission:"Non hai il permesso di gestire i template",noRefreshPermission:"Non hai il permesso di aggiornare i profili",noCreatePermission:"Non hai il permesso di creare preset"},templates:{title:"Template rapidi",noTemplates:"Nessun template ancora",createFirst:"Crea template dall'editor preset",typeFilter:"Tipo:",deleteTitle:"Elimina template",deleteWarning:"Questa azione non può essere annullata",deleteConfirm:'Sei sicuro di voler eliminare "{{name}}"?',namePlaceholder:"Nome template",descriptionPlaceholder:"Descrizione",settingsJson:"Impostazioni (JSON)",fieldsCount:"{{count}} campi",shownInModals:"Mostrati nelle modali",hiddenInModals:"Nascosti nelle modali",apply:"Applica",toast:{deleted:"Template eliminato",updated:"Template aggiornato",created:"Template creato",applied:"Template applicato"}}},support:{debugLoggingActive:"Log debug attivo",manageLogs:"Gestisci",collectItem7:"Connettività stampante e versioni firmware",collectItem8:"Stato integrazioni (Spoolman, MQTT, HA)",collectItem9:"Interfacce di rete (solo subnet)",collectItem10:"Versioni dei pacchetti Python",collectItem11:"Controlli di integrità del database",collectItem12:"Dettagli dell'ambiente Docker",bundleGenerating:"Generazione del pacchetto...",bundleStepConnection:"Controlli di connettività delle stampanti in corso",bundleStepVirtualPrinters:"Controlli di configurazione delle stampanti virtuali in corso",bundleStepLogScan:"Analisi dei log recenti per problemi noti",bundleStepBuild:"Creazione dello ZIP del pacchetto di supporto"},fileManager:{title:"Gestore file",subtitle:"Organizza e gestisci i tuoi file di stampa",uploadFiles:"Carica file",newFolder:"Nuova cartella",folderName:"Nome cartella",folderNamePlaceholder:"es., Parti funzionali",renameFile:"Rinomina file",renameFolder:"Rinomina cartella",invalidFilenameChar:'Il carattere "{{char}}" non è consentito nei nomi dei file di stampa. La scheda SD della stampante rifiuta: < > : " / \\ | ? *',moveFiles:"Sposta {{count}} file",rootNoFolder:"Root (nessuna cartella)",current:"corrente",linkFolder:"Collega cartella",linkFolderDescription:'Collega "{{name}}" a un progetto o archivio per accesso rapido.',project:"Progetto",archive:"Archivio",noProjectsFound:"Nessun progetto trovato",noArchivesFound:"Nessun archivio trovato",unlink:"Scollega",link:"Collega",dragDropFiles:"Trascina e rilascia file qui",dropFilesHere:"Rilascia file qui",orClickToBrowse:"oppure clicca per sfogliare",allFileTypesSupported:"Tutti i tipi di file supportati. I file ZIP saranno estratti.",zipFilesDetected:"File ZIP rilevati",zipExtractOptions:"I file ZIP saranno estratti. Scegli come gestire la struttura cartelle:",preserveZipStructure:"Mantieni struttura cartelle dal ZIP",createFolderFromZip:"Crea cartella dal nome ZIP",stlThumbnailGeneration:"Generazione miniature STL",zipMayContainStl:"I file ZIP possono contenere STL. Le miniature possono essere generate durante l'estrazione.",thumbnailsCanBeGenerated:"Le miniature possono essere generate per file STL. I modelli grandi possono richiedere più tempo.",generateThumbnailsForStl:"Genera miniature per file STL",threemfDetected:"File 3MF rilevati",threemfExtractionInfo:"Modello stampante, materiale, colore e impostazioni stampa saranno estratti automaticamente dai file 3MF.",willBeExtracted:"Sara estratto",filesExtracted:"{{count}} file estratti",uploadComplete:"Caricamento completato: {{succeeded}} riusciti",uploadFailed:"Caricamento fallito",zipFilesFailed:"{{count}} file falliti",uploading:"Caricamento...",changeLink:"Cambia collegamento...",linkTo:"Collega a...",linkToProjectOrArchive:"Collega a progetto o archivio",addToQueue:"Aggiungi alla coda",schedulePrint:"Pianifica",generateThumbnail:"Genera miniatura",generateThumbnails:"Genera miniature",generateThumbnailsForMissing:"Genera miniature per STL senza miniatura",gridView:"Vista griglia",listView:"Vista elenco",lowDiskSpaceWarning:"Avviso spazio disco basso",lowDiskSpaceDetails:"Solo {{free}} liberi su {{total}} totali. La soglia e {{threshold}} GB nelle impostazioni.",files:"File",folders:"Cartelle",size:"Dimensione",free:"Libero",allFiles:"Tutti i file",allExternal:"Esterni",externalIsEmpty:"Nessun file esterno",externalEmptyDescription:"I file delle tue cartelle esterne collegate appariranno qui.",wrap:"A capo",enableTextWrapping:"Abilita a capo testo",disableTextWrapping:"Disabilita a capo testo",collapse:"Comprimi",collapseFoldersByDefault:"Comprimi le cartelle per impostazione predefinita",expandFoldersByDefault:"Espandi le cartelle per impostazione predefinita",dragToResizeTooltip:"Trascina per ridimensionare, doppio clic per reset",searchFiles:"Cerca file...",allTypes:"Tutti i tipi",prints:"Stampe",ascending:"Crescente",descending:"Decrescente",resultsCount:"{{showing}} di {{total}} file",selectAll:"Seleziona tutto",deselectAll:"Deseleziona tutto",selected:"{{count}} selezionati",adding:"Aggiunta...",loadingFiles:"Caricamento file...",folderIsEmpty:"La cartella e vuota",noFilesYet:"Nessun file ancora",folderEmptyDescription:"Carica file o sposta file in questa cartella per iniziare.",noFilesDescription:"Carica file per iniziare a organizzare i file di stampa.",noMatchingFiles:"Nessun file corrispondente",noMatchingFilesDescription:"Nessun file corrisponde ai criteri di ricerca o filtro.",clearFilters:"Pulisci filtri",printedCount:"Stampato {{count}}x",uploadedBy:"Caricato da",deleteFolder:"Elimina cartella",deleteFile:"Elimina file",deleteFilesCount:"Elimina {{count}} file",deleteFolderConfirm:"Sei sicuro di voler eliminare questa cartella? Tutti i file dentro saranno eliminati.",deleteFileConfirm:"Sei sicuro di voler eliminare questo file?",deleteFilesConfirm:"Sei sicuro di voler eliminare {{count}} file selezionati? Questa azione non può essere annullata.",deleting:"Eliminazione...",noPermissionRenameFolder:"Non hai il permesso di rinominare cartelle",noPermissionLinkFolder:"Non hai il permesso di collegare cartelle",noPermissionDeleteFolder:"Non hai il permesso di eliminare cartelle",noPermissionPrint:"Non hai il permesso di stampare",noPermissionSlice:"Non hai il permesso di sezionare i file",noPermissionAddToQueue:"Non hai il permesso di aggiungere alla coda",noPermissionDownload:"Non hai il permesso di scaricare file",noPermissionRenameFile:"Non hai il permesso di rinominare questo file",noPermissionGenerateThumbnail:"Non hai il permesso di generare miniature",noPermissionDeleteFile:"Non hai il permesso di eliminare questo file",noPermissionCreateFolder:"Non hai il permesso di creare cartelle",noPermissionUpload:"Non hai il permesso di caricare file",noPermissionMoveFiles:"Non hai il permesso di spostare file",noPermissionDeleteFiles:"Non hai il permesso di eliminare file",linkExternal:"Collega esterno",linkExternalFolder:"Collega cartella esterna",linkExternalFolderDescription:"Monta una directory host (NAS, USB, condivisione di rete) nel File Manager. I file non vengono copiati — vengono letti direttamente dal percorso originale.",externalFolderNamePlaceholder:"es. Stampe NAS",externalPath:"Percorso host",externalPathHelp:"Percorso assoluto della directory sull'host Docker. Deve essere montato come bind nel container.",readOnly:"Sola lettura",readOnlyHelp:"impedisce caricamenti e cancellazioni",showHiddenFiles:"Mostra file nascosti (file punto)",externalFolder:"Cartella esterna",scanFolder:"Scansiona",toast:{folderCreated:"Cartella creata",folderDeleted:"Cartella eliminata",fileDeleted:"File eliminato",filesDeleted:"Eliminati {{count}} file",filesMoved:"File spostati",folderLinked:"Cartella collegata",folderUnlinked:"Cartella scollegata",externalFolderLinked:"Cartella esterna collegata e scansionata",folderScanned:"Scansione completata: {{added}} aggiunti, {{removed}} rimossi",addedToQueue:"Aggiunti {{count}} file alla coda",addedToQueuePartial:"Aggiunti {{added}} file, {{failed}} falliti",failedToAddToQueue:"Aggiunta file fallita: {{error}}",fileRenamed:"File rinominato",folderRenamed:"Cartella rinominata",thumbnailsGenerated:"Generate {{count}} miniature",thumbnailsGeneratedPartial:"Generate {{succeeded}} miniature, {{failed}} fallite",noStlMissingThumbnails:"Nessun file STL senza miniature",failedToGenerateThumbnails:"Generazione miniature fallita: {{error}}",thumbnailGenerated:"Miniatura generata",failedToGenerateThumbnail:"Generazione miniatura fallita: {{error}}"}},projects:{title:"Progetti",subtitle:"Organizza e traccia i tuoi progetti di stampa 3D",newProject:"Nuovo progetto",editProject:"Modifica progetto",deleteProject:"Elimina progetto",projectName:"Nome progetto",description:"Descrizione",noProjects:"Nessun progetto ancora",noProjectsFiltered:"Nessun progetto {{status}}",noProjectsFilteredHelp:"Non hai progetti {{status}}. I progetti appariranno qui quando il loro stato cambia.",createFirst:"Crea il tuo primo progetto per organizzare stampe correlate, tracciare progressi e gestire i tuoi build.",createFirstButton:"Crea il tuo primo progetto",create:"Crea",files:"File",prints:"Stampe",plates:"piatti",parts:"parti",lastModified:"Ultima modifica",deleteConfirm:"Sei sicuro di voler eliminare questo progetto? Archivi e elementi in coda saranno scollegati ma non eliminati.",addFiles:"Aggiungi file",removeFile:"Rimuovi file",viewDetails:"Vedi dettagli",namePlaceholder:"es., Build Voron 2.4",descriptionPlaceholder:"Descrizione opzionale...",urlLabel:"URL",urlPlaceholder:"https://makerworld.com/...",urlInvalid:"L'URL deve iniziare con http:// o https://",openExternalUrl:"Apri URL del progetto",coverImageLabel:"Immagine di copertina",coverImageAlt:"Immagine di copertina del progetto",coverImageUpload:"Carica",coverImageReplace:"Sostituisci",coverImageRemove:"Rimuovi",color:"Colore",targetPlates:"Piatti target",targetPlatesPlaceholder:"es., 25",targetPlatesHelp:"Numero di job di stampa",targetParts:"Parti target",targetPartsPlaceholder:"es., 150",targetPartsHelp:"Totale oggetti necessari",tagsLabel:"Tag (separati da virgola)",tagsPlaceholder:"es., voron, funzionale, regalo",dueDate:"Data scadenza",priority:"Priorita",priorityLow:"Bassa",priorityNormal:"Normale",priorityHigh:"Alta",priorityUrgent:"Urgente",statusActive:"Attivo",statusCompleted:"Completato",statusArchived:"Archiviato",done:"Fatto",completed:"completato",failed:"fallito",inQueue:"in coda",noPrintsYet:"Nessuna stampa ancora",printJobs:"Job di stampa (piatti)",partsPrinted:"Parti stampate",failedParts:"Parti fallite",import:"Importa",export:"Esporta",importProject:"Importa progetto",exportAll:"Esporta tutti i progetti",loading:"Caricamento progetti...",noEditPermission:"Non hai il permesso di modificare progetti",noDeletePermission:"Non hai il permesso di eliminare progetti",noCreatePermission:"Non hai il permesso di creare progetti",noImportPermission:"Non hai il permesso di importare progetti",noExportPermission:"Non hai il permesso di esportare progetti",toast:{created:"Progetto creato",updated:"Progetto aggiornato",deleted:"Progetto eliminato",imported:"Progetto importato",multipleImported:"{{count}} progetti importati",importFailed:"Import fallito",exported:"Progetti esportati (solo metadati)"}},projectDetail:{notFound:"Progetto non trovato",backToProjects:"Torna a Progetti",export:"Esporta",exportProject:"Esporta progetto",noExportPermission:"Non hai il permesso di esportare progetti",noEditPermission:"Non hai il permesso di modificare progetti",partOf:"Parte di:",priorityLabel:"Priorita:",noPrints:"Nessuna stampa in questo progetto ancora",status:{active:"Attivo",completed:"Completato",archived:"Archiviato"},priority:{low:"Bassa",normal:"Normale",high:"Alta",urgent:"Urgente"},dueDate:{overdue:"Scaduto",today:"Scade oggi",daysLeft:"{{count}} giorni rimanenti"},progress:{platesProgress:"Avanzamento piatti",partsProgress:"Avanzamento parti",printJobs:"job di stampa",parts:"parti",percentComplete:"{{percent}}% completato",remaining:"{{count}} rimanenti"},stats:{printJobs:"Job di stampa",total:"totale",failed:"{{count}} falliti",partsPrinted:"{{count}} parti stampate",printTime:"Tempo di stampa",filamentUsed:"Filamento usato"},cost:{title:"Tracciamento costi",filamentCost:"Costo filamento",energy:"Energia",totalCost:"Costo totale",total:"Totale",includesBom:"incl. distinta materiali",budget:"Budget",remaining:"Rimanente"},subProjects:{title:"Sotto-progetti ({{count}})"},notes:{title:"Note",noEditPermission:"Non hai il permesso di modificare le note",placeholder:"Aggiungi note su questo progetto...",empty:"Nessuna nota ancora. Clicca Modifica per aggiungere note."},files:{title:"File",linkFolders:"Collega cartelle dal Gestore file",forQuickAccess:"a questo progetto per accesso rapido.",fileCount:"{{count}} file",empty:"Nessuna cartella collegata. Vai a Gestore file e collega una cartella a questo progetto.",noFiles:"Nessun file in questa cartella.",print:"Stampa ora",addToQueue:"Aggiungi alla coda"},bom:{title:"Distinta materiali",acquired:"{{completed}}/{{total}} acquisiti",showAll:"Mostra tutti",hideDone:"Nascondi completati",addPart:"Aggiungi parte",noAddPermission:"Non hai il permesso di aggiungere parti",partNamePlaceholder:"Nome parte (es., viti M3x8)",partName:"Nome parte",qty:"Qta",price:"Prezzo ({{currency}})",sourcingUrlPlaceholder:"URL fornitura (opzionale)",remarksPlaceholder:"Note (opzionale)",deletePart:"Elimina parte",deleteConfirm:'Sei sicuro di voler eliminare "{{name}}"?',noUpdatePermission:"Non hai il permesso di aggiornare parti",noEditPermission:"Non hai il permesso di modificare parti",noDeletePermission:"Non hai il permesso di eliminare parti",totalCost:"Costo totale:",empty:"Nessuna parte nella distinta materiali. Aggiungi hardware, elettronica o altri componenti da reperire."},timeline:{title:"Timeline attivita",empty:"Nessuna attivita ancora."},template:{saveAsTemplate:"Salva come template",noCreatePermission:"Non hai il permesso di creare template"},queue:{title:"Coda",viewAll:"Vedi tutto",printing:"{{count}} in stampa",queued:"{{count}} in coda"},prints:{title:"Stampe ({{count}})"},toast:{projectUpdated:"Progetto aggiornato",partAdded:"Parte aggiunta",partRemoved:"Parte rimossa",exportFailed:"Export fallito",projectExported:"Progetto esportato",templateCreated:"Template creato"}},system:{title:"Informazioni sistema",version:"Versione",uptime:"Tempo attivo",cpuUsage:"Uso CPU",memoryUsage:"Uso memoria",diskUsage:"Uso disco",networkInfo:"Info rete",logs:"Log",debugMode:"Modalita debug",enableDebug:"Abilita log debug",disableDebug:"Disabilita log debug",downloadLogs:"Scarica log",clearLogs:"Cancella log",dockerInfo:"Info Docker",containerName:"Nome container",imageName:"Nome immagine",platform:"Piattaforma",architecture:"Architettura"},library:{title:"Libreria filamenti",addFilament:"Aggiungi filamento",editFilament:"Modifica filamento",deleteFilament:"Elimina filamento",vendor:"Produttore",material:"Materiale",color:"Colore",kFactor:"Fattore K",temperature:"Temperatura",noFilaments:"Nessun filamento in libreria",deleteConfirm:"Sei sicuro di voler eliminare questo filamento?",importFromPrinter:"Importa da stampante",exportToFile:"Esporta su file"},slice:{title:"Slicing modello",action:"Slice",actionAll:"Slicia tutti i {{count}} piatti",actionAllTitle:"Slicia tutti i piatti in un unico output multi-piatto (un solo archivio). La selezione del filamento copre ogni slot definito dal progetto.",allPlatesToggle:"Slicia tutti i {{count}} piatti",slicing:"Slicing…",printer:"Profilo stampante",process:"Profilo processo",filament:"Profilo filamento",filamentSlot:"Filamento {{index}} ({{type}})",selectPreset:"— Seleziona un preset —",loadingPresets:"Caricamento preset…",analyzingPlateFilaments:"Analisi filamenti del piano…",analyzingPlateFilamentsHint:"Slicing di anteprima per scoprire quali slot AMS usa questo piano. In cache dopo — la riapertura è istantanea.",previewToast:"Analisi di {{name}} – {{elapsed}}",previewWithProgress:"Analisi di {{name}} – {{stage}} ({{percent}}%) – {{elapsed}}",notUsedByPlate:"— non usato da questo piano",noPresetsForSlot:"Nessun preset disponibile",otherPrinters:"Altre stampanti",presetsLoadFailed:"Caricamento preset fallito. Apri Impostazioni → Profili per importarli prima.",refreshPresets:"Aggiorna",refreshPresetsTitle:"Aggiorna i preset — recupera gli elenchi più recenti dal cloud e dai bundle (da usare dopo aver eliminato un preset in Bambu Studio o Bambu Handy)",allPresetsRequired:"Tutti i preset devono essere selezionati",bundle:"Bundle slicer",bundleNone:"— Nessuno (scegli i preset singolarmente) —",bundleAllRequired:"Devi scegliere il processo del bundle e ogni slot filamento",enqueuing:"Invio lavoro di slicing…",queued:"In coda…",failed:"Slicing fallito. Controlla i log del sidecar.",startedToast:"Slicing di {{name}} in background…",queuedToast:"In coda: {{name}} – {{elapsed}}",runningToast:"Slicing {{name}} – {{elapsed}}",runningWithProgress:"{{name}} – {{stage}} ({{percent}}%) – {{elapsed}}",runningWithProgressMultiPlate:"Piatto {{plateIndex}} di {{plateCount}} • {{name}} – {{stage}} ({{percent}}%) – {{elapsed}}",completedToast:"{{name}} sezionato",failedTitle:"Slicing fallito",failedToast:"Slicing di {{name}} fallito: {{detail}}",tier:{local:"Importato",cloud:"Bambu Cloud",orcaCloud:"Orca Cloud",standard:"Standard"},cloud:{notAuthenticated:"Accedi a Bambu Cloud (Impostazioni → Profili → Bambu Cloud) per vedere i preset cloud.",expired:"Sessione Bambu Cloud scaduta – accedi di nuovo per aggiornare i preset cloud.",unreachable:"Bambu Cloud non è raggiungibile. I preset locali e standard funzionano ancora."},orcaCloud:{notAuthenticated:"Accedi a Orca Cloud (Profili → Orca Cloud) per vedere i tuoi preset Orca.",expired:"Sessione Orca Cloud scaduta — accedi di nuovo per aggiornare i tuoi preset Orca.",unreachable:"Orca Cloud non è raggiungibile in questo momento. Gli altri preset continuano a funzionare."},bedType:{label:"Piano di stampa",auto:"Auto (usa preset di processo)",coolPlate:"Cool Plate",coolPlateSuperTack:"Cool Plate SuperTack",engineering:"Engineering Plate",highTemp:"High Temp Plate",texturedPEI:"Textured PEI Plate",smoothPEI:"Smooth PEI Plate"}},spoolman:{title:"Integrazione Spoolman",enabled:"Spoolman abilitato",url:"URL Spoolman",connected:"Connesso",disconnected:"Non connesso",testConnection:"Testa connessione",sync:"Sincronizza",syncing:"Sincronizzazione...",lastSync:"Ultima sincronizzazione",linkToSpoolman:"Collega a Spoolman",openInSpoolman:"Apri in Spoolman",unlinkSpool:"Scollega bobina",unlinkConfirmTitle:"Rimuovere bobina?",unlinkConfirmMessage:"Questo rimuoverà la bobina da questo slot. I dati della bobina stessa rimarranno invariati.",selectSpool:"Seleziona bobina",noUnlinkedSpools:"Nessuna bobina disponibile",linkSuccess:"Bobina assegnata con successo",linkFailed:"Impossibile assegnare la bobina",unlinkSuccess:"Bobina rimossa con successo",unlinkFailed:"Impossibile rimuovere la bobina",linkedSpool:"Bobina assegnata",spoolId:"ID bobina",fillSourceLabel:"(Spoolman)",weight:"Peso",remaining:"Rimanente",disableWeightSync:"Disabilita sync peso stimato AMS",disableWeightSyncDesc:"Non aggiornare la capacità rimanente dalle stime AMS. Usalo se preferisci il tracciamento di Spoolman rispetto alle stime AMS. Le nuove bobine useranno comunque la stima AMS come peso iniziale.",reportPartialUsage:"Segnala uso parziale per stampe fallite",reportPartialUsageDesc:"Quando una stampa fallisce o viene annullata, segnala il filamento stimato usato fino a quel punto in base all'avanzamento layer."},inventory:{title:"Inventario Bobine",subtitle:"Gestisci le tue bobine",spoolmanMixedContentTitle:"Spoolman non può essere caricato tramite HTTPS — contenuto misto bloccato dal browser",spoolmanMixedContentBody:"Bambuddy viene servito tramite HTTPS (dietro il tuo reverse proxy), ma l'URL di Spoolman è ancora HTTP. I browser bloccano il contenuto misto per motivi di sicurezza, quindi l'interfaccia Spoolman incorporata non può essere visualizzata. Anche Spoolman deve essere raggiungibile via HTTPS.",spoolmanMixedContentFixReverseProxy:"Metti Spoolman dietro lo stesso reverse proxy di Bambuddy (Traefik / Nginx / Caddy) in HTTPS, poi aggiorna l'URL di Spoolman nelle Impostazioni con il nuovo indirizzo HTTPS.",spoolmanMixedContentFixOpenNewTab:"Come alternativa, apri Spoolman in una nuova scheda via HTTP — le regole sul contenuto misto si applicano solo ai frame incorporati, una scheda autonoma funziona.",spoolmanOpenInNewTab:"Apri Spoolman in una nuova scheda",labels:{title:"Stampa etichette bobine",selectedCount:"{{count}} selezionato",pickSpools:"Scegli per quali bobine stampare le etichette:",searchPlaceholder:"Cerca per nome, marca o #ID",filterByMaterial:"Materiale:",allMaterials:"Tutto",selectVisible:"Seleziona tutti visibili ({{count}})",deselectVisible:"Deseleziona visibili",clearAll:"Cancella tutto",noSpoolsToShow:"Nessuna bobina da mostrare. Modifica il filtro e riprova.",noMatches:"Nessuna bobina corrisponde alla ricerca o al filtro corrente.",printOne:"Stampa etichetta per questa bobina",printLabels:"Stampa etichette…",bulkTitle:"Scegli le bobine da etichettare tra le {{count}} mostrate",noSpoolsTitle:"Nessuna bobina da etichettare",error:"Impossibile generare etichette: {{msg}}",sortBy:{label:"Ordina:",id:"Per ID",color:"Per colore"},templates:{amsHolderSmall:{label:"Supporto AMS — piccolo (74 × 33 mm)",hint:"Un'etichetta per pagina; corrisponde all'etichetta stampabile del modello MakerWorld 752566 (Porta-etichette filamento AMS)."},amsHolderLarge:{label:"Supporto AMS — grande (75 × 55 mm)",hint:"Un'etichetta per pagina; si adatta alla variante cartoncino del porta-etichette filamento AMS. Spazio sufficiente per campione colore, marca, materiale, ID e codice QR."},box40x30:{label:"Etichetta scatola (40 × 30 mm)",hint:"Una etichetta per pagina; misura comune DK/Brother, ideale per etichette di sacchetti filamento e contenitori."},box:{label:"Box label (62 × 29 mm)",hint:"Una etichetta per pagina; dimensionata per Brother PT/QL e piccole etichette Dymo."},averyL7160:{label:"Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)",hint:"Foglio formato UE; 21 etichette per pagina A4."},avery5160:{label:"Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)",hint:"Foglio formato US; 30 etichette per pagina Letter."}}},addSpool:"Aggiungi Bobina",editSpool:"Modifica Bobina",copySpool:"Copia Bobina",material:"Materiale",selectMaterial:"Seleziona materiale...",subtype:"Sottotipo",brand:"Marchio",searchBrand:"Cerca marchio...",useCustomBrand:'Usa "{{brand}}"',useCustomMaterial:"Usa materiale personalizzato: {{material}}",colorName:"Nome Colore",colorNamePlaceholder:"Bianco Giada, Rosso Fuoco...",color:"Colore",hexColor:"Colore Hex",pickColor:"Scegli colore personalizzato",labelWeight:"Peso da Etichetta",coreWeight:"Peso Bobina Vuota",searchSpoolWeight:"Cerca peso bobina...",weightUsed:"Utilizzato",currentWeight:"Peso Rimanente",measuredWeight:"Peso Misurato",spoolName:"Bobina",costPerKg:"Costo per kg",storageLocation:"Posizione di archiviazione",storageLocationPlaceholder:"es. Scaffale A, Cassetto 1",openInInventory:"Apri nell'inventario",measuredWeightError:"Il peso misurato deve essere compreso tra {{min}}g e {{max}}g.",slicerFilament:"Filamento Slicer",slicerFilamentName:"Nome Preset Slicer",slicerPreset:"Preset Slicer",searchPresets:"Cerca preset filamento...",selectedPreset:"Selezionato",noPresetsFound:"Nessun preset trovato",tempOverrides:"Override Temperatura",note:"Nota",notePlaceholder:"Eventuali note aggiuntive su questa bobina...",category:"Categoria",categoryPlaceholder:"es. Produzione, Prototipo, Cliente A",categoryNone:"Senza categoria",storageLocationNone:"Nessuna posizione impostata",lowStockThresholdOverride:"Soglia scorte basse (questa bobina)",lowStockThresholdOverrideHelp:"Lascia vuoto per usare la soglia globale ({{global}}%).",clearRfid:"Cancella tag RFID",rfidCleared:"Tag RFID cancellato",archive:"Archivia",restore:"Ripristina",noSpools:"Ancora nessuna bobina. Aggiungi la tua prima bobina per iniziare.",noAvailableSpools:"Nessuna bobina disponibile. Aggiungi una bobina al tuo inventario o rimuovine l'assegnazione da un altro slot.",kProfiles:"Profili K",addKProfile:"Aggiungi K-Profile",assignSpool:"Assegna Bobina",unassignSpool:"Scollega",assignSuccess:"Bobina assegnata e slot AMS configurato",assignFailed:"Assegnazione bobina fallita",selectSpool:"Seleziona una bobina da assegnare a questo slot",assigned:"Assegnato",assigning:"Assegnazione...",searchSpools:"Cerca bobine...",showAllSpools:"Mostra tutte le bobine",spoolmanSpools:"Bobine Spoolman",allMaterials:"Tutti i Materiali",filterByBrand:"Filtra per marchio...",showArchived:"Mostra archiviate",quickAdd:"Aggiunta rapida (Scorta)",quantity:"Quantità",stock:"Scorta",configured:"Configurata",spoolsCreated:"{{count}} bobine create",spoolsPartiallyCreated:"{{created}} di {{total}} bobine create (alcune non riuscite)",spoolCreated:"Bobina creata",spoolUpdated:"Bobina aggiornata",spoolDeleted:"Bobina eliminata",deepLinkSpoolNotFound:"Bobina non trovata",deepLinkFetchFailed:"Impossibile caricare la bobina — riprova",spoolArchived:"Bobina archiviata",spoolRestored:"Bobina ripristinata",kProfileSaveFailed:"Impossibile salvare le impostazioni del profilo K",syncWeightSpoolNotFound:"Bobina non trovata — potrebbe essere stata eliminata",syncWeightSpoolmanUnreachable:"Spoolman non è raggiungibile — riprovare più tardi",syncWeightFailed:"Sincronizzazione del peso non riuscita",spoolmanUnreachable:"Spoolman non è raggiungibile — riprovare più tardi",deleteSpoolNotFound:"Bobina non trovata — potrebbe essere già stata eliminata",deleteFailed:"Impossibile eliminare la bobina",archiveSpoolNotFound:"Bobina non trovata — potrebbe essere già stata eliminata",archiveFailed:"Impossibile archiviare la bobina",restoreSpoolNotFound:"Bobina non trovata — potrebbe essere già stata eliminata",restoreFailed:"Impossibile ripristinare la bobina",saveFailed:"Impossibile salvare le modifiche",tagClearFailed:"Impossibile cancellare il tag",deleteConfirm:"Sei sicuro di voler eliminare questa bobina? Questa azione non può essere annullata.",archiveConfirm:"Sei sicuro di voler archiviare questa bobina?",advancedSettings:"Impostazioni Avanzate",filamentInfoTab:"Info filamento",paProfileTab:"Profilo PA",filamentInfo:"Filamento",additional:"Aggiuntivo",loadingPresets:"Caricamento preset cloud...",cloudConnected:"Cloud connesso",cloudNotConnected:"Cloud non connesso (valori predefiniti)",recentColors:"Recenti",searchColors:"Cerca colori...",searchResults:"Risultati della ricerca",allColors:"Tutti i colori",commonColors:"Colori comuni",showLess:"Mostra meno",showAll:"Mostra tutto",noColorsFound:"Nessun colore corrisponde alla ricerca",noResults:"Nessun risultato trovato",extraColorsLabel:"Colori extra",extraColorsPlaceholder:"EC984C,#6CD4BC,A66EB9,D87694",extraColorsHint:"Incolla da 2 a 8 stop hex, separati da virgole. Visualizzato come sfumatura.",extraColorsInvalid:"Hex non validi ignorati: {{tokens}}",colorEffectLabel:"Effetto",colorEffect:{none:"Nessuno",sparkle:"Scintillante",wood:"Legno",marble:"Marmo",glow:"Bagliore",matte:"Opaco",silk:"Silk",galaxy:"Galassia",rainbow:"Arcobaleno",metal:"Metallo",translucent:"Traslucido",gradient:"Sfumatura",dualColor:"Bicolore",triColor:"Tricolore",multicolor:"Multicolore"},selectMaterialFirst:"Selezionare prima un materiale nella scheda Info filamento.",noPrintersConfigured:"Nessuna stampante configurata. Aggiungi stampanti per usare i profili PA.",matchingFilter:"Corrispondenti",anyBrand:"Qualsiasi marca",anyVariant:"Qualsiasi variante",autoSelect:"Selezione automatica",matches:"corrispondenze",match:"corrispondenza",noMatches:"Nessuna corrispondenza",connected:"Connessa",offline:"Offline",printerOffline:"La stampante è offline. Connetti per visualizzare i profili di calibrazione.",noKProfilesMatch:"Nessun profilo K corrisponde al filamento selezionato.",leftNozzle:"Ugello sinistro",rightNozzle:"Ugello destro",profilesSelected:"profili di calibrazione selezionati",totalInventory:"Inventario totale",totalConsumed:"Totale consumato",byMaterial:"Per materiale",inPrinter:"In stampante",lowStock:"Scorta bassa",sinceTracking:"Dall'inizio del tracciamento",resetConsumedCounter:"Azzera contatore",resetConsumedCounterTooltip:"Azzera il contatore di grammi consumati per questa bobina. Il peso rimanente non viene modificato.",resetConsumedCounterConfirm:"Azzerare il contatore di grammi consumati di questa bobina? Le stampe future ripartiranno da zero. La bobina, il calcolo del peso rimanente e le impostazioni non vengono modificati.",resetAllConsumedCounters:"Azzera tutti i contatori",resetAllConsumedCountersTooltip:"Azzera il contatore di grammi consumati su ogni bobina. I pesi rimanenti non vengono modificati.",resetAllConsumedCountersConfirm:'Azzerare il contatore di grammi consumati su tutte le {{count}} bobine (incluse quelle archiviate)? La statistica "Totale Consumato" verrà azzerata e le stampe future ripartiranno da zero. Bobine e pesi rimanenti restano invariati.',consumedCounterReset:"Contatore azzerato",allConsumedCountersReset:"Contatore azzerato per {{count}} bobina/e",resetConsumedCounterFailed:"Impossibile azzerare il contatore",loadedInAms:"Caricato in AMS/Est",remaining:"Rimanente",weightCheck:"Controllo Peso",lastWeighed:"Ultima pesatura",neverWeighed:"Mai pesato",search:"Cerca bobine...",showing:"Visualizzazione",to:"a",of:"di",show:"Mostra",spools:"bobine",spool:"bobina",page:"Pagina",noSpoolsMatch:"Nessun risultato trovato",noSpoolsMatchDesc:"Prova a modificare la ricerca o i filtri per trovare quello che cerchi.",active:"Attive",archived:"Archiviate",all:"Tutte",used:"Usato",new:"Nuovo",clearFilters:"Cancella filtri",table:"Tabella",cards:"Schede",net:"Netto",groupSimilar:"Raggruppa",groupedSpools:"{{count}} bobine identiche",groupedRows:"righe",columns:"Colonne",configureColumns:"Configura colonne",configureColumnsDesc:"Trascina per riordinare le colonne o usa le frecce. Attiva/disattiva la visibilità con l'icona dell'occhio.",visible:"visibili",reset:"Ripristina",cancel:"Annulla",applyChanges:"Applica modifiche",moveUp:"Sposta su",moveDown:"Sposta giù",hideColumn:"Nascondi colonna",showColumn:"Mostra colonna",linkToSpool:"Collega a bobina",tagLinked:"Tag collegato alla bobina",tagLinkFailed:"Impossibile collegare il tag",tagAlreadyLinked:"Tag già collegato a un'altra bobina",unknownTag:"Tag RFID sconosciuto rilevato",usageHistory:"Cronologia utilizzo",noUsageHistory:"Nessun utilizzo registrato",printName:"Nome stampa",weightConsumed:"Peso consumato",clearHistory:"Cancella",historyCleared:"Cronologia utilizzo cancellata",fillSourceLabel:"(Inv)",lowStockThresholdError:"La soglia deve essere tra 0.1 e 99.9",assignMismatchTitle:"Materiale non corrispondente",assignMismatchMessage:'Il materiale della bobina selezionata "{{spoolMaterial}}" non corrisponde al materiale del vassoio "{{trayMaterial}}" per {{location}}. Assegnare comunque?',assignMismatchConfirm:"Assegna comunque",assignPartialMismatchMessage:'Il materiale della bobina "{{spoolMaterial}}" è simile ma non corrisponde esattamente a "{{trayMaterial}}" in {{location}}. Vuoi procedere?',assignProfileMismatchMessage:'Il profilo della bobina "{{spoolProfile}}" non corrisponde al profilo del vassoio "{{trayProfile}}" in {{location}}. Vuoi procedere?',assignReconfigureNote:"Lo slot AMS verrà riconfigurato per utilizzare il profilo della bobina.",spoolmanFilamentCatalog:"Catalogo filamenti Spoolman",pickFromSpoolmanCatalog:"Scegli dal catalogo Spoolman…",spoolmanFilamentSelected:"Filamento selezionato dal catalogo Spoolman",spoolmanFilamentUnlinked:"Collegamento al catalogo filamenti rimosso",noSpoolmanFilaments:"Nessun filamento trovato nel catalogo Spoolman",spoolmanFilamentColorSwatch:"Colore del filamento",spoolWeightManagedBySpoolman:"Il peso della bobina vuota è gestito per tipo di filamento in Spoolman",spoolmanCatalogLoadFailed:"Impossibile caricare il catalogo Spoolman"},timelapse:{title:"Timelapse",create:"Crea timelapse",download:"Scarica",delete:"Elimina",preview:"Anteprima",frameRate:"Frame rate",quality:"Qualità",processing:"Elaborazione...",noTimelapses:"Nessun timelapse disponibile"},ams:{title:"AMS",slot:"Slot",empty:"Vuoto",emptySlot:"Slot vuoto",slotEmpty:"Vuoto",emptySlotReset:"Nessuna bobina assegnata",unknown:"Sconosciuto",humidity:"Umidità",temperature:"Temperatura",filamentType:"Tipo filamento",filamentColor:"Colore",remaining:"Rimanente",history:"Cronologia AMS",noHistory:"Nessuna cronologia disponibile",configureSlot:"Configura slot",externalSpool:"Bobina esterna",profile:"Profilo",kFactor:"Fattore K",fill:"Livello",configure:"Configura",used:"utilizzato",remainingUnit:"rimanente"},printModal:{title:"Avvia stampa",selectPrinter:"Seleziona stampante",selectPlate:"Seleziona piatto",filamentMapping:"Mappatura filamento",totalCost:"Costo totale:",slotRemainingShort:" - {{grams}}g rim.",printSettings:"Impostazioni stampa",bedLeveling:"Livellamento piatto",flowCalibration:"Calibrazione flusso",vibrationCalibration:"Calibrazione vibrazioni",layerInspection:"Ispezione primo layer",timelapse:"Timelapse",startPrint:"Avvia stampa",addToQueue:"Aggiungi alla coda",cancel:"Annulla",noPrintersAvailable:"Nessuna stampante disponibile",printerBusy:"Stampante occupata",printerOffline:"Stampante offline",sameTypeDifferentColor:"Stesso tipo, colore diverso",filamentTypeNotLoaded:"Tipo di filamento non caricato",openCalendar:"Apri calendario",leftNozzle:"L",rightNozzle:"R",leftNozzleTooltip:"Ugello sinistro",rightNozzleTooltip:"Ugello destro",filamentOverride:"Sostituzione filamento",filamentOverrideHint:"Sostituisci opzionalmente i filamenti per l'assegnazione basata sul modello. Lo scheduler abbinerà i filamenti selezionati invece dei valori 3MF originali.",originalFilament:"Originale",overrideWith:"Sostituisci con",resetToOriginal:"Ripristina originale",insufficientFilamentTitle:"Filamento insufficiente",insufficientFilamentMessage:"Alcune bobine assegnate hanno meno filamento rimanente di quanto necessario per questa stampa:",insufficientFilamentLine:"{{printer}} - {{slot}}: necessita di {{required}}g, rimanenti {{remaining}}g",printAnyway:"Stampa comunque",forceColorMatch:"Forza corrispondenza colore",staggerPrinterStarts:"Scaglionare avvii",staggerGroupSize:"Dimensione gruppo",staggerInterval:"Intervallo (min)",staggerPreview:"{{printers}} stampanti → {{groups}} gruppi di {{size}}, avvio ogni {{interval}} min",staggerLastGroup:"ultimo gruppo: {{count}}",staggerTotal:"totale: {{minutes}} min",staggerToPrinters:"Scagliona a {{count}} stampanti",gcodeInjection:"Inietta G-code auto-stampa"},backup:{includesEncryptionKey:"I backup locali includono il file della chiave di crittografia MFA (DATA_DIR/.mfa_encryption_key), quindi un backup ZIP è autonomo. Tratta lo ZIP come sensibile — chiunque abbia il file può decifrare i client secret OIDC e i segreti TOTP contenuti.",title:"Backup e ripristino",createBackup:"Crea backup",restoreBackup:"Ripristina backup",restoreDescription:"Sostituisci tutti i dati da un file di backup",downloadBackup:"Scarica backup",uploadBackup:"Carica backup",lastBackup:"Ultimo backup",autoBackup:"Backup automatico",backupNow:"Esegui backup ora",restoreWarning:"Avviso: il ripristino sovrascriverà tutti i dati attuali.",includeArchives:"Includi archivi",includeSettings:"Includi impostazioni",includeProfiles:"Includi profili",backupSuccess:"Backup creato con successo",restoreSuccess:"Backup ripristinato con successo",backupFailed:"Backup fallito",restoreFailed:"Ripristino fallito",restoreNote:"La stampante virtuale verrà fermata durante il ripristino",githubBackup:"Backup GitHub",enabled:"Abilitato",cloudLoginRequired:"Accesso Bambu Cloud richiesto. Accedi in Profili → Profili Cloud per abilitare il backup GitHub.",cloudLoginRequiredShort:"Accesso Cloud richiesto",githubDescription:"Sincronizza automaticamente i tuoi profili con un repository GitHub privato per backup e cronologia delle versioni.",repoIsPrivate:"Il repository è privato — è sicuro effettuare il backup.",repoIsPublicWarning:"Il repository è PUBBLICO. I backup di Bambuddy includono credenziali MQTT, token di Home Assistant, token di Prometheus, la tua e-mail Bambu Cloud e i codici di accesso alle stampanti tramite K-profile. Il salvataggio è bloccato finché non rendi privato il repository nelle impostazioni del tuo provider.",repoVisibilityUnknown:"Impossibile determinare la visibilità del repository. Bambuddy rifiuta di eseguire backup su qualsiasi target non confermato come privato; il salvataggio sarà bloccato.",repositoryUrl:"URL del repository",repoUrlPlaceholderGitHub:"https://github.com/username/repo-name",repoUrlPlaceholderGitea:"https://gitea.example.com/username/repo-name",repoUrlPlaceholderForgejo:"https://forgejo.example.com/username/repo-name",repoUrlPlaceholderGitLab:"https://gitlab.com/username/repo-name",allowInsecureHttp:"Consenti HTTP non sicuro",allowInsecureHttpHint:"Abilita per istanze self-hosted su reti private senza TLS",personalAccessToken:"Token di accesso personale",tokenSaved:"(salvato)",enterNewToken:"Inserisci un nuovo token per aggiornare",tokenHint:"Token a grana fine con permesso di lettura/scrittura dei contenuti",branch:"Branch",provider:"Provider Git",providerGitHub:"GitHub",providerGitLab:"GitLab",providerGitea:"Gitea",providerForgejo:"Forgejo",manualOnly:"Solo manuale",hourly:"Ogni ora",daily:"Giornaliero",weekly:"Settimanale",includeInBackup:"Includi nel backup",kProfiles:"K-Profili",kProfilesDescription:"Calibrazione dell'avanzamento pressione dalle stampanti connesse",noPrintersConnected:"Nessuna stampante connessa",printersConnected:"{{connected}}/{{total}} connesse",cloudProfiles:"Profili Cloud",cloudProfilesDescription:"Preset di filamento, stampante e processo da Bambu Cloud",appSettings:"Impostazioni App",appSettingsDescription:"Configurazione Bambuddy (database completo)",spoolInventory:"Inventario bobine",spoolInventoryDescription:"Bobine di filamento, cronologia utilizzo e tracciamento costi",printArchives:"Archivi di stampa",printArchivesDescription:"Metadati della cronologia di stampa (nessun file gcode/3MF)",lastBackupAt:"Ultimo backup:",noBackupsYet:"Nessun backup ancora",next:"Prossimo:",startingBackup:"Avvio del backup...",test:"Test",enableBackup:"Abilita backup",testConnection:"Testa connessione",enterRepoUrl:"Inserisci l'URL del repository",enterRepoAndToken:"Inserisci l'URL del repository e il token di accesso",repoRequired:"L'URL del repository è obbligatorio",tokenRequired:"Il token di accesso è obbligatorio",githubBackupEnabled:"Backup GitHub abilitato",tokenUpdated:"Token aggiornato",settingsSaved:"Impostazioni salvate",failedToSave:"Salvataggio fallito: {{message}}",backupCompleteFiles:"Backup completato - {{count}} file aggiornati",backupSkippedNoChanges:"Backup saltato - nessuna modifica",backupFailed2:"Backup fallito: {{message}}",clearedLogs:"{{count}} log eliminati",failedToClearLogs:"Eliminazione log fallita: {{message}}",history:"Cronologia",clear:"Cancella",date:"Data",status:"Stato",commit:"Commit",localBackup:"Backup locale",localBackupDescription:"Crea un backup completo dei tuoi dati Bambuddy includendo database, archivi, upload e tutti i file.",downloadBackupLabel:"Scarica backup",completeBackupZip:"Backup completo: database + tutti i file (ZIP)",download:"Scarica",preparingBackup:"Preparazione del backup...",creatingArchive:"Creazione dell'archivio di backup... Potrebbe richiedere del tempo per archivi di grandi dimensioni.",downloadingFile:"Download del file di backup...",backupDownloaded:"Backup scaricato con successo",failedToCreateBackup:"Creazione del backup fallita: {{message}}",restore:"Ripristina",restoreReplacesAll:"Il ripristino sostituisce tutti i dati.",restoreReplacesAllDetail:"Il database e i file attuali verranno completamente sostituiti. È necessario un riavvio dopo il ripristino.",restoreConfirmTitle:"Ripristina backup",restoreConfirmMessage:`Sei sicuro di voler ripristinare da "{{filename}}"? Questo sostituirà completamente il tuo database e tutti i file. L'applicazione dovrà essere riavviata dopo il ripristino.`,restoreConfirmButton:"Ripristina backup",uploadingFile:"Caricamento del file di backup...",backupRestoredRestart:"Backup ripristinato. Riavvia Bambuddy.",failedToRestore:"Ripristino del backup fallito. Controlla il formato del file.",reloadNow:"Ricarica ora",creatingBackup:"Creazione del backup",restoringBackup:"Ripristino del backup",preparing:"Preparazione...",processing:"Elaborazione...",doNotClosePage:"Non chiudere questa pagina e non navigare altrove. Questa operazione potrebbe richiedere diversi minuti per backup di grandi dimensioni.",restoring:"Ripristino in corso...",restoreComplete:"Ripristino completato",restoreFailed2:"Ripristino fallito",importSettings:"Importa impostazioni da un file di backup",pleaseWaitRestoring:"Attendere durante il ripristino dei dati",selectBackupFile:"Clicca per selezionare un file di backup (.json o .zip)",duplicateHandling:"Come funziona la gestione dei duplicati:",matchPrinters:"Stampanti",matchPrintersBy:"corrispondenza per numero di serie",matchSmartPlugs:"Smart Plug",matchSmartPlugsBy:"corrispondenza per indirizzo IP",matchNotificationProviders:"Provider di notifica",matchNotificationProvidersBy:"corrispondenza per nome",matchFilaments:"Filamenti",matchFilamentsBy:"corrispondenza per nome + tipo + marca",matchArchives:"Archivi",matchArchivesBy:"corrispondenza per hash del contenuto (sempre saltato)",matchPendingUploads:"Upload in sospeso",matchPendingUploadsBy:"corrispondenza per nome file",matchSettingsTemplates:"Impostazioni e modelli",matchSettingsTemplatesBy:"sempre sovrascritti",replaceExisting:"Sostituisci dati esistenti",keepExisting:"Mantieni dati esistenti",overwriteDescription:"Sovrascrivi gli elementi già esistenti con i dati del backup",keepDescription:"Ripristina solo gli elementi che non esistono ancora",overwriteCaution:"Attenzione:",overwriteWarning:"La sovrascrittura sostituirà le configurazioni attuali con i dati del backup. I codici di accesso delle stampanti non vengono mai sovrascritti per sicurezza.",cancel:"Annulla",processingBackup:"Elaborazione del file di backup...",itemsRestored:"Elementi ripristinati",itemsSkipped:"Elementi saltati",restored:"Ripristinati",skippedAlreadyExist:"Saltati (già esistenti)",filesCategory:"File (3MF, miniature, ecc.)",andMore:"...e altri {{count}}",newApiKeysGenerated:"Nuove chiavi API generate",keysShownOnce:"Queste chiavi vengono mostrate solo una volta. Copiale ora!",copy:"Copia",noDataFound:"Nessun dato da ripristinare trovato nel file di backup.",close:"Chiudi",scheduledBackup:"Backup pianificati",scheduledBackupDescription:"Crea automaticamente snapshot di backup secondo una pianificazione. La directory di output può essere montata su un NAS o storage esterno.",frequency:"Frequenza",backupTime:"Tempo",retention:"Conservazione",retentionDescription:"Numero di backup da conservare",outputPath:"Percorso di output",outputPathPlaceholder:"Predefinito: {{path}}",outputPathDescription:"Lasciare vuoto per la posizione predefinita",runNow:"Esegui ora",backupFiles:"File di backup",noScheduledBackups:"Nessun backup ancora",deleteBackup:"Elimina",deleteBackupConfirm:"Eliminare questo file di backup?",backupRunning:"Backup in corso...",scheduledBackupComplete:"Backup completato con successo",scheduledBackupFailed:"Backup fallito",nextBackup:"Prossimo backup",backupSize:"Dimensione",localTimeHint:"Ora locale ({{tz}})",defaultPathLabel:"Predefinito:",categories:{settings:"Impostazioni",notification_providers:"Provider di notifica",notification_templates:"Modelli di notifica",smart_plugs:"Smart Plug",printers:"Stampanti",filaments:"Filamenti",maintenance_types:"Tipi di manutenzione",archives:"Archivi",projects:"Progetti",pending_uploads:"Upload in sospeso",external_links:"Link esterni",api_keys:"Chiavi API"}},tags:{title:"Tag",addTag:"Aggiungi tag",editTag:"Modifica tag",deleteTag:"Elimina tag",tagName:"Nome tag",tagColor:"Colore tag",noTags:"Nessun tag",deleteConfirm:"Sei sicuro di voler eliminare questo tag?",manageTags:"Gestisci tag"},uploadModal:{title:"Carica file 3MF",dragDrop:"Trascina e rilascia file .3mf qui",or:"o",browseFiles:"Sfoglia file",extractionInfo:"Il modello stampante sarà estratto automaticamente dai metadati del file 3MF.",uploaded:"caricati",failed:"falliti",uploading:"Caricamento...",upload:"Carica",uploadFailed:"Caricamento fallito"},editArchive:{title:"Modifica archivio",name:"Nome",namePlaceholder:"Nome stampa",printer:"Stampante",noPrinter:"Nessuna stampante",project:"Progetto",noProject:"Nessun progetto",itemsPrinted:"Elementi stampati",itemsPrintedHelp:"Numero di elementi prodotti in questo job di stampa",notes:"Note",notesPlaceholder:"Aggiungi note su questa stampa...",externalLink:"Link esterno",externalLinkPlaceholder:"https://printables.com/model/...",externalLinkHelp:"Link a Printables, Thingiverse o altra fonte",tags:"Tag",tagsPlaceholder:"Aggiungi tag...",addMoreTags:"Aggiungi altri tag...",matchingTags:'Tag corrispondenti "{{query}}"',existingTags:"Tag esistenti",clickToAdd:"(clicca per aggiungere)",status:"Stato",failureReason:"Motivo fallimento",selectReason:"Seleziona motivo...",photos:"Foto del risultato stampato",photosHelp:"Clicca + per aggiungere foto del risultato stampato",printResult:"Risultato stampa",saving:"Salvataggio...",failureReasons:{adhesionFailure:"Fallimento adesione",spaghettiDetached:"Spaghetti / staccato",layerShift:"Spostamento layer",cloggedNozzle:"Ugello intasato",filamentRunout:"Filamento esaurito",warping:"Deformazione",stringing:"Filamento",underExtrusion:"Sotto-estrusione",powerFailure:"Mancanza corrente",userCancelled:"Annullato dall'utente",other:"Altro"},statuses:{completed:"Completato",failed:"Fallito",aborted:"Annullato",printing:"In stampa"}},kProfiles:{title:"Profili K",noPrintersConfigured:"Nessuna stampante configurata",addPrinterInSettings:"Aggiungi una stampante in Impostazioni per gestire i K-profiles",noActivePrinters:"Nessuna stampante attiva",enablePrinterConnection:"Abilita una connessione stampante per vedere i K-profiles",loadingProfiles:"Caricamento K-Profiles...",printerOffline:"Stampante offline",printerOfflineDesc:"La stampante selezionata non e connessa. Accendila per vedere i K-profiles.",noMatchingProfiles:"Nessun profilo corrispondente",noMatchingProfilesDesc:"Nessun profilo corrisponde ai criteri di ricerca",noKProfiles:"Nessun K-Profile",noKProfilesDesc:"Nessun profilo pressure advance per ugello da {{diameter}}mm",createFirstProfile:"Crea primo profilo",printer:"Stampante",nozzle:"Ugello",refresh:"Aggiorna",addProfile:"Aggiungi profilo",export:"Esporta",import:"Importa",select:"Seleziona",selectAll:"Seleziona tutto",delete:"Elimina",searchPlaceholder:"Cerca per nome o filamento...",allExtruders:"Tutti gli estrusori",leftOnly:"Solo sinistro",rightOnly:"Solo destro",allFlow:"Tutto flow",hfOnly:"Solo HF",sOnly:"Solo S",sortName:"Ordina: Nome",sortKValue:"Ordina: K-Value",sortFilament:"Ordina: Filamento",leftExtruder:"Estrusore sinistro",rightExtruder:"Estrusore destro",modal:{addTitle:"Aggiungi K-Profile",editTitle:"Modifica K-Profile",profileName:"Nome profilo",profileNamePlaceholder:"Il mio profilo PLA",kValue:"Valore K",kValuePlaceholder:"0.020",kValueHelp:"Intervallo tipico: 0.01 - 0.06 per PLA, 0.02 - 0.10 per PETG",filament:"Filamento",selectFilament:"Seleziona filamento...",noFilamentsHelp:"Nessun filamento trovato. Crea prima un K-profile in Bambu Studio.",flowType:"Tipo flow",highFlow:"Alto flusso",standard:"Standard",nozzleSize:"Dimensione ugello",extruder:"Estrusore",extruders:"Estrusori",left:"Sinistra",right:"Destra",notes:"Note (salvate localmente)",notesPlaceholder:"Aggiungi note su questo profilo...",notesHelp:"Le note sono salvate in Bambuddy, non sulla stampante",syncing:"Sincronizzazione con stampante...",savingExtruder:"Salvataggio su estrusore {{current}}/{{total}}...",pleaseWait:"Attendere"},deleteConfirm:{title:"Elimina profilo",cannotUndo:"Questo non può essere annullato",message:'Sei sicuro di voler eliminare "{{name}}" dalla stampante?'},bulkDelete:{title:"Elimina profili",cannotUndo:"Questo non può essere annullato",message:"Sei sicuro di voler eliminare {{count}} profili selezionati dalla stampante?"},toast:{profileSaved:"K-profile salvato",profilesSaved:"K-profile salvato su {{count}} estrusori",selectAtLeastOneExtruder:"Seleziona almeno un estrusore",profileDeleted:"K-profile eliminato",profilesDeleted:"Eliminati {{count}} profili",exportedProfiles:"Esportati {{count}} profili",importedProfiles:"Importati {{count}} di {{total}} profili",noProfilesToExport:"Nessun profilo da esportare",invalidFileFormat:"Formato file non valido",failedToParseImport:"Parsing file import fallito",failedToSaveBatch:"Salvataggio K-profiles fallito",noteSaved:"Nota salvata",failedToSaveNote:"Salvataggio nota fallito"},permission:{noRead:"Non hai il permesso di aggiornare i profili",noCreate:"Non hai il permesso di aggiungere profili",noUpdate:"Non hai il permesso di aggiornare K-profiles",noDelete:"Non hai il permesso di eliminare K-profiles",noExport:"Non hai il permesso di esportare profili",noImport:"Non hai il permesso di importare profili"}},virtualPrinter:{title:"Stampante virtuale",running:"In esecuzione",stopped:"Ferma",description:{default:"Abilita una stampante virtuale che appare in Bambu Studio e OrcaSlicer. I file inviati a questa stampante saranno archiviati senza stampare.",proxy:"Abilita un proxy che inoltra il traffico slicer a una stampante reale, permettendo la stampa remota su qualsiasi rete."},enable:{title:"Abilita stampante virtuale",visibleInSlicer:'Visibile come "Bambuddy" nella ricerca slicer',proxyingTo:"In proxy verso {{name}}",notActive:"Non attivo"},model:{title:"Modello stampante",description:"Seleziona il modello stampante da emulare.",restartWarning:"Cambiare il modello riavviera la stampante virtuale"},accessCode:{title:"Codice accesso",isSet:"Codice accesso impostato",notSet:"Nessun codice accesso impostato - richiesto per abilitare",placeholder:"Inserisci codice 8 caratteri",placeholderChange:"Inserisci nuovo codice per cambiare",hint:"Deve essere esattamente 8 caratteri. Usato dagli slicer per autenticarsi.",charCount:"({{count}}/8)"},targetPrinter:{title:"Stampante target",configured:"Target proxy configurato",notConfigured:"Nessuna stampante target selezionata - richiesta per modalita proxy",placeholder:"Seleziona una stampante...",hint:"Seleziona la stampante a cui fare proxy. La stampante deve essere in modalita LAN.",noPrinters:"Nessuna stampante configurata. Aggiungi una stampante per usare la modalita proxy."},remoteInterface:{title:"Sovrascrittura interfaccia di rete",configured:"Sovrascrittura interfaccia attiva",optional:"Opzionale - usare se l'IP rilevato automaticamente e sbagliato (es. piu NIC, Docker, VPN)",placeholder:"Rilevamento automatico (predefinito)...",hint:"Sovrascrive l'indirizzo IP pubblicizzato via SSDP e usato nel certificato TLS. Utile quando Bambuddy ha piu interfacce di rete."},mode:{title:"Modalita",archive:"Archivio",archiveDesc:"Archivia subito i file",review:"Revisione",reviewDesc:"Rivedi prima di archiviare",queue:"Coda",queueDesc:"Archivia e aggiungi alla coda",proxy:"Proxy",proxyDesc:"Inoltra a stampante reale"},autoDispatch:{title:"Avvio automatico",description:"Avvia automaticamente le stampe aggiunte alla coda. Se disattivato, le stampe attendono l'avvio manuale."},queueForceColorMatch:{title:"Forza corrispondenza colori",description:"Rifiuta di inviare a una stampante che non ha esattamente il tipo di filamento e il colore caricato. Disattivato per impostazione predefinita — senza questo, la coda usa solo la corrispondenza per modello e potrebbe scegliere una stampante con il colore sbagliato."},tailscaleDisabled:{title:"Integrazione Tailscale",description:"Abilita per contrassegnare questo VP come esposto tramite Tailscale. Mostra l'indirizzo Tailscale dell'host così sai quale IP incollare nello slicer. Il passo di importazione CA è invariato — questo toggle non ha effetto sui certificati."},setupRequired:{title:"Configurazione necessaria",description:"La stampante virtuale richiede configurazioni di sistema aggiuntive prima di funzionare. Include port forwarding, regole firewall e impostazioni specifiche della piattaforma.",readGuide:"Leggi la guida prima di abilitare"},howItWorks:{title:"Come funziona",step1:"Sulla stessa LAN, le stampanti virtuali appaiono automaticamente nel tuo slicer (Bambu Studio / OrcaSlicer). Da altre reti, aggiungile manualmente tramite indirizzo IP e codice di accesso.",step2:'In modalità Archivio, Revisione e Coda, usa il pulsante "Invia" nel tuo slicer per caricare file 3MF su Bambuddy. Lo slicer mostrerà "Stampa riuscita" — il file viene salvato, non stampato.',step3:"In modalità Proxy, la stampante virtuale inoltra tutto il traffico a una stampante reale — le stampe partono immediatamente come con una connessione diretta."},status:{title:"Dettagli stato",printerName:"Nome stampante",model:"Modello",serialNumber:"Numero seriale",mode:"Modalita",pendingFiles:"File in sospeso",targetPrinter:"Stampante target",ftpPort:"Porta FTP",mqttPort:"Porta MQTT",ftpConnections:"Connessioni FTP",mqttConnections:"Connessioni MQTT"},toast:{updated:"Impostazioni stampante virtuale aggiornate",failedToUpdate:"Aggiornamento impostazioni fallito",copyFailed:"Copia non riuscita — seleziona il testo manualmente",accessCodeRequired:"Imposta prima un codice accesso",targetPrinterRequired:"Seleziona prima una stampante target",bindIpRequired:"Impostare prima un indirizzo IP",accessCodeEmpty:"Il codice accesso non può essere vuoto",accessCodeLength:"Il codice accesso deve essere esattamente 8 caratteri",created:"Stampante virtuale creata",failedToCreate:"Impossibile creare la stampante virtuale",deleted:"Stampante virtuale eliminata",failedToDelete:"Impossibile eliminare la stampante virtuale"},list:{title:"Stampanti virtuali",add:"Aggiungi",addFirst:"Aggiungi stampante virtuale",empty:"Nessuna stampante virtuale configurata. Aggiungine una per iniziare."},bindIp:{title:"Interfaccia di rete",placeholder:"Seleziona interfaccia...",hint:"Interfaccia di rete a cui questa stampante virtuale si collega. Deve essere unica per stampante."},proxy:{accessCodeHint:"In modalita proxy, usa il codice di accesso della stampante di destinazione nello slicer. La connessione viene inoltrata in modo trasparente alla stampante reale."},addDialog:{title:"Aggiungi stampante virtuale",name:"Nome",hint:"Potrai configurare il codice di accesso, la stampante di destinazione e altre impostazioni dopo la creazione.",create:"Crea"},deleteConfirm:{title:"Elimina stampante virtuale",message:'Sei sicuro di voler eliminare "{{name}}"? Tutti i servizi di questa stampante verranno interrotti.'},archiveNameSource:{title:"Origine nome archivio",description:'Scegli come vengono nominati i nuovi archivi quando i file arrivano tramite la stampante virtuale. "Metadati" utilizza il titolo incorporato nello slicer dal 3MF (default). "Nome file" utilizza il nome che Bambu Studio ha inviato via FTP — utile se hai rinominato il job nella finestra "invia a stampante".',metadata:"Metadati",filename:"Nome file"},caCert:{title:"Certificato dello slicer",description:"Le stampanti virtuali usano un certificato TLS firmato dalla CA di Bambuddy. Importa questo certificato CA nell'archivio attendibile del tuo slicer una sola volta affinché accetti la connessione — senza doverlo copiare dalla riga di comando.",copy:"Copia",copied:"Copiato",download:"Scarica",fingerprint:"SHA-256"}},modelViewer:{openInSlicer:"Apri nello slicer",tabs:{model:"Modello 3D",gcode:"Anteprima G-code"},notAvailable:"non disponibile",notSliced:"non sezionato",plates:"Piatti",allPlates:"Tutti i piatti",plateNumber:"Piatto {{number}}",plateCount:"{{count}} piatto",plateCount_other:"{{count}} piatti",objectCount:"{{count}} oggetto",objectCount_other:"{{count}} oggetti",filamentCount:"{{count}} filamento",filamentCount_other:"{{count}} filamenti",eta:"ETA {{minutes}} min",noPreview:"Nessuna anteprima disponibile per questo file",pagination:{pageOf:"Pagina {{current}} di {{total}}",prev:"Prec",next:"Succ"},errors:{failedToLoad:"Caricamento file fallito",noMeshes:"Nessuna mesh trovata nel file 3MF",unsupportedFormat:"Formato file non supportato"}},maintenanceDescriptions:{lubricateCarbonRods:"Applica lubrificante alle aste in carbonio per un movimento fluido",lubricateRails:"Applica lubrificante alle guide lineari per un movimento fluido",cleanNozzle:"Pulisci hotend e ugello per prevenire intasamenti",checkBelts:"Verifica tensione cinghie per stampe accurate",cleanBuildPlate:"Pulisci il piatto per migliorare l'adesione",checkExtruder:"Ispeziona ingranaggi estrusore per usura",checkCooling:"Assicurati che le ventole di raffreddamento funzionino",generalInspection:"Ispezione generale stampante",cleanCarbonRods:"Pulisci le aste in carbonio per ridurre attrito",lubricateSteelRods:"Applica lubrificante alle aste in acciaio per un movimento fluido",cleanSteelRods:"Pulisci le aste in acciaio per ridurre attrito",cleanLinearRails:"Pulisci le guide lineari per rimuovere polvere e detriti",checkPtfeTube:"Ispeziona il tubo PTFE per usura o danni",replaceHepaFilter:"Sostituisci filtro HEPA per qualità aria",replaceCarbonFilter:"Sostituisci filtro a carbone attivo",lubricateLeftNozzleRail:"Lubrifica guida ugello sinistro (serie H2)"},smartPlugs:{offline:"Offline",admin:"Amministrazione",openPlugAdminPage:"Apri pagina amministrazione presa",deleteSmartPlug:"Elimina presa smart",turnOnSmartPlug:"Accendi presa smart",turnOffSmartPlug:"Spegni presa smart",turnOn:"Accendi",turnOff:"Spegni",addSmartPlug:{scanningNetwork:"Scansione rete...",chooseEntity:"Scegli un'entità...",connectionFailed:"Connessione fallita",searchEntities:"Cerca entità...",searchPowerSensors:"Cerca sensori di potenza...",searchEnergySensors:"Cerca sensori di energia...",placeholders:{plugName:"Presa soggiorno",mqttStateOnValue:"ON, true, 1",mqttSameAsPower:"Stesso del topic potenza, o diverso"}},linkedTo:"Collegato a:",monitorOnly:"Solo monitoraggio",alerts:"Avvisi",scheduleOn:"Alle {{time}}",scheduleOff:"Spento {{time}}",on:"On",off:"Spento",power:"Potenza",kwhToday:"kWh Oggi",settings:"Impostazioni",automationSettings:"Impostazioni automazione",showInSwitchbar:"Mostra nella barra interruttori",quickAccessSidebar:"Accesso rapido dalla barra laterale",enabled:"Abilitato",enableAutomation:"Abilita automazione per questa presa",autoOn:"Auto On",autoOnDescription:"Accendi quando inizia la stampa",autoOff:"Auto Off",autoOffDescription:"Spegni quando la stampa è completata (una tantum)",autoOffPersistent:"Mantieni attivo",autoOffPersistentDescription:"Resta attivo tra le stampe invece di una tantum",autoOffAfterDrying:"Spegni dopo asciugatura",autoOffAfterDryingDescription:"Spegni al termine dell'asciugatura AMS",delayAfterDryingMinutes:"Ritardo dopo asciugatura (minuti)",turnOffDelayMode:"Modalità ritardo spegnimento",time:"Tempo",temp:"Temp.",delayMinutes:"Ritardo (minuti)",tempThreshold:"Soglia temperatura (°C)",tempThresholdDescription:"Si spegne quando l'ugello si raffredda sotto questa temperatura",edit:"Modifica",deleteConfirm:'Sei sicuro di voler eliminare "{{name}}"? Questa azione non può essere annullata.',turnOnConfirm:'Sei sicuro di voler accendere "{{name}}"?',turnOffConfirm:`Sei sicuro di voler spegnere "{{name}}"? Questo interromperà l'alimentazione del dispositivo collegato.`,failedToTurn:'Impossibile {{action}} "{{name}}"',unknown:"Sconosciuto",addTitle:"Aggiungi presa smart",editTitle:"Modifica presa smart",stopScanning:"Interrompi scansione",discoverTasmota:"Scopri dispositivi Tasmota",foundDevices:"{{count}} dispositivo/i trovato/i - clicca per selezionare:",noDevicesFound:"Nessun dispositivo Tasmota trovato nella rete",haNotConfigured:"Home Assistant non è configurato. Configuralo in",haSettingsPath:"Impostazioni → Rete → Home Assistant",selectEntity:"Seleziona entità *",ipAddress:"Indirizzo IP *",nameLabel:"Nome *",username:"Nome utente",password:"Password",authHint:"Lascia vuoto se il tuo dispositivo Tasmota non richiede autenticazione",linkToPrinter:"Collega alla stampante",noPrinter:"Nessuna stampante (solo controllo manuale)",linkingDescription:"Il collegamento abilita accensione/spegnimento automatico all'inizio/fine stampa",powerAlerts:"Avvisi potenza",alertAbove:"Avviso se sopra (W)",alertBelow:"Avviso se sotto (W)",alertDescription:"Ricevi notifiche quando il consumo supera queste soglie. Lascia vuoto per disabilitare quella direzione.",dailySchedule:"Programma giornaliero",turnOnAt:"Accendi alle",turnOffAt:"Spegni alle",scheduleDescription:"Accendi/spegni automaticamente la presa a questi orari ogni giorno. Lascia vuoto per saltare quell'azione.",showOnPrinterCard:"Mostra sulla scheda stampante",displayOnPrinterCard:"Mostra pulsante sulla scheda stampante",connectedResult:"Connesso!",deviceLabel:"Dispositivo: {{name}} - ",stateLabel:"Stato: {{state}}",test:"Test",delete:"Elimina",save:"Salva",add:"Aggiungi",cancel:"Annulla",failedToStartScan:"Impossibile avviare la scansione",nameRequired:"Il nome è obbligatorio",entityRequired:"L'entità è obbligatoria per le prese Home Assistant",mqttTopicRequired:"Almeno un topic MQTT deve essere configurato per potenza, energia o monitoraggio stato",loadingEntities:"Caricamento entità...",loading:"Caricamento...",failedToLoadEntities:"Impossibile caricare le entità: {{error}}",noEntitiesMatching:'Nessuna entità trovata corrispondente a "{{search}}"',noEntitiesAvailable:"Nessuna entità disponibile",searchingEntities:"Ricerca in tutte le entità ({{count}} trovate)",showingEntities:"Mostrando switch, light, input_boolean ({{count}} disponibili)",energyMonitoringOptional:"Monitoraggio energia (Opzionale)",energyMonitoringHint:"Cerca e seleziona i sensori che forniscono dati di potenza/energia.",powerSensorW:"Sensore potenza (W)",energyTodayKwh:"Energia oggi (kWh)",totalEnergyKwh:"Energia totale (kWh)",noMatchingSensors:"Nessun sensore corrispondente",none:"Nessuno",mqttNotConfigured:"Broker MQTT non configurato. Imposta l'indirizzo del broker in",mqttSettingsPath:"Impostazioni → Rete → Pubblicazione MQTT",mqttNotConfiguredSuffix:"(non è necessario abilitare la pubblicazione, basta inserire i dettagli del broker).",mqttMonitorOnlyDescription:"Le prese MQTT ricevono dati di potenza/energia tramite sottoscrizione MQTT. Il controllo on/off non è disponibile - usa il tuo broker MQTT o sistema domotico.",powerMonitoring:"Monitoraggio potenza",energyMonitoring:"Monitoraggio energia",stateMonitoring:"Monitoraggio stato",optional:"opzionale",topic:"Argomento",jsonPath:"Percorso JSON",multiplier:"Moltiplicatore",onValue:"Valore ON",mqttPowerHint:`Il percorso JSON estrae il valore dal payload JSON (es. "power_l1"). Lascia vuoto se il topic pubblica valori numerici grezzi.
+ON値: "ON"を意味する正確な文字列。自動検出（ON、true、1）の場合は空のままにしてください。`,restControl:"コントロール",restOnUrl:"オンURL",restOffUrl:"オフURL",restOnBody:"ONリクエスト本文",restOffBody:"OFFリクエスト本文",restMethod:"HTTPメソッド",restHeaders:"Custom Headers (JSON)",restStatusUrl:"ステータスURL",restStatusPath:"状態JSONパス",restStatusOnValue:"ON値",restPowerUrl:"電力URL",restPowerPath:"電力JSONパス",restPowerMultiplier:"電力乗数",restEnergyUrl:"エネルギーURL",restEnergyPath:"電力量JSONパス",restEnergyMultiplier:"エネルギー乗数",restUrlRequired:"RESTプラグには少なくとも1つのURL（ONまたはOFF）が必要",restHeadersHint:'例: {"Authorization": "Bearer your-token"}',restBodyHint:'例：ON, {"state": "on"}',restStatusHint:"現在の状態を取得するURL",restPathHint:"例: state または data.power.status",restPowerUrlHint:"電力データ用の個別URL（空欄の場合はステータスURLを使用）",restEnergyUrlHint:"エネルギーデータ用の個別URL（空欄の場合はステータスURLを使用）",restEnergyHint:"各値は個別のURLを使用するか、ステータスURLにフォールバックできます。乗数で単位変換が可能です（例：WhからkWhへの変換は0.001）。",testConnection:"接続テスト",connectionSuccess:"接続成功",noSwitchesInSwitchbar:"スイッチバーにスイッチがありません",enableSwitchbarHint:"設定 > スマートプラグで「スイッチバーに表示」を有効にしてください"},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"メール",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"SMTPメール通知",telegram:"Telegramボット経由の通知",discord:"Webhook経由でDiscordチャンネルに送信",ntfy:"無料のセルフホスト可能なプッシュ通知",pushover:"シンプルで信頼性の高いプッシュ通知",callmebot:"CallMeBot経由の無料WhatsApp通知",webhook:"任意のURLへの汎用HTTP POST",homeassistant:"Home Assistantダッシュボードの永続通知"},lastSuccess:"最終: {{date}}",error:"エラー",printer:"プリンター:",allPrinters:"すべてのプリンター",sendTestNotification:"テスト通知を送信",eventSettings:"イベント設定",enabled:"有効",sendFromProvider:"このプロバイダーから通知を送信",printEvents:"印刷イベント",printerStatus:"プリンターステータス",amsAlarms:"AMSアラーム",amsHtAlarms:"AMS-HTアラーム",printQueue:"印刷キュー",start:"開始",plateCheck:"プレートチェック",complete:"完了",failed:"失敗",stopped:"停止",progress:"進捗",offline:"オフライン",lowFilament:"フィラメント残量低下",maintenance:"メンテナンス",amsHumidity:"AMS湿度",amsTemp:"AMS温度",amsHtHumidity:"AMS-HT湿度",amsHtTemp:"AMS-HT温度",bedCooled:"ベッド冷却済み",firstLayer:"第1層完了",quiet:"静音",digest:"ダイジェスト {{time}}",printStarted:"印刷開始",plateNotEmpty:"プレートが空でない",plateNotEmptyDescription:"印刷前にオブジェクトが検出されました",printCompleted:"印刷完了",bedCooledLabel:"ベッド冷却済み",bedCooledDescription:"印刷後にベッドがしきい値以下に冷却",firstLayerCompleteLabel:"第1層完了",firstLayerCompleteDescription:"第1層完了時にスナップショット付きで通知",missingSpoolAssignmentLabel:"スプール割り当て不足",missingSpoolAssignmentDescription:"印刷開始時に必要トレイへスプールが未割り当ての場合に通知",printFailed:"印刷失敗",printStopped:"印刷停止",progressMilestones:"進捗マイルストーン",progressMilestonesDescription:"25%、50%、75%で通知",printerOffline:"プリンターオフライン",printerError:"プリンターエラー",lowFilamentLabel:"フィラメント残量低下",maintenanceDue:"メンテナンス期限",maintenanceDueDescription:"メンテナンスが必要な場合に通知",amsHumidityHigh:"AMS湿度高",amsHumidityHighDescription:"通常AMSの湿度がしきい値を超過",amsTemperatureHigh:"AMS温度高",amsTemperatureHighDescription:"通常AMSの温度がしきい値を超過",amsHtHumidityHigh:"AMS-HT湿度高",amsHtHumidityHighDescription:"AMS-HTの湿度がしきい値を超過",amsHtTemperatureHigh:"AMS-HT温度高",amsHtTemperatureHighDescription:"AMS-HTの温度がしきい値を超過",inventoryAlerts:"在庫アラート",stockReorderAlert:"発注アラート",stockReorderAlertDescription:"SKUが発注点に達しました",stockBreakAlert:"在庫切れアラート",stockBreakAlertDescription:"入荷前に在庫が枯渇する見込みです",jobAdded:"ジョブ追加",jobAddedDescription:"キューにジョブが追加されました",jobAssigned:"ジョブ割り当て",jobAssignedDescription:"モデルベースのジョブがプリンターに割り当てられました",jobStarted:"ジョブ開始",jobStartedDescription:"キュージョブの印刷が開始されました",jobWaiting:"ジョブ待機中",jobWaitingDescription:"フィラメントまたはプリンター待ちのジョブ",jobSkipped:"ジョブスキップ",jobSkippedDescription:"ジョブがスキップされました（前のジョブが失敗）",jobFailed:"ジョブ失敗",jobFailedDescription:"ジョブの開始に失敗しました",queueComplete:"キュー完了",queueCompleteDescription:"すべてのキュージョブが完了しました",quietHours:"静音時間",noNotificationsDuring:"この時間帯は通知を送信しません",editProviderToChangeQuietHours:"プロバイダーを編集して静音時間を変更",dailyDigest:"デイリーダイジェスト",batchNotifications:"通知をまとめて1日のサマリーとして送信",sendAt:"{{time}}に送信",editProviderToChangeDigestTime:"プロバイダーを編集してダイジェスト時刻を変更",edit:"編集",deleteProvider:"通知プロバイダーを削除",deleteConfirm:'"{{name}}"を削除してもよろしいですか？この操作は取り消せません。',delete:"削除",addTitle:"通知プロバイダーを追加",editTitle:"通知プロバイダーを編集",nameLabel:"名前 *",namePlaceholder:"マイ通知",providerTypeLabel:"プロバイダータイプ *",configuration:"設定",testConfiguration:"設定をテスト",printerFilter:"プリンターフィルター",onlyFromPrinter:"このプリンターからのイベントのみ通知を送信",quietHoursDnd:"静音時間（おやすみモード）",quietStart:"開始",quietEnd:"終了",dailyDigestLabel:"デイリーダイジェスト",sendDigestAt:"ダイジェスト送信時刻",digestCollected:"イベントが収集され、この時刻にまとめて送信されます",notificationEvents:"通知イベント",progressPercent:"（25%、50%、75%）",bedCooledAfterPrint:"（印刷完了後）",eventPriority:{sectionTitle:"ntfy 優先度",helpNtfy:"有効な各イベントに優先度を選択してください。ntfy はこれを使って通知の挙動（音、表示、プッシュ動作）を切り替えます。ここで設定していないレベルは ntfy サーバーのデフォルトを使用します。",min:"最小",low:"低",default:"デフォルト",high:"高",urgent:"緊急"},cancel:"キャンセル",save:"保存",add:"追加",nameRequired:"名前は必須です",fieldRequired:"{{field}}は必須です",phoneNumber:"電話番号",apiKey:"APIキー",serverUrl:"サーバーURL",topic:"トピック",authToken:"認証トークン",userKey:"ユーザーキー",appToken:"アプリトークン",priority:"優先度",botToken:"ボットトークン",chatId:"チャットID",smtpServer:"SMTPサーバー",smtpPort:"SMTPポート",security:"セキュリティ",authentication:"認証",username:"ユーザー名",password:"パスワード",fromEmail:"送信元メール",toEmail:"宛先メール",webhookUrl:"WebhookのURL",payloadFormat:"ペイロード形式",authorization:"認可",titleFieldName:"タイトルフィールド名",messageFieldName:"メッセージフィールド名",editTemplate:"テンプレートを編集: {{name}}",titleLabel:"タイトル",bodyLabel:"本文",titlePlaceholder:"通知タイトル...",bodyPlaceholder:"通知本文...",availableVariables:"利用可能な変数",clickToInsert:"クリックして本文のカーソル位置に挿入",livePreview:"ライブプレビュー",hide:"非表示",show:"表示",loadingPreview:"プレビューを読み込み中...",enterTemplateContent:"テンプレートの内容を入力するとプレビューが表示されます",titlePreview:"タイトル:",bodyPreview:"本文:",resetToDefault:"デフォルトにリセット",titleRequired:"タイトルは必須です",bodyRequired:"本文は必須です",notificationLog:"通知ログ",showFailedOnly:"失敗のみ",last24Hours:"過去24時間",last7Days:"過去7日間",last30Days:"過去30日間",last90Days:"過去90日間",justNow:"たった今",noFailedNotifications:"失敗した通知はありません",noNotificationsLogged:"記録された通知はありません",unknownProvider:"不明なプロバイダー",logTitle:"タイトル",logMessage:"メッセージ",logError:"エラー",logProvider:"プロバイダー: {{type}}",logTime:"時刻: {{time}}",refresh:"更新",clearOld:"古いものを削除",statsSummary:"過去{{days}}日間:",statsNotifications:"通知",statsSent:"{{count}}件送信",statsFailed:"{{count}}件失敗",eventTypes:{print_start:"印刷開始",print_complete:"印刷完了",print_failed:"印刷失敗",print_stopped:"印刷停止",print_progress:"進捗",printer_offline:"プリンターオフライン",printer_error:"プリンターエラー",filament_low:"フィラメント残量低下",maintenance_due:"メンテナンス期限",test:"テスト"},userEmail:{title:"通知",emailNotifications:"メール通知",emailNotificationsDesc:"自分の印刷ジョブに対してメール通知を受け取ります。メールは高度な認証で設定されたSMTP設定を使用して送信されます。",sendingTo:"通知の送信先",noEmailWarning:"アカウントにメールアドレスが設定されていません。管理者に連絡して追加してもらってください。",printJobNotifications:"印刷ジョブ通知",printJobNotificationsDesc:"送信した印刷ジョブのどのイベントでメール通知を送るかを選択します。",printJobStarts:"印刷ジョブ開始",printJobStartsDesc:"印刷ジョブが開始されたときに通知を受け取る。",printJobFinishes:"印刷ジョブ完了",printJobFinishesDesc:"印刷ジョブが正常に完了したときに通知を受け取る。",printErrors:"印刷エラー",printErrorsDesc:"印刷ジョブが失敗またはエラーが発生したときに通知を受け取る。",printJobStops:"印刷ジョブ停止",printJobStopsDesc:"印刷ジョブがキャンセルまたは停止されたときに通知を受け取る。",saveSuccess:"通知設定を保存しました。",saveError:"通知設定の保存に失敗しました。"}},richTextEditor:{bold:"太字",italic:"斜体",underline:"下線",bulletList:"箇条書きリスト",numberedList:"番号付きリスト",alignLeft:"左揃え",alignCenter:"中央揃え",alignRight:"右揃え",addLink:"リンクを追加",removeLink:"リンクを削除"},externalLinks:{noLinksConfigured:"外部リンクが設定されていません",deleteLink:"リンクを削除",removeCustomIcon:"カスタムアイコンを削除",openInNewTab:"新しいタブで開く",placeholders:{linkName:"マイリンク"}},keyboardShortcuts:{title:"キーボードショートカット",navigation:"ナビゲーション",archivesSection:"アーカイブ",kProfilesSection:"Kプロファイル",generalSection:"全般",shortcuts:{goToPrinters:"プリンターへ移動",goToArchives:"アーカイブへ移動",goToQueue:"キューへ移動",goToStats:"統計へ移動",goToProfiles:"クラウドプロファイルへ移動",goToSettings:"設定へ移動",focusSearch:"検索にフォーカス",openUploadModal:"アップロードモーダルを開く",clearSelection:"選択をクリア / 入力をぼかす",contextMenu:"カードのコンテキストメニュー",refreshProfiles:"プロファイルを更新",newProfile:"新しいプロファイル",exitSelectionMode:"選択モードを終了",showHelp:"このヘルプを表示"},footer:"Escキーを押すか外側をクリックして閉じます"},notificationLog:{title:"通知ログ",events:{printStarted:"印刷開始",printComplete:"印刷完了",printFailed:"印刷失敗",printStopped:"印刷停止",progress:"進捗",printerOffline:"プリンターオフライン",printerError:"プリンターエラー",lowFilament:"フィラメント残量低下",maintenanceDue:"メンテナンス期限",test:"テスト"},timeAgo:{justNow:"たった今",minutesAgo:"{{minutes}}分前",hoursAgo:"{{hours}}時間前"}},restoreBackup:{title:"バックアップを復元",restoring:"復元中...",restoreComplete:"復元完了",restoreFailed:"復元失敗",importSettings:"バックアップファイルから設定をインポート",pleaseWait:"データの復元中です。しばらくお待ちください",clickToSelect:"クリックしてバックアップファイルを選択（.jsonまたは.zip）",howDuplicateHandling:"重複の処理方法:",categories:{printers:"プリンター",smartPlugs:"スマートプラグ",notificationProviders:"通知プロバイダー",filaments:"フィラメント",archives:"アーカイブ",pendingUploads:"保留中のアップロード",settingsTemplates:"設定とテンプレート"},matchingInfo:{printers:"シリアル番号で照合",smartPlugs:"IPアドレスで照合",notificationProviders:"名前で照合",filaments:"名前+タイプ+ブランドで照合",archives:"コンテンツハッシュで照合",pendingUploads:"ファイル名で照合",settingsTemplates:"常に上書き"},replaceExisting:"既存データを置き換え",keepExisting:"既存データを保持",replaceDescription:"既に存在するアイテムをバックアップデータで上書き",keepDescription:"まだ存在しないアイテムのみを復元",caution:"注意:",cautionText:"上書きすると現在の構成がバックアップデータに置き換えられます。セキュリティ上の理由から、プリンターのアクセスコードは上書きされません。",itemsRestored:"復元されたアイテム",itemsSkipped:"スキップされたアイテム",restored:"復元済み",skipped:"スキップ（既に存在）",filesLabel:"ファイル（3MF、サムネイルなど）",newApiKeysGenerated:"新しいAPIキーが生成されました",newApiKeysWarning:"これらのキーは一度だけ表示されます。今すぐコピーしてください！",processingBackup:"バックアップファイルを処理中...",noDataFound:"バックアップファイルに復元するデータが見つかりませんでした。",failedToRestore:"バックアップの復元に失敗しました。ファイル形式を確認してください。"},backupExport:{title:"バックアップをエクスポート",selectData:"含めるデータを選択",selectAll:"すべて選択",selectNone:"なし",categoryDescriptions:{settings:"言語、テーマ、更新設定",notifications:"ntfy、Pushover、Discordなど",templates:"カスタムメッセージテンプレート",smartPlugs:"Tasmotaプラグ設定",externalLinks:"サイドバーの外部サービスへのリンク",printers:"プリンター情報（アクセスコード除外）",plateDetection:"空プレート参照画像",filaments:"フィラメントの種類とコスト",maintenance:"カスタムメンテナンススケジュール",archives:"すべての印刷データ+ファイル（3MF、サムネイル、写真）",projects:"プロジェクト、BOMアイテム、添付ファイル",pendingUploads:"仮想プリンターアップロード待機中",apiKeys:"Webhook APIキー（インポート時に新しいキーが生成されます）"},requiresPrinters:"プリンターを選択する必要があります",zipFileWarning:"ZIPファイルが作成されます。",zipFileDescription:"すべての3MFファイル、サムネイル、タイムラプス、写真が含まれます。これには時間がかかり、大きなファイルになる可能性があります。",includeAccessCodes:"アクセスコードを含める",includeAccessCodesDescription:"別のマシンへの転送用",includeAccessCodesWarning:"アクセスコードはプレーンテキストで含まれます。このバックアップファイルを安全に保管してください！",categoriesSelected:"{{selectedCount}}カテゴリー選択済み"},pendingUploads:{placeholders:{notes:"この印刷に関するメモを追加..."},discardUpload:"アップロードを破棄",archiveAllUploads:"すべてのアップロードをアーカイブ",discardAllUploads:"すべてのアップロードを破棄",archive:"アーカイブ",timeAgo:{justNow:"たった今",minutesAgo:"{{minutes}}分前",hoursAgo:"{{hours}}時間前",daysAgo:"{{days}}日前"}},apiBrowser:{placeholders:{requestBody:"JSONリクエストボディ...",searchEndpoints:"エンドポイントを検索..."}},configureAmsSlot:{title:"AMSスロットの設定",slotConfigured:"スロットを設定しました！",configuringSlot:"スロットを設定中：",slotLabel:"{{ams}} スロット {{slot}}",searchPresets:"プリセットを検索...",colorPlaceholder:"色名またはHex（例: 茶色、FF8800）",clearCustomColor:"カスタム色をクリア",noCloudPresets:"クラウドプリセットがありません。Bambu Cloudにログインして同期してください。",noPresetsAvailable:"プリセットがありません。Bambu Cloudにログインするか、ローカルプロファイルをインポートしてください。",noMatchingPresets:"一致するプリセットが見つかりません。",custom:"カスタム",builtin:"内蔵",settingsSentToPrinter:"設定をプリンターに送信しました",filamentProfile:"フィラメントプロファイル",kProfileLabel:"Kプロファイル（Pressure Advance）",filteringFor:"フィルター中: {{material}}",noKProfile:"Kプロファイルなし（デフォルト0.020を使用）",noMatchingKProfiles:"一致するKプロファイルが見つかりません。デフォルトK=0.020が使用されます。",selectFilamentFirst:"まずフィラメントプロファイルを選択してください",kFromCalibration:"K={{value}}（プリンターキャリブレーションから）",customColorLabel:"カスタム色（オプション）",presetColors:"{{name}}の色：",showLessColors:"色を減らす",showMoreColors:"色をもっと表示",clear:"クリア",hexLabel:"16進: #{{hex}}",resetting:"リセット中...",resetSlot:"スロットをリセット",cancel:"キャンセル",configuring:"設定中...",configureSlot:"スロットを設定"},githubBackup:{title:"Gitバックアップ",history:"履歴",downloadBackup:"バックアップをダウンロード",restoreBackup:"バックアップを復元",noBackupsYet:"バックアップはまだありません"},emailSettings:{placeholders:{fromName:"Bambuddy"}},tagManagement:{searchTags:"タグを検索...",renameTag:"タグ名を変更",deleteTag:"タグを削除"},notificationTemplates:{placeholders:{title:"通知タイトル...",body:"通知本文..."}},batchTag:{placeholders:{newTag:"新しいタグを入力..."}},photoGallery:{deletePhoto:"写真を削除"},filamentHoverCard:{copySpoolUuid:"スプールUUIDをコピー"},kProfilesView:{hasNote:"メモあり",copyProfile:"プロファイルをコピー"},layout:{openMenu:"メニューを開く",noPermissionSystemInfo:"システム情報を表示する権限がありません"},dashboard:{dragToReorder:"ドラッグして並べ替え",hideWidget:"ウィジェットを非表示"},notificationProviderCard:{deleteNotificationProvider:"通知プロバイダーを削除"},fileManagerModal:{closeFileManager:"ファイルマネージャーを閉じる",sortFiles:"ファイルを並べ替え",goToParentFolder:"親フォルダーへ移動",threeView:"3Dビュー"},embeddedCameraViewer:{refreshStream:"ストリームを更新",close:"閉じる",zoomOut:"ズームアウト",resetZoom:"ズームをリセット",zoomIn:"ズームイン",dragToResize:"ドラッグしてサイズ変更"},timelapseViewer:{skipBack5s:"5秒戻る",skipForward5s:"5秒進む"},notificationProviders:{descriptions:{email:"SMTP電子メール通知",telegram:"Telegramボット経由の通知",discord:"Webhookを介してDiscordチャンネルに送信",ntfy:"無料でセルフホスト可能なプッシュ通知",pushover:"シンプルで信頼性の高いプッシュ通知",callmebot:"CallMeBot経由の無料WhatsApp通知",webhook:"任意のURLへのジェネリックHTTP POST"}},logViewer:{searchPlaceholder:"メッセージまたはロガー名を検索...",noLogEntries:"ログエントリが見つかりません"},switchbarPopover:{noSwitchesInSwitchbar:"スイッチバーにスイッチがありません"},projectPageModal:{placeholders:{title:"タイトル",designer:"デザイナー",license:"ライセンス",description:"説明を入力...",profileTitle:"プロファイルタイトル",profileDescription:"プロファイルの説明..."}},spoolmanSettings:{},time:{unknown:"-",waiting:"待機中",justNow:"たった今",now:"今すぐ",minsAgo:"{{count}}分前",inMins:"あと{{count}}分",hoursAgo:"{{count}}時間前",inHours:"あと{{count}}時間",daysAgo:"{{count}}日前",inDays:"あと{{count}}日"},spoolbuddy:{nav:{dashboard:"ダッシュボード",ams:"AMS",inventory:"インベントリ",writeTag:"書込み",settings:"設定"},status:{nfcReady:"NFC準備完了",nfcOff:"NFCオフ",offline:"オフライン",online:"オンライン",noPrinters:"プリンターなし",deviceOffline:"デバイスオフライン",waitingConnection:"デバイス接続を待っています...",systemReady:"システム準備完了",status:"ステータス"},dashboard:{readyToScan:"スキャン準備完了",idleMessage:"スプールを計量台に置いて識別します",nfcHint:"NFCタグは自動的に読み取られます",device:"デバイス",syncWeight:"重量同期",weightSynced:"同期完了！",unknownTag:"不明なタグ",newTag:"新しいタグを検出",onScale:"計量中",linkSpool:"スプールにリンク",linkTagTitle:"タグをスプールにリンク",linkTag:"タグをリンク",selectSpool:"このタグにリンクするスプールを選択:",noUntagged:"タグなしのスプールが見つかりません",tagDetected:"タグ検出",noTag:"タグなし",tagId:"タグ",grossWeight:"総重量",spoolSize:"スプールサイズ",close:"閉じる",currentSpool:"現在のスプール",plateReady:"プレート準備完了: {{name}}",plateReadyLabel:"片付け待ちプレート",plateClearAction:"片付け",plateClearedToast:"プレートを片付け済みにしました",plateClearFailed:"プレートを片付け済みにできませんでした"},modal:{spoolDetected:"スプール検出",assignToAms:"AMSに割り当て",syncWeight:"重量同期",weightSynced:"同期完了！",syncing:"同期中...",newTagDetected:"新しいタグを検出",addToInventory:"インベントリに追加",assignToAmsTitle:"AMSに割り当て",selectSlot:"スロットを選択",assign:"割り当て",assigning:"割り当て中...",assignSuccess:"割り当て完了！",assignPendingInsert:"割り当てました。スプールを挿入したときにスロットが設定されます。",assignError:"スプールの割り当てに失敗しました。再試行してください。",noPrinterSelected:"プリンターを選択...",noAmsDetected:"このプリンターにAMSが検出されません",slot:"スロット"},weight:{noReading:"読み取りなし",stable:"安定",measuring:"計測中...",tare:"風袋引き",calibrate:"キャリブレーション"},spool:{remaining:"残量",material:"素材",brand:"ブランド",color:"色",coreWeight:"コア",labelWeight:"ラベル",scaleWeight:"計量",netWeight:"正味",lastUsed:"最終使用"},ams:{noData:"AMSが検出されません",connectAms:"AMSを接続してスロットを表示",noPrinter:"プリンター未選択",selectPrinter:"上部バーからプリンターを選択",printerDisconnected:"プリンター切断",humidity:"湿度",level:"レベル",active:"アクティブ",slot:"スロット",empty:"空"},inventory:{search:"スプールを検索...",empty:"インベントリにスプールがありません",noResults:"一致するスプールがありません",spools:"スプール",addSpool:"スプール追加"},settings:{tabDevice:"デバイス",tabDisplay:"ディスプレイ",tabScale:"計量",tabUpdates:"アップデート",nfcReader:"NFCリーダー",type:"タイプ",connection:"接続",notConnected:"該当なし",deviceInfo:"デバイス情報",hostname:"ホスト",uptime:"稼働時間",brightness:"明るさ",saved:"保存済み",noBacklight:"DSIバックライトが検出されませんでした。明るさ制御にはDSIディスプレイが必要です。",screenBlank:"画面オフタイムアウト",screenBlankDesc:"操作がないと画面がオフになります。タッチで復帰。",displayNote:"明るさはソフトウェアフィルターとして適用されます。",scaleCalibration:"計量キャリブレーション",currentWeight:"現在の重量",tareOffset:"風袋",calFactor:"係数",knownWeight:"既知の重量",calStep1:"計量台からすべてのアイテムを取り除き、ゼロ設定を押してください。",calStep2:"既知の重量を計量台に置いてください。",setZero:"ゼロ設定",calibrateNow:"キャリブレーション",calibrated:"キャリブレーション済み",tareSet:"風袋コマンドを送信しました。デバイスを待っています...",tareComplete:"風袋が完了しました！",tareTimedOut:"風袋がタイムアウトしました — SpoolBuddy デーモンは起動していますか？",tareFailed:"風袋コマンドの送信に失敗しました",zeroSet:"ゼロ点を設定しました。既知の重量を計量台に置いてください。",calibrationDone:"キャリブレーション完了！",calibrationFailed:"キャリブレーションに失敗しました",lastCalibrated:"最終キャリブレーション",stable:"安定",settling:"安定化中...",firmware:"ファームウェア",scale:"計量",noDevice:"SpoolBuddyデバイスが見つかりません",daemonVersion:"デーモンバージョン",currentVersion:"現在",versionPending:"デーモンを待っています...",checking:"確認中...",checkUpdates:"アップデートを確認",updateAvailable:"アップデートあり",updateInstructions:"SSH経由で更新：SpoolBuddyインストールスクリプトを実行してください。",upToDate:"最新です",includeBeta:"ベータ版を含む",systemConfig:"バックエンドと認証",backendUrl:"BambuddyバックエンドURL",apiToken:"APIトークン",apiTokenPlaceholder:"APIトークンを入力",saveConfig:"設定を保存",systemQueued:"設定をキューに追加しました。",systemFieldsRequired:"バックエンドURLは必須です。",nfcDiagnostic:"NFC診断",scaleDiagnostic:"スケール診断",readTagDiagnostic:"タグ読み取り診断",testNfc:"リーダーをテスト",testScale:"精度をテスト",testReadTag:"タグを読み取り"},writeTag:{tabExisting:"既存のスプール",tabNew:"新規スプール",tabReplace:"タグ交換",searchPlaceholder:"素材、色、ブランドで検索...",noUntaggedSpools:"タグなしのスプールがありません",noTaggedSpools:"タグ付きのスプールがありません",selectSpool:"スプールを選択し、NTAGをリーダーに置いてください",placeTag:"NTAGをリーダーに置いてください",tagReady:"タグ検出 — 書込み準備完了",writeTag:"タグ書込み",replaceTag:"タグ交換",writing:"タグ書込み中...",waiting:"SpoolBuddyを待機中...",writeSuccess:"タグの書込みが完了しました！",writeFailed:"書込み失敗",queueFailed:"書込みコマンドのキューに失敗しました",tryAgain:"再試行",cancel:"キャンセル",replaceWarning:"古いタグのリンクが解除され、新しいタグに置き換わります。",deviceOffline:"SpoolBuddyはオフラインです",material:"素材",colorName:"色名",color:"色",brand:"ブランド",weight:"重量 (g)",createSpool:"スプール作成",creating:"作成中...",spoolCreated:"スプール作成完了！書込み準備ができました。",createFailed:"スプールの作成に失敗しました",incompleteDataWarning:"不完全なSpoolmanデータでタグを書き込みました"},quickMenu:{printerPower:"プリンター電源",systemControls:"システム",restartDaemon:"デーモン再起動",restartBrowser:"ブラウザ再起動",reboot:"再起動",shutdown:"シャットダウン",swipeToClose:"下にスワイプして閉じる",confirmTitle:"確認",confirmShutdown:"SpoolBuddyをシャットダウンしますか？再起動するには物理的なアクセスが必要です。",confirmReboot:"SpoolBuddyを再起動しますか？",confirmRestartDaemon:"SpoolBuddyデーモンを再起動しますか？NFCとスケールが一時的に使用できなくなります。",confirmRestartBrowser:"キオスクブラウザを再起動しますか？画面が一時的に暗くなります。",confirm:"確認",confirmPlugOn:"{{name}}をオンにしますか？",confirmPlugOff:"{{name}}をオフにしますか？",turnOn:"オン",turnOff:"オフ"}},diagnostic:{modalTitle:"接続診断 — {{name}}",running:"診断を実行中...",runningElapsed:"診断を実行中... ({{elapsed}}秒)",waitingForReportHint:"プリンターがステータスレポートを送信するのを待っています — 最大 {{max}} 秒かかる場合があります。",runFailed:"診断を実行できませんでした: {{error}}",retry:"再実行",runButton:"診断を実行",sectionTitle:"接続診断",sectionDescription:"プリンターが接続できない、または印刷できない原因を確認します — ポートの到達性、LAN開発者モード、Dockerネットワークモード、認証情報。",noPrinters:"プリンターが設定されていません。",overall:{ok:"問題は見つかりませんでした — プリンター接続は正常のようです。",warnings:"プリンターは動作するはずですが、いくつかの点に注意が必要です。",problems:"プリンターが接続できない、または印刷できない原因となる問題が見つかりました。"},check:{port_mqtt:{title:"制御ポート (MQTT 8883)",pass:"到達可能 — プリンターは制御接続を受け付けています。",fail:"ポート8883に到達できません。プリンターの電源が切れている、IPアドレスが異なる、またはファイアウォールがブロックしています。プリンターのIPと、ポート8883が何にもブロックされていないことを確認してください。"},port_ftps:{title:"ファイル転送ポート (FTPS 990)",pass:"到達可能 — 印刷ファイルの送信は機能します。",warn:"ポート990に到達できません。監視は引き続き機能する場合がありますが、プリンターへの印刷送信は失敗します。ポート990がブロックされていないことを確認してください。"},port_rtsps:{title:"カメラポート (RTSPS 322)",pass:"到達可能 — カメラストリームは機能します。",warn:"ポート322に到達できません。ライブカメラ表示は機能しません。これは印刷には影響しません。"},network_mode:{title:"Dockerネットワークモード",pass:"ホストネットワークモードで実行中です。",warn:'BambuddyはDockerブリッジネットワークで実行されています。プリンター検出と仮想プリンターにはホストネットワークモードが必要です — "network_mode: host" でコンテナを再作成してください。',skip:"Dockerで実行されていません — 該当しません。"},subnet:{title:"ネットワークサブネット",pass:"プリンターとBambuddyは同じサブネットにあります。",warn:"プリンター ({{printer_ip}}) とBambuddy ({{host_ip}}) は異なるサブネットにあります。サブネット間のルーティングが設定されていない限り、互いに到達できない可能性があります。",skip:"サブネットを判定できませんでした — スキップしました。"},mqtt_auth:{title:"プリンター認証情報",pass:"プリンターが接続を受け入れました。",fail:"プリンターには到達できますが、接続を拒否されました。アクセスコードまたはシリアル番号が間違っている可能性が高いです。アクセスコードは開発者モードを切り替えるたびに変わります — プリンター画面から再度コピーしてください。",skip:"未確認 — プリンターに到達できませんでした。"},developer_mode:{title:"LAN開発者モード",pass:"開発者モードは有効です。",fail:"プリンターの開発者モードがオフです。プリンターのLAN設定で有効にし、OKで確定してください。これがないと印刷は開始されません。",skip:"確認できませんでした — プリンターへのアクティブな接続が必要です。"},printer_publishing:{title:"プリンターがステータスを送信中",pass:"プリンターはステータス更新を送信しています — AMS、フィラメント、Kプロファイルがスライサーに正しくミラーされます。",fail:"MQTTブローカーは接続を受け付けましたが、プリンターはステータスレポートを一切送信していません。ほぼ常にシリアル番号の誤りまたは大文字小文字の不一致が原因です — device/<serial>/report トピックは大文字小文字を区別します。プリンター設定のシリアル番号をプリンター本体の画面表示と照合してください。",skip:"確認できませんでした — プリンターへのアクティブな接続が必要です。"}}},systemHealth:{sectionTitle:"システムの状態",sectionDescription:"最近のログから既知の問題を検出します。サポートに問い合わせる前に、多くは自分で解決できます。",rescan:"再スキャン",clean:"直近 {{times}} 件のログに既知の問題は見つかりませんでした。",logUnavailable:"ファイルへのログ記録が無効になっているため、ログをスキャンできません。このチェックを使うにはファイルログを有効にしてください。",learnMore:"対処方法",fixLabel:"対処:",occurrences:"{{times}} 回発生 — 最終 {{lastSeen}}",category:{layer8:"自分で解決できます",environment:"環境",bug:"報告してください"},signature:{"ftp-auth-rejected":{name:"プリンターがアクセスコードを拒否しました",cause:"プリンターがファイル転送のログインを拒否しました。アクセスコードが間違っているか、開発者モードの切り替え後に変更されています。",fix:"プリンター画面（LAN設定）からアクセスコードをコピーし直し、Bambuddy のプリンター設定で更新してください。"},"ftp-connection-timeout":{name:"ファイル転送の接続がタイムアウトしました",cause:"Bambuddy がプリンターのファイル転送ポート（FTPS 990）に到達できませんでした。ポートがブロックされているか、プリンターの電源が切れているか、別のサブネットにあります。",fix:"Bambuddy とプリンターの間でポート 990 がブロックされていないこと、両者が同じネットワークにあることを確認してください。"},"ftp-ssl-error":{name:"セキュアなファイル転送のハンドシェイクに失敗しました",cause:"プリンターのファイル転送サーバーとの TLS ハンドシェイクに失敗しました。多くはファイアウォールか、プリンターのファームウェアが古いことが原因です。",fix:"プリンターのファームウェアを更新し、ファイアウォールやプロキシがポート 990 の接続を妨げていないか確認してください。"},"mqtt-connection-flapping":{name:"プリンター接続が繰り返し切断されます",cause:"制御接続（MQTT 8883）が切断と再接続を繰り返しています。通常はネットワークが弱いか、ポートが部分的にブロックされていることが原因です。",fix:"プリンター付近の Wi-Fi 信号を確認し、できれば有線接続を使用し、ポート 8883 が安定して到達できることを確認してください。"},"camera-connection-refused":{name:"カメラ映像に接続できません",cause:"ポート RTSPS 322 でライブカメラに到達できませんでした。ポートがブロックされているか、プリンターのカメラまたは LAN ライブビューが無効になっています。",fix:"プリンターのカメラと LAN ライブビューを有効にし、ポート 322 がブロックされていないか確認してください。これは印刷には影響しません。"},"database-locked":{name:"データベースの書き込み競合",cause:'負荷時に SQLite データベースで "database is locked" エラーが発生しています。複数のプリンターを同時に使用する場合によく起こります。',fix:"Bambuddy を外部の PostgreSQL データベースに切り替えてください。ドキュメントの PostgreSQL ガイドを参照してください。"}}},vpDiagnostic:{title:"セットアップチェック — {{name}}",runButton:"セットアップチェックを実行",running:"セットアップチェックを実行中...",runFailed:"セットアップチェックを実行できませんでした: {{error}}",retry:"再実行",overall:{ok:"すべてのチェックに合格しました — この仮想プリンターは正しく設定されています。",warnings:"仮想プリンターは動作するはずですが、いくつかの点に注意が必要です。",problems:"スライサーがこの仮想プリンターを認識または使用できない理由となる問題が見つかりました。"},check:{enabled:{title:"仮想プリンターが有効",fail:"この仮想プリンターはオフです。検出可能にするにはオンに切り替えてください。"},running:{title:"サービスが稼働中",fail:"仮想プリンターは有効ですが、サービスが稼働していません。Bambuddy のログを確認してください — 通常はバインド IP の競合または権限エラーが原因で停止します。"},bind_interface:{title:"バインドネットワークインターフェース",fail:"バインドインターフェースが設定されていないか、このホストに存在しなくなっています。「バインドインターフェース」のドロップダウンから現在のインターフェースを選択してください。"},access_code:{title:"アクセスコードが設定済み",fail:"アクセスコードが設定されていません。ここで設定したものと同じ 8 文字のアクセスコードをスライサーに入力する必要があります。"},target_printer:{title:"ターゲットプリンター",fail:"ターゲットプリンターが選択されていません。プロキシモードには転送先となる実際のプリンターが必要です。",warn:"ターゲットプリンターは現在オフラインです — 再接続されると転送が再開されます。"},port_ftps:{title:"ファイルアップロードサービス（ポート {{port}}）",fail:"バインド IP のポート {{port}} で待ち受けているものがないため、スライサーはファイルをアップロードできません。通常はこのインターフェースでのポート競合が原因です。"},port_mqtt:{title:"制御サービス（ポート {{port}}）",fail:"バインド IP のポート {{port}} で待ち受けているものがないため、スライサーは接続もステータス表示もできません。"},port_bind:{title:"検出サービス（ポート {{port}}）",fail:"バインド IP のポート {{port}} で待ち受けているものがないため、スライサーの検出ハンドシェイクが失敗します。"},certificate:{title:"TLS 証明書",pass:"証明書の準備ができています。Bambuddy CA 証明書（上記）がスライサーの信頼ストアにインポートされていることを確認してください。",fail:"この仮想プリンターの TLS 証明書がありません。Bambuddy のデータディレクトリが書き込み可能か確認してください。"}}},bugReport:{logHealthSummary:"ログから既知の問題が見つかりました",logHealthIntro:"最近のログが既知の問題と一致しています。下記の対処方法をご確認ください。解決すればバグ報告なしで問題が解消する可能性があります。下からバグ報告を送ることもできます。",title:"バグを報告",description:"説明",descriptionPlaceholder:"何が問題でしたか？問題を説明してください...",email:"メールアドレス（任意）",emailPlaceholder:"your@email.com",emailPrivacy:"入力された場合、メールアドレスはGitHub Issueの折りたたみセクションに含まれ、メンテナーがフォローアップできるようになります。",screenshot:"スクリーンショット",uploadOrPaste:"画像をアップロード、貼り付け、またはドラッグ",dataCollectedSummary:"レポートに含まれるデータは？",dataIncluded:"含まれるもの:",dataIncludedList:"アプリバージョン、OS、アーキテクチャ、Pythonバージョン、データベース統計（件数のみ）、プリンターモデル、ノズル数、ファームウェアバージョン、接続状態、統合状態（Spoolman、MQTT、HA）、非機密設定、ネットワークインターフェース数、Docker詳細、依存関係バージョン。",dataNeverIncluded:"含まれないもの:",dataNeverIncludedList:"プリンター名、シリアル番号、アクセスコード、パスワード、IPアドレス、メールアドレス、APIキー、トークン、Webhook URL、ホスト名、ユーザー名。",submit:"送信",startLogging:"デバッグログ開始",stepEnableLogging:"デバッグログ有効",stepReproduce:"問題を再現してください",stepStopLogging:"停止してレポート送信",stopAndSubmit:"停止して送信",maxDuration:"{{minutes}}分後に自動停止",stoppingLogs:"ログ収集・送信中...",submitting:"バグレポートを送信中...",submittingStepConnection:"プリンターの接続確認を実行中",submittingStepVirtualPrinters:"仮想プリンターのセットアップ確認を実行中",submittingStepLogScan:"最近のログから既知の問題をスキャン中",submittingStepSubmit:"GitHub にレポートを送信中",submitSuccess:"バグレポートが正常に送信されました！",submitFailed:"バグレポートの送信に失敗しました",diagnosticChecking:"プリンター接続を確認中...",diagnosticHealthy:"接続チェックに合格しました — プリンターに問題は見つかりませんでした。",diagnosticSummary:"{{total}} 台中 {{problems}} 台のプリンターに接続の問題があります",diagnosticIntro:"1 台以上のプリンターに接続の問題があり、それが今回の問題の原因である可能性があります。下記のプリンターを展開して対処法を確認してください — それを解決すれば、バグ報告なしで問題が解決するかもしれません。下記から報告を送信することもできます。",thankYou:"ありがとうございます！",submitted:"バグレポートが送信されました。",viewIssue:"Issueを表示",unexpectedError:"予期しないエラーが発生しました"},failureDetection:{title:"AI 失敗検出",description:"セルフホストされた Obico ML API で印刷を監視し、検出された失敗に自動的に対応します。",mlUrl:"Obico ML API の URL",mlUrlHint:"セルフホストした Obico ml_api コンテナのベース URL (例: http://192.168.1.10:3333)。",test:"テスト",testSuccess:"ML API に接続でき、正常です。",testFailed:"ML API に接続できませんでした。",sensitivity:"感度",sensitivityLow:"低(誤検出が少ない)",sensitivityMedium:"中(バランス型)",sensitivityHigh:"高(早期検出、誤検出が増加)",sensitivityHint:"警告と失敗をトリガーする信頼度のしきい値を調整します。",action:"失敗検出時の動作",actionNotify:"通知のみ",actionPause:"印刷を一時停止",actionPauseOff:"一時停止して電源を切る",pollInterval:"ポーリング間隔(秒)",pollIntervalHint:"印刷中に各プリンターをチェックする頻度。最小 5 秒、最大 120 秒。",externalUrlMissing:"外部URLが設定されていません。",externalUrlHint:"ML APIはURLでカメラスナップショットを取得します。MLAPIコンテナがBambuddyに到達できるよう、一般設定で外部URLを設定してください。",perPrinterTitle:"監視対象プリンター",perPrinterHint:"検出サービスが監視するプリンターを選択します。",monitorAll:"接続されているすべてのプリンターを監視",statusTitle:"ステータス",serviceRunning:"サービス稼働中",thresholds:"低 / 高しきい値",activePrinters:"アクティブな印刷",noActivePrints:"現在、実行中の印刷はありません。",historyTitle:"最近の検出",noHistory:"まだ検出はありません。"},makerworld:{title:"MakerWorld",description:"MakerWorld モデルの URL を貼り付けると、Bambu Handy アプリを開かなくても Bambuddy から直接インポート・印刷できます。",pasteUrlHeader:"MakerWorld からインポート",pasteUrlPlaceholder:"https://makerworld.com/en/models/… または任意の MakerWorld リンク",resolveButton:"読み込む",signInRequiredTitle:"ダウンロードには Bambu Cloud へのサインインが必要です",signInRequiredBody:"モデルの詳細は匿名で閲覧できますが、3MF ファイルをダウンロードするには Bambu Cloud アカウントが必要です。",openCloudSettings:"Cloud 設定を開く",untitledModel:"無題のモデル",byCreator:"作成者: {{name}}",downloadsCount:"ダウンロード数: {{count}}",licensePrefix:"ライセンス",alreadyImported:"ライブラリに登録済み",openOnMakerworld:"MakerWorld で開く",alreadyInLibrary:"このモデルはすでにライブラリにあります — ファイルマネージャー → MakerWorld で確認できます",importSuccess:"{{filename}} をインポートしました — ファイルマネージャー → MakerWorld に保存済み",platesHeader:"プレート ({{count}})",plateDefaultName:"プレート {{n}}",materialCount:"フィラメント {{count}} 本",amsRequired:"AMS が必要",slicedFor:"{{printer}}用にスライス済み",alsoCompatible:"互換性ありとも記録: {{printers}}",importToLibrary:"保存",sliceIn:"保存して {{slicer}} でスライス",disclaimer:"MakerWorld 連携はコミュニティで文書化された API エンドポイントを使用しています。Bambuddy は MakerWorld または Bambu Lab との提携・承認関係はありません。",lastImportSuccess:"ライブラリにインポートしました",lastImportAlreadyInLibrary:"既にライブラリに存在します",viewInLibrary:"ファイルマネージャーで表示",openInBambuStudio:"Bambu Studio で開く",openInOrcaSlicer:"OrcaSlicer で開く",importTo:"ファイルマネージャーへのインポート先",recentImportsHeader:"最近のインポート",phaseResolving:"解決中",phaseDownloading:"ダウンロード中",folderAuto:"MakerWorld (デフォルト)",importAll:"すべてインポート",importAllProgress:"インポート中 {{current}}/{{total}}",openGallery:"画像ギャラリーを開く",galleryPrev:"前の画像",galleryNext:"次の画像",deleteImport:"ライブラリから削除",importDeleting:"削除中…",importDeleted:"ライブラリから削除しました",confirmDelete:"{{filename}} をライブラリから削除しますか？ローカルファイルは削除されますが、MakerWorld から再インポートできます。",errors:{resolveFailed:"この MakerWorld URL を解決できませんでした。",downloadFailed:"ダウンロードに失敗しました。もう一度お試しください。",deleteFailed:"ライブラリからファイルを削除できませんでした。"}},gcodeViewer:{back:"戻る",backToArchives:"印刷アーカイブに戻る",backToFiles:"ファイル管理に戻る"},libraryTrash:{title:"ゴミ箱",headerButton:"ゴミ箱",headerTooltip:"ゴミ箱に移動したファイルを表示",backToFiles:"ファイルマネージャーに戻る",subtitleAdmin:"削除されたファイルは {{days}} 日間ゴミ箱に残り、その後自動的に削除されます。このビューには全ユーザーのゴミ箱が表示されます。",subtitleUser:"削除されたファイルは {{days}} 日間ゴミ箱に残り、その後自動的に削除されます。",loading:"ゴミ箱を読み込み中…",loadError:"ゴミ箱を読み込めませんでした。",empty:"ゴミ箱は空です。",summary:"{{count}} 件 · {{size}}",emptyTrash:"ゴミ箱を空にする",restore:"復元",purgeNow:"今すぐ削除",autoPurgeIn:"{{when}} に自動削除",days:"日",retentionLabel:"自動削除までの期間",selectAll:"すべて選択",selectOne:"{{filename}} を選択",selectionCount:"{{count}} 件選択中",bulkRestore:"選択したものを復元",bulkPurge:"選択したものを削除",col:{filename:"ファイル",folder:"フォルダ",size:"サイズ",deleted:"ゴミ箱に移動",autoPurge:"自動削除",owner:"所有者",actions:"操作"},confirm:{purgeTitle:"完全に削除しますか？",purgeBody:"{{filename}} はディスクから削除され、復元できません。",emptyTitle:"ゴミ箱を空にしますか？",emptyBody:"{{count}} 件のファイルすべてがディスクから削除されます。この操作は取り消せません。",bulkPurgeTitle:"選択したファイルを完全に削除しますか？",bulkPurgeBody:"選択した {{count}} 件のファイルがディスクから削除され、復元できません。",cta:"完全に削除"},toast:{restored:"ファイルを復元しました。",restoreFailed:"ファイルを復元できませんでした。",purged:"ファイルを完全に削除しました。",purgeFailed:"ファイルを削除できませんでした。",emptied:"ゴミ箱から {{count}} 件のファイルを削除しました。",emptyFailed:"ゴミ箱を空にできませんでした。",retentionSaved:"自動削除を {{days}} 日に設定しました。",retentionFailed:"保持期間の設定を保存できませんでした。",bulkRestored:"{{count}} 件のファイルを復元しました。",bulkPurged:"{{count}} 件のファイルを削除しました。"}},libraryPurge:{title:"古いファイルを一括削除",headerButton:"古いファイル削除",headerTooltip:"古いファイルをまとめてゴミ箱に移動",description:"指定した期間より古いファイルはゴミ箱に移動されます。外部フォルダはスキップされます。自動削除までの間、ゴミ箱から復元できます。",ageLabel:"次より古いファイルを移動",days:"日",includeNeverPrinted:"一度も印刷していないファイルも含める",effectsTitle:"「削除」をクリックすると何が起こるか",effect1:"一致するファイルはゴミ箱に移動されます。ディスクからはまだ削除されません。",effect2:"保持期間が過ぎるまで、いつでもゴミ箱から復元できます。",effect3:"保持期間が過ぎると、ゴミ箱クリーナーがディスクから完全に削除します。",effect4:"外部（リンク済み）フォルダー内のファイルはスキップされます — Bambuddyは所有していないバイトを削除しません。",previewLoading:"対象ファイル数を確認中…",previewFailed:"プレビューを取得できませんでした。",previewSummary:"{{count}} 件 · {{size}} がゴミ箱に移動されます",andMore:"…ほか {{count}} 件",warning:"ファイルはソフト削除されます — 保持期間が終了するまでゴミ箱から復元できます。",confirmCta:"{{count}} 件をゴミ箱へ移動",purging:"ゴミ箱へ移動中…",toast:{success:"{{count}} 件のファイルをゴミ箱に移動しました。",failed:"ファイルを削除できませんでした。"}},libraryAutoPurge:{enableLabel:"古いファイルを自動で一括削除",enableDescription:"管理者の一括削除を 1 日 1 回実行します。ファイルはまずゴミ箱に移動され、すぐには削除されません。",ageLabel:"次より古いファイルを自動削除",ageDescription:"最短 7 日、最長 10 年。手動の「古いファイル削除」ボタンと同じ期間ルールを使用します。",days:"日",includeNeverPrinted:"一度も印刷していないファイルも含める",saveFailed:"自動削除の設定を保存できませんでした。"},archivePurge:{headerButton:"古いものを削除",headerTooltip:"古いアーカイブを一括削除",title:"古いアーカイブを削除",description:"古い印刷履歴をクリア。各アーカイブは最新の印刷完了に基づいてエイジングされます — アーカイブを再印刷するとエイジがリセットされるため、現在使用中の作業が削除されることはありません。",ageLabel:"印刷されていないアーカイブを削除（過去",days:"日",effectsTitle:"「削除」をクリックすると何が起こるか",effect1:"一致するアーカイブはリストから非表示になり、ファイル（3MF、サムネイル、タイムラプス、ソース3MF、F3D、写真）はディスクから削除されます。",effect2:"アーカイブのレコードはデータベースに残るため、Quick Stats のフィラメント／時間／コスト／エネルギーの寄与は保持されます — 個別アーカイブ削除の既定動作と同じです。",effect3:"下の「統計からも削除」を有効にすると、Quick Stats の寄与も破棄されます（個別アーカイブ削除のオプションと同等）。この操作は取り消せません。",effect4:"アーカイブを再印刷するとエイジクロックがリセットされるため、まだ使用中のアーカイブは安全です。",purgeStatsLabel:"統計からも削除",purgeStatsHint:"一致するアーカイブを Quick Stats（フィラメント、時間、コスト、エネルギー）からも削除します。チェックしない場合、Quick Stats は寄与を保持し、ファイルのみがディスクから消えます。",previewLoading:"一致するアーカイブの数を確認中…",previewFailed:"削除のプレビューを表示できませんでした。",previewSummary:"{{count}}件のアーカイブ · {{size}}が削除されます",andMore:"…他に{{count}}件",warning:"ファイルはディスクから削除され、元に戻せません。続行する前に、保持したいものをダウンロードまたはお気に入りに追加してください。",confirmCta:"{{count}}件のアーカイブを削除",purging:"削除中…",toast:{success:"{{count}}件のアーカイブを削除しました。",failed:"アーカイブを削除できませんでした。"}},archiveAutoPurge:{enableLabel:"古いアーカイブを自動削除",enableDescription:"1日1回、しきい値内に印刷されていないアーカイブをリストから非表示にし、ファイルをディスクから削除します。再印刷するとタイマーがリセットされます。",ageLabel:"印刷されていないアーカイブを自動削除（過去",ageDescription:"最小7日、最大10年。最新の印刷完了に基づきます — 再印刷するとエイジがリセットされます。3MF、サムネイル、タイムラプス、ソース3MF、F3D、写真を削除します。",days:"日",purgeStatsLabel:"統計からも削除",purgeStatsDescription:"有効にすると、毎日のスイーパーが削除した各アーカイブを Quick Stats（フィラメント、時間、コスト、エネルギー）からも除外します。既定はオフ — Quick Stats は寄与を保持し、ファイルのみがディスクから消えます。",runNow:"アーカイブを今すぐ削除",saveFailed:"自動削除設定を保存できませんでした。"},cameraTokens:{title:"カメラAPIトークン",navTitle:"カメラAPIトークン",description:"Home Assistant、Frigate、キオスク、その他安定したURLが必要なツールにカメラストリームを埋め込むための長期トークン。各トークンはカメラストリーム専用で、いつでも取り消し可能。",loading:"読み込み中…",confirmRevoke:{title:"このトークンを取り消しますか？",body:"「{{name}}」を使用しているデバイスは直ちにアクセスできなくなります。元に戻せません。",cancel:"キャンセル",confirm:"取り消し"},create:{title:"新しいトークンを作成",nameLabel:"トークン名",namePlaceholder:"例：Home Assistant",daysLabel:"有効期限までの日数",submit:"作成",hint:"最大有効期間は365日。トークン値は作成時に一度だけ表示されます — 今すぐコピーしてください。"},created:{title:"トークンを作成しました – 今すぐコピー",warning:"このトークンが表示されるのは今回限りです。このダイアログを閉じると二度と表示できません。",copy:"コピー",dismiss:"保存しました"},list:{myTitle:"マイトークン",allTitle:"全ユーザー（管理者ビュー）",empty:"トークンはまだありません。",name:"名前",owner:"所有者",prefix:"プレフィックス",created:"作成",expires:"有効期限",lastUsed:"最終使用",revoke:"取り消し",expired:"期限切れ"},toast:{created:"トークンを作成しました",createFailed:"トークンの作成に失敗",revoked:"トークンを取り消しました",revokeFailed:"トークンの取り消しに失敗",loadFailed:"トークンの読み込みに失敗",copied:"クリップボードにコピー",copyFailed:"コピーに失敗 – 手動で選択してコピー"}},forecast:{title:"在庫予測",noSpools:"アクティブなスプールが見つかりません。予測データを表示するには、在庫にスプールを追加してください。",noUsageData:"使用データがありません — 在庫のタイムラインを予測できません。",sku:"SKU",material:"素材",stock:"在庫",dailyRate:"レート",daysLeft:"残り日数",emptyBy:"在庫切れ予定日",reorderBy:"発注期限",actions:"操作",trend:"トレンド",estimated:"推定",noData:"データなし",timeframe:"期間",chartTitle:"在庫予測 — 上位5素材",dashedLinesROP:"破線 = 発注点",stockLevel:"在庫量",reorderPoint:"発注点",safetyMargin:"安全余裕",trendLegend:"トレンド（履歴ベース、95%サービスレベル）",estimatedLegend:"推定（重量差分）",noDataLegend:"データなし",ropLabel:"発注点",ssLabel:"安全在庫",safetyStockLegend:"安全在庫",stockArrivalLegend:"入荷",stockoutLegend:"品切れ",alertCount_one:"{{count}}件の警告",alertCount_other:"{{count}}件の警告",order:"注文",globalLeadTime:"グローバルリードタイム",globalLeadTimeHint:"グローバルリードタイムの下限 — 全SKUの発注点計算に使用",save:"保存",cancel:"キャンセル",settingsSaved:"設定を保存しました",failedSaveSettings:"設定の保存に失敗しました",globalLeadTimeSaved:"グローバルリードタイムを保存しました",skuLeadTimeOverride:"SKUリードタイム上書き",skuLeadTimeHint:"0 = グローバルリードタイムを使用。このSKUを上書きするには0より大きい値を設定。",safetyMarginLabel:"安全余裕",effectiveLeadTime:"実効リードタイム",effectiveLeadTimeHint:"max(グローバル {{global}}日, SKU {{sku}}日)",reorderPointHint:"d̄ × LT + safety margin — 在庫がこのレベルに達したら発注",safetyMarginHint:"統計的安全在庫 (z=1.65 × σ × √LT) + ユーザー定義バッファ",safetyMarginHintDays:"統計的安全在庫に加算されるバッファ。{{approx}}",safetyMarginHintDaysApprox:" ≈ 現在のペースで{{g}}g。",safetyMarginHintG:"統計的安全在庫に加算される固定重量バッファ。{{approx}}",safetyMarginHintGApprox:" ≈ 現在のペースで{{days}}日。",individualSpools:"個別スプール",labelWeight:"ラベル",spoolCount_one:"{{count}}個のスプール",spoolCount_other:"{{count}}個のスプール",stockBreakRisk:"在庫切れリスク",stockBreakBefore:"補充前の在庫切れ",stockBreakDetail:"残り{{days}}日、リードタイム{{lt}}日。",reorderNow:"今すぐ発注",reorderTriggerPassed:"発注トリガー日 {{date}} が経過しました。",shoppingList:"購入リスト",shoppingListItems_one:"（{{count}}件）",shoppingListItems_other:"（{{count}}件）",shoppingListEmpty:"購入リストは空です。行のカートアイコンをクリックしてアイテムを追加してください。",addToCart:"購入リストに追加",alertsSnoozed:"このSKUのアラートをミュート",alertsEnabled:"このSKUのアラートを有効にする",addedToCart:"買い物リストに追加しました",failedAddItem:"アイテムの追加に失敗しました",listView:"リスト",logisticsView:"ロジスティクス",qty:"数量",weight:"重量",leadTime:"リードタイム",expectedRestock:"入荷予定日",status:"ステータス",note:"メモ",pending:"保留中",purchased:"発注済み",received:"受領済み",markPurchased:"発注済みとしてマーク",markReceived:"受領済みとしてマーク — スプールを在庫に追加",resetToPending:"保留中にリセット",remove:"削除",clearAll:"すべてクリア",downloadCsv:"CSV",addToCartTitle:"買い物リストに追加",byQuantity:"数量で",byDuration:"期間で",numberOfSpools:"スプール数",lastHowManyDays:"何日間持つべきですか？",noUsageQty:"使用データなし — 数量を1に設定しました。",noteOptional:"メモ（任意）",notePlaceholder:"例：プロジェクトX用、緊急…",addNSpools_one:"{{count}}個のスプールを追加",addNSpools_other:"{{count}}個のスプールを追加",onArrival:"入荷時",stockBreakIn:"{{days}}日後に在庫切れ。",stockRunsOutBefore:"リードタイム{{lt}}日が経過する前に在庫が枯渇します。",atRate:"{{rate}}g/日のペースでは",moreSpools_one:"あと{{count}}個のスプール",moreSpools_other:"あと{{count}}個のスプール",bridgeGap:"が不足を補うために必要です。",noReadAccess:"在庫予測を閲覧する権限がありません。",noWriteAccess:"予測設定を変更する権限がありません。"}},kpe={nav:{printers:"Stampanti",archives:"Archivi",queue:"Coda di stampa",stats:"Statistiche",profiles:"Profili",maintenance:"Manutenzione",projects:"Progetti",inventory:"Filamento",files:"File",makerworld:"MakerWorld",notifications:"Notifiche",settings:"Impostazioni",system:"Sistema",collapseSidebar:"Comprimi barra laterale",expandSidebar:"Espandi barra laterale",update:"Aggiorna",updateAvailable:"Aggiornamento disponibile: v{{version}}",updateAvailableBanner:"Versione {{version}} disponibile!",viewUpdate:"Vedi aggiornamento",viewOnGithub:"Vedi su GitHub",keyboardShortcuts:"Scorciatoie da tastiera (?)",switchToLight:"Passa a tema chiaro",switchToDark:"Passa a tema scuro",switchToSystem:"Passa a tema di sistema",smartSwitches:"Interruttori Smart",logout:"Esci",installApp:"Installa app",installAppSuccess:"Bambuddy è stato installato"},common:{save:"Salva",saving:"Salvataggio...",cancel:"Annulla",delete:"Elimina",edit:"Modifica",add:"Aggiungi",close:"Chiudi",confirm:"Conferma",loading:"Caricamento...",error:"Errore",errorLoading:"Errore di caricamento",retry:"Riprova",success:"Successo",warning:"Avviso",enabled:"Abilitato",disabled:"Disabilitato",yes:"Si",no:"No",on:"On",off:"Spento",all:"Tutti",none:"Nessuno",search:"Cerca",filter:"Filtro",sort:"Ordina",refresh:"Aggiorna",download:"Scarica",upload:"Carica",uploading:"Caricamento...",uploadFailed:"Caricamento fallito",actions:"Azioni",status:"Stato",name:"Nome",description:"Descrizione",date:"Data",time:"Ora",hours:"ore",minutes:"minuti",seconds:"secondi",days:"giorni",enable:"Abilita",disable:"Disabilita",permissions:"Permessi",noPrinters:"Nessuna stampante configurata",noData:"Nessun dato disponibile",linkNotFound:"Link non trovato",required:"Obbligatorio",optional:"Opzionale",dismiss:"Chiudi",apply:"Applica",reset:"Reimposta",export:"Esporta",import:"Importa",clear:"Pulisci",selectAll:"Seleziona tutto",deselectAll:"Deseleziona tutto",noChange:"— Nessun cambio —",unchanged:"Invariato",unassigned:"Non assegnato",unknown:"Sconosciuto",unknownError:"Errore sconosciuto",today:"Oggi",tomorrow:"Domani",asap:"ASAP",overdue:"Scaduto",now:"Ora",collapse:"Comprimi",expand:"Espandi",viewArchive:"Vedi archivio",viewInFileManager:"Vedi nel Gestore file",addedBy:"Aggiunto da {{username}}",prints:"stampe",more:"+{{count}} altre",ascending:"Crescente",descending:"Decrescente",back:"Indietro",copy:"Copia",copied:"Copiato!",printer:"Stampante",remove:"Rimuovi",type:"Tipo",print:"Stampa",rename:"Rinomina",move:"Sposta",create:"Crea",duplicate:"Duplica",left:"Sinistra",right:"Destra"},printers:{addPreflight:{checking:"Verifica della connessione...",warning:"Alcuni controlli di connessione non sono riusciti. Questa stampante potrebbe risultare offline. Controlla le verifiche qui sotto, risolvi ciò che puoi oppure salva comunque.",back:"Indietro",saveAnyway:"Salva comunque"},title:"Stampanti",addPrinter:"Aggiungi Stampante",editPrinter:"Modifica Stampante",deletePrinter:"Elimina Stampante",printerName:"Nome Stampante",serialNumber:"Numero Seriale",ipAddress:"Indirizzo IP",accessCode:"Codice di Accesso",model:"Modello",nozzleCount:"Numero Ugelli",autoArchive:"Auto Archiviazione",status:{available:"Disponibile",idle:"Inattiva",printing:"In stampa",paused:"In pausa",offline:"Offline",problem:"Problema",error:"Errore",finished:"Finita",unknown:"Sconosciuto"},temperatures:{nozzle:"Ugello",bed:"Piatto",chamber:"Camera"},progress:"{{percent}}% completato",timeRemaining:"{{time}} rimanente",deleteConfirm:'Sei sicuro di eliminare "{{name}}"?',maintenanceOk:"Manutenzione OK",maintenanceWarning:"{{count}} avviso",maintenanceWarning_plural:"{{count}} avvisi",maintenanceDue:"{{count}} in scadenza",maintenanceDue_plural:"{{count}} in scadenza",sort:{name:"Nome",status:"Stato",model:"Modello",location:"Posizione",ascending:"Ordina crescente",descending:"Ordina decrescente"},cardSize:{small:"Schede piccole",medium:"Schede medie",large:"Schede grandi",extraLarge:"Schede extra grandi"},hideOffline:"Nascondi offline",nextAvailable:"Prossima disponibile",powerOn:"Accendi",offlinePrintersWithPlugs:"Stampanti offline con smart plug",noPrintersConfigured:"Nessuna stampante configurata",search:"Cerca stampanti...",noSearchResults:"Nessuna stampante corrisponde alla tua ricerca o ai tuoi filtri",filter:{allStatuses:"Tutti gli stati",allLocations:"Tutti i luoghi"},toolbar:{filters:"Filtri",view:"Vista",actions:"Azioni"},readyToPrint:"Pronta a stampare",external:"Esterna",extL:"Ext-L",extR:"Ext-R",deleteArchives:"Elimina archivi stampa",noLabel:"Nessuna etichetta",printPreview:"Anteprima stampa",width:"Larghezza",height:"Altezza",noObjectsFound:"Nessun oggetto trovato",objectsLoadedOnPrintStart:"Gli oggetti sono caricati quando inizia una stampa",willBeSkipped:"Verra saltato",name:"Nome",serialCannotBeChanged:"Il numero seriale non può essere cambiato",locationHelp:"Usato per raggruppare stampanti e filtrare i lavori in coda",wifiSignal:{veryWeak:"Molto debole",weak:"Debole",fair:"Discreto",good:"Buono",excellent:"Eccellente"},maintenanceUpToDate:"Tutta la manutenzione aggiornata - Clicca per vedere",chamberLightOn:"Accendi luce camera",chamberLightOff:"Spegni luce camera",files:"File",browseFiles:"Sfoglia file stampante",autoOffAfterPrint:"Spegnimento automatico dopo stampa",autoOffExecuted:"Spegnimento automatico eseguito - accendi la stampante per reimpostare",hmsErrors:"Errori HMS",viewHmsErrors:"Vedi {{count}} errore(i) HMS",resume:"Riprendi",pause:"Pausa",stop:"Ferma",camera:"Telecamera",skipObject:"Salta Oggetto",reconnect:"Riconnetti",forceRefresh:"Forza aggiornamento",forceRefreshSuccess:"Aggiornamento richiesto",mqttDebug:"Debug MQTT",printerInformation:"Informazioni stampante",copyToClipboard:"Copia",copied:"Copiato!",state:"Stato",wifiSignalLabel:"Segnale WiFi",developerMode:"Modalità sviluppatore",enabled:"Attivato",disabled:"Disattivato",addedOn:"Aggiunta il",sdCard:"Scheda SD",inserted:"Inserita",notInserted:"Non inserita",totalPrintHours:"Ore di stampa",activeNozzle:"Attivo: ugello {{nozzle}}",nozzleRack:"Rack Ugelli",nozzleDocked:"Agganciato",nozzleMounted:"Montato",nozzleActive:"Attivo",nozzleIdle:"Inattivo",nozzleDiameter:"Diametro",nozzleType:"Tipo",nozzleStatus:"Stato",nozzleFilament:"Filamento",nozzleWear:"Usura",nozzleMaxTemp:"Temp Max",nozzleSerial:"Seriale",nozzleHardenedSteel:"Acciaio Temprato",nozzleStainlessSteel:"Acciaio Inox",nozzleTungstenCarbide:"Carburo di Tungsteno",nozzleFlow:"Flusso",nozzleHighFlow:"Alto Flusso",nozzleStandardFlow:"Standard",firmwareUpdate:"Aggiornamento Firmware",firmwareInstructions:"Sul touchscreen della stampante, vai a",firmwareNav:"Vai a",settings:"Impostazioni",firmware:"Firmware",discoverPrinters:"Trova Stampanti",searching:"Ricerca...",manualEntry:"Inserimento manuale",addFromCloud:"Aggiungi da Cloud",toast:{printerDeleted:"Stampante eliminata",missingSpoolAssignment:"Stampa avviata su {{printer}}. Mancano assegnazioni bobina per: {{slots}}",printerAdded:"Stampante aggiunta",printerUpdated:"Stampante aggiornata",failedToDelete:"Impossibile eliminare stampante",failedToAdd:"Impossibile aggiungere stampante",connectionFailedNotAdded:"Impossibile connettersi alla stampante. Verifica IP, numero di serie e codice di accesso e conferma che la modalità solo LAN sia attiva. La stampante non è stata aggiunta.",failedToUpdate:"Impossibile aggiornare stampante",commandSent:"Comando inviato",failedToSendCommand:"Impossibile inviare comando",turnedOn:"{{name}} accesa",failedToPowerOn:"Impossibile accendere {{name}}",scriptTriggered:"Script avviato",printStopped:"Stampa fermata",printPaused:"Stampa in pausa",printResumed:"Stampa ripresa",referenceDeleted:"Riferimento eliminato",detectionAreaSaved:"Area rilevamento salvata",failedToRunScript:"Impossibile eseguire script",failedToStopPrint:"Impossibile fermare stampa",failedToPausePrint:"Impossibile mettere in pausa stampa",failedToResumePrint:"Impossibile riprendere stampa",failedToControlChamberLight:"Impossibile controllare luce camera",failedToSetSpeed:"Impossibile impostare la velocità di stampa",failedToUpdateSetting:"Impossibile aggiornare impostazione",failedToSkipObjects:"Impossibile saltare oggetti",failedToRereadRfid:"Impossibile rileggere RFID",failedToCheckPlate:"Impossibile controllare piatto",failedToUpdateLabel:"Impossibile aggiornare etichetta",failedToDeleteReference:"Impossibile eliminare riferimento",failedToSaveDetectionArea:"Impossibile salvare area rilevamento",plateCheckEnabled:"Controllo piatto abilitato",plateCheckDisabled:"Controllo piatto disabilitato",calibrationSaved:"Calibrazione salvata!",calibrationFailed:"Calibrazione non riuscita",rfidRereadInitiated:"Rilettura RFID avviata",loadInitiated:"Caricamento filamento…",unloadInitiated:"Scaricamento filamento…",failedToLoad:"Caricamento filamento fallito",failedToUnload:"Scaricamento filamento fallito"},connection:{connected:"Connesso",offline:"Offline"},plateStatus:{markCleared:"Segna il piatto come liberato",cleared:"Piatto libero",notCleared:"Piatto non libero",inUse:"Piatto in uso"},queue:{inQueue:"{{count}} stampa in coda",inQueue_plural:"{{count}} stampe in coda"},controls:"Controlli",rfid:{reread:"Rileggi RFID"},ams:{load:"Carica",unload:"Scarica"},bedJog:{title:"Muovi il piano di stampa",bed:"Piano",step:"Passo (mm)",up:"Sposta piano su",down:"Sposta piano giù",disabledWhilePrinting:"Disabilitato durante la stampa",notHomedTitle:"Stampante non azzerata",notHomedMessage:"La stampante non è stata azzerata dall'ultima stampa. Esegui prima l'azzeramento automatico per un posizionamento sicuro (parcheggia la testa di stampa, poi azzera X, Y e Z), oppure muovi comunque — i finecorsa software verranno ignorati.",homeZ:"Azzeramento automatico",moveAnyway:"Muovi comunque",homingStarted:"Azzeramento automatico in corso…"},permission:{noAdd:"Non hai il permesso di aggiungere stampanti",noEdit:"Non hai il permesso di modificare stampanti",noDelete:"Non hai il permesso di eliminare stampanti",noControl:"Non hai il permesso di controllare stampanti",noFiles:"Non hai il permesso di accedere ai file stampante",noAmsRfid:"Non hai il permesso di rileggere AMS RFID",noSmartPlugControl:"Non hai il permesso di controllare smart plug",noCamera:"Non hai il permesso di visualizzare le telecamere"},modal:{addTitle:"Aggiungi Stampante",editTitle:"Modifica Stampante",myPrinter:"La mia Stampante",selectModel:"Seleziona modello...",locationGroup:"Posizione / Gruppo (opzionale)",locationPlaceholder:"es. Officina, Ufficio, Cantina",autoArchiveLabel:"Archivia automaticamente stampe completate",fromPrinterSettings:"Dalle impostazioni della stampante",modelOptional:"Modello (opzionale)",saveChanges:"Salva modifiche"},skipObjects:{tooltip:"Salta oggetti",onlyWhilePrinting:"Salta oggetti (solo durante la stampa)",requiresMultiple:"Salta oggetti (richiede 2+ oggetti)",title:"Salta Oggetti",matchIdsInfo:"Abbina gli ID con il display della stampante",printerShowsIds:"Lo schermo mostra gli ID oggetto sul piatto",skipSelected:"Salta selezionati",skipping:"Saltando...",noObjectsSelected:"Nessun oggetto selezionato",selectObjectsToSkip:"Seleziona gli oggetti da saltare nella stampa corrente",skipped:"saltato",objectsSkipped:"Oggetti saltati",activeCount:"{{count}} attivi",waitForLayer:"Attendi il layer 2+ per saltare oggetti (attualmente layer {{layer}})",skip:"Salta",confirmTitle:"Saltare oggetto?",confirmMessage:'Sei sicuro di voler saltare "{{name}}"? Questa azione non può essere annullata.'},confirm:{deleteTitle:"Elimina Stampante",deleteMessage:'Sei sicuro di eliminare "{{name}}"? Questo rimuoverà tutte le impostazioni di connessione.',deleteArchivesNote:"Tutta la cronologia di stampa sarà eliminata definitivamente.",keepArchivesNote:"La cronologia sarà mantenuta ma non più associata a questa stampante.",stopTitle:"Ferma Stampa",stopMessage:'Sei sicuro di fermare la stampa corrente su "{{name}}"? Questo annullerà il lavoro di stampa.',stopButton:"Ferma Stampa",pauseTitle:"Pausa Stampa",pauseMessage:'Sei sicuro di mettere in pausa la stampa corrente su "{{name}}"?',pauseButton:"Pausa Stampa",resumeTitle:"Riprendi Stampa",resumeMessage:'Sei sicuro di riprendere la stampa su "{{name}}"?',resumeButton:"Riprendi Stampa",powerOnTitle:"Accendi Stampante",powerOnMessage:'Sei sicuro di accendere "{{name}}"?',powerOnButton:"Accendi",powerOffTitle:"Spegni Stampante",powerOffMessage:'Sei sicuro di spegnere "{{name}}"?',powerOffWarning:'AVVISO: "{{name}}" sta stampando! Sei sicuro di spegnere? Questo interromperà la stampa e potrebbe danneggiare la stampante.',powerOffButton:"Spegni",haToggleTitle:'Commuta "{{name}}"',haToggleMessage:"Commutare l'entità Home Assistant {{entity}}? Questo potrebbe spegnere l'alimentazione se attualmente è accesa.",haToggleWarning:`AVVISO: "{{name}}" sta stampando! La commutazione di {{entity}} potrebbe togliere l'alimentazione e interrompere la stampa. Continuare?`,haToggleButton:"Commuta"},bulk:{select:"Seleziona",selectAll:"Seleziona tutto",selectByLocation:"Seleziona per posizione",selected:"{{count}} selezionato/i",actions:{stop:"Ferma",pause:"Pausa",resume:"Riprendi",clearPlate:"Svuota piano",clearHMS:"Cancella notifiche"},confirm:{stopTitle:"Ferma {{count}} stampe",stopMessage:"Questo annullerà le stampe attive su {{count}} stampante/i. Questa azione non può essere annullata.",stopButton:"Ferma tutte",pauseTitle:"Pausa {{count}} stampe",pauseMessage:"Questo metterà in pausa le stampe attive su {{count}} stampante/i.",pauseButton:"Pausa tutte",clearPlateTitle:"Svuota {{count}} piani di stampa",clearPlateMessage:"Questo svuoterà il piano di stampa su {{count}} stampante/i e potrebbe avviare i lavori in coda.",clearPlateButton:"Svuota tutti"},success:"{{action}} completato su {{count}} stampante/i",partial:"{{succeeded}} riuscito/i, {{failed}} fallito/i",noneApplicable:"Nessuna stampante selezionata è nello stato corretto per questa azione",selectByState:"Seleziona per stato"},discovery:{title:"Trova Stampanti",searching:"Ricerca...",scanning:"Scansione...",scanProgress:"Scansione... {{scanned}}/{{total}}",foundPrinters:"Trovate {{count}} stampante(i)",noPrintersFound:"Nessuna stampante trovata",noPrintersFoundSubnet:"Nessuna stampante trovata nella sottorete specificata.",noPrintersFoundNetwork:"Nessuna stampante trovata sulla rete.",allConfigured:"Tutte le stampanti trovate sono già configurate.",alreadyAdded:"Già aggiunta",select:"Seleziona",manualEntry:"Inserimento manuale",addFromCloud:"Aggiungi da Cloud",subnetToScan:"Sottorete da scansionare",dockerNote:"Docker rilevato. Inserisci la sottorete della stampante in notazione CIDR. Richiede network_mode: host in docker-compose.yml.",scanSubnet:"Scansiona sottorete per stampanti",discoverNetwork:"Trova stampanti in rete",scanningSubnet:"Scansione sottorete per stampanti Bambu...",scanningNetwork:"Scansione rete...",serialRequired:"Seriale richiesto",unknown:"Sconosciuto",failedToStart:"Avvio ricerca non riuscito",customSubnetOption:"Sottorete personalizzata...",customSubnetLabel:"Sottorete personalizzata (CIDR)",customSubnetNote:"Usa una sottorete personalizzata se la tua stampante è su una rete diversa da questo server. Le porte FTP (990) e MQTT (8883) devono essere raggiungibili attraverso il confine di routing."},drying:{start:"Avvia essiccazione",stop:"Ferma essiccazione",temperature:"Temperatura",duration:"Durata",hours:"ore",timeRemaining:"{{time}} rimanente",active:"Essiccazione",notSupported:"Essiccazione non supportata",powerRequired:"Collegare l'alimentatore AMS per abilitare l'asciugatura",startingDrying:"Avvio essiccazione...",stoppingDrying:"Arresto essiccazione...",rotateTray:"Ruota la bobina durante l'essiccazione"},filaments:"Filamenti",openCameraOverlay:"Apri overlay camera",openCameraWindow:"Apri camera in nuova finestra",firmwareUpdateAvailable:"Aggiornamento firmware disponibile: {{current}} → {{latest}}",firmwareUpToDate:"Firmware {{version}} — Aggiornato",firmwareUpdateButton:"Aggiorna",plateDetection:{noPermission:"Non hai il permesso di aggiornare le stampanti",enabledClick:"Controllo piatto abilitato - Clicca per disabilitare",disabledClick:"Controllo piatto disabilitato - Clicca per abilitare",manageCalibration:"Gestisci calibrazione rilevamento piatto",calibrationRequired:"Calibrazione richiesta",calibrationInstructions:"Assicurati che il piatto sia <strong>completamente vuoto</strong>, poi clicca Calibra.",calibrationDescription:"La calibrazione salva un'immagine di riferimento del piatto vuoto. I controlli futuri confronteranno con questo riferimento per rilevare oggetti.",calibrationTip:"<strong>Suggerimento:</strong> Puoi salvare fino a 5 calibrazioni per piatti diversi. Il sistema usa automaticamente la migliore corrispondenza durante il controllo.",plateEmpty:"Il piatto sembra vuoto",objectsDetected:"Oggetti rilevati sul piatto",confidence:"Confidenza",difference:"Differenza",analysisPreview:"Anteprima analisi:",analysisLegend:"Riquadro verde = area rilevamento, overlay rosso = differenze dalla calibrazione",savedReferences:"Riferimenti salvati ({{count}}/{{max}})",deleteReference:"Elimina riferimento",labelPlaceholder:"Etichetta...",clickToEdit:"{{label}} - Clicca per modificare",clickToAddLabel:"Clicca per aggiungere etichetta"},speed:{title:"Velocità di stampa",silent:"Silenzioso (50%)",standard:"Standard (100%)",sport:"Sport (124%)",ludicrous:"Ludicrous (166%)"},airduct:{title:"Modalità condotto d'aria",cooling:"Raffreddamento",heating:"Riscaldamento"},noSdCard:"Nessuna SD",door:{open:"Aperta",closed:"Chiusa"},fans:{partCooling:"Ventola raffreddamento parte",auxiliary:"Ventola ausiliaria",chamber:"Ventola camera"},clickToViewHmsErrors:"Clicca per vedere errori HMS",estimatedCompletion:"Tempo completamento stimato",plateNumber:"Piastra {{number}}",slotOptions:"Opzioni slot",amsPopup:{friendlyName:"Nome AMS",friendlyNamePlaceholder:"es. Nome AMS amichevole",serialNumber:"Numero di serie",firmwareVersion:"Firmware",save:"Salva",clear:"Cancella",noEditPermission:"Non hai il permesso di rinominare le unità AMS"},firmwareModal:{title:"Aggiornamento Firmware",titleUpToDate:"Info Firmware",currentVersion:"Corrente:",latestVersion:"Ultima:",releaseNotes:"Note di rilascio",checkingPrereqs:"Controllo prerequisiti...",sdCardReady:"SD pronta. Clicca sotto per caricare firmware.",uploadedSuccess:"Firmware caricato su SD!",applyInstructions:"Per applicare l'aggiornamento sulla stampante:",step1:"Sul touchscreen della stampante, vai a <strong>Impostazioni</strong>",step2:"Vai a <strong>Firmware</strong>",step3:"Seleziona <strong>Aggiorna da SD</strong>",step4:"L'aggiornamento richiede 10-20 minuti",done:"Fatto",starting:"Avvio...",uploadFirmware:"Carica Firmware",uploadFailed:"Avvio caricamento fallito: {{error}}",uploadedToast:"Firmware caricato! Avvia aggiornamento dal display.",availableVersions:"Versioni disponibili",usable:"Utilizzabile",unavailable:"Non disponibile",installed:"Installato",newerBadge:"più recente",olderBadge:"più vecchio",currentBadge:"attuale"},accessCodePlaceholder:"Lascia vuoto per mantenere quello attuale",roi:{title:"Area di rilevamento (ROI)",xStart:"X Inizio",yStart:"Y Inizio",width:"Larghezza",height:"Altezza",instruction:"Regola l'area di rilevamento per focalizzare il piatto. Il riquadro verde mostra l'area corrente."},developerModeWarning:"La modalità sviluppatore LAN non è attivata su: {{names}}. Alcune funzionalità potrebbero non funzionare.",howToEnable:"Come attivare",incompatibleFile:"Questo file è stato preparato per {{slicedFor}}, ma questa stampante è una {{printerModel}}",dropNotPrintable:"Solo i file .gcode e .gcode.3mf possono essere stampati",dropToPrint:"Rilascia per stampare",cannotPrint:"Stampante occupata"},archives:{title:"Archivi di stampa",searchPlaceholder:"Cerca archivi...",filterByPrinter:"Filtra per stampante",filterByStatus:"Filtra per stato",sortBy:"Ordina per",sortNewest:"Più recenti",sortOldest:"Meno recenti",sortName:"Nome",sortDuration:"Durata",sortLargest:"Più grandi",sortSmallest:"Più piccoli",sortSize:"Dimensione",noArchives:"Nessun archivio trovato",noArchivesSearch:"Nessun archivio corrisponde alla ricerca",originalPrintNotVisible:"Stampa originale non visibile - prova a rimuovere i filtri",noArchivesYet:"Nessun archivio ancora",prints:"stampe",pagination:{showing:"Mostrando",to:"a",of:"di",show:"Mostra",page:"Pagina",all:"Tutti"},loadingArchives:"Caricamento archivi...",releaseToUpload:"Rilascia per caricare",showAll:"Mostra tutti",showFavoritesOnly:"Solo preferiti",gridView:"Vista griglia",listView:"Vista elenco",calendarView:"Vista calendario",logView:"Registro stampe",manageTags:"Gestisci tag",showFailedPrints:"Mostra stampe fallite",hideFailedPrints:"Nascondi stampe fallite",hideDuplicates:"Nascondi duplicati",viewOriginalPrint:"Fai clic per visualizzare la stampa originale (#{{id}})",printTime:"Tempo di stampa",filamentUsed:"Filamento usato",cost:"Costo",reprint:"Ristampa",preview:"Anteprima",deleteArchive:"Elimina archivio",deleteConfirm:"Sei sicuro di eliminare questo archivio?",favorite:"Preferito",unfavorite:"Rimuovi dai preferiti",viewDetails:"Vedi dettagli",status:{completed:"Completato",failed:"Fallito",stopped:"Fermato"},toast:{source3mfAttached:"Sorgente 3MF allegata: {{filename}}",failedUploadSource3mf:"Caricamento sorgente 3MF non riuscito",source3mfRemoved:"Sorgente 3MF rimossa",failedRemoveSource3mf:"Rimozione sorgente 3MF non riuscita",f3dAttached:"F3D allegato: {{filename}}",failedUploadF3d:"Caricamento F3D non riuscito",f3dRemoved:"F3D rimosso",failedRemoveF3d:"Rimozione F3D non riuscita",timelapseAttached:"Timelapse allegato: {{filename}}",timelapseAlreadyAttached:"Timelapse già allegato",noMatchingTimelapse:"Nessun timelapse corrispondente",failedScanTimelapse:"Scansione timelapse non riuscita",failedAttachTimelapse:"Allegato timelapse non riuscito",timelapseRemoved:"Timelapse rimosso",failedRemoveTimelapse:"Impossibile rimuovere il timelapse",timelapseUploaded:"Timelapse caricato: {{filename}}",failedUploadTimelapse:"Impossibile caricare il timelapse",archiveDeleted:"Archivio eliminato",failedDeleteArchive:"Eliminazione archivio non riuscita",addedToFavorites:"Aggiunto ai preferiti",removedFromFavorites:"Rimosso dai preferiti",projectUpdated:"Progetto aggiornato",failedUpdateProject:"Aggiornamento progetto non riuscito",linkCopied:"Link copiato negli appunti",failedCopyLink:"Copia link non riuscita",photoDeleted:"Foto eliminata",failedDeletePhoto:"Eliminazione foto non riuscita",failedDeleteArchives:"Eliminazione archivi non riuscita",failedUpdateFavorites:"Aggiornamento preferiti non riuscito",exportDownloaded:"Export scaricato",exportFailed:"Export non riuscito"},menu:{print:"Stampa",schedule:"Programma",openInBambuStudio:"Apri nello slicer",slice:"Slice",externalLink:"Link esterno",viewOnMakerWorld:"Vedi su MakerWorld",preview3d:"Anteprima 3D",viewTimelapse:"Vedi Timelapse",scanForTimelapse:"Cerca Timelapse",uploadTimelapse:"Carica timelapse",removeTimelapse:"Rimuovi timelapse",downloadSource3mf:"Scarica Sorgente 3MF",uploadSource3mf:"Carica Sorgente 3MF",replaceSource3mf:"Sostituisci Sorgente 3MF",removeSource3mf:"Rimuovi Sorgente 3MF",uploadF3d:"Carica F3D",replaceF3d:"Sostituisci F3D",downloadF3d:"Scarica F3D",removeF3d:"Rimuovi F3D",download:"Scarica",copyDownloadLink:"Copia link download",qrCode:"Codice QR",viewPhotos:"Vedi foto",viewPhotosCount:"Vedi foto ({{count}})",projectPage:"Pagina progetto",addToFavorites:"Aggiungi ai preferiti",removeFromFavorites:"Rimuovi dai preferiti",edit:"Modifica",printLog:"Registro stampe",goToProject:"Vai al progetto: {{name}}",addToProject:"Aggiungi al progetto",removeFromProject:"Rimuovi dal progetto",loading:"Caricamento...",noProjectsAvailable:"Nessun progetto disponibile",searchProjects:"Cerca progetti…",select:"Seleziona",deselect:"Deseleziona",delete:"Elimina"},permission:{noReprint:"Non hai il permesso di ristampare questo archivio",noAddToQueue:"Non hai il permesso di aggiungere alla coda",noUpdateArchives:"Non hai il permesso di aggiornare archivi",noUploadFiles:"Non hai il permesso di caricare file",noDownload:"Non hai il permesso di scaricare archivi",noCopyLink:"Non hai il permesso di copiare link download",noDelete:"Non hai il permesso di eliminare questo archivio",noCreate:"Non hai il permesso di creare archivi"},platePicker:{title:"Seleziona la piastra da visualizzare",hint:"Questo archivio contiene più piastre. Scegline una da aprire nel visualizzatore GCode.",plateLabel:"Piastra {{index}}",objectCount:"{{count}} oggetto",objectCount_plural:"{{count}} oggetti",noGcode:"Questo archivio non contiene G-code generato da visualizzare. Aprilo prima in Bambu Studio per sezionarlo."},card:{previousPlate:"Piatto precedente",nextPlate:"Piatto successivo",plateNumber:"Piatto {{index}}",moreOptions:"Clic destro per altre opzioni",addToFavorites:"Aggiungi ai preferiti",removeFromFavorites:"Rimuovi dai preferiti",cancelled:"annullato",failed:"fallito",duplicate:"duplicato",duplicateTitle:"Questo modello è stato stampato prima",openSource3mf:"Apri sorgente 3MF in Bambu Studio (clic destro per altre opzioni)",downloadF3d:"Scarica file design Fusion 360",viewTimelapse:"Vedi timelapse",viewPhoto:"Vedi 1 foto",viewPhotos:"Vedi {{count}} foto",openFolder:"Apri cartella: {{name}}",slicedFile:"File slice - pronto a stampare",sourceFile:"Solo file sorgente - nessuna mappatura AMS disponibile",gcode:"GCODE",source:"SOURCE",project:"Progetto: {{name}}",runsBadge:"{{count}} stampe",runsBadgeTitle:"{{count}} stampe in totale — {{successful}} riuscite, {{failed}} fallite. Fai clic per vedere il registro completo.",estimated:"Stimato: {{time}}",actual:"Reale: {{time}}",accuracy:"Accuratezza: {{percent}}%",filament:"{{weight}} g",layer:"{{count}} strato",layers:"{{count}} strati",object:"{{count}} oggetto",objects:"{{count}} oggetti",slicedFor:"Sliced per {{model}}",uploadedBy:"Caricato da",noPermissionReprint:"Non hai il permesso di ristampare",noFileForReprint:"Nessun file 3MF disponibile — il file non è stato scaricato dalla stampante durante la registrazione",noPermissionEdit:"Non hai il permesso di modificare archivi",noPermissionDelete:"Non hai il permesso di eliminare archivi",reprint:"Ristampa",schedulePrint:"Programma Stampa",schedule:"Programma",openInBambuStudio:"Apri nello slicer",openInBambuStudioToSlice:"Apri nello slicer per slicing",slice:"Slice",externalLink:"Link esterno",makerWorld:"MakerWorld – {{designer}}",viewProject:"Vedi progetto",noExternalLink:"Nessun link esterno",preview3d:"Anteprima 3D",download:"Scarica",edit:"Modifica",delete:"Elimina"},runLog:{title:"Registro stampe",modalTitle:"Registro stampe — {{name}}",modalTitleFallback:"questo archivio",empty:"Nessun evento di stampa ancora registrato per questo archivio.",col:{date:"Data",status:"Stato",duration:"Durata",filament:"Filamento",cost:"Costo"},status:{completed:"Completata",failed:"Fallita",cancelled:"Annullata",stopped:"Interrotta",skipped:"Saltata",printing:"In stampa"}},modal:{deleteArchive:"Elimina Archivio",deleteConfirm:'Sei sicuro di eliminare "{{name}}"? Questa azione non può essere annullata.',deleteButton:"Elimina",deletePurgeStats:"Rimuovi anche questa stampa dalle Quick Stats (filamento, tempo, costo, energia)",removeSource3mf:"Rimuovi Sorgente 3MF",removeSource3mfConfirm:'Sei sicuro di rimuovere il file sorgente 3MF da "{{name}}"? Questo eliminerà il progetto slicer originale.',removeButton:"Rimuovi",removeF3d:"Rimuovi F3D",removeF3dConfirm:'Sei sicuro di rimuovere il file Fusion 360 da "{{name}}"?',removeTimelapse:"Rimuovi timelapse",removeTimelapseConfirm:'Sei sicuro di voler rimuovere il video timelapse da "{{name}}"?',timelapse:"{{name}} – Timelapse",selectTimelapse:"Seleziona Timelapse",selectTimelapseDesc:"Nessun abbinamento automatico trovato. Seleziona il timelapse per questa stampa:",deleteArchives:"Elimina Archivi",deleteArchivesConfirm:"Sei sicuro di eliminare {{count}} archivio(i)? Questa azione non può essere annullata.",deleteCount:"Elimina {{count}}"},page:{title:"Archivi",printsCount:"{{filtered}} di {{total}} stampe",dropFilesHere:"Rilascia file .3mf qui",releaseToUpload:"Rilascia per caricare",only3mfSupported:"Solo file .3mf supportati",close:"Chiudi",selected:"{{count}} selezionati",selectAll:"Seleziona tutto",tags:"Tag",project:"Progetto",favorite:"Preferito",delete:"Elimina",toggledFavorites:"Preferiti aggiornati per {{count}} archivio(i)",failedUpdateFavorites:"Aggiornamento preferiti non riuscito",archivesDeleted:"{{count}} archivio(i) eliminati",failedDeleteArchives:"Eliminazione archivi non riuscita",photoDeleted:"Foto eliminata",failedDeletePhoto:"Eliminazione foto non riuscita"},list:{name:"Nome",printer:"Stampante",date:"Data",size:"Dimensione",actions:"Azioni",hasTimelapse:"Ha timelapse"},log:{date:"Data",printName:"Nome stampa",printer:"Stampante",user:"Utente",status:"Stato",duration:"Durata",filament:"Filamento",allPrinters:"Tutte le stampanti",allUsers:"Tutti gli utenti",allStatuses:"Tutti gli stati",cancelled:"Annullato",skipped:"Saltato",dateFrom:"Dal",dateTo:"Al",noEntries:"Nessuna voce di registro trovata",showing:"{{count}} di {{total}} voci",rowsPerPage:"Righe",page:"Pagina",prev:"Prec.",next:"Succ.",clearLog:"Cancella registro",clearLogTitle:"Cancella registro stampe",clearLogConfirm:"Tutte le voci del registro di stampa verranno eliminate permanentemente. Gli archivi e gli elementi della coda non sono interessati. Questa azione non può essere annullata. Sei sicuro?",clearLogButton:"Cancella tutto",cleared:"{{count}} voci di registro cancellate",clearFailed:"Impossibile cancellare il registro stampe"}},queue:{filamentShort:{rowBadge:"Filamento insufficiente per la bobina assegnata",rowTooltip:"Lo scheduler ha segnalato questo elemento. Premi Play per vedere il deficit per slot e decidere se stampare comunque.",confirmTitle:"Filamento insufficiente",confirmIntro:"La bobina assegnata non puo coprire almeno uno slot. Stampare comunque?",lineItem:"Slot {{slot}}: servono {{required}} g, rimangono {{remaining}} g",unknown:"sconosciuto",printAnyway:"Stampa comunque"},title:"Coda di stampa",subtitle:"Programma e gestisci i tuoi lavori di stampa",addToQueue:"Aggiungi alla coda",print:"Stampa",reprint:"Ristampa",schedulePrint:"Programma Stampa",editQueueItem:"Modifica elemento coda",printToPrinters:"Stampa su {{count}} Stampanti",queueToPrinters:"Metti in coda su {{count}} Stampanti",queueSelectedPlates:"Metti in coda {{count}} piastre",selectAllPlates:"Seleziona tutte le {{count}} piastre",deselectAll:"Deseleziona tutto",printQueued:"Stampa in coda",itemsQueued:"{{count}} elementi in coda",sending:"Invio...",sendingProgress:"Invio {{current}}/{{total}}...",adding:"Aggiunta...",addingProgress:"Aggiunta {{current}}/{{total}}...",savingProgress:"Salvataggio {{current}}/{{total}}...",clearQueue:"Svuota coda",clearHistory:"Svuota cronologia",emptyQueue:"La coda è vuota",position:"Posizione",scheduledTime:"Ora programmata",moveUp:"Sposta su",moveDown:"Sposta giù",startNow:"Avvia ora",printingInProgress:"Stampa in corso...",viewArchive:"Vedi archivio",viewInFileManager:"Vedi nel Gestore file",itemCount:"{{count}} elemento",itemCount_plural:"{{count}} elementi",dragToReorder:"Trascina per riordinare (solo ASAP)",reorderHint:"La posizione influisce solo sugli elementi ASAP. Quelli programmati partono all'orario.",sjf:{label:"SJF",tooltip:"Lavoro più breve prima — lo scheduler dà priorità alle stampe più brevi"},addedBy:"Aggiunto da {{name}}",nextInQueue:"Prossimo in coda",clearPlateSuccess:"Piatto liberato — pronto per la prossima stampa",plateNumber:"Piatto {{index}}",quantity:"Quantità",quantityHint:"Crea {{count}} elementi in coda",activeBatches:"Lotti attivi",batchProgress:"{{completed}} di {{total}} completati",cancelBatch:"Annulla rimanenti",batchCancelled:"Elementi rimanenti del lotto annullati",cancelBatchConfirmTitle:"Annulla lotto",cancelBatchConfirmMessage:"Annullare tutti gli elementi in sospeso rimanenti in questo lotto?",batch:"Lotto",sections:{currentlyPrinting:"In stampa",queued:"In coda",history:"Cronologia"},status:{pending:"In attesa",waiting:"In attesa",printing:"In stampa",paused:"In pausa",completed:"Completato",failed:"Fallito",skipped:"Saltato",cancelled:"Annullato"},summary:{printing:"In stampa",queued:"In coda",totalTime:"Tempo totale coda",totalWeight:"Peso totale della coda",history:"Cronologia"},filter:{allPrinters:"Tutte le stampanti",unassigned:"Non assegnato",allStatus:"Tutti gli stati",allLocations:"Tutte le posizioni",any:"Qualsiasi"},sort:{byPosition:"Ordina per posizione",byName:"Ordina per nome",byPrinter:"Ordina per stampante",bySchedule:"Ordina per programma",byDate:"Ordina per data",ascendingOldest:"Crescente (più vecchi)",descendingNewest:"Decrescente (più recenti)"},badges:{staged:"In staging",requiresPrevious:"Richiede successo precedente",autoPowerOff:"Spegnimento automatico",gcodeInjection:"G-code"},empty:{title:"Nessuna stampa programmata",description:`Programma una stampa dalla pagina Archivi usando l'opzione "Programma" nel menu contestuale, o trascina i file per iniziare.`},time:{asap:"ASAP",overdue:"Scaduto",now:"Ora",lessThanMinute:"Tra meno di un minuto",inMinutes:"Tra {{count}} min",inHours:"Tra {{count}} ore"},actions:{stopPrint:"Ferma Stampa",startPrint:"Avvia Stampa",requeue:"Rimetti in coda"},bulkEdit:{title:"Modifica {{count}} elemento",title_plural:"Modifica {{count}} elementi",description:"Solo le impostazioni modificate saranno applicate agli elementi selezionati.",printer:"Stampante",noChange:"— Nessun cambio —",queueOptions:"Opzioni coda",staged:"In staging (avvio manuale)",autoPowerOff:"Spegnimento automatico dopo stampa",requirePrevious:"Richiede successo precedente",printOptions:"Opzioni stampa",bedLevelling:"Livellamento piatto",flowCalibration:"Calibrazione flusso",vibrationCalibration:"Calibrazione vibrazioni",layerInspection:"Controllo primo layer",timelapse:"Timelapse",useAms:"Usa AMS",applyChanges:"Applica modifiche",selectAll:"Seleziona tutto",deselectAll:"Deseleziona tutto",selected:"{{count}} selezionati",editSelected:"Modifica selezionati",cancelSelected:"Annulla selezionati"},confirm:{cancelTitle:"Annulla stampa programmata",cancelMessage:'Sei sicuro di annullare "{{name}}"?',stopTitle:"Ferma Stampa",stopMessage:'Sei sicuro di fermare la stampa corrente "{{name}}"? Questo annullerà il lavoro sulla stampante.',removeTitle:"Rimuovi dalla cronologia",removeMessage:'Sei sicuro di rimuovere "{{name}}" dalla cronologia coda?',clearHistoryTitle:"Svuota cronologia",clearHistoryMessage:"Sei sicuro di rimuovere {{count}} elemento(i) dalla cronologia?",cancelButton:"Annulla Stampa",stopButton:"Ferma Stampa",thisPrint:"questa stampa",thisItem:"questo elemento"},toast:{cancelled:"Elemento coda annullato",cancelFailed:"Annullamento non riuscito",removed:"Elemento coda rimosso",removeFailed:"Rimozione non riuscita",stopped:"Stampa fermata",stopFailed:"Impossibile fermare stampa",released:"Stampa rilasciata in coda",startFailed:"Avvio stampa non riuscito",reorderFailed:"Riordino coda non riuscito",historyCleared:"Cancellati {{count}} elementi cronologia",clearHistoryFailed:"Svuotamento cronologia non riuscito",updateFailed:"Aggiornamento elementi non riuscito",bulkCancelled:"Annullati {{count}} elementi",bulkCancelFailed:"Annullamento elementi non riuscito"},timeline:{listView:"Lista",timelineView:"Cronologia",unassigned:"Non assegnato",noData:"Nessuna stampa programmata per questo giorno",allDoneBy:"Tutte le stampe completate entro le {{time}}",staged:"In attesa",filterAll:"Mostra tutto",filterPrinting:"In stampa",filterQueued:"In coda",time:{anyMoment:"a momenti",minutesLeft:"{{minutes}}m rimanenti",hoursLeft:"{{hours}}h rimanenti",hoursMinutesLeft:"{{hours}}h {{minutes}}m rimanenti"},day:{previous:"Giorno precedente",next:"Giorno successivo",today:"Oggi"}},permissions:{noStopPrint:"Non hai il permesso di fermare stampe",noStartPrint:"Non hai il permesso di avviare stampe",noEdit:"Non hai il permesso di modificare questo elemento coda",noCancel:"Non hai il permesso di annullare questo elemento coda",noRequeue:"Non hai il permesso di rimettere in coda elementi",noRemove:"Non hai il permesso di rimuovere questo elemento coda",noClearHistory:"Non hai il permesso di svuotare tutta la cronologia",noEditItems:"Non hai il permesso di modificare elementi coda",noCancelItems:"Non hai il permesso di annullare elementi coda"}},backgroundDispatch:{unknownFile:"File sconosciuto",unknownPrinter:"Stampante sconosciuta",startingPrints:"Avvio stampe",progressSummary:"{{complete}}/{{total}} completati • Inviati: {{dispatched}} • In elaborazione: {{processing}}",expandDetails:"Espandi dettagli dispatch",collapseDetails:"Comprimi dettagli dispatch",dismissToast:"Chiudi notifica dispatch",cancelDispatchJob:"Annulla job dispatch",cancel:"Annulla",cancelling:"Annullamento…",awaitingPrinter:"In attesa della stampante…",status:{dispatched:"Inviato",processing:"In elaborazione",completed:"Completato",failed:"Fallito",cancelled:"Annullato"},toast:{cancellingUpload:"Annullamento upload...",cancelled:"Dispatch annullato",cancelFailed:"Impossibile annullare il dispatch",completeWithFailures:"Dispatch in background completato: {{completed}} riusciti, {{failed}} falliti",completeSuccess:"Dispatch in background completato: {{completed}} riusciti",printStartedRemaining:"{{completed}} stampa/e avviata/e, {{remaining}} in invio..."}},stats:{title:"Statistiche",subtitle:"Trascina i widget per riordinare. Clicca l'icona occhio per nascondere.",overview:"Panoramica",totalPrints:"Stampe totali",successRate:"Tasso di successo",totalPrintTime:"Tempo totale di stampa",printTime:"Tempo di stampa",totalFilament:"Filamento totale usato",filamentUsed:"Filamento usato",filamentCost:"Costo filamento",totalCost:"Costo totale",energyUsed:"Energia usata",energyCost:"Costo energia",energyWarmingUpTooltip:"Il tracciamento energia sta ancora raccogliendo snapshot orari. I totali per intervallo diventeranno accurati quando esisterà almeno uno snapshot prima dell’intervallo selezionato. I primi valori potrebbero essere sottostimati.",averagePrintTime:"Tempo medio di stampa",printsPerDay:"Stampe al giorno",byPrinter:"Per stampante",printsByPrinter:"Stampe per stampante",byMaterial:"Per materiale",byMonth:"Per mese",last7Days:"Ultimi 7 giorni",last30Days:"Ultimi 30 giorni",last90Days:"Ultimi 90 giorni",allTime:"Sempre",quickStats:"Statistiche rapide",printActivity:"Attivita di stampa",filamentTypes:"Tipi di filamento",filamentTrends:"Trend filamento",failureAnalysis:"Analisi guasti",timeAccuracy:"Accuratezza tempo",successful:"Riuscite:",failed:"Fallite:",cancelled:"Annullate:",perfectEstimate:"100% = stima perfetta",noTimeAccuracyData:"Nessun dato accuratezza tempo",noFilamentData:"Nessun dato filamento",noPrinterData:"Nessun dato stampante",noPrintData:"Nessun dato stampa",noPrintDataLast30Days:"Nessun dato stampa negli ultimi 30 giorni",failureReasons:"Cause guasto",topFailureReasons:"Cause principali",failedPrintsCount:"{{failed}} / {{total}} stampe fallite",lastWeekRate:"Settimana scorsa: {{rate}}%",resetLayout:"Reimposta layout",recalculateCosts:"Ricalcola costi",recalculateCostsHint:"Ricalcola tutti i costi archivi usando i prezzi filamento correnti",exportStats:"Esporta statistiche",exportAsCsv:"Esporta come CSV",exportAsExcel:"Esporta come Excel",hiddenCount:"{{count}} Nascosti",exportDownloaded:"Export scaricato",exportFailed:"Export non riuscito",layoutReset:"Layout reimpostato",recalculatedCosts:"Costi ricalcolati per {{count}} archivi",recalculateFailed:"Ricalcolo costi non riuscito",loadingStats:"Caricamento statistiche...",noPermissionResetLayout:"Non hai il permesso di reimpostare il layout",noPermissionRecalculate:"Non hai il permesso di ricalcolare i costi",noPrintDataInRange:"Nessun dato nel periodo selezionato",periodFilament:"Filamento utilizzato",periodCost:"Costo",avgPerPrint:"Media per stampa",usageOverTime:"Utilizzo nel tempo",filamentByWeight:"Peso",printDuration:"Durata stampa",printerUtilization:"Utilizzo stampante",filamentSuccess:"Successo per materiale",printHabits:"Abitudini di stampa",printTimeOfDay:"Ora di stampa",colorDistribution:"Distribuzione colori",noColorData:"Nessun dato colore disponibile",records:"Record",longestPrint:"Stampa più lunga",heaviestPrint:"Stampa più pesante",mostExpensivePrint:"Più costosa",busiestDay:"Giorno più attivo",successStreak:"Serie di successi",streakPrint:"stampa consecutiva",streakPrints:"{{count}} stampe consecutive",printerStats:"Statistiche stampante",hours:"ore",avgPrints:"Media stampe",noArchiveData:"Nessun dato di stampa disponibile",filamentByTime:"Tempo",avgWeight:"Media peso",avgTime:"Media tempo",filamentByPrints:"Stampe",timeframe:{today:"Oggi","this-week":"Questa settimana","this-month":"Questo mese","last-7":"Ultimi 7 giorni","last-30":"Ultimi 30 giorni","last-90":"Ultimi 90 giorni","this-year":"Quest'anno","all-time":"Tutto",custom:"Personalizzato",from:"Da",to:"A"},allUsers:"Tutti gli utenti",noUser:"Nessun utente (Sistema)",filterByUser:"Filtra per utente"},maintenance:{title:"Manutenzione",overview:"Panoramica",allOk:"Tutta la manutenzione aggiornata",dueCount:"{{count}} elemento in scadenza",dueCount_plural:"{{count}} elementi in scadenza",warningCount:"{{count}} avviso",warningCount_plural:"{{count}} avvisi",totalPrintTime:"Tempo totale di stampa",nextMaintenance:"Prossima manutenzione",nothingDue:"Niente in scadenza",tasks:"Attivita",lastPerformed:"Ultima esecuzione",interval:"Intervallo",hoursRemaining:"{{hours}}h rimanenti",hoursOverdue:"{{hours}}h in ritardo",markDone:"Segna come fatto",performMaintenance:"Esegui manutenzione",history:"Cronologia",noHistory:"Nessuna cronologia manutenzione",editPrintHours:"Modifica ore stampa",currentHours:"Ore attuali",statusTab:"Stato",settingsTab:"Impostazioni",overdueCount:"{{count}} in ritardo",dueSoonCount:"{{count}} in scadenza",dueSoon:"In scadenza",allGood:"Tutto ok",overdueBy:"In ritardo di {{duration}}",dueIn:"Scade tra {{duration}}",timeLeft:"{{duration}} rimanenti",day:"1 giorno",days:"{{count}} giorni",week:"1 settimana",weeks:"{{count}} settimane",month:"1 mese",months:"{{count}} mesi",year:"1 anno",maintenanceTypes:"Tipi di manutenzione",maintenanceTypesDescription:"Tipi di sistema e tue attivita personalizzate",addCustomType:"Aggiungi tipo personalizzato",restoreDefaults:"Ripristina attivita predefinite",intervalType:"Tipo intervallo",intervalValue:"Intervallo ({{type}})",icon:"Icona",documentationLink:"Link documentazione (opzionale)",assignToPrinters:"Assegna alle stampanti",selectAtLeastOnePrinter:"Seleziona almeno una stampante",addType:"Aggiungi tipo",custom:"Personalizzato",printHours:"Ore di stampa",calendarDays:"Giorni calendario",exampleName:"es. Sostituisci filtro HEPA",viewDocumentation:"Vedi documentazione",timeBasedInterval:"Intervallo basato sul tempo",intervalOverrides:"Override intervallo",intervalOverridesDescription:"Personalizza intervalli per stampanti specifiche",assignedToPrinters:"Assegnato alle stampanti:",noPrintersAssigned:"Nessuna stampante assegnata",addPrinterShort:"Aggiungi:",printersAssignedClick:"{{count}} stampante(i) assegnata - clicca per gestire",removeFromPrinter:"Rimuovi da questa stampante",types:{lubricateCarbonRods:"Lubrifica aste in carbonio",lubricateRails:"Lubrifica guide lineari",cleanNozzle:"Pulisci ugello/Hotend",checkBelts:"Controlla tensione cinghie",cleanBuildPlate:"Pulisci piatto",checkExtruder:"Controlla ingranaggi estrusore",checkCooling:"Controlla ventole raffreddamento",generalInspection:"Ispezione generale",cleanCarbonRods:"Pulisci aste in carbonio",lubricateSteelRods:"Lubrifica aste in acciaio",cleanSteelRods:"Pulisci aste in acciaio",cleanLinearRails:"Pulisci guide lineari",checkPtfeTube:"Controlla tubo PTFE",replaceHepaFilter:"Sostituisci filtro HEPA",replaceCarbonFilter:"Sostituisci filtro carbone",lubricateLeftNozzleRail:"Lubrifica guida ugello sinistro"},maintenanceComplete:"Manutenzione segnata come completata",typeUpdated:"Tipo manutenzione aggiornato",typeDeleted:"Tipo manutenzione eliminato",defaultsRestored:"Ripristinate {{count}} attivita predefinite",printHoursUpdated:"Ore di stampa aggiornate",printerAssigned:"Stampante assegnata",printerRemoved:"Stampante rimossa",deleteTypeConfirm:'Eliminare "{{name}}"?',deleteSystemTypeTitle:"Eliminare attività di manutenzione predefinita?",deleteSystemTypeMessage:`Sei sicuro di voler eliminare l'attività di manutenzione predefinita "{{name}}"?`,noPermissionUpdate:"Non hai il permesso di aggiornare elementi manutenzione",noPermissionPerform:"Non hai il permesso di eseguire manutenzione",noPermissionEditTypes:"Non hai il permesso di modificare tipi manutenzione",noPermissionDeleteTypes:"Non hai il permesso di eliminare tipi manutenzione",noPermissionEditHours:"Non hai il permesso di modificare ore stampa",noPermissionRemovePrinter:"Non hai il permesso di rimuovere assegnazioni stampanti",noPermissionAssignPrinter:"Non hai il permesso di assegnare stampanti",noPermissionEditIntervals:"Non hai il permesso di modificare intervalli",configureSettings:"Configura tipi e intervalli manutenzione"},settings:{title:"Impostazioni",general:"Generale",tabs:{general:"Generale",smartPlugs:"Prese smart",notifications:"Notifiche",queue:"Flusso",filament:"Filamento",network:"Rete",apiKeys:"Chiavi API",virtualPrinter:"Stampante virtuale",failureDetection:"Rilevamento guasti",users:"Utenti",backup:"Backup",emailAuth:"Autenticazione Email",ldap:"LDAP",twoFa:"Autenticazione 2FA",oidc:"SSO / OIDC",security:"Sicurezza",spoolbuddy:"SpoolBuddy"},ldap:{title:"Autenticazione LDAP",enabledDesc:"L'autenticazione LDAP è attiva",disabledDesc:"L'autenticazione LDAP è disattivata",disabledHint:"Configura e salva le impostazioni LDAP qui sotto, poi attiva.",enabled:"Autenticazione LDAP attivata",disabled:"Autenticazione LDAP disattivata",feature1:"Gli utenti possono accedere con le credenziali LDAP",feature2:"L'account amministratore locale rimane come fallback",feature3:"I gruppi LDAP vengono mappati ai gruppi BamBuddy al login",serverConfig:"Configurazione server LDAP",serverUrl:"URL del server",serverUrlHint:"Usa ldap:// per standard o ldaps:// per connessioni SSL",security:"Sicurezza",securityHint:"StartTLS aggiorna una connessione semplice a TLS. LDAPS usa TLS fin dall'inizio.",bindDn:"Bind DN (account di servizio)",bindPassword:"Password Bind",searchBase:"Base DN di ricerca",userFilter:"Filtro di ricerca utente",userFilterHint:"{username} viene sostituito con il nome utente. Usa (uid={username}) per OpenLDAP.",advanced:"Avanzate",autoProvision:"Provisioning automatico utenti",autoProvisionHint:"Crea automaticamente un account BamBuddy al primo accesso LDAP",defaultGroup:"Gruppo predefinito",defaultGroupNone:"— Nessuno (nessun fallback) —",defaultGroupHint:"Gruppo di fallback assegnato quando un utente LDAP si autentica ma non è presente in nessun gruppo LDAP mappato. Lascia vuoto per lasciare gli utenti non mappati senza autorizzazioni.",groupMapping:"Mappatura gruppi (JSON)",groupMappingHint:"Mappa i DN dei gruppi LDAP ai gruppi BamBuddy. Gruppi disponibili: ",testConnection:"Test connessione",settingsSaved:"Impostazioni LDAP salvate",errors:{serverRequired:"L'URL del server LDAP è obbligatorio",searchBaseRequired:"Il Base DN di ricerca è obbligatorio",enableAuthFirst:"Attiva prima l'autenticazione",configureLdapFirst:"Salva prima le impostazioni LDAP"}},email:{smtpSettings:"Configurazione SMTP",smtpHost:"Server SMTP",smtpPort:"Porta SMTP",security:"Sicurezza",authentication:"Autenticazione",username:"Nome utente",password:"Password",fromEmail:"Email mittente",fromName:"Nome mittente",testConnection:"Testa connessione SMTP",testRecipient:"Email destinatario test",sendTest:"Invia email di test",sending:"Invio...",save:"Salva impostazioni",saving:"Salvataggio...",advancedAuth:"Autenticazione avanzata",advancedAuthEnabled:"L'autenticazione avanzata è abilitata",advancedAuthEnabledDesc:"Le funzionalità di gestione utenti via email sono attive. I nuovi utenti riceveranno password generate automaticamente via email e potranno reimpostare la password tramite la funzione di recupero.",advancedAuthDisabled:"L'autenticazione avanzata è disabilitata",advancedAuthDisabledDesc:"Abilita l'autenticazione avanzata per attivare le funzionalità email per la gestione utenti.",enable:"Abilita",disable:"Disabilita",feature1:"Le password vengono generate automaticamente e inviate via email ai nuovi utenti",feature2:"Gli utenti possono accedere con nome utente o email",feature3:"La funzione di recupero password è disponibile",feature4:"Gli amministratori possono reimpostare le password utente via email",errors:{requiredFields:"Compilare tutti i campi obbligatori",usernameRequired:"Il nome utente è obbligatorio quando l'autenticazione è abilitata",enterTestEmail:"Inserire un indirizzo email di test",smtpServerAndEmail:"Compilare Server SMTP e Email mittente prima di testare",usernamePasswordRequired:"Nome utente e password sono obbligatori quando l'autenticazione è abilitata",configureSmtpFirst:"Configurare e testare le impostazioni SMTP prima",enableAuthFirst:"Per utilizzare le funzionalità basate sulla posta elettronica, è necessario prima abilitare l'autenticazione."},success:{settingsSaved:"Impostazioni SMTP salvate con successo"},securityOptions:{starttls:"STARTTLS (Porta 587)",ssl:"SSL/TLS (Porta 465)",none:"Nessuna (Porta 25)"},authOptions:{enabled:"Abilitata",disabled:"Disabilitata"}},appearance:"Aspetto",notifications:"Notifiche",smartPlugs:"Prese smart",spoolman:"Spoolman",updates:"Aggiornamenti",language:"Lingua",languageDescription:"Seleziona la lingua preferita",theme:"Tema",themeLight:"Chiaro",themeDark:"Scuro",themeSystem:"Sistema",defaultView:"Vista predefinita",defaultViewDescription:"Pagina da mostrare all'apertura dell'app",checkForUpdates:"Controlla aggiornamenti",autoUpdate:"Aggiornamento automatico",currentVersion:"Versione attuale",latestVersion:"Ultima versione",upToDate:"Sei aggiornato",updateAvailable:"Aggiornamento disponibile",notificationLanguage:"Lingua notifiche",notificationLanguageDescription:"Lingua per notifiche push",bedCooledThreshold:"Soglia raffreddamento piatto",bedCooledThresholdDescription:"Temperatura sotto la quale il piatto è considerato raffreddato dopo una stampa",userNotificationsEnabled:"Notifiche utente",userNotificationsEnabledDescription:"Abilita il menu notifiche utente e le notifiche e-mail per gli eventi di stampa. Richiede l'autenticazione avanzata.",userNotificationsDisabledHint:"Abilita l'autenticazione avanzata per usare le notifiche utente.",notificationProviders:"Provider notifiche",addProvider:"Aggiungi provider",editProvider:"Modifica provider",providerType:"Tipo provider",testNotification:"Notifica di test",testSuccess:"Notifica di test inviata",testFailed:"Invio notifica di test fallito",quietHours:"Ore silenziose",quietHoursDescription:"Non disturbare in queste ore",quietHoursStart:"Inizio",quietHoursEnd:"Fine",events:{title:"Eventi notifica",printStart:"Stampa avviata",printComplete:"Stampa completata",printFailed:"Stampa fallita",printStopped:"Stampa interrotta",printProgress:"Avanzamento",printProgressDescription:"Notifica al 25%, 50%, 75%",printerOffline:"Stampante offline",printerError:"Errore stampante",filamentLow:"Filamento in esaurimento",maintenanceDue:"Manutenzione dovuta",maintenanceDueDescription:"Notifica quando serve manutenzione"},smartPlug:{title:"Prese smart",add:"Aggiungi presa smart",edit:"Modifica presa smart",name:"Nome",ipAddress:"Indirizzo IP",linkedPrinter:"Stampante collegata",autoOn:"Accensione automatica",autoOnDescription:"Accendi all'avvio stampa",autoOff:"Spegnimento automatico",autoOffDescription:"Spegni dopo il completamento",offDelay:"Ritardo spegnimento",offDelayMinutes:"Minuti dopo la stampa",offDelayTemp:"Quando ugello sotto temperatura",currentState:"Stato attuale",turnOn:"Accendi",turnOff:"Spegni"},filamentTracking:"Tracciamento filamento",filamentTrackingDesc:"Scegli come tracciare le bobine di filamento. Puoi usare l'inventario integrato o collegare un server Spoolman esterno.",filamentChecks:"Controlli filamento",disableFilamentWarnings:"Disabilita avvisi filamento",disableFilamentWarningsDesc:"Non mostrare avvisi per filamento insufficiente durante la stampa o l'accodamento",preferLowestFilament:"Preferisci il filamento con meno residuo",preferLowestFilamentDesc:"Quando più bobine corrispondono, usa quella con meno filamento rimanente",trackingModeBuiltIn:"Inventario integrato",trackingModeBuiltInDesc:"Riconoscimento RFID automatico e tracciamento dell'uso inclusi",trackingModeSpoolmanDesc:"Server esterno per la gestione del filamento",builtInFeatureRfid:"Rileva automaticamente le bobine Bambu Lab RFID nell'AMS",builtInFeatureUsage:"Traccia il consumo di filamento per stampa",builtInFeatureCatalog:"Gestisci bobine, colori e profili K-factor",builtInFeatureThirdParty:"Le bobine di terze parti possono essere assegnate alle bobine dell'inventario",amsSyncButton:"Sincronizza pesi dall'AMS",amsSyncTitle:"Sincronizza pesi bobine dall'AMS",amsSyncMessage:"Questo sovrascriverà tutti i pesi delle bobine dell'inventario con i valori attuali di percentuale rimanente dell'AMS dalle stampanti connesse. Usa questa funzione per recuperare dati di peso corrotti. Le stampanti devono essere online.",amsSyncing:"Sincronizzazione...",amsSyncSuccess:"{{synced}} bobina/e sincronizzata/e, {{skipped}} saltata/e",amsSyncError:"Impossibile sincronizzare i pesi dall'AMS",spoolmanAmsSyncButton:"Sincronizza i pesi Spoolman dall'AMS",spoolmanAmsSyncTitle:"Sincronizza i pesi delle bobine Spoolman dall'AMS",spoolmanAmsSyncMessage:"Questo aggiornerà i pesi di tutte le bobine Spoolman in base ai valori di riempimento AMS correnti delle stampanti connesse. Le stampanti devono essere online.",spoolmanAmsSyncing:"Sincronizzazione...",spoolmanAmsSyncSuccess:"{{synced}} bobina/e sincronizzata/e, {{skipped}} saltata/e",spoolmanAmsSyncError:"Impossibile sincronizzare i pesi Spoolman dall'AMS",spoolmanAmsSyncErrorUnreachable:"Sincronizzazione fallita (Spoolman non raggiungibile)",spoolmanAmsSyncErrorNotConfigured:"Sincronizzazione fallita (Spoolman non configurato)",spoolmanNotConfigured:"Spoolman non configurato",spoolmanFilamentCatalogTitle:"Catalogo filamenti Spoolman",spoolmanFilamentCatalogDesc:"Nomi dei filamenti e pesi tara dalla tua istanza Spoolman. Nome e peso bobina sono modificabili qui; tutte le altre proprietà sono gestite direttamente in Spoolman.",spoolmanUrl:"URL Spoolman",spoolmanUrlHint:"URL del server Spoolman (es. http://localhost:7912)",spoolmanConnected:"Connesso",spoolmanDisconnected:"Disconnesso",status:"Stato",connect:"Connetti",disconnect:"Disconnetti",howSyncWorks:"Come funziona la sincronizzazione",syncInfoRfidOnly:"Solo le bobine ufficiali Bambu Lab con RFID vengono sincronizzate",syncInfoAutoCreate:"Le nuove bobine vengono create automaticamente in Spoolman alla prima sincronizzazione",syncInfoThirdPartySkipped:"Le bobine non Bambu Lab (terze parti, ricaricate) vengono saltate",linkingExistingSpools:"Collegamento bobine esistenti",linkingExistingSpoolsDesc:`Per collegare le bobine Spoolman esistenti all'AMS, passa il mouse su uno slot AMS e clicca "Collega a Spoolman".`,syncMode:"Modalità sincronizzazione",syncModeAuto:"Automatica",syncModeManual:"Solo manuale",syncModeAutoDesc:"I dati AMS si sincronizzano automaticamente quando vengono rilevate modifiche",syncModeManualDesc:"Sincronizzazione solo quando attivata manualmente",syncAmsData:"Sincronizza dati AMS",syncAmsDataDesc:"Sincronizza manualmente i dati AMS della stampante su Spoolman",allPrinters:"Tutte le stampanti",noDefaultPrinter:"Nessuna predefinita (chiedi ogni volta)",sidebarOrder:"Ordine barra laterale",saveThumbnails:"Salva miniature",captureFinishPhoto:"Acquisisci foto finale",noPrintersConfigured:"Nessuna stampante configurata",archiveMode:{always:"Crea sempre voce archivio",never:"Non creare mai voce archivio",ask:"Chiedi ogni volta"},checkForUpdatesLabel:"Controlla aggiornamenti",checkPrinterFirmware:"Controlla firmware stampante",includeBetaUpdates:"Includi versioni beta",includeBetaUpdatesDesc:"Notifica versioni beta e prerelease durante il controllo aggiornamenti",enableRetry:"Abilita retry",homeAssistantDescription:"Controlla prese smart tramite Home Assistant",environmentManagedLabel:"(Gestito dall'ambiente)",autoEnabledViaEnv:"Abilitato automaticamente tramite variabili d'ambiente",urlFromEnvReadOnly:"Valore impostato dalla variabile d'ambiente HA_URL (sola lettura)",tokenFromEnvReadOnly:"Valore impostato dalla variabile d'ambiente HA_TOKEN (sola lettura)",mqttConnectedTo:"Connesso a",prometheusDescription:"Esponi dati stampante in formato Prometheus",noSmartPlugsTitle:"Nessuna presa smart configurata",noSmartPlugsDescription:"Aggiungi una presa smart Tasmota per monitorare energia e automatizzare il controllo.",noProvidersTitle:"Nessun provider configurato",noProvidersDescription:"Aggiungi un provider per ricevere avvisi.",noTemplatesAvailable:"Nessun template disponibile. Riavvia il backend per generare i template predefiniti.",apiPermissionView:"Visualizza stato stampante e coda",apiPermissionEdit:"Aggiungi e rimuovi elementi dalla coda di stampa",apiKeysEmptyTitle:"Nessuna chiave API",apiKeysEmptyDescription:"Crea una chiave API per integrare servizi esterni.",noUsersFound:"Nessun utente trovato",noGroupsFound:"Nessun gruppo trovato",noGroupsAvailable:"Nessun gruppo disponibile",passwordsDoNotMatch:"Le password non coincidono",systemGroupWarning:"I nomi dei gruppi di sistema non possono essere modificati",authDisabledTitle:"Autenticazione disabilitata",authDisabledFeature1:"Richiedi accesso per usare il sistema",authDisabledFeature2:"Crea più utenti con permessi basati sui gruppi",authDisabledFeature3:"Controlla accesso con 50+ permessi granulari",userHasCreated:"Questo utente ha creato:",userItemsQuestion:"Cosa vuoi fare con questi elementi?",deleteUserConfirm:"Sei sicuro di voler eliminare questo utente?",actionCannotBeUndone:"Questa azione non può essere annullata.",addFirstSmartPlug:"Aggiungi la tua prima presa smart",providers:"Provider",log:"Registro",testAll:"Testa tutto",testResults:"Risultati test",testPassedCount:"{{count}} riusciti",testFailedCount:"{{count}} falliti",messageTemplates:"Template messaggi",messageTemplatesDescription:"Personalizza i messaggi per ogni evento.",apiKeys:"Chiavi API",apiKeysDescription:"Crea chiavi API per integrazioni esterne e webhook.",createKey:"Crea chiave",apiKeyCreated:"Chiave API creata con successo",apiKeyCopyWarning:"Copia questa chiave ora - non verra mostrata di nuovo!",useInApiBrowser:"Usa nel Browser API",createNewApiKey:"Crea nuova chiave API",keyName:"Nome chiave",keyNamePlaceholder:"es., Home Assistant, OctoPrint",readStatus:"Leggi stato",readStatusDescription:"Visualizza stato stampante e coda",manageQueue:"Gestisci coda",manageQueueDescription:"Aggiungi e rimuovi elementi dalla coda di stampa",controlPrinter:"Controlla stampante",controlPrinterDescription:"Metti in pausa, riprendi e ferma stampe",manageLibrary:"Gestisci libreria",manageLibraryDescription:"Carica, rinomina ed elimina file della libreria; importa modelli da MakerWorld",manageInventory:"Gestisci inventario",manageInventoryDescription:"Crea, aggiorna ed elimina bobine e voci di inventario. Necessario per i chioschi SpoolBuddy (scansione NFC, letture della bilancia, comandi di sistema del chiosco).",libraryBadge:"Libreria",inventoryBadge:"Inventario",cloudAccess:"Consenti accesso cloud",cloudAccessDescription:"Legge i preset e i filamenti Bambu Cloud per tuo conto. Richiede l'accesso a Bambu Cloud.",cloudBadge:"Cloud",updateEnergyCost:"Aggiorna prezzo elettricità",updateEnergyCostDescription:"Consenti a questa chiave di inviare in POST un nuovo prezzo elettricità per kWh a /settings/electricity-price. Utile per automazioni Home Assistant a tariffa dinamica (Tibber, Octopus, ecc.). Questo è l'unico campo di impostazioni scrivibile via API key.",energyCostBadge:"Energia",legacyKey:"Legacy",legacyKeyTooltip:"Creato prima della proprietà per utente; ricreare per accesso cloud",unnamedKey:"Chiave senza nome",lastUsed:"Ultimo uso",read:"Lettura",control:"Controllo",createFirstKey:"Crea la tua prima chiave",webhookEndpoints:"Endpoint webhook",webhookApiKeyHint:"Usa la tua chiave API nell'header X-API-Key.",webhook:{getAllStatus:"Ottieni stato di tutte le stampanti",getSpecificStatus:"Ottieni stato di una stampante",addToQueue:"Aggiungi alla coda di stampa",pausePrint:"Metti in pausa stampa",resumePrint:"Riprendi stampa",stopPrint:"Ferma stampa"},apiBrowser:"Browser API",apiBrowserDescription:"Esplora e testa tutti gli endpoint API disponibili.",apiKeyForTesting:"Chiave API per test",apiKeyPlaceholder:"Incolla qui la tua chiave API per testare gli endpoint autenticati...",apiKeyHint:"Questa chiave verra inviata come header X-API-Key.",deleteApiKeyTitle:"Elimina chiave API",deleteApiKeyMessage:"Sei sicuro di voler eliminare questa chiave API? Le integrazioni che la usano non funzioneranno più.",deleteKey:"Elimina chiave",amsDisplayThresholds:"Soglie visualizzazione AMS",amsThresholdsDescription:"Configura soglie colore per umidità e temperatura AMS.",humidity:"Umidità",goodGreen:"Buono (verde)",fairOrange:"Discreto (arancione)",aboveFairBad:"Sopra soglia discreta mostra rosso (scarso)",fairAlsoDryingThreshold:"Questa soglia viene usata anche per attivare l'asciugatura automatica",temperature:"Temperatura",goodBlue:"Buono (blu)",aboveFairHot:"Sopra soglia discreta mostra rosso (caldo)",historyRetention:"Conservazione cronologia",keepSensorHistory:"Mantieni cronologia sensori per",historyRetentionDescription:"I dati più vecchi saranno eliminati automaticamente",defaultPrintOptions:"Opzioni di stampa predefinite",defaultPrintOptionsDescription:"Imposta i valori predefiniti per le opzioni di stampa. Possono essere modificati nella finestra di stampa.",defaultBedLevelling:"Livellamento piatto",defaultBedLevellingDesc:"Livellamento automatico del piatto prima della stampa",defaultFlowCali:"Calibrazione flusso",defaultFlowCaliDesc:"Calibra il flusso di estrusione",defaultVibrationCali:"Calibrazione vibrazioni",defaultVibrationCaliDesc:"Riduce gli artefatti di ringing",defaultLayerInspect:"Ispezione primo strato",defaultLayerInspectDesc:"Ispezione IA del primo strato",defaultTimelapse:"Timelapse",defaultTimelapseDesc:"Registra un video timelapse",staggeredStart:"Avvio scaglionato",staggeredStartDescription:"Dimensione gruppo e intervallo predefiniti per scaglionare avvii di batch multi-stampante. Sovrascrivibili per batch nella finestra di stampa.",plateClear:"Conferma piatto libero",requirePlateClear:"Richiedi conferma piatto libero",requirePlateClearDescription:'Quando questa opzione è abilitata, lo scheduler attende una conferma per stampante che il piatto sia libero prima di avviare le stampe in coda su stampanti con lavori completati. Disabilitandola vengono nascosti anche il badge di stato del piatto e il pulsante "Segna il piatto come liberato" sulle schede stampante.',gcodeInjection:"Iniezione G-code",gcodeInjectionDescription:`Configura G-code personalizzato da iniettare all'inizio e/o alla fine delle stampe per sistemi di stampa automatica come Farmloop, SwapMod, AutoClear e Printflow 3D. Gli snippet sono configurati per modello di stampante e applicati quando "Inietta G-code" è abilitato su un elemento della coda.`,gcodeInjectionNoPrinters:"Nessuna stampante trovata. Aggiungi stampanti per configurare gli snippet G-code.",gcodeStartLabel:"G-code iniziale",gcodeEndLabel:"G-code finale",gcodeStartPlaceholder:"G-code inserito prima dell'inizio della stampa...",gcodeEndPlaceholder:"G-code aggiunto dopo la fine della stampa...",staggerGroupSize:"Dimensione gruppo",staggerGroupSizeHelp:"Stampanti da avviare simultaneamente per gruppo",staggerInterval:"Intervallo (minuti)",staggerIntervalHelp:"Ritardo tra l'avvio di ogni gruppo",queueDrying:"Asciugatura automatica",queueDryingDescription:"Asciugare automaticamente il filamento AMS quando la stampante è inattiva tra le stampe in coda. Usa la soglia di umidità sopra.",queueDryingEnabled:"Abilita asciugatura automatica",queueDryingEnabledDescription:"Avvia l'asciugatura AMS automaticamente quando la stampante è inattiva e l'umidità supera la soglia",queueDryingBlock:"Attendi completamento asciugatura",queueDryingBlockDescription:"Blocca la coda di stampa fino al completamento dell'asciugatura. Se disattivato, le stampe hanno priorità.",ambientDryingEnabled:"Asciugatura ambientale",ambientDryingEnabledDescription:"Asciuga automaticamente il filamento sulle stampanti inattive quando l'umidità supera la soglia, anche senza stampe in coda.",dryingPresets:"Preset di asciugatura",dryingPresetsDescription:"Temperatura e durata per tipo di filamento. AMS 2 Pro usa temperature più basse, AMS-HT supporta temperature più alte.",dryingFilament:"Filamento",printModal:"Modale stampa",expandCustomMapping:"Espandi mapping personalizzato di default",expandCustomMappingDescription:"Quando stampi su più stampanti, mostra mapping AMS per stampante espanso",authentication:"Autenticazione",authEnabledDescription:"La tua istanza è protetta con autenticazione",authDisabledDescription:"Abilita per richiedere accesso e gestire utenti",authDisabledMessage:"Abilita autenticazione per creare account, gestire permessi e proteggere la tua istanza Bambuddy.",enableAuthentication:"Abilita autenticazione",currentUser:"Utente corrente",changePassword:"Cambia password",admin:"Amministratore",users:"Utenti",addUser:"Aggiungi utente",groups:"Gruppi",addGroup:"Aggiungi gruppo",system:"Sistema",noDescription:"Nessuna descrizione",userCount:"{{count}} utenti",permissionCount:"{{count}} permessi",createUser:"Crea utente",username:"Nome utente",enterUsername:"Inserisci nome utente",password:"Password",enterPassword:"Inserisci password",passwordRequirements:"Almeno 8 caratteri, con una maiuscola, una minuscola, una cifra e un carattere speciale.",confirmPassword:"Conferma password",confirmPasswordPlaceholder:"Conferma password",viewReleaseOnGitHub:"Vedi release su GitHub",turnAllPlugsOn:"Accendi tutte le prese",turnAllPlugsOff:"Spegni tutte le prese",clearNotificationLogs:"Cancella log notifiche",clearLogsMessage:"Questo eliminerà definitivamente tutti i log notifiche più vecchi di 30 giorni. Questa azione non può essere annullata.",clearLogs:"Cancella log",resetUiPreferences:"Reimposta preferenze UI",resetUiPreferencesMessage:"Questo reimposterà le preferenze UI ai valori predefiniti: ordine barra laterale, tema, layout dashboard, modalità vista e preferenze ordinamento. Stampanti, archivi e impostazioni server NON saranno modificati. La pagina si ricaricherà dopo la cancellazione.",resetPreferences:"Reimposta preferenze",deleteGroupTitle:"Elimina gruppo",deleteGroupMessage:"Sei sicuro di voler eliminare questo gruppo? Gli utenti in questo gruppo perderanno questi permessi.",deleteGroup:"Elimina gruppo",disableAuthenticationTitle:"Disabilita autenticazione",disableAuthenticationMessage:"Sei sicuro di voler disabilitare l'autenticazione? Questo renderà la tua istanza Bambuddy accessibile senza login. Tutti gli utenti resteranno nel database ma l'autenticazione sarà disabilitata.",disableAuthentication:"Disabilita autenticazione",configureBambuddy:"Configura Bambuddy",systemDefault:"Predefinito di sistema",archiveSettings:"Impostazioni archivio",newWindow:"Nuova finestra",embeddedOverlay:"Overlay incorporato",preferredSlicer:"Slicer preferito",preferredSlicerDescription:"Scegli quale applicazione slicer usare per aprire i file",orcaslicerKnownIssuesWarning:"OrcaSlicer 2.3.2 / 2.4.0-dev hanno bug CLI noti che bloccano lo slicing di molti 3MF creati da Bambu — vedi le issue upstream #12426 (segfault su file multi-estrusore dipinti) e #13386 (rifiuto della validazione rigorosa dei range di parametri). Bambu Studio è raccomandato finché non arrivano le correzioni upstream.",useSlicerApi:"Usa Slicer API",useSlicerApiDescription:'Se attivo, le azioni "Slice" aprono il modale slicer integrato e chiamano il sidecar slicer-API. Se disattivo (predefinito), inoltrano al slicer desktop tramite schema URI.',slicerCard:"Slicer",orcaslicerApiUrl:"OrcaSlicer sidecar URL",bambuStudioApiUrl:"Bambu Studio sidecar URL",slicerApiUrlDescription:"URL del container sidecar slicer-API. Lascia vuoto per usare le variabili d'ambiente SLICER_API_URL / BAMBU_STUDIO_API_URL.",slicerBundles:{title:"Bundle slicer",description:'Importa un Printer Preset Bundle (.bbscfg) esportato da BambuStudio (File → Esporta → Esporta bundle preset → "Printer preset bundle"). Una volta importato, le richieste di slicing possono scegliere preset dal bundle per nome senza ricaricare il triplet di profili JSON.',uploadButton:"Carica bundle",uploading:"Caricamento…",loading:"Caricamento bundle…",empty:"Nessun bundle importato ancora.",summary:"{{processCount}} processo · {{filamentCount}} preset filamento",delete:"Elimina",uploadSuccess:"{{name}} importato",uploadError:"Caricamento bundle fallito: {{message}}",deleteSuccess:"Bundle rimosso",deleteError:"Eliminazione bundle fallita: {{message}}",confirmDeleteTitle:"Rimuovere questo bundle?",confirmDeleteMessage:'Le richieste di slicing che fanno riferimento a "{{name}}" falliranno fino al re-import del bundle.'},externalCameras:"Camere esterne",costTracking:"Tracciamento costi",printsOnly:"Solo stampe",totalConsumption:"Consumo totale",dataManagement:"Gestione dati",storageUsage:"Memoria utilizzata",storageUsageDescription:"Ripartizione della memoria per categoria",storageUsageTotal:"Totale",storageUsageErrors:"Errori",storageUsageOtherBreakdown:"Altro (include risorse statiche, script e file di configurazione)",storageUsageSystem:"Sistema",storageUsageData:"Dati",storageUsageUnavailable:"Informazioni sull'utilizzo della memoria non disponibili",clearNotificationLogsDescription:"Elimina log notifiche più vecchi di 30 giorni",resetUiPreferencesDescription:"Reimposta ordine barra laterale, tema, modalità vista e preferenze layout. Stampanti, archivi e impostazioni non vengono modificati.",enableHomeAssistant:"Abilita Home Assistant",enableMqtt:"Abilita MQTT",useTls:"Usa TLS",enableMetricsEndpoint:"Abilita endpoint metriche",availableMetrics:"Metriche disponibili",editUser:"Modifica utente",deleteUserTitle:"Elimina utente",groupName:"Nome gruppo",leaveEmptyForAnonymous:"Lascia vuoto per anonimo",leaveEmptyForNoAuth:"Lascia vuoto per nessuna autenticazione",enterNewPassword:"Inserisci nuova password",confirmNewPassword:"Conferma nuova password",enterGroupName:"Inserisci nome gruppo",enterDescriptionOptional:"Inserisci descrizione (opzionale)",enterCurrentPassword:"Inserisci password attuale",enterNewPasswordMin6:"Inserisci nuova password (min 6 caratteri)",toast:{keyCopied:"Chiave copiata negli appunti",copyFailed:"Copia chiave fallita",keyAddedToBrowser:"Chiave aggiunta al Browser API",clearLogsFailed:"Eliminazione log fallita",uiPreferencesReset:"Preferenze UI reimpostate. Aggiornamento...",authDisabled:"Autenticazione disabilitata con successo",authDisableFailed:"Disabilitazione autenticazione fallita",apiKeyCreated:"Chiave API creata",apiKeyDeleted:"Chiave API eliminata",userCreated:"Utente creato con successo",userUpdated:"Utente aggiornato con successo",userDeleted:"Utente eliminato con successo",groupCreated:"Gruppo creato con successo",groupUpdated:"Gruppo aggiornato con successo",groupDeleted:"Gruppo eliminato con successo",fillRequiredFields:"Compila tutti i campi obbligatori",passwordsDoNotMatch:"Le password non coincidono",passwordTooShort:"La password deve essere di almeno 8 caratteri",passwordNeedsUppercase:"La password deve contenere almeno una lettera maiuscola",passwordNeedsLowercase:"La password deve contenere almeno una lettera minuscola",passwordNeedsDigit:"La password deve contenere almeno una cifra",passwordNeedsSpecial:"La password deve contenere almeno un carattere speciale",enterGroupName:"Inserisci un nome gruppo",settingsSaved:"Impostazioni salvate",noPermissionUpdate:"Non hai il permesso di modificare le impostazioni",cameraSettingsSaved:"Impostazioni camera salvate",enterCameraUrl:"Inserisci un URL camera",passwordChanged:"Password cambiata con successo",connectionFailed:"Connessione fallita",testFailed:"Test fallito",cameraConnected:"Camera connessa{{resolution}}"},testConnection:"Testa connessione",catalog:{spoolCatalog:"Catalogo bobine",spoolCatalogDescription:"Pesi delle bobine vuote per marca/tipo. Utilizzato per la ricerca automatica del peso quando si aggiungono bobine.",searchCatalog:"Cerca nel catalogo...",addNewEntry:"Aggiungi nuova voce",namePlaceholder:"Nome (es. Bambu Lab - Plastica)",weight:"Peso",type:"Tipo",default:"Predefinito",custom:"Personalizzato",noMatch:"Nessuna voce corrisponde alla ricerca",empty:"Nessuna voce nel catalogo",deleteEntry:"Elimina voce",deleteConfirm:'Sei sicuro di voler eliminare "{{name}}"?',resetCatalog:"Ripristina catalogo",resetConfirm:"Ripristinare il catalogo ai valori predefiniti? Tutte le voci personalizzate verranno rimosse.",loadFailed:"Impossibile caricare il catalogo bobine",nameWeightRequired:"Nome e peso sono obbligatori",entryAdded:"Voce aggiunta",addFailed:"Impossibile aggiungere la voce",entryUpdated:"Voce aggiornata",updateFailed:"Impossibile aggiornare la voce",entryDeleted:"Voce eliminata",deleteFailed:"Impossibile eliminare la voce",resetSuccess:"Catalogo ripristinato ai valori predefiniti",resetFailed:"Impossibile ripristinare il catalogo",exported:"{{count}} voci esportate",imported:"{{added}} voci importate ({{skipped}} saltate)",importFailed:"Impossibile importare: formato JSON non valido",exportTooltip:"Esporta catalogo in JSON",importTooltip:"Importa catalogo da JSON",resetTooltip:"Ripristina valori predefiniti",selectedCount:"{{count}} selezionati",deleteSelected:"Elimina selezionati",bulkDeleteConfirm:"Eliminare {{count}} voci?",bulkDeleted:"{{count}} voci eliminate",bulkDeleteFailed:"Impossibile eliminare le voci",material:"Materiale",spoolWeight:"Peso bobina",color:"Colore",updateSpoolWeight:"Aggiorna peso bobina",filamentUpdated:"Filamento aggiornato",filamentUpdateFailed:"Aggiornamento filamento non riuscito",filamentUpdateInvalid:"Dati filamento non validi",keepExistingSpoolWeight:"Mantieni vecchio peso per le bobine esistenti",keepExistingSpoolWeightDesc:"Le bobine già create con questo tipo di filamento mantengono il vecchio peso tara. Le nuove bobine usano il valore aggiornato.",applyToAllSpools:"Applica a tutte le bobine",applyToAllSpoolsDesc:"Tutti i calcoli del peso per questo tipo di filamento usano immediatamente il nuovo peso tara."},colorCatalog:{title:"Catalogo colori",description:"Colori del filamento per produttore/materiale. Utilizzato per la ricerca automatica del colore quando si aggiungono bobine.",searchColors:"Cerca colori...",allManufacturers:"Tutti i produttori",addNewColor:"Aggiungi nuovo colore",manufacturer:"Produttore",colorName:"Nome colore",hex:"Hex",materialOptional:"Materiale (opzionale)",showing:"Visualizzazione di {{filtered}} su {{total}} colori",noMatch:"Nessun colore corrisponde alla ricerca",empty:"Nessun colore nel catalogo",deleteColor:"Elimina colore",deleteConfirm:'Sei sicuro di voler eliminare "{{name}}"?',resetCatalog:"Ripristina catalogo colori",resetConfirm:"Ripristinare il catalogo ai valori predefiniti? Tutti i colori personalizzati verranno rimossi.",sync:"Sincronizza",starting:"Avvio...",syncTooltip:"Sincronizza da FilamentColors.xyz (2000+ colori, potrebbe richiedere un minuto)",loadFailed:"Impossibile caricare il catalogo colori",fieldsRequired:"Produttore, nome colore e colore hex sono obbligatori",colorAdded:"Colore aggiunto",addFailed:"Impossibile aggiungere il colore",colorUpdated:"Colore aggiornato",updateFailed:"Impossibile aggiornare il colore",colorDeleted:"Colore eliminato",deleteFailed:"Impossibile eliminare il colore",resetSuccess:"Catalogo colori ripristinato ai valori predefiniti",resetFailed:"Impossibile ripristinare il catalogo",syncUpToDate:"Già aggiornato ({{count}} colori verificati)",syncComplete:"{{added}} nuovi colori aggiunti ({{skipped}} già esistenti)",syncError:"Errore di sincronizzazione",syncFailed:"Impossibile sincronizzare da FilamentColors.xyz",exported:"{{count}} colori esportati",imported:"{{added}} colori importati ({{skipped}} saltati)",importFailed:"Impossibile importare: formato JSON non valido",selectedCount:"{{count}} selezionati",deleteSelected:"Elimina selezionati",bulkDeleteConfirm:"Eliminare {{count}} colori?",bulkDeleted:"{{count}} colori eliminati",bulkDeleteFailed:"Impossibile eliminare i colori"},dateFormat:"Formato data",dateFormatUs:"US (MM/GG/AAAA)",dateFormatEu:"EU (GG/MM/AAAA)",dateFormatIso:"ISO (AAAA-MM-GG)",timeFormat:"Formato ora",timeFormat12:"12 ore (3:30 PM)",timeFormat24:"24 ore (15:30)",defaultPrinter:"Stampante predefinita",defaultPrinterDescription:"Preseleziona questa stampante per upload, ristampe e altre operazioni.",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"Trascina gli elementi nella barra laterale per riordinare. Ripristina l'ordine predefinito qui.",setDefault:"Imposta predefinito",sidebarOrderSetDefaultHint:"Imposta predefinito applica l'ordine attuale del menu agli utenti che non hanno ancora personalizzato il proprio.",sidebarDefaultSet:"L'ordine predefinito del menu è stato impostato.",sidebarDefaultCleared:"Ordine predefinito del menu cancellato.",sidebarDefaultFailed:"Impossibile impostare l'ordine predefinito del menu.",reset:"Ripristina",darkMode:"Modalità scura",lightMode:"Modalità chiara",active:"(attivo)",background:"Sfondo",accent:"Accento",style:"Stile",bgNeutral:"Neutro",bgWarm:"Caldo",bgCool:"Freddo",bgOled:"OLED Nero",bgSlate:"Blu ardesia",bgForest:"Verde foresta",accentGreen:"Verde",accentTeal:"Verde acqua",accentBlue:"Blu",accentOrange:"Arancione",accentPurple:"Viola",accentRed:"Rosso",styleClassic:"Classico",styleGlow:"Luminoso",styleVibrant:"Vibrante",themeToggleHint:"Passa tra modalità scura, chiara e sistema con l'icona nella barra laterale.",autoArchivePrints:"Archiviazione automatica stampe",autoArchiveDescription:"Salva automaticamente i file 3MF al completamento delle stampe",saveThumbnailsDescription:"Estrai e salva le immagini di anteprima dai file 3MF",captureFinishPhotoDescription:"Scatta una foto dalla fotocamera della stampante al completamento della stampa. Bambuddy registra un breve timelapse durante la stampa in modo che la foto possa essere ricavata dal momento precedente all'abbassamento del piatto; il file del timelapse viene mantenuto se hai abilitato il timelapse per questa stampa, altrimenti viene eliminato automaticamente dopo l'acquisizione della foto.",ffmpegNotInstalled:"ffmpeg non installato",ffmpegRequired:"L'acquisizione dalla fotocamera richiede ffmpeg. Installalo tramite <brew>brew install ffmpeg</brew> (macOS) o <apt>apt install ffmpeg</apt> (Linux).",camera:"Fotocamera",cameraViewMode:"Modalità visualizzazione fotocamera",cameraOverlayDescription:"La fotocamera si apre in un overlay ridimensionabile sulla schermata principale",cameraWindowDescription:"La fotocamera si apre in una finestra separata del browser",externalCamerasDescription:"Configura fotocamere esterne per sostituire la fotocamera integrata della stampante. Supporta stream MJPEG, RTSP, snapshot HTTP e fotocamere USB (V4L2). Quando abilitata, la fotocamera esterna viene usata per la vista in diretta e le foto di completamento.",cameraPlaceholderUsb:"Percorso dispositivo (/dev/video0)",cameraPlaceholderUrl:"URL fotocamera (rtsp://... o http://...)",cameraTypeMjpeg:"Stream MJPEG",cameraTypeRtsp:"Stream RTSP",cameraTypeSnapshot:"Snapshot HTTP",cameraTypeUsb:"Fotocamera USB (V4L2)",cameraSnapshotUrl:"URL istantanea (facoltativo)",cameraSnapshotUrlPlaceholder:"http://192.168.1.61:1984/api/frame.jpeg?src=printer",cameraSnapshotUrlHelp:"URL singolo frame usato per miniature di notifica, foto di fine, frame del layer timelapse e rilevamento del piano. Timelapse e rilevamento del piano richiedono ciascuno il proprio toggle per stampante — questo URL è solo la sorgente immagine che usano quando attivi. Lascia vuoto per acquisire dallo stream live sopra. Utile per go2rtc (/api/frame.jpeg) e telecamere IP con endpoint snapshot dedicato.",cameraRotation:"Rotazione",test:"Test",connected:"Connesso",disconnected:"Disconnesso",currency:"Valuta",defaultFilamentCost:"Costo filamento predefinito (per kg)",electricityCost:"Costo elettricità per kWh",energyDisplayMode:"Modalità visualizzazione energia",energyModePrintDescription:"La dashboard mostra la somma dell'energia usata durante le stampe",energyModeTotalDescription:"La dashboard mostra l'energia totale dalle prese smart",fileManager:"Gestore file",createArchiveEntry:"Crea voce archivio durante la stampa",createArchiveEntryDescription:"Quando si stampa dal gestore file, crea opzionalmente una voce di archivio",lowDiskSpaceWarning:"Avviso spazio disco insufficiente",lowDiskSpaceDescription:"Mostra avviso quando lo spazio disco scende sotto questa soglia",printerFirmware:"Firmware stampante",checkFirmwareDescription:"Controlla aggiornamenti firmware da Bambu Lab",bambuddySoftware:"Software Bambuddy",autoCheckDescription:"Controlla automaticamente nuove versioni all'avvio",checkNow:"Controlla ora",updateAvailableVersion:"Aggiornamento disponibile: v{{version}}",releaseNotes:"Note di rilascio",updateViaDocker:"Aggiorna tramite Docker Compose:",updateViaHomeAssistant:"Gli aggiornamenti sono gestiti dal Supervisor di Home Assistant. Apri Impostazioni → Add-on → Bambuddy in Home Assistant per installare la nuova versione.",installUpdate:"Installa aggiornamento",latestVersionRunning:"Stai usando l'ultima versione",failedToCheckUpdates:"Controllo aggiornamenti fallito: {{error}}",backupRestore:"Backup e ripristino",backupRestoreDescription:"Esporta/importa impostazioni e configura backup GitHub",goToBackup:"Vai al backup",externalUrl:"URL esterno",externalUrlDescription:"L'URL esterno dove Bambuddy è accessibile. Usato per immagini di notifica e integrazioni esterne.",bambuddyUrl:"URL Bambuddy",externalUrlHint:"Includi protocollo e porta (es. http://192.168.1.100:8000)",ftpRetry:"Riprova FTP",ftpRetryDescription:"Riprova le operazioni FTP quando il WiFi della stampante è instabile. Si applica a download 3MF, upload stampe, download timelapse e aggiornamenti firmware.",autoRetryDescription:"Riprova automaticamente le operazioni FTP fallite",retryAttempts:"Tentativi di ripetizione",retryDelay:"Ritardo ripetizione",connectionTimeout:"Timeout connessione",time_one:"{{count}} volta",time_other:"{{count}} volte",second_one:"{{count}} secondo",second_other:"{{count}} secondi",nSeconds:"{{count}} secondi",increaseForWeakWifi:"Aumenta per stampanti con WiFi debole",homeAssistant:"Home Assistant",homeAssistantFullDescription:"Connetti a Home Assistant per controllare le prese smart tramite l'API REST HA. Supporta entità switch, light, input_boolean e script.",homeAssistantUrl:"URL Home Assistant",longLivedAccessToken:"Token di accesso a lunga durata",haTokenHint:"Crea un token in HA: Profilo → Token di accesso a lunga durata → Crea token",connectionSuccessful:"Connessione riuscita",connectionFailed:"Connessione fallita",haConnectionSuccess:"Connesso con successo a Home Assistant.",haConnectionFailed:"Connessione a Home Assistant fallita.",mqttPublishing:"Pubblicazione MQTT",mqttDescription:"Pubblica eventi BamBuddy su un broker MQTT esterno per l'integrazione con Node-RED, Home Assistant e altri sistemi di automazione.",mqttEnableDescription:"Pubblica eventi su broker MQTT esterno",brokerHostname:"Hostname broker",port:"Porta",usernameOptional:"Nome utente (opzionale)",passwordOptional:"Password (opzionale)",topicPrefix:"Prefisso topic",topicPrefixHint:"I topic saranno: {{prefix}}/printers/<serial>/status, ecc.",prometheusMetrics:"Metriche Prometheus",prometheusEndpointDescription:"Esponi metriche stampante su <code>/api/v1/metrics</code> per monitoraggio Prometheus/Grafana.",bearerTokenOptional:"Token Bearer (opzionale)",bearerTokenHint:"Se impostato, le richieste devono includere <code>Authorization: Bearer <token></code>",metricsConnectionStatus:"Stato connessione",metricsPrinterState:"Stato stampante (idle/printing/ecc)",metricsPrintProgress:"Progresso stampa 0-100%",metricsBedTemp:"Temperatura piatto",metricsNozzleTemp:"Temperatura ugello",metricsPrintsTotal:"Stampe totali per risultato",metricsMore:"...e altro (strati, ventole, coda, consumo filamento)",smartPlugsDescription:"Connetti prese smart (Tasmota o Home Assistant) per automatizzare il controllo dell'alimentazione e monitorare il consumo energetico delle stampanti.",allOn:"Tutte accese",allOff:"Tutte spente",addSmartPlug:"Aggiungi presa smart",energySummary:"Riepilogo energia",currentPower:"Potenza attuale",plugsOnline:"{{reachable}}/{{total}} prese online",today:"Oggi",yesterday:"Ieri",total:"Totale",enablePlugsForSummary:"Abilita le prese per vedere il riepilogo energia",addNotificationProvider:"Aggiungi",systemBadge:"(Sistema)",creating:"Creazione...",changing:"Modifica...",deleteUserAndItems:"Elimina utente E i suoi elementi",deleteUserKeepItems:"Elimina utente, mantieni elementi (diventeranno senza proprietario)",ok:"OK",twoFa:{totpTitle:"App Authenticator (TOTP)",totpDesc:"Usa un'app come Google Authenticator, Aegis o Authy.",emailOtpTitle:"OTP via e-mail",emailOtpDesc:"Invia un codice monouso a {{email}} al momento del login.",emailOtpNoEmail:"Aggiungi un indirizzo e-mail al tuo account per abilitare questo metodo.",addEmailFirst:"Il tuo account non ha un indirizzo e-mail. Chiedi a un amministratore di aggiungerne uno.",setupTotp:"Configura app Authenticator",setupAuthApp:"Configura app Authenticator",setupInstructions:"Scansiona il codice QR con la tua app authenticator, poi conferma con un codice.",manualEntry:"Impossibile scansionare? Inserisci questo segreto manualmente:",scannedContinue:"Codice scansionato — continua",enterCodeToConfirm:"Inserisci il codice a 6 cifre dalla tua app authenticator per confermare.",activate:"Attiva",disableTotp:"Disabilita Authenticator",disableConfirmHint:"Inserisci un codice TOTP valido o un codice di backup per disabilitare l'authenticator.",totpDisabled:"App Authenticator disabilitata.",emailOtpEnabled:"OTP via e-mail abilitato.",emailOtpDisabled:"OTP via e-mail disabilitato.",smtpRequired:"Configura e testa prima le impostazioni SMTP.",invalidCode:"Codice non valido. Riprova.",enableEmailOtp:"Abilita OTP via e-mail",disableEmailOtp:"Disabilita OTP via e-mail",emailSetupEnterCode:"È stato inviato un codice di verifica al tuo indirizzo e-mail. Inseriscilo qui sotto per confermare che possiedi questa casella di posta.",verifyAndEnable:"Verifica e abilita",emailDisablePasswordHint:"Inserisci la password del tuo account per confermare la disabilitazione dell'OTP via e-mail.",passwordPlaceholder:"Inserisci la tua password",backupCodesTitle:"Salva i tuoi codici di backup",backupCodesWarning:"Conserva questi codici in un posto sicuro. Ogni codice può essere usato una sola volta.",backupCodesRemaining:"{{count}} codici di backup rimanenti",savedCodes:"Codici salvati",regenBackup:"Rigenera codici di backup",regenBackupHint:"Inserisci il tuo codice TOTP corrente per generare 10 nuovi codici di backup.",newBackupCodes:"Nuovi codici di backup",linkedAccounts:"Account SSO collegati",linkedAccountsDesc:"Questi provider di identità esterni sono collegati al tuo account.",oidcUnlinked:"Account scollegato."},oidc:{title:"Provider SSO / OIDC",desc:"Configura provider OpenID Connect per il single sign-on.",addProvider:"Aggiungi provider",newProvider:"Nuovo provider",empty:"Nessun provider OIDC configurato.",created:"Provider creato.",updated:"Provider aggiornato.",deleted:"Provider eliminato.",refreshIcon:"Aggiorna icona",removeIcon:"Rimuovi icona",iconRefreshed:"Icona aggiornata.",iconRemoved:"Icona rimossa.",iconFetchFailed:"Impossibile recuperare l'icona dall'URL del provider.",deleteTitle:"Elimina provider",deleteMessage:'Eliminare "{{name}}"? Tutti gli account collegati verranno disconnessi.',form:{name:"Nome visualizzato",issuerUrl:"URL emittente",clientId:"ID client",clientSecret:"Client secret",scopes:"Scope",iconUrl:"URL icona (opzionale)",enabled:"Abilitato",autoCreate:"Crea utenti automaticamente",autoCreateDesc:"Crea automaticamente un account locale al primo accesso.",autoLink:"Collega automaticamente gli account esistenti",autoLinkDesc:"Collega gli account locali esistenti tramite email al primo accesso.",secretHint:"lascia vuoto per mantenere",secretPlaceholder:"nuovo segreto",emailClaim:"Claim email",emailClaimDesc:"Claim JWT usato come identità email. Usare 'preferred_username' o 'upn' per Azure Entra ID (che non invia email_verified). Usare solo nomi di claim affidabili.",emailClaimPlaceholder:"e-mail",emailClaimCustomClaimAutoLinkWarning:"I claim personalizzati sono sicuri per il collegamento automatico solo se il valore è gestito dal tenant (es. Azure Entra ID upn / preferred_username). Non abilitare il collegamento automatico se il tuo IdP consente agli utenti di auto-assegnare questo claim.",requireEmailVerified:"Richiedi verifica email",requireEmailVerifiedDesc:"Accetta il claim email solo se il provider lo contrassegna come verificato.",requireEmailVerifiedWarning:"Attenzione: l'email sarà accettata senza verifica. Usare solo con provider affidabili.",requireEmailVerifiedAutoLink:"Disabilitare prima il collegamento automatico per modificare questa impostazione.",defaultGroup:"Gruppo predefinito",defaultGroupDesc:"Gruppo assegnato agli utenti creati automaticamente. Ritorno a Viewers se non impostato.",defaultGroupViewersFallback:"Viewers (predefinito)"}},encryption:{title:"Stato crittografia MFA",enabledFromEnv:"Crittografia a riposo abilitata (chiave dalla variabile d'ambiente MFA_ENCRYPTION_KEY)",enabledFromFile:"Crittografia a riposo abilitata (chiave caricata dalla directory dei dati)",enabledGenerated:"Crittografia a riposo abilitata con chiave auto-generata",notConfigured:"Crittografia a riposo non configurata",notConfiguredDesc:"I segreti TOTP e i client_secrets OIDC sono memorizzati in chiaro. Imposta MFA_ENCRYPTION_KEY o riavvia Bambuddy con una directory dati scrivibile per generarne uno automaticamente.",allEncrypted:"Tutti i segreti MFA sono crittografati a riposo.",legacyRowsLabel:"Righe legacy in chiaro",encryptedRowsLabel:"Righe crittografate",legacyRowsWarning:"Rilevate {{count}} righe legacy in chiaro. Salva di nuovo il provider OIDC o re-iscrivi l'app authenticator dell'utente per migrare allo storage crittografato.",backupHint:"La chiave generata automaticamente è memorizzata in DATA_DIR/.mfa_encryption_key ed è inclusa nei backup locali ZIP. Mantieni sicuri i tuoi backup o imposta MFA_ENCRYPTION_KEY esplicitamente.",decryptionBrokenTitle:"Chiave di crittografia mancante",decryptionBrokenError:"{{count}} record crittografati non possono essere decifrati perché la chiave di crittografia non è più disponibile. Ripristina il precedente MFA_ENCRYPTION_KEY o DATA_DIR/.mfa_encryption_key per recuperare.",migrationErrorWarning:"{{count}} riga/righe legacy non sono state ricifrate all'avvio. Controlla i log del server e riavvia Bambuddy per riprovare."},spoolbuddy:{infoTitle:"Dispositivi SpoolBuddy",infoBody:"I kiosk SpoolBuddy si registrano automaticamente tramite heartbeat. Annulla la registrazione qui se un dispositivo non è più in uso o se un duplicato obsoleto è rimasto dopo un crash del daemon.",duplicatesTitle:"{{count}} dispositivi registrati",duplicatesBody:"Solo il primo dispositivo registrato viene utilizzato dall'interfaccia kiosk. Se uno di questi è un duplicato obsoleto da un crash, annulla la sua registrazione — un dispositivo online si ri-registrerà al prossimo heartbeat.",empty:"Nessun dispositivo SpoolBuddy registrato.",online:"Online",offline:"Offline",unregister:"Annulla registrazione",unregisterSuccess:"Dispositivo deregistrato",unregisterError:"Deregistrazione non riuscita",confirmTitle:"Annullare la registrazione del dispositivo SpoolBuddy?",confirmBody:'Questo rimuoverà "{{hostname}}" ({{deviceId}}) dal database. Se il dispositivo è online, si ri-registrerà al prossimo heartbeat.',ipAddress:"Indirizzo IP",firmware:"Firmware",lastSeen:"Ultimo rilevamento",daemonUptime:"Uptime del daemon",systemUptime:"Uptime sistema",never:"mai",nfc:"NFC",scale:"Bilancia",cpuTemp:"Temp. CPU",cpuLoad:"Carico CPU",memory:"Memoria",disk:"Disco",update:"Aggiorna",updateConfirmTitle:"Aggiornare il daemon Spoolbuddy?",updateConfirmBody:`Avviare un aggiornamento software su "{{hostname}}"? Il daemon si riavvierà al termine dell'aggiornamento.`,restartBrowser:"Riavvia browser",restartBrowserConfirmTitle:"Riavviare il browser del kiosk?",restartBrowserConfirmBody:'Riavviare il browser del kiosk su "{{hostname}}"? Il display si oscurerà brevemente.',restartDaemon:"Riavvia daemon",restartDaemonConfirmTitle:"Riavviare il daemon Spoolbuddy?",restartDaemonConfirmBody:'Riavviare il daemon Spoolbuddy su "{{hostname}}"? Il dispositivo sarà offline per alcuni secondi.',reboot:"Riavvia",rebootConfirmTitle:"Riavviare il dispositivo?",rebootConfirmBody:'Riavviare "{{hostname}}"? Il dispositivo sarà offline per circa un minuto.',shutdown:"Spegni",shutdownConfirmTitle:"Spegnere il dispositivo?",shutdownConfirmBody:'Spegnere "{{hostname}}"? Sarà necessario un accesso fisico per riaccenderlo.',commandConfirm:"Conferma",commandQueued:"Comando in coda",commandError:"Invio comando non riuscito"}},notification:{printStarted:{title:"Stampa avviata",body:"{{printer}}: {{filename}} ha iniziato a stampare"},printCompleted:{title:"Stampa completata",body:"{{printer}}: {{filename}} completata con successo"},printFailed:{title:"Stampa fallita",body:"{{printer}}: {{filename}} fallita"},printStopped:{title:"Stampa interrotta",body:"{{printer}}: {{filename}} interrotta"},printProgress:{title:"Avanzamento stampa",body:"{{printer}}: {{filename}} al {{percent}}% completamento"},printerOffline:{title:"Stampante offline",body:"{{printer}} e offline"},printerError:{title:"Errore stampante",body:"{{printer}} – {{error}}"},filamentLow:{title:"Filamento in esaurimento",body:"{{printer}}: Filamento in esaurimento"},maintenanceDue:{title:"Manutenzione dovuta",body:"{{printer}}: {{items}} richiedono attenzione"}},errors:{generic:"Qualcosa e andato storto",networkError:"Errore di rete. Controlla la connessione.",notFound:"Non trovato",unauthorized:"Non autorizzato",serverError:"Errore server",validationError:"Controlla i dati inseriti",printerConnectionFailed:"Connessione alla stampante fallita",saveFailed:"Salvataggio modifiche fallito",deleteFailed:"Eliminazione fallita",loadFailed:"Caricamento dati fallito"},hmsErrors:{title:"Errori - {{name}}",noErrors:"Nessun errore",viewOnWiki:"Vedi su Bambu Lab Wiki",clearInstructions:"Cancella gli errori sulla stampante per rimuoverli qui.",clearErrors:"Cancella errori",clearSuccess:"Errori HMS cancellati",clearFailed:"Impossibile cancellare gli errori HMS"},mqttDebug:{title:"Log debug MQTT",searchPlaceholder:"Cerca topic o payload...",noMessages:"Nessun messaggio registrato",startLoggingHint:'Clicca "Avvia logging" per iniziare a catturare messaggi MQTT',noMessagesMatch:"Nessun messaggio corrisponde al filtro",adjustFilterHint:"Prova a modificare la ricerca o i filtri",incoming:"In ingresso",outgoing:"In uscita",loggingStopped:"Logging fermato",loggingActive:"Logging attivo - i messaggi si aggiornano automaticamente",startLogging:"Avvia logging",stopLogging:"Ferma logging",clearLog:"Pulisci log",topic:"Argomento",timestamp:"Timestamp",direction:"Direzione",all:"Tutti"},printerFiles:{title:"Gestore file",storageUsed:"Usato:",storageFree:"Libero:",filterPlaceholder:"Filtra file...",deleteButton:"Elimina",deleteFiles:"Elimina {{count}} file",deleteFileConfirm:'Eliminare "{{name}}"? Questa azione non può essere annullata.',deleteFilesConfirm:"Eliminare {{count}} file selezionati? Questa azione non può essere annullata.",noFiles:"Nessun file sulla stampante",loadingFiles:"Caricamento file...",failedToLoad:"Caricamento file fallito",toast:{filesDeleted:"Eliminati {{count}} file",deleteFailed:"Eliminazione fallita: {{error}}"}},confirm:{delete:"Sei sicuro di voler eliminare questo?",unsavedChanges:"Hai modifiche non salvate. Sei sicuro di voler uscire?",clearQueue:"Sei sicuro di voler svuotare la coda?"},login:{title:"Login Bambuddy",subtitle:"Accedi al tuo account",username:"Nome utente",usernamePlaceholder:"Inserisci il nome utente",usernameOrEmail:"Nome utente o email",usernameOrEmailPlaceholder:"Nome utente o @ Email",password:"Password",passwordPlaceholder:"Inserisci la password",signIn:"Accedi",signingIn:"Accesso in corso...",rememberMe:"Ricordami",forgotPassword:"Hai dimenticato la password?",loginSuccess:"Accesso riuscito",loginFailed:"Accesso fallito",enterCredentials:"Inserisci nome utente e password",enterEmail:"Inserisci il tuo indirizzo e-mail",oidcLoginFailed:"Accesso OIDC fallito",oidcErrors:{providerError:"Il provider di identità ha restituito un errore",missingParameters:"Parametri obbligatori mancanti nel callback OIDC",invalidState:"Lo stato OIDC non è valido o è già stato utilizzato",stateExpired:"La sessione OIDC è scaduta — riprovare",providerNotFound:"Provider OIDC non trovato",discoveryFailed:"Impossibile recuperare il documento di discovery OIDC",invalidDiscovery:"Il documento di discovery OIDC non è valido",networkError:"Errore di rete durante lo scambio di token OIDC",badResponse:"Risposta inattesa durante lo scambio di token OIDC",noIdToken:"Il provider OIDC non ha restituito un ID token",validationFailed:"La validazione del token OIDC non è riuscita",nonceMismatch:"Il nonce OIDC non corrisponde — possibile attacco di replay",missingSubClaim:"Il token OIDC è privo del claim sub",noLinkedAccount:"Nessun account locale è collegato a questa identità OIDC",accountInactive:"Il tuo account è inattivo",userResolutionFailed:"Impossibile risolvere il tuo account",internalError:"Si è verificato un errore interno durante il login OIDC",tokenExchangeFailed:"Lo scambio di token OIDC non è riuscito"},forgotPasswordTitle:"Password dimenticata",forgotPasswordMessage:"Se hai dimenticato la password, contatta il tuo amministratore di sistema per reimpostarla.",forgotPasswordEmailMessage:"Inserisci il tuo indirizzo email e ti invieremo una nuova password.",emailAddress:"Indirizzo email",emailPlaceholder:"tua.email@esempio.com",cancel:"Annulla",sending:"Invio...",sendResetEmail:"Invia email di reimpostazione",howToReset:"Come reimpostare la password:",resetStep1:"Contatta il tuo amministratore Bambuddy",resetStep2:"Chiedi di reimpostare la password in Gestione utenti",resetStep3:"Possono impostare una nuova password temporanea",resetStep4:"Accedi con la nuova password e cambiala in Impostazioni",gotIt:"Capito",twoFA:{title:"Autenticazione a due fattori",subtitle:"Il tuo account è protetto da 2FA. Inserisci il codice di verifica qui sotto.",methodAuthenticator:"App di autenticazione",methodEmail:"Codice via e-mail",methodBackup:"Codice di recupero",instructionsTotp:"Apri la tua app di autenticazione e inserisci il codice a 6 cifre per Bambuddy.",instructionsEmail:"Un codice a 6 cifre è stato inviato al tuo indirizzo e-mail. È valido per 10 minuti.",instructionsEmailNotSent:"Clicca il pulsante qui sotto per ricevere un codice di verifica via e-mail.",instructionsBackup:"Inserisci uno dei tuoi codici di recupero a 8 caratteri. Ogni codice può essere utilizzato una sola volta.",sendCodeButton:"Invia codice via e-mail",sendingCode:"Invio in corso...",resendCode:"Invia nuovamente il codice",codeLabel:"Codice di verifica",backupCodeLabel:"Codice di recupero",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"Verifica",verifyingButton:"Verifica in corso...",backToLogin:"← Torna alla pagina di accesso",orContinueWith:"oppure accedi con",signInWith:"Accedi con {{provider}}",enterCode:"Inserisci il codice di verifica",sendCodeFailed:"Invio del codice di verifica non riuscito",invalidCode:"Codice non valido. Riprova."},resetPassword:{title:"Imposta nuova password",subtitle:"Inserisci e conferma la nuova password qui sotto.",newPassword:"Nuova password",newPasswordPlaceholder:"Almeno 8 caratteri",confirmPassword:"Conferma password",confirmPasswordPlaceholder:"Ripeti la nuova password",saving:"Salvataggio…",submit:"Imposta nuova password",backToLogin:"Torna al login",passwordsDoNotMatch:"Le password non coincidono",passwordTooShort:"La password deve avere almeno 8 caratteri",resetFailed:"Reimpostazione non riuscita. Il link potrebbe essere scaduto."}},setup:{title:"Configurazione Bambuddy",subtitle:"Configura autenticazione per la tua istanza Bambuddy",enableAuth:"Abilita autenticazione",adminAccount:"Account admin",adminAccountDesc:"Se esistono già admin, l'autenticazione verrà abilitata usando gli account esistenti. Lascia i campi sotto vuoti per usare gli admin esistenti, oppure inserisci nuove credenziali per creare un nuovo utente admin.",adminUsername:"Nome utente admin",adminPassword:"Password admin",optionalIfAdminExists:"(opzionale se esistono admin)",adminUsernamePlaceholder:"Inserisci nome utente admin (opzionale)",adminPasswordPlaceholder:"Inserisci password admin (opzionale)",confirmPassword:"Conferma password",confirmPasswordPlaceholder:"Conferma password admin",settingUp:"Configurazione...",completeSetup:"Completa configurazione",toast:{authEnabledAdminCreated:"Autenticazione abilitata e utente admin creato",authEnabledExistingAdmins:"Autenticazione abilitata usando admin esistenti",setupCompleted:"Configurazione completata",enterBothCredentials:"Inserisci nome utente e password admin, oppure lascia entrambi vuoti per usare admin esistenti",passwordsDoNotMatch:"Le password non coincidono",passwordTooShort:"La password deve essere di almeno 6 caratteri"}},changePassword:{title:"Cambia password",currentPassword:"Password attuale",currentPasswordPlaceholder:"Inserisci password attuale",newPassword:"Nuova password",newPasswordPlaceholder:"Inserisci nuova password (min 6 caratteri)",confirmPassword:"Conferma nuova password",confirmPasswordPlaceholder:"Conferma nuova password",passwordsDoNotMatch:"Le password non coincidono",passwordTooShort:"La password deve essere di almeno 6 caratteri",changing:"Modifica in corso...",success:"Password cambiata con successo",failed:"Modifica password fallita"},plateAlert:{title:"Stampa in pausa!",message:"Oggetti rilevati sul piatto. La stampa è stata messa automaticamente in pausa. Svuota il piatto e riprendi la stampa.",understand:"Ho capito"},camera:{title:"Vista camera",invalidPrinterId:"ID stampante non valido",live:"Live",snapshot:"Istantanea",restartStream:"Riavvia stream",refreshSnapshot:"Aggiorna snapshot",fullscreen:"Schermo intero",exitFullscreen:"Esci da schermo intero",connectingToCamera:"Connessione alla camera...",capturingSnapshot:"Acquisizione snapshot...",connectionLost:"Connessione persa",connectionFailed:"Connessione camera fallita",reconnecting:"Riconnessione tra {{countdown}}s... (tentativo {{attempt}}/{{max}})",reconnectNow:"Riconnetti ora",cameraUnavailable:"Camera non disponibile",cameraUnavailableDesc:"Assicurati che la stampante sia accesa e connessa.",noCamera:"Nessuna camera disponibile",retry:"Riprova",cameraStream:"Stream camera",zoomOut:"Zoom indietro",zoomIn:"Zoom avanti",resetZoom:"Reimposta zoom",recording:"Registrazione",startRecording:"Avvia registrazione",stopRecording:"Ferma registrazione",chamberLight:"Accendi/Spegni luce camera",unavailable:"Telecamera non disponibile",diagnose:{button:"Diagnostica",modalTitle:"Diagnostica telecamera",running:"Diagnostica in corso...",runFailed:"Impossibile eseguire la diagnostica: {{error}}",retry:"Riesegui",stage:{tcp_reachable:"Raggiungibilità di rete",first_frame:"Acquisizione frame",live_stream_active:"Stream live attivo"},summary:{all_ok:"La telecamera funziona. La diagnostica ha completato tutte le fasi con successo.",live_stream_active_healthy:"La telecamera sta trasmettendo con frame recenti — nessun test necessario.",printer_unreachable:"La stampante non è raggiungibile. Verifica l'indirizzo IP, la connessione di rete e che la stampante sia accesa.",camera_port_closed:"La stampante risponde ma la porta della telecamera è chiusa. Assicurati che la modalità LAN e la modalità sviluppatore siano attive nelle impostazioni della stampante.",no_frame:"Connessione alla telecamera riuscita ma nessun frame ricevuto. Riprova o verifica che la telecamera sia abilitata nelle impostazioni della stampante.",unknown_failure:"Diagnostica della telecamera fallita per motivo sconosciuto. Controlla il log di supporto per i dettagli."},meta:{protocol:"Protocollo",port:"Porta",profile:"Profilo"}}},groups:{title:"Gestione gruppi",subtitle:"Gestisci gruppi permessi per controllo accesso",backToSettings:"Torna a Impostazioni",createGroup:"Crea gruppo",noPermission:"Non hai il permesso di accedere a questa pagina.",system:"Sistema",noDescription:"Nessuna descrizione",usersCount:"{{count}} utenti",permissionsCount:"{{count}} permessi",edit:"Modifica",delete:"Elimina",toast:{created:"Gruppo creato con successo",updated:"Gruppo aggiornato con successo",deleted:"Gruppo eliminato con successo",enterGroupName:"Inserisci un nome gruppo"},modal:{editGroup:"Modifica gruppo",createGroup:"Crea gruppo",cancel:"Annulla",saving:"Salvataggio...",creating:"Creazione...",saveChanges:"Salva modifiche"},form:{groupName:"Nome gruppo",groupNamePlaceholder:"Inserisci nome gruppo",systemGroupWarning:"I nomi dei gruppi di sistema non possono essere modificati",description:"Descrizione",descriptionPlaceholder:"Inserisci descrizione (opzionale)",permissions:"Permessi ({{count}} selezionati)"},deleteModal:{title:"Elimina gruppo",message:"Sei sicuro di voler eliminare questo gruppo? Gli utenti in questo gruppo perderanno questi permessi.",confirm:"Elimina gruppo"},editor:{title:"Modifica gruppo",createTitle:"Crea gruppo",search:"Cerca permessi...",selectAll:"Seleziona tutto",clearAll:"Deseleziona tutto",permissionsSelected:"{{count}} selezionati",noResults:"Nessun permesso corrisponde alla ricerca"}},users:{title:"Gestione utenti",subtitle:"Gestisci utenti e accesso alla tua istanza Bambuddy",backToSettings:"Torna a Impostazioni",createUser:"Crea utente",noPermission:"Non hai il permesso di accedere a questa pagina.",admin:"Amministratore",noGroups:"Nessun gruppo",active:"Attivo",inactive:"Inattivo",edit:"Modifica",delete:"Elimina",system:"Sistema",noGroupsAvailable:"Nessun gruppo disponibile",table:{username:"Nome utente",groups:"Gruppi",status:"Stato",actions:"Azioni"},toast:{created:"Utente creato con successo",updated:"Utente aggiornato con successo",deleted:"Utente eliminato con successo",fillRequired:"Compila tutti i campi obbligatori",passwordsDoNotMatch:"Le password non coincidono",passwordTooShort:"La password deve essere di almeno 6 caratteri",ldapProvisioned:'Utente LDAP "{{username}}" provisionato'},modal:{createUser:"Crea utente",editUser:"Modifica utente",cancel:"Annulla",creating:"Creazione...",saving:"Salvataggio...",saveChanges:"Salva modifiche",advancedAuthSubtitle:"con autenticazione avanzata",tabsAriaLabel:"Origine utente",localTab:"Locale",ldapTab:"LDAP",ldapSearchLabel:"Cerca nella directory",ldapSearchPlaceholder:"Digita un nome utente, nome o e-mail...",ldapMinChars:"Digita almeno 2 caratteri per cercare",ldapTypeToSearch:"Inizia a digitare per cercare nella directory LDAP",ldapSearching:"Ricerca nella directory...",ldapNoResults:"Nessun utente corrispondente nella directory",ldapSearchError:"Ricerca nella directory fallita. Verifica lo stato del server LDAP.",ldapAlreadyProvisioned:"Già provisionato",ldapSelectedLabel:"Selezionato",ldapProvision:"Provisiona utente",ldapProvisioning:"Provisioning...",ldapErrorProvision:"Provisioning fallito. Verifica lo stato del server LDAP e riprova."},form:{username:"Nome utente",usernamePlaceholder:"Inserisci nome utente",email:"E-mail",emailPlaceholder:"utente@esempio.com",password:"Password",passwordPlaceholder:"Inserisci password",confirmPassword:"Conferma password",confirmPasswordPlaceholder:"Conferma password",newPasswordPlaceholder:"Inserisci nuova password",confirmNewPasswordPlaceholder:"Conferma nuova password",leaveBlankToKeep:"lascia vuoto per mantenere attuale",groups:"Gruppi",optional:"opzionale",autoGeneratedPassword:"Una password sicura verrà generata automaticamente e inviata via email all'utente.",passwordManagedByAdvancedAuth:`La password è gestita dall'autenticazione avanzata. Usa "Reimposta password" per inviare una nuova password all'utente via email.`,resetPassword:"Reimposta password",resettingPassword:"Reimpostazione password..."},deleteModal:{title:"Elimina utente",message:"Sei sicuro di voler eliminare questo utente? Questa azione non può essere annullata.",confirm:"Elimina utente"}},streamOverlay:{title:"Overlay stream",invalidPrinterId:"ID stampante non valido",cameraStream:"Stream camera",progress:"Avanzamento",eta:"ETA",printerIdle:"Stampante inattiva",printerOffline:"Stampante offline",status:{printing:"In stampa",paused:"In pausa",finished:"Completata",failed:"Fallita",idle:"Inattiva",unknown:"Sconosciuto"}},profiles:{title:"Profili",subtitle:"Gestisci preset slicer e calibrazioni pressure advance",tabs:{bambuCloud:"Bambu Cloud",orcaCloud:"Orca Cloud",local:"Profili locali",kprofiles:"Profili K"},orcaCloud:{connectedAs:"Connesso come",logout:"Disconnetti",noLogoutPermission:"Non hai il permesso di disconnetterti",noConnectPermission:"Non hai il permesso di connetterti a Orca Cloud",retry:"Riprova",back:"Usa un altro metodo di accesso",connect:{title:"Connetti a Orca Cloud",description:"Accedi al tuo account Orca Cloud per sincronizzare i profili dello slicer in Bambuddy."},providers:{google:"Accedi con Google",apple:"Accedi con Apple",github:"Accedi con GitHub",email:"Accedi con email e password"},password:{title:"Accedi con email e password",email:"Email",emailPlaceholder:"tu@esempio.it",password:"Password",submit:"Accedi"},paste:{title:"Completa l'accesso",step1:"Si è aperta una nuova scheda con la pagina di accesso di Orca Cloud. Accedi con il tuo account Orca.",step2:`Il browser verrà reindirizzato a un URL "localhost" che non riuscirà a caricarsi. È normale — è proprio quell'URL che ci serve.`,step3:"Copia l'intero URL dalla barra degli indirizzi del browser e incollalo qui sotto.",signInUrl:"Se la scheda di accesso non si è aperta, clicca su questo URL:",label:"Incolla qui l'URL di callback",placeholder:"http://localhost:41172/callback?code=...&state=...",submit:"Completa la connessione"},profiles:{title:"I tuoi profili Orca Cloud ({{count}})",refresh:"Aggiorna",empty:"Nessun profilo trovato nel tuo account Orca Cloud."},toast:{connected:"Connesso a Orca Cloud come {{email}}",disconnected:"Disconnesso da Orca Cloud"},errors:{startFailed:"Impossibile avviare l'accesso a Orca Cloud.",finishFailed:"Impossibile completare l'accesso a Orca Cloud.",passwordFailed:"Impossibile accedere con quell'email e password.",passwordEmpty:"Inserisci sia l'email che la password.",emptyPaste:"Incolla l'URL di callback dal tuo browser.",noCode:"Questo URL non sembra un callback di Orca Cloud (manca il parametro code). Copia l'URL completo dalla barra degli indirizzi."}},localProfiles:{title:"Profili locali",subtitle:"Importa e gestisci preset slicer da OrcaSlicer",import:"Importa profili",importDesc:"Trascina file .bbscfg, .bbsflmt, .orca_filament, .zip o .json qui",importing:"Importazione...",search:"Cerca preset locali...",noPresets:"Nessun preset locale ancora",noSearchResults:"Nessun preset corrisponde alla ricerca",badge:"Locale",edit:"Modifica",delete:"Elimina",cancel:"Annulla",deleteConfirmTitle:"Elimina preset",deleteConfirm:"Sei sicuro di voler eliminare questo preset? Questa azione non può essere annullata.",source:"Fonte",inheritsFrom:"Eredita da",filamentType:"Tipo",vendor:"Produttore",compatiblePrinters:"Stampanti",nozzleTemp:"Temp. ugello",cost:"Costo",density:"Densità",pressureAdvance:"Pressure Advance",filament:"Filamento",process:"Processo",printer:"Stampante",toast:{importSuccess:"{{count}} preset importati",importSkipped:"{{count}} preset saltati (duplicati)",importError:"{{count}} errori durante l'importazione",deleted:"Preset eliminato",updated:"Preset aggiornato"}},connectedAs:"Connesso come",logout:"Esci",noLogoutPermission:"Non hai il permesso di disconnetterti",failedToLoad:"Caricamento profili fallito",retry:"Riprova",time:{justNow:"Proprio ora",minsAgo:"{{count}}m fa",hoursAgo:"{{count}}h fa",daysAgo:"{{count}}g fa"},toast:{loggedOut:"Disconnesso"},login:{title:"Connetti a Bambu Cloud",subtitle:"Sincronizza i preset del slicer tra dispositivi",email:"E-mail",password:"Password",region:"Regione",regionGlobal:"Globale",regionChina:"Cina",verificationCode:"Codice di verifica",totpCode:"Codice autenticatore",checkEmail:"Controlla la tua email ({{email}}) per un codice a 6 cifre",enterTotpHint:"Inserisci il codice a 6 cifre dalla tua app autenticatore",accessToken:"Token di accesso",accessTokenHint:"Incolla il tuo access token Bambu Cloud. Gli account della regione Cina devono usare questa via (vincolati al numero di telefono — login via e-mail non disponibile). Il wiki spiega come recuperare il token dai cookie di MakerWorld.",back:"Indietro",loginButton:"Accedi",verifyButton:"Verifica",setTokenButton:"Imposta token",useToken:"Usa access token invece",useEmail:"Accedi con email invece",toast:{loggedIn:"Accesso riuscito",codeSent:"Codice di verifica inviato via email",enterTotp:"Inserisci il codice dalla tua app autenticatore",tokenSet:"Token impostato con successo"}},presets:{myPreset:"Il mio preset (modificabile)",duplicate:"Duplica",editable:"Modificabile",failedToLoadDetails:"Caricamento dettagli preset fallito",deleteConfirm:"Eliminare questo preset?",deleteWarning:'Questo eliminerà definitivamente "{{name}}" da Bambu Cloud. Questa azione non può essere annullata.',noDuplicatePermission:"Non hai il permesso di duplicare preset",noEditPermission:"Non hai il permesso di modificare preset",noDeletePermission:"Non hai il permesso di eliminare preset",types:{filament:"Preset filamento",printer:"Preset stampante",process:"Preset processo"},toast:{deleted:"Preset eliminato",created:"Preset creato",updated:"Preset aggiornato",duplicated:"Preset duplicato",fieldAdded:'Campo "{{key}}" aggiunto',exported:"Preset esportato"},baseLabel:"Base: {{name}}",currentLabel:"Corrente: {{name}}",newPreset:"Nuovo preset",editPreset:"Modifica preset",duplicatePreset:"Duplica preset",createNewPreset:"Crea nuovo preset",customizeSettings:"Personalizza le impostazioni per il nuovo preset",compareWithBase:"Confronta con base",compare:"Confronta",basePreset:"Preset base",selectBasePreset:"Seleziona preset base...",presetName:"Nome preset",myCustomPreset:"Il mio preset personalizzato",inheritsFrom:"Deriva da",dropJsonToImport:"Rilascia JSON per importare",tabs:{common:"Comune",allFields:"Tutti i campi"},availableFields:"Campi disponibili",searchFieldsPlaceholder:"Cerca campi...",noMatchingFields:"Nessun campo corrispondente",allFieldsAdded:"Tutti i campi aggiunti",addCustomField:"Aggiungi campo personalizzato",yourOverrides:"Le tue override",noOverridesYet:"Nessun override ancora",clickFieldsToAdd:"Clicca i campi a sinistra per aggiungerli",saveAsTemplate:"Salva come template",jsonTip:"Suggerimento: trascina e rilascia un file .json ovunque in questa modale per importare impostazioni"},cloudView:{searchPlaceholder:"Cerca preset...",templates:"Template",refresh:"Aggiorna",newPreset:"Nuovo preset",clearFilters:"Pulisci filtri",compareMode:"Modalita confronto",selectAnotherPreset:"Seleziona un altro preset {{type}}",clickTwoPresets:"Clicca due preset dello stesso tipo per confrontare",selectFirst:"1. Seleziona il primo",selectSecond:"2. Seleziona il secondo",compareNow:"Confronta ora",lastSynced:"Ultima sincronizzazione:",showingCount:"Mostrati {{showing}} di {{total}} preset",noPresetsFound:"Nessun preset trovato",columns:{filament:"Filamento",process:"Processo",printer:"Stampante"},noFilamentPresets:"Nessun preset filamento",noProcessPresets:"Nessun preset processo",noPrinterPresets:"Nessun preset stampante",filters:{type:"Tipo",owner:"Proprietario",printer:"Stampante",nozzle:"Ugello",filament:"Filamento",layer:"Layer",all:"Tutti",myPresets:"I miei preset",builtIn:"Integrati",process:"Processo"},noTemplatesPermission:"Non hai il permesso di gestire i template",noRefreshPermission:"Non hai il permesso di aggiornare i profili",noCreatePermission:"Non hai il permesso di creare preset"},templates:{title:"Template rapidi",noTemplates:"Nessun template ancora",createFirst:"Crea template dall'editor preset",typeFilter:"Tipo:",deleteTitle:"Elimina template",deleteWarning:"Questa azione non può essere annullata",deleteConfirm:'Sei sicuro di voler eliminare "{{name}}"?',namePlaceholder:"Nome template",descriptionPlaceholder:"Descrizione",settingsJson:"Impostazioni (JSON)",fieldsCount:"{{count}} campi",shownInModals:"Mostrati nelle modali",hiddenInModals:"Nascosti nelle modali",apply:"Applica",toast:{deleted:"Template eliminato",updated:"Template aggiornato",created:"Template creato",applied:"Template applicato"}}},support:{debugLoggingActive:"Log debug attivo",manageLogs:"Gestisci",collectItem7:"Connettività stampante e versioni firmware",collectItem8:"Stato integrazioni (Spoolman, MQTT, HA)",collectItem9:"Interfacce di rete (solo subnet)",collectItem10:"Versioni dei pacchetti Python",collectItem11:"Controlli di integrità del database",collectItem12:"Dettagli dell'ambiente Docker",bundleGenerating:"Generazione del pacchetto...",bundleStepConnection:"Controlli di connettività delle stampanti in corso",bundleStepVirtualPrinters:"Controlli di configurazione delle stampanti virtuali in corso",bundleStepLogScan:"Analisi dei log recenti per problemi noti",bundleStepBuild:"Creazione dello ZIP del pacchetto di supporto"},fileManager:{title:"Gestore file",subtitle:"Organizza e gestisci i tuoi file di stampa",uploadFiles:"Carica file",newFolder:"Nuova cartella",folderName:"Nome cartella",folderNamePlaceholder:"es., Parti funzionali",renameFile:"Rinomina file",renameFolder:"Rinomina cartella",invalidFilenameChar:'Il carattere "{{char}}" non è consentito nei nomi dei file di stampa. La scheda SD della stampante rifiuta: < > : " / \\ | ? *',moveFiles:"Sposta {{count}} file",rootNoFolder:"Root (nessuna cartella)",current:"corrente",linkFolder:"Collega cartella",linkFolderDescription:'Collega "{{name}}" a un progetto o archivio per accesso rapido.',project:"Progetto",archive:"Archivio",noProjectsFound:"Nessun progetto trovato",noArchivesFound:"Nessun archivio trovato",unlink:"Scollega",link:"Collega",dragDropFiles:"Trascina e rilascia file qui",dropFilesHere:"Rilascia file qui",orClickToBrowse:"oppure clicca per sfogliare",allFileTypesSupported:"Tutti i tipi di file supportati. I file ZIP saranno estratti.",zipFilesDetected:"File ZIP rilevati",zipExtractOptions:"I file ZIP saranno estratti. Scegli come gestire la struttura cartelle:",preserveZipStructure:"Mantieni struttura cartelle dal ZIP",createFolderFromZip:"Crea cartella dal nome ZIP",stlThumbnailGeneration:"Generazione miniature STL",zipMayContainStl:"I file ZIP possono contenere STL. Le miniature possono essere generate durante l'estrazione.",thumbnailsCanBeGenerated:"Le miniature possono essere generate per file STL. I modelli grandi possono richiedere più tempo.",generateThumbnailsForStl:"Genera miniature per file STL",threemfDetected:"File 3MF rilevati",threemfExtractionInfo:"Modello stampante, materiale, colore e impostazioni stampa saranno estratti automaticamente dai file 3MF.",willBeExtracted:"Sara estratto",filesExtracted:"{{count}} file estratti",uploadComplete:"Caricamento completato: {{succeeded}} riusciti",uploadFailed:"Caricamento fallito",zipFilesFailed:"{{count}} file falliti",uploading:"Caricamento...",changeLink:"Cambia collegamento...",linkTo:"Collega a...",linkToProjectOrArchive:"Collega a progetto o archivio",addToQueue:"Aggiungi alla coda",schedulePrint:"Pianifica",generateThumbnail:"Genera miniatura",generateThumbnails:"Genera miniature",generateThumbnailsForMissing:"Genera miniature per STL senza miniatura",gridView:"Vista griglia",listView:"Vista elenco",lowDiskSpaceWarning:"Avviso spazio disco basso",lowDiskSpaceDetails:"Solo {{free}} liberi su {{total}} totali. La soglia e {{threshold}} GB nelle impostazioni.",files:"File",folders:"Cartelle",size:"Dimensione",free:"Libero",allFiles:"Tutti i file",allExternal:"Esterni",externalIsEmpty:"Nessun file esterno",externalEmptyDescription:"I file delle tue cartelle esterne collegate appariranno qui.",wrap:"A capo",enableTextWrapping:"Abilita a capo testo",disableTextWrapping:"Disabilita a capo testo",collapse:"Comprimi",collapseFoldersByDefault:"Comprimi le cartelle per impostazione predefinita",expandFoldersByDefault:"Espandi le cartelle per impostazione predefinita",dragToResizeTooltip:"Trascina per ridimensionare, doppio clic per reset",searchFiles:"Cerca file...",allTypes:"Tutti i tipi",prints:"Stampe",ascending:"Crescente",descending:"Decrescente",resultsCount:"{{showing}} di {{total}} file",selectAll:"Seleziona tutto",deselectAll:"Deseleziona tutto",selected:"{{count}} selezionati",adding:"Aggiunta...",loadingFiles:"Caricamento file...",folderIsEmpty:"La cartella e vuota",noFilesYet:"Nessun file ancora",folderEmptyDescription:"Carica file o sposta file in questa cartella per iniziare.",noFilesDescription:"Carica file per iniziare a organizzare i file di stampa.",noMatchingFiles:"Nessun file corrispondente",noMatchingFilesDescription:"Nessun file corrisponde ai criteri di ricerca o filtro.",clearFilters:"Pulisci filtri",printedCount:"Stampato {{count}}x",uploadedBy:"Caricato da",deleteFolder:"Elimina cartella",deleteFile:"Elimina file",deleteFilesCount:"Elimina {{count}} file",deleteFolderConfirm:"Sei sicuro di voler eliminare questa cartella? Tutti i file dentro saranno eliminati.",deleteFileConfirm:"Sei sicuro di voler eliminare questo file?",deleteFilesConfirm:"Sei sicuro di voler eliminare {{count}} file selezionati? Questa azione non può essere annullata.",deleting:"Eliminazione...",noPermissionRenameFolder:"Non hai il permesso di rinominare cartelle",noPermissionLinkFolder:"Non hai il permesso di collegare cartelle",noPermissionDeleteFolder:"Non hai il permesso di eliminare cartelle",noPermissionPrint:"Non hai il permesso di stampare",noPermissionSlice:"Non hai il permesso di sezionare i file",noPermissionAddToQueue:"Non hai il permesso di aggiungere alla coda",noPermissionDownload:"Non hai il permesso di scaricare file",noPermissionRenameFile:"Non hai il permesso di rinominare questo file",noPermissionGenerateThumbnail:"Non hai il permesso di generare miniature",noPermissionDeleteFile:"Non hai il permesso di eliminare questo file",noPermissionCreateFolder:"Non hai il permesso di creare cartelle",noPermissionUpload:"Non hai il permesso di caricare file",noPermissionMoveFiles:"Non hai il permesso di spostare file",noPermissionDeleteFiles:"Non hai il permesso di eliminare file",linkExternal:"Collega esterno",linkExternalFolder:"Collega cartella esterna",linkExternalFolderDescription:"Monta una directory host (NAS, USB, condivisione di rete) nel File Manager. I file non vengono copiati — vengono letti direttamente dal percorso originale.",externalFolderNamePlaceholder:"es. Stampe NAS",externalPath:"Percorso host",externalPathHelp:"Percorso assoluto della directory sull'host Docker. Deve essere montato come bind nel container.",readOnly:"Sola lettura",readOnlyHelp:"impedisce caricamenti e cancellazioni",showHiddenFiles:"Mostra file nascosti (file punto)",externalFolder:"Cartella esterna",scanFolder:"Scansiona",toast:{folderCreated:"Cartella creata",folderDeleted:"Cartella eliminata",fileDeleted:"File eliminato",filesDeleted:"Eliminati {{count}} file",filesMoved:"File spostati",folderLinked:"Cartella collegata",folderUnlinked:"Cartella scollegata",externalFolderLinked:"Cartella esterna collegata e scansionata",folderScanned:"Scansione completata: {{added}} aggiunti, {{removed}} rimossi",addedToQueue:"Aggiunti {{count}} file alla coda",addedToQueuePartial:"Aggiunti {{added}} file, {{failed}} falliti",failedToAddToQueue:"Aggiunta file fallita: {{error}}",fileRenamed:"File rinominato",folderRenamed:"Cartella rinominata",thumbnailsGenerated:"Generate {{count}} miniature",thumbnailsGeneratedPartial:"Generate {{succeeded}} miniature, {{failed}} fallite",noStlMissingThumbnails:"Nessun file STL senza miniature",failedToGenerateThumbnails:"Generazione miniature fallita: {{error}}",thumbnailGenerated:"Miniatura generata",failedToGenerateThumbnail:"Generazione miniatura fallita: {{error}}"}},projects:{title:"Progetti",subtitle:"Organizza e traccia i tuoi progetti di stampa 3D",newProject:"Nuovo progetto",editProject:"Modifica progetto",deleteProject:"Elimina progetto",projectName:"Nome progetto",description:"Descrizione",noProjects:"Nessun progetto ancora",noProjectsFiltered:"Nessun progetto {{status}}",noProjectsFilteredHelp:"Non hai progetti {{status}}. I progetti appariranno qui quando il loro stato cambia.",createFirst:"Crea il tuo primo progetto per organizzare stampe correlate, tracciare progressi e gestire i tuoi build.",createFirstButton:"Crea il tuo primo progetto",create:"Crea",files:"File",prints:"Stampe",plates:"piatti",parts:"parti",lastModified:"Ultima modifica",deleteConfirm:"Sei sicuro di voler eliminare questo progetto? Archivi e elementi in coda saranno scollegati ma non eliminati.",addFiles:"Aggiungi file",removeFile:"Rimuovi file",viewDetails:"Vedi dettagli",namePlaceholder:"es., Build Voron 2.4",descriptionPlaceholder:"Descrizione opzionale...",urlLabel:"URL",urlPlaceholder:"https://makerworld.com/...",urlInvalid:"L'URL deve iniziare con http:// o https://",openExternalUrl:"Apri URL del progetto",coverImageLabel:"Immagine di copertina",coverImageAlt:"Immagine di copertina del progetto",coverImageUpload:"Carica",coverImageReplace:"Sostituisci",coverImageRemove:"Rimuovi",color:"Colore",targetPlates:"Piatti target",targetPlatesPlaceholder:"es., 25",targetPlatesHelp:"Numero di job di stampa",targetParts:"Parti target",targetPartsPlaceholder:"es., 150",targetPartsHelp:"Totale oggetti necessari",tagsLabel:"Tag (separati da virgola)",tagsPlaceholder:"es., voron, funzionale, regalo",dueDate:"Data scadenza",priority:"Priorita",priorityLow:"Bassa",priorityNormal:"Normale",priorityHigh:"Alta",priorityUrgent:"Urgente",statusActive:"Attivo",statusCompleted:"Completato",statusArchived:"Archiviato",done:"Fatto",completed:"completato",failed:"fallito",inQueue:"in coda",noPrintsYet:"Nessuna stampa ancora",printJobs:"Job di stampa (piatti)",partsPrinted:"Parti stampate",failedParts:"Parti fallite",import:"Importa",export:"Esporta",importProject:"Importa progetto",exportAll:"Esporta tutti i progetti",loading:"Caricamento progetti...",noEditPermission:"Non hai il permesso di modificare progetti",noDeletePermission:"Non hai il permesso di eliminare progetti",noCreatePermission:"Non hai il permesso di creare progetti",noImportPermission:"Non hai il permesso di importare progetti",noExportPermission:"Non hai il permesso di esportare progetti",toast:{created:"Progetto creato",updated:"Progetto aggiornato",deleted:"Progetto eliminato",imported:"Progetto importato",multipleImported:"{{count}} progetti importati",importFailed:"Import fallito",exported:"Progetti esportati (solo metadati)"}},projectDetail:{notFound:"Progetto non trovato",backToProjects:"Torna a Progetti",export:"Esporta",exportProject:"Esporta progetto",noExportPermission:"Non hai il permesso di esportare progetti",noEditPermission:"Non hai il permesso di modificare progetti",partOf:"Parte di:",priorityLabel:"Priorita:",noPrints:"Nessuna stampa in questo progetto ancora",status:{active:"Attivo",completed:"Completato",archived:"Archiviato"},priority:{low:"Bassa",normal:"Normale",high:"Alta",urgent:"Urgente"},dueDate:{overdue:"Scaduto",today:"Scade oggi",daysLeft:"{{count}} giorni rimanenti"},progress:{platesProgress:"Avanzamento piatti",partsProgress:"Avanzamento parti",printJobs:"job di stampa",parts:"parti",percentComplete:"{{percent}}% completato",remaining:"{{count}} rimanenti"},stats:{printJobs:"Job di stampa",total:"totale",failed:"{{count}} falliti",partsPrinted:"{{count}} parti stampate",printTime:"Tempo di stampa",filamentUsed:"Filamento usato"},cost:{title:"Tracciamento costi",filamentCost:"Costo filamento",energy:"Energia",totalCost:"Costo totale",total:"Totale",includesBom:"incl. distinta materiali",budget:"Budget",remaining:"Rimanente"},subProjects:{title:"Sotto-progetti ({{count}})"},notes:{title:"Note",noEditPermission:"Non hai il permesso di modificare le note",placeholder:"Aggiungi note su questo progetto...",empty:"Nessuna nota ancora. Clicca Modifica per aggiungere note."},files:{title:"File",linkFolders:"Collega cartelle dal Gestore file",forQuickAccess:"a questo progetto per accesso rapido.",fileCount:"{{count}} file",empty:"Nessuna cartella collegata. Vai a Gestore file e collega una cartella a questo progetto.",noFiles:"Nessun file in questa cartella.",print:"Stampa ora",addToQueue:"Aggiungi alla coda"},bom:{title:"Distinta materiali",acquired:"{{completed}}/{{total}} acquisiti",showAll:"Mostra tutti",hideDone:"Nascondi completati",addPart:"Aggiungi parte",noAddPermission:"Non hai il permesso di aggiungere parti",partNamePlaceholder:"Nome parte (es., viti M3x8)",partName:"Nome parte",qty:"Qta",price:"Prezzo ({{currency}})",sourcingUrlPlaceholder:"URL fornitura (opzionale)",remarksPlaceholder:"Note (opzionale)",deletePart:"Elimina parte",deleteConfirm:'Sei sicuro di voler eliminare "{{name}}"?',noUpdatePermission:"Non hai il permesso di aggiornare parti",noEditPermission:"Non hai il permesso di modificare parti",noDeletePermission:"Non hai il permesso di eliminare parti",totalCost:"Costo totale:",empty:"Nessuna parte nella distinta materiali. Aggiungi hardware, elettronica o altri componenti da reperire."},timeline:{title:"Timeline attivita",empty:"Nessuna attivita ancora."},template:{saveAsTemplate:"Salva come template",noCreatePermission:"Non hai il permesso di creare template"},queue:{title:"Coda",viewAll:"Vedi tutto",printing:"{{count}} in stampa",queued:"{{count}} in coda"},prints:{title:"Stampe ({{count}})"},toast:{projectUpdated:"Progetto aggiornato",partAdded:"Parte aggiunta",partRemoved:"Parte rimossa",exportFailed:"Export fallito",projectExported:"Progetto esportato",templateCreated:"Template creato"}},system:{title:"Informazioni sistema",version:"Versione",uptime:"Tempo attivo",cpuUsage:"Uso CPU",memoryUsage:"Uso memoria",diskUsage:"Uso disco",networkInfo:"Info rete",logs:"Log",debugMode:"Modalita debug",enableDebug:"Abilita log debug",disableDebug:"Disabilita log debug",downloadLogs:"Scarica log",clearLogs:"Cancella log",dockerInfo:"Info Docker",containerName:"Nome container",imageName:"Nome immagine",platform:"Piattaforma",architecture:"Architettura"},library:{title:"Libreria filamenti",addFilament:"Aggiungi filamento",editFilament:"Modifica filamento",deleteFilament:"Elimina filamento",vendor:"Produttore",material:"Materiale",color:"Colore",kFactor:"Fattore K",temperature:"Temperatura",noFilaments:"Nessun filamento in libreria",deleteConfirm:"Sei sicuro di voler eliminare questo filamento?",importFromPrinter:"Importa da stampante",exportToFile:"Esporta su file"},slice:{title:"Slicing modello",action:"Slice",actionAll:"Slicia tutti i {{count}} piatti",actionAllTitle:"Slicia tutti i piatti in un unico output multi-piatto (un solo archivio). La selezione del filamento copre ogni slot definito dal progetto.",allPlatesToggle:"Slicia tutti i {{count}} piatti",slicing:"Slicing…",printer:"Profilo stampante",process:"Profilo processo",filament:"Profilo filamento",filamentSlot:"Filamento {{index}} ({{type}})",selectPreset:"— Seleziona un preset —",loadingPresets:"Caricamento preset…",analyzingPlateFilaments:"Analisi filamenti del piano…",analyzingPlateFilamentsHint:"Slicing di anteprima per scoprire quali slot AMS usa questo piano. In cache dopo — la riapertura è istantanea.",previewToast:"Analisi di {{name}} – {{elapsed}}",previewWithProgress:"Analisi di {{name}} – {{stage}} ({{percent}}%) – {{elapsed}}",notUsedByPlate:"— non usato da questo piano",noPresetsForSlot:"Nessun preset disponibile",otherPrinters:"Altre stampanti",presetsLoadFailed:"Caricamento preset fallito. Apri Impostazioni → Profili per importarli prima.",refreshPresets:"Aggiorna",refreshPresetsTitle:"Aggiorna i preset — recupera gli elenchi più recenti dal cloud e dai bundle (da usare dopo aver eliminato un preset in Bambu Studio o Bambu Handy)",allPresetsRequired:"Tutti i preset devono essere selezionati",bundle:"Bundle slicer",bundleNone:"— Nessuno (scegli i preset singolarmente) —",bundleAllRequired:"Devi scegliere il processo del bundle e ogni slot filamento",enqueuing:"Invio lavoro di slicing…",queued:"In coda…",failed:"Slicing fallito. Controlla i log del sidecar.",startedToast:"Slicing di {{name}} in background…",queuedToast:"In coda: {{name}} – {{elapsed}}",runningToast:"Slicing {{name}} – {{elapsed}}",runningWithProgress:"{{name}} – {{stage}} ({{percent}}%) – {{elapsed}}",runningWithProgressMultiPlate:"Piatto {{plateIndex}} di {{plateCount}} • {{name}} – {{stage}} ({{percent}}%) – {{elapsed}}",completedToast:"{{name}} sezionato",failedTitle:"Slicing fallito",failedToast:"Slicing di {{name}} fallito: {{detail}}",tier:{local:"Importato",cloud:"Bambu Cloud",orcaCloud:"Orca Cloud",standard:"Standard"},cloud:{notAuthenticated:"Accedi a Bambu Cloud (Impostazioni → Profili → Bambu Cloud) per vedere i preset cloud.",expired:"Sessione Bambu Cloud scaduta – accedi di nuovo per aggiornare i preset cloud.",unreachable:"Bambu Cloud non è raggiungibile. I preset locali e standard funzionano ancora."},orcaCloud:{notAuthenticated:"Accedi a Orca Cloud (Profili → Orca Cloud) per vedere i tuoi preset Orca.",expired:"Sessione Orca Cloud scaduta — accedi di nuovo per aggiornare i tuoi preset Orca.",unreachable:"Orca Cloud non è raggiungibile in questo momento. Gli altri preset continuano a funzionare."},bedType:{label:"Piano di stampa",auto:"Auto (usa preset di processo)",coolPlate:"Cool Plate",coolPlateSuperTack:"Cool Plate SuperTack",engineering:"Engineering Plate",highTemp:"High Temp Plate",texturedPEI:"Textured PEI Plate",smoothPEI:"Smooth PEI Plate"}},spoolman:{title:"Integrazione Spoolman",enabled:"Spoolman abilitato",url:"URL Spoolman",connected:"Connesso",disconnected:"Non connesso",testConnection:"Testa connessione",sync:"Sincronizza",syncing:"Sincronizzazione...",lastSync:"Ultima sincronizzazione",linkToSpoolman:"Collega a Spoolman",openInSpoolman:"Apri in Spoolman",unlinkSpool:"Scollega bobina",unlinkConfirmTitle:"Rimuovere bobina?",unlinkConfirmMessage:"Questo rimuoverà la bobina da questo slot. I dati della bobina stessa rimarranno invariati.",selectSpool:"Seleziona bobina",noUnlinkedSpools:"Nessuna bobina disponibile",linkSuccess:"Bobina assegnata con successo",linkFailed:"Impossibile assegnare la bobina",unlinkSuccess:"Bobina rimossa con successo",unlinkFailed:"Impossibile rimuovere la bobina",linkedSpool:"Bobina assegnata",spoolId:"ID bobina",fillSourceLabel:"(Spoolman)",weight:"Peso",remaining:"Rimanente",disableWeightSync:"Disabilita sync peso stimato AMS",disableWeightSyncDesc:"Non aggiornare la capacità rimanente dalle stime AMS. Usalo se preferisci il tracciamento di Spoolman rispetto alle stime AMS. Le nuove bobine useranno comunque la stima AMS come peso iniziale.",reportPartialUsage:"Segnala uso parziale per stampe fallite",reportPartialUsageDesc:"Quando una stampa fallisce o viene annullata, segnala il filamento stimato usato fino a quel punto in base all'avanzamento layer."},inventory:{title:"Inventario Bobine",subtitle:"Gestisci le tue bobine",spoolmanMixedContentTitle:"Spoolman non può essere caricato tramite HTTPS — contenuto misto bloccato dal browser",spoolmanMixedContentBody:"Bambuddy viene servito tramite HTTPS (dietro il tuo reverse proxy), ma l'URL di Spoolman è ancora HTTP. I browser bloccano il contenuto misto per motivi di sicurezza, quindi l'interfaccia Spoolman incorporata non può essere visualizzata. Anche Spoolman deve essere raggiungibile via HTTPS.",spoolmanMixedContentFixReverseProxy:"Metti Spoolman dietro lo stesso reverse proxy di Bambuddy (Traefik / Nginx / Caddy) in HTTPS, poi aggiorna l'URL di Spoolman nelle Impostazioni con il nuovo indirizzo HTTPS.",spoolmanMixedContentFixOpenNewTab:"Come alternativa, apri Spoolman in una nuova scheda via HTTP — le regole sul contenuto misto si applicano solo ai frame incorporati, una scheda autonoma funziona.",spoolmanOpenInNewTab:"Apri Spoolman in una nuova scheda",labels:{title:"Stampa etichette bobine",selectedCount:"{{count}} selezionato",pickSpools:"Scegli per quali bobine stampare le etichette:",searchPlaceholder:"Cerca per nome, marca o #ID",filterByMaterial:"Materiale:",allMaterials:"Tutto",selectVisible:"Seleziona tutti visibili ({{count}})",deselectVisible:"Deseleziona visibili",clearAll:"Cancella tutto",noSpoolsToShow:"Nessuna bobina da mostrare. Modifica il filtro e riprova.",noMatches:"Nessuna bobina corrisponde alla ricerca o al filtro corrente.",printOne:"Stampa etichetta per questa bobina",printLabels:"Stampa etichette…",bulkTitle:"Scegli le bobine da etichettare tra le {{count}} mostrate",noSpoolsTitle:"Nessuna bobina da etichettare",error:"Impossibile generare etichette: {{msg}}",sortBy:{label:"Ordina:",id:"Per ID",color:"Per colore"},templates:{amsHolderSmall:{label:"Supporto AMS — piccolo (74 × 33 mm)",hint:"Un'etichetta per pagina; corrisponde all'etichetta stampabile del modello MakerWorld 752566 (Porta-etichette filamento AMS)."},amsHolderLarge:{label:"Supporto AMS — grande (75 × 55 mm)",hint:"Un'etichetta per pagina; si adatta alla variante cartoncino del porta-etichette filamento AMS. Spazio sufficiente per campione colore, marca, materiale, ID e codice QR."},box40x30:{label:"Etichetta scatola (40 × 30 mm)",hint:"Una etichetta per pagina; misura comune DK/Brother, ideale per etichette di sacchetti filamento e contenitori."},box:{label:"Box label (62 × 29 mm)",hint:"Una etichetta per pagina; dimensionata per Brother PT/QL e piccole etichette Dymo."},averyL7160:{label:"Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)",hint:"Foglio formato UE; 21 etichette per pagina A4."},avery5160:{label:"Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)",hint:"Foglio formato US; 30 etichette per pagina Letter."}}},addSpool:"Aggiungi Bobina",editSpool:"Modifica Bobina",copySpool:"Copia Bobina",material:"Materiale",selectMaterial:"Seleziona materiale...",subtype:"Sottotipo",brand:"Marchio",searchBrand:"Cerca marchio...",useCustomBrand:'Usa "{{brand}}"',useCustomMaterial:"Usa materiale personalizzato: {{material}}",colorName:"Nome Colore",colorNamePlaceholder:"Bianco Giada, Rosso Fuoco...",color:"Colore",hexColor:"Colore Hex",pickColor:"Scegli colore personalizzato",labelWeight:"Peso da Etichetta",coreWeight:"Peso Bobina Vuota",searchSpoolWeight:"Cerca peso bobina...",weightUsed:"Utilizzato",currentWeight:"Peso Rimanente",measuredWeight:"Peso Misurato",spoolName:"Bobina",costPerKg:"Costo per kg",storageLocation:"Posizione di archiviazione",storageLocationPlaceholder:"es. Scaffale A, Cassetto 1",openInInventory:"Apri nell'inventario",measuredWeightError:"Il peso misurato deve essere compreso tra {{min}}g e {{max}}g.",slicerFilament:"Filamento Slicer",slicerFilamentName:"Nome Preset Slicer",slicerPreset:"Preset Slicer",searchPresets:"Cerca preset filamento...",selectedPreset:"Selezionato",noPresetsFound:"Nessun preset trovato",tempOverrides:"Override Temperatura",note:"Nota",notePlaceholder:"Eventuali note aggiuntive su questa bobina...",category:"Categoria",categoryPlaceholder:"es. Produzione, Prototipo, Cliente A",categoryNone:"Senza categoria",storageLocationNone:"Nessuna posizione impostata",lowStockThresholdOverride:"Soglia scorte basse (questa bobina)",lowStockThresholdOverrideHelp:"Lascia vuoto per usare la soglia globale ({{global}}%).",clearRfid:"Cancella tag RFID",rfidCleared:"Tag RFID cancellato",archive:"Archivia",restore:"Ripristina",noSpools:"Ancora nessuna bobina. Aggiungi la tua prima bobina per iniziare.",noAvailableSpools:"Nessuna bobina disponibile. Aggiungi una bobina al tuo inventario o rimuovine l'assegnazione da un altro slot.",kProfiles:"Profili K",addKProfile:"Aggiungi K-Profile",assignSpool:"Assegna Bobina",unassignSpool:"Scollega",assignSuccess:"Bobina assegnata e slot AMS configurato",assignFailed:"Assegnazione bobina fallita",selectSpool:"Seleziona una bobina da assegnare a questo slot",assigned:"Assegnato",assigning:"Assegnazione...",searchSpools:"Cerca bobine...",showAllSpools:"Mostra tutte le bobine",spoolmanSpools:"Bobine Spoolman",allMaterials:"Tutti i Materiali",filterByBrand:"Filtra per marchio...",showArchived:"Mostra archiviate",quickAdd:"Aggiunta rapida (Scorta)",quantity:"Quantità",stock:"Scorta",configured:"Configurata",spoolsCreated:"{{count}} bobine create",spoolsPartiallyCreated:"{{created}} di {{total}} bobine create (alcune non riuscite)",spoolCreated:"Bobina creata",spoolUpdated:"Bobina aggiornata",spoolDeleted:"Bobina eliminata",deepLinkSpoolNotFound:"Bobina non trovata",deepLinkFetchFailed:"Impossibile caricare la bobina — riprova",spoolArchived:"Bobina archiviata",spoolRestored:"Bobina ripristinata",kProfileSaveFailed:"Impossibile salvare le impostazioni del profilo K",syncWeightSpoolNotFound:"Bobina non trovata — potrebbe essere stata eliminata",syncWeightSpoolmanUnreachable:"Spoolman non è raggiungibile — riprovare più tardi",syncWeightFailed:"Sincronizzazione del peso non riuscita",spoolmanUnreachable:"Spoolman non è raggiungibile — riprovare più tardi",deleteSpoolNotFound:"Bobina non trovata — potrebbe essere già stata eliminata",deleteFailed:"Impossibile eliminare la bobina",archiveSpoolNotFound:"Bobina non trovata — potrebbe essere già stata eliminata",archiveFailed:"Impossibile archiviare la bobina",restoreSpoolNotFound:"Bobina non trovata — potrebbe essere già stata eliminata",restoreFailed:"Impossibile ripristinare la bobina",saveFailed:"Impossibile salvare le modifiche",tagClearFailed:"Impossibile cancellare il tag",deleteConfirm:"Sei sicuro di voler eliminare questa bobina? Questa azione non può essere annullata.",archiveConfirm:"Sei sicuro di voler archiviare questa bobina?",advancedSettings:"Impostazioni Avanzate",filamentInfoTab:"Info filamento",paProfileTab:"Profilo PA",filamentInfo:"Filamento",additional:"Aggiuntivo",loadingPresets:"Caricamento preset cloud...",cloudConnected:"Cloud connesso",cloudNotConnected:"Cloud non connesso (valori predefiniti)",recentColors:"Recenti",searchColors:"Cerca colori...",searchResults:"Risultati della ricerca",allColors:"Tutti i colori",commonColors:"Colori comuni",showLess:"Mostra meno",showAll:"Mostra tutto",noColorsFound:"Nessun colore corrisponde alla ricerca",noResults:"Nessun risultato trovato",extraColorsLabel:"Colori extra",extraColorsPlaceholder:"EC984C,#6CD4BC,A66EB9,D87694",extraColorsHint:"Incolla da 2 a 8 stop hex, separati da virgole. Visualizzato come sfumatura.",extraColorsInvalid:"Hex non validi ignorati: {{tokens}}",colorEffectLabel:"Effetto",colorEffect:{none:"Nessuno",sparkle:"Scintillante",wood:"Legno",marble:"Marmo",glow:"Bagliore",matte:"Opaco",silk:"Silk",galaxy:"Galassia",rainbow:"Arcobaleno",metal:"Metallo",translucent:"Traslucido",gradient:"Sfumatura",dualColor:"Bicolore",triColor:"Tricolore",multicolor:"Multicolore"},selectMaterialFirst:"Selezionare prima un materiale nella scheda Info filamento.",noPrintersConfigured:"Nessuna stampante configurata. Aggiungi stampanti per usare i profili PA.",matchingFilter:"Corrispondenti",anyBrand:"Qualsiasi marca",anyVariant:"Qualsiasi variante",autoSelect:"Selezione automatica",matches:"corrispondenze",match:"corrispondenza",noMatches:"Nessuna corrispondenza",connected:"Connessa",offline:"Offline",printerOffline:"La stampante è offline. Connetti per visualizzare i profili di calibrazione.",noKProfilesMatch:"Nessun profilo K corrisponde al filamento selezionato.",leftNozzle:"Ugello sinistro",rightNozzle:"Ugello destro",profilesSelected:"profili di calibrazione selezionati",totalInventory:"Inventario totale",totalConsumed:"Totale consumato",byMaterial:"Per materiale",inPrinter:"In stampante",lowStock:"Scorta bassa",sinceTracking:"Dall'inizio del tracciamento",resetConsumedCounter:"Azzera contatore",resetConsumedCounterTooltip:"Azzera il contatore di grammi consumati per questa bobina. Il peso rimanente non viene modificato.",resetConsumedCounterConfirm:"Azzerare il contatore di grammi consumati di questa bobina? Le stampe future ripartiranno da zero. La bobina, il calcolo del peso rimanente e le impostazioni non vengono modificati.",resetAllConsumedCounters:"Azzera tutti i contatori",resetAllConsumedCountersTooltip:"Azzera il contatore di grammi consumati su ogni bobina. I pesi rimanenti non vengono modificati.",resetAllConsumedCountersConfirm:'Azzerare il contatore di grammi consumati su tutte le {{count}} bobine (incluse quelle archiviate)? La statistica "Totale Consumato" verrà azzerata e le stampe future ripartiranno da zero. Bobine e pesi rimanenti restano invariati.',consumedCounterReset:"Contatore azzerato",allConsumedCountersReset:"Contatore azzerato per {{count}} bobina/e",resetConsumedCounterFailed:"Impossibile azzerare il contatore",loadedInAms:"Caricato in AMS/Est",remaining:"Rimanente",weightCheck:"Controllo Peso",lastWeighed:"Ultima pesatura",neverWeighed:"Mai pesato",search:"Cerca bobine...",showing:"Visualizzazione",to:"a",of:"di",show:"Mostra",spools:"bobine",spool:"bobina",page:"Pagina",noSpoolsMatch:"Nessun risultato trovato",noSpoolsMatchDesc:"Prova a modificare la ricerca o i filtri per trovare quello che cerchi.",active:"Attive",archived:"Archiviate",all:"Tutte",used:"Usato",new:"Nuovo",clearFilters:"Cancella filtri",table:"Tabella",cards:"Schede",net:"Netto",groupSimilar:"Raggruppa",groupedSpools:"{{count}} bobine identiche",groupedRows:"righe",columns:"Colonne",configureColumns:"Configura colonne",configureColumnsDesc:"Trascina per riordinare le colonne o usa le frecce. Attiva/disattiva la visibilità con l'icona dell'occhio.",visible:"visibili",reset:"Ripristina",cancel:"Annulla",applyChanges:"Applica modifiche",moveUp:"Sposta su",moveDown:"Sposta giù",hideColumn:"Nascondi colonna",showColumn:"Mostra colonna",linkToSpool:"Collega a bobina",tagLinked:"Tag collegato alla bobina",tagLinkFailed:"Impossibile collegare il tag",tagAlreadyLinked:"Tag già collegato a un'altra bobina",unknownTag:"Tag RFID sconosciuto rilevato",usageHistory:"Cronologia utilizzo",noUsageHistory:"Nessun utilizzo registrato",printName:"Nome stampa",weightConsumed:"Peso consumato",clearHistory:"Cancella",historyCleared:"Cronologia utilizzo cancellata",fillSourceLabel:"(Inv)",lowStockThresholdError:"La soglia deve essere tra 0.1 e 99.9",assignMismatchTitle:"Materiale non corrispondente",assignMismatchMessage:'Il materiale della bobina selezionata "{{spoolMaterial}}" non corrisponde al materiale del vassoio "{{trayMaterial}}" per {{location}}. Assegnare comunque?',assignMismatchConfirm:"Assegna comunque",assignPartialMismatchMessage:'Il materiale della bobina "{{spoolMaterial}}" è simile ma non corrisponde esattamente a "{{trayMaterial}}" in {{location}}. Vuoi procedere?',assignProfileMismatchMessage:'Il profilo della bobina "{{spoolProfile}}" non corrisponde al profilo del vassoio "{{trayProfile}}" in {{location}}. Vuoi procedere?',assignReconfigureNote:"Lo slot AMS verrà riconfigurato per utilizzare il profilo della bobina.",spoolmanFilamentCatalog:"Catalogo filamenti Spoolman",pickFromSpoolmanCatalog:"Scegli dal catalogo Spoolman…",spoolmanFilamentSelected:"Filamento selezionato dal catalogo Spoolman",spoolmanFilamentUnlinked:"Collegamento al catalogo filamenti rimosso",noSpoolmanFilaments:"Nessun filamento trovato nel catalogo Spoolman",spoolmanFilamentColorSwatch:"Colore del filamento",spoolWeightManagedBySpoolman:"Il peso della bobina vuota è gestito per tipo di filamento in Spoolman",spoolmanCatalogLoadFailed:"Impossibile caricare il catalogo Spoolman"},timelapse:{title:"Timelapse",create:"Crea timelapse",download:"Scarica",delete:"Elimina",preview:"Anteprima",frameRate:"Frame rate",quality:"Qualità",processing:"Elaborazione...",noTimelapses:"Nessun timelapse disponibile"},ams:{title:"AMS",slot:"Slot",empty:"Vuoto",emptySlot:"Slot vuoto",slotEmpty:"Vuoto",emptySlotReset:"Nessuna bobina assegnata",unknown:"Sconosciuto",humidity:"Umidità",temperature:"Temperatura",filamentType:"Tipo filamento",filamentColor:"Colore",remaining:"Rimanente",history:"Cronologia AMS",noHistory:"Nessuna cronologia disponibile",configureSlot:"Configura slot",externalSpool:"Bobina esterna",profile:"Profilo",kFactor:"Fattore K",fill:"Livello",configure:"Configura",used:"utilizzato",remainingUnit:"rimanente"},printModal:{title:"Avvia stampa",selectPrinter:"Seleziona stampante",selectPlate:"Seleziona piatto",filamentMapping:"Mappatura filamento",totalCost:"Costo totale:",slotRemainingShort:" - {{grams}}g rim.",printSettings:"Impostazioni stampa",bedLeveling:"Livellamento piatto",flowCalibration:"Calibrazione flusso",vibrationCalibration:"Calibrazione vibrazioni",layerInspection:"Ispezione primo layer",timelapse:"Timelapse",startPrint:"Avvia stampa",addToQueue:"Aggiungi alla coda",cancel:"Annulla",noPrintersAvailable:"Nessuna stampante disponibile",printerBusy:"Stampante occupata",printerOffline:"Stampante offline",sameTypeDifferentColor:"Stesso tipo, colore diverso",filamentTypeNotLoaded:"Tipo di filamento non caricato",openCalendar:"Apri calendario",leftNozzle:"L",rightNozzle:"R",leftNozzleTooltip:"Ugello sinistro",rightNozzleTooltip:"Ugello destro",filamentOverride:"Sostituzione filamento",filamentOverrideHint:"Sostituisci opzionalmente i filamenti per l'assegnazione basata sul modello. Lo scheduler abbinerà i filamenti selezionati invece dei valori 3MF originali.",originalFilament:"Originale",overrideWith:"Sostituisci con",resetToOriginal:"Ripristina originale",insufficientFilamentTitle:"Filamento insufficiente",insufficientFilamentMessage:"Alcune bobine assegnate hanno meno filamento rimanente di quanto necessario per questa stampa:",insufficientFilamentLine:"{{printer}} - {{slot}}: necessita di {{required}}g, rimanenti {{remaining}}g",printAnyway:"Stampa comunque",forceColorMatch:"Forza corrispondenza colore",staggerPrinterStarts:"Scaglionare avvii",staggerGroupSize:"Dimensione gruppo",staggerInterval:"Intervallo (min)",staggerPreview:"{{printers}} stampanti → {{groups}} gruppi di {{size}}, avvio ogni {{interval}} min",staggerLastGroup:"ultimo gruppo: {{count}}",staggerTotal:"totale: {{minutes}} min",staggerToPrinters:"Scagliona a {{count}} stampanti",gcodeInjection:"Inietta G-code auto-stampa"},backup:{includesEncryptionKey:"I backup locali includono il file della chiave di crittografia MFA (DATA_DIR/.mfa_encryption_key), quindi un backup ZIP è autonomo. Tratta lo ZIP come sensibile — chiunque abbia il file può decifrare i client secret OIDC e i segreti TOTP contenuti.",title:"Backup e ripristino",createBackup:"Crea backup",restoreBackup:"Ripristina backup",restoreDescription:"Sostituisci tutti i dati da un file di backup",downloadBackup:"Scarica backup",uploadBackup:"Carica backup",lastBackup:"Ultimo backup",autoBackup:"Backup automatico",backupNow:"Esegui backup ora",restoreWarning:"Avviso: il ripristino sovrascriverà tutti i dati attuali.",includeArchives:"Includi archivi",includeSettings:"Includi impostazioni",includeProfiles:"Includi profili",backupSuccess:"Backup creato con successo",restoreSuccess:"Backup ripristinato con successo",backupFailed:"Backup fallito",restoreFailed:"Ripristino fallito",restoreNote:"La stampante virtuale verrà fermata durante il ripristino",githubBackup:"Backup GitHub",enabled:"Abilitato",cloudLoginRequired:"Accesso Bambu Cloud richiesto. Accedi in Profili → Profili Cloud per abilitare il backup GitHub.",cloudLoginRequiredShort:"Accesso Cloud richiesto",githubDescription:"Sincronizza automaticamente i tuoi profili con un repository GitHub privato per backup e cronologia delle versioni.",repoIsPrivate:"Il repository è privato — è sicuro effettuare il backup.",repoIsPublicWarning:"Il repository è PUBBLICO. I backup di Bambuddy includono credenziali MQTT, token di Home Assistant, token di Prometheus, la tua e-mail Bambu Cloud e i codici di accesso alle stampanti tramite K-profile. Il salvataggio è bloccato finché non rendi privato il repository nelle impostazioni del tuo provider.",repoVisibilityUnknown:"Impossibile determinare la visibilità del repository. Bambuddy rifiuta di eseguire backup su qualsiasi target non confermato come privato; il salvataggio sarà bloccato.",repositoryUrl:"URL del repository",repoUrlPlaceholderGitHub:"https://github.com/username/repo-name",repoUrlPlaceholderGitea:"https://gitea.example.com/username/repo-name",repoUrlPlaceholderForgejo:"https://forgejo.example.com/username/repo-name",repoUrlPlaceholderGitLab:"https://gitlab.com/username/repo-name",allowInsecureHttp:"Consenti HTTP non sicuro",allowInsecureHttpHint:"Abilita per istanze self-hosted su reti private senza TLS",personalAccessToken:"Token di accesso personale",tokenSaved:"(salvato)",enterNewToken:"Inserisci un nuovo token per aggiornare",tokenHint:"Token a grana fine con permesso di lettura/scrittura dei contenuti",branch:"Branch",provider:"Provider Git",providerGitHub:"GitHub",providerGitLab:"GitLab",providerGitea:"Gitea",providerForgejo:"Forgejo",manualOnly:"Solo manuale",hourly:"Ogni ora",daily:"Giornaliero",weekly:"Settimanale",includeInBackup:"Includi nel backup",kProfiles:"K-Profili",kProfilesDescription:"Calibrazione dell'avanzamento pressione dalle stampanti connesse",noPrintersConnected:"Nessuna stampante connessa",printersConnected:"{{connected}}/{{total}} connesse",cloudProfiles:"Profili Cloud",cloudProfilesDescription:"Preset di filamento, stampante e processo da Bambu Cloud",appSettings:"Impostazioni App",appSettingsDescription:"Configurazione Bambuddy (database completo)",spoolInventory:"Inventario bobine",spoolInventoryDescription:"Bobine di filamento, cronologia utilizzo e tracciamento costi",printArchives:"Archivi di stampa",printArchivesDescription:"Metadati della cronologia di stampa (nessun file gcode/3MF)",lastBackupAt:"Ultimo backup:",noBackupsYet:"Nessun backup ancora",next:"Prossimo:",startingBackup:"Avvio del backup...",test:"Test",enableBackup:"Abilita backup",testConnection:"Testa connessione",enterRepoUrl:"Inserisci l'URL del repository",enterRepoAndToken:"Inserisci l'URL del repository e il token di accesso",repoRequired:"L'URL del repository è obbligatorio",tokenRequired:"Il token di accesso è obbligatorio",githubBackupEnabled:"Backup GitHub abilitato",tokenUpdated:"Token aggiornato",settingsSaved:"Impostazioni salvate",failedToSave:"Salvataggio fallito: {{message}}",backupCompleteFiles:"Backup completato - {{count}} file aggiornati",backupSkippedNoChanges:"Backup saltato - nessuna modifica",backupFailed2:"Backup fallito: {{message}}",clearedLogs:"{{count}} log eliminati",failedToClearLogs:"Eliminazione log fallita: {{message}}",history:"Cronologia",clear:"Cancella",date:"Data",status:"Stato",commit:"Commit",localBackup:"Backup locale",localBackupDescription:"Crea un backup completo dei tuoi dati Bambuddy includendo database, archivi, upload e tutti i file.",downloadBackupLabel:"Scarica backup",completeBackupZip:"Backup completo: database + tutti i file (ZIP)",download:"Scarica",preparingBackup:"Preparazione del backup...",creatingArchive:"Creazione dell'archivio di backup... Potrebbe richiedere del tempo per archivi di grandi dimensioni.",downloadingFile:"Download del file di backup...",backupDownloaded:"Backup scaricato con successo",failedToCreateBackup:"Creazione del backup fallita: {{message}}",restore:"Ripristina",restoreReplacesAll:"Il ripristino sostituisce tutti i dati.",restoreReplacesAllDetail:"Il database e i file attuali verranno completamente sostituiti. È necessario un riavvio dopo il ripristino.",restoreConfirmTitle:"Ripristina backup",restoreConfirmMessage:`Sei sicuro di voler ripristinare da "{{filename}}"? Questo sostituirà completamente il tuo database e tutti i file. L'applicazione dovrà essere riavviata dopo il ripristino.`,restoreConfirmButton:"Ripristina backup",uploadingFile:"Caricamento del file di backup...",backupRestoredRestart:"Backup ripristinato. Riavvia Bambuddy.",failedToRestore:"Ripristino del backup fallito. Controlla il formato del file.",reloadNow:"Ricarica ora",creatingBackup:"Creazione del backup",restoringBackup:"Ripristino del backup",preparing:"Preparazione...",processing:"Elaborazione...",doNotClosePage:"Non chiudere questa pagina e non navigare altrove. Questa operazione potrebbe richiedere diversi minuti per backup di grandi dimensioni.",restoring:"Ripristino in corso...",restoreComplete:"Ripristino completato",restoreFailed2:"Ripristino fallito",importSettings:"Importa impostazioni da un file di backup",pleaseWaitRestoring:"Attendere durante il ripristino dei dati",selectBackupFile:"Clicca per selezionare un file di backup (.json o .zip)",duplicateHandling:"Come funziona la gestione dei duplicati:",matchPrinters:"Stampanti",matchPrintersBy:"corrispondenza per numero di serie",matchSmartPlugs:"Smart Plug",matchSmartPlugsBy:"corrispondenza per indirizzo IP",matchNotificationProviders:"Provider di notifica",matchNotificationProvidersBy:"corrispondenza per nome",matchFilaments:"Filamenti",matchFilamentsBy:"corrispondenza per nome + tipo + marca",matchArchives:"Archivi",matchArchivesBy:"corrispondenza per hash del contenuto (sempre saltato)",matchPendingUploads:"Upload in sospeso",matchPendingUploadsBy:"corrispondenza per nome file",matchSettingsTemplates:"Impostazioni e modelli",matchSettingsTemplatesBy:"sempre sovrascritti",replaceExisting:"Sostituisci dati esistenti",keepExisting:"Mantieni dati esistenti",overwriteDescription:"Sovrascrivi gli elementi già esistenti con i dati del backup",keepDescription:"Ripristina solo gli elementi che non esistono ancora",overwriteCaution:"Attenzione:",overwriteWarning:"La sovrascrittura sostituirà le configurazioni attuali con i dati del backup. I codici di accesso delle stampanti non vengono mai sovrascritti per sicurezza.",cancel:"Annulla",processingBackup:"Elaborazione del file di backup...",itemsRestored:"Elementi ripristinati",itemsSkipped:"Elementi saltati",restored:"Ripristinati",skippedAlreadyExist:"Saltati (già esistenti)",filesCategory:"File (3MF, miniature, ecc.)",andMore:"...e altri {{count}}",newApiKeysGenerated:"Nuove chiavi API generate",keysShownOnce:"Queste chiavi vengono mostrate solo una volta. Copiale ora!",copy:"Copia",noDataFound:"Nessun dato da ripristinare trovato nel file di backup.",close:"Chiudi",scheduledBackup:"Backup pianificati",scheduledBackupDescription:"Crea automaticamente snapshot di backup secondo una pianificazione. La directory di output può essere montata su un NAS o storage esterno.",frequency:"Frequenza",backupTime:"Tempo",retention:"Conservazione",retentionDescription:"Numero di backup da conservare",outputPath:"Percorso di output",outputPathPlaceholder:"Predefinito: {{path}}",outputPathDescription:"Lasciare vuoto per la posizione predefinita",runNow:"Esegui ora",backupFiles:"File di backup",noScheduledBackups:"Nessun backup ancora",deleteBackup:"Elimina",deleteBackupConfirm:"Eliminare questo file di backup?",backupRunning:"Backup in corso...",scheduledBackupComplete:"Backup completato con successo",scheduledBackupFailed:"Backup fallito",nextBackup:"Prossimo backup",backupSize:"Dimensione",localTimeHint:"Ora locale ({{tz}})",defaultPathLabel:"Predefinito:",categories:{settings:"Impostazioni",notification_providers:"Provider di notifica",notification_templates:"Modelli di notifica",smart_plugs:"Smart Plug",printers:"Stampanti",filaments:"Filamenti",maintenance_types:"Tipi di manutenzione",archives:"Archivi",projects:"Progetti",pending_uploads:"Upload in sospeso",external_links:"Link esterni",api_keys:"Chiavi API"}},tags:{title:"Tag",addTag:"Aggiungi tag",editTag:"Modifica tag",deleteTag:"Elimina tag",tagName:"Nome tag",tagColor:"Colore tag",noTags:"Nessun tag",deleteConfirm:"Sei sicuro di voler eliminare questo tag?",manageTags:"Gestisci tag"},uploadModal:{title:"Carica file 3MF",dragDrop:"Trascina e rilascia file .3mf qui",or:"o",browseFiles:"Sfoglia file",extractionInfo:"Il modello stampante sarà estratto automaticamente dai metadati del file 3MF.",uploaded:"caricati",failed:"falliti",uploading:"Caricamento...",upload:"Carica",uploadFailed:"Caricamento fallito"},editArchive:{title:"Modifica archivio",name:"Nome",namePlaceholder:"Nome stampa",printer:"Stampante",noPrinter:"Nessuna stampante",project:"Progetto",noProject:"Nessun progetto",itemsPrinted:"Elementi stampati",itemsPrintedHelp:"Numero di elementi prodotti in questo job di stampa",notes:"Note",notesPlaceholder:"Aggiungi note su questa stampa...",externalLink:"Link esterno",externalLinkPlaceholder:"https://printables.com/model/...",externalLinkHelp:"Link a Printables, Thingiverse o altra fonte",tags:"Tag",tagsPlaceholder:"Aggiungi tag...",addMoreTags:"Aggiungi altri tag...",matchingTags:'Tag corrispondenti "{{query}}"',existingTags:"Tag esistenti",clickToAdd:"(clicca per aggiungere)",status:"Stato",failureReason:"Motivo fallimento",selectReason:"Seleziona motivo...",photos:"Foto del risultato stampato",photosHelp:"Clicca + per aggiungere foto del risultato stampato",printResult:"Risultato stampa",saving:"Salvataggio...",failureReasons:{adhesionFailure:"Fallimento adesione",spaghettiDetached:"Spaghetti / staccato",layerShift:"Spostamento layer",cloggedNozzle:"Ugello intasato",filamentRunout:"Filamento esaurito",warping:"Deformazione",stringing:"Filamento",underExtrusion:"Sotto-estrusione",powerFailure:"Mancanza corrente",userCancelled:"Annullato dall'utente",other:"Altro"},statuses:{completed:"Completato",failed:"Fallito",aborted:"Annullato",printing:"In stampa"}},kProfiles:{title:"Profili K",noPrintersConfigured:"Nessuna stampante configurata",addPrinterInSettings:"Aggiungi una stampante in Impostazioni per gestire i K-profiles",noActivePrinters:"Nessuna stampante attiva",enablePrinterConnection:"Abilita una connessione stampante per vedere i K-profiles",loadingProfiles:"Caricamento K-Profiles...",printerOffline:"Stampante offline",printerOfflineDesc:"La stampante selezionata non e connessa. Accendila per vedere i K-profiles.",noMatchingProfiles:"Nessun profilo corrispondente",noMatchingProfilesDesc:"Nessun profilo corrisponde ai criteri di ricerca",noKProfiles:"Nessun K-Profile",noKProfilesDesc:"Nessun profilo pressure advance per ugello da {{diameter}}mm",createFirstProfile:"Crea primo profilo",printer:"Stampante",nozzle:"Ugello",refresh:"Aggiorna",addProfile:"Aggiungi profilo",export:"Esporta",import:"Importa",select:"Seleziona",selectAll:"Seleziona tutto",delete:"Elimina",searchPlaceholder:"Cerca per nome o filamento...",allExtruders:"Tutti gli estrusori",leftOnly:"Solo sinistro",rightOnly:"Solo destro",allFlow:"Tutto flow",hfOnly:"Solo HF",sOnly:"Solo S",sortName:"Ordina: Nome",sortKValue:"Ordina: K-Value",sortFilament:"Ordina: Filamento",leftExtruder:"Estrusore sinistro",rightExtruder:"Estrusore destro",modal:{addTitle:"Aggiungi K-Profile",editTitle:"Modifica K-Profile",profileName:"Nome profilo",profileNamePlaceholder:"Il mio profilo PLA",kValue:"Valore K",kValuePlaceholder:"0.020",kValueHelp:"Intervallo tipico: 0.01 - 0.06 per PLA, 0.02 - 0.10 per PETG",filament:"Filamento",selectFilament:"Seleziona filamento...",noFilamentsHelp:"Nessun filamento trovato. Crea prima un K-profile in Bambu Studio.",flowType:"Tipo flow",highFlow:"Alto flusso",standard:"Standard",nozzleSize:"Dimensione ugello",extruder:"Estrusore",extruders:"Estrusori",left:"Sinistra",right:"Destra",notes:"Note (salvate localmente)",notesPlaceholder:"Aggiungi note su questo profilo...",notesHelp:"Le note sono salvate in Bambuddy, non sulla stampante",syncing:"Sincronizzazione con stampante...",savingExtruder:"Salvataggio su estrusore {{current}}/{{total}}...",pleaseWait:"Attendere"},deleteConfirm:{title:"Elimina profilo",cannotUndo:"Questo non può essere annullato",message:'Sei sicuro di voler eliminare "{{name}}" dalla stampante?'},bulkDelete:{title:"Elimina profili",cannotUndo:"Questo non può essere annullato",message:"Sei sicuro di voler eliminare {{count}} profili selezionati dalla stampante?"},toast:{profileSaved:"K-profile salvato",profilesSaved:"K-profile salvato su {{count}} estrusori",selectAtLeastOneExtruder:"Seleziona almeno un estrusore",profileDeleted:"K-profile eliminato",profilesDeleted:"Eliminati {{count}} profili",exportedProfiles:"Esportati {{count}} profili",importedProfiles:"Importati {{count}} di {{total}} profili",noProfilesToExport:"Nessun profilo da esportare",invalidFileFormat:"Formato file non valido",failedToParseImport:"Parsing file import fallito",failedToSaveBatch:"Salvataggio K-profiles fallito",noteSaved:"Nota salvata",failedToSaveNote:"Salvataggio nota fallito"},permission:{noRead:"Non hai il permesso di aggiornare i profili",noCreate:"Non hai il permesso di aggiungere profili",noUpdate:"Non hai il permesso di aggiornare K-profiles",noDelete:"Non hai il permesso di eliminare K-profiles",noExport:"Non hai il permesso di esportare profili",noImport:"Non hai il permesso di importare profili"}},virtualPrinter:{title:"Stampante virtuale",running:"In esecuzione",stopped:"Ferma",description:{default:"Abilita una stampante virtuale che appare in Bambu Studio e OrcaSlicer. I file inviati a questa stampante saranno archiviati senza stampare.",proxy:"Abilita un proxy che inoltra il traffico slicer a una stampante reale, permettendo la stampa remota su qualsiasi rete."},enable:{title:"Abilita stampante virtuale",visibleInSlicer:'Visibile come "Bambuddy" nella ricerca slicer',proxyingTo:"In proxy verso {{name}}",notActive:"Non attivo"},model:{title:"Modello stampante",description:"Seleziona il modello stampante da emulare.",restartWarning:"Cambiare il modello riavviera la stampante virtuale"},accessCode:{title:"Codice accesso",isSet:"Codice accesso impostato",notSet:"Nessun codice accesso impostato - richiesto per abilitare",placeholder:"Inserisci codice 8 caratteri",placeholderChange:"Inserisci nuovo codice per cambiare",hint:"Deve essere esattamente 8 caratteri. Usato dagli slicer per autenticarsi.",charCount:"({{count}}/8)"},targetPrinter:{title:"Stampante target",configured:"Target proxy configurato",notConfigured:"Nessuna stampante target selezionata - richiesta per modalita proxy",placeholder:"Seleziona una stampante...",hint:"Seleziona la stampante a cui fare proxy. La stampante deve essere in modalita LAN.",noPrinters:"Nessuna stampante configurata. Aggiungi una stampante per usare la modalita proxy."},remoteInterface:{title:"Sovrascrittura interfaccia di rete",configured:"Sovrascrittura interfaccia attiva",optional:"Opzionale - usare se l'IP rilevato automaticamente e sbagliato (es. piu NIC, Docker, VPN)",placeholder:"Rilevamento automatico (predefinito)...",hint:"Sovrascrive l'indirizzo IP pubblicizzato via SSDP e usato nel certificato TLS. Utile quando Bambuddy ha piu interfacce di rete."},mode:{title:"Modalita",archive:"Archivio",archiveDesc:"Archivia subito i file",review:"Revisione",reviewDesc:"Rivedi prima di archiviare",queue:"Coda",queueDesc:"Archivia e aggiungi alla coda",proxy:"Proxy",proxyDesc:"Inoltra a stampante reale"},autoDispatch:{title:"Avvio automatico",description:"Avvia automaticamente le stampe aggiunte alla coda. Se disattivato, le stampe attendono l'avvio manuale."},queueForceColorMatch:{title:"Forza corrispondenza colori",description:"Rifiuta di inviare a una stampante che non ha esattamente il tipo di filamento e il colore caricato. Disattivato per impostazione predefinita — senza questo, la coda usa solo la corrispondenza per modello e potrebbe scegliere una stampante con il colore sbagliato."},tailscaleDisabled:{title:"Integrazione Tailscale",description:"Abilita per contrassegnare questo VP come esposto tramite Tailscale. Mostra l'indirizzo Tailscale dell'host così sai quale IP incollare nello slicer. Il passo di importazione CA è invariato — questo toggle non ha effetto sui certificati."},setupRequired:{title:"Configurazione necessaria",description:"La stampante virtuale richiede configurazioni di sistema aggiuntive prima di funzionare. Include port forwarding, regole firewall e impostazioni specifiche della piattaforma.",readGuide:"Leggi la guida prima di abilitare"},howItWorks:{title:"Come funziona",step1:"Sulla stessa LAN, le stampanti virtuali appaiono automaticamente nel tuo slicer (Bambu Studio / OrcaSlicer). Da altre reti, aggiungile manualmente tramite indirizzo IP e codice di accesso.",step2:'In modalità Archivio, Revisione e Coda, usa il pulsante "Invia" nel tuo slicer per caricare file 3MF su Bambuddy. Lo slicer mostrerà "Stampa riuscita" — il file viene salvato, non stampato.',step3:"In modalità Proxy, la stampante virtuale inoltra tutto il traffico a una stampante reale — le stampe partono immediatamente come con una connessione diretta."},status:{title:"Dettagli stato",printerName:"Nome stampante",model:"Modello",serialNumber:"Numero seriale",mode:"Modalita",pendingFiles:"File in sospeso",targetPrinter:"Stampante target",ftpPort:"Porta FTP",mqttPort:"Porta MQTT",ftpConnections:"Connessioni FTP",mqttConnections:"Connessioni MQTT"},toast:{updated:"Impostazioni stampante virtuale aggiornate",failedToUpdate:"Aggiornamento impostazioni fallito",copyFailed:"Copia non riuscita — seleziona il testo manualmente",accessCodeRequired:"Imposta prima un codice accesso",targetPrinterRequired:"Seleziona prima una stampante target",bindIpRequired:"Impostare prima un indirizzo IP",accessCodeEmpty:"Il codice accesso non può essere vuoto",accessCodeLength:"Il codice accesso deve essere esattamente 8 caratteri",created:"Stampante virtuale creata",failedToCreate:"Impossibile creare la stampante virtuale",deleted:"Stampante virtuale eliminata",failedToDelete:"Impossibile eliminare la stampante virtuale"},list:{title:"Stampanti virtuali",add:"Aggiungi",addFirst:"Aggiungi stampante virtuale",empty:"Nessuna stampante virtuale configurata. Aggiungine una per iniziare."},bindIp:{title:"Interfaccia di rete",placeholder:"Seleziona interfaccia...",hint:"Interfaccia di rete a cui questa stampante virtuale si collega. Deve essere unica per stampante."},proxy:{accessCodeHint:"In modalita proxy, usa il codice di accesso della stampante di destinazione nello slicer. La connessione viene inoltrata in modo trasparente alla stampante reale."},addDialog:{title:"Aggiungi stampante virtuale",name:"Nome",hint:"Potrai configurare il codice di accesso, la stampante di destinazione e altre impostazioni dopo la creazione.",create:"Crea"},deleteConfirm:{title:"Elimina stampante virtuale",message:'Sei sicuro di voler eliminare "{{name}}"? Tutti i servizi di questa stampante verranno interrotti.'},archiveNameSource:{title:"Origine nome archivio",description:'Scegli come vengono nominati i nuovi archivi quando i file arrivano tramite la stampante virtuale. "Metadati" utilizza il titolo incorporato nello slicer dal 3MF (default). "Nome file" utilizza il nome che Bambu Studio ha inviato via FTP — utile se hai rinominato il job nella finestra "invia a stampante".',metadata:"Metadati",filename:"Nome file"},caCert:{title:"Certificato dello slicer",description:"Le stampanti virtuali usano un certificato TLS firmato dalla CA di Bambuddy. Importa questo certificato CA nell'archivio attendibile del tuo slicer una sola volta affinché accetti la connessione — senza doverlo copiare dalla riga di comando.",copy:"Copia",copied:"Copiato",download:"Scarica",fingerprint:"SHA-256"}},modelViewer:{openInSlicer:"Apri nello slicer",tabs:{model:"Modello 3D",gcode:"Anteprima G-code"},notAvailable:"non disponibile",notSliced:"non sezionato",plates:"Piatti",allPlates:"Tutti i piatti",plateNumber:"Piatto {{number}}",plateCount:"{{count}} piatto",plateCount_other:"{{count}} piatti",objectCount:"{{count}} oggetto",objectCount_other:"{{count}} oggetti",filamentCount:"{{count}} filamento",filamentCount_other:"{{count}} filamenti",eta:"ETA {{minutes}} min",noPreview:"Nessuna anteprima disponibile per questo file",pagination:{pageOf:"Pagina {{current}} di {{total}}",prev:"Prec",next:"Succ"},errors:{failedToLoad:"Caricamento file fallito",noMeshes:"Nessuna mesh trovata nel file 3MF",unsupportedFormat:"Formato file non supportato"}},maintenanceDescriptions:{lubricateCarbonRods:"Applica lubrificante alle aste in carbonio per un movimento fluido",lubricateRails:"Applica lubrificante alle guide lineari per un movimento fluido",cleanNozzle:"Pulisci hotend e ugello per prevenire intasamenti",checkBelts:"Verifica tensione cinghie per stampe accurate",cleanBuildPlate:"Pulisci il piatto per migliorare l'adesione",checkExtruder:"Ispeziona ingranaggi estrusore per usura",checkCooling:"Assicurati che le ventole di raffreddamento funzionino",generalInspection:"Ispezione generale stampante",cleanCarbonRods:"Pulisci le aste in carbonio per ridurre attrito",lubricateSteelRods:"Applica lubrificante alle aste in acciaio per un movimento fluido",cleanSteelRods:"Pulisci le aste in acciaio per ridurre attrito",cleanLinearRails:"Pulisci le guide lineari per rimuovere polvere e detriti",checkPtfeTube:"Ispeziona il tubo PTFE per usura o danni",replaceHepaFilter:"Sostituisci filtro HEPA per qualità aria",replaceCarbonFilter:"Sostituisci filtro a carbone attivo",lubricateLeftNozzleRail:"Lubrifica guida ugello sinistro (serie H2)"},smartPlugs:{offline:"Offline",admin:"Amministrazione",openPlugAdminPage:"Apri pagina amministrazione presa",deleteSmartPlug:"Elimina presa smart",turnOnSmartPlug:"Accendi presa smart",turnOffSmartPlug:"Spegni presa smart",turnOn:"Accendi",turnOff:"Spegni",addSmartPlug:{scanningNetwork:"Scansione rete...",chooseEntity:"Scegli un'entità...",connectionFailed:"Connessione fallita",searchEntities:"Cerca entità...",searchPowerSensors:"Cerca sensori di potenza...",searchEnergySensors:"Cerca sensori di energia...",placeholders:{plugName:"Presa soggiorno",mqttStateOnValue:"ON, true, 1",mqttSameAsPower:"Stesso del topic potenza, o diverso"}},linkedTo:"Collegato a:",monitorOnly:"Solo monitoraggio",alerts:"Avvisi",scheduleOn:"Alle {{time}}",scheduleOff:"Spento {{time}}",on:"On",off:"Spento",power:"Potenza",kwhToday:"kWh Oggi",settings:"Impostazioni",automationSettings:"Impostazioni automazione",showInSwitchbar:"Mostra nella barra interruttori",quickAccessSidebar:"Accesso rapido dalla barra laterale",enabled:"Abilitato",enableAutomation:"Abilita automazione per questa presa",autoOn:"Auto On",autoOnDescription:"Accendi quando inizia la stampa",autoOff:"Auto Off",autoOffDescription:"Spegni quando la stampa è completata (una tantum)",autoOffPersistent:"Mantieni attivo",autoOffPersistentDescription:"Resta attivo tra le stampe invece di una tantum",autoOffAfterDrying:"Spegni dopo asciugatura",autoOffAfterDryingDescription:"Spegni al termine dell'asciugatura AMS",delayAfterDryingMinutes:"Ritardo dopo asciugatura (minuti)",turnOffDelayMode:"Modalità ritardo spegnimento",time:"Tempo",temp:"Temp.",delayMinutes:"Ritardo (minuti)",tempThreshold:"Soglia temperatura (°C)",tempThresholdDescription:"Si spegne quando l'ugello si raffredda sotto questa temperatura",edit:"Modifica",deleteConfirm:'Sei sicuro di voler eliminare "{{name}}"? Questa azione non può essere annullata.',turnOnConfirm:'Sei sicuro di voler accendere "{{name}}"?',turnOffConfirm:`Sei sicuro di voler spegnere "{{name}}"? Questo interromperà l'alimentazione del dispositivo collegato.`,failedToTurn:'Impossibile {{action}} "{{name}}"',unknown:"Sconosciuto",addTitle:"Aggiungi presa smart",editTitle:"Modifica presa smart",stopScanning:"Interrompi scansione",discoverTasmota:"Scopri dispositivi Tasmota",foundDevices:"{{count}} dispositivo/i trovato/i - clicca per selezionare:",noDevicesFound:"Nessun dispositivo Tasmota trovato nella rete",haNotConfigured:"Home Assistant non è configurato. Configuralo in",haSettingsPath:"Impostazioni → Rete → Home Assistant",selectEntity:"Seleziona entità *",ipAddress:"Indirizzo IP *",nameLabel:"Nome *",username:"Nome utente",password:"Password",authHint:"Lascia vuoto se il tuo dispositivo Tasmota non richiede autenticazione",linkToPrinter:"Collega alla stampante",noPrinter:"Nessuna stampante (solo controllo manuale)",linkingDescription:"Il collegamento abilita accensione/spegnimento automatico all'inizio/fine stampa",powerAlerts:"Avvisi potenza",alertAbove:"Avviso se sopra (W)",alertBelow:"Avviso se sotto (W)",alertDescription:"Ricevi notifiche quando il consumo supera queste soglie. Lascia vuoto per disabilitare quella direzione.",dailySchedule:"Programma giornaliero",turnOnAt:"Accendi alle",turnOffAt:"Spegni alle",scheduleDescription:"Accendi/spegni automaticamente la presa a questi orari ogni giorno. Lascia vuoto per saltare quell'azione.",showOnPrinterCard:"Mostra sulla scheda stampante",displayOnPrinterCard:"Mostra pulsante sulla scheda stampante",connectedResult:"Connesso!",deviceLabel:"Dispositivo: {{name}} - ",stateLabel:"Stato: {{state}}",test:"Test",delete:"Elimina",save:"Salva",add:"Aggiungi",cancel:"Annulla",failedToStartScan:"Impossibile avviare la scansione",nameRequired:"Il nome è obbligatorio",entityRequired:"L'entità è obbligatoria per le prese Home Assistant",mqttTopicRequired:"Almeno un topic MQTT deve essere configurato per potenza, energia o monitoraggio stato",loadingEntities:"Caricamento entità...",loading:"Caricamento...",failedToLoadEntities:"Impossibile caricare le entità: {{error}}",noEntitiesMatching:'Nessuna entità trovata corrispondente a "{{search}}"',noEntitiesAvailable:"Nessuna entità disponibile",searchingEntities:"Ricerca in tutte le entità ({{count}} trovate)",showingEntities:"Mostrando switch, light, input_boolean ({{count}} disponibili)",energyMonitoringOptional:"Monitoraggio energia (Opzionale)",energyMonitoringHint:"Cerca e seleziona i sensori che forniscono dati di potenza/energia.",powerSensorW:"Sensore potenza (W)",energyTodayKwh:"Energia oggi (kWh)",totalEnergyKwh:"Energia totale (kWh)",noMatchingSensors:"Nessun sensore corrispondente",none:"Nessuno",mqttNotConfigured:"Broker MQTT non configurato. Imposta l'indirizzo del broker in",mqttSettingsPath:"Impostazioni → Rete → Pubblicazione MQTT",mqttNotConfiguredSuffix:"(non è necessario abilitare la pubblicazione, basta inserire i dettagli del broker).",mqttMonitorOnlyDescription:"Le prese MQTT ricevono dati di potenza/energia tramite sottoscrizione MQTT. Il controllo on/off non è disponibile - usa il tuo broker MQTT o sistema domotico.",powerMonitoring:"Monitoraggio potenza",energyMonitoring:"Monitoraggio energia",stateMonitoring:"Monitoraggio stato",optional:"opzionale",topic:"Argomento",jsonPath:"Percorso JSON",multiplier:"Moltiplicatore",onValue:"Valore ON",mqttPowerHint:`Il percorso JSON estrae il valore dal payload JSON (es. "power_l1"). Lascia vuoto se il topic pubblica valori numerici grezzi.
 Usa moltiplicatore 0.001 per mW→W, 1000 per kW→W.`,mqttEnergyHint:`Il percorso JSON estrae il valore dal payload JSON. Lascia vuoto per valori grezzi.
 Usa moltiplicatore 0.001 per Wh→kWh, 1000 per MWh→kWh.`,mqttStateHint:`Il percorso JSON estrae il valore dal payload JSON. Lascia vuoto per valori grezzi.
-Valore ON: la stringa esatta che significa "ON". Lascia vuoto per rilevamento auto (ON, true, 1).`,restControl:"Controllo",restOnUrl:"URL accensione",restOffUrl:"URL spegnimento",restOnBody:"Corpo richiesta ON",restOffBody:"Corpo richiesta OFF",restMethod:"Metodo HTTP",restHeaders:"Custom Headers (JSON)",restStatusUrl:"URL stato",restStatusPath:"Percorso JSON stato",restStatusOnValue:"Valore ON",restPowerUrl:"URL potenza",restPowerPath:"Percorso JSON potenza",restPowerMultiplier:"Moltiplicatore potenza",restEnergyUrl:"URL energia",restEnergyPath:"Percorso JSON energia",restEnergyMultiplier:"Moltiplicatore energia",restUrlRequired:"È richiesto almeno un URL (ON o OFF) per le prese REST",restHeadersHint:'es. {"Authorization": "Bearer your-token"}',restBodyHint:'es. ON, {"state": "on"}',restStatusHint:"URL per recuperare lo stato attuale",restPathHint:"es. state o data.power.status",restPowerUrlHint:"URL separato per i dati di potenza (usa l'URL di stato se vuoto)",restEnergyUrlHint:"URL separato per i dati di energia (usa l'URL di stato se vuoto)",restEnergyHint:"Ogni valore può usare il proprio URL o ricadere sull'URL di stato. Usa i moltiplicatori per la conversione delle unità (es. 0.001 per convertire Wh in kWh).",testConnection:"Testa connessione",connectionSuccess:"Connessione riuscita",noSwitchesInSwitchbar:"Nessun interruttore nella barra",enableSwitchbarHint:'Abilita "Mostra nella barra interruttori" in Impostazioni > Smart Plugs'},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"E-mail",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"Notifiche email tramite SMTP",telegram:"Notifiche tramite bot Telegram",discord:"Invia a un canale Discord tramite webhook",ntfy:"Notifiche push gratuite e self-hostabili",pushover:"Notifiche push semplici e affidabili",callmebot:"Notifiche WhatsApp gratuite tramite CallMeBot",webhook:"POST HTTP generico verso qualsiasi URL",homeassistant:"Notifiche persistenti nella dashboard di Home Assistant"},lastSuccess:"Ultimo: {{date}}",error:"Errore",printer:"Stampante:",allPrinters:"Tutte le stampanti",sendTestNotification:"Invia notifica di prova",eventSettings:"Impostazioni eventi",enabled:"Abilitato",sendFromProvider:"Invia notifiche da questo provider",printEvents:"Eventi di stampa",printerStatus:"Stato stampante",amsAlarms:"Allarmi AMS",amsHtAlarms:"Allarmi AMS-HT",printQueue:"Coda di stampa",start:"Avvio",plateCheck:"Controllo piatto",complete:"Completato",failed:"Fallito",stopped:"Interrotto",progress:"Avanzamento",offline:"Offline",lowFilament:"Filamento scarso",maintenance:"Manutenzione",amsHumidity:"Umidità AMS",amsTemp:"Temp AMS",amsHtHumidity:"Umidità AMS-HT",amsHtTemp:"Temp AMS-HT",bedCooled:"Piatto raffreddato",firstLayer:"Primo strato",quiet:"Silenzioso",digest:"Riepilogo {{time}}",printStarted:"Stampa avviata",plateNotEmpty:"Piatto non vuoto",plateNotEmptyDescription:"Oggetti rilevati prima della stampa",printCompleted:"Stampa completata",bedCooledLabel:"Piatto raffreddato",bedCooledDescription:"Piatto raffreddato sotto la soglia dopo la stampa",firstLayerCompleteLabel:"Primo strato completato",firstLayerCompleteDescription:"Notifica con foto al termine del primo strato",missingSpoolAssignmentLabel:"Assegnazione bobina mancante",missingSpoolAssignmentDescription:"Notifica quando una stampa parte e i vassoi richiesti non hanno una bobina assegnata",printFailed:"Stampa fallita",printStopped:"Stampa interrotta",progressMilestones:"Traguardi di avanzamento",progressMilestonesDescription:"Notifica al 25%, 50%, 75%",printerOffline:"Stampante offline",printerError:"Errore stampante",lowFilamentLabel:"Filamento scarso",maintenanceDue:"Manutenzione necessaria",maintenanceDueDescription:"Notifica quando è necessaria la manutenzione",amsHumidityHigh:"Umidità AMS elevata",amsHumidityHighDescription:"L'umidità dell'AMS standard supera la soglia",amsTemperatureHigh:"Temperatura AMS elevata",amsTemperatureHighDescription:"La temperatura dell'AMS standard supera la soglia",amsHtHumidityHigh:"Umidità AMS-HT elevata",amsHtHumidityHighDescription:"L'umidità dell'AMS-HT supera la soglia",amsHtTemperatureHigh:"Temperatura AMS-HT elevata",amsHtTemperatureHighDescription:"La temperatura dell'AMS-HT supera la soglia",inventoryAlerts:"Avvisi di inventario",stockReorderAlert:"Avviso di riordino",stockReorderAlertDescription:"Il SKU ha raggiunto il punto di riordino",stockBreakAlert:"Avviso di esaurimento scorte",stockBreakAlertDescription:"Le scorte si esauriranno prima dell'arrivo del rifornimento",jobAdded:"Lavoro aggiunto",jobAddedDescription:"Lavoro aggiunto alla coda",jobAssigned:"Lavoro assegnato",jobAssignedDescription:"Lavoro basato su modello assegnato alla stampante",jobStarted:"Lavoro avviato",jobStartedDescription:"Lavoro in coda avviato per la stampa",jobWaiting:"Lavoro in attesa",jobWaitingDescription:"Lavoro in attesa di filamento o stampante",jobSkipped:"Lavoro saltato",jobSkippedDescription:"Lavoro saltato (precedente fallito)",jobFailed:"Lavoro fallito",jobFailedDescription:"Avvio del lavoro fallito",queueComplete:"Coda completata",queueCompleteDescription:"Tutti i lavori in coda completati",quietHours:"Ore silenziose",noNotificationsDuring:"Nessuna notifica durante queste ore",editProviderToChangeQuietHours:"Modifica il provider per cambiare le ore silenziose",dailyDigest:"Riepilogo giornaliero",batchNotifications:"Raggruppa le notifiche in un unico riepilogo giornaliero",sendAt:"Invia alle {{time}}",editProviderToChangeDigestTime:"Modifica il provider per cambiare l'orario del riepilogo",edit:"Modifica",deleteProvider:"Elimina provider di notifica",deleteConfirm:'Sei sicuro di voler eliminare "{{name}}"? Questa azione non può essere annullata.',delete:"Elimina",addTitle:"Aggiungi provider di notifica",editTitle:"Modifica provider di notifica",nameLabel:"Nome *",namePlaceholder:"Le mie notifiche",providerTypeLabel:"Tipo di provider *",configuration:"Configurazione",testConfiguration:"Testa configurazione",printerFilter:"Filtro stampante",onlyFromPrinter:"Invia notifiche solo per eventi da questa stampante",quietHoursDnd:"Ore silenziose (Non disturbare)",quietStart:"Inizio",quietEnd:"Fine",dailyDigestLabel:"Riepilogo giornaliero",sendDigestAt:"Invia riepilogo alle",digestCollected:"Gli eventi verranno raccolti e inviati come riepilogo unico a quest'ora",notificationEvents:"Eventi di notifica",progressPercent:"(25%, 50%, 75%)",bedCooledAfterPrint:"(dopo il completamento della stampa)",eventPriority:{sectionTitle:"Priorità ntfy",helpNtfy:"Scegli una priorità per ogni evento abilitato. ntfy le usa per intensificare gli avvisi (suono, visibilità, comportamento push). I livelli non impostati qui usano l'impostazione predefinita del server ntfy.",min:"Min.",low:"Bassa",default:"Predefinita",high:"Alta",urgent:"Urgente"},cancel:"Annulla",save:"Salva",add:"Aggiungi",nameRequired:"Il nome è obbligatorio",fieldRequired:"{{field}} è obbligatorio",phoneNumber:"Numero di telefono",apiKey:"Chiave API",serverUrl:"URL del server",topic:"Argomento",authToken:"Token di autenticazione",userKey:"Chiave utente",appToken:"Token applicazione",priority:"Priorità",botToken:"Token del bot",chatId:"ID chat",smtpServer:"Server SMTP",smtpPort:"Porta SMTP",security:"Sicurezza",authentication:"Autenticazione",username:"Nome utente",password:"Password",fromEmail:"Email mittente",toEmail:"Email destinatario",webhookUrl:"URL webhook",payloadFormat:"Formato payload",authorization:"Autorizzazione",titleFieldName:"Nome campo titolo",messageFieldName:"Nome campo messaggio",editTemplate:"Modifica modello: {{name}}",titleLabel:"Titolo",bodyLabel:"Corpo",titlePlaceholder:"Titolo della notifica...",bodyPlaceholder:"Corpo della notifica...",availableVariables:"Variabili disponibili",clickToInsert:"Clicca per inserire alla posizione del cursore nel corpo",livePreview:"Anteprima live",hide:"Nascondi",show:"Mostra",loadingPreview:"Caricamento anteprima...",enterTemplateContent:"Inserisci il contenuto del modello per vedere l'anteprima",titlePreview:"Titolo:",bodyPreview:"Corpo:",resetToDefault:"Ripristina predefinito",titleRequired:"Il titolo è obbligatorio",bodyRequired:"Il corpo è obbligatorio",notificationLog:"Registro notifiche",showFailedOnly:"Solo fallite",last24Hours:"Ultime 24 ore",last7Days:"Ultimi 7 giorni",last30Days:"Ultimi 30 giorni",last90Days:"Ultimi 90 giorni",justNow:"Proprio ora",noFailedNotifications:"Nessuna notifica fallita",noNotificationsLogged:"Nessuna notifica registrata",unknownProvider:"Provider sconosciuto",logTitle:"Titolo",logMessage:"Messaggio",logError:"Errore",logProvider:"Provider: {{type}}",logTime:"Ora: {{time}}",refresh:"Aggiorna",clearOld:"Cancella vecchie",statsSummary:"Ultimi {{days}} giorni:",statsNotifications:"notifiche",statsSent:"{{count}} inviate",statsFailed:"{{count}} fallite",eventTypes:{print_start:"Stampa avviata",print_complete:"Stampa completata",print_failed:"Stampa fallita",print_stopped:"Stampa interrotta",print_progress:"Avanzamento",printer_offline:"Stampante offline",printer_error:"Errore stampante",filament_low:"Filamento scarso",maintenance_due:"Manutenzione necessaria",test:"Prova"},userEmail:{title:"Notifiche",emailNotifications:"Notifiche via e-mail",emailNotificationsDesc:"Ricevi notifiche via e-mail per i tuoi lavori di stampa. Le e-mail vengono inviate tramite le impostazioni SMTP configurate nell'autenticazione avanzata.",sendingTo:"Le notifiche verranno inviate a",noEmailWarning:"Il tuo account non ha un indirizzo e-mail. Contatta un amministratore per aggiungerne uno.",printJobNotifications:"Notifiche lavori di stampa",printJobNotificationsDesc:"Scegli quali eventi attivano le notifiche e-mail per i lavori di stampa che invii.",printJobStarts:"Inizio lavoro di stampa",printJobStartsDesc:"Ricevi una notifica quando il tuo lavoro di stampa inizia.",printJobFinishes:"Fine lavoro di stampa",printJobFinishesDesc:"Ricevi una notifica quando il tuo lavoro di stampa si completa correttamente.",printErrors:"Errori di stampa",printErrorsDesc:"Ricevi una notifica quando il tuo lavoro di stampa fallisce o incontra un errore.",printJobStops:"Lavoro di stampa interrotto",printJobStopsDesc:"Ricevi una notifica quando il tuo lavoro di stampa viene annullato o interrotto.",saveSuccess:"Preferenze di notifica salvate.",saveError:"Impossibile salvare le preferenze di notifica."}},richTextEditor:{bold:"Grassetto",italic:"Corsivo",underline:"Sottolineato",bulletList:"Elenco puntato",numberedList:"Elenco numerato",alignLeft:"Allinea a sinistra",alignCenter:"Allinea al centro",alignRight:"Allinea a destra",addLink:"Aggiungi link",removeLink:"Rimuovi link"},externalLinks:{noLinksConfigured:"Nessun link esterno configurato",deleteLink:"Elimina link",removeCustomIcon:"Rimuovi icona personalizzata",openInNewTab:"Apri in nuova scheda",placeholders:{linkName:"Il mio link"}},keyboardShortcuts:{title:"Scorciatoie da tastiera",navigation:"Navigazione",archivesSection:"Archivi",kProfilesSection:"Profili K",generalSection:"Generale",shortcuts:{goToPrinters:"Vai a Stampanti",goToArchives:"Vai ad Archivi",goToQueue:"Vai a Coda",goToStats:"Vai a Statistiche",goToProfiles:"Vai a Profili cloud",goToSettings:"Vai a Impostazioni",focusSearch:"Vai alla ricerca",openUploadModal:"Apri finestra di caricamento",clearSelection:"Cancella selezione / deseleziona input",contextMenu:"Menu contestuale sulle schede",refreshProfiles:"Aggiorna profili",newProfile:"Nuovo profilo",exitSelectionMode:"Esci dalla modalità selezione",showHelp:"Mostra questa guida"},footer:"Premi Esc o clicca fuori per chiudere"},notificationLog:{title:"Registro notifiche",events:{printStarted:"Stampa avviata",printComplete:"Stampa completata",printFailed:"Stampa fallita",printStopped:"Stampa interrotta",progress:"Avanzamento",printerOffline:"Stampante offline",printerError:"Errore stampante",lowFilament:"Filamento in esaurimento",maintenanceDue:"Manutenzione in scadenza",test:"Test"},timeAgo:{justNow:"Adesso",minutesAgo:"{{minutes}} min fa",hoursAgo:"{{hours}} ore fa"}},restoreBackup:{title:"Ripristina backup",restoring:"Ripristino...",restoreComplete:"Ripristino completato",restoreFailed:"Ripristino fallito",importSettings:"Importa impostazioni da un file di backup",pleaseWait:"Attendere il ripristino dei dati",clickToSelect:"Clicca per selezionare il file di backup (.json o .zip)",howDuplicateHandling:"Come funziona la gestione dei duplicati:",categories:{printers:"Stampanti",smartPlugs:"Prese smart",notificationProviders:"Provider di notifica",filaments:"Filamenti",archives:"Archivi",pendingUploads:"Caricamenti in sospeso",settingsTemplates:"Impostazioni e modelli"},matchingInfo:{printers:"abbinati per numero di serie",smartPlugs:"abbinati per indirizzo IP",notificationProviders:"abbinati per nome",filaments:"abbinati per nome + tipo + marca",archives:"abbinati per hash del contenuto",pendingUploads:"abbinati per nome file",settingsTemplates:"sempre sovrascritti"},replaceExisting:"Sostituisci dati esistenti",keepExisting:"Mantieni dati esistenti",replaceDescription:"Sovrascrivi gli elementi già esistenti con i dati del backup",keepDescription:"Ripristina solo gli elementi che non esistono già",caution:"Attenzione:",cautionText:"La sovrascrittura sostituirà le configurazioni attuali con i dati del backup. I codici di accesso delle stampanti non vengono mai sovrascritti per sicurezza.",itemsRestored:"Elementi ripristinati",itemsSkipped:"Elementi saltati",restored:"Ripristinati",skipped:"Saltati (già esistenti)",filesLabel:"File (3MF, miniature, ecc.)",newApiKeysGenerated:"Nuove chiavi API generate",newApiKeysWarning:"Queste chiavi vengono mostrate una sola volta. Copiale adesso!",processingBackup:"Elaborazione file di backup...",noDataFound:"Nessun dato trovato da ripristinare nel file di backup.",failedToRestore:"Impossibile ripristinare il backup. Verificare il formato del file."},backupExport:{title:"Esporta backup",selectData:"Seleziona i dati da includere",selectAll:"Seleziona tutto",selectNone:"Deseleziona tutto",categoryDescriptions:{settings:"Lingua, tema, preferenze di aggiornamento",notifications:"ntfy, Pushover, Discord, ecc.",templates:"Modelli di messaggi personalizzati",smartPlugs:"Configurazioni prese Tasmota",externalLinks:"Link della barra laterale a servizi esterni",printers:"Info stampanti (codici di accesso esclusi)",plateDetection:"Immagini di riferimento piatto vuoto",filaments:"Tipi di filamento e costi",maintenance:"Programmi di manutenzione personalizzati",archives:"Tutti i dati di stampa + file (3MF, miniature, foto)",projects:"Progetti, elementi BOM e allegati",pendingUploads:"Caricamenti della stampante virtuale in attesa di revisione",apiKeys:"Chiavi API webhook (nuove chiavi generate all'importazione)"},requiresPrinters:"Richiede la selezione di Stampanti",zipFileWarning:"Verrà creato un file ZIP.",zipFileDescription:"Include tutti i file 3MF, miniature, timelapse e foto. Potrebbe richiedere tempo e produrre un file di grandi dimensioni.",includeAccessCodes:"Includi codici di accesso",includeAccessCodesDescription:"Per il trasferimento su un'altra macchina",includeAccessCodesWarning:"I codici di accesso saranno inclusi in testo semplice. Mantieni sicuro questo file di backup!",categoriesSelected:"{{selectedCount}} categorie selezionate"},pendingUploads:{placeholders:{notes:"Aggiungi note su questa stampa..."},discardUpload:"Scarta caricamento",archiveAllUploads:"Archivia tutti i caricamenti",discardAllUploads:"Scarta tutti i caricamenti",archive:"Archivia",timeAgo:{justNow:"Adesso",minutesAgo:"{{minutes}} min fa",hoursAgo:"{{hours}} ore fa",daysAgo:"{{days}} giorni fa"}},apiBrowser:{placeholders:{requestBody:"Corpo della richiesta JSON...",searchEndpoints:"Cerca endpoint..."}},configureAmsSlot:{title:"Configura Slot AMS",slotConfigured:"Slot configurato!",configuringSlot:"Configurazione slot:",slotLabel:"{{ams}} – Slot {{slot}}",searchPresets:"Cerca preset...",colorPlaceholder:"Nome colore o hex (es. marrone, FF8800)",clearCustomColor:"Cancella colore personalizzato",noCloudPresets:"Nessun preset cloud. Accedi a Bambu Cloud per sincronizzare.",noPresetsAvailable:"Nessun preset disponibile. Accedi a Bambu Cloud o importa profili locali.",noMatchingPresets:"Nessun preset corrispondente trovato.",custom:"Personalizzato",builtin:"Integrato",settingsSentToPrinter:"Impostazioni inviate alla stampante",filamentProfile:"Profilo filamento",kProfileLabel:"Profilo K (Pressure Advance)",filteringFor:"Filtrando per: {{material}}",noKProfile:"Nessun profilo K (usa predefinito 0.020)",noMatchingKProfiles:"Nessun profilo K corrispondente. Verrà usato K=0.020 predefinito.",selectFilamentFirst:"Seleziona prima un profilo filamento",kFromCalibration:"K={{value}} dalla calibrazione stampante",customColorLabel:"Colore personalizzato (opzionale)",presetColors:"Colori {{name}}:",showLessColors:"Mostra meno colori",showMoreColors:"Mostra più colori",clear:"Cancella",hexLabel:"Hex – #{{hex}}",resetting:"Ripristino...",resetSlot:"Ripristina slot",cancel:"Annulla",configuring:"Configurazione...",configureSlot:"Configura slot"},githubBackup:{title:"Backup Git",history:"Cronologia",downloadBackup:"Scarica backup",restoreBackup:"Ripristina backup",noBackupsYet:"Nessun backup ancora"},emailSettings:{placeholders:{fromName:"Bambuddy"}},tagManagement:{searchTags:"Cerca tag...",renameTag:"Rinomina tag",deleteTag:"Elimina tag"},notificationTemplates:{placeholders:{title:"Titolo notifica...",body:"Corpo notifica..."}},batchTag:{placeholders:{newTag:"Inserisci nuovo tag..."}},photoGallery:{deletePhoto:"Elimina foto"},filamentHoverCard:{copySpoolUuid:"Copia UUID bobina"},kProfilesView:{hasNote:"Ha una nota",copyProfile:"Copia profilo"},layout:{openMenu:"Apri menu",noPermissionSystemInfo:"Non hai il permesso di visualizzare le informazioni di sistema"},dashboard:{dragToReorder:"Trascina per riordinare",hideWidget:"Nascondi widget"},notificationProviderCard:{deleteNotificationProvider:"Elimina provider di notifica"},fileManagerModal:{closeFileManager:"Chiudi gestore file",sortFiles:"Ordina file",goToParentFolder:"Vai alla cartella superiore",threeView:"Vista 3D"},embeddedCameraViewer:{refreshStream:"Aggiorna stream",close:"Chiudi",zoomOut:"Rimpicciolisci",resetZoom:"Reimposta zoom",zoomIn:"Ingrandisci",dragToResize:"Trascina per ridimensionare"},timelapseViewer:{skipBack5s:"Indietro 5s",skipForward5s:"Avanti 5s"},notificationProviders:{descriptions:{email:"Notifiche email via SMTP",telegram:"Notifiche tramite bot Telegram",discord:"Invia a canale Discord tramite webhook",ntfy:"Notifiche push gratuite e self-hostabili",pushover:"Notifiche push semplici e affidabili",callmebot:"Notifiche WhatsApp gratuite tramite CallMeBot",webhook:"POST HTTP generico a qualsiasi URL"}},logViewer:{searchPlaceholder:"Cerca messaggio o nome logger...",noLogEntries:"Nessuna voce di log trovata"},switchbarPopover:{noSwitchesInSwitchbar:"Nessun interruttore nella barra"},projectPageModal:{placeholders:{title:"Titolo",designer:"Designer",license:"Licenza",description:"Inserisci descrizione...",profileTitle:"Titolo profilo",profileDescription:"Descrizione profilo..."}},spoolmanSettings:{},time:{unknown:"-",waiting:"In attesa",justNow:"Proprio ora",now:"Ora",minsAgo:"{{count}}m fa",inMins:"tra {{count}}m",hoursAgo:"{{count}}h fa",inHours:"tra {{count}}h",daysAgo:"{{count}}g fa",inDays:"tra {{count}}g"},spoolbuddy:{nav:{dashboard:"Dashboard",ams:"AMS",inventory:"Inventario",writeTag:"Scrivi",settings:"Impostazioni"},status:{nfcReady:"NFC pronto",nfcOff:"NFC spento",offline:"Offline",online:"Online",noPrinters:"Nessuna stampante",deviceOffline:"Dispositivo offline",waitingConnection:"In attesa della connessione...",systemReady:"Sistema pronto",status:"Stato"},dashboard:{readyToScan:"Pronto per la scansione",idleMessage:"Posiziona una bobina sulla bilancia per identificarla",nfcHint:"Il tag NFC verrà letto automaticamente",device:"Dispositivo",syncWeight:"Sincronizza peso",weightSynced:"Sincronizzato!",unknownTag:"Tag sconosciuto",newTag:"Nuovo tag rilevato",onScale:"sulla bilancia",linkSpool:"Collega a bobina",linkTagTitle:"Collega tag a bobina",linkTag:"Collega tag",selectSpool:"Seleziona una bobina da collegare a questo tag:",noUntagged:"Nessuna bobina senza tag trovata",tagDetected:"Tag rilevato",noTag:"Nessun tag",tagId:"Etichetta",grossWeight:"Peso lordo",spoolSize:"Dimensione bobina",close:"Chiudi",currentSpool:"Bobina attuale",plateReady:"Piatto pronto: {{name}}",plateReadyLabel:"Piatti da liberare",plateClearAction:"Libera",plateClearedToast:"Piatto contrassegnato come liberato",plateClearFailed:"Impossibile contrassegnare il piatto come liberato"},modal:{spoolDetected:"Bobina rilevata",assignToAms:"Assegna all'AMS",syncWeight:"Sincronizza peso",weightSynced:"Sincronizzato!",syncing:"Sincronizzazione...",newTagDetected:"Nuovo tag rilevato",addToInventory:"Aggiungi all'inventario",assignToAmsTitle:"Assegna all'AMS",selectSlot:"Seleziona uno slot",assign:"Assegna",assigning:"Assegnazione...",assignSuccess:"Assegnato!",assignPendingInsert:"Assegnato. Lo slot verrà configurato all'inserimento della bobina.",assignError:"Impossibile assegnare la bobina. Riprovare.",noPrinterSelected:"Seleziona una stampante...",noAmsDetected:"Nessun AMS rilevato su questa stampante",slot:"Slot"},weight:{noReading:"Nessuna lettura",stable:"Stabile",measuring:"Misurazione...",tare:"Tara",calibrate:"Calibra"},spool:{remaining:"Rimanente",material:"Materiale",brand:"Marca",color:"Colore",coreWeight:"Nucleo",labelWeight:"Etichetta",scaleWeight:"Bilancia",netWeight:"Netto",lastUsed:"Ultimo utilizzo"},ams:{noData:"Nessun AMS rilevato",connectAms:"Collega un AMS per vedere gli slot",noPrinter:"Nessuna stampante selezionata",selectPrinter:"Seleziona una stampante dalla barra superiore",printerDisconnected:"Stampante disconnessa",humidity:"Umidità",level:"Livello",active:"Attivo",slot:"Slot",empty:"Vuoto"},inventory:{search:"Cerca bobine...",empty:"Nessuna bobina nell'inventario",noResults:"Nessuna bobina corrispondente",spools:"bobine",addSpool:"Aggiungi bobina"},settings:{tabDevice:"Dispositivo",tabDisplay:"Display",tabScale:"Bilancia",tabUpdates:"Aggiornamenti",nfcReader:"Lettore NFC",type:"Tipo",connection:"Connessione",notConnected:"N/D",deviceInfo:"Info dispositivo",hostname:"Host",uptime:"Tempo di attività",brightness:"Luminosità",saved:"Salvato",noBacklight:"Nessuna retroilluminazione DSI rilevata. Il controllo luminosità richiede un display DSI.",screenBlank:"Timeout spegnimento schermo",screenBlankDesc:"Lo schermo si spegne dopo inattività. Tocca per riattivare.",displayNote:"La luminosità viene applicata come filtro software.",scaleCalibration:"Calibrazione bilancia",currentWeight:"Peso attuale",tareOffset:"Tara",calFactor:"Fattore",knownWeight:"Peso noto",calStep1:"Rimuovere tutto dalla bilancia e premere Imposta zero.",calStep2:"Posizionare il peso noto sulla bilancia.",setZero:"Imposta zero",calibrateNow:"Calibra",calibrated:"Calibrato",tareSet:"Comando tara inviato. In attesa del dispositivo...",tareComplete:"Tara completata!",tareTimedOut:"Tempo scaduto per la tara — il demone SpoolBuddy è in esecuzione?",tareFailed:"Invio comando tara fallito",zeroSet:"Punto zero impostato. Posizionare il peso noto sulla bilancia.",calibrationDone:"Calibrazione completata!",calibrationFailed:"Calibrazione fallita",lastCalibrated:"Ultima calibrazione",stable:"Stabile",settling:"Stabilizzazione...",firmware:"Firmware",scale:"Bilancia",noDevice:"Nessun dispositivo SpoolBuddy trovato",daemonVersion:"Versione daemon",currentVersion:"Attuale",versionPending:"In attesa del daemon...",checking:"Verifica...",checkUpdates:"Verifica aggiornamenti",updateAvailable:"Aggiornamento disponibile",updateInstructions:"Aggiorna via SSH: esegui lo script di installazione SpoolBuddy.",upToDate:"Aggiornato",includeBeta:"Includi versioni beta",systemConfig:"Backend & autenticazione",backendUrl:"URL backend Bambuddy",apiToken:"Token API",apiTokenPlaceholder:"Inserisci token API",saveConfig:"Salva configurazione",systemQueued:"Configurazione in coda.",systemFieldsRequired:"L'URL del backend è obbligatorio.",nfcDiagnostic:"Diagnostica NFC",scaleDiagnostic:"Diagnostica bilancia",readTagDiagnostic:"Diagnostica lettura tag",testNfc:"Test lettore",testScale:"Test precisione",testReadTag:"Leggi tag"},writeTag:{tabExisting:"Bobina esistente",tabNew:"Nuova bobina",tabReplace:"Sostituisci tag",searchPlaceholder:"Cerca per materiale, colore, marca...",noUntaggedSpools:"Nessuna bobina senza tag",noTaggedSpools:"Nessuna bobina con tag",selectSpool:"Seleziona una bobina, poi posiziona un NTAG sul lettore",placeTag:"Posiziona un NTAG sul lettore",tagReady:"Tag rilevato — pronto per la scrittura",writeTag:"Scrivi tag",replaceTag:"Sostituisci tag",writing:"Scrittura tag...",waiting:"In attesa di SpoolBuddy...",writeSuccess:"Tag scritto con successo!",writeFailed:"Scrittura fallita",queueFailed:"Impossibile accodare il comando di scrittura",tryAgain:"Riprova",cancel:"Annulla",replaceWarning:"Il vecchio tag verrà scollegato. Il nuovo tag lo sostituirà.",deviceOffline:"SpoolBuddy è offline",material:"Materiale",colorName:"Nome colore",color:"Colore",brand:"Marca",weight:"Peso (g)",createSpool:"Crea bobina",creating:"Creazione...",spoolCreated:"Bobina creata! Pronto per la scrittura.",createFailed:"Impossibile creare la bobina",incompleteDataWarning:"Tag scritto con dati Spoolman incompleti"},quickMenu:{printerPower:"Alimentazione stampante",systemControls:"Sistema",restartDaemon:"Riavvia daemon",restartBrowser:"Riavvia browser",reboot:"Riavvia",shutdown:"Spegni",swipeToClose:"Scorri verso il basso per chiudere",confirmTitle:"Conferma",confirmShutdown:"Sei sicuro di voler spegnere lo SpoolBuddy? Avrai bisogno di accesso fisico per riaccenderlo.",confirmReboot:"Sei sicuro di voler riavviare lo SpoolBuddy?",confirmRestartDaemon:"Riavviare il daemon SpoolBuddy? NFC e bilancia saranno temporaneamente non disponibili.",confirmRestartBrowser:"Riavviare il browser kiosk? Lo schermo diventerà brevemente nero.",confirm:"Conferma",confirmPlugOn:"Accendere {{name}}?",confirmPlugOff:"Spegnere {{name}}?",turnOn:"Accendi",turnOff:"Spegni"}},diagnostic:{modalTitle:"Diagnostica connessione — {{name}}",running:"Diagnostica in corso...",runningElapsed:"Diagnostica in corso... ({{elapsed}}s)",waitingForReportHint:"In attesa che la stampante pubblichi un report di stato — può richiedere fino a {{max}} secondi.",runFailed:"Impossibile eseguire la diagnostica: {{error}}",retry:"Esegui di nuovo",runButton:"Esegui diagnostica",sectionTitle:"Diagnostica connessione",sectionDescription:"Verifica perché una stampante non si connette o non stampa — raggiungibilità delle porte, modalità sviluppatore LAN, modalità di rete Docker e credenziali.",noPrinters:"Nessuna stampante configurata.",overall:{ok:"Nessun problema rilevato — la connessione della stampante sembra a posto.",warnings:"La stampante dovrebbe funzionare, ma alcuni aspetti richiedono attenzione.",problems:"Sono stati rilevati problemi che spiegano perché la stampante non si connette o non stampa."},check:{port_mqtt:{title:"Porta di controllo (MQTT 8883)",pass:"Raggiungibile — la stampante accetta connessioni di controllo.",fail:"La porta 8883 non è raggiungibile. La stampante è spenta, ha un altro indirizzo IP oppure un firewall la blocca. Verifica l'IP della stampante e che nulla blocchi la porta 8883."},port_ftps:{title:"Porta trasferimento file (FTPS 990)",pass:"Raggiungibile — l'invio dei file di stampa funzionerà.",warn:"La porta 990 non è raggiungibile. Il monitoraggio potrebbe ancora funzionare, ma l'invio delle stampe alla stampante fallirà. Assicurati che la porta 990 non sia bloccata."},port_rtsps:{title:"Porta fotocamera (RTSPS 322)",pass:"Raggiungibile — lo streaming della fotocamera funzionerà.",warn:"La porta 322 non è raggiungibile. La visualizzazione live della fotocamera non funzionerà. Questo non influisce sulla stampa."},network_mode:{title:"Modalità di rete Docker",pass:"In esecuzione in modalità di rete host.",warn:'Bambuddy è in esecuzione con la rete Docker bridge. Il rilevamento delle stampanti e la stampante virtuale richiedono la modalità di rete host — ricrea il container con "network_mode: host".',skip:"Non in esecuzione in Docker — non applicabile."},subnet:{title:"Sottorete",pass:"La stampante e Bambuddy sono nella stessa sottorete.",warn:"La stampante ({{printer_ip}}) e Bambuddy ({{host_ip}}) sono in sottoreti diverse. Potrebbero non raggiungersi a meno che non sia configurato il routing tra le sottoreti.",skip:"Impossibile determinare la sottorete — ignorato."},mqtt_auth:{title:"Credenziali stampante",pass:"La stampante ha accettato la connessione.",fail:"La stampante è raggiungibile ma ha rifiutato la connessione. Il codice di accesso o il numero di serie è molto probabilmente errato. Il codice di accesso cambia ogni volta che la modalità sviluppatore viene attivata/disattivata — ricopialo dallo schermo della stampante.",skip:"Non verificato — impossibile raggiungere la stampante."},developer_mode:{title:"Modalità sviluppatore LAN",pass:"La modalità sviluppatore è attivata.",fail:"La modalità sviluppatore è DISATTIVATA sulla stampante. Attivala nelle impostazioni LAN della stampante — e conferma con OK. Senza di essa le stampe non verranno avviate.",skip:"Impossibile verificare — richiede una connessione attiva alla stampante."},printer_publishing:{title:"La stampante pubblica lo stato",pass:"La stampante sta pubblicando aggiornamenti di stato — AMS, filamenti e profili K saranno correttamente replicati nello slicer.",fail:"Il broker MQTT ha accettato la connessione ma la stampante non ha pubblicato alcun report di stato. È quasi sempre un numero di serie errato o con maiuscole/minuscole sbagliate — il topic device/<serial>/report distingue tra maiuscole e minuscole. Confronta il numero di serie nelle impostazioni della stampante con quello mostrato sullo schermo del dispositivo.",skip:"Impossibile verificare — richiede una connessione attiva alla stampante."}}},systemHealth:{sectionTitle:"Stato del sistema",sectionDescription:"Analizza i log recenti alla ricerca di problemi noti che di solito puoi risolvere da solo, prima che diventino un ticket di assistenza.",rescan:"Analizza di nuovo",clean:"Nessun problema noto trovato nelle ultime {{times}} voci di log.",logUnavailable:"La registrazione su file è disattivata, quindi i log non possono essere analizzati. Attiva la registrazione su file per usare questo controllo.",learnMore:"Come risolvere",fixLabel:"Soluzione:",occurrences:"Visto {{times}}× — ultima volta alle {{lastSeen}}",category:{layer8:"Puoi risolverlo tu",environment:"Ambiente",bug:"Segnalalo, per favore"},signature:{"ftp-auth-rejected":{name:"La stampante ha rifiutato il codice di accesso",cause:"La stampante ha rifiutato l'accesso per il trasferimento file. Il codice di accesso è errato oppure è cambiato dopo aver attivato la Modalità Sviluppatore.",fix:"Ricopia il codice di accesso dallo schermo della stampante (impostazioni LAN) e aggiornalo nelle impostazioni della stampante in Bambuddy."},"ftp-connection-timeout":{name:"Timeout della connessione di trasferimento file",cause:"Bambuddy non è riuscito a raggiungere la porta di trasferimento file della stampante (FTPS 990). La porta è bloccata, oppure la stampante è spenta o in un'altra sottorete.",fix:"Assicurati che nulla blocchi la porta 990 tra Bambuddy e la stampante e che entrambi siano sulla stessa rete."},"ftp-ssl-error":{name:"Handshake sicuro del trasferimento file non riuscito",cause:"L'handshake TLS con il server di trasferimento file della stampante non è riuscito. Spesso è dovuto a un firewall o a un firmware della stampante obsoleto.",fix:"Aggiorna il firmware della stampante e verifica che nessun firewall o proxy intercetti la connessione sulla porta 990."},"mqtt-connection-flapping":{name:"La connessione alla stampante cade di continuo",cause:"La connessione di controllo (MQTT 8883) si disconnette e si riconnette ripetutamente, di solito per una rete debole o una porta parzialmente bloccata.",fix:"Controlla il segnale Wi-Fi vicino alla stampante, preferisci una connessione cablata e assicurati che la porta 8883 sia raggiungibile in modo affidabile."},"camera-connection-refused":{name:"Flusso della telecamera non raggiungibile",cause:"Non è stato possibile raggiungere la telecamera dal vivo sulla porta RTSPS 322. La porta è bloccata, oppure la telecamera o la visione dal vivo via LAN è disattivata sulla stampante.",fix:"Attiva la telecamera e la visione dal vivo via LAN sulla stampante e assicurati che la porta 322 non sia bloccata. Questo non influisce sulla stampa."},"database-locked":{name:"Conflitti di scrittura nel database",cause:'Il database SQLite presenta errori "database is locked" sotto carico, comune quando si usano più stampanti contemporaneamente.',fix:"Passa Bambuddy a un database PostgreSQL esterno. Consulta la guida PostgreSQL nella documentazione."}}},vpDiagnostic:{title:"Controllo configurazione — {{name}}",runButton:"Esegui controllo configurazione",running:"Controllo configurazione in corso...",runFailed:"Impossibile eseguire il controllo della configurazione: {{error}}",retry:"Esegui di nuovo",overall:{ok:"Tutti i controlli superati — questa stampante virtuale è configurata correttamente.",warnings:"La stampante virtuale dovrebbe funzionare, ma alcuni aspetti richiedono attenzione.",problems:"Sono stati trovati problemi che spiegano perché lo slicer non riesce a vedere o usare questa stampante virtuale."},check:{enabled:{title:"Stampante virtuale abilitata",fail:"Questa stampante virtuale è spenta. Attivala per renderla rilevabile."},running:{title:"Servizi in esecuzione",fail:"La stampante virtuale è abilitata ma i suoi servizi non sono in esecuzione. Controlla il log di Bambuddy — di solito li ferma un conflitto di IP di binding o un errore di permessi."},bind_interface:{title:"Interfaccia di rete di binding",fail:`L'interfaccia di binding non è impostata o non esiste più su questo host. Scegli un'interfaccia attuale nel menu "Interfaccia di binding".`},access_code:{title:"Codice di accesso impostato",fail:"Nessun codice di accesso impostato. Allo slicer deve essere fornito lo stesso codice di accesso di 8 caratteri impostato qui."},target_printer:{title:"Stampante di destinazione",fail:"Nessuna stampante di destinazione selezionata. La modalità proxy richiede una stampante reale a cui inoltrare.",warn:"La stampante di destinazione è offline in questo momento — l'inoltro riprenderà quando si riconnetterà."},port_ftps:{title:"Servizio di caricamento file (porta {{port}})",fail:"Nulla è in ascolto sulla porta {{port}} dell'IP di binding, quindi lo slicer non può caricare i file. La causa abituale è un conflitto di porta su questa interfaccia."},port_mqtt:{title:"Servizio di controllo (porta {{port}})",fail:"Nulla è in ascolto sulla porta {{port}} dell'IP di binding, quindi lo slicer non può connettersi o mostrare lo stato."},port_bind:{title:"Servizio di rilevamento (porta {{port}})",fail:"Nulla è in ascolto sulla porta {{port}} dell'IP di binding, quindi l'handshake di rilevamento dello slicer fallisce."},certificate:{title:"Certificato TLS",pass:"Certificato pronto. Assicurati che il certificato CA di Bambuddy (sopra) sia importato nell'archivio attendibile del tuo slicer.",fail:"Il certificato TLS per questa stampante virtuale è mancante. Verifica che la directory dei dati di Bambuddy sia scrivibile."}}},bugReport:{logHealthSummary:"Trovati problemi noti nei tuoi log",logHealthIntro:"I log recenti corrispondono a problemi noti. Controlla le soluzioni qui sotto: risolverle potrebbe sistemare il problema senza una segnalazione di bug. Puoi comunque inviare una segnalazione qui sotto.",title:"Segnala un bug",description:"Descrizione",descriptionPlaceholder:"Cosa è andato storto? Descrivi il problema...",email:"Email (opzionale)",emailPlaceholder:"tua@email.it",emailPrivacy:"Se fornita, la tua email sarà inclusa in una sezione compressa dell'issue GitHub per permettere al manutentore di contattarti.",screenshot:"Schermata",uploadOrPaste:"Carica, incolla o trascina un'immagine",dataCollectedSummary:"Quali dati sono inclusi nel report?",dataIncluded:"Inclusi:",dataIncludedList:"Versione app, OS, architettura, versione Python, statistiche database (solo conteggi), modelli stampante, numero ugelli, versioni firmware, stato connessione, stato integrazioni (Spoolman, MQTT, HA), impostazioni non sensibili, conteggio interfacce di rete, dettagli Docker, versioni dipendenze.",dataNeverIncluded:"Mai inclusi:",dataNeverIncludedList:"Nomi stampanti, numeri di serie, codici di accesso, password, indirizzi IP, indirizzi email, chiavi API, token, URL webhook, nomi host o nomi utente.",submit:"Invia",startLogging:"Avvia registrazione debug",stepEnableLogging:"Registrazione debug attivata",stepReproduce:"Riproduci il problema ora",stepStopLogging:"Ferma & invia rapporto",stopAndSubmit:"Ferma & Invia",maxDuration:"Arresto automatico dopo {{minutes}} min",stoppingLogs:"Raccolta log & invio...",submitting:"Invio segnalazione bug...",submittingStepConnection:"Controlli di connettività delle stampanti in corso",submittingStepVirtualPrinters:"Controlli di configurazione delle stampanti virtuali in corso",submittingStepLogScan:"Analisi dei log recenti per problemi noti",submittingStepSubmit:"Invio del report a GitHub",submitSuccess:"Segnalazione bug inviata con successo!",submitFailed:"Impossibile inviare la segnalazione bug",diagnosticChecking:"Verifica delle connessioni delle stampanti...",diagnosticHealthy:"Verifica della connessione superata — nessun problema rilevato sulle tue stampanti.",diagnosticSummary:"{{problems}} stampanti su {{total}} hanno problemi di connessione",diagnosticIntro:"Una o più stampanti hanno un problema di connessione che potrebbe essere la causa del tuo problema. Espandi una stampante qui sotto per vedere la soluzione — risolverla potrebbe sistemare il problema senza una segnalazione di bug. Puoi comunque inviare una segnalazione qui sotto.",thankYou:"Grazie!",submitted:"La tua segnalazione bug è stata inviata.",viewIssue:"Vedi issue",unexpectedError:"Si è verificato un errore imprevisto"},failureDetection:{title:"Rilevamento guasti con IA",description:"Monitora le stampe tramite un'API ML Obico auto-ospitata e agisce automaticamente sui guasti rilevati.",mlUrl:"URL API ML Obico",mlUrlHint:"URL base del tuo container Obico ml_api auto-ospitato (es. http://192.168.1.10:3333).",test:"Prova",testSuccess:"API ML raggiungibile e funzionante.",testFailed:"Impossibile raggiungere l'API ML.",sensitivity:"Sensibilità",sensitivityLow:"Bassa (meno falsi positivi)",sensitivityMedium:"Media (bilanciata)",sensitivityHigh:"Alta (rilevamento precoce, più falsi positivi)",sensitivityHint:"Regola le soglie di confidenza che attivano avvisi e guasti.",action:"Azione al guasto rilevato",actionNotify:"Solo notifica",actionPause:"Metti in pausa",actionPauseOff:"Pausa e stacca corrente",pollInterval:"Intervallo di controllo (secondi)",pollIntervalHint:"Frequenza di controllo di ogni stampante durante la stampa. Minimo 5s, massimo 120s.",externalUrlMissing:"URL esterno non impostato.",externalUrlHint:"L'API ML recupera l'istantanea della telecamera tramite URL. Imposta l'URL esterno nelle impostazioni generali in modo che il container API ML possa raggiungere Bambuddy.",perPrinterTitle:"Stampanti monitorate",perPrinterHint:"Scegli quali stampanti il servizio di rilevamento deve monitorare.",monitorAll:"Monitora tutte le stampanti connesse",statusTitle:"Stato",serviceRunning:"Servizio in esecuzione",thresholds:"Soglie bassa / alta",activePrinters:"Stampe attive",noActivePrints:"Nessuna stampa in corso.",historyTitle:"Rilevamenti recenti",noHistory:"Nessun rilevamento finora."},makerworld:{title:"MakerWorld",description:"Incolla un URL di un modello MakerWorld per importarlo e stamparlo direttamente da Bambuddy — senza passare dall'app Bambu Handy.",pasteUrlHeader:"Importa da MakerWorld",pasteUrlPlaceholder:"https://makerworld.com/en/models/… o incolla qualsiasi link MakerWorld",resolveButton:"Risolvi",signInRequiredTitle:"Accesso Bambu Cloud richiesto per scaricare",signInRequiredBody:"Puoi consultare i dettagli del modello in modo anonimo, ma MakerWorld richiede un account Bambu Cloud per scaricare i file 3MF.",openCloudSettings:"Apri impostazioni Cloud",untitledModel:"Modello senza titolo",byCreator:"di {{name}}",downloadsCount:"{{count}} download",licensePrefix:"Licenza",alreadyImported:"Già nella libreria",openOnMakerworld:"Apri su MakerWorld",alreadyInLibrary:"Questo modello è già nella tua libreria — lo trovi in Gestione file → MakerWorld",importSuccess:"{{filename}} importato — salvato in Gestione file → MakerWorld",platesHeader:"Piatti ({{count}})",plateDefaultName:"Piatto {{n}}",materialCount:"{{count}} filamenti",amsRequired:"AMS richiesto",slicedFor:"Sezionato per {{printer}}",alsoCompatible:"Anche contrassegnato come compatibile: {{printers}}",importToLibrary:"Salva",sliceIn:"Salva e affetta in {{slicer}}",disclaimer:"L'integrazione MakerWorld utilizza endpoint API documentati dalla community. Bambuddy non è affiliato né approvato da MakerWorld o Bambu Lab.",lastImportSuccess:"Importato nella tua libreria",lastImportAlreadyInLibrary:"Già nella tua libreria",viewInLibrary:"Visualizza in Gestione file",openInBambuStudio:"Apri in Bambu Studio",openInOrcaSlicer:"Apri in OrcaSlicer",importTo:"Importa in Gestione file",recentImportsHeader:"Importazioni recenti",phaseResolving:"Risoluzione",phaseDownloading:"Download",folderAuto:"MakerWorld (predefinita)",importAll:"Importa tutto",importAllProgress:"Importazione {{current}}/{{total}}",openGallery:"Apri galleria immagini",galleryPrev:"Immagine precedente",galleryNext:"Immagine successiva",deleteImport:"Rimuovi dalla libreria",importDeleting:"Rimozione…",importDeleted:"Rimosso dalla libreria",confirmDelete:"Rimuovere {{filename}} dalla libreria? Il file locale verrà eliminato, ma il piatto può essere re-importato da MakerWorld.",errors:{resolveFailed:"Impossibile risolvere questo URL MakerWorld.",downloadFailed:"Download non riuscito. Riprova.",deleteFailed:"Impossibile rimuovere il file dalla libreria."}},gcodeViewer:{back:"Indietro",backToArchives:"Torna agli archivi di stampa",backToFiles:"Torna al gestore file"},libraryTrash:{title:"Cestino",headerButton:"Cestino",headerTooltip:"Visualizza i file spostati nel cestino",backToFiles:"Torna al gestore file",subtitleAdmin:"I file eliminati restano qui per {{days}} giorni, poi vengono rimossi automaticamente. Questa vista mostra il cestino di tutti gli utenti.",subtitleUser:"I file eliminati restano qui per {{days}} giorni, poi vengono rimossi automaticamente.",loading:"Caricamento del cestino…",loadError:"Impossibile caricare il cestino.",empty:"Il cestino è vuoto.",summary:"{{count}} file · {{size}}",emptyTrash:"Svuota cestino",restore:"Ripristina",purgeNow:"Elimina ora",autoPurgeIn:"Eliminazione automatica tra {{when}}",days:"giorni",retentionLabel:"Elimina automaticamente dopo",selectAll:"Seleziona tutto",selectOne:"Seleziona {{filename}}",selectionCount:"{{count}} selezionati",bulkRestore:"Ripristina selezionati",bulkPurge:"Elimina selezionati",col:{filename:"File",folder:"Cartella",size:"Dimensione",deleted:"Spostato nel cestino",autoPurge:"Eliminazione auto.",owner:"Proprietario",actions:"Azioni"},confirm:{purgeTitle:"Eliminare definitivamente?",purgeBody:"{{filename}} verrà eliminato dal disco e non potrà essere ripristinato.",emptyTitle:"Svuotare il cestino?",emptyBody:"Tutti i {{count}} file verranno eliminati dal disco. Azione non annullabile.",bulkPurgeTitle:"Eliminare definitivamente i file selezionati?",bulkPurgeBody:"I {{count}} file selezionati verranno eliminati dal disco e non potranno essere ripristinati.",cta:"Elimina definitivamente"},toast:{restored:"File ripristinato.",restoreFailed:"Impossibile ripristinare il file.",purged:"File eliminato definitivamente.",purgeFailed:"Impossibile eliminare il file.",emptied:"{{count}} file eliminati dal cestino.",emptyFailed:"Impossibile svuotare il cestino.",retentionSaved:"Eliminazione automatica impostata su {{days}} giorni.",retentionFailed:"Impossibile salvare l'impostazione di conservazione.",bulkRestored:"{{count}} file ripristinati.",bulkPurged:"{{count}} file eliminati."}},libraryPurge:{title:"Elimina file vecchi",headerButton:"Elimina vecchi",headerTooltip:"Sposta in blocco i file vecchi nel cestino",description:"I file più vecchi della soglia verranno spostati nel cestino. Le cartelle esterne vengono ignorate. Puoi ripristinarli dal cestino prima dell'eliminazione automatica.",ageLabel:"Sposta i file più vecchi di",days:"giorni",includeNeverPrinted:"Includi i file mai stampati",effectsTitle:"Cosa succede quando fai clic su Pulisci",effect1:"I file corrispondenti vengono spostati nel cestino — non sono ancora eliminati dal disco.",effect2:"Puoi ripristinarli dal cestino in qualsiasi momento fino alla scadenza del periodo di conservazione.",effect3:"Dopo il periodo di conservazione, lo spazzino del cestino li rimuove definitivamente.",effect4:"I file in cartelle esterne (collegate) vengono saltati — Bambuddy non elimina mai dati che non possiede.",previewLoading:"Verifica quanti file corrispondono…",previewFailed:"Impossibile mostrare l'anteprima.",previewSummary:"{{count}} file · {{size}} verrebbero spostati nel cestino",andMore:"…e altri {{count}}",warning:"I file vengono eliminati in modo soft — puoi ripristinarli dal cestino fino alla scadenza del periodo di conservazione.",confirmCta:"Sposta {{count}} nel cestino",purging:"Spostamento nel cestino…",toast:{success:"{{count}} file spostati nel cestino.",failed:"Impossibile eliminare i file."}},libraryAutoPurge:{enableLabel:"Elimina automaticamente i file vecchi",enableDescription:"Esegue l'eliminazione amministrativa una volta al giorno. I file finiscono prima nel cestino — non vengono eliminati immediatamente.",ageLabel:"Elimina automaticamente i file più vecchi di",ageDescription:"Minimo 7 giorni, massimo 10 anni. Usa la stessa regola di età del pulsante Elimina manuale.",days:"giorni",includeNeverPrinted:"Includi i file mai stampati",saveFailed:"Impossibile salvare le impostazioni di eliminazione automatica."},archivePurge:{headerButton:"Elimina vecchi",headerTooltip:"Eliminazione massiva vecchi archivi",title:"Elimina vecchi archivi",description:"Cancella la vecchia cronologia di stampa. Ogni archivio invecchia in base alla sua ultima stampa completata — ristampare azzera l'età, quindi il lavoro attivo non viene mai eliminato.",ageLabel:"Elimina archivi non stampati negli ultimi",days:"giorni",effectsTitle:"Cosa succede quando fai clic su Pulisci",effect1:"Ogni archivio corrispondente viene nascosto dagli elenchi e i suoi file vengono rimossi dal disco (3MF, miniatura, timelapse, 3MF sorgente, F3D, foto).",effect2:"La riga dell'archivio rimane nel database, così le Quick Stats conservano il contributo di filamento, tempo, costo ed energia — come il comportamento predefinito dell'eliminazione singola.",effect3:"Spunta «Rimuovi anche dalle statistiche» qui sotto per eliminare anche il contributo dalle Quick Stats (equivalente all'opzione dell'eliminazione singola). Questo percorso è irreversibile.",effect4:"Ristampare un archivio azzera il suo conteggio dell'età, quindi gli archivi attivi sono al sicuro.",purgeStatsLabel:"Rimuovi anche dalle statistiche",purgeStatsHint:"Rimuove gli archivi selezionati dalle Quick Stats (filamento, tempo, costo, energia). Senza questa opzione le Quick Stats conservano ogni contributo e solo i file vengono cancellati.",previewLoading:"Verifica del numero di archivi corrispondenti…",previewFailed:"Impossibile visualizzare l'anteprima della pulizia.",previewSummary:"{{count}} archivi · {{size}} verrebbero rimossi",andMore:"…e altri {{count}}",warning:"I file vengono rimossi dal disco e non possono essere ripristinati. Scarica o aggiungi ai preferiti tutto ciò che vuoi conservare prima di continuare.",confirmCta:"Rimuovi {{count}} archivio(i)",purging:"Rimozione…",toast:{success:"{{count}} archivio(i) rimosso.",failed:"Impossibile eliminare gli archivi."}},archiveAutoPurge:{enableLabel:"Elimina auto. vecchi archivi",enableDescription:"Una volta al giorno nasconde dagli elenchi gli archivi non stampati entro la soglia e rimuove i loro file dal disco. Ristampare azzera il timer.",ageLabel:"Eliminazione auto. di archivi non stampati negli ultimi",ageDescription:"Minimo 7 giorni, massimo 10 anni. Basato sull'ultima stampa completata — ristampare azzera l'età. Rimuove 3MF, miniatura, timelapse, 3MF sorgente, F3D e foto.",days:"giorni",purgeStatsLabel:"Rimuovi anche dalle statistiche",purgeStatsDescription:"Quando abilitato, lo sweeper giornaliero elimina anche il contributo di ogni archivio purgato dalle Quick Stats (filamento, tempo, costo, energia). Disabilitato per impostazione predefinita — le Quick Stats mantengono il contributo e solo i file vengono cancellati.",runNow:"Elimina archivi ora",saveFailed:"Impossibile salvare le impostazioni di pulizia automatica."},cameraTokens:{title:"Token API telecamera",navTitle:"Token API telecamera",description:"Token a lunga durata per incorporare lo stream della telecamera in Home Assistant, Frigate, chioschi o qualsiasi altro strumento che richieda un URL stabile. Ogni token è limitato allo stream della telecamera e può essere revocato in qualsiasi momento.",loading:"Caricamento…",confirmRevoke:{title:"Revocare questo token?",body:`Qualsiasi dispositivo che usa "{{name}}" perderà l'accesso immediatamente. Non può essere annullato.`,cancel:"Annulla",confirm:"Revoca"},create:{title:"Crea nuovo token",nameLabel:"Nome token",namePlaceholder:"es. Home Assistant",daysLabel:"Giorni alla scadenza",submit:"Crea",hint:"Durata massima 365 giorni. Il valore del token viene mostrato solo alla creazione — copialo ora."},created:{title:"Token creato – copialo ora",warning:"Questa è l'unica volta in cui questo token sarà visibile. Dopo la chiusura di questa finestra non potrai più visualizzarlo.",copy:"Copia",dismiss:"L'ho salvato"},list:{myTitle:"I miei token",allTitle:"Tutti gli utenti (vista admin)",empty:"Nessun token ancora.",name:"Nome",owner:"Proprietario",prefix:"Prefisso",created:"Creato",expires:"Scade",lastUsed:"Ultimo uso",revoke:"Revoca",expired:"Scaduto"},toast:{created:"Token creato",createFailed:"Creazione token fallita",revoked:"Token revocato",revokeFailed:"Revoca token fallita",loadFailed:"Caricamento token fallito",copied:"Copiato negli appunti",copyFailed:"Copia non riuscita – seleziona e copia manualmente"}},forecast:{title:"Previsione scorte",noSpools:"Nessuna bobina attiva trovata. Aggiungi bobine al tuo inventario per vedere i dati di previsione.",noUsageData:"Nessun dato di utilizzo disponibile — impossibile proiettare la timeline delle scorte.",sku:"SKU",material:"Materiale",stock:"Scorte",dailyRate:"Tasso",daysLeft:"Giorni rimanenti",emptyBy:"Esaurimento previsto",reorderBy:"Riordinare entro",actions:"Azioni",trend:"Tendenza",estimated:"Stim.",noData:"Nessun dato",timeframe:"Periodo",chartTitle:"Stock proiettato — Top 5 materiali",dashedLinesROP:"Linee tratteggiate = punti di riordino",stockLevel:"Livello scorte",reorderPoint:"Punto di riordino",safetyMargin:"Margine di sicurezza",trendLegend:"Tendenza (basata su storico, livello servizio 95%)",estimatedLegend:"Stimata (delta peso)",noDataLegend:"Nessun dato",ropLabel:"PR",ssLabel:"SS",safetyStockLegend:"Scorta di sicurezza",stockArrivalLegend:"Arrivo merce",stockoutLegend:"Esaurimento scorte",alertCount_one:"{{count}} avviso",alertCount_other:"{{count}} avvisi",order:"Ordina",globalLeadTime:"Lead time globale",globalLeadTimeHint:"Lead time globale minimo — usato nel calcolo del punto di riordino per tutti gli SKU",save:"Salva",cancel:"Annulla",settingsSaved:"Impostazioni salvate",failedSaveSettings:"Impossibile salvare le impostazioni",globalLeadTimeSaved:"Lead time globale salvato",skuLeadTimeOverride:"Override lead time SKU",skuLeadTimeHint:"0 = usa lead time globale. Imposta >0 per sovrascrivere per questo SKU.",safetyMarginLabel:"Margine di sicurezza",effectiveLeadTime:"Lead time effettivo",effectiveLeadTimeHint:"max(globale {{global}}g, SKU {{sku}}g)",reorderPointHint:"d̄ × LT + safety margin — ordina quando le scorte raggiungono questo livello",safetyMarginHint:"Scorta di sicurezza statistica (z=1,65 × σ × √LT) + buffer definito dall'utente",safetyMarginHintDays:"Buffer aggiunto sulla scorta di sicurezza statistica.{{approx}}",safetyMarginHintDaysApprox:" ≈ {{g}}g al tasso attuale.",safetyMarginHintG:"Buffer di peso fisso aggiunto sulla scorta di sicurezza statistica.{{approx}}",safetyMarginHintGApprox:" ≈ {{days}}g al tasso attuale.",individualSpools:"Bobine singole",labelWeight:"Etichetta",spoolCount_one:"{{count}} bobina",spoolCount_other:"{{count}} bobine",stockBreakRisk:"Rischio di rottura scorte",stockBreakBefore:"Rottura scorte prima del rifornimento",stockBreakDetail:"{{days}}g rimanenti, lead time {{lt}}g.",reorderNow:"Riordina ora",reorderTriggerPassed:"La data di attivazione {{date}} è passata.",shoppingList:"Lista della spesa",shoppingListItems_one:"({{count}} articolo)",shoppingListItems_other:"({{count}} articoli)",shoppingListEmpty:"La lista della spesa è vuota. Clicca sull'icona del carrello in qualsiasi riga per aggiungere articoli.",addToCart:"Aggiungi alla lista della spesa",alertsSnoozed:"Silenzia avvisi per questo SKU",alertsEnabled:"Riattiva avvisi per questo SKU",addedToCart:"Aggiunto alla lista della spesa",failedAddItem:"Impossibile aggiungere l'articolo",listView:"Lista",logisticsView:"Logistica",qty:"Qtà",weight:"Peso",leadTime:"Lead time",expectedRestock:"Rifornimento previsto",status:"Stato",note:"Nota",pending:"In attesa",purchased:"Acquistato",received:"Ricevuto",markPurchased:"Segna come acquistato",markReceived:"Segna come ricevuto — aggiunge bobine all'inventario",resetToPending:"Ripristina in attesa",remove:"Rimuovi",clearAll:"Cancella tutto",downloadCsv:"CSV",addToCartTitle:"Aggiungi alla lista della spesa",byQuantity:"Per quantità",byDuration:"Per durata",numberOfSpools:"Numero di bobine",lastHowManyDays:"Per quanti giorni deve durare?",noUsageQty:"Nessun dato di utilizzo — quantità impostata a 1.",noteOptional:"Nota (opzionale)",notePlaceholder:"es. per il progetto X, urgente…",addNSpools_one:"Aggiungi {{count}} bobina",addNSpools_other:"Aggiungi {{count}} bobine",onArrival:"All'arrivo",stockBreakIn:"Rottura scorte tra {{days}}g.",stockRunsOutBefore:"Le scorte si esauriscono prima dello scadere del lead time di {{lt}}g.",atRate:"A {{rate}}g/giorno hai bisogno di",moreSpools_one:"{{count}} bobina in più",moreSpools_other:"{{count}} bobine in più",bridgeGap:"per colmare il divario.",noReadAccess:"Non hai il permesso di visualizzare le previsioni di inventario.",noWriteAccess:"Non hai il permesso di modificare le impostazioni di previsione."}},_pe={nav:{printers:"프린터",archives:"아카이브",queue:"대기열",stats:"통계",profiles:"프로필",maintenance:"유지보수",projects:"프로젝트",inventory:"필라멘트",files:"파일 관리자",makerworld:"MakerWorld",notifications:"알림",settings:"설정",system:"시스템",collapseSidebar:"사이드바 접기",expandSidebar:"사이드바 펼치기",update:"업데이트",updateAvailable:"업데이트 가능: v{{version}}",updateAvailableBanner:"버전 {{version}}이(가) 출시되었습니다!",viewUpdate:"업데이트 보기",viewOnGithub:"GitHub에서 보기",keyboardShortcuts:"키보드 단축키 (?)",switchToLight:"라이트 모드로 전환",switchToDark:"다크 모드로 전환",switchToSystem:"기기 설정으로 전환",smartSwitches:"스마트 스위치",logout:"로그아웃",installApp:"앱 설치",installAppSuccess:"Bambuddy가 설치되었습니다"},common:{save:"저장",saving:"저장 중...",cancel:"취소",delete:"삭제",edit:"편집",add:"추가",close:"닫기",confirm:"확인",loading:"로딩 중...",error:"오류",errorLoading:"데이터 로딩 오류",retry:"재시도",success:"성공",warning:"경고",enabled:"활성화됨",disabled:"비활성화됨",yes:"예",no:"아니요",on:"켜짐",off:"꺼짐",all:"전체",none:"없음",search:"검색",filter:"필터",sort:"정렬",refresh:"새로고침",download:"다운로드",upload:"업로드",uploading:"업로드 중...",uploadFailed:"업로드 실패",actions:"작업",status:"상태",name:"이름",description:"설명",date:"날짜",time:"시간",hours:"시간",minutes:"분",seconds:"초",days:"일",enable:"활성화",disable:"비활성화",permissions:"권한",noPrinters:"등록된 프린터가 없습니다",noData:"데이터가 없습니다",linkNotFound:"링크를 찾을 수 없습니다",required:"필수",optional:"선택",dismiss:"닫기",apply:"적용",reset:"초기화",export:"내보내기",import:"가져오기",clear:"지우기",selectAll:"전체 선택",deselectAll:"전체 해제",noChange:"— 변경 없음 —",unchanged:"변경 없음",unassigned:"미할당",unknown:"알 수 없음",unknownError:"알 수 없는 오류",today:"오늘",tomorrow:"내일",asap:"즉시",overdue:"기한 초과",now:"지금",collapse:"접기",expand:"펼치기",viewArchive:"아카이브 보기",viewInFileManager:"파일 관리자에서 보기",addedBy:"{{username}}님이 추가함",prints:"인쇄",more:"+{{count}}개 더",ascending:"오름차순",descending:"내림차순",back:"뒤로",copy:"복사",copied:"복사됨!",printer:"프린터",remove:"제거",type:"유형",print:"인쇄",rename:"이름 변경",move:"이동",create:"만들기",duplicate:"복제",left:"왼쪽",right:"오른쪽"},printers:{title:"프린터",addPrinter:"프린터 추가",editPrinter:"프린터 편집",deletePrinter:"프린터 삭제",printerName:"프린터 이름",serialNumber:"일련번호",ipAddress:"IP 주소 / 호스트명",accessCode:"액세스 코드",model:"모델",nozzleCount:"노즐 수",autoArchive:"자동 아카이브",status:{available:"사용 가능",idle:"대기 중",printing:"인쇄 중",paused:"일시정지",offline:"오프라인",problem:"문제 발생",error:"오류",finished:"완료",unknown:"알 수 없음"},temperatures:{nozzle:"노즐",bed:"베드",chamber:"챔버"},progress:"{{percent}}% 완료",timeRemaining:"{{time}} 남음",deleteConfirm:'"{{name}}"을(를) 삭제하시겠습니까?',maintenanceOk:"유지보수 정상",maintenanceWarning:"{{count}}개 경고",maintenanceWarning_plural:"{{count}}개 경고",maintenanceDue:"{{count}}개 예정",maintenanceDue_plural:"{{count}}개 예정",sort:{name:"이름",status:"상태",model:"모델",location:"위치",ascending:"오름차순 정렬",descending:"내림차순 정렬"},cardSize:{small:"작은 카드",medium:"중간 카드",large:"큰 카드",extraLarge:"아주 큰 카드"},hideOffline:"오프라인 숨기기",nextAvailable:"다음 가용",powerOn:"전원 켜기",offlinePrintersWithPlugs:"스마트 플러그가 연결된 오프라인 프린터",noPrintersConfigured:"아직 설정된 프린터가 없습니다",search:"프린터 검색...",noSearchResults:"검색 또는 필터 조건에 맞는 프린터가 없습니다",filter:{allStatuses:"모든 상태",allLocations:"모든 위치"},toolbar:{filters:"필터",view:"보기",actions:"작업"},readyToPrint:"인쇄 준비 완료",external:"외부",extL:"외부-L",extR:"외부-R",deleteArchives:"인쇄 아카이브 삭제",noLabel:"라벨 없음",printPreview:"인쇄 미리보기",width:"너비",height:"높이",noObjectsFound:"객체를 찾을 수 없습니다",objectsLoadedOnPrintStart:"인쇄 시작 시 객체가 로드됩니다",willBeSkipped:"건너뛸 예정",name:"이름",serialCannotBeChanged:"일련번호는 변경할 수 없습니다",locationHelp:"프린터 그룹화 및 대기열 작업 필터링에 사용됩니다",wifiSignal:{veryWeak:"매우 약함",weak:"약함",fair:"보통",good:"좋음",excellent:"매우 좋음"},maintenanceUpToDate:"모든 유지보수 최신 상태 - 클릭하여 보기",chamberLightOn:"챔버 조명 켜기",chamberLightOff:"챔버 조명 끄기",files:"파일",browseFiles:"프린터 파일 탐색",autoOffAfterPrint:"인쇄 후 자동 전원 끄기",autoOffExecuted:"자동 끄기 실행됨 - 초기화하려면 프린터를 켜세요",hmsErrors:"HMS 오류",viewHmsErrors:"{{count}}개 HMS 오류 보기",resume:"재개",pause:"일시정지",stop:"정지",camera:"카메라",skipObject:"객체 건너뛰기",reconnect:"재연결",forceRefresh:"강제 새로고침",forceRefreshSuccess:"새로고침 요청됨",mqttDebug:"MQTT 디버그",printerInformation:"프린터 정보",copyToClipboard:"복사",copied:"복사됨!",state:"상태",wifiSignalLabel:"WiFi 신호",developerMode:"개발자 모드",enabled:"활성화됨",disabled:"비활성화됨",addedOn:"추가됨",sdCard:"SD 카드",inserted:"삽입됨",notInserted:"삽입되지 않음",totalPrintHours:"인쇄 시간",activeNozzle:"활성: {{nozzle}} 노즐",nozzleRack:"노즐 랙",nozzleDocked:"도킹됨",nozzleMounted:"장착됨",nozzleActive:"활성",nozzleIdle:"대기",nozzleDiameter:"직경",nozzleType:"유형",nozzleStatus:"상태",nozzleFilament:"필라멘트",nozzleWear:"마모",nozzleMaxTemp:"최대 온도",nozzleSerial:"일련번호",nozzleHardenedSteel:"경화강",nozzleStainlessSteel:"스테인리스강",nozzleTungstenCarbide:"텅스텐 카바이드",nozzleFlow:"유량",nozzleHighFlow:"고유량",nozzleStandardFlow:"표준",firmwareUpdate:"펌웨어 업데이트",firmwareInstructions:"프린터 터치스크린에서",firmwareNav:"이동",settings:"설정",firmware:"펌웨어",discoverPrinters:"프린터 검색",searching:"검색 중...",manualEntry:"수동 입력",addFromCloud:"클라우드에서 추가",toast:{printerDeleted:"프린터가 삭제되었습니다",missingSpoolAssignment:"{{printer}}에서 인쇄가 시작되었습니다. 슬롯 할당 누락: {{slots}}",printerAdded:"프린터가 추가되었습니다",printerUpdated:"프린터가 업데이트되었습니다",failedToDelete:"프린터 삭제 실패",failedToAdd:"프린터 추가 실패",failedToUpdate:"프린터 업데이트 실패",commandSent:"명령이 전송되었습니다",failedToSendCommand:"명령 전송 실패",turnedOn:"{{name}} 켜짐",failedToPowerOn:"{{name}} 전원 켜기 실패",scriptTriggered:"스크립트가 실행되었습니다",printStopped:"인쇄가 정지되었습니다",printPaused:"인쇄가 일시정지되었습니다",printResumed:"인쇄가 재개되었습니다",referenceDeleted:"참조가 삭제되었습니다",detectionAreaSaved:"감지 영역이 저장되었습니다",failedToRunScript:"스크립트 실행 실패",failedToStopPrint:"인쇄 정지 실패",failedToPausePrint:"인쇄 일시정지 실패",failedToResumePrint:"인쇄 재개 실패",failedToControlChamberLight:"챔버 조명 제어 실패",failedToSetSpeed:"인쇄 속도 설정 실패",failedToUpdateSetting:"설정 업데이트 실패",failedToSkipObjects:"객체 건너뛰기 실패",failedToRereadRfid:"RFID 재읽기 실패",failedToCheckPlate:"플레이트 확인 실패",failedToUpdateLabel:"라벨 업데이트 실패",failedToDeleteReference:"참조 삭제 실패",failedToSaveDetectionArea:"감지 영역 저장 실패",plateCheckEnabled:"플레이트 확인 활성화됨",plateCheckDisabled:"플레이트 확인 비활성화됨",calibrationSaved:"캘리브레이션이 저장되었습니다!",calibrationFailed:"캘리브레이션 실패",rfidRereadInitiated:"RFID 재읽기가 시작되었습니다",loadInitiated:"필라멘트 로딩 중…",unloadInitiated:"필라멘트 언로딩 중…",failedToLoad:"필라멘트 로드 실패",failedToUnload:"필라멘트 언로드 실패",connectionFailedNotAdded:"프린터에 연결할 수 없습니다. IP, 시리얼 번호, 액세스 코드를 확인하고 LAN 전용 모드가 켜져 있는지 확인하세요. 프린터가 추가되지 않았습니다."},connection:{connected:"연결됨",offline:"오프라인"},plateStatus:{markCleared:"플레이트 비움으로 표시",cleared:"플레이트 비워짐",notCleared:"플레이트 미비움",inUse:"플레이트 사용 중"},queue:{inQueue:"대기열에 {{count}}개",inQueue_plural:"대기열에 {{count}}개"},controls:"제어",rfid:{reread:"RFID 재읽기"},ams:{load:"로드",unload:"언로드"},bedJog:{title:"빌드 플레이트 이동",bed:"베드",step:"이동 거리 (mm)",up:"플레이트 위로",down:"플레이트 아래로",disabledWhilePrinting:"인쇄 중 비활성화됨",notHomedTitle:"프린터 홈 설정 필요",notHomedMessage:"마지막 인쇄 이후 홈 설정이 되지 않았습니다. 안전한 위치 지정을 위해 자동 홈 설정을 먼저 실행하거나, 그냥 이동하세요 — 소프트 엔드스톱이 무시됩니다.",homeZ:"자동 홈 설정",moveAnyway:"그냥 이동",homingStarted:"프린터 자동 홈 설정 중…"},permission:{noAdd:"프린터를 추가할 권한이 없습니다",noEdit:"프린터를 편집할 권한이 없습니다",noDelete:"프린터를 삭제할 권한이 없습니다",noControl:"프린터를 제어할 권한이 없습니다",noFiles:"프린터 파일에 접근할 권한이 없습니다",noAmsRfid:"AMS RFID를 재읽기할 권한이 없습니다",noSmartPlugControl:"스마트 플러그를 제어할 권한이 없습니다",noCamera:"카메라를 볼 권한이 없습니다"},modal:{addTitle:"프린터 추가",editTitle:"프린터 편집",myPrinter:"내 프린터",selectModel:"모델 선택...",locationGroup:"위치 / 그룹 (선택사항)",locationPlaceholder:"예: 작업실, 사무실, 지하실",autoArchiveLabel:"완료된 인쇄 자동 아카이브",fromPrinterSettings:"프린터 설정에서",modelOptional:"모델 (선택사항)",saveChanges:"변경사항 저장"},skipObjects:{tooltip:"객체 건너뛰기",onlyWhilePrinting:"객체 건너뛰기 (인쇄 중에만)",requiresMultiple:"객체 건너뛰기 (2개 이상 필요)",title:"객체 건너뛰기",matchIdsInfo:"프린터 화면의 ID와 일치",printerShowsIds:"프린터 화면에서 빌드 플레이트의 객체 ID를 표시합니다",skipSelected:"선택 항목 건너뛰기",skipping:"건너뛰는 중...",noObjectsSelected:"선택된 객체 없음",selectObjectsToSkip:"현재 인쇄에서 건너뛸 객체를 선택하세요",skipped:"건너뜀",objectsSkipped:"객체가 건너뛰어졌습니다",activeCount:"{{count}}개 활성",waitForLayer:"객체를 건너뛰려면 2층 이상을 기다리세요 (현재 {{layer}}층)",skip:"건너뛰기",confirmTitle:"객체를 건너뛰시겠습니까?",confirmMessage:'"{{name}}"을(를) 건너뛰시겠습니까? 이 작업은 취소할 수 없습니다.'},confirm:{deleteTitle:"프린터 삭제",deleteMessage:'"{{name}}"을(를) 삭제하시겠습니까? 모든 연결 설정이 제거됩니다.',deleteArchivesNote:"이 프린터의 모든 인쇄 기록이 영구적으로 삭제됩니다.",keepArchivesNote:"인쇄 기록은 유지되지만 이 프린터와 연결이 해제됩니다.",stopTitle:"인쇄 정지",stopMessage:'"{{name}}"의 현재 인쇄를 정지하시겠습니까? 인쇄 작업이 취소됩니다.',stopButton:"인쇄 정지",pauseTitle:"인쇄 일시정지",pauseMessage:'"{{name}}"의 현재 인쇄를 일시정지하시겠습니까?',pauseButton:"인쇄 일시정지",resumeTitle:"인쇄 재개",resumeMessage:'"{{name}}"의 인쇄를 재개하시겠습니까?',resumeButton:"인쇄 재개",powerOnTitle:"프린터 전원 켜기",powerOnMessage:'"{{name}}"의 전원을 켜시겠습니까?',powerOnButton:"전원 켜기",powerOffTitle:"프린터 전원 끄기",powerOffMessage:'"{{name}}"의 전원을 끄시겠습니까?',powerOffWarning:'경고: "{{name}}"이(가) 현재 인쇄 중입니다! 전원을 끄시겠습니까? 인쇄가 중단되고 프린터가 손상될 수 있습니다.',powerOffButton:"전원 끄기",haToggleTitle:'"{{name}}" 토글',haToggleMessage:"Home Assistant 엔티티 {{entity}}를 토글하시겠습니까? 현재 켜져 있으면 전원이 꺼질 수 있습니다.",haToggleWarning:'경고: "{{name}}"이(가) 현재 인쇄 중입니다! {{entity}}를 토글하면 전원이 차단되어 인쇄가 중단될 수 있습니다. 계속하시겠습니까?',haToggleButton:"토글"},bulk:{select:"선택",selectAll:"전체 선택",selectByLocation:"위치별 선택",selected:"{{count}}개 선택됨",actions:{stop:"정지",pause:"일시정지",resume:"재개",clearPlate:"베드 비우기",clearHMS:"알림 지우기"},confirm:{stopTitle:"{{count}}개 인쇄 정지",stopMessage:"{{count}}개 프린터의 활성 인쇄를 취소합니다. 이 작업은 취소할 수 없습니다.",stopButton:"모두 정지",pauseTitle:"{{count}}개 인쇄 일시정지",pauseMessage:"{{count}}개 프린터의 활성 인쇄를 일시정지합니다.",pauseButton:"모두 일시정지",clearPlateTitle:"{{count}}개 인쇄 베드 비우기",clearPlateMessage:"{{count}}개 프린터의 인쇄 베드를 비우고 대기열 작업을 시작할 수 있습니다.",clearPlateButton:"모두 비우기"},success:"{{count}}개 프린터에서 {{action}} 완료",partial:"{{succeeded}}개 성공, {{failed}}개 실패",noneApplicable:"선택된 프린터 중 이 작업에 적합한 상태의 프린터가 없습니다",selectByState:"상태별 선택"},discovery:{title:"프린터 검색",searching:"검색 중...",scanning:"스캔 중...",scanProgress:"스캔 중... {{scanned}}/{{total}}",foundPrinters:"{{count}}개 프린터 발견",noPrintersFound:"프린터를 찾을 수 없습니다",noPrintersFoundSubnet:"지정된 서브넷에서 프린터를 찾을 수 없습니다.",noPrintersFoundNetwork:"네트워크에서 프린터를 찾을 수 없습니다.",allConfigured:"검색된 모든 프린터가 이미 설정되어 있습니다.",alreadyAdded:"이미 추가됨",select:"선택",manualEntry:"수동 입력",addFromCloud:"클라우드에서 추가",subnetToScan:"스캔할 서브넷",dockerNote:"Docker가 감지되었습니다. CIDR 표기법으로 프린터의 서브넷을 입력하세요. docker-compose.yml에 network_mode: host가 필요합니다.",scanSubnet:"서브넷에서 프린터 스캔",discoverNetwork:"네트워크에서 프린터 검색",scanningSubnet:"Bambu 프린터를 위해 서브넷 스캔 중...",scanningNetwork:"네트워크 스캔 중...",serialRequired:"일련번호 필수",unknown:"알 수 없음",failedToStart:"검색 시작 실패",customSubnetOption:"사용자 지정 서브넷...",customSubnetLabel:"사용자 지정 서브넷 (CIDR)",customSubnetNote:"프린터가 이 서버와 다른 네트워크에 있는 경우 사용자 지정 서브넷을 사용하세요. FTP (990) 및 MQTT (8883) 포트가 라우팅 경계를 통해 접근 가능해야 합니다."},drying:{start:"건조 시작",stop:"건조 정지",temperature:"온도",duration:"시간",hours:"시간",timeRemaining:"{{time}} 남음",active:"건조 중",notSupported:"건조 지원 안 됨",powerRequired:"건조를 활성화하려면 AMS 전원 어댑터를 연결하세요",startingDrying:"건조 시작 중...",stoppingDrying:"건조 정지 중...",rotateTray:"건조 중 스풀 회전"},filaments:"필라멘트",openCameraOverlay:"카메라 오버레이 열기",openCameraWindow:"새 창에서 카메라 열기",firmwareUpdateAvailable:"펌웨어 업데이트 가능: {{current}} → {{latest}}",firmwareUpToDate:"펌웨어 {{version}} — 최신 상태",firmwareUpdateButton:"업데이트",plateDetection:{noPermission:"프린터를 업데이트할 권한이 없습니다",enabledClick:"플레이트 확인 활성화됨 - 클릭하여 비활성화",disabledClick:"플레이트 확인 비활성화됨 - 클릭하여 활성화",manageCalibration:"플레이트 감지 캘리브레이션 관리",calibrationRequired:"캘리브레이션 필요",calibrationInstructions:"빌드 플레이트가 <strong>완전히 비어 있는지</strong> 확인한 후 캘리브레이션을 클릭하세요.",calibrationDescription:"캘리브레이션은 빈 플레이트의 참조 이미지를 캡처합니다. 이후 확인 시 이 참조와 비교하여 객체를 감지합니다.",calibrationTip:"<strong>팁:</strong> 다른 플레이트에 대해 최대 5개의 캘리브레이션을 저장할 수 있습니다. 확인 시 시스템이 자동으로 가장 잘 맞는 것을 사용합니다.",plateEmpty:"플레이트가 비어 있는 것으로 보입니다",objectsDetected:"플레이트에 객체가 감지되었습니다",confidence:"신뢰도",difference:"차이",analysisPreview:"분석 미리보기:",analysisLegend:"초록 박스 = 감지 영역, 빨간 오버레이 = 캘리브레이션과의 차이",savedReferences:"저장된 참조 ({{count}}/{{max}})",deleteReference:"참조 삭제",labelPlaceholder:"라벨...",clickToEdit:"{{label}} - 클릭하여 편집",clickToAddLabel:"클릭하여 라벨 추가"},speed:{title:"인쇄 속도",silent:"조용함 (50%)",standard:"표준 (100%)",sport:"스포츠 (124%)",ludicrous:"루디크러스 (166%)"},airduct:{title:"에어덕트 모드",cooling:"냉각",heating:"가열"},noSdCard:"SD 없음",door:{open:"열림",closed:"닫힘"},fans:{partCooling:"파트 냉각 팬",auxiliary:"보조 팬",chamber:"챔버 팬"},clickToViewHmsErrors:"HMS 오류 보기 클릭",estimatedCompletion:"예상 완료 시간",plateNumber:"플레이트 {{number}}",slotOptions:"슬롯 옵션",amsPopup:{friendlyName:"AMS 이름",friendlyNamePlaceholder:"예: AMS 친숙한 이름",serialNumber:"일련번호",firmwareVersion:"펌웨어",save:"저장",clear:"지우기",noEditPermission:"AMS 유닛 이름을 변경할 권한이 없습니다"},firmwareModal:{title:"펌웨어 업데이트",titleUpToDate:"펌웨어 정보",currentVersion:"현재:",latestVersion:"최신:",releaseNotes:"릴리스 노트",checkingPrereqs:"전제 조건 확인 중...",sdCardReady:"SD 카드 준비됨. 아래를 클릭하여 펌웨어를 업로드하세요.",uploadedSuccess:"SD 카드에 펌웨어가 업로드되었습니다!",applyInstructions:"프린터에서 업데이트를 적용하려면:",step1:"프린터 터치스크린에서 <strong>설정</strong>으로 이동하세요",step2:"<strong>펌웨어</strong>로 이동하세요",step3:"<strong>SD 카드에서 업데이트</strong>를 선택하세요",step4:"업데이트에 10-20분이 소요됩니다",done:"완료",starting:"시작 중...",uploadFirmware:"펌웨어 업로드",uploadFailed:"업로드 시작 실패: {{error}}",uploadedToast:"펌웨어 업로드됨! 프린터 화면에서 업데이트를 시작하세요.",availableVersions:"사용 가능한 버전",usable:"사용 가능",unavailable:"사용 불가",installed:"설치됨",newerBadge:"최신",olderBadge:"이전",currentBadge:"현재"},accessCodePlaceholder:"현재 값을 유지하려면 비워두세요",roi:{title:"감지 영역 (ROI)",xStart:"X 시작",yStart:"Y 시작",width:"너비",height:"높이",instruction:"빌드 플레이트에 집중할 감지 영역을 조정하세요. 미리보기의 초록 박스가 현재 영역을 표시합니다."},developerModeWarning:"개발자 LAN 모드가 활성화되지 않음: {{names}}. 일부 기능이 작동하지 않을 수 있습니다.",howToEnable:"활성화 방법",incompatibleFile:"이 파일은 {{slicedFor}}용으로 슬라이싱되었지만, 이 프린터는 {{printerModel}}입니다",dropNotPrintable:".gcode 및 .gcode.3mf 파일만 인쇄할 수 있습니다",dropToPrint:"놓아서 인쇄",cannotPrint:"프린터 사용 중",addPreflight:{checking:"연결 확인 중...",warning:"일부 연결 확인이 실패했습니다. 이 프린터가 오프라인으로 표시될 수 있습니다. 아래 항목을 검토하고 수정하거나 그냥 저장하세요.",back:"뒤로",saveAnyway:"그냥 저장"}},archives:{title:"인쇄 아카이브",searchPlaceholder:"아카이브 검색...",filterByPrinter:"프린터별 필터",filterByStatus:"상태별 필터",sortBy:"정렬 기준",sortNewest:"최신순",sortOldest:"오래된순",sortName:"이름",sortDuration:"시간",sortLargest:"큰 것 먼저",sortSmallest:"작은 것 먼저",sortSize:"크기",noArchives:"아카이브를 찾을 수 없습니다",noArchivesSearch:"검색 조건에 맞는 아카이브가 없습니다",originalPrintNotVisible:"원본 인쇄가 보이지 않음 - 필터를 지워보세요",noArchivesYet:"아직 아카이브가 없습니다",prints:"인쇄",pagination:{showing:"표시 중",to:"~",of:"/",show:"표시",page:"페이지",all:"전체"},loadingArchives:"아카이브 로딩 중...",releaseToUpload:"놓아서 업로드",showAll:"모두 보기",showFavoritesOnly:"즐겨찾기만 보기",gridView:"그리드 보기",listView:"목록 보기",calendarView:"달력 보기",logView:"인쇄 로그",manageTags:"태그 관리",showFailedPrints:"실패한 인쇄 표시",hideFailedPrints:"실패한 인쇄 숨기기",hideDuplicates:"중복 숨기기",viewOriginalPrint:"원본 인쇄 보기 클릭 (#{{id}})",printTime:"인쇄 시간",filamentUsed:"사용된 필라멘트",cost:"비용",reprint:"재인쇄",preview:"미리보기",deleteArchive:"아카이브 삭제",deleteConfirm:"이 아카이브를 삭제하시겠습니까?",favorite:"즐겨찾기",unfavorite:"즐겨찾기에서 제거",viewDetails:"상세 보기",status:{completed:"완료",failed:"실패",stopped:"정지됨"},toast:{source3mfAttached:"소스 3MF 첨부됨: {{filename}}",failedUploadSource3mf:"소스 3MF 업로드 실패",source3mfRemoved:"소스 3MF 제거됨",failedRemoveSource3mf:"소스 3MF 제거 실패",f3dAttached:"F3D 첨부됨: {{filename}}",failedUploadF3d:"F3D 업로드 실패",f3dRemoved:"F3D 제거됨",failedRemoveF3d:"F3D 제거 실패",timelapseAttached:"타임랩스 첨부됨: {{filename}}",timelapseAlreadyAttached:"타임랩스가 이미 첨부됨",noMatchingTimelapse:"일치하는 타임랩스를 찾을 수 없습니다",failedScanTimelapse:"타임랩스 스캔 실패",failedAttachTimelapse:"타임랩스 첨부 실패",timelapseRemoved:"타임랩스 제거됨",failedRemoveTimelapse:"타임랩스 제거 실패",timelapseUploaded:"타임랩스 업로드됨: {{filename}}",failedUploadTimelapse:"타임랩스 업로드 실패",archiveDeleted:"아카이브가 삭제되었습니다",failedDeleteArchive:"아카이브 삭제 실패",addedToFavorites:"즐겨찾기에 추가됨",removedFromFavorites:"즐겨찾기에서 제거됨",projectUpdated:"프로젝트가 업데이트되었습니다",failedUpdateProject:"프로젝트 업데이트 실패",linkCopied:"링크가 클립보드에 복사되었습니다",failedCopyLink:"링크 복사 실패",photoDeleted:"사진이 삭제되었습니다",failedDeletePhoto:"사진 삭제 실패",failedDeleteArchives:"아카이브 삭제 실패",failedUpdateFavorites:"즐겨찾기 업데이트 실패",exportDownloaded:"내보내기 다운로드됨",exportFailed:"내보내기 실패"},menu:{print:"인쇄",schedule:"예약",openInBambuStudio:"슬라이서에서 열기",slice:"슬라이스",externalLink:"외부 링크",viewOnMakerWorld:"MakerWorld에서 보기",preview3d:"3D 미리보기",viewTimelapse:"타임랩스 보기",scanForTimelapse:"타임랩스 검색",uploadTimelapse:"타임랩스 업로드",removeTimelapse:"타임랩스 제거",downloadSource3mf:"소스 3MF 다운로드",uploadSource3mf:"소스 3MF 업로드",replaceSource3mf:"소스 3MF 교체",removeSource3mf:"소스 3MF 제거",uploadF3d:"F3D 업로드",replaceF3d:"F3D 교체",downloadF3d:"F3D 다운로드",removeF3d:"F3D 제거",download:"다운로드",copyDownloadLink:"다운로드 링크 복사",qrCode:"QR 코드",viewPhotos:"사진 보기",viewPhotosCount:"사진 보기 ({{count}})",projectPage:"프로젝트 페이지",addToFavorites:"즐겨찾기에 추가",removeFromFavorites:"즐겨찾기에서 제거",edit:"편집",goToProject:"프로젝트로 이동: {{name}}",addToProject:"프로젝트에 추가",removeFromProject:"프로젝트에서 제거",loading:"로딩 중...",noProjectsAvailable:"사용 가능한 프로젝트 없음",searchProjects:"프로젝트 검색…",select:"선택",deselect:"선택 해제",delete:"삭제",printLog:"인쇄 기록"},permission:{noReprint:"이 아카이브를 재인쇄할 권한이 없습니다",noAddToQueue:"대기열에 추가할 권한이 없습니다",noUpdateArchives:"아카이브를 업데이트할 권한이 없습니다",noUploadFiles:"파일을 업로드할 권한이 없습니다",noDownload:"아카이브를 다운로드할 권한이 없습니다",noCopyLink:"다운로드 링크를 복사할 권한이 없습니다",noDelete:"이 아카이브를 삭제할 권한이 없습니다",noCreate:"아카이브를 만들 권한이 없습니다"},platePicker:{title:"미리 볼 플레이트 선택",hint:"이 아카이브에는 여러 플레이트가 있습니다. G코드 뷰어에서 열 플레이트를 선택하세요.",plateLabel:"플레이트 {{index}}",objectCount:"{{count}}개 객체",objectCount_plural:"{{count}}개 객체",noGcode:"이 아카이브에는 미리 볼 슬라이싱된 G코드가 없습니다. Bambu Studio에서 먼저 슬라이싱하세요."},card:{previousPlate:"이전 플레이트",nextPlate:"다음 플레이트",plateNumber:"플레이트 {{index}}",moreOptions:"더 많은 옵션은 우클릭",addToFavorites:"즐겨찾기에 추가",removeFromFavorites:"즐겨찾기에서 제거",cancelled:"취소됨",failed:"실패",duplicate:"중복",duplicateTitle:"이 모델은 이전에 인쇄된 적이 있습니다",openSource3mf:"Bambu Studio에서 소스 3MF 열기 (더 많은 옵션은 우클릭)",downloadF3d:"Fusion 360 디자인 파일 다운로드",viewTimelapse:"타임랩스 보기",viewPhoto:"사진 1장 보기",viewPhotos:"사진 {{count}}장 보기",openFolder:"폴더 열기: {{name}}",slicedFile:"슬라이싱된 파일 - 인쇄 준비 완료",sourceFile:"소스 파일만 - AMS 매핑 없음",gcode:"GCODE",source:"소스",project:"프로젝트: {{name}}",estimated:"예상: {{time}}",actual:"실제: {{time}}",accuracy:"정확도: {{percent}}%",filament:"{{weight}}g",layer:"{{count}}층",layers:"{{count}}층",object:"{{count}}개 객체",objects:"{{count}}개 객체",slicedFor:"{{model}}용으로 슬라이싱됨",uploadedBy:"업로드한 사용자",noPermissionReprint:"재인쇄 권한이 없습니다",noFileForReprint:"3MF 파일 없음 — 인쇄 기록 시 프린터에서 파일을 다운로드할 수 없었습니다",noPermissionEdit:"아카이브를 편집할 권한이 없습니다",noPermissionDelete:"아카이브를 삭제할 권한이 없습니다",reprint:"재인쇄",schedulePrint:"인쇄 예약",schedule:"예약",openInBambuStudio:"슬라이서에서 열기",openInBambuStudioToSlice:"슬라이스하려면 슬라이서에서 열기",slice:"슬라이스",externalLink:"외부 링크",makerWorld:"MakerWorld: {{designer}}",viewProject:"프로젝트 보기",noExternalLink:"외부 링크 없음",preview3d:"3D 미리보기",download:"다운로드",edit:"편집",delete:"삭제",runsBadge:"{{count}}회 인쇄",runsBadgeTitle:"총 {{count}}회 인쇄 — {{successful}}회 성공, {{failed}}회 실패. 전체 인쇄 기록을 보려면 클릭하세요."},modal:{deleteArchive:"아카이브 삭제",deleteConfirm:'"{{name}}"을(를) 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.',deleteButton:"삭제",removeSource3mf:"소스 3MF 제거",removeSource3mfConfirm:'"{{name}}"에서 소스 3MF 파일을 제거하시겠습니까? 원본 슬라이서 프로젝트 파일이 삭제됩니다.',removeButton:"제거",removeF3d:"F3D 제거",removeF3dConfirm:'"{{name}}"에서 Fusion 360 디자인 파일을 제거하시겠습니까?',removeTimelapse:"타임랩스 제거",removeTimelapseConfirm:'"{{name}}"에서 타임랩스 영상을 제거하시겠습니까?',timelapse:"{{name}} - 타임랩스",selectTimelapse:"타임랩스 선택",selectTimelapseDesc:"자동 일치 항목 없음. 이 인쇄의 타임랩스를 선택하세요:",deleteArchives:"아카이브 삭제",deleteArchivesConfirm:"{{count}}개 아카이브를 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.",deleteCount:"{{count}}개 삭제",deletePurgeStats:"빠른 통계에서도 이 인쇄 항목 제거 (필라멘트, 시간, 비용, 에너지)"},page:{title:"아카이브",printsCount:"{{total}}개 중 {{filtered}}개 인쇄",dropFilesHere:".3mf 파일을 여기에 놓으세요",releaseToUpload:"놓아서 업로드",only3mfSupported:".3mf 파일만 지원됩니다",close:"닫기",selected:"{{count}}개 선택됨",selectAll:"전체 선택",tags:"태그",project:"프로젝트",favorite:"즐겨찾기",delete:"삭제",toggledFavorites:"{{count}}개 아카이브의 즐겨찾기가 변경됨",failedUpdateFavorites:"즐겨찾기 업데이트 실패",archivesDeleted:"{{count}}개 아카이브가 삭제됨",failedDeleteArchives:"아카이브 삭제 실패",photoDeleted:"사진이 삭제됨",failedDeletePhoto:"사진 삭제 실패"},list:{name:"이름",printer:"프린터",date:"날짜",size:"크기",actions:"작업",hasTimelapse:"타임랩스 있음"},log:{date:"날짜",printName:"인쇄 이름",printer:"프린터",user:"사용자",status:"상태",duration:"소요 시간",filament:"필라멘트",allPrinters:"모든 프린터",allUsers:"모든 사용자",allStatuses:"모든 상태",cancelled:"취소됨",skipped:"건너뜀",dateFrom:"시작",dateTo:"종료",noEntries:"인쇄 로그 항목이 없습니다",showing:"{{total}}개 중 {{count}}개 표시",rowsPerPage:"행",page:"페이지",prev:"이전",next:"다음",clearLog:"로그 지우기",clearLogTitle:"인쇄 로그 지우기",clearLogConfirm:"모든 인쇄 로그 항목이 영구적으로 삭제됩니다. 아카이브와 대기열 항목은 영향받지 않습니다. 이 작업은 취소할 수 없습니다. 계속하시겠습니까?",clearLogButton:"모두 지우기",cleared:"{{count}}개 로그 항목이 지워졌습니다",clearFailed:"인쇄 로그 지우기 실패"},runLog:{title:"인쇄 기록",modalTitle:"인쇄 기록 — {{name}}",modalTitleFallback:"이 아카이브",empty:"이 아카이브에 대해 기록된 인쇄 이벤트가 없습니다.",col:{date:"날짜",status:"상태",duration:"소요 시간",filament:"필라멘트",cost:"비용"},status:{completed:"완료",failed:"실패",cancelled:"취소됨",stopped:"중지됨",skipped:"건너뜀",printing:"인쇄 중"}}},queue:{title:"인쇄 대기열",subtitle:"인쇄 작업을 예약하고 관리하세요",addToQueue:"대기열에 추가",print:"인쇄",reprint:"재인쇄",schedulePrint:"인쇄 예약",editQueueItem:"대기열 항목 편집",printToPrinters:"{{count}}개 프린터에 인쇄",queueToPrinters:"{{count}}개 프린터에 대기",queueSelectedPlates:"{{count}}개 플레이트 대기",selectAllPlates:"{{count}}개 플레이트 전체 선택",deselectAll:"전체 해제",printQueued:"인쇄가 대기열에 추가됨",itemsQueued:"{{count}}개 항목이 대기열에 추가됨",sending:"전송 중...",sendingProgress:"{{current}}/{{total}} 전송 중...",adding:"추가 중...",addingProgress:"{{current}}/{{total}} 추가 중...",savingProgress:"{{current}}/{{total}} 저장 중...",clearQueue:"대기열 지우기",clearHistory:"기록 지우기",emptyQueue:"대기열이 비어 있습니다",position:"위치",scheduledTime:"예약 시간",moveUp:"위로 이동",moveDown:"아래로 이동",startNow:"지금 시작",printingInProgress:"인쇄 중...",viewArchive:"아카이브 보기",viewInFileManager:"파일 관리자에서 보기",itemCount:"{{count}}개 항목",itemCount_plural:"{{count}}개 항목",dragToReorder:"드래그하여 순서 변경 (즉시만)",reorderHint:"위치는 즉시 항목에만 영향을 줍니다. 예약된 항목은 설정된 시간에 실행됩니다.",sjf:{label:"SJF",tooltip:"최단 작업 우선 — 스케줄러가 짧은 인쇄를 우선합니다"},addedBy:"{{name}}님이 추가함",nextInQueue:"다음 대기",clearPlateSuccess:"플레이트 비워짐 — 다음 인쇄 준비 완료",plateNumber:"플레이트 {{index}}",quantity:"수량",quantityHint:"{{count}}개 대기열 항목 생성",activeBatches:"활성 배치",batchProgress:"{{total}}개 중 {{completed}}개 완료",cancelBatch:"나머지 취소",batchCancelled:"남은 배치 항목이 취소되었습니다",cancelBatchConfirmTitle:"배치 취소",cancelBatchConfirmMessage:"이 배치의 남은 대기 항목을 모두 취소하시겠습니까?",batch:"배치",sections:{currentlyPrinting:"현재 인쇄 중",queued:"대기 중",history:"기록"},status:{pending:"대기 중",waiting:"기다리는 중",printing:"인쇄 중",paused:"일시정지",completed:"완료",failed:"실패",skipped:"건너뜀",cancelled:"취소됨"},summary:{printing:"인쇄 중",queued:"대기 중",totalTime:"총 대기열 시간",totalWeight:"총 대기열 무게",history:"기록"},filter:{allPrinters:"모든 프린터",unassigned:"미할당",allStatus:"모든 상태",allLocations:"모든 위치",any:"전체"},sort:{byPosition:"위치별 정렬",byName:"이름별 정렬",byPrinter:"프린터별 정렬",bySchedule:"예약별 정렬",byDate:"날짜별 정렬",ascendingOldest:"오름차순 (오래된 것 먼저)",descendingNewest:"내림차순 (최신 것 먼저)"},badges:{staged:"준비됨",requiresPrevious:"이전 성공 필요",autoPowerOff:"자동 전원 끄기",gcodeInjection:"G코드"},empty:{title:"예약된 인쇄 없음",description:'아카이브 페이지의 컨텍스트 메뉴에서 "예약" 옵션을 사용하거나 파일을 드래그 앤 드롭하여 시작하세요.'},time:{asap:"즉시",overdue:"기한 초과",now:"지금",lessThanMinute:"1분 이내",inMinutes:"{{count}}분 후",inHours:"{{count}}시간 후"},actions:{stopPrint:"인쇄 정지",startPrint:"인쇄 시작",requeue:"재대기"},bulkEdit:{title:"{{count}}개 항목 편집",title_plural:"{{count}}개 항목 편집",description:"변경된 설정만 선택된 항목에 적용됩니다.",printer:"프린터",noChange:"— 변경 없음 —",queueOptions:"대기열 옵션",staged:"준비됨 (수동 시작)",autoPowerOff:"인쇄 후 자동 전원 끄기",requirePrevious:"이전 성공 필요",printOptions:"인쇄 옵션",bedLevelling:"베드 레벨링",flowCalibration:"유량 캘리브레이션",vibrationCalibration:"진동 캘리브레이션",layerInspection:"첫 번째 층 검사",timelapse:"타임랩스",useAms:"AMS 사용",applyChanges:"변경사항 적용",selectAll:"전체 선택",deselectAll:"전체 해제",selected:"{{count}}개 선택됨",editSelected:"선택 항목 편집",cancelSelected:"선택 항목 취소"},confirm:{cancelTitle:"예약된 인쇄 취소",cancelMessage:'"{{name}}"을(를) 취소하시겠습니까?',stopTitle:"인쇄 정지",stopMessage:'"{{name}}"의 현재 인쇄를 정지하시겠습니까? 프린터의 인쇄 작업이 취소됩니다.',removeTitle:"기록에서 제거",removeMessage:'대기열 기록에서 "{{name}}"을(를) 제거하시겠습니까?',clearHistoryTitle:"기록 지우기",clearHistoryMessage:"기록에서 {{count}}개 항목을 모두 제거하시겠습니까?",cancelButton:"인쇄 취소",stopButton:"인쇄 정지",thisPrint:"이 인쇄",thisItem:"이 항목"},toast:{cancelled:"대기열 항목이 취소되었습니다",cancelFailed:"항목 취소 실패",removed:"대기열 항목이 제거되었습니다",removeFailed:"항목 제거 실패",stopped:"인쇄가 정지되었습니다",stopFailed:"인쇄 정지 실패",released:"인쇄가 대기열에 릴리스되었습니다",startFailed:"인쇄 시작 실패",reorderFailed:"대기열 순서 변경 실패",historyCleared:"{{count}}개 기록 항목이 지워졌습니다",clearHistoryFailed:"기록 지우기 실패",updateFailed:"항목 업데이트 실패",bulkCancelled:"{{count}}개 항목이 취소되었습니다",bulkCancelFailed:"항목 취소 실패"},timeline:{listView:"목록",timelineView:"타임라인",unassigned:"미할당",noData:"이 날에 예약된 인쇄 없음",allDoneBy:"모든 인쇄 예상 완료 시간: {{time}}",staged:"준비됨",filterAll:"모두 표시",filterPrinting:"인쇄 중",filterQueued:"대기 중",time:{anyMoment:"잠시 후",minutesLeft:"{{minutes}}분 남음",hoursLeft:"{{hours}}시간 남음",hoursMinutesLeft:"{{hours}}시간 {{minutes}}분 남음"},day:{previous:"이전 날",next:"다음 날",today:"오늘"}},permissions:{noStopPrint:"인쇄를 정지할 권한이 없습니다",noStartPrint:"인쇄를 시작할 권한이 없습니다",noEdit:"이 대기열 항목을 편집할 권한이 없습니다",noCancel:"이 대기열 항목을 취소할 권한이 없습니다",noRequeue:"항목을 재대기할 권한이 없습니다",noRemove:"이 대기열 항목을 제거할 권한이 없습니다",noClearHistory:"모든 기록을 지울 권한이 없습니다",noEditItems:"대기열 항목을 편집할 권한이 없습니다",noCancelItems:"대기열 항목을 취소할 권한이 없습니다"},filamentShort:{rowBadge:"할당된 스풀의 필라멘트가 부족합니다",rowTooltip:"디스패치 스케줄러가 이 항목을 표시했습니다. 재생 버튼을 클릭하여 슬롯별 부족량을 확인하고 인쇄 여부를 결정하세요.",confirmTitle:"필라멘트 부족",confirmIntro:"할당된 스풀이 하나 이상의 슬롯을 채울 수 없습니다. 그래도 인쇄하시겠습니까?",lineItem:"슬롯 {{slot}}: {{required}}g 필요, {{remaining}}g 남음",unknown:"알 수 없음",printAnyway:"그냥 인쇄"}},backgroundDispatch:{unknownFile:"알 수 없는 파일",unknownPrinter:"알 수 없는 프린터",startingPrints:"인쇄 시작 중",progressSummary:"{{complete}}/{{total}} 완료 • 전송됨: {{dispatched}} • 처리 중: {{processing}}",expandDetails:"전송 상세 펼치기",collapseDetails:"전송 상세 접기",dismissToast:"전송 알림 닫기",cancelDispatchJob:"전송 작업 취소",cancel:"취소",cancelling:"취소 중…",awaitingPrinter:"프린터 대기 중…",status:{dispatched:"전송됨",processing:"처리 중",completed:"완료",failed:"실패",cancelled:"취소됨"},toast:{cancellingUpload:"업로드 취소 중...",cancelled:"전송이 취소되었습니다",cancelFailed:"전송 취소 실패",completeWithFailures:"백그라운드 전송 완료: {{completed}}개 성공, {{failed}}개 실패",completeSuccess:"백그라운드 전송 완료: {{completed}}개 성공",printStartedRemaining:"{{completed}}개 인쇄 시작, {{remaining}}개 더 전송 중..."}},stats:{title:"대시보드",subtitle:"위젯을 드래그하여 정렬하세요. 눈 아이콘을 클릭하여 숨기세요.",overview:"개요",totalPrints:"총 인쇄 수",successRate:"성공률",totalPrintTime:"총 인쇄 시간",printTime:"인쇄 시간",totalFilament:"총 사용 필라멘트",filamentUsed:"사용된 필라멘트",filamentCost:"필라멘트 비용",totalCost:"총 비용",energyUsed:"사용된 에너지",energyCost:"에너지 비용",energyWarmingUpTooltip:"에너지 추적이 시간별 스냅샷을 수집 중입니다. 날짜 범위 합계는 선택한 범위 이전에 하나 이상의 스냅샷이 존재하면 정확해집니다. 초기 값이 적게 집계될 수 있습니다.",averagePrintTime:"평균 인쇄 시간",printsPerDay:"일일 인쇄 수",byPrinter:"프린터별",printsByPrinter:"프린터별 인쇄",byMaterial:"재료별",byMonth:"월별",last7Days:"최근 7일",last30Days:"최근 30일",last90Days:"최근 90일",allTime:"전체 기간",quickStats:"빠른 통계",printActivity:"인쇄 활동",filamentTypes:"필라멘트 종류",filamentTrends:"필라멘트 추세",failureAnalysis:"실패 분석",timeAccuracy:"시간 정확도",successful:"성공:",failed:"실패:",cancelled:"취소됨:",perfectEstimate:"100% = 완벽한 예상",noTimeAccuracyData:"아직 시간 정확도 데이터 없음",noFilamentData:"필라멘트 데이터 없음",noPrinterData:"프린터 데이터 없음",noPrintData:"인쇄 데이터 없음",noPrintDataLast30Days:"최근 30일 인쇄 데이터 없음",failureReasons:"실패 원인",topFailureReasons:"주요 실패 원인",failedPrintsCount:"{{total}}개 인쇄 중 {{failed}}개 실패",lastWeekRate:"지난 주: {{rate}}%",resetLayout:"레이아웃 초기화",recalculateCosts:"비용 재계산",recalculateCostsHint:"현재 필라멘트 가격으로 모든 아카이브 비용 재계산",exportStats:"통계 내보내기",exportAsCsv:"CSV로 내보내기",exportAsExcel:"Excel로 내보내기",hiddenCount:"{{count}}개 숨겨짐",exportDownloaded:"내보내기 다운로드됨",exportFailed:"내보내기 실패",layoutReset:"레이아웃이 초기화되었습니다",recalculatedCosts:"{{count}}개 아카이브의 비용이 재계산되었습니다",recalculateFailed:"비용 재계산 실패",loadingStats:"통계 로딩 중...",noPermissionResetLayout:"레이아웃을 초기화할 권한이 없습니다",noPermissionRecalculate:"비용을 재계산할 권한이 없습니다",noPrintDataInRange:"선택한 범위에 인쇄 데이터 없음",periodFilament:"기간 필라멘트",periodCost:"기간 비용",avgPerPrint:"인쇄당 평균",usageOverTime:"시간별 사용량",filamentByWeight:"무게",printDuration:"인쇄 시간",printerUtilization:"프린터 사용률",filamentSuccess:"재료별 성공률",printHabits:"인쇄 습관",printTimeOfDay:"시간대별 인쇄",colorDistribution:"색상 분포",noColorData:"색상 데이터 없음",records:"기록",longestPrint:"최장 인쇄",heaviestPrint:"가장 무거운 인쇄",mostExpensivePrint:"가장 비싼 인쇄",busiestDay:"가장 바쁜 날",successStreak:"연속 성공",streakPrint:"연속 인쇄",streakPrints:"{{count}}번 연속 인쇄",printerStats:"프린터 통계",hours:"시간",avgPrints:"평균 인쇄",noArchiveData:"인쇄 데이터 없음",filamentByTime:"시간",avgWeight:"평균 무게",avgTime:"평균 시간",filamentByPrints:"인쇄",timeframe:{today:"오늘","this-week":"이번 주","this-month":"이번 달","last-7":"최근 7일","last-30":"최근 30일","last-90":"최근 90일","this-year":"올해","all-time":"전체 기간",custom:"사용자 지정 범위",from:"시작",to:"종료"},allUsers:"모든 사용자",noUser:"사용자 없음 (시스템)",filterByUser:"사용자별 필터"},maintenance:{title:"유지보수",overview:"개요",allOk:"모든 유지보수 최신 상태",dueCount:"{{count}}개 항목 예정",dueCount_plural:"{{count}}개 항목 예정",warningCount:"{{count}}개 경고",warningCount_plural:"{{count}}개 경고",totalPrintTime:"총 인쇄 시간",nextMaintenance:"다음 유지보수",nothingDue:"예정 없음",tasks:"작업",lastPerformed:"마지막 수행",interval:"간격",hoursRemaining:"{{hours}}시간 남음",hoursOverdue:"{{hours}}시간 초과",markDone:"완료로 표시",performMaintenance:"유지보수 수행",history:"기록",noHistory:"유지보수 기록 없음",editPrintHours:"인쇄 시간 편집",currentHours:"현재 시간",statusTab:"상태",settingsTab:"설정",overdueCount:"{{count}}개 초과",dueSoonCount:"{{count}}개 곧 예정",dueSoon:"곧 예정",allGood:"모두 정상",overdueBy:"{{duration}} 초과",dueIn:"{{duration}} 후 예정",timeLeft:"{{duration}} 남음",day:"1일",days:"{{count}}일",week:"1주",weeks:"{{count}}주",month:"1개월",months:"{{count}}개월",year:"1년",maintenanceTypes:"유지보수 유형",maintenanceTypesDescription:"시스템 유형 및 사용자 지정 유지보수 작업",addCustomType:"사용자 지정 유형 추가",restoreDefaults:"기본 작업 복원",intervalType:"간격 유형",intervalValue:"간격 ({{type}})",icon:"아이콘",documentationLink:"문서 링크 (선택사항)",assignToPrinters:"프린터에 할당",selectAtLeastOnePrinter:"최소 한 개의 프린터를 선택하세요",addType:"유형 추가",custom:"사용자 지정",printHours:"인쇄 시간",calendarDays:"달력 일수",exampleName:"예: HEPA 필터 교체",viewDocumentation:"문서 보기",timeBasedInterval:"시간 기반 간격",intervalOverrides:"간격 재정의",intervalOverridesDescription:"특정 프린터의 간격 사용자 지정",assignedToPrinters:"할당된 프린터:",noPrintersAssigned:"할당된 프린터 없음",addPrinterShort:"추가:",printersAssignedClick:"{{count}}개 프린터 할당됨 - 클릭하여 관리",removeFromPrinter:"이 프린터에서 제거",types:{lubricateCarbonRods:"카본 로드 윤활",lubricateRails:"리니어 레일 윤활",cleanNozzle:"노즐/핫엔드 청소",checkBelts:"벨트 장력 확인",cleanBuildPlate:"빌드 플레이트 청소",checkExtruder:"압출기 기어 확인",checkCooling:"냉각 팬 확인",generalInspection:"일반 점검",cleanCarbonRods:"카본 로드 청소",lubricateSteelRods:"스틸 로드 윤활",cleanSteelRods:"스틸 로드 청소",cleanLinearRails:"리니어 레일 청소",checkPtfeTube:"PTFE 튜브 확인",replaceHepaFilter:"HEPA 필터 교체",replaceCarbonFilter:"활성탄 필터 교체",lubricateLeftNozzleRail:"좌측 노즐 레일 윤활"},maintenanceComplete:"유지보수가 완료로 표시되었습니다",typeUpdated:"유지보수 유형이 업데이트되었습니다",typeDeleted:"유지보수 유형이 삭제되었습니다",defaultsRestored:"{{count}}개 기본 작업이 복원되었습니다",printHoursUpdated:"인쇄 시간이 업데이트되었습니다",printerAssigned:"프린터가 할당되었습니다",printerRemoved:"프린터가 제거되었습니다",deleteTypeConfirm:'"{{name}}"을(를) 삭제하시겠습니까?',deleteSystemTypeTitle:"기본 유지보수 작업을 삭제하시겠습니까?",deleteSystemTypeMessage:'기본 유지보수 작업 "{{name}}"을(를) 삭제하시겠습니까?',noPermissionUpdate:"유지보수 항목을 업데이트할 권한이 없습니다",noPermissionPerform:"유지보수를 수행할 권한이 없습니다",noPermissionEditTypes:"유지보수 유형을 편집할 권한이 없습니다",noPermissionDeleteTypes:"유지보수 유형을 삭제할 권한이 없습니다",noPermissionEditHours:"인쇄 시간을 편집할 권한이 없습니다",noPermissionRemovePrinter:"프린터 할당을 제거할 권한이 없습니다",noPermissionAssignPrinter:"프린터를 할당할 권한이 없습니다",noPermissionEditIntervals:"간격을 편집할 권한이 없습니다",configureSettings:"유지보수 유형 및 간격 설정"},settings:{title:"설정",general:"일반",tabs:{general:"일반",smartPlugs:"스마트 플러그",notifications:"알림",queue:"워크플로우",filament:"필라멘트",network:"네트워크",apiKeys:"API 키",virtualPrinter:"가상 프린터",spoolbuddy:"SpoolBuddy",failureDetection:"실패 감지",users:"인증",backup:"백업",emailAuth:"이메일 인증",ldap:"LDAP",twoFa:"이중 인증",oidc:"SSO / OIDC",security:"보안"},spoolbuddy:{infoTitle:"SpoolBuddy 기기",infoBody:"SpoolBuddy 키오스크는 하트비트를 통해 자동으로 등록됩니다. 더 이상 사용하지 않거나 데몬 충돌로 인한 중복이 있는 경우 여기서 기기를 등록 해제하세요.",duplicatesTitle:"{{count}}개 기기 등록됨",duplicatesBody:"첫 번째로 등록된 기기만 키오스크 UI에서 사용됩니다. 충돌로 인한 오래된 중복이 있으면 등록 해제하세요 — 온라인 기기는 다음 하트비트에서 자동으로 재등록됩니다.",empty:"아직 등록된 SpoolBuddy 기기가 없습니다.",online:"온라인",offline:"오프라인",unregister:"등록 해제",unregisterSuccess:"기기 등록 해제됨",unregisterError:"기기 등록 해제 실패",confirmTitle:"SpoolBuddy 기기를 등록 해제하시겠습니까?",confirmBody:'데이터베이스에서 "{{hostname}}" ({{deviceId}})를 제거합니다. 기기가 온라인이면 다음 하트비트에서 자동으로 재등록됩니다.',ipAddress:"IP 주소",firmware:"펌웨어",lastSeen:"마지막 확인",daemonUptime:"데몬 가동 시간",systemUptime:"시스템 가동 시간",never:"없음",nfc:"NFC",scale:"저울",cpuTemp:"CPU 온도",memory:"메모리",disk:"디스크",update:"업데이트",updateConfirmTitle:"Spoolbuddy 데몬을 업데이트하시겠습니까?",updateConfirmBody:'"{{hostname}}"에서 소프트웨어 업데이트를 실행하시겠습니까? 업데이트가 적용되면 데몬이 재시작됩니다.',restartBrowser:"브라우저 재시작",restartBrowserConfirmTitle:"키오스크 브라우저를 재시작하시겠습니까?",restartBrowserConfirmBody:'"{{hostname}}"의 키오스크 브라우저를 재시작하시겠습니까? 화면이 잠시 꺼집니다.',restartDaemon:"데몬 재시작",restartDaemonConfirmTitle:"Spoolbuddy 데몬을 재시작하시겠습니까?",restartDaemonConfirmBody:'"{{hostname}}"의 Spoolbuddy 데몬을 재시작하시겠습니까? 기기가 몇 초 동안 오프라인 상태가 됩니다.',reboot:"재부팅",rebootConfirmTitle:"기기를 재부팅하시겠습니까?",rebootConfirmBody:'"{{hostname}}"을(를) 재부팅하시겠습니까? 기기가 약 1분 동안 오프라인 상태가 됩니다.',shutdown:"종료",shutdownConfirmTitle:"기기를 종료하시겠습니까?",shutdownConfirmBody:'"{{hostname}}"을(를) 종료하시겠습니까? 다시 켜려면 물리적 접근이 필요합니다.',commandConfirm:"확인",commandQueued:"명령이 대기열에 추가됨",commandError:"명령 전송 실패",cpuLoad:"CPU 부하"},ldap:{title:"LDAP 인증",enabledDesc:"LDAP 인증이 활성화되어 있습니다",disabledDesc:"LDAP 인증이 비활성화되어 있습니다",disabledHint:"아래에서 LDAP 설정을 구성하고 저장한 후 활성화하세요.",enabled:"LDAP 인증 활성화됨",disabled:"LDAP 인증 비활성화됨",feature1:"사용자가 LDAP 자격 증명으로 로그인 가능",feature2:"로컬 관리자 계정이 대체 수단으로 유지됨",feature3:"LDAP 그룹이 로그인 시 Bambuddy 그룹에 매핑됨",serverConfig:"LDAP 서버 설정",serverUrl:"서버 URL",serverUrlHint:"SSL에는 ldaps://, StartTLS에는 ldap:// 사용",security:"보안",securityHint:"StartTLS는 일반 연결을 TLS로 업그레이드합니다. LDAPS는 처음부터 TLS를 사용합니다.",bindDn:"바인드 DN (서비스 계정)",bindPassword:"바인드 비밀번호",searchBase:"검색 기반 DN",userFilter:"사용자 검색 필터",userFilterHint:"{username}은 로그인 사용자명으로 대체됩니다. OpenLDAP의 경우 (uid={username})을 사용하세요.",autoProvision:"사용자 자동 프로비저닝",autoProvisionHint:"첫 LDAP 로그인 시 자동으로 Bambuddy 계정 생성",defaultGroup:"기본 그룹",defaultGroupNone:"— 없음 (대체 없음) —",defaultGroupHint:"LDAP 사용자가 인증되었지만 매핑된 LDAP 그룹에 없을 때 할당되는 대체 그룹. 비워두면 매핑되지 않은 사용자에게 권한이 없습니다.",groupMapping:"그룹 매핑 (JSON)",groupMappingHint:"LDAP 그룹 DN을 Bambuddy 그룹에 매핑합니다. 사용 가능한 그룹: ",testConnection:"연결 테스트",settingsSaved:"LDAP 설정이 저장되었습니다",errors:{serverRequired:"LDAP 서버 URL이 필요합니다",searchBaseRequired:"검색 기반 DN이 필요합니다",enableAuthFirst:"먼저 인증을 활성화하세요",configureLdapFirst:"먼저 LDAP 설정을 저장하세요"},advanced:"고급"},email:{smtpSettings:"SMTP 설정",smtpHost:"SMTP 서버",smtpPort:"SMTP 포트",security:"보안",authentication:"인증",username:"사용자명",password:"비밀번호",fromEmail:"발신 이메일",fromName:"발신자 이름",testConnection:"SMTP 연결 테스트",testRecipient:"테스트 수신자 이메일",sendTest:"테스트 이메일 전송",sending:"전송 중...",save:"설정 저장",saving:"저장 중...",advancedAuth:"고급 인증",advancedAuthEnabled:"고급 인증이 활성화되어 있습니다",advancedAuthEnabledDesc:"이메일 기반 사용자 관리 기능이 활성화되어 있습니다. 신규 사용자는 이메일로 자동 생성된 비밀번호를 받으며, 사용자는 비밀번호 찾기 기능으로 비밀번호를 재설정할 수 있습니다.",advancedAuthDisabled:"고급 인증이 비활성화되어 있습니다",advancedAuthDisabledDesc:"이메일 기반 사용자 관리 기능을 활성화하려면 고급 인증을 활성화하세요.",enable:"활성화",disable:"비활성화",feature1:"비밀번호가 자동 생성되어 신규 사용자에게 이메일로 전송됨",feature2:"사용자가 사용자명 또는 이메일로 로그인 가능",feature3:"비밀번호 찾기 기능 사용 가능",feature4:"관리자가 이메일로 사용자 비밀번호 재설정 가능",errors:{requiredFields:"모든 필수 항목을 입력하세요",usernameRequired:"인증이 활성화된 경우 사용자명이 필요합니다",enterTestEmail:"테스트 이메일 주소를 입력하세요",smtpServerAndEmail:"테스트 전에 SMTP 서버와 발신 이메일을 입력하세요",usernamePasswordRequired:"인증이 활성화된 경우 사용자명과 비밀번호가 필요합니다",configureSmtpFirst:"먼저 SMTP 설정을 구성하고 테스트하세요",enableAuthFirst:"이메일 기반 기능을 사용하려면 먼저 인증을 활성화하세요."},success:{settingsSaved:"SMTP 설정이 성공적으로 저장되었습니다"},securityOptions:{starttls:"STARTTLS (포트 587)",ssl:"SSL/TLS (포트 465)",none:"없음 (포트 25)"},authOptions:{enabled:"활성화됨",disabled:"비활성화됨"}},appearance:"모양",notifications:"알림",smartPlugs:"스마트 플러그",spoolman:"Spoolman",updates:"업데이트",language:"언어",languageDescription:"선호하는 언어를 선택하세요",theme:"테마",themeLight:"라이트",themeDark:"다크",themeSystem:"시스템",defaultView:"기본 보기",defaultViewDescription:"앱을 열 때 표시할 페이지",checkForUpdates:"업데이트 확인",autoUpdate:"자동 업데이트",currentVersion:"현재 버전",latestVersion:"최신 버전",upToDate:"최신 상태입니다",updateAvailable:"업데이트 가능",notificationLanguage:"알림 언어",notificationLanguageDescription:"푸시 알림 언어",bedCooledThreshold:"베드 냉각 임계값",bedCooledThresholdDescription:"인쇄 후 베드가 냉각된 것으로 간주되는 온도",userNotificationsEnabled:"사용자 알림",userNotificationsEnabledDescription:"사용자 알림 메뉴 및 인쇄 작업 이벤트에 대한 이메일 알림을 활성화합니다. 고급 인증이 필요합니다.",userNotificationsDisabledHint:"사용자 알림을 사용하려면 고급 인증을 활성화하세요.",notificationProviders:"알림 제공자",addProvider:"제공자 추가",editProvider:"제공자 편집",providerType:"제공자 유형",testNotification:"알림 테스트",testSuccess:"테스트 알림이 성공적으로 전송되었습니다",testFailed:"테스트 알림 전송 실패",quietHours:"방해 금지 시간",quietHoursDescription:"이 시간 동안 방해하지 않음",quietHoursStart:"시작",quietHoursEnd:"종료",events:{title:"알림 이벤트",printStart:"인쇄 시작됨",printComplete:"인쇄 완료됨",printFailed:"인쇄 실패",printStopped:"인쇄 정지됨",printProgress:"진행 마일스톤",printProgressDescription:"25%, 50%, 75%에 알림",printerOffline:"프린터 오프라인",printerError:"프린터 오류",filamentLow:"필라멘트 부족",maintenanceDue:"유지보수 예정",maintenanceDueDescription:"유지보수가 필요할 때 알림"},smartPlug:{title:"스마트 플러그",add:"스마트 플러그 추가",edit:"스마트 플러그 편집",name:"이름",ipAddress:"IP 주소",linkedPrinter:"연결된 프린터",autoOn:"자동 켜기",autoOnDescription:"인쇄 시작 시 켜기",autoOff:"자동 끄기",autoOffDescription:"인쇄 완료 후 끄기",offDelay:"끄기 지연",offDelayMinutes:"인쇄 후 분",offDelayTemp:"노즐 온도 이하일 때",currentState:"현재 상태",turnOn:"켜기",turnOff:"끄기"},filamentTracking:"필라멘트 추적",filamentTrackingDesc:"필라멘트 스풀을 추적하는 방법을 선택하세요. 내장 인벤토리를 사용하거나 외부 Spoolman 서버에 연결할 수 있습니다.",filamentChecks:"필라멘트 확인",disableFilamentWarnings:"필라멘트 경고 비활성화",disableFilamentWarningsDesc:"인쇄 또는 대기열 추가 시 필라멘트 부족 경고 표시 안 함",preferLowestFilament:"남은 필라멘트가 가장 적은 것 우선",preferLowestFilamentDesc:"여러 스풀이 일치할 때 남은 필라멘트가 가장 적은 것 사용",trackingModeBuiltIn:"내장 인벤토리",trackingModeBuiltInDesc:"RFID 자동 매칭 및 사용량 추적 포함",trackingModeSpoolmanDesc:"외부 필라멘트 관리 서버",builtInFeatureRfid:"AMS의 Bambu Lab RFID 스풀 자동 감지",builtInFeatureUsage:"인쇄당 필라멘트 소비량 추적",builtInFeatureCatalog:"스풀, 색상, K 팩터 프로필 관리",builtInFeatureThirdParty:"서드파티 스풀을 인벤토리 스풀에 할당 가능",amsSyncButton:"AMS에서 무게 동기화",amsSyncTitle:"AMS에서 스풀 무게 동기화",amsSyncMessage:"연결된 프린터의 현재 AMS 잔여% 값으로 모든 인벤토리 스풀 무게를 덮어씁니다. 손상된 무게 데이터를 복구하는 데 사용하세요. 프린터가 온라인이어야 합니다.",amsSyncing:"동기화 중...",amsSyncSuccess:"{{synced}}개 스풀 동기화됨, {{skipped}}개 건너뜀",amsSyncError:"AMS에서 무게 동기화 실패",spoolmanAmsSyncButton:"AMS에서 Spoolman 무게 동기화",spoolmanAmsSyncTitle:"AMS에서 Spoolman 스풀 무게 동기화",spoolmanAmsSyncMessage:"연결된 프린터의 현재 AMS 잔여% 값으로 모든 Spoolman 스풀 무게를 업데이트합니다. 프린터가 온라인이어야 합니다.",spoolmanAmsSyncing:"동기화 중...",spoolmanAmsSyncSuccess:"{{synced}}개 스풀 동기화됨, {{skipped}}개 건너뜀",spoolmanAmsSyncError:"AMS에서 Spoolman 무게 동기화 실패",spoolmanAmsSyncErrorUnreachable:"Spoolman 무게 동기화 실패 (Spoolman 접근 불가)",spoolmanAmsSyncErrorNotConfigured:"Spoolman 무게 동기화 실패 (Spoolman 미설정)",spoolmanNotConfigured:"Spoolman 미설정",spoolmanFilamentCatalogTitle:"Spoolman 필라멘트 카탈로그",spoolmanFilamentCatalogDesc:"Spoolman 인스턴스의 필라멘트 이름 및 공 무게. 이름과 스풀 무게는 여기서 편집 가능하며 다른 속성은 Spoolman에서 직접 관리됩니다.",spoolmanUrl:"Spoolman URL",spoolmanUrlHint:"Spoolman 서버의 URL (예: http://localhost:7912)",spoolmanConnected:"연결됨",spoolmanDisconnected:"연결 끊김",status:"상태",connect:"연결",disconnect:"연결 해제",howSyncWorks:"동기화 작동 방식",syncInfoRfidOnly:"RFID가 있는 공식 Bambu Lab 스풀만 동기화됨",syncInfoAutoCreate:"새 스풀은 첫 번째 동기화 시 Spoolman에 자동 생성됨",syncInfoThirdPartySkipped:"비 Bambu Lab 스풀 (서드파티, 리필)은 건너뜀",linkingExistingSpools:"기존 스풀 연결",linkingExistingSpoolsDesc:'기존 Spoolman 스풀을 AMS에 연결하려면 AMS 슬롯 위에 마우스를 올리고 "Spoolman에 연결"을 클릭하세요.',syncMode:"동기화 모드",syncModeAuto:"자동",syncModeManual:"수동만",syncModeAutoDesc:"변경이 감지되면 AMS 데이터가 자동으로 동기화됨",syncModeManualDesc:"수동으로 트리거할 때만 동기화",syncAmsData:"AMS 데이터 동기화",syncAmsDataDesc:"프린터 AMS 데이터를 Spoolman에 수동으로 동기화",allPrinters:"모든 프린터",noDefaultPrinter:"기본값 없음 (매번 묻기)",sidebarOrder:"사이드바 순서",saveThumbnails:"썸네일 저장",captureFinishPhoto:"완료 사진 캡처",noPrintersConfigured:"설정된 프린터 없음",archiveMode:{always:"항상 아카이브 항목 생성",never:"아카이브 항목 생성 안 함",ask:"매번 묻기"},checkForUpdatesLabel:"업데이트 확인",checkPrinterFirmware:"프린터 펌웨어 확인",includeBetaUpdates:"베타 버전 포함",includeBetaUpdatesDesc:"업데이트 확인 시 베타 및 사전 릴리스 버전에 대해 알림",enableRetry:"재시도 활성화",homeAssistantDescription:"Home Assistant를 통해 스마트 플러그 제어",environmentManagedLabel:"(환경 변수 관리)",autoEnabledViaEnv:"환경 변수를 통해 자동 활성화됨",urlFromEnvReadOnly:"HA_URL 환경 변수에서 값 설정됨 (읽기 전용)",tokenFromEnvReadOnly:"HA_TOKEN 환경 변수에서 값 설정됨 (읽기 전용)",mqttConnectedTo:"연결됨",prometheusDescription:"Prometheus 형식으로 프린터 데이터 노출",noSmartPlugsTitle:"설정된 스마트 플러그 없음",noSmartPlugsDescription:"에너지 사용량 추적 및 전원 제어 자동화를 위해 Tasmota 기반 스마트 플러그를 추가하세요.",noProvidersTitle:"설정된 제공자 없음",noProvidersDescription:"알림을 받으려면 제공자를 추가하세요.",noTemplatesAvailable:"사용 가능한 템플릿 없음. 기본 템플릿을 시드하려면 백엔드를 재시작하세요.",apiPermissionView:"프린터 상태 및 대기열 보기",apiPermissionEdit:"인쇄 대기열에서 항목 추가 및 제거",apiKeysEmptyTitle:"API 키 없음",apiKeysEmptyDescription:"외부 서비스와 통합하려면 API 키를 만드세요.",noUsersFound:"사용자를 찾을 수 없습니다",noGroupsFound:"그룹을 찾을 수 없습니다",noGroupsAvailable:"사용 가능한 그룹 없음",passwordsDoNotMatch:"비밀번호가 일치하지 않습니다",systemGroupWarning:"시스템 그룹 이름은 변경할 수 없습니다",authDisabledTitle:"인증이 비활성화되어 있습니다",authDisabledFeature1:"시스템 접근 시 로그인 필요",authDisabledFeature2:"그룹 기반 권한으로 여러 사용자 생성",authDisabledFeature3:"50개 이상의 세분화된 권한으로 접근 제어",userHasCreated:"이 사용자가 만든 항목:",userItemsQuestion:"이 항목들을 어떻게 처리하시겠습니까?",deleteUserConfirm:"이 사용자를 삭제하시겠습니까?",actionCannotBeUndone:"이 작업은 취소할 수 없습니다.",addFirstSmartPlug:"첫 번째 스마트 플러그 추가",providers:"제공자",log:"로그",testAll:"모두 테스트",testResults:"테스트 결과",testPassedCount:"{{count}}개 통과",testFailedCount:"{{count}}개 실패",messageTemplates:"메시지 템플릿",messageTemplatesDescription:"각 이벤트에 대한 알림 메시지를 사용자 지정하세요.",apiKeys:"API 키",apiKeysDescription:"외부 통합 및 웹훅을 위한 API 키를 만드세요.",createKey:"키 만들기",apiKeyCreated:"API 키가 성공적으로 생성되었습니다",apiKeyCopyWarning:"지금 이 키를 복사하세요 - 다시 표시되지 않습니다!",useInApiBrowser:"API 브라우저에서 사용",createNewApiKey:"새 API 키 만들기",keyName:"키 이름",keyNamePlaceholder:"예: Home Assistant, OctoPrint",readStatus:"상태 읽기",readStatusDescription:"프린터 상태 및 대기열 보기",manageQueue:"대기열 관리",manageQueueDescription:"인쇄 대기열에서 항목 추가 및 제거",controlPrinter:"프린터 제어",controlPrinterDescription:"인쇄 일시정지, 재개, 정지",manageLibrary:"라이브러리 관리",manageLibraryDescription:"라이브러리 파일 업로드, 이름 변경 및 삭제; MakerWorld에서 모델 가져오기",manageInventory:"재고 관리",manageInventoryDescription:"스풀 및 재고 레코드 생성, 업데이트 및 삭제. SpoolBuddy 키오스크(NFC 스캔, 저울 측정값, 키오스크 시스템 명령)에 필요합니다.",libraryBadge:"라이브러리",inventoryBadge:"재고",cloudAccess:"클라우드 접근 허용",cloudAccessDescription:"사용자를 대신하여 Bambu Cloud 프리셋 및 필라멘트를 읽습니다. Bambu Cloud에 로그인되어 있어야 합니다.",cloudBadge:"클라우드",legacyKey:"레거시",legacyKeyTooltip:"사용자별 소유권 이전에 생성됨. 클라우드 접근을 사용하려면 재생성하세요",unnamedKey:"이름 없는 키",lastUsed:"마지막 사용",read:"읽기",control:"제어",createFirstKey:"첫 번째 키 만들기",webhookEndpoints:"웹훅 엔드포인트",webhookApiKeyHint:"X-API-Key 헤더에 API 키를 사용하세요.",webhook:{getAllStatus:"모든 프린터 상태 가져오기",getSpecificStatus:"특정 프린터 상태 가져오기",addToQueue:"인쇄 대기열에 추가",pausePrint:"인쇄 일시정지",resumePrint:"인쇄 재개",stopPrint:"인쇄 정지"},apiBrowser:"API 브라우저",apiBrowserDescription:"사용 가능한 모든 API 엔드포인트를 탐색하고 테스트하세요.",apiKeyForTesting:"테스트용 API 키",apiKeyPlaceholder:"인증된 엔드포인트를 테스트하려면 API 키를 여기에 붙여넣으세요...",apiKeyHint:"이 키는 요청과 함께 X-API-Key 헤더로 전송됩니다.",deleteApiKeyTitle:"API 키 삭제",deleteApiKeyMessage:"이 API 키를 삭제하시겠습니까? 이 키를 사용하는 모든 통합이 작동을 멈춥니다.",deleteKey:"키 삭제",amsDisplayThresholds:"AMS 표시 임계값",amsThresholdsDescription:"AMS 습도 및 온도 표시기의 색상 임계값을 설정하세요.",humidity:"습도",goodGreen:"좋음 (녹색)",fairOrange:"보통 (주황색)",aboveFairBad:"보통 임계값 초과 시 빨간색 (나쁨)으로 표시",fairAlsoDryingThreshold:"이 임계값은 자동 건조 활성화 시 트리거로도 사용됨",temperature:"온도",goodBlue:"좋음 (파란색)",aboveFairHot:"보통 임계값 초과 시 빨간색 (뜨거움)으로 표시",historyRetention:"기록 보존",keepSensorHistory:"센서 기록 보존 기간",historyRetentionDescription:"오래된 습도 및 온도 데이터가 자동으로 삭제됩니다",defaultPrintOptions:"기본 인쇄 옵션",defaultPrintOptionsDescription:"새 인쇄 시작 시 기본값을 설정하세요. 인쇄 대화 상자에서 인쇄별로 재정의할 수 있습니다.",defaultBedLevelling:"베드 레벨링",defaultBedLevellingDesc:"인쇄 전 자동 베드 레벨링",defaultFlowCali:"유량 캘리브레이션",defaultFlowCaliDesc:"압출 유량 캘리브레이션",defaultVibrationCali:"진동 캘리브레이션",defaultVibrationCaliDesc:"링잉 아티팩트 감소",defaultLayerInspect:"첫 번째 층 검사",defaultLayerInspectDesc:"첫 번째 층 AI 검사",defaultTimelapse:"타임랩스",defaultTimelapseDesc:"타임랩스 영상 녹화",staggeredStart:"엇갈린 시작",staggeredStartDescription:"다중 프린터 일괄 시작 시 기본 그룹 크기 및 간격. 인쇄 모달에서 배치별로 재정의할 수 있습니다.",plateClear:"플레이트 비움 확인",requirePlateClear:"플레이트 비움 확인 필요",requirePlateClearDescription:"활성화하면 스케줄러가 완료된 작업이 있는 프린터에서 대기 중인 인쇄를 시작하기 전에 프린터별 플레이트 비움 확인을 기다립니다.",gcodeInjection:"G코드 주입",gcodeInjectionDescription:"자동 인쇄 시스템을 위한 인쇄 시작 및/또는 종료 시 주입할 사용자 지정 G코드를 설정하세요.",gcodeInjectionNoPrinters:"프린터가 없습니다. G코드 스니펫을 설정하려면 프린터를 추가하세요.",gcodeStartLabel:"시작 G코드",gcodeEndLabel:"종료 G코드",gcodeStartPlaceholder:"인쇄 시작 전 앞에 추가되는 G코드...",gcodeEndPlaceholder:"인쇄 종료 후 뒤에 추가되는 G코드...",staggerGroupSize:"그룹 크기",staggerGroupSizeHelp:"그룹당 동시에 시작할 프린터 수",staggerInterval:"간격 (분)",staggerIntervalHelp:"각 그룹 시작 사이의 지연",queueDrying:"대기열 자동 건조",queueDryingDescription:"대기 중인 인쇄 사이에 프린터가 유휴 상태일 때 AMS 필라멘트를 자동으로 건조합니다.",queueDryingEnabled:"자동 건조 활성화",queueDryingEnabledDescription:"프린터가 유휴 상태이고 습도가 임계값 초과 시 자동으로 AMS 건조 시작",queueDryingBlock:"건조 완료까지 대기",queueDryingBlockDescription:"건조가 완료될 때까지 인쇄 대기열을 차단합니다. 끄면 인쇄가 건조보다 우선합니다.",ambientDryingEnabled:"주변 건조",ambientDryingEnabledDescription:"대기 중인 인쇄가 없어도 습도가 임계값을 초과하면 유휴 프린터에서 자동으로 필라멘트 건조",dryingPresets:"건조 프리셋",dryingPresetsDescription:"필라멘트 유형별 온도 및 시간. AMS 2 Pro는 낮은 온도, AMS-HT는 높은 온도를 지원합니다.",dryingFilament:"필라멘트",printModal:"인쇄 모달",expandCustomMapping:"사용자 지정 매핑 기본 펼침",expandCustomMappingDescription:"여러 프린터에 인쇄할 때 프린터별 AMS 매핑을 펼친 상태로 표시",authentication:"인증",authEnabledDescription:"인스턴스가 사용자 인증으로 보안됨",authDisabledDescription:"로그인 필요 및 사용자 접근 관리를 위해 활성화",authDisabledMessage:"사용자 계정 생성, 권한 관리, Bambuddy 인스턴스 보안을 위해 인증을 활성화하세요.",enableAuthentication:"인증 활성화",currentUser:"현재 사용자",changePassword:"비밀번호 변경",admin:"관리자",users:"사용자",addUser:"사용자 추가",groups:"그룹",addGroup:"그룹 추가",system:"시스템",noDescription:"설명 없음",userCount:"{{count}}명의 사용자",permissionCount:"{{count}}개 권한",createUser:"사용자 만들기",username:"사용자명",enterUsername:"사용자명 입력",password:"비밀번호",enterPassword:"비밀번호 입력 (최소 6자)",confirmPassword:"비밀번호 확인",confirmPasswordPlaceholder:"비밀번호 확인",viewReleaseOnGitHub:"GitHub에서 릴리스 보기",turnAllPlugsOn:"모든 플러그 켜기",turnAllPlugsOff:"모든 플러그 끄기",clearNotificationLogs:"알림 로그 지우기",clearLogsMessage:"30일보다 오래된 모든 알림 로그를 영구적으로 삭제합니다. 이 작업은 취소할 수 없습니다.",clearLogs:"로그 지우기",resetUiPreferences:"UI 기본 설정 초기화",resetUiPreferencesMessage:"모든 UI 기본 설정을 기본값으로 초기화합니다: 사이드바 순서, 테마, 대시보드 레이아웃, 보기 모드, 정렬 기본 설정. 프린터, 아카이브, 서버 설정은 영향받지 않습니다. 지운 후 페이지가 새로고침됩니다.",resetPreferences:"기본 설정 초기화",deleteGroupTitle:"그룹 삭제",deleteGroupMessage:"이 그룹을 삭제하시겠습니까? 이 그룹의 사용자는 이 권한을 잃게 됩니다.",deleteGroup:"그룹 삭제",disableAuthenticationTitle:"인증 비활성화",disableAuthenticationMessage:"인증을 비활성화하시겠습니까? 이렇게 하면 로그인 없이 Bambuddy 인스턴스에 접근할 수 있게 됩니다. 모든 사용자는 데이터베이스에 유지되지만 인증은 비활성화됩니다.",disableAuthentication:"인증 비활성화",configureBambuddy:"Bambuddy 설정",systemDefault:"시스템 기본값",archiveSettings:"아카이브 설정",newWindow:"새 창",embeddedOverlay:"내장 오버레이",preferredSlicer:"선호하는 슬라이서",preferredSlicerDescription:"파일을 열 슬라이서 앱을 선택하세요",orcaslicerKnownIssuesWarning:"OrcaSlicer 2.3.2 / 2.4.0-dev에는 Bambu 제작 3MF 파일 슬라이싱을 차단하는 알려진 CLI 버그가 있습니다. 업스트림 수정이 출시될 때까지 Bambu Studio를 사용하는 것이 좋습니다.",useSlicerApi:"슬라이서 API 사용",useSlicerApiDescription:'켜면 "슬라이스" 작업이 앱 내 슬라이서 모달을 열고 슬라이서 API 사이드카를 호출합니다. 끄면 URI 스킴을 통해 데스크톱 슬라이서로 전달합니다.',slicerCard:"슬라이서",orcaslicerApiUrl:"OrcaSlicer 사이드카 URL",bambuStudioApiUrl:"Bambu Studio 사이드카 URL",slicerApiUrlDescription:"슬라이서 API 사이드카 컨테이너의 URL. SLICER_API_URL / BAMBU_STUDIO_API_URL 환경 변수 기본값을 사용하려면 비워두세요.",slicerBundles:{title:"슬라이서 번들",description:"BambuStudio에서 내보낸 프린터 프리셋 번들(.bbscfg)을 가져오세요. 가져온 후 슬라이스 요청이 JSON 프로필 트리플렛을 다시 업로드하지 않고 번들에서 이름으로 프리셋을 선택할 수 있습니다.",uploadButton:"번들 업로드",uploading:"업로드 중…",loading:"번들 로딩 중…",empty:"아직 가져온 번들 없음.",summary:"{{processCount}}개 프로세스 · {{filamentCount}}개 필라멘트 프리셋",delete:"삭제",uploadSuccess:"{{name}} 가져옴",uploadError:"번들 업로드 실패: {{message}}",deleteSuccess:"번들 제거됨",deleteError:"번들 삭제 실패: {{message}}",confirmDeleteTitle:"이 번들을 제거하시겠습니까?",confirmDeleteMessage:'"{{name}}"을(를) 참조하는 슬라이스 요청은 번들이 재가져오기될 때까지 실패합니다.'},externalCameras:"외부 카메라",costTracking:"비용 추적",printsOnly:"인쇄만",totalConsumption:"총 소비",dataManagement:"데이터 관리",storageUsage:"저장소 사용량",storageUsageDescription:"카테고리별 데이터 사용량 분류",storageUsageTotal:"총계",storageUsageErrors:"오류",storageUsageOtherBreakdown:"기타 (정적 자산, 스크립트, 구성 파일 포함)",storageUsageSystem:"시스템",storageUsageData:"데이터",storageUsageUnavailable:"저장소 사용량 정보 불가",clearNotificationLogsDescription:"30일보다 오래된 알림 로그 삭제",resetUiPreferencesDescription:"사이드바 순서, 테마, 보기 모드, 레이아웃 기본 설정 초기화. 프린터, 아카이브, 설정은 영향받지 않습니다.",enableHomeAssistant:"Home Assistant 활성화",enableMqtt:"MQTT 활성화",useTls:"TLS 사용",enableMetricsEndpoint:"메트릭 엔드포인트 활성화",availableMetrics:"사용 가능한 메트릭",editUser:"사용자 편집",deleteUserTitle:"사용자 삭제",groupName:"그룹 이름",leaveEmptyForAnonymous:"익명으로 두려면 비워두세요",leaveEmptyForNoAuth:"인증 없이 두려면 비워두세요",enterNewPassword:"새 비밀번호 입력",confirmNewPassword:"새 비밀번호 확인",enterGroupName:"그룹 이름 입력",enterDescriptionOptional:"설명 입력 (선택사항)",enterCurrentPassword:"현재 비밀번호 입력",enterNewPasswordMin6:"새 비밀번호 입력 (최소 6자)",toast:{keyCopied:"키가 클립보드에 복사되었습니다",copyFailed:"키 복사 실패",keyAddedToBrowser:"API 브라우저에 키가 추가되었습니다",clearLogsFailed:"로그 지우기 실패",uiPreferencesReset:"UI 기본 설정이 초기화되었습니다. 새로고침 중...",authDisabled:"인증이 성공적으로 비활성화되었습니다",authDisableFailed:"인증 비활성화 실패",apiKeyCreated:"API 키가 생성되었습니다",apiKeyDeleted:"API 키가 삭제되었습니다",userCreated:"사용자가 성공적으로 생성되었습니다",userUpdated:"사용자가 성공적으로 업데이트되었습니다",userDeleted:"사용자가 성공적으로 삭제되었습니다",groupCreated:"그룹이 성공적으로 생성되었습니다",groupUpdated:"그룹이 성공적으로 업데이트되었습니다",groupDeleted:"그룹이 성공적으로 삭제되었습니다",fillRequiredFields:"모든 필수 항목을 입력하세요",passwordsDoNotMatch:"비밀번호가 일치하지 않습니다",passwordTooShort:"비밀번호는 최소 6자여야 합니다",enterGroupName:"그룹 이름을 입력하세요",settingsSaved:"설정이 저장되었습니다",noPermissionUpdate:"설정을 변경할 권한이 없습니다",cameraSettingsSaved:"카메라 설정이 저장되었습니다",enterCameraUrl:"카메라 URL을 입력하세요",passwordChanged:"비밀번호가 성공적으로 변경되었습니다",connectionFailed:"연결 실패",testFailed:"테스트 실패",cameraConnected:"카메라 연결됨{{resolution}}",passwordNeedsUppercase:"비밀번호에 대문자가 최소 1개 포함되어야 합니다",passwordNeedsLowercase:"비밀번호에 소문자가 최소 1개 포함되어야 합니다",passwordNeedsDigit:"비밀번호에 숫자가 최소 1개 포함되어야 합니다",passwordNeedsSpecial:"비밀번호에 특수문자가 최소 1개 포함되어야 합니다"},testConnection:"연결 테스트",catalog:{spoolCatalog:"스풀 카탈로그",spoolCatalogDescription:"브랜드/유형별 빈 스풀 무게. 스풀 추가 시 자동 무게 조회에 사용됩니다.",searchCatalog:"카탈로그 검색...",addNewEntry:"새 항목 추가",namePlaceholder:"이름 (예: Bambu Lab - Plastic)",weight:"무게",type:"유형",default:"기본",custom:"사용자 지정",noMatch:"검색에 일치하는 항목 없음",empty:"카탈로그에 항목 없음",deleteEntry:"항목 삭제",deleteConfirm:'"{{name}}"을(를) 삭제하시겠습니까?',resetCatalog:"카탈로그 초기화",resetConfirm:"카탈로그를 기본값으로 초기화하시겠습니까? 모든 사용자 지정 항목이 제거됩니다.",loadFailed:"스풀 카탈로그 로드 실패",nameWeightRequired:"이름과 무게가 필요합니다",entryAdded:"항목이 추가되었습니다",addFailed:"항목 추가 실패",entryUpdated:"항목이 업데이트되었습니다",updateFailed:"항목 업데이트 실패",entryDeleted:"항목이 삭제되었습니다",deleteFailed:"항목 삭제 실패",resetSuccess:"카탈로그가 기본값으로 초기화되었습니다",resetFailed:"카탈로그 초기화 실패",exported:"{{count}}개 항목이 내보내졌습니다",imported:"{{added}}개 항목 가져옴 ({{skipped}}개 건너뜀)",importFailed:"가져오기 실패: 잘못된 JSON 형식",exportTooltip:"JSON으로 카탈로그 내보내기",importTooltip:"JSON에서 카탈로그 가져오기",resetTooltip:"기본값으로 초기화",selectedCount:"{{count}}개 선택됨",deleteSelected:"선택 항목 삭제",bulkDeleteConfirm:"{{count}}개 항목을 삭제하시겠습니까?",bulkDeleted:"{{count}}개 항목이 삭제되었습니다",bulkDeleteFailed:"항목 삭제 실패",material:"재료",spoolWeight:"스풀 무게",color:"색상",updateSpoolWeight:"스풀 무게 업데이트",filamentUpdated:"필라멘트가 업데이트되었습니다",filamentUpdateFailed:"필라멘트 업데이트 실패",filamentUpdateInvalid:"잘못된 필라멘트 데이터",keepExistingSpoolWeight:"기존 스풀에 이전 무게 유지",keepExistingSpoolWeightDesc:"이 필라멘트 유형으로 이미 생성된 스풀은 이전 공 무게를 유지합니다. 새 스풀은 업데이트된 값을 사용합니다.",applyToAllSpools:"모든 스풀에 적용",applyToAllSpoolsDesc:"이 필라멘트 유형의 모든 무게 계산이 즉시 새 공 무게를 사용합니다."},colorCatalog:{title:"색상 카탈로그",description:"제조사/재료별 필라멘트 색상. 스풀 추가 시 자동 색상 조회에 사용됩니다.",searchColors:"색상 검색...",allManufacturers:"모든 제조사",addNewColor:"새 색상 추가",manufacturer:"제조사",colorName:"색상 이름",hex:"헥스",materialOptional:"재료 (선택사항)",showing:"{{total}}개 중 {{filtered}}개 색상 표시",noMatch:"검색에 일치하는 색상 없음",empty:"카탈로그에 색상 없음",deleteColor:"색상 삭제",deleteConfirm:'"{{name}}"을(를) 삭제하시겠습니까?',resetCatalog:"색상 카탈로그 초기화",resetConfirm:"카탈로그를 기본값으로 초기화하시겠습니까? 모든 사용자 지정 색상이 제거됩니다.",sync:"동기화",starting:"시작 중...",syncTooltip:"FilamentColors.xyz에서 동기화 (2000개 이상 색상, 약 1분 소요)",loadFailed:"색상 카탈로그 로드 실패",fieldsRequired:"제조사, 색상 이름, 헥스 색상이 필요합니다",colorAdded:"색상이 추가되었습니다",addFailed:"색상 추가 실패",colorUpdated:"색상이 업데이트되었습니다",updateFailed:"색상 업데이트 실패",colorDeleted:"색상이 삭제되었습니다",deleteFailed:"색상 삭제 실패",resetSuccess:"색상 카탈로그가 기본값으로 초기화되었습니다",resetFailed:"카탈로그 초기화 실패",syncUpToDate:"이미 최신 상태 ({{count}}개 색상 확인됨)",syncComplete:"{{added}}개 새 색상 추가됨 ({{skipped}}개 이미 존재)",syncError:"동기화 오류",syncFailed:"FilamentColors.xyz에서 동기화 실패",exported:"{{count}}개 색상이 내보내졌습니다",imported:"{{added}}개 색상 가져옴 ({{skipped}}개 건너뜀)",importFailed:"가져오기 실패: 잘못된 JSON 형식",selectedCount:"{{count}}개 선택됨",deleteSelected:"선택 항목 삭제",bulkDeleteConfirm:"{{count}}개 색상을 삭제하시겠습니까?",bulkDeleted:"{{count}}개 색상이 삭제되었습니다",bulkDeleteFailed:"색상 삭제 실패"},dateFormat:"날짜 형식",dateFormatUs:"미국 (MM/DD/YYYY)",dateFormatEu:"유럽 (DD/MM/YYYY)",dateFormatIso:"ISO (YYYY-MM-DD)",timeFormat:"시간 형식",timeFormat12:"12시간 (오후 3:30)",timeFormat24:"24시간 (15:30)",defaultPrinter:"기본 프린터",defaultPrinterDescription:"업로드, 재인쇄 등 작업에서 이 프린터를 미리 선택합니다.",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"사이드바의 항목을 드래그하여 순서를 변경하세요. 여기서 기본 순서로 초기화하세요.",setDefault:"기본값 설정",sidebarOrderSetDefaultHint:"기본값 설정은 현재 메뉴 순서를 사용자 지정하지 않은 사용자에게 적용합니다.",sidebarDefaultSet:"기본 메뉴 순서가 설정되었습니다.",sidebarDefaultCleared:"기본 메뉴 순서가 지워졌습니다.",sidebarDefaultFailed:"기본 메뉴 순서 설정 실패.",reset:"초기화",darkMode:"다크 모드",lightMode:"라이트 모드",active:"(활성)",background:"배경",accent:"강조",style:"스타일",bgNeutral:"중립",bgWarm:"따뜻함",bgCool:"시원함",bgOled:"OLED 블랙",bgSlate:"슬레이트 블루",bgForest:"포레스트 그린",accentGreen:"그린",accentTeal:"틸",accentBlue:"블루",accentOrange:"오렌지",accentPurple:"퍼플",accentRed:"레드",styleClassic:"클래식",styleGlow:"글로우",styleVibrant:"비브런트",themeToggleHint:"사이드바의 태양/달 아이콘으로 다크 모드와 라이트 모드를 전환하세요.",autoArchivePrints:"인쇄 자동 아카이브",autoArchiveDescription:"인쇄 완료 시 3MF 파일 자동 저장",saveThumbnailsDescription:"3MF 파일에서 미리보기 이미지 추출 및 저장",captureFinishPhotoDescription:"인쇄 완료 시 프린터 카메라로 사진 촬영",ffmpegNotInstalled:"ffmpeg 미설치",ffmpegRequired:"카메라 캡처에 ffmpeg가 필요합니다. macOS에서는 <brew>brew install ffmpeg</brew>, Linux에서는 <apt>apt install ffmpeg</apt>로 설치하세요.",camera:"카메라",cameraViewMode:"카메라 보기 모드",cameraOverlayDescription:"카메라가 메인 화면의 크기 조절 가능한 오버레이에서 열립니다",cameraWindowDescription:"카메라가 별도의 브라우저 창에서 열립니다",externalCamerasDescription:"내장 프린터 카메라를 교체할 외부 카메라를 설정하세요. MJPEG 스트림, RTSP, HTTP 스냅샷, USB 카메라(V4L2)를 지원합니다.",cameraPlaceholderUsb:"장치 경로 (/dev/video0)",cameraPlaceholderUrl:"카메라 URL (rtsp://... 또는 http://...)",cameraTypeMjpeg:"MJPEG 스트림",cameraTypeRtsp:"RTSP 스트림",cameraTypeSnapshot:"HTTP 스냅샷",cameraTypeUsb:"USB 카메라 (V4L2)",cameraSnapshotUrl:"스냅샷 URL (선택사항)",cameraSnapshotUrlPlaceholder:"http://192.168.1.61:1984/api/frame.jpeg?src=printer",cameraSnapshotUrlHelp:"알림 썸네일, 완료 사진, 타임랩스, 플레이트 감지에 사용되는 단일 프레임 URL.",cameraRotation:"회전",test:"테스트",connected:"연결됨",disconnected:"연결 끊김",currency:"통화",defaultFilamentCost:"기본 필라멘트 비용 (kg당)",electricityCost:"kWh당 전기 비용",energyDisplayMode:"에너지 표시 모드",energyModePrintDescription:"대시보드가 인쇄 중 사용된 에너지 합계를 표시",energyModeTotalDescription:"대시보드가 스마트 플러그의 전체 에너지를 표시",fileManager:"파일 관리자",createArchiveEntry:"인쇄 시 아카이브 항목 생성",createArchiveEntryDescription:"파일 관리자에서 인쇄할 때 선택적으로 아카이브 항목 생성",lowDiskSpaceWarning:"디스크 공간 부족 경고",lowDiskSpaceDescription:"여유 디스크 공간이 이 임계값 아래로 떨어지면 경고 표시",printerFirmware:"프린터 펌웨어",checkFirmwareDescription:"Bambu Lab의 프린터 펌웨어 업데이트 확인",bambuddySoftware:"Bambuddy 소프트웨어",autoCheckDescription:"시작 시 자동으로 새 버전 확인",checkNow:"지금 확인",updateAvailableVersion:"업데이트 가능: v{{version}}",releaseNotes:"릴리스 노트",updateViaDocker:"Docker Compose로 업데이트:",updateViaHomeAssistant:"업데이트는 Home Assistant 수퍼바이저에서 관리됩니다. Home Assistant에서 설정 → 애드온 → Bambuddy를 열어 새 버전을 설치하세요.",installUpdate:"업데이트 설치",latestVersionRunning:"최신 버전을 실행 중입니다",failedToCheckUpdates:"업데이트 확인 실패: {{error}}",backupRestore:"백업 및 복원",backupRestoreDescription:"설정 내보내기/가져오기 및 GitHub 백업 설정",goToBackup:"백업으로 이동",externalUrl:"외부 URL",externalUrlDescription:"Bambuddy에 접근할 수 있는 외부 URL. 알림 이미지 및 외부 통합에 사용됩니다.",bambuddyUrl:"Bambuddy URL",externalUrlHint:"프로토콜과 포트를 포함하세요 (예: http://192.168.1.100:8000)",ftpRetry:"FTP 재시도",ftpRetryDescription:"프린터 WiFi가 불안정할 때 FTP 작업을 재시도합니다.",autoRetryDescription:"실패한 FTP 작업 자동 재시도",retryAttempts:"재시도 횟수",retryDelay:"재시도 지연",connectionTimeout:"연결 제한 시간",time_one:"{{count}}번",time_other:"{{count}}번",second_one:"{{count}}초",second_other:"{{count}}초",nSeconds:"{{count}}초",increaseForWeakWifi:"WiFi가 약한 프린터에서 늘리세요",homeAssistant:"Home Assistant",homeAssistantFullDescription:"Home Assistant의 REST API를 통해 스마트 플러그를 제어하려면 연결하세요.",homeAssistantUrl:"Home Assistant URL",longLivedAccessToken:"장기 액세스 토큰",haTokenHint:"HA에서 토큰 생성: 프로필 → 장기 액세스 토큰 → 토큰 생성",connectionSuccessful:"연결 성공",connectionFailed:"연결 실패",haConnectionSuccess:"Home Assistant에 성공적으로 연결되었습니다.",haConnectionFailed:"Home Assistant 연결 실패.",mqttPublishing:"MQTT 게시",mqttDescription:"Node-RED, Home Assistant 등 자동화 시스템과 통합하기 위해 Bambuddy 이벤트를 외부 MQTT 브로커에 게시하세요.",mqttEnableDescription:"외부 MQTT 브로커에 이벤트 게시",brokerHostname:"브로커 호스트명",port:"포트",usernameOptional:"사용자명 (선택사항)",passwordOptional:"비밀번호 (선택사항)",topicPrefix:"토픽 접두사",topicPrefixHint:"토픽은 다음과 같습니다: {{prefix}}/printers/<serial>/status 등",prometheusMetrics:"Prometheus 메트릭",prometheusEndpointDescription:"Prometheus/Grafana 모니터링을 위해 <code>/api/v1/metrics</code>에서 프린터 메트릭을 노출합니다.",bearerTokenOptional:"베어러 토큰 (선택사항)",bearerTokenHint:"설정하면 요청에 <code>Authorization: Bearer <token></code>을 포함해야 합니다",metricsConnectionStatus:"연결 상태",metricsPrinterState:"프린터 상태 (유휴/인쇄 중/등)",metricsPrintProgress:"인쇄 진행 0-100%",metricsBedTemp:"베드 온도",metricsNozzleTemp:"노즐 온도",metricsPrintsTotal:"결과별 총 인쇄 수",metricsMore:"...및 더 많은 것 (레이어, 팬, 대기열, 필라멘트 사용량)",smartPlugsDescription:"에너지 사용량 추적 및 프린터 전원 제어를 자동화하기 위해 스마트 플러그(Tasmota 또는 Home Assistant)를 연결하세요.",allOn:"모두 켜기",allOff:"모두 끄기",addSmartPlug:"스마트 플러그 추가",energySummary:"에너지 요약",currentPower:"현재 전력",plugsOnline:"{{reachable}}/{{total}}개 플러그 온라인",today:"오늘",yesterday:"어제",total:"총계",enablePlugsForSummary:"에너지 요약을 보려면 플러그를 활성화하세요",addNotificationProvider:"추가",systemBadge:"(시스템)",creating:"생성 중...",changing:"변경 중...",deleteUserAndItems:"사용자 및 항목 삭제",deleteUserKeepItems:"사용자 삭제, 항목 유지 (소유자 없음)",ok:"확인",twoFa:{totpTitle:"인증 앱 (TOTP)",totpDesc:"Google Authenticator, Aegis, Authy 같은 인증 앱을 사용하세요.",emailOtpTitle:"이메일 OTP",emailOtpDesc:"로그인 시 {{email}}로 일회용 코드를 전송합니다.",emailOtpNoEmail:"이 방법을 활성화하려면 계정에 이메일 주소를 추가하세요.",addEmailFirst:"계정에 이메일 주소가 없습니다. 이메일 OTP를 활성화하기 전에 관리자에게 추가를 요청하세요.",setupTotp:"인증 앱 설정",setupAuthApp:"인증 앱 설정",setupInstructions:"아래 QR 코드를 인증 앱으로 스캔한 후 코드로 확인하세요.",manualEntry:"스캔할 수 없나요? 이 비밀을 수동으로 입력하세요:",scannedContinue:"코드를 스캔했습니다 — 계속",enterCodeToConfirm:"인증 앱의 6자리 코드를 입력하여 설정을 확인하세요.",activate:"활성화",disableTotp:"인증기 비활성화",disableConfirmHint:"인증기를 비활성화하려면 유효한 TOTP 코드나 백업 코드를 입력하세요.",totpDisabled:"인증 앱이 비활성화되었습니다.",emailOtpEnabled:"이메일 OTP가 활성화되었습니다.",emailOtpDisabled:"이메일 OTP가 비활성화되었습니다.",smtpRequired:"먼저 SMTP 설정을 구성하고 테스트하세요.",invalidCode:"잘못된 코드입니다. 다시 시도하세요.",enableEmailOtp:"이메일 OTP 활성화",disableEmailOtp:"이메일 OTP 비활성화",emailSetupEnterCode:"이메일 주소로 인증 코드가 전송되었습니다. 아래에 입력하여 이 받은 편지함을 소유하고 있음을 확인하세요.",verifyAndEnable:"확인 및 활성화",emailDisablePasswordHint:"이메일 OTP 비활성화를 확인하려면 계정 비밀번호를 입력하세요.",passwordPlaceholder:"비밀번호 입력",backupCodesTitle:"백업 코드 저장",backupCodesWarning:"이 코드를 안전한 곳에 저장하세요. 각 코드는 한 번만 사용할 수 있으며 다시 표시되지 않습니다.",backupCodesRemaining:"{{count}}개 백업 코드 남음",savedCodes:"코드를 저장했습니다",regenBackup:"백업 코드 재생성",regenBackupHint:"현재 TOTP 코드를 입력하여 10개의 새 백업 코드를 생성하세요. 기존 백업 코드는 모두 무효화됩니다.",newBackupCodes:"새 백업 코드",linkedAccounts:"연결된 SSO 계정",linkedAccountsDesc:"이 외부 ID 제공자가 계정에 연결되어 있습니다.",oidcUnlinked:"계정 연결이 해제되었습니다."},oidc:{title:"SSO / OIDC 제공자",desc:"외부 ID 제공자를 통해 싱글 사인온을 허용하도록 OpenID Connect 제공자를 설정하세요.",addProvider:"제공자 추가",newProvider:"새 제공자",empty:"아직 설정된 OIDC 제공자가 없습니다.",created:"제공자가 생성되었습니다.",updated:"제공자가 업데이트되었습니다.",deleted:"제공자가 삭제되었습니다.",deleteTitle:"제공자 삭제",deleteMessage:'"{{name}}"을(를) 삭제하시겠습니까? 연결된 모든 사용자 계정의 연결이 해제됩니다.',form:{name:"표시 이름",issuerUrl:"발급자 URL",clientId:"클라이언트 ID",clientSecret:"클라이언트 시크릿",scopes:"범위",iconUrl:"아이콘 URL (선택사항)",enabled:"활성화됨",autoCreate:"사용자 자동 생성",autoCreateDesc:"첫 번째 로그인 시 자동으로 로컬 계정 생성.",autoLink:"기존 계정 자동 연결",autoLinkDesc:"첫 번째 로그인 시 이메일 일치로 기존 로컬 계정 연결.",secretHint:"현재 값을 유지하려면 비워두세요",secretPlaceholder:"새 시크릿",emailClaim:"이메일 클레임",emailClaimDesc:"이메일 ID로 사용되는 JWT 클레임.",emailClaimPlaceholder:"email",emailClaimCustomClaimAutoLinkWarning:"사용자 지정 클레임은 값이 테넌트 관리인 경우에만 자동 연결에 안전합니다. IdP가 사용자가 이 클레임을 직접 주장할 수 있게 하면 자동 연결을 활성화하지 마세요.",requireEmailVerified:"이메일 확인 필요",requireEmailVerifiedDesc:"제공자가 확인된 것으로 표시한 경우에만 이메일 클레임을 수락합니다.",requireEmailVerifiedWarning:"경고: 확인 없이도 이메일이 수락됩니다. 신뢰할 수 있는 제공자에만 사용하세요.",requireEmailVerifiedAutoLink:"이 설정을 변경하려면 먼저 자동 연결을 비활성화하세요.",defaultGroup:"기본 그룹",defaultGroupDesc:"자동 생성된 사용자에게 할당되는 그룹. 설정되지 않으면 Viewers로 대체됩니다.",defaultGroupViewersFallback:"Viewers (기본값)"},refreshIcon:"아이콘 새로고침",removeIcon:"아이콘 제거",iconRefreshed:"아이콘이 새로고침되었습니다.",iconRemoved:"아이콘이 제거되었습니다.",iconFetchFailed:"공급자 URL에서 아이콘을 가져올 수 없습니다."},encryption:{title:"MFA 암호화 상태",enabledFromEnv:"저장 시 암호화 활성화됨 (MFA_ENCRYPTION_KEY 환경 변수에서 키)",enabledFromFile:"저장 시 암호화 활성화됨 (데이터 디렉토리에서 키 로드됨)",enabledGenerated:"자동 생성된 키로 저장 시 암호화 활성화됨",notConfigured:"저장 시 암호화가 설정되지 않음",notConfiguredDesc:"TOTP 시크릿 및 OIDC client_secret이 일반 텍스트로 저장됩니다. MFA_ENCRYPTION_KEY를 설정하거나 쓰기 가능한 데이터 디렉토리로 Bambuddy를 재시작하여 자동 생성하세요.",allEncrypted:"모든 MFA 시크릿이 저장 시 암호화되어 있습니다.",legacyRowsLabel:"레거시 일반 텍스트 행",encryptedRowsLabel:"암호화된 행",legacyRowsWarning:"{{count}}개 레거시 일반 텍스트 행이 감지되었습니다. 암호화된 저장소로 마이그레이션하려면 OIDC 제공자를 다시 저장하거나 사용자의 인증 앱을 재등록하세요.",backupHint:"자동 생성된 키는 DATA_DIR/.mfa_encryption_key에 저장되며 로컬 백업 ZIP에 포함됩니다. 백업을 안전하게 보관하거나 MFA_ENCRYPTION_KEY를 명시적으로 설정하세요.",decryptionBrokenTitle:"암호화 키 누락",decryptionBrokenError:"암호화 키를 더 이상 사용할 수 없어 {{count}}개의 암호화된 레코드를 복호화할 수 없습니다.",migrationErrorWarning:"시작 시 {{count}}개 레거시 행을 재암호화하지 못했습니다. 서버 로그를 확인하고 Bambuddy를 재시작하여 재시도하세요."},updateEnergyCost:"전기 요금 업데이트",updateEnergyCostDescription:"이 키가 /settings/electricity-price에 새 kWh당 전기 요금을 POST할 수 있도록 허용합니다. Home Assistant 동적 요금 자동화(Tibber, Octopus 등)에 유용합니다. API 키로 쓸 수 있는 유일한 설정 필드입니다.",energyCostBadge:"에너지",passwordRequirements:"최소 8자, 대문자, 소문자, 숫자, 특수문자 각 1개 이상 포함"},notification:{printStarted:{title:"인쇄 시작됨",body:"{{printer}}: {{filename}} 인쇄가 시작되었습니다"},printCompleted:{title:"인쇄 완료됨",body:"{{printer}}: {{filename}}이(가) 성공적으로 완료되었습니다"},printFailed:{title:"인쇄 실패",body:"{{printer}}: {{filename}}이(가) 실패했습니다"},printStopped:{title:"인쇄 정지됨",body:"{{printer}}: {{filename}}이(가) 정지되었습니다"},printProgress:{title:"인쇄 진행",body:"{{printer}}: {{filename}} {{percent}}% 완료"},printerOffline:{title:"프린터 오프라인",body:"{{printer}}이(가) 오프라인 상태입니다"},printerError:{title:"프린터 오류",body:"{{printer}}: {{error}}"},filamentLow:{title:"필라멘트 부족",body:"{{printer}}: 필라멘트가 부족합니다"},maintenanceDue:{title:"유지보수 예정",body:"{{printer}}: {{items}} 주의 필요"}},errors:{generic:"문제가 발생했습니다",networkError:"네트워크 오류. 연결을 확인하세요.",notFound:"찾을 수 없습니다",unauthorized:"권한 없음",serverError:"서버 오류",validationError:"입력값을 확인하세요",printerConnectionFailed:"프린터 연결 실패",saveFailed:"변경사항 저장 실패",deleteFailed:"삭제 실패",loadFailed:"데이터 로드 실패"},hmsErrors:{title:"오류 - {{name}}",noErrors:"오류 없음",viewOnWiki:"Bambu Lab 위키에서 보기",clearInstructions:"오류를 해제하려면 프린터에서 오류를 지우세요.",clearErrors:"오류 지우기",clearSuccess:"HMS 오류가 지워졌습니다",clearFailed:"HMS 오류 지우기 실패"},mqttDebug:{title:"MQTT 디버그 로그",searchPlaceholder:"토픽 또는 페이로드 검색...",noMessages:"아직 기록된 메시지 없음",startLoggingHint:'"로깅 시작"을 클릭하여 MQTT 메시지 캡처 시작',noMessagesMatch:"필터에 일치하는 메시지 없음",adjustFilterHint:"검색 또는 필터 기준을 조정해 보세요",incoming:"수신",outgoing:"송신",loggingStopped:"로깅 정지됨",loggingActive:"로깅 활성 - 메시지가 자동 새로고침됨",startLogging:"로깅 시작",stopLogging:"로깅 정지",clearLog:"로그 지우기",topic:"토픽",timestamp:"타임스탬프",direction:"방향",all:"전체"},printerFiles:{title:"파일 관리자",storageUsed:"사용됨:",storageFree:"여유:",filterPlaceholder:"파일 필터...",deleteButton:"삭제",deleteFiles:"{{count}}개 파일 삭제",deleteFileConfirm:'"{{name}}"을(를) 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.',deleteFilesConfirm:"선택된 {{count}}개 파일을 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.",noFiles:"프린터에 파일 없음",loadingFiles:"파일 로딩 중...",failedToLoad:"파일 로드 실패",toast:{filesDeleted:"{{count}}개 파일이 삭제되었습니다",deleteFailed:"삭제 실패: {{error}}"}},confirm:{delete:"이것을 삭제하시겠습니까?",unsavedChanges:"저장되지 않은 변경사항이 있습니다. 정말 나가시겠습니까?",clearQueue:"대기열을 지우시겠습니까?"},login:{title:"Bambuddy 로그인",subtitle:"계정에 로그인하세요",username:"사용자명",usernamePlaceholder:"사용자명을 입력하세요",usernameOrEmail:"사용자명 또는 이메일",usernameOrEmailPlaceholder:"사용자명 또는 @ 이메일",password:"비밀번호",passwordPlaceholder:"비밀번호를 입력하세요",signIn:"로그인",signingIn:"로그인 중...",rememberMe:"로그인 유지",forgotPassword:"비밀번호를 잊으셨나요?",loginSuccess:"성공적으로 로그인되었습니다",loginFailed:"로그인 실패",enterCredentials:"사용자명과 비밀번호를 입력하세요",enterEmail:"이메일 주소를 입력하세요",oidcLoginFailed:"OIDC 로그인 실패",oidcErrors:{providerError:"ID 제공자에서 오류가 반환되었습니다",missingParameters:"OIDC 콜백에 필수 매개변수가 없습니다",invalidState:"OIDC 상태가 잘못되었거나 이미 사용되었습니다",stateExpired:"OIDC 로그인 세션이 만료되었습니다 — 다시 시도하세요",providerNotFound:"OIDC 제공자를 찾을 수 없습니다",discoveryFailed:"OIDC 검색 문서를 가져오지 못했습니다",invalidDiscovery:"OIDC 검색 문서가 잘못되었습니다",networkError:"OIDC 토큰 교환 중 네트워크 오류",badResponse:"OIDC 토큰 교환 중 예상치 못한 응답",noIdToken:"OIDC 제공자가 ID 토큰을 반환하지 않았습니다",validationFailed:"OIDC 토큰 검증 실패",nonceMismatch:"OIDC 논스 불일치 — 재생 공격 가능성",missingSubClaim:"OIDC 토큰에 sub 클레임이 없습니다",noLinkedAccount:"OIDC ID에 연결된 로컬 계정이 없습니다",accountInactive:"계정이 비활성 상태입니다",userResolutionFailed:"계정 확인 실패",internalError:"OIDC 로그인 중 내부 오류 발생",tokenExchangeFailed:"OIDC 토큰 교환 실패"},forgotPasswordTitle:"비밀번호 찾기",forgotPasswordMessage:"비밀번호를 잊으셨다면 시스템 관리자에게 초기화를 요청하세요.",forgotPasswordEmailMessage:"이메일 주소를 입력하면 새 비밀번호를 전송해 드립니다.",emailAddress:"이메일 주소",emailPlaceholder:"your.email@example.com",cancel:"취소",sending:"전송 중...",sendResetEmail:"초기화 이메일 전송",howToReset:"비밀번호 초기화 방법:",resetStep1:"Bambuddy 관리자에게 문의하세요",resetStep2:"사용자 관리에서 비밀번호 초기화를 요청하세요",resetStep3:"관리자가 임시 비밀번호를 설정해 드립니다",resetStep4:"새 비밀번호로 로그인하고 설정에서 변경하세요",gotIt:"확인",resetPassword:{title:"새 비밀번호 설정",subtitle:"아래에 새 비밀번호를 입력하고 확인하세요.",newPassword:"새 비밀번호",newPasswordPlaceholder:"최소 8자",confirmPassword:"비밀번호 확인",confirmPasswordPlaceholder:"새 비밀번호 반복",saving:"저장 중…",submit:"새 비밀번호 설정",backToLogin:"로그인으로 돌아가기",passwordsDoNotMatch:"비밀번호가 일치하지 않습니다",passwordTooShort:"비밀번호는 최소 8자여야 합니다",resetFailed:"비밀번호 초기화 실패. 링크가 만료되었을 수 있습니다."},twoFA:{title:"이중 인증",subtitle:"계정이 2FA로 보호되어 있습니다. 아래에 인증 코드를 입력하세요.",methodAuthenticator:"인증 앱",methodEmail:"이메일 코드",methodBackup:"백업 코드",instructionsTotp:"인증 앱을 열고 Bambuddy의 6자리 코드를 입력하세요.",instructionsEmail:"이메일 주소로 6자리 코드가 전송되었습니다. 10분 후 만료됩니다.",instructionsEmailNotSent:"아래 버튼을 클릭하여 이메일로 인증 코드를 받으세요.",instructionsBackup:"8자리 백업 복구 코드 중 하나를 입력하세요. 각 코드는 한 번만 사용할 수 있습니다.",sendCodeButton:"이메일로 코드 전송",sendingCode:"전송 중...",resendCode:"코드 재전송",codeLabel:"인증 코드",backupCodeLabel:"백업 코드",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"확인",verifyingButton:"확인 중...",backToLogin:"← 로그인으로 돌아가기",orContinueWith:"또는 계속",signInWith:"{{provider}}로 로그인",enterCode:"인증 코드를 입력하세요",sendCodeFailed:"인증 코드 전송 실패",invalidCode:"잘못된 코드입니다. 다시 시도하세요."}},setup:{title:"Bambuddy 설정",subtitle:"Bambuddy 인스턴스의 인증을 설정하세요",enableAuth:"인증 활성화",adminAccount:"관리자 계정",adminAccountDesc:"관리자 사용자가 이미 있는 경우 기존 관리자 계정으로 인증이 활성화됩니다. 기존 관리자를 사용하려면 아래 필드를 비워두거나, 새 관리자 사용자를 만들려면 자격 증명을 입력하세요.",adminUsername:"관리자 사용자명",adminPassword:"관리자 비밀번호",optionalIfAdminExists:"(관리자 사용자가 있는 경우 선택사항)",adminUsernamePlaceholder:"관리자 사용자명 입력 (선택사항)",adminPasswordPlaceholder:"관리자 비밀번호 입력 (선택사항)",confirmPassword:"비밀번호 확인",confirmPasswordPlaceholder:"관리자 비밀번호 확인",settingUp:"설정 중...",completeSetup:"설정 완료",toast:{authEnabledAdminCreated:"인증 활성화 및 관리자 사용자 생성됨",authEnabledExistingAdmins:"기존 관리자 사용자로 인증 활성화됨",setupCompleted:"설정이 완료되었습니다",enterBothCredentials:"관리자 사용자명과 비밀번호를 모두 입력하거나, 기존 관리자 사용자를 사용하려면 둘 다 비워두세요",passwordsDoNotMatch:"비밀번호가 일치하지 않습니다",passwordTooShort:"비밀번호는 최소 6자여야 합니다"}},changePassword:{title:"비밀번호 변경",currentPassword:"현재 비밀번호",currentPasswordPlaceholder:"현재 비밀번호 입력",newPassword:"새 비밀번호",newPasswordPlaceholder:"새 비밀번호 입력 (최소 6자)",confirmPassword:"새 비밀번호 확인",confirmPasswordPlaceholder:"새 비밀번호 확인",passwordsDoNotMatch:"비밀번호가 일치하지 않습니다",passwordTooShort:"비밀번호는 최소 6자여야 합니다",changing:"변경 중...",success:"비밀번호가 성공적으로 변경되었습니다",failed:"비밀번호 변경 실패"},plateAlert:{title:"인쇄 일시정지됨!",message:"빌드 플레이트에 객체가 감지되었습니다. 인쇄가 자동으로 일시정지되었습니다. 플레이트를 비우고 인쇄를 재개하세요.",understand:"확인했습니다"},camera:{title:"카메라 보기",invalidPrinterId:"유효하지 않은 프린터 ID",live:"실시간",snapshot:"스냅샷",restartStream:"스트림 재시작",refreshSnapshot:"스냅샷 새로고침",fullscreen:"전체 화면",exitFullscreen:"전체 화면 종료",connectingToCamera:"카메라에 연결 중...",capturingSnapshot:"스냅샷 캡처 중...",connectionLost:"연결 끊김",connectionFailed:"카메라 연결 실패",reconnecting:"{{countdown}}초 후 재연결 중... (시도 {{attempt}}/{{max}})",reconnectNow:"지금 재연결",cameraUnavailable:"카메라를 사용할 수 없음",cameraUnavailableDesc:"프린터가 켜져 있고 연결되어 있는지 확인하세요.",noCamera:"사용 가능한 카메라 없음",retry:"다시 시도",cameraStream:"카메라 스트림",zoomOut:"축소",zoomIn:"확대",resetZoom:"배율 초기화",recording:"녹화 중",startRecording:"녹화 시작",stopRecording:"녹화 중지",chamberLight:"챔버 조명 전환",unavailable:"카메라 사용 불가",diagnose:{button:"진단",modalTitle:"카메라 진단",running:"진단 실행 중...",runFailed:"진단 실행 실패: {{error}}",retry:"다시 실행",stage:{tcp_reachable:"네트워크 연결 가능 여부",first_frame:"프레임 캡처",live_stream_active:"라이브 스트림 활성"},summary:{all_ok:"카메라가 정상 작동 중입니다. 모든 단계를 성공적으로 완료했습니다.",live_stream_active_healthy:"카메라가 최근 프레임으로 스트리밍 중입니다 — 테스트가 필요 없습니다.",printer_unreachable:"프린터에 연결할 수 없습니다. IP 주소, 네트워크 연결, 프린터 전원을 확인하세요.",camera_port_closed:"프린터에 연결됐지만 카메라 포트가 닫혀 있습니다. 프린터 설정에서 LAN 전용 모드와 개발자 모드가 활성화되어 있는지 확인하세요.",no_frame:"카메라에 연결됐지만 프레임이 수신되지 않았습니다. 다시 시도하거나 프린터 설정에서 카메라가 활성화되어 있는지 확인하세요.",unknown_failure:"알 수 없는 이유로 카메라 진단에 실패했습니다. 지원 로그를 확인하세요."},meta:{protocol:"프로토콜",port:"포트",profile:"프로파일"}}},groups:{title:"그룹 관리",subtitle:"접근 제어를 위한 권한 그룹 관리",backToSettings:"설정으로 돌아가기",createGroup:"그룹 생성",noPermission:"이 페이지에 접근할 권한이 없습니다.",system:"시스템",noDescription:"설명 없음",usersCount:"{{count}}명의 사용자",permissionsCount:"{{count}}개의 권한",edit:"편집",delete:"삭제",toast:{created:"그룹이 성공적으로 생성되었습니다",updated:"그룹이 성공적으로 업데이트되었습니다",deleted:"그룹이 성공적으로 삭제되었습니다",enterGroupName:"그룹 이름을 입력해 주세요"},modal:{editGroup:"그룹 편집",createGroup:"그룹 생성",cancel:"취소",saving:"저장 중...",creating:"생성 중...",saveChanges:"변경 사항 저장"},form:{groupName:"그룹 이름",groupNamePlaceholder:"그룹 이름 입력",systemGroupWarning:"시스템 그룹 이름은 변경할 수 없습니다",description:"설명",descriptionPlaceholder:"설명 입력 (선택사항)",permissions:"권한 ({{count}}개 선택됨)"},deleteModal:{title:"그룹 삭제",message:"이 그룹을 삭제하시겠습니까? 이 그룹의 사용자는 해당 권한을 잃게 됩니다.",confirm:"그룹 삭제"},editor:{title:"그룹 편집",createTitle:"그룹 생성",search:"권한 검색...",selectAll:"모두 선택",clearAll:"모두 해제",permissionsSelected:"{{count}}개 선택됨",noResults:"검색과 일치하는 권한이 없습니다"}},users:{title:"사용자 관리",subtitle:"Bambuddy 인스턴스에 대한 사용자 및 접근 권한 관리",backToSettings:"설정으로 돌아가기",createUser:"사용자 생성",noPermission:"이 페이지에 접근할 권한이 없습니다.",admin:"관리자",noGroups:"그룹 없음",active:"활성",inactive:"비활성",edit:"편집",delete:"삭제",system:"시스템",noGroupsAvailable:"사용 가능한 그룹 없음",table:{username:"사용자 이름",groups:"그룹",status:"상태",actions:"작업"},toast:{created:"사용자가 성공적으로 생성되었습니다",updated:"사용자가 성공적으로 업데이트되었습니다",deleted:"사용자가 성공적으로 삭제되었습니다",fillRequired:"모든 필수 항목을 입력해 주세요",passwordsDoNotMatch:"비밀번호가 일치하지 않습니다",passwordTooShort:"비밀번호는 최소 6자 이상이어야 합니다",ldapProvisioned:'LDAP 사용자 "{{username}}"이(가) 생성되었습니다'},modal:{createUser:"사용자 생성",editUser:"사용자 편집",cancel:"취소",creating:"생성 중...",saving:"저장 중...",saveChanges:"변경 사항 저장",advancedAuthSubtitle:"고급 인증 사용",tabsAriaLabel:"사용자 소스",localTab:"로컬",ldapTab:"LDAP",ldapSearchLabel:"디렉터리 검색",ldapSearchPlaceholder:"사용자명, 이름, 이메일을 입력하세요...",ldapMinChars:"검색하려면 최소 2자 이상 입력하세요",ldapTypeToSearch:"LDAP 디렉터리를 검색하려면 입력을 시작하세요",ldapSearching:"디렉터리 검색 중...",ldapNoResults:"디렉터리에서 일치하는 사용자가 없습니다",ldapSearchError:"디렉터리 검색에 실패했습니다. LDAP 서버 상태를 확인하세요.",ldapAlreadyProvisioned:"이미 생성됨",ldapSelectedLabel:"선택됨",ldapProvision:"사용자 생성",ldapProvisioning:"생성 중...",ldapErrorProvision:"생성에 실패했습니다. LDAP 서버 상태를 확인하고 다시 시도하세요."},form:{username:"사용자 이름",usernamePlaceholder:"사용자 이름 입력",email:"이메일",emailPlaceholder:"user@example.com",password:"비밀번호",passwordPlaceholder:"비밀번호 입력",confirmPassword:"비밀번호 확인",confirmPasswordPlaceholder:"비밀번호 확인",newPasswordPlaceholder:"새 비밀번호 입력",confirmNewPasswordPlaceholder:"새 비밀번호 확인",leaveBlankToKeep:"현재 비밀번호 유지 시 비워두기",groups:"그룹",optional:"선택사항",autoGeneratedPassword:"안전한 비밀번호가 자동으로 생성되어 사용자에게 이메일로 전송됩니다.",passwordManagedByAdvancedAuth:'비밀번호는 고급 인증에 의해 관리됩니다. "비밀번호 재설정"을 사용하여 이메일로 새 비밀번호를 전송하세요.',resetPassword:"비밀번호 재설정",resettingPassword:"비밀번호 재설정 중..."},deleteModal:{title:"사용자 삭제",message:"이 사용자를 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.",confirm:"사용자 삭제"}},streamOverlay:{title:"스트림 오버레이",invalidPrinterId:"유효하지 않은 프린터 ID",cameraStream:"카메라 스트림",progress:"진행률",eta:"예상 완료",printerIdle:"프린터 대기 중",printerOffline:"프린터 오프라인",status:{printing:"인쇄 중",paused:"일시 중지됨",finished:"완료됨",failed:"실패",idle:"대기 중",unknown:"알 수 없음"}},profiles:{title:"프로필",subtitle:"슬라이서 프리셋 및 압력 전진 보정 관리",tabs:{bambuCloud:"Bambu Cloud",orcaCloud:"Orca Cloud",local:"로컬 프로필",kprofiles:"K-프로필"},orcaCloud:{connectedAs:"연결됨",logout:"연결 해제",noLogoutPermission:"연결을 해제할 권한이 없습니다",noConnectPermission:"Orca Cloud에 연결할 권한이 없습니다",retry:"다시 시도",back:"다른 로그인 방법 사용",connect:{title:"Orca Cloud에 연결",description:"Orca Cloud 계정에 로그인하여 슬라이서 프로필을 Bambuddy에 동기화하세요."},providers:{google:"Google로 로그인",apple:"Apple로 로그인",github:"GitHub로 로그인",email:"이메일과 비밀번호로 로그인"},password:{title:"이메일과 비밀번호로 로그인",email:"이메일",emailPlaceholder:"you@example.com",password:"비밀번호",submit:"로그인"},paste:{title:"로그인 완료",step1:"새 탭에서 Orca Cloud 로그인 페이지가 열렸습니다. Orca 계정으로 로그인하세요.",step2:'브라우저가 로드되지 않는 "localhost" URL로 리디렉션됩니다. 이것은 정상입니다 — 우리에게 필요한 것은 그 URL입니다.',step3:"브라우저의 주소 표시줄에서 전체 URL을 복사하여 아래에 붙여넣으세요.",signInUrl:"로그인 탭이 열리지 않은 경우 이 URL을 클릭하세요:",label:"여기에 콜백 URL 붙여넣기",placeholder:"http://localhost:41172/callback?code=...&state=...",submit:"연결 완료"},profiles:{title:"Orca Cloud 프로필 ({{count}})",refresh:"새로고침",empty:"Orca Cloud 계정에 아직 프로필이 없습니다."},toast:{connected:"{{email}}로 Orca Cloud에 연결됨",disconnected:"Orca Cloud 연결 해제됨"},errors:{startFailed:"Orca Cloud 로그인 흐름을 시작할 수 없습니다.",finishFailed:"Orca Cloud 로그인을 완료할 수 없습니다.",passwordFailed:"해당 이메일과 비밀번호로 로그인할 수 없습니다.",passwordEmpty:"이메일과 비밀번호를 모두 입력하세요.",emptyPaste:"브라우저에서 콜백 URL을 붙여넣으세요.",noCode:"해당 URL은 Orca Cloud 콜백이 아닌 것 같습니다 (code 매개변수 없음). 주소 표시줄에서 전체 URL을 복사하세요."}},localProfiles:{title:"로컬 프로필",subtitle:"OrcaSlicer에서 슬라이서 프리셋 가져오기 및 관리",import:"프로필 가져오기",importDesc:".bbscfg, .bbsflmt, .orca_filament, .zip 또는 .json 파일을 여기에 드롭하세요",importing:"가져오는 중...",search:"로컬 프리셋 검색...",noPresets:"로컬 프리셋 없음",badge:"로컬",edit:"편집",delete:"삭제",cancel:"취소",deleteConfirmTitle:"프리셋 삭제",deleteConfirm:"이 프리셋을 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.",source:"출처",inheritsFrom:"상속",filamentType:"유형",vendor:"제조사",compatiblePrinters:"프린터",nozzleTemp:"노즐 온도",cost:"비용",density:"밀도",pressureAdvance:"압력 전진",filament:"필라멘트",process:"프로세스",printer:"프린터",toast:{importSuccess:"{{count}}개 프리셋 가져옴",importSkipped:"{{count}}개 프리셋 건너뜀 (중복)",importError:"가져오기 중 {{count}}개 오류 발생",deleted:"프리셋 삭제됨",updated:"프리셋 업데이트됨"},noSearchResults:"검색어와 일치하는 프리셋이 없습니다"},connectedAs:"연결된 계정",logout:"로그아웃",noLogoutPermission:"로그아웃 권한이 없습니다",failedToLoad:"프로필 불러오기 실패",retry:"다시 시도",time:{justNow:"방금",minsAgo:"{{count}}분 전",hoursAgo:"{{count}}시간 전",daysAgo:"{{count}}일 전"},toast:{loggedOut:"로그아웃되었습니다"},login:{title:"Bambu 클라우드 연결",subtitle:"기기 간 슬라이서 프리셋 동기화",email:"이메일",password:"비밀번호",region:"지역",regionGlobal:"글로벌",regionChina:"중국",verificationCode:"인증 코드",totpCode:"인증앱 코드",checkEmail:"이메일({{email}})로 전송된 6자리 코드를 확인하세요",enterTotpHint:"인증앱에서 6자리 코드를 입력하세요",accessToken:"액세스 토큰",accessTokenHint:"Bambu Studio에서 Bambu Lab 액세스 토큰을 붙여넣으세요",back:"뒤로",loginButton:"로그인",verifyButton:"인증",setTokenButton:"토큰 설정",useToken:"액세스 토큰 대신 사용",useEmail:"이메일로 로그인",toast:{loggedIn:"성공적으로 로그인되었습니다",codeSent:"이메일로 인증 코드가 전송되었습니다",enterTotp:"인증앱에서 코드를 입력하세요",tokenSet:"토큰이 성공적으로 설정되었습니다"}},presets:{myPreset:"내 프리셋 (편집 가능)",duplicate:"복제",editable:"편집 가능",failedToLoadDetails:"프리셋 세부 정보 불러오기 실패",deleteConfirm:"이 프리셋을 삭제하시겠습니까?",deleteWarning:'Bambu 클라우드에서 "{{name}}"을(를) 영구적으로 삭제합니다. 이 작업은 취소할 수 없습니다.',noDuplicatePermission:"프리셋 복제 권한이 없습니다",noEditPermission:"프리셋 편집 권한이 없습니다",noDeletePermission:"프리셋 삭제 권한이 없습니다",types:{filament:"필라멘트 프리셋",printer:"프린터 프리셋",process:"프로세스 프리셋"},toast:{deleted:"프리셋 삭제됨",created:"프리셋 생성됨",updated:"프리셋 업데이트됨",duplicated:"프리셋 복제됨",fieldAdded:'"{{key}}" 필드 추가됨',exported:"프리셋 내보냄"},baseLabel:"기본: {{name}}",currentLabel:"현재: {{name}}",newPreset:"새 프리셋",editPreset:"프리셋 편집",duplicatePreset:"프리셋 복제",createNewPreset:"새 프리셋 생성",customizeSettings:"새 프리셋의 설정 사용자 지정",compareWithBase:"기본 프리셋과 비교",compare:"비교",basePreset:"기본 프리셋",selectBasePreset:"기본 프리셋 선택...",presetName:"프리셋 이름",myCustomPreset:"내 사용자 지정 프리셋",inheritsFrom:"상속 출처",dropJsonToImport:"JSON 파일을 드롭하여 가져오기",tabs:{common:"공통",allFields:"모든 필드"},availableFields:"사용 가능한 필드",searchFieldsPlaceholder:"필드 검색...",noMatchingFields:"일치하는 필드 없음",allFieldsAdded:"모든 필드 추가됨",addCustomField:"사용자 지정 필드 추가",yourOverrides:"내 재정의",noOverridesYet:"아직 재정의 없음",clickFieldsToAdd:"왼쪽 필드를 클릭하여 추가",saveAsTemplate:"템플릿으로 저장",jsonTip:"팁: 이 모달 어디서나 .json 파일을 드래그 앤 드롭하여 설정을 가져올 수 있습니다"},cloudView:{searchPlaceholder:"프리셋 검색...",templates:"템플릿",refresh:"새로고침",newPreset:"새 프리셋",clearFilters:"필터 초기화",compareMode:"비교 모드",selectAnotherPreset:"다른 {{type}} 프리셋 선택",clickTwoPresets:"같은 유형의 프리셋 두 개를 클릭하여 비교",selectFirst:"1. 첫 번째 선택",selectSecond:"2. 두 번째 선택",compareNow:"지금 비교",lastSynced:"마지막 동기화:",showingCount:"{{total}}개 중 {{showing}}개 표시",noPresetsFound:"프리셋을 찾을 수 없음",columns:{filament:"필라멘트",process:"프로세스",printer:"프린터"},noFilamentPresets:"필라멘트 프리셋 없음",noProcessPresets:"프로세스 프리셋 없음",noPrinterPresets:"프린터 프리셋 없음",filters:{type:"유형",owner:"소유자",printer:"프린터",nozzle:"노즐",filament:"필라멘트",layer:"레이어",all:"전체",myPresets:"내 프리셋",builtIn:"기본 제공",process:"프로세스"},noTemplatesPermission:"템플릿 관리 권한이 없습니다",noRefreshPermission:"프로필 새로고침 권한이 없습니다",noCreatePermission:"프리셋 생성 권한이 없습니다"},templates:{title:"빠른 템플릿",noTemplates:"아직 템플릿 없음",createFirst:"프리셋 편집기에서 템플릿을 생성하세요",typeFilter:"유형:",deleteTitle:"템플릿 삭제",deleteWarning:"이 작업은 취소할 수 없습니다",deleteConfirm:'"{{name}}"을(를) 삭제하시겠습니까?',namePlaceholder:"템플릿 이름",descriptionPlaceholder:"설명",settingsJson:"설정 (JSON)",fieldsCount:"{{count}}개 필드",shownInModals:"모달에 표시됨",hiddenInModals:"모달에서 숨겨짐",apply:"적용",toast:{deleted:"템플릿 삭제됨",updated:"템플릿 업데이트됨",created:"템플릿 생성됨",applied:"템플릿 적용됨"}}},support:{debugLoggingActive:"디버그 로깅이 활성화되어 있습니다",manageLogs:"관리",collectItem7:"프린터 연결 및 펌웨어 버전",collectItem8:"통합 상태 (Spoolman, MQTT, HA)",collectItem9:"네트워크 인터페이스 (서브넷만)",collectItem10:"Python 패키지 버전",collectItem11:"데이터베이스 상태 확인",collectItem12:"Docker 환경 세부 정보",bundleGenerating:"번들 생성 중...",bundleStepConnection:"프린터 연결 확인 실행 중",bundleStepVirtualPrinters:"가상 프린터 설정 확인 실행 중",bundleStepLogScan:"알려진 문제가 있는지 최근 로그 스캔 중",bundleStepBuild:"지원 번들 ZIP 빌드 중"},fileManager:{title:"파일 관리자",subtitle:"인쇄 파일 정리 및 관리",uploadFiles:"파일 업로드",newFolder:"새 폴더",folderName:"폴더 이름",folderNamePlaceholder:"예: 기능성 부품",renameFile:"파일 이름 바꾸기",renameFolder:"폴더 이름 바꾸기",invalidFilenameChar:'"{{char}}" 문자는 인쇄 파일 이름에 허용되지 않습니다. 프린터 SD 카드가 거부하는 문자: < > : " / \\ | ? *',moveFiles:"{{count}}개 파일 이동",rootNoFolder:"루트 (폴더 없음)",current:"현재",linkFolder:"폴더 연결",linkFolderDescription:'"{{name}}"을(를) 프로젝트 또는 아카이브에 연결하여 빠른 접근.',project:"프로젝트",archive:"아카이브",noProjectsFound:"프로젝트를 찾을 수 없음",noArchivesFound:"아카이브를 찾을 수 없음",unlink:"연결 해제",link:"연결",dragDropFiles:"파일을 여기에 드래그 앤 드롭",dropFilesHere:"파일을 여기에 드롭",orClickToBrowse:"또는 클릭하여 탐색",allFileTypesSupported:"모든 파일 형식 지원. ZIP 파일은 압축 해제됩니다.",zipFilesDetected:"ZIP 파일 감지됨",zipExtractOptions:"ZIP 파일이 압축 해제됩니다. 폴더 구조 처리 방법을 선택하세요:",preserveZipStructure:"ZIP에서 폴더 구조 유지",createFolderFromZip:"ZIP 파일 이름으로 폴더 생성",stlThumbnailGeneration:"STL 썸네일 생성",zipMayContainStl:"ZIP 파일에 STL 파일이 포함될 수 있습니다. 압축 해제 중 썸네일을 생성할 수 있습니다.",thumbnailsCanBeGenerated:"STL 파일의 썸네일을 생성할 수 있습니다. 대형 모델은 처리 시간이 더 걸릴 수 있습니다.",generateThumbnailsForStl:"STL 파일의 썸네일 생성",threemfDetected:"3MF 파일 감지됨",threemfExtractionInfo:"프린터 모델, 재료, 색상 및 인쇄 설정이 3MF 파일에서 자동으로 추출됩니다.",willBeExtracted:"추출 예정",filesExtracted:"{{count}}개 파일 추출됨",uploadComplete:"업로드 완료: {{succeeded}}개 성공",uploadFailed:"업로드 실패",zipFilesFailed:"{{count}}개 파일 실패",uploading:"업로드 중...",changeLink:"링크 변경...",linkTo:"연결 대상...",linkToProjectOrArchive:"프로젝트 또는 아카이브에 연결",addToQueue:"대기열에 추가",schedulePrint:"예약",generateThumbnail:"썸네일 생성",generateThumbnails:"썸네일 생성",generateThumbnailsForMissing:"썸네일이 없는 STL 파일의 썸네일 생성",gridView:"격자 보기",listView:"목록 보기",lowDiskSpaceWarning:"디스크 공간 부족 경고",lowDiskSpaceDetails:"전체 {{total}} 중 {{free}}만 남음. 임계값은 설정에서 {{threshold}}GB로 설정됩니다.",files:"파일",folders:"폴더",size:"크기",free:"여유",allFiles:"모든 파일",allExternal:"외부",externalIsEmpty:"외부 파일 없음",externalEmptyDescription:"연결된 외부 폴더의 파일이 여기에 표시됩니다.",wrap:"줄 바꿈",enableTextWrapping:"텍스트 줄 바꿈 활성화",disableTextWrapping:"텍스트 줄 바꿈 비활성화",collapse:"접기",collapseFoldersByDefault:"기본적으로 폴더 접기",expandFoldersByDefault:"기본적으로 폴더 펼치기",dragToResizeTooltip:"드래그하여 크기 조정, 더블클릭하여 초기화",searchFiles:"파일 검색...",allTypes:"모든 유형",prints:"인쇄물",ascending:"오름차순",descending:"내림차순",resultsCount:"전체 {{total}}개 중 {{showing}}개",selectAll:"모두 선택",deselectAll:"모두 선택 해제",selected:"{{count}}개 선택됨",adding:"추가 중...",loadingFiles:"파일 불러오는 중...",folderIsEmpty:"폴더가 비어 있음",noFilesYet:"파일 없음",folderEmptyDescription:"파일을 업로드하거나 이 폴더로 이동하여 시작하세요.",noFilesDescription:"파일을 업로드하여 인쇄 관련 파일을 정리하세요.",noMatchingFiles:"일치하는 파일 없음",noMatchingFilesDescription:"현재 검색 또는 필터 조건과 일치하는 파일이 없습니다.",clearFilters:"필터 초기화",printedCount:"{{count}}회 인쇄됨",uploadedBy:"업로드한 사람",deleteFolder:"폴더 삭제",deleteFile:"파일 삭제",deleteFilesCount:"{{count}}개 파일 삭제",deleteFolderConfirm:"이 폴더를 삭제하시겠습니까? 안의 모든 파일도 삭제됩니다.",deleteFileConfirm:"이 파일을 삭제하시겠습니까?",deleteFilesConfirm:"선택한 {{count}}개 파일을 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.",deleting:"삭제 중...",noPermissionRenameFolder:"폴더 이름 변경 권한이 없습니다",noPermissionLinkFolder:"폴더 연결 권한이 없습니다",noPermissionDeleteFolder:"폴더 삭제 권한이 없습니다",noPermissionPrint:"인쇄 권한이 없습니다",noPermissionAddToQueue:"대기열 추가 권한이 없습니다",noPermissionSlice:"파일 슬라이싱 권한이 없습니다",noPermissionDownload:"파일 다운로드 권한이 없습니다",noPermissionRenameFile:"파일 이름 변경 권한이 없습니다",noPermissionGenerateThumbnail:"썸네일 생성 권한이 없습니다",noPermissionDeleteFile:"파일 삭제 권한이 없습니다",noPermissionCreateFolder:"폴더 생성 권한이 없습니다",noPermissionUpload:"파일 업로드 권한이 없습니다",noPermissionMoveFiles:"파일 이동 권한이 없습니다",noPermissionDeleteFiles:"파일 삭제 권한이 없습니다",linkExternal:"외부 연결",linkExternalFolder:"외부 폴더 연결",linkExternalFolderDescription:"호스트 디렉토리(NAS, USB, 네트워크 공유)를 파일 관리자에 마운트합니다. 파일은 복사되지 않고 원래 경로에서 직접 접근합니다.",externalFolderNamePlaceholder:"예: NAS 인쇄물",externalPath:"호스트 경로",externalPathHelp:"Docker 호스트의 디렉토리 절대 경로. 컨테이너에 바인드 마운트되어야 합니다.",readOnly:"읽기 전용",readOnlyHelp:"업로드 및 삭제 방지",showHiddenFiles:"숨김 파일 표시 (dotfiles)",externalFolder:"외부 폴더",scanFolder:"스캔",toast:{folderCreated:"폴더 생성됨",folderDeleted:"폴더 삭제됨",fileDeleted:"파일 삭제됨",filesDeleted:"{{count}}개 파일 삭제됨",filesMoved:"파일 이동됨",folderLinked:"폴더 연결됨",folderUnlinked:"폴더 연결 해제됨",externalFolderLinked:"외부 폴더 연결 및 스캔됨",folderScanned:"스캔 완료: {{added}}개 추가, {{removed}}개 제거",addedToQueue:"{{count}}개 파일을 대기열에 추가함",addedToQueuePartial:"{{added}}개 추가됨, {{failed}}개 실패",failedToAddToQueue:"파일 추가 실패: {{error}}",fileRenamed:"파일 이름 변경됨",folderRenamed:"폴더 이름 변경됨",thumbnailsGenerated:"{{count}}개 썸네일 생성됨",thumbnailsGeneratedPartial:"{{succeeded}}개 썸네일 생성됨, {{failed}}개 실패",noStlMissingThumbnails:"썸네일이 없는 STL 파일 없음",failedToGenerateThumbnails:"썸네일 생성 실패: {{error}}",thumbnailGenerated:"썸네일 생성됨",failedToGenerateThumbnail:"썸네일 생성 실패: {{error}}"}},projects:{title:"프로젝트",subtitle:"3D 인쇄 프로젝트 정리 및 추적",newProject:"새 프로젝트",editProject:"프로젝트 편집",deleteProject:"프로젝트 삭제",projectName:"프로젝트 이름",description:"설명",noProjects:"프로젝트 없음",noProjectsFiltered:"{{status}} 프로젝트 없음",noProjectsFilteredHelp:"{{status}} 프로젝트가 없습니다. 상태가 변경되면 여기에 표시됩니다.",createFirst:"첫 번째 프로젝트를 만들어 관련 인쇄물을 정리하고 진행 상황을 추적하며 빌드를 관리하세요.",createFirstButton:"첫 번째 프로젝트 만들기",create:"만들기",files:"파일",prints:"인쇄물",plates:"플레이트",parts:"부품",lastModified:"마지막 수정",deleteConfirm:"이 프로젝트를 삭제하시겠습니까? 아카이브 및 대기열 항목은 연결 해제되지만 삭제되지는 않습니다.",addFiles:"파일 추가",removeFile:"파일 제거",viewDetails:"세부 정보 보기",namePlaceholder:"예: Voron 2.4 빌드",descriptionPlaceholder:"선택적 설명...",urlLabel:"URL",urlPlaceholder:"https://makerworld.com/...",urlInvalid:"URL은 http:// 또는 https://로 시작해야 합니다",openExternalUrl:"프로젝트 URL 열기",coverImageLabel:"커버 사진",coverImageAlt:"프로젝트 커버 사진",coverImageUpload:"업로드",coverImageReplace:"교체",coverImageRemove:"제거",color:"색상",targetPlates:"목표 플레이트",targetPlatesPlaceholder:"예: 25",targetPlatesHelp:"인쇄 작업 수",targetParts:"목표 부품",targetPartsPlaceholder:"예: 150",targetPartsHelp:"필요한 총 개체 수",tagsLabel:"태그 (쉼표로 구분)",tagsPlaceholder:"예: voron, 기능성, 선물",dueDate:"마감일",priority:"우선순위",priorityLow:"낮음",priorityNormal:"보통",priorityHigh:"높음",priorityUrgent:"긴급",statusActive:"활성",statusCompleted:"완료됨",statusArchived:"보관됨",done:"완료",completed:"완료됨",failed:"실패",inQueue:"대기 중",noPrintsYet:"인쇄물 없음",printJobs:"인쇄 작업 (플레이트)",partsPrinted:"인쇄된 부품",failedParts:"실패한 부품",import:"가져오기",export:"내보내기",importProject:"프로젝트 가져오기",exportAll:"모든 프로젝트 내보내기",loading:"프로젝트 불러오는 중...",noEditPermission:"프로젝트 편집 권한이 없습니다",noDeletePermission:"프로젝트 삭제 권한이 없습니다",noCreatePermission:"프로젝트 생성 권한이 없습니다",noImportPermission:"프로젝트 가져오기 권한이 없습니다",noExportPermission:"프로젝트 내보내기 권한이 없습니다",toast:{created:"프로젝트 생성됨",updated:"프로젝트 업데이트됨",deleted:"프로젝트 삭제됨",imported:"프로젝트 가져옴",multipleImported:"{{count}}개 프로젝트 가져옴",importFailed:"가져오기 실패",exported:"프로젝트 내보냄 (메타데이터만)"}},projectDetail:{notFound:"프로젝트를 찾을 수 없음",backToProjects:"프로젝트로 돌아가기",export:"내보내기",exportProject:"프로젝트 내보내기",noExportPermission:"프로젝트 내보내기 권한이 없습니다",noEditPermission:"프로젝트 편집 권한이 없습니다",partOf:"속한 프로젝트:",priorityLabel:"우선순위:",noPrints:"이 프로젝트에 아직 인쇄물이 없습니다",status:{active:"활성",completed:"완료됨",archived:"보관됨"},priority:{low:"낮음",normal:"보통",high:"높음",urgent:"긴급"},dueDate:{overdue:"기한 초과",today:"오늘 마감",daysLeft:"{{count}}일 남음"},progress:{platesProgress:"플레이트 진행률",partsProgress:"부품 진행률",printJobs:"인쇄 작업",parts:"부품",percentComplete:"{{percent}}% 완료",remaining:"{{count}}개 남음"},stats:{printJobs:"인쇄 작업",total:"합계",failed:"{{count}}개 실패",partsPrinted:"{{count}}개 부품 인쇄됨",printTime:"인쇄 시간",filamentUsed:"사용된 필라멘트"},cost:{title:"비용 추적",filamentCost:"필라멘트 비용",energy:"에너지",totalCost:"총 비용",total:"합계",includesBom:"BOM 포함",budget:"예산",remaining:"남은 예산"},subProjects:{title:"하위 프로젝트 ({{count}})"},notes:{title:"메모",noEditPermission:"메모 편집 권한이 없습니다",placeholder:"이 프로젝트에 대한 메모 추가...",empty:"아직 메모가 없습니다. 편집을 클릭하여 메모를 추가하세요."},files:{title:"파일",linkFolders:"파일 관리자에서 폴더 연결",forQuickAccess:"빠른 접근을 위해 이 프로젝트에 연결합니다.",fileCount:"{{count}}개 파일",empty:"연결된 폴더가 없습니다. 파일 관리자로 이동하여 폴더를 이 프로젝트에 연결하세요.",noFiles:"이 폴더에 파일이 없습니다.",print:"지금 인쇄",addToQueue:"대기열에 추가"},bom:{title:"부품 목록",acquired:"{{total}}개 중 {{completed}}개 확보",showAll:"전체 표시",hideDone:"완료된 것 숨기기",addPart:"부품 추가",noAddPermission:"부품 추가 권한이 없습니다",partNamePlaceholder:"부품 이름 (예: M3x8 나사)",partName:"부품 이름",qty:"수량",price:"가격 ({{currency}})",sourcingUrlPlaceholder:"구매 URL (선택사항)",remarksPlaceholder:"비고 (선택사항)",deletePart:"부품 삭제",deleteConfirm:'"{{name}}"을(를) 삭제하시겠습니까?',noUpdatePermission:"부품 업데이트 권한이 없습니다",noEditPermission:"부품 편집 권한이 없습니다",noDeletePermission:"부품 삭제 권한이 없습니다",totalCost:"총 비용:",empty:"부품 목록에 부품이 없습니다. 하드웨어, 전자 부품 또는 기타 구성품을 추가하여 조달이 필요한 것을 추적하세요."},timeline:{title:"활동 타임라인",empty:"아직 활동이 없습니다."},template:{saveAsTemplate:"템플릿으로 저장",noCreatePermission:"템플릿 생성 권한이 없습니다"},queue:{title:"대기열",viewAll:"전체 보기",printing:"{{count}}개 인쇄 중",queued:"{{count}}개 대기 중"},prints:{title:"인쇄물 ({{count}})"},toast:{projectUpdated:"프로젝트 업데이트됨",partAdded:"부품 추가됨",partRemoved:"부품 제거됨",exportFailed:"내보내기 실패",projectExported:"프로젝트 내보냄",templateCreated:"템플릿 생성됨"}},system:{title:"시스템 정보",version:"버전",uptime:"가동 시간",cpuUsage:"CPU 사용량",memoryUsage:"메모리 사용량",diskUsage:"디스크 사용량",networkInfo:"네트워크 정보",logs:"로그",debugMode:"디버그 모드",enableDebug:"디버그 로깅 활성화",disableDebug:"디버그 로깅 비활성화",downloadLogs:"로그 다운로드",clearLogs:"로그 초기화",dockerInfo:"Docker 정보",containerName:"컨테이너 이름",imageName:"이미지 이름",platform:"플랫폼",architecture:"아키텍처"},library:{title:"필라멘트 라이브러리",addFilament:"필라멘트 추가",editFilament:"필라멘트 편집",deleteFilament:"필라멘트 삭제",vendor:"제조사",material:"재료",color:"색상",kFactor:"K 계수",temperature:"온도",noFilaments:"라이브러리에 필라멘트 없음",deleteConfirm:"이 필라멘트를 삭제하시겠습니까?",importFromPrinter:"프린터에서 가져오기",exportToFile:"파일로 내보내기"},slice:{title:"모델 슬라이싱",action:"슬라이싱",slicing:"슬라이싱 중…",printer:"프린터 프로필",process:"프로세스 프로필",filament:"필라멘트 프로필",filamentSlot:"필라멘트 {{index}} ({{type}})",selectPreset:"— 프리셋 선택 —",loadingPresets:"프리셋 불러오는 중…",analyzingPlateFilaments:"플레이트 필라멘트 분석 중…",analyzingPlateFilamentsHint:"이 플레이트가 사용하는 AMS 슬롯을 확인하기 위해 미리보기 슬라이싱을 실행합니다. 캐시 후에는 재오픈이 즉각적입니다.",previewToast:"{{name}} 분석 중 — {{elapsed}}",previewWithProgress:"{{name}} 분석 중 — {{stage}} ({{percent}}%) — {{elapsed}}",notUsedByPlate:"— 이 플레이트에서 사용되지 않음",noPresetsForSlot:"사용 가능한 프리셋 없음",presetsLoadFailed:"프리셋 불러오기 실패. 먼저 설정 → 프로필에서 가져오세요.",refreshPresets:"새로 고침",refreshPresetsTitle:"프리셋 새로 고침 — 최신 클라우드 및 번들 목록 가져오기 (Bambu Studio 또는 Bambu Handy에서 프리셋 삭제 후 사용)",allPresetsRequired:"모든 프리셋을 선택해야 합니다",enqueuing:"슬라이싱 작업 제출 중…",queued:"대기 중…",failed:"슬라이싱 실패. 슬라이서 사이드카 로그를 확인하세요.",startedToast:"백그라운드에서 {{name}} 슬라이싱 중…",queuedToast:"대기 중: {{name}} — {{elapsed}}",runningToast:"{{name}} 슬라이싱 중 — {{elapsed}}",runningWithProgress:"{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",completedToast:"{{name}} 슬라이싱 완료",failedToast:"{{name}} 슬라이싱 실패: {{detail}}",tier:{local:"가져온 것",cloud:"Bambu Cloud",orcaCloud:"Orca Cloud",standard:"표준"},cloud:{notAuthenticated:"클라우드 프리셋을 보려면 Bambu Cloud에 로그인하세요 (설정 → 프로필 → Bambu Cloud).",expired:"Bambu Cloud 세션이 만료되었습니다 — 다시 로그인하여 클라우드 프리셋을 새로고침하세요.",unreachable:"현재 Bambu Cloud에 연결할 수 없습니다. 로컬 및 표준 프리셋은 계속 작동합니다."},orcaCloud:{notAuthenticated:"Orca 프리셋을 보려면 Orca Cloud (프로필 → Orca Cloud)에 로그인하세요.",expired:"Orca Cloud 세션이 만료되었습니다 — Orca 프리셋을 새로고침하려면 다시 로그인하세요.",unreachable:"Orca Cloud에 현재 연결할 수 없습니다. 다른 프리셋은 계속 작동합니다."},actionAll:"{{count}}개 플레이트 모두 슬라이싱",actionAllTitle:"모든 플레이트를 단일 다중 플레이트 출력으로 슬라이싱합니다 (단일 아카이브). 필라멘트 선택은 프로젝트가 정의하는 모든 슬롯을 포함합니다.",allPlatesToggle:"{{count}}개 플레이트 모두 슬라이싱",otherPrinters:"다른 프린터",bundle:"슬라이서 번들",bundleNone:"— 없음 (개별로 프리셋 선택) —",bundleAllRequired:"번들 프로세스 및 모든 필라멘트 슬롯을 선택해야 합니다",runningWithProgressMultiPlate:"플레이트 {{plateIndex}}/{{plateCount}} • {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",failedTitle:"슬라이싱 실패",bedType:{label:"빌드 플레이트",auto:"자동 (프로세스 프리셋 사용)",coolPlate:"쿨 플레이트",coolPlateSuperTack:"쿨 플레이트 슈퍼택",engineering:"엔지니어링 플레이트",highTemp:"고온 플레이트",texturedPEI:"텍스처 PEI 플레이트",smoothPEI:"매끄러운 PEI 플레이트"}},spoolman:{title:"Spoolman 통합",enabled:"Spoolman 활성화됨",url:"Spoolman URL",connected:"연결됨",disconnected:"연결되지 않음",testConnection:"연결 테스트",sync:"동기화",syncing:"동기화 중...",lastSync:"마지막 동기화",linkToSpoolman:"Spoolman에 연결",openInSpoolman:"Spoolman에서 열기",unlinkSpool:"스풀 연결 해제",unlinkConfirmTitle:"스풀 할당 해제?",unlinkConfirmMessage:"이 슬롯에서 스풀을 제거합니다. 스풀 데이터 자체는 변경되지 않습니다.",selectSpool:"스풀 선택",noUnlinkedSpools:"할당되지 않은 스풀 없음",linkSuccess:"스풀이 성공적으로 할당되었습니다",linkFailed:"스풀 할당 실패",unlinkSuccess:"스풀이 성공적으로 할당 해제되었습니다",unlinkFailed:"스풀 할당 해제 실패",linkedSpool:"할당된 스풀",spoolId:"스풀 ID",fillSourceLabel:"(Spoolman)",weight:"무게",remaining:"남은 양",disableWeightSync:"AMS 예상 무게 동기화 비활성화",disableWeightSyncDesc:"AMS 추정치에서 남은 용량을 업데이트하지 않습니다. AMS 백분율 기반 추정 대신 Spoolman의 사용량 추적을 선호하는 경우 사용하세요. 새 스풀은 여전히 AMS 추정치를 초기 무게로 사용합니다.",reportPartialUsage:"실패한 인쇄물에 대한 부분 사용량 보고",reportPartialUsageDesc:"인쇄가 실패하거나 취소될 때 레이어 진행률을 기반으로 해당 시점까지 사용된 예상 필라멘트를 보고합니다."},inventory:{title:"스풀 재고",spoolmanMixedContentTitle:"HTTPS에서 Spoolman을 불러올 수 없음 — 브라우저가 혼합 콘텐츠를 차단함",spoolmanMixedContentBody:"Bambuddy가 HTTPS로 서비스되고 있지만 Spoolman URL은 여전히 HTTP입니다. 브라우저는 보안상 혼합 콘텐츠를 차단하므로 내장된 Spoolman UI가 렌더링되지 않습니다. 이 기능이 작동하려면 Spoolman이 HTTPS로 접근 가능해야 합니다.",spoolmanMixedContentFixReverseProxy:"Spoolman을 Bambuddy와 같은 리버스 프록시(Traefik / Nginx / Caddy) 뒤에 HTTPS로 배치한 다음 설정에서 Spoolman URL을 새 HTTPS 주소로 업데이트하세요.",spoolmanMixedContentFixOpenNewTab:"임시 방편으로 HTTP로 새 브라우저 탭에서 Spoolman을 여세요 — 혼합 콘텐츠 규칙은 내장 프레임에만 적용되므로 독립 탭은 여전히 작동합니다.",spoolmanOpenInNewTab:"새 탭에서 Spoolman 열기",labels:{title:"스풀 라벨 인쇄",selectedCount:"{{count}}개 선택됨",pickSpools:"라벨을 인쇄할 스풀 선택:",searchPlaceholder:"이름, 브랜드 또는 #ID 검색",filterByMaterial:"재료:",allMaterials:"전체",selectVisible:"보이는 모든 항목 선택 ({{count}})",deselectVisible:"보이는 항목 선택 해제",clearAll:"모두 초기화",noSpoolsToShow:"표시할 스풀이 없습니다. 필터를 조정하고 다시 시도하세요.",noMatches:"현재 검색 또는 필터와 일치하는 스풀이 없습니다.",printOne:"이 스풀의 라벨 인쇄",printLabels:"라벨 인쇄…",bulkTitle:"현재 표시된 {{count}}개에서 라벨을 인쇄할 스풀 선택",noSpoolsTitle:"라벨을 붙일 스풀 없음",error:"라벨을 생성할 수 없습니다: {{msg}}",templates:{box40x30:{label:"박스 라벨 (40 × 30 mm)",hint:"페이지당 단일 라벨; 일반 DK/Brother 롤 크기, 필라멘트 가방 및 보관함 라벨에 적합."},box:{label:"박스 라벨 (62 × 29 mm)",hint:"페이지당 단일 라벨; Brother PT/QL 및 Dymo 소형 라벨에 맞는 크기."},averyL7160:{label:"Avery L7160 — A4 시트 (38.1 × 63.5 mm × 21)",hint:"EU 시트; A4 페이지당 21개 라벨."},avery5160:{label:"Avery 5160 — US Letter 시트 (25.4 × 66.7 mm × 30)",hint:"US 시트; Letter 페이지당 30개 라벨."},amsHolderSmall:{label:"AMS 홀더 — 소형 (74 × 33 mm)",hint:"페이지당 단일 레이블; MakerWorld 모델 752566 (AMS 필라멘트 레이블 홀더)의 인쇄 가능 레이블과 일치합니다."},amsHolderLarge:{label:"AMS 홀더 — 대형 (75 × 55 mm)",hint:"페이지당 단일 레이블; AMS 필라멘트 레이블 홀더의 카드스톡 삽입 변형에 맞습니다. 스와치, 브랜드, 재질, ID, QR 코드에 충분한 공간이 있습니다."}},sortBy:{label:"정렬:",id:"ID 순",color:"색상 순"}},addSpool:"스풀 추가",editSpool:"스풀 편집",copySpool:"스풀 복사",material:"재료",selectMaterial:"재료 선택...",subtype:"하위 유형",brand:"브랜드",searchBrand:"브랜드 검색...",useCustomBrand:'"{{brand}}" 사용',useCustomMaterial:"사용자 지정 재료 사용: {{material}}",colorName:"색상 이름",colorNamePlaceholder:"제이드 화이트, 파이어 레드...",color:"색상",hexColor:"16진수 색상",pickColor:"사용자 지정 색상 선택",labelWeight:"라벨 무게",coreWeight:"빈 스풀 무게",searchSpoolWeight:"스풀 무게 검색...",weightUsed:"사용됨",currentWeight:"남은 무게",measuredWeight:"측정된 무게",spoolName:"스풀",costPerKg:"kg당 비용",storageLocation:"보관 위치",storageLocationPlaceholder:"예: 선반 A, 서랍 1",openInInventory:"재고에서 열기",measuredWeightError:"측정된 무게는 {{min}}g과 {{max}}g 사이여야 합니다.",slicerFilament:"슬라이서 필라멘트",slicerFilamentName:"슬라이서 프리셋 이름",slicerPreset:"슬라이서 프리셋",searchPresets:"필라멘트 프리셋 검색...",selectedPreset:"선택됨",noPresetsFound:"프리셋을 찾을 수 없음",tempOverrides:"온도 재정의",note:"메모",notePlaceholder:"이 스풀에 대한 추가 메모...",category:"카테고리",categoryPlaceholder:"예: 생산, 프로토타입, 고객 A",categoryNone:"미분류",lowStockThresholdOverride:"재고 부족 임계값 (이 스풀)",lowStockThresholdOverrideHelp:"전역 임계값({{global}}%)을 사용하려면 비워두세요.",clearRfid:"RFID 태그 초기화",rfidCleared:"RFID 태그가 초기화되었습니다",archive:"보관",restore:"복원",noSpools:"아직 스풀이 없습니다. 첫 번째 스풀을 추가하여 시작하세요.",noAvailableSpools:"사용 가능한 스풀이 없습니다. 재고에 스풀을 추가하거나 먼저 다른 슬롯에서 해제하세요.",kProfiles:"K-프로필",addKProfile:"K-프로필 추가",assignSpool:"스풀 할당",unassignSpool:"할당 해제",assignSuccess:"스풀 할당 및 AMS 슬롯 구성됨",assignFailed:"스풀 할당 실패",selectSpool:"이 슬롯에 할당할 스풀 선택",assigned:"할당됨",assigning:"할당 중...",searchSpools:"스풀 검색...",showAllSpools:"모든 스풀 표시",spoolmanSpools:"Spoolman 스풀",allMaterials:"모든 재료",filterByBrand:"브랜드로 필터...",showArchived:"보관된 항목 표시",quickAdd:"빠른 추가 (재고)",quantity:"수량",stock:"재고",configured:"구성됨",spoolsCreated:"{{count}}개 스풀 생성됨",spoolsPartiallyCreated:"{{total}}개 중 {{created}}개 스풀 생성됨 (일부 실패)",spoolCreated:"스풀 생성됨",spoolUpdated:"스풀 업데이트됨",spoolDeleted:"스풀 삭제됨",deepLinkSpoolNotFound:"스풀을 찾을 수 없음",deepLinkFetchFailed:"스풀을 불러올 수 없음 — 다시 시도하세요",spoolArchived:"스풀 보관됨",spoolRestored:"스풀 복원됨",kProfileSaveFailed:"K-프로필 설정을 저장할 수 없습니다",syncWeightSpoolNotFound:"스풀을 찾을 수 없음 — 삭제되었을 수 있습니다",syncWeightSpoolmanUnreachable:"Spoolman에 연결할 수 없음 — 나중에 다시 시도하세요",syncWeightFailed:"무게 동기화 실패",spoolmanUnreachable:"Spoolman에 연결할 수 없습니다 — 나중에 다시 시도하세요",deleteSpoolNotFound:"스풀을 찾을 수 없음 — 이미 삭제되었을 수 있습니다",deleteFailed:"스풀 삭제 실패",archiveSpoolNotFound:"스풀을 찾을 수 없음 — 이미 삭제되었을 수 있습니다",archiveFailed:"스풀 보관 실패",restoreSpoolNotFound:"스풀을 찾을 수 없음 — 이미 삭제되었을 수 있습니다",restoreFailed:"스풀 복원 실패",saveFailed:"변경 사항 저장 실패",tagClearFailed:"태그 초기화 실패",deleteConfirm:"이 스풀을 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.",archiveConfirm:"이 스풀을 보관하시겠습니까?",advancedSettings:"고급 설정",filamentInfoTab:"필라멘트 정보",paProfileTab:"PA 프로필",filamentInfo:"필라멘트",additional:"추가",loadingPresets:"클라우드 프리셋 불러오는 중...",cloudConnected:"클라우드 연결됨",cloudNotConnected:"클라우드 연결되지 않음 (기본값 사용)",recentColors:"최근",searchColors:"색상 검색...",searchResults:"검색 결과",allColors:"모든 색상",commonColors:"일반 색상",showLess:"간략히 보기",showAll:"모두 보기",noColorsFound:"검색과 일치하는 색상 없음",noResults:"일치하는 항목 없음",extraColorsLabel:"추가 색상",extraColorsPlaceholder:"EC984C,#6CD4BC,A66EB9,D87694",extraColorsHint:"2~8개의 16진수 색상값을 쉼표로 구분하여 붙여넣으세요. 그라데이션으로 렌더링됩니다.",extraColorsInvalid:"유효하지 않은 16진수 무시됨: {{tokens}}",colorEffectLabel:"효과",colorEffect:{none:"없음",sparkle:"스파클",wood:"우드",marble:"마블",glow:"글로우",matte:"매트",silk:"실크",galaxy:"갤럭시",rainbow:"레인보우",metal:"메탈",translucent:"반투명",gradient:"그라데이션",dualColor:"듀얼 컬러",triColor:"트리 컬러",multicolor:"멀티컬러"},selectMaterialFirst:"먼저 필라멘트 정보 탭에서 재료를 선택해 주세요.",noPrintersConfigured:"구성된 프린터 없음. PA 프로필을 사용하려면 프린터를 추가하세요.",matchingFilter:"일치",anyBrand:"모든 브랜드",anyVariant:"모든 변형",autoSelect:"자동 선택",matches:"일치",match:"일치",noMatches:"일치 없음",connected:"연결됨",offline:"오프라인",printerOffline:"프린터가 오프라인입니다. 연결하여 보정 프로필을 확인하세요.",noKProfilesMatch:"선택한 필라멘트와 일치하는 K-프로필이 없습니다.",leftNozzle:"왼쪽 노즐",rightNozzle:"오른쪽 노즐",profilesSelected:"보정 프로필 선택됨",totalInventory:"총 재고",totalConsumed:"총 소비량",byMaterial:"재료별",inPrinter:"프린터 내",lowStock:"재고 부족",sinceTracking:"추적 시작 이후",loadedInAms:"AMS/외부에 장착됨",remaining:"남은 양",weightCheck:"무게 확인",lastWeighed:"마지막 계량",neverWeighed:"계량 기록 없음",search:"스풀 검색...",showing:"표시 중",to:"~",of:"/",show:"표시",spools:"스풀",spool:"스풀",page:"페이지",noSpoolsMatch:"결과를 찾을 수 없음",noSpoolsMatchDesc:"검색 또는 필터를 조정하여 원하는 항목을 찾아보세요.",active:"활성",archived:"보관됨",all:"전체",used:"사용됨",new:"새것",clearFilters:"필터 초기화",table:"테이블",cards:"카드",net:"순",groupSimilar:"그룹화",groupedSpools:"동일한 스풀 {{count}}개",groupedRows:"행",columns:"열",configureColumns:"열 구성",configureColumnsDesc:"드래그하여 열 순서를 변경하거나 화살표를 사용하세요. 눈 아이콘으로 표시 여부를 전환합니다.",visible:"표시됨",reset:"초기화",cancel:"취소",applyChanges:"변경 사항 적용",moveUp:"위로 이동",moveDown:"아래로 이동",hideColumn:"열 숨기기",showColumn:"열 표시",linkToSpool:"스풀에 연결",tagLinked:"태그가 스풀에 연결됨",tagLinkFailed:"태그 연결 실패",tagAlreadyLinked:"태그가 이미 다른 스풀에 연결됨",unknownTag:"알 수 없는 RFID 태그 감지됨",usageHistory:"사용 기록",noUsageHistory:"사용 기록 없음",printName:"인쇄 이름",weightConsumed:"소비 무게",clearHistory:"초기화",historyCleared:"사용 기록 초기화됨",fillSourceLabel:"(재고)",lowStockThresholdError:"임계값은 0.1에서 99.9 사이여야 합니다",assignMismatchTitle:"재료 불일치",assignMismatchMessage:'선택한 스풀 재료 "{{spoolMaterial}}"이(가) {{location}}의 트레이 재료 "{{trayMaterial}}"과(와) 일치하지 않습니다. 그래도 할당하시겠습니까?',assignMismatchConfirm:"그래도 할당",assignPartialMismatchMessage:'스풀 재료 "{{spoolMaterial}}"이(가) {{location}}의 "{{trayMaterial}}"과(와) 유사하지만 정확히 일치하지 않습니다. 계속하시겠습니까?',assignProfileMismatchMessage:'스풀 프로필 "{{spoolProfile}}"이(가) {{location}}의 트레이 프로필 "{{trayProfile}}"과(와) 일치하지 않습니다. 계속하시겠습니까?',assignReconfigureNote:"AMS 슬롯이 스풀의 프로필을 사용하도록 재구성됩니다.",spoolmanFilamentCatalog:"Spoolman 필라멘트 카탈로그",pickFromSpoolmanCatalog:"Spoolman 카탈로그에서 선택…",spoolmanFilamentSelected:"Spoolman 카탈로그에서 필라멘트 선택됨",spoolmanFilamentUnlinked:"필라멘트 카탈로그 연결 해제됨",noSpoolmanFilaments:"Spoolman 카탈로그에서 필라멘트를 찾을 수 없음",spoolmanFilamentColorSwatch:"필라멘트 색상",spoolWeightManagedBySpoolman:"빈 스풀 무게는 Spoolman에서 필라멘트 유형별로 관리됩니다",spoolmanCatalogLoadFailed:"Spoolman 필라멘트 카탈로그 불러오기 실패",subtitle:"스풀 관리",storageLocationNone:"위치 미설정",resetConsumedCounter:"카운터 초기화",resetConsumedCounterTooltip:"이 스풀의 소비된 그램 카운터를 0으로 초기화합니다. 잔여 무게는 변경되지 않습니다.",resetConsumedCounterConfirm:"이 스풀의 소비된 그램 카운터를 0으로 초기화하시겠습니까? 이후 인쇄는 처음부터 추적됩니다. 스풀 자체, 잔여 무게 계산 및 설정은 변경되지 않습니다.",resetAllConsumedCounters:"모든 카운터 초기화",resetAllConsumedCountersTooltip:"모든 스풀의 소비된 그램 카운터를 0으로 초기화합니다. 잔여 무게는 변경되지 않습니다.",resetAllConsumedCountersConfirm:'{{count}}개 스풀(아카이브 포함)의 소비된 그램 카운터를 모두 0으로 초기화하시겠습니까? 이는 "총 소비량" 통계를 지워 이후 인쇄가 처음부터 추적되도록 합니다. 스풀과 잔여 무게는 변경되지 않습니다.',consumedCounterReset:"카운터가 초기화되었습니다",allConsumedCountersReset:"{{count}}개 스풀의 카운터가 초기화되었습니다",resetConsumedCounterFailed:"카운터 초기화 실패"},timelapse:{title:"타임랩스",create:"타임랩스 만들기",download:"다운로드",delete:"삭제",preview:"미리보기",frameRate:"프레임 속도",quality:"품질",processing:"처리 중...",noTimelapses:"사용 가능한 타임랩스 없음"},ams:{title:"AMS",slot:"슬롯",empty:"비어 있음",emptySlot:"빈 슬롯",unknown:"알 수 없음",humidity:"습도",temperature:"온도",filamentType:"필라멘트 유형",filamentColor:"색상",remaining:"남은 양",history:"AMS 기록",noHistory:"기록 없음",configureSlot:"슬롯 구성",externalSpool:"외부 스풀",profile:"프로필",kFactor:"K 계수",fill:"채우기",configure:"구성",used:"사용됨",remainingUnit:"남음",slotEmpty:"비어 있음",emptySlotReset:"필라멘트가 할당되지 않음"},printModal:{title:"인쇄 시작",selectPrinter:"프린터 선택",selectPlate:"플레이트 선택",filamentMapping:"필라멘트 매핑",totalCost:"총 비용:",slotRemainingShort:" - {{grams}}g 남음",printSettings:"인쇄 설정",bedLeveling:"베드 레벨링",flowCalibration:"유량 보정",vibrationCalibration:"진동 보정",layerInspection:"첫 번째 레이어 검사",timelapse:"타임랩스",startPrint:"인쇄 시작",addToQueue:"대기열에 추가",cancel:"취소",noPrintersAvailable:"사용 가능한 프린터 없음",printerBusy:"프린터가 사용 중입니다",printerOffline:"프린터가 오프라인입니다",sameTypeDifferentColor:"같은 유형, 다른 색상",filamentTypeNotLoaded:"필라멘트 유형이 장착되지 않음",openCalendar:"달력 열기",leftNozzle:"L",rightNozzle:"R",leftNozzleTooltip:"왼쪽 노즐",rightNozzleTooltip:"오른쪽 노즐",filamentOverride:"필라멘트 재정의",filamentOverrideHint:"선택적으로 모델 기반 할당을 위해 필라멘트를 재정의합니다. 스케줄러는 원래 3MF 값 대신 선택한 필라멘트와 일치시킵니다.",originalFilament:"원래",overrideWith:"재정의",resetToOriginal:"원래대로 초기화",insufficientFilamentTitle:"필라멘트 부족",insufficientFilamentMessage:"일부 할당된 스풀에 이 인쇄에 필요한 것보다 적은 필라멘트가 남아 있습니다:",insufficientFilamentLine:"{{printer}} - {{slot}}: {{required}}g 필요, {{remaining}}g 남음",printAnyway:"그래도 인쇄",forceColorMatch:"색상 일치 강제",staggerPrinterStarts:"프린터 시작 분산",staggerGroupSize:"그룹 크기",staggerInterval:"간격 (분)",staggerPreview:"{{printers}}대 프린터 → {{size}}대씩 {{groups}}개 그룹, 매 {{interval}}분마다 시작",staggerLastGroup:"마지막 그룹: {{count}}",staggerTotal:"합계: {{minutes}}분",staggerToPrinters:"{{count}}대 프린터에 분산",gcodeInjection:"자동 인쇄 G-code 삽입"},backup:{includesEncryptionKey:"로컬 백업에는 MFA 암호화 키 파일(DATA_DIR/.mfa_encryption_key)이 포함되어 백업 ZIP이 자체 완결됩니다. ZIP 파일을 민감하게 취급하세요 — 파일을 가진 누구나 내부에 저장된 OIDC 클라이언트 비밀과 TOTP 비밀을 복호화할 수 있습니다.",title:"백업 및 복원",createBackup:"백업 만들기",restoreBackup:"백업 복원",restoreDescription:"백업 파일에서 모든 데이터 교체",downloadBackup:"백업 다운로드",uploadBackup:"백업 업로드",lastBackup:"마지막 백업",autoBackup:"자동 백업",backupNow:"지금 백업",restoreWarning:"경고: 백업을 복원하면 현재 모든 데이터를 덮어씁니다.",includeArchives:"아카이브 포함",includeSettings:"설정 포함",includeProfiles:"프로필 포함",backupSuccess:"백업이 성공적으로 생성되었습니다",restoreSuccess:"백업이 성공적으로 복원되었습니다",backupFailed:"백업 실패",restoreFailed:"복원 실패",restoreNote:"복원 중 가상 프린터가 중지됩니다",githubBackup:"Git 백업",enabled:"활성화됨",cloudLoginRequired:"Bambu 클라우드 로그인 필요. GitHub 백업을 활성화하려면 프로필 → 클라우드 프로필에서 로그인하세요.",cloudLoginRequiredShort:"클라우드 로그인 필요",githubDescription:"백업 및 버전 기록을 위해 비공개 GitHub 저장소에 프로필을 자동으로 동기화합니다.",repositoryUrl:"저장소 URL",repoUrlPlaceholderGitHub:"https://github.com/username/repo-name",repoUrlPlaceholderGitea:"https://gitea.example.com/username/repo-name",repoUrlPlaceholderForgejo:"https://forgejo.example.com/username/repo-name",repoUrlPlaceholderGitLab:"https://gitlab.com/username/repo-name",allowInsecureHttp:"비보안 HTTP 허용",allowInsecureHttpHint:"TLS가 없는 개인 네트워크의 자체 호스팅 인스턴스에 활성화",personalAccessToken:"개인 액세스 토큰",tokenSaved:"(저장됨)",enterNewToken:"업데이트하려면 새 토큰 입력",tokenHint:"콘텐츠 읽기/쓰기 권한이 있는 세분화된 토큰",branch:"브랜치",provider:"Git 제공자",providerGitHub:"GitHub",providerGitLab:"GitLab",providerGitea:"Gitea",providerForgejo:"Forgejo",manualOnly:"수동만",hourly:"매시간",daily:"매일",weekly:"매주",includeInBackup:"백업에 포함",kProfiles:"K-프로필",kProfilesDescription:"연결된 프린터의 압력 전진 보정",noPrintersConnected:"연결된 프린터 없음",printersConnected:"{{total}}개 중 {{connected}}개 연결됨",cloudProfiles:"클라우드 프로필",cloudProfilesDescription:"Bambu 클라우드의 필라멘트, 프린터 및 프로세스 프리셋",appSettings:"앱 설정",appSettingsDescription:"Bambuddy 구성 (전체 데이터베이스)",spoolInventory:"스풀 재고",spoolInventoryDescription:"필라멘트 스풀, 사용 기록 및 비용 추적",printArchives:"인쇄 아카이브",printArchivesDescription:"인쇄 기록 메타데이터 (gcode/3MF 파일 제외)",lastBackupAt:"마지막 백업:",noBackupsYet:"아직 백업 없음",next:"다음:",startingBackup:"백업 시작 중...",test:"테스트",enableBackup:"백업 활성화",testConnection:"연결 테스트",enterRepoUrl:"저장소 URL 입력",enterRepoAndToken:"저장소 URL 및 액세스 토큰 입력",repoRequired:"저장소 URL이 필요합니다",tokenRequired:"액세스 토큰이 필요합니다",githubBackupEnabled:"GitHub 백업 활성화됨",tokenUpdated:"토큰 업데이트됨",settingsSaved:"설정 저장됨",failedToSave:"저장 실패: {{message}}",backupCompleteFiles:"백업 완료 - {{count}}개 파일 업데이트됨",backupSkippedNoChanges:"변경 사항 없어 백업 건너뜀",backupFailed2:"백업 실패: {{message}}",clearedLogs:"{{count}}개 로그 초기화됨",failedToClearLogs:"로그 초기화 실패: {{message}}",history:"기록",clear:"초기화",date:"날짜",status:"상태",commit:"커밋",localBackup:"로컬 백업",localBackupDescription:"데이터베이스, 아카이브, 업로드 및 모든 파일을 포함한 Bambuddy 데이터의 전체 백업을 만듭니다.",downloadBackupLabel:"백업 다운로드",completeBackupZip:"전체 백업: 데이터베이스 + 모든 파일 (ZIP)",download:"다운로드",preparingBackup:"백업 준비 중...",creatingArchive:"백업 아카이브 생성 중... 대용량 아카이브의 경우 시간이 걸릴 수 있습니다.",downloadingFile:"백업 파일 다운로드 중...",backupDownloaded:"백업이 성공적으로 다운로드되었습니다",failedToCreateBackup:"백업 생성 실패: {{message}}",restore:"복원",restoreReplacesAll:"복원은 모든 데이터를 교체합니다.",restoreReplacesAllDetail:"현재 데이터베이스와 파일이 완전히 교체됩니다. 복원 후 재시작이 필요합니다.",restoreConfirmTitle:"백업 복원",restoreConfirmMessage:'"{{filename}}"에서 복원하시겠습니까? 현재 데이터베이스와 모든 파일이 완전히 교체됩니다. 복원 후 애플리케이션을 재시작해야 합니다.',restoreConfirmButton:"백업 복원",uploadingFile:"백업 파일 업로드 중...",backupRestoredRestart:"백업 복원됨. Bambuddy를 재시작하세요.",failedToRestore:"백업 복원 실패. 파일 형식을 확인하세요.",reloadNow:"지금 새로고침",creatingBackup:"백업 만드는 중",restoringBackup:"백업 복원 중",preparing:"준비 중...",processing:"처리 중...",doNotClosePage:"이 페이지를 닫거나 다른 곳으로 이동하지 마세요. 대용량 백업의 경우 몇 분이 걸릴 수 있습니다.",restoring:"복원 중...",restoreComplete:"복원 완료",restoreFailed2:"복원 실패",importSettings:"백업 파일에서 설정 가져오기",pleaseWaitRestoring:"데이터가 복원되는 동안 기다려 주세요",selectBackupFile:"백업 파일 클릭하여 선택 (.json 또는 .zip)",duplicateHandling:"중복 처리 방법:",matchPrinters:"프린터",matchPrintersBy:"일련번호로 일치",matchSmartPlugs:"스마트 플러그",matchSmartPlugsBy:"IP 주소로 일치",matchNotificationProviders:"알림 제공자",matchNotificationProvidersBy:"이름으로 일치",matchFilaments:"필라멘트",matchFilamentsBy:"이름 + 유형 + 브랜드로 일치",matchArchives:"아카이브",matchArchivesBy:"콘텐츠 해시로 일치 (항상 건너뜀)",matchPendingUploads:"대기 중인 업로드",matchPendingUploadsBy:"파일 이름으로 일치",matchSettingsTemplates:"설정 및 템플릿",matchSettingsTemplatesBy:"항상 덮어씀",replaceExisting:"기존 데이터 교체",keepExisting:"기존 데이터 유지",overwriteDescription:"백업 데이터로 이미 존재하는 항목 덮어쓰기",keepDescription:"아직 존재하지 않는 항목만 복원",overwriteCaution:"주의:",overwriteWarning:"덮어쓰기는 현재 구성을 백업 데이터로 교체합니다. 보안상 프린터 액세스 코드는 절대 덮어쓰지 않습니다.",cancel:"취소",processingBackup:"백업 파일 처리 중...",itemsRestored:"복원된 항목",itemsSkipped:"건너뛴 항목",restored:"복원됨",skippedAlreadyExist:"건너뜀 (이미 존재)",filesCategory:"파일 (3MF, 썸네일 등)",andMore:"...및 {{count}}개 더",newApiKeysGenerated:"새 API 키 생성됨",keysShownOnce:"이 키는 한 번만 표시됩니다. 지금 복사하세요!",copy:"복사",noDataFound:"백업 파일에서 복원할 데이터를 찾을 수 없습니다.",close:"닫기",scheduledBackup:"예약 백업",scheduledBackupDescription:"일정에 따라 백업 스냅샷을 자동으로 생성합니다. 출력 디렉토리를 NAS 또는 외부 저장소에 마운트할 수 있습니다.",frequency:"주기",backupTime:"시간",retention:"보존",retentionDescription:"유지할 백업 수",outputPath:"출력 경로",outputPathPlaceholder:"기본값: {{path}}",outputPathDescription:"기본 위치를 사용하려면 비워두세요",runNow:"지금 실행",backupFiles:"백업 파일",noScheduledBackups:"아직 백업 없음",deleteBackup:"삭제",deleteBackupConfirm:"이 백업 파일을 삭제하시겠습니까?",backupRunning:"백업 진행 중...",scheduledBackupComplete:"백업이 성공적으로 완료되었습니다",scheduledBackupFailed:"백업 실패",nextBackup:"다음 백업",backupSize:"크기",localTimeHint:"현지 시간 ({{tz}})",defaultPathLabel:"기본값:",categories:{settings:"설정",notification_providers:"알림 제공자",notification_templates:"알림 템플릿",smart_plugs:"스마트 플러그",printers:"프린터",filaments:"필라멘트",maintenance_types:"유지 관리 유형",archives:"아카이브",projects:"프로젝트",pending_uploads:"대기 중인 업로드",external_links:"외부 링크",api_keys:"API 키"},repoIsPrivate:"저장소가 비공개입니다 — 안전하게 백업할 수 있습니다.",repoIsPublicWarning:"저장소가 공개입니다. Bambuddy 백업에는 MQTT 자격증명, Home Assistant 토큰, Prometheus 토큰, Bambu Cloud 이메일, K-프로파일을 통한 프린터 액세스 코드가 포함됩니다. 공급자 설정에서 저장소를 비공개로 변경할 때까지 저장이 차단됩니다.",repoVisibilityUnknown:"저장소 공개 여부를 확인할 수 없습니다. Bambuddy는 비공개로 확인된 저장소에만 백업하며, 저장이 차단됩니다."},tags:{title:"태그",addTag:"태그 추가",editTag:"태그 편집",deleteTag:"태그 삭제",tagName:"태그 이름",tagColor:"태그 색상",noTags:"태그 없음",deleteConfirm:"이 태그를 삭제하시겠습니까?",manageTags:"태그 관리"},uploadModal:{title:"3MF 파일 업로드",dragDrop:".3mf 파일을 여기에 드래그 앤 드롭",or:"또는",browseFiles:"파일 탐색",extractionInfo:"프린터 모델은 3MF 파일 메타데이터에서 자동으로 추출됩니다.",uploaded:"업로드됨",failed:"실패",uploading:"업로드 중...",upload:"업로드",uploadFailed:"업로드 실패"},editArchive:{title:"아카이브 편집",name:"이름",namePlaceholder:"인쇄 이름",printer:"프린터",noPrinter:"프린터 없음",project:"프로젝트",noProject:"프로젝트 없음",itemsPrinted:"인쇄된 항목",itemsPrintedHelp:"이 인쇄 작업에서 생산된 항목 수",notes:"메모",notesPlaceholder:"이 인쇄에 대한 메모 추가...",externalLink:"외부 링크",externalLinkPlaceholder:"https://printables.com/model/...",externalLinkHelp:"Printables, Thingiverse 또는 다른 출처 링크",tags:"태그",tagsPlaceholder:"태그 추가...",addMoreTags:"더 많은 태그 추가...",matchingTags:'"{{query}}"와 일치',existingTags:"기존 태그",clickToAdd:"(클릭하여 추가)",status:"상태",failureReason:"실패 원인",selectReason:"원인 선택...",photos:"인쇄 결과 사진",photosHelp:"+를 클릭하여 인쇄 결과 사진 추가",printResult:"인쇄 결과",saving:"저장 중...",failureReasons:{adhesionFailure:"접착 실패",spaghettiDetached:"스파게티 / 분리",layerShift:"레이어 시프트",cloggedNozzle:"노즐 막힘",filamentRunout:"필라멘트 소진",warping:"휨",stringing:"스트링",underExtrusion:"압출 부족",powerFailure:"전원 실패",userCancelled:"사용자 취소",other:"기타"},statuses:{completed:"완료됨",failed:"실패",aborted:"취소됨",printing:"인쇄 중"}},kProfiles:{title:"K-프로필",noPrintersConfigured:"구성된 프린터 없음",addPrinterInSettings:"K-프로필을 관리하려면 설정에서 프린터를 추가하세요",noActivePrinters:"활성 프린터 없음",enablePrinterConnection:"K-프로필을 보려면 프린터 연결을 활성화하세요",loadingProfiles:"K-프로필 불러오는 중...",printerOffline:"프린터 오프라인",printerOfflineDesc:"선택한 프린터가 연결되지 않았습니다. 켜서 K-프로필을 확인하세요.",noMatchingProfiles:"일치하는 프로필 없음",noMatchingProfilesDesc:"검색 기준과 일치하는 프로필이 없습니다",noKProfiles:"K-프로필 없음",noKProfilesDesc:"{{diameter}}mm 노즐에 대한 압력 전진 프로필이 없습니다",createFirstProfile:"첫 번째 프로필 만들기",printer:"프린터",nozzle:"노즐",refresh:"새로고침",addProfile:"프로필 추가",export:"내보내기",import:"가져오기",select:"선택",selectAll:"모두 선택",delete:"삭제",searchPlaceholder:"이름 또는 필라멘트로 검색...",allExtruders:"모든 압출기",leftOnly:"왼쪽만",rightOnly:"오른쪽만",allFlow:"모든 유량",hfOnly:"HF만",sOnly:"S만",sortName:"정렬: 이름",sortKValue:"정렬: K값",sortFilament:"정렬: 필라멘트",leftExtruder:"왼쪽 압출기",rightExtruder:"오른쪽 압출기",modal:{addTitle:"K-프로필 추가",editTitle:"K-프로필 편집",profileName:"프로필 이름",profileNamePlaceholder:"내 PLA 프로필",kValue:"K값",kValuePlaceholder:"0.020",kValueHelp:"일반 범위: PLA 0.01~0.06, PETG 0.02~0.10",filament:"필라멘트",selectFilament:"필라멘트 선택...",noFilamentsHelp:"필라멘트를 찾을 수 없습니다. 먼저 Bambu Studio에서 K-프로필을 만드세요.",flowType:"유량 유형",highFlow:"고유량",standard:"표준",nozzleSize:"노즐 크기",extruder:"압출기",extruders:"압출기",left:"왼쪽",right:"오른쪽",notes:"메모 (로컬 저장)",notesPlaceholder:"이 프로필에 대한 메모 추가...",notesHelp:"메모는 프린터가 아닌 Bambuddy에 저장됩니다",syncing:"프린터와 동기화 중...",savingExtruder:"압출기 {{current}}/{{total}}에 저장 중...",pleaseWait:"기다려 주세요"},deleteConfirm:{title:"프로필 삭제",cannotUndo:"이 작업은 취소할 수 없습니다",message:'프린터에서 "{{name}}"을(를) 삭제하시겠습니까?'},bulkDelete:{title:"프로필 삭제",cannotUndo:"이 작업은 취소할 수 없습니다",message:"프린터에서 선택한 {{count}}개 프로필을 삭제하시겠습니까?"},toast:{profileSaved:"K-프로필 저장됨",profilesSaved:"{{count}}개 압출기에 K-프로필 저장됨",selectAtLeastOneExtruder:"적어도 하나의 압출기를 선택해 주세요",profileDeleted:"K-프로필 삭제됨",profilesDeleted:"{{count}}개 프로필 삭제됨",exportedProfiles:"{{count}}개 프로필 내보냄",importedProfiles:"{{total}}개 중 {{count}}개 프로필 가져옴",noProfilesToExport:"내보낼 프로필 없음",invalidFileFormat:"유효하지 않은 파일 형식",failedToParseImport:"가져오기 파일 파싱 실패",failedToSaveBatch:"K-프로필 저장 실패",noteSaved:"메모 저장됨",failedToSaveNote:"메모 저장 실패"},permission:{noRead:"프로필 새로고침 권한이 없습니다",noCreate:"프로필 추가 권한이 없습니다",noUpdate:"K-프로필 업데이트 권한이 없습니다",noDelete:"K-프로필 삭제 권한이 없습니다",noExport:"프로필 내보내기 권한이 없습니다",noImport:"프로필 가져오기 권한이 없습니다"}},virtualPrinter:{title:"가상 프린터",running:"실행 중",stopped:"중지됨",description:{default:"Bambu Studio 및 OrcaSlicer에 표시되는 가상 프린터를 활성화합니다. 이 프린터로 전송된 파일은 인쇄 없이 바로 아카이브됩니다.",proxy:"실제 프린터로 슬라이서 트래픽을 릴레이하는 프록시를 활성화하여 모든 네트워크에서 원격 인쇄가 가능합니다."},enable:{title:"가상 프린터 활성화",visibleInSlicer:'슬라이서 검색에서 "Bambuddy"로 표시됨',proxyingTo:"{{name}}으로 프록시 중",notActive:"활성화되지 않음"},model:{title:"프린터 모델",description:"에뮬레이션할 프린터 모델을 선택하세요.",restartWarning:"모델 변경 시 가상 프린터가 재시작됩니다"},accessCode:{title:"액세스 코드",isSet:"액세스 코드가 설정됨",notSet:"액세스 코드가 설정되지 않음 - 활성화하려면 필요",placeholder:"8자리 코드 입력",placeholderChange:"변경하려면 새 코드 입력",hint:"정확히 8자여야 합니다. 슬라이서가 인증하는 데 사용됩니다.",charCount:"({{count}}/8)"},targetPrinter:{title:"대상 프린터",configured:"프록시 대상 구성됨",notConfigured:"대상 프린터가 선택되지 않음 - 프록시 모드에 필요",placeholder:"프린터 선택...",hint:"슬라이서 트래픽을 프록시할 프린터를 선택하세요. 프린터는 LAN 모드여야 합니다.",noPrinters:"구성된 프린터 없음. 프록시 모드를 사용하려면 먼저 프린터를 추가하세요."},remoteInterface:{title:"네트워크 인터페이스 재정의",configured:"인터페이스 재정의 활성",optional:"선택사항 - 자동 감지된 IP가 잘못된 경우 사용 (예: 여러 NIC, Docker, VPN)",placeholder:"자동 감지 (기본값)...",hint:"SSDP를 통해 광고되고 TLS 인증서에 사용되는 IP 주소를 재정의합니다. Bambuddy에 여러 네트워크 인터페이스가 있을 때 유용합니다."},mode:{title:"모드",archive:"아카이브",archiveDesc:"파일 즉시 아카이브",review:"검토",reviewDesc:"아카이브 전 검토",queue:"대기열",queueDesc:"아카이브 후 대기열 추가",proxy:"프록시",proxyDesc:"실제 프린터로 릴레이"},autoDispatch:{title:"자동 발송",description:"대기열에 추가될 때 자동으로 인쇄를 시작합니다. 꺼져 있으면 수동 발송을 기다립니다."},queueForceColorMatch:{title:"색상 일치 강제",description:"정확한 필라멘트 유형과 색상이 장착되지 않은 프린터에는 발송을 거부합니다. 기본적으로 꺼져 있음 — 이 옵션 없이는 대기열이 모델 전용 매칭을 사용하여 잘못된 색상이 장착된 프린터를 선택할 수 있습니다."},tailscaleDisabled:{title:"Tailscale 통합",description:"이 가상 프린터가 Tailscale을 통해 노출되도록 표시하려면 활성화하세요. 슬라이서에 붙여넣을 IP를 알 수 있도록 호스트의 Tailscale 주소를 표시합니다. CA 가져오기 단계는 변경되지 않음 — 이 토글은 인증서에 영향을 미치지 않습니다."},setupRequired:{title:"설정 필요",description:"가상 프린터 기능이 작동하려면 추가 시스템 구성이 필요합니다. 여기에는 포트 포워딩, 방화벽 규칙 및 플랫폼별 설정이 포함됩니다.",readGuide:"활성화 전에 설정 가이드를 읽으세요"},archiveNameSource:{title:"아카이브 이름 출처",description:'가상 프린터를 통해 파일이 도착할 때 새 아카이브의 이름 지정 방법을 선택합니다. "메타데이터"는 3MF의 슬라이서 내장 제목을 사용합니다(기본값). "파일 이름"은 Bambu Studio가 FTP를 통해 전송한 파일 이름을 사용합니다.',metadata:"메타데이터",filename:"파일 이름"},howItWorks:{title:"작동 방식",step1:"같은 LAN에서 가상 프린터는 검색을 통해 슬라이서(Bambu Studio / OrcaSlicer)에 자동으로 나타납니다. 다른 네트워크에서는 IP 주소와 액세스 코드로 수동으로 추가하세요.",step2:'아카이브, 검토, 대기열 모드에서 슬라이서의 "전송" 버튼을 사용하여 3MF 파일을 Bambuddy에 업로드하세요. 슬라이서는 "인쇄 성공"을 표시하지만 파일은 저장되고 인쇄되지 않습니다.',step3:"프록시 모드에서 가상 프린터는 모든 트래픽을 실제 프린터로 릴레이합니다 — 직접 연결된 것처럼 즉시 인쇄가 시작됩니다."},status:{title:"상태 세부 정보",printerName:"프린터 이름",model:"모델",serialNumber:"일련 번호",mode:"모드",pendingFiles:"대기 중인 파일",targetPrinter:"대상 프린터",ftpPort:"FTP 포트",mqttPort:"MQTT 포트",ftpConnections:"FTP 연결",mqttConnections:"MQTT 연결"},toast:{updated:"가상 프린터 설정 업데이트됨",failedToUpdate:"설정 업데이트 실패",copyFailed:"복사 실패 — 텍스트를 수동으로 선택하여 복사해 보세요",accessCodeRequired:"먼저 액세스 코드를 설정해 주세요",targetPrinterRequired:"먼저 대상 프린터를 선택해 주세요",bindIpRequired:"먼저 바인드 IP를 설정해 주세요",accessCodeEmpty:"액세스 코드는 비워둘 수 없습니다",accessCodeLength:"액세스 코드는 정확히 8자여야 합니다",created:"가상 프린터 생성됨",failedToCreate:"가상 프린터 생성 실패",deleted:"가상 프린터 삭제됨",failedToDelete:"가상 프린터 삭제 실패"},list:{title:"가상 프린터",add:"추가",addFirst:"가상 프린터 추가",empty:"구성된 가상 프린터 없음. 하나를 추가하여 시작하세요."},bindIp:{title:"바인드 인터페이스",placeholder:"인터페이스 선택...",hint:"이 가상 프린터가 바인딩할 네트워크 인터페이스. 프린터당 고유해야 합니다."},proxy:{accessCodeHint:"프록시 모드에서는 슬라이서에서 대상 프린터의 액세스 코드를 사용하세요. 연결은 실제 프린터로 투명하게 전달됩니다."},addDialog:{title:"가상 프린터 추가",name:"이름",hint:"생성 후 액세스 코드, 대상 프린터 및 기타 설정을 구성할 수 있습니다.",create:"생성"},deleteConfirm:{title:"가상 프린터 삭제",message:'"{{name}}"을(를) 삭제하시겠습니까? 이 프린터의 모든 서비스가 중지됩니다.'},caCert:{title:"슬라이서 인증서",description:"가상 프린터는 Bambuddy CA가 서명한 TLS 인증서를 사용합니다. 이 CA 인증서를 슬라이서의 신뢰 저장소에 한 번만 가져오면 연결을 수락합니다 — 명령줄에서 복사할 필요가 없습니다.",copy:"복사",copied:"복사됨",download:"다운로드",fingerprint:"SHA-256"}},modelViewer:{openInSlicer:"슬라이서에서 열기",tabs:{model:"3D 모델",gcode:"G-code 미리보기"},notAvailable:"사용 불가",notSliced:"슬라이싱되지 않음",plates:"플레이트",allPlates:"모든 플레이트",plateNumber:"플레이트 {{number}}",plateCount:"플레이트 {{count}}개",plateCount_other:"플레이트 {{count}}개",objectCount:"개체 {{count}}개",objectCount_other:"개체 {{count}}개",filamentCount:"필라멘트 {{count}}개",filamentCount_other:"필라멘트 {{count}}개",eta:"예상 {{minutes}}분",noPreview:"이 파일에 대한 미리보기를 사용할 수 없습니다",pagination:{pageOf:"{{total}}페이지 중 {{current}}",prev:"이전",next:"다음"},errors:{failedToLoad:"파일 불러오기 실패",noMeshes:"3MF 파일에서 메쉬를 찾을 수 없음",unsupportedFormat:"지원되지 않는 파일 형식"}},maintenanceDescriptions:{lubricateCarbonRods:"부드러운 움직임을 위해 카본 로드에 윤활유 도포",lubricateRails:"부드러운 움직임을 위해 선형 레일에 윤활유 도포",cleanNozzle:"막힘 방지를 위해 핫엔드와 노즐 청소",checkBelts:"정확한 인쇄를 위해 벨트 장력 확인",cleanBuildPlate:"접착력 향상을 위해 빌드 플레이트 청소",checkExtruder:"마모 여부 확인을 위해 압출기 기어 점검",checkCooling:"냉각 팬이 제대로 작동하는지 확인",generalInspection:"전반적인 프린터 점검",cleanCarbonRods:"마찰 감소를 위해 카본 로드 청소",lubricateSteelRods:"부드러운 움직임을 위해 스틸 로드에 윤활유 도포",cleanSteelRods:"마찰 감소를 위해 스틸 로드 청소",cleanLinearRails:"먼지와 이물질 제거를 위해 선형 레일 닦기",checkPtfeTube:"마모 또는 손상 여부 확인을 위해 PTFE 튜브 점검",replaceHepaFilter:"공기 품질을 위해 HEPA 필터 교체",replaceCarbonFilter:"활성탄 필터 교체",lubricateLeftNozzleRail:"왼쪽 노즐 레일 윤활 (H2 시리즈)"},smartPlugs:{offline:"오프라인",admin:"관리자",openPlugAdminPage:"플러그 관리 페이지 열기",deleteSmartPlug:"스마트 플러그 삭제",turnOnSmartPlug:"스마트 플러그 켜기",turnOffSmartPlug:"스마트 플러그 끄기",turnOn:"켜기",turnOff:"끄기",addSmartPlug:{scanningNetwork:"네트워크 스캔 중...",chooseEntity:"엔티티 선택...",connectionFailed:"연결 실패",searchEntities:"엔티티 검색...",searchPowerSensors:"전력 센서 검색...",searchEnergySensors:"에너지 센서 검색...",placeholders:{plugName:"거실 플러그",mqttStateOnValue:"ON, true, 1",mqttSameAsPower:"전력 토픽과 같거나 다름"}},linkedTo:"연결됨:",monitorOnly:"모니터만",alerts:"알림",scheduleOn:"켜기 {{time}}",scheduleOff:"끄기 {{time}}",on:"켜짐",off:"꺼짐",power:"전력",kwhToday:"오늘 kWh",settings:"설정",automationSettings:"자동화 설정",showInSwitchbar:"스위치바에 표시",quickAccessSidebar:"사이드바에서 빠른 접근",enabled:"활성화됨",enableAutomation:"이 플러그의 자동화 활성화",autoOn:"자동 켜기",autoOnDescription:"인쇄 시작 시 켜기",autoOff:"자동 끄기",autoOffDescription:"인쇄 완료 시 끄기 (1회)",autoOffPersistent:"계속 활성화",autoOffPersistentDescription:"1회성 대신 인쇄 사이에 활성화 유지",turnOffDelayMode:"끄기 지연 모드",time:"시간",temp:"온도",delayMinutes:"지연 (분)",tempThreshold:"온도 임계값 (°C)",tempThresholdDescription:"노즐이 이 온도 이하로 냉각될 때 끄기",edit:"편집",deleteConfirm:'"{{name}}"을(를) 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.',turnOnConfirm:'"{{name}}"을(를) 켜시겠습니까?',turnOffConfirm:'"{{name}}"을(를) 끄시겠습니까? 연결된 장치의 전원이 차단됩니다.',failedToTurn:'"{{name}}" {{action}} 실패',unknown:"알 수 없음",addTitle:"스마트 플러그 추가",editTitle:"스마트 플러그 편집",stopScanning:"스캔 중지",discoverTasmota:"Tasmota 장치 검색",foundDevices:"{{count}}개 장치 발견 - 클릭하여 선택:",noDevicesFound:"네트워크에서 Tasmota 장치를 찾을 수 없음",haNotConfigured:"Home Assistant가 구성되지 않았습니다.",haSettingsPath:"설정 → 네트워크 → Home Assistant",selectEntity:"엔티티 선택 *",ipAddress:"IP 주소 *",nameLabel:"이름 *",username:"사용자 이름",password:"비밀번호",authHint:"Tasmota 장치에 인증이 필요하지 않으면 비워두세요",linkToPrinter:"프린터에 연결",noPrinter:"프린터 없음 (수동 제어만)",linkingDescription:"연결하면 인쇄 시작/완료 시 자동 켜기/끄기가 활성화됩니다",powerAlerts:"전력 알림",alertAbove:"초과 시 알림 (W)",alertBelow:"미만 시 알림 (W)",alertDescription:"전력 소비가 이 임계값을 초과할 때 알림 받기. 해당 방향을 비활성화하려면 비워두세요.",dailySchedule:"일일 스케줄",turnOnAt:"켜기 시각",turnOffAt:"끄기 시각",scheduleDescription:"매일 이 시간에 자동으로 켜기/끄기. 해당 동작을 건너뛰려면 비워두세요.",showOnPrinterCard:"프린터 카드에 표시",displayOnPrinterCard:"프린터 카드에 버튼 표시",connectedResult:"연결됨!",deviceLabel:"장치: {{name}} - ",stateLabel:"상태: {{state}}",test:"테스트",delete:"삭제",save:"저장",add:"추가",cancel:"취소",failedToStartScan:"스캔 시작 실패",nameRequired:"이름이 필요합니다",entityRequired:"Home Assistant 플러그에는 엔티티가 필요합니다",mqttTopicRequired:"전력, 에너지 또는 상태 모니터링을 위한 MQTT 토픽이 하나 이상 구성되어야 합니다",loadingEntities:"엔티티 불러오는 중...",loading:"불러오는 중...",failedToLoadEntities:"엔티티 불러오기 실패: {{error}}",noEntitiesMatching:'"{{search}}"과 일치하는 엔티티를 찾을 수 없음',noEntitiesAvailable:"사용 가능한 엔티티 없음",searchingEntities:"모든 엔티티 검색 중 ({{count}}개 발견)",showingEntities:"switch, light, input_boolean 표시 중 ({{count}}개 사용 가능)",energyMonitoringOptional:"에너지 모니터링 (선택사항)",energyMonitoringHint:"전력/에너지 데이터를 제공하는 센서를 검색하여 선택하세요.",powerSensorW:"전력 센서 (W)",energyTodayKwh:"오늘 에너지 (kWh)",totalEnergyKwh:"총 에너지 (kWh)",noMatchingSensors:"일치하는 센서 없음",none:"없음",mqttNotConfigured:"MQTT 브로커가 구성되지 않았습니다.",mqttSettingsPath:"설정 → 네트워크 → MQTT 게시",mqttNotConfiguredSuffix:"(게시를 활성화할 필요는 없고 브로커 세부 정보만 입력하면 됩니다).",mqttMonitorOnlyDescription:"MQTT 플러그는 MQTT 구독을 통해 전력/에너지 데이터를 받습니다. 켜기/끄기 제어는 불가능 — MQTT 브로커나 홈 자동화 시스템을 사용하세요.",powerMonitoring:"전력 모니터링",energyMonitoring:"에너지 모니터링",stateMonitoring:"상태 모니터링",optional:"선택사항",topic:"토픽",jsonPath:"JSON 경로",multiplier:"배수",onValue:"ON 값",mqttPowerHint:`JSON 경로는 JSON 페이로드에서 값을 추출합니다 (예: "power_l1"). 토픽이 원시 숫자 값을 게시하면 비워두세요.
+Valore ON: la stringa esatta che significa "ON". Lascia vuoto per rilevamento auto (ON, true, 1).`,restControl:"Controllo",restOnUrl:"URL accensione",restOffUrl:"URL spegnimento",restOnBody:"Corpo richiesta ON",restOffBody:"Corpo richiesta OFF",restMethod:"Metodo HTTP",restHeaders:"Custom Headers (JSON)",restStatusUrl:"URL stato",restStatusPath:"Percorso JSON stato",restStatusOnValue:"Valore ON",restPowerUrl:"URL potenza",restPowerPath:"Percorso JSON potenza",restPowerMultiplier:"Moltiplicatore potenza",restEnergyUrl:"URL energia",restEnergyPath:"Percorso JSON energia",restEnergyMultiplier:"Moltiplicatore energia",restUrlRequired:"È richiesto almeno un URL (ON o OFF) per le prese REST",restHeadersHint:'es. {"Authorization": "Bearer your-token"}',restBodyHint:'es. ON, {"state": "on"}',restStatusHint:"URL per recuperare lo stato attuale",restPathHint:"es. state o data.power.status",restPowerUrlHint:"URL separato per i dati di potenza (usa l'URL di stato se vuoto)",restEnergyUrlHint:"URL separato per i dati di energia (usa l'URL di stato se vuoto)",restEnergyHint:"Ogni valore può usare il proprio URL o ricadere sull'URL di stato. Usa i moltiplicatori per la conversione delle unità (es. 0.001 per convertire Wh in kWh).",testConnection:"Testa connessione",connectionSuccess:"Connessione riuscita",noSwitchesInSwitchbar:"Nessun interruttore nella barra",enableSwitchbarHint:'Abilita "Mostra nella barra interruttori" in Impostazioni > Smart Plugs'},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"E-mail",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"Notifiche email tramite SMTP",telegram:"Notifiche tramite bot Telegram",discord:"Invia a un canale Discord tramite webhook",ntfy:"Notifiche push gratuite e self-hostabili",pushover:"Notifiche push semplici e affidabili",callmebot:"Notifiche WhatsApp gratuite tramite CallMeBot",webhook:"POST HTTP generico verso qualsiasi URL",homeassistant:"Notifiche persistenti nella dashboard di Home Assistant"},lastSuccess:"Ultimo: {{date}}",error:"Errore",printer:"Stampante:",allPrinters:"Tutte le stampanti",sendTestNotification:"Invia notifica di prova",eventSettings:"Impostazioni eventi",enabled:"Abilitato",sendFromProvider:"Invia notifiche da questo provider",printEvents:"Eventi di stampa",printerStatus:"Stato stampante",amsAlarms:"Allarmi AMS",amsHtAlarms:"Allarmi AMS-HT",printQueue:"Coda di stampa",start:"Avvio",plateCheck:"Controllo piatto",complete:"Completato",failed:"Fallito",stopped:"Interrotto",progress:"Avanzamento",offline:"Offline",lowFilament:"Filamento scarso",maintenance:"Manutenzione",amsHumidity:"Umidità AMS",amsTemp:"Temp AMS",amsHtHumidity:"Umidità AMS-HT",amsHtTemp:"Temp AMS-HT",bedCooled:"Piatto raffreddato",firstLayer:"Primo strato",quiet:"Silenzioso",digest:"Riepilogo {{time}}",printStarted:"Stampa avviata",plateNotEmpty:"Piatto non vuoto",plateNotEmptyDescription:"Oggetti rilevati prima della stampa",printCompleted:"Stampa completata",bedCooledLabel:"Piatto raffreddato",bedCooledDescription:"Piatto raffreddato sotto la soglia dopo la stampa",firstLayerCompleteLabel:"Primo strato completato",firstLayerCompleteDescription:"Notifica con foto al termine del primo strato",missingSpoolAssignmentLabel:"Assegnazione bobina mancante",missingSpoolAssignmentDescription:"Notifica quando una stampa parte e i vassoi richiesti non hanno una bobina assegnata",printFailed:"Stampa fallita",printStopped:"Stampa interrotta",progressMilestones:"Traguardi di avanzamento",progressMilestonesDescription:"Notifica al 25%, 50%, 75%",printerOffline:"Stampante offline",printerError:"Errore stampante",lowFilamentLabel:"Filamento scarso",maintenanceDue:"Manutenzione necessaria",maintenanceDueDescription:"Notifica quando è necessaria la manutenzione",amsHumidityHigh:"Umidità AMS elevata",amsHumidityHighDescription:"L'umidità dell'AMS standard supera la soglia",amsTemperatureHigh:"Temperatura AMS elevata",amsTemperatureHighDescription:"La temperatura dell'AMS standard supera la soglia",amsHtHumidityHigh:"Umidità AMS-HT elevata",amsHtHumidityHighDescription:"L'umidità dell'AMS-HT supera la soglia",amsHtTemperatureHigh:"Temperatura AMS-HT elevata",amsHtTemperatureHighDescription:"La temperatura dell'AMS-HT supera la soglia",inventoryAlerts:"Avvisi di inventario",stockReorderAlert:"Avviso di riordino",stockReorderAlertDescription:"Il SKU ha raggiunto il punto di riordino",stockBreakAlert:"Avviso di esaurimento scorte",stockBreakAlertDescription:"Le scorte si esauriranno prima dell'arrivo del rifornimento",jobAdded:"Lavoro aggiunto",jobAddedDescription:"Lavoro aggiunto alla coda",jobAssigned:"Lavoro assegnato",jobAssignedDescription:"Lavoro basato su modello assegnato alla stampante",jobStarted:"Lavoro avviato",jobStartedDescription:"Lavoro in coda avviato per la stampa",jobWaiting:"Lavoro in attesa",jobWaitingDescription:"Lavoro in attesa di filamento o stampante",jobSkipped:"Lavoro saltato",jobSkippedDescription:"Lavoro saltato (precedente fallito)",jobFailed:"Lavoro fallito",jobFailedDescription:"Avvio del lavoro fallito",queueComplete:"Coda completata",queueCompleteDescription:"Tutti i lavori in coda completati",quietHours:"Ore silenziose",noNotificationsDuring:"Nessuna notifica durante queste ore",editProviderToChangeQuietHours:"Modifica il provider per cambiare le ore silenziose",dailyDigest:"Riepilogo giornaliero",batchNotifications:"Raggruppa le notifiche in un unico riepilogo giornaliero",sendAt:"Invia alle {{time}}",editProviderToChangeDigestTime:"Modifica il provider per cambiare l'orario del riepilogo",edit:"Modifica",deleteProvider:"Elimina provider di notifica",deleteConfirm:'Sei sicuro di voler eliminare "{{name}}"? Questa azione non può essere annullata.',delete:"Elimina",addTitle:"Aggiungi provider di notifica",editTitle:"Modifica provider di notifica",nameLabel:"Nome *",namePlaceholder:"Le mie notifiche",providerTypeLabel:"Tipo di provider *",configuration:"Configurazione",testConfiguration:"Testa configurazione",printerFilter:"Filtro stampante",onlyFromPrinter:"Invia notifiche solo per eventi da questa stampante",quietHoursDnd:"Ore silenziose (Non disturbare)",quietStart:"Inizio",quietEnd:"Fine",dailyDigestLabel:"Riepilogo giornaliero",sendDigestAt:"Invia riepilogo alle",digestCollected:"Gli eventi verranno raccolti e inviati come riepilogo unico a quest'ora",notificationEvents:"Eventi di notifica",progressPercent:"(25%, 50%, 75%)",bedCooledAfterPrint:"(dopo il completamento della stampa)",eventPriority:{sectionTitle:"Priorità ntfy",helpNtfy:"Scegli una priorità per ogni evento abilitato. ntfy le usa per intensificare gli avvisi (suono, visibilità, comportamento push). I livelli non impostati qui usano l'impostazione predefinita del server ntfy.",min:"Min.",low:"Bassa",default:"Predefinita",high:"Alta",urgent:"Urgente"},cancel:"Annulla",save:"Salva",add:"Aggiungi",nameRequired:"Il nome è obbligatorio",fieldRequired:"{{field}} è obbligatorio",phoneNumber:"Numero di telefono",apiKey:"Chiave API",serverUrl:"URL del server",topic:"Argomento",authToken:"Token di autenticazione",userKey:"Chiave utente",appToken:"Token applicazione",priority:"Priorità",botToken:"Token del bot",chatId:"ID chat",smtpServer:"Server SMTP",smtpPort:"Porta SMTP",security:"Sicurezza",authentication:"Autenticazione",username:"Nome utente",password:"Password",fromEmail:"Email mittente",toEmail:"Email destinatario",webhookUrl:"URL webhook",payloadFormat:"Formato payload",authorization:"Autorizzazione",titleFieldName:"Nome campo titolo",messageFieldName:"Nome campo messaggio",editTemplate:"Modifica modello: {{name}}",titleLabel:"Titolo",bodyLabel:"Corpo",titlePlaceholder:"Titolo della notifica...",bodyPlaceholder:"Corpo della notifica...",availableVariables:"Variabili disponibili",clickToInsert:"Clicca per inserire alla posizione del cursore nel corpo",livePreview:"Anteprima live",hide:"Nascondi",show:"Mostra",loadingPreview:"Caricamento anteprima...",enterTemplateContent:"Inserisci il contenuto del modello per vedere l'anteprima",titlePreview:"Titolo:",bodyPreview:"Corpo:",resetToDefault:"Ripristina predefinito",titleRequired:"Il titolo è obbligatorio",bodyRequired:"Il corpo è obbligatorio",notificationLog:"Registro notifiche",showFailedOnly:"Solo fallite",last24Hours:"Ultime 24 ore",last7Days:"Ultimi 7 giorni",last30Days:"Ultimi 30 giorni",last90Days:"Ultimi 90 giorni",justNow:"Proprio ora",noFailedNotifications:"Nessuna notifica fallita",noNotificationsLogged:"Nessuna notifica registrata",unknownProvider:"Provider sconosciuto",logTitle:"Titolo",logMessage:"Messaggio",logError:"Errore",logProvider:"Provider: {{type}}",logTime:"Ora: {{time}}",refresh:"Aggiorna",clearOld:"Cancella vecchie",statsSummary:"Ultimi {{days}} giorni:",statsNotifications:"notifiche",statsSent:"{{count}} inviate",statsFailed:"{{count}} fallite",eventTypes:{print_start:"Stampa avviata",print_complete:"Stampa completata",print_failed:"Stampa fallita",print_stopped:"Stampa interrotta",print_progress:"Avanzamento",printer_offline:"Stampante offline",printer_error:"Errore stampante",filament_low:"Filamento scarso",maintenance_due:"Manutenzione necessaria",test:"Prova"},userEmail:{title:"Notifiche",emailNotifications:"Notifiche via e-mail",emailNotificationsDesc:"Ricevi notifiche via e-mail per i tuoi lavori di stampa. Le e-mail vengono inviate tramite le impostazioni SMTP configurate nell'autenticazione avanzata.",sendingTo:"Le notifiche verranno inviate a",noEmailWarning:"Il tuo account non ha un indirizzo e-mail. Contatta un amministratore per aggiungerne uno.",printJobNotifications:"Notifiche lavori di stampa",printJobNotificationsDesc:"Scegli quali eventi attivano le notifiche e-mail per i lavori di stampa che invii.",printJobStarts:"Inizio lavoro di stampa",printJobStartsDesc:"Ricevi una notifica quando il tuo lavoro di stampa inizia.",printJobFinishes:"Fine lavoro di stampa",printJobFinishesDesc:"Ricevi una notifica quando il tuo lavoro di stampa si completa correttamente.",printErrors:"Errori di stampa",printErrorsDesc:"Ricevi una notifica quando il tuo lavoro di stampa fallisce o incontra un errore.",printJobStops:"Lavoro di stampa interrotto",printJobStopsDesc:"Ricevi una notifica quando il tuo lavoro di stampa viene annullato o interrotto.",saveSuccess:"Preferenze di notifica salvate.",saveError:"Impossibile salvare le preferenze di notifica."}},richTextEditor:{bold:"Grassetto",italic:"Corsivo",underline:"Sottolineato",bulletList:"Elenco puntato",numberedList:"Elenco numerato",alignLeft:"Allinea a sinistra",alignCenter:"Allinea al centro",alignRight:"Allinea a destra",addLink:"Aggiungi link",removeLink:"Rimuovi link"},externalLinks:{noLinksConfigured:"Nessun link esterno configurato",deleteLink:"Elimina link",removeCustomIcon:"Rimuovi icona personalizzata",openInNewTab:"Apri in nuova scheda",placeholders:{linkName:"Il mio link"}},keyboardShortcuts:{title:"Scorciatoie da tastiera",navigation:"Navigazione",archivesSection:"Archivi",kProfilesSection:"Profili K",generalSection:"Generale",shortcuts:{goToPrinters:"Vai a Stampanti",goToArchives:"Vai ad Archivi",goToQueue:"Vai a Coda",goToStats:"Vai a Statistiche",goToProfiles:"Vai a Profili cloud",goToSettings:"Vai a Impostazioni",focusSearch:"Vai alla ricerca",openUploadModal:"Apri finestra di caricamento",clearSelection:"Cancella selezione / deseleziona input",contextMenu:"Menu contestuale sulle schede",refreshProfiles:"Aggiorna profili",newProfile:"Nuovo profilo",exitSelectionMode:"Esci dalla modalità selezione",showHelp:"Mostra questa guida"},footer:"Premi Esc o clicca fuori per chiudere"},notificationLog:{title:"Registro notifiche",events:{printStarted:"Stampa avviata",printComplete:"Stampa completata",printFailed:"Stampa fallita",printStopped:"Stampa interrotta",progress:"Avanzamento",printerOffline:"Stampante offline",printerError:"Errore stampante",lowFilament:"Filamento in esaurimento",maintenanceDue:"Manutenzione in scadenza",test:"Test"},timeAgo:{justNow:"Adesso",minutesAgo:"{{minutes}} min fa",hoursAgo:"{{hours}} ore fa"}},restoreBackup:{title:"Ripristina backup",restoring:"Ripristino...",restoreComplete:"Ripristino completato",restoreFailed:"Ripristino fallito",importSettings:"Importa impostazioni da un file di backup",pleaseWait:"Attendere il ripristino dei dati",clickToSelect:"Clicca per selezionare il file di backup (.json o .zip)",howDuplicateHandling:"Come funziona la gestione dei duplicati:",categories:{printers:"Stampanti",smartPlugs:"Prese smart",notificationProviders:"Provider di notifica",filaments:"Filamenti",archives:"Archivi",pendingUploads:"Caricamenti in sospeso",settingsTemplates:"Impostazioni e modelli"},matchingInfo:{printers:"abbinati per numero di serie",smartPlugs:"abbinati per indirizzo IP",notificationProviders:"abbinati per nome",filaments:"abbinati per nome + tipo + marca",archives:"abbinati per hash del contenuto",pendingUploads:"abbinati per nome file",settingsTemplates:"sempre sovrascritti"},replaceExisting:"Sostituisci dati esistenti",keepExisting:"Mantieni dati esistenti",replaceDescription:"Sovrascrivi gli elementi già esistenti con i dati del backup",keepDescription:"Ripristina solo gli elementi che non esistono già",caution:"Attenzione:",cautionText:"La sovrascrittura sostituirà le configurazioni attuali con i dati del backup. I codici di accesso delle stampanti non vengono mai sovrascritti per sicurezza.",itemsRestored:"Elementi ripristinati",itemsSkipped:"Elementi saltati",restored:"Ripristinati",skipped:"Saltati (già esistenti)",filesLabel:"File (3MF, miniature, ecc.)",newApiKeysGenerated:"Nuove chiavi API generate",newApiKeysWarning:"Queste chiavi vengono mostrate una sola volta. Copiale adesso!",processingBackup:"Elaborazione file di backup...",noDataFound:"Nessun dato trovato da ripristinare nel file di backup.",failedToRestore:"Impossibile ripristinare il backup. Verificare il formato del file."},backupExport:{title:"Esporta backup",selectData:"Seleziona i dati da includere",selectAll:"Seleziona tutto",selectNone:"Deseleziona tutto",categoryDescriptions:{settings:"Lingua, tema, preferenze di aggiornamento",notifications:"ntfy, Pushover, Discord, ecc.",templates:"Modelli di messaggi personalizzati",smartPlugs:"Configurazioni prese Tasmota",externalLinks:"Link della barra laterale a servizi esterni",printers:"Info stampanti (codici di accesso esclusi)",plateDetection:"Immagini di riferimento piatto vuoto",filaments:"Tipi di filamento e costi",maintenance:"Programmi di manutenzione personalizzati",archives:"Tutti i dati di stampa + file (3MF, miniature, foto)",projects:"Progetti, elementi BOM e allegati",pendingUploads:"Caricamenti della stampante virtuale in attesa di revisione",apiKeys:"Chiavi API webhook (nuove chiavi generate all'importazione)"},requiresPrinters:"Richiede la selezione di Stampanti",zipFileWarning:"Verrà creato un file ZIP.",zipFileDescription:"Include tutti i file 3MF, miniature, timelapse e foto. Potrebbe richiedere tempo e produrre un file di grandi dimensioni.",includeAccessCodes:"Includi codici di accesso",includeAccessCodesDescription:"Per il trasferimento su un'altra macchina",includeAccessCodesWarning:"I codici di accesso saranno inclusi in testo semplice. Mantieni sicuro questo file di backup!",categoriesSelected:"{{selectedCount}} categorie selezionate"},pendingUploads:{placeholders:{notes:"Aggiungi note su questa stampa..."},discardUpload:"Scarta caricamento",archiveAllUploads:"Archivia tutti i caricamenti",discardAllUploads:"Scarta tutti i caricamenti",archive:"Archivia",timeAgo:{justNow:"Adesso",minutesAgo:"{{minutes}} min fa",hoursAgo:"{{hours}} ore fa",daysAgo:"{{days}} giorni fa"}},apiBrowser:{placeholders:{requestBody:"Corpo della richiesta JSON...",searchEndpoints:"Cerca endpoint..."}},configureAmsSlot:{title:"Configura Slot AMS",slotConfigured:"Slot configurato!",configuringSlot:"Configurazione slot:",slotLabel:"{{ams}} – Slot {{slot}}",searchPresets:"Cerca preset...",colorPlaceholder:"Nome colore o hex (es. marrone, FF8800)",clearCustomColor:"Cancella colore personalizzato",noCloudPresets:"Nessun preset cloud. Accedi a Bambu Cloud per sincronizzare.",noPresetsAvailable:"Nessun preset disponibile. Accedi a Bambu Cloud o importa profili locali.",noMatchingPresets:"Nessun preset corrispondente trovato.",custom:"Personalizzato",builtin:"Integrato",settingsSentToPrinter:"Impostazioni inviate alla stampante",filamentProfile:"Profilo filamento",kProfileLabel:"Profilo K (Pressure Advance)",filteringFor:"Filtrando per: {{material}}",noKProfile:"Nessun profilo K (usa predefinito 0.020)",noMatchingKProfiles:"Nessun profilo K corrispondente. Verrà usato K=0.020 predefinito.",selectFilamentFirst:"Seleziona prima un profilo filamento",kFromCalibration:"K={{value}} dalla calibrazione stampante",customColorLabel:"Colore personalizzato (opzionale)",presetColors:"Colori {{name}}:",showLessColors:"Mostra meno colori",showMoreColors:"Mostra più colori",clear:"Cancella",hexLabel:"Hex – #{{hex}}",resetting:"Ripristino...",resetSlot:"Ripristina slot",cancel:"Annulla",configuring:"Configurazione...",configureSlot:"Configura slot"},githubBackup:{title:"Backup Git",history:"Cronologia",downloadBackup:"Scarica backup",restoreBackup:"Ripristina backup",noBackupsYet:"Nessun backup ancora"},emailSettings:{placeholders:{fromName:"Bambuddy"}},tagManagement:{searchTags:"Cerca tag...",renameTag:"Rinomina tag",deleteTag:"Elimina tag"},notificationTemplates:{placeholders:{title:"Titolo notifica...",body:"Corpo notifica..."}},batchTag:{placeholders:{newTag:"Inserisci nuovo tag..."}},photoGallery:{deletePhoto:"Elimina foto"},filamentHoverCard:{copySpoolUuid:"Copia UUID bobina"},kProfilesView:{hasNote:"Ha una nota",copyProfile:"Copia profilo"},layout:{openMenu:"Apri menu",noPermissionSystemInfo:"Non hai il permesso di visualizzare le informazioni di sistema"},dashboard:{dragToReorder:"Trascina per riordinare",hideWidget:"Nascondi widget"},notificationProviderCard:{deleteNotificationProvider:"Elimina provider di notifica"},fileManagerModal:{closeFileManager:"Chiudi gestore file",sortFiles:"Ordina file",goToParentFolder:"Vai alla cartella superiore",threeView:"Vista 3D"},embeddedCameraViewer:{refreshStream:"Aggiorna stream",close:"Chiudi",zoomOut:"Rimpicciolisci",resetZoom:"Reimposta zoom",zoomIn:"Ingrandisci",dragToResize:"Trascina per ridimensionare"},timelapseViewer:{skipBack5s:"Indietro 5s",skipForward5s:"Avanti 5s"},notificationProviders:{descriptions:{email:"Notifiche email via SMTP",telegram:"Notifiche tramite bot Telegram",discord:"Invia a canale Discord tramite webhook",ntfy:"Notifiche push gratuite e self-hostabili",pushover:"Notifiche push semplici e affidabili",callmebot:"Notifiche WhatsApp gratuite tramite CallMeBot",webhook:"POST HTTP generico a qualsiasi URL"}},logViewer:{searchPlaceholder:"Cerca messaggio o nome logger...",noLogEntries:"Nessuna voce di log trovata"},switchbarPopover:{noSwitchesInSwitchbar:"Nessun interruttore nella barra"},projectPageModal:{placeholders:{title:"Titolo",designer:"Designer",license:"Licenza",description:"Inserisci descrizione...",profileTitle:"Titolo profilo",profileDescription:"Descrizione profilo..."}},spoolmanSettings:{},time:{unknown:"-",waiting:"In attesa",justNow:"Proprio ora",now:"Ora",minsAgo:"{{count}}m fa",inMins:"tra {{count}}m",hoursAgo:"{{count}}h fa",inHours:"tra {{count}}h",daysAgo:"{{count}}g fa",inDays:"tra {{count}}g"},spoolbuddy:{nav:{dashboard:"Dashboard",ams:"AMS",inventory:"Inventario",writeTag:"Scrivi",settings:"Impostazioni"},status:{nfcReady:"NFC pronto",nfcOff:"NFC spento",offline:"Offline",online:"Online",noPrinters:"Nessuna stampante",deviceOffline:"Dispositivo offline",waitingConnection:"In attesa della connessione...",systemReady:"Sistema pronto",status:"Stato"},dashboard:{readyToScan:"Pronto per la scansione",idleMessage:"Posiziona una bobina sulla bilancia per identificarla",nfcHint:"Il tag NFC verrà letto automaticamente",device:"Dispositivo",syncWeight:"Sincronizza peso",weightSynced:"Sincronizzato!",unknownTag:"Tag sconosciuto",newTag:"Nuovo tag rilevato",onScale:"sulla bilancia",linkSpool:"Collega a bobina",linkTagTitle:"Collega tag a bobina",linkTag:"Collega tag",selectSpool:"Seleziona una bobina da collegare a questo tag:",noUntagged:"Nessuna bobina senza tag trovata",tagDetected:"Tag rilevato",noTag:"Nessun tag",tagId:"Etichetta",grossWeight:"Peso lordo",spoolSize:"Dimensione bobina",close:"Chiudi",currentSpool:"Bobina attuale",plateReady:"Piatto pronto: {{name}}",plateReadyLabel:"Piatti da liberare",plateClearAction:"Libera",plateClearedToast:"Piatto contrassegnato come liberato",plateClearFailed:"Impossibile contrassegnare il piatto come liberato"},modal:{spoolDetected:"Bobina rilevata",assignToAms:"Assegna all'AMS",syncWeight:"Sincronizza peso",weightSynced:"Sincronizzato!",syncing:"Sincronizzazione...",newTagDetected:"Nuovo tag rilevato",addToInventory:"Aggiungi all'inventario",assignToAmsTitle:"Assegna all'AMS",selectSlot:"Seleziona uno slot",assign:"Assegna",assigning:"Assegnazione...",assignSuccess:"Assegnato!",assignPendingInsert:"Assegnato. Lo slot verrà configurato all'inserimento della bobina.",assignError:"Impossibile assegnare la bobina. Riprovare.",noPrinterSelected:"Seleziona una stampante...",noAmsDetected:"Nessun AMS rilevato su questa stampante",slot:"Slot"},weight:{noReading:"Nessuna lettura",stable:"Stabile",measuring:"Misurazione...",tare:"Tara",calibrate:"Calibra"},spool:{remaining:"Rimanente",material:"Materiale",brand:"Marca",color:"Colore",coreWeight:"Nucleo",labelWeight:"Etichetta",scaleWeight:"Bilancia",netWeight:"Netto",lastUsed:"Ultimo utilizzo"},ams:{noData:"Nessun AMS rilevato",connectAms:"Collega un AMS per vedere gli slot",noPrinter:"Nessuna stampante selezionata",selectPrinter:"Seleziona una stampante dalla barra superiore",printerDisconnected:"Stampante disconnessa",humidity:"Umidità",level:"Livello",active:"Attivo",slot:"Slot",empty:"Vuoto"},inventory:{search:"Cerca bobine...",empty:"Nessuna bobina nell'inventario",noResults:"Nessuna bobina corrispondente",spools:"bobine",addSpool:"Aggiungi bobina"},settings:{tabDevice:"Dispositivo",tabDisplay:"Display",tabScale:"Bilancia",tabUpdates:"Aggiornamenti",nfcReader:"Lettore NFC",type:"Tipo",connection:"Connessione",notConnected:"N/D",deviceInfo:"Info dispositivo",hostname:"Host",uptime:"Tempo di attività",brightness:"Luminosità",saved:"Salvato",noBacklight:"Nessuna retroilluminazione DSI rilevata. Il controllo luminosità richiede un display DSI.",screenBlank:"Timeout spegnimento schermo",screenBlankDesc:"Lo schermo si spegne dopo inattività. Tocca per riattivare.",displayNote:"La luminosità viene applicata come filtro software.",scaleCalibration:"Calibrazione bilancia",currentWeight:"Peso attuale",tareOffset:"Tara",calFactor:"Fattore",knownWeight:"Peso noto",calStep1:"Rimuovere tutto dalla bilancia e premere Imposta zero.",calStep2:"Posizionare il peso noto sulla bilancia.",setZero:"Imposta zero",calibrateNow:"Calibra",calibrated:"Calibrato",tareSet:"Comando tara inviato. In attesa del dispositivo...",tareComplete:"Tara completata!",tareTimedOut:"Tempo scaduto per la tara — il demone SpoolBuddy è in esecuzione?",tareFailed:"Invio comando tara fallito",zeroSet:"Punto zero impostato. Posizionare il peso noto sulla bilancia.",calibrationDone:"Calibrazione completata!",calibrationFailed:"Calibrazione fallita",lastCalibrated:"Ultima calibrazione",stable:"Stabile",settling:"Stabilizzazione...",firmware:"Firmware",scale:"Bilancia",noDevice:"Nessun dispositivo SpoolBuddy trovato",daemonVersion:"Versione daemon",currentVersion:"Attuale",versionPending:"In attesa del daemon...",checking:"Verifica...",checkUpdates:"Verifica aggiornamenti",updateAvailable:"Aggiornamento disponibile",updateInstructions:"Aggiorna via SSH: esegui lo script di installazione SpoolBuddy.",upToDate:"Aggiornato",includeBeta:"Includi versioni beta",systemConfig:"Backend & autenticazione",backendUrl:"URL backend Bambuddy",apiToken:"Token API",apiTokenPlaceholder:"Inserisci token API",saveConfig:"Salva configurazione",systemQueued:"Configurazione in coda.",systemFieldsRequired:"L'URL del backend è obbligatorio.",nfcDiagnostic:"Diagnostica NFC",scaleDiagnostic:"Diagnostica bilancia",readTagDiagnostic:"Diagnostica lettura tag",testNfc:"Test lettore",testScale:"Test precisione",testReadTag:"Leggi tag"},writeTag:{tabExisting:"Bobina esistente",tabNew:"Nuova bobina",tabReplace:"Sostituisci tag",searchPlaceholder:"Cerca per materiale, colore, marca...",noUntaggedSpools:"Nessuna bobina senza tag",noTaggedSpools:"Nessuna bobina con tag",selectSpool:"Seleziona una bobina, poi posiziona un NTAG sul lettore",placeTag:"Posiziona un NTAG sul lettore",tagReady:"Tag rilevato — pronto per la scrittura",writeTag:"Scrivi tag",replaceTag:"Sostituisci tag",writing:"Scrittura tag...",waiting:"In attesa di SpoolBuddy...",writeSuccess:"Tag scritto con successo!",writeFailed:"Scrittura fallita",queueFailed:"Impossibile accodare il comando di scrittura",tryAgain:"Riprova",cancel:"Annulla",replaceWarning:"Il vecchio tag verrà scollegato. Il nuovo tag lo sostituirà.",deviceOffline:"SpoolBuddy è offline",material:"Materiale",colorName:"Nome colore",color:"Colore",brand:"Marca",weight:"Peso (g)",createSpool:"Crea bobina",creating:"Creazione...",spoolCreated:"Bobina creata! Pronto per la scrittura.",createFailed:"Impossibile creare la bobina",incompleteDataWarning:"Tag scritto con dati Spoolman incompleti"},quickMenu:{printerPower:"Alimentazione stampante",systemControls:"Sistema",restartDaemon:"Riavvia daemon",restartBrowser:"Riavvia browser",reboot:"Riavvia",shutdown:"Spegni",swipeToClose:"Scorri verso il basso per chiudere",confirmTitle:"Conferma",confirmShutdown:"Sei sicuro di voler spegnere lo SpoolBuddy? Avrai bisogno di accesso fisico per riaccenderlo.",confirmReboot:"Sei sicuro di voler riavviare lo SpoolBuddy?",confirmRestartDaemon:"Riavviare il daemon SpoolBuddy? NFC e bilancia saranno temporaneamente non disponibili.",confirmRestartBrowser:"Riavviare il browser kiosk? Lo schermo diventerà brevemente nero.",confirm:"Conferma",confirmPlugOn:"Accendere {{name}}?",confirmPlugOff:"Spegnere {{name}}?",turnOn:"Accendi",turnOff:"Spegni"}},diagnostic:{modalTitle:"Diagnostica connessione — {{name}}",running:"Diagnostica in corso...",runningElapsed:"Diagnostica in corso... ({{elapsed}}s)",waitingForReportHint:"In attesa che la stampante pubblichi un report di stato — può richiedere fino a {{max}} secondi.",runFailed:"Impossibile eseguire la diagnostica: {{error}}",retry:"Esegui di nuovo",runButton:"Esegui diagnostica",sectionTitle:"Diagnostica connessione",sectionDescription:"Verifica perché una stampante non si connette o non stampa — raggiungibilità delle porte, modalità sviluppatore LAN, modalità di rete Docker e credenziali.",noPrinters:"Nessuna stampante configurata.",overall:{ok:"Nessun problema rilevato — la connessione della stampante sembra a posto.",warnings:"La stampante dovrebbe funzionare, ma alcuni aspetti richiedono attenzione.",problems:"Sono stati rilevati problemi che spiegano perché la stampante non si connette o non stampa."},check:{port_mqtt:{title:"Porta di controllo (MQTT 8883)",pass:"Raggiungibile — la stampante accetta connessioni di controllo.",fail:"La porta 8883 non è raggiungibile. La stampante è spenta, ha un altro indirizzo IP oppure un firewall la blocca. Verifica l'IP della stampante e che nulla blocchi la porta 8883."},port_ftps:{title:"Porta trasferimento file (FTPS 990)",pass:"Raggiungibile — l'invio dei file di stampa funzionerà.",warn:"La porta 990 non è raggiungibile. Il monitoraggio potrebbe ancora funzionare, ma l'invio delle stampe alla stampante fallirà. Assicurati che la porta 990 non sia bloccata."},port_rtsps:{title:"Porta fotocamera (RTSPS 322)",pass:"Raggiungibile — lo streaming della fotocamera funzionerà.",warn:"La porta 322 non è raggiungibile. La visualizzazione live della fotocamera non funzionerà. Questo non influisce sulla stampa."},network_mode:{title:"Modalità di rete Docker",pass:"In esecuzione in modalità di rete host.",warn:'Bambuddy è in esecuzione con la rete Docker bridge. Il rilevamento delle stampanti e la stampante virtuale richiedono la modalità di rete host — ricrea il container con "network_mode: host".',skip:"Non in esecuzione in Docker — non applicabile."},subnet:{title:"Sottorete",pass:"La stampante e Bambuddy sono nella stessa sottorete.",warn:"La stampante ({{printer_ip}}) e Bambuddy ({{host_ip}}) sono in sottoreti diverse. Potrebbero non raggiungersi a meno che non sia configurato il routing tra le sottoreti.",skip:"Impossibile determinare la sottorete — ignorato."},mqtt_auth:{title:"Credenziali stampante",pass:"La stampante ha accettato la connessione.",fail:"La stampante è raggiungibile ma ha rifiutato la connessione. Il codice di accesso o il numero di serie è molto probabilmente errato. Il codice di accesso cambia ogni volta che la modalità sviluppatore viene attivata/disattivata — ricopialo dallo schermo della stampante.",skip:"Non verificato — impossibile raggiungere la stampante."},developer_mode:{title:"Modalità sviluppatore LAN",pass:"La modalità sviluppatore è attivata.",fail:"La modalità sviluppatore è DISATTIVATA sulla stampante. Attivala nelle impostazioni LAN della stampante — e conferma con OK. Senza di essa le stampe non verranno avviate.",skip:"Impossibile verificare — richiede una connessione attiva alla stampante."},printer_publishing:{title:"La stampante pubblica lo stato",pass:"La stampante sta pubblicando aggiornamenti di stato — AMS, filamenti e profili K saranno correttamente replicati nello slicer.",fail:"Il broker MQTT ha accettato la connessione ma la stampante non ha pubblicato alcun report di stato. È quasi sempre un numero di serie errato o con maiuscole/minuscole sbagliate — il topic device/<serial>/report distingue tra maiuscole e minuscole. Confronta il numero di serie nelle impostazioni della stampante con quello mostrato sullo schermo del dispositivo.",skip:"Impossibile verificare — richiede una connessione attiva alla stampante."}}},systemHealth:{sectionTitle:"Stato del sistema",sectionDescription:"Analizza i log recenti alla ricerca di problemi noti che di solito puoi risolvere da solo, prima che diventino un ticket di assistenza.",rescan:"Analizza di nuovo",clean:"Nessun problema noto trovato nelle ultime {{times}} voci di log.",logUnavailable:"La registrazione su file è disattivata, quindi i log non possono essere analizzati. Attiva la registrazione su file per usare questo controllo.",learnMore:"Come risolvere",fixLabel:"Soluzione:",occurrences:"Visto {{times}}× — ultima volta alle {{lastSeen}}",category:{layer8:"Puoi risolverlo tu",environment:"Ambiente",bug:"Segnalalo, per favore"},signature:{"ftp-auth-rejected":{name:"La stampante ha rifiutato il codice di accesso",cause:"La stampante ha rifiutato l'accesso per il trasferimento file. Il codice di accesso è errato oppure è cambiato dopo aver attivato la Modalità Sviluppatore.",fix:"Ricopia il codice di accesso dallo schermo della stampante (impostazioni LAN) e aggiornalo nelle impostazioni della stampante in Bambuddy."},"ftp-connection-timeout":{name:"Timeout della connessione di trasferimento file",cause:"Bambuddy non è riuscito a raggiungere la porta di trasferimento file della stampante (FTPS 990). La porta è bloccata, oppure la stampante è spenta o in un'altra sottorete.",fix:"Assicurati che nulla blocchi la porta 990 tra Bambuddy e la stampante e che entrambi siano sulla stessa rete."},"ftp-ssl-error":{name:"Handshake sicuro del trasferimento file non riuscito",cause:"L'handshake TLS con il server di trasferimento file della stampante non è riuscito. Spesso è dovuto a un firewall o a un firmware della stampante obsoleto.",fix:"Aggiorna il firmware della stampante e verifica che nessun firewall o proxy intercetti la connessione sulla porta 990."},"mqtt-connection-flapping":{name:"La connessione alla stampante cade di continuo",cause:"La connessione di controllo (MQTT 8883) si disconnette e si riconnette ripetutamente, di solito per una rete debole o una porta parzialmente bloccata.",fix:"Controlla il segnale Wi-Fi vicino alla stampante, preferisci una connessione cablata e assicurati che la porta 8883 sia raggiungibile in modo affidabile."},"camera-connection-refused":{name:"Flusso della telecamera non raggiungibile",cause:"Non è stato possibile raggiungere la telecamera dal vivo sulla porta RTSPS 322. La porta è bloccata, oppure la telecamera o la visione dal vivo via LAN è disattivata sulla stampante.",fix:"Attiva la telecamera e la visione dal vivo via LAN sulla stampante e assicurati che la porta 322 non sia bloccata. Questo non influisce sulla stampa."},"database-locked":{name:"Conflitti di scrittura nel database",cause:'Il database SQLite presenta errori "database is locked" sotto carico, comune quando si usano più stampanti contemporaneamente.',fix:"Passa Bambuddy a un database PostgreSQL esterno. Consulta la guida PostgreSQL nella documentazione."}}},vpDiagnostic:{title:"Controllo configurazione — {{name}}",runButton:"Esegui controllo configurazione",running:"Controllo configurazione in corso...",runFailed:"Impossibile eseguire il controllo della configurazione: {{error}}",retry:"Esegui di nuovo",overall:{ok:"Tutti i controlli superati — questa stampante virtuale è configurata correttamente.",warnings:"La stampante virtuale dovrebbe funzionare, ma alcuni aspetti richiedono attenzione.",problems:"Sono stati trovati problemi che spiegano perché lo slicer non riesce a vedere o usare questa stampante virtuale."},check:{enabled:{title:"Stampante virtuale abilitata",fail:"Questa stampante virtuale è spenta. Attivala per renderla rilevabile."},running:{title:"Servizi in esecuzione",fail:"La stampante virtuale è abilitata ma i suoi servizi non sono in esecuzione. Controlla il log di Bambuddy — di solito li ferma un conflitto di IP di binding o un errore di permessi."},bind_interface:{title:"Interfaccia di rete di binding",fail:`L'interfaccia di binding non è impostata o non esiste più su questo host. Scegli un'interfaccia attuale nel menu "Interfaccia di binding".`},access_code:{title:"Codice di accesso impostato",fail:"Nessun codice di accesso impostato. Allo slicer deve essere fornito lo stesso codice di accesso di 8 caratteri impostato qui."},target_printer:{title:"Stampante di destinazione",fail:"Nessuna stampante di destinazione selezionata. La modalità proxy richiede una stampante reale a cui inoltrare.",warn:"La stampante di destinazione è offline in questo momento — l'inoltro riprenderà quando si riconnetterà."},port_ftps:{title:"Servizio di caricamento file (porta {{port}})",fail:"Nulla è in ascolto sulla porta {{port}} dell'IP di binding, quindi lo slicer non può caricare i file. La causa abituale è un conflitto di porta su questa interfaccia."},port_mqtt:{title:"Servizio di controllo (porta {{port}})",fail:"Nulla è in ascolto sulla porta {{port}} dell'IP di binding, quindi lo slicer non può connettersi o mostrare lo stato."},port_bind:{title:"Servizio di rilevamento (porta {{port}})",fail:"Nulla è in ascolto sulla porta {{port}} dell'IP di binding, quindi l'handshake di rilevamento dello slicer fallisce."},certificate:{title:"Certificato TLS",pass:"Certificato pronto. Assicurati che il certificato CA di Bambuddy (sopra) sia importato nell'archivio attendibile del tuo slicer.",fail:"Il certificato TLS per questa stampante virtuale è mancante. Verifica che la directory dei dati di Bambuddy sia scrivibile."}}},bugReport:{logHealthSummary:"Trovati problemi noti nei tuoi log",logHealthIntro:"I log recenti corrispondono a problemi noti. Controlla le soluzioni qui sotto: risolverle potrebbe sistemare il problema senza una segnalazione di bug. Puoi comunque inviare una segnalazione qui sotto.",title:"Segnala un bug",description:"Descrizione",descriptionPlaceholder:"Cosa è andato storto? Descrivi il problema...",email:"Email (opzionale)",emailPlaceholder:"tua@email.it",emailPrivacy:"Se fornita, la tua email sarà inclusa in una sezione compressa dell'issue GitHub per permettere al manutentore di contattarti.",screenshot:"Schermata",uploadOrPaste:"Carica, incolla o trascina un'immagine",dataCollectedSummary:"Quali dati sono inclusi nel report?",dataIncluded:"Inclusi:",dataIncludedList:"Versione app, OS, architettura, versione Python, statistiche database (solo conteggi), modelli stampante, numero ugelli, versioni firmware, stato connessione, stato integrazioni (Spoolman, MQTT, HA), impostazioni non sensibili, conteggio interfacce di rete, dettagli Docker, versioni dipendenze.",dataNeverIncluded:"Mai inclusi:",dataNeverIncludedList:"Nomi stampanti, numeri di serie, codici di accesso, password, indirizzi IP, indirizzi email, chiavi API, token, URL webhook, nomi host o nomi utente.",submit:"Invia",startLogging:"Avvia registrazione debug",stepEnableLogging:"Registrazione debug attivata",stepReproduce:"Riproduci il problema ora",stepStopLogging:"Ferma & invia rapporto",stopAndSubmit:"Ferma & Invia",maxDuration:"Arresto automatico dopo {{minutes}} min",stoppingLogs:"Raccolta log & invio...",submitting:"Invio segnalazione bug...",submittingStepConnection:"Controlli di connettività delle stampanti in corso",submittingStepVirtualPrinters:"Controlli di configurazione delle stampanti virtuali in corso",submittingStepLogScan:"Analisi dei log recenti per problemi noti",submittingStepSubmit:"Invio del report a GitHub",submitSuccess:"Segnalazione bug inviata con successo!",submitFailed:"Impossibile inviare la segnalazione bug",diagnosticChecking:"Verifica delle connessioni delle stampanti...",diagnosticHealthy:"Verifica della connessione superata — nessun problema rilevato sulle tue stampanti.",diagnosticSummary:"{{problems}} stampanti su {{total}} hanno problemi di connessione",diagnosticIntro:"Una o più stampanti hanno un problema di connessione che potrebbe essere la causa del tuo problema. Espandi una stampante qui sotto per vedere la soluzione — risolverla potrebbe sistemare il problema senza una segnalazione di bug. Puoi comunque inviare una segnalazione qui sotto.",thankYou:"Grazie!",submitted:"La tua segnalazione bug è stata inviata.",viewIssue:"Vedi issue",unexpectedError:"Si è verificato un errore imprevisto"},failureDetection:{title:"Rilevamento guasti con IA",description:"Monitora le stampe tramite un'API ML Obico auto-ospitata e agisce automaticamente sui guasti rilevati.",mlUrl:"URL API ML Obico",mlUrlHint:"URL base del tuo container Obico ml_api auto-ospitato (es. http://192.168.1.10:3333).",test:"Prova",testSuccess:"API ML raggiungibile e funzionante.",testFailed:"Impossibile raggiungere l'API ML.",sensitivity:"Sensibilità",sensitivityLow:"Bassa (meno falsi positivi)",sensitivityMedium:"Media (bilanciata)",sensitivityHigh:"Alta (rilevamento precoce, più falsi positivi)",sensitivityHint:"Regola le soglie di confidenza che attivano avvisi e guasti.",action:"Azione al guasto rilevato",actionNotify:"Solo notifica",actionPause:"Metti in pausa",actionPauseOff:"Pausa e stacca corrente",pollInterval:"Intervallo di controllo (secondi)",pollIntervalHint:"Frequenza di controllo di ogni stampante durante la stampa. Minimo 5s, massimo 120s.",externalUrlMissing:"URL esterno non impostato.",externalUrlHint:"L'API ML recupera l'istantanea della telecamera tramite URL. Imposta l'URL esterno nelle impostazioni generali in modo che il container API ML possa raggiungere Bambuddy.",perPrinterTitle:"Stampanti monitorate",perPrinterHint:"Scegli quali stampanti il servizio di rilevamento deve monitorare.",monitorAll:"Monitora tutte le stampanti connesse",statusTitle:"Stato",serviceRunning:"Servizio in esecuzione",thresholds:"Soglie bassa / alta",activePrinters:"Stampe attive",noActivePrints:"Nessuna stampa in corso.",historyTitle:"Rilevamenti recenti",noHistory:"Nessun rilevamento finora."},makerworld:{title:"MakerWorld",description:"Incolla un URL di un modello MakerWorld per importarlo e stamparlo direttamente da Bambuddy — senza passare dall'app Bambu Handy.",pasteUrlHeader:"Importa da MakerWorld",pasteUrlPlaceholder:"https://makerworld.com/en/models/… o incolla qualsiasi link MakerWorld",resolveButton:"Risolvi",signInRequiredTitle:"Accesso Bambu Cloud richiesto per scaricare",signInRequiredBody:"Puoi consultare i dettagli del modello in modo anonimo, ma MakerWorld richiede un account Bambu Cloud per scaricare i file 3MF.",openCloudSettings:"Apri impostazioni Cloud",untitledModel:"Modello senza titolo",byCreator:"di {{name}}",downloadsCount:"{{count}} download",licensePrefix:"Licenza",alreadyImported:"Già nella libreria",openOnMakerworld:"Apri su MakerWorld",alreadyInLibrary:"Questo modello è già nella tua libreria — lo trovi in Gestione file → MakerWorld",importSuccess:"{{filename}} importato — salvato in Gestione file → MakerWorld",platesHeader:"Piatti ({{count}})",plateDefaultName:"Piatto {{n}}",materialCount:"{{count}} filamenti",amsRequired:"AMS richiesto",slicedFor:"Sezionato per {{printer}}",alsoCompatible:"Anche contrassegnato come compatibile: {{printers}}",importToLibrary:"Salva",sliceIn:"Salva e affetta in {{slicer}}",disclaimer:"L'integrazione MakerWorld utilizza endpoint API documentati dalla community. Bambuddy non è affiliato né approvato da MakerWorld o Bambu Lab.",lastImportSuccess:"Importato nella tua libreria",lastImportAlreadyInLibrary:"Già nella tua libreria",viewInLibrary:"Visualizza in Gestione file",openInBambuStudio:"Apri in Bambu Studio",openInOrcaSlicer:"Apri in OrcaSlicer",importTo:"Importa in Gestione file",recentImportsHeader:"Importazioni recenti",phaseResolving:"Risoluzione",phaseDownloading:"Download",folderAuto:"MakerWorld (predefinita)",importAll:"Importa tutto",importAllProgress:"Importazione {{current}}/{{total}}",openGallery:"Apri galleria immagini",galleryPrev:"Immagine precedente",galleryNext:"Immagine successiva",deleteImport:"Rimuovi dalla libreria",importDeleting:"Rimozione…",importDeleted:"Rimosso dalla libreria",confirmDelete:"Rimuovere {{filename}} dalla libreria? Il file locale verrà eliminato, ma il piatto può essere re-importato da MakerWorld.",errors:{resolveFailed:"Impossibile risolvere questo URL MakerWorld.",downloadFailed:"Download non riuscito. Riprova.",deleteFailed:"Impossibile rimuovere il file dalla libreria."}},gcodeViewer:{back:"Indietro",backToArchives:"Torna agli archivi di stampa",backToFiles:"Torna al gestore file"},libraryTrash:{title:"Cestino",headerButton:"Cestino",headerTooltip:"Visualizza i file spostati nel cestino",backToFiles:"Torna al gestore file",subtitleAdmin:"I file eliminati restano qui per {{days}} giorni, poi vengono rimossi automaticamente. Questa vista mostra il cestino di tutti gli utenti.",subtitleUser:"I file eliminati restano qui per {{days}} giorni, poi vengono rimossi automaticamente.",loading:"Caricamento del cestino…",loadError:"Impossibile caricare il cestino.",empty:"Il cestino è vuoto.",summary:"{{count}} file · {{size}}",emptyTrash:"Svuota cestino",restore:"Ripristina",purgeNow:"Elimina ora",autoPurgeIn:"Eliminazione automatica tra {{when}}",days:"giorni",retentionLabel:"Elimina automaticamente dopo",selectAll:"Seleziona tutto",selectOne:"Seleziona {{filename}}",selectionCount:"{{count}} selezionati",bulkRestore:"Ripristina selezionati",bulkPurge:"Elimina selezionati",col:{filename:"File",folder:"Cartella",size:"Dimensione",deleted:"Spostato nel cestino",autoPurge:"Eliminazione auto.",owner:"Proprietario",actions:"Azioni"},confirm:{purgeTitle:"Eliminare definitivamente?",purgeBody:"{{filename}} verrà eliminato dal disco e non potrà essere ripristinato.",emptyTitle:"Svuotare il cestino?",emptyBody:"Tutti i {{count}} file verranno eliminati dal disco. Azione non annullabile.",bulkPurgeTitle:"Eliminare definitivamente i file selezionati?",bulkPurgeBody:"I {{count}} file selezionati verranno eliminati dal disco e non potranno essere ripristinati.",cta:"Elimina definitivamente"},toast:{restored:"File ripristinato.",restoreFailed:"Impossibile ripristinare il file.",purged:"File eliminato definitivamente.",purgeFailed:"Impossibile eliminare il file.",emptied:"{{count}} file eliminati dal cestino.",emptyFailed:"Impossibile svuotare il cestino.",retentionSaved:"Eliminazione automatica impostata su {{days}} giorni.",retentionFailed:"Impossibile salvare l'impostazione di conservazione.",bulkRestored:"{{count}} file ripristinati.",bulkPurged:"{{count}} file eliminati."}},libraryPurge:{title:"Elimina file vecchi",headerButton:"Elimina vecchi",headerTooltip:"Sposta in blocco i file vecchi nel cestino",description:"I file più vecchi della soglia verranno spostati nel cestino. Le cartelle esterne vengono ignorate. Puoi ripristinarli dal cestino prima dell'eliminazione automatica.",ageLabel:"Sposta i file più vecchi di",days:"giorni",includeNeverPrinted:"Includi i file mai stampati",effectsTitle:"Cosa succede quando fai clic su Pulisci",effect1:"I file corrispondenti vengono spostati nel cestino — non sono ancora eliminati dal disco.",effect2:"Puoi ripristinarli dal cestino in qualsiasi momento fino alla scadenza del periodo di conservazione.",effect3:"Dopo il periodo di conservazione, lo spazzino del cestino li rimuove definitivamente.",effect4:"I file in cartelle esterne (collegate) vengono saltati — Bambuddy non elimina mai dati che non possiede.",previewLoading:"Verifica quanti file corrispondono…",previewFailed:"Impossibile mostrare l'anteprima.",previewSummary:"{{count}} file · {{size}} verrebbero spostati nel cestino",andMore:"…e altri {{count}}",warning:"I file vengono eliminati in modo soft — puoi ripristinarli dal cestino fino alla scadenza del periodo di conservazione.",confirmCta:"Sposta {{count}} nel cestino",purging:"Spostamento nel cestino…",toast:{success:"{{count}} file spostati nel cestino.",failed:"Impossibile eliminare i file."}},libraryAutoPurge:{enableLabel:"Elimina automaticamente i file vecchi",enableDescription:"Esegue l'eliminazione amministrativa una volta al giorno. I file finiscono prima nel cestino — non vengono eliminati immediatamente.",ageLabel:"Elimina automaticamente i file più vecchi di",ageDescription:"Minimo 7 giorni, massimo 10 anni. Usa la stessa regola di età del pulsante Elimina manuale.",days:"giorni",includeNeverPrinted:"Includi i file mai stampati",saveFailed:"Impossibile salvare le impostazioni di eliminazione automatica."},archivePurge:{headerButton:"Elimina vecchi",headerTooltip:"Eliminazione massiva vecchi archivi",title:"Elimina vecchi archivi",description:"Cancella la vecchia cronologia di stampa. Ogni archivio invecchia in base alla sua ultima stampa completata — ristampare azzera l'età, quindi il lavoro attivo non viene mai eliminato.",ageLabel:"Elimina archivi non stampati negli ultimi",days:"giorni",effectsTitle:"Cosa succede quando fai clic su Pulisci",effect1:"Ogni archivio corrispondente viene nascosto dagli elenchi e i suoi file vengono rimossi dal disco (3MF, miniatura, timelapse, 3MF sorgente, F3D, foto).",effect2:"La riga dell'archivio rimane nel database, così le Quick Stats conservano il contributo di filamento, tempo, costo ed energia — come il comportamento predefinito dell'eliminazione singola.",effect3:"Spunta «Rimuovi anche dalle statistiche» qui sotto per eliminare anche il contributo dalle Quick Stats (equivalente all'opzione dell'eliminazione singola). Questo percorso è irreversibile.",effect4:"Ristampare un archivio azzera il suo conteggio dell'età, quindi gli archivi attivi sono al sicuro.",purgeStatsLabel:"Rimuovi anche dalle statistiche",purgeStatsHint:"Rimuove gli archivi selezionati dalle Quick Stats (filamento, tempo, costo, energia). Senza questa opzione le Quick Stats conservano ogni contributo e solo i file vengono cancellati.",previewLoading:"Verifica del numero di archivi corrispondenti…",previewFailed:"Impossibile visualizzare l'anteprima della pulizia.",previewSummary:"{{count}} archivi · {{size}} verrebbero rimossi",andMore:"…e altri {{count}}",warning:"I file vengono rimossi dal disco e non possono essere ripristinati. Scarica o aggiungi ai preferiti tutto ciò che vuoi conservare prima di continuare.",confirmCta:"Rimuovi {{count}} archivio(i)",purging:"Rimozione…",toast:{success:"{{count}} archivio(i) rimosso.",failed:"Impossibile eliminare gli archivi."}},archiveAutoPurge:{enableLabel:"Elimina auto. vecchi archivi",enableDescription:"Una volta al giorno nasconde dagli elenchi gli archivi non stampati entro la soglia e rimuove i loro file dal disco. Ristampare azzera il timer.",ageLabel:"Eliminazione auto. di archivi non stampati negli ultimi",ageDescription:"Minimo 7 giorni, massimo 10 anni. Basato sull'ultima stampa completata — ristampare azzera l'età. Rimuove 3MF, miniatura, timelapse, 3MF sorgente, F3D e foto.",days:"giorni",purgeStatsLabel:"Rimuovi anche dalle statistiche",purgeStatsDescription:"Quando abilitato, lo sweeper giornaliero elimina anche il contributo di ogni archivio purgato dalle Quick Stats (filamento, tempo, costo, energia). Disabilitato per impostazione predefinita — le Quick Stats mantengono il contributo e solo i file vengono cancellati.",runNow:"Elimina archivi ora",saveFailed:"Impossibile salvare le impostazioni di pulizia automatica."},cameraTokens:{title:"Token API telecamera",navTitle:"Token API telecamera",description:"Token a lunga durata per incorporare lo stream della telecamera in Home Assistant, Frigate, chioschi o qualsiasi altro strumento che richieda un URL stabile. Ogni token è limitato allo stream della telecamera e può essere revocato in qualsiasi momento.",loading:"Caricamento…",confirmRevoke:{title:"Revocare questo token?",body:`Qualsiasi dispositivo che usa "{{name}}" perderà l'accesso immediatamente. Non può essere annullato.`,cancel:"Annulla",confirm:"Revoca"},create:{title:"Crea nuovo token",nameLabel:"Nome token",namePlaceholder:"es. Home Assistant",daysLabel:"Giorni alla scadenza",submit:"Crea",hint:"Durata massima 365 giorni. Il valore del token viene mostrato solo alla creazione — copialo ora."},created:{title:"Token creato – copialo ora",warning:"Questa è l'unica volta in cui questo token sarà visibile. Dopo la chiusura di questa finestra non potrai più visualizzarlo.",copy:"Copia",dismiss:"L'ho salvato"},list:{myTitle:"I miei token",allTitle:"Tutti gli utenti (vista admin)",empty:"Nessun token ancora.",name:"Nome",owner:"Proprietario",prefix:"Prefisso",created:"Creato",expires:"Scade",lastUsed:"Ultimo uso",revoke:"Revoca",expired:"Scaduto"},toast:{created:"Token creato",createFailed:"Creazione token fallita",revoked:"Token revocato",revokeFailed:"Revoca token fallita",loadFailed:"Caricamento token fallito",copied:"Copiato negli appunti",copyFailed:"Copia non riuscita – seleziona e copia manualmente"}},forecast:{title:"Previsione scorte",noSpools:"Nessuna bobina attiva trovata. Aggiungi bobine al tuo inventario per vedere i dati di previsione.",noUsageData:"Nessun dato di utilizzo disponibile — impossibile proiettare la timeline delle scorte.",sku:"SKU",material:"Materiale",stock:"Scorte",dailyRate:"Tasso",daysLeft:"Giorni rimanenti",emptyBy:"Esaurimento previsto",reorderBy:"Riordinare entro",actions:"Azioni",trend:"Tendenza",estimated:"Stim.",noData:"Nessun dato",timeframe:"Periodo",chartTitle:"Stock proiettato — Top 5 materiali",dashedLinesROP:"Linee tratteggiate = punti di riordino",stockLevel:"Livello scorte",reorderPoint:"Punto di riordino",safetyMargin:"Margine di sicurezza",trendLegend:"Tendenza (basata su storico, livello servizio 95%)",estimatedLegend:"Stimata (delta peso)",noDataLegend:"Nessun dato",ropLabel:"PR",ssLabel:"SS",safetyStockLegend:"Scorta di sicurezza",stockArrivalLegend:"Arrivo merce",stockoutLegend:"Esaurimento scorte",alertCount_one:"{{count}} avviso",alertCount_other:"{{count}} avvisi",order:"Ordina",globalLeadTime:"Lead time globale",globalLeadTimeHint:"Lead time globale minimo — usato nel calcolo del punto di riordino per tutti gli SKU",save:"Salva",cancel:"Annulla",settingsSaved:"Impostazioni salvate",failedSaveSettings:"Impossibile salvare le impostazioni",globalLeadTimeSaved:"Lead time globale salvato",skuLeadTimeOverride:"Override lead time SKU",skuLeadTimeHint:"0 = usa lead time globale. Imposta >0 per sovrascrivere per questo SKU.",safetyMarginLabel:"Margine di sicurezza",effectiveLeadTime:"Lead time effettivo",effectiveLeadTimeHint:"max(globale {{global}}g, SKU {{sku}}g)",reorderPointHint:"d̄ × LT + safety margin — ordina quando le scorte raggiungono questo livello",safetyMarginHint:"Scorta di sicurezza statistica (z=1,65 × σ × √LT) + buffer definito dall'utente",safetyMarginHintDays:"Buffer aggiunto sulla scorta di sicurezza statistica.{{approx}}",safetyMarginHintDaysApprox:" ≈ {{g}}g al tasso attuale.",safetyMarginHintG:"Buffer di peso fisso aggiunto sulla scorta di sicurezza statistica.{{approx}}",safetyMarginHintGApprox:" ≈ {{days}}g al tasso attuale.",individualSpools:"Bobine singole",labelWeight:"Etichetta",spoolCount_one:"{{count}} bobina",spoolCount_other:"{{count}} bobine",stockBreakRisk:"Rischio di rottura scorte",stockBreakBefore:"Rottura scorte prima del rifornimento",stockBreakDetail:"{{days}}g rimanenti, lead time {{lt}}g.",reorderNow:"Riordina ora",reorderTriggerPassed:"La data di attivazione {{date}} è passata.",shoppingList:"Lista della spesa",shoppingListItems_one:"({{count}} articolo)",shoppingListItems_other:"({{count}} articoli)",shoppingListEmpty:"La lista della spesa è vuota. Clicca sull'icona del carrello in qualsiasi riga per aggiungere articoli.",addToCart:"Aggiungi alla lista della spesa",alertsSnoozed:"Silenzia avvisi per questo SKU",alertsEnabled:"Riattiva avvisi per questo SKU",addedToCart:"Aggiunto alla lista della spesa",failedAddItem:"Impossibile aggiungere l'articolo",listView:"Lista",logisticsView:"Logistica",qty:"Qtà",weight:"Peso",leadTime:"Lead time",expectedRestock:"Rifornimento previsto",status:"Stato",note:"Nota",pending:"In attesa",purchased:"Acquistato",received:"Ricevuto",markPurchased:"Segna come acquistato",markReceived:"Segna come ricevuto — aggiunge bobine all'inventario",resetToPending:"Ripristina in attesa",remove:"Rimuovi",clearAll:"Cancella tutto",downloadCsv:"CSV",addToCartTitle:"Aggiungi alla lista della spesa",byQuantity:"Per quantità",byDuration:"Per durata",numberOfSpools:"Numero di bobine",lastHowManyDays:"Per quanti giorni deve durare?",noUsageQty:"Nessun dato di utilizzo — quantità impostata a 1.",noteOptional:"Nota (opzionale)",notePlaceholder:"es. per il progetto X, urgente…",addNSpools_one:"Aggiungi {{count}} bobina",addNSpools_other:"Aggiungi {{count}} bobine",onArrival:"All'arrivo",stockBreakIn:"Rottura scorte tra {{days}}g.",stockRunsOutBefore:"Le scorte si esauriscono prima dello scadere del lead time di {{lt}}g.",atRate:"A {{rate}}g/giorno hai bisogno di",moreSpools_one:"{{count}} bobina in più",moreSpools_other:"{{count}} bobine in più",bridgeGap:"per colmare il divario.",noReadAccess:"Non hai il permesso di visualizzare le previsioni di inventario.",noWriteAccess:"Non hai il permesso di modificare le impostazioni di previsione."}},_pe={nav:{printers:"프린터",archives:"아카이브",queue:"대기열",stats:"통계",profiles:"프로필",maintenance:"유지보수",projects:"프로젝트",inventory:"필라멘트",files:"파일 관리자",makerworld:"MakerWorld",notifications:"알림",settings:"설정",system:"시스템",collapseSidebar:"사이드바 접기",expandSidebar:"사이드바 펼치기",update:"업데이트",updateAvailable:"업데이트 가능: v{{version}}",updateAvailableBanner:"버전 {{version}}이(가) 출시되었습니다!",viewUpdate:"업데이트 보기",viewOnGithub:"GitHub에서 보기",keyboardShortcuts:"키보드 단축키 (?)",switchToLight:"라이트 모드로 전환",switchToDark:"다크 모드로 전환",switchToSystem:"기기 설정으로 전환",smartSwitches:"스마트 스위치",logout:"로그아웃",installApp:"앱 설치",installAppSuccess:"Bambuddy가 설치되었습니다"},common:{save:"저장",saving:"저장 중...",cancel:"취소",delete:"삭제",edit:"편집",add:"추가",close:"닫기",confirm:"확인",loading:"로딩 중...",error:"오류",errorLoading:"데이터 로딩 오류",retry:"재시도",success:"성공",warning:"경고",enabled:"활성화됨",disabled:"비활성화됨",yes:"예",no:"아니요",on:"켜짐",off:"꺼짐",all:"전체",none:"없음",search:"검색",filter:"필터",sort:"정렬",refresh:"새로고침",download:"다운로드",upload:"업로드",uploading:"업로드 중...",uploadFailed:"업로드 실패",actions:"작업",status:"상태",name:"이름",description:"설명",date:"날짜",time:"시간",hours:"시간",minutes:"분",seconds:"초",days:"일",enable:"활성화",disable:"비활성화",permissions:"권한",noPrinters:"등록된 프린터가 없습니다",noData:"데이터가 없습니다",linkNotFound:"링크를 찾을 수 없습니다",required:"필수",optional:"선택",dismiss:"닫기",apply:"적용",reset:"초기화",export:"내보내기",import:"가져오기",clear:"지우기",selectAll:"전체 선택",deselectAll:"전체 해제",noChange:"— 변경 없음 —",unchanged:"변경 없음",unassigned:"미할당",unknown:"알 수 없음",unknownError:"알 수 없는 오류",today:"오늘",tomorrow:"내일",asap:"즉시",overdue:"기한 초과",now:"지금",collapse:"접기",expand:"펼치기",viewArchive:"아카이브 보기",viewInFileManager:"파일 관리자에서 보기",addedBy:"{{username}}님이 추가함",prints:"인쇄",more:"+{{count}}개 더",ascending:"오름차순",descending:"내림차순",back:"뒤로",copy:"복사",copied:"복사됨!",printer:"프린터",remove:"제거",type:"유형",print:"인쇄",rename:"이름 변경",move:"이동",create:"만들기",duplicate:"복제",left:"왼쪽",right:"오른쪽"},printers:{title:"프린터",addPrinter:"프린터 추가",editPrinter:"프린터 편집",deletePrinter:"프린터 삭제",printerName:"프린터 이름",serialNumber:"일련번호",ipAddress:"IP 주소 / 호스트명",accessCode:"액세스 코드",model:"모델",nozzleCount:"노즐 수",autoArchive:"자동 아카이브",status:{available:"사용 가능",idle:"대기 중",printing:"인쇄 중",paused:"일시정지",offline:"오프라인",problem:"문제 발생",error:"오류",finished:"완료",unknown:"알 수 없음"},temperatures:{nozzle:"노즐",bed:"베드",chamber:"챔버"},progress:"{{percent}}% 완료",timeRemaining:"{{time}} 남음",deleteConfirm:'"{{name}}"을(를) 삭제하시겠습니까?',maintenanceOk:"유지보수 정상",maintenanceWarning:"{{count}}개 경고",maintenanceWarning_plural:"{{count}}개 경고",maintenanceDue:"{{count}}개 예정",maintenanceDue_plural:"{{count}}개 예정",sort:{name:"이름",status:"상태",model:"모델",location:"위치",ascending:"오름차순 정렬",descending:"내림차순 정렬"},cardSize:{small:"작은 카드",medium:"중간 카드",large:"큰 카드",extraLarge:"아주 큰 카드"},hideOffline:"오프라인 숨기기",nextAvailable:"다음 가용",powerOn:"전원 켜기",offlinePrintersWithPlugs:"스마트 플러그가 연결된 오프라인 프린터",noPrintersConfigured:"아직 설정된 프린터가 없습니다",search:"프린터 검색...",noSearchResults:"검색 또는 필터 조건에 맞는 프린터가 없습니다",filter:{allStatuses:"모든 상태",allLocations:"모든 위치"},toolbar:{filters:"필터",view:"보기",actions:"작업"},readyToPrint:"인쇄 준비 완료",external:"외부",extL:"외부-L",extR:"외부-R",deleteArchives:"인쇄 아카이브 삭제",noLabel:"라벨 없음",printPreview:"인쇄 미리보기",width:"너비",height:"높이",noObjectsFound:"객체를 찾을 수 없습니다",objectsLoadedOnPrintStart:"인쇄 시작 시 객체가 로드됩니다",willBeSkipped:"건너뛸 예정",name:"이름",serialCannotBeChanged:"일련번호는 변경할 수 없습니다",locationHelp:"프린터 그룹화 및 대기열 작업 필터링에 사용됩니다",wifiSignal:{veryWeak:"매우 약함",weak:"약함",fair:"보통",good:"좋음",excellent:"매우 좋음"},maintenanceUpToDate:"모든 유지보수 최신 상태 - 클릭하여 보기",chamberLightOn:"챔버 조명 켜기",chamberLightOff:"챔버 조명 끄기",files:"파일",browseFiles:"프린터 파일 탐색",autoOffAfterPrint:"인쇄 후 자동 전원 끄기",autoOffExecuted:"자동 끄기 실행됨 - 초기화하려면 프린터를 켜세요",hmsErrors:"HMS 오류",viewHmsErrors:"{{count}}개 HMS 오류 보기",resume:"재개",pause:"일시정지",stop:"정지",camera:"카메라",skipObject:"객체 건너뛰기",reconnect:"재연결",forceRefresh:"강제 새로고침",forceRefreshSuccess:"새로고침 요청됨",mqttDebug:"MQTT 디버그",printerInformation:"프린터 정보",copyToClipboard:"복사",copied:"복사됨!",state:"상태",wifiSignalLabel:"WiFi 신호",developerMode:"개발자 모드",enabled:"활성화됨",disabled:"비활성화됨",addedOn:"추가됨",sdCard:"SD 카드",inserted:"삽입됨",notInserted:"삽입되지 않음",totalPrintHours:"인쇄 시간",activeNozzle:"활성: {{nozzle}} 노즐",nozzleRack:"노즐 랙",nozzleDocked:"도킹됨",nozzleMounted:"장착됨",nozzleActive:"활성",nozzleIdle:"대기",nozzleDiameter:"직경",nozzleType:"유형",nozzleStatus:"상태",nozzleFilament:"필라멘트",nozzleWear:"마모",nozzleMaxTemp:"최대 온도",nozzleSerial:"일련번호",nozzleHardenedSteel:"경화강",nozzleStainlessSteel:"스테인리스강",nozzleTungstenCarbide:"텅스텐 카바이드",nozzleFlow:"유량",nozzleHighFlow:"고유량",nozzleStandardFlow:"표준",firmwareUpdate:"펌웨어 업데이트",firmwareInstructions:"프린터 터치스크린에서",firmwareNav:"이동",settings:"설정",firmware:"펌웨어",discoverPrinters:"프린터 검색",searching:"검색 중...",manualEntry:"수동 입력",addFromCloud:"클라우드에서 추가",toast:{printerDeleted:"프린터가 삭제되었습니다",missingSpoolAssignment:"{{printer}}에서 인쇄가 시작되었습니다. 슬롯 할당 누락: {{slots}}",printerAdded:"프린터가 추가되었습니다",printerUpdated:"프린터가 업데이트되었습니다",failedToDelete:"프린터 삭제 실패",failedToAdd:"프린터 추가 실패",failedToUpdate:"프린터 업데이트 실패",commandSent:"명령이 전송되었습니다",failedToSendCommand:"명령 전송 실패",turnedOn:"{{name}} 켜짐",failedToPowerOn:"{{name}} 전원 켜기 실패",scriptTriggered:"스크립트가 실행되었습니다",printStopped:"인쇄가 정지되었습니다",printPaused:"인쇄가 일시정지되었습니다",printResumed:"인쇄가 재개되었습니다",referenceDeleted:"참조가 삭제되었습니다",detectionAreaSaved:"감지 영역이 저장되었습니다",failedToRunScript:"스크립트 실행 실패",failedToStopPrint:"인쇄 정지 실패",failedToPausePrint:"인쇄 일시정지 실패",failedToResumePrint:"인쇄 재개 실패",failedToControlChamberLight:"챔버 조명 제어 실패",failedToSetSpeed:"인쇄 속도 설정 실패",failedToUpdateSetting:"설정 업데이트 실패",failedToSkipObjects:"객체 건너뛰기 실패",failedToRereadRfid:"RFID 재읽기 실패",failedToCheckPlate:"플레이트 확인 실패",failedToUpdateLabel:"라벨 업데이트 실패",failedToDeleteReference:"참조 삭제 실패",failedToSaveDetectionArea:"감지 영역 저장 실패",plateCheckEnabled:"플레이트 확인 활성화됨",plateCheckDisabled:"플레이트 확인 비활성화됨",calibrationSaved:"캘리브레이션이 저장되었습니다!",calibrationFailed:"캘리브레이션 실패",rfidRereadInitiated:"RFID 재읽기가 시작되었습니다",loadInitiated:"필라멘트 로딩 중…",unloadInitiated:"필라멘트 언로딩 중…",failedToLoad:"필라멘트 로드 실패",failedToUnload:"필라멘트 언로드 실패",connectionFailedNotAdded:"프린터에 연결할 수 없습니다. IP, 시리얼 번호, 액세스 코드를 확인하고 LAN 전용 모드가 켜져 있는지 확인하세요. 프린터가 추가되지 않았습니다."},connection:{connected:"연결됨",offline:"오프라인"},plateStatus:{markCleared:"플레이트 비움으로 표시",cleared:"플레이트 비워짐",notCleared:"플레이트 미비움",inUse:"플레이트 사용 중"},queue:{inQueue:"대기열에 {{count}}개",inQueue_plural:"대기열에 {{count}}개"},controls:"제어",rfid:{reread:"RFID 재읽기"},ams:{load:"로드",unload:"언로드"},bedJog:{title:"빌드 플레이트 이동",bed:"베드",step:"이동 거리 (mm)",up:"플레이트 위로",down:"플레이트 아래로",disabledWhilePrinting:"인쇄 중 비활성화됨",notHomedTitle:"프린터 홈 설정 필요",notHomedMessage:"마지막 인쇄 이후 홈 설정이 되지 않았습니다. 안전한 위치 지정을 위해 자동 홈 설정을 먼저 실행하거나, 그냥 이동하세요 — 소프트 엔드스톱이 무시됩니다.",homeZ:"자동 홈 설정",moveAnyway:"그냥 이동",homingStarted:"프린터 자동 홈 설정 중…"},permission:{noAdd:"프린터를 추가할 권한이 없습니다",noEdit:"프린터를 편집할 권한이 없습니다",noDelete:"프린터를 삭제할 권한이 없습니다",noControl:"프린터를 제어할 권한이 없습니다",noFiles:"프린터 파일에 접근할 권한이 없습니다",noAmsRfid:"AMS RFID를 재읽기할 권한이 없습니다",noSmartPlugControl:"스마트 플러그를 제어할 권한이 없습니다",noCamera:"카메라를 볼 권한이 없습니다"},modal:{addTitle:"프린터 추가",editTitle:"프린터 편집",myPrinter:"내 프린터",selectModel:"모델 선택...",locationGroup:"위치 / 그룹 (선택사항)",locationPlaceholder:"예: 작업실, 사무실, 지하실",autoArchiveLabel:"완료된 인쇄 자동 아카이브",fromPrinterSettings:"프린터 설정에서",modelOptional:"모델 (선택사항)",saveChanges:"변경사항 저장"},skipObjects:{tooltip:"객체 건너뛰기",onlyWhilePrinting:"객체 건너뛰기 (인쇄 중에만)",requiresMultiple:"객체 건너뛰기 (2개 이상 필요)",title:"객체 건너뛰기",matchIdsInfo:"프린터 화면의 ID와 일치",printerShowsIds:"프린터 화면에서 빌드 플레이트의 객체 ID를 표시합니다",skipSelected:"선택 항목 건너뛰기",skipping:"건너뛰는 중...",noObjectsSelected:"선택된 객체 없음",selectObjectsToSkip:"현재 인쇄에서 건너뛸 객체를 선택하세요",skipped:"건너뜀",objectsSkipped:"객체가 건너뛰어졌습니다",activeCount:"{{count}}개 활성",waitForLayer:"객체를 건너뛰려면 2층 이상을 기다리세요 (현재 {{layer}}층)",skip:"건너뛰기",confirmTitle:"객체를 건너뛰시겠습니까?",confirmMessage:'"{{name}}"을(를) 건너뛰시겠습니까? 이 작업은 취소할 수 없습니다.'},confirm:{deleteTitle:"프린터 삭제",deleteMessage:'"{{name}}"을(를) 삭제하시겠습니까? 모든 연결 설정이 제거됩니다.',deleteArchivesNote:"이 프린터의 모든 인쇄 기록이 영구적으로 삭제됩니다.",keepArchivesNote:"인쇄 기록은 유지되지만 이 프린터와 연결이 해제됩니다.",stopTitle:"인쇄 정지",stopMessage:'"{{name}}"의 현재 인쇄를 정지하시겠습니까? 인쇄 작업이 취소됩니다.',stopButton:"인쇄 정지",pauseTitle:"인쇄 일시정지",pauseMessage:'"{{name}}"의 현재 인쇄를 일시정지하시겠습니까?',pauseButton:"인쇄 일시정지",resumeTitle:"인쇄 재개",resumeMessage:'"{{name}}"의 인쇄를 재개하시겠습니까?',resumeButton:"인쇄 재개",powerOnTitle:"프린터 전원 켜기",powerOnMessage:'"{{name}}"의 전원을 켜시겠습니까?',powerOnButton:"전원 켜기",powerOffTitle:"프린터 전원 끄기",powerOffMessage:'"{{name}}"의 전원을 끄시겠습니까?',powerOffWarning:'경고: "{{name}}"이(가) 현재 인쇄 중입니다! 전원을 끄시겠습니까? 인쇄가 중단되고 프린터가 손상될 수 있습니다.',powerOffButton:"전원 끄기",haToggleTitle:'"{{name}}" 토글',haToggleMessage:"Home Assistant 엔티티 {{entity}}를 토글하시겠습니까? 현재 켜져 있으면 전원이 꺼질 수 있습니다.",haToggleWarning:'경고: "{{name}}"이(가) 현재 인쇄 중입니다! {{entity}}를 토글하면 전원이 차단되어 인쇄가 중단될 수 있습니다. 계속하시겠습니까?',haToggleButton:"토글"},bulk:{select:"선택",selectAll:"전체 선택",selectByLocation:"위치별 선택",selected:"{{count}}개 선택됨",actions:{stop:"정지",pause:"일시정지",resume:"재개",clearPlate:"베드 비우기",clearHMS:"알림 지우기"},confirm:{stopTitle:"{{count}}개 인쇄 정지",stopMessage:"{{count}}개 프린터의 활성 인쇄를 취소합니다. 이 작업은 취소할 수 없습니다.",stopButton:"모두 정지",pauseTitle:"{{count}}개 인쇄 일시정지",pauseMessage:"{{count}}개 프린터의 활성 인쇄를 일시정지합니다.",pauseButton:"모두 일시정지",clearPlateTitle:"{{count}}개 인쇄 베드 비우기",clearPlateMessage:"{{count}}개 프린터의 인쇄 베드를 비우고 대기열 작업을 시작할 수 있습니다.",clearPlateButton:"모두 비우기"},success:"{{count}}개 프린터에서 {{action}} 완료",partial:"{{succeeded}}개 성공, {{failed}}개 실패",noneApplicable:"선택된 프린터 중 이 작업에 적합한 상태의 프린터가 없습니다",selectByState:"상태별 선택"},discovery:{title:"프린터 검색",searching:"검색 중...",scanning:"스캔 중...",scanProgress:"스캔 중... {{scanned}}/{{total}}",foundPrinters:"{{count}}개 프린터 발견",noPrintersFound:"프린터를 찾을 수 없습니다",noPrintersFoundSubnet:"지정된 서브넷에서 프린터를 찾을 수 없습니다.",noPrintersFoundNetwork:"네트워크에서 프린터를 찾을 수 없습니다.",allConfigured:"검색된 모든 프린터가 이미 설정되어 있습니다.",alreadyAdded:"이미 추가됨",select:"선택",manualEntry:"수동 입력",addFromCloud:"클라우드에서 추가",subnetToScan:"스캔할 서브넷",dockerNote:"Docker가 감지되었습니다. CIDR 표기법으로 프린터의 서브넷을 입력하세요. docker-compose.yml에 network_mode: host가 필요합니다.",scanSubnet:"서브넷에서 프린터 스캔",discoverNetwork:"네트워크에서 프린터 검색",scanningSubnet:"Bambu 프린터를 위해 서브넷 스캔 중...",scanningNetwork:"네트워크 스캔 중...",serialRequired:"일련번호 필수",unknown:"알 수 없음",failedToStart:"검색 시작 실패",customSubnetOption:"사용자 지정 서브넷...",customSubnetLabel:"사용자 지정 서브넷 (CIDR)",customSubnetNote:"프린터가 이 서버와 다른 네트워크에 있는 경우 사용자 지정 서브넷을 사용하세요. FTP (990) 및 MQTT (8883) 포트가 라우팅 경계를 통해 접근 가능해야 합니다."},drying:{start:"건조 시작",stop:"건조 정지",temperature:"온도",duration:"시간",hours:"시간",timeRemaining:"{{time}} 남음",active:"건조 중",notSupported:"건조 지원 안 됨",powerRequired:"건조를 활성화하려면 AMS 전원 어댑터를 연결하세요",startingDrying:"건조 시작 중...",stoppingDrying:"건조 정지 중...",rotateTray:"건조 중 스풀 회전"},filaments:"필라멘트",openCameraOverlay:"카메라 오버레이 열기",openCameraWindow:"새 창에서 카메라 열기",firmwareUpdateAvailable:"펌웨어 업데이트 가능: {{current}} → {{latest}}",firmwareUpToDate:"펌웨어 {{version}} — 최신 상태",firmwareUpdateButton:"업데이트",plateDetection:{noPermission:"프린터를 업데이트할 권한이 없습니다",enabledClick:"플레이트 확인 활성화됨 - 클릭하여 비활성화",disabledClick:"플레이트 확인 비활성화됨 - 클릭하여 활성화",manageCalibration:"플레이트 감지 캘리브레이션 관리",calibrationRequired:"캘리브레이션 필요",calibrationInstructions:"빌드 플레이트가 <strong>완전히 비어 있는지</strong> 확인한 후 캘리브레이션을 클릭하세요.",calibrationDescription:"캘리브레이션은 빈 플레이트의 참조 이미지를 캡처합니다. 이후 확인 시 이 참조와 비교하여 객체를 감지합니다.",calibrationTip:"<strong>팁:</strong> 다른 플레이트에 대해 최대 5개의 캘리브레이션을 저장할 수 있습니다. 확인 시 시스템이 자동으로 가장 잘 맞는 것을 사용합니다.",plateEmpty:"플레이트가 비어 있는 것으로 보입니다",objectsDetected:"플레이트에 객체가 감지되었습니다",confidence:"신뢰도",difference:"차이",analysisPreview:"분석 미리보기:",analysisLegend:"초록 박스 = 감지 영역, 빨간 오버레이 = 캘리브레이션과의 차이",savedReferences:"저장된 참조 ({{count}}/{{max}})",deleteReference:"참조 삭제",labelPlaceholder:"라벨...",clickToEdit:"{{label}} - 클릭하여 편집",clickToAddLabel:"클릭하여 라벨 추가"},speed:{title:"인쇄 속도",silent:"조용함 (50%)",standard:"표준 (100%)",sport:"스포츠 (124%)",ludicrous:"루디크러스 (166%)"},airduct:{title:"에어덕트 모드",cooling:"냉각",heating:"가열"},noSdCard:"SD 없음",door:{open:"열림",closed:"닫힘"},fans:{partCooling:"파트 냉각 팬",auxiliary:"보조 팬",chamber:"챔버 팬"},clickToViewHmsErrors:"HMS 오류 보기 클릭",estimatedCompletion:"예상 완료 시간",plateNumber:"플레이트 {{number}}",slotOptions:"슬롯 옵션",amsPopup:{friendlyName:"AMS 이름",friendlyNamePlaceholder:"예: AMS 친숙한 이름",serialNumber:"일련번호",firmwareVersion:"펌웨어",save:"저장",clear:"지우기",noEditPermission:"AMS 유닛 이름을 변경할 권한이 없습니다"},firmwareModal:{title:"펌웨어 업데이트",titleUpToDate:"펌웨어 정보",currentVersion:"현재:",latestVersion:"최신:",releaseNotes:"릴리스 노트",checkingPrereqs:"전제 조건 확인 중...",sdCardReady:"SD 카드 준비됨. 아래를 클릭하여 펌웨어를 업로드하세요.",uploadedSuccess:"SD 카드에 펌웨어가 업로드되었습니다!",applyInstructions:"프린터에서 업데이트를 적용하려면:",step1:"프린터 터치스크린에서 <strong>설정</strong>으로 이동하세요",step2:"<strong>펌웨어</strong>로 이동하세요",step3:"<strong>SD 카드에서 업데이트</strong>를 선택하세요",step4:"업데이트에 10-20분이 소요됩니다",done:"완료",starting:"시작 중...",uploadFirmware:"펌웨어 업로드",uploadFailed:"업로드 시작 실패: {{error}}",uploadedToast:"펌웨어 업로드됨! 프린터 화면에서 업데이트를 시작하세요.",availableVersions:"사용 가능한 버전",usable:"사용 가능",unavailable:"사용 불가",installed:"설치됨",newerBadge:"최신",olderBadge:"이전",currentBadge:"현재"},accessCodePlaceholder:"현재 값을 유지하려면 비워두세요",roi:{title:"감지 영역 (ROI)",xStart:"X 시작",yStart:"Y 시작",width:"너비",height:"높이",instruction:"빌드 플레이트에 집중할 감지 영역을 조정하세요. 미리보기의 초록 박스가 현재 영역을 표시합니다."},developerModeWarning:"개발자 LAN 모드가 활성화되지 않음: {{names}}. 일부 기능이 작동하지 않을 수 있습니다.",howToEnable:"활성화 방법",incompatibleFile:"이 파일은 {{slicedFor}}용으로 슬라이싱되었지만, 이 프린터는 {{printerModel}}입니다",dropNotPrintable:".gcode 및 .gcode.3mf 파일만 인쇄할 수 있습니다",dropToPrint:"놓아서 인쇄",cannotPrint:"프린터 사용 중",addPreflight:{checking:"연결 확인 중...",warning:"일부 연결 확인이 실패했습니다. 이 프린터가 오프라인으로 표시될 수 있습니다. 아래 항목을 검토하고 수정하거나 그냥 저장하세요.",back:"뒤로",saveAnyway:"그냥 저장"}},archives:{title:"인쇄 아카이브",searchPlaceholder:"아카이브 검색...",filterByPrinter:"프린터별 필터",filterByStatus:"상태별 필터",sortBy:"정렬 기준",sortNewest:"최신순",sortOldest:"오래된순",sortName:"이름",sortDuration:"시간",sortLargest:"큰 것 먼저",sortSmallest:"작은 것 먼저",sortSize:"크기",noArchives:"아카이브를 찾을 수 없습니다",noArchivesSearch:"검색 조건에 맞는 아카이브가 없습니다",originalPrintNotVisible:"원본 인쇄가 보이지 않음 - 필터를 지워보세요",noArchivesYet:"아직 아카이브가 없습니다",prints:"인쇄",pagination:{showing:"표시 중",to:"~",of:"/",show:"표시",page:"페이지",all:"전체"},loadingArchives:"아카이브 로딩 중...",releaseToUpload:"놓아서 업로드",showAll:"모두 보기",showFavoritesOnly:"즐겨찾기만 보기",gridView:"그리드 보기",listView:"목록 보기",calendarView:"달력 보기",logView:"인쇄 로그",manageTags:"태그 관리",showFailedPrints:"실패한 인쇄 표시",hideFailedPrints:"실패한 인쇄 숨기기",hideDuplicates:"중복 숨기기",viewOriginalPrint:"원본 인쇄 보기 클릭 (#{{id}})",printTime:"인쇄 시간",filamentUsed:"사용된 필라멘트",cost:"비용",reprint:"재인쇄",preview:"미리보기",deleteArchive:"아카이브 삭제",deleteConfirm:"이 아카이브를 삭제하시겠습니까?",favorite:"즐겨찾기",unfavorite:"즐겨찾기에서 제거",viewDetails:"상세 보기",status:{completed:"완료",failed:"실패",stopped:"정지됨"},toast:{source3mfAttached:"소스 3MF 첨부됨: {{filename}}",failedUploadSource3mf:"소스 3MF 업로드 실패",source3mfRemoved:"소스 3MF 제거됨",failedRemoveSource3mf:"소스 3MF 제거 실패",f3dAttached:"F3D 첨부됨: {{filename}}",failedUploadF3d:"F3D 업로드 실패",f3dRemoved:"F3D 제거됨",failedRemoveF3d:"F3D 제거 실패",timelapseAttached:"타임랩스 첨부됨: {{filename}}",timelapseAlreadyAttached:"타임랩스가 이미 첨부됨",noMatchingTimelapse:"일치하는 타임랩스를 찾을 수 없습니다",failedScanTimelapse:"타임랩스 스캔 실패",failedAttachTimelapse:"타임랩스 첨부 실패",timelapseRemoved:"타임랩스 제거됨",failedRemoveTimelapse:"타임랩스 제거 실패",timelapseUploaded:"타임랩스 업로드됨: {{filename}}",failedUploadTimelapse:"타임랩스 업로드 실패",archiveDeleted:"아카이브가 삭제되었습니다",failedDeleteArchive:"아카이브 삭제 실패",addedToFavorites:"즐겨찾기에 추가됨",removedFromFavorites:"즐겨찾기에서 제거됨",projectUpdated:"프로젝트가 업데이트되었습니다",failedUpdateProject:"프로젝트 업데이트 실패",linkCopied:"링크가 클립보드에 복사되었습니다",failedCopyLink:"링크 복사 실패",photoDeleted:"사진이 삭제되었습니다",failedDeletePhoto:"사진 삭제 실패",failedDeleteArchives:"아카이브 삭제 실패",failedUpdateFavorites:"즐겨찾기 업데이트 실패",exportDownloaded:"내보내기 다운로드됨",exportFailed:"내보내기 실패"},menu:{print:"인쇄",schedule:"예약",openInBambuStudio:"슬라이서에서 열기",slice:"슬라이스",externalLink:"외부 링크",viewOnMakerWorld:"MakerWorld에서 보기",preview3d:"3D 미리보기",viewTimelapse:"타임랩스 보기",scanForTimelapse:"타임랩스 검색",uploadTimelapse:"타임랩스 업로드",removeTimelapse:"타임랩스 제거",downloadSource3mf:"소스 3MF 다운로드",uploadSource3mf:"소스 3MF 업로드",replaceSource3mf:"소스 3MF 교체",removeSource3mf:"소스 3MF 제거",uploadF3d:"F3D 업로드",replaceF3d:"F3D 교체",downloadF3d:"F3D 다운로드",removeF3d:"F3D 제거",download:"다운로드",copyDownloadLink:"다운로드 링크 복사",qrCode:"QR 코드",viewPhotos:"사진 보기",viewPhotosCount:"사진 보기 ({{count}})",projectPage:"프로젝트 페이지",addToFavorites:"즐겨찾기에 추가",removeFromFavorites:"즐겨찾기에서 제거",edit:"편집",goToProject:"프로젝트로 이동: {{name}}",addToProject:"프로젝트에 추가",removeFromProject:"프로젝트에서 제거",loading:"로딩 중...",noProjectsAvailable:"사용 가능한 프로젝트 없음",searchProjects:"프로젝트 검색…",select:"선택",deselect:"선택 해제",delete:"삭제",printLog:"인쇄 기록"},permission:{noReprint:"이 아카이브를 재인쇄할 권한이 없습니다",noAddToQueue:"대기열에 추가할 권한이 없습니다",noUpdateArchives:"아카이브를 업데이트할 권한이 없습니다",noUploadFiles:"파일을 업로드할 권한이 없습니다",noDownload:"아카이브를 다운로드할 권한이 없습니다",noCopyLink:"다운로드 링크를 복사할 권한이 없습니다",noDelete:"이 아카이브를 삭제할 권한이 없습니다",noCreate:"아카이브를 만들 권한이 없습니다"},platePicker:{title:"미리 볼 플레이트 선택",hint:"이 아카이브에는 여러 플레이트가 있습니다. G코드 뷰어에서 열 플레이트를 선택하세요.",plateLabel:"플레이트 {{index}}",objectCount:"{{count}}개 객체",objectCount_plural:"{{count}}개 객체",noGcode:"이 아카이브에는 미리 볼 슬라이싱된 G코드가 없습니다. Bambu Studio에서 먼저 슬라이싱하세요."},card:{previousPlate:"이전 플레이트",nextPlate:"다음 플레이트",plateNumber:"플레이트 {{index}}",moreOptions:"더 많은 옵션은 우클릭",addToFavorites:"즐겨찾기에 추가",removeFromFavorites:"즐겨찾기에서 제거",cancelled:"취소됨",failed:"실패",duplicate:"중복",duplicateTitle:"이 모델은 이전에 인쇄된 적이 있습니다",openSource3mf:"Bambu Studio에서 소스 3MF 열기 (더 많은 옵션은 우클릭)",downloadF3d:"Fusion 360 디자인 파일 다운로드",viewTimelapse:"타임랩스 보기",viewPhoto:"사진 1장 보기",viewPhotos:"사진 {{count}}장 보기",openFolder:"폴더 열기: {{name}}",slicedFile:"슬라이싱된 파일 - 인쇄 준비 완료",sourceFile:"소스 파일만 - AMS 매핑 없음",gcode:"GCODE",source:"소스",project:"프로젝트: {{name}}",estimated:"예상: {{time}}",actual:"실제: {{time}}",accuracy:"정확도: {{percent}}%",filament:"{{weight}}g",layer:"{{count}}층",layers:"{{count}}층",object:"{{count}}개 객체",objects:"{{count}}개 객체",slicedFor:"{{model}}용으로 슬라이싱됨",uploadedBy:"업로드한 사용자",noPermissionReprint:"재인쇄 권한이 없습니다",noFileForReprint:"3MF 파일 없음 — 인쇄 기록 시 프린터에서 파일을 다운로드할 수 없었습니다",noPermissionEdit:"아카이브를 편집할 권한이 없습니다",noPermissionDelete:"아카이브를 삭제할 권한이 없습니다",reprint:"재인쇄",schedulePrint:"인쇄 예약",schedule:"예약",openInBambuStudio:"슬라이서에서 열기",openInBambuStudioToSlice:"슬라이스하려면 슬라이서에서 열기",slice:"슬라이스",externalLink:"외부 링크",makerWorld:"MakerWorld: {{designer}}",viewProject:"프로젝트 보기",noExternalLink:"외부 링크 없음",preview3d:"3D 미리보기",download:"다운로드",edit:"편집",delete:"삭제",runsBadge:"{{count}}회 인쇄",runsBadgeTitle:"총 {{count}}회 인쇄 — {{successful}}회 성공, {{failed}}회 실패. 전체 인쇄 기록을 보려면 클릭하세요."},modal:{deleteArchive:"아카이브 삭제",deleteConfirm:'"{{name}}"을(를) 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.',deleteButton:"삭제",removeSource3mf:"소스 3MF 제거",removeSource3mfConfirm:'"{{name}}"에서 소스 3MF 파일을 제거하시겠습니까? 원본 슬라이서 프로젝트 파일이 삭제됩니다.',removeButton:"제거",removeF3d:"F3D 제거",removeF3dConfirm:'"{{name}}"에서 Fusion 360 디자인 파일을 제거하시겠습니까?',removeTimelapse:"타임랩스 제거",removeTimelapseConfirm:'"{{name}}"에서 타임랩스 영상을 제거하시겠습니까?',timelapse:"{{name}} - 타임랩스",selectTimelapse:"타임랩스 선택",selectTimelapseDesc:"자동 일치 항목 없음. 이 인쇄의 타임랩스를 선택하세요:",deleteArchives:"아카이브 삭제",deleteArchivesConfirm:"{{count}}개 아카이브를 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.",deleteCount:"{{count}}개 삭제",deletePurgeStats:"빠른 통계에서도 이 인쇄 항목 제거 (필라멘트, 시간, 비용, 에너지)"},page:{title:"아카이브",printsCount:"{{total}}개 중 {{filtered}}개 인쇄",dropFilesHere:".3mf 파일을 여기에 놓으세요",releaseToUpload:"놓아서 업로드",only3mfSupported:".3mf 파일만 지원됩니다",close:"닫기",selected:"{{count}}개 선택됨",selectAll:"전체 선택",tags:"태그",project:"프로젝트",favorite:"즐겨찾기",delete:"삭제",toggledFavorites:"{{count}}개 아카이브의 즐겨찾기가 변경됨",failedUpdateFavorites:"즐겨찾기 업데이트 실패",archivesDeleted:"{{count}}개 아카이브가 삭제됨",failedDeleteArchives:"아카이브 삭제 실패",photoDeleted:"사진이 삭제됨",failedDeletePhoto:"사진 삭제 실패"},list:{name:"이름",printer:"프린터",date:"날짜",size:"크기",actions:"작업",hasTimelapse:"타임랩스 있음"},log:{date:"날짜",printName:"인쇄 이름",printer:"프린터",user:"사용자",status:"상태",duration:"소요 시간",filament:"필라멘트",allPrinters:"모든 프린터",allUsers:"모든 사용자",allStatuses:"모든 상태",cancelled:"취소됨",skipped:"건너뜀",dateFrom:"시작",dateTo:"종료",noEntries:"인쇄 로그 항목이 없습니다",showing:"{{total}}개 중 {{count}}개 표시",rowsPerPage:"행",page:"페이지",prev:"이전",next:"다음",clearLog:"로그 지우기",clearLogTitle:"인쇄 로그 지우기",clearLogConfirm:"모든 인쇄 로그 항목이 영구적으로 삭제됩니다. 아카이브와 대기열 항목은 영향받지 않습니다. 이 작업은 취소할 수 없습니다. 계속하시겠습니까?",clearLogButton:"모두 지우기",cleared:"{{count}}개 로그 항목이 지워졌습니다",clearFailed:"인쇄 로그 지우기 실패"},runLog:{title:"인쇄 기록",modalTitle:"인쇄 기록 — {{name}}",modalTitleFallback:"이 아카이브",empty:"이 아카이브에 대해 기록된 인쇄 이벤트가 없습니다.",col:{date:"날짜",status:"상태",duration:"소요 시간",filament:"필라멘트",cost:"비용"},status:{completed:"완료",failed:"실패",cancelled:"취소됨",stopped:"중지됨",skipped:"건너뜀",printing:"인쇄 중"}}},queue:{title:"인쇄 대기열",subtitle:"인쇄 작업을 예약하고 관리하세요",addToQueue:"대기열에 추가",print:"인쇄",reprint:"재인쇄",schedulePrint:"인쇄 예약",editQueueItem:"대기열 항목 편집",printToPrinters:"{{count}}개 프린터에 인쇄",queueToPrinters:"{{count}}개 프린터에 대기",queueSelectedPlates:"{{count}}개 플레이트 대기",selectAllPlates:"{{count}}개 플레이트 전체 선택",deselectAll:"전체 해제",printQueued:"인쇄가 대기열에 추가됨",itemsQueued:"{{count}}개 항목이 대기열에 추가됨",sending:"전송 중...",sendingProgress:"{{current}}/{{total}} 전송 중...",adding:"추가 중...",addingProgress:"{{current}}/{{total}} 추가 중...",savingProgress:"{{current}}/{{total}} 저장 중...",clearQueue:"대기열 지우기",clearHistory:"기록 지우기",emptyQueue:"대기열이 비어 있습니다",position:"위치",scheduledTime:"예약 시간",moveUp:"위로 이동",moveDown:"아래로 이동",startNow:"지금 시작",printingInProgress:"인쇄 중...",viewArchive:"아카이브 보기",viewInFileManager:"파일 관리자에서 보기",itemCount:"{{count}}개 항목",itemCount_plural:"{{count}}개 항목",dragToReorder:"드래그하여 순서 변경 (즉시만)",reorderHint:"위치는 즉시 항목에만 영향을 줍니다. 예약된 항목은 설정된 시간에 실행됩니다.",sjf:{label:"SJF",tooltip:"최단 작업 우선 — 스케줄러가 짧은 인쇄를 우선합니다"},addedBy:"{{name}}님이 추가함",nextInQueue:"다음 대기",clearPlateSuccess:"플레이트 비워짐 — 다음 인쇄 준비 완료",plateNumber:"플레이트 {{index}}",quantity:"수량",quantityHint:"{{count}}개 대기열 항목 생성",activeBatches:"활성 배치",batchProgress:"{{total}}개 중 {{completed}}개 완료",cancelBatch:"나머지 취소",batchCancelled:"남은 배치 항목이 취소되었습니다",cancelBatchConfirmTitle:"배치 취소",cancelBatchConfirmMessage:"이 배치의 남은 대기 항목을 모두 취소하시겠습니까?",batch:"배치",sections:{currentlyPrinting:"현재 인쇄 중",queued:"대기 중",history:"기록"},status:{pending:"대기 중",waiting:"기다리는 중",printing:"인쇄 중",paused:"일시정지",completed:"완료",failed:"실패",skipped:"건너뜀",cancelled:"취소됨"},summary:{printing:"인쇄 중",queued:"대기 중",totalTime:"총 대기열 시간",totalWeight:"총 대기열 무게",history:"기록"},filter:{allPrinters:"모든 프린터",unassigned:"미할당",allStatus:"모든 상태",allLocations:"모든 위치",any:"전체"},sort:{byPosition:"위치별 정렬",byName:"이름별 정렬",byPrinter:"프린터별 정렬",bySchedule:"예약별 정렬",byDate:"날짜별 정렬",ascendingOldest:"오름차순 (오래된 것 먼저)",descendingNewest:"내림차순 (최신 것 먼저)"},badges:{staged:"준비됨",requiresPrevious:"이전 성공 필요",autoPowerOff:"자동 전원 끄기",gcodeInjection:"G코드"},empty:{title:"예약된 인쇄 없음",description:'아카이브 페이지의 컨텍스트 메뉴에서 "예약" 옵션을 사용하거나 파일을 드래그 앤 드롭하여 시작하세요.'},time:{asap:"즉시",overdue:"기한 초과",now:"지금",lessThanMinute:"1분 이내",inMinutes:"{{count}}분 후",inHours:"{{count}}시간 후"},actions:{stopPrint:"인쇄 정지",startPrint:"인쇄 시작",requeue:"재대기"},bulkEdit:{title:"{{count}}개 항목 편집",title_plural:"{{count}}개 항목 편집",description:"변경된 설정만 선택된 항목에 적용됩니다.",printer:"프린터",noChange:"— 변경 없음 —",queueOptions:"대기열 옵션",staged:"준비됨 (수동 시작)",autoPowerOff:"인쇄 후 자동 전원 끄기",requirePrevious:"이전 성공 필요",printOptions:"인쇄 옵션",bedLevelling:"베드 레벨링",flowCalibration:"유량 캘리브레이션",vibrationCalibration:"진동 캘리브레이션",layerInspection:"첫 번째 층 검사",timelapse:"타임랩스",useAms:"AMS 사용",applyChanges:"변경사항 적용",selectAll:"전체 선택",deselectAll:"전체 해제",selected:"{{count}}개 선택됨",editSelected:"선택 항목 편집",cancelSelected:"선택 항목 취소"},confirm:{cancelTitle:"예약된 인쇄 취소",cancelMessage:'"{{name}}"을(를) 취소하시겠습니까?',stopTitle:"인쇄 정지",stopMessage:'"{{name}}"의 현재 인쇄를 정지하시겠습니까? 프린터의 인쇄 작업이 취소됩니다.',removeTitle:"기록에서 제거",removeMessage:'대기열 기록에서 "{{name}}"을(를) 제거하시겠습니까?',clearHistoryTitle:"기록 지우기",clearHistoryMessage:"기록에서 {{count}}개 항목을 모두 제거하시겠습니까?",cancelButton:"인쇄 취소",stopButton:"인쇄 정지",thisPrint:"이 인쇄",thisItem:"이 항목"},toast:{cancelled:"대기열 항목이 취소되었습니다",cancelFailed:"항목 취소 실패",removed:"대기열 항목이 제거되었습니다",removeFailed:"항목 제거 실패",stopped:"인쇄가 정지되었습니다",stopFailed:"인쇄 정지 실패",released:"인쇄가 대기열에 릴리스되었습니다",startFailed:"인쇄 시작 실패",reorderFailed:"대기열 순서 변경 실패",historyCleared:"{{count}}개 기록 항목이 지워졌습니다",clearHistoryFailed:"기록 지우기 실패",updateFailed:"항목 업데이트 실패",bulkCancelled:"{{count}}개 항목이 취소되었습니다",bulkCancelFailed:"항목 취소 실패"},timeline:{listView:"목록",timelineView:"타임라인",unassigned:"미할당",noData:"이 날에 예약된 인쇄 없음",allDoneBy:"모든 인쇄 예상 완료 시간: {{time}}",staged:"준비됨",filterAll:"모두 표시",filterPrinting:"인쇄 중",filterQueued:"대기 중",time:{anyMoment:"잠시 후",minutesLeft:"{{minutes}}분 남음",hoursLeft:"{{hours}}시간 남음",hoursMinutesLeft:"{{hours}}시간 {{minutes}}분 남음"},day:{previous:"이전 날",next:"다음 날",today:"오늘"}},permissions:{noStopPrint:"인쇄를 정지할 권한이 없습니다",noStartPrint:"인쇄를 시작할 권한이 없습니다",noEdit:"이 대기열 항목을 편집할 권한이 없습니다",noCancel:"이 대기열 항목을 취소할 권한이 없습니다",noRequeue:"항목을 재대기할 권한이 없습니다",noRemove:"이 대기열 항목을 제거할 권한이 없습니다",noClearHistory:"모든 기록을 지울 권한이 없습니다",noEditItems:"대기열 항목을 편집할 권한이 없습니다",noCancelItems:"대기열 항목을 취소할 권한이 없습니다"},filamentShort:{rowBadge:"할당된 스풀의 필라멘트가 부족합니다",rowTooltip:"디스패치 스케줄러가 이 항목을 표시했습니다. 재생 버튼을 클릭하여 슬롯별 부족량을 확인하고 인쇄 여부를 결정하세요.",confirmTitle:"필라멘트 부족",confirmIntro:"할당된 스풀이 하나 이상의 슬롯을 채울 수 없습니다. 그래도 인쇄하시겠습니까?",lineItem:"슬롯 {{slot}}: {{required}}g 필요, {{remaining}}g 남음",unknown:"알 수 없음",printAnyway:"그냥 인쇄"}},backgroundDispatch:{unknownFile:"알 수 없는 파일",unknownPrinter:"알 수 없는 프린터",startingPrints:"인쇄 시작 중",progressSummary:"{{complete}}/{{total}} 완료 • 전송됨: {{dispatched}} • 처리 중: {{processing}}",expandDetails:"전송 상세 펼치기",collapseDetails:"전송 상세 접기",dismissToast:"전송 알림 닫기",cancelDispatchJob:"전송 작업 취소",cancel:"취소",cancelling:"취소 중…",awaitingPrinter:"프린터 대기 중…",status:{dispatched:"전송됨",processing:"처리 중",completed:"완료",failed:"실패",cancelled:"취소됨"},toast:{cancellingUpload:"업로드 취소 중...",cancelled:"전송이 취소되었습니다",cancelFailed:"전송 취소 실패",completeWithFailures:"백그라운드 전송 완료: {{completed}}개 성공, {{failed}}개 실패",completeSuccess:"백그라운드 전송 완료: {{completed}}개 성공",printStartedRemaining:"{{completed}}개 인쇄 시작, {{remaining}}개 더 전송 중..."}},stats:{title:"대시보드",subtitle:"위젯을 드래그하여 정렬하세요. 눈 아이콘을 클릭하여 숨기세요.",overview:"개요",totalPrints:"총 인쇄 수",successRate:"성공률",totalPrintTime:"총 인쇄 시간",printTime:"인쇄 시간",totalFilament:"총 사용 필라멘트",filamentUsed:"사용된 필라멘트",filamentCost:"필라멘트 비용",totalCost:"총 비용",energyUsed:"사용된 에너지",energyCost:"에너지 비용",energyWarmingUpTooltip:"에너지 추적이 시간별 스냅샷을 수집 중입니다. 날짜 범위 합계는 선택한 범위 이전에 하나 이상의 스냅샷이 존재하면 정확해집니다. 초기 값이 적게 집계될 수 있습니다.",averagePrintTime:"평균 인쇄 시간",printsPerDay:"일일 인쇄 수",byPrinter:"프린터별",printsByPrinter:"프린터별 인쇄",byMaterial:"재료별",byMonth:"월별",last7Days:"최근 7일",last30Days:"최근 30일",last90Days:"최근 90일",allTime:"전체 기간",quickStats:"빠른 통계",printActivity:"인쇄 활동",filamentTypes:"필라멘트 종류",filamentTrends:"필라멘트 추세",failureAnalysis:"실패 분석",timeAccuracy:"시간 정확도",successful:"성공:",failed:"실패:",cancelled:"취소됨:",perfectEstimate:"100% = 완벽한 예상",noTimeAccuracyData:"아직 시간 정확도 데이터 없음",noFilamentData:"필라멘트 데이터 없음",noPrinterData:"프린터 데이터 없음",noPrintData:"인쇄 데이터 없음",noPrintDataLast30Days:"최근 30일 인쇄 데이터 없음",failureReasons:"실패 원인",topFailureReasons:"주요 실패 원인",failedPrintsCount:"{{total}}개 인쇄 중 {{failed}}개 실패",lastWeekRate:"지난 주: {{rate}}%",resetLayout:"레이아웃 초기화",recalculateCosts:"비용 재계산",recalculateCostsHint:"현재 필라멘트 가격으로 모든 아카이브 비용 재계산",exportStats:"통계 내보내기",exportAsCsv:"CSV로 내보내기",exportAsExcel:"Excel로 내보내기",hiddenCount:"{{count}}개 숨겨짐",exportDownloaded:"내보내기 다운로드됨",exportFailed:"내보내기 실패",layoutReset:"레이아웃이 초기화되었습니다",recalculatedCosts:"{{count}}개 아카이브의 비용이 재계산되었습니다",recalculateFailed:"비용 재계산 실패",loadingStats:"통계 로딩 중...",noPermissionResetLayout:"레이아웃을 초기화할 권한이 없습니다",noPermissionRecalculate:"비용을 재계산할 권한이 없습니다",noPrintDataInRange:"선택한 범위에 인쇄 데이터 없음",periodFilament:"기간 필라멘트",periodCost:"기간 비용",avgPerPrint:"인쇄당 평균",usageOverTime:"시간별 사용량",filamentByWeight:"무게",printDuration:"인쇄 시간",printerUtilization:"프린터 사용률",filamentSuccess:"재료별 성공률",printHabits:"인쇄 습관",printTimeOfDay:"시간대별 인쇄",colorDistribution:"색상 분포",noColorData:"색상 데이터 없음",records:"기록",longestPrint:"최장 인쇄",heaviestPrint:"가장 무거운 인쇄",mostExpensivePrint:"가장 비싼 인쇄",busiestDay:"가장 바쁜 날",successStreak:"연속 성공",streakPrint:"연속 인쇄",streakPrints:"{{count}}번 연속 인쇄",printerStats:"프린터 통계",hours:"시간",avgPrints:"평균 인쇄",noArchiveData:"인쇄 데이터 없음",filamentByTime:"시간",avgWeight:"평균 무게",avgTime:"평균 시간",filamentByPrints:"인쇄",timeframe:{today:"오늘","this-week":"이번 주","this-month":"이번 달","last-7":"최근 7일","last-30":"최근 30일","last-90":"최근 90일","this-year":"올해","all-time":"전체 기간",custom:"사용자 지정 범위",from:"시작",to:"종료"},allUsers:"모든 사용자",noUser:"사용자 없음 (시스템)",filterByUser:"사용자별 필터"},maintenance:{title:"유지보수",overview:"개요",allOk:"모든 유지보수 최신 상태",dueCount:"{{count}}개 항목 예정",dueCount_plural:"{{count}}개 항목 예정",warningCount:"{{count}}개 경고",warningCount_plural:"{{count}}개 경고",totalPrintTime:"총 인쇄 시간",nextMaintenance:"다음 유지보수",nothingDue:"예정 없음",tasks:"작업",lastPerformed:"마지막 수행",interval:"간격",hoursRemaining:"{{hours}}시간 남음",hoursOverdue:"{{hours}}시간 초과",markDone:"완료로 표시",performMaintenance:"유지보수 수행",history:"기록",noHistory:"유지보수 기록 없음",editPrintHours:"인쇄 시간 편집",currentHours:"현재 시간",statusTab:"상태",settingsTab:"설정",overdueCount:"{{count}}개 초과",dueSoonCount:"{{count}}개 곧 예정",dueSoon:"곧 예정",allGood:"모두 정상",overdueBy:"{{duration}} 초과",dueIn:"{{duration}} 후 예정",timeLeft:"{{duration}} 남음",day:"1일",days:"{{count}}일",week:"1주",weeks:"{{count}}주",month:"1개월",months:"{{count}}개월",year:"1년",maintenanceTypes:"유지보수 유형",maintenanceTypesDescription:"시스템 유형 및 사용자 지정 유지보수 작업",addCustomType:"사용자 지정 유형 추가",restoreDefaults:"기본 작업 복원",intervalType:"간격 유형",intervalValue:"간격 ({{type}})",icon:"아이콘",documentationLink:"문서 링크 (선택사항)",assignToPrinters:"프린터에 할당",selectAtLeastOnePrinter:"최소 한 개의 프린터를 선택하세요",addType:"유형 추가",custom:"사용자 지정",printHours:"인쇄 시간",calendarDays:"달력 일수",exampleName:"예: HEPA 필터 교체",viewDocumentation:"문서 보기",timeBasedInterval:"시간 기반 간격",intervalOverrides:"간격 재정의",intervalOverridesDescription:"특정 프린터의 간격 사용자 지정",assignedToPrinters:"할당된 프린터:",noPrintersAssigned:"할당된 프린터 없음",addPrinterShort:"추가:",printersAssignedClick:"{{count}}개 프린터 할당됨 - 클릭하여 관리",removeFromPrinter:"이 프린터에서 제거",types:{lubricateCarbonRods:"카본 로드 윤활",lubricateRails:"리니어 레일 윤활",cleanNozzle:"노즐/핫엔드 청소",checkBelts:"벨트 장력 확인",cleanBuildPlate:"빌드 플레이트 청소",checkExtruder:"압출기 기어 확인",checkCooling:"냉각 팬 확인",generalInspection:"일반 점검",cleanCarbonRods:"카본 로드 청소",lubricateSteelRods:"스틸 로드 윤활",cleanSteelRods:"스틸 로드 청소",cleanLinearRails:"리니어 레일 청소",checkPtfeTube:"PTFE 튜브 확인",replaceHepaFilter:"HEPA 필터 교체",replaceCarbonFilter:"활성탄 필터 교체",lubricateLeftNozzleRail:"좌측 노즐 레일 윤활"},maintenanceComplete:"유지보수가 완료로 표시되었습니다",typeUpdated:"유지보수 유형이 업데이트되었습니다",typeDeleted:"유지보수 유형이 삭제되었습니다",defaultsRestored:"{{count}}개 기본 작업이 복원되었습니다",printHoursUpdated:"인쇄 시간이 업데이트되었습니다",printerAssigned:"프린터가 할당되었습니다",printerRemoved:"프린터가 제거되었습니다",deleteTypeConfirm:'"{{name}}"을(를) 삭제하시겠습니까?',deleteSystemTypeTitle:"기본 유지보수 작업을 삭제하시겠습니까?",deleteSystemTypeMessage:'기본 유지보수 작업 "{{name}}"을(를) 삭제하시겠습니까?',noPermissionUpdate:"유지보수 항목을 업데이트할 권한이 없습니다",noPermissionPerform:"유지보수를 수행할 권한이 없습니다",noPermissionEditTypes:"유지보수 유형을 편집할 권한이 없습니다",noPermissionDeleteTypes:"유지보수 유형을 삭제할 권한이 없습니다",noPermissionEditHours:"인쇄 시간을 편집할 권한이 없습니다",noPermissionRemovePrinter:"프린터 할당을 제거할 권한이 없습니다",noPermissionAssignPrinter:"프린터를 할당할 권한이 없습니다",noPermissionEditIntervals:"간격을 편집할 권한이 없습니다",configureSettings:"유지보수 유형 및 간격 설정"},settings:{title:"설정",general:"일반",tabs:{general:"일반",smartPlugs:"스마트 플러그",notifications:"알림",queue:"워크플로우",filament:"필라멘트",network:"네트워크",apiKeys:"API 키",virtualPrinter:"가상 프린터",spoolbuddy:"SpoolBuddy",failureDetection:"실패 감지",users:"인증",backup:"백업",emailAuth:"이메일 인증",ldap:"LDAP",twoFa:"이중 인증",oidc:"SSO / OIDC",security:"보안"},spoolbuddy:{infoTitle:"SpoolBuddy 기기",infoBody:"SpoolBuddy 키오스크는 하트비트를 통해 자동으로 등록됩니다. 더 이상 사용하지 않거나 데몬 충돌로 인한 중복이 있는 경우 여기서 기기를 등록 해제하세요.",duplicatesTitle:"{{count}}개 기기 등록됨",duplicatesBody:"첫 번째로 등록된 기기만 키오스크 UI에서 사용됩니다. 충돌로 인한 오래된 중복이 있으면 등록 해제하세요 — 온라인 기기는 다음 하트비트에서 자동으로 재등록됩니다.",empty:"아직 등록된 SpoolBuddy 기기가 없습니다.",online:"온라인",offline:"오프라인",unregister:"등록 해제",unregisterSuccess:"기기 등록 해제됨",unregisterError:"기기 등록 해제 실패",confirmTitle:"SpoolBuddy 기기를 등록 해제하시겠습니까?",confirmBody:'데이터베이스에서 "{{hostname}}" ({{deviceId}})를 제거합니다. 기기가 온라인이면 다음 하트비트에서 자동으로 재등록됩니다.',ipAddress:"IP 주소",firmware:"펌웨어",lastSeen:"마지막 확인",daemonUptime:"데몬 가동 시간",systemUptime:"시스템 가동 시간",never:"없음",nfc:"NFC",scale:"저울",cpuTemp:"CPU 온도",memory:"메모리",disk:"디스크",update:"업데이트",updateConfirmTitle:"Spoolbuddy 데몬을 업데이트하시겠습니까?",updateConfirmBody:'"{{hostname}}"에서 소프트웨어 업데이트를 실행하시겠습니까? 업데이트가 적용되면 데몬이 재시작됩니다.',restartBrowser:"브라우저 재시작",restartBrowserConfirmTitle:"키오스크 브라우저를 재시작하시겠습니까?",restartBrowserConfirmBody:'"{{hostname}}"의 키오스크 브라우저를 재시작하시겠습니까? 화면이 잠시 꺼집니다.',restartDaemon:"데몬 재시작",restartDaemonConfirmTitle:"Spoolbuddy 데몬을 재시작하시겠습니까?",restartDaemonConfirmBody:'"{{hostname}}"의 Spoolbuddy 데몬을 재시작하시겠습니까? 기기가 몇 초 동안 오프라인 상태가 됩니다.',reboot:"재부팅",rebootConfirmTitle:"기기를 재부팅하시겠습니까?",rebootConfirmBody:'"{{hostname}}"을(를) 재부팅하시겠습니까? 기기가 약 1분 동안 오프라인 상태가 됩니다.',shutdown:"종료",shutdownConfirmTitle:"기기를 종료하시겠습니까?",shutdownConfirmBody:'"{{hostname}}"을(를) 종료하시겠습니까? 다시 켜려면 물리적 접근이 필요합니다.',commandConfirm:"확인",commandQueued:"명령이 대기열에 추가됨",commandError:"명령 전송 실패",cpuLoad:"CPU 부하"},ldap:{title:"LDAP 인증",enabledDesc:"LDAP 인증이 활성화되어 있습니다",disabledDesc:"LDAP 인증이 비활성화되어 있습니다",disabledHint:"아래에서 LDAP 설정을 구성하고 저장한 후 활성화하세요.",enabled:"LDAP 인증 활성화됨",disabled:"LDAP 인증 비활성화됨",feature1:"사용자가 LDAP 자격 증명으로 로그인 가능",feature2:"로컬 관리자 계정이 대체 수단으로 유지됨",feature3:"LDAP 그룹이 로그인 시 Bambuddy 그룹에 매핑됨",serverConfig:"LDAP 서버 설정",serverUrl:"서버 URL",serverUrlHint:"SSL에는 ldaps://, StartTLS에는 ldap:// 사용",security:"보안",securityHint:"StartTLS는 일반 연결을 TLS로 업그레이드합니다. LDAPS는 처음부터 TLS를 사용합니다.",bindDn:"바인드 DN (서비스 계정)",bindPassword:"바인드 비밀번호",searchBase:"검색 기반 DN",userFilter:"사용자 검색 필터",userFilterHint:"{username}은 로그인 사용자명으로 대체됩니다. OpenLDAP의 경우 (uid={username})을 사용하세요.",autoProvision:"사용자 자동 프로비저닝",autoProvisionHint:"첫 LDAP 로그인 시 자동으로 Bambuddy 계정 생성",defaultGroup:"기본 그룹",defaultGroupNone:"— 없음 (대체 없음) —",defaultGroupHint:"LDAP 사용자가 인증되었지만 매핑된 LDAP 그룹에 없을 때 할당되는 대체 그룹. 비워두면 매핑되지 않은 사용자에게 권한이 없습니다.",groupMapping:"그룹 매핑 (JSON)",groupMappingHint:"LDAP 그룹 DN을 Bambuddy 그룹에 매핑합니다. 사용 가능한 그룹: ",testConnection:"연결 테스트",settingsSaved:"LDAP 설정이 저장되었습니다",errors:{serverRequired:"LDAP 서버 URL이 필요합니다",searchBaseRequired:"검색 기반 DN이 필요합니다",enableAuthFirst:"먼저 인증을 활성화하세요",configureLdapFirst:"먼저 LDAP 설정을 저장하세요"},advanced:"고급"},email:{smtpSettings:"SMTP 설정",smtpHost:"SMTP 서버",smtpPort:"SMTP 포트",security:"보안",authentication:"인증",username:"사용자명",password:"비밀번호",fromEmail:"발신 이메일",fromName:"발신자 이름",testConnection:"SMTP 연결 테스트",testRecipient:"테스트 수신자 이메일",sendTest:"테스트 이메일 전송",sending:"전송 중...",save:"설정 저장",saving:"저장 중...",advancedAuth:"고급 인증",advancedAuthEnabled:"고급 인증이 활성화되어 있습니다",advancedAuthEnabledDesc:"이메일 기반 사용자 관리 기능이 활성화되어 있습니다. 신규 사용자는 이메일로 자동 생성된 비밀번호를 받으며, 사용자는 비밀번호 찾기 기능으로 비밀번호를 재설정할 수 있습니다.",advancedAuthDisabled:"고급 인증이 비활성화되어 있습니다",advancedAuthDisabledDesc:"이메일 기반 사용자 관리 기능을 활성화하려면 고급 인증을 활성화하세요.",enable:"활성화",disable:"비활성화",feature1:"비밀번호가 자동 생성되어 신규 사용자에게 이메일로 전송됨",feature2:"사용자가 사용자명 또는 이메일로 로그인 가능",feature3:"비밀번호 찾기 기능 사용 가능",feature4:"관리자가 이메일로 사용자 비밀번호 재설정 가능",errors:{requiredFields:"모든 필수 항목을 입력하세요",usernameRequired:"인증이 활성화된 경우 사용자명이 필요합니다",enterTestEmail:"테스트 이메일 주소를 입력하세요",smtpServerAndEmail:"테스트 전에 SMTP 서버와 발신 이메일을 입력하세요",usernamePasswordRequired:"인증이 활성화된 경우 사용자명과 비밀번호가 필요합니다",configureSmtpFirst:"먼저 SMTP 설정을 구성하고 테스트하세요",enableAuthFirst:"이메일 기반 기능을 사용하려면 먼저 인증을 활성화하세요."},success:{settingsSaved:"SMTP 설정이 성공적으로 저장되었습니다"},securityOptions:{starttls:"STARTTLS (포트 587)",ssl:"SSL/TLS (포트 465)",none:"없음 (포트 25)"},authOptions:{enabled:"활성화됨",disabled:"비활성화됨"}},appearance:"모양",notifications:"알림",smartPlugs:"스마트 플러그",spoolman:"Spoolman",updates:"업데이트",language:"언어",languageDescription:"선호하는 언어를 선택하세요",theme:"테마",themeLight:"라이트",themeDark:"다크",themeSystem:"시스템",defaultView:"기본 보기",defaultViewDescription:"앱을 열 때 표시할 페이지",checkForUpdates:"업데이트 확인",autoUpdate:"자동 업데이트",currentVersion:"현재 버전",latestVersion:"최신 버전",upToDate:"최신 상태입니다",updateAvailable:"업데이트 가능",notificationLanguage:"알림 언어",notificationLanguageDescription:"푸시 알림 언어",bedCooledThreshold:"베드 냉각 임계값",bedCooledThresholdDescription:"인쇄 후 베드가 냉각된 것으로 간주되는 온도",userNotificationsEnabled:"사용자 알림",userNotificationsEnabledDescription:"사용자 알림 메뉴 및 인쇄 작업 이벤트에 대한 이메일 알림을 활성화합니다. 고급 인증이 필요합니다.",userNotificationsDisabledHint:"사용자 알림을 사용하려면 고급 인증을 활성화하세요.",notificationProviders:"알림 제공자",addProvider:"제공자 추가",editProvider:"제공자 편집",providerType:"제공자 유형",testNotification:"알림 테스트",testSuccess:"테스트 알림이 성공적으로 전송되었습니다",testFailed:"테스트 알림 전송 실패",quietHours:"방해 금지 시간",quietHoursDescription:"이 시간 동안 방해하지 않음",quietHoursStart:"시작",quietHoursEnd:"종료",events:{title:"알림 이벤트",printStart:"인쇄 시작됨",printComplete:"인쇄 완료됨",printFailed:"인쇄 실패",printStopped:"인쇄 정지됨",printProgress:"진행 마일스톤",printProgressDescription:"25%, 50%, 75%에 알림",printerOffline:"프린터 오프라인",printerError:"프린터 오류",filamentLow:"필라멘트 부족",maintenanceDue:"유지보수 예정",maintenanceDueDescription:"유지보수가 필요할 때 알림"},smartPlug:{title:"스마트 플러그",add:"스마트 플러그 추가",edit:"스마트 플러그 편집",name:"이름",ipAddress:"IP 주소",linkedPrinter:"연결된 프린터",autoOn:"자동 켜기",autoOnDescription:"인쇄 시작 시 켜기",autoOff:"자동 끄기",autoOffDescription:"인쇄 완료 후 끄기",offDelay:"끄기 지연",offDelayMinutes:"인쇄 후 분",offDelayTemp:"노즐 온도 이하일 때",currentState:"현재 상태",turnOn:"켜기",turnOff:"끄기"},filamentTracking:"필라멘트 추적",filamentTrackingDesc:"필라멘트 스풀을 추적하는 방법을 선택하세요. 내장 인벤토리를 사용하거나 외부 Spoolman 서버에 연결할 수 있습니다.",filamentChecks:"필라멘트 확인",disableFilamentWarnings:"필라멘트 경고 비활성화",disableFilamentWarningsDesc:"인쇄 또는 대기열 추가 시 필라멘트 부족 경고 표시 안 함",preferLowestFilament:"남은 필라멘트가 가장 적은 것 우선",preferLowestFilamentDesc:"여러 스풀이 일치할 때 남은 필라멘트가 가장 적은 것 사용",trackingModeBuiltIn:"내장 인벤토리",trackingModeBuiltInDesc:"RFID 자동 매칭 및 사용량 추적 포함",trackingModeSpoolmanDesc:"외부 필라멘트 관리 서버",builtInFeatureRfid:"AMS의 Bambu Lab RFID 스풀 자동 감지",builtInFeatureUsage:"인쇄당 필라멘트 소비량 추적",builtInFeatureCatalog:"스풀, 색상, K 팩터 프로필 관리",builtInFeatureThirdParty:"서드파티 스풀을 인벤토리 스풀에 할당 가능",amsSyncButton:"AMS에서 무게 동기화",amsSyncTitle:"AMS에서 스풀 무게 동기화",amsSyncMessage:"연결된 프린터의 현재 AMS 잔여% 값으로 모든 인벤토리 스풀 무게를 덮어씁니다. 손상된 무게 데이터를 복구하는 데 사용하세요. 프린터가 온라인이어야 합니다.",amsSyncing:"동기화 중...",amsSyncSuccess:"{{synced}}개 스풀 동기화됨, {{skipped}}개 건너뜀",amsSyncError:"AMS에서 무게 동기화 실패",spoolmanAmsSyncButton:"AMS에서 Spoolman 무게 동기화",spoolmanAmsSyncTitle:"AMS에서 Spoolman 스풀 무게 동기화",spoolmanAmsSyncMessage:"연결된 프린터의 현재 AMS 잔여% 값으로 모든 Spoolman 스풀 무게를 업데이트합니다. 프린터가 온라인이어야 합니다.",spoolmanAmsSyncing:"동기화 중...",spoolmanAmsSyncSuccess:"{{synced}}개 스풀 동기화됨, {{skipped}}개 건너뜀",spoolmanAmsSyncError:"AMS에서 Spoolman 무게 동기화 실패",spoolmanAmsSyncErrorUnreachable:"Spoolman 무게 동기화 실패 (Spoolman 접근 불가)",spoolmanAmsSyncErrorNotConfigured:"Spoolman 무게 동기화 실패 (Spoolman 미설정)",spoolmanNotConfigured:"Spoolman 미설정",spoolmanFilamentCatalogTitle:"Spoolman 필라멘트 카탈로그",spoolmanFilamentCatalogDesc:"Spoolman 인스턴스의 필라멘트 이름 및 공 무게. 이름과 스풀 무게는 여기서 편집 가능하며 다른 속성은 Spoolman에서 직접 관리됩니다.",spoolmanUrl:"Spoolman URL",spoolmanUrlHint:"Spoolman 서버의 URL (예: http://localhost:7912)",spoolmanConnected:"연결됨",spoolmanDisconnected:"연결 끊김",status:"상태",connect:"연결",disconnect:"연결 해제",howSyncWorks:"동기화 작동 방식",syncInfoRfidOnly:"RFID가 있는 공식 Bambu Lab 스풀만 동기화됨",syncInfoAutoCreate:"새 스풀은 첫 번째 동기화 시 Spoolman에 자동 생성됨",syncInfoThirdPartySkipped:"비 Bambu Lab 스풀 (서드파티, 리필)은 건너뜀",linkingExistingSpools:"기존 스풀 연결",linkingExistingSpoolsDesc:'기존 Spoolman 스풀을 AMS에 연결하려면 AMS 슬롯 위에 마우스를 올리고 "Spoolman에 연결"을 클릭하세요.',syncMode:"동기화 모드",syncModeAuto:"자동",syncModeManual:"수동만",syncModeAutoDesc:"변경이 감지되면 AMS 데이터가 자동으로 동기화됨",syncModeManualDesc:"수동으로 트리거할 때만 동기화",syncAmsData:"AMS 데이터 동기화",syncAmsDataDesc:"프린터 AMS 데이터를 Spoolman에 수동으로 동기화",allPrinters:"모든 프린터",noDefaultPrinter:"기본값 없음 (매번 묻기)",sidebarOrder:"사이드바 순서",saveThumbnails:"썸네일 저장",captureFinishPhoto:"완료 사진 캡처",noPrintersConfigured:"설정된 프린터 없음",archiveMode:{always:"항상 아카이브 항목 생성",never:"아카이브 항목 생성 안 함",ask:"매번 묻기"},checkForUpdatesLabel:"업데이트 확인",checkPrinterFirmware:"프린터 펌웨어 확인",includeBetaUpdates:"베타 버전 포함",includeBetaUpdatesDesc:"업데이트 확인 시 베타 및 사전 릴리스 버전에 대해 알림",enableRetry:"재시도 활성화",homeAssistantDescription:"Home Assistant를 통해 스마트 플러그 제어",environmentManagedLabel:"(환경 변수 관리)",autoEnabledViaEnv:"환경 변수를 통해 자동 활성화됨",urlFromEnvReadOnly:"HA_URL 환경 변수에서 값 설정됨 (읽기 전용)",tokenFromEnvReadOnly:"HA_TOKEN 환경 변수에서 값 설정됨 (읽기 전용)",mqttConnectedTo:"연결됨",prometheusDescription:"Prometheus 형식으로 프린터 데이터 노출",noSmartPlugsTitle:"설정된 스마트 플러그 없음",noSmartPlugsDescription:"에너지 사용량 추적 및 전원 제어 자동화를 위해 Tasmota 기반 스마트 플러그를 추가하세요.",noProvidersTitle:"설정된 제공자 없음",noProvidersDescription:"알림을 받으려면 제공자를 추가하세요.",noTemplatesAvailable:"사용 가능한 템플릿 없음. 기본 템플릿을 시드하려면 백엔드를 재시작하세요.",apiPermissionView:"프린터 상태 및 대기열 보기",apiPermissionEdit:"인쇄 대기열에서 항목 추가 및 제거",apiKeysEmptyTitle:"API 키 없음",apiKeysEmptyDescription:"외부 서비스와 통합하려면 API 키를 만드세요.",noUsersFound:"사용자를 찾을 수 없습니다",noGroupsFound:"그룹을 찾을 수 없습니다",noGroupsAvailable:"사용 가능한 그룹 없음",passwordsDoNotMatch:"비밀번호가 일치하지 않습니다",systemGroupWarning:"시스템 그룹 이름은 변경할 수 없습니다",authDisabledTitle:"인증이 비활성화되어 있습니다",authDisabledFeature1:"시스템 접근 시 로그인 필요",authDisabledFeature2:"그룹 기반 권한으로 여러 사용자 생성",authDisabledFeature3:"50개 이상의 세분화된 권한으로 접근 제어",userHasCreated:"이 사용자가 만든 항목:",userItemsQuestion:"이 항목들을 어떻게 처리하시겠습니까?",deleteUserConfirm:"이 사용자를 삭제하시겠습니까?",actionCannotBeUndone:"이 작업은 취소할 수 없습니다.",addFirstSmartPlug:"첫 번째 스마트 플러그 추가",providers:"제공자",log:"로그",testAll:"모두 테스트",testResults:"테스트 결과",testPassedCount:"{{count}}개 통과",testFailedCount:"{{count}}개 실패",messageTemplates:"메시지 템플릿",messageTemplatesDescription:"각 이벤트에 대한 알림 메시지를 사용자 지정하세요.",apiKeys:"API 키",apiKeysDescription:"외부 통합 및 웹훅을 위한 API 키를 만드세요.",createKey:"키 만들기",apiKeyCreated:"API 키가 성공적으로 생성되었습니다",apiKeyCopyWarning:"지금 이 키를 복사하세요 - 다시 표시되지 않습니다!",useInApiBrowser:"API 브라우저에서 사용",createNewApiKey:"새 API 키 만들기",keyName:"키 이름",keyNamePlaceholder:"예: Home Assistant, OctoPrint",readStatus:"상태 읽기",readStatusDescription:"프린터 상태 및 대기열 보기",manageQueue:"대기열 관리",manageQueueDescription:"인쇄 대기열에서 항목 추가 및 제거",controlPrinter:"프린터 제어",controlPrinterDescription:"인쇄 일시정지, 재개, 정지",manageLibrary:"라이브러리 관리",manageLibraryDescription:"라이브러리 파일 업로드, 이름 변경 및 삭제; MakerWorld에서 모델 가져오기",manageInventory:"재고 관리",manageInventoryDescription:"스풀 및 재고 레코드 생성, 업데이트 및 삭제. SpoolBuddy 키오스크(NFC 스캔, 저울 측정값, 키오스크 시스템 명령)에 필요합니다.",libraryBadge:"라이브러리",inventoryBadge:"재고",cloudAccess:"클라우드 접근 허용",cloudAccessDescription:"사용자를 대신하여 Bambu Cloud 프리셋 및 필라멘트를 읽습니다. Bambu Cloud에 로그인되어 있어야 합니다.",cloudBadge:"클라우드",legacyKey:"레거시",legacyKeyTooltip:"사용자별 소유권 이전에 생성됨. 클라우드 접근을 사용하려면 재생성하세요",unnamedKey:"이름 없는 키",lastUsed:"마지막 사용",read:"읽기",control:"제어",createFirstKey:"첫 번째 키 만들기",webhookEndpoints:"웹훅 엔드포인트",webhookApiKeyHint:"X-API-Key 헤더에 API 키를 사용하세요.",webhook:{getAllStatus:"모든 프린터 상태 가져오기",getSpecificStatus:"특정 프린터 상태 가져오기",addToQueue:"인쇄 대기열에 추가",pausePrint:"인쇄 일시정지",resumePrint:"인쇄 재개",stopPrint:"인쇄 정지"},apiBrowser:"API 브라우저",apiBrowserDescription:"사용 가능한 모든 API 엔드포인트를 탐색하고 테스트하세요.",apiKeyForTesting:"테스트용 API 키",apiKeyPlaceholder:"인증된 엔드포인트를 테스트하려면 API 키를 여기에 붙여넣으세요...",apiKeyHint:"이 키는 요청과 함께 X-API-Key 헤더로 전송됩니다.",deleteApiKeyTitle:"API 키 삭제",deleteApiKeyMessage:"이 API 키를 삭제하시겠습니까? 이 키를 사용하는 모든 통합이 작동을 멈춥니다.",deleteKey:"키 삭제",amsDisplayThresholds:"AMS 표시 임계값",amsThresholdsDescription:"AMS 습도 및 온도 표시기의 색상 임계값을 설정하세요.",humidity:"습도",goodGreen:"좋음 (녹색)",fairOrange:"보통 (주황색)",aboveFairBad:"보통 임계값 초과 시 빨간색 (나쁨)으로 표시",fairAlsoDryingThreshold:"이 임계값은 자동 건조 활성화 시 트리거로도 사용됨",temperature:"온도",goodBlue:"좋음 (파란색)",aboveFairHot:"보통 임계값 초과 시 빨간색 (뜨거움)으로 표시",historyRetention:"기록 보존",keepSensorHistory:"센서 기록 보존 기간",historyRetentionDescription:"오래된 습도 및 온도 데이터가 자동으로 삭제됩니다",defaultPrintOptions:"기본 인쇄 옵션",defaultPrintOptionsDescription:"새 인쇄 시작 시 기본값을 설정하세요. 인쇄 대화 상자에서 인쇄별로 재정의할 수 있습니다.",defaultBedLevelling:"베드 레벨링",defaultBedLevellingDesc:"인쇄 전 자동 베드 레벨링",defaultFlowCali:"유량 캘리브레이션",defaultFlowCaliDesc:"압출 유량 캘리브레이션",defaultVibrationCali:"진동 캘리브레이션",defaultVibrationCaliDesc:"링잉 아티팩트 감소",defaultLayerInspect:"첫 번째 층 검사",defaultLayerInspectDesc:"첫 번째 층 AI 검사",defaultTimelapse:"타임랩스",defaultTimelapseDesc:"타임랩스 영상 녹화",staggeredStart:"엇갈린 시작",staggeredStartDescription:"다중 프린터 일괄 시작 시 기본 그룹 크기 및 간격. 인쇄 모달에서 배치별로 재정의할 수 있습니다.",plateClear:"플레이트 비움 확인",requirePlateClear:"플레이트 비움 확인 필요",requirePlateClearDescription:"활성화하면 스케줄러가 완료된 작업이 있는 프린터에서 대기 중인 인쇄를 시작하기 전에 프린터별 플레이트 비움 확인을 기다립니다.",gcodeInjection:"G코드 주입",gcodeInjectionDescription:"자동 인쇄 시스템을 위한 인쇄 시작 및/또는 종료 시 주입할 사용자 지정 G코드를 설정하세요.",gcodeInjectionNoPrinters:"프린터가 없습니다. G코드 스니펫을 설정하려면 프린터를 추가하세요.",gcodeStartLabel:"시작 G코드",gcodeEndLabel:"종료 G코드",gcodeStartPlaceholder:"인쇄 시작 전 앞에 추가되는 G코드...",gcodeEndPlaceholder:"인쇄 종료 후 뒤에 추가되는 G코드...",staggerGroupSize:"그룹 크기",staggerGroupSizeHelp:"그룹당 동시에 시작할 프린터 수",staggerInterval:"간격 (분)",staggerIntervalHelp:"각 그룹 시작 사이의 지연",queueDrying:"대기열 자동 건조",queueDryingDescription:"대기 중인 인쇄 사이에 프린터가 유휴 상태일 때 AMS 필라멘트를 자동으로 건조합니다.",queueDryingEnabled:"자동 건조 활성화",queueDryingEnabledDescription:"프린터가 유휴 상태이고 습도가 임계값 초과 시 자동으로 AMS 건조 시작",queueDryingBlock:"건조 완료까지 대기",queueDryingBlockDescription:"건조가 완료될 때까지 인쇄 대기열을 차단합니다. 끄면 인쇄가 건조보다 우선합니다.",ambientDryingEnabled:"주변 건조",ambientDryingEnabledDescription:"대기 중인 인쇄가 없어도 습도가 임계값을 초과하면 유휴 프린터에서 자동으로 필라멘트 건조",dryingPresets:"건조 프리셋",dryingPresetsDescription:"필라멘트 유형별 온도 및 시간. AMS 2 Pro는 낮은 온도, AMS-HT는 높은 온도를 지원합니다.",dryingFilament:"필라멘트",printModal:"인쇄 모달",expandCustomMapping:"사용자 지정 매핑 기본 펼침",expandCustomMappingDescription:"여러 프린터에 인쇄할 때 프린터별 AMS 매핑을 펼친 상태로 표시",authentication:"인증",authEnabledDescription:"인스턴스가 사용자 인증으로 보안됨",authDisabledDescription:"로그인 필요 및 사용자 접근 관리를 위해 활성화",authDisabledMessage:"사용자 계정 생성, 권한 관리, Bambuddy 인스턴스 보안을 위해 인증을 활성화하세요.",enableAuthentication:"인증 활성화",currentUser:"현재 사용자",changePassword:"비밀번호 변경",admin:"관리자",users:"사용자",addUser:"사용자 추가",groups:"그룹",addGroup:"그룹 추가",system:"시스템",noDescription:"설명 없음",userCount:"{{count}}명의 사용자",permissionCount:"{{count}}개 권한",createUser:"사용자 만들기",username:"사용자명",enterUsername:"사용자명 입력",password:"비밀번호",enterPassword:"비밀번호 입력 (최소 6자)",confirmPassword:"비밀번호 확인",confirmPasswordPlaceholder:"비밀번호 확인",viewReleaseOnGitHub:"GitHub에서 릴리스 보기",turnAllPlugsOn:"모든 플러그 켜기",turnAllPlugsOff:"모든 플러그 끄기",clearNotificationLogs:"알림 로그 지우기",clearLogsMessage:"30일보다 오래된 모든 알림 로그를 영구적으로 삭제합니다. 이 작업은 취소할 수 없습니다.",clearLogs:"로그 지우기",resetUiPreferences:"UI 기본 설정 초기화",resetUiPreferencesMessage:"모든 UI 기본 설정을 기본값으로 초기화합니다: 사이드바 순서, 테마, 대시보드 레이아웃, 보기 모드, 정렬 기본 설정. 프린터, 아카이브, 서버 설정은 영향받지 않습니다. 지운 후 페이지가 새로고침됩니다.",resetPreferences:"기본 설정 초기화",deleteGroupTitle:"그룹 삭제",deleteGroupMessage:"이 그룹을 삭제하시겠습니까? 이 그룹의 사용자는 이 권한을 잃게 됩니다.",deleteGroup:"그룹 삭제",disableAuthenticationTitle:"인증 비활성화",disableAuthenticationMessage:"인증을 비활성화하시겠습니까? 이렇게 하면 로그인 없이 Bambuddy 인스턴스에 접근할 수 있게 됩니다. 모든 사용자는 데이터베이스에 유지되지만 인증은 비활성화됩니다.",disableAuthentication:"인증 비활성화",configureBambuddy:"Bambuddy 설정",systemDefault:"시스템 기본값",archiveSettings:"아카이브 설정",newWindow:"새 창",embeddedOverlay:"내장 오버레이",preferredSlicer:"선호하는 슬라이서",preferredSlicerDescription:"파일을 열 슬라이서 앱을 선택하세요",orcaslicerKnownIssuesWarning:"OrcaSlicer 2.3.2 / 2.4.0-dev에는 Bambu 제작 3MF 파일 슬라이싱을 차단하는 알려진 CLI 버그가 있습니다. 업스트림 수정이 출시될 때까지 Bambu Studio를 사용하는 것이 좋습니다.",useSlicerApi:"슬라이서 API 사용",useSlicerApiDescription:'켜면 "슬라이스" 작업이 앱 내 슬라이서 모달을 열고 슬라이서 API 사이드카를 호출합니다. 끄면 URI 스킴을 통해 데스크톱 슬라이서로 전달합니다.',slicerCard:"슬라이서",orcaslicerApiUrl:"OrcaSlicer 사이드카 URL",bambuStudioApiUrl:"Bambu Studio 사이드카 URL",slicerApiUrlDescription:"슬라이서 API 사이드카 컨테이너의 URL. SLICER_API_URL / BAMBU_STUDIO_API_URL 환경 변수 기본값을 사용하려면 비워두세요.",slicerBundles:{title:"슬라이서 번들",description:"BambuStudio에서 내보낸 프린터 프리셋 번들(.bbscfg)을 가져오세요. 가져온 후 슬라이스 요청이 JSON 프로필 트리플렛을 다시 업로드하지 않고 번들에서 이름으로 프리셋을 선택할 수 있습니다.",uploadButton:"번들 업로드",uploading:"업로드 중…",loading:"번들 로딩 중…",empty:"아직 가져온 번들 없음.",summary:"{{processCount}}개 프로세스 · {{filamentCount}}개 필라멘트 프리셋",delete:"삭제",uploadSuccess:"{{name}} 가져옴",uploadError:"번들 업로드 실패: {{message}}",deleteSuccess:"번들 제거됨",deleteError:"번들 삭제 실패: {{message}}",confirmDeleteTitle:"이 번들을 제거하시겠습니까?",confirmDeleteMessage:'"{{name}}"을(를) 참조하는 슬라이스 요청은 번들이 재가져오기될 때까지 실패합니다.'},externalCameras:"외부 카메라",costTracking:"비용 추적",printsOnly:"인쇄만",totalConsumption:"총 소비",dataManagement:"데이터 관리",storageUsage:"저장소 사용량",storageUsageDescription:"카테고리별 데이터 사용량 분류",storageUsageTotal:"총계",storageUsageErrors:"오류",storageUsageOtherBreakdown:"기타 (정적 자산, 스크립트, 구성 파일 포함)",storageUsageSystem:"시스템",storageUsageData:"데이터",storageUsageUnavailable:"저장소 사용량 정보 불가",clearNotificationLogsDescription:"30일보다 오래된 알림 로그 삭제",resetUiPreferencesDescription:"사이드바 순서, 테마, 보기 모드, 레이아웃 기본 설정 초기화. 프린터, 아카이브, 설정은 영향받지 않습니다.",enableHomeAssistant:"Home Assistant 활성화",enableMqtt:"MQTT 활성화",useTls:"TLS 사용",enableMetricsEndpoint:"메트릭 엔드포인트 활성화",availableMetrics:"사용 가능한 메트릭",editUser:"사용자 편집",deleteUserTitle:"사용자 삭제",groupName:"그룹 이름",leaveEmptyForAnonymous:"익명으로 두려면 비워두세요",leaveEmptyForNoAuth:"인증 없이 두려면 비워두세요",enterNewPassword:"새 비밀번호 입력",confirmNewPassword:"새 비밀번호 확인",enterGroupName:"그룹 이름 입력",enterDescriptionOptional:"설명 입력 (선택사항)",enterCurrentPassword:"현재 비밀번호 입력",enterNewPasswordMin6:"새 비밀번호 입력 (최소 6자)",toast:{keyCopied:"키가 클립보드에 복사되었습니다",copyFailed:"키 복사 실패",keyAddedToBrowser:"API 브라우저에 키가 추가되었습니다",clearLogsFailed:"로그 지우기 실패",uiPreferencesReset:"UI 기본 설정이 초기화되었습니다. 새로고침 중...",authDisabled:"인증이 성공적으로 비활성화되었습니다",authDisableFailed:"인증 비활성화 실패",apiKeyCreated:"API 키가 생성되었습니다",apiKeyDeleted:"API 키가 삭제되었습니다",userCreated:"사용자가 성공적으로 생성되었습니다",userUpdated:"사용자가 성공적으로 업데이트되었습니다",userDeleted:"사용자가 성공적으로 삭제되었습니다",groupCreated:"그룹이 성공적으로 생성되었습니다",groupUpdated:"그룹이 성공적으로 업데이트되었습니다",groupDeleted:"그룹이 성공적으로 삭제되었습니다",fillRequiredFields:"모든 필수 항목을 입력하세요",passwordsDoNotMatch:"비밀번호가 일치하지 않습니다",passwordTooShort:"비밀번호는 최소 6자여야 합니다",enterGroupName:"그룹 이름을 입력하세요",settingsSaved:"설정이 저장되었습니다",noPermissionUpdate:"설정을 변경할 권한이 없습니다",cameraSettingsSaved:"카메라 설정이 저장되었습니다",enterCameraUrl:"카메라 URL을 입력하세요",passwordChanged:"비밀번호가 성공적으로 변경되었습니다",connectionFailed:"연결 실패",testFailed:"테스트 실패",cameraConnected:"카메라 연결됨{{resolution}}",passwordNeedsUppercase:"비밀번호에 대문자가 최소 1개 포함되어야 합니다",passwordNeedsLowercase:"비밀번호에 소문자가 최소 1개 포함되어야 합니다",passwordNeedsDigit:"비밀번호에 숫자가 최소 1개 포함되어야 합니다",passwordNeedsSpecial:"비밀번호에 특수문자가 최소 1개 포함되어야 합니다"},testConnection:"연결 테스트",catalog:{spoolCatalog:"스풀 카탈로그",spoolCatalogDescription:"브랜드/유형별 빈 스풀 무게. 스풀 추가 시 자동 무게 조회에 사용됩니다.",searchCatalog:"카탈로그 검색...",addNewEntry:"새 항목 추가",namePlaceholder:"이름 (예: Bambu Lab - Plastic)",weight:"무게",type:"유형",default:"기본",custom:"사용자 지정",noMatch:"검색에 일치하는 항목 없음",empty:"카탈로그에 항목 없음",deleteEntry:"항목 삭제",deleteConfirm:'"{{name}}"을(를) 삭제하시겠습니까?',resetCatalog:"카탈로그 초기화",resetConfirm:"카탈로그를 기본값으로 초기화하시겠습니까? 모든 사용자 지정 항목이 제거됩니다.",loadFailed:"스풀 카탈로그 로드 실패",nameWeightRequired:"이름과 무게가 필요합니다",entryAdded:"항목이 추가되었습니다",addFailed:"항목 추가 실패",entryUpdated:"항목이 업데이트되었습니다",updateFailed:"항목 업데이트 실패",entryDeleted:"항목이 삭제되었습니다",deleteFailed:"항목 삭제 실패",resetSuccess:"카탈로그가 기본값으로 초기화되었습니다",resetFailed:"카탈로그 초기화 실패",exported:"{{count}}개 항목이 내보내졌습니다",imported:"{{added}}개 항목 가져옴 ({{skipped}}개 건너뜀)",importFailed:"가져오기 실패: 잘못된 JSON 형식",exportTooltip:"JSON으로 카탈로그 내보내기",importTooltip:"JSON에서 카탈로그 가져오기",resetTooltip:"기본값으로 초기화",selectedCount:"{{count}}개 선택됨",deleteSelected:"선택 항목 삭제",bulkDeleteConfirm:"{{count}}개 항목을 삭제하시겠습니까?",bulkDeleted:"{{count}}개 항목이 삭제되었습니다",bulkDeleteFailed:"항목 삭제 실패",material:"재료",spoolWeight:"스풀 무게",color:"색상",updateSpoolWeight:"스풀 무게 업데이트",filamentUpdated:"필라멘트가 업데이트되었습니다",filamentUpdateFailed:"필라멘트 업데이트 실패",filamentUpdateInvalid:"잘못된 필라멘트 데이터",keepExistingSpoolWeight:"기존 스풀에 이전 무게 유지",keepExistingSpoolWeightDesc:"이 필라멘트 유형으로 이미 생성된 스풀은 이전 공 무게를 유지합니다. 새 스풀은 업데이트된 값을 사용합니다.",applyToAllSpools:"모든 스풀에 적용",applyToAllSpoolsDesc:"이 필라멘트 유형의 모든 무게 계산이 즉시 새 공 무게를 사용합니다."},colorCatalog:{title:"색상 카탈로그",description:"제조사/재료별 필라멘트 색상. 스풀 추가 시 자동 색상 조회에 사용됩니다.",searchColors:"색상 검색...",allManufacturers:"모든 제조사",addNewColor:"새 색상 추가",manufacturer:"제조사",colorName:"색상 이름",hex:"헥스",materialOptional:"재료 (선택사항)",showing:"{{total}}개 중 {{filtered}}개 색상 표시",noMatch:"검색에 일치하는 색상 없음",empty:"카탈로그에 색상 없음",deleteColor:"색상 삭제",deleteConfirm:'"{{name}}"을(를) 삭제하시겠습니까?',resetCatalog:"색상 카탈로그 초기화",resetConfirm:"카탈로그를 기본값으로 초기화하시겠습니까? 모든 사용자 지정 색상이 제거됩니다.",sync:"동기화",starting:"시작 중...",syncTooltip:"FilamentColors.xyz에서 동기화 (2000개 이상 색상, 약 1분 소요)",loadFailed:"색상 카탈로그 로드 실패",fieldsRequired:"제조사, 색상 이름, 헥스 색상이 필요합니다",colorAdded:"색상이 추가되었습니다",addFailed:"색상 추가 실패",colorUpdated:"색상이 업데이트되었습니다",updateFailed:"색상 업데이트 실패",colorDeleted:"색상이 삭제되었습니다",deleteFailed:"색상 삭제 실패",resetSuccess:"색상 카탈로그가 기본값으로 초기화되었습니다",resetFailed:"카탈로그 초기화 실패",syncUpToDate:"이미 최신 상태 ({{count}}개 색상 확인됨)",syncComplete:"{{added}}개 새 색상 추가됨 ({{skipped}}개 이미 존재)",syncError:"동기화 오류",syncFailed:"FilamentColors.xyz에서 동기화 실패",exported:"{{count}}개 색상이 내보내졌습니다",imported:"{{added}}개 색상 가져옴 ({{skipped}}개 건너뜀)",importFailed:"가져오기 실패: 잘못된 JSON 형식",selectedCount:"{{count}}개 선택됨",deleteSelected:"선택 항목 삭제",bulkDeleteConfirm:"{{count}}개 색상을 삭제하시겠습니까?",bulkDeleted:"{{count}}개 색상이 삭제되었습니다",bulkDeleteFailed:"색상 삭제 실패"},dateFormat:"날짜 형식",dateFormatUs:"미국 (MM/DD/YYYY)",dateFormatEu:"유럽 (DD/MM/YYYY)",dateFormatIso:"ISO (YYYY-MM-DD)",timeFormat:"시간 형식",timeFormat12:"12시간 (오후 3:30)",timeFormat24:"24시간 (15:30)",defaultPrinter:"기본 프린터",defaultPrinterDescription:"업로드, 재인쇄 등 작업에서 이 프린터를 미리 선택합니다.",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"사이드바의 항목을 드래그하여 순서를 변경하세요. 여기서 기본 순서로 초기화하세요.",setDefault:"기본값 설정",sidebarOrderSetDefaultHint:"기본값 설정은 현재 메뉴 순서를 사용자 지정하지 않은 사용자에게 적용합니다.",sidebarDefaultSet:"기본 메뉴 순서가 설정되었습니다.",sidebarDefaultCleared:"기본 메뉴 순서가 지워졌습니다.",sidebarDefaultFailed:"기본 메뉴 순서 설정 실패.",reset:"초기화",darkMode:"다크 모드",lightMode:"라이트 모드",active:"(활성)",background:"배경",accent:"강조",style:"스타일",bgNeutral:"중립",bgWarm:"따뜻함",bgCool:"시원함",bgOled:"OLED 블랙",bgSlate:"슬레이트 블루",bgForest:"포레스트 그린",accentGreen:"그린",accentTeal:"틸",accentBlue:"블루",accentOrange:"오렌지",accentPurple:"퍼플",accentRed:"레드",styleClassic:"클래식",styleGlow:"글로우",styleVibrant:"비브런트",themeToggleHint:"사이드바의 태양/달 아이콘으로 다크 모드와 라이트 모드를 전환하세요.",autoArchivePrints:"인쇄 자동 아카이브",autoArchiveDescription:"인쇄 완료 시 3MF 파일 자동 저장",saveThumbnailsDescription:"3MF 파일에서 미리보기 이미지 추출 및 저장",captureFinishPhotoDescription:"인쇄 완료 시 프린터 카메라로 사진 촬영. Bambuddy는 인쇄 중 짧은 타임랩스를 기록하여 베드가 내려가기 전 순간에서 사진을 가져올 수 있도록 합니다. 이 인쇄에 대해 타임랩스를 활성화한 경우 타임랩스 파일이 보관되며, 그렇지 않으면 사진 촬영 후 자동으로 삭제됩니다.",ffmpegNotInstalled:"ffmpeg 미설치",ffmpegRequired:"카메라 캡처에 ffmpeg가 필요합니다. macOS에서는 <brew>brew install ffmpeg</brew>, Linux에서는 <apt>apt install ffmpeg</apt>로 설치하세요.",camera:"카메라",cameraViewMode:"카메라 보기 모드",cameraOverlayDescription:"카메라가 메인 화면의 크기 조절 가능한 오버레이에서 열립니다",cameraWindowDescription:"카메라가 별도의 브라우저 창에서 열립니다",externalCamerasDescription:"내장 프린터 카메라를 교체할 외부 카메라를 설정하세요. MJPEG 스트림, RTSP, HTTP 스냅샷, USB 카메라(V4L2)를 지원합니다.",cameraPlaceholderUsb:"장치 경로 (/dev/video0)",cameraPlaceholderUrl:"카메라 URL (rtsp://... 또는 http://...)",cameraTypeMjpeg:"MJPEG 스트림",cameraTypeRtsp:"RTSP 스트림",cameraTypeSnapshot:"HTTP 스냅샷",cameraTypeUsb:"USB 카메라 (V4L2)",cameraSnapshotUrl:"스냅샷 URL (선택사항)",cameraSnapshotUrlPlaceholder:"http://192.168.1.61:1984/api/frame.jpeg?src=printer",cameraSnapshotUrlHelp:"알림 썸네일, 완료 사진, 타임랩스, 플레이트 감지에 사용되는 단일 프레임 URL.",cameraRotation:"회전",test:"테스트",connected:"연결됨",disconnected:"연결 끊김",currency:"통화",defaultFilamentCost:"기본 필라멘트 비용 (kg당)",electricityCost:"kWh당 전기 비용",energyDisplayMode:"에너지 표시 모드",energyModePrintDescription:"대시보드가 인쇄 중 사용된 에너지 합계를 표시",energyModeTotalDescription:"대시보드가 스마트 플러그의 전체 에너지를 표시",fileManager:"파일 관리자",createArchiveEntry:"인쇄 시 아카이브 항목 생성",createArchiveEntryDescription:"파일 관리자에서 인쇄할 때 선택적으로 아카이브 항목 생성",lowDiskSpaceWarning:"디스크 공간 부족 경고",lowDiskSpaceDescription:"여유 디스크 공간이 이 임계값 아래로 떨어지면 경고 표시",printerFirmware:"프린터 펌웨어",checkFirmwareDescription:"Bambu Lab의 프린터 펌웨어 업데이트 확인",bambuddySoftware:"Bambuddy 소프트웨어",autoCheckDescription:"시작 시 자동으로 새 버전 확인",checkNow:"지금 확인",updateAvailableVersion:"업데이트 가능: v{{version}}",releaseNotes:"릴리스 노트",updateViaDocker:"Docker Compose로 업데이트:",updateViaHomeAssistant:"업데이트는 Home Assistant 수퍼바이저에서 관리됩니다. Home Assistant에서 설정 → 애드온 → Bambuddy를 열어 새 버전을 설치하세요.",installUpdate:"업데이트 설치",latestVersionRunning:"최신 버전을 실행 중입니다",failedToCheckUpdates:"업데이트 확인 실패: {{error}}",backupRestore:"백업 및 복원",backupRestoreDescription:"설정 내보내기/가져오기 및 GitHub 백업 설정",goToBackup:"백업으로 이동",externalUrl:"외부 URL",externalUrlDescription:"Bambuddy에 접근할 수 있는 외부 URL. 알림 이미지 및 외부 통합에 사용됩니다.",bambuddyUrl:"Bambuddy URL",externalUrlHint:"프로토콜과 포트를 포함하세요 (예: http://192.168.1.100:8000)",ftpRetry:"FTP 재시도",ftpRetryDescription:"프린터 WiFi가 불안정할 때 FTP 작업을 재시도합니다.",autoRetryDescription:"실패한 FTP 작업 자동 재시도",retryAttempts:"재시도 횟수",retryDelay:"재시도 지연",connectionTimeout:"연결 제한 시간",time_one:"{{count}}번",time_other:"{{count}}번",second_one:"{{count}}초",second_other:"{{count}}초",nSeconds:"{{count}}초",increaseForWeakWifi:"WiFi가 약한 프린터에서 늘리세요",homeAssistant:"Home Assistant",homeAssistantFullDescription:"Home Assistant의 REST API를 통해 스마트 플러그를 제어하려면 연결하세요.",homeAssistantUrl:"Home Assistant URL",longLivedAccessToken:"장기 액세스 토큰",haTokenHint:"HA에서 토큰 생성: 프로필 → 장기 액세스 토큰 → 토큰 생성",connectionSuccessful:"연결 성공",connectionFailed:"연결 실패",haConnectionSuccess:"Home Assistant에 성공적으로 연결되었습니다.",haConnectionFailed:"Home Assistant 연결 실패.",mqttPublishing:"MQTT 게시",mqttDescription:"Node-RED, Home Assistant 등 자동화 시스템과 통합하기 위해 Bambuddy 이벤트를 외부 MQTT 브로커에 게시하세요.",mqttEnableDescription:"외부 MQTT 브로커에 이벤트 게시",brokerHostname:"브로커 호스트명",port:"포트",usernameOptional:"사용자명 (선택사항)",passwordOptional:"비밀번호 (선택사항)",topicPrefix:"토픽 접두사",topicPrefixHint:"토픽은 다음과 같습니다: {{prefix}}/printers/<serial>/status 등",prometheusMetrics:"Prometheus 메트릭",prometheusEndpointDescription:"Prometheus/Grafana 모니터링을 위해 <code>/api/v1/metrics</code>에서 프린터 메트릭을 노출합니다.",bearerTokenOptional:"베어러 토큰 (선택사항)",bearerTokenHint:"설정하면 요청에 <code>Authorization: Bearer <token></code>을 포함해야 합니다",metricsConnectionStatus:"연결 상태",metricsPrinterState:"프린터 상태 (유휴/인쇄 중/등)",metricsPrintProgress:"인쇄 진행 0-100%",metricsBedTemp:"베드 온도",metricsNozzleTemp:"노즐 온도",metricsPrintsTotal:"결과별 총 인쇄 수",metricsMore:"...및 더 많은 것 (레이어, 팬, 대기열, 필라멘트 사용량)",smartPlugsDescription:"에너지 사용량 추적 및 프린터 전원 제어를 자동화하기 위해 스마트 플러그(Tasmota 또는 Home Assistant)를 연결하세요.",allOn:"모두 켜기",allOff:"모두 끄기",addSmartPlug:"스마트 플러그 추가",energySummary:"에너지 요약",currentPower:"현재 전력",plugsOnline:"{{reachable}}/{{total}}개 플러그 온라인",today:"오늘",yesterday:"어제",total:"총계",enablePlugsForSummary:"에너지 요약을 보려면 플러그를 활성화하세요",addNotificationProvider:"추가",systemBadge:"(시스템)",creating:"생성 중...",changing:"변경 중...",deleteUserAndItems:"사용자 및 항목 삭제",deleteUserKeepItems:"사용자 삭제, 항목 유지 (소유자 없음)",ok:"확인",twoFa:{totpTitle:"인증 앱 (TOTP)",totpDesc:"Google Authenticator, Aegis, Authy 같은 인증 앱을 사용하세요.",emailOtpTitle:"이메일 OTP",emailOtpDesc:"로그인 시 {{email}}로 일회용 코드를 전송합니다.",emailOtpNoEmail:"이 방법을 활성화하려면 계정에 이메일 주소를 추가하세요.",addEmailFirst:"계정에 이메일 주소가 없습니다. 이메일 OTP를 활성화하기 전에 관리자에게 추가를 요청하세요.",setupTotp:"인증 앱 설정",setupAuthApp:"인증 앱 설정",setupInstructions:"아래 QR 코드를 인증 앱으로 스캔한 후 코드로 확인하세요.",manualEntry:"스캔할 수 없나요? 이 비밀을 수동으로 입력하세요:",scannedContinue:"코드를 스캔했습니다 — 계속",enterCodeToConfirm:"인증 앱의 6자리 코드를 입력하여 설정을 확인하세요.",activate:"활성화",disableTotp:"인증기 비활성화",disableConfirmHint:"인증기를 비활성화하려면 유효한 TOTP 코드나 백업 코드를 입력하세요.",totpDisabled:"인증 앱이 비활성화되었습니다.",emailOtpEnabled:"이메일 OTP가 활성화되었습니다.",emailOtpDisabled:"이메일 OTP가 비활성화되었습니다.",smtpRequired:"먼저 SMTP 설정을 구성하고 테스트하세요.",invalidCode:"잘못된 코드입니다. 다시 시도하세요.",enableEmailOtp:"이메일 OTP 활성화",disableEmailOtp:"이메일 OTP 비활성화",emailSetupEnterCode:"이메일 주소로 인증 코드가 전송되었습니다. 아래에 입력하여 이 받은 편지함을 소유하고 있음을 확인하세요.",verifyAndEnable:"확인 및 활성화",emailDisablePasswordHint:"이메일 OTP 비활성화를 확인하려면 계정 비밀번호를 입력하세요.",passwordPlaceholder:"비밀번호 입력",backupCodesTitle:"백업 코드 저장",backupCodesWarning:"이 코드를 안전한 곳에 저장하세요. 각 코드는 한 번만 사용할 수 있으며 다시 표시되지 않습니다.",backupCodesRemaining:"{{count}}개 백업 코드 남음",savedCodes:"코드를 저장했습니다",regenBackup:"백업 코드 재생성",regenBackupHint:"현재 TOTP 코드를 입력하여 10개의 새 백업 코드를 생성하세요. 기존 백업 코드는 모두 무효화됩니다.",newBackupCodes:"새 백업 코드",linkedAccounts:"연결된 SSO 계정",linkedAccountsDesc:"이 외부 ID 제공자가 계정에 연결되어 있습니다.",oidcUnlinked:"계정 연결이 해제되었습니다."},oidc:{title:"SSO / OIDC 제공자",desc:"외부 ID 제공자를 통해 싱글 사인온을 허용하도록 OpenID Connect 제공자를 설정하세요.",addProvider:"제공자 추가",newProvider:"새 제공자",empty:"아직 설정된 OIDC 제공자가 없습니다.",created:"제공자가 생성되었습니다.",updated:"제공자가 업데이트되었습니다.",deleted:"제공자가 삭제되었습니다.",deleteTitle:"제공자 삭제",deleteMessage:'"{{name}}"을(를) 삭제하시겠습니까? 연결된 모든 사용자 계정의 연결이 해제됩니다.',form:{name:"표시 이름",issuerUrl:"발급자 URL",clientId:"클라이언트 ID",clientSecret:"클라이언트 시크릿",scopes:"범위",iconUrl:"아이콘 URL (선택사항)",enabled:"활성화됨",autoCreate:"사용자 자동 생성",autoCreateDesc:"첫 번째 로그인 시 자동으로 로컬 계정 생성.",autoLink:"기존 계정 자동 연결",autoLinkDesc:"첫 번째 로그인 시 이메일 일치로 기존 로컬 계정 연결.",secretHint:"현재 값을 유지하려면 비워두세요",secretPlaceholder:"새 시크릿",emailClaim:"이메일 클레임",emailClaimDesc:"이메일 ID로 사용되는 JWT 클레임.",emailClaimPlaceholder:"email",emailClaimCustomClaimAutoLinkWarning:"사용자 지정 클레임은 값이 테넌트 관리인 경우에만 자동 연결에 안전합니다. IdP가 사용자가 이 클레임을 직접 주장할 수 있게 하면 자동 연결을 활성화하지 마세요.",requireEmailVerified:"이메일 확인 필요",requireEmailVerifiedDesc:"제공자가 확인된 것으로 표시한 경우에만 이메일 클레임을 수락합니다.",requireEmailVerifiedWarning:"경고: 확인 없이도 이메일이 수락됩니다. 신뢰할 수 있는 제공자에만 사용하세요.",requireEmailVerifiedAutoLink:"이 설정을 변경하려면 먼저 자동 연결을 비활성화하세요.",defaultGroup:"기본 그룹",defaultGroupDesc:"자동 생성된 사용자에게 할당되는 그룹. 설정되지 않으면 Viewers로 대체됩니다.",defaultGroupViewersFallback:"Viewers (기본값)"},refreshIcon:"아이콘 새로고침",removeIcon:"아이콘 제거",iconRefreshed:"아이콘이 새로고침되었습니다.",iconRemoved:"아이콘이 제거되었습니다.",iconFetchFailed:"공급자 URL에서 아이콘을 가져올 수 없습니다."},encryption:{title:"MFA 암호화 상태",enabledFromEnv:"저장 시 암호화 활성화됨 (MFA_ENCRYPTION_KEY 환경 변수에서 키)",enabledFromFile:"저장 시 암호화 활성화됨 (데이터 디렉토리에서 키 로드됨)",enabledGenerated:"자동 생성된 키로 저장 시 암호화 활성화됨",notConfigured:"저장 시 암호화가 설정되지 않음",notConfiguredDesc:"TOTP 시크릿 및 OIDC client_secret이 일반 텍스트로 저장됩니다. MFA_ENCRYPTION_KEY를 설정하거나 쓰기 가능한 데이터 디렉토리로 Bambuddy를 재시작하여 자동 생성하세요.",allEncrypted:"모든 MFA 시크릿이 저장 시 암호화되어 있습니다.",legacyRowsLabel:"레거시 일반 텍스트 행",encryptedRowsLabel:"암호화된 행",legacyRowsWarning:"{{count}}개 레거시 일반 텍스트 행이 감지되었습니다. 암호화된 저장소로 마이그레이션하려면 OIDC 제공자를 다시 저장하거나 사용자의 인증 앱을 재등록하세요.",backupHint:"자동 생성된 키는 DATA_DIR/.mfa_encryption_key에 저장되며 로컬 백업 ZIP에 포함됩니다. 백업을 안전하게 보관하거나 MFA_ENCRYPTION_KEY를 명시적으로 설정하세요.",decryptionBrokenTitle:"암호화 키 누락",decryptionBrokenError:"암호화 키를 더 이상 사용할 수 없어 {{count}}개의 암호화된 레코드를 복호화할 수 없습니다.",migrationErrorWarning:"시작 시 {{count}}개 레거시 행을 재암호화하지 못했습니다. 서버 로그를 확인하고 Bambuddy를 재시작하여 재시도하세요."},updateEnergyCost:"전기 요금 업데이트",updateEnergyCostDescription:"이 키가 /settings/electricity-price에 새 kWh당 전기 요금을 POST할 수 있도록 허용합니다. Home Assistant 동적 요금 자동화(Tibber, Octopus 등)에 유용합니다. API 키로 쓸 수 있는 유일한 설정 필드입니다.",energyCostBadge:"에너지",passwordRequirements:"최소 8자, 대문자, 소문자, 숫자, 특수문자 각 1개 이상 포함"},notification:{printStarted:{title:"인쇄 시작됨",body:"{{printer}}: {{filename}} 인쇄가 시작되었습니다"},printCompleted:{title:"인쇄 완료됨",body:"{{printer}}: {{filename}}이(가) 성공적으로 완료되었습니다"},printFailed:{title:"인쇄 실패",body:"{{printer}}: {{filename}}이(가) 실패했습니다"},printStopped:{title:"인쇄 정지됨",body:"{{printer}}: {{filename}}이(가) 정지되었습니다"},printProgress:{title:"인쇄 진행",body:"{{printer}}: {{filename}} {{percent}}% 완료"},printerOffline:{title:"프린터 오프라인",body:"{{printer}}이(가) 오프라인 상태입니다"},printerError:{title:"프린터 오류",body:"{{printer}}: {{error}}"},filamentLow:{title:"필라멘트 부족",body:"{{printer}}: 필라멘트가 부족합니다"},maintenanceDue:{title:"유지보수 예정",body:"{{printer}}: {{items}} 주의 필요"}},errors:{generic:"문제가 발생했습니다",networkError:"네트워크 오류. 연결을 확인하세요.",notFound:"찾을 수 없습니다",unauthorized:"권한 없음",serverError:"서버 오류",validationError:"입력값을 확인하세요",printerConnectionFailed:"프린터 연결 실패",saveFailed:"변경사항 저장 실패",deleteFailed:"삭제 실패",loadFailed:"데이터 로드 실패"},hmsErrors:{title:"오류 - {{name}}",noErrors:"오류 없음",viewOnWiki:"Bambu Lab 위키에서 보기",clearInstructions:"오류를 해제하려면 프린터에서 오류를 지우세요.",clearErrors:"오류 지우기",clearSuccess:"HMS 오류가 지워졌습니다",clearFailed:"HMS 오류 지우기 실패"},mqttDebug:{title:"MQTT 디버그 로그",searchPlaceholder:"토픽 또는 페이로드 검색...",noMessages:"아직 기록된 메시지 없음",startLoggingHint:'"로깅 시작"을 클릭하여 MQTT 메시지 캡처 시작',noMessagesMatch:"필터에 일치하는 메시지 없음",adjustFilterHint:"검색 또는 필터 기준을 조정해 보세요",incoming:"수신",outgoing:"송신",loggingStopped:"로깅 정지됨",loggingActive:"로깅 활성 - 메시지가 자동 새로고침됨",startLogging:"로깅 시작",stopLogging:"로깅 정지",clearLog:"로그 지우기",topic:"토픽",timestamp:"타임스탬프",direction:"방향",all:"전체"},printerFiles:{title:"파일 관리자",storageUsed:"사용됨:",storageFree:"여유:",filterPlaceholder:"파일 필터...",deleteButton:"삭제",deleteFiles:"{{count}}개 파일 삭제",deleteFileConfirm:'"{{name}}"을(를) 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.',deleteFilesConfirm:"선택된 {{count}}개 파일을 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.",noFiles:"프린터에 파일 없음",loadingFiles:"파일 로딩 중...",failedToLoad:"파일 로드 실패",toast:{filesDeleted:"{{count}}개 파일이 삭제되었습니다",deleteFailed:"삭제 실패: {{error}}"}},confirm:{delete:"이것을 삭제하시겠습니까?",unsavedChanges:"저장되지 않은 변경사항이 있습니다. 정말 나가시겠습니까?",clearQueue:"대기열을 지우시겠습니까?"},login:{title:"Bambuddy 로그인",subtitle:"계정에 로그인하세요",username:"사용자명",usernamePlaceholder:"사용자명을 입력하세요",usernameOrEmail:"사용자명 또는 이메일",usernameOrEmailPlaceholder:"사용자명 또는 @ 이메일",password:"비밀번호",passwordPlaceholder:"비밀번호를 입력하세요",signIn:"로그인",signingIn:"로그인 중...",rememberMe:"로그인 유지",forgotPassword:"비밀번호를 잊으셨나요?",loginSuccess:"성공적으로 로그인되었습니다",loginFailed:"로그인 실패",enterCredentials:"사용자명과 비밀번호를 입력하세요",enterEmail:"이메일 주소를 입력하세요",oidcLoginFailed:"OIDC 로그인 실패",oidcErrors:{providerError:"ID 제공자에서 오류가 반환되었습니다",missingParameters:"OIDC 콜백에 필수 매개변수가 없습니다",invalidState:"OIDC 상태가 잘못되었거나 이미 사용되었습니다",stateExpired:"OIDC 로그인 세션이 만료되었습니다 — 다시 시도하세요",providerNotFound:"OIDC 제공자를 찾을 수 없습니다",discoveryFailed:"OIDC 검색 문서를 가져오지 못했습니다",invalidDiscovery:"OIDC 검색 문서가 잘못되었습니다",networkError:"OIDC 토큰 교환 중 네트워크 오류",badResponse:"OIDC 토큰 교환 중 예상치 못한 응답",noIdToken:"OIDC 제공자가 ID 토큰을 반환하지 않았습니다",validationFailed:"OIDC 토큰 검증 실패",nonceMismatch:"OIDC 논스 불일치 — 재생 공격 가능성",missingSubClaim:"OIDC 토큰에 sub 클레임이 없습니다",noLinkedAccount:"OIDC ID에 연결된 로컬 계정이 없습니다",accountInactive:"계정이 비활성 상태입니다",userResolutionFailed:"계정 확인 실패",internalError:"OIDC 로그인 중 내부 오류 발생",tokenExchangeFailed:"OIDC 토큰 교환 실패"},forgotPasswordTitle:"비밀번호 찾기",forgotPasswordMessage:"비밀번호를 잊으셨다면 시스템 관리자에게 초기화를 요청하세요.",forgotPasswordEmailMessage:"이메일 주소를 입력하면 새 비밀번호를 전송해 드립니다.",emailAddress:"이메일 주소",emailPlaceholder:"your.email@example.com",cancel:"취소",sending:"전송 중...",sendResetEmail:"초기화 이메일 전송",howToReset:"비밀번호 초기화 방법:",resetStep1:"Bambuddy 관리자에게 문의하세요",resetStep2:"사용자 관리에서 비밀번호 초기화를 요청하세요",resetStep3:"관리자가 임시 비밀번호를 설정해 드립니다",resetStep4:"새 비밀번호로 로그인하고 설정에서 변경하세요",gotIt:"확인",resetPassword:{title:"새 비밀번호 설정",subtitle:"아래에 새 비밀번호를 입력하고 확인하세요.",newPassword:"새 비밀번호",newPasswordPlaceholder:"최소 8자",confirmPassword:"비밀번호 확인",confirmPasswordPlaceholder:"새 비밀번호 반복",saving:"저장 중…",submit:"새 비밀번호 설정",backToLogin:"로그인으로 돌아가기",passwordsDoNotMatch:"비밀번호가 일치하지 않습니다",passwordTooShort:"비밀번호는 최소 8자여야 합니다",resetFailed:"비밀번호 초기화 실패. 링크가 만료되었을 수 있습니다."},twoFA:{title:"이중 인증",subtitle:"계정이 2FA로 보호되어 있습니다. 아래에 인증 코드를 입력하세요.",methodAuthenticator:"인증 앱",methodEmail:"이메일 코드",methodBackup:"백업 코드",instructionsTotp:"인증 앱을 열고 Bambuddy의 6자리 코드를 입력하세요.",instructionsEmail:"이메일 주소로 6자리 코드가 전송되었습니다. 10분 후 만료됩니다.",instructionsEmailNotSent:"아래 버튼을 클릭하여 이메일로 인증 코드를 받으세요.",instructionsBackup:"8자리 백업 복구 코드 중 하나를 입력하세요. 각 코드는 한 번만 사용할 수 있습니다.",sendCodeButton:"이메일로 코드 전송",sendingCode:"전송 중...",resendCode:"코드 재전송",codeLabel:"인증 코드",backupCodeLabel:"백업 코드",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"확인",verifyingButton:"확인 중...",backToLogin:"← 로그인으로 돌아가기",orContinueWith:"또는 계속",signInWith:"{{provider}}로 로그인",enterCode:"인증 코드를 입력하세요",sendCodeFailed:"인증 코드 전송 실패",invalidCode:"잘못된 코드입니다. 다시 시도하세요."}},setup:{title:"Bambuddy 설정",subtitle:"Bambuddy 인스턴스의 인증을 설정하세요",enableAuth:"인증 활성화",adminAccount:"관리자 계정",adminAccountDesc:"관리자 사용자가 이미 있는 경우 기존 관리자 계정으로 인증이 활성화됩니다. 기존 관리자를 사용하려면 아래 필드를 비워두거나, 새 관리자 사용자를 만들려면 자격 증명을 입력하세요.",adminUsername:"관리자 사용자명",adminPassword:"관리자 비밀번호",optionalIfAdminExists:"(관리자 사용자가 있는 경우 선택사항)",adminUsernamePlaceholder:"관리자 사용자명 입력 (선택사항)",adminPasswordPlaceholder:"관리자 비밀번호 입력 (선택사항)",confirmPassword:"비밀번호 확인",confirmPasswordPlaceholder:"관리자 비밀번호 확인",settingUp:"설정 중...",completeSetup:"설정 완료",toast:{authEnabledAdminCreated:"인증 활성화 및 관리자 사용자 생성됨",authEnabledExistingAdmins:"기존 관리자 사용자로 인증 활성화됨",setupCompleted:"설정이 완료되었습니다",enterBothCredentials:"관리자 사용자명과 비밀번호를 모두 입력하거나, 기존 관리자 사용자를 사용하려면 둘 다 비워두세요",passwordsDoNotMatch:"비밀번호가 일치하지 않습니다",passwordTooShort:"비밀번호는 최소 6자여야 합니다"}},changePassword:{title:"비밀번호 변경",currentPassword:"현재 비밀번호",currentPasswordPlaceholder:"현재 비밀번호 입력",newPassword:"새 비밀번호",newPasswordPlaceholder:"새 비밀번호 입력 (최소 6자)",confirmPassword:"새 비밀번호 확인",confirmPasswordPlaceholder:"새 비밀번호 확인",passwordsDoNotMatch:"비밀번호가 일치하지 않습니다",passwordTooShort:"비밀번호는 최소 6자여야 합니다",changing:"변경 중...",success:"비밀번호가 성공적으로 변경되었습니다",failed:"비밀번호 변경 실패"},plateAlert:{title:"인쇄 일시정지됨!",message:"빌드 플레이트에 객체가 감지되었습니다. 인쇄가 자동으로 일시정지되었습니다. 플레이트를 비우고 인쇄를 재개하세요.",understand:"확인했습니다"},camera:{title:"카메라 보기",invalidPrinterId:"유효하지 않은 프린터 ID",live:"실시간",snapshot:"스냅샷",restartStream:"스트림 재시작",refreshSnapshot:"스냅샷 새로고침",fullscreen:"전체 화면",exitFullscreen:"전체 화면 종료",connectingToCamera:"카메라에 연결 중...",capturingSnapshot:"스냅샷 캡처 중...",connectionLost:"연결 끊김",connectionFailed:"카메라 연결 실패",reconnecting:"{{countdown}}초 후 재연결 중... (시도 {{attempt}}/{{max}})",reconnectNow:"지금 재연결",cameraUnavailable:"카메라를 사용할 수 없음",cameraUnavailableDesc:"프린터가 켜져 있고 연결되어 있는지 확인하세요.",noCamera:"사용 가능한 카메라 없음",retry:"다시 시도",cameraStream:"카메라 스트림",zoomOut:"축소",zoomIn:"확대",resetZoom:"배율 초기화",recording:"녹화 중",startRecording:"녹화 시작",stopRecording:"녹화 중지",chamberLight:"챔버 조명 전환",unavailable:"카메라 사용 불가",diagnose:{button:"진단",modalTitle:"카메라 진단",running:"진단 실행 중...",runFailed:"진단 실행 실패: {{error}}",retry:"다시 실행",stage:{tcp_reachable:"네트워크 연결 가능 여부",first_frame:"프레임 캡처",live_stream_active:"라이브 스트림 활성"},summary:{all_ok:"카메라가 정상 작동 중입니다. 모든 단계를 성공적으로 완료했습니다.",live_stream_active_healthy:"카메라가 최근 프레임으로 스트리밍 중입니다 — 테스트가 필요 없습니다.",printer_unreachable:"프린터에 연결할 수 없습니다. IP 주소, 네트워크 연결, 프린터 전원을 확인하세요.",camera_port_closed:"프린터에 연결됐지만 카메라 포트가 닫혀 있습니다. 프린터 설정에서 LAN 전용 모드와 개발자 모드가 활성화되어 있는지 확인하세요.",no_frame:"카메라에 연결됐지만 프레임이 수신되지 않았습니다. 다시 시도하거나 프린터 설정에서 카메라가 활성화되어 있는지 확인하세요.",unknown_failure:"알 수 없는 이유로 카메라 진단에 실패했습니다. 지원 로그를 확인하세요."},meta:{protocol:"프로토콜",port:"포트",profile:"프로파일"}}},groups:{title:"그룹 관리",subtitle:"접근 제어를 위한 권한 그룹 관리",backToSettings:"설정으로 돌아가기",createGroup:"그룹 생성",noPermission:"이 페이지에 접근할 권한이 없습니다.",system:"시스템",noDescription:"설명 없음",usersCount:"{{count}}명의 사용자",permissionsCount:"{{count}}개의 권한",edit:"편집",delete:"삭제",toast:{created:"그룹이 성공적으로 생성되었습니다",updated:"그룹이 성공적으로 업데이트되었습니다",deleted:"그룹이 성공적으로 삭제되었습니다",enterGroupName:"그룹 이름을 입력해 주세요"},modal:{editGroup:"그룹 편집",createGroup:"그룹 생성",cancel:"취소",saving:"저장 중...",creating:"생성 중...",saveChanges:"변경 사항 저장"},form:{groupName:"그룹 이름",groupNamePlaceholder:"그룹 이름 입력",systemGroupWarning:"시스템 그룹 이름은 변경할 수 없습니다",description:"설명",descriptionPlaceholder:"설명 입력 (선택사항)",permissions:"권한 ({{count}}개 선택됨)"},deleteModal:{title:"그룹 삭제",message:"이 그룹을 삭제하시겠습니까? 이 그룹의 사용자는 해당 권한을 잃게 됩니다.",confirm:"그룹 삭제"},editor:{title:"그룹 편집",createTitle:"그룹 생성",search:"권한 검색...",selectAll:"모두 선택",clearAll:"모두 해제",permissionsSelected:"{{count}}개 선택됨",noResults:"검색과 일치하는 권한이 없습니다"}},users:{title:"사용자 관리",subtitle:"Bambuddy 인스턴스에 대한 사용자 및 접근 권한 관리",backToSettings:"설정으로 돌아가기",createUser:"사용자 생성",noPermission:"이 페이지에 접근할 권한이 없습니다.",admin:"관리자",noGroups:"그룹 없음",active:"활성",inactive:"비활성",edit:"편집",delete:"삭제",system:"시스템",noGroupsAvailable:"사용 가능한 그룹 없음",table:{username:"사용자 이름",groups:"그룹",status:"상태",actions:"작업"},toast:{created:"사용자가 성공적으로 생성되었습니다",updated:"사용자가 성공적으로 업데이트되었습니다",deleted:"사용자가 성공적으로 삭제되었습니다",fillRequired:"모든 필수 항목을 입력해 주세요",passwordsDoNotMatch:"비밀번호가 일치하지 않습니다",passwordTooShort:"비밀번호는 최소 6자 이상이어야 합니다",ldapProvisioned:'LDAP 사용자 "{{username}}"이(가) 생성되었습니다'},modal:{createUser:"사용자 생성",editUser:"사용자 편집",cancel:"취소",creating:"생성 중...",saving:"저장 중...",saveChanges:"변경 사항 저장",advancedAuthSubtitle:"고급 인증 사용",tabsAriaLabel:"사용자 소스",localTab:"로컬",ldapTab:"LDAP",ldapSearchLabel:"디렉터리 검색",ldapSearchPlaceholder:"사용자명, 이름, 이메일을 입력하세요...",ldapMinChars:"검색하려면 최소 2자 이상 입력하세요",ldapTypeToSearch:"LDAP 디렉터리를 검색하려면 입력을 시작하세요",ldapSearching:"디렉터리 검색 중...",ldapNoResults:"디렉터리에서 일치하는 사용자가 없습니다",ldapSearchError:"디렉터리 검색에 실패했습니다. LDAP 서버 상태를 확인하세요.",ldapAlreadyProvisioned:"이미 생성됨",ldapSelectedLabel:"선택됨",ldapProvision:"사용자 생성",ldapProvisioning:"생성 중...",ldapErrorProvision:"생성에 실패했습니다. LDAP 서버 상태를 확인하고 다시 시도하세요."},form:{username:"사용자 이름",usernamePlaceholder:"사용자 이름 입력",email:"이메일",emailPlaceholder:"user@example.com",password:"비밀번호",passwordPlaceholder:"비밀번호 입력",confirmPassword:"비밀번호 확인",confirmPasswordPlaceholder:"비밀번호 확인",newPasswordPlaceholder:"새 비밀번호 입력",confirmNewPasswordPlaceholder:"새 비밀번호 확인",leaveBlankToKeep:"현재 비밀번호 유지 시 비워두기",groups:"그룹",optional:"선택사항",autoGeneratedPassword:"안전한 비밀번호가 자동으로 생성되어 사용자에게 이메일로 전송됩니다.",passwordManagedByAdvancedAuth:'비밀번호는 고급 인증에 의해 관리됩니다. "비밀번호 재설정"을 사용하여 이메일로 새 비밀번호를 전송하세요.',resetPassword:"비밀번호 재설정",resettingPassword:"비밀번호 재설정 중..."},deleteModal:{title:"사용자 삭제",message:"이 사용자를 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.",confirm:"사용자 삭제"}},streamOverlay:{title:"스트림 오버레이",invalidPrinterId:"유효하지 않은 프린터 ID",cameraStream:"카메라 스트림",progress:"진행률",eta:"예상 완료",printerIdle:"프린터 대기 중",printerOffline:"프린터 오프라인",status:{printing:"인쇄 중",paused:"일시 중지됨",finished:"완료됨",failed:"실패",idle:"대기 중",unknown:"알 수 없음"}},profiles:{title:"프로필",subtitle:"슬라이서 프리셋 및 압력 전진 보정 관리",tabs:{bambuCloud:"Bambu Cloud",orcaCloud:"Orca Cloud",local:"로컬 프로필",kprofiles:"K-프로필"},orcaCloud:{connectedAs:"연결됨",logout:"연결 해제",noLogoutPermission:"연결을 해제할 권한이 없습니다",noConnectPermission:"Orca Cloud에 연결할 권한이 없습니다",retry:"다시 시도",back:"다른 로그인 방법 사용",connect:{title:"Orca Cloud에 연결",description:"Orca Cloud 계정에 로그인하여 슬라이서 프로필을 Bambuddy에 동기화하세요."},providers:{google:"Google로 로그인",apple:"Apple로 로그인",github:"GitHub로 로그인",email:"이메일과 비밀번호로 로그인"},password:{title:"이메일과 비밀번호로 로그인",email:"이메일",emailPlaceholder:"you@example.com",password:"비밀번호",submit:"로그인"},paste:{title:"로그인 완료",step1:"새 탭에서 Orca Cloud 로그인 페이지가 열렸습니다. Orca 계정으로 로그인하세요.",step2:'브라우저가 로드되지 않는 "localhost" URL로 리디렉션됩니다. 이것은 정상입니다 — 우리에게 필요한 것은 그 URL입니다.',step3:"브라우저의 주소 표시줄에서 전체 URL을 복사하여 아래에 붙여넣으세요.",signInUrl:"로그인 탭이 열리지 않은 경우 이 URL을 클릭하세요:",label:"여기에 콜백 URL 붙여넣기",placeholder:"http://localhost:41172/callback?code=...&state=...",submit:"연결 완료"},profiles:{title:"Orca Cloud 프로필 ({{count}})",refresh:"새로고침",empty:"Orca Cloud 계정에 아직 프로필이 없습니다."},toast:{connected:"{{email}}로 Orca Cloud에 연결됨",disconnected:"Orca Cloud 연결 해제됨"},errors:{startFailed:"Orca Cloud 로그인 흐름을 시작할 수 없습니다.",finishFailed:"Orca Cloud 로그인을 완료할 수 없습니다.",passwordFailed:"해당 이메일과 비밀번호로 로그인할 수 없습니다.",passwordEmpty:"이메일과 비밀번호를 모두 입력하세요.",emptyPaste:"브라우저에서 콜백 URL을 붙여넣으세요.",noCode:"해당 URL은 Orca Cloud 콜백이 아닌 것 같습니다 (code 매개변수 없음). 주소 표시줄에서 전체 URL을 복사하세요."}},localProfiles:{title:"로컬 프로필",subtitle:"OrcaSlicer에서 슬라이서 프리셋 가져오기 및 관리",import:"프로필 가져오기",importDesc:".bbscfg, .bbsflmt, .orca_filament, .zip 또는 .json 파일을 여기에 드롭하세요",importing:"가져오는 중...",search:"로컬 프리셋 검색...",noPresets:"로컬 프리셋 없음",badge:"로컬",edit:"편집",delete:"삭제",cancel:"취소",deleteConfirmTitle:"프리셋 삭제",deleteConfirm:"이 프리셋을 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.",source:"출처",inheritsFrom:"상속",filamentType:"유형",vendor:"제조사",compatiblePrinters:"프린터",nozzleTemp:"노즐 온도",cost:"비용",density:"밀도",pressureAdvance:"압력 전진",filament:"필라멘트",process:"프로세스",printer:"프린터",toast:{importSuccess:"{{count}}개 프리셋 가져옴",importSkipped:"{{count}}개 프리셋 건너뜀 (중복)",importError:"가져오기 중 {{count}}개 오류 발생",deleted:"프리셋 삭제됨",updated:"프리셋 업데이트됨"},noSearchResults:"검색어와 일치하는 프리셋이 없습니다"},connectedAs:"연결된 계정",logout:"로그아웃",noLogoutPermission:"로그아웃 권한이 없습니다",failedToLoad:"프로필 불러오기 실패",retry:"다시 시도",time:{justNow:"방금",minsAgo:"{{count}}분 전",hoursAgo:"{{count}}시간 전",daysAgo:"{{count}}일 전"},toast:{loggedOut:"로그아웃되었습니다"},login:{title:"Bambu 클라우드 연결",subtitle:"기기 간 슬라이서 프리셋 동기화",email:"이메일",password:"비밀번호",region:"지역",regionGlobal:"글로벌",regionChina:"중국",verificationCode:"인증 코드",totpCode:"인증앱 코드",checkEmail:"이메일({{email}})로 전송된 6자리 코드를 확인하세요",enterTotpHint:"인증앱에서 6자리 코드를 입력하세요",accessToken:"액세스 토큰",accessTokenHint:"Bambu Studio에서 Bambu Lab 액세스 토큰을 붙여넣으세요",back:"뒤로",loginButton:"로그인",verifyButton:"인증",setTokenButton:"토큰 설정",useToken:"액세스 토큰 대신 사용",useEmail:"이메일로 로그인",toast:{loggedIn:"성공적으로 로그인되었습니다",codeSent:"이메일로 인증 코드가 전송되었습니다",enterTotp:"인증앱에서 코드를 입력하세요",tokenSet:"토큰이 성공적으로 설정되었습니다"}},presets:{myPreset:"내 프리셋 (편집 가능)",duplicate:"복제",editable:"편집 가능",failedToLoadDetails:"프리셋 세부 정보 불러오기 실패",deleteConfirm:"이 프리셋을 삭제하시겠습니까?",deleteWarning:'Bambu 클라우드에서 "{{name}}"을(를) 영구적으로 삭제합니다. 이 작업은 취소할 수 없습니다.',noDuplicatePermission:"프리셋 복제 권한이 없습니다",noEditPermission:"프리셋 편집 권한이 없습니다",noDeletePermission:"프리셋 삭제 권한이 없습니다",types:{filament:"필라멘트 프리셋",printer:"프린터 프리셋",process:"프로세스 프리셋"},toast:{deleted:"프리셋 삭제됨",created:"프리셋 생성됨",updated:"프리셋 업데이트됨",duplicated:"프리셋 복제됨",fieldAdded:'"{{key}}" 필드 추가됨',exported:"프리셋 내보냄"},baseLabel:"기본: {{name}}",currentLabel:"현재: {{name}}",newPreset:"새 프리셋",editPreset:"프리셋 편집",duplicatePreset:"프리셋 복제",createNewPreset:"새 프리셋 생성",customizeSettings:"새 프리셋의 설정 사용자 지정",compareWithBase:"기본 프리셋과 비교",compare:"비교",basePreset:"기본 프리셋",selectBasePreset:"기본 프리셋 선택...",presetName:"프리셋 이름",myCustomPreset:"내 사용자 지정 프리셋",inheritsFrom:"상속 출처",dropJsonToImport:"JSON 파일을 드롭하여 가져오기",tabs:{common:"공통",allFields:"모든 필드"},availableFields:"사용 가능한 필드",searchFieldsPlaceholder:"필드 검색...",noMatchingFields:"일치하는 필드 없음",allFieldsAdded:"모든 필드 추가됨",addCustomField:"사용자 지정 필드 추가",yourOverrides:"내 재정의",noOverridesYet:"아직 재정의 없음",clickFieldsToAdd:"왼쪽 필드를 클릭하여 추가",saveAsTemplate:"템플릿으로 저장",jsonTip:"팁: 이 모달 어디서나 .json 파일을 드래그 앤 드롭하여 설정을 가져올 수 있습니다"},cloudView:{searchPlaceholder:"프리셋 검색...",templates:"템플릿",refresh:"새로고침",newPreset:"새 프리셋",clearFilters:"필터 초기화",compareMode:"비교 모드",selectAnotherPreset:"다른 {{type}} 프리셋 선택",clickTwoPresets:"같은 유형의 프리셋 두 개를 클릭하여 비교",selectFirst:"1. 첫 번째 선택",selectSecond:"2. 두 번째 선택",compareNow:"지금 비교",lastSynced:"마지막 동기화:",showingCount:"{{total}}개 중 {{showing}}개 표시",noPresetsFound:"프리셋을 찾을 수 없음",columns:{filament:"필라멘트",process:"프로세스",printer:"프린터"},noFilamentPresets:"필라멘트 프리셋 없음",noProcessPresets:"프로세스 프리셋 없음",noPrinterPresets:"프린터 프리셋 없음",filters:{type:"유형",owner:"소유자",printer:"프린터",nozzle:"노즐",filament:"필라멘트",layer:"레이어",all:"전체",myPresets:"내 프리셋",builtIn:"기본 제공",process:"프로세스"},noTemplatesPermission:"템플릿 관리 권한이 없습니다",noRefreshPermission:"프로필 새로고침 권한이 없습니다",noCreatePermission:"프리셋 생성 권한이 없습니다"},templates:{title:"빠른 템플릿",noTemplates:"아직 템플릿 없음",createFirst:"프리셋 편집기에서 템플릿을 생성하세요",typeFilter:"유형:",deleteTitle:"템플릿 삭제",deleteWarning:"이 작업은 취소할 수 없습니다",deleteConfirm:'"{{name}}"을(를) 삭제하시겠습니까?',namePlaceholder:"템플릿 이름",descriptionPlaceholder:"설명",settingsJson:"설정 (JSON)",fieldsCount:"{{count}}개 필드",shownInModals:"모달에 표시됨",hiddenInModals:"모달에서 숨겨짐",apply:"적용",toast:{deleted:"템플릿 삭제됨",updated:"템플릿 업데이트됨",created:"템플릿 생성됨",applied:"템플릿 적용됨"}}},support:{debugLoggingActive:"디버그 로깅이 활성화되어 있습니다",manageLogs:"관리",collectItem7:"프린터 연결 및 펌웨어 버전",collectItem8:"통합 상태 (Spoolman, MQTT, HA)",collectItem9:"네트워크 인터페이스 (서브넷만)",collectItem10:"Python 패키지 버전",collectItem11:"데이터베이스 상태 확인",collectItem12:"Docker 환경 세부 정보",bundleGenerating:"번들 생성 중...",bundleStepConnection:"프린터 연결 확인 실행 중",bundleStepVirtualPrinters:"가상 프린터 설정 확인 실행 중",bundleStepLogScan:"알려진 문제가 있는지 최근 로그 스캔 중",bundleStepBuild:"지원 번들 ZIP 빌드 중"},fileManager:{title:"파일 관리자",subtitle:"인쇄 파일 정리 및 관리",uploadFiles:"파일 업로드",newFolder:"새 폴더",folderName:"폴더 이름",folderNamePlaceholder:"예: 기능성 부품",renameFile:"파일 이름 바꾸기",renameFolder:"폴더 이름 바꾸기",invalidFilenameChar:'"{{char}}" 문자는 인쇄 파일 이름에 허용되지 않습니다. 프린터 SD 카드가 거부하는 문자: < > : " / \\ | ? *',moveFiles:"{{count}}개 파일 이동",rootNoFolder:"루트 (폴더 없음)",current:"현재",linkFolder:"폴더 연결",linkFolderDescription:'"{{name}}"을(를) 프로젝트 또는 아카이브에 연결하여 빠른 접근.',project:"프로젝트",archive:"아카이브",noProjectsFound:"프로젝트를 찾을 수 없음",noArchivesFound:"아카이브를 찾을 수 없음",unlink:"연결 해제",link:"연결",dragDropFiles:"파일을 여기에 드래그 앤 드롭",dropFilesHere:"파일을 여기에 드롭",orClickToBrowse:"또는 클릭하여 탐색",allFileTypesSupported:"모든 파일 형식 지원. ZIP 파일은 압축 해제됩니다.",zipFilesDetected:"ZIP 파일 감지됨",zipExtractOptions:"ZIP 파일이 압축 해제됩니다. 폴더 구조 처리 방법을 선택하세요:",preserveZipStructure:"ZIP에서 폴더 구조 유지",createFolderFromZip:"ZIP 파일 이름으로 폴더 생성",stlThumbnailGeneration:"STL 썸네일 생성",zipMayContainStl:"ZIP 파일에 STL 파일이 포함될 수 있습니다. 압축 해제 중 썸네일을 생성할 수 있습니다.",thumbnailsCanBeGenerated:"STL 파일의 썸네일을 생성할 수 있습니다. 대형 모델은 처리 시간이 더 걸릴 수 있습니다.",generateThumbnailsForStl:"STL 파일의 썸네일 생성",threemfDetected:"3MF 파일 감지됨",threemfExtractionInfo:"프린터 모델, 재료, 색상 및 인쇄 설정이 3MF 파일에서 자동으로 추출됩니다.",willBeExtracted:"추출 예정",filesExtracted:"{{count}}개 파일 추출됨",uploadComplete:"업로드 완료: {{succeeded}}개 성공",uploadFailed:"업로드 실패",zipFilesFailed:"{{count}}개 파일 실패",uploading:"업로드 중...",changeLink:"링크 변경...",linkTo:"연결 대상...",linkToProjectOrArchive:"프로젝트 또는 아카이브에 연결",addToQueue:"대기열에 추가",schedulePrint:"예약",generateThumbnail:"썸네일 생성",generateThumbnails:"썸네일 생성",generateThumbnailsForMissing:"썸네일이 없는 STL 파일의 썸네일 생성",gridView:"격자 보기",listView:"목록 보기",lowDiskSpaceWarning:"디스크 공간 부족 경고",lowDiskSpaceDetails:"전체 {{total}} 중 {{free}}만 남음. 임계값은 설정에서 {{threshold}}GB로 설정됩니다.",files:"파일",folders:"폴더",size:"크기",free:"여유",allFiles:"모든 파일",allExternal:"외부",externalIsEmpty:"외부 파일 없음",externalEmptyDescription:"연결된 외부 폴더의 파일이 여기에 표시됩니다.",wrap:"줄 바꿈",enableTextWrapping:"텍스트 줄 바꿈 활성화",disableTextWrapping:"텍스트 줄 바꿈 비활성화",collapse:"접기",collapseFoldersByDefault:"기본적으로 폴더 접기",expandFoldersByDefault:"기본적으로 폴더 펼치기",dragToResizeTooltip:"드래그하여 크기 조정, 더블클릭하여 초기화",searchFiles:"파일 검색...",allTypes:"모든 유형",prints:"인쇄물",ascending:"오름차순",descending:"내림차순",resultsCount:"전체 {{total}}개 중 {{showing}}개",selectAll:"모두 선택",deselectAll:"모두 선택 해제",selected:"{{count}}개 선택됨",adding:"추가 중...",loadingFiles:"파일 불러오는 중...",folderIsEmpty:"폴더가 비어 있음",noFilesYet:"파일 없음",folderEmptyDescription:"파일을 업로드하거나 이 폴더로 이동하여 시작하세요.",noFilesDescription:"파일을 업로드하여 인쇄 관련 파일을 정리하세요.",noMatchingFiles:"일치하는 파일 없음",noMatchingFilesDescription:"현재 검색 또는 필터 조건과 일치하는 파일이 없습니다.",clearFilters:"필터 초기화",printedCount:"{{count}}회 인쇄됨",uploadedBy:"업로드한 사람",deleteFolder:"폴더 삭제",deleteFile:"파일 삭제",deleteFilesCount:"{{count}}개 파일 삭제",deleteFolderConfirm:"이 폴더를 삭제하시겠습니까? 안의 모든 파일도 삭제됩니다.",deleteFileConfirm:"이 파일을 삭제하시겠습니까?",deleteFilesConfirm:"선택한 {{count}}개 파일을 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.",deleting:"삭제 중...",noPermissionRenameFolder:"폴더 이름 변경 권한이 없습니다",noPermissionLinkFolder:"폴더 연결 권한이 없습니다",noPermissionDeleteFolder:"폴더 삭제 권한이 없습니다",noPermissionPrint:"인쇄 권한이 없습니다",noPermissionAddToQueue:"대기열 추가 권한이 없습니다",noPermissionSlice:"파일 슬라이싱 권한이 없습니다",noPermissionDownload:"파일 다운로드 권한이 없습니다",noPermissionRenameFile:"파일 이름 변경 권한이 없습니다",noPermissionGenerateThumbnail:"썸네일 생성 권한이 없습니다",noPermissionDeleteFile:"파일 삭제 권한이 없습니다",noPermissionCreateFolder:"폴더 생성 권한이 없습니다",noPermissionUpload:"파일 업로드 권한이 없습니다",noPermissionMoveFiles:"파일 이동 권한이 없습니다",noPermissionDeleteFiles:"파일 삭제 권한이 없습니다",linkExternal:"외부 연결",linkExternalFolder:"외부 폴더 연결",linkExternalFolderDescription:"호스트 디렉토리(NAS, USB, 네트워크 공유)를 파일 관리자에 마운트합니다. 파일은 복사되지 않고 원래 경로에서 직접 접근합니다.",externalFolderNamePlaceholder:"예: NAS 인쇄물",externalPath:"호스트 경로",externalPathHelp:"Docker 호스트의 디렉토리 절대 경로. 컨테이너에 바인드 마운트되어야 합니다.",readOnly:"읽기 전용",readOnlyHelp:"업로드 및 삭제 방지",showHiddenFiles:"숨김 파일 표시 (dotfiles)",externalFolder:"외부 폴더",scanFolder:"스캔",toast:{folderCreated:"폴더 생성됨",folderDeleted:"폴더 삭제됨",fileDeleted:"파일 삭제됨",filesDeleted:"{{count}}개 파일 삭제됨",filesMoved:"파일 이동됨",folderLinked:"폴더 연결됨",folderUnlinked:"폴더 연결 해제됨",externalFolderLinked:"외부 폴더 연결 및 스캔됨",folderScanned:"스캔 완료: {{added}}개 추가, {{removed}}개 제거",addedToQueue:"{{count}}개 파일을 대기열에 추가함",addedToQueuePartial:"{{added}}개 추가됨, {{failed}}개 실패",failedToAddToQueue:"파일 추가 실패: {{error}}",fileRenamed:"파일 이름 변경됨",folderRenamed:"폴더 이름 변경됨",thumbnailsGenerated:"{{count}}개 썸네일 생성됨",thumbnailsGeneratedPartial:"{{succeeded}}개 썸네일 생성됨, {{failed}}개 실패",noStlMissingThumbnails:"썸네일이 없는 STL 파일 없음",failedToGenerateThumbnails:"썸네일 생성 실패: {{error}}",thumbnailGenerated:"썸네일 생성됨",failedToGenerateThumbnail:"썸네일 생성 실패: {{error}}"}},projects:{title:"프로젝트",subtitle:"3D 인쇄 프로젝트 정리 및 추적",newProject:"새 프로젝트",editProject:"프로젝트 편집",deleteProject:"프로젝트 삭제",projectName:"프로젝트 이름",description:"설명",noProjects:"프로젝트 없음",noProjectsFiltered:"{{status}} 프로젝트 없음",noProjectsFilteredHelp:"{{status}} 프로젝트가 없습니다. 상태가 변경되면 여기에 표시됩니다.",createFirst:"첫 번째 프로젝트를 만들어 관련 인쇄물을 정리하고 진행 상황을 추적하며 빌드를 관리하세요.",createFirstButton:"첫 번째 프로젝트 만들기",create:"만들기",files:"파일",prints:"인쇄물",plates:"플레이트",parts:"부품",lastModified:"마지막 수정",deleteConfirm:"이 프로젝트를 삭제하시겠습니까? 아카이브 및 대기열 항목은 연결 해제되지만 삭제되지는 않습니다.",addFiles:"파일 추가",removeFile:"파일 제거",viewDetails:"세부 정보 보기",namePlaceholder:"예: Voron 2.4 빌드",descriptionPlaceholder:"선택적 설명...",urlLabel:"URL",urlPlaceholder:"https://makerworld.com/...",urlInvalid:"URL은 http:// 또는 https://로 시작해야 합니다",openExternalUrl:"프로젝트 URL 열기",coverImageLabel:"커버 사진",coverImageAlt:"프로젝트 커버 사진",coverImageUpload:"업로드",coverImageReplace:"교체",coverImageRemove:"제거",color:"색상",targetPlates:"목표 플레이트",targetPlatesPlaceholder:"예: 25",targetPlatesHelp:"인쇄 작업 수",targetParts:"목표 부품",targetPartsPlaceholder:"예: 150",targetPartsHelp:"필요한 총 개체 수",tagsLabel:"태그 (쉼표로 구분)",tagsPlaceholder:"예: voron, 기능성, 선물",dueDate:"마감일",priority:"우선순위",priorityLow:"낮음",priorityNormal:"보통",priorityHigh:"높음",priorityUrgent:"긴급",statusActive:"활성",statusCompleted:"완료됨",statusArchived:"보관됨",done:"완료",completed:"완료됨",failed:"실패",inQueue:"대기 중",noPrintsYet:"인쇄물 없음",printJobs:"인쇄 작업 (플레이트)",partsPrinted:"인쇄된 부품",failedParts:"실패한 부품",import:"가져오기",export:"내보내기",importProject:"프로젝트 가져오기",exportAll:"모든 프로젝트 내보내기",loading:"프로젝트 불러오는 중...",noEditPermission:"프로젝트 편집 권한이 없습니다",noDeletePermission:"프로젝트 삭제 권한이 없습니다",noCreatePermission:"프로젝트 생성 권한이 없습니다",noImportPermission:"프로젝트 가져오기 권한이 없습니다",noExportPermission:"프로젝트 내보내기 권한이 없습니다",toast:{created:"프로젝트 생성됨",updated:"프로젝트 업데이트됨",deleted:"프로젝트 삭제됨",imported:"프로젝트 가져옴",multipleImported:"{{count}}개 프로젝트 가져옴",importFailed:"가져오기 실패",exported:"프로젝트 내보냄 (메타데이터만)"}},projectDetail:{notFound:"프로젝트를 찾을 수 없음",backToProjects:"프로젝트로 돌아가기",export:"내보내기",exportProject:"프로젝트 내보내기",noExportPermission:"프로젝트 내보내기 권한이 없습니다",noEditPermission:"프로젝트 편집 권한이 없습니다",partOf:"속한 프로젝트:",priorityLabel:"우선순위:",noPrints:"이 프로젝트에 아직 인쇄물이 없습니다",status:{active:"활성",completed:"완료됨",archived:"보관됨"},priority:{low:"낮음",normal:"보통",high:"높음",urgent:"긴급"},dueDate:{overdue:"기한 초과",today:"오늘 마감",daysLeft:"{{count}}일 남음"},progress:{platesProgress:"플레이트 진행률",partsProgress:"부품 진행률",printJobs:"인쇄 작업",parts:"부품",percentComplete:"{{percent}}% 완료",remaining:"{{count}}개 남음"},stats:{printJobs:"인쇄 작업",total:"합계",failed:"{{count}}개 실패",partsPrinted:"{{count}}개 부품 인쇄됨",printTime:"인쇄 시간",filamentUsed:"사용된 필라멘트"},cost:{title:"비용 추적",filamentCost:"필라멘트 비용",energy:"에너지",totalCost:"총 비용",total:"합계",includesBom:"BOM 포함",budget:"예산",remaining:"남은 예산"},subProjects:{title:"하위 프로젝트 ({{count}})"},notes:{title:"메모",noEditPermission:"메모 편집 권한이 없습니다",placeholder:"이 프로젝트에 대한 메모 추가...",empty:"아직 메모가 없습니다. 편집을 클릭하여 메모를 추가하세요."},files:{title:"파일",linkFolders:"파일 관리자에서 폴더 연결",forQuickAccess:"빠른 접근을 위해 이 프로젝트에 연결합니다.",fileCount:"{{count}}개 파일",empty:"연결된 폴더가 없습니다. 파일 관리자로 이동하여 폴더를 이 프로젝트에 연결하세요.",noFiles:"이 폴더에 파일이 없습니다.",print:"지금 인쇄",addToQueue:"대기열에 추가"},bom:{title:"부품 목록",acquired:"{{total}}개 중 {{completed}}개 확보",showAll:"전체 표시",hideDone:"완료된 것 숨기기",addPart:"부품 추가",noAddPermission:"부품 추가 권한이 없습니다",partNamePlaceholder:"부품 이름 (예: M3x8 나사)",partName:"부품 이름",qty:"수량",price:"가격 ({{currency}})",sourcingUrlPlaceholder:"구매 URL (선택사항)",remarksPlaceholder:"비고 (선택사항)",deletePart:"부품 삭제",deleteConfirm:'"{{name}}"을(를) 삭제하시겠습니까?',noUpdatePermission:"부품 업데이트 권한이 없습니다",noEditPermission:"부품 편집 권한이 없습니다",noDeletePermission:"부품 삭제 권한이 없습니다",totalCost:"총 비용:",empty:"부품 목록에 부품이 없습니다. 하드웨어, 전자 부품 또는 기타 구성품을 추가하여 조달이 필요한 것을 추적하세요."},timeline:{title:"활동 타임라인",empty:"아직 활동이 없습니다."},template:{saveAsTemplate:"템플릿으로 저장",noCreatePermission:"템플릿 생성 권한이 없습니다"},queue:{title:"대기열",viewAll:"전체 보기",printing:"{{count}}개 인쇄 중",queued:"{{count}}개 대기 중"},prints:{title:"인쇄물 ({{count}})"},toast:{projectUpdated:"프로젝트 업데이트됨",partAdded:"부품 추가됨",partRemoved:"부품 제거됨",exportFailed:"내보내기 실패",projectExported:"프로젝트 내보냄",templateCreated:"템플릿 생성됨"}},system:{title:"시스템 정보",version:"버전",uptime:"가동 시간",cpuUsage:"CPU 사용량",memoryUsage:"메모리 사용량",diskUsage:"디스크 사용량",networkInfo:"네트워크 정보",logs:"로그",debugMode:"디버그 모드",enableDebug:"디버그 로깅 활성화",disableDebug:"디버그 로깅 비활성화",downloadLogs:"로그 다운로드",clearLogs:"로그 초기화",dockerInfo:"Docker 정보",containerName:"컨테이너 이름",imageName:"이미지 이름",platform:"플랫폼",architecture:"아키텍처"},library:{title:"필라멘트 라이브러리",addFilament:"필라멘트 추가",editFilament:"필라멘트 편집",deleteFilament:"필라멘트 삭제",vendor:"제조사",material:"재료",color:"색상",kFactor:"K 계수",temperature:"온도",noFilaments:"라이브러리에 필라멘트 없음",deleteConfirm:"이 필라멘트를 삭제하시겠습니까?",importFromPrinter:"프린터에서 가져오기",exportToFile:"파일로 내보내기"},slice:{title:"모델 슬라이싱",action:"슬라이싱",slicing:"슬라이싱 중…",printer:"프린터 프로필",process:"프로세스 프로필",filament:"필라멘트 프로필",filamentSlot:"필라멘트 {{index}} ({{type}})",selectPreset:"— 프리셋 선택 —",loadingPresets:"프리셋 불러오는 중…",analyzingPlateFilaments:"플레이트 필라멘트 분석 중…",analyzingPlateFilamentsHint:"이 플레이트가 사용하는 AMS 슬롯을 확인하기 위해 미리보기 슬라이싱을 실행합니다. 캐시 후에는 재오픈이 즉각적입니다.",previewToast:"{{name}} 분석 중 — {{elapsed}}",previewWithProgress:"{{name}} 분석 중 — {{stage}} ({{percent}}%) — {{elapsed}}",notUsedByPlate:"— 이 플레이트에서 사용되지 않음",noPresetsForSlot:"사용 가능한 프리셋 없음",presetsLoadFailed:"프리셋 불러오기 실패. 먼저 설정 → 프로필에서 가져오세요.",refreshPresets:"새로 고침",refreshPresetsTitle:"프리셋 새로 고침 — 최신 클라우드 및 번들 목록 가져오기 (Bambu Studio 또는 Bambu Handy에서 프리셋 삭제 후 사용)",allPresetsRequired:"모든 프리셋을 선택해야 합니다",enqueuing:"슬라이싱 작업 제출 중…",queued:"대기 중…",failed:"슬라이싱 실패. 슬라이서 사이드카 로그를 확인하세요.",startedToast:"백그라운드에서 {{name}} 슬라이싱 중…",queuedToast:"대기 중: {{name}} — {{elapsed}}",runningToast:"{{name}} 슬라이싱 중 — {{elapsed}}",runningWithProgress:"{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",completedToast:"{{name}} 슬라이싱 완료",failedToast:"{{name}} 슬라이싱 실패: {{detail}}",tier:{local:"가져온 것",cloud:"Bambu Cloud",orcaCloud:"Orca Cloud",standard:"표준"},cloud:{notAuthenticated:"클라우드 프리셋을 보려면 Bambu Cloud에 로그인하세요 (설정 → 프로필 → Bambu Cloud).",expired:"Bambu Cloud 세션이 만료되었습니다 — 다시 로그인하여 클라우드 프리셋을 새로고침하세요.",unreachable:"현재 Bambu Cloud에 연결할 수 없습니다. 로컬 및 표준 프리셋은 계속 작동합니다."},orcaCloud:{notAuthenticated:"Orca 프리셋을 보려면 Orca Cloud (프로필 → Orca Cloud)에 로그인하세요.",expired:"Orca Cloud 세션이 만료되었습니다 — Orca 프리셋을 새로고침하려면 다시 로그인하세요.",unreachable:"Orca Cloud에 현재 연결할 수 없습니다. 다른 프리셋은 계속 작동합니다."},actionAll:"{{count}}개 플레이트 모두 슬라이싱",actionAllTitle:"모든 플레이트를 단일 다중 플레이트 출력으로 슬라이싱합니다 (단일 아카이브). 필라멘트 선택은 프로젝트가 정의하는 모든 슬롯을 포함합니다.",allPlatesToggle:"{{count}}개 플레이트 모두 슬라이싱",otherPrinters:"다른 프린터",bundle:"슬라이서 번들",bundleNone:"— 없음 (개별로 프리셋 선택) —",bundleAllRequired:"번들 프로세스 및 모든 필라멘트 슬롯을 선택해야 합니다",runningWithProgressMultiPlate:"플레이트 {{plateIndex}}/{{plateCount}} • {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",failedTitle:"슬라이싱 실패",bedType:{label:"빌드 플레이트",auto:"자동 (프로세스 프리셋 사용)",coolPlate:"쿨 플레이트",coolPlateSuperTack:"쿨 플레이트 슈퍼택",engineering:"엔지니어링 플레이트",highTemp:"고온 플레이트",texturedPEI:"텍스처 PEI 플레이트",smoothPEI:"매끄러운 PEI 플레이트"}},spoolman:{title:"Spoolman 통합",enabled:"Spoolman 활성화됨",url:"Spoolman URL",connected:"연결됨",disconnected:"연결되지 않음",testConnection:"연결 테스트",sync:"동기화",syncing:"동기화 중...",lastSync:"마지막 동기화",linkToSpoolman:"Spoolman에 연결",openInSpoolman:"Spoolman에서 열기",unlinkSpool:"스풀 연결 해제",unlinkConfirmTitle:"스풀 할당 해제?",unlinkConfirmMessage:"이 슬롯에서 스풀을 제거합니다. 스풀 데이터 자체는 변경되지 않습니다.",selectSpool:"스풀 선택",noUnlinkedSpools:"할당되지 않은 스풀 없음",linkSuccess:"스풀이 성공적으로 할당되었습니다",linkFailed:"스풀 할당 실패",unlinkSuccess:"스풀이 성공적으로 할당 해제되었습니다",unlinkFailed:"스풀 할당 해제 실패",linkedSpool:"할당된 스풀",spoolId:"스풀 ID",fillSourceLabel:"(Spoolman)",weight:"무게",remaining:"남은 양",disableWeightSync:"AMS 예상 무게 동기화 비활성화",disableWeightSyncDesc:"AMS 추정치에서 남은 용량을 업데이트하지 않습니다. AMS 백분율 기반 추정 대신 Spoolman의 사용량 추적을 선호하는 경우 사용하세요. 새 스풀은 여전히 AMS 추정치를 초기 무게로 사용합니다.",reportPartialUsage:"실패한 인쇄물에 대한 부분 사용량 보고",reportPartialUsageDesc:"인쇄가 실패하거나 취소될 때 레이어 진행률을 기반으로 해당 시점까지 사용된 예상 필라멘트를 보고합니다."},inventory:{title:"스풀 재고",spoolmanMixedContentTitle:"HTTPS에서 Spoolman을 불러올 수 없음 — 브라우저가 혼합 콘텐츠를 차단함",spoolmanMixedContentBody:"Bambuddy가 HTTPS로 서비스되고 있지만 Spoolman URL은 여전히 HTTP입니다. 브라우저는 보안상 혼합 콘텐츠를 차단하므로 내장된 Spoolman UI가 렌더링되지 않습니다. 이 기능이 작동하려면 Spoolman이 HTTPS로 접근 가능해야 합니다.",spoolmanMixedContentFixReverseProxy:"Spoolman을 Bambuddy와 같은 리버스 프록시(Traefik / Nginx / Caddy) 뒤에 HTTPS로 배치한 다음 설정에서 Spoolman URL을 새 HTTPS 주소로 업데이트하세요.",spoolmanMixedContentFixOpenNewTab:"임시 방편으로 HTTP로 새 브라우저 탭에서 Spoolman을 여세요 — 혼합 콘텐츠 규칙은 내장 프레임에만 적용되므로 독립 탭은 여전히 작동합니다.",spoolmanOpenInNewTab:"새 탭에서 Spoolman 열기",labels:{title:"스풀 라벨 인쇄",selectedCount:"{{count}}개 선택됨",pickSpools:"라벨을 인쇄할 스풀 선택:",searchPlaceholder:"이름, 브랜드 또는 #ID 검색",filterByMaterial:"재료:",allMaterials:"전체",selectVisible:"보이는 모든 항목 선택 ({{count}})",deselectVisible:"보이는 항목 선택 해제",clearAll:"모두 초기화",noSpoolsToShow:"표시할 스풀이 없습니다. 필터를 조정하고 다시 시도하세요.",noMatches:"현재 검색 또는 필터와 일치하는 스풀이 없습니다.",printOne:"이 스풀의 라벨 인쇄",printLabels:"라벨 인쇄…",bulkTitle:"현재 표시된 {{count}}개에서 라벨을 인쇄할 스풀 선택",noSpoolsTitle:"라벨을 붙일 스풀 없음",error:"라벨을 생성할 수 없습니다: {{msg}}",templates:{box40x30:{label:"박스 라벨 (40 × 30 mm)",hint:"페이지당 단일 라벨; 일반 DK/Brother 롤 크기, 필라멘트 가방 및 보관함 라벨에 적합."},box:{label:"박스 라벨 (62 × 29 mm)",hint:"페이지당 단일 라벨; Brother PT/QL 및 Dymo 소형 라벨에 맞는 크기."},averyL7160:{label:"Avery L7160 — A4 시트 (38.1 × 63.5 mm × 21)",hint:"EU 시트; A4 페이지당 21개 라벨."},avery5160:{label:"Avery 5160 — US Letter 시트 (25.4 × 66.7 mm × 30)",hint:"US 시트; Letter 페이지당 30개 라벨."},amsHolderSmall:{label:"AMS 홀더 — 소형 (74 × 33 mm)",hint:"페이지당 단일 레이블; MakerWorld 모델 752566 (AMS 필라멘트 레이블 홀더)의 인쇄 가능 레이블과 일치합니다."},amsHolderLarge:{label:"AMS 홀더 — 대형 (75 × 55 mm)",hint:"페이지당 단일 레이블; AMS 필라멘트 레이블 홀더의 카드스톡 삽입 변형에 맞습니다. 스와치, 브랜드, 재질, ID, QR 코드에 충분한 공간이 있습니다."}},sortBy:{label:"정렬:",id:"ID 순",color:"색상 순"}},addSpool:"스풀 추가",editSpool:"스풀 편집",copySpool:"스풀 복사",material:"재료",selectMaterial:"재료 선택...",subtype:"하위 유형",brand:"브랜드",searchBrand:"브랜드 검색...",useCustomBrand:'"{{brand}}" 사용',useCustomMaterial:"사용자 지정 재료 사용: {{material}}",colorName:"색상 이름",colorNamePlaceholder:"제이드 화이트, 파이어 레드...",color:"색상",hexColor:"16진수 색상",pickColor:"사용자 지정 색상 선택",labelWeight:"라벨 무게",coreWeight:"빈 스풀 무게",searchSpoolWeight:"스풀 무게 검색...",weightUsed:"사용됨",currentWeight:"남은 무게",measuredWeight:"측정된 무게",spoolName:"스풀",costPerKg:"kg당 비용",storageLocation:"보관 위치",storageLocationPlaceholder:"예: 선반 A, 서랍 1",openInInventory:"재고에서 열기",measuredWeightError:"측정된 무게는 {{min}}g과 {{max}}g 사이여야 합니다.",slicerFilament:"슬라이서 필라멘트",slicerFilamentName:"슬라이서 프리셋 이름",slicerPreset:"슬라이서 프리셋",searchPresets:"필라멘트 프리셋 검색...",selectedPreset:"선택됨",noPresetsFound:"프리셋을 찾을 수 없음",tempOverrides:"온도 재정의",note:"메모",notePlaceholder:"이 스풀에 대한 추가 메모...",category:"카테고리",categoryPlaceholder:"예: 생산, 프로토타입, 고객 A",categoryNone:"미분류",lowStockThresholdOverride:"재고 부족 임계값 (이 스풀)",lowStockThresholdOverrideHelp:"전역 임계값({{global}}%)을 사용하려면 비워두세요.",clearRfid:"RFID 태그 초기화",rfidCleared:"RFID 태그가 초기화되었습니다",archive:"보관",restore:"복원",noSpools:"아직 스풀이 없습니다. 첫 번째 스풀을 추가하여 시작하세요.",noAvailableSpools:"사용 가능한 스풀이 없습니다. 재고에 스풀을 추가하거나 먼저 다른 슬롯에서 해제하세요.",kProfiles:"K-프로필",addKProfile:"K-프로필 추가",assignSpool:"스풀 할당",unassignSpool:"할당 해제",assignSuccess:"스풀 할당 및 AMS 슬롯 구성됨",assignFailed:"스풀 할당 실패",selectSpool:"이 슬롯에 할당할 스풀 선택",assigned:"할당됨",assigning:"할당 중...",searchSpools:"스풀 검색...",showAllSpools:"모든 스풀 표시",spoolmanSpools:"Spoolman 스풀",allMaterials:"모든 재료",filterByBrand:"브랜드로 필터...",showArchived:"보관된 항목 표시",quickAdd:"빠른 추가 (재고)",quantity:"수량",stock:"재고",configured:"구성됨",spoolsCreated:"{{count}}개 스풀 생성됨",spoolsPartiallyCreated:"{{total}}개 중 {{created}}개 스풀 생성됨 (일부 실패)",spoolCreated:"스풀 생성됨",spoolUpdated:"스풀 업데이트됨",spoolDeleted:"스풀 삭제됨",deepLinkSpoolNotFound:"스풀을 찾을 수 없음",deepLinkFetchFailed:"스풀을 불러올 수 없음 — 다시 시도하세요",spoolArchived:"스풀 보관됨",spoolRestored:"스풀 복원됨",kProfileSaveFailed:"K-프로필 설정을 저장할 수 없습니다",syncWeightSpoolNotFound:"스풀을 찾을 수 없음 — 삭제되었을 수 있습니다",syncWeightSpoolmanUnreachable:"Spoolman에 연결할 수 없음 — 나중에 다시 시도하세요",syncWeightFailed:"무게 동기화 실패",spoolmanUnreachable:"Spoolman에 연결할 수 없습니다 — 나중에 다시 시도하세요",deleteSpoolNotFound:"스풀을 찾을 수 없음 — 이미 삭제되었을 수 있습니다",deleteFailed:"스풀 삭제 실패",archiveSpoolNotFound:"스풀을 찾을 수 없음 — 이미 삭제되었을 수 있습니다",archiveFailed:"스풀 보관 실패",restoreSpoolNotFound:"스풀을 찾을 수 없음 — 이미 삭제되었을 수 있습니다",restoreFailed:"스풀 복원 실패",saveFailed:"변경 사항 저장 실패",tagClearFailed:"태그 초기화 실패",deleteConfirm:"이 스풀을 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.",archiveConfirm:"이 스풀을 보관하시겠습니까?",advancedSettings:"고급 설정",filamentInfoTab:"필라멘트 정보",paProfileTab:"PA 프로필",filamentInfo:"필라멘트",additional:"추가",loadingPresets:"클라우드 프리셋 불러오는 중...",cloudConnected:"클라우드 연결됨",cloudNotConnected:"클라우드 연결되지 않음 (기본값 사용)",recentColors:"최근",searchColors:"색상 검색...",searchResults:"검색 결과",allColors:"모든 색상",commonColors:"일반 색상",showLess:"간략히 보기",showAll:"모두 보기",noColorsFound:"검색과 일치하는 색상 없음",noResults:"일치하는 항목 없음",extraColorsLabel:"추가 색상",extraColorsPlaceholder:"EC984C,#6CD4BC,A66EB9,D87694",extraColorsHint:"2~8개의 16진수 색상값을 쉼표로 구분하여 붙여넣으세요. 그라데이션으로 렌더링됩니다.",extraColorsInvalid:"유효하지 않은 16진수 무시됨: {{tokens}}",colorEffectLabel:"효과",colorEffect:{none:"없음",sparkle:"스파클",wood:"우드",marble:"마블",glow:"글로우",matte:"매트",silk:"실크",galaxy:"갤럭시",rainbow:"레인보우",metal:"메탈",translucent:"반투명",gradient:"그라데이션",dualColor:"듀얼 컬러",triColor:"트리 컬러",multicolor:"멀티컬러"},selectMaterialFirst:"먼저 필라멘트 정보 탭에서 재료를 선택해 주세요.",noPrintersConfigured:"구성된 프린터 없음. PA 프로필을 사용하려면 프린터를 추가하세요.",matchingFilter:"일치",anyBrand:"모든 브랜드",anyVariant:"모든 변형",autoSelect:"자동 선택",matches:"일치",match:"일치",noMatches:"일치 없음",connected:"연결됨",offline:"오프라인",printerOffline:"프린터가 오프라인입니다. 연결하여 보정 프로필을 확인하세요.",noKProfilesMatch:"선택한 필라멘트와 일치하는 K-프로필이 없습니다.",leftNozzle:"왼쪽 노즐",rightNozzle:"오른쪽 노즐",profilesSelected:"보정 프로필 선택됨",totalInventory:"총 재고",totalConsumed:"총 소비량",byMaterial:"재료별",inPrinter:"프린터 내",lowStock:"재고 부족",sinceTracking:"추적 시작 이후",loadedInAms:"AMS/외부에 장착됨",remaining:"남은 양",weightCheck:"무게 확인",lastWeighed:"마지막 계량",neverWeighed:"계량 기록 없음",search:"스풀 검색...",showing:"표시 중",to:"~",of:"/",show:"표시",spools:"스풀",spool:"스풀",page:"페이지",noSpoolsMatch:"결과를 찾을 수 없음",noSpoolsMatchDesc:"검색 또는 필터를 조정하여 원하는 항목을 찾아보세요.",active:"활성",archived:"보관됨",all:"전체",used:"사용됨",new:"새것",clearFilters:"필터 초기화",table:"테이블",cards:"카드",net:"순",groupSimilar:"그룹화",groupedSpools:"동일한 스풀 {{count}}개",groupedRows:"행",columns:"열",configureColumns:"열 구성",configureColumnsDesc:"드래그하여 열 순서를 변경하거나 화살표를 사용하세요. 눈 아이콘으로 표시 여부를 전환합니다.",visible:"표시됨",reset:"초기화",cancel:"취소",applyChanges:"변경 사항 적용",moveUp:"위로 이동",moveDown:"아래로 이동",hideColumn:"열 숨기기",showColumn:"열 표시",linkToSpool:"스풀에 연결",tagLinked:"태그가 스풀에 연결됨",tagLinkFailed:"태그 연결 실패",tagAlreadyLinked:"태그가 이미 다른 스풀에 연결됨",unknownTag:"알 수 없는 RFID 태그 감지됨",usageHistory:"사용 기록",noUsageHistory:"사용 기록 없음",printName:"인쇄 이름",weightConsumed:"소비 무게",clearHistory:"초기화",historyCleared:"사용 기록 초기화됨",fillSourceLabel:"(재고)",lowStockThresholdError:"임계값은 0.1에서 99.9 사이여야 합니다",assignMismatchTitle:"재료 불일치",assignMismatchMessage:'선택한 스풀 재료 "{{spoolMaterial}}"이(가) {{location}}의 트레이 재료 "{{trayMaterial}}"과(와) 일치하지 않습니다. 그래도 할당하시겠습니까?',assignMismatchConfirm:"그래도 할당",assignPartialMismatchMessage:'스풀 재료 "{{spoolMaterial}}"이(가) {{location}}의 "{{trayMaterial}}"과(와) 유사하지만 정확히 일치하지 않습니다. 계속하시겠습니까?',assignProfileMismatchMessage:'스풀 프로필 "{{spoolProfile}}"이(가) {{location}}의 트레이 프로필 "{{trayProfile}}"과(와) 일치하지 않습니다. 계속하시겠습니까?',assignReconfigureNote:"AMS 슬롯이 스풀의 프로필을 사용하도록 재구성됩니다.",spoolmanFilamentCatalog:"Spoolman 필라멘트 카탈로그",pickFromSpoolmanCatalog:"Spoolman 카탈로그에서 선택…",spoolmanFilamentSelected:"Spoolman 카탈로그에서 필라멘트 선택됨",spoolmanFilamentUnlinked:"필라멘트 카탈로그 연결 해제됨",noSpoolmanFilaments:"Spoolman 카탈로그에서 필라멘트를 찾을 수 없음",spoolmanFilamentColorSwatch:"필라멘트 색상",spoolWeightManagedBySpoolman:"빈 스풀 무게는 Spoolman에서 필라멘트 유형별로 관리됩니다",spoolmanCatalogLoadFailed:"Spoolman 필라멘트 카탈로그 불러오기 실패",subtitle:"스풀 관리",storageLocationNone:"위치 미설정",resetConsumedCounter:"카운터 초기화",resetConsumedCounterTooltip:"이 스풀의 소비된 그램 카운터를 0으로 초기화합니다. 잔여 무게는 변경되지 않습니다.",resetConsumedCounterConfirm:"이 스풀의 소비된 그램 카운터를 0으로 초기화하시겠습니까? 이후 인쇄는 처음부터 추적됩니다. 스풀 자체, 잔여 무게 계산 및 설정은 변경되지 않습니다.",resetAllConsumedCounters:"모든 카운터 초기화",resetAllConsumedCountersTooltip:"모든 스풀의 소비된 그램 카운터를 0으로 초기화합니다. 잔여 무게는 변경되지 않습니다.",resetAllConsumedCountersConfirm:'{{count}}개 스풀(아카이브 포함)의 소비된 그램 카운터를 모두 0으로 초기화하시겠습니까? 이는 "총 소비량" 통계를 지워 이후 인쇄가 처음부터 추적되도록 합니다. 스풀과 잔여 무게는 변경되지 않습니다.',consumedCounterReset:"카운터가 초기화되었습니다",allConsumedCountersReset:"{{count}}개 스풀의 카운터가 초기화되었습니다",resetConsumedCounterFailed:"카운터 초기화 실패"},timelapse:{title:"타임랩스",create:"타임랩스 만들기",download:"다운로드",delete:"삭제",preview:"미리보기",frameRate:"프레임 속도",quality:"품질",processing:"처리 중...",noTimelapses:"사용 가능한 타임랩스 없음"},ams:{title:"AMS",slot:"슬롯",empty:"비어 있음",emptySlot:"빈 슬롯",unknown:"알 수 없음",humidity:"습도",temperature:"온도",filamentType:"필라멘트 유형",filamentColor:"색상",remaining:"남은 양",history:"AMS 기록",noHistory:"기록 없음",configureSlot:"슬롯 구성",externalSpool:"외부 스풀",profile:"프로필",kFactor:"K 계수",fill:"채우기",configure:"구성",used:"사용됨",remainingUnit:"남음",slotEmpty:"비어 있음",emptySlotReset:"필라멘트가 할당되지 않음"},printModal:{title:"인쇄 시작",selectPrinter:"프린터 선택",selectPlate:"플레이트 선택",filamentMapping:"필라멘트 매핑",totalCost:"총 비용:",slotRemainingShort:" - {{grams}}g 남음",printSettings:"인쇄 설정",bedLeveling:"베드 레벨링",flowCalibration:"유량 보정",vibrationCalibration:"진동 보정",layerInspection:"첫 번째 레이어 검사",timelapse:"타임랩스",startPrint:"인쇄 시작",addToQueue:"대기열에 추가",cancel:"취소",noPrintersAvailable:"사용 가능한 프린터 없음",printerBusy:"프린터가 사용 중입니다",printerOffline:"프린터가 오프라인입니다",sameTypeDifferentColor:"같은 유형, 다른 색상",filamentTypeNotLoaded:"필라멘트 유형이 장착되지 않음",openCalendar:"달력 열기",leftNozzle:"L",rightNozzle:"R",leftNozzleTooltip:"왼쪽 노즐",rightNozzleTooltip:"오른쪽 노즐",filamentOverride:"필라멘트 재정의",filamentOverrideHint:"선택적으로 모델 기반 할당을 위해 필라멘트를 재정의합니다. 스케줄러는 원래 3MF 값 대신 선택한 필라멘트와 일치시킵니다.",originalFilament:"원래",overrideWith:"재정의",resetToOriginal:"원래대로 초기화",insufficientFilamentTitle:"필라멘트 부족",insufficientFilamentMessage:"일부 할당된 스풀에 이 인쇄에 필요한 것보다 적은 필라멘트가 남아 있습니다:",insufficientFilamentLine:"{{printer}} - {{slot}}: {{required}}g 필요, {{remaining}}g 남음",printAnyway:"그래도 인쇄",forceColorMatch:"색상 일치 강제",staggerPrinterStarts:"프린터 시작 분산",staggerGroupSize:"그룹 크기",staggerInterval:"간격 (분)",staggerPreview:"{{printers}}대 프린터 → {{size}}대씩 {{groups}}개 그룹, 매 {{interval}}분마다 시작",staggerLastGroup:"마지막 그룹: {{count}}",staggerTotal:"합계: {{minutes}}분",staggerToPrinters:"{{count}}대 프린터에 분산",gcodeInjection:"자동 인쇄 G-code 삽입"},backup:{includesEncryptionKey:"로컬 백업에는 MFA 암호화 키 파일(DATA_DIR/.mfa_encryption_key)이 포함되어 백업 ZIP이 자체 완결됩니다. ZIP 파일을 민감하게 취급하세요 — 파일을 가진 누구나 내부에 저장된 OIDC 클라이언트 비밀과 TOTP 비밀을 복호화할 수 있습니다.",title:"백업 및 복원",createBackup:"백업 만들기",restoreBackup:"백업 복원",restoreDescription:"백업 파일에서 모든 데이터 교체",downloadBackup:"백업 다운로드",uploadBackup:"백업 업로드",lastBackup:"마지막 백업",autoBackup:"자동 백업",backupNow:"지금 백업",restoreWarning:"경고: 백업을 복원하면 현재 모든 데이터를 덮어씁니다.",includeArchives:"아카이브 포함",includeSettings:"설정 포함",includeProfiles:"프로필 포함",backupSuccess:"백업이 성공적으로 생성되었습니다",restoreSuccess:"백업이 성공적으로 복원되었습니다",backupFailed:"백업 실패",restoreFailed:"복원 실패",restoreNote:"복원 중 가상 프린터가 중지됩니다",githubBackup:"Git 백업",enabled:"활성화됨",cloudLoginRequired:"Bambu 클라우드 로그인 필요. GitHub 백업을 활성화하려면 프로필 → 클라우드 프로필에서 로그인하세요.",cloudLoginRequiredShort:"클라우드 로그인 필요",githubDescription:"백업 및 버전 기록을 위해 비공개 GitHub 저장소에 프로필을 자동으로 동기화합니다.",repositoryUrl:"저장소 URL",repoUrlPlaceholderGitHub:"https://github.com/username/repo-name",repoUrlPlaceholderGitea:"https://gitea.example.com/username/repo-name",repoUrlPlaceholderForgejo:"https://forgejo.example.com/username/repo-name",repoUrlPlaceholderGitLab:"https://gitlab.com/username/repo-name",allowInsecureHttp:"비보안 HTTP 허용",allowInsecureHttpHint:"TLS가 없는 개인 네트워크의 자체 호스팅 인스턴스에 활성화",personalAccessToken:"개인 액세스 토큰",tokenSaved:"(저장됨)",enterNewToken:"업데이트하려면 새 토큰 입력",tokenHint:"콘텐츠 읽기/쓰기 권한이 있는 세분화된 토큰",branch:"브랜치",provider:"Git 제공자",providerGitHub:"GitHub",providerGitLab:"GitLab",providerGitea:"Gitea",providerForgejo:"Forgejo",manualOnly:"수동만",hourly:"매시간",daily:"매일",weekly:"매주",includeInBackup:"백업에 포함",kProfiles:"K-프로필",kProfilesDescription:"연결된 프린터의 압력 전진 보정",noPrintersConnected:"연결된 프린터 없음",printersConnected:"{{total}}개 중 {{connected}}개 연결됨",cloudProfiles:"클라우드 프로필",cloudProfilesDescription:"Bambu 클라우드의 필라멘트, 프린터 및 프로세스 프리셋",appSettings:"앱 설정",appSettingsDescription:"Bambuddy 구성 (전체 데이터베이스)",spoolInventory:"스풀 재고",spoolInventoryDescription:"필라멘트 스풀, 사용 기록 및 비용 추적",printArchives:"인쇄 아카이브",printArchivesDescription:"인쇄 기록 메타데이터 (gcode/3MF 파일 제외)",lastBackupAt:"마지막 백업:",noBackupsYet:"아직 백업 없음",next:"다음:",startingBackup:"백업 시작 중...",test:"테스트",enableBackup:"백업 활성화",testConnection:"연결 테스트",enterRepoUrl:"저장소 URL 입력",enterRepoAndToken:"저장소 URL 및 액세스 토큰 입력",repoRequired:"저장소 URL이 필요합니다",tokenRequired:"액세스 토큰이 필요합니다",githubBackupEnabled:"GitHub 백업 활성화됨",tokenUpdated:"토큰 업데이트됨",settingsSaved:"설정 저장됨",failedToSave:"저장 실패: {{message}}",backupCompleteFiles:"백업 완료 - {{count}}개 파일 업데이트됨",backupSkippedNoChanges:"변경 사항 없어 백업 건너뜀",backupFailed2:"백업 실패: {{message}}",clearedLogs:"{{count}}개 로그 초기화됨",failedToClearLogs:"로그 초기화 실패: {{message}}",history:"기록",clear:"초기화",date:"날짜",status:"상태",commit:"커밋",localBackup:"로컬 백업",localBackupDescription:"데이터베이스, 아카이브, 업로드 및 모든 파일을 포함한 Bambuddy 데이터의 전체 백업을 만듭니다.",downloadBackupLabel:"백업 다운로드",completeBackupZip:"전체 백업: 데이터베이스 + 모든 파일 (ZIP)",download:"다운로드",preparingBackup:"백업 준비 중...",creatingArchive:"백업 아카이브 생성 중... 대용량 아카이브의 경우 시간이 걸릴 수 있습니다.",downloadingFile:"백업 파일 다운로드 중...",backupDownloaded:"백업이 성공적으로 다운로드되었습니다",failedToCreateBackup:"백업 생성 실패: {{message}}",restore:"복원",restoreReplacesAll:"복원은 모든 데이터를 교체합니다.",restoreReplacesAllDetail:"현재 데이터베이스와 파일이 완전히 교체됩니다. 복원 후 재시작이 필요합니다.",restoreConfirmTitle:"백업 복원",restoreConfirmMessage:'"{{filename}}"에서 복원하시겠습니까? 현재 데이터베이스와 모든 파일이 완전히 교체됩니다. 복원 후 애플리케이션을 재시작해야 합니다.',restoreConfirmButton:"백업 복원",uploadingFile:"백업 파일 업로드 중...",backupRestoredRestart:"백업 복원됨. Bambuddy를 재시작하세요.",failedToRestore:"백업 복원 실패. 파일 형식을 확인하세요.",reloadNow:"지금 새로고침",creatingBackup:"백업 만드는 중",restoringBackup:"백업 복원 중",preparing:"준비 중...",processing:"처리 중...",doNotClosePage:"이 페이지를 닫거나 다른 곳으로 이동하지 마세요. 대용량 백업의 경우 몇 분이 걸릴 수 있습니다.",restoring:"복원 중...",restoreComplete:"복원 완료",restoreFailed2:"복원 실패",importSettings:"백업 파일에서 설정 가져오기",pleaseWaitRestoring:"데이터가 복원되는 동안 기다려 주세요",selectBackupFile:"백업 파일 클릭하여 선택 (.json 또는 .zip)",duplicateHandling:"중복 처리 방법:",matchPrinters:"프린터",matchPrintersBy:"일련번호로 일치",matchSmartPlugs:"스마트 플러그",matchSmartPlugsBy:"IP 주소로 일치",matchNotificationProviders:"알림 제공자",matchNotificationProvidersBy:"이름으로 일치",matchFilaments:"필라멘트",matchFilamentsBy:"이름 + 유형 + 브랜드로 일치",matchArchives:"아카이브",matchArchivesBy:"콘텐츠 해시로 일치 (항상 건너뜀)",matchPendingUploads:"대기 중인 업로드",matchPendingUploadsBy:"파일 이름으로 일치",matchSettingsTemplates:"설정 및 템플릿",matchSettingsTemplatesBy:"항상 덮어씀",replaceExisting:"기존 데이터 교체",keepExisting:"기존 데이터 유지",overwriteDescription:"백업 데이터로 이미 존재하는 항목 덮어쓰기",keepDescription:"아직 존재하지 않는 항목만 복원",overwriteCaution:"주의:",overwriteWarning:"덮어쓰기는 현재 구성을 백업 데이터로 교체합니다. 보안상 프린터 액세스 코드는 절대 덮어쓰지 않습니다.",cancel:"취소",processingBackup:"백업 파일 처리 중...",itemsRestored:"복원된 항목",itemsSkipped:"건너뛴 항목",restored:"복원됨",skippedAlreadyExist:"건너뜀 (이미 존재)",filesCategory:"파일 (3MF, 썸네일 등)",andMore:"...및 {{count}}개 더",newApiKeysGenerated:"새 API 키 생성됨",keysShownOnce:"이 키는 한 번만 표시됩니다. 지금 복사하세요!",copy:"복사",noDataFound:"백업 파일에서 복원할 데이터를 찾을 수 없습니다.",close:"닫기",scheduledBackup:"예약 백업",scheduledBackupDescription:"일정에 따라 백업 스냅샷을 자동으로 생성합니다. 출력 디렉토리를 NAS 또는 외부 저장소에 마운트할 수 있습니다.",frequency:"주기",backupTime:"시간",retention:"보존",retentionDescription:"유지할 백업 수",outputPath:"출력 경로",outputPathPlaceholder:"기본값: {{path}}",outputPathDescription:"기본 위치를 사용하려면 비워두세요",runNow:"지금 실행",backupFiles:"백업 파일",noScheduledBackups:"아직 백업 없음",deleteBackup:"삭제",deleteBackupConfirm:"이 백업 파일을 삭제하시겠습니까?",backupRunning:"백업 진행 중...",scheduledBackupComplete:"백업이 성공적으로 완료되었습니다",scheduledBackupFailed:"백업 실패",nextBackup:"다음 백업",backupSize:"크기",localTimeHint:"현지 시간 ({{tz}})",defaultPathLabel:"기본값:",categories:{settings:"설정",notification_providers:"알림 제공자",notification_templates:"알림 템플릿",smart_plugs:"스마트 플러그",printers:"프린터",filaments:"필라멘트",maintenance_types:"유지 관리 유형",archives:"아카이브",projects:"프로젝트",pending_uploads:"대기 중인 업로드",external_links:"외부 링크",api_keys:"API 키"},repoIsPrivate:"저장소가 비공개입니다 — 안전하게 백업할 수 있습니다.",repoIsPublicWarning:"저장소가 공개입니다. Bambuddy 백업에는 MQTT 자격증명, Home Assistant 토큰, Prometheus 토큰, Bambu Cloud 이메일, K-프로파일을 통한 프린터 액세스 코드가 포함됩니다. 공급자 설정에서 저장소를 비공개로 변경할 때까지 저장이 차단됩니다.",repoVisibilityUnknown:"저장소 공개 여부를 확인할 수 없습니다. Bambuddy는 비공개로 확인된 저장소에만 백업하며, 저장이 차단됩니다."},tags:{title:"태그",addTag:"태그 추가",editTag:"태그 편집",deleteTag:"태그 삭제",tagName:"태그 이름",tagColor:"태그 색상",noTags:"태그 없음",deleteConfirm:"이 태그를 삭제하시겠습니까?",manageTags:"태그 관리"},uploadModal:{title:"3MF 파일 업로드",dragDrop:".3mf 파일을 여기에 드래그 앤 드롭",or:"또는",browseFiles:"파일 탐색",extractionInfo:"프린터 모델은 3MF 파일 메타데이터에서 자동으로 추출됩니다.",uploaded:"업로드됨",failed:"실패",uploading:"업로드 중...",upload:"업로드",uploadFailed:"업로드 실패"},editArchive:{title:"아카이브 편집",name:"이름",namePlaceholder:"인쇄 이름",printer:"프린터",noPrinter:"프린터 없음",project:"프로젝트",noProject:"프로젝트 없음",itemsPrinted:"인쇄된 항목",itemsPrintedHelp:"이 인쇄 작업에서 생산된 항목 수",notes:"메모",notesPlaceholder:"이 인쇄에 대한 메모 추가...",externalLink:"외부 링크",externalLinkPlaceholder:"https://printables.com/model/...",externalLinkHelp:"Printables, Thingiverse 또는 다른 출처 링크",tags:"태그",tagsPlaceholder:"태그 추가...",addMoreTags:"더 많은 태그 추가...",matchingTags:'"{{query}}"와 일치',existingTags:"기존 태그",clickToAdd:"(클릭하여 추가)",status:"상태",failureReason:"실패 원인",selectReason:"원인 선택...",photos:"인쇄 결과 사진",photosHelp:"+를 클릭하여 인쇄 결과 사진 추가",printResult:"인쇄 결과",saving:"저장 중...",failureReasons:{adhesionFailure:"접착 실패",spaghettiDetached:"스파게티 / 분리",layerShift:"레이어 시프트",cloggedNozzle:"노즐 막힘",filamentRunout:"필라멘트 소진",warping:"휨",stringing:"스트링",underExtrusion:"압출 부족",powerFailure:"전원 실패",userCancelled:"사용자 취소",other:"기타"},statuses:{completed:"완료됨",failed:"실패",aborted:"취소됨",printing:"인쇄 중"}},kProfiles:{title:"K-프로필",noPrintersConfigured:"구성된 프린터 없음",addPrinterInSettings:"K-프로필을 관리하려면 설정에서 프린터를 추가하세요",noActivePrinters:"활성 프린터 없음",enablePrinterConnection:"K-프로필을 보려면 프린터 연결을 활성화하세요",loadingProfiles:"K-프로필 불러오는 중...",printerOffline:"프린터 오프라인",printerOfflineDesc:"선택한 프린터가 연결되지 않았습니다. 켜서 K-프로필을 확인하세요.",noMatchingProfiles:"일치하는 프로필 없음",noMatchingProfilesDesc:"검색 기준과 일치하는 프로필이 없습니다",noKProfiles:"K-프로필 없음",noKProfilesDesc:"{{diameter}}mm 노즐에 대한 압력 전진 프로필이 없습니다",createFirstProfile:"첫 번째 프로필 만들기",printer:"프린터",nozzle:"노즐",refresh:"새로고침",addProfile:"프로필 추가",export:"내보내기",import:"가져오기",select:"선택",selectAll:"모두 선택",delete:"삭제",searchPlaceholder:"이름 또는 필라멘트로 검색...",allExtruders:"모든 압출기",leftOnly:"왼쪽만",rightOnly:"오른쪽만",allFlow:"모든 유량",hfOnly:"HF만",sOnly:"S만",sortName:"정렬: 이름",sortKValue:"정렬: K값",sortFilament:"정렬: 필라멘트",leftExtruder:"왼쪽 압출기",rightExtruder:"오른쪽 압출기",modal:{addTitle:"K-프로필 추가",editTitle:"K-프로필 편집",profileName:"프로필 이름",profileNamePlaceholder:"내 PLA 프로필",kValue:"K값",kValuePlaceholder:"0.020",kValueHelp:"일반 범위: PLA 0.01~0.06, PETG 0.02~0.10",filament:"필라멘트",selectFilament:"필라멘트 선택...",noFilamentsHelp:"필라멘트를 찾을 수 없습니다. 먼저 Bambu Studio에서 K-프로필을 만드세요.",flowType:"유량 유형",highFlow:"고유량",standard:"표준",nozzleSize:"노즐 크기",extruder:"압출기",extruders:"압출기",left:"왼쪽",right:"오른쪽",notes:"메모 (로컬 저장)",notesPlaceholder:"이 프로필에 대한 메모 추가...",notesHelp:"메모는 프린터가 아닌 Bambuddy에 저장됩니다",syncing:"프린터와 동기화 중...",savingExtruder:"압출기 {{current}}/{{total}}에 저장 중...",pleaseWait:"기다려 주세요"},deleteConfirm:{title:"프로필 삭제",cannotUndo:"이 작업은 취소할 수 없습니다",message:'프린터에서 "{{name}}"을(를) 삭제하시겠습니까?'},bulkDelete:{title:"프로필 삭제",cannotUndo:"이 작업은 취소할 수 없습니다",message:"프린터에서 선택한 {{count}}개 프로필을 삭제하시겠습니까?"},toast:{profileSaved:"K-프로필 저장됨",profilesSaved:"{{count}}개 압출기에 K-프로필 저장됨",selectAtLeastOneExtruder:"적어도 하나의 압출기를 선택해 주세요",profileDeleted:"K-프로필 삭제됨",profilesDeleted:"{{count}}개 프로필 삭제됨",exportedProfiles:"{{count}}개 프로필 내보냄",importedProfiles:"{{total}}개 중 {{count}}개 프로필 가져옴",noProfilesToExport:"내보낼 프로필 없음",invalidFileFormat:"유효하지 않은 파일 형식",failedToParseImport:"가져오기 파일 파싱 실패",failedToSaveBatch:"K-프로필 저장 실패",noteSaved:"메모 저장됨",failedToSaveNote:"메모 저장 실패"},permission:{noRead:"프로필 새로고침 권한이 없습니다",noCreate:"프로필 추가 권한이 없습니다",noUpdate:"K-프로필 업데이트 권한이 없습니다",noDelete:"K-프로필 삭제 권한이 없습니다",noExport:"프로필 내보내기 권한이 없습니다",noImport:"프로필 가져오기 권한이 없습니다"}},virtualPrinter:{title:"가상 프린터",running:"실행 중",stopped:"중지됨",description:{default:"Bambu Studio 및 OrcaSlicer에 표시되는 가상 프린터를 활성화합니다. 이 프린터로 전송된 파일은 인쇄 없이 바로 아카이브됩니다.",proxy:"실제 프린터로 슬라이서 트래픽을 릴레이하는 프록시를 활성화하여 모든 네트워크에서 원격 인쇄가 가능합니다."},enable:{title:"가상 프린터 활성화",visibleInSlicer:'슬라이서 검색에서 "Bambuddy"로 표시됨',proxyingTo:"{{name}}으로 프록시 중",notActive:"활성화되지 않음"},model:{title:"프린터 모델",description:"에뮬레이션할 프린터 모델을 선택하세요.",restartWarning:"모델 변경 시 가상 프린터가 재시작됩니다"},accessCode:{title:"액세스 코드",isSet:"액세스 코드가 설정됨",notSet:"액세스 코드가 설정되지 않음 - 활성화하려면 필요",placeholder:"8자리 코드 입력",placeholderChange:"변경하려면 새 코드 입력",hint:"정확히 8자여야 합니다. 슬라이서가 인증하는 데 사용됩니다.",charCount:"({{count}}/8)"},targetPrinter:{title:"대상 프린터",configured:"프록시 대상 구성됨",notConfigured:"대상 프린터가 선택되지 않음 - 프록시 모드에 필요",placeholder:"프린터 선택...",hint:"슬라이서 트래픽을 프록시할 프린터를 선택하세요. 프린터는 LAN 모드여야 합니다.",noPrinters:"구성된 프린터 없음. 프록시 모드를 사용하려면 먼저 프린터를 추가하세요."},remoteInterface:{title:"네트워크 인터페이스 재정의",configured:"인터페이스 재정의 활성",optional:"선택사항 - 자동 감지된 IP가 잘못된 경우 사용 (예: 여러 NIC, Docker, VPN)",placeholder:"자동 감지 (기본값)...",hint:"SSDP를 통해 광고되고 TLS 인증서에 사용되는 IP 주소를 재정의합니다. Bambuddy에 여러 네트워크 인터페이스가 있을 때 유용합니다."},mode:{title:"모드",archive:"아카이브",archiveDesc:"파일 즉시 아카이브",review:"검토",reviewDesc:"아카이브 전 검토",queue:"대기열",queueDesc:"아카이브 후 대기열 추가",proxy:"프록시",proxyDesc:"실제 프린터로 릴레이"},autoDispatch:{title:"자동 발송",description:"대기열에 추가될 때 자동으로 인쇄를 시작합니다. 꺼져 있으면 수동 발송을 기다립니다."},queueForceColorMatch:{title:"색상 일치 강제",description:"정확한 필라멘트 유형과 색상이 장착되지 않은 프린터에는 발송을 거부합니다. 기본적으로 꺼져 있음 — 이 옵션 없이는 대기열이 모델 전용 매칭을 사용하여 잘못된 색상이 장착된 프린터를 선택할 수 있습니다."},tailscaleDisabled:{title:"Tailscale 통합",description:"이 가상 프린터가 Tailscale을 통해 노출되도록 표시하려면 활성화하세요. 슬라이서에 붙여넣을 IP를 알 수 있도록 호스트의 Tailscale 주소를 표시합니다. CA 가져오기 단계는 변경되지 않음 — 이 토글은 인증서에 영향을 미치지 않습니다."},setupRequired:{title:"설정 필요",description:"가상 프린터 기능이 작동하려면 추가 시스템 구성이 필요합니다. 여기에는 포트 포워딩, 방화벽 규칙 및 플랫폼별 설정이 포함됩니다.",readGuide:"활성화 전에 설정 가이드를 읽으세요"},archiveNameSource:{title:"아카이브 이름 출처",description:'가상 프린터를 통해 파일이 도착할 때 새 아카이브의 이름 지정 방법을 선택합니다. "메타데이터"는 3MF의 슬라이서 내장 제목을 사용합니다(기본값). "파일 이름"은 Bambu Studio가 FTP를 통해 전송한 파일 이름을 사용합니다.',metadata:"메타데이터",filename:"파일 이름"},howItWorks:{title:"작동 방식",step1:"같은 LAN에서 가상 프린터는 검색을 통해 슬라이서(Bambu Studio / OrcaSlicer)에 자동으로 나타납니다. 다른 네트워크에서는 IP 주소와 액세스 코드로 수동으로 추가하세요.",step2:'아카이브, 검토, 대기열 모드에서 슬라이서의 "전송" 버튼을 사용하여 3MF 파일을 Bambuddy에 업로드하세요. 슬라이서는 "인쇄 성공"을 표시하지만 파일은 저장되고 인쇄되지 않습니다.',step3:"프록시 모드에서 가상 프린터는 모든 트래픽을 실제 프린터로 릴레이합니다 — 직접 연결된 것처럼 즉시 인쇄가 시작됩니다."},status:{title:"상태 세부 정보",printerName:"프린터 이름",model:"모델",serialNumber:"일련 번호",mode:"모드",pendingFiles:"대기 중인 파일",targetPrinter:"대상 프린터",ftpPort:"FTP 포트",mqttPort:"MQTT 포트",ftpConnections:"FTP 연결",mqttConnections:"MQTT 연결"},toast:{updated:"가상 프린터 설정 업데이트됨",failedToUpdate:"설정 업데이트 실패",copyFailed:"복사 실패 — 텍스트를 수동으로 선택하여 복사해 보세요",accessCodeRequired:"먼저 액세스 코드를 설정해 주세요",targetPrinterRequired:"먼저 대상 프린터를 선택해 주세요",bindIpRequired:"먼저 바인드 IP를 설정해 주세요",accessCodeEmpty:"액세스 코드는 비워둘 수 없습니다",accessCodeLength:"액세스 코드는 정확히 8자여야 합니다",created:"가상 프린터 생성됨",failedToCreate:"가상 프린터 생성 실패",deleted:"가상 프린터 삭제됨",failedToDelete:"가상 프린터 삭제 실패"},list:{title:"가상 프린터",add:"추가",addFirst:"가상 프린터 추가",empty:"구성된 가상 프린터 없음. 하나를 추가하여 시작하세요."},bindIp:{title:"바인드 인터페이스",placeholder:"인터페이스 선택...",hint:"이 가상 프린터가 바인딩할 네트워크 인터페이스. 프린터당 고유해야 합니다."},proxy:{accessCodeHint:"프록시 모드에서는 슬라이서에서 대상 프린터의 액세스 코드를 사용하세요. 연결은 실제 프린터로 투명하게 전달됩니다."},addDialog:{title:"가상 프린터 추가",name:"이름",hint:"생성 후 액세스 코드, 대상 프린터 및 기타 설정을 구성할 수 있습니다.",create:"생성"},deleteConfirm:{title:"가상 프린터 삭제",message:'"{{name}}"을(를) 삭제하시겠습니까? 이 프린터의 모든 서비스가 중지됩니다.'},caCert:{title:"슬라이서 인증서",description:"가상 프린터는 Bambuddy CA가 서명한 TLS 인증서를 사용합니다. 이 CA 인증서를 슬라이서의 신뢰 저장소에 한 번만 가져오면 연결을 수락합니다 — 명령줄에서 복사할 필요가 없습니다.",copy:"복사",copied:"복사됨",download:"다운로드",fingerprint:"SHA-256"}},modelViewer:{openInSlicer:"슬라이서에서 열기",tabs:{model:"3D 모델",gcode:"G-code 미리보기"},notAvailable:"사용 불가",notSliced:"슬라이싱되지 않음",plates:"플레이트",allPlates:"모든 플레이트",plateNumber:"플레이트 {{number}}",plateCount:"플레이트 {{count}}개",plateCount_other:"플레이트 {{count}}개",objectCount:"개체 {{count}}개",objectCount_other:"개체 {{count}}개",filamentCount:"필라멘트 {{count}}개",filamentCount_other:"필라멘트 {{count}}개",eta:"예상 {{minutes}}분",noPreview:"이 파일에 대한 미리보기를 사용할 수 없습니다",pagination:{pageOf:"{{total}}페이지 중 {{current}}",prev:"이전",next:"다음"},errors:{failedToLoad:"파일 불러오기 실패",noMeshes:"3MF 파일에서 메쉬를 찾을 수 없음",unsupportedFormat:"지원되지 않는 파일 형식"}},maintenanceDescriptions:{lubricateCarbonRods:"부드러운 움직임을 위해 카본 로드에 윤활유 도포",lubricateRails:"부드러운 움직임을 위해 선형 레일에 윤활유 도포",cleanNozzle:"막힘 방지를 위해 핫엔드와 노즐 청소",checkBelts:"정확한 인쇄를 위해 벨트 장력 확인",cleanBuildPlate:"접착력 향상을 위해 빌드 플레이트 청소",checkExtruder:"마모 여부 확인을 위해 압출기 기어 점검",checkCooling:"냉각 팬이 제대로 작동하는지 확인",generalInspection:"전반적인 프린터 점검",cleanCarbonRods:"마찰 감소를 위해 카본 로드 청소",lubricateSteelRods:"부드러운 움직임을 위해 스틸 로드에 윤활유 도포",cleanSteelRods:"마찰 감소를 위해 스틸 로드 청소",cleanLinearRails:"먼지와 이물질 제거를 위해 선형 레일 닦기",checkPtfeTube:"마모 또는 손상 여부 확인을 위해 PTFE 튜브 점검",replaceHepaFilter:"공기 품질을 위해 HEPA 필터 교체",replaceCarbonFilter:"활성탄 필터 교체",lubricateLeftNozzleRail:"왼쪽 노즐 레일 윤활 (H2 시리즈)"},smartPlugs:{offline:"오프라인",admin:"관리자",openPlugAdminPage:"플러그 관리 페이지 열기",deleteSmartPlug:"스마트 플러그 삭제",turnOnSmartPlug:"스마트 플러그 켜기",turnOffSmartPlug:"스마트 플러그 끄기",turnOn:"켜기",turnOff:"끄기",addSmartPlug:{scanningNetwork:"네트워크 스캔 중...",chooseEntity:"엔티티 선택...",connectionFailed:"연결 실패",searchEntities:"엔티티 검색...",searchPowerSensors:"전력 센서 검색...",searchEnergySensors:"에너지 센서 검색...",placeholders:{plugName:"거실 플러그",mqttStateOnValue:"ON, true, 1",mqttSameAsPower:"전력 토픽과 같거나 다름"}},linkedTo:"연결됨:",monitorOnly:"모니터만",alerts:"알림",scheduleOn:"켜기 {{time}}",scheduleOff:"끄기 {{time}}",on:"켜짐",off:"꺼짐",power:"전력",kwhToday:"오늘 kWh",settings:"설정",automationSettings:"자동화 설정",showInSwitchbar:"스위치바에 표시",quickAccessSidebar:"사이드바에서 빠른 접근",enabled:"활성화됨",enableAutomation:"이 플러그의 자동화 활성화",autoOn:"자동 켜기",autoOnDescription:"인쇄 시작 시 켜기",autoOff:"자동 끄기",autoOffDescription:"인쇄 완료 시 끄기 (1회)",autoOffPersistent:"계속 활성화",autoOffPersistentDescription:"1회성 대신 인쇄 사이에 활성화 유지",turnOffDelayMode:"끄기 지연 모드",time:"시간",temp:"온도",delayMinutes:"지연 (분)",tempThreshold:"온도 임계값 (°C)",tempThresholdDescription:"노즐이 이 온도 이하로 냉각될 때 끄기",edit:"편집",deleteConfirm:'"{{name}}"을(를) 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.',turnOnConfirm:'"{{name}}"을(를) 켜시겠습니까?',turnOffConfirm:'"{{name}}"을(를) 끄시겠습니까? 연결된 장치의 전원이 차단됩니다.',failedToTurn:'"{{name}}" {{action}} 실패',unknown:"알 수 없음",addTitle:"스마트 플러그 추가",editTitle:"스마트 플러그 편집",stopScanning:"스캔 중지",discoverTasmota:"Tasmota 장치 검색",foundDevices:"{{count}}개 장치 발견 - 클릭하여 선택:",noDevicesFound:"네트워크에서 Tasmota 장치를 찾을 수 없음",haNotConfigured:"Home Assistant가 구성되지 않았습니다.",haSettingsPath:"설정 → 네트워크 → Home Assistant",selectEntity:"엔티티 선택 *",ipAddress:"IP 주소 *",nameLabel:"이름 *",username:"사용자 이름",password:"비밀번호",authHint:"Tasmota 장치에 인증이 필요하지 않으면 비워두세요",linkToPrinter:"프린터에 연결",noPrinter:"프린터 없음 (수동 제어만)",linkingDescription:"연결하면 인쇄 시작/완료 시 자동 켜기/끄기가 활성화됩니다",powerAlerts:"전력 알림",alertAbove:"초과 시 알림 (W)",alertBelow:"미만 시 알림 (W)",alertDescription:"전력 소비가 이 임계값을 초과할 때 알림 받기. 해당 방향을 비활성화하려면 비워두세요.",dailySchedule:"일일 스케줄",turnOnAt:"켜기 시각",turnOffAt:"끄기 시각",scheduleDescription:"매일 이 시간에 자동으로 켜기/끄기. 해당 동작을 건너뛰려면 비워두세요.",showOnPrinterCard:"프린터 카드에 표시",displayOnPrinterCard:"프린터 카드에 버튼 표시",connectedResult:"연결됨!",deviceLabel:"장치: {{name}} - ",stateLabel:"상태: {{state}}",test:"테스트",delete:"삭제",save:"저장",add:"추가",cancel:"취소",failedToStartScan:"스캔 시작 실패",nameRequired:"이름이 필요합니다",entityRequired:"Home Assistant 플러그에는 엔티티가 필요합니다",mqttTopicRequired:"전력, 에너지 또는 상태 모니터링을 위한 MQTT 토픽이 하나 이상 구성되어야 합니다",loadingEntities:"엔티티 불러오는 중...",loading:"불러오는 중...",failedToLoadEntities:"엔티티 불러오기 실패: {{error}}",noEntitiesMatching:'"{{search}}"과 일치하는 엔티티를 찾을 수 없음',noEntitiesAvailable:"사용 가능한 엔티티 없음",searchingEntities:"모든 엔티티 검색 중 ({{count}}개 발견)",showingEntities:"switch, light, input_boolean 표시 중 ({{count}}개 사용 가능)",energyMonitoringOptional:"에너지 모니터링 (선택사항)",energyMonitoringHint:"전력/에너지 데이터를 제공하는 센서를 검색하여 선택하세요.",powerSensorW:"전력 센서 (W)",energyTodayKwh:"오늘 에너지 (kWh)",totalEnergyKwh:"총 에너지 (kWh)",noMatchingSensors:"일치하는 센서 없음",none:"없음",mqttNotConfigured:"MQTT 브로커가 구성되지 않았습니다.",mqttSettingsPath:"설정 → 네트워크 → MQTT 게시",mqttNotConfiguredSuffix:"(게시를 활성화할 필요는 없고 브로커 세부 정보만 입력하면 됩니다).",mqttMonitorOnlyDescription:"MQTT 플러그는 MQTT 구독을 통해 전력/에너지 데이터를 받습니다. 켜기/끄기 제어는 불가능 — MQTT 브로커나 홈 자동화 시스템을 사용하세요.",powerMonitoring:"전력 모니터링",energyMonitoring:"에너지 모니터링",stateMonitoring:"상태 모니터링",optional:"선택사항",topic:"토픽",jsonPath:"JSON 경로",multiplier:"배수",onValue:"ON 값",mqttPowerHint:`JSON 경로는 JSON 페이로드에서 값을 추출합니다 (예: "power_l1"). 토픽이 원시 숫자 값을 게시하면 비워두세요.
 mW→W에는 배수 0.001, kW→W에는 1000을 사용하세요.`,mqttEnergyHint:`JSON 경로는 JSON 페이로드에서 값을 추출합니다. 원시 값에는 비워두세요.
 Wh→kWh에는 배수 0.001, MWh→kWh에는 1000을 사용하세요.`,mqttStateHint:`JSON 경로는 JSON 페이로드에서 값을 추출합니다. 원시 값에는 비워두세요.
-ON 값: "ON"을 의미하는 정확한 문자열. 자동 감지(ON, true, 1)를 위해 비워두세요.`,restControl:"제어",restOnUrl:"켜기 URL",restOffUrl:"끄기 URL",restOnBody:"ON 요청 본문",restOffBody:"OFF 요청 본문",restMethod:"HTTP 방법",restHeaders:"사용자 지정 헤더 (JSON)",restStatusUrl:"상태 URL",restStatusPath:"상태 JSON 경로",restStatusOnValue:"ON 값",restPowerUrl:"전력 URL",restPowerPath:"전력 JSON 경로",restPowerMultiplier:"전력 배수",restEnergyUrl:"에너지 URL",restEnergyPath:"에너지 JSON 경로",restEnergyMultiplier:"에너지 배수",restUrlRequired:"REST 플러그에는 URL(ON 또는 OFF) 중 하나 이상이 필요합니다",restHeadersHint:'예: {"Authorization": "Bearer your-token"}',restBodyHint:'예: ON, {"state": "on"}',restStatusHint:"현재 상태를 폴링할 URL",restPathHint:"예: state 또는 data.power.status",restPowerUrlHint:"전력 데이터의 별도 URL (비어 있으면 상태 URL 사용)",restEnergyUrlHint:"에너지 데이터의 별도 URL (비어 있으면 상태 URL 사용)",restEnergyHint:"각 값은 자체 URL을 사용하거나 상태 URL로 대체할 수 있습니다. 단위 변환에 배수를 사용하세요 (예: Wh→kWh에 0.001).",testConnection:"연결 테스트",connectionSuccess:"연결 성공",noSwitchesInSwitchbar:"스위치바에 스위치 없음",enableSwitchbarHint:'설정 > 스마트 플러그에서 "스위치바에 표시"를 활성화하세요',autoOffAfterDrying:"건조 후 자동 끄기",autoOffAfterDryingDescription:"AMS 건조가 완료되면 끄기",delayAfterDryingMinutes:"건조 후 지연 (분)"},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"이메일",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"SMTP 이메일 알림",telegram:"Telegram 봇을 통한 알림",discord:"Webhook을 통해 Discord 채널로 전송",ntfy:"무료, 자체 호스팅 가능한 푸시 알림",pushover:"간단하고 신뢰할 수 있는 푸시 알림",callmebot:"CallMeBot을 통한 무료 WhatsApp 알림",webhook:"모든 URL에 일반 HTTP POST",homeassistant:"Home Assistant 대시보드의 지속적인 알림"},lastSuccess:"마지막: {{date}}",error:"오류",printer:"프린터:",allPrinters:"모든 프린터",sendTestNotification:"테스트 알림 전송",eventSettings:"이벤트 설정",enabled:"활성화됨",sendFromProvider:"이 제공자에서 알림 전송",printEvents:"인쇄 이벤트",printerStatus:"프린터 상태",amsAlarms:"AMS 알람",amsHtAlarms:"AMS-HT 알람",printQueue:"인쇄 대기열",start:"시작",plateCheck:"플레이트 확인",complete:"완료",failed:"실패",stopped:"중지됨",progress:"진행률",offline:"오프라인",lowFilament:"필라멘트 부족",maintenance:"유지 관리",amsHumidity:"AMS 습도",amsTemp:"AMS 온도",amsHtHumidity:"AMS-HT 습도",amsHtTemp:"AMS-HT 온도",bedCooled:"베드 냉각됨",firstLayer:"첫 번째 레이어",quiet:"방해 금지",digest:"요약 {{time}}",printStarted:"인쇄 시작됨",plateNotEmpty:"플레이트 비어 있지 않음",plateNotEmptyDescription:"인쇄 전 개체 감지됨",printCompleted:"인쇄 완료됨",bedCooledLabel:"베드 냉각됨",bedCooledDescription:"인쇄 후 베드가 임계값 이하로 냉각됨",firstLayerCompleteLabel:"첫 번째 레이어 완료",firstLayerCompleteDescription:"첫 번째 레이어 완료 시 스냅샷과 함께 알림",missingSpoolAssignmentLabel:"스풀 할당 누락",missingSpoolAssignmentDescription:"인쇄 시작 시 필요한 트레이에 할당된 스풀이 없을 때 알림",printFailed:"인쇄 실패",printStopped:"인쇄 중지됨",progressMilestones:"진행률 이정표",progressMilestonesDescription:"25%, 50%, 75%에서 알림",printerOffline:"프린터 오프라인",printerError:"프린터 오류",lowFilamentLabel:"필라멘트 부족",maintenanceDue:"유지 관리 필요",maintenanceDueDescription:"유지 관리가 필요할 때 알림",amsHumidityHigh:"AMS 습도 높음",amsHumidityHighDescription:"일반 AMS 습도가 임계값 초과",amsTemperatureHigh:"AMS 온도 높음",amsTemperatureHighDescription:"일반 AMS 온도가 임계값 초과",amsHtHumidityHigh:"AMS-HT 습도 높음",amsHtHumidityHighDescription:"AMS-HT 습도가 임계값 초과",amsHtTemperatureHigh:"AMS-HT 온도 높음",amsHtTemperatureHighDescription:"AMS-HT 온도가 임계값 초과",inventoryAlerts:"재고 알림",stockReorderAlert:"재주문 알림",stockReorderAlertDescription:"SKU가 재주문 시점에 도달함",stockBreakAlert:"재고 소진 알림",stockBreakAlertDescription:"보충 전에 재고가 소진될 것임",jobAdded:"작업 추가됨",jobAddedDescription:"대기열에 작업 추가됨",jobAssigned:"작업 할당됨",jobAssignedDescription:"모델 기반 작업이 프린터에 할당됨",jobStarted:"작업 시작됨",jobStartedDescription:"대기열 작업 인쇄 시작됨",jobWaiting:"작업 대기 중",jobWaitingDescription:"필라멘트 또는 프린터를 기다리는 작업",jobSkipped:"작업 건너뜀",jobSkippedDescription:"작업 건너뜀 (이전 실패)",jobFailed:"작업 실패",jobFailedDescription:"작업 시작 실패",queueComplete:"대기열 완료",queueCompleteDescription:"모든 대기열 작업 완료",quietHours:"방해 금지 시간",noNotificationsDuring:"이 시간 동안 알림 없음",editProviderToChangeQuietHours:"방해 금지 시간을 변경하려면 제공자를 편집하세요",dailyDigest:"일일 요약",batchNotifications:"알림을 하나의 일일 요약으로 묶기",sendAt:"{{time}}에 전송",editProviderToChangeDigestTime:"요약 시간을 변경하려면 제공자를 편집하세요",edit:"편집",deleteProvider:"알림 제공자 삭제",deleteConfirm:'"{{name}}"을(를) 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.',delete:"삭제",addTitle:"알림 제공자 추가",editTitle:"알림 제공자 편집",nameLabel:"이름 *",namePlaceholder:"내 알림",providerTypeLabel:"제공자 유형 *",configuration:"구성",testConfiguration:"구성 테스트",printerFilter:"프린터 필터",onlyFromPrinter:"이 프린터의 이벤트에 대한 알림만 전송",quietHoursDnd:"방해 금지 시간",quietStart:"시작",quietEnd:"종료",dailyDigestLabel:"일일 요약",sendDigestAt:"요약 전송 시각",digestCollected:"이벤트가 수집되어 이 시간에 하나의 요약으로 전송됩니다",notificationEvents:"알림 이벤트",progressPercent:"(25%, 50%, 75%)",bedCooledAfterPrint:"(인쇄 완료 후)",eventPriority:{sectionTitle:"ntfy 우선순위",helpNtfy:"각 활성화된 이벤트에 대한 우선순위를 선택하세요. ntfy는 이를 사용하여 알림을 에스컬레이션합니다(소리, 가시성, 푸시 동작). 여기서 설정되지 않은 수준은 ntfy 서버 기본값을 사용합니다.",min:"최소",low:"낮음",default:"기본값",high:"높음",urgent:"긴급"},cancel:"취소",save:"저장",add:"추가",nameRequired:"이름이 필요합니다",fieldRequired:"{{field}}이(가) 필요합니다",phoneNumber:"전화번호",apiKey:"API 키",serverUrl:"서버 URL",topic:"토픽",authToken:"인증 토큰",userKey:"사용자 키",appToken:"앱 토큰",priority:"우선순위",botToken:"봇 토큰",chatId:"채팅 ID",smtpServer:"SMTP 서버",smtpPort:"SMTP 포트",security:"보안",authentication:"인증",username:"사용자 이름",password:"비밀번호",fromEmail:"발신 이메일",toEmail:"수신 이메일",webhookUrl:"Webhook URL",payloadFormat:"페이로드 형식",authorization:"인증",titleFieldName:"제목 필드 이름",messageFieldName:"메시지 필드 이름",editTemplate:"템플릿 편집: {{name}}",titleLabel:"제목",bodyLabel:"본문",titlePlaceholder:"알림 제목...",bodyPlaceholder:"알림 본문...",availableVariables:"사용 가능한 변수",clickToInsert:"클릭하여 본문의 커서 위치에 삽입",livePreview:"실시간 미리보기",hide:"숨기기",show:"표시",loadingPreview:"미리보기 불러오는 중...",enterTemplateContent:"미리보기를 보려면 템플릿 내용을 입력하세요",titlePreview:"제목:",bodyPreview:"본문:",resetToDefault:"기본값으로 초기화",titleRequired:"제목이 필요합니다",bodyRequired:"본문이 필요합니다",notificationLog:"알림 로그",showFailedOnly:"실패만",last24Hours:"최근 24시간",last7Days:"최근 7일",last30Days:"최근 30일",last90Days:"최근 90일",justNow:"방금",noFailedNotifications:"실패한 알림 없음",noNotificationsLogged:"기록된 알림 없음",unknownProvider:"알 수 없는 제공자",logTitle:"제목",logMessage:"메시지",logError:"오류",logProvider:"제공자: {{type}}",logTime:"시간: {{time}}",refresh:"새로고침",clearOld:"오래된 것 삭제",statsSummary:"최근 {{days}}일:",statsNotifications:"알림",statsSent:"{{count}}개 전송됨",statsFailed:"{{count}}개 실패",eventTypes:{print_start:"인쇄 시작됨",print_complete:"인쇄 완료",print_failed:"인쇄 실패",print_stopped:"인쇄 중지됨",print_progress:"진행률",printer_offline:"프린터 오프라인",printer_error:"프린터 오류",filament_low:"필라멘트 부족",maintenance_due:"유지 관리 필요",test:"테스트"},userEmail:{title:"알림",emailNotifications:"이메일 알림",emailNotificationsDesc:"내 인쇄 작업에 대한 이메일 알림을 받습니다. 이메일은 고급 인증에서 구성된 시스템 SMTP 설정을 사용하여 전송됩니다.",sendingTo:"알림이 전송될 주소",noEmailWarning:"계정에 이메일 주소가 없습니다. 관리자에게 연락하여 추가하세요.",printJobNotifications:"인쇄 작업 알림",printJobNotificationsDesc:"내가 제출한 인쇄 작업에 대해 이메일 알림을 트리거할 이벤트를 선택하세요.",printJobStarts:"인쇄 작업 시작",printJobStartsDesc:"인쇄 작업이 시작될 때 알림 받기.",printJobFinishes:"인쇄 작업 완료",printJobFinishesDesc:"인쇄 작업이 성공적으로 완료될 때 알림 받기.",printErrors:"인쇄 오류",printErrorsDesc:"인쇄 작업이 실패하거나 오류가 발생할 때 알림 받기.",printJobStops:"인쇄 작업 중지",printJobStopsDesc:"인쇄 작업이 취소되거나 중지될 때 알림 받기.",saveSuccess:"알림 환경 설정이 저장되었습니다.",saveError:"알림 환경 설정 저장 실패."}},richTextEditor:{bold:"굵게",italic:"기울임",underline:"밑줄",bulletList:"글머리 기호 목록",numberedList:"번호 목록",alignLeft:"왼쪽 정렬",alignCenter:"가운데 정렬",alignRight:"오른쪽 정렬",addLink:"링크 추가",removeLink:"링크 제거"},externalLinks:{noLinksConfigured:"구성된 외부 링크 없음",deleteLink:"링크 삭제",removeCustomIcon:"사용자 지정 아이콘 제거",openInNewTab:"새 탭에서 열기",placeholders:{linkName:"내 링크"}},keyboardShortcuts:{title:"키보드 단축키",navigation:"탐색",archivesSection:"아카이브",kProfilesSection:"K-프로필",generalSection:"일반",shortcuts:{goToPrinters:"프린터로 이동",goToArchives:"아카이브로 이동",goToQueue:"대기열로 이동",goToStats:"통계로 이동",goToProfiles:"클라우드 프로필로 이동",goToSettings:"설정으로 이동",focusSearch:"검색 포커스",openUploadModal:"업로드 모달 열기",clearSelection:"선택 초기화 / 입력 포커스 해제",contextMenu:"카드 컨텍스트 메뉴",refreshProfiles:"프로필 새로고침",newProfile:"새 프로필",exitSelectionMode:"선택 모드 종료",showHelp:"이 도움말 표시"},footer:"Esc를 누르거나 외부를 클릭하여 닫기"},notificationLog:{title:"알림 로그",events:{printStarted:"인쇄 시작됨",printComplete:"인쇄 완료",printFailed:"인쇄 실패",printStopped:"인쇄 중지됨",progress:"진행률",printerOffline:"프린터 오프라인",printerError:"프린터 오류",lowFilament:"필라멘트 부족",maintenanceDue:"유지 관리 필요",test:"테스트"},timeAgo:{justNow:"방금",minutesAgo:"{{minutes}}분 전",hoursAgo:"{{hours}}시간 전"}},restoreBackup:{title:"백업 복원",restoring:"복원 중...",restoreComplete:"복원 완료",restoreFailed:"복원 실패",importSettings:"백업 파일에서 설정 가져오기",pleaseWait:"데이터가 복원되는 동안 기다려 주세요",clickToSelect:"백업 파일 클릭하여 선택 (.json 또는 .zip)",howDuplicateHandling:"중복 처리 방법:",categories:{printers:"프린터",smartPlugs:"스마트 플러그",notificationProviders:"알림 제공자",filaments:"필라멘트",archives:"아카이브",pendingUploads:"대기 중인 업로드",settingsTemplates:"설정 및 템플릿"},matchingInfo:{printers:"일련번호로 일치",smartPlugs:"IP 주소로 일치",notificationProviders:"이름으로 일치",filaments:"이름 + 유형 + 브랜드로 일치",archives:"콘텐츠 해시로 일치",pendingUploads:"파일 이름으로 일치",settingsTemplates:"항상 덮어씀"},replaceExisting:"기존 데이터 교체",keepExisting:"기존 데이터 유지",replaceDescription:"백업 데이터로 이미 존재하는 항목 덮어쓰기",keepDescription:"아직 존재하지 않는 항목만 복원",caution:"주의:",cautionText:"덮어쓰기는 현재 구성을 백업 데이터로 교체합니다. 보안상 프린터 액세스 코드는 절대 덮어쓰지 않습니다.",itemsRestored:"복원된 항목",itemsSkipped:"건너뛴 항목",restored:"복원됨",skipped:"건너뜀 (이미 존재)",filesLabel:"파일 (3MF, 썸네일 등)",newApiKeysGenerated:"새 API 키 생성됨",newApiKeysWarning:"이 키는 한 번만 표시됩니다. 지금 복사하세요!",processingBackup:"백업 파일 처리 중...",noDataFound:"백업 파일에서 복원할 데이터를 찾을 수 없습니다.",failedToRestore:"백업 복원 실패. 파일 형식을 확인하세요."},backupExport:{title:"백업 내보내기",selectData:"포함할 데이터 선택",selectAll:"모두 선택",selectNone:"선택 없음",categoryDescriptions:{settings:"언어, 테마, 업데이트 환경 설정",notifications:"ntfy, Pushover, Discord 등",templates:"사용자 지정 메시지 템플릿",smartPlugs:"Tasmota 플러그 구성",externalLinks:"외부 서비스에 대한 사이드바 링크",printers:"프린터 정보 (액세스 코드 제외)",plateDetection:"빈 플레이트 기준 이미지",filaments:"필라멘트 유형 및 비용",maintenance:"사용자 지정 유지 관리 일정",archives:"모든 인쇄 데이터 + 파일 (3MF, 썸네일, 사진)",projects:"프로젝트, BOM 항목 및 첨부 파일",pendingUploads:"검토 대기 중인 가상 프린터 업로드",apiKeys:"Webhook API 키 (가져오기 시 새 키 생성)"},requiresPrinters:"프린터 선택 필요",zipFileWarning:"ZIP 파일이 생성됩니다.",zipFileDescription:"모든 3MF 파일, 썸네일, 타임랩스 및 사진을 포함합니다. 시간이 걸리고 파일이 커질 수 있습니다.",includeAccessCodes:"액세스 코드 포함",includeAccessCodesDescription:"다른 기기로 전송하는 경우",includeAccessCodesWarning:"액세스 코드가 평문으로 포함됩니다. 이 백업 파일을 안전하게 보관하세요!",categoriesSelected:"{{selectedCount}}개 카테고리 선택됨"},pendingUploads:{placeholders:{notes:"이 인쇄에 대한 메모 추가..."},discardUpload:"업로드 삭제",archiveAllUploads:"모든 업로드 아카이브",discardAllUploads:"모든 업로드 삭제",archive:"아카이브",timeAgo:{justNow:"방금",minutesAgo:"{{minutes}}분 전",hoursAgo:"{{hours}}시간 전",daysAgo:"{{days}}일 전"}},apiBrowser:{placeholders:{requestBody:"JSON 요청 본문...",searchEndpoints:"엔드포인트 검색..."}},configureAmsSlot:{title:"AMS 슬롯 구성",slotConfigured:"슬롯 구성됨!",configuringSlot:"슬롯 구성 중:",slotLabel:"{{ams}} 슬롯 {{slot}}",searchPresets:"프리셋 검색...",colorPlaceholder:"색상 이름 또는 16진수 (예: brown, FF8800)",clearCustomColor:"사용자 지정 색상 초기화",noCloudPresets:"클라우드 프리셋 없음. Bambu 클라우드에 로그인하여 동기화하세요.",noPresetsAvailable:"사용 가능한 프리셋 없음. Bambu 클라우드에 로그인하거나 로컬 프로필을 가져오세요.",noMatchingPresets:"일치하는 프리셋을 찾을 수 없습니다.",custom:"사용자 지정",builtin:"기본 제공",settingsSentToPrinter:"설정이 프린터로 전송됨",filamentProfile:"필라멘트 프로필",kProfileLabel:"K 프로필 (압력 전진)",filteringFor:"필터링 중: {{material}}",noKProfile:"K 프로필 없음 (기본값 0.020 사용)",noMatchingKProfiles:"일치하는 K 프로필을 찾을 수 없습니다. 기본값 K=0.020이 사용됩니다.",selectFilamentFirst:"먼저 필라멘트 프로필을 선택하세요",kFromCalibration:"K={{value}} (프린터 보정에서)",customColorLabel:"사용자 지정 색상 (선택사항)",presetColors:"{{name}} 색상:",showLessColors:"색상 간략히 보기",showMoreColors:"더 많은 색상 보기",clear:"초기화",hexLabel:"16진수: #{{hex}}",resetting:"초기화 중...",resetSlot:"슬롯 초기화",cancel:"취소",configuring:"구성 중...",configureSlot:"슬롯 구성"},githubBackup:{title:"Git 백업",history:"기록",downloadBackup:"백업 다운로드",restoreBackup:"백업 복원",noBackupsYet:"아직 백업 없음"},emailSettings:{placeholders:{fromName:"Bambuddy"}},tagManagement:{searchTags:"태그 검색...",renameTag:"태그 이름 바꾸기",deleteTag:"태그 삭제"},notificationTemplates:{placeholders:{title:"알림 제목...",body:"알림 본문..."}},batchTag:{placeholders:{newTag:"새 태그 입력..."}},photoGallery:{deletePhoto:"사진 삭제"},filamentHoverCard:{copySpoolUuid:"스풀 UUID 복사"},kProfilesView:{hasNote:"메모 있음",copyProfile:"프로필 복사"},layout:{openMenu:"메뉴 열기",noPermissionSystemInfo:"시스템 정보를 볼 권한이 없습니다"},dashboard:{dragToReorder:"드래그하여 순서 변경",hideWidget:"위젯 숨기기"},notificationProviderCard:{deleteNotificationProvider:"알림 제공자 삭제"},fileManagerModal:{closeFileManager:"파일 관리자 닫기",sortFiles:"파일 정렬",goToParentFolder:"상위 폴더로 이동",threeView:"3D 보기"},embeddedCameraViewer:{refreshStream:"스트림 새로고침",close:"닫기",zoomOut:"축소",resetZoom:"배율 초기화",zoomIn:"확대",dragToResize:"드래그하여 크기 조정"},timelapseViewer:{skipBack5s:"5초 뒤로",skipForward5s:"5초 앞으로"},notificationProviders:{descriptions:{email:"SMTP 이메일 알림",telegram:"Telegram 봇을 통한 알림",discord:"Webhook을 통해 Discord 채널로 전송",ntfy:"무료, 자체 호스팅 가능한 푸시 알림",pushover:"간단하고 신뢰할 수 있는 푸시 알림",callmebot:"CallMeBot을 통한 무료 WhatsApp 알림",webhook:"모든 URL에 일반 HTTP POST"}},logViewer:{searchPlaceholder:"메시지 또는 로거 이름 검색...",noLogEntries:"로그 항목을 찾을 수 없음"},switchbarPopover:{noSwitchesInSwitchbar:"스위치바에 스위치 없음"},projectPageModal:{placeholders:{title:"제목",designer:"디자이너",license:"라이선스",description:"설명 입력...",profileTitle:"프로필 제목",profileDescription:"프로필 설명..."}},SpoolmanSettings:{},time:{unknown:"-",waiting:"대기 중",justNow:"방금",now:"지금",minsAgo:"{{count}}분 전",inMins:"{{count}}분 후",hoursAgo:"{{count}}시간 전",inHours:"{{count}}시간 후",daysAgo:"{{count}}일 전",inDays:"{{count}}일 후"},spoolbuddy:{nav:{dashboard:"대시보드",ams:"AMS",inventory:"재고",writeTag:"태그 쓰기",settings:"설정"},status:{nfcReady:"NFC 준비됨",nfcOff:"NFC 꺼짐",offline:"오프라인",online:"온라인",noPrinters:"프린터 없음",deviceOffline:"장치 오프라인",waitingConnection:"장치 연결 대기 중...",systemReady:"시스템 준비됨",status:"상태"},dashboard:{readyToScan:"스캔 준비됨",idleMessage:"스풀을 저울에 올려 식별하세요",nfcHint:"NFC 태그가 자동으로 읽힙니다",device:"장치",syncWeight:"무게 동기화",weightSynced:"동기화됨!",unknownTag:"알 수 없는 태그",newTag:"새 태그 감지됨",onScale:"저울 위",linkSpool:"스풀에 연결",linkTagTitle:"태그를 스풀에 연결",linkTag:"태그 연결",selectSpool:"이 태그를 연결할 스풀 선택:",noUntagged:"태그 없는 스풀을 찾을 수 없음",tagDetected:"태그 감지됨",noTag:"태그 없음",tagId:"태그",grossWeight:"총 무게",spoolSize:"스풀 크기",close:"닫기",currentSpool:"현재 스풀",plateReady:"플레이트 준비됨: {{name}}",plateReadyLabel:"초기화할 플레이트",plateClearAction:"초기화",plateClearedToast:"플레이트가 초기화됨으로 표시됨",plateClearFailed:"플레이트를 초기화됨으로 표시할 수 없음"},modal:{spoolDetected:"스풀 감지됨",assignToAms:"AMS에 할당",syncWeight:"무게 동기화",weightSynced:"동기화됨!",syncing:"동기화 중...",newTagDetected:"새 태그 감지됨",addToInventory:"재고에 추가",assignToAmsTitle:"AMS에 할당",selectSlot:"슬롯 선택",assign:"할당",assigning:"할당 중...",assignSuccess:"할당됨!",assignPendingInsert:"할당됨. 스풀을 삽입하면 슬롯이 구성됩니다.",assignError:"스풀 할당 실패. 다시 시도하세요.",noPrinterSelected:"프린터 선택...",noAmsDetected:"이 프린터에서 AMS가 감지되지 않음",slot:"슬롯"},weight:{noReading:"읽기 없음",stable:"안정됨",measuring:"측정 중...",tare:"영점 조정",calibrate:"보정"},spool:{remaining:"남은 양",material:"재료",brand:"브랜드",color:"색상",coreWeight:"코어",labelWeight:"라벨",scaleWeight:"저울",netWeight:"순 무게",lastUsed:"마지막 사용"},ams:{noData:"AMS가 감지되지 않음",connectAms:"필라멘트 슬롯을 보려면 AMS를 연결하세요",noPrinter:"선택된 프린터 없음",selectPrinter:"상단 표시줄에서 프린터를 선택하세요",printerDisconnected:"프린터 연결 끊김",humidity:"습도",level:"레벨",active:"활성",slot:"슬롯",empty:"비어 있음"},inventory:{search:"스풀 검색...",empty:"재고에 스풀 없음",noResults:"일치하는 스풀 없음",spools:"스풀",addSpool:"스풀 추가"},settings:{tabDevice:"장치",tabDisplay:"화면",tabScale:"저울",tabUpdates:"업데이트",nfcReader:"NFC 리더",type:"유형",connection:"연결",notConnected:"N/A",deviceInfo:"장치 정보",hostname:"호스트",uptime:"가동 시간",systemConfig:"백엔드 및 인증",backendUrl:"Bambuddy 백엔드 URL",apiToken:"API 토큰",apiTokenPlaceholder:"API 토큰 입력",saveConfig:"구성 저장",systemQueued:"구성 대기 중.",nfcDiagnostic:"NFC 진단",scaleDiagnostic:"저울 진단",readTagDiagnostic:"태그 읽기 진단",testNfc:"리더 테스트",testScale:"정확도 테스트",testReadTag:"태그 읽기",systemFieldsRequired:"백엔드 URL이 필요합니다.",brightness:"밝기",saved:"저장됨",noBacklight:"DSI 백라이트가 감지되지 않음. 밝기 제어는 DSI 디스플레이가 필요합니다.",screenBlank:"화면 꺼짐 대기 시간",screenBlankDesc:"비활성 후 화면이 꺼집니다. 터치하여 깨우세요.",displayNote:"밝기는 소프트웨어 필터로 적용됩니다.",scaleCalibration:"저울 보정",currentWeight:"현재 무게",tareOffset:"영점",calFactor:"계수",knownWeight:"알려진 무게",calStep1:"저울에서 모든 물건을 제거하고 영점 설정을 누르세요.",calStep2:"저울에 알려진 무게를 올리세요.",setZero:"영점 설정",calibrateNow:"보정",calibrated:"보정됨",tareSet:"영점 조정 명령 전송됨. 장치 대기 중...",tareComplete:"영점 조정 완료!",tareTimedOut:"영점 조정 시간 초과 — SpoolBuddy 데몬이 실행 중인가요?",tareFailed:"영점 조정 명령 전송 실패",zeroSet:"영점이 설정됨. 저울에 알려진 무게를 올리세요.",calibrationDone:"보정 완료!",calibrationFailed:"보정 실패",lastCalibrated:"마지막 보정",stable:"안정됨",settling:"안정화 중...",firmware:"펌웨어",scale:"저울",noDevice:"SpoolBuddy 장치를 찾을 수 없음",daemonVersion:"데몬 버전",currentVersion:"현재",versionPending:"데몬 대기 중...",checking:"확인 중...",checkUpdates:"업데이트 확인",updateAvailable:"업데이트 사용 가능",updateInstructions:"SSH를 통해 업데이트: SpoolBuddy 설치 스크립트를 실행하여 업그레이드하세요.",upToDate:"최신 버전",includeBeta:"베타 버전 포함"},writeTag:{tabExisting:"기존 스풀",tabNew:"새 스풀",tabReplace:"태그 교체",searchPlaceholder:"재료, 색상, 브랜드로 검색...",noUntaggedSpools:"태그 없는 스풀 없음",noTaggedSpools:"태그 있는 스풀 없음",selectSpool:"스풀을 선택한 후 빈 NTAG를 리더에 올려놓으세요",placeTag:"NTAG를 리더에 올려놓으세요",tagReady:"태그 감지됨 — 쓰기 준비됨",writeTag:"태그 쓰기",replaceTag:"태그 교체",writing:"태그 쓰는 중...",waiting:"SpoolBuddy 대기 중...",writeSuccess:"태그 성공적으로 쓰여짐!",writeFailed:"쓰기 실패",queueFailed:"쓰기 명령 대기 실패",tryAgain:"다시 시도",cancel:"취소",replaceWarning:"이전 태그가 연결 해제됩니다. 새 태그가 교체합니다.",deviceOffline:"SpoolBuddy가 오프라인입니다",material:"재료",colorName:"색상 이름",color:"색상",brand:"브랜드",weight:"무게 (g)",createSpool:"스풀 생성",creating:"생성 중...",spoolCreated:"스풀 생성됨! 쓰기 준비됨.",createFailed:"스풀 생성 실패",incompleteDataWarning:"불완전한 Spoolman 데이터로 태그 쓰여짐"},quickMenu:{printerPower:"프린터 전원",systemControls:"시스템",restartDaemon:"데몬 재시작",restartBrowser:"브라우저 재시작",reboot:"재부팅",shutdown:"종료",swipeToClose:"아래로 스와이프하여 닫기",confirmTitle:"확인",confirmShutdown:"SpoolBuddy를 종료하시겠습니까? 다시 켜려면 물리적 접근이 필요합니다.",confirmReboot:"SpoolBuddy를 재부팅하시겠습니까?",confirmRestartDaemon:"SpoolBuddy 데몬을 재시작하시겠습니까? NFC와 저울이 일시적으로 사용 불가능합니다.",confirmRestartBrowser:"키오스크 브라우저를 재시작하시겠습니까? 화면이 잠시 꺼집니다.",confirm:"확인",confirmPlugOn:"{{name}}을(를) 켜시겠습니까?",confirmPlugOff:"{{name}}을(를) 끄시겠습니까?",turnOn:"켜기",turnOff:"끄기"}},bugReport:{title:"버그 신고",description:"설명",descriptionPlaceholder:"무엇이 잘못되었나요? 문제를 설명해 주세요...",email:"이메일 (선택사항)",emailPlaceholder:"your@email.com",emailPrivacy:"제공하면 이메일이 GitHub 이슈의 접힌 섹션에 포함되어 관리자가 후속 조치를 취할 수 있습니다.",screenshot:"스크린샷",uploadOrPaste:"이미지 업로드, 붙여넣기 또는 드래그",dataCollectedSummary:"보고서에 포함되는 데이터는?",dataIncluded:"포함됨:",dataIncludedList:"앱 버전, OS, 아키텍처, Python 버전, 데이터베이스 통계(개수만), 프린터 모델, 노즐 개수, 펌웨어 버전, 연결 상태, 통합 상태(Spoolman, MQTT, HA), 비민감 설정, 네트워크 인터페이스 수, Docker 세부 정보, 의존성 버전.",dataNeverIncluded:"절대 포함되지 않음:",dataNeverIncludedList:"프린터 이름, 일련 번호, 액세스 코드, 비밀번호, IP 주소, 이메일 주소, API 키, 토큰, Webhook URL, 호스트 이름 또는 사용자 이름.",submit:"제출",startLogging:"디버그 로깅 시작",stepEnableLogging:"디버그 로깅 활성화됨",stepReproduce:"이제 문제를 재현하세요",stepStopLogging:"중지 후 보고서 제출",stopAndSubmit:"중지 후 제출",maxDuration:"{{minutes}}분 후 자동 중지",stoppingLogs:"로그 수집 및 제출 중...",submitting:"버그 보고서 제출 중...",submitSuccess:"버그 보고서가 성공적으로 제출되었습니다!",submitFailed:"버그 보고서 제출 실패",thankYou:"감사합니다!",submitted:"버그 보고서가 제출되었습니다.",viewIssue:"이슈 보기",unexpectedError:"예상치 못한 오류가 발생했습니다",submittingStepConnection:"프린터 연결 확인 실행 중",submittingStepVirtualPrinters:"가상 프린터 설정 확인 실행 중",submittingStepLogScan:"알려진 문제가 있는지 최근 로그 스캔 중",submittingStepSubmit:"GitHub에 보고서 제출 중",diagnosticChecking:"프린터 연결 확인 중...",diagnosticHealthy:"연결 확인 통과 — 프린터에서 문제가 발견되지 않았습니다.",diagnosticSummary:"{{total}}개 프린터 중 {{problems}}개에서 연결 문제가 있습니다",diagnosticIntro:"하나 이상의 프린터에 연결 문제가 있어 현재 문제의 원인일 수 있습니다. 아래에서 프린터를 펼쳐 수정 방법을 확인하세요 — 해결하면 버그 보고서 없이 문제가 해결될 수 있습니다. 아래에서 보고서를 제출할 수도 있습니다.",logHealthSummary:"로그에서 알려진 문제가 발견되었습니다",logHealthIntro:"최근 로그가 알려진 문제와 일치합니다. 아래 수정 방법을 확인하세요 — 해결하면 버그 보고서 없이 문제가 해결될 수 있습니다. 아래에서 보고서를 제출할 수도 있습니다."},failureDetection:{title:"AI 실패 감지",description:"자체 호스팅 Obico ML API로 인쇄를 모니터링하고 감지된 실패에 자동으로 조치합니다.",mlUrl:"Obico ML API URL",mlUrlHint:"자체 호스팅 Obico ml_api 컨테이너의 기본 URL (예: http://192.168.1.10:3333).",test:"테스트",testSuccess:"ML API에 도달 가능하며 정상입니다.",testFailed:"ML API에 도달할 수 없습니다.",sensitivity:"민감도",sensitivityLow:"낮음 (오탐 적음)",sensitivityMedium:"중간 (균형)",sensitivityHigh:"높음 (조기 감지, 오탐 많음)",sensitivityHint:"경고 및 실패를 트리거하는 신뢰도 임계값을 조정합니다.",action:"감지된 실패에 대한 조치",actionNotify:"알림만",actionPause:"인쇄 일시 중지",actionPauseOff:"일시 중지 후 전원 끄기",pollInterval:"폴링 간격 (초)",pollIntervalHint:"인쇄 중 각 프린터를 확인하는 빈도. 최소 5초, 최대 120초.",externalUrlMissing:"외부 URL이 설정되지 않았습니다.",externalUrlHint:"ML API가 URL을 통해 카메라 스냅샷을 가져옵니다. ML API 컨테이너가 Bambuddy에 도달할 수 있도록 일반 설정에서 외부 URL을 설정하세요.",perPrinterTitle:"모니터링되는 프린터",perPrinterHint:"감지 서비스가 감시할 프린터를 선택하세요.",monitorAll:"연결된 모든 프린터 모니터링",statusTitle:"상태",serviceRunning:"서비스 실행 중",thresholds:"낮음 / 높음 임계값",activePrinters:"활성 인쇄물",noActivePrints:"현재 실행 중인 인쇄물 없음.",historyTitle:"최근 감지",noHistory:"아직 감지 없음."},makerworld:{title:"MakerWorld",description:"MakerWorld 모델 URL을 붙여넣어 Bambu Handy 앱을 떠나지 않고 Bambuddy에서 직접 가져오고 인쇄하세요.",pasteUrlHeader:"MakerWorld에서 가져오기",pasteUrlPlaceholder:"https://makerworld.com/en/models/… 또는 MakerWorld 링크 붙여넣기",resolveButton:"확인",signInRequiredTitle:"다운로드하려면 Bambu 클라우드 로그인 필요",signInRequiredBody:"익명으로 모델 세부 정보를 탐색할 수 있지만 MakerWorld는 3MF 파일을 다운로드하려면 Bambu 클라우드 계정이 필요합니다.",openCloudSettings:"클라우드 설정 열기",untitledModel:"제목 없는 모델",byCreator:"{{name}} 제작",downloadsCount:"{{count}}회 다운로드",licensePrefix:"라이선스",alreadyImported:"이미 라이브러리에 있음",openOnMakerworld:"MakerWorld에서 열기",alreadyInLibrary:"이 모델이 이미 라이브러리에 있습니다 — 파일 관리자 → MakerWorld에서 찾으세요",importSuccess:"{{filename}} 가져옴 — 파일 관리자 → MakerWorld에 저장됨",platesHeader:"플레이트 ({{count}})",plateDefaultName:"플레이트 {{n}}",materialCount:"{{count}}개 필라멘트",amsRequired:"AMS 필요",slicedFor:"{{printer}}용으로 슬라이싱됨",alsoCompatible:"호환 가능으로도 표시됨: {{printers}}",importToLibrary:"저장",sliceIn:"{{slicer}}에서 저장 및 슬라이싱",disclaimer:"MakerWorld 통합은 커뮤니티가 문서화한 API 엔드포인트를 사용합니다. Bambuddy는 MakerWorld 또는 Bambu Lab과 제휴하거나 이들의 승인을 받지 않았습니다.",lastImportSuccess:"라이브러리에 가져옴",lastImportAlreadyInLibrary:"이미 라이브러리에 있음",viewInLibrary:"파일 관리자에서 보기",openInBambuStudio:"Bambu Studio에서 열기",openInOrcaSlicer:"OrcaSlicer에서 열기",importTo:"파일 관리자로 가져오기",recentImportsHeader:"최근 가져오기",phaseResolving:"확인 중",phaseDownloading:"다운로드 중",folderAuto:"MakerWorld (기본값)",importAll:"모두 가져오기",importAllProgress:"{{total}}개 중 {{current}}개 가져오는 중",openGallery:"이미지 갤러리 열기",galleryPrev:"이전 이미지",galleryNext:"다음 이미지",deleteImport:"라이브러리에서 제거",importDeleting:"제거 중…",importDeleted:"라이브러리에서 제거됨",confirmDelete:"라이브러리에서 {{filename}}을(를) 제거하시겠습니까? 로컬 파일이 삭제되지만 MakerWorld에서 다시 가져올 수 있습니다.",errors:{resolveFailed:"MakerWorld URL을 확인할 수 없습니다.",downloadFailed:"다운로드 실패. 다시 시도하세요.",deleteFailed:"라이브러리에서 파일을 제거할 수 없습니다."}},gcodeViewer:{back:"뒤로",backToArchives:"인쇄 아카이브로 돌아가기",backToFiles:"파일 관리자로 돌아가기"},libraryTrash:{title:"휴지통",headerButton:"휴지통",headerTooltip:"휴지통으로 이동된 파일 보기",backToFiles:"파일 관리자로 돌아가기",subtitleAdmin:"삭제된 파일은 {{days}}일 동안 여기에 보관된 후 자동 삭제됩니다. 이 보기는 모든 사용자의 휴지통 파일을 표시합니다.",subtitleUser:"삭제된 파일은 {{days}}일 동안 여기에 보관된 후 자동 삭제됩니다.",loading:"휴지통 불러오는 중…",loadError:"휴지통을 불러올 수 없습니다.",empty:"휴지통이 비어 있습니다.",summary:"{{count}}개 파일 · {{size}}",emptyTrash:"휴지통 비우기",restore:"복원",purgeNow:"지금 삭제",autoPurgeIn:"{{when}} 후 자동 삭제",days:"일",retentionLabel:"자동 삭제 기간",selectAll:"모두 선택",selectOne:"{{filename}} 선택",selectionCount:"{{count}}개 선택됨",bulkRestore:"선택 항목 복원",bulkPurge:"선택 항목 삭제",col:{filename:"파일",folder:"폴더",size:"크기",deleted:"휴지통 이동일",autoPurge:"자동 삭제일",owner:"소유자",actions:"작업"},confirm:{purgeTitle:"영구 삭제?",purgeBody:"{{filename}}이(가) 디스크에서 삭제되며 복원할 수 없습니다.",emptyTitle:"휴지통을 비우시겠습니까?",emptyBody:"{{count}}개의 모든 파일이 디스크에서 삭제됩니다. 이 작업은 취소할 수 없습니다.",bulkPurgeTitle:"선택한 파일을 영구 삭제하시겠습니까?",bulkPurgeBody:"선택한 {{count}}개 파일이 디스크에서 삭제되며 복원할 수 없습니다.",cta:"영구 삭제"},toast:{restored:"파일이 복원되었습니다.",restoreFailed:"파일을 복원할 수 없습니다.",purged:"파일이 영구 삭제되었습니다.",purgeFailed:"파일을 삭제할 수 없습니다.",emptied:"휴지통에서 {{count}}개 파일이 삭제되었습니다.",emptyFailed:"휴지통을 비울 수 없습니다.",retentionSaved:"자동 삭제가 {{days}}일로 설정되었습니다.",retentionFailed:"보존 설정을 저장할 수 없습니다.",bulkRestored:"{{count}}개 파일이 복원되었습니다.",bulkPurged:"{{count}}개 파일이 삭제되었습니다."}},libraryPurge:{title:"오래된 파일 삭제",headerButton:"오래된 파일 삭제",headerTooltip:"오래된 파일을 휴지통으로 일괄 이동",description:"라이브러리에서 오래된 파일을 한 번에 정리합니다. 인쇄 기록이 있는 파일은 마지막 인쇄 날짜 기준으로, 한 번도 인쇄되지 않은 파일은 업로드 날짜 기준으로 계산됩니다.",ageLabel:"다음보다 오래된 파일 이동",days:"일",includeNeverPrinted:"한 번도 인쇄되지 않은 파일 포함",effectsTitle:"삭제 클릭 시 일어나는 일",effect1:"일치하는 파일이 휴지통으로 이동됩니다 — 디스크에서 아직 삭제되지 않습니다.",effect2:"보존 기간이 만료되기 전까지 언제든 휴지통에서 복원할 수 있습니다.",effect3:"보존 기간 후 휴지통 청소기가 디스크에서 영구적으로 제거합니다.",effect4:"외부(연결된) 폴더의 파일은 건너뜁니다 — Bambuddy는 자신이 소유하지 않은 바이트는 절대 삭제하지 않습니다.",previewLoading:"일치하는 파일 수 확인 중…",previewFailed:"삭제 미리보기를 불러올 수 없습니다.",previewSummary:"{{count}}개 파일 · {{size}}이(가) 휴지통으로 이동됩니다",andMore:"…및 {{count}}개 더",warning:"휴지통 파일은 보존 기간이 만료될 때까지 저장 공간을 차지합니다. 즉시 디스크를 확보하려면 나중에 휴지통을 비우세요.",confirmCta:"{{count}}개를 휴지통으로 이동",purging:"휴지통으로 이동 중…",toast:{success:"{{count}}개 파일을 휴지통으로 이동했습니다.",failed:"파일을 삭제할 수 없습니다."}},libraryAutoPurge:{enableLabel:"오래된 파일 자동 삭제",enableDescription:"매일 한 번 관리자 삭제를 실행합니다. 파일이 먼저 휴지통으로 이동됩니다 — 즉시 삭제되지 않습니다.",ageLabel:"다음보다 오래된 파일 자동 삭제",ageDescription:"최소 7일, 최대 10년. 수동 삭제 버튼과 같은 날짜 규칙을 사용합니다.",days:"일",includeNeverPrinted:"한 번도 인쇄되지 않은 파일 포함",saveFailed:"자동 삭제 설정을 저장할 수 없습니다."},archivePurge:{headerButton:"오래된 것 삭제",headerTooltip:"오래된 아카이브 일괄 삭제",title:"오래된 아카이브 삭제",description:"오래된 인쇄 기록을 정리합니다. 각 아카이브는 가장 최근 인쇄 완료 시점 기준으로 계산됩니다 — 아카이브를 다시 인쇄하면 날짜가 새로고침되므로 활성 작업은 절대 삭제되지 않습니다.",ageLabel:"다음 기간 동안 인쇄되지 않은 아카이브 삭제",days:"일",effectsTitle:"삭제 클릭 시 일어나는 일",effect1:"일치하는 각 아카이브가 데이터베이스에서 영구적으로 제거됩니다.",effect2:"3MF, 썸네일, 타임랩스, 소스 3MF, F3D 디자인 파일 및 사진 폴더가 모두 디스크에서 삭제됩니다.",effect3:"아카이브에 대한 휴지통이 없습니다 — 삭제는 즉각적이며 취소할 수 없습니다.",effect4:"아카이브를 다시 인쇄하면 날짜 카운터가 초기화되므로 여전히 사용하는 아카이브는 안전합니다.",previewLoading:"일치하는 아카이브 수 확인 중…",previewFailed:"삭제 미리보기를 불러올 수 없습니다.",previewSummary:"{{count}}개 아카이브 · {{size}}이(가) 삭제됩니다",andMore:"…및 {{count}}개 더",warning:"영구적입니다. 계속하기 전에 보관하고 싶은 것을 다운로드하거나 즐겨찾기에 추가하세요.",confirmCta:"{{count}}개 아카이브 삭제",purging:"삭제 중…",toast:{success:"{{count}}개 아카이브가 삭제되었습니다.",failed:"아카이브를 삭제할 수 없습니다."},purgeStatsLabel:"통계에서도 제거",purgeStatsHint:"일치하는 아카이브를 빠른 통계(필라멘트, 시간, 비용, 에너지)에서 삭제합니다. 이 옵션 없이는 빠른 통계는 모든 기여를 유지하고 파일만 디스크에서 제거됩니다."},archiveAutoPurge:{enableLabel:"오래된 아카이브 자동 삭제",enableDescription:"매일 한 번, 임계값 내에 인쇄되지 않은 아카이브를 영구적으로 삭제합니다. 아카이브를 다시 인쇄하면 카운터가 초기화됩니다. 휴지통 없음 — 삭제는 즉각적입니다.",ageLabel:"다음 기간 동안 인쇄되지 않은 아카이브 자동 삭제",ageDescription:"최소 7일, 최대 10년. 가장 최근 인쇄 완료 시점 기준 — 아카이브를 다시 인쇄하면 날짜가 새로고침됩니다. 아카이브, 3MF, 썸네일, 타임랩스 및 사진을 삭제합니다.",days:"일",runNow:"지금 아카이브 삭제",saveFailed:"자동 삭제 설정을 저장할 수 없습니다.",purgeStatsLabel:"통계에서도 제거",purgeStatsDescription:"활성화되면 일일 정리 작업도 각 삭제된 아카이브를 빠른 통계(필라멘트, 시간, 비용, 에너지)에서 제거합니다. 기본값 비활성화 — 빠른 통계는 기여를 유지하고 파일만 디스크에서 제거됩니다."},cameraTokens:{title:"카메라 API 토큰",navTitle:"카메라 API 토큰",description:"Home Assistant, Frigate, 키오스크 또는 안정적인 URL이 필요한 다른 도구에 카메라 스트림을 내장하기 위한 장기 토큰. 각 토큰은 카메라 스트림 전용이며 언제든지 취소할 수 있습니다.",loading:"불러오는 중…",confirmRevoke:{title:"이 토큰을 취소하시겠습니까?",body:'"{{name}}"을(를) 사용하는 모든 장치가 즉시 접근을 잃습니다. 이 작업은 취소할 수 없습니다.',cancel:"취소",confirm:"취소"},create:{title:"새 토큰 만들기",nameLabel:"토큰 이름",namePlaceholder:"예: Home Assistant",daysLabel:"만료까지 일 수",submit:"만들기",hint:"최대 수명은 365일입니다. 토큰 값은 생성 시 한 번만 표시됩니다 — 지금 복사하세요."},created:{title:"토큰 생성됨 — 지금 복사하세요",warning:"이 토큰은 이 번만 볼 수 있습니다. 이 대화상자를 닫으면 다시는 볼 수 없습니다.",copy:"복사",dismiss:"저장했습니다"},list:{myTitle:"내 토큰",allTitle:"모든 사용자 (관리자 보기)",empty:"아직 토큰 없음.",name:"이름",owner:"소유자",prefix:"접두사",created:"생성일",expires:"만료일",lastUsed:"마지막 사용",revoke:"취소",expired:"만료됨"},toast:{created:"토큰 생성됨",createFailed:"토큰 생성 실패",revoked:"토큰 취소됨",revokeFailed:"토큰 취소 실패",loadFailed:"토큰 불러오기 실패",copied:"클립보드에 복사됨",copyFailed:"복사 실패 — 수동으로 선택하여 복사하세요"}},forecast:{title:"예측",noSpools:"활성 스풀을 찾을 수 없습니다. 예측 데이터를 보려면 재고에 스풀을 추가하세요.",noUsageData:"사용 데이터를 사용할 수 없습니다 — 재고 타임라인을 예측할 수 없습니다.",sku:"SKU",material:"재료",stock:"재고",dailyRate:"소비율",daysLeft:"남은 일수",emptyBy:"소진 예정일",reorderBy:"재주문 기한",actions:"작업",trend:"추세",estimated:"추정",noData:"데이터 없음",timeframe:"기간",chartTitle:"예상 재고 — 상위 5개 재료",dashedLinesROP:"점선 = 재주문 시점",stockLevel:"재고 수준",reorderPoint:"재주문 시점",safetyMargin:"안전 마진",trendLegend:"추세 (기록 기반, 95% 서비스 수준)",estimatedLegend:"추정 (무게 변화)",noDataLegend:"데이터 없음",ropLabel:"ROP",ssLabel:"SS",safetyStockLegend:"안전 재고",stockArrivalLegend:"재고 입고",stockoutLegend:"재고 소진",alertCount_one:"{{count}}개 알림",alertCount_other:"{{count}}개 알림",order:"주문",save:"저장",cancel:"취소",settingsSaved:"설정 저장됨",failedSaveSettings:"설정 저장 실패",globalLeadTimeSaved:"전역 리드 타임 저장됨",globalLeadTime:"전역 리드 타임",globalLeadTimeHint:"전역 리드 타임 하한값 — 모든 SKU의 재주문 시점 계산에 사용됨",skuLeadTimeOverride:"SKU 리드 타임 재정의",skuLeadTimeHint:"0 = 전역 리드 타임 사용. 이 SKU에 대해 재정의하려면 >0으로 설정.",safetyMarginLabel:"안전 마진",effectiveLeadTime:"유효 리드 타임",effectiveLeadTimeHint:"max(전역 {{global}}일, SKU {{sku}}일)",reorderPointHint:"d̄ × LT + 안전 마진 — 재고가 이 수준에 도달하면 주문",safetyMarginHint:"통계적 안전 재고 (z=1.65 × σ × √LT) + 사용자 정의 버퍼",safetyMarginHintDays:"통계적 안전 재고 위에 추가되는 버퍼.{{approx}}",safetyMarginHintDaysApprox:" ≈ 현재 소비율로 {{g}}g.",safetyMarginHintG:"통계적 안전 재고 위에 추가되는 고정 무게 버퍼.{{approx}}",safetyMarginHintGApprox:" ≈ 현재 소비율로 {{days}}일.",individualSpools:"개별 스풀",labelWeight:"라벨",spoolCount_one:"스풀 {{count}}개",spoolCount_other:"스풀 {{count}}개",stockBreakRisk:"재고 소진 위험",stockBreakDetail:"{{days}}일 남음, 리드 타임 {{lt}}일.",stockBreakBefore:"보충 전 재고 소진",reorderNow:"지금 재주문",reorderTriggerPassed:"트리거 날짜 {{date}}가 지났습니다.",shoppingList:"쇼핑 목록",shoppingListItems_one:"({{count}}개 항목)",shoppingListItems_other:"({{count}}개 항목)",shoppingListEmpty:"쇼핑 목록이 비어 있습니다. 항목을 추가하려면 행의 장바구니 아이콘을 클릭하세요.",addToCart:"쇼핑 목록에 추가",alertsSnoozed:"이 SKU의 알림 음소거",alertsEnabled:"이 SKU의 알림 음소거 해제",addedToCart:"쇼핑 목록에 추가됨",failedAddItem:"항목 추가 실패",listView:"목록",logisticsView:"물류",qty:"수량",weight:"무게",leadTime:"리드 타임",expectedRestock:"예상 재입고",status:"상태",note:"메모",pending:"대기 중",purchased:"구매됨",received:"수령됨",markPurchased:"구매됨으로 표시",markReceived:"수령됨으로 표시 — 재고에 스풀 추가",resetToPending:"대기 중으로 초기화",remove:"제거",clearAll:"모두 초기화",downloadCsv:"CSV",addToCartTitle:"쇼핑 목록에 추가",byQuantity:"수량 기준",byDuration:"기간 기준",numberOfSpools:"스풀 수",lastHowManyDays:"몇 일 동안 지속되어야 합니까?",noUsageQty:"사용 데이터 없음 — 수량을 1로 설정합니다.",noteOptional:"메모 (선택사항)",notePlaceholder:"예: 프로젝트 X용, 긴급…",addNSpools_one:"스풀 {{count}}개 추가",addNSpools_other:"스풀 {{count}}개 추가",onArrival:"입고 시",stockBreakIn:"{{days}}일 후 재고 소진.",stockRunsOutBefore:"{{lt}}일 리드 타임이 경과하기 전에 재고가 소진됩니다.",atRate:"{{rate}}g/일 소비율로",moreSpools_one:"스풀 {{count}}개 더",moreSpools_other:"스풀 {{count}}개 더",bridgeGap:"격차를 메우기 위해 필요합니다.",noReadAccess:"재고 예측을 볼 권한이 없습니다.",noWriteAccess:"예측 설정을 수정할 권한이 없습니다."},diagnostic:{modalTitle:"연결 진단 — {{name}}",running:"진단 실행 중...",runningElapsed:"진단 실행 중... ({{elapsed}}초)",waitingForReportHint:"프린터가 상태 보고를 게시하기를 기다리는 중 — 최대 {{max}}초 걸릴 수 있습니다.",runFailed:"진단 실행 실패: {{error}}",retry:"다시 실행",runButton:"진단 실행",sectionTitle:"연결 진단",sectionDescription:"프린터가 연결되지 않거나 인쇄되지 않는 이유를 확인합니다 — 포트 연결 가능 여부, LAN 개발자 모드, Docker 네트워크 모드, 자격증명.",noPrinters:"구성된 프린터가 없습니다.",overall:{ok:"문제가 발견되지 않았습니다 — 프린터 연결이 정상입니다.",warnings:"프린터가 작동하지만 일부 항목에 주의가 필요합니다.",problems:"프린터가 연결되지 않거나 인쇄되지 않는 원인이 되는 문제가 발견되었습니다."},check:{port_mqtt:{title:"제어 포트 (MQTT 8883)",pass:"연결 가능 — 프린터가 제어 연결을 수락하고 있습니다.",fail:"포트 8883에 연결할 수 없습니다. 프린터가 꺼져 있거나, IP 주소가 다르거나, 방화벽이 차단하고 있습니다. 프린터 IP를 확인하고 포트 8883이 차단되지 않았는지 확인하세요."},port_ftps:{title:"파일 전송 포트 (FTPS 990)",pass:"연결 가능 — 인쇄 파일 전송이 작동합니다.",warn:"포트 990에 연결할 수 없습니다. 모니터링은 작동할 수 있지만 프린터로 파일 전송에 실패합니다. 포트 990이 차단되지 않았는지 확인하세요."},port_rtsps:{title:"카메라 포트 (RTSPS 322)",pass:"연결 가능 — 카메라 스트림이 작동합니다.",warn:"포트 322에 연결할 수 없습니다. 라이브 카메라 보기가 작동하지 않습니다. 인쇄에는 영향을 주지 않습니다."},network_mode:{title:"Docker 네트워크 모드",pass:"호스트 네트워크 모드로 실행 중입니다.",warn:'Bambuddy가 Docker 브리지 네트워킹으로 실행 중입니다. 프린터 검색과 가상 프린터에는 호스트 네트워크 모드가 필요합니다 — "network_mode: host"로 컨테이너를 재생성하세요.',skip:"Docker에서 실행 중이 아닙니다 — 해당 없음."},subnet:{title:"네트워크 서브넷",pass:"프린터와 Bambuddy가 같은 서브넷에 있습니다.",warn:"프린터({{printer_ip}})와 Bambuddy({{host_ip}})가 다른 서브넷에 있습니다. 서브넷 간 라우팅이 구성되어 있지 않으면 서로 연결하지 못할 수 있습니다.",skip:"서브넷을 확인할 수 없어 건너뜁니다."},mqtt_auth:{title:"프린터 자격증명",pass:"프린터가 연결을 수락했습니다.",fail:"프린터에 연결됐지만 연결을 거부했습니다. 액세스 코드 또는 시리얼 번호가 잘못됐을 가능성이 높습니다. 개발자 모드를 토글할 때마다 액세스 코드가 변경됩니다 — 프린터 화면에서 다시 복사하세요.",skip:"확인하지 않음 — 프린터에 연결할 수 없었습니다."},developer_mode:{title:"LAN 개발자 모드",pass:"개발자 모드가 활성화되어 있습니다.",fail:"프린터에서 개발자 모드가 꺼져 있습니다. 프린터의 LAN 설정에서 활성화하고 확인을 누르세요. 이 없으면 인쇄가 시작되지 않습니다.",skip:"확인할 수 없음 — 프린터에 연결되어 있어야 합니다."},printer_publishing:{title:"프린터가 상태를 게시 중",pass:"프린터가 상태 업데이트를 게시하고 있습니다 — AMS, 필라멘트, K-프로파일이 슬라이서에 올바르게 반영됩니다.",fail:"MQTT 브로커는 연결을 수락했지만 프린터가 상태 보고를 게시하지 않았습니다. 거의 항상 시리얼 번호가 잘못되었거나 대소문자가 일치하지 않아서 발생합니다 — device/<serial>/report 토픽은 대소문자를 구분합니다. 프린터 설정의 시리얼 번호를 프린터 화면 표시와 비교해 확인하세요.",skip:"확인할 수 없음 — 프린터에 연결되어 있어야 합니다."}}},systemHealth:{sectionTitle:"시스템 상태",sectionDescription:"최근 로그에서 지원 티켓이 되기 전에 직접 해결할 수 있는 알려진 문제를 스캔합니다.",rescan:"다시 스캔",clean:"최근 {{times}}개 로그 항목에서 알려진 문제가 발견되지 않았습니다.",logUnavailable:"파일 로깅이 비활성화되어 로그를 스캔할 수 없습니다. 이 확인을 사용하려면 파일 로깅을 활성화하세요.",learnMore:"수정 방법",fixLabel:"수정:",occurrences:"{{times}}회 발견 — 마지막: {{lastSeen}}",category:{layer8:"직접 해결 가능",environment:"환경",bug:"버그 보고 바람"},signature:{"ftp-auth-rejected":{name:"프린터가 액세스 코드를 거부함",cause:"프린터가 파일 전송 로그인을 거부했습니다. 액세스 코드가 잘못됐거나 개발자 모드를 토글한 후 변경됐습니다.",fix:"프린터 화면(LAN 설정)에서 액세스 코드를 다시 복사하여 Bambuddy의 프린터 설정에서 업데이트하세요."},"ftp-connection-timeout":{name:"파일 전송 연결 시간 초과",cause:"Bambuddy가 프린터의 파일 전송 포트(FTPS 990)에 연결할 수 없었습니다. 포트가 차단됐거나 프린터가 꺼져 있거나 다른 서브넷에 있습니다.",fix:"Bambuddy와 프린터 사이에서 포트 990을 차단하는 것이 없는지 확인하고, 같은 네트워크에 있는지 확인하세요."},"ftp-ssl-error":{name:"보안 파일 전송 핸드셰이크 실패",cause:"프린터의 파일 전송 서버와의 TLS 핸드셰이크가 실패했습니다. 주로 방화벽이나 오래된 프린터 펌웨어가 원인입니다.",fix:"프린터 펌웨어를 업데이트하고 방화벽이나 프록시가 포트 990에서 연결을 가로채지 않는지 확인하세요."},"mqtt-connection-flapping":{name:"프린터 연결이 계속 끊김",cause:"제어 연결(MQTT 8883)이 반복적으로 끊어지고 다시 연결됩니다 — 주로 불안정한 네트워크 경로나 부분적으로 차단된 포트가 원인입니다.",fix:"프린터의 Wi-Fi 신호를 확인하고, 유선 연결을 권장하며, 포트 8883이 안정적으로 연결 가능한지 확인하세요."},"camera-connection-refused":{name:"카메라 스트림 연결 불가",cause:"포트 RTSPS 322에서 라이브 카메라에 연결할 수 없었습니다. 포트가 차단됐거나 프린터에서 카메라 또는 LAN 라이브뷰가 꺼져 있습니다.",fix:"프린터에서 카메라와 LAN 라이브뷰를 활성화하고 포트 322가 차단되지 않았는지 확인하세요. 인쇄에는 영향을 주지 않습니다."},"database-locked":{name:"데이터베이스 쓰기 경합",cause:'SQLite 데이터베이스에 부하 시 "database is locked" 오류가 발생합니다 — 여러 프린터를 동시에 실행할 때 흔한 문제입니다.',fix:"Bambuddy를 외부 PostgreSQL 데이터베이스로 전환하세요. 설명서의 PostgreSQL 가이드를 참고하세요."}}},vpDiagnostic:{title:"설정 확인 — {{name}}",runButton:"설정 확인 실행",running:"설정 확인 실행 중...",runFailed:"설정 확인을 실행할 수 없습니다: {{error}}",retry:"다시 실행",overall:{ok:"모든 확인이 통과됐습니다 — 이 가상 프린터가 올바르게 설정되었습니다.",warnings:"가상 프린터가 작동하지만 일부 항목에 주의가 필요합니다.",problems:"슬라이서가 이 가상 프린터를 인식하거나 사용할 수 없는 원인이 되는 문제가 발견되었습니다."},check:{enabled:{title:"가상 프린터 활성화",fail:"이 가상 프린터가 꺼져 있습니다. 검색 가능하게 하려면 켜세요."},running:{title:"서비스 실행 중",fail:"가상 프린터가 활성화됐지만 서비스가 실행 중이 아닙니다. Bambuddy 로그를 확인하세요 — 바인드 IP 충돌이나 권한 오류가 보통 원인입니다."},bind_interface:{title:"바인드 네트워크 인터페이스",fail:"바인드 인터페이스가 설정되지 않았거나 이 호스트에 더 이상 존재하지 않습니다. 바인드 인터페이스 드롭다운에서 현재 인터페이스를 선택하세요."},access_code:{title:"액세스 코드 설정됨",fail:"액세스 코드가 설정되지 않았습니다. 슬라이서에는 여기에 설정한 것과 동일한 8자리 액세스 코드가 필요합니다."},target_printer:{title:"대상 프린터",fail:"대상 프린터가 선택되지 않았습니다. 프록시 모드에는 실제 프린터가 필요합니다.",warn:"대상 프린터가 현재 오프라인입니다 — 재연결되면 프록시가 재개됩니다."},port_ftps:{title:"파일 업로드 서비스 (포트 {{port}})",fail:"바인드 IP의 포트 {{port}}에서 수신 중인 서비스가 없어 슬라이서가 파일을 업로드할 수 없습니다. 이 인터페이스의 포트 충돌이 일반적인 원인입니다."},port_mqtt:{title:"제어 서비스 (포트 {{port}})",fail:"바인드 IP의 포트 {{port}}에서 수신 중인 서비스가 없어 슬라이서가 연결하거나 상태를 표시할 수 없습니다."},port_bind:{title:"검색 서비스 (포트 {{port}})",fail:"바인드 IP의 포트 {{port}}에서 수신 중인 서비스가 없어 슬라이서의 검색 핸드셰이크가 실패합니다."},certificate:{title:"TLS 인증서",pass:"인증서가 준비됐습니다. Bambuddy CA 인증서(위)가 슬라이서의 신뢰 저장소에 가져와져 있는지 확인하세요.",fail:"이 가상 프린터의 TLS 인증서가 없습니다. Bambuddy 데이터 디렉터리가 쓰기 가능한지 확인하세요."}}}},Ppe={nav:{printers:"Impressoras",archives:"Arquivos",queue:"Fila de impressão",stats:"Estatísticas",profiles:"Perfis",maintenance:"Manutenção",projects:"Projetos",inventory:"Inventário",files:"Gerenciador de Arquivos",makerworld:"MakerWorld",notifications:"Notificações",settings:"Configurações",system:"Sistema",collapseSidebar:"Recolher barra lateral",expandSidebar:"Expandir barra lateral",update:"Atualizar",updateAvailable:"Atualização disponível: v{{version}}",updateAvailableBanner:"Versão {{version}} está disponível!",viewUpdate:"Ver atualização",viewOnGithub:"Ver no GitHub",keyboardShortcuts:"Atalhos de teclado (?)",switchToLight:"Mudar para modo claro",switchToDark:"Mudar para modo escuro",switchToSystem:"Mudar para modo do sistema",smartSwitches:"Interruptores inteligentes",logout:"Sair",installApp:"Instalar app",installAppSuccess:"Bambuddy foi instalado"},common:{save:"Salvar",saving:"Salvando...",cancel:"Cancelar",delete:"Excluir",edit:"Editar",add:"Adicionar",close:"Fechar",confirm:"Confirmar",loading:"Carregando...",error:"Erro",errorLoading:"Erro ao carregar",retry:"Tentar novamente",success:"Sucesso",warning:"Aviso",enabled:"Ativado",disabled:"Desativado",yes:"Sim",no:"Não",on:"Ligado",off:"Desligado",all:"Todos",none:"Nenhum",search:"Pesquisar",filter:"Filtrar",sort:"Ordenar",refresh:"Atualizar",download:"Baixar",upload:"Enviar",uploading:"Enviando...",uploadFailed:"Falha no envio",actions:"Ações",status:"Status",name:"Nome",description:"Descrição",date:"Data",time:"Hora",hours:"Horas",minutes:"Minutos",seconds:"Segundos",days:"Dias",enable:"Ativar",disable:"Desativar",permissions:"Permissões",noPrinters:"Nenhuma impressora configurada",noData:"Nenhum dado disponível",linkNotFound:"Link não encontrado",required:"Obrigatório",optional:"Opcional",dismiss:"Dispensar",apply:"Aplicar",reset:"Redefinir",export:"Exportar",import:"Importar",clear:"Limpar",selectAll:"Selecionar tudo",deselectAll:"Desmarcar tudo",noChange:"— Sem alterações —",unchanged:"Inalterado",unassigned:"Não atribuído",unknown:"Desconhecido",unknownError:"Erro desconhecido",today:"Hoje",tomorrow:"Amanhã",asap:"O mais rápido possível",overdue:"Atrasado",now:"Agora",collapse:"Recolher",expand:"Expandir",viewArchive:"Ver arquivo",viewInFileManager:"Ver no Gerenciador de Arquivos",addedBy:"Adicionado por {{username}}",prints:"impressões",more:"+{{count}} mais",ascending:"Crescente",descending:"Decrescente",back:"Voltar",copy:"Copiar",copied:"Copiado!",printer:"Impressora",remove:"Remover",type:"Tipo",print:"Imprimir",rename:"Renomear",move:"Mover",create:"Criar",duplicate:"Duplicar",left:"Esquerda",right:"Direita"},printers:{addPreflight:{checking:"Verificando a conexão...",warning:"Algumas verificações de conexão falharam. Esta impressora pode aparecer como offline. Revise as verificações abaixo, corrija o que puder ou salve mesmo assim.",back:"Voltar",saveAnyway:"Salvar mesmo assim"},title:"Impressoras",addPrinter:"Adicionar Impressora",editPrinter:"Editar Impressora",deletePrinter:"Excluir Impressora",printerName:"Nome da Impressora",serialNumber:"Número de Série",ipAddress:"Endereço IP / Nome do Host",accessCode:"Código de Acesso",model:"Modelo",nozzleCount:"Número de Bicos",autoArchive:"Arquivamento Automático",status:{available:"Disponível",idle:"Ocioso",printing:"Imprimindo",paused:"Pausado",offline:"Offline",problem:"Problema",error:"Erro",finished:"Concluído",unknown:"Desconhecido"},temperatures:{nozzle:"Bico",bed:"Cama",chamber:"Câmara"},progress:"{{percent}}% concluído",timeRemaining:"{{time}} restante",deleteConfirm:'Tem certeza de que deseja excluir "{{name}}"?',maintenanceOk:"Manutenção OK",maintenanceWarning:"{{count}} aviso",maintenanceWarning_plural:"{{count}} avisos",maintenanceDue:"{{count}} devido",maintenanceDue_plural:"{{count}} devido",sort:{name:"Nome",status:"Status",model:"Modelo",location:"Localização",ascending:"Ordem crescente",descending:"Ordem decrescente"},cardSize:{small:"Cartões pequenos",medium:"Cartões médios",large:"Cartões grandes",extraLarge:"Cartões extra grandes"},hideOffline:"Ocultar offline",nextAvailable:"Próximo disponível",powerOn:"Ligar",offlinePrintersWithPlugs:"Impressoras offline com tomadas inteligentes",noPrintersConfigured:"Nenhuma impressora configurada ainda",search:"Pesquisar impressoras...",noSearchResults:"Nenhuma impressora corresponde à sua pesquisa ou filtros",filter:{allStatuses:"Todos os status",allLocations:"Todos os locais"},toolbar:{filters:"Filtros",view:"Visualização",actions:"Ações"},readyToPrint:"Pronto para imprimir",external:"Externo",extL:"Ext-L",extR:"Ext-R",deleteArchives:"Excluir arquivos de impressão",noLabel:"Sem etiqueta",printPreview:"Pré-visualização de impressão",width:"Largura",height:"Altura",noObjectsFound:"Nenhum objeto encontrado",objectsLoadedOnPrintStart:"Objetos são carregados quando uma impressão começa",willBeSkipped:"Será ignorado",name:"Nome",serialCannotBeChanged:"Número de série não pode ser alterado",locationHelp:"Usado para agrupar impressoras e filtrar trabalhos na fila",wifiSignal:{veryWeak:"Muito fraco",weak:"Fraco",fair:"Regular",good:"Bom",excellent:"Excelente"},maintenanceUpToDate:"Toda a manutenção está em dia - Clique para ver",chamberLightOn:"Ligar luz da câmara",chamberLightOff:"Desligar luz da câmara",files:"Arquivos",browseFiles:"Procurar arquivos da impressora",autoOffAfterPrint:"Desligamento automático após impressão",autoOffExecuted:"Desligamento automático executado - ligue a impressora para reiniciar",hmsErrors:"Erros HMS",viewHmsErrors:"Ver {{count}} erro(s) HMS",resume:"Retomar",pause:"Pausar",stop:"Parar",camera:"âmera",skipObject:"Ignorar objeto",reconnect:"Reconectar",forceRefresh:"Forçar atualização",forceRefreshSuccess:"Atualização solicitada",mqttDebug:"Depuração MQTT",printerInformation:"Informações da impressora",copyToClipboard:"Copiar",copied:"Copiado!",state:"Estado",wifiSignalLabel:"Sinal WiFi",developerMode:"Modo desenvolvedor",enabled:"Ativado",disabled:"Desativado",addedOn:"Adicionada em",sdCard:"Cartão SD",inserted:"Inserido",notInserted:"Não inserido",totalPrintHours:"Horas de impressão",activeNozzle:"Ativo: {{nozzle}} bico",nozzleRack:"Suporte de bicos",nozzleDocked:"Acoplado",nozzleMounted:"Montado",nozzleActive:"Ativo",nozzleIdle:"Ocioso",nozzleDiameter:"Diâmetro",nozzleType:"Tipo",nozzleStatus:"Status",nozzleFilament:"Filamento",nozzleWear:"Desgaste",nozzleMaxTemp:"Temp Máx",nozzleSerial:"Número de série",nozzleHardenedSteel:"Aço Endurecido",nozzleStainlessSteel:"Aço Inoxidável",nozzleTungstenCarbide:"Carboneto de Tungstênio",nozzleFlow:"Fluxo",nozzleHighFlow:"Alto Fluxo",nozzleStandardFlow:"Fluxo Padrão",firmwareUpdate:"Atualização de Firmware",firmwareInstructions:"No visor da impressora, vá para",firmwareNav:"Navegar para",settings:"Configurações",firmware:"Firmware",discoverPrinters:"Descobrir Impressoras",searching:"Procurando...",manualEntry:"Entrada Manual",addFromCloud:"Adicionar da Nuvem",toast:{printerDeleted:"Impressora excluída",missingSpoolAssignment:"Impressão iniciada em {{printer}}. Atribuição de bobina ausente para: {{slots}}",printerAdded:"Impressora adicionada",printerUpdated:"Impressora atualizada",failedToDelete:"Falha ao excluir impressora",failedToAdd:"Falha ao adicionar impressora",connectionFailedNotAdded:"Não foi possível conectar à impressora. Verifique o IP, o número de série e o código de acesso, e confirme que o modo somente LAN está ativado. A impressora não foi adicionada.",failedToUpdate:"Falha ao atualizar impressora",commandSent:"Comando enviado",failedToSendCommand:"Falha ao enviar comando",turnedOn:"{{name}} ligado",failedToPowerOn:"Falha ao ligar {{name}}",scriptTriggered:"Script acionado",printStopped:"Impressão parada",printPaused:"Impressão pausada",printResumed:"Impressão retomada",referenceDeleted:"Referência excluída",detectionAreaSaved:"Área de detecção salva",failedToRunScript:"Falha ao executar script",failedToStopPrint:"Falha ao parar impressão",failedToPausePrint:"Falha ao pausar impressão",failedToResumePrint:"Falha ao retomar impressão",failedToControlChamberLight:"Falha ao controlar a luz da câmara",failedToSetSpeed:"Falha ao definir a velocidade de impressão",failedToUpdateSetting:"Falha ao atualizar configuração",failedToSkipObjects:"Falha ao ignorar objetos",failedToRereadRfid:"Falha ao reler RFID",failedToCheckPlate:"Falha ao verificar a placa",failedToUpdateLabel:"Falha ao atualizar etiqueta",failedToDeleteReference:"Falha ao excluir referência",failedToSaveDetectionArea:"Falha ao salvar área de detecção",plateCheckEnabled:"Verificação da placa ativada",plateCheckDisabled:"Verificação da placa desativada",calibrationSaved:"Calibração salva!",calibrationFailed:"Falha na calibração",rfidRereadInitiated:"Releitura de RFID iniciada",loadInitiated:"Carregando filamento…",unloadInitiated:"Descarregando filamento…",failedToLoad:"Falha ao carregar filamento",failedToUnload:"Falha ao descarregar filamento"},connection:{connected:"Conectado",offline:"Offline"},plateStatus:{markCleared:"Marcar placa como liberada",cleared:"Placa liberada",notCleared:"Placa não liberada",inUse:"Placa em uso"},queue:{inQueue:"{{count}} impressão na fila",inQueue_plural:"{{count}} impressões na fila"},controls:"Controles",rfid:{reread:"Releitura de RFID"},ams:{load:"Carregar",unload:"Descarregar"},bedJog:{title:"Mover a mesa de impressão",bed:"Mesa",step:"Passo (mm)",up:"Mover mesa para cima",down:"Mover mesa para baixo",disabledWhilePrinting:"Desativado durante a impressão",notHomedTitle:"Impressora não referenciada",notHomedMessage:"A impressora não foi referenciada desde a última impressão. Execute a referência automática primeiro para um posicionamento seguro (estaciona o cabeçote, depois referencia X, Y e Z), ou mova assim mesmo — os fins de curso de software serão ignorados.",homeZ:"Referência automática",moveAnyway:"Mover assim mesmo",homingStarted:"Referenciando impressora automaticamente…"},permission:{noAdd:"Você não tem permissão para adicionar impressoras",noEdit:"Você não tem permissão para editar impressoras",noDelete:"Você não tem permissão para excluir impressoras",noControl:"Você não tem permissão para controlar impressoras",noFiles:"Você não tem permissão para acessar arquivos de impressora",noAmsRfid:"Você não tem permissão para reler RFID AMS",noSmartPlugControl:"Você não tem permissão para controlar tomadas inteligentes",noCamera:"Você não tem permissão para visualizar câmeras"},modal:{addTitle:"Adicionar Impressora",editTitle:"Editar Impressora",myPrinter:"Minha Impressora",selectModel:"Selecionar modelo...",locationGroup:"Localização / Grupo (opcional)",locationPlaceholder:"ex.: Oficina, Escritório, Porão",autoArchiveLabel:"Arquivar automaticamente impressões concluídas",fromPrinterSettings:"A partir das configurações da impressora",modelOptional:"Modelo (opcional)",saveChanges:"Salvar alterações"},skipObjects:{tooltip:"Ignorar objetos",onlyWhilePrinting:"Ignorar objetos (apenas durante a impressão)",requiresMultiple:"Ignorar objetos (requer 2+ objetos)",title:"Ignorar Objetos",matchIdsInfo:"Correspondência de IDs com o display da sua impressora",printerShowsIds:"A tela da impressora mostra os IDs dos objetos na placa de construção",skipSelected:"Ignorar Selecionados",skipping:"Ignorando...",noObjectsSelected:"Nenhum objeto selecionado",selectObjectsToSkip:"Selecione os objetos que deseja ignorar na impressão atual",skipped:"Ignorado",objectsSkipped:"Objetos ignorados",activeCount:"{{count}} ativo",waitForLayer:"Aguarde a camada 2+ para ignorar objetos (atualmente na camada {{layer}})",skip:"Ignorar",confirmTitle:"Ignorar Objeto?",confirmMessage:'Tem certeza de que deseja ignorar "{{name}}"? Isso não pode ser desfeito.'},confirm:{deleteTitle:"Excluir Impressora",deleteMessage:'Tem certeza de que deseja excluir "{{name}}"? Isso removerá todas as configurações de conexão.',deleteArchivesNote:"Todo o histórico de impressão desta impressora será permanentemente excluído.",keepArchivesNote:"O histórico de impressão será mantido, mas não estará mais associado a esta impressora.",stopTitle:"Parar Impressão",stopMessage:'Tem certeza de que deseja parar a impressão atual em "{{name}}"? Isso cancelará o trabalho de impressão.',stopButton:"Parar Impressão",pauseTitle:"Pausar Impressão",pauseMessage:'Tem certeza de que deseja pausar a impressão atual em "{{name}}"?',pauseButton:"Pausar Impressão",resumeTitle:"Retomar Impressão",resumeMessage:'Tem certeza de que deseja retomar a impressão em "{{name}}"?',resumeButton:"Retomar Impressão",powerOnTitle:"Ligar Impressora",powerOnMessage:'Tem certeza de que deseja ligar a impressora "{{name}}"?',powerOnButton:"Ligar",powerOffTitle:"Desligar Impressora",powerOffMessage:'Tem certeza de que deseja desligar a impressora "{{name}}"?',powerOffWarning:'AVISO: "{{name}}" está imprimindo no momento! Tem certeza de que deseja desligar a impressora? Isso interromperá a impressão e pode danificar a impressora.',powerOffButton:"Desligar",haToggleTitle:'Alternar "{{name}}"',haToggleMessage:"Alternar a entidade Home Assistant {{entity}}? Isso pode desligar a energia se estiver ligada no momento.",haToggleWarning:'AVISO: "{{name}}" está imprimindo no momento! Alternar {{entity}} pode cortar a energia e interromper a impressão. Continuar?',haToggleButton:"Alternar"},bulk:{select:"Selecionar",selectAll:"Selecionar tudo",selectByLocation:"Selecionar por local",selected:"{{count}} selecionado(s)",actions:{stop:"Parar",pause:"Pausar",resume:"Retomar",clearPlate:"Limpar mesa",clearHMS:"Limpar notificações"},confirm:{stopTitle:"Parar {{count}} impressões",stopMessage:"Isso cancelará as impressões ativas em {{count}} impressora(s). Esta ação não pode ser desfeita.",stopButton:"Parar todas",pauseTitle:"Pausar {{count}} impressões",pauseMessage:"Isso pausará as impressões ativas em {{count}} impressora(s).",pauseButton:"Pausar todas",clearPlateTitle:"Limpar {{count}} mesas de impressão",clearPlateMessage:"Isso limpará a mesa de impressão em {{count}} impressora(s) e pode iniciar trabalhos na fila.",clearPlateButton:"Limpar todas"},success:"{{action}} concluído em {{count}} impressora(s)",partial:"{{succeeded}} bem-sucedido(s), {{failed}} falhou/falharam",noneApplicable:"Nenhuma impressora selecionada está no estado correto para esta ação",selectByState:"Selecionar por estado"},discovery:{title:"Descobrir Impressoras",searching:"Procurando...",scanning:"Escaneando...",scanProgress:"Escaneando... {{scanned}}/{{total}}",foundPrinters:"{{count}} impressora(s) encontrada(s)",noPrintersFound:"Nenhuma impressora encontrada",noPrintersFoundSubnet:"Nenhuma impressora encontrada na sub-rede especificada.",noPrintersFoundNetwork:"Nenhuma impressora encontrada na rede.",allConfigured:"Todas as impressoras descobertas já estão configuradas.",alreadyAdded:"Já adicionada",select:"Selecionar",manualEntry:"Entrada Manual",addFromCloud:"Adicionar da Nuvem",subnetToScan:"Sub-rede para escanear",dockerNote:"Docker detectado. Insira a sub-rede da sua impressora em notação CIDR. Requer network_mode: host no docker-compose.yml.",scanSubnet:"Escanear Sub-rede para Impressoras",discoverNetwork:"Descobrir Impressoras na Rede",scanningSubnet:"Escaneando sub-rede para impressoras Bambu...",scanningNetwork:"Escaneando rede...",serialRequired:"Serial necessário",unknown:"Desconhecido",failedToStart:"Falha ao iniciar a descoberta",customSubnetOption:"Sub-rede personalizada...",customSubnetLabel:"Sub-rede personalizada (CIDR)",customSubnetNote:"Use uma sub-rede personalizada se sua impressora estiver em uma rede diferente deste servidor. As portas FTP (990) e MQTT (8883) devem estar acessíveis através do limite de roteamento."},drying:{start:"Iniciar secagem",stop:"Parar secagem",temperature:"Temperatura",duration:"Duração",hours:"horas",timeRemaining:"{{time}} restante",active:"Secagem",notSupported:"Secagem não suportada",powerRequired:"Conecte o adaptador de energia AMS para ativar a secagem",startingDrying:"Iniciando secagem...",stoppingDrying:"Parando secagem...",rotateTray:"Girar o carretel durante a secagem"},filaments:"Filamentos",openCameraOverlay:"Abrir sobreposição da câmera",openCameraWindow:"Abrir câmera em nova janela",firmwareUpdateAvailable:"Atualização de firmware disponível: {{current}} → {{latest}}",firmwareUpToDate:"Firmware {{version}} — Atualizado",firmwareUpdateButton:"Atualizar",plateDetection:{noPermission:"Você não tem permissão para atualizar impressoras",enabledClick:"Verificação da placa ativada - Clique para desativar",disabledClick:"Verificação da placa desativada - Clique para ativar",manageCalibration:"Gerenciar calibração da detecção da placa",calibrationRequired:"Calibração necessária",calibrationInstructions:"Certifique-se de que a placa de construção esteja <strong>completamente vazia</strong>, em seguida clique em Calibrar.",calibrationDescription:"A calibração captura uma imagem de referência da placa vazia. Verificações futuras compararão com esta referência para detectar objetos.",calibrationTip:"<strong>Dica:</strong> Você pode armazenar até 5 calibrações para diferentes placas. O sistema usa automaticamente a melhor correspondência ao verificar.",plateEmpty:"A placa parece vazia",objectsDetected:"Objetos detectados na placa",confidence:"Confiança",difference:"Diferença",analysisPreview:"Pré-visualização da análise:",analysisLegend:"Caixa verde = área de detecção, Sobreposição vermelha = diferenças em relação à calibração",savedReferences:"Referências salvas ({{count}}/{{max}})",deleteReference:"Excluir referência",labelPlaceholder:"Etiqueta...",clickToEdit:"{{label}} - Clique para editar",clickToAddLabel:"Clique para adicionar etiqueta"},speed:{title:"Velocidade de impressão",silent:"Silencioso (50%)",standard:"Padrão (100%)",sport:"Sport (124%)",ludicrous:"Ludicrous (166%)"},airduct:{title:"Modo do duto de ar",cooling:"Resfriamento",heating:"Aquecimento"},noSdCard:"Sem SD",door:{open:"Aberta",closed:"Fechada"},fans:{partCooling:"Ventilador de resfriamento da peça",auxiliary:"Ventilador auxiliar",chamber:"Ventilador da câmara"},clickToViewHmsErrors:"Clique para ver erros do HMS",estimatedCompletion:"Tempo estimado de conclusão",plateNumber:"Placa {{number}}",slotOptions:"Opções de slot",amsPopup:{friendlyName:"Nome do AMS",friendlyNamePlaceholder:"ex.: Nome amigável do AMS",serialNumber:"Número de série",firmwareVersion:"Firmware",save:"Salvar",clear:"Limpar",noEditPermission:"Você não tem permissão para renomear unidades AMS"},firmwareModal:{title:"Atualização de Firmware",titleUpToDate:"Informações do Firmware",currentVersion:"Atual:",latestVersion:"Última:",releaseNotes:"Notas de Lançamento",checkingPrereqs:"Verificando pré-requisitos...",sdCardReady:"Cartão SD pronto. Clique abaixo para enviar o firmware.",uploadedSuccess:"Firmware enviado para o cartão SD!",applyInstructions:"Para aplicar a atualização na sua impressora:",step1:"Na tela sensível ao toque da impressora, vá para <strong>Configurações</strong>",step2:"Navegue até <strong>Firmware</strong>",step3:"Selecione <strong>Atualizar a partir do cartão SD</strong>",step4:"A atualização levará de 10 a 20 minutos",done:"Concluído",starting:"Iniciando...",uploadFirmware:"Enviar Firmware",uploadFailed:"Falha ao iniciar o envio: {{error}}",uploadedToast:"Firmware enviado! Inicie a atualização na tela da impressora.",availableVersions:"Versões disponíveis",usable:"Utilizável",unavailable:"Indisponível",installed:"Instalada",newerBadge:"mais recente",olderBadge:"mais antiga",currentBadge:"atual"},accessCodePlaceholder:"Deixe vazio para manter o atual",roi:{title:"Área de Detecção (ROI)",xStart:"Início X",yStart:"Início Y",width:"Largura",height:"Altura",instruction:"Ajuste a área de detecção para focar na placa de construção. A caixa verde na pré-visualização mostra a área atual."},developerModeWarning:"O modo desenvolvedor LAN não está ativado em: {{names}}. Alguns recursos podem não funcionar.",howToEnable:"Como ativar",incompatibleFile:"Este arquivo foi fatiado para {{slicedFor}}, mas esta impressora é uma {{printerModel}}",dropNotPrintable:"Apenas arquivos .gcode e .gcode.3mf podem ser impressos",dropToPrint:"Solte para imprimir",cannotPrint:"Impressora ocupada"},archives:{title:"Arquivos de Impressão",searchPlaceholder:"Pesquisar arquivos...",filterByPrinter:"Filtrar por impressora",filterByStatus:"Filtrar por status",sortBy:"Ordenar por",sortNewest:"Mais recentes primeiro",sortOldest:"Mais antigos primeiro",sortName:"Nome",sortDuration:"Duração",sortLargest:"Maiores primeiro",sortSmallest:"Menores primeiro",sortSize:"Tamanho",noArchives:"Nenhum arquivo encontrado",noArchivesSearch:"Nenhum arquivo corresponde à sua pesquisa",originalPrintNotVisible:"Impressão original não visível - tente limpar os filtros",noArchivesYet:"Ainda não há arquivos",prints:"impressões",pagination:{showing:"Mostrando",to:"a",of:"de",show:"Mostrar",page:"Página",all:"Todos"},loadingArchives:"Carregando arquivos...",releaseToUpload:"Solte para enviar",showAll:"Mostrar todos",showFavoritesOnly:"Mostrar apenas favoritos",gridView:"Visualização em grade",listView:"Visualização em lista",calendarView:"Visualização em calendário",logView:"Registro de impressão",manageTags:"Gerenciar etiquetas",showFailedPrints:"Mostrar impressões falhas",hideFailedPrints:"Ocultar impressões falhas",hideDuplicates:"Ocultar duplicados",viewOriginalPrint:"Clique para visualizar a impressão original (#{{id}})",printTime:"Tempo de impressão",filamentUsed:"Filamento usado",cost:"Custo",reprint:"Reimprimir",preview:"Pré-visualizar",deleteArchive:"Excluir arquivo",deleteConfirm:"Tem certeza de que deseja excluir este arquivo?",favorite:"Favorito",unfavorite:"Remover dos favoritos",viewDetails:"Ver detalhes",status:{completed:"Concluído",failed:"Falhou",stopped:"Parado"},toast:{source3mfAttached:"Arquivo de origem 3MF anexado: {{filename}}",failedUploadSource3mf:"Falha ao enviar arquivo de origem 3MF",source3mfRemoved:"Arquivo de origem 3MF removido",failedRemoveSource3mf:"Falha ao remover arquivo de origem 3MF",f3dAttached:"F3D anexado: {{filename}}",failedUploadF3d:"Falha ao enviar F3D",f3dRemoved:"F3D removido",failedRemoveF3d:"Falha ao remover F3D",timelapseAttached:"Timelapse anexado: {{filename}}",timelapseAlreadyAttached:"Timelapse já anexado",noMatchingTimelapse:"Nenhum timelapse correspondente encontrado",failedScanTimelapse:"Falha ao escanear timelapse",failedAttachTimelapse:"Falha ao anexar timelapse",timelapseRemoved:"Timelapse removido",failedRemoveTimelapse:"Falha ao remover timelapse",timelapseUploaded:"Timelapse enviado: {{filename}}",failedUploadTimelapse:"Falha ao enviar timelapse",archiveDeleted:"Arquivo excluído",failedDeleteArchive:"Falha ao excluir arquivo",addedToFavorites:"Adicionado aos favoritos",removedFromFavorites:"Removido dos favoritos",projectUpdated:"Projeto atualizado",failedUpdateProject:"Falha ao atualizar projeto",linkCopied:"Link copiado para a área de transferência",failedCopyLink:"Falha ao copiar link",photoDeleted:"Foto excluída",failedDeletePhoto:"Falha ao excluir foto",failedDeleteArchives:"Falha ao excluir arquivos",failedUpdateFavorites:"Falha ao atualizar favoritos",exportDownloaded:"Exportação baixada",exportFailed:"Falha na exportação"},menu:{print:"Imprimir",schedule:"Agendar",openInBambuStudio:"Abrir no Slicer",slice:"Fatiar",externalLink:"Link externo",viewOnMakerWorld:"Ver no MakerWorld",preview3d:"Pré-visualização 3D",viewTimelapse:"Ver Timelapse",scanForTimelapse:"Escanear Timelapse",uploadTimelapse:"Enviar Timelapse",removeTimelapse:"Remover Timelapse",downloadSource3mf:"Baixar Source 3MF",uploadSource3mf:"Enviar Source 3MF",replaceSource3mf:"Substituir Source 3MF",removeSource3mf:"Remover Source 3MF",uploadF3d:"Enviar F3D",replaceF3d:"Substituir F3D",downloadF3d:"Baixar F3D",removeF3d:"Remover F3D",download:"Baixar",copyDownloadLink:"Copiar link de download",qrCode:"Qr Code",viewPhotos:"Ver fotos",viewPhotosCount:"Ver fotos ({{count}})",projectPage:"Página do projeto",addToFavorites:"Adicionar aos favoritos",removeFromFavorites:"Remover dos favoritos",edit:"Editar",printLog:"Histórico de impressões",goToProject:"Ir para o projeto: {{name}}",addToProject:"Adicionar ao projeto",removeFromProject:"Remover do projeto",loading:"Carregando...",noProjectsAvailable:"Nenhum projeto disponível",searchProjects:"Pesquisar projetos…",select:"Selecionar",deselect:"Desmarcar",delete:"Excluir"},permission:{noReprint:"Você não tem permissão para reimprimir este arquivo",noAddToQueue:"Você não tem permissão para adicionar à fila",noUpdateArchives:"Você não tem permissão para atualizar arquivos",noUploadFiles:"Você não tem permissão para enviar arquivos",noDownload:"Você não tem permissão para baixar arquivos",noCopyLink:"Você não tem permissão para copiar links de download",noDelete:"Você não tem permissão para excluir este arquivo",noCreate:"Você não tem permissão para criar arquivos"},platePicker:{title:"Selecione a placa para visualizar",hint:"Este arquivo contém várias placas. Escolha uma para abrir no visualizador GCode.",plateLabel:"Placa {{index}}",objectCount:"{{count}} objeto",objectCount_plural:"{{count}} objetos",noGcode:"Este arquivo não contém G-code fatiado para visualizar. Abra-o no Bambu Studio para fatiar primeiro."},card:{previousPlate:"Placa anterior",nextPlate:"Próxima placa",plateNumber:"Placa {{index}}",moreOptions:"Clique com o botão direito para mais opções",addToFavorites:"Adicionar aos favoritos",removeFromFavorites:"Remover dos favoritos",cancelled:"cancelado",failed:"falha",duplicate:"duplicado",duplicateTitle:"Este modelo já foi impresso antes",openSource3mf:"Abrir source 3MF no Bambu Studio (clique com o botão direito para mais opções)",downloadF3d:"Baixar arquivo de design do Fusion 360",viewTimelapse:"Ver timelapse",viewPhoto:"Ver 1 foto",viewPhotos:"Ver {{count}} fotos",openFolder:"Abrir pasta: {{name}}",slicedFile:"Arquivo fatiado - pronto para imprimir",sourceFile:"Apenas arquivo fonte - nenhum mapeamento AMS disponível",gcode:"GCODE",source:"SOURCE",project:"Projeto: {{name}}",runsBadge:"{{count}} impressões",runsBadgeTitle:"{{count}} impressões no total — {{successful}} bem-sucedidas, {{failed}} com falha. Clique para ver o histórico completo.",estimated:"Estimado: {{time}}",actual:"Real: {{time}}",accuracy:"Precisão: {{percent}}%",filament:"{{weight}} g",layer:"{{count}} camada",layers:"{{count}} camadas",object:"{{count}} objeto",objects:"{{count}} objetos",slicedFor:"Fatiado para {{model}}",uploadedBy:"Enviado por",noPermissionReprint:"Você não tem permissão para reimprimir",noFileForReprint:"Nenhum arquivo 3MF disponível — o arquivo não pôde ser baixado da impressora quando a impressão foi registrada",noPermissionEdit:"Você não tem permissão para editar arquivos",noPermissionDelete:"Você não tem permissão para excluir arquivos",reprint:"Reimprimir",schedulePrint:"Agendar impressão",schedule:"Agendar",openInBambuStudio:"Abrir no Bambu Studio",openInBambuStudioToSlice:"Abrir no Bambu Studio para fatiar",slice:"Fatiar",externalLink:"Link externo",makerWorld:"MakerWorld – {{designer}}",viewProject:"Ver projeto",noExternalLink:"Nenhum link externo",preview3d:"Visualização 3D",download:"Baixar",edit:"Editar",delete:"Excluir"},runLog:{title:"Histórico de impressões",modalTitle:"Histórico de impressões — {{name}}",modalTitleFallback:"este arquivo",empty:"Nenhum evento de impressão registrado para este arquivo ainda.",col:{date:"Data",status:"Status",duration:"Duração",filament:"Filamento",cost:"Custo"},status:{completed:"Concluída",failed:"Falhou",cancelled:"Cancelada",stopped:"Interrompida",skipped:"Ignorada",printing:"Imprimindo"}},modal:{deleteArchive:"Excluir Arquivo",deleteConfirm:'Tem certeza de que deseja excluir "{{name}}"? Esta ação não pode ser desfeita.',deleteButton:"Excluir",deletePurgeStats:"Remover também esta impressão das Quick Stats (filamento, tempo, custo, energia)",removeSource3mf:"Remover Source 3MF",removeSource3mfConfirm:'Tem certeza de que deseja remover o arquivo source 3MF de "{{name}}"? Isso excluirá o arquivo original do projeto do fatiador.',removeButton:"Remover",removeF3d:"Remover F3D",removeF3dConfirm:'Tem certeza de que deseja remover o arquivo de design do Fusion 360 de "{{name}}"?',removeTimelapse:"Remover Timelapse",removeTimelapseConfirm:'Tem certeza de que deseja remover o vídeo timelapse de "{{name}}"?',timelapse:"{{name}} – Timelapse",selectTimelapse:"Selecionar Timelapse",selectTimelapseDesc:"Nenhuma correspondência automática encontrada. Selecione o timelapse para esta impressão:",deleteArchives:"Excluir Arquivos",deleteArchivesConfirm:"Tem certeza de que deseja excluir {{count}} arquivo(s)? Esta ação não pode ser desfeita.",deleteCount:"Excluir {{count}}"},page:{title:"Arquivos",printsCount:"{{filtered}} de {{total}} impressões",dropFilesHere:"Solte arquivos .3mf aqui",releaseToUpload:"Solte para enviar",only3mfSupported:"Apenas arquivos .3mf são suportados",close:"Fechar",selected:"{{count}} selecionado(s)",selectAll:"Selecionar Todos",tags:"Etiquetas",project:"Projeto",favorite:"Favorito",delete:"Excluir",toggledFavorites:"Favoritos alternados para {{count}} arquivo(s)",failedUpdateFavorites:"Falha ao atualizar favoritos",archivesDeleted:"{{count}} arquivo(s) excluído(s)",failedDeleteArchives:"Falha ao excluir arquivos",photoDeleted:"Foto excluída",failedDeletePhoto:"Falha ao excluir foto"},list:{name:"Nome",printer:"Impressora",date:"Data",size:"Tamanho",actions:"Ações",hasTimelapse:"Possui timelapse"},log:{date:"Data",printName:"Nome da Impressão",printer:"Impressora",user:"Usuário",status:"Status",duration:"Duração",filament:"Filamento",allPrinters:"Todas as Impressoras",allUsers:"Todos os Usuários",allStatuses:"Todos os Status",cancelled:"Cancelado",skipped:"Ignorado",dateFrom:"De",dateTo:"Até",noEntries:"Nenhuma entrada de registro de impressão encontrada",showing:"Mostrando {{count}} de {{total}} entradas",rowsPerPage:"Linhas",page:"Página",prev:"Anterior",next:"Próxima",clearLog:"Limpar Registro",clearLogTitle:"Limpar Registro de Impressão",clearLogConfirm:"Todas as entradas do registro de impressão serão permanentemente excluídas. Arquivos e itens da fila não serão afetados. Esta ação não pode ser desfeita. Tem certeza?",clearLogButton:"Limpar Tudo",cleared:"{{count}} entradas do registro de impressão limpas",clearFailed:"Falha ao limpar o registro de impressão"}},queue:{filamentShort:{rowBadge:"Filamento insuficiente para a bobina atribuida",rowTooltip:"O escalonador sinalizou este item. Clique em Play para ver o deficit por slot e decidir se quer imprimir mesmo assim.",confirmTitle:"Filamento insuficiente",confirmIntro:"A bobina atribuida nao pode cobrir pelo menos um slot. Imprimir mesmo assim?",lineItem:"Slot {{slot}}: precisa de {{required}} g, restam {{remaining}} g",unknown:"desconhecido",printAnyway:"Imprimir mesmo assim"},title:"Fila de Impressão",subtitle:"Agende e gerencie seus trabalhos de impressão",addToQueue:"Adicionar à Fila",print:"Imprimir",reprint:"Reimprimir",schedulePrint:"Agendar Impressão",editQueueItem:"Editar Item da Fila",printToPrinters:"Imprimir para {{count}} Impressoras",queueToPrinters:"Adicionar à Fila para {{count}} Impressoras",queueSelectedPlates:"Adicionar {{count}} placas à fila",selectAllPlates:"Selecionar todas as {{count}} placas",deselectAll:"Desmarcar tudo",printQueued:"Impressão adicionada à fila",itemsQueued:"{{count}} itens adicionados à fila",sending:"Enviando...",sendingProgress:"Enviando {{current}}/{{total}}...",adding:"Adicionando...",addingProgress:"Adicionando {{current}}/{{total}}...",savingProgress:"Salvando {{current}}/{{total}}...",clearQueue:"Limpar Fila",clearHistory:"Limpar Histórico",emptyQueue:"Fila vazia",position:"Posição",scheduledTime:"Hora Agendada",moveUp:"Mover para Cima",moveDown:"Mover para Baixo",startNow:"Iniciar Agora",printingInProgress:"Impressão em andamento...",viewArchive:"Ver Arquivo",viewInFileManager:"Ver no Gerenciador de Arquivos",itemCount:"{{count}} item",itemCount_plural:"{{count}} itens",dragToReorder:"Arraste para reordenar (apenas ASAP)",reorderHint:"A posição afeta apenas itens ASAP. Itens agendados são executados no horário definido.",sjf:{label:"SJF",tooltip:"Trabalho mais curto primeiro — o agendador prioriza impressões mais curtas"},addedBy:"Adicionado por {{name}}",nextInQueue:"Próximo na fila",clearPlateSuccess:"Placa limpa — pronta para a próxima impressão",plateNumber:"Placa {{index}}",quantity:"Quantidade",quantityHint:"Cria {{count}} itens na fila",activeBatches:"Lotes ativos",batchProgress:"{{completed}} de {{total}} concluídos",cancelBatch:"Cancelar restantes",batchCancelled:"Itens restantes do lote cancelados",cancelBatchConfirmTitle:"Cancelar lote",cancelBatchConfirmMessage:"Cancelar todos os itens pendentes restantes neste lote?",batch:"Lote",sections:{currentlyPrinting:"Imprimindo Atualmente",queued:"Na Fila",history:"Histórico"},status:{pending:"Pendente",waiting:"Aguardando",printing:"Imprimindo",paused:"Pausado",completed:"Concluído",failed:"Falhou",skipped:"Ignorado",cancelled:"Cancelado"},summary:{printing:"Imprimindo",queued:"Na Fila",totalTime:"Tempo Total da Fila",totalWeight:"Peso Total da Fila",history:"Histórico"},filter:{allPrinters:"Todas as Impressoras",unassigned:"Não Atribuído",allStatus:"Todos os Status",allLocations:"Todos os Locais",any:"Qualquer"},sort:{byPosition:"Ordenar por Posição",byName:"Ordenar por Nome",byPrinter:"Ordenar por Impressora",bySchedule:"Ordenar por Agendamento",byDate:"Ordenar por Data",ascendingOldest:"Crescente (mais antigo primeiro)",descendingNewest:"Decrescente (mais recente primeiro)"},badges:{staged:"Preparado (início manual)",requiresPrevious:"Requer sucesso anterior",autoPowerOff:"Desligamento automático",gcodeInjection:"G-code"},empty:{title:"Nenhuma impressão agendada",description:'Agende uma impressão a partir da página de Arquivos usando a opção "Agendar" no menu de contexto, ou arraste e solte arquivos para começar.'},time:{asap:"ASAP",overdue:"Atrasado",now:"Agora",lessThanMinute:"Em menos de um minuto",inMinutes:"Em {{count}} min",inHours:"Em {{count}} horas"},actions:{stopPrint:"Parar Impressão",startPrint:"Iniciar Impressão",requeue:"Reenfileirar"},bulkEdit:{title:"Editar {{count}} Item",title_plural:"Editar {{count}} Itens",description:"Apenas as configurações alteradas serão aplicadas aos itens selecionados.",printer:"Impressora",noChange:"— Sem alterações —",queueOptions:"Opções de Fila",staged:"Preparado (início manual)",autoPowerOff:"Desligamento automático após impressão",requirePrevious:"Requer sucesso anterior",printOptions:"Opções de Impressão",bedLevelling:"Nivelamento da Mesa",flowCalibration:"Calibração de Fluxo",vibrationCalibration:"Calibração de Vibração",layerInspection:"Inspeção da Primeira Camada",timelapse:"Timelapse",useAms:"Usar AMS",applyChanges:"Aplicar Alterações",selectAll:"Selecionar Todos",deselectAll:"Desmarcar Todos",selected:"{{count}} selecionado(s)",editSelected:"Editar Selecionados",cancelSelected:"Cancelar Selecionados"},confirm:{cancelTitle:"Cancelar Impressão Agendada",cancelMessage:'Tem certeza de que deseja cancelar "{{name}}"?',stopTitle:"Parar Impressão",stopMessage:'Tem certeza de que deseja parar a impressão atual "{{name}}"? Isso cancelará o trabalho de impressão na impressora.',removeTitle:"Remover do Histórico",removeMessage:'Tem certeza de que deseja remover "{{name}}" do histórico da fila?',clearHistoryTitle:"Limpar Histórico",clearHistoryMessage:"Tem certeza de que deseja remover todos os {{count}} itens do histórico?",cancelButton:"Cancelar Impressão",stopButton:"Parar Impressão",thisPrint:"esta impressão",thisItem:"este item"},toast:{cancelled:"Item da fila cancelado",cancelFailed:"Falha ao cancelar item",removed:"Item da fila removido",removeFailed:"Falha ao remover item",stopped:"Impressão parada",stopFailed:"Falha ao parar impressão",released:"Impressão liberada para a fila",startFailed:"Falha ao iniciar impressão",reorderFailed:"Falha ao reordenar fila",historyCleared:"Limpar {{count}} item(s) do histórico",clearHistoryFailed:"Falha ao limpar histórico",updateFailed:"Falha ao atualizar itens",bulkCancelled:"Cancelado {{count}} item(s)",bulkCancelFailed:"Falha ao cancelar itens"},timeline:{listView:"Lista",timelineView:"Linha do tempo",unassigned:"Não atribuído",noData:"Nenhuma impressão agendada para este dia",allDoneBy:"Todas as impressões concluídas até {{time}}",staged:"Preparado",filterAll:"Mostrar tudo",filterPrinting:"Imprimindo",filterQueued:"Na fila",time:{anyMoment:"a qualquer momento",minutesLeft:"{{minutes}}m restantes",hoursLeft:"{{hours}}h restantes",hoursMinutesLeft:"{{hours}}h {{minutes}}m restantes"},day:{previous:"Dia anterior",next:"Próximo dia",today:"Hoje"}},permissions:{noStopPrint:"Você não tem permissão para parar impressões",noStartPrint:"Você não tem permissão para iniciar impressões",noEdit:"Você não tem permissão para editar este item da fila",noCancel:"Você não tem permissão para cancelar este item da fila",noRequeue:"Você não tem permissão para reenfileirar itens",noRemove:"Você não tem permissão para remover este item da fila",noClearHistory:"Você não tem permissão para limpar todo o histórico",noEditItems:"Você não tem permissão para editar itens da fila",noCancelItems:"Você não tem permissão para cancelar itens da fila"}},backgroundDispatch:{unknownFile:"Arquivo desconhecido",unknownPrinter:"Impressora desconhecida",startingPrints:"Iniciando impressões",progressSummary:"{{complete}}/{{total}} concluídos • Despachados: {{dispatched}} • Processando: {{processing}}",expandDetails:"Expand dispatch details",collapseDetails:"Collapse dispatch details",dismissToast:"Dispensar notificação de despacho",cancelDispatchJob:"Cancelar despacho",cancel:"Cancelar",cancelling:"Cancelando…",awaitingPrinter:"Aguardando impressora…",status:{dispatched:"Despachado",processing:"Processando",completed:"Concluído",failed:"Falhou",cancelled:"Cancelado"},toast:{cancellingUpload:"Cancelling upload...",cancelled:"Despacho cancelado",cancelFailed:"Falha ao cancelar despacho",completeWithFailures:"Despacho em segundo plano concluído: {{completed}} sucesso(s), {{failed}} falha(s)",completeSuccess:"Despacho em segundo plano concluído: {{completed}} sucesso(s)",printStartedRemaining:"{{completed}} impressão(ões) iniciada(s), {{remaining}} enviando..."}},stats:{title:"Estatísticas",subtitle:"Arraste os widgets para reorganizar. Clique no ícone de olho para ocultar.",overview:"Visão Geral",totalPrints:"Total de Impressões",successRate:"Taxa de Sucesso",totalPrintTime:"Tempo Total de Impressão",printTime:"Tempo de Impressão",totalFilament:"Filamento Total Utilizado",filamentUsed:"Filamento Utilizado",filamentCost:"Custo do Filamento",totalCost:"Custo Total",energyUsed:"Energia Utilizada",energyCost:"Custo da Energia",energyWarmingUpTooltip:"O monitoramento de energia ainda está coletando snapshots por hora. Os totais por período ficarão precisos quando houver pelo menos um snapshot antes do intervalo selecionado. Valores iniciais podem ser subestimados.",averagePrintTime:"Tempo Médio de Impressão",printsPerDay:"Impressões por Dia",byPrinter:"Por Impressora",printsByPrinter:"Impressões por Impressora",byMaterial:"Por Material",byMonth:"Por Mês",last7Days:"Últimos 7 Dias",last30Days:"Últimos 30 Dias",last90Days:"Últimos 90 Dias",allTime:"Todo o Tempo",quickStats:"Estatísticas Rápidas",printActivity:"Atividade de Impressão",filamentTypes:"Tipos de Filamento",filamentTrends:"Tendências de Filamento",failureAnalysis:"Análise de Falhas",timeAccuracy:"Precisão do Tempo",successful:"Bem-sucedido:",failed:"Falhou:",cancelled:"Cancelado:",perfectEstimate:"100% = estimativa perfeita",noTimeAccuracyData:"Nenhum dado de precisão de tempo disponível",noFilamentData:"Nenhum dado de filamento disponível",noPrinterData:"Nenhum dado de impressora disponível",noPrintData:"Nenhum dado de impressão disponível",noPrintDataLast30Days:"Nenhum dado de impressão nos últimos 30 dias",failureReasons:"Razões de Falha",topFailureReasons:"Principais Razões de Falha",failedPrintsCount:"{{failed}} / {{total}} impressões falharam",lastWeekRate:"Última semana: {{rate}}%",resetLayout:"Redefinir Layout",recalculateCosts:"Recalcular Custos",recalculateCostsHint:"Recalcular todos os custos do arquivo usando os preços atuais do filamento",exportStats:"Exportar Estatísticas",exportAsCsv:"Exportar como CSV",exportAsExcel:"Exportar como Excel",hiddenCount:"{{count}} Oculto",exportDownloaded:"Exportação baixada",exportFailed:"Falha na exportação",layoutReset:"Layout redefinido",recalculatedCosts:"Custos recalculados para {{count}} arquivos",recalculateFailed:"Falha ao recalcular custos",loadingStats:"Carregando estatísticas...",noPermissionResetLayout:"Você não tem permissão para redefinir o layout",noPermissionRecalculate:"Você não tem permissão para recalcular custos",noPrintDataInRange:"Sem dados no período selecionado",periodFilament:"Filamento usado",periodCost:"Custo",avgPerPrint:"Média por impressão",usageOverTime:"Uso ao longo do tempo",filamentByWeight:"Peso",printDuration:"Duração da impressão",printerUtilization:"Utilização da impressora",filamentSuccess:"Sucesso por material",printHabits:"Hábitos de impressão",printTimeOfDay:"Horário de impressão",colorDistribution:"Distribuição de cores",noColorData:"Nenhum dado de cor disponível",records:"Recordes",longestPrint:"Impressão mais longa",heaviestPrint:"Impressão mais pesada",mostExpensivePrint:"Mais cara",busiestDay:"Dia mais movimentado",successStreak:"Sequência de sucesso",streakPrint:"impressão consecutiva",streakPrints:"{{count}} impressões consecutivas",printerStats:"Estatísticas da impressora",hours:"horas",avgPrints:"Méd. impressões",noArchiveData:"Nenhum dado de impressão disponível",filamentByTime:"Tempo",avgWeight:"Méd. peso",avgTime:"Méd. tempo",filamentByPrints:"Impressões",timeframe:{today:"Hoje","this-week":"Esta semana","this-month":"Este mês","last-7":"Últimos 7 dias","last-30":"Últimos 30 dias","last-90":"Últimos 90 dias","this-year":"Este ano","all-time":"Todo o período",custom:"Personalizado",from:"De",to:"Até"},allUsers:"Todos os Usuários",noUser:"Sem Usuário (Sistema)",filterByUser:"Filtrar por Usuário"},maintenance:{title:"Manutenção",overview:"Visão Geral",allOk:"Todas as manutenções estão em dia",dueCount:"{{count}} item pendente",dueCount_plural:"{{count}} itens pendentes",warningCount:"{{count}} aviso",warningCount_plural:"{{count}} avisos",totalPrintTime:"Tempo Total de Impressão",nextMaintenance:"Próxima Manutenção",nothingDue:"Nada pendente",tasks:"Tarefas",lastPerformed:"Última execução",interval:"Intervalo",hoursRemaining:"{{hours}}h restantes",hoursOverdue:"{{hours}}h atrasadas",markDone:"Marcar como Concluída",performMaintenance:"Realizar Manutenção",history:"Histórico",noHistory:"Nenhum histórico de manutenção",editPrintHours:"Editar Horas de Impressão",currentHours:"Horas Atuais",statusTab:"Status",settingsTab:"Configurações",overdueCount:"{{count}} atrasado",dueSoonCount:"{{count}} prestes a vencer",dueSoon:"Prestes a vencer",allGood:"Tudo certo",overdueBy:"Atrasado por {{duration}}",dueIn:"Vence em {{duration}}",timeLeft:"{{duration}} restantes",day:"1 dia",days:"{{count}} dias",week:"1 semana",weeks:"{{count}} semanas",month:"1 mês",months:"{{count}} meses",year:"1 ano",maintenanceTypes:"Tipos de Manutenção",maintenanceTypesDescription:"Tipos de sistema e suas tarefas de manutenção personalizadas",addCustomType:"Adicionar Tipo Personalizado",restoreDefaults:"Restaurar Tarefas Padrão",intervalType:"Tipo de Intervalo",intervalValue:"Intervalo ({{type}})",icon:"Ícone",documentationLink:"Link da Documentação (opcional)",assignToPrinters:"Atribuir a Impressoras",selectAtLeastOnePrinter:"Selecione pelo menos uma impressora",addType:"Adicionar Tipo",custom:"Personalizado",printHours:"Horas de Impressão",calendarDays:"Dias de Calendário",exampleName:"ex., Substituir Filtro HEPA",viewDocumentation:"Ver documentação",timeBasedInterval:"Intervalo baseado em tempo",intervalOverrides:"Substituições de Intervalo",intervalOverridesDescription:"Personalize os intervalos para impressoras específicas",assignedToPrinters:"Atribuído a impressoras:",noPrintersAssigned:"Nenhuma impressora atribuída",addPrinterShort:"Adicionar:",printersAssignedClick:"{{count}} impressora(s) atribuída(s) - clique para gerenciar",removeFromPrinter:"Remover desta impressora",types:{lubricateCarbonRods:"Lubricar Barras de Carbono",lubricateRails:"Lubricar Trilhos Lineares",cleanNozzle:"Limpar Bico/Hotend",checkBelts:"Verificar Tensão das Correias",cleanBuildPlate:"Limpar Plataforma de Impressão",checkExtruder:"Verificar Engrenagens do Extrusor",checkCooling:"Verificar Ventiladores de Resfriamento",generalInspection:"Inspeção Geral",cleanCarbonRods:"Limpar Barras de Carbono",lubricateSteelRods:"Lubrificar Barras de Aço",cleanSteelRods:"Limpar Barras de Aço",cleanLinearRails:"Limpar Trilhos Lineares",checkPtfeTube:"Verificar Tubo PTFE",replaceHepaFilter:"Substituir Filtro HEPA",replaceCarbonFilter:"Substituir Filtro de Carbono",lubricateLeftNozzleRail:"Lubrificar Trilho do Bico Esquerdo"},maintenanceComplete:"Manutenção marcada como concluída",typeUpdated:"Tipo de manutenção atualizado",typeDeleted:"Tipo de manutenção excluído",defaultsRestored:"Restauradas {{count}} tarefa(s) padrão",printHoursUpdated:"Horas de impressão atualizadas",printerAssigned:"Impressora atribuída",printerRemoved:"Impressora removida",deleteTypeConfirm:'Excluir "{{name}}"?',deleteSystemTypeTitle:"Excluir tarefa de manutenção padrão?",deleteSystemTypeMessage:'Tem certeza de que deseja excluir a tarefa de manutenção padrão "{{name}}"?',noPermissionUpdate:"Você não tem permissão para atualizar itens de manutenção",noPermissionPerform:"Você não tem permissão para realizar manutenção",noPermissionEditTypes:"Você não tem permissão para editar tipos de manutenção",noPermissionDeleteTypes:"Você não tem permissão para excluir tipos de manutenção",noPermissionEditHours:"Você não tem permissão para editar horas de impressão",noPermissionRemovePrinter:"Você não tem permissão para remover atribuições de impressora",noPermissionAssignPrinter:"Você não tem permissão para atribuir impressoras",noPermissionEditIntervals:"Você não tem permissão para editar intervalos",configureSettings:"Configure tipos de manutenção e intervalos"},settings:{title:"Configurações",general:"Geral",tabs:{general:"Geral",smartPlugs:"Tomadas Inteligentes",notifications:"Notificações",queue:"Fluxo",filament:"Filamento",network:"Rede",apiKeys:"Chaves API",virtualPrinter:"Impressora Virtual",failureDetection:"Detecção de Falhas",users:"Autenticação",backup:"Backup",emailAuth:"Autenticação por Email",ldap:"LDAP",twoFa:"Autenticação 2FA",oidc:"SSO / OIDC",security:"Segurança",spoolbuddy:"SpoolBuddy"},ldap:{title:"Autenticação LDAP",enabledDesc:"A autenticação LDAP está ativada",disabledDesc:"A autenticação LDAP está desativada",disabledHint:"Configure e salve as configurações LDAP abaixo, depois ative.",enabled:"Autenticação LDAP ativada",disabled:"Autenticação LDAP desativada",feature1:"Usuários podem fazer login com credenciais LDAP",feature2:"A conta de administrador local permanece como fallback",feature3:"Grupos LDAP são mapeados para grupos BamBuddy no login",serverConfig:"Configuração do Servidor LDAP",serverUrl:"URL do servidor",serverUrlHint:"Use ldap:// para padrão ou ldaps:// para conexões SSL",security:"Segurança",securityHint:"StartTLS atualiza uma conexão simples para TLS. LDAPS usa TLS desde o início.",bindDn:"Bind DN (conta de serviço)",bindPassword:"Senha Bind",searchBase:"Base DN de pesquisa",userFilter:"Filtro de pesquisa de usuário",userFilterHint:"{username} é substituído pelo nome de usuário. Use (uid={username}) para OpenLDAP.",advanced:"Avançado",autoProvision:"Provisionamento automático de usuários",autoProvisionHint:"Criar automaticamente uma conta BamBuddy no primeiro login LDAP",defaultGroup:"Grupo padrão",defaultGroupNone:"— Nenhum (sem fallback) —",defaultGroupHint:"Grupo de fallback atribuído quando um usuário LDAP se autentica mas não está em nenhum grupo LDAP mapeado. Deixe vazio para manter usuários não mapeados sem permissões.",groupMapping:"Mapeamento de grupos (JSON)",groupMappingHint:"Mapear DNs de grupos LDAP para grupos BamBuddy. Grupos disponíveis: ",testConnection:"Testar conexão",settingsSaved:"Configurações LDAP salvas",errors:{serverRequired:"URL do servidor LDAP é obrigatória",searchBaseRequired:"Base DN de pesquisa é obrigatória",enableAuthFirst:"Ative a autenticação primeiro",configureLdapFirst:"Salve as configurações LDAP primeiro"}},email:{smtpSettings:"Configuração SMTP",smtpHost:"Servidor SMTP",smtpPort:"Porta SMTP",security:"Segurança",authentication:"Autenticação",username:"Nome de Usuário",password:"Senha",fromEmail:"Email de Remetente",fromName:"Nome de Remetente",testConnection:"Testar Conexão SMTP",testRecipient:"Email de Teste",sendTest:"Enviar Email de Teste",sending:"Enviando...",save:"Salvar Configurações",saving:"Salvando...",advancedAuth:"Autenticação Avançada",advancedAuthEnabled:"Autenticação Avançada está habilitada",advancedAuthEnabledDesc:"Recursos de gerenciamento de usuários baseados em email estão ativos. Novos usuários receberão senhas geradas automaticamente por email, e os usuários podem redefinir suas senhas através do recurso de esqueci minha senha.",advancedAuthDisabled:"Autenticação Avançada está desabilitada",advancedAuthDisabledDesc:"Habilite a autenticação avançada para ativar recursos baseados em email para gerenciamento de usuários.",enable:"Habilitar",disable:"Desabilitar",feature1:"Senhas são geradas automaticamente e enviadas por email para novos usuários",feature2:"Usuários podem fazer login com nome de usuário ou email",feature3:"Recurso de esqueci minha senha está disponível",feature4:"Administradores podem redefinir senhas de usuários via email",errors:{requiredFields:"Por favor, preencha todos os campos obrigatórios",usernameRequired:"Nome de usuário é obrigatório quando a autenticação está habilitada",enterTestEmail:"Por favor, insira um endereço de email de teste",smtpServerAndEmail:"Por favor, preencha o servidor SMTP e o email de remetente antes de testar",usernamePasswordRequired:"Nome de usuário e senha são obrigatórios quando a autenticação está habilitada",configureSmtpFirst:"Por favor, configure e teste as configurações SMTP primeiro",enableAuthFirst:"Por favor, habilite a autenticação primeiro para usar os recursos baseados em e-mail."},success:{settingsSaved:"Configurações SMTP salvas com sucesso"},securityOptions:{starttls:"STARTTLS (Porta 587)",ssl:"SSL/TLS (Porta 465)",none:"Nenhuma (Porta 25)"},authOptions:{enabled:"Habilitado",disabled:"Desabilitado"}},appearance:"Aparência",notifications:"Notificações",smartPlugs:"Tomadas Inteligentes",spoolman:"Spoolman",updates:"Atualizações",language:"Idioma",languageDescription:"Selecione seu idioma preferido",theme:"Tema",themeLight:"Claro",themeDark:"Escuro",themeSystem:"Sistema",defaultView:"Visualização Padrão",defaultViewDescription:"Página a ser exibida ao abrir o aplicativo",checkForUpdates:"Verificar Atualizações",autoUpdate:"Atualização Automática",currentVersion:"Versão Atual",latestVersion:"Última Versão",upToDate:"Você está atualizado",updateAvailable:"Atualização disponível",notificationLanguage:"Idioma das Notificações",notificationLanguageDescription:"Idioma para notificações push",bedCooledThreshold:"Limite de Resfriamento da Cama",bedCooledThresholdDescription:"Temperatura abaixo da qual a cama é considerada resfriada após uma impressão",userNotificationsEnabled:"Notificações do Usuário",userNotificationsEnabledDescription:"Ativa o menu de notificações do usuário e notificações por e-mail para eventos de impressão. Requer Autenticação Avançada.",userNotificationsDisabledHint:"Ative a Autenticação Avançada para usar as notificações do usuário.",notificationProviders:"Provedores de Notificação",addProvider:"Adicionar Provedor",editProvider:"Editar Provedor",providerType:"Tipo de Provedor",testNotification:"Testar Notificação",testSuccess:"Notificação de teste enviada com sucesso",testFailed:"Falha ao enviar notificação de teste",quietHours:"Horas de Silêncio",quietHoursDescription:"Não perturbe durante essas horas",quietHoursStart:"Início",quietHoursEnd:"Fim",events:{title:"Eventos de Notificação",printStart:"Impressão Iniciada",printComplete:"Impressão Concluída",printFailed:"Falha na Impressão",printStopped:"Impressão Interrompida",printProgress:"Marcos de Progresso",printProgressDescription:"Notificar em 25%, 50%, 75%",printerOffline:"Impressora Offline",printerError:"Erro na Impressora",filamentLow:"Filamento Baixo",maintenanceDue:"Manutenção Pendente",maintenanceDueDescription:"Notificar quando a manutenção for necessária"},smartPlug:{title:"Tomadas Inteligentes",add:"Adicionar Tomada Inteligente",edit:"Editar Tomada Inteligente",name:"Nome",ipAddress:"Endereço IP",linkedPrinter:"Impressora Vinculada",autoOn:"Ligar Automaticamente",autoOnDescription:"Ligar quando a impressão começar",autoOff:"Desligar Automaticamente",autoOffDescription:"Desligar após a conclusão da impressão",offDelay:"Atraso para Desligar",offDelayMinutes:"Minutos após a impressão",offDelayTemp:"Quando o bico estiver abaixo da temperatura",currentState:"Estado Atual",turnOn:"Ligar",turnOff:"Desligar"},filamentTracking:"Rastreamento de Filamento",filamentTrackingDesc:"Escolha como rastrear seus rolos de filamento. Você pode usar o inventário interno ou conectar a um servidor Spoolman externo.",filamentChecks:"Verificações de filamento",disableFilamentWarnings:"Desativar avisos de filamento",disableFilamentWarningsDesc:"Não mostrar avisos sobre filamento insuficiente ao imprimir ou adicionar à fila",preferLowestFilament:"Preferir filamento com menor resto",preferLowestFilamentDesc:"Quando vários carretéis correspondem, usar o com menos filamento restante",trackingModeBuiltIn:"Inventário Interno",trackingModeBuiltInDesc:"Correspondência automática de RFID e rastreamento de uso incluídos",trackingModeSpoolmanDesc:"Servidor de gerenciamento de filamento externo",builtInFeatureRfid:"Detecta automaticamente rolos RFID da Bambu Lab no AMS",builtInFeatureUsage:"Rastreia o consumo de filamento por impressão",builtInFeatureCatalog:"Gerencia rolos, cores e perfis de fator K",builtInFeatureThirdParty:"Rolos de terceiros podem ser atribuídos aos rolos do inventário",amsSyncButton:"Sincronizar Pesos do AMS",amsSyncTitle:"Sincronizar Pesos dos Rolos do AMS",amsSyncMessage:"Isso substituirá todos os pesos dos rolos do inventário pelos valores atuais de % restante do AMS das impressoras conectadas. Use isso para recuperar dados de peso corrompidos. As impressoras devem estar online.",amsSyncing:"Sincronizando...",amsSyncSuccess:"{{synced}} rolo(s) sincronizado(s), {{skipped}} ignorado(s)",amsSyncError:"Falha ao sincronizar pesos do AMS",spoolmanAmsSyncButton:"Sincronizar pesos do Spoolman pelo AMS",spoolmanAmsSyncTitle:"Sincronizar pesos dos rolos Spoolman pelo AMS",spoolmanAmsSyncMessage:"Isso atualizará os pesos de todos os rolos Spoolman com base nos valores atuais de % restante do AMS das impressoras conectadas. As impressoras devem estar online.",spoolmanAmsSyncing:"Sincronizando...",spoolmanAmsSyncSuccess:"{{synced}} rolo(s) Spoolman sincronizado(s), {{skipped}} ignorado(s)",spoolmanAmsSyncError:"Falha ao sincronizar pesos do Spoolman pelo AMS",spoolmanAmsSyncErrorUnreachable:"Falha na sincronização (Spoolman inacessível)",spoolmanAmsSyncErrorNotConfigured:"Falha na sincronização (Spoolman não configurado)",spoolmanNotConfigured:"Spoolman não configurado",spoolmanFilamentCatalogTitle:"Catálogo de filamentos Spoolman",spoolmanFilamentCatalogDesc:"Nomes de filamentos e pesos tara da sua instância Spoolman. Nome e peso do carretel são editáveis aqui; todas as outras propriedades são gerenciadas diretamente no Spoolman.",spoolmanUrl:"Spoolman URL",spoolmanUrlHint:"URL do seu servidor Spoolman (por exemplo, http://localhost:7912)",spoolmanConnected:"Conectado",spoolmanDisconnected:"Desconectado",status:"Status",connect:"Conectar",disconnect:"Desconectar",howSyncWorks:"Como a Sincronização Funciona",syncInfoRfidOnly:"Apenas rolos oficiais da Bambu Lab com RFID são sincronizados",syncInfoAutoCreate:"Novos rolos são criados automaticamente no Spoolman na primeira sincronização",syncInfoThirdPartySkipped:"Rolos não oficiais da Bambu Lab (terceiros, reabastecidos) são ignorados",linkingExistingSpools:"Vinculando Rolos Existentes",linkingExistingSpoolsDesc:'Para vincular rolos existentes do Spoolman ao seu AMS, passe o mouse sobre um slot do AMS e clique em "Vincular ao Spoolman".',syncMode:"Modo de Sincronização",syncModeAuto:"Automático",syncModeManual:"Apenas Manual",syncModeAutoDesc:"Os dados do AMS são sincronizados automaticamente quando alterações são detectadas",syncModeManualDesc:"Somente sincronize quando acionado manualmente",syncAmsData:"Sincronizar Dados do AMS",syncAmsDataDesc:"Sincronize manualmente os dados do AMS da impressora com o Spoolman",allPrinters:"Todas as Impressoras",noDefaultPrinter:"Sem padrão (perguntar a cada vez)",sidebarOrder:"Ordem da barra lateral",saveThumbnails:"Salvar miniaturas",captureFinishPhoto:"Capturar foto de conclusão",noPrintersConfigured:"Nenhuma impressora configurada",archiveMode:{always:"Sempre criar entrada de arquivo",never:"Nunca criar entrada de arquivo",ask:"Perguntar a cada vez"},checkForUpdatesLabel:"Verificar atualizações",checkPrinterFirmware:"Verificar firmware da impressora",includeBetaUpdates:"Incluir versões beta",includeBetaUpdatesDesc:"Notificar sobre versões beta e pré-lançamento ao verificar atualizações",enableRetry:"Habilitar tentativa",homeAssistantDescription:"Controlar tomadas inteligentes via Home Assistant",environmentManagedLabel:"(Gerenciado pelo Ambiente)",autoEnabledViaEnv:"Habilitado automaticamente via variáveis de ambiente",urlFromEnvReadOnly:"Valor definido pela variável de ambiente HA_URL (somente leitura)",tokenFromEnvReadOnly:"Valor definido pela variável de ambiente HA_TOKEN (somente leitura)",mqttConnectedTo:"Conectado a",prometheusDescription:"Expor dados da impressora no formato Prometheus",noSmartPlugsTitle:"Nenhuma tomada inteligente configurada",noSmartPlugsDescription:"Adicione uma tomada inteligente baseada em Tasmota para monitorar o consumo de energia e automatizar o controle de energia.",noProvidersTitle:"Nenhum provedor configurado",noProvidersDescription:"Adicione um provedor para receber alertas.",noTemplatesAvailable:"Nenhum modelo disponível. Reinicie o backend para gerar os modelos padrão.",apiPermissionView:"Visualizar status da impressora e fila",apiPermissionEdit:"Adicionar e remover itens da fila de impressão",apiKeysEmptyTitle:"Nenhuma chave API",apiKeysEmptyDescription:"Crie uma chave API para integrar com serviços externos.",noUsersFound:"Nenhum usuário encontrado",noGroupsFound:"Nenhum grupo encontrado",noGroupsAvailable:"Nenhum grupo disponível",passwordsDoNotMatch:"As senhas não coincidem",systemGroupWarning:"Os nomes dos grupos do sistema não podem ser alterados",authDisabledTitle:"Autenticação Desativada",authDisabledFeature1:"Exigir login para acessar o sistema",authDisabledFeature2:"Criar múltiplos usuários com permissões baseadas em grupos",authDisabledFeature3:"Controlar acesso com mais de 50 permissões granulares",userHasCreated:"Este usuário criou:",userItemsQuestion:"O que você gostaria de fazer com esses itens?",deleteUserConfirm:"Tem certeza de que deseja excluir este usuário?",actionCannotBeUndone:"Esta ação não pode ser desfeita.",addFirstSmartPlug:"Adicione sua primeira tomada inteligente",providers:"Provedores",log:"Registro",testAll:"Testar tudo",testResults:"Resultados do teste",testPassedCount:"{{count}} aprovado",testFailedCount:"{{count}} falhou",messageTemplates:"Modelos de mensagem",messageTemplatesDescription:"Personalize as mensagens de notificação para cada evento.",apiKeys:"Chaves API",apiKeysDescription:"Crie chaves API para integrações externas e webhooks.",createKey:"Criar Chave",apiKeyCreated:"Chave API criada com sucesso",apiKeyCopyWarning:"Copie esta chave agora - ela não será exibida novamente!",useInApiBrowser:"Usar no Navegador API",createNewApiKey:"Criar Nova Chave API",keyName:"Nome da Chave",keyNamePlaceholder:"e.g., Home Assistant, OctoPrint",readStatus:"Status de Leitura",readStatusDescription:"Visualizar status da impressora e fila",manageQueue:"Gerenciar Fila",manageQueueDescription:"Adicionar e remover itens da fila de impressão",controlPrinter:"Controlar Impressora",controlPrinterDescription:"Pausar, retomar e parar impressões",manageLibrary:"Gerenciar biblioteca",manageLibraryDescription:"Enviar, renomear e excluir arquivos da biblioteca; importar modelos do MakerWorld",manageInventory:"Gerenciar estoque",manageInventoryDescription:"Criar, atualizar e excluir bobinas e registros de estoque. Necessário para quiosques SpoolBuddy (escaneamento NFC, leituras da balança, comandos de sistema do quiosque).",libraryBadge:"Biblioteca",inventoryBadge:"Estoque",cloudAccess:"Permitir acesso à nuvem",cloudAccessDescription:"Lê predefinições e filamentos do Bambu Cloud em seu nome. Requer login no Bambu Cloud.",cloudBadge:"Nuvem",updateEnergyCost:"Atualizar preço da eletricidade",updateEnergyCostDescription:"Permitir que esta chave envie POST de um novo preço por kWh para /settings/electricity-price. Útil para automações de tarifa dinâmica do Home Assistant (Tibber, Octopus, etc.). Este é o único campo de configuração gravável via API key.",energyCostBadge:"Energia",legacyKey:"Legado",legacyKeyTooltip:"Criado antes da propriedade por usuário; recrie para acesso à nuvem",unnamedKey:"Chave Sem Nome",lastUsed:"Último uso",read:"Ler",control:"Controlar",createFirstKey:"Crie sua primeira chave",webhookEndpoints:"Endpoints de Webhook",webhookApiKeyHint:"Use sua chave API no cabeçalho X-API-Key.",webhook:{getAllStatus:"Obter status de todas as impressoras",getSpecificStatus:"Obter status de uma impressora específica",addToQueue:"Adicionar à fila de impressão",pausePrint:"Pausar impressão",resumePrint:"Retomar impressão",stopPrint:"Parar impressão"},apiBrowser:"Navegador API",apiBrowserDescription:"Explore e teste todos os endpoints de API disponíveis.",apiKeyForTesting:"Chave API para Teste",apiKeyPlaceholder:"Cole sua chave API aqui para testar endpoints autenticados...",apiKeyHint:"Esta chave será enviada como cabeçalho X-API-Key nas solicitações.",deleteApiKeyTitle:"Excluir Chave API",deleteApiKeyMessage:"Tem certeza de que deseja excluir esta chave API? Quaisquer integrações usando esta chave deixarão de funcionar.",deleteKey:"Excluir Chave",amsDisplayThresholds:"Limiares de Exibição AMS",amsThresholdsDescription:"Configure os limiares de cores para os indicadores de umidade e temperatura do AMS.",humidity:"Umidade",goodGreen:"Bom (verde)",fairOrange:"Razoável (laranja)",aboveFairBad:"Acima do limiar razoável mostra como vermelho (ruim)",fairAlsoDryingThreshold:"Este limiar também é usado para acionar a secagem automática",temperature:"Temperatura",goodBlue:"Bom (azul)",aboveFairHot:"Acima do limiar razoável mostra como vermelho (quente)",historyRetention:"Retenção de Histórico",keepSensorHistory:"Manter histórico do sensor por",historyRetentionDescription:"Dados antigos de umidade e temperatura serão automaticamente excluídos",defaultPrintOptions:"Opções de impressão padrão",defaultPrintOptionsDescription:"Defina valores padrão para opções de impressão. Podem ser alterados no diálogo de impressão.",defaultBedLevelling:"Nivelamento da mesa",defaultBedLevellingDesc:"Nivelar automaticamente a mesa antes da impressão",defaultFlowCali:"Calibração de fluxo",defaultFlowCaliDesc:"Calibrar fluxo de extrusão",defaultVibrationCali:"Calibração de vibração",defaultVibrationCaliDesc:"Reduzir artefatos de ringing",defaultLayerInspect:"Inspeção da primeira camada",defaultLayerInspectDesc:"Inspeção IA da primeira camada",defaultTimelapse:"Timelapse",defaultTimelapseDesc:"Gravar vídeo timelapse",staggeredStart:"Início escalonado",staggeredStartDescription:"Tamanho de grupo e intervalo padrão ao escalonar inícios de lotes multi-impressora. Pode ser sobrescrito por lote no modal de impressão.",plateClear:"Confirmação de placa livre",requirePlateClear:"Exigir confirmação de placa livre",requirePlateClearDescription:'Quando ativado, o agendador aguarda uma confirmação de placa livre por impressora antes de iniciar impressões na fila em impressoras com trabalhos concluídos. Desativar isso também oculta o indicador de status da placa e o botão "Marcar placa como liberada" nos cartões das impressoras.',gcodeInjection:"Injeção de G-code",gcodeInjectionDescription:'Configure G-code personalizado para injetar no início e/ou no final das impressões para sistemas de impressão automática como Farmloop, SwapMod, AutoClear e Printflow 3D. Os snippets são configurados por modelo de impressora e aplicados quando "Injetar G-code" está ativado em um item da fila.',gcodeInjectionNoPrinters:"Nenhuma impressora encontrada. Adicione impressoras para configurar snippets de G-code.",gcodeStartLabel:"G-code inicial",gcodeEndLabel:"G-code final",gcodeStartPlaceholder:"G-code inserido antes do início da impressão...",gcodeEndPlaceholder:"G-code adicionado após o término da impressão...",staggerGroupSize:"Tamanho do grupo",staggerGroupSizeHelp:"Impressoras para iniciar simultaneamente por grupo",staggerInterval:"Intervalo (minutos)",staggerIntervalHelp:"Atraso entre o início de cada grupo",queueDrying:"Secagem Automática",queueDryingDescription:"Secar automaticamente o filamento AMS quando a impressora estiver ociosa entre impressões na fila. Usa o limite de umidade acima.",queueDryingEnabled:"Ativar secagem automática",queueDryingEnabledDescription:"Iniciar secagem AMS automaticamente quando a impressora estiver ociosa e a umidade estiver acima do limite",queueDryingBlock:"Aguardar conclusão da secagem",queueDryingBlockDescription:"Bloquear a fila de impressão até a secagem terminar. Quando desativado, impressões têm prioridade.",ambientDryingEnabled:"Secagem ambiente",ambientDryingEnabledDescription:"Secar automaticamente o filamento em impressoras ociosas quando a umidade exceder o limite, mesmo sem impressões na fila.",dryingPresets:"Predefinições de secagem",dryingPresetsDescription:"Temperatura e duração por tipo de filamento. AMS 2 Pro usa temperaturas mais baixas, AMS-HT suporta temperaturas mais altas.",dryingFilament:"Filamento",printModal:"Modal de Impressão",expandCustomMapping:"Expandir mapeamento personalizado por padrão",expandCustomMappingDescription:"Ao imprimir em várias impressoras, mostrar o mapeamento AMS por impressora expandido",authentication:"Autenticação",authEnabledDescription:"Sua instância está protegida com autenticação de usuário",authDisabledDescription:"Ative para exigir login e gerenciar o acesso dos usuários",authDisabledMessage:"Ative a autenticação para criar contas de usuário, gerenciar permissões e proteger sua instância do Bambuddy.",enableAuthentication:"Ativar Autenticação",currentUser:"Usuário Atual",changePassword:"Alterar Senha",admin:"Administrador",users:"Usuários",addUser:"Adicionar Usuário",groups:"Grupos",addGroup:"Adicionar Grupo",system:"Sistema",noDescription:"Sem descrição",userCount:"{{count}} usuários",permissionCount:"{{count}} permissões",createUser:"Criar Usuário",username:"Nome de Usuário",enterUsername:"Digite o nome de usuário",password:"Senha",enterPassword:"Digite a senha",passwordRequirements:"Pelo menos 8 caracteres, com uma maiúscula, uma minúscula, um dígito e um caractere especial.",confirmPassword:"Confirmar Senha",confirmPasswordPlaceholder:"Confirme a senha",viewReleaseOnGitHub:"Ver lançamento no GitHub",turnAllPlugsOn:"Ligar todas as tomadas",turnAllPlugsOff:"Desligar todas as tomadas",clearNotificationLogs:"Limpar Logs de Notificação",clearLogsMessage:"Isso excluirá permanentemente todos os logs de notificação com mais de 30 dias. Esta ação não pode ser desfeita.",clearLogs:"Limpar Logs",resetUiPreferences:"Redefinir Preferências de UI",resetUiPreferencesMessage:"Isso redefinirá todas as preferências de UI para os padrões: ordem da barra lateral, tema, layout do painel, modos de exibição e preferências de classificação. Suas impressoras, arquivos e configurações do servidor NÃO serão afetados. A página será recarregada após a limpeza.",resetPreferences:"Redefinir Preferências",deleteGroupTitle:"Excluir Grupo",deleteGroupMessage:"Tem certeza de que deseja excluir este grupo? Usuários neste grupo perderão essas permissões.",deleteGroup:"Excluir Grupo",disableAuthenticationTitle:"Desativar Autenticação",disableAuthenticationMessage:"Tem certeza de que deseja desativar a autenticação? Isso tornará sua instância do Bambuddy acessível sem login. Todos os usuários permanecerão no banco de dados, mas a autenticação será desativada.",disableAuthentication:"Desativar Autenticação",configureBambuddy:"Configurar Bambuddy",systemDefault:"Padrão do Sistema",archiveSettings:"Configurações de Arquivo",newWindow:"Nova Janela",embeddedOverlay:"Sobreposição Incorporada",preferredSlicer:"Fatiador Preferido",preferredSlicerDescription:"Escolha qual aplicativo de fatiamento abrirá os arquivos",orcaslicerKnownIssuesWarning:"OrcaSlicer 2.3.2 / 2.4.0-dev têm bugs CLI conhecidos que bloqueiam o fatiamento de muitos 3MFs criados pela Bambu — veja issues upstream #12426 (segfault em arquivos multi-extrusor pintados) e #13386 (rejeição de validação estrita de intervalos de parâmetros). Bambu Studio é recomendado até as correções upstream chegarem.",useSlicerApi:"Usar API do fatiador",useSlicerApiDescription:'Quando ativo, as ações "Slice" abrem o modal do fatiador interno e chamam o sidecar slicer-API. Quando inativo (padrão), redirecionam ao fatiador desktop via esquema URI.',slicerCard:"Fatiador",orcaslicerApiUrl:"OrcaSlicer sidecar URL",bambuStudioApiUrl:"Bambu Studio sidecar URL",slicerApiUrlDescription:"URL do contêiner sidecar slicer-API. Deixe em branco para usar SLICER_API_URL / BAMBU_STUDIO_API_URL.",slicerBundles:{title:"Bundles do fatiador",description:'Importe um Printer Preset Bundle (.bbscfg) exportado do BambuStudio (Arquivo → Exportar → Exportar Bundle de Predefinições → "Printer preset bundle"). Após importado, solicitações de fatiamento podem escolher predefinições do bundle por nome sem re-enviar o triplet de perfis JSON.',uploadButton:"Enviar bundle",uploading:"Enviando…",loading:"Carregando bundles…",empty:"Nenhum bundle importado ainda.",summary:"{{processCount}} processo · {{filamentCount}} predefinições de filamento",delete:"Excluir",uploadSuccess:"{{name}} importado",uploadError:"Falha ao enviar bundle: {{message}}",deleteSuccess:"Bundle removido",deleteError:"Falha ao excluir bundle: {{message}}",confirmDeleteTitle:"Remover este bundle?",confirmDeleteMessage:'Solicitações de fatiamento referenciando "{{name}}" falharão até o bundle ser reimportado.'},externalCameras:"Câmeras Externas",costTracking:"Rastreamento de Custos",printsOnly:"Apenas Impressões",totalConsumption:"Consumo Total",dataManagement:"Gerenciamento de Dados",storageUsage:"Uso de Armazenamento",storageUsageDescription:"Detalhamento do uso de dados por categoria",storageUsageTotal:"Total",storageUsageErrors:"Erros",storageUsageOtherBreakdown:"Outros (inclui ativos estáticos, scripts e arquivos de configuração)",storageUsageSystem:"Sistema",storageUsageData:"Dados",storageUsageUnavailable:"Informações de uso de armazenamento indisponíveis",clearNotificationLogsDescription:"Excluir logs de notificação com mais de 30 dias",resetUiPreferencesDescription:"Redefinir ordem da barra lateral, tema, modos de exibição e preferências de layout. Impressoras, arquivos e configurações não são afetados.",enableHomeAssistant:"Ativar Home Assistant",enableMqtt:"Ativar MQTT",useTls:"Usar TLS",enableMetricsEndpoint:"Ativar Endpoint de Métricas",availableMetrics:"Métricas Disponíveis",editUser:"Editar Usuário",deleteUserTitle:"Excluir Usuário",groupName:"Nome do Grupo",leaveEmptyForAnonymous:"Deixe vazio para anônimo",leaveEmptyForNoAuth:"Deixe vazio para sem autenticação",enterNewPassword:"Digite a nova senha",confirmNewPassword:"Confirme a nova senha",enterGroupName:"Digite o nome do grupo",enterDescriptionOptional:"Digite a descrição (opcional)",enterCurrentPassword:"Digite a senha atual",enterNewPasswordMin6:"Digite a nova senha (mínimo 6 caracteres)",toast:{keyCopied:"Chave copiada para a área de transferência",copyFailed:"Falha ao copiar a chave",keyAddedToBrowser:"Chave adicionada ao Navegador de API",clearLogsFailed:"Falha ao limpar logs",uiPreferencesReset:"Preferências de UI redefinidas. Atualizando...",authDisabled:"Autenticação desativada com sucesso",authDisableFailed:"Falha ao desativar a autenticação",apiKeyCreated:"Chave de API criada",apiKeyDeleted:"Chave de API excluída",userCreated:"Usuário criado com sucesso",userUpdated:"Usuário atualizado com sucesso",userDeleted:"Usuário excluído com sucesso",groupCreated:"Grupo criado com sucesso",groupUpdated:"Grupo atualizado com sucesso",groupDeleted:"Grupo excluído com sucesso",fillRequiredFields:"Por favor, preencha todos os campos obrigatórios",passwordsDoNotMatch:"As senhas não coincidem",passwordTooShort:"A senha deve ter pelo menos 8 caracteres",passwordNeedsUppercase:"A senha deve conter pelo menos uma letra maiúscula",passwordNeedsLowercase:"A senha deve conter pelo menos uma letra minúscula",passwordNeedsDigit:"A senha deve conter pelo menos um dígito",passwordNeedsSpecial:"A senha deve conter pelo menos um caractere especial",enterGroupName:"Por favor, insira um nome de grupo",settingsSaved:"Configurações salvas",noPermissionUpdate:"Você não tem permissão para alterar as configurações",cameraSettingsSaved:"Configurações da câmera salvas",enterCameraUrl:"Por favor, insira a URL da câmera",passwordChanged:"Senha alterada com sucesso",connectionFailed:"Falha na conexão",testFailed:"Falha no teste",cameraConnected:"Câmera conectada{{resolution}}"},testConnection:"Testar Conexão",catalog:{spoolCatalog:"Catálogo de Carretéis",spoolCatalogDescription:"Pesos de carretéis vazios por marca/tipo. Usado para pesquisa automática de peso ao adicionar carretéis.",searchCatalog:"Pesquisar no catálogo...",addNewEntry:"Adicionar Nova Entrada",namePlaceholder:"Nome (ex.: Bambu Lab - Plástico)",weight:"Peso",type:"Tipo",default:"Padrão",custom:"Personalizado",noMatch:"Nenhuma entrada corresponde à sua pesquisa",empty:"Nenhuma entrada no catálogo",deleteEntry:"Excluir Entrada",deleteConfirm:'Tem certeza de que deseja excluir "{{name}}"?',resetCatalog:"Redefinir Catálogo",resetConfirm:"Redefinir catálogo para os padrões? Isso removerá todas as entradas personalizadas.",loadFailed:"Falha ao carregar o catálogo de carretéis",nameWeightRequired:"Nome e peso são obrigatórios",entryAdded:"Entrada adicionada",addFailed:"Falha ao adicionar entrada",entryUpdated:"Entrada atualizada",updateFailed:"Falha ao atualizar entrada",entryDeleted:"Entrada excluída",deleteFailed:"Falha ao excluir entrada",resetSuccess:"Catálogo redefinido para os padrões",resetFailed:"Falha ao redefinir catálogo",exported:"Exportadas {{count}} entradas",imported:"Importadas {{added}} entradas ({{skipped}} ignoradas)",importFailed:"Falha ao importar: formato JSON inválido",exportTooltip:"Exportar catálogo para JSON",importTooltip:"Importar catálogo de JSON",resetTooltip:"Redefinir para os padrões",selectedCount:"{{count}} selecionados",deleteSelected:"Excluir Selecionados",bulkDeleteConfirm:"Tem certeza de que deseja excluir {{count}} entradas?",bulkDeleted:"{{count}} entradas excluídas",bulkDeleteFailed:"Falha ao excluir entradas",material:"Material",spoolWeight:"Peso do carretel",color:"Cor",updateSpoolWeight:"Atualizar peso do carretel",filamentUpdated:"Filamento atualizado",filamentUpdateFailed:"Falha ao atualizar filamento",filamentUpdateInvalid:"Dados de filamento inválidos",keepExistingSpoolWeight:"Manter peso antigo para carretéis existentes",keepExistingSpoolWeightDesc:"Os carretéis já criados com este tipo de filamento mantêm o peso tara antigo. Novos carretéis usam o valor atualizado.",applyToAllSpools:"Aplicar a todos os carretéis",applyToAllSpoolsDesc:"Todos os cálculos de peso para este tipo de filamento usam imediatamente o novo peso tara."},colorCatalog:{title:"Catálogo de Cores",description:"Cores de filamento por fabricante/material. Usado para pesquisa automática de cores ao adicionar carretéis.",searchColors:"Pesquisar cores...",allManufacturers:"Todos os fabricantes",addNewColor:"Adicionar Nova Cor",manufacturer:"Fabricante",colorName:"Nome da Cor",hex:"Hex",materialOptional:"Material (opcional)",showing:"Mostrando {{filtered}} de {{total}} cores",noMatch:"Nenhuma cor corresponde à sua pesquisa",empty:"Nenhuma cor no catálogo",deleteColor:"Excluir Cor",deleteConfirm:'Tem certeza de que deseja excluir "{{name}}"?',resetCatalog:"Redefinir Catálogo de Cores",resetConfirm:"Redefinir catálogo para os padrões? Isso removerá todas as cores personalizadas.",sync:"Sincronizar",starting:"Iniciando...",syncTooltip:"Sincronizar do FilamentColors.xyz (2000+ cores, pode levar um minuto)",loadFailed:"Falha ao carregar o catálogo de cores",fieldsRequired:"Fabricante, nome da cor e cor hex são obrigatórios",colorAdded:"Cor adicionada",addFailed:"Falha ao adicionar cor",colorUpdated:"Cor atualizada",updateFailed:"Falha ao atualizar cor",colorDeleted:"Cor excluída",deleteFailed:"Falha ao excluir cor",resetSuccess:"Catálogo de cores redefinido para os padrões",resetFailed:"Falha ao redefinir catálogo",syncUpToDate:"Já está atualizado ({{count}} cores verificadas)",syncComplete:"Adicionadas {{added}} novas cores ({{skipped}} já existiam)",syncError:"Erro de sincronização",syncFailed:"Falha ao sincronizar do FilamentColors.xyz",exported:"Exportadas {{count}} cores",imported:"Importadas {{added}} cores ({{skipped}} ignoradas)",importFailed:"Falha ao importar: formato JSON inválido",selectedCount:"{{count}} selecionados",deleteSelected:"Excluir Selecionados",bulkDeleteConfirm:"Tem certeza de que deseja excluir {{count}} cores?",bulkDeleted:"{{count}} cores excluídas",bulkDeleteFailed:"Falha ao excluir cores"},dateFormat:"Formato de data",dateFormatUs:"US (MM/DD/AAAA)",dateFormatEu:"EU (DD/MM/AAAA)",dateFormatIso:"ISO (AAAA-MM-DD)",timeFormat:"Formato de hora",timeFormat12:"12 horas (3:30 PM)",timeFormat24:"24 horas (15:30)",defaultPrinter:"Impressora padrão",defaultPrinterDescription:"Pré-selecionar esta impressora para uploads, reimpressões e outras operações.",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"Arraste itens na barra lateral para reordenar. Restaurar ordem padrão aqui.",setDefault:"Definir padrão",sidebarOrderSetDefaultHint:"Definir padrão aplica a ordem atual do menu aos usuários que ainda não personalizaram o seu.",sidebarDefaultSet:"Ordem padrão do menu foi definida.",sidebarDefaultCleared:"Ordem padrão do menu removida.",sidebarDefaultFailed:"Falha ao definir a ordem padrão do menu.",reset:"Redefinir",darkMode:"Modo escuro",lightMode:"Modo claro",active:"(ativo)",background:"Fundo",accent:"Destaque",style:"Estilo",bgNeutral:"Neutro",bgWarm:"Quente",bgCool:"Frio",bgOled:"OLED Preto",bgSlate:"Azul ardósia",bgForest:"Verde floresta",accentGreen:"Verde",accentTeal:"Azul-petróleo",accentBlue:"Azul",accentOrange:"Laranja",accentPurple:"Roxo",accentRed:"Vermelho",styleClassic:"Clássico",styleGlow:"Brilhante",styleVibrant:"Vibrante",themeToggleHint:"Alternar entre modo escuro, claro e sistema usando o ícone na barra lateral.",autoArchivePrints:"Arquivar impressões automaticamente",autoArchiveDescription:"Salvar automaticamente arquivos 3MF quando impressões forem concluídas",saveThumbnailsDescription:"Extrair e salvar imagens de pré-visualização dos arquivos 3MF",captureFinishPhotoDescription:"Tirar foto da câmera da impressora quando a impressão for concluída",ffmpegNotInstalled:"ffmpeg não instalado",ffmpegRequired:"A captura de câmera requer ffmpeg. Instale via <brew>brew install ffmpeg</brew> (macOS) ou <apt>apt install ffmpeg</apt> (Linux).",camera:"Câmera",cameraViewMode:"Modo de visualização da câmera",cameraOverlayDescription:"A câmera abre em uma sobreposição redimensionável na tela principal",cameraWindowDescription:"A câmera abre em uma janela separada do navegador",externalCamerasDescription:"Configure câmeras externas para substituir a câmera integrada da impressora. Suporta streams MJPEG, RTSP, snapshots HTTP e câmeras USB (V4L2). Quando habilitada, a câmera externa é usada para visualização ao vivo e fotos de conclusão.",cameraPlaceholderUsb:"Caminho do dispositivo (/dev/video0)",cameraPlaceholderUrl:"URL da câmera (rtsp://... ou http://...)",cameraTypeMjpeg:"Stream MJPEG",cameraTypeRtsp:"Stream RTSP",cameraTypeSnapshot:"Snapshot HTTP",cameraTypeUsb:"Câmera USB (V4L2)",cameraSnapshotUrl:"URL de captura (opcional)",cameraSnapshotUrlPlaceholder:"http://192.168.1.61:1984/api/frame.jpeg?src=printer",cameraSnapshotUrlHelp:"URL de frame único usado para miniaturas de notificação, fotos de finalização, frames do timelapse por camada e detecção de mesa. Timelapse e detecção de mesa requerem cada um seu próprio toggle por impressora — esta URL é apenas a fonte de imagem que eles usam quando ativos. Deixe em branco para capturar do stream ao vivo acima. Útil para go2rtc (/api/frame.jpeg) e câmeras IP com endpoint de captura dedicado.",cameraRotation:"Rotação",test:"Testar",connected:"Conectado",disconnected:"Desconectado",currency:"Moeda",defaultFilamentCost:"Custo padrão do filamento (por kg)",electricityCost:"Custo da eletricidade por kWh",energyDisplayMode:"Modo de exibição de energia",energyModePrintDescription:"O painel mostra a soma da energia usada durante as impressões",energyModeTotalDescription:"O painel mostra a energia total dos plugues inteligentes",fileManager:"Gerenciador de arquivos",createArchiveEntry:"Criar entrada de arquivo ao imprimir",createArchiveEntryDescription:"Ao imprimir pelo gerenciador de arquivos, criar opcionalmente uma entrada de arquivo",lowDiskSpaceWarning:"Aviso de pouco espaço em disco",lowDiskSpaceDescription:"Mostrar aviso quando o espaço livre em disco ficar abaixo deste limite",printerFirmware:"Firmware da impressora",checkFirmwareDescription:"Verificar atualizações de firmware da Bambu Lab",bambuddySoftware:"Software Bambuddy",autoCheckDescription:"Verificar automaticamente novas versões ao iniciar",checkNow:"Verificar agora",updateAvailableVersion:"Atualização disponível: v{{version}}",releaseNotes:"Notas da versão",updateViaDocker:"Atualizar via Docker Compose:",updateViaHomeAssistant:"As atualizações são gerenciadas pelo Supervisor do Home Assistant. Abra Configurações → Complementos → Bambuddy no Home Assistant para instalar a nova versão.",installUpdate:"Instalar atualização",latestVersionRunning:"Você está usando a versão mais recente",failedToCheckUpdates:"Falha ao verificar atualizações: {{error}}",backupRestore:"Backup e Restauração",backupRestoreDescription:"Exportar/importar configurações e configurar backup do GitHub",goToBackup:"Ir para backup",externalUrl:"URL externa",externalUrlDescription:"A URL externa onde o Bambuddy está acessível. Usada para imagens de notificação e integrações externas.",bambuddyUrl:"URL do Bambuddy",externalUrlHint:"Inclua protocolo e porta (ex: http://192.168.1.100:8000)",ftpRetry:"Tentativa FTP",ftpRetryDescription:"Tentar novamente operações FTP quando o WiFi da impressora é instável. Aplica-se a downloads 3MF, uploads de impressão, downloads de timelapse e atualizações de firmware.",autoRetryDescription:"Tentar novamente automaticamente operações FTP que falharam",retryAttempts:"Tentativas de reenvio",retryDelay:"Atraso entre tentativas",connectionTimeout:"Tempo limite de conexão",time_one:"{{count}} vez",time_other:"{{count}} vezes",second_one:"{{count}} segundo",second_other:"{{count}} segundos",nSeconds:"{{count}} segundos",increaseForWeakWifi:"Aumente para impressoras com WiFi fraco",homeAssistant:"Home Assistant",homeAssistantFullDescription:"Conecte ao Home Assistant para controlar plugues inteligentes via API REST do HA. Suporta entidades switch, light, input_boolean e script.",homeAssistantUrl:"URL do Home Assistant",longLivedAccessToken:"Token de acesso de longa duração",haTokenHint:"Crie um token no HA: Perfil → Tokens de acesso de longa duração → Criar token",connectionSuccessful:"Conexão bem-sucedida",connectionFailed:"Falha na conexão",haConnectionSuccess:"Conectado com sucesso ao Home Assistant.",haConnectionFailed:"Falha ao conectar ao Home Assistant.",mqttPublishing:"Publicação MQTT",mqttDescription:"Publique eventos do BamBuddy para um broker MQTT externo para integração com Node-RED, Home Assistant e outros sistemas de automação.",mqttEnableDescription:"Publicar eventos no broker MQTT externo",brokerHostname:"Hostname do broker",port:"Porta",usernameOptional:"Usuário (opcional)",passwordOptional:"Senha (opcional)",topicPrefix:"Prefixo do tópico",topicPrefixHint:"Os tópicos serão: {{prefix}}/printers/<serial>/status, etc.",prometheusMetrics:"Métricas Prometheus",prometheusEndpointDescription:"Expor métricas da impressora em <code>/api/v1/metrics</code> para monitoramento Prometheus/Grafana.",bearerTokenOptional:"Token Bearer (opcional)",bearerTokenHint:"Se definido, as requisições devem incluir <code>Authorization: Bearer <token></code>",metricsConnectionStatus:"Status da conexão",metricsPrinterState:"Estado da impressora (idle/printing/etc)",metricsPrintProgress:"Progresso da impressão 0-100%",metricsBedTemp:"Temperatura da mesa",metricsNozzleTemp:"Temperatura do bico",metricsPrintsTotal:"Total de impressões por resultado",metricsMore:"...e mais (camadas, ventoinhas, fila, uso de filamento)",smartPlugsDescription:"Conecte plugues inteligentes (Tasmota ou Home Assistant) para automatizar o controle de energia e rastrear o consumo energético das suas impressoras.",allOn:"Ligar todos",allOff:"Desligar todos",addSmartPlug:"Adicionar plugue inteligente",energySummary:"Resumo de energia",currentPower:"Potência atual",plugsOnline:"{{reachable}}/{{total}} plugues online",today:"Hoje",yesterday:"Ontem",total:"Total",enablePlugsForSummary:"Habilite os plugues para ver o resumo de energia",addNotificationProvider:"Adicionar",systemBadge:"(Sistema)",creating:"Criando...",changing:"Alterando...",deleteUserAndItems:"Excluir usuário E seus itens",deleteUserKeepItems:"Excluir usuário, manter itens (ficarão sem dono)",ok:"OK",twoFa:{totpTitle:"App Autenticador (TOTP)",totpDesc:"Use um app como Google Authenticator, Aegis ou Authy.",emailOtpTitle:"OTP por e-mail",emailOtpDesc:"Envie um código único para {{email}} ao fazer login.",emailOtpNoEmail:"Adicione um endereço de e-mail à sua conta para ativar este método.",addEmailFirst:"Sua conta não tem endereço de e-mail. Peça a um administrador para adicionar um.",setupTotp:"Configurar App Autenticador",setupAuthApp:"Configurar App Autenticador",setupInstructions:"Escaneie o código QR com seu app autenticador e confirme com um código.",manualEntry:"Não consegue escanear? Digite este segredo manualmente:",scannedContinue:"Código escaneado — continuar",enterCodeToConfirm:"Digite o código de 6 dígitos do seu app autenticador para confirmar.",activate:"Ativar",disableTotp:"Desativar Autenticador",disableConfirmHint:"Digite um código TOTP válido ou um código de backup para desativar o autenticador.",totpDisabled:"App autenticador desativado.",emailOtpEnabled:"OTP por e-mail ativado.",emailOtpDisabled:"OTP por e-mail desativado.",smtpRequired:"Por favor, configure e teste as configurações SMTP primeiro.",invalidCode:"Código inválido. Por favor, tente novamente.",enableEmailOtp:"Ativar OTP por e-mail",disableEmailOtp:"Desativar OTP por e-mail",emailSetupEnterCode:"Um código de verificação foi enviado para o seu endereço de e-mail. Digite-o abaixo para confirmar que você possui esta caixa de entrada.",verifyAndEnable:"Verificar e Ativar",emailDisablePasswordHint:"Digite a senha da sua conta para confirmar a desativação do OTP por e-mail.",passwordPlaceholder:"Digite sua senha",backupCodesTitle:"Salve seus códigos de backup",backupCodesWarning:"Guarde estes códigos em lugar seguro. Cada código só pode ser usado uma vez.",backupCodesRemaining:"{{count}} códigos de backup restantes",savedCodes:"Códigos salvos",regenBackup:"Regenerar códigos de backup",regenBackupHint:"Digite seu código TOTP atual para gerar 10 novos códigos de backup.",newBackupCodes:"Novos códigos de backup",linkedAccounts:"Contas SSO vinculadas",linkedAccountsDesc:"Estes provedores de identidade externos estão vinculados à sua conta.",oidcUnlinked:"Conta desvinculada."},oidc:{title:"Provedores SSO / OIDC",desc:"Configure provedores OpenID Connect para login único.",addProvider:"Adicionar provedor",newProvider:"Novo provedor",empty:"Nenhum provedor OIDC configurado ainda.",created:"Provedor criado.",updated:"Provedor atualizado.",deleted:"Provedor excluído.",refreshIcon:"Atualizar ícone",removeIcon:"Remover ícone",iconRefreshed:"Ícone atualizado.",iconRemoved:"Ícone removido.",iconFetchFailed:"Não foi possível obter o ícone da URL do provedor.",deleteTitle:"Excluir provedor",deleteMessage:'Excluir "{{name}}"? Todas as contas vinculadas serão desconectadas.',form:{name:"Nome de exibição",issuerUrl:"URL do emissor",clientId:"ID do cliente",clientSecret:"Client secret",scopes:"Escopos",iconUrl:"URL do ícone (opcional)",enabled:"Ativado",autoCreate:"Criar usuários automaticamente",autoCreateDesc:"Cria automaticamente uma conta local no primeiro login.",autoLink:"Vincular contas existentes automaticamente",autoLinkDesc:"Vincula contas locais existentes por e-mail no primeiro login.",secretHint:"deixe em branco para manter",secretPlaceholder:"novo segredo",emailClaim:"Claim de e-mail",emailClaimDesc:"Claim JWT usado como identidade de e-mail. Use 'preferred_username' ou 'upn' para Azure Entra ID (que não envia email_verified). Use apenas nomes de claim confiáveis.",emailClaimPlaceholder:"e-mail",emailClaimCustomClaimAutoLinkWarning:"Claims personalizadas são seguras para vinculação automática apenas quando o valor é administrado pelo tenant (ex. Azure Entra ID upn / preferred_username). Não ative a vinculação automática se seu IdP permite que usuários auto-declarem essa claim.",requireEmailVerified:"Exigir e-mail verificado",requireEmailVerifiedDesc:"Aceitar o claim de e-mail apenas quando o provedor o marcar como verificado.",requireEmailVerifiedWarning:"Aviso: o e-mail será aceito sem verificação. Use apenas com provedores confiáveis.",requireEmailVerifiedAutoLink:"Desabilite o vínculo automático primeiro para alterar esta configuração.",defaultGroup:"Grupo padrão",defaultGroupDesc:"Grupo atribuído aos usuários criados automaticamente. Retorna a Viewers se não definido.",defaultGroupViewersFallback:"Viewers (padrão)"}},encryption:{title:"Status de criptografia MFA",enabledFromEnv:"Criptografia em repouso ativa (chave da variável de ambiente MFA_ENCRYPTION_KEY)",enabledFromFile:"Criptografia em repouso ativa (chave do diretório de dados)",enabledGenerated:"Criptografia em repouso ativa com chave auto-gerada",notConfigured:"Criptografia em repouso não configurada",notConfiguredDesc:"Os segredos TOTP e client_secrets OIDC são armazenados em texto plano. Defina MFA_ENCRYPTION_KEY ou reinicie o Bambuddy com um diretório de dados gravável para gerar automaticamente.",allEncrypted:"Todos os segredos MFA são criptografados em repouso.",legacyRowsLabel:"Linhas legadas em texto plano",encryptedRowsLabel:"Linhas criptografadas",legacyRowsWarning:"{{count}} linha(s) legada(s) em texto plano detectada(s). Salve novamente o provedor OIDC ou registre novamente o autenticador do usuário para migrar ao armazenamento criptografado.",backupHint:"A chave auto-gerada é armazenada em DATA_DIR/.mfa_encryption_key e incluída em ZIPs de backup locais. Mantenha seus backups seguros ou defina MFA_ENCRYPTION_KEY explicitamente.",decryptionBrokenTitle:"Chave de criptografia ausente",decryptionBrokenError:"{{count}} registro(s) criptografado(s) não podem ser descriptografados pois a chave de criptografia não está mais disponível. Restaure o MFA_ENCRYPTION_KEY anterior ou DATA_DIR/.mfa_encryption_key para recuperar.",migrationErrorWarning:"{{count}} linha(s) antiga(s) não puderam ser recriptografadas na inicialização. Verifique os logs do servidor e reinicie o Bambuddy para tentar novamente."},spoolbuddy:{infoTitle:"Dispositivos SpoolBuddy",infoBody:"Os kiosks SpoolBuddy se registram automaticamente via heartbeat. Cancele o registro de um dispositivo aqui se não estiver mais em uso ou se um duplicado obsoleto foi deixado por uma falha do daemon.",duplicatesTitle:"{{count}} dispositivos registrados",duplicatesBody:"Apenas o primeiro dispositivo registrado é usado pela interface do kiosk. Se algum destes for um duplicado obsoleto após uma falha, cancele seu registro — um dispositivo online se registrará novamente no próximo heartbeat.",empty:"Nenhum dispositivo SpoolBuddy registrado ainda.",online:"Online",offline:"Offline",unregister:"Cancelar registro",unregisterSuccess:"Dispositivo removido",unregisterError:"Falha ao cancelar registro",confirmTitle:"Cancelar registro do dispositivo SpoolBuddy?",confirmBody:'Isso removerá "{{hostname}}" ({{deviceId}}) do banco de dados. Se o dispositivo estiver online, ele se registrará novamente no próximo heartbeat.',ipAddress:"Endereço IP",firmware:"Firmware",lastSeen:"Visto pela última vez",daemonUptime:"Tempo ativo do daemon",systemUptime:"Tempo ativo do sistema",never:"nunca",nfc:"NFC",scale:"Balança",cpuTemp:"Temp. CPU",cpuLoad:"Carga da CPU",memory:"Memória",disk:"Disco",update:"Atualizar",updateConfirmTitle:"Atualizar daemon do Spoolbuddy?",updateConfirmBody:'Iniciar uma atualização de software em "{{hostname}}"? O daemon será reiniciado após a aplicação.',restartBrowser:"Reiniciar navegador",restartBrowserConfirmTitle:"Reiniciar o navegador do kiosk?",restartBrowserConfirmBody:'Reiniciar o navegador do kiosk em "{{hostname}}"? A tela ficará em branco brevemente.',restartDaemon:"Reiniciar daemon",restartDaemonConfirmTitle:"Reiniciar daemon do Spoolbuddy?",restartDaemonConfirmBody:'Reiniciar o daemon do Spoolbuddy em "{{hostname}}"? O dispositivo ficará offline por alguns segundos.',reboot:"Reiniciar",rebootConfirmTitle:"Reiniciar o dispositivo?",rebootConfirmBody:'Reiniciar "{{hostname}}"? O dispositivo ficará offline por cerca de um minuto.',shutdown:"Desligar",shutdownConfirmTitle:"Desligar o dispositivo?",shutdownConfirmBody:'Desligar "{{hostname}}"? Será necessário acesso físico para ligá-lo novamente.',commandConfirm:"Confirmar",commandQueued:"Comando enfileirado",commandError:"Falha ao enviar comando"}},notification:{printStarted:{title:"Impressão Iniciada",body:"{{printer}}: {{filename}} iniciou a impressão"},printCompleted:{title:"Impressão Concluída",body:"{{printer}}: {{filename}} foi concluída com sucesso"},printFailed:{title:"Falha na Impressão",body:"{{printer}}: {{filename}} falhou"},printStopped:{title:"Impressão Interrompida",body:"{{printer}}: {{filename}} foi interrompida"},printProgress:{title:"Progresso da Impressão",body:"{{printer}}: {{filename}} está {{percent}}% concluída"},printerOffline:{title:"Impressora Offline",body:"{{printer}} está offline"},printerError:{title:"Erro na Impressora",body:"{{printer}} – {{error}}"},filamentLow:{title:"Filamento Baixo",body:"{{printer}}: O filamento está acabando"},maintenanceDue:{title:"Manutenção Pendente",body:"{{printer}}: {{items}} precisam de atenção"}},errors:{generic:"Algo deu errado",networkError:"Erro de rede. Por favor, verifique sua conexão.",notFound:"Não encontrado",unauthorized:"Não autorizado",serverError:"Erro no servidor",validationError:"Por favor, verifique sua entrada",printerConnectionFailed:"Falha ao conectar à impressora",saveFailed:"Falha ao salvar alterações",deleteFailed:"Falha ao excluir",loadFailed:"Falha ao carregar dados"},hmsErrors:{title:"Erros - {{name}}",noErrors:"Nenhum erro",viewOnWiki:"Ver no Bambu Lab Wiki",clearInstructions:"Limpe os erros na impressora para descartá-los aqui.",clearErrors:"Limpar Erros",clearSuccess:"Erros HMS limpos",clearFailed:"Falha ao limpar erros HMS"},mqttDebug:{title:"MQTT Log de Depuração",searchPlaceholder:"Pesquisar tópico ou payload...",noMessages:"Nenhuma mensagem registrada ainda",startLoggingHint:'Clique em "Iniciar Registro" para começar a capturar mensagens MQTT',noMessagesMatch:"Nenhuma mensagem corresponde ao seu filtro",adjustFilterHint:"Tente ajustar seus critérios de pesquisa ou filtro",incoming:"Entrada",outgoing:"Saída",loggingStopped:"Registro interrompido",loggingActive:"Registro ativo - as mensagens serão atualizadas automaticamente",startLogging:"Iniciar Registro",stopLogging:"Parar Registro",clearLog:"Limpar Registro",topic:"ópico",timestamp:"Carimbo de Data/Hora",direction:"Direção",all:"Todos"},printerFiles:{title:"Gerenciador de Arquivos",storageUsed:"Usado:",storageFree:"Livre:",filterPlaceholder:"Filtrar arquivos...",deleteButton:"Excluir",deleteFiles:"Excluir {{count}} arquivos",deleteFileConfirm:'Excluir "{{name}}"? Isso não pode ser desfeito.',deleteFilesConfirm:"Excluir {{count}} arquivos selecionados? Isso não pode ser desfeito.",noFiles:"Nenhum arquivo na impressora",loadingFiles:"Carregando arquivos...",failedToLoad:"Falha ao carregar arquivos",toast:{filesDeleted:"Arquivos excluídos: {{count}}",deleteFailed:"Falha ao excluir: {{error}}"}},confirm:{delete:"Tem certeza de que deseja excluir isso?",unsavedChanges:"Você tem alterações não salvas. Tem certeza de que deseja sair?",clearQueue:"Tem certeza de que deseja limpar a fila?"},login:{title:"Login Bambuddy",subtitle:"Faça login na sua conta",username:"Nome de usuário",usernamePlaceholder:"Digite seu nome de usuário",usernameOrEmail:"Nome de usuário ou Email",usernameOrEmailPlaceholder:"Nome de usuário ou Email",password:"Senha",passwordPlaceholder:"Digite sua senha",signIn:"Entrar",signingIn:"Entrando...",rememberMe:"Lembrar de mim",forgotPassword:"Esqueceu sua senha?",loginSuccess:"Login realizado com sucesso",loginFailed:"Falha no login",enterCredentials:"Por favor, insira nome de usuário e senha",enterEmail:"Por favor, insira seu endereço de e-mail",oidcLoginFailed:"Falha no login OIDC",oidcErrors:{providerError:"O provedor de identidade retornou um erro",missingParameters:"Parâmetros obrigatórios ausentes no callback OIDC",invalidState:"Estado OIDC inválido ou já utilizado",stateExpired:"Sessão OIDC expirada — tente novamente",providerNotFound:"Provedor OIDC não encontrado",discoveryFailed:"Falha ao obter o documento de descoberta OIDC",invalidDiscovery:"Documento de descoberta OIDC inválido",networkError:"Erro de rede durante a troca de token OIDC",badResponse:"Resposta inesperada durante a troca de token OIDC",noIdToken:"O provedor OIDC não retornou um token de ID",validationFailed:"Falha na validação do token OIDC",nonceMismatch:"Nonce OIDC não corresponde — possível ataque de replay",missingSubClaim:"Token OIDC sem claim sub",noLinkedAccount:"Nenhuma conta local vinculada a esta identidade OIDC",accountInactive:"Sua conta está inativa",userResolutionFailed:"Falha ao resolver sua conta",internalError:"Erro interno durante o login OIDC",tokenExchangeFailed:"Falha na troca de token OIDC"},forgotPasswordTitle:"Esqueceu a Senha",forgotPasswordMessage:"Se você esqueceu sua senha, entre em contato com o administrador do sistema para redefini-la.",forgotPasswordEmailMessage:"Digite seu endereço de email e enviaremos uma nova senha.",emailAddress:"Endereço de Email",emailPlaceholder:"seu.email@exemplo.com",cancel:"Cancelar",sending:"Enviando...",sendResetEmail:"Enviar Email de Redefinição",howToReset:"Como redefinir sua senha:",resetStep1:"Entre em contato com o administrador do Bambuddy",resetStep2:"Peça para redefinir sua senha na Gestão de Usuários",resetStep3:"Eles podem definir uma nova senha temporária para você",resetStep4:"Faça login com a nova senha e altere-a nas Configurações",gotIt:"Entendi",resetPassword:{title:"Definir nova senha",subtitle:"Digite e confirme sua nova senha abaixo.",newPassword:"Nova senha",newPasswordPlaceholder:"Pelo menos 8 caracteres",confirmPassword:"Confirmar senha",confirmPasswordPlaceholder:"Repetir nova senha",saving:"Salvando…",submit:"Definir nova senha",backToLogin:"Voltar para o login",passwordsDoNotMatch:"As senhas não coincidem",passwordTooShort:"A senha deve ter pelo menos 8 caracteres",resetFailed:"Falha ao redefinir senha. O link pode ter expirado."},twoFA:{title:"Autenticação em dois fatores",subtitle:"Sua conta está protegida com 2FA. Insira o código de verificação abaixo.",methodAuthenticator:"Aplicativo autenticador",methodEmail:"Código por e-mail",methodBackup:"Código de recuperação",instructionsTotp:"Abra seu aplicativo autenticador e insira o código de 6 dígitos gerado para o Bambuddy.",instructionsEmail:"Um código de 6 dígitos foi enviado para o seu e-mail. Ele é válido por 10 minutos.",instructionsEmailNotSent:"Clique no botão abaixo para receber um código de verificação por e-mail.",instructionsBackup:"Insira um dos seus códigos de recuperação de 8 caracteres. Cada código só pode ser utilizado uma vez.",sendCodeButton:"Enviar código por e-mail",sendingCode:"Enviando...",resendCode:"Reenviar código",codeLabel:"Código de verificação",backupCodeLabel:"Código de recuperação",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"Verificar",verifyingButton:"Verificando...",backToLogin:"← Voltar para o login",orContinueWith:"ou entrar com",signInWith:"Entrar com {{provider}}",enterCode:"Por favor, insira o código de verificação",sendCodeFailed:"Falha ao enviar o código de verificação",invalidCode:"Código inválido. Por favor, tente novamente."}},setup:{title:"Bambuddy Configuração",subtitle:"Configure a autenticação para sua instância do Bambuddy",enableAuth:"Ativar Autenticação",adminAccount:"Conta de Administrador",adminAccountDesc:"Se usuários administradores já existirem, a autenticação será ativada usando as contas de administrador existentes. Deixe os campos abaixo vazios para usar os administradores existentes ou insira novas credenciais para criar um novo usuário administrador.",adminUsername:"Nome de usuário do administrador",adminPassword:"Senha do administrador",optionalIfAdminExists:"(opcional se usuários administradores existirem)",adminUsernamePlaceholder:"Digite o nome de usuário do administrador (opcional)",adminPasswordPlaceholder:"Digite a senha do administrador (opcional)",confirmPassword:"Confirmar Senha",confirmPasswordPlaceholder:"Confirme a senha do administrador",settingUp:"Configurando...",completeSetup:"Concluir Configuração",toast:{authEnabledAdminCreated:"Autenticação ativada e usuário administrador criado",authEnabledExistingAdmins:"Autenticação ativada usando usuários administradores existentes",setupCompleted:"Configuração concluída",enterBothCredentials:"Por favor, insira o nome de usuário e a senha do administrador, ou deixe ambos vazios para usar os usuários administradores existentes",passwordsDoNotMatch:"As senhas não coincidem",passwordTooShort:"A senha deve ter pelo menos 6 caracteres"}},changePassword:{title:"Alterar Senha",currentPassword:"Senha Atual",currentPasswordPlaceholder:"Digite a senha atual",newPassword:"Nova Senha",newPasswordPlaceholder:"Digite a nova senha (mínimo 6 caracteres)",confirmPassword:"Confirmar Senha",confirmPasswordPlaceholder:"Confirme a nova senha",passwordsDoNotMatch:"As senhas não coincidem",passwordTooShort:"A senha deve ter pelo menos 6 caracteres",changing:"Alterando...",success:"Senha alterada com sucesso",failed:"Falha ao alterar a senha"},plateAlert:{title:"Impressão Pausada!",message:"Objetos detectados na mesa de impressão. A impressão foi automaticamente pausada. Por favor, limpe a mesa e retome a impressão.",understand:"Entendi"},camera:{title:"Visualização da Câmera",invalidPrinterId:"ID da impressora inválido",live:"Ao Vivo",snapshot:"Captura",restartStream:"Reiniciar transmissão",refreshSnapshot:"Atualizar captura",fullscreen:"Tela Cheia",exitFullscreen:"Sair da Tela Cheia",connectingToCamera:"Conectando à câmera...",capturingSnapshot:"Capturando imagem...",connectionLost:"Conexão perdida",connectionFailed:"Falha na conexão com a câmera",reconnecting:"Reconectando em {{countdown}}s... (tentativa {{attempt}}/{{max}})",reconnectNow:"Reconectar agora",cameraUnavailable:"Câmera indisponível",cameraUnavailableDesc:"Certifique-se de que a impressora está ligada e conectada.",noCamera:"Nenhuma câmera disponível",retry:"Tentar novamente",cameraStream:"Transmissão da câmera",zoomOut:"Reduzir zoom",zoomIn:"Aumentar zoom",resetZoom:"Redefinir zoom",recording:"Gravando",startRecording:"Iniciar gravação",stopRecording:"Parar gravação",chamberLight:"Alternar luz da câmara",unavailable:"Câmera indisponível",diagnose:{button:"Diagnóstico",modalTitle:"Diagnóstico da câmera",running:"Executando diagnóstico...",runFailed:"Não foi possível executar o diagnóstico: {{error}}",retry:"Executar novamente",stage:{tcp_reachable:"Conectividade de rede",first_frame:"Captura de frame",live_stream_active:"Transmissão ao vivo ativa"},summary:{all_ok:"A câmera está funcionando. O diagnóstico concluiu todas as etapas com sucesso.",live_stream_active_healthy:"A câmera está transmitindo com frames recentes — nenhum teste necessário.",printer_unreachable:"Impressora inacessível. Verifique o endereço IP, a conexão de rede e se a impressora está ligada.",camera_port_closed:"A impressora responde mas a porta da câmera está fechada. Verifique se o modo LAN e o modo desenvolvedor estão ativados nas configurações da impressora.",no_frame:"Conexão com a câmera estabelecida mas nenhum frame recebido. Tente novamente ou verifique se a câmera está habilitada nas configurações da impressora.",unknown_failure:"Diagnóstico da câmera falhou por motivo desconhecido. Consulte o log de suporte para mais detalhes."},meta:{protocol:"Protocolo",port:"Porta",profile:"Perfil"}}},groups:{title:"Gerenciamento de Grupos",subtitle:"Gerenciar grupos de permissão para controle de acesso",backToSettings:"Voltar para Configurações",createGroup:"Criar Grupo",noPermission:"Você não tem permissão para acessar esta página.",system:"Sistema",noDescription:"Sem descrição",usersCount:"{{count}} usuários",permissionsCount:"{{count}} permissões",edit:"Editar",delete:"Excluir",toast:{created:"Grupo criado com sucesso",updated:"Grupo atualizado com sucesso",deleted:"Grupo excluído com sucesso",enterGroupName:"Por favor, insira um nome para o grupo"},modal:{editGroup:"Editar Grupo",createGroup:"Criar Grupo",cancel:"Cancelar",saving:"Salvando...",creating:"Criando...",saveChanges:"Salvar Alterações"},form:{groupName:"Nome do Grupo",groupNamePlaceholder:"Insira o nome do grupo",systemGroupWarning:"Os nomes dos grupos do sistema não podem ser alterados",description:"Descrição",descriptionPlaceholder:"Insira a descrição (opcional)",permissions:"Permissões ({{count}} selecionadas)"},deleteModal:{title:"Excluir Grupo",message:"Tem certeza de que deseja excluir este grupo? Os usuários deste grupo perderão essas permissões.",confirm:"Excluir Grupo"},editor:{title:"Editar Grupo",createTitle:"Criar Grupo",search:"Pesquisar permissões...",selectAll:"Selecionar Tudo",clearAll:"Limpar Tudo",permissionsSelected:"{{count}} selecionada(s)",noResults:"Nenhuma permissão corresponde à sua pesquisa"}},users:{title:"Gerenciamento de Usuários",subtitle:"Gerenciar usuários e seu acesso à sua instância do Bambuddy",backToSettings:"Voltar para Configurações",createUser:"Criar Usuário",noPermission:"Você não tem permissão para acessar esta página.",admin:"Administrador",noGroups:"Sem grupos",active:"Ativo",inactive:"Inativo",edit:"Editar",delete:"Excluir",system:"Sistema",noGroupsAvailable:"Nenhum grupo disponível",table:{username:"Nome de Usuário",groups:"Grupos",status:"Status",actions:"Ações"},toast:{created:"Usuário criado com sucesso",updated:"Usuário atualizado com sucesso",deleted:"Usuário excluído com sucesso",fillRequired:"Por favor, preencha todos os campos obrigatórios",passwordsDoNotMatch:"As senhas não coincidem",passwordTooShort:"A senha deve ter pelo menos 6 caracteres",ldapProvisioned:'Usuário LDAP "{{username}}" provisionado'},modal:{createUser:"Criar Usuário",editUser:"Editar Usuário",cancel:"Cancelar",creating:"Criando...",saving:"Salvando...",saveChanges:"Salvar Alterações",advancedAuthSubtitle:"com Autenticação Avançada",tabsAriaLabel:"Fonte do usuário",localTab:"Local",ldapTab:"LDAP",ldapSearchLabel:"Pesquisar diretório",ldapSearchPlaceholder:"Digite um nome de usuário, nome ou e-mail...",ldapMinChars:"Digite ao menos 2 caracteres para pesquisar",ldapTypeToSearch:"Comece a digitar para pesquisar o diretório LDAP",ldapSearching:"Pesquisando diretório...",ldapNoResults:"Nenhum usuário correspondente no diretório",ldapSearchError:"Falha na pesquisa do diretório. Verifique o status do servidor LDAP.",ldapAlreadyProvisioned:"Já provisionado",ldapSelectedLabel:"Selecionado",ldapProvision:"Provisionar usuário",ldapProvisioning:"Provisionando...",ldapErrorProvision:"Falha no provisionamento. Verifique o status do servidor LDAP e tente novamente."},form:{username:"Nome de Usuário",usernamePlaceholder:"Insira o nome de usuário",email:"E-mail",emailPlaceholder:"user@example.com",password:"Senha",passwordPlaceholder:"Insira a senha",confirmPassword:"Confirmar Senha",confirmPasswordPlaceholder:"Confirme a senha",newPasswordPlaceholder:"Insira a nova senha",confirmNewPasswordPlaceholder:"Confirme a nova senha",leaveBlankToKeep:"deixe em branco para manter a atual",groups:"Grupos",optional:"opcional",autoGeneratedPassword:"Uma senha segura será gerada automaticamente e enviada por e-mail ao usuário.",passwordManagedByAdvancedAuth:'A senha é gerenciada pela Autenticação Avançada. Use "Redefinir Senha" para enviar uma nova senha ao usuário por e-mail.',resetPassword:"Redefinir Senha",resettingPassword:"Redefinindo Senha..."},deleteModal:{title:"Excluir Usuário",message:"Tem certeza de que deseja excluir este usuário? Esta ação não pode ser desfeita.",confirm:"Excluir Usuário"}},streamOverlay:{title:"Sobreposição de stream",invalidPrinterId:"ID da impressora inválido",cameraStream:"Transmissão da câmera",progress:"Progresso da impressão",eta:"ETA",printerIdle:"Impressora ociosa",printerOffline:"Impressora offline",status:{printing:"Imprimindo",paused:"Pausado",finished:"Concluído",failed:"Falhou",idle:"Ocioso",unknown:"Desconhecido"}},profiles:{title:"Perfis",subtitle:"Gerencie seus presets de fatiador e calibrações de avanço de pressão",tabs:{bambuCloud:"Bambu Cloud",orcaCloud:"Orca Cloud",local:"Perfis Locais",kprofiles:"K-Perfis"},orcaCloud:{connectedAs:"Conectado como",logout:"Desconectar",noLogoutPermission:"Você não tem permissão para desconectar",noConnectPermission:"Você não tem permissão para conectar ao Orca Cloud",retry:"Tentar novamente",back:"Usar outro método de login",connect:{title:"Conectar ao Orca Cloud",description:"Entre na sua conta Orca Cloud para sincronizar seus perfis de slicer no Bambuddy."},providers:{google:"Entrar com Google",apple:"Entrar com Apple",github:"Entrar com GitHub",email:"Entrar com e-mail e senha"},password:{title:"Entrar com e-mail e senha",email:"E-mail",emailPlaceholder:"voce@exemplo.com.br",password:"Senha",submit:"Entrar"},paste:{title:"Concluir login",step1:"Uma nova aba abriu com a página de login do Orca Cloud. Entre com sua conta Orca.",step2:'Seu navegador será redirecionado para uma URL "localhost" que não carregará. Isso é esperado — é dessa URL que precisamos.',step3:"Copie a URL completa da barra de endereços do navegador e cole abaixo.",signInUrl:"Se a aba de login não abriu, clique nesta URL:",label:"Cole a URL de callback aqui",placeholder:"http://localhost:41172/callback?code=...&state=...",submit:"Concluir conexão"},profiles:{title:"Seus perfis do Orca Cloud ({{count}})",refresh:"Atualizar",empty:"Nenhum perfil encontrado na sua conta Orca Cloud ainda."},toast:{connected:"Conectado ao Orca Cloud como {{email}}",disconnected:"Desconectado do Orca Cloud"},errors:{startFailed:"Não foi possível iniciar o login do Orca Cloud.",finishFailed:"Não foi possível concluir o login do Orca Cloud.",passwordFailed:"Não foi possível entrar com esse e-mail e senha.",passwordEmpty:"Insira o e-mail e a senha.",emptyPaste:"Cole a URL de callback do seu navegador.",noCode:"Essa URL não parece ser um callback do Orca Cloud (sem parâmetro code). Copie a URL completa da barra de endereços."}},localProfiles:{title:"Perfis Locais",subtitle:"Importe e gerencie presets de fatiador do OrcaSlicer",import:"Importar Perfis",importDesc:"Solte arquivos .bbscfg, .bbsflmt, .orca_filament, .zip ou .json aqui",importing:"Importando...",search:"Pesquisar presets locais...",noPresets:"Nenhum preset local ainda",noSearchResults:"Nenhum preset corresponde à sua busca",badge:"Local",edit:"Editar",delete:"Excluir",cancel:"Cancelar",deleteConfirmTitle:"Excluir Preset",deleteConfirm:"Tem certeza de que deseja excluir este preset? Esta ação não pode ser desfeita.",source:"Fonte",inheritsFrom:"Herdado de",filamentType:"Tipo",vendor:"Fornecedor",compatiblePrinters:"Impressoras Compatíveis",nozzleTemp:"Temperatura do Bico",cost:"Custo",density:"Densidade",pressureAdvance:"Avanço de Pressão",filament:"Filamento",process:"Processo",printer:"Impressora",toast:{importSuccess:"{{count}} preset(s) importada(s)",importSkipped:"{{count}} preset(s) ignorada(s) (duplicadas)",importError:"{{count}} erro(s) durante a importação",deleted:"Preset excluído",updated:"Preset atualizado"}},connectedAs:"Conectado como",logout:"Sair",noLogoutPermission:"Você não tem permissão para sair",failedToLoad:"Falha ao carregar perfis",retry:"Tentar novamente",time:{justNow:"Agora mesmo",minsAgo:"há {{count}} minutos",hoursAgo:"há {{count}} horas",daysAgo:"há {{count}} dias"},toast:{loggedOut:"Desconectado"},login:{title:"Conectar ao Bambu Cloud",subtitle:"Sincronize seus presets de fatiador entre dispositivos",email:"E-mail",password:"Senha",region:"Região",regionGlobal:"Global",regionChina:"China",verificationCode:"Código de Verificação",totpCode:"Código do Autenticador",checkEmail:"Verifique seu email ({{email}}) para um código de 6 dígitos",enterTotpHint:"Digite o código de 6 dígitos do seu aplicativo autenticador",accessToken:"Token de Acesso",accessTokenHint:"Cole seu token de acesso da Bambu Cloud. Contas da região China precisam usar este caminho (vinculadas ao celular — login por e-mail indisponível). Veja no wiki como obter o token dos cookies do MakerWorld.",back:"Voltar",loginButton:"Entrar",verifyButton:"Verificar",setTokenButton:"Definir Token",useToken:"Usar token de acesso em vez disso",useEmail:"Entrar com email em vez disso",toast:{loggedIn:"Conectado com sucesso",codeSent:"Código de verificação enviado para seu email",enterTotp:"Digite o código do seu aplicativo autenticador",tokenSet:"Token definido com sucesso"}},presets:{myPreset:"Meu preset (editável)",duplicate:"Duplicar",editable:"Editável",failedToLoadDetails:"Falha ao carregar detalhes do preset",deleteConfirm:"Excluir este preset?",deleteWarning:'Isso excluirá permanentemente "{{name}}" do Bambu Cloud. Esta ação não pode ser desfeita.',noDuplicatePermission:"Você não tem permissão para duplicar presets",noEditPermission:"Você não tem permissão para editar presets",noDeletePermission:"Você não tem permissão para excluir presets",types:{filament:"Preset de filamento",printer:"Preset de impressora",process:"Preset de processo"},toast:{deleted:"Preset excluído",created:"Preset criado",updated:"Preset atualizado",duplicated:"Preset duplicado",fieldAdded:'Campo "{{key}}" adicionado',exported:"Preset exportado"},baseLabel:"Base: {{name}}",currentLabel:"Atual: {{name}}",newPreset:"Novo Preset",editPreset:"Editar Preset",duplicatePreset:"Duplicar Preset",createNewPreset:"Criar Novo Preset",customizeSettings:"Personalizar configurações para seu novo preset",compareWithBase:"Comparar com o preset base",compare:"Comparar",basePreset:"Preset Base",selectBasePreset:"Selecionar preset base...",presetName:"Nome do Preset",myCustomPreset:"Meu preset personalizado",inheritsFrom:"Herdado de",dropJsonToImport:"Solte o arquivo JSON para importar",tabs:{common:"Comum",allFields:"Todos os Campos"},availableFields:"Campos Disponíveis",searchFieldsPlaceholder:"Pesquisar campos...",noMatchingFields:"Nenhum campo correspondente",allFieldsAdded:"Todos os campos adicionados",addCustomField:"Adicionar campo personalizado",yourOverrides:"Suas Substituições",noOverridesYet:"Nenhuma substituição ainda",clickFieldsToAdd:"Clique nos campos à esquerda para adicioná-los",saveAsTemplate:"Salvar como modelo",jsonTip:"Dica: Arraste e solte um arquivo .json em qualquer lugar deste modal para importar configurações"},cloudView:{searchPlaceholder:"Pesquisar presets...",templates:"Modelos",refresh:"Atualizar",newPreset:"Novo Preset",clearFilters:"Limpar filtros",compareMode:"Modo de Comparação",selectAnotherPreset:"Selecionar outro preset {{type}}",clickTwoPresets:"Clique em dois presets do mesmo tipo para comparar",selectFirst:"1. Selecionar primeiro",selectSecond:"2. Selecionar segundo",compareNow:"Comparar Agora",lastSynced:"Última sincronização:",showingCount:"Mostrando {{showing}} de {{total}} presets",noPresetsFound:"Nenhum preset encontrado",columns:{filament:"Filamento",process:"Processo",printer:"Impressora"},noFilamentPresets:"Nenhum preset de filamento",noProcessPresets:"Nenhum preset de processo",noPrinterPresets:"Nenhum preset de impressora",filters:{type:"Tipo",owner:"Proprietário",printer:"Impressora",nozzle:"Bico",filament:"Filamento",layer:"Camada",all:"Todos",myPresets:"Meus Presets",builtIn:"Integrado",process:"Processo"},noTemplatesPermission:"Você não tem permissão para gerenciar modelos",noRefreshPermission:"Você não tem permissão para atualizar perfis",noCreatePermission:"Você não tem permissão para criar presets"},templates:{title:"Modelos Rápidos",noTemplates:"Nenhum modelo ainda",createFirst:"Crie modelos a partir do editor de presets",typeFilter:"Tipo:",deleteTitle:"Excluir Modelo",deleteWarning:"Esta ação não pode ser desfeita",deleteConfirm:'Tem certeza de que deseja excluir "{{name}}"?',namePlaceholder:"Nome do modelo",descriptionPlaceholder:"Descrição",settingsJson:"Configurações (JSON)",fieldsCount:"{{count}} campos",shownInModals:"Exibido em modais",hiddenInModals:"Oculto em modais",apply:"Aplicar",toast:{deleted:"Modelo excluído",updated:"Modelo atualizado",created:"Modelo criado",applied:"Modelo aplicado"}}},support:{debugLoggingActive:"Registro de depuração ativo",manageLogs:"Gerenciar",collectItem7:"Conectividade da impressora e versões de firmware",collectItem8:"Status de integração (Spoolman, MQTT, HA)",collectItem9:"Interfaces de rede (somente sub-redes)",collectItem10:"Versões de pacotes Python",collectItem11:"Verificações de integridade do banco de dados",collectItem12:"Detalhes do ambiente Docker",bundleGenerating:"Gerando pacote...",bundleStepConnection:"Executando verificações de conectividade das impressoras",bundleStepVirtualPrinters:"Executando verificações de configuração das impressoras virtuais",bundleStepLogScan:"Analisando registros recentes em busca de problemas conhecidos",bundleStepBuild:"Criando o ZIP do pacote de suporte"},fileManager:{title:"Gerenciador de Arquivos",subtitle:"Organize e gerencie seus arquivos de impressão",uploadFiles:"Enviar Arquivos",newFolder:"Nova Pasta",folderName:"Nome da Pasta",folderNamePlaceholder:"ex.: Peças Funcionais",renameFile:"Renomear Arquivo",renameFolder:"Renomear Pasta",invalidFilenameChar:'O caractere "{{char}}" não é permitido em nomes de arquivos de impressão. O cartão SD da impressora rejeita: < > : " / \\ | ? *',moveFiles:"Mover {{count}} Arquivo(s)",rootNoFolder:"Raiz (Sem Pasta)",current:"Atual",linkFolder:"Vincular Pasta",linkFolderDescription:'Vincular "{{name}}" a um projeto ou arquivo para acesso rápido.',project:"Projeto",archive:"Arquivo",noProjectsFound:"Nenhum projeto encontrado",noArchivesFound:"Nenhum arquivo encontrado",unlink:"Desvincular",link:"Vincular",dragDropFiles:"Arraste e solte os arquivos aqui",dropFilesHere:"Solte os arquivos aqui",orClickToBrowse:"ou clique para procurar",allFileTypesSupported:"Todos os tipos de arquivos são suportados. Arquivos ZIP serão extraídos.",zipFilesDetected:"Arquivos ZIP detectados",zipExtractOptions:"Arquivos ZIP serão extraídos. Escolha como lidar com a estrutura de pastas:",preserveZipStructure:"Preservar estrutura de pastas do ZIP",createFolderFromZip:"Criar pasta a partir do nome do arquivo ZIP",stlThumbnailGeneration:"Geração de miniaturas STL",zipMayContainStl:"Arquivos ZIP podem conter arquivos STL. Miniaturas podem ser geradas durante a extração.",thumbnailsCanBeGenerated:"Miniaturas podem ser geradas para arquivos STL. Modelos grandes podem levar mais tempo para processar.",generateThumbnailsForStl:"Gerar miniaturas para arquivos STL",threemfDetected:"Arquivos 3MF detectados",threemfExtractionInfo:"Modelo da impressora, material, cor e configurações de impressão serão extraídos automaticamente dos arquivos 3MF.",willBeExtracted:"Será extraído",filesExtracted:"{{count}} arquivos extraídos",uploadComplete:"Upload concluído: {{succeeded}} bem-sucedidos",uploadFailed:"Falha no envio",zipFilesFailed:"{{count}} arquivos falharam",uploading:"Enviando...",changeLink:"Alterar link...",linkTo:"Vincular a...",linkToProjectOrArchive:"Vincular a projeto ou arquivo",addToQueue:"Adicionar à fila",schedulePrint:"Agendar impressão",generateThumbnail:"Gerar miniatura",generateThumbnails:"Gerar miniaturas",generateThumbnailsForMissing:"Gerar miniaturas para arquivos STL que não possuem",gridView:"Visualização em grade",listView:"Visualização em lista",lowDiskSpaceWarning:"Aviso de pouco espaço em disco",lowDiskSpaceDetails:"Apenas {{free}} livres de {{total}} no total. O limite está definido para {{threshold}} GB nas configurações.",files:"Arquivos",folders:"Pastas",size:"Tamanho",free:"Livre",allFiles:"Todos os arquivos",allExternal:"Externos",externalIsEmpty:"Nenhum arquivo externo",externalEmptyDescription:"Os arquivos das suas pastas externas vinculadas aparecerão aqui.",wrap:"Quebrar texto",enableTextWrapping:"Ativar quebra de texto",disableTextWrapping:"Desativar quebra de texto",collapse:"Recolher",collapseFoldersByDefault:"Recolher pastas por padrão",expandFoldersByDefault:"Expandir pastas por padrão",dragToResizeTooltip:"Arraste para redimensionar, clique duas vezes para redefinir",searchFiles:"Pesquisar arquivos...",allTypes:"Todos os tipos",prints:"Impressões",ascending:"Crescente",descending:"Decrescente",resultsCount:"{{showing}} de {{total}} arquivos",selectAll:"Selecionar tudo",deselectAll:"Desmarcar tudo",selected:"{{count}} selecionado(s)",adding:"Adicionando...",loadingFiles:"Carregando arquivos...",folderIsEmpty:"A pasta está vazia",noFilesYet:"Nenhum arquivo ainda",folderEmptyDescription:"Envie arquivos ou mova arquivos para esta pasta para começar.",noFilesDescription:"Envie arquivos para começar a organizar seus arquivos relacionados à impressão.",noMatchingFiles:"Nenhum arquivo correspondente",noMatchingFilesDescription:"Nenhum arquivo corresponde aos seus critérios de pesquisa ou filtro.",clearFilters:"Limpar filtros",printedCount:"Impresso {{count}}x",uploadedBy:"Enviado por",deleteFolder:"Excluir pasta",deleteFile:"Excluir arquivo",deleteFilesCount:"Excluir {{count}} arquivos",deleteFolderConfirm:"Tem certeza de que deseja excluir esta pasta? Todos os arquivos dentro também serão excluídos.",deleteFileConfirm:"Tem certeza de que deseja excluir este arquivo?",deleteFilesConfirm:"Tem certeza de que deseja excluir {{count}} arquivos selecionados? Esta ação não pode ser desfeita.",deleting:"Excluindo...",noPermissionRenameFolder:"Você não tem permissão para renomear pastas",noPermissionLinkFolder:"Você não tem permissão para vincular pastas",noPermissionDeleteFolder:"Você não tem permissão para excluir pastas",noPermissionPrint:"Você não tem permissão para imprimir",noPermissionSlice:"Você não tem permissão para fatiar arquivos",noPermissionAddToQueue:"Você não tem permissão para adicionar à fila",noPermissionDownload:"Você não tem permissão para baixar arquivos",noPermissionRenameFile:"Você não tem permissão para renomear este arquivo",noPermissionGenerateThumbnail:"Você não tem permissão para gerar miniaturas",noPermissionDeleteFile:"Você não tem permissão para excluir este arquivo",noPermissionCreateFolder:"Você não tem permissão para criar pastas",noPermissionUpload:"Você não tem permissão para enviar arquivos",noPermissionMoveFiles:"Você não tem permissão para mover arquivos",noPermissionDeleteFiles:"Você não tem permissão para excluir arquivos",linkExternal:"Vincular externo",linkExternalFolder:"Vincular pasta externa",linkExternalFolderDescription:"Montar um diretório do host (NAS, USB, compartilhamento de rede) no Gerenciador de Arquivos. Os arquivos não são copiados — são acessados diretamente do caminho original.",externalFolderNamePlaceholder:"ex. Impressões NAS",externalPath:"Caminho do host",externalPathHelp:"Caminho absoluto do diretório no host Docker. Deve estar montado como bind no contêiner.",readOnly:"Somente leitura",readOnlyHelp:"impede uploads e exclusões",showHiddenFiles:"Mostrar arquivos ocultos (arquivos ponto)",externalFolder:"Pasta externa",scanFolder:"Escanear",toast:{folderCreated:"Pasta criada",folderDeleted:"Pasta excluída",fileDeleted:"Arquivo excluído",filesDeleted:"Excluídos {{count}} arquivos",filesMoved:"Arquivos movidos",folderLinked:"Pasta vinculada",folderUnlinked:"Pasta desvinculada",externalFolderLinked:"Pasta externa vinculada e escaneada",folderScanned:"Escaneamento concluído: {{added}} adicionados, {{removed}} removidos",addedToQueue:"Adicionado {{count}} arquivo(s) à fila",addedToQueuePartial:"Adicionado {{added}} arquivo(s), {{failed}} falharam",failedToAddToQueue:"Falha ao adicionar arquivos: {{error}}",fileRenamed:"Arquivo renomeado",folderRenamed:"Pasta renomeada",thumbnailsGenerated:"Geradas {{count}} miniatura(s)",thumbnailsGeneratedPartial:"Geradas {{succeeded}} miniatura(s), {{failed}} falharam",noStlMissingThumbnails:"Nenhum arquivo STL sem miniatura",failedToGenerateThumbnails:"Falha ao gerar miniaturas: {{error}}",thumbnailGenerated:"Miniatura gerada",failedToGenerateThumbnail:"Falha ao gerar miniatura: {{error}}"}},projects:{title:"Projetos",subtitle:"Organize e acompanhe seus projetos de impressão 3D",newProject:"Novo Projeto",editProject:"Editar Projeto",deleteProject:"Excluir Projeto",projectName:"Nome do Projeto",description:"Descrição",noProjects:"Nenhum projeto ainda",noProjectsFiltered:"Nenhum projeto {{status}}",noProjectsFilteredHelp:"Você não tem nenhum projeto {{status}}. Os projetos aparecerão aqui quando seu status mudar.",createFirst:"Crie seu primeiro projeto para começar a organizar impressões relacionadas, acompanhar o progresso e gerenciar suas construções.",createFirstButton:"Crie Seu Primeiro Projeto",create:"Criar",files:"Arquivos",prints:"Impressões",plates:"Placas",parts:"Peças",lastModified:"Última Modificação",deleteConfirm:"Tem certeza de que deseja excluir este projeto? Arquivos e itens da fila serão desvinculados, mas não excluídos.",addFiles:"Adicionar Arquivos",removeFile:"Remover Arquivo",viewDetails:"Ver Detalhes",namePlaceholder:"ex., Voron 2.4 Build",descriptionPlaceholder:"Descrição opcional...",urlLabel:"URL",urlPlaceholder:"https://makerworld.com/...",urlInvalid:"A URL deve começar com http:// ou https://",openExternalUrl:"Abrir URL do projeto",coverImageLabel:"Imagem de capa",coverImageAlt:"Imagem de capa do projeto",coverImageUpload:"Enviar",coverImageReplace:"Substituir",coverImageRemove:"Remover",color:"Cor",targetPlates:"Placas Alvo",targetPlatesPlaceholder:"ex., 25",targetPlatesHelp:"Número de trabalhos de impressão",targetParts:"Peças Alvo",targetPartsPlaceholder:"ex., 150",targetPartsHelp:"Total de objetos necessários",tagsLabel:"Tags (separadas por vírgula)",tagsPlaceholder:"ex., voron, funcional, presente",dueDate:"Data de Vencimento",priority:"Prioridade",priorityLow:"Baixa",priorityNormal:"Normal",priorityHigh:"Alta",priorityUrgent:"Urgente",statusActive:"Ativo",statusCompleted:"Concluído",statusArchived:"Arquivado",done:"Concluído",completed:"Concluído",failed:"Falhou",inQueue:"Na fila",noPrintsYet:"Nenhuma impressão ainda",printJobs:"Trabalhos de impressão (placas)",partsPrinted:"Peças impressas",failedParts:"Peças falhadas",import:"Importar",export:"Exportar",importProject:"Importar projeto",exportAll:"Exportar todos os projetos",loading:"Carregando projetos...",noEditPermission:"Você não tem permissão para editar projetos",noDeletePermission:"Você não tem permissão para excluir projetos",noCreatePermission:"Você não tem permissão para criar projetos",noImportPermission:"Você não tem permissão para importar projetos",noExportPermission:"Você não tem permissão para exportar projetos",toast:{created:"Projeto criado",updated:"Projeto atualizado",deleted:"Projeto excluído",imported:"Projeto importado",multipleImported:"{{count}} projetos importados",importFailed:"Falha na importação",exported:"Projetos exportados (apenas metadados)"}},projectDetail:{notFound:"Projeto não encontrado",backToProjects:"Voltar para Projetos",export:"Exportar",exportProject:"Exportar projeto",noExportPermission:"Você não tem permissão para exportar projetos",noEditPermission:"Você não tem permissão para editar projetos",partOf:"Parte de:",priorityLabel:"Prioridade:",noPrints:"Nenhuma impressão neste projeto ainda",status:{active:"Ativo",completed:"Concluído",archived:"Arquivado"},priority:{low:"Baixa",normal:"Normal",high:"Alta",urgent:"Urgente"},dueDate:{overdue:"Atrasado",today:"Vence hoje",daysLeft:"{{count}} dias restantes"},progress:{platesProgress:"Progresso das Placas",partsProgress:"Progresso das Peças",printJobs:"Trabalhos de Impressão",parts:"Peças",percentComplete:"{{percent}}% concluído",remaining:"{{count}} restantes"},stats:{printJobs:"Trabalhos de Impressão",total:"total",failed:"{{count}} falhou",partsPrinted:"{{count}} peças impressas",printTime:"Tempo de Impressão",filamentUsed:"Filamento Usado"},cost:{title:"Rastreamento de Custos",filamentCost:"Custo do Filamento",energy:"Energia",totalCost:"Custo Total",total:"Total",includesBom:"incl. lista de materiais",budget:"Orçamento",remaining:"Restante"},subProjects:{title:"Sub-projetos ({{count}})"},notes:{title:"Notas",noEditPermission:"Você não tem permissão para editar notas",placeholder:"Adicione notas sobre este projeto...",empty:"Nenhuma nota ainda. Clique em Editar para adicionar notas."},files:{title:"Arquivos",linkFolders:"Vincular pastas do Gerenciador de Arquivos",forQuickAccess:"a este projeto para acesso rápido.",fileCount:"{{count}} arquivo(s)",empty:"Nenhuma pasta vinculada. Vá para o Gerenciador de Arquivos e vincule uma pasta a este projeto.",noFiles:"Nenhum arquivo nesta pasta.",print:"Imprimir agora",addToQueue:"Adicionar à fila"},bom:{title:"Lista de Materiais",acquired:"{{completed}}/{{total}} adquiridos",showAll:"Mostrar todos",hideDone:"Ocultar concluídos",addPart:"Adicionar Peça",noAddPermission:"Você não tem permissão para adicionar peças",partNamePlaceholder:"Nome da peça (ex.: parafusos M3x8)",partName:"Nome da peça",qty:"Quantidade",price:"Preço ({{currency}})",sourcingUrlPlaceholder:"URL de fornecimento (opcional)",remarksPlaceholder:"Observações (opcional)",deletePart:"Excluir Peça",deleteConfirm:'Tem certeza de que deseja excluir "{{name}}"?',noUpdatePermission:"Você não tem permissão para atualizar peças",noEditPermission:"Você não tem permissão para editar peças",noDeletePermission:"Você não tem permissão para excluir peças",totalCost:"Custo total:",empty:"Nenhuma peça na lista de materiais. Adicione hardware, eletrônicos ou outros componentes para rastrear o que precisa ser adquirido."},timeline:{title:"Linha do Tempo de Atividades",empty:"Nenhuma atividade ainda."},template:{saveAsTemplate:"Salvar como Modelo",noCreatePermission:"Você não tem permissão para criar modelos"},queue:{title:"Fila",viewAll:"Ver todos",printing:"{{count}} imprimindo",queued:"{{count}} na fila"},prints:{title:"Impressões ({{count}})"},toast:{projectUpdated:"Projeto atualizado",partAdded:"Peça adicionada",partRemoved:"Peça removida",exportFailed:"Falha na exportação",projectExported:"Projeto exportado",templateCreated:"Modelo criado"}},system:{title:"Informações do Sistema",version:"Versão",uptime:"Tempo de Atividade",cpuUsage:"Uso da CPU",memoryUsage:"Uso da Memória",diskUsage:"Uso do Disco",networkInfo:"Informações de Rede",logs:"Registros",debugMode:"Modo de Depuração",enableDebug:"Ativar Registro de Depuração",disableDebug:"Desativar Registro de Depuração",downloadLogs:"Baixar Logs",clearLogs:"Limpar Logs",dockerInfo:"Informações do Docker",containerName:"Nome do Contêiner",imageName:"Nome da Imagem",platform:"Plataforma",architecture:"Arquitetura"},library:{title:"Biblioteca de Filamentos",addFilament:"Adicionar Filamento",editFilament:"Editar Filamento",deleteFilament:"Excluir Filamento",vendor:"Fornecedor",material:"Material",color:"Cor",kFactor:"Fator K",temperature:"Temperatura",noFilaments:"Nenhum filamento na biblioteca",deleteConfirm:"Tem certeza de que deseja excluir este filamento?",importFromPrinter:"Importar da Impressora",exportToFile:"Exportar para Arquivo"},slice:{title:"Fatiar modelo",action:"Fatiar",actionAll:"Fatiar todas as {{count}} bandejas",actionAllTitle:"Fatiar todas as bandejas em uma saída multi-bandeja única (um único arquivo). A seleção de filamento cobre cada slot definido pelo projeto.",allPlatesToggle:"Fatiar todas as {{count}} bandejas",slicing:"Fatiando…",printer:"Perfil de impressora",process:"Perfil de processo",filament:"Perfil de filamento",filamentSlot:"Filamento {{index}} ({{type}})",selectPreset:"— Selecione uma predefinição —",loadingPresets:"Carregando predefinições…",analyzingPlateFilaments:"Analisando filamentos da mesa…",analyzingPlateFilamentsHint:"Executando uma fatia de pré-visualização para descobrir quais slots AMS esta mesa usa. Cacheado depois — reabrir é instantâneo.",previewToast:"Analisando {{name}} – {{elapsed}}",previewWithProgress:"Analisando {{name}} – {{stage}} ({{percent}}%) – {{elapsed}}",notUsedByPlate:"— não usado por esta mesa",noPresetsForSlot:"Nenhuma predefinição disponível",otherPrinters:"Outras impressoras",presetsLoadFailed:"Falha ao carregar predefinições. Abra Configurações → Perfis para importá-las primeiro.",refreshPresets:"Atualizar",refreshPresetsTitle:"Atualizar predefinições — buscar as listagens mais recentes da nuvem e dos pacotes (use após excluir uma predefinição no Bambu Studio ou Bambu Handy)",allPresetsRequired:"Todas as predefinições devem ser selecionadas",bundle:"Pacote do fatiador",bundleNone:"— Nenhum (escolher predefinições individualmente) —",bundleAllRequired:"O processo do pacote e cada slot de filamento devem ser escolhidos",enqueuing:"Enviando trabalho de fatiamento…",queued:"Na fila…",failed:"Falha ao fatiar. Verifique os logs do sidecar.",startedToast:"Fatiando {{name}} em segundo plano…",queuedToast:"Na fila: {{name}} – {{elapsed}}",runningToast:"Fatiando {{name}} – {{elapsed}}",runningWithProgress:"{{name}} – {{stage}} ({{percent}}%) – {{elapsed}}",runningWithProgressMultiPlate:"Bandeja {{plateIndex}} de {{plateCount}} • {{name}} – {{stage}} ({{percent}}%) – {{elapsed}}",completedToast:"{{name}} fatiado",failedTitle:"Falha ao fatiar",failedToast:"Falha ao fatiar {{name}}: {{detail}}",tier:{local:"Importado",cloud:"Bambu Cloud",orcaCloud:"Orca Cloud",standard:"Padrão"},cloud:{notAuthenticated:"Faça login no Bambu Cloud (Configurações → Perfis → Bambu Cloud) para ver as predefinições.",expired:"Sessão do Bambu Cloud expirou – faça login novamente para atualizar as predefinições.",unreachable:"Bambu Cloud está inacessível agora. Predefinições locais e padrão ainda funcionam."},orcaCloud:{notAuthenticated:"Entre no Orca Cloud (Perfis → Orca Cloud) para ver seus presets Orca.",expired:"Sessão do Orca Cloud expirada — entre novamente para atualizar seus presets Orca.",unreachable:"Orca Cloud está indisponível no momento. Outros presets continuam funcionando."},bedType:{label:"Mesa de impressão",auto:"Auto (usar predefinição de processo)",coolPlate:"Cool Plate",coolPlateSuperTack:"Cool Plate SuperTack",engineering:"Engineering Plate",highTemp:"High Temp Plate",texturedPEI:"Textured PEI Plate",smoothPEI:"Smooth PEI Plate"}},spoolman:{title:"Integração com Spoolman",enabled:"Spoolman Ativado",url:"URL do Spoolman",connected:"Conectado",disconnected:"Não Conectado",testConnection:"Testar Conexão",sync:"Sincronizar",syncing:"Sincronizando...",lastSync:"Última Sincronização",linkToSpoolman:"Vincular ao Spoolman",openInSpoolman:"Abrir no Spoolman",unlinkSpool:"Desvincular Carretel",unlinkConfirmTitle:"Remover atribuição do carretel?",unlinkConfirmMessage:"Isso removerá o carretel deste slot. Os dados do próprio carretel permanecerão inalterados.",selectSpool:"Selecionar Carretel",noUnlinkedSpools:"Nenhum carretel não atribuído disponível",linkSuccess:"Carretel atribuído com sucesso",linkFailed:"Falha ao atribuir carretel",unlinkSuccess:"Atribuição do carretel removida com sucesso",unlinkFailed:"Falha ao remover atribuição do carretel",linkedSpool:"Carretel atribuído",spoolId:"Carretel ID (Spool ID)",fillSourceLabel:"(Spoolman)",weight:"Peso",remaining:"Restante",disableWeightSync:"Desativar Sincronização de Peso Estimado do AMS",disableWeightSyncDesc:"Não atualize a capacidade restante a partir das estimativas do AMS. Use isso se preferir o rastreamento de uso do Spoolman em vez das estimativas baseadas em porcentagem do AMS. Novos carretéis ainda usarão a estimativa do AMS como seu peso inicial.",reportPartialUsage:"Relatar Uso Parcial para Impressões Falhadas",reportPartialUsageDesc:"Quando uma impressão falha ou é cancelada, relate o filamento estimado usado até aquele ponto com base no progresso das camadas."},inventory:{title:"Inventário de Carretéis",subtitle:"Gerencie seus carretéis",spoolmanMixedContentTitle:"Spoolman não pode carregar em HTTPS — conteúdo misto bloqueado pelo navegador",spoolmanMixedContentBody:"O Bambuddy é servido via HTTPS (pelo seu reverse proxy), mas a URL do Spoolman ainda é HTTP. Os navegadores bloqueiam conteúdo misto por segurança, então a interface embutida do Spoolman não consegue carregar. O Spoolman também precisa estar acessível via HTTPS.",spoolmanMixedContentFixReverseProxy:"Coloque o Spoolman atrás do mesmo reverse proxy do Bambuddy (Traefik / Nginx / Caddy) com HTTPS e atualize a URL do Spoolman em Configurações com o novo endereço HTTPS.",spoolmanMixedContentFixOpenNewTab:"Como alternativa, abra o Spoolman em uma nova aba via HTTP — as regras de conteúdo misto só se aplicam a frames embutidos, uma aba independente funciona normalmente.",spoolmanOpenInNewTab:"Abrir Spoolman em nova aba",labels:{title:"Imprimir etiquetas de bobinas",selectedCount:"{{count}} selecionado",pickSpools:"Escolha para quais bobinas imprimir etiquetas:",searchPlaceholder:"Buscar por nome, marca ou #ID",filterByMaterial:"Material:",allMaterials:"Tudo",selectVisible:"Selecionar todos visíveis ({{count}})",deselectVisible:"Desmarcar visíveis",clearAll:"Limpar tudo",noSpoolsToShow:"Nenhuma bobina para mostrar. Ajuste o filtro e tente novamente.",noMatches:"Nenhuma bobina corresponde à pesquisa ou filtro atual.",printOne:"Imprimir etiqueta desta bobina",printLabels:"Imprimir etiquetas…",bulkTitle:"Escolha bobinas para etiquetar entre as {{count}} exibidas",noSpoolsTitle:"Nenhuma bobina para rotular",error:"Não foi possível gerar etiquetas: {{msg}}",sortBy:{label:"Ordenar:",id:"Por ID",color:"Por cor"},templates:{amsHolderSmall:{label:"Suporte AMS — pequeno (74 × 33 mm)",hint:"Uma etiqueta por página; corresponde à etiqueta imprimível do modelo MakerWorld 752566 (Suporte de etiquetas de filamento AMS)."},amsHolderLarge:{label:"Suporte AMS — grande (75 × 55 mm)",hint:"Uma etiqueta por página; encaixa na variante com inserto em cartão do Suporte de etiquetas de filamento AMS. Espaço suficiente para amostra de cor, marca, material, ID e QR code."},box40x30:{label:"Etiqueta de caixa (40 × 30 mm)",hint:"Uma etiqueta por página; tamanho comum de rolo DK/Brother, ideal para etiquetar sacos de filamento e caixas de armazenamento."},box:{label:"Box label (62 × 29 mm)",hint:"Uma etiqueta por página; tamanho para Brother PT/QL e etiquetas pequenas Dymo."},averyL7160:{label:"Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)",hint:"Formato de folha UE; 21 etiquetas por página A4."},avery5160:{label:"Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)",hint:"Formato de folha US; 30 etiquetas por página Letter."}}},addSpool:"Adicionar Carretel",editSpool:"Editar Carretel",copySpool:"Copiar Carretel",material:"Material",selectMaterial:"Selecionar material...",subtype:"Subtipo",brand:"Marca",searchBrand:"Pesquisar marca...",useCustomBrand:'Usar "{{brand}}"',useCustomMaterial:"Usar material personalizado: {{material}}",colorName:"Nome da Cor",colorNamePlaceholder:"Branco Jade, Vermelho Fogo...",color:"Cor",hexColor:"Cor Hexadecimal",pickColor:"Escolher cor personalizada",labelWeight:"Peso da Etiqueta",coreWeight:"Peso do Carretel Vazio",searchSpoolWeight:"Pesquisar peso do carretel...",weightUsed:"Usado",currentWeight:"Peso Restante",measuredWeight:"Peso Medido",spoolName:"Bobina",costPerKg:"Custo por kg",storageLocation:"Local de armazenamento",storageLocationPlaceholder:"ex. Prateleira A, Gaveta 1",openInInventory:"Abrir no inventário",measuredWeightError:"O peso medido deve estar entre {{min}}g e {{max}}g.",slicerFilament:"Filamento do Fatiador",slicerFilamentName:"Nome do Predefinido do Fatiador",slicerPreset:"Predefinido do Fatiador",searchPresets:"Pesquisar predefinições de filamento...",selectedPreset:"Selecionado",noPresetsFound:"Nenhuma predefinição encontrada",tempOverrides:"Substituições de Temperatura",note:"Nota",notePlaceholder:"Quaisquer notas adicionais sobre este spool...",category:"Categoria",categoryPlaceholder:"ex. Produção, Protótipo, Cliente A",categoryNone:"Sem categoria",storageLocationNone:"Sem local definido",lowStockThresholdOverride:"Limite de estoque baixo (este carretel)",lowStockThresholdOverrideHelp:"Deixe em branco para usar o limite global ({{global}}%).",clearRfid:"Limpar tag RFID",rfidCleared:"Tag RFID limpa",archive:"Arquivar",restore:"Restaurar",noSpools:"Nenhum carretel ainda. Adicione seu primeiro carretel para começar.",noAvailableSpools:"Nenhum carretel disponível. Adicione um carretel ao seu inventário ou desatribua um de outro slot primeiro.",kProfiles:"K-Perfis",addKProfile:"Adicionar K-Perfil",assignSpool:"Atribuir Carretel",unassignSpool:"Desatribuir",assignSuccess:"Carretel atribuído e slot AMS configurado",assignFailed:"Falha ao atribuir carretel",selectSpool:"Selecione um carretel para atribuir a este slot",assigned:"Atribuído",assigning:"Atribuindo...",searchSpools:"Pesquisar carretéis...",showAllSpools:"Mostrar todos os carretéis",spoolmanSpools:"Bobinas Spoolman",allMaterials:"Todos os Materiais",filterByBrand:"Filtrar por marca...",showArchived:"Mostrar arquivados",quickAdd:"Adição rápida (Estoque)",quantity:"Quantidade",stock:"Estoque",configured:"Configurado",spoolsCreated:"{{count}} carretéis criados",spoolsPartiallyCreated:"{{created}} de {{total}} carretéis criados (alguns falharam)",spoolCreated:"Carretel criado",spoolUpdated:"Carretel atualizado",spoolDeleted:"Carretel excluído",deepLinkSpoolNotFound:"Carretel não encontrado",deepLinkFetchFailed:"Não foi possível carregar o carretel — tente novamente",spoolArchived:"Carretel arquivado",spoolRestored:"Carretel restaurado",kProfileSaveFailed:"Não foi possível salvar as configurações do perfil K",syncWeightSpoolNotFound:"Carretel não encontrado — pode ter sido excluído",syncWeightSpoolmanUnreachable:"Spoolman está inacessível — tente novamente mais tarde",syncWeightFailed:"Falha ao sincronizar o peso",spoolmanUnreachable:"Spoolman está inacessível — tente novamente mais tarde",deleteSpoolNotFound:"Carretel não encontrado — pode já ter sido excluído",deleteFailed:"Falha ao excluir carretel",archiveSpoolNotFound:"Carretel não encontrado — pode já ter sido excluído",archiveFailed:"Falha ao arquivar carretel",restoreSpoolNotFound:"Carretel não encontrado — pode já ter sido excluído",restoreFailed:"Falha ao restaurar carretel",saveFailed:"Falha ao salvar as alterações",tagClearFailed:"Falha ao limpar a tag",deleteConfirm:"Tem certeza de que deseja excluir este carretel? Esta ação não pode ser desfeita.",archiveConfirm:"Tem certeza de que deseja arquivar este carretel?",advancedSettings:"Configurações Avançadas",filamentInfoTab:"Informações do Filamento",paProfileTab:"Perfil PA",filamentInfo:"Filamento",additional:"Adicional",loadingPresets:"Carregando predefinições da nuvem...",cloudConnected:"Nuvem conectada",cloudNotConnected:"Nuvem não conectada (usando padrões)",recentColors:"Recentes",searchColors:"Pesquisar cores...",searchResults:"Resultados da pesquisa",allColors:"Todas as cores",commonColors:"Cores comuns",showLess:"Mostrar menos",showAll:"Mostrar tudo",noColorsFound:"Nenhuma cor corresponde à sua pesquisa",noResults:"Nenhum resultado encontrado",extraColorsLabel:"Cores extras",extraColorsPlaceholder:"EC984C,#6CD4BC,A66EB9,D87694",extraColorsHint:"Cole 2 a 8 paradas hex, separadas por vírgulas. Renderizado como gradiente.",extraColorsInvalid:"Hex inválidos ignorados: {{tokens}}",colorEffectLabel:"Efeito",colorEffect:{none:"Nenhum",sparkle:"Brilho",wood:"Madeira",marble:"Mármore",glow:"Brilho",matte:"Fosco",silk:"Silk",galaxy:"Galáxia",rainbow:"Arco-íris",metal:"Metal",translucent:"Translúcido",gradient:"Gradiente",dualColor:"Dupla cor",triColor:"Tricolor",multicolor:"Multicolor"},selectMaterialFirst:"Por favor, selecione um material primeiro na aba Informações do Filamento.",noPrintersConfigured:"Nenhuma impressora configurada. Adicione impressoras para usar perfis PA.",matchingFilter:"Correspondente",anyBrand:"Qualquer marca",anyVariant:"Qualquer variante",autoSelect:"Seleção automática",matches:"correspondências",match:"correspondência",noMatches:"Nenhuma correspondência",connected:"Conectado",offline:"Offline",printerOffline:"A impressora está offline. Conecte-se para visualizar os perfis de calibração.",noKProfilesMatch:"Nenhum K-perfil corresponde ao filamento selecionado.",leftNozzle:"Bico Esquerdo",rightNozzle:"Bico Direito",profilesSelected:"perfil(is) de calibração selecionado(s)",totalInventory:"Inventário Total",totalConsumed:"Total Consumido",byMaterial:"Por Material",inPrinter:"Na Impressora",lowStock:"Estoque Baixo",sinceTracking:"Desde o início do rastreamento",resetConsumedCounter:"Zerar contador",resetConsumedCounterTooltip:"Zerar o contador de gramas consumidas desta bobina. O peso restante não é alterado.",resetConsumedCounterConfirm:"Zerar o contador de gramas consumidas desta bobina? As impressões futuras voltarão a contar do zero. A bobina em si, o cálculo do peso restante e as configurações não são alterados.",resetAllConsumedCounters:"Zerar todos os contadores",resetAllConsumedCountersTooltip:"Zerar o contador de gramas consumidas em todas as bobinas. Os pesos restantes não são alterados.",resetAllConsumedCountersConfirm:'Zerar o contador de gramas consumidas nas {{count}} bobinas (incluindo as arquivadas)? Isso limpa o "Total Consumido" para que as impressões futuras contem do zero. Bobinas e pesos restantes não são alterados.',consumedCounterReset:"Contador zerado",allConsumedCountersReset:"Contador zerado em {{count}} bobina(s)",resetConsumedCounterFailed:"Falha ao zerar o contador",loadedInAms:"Carregado no AMS/Ext",remaining:"Restante",weightCheck:"Verificação de Peso",lastWeighed:"Última pesagem",neverWeighed:"Nunca pesado",search:"Pesquisar carretéis...",showing:"Mostrando",to:"até",of:"de",show:"Mostrar",spools:"carretéis",spool:"carretel",page:"Página",noSpoolsMatch:"Nenhum resultado encontrado",noSpoolsMatchDesc:"Tente ajustar sua pesquisa ou filtros para encontrar o que você está procurando.",active:"Ativo",archived:"Arquivado",all:"Todos",used:"Usado",new:"Novo",clearFilters:"Limpar filtros",table:"Tabela",cards:"Cartões",net:"Líquido",groupSimilar:"Agrupar",groupedSpools:"{{count}} carretéis idênticos",groupedRows:"linhas",columns:"Colunas",configureColumns:"Configurar Colunas",configureColumnsDesc:"Arraste para reordenar as colunas ou use as setas. Alterne a visibilidade com o ícone de olho.",visible:"Visível",reset:"Redefinir",cancel:"Cancelar",applyChanges:"Aplicar Alterações",moveUp:"Mover para cima",moveDown:"Mover para baixo",hideColumn:"Ocultar coluna",showColumn:"Mostrar coluna",linkToSpool:"Vincular ao Carretel",tagLinked:"Tag vinculada ao carretel",tagLinkFailed:"Falha ao vincular tag",tagAlreadyLinked:"Tag já vinculada a outro carretel",unknownTag:"Tag RFID desconhecida detectada",usageHistory:"Histórico de Uso",noUsageHistory:"Nenhum uso registrado ainda",printName:"Nome da Impressão",weightConsumed:"Peso Consumido",clearHistory:"Limpar",historyCleared:"Histórico de uso limpo",fillSourceLabel:"(Inv)",lowStockThresholdError:"O limite deve estar entre 0.1 e 99.9",assignMismatchTitle:"Incompatibilidade de material",assignMismatchMessage:'O material do carretel selecionado "{{spoolMaterial}}" não corresponde ao material da bandeja "{{trayMaterial}}" para {{location}}. Atribuir mesmo assim?',assignMismatchConfirm:"Atribuir mesmo assim",assignPartialMismatchMessage:'O material do carretel "{{spoolMaterial}}" é semelhante, mas não corresponde exatamente a "{{trayMaterial}}" em {{location}}. Deseja prosseguir?',assignProfileMismatchMessage:'O perfil do carretel "{{spoolProfile}}" não corresponde ao perfil da bandeja "{{trayProfile}}" em {{location}}. Deseja prosseguir?',assignReconfigureNote:"O slot do AMS será reconfigurado para usar o perfil do carretel.",spoolmanFilamentCatalog:"Catálogo de filamentos Spoolman",pickFromSpoolmanCatalog:"Escolher do catálogo Spoolman…",spoolmanFilamentSelected:"Filamento selecionado do catálogo Spoolman",spoolmanFilamentUnlinked:"Vínculo com o catálogo de filamentos removido",noSpoolmanFilaments:"Nenhum filamento encontrado no catálogo Spoolman",spoolmanFilamentColorSwatch:"Cor do filamento",spoolWeightManagedBySpoolman:"O peso do carretel vazio é gerenciado por tipo de filamento no Spoolman",spoolmanCatalogLoadFailed:"Falha ao carregar catálogo de filamentos do Spoolman"},timelapse:{title:"Timelapse",create:"Criar Timelapse",download:"Baixar",delete:"Excluir",preview:"Visualizar",frameRate:"Taxa de Quadros",quality:"Qualidade",processing:"Processando...",noTimelapses:"Nenhum timelapse disponível"},ams:{title:"AMS",slot:"Slot",empty:"Vazio",emptySlot:"Slot vazio",slotEmpty:"Vazio",emptySlotReset:"Nenhum carretel atribuído",unknown:"Desconhecido",humidity:"Umidade",temperature:"Temperatura",filamentType:"Tipo de Filamento",filamentColor:"Cor",remaining:"Restante",history:"Histórico do AMS",noHistory:"Nenhum histórico disponível",configureSlot:"Configurar Slot",externalSpool:"Carretel Externo",profile:"Perfil",kFactor:"Fator K",fill:"Preencher",configure:"Configurar",used:"usado",remainingUnit:"restante"},printModal:{title:"Iniciar Impressão",selectPrinter:"Selecionar Impressora",selectPlate:"Selecionar Placa",filamentMapping:"Mapeamento de Filamento",totalCost:"Custo total:",slotRemainingShort:" - {{grams}}g rest.",printSettings:"Configurações de Impressão",bedLeveling:"Nivelamento da Mesa",flowCalibration:"Calibração de Fluxo",vibrationCalibration:"Calibração de Vibração",layerInspection:"Inspeção da Primeira Camada",timelapse:"Timelapse",startPrint:"Iniciar Impressão",addToQueue:"Adicionar à Fila",cancel:"Cancelar",noPrintersAvailable:"Nenhuma impressora disponível",printerBusy:"Impressora ocupada",printerOffline:"Impressora offline",sameTypeDifferentColor:"Mesmo tipo, cor diferente",filamentTypeNotLoaded:"Tipo de filamento não carregado",openCalendar:"Abrir calendário",leftNozzle:"L",rightNozzle:"R",leftNozzleTooltip:"Bico esquerdo",rightNozzleTooltip:"Bico direito",filamentOverride:"Substituição de Filamento",filamentOverrideHint:"Substitua opcionalmente os filamentos para atribuição baseada em modelo. O agendador usará os filamentos selecionados em vez dos valores originais do 3MF.",originalFilament:"Original",overrideWith:"Substituir por",resetToOriginal:"Restaurar original",insufficientFilamentTitle:"Filamento insuficiente",insufficientFilamentMessage:"Alguns dos carretéis atribuídos têm menos filamento restante do que o necessário para esta impressão:",insufficientFilamentLine:"{{printer}} - {{slot}}: necessário {{required}}g, restante {{remaining}}g",printAnyway:"Imprimir mesmo assim",forceColorMatch:"Forçar correspondência de cor",staggerPrinterStarts:"Escalonar inícios",staggerGroupSize:"Tamanho do grupo",staggerInterval:"Intervalo (min)",staggerPreview:"{{printers}} impressoras → {{groups}} grupos de {{size}}, iniciando a cada {{interval}} min",staggerLastGroup:"último grupo: {{count}}",staggerTotal:"total: {{minutes}} min",staggerToPrinters:"Escalonar para {{count}} impressoras",gcodeInjection:"Injetar G-code de auto-impressão"},backup:{includesEncryptionKey:"Backups locais incluem o arquivo da chave de criptografia MFA (DATA_DIR/.mfa_encryption_key), então o backup ZIP é autossuficiente. Trate o ZIP como sensível — quem tiver o arquivo pode descriptografar os client secrets OIDC e os segredos TOTP armazenados.",title:"Bakup e Restauração",createBackup:"Criar Backup",restoreBackup:"Restaurar Backup",restoreDescription:"Substituir todos os dados a partir de um arquivo de backup",downloadBackup:"Baixar Backup",uploadBackup:"Enviar Backup",lastBackup:"Último Backup",autoBackup:"Backup automático",backupNow:"Fazer Backup Agora",restoreWarning:"Aviso: Restaurar um backup substituirá todos os dados atuais.",includeArchives:"Incluir Arquivos",includeSettings:"Incluir Configurações",includeProfiles:"Incluir Perfis",backupSuccess:"Backup criado com sucesso",restoreSuccess:"Backup restaurado com sucesso",backupFailed:"Falha ao criar backup",restoreFailed:"Falha ao restaurar backup",restoreNote:"A impressora virtual será parada durante a restauração",githubBackup:"Backup GitHub",enabled:"Ativado",cloudLoginRequired:"Login no Bambu Cloud necessário. Entre em Perfis → Perfis Cloud para ativar o backup GitHub.",cloudLoginRequiredShort:"Login Cloud necessário",githubDescription:"Sincronize automaticamente seus perfis com um repositório GitHub privado para backup e histórico de versões.",repoIsPrivate:"O repositório é privado — seguro para backup.",repoIsPublicWarning:"O repositório está PÚBLICO. Os backups do Bambuddy incluem credenciais MQTT, tokens do Home Assistant, tokens do Prometheus, seu e-mail do Bambu Cloud e os códigos de acesso das impressoras via K-profiles. Salvar está bloqueado até que você torne o repositório privado nas configurações do seu provedor.",repoVisibilityUnknown:"Não foi possível determinar a visibilidade do repositório. O Bambuddy se recusa a fazer backup em qualquer destino não confirmado como privado; salvar será bloqueado.",repositoryUrl:"URL do repositório",repoUrlPlaceholderGitHub:"https://github.com/username/repo-name",repoUrlPlaceholderGitea:"https://gitea.example.com/username/repo-name",repoUrlPlaceholderForgejo:"https://forgejo.example.com/username/repo-name",repoUrlPlaceholderGitLab:"https://gitlab.com/username/repo-name",allowInsecureHttp:"Permitir HTTP inseguro",allowInsecureHttpHint:"Ativar para instâncias auto-hospedadas em redes privadas sem TLS",personalAccessToken:"Token de acesso pessoal",tokenSaved:"(salvo)",enterNewToken:"Digite um novo token para atualizar",tokenHint:"Token de granularidade fina com permissão de leitura/escrita de conteúdo",branch:"Branch",provider:"Provedor Git",providerGitHub:"GitHub",providerGitLab:"GitLab",providerGitea:"Gitea",providerForgejo:"Forgejo",manualOnly:"Apenas manual",hourly:"A cada hora",daily:"Diário",weekly:"Semanal",includeInBackup:"Incluir no backup",kProfiles:"K-Perfis",kProfilesDescription:"Calibração de avanço de pressão das impressoras conectadas",noPrintersConnected:"Nenhuma impressora conectada",printersConnected:"{{connected}}/{{total}} conectadas",cloudProfiles:"Perfis Cloud",cloudProfilesDescription:"Predefinições de filamento, impressora e processo do Bambu Cloud",appSettings:"Configurações do App",appSettingsDescription:"Configuração do Bambuddy (banco de dados completo)",spoolInventory:"Inventário de bobinas",spoolInventoryDescription:"Bobinas de filamento, histórico de uso e rastreamento de custos",printArchives:"Arquivos de impressão",printArchivesDescription:"Metadados do histórico de impressão (sem arquivos gcode/3MF)",lastBackupAt:"Último backup:",noBackupsYet:"Nenhum backup ainda",next:"Próximo:",startingBackup:"Iniciando backup...",test:"Testar",enableBackup:"Ativar backup",testConnection:"Testar conexão",enterRepoUrl:"Digite a URL do repositório",enterRepoAndToken:"Digite a URL do repositório e o token de acesso",repoRequired:"A URL do repositório é obrigatória",tokenRequired:"O token de acesso é obrigatório",githubBackupEnabled:"Backup GitHub ativado",tokenUpdated:"Token atualizado",settingsSaved:"Configurações salvas",failedToSave:"Falha ao salvar: {{message}}",backupCompleteFiles:"Backup concluído - {{count}} arquivos atualizados",backupSkippedNoChanges:"Backup ignorado - sem alterações",backupFailed2:"Falha no backup: {{message}}",clearedLogs:"{{count}} logs removidos",failedToClearLogs:"Falha ao limpar logs: {{message}}",history:"Histórico",clear:"Limpar",date:"Data",status:"Status",commit:"Commit",localBackup:"Backup local",localBackupDescription:"Crie um backup completo dos seus dados do Bambuddy incluindo banco de dados, arquivos, uploads e todos os ficheiros.",downloadBackupLabel:"Baixar backup",completeBackupZip:"Backup completo: banco de dados + todos os arquivos (ZIP)",download:"Baixar",preparingBackup:"Preparando backup...",creatingArchive:"Criando arquivo de backup... Isso pode demorar para backups grandes.",downloadingFile:"Baixando arquivo de backup...",backupDownloaded:"Backup baixado com sucesso",failedToCreateBackup:"Falha ao criar backup: {{message}}",restore:"Restaurar",restoreReplacesAll:"A restauração substitui todos os dados.",restoreReplacesAllDetail:"Seu banco de dados e arquivos atuais serão completamente substituídos. É necessário reiniciar após a restauração.",restoreConfirmTitle:"Restaurar backup",restoreConfirmMessage:'Tem certeza de que deseja restaurar de "{{filename}}"? Isso substituirá completamente seu banco de dados e todos os arquivos. O aplicativo precisará ser reiniciado após a restauração.',restoreConfirmButton:"Restaurar backup",uploadingFile:"Enviando arquivo de backup...",backupRestoredRestart:"Backup restaurado. Por favor, reinicie o Bambuddy.",failedToRestore:"Falha ao restaurar backup. Verifique o formato do arquivo.",reloadNow:"Recarregar agora",creatingBackup:"Criando backup",restoringBackup:"Restaurando backup",preparing:"Preparando...",processing:"Processando...",doNotClosePage:"Por favor, não feche esta página nem navegue para outro lugar. Esta operação pode levar vários minutos para backups grandes.",restoring:"Restaurando...",restoreComplete:"Restauração concluída",restoreFailed2:"Falha na restauração",importSettings:"Importar configurações de um arquivo de backup",pleaseWaitRestoring:"Aguarde enquanto seus dados estão sendo restaurados",selectBackupFile:"Clique para selecionar um arquivo de backup (.json ou .zip)",duplicateHandling:"Como funciona o tratamento de duplicatas:",matchPrinters:"Impressoras",matchPrintersBy:"correspondência por número de série",matchSmartPlugs:"Tomadas inteligentes",matchSmartPlugsBy:"correspondência por endereço IP",matchNotificationProviders:"Provedores de notificação",matchNotificationProvidersBy:"correspondência por nome",matchFilaments:"Filamentos",matchFilamentsBy:"correspondência por nome + tipo + marca",matchArchives:"Arquivos",matchArchivesBy:"correspondência por hash de conteúdo (sempre ignorado)",matchPendingUploads:"Uploads pendentes",matchPendingUploadsBy:"correspondência por nome do arquivo",matchSettingsTemplates:"Configurações e modelos",matchSettingsTemplatesBy:"sempre sobrescritos",replaceExisting:"Substituir dados existentes",keepExisting:"Manter dados existentes",overwriteDescription:"Sobrescrever itens que já existem com dados do backup",keepDescription:"Restaurar apenas itens que ainda não existem",overwriteCaution:"Cuidado:",overwriteWarning:"A sobrescrita substituirá suas configurações atuais pelos dados do backup. Códigos de acesso das impressoras nunca são sobrescritos por segurança.",cancel:"Cancelar",processingBackup:"Processando arquivo de backup...",itemsRestored:"Itens restaurados",itemsSkipped:"Itens ignorados",restored:"Restaurados",skippedAlreadyExist:"Ignorados (já existem)",filesCategory:"Arquivos (3MF, miniaturas, etc.)",andMore:"...e mais {{count}}",newApiKeysGenerated:"Novas chaves API geradas",keysShownOnce:"Estas chaves são exibidas apenas uma vez. Copie-as agora!",copy:"Copiar",noDataFound:"Nenhum dado para restaurar foi encontrado no arquivo de backup.",close:"Fechar",scheduledBackup:"Backups agendados",scheduledBackupDescription:"Cria automaticamente snapshots de backup conforme agendamento. O diretório de saída pode ser montado em um NAS ou armazenamento externo.",frequency:"Frequência",backupTime:"Tempo",retention:"Retenção",retentionDescription:"Número de backups a manter",outputPath:"Caminho de saída",outputPathPlaceholder:"Padrão: {{path}}",outputPathDescription:"Deixe em branco para o local padrão",runNow:"Executar agora",backupFiles:"Arquivos de backup",noScheduledBackups:"Sem backups ainda",deleteBackup:"Excluir",deleteBackupConfirm:"Excluir este arquivo de backup?",backupRunning:"Backup em andamento...",scheduledBackupComplete:"Backup concluído com sucesso",scheduledBackupFailed:"Falha no backup",nextBackup:"Próximo backup",backupSize:"Tamanho",localTimeHint:"Horário local ({{tz}})",defaultPathLabel:"Padrão:",categories:{settings:"Configurações",notification_providers:"Provedores de notificação",notification_templates:"Modelos de notificação",smart_plugs:"Tomadas inteligentes",printers:"Impressoras",filaments:"Filamentos",maintenance_types:"Tipos de manutenção",archives:"Arquivos",projects:"Projetos",pending_uploads:"Uploads pendentes",external_links:"Links externos",api_keys:"Chaves API"}},tags:{title:"Etiquetas",addTag:"Adicionar Tag",editTag:"Editar Tag",deleteTag:"Excluir Tag",tagName:"Nome da Tag",tagColor:"Cor da Tag",noTags:"Nenhuma tag",deleteConfirm:"Tem certeza de que deseja excluir esta tag?",manageTags:"Gerenciar Tags"},uploadModal:{title:"Upload Arquivos 3MF",dragDrop:"Arraste e solte arquivos .3mf aqui",or:"ou",browseFiles:"Procurar Arquivos",extractionInfo:"O modelo da impressora será extraído automaticamente dos metadados do arquivo 3MF.",uploaded:"enviado",failed:"falhou",uploading:"Enviando...",upload:"Enviar",uploadFailed:"Falha no envio"},editArchive:{title:"Editar Arquivo",name:"Nome",namePlaceholder:"Nome da impressão",printer:"Impressora",noPrinter:"Nenhuma impressora",project:"Projeto",noProject:"Nenhum projeto",itemsPrinted:"Itens Impressos",itemsPrintedHelp:"Número de itens produzidos neste trabalho de impressão",notes:"Notas",notesPlaceholder:"Adicione notas sobre esta impressão...",externalLink:"Link Externo",externalLinkPlaceholder:"https://printables.com/model/...",externalLinkHelp:"Link para Printables, Thingiverse ou outra fonte",tags:"Etiquetas",tagsPlaceholder:"Adicionar tags...",addMoreTags:"Adicionar mais tags...",matchingTags:'Correspondendo "{{query}}"',existingTags:"Tags existentes",clickToAdd:"(clique para adicionar)",status:"Status",failureReason:"Motivo da Falha",selectReason:"Selecione o motivo...",photos:"Fotos do Resultado da Impressão",photosHelp:"Clique em + para adicionar fotos do seu resultado impresso",printResult:"Resultado da Impressão",saving:"Salvando...",failureReasons:{adhesionFailure:"Falha de adesão",spaghettiDetached:"Spaghetti / Destacado",layerShift:"Deslocamento de camada",cloggedNozzle:"Bico entupido",filamentRunout:"Fim do filamento",warping:"Empenamento",stringing:"Fios",underExtrusion:"Subextrusão",powerFailure:"Falha de energia",userCancelled:"Cancelado pelo usuário",other:"Outro"},statuses:{completed:"Concluído",failed:"Falhou",aborted:"Cancelado",printing:"Imprimindo"}},kProfiles:{title:"Perfis K",noPrintersConfigured:"Nenhuma impressora configurada",addPrinterInSettings:"Adicione uma impressora nas Configurações para gerenciar K-profiles",noActivePrinters:"Nenhuma impressora ativa",enablePrinterConnection:"Ative a conexão da impressora para visualizar seus K-profiles",loadingProfiles:"Carregando K-Profiles...",printerOffline:"Impressora Offline",printerOfflineDesc:"A impressora selecionada não está conectada. Ligue-a para visualizar os K-profiles.",noMatchingProfiles:"Nenhum Perfil Correspondente",noMatchingProfilesDesc:"Nenhum perfil corresponde aos seus critérios de pesquisa",noKProfiles:"Nenhum K-Profile",noKProfilesDesc:"Nenhum perfil de avanço de pressão encontrado para bico de {{diameter}}mm",createFirstProfile:"Criar Primeiro Perfil",printer:"Impressora",nozzle:"Bico",refresh:"Atualizar",addProfile:"Adicionar Perfil",export:"Exportar",import:"Importar",select:"Selecionar",selectAll:"Selecionar Todos",delete:"Excluir",searchPlaceholder:"Pesquisar por nome ou filamento...",allExtruders:"Todos os Extrusores",leftOnly:"Apenas Esquerdo",rightOnly:"Apenas Direito",allFlow:"Todo Fluxo",hfOnly:"Apenas HF",sOnly:"Apenas S",sortName:"Ordenar: Nome",sortKValue:"Ordenar: Valor K",sortFilament:"Ordenar: Filamento",leftExtruder:"Extrusor Esquerdo",rightExtruder:"Extrusor Direito",modal:{addTitle:"Adicionar K-Profile",editTitle:"Editar K-Profile",profileName:"Nome do Perfil",profileNamePlaceholder:"Meu Perfil PLA",kValue:"Valor K",kValuePlaceholder:"0.020",kValueHelp:"Faixa típica: 0.01 - 0.06 para PLA, 0.02 - 0.10 para PETG",filament:"Filamento",selectFilament:"Selecionar filamento...",noFilamentsHelp:"Nenhum filamento encontrado. Crie um K-profile no Bambu Studio primeiro.",flowType:"Tipo de Fluxo",highFlow:"Alto Fluxo",standard:"Padrão",nozzleSize:"Tamanho do Bico",extruder:"Extrusor",extruders:"Extrusores",left:"Esquerdo",right:"Direito",notes:"Notas (armazenadas localmente)",notesPlaceholder:"Adicione notas sobre este perfil...",notesHelp:"As notas são salvas no Bambuddy, não na impressora",syncing:"Sincronizando com a impressora...",savingExtruder:"Salvando no extrusor {{current}}/{{total}}...",pleaseWait:"Por favor, aguarde"},deleteConfirm:{title:"Excluir Perfil",cannotUndo:"Isso não pode ser desfeito",message:'Tem certeza de que deseja excluir "{{name}}" da impressora?'},bulkDelete:{title:"Excluir Perfis",cannotUndo:"Isso não pode ser desfeito",message:"Tem certeza de que deseja excluir {{count}} perfis selecionados da impressora?"},toast:{profileSaved:"K-profile salvo",profilesSaved:"K-profile salvo em {{count}} extrusores",selectAtLeastOneExtruder:"Por favor, selecione pelo menos um extrusor",profileDeleted:"K-profile excluído",profilesDeleted:"{{count}} perfis excluídos",exportedProfiles:"{{count}} perfis exportados",importedProfiles:"{{count}} de {{total}} perfis importados",noProfilesToExport:"Nenhum perfil para exportar",invalidFileFormat:"Formato de arquivo inválido",failedToParseImport:"Falha ao analisar o arquivo de importação",failedToSaveBatch:"Falha ao salvar K-profiles",noteSaved:"Nota salva",failedToSaveNote:"Falha ao salvar nota"},permission:{noRead:"Você não tem permissão para atualizar perfis",noCreate:"Você não tem permissão para adicionar perfis",noUpdate:"Você não tem permissão para atualizar K-profiles",noDelete:"Você não tem permissão para excluir K-profiles",noExport:"Você não tem permissão para exportar perfis",noImport:"Você não tem permissão para importar perfis"}},virtualPrinter:{title:"Impressora Virtual",running:"Em execução",stopped:"Parada",description:{default:"Ative uma impressora virtual que aparece no Bambu Studio e no OrcaSlicer. Os arquivos enviados para esta impressora serão arquivados diretamente sem impressão.",proxy:"Ative um proxy que retransmite o tráfego do slicer para uma impressora real, permitindo impressão remota em qualquer rede."},enable:{title:"Ativar Impressora Virtual",visibleInSlicer:'Visível como "Bambuddy" na descoberta do slicer',proxyingTo:"Proxy para {{name}}",notActive:"Não ativo"},model:{title:"Modelo da Impressora",description:"Selecione qual modelo de impressora emular.",restartWarning:"Alterar o modelo reiniciará a impressora virtual"},accessCode:{title:"Código de acesso",isSet:"O código de acesso está definido",notSet:"Nenhum código de acesso definido — necessário para ativar.",placeholder:"Digite um código de 8 caracteres",placeholderChange:"Digite um novo código para alterar",hint:"Deve ter exatamente 8 caracteres. Usado pelos slicers para autenticação.",charCount:"({{count}}/8)"},targetPrinter:{title:"Impressora Alvo",configured:"Proxy alvo configurado",notConfigured:"Nenhuma impressora alvo selecionada - necessário para o modo proxy",placeholder:"Selecione uma impressora...",hint:"Selecione a impressora para a qual o tráfego do slicer será enviado. A impressora deve estar no modo LAN.",noPrinters:"Nenhuma impressora configurada. Adicione uma impressora primeiro para usar o modo proxy."},remoteInterface:{title:"Substituição da Interface de Rede",configured:"Substituição da interface ativa",optional:"Opcional - use se o IP detectado automaticamente estiver errado (por exemplo, várias NICs, Docker, VPN)",placeholder:"Detecção automática (padrão)...",hint:"Substitua o endereço IP anunciado via SSDP e usado no certificado TLS. Útil quando o Bambuddy possui várias interfaces de rede."},mode:{title:"Modo",archive:"Arquivar",archiveDesc:"Arquivar arquivos imediatamente",review:"Revisar",reviewDesc:"Revisar antes de arquivar",queue:"Fila",queueDesc:"Arquivar e adicionar à fila",proxy:"Proxy",proxyDesc:"Retransmitir para impressora real"},autoDispatch:{title:"Envio automático",description:"Iniciar impressões automaticamente quando adicionadas à fila. Quando desativado, as impressões aguardam envio manual."},queueForceColorMatch:{title:"Forçar correspondência de cor",description:"Recusa enviar para uma impressora que não tenha exatamente o tipo e cor de filamento carregados. Desativado por padrão — sem isto, a fila usa apenas correspondência por modelo e pode escolher uma impressora com a cor errada carregada."},tailscaleDisabled:{title:"Integração Tailscale",description:"Ative para marcar este VP como exposto via Tailscale. Mostra o endereço Tailscale do host para você saber qual IP colar no fatiador. A etapa de importação CA é inalterada — este toggle não afeta certificados."},setupRequired:{title:"Configuração Necessária",description:"O recurso de impressora virtual requer configuração adicional do sistema antes de funcionar. Isso inclui encaminhamento de portas, regras de firewall e configurações específicas da plataforma.",readGuide:"Leia o guia de configuração antes de ativar"},howItWorks:{title:"Como funciona",step1:"Complete o guia de configuração para sua plataforma",step2:"Ative a impressora virtual e defina um código de acesso",step3:'No Bambu Studio ou OrcaSlicer, vá para "Adicionar Impressora"'},status:{title:"Detalhes do Status",printerName:"Nome da Impressora",model:"Modelo",serialNumber:"Número de Série",mode:"Modo",pendingFiles:"Arquivos Pendentes",targetPrinter:"Impressora Alvo",ftpPort:"Porta FTP",mqttPort:"Porta MQTT",ftpConnections:"Conexões FTP",mqttConnections:"Conexões MQTT"},toast:{updated:"Configurações da impressora virtual atualizadas",failedToUpdate:"Falha ao atualizar as configurações",copyFailed:"Falha ao copiar — selecione o texto manualmente",accessCodeRequired:"Defina um código de acesso primeiro",targetPrinterRequired:"Selecione uma impressora alvo primeiro",bindIpRequired:"Defina um IP de ligação primeiro",accessCodeEmpty:"O código de acesso não pode estar vazio",accessCodeLength:"O código de acesso deve ter exatamente 8 caracteres",created:"Impressora virtual criada",failedToCreate:"Falha ao criar impressora virtual",deleted:"Impressora virtual excluída",failedToDelete:"Falha ao excluir impressora virtual"},list:{title:"Impressoras Virtuais",add:"Adicionar",addFirst:"Adicionar Impressora Virtual",empty:"Nenhuma impressora virtual configurada. Adicione uma para começar."},bindIp:{title:"Interface de Rede",placeholder:"Selecionar interface...",hint:"Interface de rede para esta impressora virtual. Deve ser única por impressora."},proxy:{accessCodeHint:"No modo proxy, use o código de acesso da impressora alvo no slicer. A conexão é encaminhada de forma transparente para a impressora real."},addDialog:{title:"Adicionar Impressora Virtual",name:"Nome",hint:"Você pode configurar o código de acesso, impressora alvo e outras configurações após a criação.",create:"Criar"},deleteConfirm:{title:"Excluir Impressora Virtual",message:'Tem certeza que deseja excluir "{{name}}"? Isso irá parar todos os serviços desta impressora.'},archiveNameSource:{title:"Origem do nome do arquivo",description:'Escolha como os novos arquivos são nomeados quando chegam pela impressora virtual. "Metadados" usa o título embutido pelo slicer no 3MF (padrão). "Nome do arquivo" usa o nome que o Bambu Studio enviou via FTP — útil se você renomeou o job no diálogo "enviar para impressora".',metadata:"Metadados",filename:"Nome do arquivo"},caCert:{title:"Certificado do slicer",description:"As impressoras virtuais usam um certificado TLS assinado pela CA do Bambuddy. Importe este certificado CA para o armazenamento de confiança do seu slicer uma única vez para que ele aceite a conexão — sem precisar copiá-lo pela linha de comando.",copy:"Copiar",copied:"Copiado",download:"Baixar",fingerprint:"SHA-256"}},modelViewer:{openInSlicer:"Abrir no Slicer",tabs:{model:"Modelo 3D",gcode:"Pré-visualização G-code"},notAvailable:"Não disponível",notSliced:"Não fatiado",plates:"Placas",allPlates:"Todas as Placas",plateNumber:"Placa {{number}}",plateCount:"{{count}} placa",plateCount_other:"{{count}} placas",objectCount:"{{count}} objeto",objectCount_other:"{{count}} objetos",filamentCount:"{{count}} filamento",filamentCount_other:"{{count}} filamentos",eta:"ETA {{minutes}} min",noPreview:"Pré-visualização não disponível para este arquivo",pagination:{pageOf:"Página {{current}} de {{total}}",prev:"Anterior",next:"Próximo"},errors:{failedToLoad:"Falha ao carregar o arquivo",noMeshes:"Nenhuma malha encontrada no arquivo 3MF",unsupportedFormat:"Formato de arquivo não suportado"}},maintenanceDescriptions:{lubricateCarbonRods:"Aplique lubrificante nos eixos de carbono para um movimento suave",lubricateRails:"Aplique lubrificante nos trilhos lineares para um movimento suave",cleanNozzle:"Limpe o hotend e o bico para evitar entupimentos",checkBelts:"Verifique a tensão das correias para impressões precisas",cleanBuildPlate:"Limpe a placa de construção para melhor adesão",checkExtruder:"Verifique as engrenagens do extrusor quanto ao desgaste",checkCooling:"Verifique se os ventiladores de resfriamento estão funcionando corretamente",generalInspection:"Inspeção geral da impressora",cleanCarbonRods:"Limpe os eixos de carbono para reduzir o atrito",lubricateSteelRods:"Aplique lubrificante nas barras de aço para um movimento suave",cleanSteelRods:"Limpe as barras de aço para reduzir o atrito",cleanLinearRails:"Limpe os trilhos lineares para remover poeira e detritos",checkPtfeTube:"Verifique o tubo PTFE quanto ao desgaste ou danos",replaceHepaFilter:"Substitua o filtro HEPA para qualidade do ar",replaceCarbonFilter:"Substitua o filtro de carbono ativado",lubricateLeftNozzleRail:"Lubrifique o trilho do bico esquerdo (série H2)"},smartPlugs:{offline:"Offline",admin:"Administrador",openPlugAdminPage:"Abrir o painel de administração da tomada inteligente",deleteSmartPlug:"Excluir Tomada Inteligente",turnOnSmartPlug:"Ligar Tomada Inteligente",turnOffSmartPlug:"Desligar Tomada Inteligente",turnOn:"Ligar",turnOff:"Desligar",addSmartPlug:{scanningNetwork:"Procurando na rede...",chooseEntity:"Escolha uma entidade...",connectionFailed:"Falha na conexão",searchEntities:"Pesquisar entidades...",searchPowerSensors:"Pesquisar sensores de energia...",searchEnergySensors:"Pesquisar sensores de energia...",placeholders:{plugName:"Tomada da Sala",mqttStateOnValue:"ON, true, 1",mqttSameAsPower:"Mesmo que o tópico de energia, ou diferente"}},linkedTo:"Vinculado a:",monitorOnly:"Apenas monitoramento",alerts:"Alertas",scheduleOn:"Ligar {{time}}",scheduleOff:"Desligar {{time}}",on:"Ligado",off:"Desligado",power:"Potência",kwhToday:"kWh Hoje",settings:"Configurações",automationSettings:"Configurações de automação",showInSwitchbar:"Mostrar na barra de interruptores",quickAccessSidebar:"Acesso rápido pela barra lateral",enabled:"Ativado",enableAutomation:"Ativar automação para este plugue",autoOn:"Auto Ligar",autoOnDescription:"Ligar quando a impressão iniciar",autoOff:"Auto Desligar",autoOffDescription:"Desligar quando a impressão terminar (única vez)",autoOffPersistent:"Manter ativado",autoOffPersistentDescription:"Permanecer ativado entre impressões em vez de única vez",autoOffAfterDrying:"Desligar Após Secagem",autoOffAfterDryingDescription:"Desligar quando a secagem do AMS terminar",delayAfterDryingMinutes:"Atraso após secagem (minutos)",turnOffDelayMode:"Modo de atraso para desligar",time:"Tempo",temp:"Temp.",delayMinutes:"Atraso (minutos)",tempThreshold:"Limite de temperatura (°C)",tempThresholdDescription:"Desliga quando o bico esfria abaixo desta temperatura",edit:"Editar",deleteConfirm:'Tem certeza que deseja excluir "{{name}}"? Esta ação não pode ser desfeita.',turnOnConfirm:'Tem certeza que deseja ligar "{{name}}"?',turnOffConfirm:'Tem certeza que deseja desligar "{{name}}"? Isso cortará a energia do dispositivo conectado.',failedToTurn:'Falha ao {{action}} "{{name}}"',unknown:"Desconhecido",addTitle:"Adicionar plugue inteligente",editTitle:"Editar plugue inteligente",stopScanning:"Parar varredura",discoverTasmota:"Descobrir dispositivos Tasmota",foundDevices:"{{count}} dispositivo(s) encontrado(s) - clique para selecionar:",noDevicesFound:"Nenhum dispositivo Tasmota encontrado na sua rede",haNotConfigured:"Home Assistant não está configurado. Configure em",haSettingsPath:"Configurações → Rede → Home Assistant",selectEntity:"Selecionar entidade *",ipAddress:"Endereço IP *",nameLabel:"Nome *",username:"Usuário",password:"Senha",authHint:"Deixe vazio se seu dispositivo Tasmota não requer autenticação",linkToPrinter:"Vincular à impressora",noPrinter:"Sem impressora (apenas controle manual)",linkingDescription:"A vinculação permite ligar/desligar automaticamente ao iniciar/terminar impressão",powerAlerts:"Alertas de potência",alertAbove:"Alertar se acima (W)",alertBelow:"Alertar se abaixo (W)",alertDescription:"Receba notificações quando o consumo de energia ultrapassar estes limites. Deixe vazio para desativar essa direção.",dailySchedule:"Programação diária",turnOnAt:"Ligar às",turnOffAt:"Desligar às",scheduleDescription:"Ligar/desligar automaticamente o plugue nestes horários diariamente. Deixe vazio para pular essa ação.",showOnPrinterCard:"Mostrar no cartão da impressora",displayOnPrinterCard:"Exibir botão no cartão da impressora",connectedResult:"Conectado!",deviceLabel:"Dispositivo: {{name}} - ",stateLabel:"Estado: {{state}}",test:"Testar",delete:"Excluir",save:"Salvar",add:"Adicionar",cancel:"Cancelar",failedToStartScan:"Falha ao iniciar varredura",nameRequired:"Nome é obrigatório",entityRequired:"Entidade é obrigatória para plugues Home Assistant",mqttTopicRequired:"Pelo menos um tópico MQTT deve ser configurado para potência, energia ou monitoramento de estado",loadingEntities:"Carregando entidades...",loading:"Carregando...",failedToLoadEntities:"Falha ao carregar entidades: {{error}}",noEntitiesMatching:'Nenhuma entidade encontrada correspondente a "{{search}}"',noEntitiesAvailable:"Nenhuma entidade disponível",searchingEntities:"Buscando todas as entidades ({{count}} encontradas)",showingEntities:"Mostrando switch, light, input_boolean ({{count}} disponíveis)",energyMonitoringOptional:"Monitoramento de energia (Opcional)",energyMonitoringHint:"Pesquise e selecione sensores que fornecem dados de potência/energia.",powerSensorW:"Sensor de potência (W)",energyTodayKwh:"Energia hoje (kWh)",totalEnergyKwh:"Energia total (kWh)",noMatchingSensors:"Nenhum sensor correspondente",none:"Nenhum",mqttNotConfigured:"Broker MQTT não configurado. Defina o endereço do broker em",mqttSettingsPath:"Configurações → Rede → Publicação MQTT",mqttNotConfiguredSuffix:"(você não precisa ativar a publicação, apenas preencha os detalhes do broker).",mqttMonitorOnlyDescription:"Plugues MQTT recebem dados de potência/energia via assinatura MQTT. O controle liga/desliga não está disponível - use seu broker MQTT ou sistema de automação residencial.",powerMonitoring:"Monitoramento de potência",energyMonitoring:"Monitoramento de energia",stateMonitoring:"Monitoramento de estado",optional:"opcional",topic:"Tópico",jsonPath:"Caminho JSON",multiplier:"Multiplicador",onValue:"Valor ON",mqttPowerHint:`O caminho JSON extrai o valor do payload JSON (ex: "power_l1"). Deixe vazio se o tópico publica valores numéricos brutos.
+ON 값: "ON"을 의미하는 정확한 문자열. 자동 감지(ON, true, 1)를 위해 비워두세요.`,restControl:"제어",restOnUrl:"켜기 URL",restOffUrl:"끄기 URL",restOnBody:"ON 요청 본문",restOffBody:"OFF 요청 본문",restMethod:"HTTP 방법",restHeaders:"사용자 지정 헤더 (JSON)",restStatusUrl:"상태 URL",restStatusPath:"상태 JSON 경로",restStatusOnValue:"ON 값",restPowerUrl:"전력 URL",restPowerPath:"전력 JSON 경로",restPowerMultiplier:"전력 배수",restEnergyUrl:"에너지 URL",restEnergyPath:"에너지 JSON 경로",restEnergyMultiplier:"에너지 배수",restUrlRequired:"REST 플러그에는 URL(ON 또는 OFF) 중 하나 이상이 필요합니다",restHeadersHint:'예: {"Authorization": "Bearer your-token"}',restBodyHint:'예: ON, {"state": "on"}',restStatusHint:"현재 상태를 폴링할 URL",restPathHint:"예: state 또는 data.power.status",restPowerUrlHint:"전력 데이터의 별도 URL (비어 있으면 상태 URL 사용)",restEnergyUrlHint:"에너지 데이터의 별도 URL (비어 있으면 상태 URL 사용)",restEnergyHint:"각 값은 자체 URL을 사용하거나 상태 URL로 대체할 수 있습니다. 단위 변환에 배수를 사용하세요 (예: Wh→kWh에 0.001).",testConnection:"연결 테스트",connectionSuccess:"연결 성공",noSwitchesInSwitchbar:"스위치바에 스위치 없음",enableSwitchbarHint:'설정 > 스마트 플러그에서 "스위치바에 표시"를 활성화하세요',autoOffAfterDrying:"건조 후 자동 끄기",autoOffAfterDryingDescription:"AMS 건조가 완료되면 끄기",delayAfterDryingMinutes:"건조 후 지연 (분)"},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"이메일",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"SMTP 이메일 알림",telegram:"Telegram 봇을 통한 알림",discord:"Webhook을 통해 Discord 채널로 전송",ntfy:"무료, 자체 호스팅 가능한 푸시 알림",pushover:"간단하고 신뢰할 수 있는 푸시 알림",callmebot:"CallMeBot을 통한 무료 WhatsApp 알림",webhook:"모든 URL에 일반 HTTP POST",homeassistant:"Home Assistant 대시보드의 지속적인 알림"},lastSuccess:"마지막: {{date}}",error:"오류",printer:"프린터:",allPrinters:"모든 프린터",sendTestNotification:"테스트 알림 전송",eventSettings:"이벤트 설정",enabled:"활성화됨",sendFromProvider:"이 제공자에서 알림 전송",printEvents:"인쇄 이벤트",printerStatus:"프린터 상태",amsAlarms:"AMS 알람",amsHtAlarms:"AMS-HT 알람",printQueue:"인쇄 대기열",start:"시작",plateCheck:"플레이트 확인",complete:"완료",failed:"실패",stopped:"중지됨",progress:"진행률",offline:"오프라인",lowFilament:"필라멘트 부족",maintenance:"유지 관리",amsHumidity:"AMS 습도",amsTemp:"AMS 온도",amsHtHumidity:"AMS-HT 습도",amsHtTemp:"AMS-HT 온도",bedCooled:"베드 냉각됨",firstLayer:"첫 번째 레이어",quiet:"방해 금지",digest:"요약 {{time}}",printStarted:"인쇄 시작됨",plateNotEmpty:"플레이트 비어 있지 않음",plateNotEmptyDescription:"인쇄 전 개체 감지됨",printCompleted:"인쇄 완료됨",bedCooledLabel:"베드 냉각됨",bedCooledDescription:"인쇄 후 베드가 임계값 이하로 냉각됨",firstLayerCompleteLabel:"첫 번째 레이어 완료",firstLayerCompleteDescription:"첫 번째 레이어 완료 시 스냅샷과 함께 알림",missingSpoolAssignmentLabel:"스풀 할당 누락",missingSpoolAssignmentDescription:"인쇄 시작 시 필요한 트레이에 할당된 스풀이 없을 때 알림",printFailed:"인쇄 실패",printStopped:"인쇄 중지됨",progressMilestones:"진행률 이정표",progressMilestonesDescription:"25%, 50%, 75%에서 알림",printerOffline:"프린터 오프라인",printerError:"프린터 오류",lowFilamentLabel:"필라멘트 부족",maintenanceDue:"유지 관리 필요",maintenanceDueDescription:"유지 관리가 필요할 때 알림",amsHumidityHigh:"AMS 습도 높음",amsHumidityHighDescription:"일반 AMS 습도가 임계값 초과",amsTemperatureHigh:"AMS 온도 높음",amsTemperatureHighDescription:"일반 AMS 온도가 임계값 초과",amsHtHumidityHigh:"AMS-HT 습도 높음",amsHtHumidityHighDescription:"AMS-HT 습도가 임계값 초과",amsHtTemperatureHigh:"AMS-HT 온도 높음",amsHtTemperatureHighDescription:"AMS-HT 온도가 임계값 초과",inventoryAlerts:"재고 알림",stockReorderAlert:"재주문 알림",stockReorderAlertDescription:"SKU가 재주문 시점에 도달함",stockBreakAlert:"재고 소진 알림",stockBreakAlertDescription:"보충 전에 재고가 소진될 것임",jobAdded:"작업 추가됨",jobAddedDescription:"대기열에 작업 추가됨",jobAssigned:"작업 할당됨",jobAssignedDescription:"모델 기반 작업이 프린터에 할당됨",jobStarted:"작업 시작됨",jobStartedDescription:"대기열 작업 인쇄 시작됨",jobWaiting:"작업 대기 중",jobWaitingDescription:"필라멘트 또는 프린터를 기다리는 작업",jobSkipped:"작업 건너뜀",jobSkippedDescription:"작업 건너뜀 (이전 실패)",jobFailed:"작업 실패",jobFailedDescription:"작업 시작 실패",queueComplete:"대기열 완료",queueCompleteDescription:"모든 대기열 작업 완료",quietHours:"방해 금지 시간",noNotificationsDuring:"이 시간 동안 알림 없음",editProviderToChangeQuietHours:"방해 금지 시간을 변경하려면 제공자를 편집하세요",dailyDigest:"일일 요약",batchNotifications:"알림을 하나의 일일 요약으로 묶기",sendAt:"{{time}}에 전송",editProviderToChangeDigestTime:"요약 시간을 변경하려면 제공자를 편집하세요",edit:"편집",deleteProvider:"알림 제공자 삭제",deleteConfirm:'"{{name}}"을(를) 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.',delete:"삭제",addTitle:"알림 제공자 추가",editTitle:"알림 제공자 편집",nameLabel:"이름 *",namePlaceholder:"내 알림",providerTypeLabel:"제공자 유형 *",configuration:"구성",testConfiguration:"구성 테스트",printerFilter:"프린터 필터",onlyFromPrinter:"이 프린터의 이벤트에 대한 알림만 전송",quietHoursDnd:"방해 금지 시간",quietStart:"시작",quietEnd:"종료",dailyDigestLabel:"일일 요약",sendDigestAt:"요약 전송 시각",digestCollected:"이벤트가 수집되어 이 시간에 하나의 요약으로 전송됩니다",notificationEvents:"알림 이벤트",progressPercent:"(25%, 50%, 75%)",bedCooledAfterPrint:"(인쇄 완료 후)",eventPriority:{sectionTitle:"ntfy 우선순위",helpNtfy:"각 활성화된 이벤트에 대한 우선순위를 선택하세요. ntfy는 이를 사용하여 알림을 에스컬레이션합니다(소리, 가시성, 푸시 동작). 여기서 설정되지 않은 수준은 ntfy 서버 기본값을 사용합니다.",min:"최소",low:"낮음",default:"기본값",high:"높음",urgent:"긴급"},cancel:"취소",save:"저장",add:"추가",nameRequired:"이름이 필요합니다",fieldRequired:"{{field}}이(가) 필요합니다",phoneNumber:"전화번호",apiKey:"API 키",serverUrl:"서버 URL",topic:"토픽",authToken:"인증 토큰",userKey:"사용자 키",appToken:"앱 토큰",priority:"우선순위",botToken:"봇 토큰",chatId:"채팅 ID",smtpServer:"SMTP 서버",smtpPort:"SMTP 포트",security:"보안",authentication:"인증",username:"사용자 이름",password:"비밀번호",fromEmail:"발신 이메일",toEmail:"수신 이메일",webhookUrl:"Webhook URL",payloadFormat:"페이로드 형식",authorization:"인증",titleFieldName:"제목 필드 이름",messageFieldName:"메시지 필드 이름",editTemplate:"템플릿 편집: {{name}}",titleLabel:"제목",bodyLabel:"본문",titlePlaceholder:"알림 제목...",bodyPlaceholder:"알림 본문...",availableVariables:"사용 가능한 변수",clickToInsert:"클릭하여 본문의 커서 위치에 삽입",livePreview:"실시간 미리보기",hide:"숨기기",show:"표시",loadingPreview:"미리보기 불러오는 중...",enterTemplateContent:"미리보기를 보려면 템플릿 내용을 입력하세요",titlePreview:"제목:",bodyPreview:"본문:",resetToDefault:"기본값으로 초기화",titleRequired:"제목이 필요합니다",bodyRequired:"본문이 필요합니다",notificationLog:"알림 로그",showFailedOnly:"실패만",last24Hours:"최근 24시간",last7Days:"최근 7일",last30Days:"최근 30일",last90Days:"최근 90일",justNow:"방금",noFailedNotifications:"실패한 알림 없음",noNotificationsLogged:"기록된 알림 없음",unknownProvider:"알 수 없는 제공자",logTitle:"제목",logMessage:"메시지",logError:"오류",logProvider:"제공자: {{type}}",logTime:"시간: {{time}}",refresh:"새로고침",clearOld:"오래된 것 삭제",statsSummary:"최근 {{days}}일:",statsNotifications:"알림",statsSent:"{{count}}개 전송됨",statsFailed:"{{count}}개 실패",eventTypes:{print_start:"인쇄 시작됨",print_complete:"인쇄 완료",print_failed:"인쇄 실패",print_stopped:"인쇄 중지됨",print_progress:"진행률",printer_offline:"프린터 오프라인",printer_error:"프린터 오류",filament_low:"필라멘트 부족",maintenance_due:"유지 관리 필요",test:"테스트"},userEmail:{title:"알림",emailNotifications:"이메일 알림",emailNotificationsDesc:"내 인쇄 작업에 대한 이메일 알림을 받습니다. 이메일은 고급 인증에서 구성된 시스템 SMTP 설정을 사용하여 전송됩니다.",sendingTo:"알림이 전송될 주소",noEmailWarning:"계정에 이메일 주소가 없습니다. 관리자에게 연락하여 추가하세요.",printJobNotifications:"인쇄 작업 알림",printJobNotificationsDesc:"내가 제출한 인쇄 작업에 대해 이메일 알림을 트리거할 이벤트를 선택하세요.",printJobStarts:"인쇄 작업 시작",printJobStartsDesc:"인쇄 작업이 시작될 때 알림 받기.",printJobFinishes:"인쇄 작업 완료",printJobFinishesDesc:"인쇄 작업이 성공적으로 완료될 때 알림 받기.",printErrors:"인쇄 오류",printErrorsDesc:"인쇄 작업이 실패하거나 오류가 발생할 때 알림 받기.",printJobStops:"인쇄 작업 중지",printJobStopsDesc:"인쇄 작업이 취소되거나 중지될 때 알림 받기.",saveSuccess:"알림 환경 설정이 저장되었습니다.",saveError:"알림 환경 설정 저장 실패."}},richTextEditor:{bold:"굵게",italic:"기울임",underline:"밑줄",bulletList:"글머리 기호 목록",numberedList:"번호 목록",alignLeft:"왼쪽 정렬",alignCenter:"가운데 정렬",alignRight:"오른쪽 정렬",addLink:"링크 추가",removeLink:"링크 제거"},externalLinks:{noLinksConfigured:"구성된 외부 링크 없음",deleteLink:"링크 삭제",removeCustomIcon:"사용자 지정 아이콘 제거",openInNewTab:"새 탭에서 열기",placeholders:{linkName:"내 링크"}},keyboardShortcuts:{title:"키보드 단축키",navigation:"탐색",archivesSection:"아카이브",kProfilesSection:"K-프로필",generalSection:"일반",shortcuts:{goToPrinters:"프린터로 이동",goToArchives:"아카이브로 이동",goToQueue:"대기열로 이동",goToStats:"통계로 이동",goToProfiles:"클라우드 프로필로 이동",goToSettings:"설정으로 이동",focusSearch:"검색 포커스",openUploadModal:"업로드 모달 열기",clearSelection:"선택 초기화 / 입력 포커스 해제",contextMenu:"카드 컨텍스트 메뉴",refreshProfiles:"프로필 새로고침",newProfile:"새 프로필",exitSelectionMode:"선택 모드 종료",showHelp:"이 도움말 표시"},footer:"Esc를 누르거나 외부를 클릭하여 닫기"},notificationLog:{title:"알림 로그",events:{printStarted:"인쇄 시작됨",printComplete:"인쇄 완료",printFailed:"인쇄 실패",printStopped:"인쇄 중지됨",progress:"진행률",printerOffline:"프린터 오프라인",printerError:"프린터 오류",lowFilament:"필라멘트 부족",maintenanceDue:"유지 관리 필요",test:"테스트"},timeAgo:{justNow:"방금",minutesAgo:"{{minutes}}분 전",hoursAgo:"{{hours}}시간 전"}},restoreBackup:{title:"백업 복원",restoring:"복원 중...",restoreComplete:"복원 완료",restoreFailed:"복원 실패",importSettings:"백업 파일에서 설정 가져오기",pleaseWait:"데이터가 복원되는 동안 기다려 주세요",clickToSelect:"백업 파일 클릭하여 선택 (.json 또는 .zip)",howDuplicateHandling:"중복 처리 방법:",categories:{printers:"프린터",smartPlugs:"스마트 플러그",notificationProviders:"알림 제공자",filaments:"필라멘트",archives:"아카이브",pendingUploads:"대기 중인 업로드",settingsTemplates:"설정 및 템플릿"},matchingInfo:{printers:"일련번호로 일치",smartPlugs:"IP 주소로 일치",notificationProviders:"이름으로 일치",filaments:"이름 + 유형 + 브랜드로 일치",archives:"콘텐츠 해시로 일치",pendingUploads:"파일 이름으로 일치",settingsTemplates:"항상 덮어씀"},replaceExisting:"기존 데이터 교체",keepExisting:"기존 데이터 유지",replaceDescription:"백업 데이터로 이미 존재하는 항목 덮어쓰기",keepDescription:"아직 존재하지 않는 항목만 복원",caution:"주의:",cautionText:"덮어쓰기는 현재 구성을 백업 데이터로 교체합니다. 보안상 프린터 액세스 코드는 절대 덮어쓰지 않습니다.",itemsRestored:"복원된 항목",itemsSkipped:"건너뛴 항목",restored:"복원됨",skipped:"건너뜀 (이미 존재)",filesLabel:"파일 (3MF, 썸네일 등)",newApiKeysGenerated:"새 API 키 생성됨",newApiKeysWarning:"이 키는 한 번만 표시됩니다. 지금 복사하세요!",processingBackup:"백업 파일 처리 중...",noDataFound:"백업 파일에서 복원할 데이터를 찾을 수 없습니다.",failedToRestore:"백업 복원 실패. 파일 형식을 확인하세요."},backupExport:{title:"백업 내보내기",selectData:"포함할 데이터 선택",selectAll:"모두 선택",selectNone:"선택 없음",categoryDescriptions:{settings:"언어, 테마, 업데이트 환경 설정",notifications:"ntfy, Pushover, Discord 등",templates:"사용자 지정 메시지 템플릿",smartPlugs:"Tasmota 플러그 구성",externalLinks:"외부 서비스에 대한 사이드바 링크",printers:"프린터 정보 (액세스 코드 제외)",plateDetection:"빈 플레이트 기준 이미지",filaments:"필라멘트 유형 및 비용",maintenance:"사용자 지정 유지 관리 일정",archives:"모든 인쇄 데이터 + 파일 (3MF, 썸네일, 사진)",projects:"프로젝트, BOM 항목 및 첨부 파일",pendingUploads:"검토 대기 중인 가상 프린터 업로드",apiKeys:"Webhook API 키 (가져오기 시 새 키 생성)"},requiresPrinters:"프린터 선택 필요",zipFileWarning:"ZIP 파일이 생성됩니다.",zipFileDescription:"모든 3MF 파일, 썸네일, 타임랩스 및 사진을 포함합니다. 시간이 걸리고 파일이 커질 수 있습니다.",includeAccessCodes:"액세스 코드 포함",includeAccessCodesDescription:"다른 기기로 전송하는 경우",includeAccessCodesWarning:"액세스 코드가 평문으로 포함됩니다. 이 백업 파일을 안전하게 보관하세요!",categoriesSelected:"{{selectedCount}}개 카테고리 선택됨"},pendingUploads:{placeholders:{notes:"이 인쇄에 대한 메모 추가..."},discardUpload:"업로드 삭제",archiveAllUploads:"모든 업로드 아카이브",discardAllUploads:"모든 업로드 삭제",archive:"아카이브",timeAgo:{justNow:"방금",minutesAgo:"{{minutes}}분 전",hoursAgo:"{{hours}}시간 전",daysAgo:"{{days}}일 전"}},apiBrowser:{placeholders:{requestBody:"JSON 요청 본문...",searchEndpoints:"엔드포인트 검색..."}},configureAmsSlot:{title:"AMS 슬롯 구성",slotConfigured:"슬롯 구성됨!",configuringSlot:"슬롯 구성 중:",slotLabel:"{{ams}} 슬롯 {{slot}}",searchPresets:"프리셋 검색...",colorPlaceholder:"색상 이름 또는 16진수 (예: brown, FF8800)",clearCustomColor:"사용자 지정 색상 초기화",noCloudPresets:"클라우드 프리셋 없음. Bambu 클라우드에 로그인하여 동기화하세요.",noPresetsAvailable:"사용 가능한 프리셋 없음. Bambu 클라우드에 로그인하거나 로컬 프로필을 가져오세요.",noMatchingPresets:"일치하는 프리셋을 찾을 수 없습니다.",custom:"사용자 지정",builtin:"기본 제공",settingsSentToPrinter:"설정이 프린터로 전송됨",filamentProfile:"필라멘트 프로필",kProfileLabel:"K 프로필 (압력 전진)",filteringFor:"필터링 중: {{material}}",noKProfile:"K 프로필 없음 (기본값 0.020 사용)",noMatchingKProfiles:"일치하는 K 프로필을 찾을 수 없습니다. 기본값 K=0.020이 사용됩니다.",selectFilamentFirst:"먼저 필라멘트 프로필을 선택하세요",kFromCalibration:"K={{value}} (프린터 보정에서)",customColorLabel:"사용자 지정 색상 (선택사항)",presetColors:"{{name}} 색상:",showLessColors:"색상 간략히 보기",showMoreColors:"더 많은 색상 보기",clear:"초기화",hexLabel:"16진수: #{{hex}}",resetting:"초기화 중...",resetSlot:"슬롯 초기화",cancel:"취소",configuring:"구성 중...",configureSlot:"슬롯 구성"},githubBackup:{title:"Git 백업",history:"기록",downloadBackup:"백업 다운로드",restoreBackup:"백업 복원",noBackupsYet:"아직 백업 없음"},emailSettings:{placeholders:{fromName:"Bambuddy"}},tagManagement:{searchTags:"태그 검색...",renameTag:"태그 이름 바꾸기",deleteTag:"태그 삭제"},notificationTemplates:{placeholders:{title:"알림 제목...",body:"알림 본문..."}},batchTag:{placeholders:{newTag:"새 태그 입력..."}},photoGallery:{deletePhoto:"사진 삭제"},filamentHoverCard:{copySpoolUuid:"스풀 UUID 복사"},kProfilesView:{hasNote:"메모 있음",copyProfile:"프로필 복사"},layout:{openMenu:"메뉴 열기",noPermissionSystemInfo:"시스템 정보를 볼 권한이 없습니다"},dashboard:{dragToReorder:"드래그하여 순서 변경",hideWidget:"위젯 숨기기"},notificationProviderCard:{deleteNotificationProvider:"알림 제공자 삭제"},fileManagerModal:{closeFileManager:"파일 관리자 닫기",sortFiles:"파일 정렬",goToParentFolder:"상위 폴더로 이동",threeView:"3D 보기"},embeddedCameraViewer:{refreshStream:"스트림 새로고침",close:"닫기",zoomOut:"축소",resetZoom:"배율 초기화",zoomIn:"확대",dragToResize:"드래그하여 크기 조정"},timelapseViewer:{skipBack5s:"5초 뒤로",skipForward5s:"5초 앞으로"},notificationProviders:{descriptions:{email:"SMTP 이메일 알림",telegram:"Telegram 봇을 통한 알림",discord:"Webhook을 통해 Discord 채널로 전송",ntfy:"무료, 자체 호스팅 가능한 푸시 알림",pushover:"간단하고 신뢰할 수 있는 푸시 알림",callmebot:"CallMeBot을 통한 무료 WhatsApp 알림",webhook:"모든 URL에 일반 HTTP POST"}},logViewer:{searchPlaceholder:"메시지 또는 로거 이름 검색...",noLogEntries:"로그 항목을 찾을 수 없음"},switchbarPopover:{noSwitchesInSwitchbar:"스위치바에 스위치 없음"},projectPageModal:{placeholders:{title:"제목",designer:"디자이너",license:"라이선스",description:"설명 입력...",profileTitle:"프로필 제목",profileDescription:"프로필 설명..."}},SpoolmanSettings:{},time:{unknown:"-",waiting:"대기 중",justNow:"방금",now:"지금",minsAgo:"{{count}}분 전",inMins:"{{count}}분 후",hoursAgo:"{{count}}시간 전",inHours:"{{count}}시간 후",daysAgo:"{{count}}일 전",inDays:"{{count}}일 후"},spoolbuddy:{nav:{dashboard:"대시보드",ams:"AMS",inventory:"재고",writeTag:"태그 쓰기",settings:"설정"},status:{nfcReady:"NFC 준비됨",nfcOff:"NFC 꺼짐",offline:"오프라인",online:"온라인",noPrinters:"프린터 없음",deviceOffline:"장치 오프라인",waitingConnection:"장치 연결 대기 중...",systemReady:"시스템 준비됨",status:"상태"},dashboard:{readyToScan:"스캔 준비됨",idleMessage:"스풀을 저울에 올려 식별하세요",nfcHint:"NFC 태그가 자동으로 읽힙니다",device:"장치",syncWeight:"무게 동기화",weightSynced:"동기화됨!",unknownTag:"알 수 없는 태그",newTag:"새 태그 감지됨",onScale:"저울 위",linkSpool:"스풀에 연결",linkTagTitle:"태그를 스풀에 연결",linkTag:"태그 연결",selectSpool:"이 태그를 연결할 스풀 선택:",noUntagged:"태그 없는 스풀을 찾을 수 없음",tagDetected:"태그 감지됨",noTag:"태그 없음",tagId:"태그",grossWeight:"총 무게",spoolSize:"스풀 크기",close:"닫기",currentSpool:"현재 스풀",plateReady:"플레이트 준비됨: {{name}}",plateReadyLabel:"초기화할 플레이트",plateClearAction:"초기화",plateClearedToast:"플레이트가 초기화됨으로 표시됨",plateClearFailed:"플레이트를 초기화됨으로 표시할 수 없음"},modal:{spoolDetected:"스풀 감지됨",assignToAms:"AMS에 할당",syncWeight:"무게 동기화",weightSynced:"동기화됨!",syncing:"동기화 중...",newTagDetected:"새 태그 감지됨",addToInventory:"재고에 추가",assignToAmsTitle:"AMS에 할당",selectSlot:"슬롯 선택",assign:"할당",assigning:"할당 중...",assignSuccess:"할당됨!",assignPendingInsert:"할당됨. 스풀을 삽입하면 슬롯이 구성됩니다.",assignError:"스풀 할당 실패. 다시 시도하세요.",noPrinterSelected:"프린터 선택...",noAmsDetected:"이 프린터에서 AMS가 감지되지 않음",slot:"슬롯"},weight:{noReading:"읽기 없음",stable:"안정됨",measuring:"측정 중...",tare:"영점 조정",calibrate:"보정"},spool:{remaining:"남은 양",material:"재료",brand:"브랜드",color:"색상",coreWeight:"코어",labelWeight:"라벨",scaleWeight:"저울",netWeight:"순 무게",lastUsed:"마지막 사용"},ams:{noData:"AMS가 감지되지 않음",connectAms:"필라멘트 슬롯을 보려면 AMS를 연결하세요",noPrinter:"선택된 프린터 없음",selectPrinter:"상단 표시줄에서 프린터를 선택하세요",printerDisconnected:"프린터 연결 끊김",humidity:"습도",level:"레벨",active:"활성",slot:"슬롯",empty:"비어 있음"},inventory:{search:"스풀 검색...",empty:"재고에 스풀 없음",noResults:"일치하는 스풀 없음",spools:"스풀",addSpool:"스풀 추가"},settings:{tabDevice:"장치",tabDisplay:"화면",tabScale:"저울",tabUpdates:"업데이트",nfcReader:"NFC 리더",type:"유형",connection:"연결",notConnected:"N/A",deviceInfo:"장치 정보",hostname:"호스트",uptime:"가동 시간",systemConfig:"백엔드 및 인증",backendUrl:"Bambuddy 백엔드 URL",apiToken:"API 토큰",apiTokenPlaceholder:"API 토큰 입력",saveConfig:"구성 저장",systemQueued:"구성 대기 중.",nfcDiagnostic:"NFC 진단",scaleDiagnostic:"저울 진단",readTagDiagnostic:"태그 읽기 진단",testNfc:"리더 테스트",testScale:"정확도 테스트",testReadTag:"태그 읽기",systemFieldsRequired:"백엔드 URL이 필요합니다.",brightness:"밝기",saved:"저장됨",noBacklight:"DSI 백라이트가 감지되지 않음. 밝기 제어는 DSI 디스플레이가 필요합니다.",screenBlank:"화면 꺼짐 대기 시간",screenBlankDesc:"비활성 후 화면이 꺼집니다. 터치하여 깨우세요.",displayNote:"밝기는 소프트웨어 필터로 적용됩니다.",scaleCalibration:"저울 보정",currentWeight:"현재 무게",tareOffset:"영점",calFactor:"계수",knownWeight:"알려진 무게",calStep1:"저울에서 모든 물건을 제거하고 영점 설정을 누르세요.",calStep2:"저울에 알려진 무게를 올리세요.",setZero:"영점 설정",calibrateNow:"보정",calibrated:"보정됨",tareSet:"영점 조정 명령 전송됨. 장치 대기 중...",tareComplete:"영점 조정 완료!",tareTimedOut:"영점 조정 시간 초과 — SpoolBuddy 데몬이 실행 중인가요?",tareFailed:"영점 조정 명령 전송 실패",zeroSet:"영점이 설정됨. 저울에 알려진 무게를 올리세요.",calibrationDone:"보정 완료!",calibrationFailed:"보정 실패",lastCalibrated:"마지막 보정",stable:"안정됨",settling:"안정화 중...",firmware:"펌웨어",scale:"저울",noDevice:"SpoolBuddy 장치를 찾을 수 없음",daemonVersion:"데몬 버전",currentVersion:"현재",versionPending:"데몬 대기 중...",checking:"확인 중...",checkUpdates:"업데이트 확인",updateAvailable:"업데이트 사용 가능",updateInstructions:"SSH를 통해 업데이트: SpoolBuddy 설치 스크립트를 실행하여 업그레이드하세요.",upToDate:"최신 버전",includeBeta:"베타 버전 포함"},writeTag:{tabExisting:"기존 스풀",tabNew:"새 스풀",tabReplace:"태그 교체",searchPlaceholder:"재료, 색상, 브랜드로 검색...",noUntaggedSpools:"태그 없는 스풀 없음",noTaggedSpools:"태그 있는 스풀 없음",selectSpool:"스풀을 선택한 후 빈 NTAG를 리더에 올려놓으세요",placeTag:"NTAG를 리더에 올려놓으세요",tagReady:"태그 감지됨 — 쓰기 준비됨",writeTag:"태그 쓰기",replaceTag:"태그 교체",writing:"태그 쓰는 중...",waiting:"SpoolBuddy 대기 중...",writeSuccess:"태그 성공적으로 쓰여짐!",writeFailed:"쓰기 실패",queueFailed:"쓰기 명령 대기 실패",tryAgain:"다시 시도",cancel:"취소",replaceWarning:"이전 태그가 연결 해제됩니다. 새 태그가 교체합니다.",deviceOffline:"SpoolBuddy가 오프라인입니다",material:"재료",colorName:"색상 이름",color:"색상",brand:"브랜드",weight:"무게 (g)",createSpool:"스풀 생성",creating:"생성 중...",spoolCreated:"스풀 생성됨! 쓰기 준비됨.",createFailed:"스풀 생성 실패",incompleteDataWarning:"불완전한 Spoolman 데이터로 태그 쓰여짐"},quickMenu:{printerPower:"프린터 전원",systemControls:"시스템",restartDaemon:"데몬 재시작",restartBrowser:"브라우저 재시작",reboot:"재부팅",shutdown:"종료",swipeToClose:"아래로 스와이프하여 닫기",confirmTitle:"확인",confirmShutdown:"SpoolBuddy를 종료하시겠습니까? 다시 켜려면 물리적 접근이 필요합니다.",confirmReboot:"SpoolBuddy를 재부팅하시겠습니까?",confirmRestartDaemon:"SpoolBuddy 데몬을 재시작하시겠습니까? NFC와 저울이 일시적으로 사용 불가능합니다.",confirmRestartBrowser:"키오스크 브라우저를 재시작하시겠습니까? 화면이 잠시 꺼집니다.",confirm:"확인",confirmPlugOn:"{{name}}을(를) 켜시겠습니까?",confirmPlugOff:"{{name}}을(를) 끄시겠습니까?",turnOn:"켜기",turnOff:"끄기"}},bugReport:{title:"버그 신고",description:"설명",descriptionPlaceholder:"무엇이 잘못되었나요? 문제를 설명해 주세요...",email:"이메일 (선택사항)",emailPlaceholder:"your@email.com",emailPrivacy:"제공하면 이메일이 GitHub 이슈의 접힌 섹션에 포함되어 관리자가 후속 조치를 취할 수 있습니다.",screenshot:"스크린샷",uploadOrPaste:"이미지 업로드, 붙여넣기 또는 드래그",dataCollectedSummary:"보고서에 포함되는 데이터는?",dataIncluded:"포함됨:",dataIncludedList:"앱 버전, OS, 아키텍처, Python 버전, 데이터베이스 통계(개수만), 프린터 모델, 노즐 개수, 펌웨어 버전, 연결 상태, 통합 상태(Spoolman, MQTT, HA), 비민감 설정, 네트워크 인터페이스 수, Docker 세부 정보, 의존성 버전.",dataNeverIncluded:"절대 포함되지 않음:",dataNeverIncludedList:"프린터 이름, 일련 번호, 액세스 코드, 비밀번호, IP 주소, 이메일 주소, API 키, 토큰, Webhook URL, 호스트 이름 또는 사용자 이름.",submit:"제출",startLogging:"디버그 로깅 시작",stepEnableLogging:"디버그 로깅 활성화됨",stepReproduce:"이제 문제를 재현하세요",stepStopLogging:"중지 후 보고서 제출",stopAndSubmit:"중지 후 제출",maxDuration:"{{minutes}}분 후 자동 중지",stoppingLogs:"로그 수집 및 제출 중...",submitting:"버그 보고서 제출 중...",submitSuccess:"버그 보고서가 성공적으로 제출되었습니다!",submitFailed:"버그 보고서 제출 실패",thankYou:"감사합니다!",submitted:"버그 보고서가 제출되었습니다.",viewIssue:"이슈 보기",unexpectedError:"예상치 못한 오류가 발생했습니다",submittingStepConnection:"프린터 연결 확인 실행 중",submittingStepVirtualPrinters:"가상 프린터 설정 확인 실행 중",submittingStepLogScan:"알려진 문제가 있는지 최근 로그 스캔 중",submittingStepSubmit:"GitHub에 보고서 제출 중",diagnosticChecking:"프린터 연결 확인 중...",diagnosticHealthy:"연결 확인 통과 — 프린터에서 문제가 발견되지 않았습니다.",diagnosticSummary:"{{total}}개 프린터 중 {{problems}}개에서 연결 문제가 있습니다",diagnosticIntro:"하나 이상의 프린터에 연결 문제가 있어 현재 문제의 원인일 수 있습니다. 아래에서 프린터를 펼쳐 수정 방법을 확인하세요 — 해결하면 버그 보고서 없이 문제가 해결될 수 있습니다. 아래에서 보고서를 제출할 수도 있습니다.",logHealthSummary:"로그에서 알려진 문제가 발견되었습니다",logHealthIntro:"최근 로그가 알려진 문제와 일치합니다. 아래 수정 방법을 확인하세요 — 해결하면 버그 보고서 없이 문제가 해결될 수 있습니다. 아래에서 보고서를 제출할 수도 있습니다."},failureDetection:{title:"AI 실패 감지",description:"자체 호스팅 Obico ML API로 인쇄를 모니터링하고 감지된 실패에 자동으로 조치합니다.",mlUrl:"Obico ML API URL",mlUrlHint:"자체 호스팅 Obico ml_api 컨테이너의 기본 URL (예: http://192.168.1.10:3333).",test:"테스트",testSuccess:"ML API에 도달 가능하며 정상입니다.",testFailed:"ML API에 도달할 수 없습니다.",sensitivity:"민감도",sensitivityLow:"낮음 (오탐 적음)",sensitivityMedium:"중간 (균형)",sensitivityHigh:"높음 (조기 감지, 오탐 많음)",sensitivityHint:"경고 및 실패를 트리거하는 신뢰도 임계값을 조정합니다.",action:"감지된 실패에 대한 조치",actionNotify:"알림만",actionPause:"인쇄 일시 중지",actionPauseOff:"일시 중지 후 전원 끄기",pollInterval:"폴링 간격 (초)",pollIntervalHint:"인쇄 중 각 프린터를 확인하는 빈도. 최소 5초, 최대 120초.",externalUrlMissing:"외부 URL이 설정되지 않았습니다.",externalUrlHint:"ML API가 URL을 통해 카메라 스냅샷을 가져옵니다. ML API 컨테이너가 Bambuddy에 도달할 수 있도록 일반 설정에서 외부 URL을 설정하세요.",perPrinterTitle:"모니터링되는 프린터",perPrinterHint:"감지 서비스가 감시할 프린터를 선택하세요.",monitorAll:"연결된 모든 프린터 모니터링",statusTitle:"상태",serviceRunning:"서비스 실행 중",thresholds:"낮음 / 높음 임계값",activePrinters:"활성 인쇄물",noActivePrints:"현재 실행 중인 인쇄물 없음.",historyTitle:"최근 감지",noHistory:"아직 감지 없음."},makerworld:{title:"MakerWorld",description:"MakerWorld 모델 URL을 붙여넣어 Bambu Handy 앱을 떠나지 않고 Bambuddy에서 직접 가져오고 인쇄하세요.",pasteUrlHeader:"MakerWorld에서 가져오기",pasteUrlPlaceholder:"https://makerworld.com/en/models/… 또는 MakerWorld 링크 붙여넣기",resolveButton:"확인",signInRequiredTitle:"다운로드하려면 Bambu 클라우드 로그인 필요",signInRequiredBody:"익명으로 모델 세부 정보를 탐색할 수 있지만 MakerWorld는 3MF 파일을 다운로드하려면 Bambu 클라우드 계정이 필요합니다.",openCloudSettings:"클라우드 설정 열기",untitledModel:"제목 없는 모델",byCreator:"{{name}} 제작",downloadsCount:"{{count}}회 다운로드",licensePrefix:"라이선스",alreadyImported:"이미 라이브러리에 있음",openOnMakerworld:"MakerWorld에서 열기",alreadyInLibrary:"이 모델이 이미 라이브러리에 있습니다 — 파일 관리자 → MakerWorld에서 찾으세요",importSuccess:"{{filename}} 가져옴 — 파일 관리자 → MakerWorld에 저장됨",platesHeader:"플레이트 ({{count}})",plateDefaultName:"플레이트 {{n}}",materialCount:"{{count}}개 필라멘트",amsRequired:"AMS 필요",slicedFor:"{{printer}}용으로 슬라이싱됨",alsoCompatible:"호환 가능으로도 표시됨: {{printers}}",importToLibrary:"저장",sliceIn:"{{slicer}}에서 저장 및 슬라이싱",disclaimer:"MakerWorld 통합은 커뮤니티가 문서화한 API 엔드포인트를 사용합니다. Bambuddy는 MakerWorld 또는 Bambu Lab과 제휴하거나 이들의 승인을 받지 않았습니다.",lastImportSuccess:"라이브러리에 가져옴",lastImportAlreadyInLibrary:"이미 라이브러리에 있음",viewInLibrary:"파일 관리자에서 보기",openInBambuStudio:"Bambu Studio에서 열기",openInOrcaSlicer:"OrcaSlicer에서 열기",importTo:"파일 관리자로 가져오기",recentImportsHeader:"최근 가져오기",phaseResolving:"확인 중",phaseDownloading:"다운로드 중",folderAuto:"MakerWorld (기본값)",importAll:"모두 가져오기",importAllProgress:"{{total}}개 중 {{current}}개 가져오는 중",openGallery:"이미지 갤러리 열기",galleryPrev:"이전 이미지",galleryNext:"다음 이미지",deleteImport:"라이브러리에서 제거",importDeleting:"제거 중…",importDeleted:"라이브러리에서 제거됨",confirmDelete:"라이브러리에서 {{filename}}을(를) 제거하시겠습니까? 로컬 파일이 삭제되지만 MakerWorld에서 다시 가져올 수 있습니다.",errors:{resolveFailed:"MakerWorld URL을 확인할 수 없습니다.",downloadFailed:"다운로드 실패. 다시 시도하세요.",deleteFailed:"라이브러리에서 파일을 제거할 수 없습니다."}},gcodeViewer:{back:"뒤로",backToArchives:"인쇄 아카이브로 돌아가기",backToFiles:"파일 관리자로 돌아가기"},libraryTrash:{title:"휴지통",headerButton:"휴지통",headerTooltip:"휴지통으로 이동된 파일 보기",backToFiles:"파일 관리자로 돌아가기",subtitleAdmin:"삭제된 파일은 {{days}}일 동안 여기에 보관된 후 자동 삭제됩니다. 이 보기는 모든 사용자의 휴지통 파일을 표시합니다.",subtitleUser:"삭제된 파일은 {{days}}일 동안 여기에 보관된 후 자동 삭제됩니다.",loading:"휴지통 불러오는 중…",loadError:"휴지통을 불러올 수 없습니다.",empty:"휴지통이 비어 있습니다.",summary:"{{count}}개 파일 · {{size}}",emptyTrash:"휴지통 비우기",restore:"복원",purgeNow:"지금 삭제",autoPurgeIn:"{{when}} 후 자동 삭제",days:"일",retentionLabel:"자동 삭제 기간",selectAll:"모두 선택",selectOne:"{{filename}} 선택",selectionCount:"{{count}}개 선택됨",bulkRestore:"선택 항목 복원",bulkPurge:"선택 항목 삭제",col:{filename:"파일",folder:"폴더",size:"크기",deleted:"휴지통 이동일",autoPurge:"자동 삭제일",owner:"소유자",actions:"작업"},confirm:{purgeTitle:"영구 삭제?",purgeBody:"{{filename}}이(가) 디스크에서 삭제되며 복원할 수 없습니다.",emptyTitle:"휴지통을 비우시겠습니까?",emptyBody:"{{count}}개의 모든 파일이 디스크에서 삭제됩니다. 이 작업은 취소할 수 없습니다.",bulkPurgeTitle:"선택한 파일을 영구 삭제하시겠습니까?",bulkPurgeBody:"선택한 {{count}}개 파일이 디스크에서 삭제되며 복원할 수 없습니다.",cta:"영구 삭제"},toast:{restored:"파일이 복원되었습니다.",restoreFailed:"파일을 복원할 수 없습니다.",purged:"파일이 영구 삭제되었습니다.",purgeFailed:"파일을 삭제할 수 없습니다.",emptied:"휴지통에서 {{count}}개 파일이 삭제되었습니다.",emptyFailed:"휴지통을 비울 수 없습니다.",retentionSaved:"자동 삭제가 {{days}}일로 설정되었습니다.",retentionFailed:"보존 설정을 저장할 수 없습니다.",bulkRestored:"{{count}}개 파일이 복원되었습니다.",bulkPurged:"{{count}}개 파일이 삭제되었습니다."}},libraryPurge:{title:"오래된 파일 삭제",headerButton:"오래된 파일 삭제",headerTooltip:"오래된 파일을 휴지통으로 일괄 이동",description:"라이브러리에서 오래된 파일을 한 번에 정리합니다. 인쇄 기록이 있는 파일은 마지막 인쇄 날짜 기준으로, 한 번도 인쇄되지 않은 파일은 업로드 날짜 기준으로 계산됩니다.",ageLabel:"다음보다 오래된 파일 이동",days:"일",includeNeverPrinted:"한 번도 인쇄되지 않은 파일 포함",effectsTitle:"삭제 클릭 시 일어나는 일",effect1:"일치하는 파일이 휴지통으로 이동됩니다 — 디스크에서 아직 삭제되지 않습니다.",effect2:"보존 기간이 만료되기 전까지 언제든 휴지통에서 복원할 수 있습니다.",effect3:"보존 기간 후 휴지통 청소기가 디스크에서 영구적으로 제거합니다.",effect4:"외부(연결된) 폴더의 파일은 건너뜁니다 — Bambuddy는 자신이 소유하지 않은 바이트는 절대 삭제하지 않습니다.",previewLoading:"일치하는 파일 수 확인 중…",previewFailed:"삭제 미리보기를 불러올 수 없습니다.",previewSummary:"{{count}}개 파일 · {{size}}이(가) 휴지통으로 이동됩니다",andMore:"…및 {{count}}개 더",warning:"휴지통 파일은 보존 기간이 만료될 때까지 저장 공간을 차지합니다. 즉시 디스크를 확보하려면 나중에 휴지통을 비우세요.",confirmCta:"{{count}}개를 휴지통으로 이동",purging:"휴지통으로 이동 중…",toast:{success:"{{count}}개 파일을 휴지통으로 이동했습니다.",failed:"파일을 삭제할 수 없습니다."}},libraryAutoPurge:{enableLabel:"오래된 파일 자동 삭제",enableDescription:"매일 한 번 관리자 삭제를 실행합니다. 파일이 먼저 휴지통으로 이동됩니다 — 즉시 삭제되지 않습니다.",ageLabel:"다음보다 오래된 파일 자동 삭제",ageDescription:"최소 7일, 최대 10년. 수동 삭제 버튼과 같은 날짜 규칙을 사용합니다.",days:"일",includeNeverPrinted:"한 번도 인쇄되지 않은 파일 포함",saveFailed:"자동 삭제 설정을 저장할 수 없습니다."},archivePurge:{headerButton:"오래된 것 삭제",headerTooltip:"오래된 아카이브 일괄 삭제",title:"오래된 아카이브 삭제",description:"오래된 인쇄 기록을 정리합니다. 각 아카이브는 가장 최근 인쇄 완료 시점 기준으로 계산됩니다 — 아카이브를 다시 인쇄하면 날짜가 새로고침되므로 활성 작업은 절대 삭제되지 않습니다.",ageLabel:"다음 기간 동안 인쇄되지 않은 아카이브 삭제",days:"일",effectsTitle:"삭제 클릭 시 일어나는 일",effect1:"일치하는 각 아카이브가 데이터베이스에서 영구적으로 제거됩니다.",effect2:"3MF, 썸네일, 타임랩스, 소스 3MF, F3D 디자인 파일 및 사진 폴더가 모두 디스크에서 삭제됩니다.",effect3:"아카이브에 대한 휴지통이 없습니다 — 삭제는 즉각적이며 취소할 수 없습니다.",effect4:"아카이브를 다시 인쇄하면 날짜 카운터가 초기화되므로 여전히 사용하는 아카이브는 안전합니다.",previewLoading:"일치하는 아카이브 수 확인 중…",previewFailed:"삭제 미리보기를 불러올 수 없습니다.",previewSummary:"{{count}}개 아카이브 · {{size}}이(가) 삭제됩니다",andMore:"…및 {{count}}개 더",warning:"영구적입니다. 계속하기 전에 보관하고 싶은 것을 다운로드하거나 즐겨찾기에 추가하세요.",confirmCta:"{{count}}개 아카이브 삭제",purging:"삭제 중…",toast:{success:"{{count}}개 아카이브가 삭제되었습니다.",failed:"아카이브를 삭제할 수 없습니다."},purgeStatsLabel:"통계에서도 제거",purgeStatsHint:"일치하는 아카이브를 빠른 통계(필라멘트, 시간, 비용, 에너지)에서 삭제합니다. 이 옵션 없이는 빠른 통계는 모든 기여를 유지하고 파일만 디스크에서 제거됩니다."},archiveAutoPurge:{enableLabel:"오래된 아카이브 자동 삭제",enableDescription:"매일 한 번, 임계값 내에 인쇄되지 않은 아카이브를 영구적으로 삭제합니다. 아카이브를 다시 인쇄하면 카운터가 초기화됩니다. 휴지통 없음 — 삭제는 즉각적입니다.",ageLabel:"다음 기간 동안 인쇄되지 않은 아카이브 자동 삭제",ageDescription:"최소 7일, 최대 10년. 가장 최근 인쇄 완료 시점 기준 — 아카이브를 다시 인쇄하면 날짜가 새로고침됩니다. 아카이브, 3MF, 썸네일, 타임랩스 및 사진을 삭제합니다.",days:"일",runNow:"지금 아카이브 삭제",saveFailed:"자동 삭제 설정을 저장할 수 없습니다.",purgeStatsLabel:"통계에서도 제거",purgeStatsDescription:"활성화되면 일일 정리 작업도 각 삭제된 아카이브를 빠른 통계(필라멘트, 시간, 비용, 에너지)에서 제거합니다. 기본값 비활성화 — 빠른 통계는 기여를 유지하고 파일만 디스크에서 제거됩니다."},cameraTokens:{title:"카메라 API 토큰",navTitle:"카메라 API 토큰",description:"Home Assistant, Frigate, 키오스크 또는 안정적인 URL이 필요한 다른 도구에 카메라 스트림을 내장하기 위한 장기 토큰. 각 토큰은 카메라 스트림 전용이며 언제든지 취소할 수 있습니다.",loading:"불러오는 중…",confirmRevoke:{title:"이 토큰을 취소하시겠습니까?",body:'"{{name}}"을(를) 사용하는 모든 장치가 즉시 접근을 잃습니다. 이 작업은 취소할 수 없습니다.',cancel:"취소",confirm:"취소"},create:{title:"새 토큰 만들기",nameLabel:"토큰 이름",namePlaceholder:"예: Home Assistant",daysLabel:"만료까지 일 수",submit:"만들기",hint:"최대 수명은 365일입니다. 토큰 값은 생성 시 한 번만 표시됩니다 — 지금 복사하세요."},created:{title:"토큰 생성됨 — 지금 복사하세요",warning:"이 토큰은 이 번만 볼 수 있습니다. 이 대화상자를 닫으면 다시는 볼 수 없습니다.",copy:"복사",dismiss:"저장했습니다"},list:{myTitle:"내 토큰",allTitle:"모든 사용자 (관리자 보기)",empty:"아직 토큰 없음.",name:"이름",owner:"소유자",prefix:"접두사",created:"생성일",expires:"만료일",lastUsed:"마지막 사용",revoke:"취소",expired:"만료됨"},toast:{created:"토큰 생성됨",createFailed:"토큰 생성 실패",revoked:"토큰 취소됨",revokeFailed:"토큰 취소 실패",loadFailed:"토큰 불러오기 실패",copied:"클립보드에 복사됨",copyFailed:"복사 실패 — 수동으로 선택하여 복사하세요"}},forecast:{title:"예측",noSpools:"활성 스풀을 찾을 수 없습니다. 예측 데이터를 보려면 재고에 스풀을 추가하세요.",noUsageData:"사용 데이터를 사용할 수 없습니다 — 재고 타임라인을 예측할 수 없습니다.",sku:"SKU",material:"재료",stock:"재고",dailyRate:"소비율",daysLeft:"남은 일수",emptyBy:"소진 예정일",reorderBy:"재주문 기한",actions:"작업",trend:"추세",estimated:"추정",noData:"데이터 없음",timeframe:"기간",chartTitle:"예상 재고 — 상위 5개 재료",dashedLinesROP:"점선 = 재주문 시점",stockLevel:"재고 수준",reorderPoint:"재주문 시점",safetyMargin:"안전 마진",trendLegend:"추세 (기록 기반, 95% 서비스 수준)",estimatedLegend:"추정 (무게 변화)",noDataLegend:"데이터 없음",ropLabel:"ROP",ssLabel:"SS",safetyStockLegend:"안전 재고",stockArrivalLegend:"재고 입고",stockoutLegend:"재고 소진",alertCount_one:"{{count}}개 알림",alertCount_other:"{{count}}개 알림",order:"주문",save:"저장",cancel:"취소",settingsSaved:"설정 저장됨",failedSaveSettings:"설정 저장 실패",globalLeadTimeSaved:"전역 리드 타임 저장됨",globalLeadTime:"전역 리드 타임",globalLeadTimeHint:"전역 리드 타임 하한값 — 모든 SKU의 재주문 시점 계산에 사용됨",skuLeadTimeOverride:"SKU 리드 타임 재정의",skuLeadTimeHint:"0 = 전역 리드 타임 사용. 이 SKU에 대해 재정의하려면 >0으로 설정.",safetyMarginLabel:"안전 마진",effectiveLeadTime:"유효 리드 타임",effectiveLeadTimeHint:"max(전역 {{global}}일, SKU {{sku}}일)",reorderPointHint:"d̄ × LT + 안전 마진 — 재고가 이 수준에 도달하면 주문",safetyMarginHint:"통계적 안전 재고 (z=1.65 × σ × √LT) + 사용자 정의 버퍼",safetyMarginHintDays:"통계적 안전 재고 위에 추가되는 버퍼.{{approx}}",safetyMarginHintDaysApprox:" ≈ 현재 소비율로 {{g}}g.",safetyMarginHintG:"통계적 안전 재고 위에 추가되는 고정 무게 버퍼.{{approx}}",safetyMarginHintGApprox:" ≈ 현재 소비율로 {{days}}일.",individualSpools:"개별 스풀",labelWeight:"라벨",spoolCount_one:"스풀 {{count}}개",spoolCount_other:"스풀 {{count}}개",stockBreakRisk:"재고 소진 위험",stockBreakDetail:"{{days}}일 남음, 리드 타임 {{lt}}일.",stockBreakBefore:"보충 전 재고 소진",reorderNow:"지금 재주문",reorderTriggerPassed:"트리거 날짜 {{date}}가 지났습니다.",shoppingList:"쇼핑 목록",shoppingListItems_one:"({{count}}개 항목)",shoppingListItems_other:"({{count}}개 항목)",shoppingListEmpty:"쇼핑 목록이 비어 있습니다. 항목을 추가하려면 행의 장바구니 아이콘을 클릭하세요.",addToCart:"쇼핑 목록에 추가",alertsSnoozed:"이 SKU의 알림 음소거",alertsEnabled:"이 SKU의 알림 음소거 해제",addedToCart:"쇼핑 목록에 추가됨",failedAddItem:"항목 추가 실패",listView:"목록",logisticsView:"물류",qty:"수량",weight:"무게",leadTime:"리드 타임",expectedRestock:"예상 재입고",status:"상태",note:"메모",pending:"대기 중",purchased:"구매됨",received:"수령됨",markPurchased:"구매됨으로 표시",markReceived:"수령됨으로 표시 — 재고에 스풀 추가",resetToPending:"대기 중으로 초기화",remove:"제거",clearAll:"모두 초기화",downloadCsv:"CSV",addToCartTitle:"쇼핑 목록에 추가",byQuantity:"수량 기준",byDuration:"기간 기준",numberOfSpools:"스풀 수",lastHowManyDays:"몇 일 동안 지속되어야 합니까?",noUsageQty:"사용 데이터 없음 — 수량을 1로 설정합니다.",noteOptional:"메모 (선택사항)",notePlaceholder:"예: 프로젝트 X용, 긴급…",addNSpools_one:"스풀 {{count}}개 추가",addNSpools_other:"스풀 {{count}}개 추가",onArrival:"입고 시",stockBreakIn:"{{days}}일 후 재고 소진.",stockRunsOutBefore:"{{lt}}일 리드 타임이 경과하기 전에 재고가 소진됩니다.",atRate:"{{rate}}g/일 소비율로",moreSpools_one:"스풀 {{count}}개 더",moreSpools_other:"스풀 {{count}}개 더",bridgeGap:"격차를 메우기 위해 필요합니다.",noReadAccess:"재고 예측을 볼 권한이 없습니다.",noWriteAccess:"예측 설정을 수정할 권한이 없습니다."},diagnostic:{modalTitle:"연결 진단 — {{name}}",running:"진단 실행 중...",runningElapsed:"진단 실행 중... ({{elapsed}}초)",waitingForReportHint:"프린터가 상태 보고를 게시하기를 기다리는 중 — 최대 {{max}}초 걸릴 수 있습니다.",runFailed:"진단 실행 실패: {{error}}",retry:"다시 실행",runButton:"진단 실행",sectionTitle:"연결 진단",sectionDescription:"프린터가 연결되지 않거나 인쇄되지 않는 이유를 확인합니다 — 포트 연결 가능 여부, LAN 개발자 모드, Docker 네트워크 모드, 자격증명.",noPrinters:"구성된 프린터가 없습니다.",overall:{ok:"문제가 발견되지 않았습니다 — 프린터 연결이 정상입니다.",warnings:"프린터가 작동하지만 일부 항목에 주의가 필요합니다.",problems:"프린터가 연결되지 않거나 인쇄되지 않는 원인이 되는 문제가 발견되었습니다."},check:{port_mqtt:{title:"제어 포트 (MQTT 8883)",pass:"연결 가능 — 프린터가 제어 연결을 수락하고 있습니다.",fail:"포트 8883에 연결할 수 없습니다. 프린터가 꺼져 있거나, IP 주소가 다르거나, 방화벽이 차단하고 있습니다. 프린터 IP를 확인하고 포트 8883이 차단되지 않았는지 확인하세요."},port_ftps:{title:"파일 전송 포트 (FTPS 990)",pass:"연결 가능 — 인쇄 파일 전송이 작동합니다.",warn:"포트 990에 연결할 수 없습니다. 모니터링은 작동할 수 있지만 프린터로 파일 전송에 실패합니다. 포트 990이 차단되지 않았는지 확인하세요."},port_rtsps:{title:"카메라 포트 (RTSPS 322)",pass:"연결 가능 — 카메라 스트림이 작동합니다.",warn:"포트 322에 연결할 수 없습니다. 라이브 카메라 보기가 작동하지 않습니다. 인쇄에는 영향을 주지 않습니다."},network_mode:{title:"Docker 네트워크 모드",pass:"호스트 네트워크 모드로 실행 중입니다.",warn:'Bambuddy가 Docker 브리지 네트워킹으로 실행 중입니다. 프린터 검색과 가상 프린터에는 호스트 네트워크 모드가 필요합니다 — "network_mode: host"로 컨테이너를 재생성하세요.',skip:"Docker에서 실행 중이 아닙니다 — 해당 없음."},subnet:{title:"네트워크 서브넷",pass:"프린터와 Bambuddy가 같은 서브넷에 있습니다.",warn:"프린터({{printer_ip}})와 Bambuddy({{host_ip}})가 다른 서브넷에 있습니다. 서브넷 간 라우팅이 구성되어 있지 않으면 서로 연결하지 못할 수 있습니다.",skip:"서브넷을 확인할 수 없어 건너뜁니다."},mqtt_auth:{title:"프린터 자격증명",pass:"프린터가 연결을 수락했습니다.",fail:"프린터에 연결됐지만 연결을 거부했습니다. 액세스 코드 또는 시리얼 번호가 잘못됐을 가능성이 높습니다. 개발자 모드를 토글할 때마다 액세스 코드가 변경됩니다 — 프린터 화면에서 다시 복사하세요.",skip:"확인하지 않음 — 프린터에 연결할 수 없었습니다."},developer_mode:{title:"LAN 개발자 모드",pass:"개발자 모드가 활성화되어 있습니다.",fail:"프린터에서 개발자 모드가 꺼져 있습니다. 프린터의 LAN 설정에서 활성화하고 확인을 누르세요. 이 없으면 인쇄가 시작되지 않습니다.",skip:"확인할 수 없음 — 프린터에 연결되어 있어야 합니다."},printer_publishing:{title:"프린터가 상태를 게시 중",pass:"프린터가 상태 업데이트를 게시하고 있습니다 — AMS, 필라멘트, K-프로파일이 슬라이서에 올바르게 반영됩니다.",fail:"MQTT 브로커는 연결을 수락했지만 프린터가 상태 보고를 게시하지 않았습니다. 거의 항상 시리얼 번호가 잘못되었거나 대소문자가 일치하지 않아서 발생합니다 — device/<serial>/report 토픽은 대소문자를 구분합니다. 프린터 설정의 시리얼 번호를 프린터 화면 표시와 비교해 확인하세요.",skip:"확인할 수 없음 — 프린터에 연결되어 있어야 합니다."}}},systemHealth:{sectionTitle:"시스템 상태",sectionDescription:"최근 로그에서 지원 티켓이 되기 전에 직접 해결할 수 있는 알려진 문제를 스캔합니다.",rescan:"다시 스캔",clean:"최근 {{times}}개 로그 항목에서 알려진 문제가 발견되지 않았습니다.",logUnavailable:"파일 로깅이 비활성화되어 로그를 스캔할 수 없습니다. 이 확인을 사용하려면 파일 로깅을 활성화하세요.",learnMore:"수정 방법",fixLabel:"수정:",occurrences:"{{times}}회 발견 — 마지막: {{lastSeen}}",category:{layer8:"직접 해결 가능",environment:"환경",bug:"버그 보고 바람"},signature:{"ftp-auth-rejected":{name:"프린터가 액세스 코드를 거부함",cause:"프린터가 파일 전송 로그인을 거부했습니다. 액세스 코드가 잘못됐거나 개발자 모드를 토글한 후 변경됐습니다.",fix:"프린터 화면(LAN 설정)에서 액세스 코드를 다시 복사하여 Bambuddy의 프린터 설정에서 업데이트하세요."},"ftp-connection-timeout":{name:"파일 전송 연결 시간 초과",cause:"Bambuddy가 프린터의 파일 전송 포트(FTPS 990)에 연결할 수 없었습니다. 포트가 차단됐거나 프린터가 꺼져 있거나 다른 서브넷에 있습니다.",fix:"Bambuddy와 프린터 사이에서 포트 990을 차단하는 것이 없는지 확인하고, 같은 네트워크에 있는지 확인하세요."},"ftp-ssl-error":{name:"보안 파일 전송 핸드셰이크 실패",cause:"프린터의 파일 전송 서버와의 TLS 핸드셰이크가 실패했습니다. 주로 방화벽이나 오래된 프린터 펌웨어가 원인입니다.",fix:"프린터 펌웨어를 업데이트하고 방화벽이나 프록시가 포트 990에서 연결을 가로채지 않는지 확인하세요."},"mqtt-connection-flapping":{name:"프린터 연결이 계속 끊김",cause:"제어 연결(MQTT 8883)이 반복적으로 끊어지고 다시 연결됩니다 — 주로 불안정한 네트워크 경로나 부분적으로 차단된 포트가 원인입니다.",fix:"프린터의 Wi-Fi 신호를 확인하고, 유선 연결을 권장하며, 포트 8883이 안정적으로 연결 가능한지 확인하세요."},"camera-connection-refused":{name:"카메라 스트림 연결 불가",cause:"포트 RTSPS 322에서 라이브 카메라에 연결할 수 없었습니다. 포트가 차단됐거나 프린터에서 카메라 또는 LAN 라이브뷰가 꺼져 있습니다.",fix:"프린터에서 카메라와 LAN 라이브뷰를 활성화하고 포트 322가 차단되지 않았는지 확인하세요. 인쇄에는 영향을 주지 않습니다."},"database-locked":{name:"데이터베이스 쓰기 경합",cause:'SQLite 데이터베이스에 부하 시 "database is locked" 오류가 발생합니다 — 여러 프린터를 동시에 실행할 때 흔한 문제입니다.',fix:"Bambuddy를 외부 PostgreSQL 데이터베이스로 전환하세요. 설명서의 PostgreSQL 가이드를 참고하세요."}}},vpDiagnostic:{title:"설정 확인 — {{name}}",runButton:"설정 확인 실행",running:"설정 확인 실행 중...",runFailed:"설정 확인을 실행할 수 없습니다: {{error}}",retry:"다시 실행",overall:{ok:"모든 확인이 통과됐습니다 — 이 가상 프린터가 올바르게 설정되었습니다.",warnings:"가상 프린터가 작동하지만 일부 항목에 주의가 필요합니다.",problems:"슬라이서가 이 가상 프린터를 인식하거나 사용할 수 없는 원인이 되는 문제가 발견되었습니다."},check:{enabled:{title:"가상 프린터 활성화",fail:"이 가상 프린터가 꺼져 있습니다. 검색 가능하게 하려면 켜세요."},running:{title:"서비스 실행 중",fail:"가상 프린터가 활성화됐지만 서비스가 실행 중이 아닙니다. Bambuddy 로그를 확인하세요 — 바인드 IP 충돌이나 권한 오류가 보통 원인입니다."},bind_interface:{title:"바인드 네트워크 인터페이스",fail:"바인드 인터페이스가 설정되지 않았거나 이 호스트에 더 이상 존재하지 않습니다. 바인드 인터페이스 드롭다운에서 현재 인터페이스를 선택하세요."},access_code:{title:"액세스 코드 설정됨",fail:"액세스 코드가 설정되지 않았습니다. 슬라이서에는 여기에 설정한 것과 동일한 8자리 액세스 코드가 필요합니다."},target_printer:{title:"대상 프린터",fail:"대상 프린터가 선택되지 않았습니다. 프록시 모드에는 실제 프린터가 필요합니다.",warn:"대상 프린터가 현재 오프라인입니다 — 재연결되면 프록시가 재개됩니다."},port_ftps:{title:"파일 업로드 서비스 (포트 {{port}})",fail:"바인드 IP의 포트 {{port}}에서 수신 중인 서비스가 없어 슬라이서가 파일을 업로드할 수 없습니다. 이 인터페이스의 포트 충돌이 일반적인 원인입니다."},port_mqtt:{title:"제어 서비스 (포트 {{port}})",fail:"바인드 IP의 포트 {{port}}에서 수신 중인 서비스가 없어 슬라이서가 연결하거나 상태를 표시할 수 없습니다."},port_bind:{title:"검색 서비스 (포트 {{port}})",fail:"바인드 IP의 포트 {{port}}에서 수신 중인 서비스가 없어 슬라이서의 검색 핸드셰이크가 실패합니다."},certificate:{title:"TLS 인증서",pass:"인증서가 준비됐습니다. Bambuddy CA 인증서(위)가 슬라이서의 신뢰 저장소에 가져와져 있는지 확인하세요.",fail:"이 가상 프린터의 TLS 인증서가 없습니다. Bambuddy 데이터 디렉터리가 쓰기 가능한지 확인하세요."}}}},Ppe={nav:{printers:"Impressoras",archives:"Arquivos",queue:"Fila de impressão",stats:"Estatísticas",profiles:"Perfis",maintenance:"Manutenção",projects:"Projetos",inventory:"Inventário",files:"Gerenciador de Arquivos",makerworld:"MakerWorld",notifications:"Notificações",settings:"Configurações",system:"Sistema",collapseSidebar:"Recolher barra lateral",expandSidebar:"Expandir barra lateral",update:"Atualizar",updateAvailable:"Atualização disponível: v{{version}}",updateAvailableBanner:"Versão {{version}} está disponível!",viewUpdate:"Ver atualização",viewOnGithub:"Ver no GitHub",keyboardShortcuts:"Atalhos de teclado (?)",switchToLight:"Mudar para modo claro",switchToDark:"Mudar para modo escuro",switchToSystem:"Mudar para modo do sistema",smartSwitches:"Interruptores inteligentes",logout:"Sair",installApp:"Instalar app",installAppSuccess:"Bambuddy foi instalado"},common:{save:"Salvar",saving:"Salvando...",cancel:"Cancelar",delete:"Excluir",edit:"Editar",add:"Adicionar",close:"Fechar",confirm:"Confirmar",loading:"Carregando...",error:"Erro",errorLoading:"Erro ao carregar",retry:"Tentar novamente",success:"Sucesso",warning:"Aviso",enabled:"Ativado",disabled:"Desativado",yes:"Sim",no:"Não",on:"Ligado",off:"Desligado",all:"Todos",none:"Nenhum",search:"Pesquisar",filter:"Filtrar",sort:"Ordenar",refresh:"Atualizar",download:"Baixar",upload:"Enviar",uploading:"Enviando...",uploadFailed:"Falha no envio",actions:"Ações",status:"Status",name:"Nome",description:"Descrição",date:"Data",time:"Hora",hours:"Horas",minutes:"Minutos",seconds:"Segundos",days:"Dias",enable:"Ativar",disable:"Desativar",permissions:"Permissões",noPrinters:"Nenhuma impressora configurada",noData:"Nenhum dado disponível",linkNotFound:"Link não encontrado",required:"Obrigatório",optional:"Opcional",dismiss:"Dispensar",apply:"Aplicar",reset:"Redefinir",export:"Exportar",import:"Importar",clear:"Limpar",selectAll:"Selecionar tudo",deselectAll:"Desmarcar tudo",noChange:"— Sem alterações —",unchanged:"Inalterado",unassigned:"Não atribuído",unknown:"Desconhecido",unknownError:"Erro desconhecido",today:"Hoje",tomorrow:"Amanhã",asap:"O mais rápido possível",overdue:"Atrasado",now:"Agora",collapse:"Recolher",expand:"Expandir",viewArchive:"Ver arquivo",viewInFileManager:"Ver no Gerenciador de Arquivos",addedBy:"Adicionado por {{username}}",prints:"impressões",more:"+{{count}} mais",ascending:"Crescente",descending:"Decrescente",back:"Voltar",copy:"Copiar",copied:"Copiado!",printer:"Impressora",remove:"Remover",type:"Tipo",print:"Imprimir",rename:"Renomear",move:"Mover",create:"Criar",duplicate:"Duplicar",left:"Esquerda",right:"Direita"},printers:{addPreflight:{checking:"Verificando a conexão...",warning:"Algumas verificações de conexão falharam. Esta impressora pode aparecer como offline. Revise as verificações abaixo, corrija o que puder ou salve mesmo assim.",back:"Voltar",saveAnyway:"Salvar mesmo assim"},title:"Impressoras",addPrinter:"Adicionar Impressora",editPrinter:"Editar Impressora",deletePrinter:"Excluir Impressora",printerName:"Nome da Impressora",serialNumber:"Número de Série",ipAddress:"Endereço IP / Nome do Host",accessCode:"Código de Acesso",model:"Modelo",nozzleCount:"Número de Bicos",autoArchive:"Arquivamento Automático",status:{available:"Disponível",idle:"Ocioso",printing:"Imprimindo",paused:"Pausado",offline:"Offline",problem:"Problema",error:"Erro",finished:"Concluído",unknown:"Desconhecido"},temperatures:{nozzle:"Bico",bed:"Cama",chamber:"Câmara"},progress:"{{percent}}% concluído",timeRemaining:"{{time}} restante",deleteConfirm:'Tem certeza de que deseja excluir "{{name}}"?',maintenanceOk:"Manutenção OK",maintenanceWarning:"{{count}} aviso",maintenanceWarning_plural:"{{count}} avisos",maintenanceDue:"{{count}} devido",maintenanceDue_plural:"{{count}} devido",sort:{name:"Nome",status:"Status",model:"Modelo",location:"Localização",ascending:"Ordem crescente",descending:"Ordem decrescente"},cardSize:{small:"Cartões pequenos",medium:"Cartões médios",large:"Cartões grandes",extraLarge:"Cartões extra grandes"},hideOffline:"Ocultar offline",nextAvailable:"Próximo disponível",powerOn:"Ligar",offlinePrintersWithPlugs:"Impressoras offline com tomadas inteligentes",noPrintersConfigured:"Nenhuma impressora configurada ainda",search:"Pesquisar impressoras...",noSearchResults:"Nenhuma impressora corresponde à sua pesquisa ou filtros",filter:{allStatuses:"Todos os status",allLocations:"Todos os locais"},toolbar:{filters:"Filtros",view:"Visualização",actions:"Ações"},readyToPrint:"Pronto para imprimir",external:"Externo",extL:"Ext-L",extR:"Ext-R",deleteArchives:"Excluir arquivos de impressão",noLabel:"Sem etiqueta",printPreview:"Pré-visualização de impressão",width:"Largura",height:"Altura",noObjectsFound:"Nenhum objeto encontrado",objectsLoadedOnPrintStart:"Objetos são carregados quando uma impressão começa",willBeSkipped:"Será ignorado",name:"Nome",serialCannotBeChanged:"Número de série não pode ser alterado",locationHelp:"Usado para agrupar impressoras e filtrar trabalhos na fila",wifiSignal:{veryWeak:"Muito fraco",weak:"Fraco",fair:"Regular",good:"Bom",excellent:"Excelente"},maintenanceUpToDate:"Toda a manutenção está em dia - Clique para ver",chamberLightOn:"Ligar luz da câmara",chamberLightOff:"Desligar luz da câmara",files:"Arquivos",browseFiles:"Procurar arquivos da impressora",autoOffAfterPrint:"Desligamento automático após impressão",autoOffExecuted:"Desligamento automático executado - ligue a impressora para reiniciar",hmsErrors:"Erros HMS",viewHmsErrors:"Ver {{count}} erro(s) HMS",resume:"Retomar",pause:"Pausar",stop:"Parar",camera:"âmera",skipObject:"Ignorar objeto",reconnect:"Reconectar",forceRefresh:"Forçar atualização",forceRefreshSuccess:"Atualização solicitada",mqttDebug:"Depuração MQTT",printerInformation:"Informações da impressora",copyToClipboard:"Copiar",copied:"Copiado!",state:"Estado",wifiSignalLabel:"Sinal WiFi",developerMode:"Modo desenvolvedor",enabled:"Ativado",disabled:"Desativado",addedOn:"Adicionada em",sdCard:"Cartão SD",inserted:"Inserido",notInserted:"Não inserido",totalPrintHours:"Horas de impressão",activeNozzle:"Ativo: {{nozzle}} bico",nozzleRack:"Suporte de bicos",nozzleDocked:"Acoplado",nozzleMounted:"Montado",nozzleActive:"Ativo",nozzleIdle:"Ocioso",nozzleDiameter:"Diâmetro",nozzleType:"Tipo",nozzleStatus:"Status",nozzleFilament:"Filamento",nozzleWear:"Desgaste",nozzleMaxTemp:"Temp Máx",nozzleSerial:"Número de série",nozzleHardenedSteel:"Aço Endurecido",nozzleStainlessSteel:"Aço Inoxidável",nozzleTungstenCarbide:"Carboneto de Tungstênio",nozzleFlow:"Fluxo",nozzleHighFlow:"Alto Fluxo",nozzleStandardFlow:"Fluxo Padrão",firmwareUpdate:"Atualização de Firmware",firmwareInstructions:"No visor da impressora, vá para",firmwareNav:"Navegar para",settings:"Configurações",firmware:"Firmware",discoverPrinters:"Descobrir Impressoras",searching:"Procurando...",manualEntry:"Entrada Manual",addFromCloud:"Adicionar da Nuvem",toast:{printerDeleted:"Impressora excluída",missingSpoolAssignment:"Impressão iniciada em {{printer}}. Atribuição de bobina ausente para: {{slots}}",printerAdded:"Impressora adicionada",printerUpdated:"Impressora atualizada",failedToDelete:"Falha ao excluir impressora",failedToAdd:"Falha ao adicionar impressora",connectionFailedNotAdded:"Não foi possível conectar à impressora. Verifique o IP, o número de série e o código de acesso, e confirme que o modo somente LAN está ativado. A impressora não foi adicionada.",failedToUpdate:"Falha ao atualizar impressora",commandSent:"Comando enviado",failedToSendCommand:"Falha ao enviar comando",turnedOn:"{{name}} ligado",failedToPowerOn:"Falha ao ligar {{name}}",scriptTriggered:"Script acionado",printStopped:"Impressão parada",printPaused:"Impressão pausada",printResumed:"Impressão retomada",referenceDeleted:"Referência excluída",detectionAreaSaved:"Área de detecção salva",failedToRunScript:"Falha ao executar script",failedToStopPrint:"Falha ao parar impressão",failedToPausePrint:"Falha ao pausar impressão",failedToResumePrint:"Falha ao retomar impressão",failedToControlChamberLight:"Falha ao controlar a luz da câmara",failedToSetSpeed:"Falha ao definir a velocidade de impressão",failedToUpdateSetting:"Falha ao atualizar configuração",failedToSkipObjects:"Falha ao ignorar objetos",failedToRereadRfid:"Falha ao reler RFID",failedToCheckPlate:"Falha ao verificar a placa",failedToUpdateLabel:"Falha ao atualizar etiqueta",failedToDeleteReference:"Falha ao excluir referência",failedToSaveDetectionArea:"Falha ao salvar área de detecção",plateCheckEnabled:"Verificação da placa ativada",plateCheckDisabled:"Verificação da placa desativada",calibrationSaved:"Calibração salva!",calibrationFailed:"Falha na calibração",rfidRereadInitiated:"Releitura de RFID iniciada",loadInitiated:"Carregando filamento…",unloadInitiated:"Descarregando filamento…",failedToLoad:"Falha ao carregar filamento",failedToUnload:"Falha ao descarregar filamento"},connection:{connected:"Conectado",offline:"Offline"},plateStatus:{markCleared:"Marcar placa como liberada",cleared:"Placa liberada",notCleared:"Placa não liberada",inUse:"Placa em uso"},queue:{inQueue:"{{count}} impressão na fila",inQueue_plural:"{{count}} impressões na fila"},controls:"Controles",rfid:{reread:"Releitura de RFID"},ams:{load:"Carregar",unload:"Descarregar"},bedJog:{title:"Mover a mesa de impressão",bed:"Mesa",step:"Passo (mm)",up:"Mover mesa para cima",down:"Mover mesa para baixo",disabledWhilePrinting:"Desativado durante a impressão",notHomedTitle:"Impressora não referenciada",notHomedMessage:"A impressora não foi referenciada desde a última impressão. Execute a referência automática primeiro para um posicionamento seguro (estaciona o cabeçote, depois referencia X, Y e Z), ou mova assim mesmo — os fins de curso de software serão ignorados.",homeZ:"Referência automática",moveAnyway:"Mover assim mesmo",homingStarted:"Referenciando impressora automaticamente…"},permission:{noAdd:"Você não tem permissão para adicionar impressoras",noEdit:"Você não tem permissão para editar impressoras",noDelete:"Você não tem permissão para excluir impressoras",noControl:"Você não tem permissão para controlar impressoras",noFiles:"Você não tem permissão para acessar arquivos de impressora",noAmsRfid:"Você não tem permissão para reler RFID AMS",noSmartPlugControl:"Você não tem permissão para controlar tomadas inteligentes",noCamera:"Você não tem permissão para visualizar câmeras"},modal:{addTitle:"Adicionar Impressora",editTitle:"Editar Impressora",myPrinter:"Minha Impressora",selectModel:"Selecionar modelo...",locationGroup:"Localização / Grupo (opcional)",locationPlaceholder:"ex.: Oficina, Escritório, Porão",autoArchiveLabel:"Arquivar automaticamente impressões concluídas",fromPrinterSettings:"A partir das configurações da impressora",modelOptional:"Modelo (opcional)",saveChanges:"Salvar alterações"},skipObjects:{tooltip:"Ignorar objetos",onlyWhilePrinting:"Ignorar objetos (apenas durante a impressão)",requiresMultiple:"Ignorar objetos (requer 2+ objetos)",title:"Ignorar Objetos",matchIdsInfo:"Correspondência de IDs com o display da sua impressora",printerShowsIds:"A tela da impressora mostra os IDs dos objetos na placa de construção",skipSelected:"Ignorar Selecionados",skipping:"Ignorando...",noObjectsSelected:"Nenhum objeto selecionado",selectObjectsToSkip:"Selecione os objetos que deseja ignorar na impressão atual",skipped:"Ignorado",objectsSkipped:"Objetos ignorados",activeCount:"{{count}} ativo",waitForLayer:"Aguarde a camada 2+ para ignorar objetos (atualmente na camada {{layer}})",skip:"Ignorar",confirmTitle:"Ignorar Objeto?",confirmMessage:'Tem certeza de que deseja ignorar "{{name}}"? Isso não pode ser desfeito.'},confirm:{deleteTitle:"Excluir Impressora",deleteMessage:'Tem certeza de que deseja excluir "{{name}}"? Isso removerá todas as configurações de conexão.',deleteArchivesNote:"Todo o histórico de impressão desta impressora será permanentemente excluído.",keepArchivesNote:"O histórico de impressão será mantido, mas não estará mais associado a esta impressora.",stopTitle:"Parar Impressão",stopMessage:'Tem certeza de que deseja parar a impressão atual em "{{name}}"? Isso cancelará o trabalho de impressão.',stopButton:"Parar Impressão",pauseTitle:"Pausar Impressão",pauseMessage:'Tem certeza de que deseja pausar a impressão atual em "{{name}}"?',pauseButton:"Pausar Impressão",resumeTitle:"Retomar Impressão",resumeMessage:'Tem certeza de que deseja retomar a impressão em "{{name}}"?',resumeButton:"Retomar Impressão",powerOnTitle:"Ligar Impressora",powerOnMessage:'Tem certeza de que deseja ligar a impressora "{{name}}"?',powerOnButton:"Ligar",powerOffTitle:"Desligar Impressora",powerOffMessage:'Tem certeza de que deseja desligar a impressora "{{name}}"?',powerOffWarning:'AVISO: "{{name}}" está imprimindo no momento! Tem certeza de que deseja desligar a impressora? Isso interromperá a impressão e pode danificar a impressora.',powerOffButton:"Desligar",haToggleTitle:'Alternar "{{name}}"',haToggleMessage:"Alternar a entidade Home Assistant {{entity}}? Isso pode desligar a energia se estiver ligada no momento.",haToggleWarning:'AVISO: "{{name}}" está imprimindo no momento! Alternar {{entity}} pode cortar a energia e interromper a impressão. Continuar?',haToggleButton:"Alternar"},bulk:{select:"Selecionar",selectAll:"Selecionar tudo",selectByLocation:"Selecionar por local",selected:"{{count}} selecionado(s)",actions:{stop:"Parar",pause:"Pausar",resume:"Retomar",clearPlate:"Limpar mesa",clearHMS:"Limpar notificações"},confirm:{stopTitle:"Parar {{count}} impressões",stopMessage:"Isso cancelará as impressões ativas em {{count}} impressora(s). Esta ação não pode ser desfeita.",stopButton:"Parar todas",pauseTitle:"Pausar {{count}} impressões",pauseMessage:"Isso pausará as impressões ativas em {{count}} impressora(s).",pauseButton:"Pausar todas",clearPlateTitle:"Limpar {{count}} mesas de impressão",clearPlateMessage:"Isso limpará a mesa de impressão em {{count}} impressora(s) e pode iniciar trabalhos na fila.",clearPlateButton:"Limpar todas"},success:"{{action}} concluído em {{count}} impressora(s)",partial:"{{succeeded}} bem-sucedido(s), {{failed}} falhou/falharam",noneApplicable:"Nenhuma impressora selecionada está no estado correto para esta ação",selectByState:"Selecionar por estado"},discovery:{title:"Descobrir Impressoras",searching:"Procurando...",scanning:"Escaneando...",scanProgress:"Escaneando... {{scanned}}/{{total}}",foundPrinters:"{{count}} impressora(s) encontrada(s)",noPrintersFound:"Nenhuma impressora encontrada",noPrintersFoundSubnet:"Nenhuma impressora encontrada na sub-rede especificada.",noPrintersFoundNetwork:"Nenhuma impressora encontrada na rede.",allConfigured:"Todas as impressoras descobertas já estão configuradas.",alreadyAdded:"Já adicionada",select:"Selecionar",manualEntry:"Entrada Manual",addFromCloud:"Adicionar da Nuvem",subnetToScan:"Sub-rede para escanear",dockerNote:"Docker detectado. Insira a sub-rede da sua impressora em notação CIDR. Requer network_mode: host no docker-compose.yml.",scanSubnet:"Escanear Sub-rede para Impressoras",discoverNetwork:"Descobrir Impressoras na Rede",scanningSubnet:"Escaneando sub-rede para impressoras Bambu...",scanningNetwork:"Escaneando rede...",serialRequired:"Serial necessário",unknown:"Desconhecido",failedToStart:"Falha ao iniciar a descoberta",customSubnetOption:"Sub-rede personalizada...",customSubnetLabel:"Sub-rede personalizada (CIDR)",customSubnetNote:"Use uma sub-rede personalizada se sua impressora estiver em uma rede diferente deste servidor. As portas FTP (990) e MQTT (8883) devem estar acessíveis através do limite de roteamento."},drying:{start:"Iniciar secagem",stop:"Parar secagem",temperature:"Temperatura",duration:"Duração",hours:"horas",timeRemaining:"{{time}} restante",active:"Secagem",notSupported:"Secagem não suportada",powerRequired:"Conecte o adaptador de energia AMS para ativar a secagem",startingDrying:"Iniciando secagem...",stoppingDrying:"Parando secagem...",rotateTray:"Girar o carretel durante a secagem"},filaments:"Filamentos",openCameraOverlay:"Abrir sobreposição da câmera",openCameraWindow:"Abrir câmera em nova janela",firmwareUpdateAvailable:"Atualização de firmware disponível: {{current}} → {{latest}}",firmwareUpToDate:"Firmware {{version}} — Atualizado",firmwareUpdateButton:"Atualizar",plateDetection:{noPermission:"Você não tem permissão para atualizar impressoras",enabledClick:"Verificação da placa ativada - Clique para desativar",disabledClick:"Verificação da placa desativada - Clique para ativar",manageCalibration:"Gerenciar calibração da detecção da placa",calibrationRequired:"Calibração necessária",calibrationInstructions:"Certifique-se de que a placa de construção esteja <strong>completamente vazia</strong>, em seguida clique em Calibrar.",calibrationDescription:"A calibração captura uma imagem de referência da placa vazia. Verificações futuras compararão com esta referência para detectar objetos.",calibrationTip:"<strong>Dica:</strong> Você pode armazenar até 5 calibrações para diferentes placas. O sistema usa automaticamente a melhor correspondência ao verificar.",plateEmpty:"A placa parece vazia",objectsDetected:"Objetos detectados na placa",confidence:"Confiança",difference:"Diferença",analysisPreview:"Pré-visualização da análise:",analysisLegend:"Caixa verde = área de detecção, Sobreposição vermelha = diferenças em relação à calibração",savedReferences:"Referências salvas ({{count}}/{{max}})",deleteReference:"Excluir referência",labelPlaceholder:"Etiqueta...",clickToEdit:"{{label}} - Clique para editar",clickToAddLabel:"Clique para adicionar etiqueta"},speed:{title:"Velocidade de impressão",silent:"Silencioso (50%)",standard:"Padrão (100%)",sport:"Sport (124%)",ludicrous:"Ludicrous (166%)"},airduct:{title:"Modo do duto de ar",cooling:"Resfriamento",heating:"Aquecimento"},noSdCard:"Sem SD",door:{open:"Aberta",closed:"Fechada"},fans:{partCooling:"Ventilador de resfriamento da peça",auxiliary:"Ventilador auxiliar",chamber:"Ventilador da câmara"},clickToViewHmsErrors:"Clique para ver erros do HMS",estimatedCompletion:"Tempo estimado de conclusão",plateNumber:"Placa {{number}}",slotOptions:"Opções de slot",amsPopup:{friendlyName:"Nome do AMS",friendlyNamePlaceholder:"ex.: Nome amigável do AMS",serialNumber:"Número de série",firmwareVersion:"Firmware",save:"Salvar",clear:"Limpar",noEditPermission:"Você não tem permissão para renomear unidades AMS"},firmwareModal:{title:"Atualização de Firmware",titleUpToDate:"Informações do Firmware",currentVersion:"Atual:",latestVersion:"Última:",releaseNotes:"Notas de Lançamento",checkingPrereqs:"Verificando pré-requisitos...",sdCardReady:"Cartão SD pronto. Clique abaixo para enviar o firmware.",uploadedSuccess:"Firmware enviado para o cartão SD!",applyInstructions:"Para aplicar a atualização na sua impressora:",step1:"Na tela sensível ao toque da impressora, vá para <strong>Configurações</strong>",step2:"Navegue até <strong>Firmware</strong>",step3:"Selecione <strong>Atualizar a partir do cartão SD</strong>",step4:"A atualização levará de 10 a 20 minutos",done:"Concluído",starting:"Iniciando...",uploadFirmware:"Enviar Firmware",uploadFailed:"Falha ao iniciar o envio: {{error}}",uploadedToast:"Firmware enviado! Inicie a atualização na tela da impressora.",availableVersions:"Versões disponíveis",usable:"Utilizável",unavailable:"Indisponível",installed:"Instalada",newerBadge:"mais recente",olderBadge:"mais antiga",currentBadge:"atual"},accessCodePlaceholder:"Deixe vazio para manter o atual",roi:{title:"Área de Detecção (ROI)",xStart:"Início X",yStart:"Início Y",width:"Largura",height:"Altura",instruction:"Ajuste a área de detecção para focar na placa de construção. A caixa verde na pré-visualização mostra a área atual."},developerModeWarning:"O modo desenvolvedor LAN não está ativado em: {{names}}. Alguns recursos podem não funcionar.",howToEnable:"Como ativar",incompatibleFile:"Este arquivo foi fatiado para {{slicedFor}}, mas esta impressora é uma {{printerModel}}",dropNotPrintable:"Apenas arquivos .gcode e .gcode.3mf podem ser impressos",dropToPrint:"Solte para imprimir",cannotPrint:"Impressora ocupada"},archives:{title:"Arquivos de Impressão",searchPlaceholder:"Pesquisar arquivos...",filterByPrinter:"Filtrar por impressora",filterByStatus:"Filtrar por status",sortBy:"Ordenar por",sortNewest:"Mais recentes primeiro",sortOldest:"Mais antigos primeiro",sortName:"Nome",sortDuration:"Duração",sortLargest:"Maiores primeiro",sortSmallest:"Menores primeiro",sortSize:"Tamanho",noArchives:"Nenhum arquivo encontrado",noArchivesSearch:"Nenhum arquivo corresponde à sua pesquisa",originalPrintNotVisible:"Impressão original não visível - tente limpar os filtros",noArchivesYet:"Ainda não há arquivos",prints:"impressões",pagination:{showing:"Mostrando",to:"a",of:"de",show:"Mostrar",page:"Página",all:"Todos"},loadingArchives:"Carregando arquivos...",releaseToUpload:"Solte para enviar",showAll:"Mostrar todos",showFavoritesOnly:"Mostrar apenas favoritos",gridView:"Visualização em grade",listView:"Visualização em lista",calendarView:"Visualização em calendário",logView:"Registro de impressão",manageTags:"Gerenciar etiquetas",showFailedPrints:"Mostrar impressões falhas",hideFailedPrints:"Ocultar impressões falhas",hideDuplicates:"Ocultar duplicados",viewOriginalPrint:"Clique para visualizar a impressão original (#{{id}})",printTime:"Tempo de impressão",filamentUsed:"Filamento usado",cost:"Custo",reprint:"Reimprimir",preview:"Pré-visualizar",deleteArchive:"Excluir arquivo",deleteConfirm:"Tem certeza de que deseja excluir este arquivo?",favorite:"Favorito",unfavorite:"Remover dos favoritos",viewDetails:"Ver detalhes",status:{completed:"Concluído",failed:"Falhou",stopped:"Parado"},toast:{source3mfAttached:"Arquivo de origem 3MF anexado: {{filename}}",failedUploadSource3mf:"Falha ao enviar arquivo de origem 3MF",source3mfRemoved:"Arquivo de origem 3MF removido",failedRemoveSource3mf:"Falha ao remover arquivo de origem 3MF",f3dAttached:"F3D anexado: {{filename}}",failedUploadF3d:"Falha ao enviar F3D",f3dRemoved:"F3D removido",failedRemoveF3d:"Falha ao remover F3D",timelapseAttached:"Timelapse anexado: {{filename}}",timelapseAlreadyAttached:"Timelapse já anexado",noMatchingTimelapse:"Nenhum timelapse correspondente encontrado",failedScanTimelapse:"Falha ao escanear timelapse",failedAttachTimelapse:"Falha ao anexar timelapse",timelapseRemoved:"Timelapse removido",failedRemoveTimelapse:"Falha ao remover timelapse",timelapseUploaded:"Timelapse enviado: {{filename}}",failedUploadTimelapse:"Falha ao enviar timelapse",archiveDeleted:"Arquivo excluído",failedDeleteArchive:"Falha ao excluir arquivo",addedToFavorites:"Adicionado aos favoritos",removedFromFavorites:"Removido dos favoritos",projectUpdated:"Projeto atualizado",failedUpdateProject:"Falha ao atualizar projeto",linkCopied:"Link copiado para a área de transferência",failedCopyLink:"Falha ao copiar link",photoDeleted:"Foto excluída",failedDeletePhoto:"Falha ao excluir foto",failedDeleteArchives:"Falha ao excluir arquivos",failedUpdateFavorites:"Falha ao atualizar favoritos",exportDownloaded:"Exportação baixada",exportFailed:"Falha na exportação"},menu:{print:"Imprimir",schedule:"Agendar",openInBambuStudio:"Abrir no Slicer",slice:"Fatiar",externalLink:"Link externo",viewOnMakerWorld:"Ver no MakerWorld",preview3d:"Pré-visualização 3D",viewTimelapse:"Ver Timelapse",scanForTimelapse:"Escanear Timelapse",uploadTimelapse:"Enviar Timelapse",removeTimelapse:"Remover Timelapse",downloadSource3mf:"Baixar Source 3MF",uploadSource3mf:"Enviar Source 3MF",replaceSource3mf:"Substituir Source 3MF",removeSource3mf:"Remover Source 3MF",uploadF3d:"Enviar F3D",replaceF3d:"Substituir F3D",downloadF3d:"Baixar F3D",removeF3d:"Remover F3D",download:"Baixar",copyDownloadLink:"Copiar link de download",qrCode:"Qr Code",viewPhotos:"Ver fotos",viewPhotosCount:"Ver fotos ({{count}})",projectPage:"Página do projeto",addToFavorites:"Adicionar aos favoritos",removeFromFavorites:"Remover dos favoritos",edit:"Editar",printLog:"Histórico de impressões",goToProject:"Ir para o projeto: {{name}}",addToProject:"Adicionar ao projeto",removeFromProject:"Remover do projeto",loading:"Carregando...",noProjectsAvailable:"Nenhum projeto disponível",searchProjects:"Pesquisar projetos…",select:"Selecionar",deselect:"Desmarcar",delete:"Excluir"},permission:{noReprint:"Você não tem permissão para reimprimir este arquivo",noAddToQueue:"Você não tem permissão para adicionar à fila",noUpdateArchives:"Você não tem permissão para atualizar arquivos",noUploadFiles:"Você não tem permissão para enviar arquivos",noDownload:"Você não tem permissão para baixar arquivos",noCopyLink:"Você não tem permissão para copiar links de download",noDelete:"Você não tem permissão para excluir este arquivo",noCreate:"Você não tem permissão para criar arquivos"},platePicker:{title:"Selecione a placa para visualizar",hint:"Este arquivo contém várias placas. Escolha uma para abrir no visualizador GCode.",plateLabel:"Placa {{index}}",objectCount:"{{count}} objeto",objectCount_plural:"{{count}} objetos",noGcode:"Este arquivo não contém G-code fatiado para visualizar. Abra-o no Bambu Studio para fatiar primeiro."},card:{previousPlate:"Placa anterior",nextPlate:"Próxima placa",plateNumber:"Placa {{index}}",moreOptions:"Clique com o botão direito para mais opções",addToFavorites:"Adicionar aos favoritos",removeFromFavorites:"Remover dos favoritos",cancelled:"cancelado",failed:"falha",duplicate:"duplicado",duplicateTitle:"Este modelo já foi impresso antes",openSource3mf:"Abrir source 3MF no Bambu Studio (clique com o botão direito para mais opções)",downloadF3d:"Baixar arquivo de design do Fusion 360",viewTimelapse:"Ver timelapse",viewPhoto:"Ver 1 foto",viewPhotos:"Ver {{count}} fotos",openFolder:"Abrir pasta: {{name}}",slicedFile:"Arquivo fatiado - pronto para imprimir",sourceFile:"Apenas arquivo fonte - nenhum mapeamento AMS disponível",gcode:"GCODE",source:"SOURCE",project:"Projeto: {{name}}",runsBadge:"{{count}} impressões",runsBadgeTitle:"{{count}} impressões no total — {{successful}} bem-sucedidas, {{failed}} com falha. Clique para ver o histórico completo.",estimated:"Estimado: {{time}}",actual:"Real: {{time}}",accuracy:"Precisão: {{percent}}%",filament:"{{weight}} g",layer:"{{count}} camada",layers:"{{count}} camadas",object:"{{count}} objeto",objects:"{{count}} objetos",slicedFor:"Fatiado para {{model}}",uploadedBy:"Enviado por",noPermissionReprint:"Você não tem permissão para reimprimir",noFileForReprint:"Nenhum arquivo 3MF disponível — o arquivo não pôde ser baixado da impressora quando a impressão foi registrada",noPermissionEdit:"Você não tem permissão para editar arquivos",noPermissionDelete:"Você não tem permissão para excluir arquivos",reprint:"Reimprimir",schedulePrint:"Agendar impressão",schedule:"Agendar",openInBambuStudio:"Abrir no Bambu Studio",openInBambuStudioToSlice:"Abrir no Bambu Studio para fatiar",slice:"Fatiar",externalLink:"Link externo",makerWorld:"MakerWorld – {{designer}}",viewProject:"Ver projeto",noExternalLink:"Nenhum link externo",preview3d:"Visualização 3D",download:"Baixar",edit:"Editar",delete:"Excluir"},runLog:{title:"Histórico de impressões",modalTitle:"Histórico de impressões — {{name}}",modalTitleFallback:"este arquivo",empty:"Nenhum evento de impressão registrado para este arquivo ainda.",col:{date:"Data",status:"Status",duration:"Duração",filament:"Filamento",cost:"Custo"},status:{completed:"Concluída",failed:"Falhou",cancelled:"Cancelada",stopped:"Interrompida",skipped:"Ignorada",printing:"Imprimindo"}},modal:{deleteArchive:"Excluir Arquivo",deleteConfirm:'Tem certeza de que deseja excluir "{{name}}"? Esta ação não pode ser desfeita.',deleteButton:"Excluir",deletePurgeStats:"Remover também esta impressão das Quick Stats (filamento, tempo, custo, energia)",removeSource3mf:"Remover Source 3MF",removeSource3mfConfirm:'Tem certeza de que deseja remover o arquivo source 3MF de "{{name}}"? Isso excluirá o arquivo original do projeto do fatiador.',removeButton:"Remover",removeF3d:"Remover F3D",removeF3dConfirm:'Tem certeza de que deseja remover o arquivo de design do Fusion 360 de "{{name}}"?',removeTimelapse:"Remover Timelapse",removeTimelapseConfirm:'Tem certeza de que deseja remover o vídeo timelapse de "{{name}}"?',timelapse:"{{name}} – Timelapse",selectTimelapse:"Selecionar Timelapse",selectTimelapseDesc:"Nenhuma correspondência automática encontrada. Selecione o timelapse para esta impressão:",deleteArchives:"Excluir Arquivos",deleteArchivesConfirm:"Tem certeza de que deseja excluir {{count}} arquivo(s)? Esta ação não pode ser desfeita.",deleteCount:"Excluir {{count}}"},page:{title:"Arquivos",printsCount:"{{filtered}} de {{total}} impressões",dropFilesHere:"Solte arquivos .3mf aqui",releaseToUpload:"Solte para enviar",only3mfSupported:"Apenas arquivos .3mf são suportados",close:"Fechar",selected:"{{count}} selecionado(s)",selectAll:"Selecionar Todos",tags:"Etiquetas",project:"Projeto",favorite:"Favorito",delete:"Excluir",toggledFavorites:"Favoritos alternados para {{count}} arquivo(s)",failedUpdateFavorites:"Falha ao atualizar favoritos",archivesDeleted:"{{count}} arquivo(s) excluído(s)",failedDeleteArchives:"Falha ao excluir arquivos",photoDeleted:"Foto excluída",failedDeletePhoto:"Falha ao excluir foto"},list:{name:"Nome",printer:"Impressora",date:"Data",size:"Tamanho",actions:"Ações",hasTimelapse:"Possui timelapse"},log:{date:"Data",printName:"Nome da Impressão",printer:"Impressora",user:"Usuário",status:"Status",duration:"Duração",filament:"Filamento",allPrinters:"Todas as Impressoras",allUsers:"Todos os Usuários",allStatuses:"Todos os Status",cancelled:"Cancelado",skipped:"Ignorado",dateFrom:"De",dateTo:"Até",noEntries:"Nenhuma entrada de registro de impressão encontrada",showing:"Mostrando {{count}} de {{total}} entradas",rowsPerPage:"Linhas",page:"Página",prev:"Anterior",next:"Próxima",clearLog:"Limpar Registro",clearLogTitle:"Limpar Registro de Impressão",clearLogConfirm:"Todas as entradas do registro de impressão serão permanentemente excluídas. Arquivos e itens da fila não serão afetados. Esta ação não pode ser desfeita. Tem certeza?",clearLogButton:"Limpar Tudo",cleared:"{{count}} entradas do registro de impressão limpas",clearFailed:"Falha ao limpar o registro de impressão"}},queue:{filamentShort:{rowBadge:"Filamento insuficiente para a bobina atribuida",rowTooltip:"O escalonador sinalizou este item. Clique em Play para ver o deficit por slot e decidir se quer imprimir mesmo assim.",confirmTitle:"Filamento insuficiente",confirmIntro:"A bobina atribuida nao pode cobrir pelo menos um slot. Imprimir mesmo assim?",lineItem:"Slot {{slot}}: precisa de {{required}} g, restam {{remaining}} g",unknown:"desconhecido",printAnyway:"Imprimir mesmo assim"},title:"Fila de Impressão",subtitle:"Agende e gerencie seus trabalhos de impressão",addToQueue:"Adicionar à Fila",print:"Imprimir",reprint:"Reimprimir",schedulePrint:"Agendar Impressão",editQueueItem:"Editar Item da Fila",printToPrinters:"Imprimir para {{count}} Impressoras",queueToPrinters:"Adicionar à Fila para {{count}} Impressoras",queueSelectedPlates:"Adicionar {{count}} placas à fila",selectAllPlates:"Selecionar todas as {{count}} placas",deselectAll:"Desmarcar tudo",printQueued:"Impressão adicionada à fila",itemsQueued:"{{count}} itens adicionados à fila",sending:"Enviando...",sendingProgress:"Enviando {{current}}/{{total}}...",adding:"Adicionando...",addingProgress:"Adicionando {{current}}/{{total}}...",savingProgress:"Salvando {{current}}/{{total}}...",clearQueue:"Limpar Fila",clearHistory:"Limpar Histórico",emptyQueue:"Fila vazia",position:"Posição",scheduledTime:"Hora Agendada",moveUp:"Mover para Cima",moveDown:"Mover para Baixo",startNow:"Iniciar Agora",printingInProgress:"Impressão em andamento...",viewArchive:"Ver Arquivo",viewInFileManager:"Ver no Gerenciador de Arquivos",itemCount:"{{count}} item",itemCount_plural:"{{count}} itens",dragToReorder:"Arraste para reordenar (apenas ASAP)",reorderHint:"A posição afeta apenas itens ASAP. Itens agendados são executados no horário definido.",sjf:{label:"SJF",tooltip:"Trabalho mais curto primeiro — o agendador prioriza impressões mais curtas"},addedBy:"Adicionado por {{name}}",nextInQueue:"Próximo na fila",clearPlateSuccess:"Placa limpa — pronta para a próxima impressão",plateNumber:"Placa {{index}}",quantity:"Quantidade",quantityHint:"Cria {{count}} itens na fila",activeBatches:"Lotes ativos",batchProgress:"{{completed}} de {{total}} concluídos",cancelBatch:"Cancelar restantes",batchCancelled:"Itens restantes do lote cancelados",cancelBatchConfirmTitle:"Cancelar lote",cancelBatchConfirmMessage:"Cancelar todos os itens pendentes restantes neste lote?",batch:"Lote",sections:{currentlyPrinting:"Imprimindo Atualmente",queued:"Na Fila",history:"Histórico"},status:{pending:"Pendente",waiting:"Aguardando",printing:"Imprimindo",paused:"Pausado",completed:"Concluído",failed:"Falhou",skipped:"Ignorado",cancelled:"Cancelado"},summary:{printing:"Imprimindo",queued:"Na Fila",totalTime:"Tempo Total da Fila",totalWeight:"Peso Total da Fila",history:"Histórico"},filter:{allPrinters:"Todas as Impressoras",unassigned:"Não Atribuído",allStatus:"Todos os Status",allLocations:"Todos os Locais",any:"Qualquer"},sort:{byPosition:"Ordenar por Posição",byName:"Ordenar por Nome",byPrinter:"Ordenar por Impressora",bySchedule:"Ordenar por Agendamento",byDate:"Ordenar por Data",ascendingOldest:"Crescente (mais antigo primeiro)",descendingNewest:"Decrescente (mais recente primeiro)"},badges:{staged:"Preparado (início manual)",requiresPrevious:"Requer sucesso anterior",autoPowerOff:"Desligamento automático",gcodeInjection:"G-code"},empty:{title:"Nenhuma impressão agendada",description:'Agende uma impressão a partir da página de Arquivos usando a opção "Agendar" no menu de contexto, ou arraste e solte arquivos para começar.'},time:{asap:"ASAP",overdue:"Atrasado",now:"Agora",lessThanMinute:"Em menos de um minuto",inMinutes:"Em {{count}} min",inHours:"Em {{count}} horas"},actions:{stopPrint:"Parar Impressão",startPrint:"Iniciar Impressão",requeue:"Reenfileirar"},bulkEdit:{title:"Editar {{count}} Item",title_plural:"Editar {{count}} Itens",description:"Apenas as configurações alteradas serão aplicadas aos itens selecionados.",printer:"Impressora",noChange:"— Sem alterações —",queueOptions:"Opções de Fila",staged:"Preparado (início manual)",autoPowerOff:"Desligamento automático após impressão",requirePrevious:"Requer sucesso anterior",printOptions:"Opções de Impressão",bedLevelling:"Nivelamento da Mesa",flowCalibration:"Calibração de Fluxo",vibrationCalibration:"Calibração de Vibração",layerInspection:"Inspeção da Primeira Camada",timelapse:"Timelapse",useAms:"Usar AMS",applyChanges:"Aplicar Alterações",selectAll:"Selecionar Todos",deselectAll:"Desmarcar Todos",selected:"{{count}} selecionado(s)",editSelected:"Editar Selecionados",cancelSelected:"Cancelar Selecionados"},confirm:{cancelTitle:"Cancelar Impressão Agendada",cancelMessage:'Tem certeza de que deseja cancelar "{{name}}"?',stopTitle:"Parar Impressão",stopMessage:'Tem certeza de que deseja parar a impressão atual "{{name}}"? Isso cancelará o trabalho de impressão na impressora.',removeTitle:"Remover do Histórico",removeMessage:'Tem certeza de que deseja remover "{{name}}" do histórico da fila?',clearHistoryTitle:"Limpar Histórico",clearHistoryMessage:"Tem certeza de que deseja remover todos os {{count}} itens do histórico?",cancelButton:"Cancelar Impressão",stopButton:"Parar Impressão",thisPrint:"esta impressão",thisItem:"este item"},toast:{cancelled:"Item da fila cancelado",cancelFailed:"Falha ao cancelar item",removed:"Item da fila removido",removeFailed:"Falha ao remover item",stopped:"Impressão parada",stopFailed:"Falha ao parar impressão",released:"Impressão liberada para a fila",startFailed:"Falha ao iniciar impressão",reorderFailed:"Falha ao reordenar fila",historyCleared:"Limpar {{count}} item(s) do histórico",clearHistoryFailed:"Falha ao limpar histórico",updateFailed:"Falha ao atualizar itens",bulkCancelled:"Cancelado {{count}} item(s)",bulkCancelFailed:"Falha ao cancelar itens"},timeline:{listView:"Lista",timelineView:"Linha do tempo",unassigned:"Não atribuído",noData:"Nenhuma impressão agendada para este dia",allDoneBy:"Todas as impressões concluídas até {{time}}",staged:"Preparado",filterAll:"Mostrar tudo",filterPrinting:"Imprimindo",filterQueued:"Na fila",time:{anyMoment:"a qualquer momento",minutesLeft:"{{minutes}}m restantes",hoursLeft:"{{hours}}h restantes",hoursMinutesLeft:"{{hours}}h {{minutes}}m restantes"},day:{previous:"Dia anterior",next:"Próximo dia",today:"Hoje"}},permissions:{noStopPrint:"Você não tem permissão para parar impressões",noStartPrint:"Você não tem permissão para iniciar impressões",noEdit:"Você não tem permissão para editar este item da fila",noCancel:"Você não tem permissão para cancelar este item da fila",noRequeue:"Você não tem permissão para reenfileirar itens",noRemove:"Você não tem permissão para remover este item da fila",noClearHistory:"Você não tem permissão para limpar todo o histórico",noEditItems:"Você não tem permissão para editar itens da fila",noCancelItems:"Você não tem permissão para cancelar itens da fila"}},backgroundDispatch:{unknownFile:"Arquivo desconhecido",unknownPrinter:"Impressora desconhecida",startingPrints:"Iniciando impressões",progressSummary:"{{complete}}/{{total}} concluídos • Despachados: {{dispatched}} • Processando: {{processing}}",expandDetails:"Expand dispatch details",collapseDetails:"Collapse dispatch details",dismissToast:"Dispensar notificação de despacho",cancelDispatchJob:"Cancelar despacho",cancel:"Cancelar",cancelling:"Cancelando…",awaitingPrinter:"Aguardando impressora…",status:{dispatched:"Despachado",processing:"Processando",completed:"Concluído",failed:"Falhou",cancelled:"Cancelado"},toast:{cancellingUpload:"Cancelling upload...",cancelled:"Despacho cancelado",cancelFailed:"Falha ao cancelar despacho",completeWithFailures:"Despacho em segundo plano concluído: {{completed}} sucesso(s), {{failed}} falha(s)",completeSuccess:"Despacho em segundo plano concluído: {{completed}} sucesso(s)",printStartedRemaining:"{{completed}} impressão(ões) iniciada(s), {{remaining}} enviando..."}},stats:{title:"Estatísticas",subtitle:"Arraste os widgets para reorganizar. Clique no ícone de olho para ocultar.",overview:"Visão Geral",totalPrints:"Total de Impressões",successRate:"Taxa de Sucesso",totalPrintTime:"Tempo Total de Impressão",printTime:"Tempo de Impressão",totalFilament:"Filamento Total Utilizado",filamentUsed:"Filamento Utilizado",filamentCost:"Custo do Filamento",totalCost:"Custo Total",energyUsed:"Energia Utilizada",energyCost:"Custo da Energia",energyWarmingUpTooltip:"O monitoramento de energia ainda está coletando snapshots por hora. Os totais por período ficarão precisos quando houver pelo menos um snapshot antes do intervalo selecionado. Valores iniciais podem ser subestimados.",averagePrintTime:"Tempo Médio de Impressão",printsPerDay:"Impressões por Dia",byPrinter:"Por Impressora",printsByPrinter:"Impressões por Impressora",byMaterial:"Por Material",byMonth:"Por Mês",last7Days:"Últimos 7 Dias",last30Days:"Últimos 30 Dias",last90Days:"Últimos 90 Dias",allTime:"Todo o Tempo",quickStats:"Estatísticas Rápidas",printActivity:"Atividade de Impressão",filamentTypes:"Tipos de Filamento",filamentTrends:"Tendências de Filamento",failureAnalysis:"Análise de Falhas",timeAccuracy:"Precisão do Tempo",successful:"Bem-sucedido:",failed:"Falhou:",cancelled:"Cancelado:",perfectEstimate:"100% = estimativa perfeita",noTimeAccuracyData:"Nenhum dado de precisão de tempo disponível",noFilamentData:"Nenhum dado de filamento disponível",noPrinterData:"Nenhum dado de impressora disponível",noPrintData:"Nenhum dado de impressão disponível",noPrintDataLast30Days:"Nenhum dado de impressão nos últimos 30 dias",failureReasons:"Razões de Falha",topFailureReasons:"Principais Razões de Falha",failedPrintsCount:"{{failed}} / {{total}} impressões falharam",lastWeekRate:"Última semana: {{rate}}%",resetLayout:"Redefinir Layout",recalculateCosts:"Recalcular Custos",recalculateCostsHint:"Recalcular todos os custos do arquivo usando os preços atuais do filamento",exportStats:"Exportar Estatísticas",exportAsCsv:"Exportar como CSV",exportAsExcel:"Exportar como Excel",hiddenCount:"{{count}} Oculto",exportDownloaded:"Exportação baixada",exportFailed:"Falha na exportação",layoutReset:"Layout redefinido",recalculatedCosts:"Custos recalculados para {{count}} arquivos",recalculateFailed:"Falha ao recalcular custos",loadingStats:"Carregando estatísticas...",noPermissionResetLayout:"Você não tem permissão para redefinir o layout",noPermissionRecalculate:"Você não tem permissão para recalcular custos",noPrintDataInRange:"Sem dados no período selecionado",periodFilament:"Filamento usado",periodCost:"Custo",avgPerPrint:"Média por impressão",usageOverTime:"Uso ao longo do tempo",filamentByWeight:"Peso",printDuration:"Duração da impressão",printerUtilization:"Utilização da impressora",filamentSuccess:"Sucesso por material",printHabits:"Hábitos de impressão",printTimeOfDay:"Horário de impressão",colorDistribution:"Distribuição de cores",noColorData:"Nenhum dado de cor disponível",records:"Recordes",longestPrint:"Impressão mais longa",heaviestPrint:"Impressão mais pesada",mostExpensivePrint:"Mais cara",busiestDay:"Dia mais movimentado",successStreak:"Sequência de sucesso",streakPrint:"impressão consecutiva",streakPrints:"{{count}} impressões consecutivas",printerStats:"Estatísticas da impressora",hours:"horas",avgPrints:"Méd. impressões",noArchiveData:"Nenhum dado de impressão disponível",filamentByTime:"Tempo",avgWeight:"Méd. peso",avgTime:"Méd. tempo",filamentByPrints:"Impressões",timeframe:{today:"Hoje","this-week":"Esta semana","this-month":"Este mês","last-7":"Últimos 7 dias","last-30":"Últimos 30 dias","last-90":"Últimos 90 dias","this-year":"Este ano","all-time":"Todo o período",custom:"Personalizado",from:"De",to:"Até"},allUsers:"Todos os Usuários",noUser:"Sem Usuário (Sistema)",filterByUser:"Filtrar por Usuário"},maintenance:{title:"Manutenção",overview:"Visão Geral",allOk:"Todas as manutenções estão em dia",dueCount:"{{count}} item pendente",dueCount_plural:"{{count}} itens pendentes",warningCount:"{{count}} aviso",warningCount_plural:"{{count}} avisos",totalPrintTime:"Tempo Total de Impressão",nextMaintenance:"Próxima Manutenção",nothingDue:"Nada pendente",tasks:"Tarefas",lastPerformed:"Última execução",interval:"Intervalo",hoursRemaining:"{{hours}}h restantes",hoursOverdue:"{{hours}}h atrasadas",markDone:"Marcar como Concluída",performMaintenance:"Realizar Manutenção",history:"Histórico",noHistory:"Nenhum histórico de manutenção",editPrintHours:"Editar Horas de Impressão",currentHours:"Horas Atuais",statusTab:"Status",settingsTab:"Configurações",overdueCount:"{{count}} atrasado",dueSoonCount:"{{count}} prestes a vencer",dueSoon:"Prestes a vencer",allGood:"Tudo certo",overdueBy:"Atrasado por {{duration}}",dueIn:"Vence em {{duration}}",timeLeft:"{{duration}} restantes",day:"1 dia",days:"{{count}} dias",week:"1 semana",weeks:"{{count}} semanas",month:"1 mês",months:"{{count}} meses",year:"1 ano",maintenanceTypes:"Tipos de Manutenção",maintenanceTypesDescription:"Tipos de sistema e suas tarefas de manutenção personalizadas",addCustomType:"Adicionar Tipo Personalizado",restoreDefaults:"Restaurar Tarefas Padrão",intervalType:"Tipo de Intervalo",intervalValue:"Intervalo ({{type}})",icon:"Ícone",documentationLink:"Link da Documentação (opcional)",assignToPrinters:"Atribuir a Impressoras",selectAtLeastOnePrinter:"Selecione pelo menos uma impressora",addType:"Adicionar Tipo",custom:"Personalizado",printHours:"Horas de Impressão",calendarDays:"Dias de Calendário",exampleName:"ex., Substituir Filtro HEPA",viewDocumentation:"Ver documentação",timeBasedInterval:"Intervalo baseado em tempo",intervalOverrides:"Substituições de Intervalo",intervalOverridesDescription:"Personalize os intervalos para impressoras específicas",assignedToPrinters:"Atribuído a impressoras:",noPrintersAssigned:"Nenhuma impressora atribuída",addPrinterShort:"Adicionar:",printersAssignedClick:"{{count}} impressora(s) atribuída(s) - clique para gerenciar",removeFromPrinter:"Remover desta impressora",types:{lubricateCarbonRods:"Lubricar Barras de Carbono",lubricateRails:"Lubricar Trilhos Lineares",cleanNozzle:"Limpar Bico/Hotend",checkBelts:"Verificar Tensão das Correias",cleanBuildPlate:"Limpar Plataforma de Impressão",checkExtruder:"Verificar Engrenagens do Extrusor",checkCooling:"Verificar Ventiladores de Resfriamento",generalInspection:"Inspeção Geral",cleanCarbonRods:"Limpar Barras de Carbono",lubricateSteelRods:"Lubrificar Barras de Aço",cleanSteelRods:"Limpar Barras de Aço",cleanLinearRails:"Limpar Trilhos Lineares",checkPtfeTube:"Verificar Tubo PTFE",replaceHepaFilter:"Substituir Filtro HEPA",replaceCarbonFilter:"Substituir Filtro de Carbono",lubricateLeftNozzleRail:"Lubrificar Trilho do Bico Esquerdo"},maintenanceComplete:"Manutenção marcada como concluída",typeUpdated:"Tipo de manutenção atualizado",typeDeleted:"Tipo de manutenção excluído",defaultsRestored:"Restauradas {{count}} tarefa(s) padrão",printHoursUpdated:"Horas de impressão atualizadas",printerAssigned:"Impressora atribuída",printerRemoved:"Impressora removida",deleteTypeConfirm:'Excluir "{{name}}"?',deleteSystemTypeTitle:"Excluir tarefa de manutenção padrão?",deleteSystemTypeMessage:'Tem certeza de que deseja excluir a tarefa de manutenção padrão "{{name}}"?',noPermissionUpdate:"Você não tem permissão para atualizar itens de manutenção",noPermissionPerform:"Você não tem permissão para realizar manutenção",noPermissionEditTypes:"Você não tem permissão para editar tipos de manutenção",noPermissionDeleteTypes:"Você não tem permissão para excluir tipos de manutenção",noPermissionEditHours:"Você não tem permissão para editar horas de impressão",noPermissionRemovePrinter:"Você não tem permissão para remover atribuições de impressora",noPermissionAssignPrinter:"Você não tem permissão para atribuir impressoras",noPermissionEditIntervals:"Você não tem permissão para editar intervalos",configureSettings:"Configure tipos de manutenção e intervalos"},settings:{title:"Configurações",general:"Geral",tabs:{general:"Geral",smartPlugs:"Tomadas Inteligentes",notifications:"Notificações",queue:"Fluxo",filament:"Filamento",network:"Rede",apiKeys:"Chaves API",virtualPrinter:"Impressora Virtual",failureDetection:"Detecção de Falhas",users:"Autenticação",backup:"Backup",emailAuth:"Autenticação por Email",ldap:"LDAP",twoFa:"Autenticação 2FA",oidc:"SSO / OIDC",security:"Segurança",spoolbuddy:"SpoolBuddy"},ldap:{title:"Autenticação LDAP",enabledDesc:"A autenticação LDAP está ativada",disabledDesc:"A autenticação LDAP está desativada",disabledHint:"Configure e salve as configurações LDAP abaixo, depois ative.",enabled:"Autenticação LDAP ativada",disabled:"Autenticação LDAP desativada",feature1:"Usuários podem fazer login com credenciais LDAP",feature2:"A conta de administrador local permanece como fallback",feature3:"Grupos LDAP são mapeados para grupos BamBuddy no login",serverConfig:"Configuração do Servidor LDAP",serverUrl:"URL do servidor",serverUrlHint:"Use ldap:// para padrão ou ldaps:// para conexões SSL",security:"Segurança",securityHint:"StartTLS atualiza uma conexão simples para TLS. LDAPS usa TLS desde o início.",bindDn:"Bind DN (conta de serviço)",bindPassword:"Senha Bind",searchBase:"Base DN de pesquisa",userFilter:"Filtro de pesquisa de usuário",userFilterHint:"{username} é substituído pelo nome de usuário. Use (uid={username}) para OpenLDAP.",advanced:"Avançado",autoProvision:"Provisionamento automático de usuários",autoProvisionHint:"Criar automaticamente uma conta BamBuddy no primeiro login LDAP",defaultGroup:"Grupo padrão",defaultGroupNone:"— Nenhum (sem fallback) —",defaultGroupHint:"Grupo de fallback atribuído quando um usuário LDAP se autentica mas não está em nenhum grupo LDAP mapeado. Deixe vazio para manter usuários não mapeados sem permissões.",groupMapping:"Mapeamento de grupos (JSON)",groupMappingHint:"Mapear DNs de grupos LDAP para grupos BamBuddy. Grupos disponíveis: ",testConnection:"Testar conexão",settingsSaved:"Configurações LDAP salvas",errors:{serverRequired:"URL do servidor LDAP é obrigatória",searchBaseRequired:"Base DN de pesquisa é obrigatória",enableAuthFirst:"Ative a autenticação primeiro",configureLdapFirst:"Salve as configurações LDAP primeiro"}},email:{smtpSettings:"Configuração SMTP",smtpHost:"Servidor SMTP",smtpPort:"Porta SMTP",security:"Segurança",authentication:"Autenticação",username:"Nome de Usuário",password:"Senha",fromEmail:"Email de Remetente",fromName:"Nome de Remetente",testConnection:"Testar Conexão SMTP",testRecipient:"Email de Teste",sendTest:"Enviar Email de Teste",sending:"Enviando...",save:"Salvar Configurações",saving:"Salvando...",advancedAuth:"Autenticação Avançada",advancedAuthEnabled:"Autenticação Avançada está habilitada",advancedAuthEnabledDesc:"Recursos de gerenciamento de usuários baseados em email estão ativos. Novos usuários receberão senhas geradas automaticamente por email, e os usuários podem redefinir suas senhas através do recurso de esqueci minha senha.",advancedAuthDisabled:"Autenticação Avançada está desabilitada",advancedAuthDisabledDesc:"Habilite a autenticação avançada para ativar recursos baseados em email para gerenciamento de usuários.",enable:"Habilitar",disable:"Desabilitar",feature1:"Senhas são geradas automaticamente e enviadas por email para novos usuários",feature2:"Usuários podem fazer login com nome de usuário ou email",feature3:"Recurso de esqueci minha senha está disponível",feature4:"Administradores podem redefinir senhas de usuários via email",errors:{requiredFields:"Por favor, preencha todos os campos obrigatórios",usernameRequired:"Nome de usuário é obrigatório quando a autenticação está habilitada",enterTestEmail:"Por favor, insira um endereço de email de teste",smtpServerAndEmail:"Por favor, preencha o servidor SMTP e o email de remetente antes de testar",usernamePasswordRequired:"Nome de usuário e senha são obrigatórios quando a autenticação está habilitada",configureSmtpFirst:"Por favor, configure e teste as configurações SMTP primeiro",enableAuthFirst:"Por favor, habilite a autenticação primeiro para usar os recursos baseados em e-mail."},success:{settingsSaved:"Configurações SMTP salvas com sucesso"},securityOptions:{starttls:"STARTTLS (Porta 587)",ssl:"SSL/TLS (Porta 465)",none:"Nenhuma (Porta 25)"},authOptions:{enabled:"Habilitado",disabled:"Desabilitado"}},appearance:"Aparência",notifications:"Notificações",smartPlugs:"Tomadas Inteligentes",spoolman:"Spoolman",updates:"Atualizações",language:"Idioma",languageDescription:"Selecione seu idioma preferido",theme:"Tema",themeLight:"Claro",themeDark:"Escuro",themeSystem:"Sistema",defaultView:"Visualização Padrão",defaultViewDescription:"Página a ser exibida ao abrir o aplicativo",checkForUpdates:"Verificar Atualizações",autoUpdate:"Atualização Automática",currentVersion:"Versão Atual",latestVersion:"Última Versão",upToDate:"Você está atualizado",updateAvailable:"Atualização disponível",notificationLanguage:"Idioma das Notificações",notificationLanguageDescription:"Idioma para notificações push",bedCooledThreshold:"Limite de Resfriamento da Cama",bedCooledThresholdDescription:"Temperatura abaixo da qual a cama é considerada resfriada após uma impressão",userNotificationsEnabled:"Notificações do Usuário",userNotificationsEnabledDescription:"Ativa o menu de notificações do usuário e notificações por e-mail para eventos de impressão. Requer Autenticação Avançada.",userNotificationsDisabledHint:"Ative a Autenticação Avançada para usar as notificações do usuário.",notificationProviders:"Provedores de Notificação",addProvider:"Adicionar Provedor",editProvider:"Editar Provedor",providerType:"Tipo de Provedor",testNotification:"Testar Notificação",testSuccess:"Notificação de teste enviada com sucesso",testFailed:"Falha ao enviar notificação de teste",quietHours:"Horas de Silêncio",quietHoursDescription:"Não perturbe durante essas horas",quietHoursStart:"Início",quietHoursEnd:"Fim",events:{title:"Eventos de Notificação",printStart:"Impressão Iniciada",printComplete:"Impressão Concluída",printFailed:"Falha na Impressão",printStopped:"Impressão Interrompida",printProgress:"Marcos de Progresso",printProgressDescription:"Notificar em 25%, 50%, 75%",printerOffline:"Impressora Offline",printerError:"Erro na Impressora",filamentLow:"Filamento Baixo",maintenanceDue:"Manutenção Pendente",maintenanceDueDescription:"Notificar quando a manutenção for necessária"},smartPlug:{title:"Tomadas Inteligentes",add:"Adicionar Tomada Inteligente",edit:"Editar Tomada Inteligente",name:"Nome",ipAddress:"Endereço IP",linkedPrinter:"Impressora Vinculada",autoOn:"Ligar Automaticamente",autoOnDescription:"Ligar quando a impressão começar",autoOff:"Desligar Automaticamente",autoOffDescription:"Desligar após a conclusão da impressão",offDelay:"Atraso para Desligar",offDelayMinutes:"Minutos após a impressão",offDelayTemp:"Quando o bico estiver abaixo da temperatura",currentState:"Estado Atual",turnOn:"Ligar",turnOff:"Desligar"},filamentTracking:"Rastreamento de Filamento",filamentTrackingDesc:"Escolha como rastrear seus rolos de filamento. Você pode usar o inventário interno ou conectar a um servidor Spoolman externo.",filamentChecks:"Verificações de filamento",disableFilamentWarnings:"Desativar avisos de filamento",disableFilamentWarningsDesc:"Não mostrar avisos sobre filamento insuficiente ao imprimir ou adicionar à fila",preferLowestFilament:"Preferir filamento com menor resto",preferLowestFilamentDesc:"Quando vários carretéis correspondem, usar o com menos filamento restante",trackingModeBuiltIn:"Inventário Interno",trackingModeBuiltInDesc:"Correspondência automática de RFID e rastreamento de uso incluídos",trackingModeSpoolmanDesc:"Servidor de gerenciamento de filamento externo",builtInFeatureRfid:"Detecta automaticamente rolos RFID da Bambu Lab no AMS",builtInFeatureUsage:"Rastreia o consumo de filamento por impressão",builtInFeatureCatalog:"Gerencia rolos, cores e perfis de fator K",builtInFeatureThirdParty:"Rolos de terceiros podem ser atribuídos aos rolos do inventário",amsSyncButton:"Sincronizar Pesos do AMS",amsSyncTitle:"Sincronizar Pesos dos Rolos do AMS",amsSyncMessage:"Isso substituirá todos os pesos dos rolos do inventário pelos valores atuais de % restante do AMS das impressoras conectadas. Use isso para recuperar dados de peso corrompidos. As impressoras devem estar online.",amsSyncing:"Sincronizando...",amsSyncSuccess:"{{synced}} rolo(s) sincronizado(s), {{skipped}} ignorado(s)",amsSyncError:"Falha ao sincronizar pesos do AMS",spoolmanAmsSyncButton:"Sincronizar pesos do Spoolman pelo AMS",spoolmanAmsSyncTitle:"Sincronizar pesos dos rolos Spoolman pelo AMS",spoolmanAmsSyncMessage:"Isso atualizará os pesos de todos os rolos Spoolman com base nos valores atuais de % restante do AMS das impressoras conectadas. As impressoras devem estar online.",spoolmanAmsSyncing:"Sincronizando...",spoolmanAmsSyncSuccess:"{{synced}} rolo(s) Spoolman sincronizado(s), {{skipped}} ignorado(s)",spoolmanAmsSyncError:"Falha ao sincronizar pesos do Spoolman pelo AMS",spoolmanAmsSyncErrorUnreachable:"Falha na sincronização (Spoolman inacessível)",spoolmanAmsSyncErrorNotConfigured:"Falha na sincronização (Spoolman não configurado)",spoolmanNotConfigured:"Spoolman não configurado",spoolmanFilamentCatalogTitle:"Catálogo de filamentos Spoolman",spoolmanFilamentCatalogDesc:"Nomes de filamentos e pesos tara da sua instância Spoolman. Nome e peso do carretel são editáveis aqui; todas as outras propriedades são gerenciadas diretamente no Spoolman.",spoolmanUrl:"Spoolman URL",spoolmanUrlHint:"URL do seu servidor Spoolman (por exemplo, http://localhost:7912)",spoolmanConnected:"Conectado",spoolmanDisconnected:"Desconectado",status:"Status",connect:"Conectar",disconnect:"Desconectar",howSyncWorks:"Como a Sincronização Funciona",syncInfoRfidOnly:"Apenas rolos oficiais da Bambu Lab com RFID são sincronizados",syncInfoAutoCreate:"Novos rolos são criados automaticamente no Spoolman na primeira sincronização",syncInfoThirdPartySkipped:"Rolos não oficiais da Bambu Lab (terceiros, reabastecidos) são ignorados",linkingExistingSpools:"Vinculando Rolos Existentes",linkingExistingSpoolsDesc:'Para vincular rolos existentes do Spoolman ao seu AMS, passe o mouse sobre um slot do AMS e clique em "Vincular ao Spoolman".',syncMode:"Modo de Sincronização",syncModeAuto:"Automático",syncModeManual:"Apenas Manual",syncModeAutoDesc:"Os dados do AMS são sincronizados automaticamente quando alterações são detectadas",syncModeManualDesc:"Somente sincronize quando acionado manualmente",syncAmsData:"Sincronizar Dados do AMS",syncAmsDataDesc:"Sincronize manualmente os dados do AMS da impressora com o Spoolman",allPrinters:"Todas as Impressoras",noDefaultPrinter:"Sem padrão (perguntar a cada vez)",sidebarOrder:"Ordem da barra lateral",saveThumbnails:"Salvar miniaturas",captureFinishPhoto:"Capturar foto de conclusão",noPrintersConfigured:"Nenhuma impressora configurada",archiveMode:{always:"Sempre criar entrada de arquivo",never:"Nunca criar entrada de arquivo",ask:"Perguntar a cada vez"},checkForUpdatesLabel:"Verificar atualizações",checkPrinterFirmware:"Verificar firmware da impressora",includeBetaUpdates:"Incluir versões beta",includeBetaUpdatesDesc:"Notificar sobre versões beta e pré-lançamento ao verificar atualizações",enableRetry:"Habilitar tentativa",homeAssistantDescription:"Controlar tomadas inteligentes via Home Assistant",environmentManagedLabel:"(Gerenciado pelo Ambiente)",autoEnabledViaEnv:"Habilitado automaticamente via variáveis de ambiente",urlFromEnvReadOnly:"Valor definido pela variável de ambiente HA_URL (somente leitura)",tokenFromEnvReadOnly:"Valor definido pela variável de ambiente HA_TOKEN (somente leitura)",mqttConnectedTo:"Conectado a",prometheusDescription:"Expor dados da impressora no formato Prometheus",noSmartPlugsTitle:"Nenhuma tomada inteligente configurada",noSmartPlugsDescription:"Adicione uma tomada inteligente baseada em Tasmota para monitorar o consumo de energia e automatizar o controle de energia.",noProvidersTitle:"Nenhum provedor configurado",noProvidersDescription:"Adicione um provedor para receber alertas.",noTemplatesAvailable:"Nenhum modelo disponível. Reinicie o backend para gerar os modelos padrão.",apiPermissionView:"Visualizar status da impressora e fila",apiPermissionEdit:"Adicionar e remover itens da fila de impressão",apiKeysEmptyTitle:"Nenhuma chave API",apiKeysEmptyDescription:"Crie uma chave API para integrar com serviços externos.",noUsersFound:"Nenhum usuário encontrado",noGroupsFound:"Nenhum grupo encontrado",noGroupsAvailable:"Nenhum grupo disponível",passwordsDoNotMatch:"As senhas não coincidem",systemGroupWarning:"Os nomes dos grupos do sistema não podem ser alterados",authDisabledTitle:"Autenticação Desativada",authDisabledFeature1:"Exigir login para acessar o sistema",authDisabledFeature2:"Criar múltiplos usuários com permissões baseadas em grupos",authDisabledFeature3:"Controlar acesso com mais de 50 permissões granulares",userHasCreated:"Este usuário criou:",userItemsQuestion:"O que você gostaria de fazer com esses itens?",deleteUserConfirm:"Tem certeza de que deseja excluir este usuário?",actionCannotBeUndone:"Esta ação não pode ser desfeita.",addFirstSmartPlug:"Adicione sua primeira tomada inteligente",providers:"Provedores",log:"Registro",testAll:"Testar tudo",testResults:"Resultados do teste",testPassedCount:"{{count}} aprovado",testFailedCount:"{{count}} falhou",messageTemplates:"Modelos de mensagem",messageTemplatesDescription:"Personalize as mensagens de notificação para cada evento.",apiKeys:"Chaves API",apiKeysDescription:"Crie chaves API para integrações externas e webhooks.",createKey:"Criar Chave",apiKeyCreated:"Chave API criada com sucesso",apiKeyCopyWarning:"Copie esta chave agora - ela não será exibida novamente!",useInApiBrowser:"Usar no Navegador API",createNewApiKey:"Criar Nova Chave API",keyName:"Nome da Chave",keyNamePlaceholder:"e.g., Home Assistant, OctoPrint",readStatus:"Status de Leitura",readStatusDescription:"Visualizar status da impressora e fila",manageQueue:"Gerenciar Fila",manageQueueDescription:"Adicionar e remover itens da fila de impressão",controlPrinter:"Controlar Impressora",controlPrinterDescription:"Pausar, retomar e parar impressões",manageLibrary:"Gerenciar biblioteca",manageLibraryDescription:"Enviar, renomear e excluir arquivos da biblioteca; importar modelos do MakerWorld",manageInventory:"Gerenciar estoque",manageInventoryDescription:"Criar, atualizar e excluir bobinas e registros de estoque. Necessário para quiosques SpoolBuddy (escaneamento NFC, leituras da balança, comandos de sistema do quiosque).",libraryBadge:"Biblioteca",inventoryBadge:"Estoque",cloudAccess:"Permitir acesso à nuvem",cloudAccessDescription:"Lê predefinições e filamentos do Bambu Cloud em seu nome. Requer login no Bambu Cloud.",cloudBadge:"Nuvem",updateEnergyCost:"Atualizar preço da eletricidade",updateEnergyCostDescription:"Permitir que esta chave envie POST de um novo preço por kWh para /settings/electricity-price. Útil para automações de tarifa dinâmica do Home Assistant (Tibber, Octopus, etc.). Este é o único campo de configuração gravável via API key.",energyCostBadge:"Energia",legacyKey:"Legado",legacyKeyTooltip:"Criado antes da propriedade por usuário; recrie para acesso à nuvem",unnamedKey:"Chave Sem Nome",lastUsed:"Último uso",read:"Ler",control:"Controlar",createFirstKey:"Crie sua primeira chave",webhookEndpoints:"Endpoints de Webhook",webhookApiKeyHint:"Use sua chave API no cabeçalho X-API-Key.",webhook:{getAllStatus:"Obter status de todas as impressoras",getSpecificStatus:"Obter status de uma impressora específica",addToQueue:"Adicionar à fila de impressão",pausePrint:"Pausar impressão",resumePrint:"Retomar impressão",stopPrint:"Parar impressão"},apiBrowser:"Navegador API",apiBrowserDescription:"Explore e teste todos os endpoints de API disponíveis.",apiKeyForTesting:"Chave API para Teste",apiKeyPlaceholder:"Cole sua chave API aqui para testar endpoints autenticados...",apiKeyHint:"Esta chave será enviada como cabeçalho X-API-Key nas solicitações.",deleteApiKeyTitle:"Excluir Chave API",deleteApiKeyMessage:"Tem certeza de que deseja excluir esta chave API? Quaisquer integrações usando esta chave deixarão de funcionar.",deleteKey:"Excluir Chave",amsDisplayThresholds:"Limiares de Exibição AMS",amsThresholdsDescription:"Configure os limiares de cores para os indicadores de umidade e temperatura do AMS.",humidity:"Umidade",goodGreen:"Bom (verde)",fairOrange:"Razoável (laranja)",aboveFairBad:"Acima do limiar razoável mostra como vermelho (ruim)",fairAlsoDryingThreshold:"Este limiar também é usado para acionar a secagem automática",temperature:"Temperatura",goodBlue:"Bom (azul)",aboveFairHot:"Acima do limiar razoável mostra como vermelho (quente)",historyRetention:"Retenção de Histórico",keepSensorHistory:"Manter histórico do sensor por",historyRetentionDescription:"Dados antigos de umidade e temperatura serão automaticamente excluídos",defaultPrintOptions:"Opções de impressão padrão",defaultPrintOptionsDescription:"Defina valores padrão para opções de impressão. Podem ser alterados no diálogo de impressão.",defaultBedLevelling:"Nivelamento da mesa",defaultBedLevellingDesc:"Nivelar automaticamente a mesa antes da impressão",defaultFlowCali:"Calibração de fluxo",defaultFlowCaliDesc:"Calibrar fluxo de extrusão",defaultVibrationCali:"Calibração de vibração",defaultVibrationCaliDesc:"Reduzir artefatos de ringing",defaultLayerInspect:"Inspeção da primeira camada",defaultLayerInspectDesc:"Inspeção IA da primeira camada",defaultTimelapse:"Timelapse",defaultTimelapseDesc:"Gravar vídeo timelapse",staggeredStart:"Início escalonado",staggeredStartDescription:"Tamanho de grupo e intervalo padrão ao escalonar inícios de lotes multi-impressora. Pode ser sobrescrito por lote no modal de impressão.",plateClear:"Confirmação de placa livre",requirePlateClear:"Exigir confirmação de placa livre",requirePlateClearDescription:'Quando ativado, o agendador aguarda uma confirmação de placa livre por impressora antes de iniciar impressões na fila em impressoras com trabalhos concluídos. Desativar isso também oculta o indicador de status da placa e o botão "Marcar placa como liberada" nos cartões das impressoras.',gcodeInjection:"Injeção de G-code",gcodeInjectionDescription:'Configure G-code personalizado para injetar no início e/ou no final das impressões para sistemas de impressão automática como Farmloop, SwapMod, AutoClear e Printflow 3D. Os snippets são configurados por modelo de impressora e aplicados quando "Injetar G-code" está ativado em um item da fila.',gcodeInjectionNoPrinters:"Nenhuma impressora encontrada. Adicione impressoras para configurar snippets de G-code.",gcodeStartLabel:"G-code inicial",gcodeEndLabel:"G-code final",gcodeStartPlaceholder:"G-code inserido antes do início da impressão...",gcodeEndPlaceholder:"G-code adicionado após o término da impressão...",staggerGroupSize:"Tamanho do grupo",staggerGroupSizeHelp:"Impressoras para iniciar simultaneamente por grupo",staggerInterval:"Intervalo (minutos)",staggerIntervalHelp:"Atraso entre o início de cada grupo",queueDrying:"Secagem Automática",queueDryingDescription:"Secar automaticamente o filamento AMS quando a impressora estiver ociosa entre impressões na fila. Usa o limite de umidade acima.",queueDryingEnabled:"Ativar secagem automática",queueDryingEnabledDescription:"Iniciar secagem AMS automaticamente quando a impressora estiver ociosa e a umidade estiver acima do limite",queueDryingBlock:"Aguardar conclusão da secagem",queueDryingBlockDescription:"Bloquear a fila de impressão até a secagem terminar. Quando desativado, impressões têm prioridade.",ambientDryingEnabled:"Secagem ambiente",ambientDryingEnabledDescription:"Secar automaticamente o filamento em impressoras ociosas quando a umidade exceder o limite, mesmo sem impressões na fila.",dryingPresets:"Predefinições de secagem",dryingPresetsDescription:"Temperatura e duração por tipo de filamento. AMS 2 Pro usa temperaturas mais baixas, AMS-HT suporta temperaturas mais altas.",dryingFilament:"Filamento",printModal:"Modal de Impressão",expandCustomMapping:"Expandir mapeamento personalizado por padrão",expandCustomMappingDescription:"Ao imprimir em várias impressoras, mostrar o mapeamento AMS por impressora expandido",authentication:"Autenticação",authEnabledDescription:"Sua instância está protegida com autenticação de usuário",authDisabledDescription:"Ative para exigir login e gerenciar o acesso dos usuários",authDisabledMessage:"Ative a autenticação para criar contas de usuário, gerenciar permissões e proteger sua instância do Bambuddy.",enableAuthentication:"Ativar Autenticação",currentUser:"Usuário Atual",changePassword:"Alterar Senha",admin:"Administrador",users:"Usuários",addUser:"Adicionar Usuário",groups:"Grupos",addGroup:"Adicionar Grupo",system:"Sistema",noDescription:"Sem descrição",userCount:"{{count}} usuários",permissionCount:"{{count}} permissões",createUser:"Criar Usuário",username:"Nome de Usuário",enterUsername:"Digite o nome de usuário",password:"Senha",enterPassword:"Digite a senha",passwordRequirements:"Pelo menos 8 caracteres, com uma maiúscula, uma minúscula, um dígito e um caractere especial.",confirmPassword:"Confirmar Senha",confirmPasswordPlaceholder:"Confirme a senha",viewReleaseOnGitHub:"Ver lançamento no GitHub",turnAllPlugsOn:"Ligar todas as tomadas",turnAllPlugsOff:"Desligar todas as tomadas",clearNotificationLogs:"Limpar Logs de Notificação",clearLogsMessage:"Isso excluirá permanentemente todos os logs de notificação com mais de 30 dias. Esta ação não pode ser desfeita.",clearLogs:"Limpar Logs",resetUiPreferences:"Redefinir Preferências de UI",resetUiPreferencesMessage:"Isso redefinirá todas as preferências de UI para os padrões: ordem da barra lateral, tema, layout do painel, modos de exibição e preferências de classificação. Suas impressoras, arquivos e configurações do servidor NÃO serão afetados. A página será recarregada após a limpeza.",resetPreferences:"Redefinir Preferências",deleteGroupTitle:"Excluir Grupo",deleteGroupMessage:"Tem certeza de que deseja excluir este grupo? Usuários neste grupo perderão essas permissões.",deleteGroup:"Excluir Grupo",disableAuthenticationTitle:"Desativar Autenticação",disableAuthenticationMessage:"Tem certeza de que deseja desativar a autenticação? Isso tornará sua instância do Bambuddy acessível sem login. Todos os usuários permanecerão no banco de dados, mas a autenticação será desativada.",disableAuthentication:"Desativar Autenticação",configureBambuddy:"Configurar Bambuddy",systemDefault:"Padrão do Sistema",archiveSettings:"Configurações de Arquivo",newWindow:"Nova Janela",embeddedOverlay:"Sobreposição Incorporada",preferredSlicer:"Fatiador Preferido",preferredSlicerDescription:"Escolha qual aplicativo de fatiamento abrirá os arquivos",orcaslicerKnownIssuesWarning:"OrcaSlicer 2.3.2 / 2.4.0-dev têm bugs CLI conhecidos que bloqueiam o fatiamento de muitos 3MFs criados pela Bambu — veja issues upstream #12426 (segfault em arquivos multi-extrusor pintados) e #13386 (rejeição de validação estrita de intervalos de parâmetros). Bambu Studio é recomendado até as correções upstream chegarem.",useSlicerApi:"Usar API do fatiador",useSlicerApiDescription:'Quando ativo, as ações "Slice" abrem o modal do fatiador interno e chamam o sidecar slicer-API. Quando inativo (padrão), redirecionam ao fatiador desktop via esquema URI.',slicerCard:"Fatiador",orcaslicerApiUrl:"OrcaSlicer sidecar URL",bambuStudioApiUrl:"Bambu Studio sidecar URL",slicerApiUrlDescription:"URL do contêiner sidecar slicer-API. Deixe em branco para usar SLICER_API_URL / BAMBU_STUDIO_API_URL.",slicerBundles:{title:"Bundles do fatiador",description:'Importe um Printer Preset Bundle (.bbscfg) exportado do BambuStudio (Arquivo → Exportar → Exportar Bundle de Predefinições → "Printer preset bundle"). Após importado, solicitações de fatiamento podem escolher predefinições do bundle por nome sem re-enviar o triplet de perfis JSON.',uploadButton:"Enviar bundle",uploading:"Enviando…",loading:"Carregando bundles…",empty:"Nenhum bundle importado ainda.",summary:"{{processCount}} processo · {{filamentCount}} predefinições de filamento",delete:"Excluir",uploadSuccess:"{{name}} importado",uploadError:"Falha ao enviar bundle: {{message}}",deleteSuccess:"Bundle removido",deleteError:"Falha ao excluir bundle: {{message}}",confirmDeleteTitle:"Remover este bundle?",confirmDeleteMessage:'Solicitações de fatiamento referenciando "{{name}}" falharão até o bundle ser reimportado.'},externalCameras:"Câmeras Externas",costTracking:"Rastreamento de Custos",printsOnly:"Apenas Impressões",totalConsumption:"Consumo Total",dataManagement:"Gerenciamento de Dados",storageUsage:"Uso de Armazenamento",storageUsageDescription:"Detalhamento do uso de dados por categoria",storageUsageTotal:"Total",storageUsageErrors:"Erros",storageUsageOtherBreakdown:"Outros (inclui ativos estáticos, scripts e arquivos de configuração)",storageUsageSystem:"Sistema",storageUsageData:"Dados",storageUsageUnavailable:"Informações de uso de armazenamento indisponíveis",clearNotificationLogsDescription:"Excluir logs de notificação com mais de 30 dias",resetUiPreferencesDescription:"Redefinir ordem da barra lateral, tema, modos de exibição e preferências de layout. Impressoras, arquivos e configurações não são afetados.",enableHomeAssistant:"Ativar Home Assistant",enableMqtt:"Ativar MQTT",useTls:"Usar TLS",enableMetricsEndpoint:"Ativar Endpoint de Métricas",availableMetrics:"Métricas Disponíveis",editUser:"Editar Usuário",deleteUserTitle:"Excluir Usuário",groupName:"Nome do Grupo",leaveEmptyForAnonymous:"Deixe vazio para anônimo",leaveEmptyForNoAuth:"Deixe vazio para sem autenticação",enterNewPassword:"Digite a nova senha",confirmNewPassword:"Confirme a nova senha",enterGroupName:"Digite o nome do grupo",enterDescriptionOptional:"Digite a descrição (opcional)",enterCurrentPassword:"Digite a senha atual",enterNewPasswordMin6:"Digite a nova senha (mínimo 6 caracteres)",toast:{keyCopied:"Chave copiada para a área de transferência",copyFailed:"Falha ao copiar a chave",keyAddedToBrowser:"Chave adicionada ao Navegador de API",clearLogsFailed:"Falha ao limpar logs",uiPreferencesReset:"Preferências de UI redefinidas. Atualizando...",authDisabled:"Autenticação desativada com sucesso",authDisableFailed:"Falha ao desativar a autenticação",apiKeyCreated:"Chave de API criada",apiKeyDeleted:"Chave de API excluída",userCreated:"Usuário criado com sucesso",userUpdated:"Usuário atualizado com sucesso",userDeleted:"Usuário excluído com sucesso",groupCreated:"Grupo criado com sucesso",groupUpdated:"Grupo atualizado com sucesso",groupDeleted:"Grupo excluído com sucesso",fillRequiredFields:"Por favor, preencha todos os campos obrigatórios",passwordsDoNotMatch:"As senhas não coincidem",passwordTooShort:"A senha deve ter pelo menos 8 caracteres",passwordNeedsUppercase:"A senha deve conter pelo menos uma letra maiúscula",passwordNeedsLowercase:"A senha deve conter pelo menos uma letra minúscula",passwordNeedsDigit:"A senha deve conter pelo menos um dígito",passwordNeedsSpecial:"A senha deve conter pelo menos um caractere especial",enterGroupName:"Por favor, insira um nome de grupo",settingsSaved:"Configurações salvas",noPermissionUpdate:"Você não tem permissão para alterar as configurações",cameraSettingsSaved:"Configurações da câmera salvas",enterCameraUrl:"Por favor, insira a URL da câmera",passwordChanged:"Senha alterada com sucesso",connectionFailed:"Falha na conexão",testFailed:"Falha no teste",cameraConnected:"Câmera conectada{{resolution}}"},testConnection:"Testar Conexão",catalog:{spoolCatalog:"Catálogo de Carretéis",spoolCatalogDescription:"Pesos de carretéis vazios por marca/tipo. Usado para pesquisa automática de peso ao adicionar carretéis.",searchCatalog:"Pesquisar no catálogo...",addNewEntry:"Adicionar Nova Entrada",namePlaceholder:"Nome (ex.: Bambu Lab - Plástico)",weight:"Peso",type:"Tipo",default:"Padrão",custom:"Personalizado",noMatch:"Nenhuma entrada corresponde à sua pesquisa",empty:"Nenhuma entrada no catálogo",deleteEntry:"Excluir Entrada",deleteConfirm:'Tem certeza de que deseja excluir "{{name}}"?',resetCatalog:"Redefinir Catálogo",resetConfirm:"Redefinir catálogo para os padrões? Isso removerá todas as entradas personalizadas.",loadFailed:"Falha ao carregar o catálogo de carretéis",nameWeightRequired:"Nome e peso são obrigatórios",entryAdded:"Entrada adicionada",addFailed:"Falha ao adicionar entrada",entryUpdated:"Entrada atualizada",updateFailed:"Falha ao atualizar entrada",entryDeleted:"Entrada excluída",deleteFailed:"Falha ao excluir entrada",resetSuccess:"Catálogo redefinido para os padrões",resetFailed:"Falha ao redefinir catálogo",exported:"Exportadas {{count}} entradas",imported:"Importadas {{added}} entradas ({{skipped}} ignoradas)",importFailed:"Falha ao importar: formato JSON inválido",exportTooltip:"Exportar catálogo para JSON",importTooltip:"Importar catálogo de JSON",resetTooltip:"Redefinir para os padrões",selectedCount:"{{count}} selecionados",deleteSelected:"Excluir Selecionados",bulkDeleteConfirm:"Tem certeza de que deseja excluir {{count}} entradas?",bulkDeleted:"{{count}} entradas excluídas",bulkDeleteFailed:"Falha ao excluir entradas",material:"Material",spoolWeight:"Peso do carretel",color:"Cor",updateSpoolWeight:"Atualizar peso do carretel",filamentUpdated:"Filamento atualizado",filamentUpdateFailed:"Falha ao atualizar filamento",filamentUpdateInvalid:"Dados de filamento inválidos",keepExistingSpoolWeight:"Manter peso antigo para carretéis existentes",keepExistingSpoolWeightDesc:"Os carretéis já criados com este tipo de filamento mantêm o peso tara antigo. Novos carretéis usam o valor atualizado.",applyToAllSpools:"Aplicar a todos os carretéis",applyToAllSpoolsDesc:"Todos os cálculos de peso para este tipo de filamento usam imediatamente o novo peso tara."},colorCatalog:{title:"Catálogo de Cores",description:"Cores de filamento por fabricante/material. Usado para pesquisa automática de cores ao adicionar carretéis.",searchColors:"Pesquisar cores...",allManufacturers:"Todos os fabricantes",addNewColor:"Adicionar Nova Cor",manufacturer:"Fabricante",colorName:"Nome da Cor",hex:"Hex",materialOptional:"Material (opcional)",showing:"Mostrando {{filtered}} de {{total}} cores",noMatch:"Nenhuma cor corresponde à sua pesquisa",empty:"Nenhuma cor no catálogo",deleteColor:"Excluir Cor",deleteConfirm:'Tem certeza de que deseja excluir "{{name}}"?',resetCatalog:"Redefinir Catálogo de Cores",resetConfirm:"Redefinir catálogo para os padrões? Isso removerá todas as cores personalizadas.",sync:"Sincronizar",starting:"Iniciando...",syncTooltip:"Sincronizar do FilamentColors.xyz (2000+ cores, pode levar um minuto)",loadFailed:"Falha ao carregar o catálogo de cores",fieldsRequired:"Fabricante, nome da cor e cor hex são obrigatórios",colorAdded:"Cor adicionada",addFailed:"Falha ao adicionar cor",colorUpdated:"Cor atualizada",updateFailed:"Falha ao atualizar cor",colorDeleted:"Cor excluída",deleteFailed:"Falha ao excluir cor",resetSuccess:"Catálogo de cores redefinido para os padrões",resetFailed:"Falha ao redefinir catálogo",syncUpToDate:"Já está atualizado ({{count}} cores verificadas)",syncComplete:"Adicionadas {{added}} novas cores ({{skipped}} já existiam)",syncError:"Erro de sincronização",syncFailed:"Falha ao sincronizar do FilamentColors.xyz",exported:"Exportadas {{count}} cores",imported:"Importadas {{added}} cores ({{skipped}} ignoradas)",importFailed:"Falha ao importar: formato JSON inválido",selectedCount:"{{count}} selecionados",deleteSelected:"Excluir Selecionados",bulkDeleteConfirm:"Tem certeza de que deseja excluir {{count}} cores?",bulkDeleted:"{{count}} cores excluídas",bulkDeleteFailed:"Falha ao excluir cores"},dateFormat:"Formato de data",dateFormatUs:"US (MM/DD/AAAA)",dateFormatEu:"EU (DD/MM/AAAA)",dateFormatIso:"ISO (AAAA-MM-DD)",timeFormat:"Formato de hora",timeFormat12:"12 horas (3:30 PM)",timeFormat24:"24 horas (15:30)",defaultPrinter:"Impressora padrão",defaultPrinterDescription:"Pré-selecionar esta impressora para uploads, reimpressões e outras operações.",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"Arraste itens na barra lateral para reordenar. Restaurar ordem padrão aqui.",setDefault:"Definir padrão",sidebarOrderSetDefaultHint:"Definir padrão aplica a ordem atual do menu aos usuários que ainda não personalizaram o seu.",sidebarDefaultSet:"Ordem padrão do menu foi definida.",sidebarDefaultCleared:"Ordem padrão do menu removida.",sidebarDefaultFailed:"Falha ao definir a ordem padrão do menu.",reset:"Redefinir",darkMode:"Modo escuro",lightMode:"Modo claro",active:"(ativo)",background:"Fundo",accent:"Destaque",style:"Estilo",bgNeutral:"Neutro",bgWarm:"Quente",bgCool:"Frio",bgOled:"OLED Preto",bgSlate:"Azul ardósia",bgForest:"Verde floresta",accentGreen:"Verde",accentTeal:"Azul-petróleo",accentBlue:"Azul",accentOrange:"Laranja",accentPurple:"Roxo",accentRed:"Vermelho",styleClassic:"Clássico",styleGlow:"Brilhante",styleVibrant:"Vibrante",themeToggleHint:"Alternar entre modo escuro, claro e sistema usando o ícone na barra lateral.",autoArchivePrints:"Arquivar impressões automaticamente",autoArchiveDescription:"Salvar automaticamente arquivos 3MF quando impressões forem concluídas",saveThumbnailsDescription:"Extrair e salvar imagens de pré-visualização dos arquivos 3MF",captureFinishPhotoDescription:"Tirar foto da câmera da impressora quando a impressão for concluída. Bambuddy grava um timelapse curto durante a impressão para que a foto possa ser obtida do momento antes da mesa descer; o arquivo do timelapse é mantido se você habilitou o timelapse para esta impressão, caso contrário ele é excluído automaticamente após a captura da foto.",ffmpegNotInstalled:"ffmpeg não instalado",ffmpegRequired:"A captura de câmera requer ffmpeg. Instale via <brew>brew install ffmpeg</brew> (macOS) ou <apt>apt install ffmpeg</apt> (Linux).",camera:"Câmera",cameraViewMode:"Modo de visualização da câmera",cameraOverlayDescription:"A câmera abre em uma sobreposição redimensionável na tela principal",cameraWindowDescription:"A câmera abre em uma janela separada do navegador",externalCamerasDescription:"Configure câmeras externas para substituir a câmera integrada da impressora. Suporta streams MJPEG, RTSP, snapshots HTTP e câmeras USB (V4L2). Quando habilitada, a câmera externa é usada para visualização ao vivo e fotos de conclusão.",cameraPlaceholderUsb:"Caminho do dispositivo (/dev/video0)",cameraPlaceholderUrl:"URL da câmera (rtsp://... ou http://...)",cameraTypeMjpeg:"Stream MJPEG",cameraTypeRtsp:"Stream RTSP",cameraTypeSnapshot:"Snapshot HTTP",cameraTypeUsb:"Câmera USB (V4L2)",cameraSnapshotUrl:"URL de captura (opcional)",cameraSnapshotUrlPlaceholder:"http://192.168.1.61:1984/api/frame.jpeg?src=printer",cameraSnapshotUrlHelp:"URL de frame único usado para miniaturas de notificação, fotos de finalização, frames do timelapse por camada e detecção de mesa. Timelapse e detecção de mesa requerem cada um seu próprio toggle por impressora — esta URL é apenas a fonte de imagem que eles usam quando ativos. Deixe em branco para capturar do stream ao vivo acima. Útil para go2rtc (/api/frame.jpeg) e câmeras IP com endpoint de captura dedicado.",cameraRotation:"Rotação",test:"Testar",connected:"Conectado",disconnected:"Desconectado",currency:"Moeda",defaultFilamentCost:"Custo padrão do filamento (por kg)",electricityCost:"Custo da eletricidade por kWh",energyDisplayMode:"Modo de exibição de energia",energyModePrintDescription:"O painel mostra a soma da energia usada durante as impressões",energyModeTotalDescription:"O painel mostra a energia total dos plugues inteligentes",fileManager:"Gerenciador de arquivos",createArchiveEntry:"Criar entrada de arquivo ao imprimir",createArchiveEntryDescription:"Ao imprimir pelo gerenciador de arquivos, criar opcionalmente uma entrada de arquivo",lowDiskSpaceWarning:"Aviso de pouco espaço em disco",lowDiskSpaceDescription:"Mostrar aviso quando o espaço livre em disco ficar abaixo deste limite",printerFirmware:"Firmware da impressora",checkFirmwareDescription:"Verificar atualizações de firmware da Bambu Lab",bambuddySoftware:"Software Bambuddy",autoCheckDescription:"Verificar automaticamente novas versões ao iniciar",checkNow:"Verificar agora",updateAvailableVersion:"Atualização disponível: v{{version}}",releaseNotes:"Notas da versão",updateViaDocker:"Atualizar via Docker Compose:",updateViaHomeAssistant:"As atualizações são gerenciadas pelo Supervisor do Home Assistant. Abra Configurações → Complementos → Bambuddy no Home Assistant para instalar a nova versão.",installUpdate:"Instalar atualização",latestVersionRunning:"Você está usando a versão mais recente",failedToCheckUpdates:"Falha ao verificar atualizações: {{error}}",backupRestore:"Backup e Restauração",backupRestoreDescription:"Exportar/importar configurações e configurar backup do GitHub",goToBackup:"Ir para backup",externalUrl:"URL externa",externalUrlDescription:"A URL externa onde o Bambuddy está acessível. Usada para imagens de notificação e integrações externas.",bambuddyUrl:"URL do Bambuddy",externalUrlHint:"Inclua protocolo e porta (ex: http://192.168.1.100:8000)",ftpRetry:"Tentativa FTP",ftpRetryDescription:"Tentar novamente operações FTP quando o WiFi da impressora é instável. Aplica-se a downloads 3MF, uploads de impressão, downloads de timelapse e atualizações de firmware.",autoRetryDescription:"Tentar novamente automaticamente operações FTP que falharam",retryAttempts:"Tentativas de reenvio",retryDelay:"Atraso entre tentativas",connectionTimeout:"Tempo limite de conexão",time_one:"{{count}} vez",time_other:"{{count}} vezes",second_one:"{{count}} segundo",second_other:"{{count}} segundos",nSeconds:"{{count}} segundos",increaseForWeakWifi:"Aumente para impressoras com WiFi fraco",homeAssistant:"Home Assistant",homeAssistantFullDescription:"Conecte ao Home Assistant para controlar plugues inteligentes via API REST do HA. Suporta entidades switch, light, input_boolean e script.",homeAssistantUrl:"URL do Home Assistant",longLivedAccessToken:"Token de acesso de longa duração",haTokenHint:"Crie um token no HA: Perfil → Tokens de acesso de longa duração → Criar token",connectionSuccessful:"Conexão bem-sucedida",connectionFailed:"Falha na conexão",haConnectionSuccess:"Conectado com sucesso ao Home Assistant.",haConnectionFailed:"Falha ao conectar ao Home Assistant.",mqttPublishing:"Publicação MQTT",mqttDescription:"Publique eventos do BamBuddy para um broker MQTT externo para integração com Node-RED, Home Assistant e outros sistemas de automação.",mqttEnableDescription:"Publicar eventos no broker MQTT externo",brokerHostname:"Hostname do broker",port:"Porta",usernameOptional:"Usuário (opcional)",passwordOptional:"Senha (opcional)",topicPrefix:"Prefixo do tópico",topicPrefixHint:"Os tópicos serão: {{prefix}}/printers/<serial>/status, etc.",prometheusMetrics:"Métricas Prometheus",prometheusEndpointDescription:"Expor métricas da impressora em <code>/api/v1/metrics</code> para monitoramento Prometheus/Grafana.",bearerTokenOptional:"Token Bearer (opcional)",bearerTokenHint:"Se definido, as requisições devem incluir <code>Authorization: Bearer <token></code>",metricsConnectionStatus:"Status da conexão",metricsPrinterState:"Estado da impressora (idle/printing/etc)",metricsPrintProgress:"Progresso da impressão 0-100%",metricsBedTemp:"Temperatura da mesa",metricsNozzleTemp:"Temperatura do bico",metricsPrintsTotal:"Total de impressões por resultado",metricsMore:"...e mais (camadas, ventoinhas, fila, uso de filamento)",smartPlugsDescription:"Conecte plugues inteligentes (Tasmota ou Home Assistant) para automatizar o controle de energia e rastrear o consumo energético das suas impressoras.",allOn:"Ligar todos",allOff:"Desligar todos",addSmartPlug:"Adicionar plugue inteligente",energySummary:"Resumo de energia",currentPower:"Potência atual",plugsOnline:"{{reachable}}/{{total}} plugues online",today:"Hoje",yesterday:"Ontem",total:"Total",enablePlugsForSummary:"Habilite os plugues para ver o resumo de energia",addNotificationProvider:"Adicionar",systemBadge:"(Sistema)",creating:"Criando...",changing:"Alterando...",deleteUserAndItems:"Excluir usuário E seus itens",deleteUserKeepItems:"Excluir usuário, manter itens (ficarão sem dono)",ok:"OK",twoFa:{totpTitle:"App Autenticador (TOTP)",totpDesc:"Use um app como Google Authenticator, Aegis ou Authy.",emailOtpTitle:"OTP por e-mail",emailOtpDesc:"Envie um código único para {{email}} ao fazer login.",emailOtpNoEmail:"Adicione um endereço de e-mail à sua conta para ativar este método.",addEmailFirst:"Sua conta não tem endereço de e-mail. Peça a um administrador para adicionar um.",setupTotp:"Configurar App Autenticador",setupAuthApp:"Configurar App Autenticador",setupInstructions:"Escaneie o código QR com seu app autenticador e confirme com um código.",manualEntry:"Não consegue escanear? Digite este segredo manualmente:",scannedContinue:"Código escaneado — continuar",enterCodeToConfirm:"Digite o código de 6 dígitos do seu app autenticador para confirmar.",activate:"Ativar",disableTotp:"Desativar Autenticador",disableConfirmHint:"Digite um código TOTP válido ou um código de backup para desativar o autenticador.",totpDisabled:"App autenticador desativado.",emailOtpEnabled:"OTP por e-mail ativado.",emailOtpDisabled:"OTP por e-mail desativado.",smtpRequired:"Por favor, configure e teste as configurações SMTP primeiro.",invalidCode:"Código inválido. Por favor, tente novamente.",enableEmailOtp:"Ativar OTP por e-mail",disableEmailOtp:"Desativar OTP por e-mail",emailSetupEnterCode:"Um código de verificação foi enviado para o seu endereço de e-mail. Digite-o abaixo para confirmar que você possui esta caixa de entrada.",verifyAndEnable:"Verificar e Ativar",emailDisablePasswordHint:"Digite a senha da sua conta para confirmar a desativação do OTP por e-mail.",passwordPlaceholder:"Digite sua senha",backupCodesTitle:"Salve seus códigos de backup",backupCodesWarning:"Guarde estes códigos em lugar seguro. Cada código só pode ser usado uma vez.",backupCodesRemaining:"{{count}} códigos de backup restantes",savedCodes:"Códigos salvos",regenBackup:"Regenerar códigos de backup",regenBackupHint:"Digite seu código TOTP atual para gerar 10 novos códigos de backup.",newBackupCodes:"Novos códigos de backup",linkedAccounts:"Contas SSO vinculadas",linkedAccountsDesc:"Estes provedores de identidade externos estão vinculados à sua conta.",oidcUnlinked:"Conta desvinculada."},oidc:{title:"Provedores SSO / OIDC",desc:"Configure provedores OpenID Connect para login único.",addProvider:"Adicionar provedor",newProvider:"Novo provedor",empty:"Nenhum provedor OIDC configurado ainda.",created:"Provedor criado.",updated:"Provedor atualizado.",deleted:"Provedor excluído.",refreshIcon:"Atualizar ícone",removeIcon:"Remover ícone",iconRefreshed:"Ícone atualizado.",iconRemoved:"Ícone removido.",iconFetchFailed:"Não foi possível obter o ícone da URL do provedor.",deleteTitle:"Excluir provedor",deleteMessage:'Excluir "{{name}}"? Todas as contas vinculadas serão desconectadas.',form:{name:"Nome de exibição",issuerUrl:"URL do emissor",clientId:"ID do cliente",clientSecret:"Client secret",scopes:"Escopos",iconUrl:"URL do ícone (opcional)",enabled:"Ativado",autoCreate:"Criar usuários automaticamente",autoCreateDesc:"Cria automaticamente uma conta local no primeiro login.",autoLink:"Vincular contas existentes automaticamente",autoLinkDesc:"Vincula contas locais existentes por e-mail no primeiro login.",secretHint:"deixe em branco para manter",secretPlaceholder:"novo segredo",emailClaim:"Claim de e-mail",emailClaimDesc:"Claim JWT usado como identidade de e-mail. Use 'preferred_username' ou 'upn' para Azure Entra ID (que não envia email_verified). Use apenas nomes de claim confiáveis.",emailClaimPlaceholder:"e-mail",emailClaimCustomClaimAutoLinkWarning:"Claims personalizadas são seguras para vinculação automática apenas quando o valor é administrado pelo tenant (ex. Azure Entra ID upn / preferred_username). Não ative a vinculação automática se seu IdP permite que usuários auto-declarem essa claim.",requireEmailVerified:"Exigir e-mail verificado",requireEmailVerifiedDesc:"Aceitar o claim de e-mail apenas quando o provedor o marcar como verificado.",requireEmailVerifiedWarning:"Aviso: o e-mail será aceito sem verificação. Use apenas com provedores confiáveis.",requireEmailVerifiedAutoLink:"Desabilite o vínculo automático primeiro para alterar esta configuração.",defaultGroup:"Grupo padrão",defaultGroupDesc:"Grupo atribuído aos usuários criados automaticamente. Retorna a Viewers se não definido.",defaultGroupViewersFallback:"Viewers (padrão)"}},encryption:{title:"Status de criptografia MFA",enabledFromEnv:"Criptografia em repouso ativa (chave da variável de ambiente MFA_ENCRYPTION_KEY)",enabledFromFile:"Criptografia em repouso ativa (chave do diretório de dados)",enabledGenerated:"Criptografia em repouso ativa com chave auto-gerada",notConfigured:"Criptografia em repouso não configurada",notConfiguredDesc:"Os segredos TOTP e client_secrets OIDC são armazenados em texto plano. Defina MFA_ENCRYPTION_KEY ou reinicie o Bambuddy com um diretório de dados gravável para gerar automaticamente.",allEncrypted:"Todos os segredos MFA são criptografados em repouso.",legacyRowsLabel:"Linhas legadas em texto plano",encryptedRowsLabel:"Linhas criptografadas",legacyRowsWarning:"{{count}} linha(s) legada(s) em texto plano detectada(s). Salve novamente o provedor OIDC ou registre novamente o autenticador do usuário para migrar ao armazenamento criptografado.",backupHint:"A chave auto-gerada é armazenada em DATA_DIR/.mfa_encryption_key e incluída em ZIPs de backup locais. Mantenha seus backups seguros ou defina MFA_ENCRYPTION_KEY explicitamente.",decryptionBrokenTitle:"Chave de criptografia ausente",decryptionBrokenError:"{{count}} registro(s) criptografado(s) não podem ser descriptografados pois a chave de criptografia não está mais disponível. Restaure o MFA_ENCRYPTION_KEY anterior ou DATA_DIR/.mfa_encryption_key para recuperar.",migrationErrorWarning:"{{count}} linha(s) antiga(s) não puderam ser recriptografadas na inicialização. Verifique os logs do servidor e reinicie o Bambuddy para tentar novamente."},spoolbuddy:{infoTitle:"Dispositivos SpoolBuddy",infoBody:"Os kiosks SpoolBuddy se registram automaticamente via heartbeat. Cancele o registro de um dispositivo aqui se não estiver mais em uso ou se um duplicado obsoleto foi deixado por uma falha do daemon.",duplicatesTitle:"{{count}} dispositivos registrados",duplicatesBody:"Apenas o primeiro dispositivo registrado é usado pela interface do kiosk. Se algum destes for um duplicado obsoleto após uma falha, cancele seu registro — um dispositivo online se registrará novamente no próximo heartbeat.",empty:"Nenhum dispositivo SpoolBuddy registrado ainda.",online:"Online",offline:"Offline",unregister:"Cancelar registro",unregisterSuccess:"Dispositivo removido",unregisterError:"Falha ao cancelar registro",confirmTitle:"Cancelar registro do dispositivo SpoolBuddy?",confirmBody:'Isso removerá "{{hostname}}" ({{deviceId}}) do banco de dados. Se o dispositivo estiver online, ele se registrará novamente no próximo heartbeat.',ipAddress:"Endereço IP",firmware:"Firmware",lastSeen:"Visto pela última vez",daemonUptime:"Tempo ativo do daemon",systemUptime:"Tempo ativo do sistema",never:"nunca",nfc:"NFC",scale:"Balança",cpuTemp:"Temp. CPU",cpuLoad:"Carga da CPU",memory:"Memória",disk:"Disco",update:"Atualizar",updateConfirmTitle:"Atualizar daemon do Spoolbuddy?",updateConfirmBody:'Iniciar uma atualização de software em "{{hostname}}"? O daemon será reiniciado após a aplicação.',restartBrowser:"Reiniciar navegador",restartBrowserConfirmTitle:"Reiniciar o navegador do kiosk?",restartBrowserConfirmBody:'Reiniciar o navegador do kiosk em "{{hostname}}"? A tela ficará em branco brevemente.',restartDaemon:"Reiniciar daemon",restartDaemonConfirmTitle:"Reiniciar daemon do Spoolbuddy?",restartDaemonConfirmBody:'Reiniciar o daemon do Spoolbuddy em "{{hostname}}"? O dispositivo ficará offline por alguns segundos.',reboot:"Reiniciar",rebootConfirmTitle:"Reiniciar o dispositivo?",rebootConfirmBody:'Reiniciar "{{hostname}}"? O dispositivo ficará offline por cerca de um minuto.',shutdown:"Desligar",shutdownConfirmTitle:"Desligar o dispositivo?",shutdownConfirmBody:'Desligar "{{hostname}}"? Será necessário acesso físico para ligá-lo novamente.',commandConfirm:"Confirmar",commandQueued:"Comando enfileirado",commandError:"Falha ao enviar comando"}},notification:{printStarted:{title:"Impressão Iniciada",body:"{{printer}}: {{filename}} iniciou a impressão"},printCompleted:{title:"Impressão Concluída",body:"{{printer}}: {{filename}} foi concluída com sucesso"},printFailed:{title:"Falha na Impressão",body:"{{printer}}: {{filename}} falhou"},printStopped:{title:"Impressão Interrompida",body:"{{printer}}: {{filename}} foi interrompida"},printProgress:{title:"Progresso da Impressão",body:"{{printer}}: {{filename}} está {{percent}}% concluída"},printerOffline:{title:"Impressora Offline",body:"{{printer}} está offline"},printerError:{title:"Erro na Impressora",body:"{{printer}} – {{error}}"},filamentLow:{title:"Filamento Baixo",body:"{{printer}}: O filamento está acabando"},maintenanceDue:{title:"Manutenção Pendente",body:"{{printer}}: {{items}} precisam de atenção"}},errors:{generic:"Algo deu errado",networkError:"Erro de rede. Por favor, verifique sua conexão.",notFound:"Não encontrado",unauthorized:"Não autorizado",serverError:"Erro no servidor",validationError:"Por favor, verifique sua entrada",printerConnectionFailed:"Falha ao conectar à impressora",saveFailed:"Falha ao salvar alterações",deleteFailed:"Falha ao excluir",loadFailed:"Falha ao carregar dados"},hmsErrors:{title:"Erros - {{name}}",noErrors:"Nenhum erro",viewOnWiki:"Ver no Bambu Lab Wiki",clearInstructions:"Limpe os erros na impressora para descartá-los aqui.",clearErrors:"Limpar Erros",clearSuccess:"Erros HMS limpos",clearFailed:"Falha ao limpar erros HMS"},mqttDebug:{title:"MQTT Log de Depuração",searchPlaceholder:"Pesquisar tópico ou payload...",noMessages:"Nenhuma mensagem registrada ainda",startLoggingHint:'Clique em "Iniciar Registro" para começar a capturar mensagens MQTT',noMessagesMatch:"Nenhuma mensagem corresponde ao seu filtro",adjustFilterHint:"Tente ajustar seus critérios de pesquisa ou filtro",incoming:"Entrada",outgoing:"Saída",loggingStopped:"Registro interrompido",loggingActive:"Registro ativo - as mensagens serão atualizadas automaticamente",startLogging:"Iniciar Registro",stopLogging:"Parar Registro",clearLog:"Limpar Registro",topic:"ópico",timestamp:"Carimbo de Data/Hora",direction:"Direção",all:"Todos"},printerFiles:{title:"Gerenciador de Arquivos",storageUsed:"Usado:",storageFree:"Livre:",filterPlaceholder:"Filtrar arquivos...",deleteButton:"Excluir",deleteFiles:"Excluir {{count}} arquivos",deleteFileConfirm:'Excluir "{{name}}"? Isso não pode ser desfeito.',deleteFilesConfirm:"Excluir {{count}} arquivos selecionados? Isso não pode ser desfeito.",noFiles:"Nenhum arquivo na impressora",loadingFiles:"Carregando arquivos...",failedToLoad:"Falha ao carregar arquivos",toast:{filesDeleted:"Arquivos excluídos: {{count}}",deleteFailed:"Falha ao excluir: {{error}}"}},confirm:{delete:"Tem certeza de que deseja excluir isso?",unsavedChanges:"Você tem alterações não salvas. Tem certeza de que deseja sair?",clearQueue:"Tem certeza de que deseja limpar a fila?"},login:{title:"Login Bambuddy",subtitle:"Faça login na sua conta",username:"Nome de usuário",usernamePlaceholder:"Digite seu nome de usuário",usernameOrEmail:"Nome de usuário ou Email",usernameOrEmailPlaceholder:"Nome de usuário ou Email",password:"Senha",passwordPlaceholder:"Digite sua senha",signIn:"Entrar",signingIn:"Entrando...",rememberMe:"Lembrar de mim",forgotPassword:"Esqueceu sua senha?",loginSuccess:"Login realizado com sucesso",loginFailed:"Falha no login",enterCredentials:"Por favor, insira nome de usuário e senha",enterEmail:"Por favor, insira seu endereço de e-mail",oidcLoginFailed:"Falha no login OIDC",oidcErrors:{providerError:"O provedor de identidade retornou um erro",missingParameters:"Parâmetros obrigatórios ausentes no callback OIDC",invalidState:"Estado OIDC inválido ou já utilizado",stateExpired:"Sessão OIDC expirada — tente novamente",providerNotFound:"Provedor OIDC não encontrado",discoveryFailed:"Falha ao obter o documento de descoberta OIDC",invalidDiscovery:"Documento de descoberta OIDC inválido",networkError:"Erro de rede durante a troca de token OIDC",badResponse:"Resposta inesperada durante a troca de token OIDC",noIdToken:"O provedor OIDC não retornou um token de ID",validationFailed:"Falha na validação do token OIDC",nonceMismatch:"Nonce OIDC não corresponde — possível ataque de replay",missingSubClaim:"Token OIDC sem claim sub",noLinkedAccount:"Nenhuma conta local vinculada a esta identidade OIDC",accountInactive:"Sua conta está inativa",userResolutionFailed:"Falha ao resolver sua conta",internalError:"Erro interno durante o login OIDC",tokenExchangeFailed:"Falha na troca de token OIDC"},forgotPasswordTitle:"Esqueceu a Senha",forgotPasswordMessage:"Se você esqueceu sua senha, entre em contato com o administrador do sistema para redefini-la.",forgotPasswordEmailMessage:"Digite seu endereço de email e enviaremos uma nova senha.",emailAddress:"Endereço de Email",emailPlaceholder:"seu.email@exemplo.com",cancel:"Cancelar",sending:"Enviando...",sendResetEmail:"Enviar Email de Redefinição",howToReset:"Como redefinir sua senha:",resetStep1:"Entre em contato com o administrador do Bambuddy",resetStep2:"Peça para redefinir sua senha na Gestão de Usuários",resetStep3:"Eles podem definir uma nova senha temporária para você",resetStep4:"Faça login com a nova senha e altere-a nas Configurações",gotIt:"Entendi",resetPassword:{title:"Definir nova senha",subtitle:"Digite e confirme sua nova senha abaixo.",newPassword:"Nova senha",newPasswordPlaceholder:"Pelo menos 8 caracteres",confirmPassword:"Confirmar senha",confirmPasswordPlaceholder:"Repetir nova senha",saving:"Salvando…",submit:"Definir nova senha",backToLogin:"Voltar para o login",passwordsDoNotMatch:"As senhas não coincidem",passwordTooShort:"A senha deve ter pelo menos 8 caracteres",resetFailed:"Falha ao redefinir senha. O link pode ter expirado."},twoFA:{title:"Autenticação em dois fatores",subtitle:"Sua conta está protegida com 2FA. Insira o código de verificação abaixo.",methodAuthenticator:"Aplicativo autenticador",methodEmail:"Código por e-mail",methodBackup:"Código de recuperação",instructionsTotp:"Abra seu aplicativo autenticador e insira o código de 6 dígitos gerado para o Bambuddy.",instructionsEmail:"Um código de 6 dígitos foi enviado para o seu e-mail. Ele é válido por 10 minutos.",instructionsEmailNotSent:"Clique no botão abaixo para receber um código de verificação por e-mail.",instructionsBackup:"Insira um dos seus códigos de recuperação de 8 caracteres. Cada código só pode ser utilizado uma vez.",sendCodeButton:"Enviar código por e-mail",sendingCode:"Enviando...",resendCode:"Reenviar código",codeLabel:"Código de verificação",backupCodeLabel:"Código de recuperação",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"Verificar",verifyingButton:"Verificando...",backToLogin:"← Voltar para o login",orContinueWith:"ou entrar com",signInWith:"Entrar com {{provider}}",enterCode:"Por favor, insira o código de verificação",sendCodeFailed:"Falha ao enviar o código de verificação",invalidCode:"Código inválido. Por favor, tente novamente."}},setup:{title:"Bambuddy Configuração",subtitle:"Configure a autenticação para sua instância do Bambuddy",enableAuth:"Ativar Autenticação",adminAccount:"Conta de Administrador",adminAccountDesc:"Se usuários administradores já existirem, a autenticação será ativada usando as contas de administrador existentes. Deixe os campos abaixo vazios para usar os administradores existentes ou insira novas credenciais para criar um novo usuário administrador.",adminUsername:"Nome de usuário do administrador",adminPassword:"Senha do administrador",optionalIfAdminExists:"(opcional se usuários administradores existirem)",adminUsernamePlaceholder:"Digite o nome de usuário do administrador (opcional)",adminPasswordPlaceholder:"Digite a senha do administrador (opcional)",confirmPassword:"Confirmar Senha",confirmPasswordPlaceholder:"Confirme a senha do administrador",settingUp:"Configurando...",completeSetup:"Concluir Configuração",toast:{authEnabledAdminCreated:"Autenticação ativada e usuário administrador criado",authEnabledExistingAdmins:"Autenticação ativada usando usuários administradores existentes",setupCompleted:"Configuração concluída",enterBothCredentials:"Por favor, insira o nome de usuário e a senha do administrador, ou deixe ambos vazios para usar os usuários administradores existentes",passwordsDoNotMatch:"As senhas não coincidem",passwordTooShort:"A senha deve ter pelo menos 6 caracteres"}},changePassword:{title:"Alterar Senha",currentPassword:"Senha Atual",currentPasswordPlaceholder:"Digite a senha atual",newPassword:"Nova Senha",newPasswordPlaceholder:"Digite a nova senha (mínimo 6 caracteres)",confirmPassword:"Confirmar Senha",confirmPasswordPlaceholder:"Confirme a nova senha",passwordsDoNotMatch:"As senhas não coincidem",passwordTooShort:"A senha deve ter pelo menos 6 caracteres",changing:"Alterando...",success:"Senha alterada com sucesso",failed:"Falha ao alterar a senha"},plateAlert:{title:"Impressão Pausada!",message:"Objetos detectados na mesa de impressão. A impressão foi automaticamente pausada. Por favor, limpe a mesa e retome a impressão.",understand:"Entendi"},camera:{title:"Visualização da Câmera",invalidPrinterId:"ID da impressora inválido",live:"Ao Vivo",snapshot:"Captura",restartStream:"Reiniciar transmissão",refreshSnapshot:"Atualizar captura",fullscreen:"Tela Cheia",exitFullscreen:"Sair da Tela Cheia",connectingToCamera:"Conectando à câmera...",capturingSnapshot:"Capturando imagem...",connectionLost:"Conexão perdida",connectionFailed:"Falha na conexão com a câmera",reconnecting:"Reconectando em {{countdown}}s... (tentativa {{attempt}}/{{max}})",reconnectNow:"Reconectar agora",cameraUnavailable:"Câmera indisponível",cameraUnavailableDesc:"Certifique-se de que a impressora está ligada e conectada.",noCamera:"Nenhuma câmera disponível",retry:"Tentar novamente",cameraStream:"Transmissão da câmera",zoomOut:"Reduzir zoom",zoomIn:"Aumentar zoom",resetZoom:"Redefinir zoom",recording:"Gravando",startRecording:"Iniciar gravação",stopRecording:"Parar gravação",chamberLight:"Alternar luz da câmara",unavailable:"Câmera indisponível",diagnose:{button:"Diagnóstico",modalTitle:"Diagnóstico da câmera",running:"Executando diagnóstico...",runFailed:"Não foi possível executar o diagnóstico: {{error}}",retry:"Executar novamente",stage:{tcp_reachable:"Conectividade de rede",first_frame:"Captura de frame",live_stream_active:"Transmissão ao vivo ativa"},summary:{all_ok:"A câmera está funcionando. O diagnóstico concluiu todas as etapas com sucesso.",live_stream_active_healthy:"A câmera está transmitindo com frames recentes — nenhum teste necessário.",printer_unreachable:"Impressora inacessível. Verifique o endereço IP, a conexão de rede e se a impressora está ligada.",camera_port_closed:"A impressora responde mas a porta da câmera está fechada. Verifique se o modo LAN e o modo desenvolvedor estão ativados nas configurações da impressora.",no_frame:"Conexão com a câmera estabelecida mas nenhum frame recebido. Tente novamente ou verifique se a câmera está habilitada nas configurações da impressora.",unknown_failure:"Diagnóstico da câmera falhou por motivo desconhecido. Consulte o log de suporte para mais detalhes."},meta:{protocol:"Protocolo",port:"Porta",profile:"Perfil"}}},groups:{title:"Gerenciamento de Grupos",subtitle:"Gerenciar grupos de permissão para controle de acesso",backToSettings:"Voltar para Configurações",createGroup:"Criar Grupo",noPermission:"Você não tem permissão para acessar esta página.",system:"Sistema",noDescription:"Sem descrição",usersCount:"{{count}} usuários",permissionsCount:"{{count}} permissões",edit:"Editar",delete:"Excluir",toast:{created:"Grupo criado com sucesso",updated:"Grupo atualizado com sucesso",deleted:"Grupo excluído com sucesso",enterGroupName:"Por favor, insira um nome para o grupo"},modal:{editGroup:"Editar Grupo",createGroup:"Criar Grupo",cancel:"Cancelar",saving:"Salvando...",creating:"Criando...",saveChanges:"Salvar Alterações"},form:{groupName:"Nome do Grupo",groupNamePlaceholder:"Insira o nome do grupo",systemGroupWarning:"Os nomes dos grupos do sistema não podem ser alterados",description:"Descrição",descriptionPlaceholder:"Insira a descrição (opcional)",permissions:"Permissões ({{count}} selecionadas)"},deleteModal:{title:"Excluir Grupo",message:"Tem certeza de que deseja excluir este grupo? Os usuários deste grupo perderão essas permissões.",confirm:"Excluir Grupo"},editor:{title:"Editar Grupo",createTitle:"Criar Grupo",search:"Pesquisar permissões...",selectAll:"Selecionar Tudo",clearAll:"Limpar Tudo",permissionsSelected:"{{count}} selecionada(s)",noResults:"Nenhuma permissão corresponde à sua pesquisa"}},users:{title:"Gerenciamento de Usuários",subtitle:"Gerenciar usuários e seu acesso à sua instância do Bambuddy",backToSettings:"Voltar para Configurações",createUser:"Criar Usuário",noPermission:"Você não tem permissão para acessar esta página.",admin:"Administrador",noGroups:"Sem grupos",active:"Ativo",inactive:"Inativo",edit:"Editar",delete:"Excluir",system:"Sistema",noGroupsAvailable:"Nenhum grupo disponível",table:{username:"Nome de Usuário",groups:"Grupos",status:"Status",actions:"Ações"},toast:{created:"Usuário criado com sucesso",updated:"Usuário atualizado com sucesso",deleted:"Usuário excluído com sucesso",fillRequired:"Por favor, preencha todos os campos obrigatórios",passwordsDoNotMatch:"As senhas não coincidem",passwordTooShort:"A senha deve ter pelo menos 6 caracteres",ldapProvisioned:'Usuário LDAP "{{username}}" provisionado'},modal:{createUser:"Criar Usuário",editUser:"Editar Usuário",cancel:"Cancelar",creating:"Criando...",saving:"Salvando...",saveChanges:"Salvar Alterações",advancedAuthSubtitle:"com Autenticação Avançada",tabsAriaLabel:"Fonte do usuário",localTab:"Local",ldapTab:"LDAP",ldapSearchLabel:"Pesquisar diretório",ldapSearchPlaceholder:"Digite um nome de usuário, nome ou e-mail...",ldapMinChars:"Digite ao menos 2 caracteres para pesquisar",ldapTypeToSearch:"Comece a digitar para pesquisar o diretório LDAP",ldapSearching:"Pesquisando diretório...",ldapNoResults:"Nenhum usuário correspondente no diretório",ldapSearchError:"Falha na pesquisa do diretório. Verifique o status do servidor LDAP.",ldapAlreadyProvisioned:"Já provisionado",ldapSelectedLabel:"Selecionado",ldapProvision:"Provisionar usuário",ldapProvisioning:"Provisionando...",ldapErrorProvision:"Falha no provisionamento. Verifique o status do servidor LDAP e tente novamente."},form:{username:"Nome de Usuário",usernamePlaceholder:"Insira o nome de usuário",email:"E-mail",emailPlaceholder:"user@example.com",password:"Senha",passwordPlaceholder:"Insira a senha",confirmPassword:"Confirmar Senha",confirmPasswordPlaceholder:"Confirme a senha",newPasswordPlaceholder:"Insira a nova senha",confirmNewPasswordPlaceholder:"Confirme a nova senha",leaveBlankToKeep:"deixe em branco para manter a atual",groups:"Grupos",optional:"opcional",autoGeneratedPassword:"Uma senha segura será gerada automaticamente e enviada por e-mail ao usuário.",passwordManagedByAdvancedAuth:'A senha é gerenciada pela Autenticação Avançada. Use "Redefinir Senha" para enviar uma nova senha ao usuário por e-mail.',resetPassword:"Redefinir Senha",resettingPassword:"Redefinindo Senha..."},deleteModal:{title:"Excluir Usuário",message:"Tem certeza de que deseja excluir este usuário? Esta ação não pode ser desfeita.",confirm:"Excluir Usuário"}},streamOverlay:{title:"Sobreposição de stream",invalidPrinterId:"ID da impressora inválido",cameraStream:"Transmissão da câmera",progress:"Progresso da impressão",eta:"ETA",printerIdle:"Impressora ociosa",printerOffline:"Impressora offline",status:{printing:"Imprimindo",paused:"Pausado",finished:"Concluído",failed:"Falhou",idle:"Ocioso",unknown:"Desconhecido"}},profiles:{title:"Perfis",subtitle:"Gerencie seus presets de fatiador e calibrações de avanço de pressão",tabs:{bambuCloud:"Bambu Cloud",orcaCloud:"Orca Cloud",local:"Perfis Locais",kprofiles:"K-Perfis"},orcaCloud:{connectedAs:"Conectado como",logout:"Desconectar",noLogoutPermission:"Você não tem permissão para desconectar",noConnectPermission:"Você não tem permissão para conectar ao Orca Cloud",retry:"Tentar novamente",back:"Usar outro método de login",connect:{title:"Conectar ao Orca Cloud",description:"Entre na sua conta Orca Cloud para sincronizar seus perfis de slicer no Bambuddy."},providers:{google:"Entrar com Google",apple:"Entrar com Apple",github:"Entrar com GitHub",email:"Entrar com e-mail e senha"},password:{title:"Entrar com e-mail e senha",email:"E-mail",emailPlaceholder:"voce@exemplo.com.br",password:"Senha",submit:"Entrar"},paste:{title:"Concluir login",step1:"Uma nova aba abriu com a página de login do Orca Cloud. Entre com sua conta Orca.",step2:'Seu navegador será redirecionado para uma URL "localhost" que não carregará. Isso é esperado — é dessa URL que precisamos.',step3:"Copie a URL completa da barra de endereços do navegador e cole abaixo.",signInUrl:"Se a aba de login não abriu, clique nesta URL:",label:"Cole a URL de callback aqui",placeholder:"http://localhost:41172/callback?code=...&state=...",submit:"Concluir conexão"},profiles:{title:"Seus perfis do Orca Cloud ({{count}})",refresh:"Atualizar",empty:"Nenhum perfil encontrado na sua conta Orca Cloud ainda."},toast:{connected:"Conectado ao Orca Cloud como {{email}}",disconnected:"Desconectado do Orca Cloud"},errors:{startFailed:"Não foi possível iniciar o login do Orca Cloud.",finishFailed:"Não foi possível concluir o login do Orca Cloud.",passwordFailed:"Não foi possível entrar com esse e-mail e senha.",passwordEmpty:"Insira o e-mail e a senha.",emptyPaste:"Cole a URL de callback do seu navegador.",noCode:"Essa URL não parece ser um callback do Orca Cloud (sem parâmetro code). Copie a URL completa da barra de endereços."}},localProfiles:{title:"Perfis Locais",subtitle:"Importe e gerencie presets de fatiador do OrcaSlicer",import:"Importar Perfis",importDesc:"Solte arquivos .bbscfg, .bbsflmt, .orca_filament, .zip ou .json aqui",importing:"Importando...",search:"Pesquisar presets locais...",noPresets:"Nenhum preset local ainda",noSearchResults:"Nenhum preset corresponde à sua busca",badge:"Local",edit:"Editar",delete:"Excluir",cancel:"Cancelar",deleteConfirmTitle:"Excluir Preset",deleteConfirm:"Tem certeza de que deseja excluir este preset? Esta ação não pode ser desfeita.",source:"Fonte",inheritsFrom:"Herdado de",filamentType:"Tipo",vendor:"Fornecedor",compatiblePrinters:"Impressoras Compatíveis",nozzleTemp:"Temperatura do Bico",cost:"Custo",density:"Densidade",pressureAdvance:"Avanço de Pressão",filament:"Filamento",process:"Processo",printer:"Impressora",toast:{importSuccess:"{{count}} preset(s) importada(s)",importSkipped:"{{count}} preset(s) ignorada(s) (duplicadas)",importError:"{{count}} erro(s) durante a importação",deleted:"Preset excluído",updated:"Preset atualizado"}},connectedAs:"Conectado como",logout:"Sair",noLogoutPermission:"Você não tem permissão para sair",failedToLoad:"Falha ao carregar perfis",retry:"Tentar novamente",time:{justNow:"Agora mesmo",minsAgo:"há {{count}} minutos",hoursAgo:"há {{count}} horas",daysAgo:"há {{count}} dias"},toast:{loggedOut:"Desconectado"},login:{title:"Conectar ao Bambu Cloud",subtitle:"Sincronize seus presets de fatiador entre dispositivos",email:"E-mail",password:"Senha",region:"Região",regionGlobal:"Global",regionChina:"China",verificationCode:"Código de Verificação",totpCode:"Código do Autenticador",checkEmail:"Verifique seu email ({{email}}) para um código de 6 dígitos",enterTotpHint:"Digite o código de 6 dígitos do seu aplicativo autenticador",accessToken:"Token de Acesso",accessTokenHint:"Cole seu token de acesso da Bambu Cloud. Contas da região China precisam usar este caminho (vinculadas ao celular — login por e-mail indisponível). Veja no wiki como obter o token dos cookies do MakerWorld.",back:"Voltar",loginButton:"Entrar",verifyButton:"Verificar",setTokenButton:"Definir Token",useToken:"Usar token de acesso em vez disso",useEmail:"Entrar com email em vez disso",toast:{loggedIn:"Conectado com sucesso",codeSent:"Código de verificação enviado para seu email",enterTotp:"Digite o código do seu aplicativo autenticador",tokenSet:"Token definido com sucesso"}},presets:{myPreset:"Meu preset (editável)",duplicate:"Duplicar",editable:"Editável",failedToLoadDetails:"Falha ao carregar detalhes do preset",deleteConfirm:"Excluir este preset?",deleteWarning:'Isso excluirá permanentemente "{{name}}" do Bambu Cloud. Esta ação não pode ser desfeita.',noDuplicatePermission:"Você não tem permissão para duplicar presets",noEditPermission:"Você não tem permissão para editar presets",noDeletePermission:"Você não tem permissão para excluir presets",types:{filament:"Preset de filamento",printer:"Preset de impressora",process:"Preset de processo"},toast:{deleted:"Preset excluído",created:"Preset criado",updated:"Preset atualizado",duplicated:"Preset duplicado",fieldAdded:'Campo "{{key}}" adicionado',exported:"Preset exportado"},baseLabel:"Base: {{name}}",currentLabel:"Atual: {{name}}",newPreset:"Novo Preset",editPreset:"Editar Preset",duplicatePreset:"Duplicar Preset",createNewPreset:"Criar Novo Preset",customizeSettings:"Personalizar configurações para seu novo preset",compareWithBase:"Comparar com o preset base",compare:"Comparar",basePreset:"Preset Base",selectBasePreset:"Selecionar preset base...",presetName:"Nome do Preset",myCustomPreset:"Meu preset personalizado",inheritsFrom:"Herdado de",dropJsonToImport:"Solte o arquivo JSON para importar",tabs:{common:"Comum",allFields:"Todos os Campos"},availableFields:"Campos Disponíveis",searchFieldsPlaceholder:"Pesquisar campos...",noMatchingFields:"Nenhum campo correspondente",allFieldsAdded:"Todos os campos adicionados",addCustomField:"Adicionar campo personalizado",yourOverrides:"Suas Substituições",noOverridesYet:"Nenhuma substituição ainda",clickFieldsToAdd:"Clique nos campos à esquerda para adicioná-los",saveAsTemplate:"Salvar como modelo",jsonTip:"Dica: Arraste e solte um arquivo .json em qualquer lugar deste modal para importar configurações"},cloudView:{searchPlaceholder:"Pesquisar presets...",templates:"Modelos",refresh:"Atualizar",newPreset:"Novo Preset",clearFilters:"Limpar filtros",compareMode:"Modo de Comparação",selectAnotherPreset:"Selecionar outro preset {{type}}",clickTwoPresets:"Clique em dois presets do mesmo tipo para comparar",selectFirst:"1. Selecionar primeiro",selectSecond:"2. Selecionar segundo",compareNow:"Comparar Agora",lastSynced:"Última sincronização:",showingCount:"Mostrando {{showing}} de {{total}} presets",noPresetsFound:"Nenhum preset encontrado",columns:{filament:"Filamento",process:"Processo",printer:"Impressora"},noFilamentPresets:"Nenhum preset de filamento",noProcessPresets:"Nenhum preset de processo",noPrinterPresets:"Nenhum preset de impressora",filters:{type:"Tipo",owner:"Proprietário",printer:"Impressora",nozzle:"Bico",filament:"Filamento",layer:"Camada",all:"Todos",myPresets:"Meus Presets",builtIn:"Integrado",process:"Processo"},noTemplatesPermission:"Você não tem permissão para gerenciar modelos",noRefreshPermission:"Você não tem permissão para atualizar perfis",noCreatePermission:"Você não tem permissão para criar presets"},templates:{title:"Modelos Rápidos",noTemplates:"Nenhum modelo ainda",createFirst:"Crie modelos a partir do editor de presets",typeFilter:"Tipo:",deleteTitle:"Excluir Modelo",deleteWarning:"Esta ação não pode ser desfeita",deleteConfirm:'Tem certeza de que deseja excluir "{{name}}"?',namePlaceholder:"Nome do modelo",descriptionPlaceholder:"Descrição",settingsJson:"Configurações (JSON)",fieldsCount:"{{count}} campos",shownInModals:"Exibido em modais",hiddenInModals:"Oculto em modais",apply:"Aplicar",toast:{deleted:"Modelo excluído",updated:"Modelo atualizado",created:"Modelo criado",applied:"Modelo aplicado"}}},support:{debugLoggingActive:"Registro de depuração ativo",manageLogs:"Gerenciar",collectItem7:"Conectividade da impressora e versões de firmware",collectItem8:"Status de integração (Spoolman, MQTT, HA)",collectItem9:"Interfaces de rede (somente sub-redes)",collectItem10:"Versões de pacotes Python",collectItem11:"Verificações de integridade do banco de dados",collectItem12:"Detalhes do ambiente Docker",bundleGenerating:"Gerando pacote...",bundleStepConnection:"Executando verificações de conectividade das impressoras",bundleStepVirtualPrinters:"Executando verificações de configuração das impressoras virtuais",bundleStepLogScan:"Analisando registros recentes em busca de problemas conhecidos",bundleStepBuild:"Criando o ZIP do pacote de suporte"},fileManager:{title:"Gerenciador de Arquivos",subtitle:"Organize e gerencie seus arquivos de impressão",uploadFiles:"Enviar Arquivos",newFolder:"Nova Pasta",folderName:"Nome da Pasta",folderNamePlaceholder:"ex.: Peças Funcionais",renameFile:"Renomear Arquivo",renameFolder:"Renomear Pasta",invalidFilenameChar:'O caractere "{{char}}" não é permitido em nomes de arquivos de impressão. O cartão SD da impressora rejeita: < > : " / \\ | ? *',moveFiles:"Mover {{count}} Arquivo(s)",rootNoFolder:"Raiz (Sem Pasta)",current:"Atual",linkFolder:"Vincular Pasta",linkFolderDescription:'Vincular "{{name}}" a um projeto ou arquivo para acesso rápido.',project:"Projeto",archive:"Arquivo",noProjectsFound:"Nenhum projeto encontrado",noArchivesFound:"Nenhum arquivo encontrado",unlink:"Desvincular",link:"Vincular",dragDropFiles:"Arraste e solte os arquivos aqui",dropFilesHere:"Solte os arquivos aqui",orClickToBrowse:"ou clique para procurar",allFileTypesSupported:"Todos os tipos de arquivos são suportados. Arquivos ZIP serão extraídos.",zipFilesDetected:"Arquivos ZIP detectados",zipExtractOptions:"Arquivos ZIP serão extraídos. Escolha como lidar com a estrutura de pastas:",preserveZipStructure:"Preservar estrutura de pastas do ZIP",createFolderFromZip:"Criar pasta a partir do nome do arquivo ZIP",stlThumbnailGeneration:"Geração de miniaturas STL",zipMayContainStl:"Arquivos ZIP podem conter arquivos STL. Miniaturas podem ser geradas durante a extração.",thumbnailsCanBeGenerated:"Miniaturas podem ser geradas para arquivos STL. Modelos grandes podem levar mais tempo para processar.",generateThumbnailsForStl:"Gerar miniaturas para arquivos STL",threemfDetected:"Arquivos 3MF detectados",threemfExtractionInfo:"Modelo da impressora, material, cor e configurações de impressão serão extraídos automaticamente dos arquivos 3MF.",willBeExtracted:"Será extraído",filesExtracted:"{{count}} arquivos extraídos",uploadComplete:"Upload concluído: {{succeeded}} bem-sucedidos",uploadFailed:"Falha no envio",zipFilesFailed:"{{count}} arquivos falharam",uploading:"Enviando...",changeLink:"Alterar link...",linkTo:"Vincular a...",linkToProjectOrArchive:"Vincular a projeto ou arquivo",addToQueue:"Adicionar à fila",schedulePrint:"Agendar impressão",generateThumbnail:"Gerar miniatura",generateThumbnails:"Gerar miniaturas",generateThumbnailsForMissing:"Gerar miniaturas para arquivos STL que não possuem",gridView:"Visualização em grade",listView:"Visualização em lista",lowDiskSpaceWarning:"Aviso de pouco espaço em disco",lowDiskSpaceDetails:"Apenas {{free}} livres de {{total}} no total. O limite está definido para {{threshold}} GB nas configurações.",files:"Arquivos",folders:"Pastas",size:"Tamanho",free:"Livre",allFiles:"Todos os arquivos",allExternal:"Externos",externalIsEmpty:"Nenhum arquivo externo",externalEmptyDescription:"Os arquivos das suas pastas externas vinculadas aparecerão aqui.",wrap:"Quebrar texto",enableTextWrapping:"Ativar quebra de texto",disableTextWrapping:"Desativar quebra de texto",collapse:"Recolher",collapseFoldersByDefault:"Recolher pastas por padrão",expandFoldersByDefault:"Expandir pastas por padrão",dragToResizeTooltip:"Arraste para redimensionar, clique duas vezes para redefinir",searchFiles:"Pesquisar arquivos...",allTypes:"Todos os tipos",prints:"Impressões",ascending:"Crescente",descending:"Decrescente",resultsCount:"{{showing}} de {{total}} arquivos",selectAll:"Selecionar tudo",deselectAll:"Desmarcar tudo",selected:"{{count}} selecionado(s)",adding:"Adicionando...",loadingFiles:"Carregando arquivos...",folderIsEmpty:"A pasta está vazia",noFilesYet:"Nenhum arquivo ainda",folderEmptyDescription:"Envie arquivos ou mova arquivos para esta pasta para começar.",noFilesDescription:"Envie arquivos para começar a organizar seus arquivos relacionados à impressão.",noMatchingFiles:"Nenhum arquivo correspondente",noMatchingFilesDescription:"Nenhum arquivo corresponde aos seus critérios de pesquisa ou filtro.",clearFilters:"Limpar filtros",printedCount:"Impresso {{count}}x",uploadedBy:"Enviado por",deleteFolder:"Excluir pasta",deleteFile:"Excluir arquivo",deleteFilesCount:"Excluir {{count}} arquivos",deleteFolderConfirm:"Tem certeza de que deseja excluir esta pasta? Todos os arquivos dentro também serão excluídos.",deleteFileConfirm:"Tem certeza de que deseja excluir este arquivo?",deleteFilesConfirm:"Tem certeza de que deseja excluir {{count}} arquivos selecionados? Esta ação não pode ser desfeita.",deleting:"Excluindo...",noPermissionRenameFolder:"Você não tem permissão para renomear pastas",noPermissionLinkFolder:"Você não tem permissão para vincular pastas",noPermissionDeleteFolder:"Você não tem permissão para excluir pastas",noPermissionPrint:"Você não tem permissão para imprimir",noPermissionSlice:"Você não tem permissão para fatiar arquivos",noPermissionAddToQueue:"Você não tem permissão para adicionar à fila",noPermissionDownload:"Você não tem permissão para baixar arquivos",noPermissionRenameFile:"Você não tem permissão para renomear este arquivo",noPermissionGenerateThumbnail:"Você não tem permissão para gerar miniaturas",noPermissionDeleteFile:"Você não tem permissão para excluir este arquivo",noPermissionCreateFolder:"Você não tem permissão para criar pastas",noPermissionUpload:"Você não tem permissão para enviar arquivos",noPermissionMoveFiles:"Você não tem permissão para mover arquivos",noPermissionDeleteFiles:"Você não tem permissão para excluir arquivos",linkExternal:"Vincular externo",linkExternalFolder:"Vincular pasta externa",linkExternalFolderDescription:"Montar um diretório do host (NAS, USB, compartilhamento de rede) no Gerenciador de Arquivos. Os arquivos não são copiados — são acessados diretamente do caminho original.",externalFolderNamePlaceholder:"ex. Impressões NAS",externalPath:"Caminho do host",externalPathHelp:"Caminho absoluto do diretório no host Docker. Deve estar montado como bind no contêiner.",readOnly:"Somente leitura",readOnlyHelp:"impede uploads e exclusões",showHiddenFiles:"Mostrar arquivos ocultos (arquivos ponto)",externalFolder:"Pasta externa",scanFolder:"Escanear",toast:{folderCreated:"Pasta criada",folderDeleted:"Pasta excluída",fileDeleted:"Arquivo excluído",filesDeleted:"Excluídos {{count}} arquivos",filesMoved:"Arquivos movidos",folderLinked:"Pasta vinculada",folderUnlinked:"Pasta desvinculada",externalFolderLinked:"Pasta externa vinculada e escaneada",folderScanned:"Escaneamento concluído: {{added}} adicionados, {{removed}} removidos",addedToQueue:"Adicionado {{count}} arquivo(s) à fila",addedToQueuePartial:"Adicionado {{added}} arquivo(s), {{failed}} falharam",failedToAddToQueue:"Falha ao adicionar arquivos: {{error}}",fileRenamed:"Arquivo renomeado",folderRenamed:"Pasta renomeada",thumbnailsGenerated:"Geradas {{count}} miniatura(s)",thumbnailsGeneratedPartial:"Geradas {{succeeded}} miniatura(s), {{failed}} falharam",noStlMissingThumbnails:"Nenhum arquivo STL sem miniatura",failedToGenerateThumbnails:"Falha ao gerar miniaturas: {{error}}",thumbnailGenerated:"Miniatura gerada",failedToGenerateThumbnail:"Falha ao gerar miniatura: {{error}}"}},projects:{title:"Projetos",subtitle:"Organize e acompanhe seus projetos de impressão 3D",newProject:"Novo Projeto",editProject:"Editar Projeto",deleteProject:"Excluir Projeto",projectName:"Nome do Projeto",description:"Descrição",noProjects:"Nenhum projeto ainda",noProjectsFiltered:"Nenhum projeto {{status}}",noProjectsFilteredHelp:"Você não tem nenhum projeto {{status}}. Os projetos aparecerão aqui quando seu status mudar.",createFirst:"Crie seu primeiro projeto para começar a organizar impressões relacionadas, acompanhar o progresso e gerenciar suas construções.",createFirstButton:"Crie Seu Primeiro Projeto",create:"Criar",files:"Arquivos",prints:"Impressões",plates:"Placas",parts:"Peças",lastModified:"Última Modificação",deleteConfirm:"Tem certeza de que deseja excluir este projeto? Arquivos e itens da fila serão desvinculados, mas não excluídos.",addFiles:"Adicionar Arquivos",removeFile:"Remover Arquivo",viewDetails:"Ver Detalhes",namePlaceholder:"ex., Voron 2.4 Build",descriptionPlaceholder:"Descrição opcional...",urlLabel:"URL",urlPlaceholder:"https://makerworld.com/...",urlInvalid:"A URL deve começar com http:// ou https://",openExternalUrl:"Abrir URL do projeto",coverImageLabel:"Imagem de capa",coverImageAlt:"Imagem de capa do projeto",coverImageUpload:"Enviar",coverImageReplace:"Substituir",coverImageRemove:"Remover",color:"Cor",targetPlates:"Placas Alvo",targetPlatesPlaceholder:"ex., 25",targetPlatesHelp:"Número de trabalhos de impressão",targetParts:"Peças Alvo",targetPartsPlaceholder:"ex., 150",targetPartsHelp:"Total de objetos necessários",tagsLabel:"Tags (separadas por vírgula)",tagsPlaceholder:"ex., voron, funcional, presente",dueDate:"Data de Vencimento",priority:"Prioridade",priorityLow:"Baixa",priorityNormal:"Normal",priorityHigh:"Alta",priorityUrgent:"Urgente",statusActive:"Ativo",statusCompleted:"Concluído",statusArchived:"Arquivado",done:"Concluído",completed:"Concluído",failed:"Falhou",inQueue:"Na fila",noPrintsYet:"Nenhuma impressão ainda",printJobs:"Trabalhos de impressão (placas)",partsPrinted:"Peças impressas",failedParts:"Peças falhadas",import:"Importar",export:"Exportar",importProject:"Importar projeto",exportAll:"Exportar todos os projetos",loading:"Carregando projetos...",noEditPermission:"Você não tem permissão para editar projetos",noDeletePermission:"Você não tem permissão para excluir projetos",noCreatePermission:"Você não tem permissão para criar projetos",noImportPermission:"Você não tem permissão para importar projetos",noExportPermission:"Você não tem permissão para exportar projetos",toast:{created:"Projeto criado",updated:"Projeto atualizado",deleted:"Projeto excluído",imported:"Projeto importado",multipleImported:"{{count}} projetos importados",importFailed:"Falha na importação",exported:"Projetos exportados (apenas metadados)"}},projectDetail:{notFound:"Projeto não encontrado",backToProjects:"Voltar para Projetos",export:"Exportar",exportProject:"Exportar projeto",noExportPermission:"Você não tem permissão para exportar projetos",noEditPermission:"Você não tem permissão para editar projetos",partOf:"Parte de:",priorityLabel:"Prioridade:",noPrints:"Nenhuma impressão neste projeto ainda",status:{active:"Ativo",completed:"Concluído",archived:"Arquivado"},priority:{low:"Baixa",normal:"Normal",high:"Alta",urgent:"Urgente"},dueDate:{overdue:"Atrasado",today:"Vence hoje",daysLeft:"{{count}} dias restantes"},progress:{platesProgress:"Progresso das Placas",partsProgress:"Progresso das Peças",printJobs:"Trabalhos de Impressão",parts:"Peças",percentComplete:"{{percent}}% concluído",remaining:"{{count}} restantes"},stats:{printJobs:"Trabalhos de Impressão",total:"total",failed:"{{count}} falhou",partsPrinted:"{{count}} peças impressas",printTime:"Tempo de Impressão",filamentUsed:"Filamento Usado"},cost:{title:"Rastreamento de Custos",filamentCost:"Custo do Filamento",energy:"Energia",totalCost:"Custo Total",total:"Total",includesBom:"incl. lista de materiais",budget:"Orçamento",remaining:"Restante"},subProjects:{title:"Sub-projetos ({{count}})"},notes:{title:"Notas",noEditPermission:"Você não tem permissão para editar notas",placeholder:"Adicione notas sobre este projeto...",empty:"Nenhuma nota ainda. Clique em Editar para adicionar notas."},files:{title:"Arquivos",linkFolders:"Vincular pastas do Gerenciador de Arquivos",forQuickAccess:"a este projeto para acesso rápido.",fileCount:"{{count}} arquivo(s)",empty:"Nenhuma pasta vinculada. Vá para o Gerenciador de Arquivos e vincule uma pasta a este projeto.",noFiles:"Nenhum arquivo nesta pasta.",print:"Imprimir agora",addToQueue:"Adicionar à fila"},bom:{title:"Lista de Materiais",acquired:"{{completed}}/{{total}} adquiridos",showAll:"Mostrar todos",hideDone:"Ocultar concluídos",addPart:"Adicionar Peça",noAddPermission:"Você não tem permissão para adicionar peças",partNamePlaceholder:"Nome da peça (ex.: parafusos M3x8)",partName:"Nome da peça",qty:"Quantidade",price:"Preço ({{currency}})",sourcingUrlPlaceholder:"URL de fornecimento (opcional)",remarksPlaceholder:"Observações (opcional)",deletePart:"Excluir Peça",deleteConfirm:'Tem certeza de que deseja excluir "{{name}}"?',noUpdatePermission:"Você não tem permissão para atualizar peças",noEditPermission:"Você não tem permissão para editar peças",noDeletePermission:"Você não tem permissão para excluir peças",totalCost:"Custo total:",empty:"Nenhuma peça na lista de materiais. Adicione hardware, eletrônicos ou outros componentes para rastrear o que precisa ser adquirido."},timeline:{title:"Linha do Tempo de Atividades",empty:"Nenhuma atividade ainda."},template:{saveAsTemplate:"Salvar como Modelo",noCreatePermission:"Você não tem permissão para criar modelos"},queue:{title:"Fila",viewAll:"Ver todos",printing:"{{count}} imprimindo",queued:"{{count}} na fila"},prints:{title:"Impressões ({{count}})"},toast:{projectUpdated:"Projeto atualizado",partAdded:"Peça adicionada",partRemoved:"Peça removida",exportFailed:"Falha na exportação",projectExported:"Projeto exportado",templateCreated:"Modelo criado"}},system:{title:"Informações do Sistema",version:"Versão",uptime:"Tempo de Atividade",cpuUsage:"Uso da CPU",memoryUsage:"Uso da Memória",diskUsage:"Uso do Disco",networkInfo:"Informações de Rede",logs:"Registros",debugMode:"Modo de Depuração",enableDebug:"Ativar Registro de Depuração",disableDebug:"Desativar Registro de Depuração",downloadLogs:"Baixar Logs",clearLogs:"Limpar Logs",dockerInfo:"Informações do Docker",containerName:"Nome do Contêiner",imageName:"Nome da Imagem",platform:"Plataforma",architecture:"Arquitetura"},library:{title:"Biblioteca de Filamentos",addFilament:"Adicionar Filamento",editFilament:"Editar Filamento",deleteFilament:"Excluir Filamento",vendor:"Fornecedor",material:"Material",color:"Cor",kFactor:"Fator K",temperature:"Temperatura",noFilaments:"Nenhum filamento na biblioteca",deleteConfirm:"Tem certeza de que deseja excluir este filamento?",importFromPrinter:"Importar da Impressora",exportToFile:"Exportar para Arquivo"},slice:{title:"Fatiar modelo",action:"Fatiar",actionAll:"Fatiar todas as {{count}} bandejas",actionAllTitle:"Fatiar todas as bandejas em uma saída multi-bandeja única (um único arquivo). A seleção de filamento cobre cada slot definido pelo projeto.",allPlatesToggle:"Fatiar todas as {{count}} bandejas",slicing:"Fatiando…",printer:"Perfil de impressora",process:"Perfil de processo",filament:"Perfil de filamento",filamentSlot:"Filamento {{index}} ({{type}})",selectPreset:"— Selecione uma predefinição —",loadingPresets:"Carregando predefinições…",analyzingPlateFilaments:"Analisando filamentos da mesa…",analyzingPlateFilamentsHint:"Executando uma fatia de pré-visualização para descobrir quais slots AMS esta mesa usa. Cacheado depois — reabrir é instantâneo.",previewToast:"Analisando {{name}} – {{elapsed}}",previewWithProgress:"Analisando {{name}} – {{stage}} ({{percent}}%) – {{elapsed}}",notUsedByPlate:"— não usado por esta mesa",noPresetsForSlot:"Nenhuma predefinição disponível",otherPrinters:"Outras impressoras",presetsLoadFailed:"Falha ao carregar predefinições. Abra Configurações → Perfis para importá-las primeiro.",refreshPresets:"Atualizar",refreshPresetsTitle:"Atualizar predefinições — buscar as listagens mais recentes da nuvem e dos pacotes (use após excluir uma predefinição no Bambu Studio ou Bambu Handy)",allPresetsRequired:"Todas as predefinições devem ser selecionadas",bundle:"Pacote do fatiador",bundleNone:"— Nenhum (escolher predefinições individualmente) —",bundleAllRequired:"O processo do pacote e cada slot de filamento devem ser escolhidos",enqueuing:"Enviando trabalho de fatiamento…",queued:"Na fila…",failed:"Falha ao fatiar. Verifique os logs do sidecar.",startedToast:"Fatiando {{name}} em segundo plano…",queuedToast:"Na fila: {{name}} – {{elapsed}}",runningToast:"Fatiando {{name}} – {{elapsed}}",runningWithProgress:"{{name}} – {{stage}} ({{percent}}%) – {{elapsed}}",runningWithProgressMultiPlate:"Bandeja {{plateIndex}} de {{plateCount}} • {{name}} – {{stage}} ({{percent}}%) – {{elapsed}}",completedToast:"{{name}} fatiado",failedTitle:"Falha ao fatiar",failedToast:"Falha ao fatiar {{name}}: {{detail}}",tier:{local:"Importado",cloud:"Bambu Cloud",orcaCloud:"Orca Cloud",standard:"Padrão"},cloud:{notAuthenticated:"Faça login no Bambu Cloud (Configurações → Perfis → Bambu Cloud) para ver as predefinições.",expired:"Sessão do Bambu Cloud expirou – faça login novamente para atualizar as predefinições.",unreachable:"Bambu Cloud está inacessível agora. Predefinições locais e padrão ainda funcionam."},orcaCloud:{notAuthenticated:"Entre no Orca Cloud (Perfis → Orca Cloud) para ver seus presets Orca.",expired:"Sessão do Orca Cloud expirada — entre novamente para atualizar seus presets Orca.",unreachable:"Orca Cloud está indisponível no momento. Outros presets continuam funcionando."},bedType:{label:"Mesa de impressão",auto:"Auto (usar predefinição de processo)",coolPlate:"Cool Plate",coolPlateSuperTack:"Cool Plate SuperTack",engineering:"Engineering Plate",highTemp:"High Temp Plate",texturedPEI:"Textured PEI Plate",smoothPEI:"Smooth PEI Plate"}},spoolman:{title:"Integração com Spoolman",enabled:"Spoolman Ativado",url:"URL do Spoolman",connected:"Conectado",disconnected:"Não Conectado",testConnection:"Testar Conexão",sync:"Sincronizar",syncing:"Sincronizando...",lastSync:"Última Sincronização",linkToSpoolman:"Vincular ao Spoolman",openInSpoolman:"Abrir no Spoolman",unlinkSpool:"Desvincular Carretel",unlinkConfirmTitle:"Remover atribuição do carretel?",unlinkConfirmMessage:"Isso removerá o carretel deste slot. Os dados do próprio carretel permanecerão inalterados.",selectSpool:"Selecionar Carretel",noUnlinkedSpools:"Nenhum carretel não atribuído disponível",linkSuccess:"Carretel atribuído com sucesso",linkFailed:"Falha ao atribuir carretel",unlinkSuccess:"Atribuição do carretel removida com sucesso",unlinkFailed:"Falha ao remover atribuição do carretel",linkedSpool:"Carretel atribuído",spoolId:"Carretel ID (Spool ID)",fillSourceLabel:"(Spoolman)",weight:"Peso",remaining:"Restante",disableWeightSync:"Desativar Sincronização de Peso Estimado do AMS",disableWeightSyncDesc:"Não atualize a capacidade restante a partir das estimativas do AMS. Use isso se preferir o rastreamento de uso do Spoolman em vez das estimativas baseadas em porcentagem do AMS. Novos carretéis ainda usarão a estimativa do AMS como seu peso inicial.",reportPartialUsage:"Relatar Uso Parcial para Impressões Falhadas",reportPartialUsageDesc:"Quando uma impressão falha ou é cancelada, relate o filamento estimado usado até aquele ponto com base no progresso das camadas."},inventory:{title:"Inventário de Carretéis",subtitle:"Gerencie seus carretéis",spoolmanMixedContentTitle:"Spoolman não pode carregar em HTTPS — conteúdo misto bloqueado pelo navegador",spoolmanMixedContentBody:"O Bambuddy é servido via HTTPS (pelo seu reverse proxy), mas a URL do Spoolman ainda é HTTP. Os navegadores bloqueiam conteúdo misto por segurança, então a interface embutida do Spoolman não consegue carregar. O Spoolman também precisa estar acessível via HTTPS.",spoolmanMixedContentFixReverseProxy:"Coloque o Spoolman atrás do mesmo reverse proxy do Bambuddy (Traefik / Nginx / Caddy) com HTTPS e atualize a URL do Spoolman em Configurações com o novo endereço HTTPS.",spoolmanMixedContentFixOpenNewTab:"Como alternativa, abra o Spoolman em uma nova aba via HTTP — as regras de conteúdo misto só se aplicam a frames embutidos, uma aba independente funciona normalmente.",spoolmanOpenInNewTab:"Abrir Spoolman em nova aba",labels:{title:"Imprimir etiquetas de bobinas",selectedCount:"{{count}} selecionado",pickSpools:"Escolha para quais bobinas imprimir etiquetas:",searchPlaceholder:"Buscar por nome, marca ou #ID",filterByMaterial:"Material:",allMaterials:"Tudo",selectVisible:"Selecionar todos visíveis ({{count}})",deselectVisible:"Desmarcar visíveis",clearAll:"Limpar tudo",noSpoolsToShow:"Nenhuma bobina para mostrar. Ajuste o filtro e tente novamente.",noMatches:"Nenhuma bobina corresponde à pesquisa ou filtro atual.",printOne:"Imprimir etiqueta desta bobina",printLabels:"Imprimir etiquetas…",bulkTitle:"Escolha bobinas para etiquetar entre as {{count}} exibidas",noSpoolsTitle:"Nenhuma bobina para rotular",error:"Não foi possível gerar etiquetas: {{msg}}",sortBy:{label:"Ordenar:",id:"Por ID",color:"Por cor"},templates:{amsHolderSmall:{label:"Suporte AMS — pequeno (74 × 33 mm)",hint:"Uma etiqueta por página; corresponde à etiqueta imprimível do modelo MakerWorld 752566 (Suporte de etiquetas de filamento AMS)."},amsHolderLarge:{label:"Suporte AMS — grande (75 × 55 mm)",hint:"Uma etiqueta por página; encaixa na variante com inserto em cartão do Suporte de etiquetas de filamento AMS. Espaço suficiente para amostra de cor, marca, material, ID e QR code."},box40x30:{label:"Etiqueta de caixa (40 × 30 mm)",hint:"Uma etiqueta por página; tamanho comum de rolo DK/Brother, ideal para etiquetar sacos de filamento e caixas de armazenamento."},box:{label:"Box label (62 × 29 mm)",hint:"Uma etiqueta por página; tamanho para Brother PT/QL e etiquetas pequenas Dymo."},averyL7160:{label:"Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)",hint:"Formato de folha UE; 21 etiquetas por página A4."},avery5160:{label:"Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)",hint:"Formato de folha US; 30 etiquetas por página Letter."}}},addSpool:"Adicionar Carretel",editSpool:"Editar Carretel",copySpool:"Copiar Carretel",material:"Material",selectMaterial:"Selecionar material...",subtype:"Subtipo",brand:"Marca",searchBrand:"Pesquisar marca...",useCustomBrand:'Usar "{{brand}}"',useCustomMaterial:"Usar material personalizado: {{material}}",colorName:"Nome da Cor",colorNamePlaceholder:"Branco Jade, Vermelho Fogo...",color:"Cor",hexColor:"Cor Hexadecimal",pickColor:"Escolher cor personalizada",labelWeight:"Peso da Etiqueta",coreWeight:"Peso do Carretel Vazio",searchSpoolWeight:"Pesquisar peso do carretel...",weightUsed:"Usado",currentWeight:"Peso Restante",measuredWeight:"Peso Medido",spoolName:"Bobina",costPerKg:"Custo por kg",storageLocation:"Local de armazenamento",storageLocationPlaceholder:"ex. Prateleira A, Gaveta 1",openInInventory:"Abrir no inventário",measuredWeightError:"O peso medido deve estar entre {{min}}g e {{max}}g.",slicerFilament:"Filamento do Fatiador",slicerFilamentName:"Nome do Predefinido do Fatiador",slicerPreset:"Predefinido do Fatiador",searchPresets:"Pesquisar predefinições de filamento...",selectedPreset:"Selecionado",noPresetsFound:"Nenhuma predefinição encontrada",tempOverrides:"Substituições de Temperatura",note:"Nota",notePlaceholder:"Quaisquer notas adicionais sobre este spool...",category:"Categoria",categoryPlaceholder:"ex. Produção, Protótipo, Cliente A",categoryNone:"Sem categoria",storageLocationNone:"Sem local definido",lowStockThresholdOverride:"Limite de estoque baixo (este carretel)",lowStockThresholdOverrideHelp:"Deixe em branco para usar o limite global ({{global}}%).",clearRfid:"Limpar tag RFID",rfidCleared:"Tag RFID limpa",archive:"Arquivar",restore:"Restaurar",noSpools:"Nenhum carretel ainda. Adicione seu primeiro carretel para começar.",noAvailableSpools:"Nenhum carretel disponível. Adicione um carretel ao seu inventário ou desatribua um de outro slot primeiro.",kProfiles:"K-Perfis",addKProfile:"Adicionar K-Perfil",assignSpool:"Atribuir Carretel",unassignSpool:"Desatribuir",assignSuccess:"Carretel atribuído e slot AMS configurado",assignFailed:"Falha ao atribuir carretel",selectSpool:"Selecione um carretel para atribuir a este slot",assigned:"Atribuído",assigning:"Atribuindo...",searchSpools:"Pesquisar carretéis...",showAllSpools:"Mostrar todos os carretéis",spoolmanSpools:"Bobinas Spoolman",allMaterials:"Todos os Materiais",filterByBrand:"Filtrar por marca...",showArchived:"Mostrar arquivados",quickAdd:"Adição rápida (Estoque)",quantity:"Quantidade",stock:"Estoque",configured:"Configurado",spoolsCreated:"{{count}} carretéis criados",spoolsPartiallyCreated:"{{created}} de {{total}} carretéis criados (alguns falharam)",spoolCreated:"Carretel criado",spoolUpdated:"Carretel atualizado",spoolDeleted:"Carretel excluído",deepLinkSpoolNotFound:"Carretel não encontrado",deepLinkFetchFailed:"Não foi possível carregar o carretel — tente novamente",spoolArchived:"Carretel arquivado",spoolRestored:"Carretel restaurado",kProfileSaveFailed:"Não foi possível salvar as configurações do perfil K",syncWeightSpoolNotFound:"Carretel não encontrado — pode ter sido excluído",syncWeightSpoolmanUnreachable:"Spoolman está inacessível — tente novamente mais tarde",syncWeightFailed:"Falha ao sincronizar o peso",spoolmanUnreachable:"Spoolman está inacessível — tente novamente mais tarde",deleteSpoolNotFound:"Carretel não encontrado — pode já ter sido excluído",deleteFailed:"Falha ao excluir carretel",archiveSpoolNotFound:"Carretel não encontrado — pode já ter sido excluído",archiveFailed:"Falha ao arquivar carretel",restoreSpoolNotFound:"Carretel não encontrado — pode já ter sido excluído",restoreFailed:"Falha ao restaurar carretel",saveFailed:"Falha ao salvar as alterações",tagClearFailed:"Falha ao limpar a tag",deleteConfirm:"Tem certeza de que deseja excluir este carretel? Esta ação não pode ser desfeita.",archiveConfirm:"Tem certeza de que deseja arquivar este carretel?",advancedSettings:"Configurações Avançadas",filamentInfoTab:"Informações do Filamento",paProfileTab:"Perfil PA",filamentInfo:"Filamento",additional:"Adicional",loadingPresets:"Carregando predefinições da nuvem...",cloudConnected:"Nuvem conectada",cloudNotConnected:"Nuvem não conectada (usando padrões)",recentColors:"Recentes",searchColors:"Pesquisar cores...",searchResults:"Resultados da pesquisa",allColors:"Todas as cores",commonColors:"Cores comuns",showLess:"Mostrar menos",showAll:"Mostrar tudo",noColorsFound:"Nenhuma cor corresponde à sua pesquisa",noResults:"Nenhum resultado encontrado",extraColorsLabel:"Cores extras",extraColorsPlaceholder:"EC984C,#6CD4BC,A66EB9,D87694",extraColorsHint:"Cole 2 a 8 paradas hex, separadas por vírgulas. Renderizado como gradiente.",extraColorsInvalid:"Hex inválidos ignorados: {{tokens}}",colorEffectLabel:"Efeito",colorEffect:{none:"Nenhum",sparkle:"Brilho",wood:"Madeira",marble:"Mármore",glow:"Brilho",matte:"Fosco",silk:"Silk",galaxy:"Galáxia",rainbow:"Arco-íris",metal:"Metal",translucent:"Translúcido",gradient:"Gradiente",dualColor:"Dupla cor",triColor:"Tricolor",multicolor:"Multicolor"},selectMaterialFirst:"Por favor, selecione um material primeiro na aba Informações do Filamento.",noPrintersConfigured:"Nenhuma impressora configurada. Adicione impressoras para usar perfis PA.",matchingFilter:"Correspondente",anyBrand:"Qualquer marca",anyVariant:"Qualquer variante",autoSelect:"Seleção automática",matches:"correspondências",match:"correspondência",noMatches:"Nenhuma correspondência",connected:"Conectado",offline:"Offline",printerOffline:"A impressora está offline. Conecte-se para visualizar os perfis de calibração.",noKProfilesMatch:"Nenhum K-perfil corresponde ao filamento selecionado.",leftNozzle:"Bico Esquerdo",rightNozzle:"Bico Direito",profilesSelected:"perfil(is) de calibração selecionado(s)",totalInventory:"Inventário Total",totalConsumed:"Total Consumido",byMaterial:"Por Material",inPrinter:"Na Impressora",lowStock:"Estoque Baixo",sinceTracking:"Desde o início do rastreamento",resetConsumedCounter:"Zerar contador",resetConsumedCounterTooltip:"Zerar o contador de gramas consumidas desta bobina. O peso restante não é alterado.",resetConsumedCounterConfirm:"Zerar o contador de gramas consumidas desta bobina? As impressões futuras voltarão a contar do zero. A bobina em si, o cálculo do peso restante e as configurações não são alterados.",resetAllConsumedCounters:"Zerar todos os contadores",resetAllConsumedCountersTooltip:"Zerar o contador de gramas consumidas em todas as bobinas. Os pesos restantes não são alterados.",resetAllConsumedCountersConfirm:'Zerar o contador de gramas consumidas nas {{count}} bobinas (incluindo as arquivadas)? Isso limpa o "Total Consumido" para que as impressões futuras contem do zero. Bobinas e pesos restantes não são alterados.',consumedCounterReset:"Contador zerado",allConsumedCountersReset:"Contador zerado em {{count}} bobina(s)",resetConsumedCounterFailed:"Falha ao zerar o contador",loadedInAms:"Carregado no AMS/Ext",remaining:"Restante",weightCheck:"Verificação de Peso",lastWeighed:"Última pesagem",neverWeighed:"Nunca pesado",search:"Pesquisar carretéis...",showing:"Mostrando",to:"até",of:"de",show:"Mostrar",spools:"carretéis",spool:"carretel",page:"Página",noSpoolsMatch:"Nenhum resultado encontrado",noSpoolsMatchDesc:"Tente ajustar sua pesquisa ou filtros para encontrar o que você está procurando.",active:"Ativo",archived:"Arquivado",all:"Todos",used:"Usado",new:"Novo",clearFilters:"Limpar filtros",table:"Tabela",cards:"Cartões",net:"Líquido",groupSimilar:"Agrupar",groupedSpools:"{{count}} carretéis idênticos",groupedRows:"linhas",columns:"Colunas",configureColumns:"Configurar Colunas",configureColumnsDesc:"Arraste para reordenar as colunas ou use as setas. Alterne a visibilidade com o ícone de olho.",visible:"Visível",reset:"Redefinir",cancel:"Cancelar",applyChanges:"Aplicar Alterações",moveUp:"Mover para cima",moveDown:"Mover para baixo",hideColumn:"Ocultar coluna",showColumn:"Mostrar coluna",linkToSpool:"Vincular ao Carretel",tagLinked:"Tag vinculada ao carretel",tagLinkFailed:"Falha ao vincular tag",tagAlreadyLinked:"Tag já vinculada a outro carretel",unknownTag:"Tag RFID desconhecida detectada",usageHistory:"Histórico de Uso",noUsageHistory:"Nenhum uso registrado ainda",printName:"Nome da Impressão",weightConsumed:"Peso Consumido",clearHistory:"Limpar",historyCleared:"Histórico de uso limpo",fillSourceLabel:"(Inv)",lowStockThresholdError:"O limite deve estar entre 0.1 e 99.9",assignMismatchTitle:"Incompatibilidade de material",assignMismatchMessage:'O material do carretel selecionado "{{spoolMaterial}}" não corresponde ao material da bandeja "{{trayMaterial}}" para {{location}}. Atribuir mesmo assim?',assignMismatchConfirm:"Atribuir mesmo assim",assignPartialMismatchMessage:'O material do carretel "{{spoolMaterial}}" é semelhante, mas não corresponde exatamente a "{{trayMaterial}}" em {{location}}. Deseja prosseguir?',assignProfileMismatchMessage:'O perfil do carretel "{{spoolProfile}}" não corresponde ao perfil da bandeja "{{trayProfile}}" em {{location}}. Deseja prosseguir?',assignReconfigureNote:"O slot do AMS será reconfigurado para usar o perfil do carretel.",spoolmanFilamentCatalog:"Catálogo de filamentos Spoolman",pickFromSpoolmanCatalog:"Escolher do catálogo Spoolman…",spoolmanFilamentSelected:"Filamento selecionado do catálogo Spoolman",spoolmanFilamentUnlinked:"Vínculo com o catálogo de filamentos removido",noSpoolmanFilaments:"Nenhum filamento encontrado no catálogo Spoolman",spoolmanFilamentColorSwatch:"Cor do filamento",spoolWeightManagedBySpoolman:"O peso do carretel vazio é gerenciado por tipo de filamento no Spoolman",spoolmanCatalogLoadFailed:"Falha ao carregar catálogo de filamentos do Spoolman"},timelapse:{title:"Timelapse",create:"Criar Timelapse",download:"Baixar",delete:"Excluir",preview:"Visualizar",frameRate:"Taxa de Quadros",quality:"Qualidade",processing:"Processando...",noTimelapses:"Nenhum timelapse disponível"},ams:{title:"AMS",slot:"Slot",empty:"Vazio",emptySlot:"Slot vazio",slotEmpty:"Vazio",emptySlotReset:"Nenhum carretel atribuído",unknown:"Desconhecido",humidity:"Umidade",temperature:"Temperatura",filamentType:"Tipo de Filamento",filamentColor:"Cor",remaining:"Restante",history:"Histórico do AMS",noHistory:"Nenhum histórico disponível",configureSlot:"Configurar Slot",externalSpool:"Carretel Externo",profile:"Perfil",kFactor:"Fator K",fill:"Preencher",configure:"Configurar",used:"usado",remainingUnit:"restante"},printModal:{title:"Iniciar Impressão",selectPrinter:"Selecionar Impressora",selectPlate:"Selecionar Placa",filamentMapping:"Mapeamento de Filamento",totalCost:"Custo total:",slotRemainingShort:" - {{grams}}g rest.",printSettings:"Configurações de Impressão",bedLeveling:"Nivelamento da Mesa",flowCalibration:"Calibração de Fluxo",vibrationCalibration:"Calibração de Vibração",layerInspection:"Inspeção da Primeira Camada",timelapse:"Timelapse",startPrint:"Iniciar Impressão",addToQueue:"Adicionar à Fila",cancel:"Cancelar",noPrintersAvailable:"Nenhuma impressora disponível",printerBusy:"Impressora ocupada",printerOffline:"Impressora offline",sameTypeDifferentColor:"Mesmo tipo, cor diferente",filamentTypeNotLoaded:"Tipo de filamento não carregado",openCalendar:"Abrir calendário",leftNozzle:"L",rightNozzle:"R",leftNozzleTooltip:"Bico esquerdo",rightNozzleTooltip:"Bico direito",filamentOverride:"Substituição de Filamento",filamentOverrideHint:"Substitua opcionalmente os filamentos para atribuição baseada em modelo. O agendador usará os filamentos selecionados em vez dos valores originais do 3MF.",originalFilament:"Original",overrideWith:"Substituir por",resetToOriginal:"Restaurar original",insufficientFilamentTitle:"Filamento insuficiente",insufficientFilamentMessage:"Alguns dos carretéis atribuídos têm menos filamento restante do que o necessário para esta impressão:",insufficientFilamentLine:"{{printer}} - {{slot}}: necessário {{required}}g, restante {{remaining}}g",printAnyway:"Imprimir mesmo assim",forceColorMatch:"Forçar correspondência de cor",staggerPrinterStarts:"Escalonar inícios",staggerGroupSize:"Tamanho do grupo",staggerInterval:"Intervalo (min)",staggerPreview:"{{printers}} impressoras → {{groups}} grupos de {{size}}, iniciando a cada {{interval}} min",staggerLastGroup:"último grupo: {{count}}",staggerTotal:"total: {{minutes}} min",staggerToPrinters:"Escalonar para {{count}} impressoras",gcodeInjection:"Injetar G-code de auto-impressão"},backup:{includesEncryptionKey:"Backups locais incluem o arquivo da chave de criptografia MFA (DATA_DIR/.mfa_encryption_key), então o backup ZIP é autossuficiente. Trate o ZIP como sensível — quem tiver o arquivo pode descriptografar os client secrets OIDC e os segredos TOTP armazenados.",title:"Bakup e Restauração",createBackup:"Criar Backup",restoreBackup:"Restaurar Backup",restoreDescription:"Substituir todos os dados a partir de um arquivo de backup",downloadBackup:"Baixar Backup",uploadBackup:"Enviar Backup",lastBackup:"Último Backup",autoBackup:"Backup automático",backupNow:"Fazer Backup Agora",restoreWarning:"Aviso: Restaurar um backup substituirá todos os dados atuais.",includeArchives:"Incluir Arquivos",includeSettings:"Incluir Configurações",includeProfiles:"Incluir Perfis",backupSuccess:"Backup criado com sucesso",restoreSuccess:"Backup restaurado com sucesso",backupFailed:"Falha ao criar backup",restoreFailed:"Falha ao restaurar backup",restoreNote:"A impressora virtual será parada durante a restauração",githubBackup:"Backup GitHub",enabled:"Ativado",cloudLoginRequired:"Login no Bambu Cloud necessário. Entre em Perfis → Perfis Cloud para ativar o backup GitHub.",cloudLoginRequiredShort:"Login Cloud necessário",githubDescription:"Sincronize automaticamente seus perfis com um repositório GitHub privado para backup e histórico de versões.",repoIsPrivate:"O repositório é privado — seguro para backup.",repoIsPublicWarning:"O repositório está PÚBLICO. Os backups do Bambuddy incluem credenciais MQTT, tokens do Home Assistant, tokens do Prometheus, seu e-mail do Bambu Cloud e os códigos de acesso das impressoras via K-profiles. Salvar está bloqueado até que você torne o repositório privado nas configurações do seu provedor.",repoVisibilityUnknown:"Não foi possível determinar a visibilidade do repositório. O Bambuddy se recusa a fazer backup em qualquer destino não confirmado como privado; salvar será bloqueado.",repositoryUrl:"URL do repositório",repoUrlPlaceholderGitHub:"https://github.com/username/repo-name",repoUrlPlaceholderGitea:"https://gitea.example.com/username/repo-name",repoUrlPlaceholderForgejo:"https://forgejo.example.com/username/repo-name",repoUrlPlaceholderGitLab:"https://gitlab.com/username/repo-name",allowInsecureHttp:"Permitir HTTP inseguro",allowInsecureHttpHint:"Ativar para instâncias auto-hospedadas em redes privadas sem TLS",personalAccessToken:"Token de acesso pessoal",tokenSaved:"(salvo)",enterNewToken:"Digite um novo token para atualizar",tokenHint:"Token de granularidade fina com permissão de leitura/escrita de conteúdo",branch:"Branch",provider:"Provedor Git",providerGitHub:"GitHub",providerGitLab:"GitLab",providerGitea:"Gitea",providerForgejo:"Forgejo",manualOnly:"Apenas manual",hourly:"A cada hora",daily:"Diário",weekly:"Semanal",includeInBackup:"Incluir no backup",kProfiles:"K-Perfis",kProfilesDescription:"Calibração de avanço de pressão das impressoras conectadas",noPrintersConnected:"Nenhuma impressora conectada",printersConnected:"{{connected}}/{{total}} conectadas",cloudProfiles:"Perfis Cloud",cloudProfilesDescription:"Predefinições de filamento, impressora e processo do Bambu Cloud",appSettings:"Configurações do App",appSettingsDescription:"Configuração do Bambuddy (banco de dados completo)",spoolInventory:"Inventário de bobinas",spoolInventoryDescription:"Bobinas de filamento, histórico de uso e rastreamento de custos",printArchives:"Arquivos de impressão",printArchivesDescription:"Metadados do histórico de impressão (sem arquivos gcode/3MF)",lastBackupAt:"Último backup:",noBackupsYet:"Nenhum backup ainda",next:"Próximo:",startingBackup:"Iniciando backup...",test:"Testar",enableBackup:"Ativar backup",testConnection:"Testar conexão",enterRepoUrl:"Digite a URL do repositório",enterRepoAndToken:"Digite a URL do repositório e o token de acesso",repoRequired:"A URL do repositório é obrigatória",tokenRequired:"O token de acesso é obrigatório",githubBackupEnabled:"Backup GitHub ativado",tokenUpdated:"Token atualizado",settingsSaved:"Configurações salvas",failedToSave:"Falha ao salvar: {{message}}",backupCompleteFiles:"Backup concluído - {{count}} arquivos atualizados",backupSkippedNoChanges:"Backup ignorado - sem alterações",backupFailed2:"Falha no backup: {{message}}",clearedLogs:"{{count}} logs removidos",failedToClearLogs:"Falha ao limpar logs: {{message}}",history:"Histórico",clear:"Limpar",date:"Data",status:"Status",commit:"Commit",localBackup:"Backup local",localBackupDescription:"Crie um backup completo dos seus dados do Bambuddy incluindo banco de dados, arquivos, uploads e todos os ficheiros.",downloadBackupLabel:"Baixar backup",completeBackupZip:"Backup completo: banco de dados + todos os arquivos (ZIP)",download:"Baixar",preparingBackup:"Preparando backup...",creatingArchive:"Criando arquivo de backup... Isso pode demorar para backups grandes.",downloadingFile:"Baixando arquivo de backup...",backupDownloaded:"Backup baixado com sucesso",failedToCreateBackup:"Falha ao criar backup: {{message}}",restore:"Restaurar",restoreReplacesAll:"A restauração substitui todos os dados.",restoreReplacesAllDetail:"Seu banco de dados e arquivos atuais serão completamente substituídos. É necessário reiniciar após a restauração.",restoreConfirmTitle:"Restaurar backup",restoreConfirmMessage:'Tem certeza de que deseja restaurar de "{{filename}}"? Isso substituirá completamente seu banco de dados e todos os arquivos. O aplicativo precisará ser reiniciado após a restauração.',restoreConfirmButton:"Restaurar backup",uploadingFile:"Enviando arquivo de backup...",backupRestoredRestart:"Backup restaurado. Por favor, reinicie o Bambuddy.",failedToRestore:"Falha ao restaurar backup. Verifique o formato do arquivo.",reloadNow:"Recarregar agora",creatingBackup:"Criando backup",restoringBackup:"Restaurando backup",preparing:"Preparando...",processing:"Processando...",doNotClosePage:"Por favor, não feche esta página nem navegue para outro lugar. Esta operação pode levar vários minutos para backups grandes.",restoring:"Restaurando...",restoreComplete:"Restauração concluída",restoreFailed2:"Falha na restauração",importSettings:"Importar configurações de um arquivo de backup",pleaseWaitRestoring:"Aguarde enquanto seus dados estão sendo restaurados",selectBackupFile:"Clique para selecionar um arquivo de backup (.json ou .zip)",duplicateHandling:"Como funciona o tratamento de duplicatas:",matchPrinters:"Impressoras",matchPrintersBy:"correspondência por número de série",matchSmartPlugs:"Tomadas inteligentes",matchSmartPlugsBy:"correspondência por endereço IP",matchNotificationProviders:"Provedores de notificação",matchNotificationProvidersBy:"correspondência por nome",matchFilaments:"Filamentos",matchFilamentsBy:"correspondência por nome + tipo + marca",matchArchives:"Arquivos",matchArchivesBy:"correspondência por hash de conteúdo (sempre ignorado)",matchPendingUploads:"Uploads pendentes",matchPendingUploadsBy:"correspondência por nome do arquivo",matchSettingsTemplates:"Configurações e modelos",matchSettingsTemplatesBy:"sempre sobrescritos",replaceExisting:"Substituir dados existentes",keepExisting:"Manter dados existentes",overwriteDescription:"Sobrescrever itens que já existem com dados do backup",keepDescription:"Restaurar apenas itens que ainda não existem",overwriteCaution:"Cuidado:",overwriteWarning:"A sobrescrita substituirá suas configurações atuais pelos dados do backup. Códigos de acesso das impressoras nunca são sobrescritos por segurança.",cancel:"Cancelar",processingBackup:"Processando arquivo de backup...",itemsRestored:"Itens restaurados",itemsSkipped:"Itens ignorados",restored:"Restaurados",skippedAlreadyExist:"Ignorados (já existem)",filesCategory:"Arquivos (3MF, miniaturas, etc.)",andMore:"...e mais {{count}}",newApiKeysGenerated:"Novas chaves API geradas",keysShownOnce:"Estas chaves são exibidas apenas uma vez. Copie-as agora!",copy:"Copiar",noDataFound:"Nenhum dado para restaurar foi encontrado no arquivo de backup.",close:"Fechar",scheduledBackup:"Backups agendados",scheduledBackupDescription:"Cria automaticamente snapshots de backup conforme agendamento. O diretório de saída pode ser montado em um NAS ou armazenamento externo.",frequency:"Frequência",backupTime:"Tempo",retention:"Retenção",retentionDescription:"Número de backups a manter",outputPath:"Caminho de saída",outputPathPlaceholder:"Padrão: {{path}}",outputPathDescription:"Deixe em branco para o local padrão",runNow:"Executar agora",backupFiles:"Arquivos de backup",noScheduledBackups:"Sem backups ainda",deleteBackup:"Excluir",deleteBackupConfirm:"Excluir este arquivo de backup?",backupRunning:"Backup em andamento...",scheduledBackupComplete:"Backup concluído com sucesso",scheduledBackupFailed:"Falha no backup",nextBackup:"Próximo backup",backupSize:"Tamanho",localTimeHint:"Horário local ({{tz}})",defaultPathLabel:"Padrão:",categories:{settings:"Configurações",notification_providers:"Provedores de notificação",notification_templates:"Modelos de notificação",smart_plugs:"Tomadas inteligentes",printers:"Impressoras",filaments:"Filamentos",maintenance_types:"Tipos de manutenção",archives:"Arquivos",projects:"Projetos",pending_uploads:"Uploads pendentes",external_links:"Links externos",api_keys:"Chaves API"}},tags:{title:"Etiquetas",addTag:"Adicionar Tag",editTag:"Editar Tag",deleteTag:"Excluir Tag",tagName:"Nome da Tag",tagColor:"Cor da Tag",noTags:"Nenhuma tag",deleteConfirm:"Tem certeza de que deseja excluir esta tag?",manageTags:"Gerenciar Tags"},uploadModal:{title:"Upload Arquivos 3MF",dragDrop:"Arraste e solte arquivos .3mf aqui",or:"ou",browseFiles:"Procurar Arquivos",extractionInfo:"O modelo da impressora será extraído automaticamente dos metadados do arquivo 3MF.",uploaded:"enviado",failed:"falhou",uploading:"Enviando...",upload:"Enviar",uploadFailed:"Falha no envio"},editArchive:{title:"Editar Arquivo",name:"Nome",namePlaceholder:"Nome da impressão",printer:"Impressora",noPrinter:"Nenhuma impressora",project:"Projeto",noProject:"Nenhum projeto",itemsPrinted:"Itens Impressos",itemsPrintedHelp:"Número de itens produzidos neste trabalho de impressão",notes:"Notas",notesPlaceholder:"Adicione notas sobre esta impressão...",externalLink:"Link Externo",externalLinkPlaceholder:"https://printables.com/model/...",externalLinkHelp:"Link para Printables, Thingiverse ou outra fonte",tags:"Etiquetas",tagsPlaceholder:"Adicionar tags...",addMoreTags:"Adicionar mais tags...",matchingTags:'Correspondendo "{{query}}"',existingTags:"Tags existentes",clickToAdd:"(clique para adicionar)",status:"Status",failureReason:"Motivo da Falha",selectReason:"Selecione o motivo...",photos:"Fotos do Resultado da Impressão",photosHelp:"Clique em + para adicionar fotos do seu resultado impresso",printResult:"Resultado da Impressão",saving:"Salvando...",failureReasons:{adhesionFailure:"Falha de adesão",spaghettiDetached:"Spaghetti / Destacado",layerShift:"Deslocamento de camada",cloggedNozzle:"Bico entupido",filamentRunout:"Fim do filamento",warping:"Empenamento",stringing:"Fios",underExtrusion:"Subextrusão",powerFailure:"Falha de energia",userCancelled:"Cancelado pelo usuário",other:"Outro"},statuses:{completed:"Concluído",failed:"Falhou",aborted:"Cancelado",printing:"Imprimindo"}},kProfiles:{title:"Perfis K",noPrintersConfigured:"Nenhuma impressora configurada",addPrinterInSettings:"Adicione uma impressora nas Configurações para gerenciar K-profiles",noActivePrinters:"Nenhuma impressora ativa",enablePrinterConnection:"Ative a conexão da impressora para visualizar seus K-profiles",loadingProfiles:"Carregando K-Profiles...",printerOffline:"Impressora Offline",printerOfflineDesc:"A impressora selecionada não está conectada. Ligue-a para visualizar os K-profiles.",noMatchingProfiles:"Nenhum Perfil Correspondente",noMatchingProfilesDesc:"Nenhum perfil corresponde aos seus critérios de pesquisa",noKProfiles:"Nenhum K-Profile",noKProfilesDesc:"Nenhum perfil de avanço de pressão encontrado para bico de {{diameter}}mm",createFirstProfile:"Criar Primeiro Perfil",printer:"Impressora",nozzle:"Bico",refresh:"Atualizar",addProfile:"Adicionar Perfil",export:"Exportar",import:"Importar",select:"Selecionar",selectAll:"Selecionar Todos",delete:"Excluir",searchPlaceholder:"Pesquisar por nome ou filamento...",allExtruders:"Todos os Extrusores",leftOnly:"Apenas Esquerdo",rightOnly:"Apenas Direito",allFlow:"Todo Fluxo",hfOnly:"Apenas HF",sOnly:"Apenas S",sortName:"Ordenar: Nome",sortKValue:"Ordenar: Valor K",sortFilament:"Ordenar: Filamento",leftExtruder:"Extrusor Esquerdo",rightExtruder:"Extrusor Direito",modal:{addTitle:"Adicionar K-Profile",editTitle:"Editar K-Profile",profileName:"Nome do Perfil",profileNamePlaceholder:"Meu Perfil PLA",kValue:"Valor K",kValuePlaceholder:"0.020",kValueHelp:"Faixa típica: 0.01 - 0.06 para PLA, 0.02 - 0.10 para PETG",filament:"Filamento",selectFilament:"Selecionar filamento...",noFilamentsHelp:"Nenhum filamento encontrado. Crie um K-profile no Bambu Studio primeiro.",flowType:"Tipo de Fluxo",highFlow:"Alto Fluxo",standard:"Padrão",nozzleSize:"Tamanho do Bico",extruder:"Extrusor",extruders:"Extrusores",left:"Esquerdo",right:"Direito",notes:"Notas (armazenadas localmente)",notesPlaceholder:"Adicione notas sobre este perfil...",notesHelp:"As notas são salvas no Bambuddy, não na impressora",syncing:"Sincronizando com a impressora...",savingExtruder:"Salvando no extrusor {{current}}/{{total}}...",pleaseWait:"Por favor, aguarde"},deleteConfirm:{title:"Excluir Perfil",cannotUndo:"Isso não pode ser desfeito",message:'Tem certeza de que deseja excluir "{{name}}" da impressora?'},bulkDelete:{title:"Excluir Perfis",cannotUndo:"Isso não pode ser desfeito",message:"Tem certeza de que deseja excluir {{count}} perfis selecionados da impressora?"},toast:{profileSaved:"K-profile salvo",profilesSaved:"K-profile salvo em {{count}} extrusores",selectAtLeastOneExtruder:"Por favor, selecione pelo menos um extrusor",profileDeleted:"K-profile excluído",profilesDeleted:"{{count}} perfis excluídos",exportedProfiles:"{{count}} perfis exportados",importedProfiles:"{{count}} de {{total}} perfis importados",noProfilesToExport:"Nenhum perfil para exportar",invalidFileFormat:"Formato de arquivo inválido",failedToParseImport:"Falha ao analisar o arquivo de importação",failedToSaveBatch:"Falha ao salvar K-profiles",noteSaved:"Nota salva",failedToSaveNote:"Falha ao salvar nota"},permission:{noRead:"Você não tem permissão para atualizar perfis",noCreate:"Você não tem permissão para adicionar perfis",noUpdate:"Você não tem permissão para atualizar K-profiles",noDelete:"Você não tem permissão para excluir K-profiles",noExport:"Você não tem permissão para exportar perfis",noImport:"Você não tem permissão para importar perfis"}},virtualPrinter:{title:"Impressora Virtual",running:"Em execução",stopped:"Parada",description:{default:"Ative uma impressora virtual que aparece no Bambu Studio e no OrcaSlicer. Os arquivos enviados para esta impressora serão arquivados diretamente sem impressão.",proxy:"Ative um proxy que retransmite o tráfego do slicer para uma impressora real, permitindo impressão remota em qualquer rede."},enable:{title:"Ativar Impressora Virtual",visibleInSlicer:'Visível como "Bambuddy" na descoberta do slicer',proxyingTo:"Proxy para {{name}}",notActive:"Não ativo"},model:{title:"Modelo da Impressora",description:"Selecione qual modelo de impressora emular.",restartWarning:"Alterar o modelo reiniciará a impressora virtual"},accessCode:{title:"Código de acesso",isSet:"O código de acesso está definido",notSet:"Nenhum código de acesso definido — necessário para ativar.",placeholder:"Digite um código de 8 caracteres",placeholderChange:"Digite um novo código para alterar",hint:"Deve ter exatamente 8 caracteres. Usado pelos slicers para autenticação.",charCount:"({{count}}/8)"},targetPrinter:{title:"Impressora Alvo",configured:"Proxy alvo configurado",notConfigured:"Nenhuma impressora alvo selecionada - necessário para o modo proxy",placeholder:"Selecione uma impressora...",hint:"Selecione a impressora para a qual o tráfego do slicer será enviado. A impressora deve estar no modo LAN.",noPrinters:"Nenhuma impressora configurada. Adicione uma impressora primeiro para usar o modo proxy."},remoteInterface:{title:"Substituição da Interface de Rede",configured:"Substituição da interface ativa",optional:"Opcional - use se o IP detectado automaticamente estiver errado (por exemplo, várias NICs, Docker, VPN)",placeholder:"Detecção automática (padrão)...",hint:"Substitua o endereço IP anunciado via SSDP e usado no certificado TLS. Útil quando o Bambuddy possui várias interfaces de rede."},mode:{title:"Modo",archive:"Arquivar",archiveDesc:"Arquivar arquivos imediatamente",review:"Revisar",reviewDesc:"Revisar antes de arquivar",queue:"Fila",queueDesc:"Arquivar e adicionar à fila",proxy:"Proxy",proxyDesc:"Retransmitir para impressora real"},autoDispatch:{title:"Envio automático",description:"Iniciar impressões automaticamente quando adicionadas à fila. Quando desativado, as impressões aguardam envio manual."},queueForceColorMatch:{title:"Forçar correspondência de cor",description:"Recusa enviar para uma impressora que não tenha exatamente o tipo e cor de filamento carregados. Desativado por padrão — sem isto, a fila usa apenas correspondência por modelo e pode escolher uma impressora com a cor errada carregada."},tailscaleDisabled:{title:"Integração Tailscale",description:"Ative para marcar este VP como exposto via Tailscale. Mostra o endereço Tailscale do host para você saber qual IP colar no fatiador. A etapa de importação CA é inalterada — este toggle não afeta certificados."},setupRequired:{title:"Configuração Necessária",description:"O recurso de impressora virtual requer configuração adicional do sistema antes de funcionar. Isso inclui encaminhamento de portas, regras de firewall e configurações específicas da plataforma.",readGuide:"Leia o guia de configuração antes de ativar"},howItWorks:{title:"Como funciona",step1:"Complete o guia de configuração para sua plataforma",step2:"Ative a impressora virtual e defina um código de acesso",step3:'No Bambu Studio ou OrcaSlicer, vá para "Adicionar Impressora"'},status:{title:"Detalhes do Status",printerName:"Nome da Impressora",model:"Modelo",serialNumber:"Número de Série",mode:"Modo",pendingFiles:"Arquivos Pendentes",targetPrinter:"Impressora Alvo",ftpPort:"Porta FTP",mqttPort:"Porta MQTT",ftpConnections:"Conexões FTP",mqttConnections:"Conexões MQTT"},toast:{updated:"Configurações da impressora virtual atualizadas",failedToUpdate:"Falha ao atualizar as configurações",copyFailed:"Falha ao copiar — selecione o texto manualmente",accessCodeRequired:"Defina um código de acesso primeiro",targetPrinterRequired:"Selecione uma impressora alvo primeiro",bindIpRequired:"Defina um IP de ligação primeiro",accessCodeEmpty:"O código de acesso não pode estar vazio",accessCodeLength:"O código de acesso deve ter exatamente 8 caracteres",created:"Impressora virtual criada",failedToCreate:"Falha ao criar impressora virtual",deleted:"Impressora virtual excluída",failedToDelete:"Falha ao excluir impressora virtual"},list:{title:"Impressoras Virtuais",add:"Adicionar",addFirst:"Adicionar Impressora Virtual",empty:"Nenhuma impressora virtual configurada. Adicione uma para começar."},bindIp:{title:"Interface de Rede",placeholder:"Selecionar interface...",hint:"Interface de rede para esta impressora virtual. Deve ser única por impressora."},proxy:{accessCodeHint:"No modo proxy, use o código de acesso da impressora alvo no slicer. A conexão é encaminhada de forma transparente para a impressora real."},addDialog:{title:"Adicionar Impressora Virtual",name:"Nome",hint:"Você pode configurar o código de acesso, impressora alvo e outras configurações após a criação.",create:"Criar"},deleteConfirm:{title:"Excluir Impressora Virtual",message:'Tem certeza que deseja excluir "{{name}}"? Isso irá parar todos os serviços desta impressora.'},archiveNameSource:{title:"Origem do nome do arquivo",description:'Escolha como os novos arquivos são nomeados quando chegam pela impressora virtual. "Metadados" usa o título embutido pelo slicer no 3MF (padrão). "Nome do arquivo" usa o nome que o Bambu Studio enviou via FTP — útil se você renomeou o job no diálogo "enviar para impressora".',metadata:"Metadados",filename:"Nome do arquivo"},caCert:{title:"Certificado do slicer",description:"As impressoras virtuais usam um certificado TLS assinado pela CA do Bambuddy. Importe este certificado CA para o armazenamento de confiança do seu slicer uma única vez para que ele aceite a conexão — sem precisar copiá-lo pela linha de comando.",copy:"Copiar",copied:"Copiado",download:"Baixar",fingerprint:"SHA-256"}},modelViewer:{openInSlicer:"Abrir no Slicer",tabs:{model:"Modelo 3D",gcode:"Pré-visualização G-code"},notAvailable:"Não disponível",notSliced:"Não fatiado",plates:"Placas",allPlates:"Todas as Placas",plateNumber:"Placa {{number}}",plateCount:"{{count}} placa",plateCount_other:"{{count}} placas",objectCount:"{{count}} objeto",objectCount_other:"{{count}} objetos",filamentCount:"{{count}} filamento",filamentCount_other:"{{count}} filamentos",eta:"ETA {{minutes}} min",noPreview:"Pré-visualização não disponível para este arquivo",pagination:{pageOf:"Página {{current}} de {{total}}",prev:"Anterior",next:"Próximo"},errors:{failedToLoad:"Falha ao carregar o arquivo",noMeshes:"Nenhuma malha encontrada no arquivo 3MF",unsupportedFormat:"Formato de arquivo não suportado"}},maintenanceDescriptions:{lubricateCarbonRods:"Aplique lubrificante nos eixos de carbono para um movimento suave",lubricateRails:"Aplique lubrificante nos trilhos lineares para um movimento suave",cleanNozzle:"Limpe o hotend e o bico para evitar entupimentos",checkBelts:"Verifique a tensão das correias para impressões precisas",cleanBuildPlate:"Limpe a placa de construção para melhor adesão",checkExtruder:"Verifique as engrenagens do extrusor quanto ao desgaste",checkCooling:"Verifique se os ventiladores de resfriamento estão funcionando corretamente",generalInspection:"Inspeção geral da impressora",cleanCarbonRods:"Limpe os eixos de carbono para reduzir o atrito",lubricateSteelRods:"Aplique lubrificante nas barras de aço para um movimento suave",cleanSteelRods:"Limpe as barras de aço para reduzir o atrito",cleanLinearRails:"Limpe os trilhos lineares para remover poeira e detritos",checkPtfeTube:"Verifique o tubo PTFE quanto ao desgaste ou danos",replaceHepaFilter:"Substitua o filtro HEPA para qualidade do ar",replaceCarbonFilter:"Substitua o filtro de carbono ativado",lubricateLeftNozzleRail:"Lubrifique o trilho do bico esquerdo (série H2)"},smartPlugs:{offline:"Offline",admin:"Administrador",openPlugAdminPage:"Abrir o painel de administração da tomada inteligente",deleteSmartPlug:"Excluir Tomada Inteligente",turnOnSmartPlug:"Ligar Tomada Inteligente",turnOffSmartPlug:"Desligar Tomada Inteligente",turnOn:"Ligar",turnOff:"Desligar",addSmartPlug:{scanningNetwork:"Procurando na rede...",chooseEntity:"Escolha uma entidade...",connectionFailed:"Falha na conexão",searchEntities:"Pesquisar entidades...",searchPowerSensors:"Pesquisar sensores de energia...",searchEnergySensors:"Pesquisar sensores de energia...",placeholders:{plugName:"Tomada da Sala",mqttStateOnValue:"ON, true, 1",mqttSameAsPower:"Mesmo que o tópico de energia, ou diferente"}},linkedTo:"Vinculado a:",monitorOnly:"Apenas monitoramento",alerts:"Alertas",scheduleOn:"Ligar {{time}}",scheduleOff:"Desligar {{time}}",on:"Ligado",off:"Desligado",power:"Potência",kwhToday:"kWh Hoje",settings:"Configurações",automationSettings:"Configurações de automação",showInSwitchbar:"Mostrar na barra de interruptores",quickAccessSidebar:"Acesso rápido pela barra lateral",enabled:"Ativado",enableAutomation:"Ativar automação para este plugue",autoOn:"Auto Ligar",autoOnDescription:"Ligar quando a impressão iniciar",autoOff:"Auto Desligar",autoOffDescription:"Desligar quando a impressão terminar (única vez)",autoOffPersistent:"Manter ativado",autoOffPersistentDescription:"Permanecer ativado entre impressões em vez de única vez",autoOffAfterDrying:"Desligar Após Secagem",autoOffAfterDryingDescription:"Desligar quando a secagem do AMS terminar",delayAfterDryingMinutes:"Atraso após secagem (minutos)",turnOffDelayMode:"Modo de atraso para desligar",time:"Tempo",temp:"Temp.",delayMinutes:"Atraso (minutos)",tempThreshold:"Limite de temperatura (°C)",tempThresholdDescription:"Desliga quando o bico esfria abaixo desta temperatura",edit:"Editar",deleteConfirm:'Tem certeza que deseja excluir "{{name}}"? Esta ação não pode ser desfeita.',turnOnConfirm:'Tem certeza que deseja ligar "{{name}}"?',turnOffConfirm:'Tem certeza que deseja desligar "{{name}}"? Isso cortará a energia do dispositivo conectado.',failedToTurn:'Falha ao {{action}} "{{name}}"',unknown:"Desconhecido",addTitle:"Adicionar plugue inteligente",editTitle:"Editar plugue inteligente",stopScanning:"Parar varredura",discoverTasmota:"Descobrir dispositivos Tasmota",foundDevices:"{{count}} dispositivo(s) encontrado(s) - clique para selecionar:",noDevicesFound:"Nenhum dispositivo Tasmota encontrado na sua rede",haNotConfigured:"Home Assistant não está configurado. Configure em",haSettingsPath:"Configurações → Rede → Home Assistant",selectEntity:"Selecionar entidade *",ipAddress:"Endereço IP *",nameLabel:"Nome *",username:"Usuário",password:"Senha",authHint:"Deixe vazio se seu dispositivo Tasmota não requer autenticação",linkToPrinter:"Vincular à impressora",noPrinter:"Sem impressora (apenas controle manual)",linkingDescription:"A vinculação permite ligar/desligar automaticamente ao iniciar/terminar impressão",powerAlerts:"Alertas de potência",alertAbove:"Alertar se acima (W)",alertBelow:"Alertar se abaixo (W)",alertDescription:"Receba notificações quando o consumo de energia ultrapassar estes limites. Deixe vazio para desativar essa direção.",dailySchedule:"Programação diária",turnOnAt:"Ligar às",turnOffAt:"Desligar às",scheduleDescription:"Ligar/desligar automaticamente o plugue nestes horários diariamente. Deixe vazio para pular essa ação.",showOnPrinterCard:"Mostrar no cartão da impressora",displayOnPrinterCard:"Exibir botão no cartão da impressora",connectedResult:"Conectado!",deviceLabel:"Dispositivo: {{name}} - ",stateLabel:"Estado: {{state}}",test:"Testar",delete:"Excluir",save:"Salvar",add:"Adicionar",cancel:"Cancelar",failedToStartScan:"Falha ao iniciar varredura",nameRequired:"Nome é obrigatório",entityRequired:"Entidade é obrigatória para plugues Home Assistant",mqttTopicRequired:"Pelo menos um tópico MQTT deve ser configurado para potência, energia ou monitoramento de estado",loadingEntities:"Carregando entidades...",loading:"Carregando...",failedToLoadEntities:"Falha ao carregar entidades: {{error}}",noEntitiesMatching:'Nenhuma entidade encontrada correspondente a "{{search}}"',noEntitiesAvailable:"Nenhuma entidade disponível",searchingEntities:"Buscando todas as entidades ({{count}} encontradas)",showingEntities:"Mostrando switch, light, input_boolean ({{count}} disponíveis)",energyMonitoringOptional:"Monitoramento de energia (Opcional)",energyMonitoringHint:"Pesquise e selecione sensores que fornecem dados de potência/energia.",powerSensorW:"Sensor de potência (W)",energyTodayKwh:"Energia hoje (kWh)",totalEnergyKwh:"Energia total (kWh)",noMatchingSensors:"Nenhum sensor correspondente",none:"Nenhum",mqttNotConfigured:"Broker MQTT não configurado. Defina o endereço do broker em",mqttSettingsPath:"Configurações → Rede → Publicação MQTT",mqttNotConfiguredSuffix:"(você não precisa ativar a publicação, apenas preencha os detalhes do broker).",mqttMonitorOnlyDescription:"Plugues MQTT recebem dados de potência/energia via assinatura MQTT. O controle liga/desliga não está disponível - use seu broker MQTT ou sistema de automação residencial.",powerMonitoring:"Monitoramento de potência",energyMonitoring:"Monitoramento de energia",stateMonitoring:"Monitoramento de estado",optional:"opcional",topic:"Tópico",jsonPath:"Caminho JSON",multiplier:"Multiplicador",onValue:"Valor ON",mqttPowerHint:`O caminho JSON extrai o valor do payload JSON (ex: "power_l1"). Deixe vazio se o tópico publica valores numéricos brutos.
 Use multiplicador 0.001 para mW→W, 1000 para kW→W.`,mqttEnergyHint:`O caminho JSON extrai o valor do payload JSON. Deixe vazio para valores brutos.
 Use multiplicador 0.001 para Wh→kWh, 1000 para MWh→kWh.`,mqttStateHint:`O caminho JSON extrai o valor do payload JSON. Deixe vazio para valores brutos.
-Valor ON: a string exata que significa "ON". Deixe vazio para detecção automática (ON, true, 1).`,restControl:"Controle",restOnUrl:"URL para ligar",restOffUrl:"URL para desligar",restOnBody:"Corpo da requisição ON",restOffBody:"Corpo da requisição OFF",restMethod:"Método HTTP",restHeaders:"Custom Headers (JSON)",restStatusUrl:"URL de status",restStatusPath:"Caminho JSON de estado",restStatusOnValue:"Valor ON",restPowerUrl:"URL de potência",restPowerPath:"Caminho JSON de energia",restPowerMultiplier:"Multiplicador de potência",restEnergyUrl:"URL de energia",restEnergyPath:"Caminho JSON de energia",restEnergyMultiplier:"Multiplicador de energia",restUrlRequired:"Ao menos uma URL (ON ou OFF) é necessária para tomadas REST",restHeadersHint:'ex. {"Authorization": "Bearer your-token"}',restBodyHint:'ex. ON, {"state": "on"}',restStatusHint:"URL para consultar o estado atual",restPathHint:"ex. state ou data.power.status",restPowerUrlHint:"URL separada para dados de potência (usa a URL de status se vazio)",restEnergyUrlHint:"URL separada para dados de energia (usa a URL de status se vazio)",restEnergyHint:"Cada valor pode usar sua própria URL ou recorrer à URL de status. Use multiplicadores para conversão de unidades (ex: 0.001 para converter Wh em kWh).",testConnection:"Testar conexão",connectionSuccess:"Conexão bem-sucedida",noSwitchesInSwitchbar:"Nenhum interruptor na barra",enableSwitchbarHint:'Ative "Mostrar na barra de interruptores" em Configurações > Smart Plugs'},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"E-mail",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"Notificações por e-mail SMTP",telegram:"Notificações via bot do Telegram",discord:"Enviar para canal do Discord via webhook",ntfy:"Notificações push gratuitas e auto-hospedáveis",pushover:"Notificações push simples e confiáveis",callmebot:"Notificações gratuitas via WhatsApp pelo CallMeBot",webhook:"POST HTTP genérico para qualquer URL",homeassistant:"Notificações persistentes no painel do Home Assistant"},lastSuccess:"Último: {{date}}",error:"Erro",printer:"Impressora:",allPrinters:"Todas as impressoras",sendTestNotification:"Enviar Notificação de Teste",eventSettings:"Configurações de Eventos",enabled:"Ativado",sendFromProvider:"Enviar notificações deste provedor",printEvents:"Eventos de Impressão",printerStatus:"Status da Impressora",amsAlarms:"Alarmes do AMS",amsHtAlarms:"Alarmes do AMS-HT",printQueue:"Fila de Impressão",start:"Início",plateCheck:"Verificação da Mesa",complete:"Concluído",failed:"Falhou",stopped:"Parado",progress:"Progresso",offline:"Offline",lowFilament:"Filamento Baixo",maintenance:"Manutenção",amsHumidity:"Umidade do AMS",amsTemp:"Temp. do AMS",amsHtHumidity:"Umidade do AMS-HT",amsHtTemp:"Temp. do AMS-HT",bedCooled:"Mesa Resfriada",firstLayer:"Primeira camada",quiet:"Silencioso",digest:"Resumo {{time}}",printStarted:"Impressão Iniciada",plateNotEmpty:"Mesa Não Vazia",plateNotEmptyDescription:"Objetos detectados antes da impressão",printCompleted:"Impressão Concluída",bedCooledLabel:"Mesa Resfriada",bedCooledDescription:"Mesa resfriou abaixo do limite após a impressão",firstLayerCompleteLabel:"Primeira camada concluída",firstLayerCompleteDescription:"Notificar com foto quando a primeira camada terminar",missingSpoolAssignmentLabel:"Atribuição de bobina ausente",missingSpoolAssignmentDescription:"Notificar quando a impressão iniciar e bandejas necessárias não tiverem bobina atribuída",printFailed:"Impressão Falhou",printStopped:"Impressão Parada",progressMilestones:"Marcos de Progresso",progressMilestonesDescription:"Notificar em 25%, 50%, 75%",printerOffline:"Impressora Offline",printerError:"Erro da Impressora",lowFilamentLabel:"Filamento Baixo",maintenanceDue:"Manutenção Necessária",maintenanceDueDescription:"Notificar quando manutenção for necessária",amsHumidityHigh:"Umidade Alta do AMS",amsHumidityHighDescription:"Umidade do AMS regular excede o limite",amsTemperatureHigh:"Temperatura Alta do AMS",amsTemperatureHighDescription:"Temperatura do AMS regular excede o limite",amsHtHumidityHigh:"Umidade Alta do AMS-HT",amsHtHumidityHighDescription:"Umidade do AMS-HT excede o limite",amsHtTemperatureHigh:"Temperatura Alta do AMS-HT",amsHtTemperatureHighDescription:"Temperatura do AMS-HT excede o limite",inventoryAlerts:"Alertas de Estoque",stockReorderAlert:"Alerta de Reposição",stockReorderAlertDescription:"O SKU atingiu seu ponto de reposição",stockBreakAlert:"Alerta de Ruptura de Estoque",stockBreakAlertDescription:"O estoque se esgotará antes da chegada do reabastecimento",jobAdded:"Trabalho Adicionado",jobAddedDescription:"Trabalho adicionado à fila",jobAssigned:"Trabalho Atribuído",jobAssignedDescription:"Trabalho baseado em modelo atribuído à impressora",jobStarted:"Trabalho Iniciado",jobStartedDescription:"Trabalho da fila começou a imprimir",jobWaiting:"Trabalho Aguardando",jobWaitingDescription:"Trabalho aguardando filamento ou impressora",jobSkipped:"Trabalho Pulado",jobSkippedDescription:"Trabalho pulado (anterior falhou)",jobFailed:"Trabalho Falhou",jobFailedDescription:"Trabalho falhou ao iniciar",queueComplete:"Fila Concluída",queueCompleteDescription:"Todos os trabalhos da fila finalizados",quietHours:"Horário de Silêncio",noNotificationsDuring:"Sem notificações durante essas horas",editProviderToChangeQuietHours:"Edite o provedor para alterar o horário de silêncio",dailyDigest:"Resumo Diário",batchNotifications:"Agrupar notificações em um único resumo diário",sendAt:"Enviar às {{time}}",editProviderToChangeDigestTime:"Edite o provedor para alterar o horário do resumo",edit:"Editar",deleteProvider:"Excluir Provedor de Notificação",deleteConfirm:'Tem certeza que deseja excluir "{{name}}"? Isso não pode ser desfeito.',delete:"Excluir",addTitle:"Adicionar Provedor de Notificação",editTitle:"Editar Provedor de Notificação",nameLabel:"Nome *",namePlaceholder:"Minhas Notificações",providerTypeLabel:"Tipo de Provedor *",configuration:"Configuração",testConfiguration:"Testar Configuração",printerFilter:"Filtro de Impressora",onlyFromPrinter:"Enviar notificações apenas para eventos desta impressora",quietHoursDnd:"Horário de Silêncio (Não Perturbe)",quietStart:"Início",quietEnd:"Fim",dailyDigestLabel:"Resumo Diário",sendDigestAt:"Enviar resumo às",digestCollected:"Os eventos serão coletados e enviados como um único resumo neste horário",notificationEvents:"Eventos de Notificação",progressPercent:"(25%, 50%, 75%)",bedCooledAfterPrint:"(após conclusão da impressão)",eventPriority:{sectionTitle:"Prioridade ntfy",helpNtfy:"Escolha uma prioridade para cada evento habilitado. O ntfy usa isso para escalar alertas (som, visibilidade, comportamento push). Níveis não definidos aqui usam o padrão do servidor ntfy.",min:"Mín",low:"Baixa",default:"Padrão",high:"Alta",urgent:"Urgente"},cancel:"Cancelar",save:"Salvar",add:"Adicionar",nameRequired:"Nome é obrigatório",fieldRequired:"{{field}} é obrigatório",phoneNumber:"Número de Telefone",apiKey:"Chave da API",serverUrl:"URL do Servidor",topic:"Tópico",authToken:"Token de Autenticação",userKey:"Chave do Usuário",appToken:"Token do Aplicativo",priority:"Prioridade",botToken:"Token do Bot",chatId:"ID do Chat",smtpServer:"Servidor SMTP",smtpPort:"Porta SMTP",security:"Segurança",authentication:"Autenticação",username:"Usuário",password:"Senha",fromEmail:"E-mail de Origem",toEmail:"E-mail de Destino",webhookUrl:"URL do Webhook",payloadFormat:"Formato do Payload",authorization:"Autorização",titleFieldName:"Nome do Campo de Título",messageFieldName:"Nome do Campo de Mensagem",editTemplate:"Editar Modelo: {{name}}",titleLabel:"Título",bodyLabel:"Corpo",titlePlaceholder:"Título da notificação...",bodyPlaceholder:"Corpo da notificação...",availableVariables:"Variáveis Disponíveis",clickToInsert:"Clique para inserir na posição do cursor no corpo",livePreview:"Pré-visualização ao Vivo",hide:"Ocultar",show:"Mostrar",loadingPreview:"Carregando pré-visualização...",enterTemplateContent:"Insira o conteúdo do modelo para ver a pré-visualização",titlePreview:"Título:",bodyPreview:"Corpo:",resetToDefault:"Restaurar Padrão",titleRequired:"Título é obrigatório",bodyRequired:"Corpo é obrigatório",notificationLog:"Registro de Notificações",showFailedOnly:"Apenas falhas",last24Hours:"Últimas 24 horas",last7Days:"Últimos 7 dias",last30Days:"Últimos 30 dias",last90Days:"Últimos 90 dias",justNow:"Agora mesmo",noFailedNotifications:"Nenhuma notificação com falha",noNotificationsLogged:"Nenhuma notificação registrada",unknownProvider:"Provedor Desconhecido",logTitle:"Título",logMessage:"Mensagem",logError:"Erro",logProvider:"Provedor: {{type}}",logTime:"Hora: {{time}}",refresh:"Atualizar",clearOld:"Limpar Antigos",statsSummary:"Últimos {{days}} dias:",statsNotifications:"notificações",statsSent:"{{count}} enviadas",statsFailed:"{{count}} com falha",eventTypes:{print_start:"Impressão Iniciada",print_complete:"Impressão Concluída",print_failed:"Impressão Falhou",print_stopped:"Impressão Parada",print_progress:"Progresso",printer_offline:"Impressora Offline",printer_error:"Erro da Impressora",filament_low:"Filamento Baixo",maintenance_due:"Manutenção Necessária",test:"Teste"},userEmail:{title:"Notificações",emailNotifications:"Notificações por E-mail",emailNotificationsDesc:"Receba notificações por e-mail para seus próprios trabalhos de impressão. Os e-mails são enviados usando as configurações SMTP definidas na Autenticação Avançada.",sendingTo:"As notificações serão enviadas para",noEmailWarning:"Sua conta não tem um endereço de e-mail. Entre em contato com um administrador para adicionar um.",printJobNotifications:"Notificações de Trabalhos de Impressão",printJobNotificationsDesc:"Escolha quais eventos acionam notificações por e-mail para os trabalhos de impressão que você envia.",printJobStarts:"Início do Trabalho de Impressão",printJobStartsDesc:"Ser notificado quando seu trabalho de impressão começar.",printJobFinishes:"Conclusão do Trabalho de Impressão",printJobFinishesDesc:"Ser notificado quando seu trabalho de impressão concluir com sucesso.",printErrors:"Erros de Impressão",printErrorsDesc:"Ser notificado quando seu trabalho de impressão falhar ou encontrar um erro.",printJobStops:"Trabalho de Impressão Parado",printJobStopsDesc:"Ser notificado quando seu trabalho de impressão for cancelado ou parado.",saveSuccess:"Preferências de notificação salvas.",saveError:"Falha ao salvar preferências de notificação."}},richTextEditor:{bold:"Negrito",italic:"Itálico",underline:"Sublinhado",bulletList:"Lista com marcadores",numberedList:"Lista numerada",alignLeft:"Alinhar à esquerda",alignCenter:"Centralizar",alignRight:"Alinhar à direita",addLink:"Adicionar link",removeLink:"Remover link"},externalLinks:{noLinksConfigured:"Nenhum link externo configurado",deleteLink:"Excluir link",removeCustomIcon:"Remover ícone personalizado",openInNewTab:"Abrir em nova aba",placeholders:{linkName:"Meu Link"}},keyboardShortcuts:{title:"Atalhos de Teclado",navigation:"Navegação",archivesSection:"Arquivos",kProfilesSection:"Perfis K",generalSection:"Geral",shortcuts:{goToPrinters:"Ir para Impressoras",goToArchives:"Ir para Arquivos",goToQueue:"Ir para Fila",goToStats:"Ir para Estatísticas",goToProfiles:"Ir para Perfis na Nuvem",goToSettings:"Ir para Configurações",focusSearch:"Focar na pesquisa",openUploadModal:"Abrir modal de upload",clearSelection:"Limpar seleção / desfocar input",contextMenu:"Menu de contexto nos cartões",refreshProfiles:"Atualizar perfis",newProfile:"Novo perfil",exitSelectionMode:"Sair do modo de seleção",showHelp:"Mostrar esta ajuda"},footer:"Pressione Esc ou clique fora para fechar"},notificationLog:{title:"Registro de Notificações",events:{printStarted:"Impressão Iniciada",printComplete:"Impressão Concluída",printFailed:"Impressão Falhou",printStopped:"Impressão Interrompida",progress:"Progresso",printerOffline:"Impressora Offline",printerError:"Erro na Impressora",lowFilament:"Filamento Baixo",maintenanceDue:"Manutenção Pendente",test:"Teste"},timeAgo:{justNow:"Agora mesmo",minutesAgo:"há {{minutes}} minutos",hoursAgo:"há {{hours}} horas"}},restoreBackup:{title:"Restaurar Backup",restoring:"Restaurando...",restoreComplete:"Restauração Concluída",restoreFailed:"Falha na Restauração",importSettings:"Importar configurações de um arquivo de backup",pleaseWait:"Aguarde enquanto seus dados estão sendo restaurados",clickToSelect:"Clique para selecionar o arquivo de backup (.json ou .zip)",howDuplicateHandling:"Como funciona o tratamento de duplicatas:",categories:{printers:"Impressoras",smartPlugs:"Tomadas Inteligentes",notificationProviders:"Provedores de Notificação",filaments:"Filamentos",archives:"Arquivos",pendingUploads:"Uploads Pendentes",settingsTemplates:"Configurações e Modelos"},matchingInfo:{printers:"correspondem pelo número de série",smartPlugs:"correspondem pelo endereço IP",notificationProviders:"correspondem pelo nome",filaments:"correspondem pelo nome + tipo + marca",archives:"correspondem pelo hash do conteúdo",pendingUploads:"correspondem pelo nome do arquivo",settingsTemplates:"sempre sobrescrito"},replaceExisting:"Substituir dados existentes",keepExisting:"Manter dados existentes",replaceDescription:"Substituir itens que já existem com os dados do backup",keepDescription:"Restaurar apenas itens que não existem",caution:"Atenção:",cautionText:"Sobrescrever substituirá suas configurações atuais pelos dados do backup. Os códigos de acesso da impressora nunca são sobrescritos por segurança.",itemsRestored:"Itens Restaurados",itemsSkipped:"Itens Ignorados",restored:"Restaurado",skipped:"Ignorado (já existe)",filesLabel:"Arquivos (3MF, miniaturas, etc.)",newApiKeysGenerated:"Novas Chaves API Geradas",newApiKeysWarning:"Essas chaves são exibidas apenas uma vez. Copie-as agora!",processingBackup:"Processando arquivo de backup...",noDataFound:"Nenhum dado foi encontrado para restaurar no arquivo de backup.",failedToRestore:"Falha ao restaurar o backup. Verifique o formato do arquivo."},backupExport:{title:"Exportar Backup",selectData:"Selecione os dados a incluir",selectAll:"Selecionar Todos",selectNone:"Selecionar Nenhum",categoryDescriptions:{settings:"Idioma, tema, preferências de atualização",notifications:"ntfy, Pushover, Discord, etc.",templates:"Modelos de mensagens personalizadas",smartPlugs:"Configurações de tomadas Tasmota",externalLinks:"Links da barra lateral para serviços externos",printers:"Informações da impressora (códigos de acesso excluídos)",plateDetection:"Imagens de referência de placa vazia",filaments:"Tipos e custos de filamento",maintenance:"Cronogramas de manutenção personalizados",archives:"Todos os dados de impressão + arquivos (3MF, miniaturas, fotos)",projects:"Projetos, itens de BOM e anexos",pendingUploads:"Uploads de impressora virtual aguardando revisão",apiKeys:"Chaves API de webhook (novas chaves geradas na importação)"},requiresPrinters:"Requer que as impressoras sejam selecionadas",zipFileWarning:"Um arquivo ZIP será criado.",zipFileDescription:"Inclui todos os arquivos 3MF, miniaturas, timelapses e fotos. Isso pode levar algum tempo e resultar em um arquivo grande.",includeAccessCodes:"Incluir Códigos de Acesso",includeAccessCodesDescription:"Para transferir para outra máquina",includeAccessCodesWarning:"Os códigos de acesso serão incluídos em texto simples. Mantenha este arquivo de backup seguro!",categoriesSelected:"{{selectedCount}} categorias selecionadas"},pendingUploads:{placeholders:{notes:"Adicione notas sobre esta impressão..."},discardUpload:"Descartar Upload",archiveAllUploads:"Arquivar Todos os Uploads",discardAllUploads:"Descartar Todos os Uploads",archive:"Arquivar",timeAgo:{justNow:"Agora mesmo",minutesAgo:"há {{minutes}} minutos",hoursAgo:"há {{hours}} horas",daysAgo:"há {{days}} dias"}},apiBrowser:{placeholders:{requestBody:"Corpo da requisição JSON...",searchEndpoints:"Pesquisar endpoints..."}},configureAmsSlot:{title:"Configurar Slot AMS",slotConfigured:"Slot Configurado!",configuringSlot:"Configurando slot:",slotLabel:"{{ams}} – Slot {{slot}}",searchPresets:"Pesquisar predefinições...",colorPlaceholder:"Nome da cor ou hex (ex.: marrom, FF8800)",clearCustomColor:"Limpar cor personalizada",noCloudPresets:"Nenhuma predefinição na nuvem. Faça login no Bambu Cloud para sincronizar.",noPresetsAvailable:"Nenhuma predefinição disponível. Faça login no Bambu Cloud ou importe perfis locais.",noMatchingPresets:"Nenhuma predefinição correspondente encontrada.",custom:"Personalizado",builtin:"Integrado",settingsSentToPrinter:"Configurações enviadas para a impressora",filamentProfile:"Perfil de Filamento",kProfileLabel:"Perfil K (Avanço de Pressão)",filteringFor:"Filtrando por: {{material}}",noKProfile:"Nenhum perfil K (usar padrão 0.020)",noMatchingKProfiles:"Nenhum perfil K correspondente encontrado. O K padrão=0.020 será usado.",selectFilamentFirst:"Selecione um perfil de filamento primeiro",kFromCalibration:"K={{value}} da calibração da impressora",customColorLabel:"Cor Personalizada (opcional)",presetColors:"Cores de {{name}}:",showLessColors:"Mostrar menos cores",showMoreColors:"Mostrar mais cores",clear:"Limpar",hexLabel:"Hex – #{{hex}}",resetting:"Redefinindo...",resetSlot:"Redefinir Slot",cancel:"Cancelar",configuring:"Configurando...",configureSlot:"Configurar Slot"},githubBackup:{title:"Backup do Git",history:"Histórico",downloadBackup:"Baixar Backup",restoreBackup:"Restaurar Backup",noBackupsYet:"Nenhum backup ainda"},emailSettings:{placeholders:{fromName:"Bambuddy"}},tagManagement:{searchTags:"Pesquisar tags...",renameTag:"Renomear tag",deleteTag:"Excluir tag"},notificationTemplates:{placeholders:{title:"Título da notificação...",body:"Corpo da notificação..."}},batchTag:{placeholders:{newTag:"Digite uma nova tag..."}},photoGallery:{deletePhoto:"Excluir foto"},filamentHoverCard:{copySpoolUuid:"Copiar UUID do carretel"},kProfilesView:{hasNote:"Possui nota",copyProfile:"Copiar perfil"},layout:{openMenu:"Abrir menu",noPermissionSystemInfo:"Você não tem permissão para visualizar informações do sistema"},dashboard:{dragToReorder:"Arrastar para reordenar",hideWidget:"Ocultar widget"},notificationProviderCard:{deleteNotificationProvider:"Excluir provedor de notificação"},fileManagerModal:{closeFileManager:"Fechar gerenciador de arquivos",sortFiles:"Ordenar arquivos",goToParentFolder:"Ir para a pasta pai",threeView:"Visualização 3D"},embeddedCameraViewer:{refreshStream:"Atualizar stream",close:"Fechar",zoomOut:"Reduzir zoom",resetZoom:"Redefinir zoom",zoomIn:"Aumentar zoom",dragToResize:"Arrastar para redimensionar"},timelapseViewer:{skipBack5s:"Voltar 5s",skipForward5s:"Avançar 5s"},notificationProviders:{descriptions:{email:"Notificações por email SMTP",telegram:"Notificações via bot do Telegram",discord:"Enviar para canal do Discord via webhook",ntfy:"Notificações push gratuitas e auto-hospedáveis",pushover:"Notificações push simples e confiáveis",callmebot:"Notificações gratuitas via WhatsApp pelo CallMeBot",webhook:"POST HTTP genérico para qualquer URL"}},logViewer:{searchPlaceholder:"Pesquisar mensagem ou nome do logger...",noLogEntries:"Nenhuma entrada de log encontrada"},switchbarPopover:{noSwitchesInSwitchbar:"Nenhum switch na barra de switches"},projectPageModal:{placeholders:{title:"Título",designer:"Designer",license:"Licença",description:"Digite a descrição...",profileTitle:"Título do perfil",profileDescription:"Descrição do perfil..."}},spoolmanSettings:{},time:{unknown:"-",waiting:"Aguardando",justNow:"Agora mesmo",now:"Agora",minsAgo:"{{count}}min atrás",inMins:"em {{count}}min",hoursAgo:"{{count}}h atrás",inHours:"em {{count}}h",daysAgo:"{{count}}d atrás",inDays:"em {{count}}d"},spoolbuddy:{nav:{dashboard:"Painel",ams:"AMS",inventory:"Inventário",writeTag:"Escrever",settings:"Configurações"},status:{nfcReady:"NFC pronto",nfcOff:"NFC desligado",offline:"Offline",online:"Online",noPrinters:"Sem impressoras",deviceOffline:"Dispositivo offline",waitingConnection:"Aguardando conexão do dispositivo...",systemReady:"Sistema pronto",status:"Status"},dashboard:{readyToScan:"Pronto para escanear",idleMessage:"Coloque um carretel na balança para identificá-lo",nfcHint:"A tag NFC será lida automaticamente",device:"Dispositivo",syncWeight:"Sincronizar peso",weightSynced:"Sincronizado!",unknownTag:"Tag desconhecida",newTag:"Nova tag detectada",onScale:"na balança",linkSpool:"Vincular ao carretel",linkTagTitle:"Vincular tag ao carretel",linkTag:"Vincular tag",selectSpool:"Selecione um carretel para vincular a esta tag:",noUntagged:"Nenhum carretel sem tag encontrado",tagDetected:"Tag detectada",noTag:"Sem tag",tagId:"Etiqueta",grossWeight:"Peso bruto",spoolSize:"Tamanho do carretel",close:"Fechar",currentSpool:"Carretel Atual",plateReady:"Mesa pronta: {{name}}",plateReadyLabel:"Mesas para liberar",plateClearAction:"Liberar",plateClearedToast:"Mesa marcada como limpa",plateClearFailed:"Não foi possível marcar a mesa como limpa"},modal:{spoolDetected:"Carretel Detectado",assignToAms:"Atribuir ao AMS",syncWeight:"Sincronizar Peso",weightSynced:"Sincronizado!",syncing:"Sincronizando...",newTagDetected:"Nova Tag Detectada",addToInventory:"Adicionar ao Inventário",assignToAmsTitle:"Atribuir ao AMS",selectSlot:"Selecionar um slot",assign:"Atribuir",assigning:"Atribuindo...",assignSuccess:"Atribuído!",assignPendingInsert:"Atribuído. O slot será configurado quando você inserir o carretel.",assignError:"Falha ao atribuir carretel. Tente novamente.",noPrinterSelected:"Selecionar uma impressora...",noAmsDetected:"Nenhum AMS detectado nesta impressora",slot:"Slot"},weight:{noReading:"Sem leitura",stable:"Estável",measuring:"Medindo...",tare:"Tarar",calibrate:"Calibrar"},spool:{remaining:"Restante",material:"Material",brand:"Marca",color:"Cor",coreWeight:"Núcleo",labelWeight:"Rótulo",scaleWeight:"Balança",netWeight:"Líquido",lastUsed:"Último uso"},ams:{noData:"Nenhum AMS detectado",connectAms:"Conecte um AMS para ver os slots",noPrinter:"Nenhuma impressora selecionada",selectPrinter:"Selecione uma impressora na barra superior",printerDisconnected:"Impressora desconectada",humidity:"Umidade",level:"Nível",active:"Ativo",slot:"Slot",empty:"Vazio"},inventory:{search:"Buscar carretéis...",empty:"Nenhum carretel no inventário",noResults:"Nenhum carretel correspondente",spools:"carretéis",addSpool:"Adicionar carretel"},settings:{tabDevice:"Dispositivo",tabDisplay:"Tela",tabScale:"Balança",tabUpdates:"Atualizações",nfcReader:"Leitor NFC",type:"Tipo",connection:"Conexão",notConnected:"N/D",deviceInfo:"Info do dispositivo",hostname:"Host",uptime:"Tempo de atividade",brightness:"Brilho",saved:"Salvo",noBacklight:"Nenhuma retroiluminação DSI detectada. O controle de brilho requer uma tela DSI.",screenBlank:"Tempo para desligar tela",screenBlankDesc:"A tela desliga após inatividade. Toque para despertar.",displayNote:"O brilho é aplicado como filtro de software.",scaleCalibration:"Calibração da balança",currentWeight:"Peso atual",tareOffset:"Tara",calFactor:"Fator",knownWeight:"Peso conhecido",calStep1:"Remova todos os itens da balança e pressione Definir zero.",calStep2:"Coloque o peso conhecido na balança.",setZero:"Definir zero",calibrateNow:"Calibrar",calibrated:"Calibrado",tareSet:"Comando de tara enviado. Aguardando dispositivo...",tareComplete:"Tara concluída!",tareTimedOut:"Tempo esgotado para a tara — o daemon do SpoolBuddy está em execução?",tareFailed:"Falha ao enviar comando de tara",zeroSet:"Ponto zero definido. Coloque o peso conhecido na balança.",calibrationDone:"Calibração concluída!",calibrationFailed:"Falha na calibração",lastCalibrated:"Última calibração",stable:"Estável",settling:"Estabilizando...",firmware:"Firmware",scale:"Balança",noDevice:"Nenhum dispositivo SpoolBuddy encontrado",daemonVersion:"Versão do daemon",currentVersion:"Atual",versionPending:"Aguardando daemon...",checking:"Verificando...",checkUpdates:"Verificar atualizações",updateAvailable:"Atualização disponível",updateInstructions:"Atualize via SSH: execute o script de instalação do SpoolBuddy.",upToDate:"Atualizado",includeBeta:"Incluir versões beta",systemConfig:"Backend e autenticação",backendUrl:"URL do backend Bambuddy",apiToken:"Token de API",apiTokenPlaceholder:"Insira o token de API",saveConfig:"Salvar configuração",systemQueued:"Configuração enfileirada.",systemFieldsRequired:"URL do backend é obrigatória.",nfcDiagnostic:"Diagnóstico NFC",scaleDiagnostic:"Diagnóstico da balança",readTagDiagnostic:"Diagnóstico de leitura de tag",testNfc:"Testar leitor",testScale:"Testar precisão",testReadTag:"Ler tag"},writeTag:{tabExisting:"Bobina existente",tabNew:"Nova bobina",tabReplace:"Substituir tag",searchPlaceholder:"Buscar por material, cor, marca...",noUntaggedSpools:"Nenhuma bobina sem tag",noTaggedSpools:"Nenhuma bobina com tag",selectSpool:"Selecione uma bobina e coloque um NTAG no leitor",placeTag:"Coloque um NTAG no leitor",tagReady:"Tag detectado — pronto para gravar",writeTag:"Gravar Tag",replaceTag:"Substituir Tag",writing:"Gravando tag...",waiting:"Aguardando SpoolBuddy...",writeSuccess:"Tag gravado com sucesso!",writeFailed:"Falha na gravação",queueFailed:"Falha ao enfileirar comando de gravação",tryAgain:"Tentar novamente",cancel:"Cancelar",replaceWarning:"O tag antigo será desvinculado. O novo tag o substituirá.",deviceOffline:"SpoolBuddy está offline",material:"Material",colorName:"Nome da cor",color:"Cor",brand:"Marca",weight:"Peso (g)",createSpool:"Criar bobina",creating:"Criando...",spoolCreated:"Bobina criada! Pronto para gravar.",createFailed:"Falha ao criar bobina",incompleteDataWarning:"Tag gravada com dados Spoolman incompletos"},quickMenu:{printerPower:"Energia da impressora",systemControls:"Sistema",restartDaemon:"Reiniciar daemon",restartBrowser:"Reiniciar navegador",reboot:"Reiniciar",shutdown:"Desligar",swipeToClose:"Deslize para baixo para fechar",confirmTitle:"Confirmar",confirmShutdown:"Tem certeza de que deseja desligar o SpoolBuddy? Você precisará de acesso físico para ligá-lo novamente.",confirmReboot:"Tem certeza de que deseja reiniciar o SpoolBuddy?",confirmRestartDaemon:"Reiniciar o daemon do SpoolBuddy? NFC e balança ficarão temporariamente indisponíveis.",confirmRestartBrowser:"Reiniciar o navegador kiosk? A tela ficará brevemente preta.",confirm:"Confirmar",confirmPlugOn:"Ligar {{name}}?",confirmPlugOff:"Desligar {{name}}?",turnOn:"Ligar",turnOff:"Desligar"}},diagnostic:{modalTitle:"Diagnóstico de conexão — {{name}}",running:"Executando diagnóstico...",runningElapsed:"Executando diagnóstico... ({{elapsed}}s)",waitingForReportHint:"Aguardando a impressora publicar um relatório de status — pode levar até {{max}} segundos.",runFailed:"Não foi possível executar o diagnóstico: {{error}}",retry:"Executar novamente",runButton:"Executar diagnóstico",sectionTitle:"Diagnóstico de conexão",sectionDescription:"Verifique por que uma impressora não conecta ou não imprime — acessibilidade das portas, modo desenvolvedor LAN, modo de rede Docker e credenciais.",noPrinters:"Nenhuma impressora configurada.",overall:{ok:"Nenhum problema encontrado — a conexão da impressora parece saudável.",warnings:"A impressora deve funcionar, mas alguns pontos exigem atenção.",problems:"Foram encontrados problemas que explicam por que a impressora não conecta ou não imprime."},check:{port_mqtt:{title:"Porta de controle (MQTT 8883)",pass:"Acessível — a impressora está aceitando conexões de controle.",fail:"A porta 8883 está inacessível. A impressora está desligada, em outro endereço IP, ou um firewall está bloqueando. Verifique o IP da impressora e se nada bloqueia a porta 8883."},port_ftps:{title:"Porta de transferência de arquivos (FTPS 990)",pass:"Acessível — o envio de arquivos de impressão funcionará.",warn:"A porta 990 está inacessível. O monitoramento ainda pode funcionar, mas o envio de impressões para a impressora falhará. Verifique se a porta 990 não está bloqueada."},port_rtsps:{title:"Porta da câmera (RTSPS 322)",pass:"Acessível — o streaming da câmera funcionará.",warn:"A porta 322 está inacessível. A visualização ao vivo da câmera não funcionará. Isso não afeta a impressão."},network_mode:{title:"Modo de rede Docker",pass:"Executando no modo de rede host.",warn:'O Bambuddy está sendo executado em rede Docker bridge. A descoberta de impressoras e a impressora virtual precisam do modo de rede host — recrie o contêiner com "network_mode: host".',skip:"Não está sendo executado no Docker — não aplicável."},subnet:{title:"Sub-rede",pass:"A impressora e o Bambuddy estão na mesma sub-rede.",warn:"A impressora ({{printer_ip}}) e o Bambuddy ({{host_ip}}) estão em sub-redes diferentes. Eles podem não se alcançar, a menos que o roteamento entre as sub-redes esteja configurado.",skip:"Não foi possível determinar a sub-rede — ignorado."},mqtt_auth:{title:"Credenciais da impressora",pass:"A impressora aceitou a conexão.",fail:"A impressora está acessível mas recusou a conexão. O código de acesso ou o número de série provavelmente está incorreto. O código de acesso muda toda vez que o Modo Desenvolvedor é alternado — copie-o novamente da tela da impressora.",skip:"Não verificado — não foi possível alcançar a impressora."},developer_mode:{title:"Modo Desenvolvedor LAN",pass:"O Modo Desenvolvedor está ativado.",fail:"O Modo Desenvolvedor está DESLIGADO na impressora. Ative-o nas configurações de LAN da impressora — e confirme com OK. Sem ele, as impressões não iniciarão.",skip:"Não foi possível verificar — requer uma conexão ativa com a impressora."},printer_publishing:{title:"Impressora publicando status",pass:"A impressora está publicando atualizações de status — AMS, filamentos e perfis K serão espelhados corretamente para o slicer.",fail:"O broker MQTT aceitou a conexão, mas a impressora não publicou nenhum relatório de status. Quase sempre é um número de série errado ou com maiúsculas/minúsculas incorretas — o tópico device/<serial>/report diferencia maiúsculas de minúsculas. Verifique o número de série nas configurações da impressora comparando com a tela do equipamento.",skip:"Não foi possível verificar — requer uma conexão ativa com a impressora."}}},systemHealth:{sectionTitle:"Saúde do sistema",sectionDescription:"Analisa os logs recentes em busca de problemas conhecidos que você normalmente pode resolver sozinho, antes que virem um chamado de suporte.",rescan:"Analisar novamente",clean:"Nenhum problema conhecido encontrado nas últimas {{times}} entradas de log.",logUnavailable:"O registro em arquivo está desativado, então os logs não podem ser analisados. Ative o registro em arquivo para usar esta verificação.",learnMore:"Como corrigir",fixLabel:"Correção:",occurrences:"Visto {{times}}× — última vez às {{lastSeen}}",category:{layer8:"Você pode corrigir isto",environment:"Ambiente",bug:"Por favor, relate isto"},signature:{"ftp-auth-rejected":{name:"A impressora rejeitou o código de acesso",cause:"A impressora recusou o login de transferência de arquivos. O código de acesso está errado ou mudou após alternar o Modo Desenvolvedor.",fix:"Copie novamente o código de acesso da tela da impressora (configurações de LAN) e atualize-o nas configurações da impressora no Bambuddy."},"ftp-connection-timeout":{name:"Tempo limite da conexão de transferência de arquivos",cause:"O Bambuddy não conseguiu acessar a porta de transferência de arquivos da impressora (FTPS 990). A porta está bloqueada, ou a impressora está desligada ou em outra sub-rede.",fix:"Verifique se nada bloqueia a porta 990 entre o Bambuddy e a impressora e se ambos estão na mesma rede."},"ftp-ssl-error":{name:"Falha no handshake seguro de transferência de arquivos",cause:"O handshake TLS com o servidor de transferência de arquivos da impressora falhou. Geralmente é causado por um firewall ou firmware desatualizado da impressora.",fix:"Atualize o firmware da impressora e verifique se nenhum firewall ou proxy intercepta a conexão na porta 990."},"mqtt-connection-flapping":{name:"A conexão com a impressora cai repetidamente",cause:"A conexão de controle (MQTT 8883) desconecta e reconecta repetidamente — geralmente por uma rede fraca ou uma porta parcialmente bloqueada.",fix:"Verifique o sinal de Wi-Fi perto da impressora, prefira uma conexão com fio e certifique-se de que a porta 8883 esteja acessível de forma confiável."},"camera-connection-refused":{name:"Transmissão da câmera inacessível",cause:"Não foi possível acessar a câmera ao vivo na porta RTSPS 322. A porta está bloqueada, ou a câmera ou a visualização ao vivo via LAN está desativada na impressora.",fix:"Ative a câmera e a visualização ao vivo via LAN na impressora e verifique se a porta 322 não está bloqueada. Isso não afeta a impressão."},"database-locked":{name:"Conflitos de gravação no banco de dados",cause:'O banco de dados SQLite apresenta erros "database is locked" sob carga — comum ao usar várias impressoras ao mesmo tempo.',fix:"Migre o Bambuddy para um banco de dados PostgreSQL externo. Consulte o guia do PostgreSQL na documentação."}}},vpDiagnostic:{title:"Verificação de configuração — {{name}}",runButton:"Executar verificação de configuração",running:"Executando verificação de configuração...",runFailed:"Não foi possível executar a verificação de configuração: {{error}}",retry:"Verificar novamente",overall:{ok:"Todas as verificações passaram — esta impressora virtual está configurada corretamente.",warnings:"A impressora virtual deve funcionar, mas alguns pontos precisam de atenção.",problems:"Foram encontrados problemas que explicam por que o slicer não consegue ver ou usar esta impressora virtual."},check:{enabled:{title:"Impressora virtual habilitada",fail:"Esta impressora virtual está desligada. Ative-a para torná-la detectável."},running:{title:"Serviços em execução",fail:"A impressora virtual está habilitada, mas seus serviços não estão em execução. Verifique o log do Bambuddy — geralmente um conflito de IP de vínculo ou um erro de permissão os interrompe."},bind_interface:{title:"Interface de rede de vínculo",fail:'A interface de vínculo não está definida ou não existe mais neste host. Escolha uma interface atual no menu "Interface de vínculo".'},access_code:{title:"Código de acesso definido",fail:"Nenhum código de acesso definido. O slicer precisa receber o mesmo código de acesso de 8 caracteres que você define aqui."},target_printer:{title:"Impressora de destino",fail:"Nenhuma impressora de destino selecionada. O modo proxy precisa de uma impressora real para a qual encaminhar.",warn:"A impressora de destino está offline no momento — o encaminhamento será retomado quando ela se reconectar."},port_ftps:{title:"Serviço de upload de arquivos (porta {{port}})",fail:"Nada está escutando na porta {{port}} do IP de vínculo, então o slicer não consegue enviar arquivos. A causa habitual é um conflito de porta nesta interface."},port_mqtt:{title:"Serviço de controle (porta {{port}})",fail:"Nada está escutando na porta {{port}} do IP de vínculo, então o slicer não consegue conectar nem mostrar o status."},port_bind:{title:"Serviço de descoberta (porta {{port}})",fail:"Nada está escutando na porta {{port}} do IP de vínculo, então a negociação de descoberta do slicer falha."},certificate:{title:"Certificado TLS",pass:"Certificado pronto. Verifique se o certificado CA do Bambuddy (acima) está importado no armazenamento de confiança do seu slicer.",fail:"O certificado TLS desta impressora virtual está ausente. Verifique se o diretório de dados do Bambuddy tem permissão de escrita."}}},bugReport:{logHealthSummary:"Problemas conhecidos encontrados nos seus logs",logHealthIntro:"Os logs recentes correspondem a problemas conhecidos. Veja as correções abaixo — resolvê-las pode solucionar seu problema sem um relatório de bug. Você ainda pode enviar um relatório abaixo.",title:"Reportar um bug",description:"Descrição",descriptionPlaceholder:"O que deu errado? Por favor, descreva o problema...",email:"Email (opcional)",emailPlaceholder:"seu@email.com.br",emailPrivacy:"Se fornecido, seu email será incluído em uma seção recolhida da issue no GitHub para que o mantenedor possa entrar em contato.",screenshot:"Captura de tela",uploadOrPaste:"Enviar, colar ou arrastar uma imagem",dataCollectedSummary:"Quais dados são incluídos no relatório?",dataIncluded:"Incluídos:",dataIncludedList:"Versão do app, SO, arquitetura, versão Python, estatísticas do banco de dados (apenas contagens), modelos de impressora, quantidade de bicos, versões de firmware, status de conexão, status de integrações (Spoolman, MQTT, HA), configurações não sensíveis, contagem de interfaces de rede, detalhes Docker, versões de dependências.",dataNeverIncluded:"Nunca incluídos:",dataNeverIncludedList:"Nomes de impressoras, números de série, códigos de acesso, senhas, endereços IP, endereços de email, chaves de API, tokens, URLs de webhook, nomes de host ou nomes de usuário.",submit:"Enviar",startLogging:"Iniciar log de depuração",stepEnableLogging:"Log de depuração ativado",stepReproduce:"Reproduza o problema agora",stepStopLogging:"Parar & enviar relatório",stopAndSubmit:"Parar & Enviar",maxDuration:"Para automaticamente após {{minutes}} min",stoppingLogs:"Coletando logs & enviando...",submitting:"Enviando relatório de bug...",submittingStepConnection:"Executando verificações de conectividade das impressoras",submittingStepVirtualPrinters:"Executando verificações de configuração das impressoras virtuais",submittingStepLogScan:"Analisando registros recentes em busca de problemas conhecidos",submittingStepSubmit:"Enviando relatório para o GitHub",submitSuccess:"Relatório de bug enviado com sucesso!",submitFailed:"Falha ao enviar relatório de bug",diagnosticChecking:"Verificando as conexões das impressoras...",diagnosticHealthy:"Verificação de conexão aprovada — nenhum problema encontrado nas suas impressoras.",diagnosticSummary:"{{problems}} de {{total}} impressoras têm problemas de conexão",diagnosticIntro:"Uma ou mais impressoras têm um problema de conexão que pode estar causando seu problema. Expanda uma impressora abaixo para ver a solução — resolvê-la pode solucionar o problema sem um relatório de bug. Você ainda pode enviar um relatório abaixo.",thankYou:"Obrigado!",submitted:"Seu relatório de bug foi enviado.",viewIssue:"Ver issue",unexpectedError:"Ocorreu um erro inesperado"},failureDetection:{title:"Detecção de Falhas por IA",description:"Monitora impressões via API ML do Obico auto-hospedada e age automaticamente em falhas detectadas.",mlUrl:"URL da API ML do Obico",mlUrlHint:"URL base do seu contêiner Obico ml_api auto-hospedado (ex.: http://192.168.1.10:3333).",test:"Testar",testSuccess:"API ML acessível e operacional.",testFailed:"Não foi possível acessar a API ML.",sensitivity:"Sensibilidade",sensitivityLow:"Baixa (menos falsos positivos)",sensitivityMedium:"Média (equilibrada)",sensitivityHigh:"Alta (detecção precoce, mais falsos positivos)",sensitivityHint:"Ajusta os limiares de confiança que disparam avisos e falhas.",action:"Ação em falha detectada",actionNotify:"Apenas notificar",actionPause:"Pausar impressão",actionPauseOff:"Pausar e cortar energia",pollInterval:"Intervalo de verificação (segundos)",pollIntervalHint:"Frequência de verificação de cada impressora durante a impressão. Mínimo 5s, máximo 120s.",externalUrlMissing:"URL externa não definida.",externalUrlHint:"A API ML busca a captura da câmera por URL. Defina a URL externa nas configurações gerais para que o contêiner da API ML possa alcançar o Bambuddy.",perPrinterTitle:"Impressoras monitoradas",perPrinterHint:"Escolha quais impressoras o serviço de detecção monitora.",monitorAll:"Monitorar todas as impressoras conectadas",statusTitle:"Status",serviceRunning:"Serviço em execução",thresholds:"Limiares baixo / alto",activePrinters:"Impressões ativas",noActivePrints:"Nenhuma impressão em andamento.",historyTitle:"Detecções recentes",noHistory:"Nenhuma detecção ainda."},makerworld:{title:"MakerWorld",description:"Cole uma URL de modelo do MakerWorld para importar e imprimir diretamente do Bambuddy — sem precisar abrir o app Bambu Handy.",pasteUrlHeader:"Importar do MakerWorld",pasteUrlPlaceholder:"https://makerworld.com/en/models/… ou cole qualquer link do MakerWorld",resolveButton:"Resolver",signInRequiredTitle:"Login no Bambu Cloud necessário para baixar",signInRequiredBody:"Você pode navegar pelos detalhes do modelo anonimamente, mas o MakerWorld exige uma conta Bambu Cloud para baixar arquivos 3MF.",openCloudSettings:"Abrir configurações do Cloud",untitledModel:"Modelo sem título",byCreator:"por {{name}}",downloadsCount:"{{count}} downloads",licensePrefix:"Licença",alreadyImported:"Já na biblioteca",openOnMakerworld:"Abrir no MakerWorld",alreadyInLibrary:"Este modelo já está na sua biblioteca — encontre-o em Gerenciador de Arquivos → MakerWorld",importSuccess:"{{filename}} importado — salvo em Gerenciador de Arquivos → MakerWorld",platesHeader:"Placas ({{count}})",plateDefaultName:"Placa {{n}}",materialCount:"{{count}} filamentos",amsRequired:"AMS necessário",slicedFor:"Fatiado para {{printer}}",alsoCompatible:"Também marcado como compatível: {{printers}}",importToLibrary:"Salvar",sliceIn:"Salvar e fatiar no {{slicer}}",disclaimer:"A integração com o MakerWorld usa endpoints de API documentados pela comunidade. Bambuddy não é afiliado nem endossado pelo MakerWorld ou pela Bambu Lab.",lastImportSuccess:"Importado para sua biblioteca",lastImportAlreadyInLibrary:"Já na sua biblioteca",viewInLibrary:"Ver no Gerenciador de Arquivos",openInBambuStudio:"Abrir no Bambu Studio",openInOrcaSlicer:"Abrir no OrcaSlicer",importTo:"Importar para o Gerenciador de Arquivos",recentImportsHeader:"Importações recentes",phaseResolving:"Resolvendo",phaseDownloading:"Baixando",folderAuto:"MakerWorld (padrão)",importAll:"Importar tudo",importAllProgress:"Importando {{current}}/{{total}}",openGallery:"Abrir galeria de imagens",galleryPrev:"Imagem anterior",galleryNext:"Próxima imagem",deleteImport:"Remover da biblioteca",importDeleting:"Removendo…",importDeleted:"Removido da biblioteca",confirmDelete:"Remover {{filename}} da biblioteca? O arquivo local será excluído, mas a placa pode ser reimportada do MakerWorld.",errors:{resolveFailed:"Não foi possível resolver essa URL do MakerWorld.",downloadFailed:"Falha no download. Tente novamente.",deleteFailed:"Não foi possível remover o arquivo da biblioteca."}},gcodeViewer:{back:"Voltar",backToArchives:"Voltar para os arquivos de impressão",backToFiles:"Voltar para o gerenciador de arquivos"},libraryTrash:{title:"Lixeira",headerButton:"Lixeira",headerTooltip:"Ver arquivos movidos para a lixeira",backToFiles:"Voltar ao gerenciador de arquivos",subtitleAdmin:"Arquivos excluídos ficam aqui por {{days}} dias e depois são removidos automaticamente. Esta visualização mostra a lixeira de todos os usuários.",subtitleUser:"Arquivos excluídos ficam aqui por {{days}} dias e depois são removidos automaticamente.",loading:"Carregando a lixeira…",loadError:"Não foi possível carregar a lixeira.",empty:"A lixeira está vazia.",summary:"{{count}} arquivos · {{size}}",emptyTrash:"Esvaziar lixeira",restore:"Restaurar",purgeNow:"Excluir agora",autoPurgeIn:"Exclusão automática em {{when}}",days:"dias",retentionLabel:"Excluir automaticamente após",selectAll:"Selecionar todos",selectOne:"Selecionar {{filename}}",selectionCount:"{{count}} selecionado(s)",bulkRestore:"Restaurar selecionados",bulkPurge:"Excluir selecionados",col:{filename:"Arquivo",folder:"Pasta",size:"Tamanho",deleted:"Movido para a lixeira",autoPurge:"Exclusão auto.",owner:"Proprietário",actions:"Ações"},confirm:{purgeTitle:"Excluir permanentemente?",purgeBody:"{{filename}} será excluído do disco e não poderá ser restaurado.",emptyTitle:"Esvaziar a lixeira?",emptyBody:"Todos os {{count}} arquivos serão excluídos do disco. Esta ação não pode ser desfeita.",bulkPurgeTitle:"Excluir permanentemente os arquivos selecionados?",bulkPurgeBody:"Os {{count}} arquivos selecionados serão excluídos do disco e não poderão ser restaurados.",cta:"Excluir permanentemente"},toast:{restored:"Arquivo restaurado.",restoreFailed:"Não foi possível restaurar o arquivo.",purged:"Arquivo excluído permanentemente.",purgeFailed:"Não foi possível excluir o arquivo.",emptied:"{{count}} arquivo(s) excluído(s) da lixeira.",emptyFailed:"Não foi possível esvaziar a lixeira.",retentionSaved:"Exclusão automática definida para {{days}} dias.",retentionFailed:"Não foi possível salvar a configuração de retenção.",bulkRestored:"{{count}} arquivo(s) restaurado(s).",bulkPurged:"{{count}} arquivo(s) excluído(s)."}},libraryPurge:{title:"Limpar arquivos antigos",headerButton:"Limpar antigos",headerTooltip:"Mover arquivos antigos em massa para a lixeira",description:"Arquivos mais antigos que o limite serão movidos para a lixeira. Pastas externas são ignoradas. Você pode restaurar da lixeira antes da exclusão automática.",ageLabel:"Mover arquivos mais antigos que",days:"dias",includeNeverPrinted:"Incluir arquivos que nunca foram impressos",effectsTitle:"O que acontece quando você clica em Limpar",effect1:"Os arquivos correspondentes são movidos para a Lixeira — ainda não são excluídos do disco.",effect2:"Você pode restaurá-los da Lixeira a qualquer momento até o fim do período de retenção.",effect3:"Após o período de retenção, o coletor da lixeira os remove permanentemente.",effect4:"Arquivos em pastas externas (vinculadas) são ignorados — Bambuddy nunca exclui bytes que não possui.",previewLoading:"Verificando quantos arquivos correspondem…",previewFailed:"Não foi possível pré-visualizar a limpeza.",previewSummary:"{{count}} arquivos · {{size}} seriam movidos para a lixeira",andMore:"…e mais {{count}}",warning:"Os arquivos são excluídos de forma suave — você pode restaurá-los da lixeira até o fim do período de retenção.",confirmCta:"Mover {{count}} para a lixeira",purging:"Movendo para a lixeira…",toast:{success:"{{count}} arquivo(s) movido(s) para a lixeira.",failed:"Não foi possível limpar os arquivos."}},libraryAutoPurge:{enableLabel:"Limpar arquivos antigos automaticamente",enableDescription:"Executa a limpeza administrativa uma vez por dia. Os arquivos vão primeiro para a lixeira — não são excluídos imediatamente.",ageLabel:"Limpar automaticamente arquivos mais antigos que",ageDescription:"Mínimo 7 dias, máximo 10 anos. Usa a mesma regra de idade do botão Limpar manual.",days:"dias",includeNeverPrinted:"Incluir arquivos que nunca foram impressos",saveFailed:"Não foi possível salvar as configurações de limpeza automática."},archivePurge:{headerButton:"Limpar antigos",headerTooltip:"Excluir arquivos antigos em massa",title:"Limpar arquivos antigos",description:"Limpa o histórico de impressão antigo. Cada arquivo envelhece pela última conclusão de impressão — reimprimir reinicia a idade, então trabalho ativo nunca é removido.",ageLabel:"Excluir arquivos não impressos nos últimos",days:"dias",effectsTitle:"O que acontece quando você clica em Limpar",effect1:"Cada arquivo correspondente é ocultado das listagens e seus arquivos são removidos do disco (3MF, miniatura, timelapse, 3MF de origem, F3D, fotos).",effect2:"A linha do arquivo permanece no banco de dados para que o Quick Stats mantenha a contribuição de filamento, tempo, custo e energia — mesmo comportamento padrão da exclusão individual.",effect3:'Marque "Remover também das estatísticas" abaixo para descartar também a contribuição do Quick Stats (equivalente à opção da exclusão individual). Esse caminho é irreversível.',effect4:"Reimprimir um arquivo reinicia seu cronômetro de idade, então arquivos ativos estão protegidos.",purgeStatsLabel:"Remover também das estatísticas",purgeStatsHint:"Remove os arquivos correspondentes do Quick Stats (filamento, tempo, custo, energia). Sem essa opção, o Quick Stats mantém cada contribuição e apenas os arquivos saem do disco.",previewLoading:"Verificando quantos arquivos correspondem…",previewFailed:"Não foi possível visualizar a limpeza.",previewSummary:"{{count}} arquivos · {{size}} seriam removidos",andMore:"…e mais {{count}}",warning:"Os arquivos são removidos do disco e não podem ser restaurados. Baixe ou favorite o que quiser manter antes de continuar.",confirmCta:"Remover {{count}} arquivo(s)",purging:"Removendo…",toast:{success:"{{count}} arquivo(s) removido(s).",failed:"Não foi possível limpar os arquivos."}},archiveAutoPurge:{enableLabel:"Limpar arquivos antigos auto.",enableDescription:"Uma vez por dia oculta das listagens os arquivos não impressos dentro do limite e remove seus arquivos do disco. Reimprimir reinicia o cronômetro.",ageLabel:"Exclusão auto. de arquivos não impressos nos últimos",ageDescription:"Mínimo 7 dias, máximo 10 anos. Baseado na última conclusão de impressão — reimprimir reinicia a idade. Remove 3MF, miniatura, timelapse, 3MF de origem, F3D e fotos.",days:"dias",purgeStatsLabel:"Remover também das estatísticas",purgeStatsDescription:"Quando ativada, a varredura diária também descarta a contribuição de cada arquivo limpo do Quick Stats (filamento, tempo, custo, energia). Desativada por padrão — o Quick Stats mantém a contribuição e apenas os arquivos saem do disco.",runNow:"Limpar arquivos agora",saveFailed:"Não foi possível salvar as configurações de limpeza automática."},cameraTokens:{title:"Tokens da API de câmera",navTitle:"Tokens da API de câmera",description:"Tokens de longa duração para incorporar o stream da câmera no Home Assistant, Frigate, quiosques ou qualquer outra ferramenta que precise de URL estável. Cada token é apenas para stream de câmera e pode ser revogado a qualquer momento.",loading:"Carregando…",confirmRevoke:{title:"Revogar este token?",body:'Qualquer dispositivo usando "{{name}}" perderá acesso imediatamente. Isso não pode ser desfeito.',cancel:"Cancelar",confirm:"Revogar"},create:{title:"Criar novo token",nameLabel:"Nome do token",namePlaceholder:"ex. Home Assistant",daysLabel:"Dias até expirar",submit:"Criar",hint:"Tempo de vida máximo 365 dias. O valor do token é exibido apenas na criação — copie agora."},created:{title:"Token criado – copie agora",warning:"Esta é a única vez que este token será visível. Após fechar este diálogo, você nunca poderá vê-lo novamente.",copy:"Copiar",dismiss:"Eu salvei"},list:{myTitle:"Meus tokens",allTitle:"Todos os usuários (visão admin)",empty:"Nenhum token ainda.",name:"Nome",owner:"Proprietário",prefix:"Prefixo",created:"Criado",expires:"Expira",lastUsed:"Último uso",revoke:"Revogar",expired:"Expirado"},toast:{created:"Token criado",createFailed:"Falha ao criar token",revoked:"Token revogado",revokeFailed:"Falha ao revogar token",loadFailed:"Falha ao carregar tokens",copied:"Copiado para a área de transferência",copyFailed:"Falha ao copiar – selecione e copie manualmente"}},forecast:{title:"Previsão de Estoque",noSpools:"Nenhum carretel ativo encontrado. Adicione carretéis ao seu inventário para ver os dados de previsão.",noUsageData:"Nenhum dado de uso disponível — não é possível projetar a linha do tempo do estoque.",sku:"SKU",material:"Material",stock:"Estoque",dailyRate:"Taxa",daysLeft:"Dias Restantes",emptyBy:"Esgota em",reorderBy:"Reabastecer até",actions:"Ações",trend:"Tendência",estimated:"Est.",noData:"Sem dados",timeframe:"Período",chartTitle:"Estoque projetado — Top 5 materiais",dashedLinesROP:"Linhas tracejadas = pontos de reposição",stockLevel:"Nível de Estoque",reorderPoint:"Ponto de Reposição",safetyMargin:"Margem de Segurança",trendLegend:"Tendência (baseada em histórico, nível de serviço 95%)",estimatedLegend:"Estimado (delta de peso)",noDataLegend:"Sem dados",ropLabel:"PR",ssLabel:"SE",safetyStockLegend:"Estoque de segurança",stockArrivalLegend:"Chegada do estoque",stockoutLegend:"Ruptura de estoque",alertCount_one:"{{count}} alerta",alertCount_other:"{{count}} alertas",order:"Pedir",globalLeadTime:"Lead time global",globalLeadTimeHint:"Lead time global mínimo — usado no cálculo do ponto de reposição para todos os SKUs",save:"Salvar",cancel:"Cancelar",settingsSaved:"Configurações salvas",failedSaveSettings:"Falha ao salvar configurações",globalLeadTimeSaved:"Prazo global salvo",skuLeadTimeOverride:"Override de Lead Time do SKU",skuLeadTimeHint:"0 = usar lead time global. Defina >0 para substituir para este SKU.",safetyMarginLabel:"Margem de Segurança",effectiveLeadTime:"Lead Time Efetivo",effectiveLeadTimeHint:"máx(global {{global}}d, SKU {{sku}}d)",reorderPointHint:"d̄ × LT + safety margin — peça quando o estoque atingir este nível",safetyMarginHint:"Estoque de segurança estatístico (z=1,65 × σ × √LT) + buffer definido pelo usuário",safetyMarginHintDays:"Buffer adicionado ao estoque de segurança estatístico.{{approx}}",safetyMarginHintDaysApprox:" ≈ {{g}}g na taxa atual.",safetyMarginHintG:"Buffer de peso fixo adicionado ao estoque de segurança estatístico.{{approx}}",safetyMarginHintGApprox:" ≈ {{days}}d na taxa atual.",individualSpools:"Carretéis individuais",labelWeight:"Etiqueta",spoolCount_one:"{{count}} carretel",spoolCount_other:"{{count}} carretéis",stockBreakRisk:"Risco de ruptura de estoque",stockBreakBefore:"Ruptura de estoque antes do reabastecimento",stockBreakDetail:"{{days}}d restantes, lead time {{lt}}d.",reorderNow:"Reabastecer agora",reorderTriggerPassed:"A data de acionamento {{date}} já passou.",shoppingList:"Lista de Compras",shoppingListItems_one:"({{count}} item)",shoppingListItems_other:"({{count}} itens)",shoppingListEmpty:"A lista de compras está vazia. Clique no ícone do carrinho em qualquer linha para adicionar itens.",addToCart:"Adicionar à lista de compras",alertsSnoozed:"Silenciar alertas para este SKU",alertsEnabled:"Ativar alertas para este SKU",addedToCart:"Adicionado à lista de compras",failedAddItem:"Falha ao adicionar item",listView:"Lista",logisticsView:"Logística",qty:"Qtd",weight:"Peso",leadTime:"Prazo de entrega",expectedRestock:"Reabastecimento Previsto",status:"Status",note:"Nota",pending:"Pendente",purchased:"Comprado",received:"Recebido",markPurchased:"Marcar como comprado",markReceived:"Marcar como recebido — adiciona carretéis ao estoque",resetToPending:"Redefinir para pendente",remove:"Remover",clearAll:"Limpar tudo",downloadCsv:"CSV",addToCartTitle:"Adicionar à lista de compras",byQuantity:"Por quantidade",byDuration:"Por duração",numberOfSpools:"Número de carretéis",lastHowManyDays:"Por quantos dias deve durar?",noUsageQty:"Sem dados de uso — quantidade definida como 1.",noteOptional:"Observação (opcional)",notePlaceholder:"ex. para o projeto X, urgente…",addNSpools_one:"Adicionar {{count}} carretel",addNSpools_other:"Adicionar {{count}} carretéis",onArrival:"Na Chegada",stockBreakIn:"Ruptura de estoque em {{days}}d.",stockRunsOutBefore:"O estoque se esgota antes do lead time de {{lt}}d decorrer.",atRate:"A {{rate}}g/dia você precisa de",moreSpools_one:"{{count}} carretel a mais",moreSpools_other:"{{count}} carretéis a mais",bridgeGap:"para cobrir a lacuna.",noReadAccess:"Você não tem permissão para visualizar previsões de inventário.",noWriteAccess:"Você não tem permissão para modificar as configurações de previsão."}},Cpe={nav:{printers:"打印机",archives:"归档",queue:"打印队列",stats:"统计",profiles:"配置文件",maintenance:"维护",projects:"项目",inventory:"耗材",files:"文件管理器",makerworld:"MakerWorld",notifications:"通知",settings:"设置",system:"系统",collapseSidebar:"收起侧边栏",expandSidebar:"展开侧边栏",update:"更新",updateAvailable:"有可用更新：v{{version}}",updateAvailableBanner:"版本 {{version}} 已发布！",viewUpdate:"查看更新",viewOnGithub:"在 GitHub 上查看",keyboardShortcuts:"键盘快捷键 (?)",switchToLight:"切换到浅色模式",switchToDark:"切换到深色模式",switchToSystem:"切换到系统模式",smartSwitches:"智能开关",logout:"退出登录",installApp:"安装应用",installAppSuccess:"Bambuddy 已安装"},common:{save:"保存",saving:"保存中...",cancel:"取消",delete:"删除",edit:"编辑",add:"添加",close:"关闭",confirm:"确认",loading:"加载中...",error:"错误",errorLoading:"加载错误",retry:"重试",success:"成功",warning:"警告",enabled:"已启用",disabled:"已禁用",yes:"是",no:"否",on:"开",off:"关",all:"全部",none:"无",search:"搜索",filter:"筛选",sort:"排序",refresh:"刷新",download:"下载",upload:"上传",uploading:"上传中...",uploadFailed:"上传失败",actions:"操作",status:"状态",name:"名称",description:"描述",date:"日期",time:"时间",hours:"小时",minutes:"分钟",seconds:"秒",days:"天",enable:"启用",disable:"禁用",permissions:"权限",noPrinters:"未配置打印机",noData:"暂无数据",linkNotFound:"未找到链接",required:"必填",optional:"可选",dismiss:"关闭",apply:"应用",reset:"重置",export:"导出",import:"导入",clear:"清除",selectAll:"全选",deselectAll:"取消全选",noChange:"— 不更改 —",unchanged:"未更改",unassigned:"未分配",unknown:"未知",unknownError:"未知错误",today:"今天",tomorrow:"明天",asap:"尽快",overdue:"已逾期",now:"现在",collapse:"收起",expand:"展开",viewArchive:"查看归档",viewInFileManager:"在文件管理器中查看",addedBy:"由 {{username}} 添加",prints:"次打印",more:"还有 {{count}} 个",ascending:"升序",descending:"降序",back:"返回",copy:"复制",copied:"已复制!",printer:"打印机",remove:"移除",type:"类型",print:"打印",rename:"重命名",move:"移动",create:"创建",duplicate:"复制",left:"左",right:"右"},printers:{addPreflight:{checking:"正在检查连接...",warning:"部分连接检查未通过。此打印机可能显示为离线。请查看下方的检查项，尽量修复，或仍然保存。",back:"返回",saveAnyway:"仍然保存"},title:"打印机",addPrinter:"添加打印机",editPrinter:"编辑打印机",deletePrinter:"删除打印机",printerName:"打印机名称",serialNumber:"序列号",ipAddress:"IP 地址 / 主机名",accessCode:"访问码",model:"型号",nozzleCount:"喷嘴数量",autoArchive:"自动归档",status:{available:"可用",idle:"空闲",printing:"打印中",paused:"已暂停",offline:"离线",problem:"故障",error:"错误",finished:"已完成",unknown:"未知"},temperatures:{nozzle:"喷嘴",bed:"热床",chamber:"腔室"},progress:"{{percent}}% 完成",timeRemaining:"剩余 {{time}}",deleteConfirm:'确定要删除"{{name}}"吗？',maintenanceOk:"维护正常",maintenanceWarning:"{{count}} 个警告",maintenanceWarning_plural:"{{count}} 个警告",maintenanceDue:"{{count}} 个到期",maintenanceDue_plural:"{{count}} 个到期",sort:{name:"名称",status:"状态",model:"型号",location:"位置",ascending:"升序排列",descending:"降序排列"},cardSize:{small:"小卡片",medium:"中卡片",large:"大卡片",extraLarge:"超大卡片"},hideOffline:"隐藏离线",nextAvailable:"下一个可用",powerOn:"开机",offlinePrintersWithPlugs:"带智能插座的离线打印机",noPrintersConfigured:"尚未配置打印机",search:"搜索打印机...",noSearchResults:"没有打印机符合您的搜索或筛选条件",filter:{allStatuses:"所有状态",allLocations:"所有位置"},toolbar:{filters:"筛选",view:"视图",actions:"操作"},readyToPrint:"准备打印",external:"外部",extL:"外置左",extR:"外置右",deleteArchives:"删除打印归档",noLabel:"无标签",printPreview:"打印预览",width:"宽度",height:"高度",noObjectsFound:"未找到对象",objectsLoadedOnPrintStart:"对象在打印开始时加载",willBeSkipped:"将被跳过",name:"名称",serialCannotBeChanged:"序列号无法更改",locationHelp:"用于分组打印机和筛选队列任务",wifiSignal:{veryWeak:"非常弱",weak:"弱",fair:"一般",good:"良好",excellent:"优秀"},maintenanceUpToDate:"所有维护均已完成 - 点击查看",chamberLightOn:"打开腔室灯",chamberLightOff:"关闭腔室灯",files:"文件",browseFiles:"浏览打印机文件",autoOffAfterPrint:"打印后自动关机",autoOffExecuted:"已执行自动关机 - 开启打印机以重置",hmsErrors:"HMS 错误",viewHmsErrors:"查看 {{count}} 个 HMS 错误",resume:"继续",pause:"暂停",stop:"停止",camera:"摄像头",skipObject:"跳过对象",reconnect:"重新连接",forceRefresh:"强制刷新",forceRefreshSuccess:"已请求刷新",mqttDebug:"MQTT 调试",printerInformation:"打印机信息",copyToClipboard:"复制",copied:"已复制！",state:"状态",wifiSignalLabel:"WiFi 信号",developerMode:"开发者模式",enabled:"已启用",disabled:"已禁用",addedOn:"添加日期",sdCard:"SD 卡",inserted:"已插入",notInserted:"未插入",totalPrintHours:"打印时长",activeNozzle:"当前：{{nozzle}} 喷嘴",nozzleRack:"喷嘴架",nozzleDocked:"已停靠",nozzleMounted:"已安装",nozzleActive:"使用中",nozzleIdle:"空闲",nozzleDiameter:"直径",nozzleType:"类型",nozzleStatus:"状态",nozzleFilament:"耗材",nozzleWear:"磨损",nozzleMaxTemp:"最高温度",nozzleSerial:"序列号",nozzleHardenedSteel:"硬化钢",nozzleStainlessSteel:"不锈钢",nozzleTungstenCarbide:"碳化钨",nozzleFlow:"流量",nozzleHighFlow:"高流量",nozzleStandardFlow:"标准",firmwareUpdate:"固件更新",firmwareInstructions:"在打印机触摸屏上，前往",firmwareNav:"导航到",settings:"设置",firmware:"固件",discoverPrinters:"发现打印机",searching:"搜索中...",manualEntry:"手动输入",addFromCloud:"从云端添加",toast:{printerDeleted:"打印机已删除",missingSpoolAssignment:"已在{{printer}}上开始打印。以下料槽未分配耗材: {{slots}}",printerAdded:"打印机已添加",printerUpdated:"打印机已更新",failedToDelete:"删除打印机失败",failedToAdd:"添加打印机失败",connectionFailedNotAdded:"无法连接到打印机。请检查 IP 地址、序列号和访问码，并确认已启用仅局域网（LAN-only）模式。该打印机未被添加。",failedToUpdate:"更新打印机失败",commandSent:"命令已发送",failedToSendCommand:"发送命令失败",turnedOn:"{{name}} 已开启",failedToPowerOn:"开启 {{name}} 失败",scriptTriggered:"脚本已触发",printStopped:"打印已停止",printPaused:"打印已暂停",printResumed:"打印已继续",referenceDeleted:"参考已删除",detectionAreaSaved:"检测区域已保存",failedToRunScript:"运行脚本失败",failedToStopPrint:"停止打印失败",failedToPausePrint:"暂停打印失败",failedToResumePrint:"继续打印失败",failedToControlChamberLight:"控制腔室灯失败",failedToSetSpeed:"设置打印速度失败",failedToUpdateSetting:"更新设置失败",failedToSkipObjects:"跳过对象失败",failedToRereadRfid:"重新读取 RFID 失败",failedToCheckPlate:"检查打印板失败",failedToUpdateLabel:"更新标签失败",failedToDeleteReference:"删除参考失败",failedToSaveDetectionArea:"保存检测区域失败",plateCheckEnabled:"打印板检查已启用",plateCheckDisabled:"打印板检查已禁用",calibrationSaved:"校准已保存！",calibrationFailed:"校准失败",rfidRereadInitiated:"已发起 RFID 重新读取",loadInitiated:"加载耗材中…",unloadInitiated:"卸载耗材中…",failedToLoad:"加载耗材失败",failedToUnload:"卸载耗材失败"},connection:{connected:"已连接",offline:"离线"},plateStatus:{markCleared:"将打印板标记为已清理",cleared:"打印板已清理",notCleared:"打印板未清理",inUse:"打印板使用中"},queue:{inQueue:"队列中有 {{count}} 个打印任务",inQueue_plural:"队列中有 {{count}} 个打印任务"},controls:"控制",rfid:{reread:"重新读取 RFID"},ams:{load:"加载",unload:"卸载"},bedJog:{title:"移动热床",bed:"热床",step:"步长 (mm)",up:"热床上移",down:"热床下移",disabledWhilePrinting:"打印中已禁用",notHomedTitle:"打印机未归零",notHomedMessage:"打印机自上次打印以来尚未归零。请先执行自动归零以确保安全定位（先停放喷头，然后归零 X、Y 和 Z），或者直接移动 — 软限位将被绕过。",homeZ:"自动归零",moveAnyway:"强制移动",homingStarted:"打印机自动归零中…"},permission:{noAdd:"您没有添加打印机的权限",noEdit:"您没有编辑打印机的权限",noDelete:"您没有删除打印机的权限",noControl:"您没有控制打印机的权限",noFiles:"您没有访问打印机文件的权限",noAmsRfid:"您没有重新读取 AMS RFID 的权限",noSmartPlugControl:"您没有控制智能插座的权限",noCamera:"您没有查看摄像头的权限"},modal:{addTitle:"添加打印机",editTitle:"编辑打印机",myPrinter:"我的打印机",selectModel:"选择型号...",locationGroup:"位置 / 分组（可选）",locationPlaceholder:"例如：工作室、办公室、地下室",autoArchiveLabel:"自动归档已完成的打印",fromPrinterSettings:"来自打印机设置",modelOptional:"型号（可选）",saveChanges:"保存更改"},skipObjects:{tooltip:"跳过对象",onlyWhilePrinting:"跳过对象（仅在打印时）",requiresMultiple:"跳过对象（需要2个以上对象）",title:"跳过对象",matchIdsInfo:"将 ID 与打印机显示屏上的 ID 进行对照",printerShowsIds:"打印机屏幕上显示构建板上对象的 ID",skipSelected:"跳过所选",skipping:"跳过中...",noObjectsSelected:"未选择对象",selectObjectsToSkip:"选择要从当前打印中跳过的对象",skipped:"已跳过",objectsSkipped:"对象已跳过",activeCount:"{{count}} 个活跃",waitForLayer:"等待第2层以上才能跳过对象（当前第 {{layer}} 层）",skip:"跳过",confirmTitle:"跳过对象？",confirmMessage:'确定要跳过"{{name}}"吗？此操作无法撤销。'},confirm:{deleteTitle:"删除打印机",deleteMessage:'确定要删除"{{name}}"吗？这将移除所有连接设置。',deleteArchivesNote:"此打印机的所有打印历史将被永久删除。",keepArchivesNote:"打印历史将保留，但不再与此打印机关联。",stopTitle:"停止打印",stopMessage:'确定要停止"{{name}}"上的当前打印吗？这将取消打印任务。',stopButton:"停止打印",pauseTitle:"暂停打印",pauseMessage:'确定要暂停"{{name}}"上的当前打印吗？',pauseButton:"暂停打印",resumeTitle:"继续打印",resumeMessage:'确定要继续"{{name}}"上的打印吗？',resumeButton:"继续打印",powerOnTitle:"开启打印机",powerOnMessage:'确定要打开"{{name}}"的电源吗？',powerOnButton:"开机",powerOffTitle:"关闭打印机",powerOffMessage:'确定要关闭"{{name}}"的电源吗？',powerOffWarning:'警告："{{name}}"正在打印中！确定要关闭电源吗？这将中断打印并可能损坏打印机。',powerOffButton:"关机",haToggleTitle:'切换"{{name}}"',haToggleMessage:"切换 Home Assistant 实体 {{entity}}？如果当前为开启状态，可能会关闭电源。",haToggleWarning:'警告："{{name}}"正在打印中！切换 {{entity}} 可能会切断电源并中断打印。是否继续？',haToggleButton:"切换"},bulk:{select:"选择",selectAll:"全选",selectByLocation:"按位置选择",selected:"已选择{{count}}台",actions:{stop:"停止",pause:"暂停",resume:"继续",clearPlate:"清除打印床",clearHMS:"清除通知"},confirm:{stopTitle:"停止{{count}}个打印任务",stopMessage:"这将取消{{count}}台打印机上的活动打印任务。此操作无法撤销。",stopButton:"全部停止",pauseTitle:"暂停{{count}}个打印任务",pauseMessage:"这将暂停{{count}}台打印机上的活动打印任务。",pauseButton:"全部暂停",clearPlateTitle:"清除{{count}}个打印床",clearPlateMessage:"这将清除{{count}}台打印机的打印床，可能会触发队列中的任务。",clearPlateButton:"全部清除"},success:"{{action}}已在{{count}}台打印机上完成",partial:"{{succeeded}}成功，{{failed}}失败",noneApplicable:"没有选中的打印机处于适合此操作的状态",selectByState:"按状态选择"},discovery:{title:"发现打印机",searching:"搜索中...",scanning:"扫描中...",scanProgress:"扫描中... {{scanned}}/{{total}}",foundPrinters:"发现 {{count}} 台打印机",noPrintersFound:"未找到打印机",noPrintersFoundSubnet:"在指定子网中未找到打印机。",noPrintersFoundNetwork:"在网络上未找到打印机。",allConfigured:"所有发现的打印机已配置完毕。",alreadyAdded:"已添加",select:"选择",manualEntry:"手动输入",addFromCloud:"从云端添加",subnetToScan:"要扫描的子网",dockerNote:"检测到 Docker 环境。请以 CIDR 格式输入打印机所在子网。需要在 docker-compose.yml 中设置 network_mode: host。",scanSubnet:"扫描子网查找打印机",discoverNetwork:"在网络上发现打印机",scanningSubnet:"正在扫描子网查找拓竹打印机...",scanningNetwork:"正在扫描网络...",serialRequired:"需要序列号",unknown:"未知",failedToStart:"启动发现失败",customSubnetOption:"自定义子网...",customSubnetLabel:"自定义子网 (CIDR)",customSubnetNote:"如果您的打印机与此服务器位于不同的网络中，请使用自定义子网。FTP (990) 和 MQTT (8883) 端口必须能够跨路由边界访问。"},drying:{start:"开始干燥",stop:"停止干燥",temperature:"温度",duration:"时长",hours:"小时",timeRemaining:"剩余 {{time}}",active:"干燥中",notSupported:"不支持干燥",powerRequired:"连接AMS电源适配器以启用干燥",startingDrying:"正在启动干燥...",stoppingDrying:"正在停止干燥...",rotateTray:"干燥时旋转料盘"},filaments:"耗材",openCameraOverlay:"打开摄像头叠加层",openCameraWindow:"在新窗口中打开摄像头",firmwareUpdateAvailable:"固件更新可用：{{current}} → {{latest}}",firmwareUpToDate:"固件 {{version}} — 已是最新",firmwareUpdateButton:"更新",plateDetection:{noPermission:"您没有更新打印机的权限",enabledClick:"打印板检查已启用 - 点击禁用",disabledClick:"打印板检查已禁用 - 点击启用",manageCalibration:"管理打印板检测校准",calibrationRequired:"需要校准",calibrationInstructions:"请确保构建板<strong>完全空置</strong>，然后点击校准。",calibrationDescription:"校准会拍摄空置打印板的参考图像。后续检查将与此参考进行比较以检测物体。",calibrationTip:"<strong>提示：</strong>您最多可以为不同的打印板存储5个校准。系统会在检查时自动使用最佳匹配。",plateEmpty:"打印板似乎是空的",objectsDetected:"在打印板上检测到物体",confidence:"置信度",difference:"差异",analysisPreview:"分析预览：",analysisLegend:"绿色框 = 检测区域，红色覆盖 = 与校准的差异",savedReferences:"已保存的参考 ({{count}}/{{max}})",deleteReference:"删除参考",labelPlaceholder:"标签...",clickToEdit:"{{label}} - 点击编辑",clickToAddLabel:"点击添加标签"},speed:{title:"打印速度",silent:"静音 (50%)",standard:"标准 (100%)",sport:"运动 (124%)",ludicrous:"疯狂 (166%)"},airduct:{title:"风道模式",cooling:"制冷",heating:"加热"},noSdCard:"无SD",door:{open:"开",closed:"关"},fans:{partCooling:"零件冷却风扇",auxiliary:"辅助风扇",chamber:"腔室风扇"},clickToViewHmsErrors:"点击查看 HMS 错误",estimatedCompletion:"预计完成时间",plateNumber:"板 {{number}}",slotOptions:"槽位选项",amsPopup:{friendlyName:"AMS 名称",friendlyNamePlaceholder:"例如 AMS 友好名称",serialNumber:"序列号",firmwareVersion:"固件",save:"保存",clear:"清除",noEditPermission:"您没有重命名 AMS 单元的权限"},firmwareModal:{title:"固件更新",titleUpToDate:"固件信息",currentVersion:"当前版本：",latestVersion:"最新版本：",releaseNotes:"发布说明",checkingPrereqs:"正在检查前提条件...",sdCardReady:"SD 卡已就绪。点击下方上传固件。",uploadedSuccess:"固件已上传到 SD 卡！",applyInstructions:"在打印机上应用更新：",step1:"在打印机触摸屏上，前往<strong>设置</strong>",step2:"导航到<strong>固件</strong>",step3:"选择<strong>从 SD 卡更新</strong>",step4:"更新将需要 10-20 分钟",done:"完成",starting:"启动中...",uploadFirmware:"上传固件",uploadFailed:"上传启动失败：{{error}}",uploadedToast:"固件已上传！请在打印机屏幕上触发更新。",availableVersions:"可用版本",usable:"可用",unavailable:"不可用",installed:"已安装",newerBadge:"较新",olderBadge:"较旧",currentBadge:"当前"},accessCodePlaceholder:"留空以保持当前值",roi:{title:"检测区域 (ROI)",xStart:"X 起点",yStart:"Y 起点",width:"宽度",height:"高度",instruction:"调整检测区域以聚焦到构建板。预览中的绿色框显示当前区域。"},developerModeWarning:"以下打印机未启用开发者局域网模式：{{names}}。某些功能可能无法使用。",howToEnable:"如何启用",incompatibleFile:"此文件是为 {{slicedFor}} 切片的，但该打印机是 {{printerModel}}",dropNotPrintable:"只能打印 .gcode 和 .gcode.3mf 文件",dropToPrint:"拖放以打印",cannotPrint:"打印机忙碌"},archives:{title:"打印归档",searchPlaceholder:"搜索归档...",filterByPrinter:"按打印机筛选",filterByStatus:"按状态筛选",sortBy:"排序方式",sortNewest:"最新优先",sortOldest:"最旧优先",sortName:"名称",sortDuration:"时长",sortLargest:"最大优先",sortSmallest:"最小优先",sortSize:"大小",noArchives:"未找到归档",noArchivesSearch:"没有匹配搜索的归档",originalPrintNotVisible:"原始打印不可见 - 请尝试清除筛选条件",noArchivesYet:"暂无归档",prints:"条打印",pagination:{showing:"显示",to:"至",of:"共",show:"每页",page:"页",all:"全部"},loadingArchives:"加载归档中...",releaseToUpload:"释放以上传",showAll:"显示全部",showFavoritesOnly:"仅显示收藏",gridView:"网格视图",listView:"列表视图",calendarView:"日历视图",logView:"打印日志",manageTags:"管理标签",showFailedPrints:"显示失败的打印",hideFailedPrints:"隐藏失败的打印",hideDuplicates:"隐藏重复项",viewOriginalPrint:"点击查看原始打印 (#{{id}})",printTime:"打印时间",filamentUsed:"耗材用量",cost:"成本",reprint:"重新打印",preview:"预览",deleteArchive:"删除归档",deleteConfirm:"确定要删除此归档吗？",favorite:"收藏",unfavorite:"取消收藏",viewDetails:"查看详情",status:{completed:"已完成",failed:"失败",stopped:"已停止"},toast:{source3mfAttached:"源 3MF 已附加：{{filename}}",failedUploadSource3mf:"上传源 3MF 失败",source3mfRemoved:"源 3MF 已移除",failedRemoveSource3mf:"移除源 3MF 失败",f3dAttached:"F3D 已附加：{{filename}}",failedUploadF3d:"上传 F3D 失败",f3dRemoved:"F3D 已移除",failedRemoveF3d:"移除 F3D 失败",timelapseAttached:"延时摄影已附加：{{filename}}",timelapseAlreadyAttached:"延时摄影已附加",noMatchingTimelapse:"未找到匹配的延时摄影",failedScanTimelapse:"扫描延时摄影失败",failedAttachTimelapse:"附加延时摄影失败",timelapseRemoved:"延时摄影已移除",failedRemoveTimelapse:"移除延时摄影失败",timelapseUploaded:"延时摄影已上传：{{filename}}",failedUploadTimelapse:"上传延时摄影失败",archiveDeleted:"归档已删除",failedDeleteArchive:"删除归档失败",addedToFavorites:"已添加到收藏",removedFromFavorites:"已从收藏中移除",projectUpdated:"项目已更新",failedUpdateProject:"更新项目失败",linkCopied:"链接已复制到剪贴板",failedCopyLink:"复制链接失败",photoDeleted:"照片已删除",failedDeletePhoto:"删除照片失败",failedDeleteArchives:"删除归档失败",failedUpdateFavorites:"更新收藏失败",exportDownloaded:"导出已下载",exportFailed:"导出失败"},menu:{print:"打印",schedule:"排程",openInBambuStudio:"在切片软件中打开",slice:"切片",externalLink:"外部链接",viewOnMakerWorld:"在 MakerWorld 上查看",preview3d:"3D 预览",viewTimelapse:"查看延时摄影",scanForTimelapse:"扫描延时摄影",uploadTimelapse:"上传延时摄影",removeTimelapse:"移除延时摄影",downloadSource3mf:"下载源 3MF",uploadSource3mf:"上传源 3MF",replaceSource3mf:"替换源 3MF",removeSource3mf:"移除源 3MF",uploadF3d:"上传 F3D",replaceF3d:"替换 F3D",downloadF3d:"下载 F3D",removeF3d:"移除 F3D",download:"下载",copyDownloadLink:"复制下载链接",qrCode:"二维码",viewPhotos:"查看照片",viewPhotosCount:"查看照片 ({{count}})",projectPage:"项目页面",addToFavorites:"添加到收藏",removeFromFavorites:"从收藏中移除",edit:"编辑",printLog:"打印记录",goToProject:"前往项目：{{name}}",addToProject:"添加到项目",removeFromProject:"从项目中移除",loading:"加载中...",noProjectsAvailable:"无可用项目",searchProjects:"搜索项目…",select:"选择",deselect:"取消选择",delete:"删除"},permission:{noReprint:"您没有重新打印此归档的权限",noAddToQueue:"您没有添加到队列的权限",noUpdateArchives:"您没有更新归档的权限",noUploadFiles:"您没有上传文件的权限",noDownload:"您没有下载归档的权限",noCopyLink:"您没有复制下载链接的权限",noDelete:"您没有删除此归档的权限",noCreate:"您没有创建归档的权限"},platePicker:{title:"选择要预览的打印板",hint:"此存档包含多个打印板。选择一个在 GCode 查看器中打开。",plateLabel:"打印板 {{index}}",objectCount:"{{count}} 个对象",objectCount_plural:"{{count}} 个对象",noGcode:"此存档没有可预览的已切片 G 代码。请先在 Bambu Studio 中打开并切片。"},card:{previousPlate:"上一个板",nextPlate:"下一个板",plateNumber:"板 {{index}}",moreOptions:"右键查看更多选项",addToFavorites:"添加到收藏",removeFromFavorites:"从收藏中移除",cancelled:"已取消",failed:"失败",duplicate:"重复",duplicateTitle:"此模型之前已打印过",openSource3mf:"在 Bambu Studio 中打开源 3MF（右键查看更多选项）",downloadF3d:"下载 Fusion 360 设计文件",viewTimelapse:"查看延时摄影",viewPhoto:"查看 1 张照片",viewPhotos:"查看 {{count}} 张照片",openFolder:"打开文件夹：{{name}}",slicedFile:"已切片文件 - 可以打印",sourceFile:"仅源文件 - 无 AMS 映射可用",gcode:"GCODE",source:"源文件",project:"项目：{{name}}",runsBadge:"{{count}} 次打印",runsBadgeTitle:"共 {{count}} 次打印 — 成功 {{successful}} 次，失败 {{failed}} 次。点击查看完整打印记录。",estimated:"预计：{{time}}",actual:"实际：{{time}}",accuracy:"准确度：{{percent}}%",filament:"{{weight}} 克",layer:"{{count}} 层",layers:"{{count}} 层",object:"{{count}} 个对象",objects:"{{count}} 个对象",slicedFor:"为 {{model}} 切片",uploadedBy:"上传者",noPermissionReprint:"您没有重新打印的权限",noFileForReprint:"无可用的 3MF 文件 — 打印记录时无法从打印机下载该文件",noPermissionEdit:"您没有编辑归档的权限",noPermissionDelete:"您没有删除归档的权限",reprint:"重新打印",schedulePrint:"排程打印",schedule:"排程",openInBambuStudio:"在切片软件中打开",openInBambuStudioToSlice:"在切片软件中打开进行切片",slice:"切片",externalLink:"外部链接",makerWorld:"MakerWorld：{{designer}}",viewProject:"查看项目",noExternalLink:"无外部链接",preview3d:"3D 预览",download:"下载",edit:"编辑",delete:"删除"},runLog:{title:"打印记录",modalTitle:"打印记录 — {{name}}",modalTitleFallback:"此归档",empty:"此归档尚未记录任何打印事件。",col:{date:"日期",status:"状态",duration:"时长",filament:"耗材",cost:"成本"},status:{completed:"已完成",failed:"失败",cancelled:"已取消",stopped:"已停止",skipped:"已跳过",printing:"打印中"}},modal:{deleteArchive:"删除归档",deleteConfirm:'确定要删除"{{name}}"吗？此操作无法撤销。',deleteButton:"删除",deletePurgeStats:"同时从快速统计中删除此打印（耗材、时间、成本、能耗）",removeSource3mf:"移除源 3MF",removeSource3mfConfirm:'确定要从"{{name}}"中移除源 3MF 文件吗？这将删除原始切片项目文件。',removeButton:"移除",removeF3d:"移除 F3D",removeF3dConfirm:'确定要从"{{name}}"中移除 Fusion 360 设计文件吗？',removeTimelapse:"移除延时摄影",removeTimelapseConfirm:'确定要从"{{name}}"中移除延时摄影视频吗？',timelapse:"{{name}} - 延时摄影",selectTimelapse:"选择延时摄影",selectTimelapseDesc:"未找到自动匹配。请选择此打印的延时摄影：",deleteArchives:"删除归档",deleteArchivesConfirm:"确定要删除 {{count}} 个归档吗？此操作无法撤销。",deleteCount:"删除 {{count}} 个"},page:{title:"归档",printsCount:"{{filtered}} / {{total}} 次打印",dropFilesHere:"将 .3mf 文件拖放到此处",releaseToUpload:"释放以上传",only3mfSupported:"仅支持 .3mf 文件",close:"关闭",selected:"已选择 {{count}} 个",selectAll:"全选",tags:"标签",project:"项目",favorite:"收藏",delete:"删除",toggledFavorites:"已切换 {{count}} 个归档的收藏状态",failedUpdateFavorites:"更新收藏失败",archivesDeleted:"已删除 {{count}} 个归档",failedDeleteArchives:"删除归档失败",photoDeleted:"照片已删除",failedDeletePhoto:"删除照片失败"},list:{name:"名称",printer:"打印机",date:"日期",size:"大小",actions:"操作",hasTimelapse:"有延时摄影"},log:{date:"日期",printName:"打印名称",printer:"打印机",user:"用户",status:"状态",duration:"时长",filament:"耗材",allPrinters:"所有打印机",allUsers:"所有用户",allStatuses:"所有状态",cancelled:"已取消",skipped:"已跳过",dateFrom:"从",dateTo:"到",noEntries:"未找到打印日志条目",showing:"显示 {{count}} / {{total}} 条",rowsPerPage:"行数",page:"页",prev:"上一页",next:"下一页",clearLog:"清除日志",clearLogTitle:"清除打印日志",clearLogConfirm:"所有打印日志条目将被永久删除。归档和队列项目不受影响。此操作无法撤销。确定要继续吗？",clearLogButton:"全部清除",cleared:"已清除 {{count}} 条日志",clearFailed:"清除打印日志失败"}},queue:{filamentShort:{rowBadge:"所分配料盘的耀丝不足",rowTooltip:"调度程序已标记该项。点击播放查看各插槽的赤字并决定是否仍要打印。",confirmTitle:"耀丝不足",confirmIntro:"所分配的料盘至少有一个插槽无法满足。仍要打印吗？",lineItem:"插槽 {{slot}}：需要 {{required}} g，剩余 {{remaining}} g",unknown:"未知",printAnyway:"仍要打印"},title:"打印队列",subtitle:"排程和管理您的打印任务",addToQueue:"添加到队列",print:"打印",reprint:"重新打印",schedulePrint:"排程打印",editQueueItem:"编辑队列项目",printToPrinters:"打印到 {{count}} 台打印机",queueToPrinters:"排队到 {{count}} 台打印机",queueSelectedPlates:"将 {{count}} 个热床加入队列",selectAllPlates:"选择全部 {{count}} 个热床",deselectAll:"取消全选",printQueued:"已加入打印队列",itemsQueued:"{{count}} 个任务已加入队列",sending:"发送中...",sendingProgress:"发送中 {{current}}/{{total}}...",adding:"添加中...",addingProgress:"添加中 {{current}}/{{total}}...",savingProgress:"保存中 {{current}}/{{total}}...",clearQueue:"清空队列",clearHistory:"清除历史",emptyQueue:"队列为空",position:"位置",scheduledTime:"排程时间",moveUp:"上移",moveDown:"下移",startNow:"立即开始",printingInProgress:"打印进行中...",viewArchive:"查看归档",viewInFileManager:"在文件管理器中查看",itemCount:"{{count}} 个项目",itemCount_plural:"{{count}} 个项目",dragToReorder:"拖动以重新排序（仅限尽快）",reorderHint:'位置仅影响"尽快"项目。排程项目按设定时间运行。',sjf:{label:"SJF",tooltip:"最短任务优先 — 调度器优先处理较短的打印任务"},addedBy:"由 {{name}} 添加",nextInQueue:"队列中的下一个",clearPlateSuccess:"打印板已清理 — 准备进行下一个打印",plateNumber:"板 {{index}}",quantity:"数量",quantityHint:"创建 {{count}} 个队列项目",activeBatches:"活跃批次",batchProgress:"已完成 {{completed}}/{{total}}",cancelBatch:"取消剩余",batchCancelled:"已取消剩余批次项目",cancelBatchConfirmTitle:"取消批次",cancelBatchConfirmMessage:"取消此批次中所有剩余的待处理项目？",batch:"批次",sections:{currentlyPrinting:"正在打印",queued:"排队中",history:"历史"},status:{pending:"等待中",waiting:"等待中",printing:"打印中",paused:"已暂停",completed:"已完成",failed:"失败",skipped:"已跳过",cancelled:"已取消"},summary:{printing:"打印中",queued:"排队中",totalTime:"总队列时间",totalWeight:"总队列重量",history:"历史"},filter:{allPrinters:"所有打印机",unassigned:"未分配",allStatus:"所有状态",allLocations:"所有位置",any:"任意"},sort:{byPosition:"按位置排序",byName:"按名称排序",byPrinter:"按打印机排序",bySchedule:"按排程排序",byDate:"按日期排序",ascendingOldest:"升序（最旧优先）",descendingNewest:"降序（最新优先）"},badges:{staged:"已暂存",requiresPrevious:"需要前一个成功",autoPowerOff:"自动关机",gcodeInjection:"G-code"},empty:{title:"没有排程的打印",description:'从归档页面使用右键菜单中的"排程"选项来排程打印，或拖放文件开始。'},time:{asap:"尽快",overdue:"已逾期",now:"现在",lessThanMinute:"不到一分钟",inMinutes:"{{count}} 分钟后",inHours:"{{count}} 小时后"},actions:{stopPrint:"停止打印",startPrint:"开始打印",requeue:"重新排队"},bulkEdit:{title:"编辑 {{count}} 个项目",title_plural:"编辑 {{count}} 个项目",description:"仅更改的设置将应用于所选项目。",printer:"打印机",noChange:"— 不更改 —",queueOptions:"队列选项",staged:"暂存（手动开始）",autoPowerOff:"打印后自动关机",requirePrevious:"要求前一个成功",printOptions:"打印选项",bedLevelling:"热床调平",flowCalibration:"流量校准",vibrationCalibration:"振动校准",layerInspection:"首层检查",timelapse:"延时摄影",useAms:"使用 AMS",applyChanges:"应用更改",selectAll:"全选",deselectAll:"取消全选",selected:"已选择 {{count}} 个",editSelected:"编辑所选",cancelSelected:"取消所选"},confirm:{cancelTitle:"取消排程打印",cancelMessage:'确定要取消"{{name}}"吗？',stopTitle:"停止打印",stopMessage:'确定要停止当前打印"{{name}}"吗？这将取消打印机上的打印任务。',removeTitle:"从历史中移除",removeMessage:'确定要从队列历史中移除"{{name}}"吗？',clearHistoryTitle:"清除历史",clearHistoryMessage:"确定要从历史中移除所有 {{count}} 个项目吗？",cancelButton:"取消打印",stopButton:"停止打印",thisPrint:"此打印",thisItem:"此项目"},toast:{cancelled:"队列项目已取消",cancelFailed:"取消项目失败",removed:"队列项目已移除",removeFailed:"移除项目失败",stopped:"打印已停止",stopFailed:"停止打印失败",released:"打印已释放到队列",startFailed:"开始打印失败",reorderFailed:"重新排序队列失败",historyCleared:"已清除 {{count}} 条历史记录",clearHistoryFailed:"清除历史失败",updateFailed:"更新项目失败",bulkCancelled:"已取消 {{count}} 个项目",bulkCancelFailed:"批量取消项目失败"},timeline:{listView:"列表",timelineView:"时间线",unassigned:"未分配",noData:"当天没有计划的打印任务",allDoneBy:"所有打印预计在 {{time}} 前完成",staged:"暂存",filterAll:"全部显示",filterPrinting:"打印中",filterQueued:"排队中",time:{anyMoment:"即将完成",minutesLeft:"剩余{{minutes}}分钟",hoursLeft:"剩余{{hours}}小时",hoursMinutesLeft:"剩余{{hours}}小时{{minutes}}分钟"},day:{previous:"前一天",next:"后一天",today:"今天"}},permissions:{noStopPrint:"您没有停止打印的权限",noStartPrint:"您没有开始打印的权限",noEdit:"您没有编辑此队列项目的权限",noCancel:"您没有取消此队列项目的权限",noRequeue:"您没有重新排队的权限",noRemove:"您没有移除此队列项目的权限",noClearHistory:"您没有清除所有历史的权限",noEditItems:"您没有编辑队列项目的权限",noCancelItems:"您没有取消队列项目的权限"}},backgroundDispatch:{unknownFile:"未知文件",unknownPrinter:"未知打印机",startingPrints:"正在开始打印",progressSummary:"{{complete}}/{{total}} 完成 • 已分发：{{dispatched}} • 处理中：{{processing}}",expandDetails:"展开分发详情",collapseDetails:"收起分发详情",dismissToast:"关闭分发通知",cancelDispatchJob:"取消分发任务",cancel:"取消",cancelling:"取消中…",awaitingPrinter:"等待打印机…",status:{dispatched:"已分发",processing:"处理中",completed:"已完成",failed:"失败",cancelled:"已取消"},toast:{cancellingUpload:"取消上传中...",cancelled:"分发已取消",cancelFailed:"取消分发失败",completeWithFailures:"后台分发完成：{{completed}} 成功，{{failed}} 失败",completeSuccess:"后台分发完成：{{completed}} 成功",printStartedRemaining:"{{completed}} 个打印已开始，{{remaining}} 个正在发送..."}},stats:{title:"统计",subtitle:"拖动小部件以重新排列。点击眼睛图标隐藏。",overview:"概览",totalPrints:"总打印次数",successRate:"成功率",totalPrintTime:"总打印时间",printTime:"打印时间",totalFilament:"总耗材用量",filamentUsed:"耗材用量",filamentCost:"耗材成本",totalCost:"总成本",energyUsed:"能耗",energyCost:"能源成本",energyWarmingUpTooltip:"能耗追踪正在收集每小时快照。当所选范围之前至少存在一个快照时，时间段合计将变得准确。早期数值可能偏低。",averagePrintTime:"平均打印时间",printsPerDay:"每日打印次数",byPrinter:"按打印机",printsByPrinter:"各打印机打印次数",byMaterial:"按材料",byMonth:"按月份",last7Days:"最近 7 天",last30Days:"最近 30 天",last90Days:"最近 90 天",allTime:"全部时间",quickStats:"快速统计",printActivity:"打印活动",filamentTypes:"耗材类型",filamentTrends:"耗材趋势",failureAnalysis:"失败分析",timeAccuracy:"时间准确度",successful:"成功：",failed:"失败：",cancelled:"已取消：",perfectEstimate:"100% = 完美估计",noTimeAccuracyData:"暂无时间准确度数据",noFilamentData:"暂无耗材数据",noPrinterData:"暂无打印机数据",noPrintData:"暂无打印数据",noPrintDataLast30Days:"最近 30 天无打印数据",failureReasons:"失败原因",topFailureReasons:"主要失败原因",failedPrintsCount:"{{failed}} / {{total}} 次打印失败",lastWeekRate:"上周：{{rate}}%",resetLayout:"重置布局",recalculateCosts:"重新计算成本",recalculateCostsHint:"使用当前耗材价格重新计算所有归档成本",exportStats:"导出统计",exportAsCsv:"导出为 CSV",exportAsExcel:"导出为 Excel",hiddenCount:"{{count}} 个已隐藏",exportDownloaded:"导出已下载",exportFailed:"导出失败",layoutReset:"布局已重置",recalculatedCosts:"已为 {{count}} 个归档重新计算成本",recalculateFailed:"重新计算成本失败",loadingStats:"加载统计数据中...",noPermissionResetLayout:"您没有重置布局的权限",noPermissionRecalculate:"您没有重新计算成本的权限",noPrintDataInRange:"所选范围内无打印数据",periodFilament:"期间耗材",periodCost:"期间成本",avgPerPrint:"每次打印平均",usageOverTime:"随时间的使用量",filamentByWeight:"重量",printDuration:"打印时长",printerUtilization:"打印机利用率",filamentSuccess:"按材料成功率",printHabits:"打印习惯",printTimeOfDay:"打印时段",colorDistribution:"颜色分布",noColorData:"暂无颜色数据",records:"记录",longestPrint:"最长打印",heaviestPrint:"最重打印",mostExpensivePrint:"最贵打印",busiestDay:"最忙碌的一天",successStreak:"连续成功",streakPrint:"连续打印",streakPrints:"{{count}} 次连续打印",printerStats:"打印机统计",hours:"小时",avgPrints:"平均打印",noArchiveData:"暂无打印数据",filamentByTime:"时间",avgWeight:"平均重量",avgTime:"平均时间",filamentByPrints:"打印次数",timeframe:{today:"今天","this-week":"本周","this-month":"本月","last-7":"最近 7 天","last-30":"最近 30 天","last-90":"最近 90 天","this-year":"今年","all-time":"全部时间",custom:"自定义范围",from:"从",to:"到"},allUsers:"所有用户",noUser:"无用户（系统）",filterByUser:"按用户筛选"},maintenance:{title:"维护",overview:"概览",allOk:"所有维护均已完成",dueCount:"{{count}} 项到期",dueCount_plural:"{{count}} 项到期",warningCount:"{{count}} 个警告",warningCount_plural:"{{count}} 个警告",totalPrintTime:"总打印时间",nextMaintenance:"下次维护",nothingDue:"无到期项目",tasks:"任务",lastPerformed:"上次执行",interval:"间隔",hoursRemaining:"剩余 {{hours}} 小时",hoursOverdue:"逾期 {{hours}} 小时",markDone:"标记为完成",performMaintenance:"执行维护",history:"历史",noHistory:"无维护历史",editPrintHours:"编辑打印时间",currentHours:"当前小时数",statusTab:"状态",settingsTab:"设置",overdueCount:"{{count}} 个逾期",dueSoonCount:"{{count}} 个即将到期",dueSoon:"即将到期",allGood:"一切正常",overdueBy:"逾期 {{duration}}",dueIn:"{{duration}} 后到期",timeLeft:"剩余 {{duration}}",day:"1 天",days:"{{count}} 天",week:"1 周",weeks:"{{count}} 周",month:"1 个月",months:"{{count}} 个月",year:"1 年",maintenanceTypes:"维护类型",maintenanceTypesDescription:"系统类型和您的自定义维护任务",addCustomType:"添加自定义类型",restoreDefaults:"恢复默认任务",intervalType:"间隔类型",intervalValue:"间隔 ({{type}})",icon:"图标",documentationLink:"文档链接（可选）",assignToPrinters:"分配给打印机",selectAtLeastOnePrinter:"至少选择一台打印机",addType:"添加类型",custom:"自定义",printHours:"打印小时数",calendarDays:"日历天数",exampleName:"例如：更换 HEPA 过滤器",viewDocumentation:"查看文档",timeBasedInterval:"基于时间的间隔",intervalOverrides:"间隔覆盖",intervalOverridesDescription:"为特定打印机自定义间隔",assignedToPrinters:"已分配给打印机：",noPrintersAssigned:"未分配打印机",addPrinterShort:"添加：",printersAssignedClick:"已分配 {{count}} 台打印机 - 点击管理",removeFromPrinter:"从此打印机移除",types:{lubricateCarbonRods:"润滑碳纤维杆",lubricateRails:"润滑线性导轨",cleanNozzle:"清洁喷嘴/热端",checkBelts:"检查皮带张力",cleanBuildPlate:"清洁构建板",checkExtruder:"检查挤出机齿轮",checkCooling:"检查冷却风扇",generalInspection:"综合检查",cleanCarbonRods:"清洁碳纤维杆",lubricateSteelRods:"润滑钢杆",cleanSteelRods:"清洁钢杆",cleanLinearRails:"清洁线性导轨",checkPtfeTube:"检查 PTFE 管",replaceHepaFilter:"更换 HEPA 过滤器",replaceCarbonFilter:"更换活性炭过滤器",lubricateLeftNozzleRail:"润滑左喷嘴导轨"},maintenanceComplete:"维护已标记为完成",typeUpdated:"维护类型已更新",typeDeleted:"维护类型已删除",defaultsRestored:"已恢复 {{count}} 个默认任务",printHoursUpdated:"打印小时数已更新",printerAssigned:"打印机已分配",printerRemoved:"打印机已移除",deleteTypeConfirm:'删除"{{name}}"？',deleteSystemTypeTitle:"删除默认维护任务？",deleteSystemTypeMessage:'确定要删除默认维护任务"{{name}}"吗？',noPermissionUpdate:"您没有更新维护项目的权限",noPermissionPerform:"您没有执行维护的权限",noPermissionEditTypes:"您没有编辑维护类型的权限",noPermissionDeleteTypes:"您没有删除维护类型的权限",noPermissionEditHours:"您没有编辑打印时间的权限",noPermissionRemovePrinter:"您没有移除打印机分配的权限",noPermissionAssignPrinter:"您没有分配打印机的权限",noPermissionEditIntervals:"您没有编辑间隔的权限",configureSettings:"配置维护类型和间隔"},settings:{title:"设置",general:"通用",tabs:{general:"通用",smartPlugs:"智能插座",notifications:"通知",queue:"工作流",filament:"耗材",network:"网络",apiKeys:"API 密钥",virtualPrinter:"虚拟打印机",spoolbuddy:"SpoolBuddy",failureDetection:"故障检测",users:"身份验证",backup:"备份",emailAuth:"邮箱认证",ldap:"LDAP",twoFa:"双因素认证",oidc:"SSO / OIDC",security:"安全"},spoolbuddy:{infoTitle:"SpoolBuddy 设备",infoBody:"SpoolBuddy kiosk 通过心跳自动注册。如果设备不再使用，或守护进程崩溃遗留了陈旧的重复项，可在此注销。",duplicatesTitle:"已注册 {{count}} 台设备",duplicatesBody:"kiosk 界面只使用最先注册的设备。如果其中有因崩溃遗留的陈旧重复项，请注销它——在线设备会在下次心跳时重新注册自己。",empty:"尚未注册任何 SpoolBuddy 设备。",online:"在线",offline:"离线",unregister:"注销",unregisterSuccess:"设备已注销",unregisterError:"注销设备失败",confirmTitle:"注销 SpoolBuddy 设备？",confirmBody:'将从数据库中移除 "{{hostname}}" ({{deviceId}})。如果设备在线，会在下次心跳时重新注册自己。',ipAddress:"IP 地址",firmware:"固件",lastSeen:"上次在线",daemonUptime:"守护进程运行时间",systemUptime:"系统运行时间",never:"从未",nfc:"NFC",scale:"秤",cpuTemp:"CPU 温度",cpuLoad:"CPU 负载",memory:"内存",disk:"磁盘",update:"更新",updateConfirmTitle:"更新 SpoolBuddy 守护进程？",updateConfirmBody:'对 "{{hostname}}" 触发软件更新？更新完成后守护进程将重启。',restartBrowser:"重启浏览器",restartBrowserConfirmTitle:"重启 kiosk 浏览器？",restartBrowserConfirmBody:'在 "{{hostname}}" 上重启 kiosk 浏览器？显示将短暂黑屏。',restartDaemon:"重启守护进程",restartDaemonConfirmTitle:"重启 SpoolBuddy 守护进程？",restartDaemonConfirmBody:'在 "{{hostname}}" 上重启 SpoolBuddy 守护进程？设备将离线几秒钟。',reboot:"重启",rebootConfirmTitle:"重启设备？",rebootConfirmBody:'重启 "{{hostname}}"？设备将离线约一分钟。',shutdown:"关机",shutdownConfirmTitle:"关闭设备？",shutdownConfirmBody:'关闭 "{{hostname}}"？您需要物理访问才能重新开机。',commandConfirm:"确认",commandQueued:"命令已加入队列",commandError:"发送命令失败"},ldap:{title:"LDAP 认证",enabledDesc:"LDAP 认证已启用",disabledDesc:"LDAP 认证已禁用",disabledHint:"在下方配置并保存 LDAP 设置，然后启用。",enabled:"LDAP 认证已启用",disabled:"LDAP 认证已禁用",feature1:"用户可以使用 LDAP 凭据登录",feature2:"本地管理员帐户作为后备保留",feature3:"登录时 LDAP 组映射到 BamBuddy 组",serverConfig:"LDAP 服务器配置",serverUrl:"服务器 URL",serverUrlHint:"使用 ldap:// 进行标准连接或 ldaps:// 进行 SSL 连接",security:"安全",securityHint:"StartTLS 将普通连接升级为 TLS。LDAPS 从一开始就使用 TLS。",bindDn:"绑定 DN（服务帐户）",bindPassword:"绑定密码",searchBase:"搜索基础 DN",userFilter:"用户搜索过滤器",userFilterHint:"{username} 替换为登录用户名。OpenLDAP 使用 (uid={username})。",advanced:"高级",autoProvision:"自动创建用户",autoProvisionHint:"首次 LDAP 登录时自动创建 BamBuddy 帐户",defaultGroup:"默认组",defaultGroupNone:"— 无（无回退）—",defaultGroupHint:"当 LDAP 用户通过身份验证但不在任何已映射的 LDAP 组中时分配的回退组。留空以使未映射的用户没有权限。",groupMapping:"组映射（JSON）",groupMappingHint:"将 LDAP 组 DN 映射到 BamBuddy 组。可用组：",testConnection:"测试连接",settingsSaved:"LDAP 设置已保存",errors:{serverRequired:"LDAP 服务器 URL 为必填项",searchBaseRequired:"搜索基础 DN 为必填项",enableAuthFirst:"请先启用认证",configureLdapFirst:"请先保存 LDAP 设置"}},email:{smtpSettings:"SMTP 配置",smtpHost:"SMTP 服务器",smtpPort:"SMTP 端口",security:"安全",authentication:"认证",username:"用户名",password:"密码",fromEmail:"发件邮箱",fromName:"发件人名称",testConnection:"测试 SMTP 连接",testRecipient:"测试收件邮箱",sendTest:"发送测试邮件",sending:"发送中...",save:"保存设置",saving:"保存中...",advancedAuth:"高级认证",advancedAuthEnabled:"高级认证已启用",advancedAuthEnabledDesc:"基于邮箱的用户管理功能已激活。新用户将通过邮件收到自动生成的密码，用户可以通过忘记密码功能重置密码。",advancedAuthDisabled:"高级认证已禁用",advancedAuthDisabledDesc:"启用高级认证以激活基于邮箱的用户管理功能。",enable:"启用",disable:"禁用",feature1:"密码自动生成并通过邮件发送给新用户",feature2:"用户可以使用用户名或邮箱登录",feature3:"忘记密码功能可用",feature4:"管理员可以通过邮件重置用户密码",errors:{requiredFields:"请填写所有必填字段",usernameRequired:"启用认证时需要用户名",enterTestEmail:"请输入测试邮箱地址",smtpServerAndEmail:"测试前请填写 SMTP 服务器和发件邮箱",usernamePasswordRequired:"启用认证时需要用户名和密码",configureSmtpFirst:"请先配置并测试 SMTP 设置",enableAuthFirst:"请先启用身份验证才能使用基于电子邮件的功能。"},success:{settingsSaved:"SMTP 设置保存成功"},securityOptions:{starttls:"STARTTLS（端口 587）",ssl:"SSL/TLS（端口 465）",none:"无（端口 25）"},authOptions:{enabled:"已启用",disabled:"已禁用"}},appearance:"外观",notifications:"通知",smartPlugs:"智能插座",spoolman:"Spoolman",updates:"更新",language:"语言",languageDescription:"选择您的首选语言",theme:"主题",themeLight:"浅色",themeDark:"深色",themeSystem:"跟随系统",defaultView:"默认视图",defaultViewDescription:"打开应用时显示的页面",checkForUpdates:"检查更新",autoUpdate:"自动更新",currentVersion:"当前版本",latestVersion:"最新版本",upToDate:"已是最新版本",updateAvailable:"有可用更新",notificationLanguage:"通知语言",notificationLanguageDescription:"推送通知的语言",bedCooledThreshold:"热床冷却阈值",bedCooledThresholdDescription:"打印后热床被视为已冷却的温度",userNotificationsEnabled:"用户通知",userNotificationsEnabledDescription:"启用用户通知菜单和打印任务事件的邮件通知。需要高级身份验证。",userNotificationsDisabledHint:"请启用高级身份验证以使用用户通知。",notificationProviders:"通知提供商",addProvider:"添加提供商",editProvider:"编辑提供商",providerType:"提供商类型",testNotification:"测试通知",testSuccess:"测试通知发送成功",testFailed:"发送测试通知失败",quietHours:"免打扰时间",quietHoursDescription:"在此时间段内不发送通知",quietHoursStart:"开始",quietHoursEnd:"结束",events:{title:"通知事件",printStart:"打印开始",printComplete:"打印完成",printFailed:"打印失败",printStopped:"打印停止",printProgress:"进度里程碑",printProgressDescription:"在 25%、50%、75% 时通知",printerOffline:"打印机离线",printerError:"打印机错误",filamentLow:"耗材不足",maintenanceDue:"维护到期",maintenanceDueDescription:"需要维护时通知"},smartPlug:{title:"智能插座",add:"添加智能插座",edit:"编辑智能插座",name:"名称",ipAddress:"IP 地址",linkedPrinter:"关联打印机",autoOn:"自动开启",autoOnDescription:"打印开始时开启",autoOff:"自动关闭",autoOffDescription:"打印完成后关闭",offDelay:"关闭延迟",offDelayMinutes:"打印后分钟数",offDelayTemp:"当喷嘴温度低于",currentState:"当前状态",turnOn:"开启",turnOff:"关闭"},filamentTracking:"耗材追踪",filamentTrackingDesc:"选择如何追踪您的耗材。您可以使用内置库存或连接外部 Spoolman 服务器。",filamentChecks:"耗材检查",disableFilamentWarnings:"禁用耗材警告",disableFilamentWarningsDesc:"在打印或加入队列时不显示耗材不足警告",preferLowestFilament:"优先使用剩余最少的耗材",preferLowestFilamentDesc:"当多个料盘匹配时，使用剩余耗材最少的那个",trackingModeBuiltIn:"内置库存",trackingModeBuiltInDesc:"包含 RFID 自动匹配和用量追踪",trackingModeSpoolmanDesc:"外部耗材管理服务器",builtInFeatureRfid:"自动检测 AMS 中的拓竹 RFID 耗材",builtInFeatureUsage:"追踪每次打印的耗材消耗",builtInFeatureCatalog:"管理耗材、颜色和 K 值配置文件",builtInFeatureThirdParty:"第三方耗材可分配到库存耗材",amsSyncButton:"从 AMS 同步重量",amsSyncTitle:"从 AMS 同步耗材重量",amsSyncMessage:"这将使用已连接打印机的当前 AMS 剩余百分比值覆盖所有库存耗材重量。用于从损坏的重量数据中恢复。打印机必须在线。",amsSyncing:"同步中...",amsSyncSuccess:"已同步 {{synced}} 个耗材，跳过 {{skipped}} 个",amsSyncError:"从 AMS 同步重量失败",spoolmanAmsSyncButton:"从 AMS 同步 Spoolman 重量",spoolmanAmsSyncTitle:"从 AMS 同步 Spoolman 耗材重量",spoolmanAmsSyncMessage:"这将根据已连接打印机的当前 AMS 剩余百分比值更新所有 Spoolman 耗材重量。打印机必须在线。",spoolmanAmsSyncing:"同步中...",spoolmanAmsSyncSuccess:"已同步 {{synced}} 个 Spoolman 耗材，跳过 {{skipped}} 个",spoolmanAmsSyncError:"从 AMS 同步 Spoolman 重量失败",spoolmanAmsSyncErrorUnreachable:"同步失败（Spoolman 不可访问）",spoolmanAmsSyncErrorNotConfigured:"同步失败（Spoolman 未配置）",spoolmanNotConfigured:"Spoolman 未配置",spoolmanFilamentCatalogTitle:"Spoolman 耗材目录",spoolmanFilamentCatalogDesc:"来自 Spoolman 的耗材名称和皮重。名称和线轴重量可在此处编辑；其他属性请直接在 Spoolman 中管理。",spoolmanUrl:"Spoolman URL",spoolmanUrlHint:"Spoolman 服务器的 URL（例如 http://localhost:7912）",spoolmanConnected:"已连接",spoolmanDisconnected:"未连接",status:"状态",connect:"连接",disconnect:"断开",howSyncWorks:"同步工作原理",syncInfoRfidOnly:"仅同步带有 RFID 的官方拓竹耗材",syncInfoAutoCreate:"首次同步时自动在 Spoolman 中创建新耗材",syncInfoThirdPartySkipped:"非拓竹耗材（第三方、重新填充的）将被跳过",linkingExistingSpools:"链接现有耗材",linkingExistingSpoolsDesc:'要将现有的 Spoolman 耗材链接到您的 AMS，请将鼠标悬停在 AMS 槽位上并点击"链接到 Spoolman"。',syncMode:"同步模式",syncModeAuto:"自动",syncModeManual:"仅手动",syncModeAutoDesc:"检测到更改时自动同步 AMS 数据",syncModeManualDesc:"仅在手动触发时同步",syncAmsData:"同步 AMS 数据",syncAmsDataDesc:"手动将打印机 AMS 数据同步到 Spoolman",allPrinters:"所有打印机",noDefaultPrinter:"无默认（每次询问）",sidebarOrder:"侧边栏顺序",saveThumbnails:"保存缩略图",captureFinishPhoto:"拍摄完成照片",noPrintersConfigured:"未配置打印机",archiveMode:{always:"始终创建归档条目",never:"从不创建归档条目",ask:"每次询问"},checkForUpdatesLabel:"检查更新",checkPrinterFirmware:"检查打印机固件",includeBetaUpdates:"包含测试版本",includeBetaUpdatesDesc:"检查更新时通知测试版和预发布版本",enableRetry:"启用重试",homeAssistantDescription:"通过 Home Assistant 控制智能插座",environmentManagedLabel:"（环境变量管理）",autoEnabledViaEnv:"通过环境变量自动启用",urlFromEnvReadOnly:"值由 HA_URL 环境变量设置（只读）",tokenFromEnvReadOnly:"值由 HA_TOKEN 环境变量设置（只读）",mqttConnectedTo:"已连接到",prometheusDescription:"以 Prometheus 格式暴露打印机数据",noSmartPlugsTitle:"未配置智能插座",noSmartPlugsDescription:"添加基于 Tasmota 的智能插座以追踪能耗并自动化电源控制。",noProvidersTitle:"未配置提供商",noProvidersDescription:"添加提供商以接收警报。",noTemplatesAvailable:"无可用模板。重启后端以加载默认模板。",apiPermissionView:"查看打印机状态和队列",apiPermissionEdit:"添加和移除打印队列中的项目",apiKeysEmptyTitle:"无 API 密钥",apiKeysEmptyDescription:"创建 API 密钥以与外部服务集成。",noUsersFound:"未找到用户",noGroupsFound:"未找到组",noGroupsAvailable:"无可用组",passwordsDoNotMatch:"密码不匹配",systemGroupWarning:"系统组名称不可更改",authDisabledTitle:"身份验证已禁用",authDisabledFeature1:"需要登录才能访问系统",authDisabledFeature2:"创建多个用户并基于组的权限管理",authDisabledFeature3:"使用 50+ 个细粒度权限控制访问",userHasCreated:"此用户已创建：",userItemsQuestion:"您想如何处理这些项目？",deleteUserConfirm:"确定要删除此用户吗？",actionCannotBeUndone:"此操作无法撤销。",addFirstSmartPlug:"添加您的第一个智能插座",providers:"提供商",log:"日志",testAll:"全部测试",testResults:"测试结果",testPassedCount:"{{count}} 个通过",testFailedCount:"{{count}} 个失败",messageTemplates:"消息模板",messageTemplatesDescription:"自定义每个事件的通知消息。",apiKeys:"API 密钥",apiKeysDescription:"创建 API 密钥用于外部集成和 Webhook。",createKey:"创建密钥",apiKeyCreated:"API 密钥创建成功",apiKeyCopyWarning:"请立即复制此密钥 - 它不会再次显示！",useInApiBrowser:"在 API 浏览器中使用",createNewApiKey:"创建新 API 密钥",keyName:"密钥名称",keyNamePlaceholder:"例如：Home Assistant、OctoPrint",readStatus:"读取状态",readStatusDescription:"查看打印机状态和队列",manageQueue:"管理队列",manageQueueDescription:"添加和移除打印队列中的项目",controlPrinter:"控制打印机",controlPrinterDescription:"暂停、继续和停止打印",manageLibrary:"管理资料库",manageLibraryDescription:"上传、重命名和删除资料库文件；从 MakerWorld 导入模型",manageInventory:"管理库存",manageInventoryDescription:"创建、更新和删除耗材盘以及库存记录。SpoolBuddy 终端（NFC 扫描、秤读取、终端系统命令）需要此权限。",libraryBadge:"资料库",inventoryBadge:"库存",cloudAccess:"允许云端访问",cloudAccessDescription:"代表您读取 Bambu Cloud 预设和耗材。需要登录 Bambu Cloud。",cloudBadge:"云端",updateEnergyCost:"更新电价",updateEnergyCostDescription:"允许此密钥向 /settings/electricity-price POST 新的每千瓦时电价。适用于 Home Assistant 动态电价自动化（Tibber、Octopus 等）。这是唯一可通过 API 密钥写入的设置字段。",energyCostBadge:"能耗",legacyKey:"传统",legacyKeyTooltip:"在按用户所有权之前创建；需重建以使用云端访问",unnamedKey:"未命名密钥",lastUsed:"上次使用",read:"读取",control:"控制",createFirstKey:"创建您的第一个密钥",webhookEndpoints:"Webhook 端点",webhookApiKeyHint:"在 X-API-Key 请求头中使用您的 API 密钥。",webhook:{getAllStatus:"获取所有打印机状态",getSpecificStatus:"获取特定打印机状态",addToQueue:"添加到打印队列",pausePrint:"暂停打印",resumePrint:"继续打印",stopPrint:"停止打印"},apiBrowser:"API 浏览器",apiBrowserDescription:"浏览和测试所有可用的 API 端点。",apiKeyForTesting:"测试用 API 密钥",apiKeyPlaceholder:"在此粘贴您的 API 密钥以测试需要认证的端点...",apiKeyHint:"此密钥将作为 X-API-Key 请求头随请求发送。",deleteApiKeyTitle:"删除 API 密钥",deleteApiKeyMessage:"确定要删除此 API 密钥吗？使用此密钥的所有集成将停止工作。",deleteKey:"删除密钥",amsDisplayThresholds:"AMS 显示阈值",amsThresholdsDescription:"配置 AMS 湿度和温度指示器的颜色阈值。",humidity:"湿度",goodGreen:"良好（绿色）",fairOrange:"一般（橙色）",aboveFairBad:"超过一般阈值显示为红色（差）",fairAlsoDryingThreshold:"此阈值也用于触发自动干燥",temperature:"温度",goodBlue:"良好（蓝色）",aboveFairHot:"超过一般阈值显示为红色（热）",historyRetention:"历史保留",keepSensorHistory:"保留传感器历史",historyRetentionDescription:"较旧的湿度和温度数据将被自动删除",defaultPrintOptions:"默认打印选项",defaultPrintOptionsDescription:"设置新打印的默认选项值。可在打印对话框中逐次覆盖。",defaultBedLevelling:"热床调平",defaultBedLevellingDesc:"打印前自动调平热床",defaultFlowCali:"流量校准",defaultFlowCaliDesc:"校准挤出流量",defaultVibrationCali:"振动校准",defaultVibrationCaliDesc:"减少振纹伪影",defaultLayerInspect:"首层检测",defaultLayerInspectDesc:"AI首层检测",defaultTimelapse:"延时摄影",defaultTimelapseDesc:"录制延时摄影视频",staggeredStart:"错峰启动",staggeredStartDescription:"错峰启动多台打印机批次时的默认组大小和间隔。可在打印对话框中按批次覆盖。",plateClear:"热床清空确认",requirePlateClear:"需要热床清空确认",requirePlateClearDescription:"启用后，调度器会在已完成打印的打印机上启动排队打印之前，等待每台打印机的热床清空确认。禁用后，也会隐藏打印机卡片上的打印板状态标记和“将打印板标记为已清理”按钮。",gcodeInjection:"G-code注入",gcodeInjectionDescription:'为Farmloop、SwapMod、AutoClear和Printflow 3D等自动打印系统配置自定义G-code，在打印开始和/或结束时注入。代码片段按打印机型号配置，在队列项目上启用"注入G-code"时应用。',gcodeInjectionNoPrinters:"未找到打印机。添加打印机以配置G-code代码片段。",gcodeStartLabel:"开始G-code",gcodeEndLabel:"结束G-code",gcodeStartPlaceholder:"在打印开始前插入的G-code...",gcodeEndPlaceholder:"在打印结束后追加的G-code...",staggerGroupSize:"组大小",staggerGroupSizeHelp:"每组同时启动的打印机数量",staggerInterval:"间隔（分钟）",staggerIntervalHelp:"每组启动之间的延迟",queueDrying:"自动干燥",queueDryingDescription:"在队列打印之间，打印机空闲时自动干燥AMS耗材。使用上方的湿度阈值触发干燥。",queueDryingEnabled:"启用自动干燥",queueDryingEnabledDescription:"当打印机空闲且湿度超过阈值时，自动启动AMS干燥",queueDryingBlock:"等待干燥完成",queueDryingBlockDescription:"阻止打印队列直到干燥完成。关闭时，打印优先于干燥。",ambientDryingEnabled:"环境干燥",ambientDryingEnabledDescription:"当空闲打印机的湿度超过阈值时自动干燥耗材，无需排队打印。",dryingPresets:"干燥预设",dryingPresetsDescription:"每种耗材类型的温度和时长。AMS 2 Pro使用较低温度，AMS-HT支持较高温度。",dryingFilament:"耗材",printModal:"打印对话框",expandCustomMapping:"默认展开自定义映射",expandCustomMappingDescription:"打印到多台打印机时，默认展开显示每台打印机的 AMS 映射",authentication:"身份验证",authEnabledDescription:"您的实例已通过用户身份验证保护",authDisabledDescription:"启用以要求登录并管理用户访问",authDisabledMessage:"启用身份验证以创建用户账户、管理权限并保护您的 Bambuddy 实例。",enableAuthentication:"启用身份验证",currentUser:"当前用户",changePassword:"修改密码",admin:"管理员",users:"用户",addUser:"添加用户",groups:"组",addGroup:"添加组",system:"系统",noDescription:"无描述",userCount:"{{count}} 个用户",permissionCount:"{{count}} 个权限",createUser:"创建用户",username:"用户名",enterUsername:"输入用户名",password:"密码",enterPassword:"输入密码",passwordRequirements:"至少 8 个字符，包含一个大写、一个小写、一个数字和一个特殊字符。",confirmPassword:"确认密码",confirmPasswordPlaceholder:"确认密码",viewReleaseOnGitHub:"在 GitHub 上查看发布",turnAllPlugsOn:"开启所有插座",turnAllPlugsOff:"关闭所有插座",clearNotificationLogs:"清除通知日志",clearLogsMessage:"这将永久删除所有 30 天前的通知日志。此操作无法撤销。",clearLogs:"清除日志",resetUiPreferences:"重置 UI 偏好",resetUiPreferencesMessage:"这将重置所有 UI 偏好为默认值：侧边栏顺序、主题、仪表板布局、视图模式和排序偏好。您的打印机、归档和服务器设置不会受到影响。清除后页面将重新加载。",resetPreferences:"重置偏好",deleteGroupTitle:"删除组",deleteGroupMessage:"确定要删除此组吗？此组中的用户将失去这些权限。",deleteGroup:"删除组",disableAuthenticationTitle:"禁用身份验证",disableAuthenticationMessage:"确定要禁用身份验证吗？这将使您的 Bambuddy 实例无需登录即可访问。所有用户将保留在数据库中但身份验证将被禁用。",disableAuthentication:"禁用身份验证",configureBambuddy:"配置 Bambuddy",systemDefault:"系统默认",archiveSettings:"归档设置",newWindow:"新窗口",embeddedOverlay:"嵌入式叠加层",preferredSlicer:"首选切片软件",preferredSlicerDescription:"选择要用于打开文件的切片软件",orcaslicerKnownIssuesWarning:"OrcaSlicer 2.3.2 / 2.4.0-dev 存在已知 CLI 错误，无法切片许多 Bambu 创建的 3MF — 见上游 issue #12426（绘制的多挤出机文件 segfault）和 #13386（参数范围严格验证拒绝）。在上游修复发布之前，推荐使用 Bambu Studio。",useSlicerApi:"使用切片器 API",useSlicerApiDescription:"开启时，「切片」操作打开应用内切片器模态并调用 slicer-API sidecar。关闭时（默认），通过 URI 方案交给桌面切片器。",slicerCard:"切片器",orcaslicerApiUrl:"OrcaSlicer sidecar URL",bambuStudioApiUrl:"Bambu Studio sidecar URL",slicerApiUrlDescription:"slicer-API sidecar 容器的 URL。留空以使用 SLICER_API_URL / BAMBU_STUDIO_API_URL 环境变量默认值。",slicerBundles:{title:"切片器捆绑包",description:'导入从 BambuStudio 导出的 Printer Preset Bundle (.bbscfg)（文件 → 导出 → 导出预设捆绑包 → "Printer preset bundle"）。导入后，切片请求可以按名称从捆绑包中选择预设，无需重新上传 JSON 配置三元组。',uploadButton:"上传捆绑包",uploading:"上传中…",loading:"加载捆绑包中…",empty:"尚未导入捆绑包。",summary:"{{processCount}} 个工艺 · {{filamentCount}} 个耗材预设",delete:"删除",uploadSuccess:"已导入 {{name}}",uploadError:"上传捆绑包失败：{{message}}",deleteSuccess:"捆绑包已移除",deleteError:"删除捆绑包失败：{{message}}",confirmDeleteTitle:"移除此捆绑包？",confirmDeleteMessage:"引用「{{name}}」的切片请求将失败，直到捆绑包重新导入。"},externalCameras:"外部摄像头",costTracking:"成本追踪",printsOnly:"仅打印",totalConsumption:"总消耗",dataManagement:"数据管理",storageUsage:"存储使用情况",storageUsageDescription:"按类别的数据使用情况明细",storageUsageTotal:"总计",storageUsageErrors:"错误",storageUsageOtherBreakdown:"其他（包括静态资源、脚本和配置文件）",storageUsageSystem:"系统",storageUsageData:"数据",storageUsageUnavailable:"存储使用信息不可用",clearNotificationLogsDescription:"删除 30 天前的通知日志",resetUiPreferencesDescription:"重置侧边栏顺序、主题、视图模式和布局偏好。打印机、归档和设置不受影响。",enableHomeAssistant:"启用 Home Assistant",enableMqtt:"启用 MQTT",useTls:"使用 TLS",enableMetricsEndpoint:"启用指标端点",availableMetrics:"可用指标",editUser:"编辑用户",deleteUserTitle:"删除用户",groupName:"组名称",leaveEmptyForAnonymous:"留空为匿名",leaveEmptyForNoAuth:"留空为无认证",enterNewPassword:"输入新密码",confirmNewPassword:"确认新密码",enterGroupName:"输入组名称",enterDescriptionOptional:"输入描述（可选）",enterCurrentPassword:"输入当前密码",enterNewPasswordMin6:"输入新密码（至少 6 个字符）",toast:{keyCopied:"密钥已复制到剪贴板",copyFailed:"复制密钥失败",keyAddedToBrowser:"密钥已添加到 API 浏览器",clearLogsFailed:"清除日志失败",uiPreferencesReset:"UI 偏好已重置。刷新中...",authDisabled:"身份验证已成功禁用",authDisableFailed:"禁用身份验证失败",apiKeyCreated:"API 密钥已创建",apiKeyDeleted:"API 密钥已删除",userCreated:"用户创建成功",userUpdated:"用户更新成功",userDeleted:"用户删除成功",groupCreated:"组创建成功",groupUpdated:"组更新成功",groupDeleted:"组删除成功",fillRequiredFields:"请填写所有必填字段",passwordsDoNotMatch:"密码不匹配",passwordTooShort:"密码至少需要 8 个字符",passwordNeedsUppercase:"密码必须至少包含一个大写字母",passwordNeedsLowercase:"密码必须至少包含一个小写字母",passwordNeedsDigit:"密码必须至少包含一个数字",passwordNeedsSpecial:"密码必须至少包含一个特殊字符",enterGroupName:"请输入组名称",settingsSaved:"设置已保存",noPermissionUpdate:"您没有权限更改设置",cameraSettingsSaved:"摄像头设置已保存",enterCameraUrl:"请输入摄像头 URL",passwordChanged:"密码修改成功",connectionFailed:"连接失败",testFailed:"测试失败",cameraConnected:"摄像头已连接{{resolution}}"},testConnection:"测试连接",catalog:{spoolCatalog:"耗材目录",spoolCatalogDescription:"按品牌/类型的空耗材重量。用于添加耗材时的自动重量查找。",searchCatalog:"搜索目录...",addNewEntry:"添加新条目",namePlaceholder:"名称（例如：Bambu Lab - 塑料）",weight:"重量",type:"类型",default:"默认",custom:"自定义",noMatch:"没有条目匹配您的搜索",empty:"目录中没有条目",deleteEntry:"删除条目",deleteConfirm:'确定要删除"{{name}}"吗？',resetCatalog:"重置目录",resetConfirm:"重置目录为默认值？这将移除所有自定义条目。",loadFailed:"加载耗材目录失败",nameWeightRequired:"名称和重量为必填项",entryAdded:"条目已添加",addFailed:"添加条目失败",entryUpdated:"条目已更新",updateFailed:"更新条目失败",entryDeleted:"条目已删除",deleteFailed:"删除条目失败",resetSuccess:"目录已重置为默认值",resetFailed:"重置目录失败",exported:"已导出 {{count}} 条",imported:"已导入 {{added}} 条（跳过 {{skipped}} 条）",importFailed:"导入失败：无效的 JSON 格式",exportTooltip:"导出目录为 JSON",importTooltip:"从 JSON 导入目录",resetTooltip:"重置为默认值",selectedCount:"已选择 {{count}} 项",deleteSelected:"删除所选",bulkDeleteConfirm:"确定要删除 {{count}} 个条目吗？",bulkDeleted:"已删除 {{count}} 个条目",bulkDeleteFailed:"删除条目失败",material:"材料",spoolWeight:"线轴重量",color:"颜色",updateSpoolWeight:"更新线轴重量",filamentUpdated:"耗材已更新",filamentUpdateFailed:"更新耗材失败",filamentUpdateInvalid:"耗材数据无效",keepExistingSpoolWeight:"保留现有线轴的旧重量",keepExistingSpoolWeightDesc:"已使用此耗材类型创建的线轴保留旧的皮重。新线轴使用更新后的值。",applyToAllSpools:"应用到所有线轴",applyToAllSpoolsDesc:"此耗材类型的所有重量计算立即使用新的皮重。"},colorCatalog:{title:"颜色目录",description:"按制造商/材料的耗材颜色。用于添加耗材时的自动颜色查找。",searchColors:"搜索颜色...",allManufacturers:"所有制造商",addNewColor:"添加新颜色",manufacturer:"制造商",colorName:"颜色名称",hex:"十六进制",materialOptional:"材料（可选）",showing:"显示 {{filtered}} / {{total}} 种颜色",noMatch:"没有颜色匹配您的搜索",empty:"目录中没有颜色",deleteColor:"删除颜色",deleteConfirm:'确定要删除"{{name}}"吗？',resetCatalog:"重置颜色目录",resetConfirm:"重置目录为默认值？这将移除所有自定义颜色。",sync:"同步",starting:"启动中...",syncTooltip:"从 FilamentColors.xyz 同步（2000+ 种颜色，可能需要一分钟）",loadFailed:"加载颜色目录失败",fieldsRequired:"制造商、颜色名称和十六进制颜色为必填项",colorAdded:"颜色已添加",addFailed:"添加颜色失败",colorUpdated:"颜色已更新",updateFailed:"更新颜色失败",colorDeleted:"颜色已删除",deleteFailed:"删除颜色失败",resetSuccess:"颜色目录已重置为默认值",resetFailed:"重置目录失败",syncUpToDate:"已是最新（检查了 {{count}} 种颜色）",syncComplete:"添加了 {{added}} 种新颜色（{{skipped}} 种已存在）",syncError:"同步错误",syncFailed:"从 FilamentColors.xyz 同步失败",exported:"已导出 {{count}} 种颜色",imported:"已导入 {{added}} 种颜色（跳过 {{skipped}} 种）",importFailed:"导入失败：无效的 JSON 格式",selectedCount:"已选择 {{count}} 项",deleteSelected:"删除所选",bulkDeleteConfirm:"确定要删除 {{count}} 种颜色吗？",bulkDeleted:"已删除 {{count}} 种颜色",bulkDeleteFailed:"删除颜色失败"},dateFormat:"日期格式",dateFormatUs:"美式 (MM/DD/YYYY)",dateFormatEu:"欧式 (DD/MM/YYYY)",dateFormatIso:"ISO (YYYY-MM-DD)",timeFormat:"时间格式",timeFormat12:"12小时制 (3:30 PM)",timeFormat24:"24小时制 (15:30)",defaultPrinter:"默认打印机",defaultPrinterDescription:"为上传、重印和其他操作预选此打印机。",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"拖拽侧边栏项目以重新排序。在此处重置为默认顺序。",setDefault:"设为默认",sidebarOrderSetDefaultHint:"设为默认将当前菜单顺序应用于尚未自定义的用户。",sidebarDefaultSet:"已设置默认菜单顺序。",sidebarDefaultCleared:"已清除默认菜单顺序。",sidebarDefaultFailed:"设置默认菜单顺序失败。",reset:"重置",darkMode:"深色模式",lightMode:"浅色模式",active:"(当前)",background:"背景",accent:"强调色",style:"样式",bgNeutral:"中性",bgWarm:"暖色",bgCool:"冷色",bgOled:"OLED 纯黑",bgSlate:"石板蓝",bgForest:"森林绿",accentGreen:"绿色",accentTeal:"青色",accentBlue:"蓝色",accentOrange:"橙色",accentPurple:"紫色",accentRed:"红色",styleClassic:"经典",styleGlow:"发光",styleVibrant:"鲜艳",themeToggleHint:"使用侧边栏中的图标在深色、浅色和系统模式之间切换。",autoArchivePrints:"自动归档打印",autoArchiveDescription:"打印完成时自动保存3MF文件",saveThumbnailsDescription:"从3MF文件中提取并保存预览图像",captureFinishPhotoDescription:"打印完成时从打印机摄像头拍照",ffmpegNotInstalled:"未安装ffmpeg",ffmpegRequired:"摄像头捕获需要ffmpeg。通过 <brew>brew install ffmpeg</brew>（macOS）或 <apt>apt install ffmpeg</apt>（Linux）安装。",camera:"摄像头",cameraViewMode:"摄像头查看模式",cameraOverlayDescription:"摄像头在主屏幕上以可调大小的覆盖层打开",cameraWindowDescription:"摄像头在单独的浏览器窗口中打开",externalCamerasDescription:"配置外部摄像头以替换内置打印机摄像头。支持MJPEG流、RTSP、HTTP快照和USB摄像头（V4L2）。启用后，外部摄像头将用于实时查看和完成照片。",cameraPlaceholderUsb:"设备路径 (/dev/video0)",cameraPlaceholderUrl:"摄像头URL (rtsp://... 或 http://...)",cameraTypeMjpeg:"MJPEG 流",cameraTypeRtsp:"RTSP 流",cameraTypeSnapshot:"HTTP 快照",cameraTypeUsb:"USB 摄像头 (V4L2)",cameraSnapshotUrl:"快照 URL（可选）",cameraSnapshotUrlPlaceholder:"http://192.168.1.61:1984/api/frame.jpeg?src=printer",cameraSnapshotUrlHelp:"用于通知缩略图、完成照片、层延时摄影帧和打印板检测的单帧 URL。延时摄影和打印板检测各自需要自己的每打印机开关 — 此 URL 只是它们激活时拉取的图像源。留空以从上方实时流捕获。适用于 go2rtc（/api/frame.jpeg）和具有专用快照端点的 IP 摄像头。",cameraRotation:"旋转",test:"测试",connected:"已连接",disconnected:"未连接",currency:"货币",defaultFilamentCost:"默认耗材成本（每公斤）",electricityCost:"每千瓦时电费",energyDisplayMode:"能源显示模式",energyModePrintDescription:"仪表板显示打印期间使用的能源总和",energyModeTotalDescription:"仪表板显示智能插座的累计能源",fileManager:"文件管理器",createArchiveEntry:"打印时创建归档条目",createArchiveEntryDescription:"从文件管理器打印时，可选择创建归档条目",lowDiskSpaceWarning:"磁盘空间不足警告",lowDiskSpaceDescription:"当可用磁盘空间低于此阈值时显示警告",printerFirmware:"打印机固件",checkFirmwareDescription:"检查Bambu Lab的打印机固件更新",bambuddySoftware:"Bambuddy 软件",autoCheckDescription:"启动时自动检查新版本",checkNow:"立即检查",updateAvailableVersion:"可用更新：v{{version}}",releaseNotes:"发布说明",updateViaDocker:"通过 Docker Compose 更新：",updateViaHomeAssistant:"更新由 Home Assistant Supervisor 管理。请在 Home Assistant 中打开 设置 → 加载项 → Bambuddy 以安装新版本。",installUpdate:"安装更新",latestVersionRunning:"您正在运行最新版本",failedToCheckUpdates:"检查更新失败：{{error}}",backupRestore:"备份与恢复",backupRestoreDescription:"导出/导入设置并配置GitHub备份",goToBackup:"前往备份",externalUrl:"外部URL",externalUrlDescription:"Bambuddy可访问的外部URL。用于通知图像和外部集成。",bambuddyUrl:"Bambuddy URL",externalUrlHint:"包含协议和端口（例如：http://192.168.1.100:8000）",ftpRetry:"FTP重试",ftpRetryDescription:"当打印机WiFi不稳定时重试FTP操作。适用于3MF下载、打印上传、延时摄影下载和固件更新。",autoRetryDescription:"自动重试失败的FTP操作",retryAttempts:"重试次数",retryDelay:"重试延迟",connectionTimeout:"连接超时",time_one:"{{count}}次",time_other:"{{count}}次",second_one:"{{count}}秒",second_other:"{{count}}秒",nSeconds:"{{count}}秒",increaseForWeakWifi:"对WiFi信号弱的打印机增加此值",homeAssistant:"Home Assistant",homeAssistantFullDescription:"连接到Home Assistant，通过HA REST API控制智能插座。支持switch、light、input_boolean和script实体。",homeAssistantUrl:"Home Assistant URL",longLivedAccessToken:"长期访问令牌",haTokenHint:"在HA中创建令牌：个人资料 → 长期访问令牌 → 创建令牌",connectionSuccessful:"连接成功",connectionFailed:"连接失败",haConnectionSuccess:"已成功连接到Home Assistant。",haConnectionFailed:"连接Home Assistant失败。",mqttPublishing:"MQTT发布",mqttDescription:"将BamBuddy事件发布到外部MQTT代理，用于与Node-RED、Home Assistant和其他自动化系统集成。",mqttEnableDescription:"向外部MQTT代理发布事件",brokerHostname:"代理主机名",port:"端口",usernameOptional:"用户名（可选）",passwordOptional:"密码（可选）",topicPrefix:"主题前缀",topicPrefixHint:"主题格式：{{prefix}}/printers/<serial>/status 等",prometheusMetrics:"Prometheus 指标",prometheusEndpointDescription:"在 <code>/api/v1/metrics</code> 公开打印机指标，用于Prometheus/Grafana监控。",bearerTokenOptional:"Bearer令牌（可选）",bearerTokenHint:"设置后，请求必须包含 <code>Authorization: Bearer <token></code>",metricsConnectionStatus:"连接状态",metricsPrinterState:"打印机状态（空闲/打印中等）",metricsPrintProgress:"打印进度 0-100%",metricsBedTemp:"热床温度",metricsNozzleTemp:"喷嘴温度",metricsPrintsTotal:"按结果分类的总打印数",metricsMore:"...以及更多（层数、风扇、队列、耗材用量）",smartPlugsDescription:"连接智能插座（Tasmota或Home Assistant）以自动化电源控制并跟踪打印机的能源使用情况。",allOn:"全部开启",allOff:"全部关闭",addSmartPlug:"添加智能插座",energySummary:"能源概要",currentPower:"当前功率",plugsOnline:"{{reachable}}/{{total}} 个插座在线",today:"今天",yesterday:"昨天",total:"总计",enablePlugsForSummary:"启用插座以查看能源概要",addNotificationProvider:"添加",systemBadge:"(系统)",creating:"创建中...",changing:"修改中...",deleteUserAndItems:"删除用户及其所有项目",deleteUserKeepItems:"删除用户，保留项目（将变为无主项目）",ok:"确定",twoFa:{totpTitle:"身份验证器应用 (TOTP)",totpDesc:"使用 Google Authenticator、Aegis 或 Authy 等应用。",emailOtpTitle:"邮件 OTP",emailOtpDesc:"登录时向 {{email}} 发送一次性验证码。",emailOtpNoEmail:"请先为账户添加邮箱地址以启用此方式。",addEmailFirst:"您的账户没有邮箱地址，请联系管理员添加。",setupTotp:"设置身份验证器应用",setupAuthApp:"设置身份验证器应用",setupInstructions:"使用身份验证器应用扫描二维码，然后输入验证码确认。",manualEntry:"无法扫描？请手动输入此密钥：",scannedContinue:"已扫描 — 继续",enterCodeToConfirm:"请输入身份验证器应用中的6位验证码以确认设置。",activate:"激活",disableTotp:"停用身份验证器",disableConfirmHint:"请输入有效的 TOTP 码或备用码来停用身份验证器。",totpDisabled:"身份验证器应用已停用。",emailOtpEnabled:"邮件 OTP 已启用。",emailOtpDisabled:"邮件 OTP 已停用。",smtpRequired:"请先配置并测试SMTP设置。",invalidCode:"无效验证码，请重试。",enableEmailOtp:"启用邮件 OTP",disableEmailOtp:"停用邮件 OTP",emailSetupEnterCode:"验证码已发送至您的邮箱地址。请在下方输入以确认您拥有此邮箱。",verifyAndEnable:"验证并启用",emailDisablePasswordHint:"请输入您的账户密码以确认停用邮件 OTP。",passwordPlaceholder:"输入您的密码",backupCodesTitle:"保存备用码",backupCodesWarning:"请将这些码保存在安全的地方。每个码只能使用一次，且不会再次显示。",backupCodesRemaining:"剩余 {{count}} 个备用码",savedCodes:"已保存",regenBackup:"重新生成备用码",regenBackupHint:"输入当前 TOTP 码以生成 10 个新备用码，所有现有备用码将失效。",newBackupCodes:"新备用码",linkedAccounts:"已关联的 SSO 账户",linkedAccountsDesc:"以下外部身份提供商已与您的账户关联。",oidcUnlinked:"账户已解除关联。"},oidc:{title:"SSO / OIDC 提供商",desc:"配置 OpenID Connect 提供商以实现单点登录。",addProvider:"添加提供商",newProvider:"新提供商",empty:"尚未配置 OIDC 提供商。",created:"提供商已创建。",updated:"提供商已更新。",deleted:"提供商已删除。",refreshIcon:"刷新图标",removeIcon:"移除图标",iconRefreshed:"图标已刷新。",iconRemoved:"图标已移除。",iconFetchFailed:"无法从提供商 URL 获取图标。",deleteTitle:"删除提供商",deleteMessage:'删除"{{name}}"？所有关联账户将断开连接。',form:{name:"显示名称",issuerUrl:"颁发者 URL",clientId:"客户端 ID",clientSecret:"客户端密钥",scopes:"作用域",iconUrl:"图标 URL（可选）",enabled:"已启用",autoCreate:"自动创建用户",autoCreateDesc:"首次登录时自动创建本地账户。",autoLink:"自动关联已有账户",autoLinkDesc:"首次登录时通过邮箱匹配现有本地账户并自动关联。",secretHint:"留空以保留当前",secretPlaceholder:"新密钥",emailClaim:"邮箱声明",emailClaimDesc:"用作邮箱身份的 JWT 声明。Azure Entra ID 请使用 'preferred_username' 或 'upn'（不发送 email_verified）。仅使用可信的声明名称。",emailClaimPlaceholder:"邮箱",emailClaimCustomClaimAutoLinkWarning:"自定义声明仅在值由租户管理时（例如 Azure Entra ID 的 upn / preferred_username）对自动关联安全。如果您的 IdP 允许用户自我声明此声明，请勿启用自动关联。",requireEmailVerified:"要求邮箱已验证",requireEmailVerifiedDesc:"仅在提供商将邮箱声明标记为已验证时才接受。",requireEmailVerifiedWarning:"警告：将在未经验证的情况下接受邮箱。仅对受信任的提供商使用。",requireEmailVerifiedAutoLink:"请先禁用自动关联以更改此设置。",defaultGroup:"默认组",defaultGroupDesc:"自动创建用户时分配的组。未设置时回退到 Viewers。",defaultGroupViewersFallback:"Viewers（默认）"}},encryption:{title:"MFA 加密状态",enabledFromEnv:"已启用静态加密（密钥来自 MFA_ENCRYPTION_KEY 环境变量）",enabledFromFile:"已启用静态加密（密钥从数据目录加载）",enabledGenerated:"使用自动生成的密钥启用静态加密",notConfigured:"未配置静态加密",notConfiguredDesc:"TOTP 密钥和 OIDC client_secrets 以明文存储。请设置 MFA_ENCRYPTION_KEY 或使用可写数据目录重启 Bambuddy 以自动生成。",allEncrypted:"所有 MFA 密钥均已静态加密。",legacyRowsLabel:"旧版明文行",encryptedRowsLabel:"已加密行",legacyRowsWarning:"检测到 {{count}} 个旧版明文行。请重新保存 OIDC 提供商或重新注册用户的身份验证器应用，以迁移到加密存储。",backupHint:"自动生成的密钥存储在 DATA_DIR/.mfa_encryption_key 中，并包含在本地备份 ZIP 中。请保护备份安全或显式设置 MFA_ENCRYPTION_KEY。",decryptionBrokenTitle:"加密密钥缺失",decryptionBrokenError:"无法解密 {{count}} 条加密记录，因为加密密钥不再可用。请恢复以前的 MFA_ENCRYPTION_KEY 或 DATA_DIR/.mfa_encryption_key 以恢复访问。",migrationErrorWarning:"{{count}} 行旧数据在启动时未能重新加密。请检查服务器日志并重启 Bambuddy 以重试。"}},notification:{printStarted:{title:"打印已开始",body:"{{printer}}：{{filename}} 已开始打印"},printCompleted:{title:"打印已完成",body:"{{printer}}：{{filename}} 已成功完成"},printFailed:{title:"打印失败",body:"{{printer}}：{{filename}} 打印失败"},printStopped:{title:"打印已停止",body:"{{printer}}：{{filename}} 已停止"},printProgress:{title:"打印进度",body:"{{printer}}：{{filename}} 已完成 {{percent}}%"},printerOffline:{title:"打印机离线",body:"{{printer}} 已离线"},printerError:{title:"打印机错误",body:"{{printer}}：{{error}}"},filamentLow:{title:"耗材不足",body:"{{printer}}：耗材即将用完"},maintenanceDue:{title:"维护到期",body:"{{printer}}：{{items}} 需要关注"}},errors:{generic:"出了点问题",networkError:"网络错误。请检查您的连接。",notFound:"未找到",unauthorized:"未授权",serverError:"服务器错误",validationError:"请检查您的输入",printerConnectionFailed:"连接打印机失败",saveFailed:"保存更改失败",deleteFailed:"删除失败",loadFailed:"加载数据失败"},hmsErrors:{title:"错误 - {{name}}",noErrors:"无错误",viewOnWiki:"在拓竹 Wiki 上查看",clearInstructions:"在打印机上清除错误以在此处消除它们。",clearErrors:"清除错误",clearSuccess:"HMS 错误已清除",clearFailed:"清除 HMS 错误失败"},mqttDebug:{title:"MQTT 调试日志",searchPlaceholder:"搜索主题或负载...",noMessages:"尚未记录消息",startLoggingHint:'点击"开始记录"以开始捕获 MQTT 消息',noMessagesMatch:"没有消息匹配您的筛选条件",adjustFilterHint:"尝试调整您的搜索或筛选条件",incoming:"传入",outgoing:"传出",loggingStopped:"记录已停止",loggingActive:"记录中 - 消息将自动刷新",startLogging:"开始记录",stopLogging:"停止记录",clearLog:"清除日志",topic:"主题",timestamp:"时间戳",direction:"方向",all:"全部"},printerFiles:{title:"文件管理器",storageUsed:"已用：",storageFree:"剩余：",filterPlaceholder:"筛选文件...",deleteButton:"删除",deleteFiles:"删除 {{count}} 个文件",deleteFileConfirm:'删除"{{name}}"？此操作无法撤销。',deleteFilesConfirm:"删除 {{count}} 个选中的文件？此操作无法撤销。",noFiles:"打印机上没有文件",loadingFiles:"加载文件中...",failedToLoad:"加载文件失败",toast:{filesDeleted:"已删除 {{count}} 个文件",deleteFailed:"删除失败：{{error}}"}},confirm:{delete:"确定要删除吗？",unsavedChanges:"您有未保存的更改。确定要离开吗？",clearQueue:"确定要清空队列吗？"},login:{title:"Bambuddy 登录",subtitle:"登录您的账户",username:"用户名",usernamePlaceholder:"输入您的用户名",usernameOrEmail:"用户名或邮箱",usernameOrEmailPlaceholder:"用户名或 @ 邮箱",password:"密码",passwordPlaceholder:"输入您的密码",signIn:"登录",signingIn:"登录中...",rememberMe:"记住我",forgotPassword:"忘记密码？",loginSuccess:"登录成功",loginFailed:"登录失败",enterCredentials:"请输入用户名和密码",enterEmail:"请输入您的电子邮件地址",oidcLoginFailed:"OIDC 登录失败",oidcErrors:{providerError:"身份提供商返回了一个错误",missingParameters:"OIDC 回调缺少必要参数",invalidState:"OIDC 状态无效或已被使用",stateExpired:"OIDC 登录会话已过期，请重试",providerNotFound:"未找到 OIDC 提供商",discoveryFailed:"无法获取 OIDC 发现文档",invalidDiscovery:"OIDC 发现文档无效",networkError:"OIDC 令牌交换时出现网络错误",badResponse:"OIDC 令牌交换时收到意外响应",noIdToken:"OIDC 提供商未返回 ID 令牌",validationFailed:"OIDC 令牌验证失败",nonceMismatch:"OIDC nonce 不匹配，可能存在重放攻击",missingSubClaim:"OIDC 令牌缺少 sub 声明",noLinkedAccount:"没有与此 OIDC 身份关联的本地帐户",accountInactive:"您的帐户已被停用",userResolutionFailed:"无法解析您的帐户",internalError:"OIDC 登录过程中发生内部错误",tokenExchangeFailed:"OIDC 令牌交换失败"},forgotPasswordTitle:"忘记密码",forgotPasswordMessage:"如果您忘记了密码，请联系系统管理员进行重置。",forgotPasswordEmailMessage:"输入您的邮箱地址，我们将向您发送新密码。",emailAddress:"邮箱地址",emailPlaceholder:"your.email@example.com",cancel:"取消",sending:"发送中...",sendResetEmail:"发送重置邮件",howToReset:"如何重置密码：",resetStep1:"联系您的 Bambuddy 管理员",resetStep2:"请他们在用户管理中重置您的密码",resetStep3:"他们可以为您设置一个临时密码",resetStep4:"使用新密码登录并在设置中修改密码",gotIt:"知道了",resetPassword:{title:"设置新密码",subtitle:"请在下方输入并确认您的新密码。",newPassword:"新密码",newPasswordPlaceholder:"至少 8 个字符",confirmPassword:"确认密码",confirmPasswordPlaceholder:"重复输入新密码",saving:"保存中…",submit:"设置新密码",backToLogin:"返回登录",passwordsDoNotMatch:"密码不匹配",passwordTooShort:"密码至少需要 8 个字符",resetFailed:"密码重置失败。链接可能已过期。"},twoFA:{title:"两步验证",subtitle:"您的账户已启用两步验证。请在下方输入验证码。",methodAuthenticator:"身份验证器应用",methodEmail:"邮箱验证码",methodBackup:"备用恢复码",instructionsTotp:"请打开您的身份验证器应用，输入 Bambuddy 的 6 位验证码。",instructionsEmail:"6 位验证码已发送至您的邮箱，有效期为 10 分钟。",instructionsEmailNotSent:"点击下方按钮，通过邮件获取验证码。",instructionsBackup:"请输入您的一个 8 位备用恢复码。每个恢复码只能使用一次。",sendCodeButton:"发送邮箱验证码",sendingCode:"发送中...",resendCode:"重新发送验证码",codeLabel:"验证码",backupCodeLabel:"备用恢复码",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"验证",verifyingButton:"验证中...",backToLogin:"← 返回登录页面",orContinueWith:"或通过以下方式登录",signInWith:"使用 {{provider}} 登录",enterCode:"请输入验证码",sendCodeFailed:"验证码发送失败",invalidCode:"无效验证码，请重试。"}},setup:{title:"Bambuddy 设置",subtitle:"为您的 Bambuddy 实例配置身份验证",enableAuth:"启用身份验证",adminAccount:"管理员账户",adminAccountDesc:"如果管理员用户已存在，将使用现有管理员账户启用身份验证。如需使用现有管理员，请将下方字段留空，或输入新凭据创建新管理员用户。",adminUsername:"管理员用户名",adminPassword:"管理员密码",optionalIfAdminExists:"（如管理员用户已存在则为可选）",adminUsernamePlaceholder:"输入管理员用户名（可选）",adminPasswordPlaceholder:"输入管理员密码（可选）",confirmPassword:"确认密码",confirmPasswordPlaceholder:"确认管理员密码",settingUp:"设置中...",completeSetup:"完成设置",toast:{authEnabledAdminCreated:"身份验证已启用并创建了管理员用户",authEnabledExistingAdmins:"使用现有管理员用户启用了身份验证",setupCompleted:"设置完成",enterBothCredentials:"请输入管理员用户名和密码，或将两者留空以使用现有管理员用户",passwordsDoNotMatch:"密码不匹配",passwordTooShort:"密码至少需要 6 个字符"}},changePassword:{title:"修改密码",currentPassword:"当前密码",currentPasswordPlaceholder:"输入当前密码",newPassword:"新密码",newPasswordPlaceholder:"输入新密码（至少 6 个字符）",confirmPassword:"确认新密码",confirmPasswordPlaceholder:"确认新密码",passwordsDoNotMatch:"密码不匹配",passwordTooShort:"密码至少需要 6 个字符",changing:"修改中...",success:"密码修改成功",failed:"密码修改失败"},plateAlert:{title:"打印已暂停！",message:"在构建板上检测到物体。打印已自动暂停。请清理打印板并继续打印。",understand:"我知道了"},camera:{title:"摄像头视图",invalidPrinterId:"无效的打印机 ID",live:"实时",snapshot:"快照",restartStream:"重启流",refreshSnapshot:"刷新快照",fullscreen:"全屏",exitFullscreen:"退出全屏",connectingToCamera:"连接摄像头中...",capturingSnapshot:"拍摄快照中...",connectionLost:"连接已断开",connectionFailed:"摄像头连接失败",reconnecting:"{{countdown}} 秒后重新连接...（第 {{attempt}}/{{max}} 次尝试）",reconnectNow:"立即重新连接",cameraUnavailable:"摄像头不可用",cameraUnavailableDesc:"请确保打印机已通电并已连接。",noCamera:"无可用摄像头",retry:"重试",cameraStream:"摄像头流",zoomOut:"缩小",zoomIn:"放大",resetZoom:"重置缩放",recording:"录制中",startRecording:"开始录制",stopRecording:"停止录制",chamberLight:"切换腔室灯",unavailable:"摄像头不可用",diagnose:{button:"诊断",modalTitle:"摄像头诊断",running:"正在运行诊断...",runFailed:"无法运行诊断: {{error}}",retry:"重新运行",stage:{tcp_reachable:"网络可达性",first_frame:"画面捕获",live_stream_active:"直播流正在进行"},summary:{all_ok:"摄像头工作正常。诊断已成功完成所有阶段。",live_stream_active_healthy:"摄像头正在传输最新画面 — 无需测试。",printer_unreachable:"无法访问打印机。请检查 IP 地址、网络连接以及打印机是否已开机。",camera_port_closed:"打印机可访问，但摄像头端口已关闭。请确保打印机设置中已启用仅 LAN 模式和开发者模式。",no_frame:"已连接到摄像头，但未收到画面。请重试或检查打印机设置中摄像头是否已启用。",unknown_failure:"摄像头诊断因未知原因失败。请查看支持日志了解详情。"},meta:{protocol:"协议",port:"端口",profile:"配置"}}},groups:{title:"组管理",subtitle:"管理访问控制的权限组",backToSettings:"返回设置",createGroup:"创建组",noPermission:"您没有访问此页面的权限。",system:"系统",noDescription:"无描述",usersCount:"{{count}} 个用户",permissionsCount:"{{count}} 个权限",edit:"编辑",delete:"删除",toast:{created:"组创建成功",updated:"组更新成功",deleted:"组删除成功",enterGroupName:"请输入组名称"},modal:{editGroup:"编辑组",createGroup:"创建组",cancel:"取消",saving:"保存中...",creating:"创建中...",saveChanges:"保存更改"},form:{groupName:"组名称",groupNamePlaceholder:"输入组名称",systemGroupWarning:"系统组名称不可更改",description:"描述",descriptionPlaceholder:"输入描述（可选）",permissions:"权限（已选 {{count}} 个）"},deleteModal:{title:"删除组",message:"确定要删除此组吗？此组中的用户将失去这些权限。",confirm:"删除组"},editor:{title:"编辑组",createTitle:"创建组",search:"搜索权限...",selectAll:"全选",clearAll:"清除全部",permissionsSelected:"已选 {{count}} 个",noResults:"没有权限匹配您的搜索"}},users:{title:"用户管理",subtitle:"管理用户及其对 Bambuddy 实例的访问",backToSettings:"返回设置",createUser:"创建用户",noPermission:"您没有访问此页面的权限。",admin:"管理员",noGroups:"无组",active:"活跃",inactive:"非活跃",edit:"编辑",delete:"删除",system:"系统",noGroupsAvailable:"无可用组",table:{username:"用户名",groups:"组",status:"状态",actions:"操作"},toast:{created:"用户创建成功",updated:"用户更新成功",deleted:"用户删除成功",fillRequired:"请填写所有必填字段",passwordsDoNotMatch:"密码不匹配",passwordTooShort:"密码至少需要 6 个字符",ldapProvisioned:"已创建 LDAP 用户「{{username}}」"},modal:{createUser:"创建用户",editUser:"编辑用户",cancel:"取消",creating:"创建中...",saving:"保存中...",saveChanges:"保存更改",advancedAuthSubtitle:"使用高级认证",tabsAriaLabel:"用户来源",localTab:"本地",ldapTab:"LDAP",ldapSearchLabel:"搜索目录",ldapSearchPlaceholder:"输入用户名、姓名或电子邮件...",ldapMinChars:"输入至少 2 个字符以搜索",ldapTypeToSearch:"开始输入以搜索 LDAP 目录",ldapSearching:"搜索目录中...",ldapNoResults:"目录中没有匹配的用户",ldapSearchError:"目录搜索失败。请检查 LDAP 服务器状态。",ldapAlreadyProvisioned:"已创建",ldapSelectedLabel:"已选",ldapProvision:"创建用户",ldapProvisioning:"创建中...",ldapErrorProvision:"创建失败。请检查 LDAP 服务器状态后重试。"},form:{username:"用户名",usernamePlaceholder:"输入用户名",email:"邮箱",emailPlaceholder:"user@example.com",password:"密码",passwordPlaceholder:"输入密码",confirmPassword:"确认密码",confirmPasswordPlaceholder:"确认密码",newPasswordPlaceholder:"输入新密码",confirmNewPasswordPlaceholder:"确认新密码",leaveBlankToKeep:"留空以保持当前值",groups:"组",optional:"可选",autoGeneratedPassword:"将自动生成安全密码并通过邮件发送给用户。",passwordManagedByAdvancedAuth:'密码由高级认证管理。使用"重置密码"通过邮件向用户发送新密码。',resetPassword:"重置密码",resettingPassword:"重置密码中..."},deleteModal:{title:"删除用户",message:"确定要删除此用户吗？此操作无法撤销。",confirm:"删除用户"}},streamOverlay:{title:"流叠加层",invalidPrinterId:"无效的打印机 ID",cameraStream:"摄像头流",progress:"进度",eta:"预计完成时间",printerIdle:"打印机空闲",printerOffline:"打印机离线",status:{printing:"打印中",paused:"已暂停",finished:"已完成",failed:"失败",idle:"空闲",unknown:"未知"}},profiles:{title:"配置文件",subtitle:"管理您的切片预设和压力推进校准",tabs:{bambuCloud:"Bambu Cloud",orcaCloud:"Orca Cloud",local:"本地配置文件",kprofiles:"K 值配置"},orcaCloud:{connectedAs:"已连接",logout:"断开连接",noLogoutPermission:"您没有断开连接的权限",noConnectPermission:"您没有连接到 Orca Cloud 的权限",retry:"重试",back:"使用其他登录方式",connect:{title:"连接到 Orca Cloud",description:"登录您的 Orca Cloud 账户,将切片机配置同步到 Bambuddy。"},providers:{google:"使用 Google 登录",apple:"使用 Apple 登录",github:"使用 GitHub 登录",email:"使用邮箱和密码登录"},password:{title:"使用邮箱和密码登录",email:"邮箱",emailPlaceholder:"you@example.com",password:"密码",submit:"登录"},paste:{title:"完成登录",step1:"已在新标签页中打开 Orca Cloud 登录页面。请使用您的 Orca 账户登录。",step2:'您的浏览器将被重定向到一个 "localhost" URL,该 URL 无法加载。这是正常的 — 我们需要的就是这个 URL。',step3:"从浏览器的地址栏复制整个 URL,粘贴到下方。",signInUrl:"如果登录标签页未打开,请点击此 URL:",label:"在此处粘贴回调 URL",placeholder:"http://localhost:41172/callback?code=...&state=...",submit:"完成连接"},profiles:{title:"您的 Orca Cloud 配置文件 ({{count}})",refresh:"刷新",empty:"您的 Orca Cloud 账户中尚无配置文件。"},toast:{connected:"已以 {{email}} 身份连接到 Orca Cloud",disconnected:"已从 Orca Cloud 断开连接"},errors:{startFailed:"无法启动 Orca Cloud 登录流程。",finishFailed:"无法完成 Orca Cloud 登录。",passwordFailed:"无法使用该邮箱和密码登录。",passwordEmpty:"请输入邮箱和密码。",emptyPaste:"请从浏览器粘贴回调 URL。",noCode:"该 URL 不像 Orca Cloud 回调 (缺少 code 参数)。请从地址栏复制完整 URL。"}},localProfiles:{title:"本地配置文件",subtitle:"从 OrcaSlicer 导入和管理切片预设",import:"导入配置文件",importDesc:"将 .bbscfg、.bbsflmt、.orca_filament、.zip 或 .json 文件拖放到此处",importing:"导入中...",search:"搜索本地预设...",noPresets:"暂无本地预设",noSearchResults:"没有与搜索匹配的预设",badge:"本地",edit:"编辑",delete:"删除",cancel:"取消",deleteConfirmTitle:"删除预设",deleteConfirm:"确定要删除此预设吗？此操作无法撤销。",source:"来源",inheritsFrom:"继承自",filamentType:"类型",vendor:"厂商",compatiblePrinters:"兼容打印机",nozzleTemp:"喷嘴温度",cost:"成本",density:"密度",pressureAdvance:"压力推进",filament:"耗材",process:"工艺",printer:"打印机",toast:{importSuccess:"已导入 {{count}} 个预设",importSkipped:"跳过 {{count}} 个预设（重复）",importError:"导入时出现 {{count}} 个错误",deleted:"预设已删除",updated:"预设已更新"}},connectedAs:"已连接为",logout:"退出登录",noLogoutPermission:"您没有退出登录的权限",failedToLoad:"加载配置文件失败",retry:"重试",time:{justNow:"刚刚",minsAgo:"{{count}} 分钟前",hoursAgo:"{{count}} 小时前",daysAgo:"{{count}} 天前"},toast:{loggedOut:"已退出登录"},login:{title:"连接到拓竹云",subtitle:"跨设备同步您的切片预设",email:"邮箱",password:"密码",region:"地区",regionGlobal:"全球",regionChina:"中国",verificationCode:"验证码",totpCode:"验证器代码",checkEmail:"检查您的邮箱 ({{email}}) 获取 6 位验证码",enterTotpHint:"输入验证器应用中的 6 位代码",accessToken:"访问令牌",accessTokenHint:"粘贴您的拓竹云访问令牌。中国大陆账号（绑定手机号、无邮箱登录）只能使用此方式登录。可从 MakerWorld 浏览器 Cookie 中获取令牌，详见 Wiki。",back:"返回",loginButton:"登录",verifyButton:"验证",setTokenButton:"设置令牌",useToken:"改用访问令牌",useEmail:"改用邮箱登录",toast:{loggedIn:"登录成功",codeSent:"验证码已发送到您的邮箱",enterTotp:"输入验证器应用中的代码",tokenSet:"令牌设置成功"}},presets:{myPreset:"我的预设（可编辑）",duplicate:"复制",editable:"可编辑",failedToLoadDetails:"加载预设详情失败",deleteConfirm:"删除此预设？",deleteWarning:'这将从拓竹云中永久删除"{{name}}"。此操作无法撤销。',noDuplicatePermission:"您没有复制预设的权限",noEditPermission:"您没有编辑预设的权限",noDeletePermission:"您没有删除预设的权限",types:{filament:"耗材预设",printer:"打印机预设",process:"工艺预设"},toast:{deleted:"预设已删除",created:"预设已创建",updated:"预设已更新",duplicated:"预设已复制",fieldAdded:'字段"{{key}}"已添加',exported:"预设已导出"},baseLabel:"基础：{{name}}",currentLabel:"当前：{{name}}",newPreset:"新建预设",editPreset:"编辑预设",duplicatePreset:"复制预设",createNewPreset:"创建新预设",customizeSettings:"自定义新预设的设置",compareWithBase:"与基础预设比较",compare:"比较",basePreset:"基础预设",selectBasePreset:"选择基础预设...",presetName:"预设名称",myCustomPreset:"我的自定义预设",inheritsFrom:"继承自",dropJsonToImport:"拖放 JSON 以导入",tabs:{common:"常用",allFields:"所有字段"},availableFields:"可用字段",searchFieldsPlaceholder:"搜索字段...",noMatchingFields:"没有匹配的字段",allFieldsAdded:"所有字段已添加",addCustomField:"添加自定义字段",yourOverrides:"您的覆盖值",noOverridesYet:"暂无覆盖值",clickFieldsToAdd:"点击左侧的字段进行添加",saveAsTemplate:"保存为模板",jsonTip:"提示：将 .json 文件拖放到此对话框的任意位置以导入设置"},cloudView:{searchPlaceholder:"搜索预设...",templates:"模板",refresh:"刷新",newPreset:"新建预设",clearFilters:"清除筛选",compareMode:"比较模式",selectAnotherPreset:"选择另一个 {{type}} 预设",clickTwoPresets:"点击两个相同类型的预设进行比较",selectFirst:"1. 选择第一个",selectSecond:"2. 选择第二个",compareNow:"立即比较",lastSynced:"上次同步：",showingCount:"显示 {{showing}} / {{total}} 个预设",noPresetsFound:"未找到预设",columns:{filament:"耗材",process:"工艺",printer:"打印机"},noFilamentPresets:"无耗材预设",noProcessPresets:"无工艺预设",noPrinterPresets:"无打印机预设",filters:{type:"类型",owner:"所有者",printer:"打印机",nozzle:"喷嘴",filament:"耗材",layer:"层",all:"全部",myPresets:"我的预设",builtIn:"内置",process:"工艺"},noTemplatesPermission:"您没有管理模板的权限",noRefreshPermission:"您没有刷新配置文件的权限",noCreatePermission:"您没有创建预设的权限"},templates:{title:"快速模板",noTemplates:"暂无模板",createFirst:"从预设编辑器创建模板",typeFilter:"类型：",deleteTitle:"删除模板",deleteWarning:"此操作无法撤销",deleteConfirm:'确定要删除"{{name}}"吗？',namePlaceholder:"模板名称",descriptionPlaceholder:"描述",settingsJson:"设置 (JSON)",fieldsCount:"{{count}} 个字段",shownInModals:"在对话框中显示",hiddenInModals:"在对话框中隐藏",apply:"应用",toast:{deleted:"模板已删除",updated:"模板已更新",created:"模板已创建",applied:"模板已应用"}}},support:{debugLoggingActive:"调试日志记录已激活",manageLogs:"管理",collectItem7:"打印机连接和固件版本",collectItem8:"集成状态（Spoolman、MQTT、HA）",collectItem9:"网络接口（仅子网）",collectItem10:"Python 包版本",collectItem11:"数据库健康检查",collectItem12:"Docker 环境详情",bundleGenerating:"正在生成包...",bundleStepConnection:"正在执行打印机连接性检查",bundleStepVirtualPrinters:"正在执行虚拟打印机设置检查",bundleStepLogScan:"正在扫描最近的日志以查找已知问题",bundleStepBuild:"正在构建支持包 ZIP 文件"},fileManager:{title:"文件管理器",subtitle:"组织和管理您的打印文件",uploadFiles:"上传文件",newFolder:"新建文件夹",folderName:"文件夹名称",folderNamePlaceholder:"例如：功能零件",renameFile:"重命名文件",renameFolder:"重命名文件夹",invalidFilenameChar:'打印文件名中不允许使用字符 "{{char}}"。打印机 SD 卡拒绝以下字符: < > : " / \\ | ? *',moveFiles:"移动 {{count}} 个文件",rootNoFolder:"根目录（无文件夹）",current:"当前",linkFolder:"链接文件夹",linkFolderDescription:'将"{{name}}"链接到项目或归档以便快速访问。',project:"项目",archive:"归档",noProjectsFound:"未找到项目",noArchivesFound:"未找到归档",unlink:"取消链接",link:"链接",dragDropFiles:"将文件拖放到此处",dropFilesHere:"将文件放在此处",orClickToBrowse:"或点击浏览",allFileTypesSupported:"支持所有文件类型。ZIP 文件将被解压。",zipFilesDetected:"检测到 ZIP 文件",zipExtractOptions:"ZIP 文件将被解压。选择如何处理文件夹结构：",preserveZipStructure:"保留 ZIP 中的文件夹结构",createFolderFromZip:"从 ZIP 文件名创建文件夹",stlThumbnailGeneration:"STL 缩略图生成",zipMayContainStl:"ZIP 文件可能包含 STL 文件。可以在解压时生成缩略图。",thumbnailsCanBeGenerated:"可以为 STL 文件生成缩略图。大型模型可能需要更长时间处理。",generateThumbnailsForStl:"为 STL 文件生成缩略图",threemfDetected:"检测到 3MF 文件",threemfExtractionInfo:"将自动从 3MF 文件中提取打印机型号、材料、颜色和打印设置。",willBeExtracted:"将被解压",filesExtracted:"已解压 {{count}} 个文件",uploadComplete:"上传完成：{{succeeded}} 个成功",uploadFailed:"上传失败",zipFilesFailed:"{{count}} 个文件失败",uploading:"上传中...",changeLink:"更改链接...",linkTo:"链接到...",linkToProjectOrArchive:"链接到项目或归档",addToQueue:"添加到队列",schedulePrint:"排程",generateThumbnail:"生成缩略图",generateThumbnails:"生成缩略图",generateThumbnailsForMissing:"为缺少缩略图的 STL 文件生成缩略图",gridView:"网格视图",listView:"列表视图",lowDiskSpaceWarning:"磁盘空间不足警告",lowDiskSpaceDetails:"仅剩 {{free}}（总共 {{total}}）。阈值设置为 {{threshold}} GB。",files:"文件",folders:"文件夹",size:"大小",free:"剩余",allFiles:"所有文件",allExternal:"外部",externalIsEmpty:"没有外部文件",externalEmptyDescription:"关联的外部文件夹中的文件将在此显示。",wrap:"换行",enableTextWrapping:"启用文本换行",disableTextWrapping:"禁用文本换行",collapse:"折叠",collapseFoldersByDefault:"默认折叠文件夹",expandFoldersByDefault:"默认展开文件夹",dragToResizeTooltip:"拖动调整大小，双击重置",searchFiles:"搜索文件...",allTypes:"所有类型",prints:"打印",ascending:"升序",descending:"降序",resultsCount:"{{showing}} / {{total}} 个文件",selectAll:"全选",deselectAll:"取消全选",selected:"已选择 {{count}} 个",adding:"添加中...",loadingFiles:"加载文件中...",folderIsEmpty:"文件夹为空",noFilesYet:"暂无文件",folderEmptyDescription:"上传文件或将文件移入此文件夹以开始使用。",noFilesDescription:"上传文件以开始组织您的打印相关文件。",noMatchingFiles:"没有匹配的文件",noMatchingFilesDescription:"没有文件匹配您当前的搜索或筛选条件。",clearFilters:"清除筛选",printedCount:"已打印 {{count}} 次",uploadedBy:"上传者",deleteFolder:"删除文件夹",deleteFile:"删除文件",deleteFilesCount:"删除 {{count}} 个文件",deleteFolderConfirm:"确定要删除此文件夹吗？其中的所有文件也将被删除。",deleteFileConfirm:"确定要删除此文件吗？",deleteFilesConfirm:"确定要删除 {{count}} 个选中的文件吗？此操作无法撤销。",deleting:"删除中...",noPermissionRenameFolder:"您没有重命名文件夹的权限",noPermissionLinkFolder:"您没有链接文件夹的权限",noPermissionDeleteFolder:"您没有删除文件夹的权限",noPermissionPrint:"您没有打印的权限",noPermissionSlice:"您没有切片文件的权限",noPermissionAddToQueue:"您没有添加到队列的权限",noPermissionDownload:"您没有下载文件的权限",noPermissionRenameFile:"您没有重命名此文件的权限",noPermissionGenerateThumbnail:"您没有生成缩略图的权限",noPermissionDeleteFile:"您没有删除此文件的权限",noPermissionCreateFolder:"您没有创建文件夹的权限",noPermissionUpload:"您没有上传文件的权限",noPermissionMoveFiles:"您没有移动文件的权限",noPermissionDeleteFiles:"您没有删除文件的权限",linkExternal:"链接外部",linkExternalFolder:"链接外部文件夹",linkExternalFolderDescription:"将主机目录（NAS、USB、网络共享）挂载到文件管理器中。文件不会被复制——直接从原始路径访问。",externalFolderNamePlaceholder:"例如：NAS打印文件",externalPath:"主机路径",externalPathHelp:"Docker主机上目录的绝对路径。必须以绑定挂载方式挂载到容器中。",readOnly:"只读",readOnlyHelp:"防止上传和删除",showHiddenFiles:"显示隐藏文件（点文件）",externalFolder:"外部文件夹",scanFolder:"扫描",toast:{folderCreated:"文件夹已创建",folderDeleted:"文件夹已删除",fileDeleted:"文件已删除",filesDeleted:"已删除 {{count}} 个文件",filesMoved:"文件已移动",folderLinked:"文件夹已链接",folderUnlinked:"文件夹已取消链接",externalFolderLinked:"外部文件夹已链接并扫描",folderScanned:"扫描完成：添加 {{added}} 个，移除 {{removed}} 个",addedToQueue:"已将 {{count}} 个文件添加到队列",addedToQueuePartial:"已添加 {{added}} 个文件，{{failed}} 个失败",failedToAddToQueue:"添加文件失败：{{error}}",fileRenamed:"文件已重命名",folderRenamed:"文件夹已重命名",thumbnailsGenerated:"已生成 {{count}} 个缩略图",thumbnailsGeneratedPartial:"已生成 {{succeeded}} 个缩略图，{{failed}} 个失败",noStlMissingThumbnails:"没有缺少缩略图的 STL 文件",failedToGenerateThumbnails:"生成缩略图失败：{{error}}",thumbnailGenerated:"缩略图已生成",failedToGenerateThumbnail:"生成缩略图失败：{{error}}"}},projects:{title:"项目",subtitle:"组织和跟踪您的 3D 打印项目",newProject:"新建项目",editProject:"编辑项目",deleteProject:"删除项目",projectName:"项目名称",description:"描述",noProjects:"暂无项目",noProjectsFiltered:"没有{{status}}项目",noProjectsFilteredHelp:"您没有任何{{status}}项目。当项目状态更改时，它们将出现在这里。",createFirst:"创建您的第一个项目以开始组织相关打印、跟踪进度和管理构建。",createFirstButton:"创建您的第一个项目",create:"创建",files:"文件",prints:"打印",plates:"板",parts:"零件",lastModified:"最后修改",deleteConfirm:"确定要删除此项目吗？归档和队列项目将被取消链接但不会被删除。",addFiles:"添加文件",removeFile:"移除文件",viewDetails:"查看详情",namePlaceholder:"例如：Voron 2.4 构建",descriptionPlaceholder:"可选描述...",urlLabel:"网址",urlPlaceholder:"https://makerworld.com/...",urlInvalid:"网址必须以 http:// 或 https:// 开头",openExternalUrl:"打开项目网址",coverImageLabel:"封面图片",coverImageAlt:"项目封面图片",coverImageUpload:"上传",coverImageReplace:"替换",coverImageRemove:"移除",color:"颜色",targetPlates:"目标板数",targetPlatesPlaceholder:"例如：25",targetPlatesHelp:"打印任务数量",targetParts:"目标零件数",targetPartsPlaceholder:"例如：150",targetPartsHelp:"所需零件总数",tagsLabel:"标签（逗号分隔）",tagsPlaceholder:"例如：voron、功能件、礼物",dueDate:"截止日期",priority:"优先级",priorityLow:"低",priorityNormal:"普通",priorityHigh:"高",priorityUrgent:"紧急",statusActive:"进行中",statusCompleted:"已完成",statusArchived:"已归档",done:"完成",completed:"已完成",failed:"失败",inQueue:"队列中",noPrintsYet:"暂无打印",printJobs:"打印任务（板）",partsPrinted:"已打印零件",failedParts:"失败零件",import:"导入",export:"导出",importProject:"导入项目",exportAll:"导出所有项目",loading:"加载项目中...",noEditPermission:"您没有编辑项目的权限",noDeletePermission:"您没有删除项目的权限",noCreatePermission:"您没有创建项目的权限",noImportPermission:"您没有导入项目的权限",noExportPermission:"您没有导出项目的权限",toast:{created:"项目已创建",updated:"项目已更新",deleted:"项目已删除",imported:"项目已导入",multipleImported:"已导入 {{count}} 个项目",importFailed:"导入失败",exported:"项目已导出（仅元数据）"}},projectDetail:{notFound:"未找到项目",backToProjects:"返回项目",export:"导出",exportProject:"导出项目",noExportPermission:"您没有导出项目的权限",noEditPermission:"您没有编辑项目的权限",partOf:"属于：",priorityLabel:"优先级：",noPrints:"此项目暂无打印",status:{active:"进行中",completed:"已完成",archived:"已归档"},priority:{low:"低",normal:"普通",high:"高",urgent:"紧急"},dueDate:{overdue:"已逾期",today:"今天到期",daysLeft:"还有 {{count}} 天"},progress:{platesProgress:"板进度",partsProgress:"零件进度",printJobs:"打印任务",parts:"零件",percentComplete:"{{percent}}% 完成",remaining:"剩余 {{count}} 个"},stats:{printJobs:"打印任务",total:"总计",failed:"{{count}} 个失败",partsPrinted:"已打印 {{count}} 个零件",printTime:"打印时间",filamentUsed:"耗材用量"},cost:{title:"成本追踪",filamentCost:"耗材成本",energy:"能源",totalCost:"总成本",total:"总计",includesBom:"含物料清单",budget:"预算",remaining:"剩余"},subProjects:{title:"子项目 ({{count}})"},notes:{title:"备注",noEditPermission:"您没有编辑备注的权限",placeholder:"添加关于此项目的备注...",empty:"暂无备注。点击编辑添加备注。"},files:{title:"文件",linkFolders:"从文件管理器链接文件夹",forQuickAccess:"到此项目以便快速访问。",fileCount:"{{count}} 个文件",empty:"未链接文件夹。前往文件管理器将文件夹链接到此项目。",noFiles:"此文件夹中没有文件。",print:"立即打印",addToQueue:"加入队列"},bom:{title:"材料清单",acquired:"已获取 {{completed}}/{{total}}",showAll:"显示全部",hideDone:"隐藏已完成",addPart:"添加零件",noAddPermission:"您没有添加零件的权限",partNamePlaceholder:"零件名称（例如：M3x8 螺丝）",partName:"零件名称",qty:"数量",price:"价格 ({{currency}})",sourcingUrlPlaceholder:"采购链接（可选）",remarksPlaceholder:"备注（可选）",deletePart:"删除零件",deleteConfirm:'确定要删除"{{name}}"吗？',noUpdatePermission:"您没有更新零件的权限",noEditPermission:"您没有编辑零件的权限",noDeletePermission:"您没有删除零件的权限",totalCost:"总成本：",empty:"材料清单中没有零件。添加硬件、电子元件或其他组件以跟踪需要采购的物品。"},timeline:{title:"活动时间线",empty:"暂无活动。"},template:{saveAsTemplate:"保存为模板",noCreatePermission:"您没有创建模板的权限"},queue:{title:"队列",viewAll:"查看全部",printing:"{{count}} 个打印中",queued:"{{count}} 个排队中"},prints:{title:"打印 ({{count}})"},toast:{projectUpdated:"项目已更新",partAdded:"零件已添加",partRemoved:"零件已移除",exportFailed:"导出失败",projectExported:"项目已导出",templateCreated:"模板已创建"}},system:{title:"系统信息",version:"版本",uptime:"运行时间",cpuUsage:"CPU 使用率",memoryUsage:"内存使用率",diskUsage:"磁盘使用率",networkInfo:"网络信息",logs:"日志",debugMode:"调试模式",enableDebug:"启用调试日志",disableDebug:"禁用调试日志",downloadLogs:"下载日志",clearLogs:"清除日志",dockerInfo:"Docker 信息",containerName:"容器名称",imageName:"镜像名称",platform:"平台",architecture:"架构"},library:{title:"耗材库",addFilament:"添加耗材",editFilament:"编辑耗材",deleteFilament:"删除耗材",vendor:"厂商",material:"材料",color:"颜色",kFactor:"K 值",temperature:"温度",noFilaments:"耗材库中没有耗材",deleteConfirm:"确定要删除此耗材吗？",importFromPrinter:"从打印机导入",exportToFile:"导出到文件"},slice:{title:"切片模型",action:"切片",actionAll:"切片全部 {{count}} 个盘面",actionAllTitle:"将所有盘面切片为单个多盘面输出（一个归档）。耗材选择覆盖项目定义的每个槽位。",allPlatesToggle:"切片全部 {{count}} 个盘面",slicing:"切片中…",printer:"打印机配置",process:"工艺配置",filament:"耗材配置",filamentSlot:"耗材 {{index}}（{{type}}）",selectPreset:"— 选择预设 —",loadingPresets:"加载预设中…",analyzingPlateFilaments:"分析打印板耗材中…",analyzingPlateFilamentsHint:"正在运行预览切片以发现此打印板使用的 AMS 插槽。之后会缓存 — 重新打开是即时的。",previewToast:"分析 {{name}} — {{elapsed}}",previewWithProgress:"分析 {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",notUsedByPlate:"— 此打印板未使用",noPresetsForSlot:"无可用预设",otherPrinters:"其他打印机",presetsLoadFailed:"加载预设失败。请先打开设置 → 配置文件以导入。",refreshPresets:"刷新",refreshPresetsTitle:"刷新预设 — 获取最新的云端和打包配置列表（在 Bambu Studio 或 Bambu Handy 中删除预设后使用）",allPresetsRequired:"必须选择所有预设",bundle:"切片器套装",bundleNone:"— 无（单独选择预设）—",bundleAllRequired:"必须选择套装的工艺和每个耗材槽",enqueuing:"提交切片任务中…",queued:"已排队…",failed:"切片失败。请检查切片器 sidecar 日志。",startedToast:"在后台切片 {{name}}…",queuedToast:"已排队：{{name}} — {{elapsed}}",runningToast:"切片 {{name}} — {{elapsed}}",runningWithProgress:"{{name}} – {{stage}} ({{percent}}%) – {{elapsed}}",runningWithProgressMultiPlate:"盘面 {{plateIndex}} / {{plateCount}} • {{name}} – {{stage}} ({{percent}}%) – {{elapsed}}",completedToast:"已切片 {{name}}",failedTitle:"切片失败",failedToast:"切片 {{name}} 失败：{{detail}}",tier:{local:"已导入",cloud:"Bambu Cloud",orcaCloud:"Orca Cloud",standard:"标准"},cloud:{notAuthenticated:"登录 Bambu Cloud（设置 → 配置文件 → Bambu Cloud）以查看云端预设。",expired:"Bambu Cloud 会话已过期 — 请重新登录以刷新云端预设。",unreachable:"目前无法访问 Bambu Cloud。本地和标准预设仍可使用。"},orcaCloud:{notAuthenticated:"登录 Orca Cloud（配置文件 → Orca Cloud）以查看您的 Orca 预设。",expired:"Orca Cloud 会话已过期 — 请重新登录以刷新您的 Orca 预设。",unreachable:"Orca Cloud 当前无法访问。其他预设仍可正常使用。"},bedType:{label:"打印板",auto:"自动（使用工艺预设）",coolPlate:"冷板",coolPlateSuperTack:"Cool Plate SuperTack",engineering:"Engineering Plate",highTemp:"High Temp Plate",texturedPEI:"Textured PEI Plate",smoothPEI:"Smooth PEI Plate"}},spoolman:{title:"Spoolman 集成",enabled:"Spoolman 已启用",url:"Spoolman URL",connected:"已连接",disconnected:"未连接",testConnection:"测试连接",sync:"同步",syncing:"同步中...",lastSync:"上次同步",linkToSpoolman:"链接到 Spoolman",openInSpoolman:"在 Spoolman 中打开",unlinkSpool:"取消链接耗材",unlinkConfirmTitle:"取消分配料盘？",unlinkConfirmMessage:"这将从此插槽中移除料盘。料盘本身的数据将保持不变。",selectSpool:"选择耗材",noUnlinkedSpools:"无未分配的料盘",linkSuccess:"料盘分配成功",linkFailed:"料盘分配失败",unlinkSuccess:"料盘取消分配成功",unlinkFailed:"料盘取消分配失败",linkedSpool:"已分配料盘",spoolId:"耗材 ID",fillSourceLabel:"(Spoolman)",weight:"重量",remaining:"剩余",disableWeightSync:"禁用 AMS 估计重量同步",disableWeightSyncDesc:"不从 AMS 估计值更新剩余容量。如果您更喜欢 Spoolman 的用量追踪而非 AMS 百分比估计，请使用此选项。新耗材仍将使用 AMS 估计值作为初始重量。",reportPartialUsage:"报告失败打印的部分用量",reportPartialUsageDesc:"当打印失败或被取消时，根据层进度报告估计的耗材使用量。"},inventory:{title:"耗材库存",subtitle:"管理您的料盘",spoolmanMixedContentTitle:"Spoolman 无法通过 HTTPS 加载 — 浏览器已阻止混合内容",spoolmanMixedContentBody:"Bambuddy 通过您的反向代理以 HTTPS 提供服务，但您的 Spoolman 地址仍为 HTTP。出于安全考虑，浏览器会阻止混合内容，因此嵌入式 Spoolman 界面无法加载。Spoolman 也必须通过 HTTPS 访问。",spoolmanMixedContentFixReverseProxy:"请将 Spoolman 置于与 Bambuddy 相同的反向代理（Traefik / Nginx / Caddy）之后并启用 HTTPS，然后在设置中将 Spoolman URL 更新为新的 HTTPS 地址。",spoolmanMixedContentFixOpenNewTab:"作为变通方案，可在新标签页中通过 HTTP 打开 Spoolman — 混合内容规则仅适用于嵌入式框架，独立标签页仍可正常使用。",spoolmanOpenInNewTab:"在新标签页中打开 Spoolman",labels:{title:"打印线材标签",selectedCount:"已选 {{count}} 项",pickSpools:"选择要打印标签的线材：",searchPlaceholder:"按名称、品牌或 #ID 搜索",filterByMaterial:"材料：",allMaterials:"全部",selectVisible:"选择所有可见 ({{count}})",deselectVisible:"取消选择可见",clearAll:"全部清除",noSpoolsToShow:"没有要显示的线材。请调整筛选条件后重试。",noMatches:"没有线材符合当前搜索或筛选。",printOne:"打印此线材的标签",printLabels:"打印标签…",bulkTitle:"从当前显示的 {{count}} 个线材中选择要打印标签的",noSpoolsTitle:"没有要打标签的线材",error:"无法生成标签：{{msg}}",sortBy:{label:"排序：",id:"按 ID",color:"按颜色"},templates:{amsHolderSmall:{label:"AMS 支架 — 小 (74 × 33 mm)",hint:"每页一个标签；适配 MakerWorld 模型 752566 (AMS 耗材标签支架) 中可打印的标签。"},amsHolderLarge:{label:"AMS 支架 — 大 (75 × 55 mm)",hint:"每页一个标签；适配 AMS 耗材标签支架的卡片插入款。空间充足，可放置色板、品牌、材料、ID 与二维码。"},box40x30:{label:"盒标签 (40 × 30 mm)",hint:"每页一张；常见的 DK/Brother 卷尺寸，适合给耗材袋和储物盒贴标签。"},box:{label:"Box label (62 × 29 mm)",hint:"每页一个标签；适配 Brother PT/QL 和 Dymo 小标签。"},averyL7160:{label:"Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)",hint:"欧洲规格纸张；每张 A4 页 21 个标签。"},avery5160:{label:"Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)",hint:"美国规格纸张；每张 Letter 页 30 个标签。"}}},addSpool:"添加耗材",editSpool:"编辑耗材",copySpool:"复制耗材",material:"材料",selectMaterial:"选择材料...",subtype:"子类型",brand:"品牌",searchBrand:"搜索品牌...",useCustomBrand:'使用"{{brand}}"',useCustomMaterial:"使用自定义材料：{{material}}",colorName:"颜色名称",colorNamePlaceholder:"翡翠白、烈焰红...",color:"颜色",hexColor:"十六进制颜色",pickColor:"选择自定义颜色",labelWeight:"标签重量",coreWeight:"空盘重量",searchSpoolWeight:"搜索耗材重量...",weightUsed:"已使用",currentWeight:"剩余重量",measuredWeight:"称量重量",spoolName:"线轴",costPerKg:"每公斤成本",storageLocation:"存放位置",storageLocationPlaceholder:"例如：货架A，抽屉1",openInInventory:"在库存中查看",measuredWeightError:"称量重量必须在 {{min}}g 到 {{max}}g 之间。",slicerFilament:"切片耗材",slicerFilamentName:"切片预设名称",slicerPreset:"切片预设",searchPresets:"搜索耗材预设...",selectedPreset:"已选择",noPresetsFound:"未找到预设",tempOverrides:"温度覆盖",note:"备注",notePlaceholder:"关于此耗材的任何备注...",category:"类别",categoryPlaceholder:"例如：生产、原型、客户A",categoryNone:"未分类",storageLocationNone:"未设置位置",lowStockThresholdOverride:"低库存阈值（此料盘）",lowStockThresholdOverrideHelp:"留空以使用全局阈值（{{global}}%）。",clearRfid:"清除 RFID 标签",rfidCleared:"RFID 标签已清除",archive:"归档",restore:"恢复",noSpools:"暂无耗材。添加您的第一个耗材开始使用。",noAvailableSpools:"没有可用的耗材。请先向库存中添加耗材，或从其他槽位取消分配一个耗材。",kProfiles:"K 值配置",addKProfile:"添加 K 值配置",assignSpool:"分配耗材",unassignSpool:"取消分配",assignSuccess:"耗材已分配，AMS 槽位已配置",assignFailed:"分配耗材失败",assignMismatchTitle:"材料不匹配",assignMismatchMessage:'所选线轴材料 "{{spoolMaterial}}" 与 {{location}} 的料槽材料 "{{trayMaterial}}" 不匹配。仍要分配吗？',assignMismatchConfirm:"仍然分配",assignPartialMismatchMessage:'线轴材料 "{{spoolMaterial}}" 与 {{location}} 的 "{{trayMaterial}}" 相近但不完全一致。是否继续？',assignProfileMismatchMessage:'线轴配置 "{{spoolProfile}}" 与 {{location}} 的料槽配置 "{{trayProfile}}" 不一致。是否继续？',assignReconfigureNote:"AMS 槽位将重新配置为使用线轴的配置。",selectSpool:"选择要分配到此槽位的耗材",assigned:"已分配",assigning:"分配中...",searchSpools:"搜索耗材...",showAllSpools:"显示所有耗材",spoolmanSpools:"Spoolman 线轴",allMaterials:"所有材料",filterByBrand:"按品牌筛选...",showArchived:"显示已归档",quickAdd:"快速添加（库存）",quantity:"数量",stock:"库存",configured:"已配置",spoolsCreated:"已创建 {{count}} 个耗材",spoolsPartiallyCreated:"已创建 {{created}} / {{total}} 个耗材（部分失败）",spoolCreated:"耗材已创建",spoolUpdated:"耗材已更新",spoolDeleted:"耗材已删除",deepLinkSpoolNotFound:"未找到耗材",deepLinkFetchFailed:"无法加载耗材 — 请重试",spoolArchived:"耗材已归档",spoolRestored:"耗材已恢复",kProfileSaveFailed:"K值配置文件设置无法保存",syncWeightSpoolNotFound:"未找到耗材 — 可能已被删除",syncWeightSpoolmanUnreachable:"Spoolman 无法访问 — 请稍后再试",syncWeightFailed:"重量同步失败",spoolmanUnreachable:"Spoolman 无法访问 — 请稍后再试",deleteSpoolNotFound:"未找到耗材 — 可能已被删除",deleteFailed:"删除耗材失败",archiveSpoolNotFound:"未找到耗材 — 可能已被删除",archiveFailed:"归档耗材失败",restoreSpoolNotFound:"未找到耗材 — 可能已被删除",restoreFailed:"恢复耗材失败",saveFailed:"保存更改失败",tagClearFailed:"清除标签失败",deleteConfirm:"确定要删除此耗材吗？此操作无法撤销。",archiveConfirm:"确定要归档此耗材吗？",advancedSettings:"高级设置",filamentInfoTab:"耗材信息",paProfileTab:"PA 配置",filamentInfo:"耗材",additional:"附加",loadingPresets:"加载云端预设中...",cloudConnected:"云端已连接",cloudNotConnected:"云端未连接（使用默认值）",recentColors:"最近",searchColors:"搜索颜色...",searchResults:"搜索结果",allColors:"所有颜色",commonColors:"常用颜色",showLess:"显示更少",showAll:"显示全部",noColorsFound:"没有颜色匹配您的搜索",noResults:"未找到匹配项",extraColorsLabel:"附加颜色",extraColorsPlaceholder:"EC984C,#6CD4BC,A66EB9,D87694",extraColorsHint:"粘贴 2 到 8 个十六进制色值,以逗号分隔。将渲染为渐变。",extraColorsInvalid:"已忽略无效的十六进制值:{{tokens}}",colorEffectLabel:"效果",colorEffect:{none:"无",sparkle:"闪光",wood:"木纹",marble:"大理石",glow:"夜光",matte:"哑光",silk:"丝光",galaxy:"星空",rainbow:"彩虹",metal:"金属",translucent:"半透明",gradient:"渐变",dualColor:"双色",triColor:"三色",multicolor:"多色"},selectMaterialFirst:"请先在耗材信息选项卡中选择材料。",noPrintersConfigured:"未配置打印机。添加打印机以使用 PA 配置。",matchingFilter:"匹配",anyBrand:"任何品牌",anyVariant:"任何变体",autoSelect:"自动选择",matches:"匹配",match:"匹配",noMatches:"无匹配",connected:"已连接",offline:"离线",printerOffline:"打印机离线。连接后查看校准配置。",noKProfilesMatch:"没有 K 值配置匹配所选耗材。",leftNozzle:"左喷嘴",rightNozzle:"右喷嘴",profilesSelected:"个校准配置已选择",totalInventory:"总库存",totalConsumed:"总消耗",byMaterial:"按材料",inPrinter:"在打印机中",lowStock:"库存不足",sinceTracking:"自开始追踪",resetConsumedCounter:"重置计数器",resetConsumedCounterTooltip:"将此料盘的已消耗克数计数器清零。剩余重量保持不变。",resetConsumedCounterConfirm:"将此料盘的已消耗克数计数器重置为 0？后续打印将从零开始计数。料盘本身、剩余重量计算和您的设置不会改变。",resetAllConsumedCounters:"重置所有计数器",resetAllConsumedCountersTooltip:"将每个料盘的已消耗克数计数器清零。剩余重量保持不变。",resetAllConsumedCountersConfirm:'将全部 {{count}} 个料盘（含已归档）的已消耗克数计数器重置为 0？这将清空"累计消耗"统计值，后续打印从零开始计数。料盘和剩余重量不会改变。',consumedCounterReset:"计数器已重置",allConsumedCountersReset:"已重置 {{count}} 个料盘的计数器",resetConsumedCounterFailed:"重置计数器失败",loadedInAms:"已装载到 AMS/外置",remaining:"剩余",weightCheck:"重量检查",lastWeighed:"上次称量",neverWeighed:"从未称量",search:"搜索耗材...",showing:"显示",to:"到",of:"共",show:"显示",spools:"个耗材",spool:"个耗材",page:"页",noSpoolsMatch:"未找到结果",noSpoolsMatchDesc:"尝试调整您的搜索或筛选条件。",active:"活跃",archived:"已归档",all:"全部",used:"已使用",new:"新的",clearFilters:"清除筛选",table:"表格",cards:"卡片",net:"净重",groupSimilar:"分组",groupedSpools:"{{count}} 个相同耗材",groupedRows:"行",columns:"列",configureColumns:"配置列",configureColumnsDesc:"拖动以重新排序列或使用箭头。使用眼睛图标切换可见性。",visible:"可见",reset:"重置",cancel:"取消",applyChanges:"应用更改",moveUp:"上移",moveDown:"下移",hideColumn:"隐藏列",showColumn:"显示列",linkToSpool:"链接到耗材",tagLinked:"标签已链接到耗材",tagLinkFailed:"链接标签失败",tagAlreadyLinked:"标签已链接到其他耗材",unknownTag:"检测到未知 RFID 标签",usageHistory:"使用历史",noUsageHistory:"暂无使用记录",printName:"打印名称",weightConsumed:"消耗重量",clearHistory:"清除",historyCleared:"使用历史已清除",fillSourceLabel:"(库存)",lowStockThresholdError:"阈值必须在 0.1 到 99.9 之间",spoolmanFilamentCatalog:"Spoolman 耗材目录",pickFromSpoolmanCatalog:"从 Spoolman 目录选择…",spoolmanFilamentSelected:"已从 Spoolman 目录选择耗材",spoolmanFilamentUnlinked:"已解除耗材目录关联",noSpoolmanFilaments:"Spoolman 目录中未找到耗材",spoolmanFilamentColorSwatch:"耗材颜色",spoolWeightManagedBySpoolman:"空线轴重量在 Spoolman 中按耗材类型管理",spoolmanCatalogLoadFailed:"无法加载 Spoolman 耗材目录"},timelapse:{title:"延时摄影",create:"创建延时摄影",download:"下载",delete:"删除",preview:"预览",frameRate:"帧率",quality:"质量",processing:"处理中...",noTimelapses:"无可用延时摄影"},ams:{title:"AMS",slot:"槽位",empty:"空",emptySlot:"空槽位",slotEmpty:"空",emptySlotReset:"未分配料盘",unknown:"未知",humidity:"湿度",temperature:"温度",filamentType:"耗材类型",filamentColor:"颜色",remaining:"剩余",history:"AMS 历史",noHistory:"无可用历史",configureSlot:"配置槽位",externalSpool:"外置耗材",profile:"配置",kFactor:"K 值",fill:"填充",configure:"配置",used:"已使用",remainingUnit:"剩余"},printModal:{title:"开始打印",selectPrinter:"选择打印机",selectPlate:"选择板",filamentMapping:"耗材映射",totalCost:"总成本：",slotRemainingShort:" - 剩余 {{grams}}g",printSettings:"打印设置",bedLeveling:"热床调平",flowCalibration:"流量校准",vibrationCalibration:"振动校准",layerInspection:"首层检查",timelapse:"延时摄影",startPrint:"开始打印",addToQueue:"添加到队列",cancel:"取消",noPrintersAvailable:"无可用打印机",printerBusy:"打印机忙碌",printerOffline:"打印机离线",sameTypeDifferentColor:"相同类型，不同颜色",filamentTypeNotLoaded:"耗材类型未装载",openCalendar:"打开日历",leftNozzle:"左",rightNozzle:"右",leftNozzleTooltip:"左喷嘴",rightNozzleTooltip:"右喷嘴",filamentOverride:"耗材覆盖",filamentOverrideHint:"可选覆盖用于基于模型的耗材分配。调度器将使用您选择的耗材而不是原始 3MF 值进行匹配。",originalFilament:"原始",overrideWith:"覆盖为",resetToOriginal:"恢复为原始",insufficientFilamentTitle:"耗材不足",insufficientFilamentMessage:"部分已分配线轴的剩余耗材少于本次打印所需：",insufficientFilamentLine:"{{printer}} - {{slot}}：需要 {{required}}g，剩余 {{remaining}}g",printAnyway:"仍然打印",forceColorMatch:"强制颜色匹配",staggerPrinterStarts:"错峰启动打印机",staggerGroupSize:"组大小",staggerInterval:"间隔（分钟）",staggerPreview:"{{printers}} 台打印机 → {{groups}} 个 {{size}} 台的组，每 {{interval}} 分钟启动一次",staggerLastGroup:"最后一组：{{count}}",staggerTotal:"共 {{minutes}} 分钟",staggerToPrinters:"分批发送到 {{count}} 台打印机",gcodeInjection:"注入自动打印G-code"},backup:{includesEncryptionKey:"本地备份包含 MFA 加密密钥文件（DATA_DIR/.mfa_encryption_key），因此备份 ZIP 是自包含的。请将 ZIP 视为敏感文件 — 任何拥有该文件的人都可以解密内部存储的 OIDC 客户端密钥和 TOTP 密钥。",title:"备份与恢复",createBackup:"创建备份",restoreBackup:"恢复备份",restoreDescription:"从备份文件替换所有数据",downloadBackup:"下载备份",uploadBackup:"上传备份",lastBackup:"上次备份",autoBackup:"自动备份",backupNow:"立即备份",restoreWarning:"警告：恢复备份将覆盖所有当前数据。",includeArchives:"包含归档",includeSettings:"包含设置",includeProfiles:"包含配置文件",backupSuccess:"备份创建成功",restoreSuccess:"备份恢复成功",backupFailed:"备份失败",restoreFailed:"恢复失败",restoreNote:"恢复期间虚拟打印机将停止",githubBackup:"GitHub 备份",enabled:"已启用",cloudLoginRequired:"需要登录 Bambu Cloud。请在 配置文件 → 云配置文件 中登录以启用 GitHub 备份。",cloudLoginRequiredShort:"需要Cloud登录",githubDescription:"自动将您的配置文件同步到私有 GitHub 仓库以进行备份和版本历史记录。",repoIsPrivate:"仓库为私有 — 可以安全备份。",repoIsPublicWarning:"仓库为公开（PUBLIC）。Bambuddy 备份包含 MQTT 凭据、Home Assistant 令牌、Prometheus 令牌、您的 Bambu Cloud 邮箱以及通过 K-profile 暴露的打印机访问代码。在您于提供商设置中将仓库改为私有之前，保存将被阻止。",repoVisibilityUnknown:"无法确定仓库的可见性。Bambuddy 拒绝向任何未确认为私有的目标进行备份；保存将被阻止。",repositoryUrl:"仓库 URL",repoUrlPlaceholderGitHub:"https://github.com/username/repo-name",repoUrlPlaceholderGitea:"https://gitea.example.com/username/repo-name",repoUrlPlaceholderForgejo:"https://forgejo.example.com/username/repo-name",repoUrlPlaceholderGitLab:"https://gitlab.com/username/repo-name",allowInsecureHttp:"允许不安全的 HTTP",allowInsecureHttpHint:"为无 TLS 的私有网络自托管实例启用",personalAccessToken:"个人访问令牌",tokenSaved:"（已保存）",enterNewToken:"输入新令牌以更新",tokenHint:"具有内容读写权限的细粒度令牌",branch:"分支",provider:"Git 提供商",providerGitHub:"GitHub",providerGitLab:"GitLab",providerGitea:"Gitea",providerForgejo:"Forgejo",manualOnly:"仅手动",hourly:"每小时",daily:"每天",weekly:"每周",includeInBackup:"包含在备份中",kProfiles:"K 配置文件",kProfilesDescription:"来自已连接打印机的压力推进校准",noPrintersConnected:"没有打印机连接",printersConnected:"{{connected}}/{{total}} 已连接",cloudProfiles:"云配置文件",cloudProfilesDescription:"来自 Bambu Cloud 的耗材、打印机和工艺预设",appSettings:"应用设置",appSettingsDescription:"Bambuddy 配置（完整数据库）",spoolInventory:"耗材库存",spoolInventoryDescription:"耗材卷轴、使用记录和成本追踪",printArchives:"打印档案",printArchivesDescription:"打印历史元数据（不含 gcode/3MF 文件）",lastBackupAt:"上次备份：",noBackupsYet:"尚无备份",next:"下次：",startingBackup:"正在启动备份...",test:"测试",enableBackup:"启用备份",testConnection:"测试连接",enterRepoUrl:"请输入仓库 URL",enterRepoAndToken:"请输入仓库 URL 和访问令牌",repoRequired:"仓库 URL 为必填项",tokenRequired:"访问令牌为必填项",githubBackupEnabled:"GitHub 备份已启用",tokenUpdated:"令牌已更新",settingsSaved:"设置已保存",failedToSave:"保存失败：{{message}}",backupCompleteFiles:"备份完成 - {{count}} 个文件已更新",backupSkippedNoChanges:"备份已跳过 - 无更改",backupFailed2:"备份失败：{{message}}",clearedLogs:"已清除 {{count}} 条日志",failedToClearLogs:"清除日志失败：{{message}}",history:"历史记录",clear:"清除",date:"日期",status:"状态",commit:"提交",localBackup:"本地备份",localBackupDescription:"创建 Bambuddy 数据的完整备份，包括数据库、档案、上传和所有文件。",downloadBackupLabel:"下载备份",completeBackupZip:"完整备份：数据库 + 所有文件（ZIP）",download:"下载",preparingBackup:"正在准备备份...",creatingArchive:"正在创建备份归档...对于大型归档可能需要一些时间。",downloadingFile:"正在下载备份文件...",backupDownloaded:"备份下载成功",failedToCreateBackup:"创建备份失败：{{message}}",restore:"恢复",restoreReplacesAll:"恢复将替换所有数据。",restoreReplacesAllDetail:"您当前的数据库和文件将被完全替换。恢复后需要重启。",restoreConfirmTitle:"恢复备份",restoreConfirmMessage:'您确定要从"{{filename}}"恢复吗？这将完全替换您当前的数据库和所有文件。恢复后需要重启应用程序。',restoreConfirmButton:"恢复备份",uploadingFile:"正在上传备份文件...",backupRestoredRestart:"备份已恢复。请重启 Bambuddy。",failedToRestore:"恢复备份失败。请检查文件格式。",reloadNow:"立即重新加载",creatingBackup:"正在创建备份",restoringBackup:"正在恢复备份",preparing:"准备中...",processing:"处理中...",doNotClosePage:"请不要关闭此页面或导航离开。对于大型备份，此操作可能需要几分钟。",restoring:"恢复中...",restoreComplete:"恢复完成",restoreFailed2:"恢复失败",importSettings:"从备份文件导入设置",pleaseWaitRestoring:"请等待数据恢复中",selectBackupFile:"点击选择备份文件（.json 或 .zip）",duplicateHandling:"重复项处理方式：",matchPrinters:"打印机",matchPrintersBy:"按序列号匹配",matchSmartPlugs:"智能插座",matchSmartPlugsBy:"按 IP 地址匹配",matchNotificationProviders:"通知提供者",matchNotificationProvidersBy:"按名称匹配",matchFilaments:"耗材",matchFilamentsBy:"按名称 + 类型 + 品牌匹配",matchArchives:"档案",matchArchivesBy:"按内容哈希匹配（始终跳过）",matchPendingUploads:"待上传",matchPendingUploadsBy:"按文件名匹配",matchSettingsTemplates:"设置和模板",matchSettingsTemplatesBy:"始终覆盖",replaceExisting:"替换现有数据",keepExisting:"保留现有数据",overwriteDescription:"用备份数据覆盖已存在的项目",keepDescription:"仅恢复尚不存在的项目",overwriteCaution:"注意：",overwriteWarning:"覆盖将用备份数据替换您当前的配置。出于安全考虑，打印机访问代码永远不会被覆盖。",cancel:"取消",processingBackup:"正在处理备份文件...",itemsRestored:"已恢复项目",itemsSkipped:"已跳过项目",restored:"已恢复",skippedAlreadyExist:"已跳过（已存在）",filesCategory:"文件（3MF、缩略图等）",andMore:"...还有 {{count}} 项",newApiKeysGenerated:"已生成新的 API 密钥",keysShownOnce:"这些密钥仅显示一次。请立即复制！",copy:"复制",noDataFound:"在备份文件中未找到可恢复的数据。",close:"关闭",scheduledBackup:"定时备份",scheduledBackupDescription:"按计划自动创建备份快照。输出目录可以挂载到 NAS 或外部存储。",frequency:"频率",backupTime:"时间",retention:"保留",retentionDescription:"保留备份数量",outputPath:"输出路径",outputPathPlaceholder:"默认：{{path}}",outputPathDescription:"留空以使用默认位置",runNow:"立即运行",backupFiles:"备份文件",noScheduledBackups:"暂无备份",deleteBackup:"删除",deleteBackupConfirm:"删除此备份文件？",backupRunning:"备份中...",scheduledBackupComplete:"备份成功完成",scheduledBackupFailed:"备份失败",nextBackup:"下次备份",backupSize:"大小",localTimeHint:"本地时间 ({{tz}})",defaultPathLabel:"默认：",categories:{settings:"设置",notification_providers:"通知提供者",notification_templates:"通知模板",smart_plugs:"智能插座",printers:"打印机",filaments:"耗材",maintenance_types:"维护类型",archives:"档案",projects:"项目",pending_uploads:"待上传",external_links:"外部链接",api_keys:"API 密钥"}},tags:{title:"标签",addTag:"添加标签",editTag:"编辑标签",deleteTag:"删除标签",tagName:"标签名称",tagColor:"标签颜色",noTags:"无标签",deleteConfirm:"确定要删除此标签吗？",manageTags:"管理标签"},uploadModal:{title:"上传 3MF 文件",dragDrop:"将 .3mf 文件拖放到此处",or:"或",browseFiles:"浏览文件",extractionInfo:"将从 3MF 文件元数据中自动提取打印机型号。",uploaded:"已上传",failed:"失败",uploading:"上传中...",upload:"上传",uploadFailed:"上传失败"},editArchive:{title:"编辑归档",name:"名称",namePlaceholder:"打印名称",printer:"打印机",noPrinter:"无打印机",project:"项目",noProject:"无项目",itemsPrinted:"打印数量",itemsPrintedHelp:"此打印任务中生产的物品数量",notes:"备注",notesPlaceholder:"添加关于此打印的备注...",externalLink:"外部链接",externalLinkPlaceholder:"https://printables.com/model/...",externalLinkHelp:"链接到 Printables、Thingiverse 或其他来源",tags:"标签",tagsPlaceholder:"添加标签...",addMoreTags:"添加更多标签...",matchingTags:'匹配"{{query}}"',existingTags:"现有标签",clickToAdd:"（点击添加）",status:"状态",failureReason:"失败原因",selectReason:"选择原因...",photos:"打印成品照片",photosHelp:"点击 + 添加打印成品照片",printResult:"打印成品",saving:"保存中...",failureReasons:{adhesionFailure:"附着力失败",spaghettiDetached:"拉丝 / 脱落",layerShift:"层偏移",cloggedNozzle:"喷嘴堵塞",filamentRunout:"耗材用完",warping:"翘曲",stringing:"拉丝",underExtrusion:"挤出不足",powerFailure:"断电",userCancelled:"用户取消",other:"其他"},statuses:{completed:"已完成",failed:"失败",aborted:"已取消",printing:"打印中"}},kProfiles:{title:"K 值配置",noPrintersConfigured:"未配置打印机",addPrinterInSettings:"在设置中添加打印机以管理 K 值配置",noActivePrinters:"无活跃打印机",enablePrinterConnection:"启用打印机连接以查看其 K 值配置",loadingProfiles:"加载 K 值配置中...",printerOffline:"打印机离线",printerOfflineDesc:"所选打印机未连接。开启电源以查看 K 值配置。",noMatchingProfiles:"无匹配的配置",noMatchingProfilesDesc:"没有配置匹配您的搜索条件",noKProfiles:"无 K 值配置",noKProfilesDesc:"未找到 {{diameter}}mm 喷嘴的压力推进配置",createFirstProfile:"创建第一个配置",printer:"打印机",nozzle:"喷嘴",refresh:"刷新",addProfile:"添加配置",export:"导出",import:"导入",select:"选择",selectAll:"全选",delete:"删除",searchPlaceholder:"按名称或耗材搜索...",allExtruders:"所有挤出机",leftOnly:"仅左侧",rightOnly:"仅右侧",allFlow:"所有流量",hfOnly:"仅高流量",sOnly:"仅标准",sortName:"排序：名称",sortKValue:"排序：K 值",sortFilament:"排序：耗材",leftExtruder:"左挤出机",rightExtruder:"右挤出机",modal:{addTitle:"添加 K 值配置",editTitle:"编辑 K 值配置",profileName:"配置名称",profileNamePlaceholder:"我的 PLA 配置",kValue:"K 值",kValuePlaceholder:"0.020",kValueHelp:"典型范围：PLA 0.01 - 0.06，PETG 0.02 - 0.10",filament:"耗材",selectFilament:"选择耗材...",noFilamentsHelp:"未找到耗材。请先在 Bambu Studio 中创建 K 值配置。",flowType:"流量类型",highFlow:"高流量",standard:"标准",nozzleSize:"喷嘴尺寸",extruder:"挤出机",extruders:"挤出机",left:"左",right:"右",notes:"备注（本地存储）",notesPlaceholder:"添加关于此配置的备注...",notesHelp:"备注保存在 Bambuddy 中，不在打印机上",syncing:"与打印机同步中...",savingExtruder:"保存到挤出机 {{current}}/{{total}}...",pleaseWait:"请稍候"},deleteConfirm:{title:"删除配置",cannotUndo:"此操作无法撤销",message:'确定要从打印机删除"{{name}}"吗？'},bulkDelete:{title:"删除配置",cannotUndo:"此操作无法撤销",message:"确定要从打印机删除 {{count}} 个选中的配置吗？"},toast:{profileSaved:"K 值配置已保存",profilesSaved:"K 值配置已保存到 {{count}} 个挤出机",selectAtLeastOneExtruder:"请至少选择一个挤出机",profileDeleted:"K 值配置已删除",profilesDeleted:"已删除 {{count}} 个配置",exportedProfiles:"已导出 {{count}} 个配置",importedProfiles:"已导入 {{count}} / {{total}} 个配置",noProfilesToExport:"无可导出的配置",invalidFileFormat:"无效的文件格式",failedToParseImport:"解析导入文件失败",failedToSaveBatch:"批量保存 K 值配置失败",noteSaved:"备注已保存",failedToSaveNote:"保存备注失败"},permission:{noRead:"您没有刷新配置的权限",noCreate:"您没有添加配置的权限",noUpdate:"您没有更新 K 值配置的权限",noDelete:"您没有删除 K 值配置的权限",noExport:"您没有导出配置的权限",noImport:"您没有导入配置的权限"}},virtualPrinter:{title:"虚拟打印机",running:"运行中",stopped:"已停止",description:{default:"启用虚拟打印机，使其在 Bambu Studio 和 OrcaSlicer 中可见。发送到此打印机的文件将直接归档而不打印。",proxy:"启用代理，将切片软件流量中继到真实打印机，允许在任何网络上远程打印。"},enable:{title:"启用虚拟打印机",visibleInSlicer:'在切片软件发现中显示为"Bambuddy"',proxyingTo:"代理到 {{name}}",notActive:"未激活"},model:{title:"打印机型号",description:"选择要模拟的打印机型号。",restartWarning:"更改型号将重启虚拟打印机"},accessCode:{title:"访问码",isSet:"访问码已设置",notSet:"未设置访问码 - 需要设置才能启用",placeholder:"输入 8 位字符代码",placeholderChange:"输入新代码以更改",hint:"必须恰好 8 个字符。切片软件使用此代码进行认证。",charCount:"({{count}}/8)"},targetPrinter:{title:"目标打印机",configured:"代理目标已配置",notConfigured:"未选择目标打印机 - 代理模式需要设置",placeholder:"选择打印机...",hint:"选择要将切片软件流量代理到的打印机。打印机必须处于局域网模式。",noPrinters:"未配置打印机。请先添加打印机以使用代理模式。"},remoteInterface:{title:"网络接口覆盖",configured:"接口覆盖已激活",optional:"可选 - 当自动检测的 IP 不正确时使用（例如多网卡、Docker、VPN）",placeholder:"自动检测（默认）...",hint:"覆盖通过 SSDP 广播并在 TLS 证书中使用的 IP 地址。在 Bambuddy 有多个网络接口时很有用。"},mode:{title:"模式",archive:"归档",archiveDesc:"立即归档文件",review:"审核",reviewDesc:"归档前审核",queue:"队列",queueDesc:"归档并添加到队列",proxy:"代理",proxyDesc:"中继到真实打印机"},autoDispatch:{title:"自动派发",description:"添加到队列时自动开始打印。关闭后，打印任务等待手动派发。"},queueForceColorMatch:{title:"强制颜色匹配",description:"拒绝派发到没有完全相同耗材类型和颜色的打印机。默认关闭 — 不启用时，队列仅按型号匹配，可能选到颜色错误的打印机。"},tailscaleDisabled:{title:"Tailscale 集成",description:"启用以将此 VP 标记为通过 Tailscale 公开。显示主机的 Tailscale 地址，以便您知道要粘贴到切片器中的 IP。CA 导入步骤保持不变 — 此开关对证书无影响。"},setupRequired:{title:"需要设置",description:"虚拟打印机功能需要额外的系统配置才能工作。包括端口转发、防火墙规则和平台特定设置。",readGuide:"启用前请阅读设置指南"},archiveNameSource:{title:"存档名称来源",description:'选择通过虚拟打印机接收文件时新存档的命名方式。"元数据"使用 3MF 中嵌入的切片标题（默认）。"文件名"使用 Bambu Studio 通过 FTP 发送的文件名 — 当您在"发送到打印机"对话框中重命名作业时非常有用。',metadata:"元数据",filename:"文件名"},caCert:{title:"切片软件证书",description:"虚拟打印机使用由 Bambuddy CA 签发的 TLS 证书。将此 CA 证书导入切片软件的信任库一次，切片软件即可接受连接 — 无需再通过命令行获取。",copy:"复制",copied:"已复制",download:"下载",fingerprint:"SHA-256"},howItWorks:{title:"工作原理",step1:"在同一局域网中，虚拟打印机会通过发现机制自动出现在您的切片软件（Bambu Studio / OrcaSlicer）中。从其他网络，通过 IP 地址和访问码手动添加。",step2:'在归档、审核和队列模式下，使用切片软件中的"发送"按钮将 3MF 文件上传到 Bambuddy。切片软件会显示"打印成功"— 文件已存储，未打印。',step3:"在代理模式下，虚拟打印机将所有流量中继到真实打印机 — 打印会立即开始，就像直接连接一样。"},status:{title:"状态详情",printerName:"打印机名称",model:"型号",serialNumber:"序列号",mode:"模式",pendingFiles:"待处理文件",targetPrinter:"目标打印机",ftpPort:"FTP 端口",mqttPort:"MQTT 端口",ftpConnections:"FTP 连接",mqttConnections:"MQTT 连接"},toast:{updated:"虚拟打印机设置已更新",failedToUpdate:"更新设置失败",copyFailed:"复制失败 — 请手动选中文本",accessCodeRequired:"请先设置访问码",targetPrinterRequired:"请先选择目标打印机",bindIpRequired:"请先设置绑定 IP",accessCodeEmpty:"访问码不能为空",accessCodeLength:"访问码必须恰好 8 个字符",created:"虚拟打印机已创建",failedToCreate:"创建虚拟打印机失败",deleted:"虚拟打印机已删除",failedToDelete:"删除虚拟打印机失败"},list:{title:"虚拟打印机",add:"添加",addFirst:"添加虚拟打印机",empty:"未配置虚拟打印机。添加一个以开始使用。"},bindIp:{title:"绑定接口",placeholder:"选择接口...",hint:"此虚拟打印机绑定的网络接口。每台打印机必须唯一。"},proxy:{accessCodeHint:"在代理模式下，在切片软件中使用目标打印机的访问码。连接会透明转发到真实打印机。"},addDialog:{title:"添加虚拟打印机",name:"名称",hint:"创建后可以配置访问码、目标打印机和其他设置。",create:"创建"},deleteConfirm:{title:"删除虚拟打印机",message:'确定要删除"{{name}}"吗？这将停止此打印机的所有服务。'}},modelViewer:{openInSlicer:"在切片软件中打开",tabs:{model:"3D 模型",gcode:"G-code 预览"},notAvailable:"不可用",notSliced:"未切片",plates:"板",allPlates:"所有板",plateNumber:"板 {{number}}",plateCount:"{{count}} 个板",plateCount_other:"{{count}} 个板",objectCount:"{{count}} 个对象",objectCount_other:"{{count}} 个对象",filamentCount:"{{count}} 种耗材",filamentCount_other:"{{count}} 种耗材",eta:"预计 {{minutes}} 分钟",noPreview:"此文件无可用预览",pagination:{pageOf:"第 {{current}} / {{total}} 页",prev:"上一页",next:"下一页"},errors:{failedToLoad:"加载文件失败",noMeshes:"3MF 文件中未找到网格",unsupportedFormat:"不支持的文件格式"}},maintenanceDescriptions:{lubricateCarbonRods:"在碳纤维杆上涂抹润滑剂以确保顺畅运动",lubricateRails:"在线性导轨上涂抹润滑剂以确保顺畅运动",cleanNozzle:"清洁热端和喷嘴以防止堵塞",checkBelts:"检查皮带张力以确保打印精度",cleanBuildPlate:"清洁构建板以获得更好的附着力",checkExtruder:"检查挤出机齿轮磨损情况",checkCooling:"确保冷却风扇正常工作",generalInspection:"打印机综合检查",cleanCarbonRods:"清洁碳纤维杆以减少摩擦",lubricateSteelRods:"在钢杆上涂抹润滑剂以确保顺畅运动",cleanSteelRods:"清洁钢杆以减少摩擦",cleanLinearRails:"擦拭线性导轨以清除灰尘和碎屑",checkPtfeTube:"检查 PTFE 管的磨损或损坏",replaceHepaFilter:"更换 HEPA 过滤器以保证空气质量",replaceCarbonFilter:"更换活性炭过滤器",lubricateLeftNozzleRail:"润滑左喷嘴导轨（H2 系列）"},smartPlugs:{offline:"离线",admin:"管理",openPlugAdminPage:"打开插座管理页面",deleteSmartPlug:"删除智能插座",turnOnSmartPlug:"开启智能插座",turnOffSmartPlug:"关闭智能插座",turnOn:"开启",turnOff:"关闭",addSmartPlug:{scanningNetwork:"扫描网络中...",chooseEntity:"选择实体...",connectionFailed:"连接失败",searchEntities:"搜索实体...",searchPowerSensors:"搜索功率传感器...",searchEnergySensors:"搜索能量传感器...",placeholders:{plugName:"客厅插座",mqttStateOnValue:"ON、true、1",mqttSameAsPower:"与功率主题相同，或不同"}},linkedTo:"关联到：",monitorOnly:"仅监控",alerts:"警报",scheduleOn:"开启 {{time}}",scheduleOff:"关闭 {{time}}",on:"开启",off:"关闭",power:"功率",kwhToday:"今日kWh",settings:"设置",automationSettings:"自动化设置",showInSwitchbar:"在开关栏显示",quickAccessSidebar:"从侧边栏快速访问",enabled:"已启用",enableAutomation:"为此插座启用自动化",autoOn:"自动开启",autoOnDescription:"打印开始时开启",autoOff:"自动关闭",autoOffDescription:"打印完成时关闭（一次性）",autoOffPersistent:"保持启用",autoOffPersistentDescription:"在打印之间保持启用而非一次性",autoOffAfterDrying:"干燥完成后自动关闭",autoOffAfterDryingDescription:"AMS 干燥完成后关闭",delayAfterDryingMinutes:"干燥后延迟（分钟）",turnOffDelayMode:"关闭延迟模式",time:"时间",temp:"温度",delayMinutes:"延迟（分钟）",tempThreshold:"温度阈值（°C）",tempThresholdDescription:"当喷嘴冷却到此温度以下时关闭",edit:"编辑",deleteConfirm:'确定要删除"{{name}}"吗？此操作无法撤销。',turnOnConfirm:'确定要开启"{{name}}"吗？',turnOffConfirm:'确定要关闭"{{name}}"吗？这将切断连接设备的电源。',failedToTurn:'无法{{action}}"{{name}}"',unknown:"未知",addTitle:"添加智能插座",editTitle:"编辑智能插座",stopScanning:"停止扫描",discoverTasmota:"发现Tasmota设备",foundDevices:"找到{{count}}个设备 - 点击选择：",noDevicesFound:"未在您的网络中找到Tasmota设备",haNotConfigured:"Home Assistant未配置。请在以下位置设置",haSettingsPath:"设置 → 网络 → Home Assistant",selectEntity:"选择实体 *",ipAddress:"IP地址 *",nameLabel:"名称 *",username:"用户名",password:"密码",authHint:"如果您的Tasmota设备不需要认证，请留空",linkToPrinter:"关联打印机",noPrinter:"无打印机（仅手动控制）",linkingDescription:"关联后可在打印开始/完成时自动开关",powerAlerts:"功率警报",alertAbove:"高于时警报（W）",alertBelow:"低于时警报（W）",alertDescription:"当电力消耗超过这些阈值时收到通知。留空以禁用该方向。",dailySchedule:"每日计划",turnOnAt:"开启时间",turnOffAt:"关闭时间",scheduleDescription:"每天在这些时间自动开关插座。留空以跳过该操作。",showOnPrinterCard:"在打印机卡片上显示",displayOnPrinterCard:"在打印机卡片上显示按钮",connectedResult:"已连接！",deviceLabel:"设备：{{name}} - ",stateLabel:"状态：{{state}}",test:"测试",delete:"删除",save:"保存",add:"添加",cancel:"取消",failedToStartScan:"无法开始扫描",nameRequired:"名称为必填项",entityRequired:"Home Assistant插座需要实体",mqttTopicRequired:"必须为功率、能源或状态监控配置至少一个MQTT主题",loadingEntities:"正在加载实体...",loading:"加载中...",failedToLoadEntities:"加载实体失败：{{error}}",noEntitiesMatching:'未找到匹配"{{search}}"的实体',noEntitiesAvailable:"无可用实体",searchingEntities:"搜索所有实体（找到{{count}}个）",showingEntities:"显示 switch、light、input_boolean（{{count}}个可用）",energyMonitoringOptional:"能源监控（可选）",energyMonitoringHint:"搜索并选择提供功率/能源数据的传感器。",powerSensorW:"功率传感器（W）",energyTodayKwh:"今日能源（kWh）",totalEnergyKwh:"总能源（kWh）",noMatchingSensors:"无匹配的传感器",none:"无",mqttNotConfigured:"MQTT代理未配置。请在以下位置设置代理地址",mqttSettingsPath:"设置 → 网络 → MQTT发布",mqttNotConfiguredSuffix:"（您不需要启用发布，只需填写代理详细信息）。",mqttMonitorOnlyDescription:"MQTT插座通过MQTT订阅接收功率/能源数据。开关控制不可用 - 请使用您的MQTT代理或家庭自动化系统。",powerMonitoring:"功率监控",energyMonitoring:"能源监控",stateMonitoring:"状态监控",optional:"可选",topic:"主题",jsonPath:"JSON路径",multiplier:"乘数",onValue:"ON值",mqttPowerHint:`JSON路径从JSON负载中提取值（例如"power_l1"）。如果主题发布原始数值，请留空。
+Valor ON: a string exata que significa "ON". Deixe vazio para detecção automática (ON, true, 1).`,restControl:"Controle",restOnUrl:"URL para ligar",restOffUrl:"URL para desligar",restOnBody:"Corpo da requisição ON",restOffBody:"Corpo da requisição OFF",restMethod:"Método HTTP",restHeaders:"Custom Headers (JSON)",restStatusUrl:"URL de status",restStatusPath:"Caminho JSON de estado",restStatusOnValue:"Valor ON",restPowerUrl:"URL de potência",restPowerPath:"Caminho JSON de energia",restPowerMultiplier:"Multiplicador de potência",restEnergyUrl:"URL de energia",restEnergyPath:"Caminho JSON de energia",restEnergyMultiplier:"Multiplicador de energia",restUrlRequired:"Ao menos uma URL (ON ou OFF) é necessária para tomadas REST",restHeadersHint:'ex. {"Authorization": "Bearer your-token"}',restBodyHint:'ex. ON, {"state": "on"}',restStatusHint:"URL para consultar o estado atual",restPathHint:"ex. state ou data.power.status",restPowerUrlHint:"URL separada para dados de potência (usa a URL de status se vazio)",restEnergyUrlHint:"URL separada para dados de energia (usa a URL de status se vazio)",restEnergyHint:"Cada valor pode usar sua própria URL ou recorrer à URL de status. Use multiplicadores para conversão de unidades (ex: 0.001 para converter Wh em kWh).",testConnection:"Testar conexão",connectionSuccess:"Conexão bem-sucedida",noSwitchesInSwitchbar:"Nenhum interruptor na barra",enableSwitchbarHint:'Ative "Mostrar na barra de interruptores" em Configurações > Smart Plugs'},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"E-mail",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"Notificações por e-mail SMTP",telegram:"Notificações via bot do Telegram",discord:"Enviar para canal do Discord via webhook",ntfy:"Notificações push gratuitas e auto-hospedáveis",pushover:"Notificações push simples e confiáveis",callmebot:"Notificações gratuitas via WhatsApp pelo CallMeBot",webhook:"POST HTTP genérico para qualquer URL",homeassistant:"Notificações persistentes no painel do Home Assistant"},lastSuccess:"Último: {{date}}",error:"Erro",printer:"Impressora:",allPrinters:"Todas as impressoras",sendTestNotification:"Enviar Notificação de Teste",eventSettings:"Configurações de Eventos",enabled:"Ativado",sendFromProvider:"Enviar notificações deste provedor",printEvents:"Eventos de Impressão",printerStatus:"Status da Impressora",amsAlarms:"Alarmes do AMS",amsHtAlarms:"Alarmes do AMS-HT",printQueue:"Fila de Impressão",start:"Início",plateCheck:"Verificação da Mesa",complete:"Concluído",failed:"Falhou",stopped:"Parado",progress:"Progresso",offline:"Offline",lowFilament:"Filamento Baixo",maintenance:"Manutenção",amsHumidity:"Umidade do AMS",amsTemp:"Temp. do AMS",amsHtHumidity:"Umidade do AMS-HT",amsHtTemp:"Temp. do AMS-HT",bedCooled:"Mesa Resfriada",firstLayer:"Primeira camada",quiet:"Silencioso",digest:"Resumo {{time}}",printStarted:"Impressão Iniciada",plateNotEmpty:"Mesa Não Vazia",plateNotEmptyDescription:"Objetos detectados antes da impressão",printCompleted:"Impressão Concluída",bedCooledLabel:"Mesa Resfriada",bedCooledDescription:"Mesa resfriou abaixo do limite após a impressão",firstLayerCompleteLabel:"Primeira camada concluída",firstLayerCompleteDescription:"Notificar com foto quando a primeira camada terminar",missingSpoolAssignmentLabel:"Atribuição de bobina ausente",missingSpoolAssignmentDescription:"Notificar quando a impressão iniciar e bandejas necessárias não tiverem bobina atribuída",printFailed:"Impressão Falhou",printStopped:"Impressão Parada",progressMilestones:"Marcos de Progresso",progressMilestonesDescription:"Notificar em 25%, 50%, 75%",printerOffline:"Impressora Offline",printerError:"Erro da Impressora",lowFilamentLabel:"Filamento Baixo",maintenanceDue:"Manutenção Necessária",maintenanceDueDescription:"Notificar quando manutenção for necessária",amsHumidityHigh:"Umidade Alta do AMS",amsHumidityHighDescription:"Umidade do AMS regular excede o limite",amsTemperatureHigh:"Temperatura Alta do AMS",amsTemperatureHighDescription:"Temperatura do AMS regular excede o limite",amsHtHumidityHigh:"Umidade Alta do AMS-HT",amsHtHumidityHighDescription:"Umidade do AMS-HT excede o limite",amsHtTemperatureHigh:"Temperatura Alta do AMS-HT",amsHtTemperatureHighDescription:"Temperatura do AMS-HT excede o limite",inventoryAlerts:"Alertas de Estoque",stockReorderAlert:"Alerta de Reposição",stockReorderAlertDescription:"O SKU atingiu seu ponto de reposição",stockBreakAlert:"Alerta de Ruptura de Estoque",stockBreakAlertDescription:"O estoque se esgotará antes da chegada do reabastecimento",jobAdded:"Trabalho Adicionado",jobAddedDescription:"Trabalho adicionado à fila",jobAssigned:"Trabalho Atribuído",jobAssignedDescription:"Trabalho baseado em modelo atribuído à impressora",jobStarted:"Trabalho Iniciado",jobStartedDescription:"Trabalho da fila começou a imprimir",jobWaiting:"Trabalho Aguardando",jobWaitingDescription:"Trabalho aguardando filamento ou impressora",jobSkipped:"Trabalho Pulado",jobSkippedDescription:"Trabalho pulado (anterior falhou)",jobFailed:"Trabalho Falhou",jobFailedDescription:"Trabalho falhou ao iniciar",queueComplete:"Fila Concluída",queueCompleteDescription:"Todos os trabalhos da fila finalizados",quietHours:"Horário de Silêncio",noNotificationsDuring:"Sem notificações durante essas horas",editProviderToChangeQuietHours:"Edite o provedor para alterar o horário de silêncio",dailyDigest:"Resumo Diário",batchNotifications:"Agrupar notificações em um único resumo diário",sendAt:"Enviar às {{time}}",editProviderToChangeDigestTime:"Edite o provedor para alterar o horário do resumo",edit:"Editar",deleteProvider:"Excluir Provedor de Notificação",deleteConfirm:'Tem certeza que deseja excluir "{{name}}"? Isso não pode ser desfeito.',delete:"Excluir",addTitle:"Adicionar Provedor de Notificação",editTitle:"Editar Provedor de Notificação",nameLabel:"Nome *",namePlaceholder:"Minhas Notificações",providerTypeLabel:"Tipo de Provedor *",configuration:"Configuração",testConfiguration:"Testar Configuração",printerFilter:"Filtro de Impressora",onlyFromPrinter:"Enviar notificações apenas para eventos desta impressora",quietHoursDnd:"Horário de Silêncio (Não Perturbe)",quietStart:"Início",quietEnd:"Fim",dailyDigestLabel:"Resumo Diário",sendDigestAt:"Enviar resumo às",digestCollected:"Os eventos serão coletados e enviados como um único resumo neste horário",notificationEvents:"Eventos de Notificação",progressPercent:"(25%, 50%, 75%)",bedCooledAfterPrint:"(após conclusão da impressão)",eventPriority:{sectionTitle:"Prioridade ntfy",helpNtfy:"Escolha uma prioridade para cada evento habilitado. O ntfy usa isso para escalar alertas (som, visibilidade, comportamento push). Níveis não definidos aqui usam o padrão do servidor ntfy.",min:"Mín",low:"Baixa",default:"Padrão",high:"Alta",urgent:"Urgente"},cancel:"Cancelar",save:"Salvar",add:"Adicionar",nameRequired:"Nome é obrigatório",fieldRequired:"{{field}} é obrigatório",phoneNumber:"Número de Telefone",apiKey:"Chave da API",serverUrl:"URL do Servidor",topic:"Tópico",authToken:"Token de Autenticação",userKey:"Chave do Usuário",appToken:"Token do Aplicativo",priority:"Prioridade",botToken:"Token do Bot",chatId:"ID do Chat",smtpServer:"Servidor SMTP",smtpPort:"Porta SMTP",security:"Segurança",authentication:"Autenticação",username:"Usuário",password:"Senha",fromEmail:"E-mail de Origem",toEmail:"E-mail de Destino",webhookUrl:"URL do Webhook",payloadFormat:"Formato do Payload",authorization:"Autorização",titleFieldName:"Nome do Campo de Título",messageFieldName:"Nome do Campo de Mensagem",editTemplate:"Editar Modelo: {{name}}",titleLabel:"Título",bodyLabel:"Corpo",titlePlaceholder:"Título da notificação...",bodyPlaceholder:"Corpo da notificação...",availableVariables:"Variáveis Disponíveis",clickToInsert:"Clique para inserir na posição do cursor no corpo",livePreview:"Pré-visualização ao Vivo",hide:"Ocultar",show:"Mostrar",loadingPreview:"Carregando pré-visualização...",enterTemplateContent:"Insira o conteúdo do modelo para ver a pré-visualização",titlePreview:"Título:",bodyPreview:"Corpo:",resetToDefault:"Restaurar Padrão",titleRequired:"Título é obrigatório",bodyRequired:"Corpo é obrigatório",notificationLog:"Registro de Notificações",showFailedOnly:"Apenas falhas",last24Hours:"Últimas 24 horas",last7Days:"Últimos 7 dias",last30Days:"Últimos 30 dias",last90Days:"Últimos 90 dias",justNow:"Agora mesmo",noFailedNotifications:"Nenhuma notificação com falha",noNotificationsLogged:"Nenhuma notificação registrada",unknownProvider:"Provedor Desconhecido",logTitle:"Título",logMessage:"Mensagem",logError:"Erro",logProvider:"Provedor: {{type}}",logTime:"Hora: {{time}}",refresh:"Atualizar",clearOld:"Limpar Antigos",statsSummary:"Últimos {{days}} dias:",statsNotifications:"notificações",statsSent:"{{count}} enviadas",statsFailed:"{{count}} com falha",eventTypes:{print_start:"Impressão Iniciada",print_complete:"Impressão Concluída",print_failed:"Impressão Falhou",print_stopped:"Impressão Parada",print_progress:"Progresso",printer_offline:"Impressora Offline",printer_error:"Erro da Impressora",filament_low:"Filamento Baixo",maintenance_due:"Manutenção Necessária",test:"Teste"},userEmail:{title:"Notificações",emailNotifications:"Notificações por E-mail",emailNotificationsDesc:"Receba notificações por e-mail para seus próprios trabalhos de impressão. Os e-mails são enviados usando as configurações SMTP definidas na Autenticação Avançada.",sendingTo:"As notificações serão enviadas para",noEmailWarning:"Sua conta não tem um endereço de e-mail. Entre em contato com um administrador para adicionar um.",printJobNotifications:"Notificações de Trabalhos de Impressão",printJobNotificationsDesc:"Escolha quais eventos acionam notificações por e-mail para os trabalhos de impressão que você envia.",printJobStarts:"Início do Trabalho de Impressão",printJobStartsDesc:"Ser notificado quando seu trabalho de impressão começar.",printJobFinishes:"Conclusão do Trabalho de Impressão",printJobFinishesDesc:"Ser notificado quando seu trabalho de impressão concluir com sucesso.",printErrors:"Erros de Impressão",printErrorsDesc:"Ser notificado quando seu trabalho de impressão falhar ou encontrar um erro.",printJobStops:"Trabalho de Impressão Parado",printJobStopsDesc:"Ser notificado quando seu trabalho de impressão for cancelado ou parado.",saveSuccess:"Preferências de notificação salvas.",saveError:"Falha ao salvar preferências de notificação."}},richTextEditor:{bold:"Negrito",italic:"Itálico",underline:"Sublinhado",bulletList:"Lista com marcadores",numberedList:"Lista numerada",alignLeft:"Alinhar à esquerda",alignCenter:"Centralizar",alignRight:"Alinhar à direita",addLink:"Adicionar link",removeLink:"Remover link"},externalLinks:{noLinksConfigured:"Nenhum link externo configurado",deleteLink:"Excluir link",removeCustomIcon:"Remover ícone personalizado",openInNewTab:"Abrir em nova aba",placeholders:{linkName:"Meu Link"}},keyboardShortcuts:{title:"Atalhos de Teclado",navigation:"Navegação",archivesSection:"Arquivos",kProfilesSection:"Perfis K",generalSection:"Geral",shortcuts:{goToPrinters:"Ir para Impressoras",goToArchives:"Ir para Arquivos",goToQueue:"Ir para Fila",goToStats:"Ir para Estatísticas",goToProfiles:"Ir para Perfis na Nuvem",goToSettings:"Ir para Configurações",focusSearch:"Focar na pesquisa",openUploadModal:"Abrir modal de upload",clearSelection:"Limpar seleção / desfocar input",contextMenu:"Menu de contexto nos cartões",refreshProfiles:"Atualizar perfis",newProfile:"Novo perfil",exitSelectionMode:"Sair do modo de seleção",showHelp:"Mostrar esta ajuda"},footer:"Pressione Esc ou clique fora para fechar"},notificationLog:{title:"Registro de Notificações",events:{printStarted:"Impressão Iniciada",printComplete:"Impressão Concluída",printFailed:"Impressão Falhou",printStopped:"Impressão Interrompida",progress:"Progresso",printerOffline:"Impressora Offline",printerError:"Erro na Impressora",lowFilament:"Filamento Baixo",maintenanceDue:"Manutenção Pendente",test:"Teste"},timeAgo:{justNow:"Agora mesmo",minutesAgo:"há {{minutes}} minutos",hoursAgo:"há {{hours}} horas"}},restoreBackup:{title:"Restaurar Backup",restoring:"Restaurando...",restoreComplete:"Restauração Concluída",restoreFailed:"Falha na Restauração",importSettings:"Importar configurações de um arquivo de backup",pleaseWait:"Aguarde enquanto seus dados estão sendo restaurados",clickToSelect:"Clique para selecionar o arquivo de backup (.json ou .zip)",howDuplicateHandling:"Como funciona o tratamento de duplicatas:",categories:{printers:"Impressoras",smartPlugs:"Tomadas Inteligentes",notificationProviders:"Provedores de Notificação",filaments:"Filamentos",archives:"Arquivos",pendingUploads:"Uploads Pendentes",settingsTemplates:"Configurações e Modelos"},matchingInfo:{printers:"correspondem pelo número de série",smartPlugs:"correspondem pelo endereço IP",notificationProviders:"correspondem pelo nome",filaments:"correspondem pelo nome + tipo + marca",archives:"correspondem pelo hash do conteúdo",pendingUploads:"correspondem pelo nome do arquivo",settingsTemplates:"sempre sobrescrito"},replaceExisting:"Substituir dados existentes",keepExisting:"Manter dados existentes",replaceDescription:"Substituir itens que já existem com os dados do backup",keepDescription:"Restaurar apenas itens que não existem",caution:"Atenção:",cautionText:"Sobrescrever substituirá suas configurações atuais pelos dados do backup. Os códigos de acesso da impressora nunca são sobrescritos por segurança.",itemsRestored:"Itens Restaurados",itemsSkipped:"Itens Ignorados",restored:"Restaurado",skipped:"Ignorado (já existe)",filesLabel:"Arquivos (3MF, miniaturas, etc.)",newApiKeysGenerated:"Novas Chaves API Geradas",newApiKeysWarning:"Essas chaves são exibidas apenas uma vez. Copie-as agora!",processingBackup:"Processando arquivo de backup...",noDataFound:"Nenhum dado foi encontrado para restaurar no arquivo de backup.",failedToRestore:"Falha ao restaurar o backup. Verifique o formato do arquivo."},backupExport:{title:"Exportar Backup",selectData:"Selecione os dados a incluir",selectAll:"Selecionar Todos",selectNone:"Selecionar Nenhum",categoryDescriptions:{settings:"Idioma, tema, preferências de atualização",notifications:"ntfy, Pushover, Discord, etc.",templates:"Modelos de mensagens personalizadas",smartPlugs:"Configurações de tomadas Tasmota",externalLinks:"Links da barra lateral para serviços externos",printers:"Informações da impressora (códigos de acesso excluídos)",plateDetection:"Imagens de referência de placa vazia",filaments:"Tipos e custos de filamento",maintenance:"Cronogramas de manutenção personalizados",archives:"Todos os dados de impressão + arquivos (3MF, miniaturas, fotos)",projects:"Projetos, itens de BOM e anexos",pendingUploads:"Uploads de impressora virtual aguardando revisão",apiKeys:"Chaves API de webhook (novas chaves geradas na importação)"},requiresPrinters:"Requer que as impressoras sejam selecionadas",zipFileWarning:"Um arquivo ZIP será criado.",zipFileDescription:"Inclui todos os arquivos 3MF, miniaturas, timelapses e fotos. Isso pode levar algum tempo e resultar em um arquivo grande.",includeAccessCodes:"Incluir Códigos de Acesso",includeAccessCodesDescription:"Para transferir para outra máquina",includeAccessCodesWarning:"Os códigos de acesso serão incluídos em texto simples. Mantenha este arquivo de backup seguro!",categoriesSelected:"{{selectedCount}} categorias selecionadas"},pendingUploads:{placeholders:{notes:"Adicione notas sobre esta impressão..."},discardUpload:"Descartar Upload",archiveAllUploads:"Arquivar Todos os Uploads",discardAllUploads:"Descartar Todos os Uploads",archive:"Arquivar",timeAgo:{justNow:"Agora mesmo",minutesAgo:"há {{minutes}} minutos",hoursAgo:"há {{hours}} horas",daysAgo:"há {{days}} dias"}},apiBrowser:{placeholders:{requestBody:"Corpo da requisição JSON...",searchEndpoints:"Pesquisar endpoints..."}},configureAmsSlot:{title:"Configurar Slot AMS",slotConfigured:"Slot Configurado!",configuringSlot:"Configurando slot:",slotLabel:"{{ams}} – Slot {{slot}}",searchPresets:"Pesquisar predefinições...",colorPlaceholder:"Nome da cor ou hex (ex.: marrom, FF8800)",clearCustomColor:"Limpar cor personalizada",noCloudPresets:"Nenhuma predefinição na nuvem. Faça login no Bambu Cloud para sincronizar.",noPresetsAvailable:"Nenhuma predefinição disponível. Faça login no Bambu Cloud ou importe perfis locais.",noMatchingPresets:"Nenhuma predefinição correspondente encontrada.",custom:"Personalizado",builtin:"Integrado",settingsSentToPrinter:"Configurações enviadas para a impressora",filamentProfile:"Perfil de Filamento",kProfileLabel:"Perfil K (Avanço de Pressão)",filteringFor:"Filtrando por: {{material}}",noKProfile:"Nenhum perfil K (usar padrão 0.020)",noMatchingKProfiles:"Nenhum perfil K correspondente encontrado. O K padrão=0.020 será usado.",selectFilamentFirst:"Selecione um perfil de filamento primeiro",kFromCalibration:"K={{value}} da calibração da impressora",customColorLabel:"Cor Personalizada (opcional)",presetColors:"Cores de {{name}}:",showLessColors:"Mostrar menos cores",showMoreColors:"Mostrar mais cores",clear:"Limpar",hexLabel:"Hex – #{{hex}}",resetting:"Redefinindo...",resetSlot:"Redefinir Slot",cancel:"Cancelar",configuring:"Configurando...",configureSlot:"Configurar Slot"},githubBackup:{title:"Backup do Git",history:"Histórico",downloadBackup:"Baixar Backup",restoreBackup:"Restaurar Backup",noBackupsYet:"Nenhum backup ainda"},emailSettings:{placeholders:{fromName:"Bambuddy"}},tagManagement:{searchTags:"Pesquisar tags...",renameTag:"Renomear tag",deleteTag:"Excluir tag"},notificationTemplates:{placeholders:{title:"Título da notificação...",body:"Corpo da notificação..."}},batchTag:{placeholders:{newTag:"Digite uma nova tag..."}},photoGallery:{deletePhoto:"Excluir foto"},filamentHoverCard:{copySpoolUuid:"Copiar UUID do carretel"},kProfilesView:{hasNote:"Possui nota",copyProfile:"Copiar perfil"},layout:{openMenu:"Abrir menu",noPermissionSystemInfo:"Você não tem permissão para visualizar informações do sistema"},dashboard:{dragToReorder:"Arrastar para reordenar",hideWidget:"Ocultar widget"},notificationProviderCard:{deleteNotificationProvider:"Excluir provedor de notificação"},fileManagerModal:{closeFileManager:"Fechar gerenciador de arquivos",sortFiles:"Ordenar arquivos",goToParentFolder:"Ir para a pasta pai",threeView:"Visualização 3D"},embeddedCameraViewer:{refreshStream:"Atualizar stream",close:"Fechar",zoomOut:"Reduzir zoom",resetZoom:"Redefinir zoom",zoomIn:"Aumentar zoom",dragToResize:"Arrastar para redimensionar"},timelapseViewer:{skipBack5s:"Voltar 5s",skipForward5s:"Avançar 5s"},notificationProviders:{descriptions:{email:"Notificações por email SMTP",telegram:"Notificações via bot do Telegram",discord:"Enviar para canal do Discord via webhook",ntfy:"Notificações push gratuitas e auto-hospedáveis",pushover:"Notificações push simples e confiáveis",callmebot:"Notificações gratuitas via WhatsApp pelo CallMeBot",webhook:"POST HTTP genérico para qualquer URL"}},logViewer:{searchPlaceholder:"Pesquisar mensagem ou nome do logger...",noLogEntries:"Nenhuma entrada de log encontrada"},switchbarPopover:{noSwitchesInSwitchbar:"Nenhum switch na barra de switches"},projectPageModal:{placeholders:{title:"Título",designer:"Designer",license:"Licença",description:"Digite a descrição...",profileTitle:"Título do perfil",profileDescription:"Descrição do perfil..."}},spoolmanSettings:{},time:{unknown:"-",waiting:"Aguardando",justNow:"Agora mesmo",now:"Agora",minsAgo:"{{count}}min atrás",inMins:"em {{count}}min",hoursAgo:"{{count}}h atrás",inHours:"em {{count}}h",daysAgo:"{{count}}d atrás",inDays:"em {{count}}d"},spoolbuddy:{nav:{dashboard:"Painel",ams:"AMS",inventory:"Inventário",writeTag:"Escrever",settings:"Configurações"},status:{nfcReady:"NFC pronto",nfcOff:"NFC desligado",offline:"Offline",online:"Online",noPrinters:"Sem impressoras",deviceOffline:"Dispositivo offline",waitingConnection:"Aguardando conexão do dispositivo...",systemReady:"Sistema pronto",status:"Status"},dashboard:{readyToScan:"Pronto para escanear",idleMessage:"Coloque um carretel na balança para identificá-lo",nfcHint:"A tag NFC será lida automaticamente",device:"Dispositivo",syncWeight:"Sincronizar peso",weightSynced:"Sincronizado!",unknownTag:"Tag desconhecida",newTag:"Nova tag detectada",onScale:"na balança",linkSpool:"Vincular ao carretel",linkTagTitle:"Vincular tag ao carretel",linkTag:"Vincular tag",selectSpool:"Selecione um carretel para vincular a esta tag:",noUntagged:"Nenhum carretel sem tag encontrado",tagDetected:"Tag detectada",noTag:"Sem tag",tagId:"Etiqueta",grossWeight:"Peso bruto",spoolSize:"Tamanho do carretel",close:"Fechar",currentSpool:"Carretel Atual",plateReady:"Mesa pronta: {{name}}",plateReadyLabel:"Mesas para liberar",plateClearAction:"Liberar",plateClearedToast:"Mesa marcada como limpa",plateClearFailed:"Não foi possível marcar a mesa como limpa"},modal:{spoolDetected:"Carretel Detectado",assignToAms:"Atribuir ao AMS",syncWeight:"Sincronizar Peso",weightSynced:"Sincronizado!",syncing:"Sincronizando...",newTagDetected:"Nova Tag Detectada",addToInventory:"Adicionar ao Inventário",assignToAmsTitle:"Atribuir ao AMS",selectSlot:"Selecionar um slot",assign:"Atribuir",assigning:"Atribuindo...",assignSuccess:"Atribuído!",assignPendingInsert:"Atribuído. O slot será configurado quando você inserir o carretel.",assignError:"Falha ao atribuir carretel. Tente novamente.",noPrinterSelected:"Selecionar uma impressora...",noAmsDetected:"Nenhum AMS detectado nesta impressora",slot:"Slot"},weight:{noReading:"Sem leitura",stable:"Estável",measuring:"Medindo...",tare:"Tarar",calibrate:"Calibrar"},spool:{remaining:"Restante",material:"Material",brand:"Marca",color:"Cor",coreWeight:"Núcleo",labelWeight:"Rótulo",scaleWeight:"Balança",netWeight:"Líquido",lastUsed:"Último uso"},ams:{noData:"Nenhum AMS detectado",connectAms:"Conecte um AMS para ver os slots",noPrinter:"Nenhuma impressora selecionada",selectPrinter:"Selecione uma impressora na barra superior",printerDisconnected:"Impressora desconectada",humidity:"Umidade",level:"Nível",active:"Ativo",slot:"Slot",empty:"Vazio"},inventory:{search:"Buscar carretéis...",empty:"Nenhum carretel no inventário",noResults:"Nenhum carretel correspondente",spools:"carretéis",addSpool:"Adicionar carretel"},settings:{tabDevice:"Dispositivo",tabDisplay:"Tela",tabScale:"Balança",tabUpdates:"Atualizações",nfcReader:"Leitor NFC",type:"Tipo",connection:"Conexão",notConnected:"N/D",deviceInfo:"Info do dispositivo",hostname:"Host",uptime:"Tempo de atividade",brightness:"Brilho",saved:"Salvo",noBacklight:"Nenhuma retroiluminação DSI detectada. O controle de brilho requer uma tela DSI.",screenBlank:"Tempo para desligar tela",screenBlankDesc:"A tela desliga após inatividade. Toque para despertar.",displayNote:"O brilho é aplicado como filtro de software.",scaleCalibration:"Calibração da balança",currentWeight:"Peso atual",tareOffset:"Tara",calFactor:"Fator",knownWeight:"Peso conhecido",calStep1:"Remova todos os itens da balança e pressione Definir zero.",calStep2:"Coloque o peso conhecido na balança.",setZero:"Definir zero",calibrateNow:"Calibrar",calibrated:"Calibrado",tareSet:"Comando de tara enviado. Aguardando dispositivo...",tareComplete:"Tara concluída!",tareTimedOut:"Tempo esgotado para a tara — o daemon do SpoolBuddy está em execução?",tareFailed:"Falha ao enviar comando de tara",zeroSet:"Ponto zero definido. Coloque o peso conhecido na balança.",calibrationDone:"Calibração concluída!",calibrationFailed:"Falha na calibração",lastCalibrated:"Última calibração",stable:"Estável",settling:"Estabilizando...",firmware:"Firmware",scale:"Balança",noDevice:"Nenhum dispositivo SpoolBuddy encontrado",daemonVersion:"Versão do daemon",currentVersion:"Atual",versionPending:"Aguardando daemon...",checking:"Verificando...",checkUpdates:"Verificar atualizações",updateAvailable:"Atualização disponível",updateInstructions:"Atualize via SSH: execute o script de instalação do SpoolBuddy.",upToDate:"Atualizado",includeBeta:"Incluir versões beta",systemConfig:"Backend e autenticação",backendUrl:"URL do backend Bambuddy",apiToken:"Token de API",apiTokenPlaceholder:"Insira o token de API",saveConfig:"Salvar configuração",systemQueued:"Configuração enfileirada.",systemFieldsRequired:"URL do backend é obrigatória.",nfcDiagnostic:"Diagnóstico NFC",scaleDiagnostic:"Diagnóstico da balança",readTagDiagnostic:"Diagnóstico de leitura de tag",testNfc:"Testar leitor",testScale:"Testar precisão",testReadTag:"Ler tag"},writeTag:{tabExisting:"Bobina existente",tabNew:"Nova bobina",tabReplace:"Substituir tag",searchPlaceholder:"Buscar por material, cor, marca...",noUntaggedSpools:"Nenhuma bobina sem tag",noTaggedSpools:"Nenhuma bobina com tag",selectSpool:"Selecione uma bobina e coloque um NTAG no leitor",placeTag:"Coloque um NTAG no leitor",tagReady:"Tag detectado — pronto para gravar",writeTag:"Gravar Tag",replaceTag:"Substituir Tag",writing:"Gravando tag...",waiting:"Aguardando SpoolBuddy...",writeSuccess:"Tag gravado com sucesso!",writeFailed:"Falha na gravação",queueFailed:"Falha ao enfileirar comando de gravação",tryAgain:"Tentar novamente",cancel:"Cancelar",replaceWarning:"O tag antigo será desvinculado. O novo tag o substituirá.",deviceOffline:"SpoolBuddy está offline",material:"Material",colorName:"Nome da cor",color:"Cor",brand:"Marca",weight:"Peso (g)",createSpool:"Criar bobina",creating:"Criando...",spoolCreated:"Bobina criada! Pronto para gravar.",createFailed:"Falha ao criar bobina",incompleteDataWarning:"Tag gravada com dados Spoolman incompletos"},quickMenu:{printerPower:"Energia da impressora",systemControls:"Sistema",restartDaemon:"Reiniciar daemon",restartBrowser:"Reiniciar navegador",reboot:"Reiniciar",shutdown:"Desligar",swipeToClose:"Deslize para baixo para fechar",confirmTitle:"Confirmar",confirmShutdown:"Tem certeza de que deseja desligar o SpoolBuddy? Você precisará de acesso físico para ligá-lo novamente.",confirmReboot:"Tem certeza de que deseja reiniciar o SpoolBuddy?",confirmRestartDaemon:"Reiniciar o daemon do SpoolBuddy? NFC e balança ficarão temporariamente indisponíveis.",confirmRestartBrowser:"Reiniciar o navegador kiosk? A tela ficará brevemente preta.",confirm:"Confirmar",confirmPlugOn:"Ligar {{name}}?",confirmPlugOff:"Desligar {{name}}?",turnOn:"Ligar",turnOff:"Desligar"}},diagnostic:{modalTitle:"Diagnóstico de conexão — {{name}}",running:"Executando diagnóstico...",runningElapsed:"Executando diagnóstico... ({{elapsed}}s)",waitingForReportHint:"Aguardando a impressora publicar um relatório de status — pode levar até {{max}} segundos.",runFailed:"Não foi possível executar o diagnóstico: {{error}}",retry:"Executar novamente",runButton:"Executar diagnóstico",sectionTitle:"Diagnóstico de conexão",sectionDescription:"Verifique por que uma impressora não conecta ou não imprime — acessibilidade das portas, modo desenvolvedor LAN, modo de rede Docker e credenciais.",noPrinters:"Nenhuma impressora configurada.",overall:{ok:"Nenhum problema encontrado — a conexão da impressora parece saudável.",warnings:"A impressora deve funcionar, mas alguns pontos exigem atenção.",problems:"Foram encontrados problemas que explicam por que a impressora não conecta ou não imprime."},check:{port_mqtt:{title:"Porta de controle (MQTT 8883)",pass:"Acessível — a impressora está aceitando conexões de controle.",fail:"A porta 8883 está inacessível. A impressora está desligada, em outro endereço IP, ou um firewall está bloqueando. Verifique o IP da impressora e se nada bloqueia a porta 8883."},port_ftps:{title:"Porta de transferência de arquivos (FTPS 990)",pass:"Acessível — o envio de arquivos de impressão funcionará.",warn:"A porta 990 está inacessível. O monitoramento ainda pode funcionar, mas o envio de impressões para a impressora falhará. Verifique se a porta 990 não está bloqueada."},port_rtsps:{title:"Porta da câmera (RTSPS 322)",pass:"Acessível — o streaming da câmera funcionará.",warn:"A porta 322 está inacessível. A visualização ao vivo da câmera não funcionará. Isso não afeta a impressão."},network_mode:{title:"Modo de rede Docker",pass:"Executando no modo de rede host.",warn:'O Bambuddy está sendo executado em rede Docker bridge. A descoberta de impressoras e a impressora virtual precisam do modo de rede host — recrie o contêiner com "network_mode: host".',skip:"Não está sendo executado no Docker — não aplicável."},subnet:{title:"Sub-rede",pass:"A impressora e o Bambuddy estão na mesma sub-rede.",warn:"A impressora ({{printer_ip}}) e o Bambuddy ({{host_ip}}) estão em sub-redes diferentes. Eles podem não se alcançar, a menos que o roteamento entre as sub-redes esteja configurado.",skip:"Não foi possível determinar a sub-rede — ignorado."},mqtt_auth:{title:"Credenciais da impressora",pass:"A impressora aceitou a conexão.",fail:"A impressora está acessível mas recusou a conexão. O código de acesso ou o número de série provavelmente está incorreto. O código de acesso muda toda vez que o Modo Desenvolvedor é alternado — copie-o novamente da tela da impressora.",skip:"Não verificado — não foi possível alcançar a impressora."},developer_mode:{title:"Modo Desenvolvedor LAN",pass:"O Modo Desenvolvedor está ativado.",fail:"O Modo Desenvolvedor está DESLIGADO na impressora. Ative-o nas configurações de LAN da impressora — e confirme com OK. Sem ele, as impressões não iniciarão.",skip:"Não foi possível verificar — requer uma conexão ativa com a impressora."},printer_publishing:{title:"Impressora publicando status",pass:"A impressora está publicando atualizações de status — AMS, filamentos e perfis K serão espelhados corretamente para o slicer.",fail:"O broker MQTT aceitou a conexão, mas a impressora não publicou nenhum relatório de status. Quase sempre é um número de série errado ou com maiúsculas/minúsculas incorretas — o tópico device/<serial>/report diferencia maiúsculas de minúsculas. Verifique o número de série nas configurações da impressora comparando com a tela do equipamento.",skip:"Não foi possível verificar — requer uma conexão ativa com a impressora."}}},systemHealth:{sectionTitle:"Saúde do sistema",sectionDescription:"Analisa os logs recentes em busca de problemas conhecidos que você normalmente pode resolver sozinho, antes que virem um chamado de suporte.",rescan:"Analisar novamente",clean:"Nenhum problema conhecido encontrado nas últimas {{times}} entradas de log.",logUnavailable:"O registro em arquivo está desativado, então os logs não podem ser analisados. Ative o registro em arquivo para usar esta verificação.",learnMore:"Como corrigir",fixLabel:"Correção:",occurrences:"Visto {{times}}× — última vez às {{lastSeen}}",category:{layer8:"Você pode corrigir isto",environment:"Ambiente",bug:"Por favor, relate isto"},signature:{"ftp-auth-rejected":{name:"A impressora rejeitou o código de acesso",cause:"A impressora recusou o login de transferência de arquivos. O código de acesso está errado ou mudou após alternar o Modo Desenvolvedor.",fix:"Copie novamente o código de acesso da tela da impressora (configurações de LAN) e atualize-o nas configurações da impressora no Bambuddy."},"ftp-connection-timeout":{name:"Tempo limite da conexão de transferência de arquivos",cause:"O Bambuddy não conseguiu acessar a porta de transferência de arquivos da impressora (FTPS 990). A porta está bloqueada, ou a impressora está desligada ou em outra sub-rede.",fix:"Verifique se nada bloqueia a porta 990 entre o Bambuddy e a impressora e se ambos estão na mesma rede."},"ftp-ssl-error":{name:"Falha no handshake seguro de transferência de arquivos",cause:"O handshake TLS com o servidor de transferência de arquivos da impressora falhou. Geralmente é causado por um firewall ou firmware desatualizado da impressora.",fix:"Atualize o firmware da impressora e verifique se nenhum firewall ou proxy intercepta a conexão na porta 990."},"mqtt-connection-flapping":{name:"A conexão com a impressora cai repetidamente",cause:"A conexão de controle (MQTT 8883) desconecta e reconecta repetidamente — geralmente por uma rede fraca ou uma porta parcialmente bloqueada.",fix:"Verifique o sinal de Wi-Fi perto da impressora, prefira uma conexão com fio e certifique-se de que a porta 8883 esteja acessível de forma confiável."},"camera-connection-refused":{name:"Transmissão da câmera inacessível",cause:"Não foi possível acessar a câmera ao vivo na porta RTSPS 322. A porta está bloqueada, ou a câmera ou a visualização ao vivo via LAN está desativada na impressora.",fix:"Ative a câmera e a visualização ao vivo via LAN na impressora e verifique se a porta 322 não está bloqueada. Isso não afeta a impressão."},"database-locked":{name:"Conflitos de gravação no banco de dados",cause:'O banco de dados SQLite apresenta erros "database is locked" sob carga — comum ao usar várias impressoras ao mesmo tempo.',fix:"Migre o Bambuddy para um banco de dados PostgreSQL externo. Consulte o guia do PostgreSQL na documentação."}}},vpDiagnostic:{title:"Verificação de configuração — {{name}}",runButton:"Executar verificação de configuração",running:"Executando verificação de configuração...",runFailed:"Não foi possível executar a verificação de configuração: {{error}}",retry:"Verificar novamente",overall:{ok:"Todas as verificações passaram — esta impressora virtual está configurada corretamente.",warnings:"A impressora virtual deve funcionar, mas alguns pontos precisam de atenção.",problems:"Foram encontrados problemas que explicam por que o slicer não consegue ver ou usar esta impressora virtual."},check:{enabled:{title:"Impressora virtual habilitada",fail:"Esta impressora virtual está desligada. Ative-a para torná-la detectável."},running:{title:"Serviços em execução",fail:"A impressora virtual está habilitada, mas seus serviços não estão em execução. Verifique o log do Bambuddy — geralmente um conflito de IP de vínculo ou um erro de permissão os interrompe."},bind_interface:{title:"Interface de rede de vínculo",fail:'A interface de vínculo não está definida ou não existe mais neste host. Escolha uma interface atual no menu "Interface de vínculo".'},access_code:{title:"Código de acesso definido",fail:"Nenhum código de acesso definido. O slicer precisa receber o mesmo código de acesso de 8 caracteres que você define aqui."},target_printer:{title:"Impressora de destino",fail:"Nenhuma impressora de destino selecionada. O modo proxy precisa de uma impressora real para a qual encaminhar.",warn:"A impressora de destino está offline no momento — o encaminhamento será retomado quando ela se reconectar."},port_ftps:{title:"Serviço de upload de arquivos (porta {{port}})",fail:"Nada está escutando na porta {{port}} do IP de vínculo, então o slicer não consegue enviar arquivos. A causa habitual é um conflito de porta nesta interface."},port_mqtt:{title:"Serviço de controle (porta {{port}})",fail:"Nada está escutando na porta {{port}} do IP de vínculo, então o slicer não consegue conectar nem mostrar o status."},port_bind:{title:"Serviço de descoberta (porta {{port}})",fail:"Nada está escutando na porta {{port}} do IP de vínculo, então a negociação de descoberta do slicer falha."},certificate:{title:"Certificado TLS",pass:"Certificado pronto. Verifique se o certificado CA do Bambuddy (acima) está importado no armazenamento de confiança do seu slicer.",fail:"O certificado TLS desta impressora virtual está ausente. Verifique se o diretório de dados do Bambuddy tem permissão de escrita."}}},bugReport:{logHealthSummary:"Problemas conhecidos encontrados nos seus logs",logHealthIntro:"Os logs recentes correspondem a problemas conhecidos. Veja as correções abaixo — resolvê-las pode solucionar seu problema sem um relatório de bug. Você ainda pode enviar um relatório abaixo.",title:"Reportar um bug",description:"Descrição",descriptionPlaceholder:"O que deu errado? Por favor, descreva o problema...",email:"Email (opcional)",emailPlaceholder:"seu@email.com.br",emailPrivacy:"Se fornecido, seu email será incluído em uma seção recolhida da issue no GitHub para que o mantenedor possa entrar em contato.",screenshot:"Captura de tela",uploadOrPaste:"Enviar, colar ou arrastar uma imagem",dataCollectedSummary:"Quais dados são incluídos no relatório?",dataIncluded:"Incluídos:",dataIncludedList:"Versão do app, SO, arquitetura, versão Python, estatísticas do banco de dados (apenas contagens), modelos de impressora, quantidade de bicos, versões de firmware, status de conexão, status de integrações (Spoolman, MQTT, HA), configurações não sensíveis, contagem de interfaces de rede, detalhes Docker, versões de dependências.",dataNeverIncluded:"Nunca incluídos:",dataNeverIncludedList:"Nomes de impressoras, números de série, códigos de acesso, senhas, endereços IP, endereços de email, chaves de API, tokens, URLs de webhook, nomes de host ou nomes de usuário.",submit:"Enviar",startLogging:"Iniciar log de depuração",stepEnableLogging:"Log de depuração ativado",stepReproduce:"Reproduza o problema agora",stepStopLogging:"Parar & enviar relatório",stopAndSubmit:"Parar & Enviar",maxDuration:"Para automaticamente após {{minutes}} min",stoppingLogs:"Coletando logs & enviando...",submitting:"Enviando relatório de bug...",submittingStepConnection:"Executando verificações de conectividade das impressoras",submittingStepVirtualPrinters:"Executando verificações de configuração das impressoras virtuais",submittingStepLogScan:"Analisando registros recentes em busca de problemas conhecidos",submittingStepSubmit:"Enviando relatório para o GitHub",submitSuccess:"Relatório de bug enviado com sucesso!",submitFailed:"Falha ao enviar relatório de bug",diagnosticChecking:"Verificando as conexões das impressoras...",diagnosticHealthy:"Verificação de conexão aprovada — nenhum problema encontrado nas suas impressoras.",diagnosticSummary:"{{problems}} de {{total}} impressoras têm problemas de conexão",diagnosticIntro:"Uma ou mais impressoras têm um problema de conexão que pode estar causando seu problema. Expanda uma impressora abaixo para ver a solução — resolvê-la pode solucionar o problema sem um relatório de bug. Você ainda pode enviar um relatório abaixo.",thankYou:"Obrigado!",submitted:"Seu relatório de bug foi enviado.",viewIssue:"Ver issue",unexpectedError:"Ocorreu um erro inesperado"},failureDetection:{title:"Detecção de Falhas por IA",description:"Monitora impressões via API ML do Obico auto-hospedada e age automaticamente em falhas detectadas.",mlUrl:"URL da API ML do Obico",mlUrlHint:"URL base do seu contêiner Obico ml_api auto-hospedado (ex.: http://192.168.1.10:3333).",test:"Testar",testSuccess:"API ML acessível e operacional.",testFailed:"Não foi possível acessar a API ML.",sensitivity:"Sensibilidade",sensitivityLow:"Baixa (menos falsos positivos)",sensitivityMedium:"Média (equilibrada)",sensitivityHigh:"Alta (detecção precoce, mais falsos positivos)",sensitivityHint:"Ajusta os limiares de confiança que disparam avisos e falhas.",action:"Ação em falha detectada",actionNotify:"Apenas notificar",actionPause:"Pausar impressão",actionPauseOff:"Pausar e cortar energia",pollInterval:"Intervalo de verificação (segundos)",pollIntervalHint:"Frequência de verificação de cada impressora durante a impressão. Mínimo 5s, máximo 120s.",externalUrlMissing:"URL externa não definida.",externalUrlHint:"A API ML busca a captura da câmera por URL. Defina a URL externa nas configurações gerais para que o contêiner da API ML possa alcançar o Bambuddy.",perPrinterTitle:"Impressoras monitoradas",perPrinterHint:"Escolha quais impressoras o serviço de detecção monitora.",monitorAll:"Monitorar todas as impressoras conectadas",statusTitle:"Status",serviceRunning:"Serviço em execução",thresholds:"Limiares baixo / alto",activePrinters:"Impressões ativas",noActivePrints:"Nenhuma impressão em andamento.",historyTitle:"Detecções recentes",noHistory:"Nenhuma detecção ainda."},makerworld:{title:"MakerWorld",description:"Cole uma URL de modelo do MakerWorld para importar e imprimir diretamente do Bambuddy — sem precisar abrir o app Bambu Handy.",pasteUrlHeader:"Importar do MakerWorld",pasteUrlPlaceholder:"https://makerworld.com/en/models/… ou cole qualquer link do MakerWorld",resolveButton:"Resolver",signInRequiredTitle:"Login no Bambu Cloud necessário para baixar",signInRequiredBody:"Você pode navegar pelos detalhes do modelo anonimamente, mas o MakerWorld exige uma conta Bambu Cloud para baixar arquivos 3MF.",openCloudSettings:"Abrir configurações do Cloud",untitledModel:"Modelo sem título",byCreator:"por {{name}}",downloadsCount:"{{count}} downloads",licensePrefix:"Licença",alreadyImported:"Já na biblioteca",openOnMakerworld:"Abrir no MakerWorld",alreadyInLibrary:"Este modelo já está na sua biblioteca — encontre-o em Gerenciador de Arquivos → MakerWorld",importSuccess:"{{filename}} importado — salvo em Gerenciador de Arquivos → MakerWorld",platesHeader:"Placas ({{count}})",plateDefaultName:"Placa {{n}}",materialCount:"{{count}} filamentos",amsRequired:"AMS necessário",slicedFor:"Fatiado para {{printer}}",alsoCompatible:"Também marcado como compatível: {{printers}}",importToLibrary:"Salvar",sliceIn:"Salvar e fatiar no {{slicer}}",disclaimer:"A integração com o MakerWorld usa endpoints de API documentados pela comunidade. Bambuddy não é afiliado nem endossado pelo MakerWorld ou pela Bambu Lab.",lastImportSuccess:"Importado para sua biblioteca",lastImportAlreadyInLibrary:"Já na sua biblioteca",viewInLibrary:"Ver no Gerenciador de Arquivos",openInBambuStudio:"Abrir no Bambu Studio",openInOrcaSlicer:"Abrir no OrcaSlicer",importTo:"Importar para o Gerenciador de Arquivos",recentImportsHeader:"Importações recentes",phaseResolving:"Resolvendo",phaseDownloading:"Baixando",folderAuto:"MakerWorld (padrão)",importAll:"Importar tudo",importAllProgress:"Importando {{current}}/{{total}}",openGallery:"Abrir galeria de imagens",galleryPrev:"Imagem anterior",galleryNext:"Próxima imagem",deleteImport:"Remover da biblioteca",importDeleting:"Removendo…",importDeleted:"Removido da biblioteca",confirmDelete:"Remover {{filename}} da biblioteca? O arquivo local será excluído, mas a placa pode ser reimportada do MakerWorld.",errors:{resolveFailed:"Não foi possível resolver essa URL do MakerWorld.",downloadFailed:"Falha no download. Tente novamente.",deleteFailed:"Não foi possível remover o arquivo da biblioteca."}},gcodeViewer:{back:"Voltar",backToArchives:"Voltar para os arquivos de impressão",backToFiles:"Voltar para o gerenciador de arquivos"},libraryTrash:{title:"Lixeira",headerButton:"Lixeira",headerTooltip:"Ver arquivos movidos para a lixeira",backToFiles:"Voltar ao gerenciador de arquivos",subtitleAdmin:"Arquivos excluídos ficam aqui por {{days}} dias e depois são removidos automaticamente. Esta visualização mostra a lixeira de todos os usuários.",subtitleUser:"Arquivos excluídos ficam aqui por {{days}} dias e depois são removidos automaticamente.",loading:"Carregando a lixeira…",loadError:"Não foi possível carregar a lixeira.",empty:"A lixeira está vazia.",summary:"{{count}} arquivos · {{size}}",emptyTrash:"Esvaziar lixeira",restore:"Restaurar",purgeNow:"Excluir agora",autoPurgeIn:"Exclusão automática em {{when}}",days:"dias",retentionLabel:"Excluir automaticamente após",selectAll:"Selecionar todos",selectOne:"Selecionar {{filename}}",selectionCount:"{{count}} selecionado(s)",bulkRestore:"Restaurar selecionados",bulkPurge:"Excluir selecionados",col:{filename:"Arquivo",folder:"Pasta",size:"Tamanho",deleted:"Movido para a lixeira",autoPurge:"Exclusão auto.",owner:"Proprietário",actions:"Ações"},confirm:{purgeTitle:"Excluir permanentemente?",purgeBody:"{{filename}} será excluído do disco e não poderá ser restaurado.",emptyTitle:"Esvaziar a lixeira?",emptyBody:"Todos os {{count}} arquivos serão excluídos do disco. Esta ação não pode ser desfeita.",bulkPurgeTitle:"Excluir permanentemente os arquivos selecionados?",bulkPurgeBody:"Os {{count}} arquivos selecionados serão excluídos do disco e não poderão ser restaurados.",cta:"Excluir permanentemente"},toast:{restored:"Arquivo restaurado.",restoreFailed:"Não foi possível restaurar o arquivo.",purged:"Arquivo excluído permanentemente.",purgeFailed:"Não foi possível excluir o arquivo.",emptied:"{{count}} arquivo(s) excluído(s) da lixeira.",emptyFailed:"Não foi possível esvaziar a lixeira.",retentionSaved:"Exclusão automática definida para {{days}} dias.",retentionFailed:"Não foi possível salvar a configuração de retenção.",bulkRestored:"{{count}} arquivo(s) restaurado(s).",bulkPurged:"{{count}} arquivo(s) excluído(s)."}},libraryPurge:{title:"Limpar arquivos antigos",headerButton:"Limpar antigos",headerTooltip:"Mover arquivos antigos em massa para a lixeira",description:"Arquivos mais antigos que o limite serão movidos para a lixeira. Pastas externas são ignoradas. Você pode restaurar da lixeira antes da exclusão automática.",ageLabel:"Mover arquivos mais antigos que",days:"dias",includeNeverPrinted:"Incluir arquivos que nunca foram impressos",effectsTitle:"O que acontece quando você clica em Limpar",effect1:"Os arquivos correspondentes são movidos para a Lixeira — ainda não são excluídos do disco.",effect2:"Você pode restaurá-los da Lixeira a qualquer momento até o fim do período de retenção.",effect3:"Após o período de retenção, o coletor da lixeira os remove permanentemente.",effect4:"Arquivos em pastas externas (vinculadas) são ignorados — Bambuddy nunca exclui bytes que não possui.",previewLoading:"Verificando quantos arquivos correspondem…",previewFailed:"Não foi possível pré-visualizar a limpeza.",previewSummary:"{{count}} arquivos · {{size}} seriam movidos para a lixeira",andMore:"…e mais {{count}}",warning:"Os arquivos são excluídos de forma suave — você pode restaurá-los da lixeira até o fim do período de retenção.",confirmCta:"Mover {{count}} para a lixeira",purging:"Movendo para a lixeira…",toast:{success:"{{count}} arquivo(s) movido(s) para a lixeira.",failed:"Não foi possível limpar os arquivos."}},libraryAutoPurge:{enableLabel:"Limpar arquivos antigos automaticamente",enableDescription:"Executa a limpeza administrativa uma vez por dia. Os arquivos vão primeiro para a lixeira — não são excluídos imediatamente.",ageLabel:"Limpar automaticamente arquivos mais antigos que",ageDescription:"Mínimo 7 dias, máximo 10 anos. Usa a mesma regra de idade do botão Limpar manual.",days:"dias",includeNeverPrinted:"Incluir arquivos que nunca foram impressos",saveFailed:"Não foi possível salvar as configurações de limpeza automática."},archivePurge:{headerButton:"Limpar antigos",headerTooltip:"Excluir arquivos antigos em massa",title:"Limpar arquivos antigos",description:"Limpa o histórico de impressão antigo. Cada arquivo envelhece pela última conclusão de impressão — reimprimir reinicia a idade, então trabalho ativo nunca é removido.",ageLabel:"Excluir arquivos não impressos nos últimos",days:"dias",effectsTitle:"O que acontece quando você clica em Limpar",effect1:"Cada arquivo correspondente é ocultado das listagens e seus arquivos são removidos do disco (3MF, miniatura, timelapse, 3MF de origem, F3D, fotos).",effect2:"A linha do arquivo permanece no banco de dados para que o Quick Stats mantenha a contribuição de filamento, tempo, custo e energia — mesmo comportamento padrão da exclusão individual.",effect3:'Marque "Remover também das estatísticas" abaixo para descartar também a contribuição do Quick Stats (equivalente à opção da exclusão individual). Esse caminho é irreversível.',effect4:"Reimprimir um arquivo reinicia seu cronômetro de idade, então arquivos ativos estão protegidos.",purgeStatsLabel:"Remover também das estatísticas",purgeStatsHint:"Remove os arquivos correspondentes do Quick Stats (filamento, tempo, custo, energia). Sem essa opção, o Quick Stats mantém cada contribuição e apenas os arquivos saem do disco.",previewLoading:"Verificando quantos arquivos correspondem…",previewFailed:"Não foi possível visualizar a limpeza.",previewSummary:"{{count}} arquivos · {{size}} seriam removidos",andMore:"…e mais {{count}}",warning:"Os arquivos são removidos do disco e não podem ser restaurados. Baixe ou favorite o que quiser manter antes de continuar.",confirmCta:"Remover {{count}} arquivo(s)",purging:"Removendo…",toast:{success:"{{count}} arquivo(s) removido(s).",failed:"Não foi possível limpar os arquivos."}},archiveAutoPurge:{enableLabel:"Limpar arquivos antigos auto.",enableDescription:"Uma vez por dia oculta das listagens os arquivos não impressos dentro do limite e remove seus arquivos do disco. Reimprimir reinicia o cronômetro.",ageLabel:"Exclusão auto. de arquivos não impressos nos últimos",ageDescription:"Mínimo 7 dias, máximo 10 anos. Baseado na última conclusão de impressão — reimprimir reinicia a idade. Remove 3MF, miniatura, timelapse, 3MF de origem, F3D e fotos.",days:"dias",purgeStatsLabel:"Remover também das estatísticas",purgeStatsDescription:"Quando ativada, a varredura diária também descarta a contribuição de cada arquivo limpo do Quick Stats (filamento, tempo, custo, energia). Desativada por padrão — o Quick Stats mantém a contribuição e apenas os arquivos saem do disco.",runNow:"Limpar arquivos agora",saveFailed:"Não foi possível salvar as configurações de limpeza automática."},cameraTokens:{title:"Tokens da API de câmera",navTitle:"Tokens da API de câmera",description:"Tokens de longa duração para incorporar o stream da câmera no Home Assistant, Frigate, quiosques ou qualquer outra ferramenta que precise de URL estável. Cada token é apenas para stream de câmera e pode ser revogado a qualquer momento.",loading:"Carregando…",confirmRevoke:{title:"Revogar este token?",body:'Qualquer dispositivo usando "{{name}}" perderá acesso imediatamente. Isso não pode ser desfeito.',cancel:"Cancelar",confirm:"Revogar"},create:{title:"Criar novo token",nameLabel:"Nome do token",namePlaceholder:"ex. Home Assistant",daysLabel:"Dias até expirar",submit:"Criar",hint:"Tempo de vida máximo 365 dias. O valor do token é exibido apenas na criação — copie agora."},created:{title:"Token criado – copie agora",warning:"Esta é a única vez que este token será visível. Após fechar este diálogo, você nunca poderá vê-lo novamente.",copy:"Copiar",dismiss:"Eu salvei"},list:{myTitle:"Meus tokens",allTitle:"Todos os usuários (visão admin)",empty:"Nenhum token ainda.",name:"Nome",owner:"Proprietário",prefix:"Prefixo",created:"Criado",expires:"Expira",lastUsed:"Último uso",revoke:"Revogar",expired:"Expirado"},toast:{created:"Token criado",createFailed:"Falha ao criar token",revoked:"Token revogado",revokeFailed:"Falha ao revogar token",loadFailed:"Falha ao carregar tokens",copied:"Copiado para a área de transferência",copyFailed:"Falha ao copiar – selecione e copie manualmente"}},forecast:{title:"Previsão de Estoque",noSpools:"Nenhum carretel ativo encontrado. Adicione carretéis ao seu inventário para ver os dados de previsão.",noUsageData:"Nenhum dado de uso disponível — não é possível projetar a linha do tempo do estoque.",sku:"SKU",material:"Material",stock:"Estoque",dailyRate:"Taxa",daysLeft:"Dias Restantes",emptyBy:"Esgota em",reorderBy:"Reabastecer até",actions:"Ações",trend:"Tendência",estimated:"Est.",noData:"Sem dados",timeframe:"Período",chartTitle:"Estoque projetado — Top 5 materiais",dashedLinesROP:"Linhas tracejadas = pontos de reposição",stockLevel:"Nível de Estoque",reorderPoint:"Ponto de Reposição",safetyMargin:"Margem de Segurança",trendLegend:"Tendência (baseada em histórico, nível de serviço 95%)",estimatedLegend:"Estimado (delta de peso)",noDataLegend:"Sem dados",ropLabel:"PR",ssLabel:"SE",safetyStockLegend:"Estoque de segurança",stockArrivalLegend:"Chegada do estoque",stockoutLegend:"Ruptura de estoque",alertCount_one:"{{count}} alerta",alertCount_other:"{{count}} alertas",order:"Pedir",globalLeadTime:"Lead time global",globalLeadTimeHint:"Lead time global mínimo — usado no cálculo do ponto de reposição para todos os SKUs",save:"Salvar",cancel:"Cancelar",settingsSaved:"Configurações salvas",failedSaveSettings:"Falha ao salvar configurações",globalLeadTimeSaved:"Prazo global salvo",skuLeadTimeOverride:"Override de Lead Time do SKU",skuLeadTimeHint:"0 = usar lead time global. Defina >0 para substituir para este SKU.",safetyMarginLabel:"Margem de Segurança",effectiveLeadTime:"Lead Time Efetivo",effectiveLeadTimeHint:"máx(global {{global}}d, SKU {{sku}}d)",reorderPointHint:"d̄ × LT + safety margin — peça quando o estoque atingir este nível",safetyMarginHint:"Estoque de segurança estatístico (z=1,65 × σ × √LT) + buffer definido pelo usuário",safetyMarginHintDays:"Buffer adicionado ao estoque de segurança estatístico.{{approx}}",safetyMarginHintDaysApprox:" ≈ {{g}}g na taxa atual.",safetyMarginHintG:"Buffer de peso fixo adicionado ao estoque de segurança estatístico.{{approx}}",safetyMarginHintGApprox:" ≈ {{days}}d na taxa atual.",individualSpools:"Carretéis individuais",labelWeight:"Etiqueta",spoolCount_one:"{{count}} carretel",spoolCount_other:"{{count}} carretéis",stockBreakRisk:"Risco de ruptura de estoque",stockBreakBefore:"Ruptura de estoque antes do reabastecimento",stockBreakDetail:"{{days}}d restantes, lead time {{lt}}d.",reorderNow:"Reabastecer agora",reorderTriggerPassed:"A data de acionamento {{date}} já passou.",shoppingList:"Lista de Compras",shoppingListItems_one:"({{count}} item)",shoppingListItems_other:"({{count}} itens)",shoppingListEmpty:"A lista de compras está vazia. Clique no ícone do carrinho em qualquer linha para adicionar itens.",addToCart:"Adicionar à lista de compras",alertsSnoozed:"Silenciar alertas para este SKU",alertsEnabled:"Ativar alertas para este SKU",addedToCart:"Adicionado à lista de compras",failedAddItem:"Falha ao adicionar item",listView:"Lista",logisticsView:"Logística",qty:"Qtd",weight:"Peso",leadTime:"Prazo de entrega",expectedRestock:"Reabastecimento Previsto",status:"Status",note:"Nota",pending:"Pendente",purchased:"Comprado",received:"Recebido",markPurchased:"Marcar como comprado",markReceived:"Marcar como recebido — adiciona carretéis ao estoque",resetToPending:"Redefinir para pendente",remove:"Remover",clearAll:"Limpar tudo",downloadCsv:"CSV",addToCartTitle:"Adicionar à lista de compras",byQuantity:"Por quantidade",byDuration:"Por duração",numberOfSpools:"Número de carretéis",lastHowManyDays:"Por quantos dias deve durar?",noUsageQty:"Sem dados de uso — quantidade definida como 1.",noteOptional:"Observação (opcional)",notePlaceholder:"ex. para o projeto X, urgente…",addNSpools_one:"Adicionar {{count}} carretel",addNSpools_other:"Adicionar {{count}} carretéis",onArrival:"Na Chegada",stockBreakIn:"Ruptura de estoque em {{days}}d.",stockRunsOutBefore:"O estoque se esgota antes do lead time de {{lt}}d decorrer.",atRate:"A {{rate}}g/dia você precisa de",moreSpools_one:"{{count}} carretel a mais",moreSpools_other:"{{count}} carretéis a mais",bridgeGap:"para cobrir a lacuna.",noReadAccess:"Você não tem permissão para visualizar previsões de inventário.",noWriteAccess:"Você não tem permissão para modificar as configurações de previsão."}},Cpe={nav:{printers:"打印机",archives:"归档",queue:"打印队列",stats:"统计",profiles:"配置文件",maintenance:"维护",projects:"项目",inventory:"耗材",files:"文件管理器",makerworld:"MakerWorld",notifications:"通知",settings:"设置",system:"系统",collapseSidebar:"收起侧边栏",expandSidebar:"展开侧边栏",update:"更新",updateAvailable:"有可用更新：v{{version}}",updateAvailableBanner:"版本 {{version}} 已发布！",viewUpdate:"查看更新",viewOnGithub:"在 GitHub 上查看",keyboardShortcuts:"键盘快捷键 (?)",switchToLight:"切换到浅色模式",switchToDark:"切换到深色模式",switchToSystem:"切换到系统模式",smartSwitches:"智能开关",logout:"退出登录",installApp:"安装应用",installAppSuccess:"Bambuddy 已安装"},common:{save:"保存",saving:"保存中...",cancel:"取消",delete:"删除",edit:"编辑",add:"添加",close:"关闭",confirm:"确认",loading:"加载中...",error:"错误",errorLoading:"加载错误",retry:"重试",success:"成功",warning:"警告",enabled:"已启用",disabled:"已禁用",yes:"是",no:"否",on:"开",off:"关",all:"全部",none:"无",search:"搜索",filter:"筛选",sort:"排序",refresh:"刷新",download:"下载",upload:"上传",uploading:"上传中...",uploadFailed:"上传失败",actions:"操作",status:"状态",name:"名称",description:"描述",date:"日期",time:"时间",hours:"小时",minutes:"分钟",seconds:"秒",days:"天",enable:"启用",disable:"禁用",permissions:"权限",noPrinters:"未配置打印机",noData:"暂无数据",linkNotFound:"未找到链接",required:"必填",optional:"可选",dismiss:"关闭",apply:"应用",reset:"重置",export:"导出",import:"导入",clear:"清除",selectAll:"全选",deselectAll:"取消全选",noChange:"— 不更改 —",unchanged:"未更改",unassigned:"未分配",unknown:"未知",unknownError:"未知错误",today:"今天",tomorrow:"明天",asap:"尽快",overdue:"已逾期",now:"现在",collapse:"收起",expand:"展开",viewArchive:"查看归档",viewInFileManager:"在文件管理器中查看",addedBy:"由 {{username}} 添加",prints:"次打印",more:"还有 {{count}} 个",ascending:"升序",descending:"降序",back:"返回",copy:"复制",copied:"已复制!",printer:"打印机",remove:"移除",type:"类型",print:"打印",rename:"重命名",move:"移动",create:"创建",duplicate:"复制",left:"左",right:"右"},printers:{addPreflight:{checking:"正在检查连接...",warning:"部分连接检查未通过。此打印机可能显示为离线。请查看下方的检查项，尽量修复，或仍然保存。",back:"返回",saveAnyway:"仍然保存"},title:"打印机",addPrinter:"添加打印机",editPrinter:"编辑打印机",deletePrinter:"删除打印机",printerName:"打印机名称",serialNumber:"序列号",ipAddress:"IP 地址 / 主机名",accessCode:"访问码",model:"型号",nozzleCount:"喷嘴数量",autoArchive:"自动归档",status:{available:"可用",idle:"空闲",printing:"打印中",paused:"已暂停",offline:"离线",problem:"故障",error:"错误",finished:"已完成",unknown:"未知"},temperatures:{nozzle:"喷嘴",bed:"热床",chamber:"腔室"},progress:"{{percent}}% 完成",timeRemaining:"剩余 {{time}}",deleteConfirm:'确定要删除"{{name}}"吗？',maintenanceOk:"维护正常",maintenanceWarning:"{{count}} 个警告",maintenanceWarning_plural:"{{count}} 个警告",maintenanceDue:"{{count}} 个到期",maintenanceDue_plural:"{{count}} 个到期",sort:{name:"名称",status:"状态",model:"型号",location:"位置",ascending:"升序排列",descending:"降序排列"},cardSize:{small:"小卡片",medium:"中卡片",large:"大卡片",extraLarge:"超大卡片"},hideOffline:"隐藏离线",nextAvailable:"下一个可用",powerOn:"开机",offlinePrintersWithPlugs:"带智能插座的离线打印机",noPrintersConfigured:"尚未配置打印机",search:"搜索打印机...",noSearchResults:"没有打印机符合您的搜索或筛选条件",filter:{allStatuses:"所有状态",allLocations:"所有位置"},toolbar:{filters:"筛选",view:"视图",actions:"操作"},readyToPrint:"准备打印",external:"外部",extL:"外置左",extR:"外置右",deleteArchives:"删除打印归档",noLabel:"无标签",printPreview:"打印预览",width:"宽度",height:"高度",noObjectsFound:"未找到对象",objectsLoadedOnPrintStart:"对象在打印开始时加载",willBeSkipped:"将被跳过",name:"名称",serialCannotBeChanged:"序列号无法更改",locationHelp:"用于分组打印机和筛选队列任务",wifiSignal:{veryWeak:"非常弱",weak:"弱",fair:"一般",good:"良好",excellent:"优秀"},maintenanceUpToDate:"所有维护均已完成 - 点击查看",chamberLightOn:"打开腔室灯",chamberLightOff:"关闭腔室灯",files:"文件",browseFiles:"浏览打印机文件",autoOffAfterPrint:"打印后自动关机",autoOffExecuted:"已执行自动关机 - 开启打印机以重置",hmsErrors:"HMS 错误",viewHmsErrors:"查看 {{count}} 个 HMS 错误",resume:"继续",pause:"暂停",stop:"停止",camera:"摄像头",skipObject:"跳过对象",reconnect:"重新连接",forceRefresh:"强制刷新",forceRefreshSuccess:"已请求刷新",mqttDebug:"MQTT 调试",printerInformation:"打印机信息",copyToClipboard:"复制",copied:"已复制！",state:"状态",wifiSignalLabel:"WiFi 信号",developerMode:"开发者模式",enabled:"已启用",disabled:"已禁用",addedOn:"添加日期",sdCard:"SD 卡",inserted:"已插入",notInserted:"未插入",totalPrintHours:"打印时长",activeNozzle:"当前：{{nozzle}} 喷嘴",nozzleRack:"喷嘴架",nozzleDocked:"已停靠",nozzleMounted:"已安装",nozzleActive:"使用中",nozzleIdle:"空闲",nozzleDiameter:"直径",nozzleType:"类型",nozzleStatus:"状态",nozzleFilament:"耗材",nozzleWear:"磨损",nozzleMaxTemp:"最高温度",nozzleSerial:"序列号",nozzleHardenedSteel:"硬化钢",nozzleStainlessSteel:"不锈钢",nozzleTungstenCarbide:"碳化钨",nozzleFlow:"流量",nozzleHighFlow:"高流量",nozzleStandardFlow:"标准",firmwareUpdate:"固件更新",firmwareInstructions:"在打印机触摸屏上，前往",firmwareNav:"导航到",settings:"设置",firmware:"固件",discoverPrinters:"发现打印机",searching:"搜索中...",manualEntry:"手动输入",addFromCloud:"从云端添加",toast:{printerDeleted:"打印机已删除",missingSpoolAssignment:"已在{{printer}}上开始打印。以下料槽未分配耗材: {{slots}}",printerAdded:"打印机已添加",printerUpdated:"打印机已更新",failedToDelete:"删除打印机失败",failedToAdd:"添加打印机失败",connectionFailedNotAdded:"无法连接到打印机。请检查 IP 地址、序列号和访问码，并确认已启用仅局域网（LAN-only）模式。该打印机未被添加。",failedToUpdate:"更新打印机失败",commandSent:"命令已发送",failedToSendCommand:"发送命令失败",turnedOn:"{{name}} 已开启",failedToPowerOn:"开启 {{name}} 失败",scriptTriggered:"脚本已触发",printStopped:"打印已停止",printPaused:"打印已暂停",printResumed:"打印已继续",referenceDeleted:"参考已删除",detectionAreaSaved:"检测区域已保存",failedToRunScript:"运行脚本失败",failedToStopPrint:"停止打印失败",failedToPausePrint:"暂停打印失败",failedToResumePrint:"继续打印失败",failedToControlChamberLight:"控制腔室灯失败",failedToSetSpeed:"设置打印速度失败",failedToUpdateSetting:"更新设置失败",failedToSkipObjects:"跳过对象失败",failedToRereadRfid:"重新读取 RFID 失败",failedToCheckPlate:"检查打印板失败",failedToUpdateLabel:"更新标签失败",failedToDeleteReference:"删除参考失败",failedToSaveDetectionArea:"保存检测区域失败",plateCheckEnabled:"打印板检查已启用",plateCheckDisabled:"打印板检查已禁用",calibrationSaved:"校准已保存！",calibrationFailed:"校准失败",rfidRereadInitiated:"已发起 RFID 重新读取",loadInitiated:"加载耗材中…",unloadInitiated:"卸载耗材中…",failedToLoad:"加载耗材失败",failedToUnload:"卸载耗材失败"},connection:{connected:"已连接",offline:"离线"},plateStatus:{markCleared:"将打印板标记为已清理",cleared:"打印板已清理",notCleared:"打印板未清理",inUse:"打印板使用中"},queue:{inQueue:"队列中有 {{count}} 个打印任务",inQueue_plural:"队列中有 {{count}} 个打印任务"},controls:"控制",rfid:{reread:"重新读取 RFID"},ams:{load:"加载",unload:"卸载"},bedJog:{title:"移动热床",bed:"热床",step:"步长 (mm)",up:"热床上移",down:"热床下移",disabledWhilePrinting:"打印中已禁用",notHomedTitle:"打印机未归零",notHomedMessage:"打印机自上次打印以来尚未归零。请先执行自动归零以确保安全定位（先停放喷头，然后归零 X、Y 和 Z），或者直接移动 — 软限位将被绕过。",homeZ:"自动归零",moveAnyway:"强制移动",homingStarted:"打印机自动归零中…"},permission:{noAdd:"您没有添加打印机的权限",noEdit:"您没有编辑打印机的权限",noDelete:"您没有删除打印机的权限",noControl:"您没有控制打印机的权限",noFiles:"您没有访问打印机文件的权限",noAmsRfid:"您没有重新读取 AMS RFID 的权限",noSmartPlugControl:"您没有控制智能插座的权限",noCamera:"您没有查看摄像头的权限"},modal:{addTitle:"添加打印机",editTitle:"编辑打印机",myPrinter:"我的打印机",selectModel:"选择型号...",locationGroup:"位置 / 分组（可选）",locationPlaceholder:"例如：工作室、办公室、地下室",autoArchiveLabel:"自动归档已完成的打印",fromPrinterSettings:"来自打印机设置",modelOptional:"型号（可选）",saveChanges:"保存更改"},skipObjects:{tooltip:"跳过对象",onlyWhilePrinting:"跳过对象（仅在打印时）",requiresMultiple:"跳过对象（需要2个以上对象）",title:"跳过对象",matchIdsInfo:"将 ID 与打印机显示屏上的 ID 进行对照",printerShowsIds:"打印机屏幕上显示构建板上对象的 ID",skipSelected:"跳过所选",skipping:"跳过中...",noObjectsSelected:"未选择对象",selectObjectsToSkip:"选择要从当前打印中跳过的对象",skipped:"已跳过",objectsSkipped:"对象已跳过",activeCount:"{{count}} 个活跃",waitForLayer:"等待第2层以上才能跳过对象（当前第 {{layer}} 层）",skip:"跳过",confirmTitle:"跳过对象？",confirmMessage:'确定要跳过"{{name}}"吗？此操作无法撤销。'},confirm:{deleteTitle:"删除打印机",deleteMessage:'确定要删除"{{name}}"吗？这将移除所有连接设置。',deleteArchivesNote:"此打印机的所有打印历史将被永久删除。",keepArchivesNote:"打印历史将保留，但不再与此打印机关联。",stopTitle:"停止打印",stopMessage:'确定要停止"{{name}}"上的当前打印吗？这将取消打印任务。',stopButton:"停止打印",pauseTitle:"暂停打印",pauseMessage:'确定要暂停"{{name}}"上的当前打印吗？',pauseButton:"暂停打印",resumeTitle:"继续打印",resumeMessage:'确定要继续"{{name}}"上的打印吗？',resumeButton:"继续打印",powerOnTitle:"开启打印机",powerOnMessage:'确定要打开"{{name}}"的电源吗？',powerOnButton:"开机",powerOffTitle:"关闭打印机",powerOffMessage:'确定要关闭"{{name}}"的电源吗？',powerOffWarning:'警告："{{name}}"正在打印中！确定要关闭电源吗？这将中断打印并可能损坏打印机。',powerOffButton:"关机",haToggleTitle:'切换"{{name}}"',haToggleMessage:"切换 Home Assistant 实体 {{entity}}？如果当前为开启状态，可能会关闭电源。",haToggleWarning:'警告："{{name}}"正在打印中！切换 {{entity}} 可能会切断电源并中断打印。是否继续？',haToggleButton:"切换"},bulk:{select:"选择",selectAll:"全选",selectByLocation:"按位置选择",selected:"已选择{{count}}台",actions:{stop:"停止",pause:"暂停",resume:"继续",clearPlate:"清除打印床",clearHMS:"清除通知"},confirm:{stopTitle:"停止{{count}}个打印任务",stopMessage:"这将取消{{count}}台打印机上的活动打印任务。此操作无法撤销。",stopButton:"全部停止",pauseTitle:"暂停{{count}}个打印任务",pauseMessage:"这将暂停{{count}}台打印机上的活动打印任务。",pauseButton:"全部暂停",clearPlateTitle:"清除{{count}}个打印床",clearPlateMessage:"这将清除{{count}}台打印机的打印床，可能会触发队列中的任务。",clearPlateButton:"全部清除"},success:"{{action}}已在{{count}}台打印机上完成",partial:"{{succeeded}}成功，{{failed}}失败",noneApplicable:"没有选中的打印机处于适合此操作的状态",selectByState:"按状态选择"},discovery:{title:"发现打印机",searching:"搜索中...",scanning:"扫描中...",scanProgress:"扫描中... {{scanned}}/{{total}}",foundPrinters:"发现 {{count}} 台打印机",noPrintersFound:"未找到打印机",noPrintersFoundSubnet:"在指定子网中未找到打印机。",noPrintersFoundNetwork:"在网络上未找到打印机。",allConfigured:"所有发现的打印机已配置完毕。",alreadyAdded:"已添加",select:"选择",manualEntry:"手动输入",addFromCloud:"从云端添加",subnetToScan:"要扫描的子网",dockerNote:"检测到 Docker 环境。请以 CIDR 格式输入打印机所在子网。需要在 docker-compose.yml 中设置 network_mode: host。",scanSubnet:"扫描子网查找打印机",discoverNetwork:"在网络上发现打印机",scanningSubnet:"正在扫描子网查找拓竹打印机...",scanningNetwork:"正在扫描网络...",serialRequired:"需要序列号",unknown:"未知",failedToStart:"启动发现失败",customSubnetOption:"自定义子网...",customSubnetLabel:"自定义子网 (CIDR)",customSubnetNote:"如果您的打印机与此服务器位于不同的网络中，请使用自定义子网。FTP (990) 和 MQTT (8883) 端口必须能够跨路由边界访问。"},drying:{start:"开始干燥",stop:"停止干燥",temperature:"温度",duration:"时长",hours:"小时",timeRemaining:"剩余 {{time}}",active:"干燥中",notSupported:"不支持干燥",powerRequired:"连接AMS电源适配器以启用干燥",startingDrying:"正在启动干燥...",stoppingDrying:"正在停止干燥...",rotateTray:"干燥时旋转料盘"},filaments:"耗材",openCameraOverlay:"打开摄像头叠加层",openCameraWindow:"在新窗口中打开摄像头",firmwareUpdateAvailable:"固件更新可用：{{current}} → {{latest}}",firmwareUpToDate:"固件 {{version}} — 已是最新",firmwareUpdateButton:"更新",plateDetection:{noPermission:"您没有更新打印机的权限",enabledClick:"打印板检查已启用 - 点击禁用",disabledClick:"打印板检查已禁用 - 点击启用",manageCalibration:"管理打印板检测校准",calibrationRequired:"需要校准",calibrationInstructions:"请确保构建板<strong>完全空置</strong>，然后点击校准。",calibrationDescription:"校准会拍摄空置打印板的参考图像。后续检查将与此参考进行比较以检测物体。",calibrationTip:"<strong>提示：</strong>您最多可以为不同的打印板存储5个校准。系统会在检查时自动使用最佳匹配。",plateEmpty:"打印板似乎是空的",objectsDetected:"在打印板上检测到物体",confidence:"置信度",difference:"差异",analysisPreview:"分析预览：",analysisLegend:"绿色框 = 检测区域，红色覆盖 = 与校准的差异",savedReferences:"已保存的参考 ({{count}}/{{max}})",deleteReference:"删除参考",labelPlaceholder:"标签...",clickToEdit:"{{label}} - 点击编辑",clickToAddLabel:"点击添加标签"},speed:{title:"打印速度",silent:"静音 (50%)",standard:"标准 (100%)",sport:"运动 (124%)",ludicrous:"疯狂 (166%)"},airduct:{title:"风道模式",cooling:"制冷",heating:"加热"},noSdCard:"无SD",door:{open:"开",closed:"关"},fans:{partCooling:"零件冷却风扇",auxiliary:"辅助风扇",chamber:"腔室风扇"},clickToViewHmsErrors:"点击查看 HMS 错误",estimatedCompletion:"预计完成时间",plateNumber:"板 {{number}}",slotOptions:"槽位选项",amsPopup:{friendlyName:"AMS 名称",friendlyNamePlaceholder:"例如 AMS 友好名称",serialNumber:"序列号",firmwareVersion:"固件",save:"保存",clear:"清除",noEditPermission:"您没有重命名 AMS 单元的权限"},firmwareModal:{title:"固件更新",titleUpToDate:"固件信息",currentVersion:"当前版本：",latestVersion:"最新版本：",releaseNotes:"发布说明",checkingPrereqs:"正在检查前提条件...",sdCardReady:"SD 卡已就绪。点击下方上传固件。",uploadedSuccess:"固件已上传到 SD 卡！",applyInstructions:"在打印机上应用更新：",step1:"在打印机触摸屏上，前往<strong>设置</strong>",step2:"导航到<strong>固件</strong>",step3:"选择<strong>从 SD 卡更新</strong>",step4:"更新将需要 10-20 分钟",done:"完成",starting:"启动中...",uploadFirmware:"上传固件",uploadFailed:"上传启动失败：{{error}}",uploadedToast:"固件已上传！请在打印机屏幕上触发更新。",availableVersions:"可用版本",usable:"可用",unavailable:"不可用",installed:"已安装",newerBadge:"较新",olderBadge:"较旧",currentBadge:"当前"},accessCodePlaceholder:"留空以保持当前值",roi:{title:"检测区域 (ROI)",xStart:"X 起点",yStart:"Y 起点",width:"宽度",height:"高度",instruction:"调整检测区域以聚焦到构建板。预览中的绿色框显示当前区域。"},developerModeWarning:"以下打印机未启用开发者局域网模式：{{names}}。某些功能可能无法使用。",howToEnable:"如何启用",incompatibleFile:"此文件是为 {{slicedFor}} 切片的，但该打印机是 {{printerModel}}",dropNotPrintable:"只能打印 .gcode 和 .gcode.3mf 文件",dropToPrint:"拖放以打印",cannotPrint:"打印机忙碌"},archives:{title:"打印归档",searchPlaceholder:"搜索归档...",filterByPrinter:"按打印机筛选",filterByStatus:"按状态筛选",sortBy:"排序方式",sortNewest:"最新优先",sortOldest:"最旧优先",sortName:"名称",sortDuration:"时长",sortLargest:"最大优先",sortSmallest:"最小优先",sortSize:"大小",noArchives:"未找到归档",noArchivesSearch:"没有匹配搜索的归档",originalPrintNotVisible:"原始打印不可见 - 请尝试清除筛选条件",noArchivesYet:"暂无归档",prints:"条打印",pagination:{showing:"显示",to:"至",of:"共",show:"每页",page:"页",all:"全部"},loadingArchives:"加载归档中...",releaseToUpload:"释放以上传",showAll:"显示全部",showFavoritesOnly:"仅显示收藏",gridView:"网格视图",listView:"列表视图",calendarView:"日历视图",logView:"打印日志",manageTags:"管理标签",showFailedPrints:"显示失败的打印",hideFailedPrints:"隐藏失败的打印",hideDuplicates:"隐藏重复项",viewOriginalPrint:"点击查看原始打印 (#{{id}})",printTime:"打印时间",filamentUsed:"耗材用量",cost:"成本",reprint:"重新打印",preview:"预览",deleteArchive:"删除归档",deleteConfirm:"确定要删除此归档吗？",favorite:"收藏",unfavorite:"取消收藏",viewDetails:"查看详情",status:{completed:"已完成",failed:"失败",stopped:"已停止"},toast:{source3mfAttached:"源 3MF 已附加：{{filename}}",failedUploadSource3mf:"上传源 3MF 失败",source3mfRemoved:"源 3MF 已移除",failedRemoveSource3mf:"移除源 3MF 失败",f3dAttached:"F3D 已附加：{{filename}}",failedUploadF3d:"上传 F3D 失败",f3dRemoved:"F3D 已移除",failedRemoveF3d:"移除 F3D 失败",timelapseAttached:"延时摄影已附加：{{filename}}",timelapseAlreadyAttached:"延时摄影已附加",noMatchingTimelapse:"未找到匹配的延时摄影",failedScanTimelapse:"扫描延时摄影失败",failedAttachTimelapse:"附加延时摄影失败",timelapseRemoved:"延时摄影已移除",failedRemoveTimelapse:"移除延时摄影失败",timelapseUploaded:"延时摄影已上传：{{filename}}",failedUploadTimelapse:"上传延时摄影失败",archiveDeleted:"归档已删除",failedDeleteArchive:"删除归档失败",addedToFavorites:"已添加到收藏",removedFromFavorites:"已从收藏中移除",projectUpdated:"项目已更新",failedUpdateProject:"更新项目失败",linkCopied:"链接已复制到剪贴板",failedCopyLink:"复制链接失败",photoDeleted:"照片已删除",failedDeletePhoto:"删除照片失败",failedDeleteArchives:"删除归档失败",failedUpdateFavorites:"更新收藏失败",exportDownloaded:"导出已下载",exportFailed:"导出失败"},menu:{print:"打印",schedule:"排程",openInBambuStudio:"在切片软件中打开",slice:"切片",externalLink:"外部链接",viewOnMakerWorld:"在 MakerWorld 上查看",preview3d:"3D 预览",viewTimelapse:"查看延时摄影",scanForTimelapse:"扫描延时摄影",uploadTimelapse:"上传延时摄影",removeTimelapse:"移除延时摄影",downloadSource3mf:"下载源 3MF",uploadSource3mf:"上传源 3MF",replaceSource3mf:"替换源 3MF",removeSource3mf:"移除源 3MF",uploadF3d:"上传 F3D",replaceF3d:"替换 F3D",downloadF3d:"下载 F3D",removeF3d:"移除 F3D",download:"下载",copyDownloadLink:"复制下载链接",qrCode:"二维码",viewPhotos:"查看照片",viewPhotosCount:"查看照片 ({{count}})",projectPage:"项目页面",addToFavorites:"添加到收藏",removeFromFavorites:"从收藏中移除",edit:"编辑",printLog:"打印记录",goToProject:"前往项目：{{name}}",addToProject:"添加到项目",removeFromProject:"从项目中移除",loading:"加载中...",noProjectsAvailable:"无可用项目",searchProjects:"搜索项目…",select:"选择",deselect:"取消选择",delete:"删除"},permission:{noReprint:"您没有重新打印此归档的权限",noAddToQueue:"您没有添加到队列的权限",noUpdateArchives:"您没有更新归档的权限",noUploadFiles:"您没有上传文件的权限",noDownload:"您没有下载归档的权限",noCopyLink:"您没有复制下载链接的权限",noDelete:"您没有删除此归档的权限",noCreate:"您没有创建归档的权限"},platePicker:{title:"选择要预览的打印板",hint:"此存档包含多个打印板。选择一个在 GCode 查看器中打开。",plateLabel:"打印板 {{index}}",objectCount:"{{count}} 个对象",objectCount_plural:"{{count}} 个对象",noGcode:"此存档没有可预览的已切片 G 代码。请先在 Bambu Studio 中打开并切片。"},card:{previousPlate:"上一个板",nextPlate:"下一个板",plateNumber:"板 {{index}}",moreOptions:"右键查看更多选项",addToFavorites:"添加到收藏",removeFromFavorites:"从收藏中移除",cancelled:"已取消",failed:"失败",duplicate:"重复",duplicateTitle:"此模型之前已打印过",openSource3mf:"在 Bambu Studio 中打开源 3MF（右键查看更多选项）",downloadF3d:"下载 Fusion 360 设计文件",viewTimelapse:"查看延时摄影",viewPhoto:"查看 1 张照片",viewPhotos:"查看 {{count}} 张照片",openFolder:"打开文件夹：{{name}}",slicedFile:"已切片文件 - 可以打印",sourceFile:"仅源文件 - 无 AMS 映射可用",gcode:"GCODE",source:"源文件",project:"项目：{{name}}",runsBadge:"{{count}} 次打印",runsBadgeTitle:"共 {{count}} 次打印 — 成功 {{successful}} 次，失败 {{failed}} 次。点击查看完整打印记录。",estimated:"预计：{{time}}",actual:"实际：{{time}}",accuracy:"准确度：{{percent}}%",filament:"{{weight}} 克",layer:"{{count}} 层",layers:"{{count}} 层",object:"{{count}} 个对象",objects:"{{count}} 个对象",slicedFor:"为 {{model}} 切片",uploadedBy:"上传者",noPermissionReprint:"您没有重新打印的权限",noFileForReprint:"无可用的 3MF 文件 — 打印记录时无法从打印机下载该文件",noPermissionEdit:"您没有编辑归档的权限",noPermissionDelete:"您没有删除归档的权限",reprint:"重新打印",schedulePrint:"排程打印",schedule:"排程",openInBambuStudio:"在切片软件中打开",openInBambuStudioToSlice:"在切片软件中打开进行切片",slice:"切片",externalLink:"外部链接",makerWorld:"MakerWorld：{{designer}}",viewProject:"查看项目",noExternalLink:"无外部链接",preview3d:"3D 预览",download:"下载",edit:"编辑",delete:"删除"},runLog:{title:"打印记录",modalTitle:"打印记录 — {{name}}",modalTitleFallback:"此归档",empty:"此归档尚未记录任何打印事件。",col:{date:"日期",status:"状态",duration:"时长",filament:"耗材",cost:"成本"},status:{completed:"已完成",failed:"失败",cancelled:"已取消",stopped:"已停止",skipped:"已跳过",printing:"打印中"}},modal:{deleteArchive:"删除归档",deleteConfirm:'确定要删除"{{name}}"吗？此操作无法撤销。',deleteButton:"删除",deletePurgeStats:"同时从快速统计中删除此打印（耗材、时间、成本、能耗）",removeSource3mf:"移除源 3MF",removeSource3mfConfirm:'确定要从"{{name}}"中移除源 3MF 文件吗？这将删除原始切片项目文件。',removeButton:"移除",removeF3d:"移除 F3D",removeF3dConfirm:'确定要从"{{name}}"中移除 Fusion 360 设计文件吗？',removeTimelapse:"移除延时摄影",removeTimelapseConfirm:'确定要从"{{name}}"中移除延时摄影视频吗？',timelapse:"{{name}} - 延时摄影",selectTimelapse:"选择延时摄影",selectTimelapseDesc:"未找到自动匹配。请选择此打印的延时摄影：",deleteArchives:"删除归档",deleteArchivesConfirm:"确定要删除 {{count}} 个归档吗？此操作无法撤销。",deleteCount:"删除 {{count}} 个"},page:{title:"归档",printsCount:"{{filtered}} / {{total}} 次打印",dropFilesHere:"将 .3mf 文件拖放到此处",releaseToUpload:"释放以上传",only3mfSupported:"仅支持 .3mf 文件",close:"关闭",selected:"已选择 {{count}} 个",selectAll:"全选",tags:"标签",project:"项目",favorite:"收藏",delete:"删除",toggledFavorites:"已切换 {{count}} 个归档的收藏状态",failedUpdateFavorites:"更新收藏失败",archivesDeleted:"已删除 {{count}} 个归档",failedDeleteArchives:"删除归档失败",photoDeleted:"照片已删除",failedDeletePhoto:"删除照片失败"},list:{name:"名称",printer:"打印机",date:"日期",size:"大小",actions:"操作",hasTimelapse:"有延时摄影"},log:{date:"日期",printName:"打印名称",printer:"打印机",user:"用户",status:"状态",duration:"时长",filament:"耗材",allPrinters:"所有打印机",allUsers:"所有用户",allStatuses:"所有状态",cancelled:"已取消",skipped:"已跳过",dateFrom:"从",dateTo:"到",noEntries:"未找到打印日志条目",showing:"显示 {{count}} / {{total}} 条",rowsPerPage:"行数",page:"页",prev:"上一页",next:"下一页",clearLog:"清除日志",clearLogTitle:"清除打印日志",clearLogConfirm:"所有打印日志条目将被永久删除。归档和队列项目不受影响。此操作无法撤销。确定要继续吗？",clearLogButton:"全部清除",cleared:"已清除 {{count}} 条日志",clearFailed:"清除打印日志失败"}},queue:{filamentShort:{rowBadge:"所分配料盘的耀丝不足",rowTooltip:"调度程序已标记该项。点击播放查看各插槽的赤字并决定是否仍要打印。",confirmTitle:"耀丝不足",confirmIntro:"所分配的料盘至少有一个插槽无法满足。仍要打印吗？",lineItem:"插槽 {{slot}}：需要 {{required}} g，剩余 {{remaining}} g",unknown:"未知",printAnyway:"仍要打印"},title:"打印队列",subtitle:"排程和管理您的打印任务",addToQueue:"添加到队列",print:"打印",reprint:"重新打印",schedulePrint:"排程打印",editQueueItem:"编辑队列项目",printToPrinters:"打印到 {{count}} 台打印机",queueToPrinters:"排队到 {{count}} 台打印机",queueSelectedPlates:"将 {{count}} 个热床加入队列",selectAllPlates:"选择全部 {{count}} 个热床",deselectAll:"取消全选",printQueued:"已加入打印队列",itemsQueued:"{{count}} 个任务已加入队列",sending:"发送中...",sendingProgress:"发送中 {{current}}/{{total}}...",adding:"添加中...",addingProgress:"添加中 {{current}}/{{total}}...",savingProgress:"保存中 {{current}}/{{total}}...",clearQueue:"清空队列",clearHistory:"清除历史",emptyQueue:"队列为空",position:"位置",scheduledTime:"排程时间",moveUp:"上移",moveDown:"下移",startNow:"立即开始",printingInProgress:"打印进行中...",viewArchive:"查看归档",viewInFileManager:"在文件管理器中查看",itemCount:"{{count}} 个项目",itemCount_plural:"{{count}} 个项目",dragToReorder:"拖动以重新排序（仅限尽快）",reorderHint:'位置仅影响"尽快"项目。排程项目按设定时间运行。',sjf:{label:"SJF",tooltip:"最短任务优先 — 调度器优先处理较短的打印任务"},addedBy:"由 {{name}} 添加",nextInQueue:"队列中的下一个",clearPlateSuccess:"打印板已清理 — 准备进行下一个打印",plateNumber:"板 {{index}}",quantity:"数量",quantityHint:"创建 {{count}} 个队列项目",activeBatches:"活跃批次",batchProgress:"已完成 {{completed}}/{{total}}",cancelBatch:"取消剩余",batchCancelled:"已取消剩余批次项目",cancelBatchConfirmTitle:"取消批次",cancelBatchConfirmMessage:"取消此批次中所有剩余的待处理项目？",batch:"批次",sections:{currentlyPrinting:"正在打印",queued:"排队中",history:"历史"},status:{pending:"等待中",waiting:"等待中",printing:"打印中",paused:"已暂停",completed:"已完成",failed:"失败",skipped:"已跳过",cancelled:"已取消"},summary:{printing:"打印中",queued:"排队中",totalTime:"总队列时间",totalWeight:"总队列重量",history:"历史"},filter:{allPrinters:"所有打印机",unassigned:"未分配",allStatus:"所有状态",allLocations:"所有位置",any:"任意"},sort:{byPosition:"按位置排序",byName:"按名称排序",byPrinter:"按打印机排序",bySchedule:"按排程排序",byDate:"按日期排序",ascendingOldest:"升序（最旧优先）",descendingNewest:"降序（最新优先）"},badges:{staged:"已暂存",requiresPrevious:"需要前一个成功",autoPowerOff:"自动关机",gcodeInjection:"G-code"},empty:{title:"没有排程的打印",description:'从归档页面使用右键菜单中的"排程"选项来排程打印，或拖放文件开始。'},time:{asap:"尽快",overdue:"已逾期",now:"现在",lessThanMinute:"不到一分钟",inMinutes:"{{count}} 分钟后",inHours:"{{count}} 小时后"},actions:{stopPrint:"停止打印",startPrint:"开始打印",requeue:"重新排队"},bulkEdit:{title:"编辑 {{count}} 个项目",title_plural:"编辑 {{count}} 个项目",description:"仅更改的设置将应用于所选项目。",printer:"打印机",noChange:"— 不更改 —",queueOptions:"队列选项",staged:"暂存（手动开始）",autoPowerOff:"打印后自动关机",requirePrevious:"要求前一个成功",printOptions:"打印选项",bedLevelling:"热床调平",flowCalibration:"流量校准",vibrationCalibration:"振动校准",layerInspection:"首层检查",timelapse:"延时摄影",useAms:"使用 AMS",applyChanges:"应用更改",selectAll:"全选",deselectAll:"取消全选",selected:"已选择 {{count}} 个",editSelected:"编辑所选",cancelSelected:"取消所选"},confirm:{cancelTitle:"取消排程打印",cancelMessage:'确定要取消"{{name}}"吗？',stopTitle:"停止打印",stopMessage:'确定要停止当前打印"{{name}}"吗？这将取消打印机上的打印任务。',removeTitle:"从历史中移除",removeMessage:'确定要从队列历史中移除"{{name}}"吗？',clearHistoryTitle:"清除历史",clearHistoryMessage:"确定要从历史中移除所有 {{count}} 个项目吗？",cancelButton:"取消打印",stopButton:"停止打印",thisPrint:"此打印",thisItem:"此项目"},toast:{cancelled:"队列项目已取消",cancelFailed:"取消项目失败",removed:"队列项目已移除",removeFailed:"移除项目失败",stopped:"打印已停止",stopFailed:"停止打印失败",released:"打印已释放到队列",startFailed:"开始打印失败",reorderFailed:"重新排序队列失败",historyCleared:"已清除 {{count}} 条历史记录",clearHistoryFailed:"清除历史失败",updateFailed:"更新项目失败",bulkCancelled:"已取消 {{count}} 个项目",bulkCancelFailed:"批量取消项目失败"},timeline:{listView:"列表",timelineView:"时间线",unassigned:"未分配",noData:"当天没有计划的打印任务",allDoneBy:"所有打印预计在 {{time}} 前完成",staged:"暂存",filterAll:"全部显示",filterPrinting:"打印中",filterQueued:"排队中",time:{anyMoment:"即将完成",minutesLeft:"剩余{{minutes}}分钟",hoursLeft:"剩余{{hours}}小时",hoursMinutesLeft:"剩余{{hours}}小时{{minutes}}分钟"},day:{previous:"前一天",next:"后一天",today:"今天"}},permissions:{noStopPrint:"您没有停止打印的权限",noStartPrint:"您没有开始打印的权限",noEdit:"您没有编辑此队列项目的权限",noCancel:"您没有取消此队列项目的权限",noRequeue:"您没有重新排队的权限",noRemove:"您没有移除此队列项目的权限",noClearHistory:"您没有清除所有历史的权限",noEditItems:"您没有编辑队列项目的权限",noCancelItems:"您没有取消队列项目的权限"}},backgroundDispatch:{unknownFile:"未知文件",unknownPrinter:"未知打印机",startingPrints:"正在开始打印",progressSummary:"{{complete}}/{{total}} 完成 • 已分发：{{dispatched}} • 处理中：{{processing}}",expandDetails:"展开分发详情",collapseDetails:"收起分发详情",dismissToast:"关闭分发通知",cancelDispatchJob:"取消分发任务",cancel:"取消",cancelling:"取消中…",awaitingPrinter:"等待打印机…",status:{dispatched:"已分发",processing:"处理中",completed:"已完成",failed:"失败",cancelled:"已取消"},toast:{cancellingUpload:"取消上传中...",cancelled:"分发已取消",cancelFailed:"取消分发失败",completeWithFailures:"后台分发完成：{{completed}} 成功，{{failed}} 失败",completeSuccess:"后台分发完成：{{completed}} 成功",printStartedRemaining:"{{completed}} 个打印已开始，{{remaining}} 个正在发送..."}},stats:{title:"统计",subtitle:"拖动小部件以重新排列。点击眼睛图标隐藏。",overview:"概览",totalPrints:"总打印次数",successRate:"成功率",totalPrintTime:"总打印时间",printTime:"打印时间",totalFilament:"总耗材用量",filamentUsed:"耗材用量",filamentCost:"耗材成本",totalCost:"总成本",energyUsed:"能耗",energyCost:"能源成本",energyWarmingUpTooltip:"能耗追踪正在收集每小时快照。当所选范围之前至少存在一个快照时，时间段合计将变得准确。早期数值可能偏低。",averagePrintTime:"平均打印时间",printsPerDay:"每日打印次数",byPrinter:"按打印机",printsByPrinter:"各打印机打印次数",byMaterial:"按材料",byMonth:"按月份",last7Days:"最近 7 天",last30Days:"最近 30 天",last90Days:"最近 90 天",allTime:"全部时间",quickStats:"快速统计",printActivity:"打印活动",filamentTypes:"耗材类型",filamentTrends:"耗材趋势",failureAnalysis:"失败分析",timeAccuracy:"时间准确度",successful:"成功：",failed:"失败：",cancelled:"已取消：",perfectEstimate:"100% = 完美估计",noTimeAccuracyData:"暂无时间准确度数据",noFilamentData:"暂无耗材数据",noPrinterData:"暂无打印机数据",noPrintData:"暂无打印数据",noPrintDataLast30Days:"最近 30 天无打印数据",failureReasons:"失败原因",topFailureReasons:"主要失败原因",failedPrintsCount:"{{failed}} / {{total}} 次打印失败",lastWeekRate:"上周：{{rate}}%",resetLayout:"重置布局",recalculateCosts:"重新计算成本",recalculateCostsHint:"使用当前耗材价格重新计算所有归档成本",exportStats:"导出统计",exportAsCsv:"导出为 CSV",exportAsExcel:"导出为 Excel",hiddenCount:"{{count}} 个已隐藏",exportDownloaded:"导出已下载",exportFailed:"导出失败",layoutReset:"布局已重置",recalculatedCosts:"已为 {{count}} 个归档重新计算成本",recalculateFailed:"重新计算成本失败",loadingStats:"加载统计数据中...",noPermissionResetLayout:"您没有重置布局的权限",noPermissionRecalculate:"您没有重新计算成本的权限",noPrintDataInRange:"所选范围内无打印数据",periodFilament:"期间耗材",periodCost:"期间成本",avgPerPrint:"每次打印平均",usageOverTime:"随时间的使用量",filamentByWeight:"重量",printDuration:"打印时长",printerUtilization:"打印机利用率",filamentSuccess:"按材料成功率",printHabits:"打印习惯",printTimeOfDay:"打印时段",colorDistribution:"颜色分布",noColorData:"暂无颜色数据",records:"记录",longestPrint:"最长打印",heaviestPrint:"最重打印",mostExpensivePrint:"最贵打印",busiestDay:"最忙碌的一天",successStreak:"连续成功",streakPrint:"连续打印",streakPrints:"{{count}} 次连续打印",printerStats:"打印机统计",hours:"小时",avgPrints:"平均打印",noArchiveData:"暂无打印数据",filamentByTime:"时间",avgWeight:"平均重量",avgTime:"平均时间",filamentByPrints:"打印次数",timeframe:{today:"今天","this-week":"本周","this-month":"本月","last-7":"最近 7 天","last-30":"最近 30 天","last-90":"最近 90 天","this-year":"今年","all-time":"全部时间",custom:"自定义范围",from:"从",to:"到"},allUsers:"所有用户",noUser:"无用户（系统）",filterByUser:"按用户筛选"},maintenance:{title:"维护",overview:"概览",allOk:"所有维护均已完成",dueCount:"{{count}} 项到期",dueCount_plural:"{{count}} 项到期",warningCount:"{{count}} 个警告",warningCount_plural:"{{count}} 个警告",totalPrintTime:"总打印时间",nextMaintenance:"下次维护",nothingDue:"无到期项目",tasks:"任务",lastPerformed:"上次执行",interval:"间隔",hoursRemaining:"剩余 {{hours}} 小时",hoursOverdue:"逾期 {{hours}} 小时",markDone:"标记为完成",performMaintenance:"执行维护",history:"历史",noHistory:"无维护历史",editPrintHours:"编辑打印时间",currentHours:"当前小时数",statusTab:"状态",settingsTab:"设置",overdueCount:"{{count}} 个逾期",dueSoonCount:"{{count}} 个即将到期",dueSoon:"即将到期",allGood:"一切正常",overdueBy:"逾期 {{duration}}",dueIn:"{{duration}} 后到期",timeLeft:"剩余 {{duration}}",day:"1 天",days:"{{count}} 天",week:"1 周",weeks:"{{count}} 周",month:"1 个月",months:"{{count}} 个月",year:"1 年",maintenanceTypes:"维护类型",maintenanceTypesDescription:"系统类型和您的自定义维护任务",addCustomType:"添加自定义类型",restoreDefaults:"恢复默认任务",intervalType:"间隔类型",intervalValue:"间隔 ({{type}})",icon:"图标",documentationLink:"文档链接（可选）",assignToPrinters:"分配给打印机",selectAtLeastOnePrinter:"至少选择一台打印机",addType:"添加类型",custom:"自定义",printHours:"打印小时数",calendarDays:"日历天数",exampleName:"例如：更换 HEPA 过滤器",viewDocumentation:"查看文档",timeBasedInterval:"基于时间的间隔",intervalOverrides:"间隔覆盖",intervalOverridesDescription:"为特定打印机自定义间隔",assignedToPrinters:"已分配给打印机：",noPrintersAssigned:"未分配打印机",addPrinterShort:"添加：",printersAssignedClick:"已分配 {{count}} 台打印机 - 点击管理",removeFromPrinter:"从此打印机移除",types:{lubricateCarbonRods:"润滑碳纤维杆",lubricateRails:"润滑线性导轨",cleanNozzle:"清洁喷嘴/热端",checkBelts:"检查皮带张力",cleanBuildPlate:"清洁构建板",checkExtruder:"检查挤出机齿轮",checkCooling:"检查冷却风扇",generalInspection:"综合检查",cleanCarbonRods:"清洁碳纤维杆",lubricateSteelRods:"润滑钢杆",cleanSteelRods:"清洁钢杆",cleanLinearRails:"清洁线性导轨",checkPtfeTube:"检查 PTFE 管",replaceHepaFilter:"更换 HEPA 过滤器",replaceCarbonFilter:"更换活性炭过滤器",lubricateLeftNozzleRail:"润滑左喷嘴导轨"},maintenanceComplete:"维护已标记为完成",typeUpdated:"维护类型已更新",typeDeleted:"维护类型已删除",defaultsRestored:"已恢复 {{count}} 个默认任务",printHoursUpdated:"打印小时数已更新",printerAssigned:"打印机已分配",printerRemoved:"打印机已移除",deleteTypeConfirm:'删除"{{name}}"？',deleteSystemTypeTitle:"删除默认维护任务？",deleteSystemTypeMessage:'确定要删除默认维护任务"{{name}}"吗？',noPermissionUpdate:"您没有更新维护项目的权限",noPermissionPerform:"您没有执行维护的权限",noPermissionEditTypes:"您没有编辑维护类型的权限",noPermissionDeleteTypes:"您没有删除维护类型的权限",noPermissionEditHours:"您没有编辑打印时间的权限",noPermissionRemovePrinter:"您没有移除打印机分配的权限",noPermissionAssignPrinter:"您没有分配打印机的权限",noPermissionEditIntervals:"您没有编辑间隔的权限",configureSettings:"配置维护类型和间隔"},settings:{title:"设置",general:"通用",tabs:{general:"通用",smartPlugs:"智能插座",notifications:"通知",queue:"工作流",filament:"耗材",network:"网络",apiKeys:"API 密钥",virtualPrinter:"虚拟打印机",spoolbuddy:"SpoolBuddy",failureDetection:"故障检测",users:"身份验证",backup:"备份",emailAuth:"邮箱认证",ldap:"LDAP",twoFa:"双因素认证",oidc:"SSO / OIDC",security:"安全"},spoolbuddy:{infoTitle:"SpoolBuddy 设备",infoBody:"SpoolBuddy kiosk 通过心跳自动注册。如果设备不再使用，或守护进程崩溃遗留了陈旧的重复项，可在此注销。",duplicatesTitle:"已注册 {{count}} 台设备",duplicatesBody:"kiosk 界面只使用最先注册的设备。如果其中有因崩溃遗留的陈旧重复项，请注销它——在线设备会在下次心跳时重新注册自己。",empty:"尚未注册任何 SpoolBuddy 设备。",online:"在线",offline:"离线",unregister:"注销",unregisterSuccess:"设备已注销",unregisterError:"注销设备失败",confirmTitle:"注销 SpoolBuddy 设备？",confirmBody:'将从数据库中移除 "{{hostname}}" ({{deviceId}})。如果设备在线，会在下次心跳时重新注册自己。',ipAddress:"IP 地址",firmware:"固件",lastSeen:"上次在线",daemonUptime:"守护进程运行时间",systemUptime:"系统运行时间",never:"从未",nfc:"NFC",scale:"秤",cpuTemp:"CPU 温度",cpuLoad:"CPU 负载",memory:"内存",disk:"磁盘",update:"更新",updateConfirmTitle:"更新 SpoolBuddy 守护进程？",updateConfirmBody:'对 "{{hostname}}" 触发软件更新？更新完成后守护进程将重启。',restartBrowser:"重启浏览器",restartBrowserConfirmTitle:"重启 kiosk 浏览器？",restartBrowserConfirmBody:'在 "{{hostname}}" 上重启 kiosk 浏览器？显示将短暂黑屏。',restartDaemon:"重启守护进程",restartDaemonConfirmTitle:"重启 SpoolBuddy 守护进程？",restartDaemonConfirmBody:'在 "{{hostname}}" 上重启 SpoolBuddy 守护进程？设备将离线几秒钟。',reboot:"重启",rebootConfirmTitle:"重启设备？",rebootConfirmBody:'重启 "{{hostname}}"？设备将离线约一分钟。',shutdown:"关机",shutdownConfirmTitle:"关闭设备？",shutdownConfirmBody:'关闭 "{{hostname}}"？您需要物理访问才能重新开机。',commandConfirm:"确认",commandQueued:"命令已加入队列",commandError:"发送命令失败"},ldap:{title:"LDAP 认证",enabledDesc:"LDAP 认证已启用",disabledDesc:"LDAP 认证已禁用",disabledHint:"在下方配置并保存 LDAP 设置，然后启用。",enabled:"LDAP 认证已启用",disabled:"LDAP 认证已禁用",feature1:"用户可以使用 LDAP 凭据登录",feature2:"本地管理员帐户作为后备保留",feature3:"登录时 LDAP 组映射到 BamBuddy 组",serverConfig:"LDAP 服务器配置",serverUrl:"服务器 URL",serverUrlHint:"使用 ldap:// 进行标准连接或 ldaps:// 进行 SSL 连接",security:"安全",securityHint:"StartTLS 将普通连接升级为 TLS。LDAPS 从一开始就使用 TLS。",bindDn:"绑定 DN（服务帐户）",bindPassword:"绑定密码",searchBase:"搜索基础 DN",userFilter:"用户搜索过滤器",userFilterHint:"{username} 替换为登录用户名。OpenLDAP 使用 (uid={username})。",advanced:"高级",autoProvision:"自动创建用户",autoProvisionHint:"首次 LDAP 登录时自动创建 BamBuddy 帐户",defaultGroup:"默认组",defaultGroupNone:"— 无（无回退）—",defaultGroupHint:"当 LDAP 用户通过身份验证但不在任何已映射的 LDAP 组中时分配的回退组。留空以使未映射的用户没有权限。",groupMapping:"组映射（JSON）",groupMappingHint:"将 LDAP 组 DN 映射到 BamBuddy 组。可用组：",testConnection:"测试连接",settingsSaved:"LDAP 设置已保存",errors:{serverRequired:"LDAP 服务器 URL 为必填项",searchBaseRequired:"搜索基础 DN 为必填项",enableAuthFirst:"请先启用认证",configureLdapFirst:"请先保存 LDAP 设置"}},email:{smtpSettings:"SMTP 配置",smtpHost:"SMTP 服务器",smtpPort:"SMTP 端口",security:"安全",authentication:"认证",username:"用户名",password:"密码",fromEmail:"发件邮箱",fromName:"发件人名称",testConnection:"测试 SMTP 连接",testRecipient:"测试收件邮箱",sendTest:"发送测试邮件",sending:"发送中...",save:"保存设置",saving:"保存中...",advancedAuth:"高级认证",advancedAuthEnabled:"高级认证已启用",advancedAuthEnabledDesc:"基于邮箱的用户管理功能已激活。新用户将通过邮件收到自动生成的密码，用户可以通过忘记密码功能重置密码。",advancedAuthDisabled:"高级认证已禁用",advancedAuthDisabledDesc:"启用高级认证以激活基于邮箱的用户管理功能。",enable:"启用",disable:"禁用",feature1:"密码自动生成并通过邮件发送给新用户",feature2:"用户可以使用用户名或邮箱登录",feature3:"忘记密码功能可用",feature4:"管理员可以通过邮件重置用户密码",errors:{requiredFields:"请填写所有必填字段",usernameRequired:"启用认证时需要用户名",enterTestEmail:"请输入测试邮箱地址",smtpServerAndEmail:"测试前请填写 SMTP 服务器和发件邮箱",usernamePasswordRequired:"启用认证时需要用户名和密码",configureSmtpFirst:"请先配置并测试 SMTP 设置",enableAuthFirst:"请先启用身份验证才能使用基于电子邮件的功能。"},success:{settingsSaved:"SMTP 设置保存成功"},securityOptions:{starttls:"STARTTLS（端口 587）",ssl:"SSL/TLS（端口 465）",none:"无（端口 25）"},authOptions:{enabled:"已启用",disabled:"已禁用"}},appearance:"外观",notifications:"通知",smartPlugs:"智能插座",spoolman:"Spoolman",updates:"更新",language:"语言",languageDescription:"选择您的首选语言",theme:"主题",themeLight:"浅色",themeDark:"深色",themeSystem:"跟随系统",defaultView:"默认视图",defaultViewDescription:"打开应用时显示的页面",checkForUpdates:"检查更新",autoUpdate:"自动更新",currentVersion:"当前版本",latestVersion:"最新版本",upToDate:"已是最新版本",updateAvailable:"有可用更新",notificationLanguage:"通知语言",notificationLanguageDescription:"推送通知的语言",bedCooledThreshold:"热床冷却阈值",bedCooledThresholdDescription:"打印后热床被视为已冷却的温度",userNotificationsEnabled:"用户通知",userNotificationsEnabledDescription:"启用用户通知菜单和打印任务事件的邮件通知。需要高级身份验证。",userNotificationsDisabledHint:"请启用高级身份验证以使用用户通知。",notificationProviders:"通知提供商",addProvider:"添加提供商",editProvider:"编辑提供商",providerType:"提供商类型",testNotification:"测试通知",testSuccess:"测试通知发送成功",testFailed:"发送测试通知失败",quietHours:"免打扰时间",quietHoursDescription:"在此时间段内不发送通知",quietHoursStart:"开始",quietHoursEnd:"结束",events:{title:"通知事件",printStart:"打印开始",printComplete:"打印完成",printFailed:"打印失败",printStopped:"打印停止",printProgress:"进度里程碑",printProgressDescription:"在 25%、50%、75% 时通知",printerOffline:"打印机离线",printerError:"打印机错误",filamentLow:"耗材不足",maintenanceDue:"维护到期",maintenanceDueDescription:"需要维护时通知"},smartPlug:{title:"智能插座",add:"添加智能插座",edit:"编辑智能插座",name:"名称",ipAddress:"IP 地址",linkedPrinter:"关联打印机",autoOn:"自动开启",autoOnDescription:"打印开始时开启",autoOff:"自动关闭",autoOffDescription:"打印完成后关闭",offDelay:"关闭延迟",offDelayMinutes:"打印后分钟数",offDelayTemp:"当喷嘴温度低于",currentState:"当前状态",turnOn:"开启",turnOff:"关闭"},filamentTracking:"耗材追踪",filamentTrackingDesc:"选择如何追踪您的耗材。您可以使用内置库存或连接外部 Spoolman 服务器。",filamentChecks:"耗材检查",disableFilamentWarnings:"禁用耗材警告",disableFilamentWarningsDesc:"在打印或加入队列时不显示耗材不足警告",preferLowestFilament:"优先使用剩余最少的耗材",preferLowestFilamentDesc:"当多个料盘匹配时，使用剩余耗材最少的那个",trackingModeBuiltIn:"内置库存",trackingModeBuiltInDesc:"包含 RFID 自动匹配和用量追踪",trackingModeSpoolmanDesc:"外部耗材管理服务器",builtInFeatureRfid:"自动检测 AMS 中的拓竹 RFID 耗材",builtInFeatureUsage:"追踪每次打印的耗材消耗",builtInFeatureCatalog:"管理耗材、颜色和 K 值配置文件",builtInFeatureThirdParty:"第三方耗材可分配到库存耗材",amsSyncButton:"从 AMS 同步重量",amsSyncTitle:"从 AMS 同步耗材重量",amsSyncMessage:"这将使用已连接打印机的当前 AMS 剩余百分比值覆盖所有库存耗材重量。用于从损坏的重量数据中恢复。打印机必须在线。",amsSyncing:"同步中...",amsSyncSuccess:"已同步 {{synced}} 个耗材，跳过 {{skipped}} 个",amsSyncError:"从 AMS 同步重量失败",spoolmanAmsSyncButton:"从 AMS 同步 Spoolman 重量",spoolmanAmsSyncTitle:"从 AMS 同步 Spoolman 耗材重量",spoolmanAmsSyncMessage:"这将根据已连接打印机的当前 AMS 剩余百分比值更新所有 Spoolman 耗材重量。打印机必须在线。",spoolmanAmsSyncing:"同步中...",spoolmanAmsSyncSuccess:"已同步 {{synced}} 个 Spoolman 耗材，跳过 {{skipped}} 个",spoolmanAmsSyncError:"从 AMS 同步 Spoolman 重量失败",spoolmanAmsSyncErrorUnreachable:"同步失败（Spoolman 不可访问）",spoolmanAmsSyncErrorNotConfigured:"同步失败（Spoolman 未配置）",spoolmanNotConfigured:"Spoolman 未配置",spoolmanFilamentCatalogTitle:"Spoolman 耗材目录",spoolmanFilamentCatalogDesc:"来自 Spoolman 的耗材名称和皮重。名称和线轴重量可在此处编辑；其他属性请直接在 Spoolman 中管理。",spoolmanUrl:"Spoolman URL",spoolmanUrlHint:"Spoolman 服务器的 URL（例如 http://localhost:7912）",spoolmanConnected:"已连接",spoolmanDisconnected:"未连接",status:"状态",connect:"连接",disconnect:"断开",howSyncWorks:"同步工作原理",syncInfoRfidOnly:"仅同步带有 RFID 的官方拓竹耗材",syncInfoAutoCreate:"首次同步时自动在 Spoolman 中创建新耗材",syncInfoThirdPartySkipped:"非拓竹耗材（第三方、重新填充的）将被跳过",linkingExistingSpools:"链接现有耗材",linkingExistingSpoolsDesc:'要将现有的 Spoolman 耗材链接到您的 AMS，请将鼠标悬停在 AMS 槽位上并点击"链接到 Spoolman"。',syncMode:"同步模式",syncModeAuto:"自动",syncModeManual:"仅手动",syncModeAutoDesc:"检测到更改时自动同步 AMS 数据",syncModeManualDesc:"仅在手动触发时同步",syncAmsData:"同步 AMS 数据",syncAmsDataDesc:"手动将打印机 AMS 数据同步到 Spoolman",allPrinters:"所有打印机",noDefaultPrinter:"无默认（每次询问）",sidebarOrder:"侧边栏顺序",saveThumbnails:"保存缩略图",captureFinishPhoto:"拍摄完成照片",noPrintersConfigured:"未配置打印机",archiveMode:{always:"始终创建归档条目",never:"从不创建归档条目",ask:"每次询问"},checkForUpdatesLabel:"检查更新",checkPrinterFirmware:"检查打印机固件",includeBetaUpdates:"包含测试版本",includeBetaUpdatesDesc:"检查更新时通知测试版和预发布版本",enableRetry:"启用重试",homeAssistantDescription:"通过 Home Assistant 控制智能插座",environmentManagedLabel:"（环境变量管理）",autoEnabledViaEnv:"通过环境变量自动启用",urlFromEnvReadOnly:"值由 HA_URL 环境变量设置（只读）",tokenFromEnvReadOnly:"值由 HA_TOKEN 环境变量设置（只读）",mqttConnectedTo:"已连接到",prometheusDescription:"以 Prometheus 格式暴露打印机数据",noSmartPlugsTitle:"未配置智能插座",noSmartPlugsDescription:"添加基于 Tasmota 的智能插座以追踪能耗并自动化电源控制。",noProvidersTitle:"未配置提供商",noProvidersDescription:"添加提供商以接收警报。",noTemplatesAvailable:"无可用模板。重启后端以加载默认模板。",apiPermissionView:"查看打印机状态和队列",apiPermissionEdit:"添加和移除打印队列中的项目",apiKeysEmptyTitle:"无 API 密钥",apiKeysEmptyDescription:"创建 API 密钥以与外部服务集成。",noUsersFound:"未找到用户",noGroupsFound:"未找到组",noGroupsAvailable:"无可用组",passwordsDoNotMatch:"密码不匹配",systemGroupWarning:"系统组名称不可更改",authDisabledTitle:"身份验证已禁用",authDisabledFeature1:"需要登录才能访问系统",authDisabledFeature2:"创建多个用户并基于组的权限管理",authDisabledFeature3:"使用 50+ 个细粒度权限控制访问",userHasCreated:"此用户已创建：",userItemsQuestion:"您想如何处理这些项目？",deleteUserConfirm:"确定要删除此用户吗？",actionCannotBeUndone:"此操作无法撤销。",addFirstSmartPlug:"添加您的第一个智能插座",providers:"提供商",log:"日志",testAll:"全部测试",testResults:"测试结果",testPassedCount:"{{count}} 个通过",testFailedCount:"{{count}} 个失败",messageTemplates:"消息模板",messageTemplatesDescription:"自定义每个事件的通知消息。",apiKeys:"API 密钥",apiKeysDescription:"创建 API 密钥用于外部集成和 Webhook。",createKey:"创建密钥",apiKeyCreated:"API 密钥创建成功",apiKeyCopyWarning:"请立即复制此密钥 - 它不会再次显示！",useInApiBrowser:"在 API 浏览器中使用",createNewApiKey:"创建新 API 密钥",keyName:"密钥名称",keyNamePlaceholder:"例如：Home Assistant、OctoPrint",readStatus:"读取状态",readStatusDescription:"查看打印机状态和队列",manageQueue:"管理队列",manageQueueDescription:"添加和移除打印队列中的项目",controlPrinter:"控制打印机",controlPrinterDescription:"暂停、继续和停止打印",manageLibrary:"管理资料库",manageLibraryDescription:"上传、重命名和删除资料库文件；从 MakerWorld 导入模型",manageInventory:"管理库存",manageInventoryDescription:"创建、更新和删除耗材盘以及库存记录。SpoolBuddy 终端（NFC 扫描、秤读取、终端系统命令）需要此权限。",libraryBadge:"资料库",inventoryBadge:"库存",cloudAccess:"允许云端访问",cloudAccessDescription:"代表您读取 Bambu Cloud 预设和耗材。需要登录 Bambu Cloud。",cloudBadge:"云端",updateEnergyCost:"更新电价",updateEnergyCostDescription:"允许此密钥向 /settings/electricity-price POST 新的每千瓦时电价。适用于 Home Assistant 动态电价自动化（Tibber、Octopus 等）。这是唯一可通过 API 密钥写入的设置字段。",energyCostBadge:"能耗",legacyKey:"传统",legacyKeyTooltip:"在按用户所有权之前创建；需重建以使用云端访问",unnamedKey:"未命名密钥",lastUsed:"上次使用",read:"读取",control:"控制",createFirstKey:"创建您的第一个密钥",webhookEndpoints:"Webhook 端点",webhookApiKeyHint:"在 X-API-Key 请求头中使用您的 API 密钥。",webhook:{getAllStatus:"获取所有打印机状态",getSpecificStatus:"获取特定打印机状态",addToQueue:"添加到打印队列",pausePrint:"暂停打印",resumePrint:"继续打印",stopPrint:"停止打印"},apiBrowser:"API 浏览器",apiBrowserDescription:"浏览和测试所有可用的 API 端点。",apiKeyForTesting:"测试用 API 密钥",apiKeyPlaceholder:"在此粘贴您的 API 密钥以测试需要认证的端点...",apiKeyHint:"此密钥将作为 X-API-Key 请求头随请求发送。",deleteApiKeyTitle:"删除 API 密钥",deleteApiKeyMessage:"确定要删除此 API 密钥吗？使用此密钥的所有集成将停止工作。",deleteKey:"删除密钥",amsDisplayThresholds:"AMS 显示阈值",amsThresholdsDescription:"配置 AMS 湿度和温度指示器的颜色阈值。",humidity:"湿度",goodGreen:"良好（绿色）",fairOrange:"一般（橙色）",aboveFairBad:"超过一般阈值显示为红色（差）",fairAlsoDryingThreshold:"此阈值也用于触发自动干燥",temperature:"温度",goodBlue:"良好（蓝色）",aboveFairHot:"超过一般阈值显示为红色（热）",historyRetention:"历史保留",keepSensorHistory:"保留传感器历史",historyRetentionDescription:"较旧的湿度和温度数据将被自动删除",defaultPrintOptions:"默认打印选项",defaultPrintOptionsDescription:"设置新打印的默认选项值。可在打印对话框中逐次覆盖。",defaultBedLevelling:"热床调平",defaultBedLevellingDesc:"打印前自动调平热床",defaultFlowCali:"流量校准",defaultFlowCaliDesc:"校准挤出流量",defaultVibrationCali:"振动校准",defaultVibrationCaliDesc:"减少振纹伪影",defaultLayerInspect:"首层检测",defaultLayerInspectDesc:"AI首层检测",defaultTimelapse:"延时摄影",defaultTimelapseDesc:"录制延时摄影视频",staggeredStart:"错峰启动",staggeredStartDescription:"错峰启动多台打印机批次时的默认组大小和间隔。可在打印对话框中按批次覆盖。",plateClear:"热床清空确认",requirePlateClear:"需要热床清空确认",requirePlateClearDescription:"启用后，调度器会在已完成打印的打印机上启动排队打印之前，等待每台打印机的热床清空确认。禁用后，也会隐藏打印机卡片上的打印板状态标记和“将打印板标记为已清理”按钮。",gcodeInjection:"G-code注入",gcodeInjectionDescription:'为Farmloop、SwapMod、AutoClear和Printflow 3D等自动打印系统配置自定义G-code，在打印开始和/或结束时注入。代码片段按打印机型号配置，在队列项目上启用"注入G-code"时应用。',gcodeInjectionNoPrinters:"未找到打印机。添加打印机以配置G-code代码片段。",gcodeStartLabel:"开始G-code",gcodeEndLabel:"结束G-code",gcodeStartPlaceholder:"在打印开始前插入的G-code...",gcodeEndPlaceholder:"在打印结束后追加的G-code...",staggerGroupSize:"组大小",staggerGroupSizeHelp:"每组同时启动的打印机数量",staggerInterval:"间隔（分钟）",staggerIntervalHelp:"每组启动之间的延迟",queueDrying:"自动干燥",queueDryingDescription:"在队列打印之间，打印机空闲时自动干燥AMS耗材。使用上方的湿度阈值触发干燥。",queueDryingEnabled:"启用自动干燥",queueDryingEnabledDescription:"当打印机空闲且湿度超过阈值时，自动启动AMS干燥",queueDryingBlock:"等待干燥完成",queueDryingBlockDescription:"阻止打印队列直到干燥完成。关闭时，打印优先于干燥。",ambientDryingEnabled:"环境干燥",ambientDryingEnabledDescription:"当空闲打印机的湿度超过阈值时自动干燥耗材，无需排队打印。",dryingPresets:"干燥预设",dryingPresetsDescription:"每种耗材类型的温度和时长。AMS 2 Pro使用较低温度，AMS-HT支持较高温度。",dryingFilament:"耗材",printModal:"打印对话框",expandCustomMapping:"默认展开自定义映射",expandCustomMappingDescription:"打印到多台打印机时，默认展开显示每台打印机的 AMS 映射",authentication:"身份验证",authEnabledDescription:"您的实例已通过用户身份验证保护",authDisabledDescription:"启用以要求登录并管理用户访问",authDisabledMessage:"启用身份验证以创建用户账户、管理权限并保护您的 Bambuddy 实例。",enableAuthentication:"启用身份验证",currentUser:"当前用户",changePassword:"修改密码",admin:"管理员",users:"用户",addUser:"添加用户",groups:"组",addGroup:"添加组",system:"系统",noDescription:"无描述",userCount:"{{count}} 个用户",permissionCount:"{{count}} 个权限",createUser:"创建用户",username:"用户名",enterUsername:"输入用户名",password:"密码",enterPassword:"输入密码",passwordRequirements:"至少 8 个字符，包含一个大写、一个小写、一个数字和一个特殊字符。",confirmPassword:"确认密码",confirmPasswordPlaceholder:"确认密码",viewReleaseOnGitHub:"在 GitHub 上查看发布",turnAllPlugsOn:"开启所有插座",turnAllPlugsOff:"关闭所有插座",clearNotificationLogs:"清除通知日志",clearLogsMessage:"这将永久删除所有 30 天前的通知日志。此操作无法撤销。",clearLogs:"清除日志",resetUiPreferences:"重置 UI 偏好",resetUiPreferencesMessage:"这将重置所有 UI 偏好为默认值：侧边栏顺序、主题、仪表板布局、视图模式和排序偏好。您的打印机、归档和服务器设置不会受到影响。清除后页面将重新加载。",resetPreferences:"重置偏好",deleteGroupTitle:"删除组",deleteGroupMessage:"确定要删除此组吗？此组中的用户将失去这些权限。",deleteGroup:"删除组",disableAuthenticationTitle:"禁用身份验证",disableAuthenticationMessage:"确定要禁用身份验证吗？这将使您的 Bambuddy 实例无需登录即可访问。所有用户将保留在数据库中但身份验证将被禁用。",disableAuthentication:"禁用身份验证",configureBambuddy:"配置 Bambuddy",systemDefault:"系统默认",archiveSettings:"归档设置",newWindow:"新窗口",embeddedOverlay:"嵌入式叠加层",preferredSlicer:"首选切片软件",preferredSlicerDescription:"选择要用于打开文件的切片软件",orcaslicerKnownIssuesWarning:"OrcaSlicer 2.3.2 / 2.4.0-dev 存在已知 CLI 错误，无法切片许多 Bambu 创建的 3MF — 见上游 issue #12426（绘制的多挤出机文件 segfault）和 #13386（参数范围严格验证拒绝）。在上游修复发布之前，推荐使用 Bambu Studio。",useSlicerApi:"使用切片器 API",useSlicerApiDescription:"开启时，「切片」操作打开应用内切片器模态并调用 slicer-API sidecar。关闭时（默认），通过 URI 方案交给桌面切片器。",slicerCard:"切片器",orcaslicerApiUrl:"OrcaSlicer sidecar URL",bambuStudioApiUrl:"Bambu Studio sidecar URL",slicerApiUrlDescription:"slicer-API sidecar 容器的 URL。留空以使用 SLICER_API_URL / BAMBU_STUDIO_API_URL 环境变量默认值。",slicerBundles:{title:"切片器捆绑包",description:'导入从 BambuStudio 导出的 Printer Preset Bundle (.bbscfg)（文件 → 导出 → 导出预设捆绑包 → "Printer preset bundle"）。导入后，切片请求可以按名称从捆绑包中选择预设，无需重新上传 JSON 配置三元组。',uploadButton:"上传捆绑包",uploading:"上传中…",loading:"加载捆绑包中…",empty:"尚未导入捆绑包。",summary:"{{processCount}} 个工艺 · {{filamentCount}} 个耗材预设",delete:"删除",uploadSuccess:"已导入 {{name}}",uploadError:"上传捆绑包失败：{{message}}",deleteSuccess:"捆绑包已移除",deleteError:"删除捆绑包失败：{{message}}",confirmDeleteTitle:"移除此捆绑包？",confirmDeleteMessage:"引用「{{name}}」的切片请求将失败，直到捆绑包重新导入。"},externalCameras:"外部摄像头",costTracking:"成本追踪",printsOnly:"仅打印",totalConsumption:"总消耗",dataManagement:"数据管理",storageUsage:"存储使用情况",storageUsageDescription:"按类别的数据使用情况明细",storageUsageTotal:"总计",storageUsageErrors:"错误",storageUsageOtherBreakdown:"其他（包括静态资源、脚本和配置文件）",storageUsageSystem:"系统",storageUsageData:"数据",storageUsageUnavailable:"存储使用信息不可用",clearNotificationLogsDescription:"删除 30 天前的通知日志",resetUiPreferencesDescription:"重置侧边栏顺序、主题、视图模式和布局偏好。打印机、归档和设置不受影响。",enableHomeAssistant:"启用 Home Assistant",enableMqtt:"启用 MQTT",useTls:"使用 TLS",enableMetricsEndpoint:"启用指标端点",availableMetrics:"可用指标",editUser:"编辑用户",deleteUserTitle:"删除用户",groupName:"组名称",leaveEmptyForAnonymous:"留空为匿名",leaveEmptyForNoAuth:"留空为无认证",enterNewPassword:"输入新密码",confirmNewPassword:"确认新密码",enterGroupName:"输入组名称",enterDescriptionOptional:"输入描述（可选）",enterCurrentPassword:"输入当前密码",enterNewPasswordMin6:"输入新密码（至少 6 个字符）",toast:{keyCopied:"密钥已复制到剪贴板",copyFailed:"复制密钥失败",keyAddedToBrowser:"密钥已添加到 API 浏览器",clearLogsFailed:"清除日志失败",uiPreferencesReset:"UI 偏好已重置。刷新中...",authDisabled:"身份验证已成功禁用",authDisableFailed:"禁用身份验证失败",apiKeyCreated:"API 密钥已创建",apiKeyDeleted:"API 密钥已删除",userCreated:"用户创建成功",userUpdated:"用户更新成功",userDeleted:"用户删除成功",groupCreated:"组创建成功",groupUpdated:"组更新成功",groupDeleted:"组删除成功",fillRequiredFields:"请填写所有必填字段",passwordsDoNotMatch:"密码不匹配",passwordTooShort:"密码至少需要 8 个字符",passwordNeedsUppercase:"密码必须至少包含一个大写字母",passwordNeedsLowercase:"密码必须至少包含一个小写字母",passwordNeedsDigit:"密码必须至少包含一个数字",passwordNeedsSpecial:"密码必须至少包含一个特殊字符",enterGroupName:"请输入组名称",settingsSaved:"设置已保存",noPermissionUpdate:"您没有权限更改设置",cameraSettingsSaved:"摄像头设置已保存",enterCameraUrl:"请输入摄像头 URL",passwordChanged:"密码修改成功",connectionFailed:"连接失败",testFailed:"测试失败",cameraConnected:"摄像头已连接{{resolution}}"},testConnection:"测试连接",catalog:{spoolCatalog:"耗材目录",spoolCatalogDescription:"按品牌/类型的空耗材重量。用于添加耗材时的自动重量查找。",searchCatalog:"搜索目录...",addNewEntry:"添加新条目",namePlaceholder:"名称（例如：Bambu Lab - 塑料）",weight:"重量",type:"类型",default:"默认",custom:"自定义",noMatch:"没有条目匹配您的搜索",empty:"目录中没有条目",deleteEntry:"删除条目",deleteConfirm:'确定要删除"{{name}}"吗？',resetCatalog:"重置目录",resetConfirm:"重置目录为默认值？这将移除所有自定义条目。",loadFailed:"加载耗材目录失败",nameWeightRequired:"名称和重量为必填项",entryAdded:"条目已添加",addFailed:"添加条目失败",entryUpdated:"条目已更新",updateFailed:"更新条目失败",entryDeleted:"条目已删除",deleteFailed:"删除条目失败",resetSuccess:"目录已重置为默认值",resetFailed:"重置目录失败",exported:"已导出 {{count}} 条",imported:"已导入 {{added}} 条（跳过 {{skipped}} 条）",importFailed:"导入失败：无效的 JSON 格式",exportTooltip:"导出目录为 JSON",importTooltip:"从 JSON 导入目录",resetTooltip:"重置为默认值",selectedCount:"已选择 {{count}} 项",deleteSelected:"删除所选",bulkDeleteConfirm:"确定要删除 {{count}} 个条目吗？",bulkDeleted:"已删除 {{count}} 个条目",bulkDeleteFailed:"删除条目失败",material:"材料",spoolWeight:"线轴重量",color:"颜色",updateSpoolWeight:"更新线轴重量",filamentUpdated:"耗材已更新",filamentUpdateFailed:"更新耗材失败",filamentUpdateInvalid:"耗材数据无效",keepExistingSpoolWeight:"保留现有线轴的旧重量",keepExistingSpoolWeightDesc:"已使用此耗材类型创建的线轴保留旧的皮重。新线轴使用更新后的值。",applyToAllSpools:"应用到所有线轴",applyToAllSpoolsDesc:"此耗材类型的所有重量计算立即使用新的皮重。"},colorCatalog:{title:"颜色目录",description:"按制造商/材料的耗材颜色。用于添加耗材时的自动颜色查找。",searchColors:"搜索颜色...",allManufacturers:"所有制造商",addNewColor:"添加新颜色",manufacturer:"制造商",colorName:"颜色名称",hex:"十六进制",materialOptional:"材料（可选）",showing:"显示 {{filtered}} / {{total}} 种颜色",noMatch:"没有颜色匹配您的搜索",empty:"目录中没有颜色",deleteColor:"删除颜色",deleteConfirm:'确定要删除"{{name}}"吗？',resetCatalog:"重置颜色目录",resetConfirm:"重置目录为默认值？这将移除所有自定义颜色。",sync:"同步",starting:"启动中...",syncTooltip:"从 FilamentColors.xyz 同步（2000+ 种颜色，可能需要一分钟）",loadFailed:"加载颜色目录失败",fieldsRequired:"制造商、颜色名称和十六进制颜色为必填项",colorAdded:"颜色已添加",addFailed:"添加颜色失败",colorUpdated:"颜色已更新",updateFailed:"更新颜色失败",colorDeleted:"颜色已删除",deleteFailed:"删除颜色失败",resetSuccess:"颜色目录已重置为默认值",resetFailed:"重置目录失败",syncUpToDate:"已是最新（检查了 {{count}} 种颜色）",syncComplete:"添加了 {{added}} 种新颜色（{{skipped}} 种已存在）",syncError:"同步错误",syncFailed:"从 FilamentColors.xyz 同步失败",exported:"已导出 {{count}} 种颜色",imported:"已导入 {{added}} 种颜色（跳过 {{skipped}} 种）",importFailed:"导入失败：无效的 JSON 格式",selectedCount:"已选择 {{count}} 项",deleteSelected:"删除所选",bulkDeleteConfirm:"确定要删除 {{count}} 种颜色吗？",bulkDeleted:"已删除 {{count}} 种颜色",bulkDeleteFailed:"删除颜色失败"},dateFormat:"日期格式",dateFormatUs:"美式 (MM/DD/YYYY)",dateFormatEu:"欧式 (DD/MM/YYYY)",dateFormatIso:"ISO (YYYY-MM-DD)",timeFormat:"时间格式",timeFormat12:"12小时制 (3:30 PM)",timeFormat24:"24小时制 (15:30)",defaultPrinter:"默认打印机",defaultPrinterDescription:"为上传、重印和其他操作预选此打印机。",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"拖拽侧边栏项目以重新排序。在此处重置为默认顺序。",setDefault:"设为默认",sidebarOrderSetDefaultHint:"设为默认将当前菜单顺序应用于尚未自定义的用户。",sidebarDefaultSet:"已设置默认菜单顺序。",sidebarDefaultCleared:"已清除默认菜单顺序。",sidebarDefaultFailed:"设置默认菜单顺序失败。",reset:"重置",darkMode:"深色模式",lightMode:"浅色模式",active:"(当前)",background:"背景",accent:"强调色",style:"样式",bgNeutral:"中性",bgWarm:"暖色",bgCool:"冷色",bgOled:"OLED 纯黑",bgSlate:"石板蓝",bgForest:"森林绿",accentGreen:"绿色",accentTeal:"青色",accentBlue:"蓝色",accentOrange:"橙色",accentPurple:"紫色",accentRed:"红色",styleClassic:"经典",styleGlow:"发光",styleVibrant:"鲜艳",themeToggleHint:"使用侧边栏中的图标在深色、浅色和系统模式之间切换。",autoArchivePrints:"自动归档打印",autoArchiveDescription:"打印完成时自动保存3MF文件",saveThumbnailsDescription:"从3MF文件中提取并保存预览图像",captureFinishPhotoDescription:"打印完成时从打印机摄像头拍照。Bambuddy 会在打印期间录制一段短延时摄影，以便从热床下降前的瞬间获取照片；如果您为本次打印启用了延时摄影，文件将保留，否则会在拍照完成后自动删除。",ffmpegNotInstalled:"未安装ffmpeg",ffmpegRequired:"摄像头捕获需要ffmpeg。通过 <brew>brew install ffmpeg</brew>（macOS）或 <apt>apt install ffmpeg</apt>（Linux）安装。",camera:"摄像头",cameraViewMode:"摄像头查看模式",cameraOverlayDescription:"摄像头在主屏幕上以可调大小的覆盖层打开",cameraWindowDescription:"摄像头在单独的浏览器窗口中打开",externalCamerasDescription:"配置外部摄像头以替换内置打印机摄像头。支持MJPEG流、RTSP、HTTP快照和USB摄像头（V4L2）。启用后，外部摄像头将用于实时查看和完成照片。",cameraPlaceholderUsb:"设备路径 (/dev/video0)",cameraPlaceholderUrl:"摄像头URL (rtsp://... 或 http://...)",cameraTypeMjpeg:"MJPEG 流",cameraTypeRtsp:"RTSP 流",cameraTypeSnapshot:"HTTP 快照",cameraTypeUsb:"USB 摄像头 (V4L2)",cameraSnapshotUrl:"快照 URL（可选）",cameraSnapshotUrlPlaceholder:"http://192.168.1.61:1984/api/frame.jpeg?src=printer",cameraSnapshotUrlHelp:"用于通知缩略图、完成照片、层延时摄影帧和打印板检测的单帧 URL。延时摄影和打印板检测各自需要自己的每打印机开关 — 此 URL 只是它们激活时拉取的图像源。留空以从上方实时流捕获。适用于 go2rtc（/api/frame.jpeg）和具有专用快照端点的 IP 摄像头。",cameraRotation:"旋转",test:"测试",connected:"已连接",disconnected:"未连接",currency:"货币",defaultFilamentCost:"默认耗材成本（每公斤）",electricityCost:"每千瓦时电费",energyDisplayMode:"能源显示模式",energyModePrintDescription:"仪表板显示打印期间使用的能源总和",energyModeTotalDescription:"仪表板显示智能插座的累计能源",fileManager:"文件管理器",createArchiveEntry:"打印时创建归档条目",createArchiveEntryDescription:"从文件管理器打印时，可选择创建归档条目",lowDiskSpaceWarning:"磁盘空间不足警告",lowDiskSpaceDescription:"当可用磁盘空间低于此阈值时显示警告",printerFirmware:"打印机固件",checkFirmwareDescription:"检查Bambu Lab的打印机固件更新",bambuddySoftware:"Bambuddy 软件",autoCheckDescription:"启动时自动检查新版本",checkNow:"立即检查",updateAvailableVersion:"可用更新：v{{version}}",releaseNotes:"发布说明",updateViaDocker:"通过 Docker Compose 更新：",updateViaHomeAssistant:"更新由 Home Assistant Supervisor 管理。请在 Home Assistant 中打开 设置 → 加载项 → Bambuddy 以安装新版本。",installUpdate:"安装更新",latestVersionRunning:"您正在运行最新版本",failedToCheckUpdates:"检查更新失败：{{error}}",backupRestore:"备份与恢复",backupRestoreDescription:"导出/导入设置并配置GitHub备份",goToBackup:"前往备份",externalUrl:"外部URL",externalUrlDescription:"Bambuddy可访问的外部URL。用于通知图像和外部集成。",bambuddyUrl:"Bambuddy URL",externalUrlHint:"包含协议和端口（例如：http://192.168.1.100:8000）",ftpRetry:"FTP重试",ftpRetryDescription:"当打印机WiFi不稳定时重试FTP操作。适用于3MF下载、打印上传、延时摄影下载和固件更新。",autoRetryDescription:"自动重试失败的FTP操作",retryAttempts:"重试次数",retryDelay:"重试延迟",connectionTimeout:"连接超时",time_one:"{{count}}次",time_other:"{{count}}次",second_one:"{{count}}秒",second_other:"{{count}}秒",nSeconds:"{{count}}秒",increaseForWeakWifi:"对WiFi信号弱的打印机增加此值",homeAssistant:"Home Assistant",homeAssistantFullDescription:"连接到Home Assistant，通过HA REST API控制智能插座。支持switch、light、input_boolean和script实体。",homeAssistantUrl:"Home Assistant URL",longLivedAccessToken:"长期访问令牌",haTokenHint:"在HA中创建令牌：个人资料 → 长期访问令牌 → 创建令牌",connectionSuccessful:"连接成功",connectionFailed:"连接失败",haConnectionSuccess:"已成功连接到Home Assistant。",haConnectionFailed:"连接Home Assistant失败。",mqttPublishing:"MQTT发布",mqttDescription:"将BamBuddy事件发布到外部MQTT代理，用于与Node-RED、Home Assistant和其他自动化系统集成。",mqttEnableDescription:"向外部MQTT代理发布事件",brokerHostname:"代理主机名",port:"端口",usernameOptional:"用户名（可选）",passwordOptional:"密码（可选）",topicPrefix:"主题前缀",topicPrefixHint:"主题格式：{{prefix}}/printers/<serial>/status 等",prometheusMetrics:"Prometheus 指标",prometheusEndpointDescription:"在 <code>/api/v1/metrics</code> 公开打印机指标，用于Prometheus/Grafana监控。",bearerTokenOptional:"Bearer令牌（可选）",bearerTokenHint:"设置后，请求必须包含 <code>Authorization: Bearer <token></code>",metricsConnectionStatus:"连接状态",metricsPrinterState:"打印机状态（空闲/打印中等）",metricsPrintProgress:"打印进度 0-100%",metricsBedTemp:"热床温度",metricsNozzleTemp:"喷嘴温度",metricsPrintsTotal:"按结果分类的总打印数",metricsMore:"...以及更多（层数、风扇、队列、耗材用量）",smartPlugsDescription:"连接智能插座（Tasmota或Home Assistant）以自动化电源控制并跟踪打印机的能源使用情况。",allOn:"全部开启",allOff:"全部关闭",addSmartPlug:"添加智能插座",energySummary:"能源概要",currentPower:"当前功率",plugsOnline:"{{reachable}}/{{total}} 个插座在线",today:"今天",yesterday:"昨天",total:"总计",enablePlugsForSummary:"启用插座以查看能源概要",addNotificationProvider:"添加",systemBadge:"(系统)",creating:"创建中...",changing:"修改中...",deleteUserAndItems:"删除用户及其所有项目",deleteUserKeepItems:"删除用户，保留项目（将变为无主项目）",ok:"确定",twoFa:{totpTitle:"身份验证器应用 (TOTP)",totpDesc:"使用 Google Authenticator、Aegis 或 Authy 等应用。",emailOtpTitle:"邮件 OTP",emailOtpDesc:"登录时向 {{email}} 发送一次性验证码。",emailOtpNoEmail:"请先为账户添加邮箱地址以启用此方式。",addEmailFirst:"您的账户没有邮箱地址，请联系管理员添加。",setupTotp:"设置身份验证器应用",setupAuthApp:"设置身份验证器应用",setupInstructions:"使用身份验证器应用扫描二维码，然后输入验证码确认。",manualEntry:"无法扫描？请手动输入此密钥：",scannedContinue:"已扫描 — 继续",enterCodeToConfirm:"请输入身份验证器应用中的6位验证码以确认设置。",activate:"激活",disableTotp:"停用身份验证器",disableConfirmHint:"请输入有效的 TOTP 码或备用码来停用身份验证器。",totpDisabled:"身份验证器应用已停用。",emailOtpEnabled:"邮件 OTP 已启用。",emailOtpDisabled:"邮件 OTP 已停用。",smtpRequired:"请先配置并测试SMTP设置。",invalidCode:"无效验证码，请重试。",enableEmailOtp:"启用邮件 OTP",disableEmailOtp:"停用邮件 OTP",emailSetupEnterCode:"验证码已发送至您的邮箱地址。请在下方输入以确认您拥有此邮箱。",verifyAndEnable:"验证并启用",emailDisablePasswordHint:"请输入您的账户密码以确认停用邮件 OTP。",passwordPlaceholder:"输入您的密码",backupCodesTitle:"保存备用码",backupCodesWarning:"请将这些码保存在安全的地方。每个码只能使用一次，且不会再次显示。",backupCodesRemaining:"剩余 {{count}} 个备用码",savedCodes:"已保存",regenBackup:"重新生成备用码",regenBackupHint:"输入当前 TOTP 码以生成 10 个新备用码，所有现有备用码将失效。",newBackupCodes:"新备用码",linkedAccounts:"已关联的 SSO 账户",linkedAccountsDesc:"以下外部身份提供商已与您的账户关联。",oidcUnlinked:"账户已解除关联。"},oidc:{title:"SSO / OIDC 提供商",desc:"配置 OpenID Connect 提供商以实现单点登录。",addProvider:"添加提供商",newProvider:"新提供商",empty:"尚未配置 OIDC 提供商。",created:"提供商已创建。",updated:"提供商已更新。",deleted:"提供商已删除。",refreshIcon:"刷新图标",removeIcon:"移除图标",iconRefreshed:"图标已刷新。",iconRemoved:"图标已移除。",iconFetchFailed:"无法从提供商 URL 获取图标。",deleteTitle:"删除提供商",deleteMessage:'删除"{{name}}"？所有关联账户将断开连接。',form:{name:"显示名称",issuerUrl:"颁发者 URL",clientId:"客户端 ID",clientSecret:"客户端密钥",scopes:"作用域",iconUrl:"图标 URL（可选）",enabled:"已启用",autoCreate:"自动创建用户",autoCreateDesc:"首次登录时自动创建本地账户。",autoLink:"自动关联已有账户",autoLinkDesc:"首次登录时通过邮箱匹配现有本地账户并自动关联。",secretHint:"留空以保留当前",secretPlaceholder:"新密钥",emailClaim:"邮箱声明",emailClaimDesc:"用作邮箱身份的 JWT 声明。Azure Entra ID 请使用 'preferred_username' 或 'upn'（不发送 email_verified）。仅使用可信的声明名称。",emailClaimPlaceholder:"邮箱",emailClaimCustomClaimAutoLinkWarning:"自定义声明仅在值由租户管理时（例如 Azure Entra ID 的 upn / preferred_username）对自动关联安全。如果您的 IdP 允许用户自我声明此声明，请勿启用自动关联。",requireEmailVerified:"要求邮箱已验证",requireEmailVerifiedDesc:"仅在提供商将邮箱声明标记为已验证时才接受。",requireEmailVerifiedWarning:"警告：将在未经验证的情况下接受邮箱。仅对受信任的提供商使用。",requireEmailVerifiedAutoLink:"请先禁用自动关联以更改此设置。",defaultGroup:"默认组",defaultGroupDesc:"自动创建用户时分配的组。未设置时回退到 Viewers。",defaultGroupViewersFallback:"Viewers（默认）"}},encryption:{title:"MFA 加密状态",enabledFromEnv:"已启用静态加密（密钥来自 MFA_ENCRYPTION_KEY 环境变量）",enabledFromFile:"已启用静态加密（密钥从数据目录加载）",enabledGenerated:"使用自动生成的密钥启用静态加密",notConfigured:"未配置静态加密",notConfiguredDesc:"TOTP 密钥和 OIDC client_secrets 以明文存储。请设置 MFA_ENCRYPTION_KEY 或使用可写数据目录重启 Bambuddy 以自动生成。",allEncrypted:"所有 MFA 密钥均已静态加密。",legacyRowsLabel:"旧版明文行",encryptedRowsLabel:"已加密行",legacyRowsWarning:"检测到 {{count}} 个旧版明文行。请重新保存 OIDC 提供商或重新注册用户的身份验证器应用，以迁移到加密存储。",backupHint:"自动生成的密钥存储在 DATA_DIR/.mfa_encryption_key 中，并包含在本地备份 ZIP 中。请保护备份安全或显式设置 MFA_ENCRYPTION_KEY。",decryptionBrokenTitle:"加密密钥缺失",decryptionBrokenError:"无法解密 {{count}} 条加密记录，因为加密密钥不再可用。请恢复以前的 MFA_ENCRYPTION_KEY 或 DATA_DIR/.mfa_encryption_key 以恢复访问。",migrationErrorWarning:"{{count}} 行旧数据在启动时未能重新加密。请检查服务器日志并重启 Bambuddy 以重试。"}},notification:{printStarted:{title:"打印已开始",body:"{{printer}}：{{filename}} 已开始打印"},printCompleted:{title:"打印已完成",body:"{{printer}}：{{filename}} 已成功完成"},printFailed:{title:"打印失败",body:"{{printer}}：{{filename}} 打印失败"},printStopped:{title:"打印已停止",body:"{{printer}}：{{filename}} 已停止"},printProgress:{title:"打印进度",body:"{{printer}}：{{filename}} 已完成 {{percent}}%"},printerOffline:{title:"打印机离线",body:"{{printer}} 已离线"},printerError:{title:"打印机错误",body:"{{printer}}：{{error}}"},filamentLow:{title:"耗材不足",body:"{{printer}}：耗材即将用完"},maintenanceDue:{title:"维护到期",body:"{{printer}}：{{items}} 需要关注"}},errors:{generic:"出了点问题",networkError:"网络错误。请检查您的连接。",notFound:"未找到",unauthorized:"未授权",serverError:"服务器错误",validationError:"请检查您的输入",printerConnectionFailed:"连接打印机失败",saveFailed:"保存更改失败",deleteFailed:"删除失败",loadFailed:"加载数据失败"},hmsErrors:{title:"错误 - {{name}}",noErrors:"无错误",viewOnWiki:"在拓竹 Wiki 上查看",clearInstructions:"在打印机上清除错误以在此处消除它们。",clearErrors:"清除错误",clearSuccess:"HMS 错误已清除",clearFailed:"清除 HMS 错误失败"},mqttDebug:{title:"MQTT 调试日志",searchPlaceholder:"搜索主题或负载...",noMessages:"尚未记录消息",startLoggingHint:'点击"开始记录"以开始捕获 MQTT 消息',noMessagesMatch:"没有消息匹配您的筛选条件",adjustFilterHint:"尝试调整您的搜索或筛选条件",incoming:"传入",outgoing:"传出",loggingStopped:"记录已停止",loggingActive:"记录中 - 消息将自动刷新",startLogging:"开始记录",stopLogging:"停止记录",clearLog:"清除日志",topic:"主题",timestamp:"时间戳",direction:"方向",all:"全部"},printerFiles:{title:"文件管理器",storageUsed:"已用：",storageFree:"剩余：",filterPlaceholder:"筛选文件...",deleteButton:"删除",deleteFiles:"删除 {{count}} 个文件",deleteFileConfirm:'删除"{{name}}"？此操作无法撤销。',deleteFilesConfirm:"删除 {{count}} 个选中的文件？此操作无法撤销。",noFiles:"打印机上没有文件",loadingFiles:"加载文件中...",failedToLoad:"加载文件失败",toast:{filesDeleted:"已删除 {{count}} 个文件",deleteFailed:"删除失败：{{error}}"}},confirm:{delete:"确定要删除吗？",unsavedChanges:"您有未保存的更改。确定要离开吗？",clearQueue:"确定要清空队列吗？"},login:{title:"Bambuddy 登录",subtitle:"登录您的账户",username:"用户名",usernamePlaceholder:"输入您的用户名",usernameOrEmail:"用户名或邮箱",usernameOrEmailPlaceholder:"用户名或 @ 邮箱",password:"密码",passwordPlaceholder:"输入您的密码",signIn:"登录",signingIn:"登录中...",rememberMe:"记住我",forgotPassword:"忘记密码？",loginSuccess:"登录成功",loginFailed:"登录失败",enterCredentials:"请输入用户名和密码",enterEmail:"请输入您的电子邮件地址",oidcLoginFailed:"OIDC 登录失败",oidcErrors:{providerError:"身份提供商返回了一个错误",missingParameters:"OIDC 回调缺少必要参数",invalidState:"OIDC 状态无效或已被使用",stateExpired:"OIDC 登录会话已过期，请重试",providerNotFound:"未找到 OIDC 提供商",discoveryFailed:"无法获取 OIDC 发现文档",invalidDiscovery:"OIDC 发现文档无效",networkError:"OIDC 令牌交换时出现网络错误",badResponse:"OIDC 令牌交换时收到意外响应",noIdToken:"OIDC 提供商未返回 ID 令牌",validationFailed:"OIDC 令牌验证失败",nonceMismatch:"OIDC nonce 不匹配，可能存在重放攻击",missingSubClaim:"OIDC 令牌缺少 sub 声明",noLinkedAccount:"没有与此 OIDC 身份关联的本地帐户",accountInactive:"您的帐户已被停用",userResolutionFailed:"无法解析您的帐户",internalError:"OIDC 登录过程中发生内部错误",tokenExchangeFailed:"OIDC 令牌交换失败"},forgotPasswordTitle:"忘记密码",forgotPasswordMessage:"如果您忘记了密码，请联系系统管理员进行重置。",forgotPasswordEmailMessage:"输入您的邮箱地址，我们将向您发送新密码。",emailAddress:"邮箱地址",emailPlaceholder:"your.email@example.com",cancel:"取消",sending:"发送中...",sendResetEmail:"发送重置邮件",howToReset:"如何重置密码：",resetStep1:"联系您的 Bambuddy 管理员",resetStep2:"请他们在用户管理中重置您的密码",resetStep3:"他们可以为您设置一个临时密码",resetStep4:"使用新密码登录并在设置中修改密码",gotIt:"知道了",resetPassword:{title:"设置新密码",subtitle:"请在下方输入并确认您的新密码。",newPassword:"新密码",newPasswordPlaceholder:"至少 8 个字符",confirmPassword:"确认密码",confirmPasswordPlaceholder:"重复输入新密码",saving:"保存中…",submit:"设置新密码",backToLogin:"返回登录",passwordsDoNotMatch:"密码不匹配",passwordTooShort:"密码至少需要 8 个字符",resetFailed:"密码重置失败。链接可能已过期。"},twoFA:{title:"两步验证",subtitle:"您的账户已启用两步验证。请在下方输入验证码。",methodAuthenticator:"身份验证器应用",methodEmail:"邮箱验证码",methodBackup:"备用恢复码",instructionsTotp:"请打开您的身份验证器应用，输入 Bambuddy 的 6 位验证码。",instructionsEmail:"6 位验证码已发送至您的邮箱，有效期为 10 分钟。",instructionsEmailNotSent:"点击下方按钮，通过邮件获取验证码。",instructionsBackup:"请输入您的一个 8 位备用恢复码。每个恢复码只能使用一次。",sendCodeButton:"发送邮箱验证码",sendingCode:"发送中...",resendCode:"重新发送验证码",codeLabel:"验证码",backupCodeLabel:"备用恢复码",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"验证",verifyingButton:"验证中...",backToLogin:"← 返回登录页面",orContinueWith:"或通过以下方式登录",signInWith:"使用 {{provider}} 登录",enterCode:"请输入验证码",sendCodeFailed:"验证码发送失败",invalidCode:"无效验证码，请重试。"}},setup:{title:"Bambuddy 设置",subtitle:"为您的 Bambuddy 实例配置身份验证",enableAuth:"启用身份验证",adminAccount:"管理员账户",adminAccountDesc:"如果管理员用户已存在，将使用现有管理员账户启用身份验证。如需使用现有管理员，请将下方字段留空，或输入新凭据创建新管理员用户。",adminUsername:"管理员用户名",adminPassword:"管理员密码",optionalIfAdminExists:"（如管理员用户已存在则为可选）",adminUsernamePlaceholder:"输入管理员用户名（可选）",adminPasswordPlaceholder:"输入管理员密码（可选）",confirmPassword:"确认密码",confirmPasswordPlaceholder:"确认管理员密码",settingUp:"设置中...",completeSetup:"完成设置",toast:{authEnabledAdminCreated:"身份验证已启用并创建了管理员用户",authEnabledExistingAdmins:"使用现有管理员用户启用了身份验证",setupCompleted:"设置完成",enterBothCredentials:"请输入管理员用户名和密码，或将两者留空以使用现有管理员用户",passwordsDoNotMatch:"密码不匹配",passwordTooShort:"密码至少需要 6 个字符"}},changePassword:{title:"修改密码",currentPassword:"当前密码",currentPasswordPlaceholder:"输入当前密码",newPassword:"新密码",newPasswordPlaceholder:"输入新密码（至少 6 个字符）",confirmPassword:"确认新密码",confirmPasswordPlaceholder:"确认新密码",passwordsDoNotMatch:"密码不匹配",passwordTooShort:"密码至少需要 6 个字符",changing:"修改中...",success:"密码修改成功",failed:"密码修改失败"},plateAlert:{title:"打印已暂停！",message:"在构建板上检测到物体。打印已自动暂停。请清理打印板并继续打印。",understand:"我知道了"},camera:{title:"摄像头视图",invalidPrinterId:"无效的打印机 ID",live:"实时",snapshot:"快照",restartStream:"重启流",refreshSnapshot:"刷新快照",fullscreen:"全屏",exitFullscreen:"退出全屏",connectingToCamera:"连接摄像头中...",capturingSnapshot:"拍摄快照中...",connectionLost:"连接已断开",connectionFailed:"摄像头连接失败",reconnecting:"{{countdown}} 秒后重新连接...（第 {{attempt}}/{{max}} 次尝试）",reconnectNow:"立即重新连接",cameraUnavailable:"摄像头不可用",cameraUnavailableDesc:"请确保打印机已通电并已连接。",noCamera:"无可用摄像头",retry:"重试",cameraStream:"摄像头流",zoomOut:"缩小",zoomIn:"放大",resetZoom:"重置缩放",recording:"录制中",startRecording:"开始录制",stopRecording:"停止录制",chamberLight:"切换腔室灯",unavailable:"摄像头不可用",diagnose:{button:"诊断",modalTitle:"摄像头诊断",running:"正在运行诊断...",runFailed:"无法运行诊断: {{error}}",retry:"重新运行",stage:{tcp_reachable:"网络可达性",first_frame:"画面捕获",live_stream_active:"直播流正在进行"},summary:{all_ok:"摄像头工作正常。诊断已成功完成所有阶段。",live_stream_active_healthy:"摄像头正在传输最新画面 — 无需测试。",printer_unreachable:"无法访问打印机。请检查 IP 地址、网络连接以及打印机是否已开机。",camera_port_closed:"打印机可访问，但摄像头端口已关闭。请确保打印机设置中已启用仅 LAN 模式和开发者模式。",no_frame:"已连接到摄像头，但未收到画面。请重试或检查打印机设置中摄像头是否已启用。",unknown_failure:"摄像头诊断因未知原因失败。请查看支持日志了解详情。"},meta:{protocol:"协议",port:"端口",profile:"配置"}}},groups:{title:"组管理",subtitle:"管理访问控制的权限组",backToSettings:"返回设置",createGroup:"创建组",noPermission:"您没有访问此页面的权限。",system:"系统",noDescription:"无描述",usersCount:"{{count}} 个用户",permissionsCount:"{{count}} 个权限",edit:"编辑",delete:"删除",toast:{created:"组创建成功",updated:"组更新成功",deleted:"组删除成功",enterGroupName:"请输入组名称"},modal:{editGroup:"编辑组",createGroup:"创建组",cancel:"取消",saving:"保存中...",creating:"创建中...",saveChanges:"保存更改"},form:{groupName:"组名称",groupNamePlaceholder:"输入组名称",systemGroupWarning:"系统组名称不可更改",description:"描述",descriptionPlaceholder:"输入描述（可选）",permissions:"权限（已选 {{count}} 个）"},deleteModal:{title:"删除组",message:"确定要删除此组吗？此组中的用户将失去这些权限。",confirm:"删除组"},editor:{title:"编辑组",createTitle:"创建组",search:"搜索权限...",selectAll:"全选",clearAll:"清除全部",permissionsSelected:"已选 {{count}} 个",noResults:"没有权限匹配您的搜索"}},users:{title:"用户管理",subtitle:"管理用户及其对 Bambuddy 实例的访问",backToSettings:"返回设置",createUser:"创建用户",noPermission:"您没有访问此页面的权限。",admin:"管理员",noGroups:"无组",active:"活跃",inactive:"非活跃",edit:"编辑",delete:"删除",system:"系统",noGroupsAvailable:"无可用组",table:{username:"用户名",groups:"组",status:"状态",actions:"操作"},toast:{created:"用户创建成功",updated:"用户更新成功",deleted:"用户删除成功",fillRequired:"请填写所有必填字段",passwordsDoNotMatch:"密码不匹配",passwordTooShort:"密码至少需要 6 个字符",ldapProvisioned:"已创建 LDAP 用户「{{username}}」"},modal:{createUser:"创建用户",editUser:"编辑用户",cancel:"取消",creating:"创建中...",saving:"保存中...",saveChanges:"保存更改",advancedAuthSubtitle:"使用高级认证",tabsAriaLabel:"用户来源",localTab:"本地",ldapTab:"LDAP",ldapSearchLabel:"搜索目录",ldapSearchPlaceholder:"输入用户名、姓名或电子邮件...",ldapMinChars:"输入至少 2 个字符以搜索",ldapTypeToSearch:"开始输入以搜索 LDAP 目录",ldapSearching:"搜索目录中...",ldapNoResults:"目录中没有匹配的用户",ldapSearchError:"目录搜索失败。请检查 LDAP 服务器状态。",ldapAlreadyProvisioned:"已创建",ldapSelectedLabel:"已选",ldapProvision:"创建用户",ldapProvisioning:"创建中...",ldapErrorProvision:"创建失败。请检查 LDAP 服务器状态后重试。"},form:{username:"用户名",usernamePlaceholder:"输入用户名",email:"邮箱",emailPlaceholder:"user@example.com",password:"密码",passwordPlaceholder:"输入密码",confirmPassword:"确认密码",confirmPasswordPlaceholder:"确认密码",newPasswordPlaceholder:"输入新密码",confirmNewPasswordPlaceholder:"确认新密码",leaveBlankToKeep:"留空以保持当前值",groups:"组",optional:"可选",autoGeneratedPassword:"将自动生成安全密码并通过邮件发送给用户。",passwordManagedByAdvancedAuth:'密码由高级认证管理。使用"重置密码"通过邮件向用户发送新密码。',resetPassword:"重置密码",resettingPassword:"重置密码中..."},deleteModal:{title:"删除用户",message:"确定要删除此用户吗？此操作无法撤销。",confirm:"删除用户"}},streamOverlay:{title:"流叠加层",invalidPrinterId:"无效的打印机 ID",cameraStream:"摄像头流",progress:"进度",eta:"预计完成时间",printerIdle:"打印机空闲",printerOffline:"打印机离线",status:{printing:"打印中",paused:"已暂停",finished:"已完成",failed:"失败",idle:"空闲",unknown:"未知"}},profiles:{title:"配置文件",subtitle:"管理您的切片预设和压力推进校准",tabs:{bambuCloud:"Bambu Cloud",orcaCloud:"Orca Cloud",local:"本地配置文件",kprofiles:"K 值配置"},orcaCloud:{connectedAs:"已连接",logout:"断开连接",noLogoutPermission:"您没有断开连接的权限",noConnectPermission:"您没有连接到 Orca Cloud 的权限",retry:"重试",back:"使用其他登录方式",connect:{title:"连接到 Orca Cloud",description:"登录您的 Orca Cloud 账户,将切片机配置同步到 Bambuddy。"},providers:{google:"使用 Google 登录",apple:"使用 Apple 登录",github:"使用 GitHub 登录",email:"使用邮箱和密码登录"},password:{title:"使用邮箱和密码登录",email:"邮箱",emailPlaceholder:"you@example.com",password:"密码",submit:"登录"},paste:{title:"完成登录",step1:"已在新标签页中打开 Orca Cloud 登录页面。请使用您的 Orca 账户登录。",step2:'您的浏览器将被重定向到一个 "localhost" URL,该 URL 无法加载。这是正常的 — 我们需要的就是这个 URL。',step3:"从浏览器的地址栏复制整个 URL,粘贴到下方。",signInUrl:"如果登录标签页未打开,请点击此 URL:",label:"在此处粘贴回调 URL",placeholder:"http://localhost:41172/callback?code=...&state=...",submit:"完成连接"},profiles:{title:"您的 Orca Cloud 配置文件 ({{count}})",refresh:"刷新",empty:"您的 Orca Cloud 账户中尚无配置文件。"},toast:{connected:"已以 {{email}} 身份连接到 Orca Cloud",disconnected:"已从 Orca Cloud 断开连接"},errors:{startFailed:"无法启动 Orca Cloud 登录流程。",finishFailed:"无法完成 Orca Cloud 登录。",passwordFailed:"无法使用该邮箱和密码登录。",passwordEmpty:"请输入邮箱和密码。",emptyPaste:"请从浏览器粘贴回调 URL。",noCode:"该 URL 不像 Orca Cloud 回调 (缺少 code 参数)。请从地址栏复制完整 URL。"}},localProfiles:{title:"本地配置文件",subtitle:"从 OrcaSlicer 导入和管理切片预设",import:"导入配置文件",importDesc:"将 .bbscfg、.bbsflmt、.orca_filament、.zip 或 .json 文件拖放到此处",importing:"导入中...",search:"搜索本地预设...",noPresets:"暂无本地预设",noSearchResults:"没有与搜索匹配的预设",badge:"本地",edit:"编辑",delete:"删除",cancel:"取消",deleteConfirmTitle:"删除预设",deleteConfirm:"确定要删除此预设吗？此操作无法撤销。",source:"来源",inheritsFrom:"继承自",filamentType:"类型",vendor:"厂商",compatiblePrinters:"兼容打印机",nozzleTemp:"喷嘴温度",cost:"成本",density:"密度",pressureAdvance:"压力推进",filament:"耗材",process:"工艺",printer:"打印机",toast:{importSuccess:"已导入 {{count}} 个预设",importSkipped:"跳过 {{count}} 个预设（重复）",importError:"导入时出现 {{count}} 个错误",deleted:"预设已删除",updated:"预设已更新"}},connectedAs:"已连接为",logout:"退出登录",noLogoutPermission:"您没有退出登录的权限",failedToLoad:"加载配置文件失败",retry:"重试",time:{justNow:"刚刚",minsAgo:"{{count}} 分钟前",hoursAgo:"{{count}} 小时前",daysAgo:"{{count}} 天前"},toast:{loggedOut:"已退出登录"},login:{title:"连接到拓竹云",subtitle:"跨设备同步您的切片预设",email:"邮箱",password:"密码",region:"地区",regionGlobal:"全球",regionChina:"中国",verificationCode:"验证码",totpCode:"验证器代码",checkEmail:"检查您的邮箱 ({{email}}) 获取 6 位验证码",enterTotpHint:"输入验证器应用中的 6 位代码",accessToken:"访问令牌",accessTokenHint:"粘贴您的拓竹云访问令牌。中国大陆账号（绑定手机号、无邮箱登录）只能使用此方式登录。可从 MakerWorld 浏览器 Cookie 中获取令牌，详见 Wiki。",back:"返回",loginButton:"登录",verifyButton:"验证",setTokenButton:"设置令牌",useToken:"改用访问令牌",useEmail:"改用邮箱登录",toast:{loggedIn:"登录成功",codeSent:"验证码已发送到您的邮箱",enterTotp:"输入验证器应用中的代码",tokenSet:"令牌设置成功"}},presets:{myPreset:"我的预设（可编辑）",duplicate:"复制",editable:"可编辑",failedToLoadDetails:"加载预设详情失败",deleteConfirm:"删除此预设？",deleteWarning:'这将从拓竹云中永久删除"{{name}}"。此操作无法撤销。',noDuplicatePermission:"您没有复制预设的权限",noEditPermission:"您没有编辑预设的权限",noDeletePermission:"您没有删除预设的权限",types:{filament:"耗材预设",printer:"打印机预设",process:"工艺预设"},toast:{deleted:"预设已删除",created:"预设已创建",updated:"预设已更新",duplicated:"预设已复制",fieldAdded:'字段"{{key}}"已添加',exported:"预设已导出"},baseLabel:"基础：{{name}}",currentLabel:"当前：{{name}}",newPreset:"新建预设",editPreset:"编辑预设",duplicatePreset:"复制预设",createNewPreset:"创建新预设",customizeSettings:"自定义新预设的设置",compareWithBase:"与基础预设比较",compare:"比较",basePreset:"基础预设",selectBasePreset:"选择基础预设...",presetName:"预设名称",myCustomPreset:"我的自定义预设",inheritsFrom:"继承自",dropJsonToImport:"拖放 JSON 以导入",tabs:{common:"常用",allFields:"所有字段"},availableFields:"可用字段",searchFieldsPlaceholder:"搜索字段...",noMatchingFields:"没有匹配的字段",allFieldsAdded:"所有字段已添加",addCustomField:"添加自定义字段",yourOverrides:"您的覆盖值",noOverridesYet:"暂无覆盖值",clickFieldsToAdd:"点击左侧的字段进行添加",saveAsTemplate:"保存为模板",jsonTip:"提示：将 .json 文件拖放到此对话框的任意位置以导入设置"},cloudView:{searchPlaceholder:"搜索预设...",templates:"模板",refresh:"刷新",newPreset:"新建预设",clearFilters:"清除筛选",compareMode:"比较模式",selectAnotherPreset:"选择另一个 {{type}} 预设",clickTwoPresets:"点击两个相同类型的预设进行比较",selectFirst:"1. 选择第一个",selectSecond:"2. 选择第二个",compareNow:"立即比较",lastSynced:"上次同步：",showingCount:"显示 {{showing}} / {{total}} 个预设",noPresetsFound:"未找到预设",columns:{filament:"耗材",process:"工艺",printer:"打印机"},noFilamentPresets:"无耗材预设",noProcessPresets:"无工艺预设",noPrinterPresets:"无打印机预设",filters:{type:"类型",owner:"所有者",printer:"打印机",nozzle:"喷嘴",filament:"耗材",layer:"层",all:"全部",myPresets:"我的预设",builtIn:"内置",process:"工艺"},noTemplatesPermission:"您没有管理模板的权限",noRefreshPermission:"您没有刷新配置文件的权限",noCreatePermission:"您没有创建预设的权限"},templates:{title:"快速模板",noTemplates:"暂无模板",createFirst:"从预设编辑器创建模板",typeFilter:"类型：",deleteTitle:"删除模板",deleteWarning:"此操作无法撤销",deleteConfirm:'确定要删除"{{name}}"吗？',namePlaceholder:"模板名称",descriptionPlaceholder:"描述",settingsJson:"设置 (JSON)",fieldsCount:"{{count}} 个字段",shownInModals:"在对话框中显示",hiddenInModals:"在对话框中隐藏",apply:"应用",toast:{deleted:"模板已删除",updated:"模板已更新",created:"模板已创建",applied:"模板已应用"}}},support:{debugLoggingActive:"调试日志记录已激活",manageLogs:"管理",collectItem7:"打印机连接和固件版本",collectItem8:"集成状态（Spoolman、MQTT、HA）",collectItem9:"网络接口（仅子网）",collectItem10:"Python 包版本",collectItem11:"数据库健康检查",collectItem12:"Docker 环境详情",bundleGenerating:"正在生成包...",bundleStepConnection:"正在执行打印机连接性检查",bundleStepVirtualPrinters:"正在执行虚拟打印机设置检查",bundleStepLogScan:"正在扫描最近的日志以查找已知问题",bundleStepBuild:"正在构建支持包 ZIP 文件"},fileManager:{title:"文件管理器",subtitle:"组织和管理您的打印文件",uploadFiles:"上传文件",newFolder:"新建文件夹",folderName:"文件夹名称",folderNamePlaceholder:"例如：功能零件",renameFile:"重命名文件",renameFolder:"重命名文件夹",invalidFilenameChar:'打印文件名中不允许使用字符 "{{char}}"。打印机 SD 卡拒绝以下字符: < > : " / \\ | ? *',moveFiles:"移动 {{count}} 个文件",rootNoFolder:"根目录（无文件夹）",current:"当前",linkFolder:"链接文件夹",linkFolderDescription:'将"{{name}}"链接到项目或归档以便快速访问。',project:"项目",archive:"归档",noProjectsFound:"未找到项目",noArchivesFound:"未找到归档",unlink:"取消链接",link:"链接",dragDropFiles:"将文件拖放到此处",dropFilesHere:"将文件放在此处",orClickToBrowse:"或点击浏览",allFileTypesSupported:"支持所有文件类型。ZIP 文件将被解压。",zipFilesDetected:"检测到 ZIP 文件",zipExtractOptions:"ZIP 文件将被解压。选择如何处理文件夹结构：",preserveZipStructure:"保留 ZIP 中的文件夹结构",createFolderFromZip:"从 ZIP 文件名创建文件夹",stlThumbnailGeneration:"STL 缩略图生成",zipMayContainStl:"ZIP 文件可能包含 STL 文件。可以在解压时生成缩略图。",thumbnailsCanBeGenerated:"可以为 STL 文件生成缩略图。大型模型可能需要更长时间处理。",generateThumbnailsForStl:"为 STL 文件生成缩略图",threemfDetected:"检测到 3MF 文件",threemfExtractionInfo:"将自动从 3MF 文件中提取打印机型号、材料、颜色和打印设置。",willBeExtracted:"将被解压",filesExtracted:"已解压 {{count}} 个文件",uploadComplete:"上传完成：{{succeeded}} 个成功",uploadFailed:"上传失败",zipFilesFailed:"{{count}} 个文件失败",uploading:"上传中...",changeLink:"更改链接...",linkTo:"链接到...",linkToProjectOrArchive:"链接到项目或归档",addToQueue:"添加到队列",schedulePrint:"排程",generateThumbnail:"生成缩略图",generateThumbnails:"生成缩略图",generateThumbnailsForMissing:"为缺少缩略图的 STL 文件生成缩略图",gridView:"网格视图",listView:"列表视图",lowDiskSpaceWarning:"磁盘空间不足警告",lowDiskSpaceDetails:"仅剩 {{free}}（总共 {{total}}）。阈值设置为 {{threshold}} GB。",files:"文件",folders:"文件夹",size:"大小",free:"剩余",allFiles:"所有文件",allExternal:"外部",externalIsEmpty:"没有外部文件",externalEmptyDescription:"关联的外部文件夹中的文件将在此显示。",wrap:"换行",enableTextWrapping:"启用文本换行",disableTextWrapping:"禁用文本换行",collapse:"折叠",collapseFoldersByDefault:"默认折叠文件夹",expandFoldersByDefault:"默认展开文件夹",dragToResizeTooltip:"拖动调整大小，双击重置",searchFiles:"搜索文件...",allTypes:"所有类型",prints:"打印",ascending:"升序",descending:"降序",resultsCount:"{{showing}} / {{total}} 个文件",selectAll:"全选",deselectAll:"取消全选",selected:"已选择 {{count}} 个",adding:"添加中...",loadingFiles:"加载文件中...",folderIsEmpty:"文件夹为空",noFilesYet:"暂无文件",folderEmptyDescription:"上传文件或将文件移入此文件夹以开始使用。",noFilesDescription:"上传文件以开始组织您的打印相关文件。",noMatchingFiles:"没有匹配的文件",noMatchingFilesDescription:"没有文件匹配您当前的搜索或筛选条件。",clearFilters:"清除筛选",printedCount:"已打印 {{count}} 次",uploadedBy:"上传者",deleteFolder:"删除文件夹",deleteFile:"删除文件",deleteFilesCount:"删除 {{count}} 个文件",deleteFolderConfirm:"确定要删除此文件夹吗？其中的所有文件也将被删除。",deleteFileConfirm:"确定要删除此文件吗？",deleteFilesConfirm:"确定要删除 {{count}} 个选中的文件吗？此操作无法撤销。",deleting:"删除中...",noPermissionRenameFolder:"您没有重命名文件夹的权限",noPermissionLinkFolder:"您没有链接文件夹的权限",noPermissionDeleteFolder:"您没有删除文件夹的权限",noPermissionPrint:"您没有打印的权限",noPermissionSlice:"您没有切片文件的权限",noPermissionAddToQueue:"您没有添加到队列的权限",noPermissionDownload:"您没有下载文件的权限",noPermissionRenameFile:"您没有重命名此文件的权限",noPermissionGenerateThumbnail:"您没有生成缩略图的权限",noPermissionDeleteFile:"您没有删除此文件的权限",noPermissionCreateFolder:"您没有创建文件夹的权限",noPermissionUpload:"您没有上传文件的权限",noPermissionMoveFiles:"您没有移动文件的权限",noPermissionDeleteFiles:"您没有删除文件的权限",linkExternal:"链接外部",linkExternalFolder:"链接外部文件夹",linkExternalFolderDescription:"将主机目录（NAS、USB、网络共享）挂载到文件管理器中。文件不会被复制——直接从原始路径访问。",externalFolderNamePlaceholder:"例如：NAS打印文件",externalPath:"主机路径",externalPathHelp:"Docker主机上目录的绝对路径。必须以绑定挂载方式挂载到容器中。",readOnly:"只读",readOnlyHelp:"防止上传和删除",showHiddenFiles:"显示隐藏文件（点文件）",externalFolder:"外部文件夹",scanFolder:"扫描",toast:{folderCreated:"文件夹已创建",folderDeleted:"文件夹已删除",fileDeleted:"文件已删除",filesDeleted:"已删除 {{count}} 个文件",filesMoved:"文件已移动",folderLinked:"文件夹已链接",folderUnlinked:"文件夹已取消链接",externalFolderLinked:"外部文件夹已链接并扫描",folderScanned:"扫描完成：添加 {{added}} 个，移除 {{removed}} 个",addedToQueue:"已将 {{count}} 个文件添加到队列",addedToQueuePartial:"已添加 {{added}} 个文件，{{failed}} 个失败",failedToAddToQueue:"添加文件失败：{{error}}",fileRenamed:"文件已重命名",folderRenamed:"文件夹已重命名",thumbnailsGenerated:"已生成 {{count}} 个缩略图",thumbnailsGeneratedPartial:"已生成 {{succeeded}} 个缩略图，{{failed}} 个失败",noStlMissingThumbnails:"没有缺少缩略图的 STL 文件",failedToGenerateThumbnails:"生成缩略图失败：{{error}}",thumbnailGenerated:"缩略图已生成",failedToGenerateThumbnail:"生成缩略图失败：{{error}}"}},projects:{title:"项目",subtitle:"组织和跟踪您的 3D 打印项目",newProject:"新建项目",editProject:"编辑项目",deleteProject:"删除项目",projectName:"项目名称",description:"描述",noProjects:"暂无项目",noProjectsFiltered:"没有{{status}}项目",noProjectsFilteredHelp:"您没有任何{{status}}项目。当项目状态更改时，它们将出现在这里。",createFirst:"创建您的第一个项目以开始组织相关打印、跟踪进度和管理构建。",createFirstButton:"创建您的第一个项目",create:"创建",files:"文件",prints:"打印",plates:"板",parts:"零件",lastModified:"最后修改",deleteConfirm:"确定要删除此项目吗？归档和队列项目将被取消链接但不会被删除。",addFiles:"添加文件",removeFile:"移除文件",viewDetails:"查看详情",namePlaceholder:"例如：Voron 2.4 构建",descriptionPlaceholder:"可选描述...",urlLabel:"网址",urlPlaceholder:"https://makerworld.com/...",urlInvalid:"网址必须以 http:// 或 https:// 开头",openExternalUrl:"打开项目网址",coverImageLabel:"封面图片",coverImageAlt:"项目封面图片",coverImageUpload:"上传",coverImageReplace:"替换",coverImageRemove:"移除",color:"颜色",targetPlates:"目标板数",targetPlatesPlaceholder:"例如：25",targetPlatesHelp:"打印任务数量",targetParts:"目标零件数",targetPartsPlaceholder:"例如：150",targetPartsHelp:"所需零件总数",tagsLabel:"标签（逗号分隔）",tagsPlaceholder:"例如：voron、功能件、礼物",dueDate:"截止日期",priority:"优先级",priorityLow:"低",priorityNormal:"普通",priorityHigh:"高",priorityUrgent:"紧急",statusActive:"进行中",statusCompleted:"已完成",statusArchived:"已归档",done:"完成",completed:"已完成",failed:"失败",inQueue:"队列中",noPrintsYet:"暂无打印",printJobs:"打印任务（板）",partsPrinted:"已打印零件",failedParts:"失败零件",import:"导入",export:"导出",importProject:"导入项目",exportAll:"导出所有项目",loading:"加载项目中...",noEditPermission:"您没有编辑项目的权限",noDeletePermission:"您没有删除项目的权限",noCreatePermission:"您没有创建项目的权限",noImportPermission:"您没有导入项目的权限",noExportPermission:"您没有导出项目的权限",toast:{created:"项目已创建",updated:"项目已更新",deleted:"项目已删除",imported:"项目已导入",multipleImported:"已导入 {{count}} 个项目",importFailed:"导入失败",exported:"项目已导出（仅元数据）"}},projectDetail:{notFound:"未找到项目",backToProjects:"返回项目",export:"导出",exportProject:"导出项目",noExportPermission:"您没有导出项目的权限",noEditPermission:"您没有编辑项目的权限",partOf:"属于：",priorityLabel:"优先级：",noPrints:"此项目暂无打印",status:{active:"进行中",completed:"已完成",archived:"已归档"},priority:{low:"低",normal:"普通",high:"高",urgent:"紧急"},dueDate:{overdue:"已逾期",today:"今天到期",daysLeft:"还有 {{count}} 天"},progress:{platesProgress:"板进度",partsProgress:"零件进度",printJobs:"打印任务",parts:"零件",percentComplete:"{{percent}}% 完成",remaining:"剩余 {{count}} 个"},stats:{printJobs:"打印任务",total:"总计",failed:"{{count}} 个失败",partsPrinted:"已打印 {{count}} 个零件",printTime:"打印时间",filamentUsed:"耗材用量"},cost:{title:"成本追踪",filamentCost:"耗材成本",energy:"能源",totalCost:"总成本",total:"总计",includesBom:"含物料清单",budget:"预算",remaining:"剩余"},subProjects:{title:"子项目 ({{count}})"},notes:{title:"备注",noEditPermission:"您没有编辑备注的权限",placeholder:"添加关于此项目的备注...",empty:"暂无备注。点击编辑添加备注。"},files:{title:"文件",linkFolders:"从文件管理器链接文件夹",forQuickAccess:"到此项目以便快速访问。",fileCount:"{{count}} 个文件",empty:"未链接文件夹。前往文件管理器将文件夹链接到此项目。",noFiles:"此文件夹中没有文件。",print:"立即打印",addToQueue:"加入队列"},bom:{title:"材料清单",acquired:"已获取 {{completed}}/{{total}}",showAll:"显示全部",hideDone:"隐藏已完成",addPart:"添加零件",noAddPermission:"您没有添加零件的权限",partNamePlaceholder:"零件名称（例如：M3x8 螺丝）",partName:"零件名称",qty:"数量",price:"价格 ({{currency}})",sourcingUrlPlaceholder:"采购链接（可选）",remarksPlaceholder:"备注（可选）",deletePart:"删除零件",deleteConfirm:'确定要删除"{{name}}"吗？',noUpdatePermission:"您没有更新零件的权限",noEditPermission:"您没有编辑零件的权限",noDeletePermission:"您没有删除零件的权限",totalCost:"总成本：",empty:"材料清单中没有零件。添加硬件、电子元件或其他组件以跟踪需要采购的物品。"},timeline:{title:"活动时间线",empty:"暂无活动。"},template:{saveAsTemplate:"保存为模板",noCreatePermission:"您没有创建模板的权限"},queue:{title:"队列",viewAll:"查看全部",printing:"{{count}} 个打印中",queued:"{{count}} 个排队中"},prints:{title:"打印 ({{count}})"},toast:{projectUpdated:"项目已更新",partAdded:"零件已添加",partRemoved:"零件已移除",exportFailed:"导出失败",projectExported:"项目已导出",templateCreated:"模板已创建"}},system:{title:"系统信息",version:"版本",uptime:"运行时间",cpuUsage:"CPU 使用率",memoryUsage:"内存使用率",diskUsage:"磁盘使用率",networkInfo:"网络信息",logs:"日志",debugMode:"调试模式",enableDebug:"启用调试日志",disableDebug:"禁用调试日志",downloadLogs:"下载日志",clearLogs:"清除日志",dockerInfo:"Docker 信息",containerName:"容器名称",imageName:"镜像名称",platform:"平台",architecture:"架构"},library:{title:"耗材库",addFilament:"添加耗材",editFilament:"编辑耗材",deleteFilament:"删除耗材",vendor:"厂商",material:"材料",color:"颜色",kFactor:"K 值",temperature:"温度",noFilaments:"耗材库中没有耗材",deleteConfirm:"确定要删除此耗材吗？",importFromPrinter:"从打印机导入",exportToFile:"导出到文件"},slice:{title:"切片模型",action:"切片",actionAll:"切片全部 {{count}} 个盘面",actionAllTitle:"将所有盘面切片为单个多盘面输出（一个归档）。耗材选择覆盖项目定义的每个槽位。",allPlatesToggle:"切片全部 {{count}} 个盘面",slicing:"切片中…",printer:"打印机配置",process:"工艺配置",filament:"耗材配置",filamentSlot:"耗材 {{index}}（{{type}}）",selectPreset:"— 选择预设 —",loadingPresets:"加载预设中…",analyzingPlateFilaments:"分析打印板耗材中…",analyzingPlateFilamentsHint:"正在运行预览切片以发现此打印板使用的 AMS 插槽。之后会缓存 — 重新打开是即时的。",previewToast:"分析 {{name}} — {{elapsed}}",previewWithProgress:"分析 {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",notUsedByPlate:"— 此打印板未使用",noPresetsForSlot:"无可用预设",otherPrinters:"其他打印机",presetsLoadFailed:"加载预设失败。请先打开设置 → 配置文件以导入。",refreshPresets:"刷新",refreshPresetsTitle:"刷新预设 — 获取最新的云端和打包配置列表（在 Bambu Studio 或 Bambu Handy 中删除预设后使用）",allPresetsRequired:"必须选择所有预设",bundle:"切片器套装",bundleNone:"— 无（单独选择预设）—",bundleAllRequired:"必须选择套装的工艺和每个耗材槽",enqueuing:"提交切片任务中…",queued:"已排队…",failed:"切片失败。请检查切片器 sidecar 日志。",startedToast:"在后台切片 {{name}}…",queuedToast:"已排队：{{name}} — {{elapsed}}",runningToast:"切片 {{name}} — {{elapsed}}",runningWithProgress:"{{name}} – {{stage}} ({{percent}}%) – {{elapsed}}",runningWithProgressMultiPlate:"盘面 {{plateIndex}} / {{plateCount}} • {{name}} – {{stage}} ({{percent}}%) – {{elapsed}}",completedToast:"已切片 {{name}}",failedTitle:"切片失败",failedToast:"切片 {{name}} 失败：{{detail}}",tier:{local:"已导入",cloud:"Bambu Cloud",orcaCloud:"Orca Cloud",standard:"标准"},cloud:{notAuthenticated:"登录 Bambu Cloud（设置 → 配置文件 → Bambu Cloud）以查看云端预设。",expired:"Bambu Cloud 会话已过期 — 请重新登录以刷新云端预设。",unreachable:"目前无法访问 Bambu Cloud。本地和标准预设仍可使用。"},orcaCloud:{notAuthenticated:"登录 Orca Cloud（配置文件 → Orca Cloud）以查看您的 Orca 预设。",expired:"Orca Cloud 会话已过期 — 请重新登录以刷新您的 Orca 预设。",unreachable:"Orca Cloud 当前无法访问。其他预设仍可正常使用。"},bedType:{label:"打印板",auto:"自动（使用工艺预设）",coolPlate:"冷板",coolPlateSuperTack:"Cool Plate SuperTack",engineering:"Engineering Plate",highTemp:"High Temp Plate",texturedPEI:"Textured PEI Plate",smoothPEI:"Smooth PEI Plate"}},spoolman:{title:"Spoolman 集成",enabled:"Spoolman 已启用",url:"Spoolman URL",connected:"已连接",disconnected:"未连接",testConnection:"测试连接",sync:"同步",syncing:"同步中...",lastSync:"上次同步",linkToSpoolman:"链接到 Spoolman",openInSpoolman:"在 Spoolman 中打开",unlinkSpool:"取消链接耗材",unlinkConfirmTitle:"取消分配料盘？",unlinkConfirmMessage:"这将从此插槽中移除料盘。料盘本身的数据将保持不变。",selectSpool:"选择耗材",noUnlinkedSpools:"无未分配的料盘",linkSuccess:"料盘分配成功",linkFailed:"料盘分配失败",unlinkSuccess:"料盘取消分配成功",unlinkFailed:"料盘取消分配失败",linkedSpool:"已分配料盘",spoolId:"耗材 ID",fillSourceLabel:"(Spoolman)",weight:"重量",remaining:"剩余",disableWeightSync:"禁用 AMS 估计重量同步",disableWeightSyncDesc:"不从 AMS 估计值更新剩余容量。如果您更喜欢 Spoolman 的用量追踪而非 AMS 百分比估计，请使用此选项。新耗材仍将使用 AMS 估计值作为初始重量。",reportPartialUsage:"报告失败打印的部分用量",reportPartialUsageDesc:"当打印失败或被取消时，根据层进度报告估计的耗材使用量。"},inventory:{title:"耗材库存",subtitle:"管理您的料盘",spoolmanMixedContentTitle:"Spoolman 无法通过 HTTPS 加载 — 浏览器已阻止混合内容",spoolmanMixedContentBody:"Bambuddy 通过您的反向代理以 HTTPS 提供服务，但您的 Spoolman 地址仍为 HTTP。出于安全考虑，浏览器会阻止混合内容，因此嵌入式 Spoolman 界面无法加载。Spoolman 也必须通过 HTTPS 访问。",spoolmanMixedContentFixReverseProxy:"请将 Spoolman 置于与 Bambuddy 相同的反向代理（Traefik / Nginx / Caddy）之后并启用 HTTPS，然后在设置中将 Spoolman URL 更新为新的 HTTPS 地址。",spoolmanMixedContentFixOpenNewTab:"作为变通方案，可在新标签页中通过 HTTP 打开 Spoolman — 混合内容规则仅适用于嵌入式框架，独立标签页仍可正常使用。",spoolmanOpenInNewTab:"在新标签页中打开 Spoolman",labels:{title:"打印线材标签",selectedCount:"已选 {{count}} 项",pickSpools:"选择要打印标签的线材：",searchPlaceholder:"按名称、品牌或 #ID 搜索",filterByMaterial:"材料：",allMaterials:"全部",selectVisible:"选择所有可见 ({{count}})",deselectVisible:"取消选择可见",clearAll:"全部清除",noSpoolsToShow:"没有要显示的线材。请调整筛选条件后重试。",noMatches:"没有线材符合当前搜索或筛选。",printOne:"打印此线材的标签",printLabels:"打印标签…",bulkTitle:"从当前显示的 {{count}} 个线材中选择要打印标签的",noSpoolsTitle:"没有要打标签的线材",error:"无法生成标签：{{msg}}",sortBy:{label:"排序：",id:"按 ID",color:"按颜色"},templates:{amsHolderSmall:{label:"AMS 支架 — 小 (74 × 33 mm)",hint:"每页一个标签；适配 MakerWorld 模型 752566 (AMS 耗材标签支架) 中可打印的标签。"},amsHolderLarge:{label:"AMS 支架 — 大 (75 × 55 mm)",hint:"每页一个标签；适配 AMS 耗材标签支架的卡片插入款。空间充足，可放置色板、品牌、材料、ID 与二维码。"},box40x30:{label:"盒标签 (40 × 30 mm)",hint:"每页一张；常见的 DK/Brother 卷尺寸，适合给耗材袋和储物盒贴标签。"},box:{label:"Box label (62 × 29 mm)",hint:"每页一个标签；适配 Brother PT/QL 和 Dymo 小标签。"},averyL7160:{label:"Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)",hint:"欧洲规格纸张；每张 A4 页 21 个标签。"},avery5160:{label:"Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)",hint:"美国规格纸张；每张 Letter 页 30 个标签。"}}},addSpool:"添加耗材",editSpool:"编辑耗材",copySpool:"复制耗材",material:"材料",selectMaterial:"选择材料...",subtype:"子类型",brand:"品牌",searchBrand:"搜索品牌...",useCustomBrand:'使用"{{brand}}"',useCustomMaterial:"使用自定义材料：{{material}}",colorName:"颜色名称",colorNamePlaceholder:"翡翠白、烈焰红...",color:"颜色",hexColor:"十六进制颜色",pickColor:"选择自定义颜色",labelWeight:"标签重量",coreWeight:"空盘重量",searchSpoolWeight:"搜索耗材重量...",weightUsed:"已使用",currentWeight:"剩余重量",measuredWeight:"称量重量",spoolName:"线轴",costPerKg:"每公斤成本",storageLocation:"存放位置",storageLocationPlaceholder:"例如：货架A，抽屉1",openInInventory:"在库存中查看",measuredWeightError:"称量重量必须在 {{min}}g 到 {{max}}g 之间。",slicerFilament:"切片耗材",slicerFilamentName:"切片预设名称",slicerPreset:"切片预设",searchPresets:"搜索耗材预设...",selectedPreset:"已选择",noPresetsFound:"未找到预设",tempOverrides:"温度覆盖",note:"备注",notePlaceholder:"关于此耗材的任何备注...",category:"类别",categoryPlaceholder:"例如：生产、原型、客户A",categoryNone:"未分类",storageLocationNone:"未设置位置",lowStockThresholdOverride:"低库存阈值（此料盘）",lowStockThresholdOverrideHelp:"留空以使用全局阈值（{{global}}%）。",clearRfid:"清除 RFID 标签",rfidCleared:"RFID 标签已清除",archive:"归档",restore:"恢复",noSpools:"暂无耗材。添加您的第一个耗材开始使用。",noAvailableSpools:"没有可用的耗材。请先向库存中添加耗材，或从其他槽位取消分配一个耗材。",kProfiles:"K 值配置",addKProfile:"添加 K 值配置",assignSpool:"分配耗材",unassignSpool:"取消分配",assignSuccess:"耗材已分配，AMS 槽位已配置",assignFailed:"分配耗材失败",assignMismatchTitle:"材料不匹配",assignMismatchMessage:'所选线轴材料 "{{spoolMaterial}}" 与 {{location}} 的料槽材料 "{{trayMaterial}}" 不匹配。仍要分配吗？',assignMismatchConfirm:"仍然分配",assignPartialMismatchMessage:'线轴材料 "{{spoolMaterial}}" 与 {{location}} 的 "{{trayMaterial}}" 相近但不完全一致。是否继续？',assignProfileMismatchMessage:'线轴配置 "{{spoolProfile}}" 与 {{location}} 的料槽配置 "{{trayProfile}}" 不一致。是否继续？',assignReconfigureNote:"AMS 槽位将重新配置为使用线轴的配置。",selectSpool:"选择要分配到此槽位的耗材",assigned:"已分配",assigning:"分配中...",searchSpools:"搜索耗材...",showAllSpools:"显示所有耗材",spoolmanSpools:"Spoolman 线轴",allMaterials:"所有材料",filterByBrand:"按品牌筛选...",showArchived:"显示已归档",quickAdd:"快速添加（库存）",quantity:"数量",stock:"库存",configured:"已配置",spoolsCreated:"已创建 {{count}} 个耗材",spoolsPartiallyCreated:"已创建 {{created}} / {{total}} 个耗材（部分失败）",spoolCreated:"耗材已创建",spoolUpdated:"耗材已更新",spoolDeleted:"耗材已删除",deepLinkSpoolNotFound:"未找到耗材",deepLinkFetchFailed:"无法加载耗材 — 请重试",spoolArchived:"耗材已归档",spoolRestored:"耗材已恢复",kProfileSaveFailed:"K值配置文件设置无法保存",syncWeightSpoolNotFound:"未找到耗材 — 可能已被删除",syncWeightSpoolmanUnreachable:"Spoolman 无法访问 — 请稍后再试",syncWeightFailed:"重量同步失败",spoolmanUnreachable:"Spoolman 无法访问 — 请稍后再试",deleteSpoolNotFound:"未找到耗材 — 可能已被删除",deleteFailed:"删除耗材失败",archiveSpoolNotFound:"未找到耗材 — 可能已被删除",archiveFailed:"归档耗材失败",restoreSpoolNotFound:"未找到耗材 — 可能已被删除",restoreFailed:"恢复耗材失败",saveFailed:"保存更改失败",tagClearFailed:"清除标签失败",deleteConfirm:"确定要删除此耗材吗？此操作无法撤销。",archiveConfirm:"确定要归档此耗材吗？",advancedSettings:"高级设置",filamentInfoTab:"耗材信息",paProfileTab:"PA 配置",filamentInfo:"耗材",additional:"附加",loadingPresets:"加载云端预设中...",cloudConnected:"云端已连接",cloudNotConnected:"云端未连接（使用默认值）",recentColors:"最近",searchColors:"搜索颜色...",searchResults:"搜索结果",allColors:"所有颜色",commonColors:"常用颜色",showLess:"显示更少",showAll:"显示全部",noColorsFound:"没有颜色匹配您的搜索",noResults:"未找到匹配项",extraColorsLabel:"附加颜色",extraColorsPlaceholder:"EC984C,#6CD4BC,A66EB9,D87694",extraColorsHint:"粘贴 2 到 8 个十六进制色值,以逗号分隔。将渲染为渐变。",extraColorsInvalid:"已忽略无效的十六进制值:{{tokens}}",colorEffectLabel:"效果",colorEffect:{none:"无",sparkle:"闪光",wood:"木纹",marble:"大理石",glow:"夜光",matte:"哑光",silk:"丝光",galaxy:"星空",rainbow:"彩虹",metal:"金属",translucent:"半透明",gradient:"渐变",dualColor:"双色",triColor:"三色",multicolor:"多色"},selectMaterialFirst:"请先在耗材信息选项卡中选择材料。",noPrintersConfigured:"未配置打印机。添加打印机以使用 PA 配置。",matchingFilter:"匹配",anyBrand:"任何品牌",anyVariant:"任何变体",autoSelect:"自动选择",matches:"匹配",match:"匹配",noMatches:"无匹配",connected:"已连接",offline:"离线",printerOffline:"打印机离线。连接后查看校准配置。",noKProfilesMatch:"没有 K 值配置匹配所选耗材。",leftNozzle:"左喷嘴",rightNozzle:"右喷嘴",profilesSelected:"个校准配置已选择",totalInventory:"总库存",totalConsumed:"总消耗",byMaterial:"按材料",inPrinter:"在打印机中",lowStock:"库存不足",sinceTracking:"自开始追踪",resetConsumedCounter:"重置计数器",resetConsumedCounterTooltip:"将此料盘的已消耗克数计数器清零。剩余重量保持不变。",resetConsumedCounterConfirm:"将此料盘的已消耗克数计数器重置为 0？后续打印将从零开始计数。料盘本身、剩余重量计算和您的设置不会改变。",resetAllConsumedCounters:"重置所有计数器",resetAllConsumedCountersTooltip:"将每个料盘的已消耗克数计数器清零。剩余重量保持不变。",resetAllConsumedCountersConfirm:'将全部 {{count}} 个料盘（含已归档）的已消耗克数计数器重置为 0？这将清空"累计消耗"统计值，后续打印从零开始计数。料盘和剩余重量不会改变。',consumedCounterReset:"计数器已重置",allConsumedCountersReset:"已重置 {{count}} 个料盘的计数器",resetConsumedCounterFailed:"重置计数器失败",loadedInAms:"已装载到 AMS/外置",remaining:"剩余",weightCheck:"重量检查",lastWeighed:"上次称量",neverWeighed:"从未称量",search:"搜索耗材...",showing:"显示",to:"到",of:"共",show:"显示",spools:"个耗材",spool:"个耗材",page:"页",noSpoolsMatch:"未找到结果",noSpoolsMatchDesc:"尝试调整您的搜索或筛选条件。",active:"活跃",archived:"已归档",all:"全部",used:"已使用",new:"新的",clearFilters:"清除筛选",table:"表格",cards:"卡片",net:"净重",groupSimilar:"分组",groupedSpools:"{{count}} 个相同耗材",groupedRows:"行",columns:"列",configureColumns:"配置列",configureColumnsDesc:"拖动以重新排序列或使用箭头。使用眼睛图标切换可见性。",visible:"可见",reset:"重置",cancel:"取消",applyChanges:"应用更改",moveUp:"上移",moveDown:"下移",hideColumn:"隐藏列",showColumn:"显示列",linkToSpool:"链接到耗材",tagLinked:"标签已链接到耗材",tagLinkFailed:"链接标签失败",tagAlreadyLinked:"标签已链接到其他耗材",unknownTag:"检测到未知 RFID 标签",usageHistory:"使用历史",noUsageHistory:"暂无使用记录",printName:"打印名称",weightConsumed:"消耗重量",clearHistory:"清除",historyCleared:"使用历史已清除",fillSourceLabel:"(库存)",lowStockThresholdError:"阈值必须在 0.1 到 99.9 之间",spoolmanFilamentCatalog:"Spoolman 耗材目录",pickFromSpoolmanCatalog:"从 Spoolman 目录选择…",spoolmanFilamentSelected:"已从 Spoolman 目录选择耗材",spoolmanFilamentUnlinked:"已解除耗材目录关联",noSpoolmanFilaments:"Spoolman 目录中未找到耗材",spoolmanFilamentColorSwatch:"耗材颜色",spoolWeightManagedBySpoolman:"空线轴重量在 Spoolman 中按耗材类型管理",spoolmanCatalogLoadFailed:"无法加载 Spoolman 耗材目录"},timelapse:{title:"延时摄影",create:"创建延时摄影",download:"下载",delete:"删除",preview:"预览",frameRate:"帧率",quality:"质量",processing:"处理中...",noTimelapses:"无可用延时摄影"},ams:{title:"AMS",slot:"槽位",empty:"空",emptySlot:"空槽位",slotEmpty:"空",emptySlotReset:"未分配料盘",unknown:"未知",humidity:"湿度",temperature:"温度",filamentType:"耗材类型",filamentColor:"颜色",remaining:"剩余",history:"AMS 历史",noHistory:"无可用历史",configureSlot:"配置槽位",externalSpool:"外置耗材",profile:"配置",kFactor:"K 值",fill:"填充",configure:"配置",used:"已使用",remainingUnit:"剩余"},printModal:{title:"开始打印",selectPrinter:"选择打印机",selectPlate:"选择板",filamentMapping:"耗材映射",totalCost:"总成本：",slotRemainingShort:" - 剩余 {{grams}}g",printSettings:"打印设置",bedLeveling:"热床调平",flowCalibration:"流量校准",vibrationCalibration:"振动校准",layerInspection:"首层检查",timelapse:"延时摄影",startPrint:"开始打印",addToQueue:"添加到队列",cancel:"取消",noPrintersAvailable:"无可用打印机",printerBusy:"打印机忙碌",printerOffline:"打印机离线",sameTypeDifferentColor:"相同类型，不同颜色",filamentTypeNotLoaded:"耗材类型未装载",openCalendar:"打开日历",leftNozzle:"左",rightNozzle:"右",leftNozzleTooltip:"左喷嘴",rightNozzleTooltip:"右喷嘴",filamentOverride:"耗材覆盖",filamentOverrideHint:"可选覆盖用于基于模型的耗材分配。调度器将使用您选择的耗材而不是原始 3MF 值进行匹配。",originalFilament:"原始",overrideWith:"覆盖为",resetToOriginal:"恢复为原始",insufficientFilamentTitle:"耗材不足",insufficientFilamentMessage:"部分已分配线轴的剩余耗材少于本次打印所需：",insufficientFilamentLine:"{{printer}} - {{slot}}：需要 {{required}}g，剩余 {{remaining}}g",printAnyway:"仍然打印",forceColorMatch:"强制颜色匹配",staggerPrinterStarts:"错峰启动打印机",staggerGroupSize:"组大小",staggerInterval:"间隔（分钟）",staggerPreview:"{{printers}} 台打印机 → {{groups}} 个 {{size}} 台的组，每 {{interval}} 分钟启动一次",staggerLastGroup:"最后一组：{{count}}",staggerTotal:"共 {{minutes}} 分钟",staggerToPrinters:"分批发送到 {{count}} 台打印机",gcodeInjection:"注入自动打印G-code"},backup:{includesEncryptionKey:"本地备份包含 MFA 加密密钥文件（DATA_DIR/.mfa_encryption_key），因此备份 ZIP 是自包含的。请将 ZIP 视为敏感文件 — 任何拥有该文件的人都可以解密内部存储的 OIDC 客户端密钥和 TOTP 密钥。",title:"备份与恢复",createBackup:"创建备份",restoreBackup:"恢复备份",restoreDescription:"从备份文件替换所有数据",downloadBackup:"下载备份",uploadBackup:"上传备份",lastBackup:"上次备份",autoBackup:"自动备份",backupNow:"立即备份",restoreWarning:"警告：恢复备份将覆盖所有当前数据。",includeArchives:"包含归档",includeSettings:"包含设置",includeProfiles:"包含配置文件",backupSuccess:"备份创建成功",restoreSuccess:"备份恢复成功",backupFailed:"备份失败",restoreFailed:"恢复失败",restoreNote:"恢复期间虚拟打印机将停止",githubBackup:"GitHub 备份",enabled:"已启用",cloudLoginRequired:"需要登录 Bambu Cloud。请在 配置文件 → 云配置文件 中登录以启用 GitHub 备份。",cloudLoginRequiredShort:"需要Cloud登录",githubDescription:"自动将您的配置文件同步到私有 GitHub 仓库以进行备份和版本历史记录。",repoIsPrivate:"仓库为私有 — 可以安全备份。",repoIsPublicWarning:"仓库为公开（PUBLIC）。Bambuddy 备份包含 MQTT 凭据、Home Assistant 令牌、Prometheus 令牌、您的 Bambu Cloud 邮箱以及通过 K-profile 暴露的打印机访问代码。在您于提供商设置中将仓库改为私有之前，保存将被阻止。",repoVisibilityUnknown:"无法确定仓库的可见性。Bambuddy 拒绝向任何未确认为私有的目标进行备份；保存将被阻止。",repositoryUrl:"仓库 URL",repoUrlPlaceholderGitHub:"https://github.com/username/repo-name",repoUrlPlaceholderGitea:"https://gitea.example.com/username/repo-name",repoUrlPlaceholderForgejo:"https://forgejo.example.com/username/repo-name",repoUrlPlaceholderGitLab:"https://gitlab.com/username/repo-name",allowInsecureHttp:"允许不安全的 HTTP",allowInsecureHttpHint:"为无 TLS 的私有网络自托管实例启用",personalAccessToken:"个人访问令牌",tokenSaved:"（已保存）",enterNewToken:"输入新令牌以更新",tokenHint:"具有内容读写权限的细粒度令牌",branch:"分支",provider:"Git 提供商",providerGitHub:"GitHub",providerGitLab:"GitLab",providerGitea:"Gitea",providerForgejo:"Forgejo",manualOnly:"仅手动",hourly:"每小时",daily:"每天",weekly:"每周",includeInBackup:"包含在备份中",kProfiles:"K 配置文件",kProfilesDescription:"来自已连接打印机的压力推进校准",noPrintersConnected:"没有打印机连接",printersConnected:"{{connected}}/{{total}} 已连接",cloudProfiles:"云配置文件",cloudProfilesDescription:"来自 Bambu Cloud 的耗材、打印机和工艺预设",appSettings:"应用设置",appSettingsDescription:"Bambuddy 配置（完整数据库）",spoolInventory:"耗材库存",spoolInventoryDescription:"耗材卷轴、使用记录和成本追踪",printArchives:"打印档案",printArchivesDescription:"打印历史元数据（不含 gcode/3MF 文件）",lastBackupAt:"上次备份：",noBackupsYet:"尚无备份",next:"下次：",startingBackup:"正在启动备份...",test:"测试",enableBackup:"启用备份",testConnection:"测试连接",enterRepoUrl:"请输入仓库 URL",enterRepoAndToken:"请输入仓库 URL 和访问令牌",repoRequired:"仓库 URL 为必填项",tokenRequired:"访问令牌为必填项",githubBackupEnabled:"GitHub 备份已启用",tokenUpdated:"令牌已更新",settingsSaved:"设置已保存",failedToSave:"保存失败：{{message}}",backupCompleteFiles:"备份完成 - {{count}} 个文件已更新",backupSkippedNoChanges:"备份已跳过 - 无更改",backupFailed2:"备份失败：{{message}}",clearedLogs:"已清除 {{count}} 条日志",failedToClearLogs:"清除日志失败：{{message}}",history:"历史记录",clear:"清除",date:"日期",status:"状态",commit:"提交",localBackup:"本地备份",localBackupDescription:"创建 Bambuddy 数据的完整备份，包括数据库、档案、上传和所有文件。",downloadBackupLabel:"下载备份",completeBackupZip:"完整备份：数据库 + 所有文件（ZIP）",download:"下载",preparingBackup:"正在准备备份...",creatingArchive:"正在创建备份归档...对于大型归档可能需要一些时间。",downloadingFile:"正在下载备份文件...",backupDownloaded:"备份下载成功",failedToCreateBackup:"创建备份失败：{{message}}",restore:"恢复",restoreReplacesAll:"恢复将替换所有数据。",restoreReplacesAllDetail:"您当前的数据库和文件将被完全替换。恢复后需要重启。",restoreConfirmTitle:"恢复备份",restoreConfirmMessage:'您确定要从"{{filename}}"恢复吗？这将完全替换您当前的数据库和所有文件。恢复后需要重启应用程序。',restoreConfirmButton:"恢复备份",uploadingFile:"正在上传备份文件...",backupRestoredRestart:"备份已恢复。请重启 Bambuddy。",failedToRestore:"恢复备份失败。请检查文件格式。",reloadNow:"立即重新加载",creatingBackup:"正在创建备份",restoringBackup:"正在恢复备份",preparing:"准备中...",processing:"处理中...",doNotClosePage:"请不要关闭此页面或导航离开。对于大型备份，此操作可能需要几分钟。",restoring:"恢复中...",restoreComplete:"恢复完成",restoreFailed2:"恢复失败",importSettings:"从备份文件导入设置",pleaseWaitRestoring:"请等待数据恢复中",selectBackupFile:"点击选择备份文件（.json 或 .zip）",duplicateHandling:"重复项处理方式：",matchPrinters:"打印机",matchPrintersBy:"按序列号匹配",matchSmartPlugs:"智能插座",matchSmartPlugsBy:"按 IP 地址匹配",matchNotificationProviders:"通知提供者",matchNotificationProvidersBy:"按名称匹配",matchFilaments:"耗材",matchFilamentsBy:"按名称 + 类型 + 品牌匹配",matchArchives:"档案",matchArchivesBy:"按内容哈希匹配（始终跳过）",matchPendingUploads:"待上传",matchPendingUploadsBy:"按文件名匹配",matchSettingsTemplates:"设置和模板",matchSettingsTemplatesBy:"始终覆盖",replaceExisting:"替换现有数据",keepExisting:"保留现有数据",overwriteDescription:"用备份数据覆盖已存在的项目",keepDescription:"仅恢复尚不存在的项目",overwriteCaution:"注意：",overwriteWarning:"覆盖将用备份数据替换您当前的配置。出于安全考虑，打印机访问代码永远不会被覆盖。",cancel:"取消",processingBackup:"正在处理备份文件...",itemsRestored:"已恢复项目",itemsSkipped:"已跳过项目",restored:"已恢复",skippedAlreadyExist:"已跳过（已存在）",filesCategory:"文件（3MF、缩略图等）",andMore:"...还有 {{count}} 项",newApiKeysGenerated:"已生成新的 API 密钥",keysShownOnce:"这些密钥仅显示一次。请立即复制！",copy:"复制",noDataFound:"在备份文件中未找到可恢复的数据。",close:"关闭",scheduledBackup:"定时备份",scheduledBackupDescription:"按计划自动创建备份快照。输出目录可以挂载到 NAS 或外部存储。",frequency:"频率",backupTime:"时间",retention:"保留",retentionDescription:"保留备份数量",outputPath:"输出路径",outputPathPlaceholder:"默认：{{path}}",outputPathDescription:"留空以使用默认位置",runNow:"立即运行",backupFiles:"备份文件",noScheduledBackups:"暂无备份",deleteBackup:"删除",deleteBackupConfirm:"删除此备份文件？",backupRunning:"备份中...",scheduledBackupComplete:"备份成功完成",scheduledBackupFailed:"备份失败",nextBackup:"下次备份",backupSize:"大小",localTimeHint:"本地时间 ({{tz}})",defaultPathLabel:"默认：",categories:{settings:"设置",notification_providers:"通知提供者",notification_templates:"通知模板",smart_plugs:"智能插座",printers:"打印机",filaments:"耗材",maintenance_types:"维护类型",archives:"档案",projects:"项目",pending_uploads:"待上传",external_links:"外部链接",api_keys:"API 密钥"}},tags:{title:"标签",addTag:"添加标签",editTag:"编辑标签",deleteTag:"删除标签",tagName:"标签名称",tagColor:"标签颜色",noTags:"无标签",deleteConfirm:"确定要删除此标签吗？",manageTags:"管理标签"},uploadModal:{title:"上传 3MF 文件",dragDrop:"将 .3mf 文件拖放到此处",or:"或",browseFiles:"浏览文件",extractionInfo:"将从 3MF 文件元数据中自动提取打印机型号。",uploaded:"已上传",failed:"失败",uploading:"上传中...",upload:"上传",uploadFailed:"上传失败"},editArchive:{title:"编辑归档",name:"名称",namePlaceholder:"打印名称",printer:"打印机",noPrinter:"无打印机",project:"项目",noProject:"无项目",itemsPrinted:"打印数量",itemsPrintedHelp:"此打印任务中生产的物品数量",notes:"备注",notesPlaceholder:"添加关于此打印的备注...",externalLink:"外部链接",externalLinkPlaceholder:"https://printables.com/model/...",externalLinkHelp:"链接到 Printables、Thingiverse 或其他来源",tags:"标签",tagsPlaceholder:"添加标签...",addMoreTags:"添加更多标签...",matchingTags:'匹配"{{query}}"',existingTags:"现有标签",clickToAdd:"（点击添加）",status:"状态",failureReason:"失败原因",selectReason:"选择原因...",photos:"打印成品照片",photosHelp:"点击 + 添加打印成品照片",printResult:"打印成品",saving:"保存中...",failureReasons:{adhesionFailure:"附着力失败",spaghettiDetached:"拉丝 / 脱落",layerShift:"层偏移",cloggedNozzle:"喷嘴堵塞",filamentRunout:"耗材用完",warping:"翘曲",stringing:"拉丝",underExtrusion:"挤出不足",powerFailure:"断电",userCancelled:"用户取消",other:"其他"},statuses:{completed:"已完成",failed:"失败",aborted:"已取消",printing:"打印中"}},kProfiles:{title:"K 值配置",noPrintersConfigured:"未配置打印机",addPrinterInSettings:"在设置中添加打印机以管理 K 值配置",noActivePrinters:"无活跃打印机",enablePrinterConnection:"启用打印机连接以查看其 K 值配置",loadingProfiles:"加载 K 值配置中...",printerOffline:"打印机离线",printerOfflineDesc:"所选打印机未连接。开启电源以查看 K 值配置。",noMatchingProfiles:"无匹配的配置",noMatchingProfilesDesc:"没有配置匹配您的搜索条件",noKProfiles:"无 K 值配置",noKProfilesDesc:"未找到 {{diameter}}mm 喷嘴的压力推进配置",createFirstProfile:"创建第一个配置",printer:"打印机",nozzle:"喷嘴",refresh:"刷新",addProfile:"添加配置",export:"导出",import:"导入",select:"选择",selectAll:"全选",delete:"删除",searchPlaceholder:"按名称或耗材搜索...",allExtruders:"所有挤出机",leftOnly:"仅左侧",rightOnly:"仅右侧",allFlow:"所有流量",hfOnly:"仅高流量",sOnly:"仅标准",sortName:"排序：名称",sortKValue:"排序：K 值",sortFilament:"排序：耗材",leftExtruder:"左挤出机",rightExtruder:"右挤出机",modal:{addTitle:"添加 K 值配置",editTitle:"编辑 K 值配置",profileName:"配置名称",profileNamePlaceholder:"我的 PLA 配置",kValue:"K 值",kValuePlaceholder:"0.020",kValueHelp:"典型范围：PLA 0.01 - 0.06，PETG 0.02 - 0.10",filament:"耗材",selectFilament:"选择耗材...",noFilamentsHelp:"未找到耗材。请先在 Bambu Studio 中创建 K 值配置。",flowType:"流量类型",highFlow:"高流量",standard:"标准",nozzleSize:"喷嘴尺寸",extruder:"挤出机",extruders:"挤出机",left:"左",right:"右",notes:"备注（本地存储）",notesPlaceholder:"添加关于此配置的备注...",notesHelp:"备注保存在 Bambuddy 中，不在打印机上",syncing:"与打印机同步中...",savingExtruder:"保存到挤出机 {{current}}/{{total}}...",pleaseWait:"请稍候"},deleteConfirm:{title:"删除配置",cannotUndo:"此操作无法撤销",message:'确定要从打印机删除"{{name}}"吗？'},bulkDelete:{title:"删除配置",cannotUndo:"此操作无法撤销",message:"确定要从打印机删除 {{count}} 个选中的配置吗？"},toast:{profileSaved:"K 值配置已保存",profilesSaved:"K 值配置已保存到 {{count}} 个挤出机",selectAtLeastOneExtruder:"请至少选择一个挤出机",profileDeleted:"K 值配置已删除",profilesDeleted:"已删除 {{count}} 个配置",exportedProfiles:"已导出 {{count}} 个配置",importedProfiles:"已导入 {{count}} / {{total}} 个配置",noProfilesToExport:"无可导出的配置",invalidFileFormat:"无效的文件格式",failedToParseImport:"解析导入文件失败",failedToSaveBatch:"批量保存 K 值配置失败",noteSaved:"备注已保存",failedToSaveNote:"保存备注失败"},permission:{noRead:"您没有刷新配置的权限",noCreate:"您没有添加配置的权限",noUpdate:"您没有更新 K 值配置的权限",noDelete:"您没有删除 K 值配置的权限",noExport:"您没有导出配置的权限",noImport:"您没有导入配置的权限"}},virtualPrinter:{title:"虚拟打印机",running:"运行中",stopped:"已停止",description:{default:"启用虚拟打印机，使其在 Bambu Studio 和 OrcaSlicer 中可见。发送到此打印机的文件将直接归档而不打印。",proxy:"启用代理，将切片软件流量中继到真实打印机，允许在任何网络上远程打印。"},enable:{title:"启用虚拟打印机",visibleInSlicer:'在切片软件发现中显示为"Bambuddy"',proxyingTo:"代理到 {{name}}",notActive:"未激活"},model:{title:"打印机型号",description:"选择要模拟的打印机型号。",restartWarning:"更改型号将重启虚拟打印机"},accessCode:{title:"访问码",isSet:"访问码已设置",notSet:"未设置访问码 - 需要设置才能启用",placeholder:"输入 8 位字符代码",placeholderChange:"输入新代码以更改",hint:"必须恰好 8 个字符。切片软件使用此代码进行认证。",charCount:"({{count}}/8)"},targetPrinter:{title:"目标打印机",configured:"代理目标已配置",notConfigured:"未选择目标打印机 - 代理模式需要设置",placeholder:"选择打印机...",hint:"选择要将切片软件流量代理到的打印机。打印机必须处于局域网模式。",noPrinters:"未配置打印机。请先添加打印机以使用代理模式。"},remoteInterface:{title:"网络接口覆盖",configured:"接口覆盖已激活",optional:"可选 - 当自动检测的 IP 不正确时使用（例如多网卡、Docker、VPN）",placeholder:"自动检测（默认）...",hint:"覆盖通过 SSDP 广播并在 TLS 证书中使用的 IP 地址。在 Bambuddy 有多个网络接口时很有用。"},mode:{title:"模式",archive:"归档",archiveDesc:"立即归档文件",review:"审核",reviewDesc:"归档前审核",queue:"队列",queueDesc:"归档并添加到队列",proxy:"代理",proxyDesc:"中继到真实打印机"},autoDispatch:{title:"自动派发",description:"添加到队列时自动开始打印。关闭后，打印任务等待手动派发。"},queueForceColorMatch:{title:"强制颜色匹配",description:"拒绝派发到没有完全相同耗材类型和颜色的打印机。默认关闭 — 不启用时，队列仅按型号匹配，可能选到颜色错误的打印机。"},tailscaleDisabled:{title:"Tailscale 集成",description:"启用以将此 VP 标记为通过 Tailscale 公开。显示主机的 Tailscale 地址，以便您知道要粘贴到切片器中的 IP。CA 导入步骤保持不变 — 此开关对证书无影响。"},setupRequired:{title:"需要设置",description:"虚拟打印机功能需要额外的系统配置才能工作。包括端口转发、防火墙规则和平台特定设置。",readGuide:"启用前请阅读设置指南"},archiveNameSource:{title:"存档名称来源",description:'选择通过虚拟打印机接收文件时新存档的命名方式。"元数据"使用 3MF 中嵌入的切片标题（默认）。"文件名"使用 Bambu Studio 通过 FTP 发送的文件名 — 当您在"发送到打印机"对话框中重命名作业时非常有用。',metadata:"元数据",filename:"文件名"},caCert:{title:"切片软件证书",description:"虚拟打印机使用由 Bambuddy CA 签发的 TLS 证书。将此 CA 证书导入切片软件的信任库一次，切片软件即可接受连接 — 无需再通过命令行获取。",copy:"复制",copied:"已复制",download:"下载",fingerprint:"SHA-256"},howItWorks:{title:"工作原理",step1:"在同一局域网中，虚拟打印机会通过发现机制自动出现在您的切片软件（Bambu Studio / OrcaSlicer）中。从其他网络，通过 IP 地址和访问码手动添加。",step2:'在归档、审核和队列模式下，使用切片软件中的"发送"按钮将 3MF 文件上传到 Bambuddy。切片软件会显示"打印成功"— 文件已存储，未打印。',step3:"在代理模式下，虚拟打印机将所有流量中继到真实打印机 — 打印会立即开始，就像直接连接一样。"},status:{title:"状态详情",printerName:"打印机名称",model:"型号",serialNumber:"序列号",mode:"模式",pendingFiles:"待处理文件",targetPrinter:"目标打印机",ftpPort:"FTP 端口",mqttPort:"MQTT 端口",ftpConnections:"FTP 连接",mqttConnections:"MQTT 连接"},toast:{updated:"虚拟打印机设置已更新",failedToUpdate:"更新设置失败",copyFailed:"复制失败 — 请手动选中文本",accessCodeRequired:"请先设置访问码",targetPrinterRequired:"请先选择目标打印机",bindIpRequired:"请先设置绑定 IP",accessCodeEmpty:"访问码不能为空",accessCodeLength:"访问码必须恰好 8 个字符",created:"虚拟打印机已创建",failedToCreate:"创建虚拟打印机失败",deleted:"虚拟打印机已删除",failedToDelete:"删除虚拟打印机失败"},list:{title:"虚拟打印机",add:"添加",addFirst:"添加虚拟打印机",empty:"未配置虚拟打印机。添加一个以开始使用。"},bindIp:{title:"绑定接口",placeholder:"选择接口...",hint:"此虚拟打印机绑定的网络接口。每台打印机必须唯一。"},proxy:{accessCodeHint:"在代理模式下，在切片软件中使用目标打印机的访问码。连接会透明转发到真实打印机。"},addDialog:{title:"添加虚拟打印机",name:"名称",hint:"创建后可以配置访问码、目标打印机和其他设置。",create:"创建"},deleteConfirm:{title:"删除虚拟打印机",message:'确定要删除"{{name}}"吗？这将停止此打印机的所有服务。'}},modelViewer:{openInSlicer:"在切片软件中打开",tabs:{model:"3D 模型",gcode:"G-code 预览"},notAvailable:"不可用",notSliced:"未切片",plates:"板",allPlates:"所有板",plateNumber:"板 {{number}}",plateCount:"{{count}} 个板",plateCount_other:"{{count}} 个板",objectCount:"{{count}} 个对象",objectCount_other:"{{count}} 个对象",filamentCount:"{{count}} 种耗材",filamentCount_other:"{{count}} 种耗材",eta:"预计 {{minutes}} 分钟",noPreview:"此文件无可用预览",pagination:{pageOf:"第 {{current}} / {{total}} 页",prev:"上一页",next:"下一页"},errors:{failedToLoad:"加载文件失败",noMeshes:"3MF 文件中未找到网格",unsupportedFormat:"不支持的文件格式"}},maintenanceDescriptions:{lubricateCarbonRods:"在碳纤维杆上涂抹润滑剂以确保顺畅运动",lubricateRails:"在线性导轨上涂抹润滑剂以确保顺畅运动",cleanNozzle:"清洁热端和喷嘴以防止堵塞",checkBelts:"检查皮带张力以确保打印精度",cleanBuildPlate:"清洁构建板以获得更好的附着力",checkExtruder:"检查挤出机齿轮磨损情况",checkCooling:"确保冷却风扇正常工作",generalInspection:"打印机综合检查",cleanCarbonRods:"清洁碳纤维杆以减少摩擦",lubricateSteelRods:"在钢杆上涂抹润滑剂以确保顺畅运动",cleanSteelRods:"清洁钢杆以减少摩擦",cleanLinearRails:"擦拭线性导轨以清除灰尘和碎屑",checkPtfeTube:"检查 PTFE 管的磨损或损坏",replaceHepaFilter:"更换 HEPA 过滤器以保证空气质量",replaceCarbonFilter:"更换活性炭过滤器",lubricateLeftNozzleRail:"润滑左喷嘴导轨（H2 系列）"},smartPlugs:{offline:"离线",admin:"管理",openPlugAdminPage:"打开插座管理页面",deleteSmartPlug:"删除智能插座",turnOnSmartPlug:"开启智能插座",turnOffSmartPlug:"关闭智能插座",turnOn:"开启",turnOff:"关闭",addSmartPlug:{scanningNetwork:"扫描网络中...",chooseEntity:"选择实体...",connectionFailed:"连接失败",searchEntities:"搜索实体...",searchPowerSensors:"搜索功率传感器...",searchEnergySensors:"搜索能量传感器...",placeholders:{plugName:"客厅插座",mqttStateOnValue:"ON、true、1",mqttSameAsPower:"与功率主题相同，或不同"}},linkedTo:"关联到：",monitorOnly:"仅监控",alerts:"警报",scheduleOn:"开启 {{time}}",scheduleOff:"关闭 {{time}}",on:"开启",off:"关闭",power:"功率",kwhToday:"今日kWh",settings:"设置",automationSettings:"自动化设置",showInSwitchbar:"在开关栏显示",quickAccessSidebar:"从侧边栏快速访问",enabled:"已启用",enableAutomation:"为此插座启用自动化",autoOn:"自动开启",autoOnDescription:"打印开始时开启",autoOff:"自动关闭",autoOffDescription:"打印完成时关闭（一次性）",autoOffPersistent:"保持启用",autoOffPersistentDescription:"在打印之间保持启用而非一次性",autoOffAfterDrying:"干燥完成后自动关闭",autoOffAfterDryingDescription:"AMS 干燥完成后关闭",delayAfterDryingMinutes:"干燥后延迟（分钟）",turnOffDelayMode:"关闭延迟模式",time:"时间",temp:"温度",delayMinutes:"延迟（分钟）",tempThreshold:"温度阈值（°C）",tempThresholdDescription:"当喷嘴冷却到此温度以下时关闭",edit:"编辑",deleteConfirm:'确定要删除"{{name}}"吗？此操作无法撤销。',turnOnConfirm:'确定要开启"{{name}}"吗？',turnOffConfirm:'确定要关闭"{{name}}"吗？这将切断连接设备的电源。',failedToTurn:'无法{{action}}"{{name}}"',unknown:"未知",addTitle:"添加智能插座",editTitle:"编辑智能插座",stopScanning:"停止扫描",discoverTasmota:"发现Tasmota设备",foundDevices:"找到{{count}}个设备 - 点击选择：",noDevicesFound:"未在您的网络中找到Tasmota设备",haNotConfigured:"Home Assistant未配置。请在以下位置设置",haSettingsPath:"设置 → 网络 → Home Assistant",selectEntity:"选择实体 *",ipAddress:"IP地址 *",nameLabel:"名称 *",username:"用户名",password:"密码",authHint:"如果您的Tasmota设备不需要认证，请留空",linkToPrinter:"关联打印机",noPrinter:"无打印机（仅手动控制）",linkingDescription:"关联后可在打印开始/完成时自动开关",powerAlerts:"功率警报",alertAbove:"高于时警报（W）",alertBelow:"低于时警报（W）",alertDescription:"当电力消耗超过这些阈值时收到通知。留空以禁用该方向。",dailySchedule:"每日计划",turnOnAt:"开启时间",turnOffAt:"关闭时间",scheduleDescription:"每天在这些时间自动开关插座。留空以跳过该操作。",showOnPrinterCard:"在打印机卡片上显示",displayOnPrinterCard:"在打印机卡片上显示按钮",connectedResult:"已连接！",deviceLabel:"设备：{{name}} - ",stateLabel:"状态：{{state}}",test:"测试",delete:"删除",save:"保存",add:"添加",cancel:"取消",failedToStartScan:"无法开始扫描",nameRequired:"名称为必填项",entityRequired:"Home Assistant插座需要实体",mqttTopicRequired:"必须为功率、能源或状态监控配置至少一个MQTT主题",loadingEntities:"正在加载实体...",loading:"加载中...",failedToLoadEntities:"加载实体失败：{{error}}",noEntitiesMatching:'未找到匹配"{{search}}"的实体',noEntitiesAvailable:"无可用实体",searchingEntities:"搜索所有实体（找到{{count}}个）",showingEntities:"显示 switch、light、input_boolean（{{count}}个可用）",energyMonitoringOptional:"能源监控（可选）",energyMonitoringHint:"搜索并选择提供功率/能源数据的传感器。",powerSensorW:"功率传感器（W）",energyTodayKwh:"今日能源（kWh）",totalEnergyKwh:"总能源（kWh）",noMatchingSensors:"无匹配的传感器",none:"无",mqttNotConfigured:"MQTT代理未配置。请在以下位置设置代理地址",mqttSettingsPath:"设置 → 网络 → MQTT发布",mqttNotConfiguredSuffix:"（您不需要启用发布，只需填写代理详细信息）。",mqttMonitorOnlyDescription:"MQTT插座通过MQTT订阅接收功率/能源数据。开关控制不可用 - 请使用您的MQTT代理或家庭自动化系统。",powerMonitoring:"功率监控",energyMonitoring:"能源监控",stateMonitoring:"状态监控",optional:"可选",topic:"主题",jsonPath:"JSON路径",multiplier:"乘数",onValue:"ON值",mqttPowerHint:`JSON路径从JSON负载中提取值（例如"power_l1"）。如果主题发布原始数值，请留空。
 乘数：mW→W使用0.001，kW→W使用1000。`,mqttEnergyHint:`JSON路径从JSON负载中提取值。原始值请留空。
 乘数：Wh→kWh使用0.001，MWh→kWh使用1000。`,mqttStateHint:`JSON路径从JSON负载中提取值。原始值请留空。
-ON值：表示"ON"的确切字符串。留空以自动检测（ON、true、1）。`,restControl:"控制",restOnUrl:"开启 URL",restOffUrl:"关闭 URL",restOnBody:"开启请求体",restOffBody:"关闭请求体",restMethod:"HTTP 方法",restHeaders:"Custom Headers (JSON)",restStatusUrl:"状态 URL",restStatusPath:"状态 JSON 路径",restStatusOnValue:"开启值",restPowerUrl:"功率URL",restPowerPath:"功率 JSON 路径",restPowerMultiplier:"功率乘数",restEnergyUrl:"能耗URL",restEnergyPath:"能耗 JSON 路径",restEnergyMultiplier:"能耗乘数",restUrlRequired:"REST 插座至少需要一个 URL（ON 或 OFF）",restHeadersHint:'例如 {"Authorization": "Bearer your-token"}',restBodyHint:'例如 ON, {"state": "on"}',restStatusHint:"轮询当前状态的 URL",restPathHint:"例如 state 或 data.power.status",restPowerUrlHint:"功率数据的独立URL（留空则使用状态URL）",restEnergyUrlHint:"能耗数据的独立URL（留空则使用状态URL）",restEnergyHint:"每个值可以使用独立的URL，或回退到状态URL。使用乘数进行单位转换（例如：0.001 将 Wh 转换为 kWh）。",testConnection:"测试连接",connectionSuccess:"连接成功",noSwitchesInSwitchbar:"开关栏中没有开关",enableSwitchbarHint:'在设置 > 智能插座中启用"在开关栏显示"'},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"电子邮件",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"SMTP 电子邮件通知",telegram:"通过 Telegram 机器人发送通知",discord:"通过 Webhook 发送到 Discord 频道",ntfy:"免费、可自托管的推送通知",pushover:"简单、可靠的推送通知",callmebot:"通过 CallMeBot 免费发送 WhatsApp 通知",webhook:"通用 HTTP POST 到任意 URL",homeassistant:"Home Assistant 仪表板中的持久通知"},lastSuccess:"上次：{{date}}",error:"错误",printer:"打印机：",allPrinters:"所有打印机",sendTestNotification:"发送测试通知",eventSettings:"事件设置",enabled:"已启用",sendFromProvider:"从此提供商发送通知",printEvents:"打印事件",printerStatus:"打印机状态",amsAlarms:"AMS 警报",amsHtAlarms:"AMS-HT 警报",printQueue:"打印队列",start:"开始",plateCheck:"热床检测",complete:"完成",failed:"失败",stopped:"已停止",progress:"进度",offline:"离线",lowFilament:"耗材不足",maintenance:"维护",amsHumidity:"AMS 湿度",amsTemp:"AMS 温度",amsHtHumidity:"AMS-HT 湿度",amsHtTemp:"AMS-HT 温度",bedCooled:"热床已冷却",firstLayer:"首层完成",quiet:"免打扰",digest:"摘要 {{time}}",printStarted:"打印已开始",plateNotEmpty:"热床非空",plateNotEmptyDescription:"打印前检测到物体",printCompleted:"打印已完成",bedCooledLabel:"热床已冷却",bedCooledDescription:"打印后热床温度降至阈值以下",firstLayerCompleteLabel:"首层打印完成",firstLayerCompleteDescription:"首层完成时发送带照片的通知",missingSpoolAssignmentLabel:"缺少料卷分配",missingSpoolAssignmentDescription:"当打印开始且所需料盘没有分配料卷时发送通知",printFailed:"打印失败",printStopped:"打印已停止",progressMilestones:"进度里程碑",progressMilestonesDescription:"在 25%、50%、75% 时通知",printerOffline:"打印机离线",printerError:"打印机错误",lowFilamentLabel:"耗材不足",maintenanceDue:"需要维护",maintenanceDueDescription:"需要维护时通知",amsHumidityHigh:"AMS 湿度过高",amsHumidityHighDescription:"普通 AMS 湿度超过阈值",amsTemperatureHigh:"AMS 温度过高",amsTemperatureHighDescription:"普通 AMS 温度超过阈值",amsHtHumidityHigh:"AMS-HT 湿度过高",amsHtHumidityHighDescription:"AMS-HT 湿度超过阈值",amsHtTemperatureHigh:"AMS-HT 温度过高",amsHtTemperatureHighDescription:"AMS-HT 温度超过阈值",inventoryAlerts:"库存警报",stockReorderAlert:"补货警报",stockReorderAlertDescription:"SKU 已达到补货点",stockBreakAlert:"断货警报",stockBreakAlertDescription:"库存将在补货到达前耗尽",jobAdded:"任务已添加",jobAddedDescription:"任务已添加到队列",jobAssigned:"任务已分配",jobAssignedDescription:"基于模型的任务已分配给打印机",jobStarted:"任务已开始",jobStartedDescription:"队列任务已开始打印",jobWaiting:"任务等待中",jobWaitingDescription:"任务正在等待耗材或打印机",jobSkipped:"任务已跳过",jobSkippedDescription:"任务已跳过（上一个失败）",jobFailed:"任务失败",jobFailedDescription:"任务启动失败",queueComplete:"队列已完成",queueCompleteDescription:"所有队列任务已完成",quietHours:"免打扰时段",noNotificationsDuring:"在此时段内不发送通知",editProviderToChangeQuietHours:"编辑提供商以更改免打扰时段",dailyDigest:"每日摘要",batchNotifications:"将通知汇总为每日摘要",sendAt:"发送于 {{time}}",editProviderToChangeDigestTime:"编辑提供商以更改摘要时间",edit:"编辑",deleteProvider:"删除通知提供商",deleteConfirm:'确定要删除"{{name}}"吗？此操作无法撤销。',delete:"删除",addTitle:"添加通知提供商",editTitle:"编辑通知提供商",nameLabel:"名称 *",namePlaceholder:"我的通知",providerTypeLabel:"提供商类型 *",configuration:"配置",testConfiguration:"测试配置",printerFilter:"打印机筛选",onlyFromPrinter:"仅发送来自此打印机的事件通知",quietHoursDnd:"免打扰时段",quietStart:"开始",quietEnd:"结束",dailyDigestLabel:"每日摘要",sendDigestAt:"发送摘要于",digestCollected:"事件将被收集并在此时间作为单条摘要发送",notificationEvents:"通知事件",progressPercent:"（25%、50%、75%）",bedCooledAfterPrint:"（打印完成后）",eventPriority:{sectionTitle:"ntfy 优先级",helpNtfy:"为每个已启用的事件选择优先级。ntfy 使用它来升级提醒（声音、可见性、推送行为）。此处未设置的级别将使用 ntfy 服务器默认值。",min:"最低",low:"低",default:"默认",high:"高",urgent:"紧急"},cancel:"取消",save:"保存",add:"添加",nameRequired:"名称为必填项",fieldRequired:"{{field}}为必填项",phoneNumber:"电话号码",apiKey:"API 密钥",serverUrl:"服务器 URL",topic:"主题",authToken:"认证令牌",userKey:"用户密钥",appToken:"应用令牌",priority:"优先级",botToken:"机器人令牌",chatId:"聊天 ID",smtpServer:"SMTP 服务器",smtpPort:"SMTP 端口",security:"安全",authentication:"认证",username:"用户名",password:"密码",fromEmail:"发件人邮箱",toEmail:"收件人邮箱",webhookUrl:"Webhook URL",payloadFormat:"负载格式",authorization:"授权",titleFieldName:"标题字段名",messageFieldName:"消息字段名",editTemplate:"编辑模板：{{name}}",titleLabel:"标题",bodyLabel:"正文",titlePlaceholder:"通知标题...",bodyPlaceholder:"通知正文...",availableVariables:"可用变量",clickToInsert:"点击插入到正文光标位置",livePreview:"实时预览",hide:"隐藏",show:"显示",loadingPreview:"加载预览中...",enterTemplateContent:"输入模板内容以查看预览",titlePreview:"标题：",bodyPreview:"正文：",resetToDefault:"恢复默认",titleRequired:"标题为必填项",bodyRequired:"正文为必填项",notificationLog:"通知日志",showFailedOnly:"仅显示失败",last24Hours:"最近 24 小时",last7Days:"最近 7 天",last30Days:"最近 30 天",last90Days:"最近 90 天",justNow:"刚刚",noFailedNotifications:"没有失败的通知",noNotificationsLogged:"没有通知记录",unknownProvider:"未知提供商",logTitle:"标题",logMessage:"消息",logError:"错误",logProvider:"提供商：{{type}}",logTime:"时间：{{time}}",refresh:"刷新",clearOld:"清除旧记录",statsSummary:"最近 {{days}} 天：",statsNotifications:"条通知",statsSent:"{{count}} 条已发送",statsFailed:"{{count}} 条失败",eventTypes:{print_start:"打印已开始",print_complete:"打印完成",print_failed:"打印失败",print_stopped:"打印已停止",print_progress:"进度",printer_offline:"打印机离线",printer_error:"打印机错误",filament_low:"耗材不足",maintenance_due:"需要维护",test:"测试"},userEmail:{title:"通知",emailNotifications:"邮件通知",emailNotificationsDesc:"接收您自己打印任务的邮件通知。邮件将通过高级身份验证中配置的 SMTP 设置发送。",sendingTo:"通知将发送至",noEmailWarning:"您的账户没有邮件地址。请联系管理员添加。",printJobNotifications:"打印任务通知",printJobNotificationsDesc:"选择哪些事件会触发您提交的打印任务的邮件通知。",printJobStarts:"打印任务开始",printJobStartsDesc:"当您的打印任务开始时收到通知。",printJobFinishes:"打印任务完成",printJobFinishesDesc:"当您的打印任务成功完成时收到通知。",printErrors:"打印错误",printErrorsDesc:"当您的打印任务失败或遇到错误时收到通知。",printJobStops:"打印任务停止",printJobStopsDesc:"当您的打印任务被取消或停止时收到通知。",saveSuccess:"通知偏好设置已保存。",saveError:"保存通知偏好设置失败。"}},richTextEditor:{bold:"粗体",italic:"斜体",underline:"下划线",bulletList:"无序列表",numberedList:"有序列表",alignLeft:"左对齐",alignCenter:"居中对齐",alignRight:"右对齐",addLink:"添加链接",removeLink:"移除链接"},externalLinks:{noLinksConfigured:"未配置外部链接",deleteLink:"删除链接",removeCustomIcon:"移除自定义图标",openInNewTab:"在新标签页中打开",placeholders:{linkName:"我的链接"}},keyboardShortcuts:{title:"键盘快捷键",navigation:"导航",archivesSection:"归档",kProfilesSection:"K 值配置",generalSection:"通用",shortcuts:{goToPrinters:"前往打印机",goToArchives:"前往归档",goToQueue:"前往队列",goToStats:"前往统计",goToProfiles:"前往云端配置",goToSettings:"前往设置",focusSearch:"聚焦搜索",openUploadModal:"打开上传对话框",clearSelection:"清除选择 / 取消焦点",contextMenu:"卡片右键菜单",refreshProfiles:"刷新配置",newProfile:"新建配置",exitSelectionMode:"退出选择模式",showHelp:"显示此帮助"},footer:"按 Esc 或点击外部关闭"},notificationLog:{title:"通知日志",events:{printStarted:"打印开始",printComplete:"打印完成",printFailed:"打印失败",printStopped:"打印停止",progress:"进度",printerOffline:"打印机离线",printerError:"打印机错误",lowFilament:"耗材不足",maintenanceDue:"维护到期",test:"测试"},timeAgo:{justNow:"刚刚",minutesAgo:"{{minutes}} 分钟前",hoursAgo:"{{hours}} 小时前"}},restoreBackup:{title:"恢复备份",restoring:"恢复中...",restoreComplete:"恢复完成",restoreFailed:"恢复失败",importSettings:"从备份文件导入设置",pleaseWait:"请稍候，正在恢复您的数据",clickToSelect:"点击选择备份文件（.json 或 .zip）",howDuplicateHandling:"重复处理方式：",categories:{printers:"打印机",smartPlugs:"智能插座",notificationProviders:"通知提供商",filaments:"耗材",archives:"归档",pendingUploads:"待处理上传",settingsTemplates:"设置和模板"},matchingInfo:{printers:"按序列号匹配",smartPlugs:"按 IP 地址匹配",notificationProviders:"按名称匹配",filaments:"按名称 + 类型 + 品牌匹配",archives:"按内容哈希匹配",pendingUploads:"按文件名匹配",settingsTemplates:"始终覆盖"},replaceExisting:"替换现有数据",keepExisting:"保留现有数据",replaceDescription:"用备份数据覆盖已存在的项目",keepDescription:"仅恢复不存在的项目",caution:"注意：",cautionText:"覆盖将用备份数据替换您当前的配置。出于安全考虑，打印机访问码永远不会被覆盖。",itemsRestored:"已恢复项目",itemsSkipped:"已跳过项目",restored:"已恢复",skipped:"已跳过（已存在）",filesLabel:"文件（3MF、缩略图等）",newApiKeysGenerated:"已生成新 API 密钥",newApiKeysWarning:"这些密钥仅显示一次。请立即复制！",processingBackup:"处理备份文件中...",noDataFound:"备份文件中未找到可恢复的数据。",failedToRestore:"恢复备份失败。请检查文件格式。"},backupExport:{title:"导出备份",selectData:"选择要包含的数据",selectAll:"全选",selectNone:"全不选",categoryDescriptions:{settings:"语言、主题、更新偏好",notifications:"ntfy、Pushover、Discord 等",templates:"自定义消息模板",smartPlugs:"Tasmota 插座配置",externalLinks:"侧边栏外部服务链接",printers:"打印机信息（不含访问码）",plateDetection:"空打印板参考图像",filaments:"耗材类型和成本",maintenance:"自定义维护计划",archives:"所有打印数据 + 文件（3MF、缩略图、照片）",projects:"项目、材料清单和附件",pendingUploads:"虚拟打印机待审核的上传",apiKeys:"Webhook API 密钥（导入时生成新密钥）"},requiresPrinters:"需要选择打印机",zipFileWarning:"将创建 ZIP 文件。",zipFileDescription:"包括所有 3MF 文件、缩略图、延时摄影和照片。这可能需要一些时间并生成较大的文件。",includeAccessCodes:"包含访问码",includeAccessCodesDescription:"用于转移到另一台机器",includeAccessCodesWarning:"访问码将以明文形式包含。请妥善保管此备份文件！",categoriesSelected:"已选择 {{selectedCount}} 个类别"},pendingUploads:{placeholders:{notes:"添加关于此打印的备注..."},discardUpload:"丢弃上传",archiveAllUploads:"归档所有上传",discardAllUploads:"丢弃所有上传",archive:"归档",timeAgo:{justNow:"刚刚",minutesAgo:"{{minutes}} 分钟前",hoursAgo:"{{hours}} 小时前",daysAgo:"{{days}} 天前"}},apiBrowser:{placeholders:{requestBody:"JSON 请求体...",searchEndpoints:"搜索端点..."}},configureAmsSlot:{title:"配置 AMS 槽位",slotConfigured:"槽位已配置！",configuringSlot:"正在配置槽位：",slotLabel:"{{ams}} 槽位 {{slot}}",searchPresets:"搜索预设...",colorPlaceholder:"颜色名称或十六进制（例如：棕色、FF8800）",clearCustomColor:"清除自定义颜色",noCloudPresets:"无云端预设。登录拓竹云以同步。",noPresetsAvailable:"无可用预设。登录拓竹云或导入本地配置。",noMatchingPresets:"未找到匹配的预设。",custom:"自定义",builtin:"内置",settingsSentToPrinter:"设置已发送到打印机",filamentProfile:"耗材配置",kProfileLabel:"K 值配置（压力推进）",filteringFor:"筛选：{{material}}",noKProfile:"无 K 值配置（使用默认值 0.020）",noMatchingKProfiles:"未找到匹配的 K 值配置。将使用默认 K=0.020。",selectFilamentFirst:"请先选择耗材配置",kFromCalibration:"K={{value}}（来自打印机校准）",customColorLabel:"自定义颜色（可选）",presetColors:"{{name}} 颜色：",showLessColors:"显示更少颜色",showMoreColors:"显示更多颜色",clear:"清除",hexLabel:"十六进制：#{{hex}}",resetting:"重置中...",resetSlot:"重置槽位",cancel:"取消",configuring:"配置中...",configureSlot:"配置槽位"},githubBackup:{title:"Git 备份",history:"历史",downloadBackup:"下载备份",restoreBackup:"恢复备份",noBackupsYet:"暂无备份"},emailSettings:{placeholders:{fromName:"Bambuddy"}},tagManagement:{searchTags:"搜索标签...",renameTag:"重命名标签",deleteTag:"删除标签"},notificationTemplates:{placeholders:{title:"通知标题...",body:"通知正文..."}},batchTag:{placeholders:{newTag:"输入新标签..."}},photoGallery:{deletePhoto:"删除照片"},filamentHoverCard:{copySpoolUuid:"复制耗材 UUID"},kProfilesView:{hasNote:"有备注",copyProfile:"复制配置"},layout:{openMenu:"打开菜单",noPermissionSystemInfo:"您没有查看系统信息的权限"},dashboard:{dragToReorder:"拖动以重新排列",hideWidget:"隐藏小部件"},notificationProviderCard:{deleteNotificationProvider:"删除通知提供商"},fileManagerModal:{closeFileManager:"关闭文件管理器",sortFiles:"排序文件",goToParentFolder:"返回上级文件夹",threeView:"3D 视图"},embeddedCameraViewer:{refreshStream:"刷新流",close:"关闭",zoomOut:"缩小",resetZoom:"重置缩放",zoomIn:"放大",dragToResize:"拖动调整大小"},timelapseViewer:{skipBack5s:"后退 5 秒",skipForward5s:"前进 5 秒"},notificationProviders:{descriptions:{email:"SMTP 邮件通知",telegram:"通过 Telegram 机器人通知",discord:"通过 Webhook 发送到 Discord 频道",ntfy:"免费、可自托管的推送通知",pushover:"简单、可靠的推送通知",callmebot:"通过 CallMeBot 的免费 WhatsApp 通知",webhook:"通用 HTTP POST 到任意 URL"}},logViewer:{searchPlaceholder:"搜索消息或日志名称...",noLogEntries:"未找到日志条目"},switchbarPopover:{noSwitchesInSwitchbar:"切换栏中没有开关"},projectPageModal:{placeholders:{title:"标题",designer:"设计师",license:"许可证",description:"输入描述...",profileTitle:"配置标题",profileDescription:"配置描述..."}},spoolmanSettings:{},time:{unknown:"-",waiting:"等待中",justNow:"刚刚",now:"现在",minsAgo:"{{count}} 分钟前",inMins:"{{count}} 分钟后",hoursAgo:"{{count}} 小时前",inHours:"{{count}} 小时后",daysAgo:"{{count}} 天前",inDays:"{{count}} 天后"},spoolbuddy:{nav:{dashboard:"仪表板",ams:"AMS",inventory:"库存",writeTag:"写入",settings:"设置"},status:{nfcReady:"NFC 就绪",nfcOff:"NFC 关闭",offline:"离线",online:"在线",noPrinters:"无打印机",deviceOffline:"设备离线",waitingConnection:"等待设备连接...",systemReady:"系统就绪",status:"状态"},dashboard:{readyToScan:"准备扫描",idleMessage:"将耗材放在秤上以识别",nfcHint:"NFC 标签将自动读取",device:"设备",syncWeight:"同步重量",weightSynced:"已同步！",unknownTag:"未知标签",newTag:"检测到新标签",onScale:"在秤上",linkSpool:"链接到耗材",linkTagTitle:"将标签链接到耗材",linkTag:"链接标签",selectSpool:"选择要链接此标签的耗材：",noUntagged:"未找到没有标签的耗材",tagDetected:"检测到标签",noTag:"无标签",tagId:"标签",grossWeight:"毛重",spoolSize:"耗材盘尺寸",close:"关闭",currentSpool:"当前耗材",plateReady:"热床就绪: {{name}}",plateReadyLabel:"待清理的热床",plateClearAction:"清理",plateClearedToast:"已将热床标记为已清理",plateClearFailed:"无法将热床标记为已清理"},modal:{spoolDetected:"检测到耗材",assignToAms:"分配到 AMS",syncWeight:"同步重量",weightSynced:"已同步！",syncing:"同步中...",newTagDetected:"检测到新标签",addToInventory:"添加到库存",assignToAmsTitle:"分配到 AMS",selectSlot:"选择槽位",assign:"分配",assigning:"分配中...",assignSuccess:"已分配！",assignPendingInsert:"已分配。插入耗材后将配置槽位。",assignError:"分配耗材失败。请重试。",noPrinterSelected:"选择打印机...",noAmsDetected:"此打印机未检测到 AMS",slot:"槽位"},weight:{noReading:"无读数",stable:"稳定",measuring:"测量中...",tare:"去皮",calibrate:"校准"},spool:{remaining:"剩余",material:"材料",brand:"品牌",color:"颜色",coreWeight:"空盘",labelWeight:"标签",scaleWeight:"秤重",netWeight:"净重",lastUsed:"上次使用"},ams:{noData:"未检测到 AMS",connectAms:"连接 AMS 以查看耗材槽位",noPrinter:"未选择打印机",selectPrinter:"从顶部栏选择打印机",printerDisconnected:"打印机已断开",humidity:"湿度",level:"余量",active:"活跃",slot:"槽位",empty:"空"},inventory:{search:"搜索耗材...",empty:"库存中没有耗材",noResults:"没有匹配的耗材",spools:"个耗材",addSpool:"添加耗材"},settings:{tabDevice:"设备",tabDisplay:"显示",tabScale:"秤",tabUpdates:"更新",nfcReader:"NFC 读卡器",type:"类型",connection:"连接",notConnected:"不适用",deviceInfo:"设备信息",hostname:"主机",uptime:"运行时间",systemConfig:"后端与认证",backendUrl:"Bambuddy 后端 URL",apiToken:"API 令牌",apiTokenPlaceholder:"输入 API 令牌",saveConfig:"保存配置",systemQueued:"配置已加入队列。",nfcDiagnostic:"NFC 诊断",scaleDiagnostic:"秤诊断",readTagDiagnostic:"读取标签诊断",testNfc:"测试读卡器",testScale:"测试精度",testReadTag:"读取标签",systemFieldsRequired:"后端 URL 为必填项。",brightness:"亮度",saved:"已保存",noBacklight:"未检测到 DSI 背光。亮度控制需要 DSI 显示屏。",screenBlank:"屏幕熄灭超时",screenBlankDesc:"不活动后屏幕关闭。触摸唤醒。",displayNote:"亮度作为软件滤镜应用。",scaleCalibration:"秤校准",currentWeight:"当前重量",tareOffset:"去皮",calFactor:"系数",knownWeight:"已知重量",calStep1:"移除秤上所有物品并按设置零点。",calStep2:"将已知重量放在秤上。",setZero:"设置零点",calibrateNow:"校准",calibrated:"已校准",tareSet:"去皮命令已发送。等待设备响应...",tareComplete:"去皮完成！",tareTimedOut:"去皮超时 — SpoolBuddy 守护进程是否正在运行？",tareFailed:"发送去皮命令失败",zeroSet:"零点已设置。将已知重量放在秤上。",calibrationDone:"校准完成！",calibrationFailed:"校准失败",lastCalibrated:"上次校准",stable:"稳定",settling:"稳定中...",firmware:"固件",scale:"秤",noDevice:"未找到 SpoolBuddy 设备",daemonVersion:"守护进程版本",currentVersion:"当前",versionPending:"等待守护进程...",checking:"检查中...",checkUpdates:"检查更新",updateAvailable:"有可用更新",updateInstructions:"通过 SSH 更新：运行 SpoolBuddy 安装脚本进行升级。",upToDate:"已是最新",includeBeta:"包含测试版本"},writeTag:{tabExisting:"现有耗材",tabNew:"新耗材",tabReplace:"替换标签",searchPlaceholder:"按材料、颜色、品牌搜索...",noUntaggedSpools:"没有无标签的耗材",noTaggedSpools:"没有有标签的耗材",selectSpool:"选择一个耗材，然后将空白 NTAG 放在读卡器上",placeTag:"将 NTAG 放在读卡器上",tagReady:"检测到标签 — 准备写入",writeTag:"写入标签",replaceTag:"替换标签",writing:"写入标签中...",waiting:"等待 SpoolBuddy...",writeSuccess:"标签写入成功！",writeFailed:"写入失败",queueFailed:"排队写入命令失败",tryAgain:"重试",cancel:"取消",replaceWarning:"旧标签将被取消链接。新标签将替换它。",deviceOffline:"SpoolBuddy 离线",material:"材料",colorName:"颜色名称",color:"颜色",brand:"品牌",weight:"重量 (g)",createSpool:"创建耗材",creating:"创建中...",spoolCreated:"耗材已创建！准备写入。",createFailed:"创建耗材失败",incompleteDataWarning:"已使用不完整的Spoolman数据写入标签"},quickMenu:{printerPower:"打印机电源",systemControls:"系统",restartDaemon:"重启守护进程",restartBrowser:"重启浏览器",reboot:"重启",shutdown:"关机",swipeToClose:"向下滑动关闭",confirmTitle:"确认",confirmShutdown:"确定要关闭SpoolBuddy吗？您需要物理访问才能重新开启。",confirmReboot:"确定要重启SpoolBuddy吗？",confirmRestartDaemon:"重启SpoolBuddy守护进程？NFC和秤将暂时不可用。",confirmRestartBrowser:"重启kiosk浏览器？屏幕将短暂变黑。",confirm:"确认",confirmPlugOn:"开启 {{name}}？",confirmPlugOff:"关闭 {{name}}？",turnOn:"开启",turnOff:"关闭"}},diagnostic:{modalTitle:"连接诊断 — {{name}}",running:"正在运行诊断...",runningElapsed:"正在运行诊断... ({{elapsed}}秒)",waitingForReportHint:"正在等待打印机发布状态报告 — 最长可能需要 {{max}} 秒。",runFailed:"无法运行诊断：{{error}}",retry:"重新运行",runButton:"运行诊断",sectionTitle:"连接诊断",sectionDescription:"检查打印机无法连接或无法打印的原因 — 端口可达性、LAN 开发者模式、Docker 网络模式和凭据。",noPrinters:"未配置打印机。",overall:{ok:"未发现问题 — 打印机连接看起来正常。",warnings:"打印机应该可以工作，但有些事项需要注意。",problems:"发现了可解释打印机无法连接或无法打印的问题。"},check:{port_mqtt:{title:"控制端口（MQTT 8883）",pass:"可达 — 打印机正在接受控制连接。",fail:"端口 8883 不可达。打印机已关机、IP 地址不同，或被防火墙阻止。请核实打印机 IP，并确保没有任何东西阻止端口 8883。"},port_ftps:{title:"文件传输端口（FTPS 990）",pass:"可达 — 发送打印文件将正常工作。",warn:"端口 990 不可达。监控可能仍然有效，但向打印机发送打印任务将失败。请确保端口 990 未被阻止。"},port_rtsps:{title:"摄像头端口（RTSPS 322）",pass:"可达 — 摄像头视频流将正常工作。",warn:"端口 322 不可达。实时摄像头视图将无法工作。这不影响打印。"},network_mode:{title:"Docker 网络模式",pass:"正在以 host 网络模式运行。",warn:'Bambuddy 正在以 Docker bridge 网络运行。打印机发现和虚拟打印机需要 host 网络模式 — 请使用 "network_mode: host" 重新创建容器。',skip:"未在 Docker 中运行 — 不适用。"},subnet:{title:"网络子网",pass:"打印机和 Bambuddy 位于同一子网。",warn:"打印机（{{printer_ip}}）和 Bambuddy（{{host_ip}}）位于不同的子网。除非配置了子网之间的路由，否则它们可能无法相互访问。",skip:"无法确定子网 — 已跳过。"},mqtt_auth:{title:"打印机凭据",pass:"打印机已接受连接。",fail:"打印机可达，但拒绝了连接。访问代码或序列号很可能有误。每次切换开发者模式时访问代码都会更改 — 请从打印机屏幕重新复制。",skip:"未检查 — 无法连接到打印机。"},developer_mode:{title:"LAN 开发者模式",pass:"开发者模式已启用。",fail:"打印机上的开发者模式已关闭。请在打印机的 LAN 设置中启用它 — 并按 OK 确认。否则打印将无法开始。",skip:"无法检查 — 需要与打印机的实时连接。"},printer_publishing:{title:"打印机正在发布状态",pass:"打印机正在发布状态更新 — AMS、耗材和 K 配置将正确镜像到切片软件。",fail:"MQTT 代理已接受连接，但打印机未发布任何状态报告。这几乎总是因为序列号错误或大小写不一致 — device/<serial>/report 主题区分大小写。请将打印机设置中的序列号与打印机屏幕上的显示进行核对。",skip:"无法检查 — 需要与打印机的实时连接。"}}},systemHealth:{sectionTitle:"系统健康",sectionDescription:"扫描最近的日志以发现已知问题，在它们演变成支持工单之前，通常你可以自行解决。",rescan:"重新扫描",clean:"在最近 {{times}} 条日志中未发现已知问题。",logUnavailable:"文件日志记录已禁用，因此无法扫描日志。请启用文件日志以使用此检查。",learnMore:"如何解决",fixLabel:"解决方法：",occurrences:"出现 {{times}} 次 — 最近一次 {{lastSeen}}",category:{layer8:"你可以自行解决",environment:"环境",bug:"请反馈此问题"},signature:{"ftp-auth-rejected":{name:"打印机拒绝了访问码",cause:"打印机拒绝了文件传输登录。访问码错误，或在切换开发者模式后已更改。",fix:"从打印机屏幕（局域网设置）重新复制访问码，并在 Bambuddy 的打印机设置中更新它。"},"ftp-connection-timeout":{name:"文件传输连接超时",cause:"Bambuddy 无法连接打印机的文件传输端口（FTPS 990）。该端口被阻止，或打印机已关机或位于其他子网。",fix:"请确保 Bambuddy 与打印机之间的 990 端口未被阻止，并且两者位于同一网络。"},"ftp-ssl-error":{name:"安全文件传输握手失败",cause:"与打印机文件传输服务器的 TLS 握手失败。通常是防火墙或打印机固件过旧所致。",fix:"请更新打印机固件，并检查没有防火墙或代理拦截 990 端口上的连接。"},"mqtt-connection-flapping":{name:"打印机连接反复断开",cause:"控制连接（MQTT 8883）反复断开并重连——通常是网络信号弱或端口被部分阻止所致。",fix:"请检查打印机附近的 Wi-Fi 信号，尽量使用有线连接，并确保 8883 端口能够稳定连接。"},"camera-connection-refused":{name:"无法访问摄像头视频流",cause:"无法在 RTSPS 322 端口连接实时摄像头。该端口被阻止，或打印机上的摄像头或局域网实时画面已关闭。",fix:"请在打印机上启用摄像头和局域网实时画面，并确保 322 端口未被阻止。这不会影响打印。"},"database-locked":{name:"数据库写入冲突",cause:'在负载下 SQLite 数据库出现 "database is locked" 错误——同时使用多台打印机时较为常见。',fix:"请将 Bambuddy 切换到外部 PostgreSQL 数据库。参见文档中的 PostgreSQL 指南。"}}},vpDiagnostic:{title:"设置检查 — {{name}}",runButton:"运行设置检查",running:"正在运行设置检查...",runFailed:"无法运行设置检查：{{error}}",retry:"重新运行",overall:{ok:"所有检查均已通过 — 此虚拟打印机已正确设置。",warnings:"虚拟打印机应该可以工作，但有些方面需要注意。",problems:"发现的问题可以解释切片软件为何无法看到或使用此虚拟打印机。"},check:{enabled:{title:"虚拟打印机已启用",fail:"此虚拟打印机已关闭。请将其打开以使其可被发现。"},running:{title:"服务正在运行",fail:"虚拟打印机已启用，但其服务未运行。请检查 Bambuddy 日志 — 通常是绑定 IP 冲突或权限错误使其停止。"},bind_interface:{title:"绑定网络接口",fail:'绑定接口未设置，或在此主机上已不存在。请在"绑定接口"下拉菜单中选择一个当前的接口。'},access_code:{title:"已设置访问码",fail:"未设置访问码。必须向切片软件提供与您在此处设置的相同的 8 位访问码。"},target_printer:{title:"目标打印机",fail:"未选择目标打印机。代理模式需要一台实际的打印机进行转发。",warn:"目标打印机当前处于离线状态 — 重新连接后将恢复转发。"},port_ftps:{title:"文件上传服务（端口 {{port}}）",fail:"绑定 IP 的端口 {{port}} 上没有任何监听，因此切片软件无法上传文件。通常是此接口上的端口冲突所致。"},port_mqtt:{title:"控制服务（端口 {{port}}）",fail:"绑定 IP 的端口 {{port}} 上没有任何监听，因此切片软件无法连接或显示状态。"},port_bind:{title:"发现服务（端口 {{port}}）",fail:"绑定 IP 的端口 {{port}} 上没有任何监听，因此切片软件的发现握手会失败。"},certificate:{title:"TLS 证书",pass:"证书已就绪。请确保已将 Bambuddy CA 证书（上方）导入切片软件的信任库。",fail:"此虚拟打印机的 TLS 证书缺失。请检查 Bambuddy 数据目录是否可写。"}}},bugReport:{logHealthSummary:"在你的日志中发现了已知问题",logHealthIntro:"最近的日志与已知问题相符。请查看下方的解决方法——解决它们可能无需提交错误报告即可解决你的问题。你仍然可以在下方提交报告。",title:"报告错误",description:"描述",descriptionPlaceholder:"出了什么问题？请描述问题...",email:"邮箱（可选）",emailPlaceholder:"your@email.com",emailPrivacy:"如果提供，您的邮箱将包含在GitHub Issue的折叠部分中，以便维护者后续跟进。",screenshot:"截图",uploadOrPaste:"上传、粘贴或拖拽图片",dataCollectedSummary:"报告中包含哪些数据？",dataIncluded:"包含：",dataIncludedList:"应用版本、操作系统、架构、Python版本、数据库统计（仅计数）、打印机型号、喷嘴数量、固件版本、连接状态、集成状态（Spoolman、MQTT、HA）、非敏感设置、网络接口数量、Docker详情、依赖版本。",dataNeverIncluded:"绝不包含：",dataNeverIncludedList:"打印机名称、序列号、访问代码、密码、IP地址、邮箱地址、API密钥、令牌、Webhook URL、主机名或用户名。",submit:"提交",startLogging:"开始调试日志",stepEnableLogging:"调试日志已启用",stepReproduce:"请现在重现问题",stepStopLogging:"停止并提交报告",stopAndSubmit:"停止并提交",maxDuration:"{{minutes}}分钟后自动停止",stoppingLogs:"正在收集日志并提交...",submitting:"正在提交错误报告...",submittingStepConnection:"正在执行打印机连接性检查",submittingStepVirtualPrinters:"正在执行虚拟打印机设置检查",submittingStepLogScan:"正在扫描最近的日志以查找已知问题",submittingStepSubmit:"正在将报告提交至 GitHub",submitSuccess:"错误报告提交成功！",submitFailed:"提交错误报告失败",diagnosticChecking:"正在检查打印机连接...",diagnosticHealthy:"连接检查通过 — 未在您的打印机上发现问题。",diagnosticSummary:"{{total}} 台打印机中有 {{problems}} 台存在连接问题",diagnosticIntro:"一台或多台打印机存在连接问题，可能正是您遇到问题的原因。请展开下方的打印机查看解决方法 — 解决它也许无需提交错误报告即可解决问题。您仍然可以在下方提交报告。",thankYou:"谢谢！",submitted:"您的错误报告已提交。",viewIssue:"查看Issue",unexpectedError:"发生了意外错误"},failureDetection:{title:"AI 故障检测",description:"通过自托管的 Obico ML API 监控打印,并对检测到的故障自动采取行动。",mlUrl:"Obico ML API 地址",mlUrlHint:"您自托管的 Obico ml_api 容器的基础 URL(例如 http://192.168.1.10:3333)。",test:"测试",testSuccess:"ML API 可访问且正常。",testFailed:"无法访问 ML API。",sensitivity:"灵敏度",sensitivityLow:"低(减少误报)",sensitivityMedium:"中(平衡)",sensitivityHigh:"高(更早检测,更多误报)",sensitivityHint:"调整触发警告和故障的置信度阈值。",action:"检测到故障时的操作",actionNotify:"仅通知",actionPause:"暂停打印",actionPauseOff:"暂停并切断电源",pollInterval:"检查间隔(秒)",pollIntervalHint:"打印过程中每台打印机的检查频率。最小 5 秒,最大 120 秒。",externalUrlMissing:"未设置外部 URL。",externalUrlHint:"ML API 通过 URL 获取摄像头快照。请在通用设置中设置外部 URL，以便 ML API 容器可以访问 Bambuddy。",perPrinterTitle:"监控的打印机",perPrinterHint:"选择检测服务要监视哪些打印机。",monitorAll:"监控所有已连接的打印机",statusTitle:"状态",serviceRunning:"服务运行中",thresholds:"低 / 高阈值",activePrinters:"活动打印",noActivePrints:"当前没有正在进行的打印。",historyTitle:"最近检测",noHistory:"暂无检测记录。"},makerworld:{title:"MakerWorld",description:"粘贴 MakerWorld 模型链接，即可直接在 Bambuddy 中导入并打印 —— 无需切换到 Bambu Handy 应用。",pasteUrlHeader:"从 MakerWorld 导入",pasteUrlPlaceholder:"https://makerworld.com/en/models/… 或粘贴任意 MakerWorld 链接",resolveButton:"解析",signInRequiredTitle:"下载需要登录 Bambu Cloud",signInRequiredBody:"您可以匿名浏览模型详情，但下载 3MF 文件需要 Bambu Cloud 账户。",openCloudSettings:"打开云设置",untitledModel:"无标题模型",byCreator:"作者: {{name}}",downloadsCount:"{{count}} 次下载",licensePrefix:"许可协议",alreadyImported:"已在资料库中",openOnMakerworld:"在 MakerWorld 中打开",alreadyInLibrary:"此模型已在您的资料库中 —— 可在文件管理器 → MakerWorld 中找到",importSuccess:"已导入 {{filename}} —— 已保存到文件管理器 → MakerWorld",platesHeader:"打印板 ({{count}})",plateDefaultName:"打印板 {{n}}",materialCount:"{{count}} 种耗材",amsRequired:"需要 AMS",slicedFor:"为 {{printer}} 切片",alsoCompatible:"还标记为兼容：{{printers}}",importToLibrary:"保存",sliceIn:"保存并在 {{slicer}} 中切片",disclaimer:"MakerWorld 集成使用由社区记录的 API 接口。Bambuddy 与 MakerWorld 或 Bambu Lab 没有从属或认可关系。",lastImportSuccess:"已导入到您的资料库",lastImportAlreadyInLibrary:"已存在于您的资料库中",viewInLibrary:"在文件管理器中查看",openInBambuStudio:"在 Bambu Studio 中打开",openInOrcaSlicer:"在 OrcaSlicer 中打开",importTo:"导入到文件管理器",recentImportsHeader:"最近导入",phaseResolving:"解析中",phaseDownloading:"下载中",folderAuto:"MakerWorld (默认)",importAll:"全部导入",importAllProgress:"正在导入 {{current}}/{{total}}",openGallery:"打开图片库",galleryPrev:"上一张",galleryNext:"下一张",deleteImport:"从资料库中移除",importDeleting:"正在移除…",importDeleted:"已从资料库中移除",confirmDelete:"从资料库中移除 {{filename}}？本地文件将被删除，但可以从 MakerWorld 重新导入。",errors:{resolveFailed:"无法解析该 MakerWorld 链接。",downloadFailed:"下载失败。请重试。",deleteFailed:"无法从资料库中移除文件。"}},gcodeViewer:{back:"返回",backToArchives:"返回打印归档",backToFiles:"返回文件管理器"},libraryTrash:{title:"回收站",headerButton:"回收站",headerTooltip:"查看已移至回收站的文件",backToFiles:"返回文件管理器",subtitleAdmin:"已删除的文件会在回收站保留 {{days}} 天，之后自动删除。此视图显示所有用户的回收站。",subtitleUser:"已删除的文件会在回收站保留 {{days}} 天，之后自动删除。",loading:"正在加载回收站…",loadError:"无法加载回收站。",empty:"回收站为空。",summary:"{{count}} 个文件 · {{size}}",emptyTrash:"清空回收站",restore:"还原",purgeNow:"立即删除",autoPurgeIn:"将于 {{when}} 自动删除",days:"天",retentionLabel:"自动删除时间",selectAll:"全选",selectOne:"选择 {{filename}}",selectionCount:"已选择 {{count}} 项",bulkRestore:"还原所选",bulkPurge:"删除所选",col:{filename:"文件",folder:"文件夹",size:"大小",deleted:"移入回收站",autoPurge:"自动删除",owner:"所有者",actions:"操作"},confirm:{purgeTitle:"永久删除？",purgeBody:"{{filename}} 将从磁盘中删除，无法恢复。",emptyTitle:"清空回收站？",emptyBody:"全部 {{count}} 个文件将从磁盘中删除。此操作无法撤消。",bulkPurgeTitle:"永久删除所选文件？",bulkPurgeBody:"所选的 {{count}} 个文件将从磁盘中删除，无法恢复。",cta:"永久删除"},toast:{restored:"文件已还原。",restoreFailed:"无法还原文件。",purged:"文件已永久删除。",purgeFailed:"无法删除文件。",emptied:"已从回收站删除 {{count}} 个文件。",emptyFailed:"无法清空回收站。",retentionSaved:"自动删除已设置为 {{days}} 天。",retentionFailed:"无法保存保留设置。",bulkRestored:"已还原 {{count}} 个文件。",bulkPurged:"已删除 {{count}} 个文件。"}},libraryPurge:{title:"清理旧文件",headerButton:"清理旧文件",headerTooltip:"批量将旧文件移至回收站",description:"早于所选阈值的文件将被移至回收站。外部文件夹会被跳过。在自动删除之前，您可以从回收站还原文件。",ageLabel:"移动早于以下天数的文件",days:"天",includeNeverPrinted:"包括从未打印过的文件",effectsTitle:"点击清除时会发生什么",effect1:"匹配的文件移至回收站 — 尚未从磁盘删除。",effect2:"在保留期到期之前，您可以随时从回收站恢复。",effect3:"保留期满后，回收站清理器将它们从磁盘永久删除。",effect4:"外部（链接）文件夹中的文件将被跳过 — Bambuddy 从不删除不属于自己的字节。",previewLoading:"正在检查匹配的文件数量…",previewFailed:"无法预览清理结果。",previewSummary:"{{count}} 个文件 · {{size}} 将被移至回收站",andMore:"…还有 {{count}} 个",warning:"文件将被软删除——在保留期结束前，您可以从回收站还原它们。",confirmCta:"将 {{count}} 个移至回收站",purging:"正在移至回收站…",toast:{success:"已将 {{count}} 个文件移至回收站。",failed:"无法清理文件。"}},libraryAutoPurge:{enableLabel:"自动清理旧文件",enableDescription:"每天执行一次管理员清理。文件会先进入回收站——不会立即删除。",ageLabel:"自动清理早于以下天数的文件",ageDescription:"最少 7 天，最多 10 年。使用与手动「清理旧文件」按钮相同的时间规则。",days:"天",includeNeverPrinted:"包括从未打印过的文件",saveFailed:"无法保存自动清理设置。"},archivePurge:{headerButton:"清除旧条目",headerTooltip:"批量删除旧归档",title:"清除旧归档",description:"清除旧的打印历史。每个归档按其最近一次打印完成时间老化 — 重新打印归档会刷新其年龄，因此活跃工作永远不会被清除。",ageLabel:"删除最近未打印的归档：",days:"天",effectsTitle:"点击清除时会发生什么",effect1:"每个匹配的归档将从列表中隐藏，其磁盘文件（3MF、缩略图、延时摄影、源 3MF、F3D、照片）也将被删除。",effect2:"数据库中的归档记录将被保留，因此 Quick Stats 仍可计入耗材、时间、成本和能耗的贡献 — 与单条删除的默认行为一致。",effect3:'勾选下方"同时从统计中移除"可一并清除 Quick Stats 中的贡献（与单条删除选项等同）。该操作不可撤销。',effect4:"重新打印归档会刷新其使用计时器，因此仍在使用的归档不会被清除。",purgeStatsLabel:"同时从统计中移除",purgeStatsHint:"从 Quick Stats（耗材、时间、成本、能耗）中移除匹配的归档。不勾选时，Quick Stats 保留所有贡献，仅文件从磁盘删除。",previewLoading:"检查匹配的归档数量…",previewFailed:"无法预览清除。",previewSummary:"将移除 {{count}} 个归档 · {{size}}",andMore:"…还有 {{count}} 个",warning:"文件将从磁盘删除且无法恢复。继续前请下载或收藏您想保留的内容。",confirmCta:"移除 {{count}} 个归档",purging:"移除中…",toast:{success:"已移除 {{count}} 个归档。",failed:"无法清除归档。"}},archiveAutoPurge:{enableLabel:"自动清除旧归档",enableDescription:"每天一次，将阈值内未打印的归档从列表中隐藏，并从磁盘中删除其文件。重新打印会重置计时器。",ageLabel:"自动删除最近未打印的归档：",ageDescription:"最少 7 天，最多 10 年。基于最近一次打印完成 — 重新打印会刷新年龄。删除 3MF、缩略图、延时摄影、源 3MF、F3D 和照片。",days:"天",purgeStatsLabel:"同时从统计中移除",purgeStatsDescription:"启用后，每日清理任务还会将每个被清除的归档从 Quick Stats（耗材、时间、成本、能耗）中移除。默认关闭 — Quick Stats 保留贡献，仅文件从磁盘删除。",runNow:"立即清除归档",saveFailed:"无法保存自动清除设置。"},cameraTokens:{title:"摄像头 API 令牌",navTitle:"摄像头 API 令牌",description:"长期令牌，用于将摄像头流嵌入 Home Assistant、Frigate、信息亭或其他需要稳定 URL 的工具。每个令牌仅限摄像头流，可随时撤销。",loading:"加载中…",confirmRevoke:{title:"撤销此令牌？",body:"使用「{{name}}」的任何设备将立即失去访问权限。此操作无法撤销。",cancel:"取消",confirm:"撤销"},create:{title:"创建新令牌",nameLabel:"令牌名称",namePlaceholder:"例如 Home Assistant",daysLabel:"过期天数",submit:"创建",hint:"最大有效期 365 天。令牌值仅在创建时显示一次 — 请立即复制。"},created:{title:"令牌已创建 — 立即复制",warning:"这是此令牌唯一一次可见。关闭此对话框后您将无法再次查看。",copy:"复制",dismiss:"我已保存"},list:{myTitle:"我的令牌",allTitle:"所有用户（管理员视图）",empty:"暂无令牌。",name:"名称",owner:"所有者",prefix:"前缀",created:"创建时间",expires:"过期时间",lastUsed:"最近使用",revoke:"撤销",expired:"已过期"},toast:{created:"令牌已创建",createFailed:"创建令牌失败",revoked:"令牌已撤销",revokeFailed:"撤销令牌失败",loadFailed:"加载令牌失败",copied:"已复制到剪贴板",copyFailed:"复制失败 — 手动选择并复制"}},forecast:{title:"库存预测",noSpools:"未找到活跃的料卷。请将料卷添加到库存中以查看预测数据。",noUsageData:"无可用使用数据 — 无法预测库存时间线。",sku:"SKU",material:"材料",stock:"库存",dailyRate:"消耗率",daysLeft:"剩余天数",emptyBy:"耗尽日期",reorderBy:"补货截止日",actions:"操作",trend:"趋势",estimated:"估算",noData:"无数据",timeframe:"时间范围",chartTitle:"库存预测 — 前5种材料",dashedLinesROP:"虚线 = 再订货点",stockLevel:"库存量",reorderPoint:"再订购点",safetyMargin:"安全余量",trendLegend:"趋势（基于历史，95%服务水平）",estimatedLegend:"估算（重量差值）",noDataLegend:"无数据",ropLabel:"再订货点",ssLabel:"安全库存",safetyStockLegend:"安全库存",stockArrivalLegend:"到货",stockoutLegend:"断货",alertCount_one:"{{count}}条警告",alertCount_other:"{{count}}条警告",order:"订购",globalLeadTime:"全局交货期",globalLeadTimeHint:"全局交货期下限 — 用于所有 SKU 的再订购点计算",save:"保存",cancel:"取消",settingsSaved:"设置已保存",failedSaveSettings:"保存设置失败",globalLeadTimeSaved:"全局提前期已保存",skuLeadTimeOverride:"SKU 交货期覆盖",skuLeadTimeHint:"0 = 使用全局交货期。设置 >0 以覆盖此 SKU。",safetyMarginLabel:"安全余量",effectiveLeadTime:"有效交货期",effectiveLeadTimeHint:"max(全局 {{global}}天, SKU {{sku}}天)",reorderPointHint:"d̄ × LT + safety margin — 当库存降至此水平时下单",safetyMarginHint:"统计安全库存 (z=1.65 × σ × √LT) + 用户自定义缓冲",safetyMarginHintDays:"在统计安全库存基础上额外增加的缓冲。{{approx}}",safetyMarginHintDaysApprox:" ≈ 按当前速率 {{g}}g。",safetyMarginHintG:"在统计安全库存基础上增加的固定重量缓冲。{{approx}}",safetyMarginHintGApprox:" ≈ 按当前速率 {{days}}天。",individualSpools:"单个料卷",labelWeight:"标注重量",spoolCount_one:"{{count}}个线轴",spoolCount_other:"{{count}}个线轴",stockBreakRisk:"断货风险",stockBreakBefore:"补货前库存断档",stockBreakDetail:"剩余 {{days}} 天，交货期 {{lt}} 天。",reorderNow:"立即补货",reorderTriggerPassed:"触发日期 {{date}} 已过。",shoppingList:"购物清单",shoppingListItems_one:"（{{count}}项）",shoppingListItems_other:"（{{count}}项）",shoppingListEmpty:"购物清单为空。点击任意行的购物车图标以添加商品。",addToCart:"添加到购物清单",alertsSnoozed:"静音此SKU的提醒",alertsEnabled:"启用此SKU的提醒",addedToCart:"已添加到购物清单",failedAddItem:"添加项目失败",listView:"列表",logisticsView:"物流",qty:"数量",weight:"重量",leadTime:"交货期",expectedRestock:"预计补货日期",status:"状态",note:"备注",pending:"待处理",purchased:"已购买",received:"已收货",markPurchased:"标记为已购买",markReceived:"标记为已收货 — 将料卷添加到库存",resetToPending:"重置为待处理",remove:"移除",clearAll:"清空",downloadCsv:"CSV",addToCartTitle:"添加到购物清单",byQuantity:"按数量",byDuration:"按时长",numberOfSpools:"线轴数量",lastHowManyDays:"需要持续多少天？",noUsageQty:"无使用数据 — 数量已设为1。",noteOptional:"备注（可选）",notePlaceholder:"例如：用于项目X，紧急…",addNSpools_one:"添加{{count}}个线轴",addNSpools_other:"添加{{count}}个线轴",onArrival:"到货时",stockBreakIn:"{{days}} 天后断货。",stockRunsOutBefore:"库存在 {{lt}} 天交货期结束前耗尽。",atRate:"按 {{rate}}g/天的速度，您需要",moreSpools_one:"再{{count}}个线轴",moreSpools_other:"再{{count}}个线轴",bridgeGap:"来弥补缺口。",noReadAccess:"您没有查看库存预测的权限。",noWriteAccess:"您没有修改预测设置的权限。"}},Npe={nav:{printers:"印表機",archives:"歸檔",queue:"列印佇列",stats:"統計",profiles:"設定檔案",maintenance:"維護",projects:"專案",inventory:"耗材",files:"檔案管理器",makerworld:"MakerWorld",notifications:"通知",settings:"設定",system:"系統",collapseSidebar:"收起側邊欄",expandSidebar:"展開側邊欄",update:"更新",updateAvailable:"有可用更新：v{{version}}",updateAvailableBanner:"版本 {{version}} 已發布！",viewUpdate:"檢視更新",viewOnGithub:"在 GitHub 上檢視",keyboardShortcuts:"鍵盤快捷鍵 (?)",switchToLight:"切換到淺色模式",switchToDark:"切換到深色模式",switchToSystem:"切換到系統模式",smartSwitches:"智慧開關",logout:"登出",installApp:"安裝應用程式",installAppSuccess:"Bambuddy 已安裝"},common:{save:"儲存",saving:"儲存中...",cancel:"取消",delete:"刪除",edit:"編輯",add:"新增",close:"關閉",confirm:"確認",loading:"載入中...",error:"錯誤",errorLoading:"載入錯誤",retry:"重試",success:"成功",warning:"警告",enabled:"已啟用",disabled:"已停用",yes:"是",no:"否",on:"開",off:"關",all:"全部",none:"無",search:"搜尋",filter:"篩選",sort:"排序",refresh:"重新整理",download:"下載",upload:"上傳",uploading:"上傳中...",uploadFailed:"上傳失敗",actions:"操作",status:"狀態",name:"名稱",description:"描述",date:"日期",time:"時間",hours:"小時",minutes:"分鐘",seconds:"秒",days:"天",enable:"啟用",disable:"停用",permissions:"權限",noPrinters:"未設定印表機",noData:"尚無資料",linkNotFound:"未找到連結",required:"必填",optional:"可選",dismiss:"關閉",apply:"套用",reset:"重設",export:"匯出",import:"匯入",clear:"清除",selectAll:"全選",deselectAll:"取消全選",noChange:"— 不更改 —",unchanged:"未更改",unassigned:"未分配",unknown:"未知",unknownError:"未知錯誤",today:"今天",tomorrow:"明天",asap:"儘快",overdue:"已逾期",now:"現在",collapse:"收起",expand:"展開",viewArchive:"檢視歸檔",viewInFileManager:"在檔案管理器中檢視",addedBy:"由 {{username}} 新增",prints:"次列印",more:"還有 {{count}} 個",ascending:"升序",descending:"降序",back:"返回",copy:"複製",copied:"已複製!",printer:"印表機",remove:"移除",type:"類型",print:"列印",rename:"重新命名",move:"移動",create:"建立",duplicate:"複製",left:"左",right:"右"},printers:{addPreflight:{checking:"正在檢查連線...",warning:"部分連線檢查未通過。此印表機可能顯示為離線。請查看下方的檢查項目，盡量修復，或仍然儲存。",back:"返回",saveAnyway:"仍然儲存"},title:"印表機",addPrinter:"新增印表機",editPrinter:"編輯印表機",deletePrinter:"刪除印表機",printerName:"印表機名稱",serialNumber:"序列號",ipAddress:"IP 位址 / 主機名稱",accessCode:"存取碼",model:"型號",nozzleCount:"噴嘴數量",autoArchive:"自動歸檔",status:{available:"可用",idle:"空閒",printing:"列印中",paused:"已暫停",offline:"離線",problem:"故障",error:"錯誤",finished:"已完成",unknown:"未知"},temperatures:{nozzle:"噴嘴",bed:"熱床",chamber:"腔室"},progress:"{{percent}}% 完成",timeRemaining:"剩餘 {{time}}",deleteConfirm:'確定要刪除"{{name}}"嗎？',maintenanceOk:"維護正常",maintenanceWarning:"{{count}} 個警告",maintenanceWarning_plural:"{{count}} 個警告",maintenanceDue:"{{count}} 個到期",maintenanceDue_plural:"{{count}} 個到期",sort:{name:"名稱",status:"狀態",model:"型號",location:"位置",ascending:"升序排列",descending:"降序排列"},cardSize:{small:"小卡片",medium:"中卡片",large:"大卡片",extraLarge:"超大卡片"},hideOffline:"隱藏離線",nextAvailable:"下一個可用",powerOn:"開機",offlinePrintersWithPlugs:"帶智慧插座的離線印表機",noPrintersConfigured:"尚未設定印表機",search:"搜尋印表機...",noSearchResults:"沒有印表機符合您的搜尋或篩選條件",filter:{allStatuses:"所有狀態",allLocations:"所有位置"},toolbar:{filters:"篩選",view:"檢視",actions:"操作"},readyToPrint:"準備列印",external:"外部",extL:"外接左",extR:"外接右",deleteArchives:"刪除列印歸檔",noLabel:"無標籤",printPreview:"列印預覽",width:"寬度",height:"高度",noObjectsFound:"未找到物件",objectsLoadedOnPrintStart:"物件在列印開始時載入",willBeSkipped:"將被跳過",name:"名稱",serialCannotBeChanged:"序列號無法更改",locationHelp:"用於分組印表機和篩選佇列任務",wifiSignal:{veryWeak:"非常弱",weak:"弱",fair:"一般",good:"良好",excellent:"優秀"},maintenanceUpToDate:"所有維護均已完成 - 點選檢視",chamberLightOn:"開啟腔室燈",chamberLightOff:"關閉腔室燈",files:"檔案",browseFiles:"瀏覽印表機檔案",autoOffAfterPrint:"列印後自動關機",autoOffExecuted:"已執行自動關機 - 開啟印表機以重設",hmsErrors:"HMS 錯誤",viewHmsErrors:"檢視 {{count}} 個 HMS 錯誤",resume:"繼續",pause:"暫停",stop:"停止",camera:"攝影機",skipObject:"跳過物件",reconnect:"重新連線",forceRefresh:"強制重新整理",forceRefreshSuccess:"已請求重新整理",mqttDebug:"MQTT 偵錯",printerInformation:"印表機資訊",copyToClipboard:"複製",copied:"已複製！",state:"狀態",wifiSignalLabel:"Wi-Fi 訊號",developerMode:"開發者模式",enabled:"已啟用",disabled:"已停用",addedOn:"新增日期",sdCard:"SD 卡",inserted:"已插入",notInserted:"未插入",totalPrintHours:"列印時長",activeNozzle:"目前：{{nozzle}} 噴嘴",nozzleRack:"噴嘴架",nozzleDocked:"已停靠",nozzleMounted:"已安裝",nozzleActive:"使用中",nozzleIdle:"空閒",nozzleDiameter:"直徑",nozzleType:"類型",nozzleStatus:"狀態",nozzleFilament:"耗材",nozzleWear:"磨損",nozzleMaxTemp:"最高溫度",nozzleSerial:"序列號",nozzleHardenedSteel:"硬化鋼",nozzleStainlessSteel:"不鏽鋼",nozzleTungstenCarbide:"碳化鎢",nozzleFlow:"流量",nozzleHighFlow:"高流量",nozzleStandardFlow:"標準",firmwareUpdate:"韌體更新",firmwareInstructions:"在印表機觸控式螢幕上，前往",firmwareNav:"導航到",settings:"設定",firmware:"韌體",discoverPrinters:"發現印表機",searching:"搜尋中...",manualEntry:"手動輸入",addFromCloud:"從雲端新增",toast:{printerDeleted:"印表機已刪除",missingSpoolAssignment:"已在{{printer}}上開始列印。以下料槽未分配耗材: {{slots}}",printerAdded:"印表機已新增",printerUpdated:"印表機已更新",failedToDelete:"刪除印表機失敗",failedToAdd:"新增印表機失敗",connectionFailedNotAdded:"無法連線到印表機。請檢查 IP 位址、序號和存取碼，並確認已啟用僅區域網路（LAN-only）模式。該印表機未被新增。",failedToUpdate:"更新印表機失敗",commandSent:"命令已傳送",failedToSendCommand:"傳送命令失敗",turnedOn:"{{name}} 已開啟",failedToPowerOn:"開啟 {{name}} 失敗",scriptTriggered:"腳本已觸發",printStopped:"列印已停止",printPaused:"列印已暫停",printResumed:"列印已繼續",referenceDeleted:"參考已刪除",detectionAreaSaved:"檢測區域已儲存",failedToRunScript:"執行腳本失敗",failedToStopPrint:"停止列印失敗",failedToPausePrint:"暫停列印失敗",failedToResumePrint:"繼續列印失敗",failedToControlChamberLight:"控制腔室燈失敗",failedToSetSpeed:"設定列印速度失敗",failedToUpdateSetting:"更新設定失敗",failedToSkipObjects:"跳過物件失敗",failedToRereadRfid:"重新讀取 RFID 失敗",failedToCheckPlate:"檢查列印板失敗",failedToUpdateLabel:"更新標籤失敗",failedToDeleteReference:"刪除參考失敗",failedToSaveDetectionArea:"儲存檢測區域失敗",plateCheckEnabled:"列印板檢查已啟用",plateCheckDisabled:"列印板檢查已停用",calibrationSaved:"校準已儲存！",calibrationFailed:"校準失敗",rfidRereadInitiated:"已發起 RFID 重新讀取",loadInitiated:"載入耗材中…",unloadInitiated:"卸載耗材中…",failedToLoad:"載入耗材失敗",failedToUnload:"卸載耗材失敗"},connection:{connected:"已連線",offline:"離線"},plateStatus:{markCleared:"將列印板標記為已清理",cleared:"列印板已清理",notCleared:"列印板未清理",inUse:"列印板使用中"},queue:{inQueue:"佇列中有 {{count}} 個列印任務",inQueue_plural:"佇列中有 {{count}} 個列印任務"},controls:"控制",rfid:{reread:"重新讀取 RFID"},ams:{load:"載入",unload:"卸載"},bedJog:{title:"移動熱床",bed:"熱床",step:"步長 (mm)",up:"熱床上移",down:"熱床下移",disabledWhilePrinting:"列印中已停用",notHomedTitle:"印表機未歸零",notHomedMessage:"印表機自上次列印以來尚未歸零。請先執行自動歸零以確保安全定位（先停放噴頭，然後歸零 X、Y 和 Z），或者直接移動 — 軟限位將被繞過。",homeZ:"自動歸零",moveAnyway:"強制移動",homingStarted:"印表機自動歸零中…"},permission:{noAdd:"您沒有新增印表機的權限",noEdit:"您沒有編輯印表機的權限",noDelete:"您沒有刪除印表機的權限",noControl:"您沒有控制印表機的權限",noFiles:"您沒有存取印表機檔案的權限",noAmsRfid:"您沒有重新讀取 AMS RFID 的權限",noSmartPlugControl:"您沒有控制智慧插座的權限",noCamera:"您沒有檢視攝影機的權限"},modal:{addTitle:"新增印表機",editTitle:"編輯印表機",myPrinter:"我的印表機",selectModel:"選擇型號...",locationGroup:"位置 / 分組（可選）",locationPlaceholder:"例如：工作室、辦公室、地下室",autoArchiveLabel:"自動歸檔已完成的列印",fromPrinterSettings:"來自印表機設定",modelOptional:"型號（可選）",saveChanges:"儲存更改"},skipObjects:{tooltip:"跳過物件",onlyWhilePrinting:"跳過物件（僅在列印時）",requiresMultiple:"跳過物件（需要2個以上物件）",title:"跳過物件",matchIdsInfo:"將 ID 與印表機螢幕上的 ID 進行對照",printerShowsIds:"印表機螢幕上顯示列印板上物件的 ID",skipSelected:"跳過所選",skipping:"跳過中...",noObjectsSelected:"未選擇物件",selectObjectsToSkip:"選擇要從目前列印中跳過的物件",skipped:"已跳過",objectsSkipped:"物件已跳過",activeCount:"{{count}} 個活躍",waitForLayer:"等待第2層以上才能跳過物件（目前第 {{layer}} 層）",skip:"跳過",confirmTitle:"跳過物件？",confirmMessage:'確定要跳過"{{name}}"嗎？此操作無法復原。'},confirm:{deleteTitle:"刪除印表機",deleteMessage:'確定要刪除"{{name}}"嗎？這將移除所有連線設定。',deleteArchivesNote:"此印表機的所有列印歷史將被永久刪除。",keepArchivesNote:"列印歷史將保留，但不再與此印表機連結。",stopTitle:"停止列印",stopMessage:'確定要停止"{{name}}"上的目前列印嗎？這將取消列印任務。',stopButton:"停止列印",pauseTitle:"暫停列印",pauseMessage:'確定要暫停"{{name}}"上的目前列印嗎？',pauseButton:"暫停列印",resumeTitle:"繼續列印",resumeMessage:'確定要繼續"{{name}}"上的列印嗎？',resumeButton:"繼續列印",powerOnTitle:"開啟印表機",powerOnMessage:'確定要開啟"{{name}}"的電源嗎？',powerOnButton:"開機",powerOffTitle:"關閉印表機",powerOffMessage:'確定要關閉"{{name}}"的電源嗎？',powerOffWarning:'警告："{{name}}"正在列印中！確定要關閉電源嗎？這將中斷列印並可能損壞印表機。',powerOffButton:"關機",haToggleTitle:'切換"{{name}}"',haToggleMessage:"切換 Home Assistant 實體 {{entity}}？如果目前為開啟狀態，可能會關閉電源。",haToggleWarning:'警告："{{name}}"正在列印中！切換 {{entity}} 可能會切斷電源並中斷列印。是否繼續？',haToggleButton:"切換"},bulk:{select:"選擇",selectAll:"全選",selectByLocation:"按位置選擇",selected:"已選擇{{count}}臺",actions:{stop:"停止",pause:"暫停",resume:"繼續",clearPlate:"清除列印床",clearHMS:"清除通知"},confirm:{stopTitle:"停止{{count}}個列印任務",stopMessage:"這將取消{{count}}臺印表機上的活動列印任務。此操作無法復原。",stopButton:"全部停止",pauseTitle:"暫停{{count}}個列印任務",pauseMessage:"這將暫停{{count}}臺印表機上的活動列印任務。",pauseButton:"全部暫停",clearPlateTitle:"清除{{count}}個列印床",clearPlateMessage:"這將清除{{count}}臺印表機的列印床，可能會觸發佇列中的任務。",clearPlateButton:"全部清除"},success:"{{action}}已在{{count}}臺印表機上完成",partial:"{{succeeded}}成功，{{failed}}失敗",noneApplicable:"沒有選中的印表機處於適合此操作的狀態",selectByState:"按狀態選擇"},discovery:{title:"發現印表機",searching:"搜尋中...",scanning:"掃描中...",scanProgress:"掃描中... {{scanned}}/{{total}}",foundPrinters:"發現 {{count}} 臺印表機",noPrintersFound:"未找到印表機",noPrintersFoundSubnet:"在指定子網中未找到印表機。",noPrintersFoundNetwork:"在網路上未找到印表機。",allConfigured:"所有發現的印表機已設定完畢。",alreadyAdded:"已新增",select:"選擇",manualEntry:"手動輸入",addFromCloud:"從雲端新增",subnetToScan:"要掃描的子網",dockerNote:"偵測到 Docker 環境。請以 CIDR 格式輸入印表機所在子網。需要在 docker-compose.yml 中設定 network_mode: host。",scanSubnet:"掃描子網查詢印表機",discoverNetwork:"在網路上發現印表機",scanningSubnet:"正在掃描子網查詢拓竹印表機...",scanningNetwork:"正在掃描網路...",serialRequired:"需要序列號",unknown:"未知",failedToStart:"啟動發現失敗",customSubnetOption:"自訂子網路...",customSubnetLabel:"自訂子網路 (CIDR)",customSubnetNote:"如果您的印表機與此伺服器位於不同的網路中，請使用自訂子網路。FTP (990) 和 MQTT (8883) 連接埠必須能夠跨越路由邊界存取。"},drying:{start:"開始乾燥",stop:"停止乾燥",temperature:"溫度",duration:"時長",hours:"小時",timeRemaining:"剩餘 {{time}}",active:"乾燥中",notSupported:"不支援乾燥",powerRequired:"連線AMS電源介面卡以啟用乾燥",startingDrying:"正在啟動乾燥...",stoppingDrying:"正在停止乾燥...",rotateTray:"乾燥時旋轉料盤"},filaments:"耗材",openCameraOverlay:"開啟攝影機疊加層",openCameraWindow:"在新視窗中開啟攝影機",firmwareUpdateAvailable:"韌體更新可用：{{current}} → {{latest}}",firmwareUpToDate:"韌體 {{version}} — 已是最新",firmwareUpdateButton:"更新",plateDetection:{noPermission:"您沒有更新印表機的權限",enabledClick:"列印板檢查已啟用 - 點選停用",disabledClick:"列印板檢查已停用 - 點選啟用",manageCalibration:"管理列印板檢測校準",calibrationRequired:"需要校準",calibrationInstructions:"請確保列印板<strong>完全空置</strong>，然後點選校準。",calibrationDescription:"校準會拍攝空置列印板的參考影像。後續檢查將與此參考進行比較以檢測物體。",calibrationTip:"<strong>提示：</strong>您最多可以為不同的列印板儲存5個校準。系統會在檢查時自動使用最佳匹配。",plateEmpty:"列印板似乎是空的",objectsDetected:"在列印板上偵測到物體",confidence:"置信度",difference:"差異",analysisPreview:"分析預覽：",analysisLegend:"綠色框 = 檢測區域，紅色覆蓋 = 與校準的差異",savedReferences:"已儲存的參考 ({{count}}/{{max}})",deleteReference:"刪除參考",labelPlaceholder:"標籤...",clickToEdit:"{{label}} - 點選編輯",clickToAddLabel:"點選新增標籤"},speed:{title:"列印速度",silent:"靜音 (50%)",standard:"標準 (100%)",sport:"運動 (124%)",ludicrous:"瘋狂 (166%)"},airduct:{title:"風道模式",cooling:"製冷",heating:"加熱"},noSdCard:"無SD",door:{open:"開",closed:"關"},fans:{partCooling:"零件冷卻風扇",auxiliary:"輔助風扇",chamber:"腔室風扇"},clickToViewHmsErrors:"點選檢視 HMS 錯誤",estimatedCompletion:"預計完成時間",plateNumber:"板 {{number}}",slotOptions:"槽位選項",amsPopup:{friendlyName:"AMS 名稱",friendlyNamePlaceholder:"例如 AMS 友好名稱",serialNumber:"序列號",firmwareVersion:"韌體",save:"儲存",clear:"清除",noEditPermission:"您沒有重新命名 AMS 單元的權限"},firmwareModal:{title:"韌體更新",titleUpToDate:"韌體資訊",currentVersion:"目前版本：",latestVersion:"最新版本：",releaseNotes:"發布說明",checkingPrereqs:"正在檢查前提條件...",sdCardReady:"SD 卡已就緒。點選下方上傳韌體。",uploadedSuccess:"韌體已上傳到 SD 卡！",applyInstructions:"在印表機上套用更新：",step1:"在印表機觸控式螢幕上，前往<strong>設定</strong>",step2:"導航到<strong>韌體</strong>",step3:"選擇<strong>從 SD 卡更新</strong>",step4:"更新將需要 10-20 分鐘",done:"完成",starting:"啟動中...",uploadFirmware:"上傳韌體",uploadFailed:"上傳啟動失敗：{{error}}",uploadedToast:"韌體已上傳！請在印表機螢幕上觸發更新。",availableVersions:"可用版本",usable:"可用",unavailable:"不可用",installed:"已安裝",newerBadge:"較新",olderBadge:"較舊",currentBadge:"目前"},accessCodePlaceholder:"留空以保持目前值",roi:{title:"檢測區域 (ROI)",xStart:"X 起點",yStart:"Y 起點",width:"寬度",height:"高度",instruction:"調整檢測區域以聚焦到列印板。預覽中的綠色框顯示目前區域。"},developerModeWarning:"以下印表機未啟用開發者區域網路模式：{{names}}。某些功能可能無法使用。",howToEnable:"如何啟用",incompatibleFile:"此檔案是為 {{slicedFor}} 切片的，但該印表機是 {{printerModel}}",dropNotPrintable:"只能列印 .gcode 和 .gcode.3mf 檔案",dropToPrint:"拖放以列印",cannotPrint:"印表機忙碌"},archives:{title:"列印歸檔",searchPlaceholder:"搜尋歸檔...",filterByPrinter:"按印表機篩選",filterByStatus:"按狀態篩選",sortBy:"排序方式",sortNewest:"最新優先",sortOldest:"最舊優先",sortName:"名稱",sortDuration:"時長",sortLargest:"最大優先",sortSmallest:"最小優先",sortSize:"大小",noArchives:"未找到歸檔",noArchivesSearch:"沒有匹配搜尋的歸檔",originalPrintNotVisible:"原始列印不可見 - 請嘗試清除篩選條件",noArchivesYet:"尚無歸檔",prints:"條列印",pagination:{showing:"顯示",to:"至",of:"共",show:"每頁",page:"頁",all:"全部"},loadingArchives:"載入歸檔中...",releaseToUpload:"放開以上傳",showAll:"顯示全部",showFavoritesOnly:"僅顯示收藏",gridView:"網格檢視",listView:"列表檢視",calendarView:"日曆檢視",logView:"列印日誌",manageTags:"管理標籤",showFailedPrints:"顯示失敗的列印",hideFailedPrints:"隱藏失敗的列印",hideDuplicates:"隱藏重複項",viewOriginalPrint:"點選檢視原始列印 (#{{id}})",printTime:"列印時間",filamentUsed:"耗材用量",cost:"成本",reprint:"重新列印",preview:"預覽",deleteArchive:"刪除歸檔",deleteConfirm:"確定要刪除此歸檔嗎？",favorite:"收藏",unfavorite:"取消收藏",viewDetails:"檢視詳情",status:{completed:"已完成",failed:"失敗",stopped:"已停止"},toast:{source3mfAttached:"源 3MF 已附加：{{filename}}",failedUploadSource3mf:"上傳源 3MF 失敗",source3mfRemoved:"源 3MF 已移除",failedRemoveSource3mf:"移除源 3MF 失敗",f3dAttached:"F3D 已附加：{{filename}}",failedUploadF3d:"上傳 F3D 失敗",f3dRemoved:"F3D 已移除",failedRemoveF3d:"移除 F3D 失敗",timelapseAttached:"縮時攝影已附加：{{filename}}",timelapseAlreadyAttached:"縮時攝影已附加",noMatchingTimelapse:"未找到匹配的縮時攝影",failedScanTimelapse:"掃描縮時攝影失敗",failedAttachTimelapse:"附加縮時攝影失敗",timelapseRemoved:"縮時攝影已移除",failedRemoveTimelapse:"移除縮時攝影失敗",timelapseUploaded:"縮時攝影已上傳：{{filename}}",failedUploadTimelapse:"上傳縮時攝影失敗",archiveDeleted:"歸檔已刪除",failedDeleteArchive:"刪除歸檔失敗",addedToFavorites:"已新增到收藏",removedFromFavorites:"已從收藏中移除",projectUpdated:"專案已更新",failedUpdateProject:"更新項目失敗",linkCopied:"連結已複製到剪貼簿",failedCopyLink:"複製連結失敗",photoDeleted:"照片已刪除",failedDeletePhoto:"刪除照片失敗",failedDeleteArchives:"刪除歸檔失敗",failedUpdateFavorites:"更新收藏失敗",exportDownloaded:"匯出已下載",exportFailed:"匯出失敗"},menu:{print:"列印",schedule:"排程",openInBambuStudio:"在切片軟體中開啟",slice:"切片",externalLink:"外部連結",viewOnMakerWorld:"在 MakerWorld 上檢視",preview3d:"3D 預覽",viewTimelapse:"檢視縮時攝影",scanForTimelapse:"掃描縮時攝影",uploadTimelapse:"上傳縮時攝影",removeTimelapse:"移除縮時攝影",downloadSource3mf:"下載源 3MF",uploadSource3mf:"上傳源 3MF",replaceSource3mf:"替換源 3MF",removeSource3mf:"移除源 3MF",uploadF3d:"上傳 F3D",replaceF3d:"替換 F3D",downloadF3d:"下載 F3D",removeF3d:"移除 F3D",download:"下載",copyDownloadLink:"複製下載連結",qrCode:"QR 碼",viewPhotos:"檢視照片",viewPhotosCount:"檢視照片 ({{count}})",projectPage:"專案頁面",addToFavorites:"新增到收藏",removeFromFavorites:"從收藏中移除",edit:"編輯",printLog:"列印記錄",goToProject:"前往專案：{{name}}",addToProject:"新增到專案",removeFromProject:"從專案中移除",loading:"載入中...",noProjectsAvailable:"無可用專案",searchProjects:"搜尋專案…",select:"選擇",deselect:"取消選擇",delete:"刪除"},permission:{noReprint:"您沒有重新列印此歸檔的權限",noAddToQueue:"您沒有新增到佇列的權限",noUpdateArchives:"您沒有更新歸檔的權限",noUploadFiles:"您沒有上傳檔案的權限",noDownload:"您沒有下載歸檔的權限",noCopyLink:"您沒有複製下載連結的權限",noDelete:"您沒有刪除此歸檔的權限",noCreate:"您沒有建立歸檔的權限"},platePicker:{title:"選擇要預覽的列印板",hint:"此存檔包含多個列印板。選擇一個在 GCode 檢視器中開啟。",plateLabel:"列印板 {{index}}",objectCount:"{{count}} 個物件",objectCount_plural:"{{count}} 個物件",noGcode:"此存檔沒有可預覽的已切片 G 代碼。請先在 Bambu Studio 中開啟並切片。"},card:{previousPlate:"上一個板",nextPlate:"下一個板",plateNumber:"板 {{index}}",moreOptions:"右鍵檢視更多選項",addToFavorites:"新增到收藏",removeFromFavorites:"從收藏中移除",cancelled:"已取消",failed:"失敗",duplicate:"重複",duplicateTitle:"此模型之前已列印過",openSource3mf:"在 Bambu Studio 中開啟源 3MF（右鍵檢視更多選項）",downloadF3d:"下載 Fusion 360 設計檔案",viewTimelapse:"檢視縮時攝影",viewPhoto:"檢視 1 張照片",viewPhotos:"檢視 {{count}} 張照片",openFolder:"開啟資料夾：{{name}}",slicedFile:"已切片檔案 - 可以列印",sourceFile:"僅原始檔 - 無 AMS 對應可用",gcode:"GCODE",source:"原始檔",project:"專案：{{name}}",runsBadge:"{{count}} 次列印",runsBadgeTitle:"共 {{count}} 次列印 — 成功 {{successful}} 次，失敗 {{failed}} 次。點擊查看完整列印記錄。",estimated:"預計：{{time}}",actual:"實際：{{time}}",accuracy:"準確度：{{percent}}%",filament:"{{weight}} 克",layer:"{{count}} 層",layers:"{{count}} 層",object:"{{count}} 個物件",objects:"{{count}} 個物件",slicedFor:"為 {{model}} 切片",uploadedBy:"上傳者",noPermissionReprint:"您沒有重新列印的權限",noFileForReprint:"無可用的 3MF 檔案 — 列印紀錄時無法從印表機下載該檔案",noPermissionEdit:"您沒有編輯歸檔的權限",noPermissionDelete:"您沒有刪除歸檔的權限",reprint:"重新列印",schedulePrint:"排程列印",schedule:"排程",openInBambuStudio:"在切片軟體中開啟",openInBambuStudioToSlice:"在切片軟體中開啟進行切片",slice:"切片",externalLink:"外部連結",makerWorld:"MakerWorld：{{designer}}",viewProject:"檢視專案",noExternalLink:"無外部連結",preview3d:"3D 預覽",download:"下載",edit:"編輯",delete:"刪除"},runLog:{title:"列印記錄",modalTitle:"列印記錄 — {{name}}",modalTitleFallback:"此歸檔",empty:"此歸檔尚未記錄任何列印事件。",col:{date:"日期",status:"狀態",duration:"時長",filament:"耗材",cost:"成本"},status:{completed:"已完成",failed:"失敗",cancelled:"已取消",stopped:"已停止",skipped:"已略過",printing:"列印中"}},modal:{deleteArchive:"刪除歸檔",deleteConfirm:'確定要刪除"{{name}}"嗎？此操作無法復原。',deleteButton:"刪除",deletePurgeStats:"同時從快速統計中刪除此列印（耗材、時間、成本、能耗）",removeSource3mf:"移除源 3MF",removeSource3mfConfirm:'確定要從"{{name}}"中移除源 3MF 檔案嗎？這將刪除原始切片專案檔案。',removeButton:"移除",removeF3d:"移除 F3D",removeF3dConfirm:'確定要從"{{name}}"中移除 Fusion 360 設計檔案嗎？',removeTimelapse:"移除縮時攝影",removeTimelapseConfirm:'確定要從"{{name}}"中移除縮時攝影影片嗎？',timelapse:"{{name}} - 縮時攝影",selectTimelapse:"選擇縮時攝影",selectTimelapseDesc:"未找到自動匹配。請選擇此列印的縮時攝影：",deleteArchives:"刪除歸檔",deleteArchivesConfirm:"確定要刪除 {{count}} 個歸檔嗎？此操作無法復原。",deleteCount:"刪除 {{count}} 個"},page:{title:"歸檔",printsCount:"{{filtered}} / {{total}} 次列印",dropFilesHere:"將 .3mf 檔案拖放到此處",releaseToUpload:"放開以上傳",only3mfSupported:"僅支援 .3mf 檔案",close:"關閉",selected:"已選擇 {{count}} 個",selectAll:"全選",tags:"標籤",project:"專案",favorite:"收藏",delete:"刪除",toggledFavorites:"已切換 {{count}} 個歸檔的收藏狀態",failedUpdateFavorites:"更新收藏失敗",archivesDeleted:"已刪除 {{count}} 個歸檔",failedDeleteArchives:"刪除歸檔失敗",photoDeleted:"照片已刪除",failedDeletePhoto:"刪除照片失敗"},list:{name:"名稱",printer:"印表機",date:"日期",size:"大小",actions:"操作",hasTimelapse:"有縮時攝影"},log:{date:"日期",printName:"列印名稱",printer:"印表機",user:"使用者",status:"狀態",duration:"時長",filament:"耗材",allPrinters:"所有印表機",allUsers:"所有使用者",allStatuses:"所有狀態",cancelled:"已取消",skipped:"已跳過",dateFrom:"從",dateTo:"到",noEntries:"未找到列印日誌條目",showing:"顯示 {{count}} / {{total}} 條",rowsPerPage:"行數",page:"頁",prev:"上一頁",next:"下一頁",clearLog:"清除日誌",clearLogTitle:"清除列印日誌",clearLogConfirm:"所有列印日誌條目將被永久刪除。歸檔和佇列項目不受影響。此操作無法復原。確定要繼續嗎？",clearLogButton:"全部清除",cleared:"已清除 {{count}} 條日誌",clearFailed:"清除列印日誌失敗"}},queue:{filamentShort:{rowBadge:"所分配料盤的線材不足",rowTooltip:"調度程式已標記此項目。點擊播放查看各槽位的不足量，並決定是否仍要列印。",confirmTitle:"線材不足",confirmIntro:"所分配的料盤至少有一個槽位無法滿足。仍要列印嗎？",lineItem:"槽位 {{slot}}：需要 {{required}} g，剩餘 {{remaining}} g",unknown:"不明",printAnyway:"仍要列印"},title:"列印佇列",subtitle:"排程和管理您的列印任務",addToQueue:"新增到佇列",print:"列印",reprint:"重新列印",schedulePrint:"排程列印",editQueueItem:"編輯佇列項目",printToPrinters:"列印到 {{count}} 臺印表機",queueToPrinters:"佇列到 {{count}} 臺印表機",queueSelectedPlates:"將 {{count}} 個熱床加入佇列",selectAllPlates:"選擇全部 {{count}} 個熱床",deselectAll:"取消全選",printQueued:"已加入列印佇列",itemsQueued:"{{count}} 個任務已加入佇列",sending:"傳送中...",sendingProgress:"傳送中 {{current}}/{{total}}...",adding:"新增中...",addingProgress:"新增中 {{current}}/{{total}}...",savingProgress:"儲存中 {{current}}/{{total}}...",clearQueue:"清空佇列",clearHistory:"清除歷史",emptyQueue:"佇列為空",position:"位置",scheduledTime:"排程時間",moveUp:"上移",moveDown:"下移",startNow:"立即開始",printingInProgress:"列印進行中...",viewArchive:"檢視歸檔",viewInFileManager:"在檔案管理器中檢視",itemCount:"{{count}} 個項目",itemCount_plural:"{{count}} 個項目",dragToReorder:"拖曳以重新排序（僅限盡快）",reorderHint:'位置僅影響"儘快"項目。排程項目按設定時間執行。',sjf:{label:"SJF",tooltip:"最短任務優先 — 排程器優先處理較短的列印任務"},addedBy:"由 {{name}} 新增",nextInQueue:"佇列中的下一個",clearPlateSuccess:"列印板已清理 — 準備進行下一個列印",plateNumber:"板 {{index}}",quantity:"數量",quantityHint:"建立 {{count}} 個佇列項目",activeBatches:"活躍批次",batchProgress:"已完成 {{completed}}/{{total}}",cancelBatch:"取消剩餘",batchCancelled:"已取消剩餘批次項目",cancelBatchConfirmTitle:"取消批次",cancelBatchConfirmMessage:"取消此批次中所有剩餘的待處理項目？",batch:"批次",sections:{currentlyPrinting:"正在列印",queued:"佇列中",history:"歷史"},status:{pending:"等待中",waiting:"等待中",printing:"列印中",paused:"已暫停",completed:"已完成",failed:"失敗",skipped:"已跳過",cancelled:"已取消"},summary:{printing:"列印中",queued:"佇列中",totalTime:"總佇列時間",totalWeight:"總佇列重量",history:"歷史"},filter:{allPrinters:"所有印表機",unassigned:"未分配",allStatus:"所有狀態",allLocations:"所有位置",any:"任意"},sort:{byPosition:"按位置排序",byName:"按名稱排序",byPrinter:"按印表機排序",bySchedule:"按排程排序",byDate:"按日期排序",ascendingOldest:"升序（最舊優先）",descendingNewest:"降序（最新優先）"},badges:{staged:"已暫存",requiresPrevious:"需要前一個成功",autoPowerOff:"自動關機",gcodeInjection:"G-code"},empty:{title:"沒有排程的列印",description:'從歸檔頁面使用右鍵選單中的"排程"選項來排程列印，或拖放檔案開始。'},time:{asap:"儘快",overdue:"已逾期",now:"現在",lessThanMinute:"不到一分鐘",inMinutes:"{{count}} 分鐘後",inHours:"{{count}} 小時後"},actions:{stopPrint:"停止列印",startPrint:"開始列印",requeue:"重新佇列"},bulkEdit:{title:"編輯 {{count}} 個項目",title_plural:"編輯 {{count}} 個項目",description:"僅更改的設定將套用於所選項目。",printer:"印表機",noChange:"— 不更改 —",queueOptions:"佇列選項",staged:"暫存（手動開始）",autoPowerOff:"列印後自動關機",requirePrevious:"要求前一個成功",printOptions:"列印選項",bedLevelling:"熱床調平",flowCalibration:"流量校準",vibrationCalibration:"振動校準",layerInspection:"首層檢查",timelapse:"縮時攝影",useAms:"使用 AMS",applyChanges:"套用更改",selectAll:"全選",deselectAll:"取消全選",selected:"已選擇 {{count}} 個",editSelected:"編輯所選",cancelSelected:"取消所選"},confirm:{cancelTitle:"取消排程列印",cancelMessage:'確定要取消"{{name}}"嗎？',stopTitle:"停止列印",stopMessage:'確定要停止目前列印"{{name}}"嗎？這將取消印表機上的列印任務。',removeTitle:"從歷史中移除",removeMessage:'確定要從佇列歷史中移除"{{name}}"嗎？',clearHistoryTitle:"清除歷史",clearHistoryMessage:"確定要從歷史中移除所有 {{count}} 個項目嗎？",cancelButton:"取消列印",stopButton:"停止列印",thisPrint:"此列印",thisItem:"此項目"},toast:{cancelled:"佇列項目已取消",cancelFailed:"取消項目失敗",removed:"佇列項目已移除",removeFailed:"移除項目失敗",stopped:"列印已停止",stopFailed:"停止列印失敗",released:"列印已加入佇列",startFailed:"開始列印失敗",reorderFailed:"重新排序佇列失敗",historyCleared:"已清除 {{count}} 條歷史紀錄",clearHistoryFailed:"清除歷史失敗",updateFailed:"更新項目失敗",bulkCancelled:"已取消 {{count}} 個項目",bulkCancelFailed:"批次取消項目失敗"},timeline:{listView:"列表",timelineView:"時間線",unassigned:"未分配",noData:"當天沒有計畫的列印任務",allDoneBy:"所有列印預計在 {{time}} 前完成",staged:"暫存",filterAll:"全部顯示",filterPrinting:"列印中",filterQueued:"佇列中",time:{anyMoment:"即將完成",minutesLeft:"剩餘{{minutes}} 分鐘",hoursLeft:"剩餘{{hours}}小時",hoursMinutesLeft:"剩餘{{hours}}小時{{minutes}} 分鐘"},day:{previous:"前一天",next:"後一天",today:"今天"}},permissions:{noStopPrint:"您沒有停止列印的權限",noStartPrint:"您沒有開始列印的權限",noEdit:"您沒有編輯此佇列項目的權限",noCancel:"您沒有取消此佇列項目的權限",noRequeue:"您沒有重新佇列的權限",noRemove:"您沒有移除此佇列項目的權限",noClearHistory:"您沒有清除所有歷史的權限",noEditItems:"您沒有編輯佇列項目的權限",noCancelItems:"您沒有取消佇列項目的權限"}},backgroundDispatch:{unknownFile:"未知檔案",unknownPrinter:"未知印表機",startingPrints:"正在開始列印",progressSummary:"{{complete}}/{{total}} 完成 • 已分發：{{dispatched}} • 處理中：{{processing}}",expandDetails:"展開分發詳情",collapseDetails:"收起分發詳情",dismissToast:"關閉分發通知",cancelDispatchJob:"取消分發任務",cancel:"取消",cancelling:"取消中…",awaitingPrinter:"等待印表機…",status:{dispatched:"已分發",processing:"處理中",completed:"已完成",failed:"失敗",cancelled:"已取消"},toast:{cancellingUpload:"取消上傳中...",cancelled:"分發已取消",cancelFailed:"取消分發失敗",completeWithFailures:"後台分發完成：{{completed}} 成功，{{failed}} 失敗",completeSuccess:"後台分發完成：{{completed}} 成功",printStartedRemaining:"{{completed}} 個列印已開始，{{remaining}} 個正在傳送..."}},stats:{title:"統計",subtitle:"拖曳小工具以重新排列。點選眼睛圖示隱藏。",overview:"概覽",totalPrints:"總列印次數",successRate:"成功率",totalPrintTime:"總列印時間",printTime:"列印時間",totalFilament:"總耗材用量",filamentUsed:"耗材用量",filamentCost:"耗材成本",totalCost:"總成本",energyUsed:"能耗",energyCost:"能源成本",energyWarmingUpTooltip:"能耗追蹤正在收集每小時快照。當所選範圍之前至少存在一個快照時，時間段合計將變得準確。早期數值可能偏低。",averagePrintTime:"平均列印時間",printsPerDay:"每日列印次數",byPrinter:"按印表機",printsByPrinter:"各印表機列印次數",byMaterial:"按材料",byMonth:"按月份",last7Days:"最近 7 天",last30Days:"最近 30 天",last90Days:"最近 90 天",allTime:"全部時間",quickStats:"快速統計",printActivity:"列印活動",filamentTypes:"耗材類型",filamentTrends:"耗材趨勢",failureAnalysis:"失敗分析",timeAccuracy:"時間準確度",successful:"成功：",failed:"失敗：",cancelled:"已取消：",perfectEstimate:"100% = 完美估計",noTimeAccuracyData:"尚無時間準確度資料",noFilamentData:"尚無耗材資料",noPrinterData:"尚無印表機資料",noPrintData:"尚無列印資料",noPrintDataLast30Days:"最近 30 天無列印資料",failureReasons:"失敗原因",topFailureReasons:"主要失敗原因",failedPrintsCount:"{{failed}} / {{total}} 次列印失敗",lastWeekRate:"上週：{{rate}}%",resetLayout:"重設佈局",recalculateCosts:"重新計算成本",recalculateCostsHint:"使用目前耗材價格重新計算所有歸檔成本",exportStats:"匯出統計",exportAsCsv:"匯出為 CSV",exportAsExcel:"匯出為 Excel",hiddenCount:"{{count}} 個已隱藏",exportDownloaded:"匯出已下載",exportFailed:"匯出失敗",layoutReset:"佈局已重設",recalculatedCosts:"已為 {{count}} 個歸檔重新計算成本",recalculateFailed:"重新計算成本失敗",loadingStats:"載入統計資料中...",noPermissionResetLayout:"您沒有重設佈局的權限",noPermissionRecalculate:"您沒有重新計算成本的權限",noPrintDataInRange:"所選範圍內無列印資料",periodFilament:"期間耗材",periodCost:"期間成本",avgPerPrint:"每次列印平均",usageOverTime:"隨時間的使用量",filamentByWeight:"重量",printDuration:"列印時長",printerUtilization:"印表機利用率",filamentSuccess:"按材料成功率",printHabits:"列印習慣",printTimeOfDay:"列印時段",colorDistribution:"顏色分佈",noColorData:"尚無顏色資料",records:"紀錄",longestPrint:"最長列印",heaviestPrint:"最重列印",mostExpensivePrint:"最貴列印",busiestDay:"最忙碌的一天",successStreak:"連續成功",streakPrint:"連續列印",streakPrints:"{{count}} 次連續列印",printerStats:"印表機統計",hours:"小時",avgPrints:"平均列印",noArchiveData:"尚無列印資料",filamentByTime:"時間",avgWeight:"平均重量",avgTime:"平均時間",filamentByPrints:"列印次數",timeframe:{today:"今天","this-week":"本週","this-month":"本月","last-7":"最近 7 天","last-30":"最近 30 天","last-90":"最近 90 天","this-year":"今年","all-time":"全部時間",custom:"自訂範圍",from:"從",to:"到"},allUsers:"所有使用者",noUser:"無使用者（系統）",filterByUser:"按使用者篩選"},maintenance:{title:"維護",overview:"概覽",allOk:"所有維護均已完成",dueCount:"{{count}} 項到期",dueCount_plural:"{{count}} 項到期",warningCount:"{{count}} 個警告",warningCount_plural:"{{count}} 個警告",totalPrintTime:"總列印時間",nextMaintenance:"下次維護",nothingDue:"無到期項目",tasks:"任務",lastPerformed:"上次執行",interval:"間隔",hoursRemaining:"剩餘 {{hours}} 小時",hoursOverdue:"逾期 {{hours}} 小時",markDone:"標記為完成",performMaintenance:"執行維護",history:"歷史",noHistory:"無維護歷史",editPrintHours:"編輯列印時間",currentHours:"目前小時數",statusTab:"狀態",settingsTab:"設定",overdueCount:"{{count}} 個逾期",dueSoonCount:"{{count}} 個即將到期",dueSoon:"即將到期",allGood:"一切正常",overdueBy:"逾期 {{duration}}",dueIn:"{{duration}} 後到期",timeLeft:"剩餘 {{duration}}",day:"1 天",days:"{{count}} 天",week:"1 週",weeks:"{{count}} 週",month:"1 個月",months:"{{count}} 個月",year:"1 年",maintenanceTypes:"維護類型",maintenanceTypesDescription:"系統類型和您的自訂維護任務",addCustomType:"新增自訂類型",restoreDefaults:"恢復預設任務",intervalType:"間隔類型",intervalValue:"間隔 ({{type}})",icon:"圖示",documentationLink:"說明文件連結（可選）",assignToPrinters:"分配給印表機",selectAtLeastOnePrinter:"至少選擇一臺印表機",addType:"新增類型",custom:"自訂",printHours:"列印小時數",calendarDays:"日曆天數",exampleName:"例如：更換 HEPA 過濾器",viewDocumentation:"檢視說明文件",timeBasedInterval:"基於時間的間隔",intervalOverrides:"間隔覆蓋",intervalOverridesDescription:"為特定印表機自訂間隔",assignedToPrinters:"已分配給印表機：",noPrintersAssigned:"未分配印表機",addPrinterShort:"新增：",printersAssignedClick:"已分配 {{count}} 臺印表機 - 點選管理",removeFromPrinter:"從此印表機移除",types:{lubricateCarbonRods:"潤滑碳纖維杆",lubricateRails:"潤滑線性導軌",cleanNozzle:"清潔噴嘴/熱端",checkBelts:"檢查皮帶張力",cleanBuildPlate:"清潔列印板",checkExtruder:"檢查擠出機齒輪",checkCooling:"檢查冷卻風扇",generalInspection:"綜合檢查",cleanCarbonRods:"清潔碳纖維杆",lubricateSteelRods:"潤滑鋼杆",cleanSteelRods:"清潔鋼杆",cleanLinearRails:"清潔線性導軌",checkPtfeTube:"檢查 PTFE 管",replaceHepaFilter:"更換 HEPA 過濾器",replaceCarbonFilter:"更換活性炭過濾器",lubricateLeftNozzleRail:"潤滑左噴嘴導軌"},maintenanceComplete:"維護已標記為完成",typeUpdated:"維護類型已更新",typeDeleted:"維護類型已刪除",defaultsRestored:"已恢復 {{count}} 個預設任務",printHoursUpdated:"列印小時數已更新",printerAssigned:"印表機已分配",printerRemoved:"印表機已移除",deleteTypeConfirm:'刪除"{{name}}"？',deleteSystemTypeTitle:"刪除預設維護任務？",deleteSystemTypeMessage:'確定要刪除預設維護任務"{{name}}"嗎？',noPermissionUpdate:"您沒有更新維護項目的權限",noPermissionPerform:"您沒有執行維護的權限",noPermissionEditTypes:"您沒有編輯維護類型的權限",noPermissionDeleteTypes:"您沒有刪除維護類型的權限",noPermissionEditHours:"您沒有編輯列印時間的權限",noPermissionRemovePrinter:"您沒有移除印表機分配的權限",noPermissionAssignPrinter:"您沒有分配印表機的權限",noPermissionEditIntervals:"您沒有編輯間隔的權限",configureSettings:"設定維護類型和間隔"},settings:{title:"設定",general:"通用",tabs:{general:"通用",smartPlugs:"智慧插座",notifications:"通知",queue:"工作流程",filament:"耗材",network:"網路",apiKeys:"API 金鑰",virtualPrinter:"虛擬印表機",spoolbuddy:"SpoolBuddy",failureDetection:"故障檢測",users:"身份驗證",backup:"備份",emailAuth:"信箱認證",ldap:"LDAP",twoFa:"雙因素認證",oidc:"SSO / OIDC",security:"安全"},spoolbuddy:{infoTitle:"SpoolBuddy 裝置",infoBody:"SpoolBuddy kiosk 透過心跳自動註冊。如果裝置不再使用，或守護程式當機遺留了過時的重複項，可在此取消註冊。",duplicatesTitle:"已註冊 {{count}} 台裝置",duplicatesBody:"kiosk 介面只使用最先註冊的裝置。如果其中有因當機遺留的過時重複項，請取消註冊它——線上裝置會在下次心跳時重新註冊自己。",empty:"尚未註冊任何 SpoolBuddy 裝置。",online:"線上",offline:"離線",unregister:"取消註冊",unregisterSuccess:"裝置已取消註冊",unregisterError:"取消註冊裝置失敗",confirmTitle:"取消註冊 SpoolBuddy 裝置？",confirmBody:'將從資料庫中移除 "{{hostname}}" ({{deviceId}})。如果裝置線上，會在下次心跳時重新註冊自己。',ipAddress:"IP 位址",firmware:"韌體",lastSeen:"上次線上",daemonUptime:"守護程式執行時間",systemUptime:"系統執行時間",never:"從未",nfc:"NFC",scale:"磅秤",cpuTemp:"CPU 溫度",cpuLoad:"CPU 負載",memory:"記憶體",disk:"磁碟",update:"更新",updateConfirmTitle:"更新 SpoolBuddy 守護程式？",updateConfirmBody:'對 "{{hostname}}" 觸發軟體更新？更新完成後守護程式將重新啟動。',restartBrowser:"重新啟動瀏覽器",restartBrowserConfirmTitle:"重新啟動 kiosk 瀏覽器？",restartBrowserConfirmBody:'在 "{{hostname}}" 上重新啟動 kiosk 瀏覽器？顯示將短暫黑屏。',restartDaemon:"重新啟動守護程式",restartDaemonConfirmTitle:"重新啟動 SpoolBuddy 守護程式？",restartDaemonConfirmBody:'在 "{{hostname}}" 上重新啟動 SpoolBuddy 守護程式？裝置將離線幾秒鐘。',reboot:"重新開機",rebootConfirmTitle:"重新開機？",rebootConfirmBody:'重新開機 "{{hostname}}"？裝置將離線約一分鐘。',shutdown:"關機",shutdownConfirmTitle:"關閉裝置？",shutdownConfirmBody:'關閉 "{{hostname}}"？您需要實體存取才能重新開機。',commandConfirm:"確認",commandQueued:"命令已加入佇列",commandError:"傳送命令失敗"},ldap:{title:"LDAP 認證",enabledDesc:"LDAP 認證已啟用",disabledDesc:"LDAP 認證已停用",disabledHint:"在下方設定並儲存 LDAP 設定，然後啟用。",enabled:"LDAP 認證已啟用",disabled:"LDAP 認證已停用",feature1:"使用者可以使用 LDAP 憑據登入",feature2:"本機管理員帳戶作為後備保留",feature3:"登入時 LDAP 群組對應到 BamBuddy 群組",serverConfig:"LDAP 伺服器設定",serverUrl:"伺服器 URL",serverUrlHint:"使用 ldap:// 進行標準連線或 ldaps:// 進行 SSL 連線",security:"安全",securityHint:"StartTLS 將普通連線升級為 TLS。LDAPS 從一開始就使用 TLS。",bindDn:"繫結 DN（服務帳戶）",bindPassword:"繫結密碼",searchBase:"搜尋基礎 DN",userFilter:"使用者搜尋過濾器",userFilterHint:"{username} 替換為登入使用者名稱。OpenLDAP 使用 (uid={username})。",advanced:"進階",autoProvision:"自動建立使用者",autoProvisionHint:"首次 LDAP 登入時自動建立 BamBuddy 帳戶",defaultGroup:"預設群組",defaultGroupNone:"— 無（無復原）—",defaultGroupHint:"當 LDAP 使用者透過身份驗證但不在任何已對應的 LDAP 群組中時分配的備援群組。留空以使未對應的使用者沒有權限。",groupMapping:"群組對應（JSON）",groupMappingHint:"將 LDAP 群組 DN 對應到 BamBuddy 群組。可用群組：",testConnection:"測試連線",settingsSaved:"LDAP 設定已儲存",errors:{serverRequired:"LDAP 伺服器 URL 為必填項",searchBaseRequired:"搜尋基礎 DN 為必填項",enableAuthFirst:"請先啟用認證",configureLdapFirst:"請先儲存 LDAP 設定"}},email:{smtpSettings:"SMTP 設定",smtpHost:"SMTP 伺服器",smtpPort:"SMTP 連接埠",security:"安全",authentication:"認證",username:"使用者名稱",password:"密碼",fromEmail:"寄件信箱",fromName:"寄件人名稱",testConnection:"測試 SMTP 連線",testRecipient:"測試收件信箱",sendTest:"傳送測試郵件",sending:"傳送中...",save:"儲存設定",saving:"儲存中...",advancedAuth:"進階認證",advancedAuthEnabled:"進階認證已啟用",advancedAuthEnabledDesc:"基於信箱的使用者管理功能已啟用。新使用者將透過郵件收到自動產生的密碼，使用者可以透過忘記密碼功能重設密碼。",advancedAuthDisabled:"進階認證已停用",advancedAuthDisabledDesc:"啟用進階認證以啟用基於信箱的使用者管理功能。",enable:"啟用",disable:"停用",feature1:"密碼自動產生並透過郵件傳送給新使用者",feature2:"使用者可以使用使用者名稱或信箱登入",feature3:"忘記密碼功能可用",feature4:"管理員可以透過郵件重設使用者密碼",errors:{requiredFields:"請填寫所有必填欄位",usernameRequired:"啟用認證時需要使用者名稱",enterTestEmail:"請輸入測試信箱地址",smtpServerAndEmail:"測試前請填寫 SMTP 伺服器和寄件信箱",usernamePasswordRequired:"啟用認證時需要使用者名稱和密碼",configureSmtpFirst:"請先設定並測試 SMTP 設定",enableAuthFirst:"請先啟用身份驗證才能使用基於電子郵件的功能。"},success:{settingsSaved:"SMTP 設定儲存成功"},securityOptions:{starttls:"STARTTLS（連接埠 587）",ssl:"SSL/TLS（連接埠 465）",none:"無（連接埠 25）"},authOptions:{enabled:"已啟用",disabled:"已停用"}},appearance:"外觀",notifications:"通知",smartPlugs:"智慧插座",spoolman:"Spoolman",updates:"更新",language:"語言",languageDescription:"選擇您的首選語言",theme:"主題",themeLight:"淺色",themeDark:"深色",themeSystem:"跟隨系統",defaultView:"預設檢視",defaultViewDescription:"開啟應用程式時顯示的頁面",checkForUpdates:"檢查更新",autoUpdate:"自動更新",currentVersion:"目前版本",latestVersion:"最新版本",upToDate:"已是最新版本",updateAvailable:"有可用更新",notificationLanguage:"通知語言",notificationLanguageDescription:"推送通知的語言",bedCooledThreshold:"熱床冷卻閾值",bedCooledThresholdDescription:"列印後熱床被視為已冷卻的溫度",userNotificationsEnabled:"使用者通知",userNotificationsEnabledDescription:"啟用使用者通知選單和列印任務事件的郵件通知。需要進階身份驗證。",userNotificationsDisabledHint:"請啟用進階身份驗證以使用使用者通知。",notificationProviders:"通知提供者",addProvider:"新增提供者",editProvider:"編輯提供者",providerType:"提供者類型",testNotification:"測試通知",testSuccess:"測試通知傳送成功",testFailed:"傳送測試通知失敗",quietHours:"免打擾時間",quietHoursDescription:"在此時間段內不傳送通知",quietHoursStart:"開始",quietHoursEnd:"結束",events:{title:"通知事件",printStart:"列印開始",printComplete:"列印完成",printFailed:"列印失敗",printStopped:"列印停止",printProgress:"進度里程碑",printProgressDescription:"在 25%、50%、75% 時通知",printerOffline:"印表機離線",printerError:"印表機錯誤",filamentLow:"耗材不足",maintenanceDue:"維護到期",maintenanceDueDescription:"需要維護時通知"},smartPlug:{title:"智慧插座",add:"新增智慧插座",edit:"編輯智慧插座",name:"名稱",ipAddress:"IP 位址",linkedPrinter:"連結印表機",autoOn:"自動開啟",autoOnDescription:"列印開始時開啟",autoOff:"自動關閉",autoOffDescription:"列印完成後關閉",offDelay:"關閉延遲",offDelayMinutes:"列印後分鐘數",offDelayTemp:"當噴嘴溫度低於",currentState:"目前狀態",turnOn:"開啟",turnOff:"關閉"},filamentTracking:"耗材追蹤",filamentTrackingDesc:"選擇如何追蹤您的耗材。您可以使用內建庫存或連線外部 Spoolman 伺服器。",filamentChecks:"耗材檢查",disableFilamentWarnings:"停用耗材警告",disableFilamentWarningsDesc:"在列印或加入佇列時不顯示耗材不足警告",preferLowestFilament:"優先使用剩餘最少的耗材",preferLowestFilamentDesc:"當多個料盤匹配時，使用剩餘耗材最少的那個",trackingModeBuiltIn:"內建庫存",trackingModeBuiltInDesc:"包含 RFID 自動匹配和用量追蹤",trackingModeSpoolmanDesc:"外部耗材管理伺服器",builtInFeatureRfid:"自動檢測 AMS 中的拓竹 RFID 耗材",builtInFeatureUsage:"追蹤每次列印的耗材消耗",builtInFeatureCatalog:"管理耗材、顏色和 K 值設定檔案",builtInFeatureThirdParty:"第三方耗材可分配到庫存耗材",amsSyncButton:"從 AMS 同步重量",amsSyncTitle:"從 AMS 同步耗材重量",amsSyncMessage:"這將使用已連線印表機的目前 AMS 剩餘百分比值覆蓋所有庫存耗材重量。用於從損壞的重量資料中恢復。印表機必須線上。",amsSyncing:"同步中...",amsSyncSuccess:"已同步 {{synced}} 個耗材，跳過 {{skipped}} 個",amsSyncError:"從 AMS 同步重量失敗",spoolmanAmsSyncButton:"從 AMS 同步 Spoolman 重量",spoolmanAmsSyncTitle:"從 AMS 同步 Spoolman 耗材重量",spoolmanAmsSyncMessage:"這將根據已連線印表機的目前 AMS 剩餘百分比值更新所有 Spoolman 耗材重量。印表機必須線上。",spoolmanAmsSyncing:"同步中...",spoolmanAmsSyncSuccess:"已同步 {{synced}} 個 Spoolman 耗材，跳過 {{skipped}} 個",spoolmanAmsSyncError:"從 AMS 同步 Spoolman 重量失敗",spoolmanAmsSyncErrorUnreachable:"同步失敗（Spoolman 無法存取）",spoolmanAmsSyncErrorNotConfigured:"同步失敗（Spoolman 未設定）",spoolmanNotConfigured:"Spoolman 未設定",spoolmanFilamentCatalogTitle:"Spoolman 耗材目錄",spoolmanFilamentCatalogDesc:"來自 Spoolman 的耗材名稱和皮重。名稱和線軸重量可在此處編輯；其他屬性請直接在 Spoolman 中管理。",spoolmanUrl:"Spoolman URL",spoolmanUrlHint:"Spoolman 伺服器的 URL（例如 http://localhost:7912）",spoolmanConnected:"已連線",spoolmanDisconnected:"未連線",status:"狀態",connect:"連線",disconnect:"斷開",howSyncWorks:"同步工作原理",syncInfoRfidOnly:"僅同步帶有 RFID 的官方拓竹耗材",syncInfoAutoCreate:"首次同步時自動在 Spoolman 中建立新耗材",syncInfoThirdPartySkipped:"非拓竹耗材（第三方、重新填充的）將被跳過",linkingExistingSpools:"連結現有耗材",linkingExistingSpoolsDesc:'要將現有的 Spoolman 耗材連結到您的 AMS，請將滑鼠懸停在 AMS 槽位上並點選"連結到 Spoolman"。',syncMode:"同步模式",syncModeAuto:"自動",syncModeManual:"僅手動",syncModeAutoDesc:"偵測到更改時自動同步 AMS 資料",syncModeManualDesc:"僅在手動觸發時同步",syncAmsData:"同步 AMS 資料",syncAmsDataDesc:"手動將印表機 AMS 資料同步到 Spoolman",allPrinters:"所有印表機",noDefaultPrinter:"無預設（每次詢問）",sidebarOrder:"側邊欄順序",saveThumbnails:"儲存縮圖",captureFinishPhoto:"拍攝完成照片",noPrintersConfigured:"未設定印表機",archiveMode:{always:"始終建立歸檔條目",never:"從不建立歸檔條目",ask:"每次詢問"},checkForUpdatesLabel:"檢查更新",checkPrinterFirmware:"檢查印表機韌體",includeBetaUpdates:"包含測試版本",includeBetaUpdatesDesc:"檢查更新時通知測試版和預發布版本",enableRetry:"啟用重試",homeAssistantDescription:"透過 Home Assistant 控制智慧插座",environmentManagedLabel:"（環境變數管理）",autoEnabledViaEnv:"透過環境變數自動啟用",urlFromEnvReadOnly:"值由 HA_URL 環境變數設定（只讀）",tokenFromEnvReadOnly:"值由 HA_TOKEN 環境變數設定（只讀）",mqttConnectedTo:"已連線到",prometheusDescription:"以 Prometheus 格式暴露印表機資料",noSmartPlugsTitle:"未設定智慧插座",noSmartPlugsDescription:"新增基於 Tasmota 的智慧插座以追蹤能耗並自動化電源控制。",noProvidersTitle:"未設定提供者",noProvidersDescription:"新增提供者以接收警報。",noTemplatesAvailable:"無可用範本。重新啟動後端以載入預設範本。",apiPermissionView:"檢視印表機狀態和佇列",apiPermissionEdit:"新增和移除列印佇列中的項目",apiKeysEmptyTitle:"無 API 金鑰",apiKeysEmptyDescription:"建立 API 金鑰以與外部服務整合。",noUsersFound:"未找到使用者",noGroupsFound:"未找到群組",noGroupsAvailable:"無可用群組",passwordsDoNotMatch:"密碼不符",systemGroupWarning:"系統群組名稱不可更改",authDisabledTitle:"身份驗證已停用",authDisabledFeature1:"需要登入才能存取系統",authDisabledFeature2:"建立多個使用者並基於群組的權限管理",authDisabledFeature3:"使用 50+ 個細粒度權限控制存取",userHasCreated:"此使用者已建立：",userItemsQuestion:"您想如何處理這些項目？",deleteUserConfirm:"確定要刪除此使用者嗎？",actionCannotBeUndone:"此操作無法復原。",addFirstSmartPlug:"新增您的第一個智慧插座",providers:"提供者",log:"日誌",testAll:"全部測試",testResults:"測試結果",testPassedCount:"{{count}} 個透過",testFailedCount:"{{count}} 個失敗",messageTemplates:"訊息範本",messageTemplatesDescription:"自訂每個事件的通知訊息。",apiKeys:"API 金鑰",apiKeysDescription:"建立 API 金鑰用於外部整合和 Webhook。",createKey:"建立金鑰",apiKeyCreated:"API 金鑰建立成功",apiKeyCopyWarning:"請立即複製此金鑰 - 它不會再次顯示！",useInApiBrowser:"在 API 瀏覽器中使用",createNewApiKey:"建立新 API 金鑰",keyName:"金鑰名稱",keyNamePlaceholder:"例如：Home Assistant、OctoPrint",readStatus:"讀取狀態",readStatusDescription:"檢視印表機狀態和佇列",manageQueue:"管理佇列",manageQueueDescription:"新增和移除列印佇列中的項目",controlPrinter:"控制印表機",controlPrinterDescription:"暫停、繼續和停止列印",manageLibrary:"管理資料庫",manageLibraryDescription:"上傳、重新命名與刪除資料庫檔案；從 MakerWorld 匯入模型",manageInventory:"管理庫存",manageInventoryDescription:"建立、更新與刪除耗材盤與庫存記錄。SpoolBuddy 終端（NFC 掃描、秤讀取、終端系統指令）需要此權限。",libraryBadge:"資料庫",inventoryBadge:"庫存",cloudAccess:"允許雲端存取",cloudAccessDescription:"代表您讀取 Bambu Cloud 預設和耗材。需要登入 Bambu Cloud。",cloudBadge:"雲端",updateEnergyCost:"更新電價",updateEnergyCostDescription:"允許此金鑰向 /settings/electricity-price POST 新的每千瓦時電價。適用於 Home Assistant 動態電價自動化（Tibber、Octopus 等）。這是唯一可透過 API 金鑰寫入的設定欄位。",energyCostBadge:"能耗",legacyKey:"舊版",legacyKeyTooltip:"在按使用者所有權之前建立；需重建以使用雲端存取",unnamedKey:"未命名金鑰",lastUsed:"上次使用",read:"讀取",control:"控制",createFirstKey:"建立您的第一個金鑰",webhookEndpoints:"Webhook 端點",webhookApiKeyHint:"在 X-API-Key 請求頭中使用您的 API 金鑰。",webhook:{getAllStatus:"獲取所有印表機狀態",getSpecificStatus:"獲取特定印表機狀態",addToQueue:"新增到列印佇列",pausePrint:"暫停列印",resumePrint:"繼續列印",stopPrint:"停止列印"},apiBrowser:"API 瀏覽器",apiBrowserDescription:"瀏覽和測試所有可用的 API 端點。",apiKeyForTesting:"測試用 API 金鑰",apiKeyPlaceholder:"在此貼上您的 API 金鑰以測試需要認證的端點...",apiKeyHint:"此金鑰將作為 X-API-Key 請求頭隨請求傳送。",deleteApiKeyTitle:"刪除 API 金鑰",deleteApiKeyMessage:"確定要刪除此 API 金鑰嗎？使用此金鑰的所有整合將停止工作。",deleteKey:"刪除金鑰",amsDisplayThresholds:"AMS 顯示閾值",amsThresholdsDescription:"設定 AMS 濕度和溫度指示器的顏色閾值。",humidity:"濕度",goodGreen:"良好（綠色）",fairOrange:"一般（橙色）",aboveFairBad:"超過一般閾值顯示為紅色（差）",fairAlsoDryingThreshold:"此閾值也用於觸發自動乾燥",temperature:"溫度",goodBlue:"良好（藍色）",aboveFairHot:"超過一般閾值顯示為紅色（熱）",historyRetention:"歷史保留",keepSensorHistory:"保留感測器歷史",historyRetentionDescription:"較舊的濕度和溫度資料將被自動刪除",defaultPrintOptions:"預設列印選項",defaultPrintOptionsDescription:"設定新列印的預設選項值。可在列印對話方塊中逐次覆蓋。",defaultBedLevelling:"熱床調平",defaultBedLevellingDesc:"列印前自動調平熱床",defaultFlowCali:"流量校準",defaultFlowCaliDesc:"校準擠出流量",defaultVibrationCali:"振動校準",defaultVibrationCaliDesc:"減少振紋偽影",defaultLayerInspect:"首層檢測",defaultLayerInspectDesc:"AI首層檢測",defaultTimelapse:"縮時攝影",defaultTimelapseDesc:"錄製縮時攝影影片",staggeredStart:"錯開啟動",staggeredStartDescription:"多台印表機批次啟動時的預設群組大小與間隔。可在列印對話框中逐批覆寫。",plateClear:"熱床清空確認",requirePlateClear:"需要熱床清空確認",requirePlateClearDescription:"啟用後，排程器會在已完成列印的印表機上啟動佇列列印之前，等待每臺印表機的熱床清空確認。停用後，也會隱藏印表機卡片上的列印板狀態標記和「將列印板標記為已清理」按鈕。",gcodeInjection:"G-code注入",gcodeInjectionDescription:'為Farmloop、SwapMod、AutoClear和Printflow 3D等自動列印系統設定自訂G-code，在列印開始和/或結束時注入。程式碼片段按印表機型號設定，在佇列項目上啟用"注入G-code"時套用。',gcodeInjectionNoPrinters:"未找到印表機。新增印表機以設定G-code程式碼片段。",gcodeStartLabel:"開始G-code",gcodeEndLabel:"結束G-code",gcodeStartPlaceholder:"在列印開始前插入的G-code...",gcodeEndPlaceholder:"在列印結束後追加的G-code...",staggerGroupSize:"群組大小",staggerGroupSizeHelp:"每個群組要同時啟動的印表機數量",staggerInterval:"間隔（分鐘）",staggerIntervalHelp:"每個群組啟動之間的延遲",queueDrying:"自動乾燥",queueDryingDescription:"在佇列列印之間，印表機空閒時自動乾燥AMS耗材。使用上方的濕度閾值觸發乾燥。",queueDryingEnabled:"啟用自動乾燥",queueDryingEnabledDescription:"當印表機空閒且濕度超過閾值時，自動啟動AMS乾燥",queueDryingBlock:"等待乾燥完成",queueDryingBlockDescription:"阻止列印佇列直到乾燥完成。關閉時，列印優先於乾燥。",ambientDryingEnabled:"環境乾燥",ambientDryingEnabledDescription:"當空閒印表機的濕度超過閾值時自動乾燥耗材，無需佇列列印。",dryingPresets:"乾燥預設",dryingPresetsDescription:"每種耗材類型的溫度和時長。AMS 2 Pro使用較低溫度，AMS-HT支援較高溫度。",dryingFilament:"耗材",printModal:"列印對話方塊",expandCustomMapping:"預設展開自訂對應",expandCustomMappingDescription:"列印到多臺印表機時，預設展開顯示每臺印表機的 AMS 對應",authentication:"身份驗證",authEnabledDescription:"您的實例已透過使用者身份驗證保護",authDisabledDescription:"啟用以要求登入並管理使用者存取",authDisabledMessage:"啟用身份驗證以建立使用者帳戶、管理權限並保護您的 Bambuddy 實例。",enableAuthentication:"啟用身份驗證",currentUser:"目前使用者",changePassword:"修改密碼",admin:"管理員",users:"使用者",addUser:"新增使用者",groups:"群組",addGroup:"新增群組",system:"系統",noDescription:"無描述",userCount:"{{count}} 個使用者",permissionCount:"{{count}} 個權限",createUser:"建立使用者",username:"使用者名稱",enterUsername:"輸入使用者名稱",password:"密碼",enterPassword:"輸入密碼",passwordRequirements:"至少 8 個字元，包含一個大寫、一個小寫、一個數字和一個特殊字元。",confirmPassword:"確認密碼",confirmPasswordPlaceholder:"確認密碼",viewReleaseOnGitHub:"在 GitHub 上檢視發布",turnAllPlugsOn:"開啟所有插座",turnAllPlugsOff:"關閉所有插座",clearNotificationLogs:"清除通知日誌",clearLogsMessage:"這將永久刪除所有 30 天前的通知日誌。此操作無法復原。",clearLogs:"清除日誌",resetUiPreferences:"重設 UI 偏好",resetUiPreferencesMessage:"這將重設所有 UI 偏好為預設值：側邊欄順序、主題、儀表板佈局、檢視模式和排序偏好。您的印表機、歸檔和伺服器設定不會受到影響。清除後頁面將重新載入。",resetPreferences:"重設偏好",deleteGroupTitle:"刪除群組",deleteGroupMessage:"確定要刪除此群組嗎？此群組中的使用者將失去這些權限。",deleteGroup:"刪除群組",disableAuthenticationTitle:"停用身份驗證",disableAuthenticationMessage:"確定要停用身份驗證嗎？這將使您的 Bambuddy 實例無需登入即可存取。所有使用者將保留在資料庫中但身份驗證將被停用。",disableAuthentication:"停用身份驗證",configureBambuddy:"設定 Bambuddy",systemDefault:"系統預設",archiveSettings:"歸檔設定",newWindow:"新視窗",embeddedOverlay:"嵌入式疊加層",preferredSlicer:"首選切片軟體",preferredSlicerDescription:"選擇要用於開啟檔案的切片軟體",orcaslicerKnownIssuesWarning:"OrcaSlicer 2.3.2 / 2.4.0-dev 存在已知 CLI 錯誤，無法切片許多 Bambu 建立的 3MF — 見上游 issue #12426（繪製的多擠出機檔案 segfault）和 #13386（參數範圍嚴格驗證拒絕）。在上游修復發布之前，推薦使用 Bambu Studio。",useSlicerApi:"使用切片器 API",useSlicerApiDescription:"開啟時，「切片」操作開啟應用程式內切片器對話框並呼叫 slicer-API sidecar。關閉時（預設），透過 URI 方案交給桌面切片器。",slicerCard:"切片器",orcaslicerApiUrl:"OrcaSlicer sidecar URL",bambuStudioApiUrl:"Bambu Studio sidecar URL",slicerApiUrlDescription:"slicer-API sidecar 容器的 URL。留空以使用 SLICER_API_URL / BAMBU_STUDIO_API_URL 環境變數預設值。",slicerBundles:{title:"切片器捆綁包",description:'匯入從 BambuStudio 匯出的 Printer Preset Bundle (.bbscfg)（檔案 → 匯出 → 匯出預設捆綁包 → "Printer preset bundle"）。匯入後，切片請求可以按名稱從捆綁包中選擇預設，無需重新上傳 JSON 設定三元組。',uploadButton:"上傳捆綁包",uploading:"上傳中…",loading:"載入捆綁包中…",empty:"尚未匯入捆綁包。",summary:"{{processCount}} 個製程 · {{filamentCount}} 個耗材預設",delete:"刪除",uploadSuccess:"已匯入 {{name}}",uploadError:"上傳捆綁包失敗：{{message}}",deleteSuccess:"捆綁包已移除",deleteError:"刪除捆綁包失敗：{{message}}",confirmDeleteTitle:"移除此捆綁包？",confirmDeleteMessage:"引用「{{name}}」的切片請求將失敗，直到捆綁包重新匯入。"},externalCameras:"外部攝影機",costTracking:"成本追蹤",printsOnly:"僅列印",totalConsumption:"總消耗",dataManagement:"資料管理",storageUsage:"儲存使用情況",storageUsageDescription:"按類別的資料使用情況明細",storageUsageTotal:"總計",storageUsageErrors:"錯誤",storageUsageOtherBreakdown:"其他（包括靜態資源、腳本和設定檔案）",storageUsageSystem:"系統",storageUsageData:"資料",storageUsageUnavailable:"儲存使用資訊不可用",clearNotificationLogsDescription:"刪除 30 天前的通知日誌",resetUiPreferencesDescription:"重設側邊欄順序、主題、檢視模式和佈局偏好。印表機、歸檔和設定不受影響。",enableHomeAssistant:"啟用 Home Assistant",enableMqtt:"啟用 MQTT",useTls:"使用 TLS",enableMetricsEndpoint:"啟用指標端點",availableMetrics:"可用指標",editUser:"編輯使用者",deleteUserTitle:"刪除使用者",groupName:"群組名稱",leaveEmptyForAnonymous:"留空為匿名",leaveEmptyForNoAuth:"留空為無認證",enterNewPassword:"輸入新密碼",confirmNewPassword:"確認新密碼",enterGroupName:"輸入群組名稱",enterDescriptionOptional:"輸入描述（可選）",enterCurrentPassword:"輸入目前密碼",enterNewPasswordMin6:"輸入新密碼（至少 6 個字元）",toast:{keyCopied:"金鑰已複製到剪貼簿",copyFailed:"複製金鑰失敗",keyAddedToBrowser:"金鑰已新增到 API 瀏覽器",clearLogsFailed:"清除日誌失敗",uiPreferencesReset:"UI 偏好已重設。重新整理中...",authDisabled:"身份驗證已成功停用",authDisableFailed:"停用身份驗證失敗",apiKeyCreated:"API 金鑰已建立",apiKeyDeleted:"API 金鑰已刪除",userCreated:"使用者建立成功",userUpdated:"使用者更新成功",userDeleted:"使用者刪除成功",groupCreated:"群組建立成功",groupUpdated:"群組更新成功",groupDeleted:"群組刪除成功",fillRequiredFields:"請填寫所有必填欄位",passwordsDoNotMatch:"密碼不符",passwordTooShort:"密碼至少需要 8 個字元",passwordNeedsUppercase:"密碼必須至少包含一個大寫字母",passwordNeedsLowercase:"密碼必須至少包含一個小寫字母",passwordNeedsDigit:"密碼必須至少包含一個數字",passwordNeedsSpecial:"密碼必須至少包含一個特殊字元",enterGroupName:"請輸入群組名稱",settingsSaved:"設定已儲存",noPermissionUpdate:"您沒有權限變更設定",cameraSettingsSaved:"攝影機設定已儲存",enterCameraUrl:"請輸入攝影機 URL",passwordChanged:"密碼修改成功",connectionFailed:"連線失敗",testFailed:"測試失敗",cameraConnected:"攝影機已連線{{resolution}}"},testConnection:"測試連線",catalog:{spoolCatalog:"耗材目錄",spoolCatalogDescription:"按品牌/類型的空耗材重量。用於新增耗材時的自動重量查詢。",searchCatalog:"搜尋目錄...",addNewEntry:"新增新條目",namePlaceholder:"名稱（例如：Bambu Lab - 塑膠）",weight:"重量",type:"類型",default:"預設",custom:"自訂",noMatch:"沒有條目匹配您的搜尋",empty:"目錄中沒有條目",deleteEntry:"刪除條目",deleteConfirm:'確定要刪除"{{name}}"嗎？',resetCatalog:"重設目錄",resetConfirm:"重設目錄為預設值？這將移除所有自訂條目。",loadFailed:"載入耗材目錄失敗",nameWeightRequired:"名稱和重量為必填項",entryAdded:"條目已新增",addFailed:"新增條目失敗",entryUpdated:"條目已更新",updateFailed:"更新條目失敗",entryDeleted:"條目已刪除",deleteFailed:"刪除條目失敗",resetSuccess:"目錄已重設為預設值",resetFailed:"重設目錄失敗",exported:"已匯出 {{count}} 條",imported:"已匯入 {{added}} 條（跳過 {{skipped}} 條）",importFailed:"匯入失敗：無效的 JSON 格式",exportTooltip:"匯出目錄為 JSON",importTooltip:"從 JSON 匯入目錄",resetTooltip:"重設為預設值",selectedCount:"已選擇 {{count}} 項",deleteSelected:"刪除所選",bulkDeleteConfirm:"確定要刪除 {{count}} 個條目嗎？",bulkDeleted:"已刪除 {{count}} 個條目",bulkDeleteFailed:"刪除條目失敗",material:"材料",spoolWeight:"線軸重量",color:"顏色",updateSpoolWeight:"更新線軸重量",filamentUpdated:"耗材已更新",filamentUpdateFailed:"更新耗材失敗",filamentUpdateInvalid:"耗材資料無效",keepExistingSpoolWeight:"保留現有線軸的舊重量",keepExistingSpoolWeightDesc:"已使用此耗材類型建立的線軸保留舊的皮重。新線軸使用更新後的值。",applyToAllSpools:"套用至所有線軸",applyToAllSpoolsDesc:"此耗材類型的所有重量計算立即使用新的皮重。"},colorCatalog:{title:"顏色目錄",description:"按製造商/材料的耗材顏色。用於新增耗材時的自動顏色查詢。",searchColors:"搜尋顏色...",allManufacturers:"所有製造商",addNewColor:"新增新顏色",manufacturer:"製造商",colorName:"顏色名稱",hex:"十六進位",materialOptional:"材料（可選）",showing:"顯示 {{filtered}} / {{total}} 種顏色",noMatch:"沒有顏色匹配您的搜尋",empty:"目錄中沒有顏色",deleteColor:"刪除顏色",deleteConfirm:'確定要刪除"{{name}}"嗎？',resetCatalog:"重設顏色目錄",resetConfirm:"重設目錄為預設值？這將移除所有自訂顏色。",sync:"同步",starting:"啟動中...",syncTooltip:"從 FilamentColors.xyz 同步（2000+ 種顏色，可能需要一分鐘）",loadFailed:"載入顏色目錄失敗",fieldsRequired:"製造商、顏色名稱和十六進位顏色為必填項",colorAdded:"顏色已新增",addFailed:"新增顏色失敗",colorUpdated:"顏色已更新",updateFailed:"更新顏色失敗",colorDeleted:"顏色已刪除",deleteFailed:"刪除顏色失敗",resetSuccess:"顏色目錄已重設為預設值",resetFailed:"重設目錄失敗",syncUpToDate:"已是最新（檢查了 {{count}} 種顏色）",syncComplete:"新增了 {{added}} 種新顏色（{{skipped}} 種已存在）",syncError:"同步錯誤",syncFailed:"從 FilamentColors.xyz 同步失敗",exported:"已匯出 {{count}} 種顏色",imported:"已匯入 {{added}} 種顏色（跳過 {{skipped}} 種）",importFailed:"匯入失敗：無效的 JSON 格式",selectedCount:"已選擇 {{count}} 項",deleteSelected:"刪除所選",bulkDeleteConfirm:"確定要刪除 {{count}} 種顏色嗎？",bulkDeleted:"已刪除 {{count}} 種顏色",bulkDeleteFailed:"刪除顏色失敗"},dateFormat:"日期格式",dateFormatUs:"美式 (MM/DD/YYYY)",dateFormatEu:"歐式 (DD/MM/YYYY)",dateFormatIso:"ISO (YYYY-MM-DD)",timeFormat:"時間格式",timeFormat12:"12小時制 (3:30 PM)",timeFormat24:"24小時制 (15:30)",defaultPrinter:"預設印表機",defaultPrinterDescription:"為上傳、重印和其他操作預選此印表機。",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"拖曳側邊欄項目以重新排序。在此處重設為預設順序。",setDefault:"設為預設",sidebarOrderSetDefaultHint:"設為預設將目前選單順序套用於尚未自訂的使用者。",sidebarDefaultSet:"已設定預設選單順序。",sidebarDefaultCleared:"已清除預設選單順序。",sidebarDefaultFailed:"設定預設選單順序失敗。",reset:"重設",darkMode:"深色模式",lightMode:"淺色模式",active:"(目前)",background:"背景",accent:"強調色",style:"樣式",bgNeutral:"中性",bgWarm:"暖色",bgCool:"冷色",bgOled:"OLED 純黑",bgSlate:"石板藍",bgForest:"森林綠",accentGreen:"綠色",accentTeal:"青色",accentBlue:"藍色",accentOrange:"橙色",accentPurple:"紫色",accentRed:"紅色",styleClassic:"經典",styleGlow:"發光",styleVibrant:"鮮豔",themeToggleHint:"使用側邊欄中的圖示在深色、淺色和系統模式之間切換。",autoArchivePrints:"自動歸檔列印",autoArchiveDescription:"列印完成時自動儲存3MF檔案",saveThumbnailsDescription:"從3MF檔案中提取並儲存預覽影像",captureFinishPhotoDescription:"列印完成時從印表機攝影機拍照",ffmpegNotInstalled:"未安裝ffmpeg",ffmpegRequired:"攝影機捕獲需要ffmpeg。透過 <brew>brew install ffmpeg</brew>（macOS）或 <apt>apt install ffmpeg</apt>（Linux）安裝。",camera:"攝影機",cameraViewMode:"攝影機檢視模式",cameraOverlayDescription:"攝影機在主螢幕上以可調大小的覆蓋層開啟",cameraWindowDescription:"攝影機在單獨的瀏覽器視窗中開啟",externalCamerasDescription:"設定外部攝影機以替換內建印表機攝影機。支援MJPEG流、RTSP、HTTP快照和USB攝影機（V4L2）。啟用後，外部攝影機將用於即時檢視和完成照片。",cameraPlaceholderUsb:"裝置路徑 (/dev/video0)",cameraPlaceholderUrl:"攝影機URL (rtsp://... 或 http://...)",cameraTypeMjpeg:"MJPEG 流",cameraTypeRtsp:"RTSP 流",cameraTypeSnapshot:"HTTP 快照",cameraTypeUsb:"USB 攝影機 (V4L2)",cameraSnapshotUrl:"快照 URL（選用）",cameraSnapshotUrlPlaceholder:"http://192.168.1.61:1984/api/frame.jpeg?src=printer",cameraSnapshotUrlHelp:"用於通知縮圖、完成照片、層縮時攝影影格和列印板偵測的單一影格 URL。縮時攝影和列印板偵測各自需要自己的每印表機切換 — 此 URL 只是它們啟用時拉取的影像來源。留空以從上方即時串流擷取。適用於 go2rtc（/api/frame.jpeg）和具有專用快照端點的 IP 攝影機。",cameraRotation:"旋轉",test:"測試",connected:"已連線",disconnected:"未連線",currency:"貨幣",defaultFilamentCost:"預設耗材成本（每公斤）",electricityCost:"每千瓦時電費",energyDisplayMode:"能源顯示模式",energyModePrintDescription:"儀表板顯示列印期間使用的能源總和",energyModeTotalDescription:"儀表板顯示智慧插座的累計能源",fileManager:"檔案管理器",createArchiveEntry:"列印時建立歸檔條目",createArchiveEntryDescription:"從檔案管理器列印時，可選擇建立歸檔條目",lowDiskSpaceWarning:"磁碟空間不足警告",lowDiskSpaceDescription:"當可用磁碟空間低於此閾值時顯示警告",printerFirmware:"印表機韌體",checkFirmwareDescription:"檢查Bambu Lab的印表機韌體更新",bambuddySoftware:"Bambuddy 軟體",autoCheckDescription:"啟動時自動檢查新版本",checkNow:"立即檢查",updateAvailableVersion:"可用更新：v{{version}}",releaseNotes:"發布說明",updateViaDocker:"透過 Docker Compose 更新：",updateViaHomeAssistant:"更新由 Home Assistant Supervisor 管理。請在 Home Assistant 中開啟 設定 → 附加元件 → Bambuddy 以安裝新版本。",installUpdate:"安裝更新",latestVersionRunning:"您正在執行最新版本",failedToCheckUpdates:"檢查更新失敗：{{error}}",backupRestore:"備份與恢復",backupRestoreDescription:"匯出/匯入設定並設定GitHub 備份",goToBackup:"前往備份",externalUrl:"外部URL",externalUrlDescription:"Bambuddy可存取的外部URL。用於通知影像和外部整合。",bambuddyUrl:"Bambuddy URL",externalUrlHint:"包含協定和連接埠（例如：http://192.168.1.100:8000）",ftpRetry:"FTP重試",ftpRetryDescription:"當印表機Wi-Fi 不穩定時重試FTP操作。適用於3MF下載、列印上傳、縮時攝影下載和韌體更新。",autoRetryDescription:"自動重試失敗的FTP操作",retryAttempts:"重試次數",retryDelay:"重試延遲",connectionTimeout:"連線超時",time_one:"{{count}} 次",time_other:"{{count}} 次",second_one:"{{count}} 秒",second_other:"{{count}} 秒",nSeconds:"{{count}} 秒",increaseForWeakWifi:"對Wi-Fi 訊號弱的印表機增加此值",homeAssistant:"Home Assistant",homeAssistantFullDescription:"連線到Home Assistant，透過HA REST API控制智慧插座。支援switch、light、input_boolean和script實體。",homeAssistantUrl:"Home Assistant URL",longLivedAccessToken:"長期存取權杖",haTokenHint:"在HA中建立權杖：個人資料 → 長期存取權杖 → 建立權杖",connectionSuccessful:"連線成功",connectionFailed:"連線失敗",haConnectionSuccess:"已成功連線到Home Assistant。",haConnectionFailed:"連線Home Assistant失敗。",mqttPublishing:"MQTT發布",mqttDescription:"將BamBuddy事件發布到外部MQTT代理，用於與Node-RED、Home Assistant和其他自動化系統整合。",mqttEnableDescription:"向外部MQTT代理發布事件",brokerHostname:"代理主機名稱",port:"連接埠",usernameOptional:"使用者名稱（可選）",passwordOptional:"密碼（可選）",topicPrefix:"主題前綴",topicPrefixHint:"主題格式：{{prefix}}/printers/<serial>/status 等",prometheusMetrics:"Prometheus 指標",prometheusEndpointDescription:"在 <code>/api/v1/metrics</code> 公開印表機指標，用於Prometheus/Grafana監控。",bearerTokenOptional:"Bearer權杖（可選）",bearerTokenHint:"設定後，請求必須包含 <code>Authorization: Bearer <token></code>",metricsConnectionStatus:"連線狀態",metricsPrinterState:"印表機狀態（空閒/列印中等）",metricsPrintProgress:"列印進度 0-100%",metricsBedTemp:"熱床溫度",metricsNozzleTemp:"噴嘴溫度",metricsPrintsTotal:"按結果分類的總列印數",metricsMore:"...以及更多（層數、風扇、佇列、耗材用量）",smartPlugsDescription:"連線智慧插座（Tasmota或Home Assistant）以自動化電源控制並追蹤印表機的能源使用情況。",allOn:"全部開啟",allOff:"全部關閉",addSmartPlug:"新增智慧插座",energySummary:"能源概要",currentPower:"目前功率",plugsOnline:"{{reachable}}/{{total}} 個插座線上",today:"今天",yesterday:"昨天",total:"總計",enablePlugsForSummary:"啟用插座以檢視能源概要",addNotificationProvider:"新增",systemBadge:"(系統)",creating:"建立中...",changing:"修改中...",deleteUserAndItems:"刪除使用者及其所有項目",deleteUserKeepItems:"刪除使用者，保留項目（將變為無主項目）",ok:"確定",twoFa:{totpTitle:"身份驗證器 App (TOTP)",totpDesc:"使用 Google Authenticator、Aegis 或 Authy 等 App。",emailOtpTitle:"郵件 OTP",emailOtpDesc:"登入時向 {{email}} 傳送一次性驗證碼。",emailOtpNoEmail:"請先為帳戶新增信箱地址以啟用此方式。",addEmailFirst:"您的帳戶沒有信箱地址，請聯絡管理員新增。",setupTotp:"設定身份驗證器 App",setupAuthApp:"設定身份驗證器 App",setupInstructions:"使用身份驗證器 App 掃描QR Code，然後輸入驗證碼確認。",manualEntry:"無法掃描？請手動輸入此金鑰：",scannedContinue:"已掃描 — 繼續",enterCodeToConfirm:"請輸入身份驗證器 App 中的6位驗證碼以確認設定。",activate:"啟用",disableTotp:"停用身份驗證器",disableConfirmHint:"請輸入有效的 TOTP 碼或備用碼來停用身份驗證器。",totpDisabled:"身份驗證器 App 已停用。",emailOtpEnabled:"郵件 OTP 已啟用。",emailOtpDisabled:"郵件 OTP 已停用。",smtpRequired:"請先設定並測試SMTP設定。",invalidCode:"無效驗證碼，請重試。",enableEmailOtp:"啟用郵件 OTP",disableEmailOtp:"停用郵件 OTP",emailSetupEnterCode:"驗證碼已傳送至您的信箱地址。請在下方輸入以確認您擁有此信箱。",verifyAndEnable:"驗證並啟用",emailDisablePasswordHint:"請輸入您的帳戶密碼以確認停用郵件 OTP。",passwordPlaceholder:"輸入您的密碼",backupCodesTitle:"儲存備用碼",backupCodesWarning:"請將這些碼儲存在安全的地方。每個碼只能使用一次，且不會再次顯示。",backupCodesRemaining:"剩餘 {{count}} 個備用碼",savedCodes:"已儲存",regenBackup:"重新產生備用碼",regenBackupHint:"輸入目前 TOTP 碼以產生 10 個新備用碼，所有現有備用碼將失效。",newBackupCodes:"新備用碼",linkedAccounts:"已連結的 SSO 帳戶",linkedAccountsDesc:"以下外部身份提供者已與您的帳戶連結。",oidcUnlinked:"帳戶已解除連結。"},oidc:{title:"SSO / OIDC 提供者",desc:"設定 OpenID Connect 提供者以實現單點登入。",addProvider:"新增提供者",newProvider:"新提供者",empty:"尚未設定 OIDC 提供者。",created:"提供者已建立。",updated:"提供者已更新。",deleted:"提供者已刪除。",refreshIcon:"重新整理圖示",removeIcon:"移除圖示",iconRefreshed:"圖示已重新整理。",iconRemoved:"圖示已移除。",iconFetchFailed:"無法從提供者 URL 取得圖示。",deleteTitle:"刪除提供者",deleteMessage:'刪除"{{name}}"？所有連結帳戶將斷開連線。',form:{name:"顯示名稱",issuerUrl:"頒發者 URL",clientId:"客戶端 ID",clientSecret:"客戶端金鑰",scopes:"作用域",iconUrl:"圖示 URL（可選）",enabled:"已啟用",autoCreate:"自動建立使用者",autoCreateDesc:"首次登入時自動建立本機帳戶。",autoLink:"自動連結已有帳戶",autoLinkDesc:"首次登入時透過信箱匹配現有本機帳戶並自動連結。",emailClaim:"電子郵件聲明",emailClaimDesc:"用作電子郵件身份的 JWT 聲明。Azure Entra ID 請使用 'preferred_username' 或 'upn'（不發送 email_verified）。僅使用可信的聲明名稱。",emailClaimPlaceholder:"電子郵件",emailClaimCustomClaimAutoLinkWarning:"自訂宣告僅在值由租用戶管理時（例如 Azure Entra ID 的 upn / preferred_username）對自動關聯安全。如果您的 IdP 允許使用者自我宣告此宣告，請勿啟用自動關聯。",requireEmailVerified:"要求電子郵件已驗證",requireEmailVerifiedDesc:"僅在提供商將電子郵件聲明標記為已驗證時才接受。",requireEmailVerifiedWarning:"警告：將在未經驗證的情況下接受電子郵件。僅對受信任的提供商使用。",requireEmailVerifiedAutoLink:"請先停用自動連結以變更此設定。",secretHint:"留空以保留目前",secretPlaceholder:"新金鑰",defaultGroup:"預設群組",defaultGroupDesc:"自動建立使用者時分配的群組。未設定時回退到 Viewers。",defaultGroupViewersFallback:"Viewers（預設）"}},encryption:{title:"MFA 加密狀態",enabledFromEnv:"已啟用靜態加密（金鑰來自 MFA_ENCRYPTION_KEY 環境變數）",enabledFromFile:"已啟用靜態加密（金鑰從資料目錄載入）",enabledGenerated:"使用自動產生的金鑰啟用靜態加密",notConfigured:"未設定靜態加密",notConfiguredDesc:"TOTP 機密和 OIDC client_secrets 以明文儲存。請設定 MFA_ENCRYPTION_KEY 或使用可寫資料目錄重新啟動 Bambuddy 以自動產生。",allEncrypted:"所有 MFA 機密皆已靜態加密。",legacyRowsLabel:"舊版明文列",encryptedRowsLabel:"已加密列",legacyRowsWarning:"偵測到 {{count}} 個舊版明文列。請重新儲存 OIDC 供應商或重新註冊使用者的身份驗證器應用程式，以遷移到加密儲存。",backupHint:"自動產生的金鑰儲存在 DATA_DIR/.mfa_encryption_key 中，並包含在本機備份 ZIP 中。請保護備份安全或顯式設定 MFA_ENCRYPTION_KEY。",decryptionBrokenTitle:"加密金鑰遺失",decryptionBrokenError:"無法解密 {{count}} 條加密記錄，因為加密金鑰不再可用。請還原先前的 MFA_ENCRYPTION_KEY 或 DATA_DIR/.mfa_encryption_key 以恢復存取。",migrationErrorWarning:"{{count}} 行舊資料在啟動時未能重新加密。請檢查伺服器日誌並重新啟動 Bambuddy 以重試。"}},notification:{printStarted:{title:"列印已開始",body:"{{printer}}：{{filename}} 已開始列印"},printCompleted:{title:"列印已完成",body:"{{printer}}：{{filename}} 已成功完成"},printFailed:{title:"列印失敗",body:"{{printer}}：{{filename}} 列印失敗"},printStopped:{title:"列印已停止",body:"{{printer}}：{{filename}} 已停止"},printProgress:{title:"列印進度",body:"{{printer}}：{{filename}} 已完成 {{percent}}%"},printerOffline:{title:"印表機離線",body:"{{printer}} 已離線"},printerError:{title:"印表機錯誤",body:"{{printer}}：{{error}}"},filamentLow:{title:"耗材不足",body:"{{printer}}：耗材即將用完"},maintenanceDue:{title:"維護到期",body:"{{printer}}：{{items}} 需要關注"}},errors:{generic:"出了點問題",networkError:"網路錯誤。請檢查您的連線。",notFound:"未找到",unauthorized:"未授權",serverError:"伺服器錯誤",validationError:"請檢查您的輸入",printerConnectionFailed:"連線印表機失敗",saveFailed:"儲存更改失敗",deleteFailed:"刪除失敗",loadFailed:"載入資料失敗"},hmsErrors:{title:"錯誤 - {{name}}",noErrors:"無錯誤",viewOnWiki:"在拓竹 Wiki 上檢視",clearInstructions:"在印表機上清除錯誤以在此處消除它們。",clearErrors:"清除錯誤",clearSuccess:"HMS 錯誤已清除",clearFailed:"清除 HMS 錯誤失敗"},mqttDebug:{title:"MQTT 偵錯日誌",searchPlaceholder:"搜尋主題或負載...",noMessages:"尚未紀錄訊息",startLoggingHint:'點選"開始紀錄"以開始捕獲 MQTT 訊息',noMessagesMatch:"沒有訊息匹配您的篩選條件",adjustFilterHint:"嘗試調整您的搜尋或篩選條件",incoming:"傳入",outgoing:"傳出",loggingStopped:"紀錄已停止",loggingActive:"紀錄中 - 訊息將自動重新整理",startLogging:"開始紀錄",stopLogging:"停止紀錄",clearLog:"清除日誌",topic:"主題",timestamp:"時間戳",direction:"方向",all:"全部"},printerFiles:{title:"檔案管理器",storageUsed:"已用：",storageFree:"剩餘：",filterPlaceholder:"篩選檔案...",deleteButton:"刪除",deleteFiles:"刪除 {{count}} 個檔案",deleteFileConfirm:'刪除"{{name}}"？此操作無法復原。',deleteFilesConfirm:"刪除 {{count}} 個選中的檔案？此操作無法復原。",noFiles:"印表機上沒有檔案",loadingFiles:"載入檔案中...",failedToLoad:"載入檔案失敗",toast:{filesDeleted:"已刪除 {{count}} 個檔案",deleteFailed:"刪除失敗：{{error}}"}},confirm:{delete:"確定要刪除嗎？",unsavedChanges:"您有未儲存的更改。確定要離開嗎？",clearQueue:"確定要清空佇列嗎？"},login:{title:"Bambuddy 登入",subtitle:"登入您的帳戶",username:"使用者名稱",usernamePlaceholder:"輸入您的使用者名稱",usernameOrEmail:"使用者名稱或信箱",usernameOrEmailPlaceholder:"使用者名稱或 @ 信箱",password:"密碼",passwordPlaceholder:"輸入您的密碼",signIn:"登入",signingIn:"登入中...",rememberMe:"記住我",forgotPassword:"忘記密碼？",loginSuccess:"登入成功",loginFailed:"登入失敗",enterCredentials:"請輸入使用者名稱和密碼",enterEmail:"請輸入您的電子郵件地址",oidcLoginFailed:"OIDC 登入失敗",oidcErrors:{providerError:"身份提供者返回了一個錯誤",missingParameters:"OIDC 回呼缺少必要引數",invalidState:"OIDC 狀態無效或已被使用",stateExpired:"OIDC 登入會話已過期，請重試",providerNotFound:"未找到 OIDC 提供者",discoveryFailed:"無法獲取 OIDC 探索文件",invalidDiscovery:"OIDC 探索文件無效",networkError:"OIDC 權杖交換時出現網路錯誤",badResponse:"OIDC 權杖交換時收到意外回應",noIdToken:"OIDC 提供者未返回 ID 權杖",validationFailed:"OIDC 權杖驗證失敗",nonceMismatch:"OIDC nonce 不符，可能存在重放攻擊",missingSubClaim:"OIDC 權杖缺少 sub 宣告",noLinkedAccount:"沒有與此 OIDC 身份連結的本機帳戶",accountInactive:"您的帳戶已被停用",userResolutionFailed:"無法解析您的帳戶",internalError:"OIDC 登入過程中發生內部錯誤",tokenExchangeFailed:"OIDC 權杖交換失敗"},forgotPasswordTitle:"忘記密碼",forgotPasswordMessage:"如果您忘記了密碼，請聯絡系統管理員進行重設。",forgotPasswordEmailMessage:"輸入您的信箱地址，我們將向您傳送新密碼。",emailAddress:"信箱地址",emailPlaceholder:"your.email@example.com",cancel:"取消",sending:"傳送中...",sendResetEmail:"傳送重設郵件",howToReset:"如何重設密碼：",resetStep1:"聯絡您的 Bambuddy 管理員",resetStep2:"請他們在使用者管理中重設您的密碼",resetStep3:"他們可以為您設定一個臨時密碼",resetStep4:"使用新密碼登入並在設定中修改密碼",gotIt:"知道了",resetPassword:{title:"設定新密碼",subtitle:"請在下方輸入並確認您的新密碼。",newPassword:"新密碼",newPasswordPlaceholder:"至少 8 個字元",confirmPassword:"確認密碼",confirmPasswordPlaceholder:"重複輸入新密碼",saving:"儲存中…",submit:"設定新密碼",backToLogin:"回到登入",passwordsDoNotMatch:"密碼不符",passwordTooShort:"密碼至少需要 8 個字元",resetFailed:"密碼重設失敗。連結可能已過期。"},twoFA:{title:"兩步驗證",subtitle:"您的帳戶已啟用兩步驗證。請在下方輸入驗證碼。",methodAuthenticator:"身份驗證器 App",methodEmail:"信箱驗證碼",methodBackup:"備用恢復碼",instructionsTotp:"請開啟您的身份驗證器 App，輸入 Bambuddy 的 6 位驗證碼。",instructionsEmail:"6 位驗證碼已傳送至您的信箱，有效期為 10 分鐘。",instructionsEmailNotSent:"點選下方按鈕，透過郵件獲取驗證碼。",instructionsBackup:"請輸入您的一個 8 位備用恢復碼。每個恢復碼只能使用一次。",sendCodeButton:"傳送信箱驗證碼",sendingCode:"傳送中...",resendCode:"重新傳送驗證碼",codeLabel:"驗證碼",backupCodeLabel:"備用恢復碼",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"驗證",verifyingButton:"驗證中...",backToLogin:"← 回到登入頁面",orContinueWith:"或透過以下方式登入",signInWith:"使用 {{provider}} 登入",enterCode:"請輸入驗證碼",sendCodeFailed:"驗證碼傳送失敗",invalidCode:"無效驗證碼，請重試。"}},setup:{title:"Bambuddy 設定",subtitle:"為您的 Bambuddy 實例設定身份驗證",enableAuth:"啟用身份驗證",adminAccount:"管理員帳戶",adminAccountDesc:"如果管理員使用者已存在，將使用現有管理員帳戶啟用身份驗證。如需使用現有管理員，請將下方欄位留空，或輸入新憑據建立新管理員使用者。",adminUsername:"管理員使用者名稱",adminPassword:"管理員密碼",optionalIfAdminExists:"（如管理員使用者已存在則為可選）",adminUsernamePlaceholder:"輸入管理員使用者名稱（可選）",adminPasswordPlaceholder:"輸入管理員密碼（可選）",confirmPassword:"確認密碼",confirmPasswordPlaceholder:"確認管理員密碼",settingUp:"設定中...",completeSetup:"完成設定",toast:{authEnabledAdminCreated:"身份驗證已啟用並建立了管理員使用者",authEnabledExistingAdmins:"使用現有管理員使用者啟用了身份驗證",setupCompleted:"設定完成",enterBothCredentials:"請輸入管理員使用者名稱和密碼，或將兩者留空以使用現有管理員使用者",passwordsDoNotMatch:"密碼不符",passwordTooShort:"密碼至少需要 6 個字元"}},changePassword:{title:"修改密碼",currentPassword:"目前密碼",currentPasswordPlaceholder:"輸入目前密碼",newPassword:"新密碼",newPasswordPlaceholder:"輸入新密碼（至少 6 個字元）",confirmPassword:"確認新密碼",confirmPasswordPlaceholder:"確認新密碼",passwordsDoNotMatch:"密碼不符",passwordTooShort:"密碼至少需要 6 個字元",changing:"修改中...",success:"密碼修改成功",failed:"密碼修改失敗"},plateAlert:{title:"列印已暫停！",message:"在列印板上偵測到物體。列印已自動暫停。請清理列印板並繼續列印。",understand:"我知道了"},camera:{title:"攝影機檢視",invalidPrinterId:"無效的印表機 ID",live:"即時",snapshot:"快照",restartStream:"重新啟動流",refreshSnapshot:"重新整理快照",fullscreen:"全螢幕",exitFullscreen:"離開全螢幕",connectingToCamera:"連線攝影機中...",capturingSnapshot:"拍攝快照中...",connectionLost:"連線已斷開",connectionFailed:"攝影機連線失敗",reconnecting:"{{countdown}} 秒後重新連線...（第 {{attempt}}/{{max}} 次嘗試）",reconnectNow:"立即重新連線",cameraUnavailable:"攝影機不可用",cameraUnavailableDesc:"請確保印表機已通電並已連線。",noCamera:"無可用攝影機",retry:"重試",cameraStream:"攝影機流",zoomOut:"縮小",zoomIn:"放大",resetZoom:"重設縮放",recording:"錄製中",startRecording:"開始錄製",stopRecording:"停止錄製",chamberLight:"切換腔室燈",unavailable:"攝影機無法使用",diagnose:{button:"診斷",modalTitle:"攝影機診斷",running:"正在執行診斷...",runFailed:"無法執行診斷: {{error}}",retry:"重新執行",stage:{tcp_reachable:"網路可達性",first_frame:"畫面擷取",live_stream_active:"直播串流進行中"},summary:{all_ok:"攝影機運作正常。診斷已成功完成所有階段。",live_stream_active_healthy:"攝影機正在傳輸最新畫面 — 無需測試。",printer_unreachable:"無法存取印表機。請檢查 IP 位址、網路連線以及印表機是否已開機。",camera_port_closed:"印表機可存取，但攝影機連接埠已關閉。請確認印表機設定中已啟用僅 LAN 模式與開發者模式。",no_frame:"已連線到攝影機，但未收到畫面。請重試或檢查印表機設定中攝影機是否已啟用。",unknown_failure:"攝影機診斷因不明原因失敗。請查看支援日誌了解詳情。"},meta:{protocol:"協定",port:"連接埠",profile:"設定檔"}}},groups:{title:"群組管理",subtitle:"管理存取控制的權限群組",backToSettings:"返回設定",createGroup:"建立群組",noPermission:"您沒有存取此頁面的權限。",system:"系統",noDescription:"無描述",usersCount:"{{count}} 個使用者",permissionsCount:"{{count}} 個權限",edit:"編輯",delete:"刪除",toast:{created:"群組建立成功",updated:"群組更新成功",deleted:"群組刪除成功",enterGroupName:"請輸入群組名稱"},modal:{editGroup:"編輯群組",createGroup:"建立群組",cancel:"取消",saving:"儲存中...",creating:"建立中...",saveChanges:"儲存更改"},form:{groupName:"群組名稱",groupNamePlaceholder:"輸入群組名稱",systemGroupWarning:"系統群組名稱不可更改",description:"描述",descriptionPlaceholder:"輸入描述（可選）",permissions:"權限（已選 {{count}} 個）"},deleteModal:{title:"刪除群組",message:"確定要刪除此群組嗎？此群組中的使用者將失去這些權限。",confirm:"刪除群組"},editor:{title:"編輯群組",createTitle:"建立群組",search:"搜尋權限...",selectAll:"全選",clearAll:"清除全部",permissionsSelected:"已選 {{count}} 個",noResults:"沒有權限匹配您的搜尋"}},users:{title:"使用者管理",subtitle:"管理使用者及其對 Bambuddy 實例的存取",backToSettings:"返回設定",createUser:"建立使用者",noPermission:"您沒有存取此頁面的權限。",admin:"管理員",noGroups:"無群組",active:"活躍",inactive:"非活躍",edit:"編輯",delete:"刪除",system:"系統",noGroupsAvailable:"無可用群組",table:{username:"使用者名稱",groups:"群組",status:"狀態",actions:"操作"},toast:{created:"使用者建立成功",updated:"使用者更新成功",deleted:"使用者刪除成功",fillRequired:"請填寫所有必填欄位",passwordsDoNotMatch:"密碼不符",passwordTooShort:"密碼至少需要 6 個字元",ldapProvisioned:"已建立 LDAP 使用者「{{username}}」"},modal:{createUser:"建立使用者",editUser:"編輯使用者",cancel:"取消",creating:"建立中...",saving:"儲存中...",saveChanges:"儲存更改",advancedAuthSubtitle:"使用進階認證",tabsAriaLabel:"使用者來源",localTab:"本機",ldapTab:"LDAP",ldapSearchLabel:"搜尋目錄",ldapSearchPlaceholder:"輸入使用者名稱、姓名或電子郵件...",ldapMinChars:"輸入至少 2 個字元以搜尋",ldapTypeToSearch:"開始輸入以搜尋 LDAP 目錄",ldapSearching:"搜尋目錄中...",ldapNoResults:"目錄中沒有符合的使用者",ldapSearchError:"目錄搜尋失敗。請檢查 LDAP 伺服器狀態。",ldapAlreadyProvisioned:"已建立",ldapSelectedLabel:"已選",ldapProvision:"建立使用者",ldapProvisioning:"建立中...",ldapErrorProvision:"建立失敗。請檢查 LDAP 伺服器狀態後重試。"},form:{username:"使用者名稱",usernamePlaceholder:"輸入使用者名稱",email:"信箱",emailPlaceholder:"user@example.com",password:"密碼",passwordPlaceholder:"輸入密碼",confirmPassword:"確認密碼",confirmPasswordPlaceholder:"確認密碼",newPasswordPlaceholder:"輸入新密碼",confirmNewPasswordPlaceholder:"確認新密碼",leaveBlankToKeep:"留空以保持目前值",groups:"群組",optional:"可選",autoGeneratedPassword:"將自動產生安全密碼並透過郵件傳送給使用者。",passwordManagedByAdvancedAuth:'密碼由進階認證管理。使用"重設密碼"透過郵件向使用者傳送新密碼。',resetPassword:"重設密碼",resettingPassword:"重設密碼中..."},deleteModal:{title:"刪除使用者",message:"確定要刪除此使用者嗎？此操作無法復原。",confirm:"刪除使用者"}},streamOverlay:{title:"流疊加層",invalidPrinterId:"無效的印表機 ID",cameraStream:"攝影機流",progress:"進度",eta:"預計完成時間",printerIdle:"印表機空閒",printerOffline:"印表機離線",status:{printing:"列印中",paused:"已暫停",finished:"已完成",failed:"失敗",idle:"空閒",unknown:"未知"}},profiles:{title:"設定檔案",subtitle:"管理您的切片預設和壓力推進校準",tabs:{bambuCloud:"Bambu Cloud",orcaCloud:"Orca Cloud",local:"本機設定檔案",kprofiles:"K 值設定"},orcaCloud:{connectedAs:"已連接",logout:"中斷連線",noLogoutPermission:"您沒有中斷連線的權限",noConnectPermission:"您沒有連接到 Orca Cloud 的權限",retry:"重試",back:"使用其他登入方式",connect:{title:"連接到 Orca Cloud",description:"登入您的 Orca Cloud 帳號,將切片機設定檔同步到 Bambuddy。"},providers:{google:"使用 Google 登入",apple:"使用 Apple 登入",github:"使用 GitHub 登入",email:"使用電子郵件和密碼登入"},password:{title:"使用電子郵件和密碼登入",email:"電子郵件",emailPlaceholder:"you@example.com",password:"密碼",submit:"登入"},paste:{title:"完成登入",step1:"已在新分頁中開啟 Orca Cloud 登入頁面。請使用您的 Orca 帳號登入。",step2:'您的瀏覽器將被重新導向到一個 "localhost" URL,該 URL 無法載入。這是正常的 — 我們需要的就是這個 URL。',step3:"從瀏覽器的網址列複製整個 URL,貼到下方。",signInUrl:"若登入分頁未開啟,請點擊此 URL:",label:"在此貼上回呼 URL",placeholder:"http://localhost:41172/callback?code=...&state=...",submit:"完成連接"},profiles:{title:"您的 Orca Cloud 設定檔 ({{count}})",refresh:"重新整理",empty:"您的 Orca Cloud 帳號中尚無設定檔。"},toast:{connected:"已以 {{email}} 身分連接到 Orca Cloud",disconnected:"已從 Orca Cloud 中斷連線"},errors:{startFailed:"無法啟動 Orca Cloud 登入流程。",finishFailed:"無法完成 Orca Cloud 登入。",passwordFailed:"無法使用該電子郵件和密碼登入。",passwordEmpty:"請輸入電子郵件和密碼。",emptyPaste:"請從瀏覽器貼上回呼 URL。",noCode:"該 URL 不像 Orca Cloud 回呼 (缺少 code 參數)。請從網址列複製完整 URL。"}},localProfiles:{title:"本機設定檔案",subtitle:"從 OrcaSlicer 匯入和管理切片預設",import:"匯入設定檔案",importDesc:"將 .bbscfg、.bbsflmt、.orca_filament、.zip 或 .json 檔案拖放到此處",importing:"匯入中...",search:"搜尋本機預設...",noPresets:"尚無本機預設",noSearchResults:"沒有符合搜尋的預設",badge:"本機",edit:"編輯",delete:"刪除",cancel:"取消",deleteConfirmTitle:"刪除預設",deleteConfirm:"確定要刪除此預設嗎？此操作無法復原。",source:"來源",inheritsFrom:"繼承自",filamentType:"類型",vendor:"廠商",compatiblePrinters:"相容印表機",nozzleTemp:"噴嘴溫度",cost:"成本",density:"密度",pressureAdvance:"壓力推進",filament:"耗材",process:"工藝",printer:"印表機",toast:{importSuccess:"已匯入 {{count}} 個預設",importSkipped:"跳過 {{count}} 個預設（重複）",importError:"匯入時出現 {{count}} 個錯誤",deleted:"預設已刪除",updated:"預設已更新"}},connectedAs:"已連線為",logout:"登出",noLogoutPermission:"您沒有登出的權限",failedToLoad:"載入設定檔案失敗",retry:"重試",time:{justNow:"剛剛",minsAgo:"{{count}} 分鐘前",hoursAgo:"{{count}} 小時前",daysAgo:"{{count}} 天前"},toast:{loggedOut:"已登出"},login:{title:"連線到拓竹雲",subtitle:"跨裝置同步您的切片預設",email:"信箱",password:"密碼",region:"地區",regionGlobal:"全球",regionChina:"中國",verificationCode:"驗證碼",totpCode:"驗證器驗證碼",checkEmail:"檢查您的信箱 ({{email}}) 獲取 6 位驗證碼",enterTotpHint:"輸入驗證器 App 中的 6 位驗證碼",accessToken:"存取權杖",accessTokenHint:"貼上您的拓竹雲端存取權杖。中國大陸帳號（綁定手機號碼、無 Email 登入）僅能使用此方式登入。可從 MakerWorld 瀏覽器 Cookie 取得權杖，詳見 Wiki。",back:"返回",loginButton:"登入",verifyButton:"驗證",setTokenButton:"設定權杖",useToken:"改用存取權杖",useEmail:"改用信箱登入",toast:{loggedIn:"登入成功",codeSent:"驗證碼已傳送到您的信箱",enterTotp:"輸入驗證器 App 中的程式碼",tokenSet:"權杖設定成功"}},presets:{myPreset:"我的預設（可編輯）",duplicate:"複製",editable:"可編輯",failedToLoadDetails:"載入預設詳情失敗",deleteConfirm:"刪除此預設？",deleteWarning:'這將從拓竹雲中永久刪除"{{name}}"。此操作無法復原。',noDuplicatePermission:"您沒有複製預設的權限",noEditPermission:"您沒有編輯預設的權限",noDeletePermission:"您沒有刪除預設的權限",types:{filament:"耗材預設",printer:"印表機預設",process:"工藝預設"},toast:{deleted:"預設已刪除",created:"預設已建立",updated:"預設已更新",duplicated:"預設已複製",fieldAdded:'欄位"{{key}}"已新增',exported:"預設已匯出"},baseLabel:"基礎：{{name}}",currentLabel:"目前：{{name}}",newPreset:"新增預設",editPreset:"編輯預設",duplicatePreset:"複製預設",createNewPreset:"建立新預設",customizeSettings:"自訂新預設的設定",compareWithBase:"與基礎預設比較",compare:"比較",basePreset:"基礎預設",selectBasePreset:"選擇基礎預設...",presetName:"預設名稱",myCustomPreset:"我的自訂預設",inheritsFrom:"繼承自",dropJsonToImport:"拖放 JSON 以匯入",tabs:{common:"常用",allFields:"所有欄位"},availableFields:"可用欄位",searchFieldsPlaceholder:"搜尋欄位...",noMatchingFields:"沒有匹配的欄位",allFieldsAdded:"所有欄位已新增",addCustomField:"新增自訂欄位",yourOverrides:"您的覆蓋值",noOverridesYet:"尚無覆蓋值",clickFieldsToAdd:"點選左側的欄位進行新增",saveAsTemplate:"儲存為範本",jsonTip:"提示：將 .json 檔案拖放到此對話方塊的任意位置以匯入設定"},cloudView:{searchPlaceholder:"搜尋預設...",templates:"範本",refresh:"重新整理",newPreset:"新增預設",clearFilters:"清除篩選",compareMode:"比較模式",selectAnotherPreset:"選擇另一個 {{type}} 預設",clickTwoPresets:"點選兩個相同類型的預設進行比較",selectFirst:"1. 選擇第一個",selectSecond:"2. 選擇第二個",compareNow:"立即比較",lastSynced:"上次同步：",showingCount:"顯示 {{showing}} / {{total}} 個預設",noPresetsFound:"未找到預設",columns:{filament:"耗材",process:"工藝",printer:"印表機"},noFilamentPresets:"無耗材預設",noProcessPresets:"無工藝預設",noPrinterPresets:"無印表機預設",filters:{type:"類型",owner:"所有者",printer:"印表機",nozzle:"噴嘴",filament:"耗材",layer:"層",all:"全部",myPresets:"我的預設",builtIn:"內建",process:"工藝"},noTemplatesPermission:"您沒有管理範本的權限",noRefreshPermission:"您沒有重新整理設定檔案的權限",noCreatePermission:"您沒有建立預設的權限"},templates:{title:"快速範本",noTemplates:"尚無範本",createFirst:"從預設編輯器建立範本",typeFilter:"類型：",deleteTitle:"刪除範本",deleteWarning:"此操作無法復原",deleteConfirm:'確定要刪除"{{name}}"嗎？',namePlaceholder:"範本名稱",descriptionPlaceholder:"描述",settingsJson:"設定 (JSON)",fieldsCount:"{{count}} 個欄位",shownInModals:"在對話方塊中顯示",hiddenInModals:"在對話方塊中隱藏",apply:"套用",toast:{deleted:"範本已刪除",updated:"範本已更新",created:"範本已建立",applied:"範本已套用"}}},support:{debugLoggingActive:"偵錯日誌紀錄已啟用",manageLogs:"管理",collectItem7:"印表機連線和韌體版本",collectItem8:"整合狀態（Spoolman、MQTT、HA）",collectItem9:"網路介面（僅子網）",collectItem10:"Python 套件版本",collectItem11:"資料庫健康檢查",collectItem12:"Docker 環境詳情",bundleGenerating:"正在產生套件...",bundleStepConnection:"正在執行印表機連線檢查",bundleStepVirtualPrinters:"正在執行虛擬印表機設定檢查",bundleStepLogScan:"正在掃描最近的日誌以尋找已知問題",bundleStepBuild:"正在建立支援套件 ZIP 檔案"},fileManager:{title:"檔案管理器",subtitle:"組織和管理您的列印檔案",uploadFiles:"上傳檔案",newFolder:"新增資料夾",folderName:"資料夾名稱",folderNamePlaceholder:"例如：功能零件",renameFile:"重新命名檔案",renameFolder:"重新命名資料夾",invalidFilenameChar:'列印檔案名稱中不允許使用字元 "{{char}}"。印表機 SD 卡拒絕以下字元: < > : " / \\ | ? *',moveFiles:"移動 {{count}} 個檔案",rootNoFolder:"根目錄（無資料夾）",current:"目前",linkFolder:"連結資料夾",linkFolderDescription:'將"{{name}}"連結到專案或歸檔以便快速存取。',project:"專案",archive:"歸檔",noProjectsFound:"未找到專案",noArchivesFound:"未找到歸檔",unlink:"取消連結",link:"連結",dragDropFiles:"將檔案拖放到此處",dropFilesHere:"將檔案放在此處",orClickToBrowse:"或點選瀏覽",allFileTypesSupported:"支援所有檔案類型。ZIP 檔案將被解壓。",zipFilesDetected:"偵測到 ZIP 檔案",zipExtractOptions:"ZIP 檔案將被解壓。選擇如何處理資料夾結構：",preserveZipStructure:"保留 ZIP 中的資料夾結構",createFolderFromZip:"從 ZIP 檔名建立資料夾",stlThumbnailGeneration:"STL 縮圖產生",zipMayContainStl:"ZIP 檔案可能包含 STL 檔案。可以在解壓時產生縮圖。",thumbnailsCanBeGenerated:"可以為 STL 檔案產生縮圖。大型模型可能需要更長時間處理。",generateThumbnailsForStl:"為 STL 檔案產生縮圖",threemfDetected:"偵測到 3MF 檔案",threemfExtractionInfo:"將自動從 3MF 檔案中提取印表機型號、材料、顏色和列印設定。",willBeExtracted:"將被解壓",filesExtracted:"已解壓 {{count}} 個檔案",uploadComplete:"上傳完成：{{succeeded}} 個成功",uploadFailed:"上傳失敗",zipFilesFailed:"{{count}} 個檔案失敗",uploading:"上傳中...",changeLink:"更改連結...",linkTo:"連結到...",linkToProjectOrArchive:"連結到專案或歸檔",addToQueue:"新增到佇列",schedulePrint:"排程",generateThumbnail:"產生縮圖",generateThumbnails:"產生縮圖",generateThumbnailsForMissing:"為缺少縮圖的 STL 檔案產生縮圖",gridView:"網格檢視",listView:"列表檢視",lowDiskSpaceWarning:"磁碟空間不足警告",lowDiskSpaceDetails:"僅剩 {{free}}（總共 {{total}}）。閾值設定為 {{threshold}} GB。",files:"檔案",folders:"資料夾",size:"大小",free:"剩餘",allFiles:"所有檔案",allExternal:"外部",externalIsEmpty:"沒有外部檔案",externalEmptyDescription:"已連結的外部資料夾中的檔案將顯示於此。",wrap:"換行",enableTextWrapping:"啟用文字換行",disableTextWrapping:"停用文字換行",collapse:"折疊",collapseFoldersByDefault:"預設折疊資料夾",expandFoldersByDefault:"預設展開資料夾",dragToResizeTooltip:"拖曳調整大小，雙擊重設",searchFiles:"搜尋檔案...",allTypes:"所有類型",prints:"列印",ascending:"升序",descending:"降序",resultsCount:"{{showing}} / {{total}} 個檔案",selectAll:"全選",deselectAll:"取消全選",selected:"已選擇 {{count}} 個",adding:"新增中...",loadingFiles:"載入檔案中...",folderIsEmpty:"資料夾為空",noFilesYet:"尚無檔案",folderEmptyDescription:"上傳檔案或將檔案移入此資料夾以開始使用。",noFilesDescription:"上傳檔案以開始組織您的列印相關檔案。",noMatchingFiles:"沒有匹配的檔案",noMatchingFilesDescription:"沒有檔案匹配您目前的搜尋或篩選條件。",clearFilters:"清除篩選",printedCount:"已列印 {{count}} 次",uploadedBy:"上傳者",deleteFolder:"刪除資料夾",deleteFile:"刪除檔案",deleteFilesCount:"刪除 {{count}} 個檔案",deleteFolderConfirm:"確定要刪除此資料夾嗎？其中的所有檔案也將被刪除。",deleteFileConfirm:"確定要刪除此檔案嗎？",deleteFilesConfirm:"確定要刪除 {{count}} 個選中的檔案嗎？此操作無法復原。",deleting:"刪除中...",noPermissionRenameFolder:"您沒有重新命名資料夾的權限",noPermissionLinkFolder:"您沒有連結資料夾的權限",noPermissionDeleteFolder:"您沒有刪除資料夾的權限",noPermissionPrint:"您沒有列印的權限",noPermissionSlice:"您沒有切片檔案的權限",noPermissionAddToQueue:"您沒有新增到佇列的權限",noPermissionDownload:"您沒有下載檔案的權限",noPermissionRenameFile:"您沒有重新命名此檔案的權限",noPermissionGenerateThumbnail:"您沒有產生縮圖的權限",noPermissionDeleteFile:"您沒有刪除此檔案的權限",noPermissionCreateFolder:"您沒有建立資料夾的權限",noPermissionUpload:"您沒有上傳檔案的權限",noPermissionMoveFiles:"您沒有移動檔案的權限",noPermissionDeleteFiles:"您沒有刪除檔案的權限",linkExternal:"連結外部",linkExternalFolder:"連結外部資料夾",linkExternalFolderDescription:"將主機目錄（NAS、USB、網路共享）掛載到檔案管理器中。檔案不會被複制——直接從原始路徑存取。",externalFolderNamePlaceholder:"例如：NAS列印檔案",externalPath:"主機路徑",externalPathHelp:"Docker主機上目錄的絕對路徑。必須以繫結掛載方式掛載到容器中。",readOnly:"只讀",readOnlyHelp:"防止上傳和刪除",showHiddenFiles:"顯示隱藏檔案（點檔案）",externalFolder:"外部資料夾",scanFolder:"掃描",toast:{folderCreated:"資料夾已建立",folderDeleted:"資料夾已刪除",fileDeleted:"檔案已刪除",filesDeleted:"已刪除 {{count}} 個檔案",filesMoved:"檔案已移動",folderLinked:"資料夾已連結",folderUnlinked:"資料夾已取消連結",externalFolderLinked:"外部資料夾已連結並掃描",folderScanned:"掃描完成：新增 {{added}} 個，移除 {{removed}} 個",addedToQueue:"已將 {{count}} 個檔案新增到佇列",addedToQueuePartial:"已新增 {{added}} 個檔案，{{failed}} 個失敗",failedToAddToQueue:"新增檔案失敗：{{error}}",fileRenamed:"檔案已重新命名",folderRenamed:"資料夾已重新命名",thumbnailsGenerated:"已產生 {{count}} 個縮圖",thumbnailsGeneratedPartial:"已產生 {{succeeded}} 個縮圖，{{failed}} 個失敗",noStlMissingThumbnails:"沒有缺少縮圖的 STL 檔案",failedToGenerateThumbnails:"產生縮圖失敗：{{error}}",thumbnailGenerated:"縮圖已產生",failedToGenerateThumbnail:"產生縮圖失敗：{{error}}"}},projects:{title:"專案",subtitle:"組織和追蹤您的 3D 列印專案",newProject:"新增專案",editProject:"編輯專案",deleteProject:"刪除專案",projectName:"專案名稱",description:"描述",noProjects:"尚無專案",noProjectsFiltered:"沒有{{status}}專案",noProjectsFilteredHelp:"您沒有任何{{status}}專案。當專案狀態更改時，它們將出現在這裡。",createFirst:"建立您的第一個項目以開始組織相關列印、追蹤進度和管理構建。",createFirstButton:"建立您的第一個項目",create:"建立",files:"檔案",prints:"列印",plates:"板",parts:"零件",lastModified:"最後修改",deleteConfirm:"確定要刪除此項目嗎？歸檔和佇列項目將被取消連結但不會被刪除。",addFiles:"新增檔案",removeFile:"移除檔案",viewDetails:"檢視詳情",namePlaceholder:"例如：Voron 2.4 構建",urlLabel:"網址",urlPlaceholder:"https://makerworld.com/...",urlInvalid:"網址必須以 http:// 或 https:// 開頭",openExternalUrl:"開啟專案網址",coverImageLabel:"封面圖片",coverImageAlt:"專案封面圖片",coverImageUpload:"上傳",coverImageReplace:"替換",coverImageRemove:"移除",descriptionPlaceholder:"可選描述...",color:"顏色",targetPlates:"目標板數",targetPlatesPlaceholder:"例如：25",targetPlatesHelp:"列印任務數量",targetParts:"目標零件數",targetPartsPlaceholder:"例如：150",targetPartsHelp:"所需零件總數",tagsLabel:"標籤（逗號分隔）",tagsPlaceholder:"例如：voron、功能件、禮物",dueDate:"截止日期",priority:"優先順序",priorityLow:"低",priorityNormal:"普通",priorityHigh:"高",priorityUrgent:"緊急",statusActive:"進行中",statusCompleted:"已完成",statusArchived:"已歸檔",done:"完成",completed:"已完成",failed:"失敗",inQueue:"佇列中",noPrintsYet:"尚無列印",printJobs:"列印任務（板）",partsPrinted:"已列印零件",failedParts:"失敗零件",import:"匯入",export:"匯出",importProject:"匯入專案",exportAll:"匯出所有專案",loading:"載入專案中...",noEditPermission:"您沒有編輯專案的權限",noDeletePermission:"您沒有刪除專案的權限",noCreatePermission:"您沒有建立專案的權限",noImportPermission:"您沒有匯入專案的權限",noExportPermission:"您沒有匯出專案的權限",toast:{created:"專案已建立",updated:"專案已更新",deleted:"專案已刪除",imported:"專案已匯入",multipleImported:"已匯入 {{count}} 個項目",importFailed:"匯入失敗",exported:"專案已匯出（僅中繼資料）"}},projectDetail:{notFound:"未找到專案",backToProjects:"返回專案",export:"匯出",exportProject:"匯出專案",noExportPermission:"您沒有匯出專案的權限",noEditPermission:"您沒有編輯專案的權限",partOf:"屬於：",priorityLabel:"優先順序：",noPrints:"此項目尚無列印",status:{active:"進行中",completed:"已完成",archived:"已歸檔"},priority:{low:"低",normal:"普通",high:"高",urgent:"緊急"},dueDate:{overdue:"已逾期",today:"今天到期",daysLeft:"還有 {{count}} 天"},progress:{platesProgress:"板進度",partsProgress:"零件進度",printJobs:"列印任務",parts:"零件",percentComplete:"{{percent}}% 完成",remaining:"剩餘 {{count}} 個"},stats:{printJobs:"列印任務",total:"總計",failed:"{{count}} 個失敗",partsPrinted:"已列印 {{count}} 個零件",printTime:"列印時間",filamentUsed:"耗材用量"},cost:{title:"成本追蹤",filamentCost:"耗材成本",energy:"能源",totalCost:"總成本",total:"總計",includesBom:"含物料清單",budget:"預算",remaining:"剩餘"},subProjects:{title:"子專案 ({{count}})"},notes:{title:"備註",noEditPermission:"您沒有編輯備註的權限",placeholder:"新增關於此項目的備註...",empty:"尚無備註。點選編輯新增備註。"},files:{title:"檔案",linkFolders:"從檔案管理器連結資料夾",forQuickAccess:"到此項目以便快速存取。",fileCount:"{{count}} 個檔案",empty:"未連結資料夾。前往檔案管理器將資料夾連結到此項目。",noFiles:"此資料夾中沒有檔案。",print:"立即列印",addToQueue:"加入佇列"},bom:{title:"材料清單",acquired:"已獲取 {{completed}}/{{total}}",showAll:"顯示全部",hideDone:"隱藏已完成",addPart:"新增零件",noAddPermission:"您沒有新增零件的權限",partNamePlaceholder:"零件名稱（例如：M3x8 螺絲）",partName:"零件名稱",qty:"數量",price:"價格 ({{currency}})",sourcingUrlPlaceholder:"採購連結（可選）",remarksPlaceholder:"備註（可選）",deletePart:"刪除零件",deleteConfirm:'確定要刪除"{{name}}"嗎？',noUpdatePermission:"您沒有更新零件的權限",noEditPermission:"您沒有編輯零件的權限",noDeletePermission:"您沒有刪除零件的權限",totalCost:"總成本：",empty:"材料清單中沒有零件。新增硬體、電子元件或其他元件以追蹤需要採購的物品。"},timeline:{title:"活動時間線",empty:"尚無活動。"},template:{saveAsTemplate:"儲存為範本",noCreatePermission:"您沒有建立範本的權限"},queue:{title:"佇列",viewAll:"檢視全部",printing:"{{count}} 個列印中",queued:"{{count}} 個佇列中"},prints:{title:"列印 ({{count}})"},toast:{projectUpdated:"專案已更新",partAdded:"零件已新增",partRemoved:"零件已移除",exportFailed:"匯出失敗",projectExported:"專案已匯出",templateCreated:"範本已建立"}},system:{title:"系統資訊",version:"版本",uptime:"執行時間",cpuUsage:"CPU 使用率",memoryUsage:"記憶體使用率",diskUsage:"磁碟使用率",networkInfo:"網路資訊",logs:"日誌",debugMode:"偵錯模式",enableDebug:"啟用偵錯日誌",disableDebug:"停用偵錯日誌",downloadLogs:"下載日誌",clearLogs:"清除日誌",dockerInfo:"Docker 資訊",containerName:"容器名稱",imageName:"映象名稱",platform:"平臺",architecture:"架構"},library:{title:"耗材庫",addFilament:"新增耗材",editFilament:"編輯耗材",deleteFilament:"刪除耗材",vendor:"廠商",material:"材料",color:"顏色",kFactor:"K 值",temperature:"溫度",noFilaments:"耗材庫中沒有耗材",deleteConfirm:"確定要刪除此耗材嗎？",importFromPrinter:"從印表機匯入",exportToFile:"匯出到檔案"},slice:{title:"切片模型",action:"切片",actionAll:"切片全部 {{count}} 個盤面",actionAllTitle:"將所有盤面切片為單一的多盤面輸出（單一封存）。線材選擇涵蓋專案定義的每個槽位。",allPlatesToggle:"切片全部 {{count}} 個盤面",slicing:"切片中…",printer:"印表機設定檔",process:"製程設定檔",filament:"耗材設定檔",filamentSlot:"耗材 {{index}}（{{type}}）",selectPreset:"— 選擇預設 —",loadingPresets:"載入預設中…",analyzingPlateFilaments:"分析列印板耗材中…",analyzingPlateFilamentsHint:"正在執行預覽切片以發現此列印板使用的 AMS 插槽。之後會快取 — 重新開啟是即時的。",previewToast:"分析 {{name}} — {{elapsed}}",previewWithProgress:"分析 {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",notUsedByPlate:"— 此列印板未使用",noPresetsForSlot:"無可用預設",otherPrinters:"其他印表機",presetsLoadFailed:"載入預設失敗。請先開啟設定 → 設定檔以匯入。",refreshPresets:"重新整理",refreshPresetsTitle:"重新整理預設 — 擷取最新的雲端與打包設定清單（在 Bambu Studio 或 Bambu Handy 中刪除預設後使用）",allPresetsRequired:"必須選擇所有預設",bundle:"切片器套裝",bundleNone:"— 無（單獨選擇預設）—",bundleAllRequired:"必須選擇套裝的製程和每個耗材槽",enqueuing:"提交切片任務中…",queued:"已排隊…",failed:"切片失敗。請檢查切片器 sidecar 日誌。",startedToast:"在背景切片 {{name}}…",queuedToast:"已排隊：{{name}} — {{elapsed}}",runningToast:"切片 {{name}} — {{elapsed}}",runningWithProgress:"{{name}} – {{stage}} ({{percent}}%) – {{elapsed}}",runningWithProgressMultiPlate:"盤面 {{plateIndex}} / {{plateCount}} • {{name}} – {{stage}} ({{percent}}%) – {{elapsed}}",completedToast:"已切片 {{name}}",failedTitle:"切片失敗",failedToast:"切片 {{name}} 失敗：{{detail}}",tier:{local:"已匯入",cloud:"Bambu Cloud",orcaCloud:"Orca Cloud",standard:"標準"},cloud:{notAuthenticated:"登入 Bambu Cloud（設定 → 設定檔 → Bambu Cloud）以查看雲端預設。",expired:"Bambu Cloud 工作階段已過期 — 請重新登入以重新整理雲端預設。",unreachable:"目前無法存取 Bambu Cloud。本機和標準預設仍可使用。"},orcaCloud:{notAuthenticated:"登入 Orca Cloud（設定檔 → Orca Cloud）以查看您的 Orca 預設。",expired:"Orca Cloud 工作階段已過期 — 請重新登入以重新整理您的 Orca 預設。",unreachable:"Orca Cloud 目前無法存取。其他預設仍可正常使用。"},bedType:{label:"列印板",auto:"自動（使用製程預設）",coolPlate:"冷板",coolPlateSuperTack:"Cool Plate SuperTack",engineering:"Engineering Plate",highTemp:"High Temp Plate",texturedPEI:"Textured PEI Plate",smoothPEI:"Smooth PEI Plate"}},spoolman:{title:"Spoolman 整合",enabled:"Spoolman 已啟用",url:"Spoolman URL",connected:"已連線",disconnected:"未連線",testConnection:"測試連線",sync:"同步",syncing:"同步中...",lastSync:"上次同步",linkToSpoolman:"連結到 Spoolman",openInSpoolman:"在 Spoolman 中開啟",unlinkSpool:"取消連結耗材",unlinkConfirmTitle:"取消指派料盤？",unlinkConfirmMessage:"這將從此插槽中移除料盤。料盤本身的資料將保持不變。",selectSpool:"選擇耗材",noUnlinkedSpools:"無未指派的料盤",linkSuccess:"料盤指派成功",linkFailed:"料盤指派失敗",unlinkSuccess:"料盤取消指派成功",unlinkFailed:"料盤取消指派失敗",linkedSpool:"已指派料盤",spoolId:"耗材 ID",fillSourceLabel:"(Spoolman)",weight:"重量",remaining:"剩餘",disableWeightSync:"停用 AMS 估計重量同步",disableWeightSyncDesc:"不從 AMS 估計值更新剩餘容量。如果您更喜歡 Spoolman 的用量追蹤而非 AMS 百分比估計，請使用此選項。新耗材仍將使用 AMS 估計值作為初始重量。",reportPartialUsage:"報告失敗列印的部分用量",reportPartialUsageDesc:"當列印失敗或被取消時，根據層進度報告估計的耗材使用量。"},inventory:{title:"耗材庫存",subtitle:"管理您的料盤",spoolmanMixedContentTitle:"Spoolman 無法透過 HTTPS 載入 — 瀏覽器已封鎖混合內容",spoolmanMixedContentBody:"Bambuddy 透過您的反向代理以 HTTPS 提供服務，但您的 Spoolman 位址仍為 HTTP。基於安全考量，瀏覽器會封鎖混合內容，因此內嵌的 Spoolman 介面無法載入。Spoolman 也必須可透過 HTTPS 存取。",spoolmanMixedContentFixReverseProxy:"請將 Spoolman 置於與 Bambuddy 相同的反向代理（Traefik / Nginx / Caddy）之後並啟用 HTTPS，然後在設定中將 Spoolman URL 更新為新的 HTTPS 位址。",spoolmanMixedContentFixOpenNewTab:"作為替代方案，可在新分頁以 HTTP 開啟 Spoolman — 混合內容規則僅適用於內嵌框架，獨立分頁仍可正常運作。",spoolmanOpenInNewTab:"在新分頁開啟 Spoolman",labels:{title:"列印線材標籤",selectedCount:"已選 {{count}} 項",pickSpools:"選擇要列印標籤的線材：",searchPlaceholder:"按名稱、品牌或 #ID 搜尋",filterByMaterial:"材料：",allMaterials:"全部",selectVisible:"選擇所有可見 ({{count}})",deselectVisible:"取消選擇可見",clearAll:"全部清除",noSpoolsToShow:"沒有要顯示的線材。請調整篩選條件後重試。",noMatches:"沒有線材符合目前搜尋或篩選。",printOne:"列印此線材的標籤",printLabels:"列印標籤…",bulkTitle:"從目前顯示的 {{count}} 個線材中選擇要列印標籤的",noSpoolsTitle:"沒有要貼標籤的線材",error:"無法產生標籤：{{msg}}",sortBy:{label:"排序：",id:"按 ID",color:"按顏色"},templates:{amsHolderSmall:{label:"AMS 支架 — 小 (74 × 33 mm)",hint:"每頁一個標籤；對應 MakerWorld 模型 752566 (AMS 耗材標籤支架) 中可列印的標籤。"},amsHolderLarge:{label:"AMS 支架 — 大 (75 × 55 mm)",hint:"每頁一個標籤；對應 AMS 耗材標籤支架的紙卡插入款。空間足夠放置色塊、品牌、材質、ID 與 QR 碼。"},box40x30:{label:"盒標籤 (40 × 30 mm)",hint:"每頁一張；常見的 DK/Brother 捲尺寸,適合用於耗材袋與儲物盒標籤。"},box:{label:"Box label (62 × 29 mm)",hint:"每頁一個標籤；適配 Brother PT/QL 和 Dymo 小標籤。"},averyL7160:{label:"Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)",hint:"歐洲規格紙張；每張 A4 頁 21 個標籤。"},avery5160:{label:"Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)",hint:"美國規格紙張；每張 Letter 頁 30 個標籤。"}}},addSpool:"新增耗材",editSpool:"編輯耗材",copySpool:"複製耗材",material:"材料",selectMaterial:"選擇材料...",subtype:"子類型",brand:"品牌",searchBrand:"搜尋品牌...",useCustomBrand:'使用"{{brand}}"',useCustomMaterial:"使用自訂材料：{{material}}",colorName:"顏色名稱",colorNamePlaceholder:"翡翠白、烈焰紅...",color:"顏色",hexColor:"十六進位顏色",pickColor:"選擇自訂顏色",labelWeight:"標籤重量",coreWeight:"空盤重量",searchSpoolWeight:"搜尋耗材重量...",weightUsed:"已使用",currentWeight:"剩餘重量",measuredWeight:"稱量重量",spoolName:"料盤",costPerKg:"每公斤成本",storageLocation:"存放位置",storageLocationPlaceholder:"例如：貨架A，抽屜1",openInInventory:"在庫存中查看",measuredWeightError:"稱量重量必須在 {{min}}g 到 {{max}}g 之間。",slicerFilament:"切片耗材",slicerFilamentName:"切片預設名稱",slicerPreset:"切片預設",searchPresets:"搜尋耗材預設...",selectedPreset:"已選擇",noPresetsFound:"未找到預設",tempOverrides:"溫度覆蓋",note:"備註",notePlaceholder:"關於此耗材的任何備註...",category:"類別",categoryPlaceholder:"例如：生產、原型、客戶A",categoryNone:"未分類",storageLocationNone:"未設定位置",lowStockThresholdOverride:"低庫存閾值（此料盤）",lowStockThresholdOverrideHelp:"留空以使用全域閾值（{{global}}%）。",clearRfid:"清除 RFID 標籤",rfidCleared:"RFID 標籤已清除",archive:"歸檔",restore:"恢復",noSpools:"尚無耗材。新增您的第一個耗材開始使用。",noAvailableSpools:"沒有可用的耗材。請先向庫存中新增耗材，或從其他槽位取消指派一個耗材。",kProfiles:"K 值設定",addKProfile:"新增 K 值設定",assignSpool:"分配耗材",unassignSpool:"取消分配",assignSuccess:"耗材已分配，AMS 槽位已設定",assignFailed:"分配耗材失敗",assignMismatchTitle:"材料不符",assignMismatchMessage:'所選料盤材料 "{{spoolMaterial}}" 與 {{location}} 的料槽材料 "{{trayMaterial}}" 不符。仍要分配嗎？',assignMismatchConfirm:"仍然分配",assignPartialMismatchMessage:'料盤材料 "{{spoolMaterial}}" 與 {{location}} 的 "{{trayMaterial}}" 相近但不完全一致。是否繼續？',assignProfileMismatchMessage:'料盤設定 "{{spoolProfile}}" 與 {{location}} 的料槽設定 "{{trayProfile}}" 不一致。是否繼續？',assignReconfigureNote:"AMS 槽位將重新設定為使用料盤的設定。",selectSpool:"選擇要分配到此槽位的耗材",assigned:"已分配",assigning:"分配中...",searchSpools:"搜尋耗材...",showAllSpools:"顯示所有耗材",spoolmanSpools:"Spoolman 線軸",allMaterials:"所有材料",filterByBrand:"按品牌篩選...",showArchived:"顯示已歸檔",quickAdd:"快速新增（庫存）",quantity:"數量",stock:"庫存",configured:"已設定",spoolsCreated:"已建立 {{count}} 個耗材",spoolsPartiallyCreated:"已建立 {{created}} / {{total}} 個耗材（部分失敗）",spoolCreated:"耗材已建立",spoolUpdated:"耗材已更新",spoolDeleted:"耗材已刪除",deepLinkSpoolNotFound:"找不到耗材",deepLinkFetchFailed:"無法載入耗材 — 請重試",spoolArchived:"耗材已歸檔",spoolRestored:"耗材已恢復",kProfileSaveFailed:"K值設定檔設定無法儲存",syncWeightSpoolNotFound:"找不到耗材 — 可能已被刪除",syncWeightSpoolmanUnreachable:"Spoolman 無法存取 — 請稍後再試",syncWeightFailed:"重量同步失敗",spoolmanUnreachable:"Spoolman 無法存取 — 請稍後再試",deleteSpoolNotFound:"找不到耗材 — 可能已被刪除",deleteFailed:"刪除耗材失敗",archiveSpoolNotFound:"找不到耗材 — 可能已被刪除",archiveFailed:"歸檔耗材失敗",restoreSpoolNotFound:"找不到耗材 — 可能已被刪除",restoreFailed:"恢復耗材失敗",saveFailed:"儲存變更失敗",tagClearFailed:"清除標籤失敗",deleteConfirm:"確定要刪除此耗材嗎？此操作無法復原。",archiveConfirm:"確定要歸檔此耗材嗎？",advancedSettings:"進階設定",filamentInfoTab:"耗材資訊",paProfileTab:"PA 設定",filamentInfo:"耗材",additional:"附加",loadingPresets:"載入雲端預設中...",cloudConnected:"雲端已連線",cloudNotConnected:"雲端未連線（使用預設值）",recentColors:"最近",searchColors:"搜尋顏色...",searchResults:"搜尋結果",allColors:"所有顏色",commonColors:"常用顏色",showLess:"顯示更少",showAll:"顯示全部",noColorsFound:"沒有顏色匹配您的搜尋",noResults:"未找到匹配項",extraColorsLabel:"附加顏色",extraColorsPlaceholder:"EC984C,#6CD4BC,A66EB9,D87694",extraColorsHint:"貼上 2 至 8 個十六進位色值,以逗號分隔。將以漸層方式呈現。",extraColorsInvalid:"已略過無效的十六進位值:{{tokens}}",colorEffectLabel:"效果",colorEffect:{none:"無",sparkle:"閃光",wood:"木紋",marble:"大理石",glow:"夜光",matte:"霧面",silk:"絲光",galaxy:"星空",rainbow:"彩虹",metal:"金屬",translucent:"半透明",gradient:"漸層",dualColor:"雙色",triColor:"三色",multicolor:"多色"},selectMaterialFirst:"請先在耗材資訊分頁中選擇材料。",noPrintersConfigured:"未設定印表機。新增印表機以使用 PA 設定。",matchingFilter:"匹配",anyBrand:"任何品牌",anyVariant:"任何變體",autoSelect:"自動選擇",matches:"匹配",match:"匹配",noMatches:"無匹配",connected:"已連線",offline:"離線",printerOffline:"印表機離線。連線後檢視校準設定。",noKProfilesMatch:"沒有 K 值設定匹配所選耗材。",leftNozzle:"左噴嘴",rightNozzle:"右噴嘴",profilesSelected:"個校準設定已選擇",totalInventory:"總庫存",totalConsumed:"總消耗",byMaterial:"按材料",inPrinter:"在印表機中",lowStock:"庫存不足",sinceTracking:"自開始追蹤",resetConsumedCounter:"重置計數器",resetConsumedCounterTooltip:"將此料盤的已消耗克數計數器歸零。剩餘重量不會變更。",resetConsumedCounterConfirm:"將此料盤的已消耗克數計數器重置為 0？後續列印將從零開始計算。料盤本身、剩餘重量計算與您的設定均不會變更。",resetAllConsumedCounters:"重置所有計數器",resetAllConsumedCountersTooltip:"將每個料盤的已消耗克數計數器歸零。剩餘重量不會變更。",resetAllConsumedCountersConfirm:"將全部 {{count}} 個料盤（含已封存）的已消耗克數計數器重置為 0？這將清空「累計消耗」統計值，後續列印從零開始計算。料盤與剩餘重量不會變更。",consumedCounterReset:"計數器已重置",allConsumedCountersReset:"已重置 {{count}} 個料盤的計數器",resetConsumedCounterFailed:"重置計數器失敗",loadedInAms:"已裝載到 AMS/外接",remaining:"剩餘",weightCheck:"重量檢查",lastWeighed:"上次稱量",neverWeighed:"從未稱量",search:"搜尋耗材...",showing:"顯示",to:"到",of:"共",show:"顯示",spools:"個耗材",spool:"個耗材",page:"頁",noSpoolsMatch:"未找到結果",noSpoolsMatchDesc:"嘗試調整您的搜尋或篩選條件。",active:"活躍",archived:"已歸檔",all:"全部",used:"已使用",new:"新的",clearFilters:"清除篩選",table:"表格",cards:"卡片",net:"淨重",groupSimilar:"分組",groupedSpools:"{{count}} 個相同耗材",groupedRows:"行",columns:"列",configureColumns:"設定列",configureColumnsDesc:"拖曳以重新排序列或使用箭頭。使用眼睛圖示切換可見性。",visible:"可見",reset:"重設",cancel:"取消",applyChanges:"套用更改",moveUp:"上移",moveDown:"下移",hideColumn:"隱藏列",showColumn:"顯示列",linkToSpool:"連結到耗材",tagLinked:"標籤已連結到耗材",tagLinkFailed:"連結標籤失敗",tagAlreadyLinked:"標籤已連結到其他耗材",unknownTag:"偵測到未知 RFID 標籤",usageHistory:"使用歷史",noUsageHistory:"尚無使用紀錄",printName:"列印名稱",weightConsumed:"消耗重量",clearHistory:"清除",historyCleared:"使用歷史已清除",fillSourceLabel:"(庫存)",lowStockThresholdError:"閾值必須在 0.1 到 99.9 之間",spoolmanFilamentCatalog:"Spoolman 耗材目錄",pickFromSpoolmanCatalog:"從 Spoolman 目錄選擇…",spoolmanFilamentSelected:"已從 Spoolman 目錄選擇耗材",spoolmanFilamentUnlinked:"已解除耗材目錄關聯",noSpoolmanFilaments:"Spoolman 目錄中未找到耗材",spoolmanFilamentColorSwatch:"耗材顏色",spoolWeightManagedBySpoolman:"空線軸重量在 Spoolman 中按耗材類型管理",spoolmanCatalogLoadFailed:"無法載入 Spoolman 耗材目錄"},timelapse:{title:"縮時攝影",create:"建立縮時攝影",download:"下載",delete:"刪除",preview:"預覽",frameRate:"幀率",quality:"品質",processing:"處理中...",noTimelapses:"無可用縮時攝影"},ams:{title:"AMS",slot:"槽位",empty:"空",emptySlot:"空槽位",slotEmpty:"空",emptySlotReset:"未指派線材",unknown:"未知",humidity:"濕度",temperature:"溫度",filamentType:"耗材類型",filamentColor:"顏色",remaining:"剩餘",history:"AMS 歷史",noHistory:"無可用歷史",configureSlot:"設定槽位",externalSpool:"外接耗材",profile:"設定",kFactor:"K 值",fill:"填充",configure:"設定",used:"已使用",remainingUnit:"剩餘"},printModal:{title:"開始列印",selectPrinter:"選擇印表機",selectPlate:"選擇板",filamentMapping:"耗材對應",totalCost:"總成本：",slotRemainingShort:" - 剩餘 {{grams}}g",printSettings:"列印設定",bedLeveling:"熱床調平",flowCalibration:"流量校準",vibrationCalibration:"振動校準",layerInspection:"首層檢查",timelapse:"縮時攝影",startPrint:"開始列印",addToQueue:"新增到佇列",cancel:"取消",noPrintersAvailable:"無可用印表機",printerBusy:"印表機忙碌",printerOffline:"印表機離線",sameTypeDifferentColor:"相同類型，不同顏色",filamentTypeNotLoaded:"耗材類型未裝載",openCalendar:"開啟日曆",leftNozzle:"左",rightNozzle:"右",leftNozzleTooltip:"左噴嘴",rightNozzleTooltip:"右噴嘴",filamentOverride:"耗材覆蓋",filamentOverrideHint:"可選覆蓋用於基於模型的耗材分配。排程器將使用您選擇的耗材而不是原始 3MF 值進行匹配。",originalFilament:"原始",overrideWith:"覆蓋為",resetToOriginal:"恢復為原始",insufficientFilamentTitle:"耗材不足",insufficientFilamentMessage:"部分已分配料盤的剩餘耗材少於本次列印所需：",insufficientFilamentLine:"{{printer}} - {{slot}}：需要 {{required}}g，剩餘 {{remaining}}g",printAnyway:"仍然列印",forceColorMatch:"強制顏色匹配",staggerPrinterStarts:"錯開印表機啟動",staggerGroupSize:"群組大小",staggerInterval:"間隔（分鐘）",staggerPreview:"{{printers}} 台印表機 → 分成 {{groups}} 組，每組 {{size}} 台，每 {{interval}} 分鐘啟動一組",staggerLastGroup:"最後一組：{{count}}",staggerTotal:"總計：{{minutes}} 分鐘",staggerToPrinters:"分批傳送到 {{count}} 臺印表機",gcodeInjection:"注入自動列印G-code"},backup:{includesEncryptionKey:"本機備份包含 MFA 加密金鑰檔案（DATA_DIR/.mfa_encryption_key），因此備份 ZIP 是自包含的。請將 ZIP 視為敏感檔案 — 任何擁有該檔案的人都可以解密內部儲存的 OIDC 用戶端機密和 TOTP 機密。",title:"備份與恢復",createBackup:"建立備份",restoreBackup:"恢復備份",restoreDescription:"從備份檔案替換所有資料",downloadBackup:"下載備份",uploadBackup:"上傳備份",lastBackup:"上次備份",autoBackup:"自動備份",backupNow:"立即備份",restoreWarning:"警告：恢復備份將覆蓋所有目前資料。",includeArchives:"包含歸檔",includeSettings:"包含設定",includeProfiles:"包含設定檔案",backupSuccess:"備份建立成功",restoreSuccess:"備份恢復成功",backupFailed:"備份失敗",restoreFailed:"恢復失敗",restoreNote:"恢復期間虛擬印表機將停止",githubBackup:"GitHub 備份",enabled:"已啟用",cloudLoginRequired:"需要登入 Bambu Cloud。請在 設定檔案 → 雲設定檔案 中登入以啟用 GitHub 備份。",cloudLoginRequiredShort:"需要雲端登入",githubDescription:"自動將您的設定檔案同步到私有 GitHub 倉庫以進行備份和版本歷史紀錄。",repoIsPrivate:"儲存庫為私有 — 可安全備份。",repoIsPublicWarning:"儲存庫為公開（PUBLIC）。Bambuddy 備份包含 MQTT 認證、Home Assistant 權杖、Prometheus 權杖、您的 Bambu Cloud 電子郵件，以及透過 K-profile 暴露的印表機存取碼。在您於服務商設定中將儲存庫改為私有之前，儲存將被阻擋。",repoVisibilityUnknown:"無法確認儲存庫的可見性。Bambuddy 拒絕向任何未確認為私有的目標進行備份；儲存將被阻擋。",repositoryUrl:"倉庫 URL",repoUrlPlaceholderGitHub:"https://github.com/username/repo-name",repoUrlPlaceholderGitea:"https://gitea.example.com/username/repo-name",repoUrlPlaceholderForgejo:"https://forgejo.example.com/username/repo-name",repoUrlPlaceholderGitLab:"https://gitlab.com/username/repo-name",allowInsecureHttp:"允許不安全的 HTTP",allowInsecureHttpHint:"為無 TLS 的私人網路自托管執行個體啟用",personalAccessToken:"個人存取權杖",tokenSaved:"（已儲存）",enterNewToken:"輸入新權杖以更新",tokenHint:"具有內容讀寫權限的細粒度權杖",branch:"分支",provider:"Git 供應商",providerGitHub:"GitHub",providerGitLab:"GitLab",providerGitea:"Gitea",providerForgejo:"Forgejo",manualOnly:"僅手動",hourly:"每小時",daily:"每天",weekly:"每週",includeInBackup:"包含在備份中",kProfiles:"K 設定檔案",kProfilesDescription:"來自已連線印表機的壓力推進校準",noPrintersConnected:"沒有印表機連線",printersConnected:"{{connected}}/{{total}} 已連線",cloudProfiles:"雲設定檔案",cloudProfilesDescription:"來自 Bambu Cloud 的耗材、印表機和工藝預設",appSettings:"應用程式設定",appSettingsDescription:"Bambuddy 設定（完整資料庫）",spoolInventory:"耗材庫存",spoolInventoryDescription:"耗材卷軸、使用紀錄和成本追蹤",printArchives:"列印檔案",printArchivesDescription:"列印歷史中繼資料（不含 gcode/3MF 檔案）",lastBackupAt:"上次備份：",noBackupsYet:"尚無備份",next:"下次：",startingBackup:"正在啟動備份...",test:"測試",enableBackup:"啟用備份",testConnection:"測試連線",enterRepoUrl:"請輸入倉庫 URL",enterRepoAndToken:"請輸入倉庫 URL 和存取權杖",repoRequired:"倉庫 URL 為必填項",tokenRequired:"存取權杖為必填項",githubBackupEnabled:"GitHub 備份已啟用",tokenUpdated:"權杖已更新",settingsSaved:"設定已儲存",failedToSave:"儲存失敗：{{message}}",backupCompleteFiles:"備份完成 - {{count}} 個檔案已更新",backupSkippedNoChanges:"備份已跳過 - 無更改",backupFailed2:"備份失敗：{{message}}",clearedLogs:"已清除 {{count}} 條日誌",failedToClearLogs:"清除日誌失敗：{{message}}",history:"歷史紀錄",clear:"清除",date:"日期",status:"狀態",commit:"提交",localBackup:"本機備份",localBackupDescription:"建立 Bambuddy 資料的完整備份，包括資料庫、檔案、上傳和所有檔案。",downloadBackupLabel:"下載備份",completeBackupZip:"完整備份：資料庫 + 所有檔案（ZIP）",download:"下載",preparingBackup:"正在準備備份...",creatingArchive:"正在建立備份歸檔...對於大型歸檔可能需要一些時間。",downloadingFile:"正在下載備份檔案...",backupDownloaded:"備份下載成功",failedToCreateBackup:"建立備份失敗：{{message}}",restore:"恢復",restoreReplacesAll:"恢復將替換所有資料。",restoreReplacesAllDetail:"您目前的資料庫和檔案將被完全替換。恢復後需要重新啟動。",restoreConfirmTitle:"恢復備份",restoreConfirmMessage:'您確定要從"{{filename}}"恢復嗎？這將完全替換您目前的資料庫和所有檔案。恢復後需要重新啟動應用程式。',restoreConfirmButton:"恢復備份",uploadingFile:"正在上傳備份檔案...",backupRestoredRestart:"備份已恢復。請重新啟動 Bambuddy。",failedToRestore:"恢復備份失敗。請檢查檔案格式。",reloadNow:"立即重新載入",creatingBackup:"正在建立備份",restoringBackup:"正在恢復備份",preparing:"準備中...",processing:"處理中...",doNotClosePage:"請不要關閉此頁面或離開頁面。對於大型備份，此操作可能需要幾分鐘。",restoring:"恢復中...",restoreComplete:"恢復完成",restoreFailed2:"恢復失敗",importSettings:"從備份檔案匯入設定",pleaseWaitRestoring:"請等待資料恢復中",selectBackupFile:"點選選擇備份檔案（.json 或 .zip）",duplicateHandling:"重複項處理方式：",matchPrinters:"印表機",matchPrintersBy:"按序列號匹配",matchSmartPlugs:"智慧插座",matchSmartPlugsBy:"按 IP 位址匹配",matchNotificationProviders:"通知提供者",matchNotificationProvidersBy:"按名稱匹配",matchFilaments:"耗材",matchFilamentsBy:"按名稱 + 類型 + 品牌匹配",matchArchives:"檔案",matchArchivesBy:"按內容雜湊匹配（始終跳過）",matchPendingUploads:"待上傳",matchPendingUploadsBy:"按檔名匹配",matchSettingsTemplates:"設定和範本",matchSettingsTemplatesBy:"始終覆蓋",replaceExisting:"替換現有資料",keepExisting:"保留現有資料",overwriteDescription:"用備份資料覆蓋已存在的項目",keepDescription:"僅恢復尚不存在的項目",overwriteCaution:"注意：",overwriteWarning:"覆蓋將用備份資料替換您目前的設定。出於安全考慮，印表機存取碼永遠不會被覆蓋。",cancel:"取消",processingBackup:"正在處理備份檔案...",itemsRestored:"已恢復項目",itemsSkipped:"已跳過項目",restored:"已恢復",skippedAlreadyExist:"已跳過（已存在）",filesCategory:"檔案（3MF、縮圖等）",andMore:"...還有 {{count}} 項",newApiKeysGenerated:"已產生新的 API 金鑰",keysShownOnce:"這些金鑰僅顯示一次。請立即複製！",copy:"複製",noDataFound:"在備份檔案中未找到可恢復的資料。",close:"關閉",scheduledBackup:"排程備份",scheduledBackupDescription:"依排程自動建立備份快照。輸出目錄可掛載到 NAS 或外部儲存。",frequency:"頻率",backupTime:"時間",retention:"保留",retentionDescription:"保留的備份數量",outputPath:"輸出路徑",outputPathPlaceholder:"預設：{{path}}",outputPathDescription:"留空以使用預設位置",runNow:"立即執行",backupFiles:"備份檔案",noScheduledBackups:"尚無備份",deleteBackup:"刪除",deleteBackupConfirm:"要刪除此備份檔案嗎？",backupRunning:"備份進行中…",scheduledBackupComplete:"備份已成功完成",scheduledBackupFailed:"備份失敗",nextBackup:"下次備份",backupSize:"大小",localTimeHint:"本地時間 ({{tz}})",defaultPathLabel:"預設：",categories:{settings:"設定",notification_providers:"通知提供者",notification_templates:"通知範本",smart_plugs:"智慧插座",printers:"印表機",filaments:"耗材",maintenance_types:"維護類型",archives:"檔案",projects:"專案",pending_uploads:"待上傳",external_links:"外部連結",api_keys:"API 金鑰"}},tags:{title:"標籤",addTag:"新增標籤",editTag:"編輯標籤",deleteTag:"刪除標籤",tagName:"標籤名稱",tagColor:"標籤顏色",noTags:"無標籤",deleteConfirm:"確定要刪除此標籤嗎？",manageTags:"管理標籤"},uploadModal:{title:"上傳 3MF 檔案",dragDrop:"將 .3mf 檔案拖放到此處",or:"或",browseFiles:"瀏覽檔案",extractionInfo:"將從 3MF 檔案中繼資料中自動提取印表機型號。",uploaded:"已上傳",failed:"失敗",uploading:"上傳中...",upload:"上傳",uploadFailed:"上傳失敗"},editArchive:{title:"編輯歸檔",name:"名稱",namePlaceholder:"列印名稱",printer:"印表機",noPrinter:"無印表機",project:"專案",noProject:"無專案",itemsPrinted:"列印數量",itemsPrintedHelp:"此列印任務中生產的物品數量",notes:"備註",notesPlaceholder:"新增關於此列印的備註...",externalLink:"外部連結",externalLinkPlaceholder:"https://printables.com/model/...",externalLinkHelp:"連結到 Printables、Thingiverse 或其他來源",tags:"標籤",tagsPlaceholder:"新增標籤...",addMoreTags:"新增更多標籤...",matchingTags:'匹配"{{query}}"',existingTags:"現有標籤",clickToAdd:"（點選新增）",status:"狀態",failureReason:"失敗原因",selectReason:"選擇原因...",photos:"列印成品照片",photosHelp:"點選 + 新增列印成品照片",printResult:"列印成品",saving:"儲存中...",failureReasons:{adhesionFailure:"附著力失敗",spaghettiDetached:"拉絲 / 脫落",layerShift:"層偏移",cloggedNozzle:"噴嘴堵塞",filamentRunout:"耗材用完",warping:"翹曲",stringing:"拉絲",underExtrusion:"擠出不足",powerFailure:"斷電",userCancelled:"使用者取消",other:"其他"},statuses:{completed:"已完成",failed:"失敗",aborted:"已取消",printing:"列印中"}},kProfiles:{title:"K 值設定",noPrintersConfigured:"未設定印表機",addPrinterInSettings:"在設定中新增印表機以管理 K 值設定",noActivePrinters:"無活躍印表機",enablePrinterConnection:"啟用印表機連線以檢視其 K 值設定",loadingProfiles:"載入 K 值設定中...",printerOffline:"印表機離線",printerOfflineDesc:"所選印表機未連線。開啟電源以檢視 K 值設定。",noMatchingProfiles:"無匹配的設定",noMatchingProfilesDesc:"沒有設定匹配您的搜尋條件",noKProfiles:"無 K 值設定",noKProfilesDesc:"未找到 {{diameter}}mm 噴嘴的壓力推進設定",createFirstProfile:"建立第一個設定",printer:"印表機",nozzle:"噴嘴",refresh:"重新整理",addProfile:"新增設定",export:"匯出",import:"匯入",select:"選擇",selectAll:"全選",delete:"刪除",searchPlaceholder:"按名稱或耗材搜尋...",allExtruders:"所有擠出機",leftOnly:"僅左側",rightOnly:"僅右側",allFlow:"所有流量",hfOnly:"僅高流量",sOnly:"僅標準",sortName:"排序：名稱",sortKValue:"排序：K 值",sortFilament:"排序：耗材",leftExtruder:"左擠出機",rightExtruder:"右擠出機",modal:{addTitle:"新增 K 值設定",editTitle:"編輯 K 值設定",profileName:"設定名稱",profileNamePlaceholder:"我的 PLA 設定",kValue:"K 值",kValuePlaceholder:"0.020",kValueHelp:"典型範圍：PLA 0.01 - 0.06，PETG 0.02 - 0.10",filament:"耗材",selectFilament:"選擇耗材...",noFilamentsHelp:"未找到耗材。請先在 Bambu Studio 中建立 K 值設定。",flowType:"流量類型",highFlow:"高流量",standard:"標準",nozzleSize:"噴嘴尺寸",extruder:"擠出機",extruders:"擠出機",left:"左",right:"右",notes:"備註（本機儲存）",notesPlaceholder:"新增關於此設定的備註...",notesHelp:"備註儲存在 Bambuddy 中，不在印表機上",syncing:"與印表機同步中...",savingExtruder:"儲存到擠出機 {{current}}/{{total}}...",pleaseWait:"請稍候"},deleteConfirm:{title:"刪除設定",cannotUndo:"此操作無法復原",message:'確定要從印表機刪除"{{name}}"嗎？'},bulkDelete:{title:"刪除設定",cannotUndo:"此操作無法復原",message:"確定要從印表機刪除 {{count}} 個選中的設定嗎？"},toast:{profileSaved:"K 值設定已儲存",profilesSaved:"K 值設定已儲存到 {{count}} 個擠出機",selectAtLeastOneExtruder:"請至少選擇一個擠出機",profileDeleted:"K 值設定已刪除",profilesDeleted:"已刪除 {{count}} 個設定",exportedProfiles:"已匯出 {{count}} 個設定",importedProfiles:"已匯入 {{count}} / {{total}} 個設定",noProfilesToExport:"無可匯出的設定",invalidFileFormat:"無效的檔案格式",failedToParseImport:"解析匯入檔案失敗",failedToSaveBatch:"批次儲存 K 值設定失敗",noteSaved:"備註已儲存",failedToSaveNote:"儲存備註失敗"},permission:{noRead:"您沒有重新整理設定的權限",noCreate:"您沒有新增設定的權限",noUpdate:"您沒有更新 K 值設定的權限",noDelete:"您沒有刪除 K 值設定的權限",noExport:"您沒有匯出設定的權限",noImport:"您沒有匯入設定的權限"}},virtualPrinter:{title:"虛擬印表機",running:"執行中",stopped:"已停止",description:{default:"啟用虛擬印表機，使其在 Bambu Studio 和 OrcaSlicer 中可見。傳送到此印表機的檔案將直接歸檔而不列印。",proxy:"啟用代理，將切片軟體流量中繼到真實印表機，允許在任何網路上遠端列印。"},enable:{title:"啟用虛擬印表機",visibleInSlicer:'在切片軟體發現中顯示為"Bambuddy"',proxyingTo:"代理到 {{name}}",notActive:"未啟用"},model:{title:"印表機型號",description:"選擇要模擬的印表機型號。",restartWarning:"更改型號將重新啟動虛擬印表機"},accessCode:{title:"存取碼",isSet:"存取碼已設定",notSet:"未設定存取碼 - 需要設定才能啟用",placeholder:"輸入 8 位字元程式碼",placeholderChange:"輸入新程式碼以更改",hint:"必須恰好 8 個字元。切片軟體使用此程式碼進行認證。",charCount:"({{count}}/8)"},targetPrinter:{title:"目標印表機",configured:"代理目標已設定",notConfigured:"未選擇目標印表機 - 代理模式需要設定",placeholder:"選擇印表機...",hint:"選擇要將切片軟體流量代理到的印表機。印表機必須處於區域網路模式。",noPrinters:"未設定印表機。請先新增印表機以使用代理模式。"},remoteInterface:{title:"網路介面覆蓋",configured:"介面覆蓋已啟用",optional:"可選 - 當自動檢測的 IP 不正確時使用（例如多網路卡、Docker、VPN）",placeholder:"自動檢測（預設）...",hint:"覆蓋透過 SSDP 廣播並在 TLS 憑證中使用的 IP 位址。在 Bambuddy 有多個網路介面時很有用。"},mode:{title:"模式",archive:"歸檔",archiveDesc:"立即歸檔檔案",review:"審核",reviewDesc:"歸檔前審核",queue:"佇列",queueDesc:"歸檔並新增到佇列",proxy:"代理",proxyDesc:"中繼到真實印表機"},autoDispatch:{title:"自動派發",description:"新增到佇列時自動開始列印。關閉後，列印任務等待手動派發。"},queueForceColorMatch:{title:"強制顏色匹配",description:"拒絕派發到沒有完全相同耗材類型和顏色的印表機。預設關閉 — 不啟用時，佇列僅按型號匹配，可能選到顏色錯誤的印表機。"},tailscaleDisabled:{title:"Tailscale 整合",description:"啟用以將此 VP 標記為透過 Tailscale 公開。顯示主機的 Tailscale 位址，以便您知道要貼上到切片器中的 IP。CA 匯入步驟保持不變 — 此切換對憑證無影響。"},setupRequired:{title:"需要設定",description:"虛擬印表機功能需要額外的系統設定才能工作。包括埠轉發、防火牆規則和平臺特定設定。",readGuide:"啟用前請閱讀設定指南"},archiveNameSource:{title:"存檔名稱來源",description:'選擇透過虛擬印表機接收檔案時新存檔的命名方式。"元資料"使用 3MF 中嵌入的切片標題（預設）。"檔名"使用 Bambu Studio 透過 FTP 傳送的檔案名稱 — 當您在"傳送到印表機"對話方塊中重新命名工作時非常有用。',metadata:"元資料",filename:"檔名"},caCert:{title:"切片軟體憑證",description:"虛擬印表機使用由 Bambuddy CA 簽發的 TLS 憑證。將此 CA 憑證匯入切片軟體的信任庫一次，切片軟體即可接受連線 — 無需再透過命令列取得。",copy:"複製",copied:"已複製",download:"下載",fingerprint:"SHA-256"},howItWorks:{title:"工作原理",step1:"在同一區域網路中，虛擬印表機會透過發現機制自動出現在您的切片軟體（Bambu Studio / OrcaSlicer）中。從其他網路，透過 IP 位址和存取碼手動新增。",step2:'在歸檔、審核和佇列模式下，使用切片軟體中的"傳送"按鈕將 3MF 檔案上傳到 Bambuddy。切片軟體會顯示"列印成功"— 檔案已儲存，未列印。',step3:"在代理模式下，虛擬印表機將所有流量中繼到真實印表機 — 列印會立即開始，就像直接連線一樣。"},status:{title:"狀態詳情",printerName:"印表機名稱",model:"型號",serialNumber:"序列號",mode:"模式",pendingFiles:"待處理檔案",targetPrinter:"目標印表機",ftpPort:"FTP 連接埠",mqttPort:"MQTT 連接埠",ftpConnections:"FTP 連線",mqttConnections:"MQTT 連線"},toast:{updated:"虛擬印表機設定已更新",failedToUpdate:"更新設定失敗",copyFailed:"複製失敗 — 請手動選取文字",accessCodeRequired:"請先設定存取碼",targetPrinterRequired:"請先選擇目標印表機",bindIpRequired:"請先設定繫結 IP",accessCodeEmpty:"存取碼不能為空",accessCodeLength:"存取碼必須恰好 8 個字元",created:"虛擬印表機已建立",failedToCreate:"建立虛擬印表機失敗",deleted:"虛擬印表機已刪除",failedToDelete:"刪除虛擬印表機失敗"},list:{title:"虛擬印表機",add:"新增",addFirst:"新增虛擬印表機",empty:"未設定虛擬印表機。新增一個以開始使用。"},bindIp:{title:"繫結介面",placeholder:"選擇介面...",hint:"此虛擬印表機繫結的網路介面。每臺印表機必須唯一。"},proxy:{accessCodeHint:"在代理模式下，在切片軟體中使用目標印表機的存取碼。連線會透明轉發到真實印表機。"},addDialog:{title:"新增虛擬印表機",name:"名稱",hint:"建立後可以設定存取碼、目標印表機和其他設定。",create:"建立"},deleteConfirm:{title:"刪除虛擬印表機",message:'確定要刪除"{{name}}"嗎？這將停止此印表機的所有服務。'}},modelViewer:{openInSlicer:"在切片軟體中開啟",tabs:{model:"3D 模型",gcode:"G-code 預覽"},notAvailable:"不可用",notSliced:"未切片",plates:"板",allPlates:"所有板",plateNumber:"板 {{number}}",plateCount:"{{count}} 個板",plateCount_other:"{{count}} 個板",objectCount:"{{count}} 個物件",objectCount_other:"{{count}} 個物件",filamentCount:"{{count}} 種耗材",filamentCount_other:"{{count}} 種耗材",eta:"預計 {{minutes}} 分鐘",noPreview:"此檔案無可用預覽",pagination:{pageOf:"第 {{current}} / {{total}} 頁",prev:"上一頁",next:"下一頁"},errors:{failedToLoad:"載入檔案失敗",noMeshes:"3MF 檔案中未找到網格",unsupportedFormat:"不支援的檔案格式"}},maintenanceDescriptions:{lubricateCarbonRods:"在碳纖維杆上塗抹潤滑劑以確保順暢運動",lubricateRails:"在線性導軌上塗抹潤滑劑以確保順暢運動",cleanNozzle:"清潔熱端和噴嘴以防止堵塞",checkBelts:"檢查皮帶張力以確保列印精度",cleanBuildPlate:"清潔列印板以獲得更好的附著力",checkExtruder:"檢查擠出機齒輪磨損情況",checkCooling:"確保冷卻風扇正常工作",generalInspection:"印表機綜合檢查",cleanCarbonRods:"清潔碳纖維杆以減少摩擦",lubricateSteelRods:"在鋼杆上塗抹潤滑劑以確保順暢運動",cleanSteelRods:"清潔鋼杆以減少摩擦",cleanLinearRails:"擦拭線性導軌以清除灰塵和碎屑",checkPtfeTube:"檢查 PTFE 管的磨損或損壞",replaceHepaFilter:"更換 HEPA 過濾器以保證空氣品質",replaceCarbonFilter:"更換活性炭過濾器",lubricateLeftNozzleRail:"潤滑左噴嘴導軌（H2 系列）"},smartPlugs:{offline:"離線",admin:"管理",openPlugAdminPage:"開啟插座管理頁面",deleteSmartPlug:"刪除智慧插座",turnOnSmartPlug:"開啟智慧插座",turnOffSmartPlug:"關閉智慧插座",turnOn:"開啟",turnOff:"關閉",addSmartPlug:{scanningNetwork:"掃描網路中...",chooseEntity:"選擇實體...",connectionFailed:"連線失敗",searchEntities:"搜尋實體...",searchPowerSensors:"搜尋功率感測器...",searchEnergySensors:"搜尋能量感測器...",placeholders:{plugName:"客廳插座",mqttStateOnValue:"ON、true、1",mqttSameAsPower:"與功率主題相同，或不同"}},linkedTo:"連結到：",monitorOnly:"僅監控",alerts:"警報",scheduleOn:"開啟 {{time}}",scheduleOff:"關閉 {{time}}",on:"開啟",off:"關閉",power:"功率",kwhToday:"今日kWh",settings:"設定",automationSettings:"自動化設定",showInSwitchbar:"在開關欄顯示",quickAccessSidebar:"從側邊欄快速存取",enabled:"已啟用",enableAutomation:"為此插座啟用自動化",autoOn:"自動開啟",autoOnDescription:"列印開始時開啟",autoOff:"自動關閉",autoOffDescription:"列印完成時關閉（一次性）",autoOffPersistent:"保持啟用",autoOffPersistentDescription:"在列印之間保持啟用而非一次性",autoOffAfterDrying:"乾燥完成後自動關閉",autoOffAfterDryingDescription:"AMS 乾燥完成後關閉",delayAfterDryingMinutes:"乾燥後延遲（分鐘）",turnOffDelayMode:"關閉延遲模式",time:"時間",temp:"溫度",delayMinutes:"延遲（分鐘）",tempThreshold:"溫度閾值（°C）",tempThresholdDescription:"當噴嘴冷卻到此溫度以下時關閉",edit:"編輯",deleteConfirm:'確定要刪除"{{name}}"嗎？此操作無法復原。',turnOnConfirm:'確定要開啟"{{name}}"嗎？',turnOffConfirm:'確定要關閉"{{name}}"嗎？這將切斷連線裝置的電源。',failedToTurn:'無法{{action}}"{{name}}"',unknown:"未知",addTitle:"新增智慧插座",editTitle:"編輯智慧插座",stopScanning:"停止掃描",discoverTasmota:"發現Tasmota裝置",foundDevices:"找到{{count}}個裝置 - 點選選擇：",noDevicesFound:"未在您的網路中找到Tasmota裝置",haNotConfigured:"Home Assistant未設定。請在以下位置設定",haSettingsPath:"設定 → 網路 → Home Assistant",selectEntity:"選擇實體 *",ipAddress:"IP 位址 *",nameLabel:"名稱 *",username:"使用者名稱",password:"密碼",authHint:"如果您的Tasmota裝置不需要認證，請留空",linkToPrinter:"連結印表機",noPrinter:"無印表機（僅手動控制）",linkingDescription:"連結後可在列印開始/完成時自動開關",powerAlerts:"功率警報",alertAbove:"高於時警報（W）",alertBelow:"低於時警報（W）",alertDescription:"當電力消耗超過這些閾值時收到通知。留空以停用該方向。",dailySchedule:"每日計畫",turnOnAt:"開啟時間",turnOffAt:"關閉時間",scheduleDescription:"每天在這些時間自動開關插座。留空以跳過該操作。",showOnPrinterCard:"在印表機卡片上顯示",displayOnPrinterCard:"在印表機卡片上顯示按鈕",connectedResult:"已連線！",deviceLabel:"裝置：{{name}} - ",stateLabel:"狀態：{{state}}",test:"測試",delete:"刪除",save:"儲存",add:"新增",cancel:"取消",failedToStartScan:"無法開始掃描",nameRequired:"名稱為必填項",entityRequired:"Home Assistant插座需要實體",mqttTopicRequired:"必須為功率、能源或狀態監控設定至少一個MQTT主題",loadingEntities:"正在載入實體...",loading:"載入中...",failedToLoadEntities:"載入實體失敗：{{error}}",noEntitiesMatching:'未找到匹配"{{search}}"的實體',noEntitiesAvailable:"無可用實體",searchingEntities:"搜尋所有實體（找到{{count}}個）",showingEntities:"顯示 switch、light、input_boolean（{{count}}個可用）",energyMonitoringOptional:"能源監控（可選）",energyMonitoringHint:"搜尋並選擇提供功率/能源資料的感測器。",powerSensorW:"功率感測器（W）",energyTodayKwh:"今日能源（kWh）",totalEnergyKwh:"總能源（kWh）",noMatchingSensors:"無匹配的感測器",none:"無",mqttNotConfigured:"MQTT代理未設定。請在以下位置設定代理地址",mqttSettingsPath:"設定 → 網路 → MQTT發布",mqttNotConfiguredSuffix:"（您不需要啟用發布，只需填寫代理詳細資訊）。",mqttMonitorOnlyDescription:"MQTT插座透過MQTT訂閱接收功率/能源資料。開關控制不可用 - 請使用您的MQTT代理或家庭自動化系統。",powerMonitoring:"功率監控",energyMonitoring:"能源監控",stateMonitoring:"狀態監控",optional:"可選",topic:"主題",jsonPath:"JSON路徑",multiplier:"乘數",onValue:"ON值",mqttPowerHint:`JSON路徑從JSON負載中提取值（例如"power_l1"）。如果主題發布原始數值，請留空。
+ON值：表示"ON"的确切字符串。留空以自动检测（ON、true、1）。`,restControl:"控制",restOnUrl:"开启 URL",restOffUrl:"关闭 URL",restOnBody:"开启请求体",restOffBody:"关闭请求体",restMethod:"HTTP 方法",restHeaders:"Custom Headers (JSON)",restStatusUrl:"状态 URL",restStatusPath:"状态 JSON 路径",restStatusOnValue:"开启值",restPowerUrl:"功率URL",restPowerPath:"功率 JSON 路径",restPowerMultiplier:"功率乘数",restEnergyUrl:"能耗URL",restEnergyPath:"能耗 JSON 路径",restEnergyMultiplier:"能耗乘数",restUrlRequired:"REST 插座至少需要一个 URL（ON 或 OFF）",restHeadersHint:'例如 {"Authorization": "Bearer your-token"}',restBodyHint:'例如 ON, {"state": "on"}',restStatusHint:"轮询当前状态的 URL",restPathHint:"例如 state 或 data.power.status",restPowerUrlHint:"功率数据的独立URL（留空则使用状态URL）",restEnergyUrlHint:"能耗数据的独立URL（留空则使用状态URL）",restEnergyHint:"每个值可以使用独立的URL，或回退到状态URL。使用乘数进行单位转换（例如：0.001 将 Wh 转换为 kWh）。",testConnection:"测试连接",connectionSuccess:"连接成功",noSwitchesInSwitchbar:"开关栏中没有开关",enableSwitchbarHint:'在设置 > 智能插座中启用"在开关栏显示"'},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"电子邮件",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"SMTP 电子邮件通知",telegram:"通过 Telegram 机器人发送通知",discord:"通过 Webhook 发送到 Discord 频道",ntfy:"免费、可自托管的推送通知",pushover:"简单、可靠的推送通知",callmebot:"通过 CallMeBot 免费发送 WhatsApp 通知",webhook:"通用 HTTP POST 到任意 URL",homeassistant:"Home Assistant 仪表板中的持久通知"},lastSuccess:"上次：{{date}}",error:"错误",printer:"打印机：",allPrinters:"所有打印机",sendTestNotification:"发送测试通知",eventSettings:"事件设置",enabled:"已启用",sendFromProvider:"从此提供商发送通知",printEvents:"打印事件",printerStatus:"打印机状态",amsAlarms:"AMS 警报",amsHtAlarms:"AMS-HT 警报",printQueue:"打印队列",start:"开始",plateCheck:"热床检测",complete:"完成",failed:"失败",stopped:"已停止",progress:"进度",offline:"离线",lowFilament:"耗材不足",maintenance:"维护",amsHumidity:"AMS 湿度",amsTemp:"AMS 温度",amsHtHumidity:"AMS-HT 湿度",amsHtTemp:"AMS-HT 温度",bedCooled:"热床已冷却",firstLayer:"首层完成",quiet:"免打扰",digest:"摘要 {{time}}",printStarted:"打印已开始",plateNotEmpty:"热床非空",plateNotEmptyDescription:"打印前检测到物体",printCompleted:"打印已完成",bedCooledLabel:"热床已冷却",bedCooledDescription:"打印后热床温度降至阈值以下",firstLayerCompleteLabel:"首层打印完成",firstLayerCompleteDescription:"首层完成时发送带照片的通知",missingSpoolAssignmentLabel:"缺少料卷分配",missingSpoolAssignmentDescription:"当打印开始且所需料盘没有分配料卷时发送通知",printFailed:"打印失败",printStopped:"打印已停止",progressMilestones:"进度里程碑",progressMilestonesDescription:"在 25%、50%、75% 时通知",printerOffline:"打印机离线",printerError:"打印机错误",lowFilamentLabel:"耗材不足",maintenanceDue:"需要维护",maintenanceDueDescription:"需要维护时通知",amsHumidityHigh:"AMS 湿度过高",amsHumidityHighDescription:"普通 AMS 湿度超过阈值",amsTemperatureHigh:"AMS 温度过高",amsTemperatureHighDescription:"普通 AMS 温度超过阈值",amsHtHumidityHigh:"AMS-HT 湿度过高",amsHtHumidityHighDescription:"AMS-HT 湿度超过阈值",amsHtTemperatureHigh:"AMS-HT 温度过高",amsHtTemperatureHighDescription:"AMS-HT 温度超过阈值",inventoryAlerts:"库存警报",stockReorderAlert:"补货警报",stockReorderAlertDescription:"SKU 已达到补货点",stockBreakAlert:"断货警报",stockBreakAlertDescription:"库存将在补货到达前耗尽",jobAdded:"任务已添加",jobAddedDescription:"任务已添加到队列",jobAssigned:"任务已分配",jobAssignedDescription:"基于模型的任务已分配给打印机",jobStarted:"任务已开始",jobStartedDescription:"队列任务已开始打印",jobWaiting:"任务等待中",jobWaitingDescription:"任务正在等待耗材或打印机",jobSkipped:"任务已跳过",jobSkippedDescription:"任务已跳过（上一个失败）",jobFailed:"任务失败",jobFailedDescription:"任务启动失败",queueComplete:"队列已完成",queueCompleteDescription:"所有队列任务已完成",quietHours:"免打扰时段",noNotificationsDuring:"在此时段内不发送通知",editProviderToChangeQuietHours:"编辑提供商以更改免打扰时段",dailyDigest:"每日摘要",batchNotifications:"将通知汇总为每日摘要",sendAt:"发送于 {{time}}",editProviderToChangeDigestTime:"编辑提供商以更改摘要时间",edit:"编辑",deleteProvider:"删除通知提供商",deleteConfirm:'确定要删除"{{name}}"吗？此操作无法撤销。',delete:"删除",addTitle:"添加通知提供商",editTitle:"编辑通知提供商",nameLabel:"名称 *",namePlaceholder:"我的通知",providerTypeLabel:"提供商类型 *",configuration:"配置",testConfiguration:"测试配置",printerFilter:"打印机筛选",onlyFromPrinter:"仅发送来自此打印机的事件通知",quietHoursDnd:"免打扰时段",quietStart:"开始",quietEnd:"结束",dailyDigestLabel:"每日摘要",sendDigestAt:"发送摘要于",digestCollected:"事件将被收集并在此时间作为单条摘要发送",notificationEvents:"通知事件",progressPercent:"（25%、50%、75%）",bedCooledAfterPrint:"（打印完成后）",eventPriority:{sectionTitle:"ntfy 优先级",helpNtfy:"为每个已启用的事件选择优先级。ntfy 使用它来升级提醒（声音、可见性、推送行为）。此处未设置的级别将使用 ntfy 服务器默认值。",min:"最低",low:"低",default:"默认",high:"高",urgent:"紧急"},cancel:"取消",save:"保存",add:"添加",nameRequired:"名称为必填项",fieldRequired:"{{field}}为必填项",phoneNumber:"电话号码",apiKey:"API 密钥",serverUrl:"服务器 URL",topic:"主题",authToken:"认证令牌",userKey:"用户密钥",appToken:"应用令牌",priority:"优先级",botToken:"机器人令牌",chatId:"聊天 ID",smtpServer:"SMTP 服务器",smtpPort:"SMTP 端口",security:"安全",authentication:"认证",username:"用户名",password:"密码",fromEmail:"发件人邮箱",toEmail:"收件人邮箱",webhookUrl:"Webhook URL",payloadFormat:"负载格式",authorization:"授权",titleFieldName:"标题字段名",messageFieldName:"消息字段名",editTemplate:"编辑模板：{{name}}",titleLabel:"标题",bodyLabel:"正文",titlePlaceholder:"通知标题...",bodyPlaceholder:"通知正文...",availableVariables:"可用变量",clickToInsert:"点击插入到正文光标位置",livePreview:"实时预览",hide:"隐藏",show:"显示",loadingPreview:"加载预览中...",enterTemplateContent:"输入模板内容以查看预览",titlePreview:"标题：",bodyPreview:"正文：",resetToDefault:"恢复默认",titleRequired:"标题为必填项",bodyRequired:"正文为必填项",notificationLog:"通知日志",showFailedOnly:"仅显示失败",last24Hours:"最近 24 小时",last7Days:"最近 7 天",last30Days:"最近 30 天",last90Days:"最近 90 天",justNow:"刚刚",noFailedNotifications:"没有失败的通知",noNotificationsLogged:"没有通知记录",unknownProvider:"未知提供商",logTitle:"标题",logMessage:"消息",logError:"错误",logProvider:"提供商：{{type}}",logTime:"时间：{{time}}",refresh:"刷新",clearOld:"清除旧记录",statsSummary:"最近 {{days}} 天：",statsNotifications:"条通知",statsSent:"{{count}} 条已发送",statsFailed:"{{count}} 条失败",eventTypes:{print_start:"打印已开始",print_complete:"打印完成",print_failed:"打印失败",print_stopped:"打印已停止",print_progress:"进度",printer_offline:"打印机离线",printer_error:"打印机错误",filament_low:"耗材不足",maintenance_due:"需要维护",test:"测试"},userEmail:{title:"通知",emailNotifications:"邮件通知",emailNotificationsDesc:"接收您自己打印任务的邮件通知。邮件将通过高级身份验证中配置的 SMTP 设置发送。",sendingTo:"通知将发送至",noEmailWarning:"您的账户没有邮件地址。请联系管理员添加。",printJobNotifications:"打印任务通知",printJobNotificationsDesc:"选择哪些事件会触发您提交的打印任务的邮件通知。",printJobStarts:"打印任务开始",printJobStartsDesc:"当您的打印任务开始时收到通知。",printJobFinishes:"打印任务完成",printJobFinishesDesc:"当您的打印任务成功完成时收到通知。",printErrors:"打印错误",printErrorsDesc:"当您的打印任务失败或遇到错误时收到通知。",printJobStops:"打印任务停止",printJobStopsDesc:"当您的打印任务被取消或停止时收到通知。",saveSuccess:"通知偏好设置已保存。",saveError:"保存通知偏好设置失败。"}},richTextEditor:{bold:"粗体",italic:"斜体",underline:"下划线",bulletList:"无序列表",numberedList:"有序列表",alignLeft:"左对齐",alignCenter:"居中对齐",alignRight:"右对齐",addLink:"添加链接",removeLink:"移除链接"},externalLinks:{noLinksConfigured:"未配置外部链接",deleteLink:"删除链接",removeCustomIcon:"移除自定义图标",openInNewTab:"在新标签页中打开",placeholders:{linkName:"我的链接"}},keyboardShortcuts:{title:"键盘快捷键",navigation:"导航",archivesSection:"归档",kProfilesSection:"K 值配置",generalSection:"通用",shortcuts:{goToPrinters:"前往打印机",goToArchives:"前往归档",goToQueue:"前往队列",goToStats:"前往统计",goToProfiles:"前往云端配置",goToSettings:"前往设置",focusSearch:"聚焦搜索",openUploadModal:"打开上传对话框",clearSelection:"清除选择 / 取消焦点",contextMenu:"卡片右键菜单",refreshProfiles:"刷新配置",newProfile:"新建配置",exitSelectionMode:"退出选择模式",showHelp:"显示此帮助"},footer:"按 Esc 或点击外部关闭"},notificationLog:{title:"通知日志",events:{printStarted:"打印开始",printComplete:"打印完成",printFailed:"打印失败",printStopped:"打印停止",progress:"进度",printerOffline:"打印机离线",printerError:"打印机错误",lowFilament:"耗材不足",maintenanceDue:"维护到期",test:"测试"},timeAgo:{justNow:"刚刚",minutesAgo:"{{minutes}} 分钟前",hoursAgo:"{{hours}} 小时前"}},restoreBackup:{title:"恢复备份",restoring:"恢复中...",restoreComplete:"恢复完成",restoreFailed:"恢复失败",importSettings:"从备份文件导入设置",pleaseWait:"请稍候，正在恢复您的数据",clickToSelect:"点击选择备份文件（.json 或 .zip）",howDuplicateHandling:"重复处理方式：",categories:{printers:"打印机",smartPlugs:"智能插座",notificationProviders:"通知提供商",filaments:"耗材",archives:"归档",pendingUploads:"待处理上传",settingsTemplates:"设置和模板"},matchingInfo:{printers:"按序列号匹配",smartPlugs:"按 IP 地址匹配",notificationProviders:"按名称匹配",filaments:"按名称 + 类型 + 品牌匹配",archives:"按内容哈希匹配",pendingUploads:"按文件名匹配",settingsTemplates:"始终覆盖"},replaceExisting:"替换现有数据",keepExisting:"保留现有数据",replaceDescription:"用备份数据覆盖已存在的项目",keepDescription:"仅恢复不存在的项目",caution:"注意：",cautionText:"覆盖将用备份数据替换您当前的配置。出于安全考虑，打印机访问码永远不会被覆盖。",itemsRestored:"已恢复项目",itemsSkipped:"已跳过项目",restored:"已恢复",skipped:"已跳过（已存在）",filesLabel:"文件（3MF、缩略图等）",newApiKeysGenerated:"已生成新 API 密钥",newApiKeysWarning:"这些密钥仅显示一次。请立即复制！",processingBackup:"处理备份文件中...",noDataFound:"备份文件中未找到可恢复的数据。",failedToRestore:"恢复备份失败。请检查文件格式。"},backupExport:{title:"导出备份",selectData:"选择要包含的数据",selectAll:"全选",selectNone:"全不选",categoryDescriptions:{settings:"语言、主题、更新偏好",notifications:"ntfy、Pushover、Discord 等",templates:"自定义消息模板",smartPlugs:"Tasmota 插座配置",externalLinks:"侧边栏外部服务链接",printers:"打印机信息（不含访问码）",plateDetection:"空打印板参考图像",filaments:"耗材类型和成本",maintenance:"自定义维护计划",archives:"所有打印数据 + 文件（3MF、缩略图、照片）",projects:"项目、材料清单和附件",pendingUploads:"虚拟打印机待审核的上传",apiKeys:"Webhook API 密钥（导入时生成新密钥）"},requiresPrinters:"需要选择打印机",zipFileWarning:"将创建 ZIP 文件。",zipFileDescription:"包括所有 3MF 文件、缩略图、延时摄影和照片。这可能需要一些时间并生成较大的文件。",includeAccessCodes:"包含访问码",includeAccessCodesDescription:"用于转移到另一台机器",includeAccessCodesWarning:"访问码将以明文形式包含。请妥善保管此备份文件！",categoriesSelected:"已选择 {{selectedCount}} 个类别"},pendingUploads:{placeholders:{notes:"添加关于此打印的备注..."},discardUpload:"丢弃上传",archiveAllUploads:"归档所有上传",discardAllUploads:"丢弃所有上传",archive:"归档",timeAgo:{justNow:"刚刚",minutesAgo:"{{minutes}} 分钟前",hoursAgo:"{{hours}} 小时前",daysAgo:"{{days}} 天前"}},apiBrowser:{placeholders:{requestBody:"JSON 请求体...",searchEndpoints:"搜索端点..."}},configureAmsSlot:{title:"配置 AMS 槽位",slotConfigured:"槽位已配置！",configuringSlot:"正在配置槽位：",slotLabel:"{{ams}} 槽位 {{slot}}",searchPresets:"搜索预设...",colorPlaceholder:"颜色名称或十六进制（例如：棕色、FF8800）",clearCustomColor:"清除自定义颜色",noCloudPresets:"无云端预设。登录拓竹云以同步。",noPresetsAvailable:"无可用预设。登录拓竹云或导入本地配置。",noMatchingPresets:"未找到匹配的预设。",custom:"自定义",builtin:"内置",settingsSentToPrinter:"设置已发送到打印机",filamentProfile:"耗材配置",kProfileLabel:"K 值配置（压力推进）",filteringFor:"筛选：{{material}}",noKProfile:"无 K 值配置（使用默认值 0.020）",noMatchingKProfiles:"未找到匹配的 K 值配置。将使用默认 K=0.020。",selectFilamentFirst:"请先选择耗材配置",kFromCalibration:"K={{value}}（来自打印机校准）",customColorLabel:"自定义颜色（可选）",presetColors:"{{name}} 颜色：",showLessColors:"显示更少颜色",showMoreColors:"显示更多颜色",clear:"清除",hexLabel:"十六进制：#{{hex}}",resetting:"重置中...",resetSlot:"重置槽位",cancel:"取消",configuring:"配置中...",configureSlot:"配置槽位"},githubBackup:{title:"Git 备份",history:"历史",downloadBackup:"下载备份",restoreBackup:"恢复备份",noBackupsYet:"暂无备份"},emailSettings:{placeholders:{fromName:"Bambuddy"}},tagManagement:{searchTags:"搜索标签...",renameTag:"重命名标签",deleteTag:"删除标签"},notificationTemplates:{placeholders:{title:"通知标题...",body:"通知正文..."}},batchTag:{placeholders:{newTag:"输入新标签..."}},photoGallery:{deletePhoto:"删除照片"},filamentHoverCard:{copySpoolUuid:"复制耗材 UUID"},kProfilesView:{hasNote:"有备注",copyProfile:"复制配置"},layout:{openMenu:"打开菜单",noPermissionSystemInfo:"您没有查看系统信息的权限"},dashboard:{dragToReorder:"拖动以重新排列",hideWidget:"隐藏小部件"},notificationProviderCard:{deleteNotificationProvider:"删除通知提供商"},fileManagerModal:{closeFileManager:"关闭文件管理器",sortFiles:"排序文件",goToParentFolder:"返回上级文件夹",threeView:"3D 视图"},embeddedCameraViewer:{refreshStream:"刷新流",close:"关闭",zoomOut:"缩小",resetZoom:"重置缩放",zoomIn:"放大",dragToResize:"拖动调整大小"},timelapseViewer:{skipBack5s:"后退 5 秒",skipForward5s:"前进 5 秒"},notificationProviders:{descriptions:{email:"SMTP 邮件通知",telegram:"通过 Telegram 机器人通知",discord:"通过 Webhook 发送到 Discord 频道",ntfy:"免费、可自托管的推送通知",pushover:"简单、可靠的推送通知",callmebot:"通过 CallMeBot 的免费 WhatsApp 通知",webhook:"通用 HTTP POST 到任意 URL"}},logViewer:{searchPlaceholder:"搜索消息或日志名称...",noLogEntries:"未找到日志条目"},switchbarPopover:{noSwitchesInSwitchbar:"切换栏中没有开关"},projectPageModal:{placeholders:{title:"标题",designer:"设计师",license:"许可证",description:"输入描述...",profileTitle:"配置标题",profileDescription:"配置描述..."}},spoolmanSettings:{},time:{unknown:"-",waiting:"等待中",justNow:"刚刚",now:"现在",minsAgo:"{{count}} 分钟前",inMins:"{{count}} 分钟后",hoursAgo:"{{count}} 小时前",inHours:"{{count}} 小时后",daysAgo:"{{count}} 天前",inDays:"{{count}} 天后"},spoolbuddy:{nav:{dashboard:"仪表板",ams:"AMS",inventory:"库存",writeTag:"写入",settings:"设置"},status:{nfcReady:"NFC 就绪",nfcOff:"NFC 关闭",offline:"离线",online:"在线",noPrinters:"无打印机",deviceOffline:"设备离线",waitingConnection:"等待设备连接...",systemReady:"系统就绪",status:"状态"},dashboard:{readyToScan:"准备扫描",idleMessage:"将耗材放在秤上以识别",nfcHint:"NFC 标签将自动读取",device:"设备",syncWeight:"同步重量",weightSynced:"已同步！",unknownTag:"未知标签",newTag:"检测到新标签",onScale:"在秤上",linkSpool:"链接到耗材",linkTagTitle:"将标签链接到耗材",linkTag:"链接标签",selectSpool:"选择要链接此标签的耗材：",noUntagged:"未找到没有标签的耗材",tagDetected:"检测到标签",noTag:"无标签",tagId:"标签",grossWeight:"毛重",spoolSize:"耗材盘尺寸",close:"关闭",currentSpool:"当前耗材",plateReady:"热床就绪: {{name}}",plateReadyLabel:"待清理的热床",plateClearAction:"清理",plateClearedToast:"已将热床标记为已清理",plateClearFailed:"无法将热床标记为已清理"},modal:{spoolDetected:"检测到耗材",assignToAms:"分配到 AMS",syncWeight:"同步重量",weightSynced:"已同步！",syncing:"同步中...",newTagDetected:"检测到新标签",addToInventory:"添加到库存",assignToAmsTitle:"分配到 AMS",selectSlot:"选择槽位",assign:"分配",assigning:"分配中...",assignSuccess:"已分配！",assignPendingInsert:"已分配。插入耗材后将配置槽位。",assignError:"分配耗材失败。请重试。",noPrinterSelected:"选择打印机...",noAmsDetected:"此打印机未检测到 AMS",slot:"槽位"},weight:{noReading:"无读数",stable:"稳定",measuring:"测量中...",tare:"去皮",calibrate:"校准"},spool:{remaining:"剩余",material:"材料",brand:"品牌",color:"颜色",coreWeight:"空盘",labelWeight:"标签",scaleWeight:"秤重",netWeight:"净重",lastUsed:"上次使用"},ams:{noData:"未检测到 AMS",connectAms:"连接 AMS 以查看耗材槽位",noPrinter:"未选择打印机",selectPrinter:"从顶部栏选择打印机",printerDisconnected:"打印机已断开",humidity:"湿度",level:"余量",active:"活跃",slot:"槽位",empty:"空"},inventory:{search:"搜索耗材...",empty:"库存中没有耗材",noResults:"没有匹配的耗材",spools:"个耗材",addSpool:"添加耗材"},settings:{tabDevice:"设备",tabDisplay:"显示",tabScale:"秤",tabUpdates:"更新",nfcReader:"NFC 读卡器",type:"类型",connection:"连接",notConnected:"不适用",deviceInfo:"设备信息",hostname:"主机",uptime:"运行时间",systemConfig:"后端与认证",backendUrl:"Bambuddy 后端 URL",apiToken:"API 令牌",apiTokenPlaceholder:"输入 API 令牌",saveConfig:"保存配置",systemQueued:"配置已加入队列。",nfcDiagnostic:"NFC 诊断",scaleDiagnostic:"秤诊断",readTagDiagnostic:"读取标签诊断",testNfc:"测试读卡器",testScale:"测试精度",testReadTag:"读取标签",systemFieldsRequired:"后端 URL 为必填项。",brightness:"亮度",saved:"已保存",noBacklight:"未检测到 DSI 背光。亮度控制需要 DSI 显示屏。",screenBlank:"屏幕熄灭超时",screenBlankDesc:"不活动后屏幕关闭。触摸唤醒。",displayNote:"亮度作为软件滤镜应用。",scaleCalibration:"秤校准",currentWeight:"当前重量",tareOffset:"去皮",calFactor:"系数",knownWeight:"已知重量",calStep1:"移除秤上所有物品并按设置零点。",calStep2:"将已知重量放在秤上。",setZero:"设置零点",calibrateNow:"校准",calibrated:"已校准",tareSet:"去皮命令已发送。等待设备响应...",tareComplete:"去皮完成！",tareTimedOut:"去皮超时 — SpoolBuddy 守护进程是否正在运行？",tareFailed:"发送去皮命令失败",zeroSet:"零点已设置。将已知重量放在秤上。",calibrationDone:"校准完成！",calibrationFailed:"校准失败",lastCalibrated:"上次校准",stable:"稳定",settling:"稳定中...",firmware:"固件",scale:"秤",noDevice:"未找到 SpoolBuddy 设备",daemonVersion:"守护进程版本",currentVersion:"当前",versionPending:"等待守护进程...",checking:"检查中...",checkUpdates:"检查更新",updateAvailable:"有可用更新",updateInstructions:"通过 SSH 更新：运行 SpoolBuddy 安装脚本进行升级。",upToDate:"已是最新",includeBeta:"包含测试版本"},writeTag:{tabExisting:"现有耗材",tabNew:"新耗材",tabReplace:"替换标签",searchPlaceholder:"按材料、颜色、品牌搜索...",noUntaggedSpools:"没有无标签的耗材",noTaggedSpools:"没有有标签的耗材",selectSpool:"选择一个耗材，然后将空白 NTAG 放在读卡器上",placeTag:"将 NTAG 放在读卡器上",tagReady:"检测到标签 — 准备写入",writeTag:"写入标签",replaceTag:"替换标签",writing:"写入标签中...",waiting:"等待 SpoolBuddy...",writeSuccess:"标签写入成功！",writeFailed:"写入失败",queueFailed:"排队写入命令失败",tryAgain:"重试",cancel:"取消",replaceWarning:"旧标签将被取消链接。新标签将替换它。",deviceOffline:"SpoolBuddy 离线",material:"材料",colorName:"颜色名称",color:"颜色",brand:"品牌",weight:"重量 (g)",createSpool:"创建耗材",creating:"创建中...",spoolCreated:"耗材已创建！准备写入。",createFailed:"创建耗材失败",incompleteDataWarning:"已使用不完整的Spoolman数据写入标签"},quickMenu:{printerPower:"打印机电源",systemControls:"系统",restartDaemon:"重启守护进程",restartBrowser:"重启浏览器",reboot:"重启",shutdown:"关机",swipeToClose:"向下滑动关闭",confirmTitle:"确认",confirmShutdown:"确定要关闭SpoolBuddy吗？您需要物理访问才能重新开启。",confirmReboot:"确定要重启SpoolBuddy吗？",confirmRestartDaemon:"重启SpoolBuddy守护进程？NFC和秤将暂时不可用。",confirmRestartBrowser:"重启kiosk浏览器？屏幕将短暂变黑。",confirm:"确认",confirmPlugOn:"开启 {{name}}？",confirmPlugOff:"关闭 {{name}}？",turnOn:"开启",turnOff:"关闭"}},diagnostic:{modalTitle:"连接诊断 — {{name}}",running:"正在运行诊断...",runningElapsed:"正在运行诊断... ({{elapsed}}秒)",waitingForReportHint:"正在等待打印机发布状态报告 — 最长可能需要 {{max}} 秒。",runFailed:"无法运行诊断：{{error}}",retry:"重新运行",runButton:"运行诊断",sectionTitle:"连接诊断",sectionDescription:"检查打印机无法连接或无法打印的原因 — 端口可达性、LAN 开发者模式、Docker 网络模式和凭据。",noPrinters:"未配置打印机。",overall:{ok:"未发现问题 — 打印机连接看起来正常。",warnings:"打印机应该可以工作，但有些事项需要注意。",problems:"发现了可解释打印机无法连接或无法打印的问题。"},check:{port_mqtt:{title:"控制端口（MQTT 8883）",pass:"可达 — 打印机正在接受控制连接。",fail:"端口 8883 不可达。打印机已关机、IP 地址不同，或被防火墙阻止。请核实打印机 IP，并确保没有任何东西阻止端口 8883。"},port_ftps:{title:"文件传输端口（FTPS 990）",pass:"可达 — 发送打印文件将正常工作。",warn:"端口 990 不可达。监控可能仍然有效，但向打印机发送打印任务将失败。请确保端口 990 未被阻止。"},port_rtsps:{title:"摄像头端口（RTSPS 322）",pass:"可达 — 摄像头视频流将正常工作。",warn:"端口 322 不可达。实时摄像头视图将无法工作。这不影响打印。"},network_mode:{title:"Docker 网络模式",pass:"正在以 host 网络模式运行。",warn:'Bambuddy 正在以 Docker bridge 网络运行。打印机发现和虚拟打印机需要 host 网络模式 — 请使用 "network_mode: host" 重新创建容器。',skip:"未在 Docker 中运行 — 不适用。"},subnet:{title:"网络子网",pass:"打印机和 Bambuddy 位于同一子网。",warn:"打印机（{{printer_ip}}）和 Bambuddy（{{host_ip}}）位于不同的子网。除非配置了子网之间的路由，否则它们可能无法相互访问。",skip:"无法确定子网 — 已跳过。"},mqtt_auth:{title:"打印机凭据",pass:"打印机已接受连接。",fail:"打印机可达，但拒绝了连接。访问代码或序列号很可能有误。每次切换开发者模式时访问代码都会更改 — 请从打印机屏幕重新复制。",skip:"未检查 — 无法连接到打印机。"},developer_mode:{title:"LAN 开发者模式",pass:"开发者模式已启用。",fail:"打印机上的开发者模式已关闭。请在打印机的 LAN 设置中启用它 — 并按 OK 确认。否则打印将无法开始。",skip:"无法检查 — 需要与打印机的实时连接。"},printer_publishing:{title:"打印机正在发布状态",pass:"打印机正在发布状态更新 — AMS、耗材和 K 配置将正确镜像到切片软件。",fail:"MQTT 代理已接受连接，但打印机未发布任何状态报告。这几乎总是因为序列号错误或大小写不一致 — device/<serial>/report 主题区分大小写。请将打印机设置中的序列号与打印机屏幕上的显示进行核对。",skip:"无法检查 — 需要与打印机的实时连接。"}}},systemHealth:{sectionTitle:"系统健康",sectionDescription:"扫描最近的日志以发现已知问题，在它们演变成支持工单之前，通常你可以自行解决。",rescan:"重新扫描",clean:"在最近 {{times}} 条日志中未发现已知问题。",logUnavailable:"文件日志记录已禁用，因此无法扫描日志。请启用文件日志以使用此检查。",learnMore:"如何解决",fixLabel:"解决方法：",occurrences:"出现 {{times}} 次 — 最近一次 {{lastSeen}}",category:{layer8:"你可以自行解决",environment:"环境",bug:"请反馈此问题"},signature:{"ftp-auth-rejected":{name:"打印机拒绝了访问码",cause:"打印机拒绝了文件传输登录。访问码错误，或在切换开发者模式后已更改。",fix:"从打印机屏幕（局域网设置）重新复制访问码，并在 Bambuddy 的打印机设置中更新它。"},"ftp-connection-timeout":{name:"文件传输连接超时",cause:"Bambuddy 无法连接打印机的文件传输端口（FTPS 990）。该端口被阻止，或打印机已关机或位于其他子网。",fix:"请确保 Bambuddy 与打印机之间的 990 端口未被阻止，并且两者位于同一网络。"},"ftp-ssl-error":{name:"安全文件传输握手失败",cause:"与打印机文件传输服务器的 TLS 握手失败。通常是防火墙或打印机固件过旧所致。",fix:"请更新打印机固件，并检查没有防火墙或代理拦截 990 端口上的连接。"},"mqtt-connection-flapping":{name:"打印机连接反复断开",cause:"控制连接（MQTT 8883）反复断开并重连——通常是网络信号弱或端口被部分阻止所致。",fix:"请检查打印机附近的 Wi-Fi 信号，尽量使用有线连接，并确保 8883 端口能够稳定连接。"},"camera-connection-refused":{name:"无法访问摄像头视频流",cause:"无法在 RTSPS 322 端口连接实时摄像头。该端口被阻止，或打印机上的摄像头或局域网实时画面已关闭。",fix:"请在打印机上启用摄像头和局域网实时画面，并确保 322 端口未被阻止。这不会影响打印。"},"database-locked":{name:"数据库写入冲突",cause:'在负载下 SQLite 数据库出现 "database is locked" 错误——同时使用多台打印机时较为常见。',fix:"请将 Bambuddy 切换到外部 PostgreSQL 数据库。参见文档中的 PostgreSQL 指南。"}}},vpDiagnostic:{title:"设置检查 — {{name}}",runButton:"运行设置检查",running:"正在运行设置检查...",runFailed:"无法运行设置检查：{{error}}",retry:"重新运行",overall:{ok:"所有检查均已通过 — 此虚拟打印机已正确设置。",warnings:"虚拟打印机应该可以工作，但有些方面需要注意。",problems:"发现的问题可以解释切片软件为何无法看到或使用此虚拟打印机。"},check:{enabled:{title:"虚拟打印机已启用",fail:"此虚拟打印机已关闭。请将其打开以使其可被发现。"},running:{title:"服务正在运行",fail:"虚拟打印机已启用，但其服务未运行。请检查 Bambuddy 日志 — 通常是绑定 IP 冲突或权限错误使其停止。"},bind_interface:{title:"绑定网络接口",fail:'绑定接口未设置，或在此主机上已不存在。请在"绑定接口"下拉菜单中选择一个当前的接口。'},access_code:{title:"已设置访问码",fail:"未设置访问码。必须向切片软件提供与您在此处设置的相同的 8 位访问码。"},target_printer:{title:"目标打印机",fail:"未选择目标打印机。代理模式需要一台实际的打印机进行转发。",warn:"目标打印机当前处于离线状态 — 重新连接后将恢复转发。"},port_ftps:{title:"文件上传服务（端口 {{port}}）",fail:"绑定 IP 的端口 {{port}} 上没有任何监听，因此切片软件无法上传文件。通常是此接口上的端口冲突所致。"},port_mqtt:{title:"控制服务（端口 {{port}}）",fail:"绑定 IP 的端口 {{port}} 上没有任何监听，因此切片软件无法连接或显示状态。"},port_bind:{title:"发现服务（端口 {{port}}）",fail:"绑定 IP 的端口 {{port}} 上没有任何监听，因此切片软件的发现握手会失败。"},certificate:{title:"TLS 证书",pass:"证书已就绪。请确保已将 Bambuddy CA 证书（上方）导入切片软件的信任库。",fail:"此虚拟打印机的 TLS 证书缺失。请检查 Bambuddy 数据目录是否可写。"}}},bugReport:{logHealthSummary:"在你的日志中发现了已知问题",logHealthIntro:"最近的日志与已知问题相符。请查看下方的解决方法——解决它们可能无需提交错误报告即可解决你的问题。你仍然可以在下方提交报告。",title:"报告错误",description:"描述",descriptionPlaceholder:"出了什么问题？请描述问题...",email:"邮箱（可选）",emailPlaceholder:"your@email.com",emailPrivacy:"如果提供，您的邮箱将包含在GitHub Issue的折叠部分中，以便维护者后续跟进。",screenshot:"截图",uploadOrPaste:"上传、粘贴或拖拽图片",dataCollectedSummary:"报告中包含哪些数据？",dataIncluded:"包含：",dataIncludedList:"应用版本、操作系统、架构、Python版本、数据库统计（仅计数）、打印机型号、喷嘴数量、固件版本、连接状态、集成状态（Spoolman、MQTT、HA）、非敏感设置、网络接口数量、Docker详情、依赖版本。",dataNeverIncluded:"绝不包含：",dataNeverIncludedList:"打印机名称、序列号、访问代码、密码、IP地址、邮箱地址、API密钥、令牌、Webhook URL、主机名或用户名。",submit:"提交",startLogging:"开始调试日志",stepEnableLogging:"调试日志已启用",stepReproduce:"请现在重现问题",stepStopLogging:"停止并提交报告",stopAndSubmit:"停止并提交",maxDuration:"{{minutes}}分钟后自动停止",stoppingLogs:"正在收集日志并提交...",submitting:"正在提交错误报告...",submittingStepConnection:"正在执行打印机连接性检查",submittingStepVirtualPrinters:"正在执行虚拟打印机设置检查",submittingStepLogScan:"正在扫描最近的日志以查找已知问题",submittingStepSubmit:"正在将报告提交至 GitHub",submitSuccess:"错误报告提交成功！",submitFailed:"提交错误报告失败",diagnosticChecking:"正在检查打印机连接...",diagnosticHealthy:"连接检查通过 — 未在您的打印机上发现问题。",diagnosticSummary:"{{total}} 台打印机中有 {{problems}} 台存在连接问题",diagnosticIntro:"一台或多台打印机存在连接问题，可能正是您遇到问题的原因。请展开下方的打印机查看解决方法 — 解决它也许无需提交错误报告即可解决问题。您仍然可以在下方提交报告。",thankYou:"谢谢！",submitted:"您的错误报告已提交。",viewIssue:"查看Issue",unexpectedError:"发生了意外错误"},failureDetection:{title:"AI 故障检测",description:"通过自托管的 Obico ML API 监控打印,并对检测到的故障自动采取行动。",mlUrl:"Obico ML API 地址",mlUrlHint:"您自托管的 Obico ml_api 容器的基础 URL(例如 http://192.168.1.10:3333)。",test:"测试",testSuccess:"ML API 可访问且正常。",testFailed:"无法访问 ML API。",sensitivity:"灵敏度",sensitivityLow:"低(减少误报)",sensitivityMedium:"中(平衡)",sensitivityHigh:"高(更早检测,更多误报)",sensitivityHint:"调整触发警告和故障的置信度阈值。",action:"检测到故障时的操作",actionNotify:"仅通知",actionPause:"暂停打印",actionPauseOff:"暂停并切断电源",pollInterval:"检查间隔(秒)",pollIntervalHint:"打印过程中每台打印机的检查频率。最小 5 秒,最大 120 秒。",externalUrlMissing:"未设置外部 URL。",externalUrlHint:"ML API 通过 URL 获取摄像头快照。请在通用设置中设置外部 URL，以便 ML API 容器可以访问 Bambuddy。",perPrinterTitle:"监控的打印机",perPrinterHint:"选择检测服务要监视哪些打印机。",monitorAll:"监控所有已连接的打印机",statusTitle:"状态",serviceRunning:"服务运行中",thresholds:"低 / 高阈值",activePrinters:"活动打印",noActivePrints:"当前没有正在进行的打印。",historyTitle:"最近检测",noHistory:"暂无检测记录。"},makerworld:{title:"MakerWorld",description:"粘贴 MakerWorld 模型链接，即可直接在 Bambuddy 中导入并打印 —— 无需切换到 Bambu Handy 应用。",pasteUrlHeader:"从 MakerWorld 导入",pasteUrlPlaceholder:"https://makerworld.com/en/models/… 或粘贴任意 MakerWorld 链接",resolveButton:"解析",signInRequiredTitle:"下载需要登录 Bambu Cloud",signInRequiredBody:"您可以匿名浏览模型详情，但下载 3MF 文件需要 Bambu Cloud 账户。",openCloudSettings:"打开云设置",untitledModel:"无标题模型",byCreator:"作者: {{name}}",downloadsCount:"{{count}} 次下载",licensePrefix:"许可协议",alreadyImported:"已在资料库中",openOnMakerworld:"在 MakerWorld 中打开",alreadyInLibrary:"此模型已在您的资料库中 —— 可在文件管理器 → MakerWorld 中找到",importSuccess:"已导入 {{filename}} —— 已保存到文件管理器 → MakerWorld",platesHeader:"打印板 ({{count}})",plateDefaultName:"打印板 {{n}}",materialCount:"{{count}} 种耗材",amsRequired:"需要 AMS",slicedFor:"为 {{printer}} 切片",alsoCompatible:"还标记为兼容：{{printers}}",importToLibrary:"保存",sliceIn:"保存并在 {{slicer}} 中切片",disclaimer:"MakerWorld 集成使用由社区记录的 API 接口。Bambuddy 与 MakerWorld 或 Bambu Lab 没有从属或认可关系。",lastImportSuccess:"已导入到您的资料库",lastImportAlreadyInLibrary:"已存在于您的资料库中",viewInLibrary:"在文件管理器中查看",openInBambuStudio:"在 Bambu Studio 中打开",openInOrcaSlicer:"在 OrcaSlicer 中打开",importTo:"导入到文件管理器",recentImportsHeader:"最近导入",phaseResolving:"解析中",phaseDownloading:"下载中",folderAuto:"MakerWorld (默认)",importAll:"全部导入",importAllProgress:"正在导入 {{current}}/{{total}}",openGallery:"打开图片库",galleryPrev:"上一张",galleryNext:"下一张",deleteImport:"从资料库中移除",importDeleting:"正在移除…",importDeleted:"已从资料库中移除",confirmDelete:"从资料库中移除 {{filename}}？本地文件将被删除，但可以从 MakerWorld 重新导入。",errors:{resolveFailed:"无法解析该 MakerWorld 链接。",downloadFailed:"下载失败。请重试。",deleteFailed:"无法从资料库中移除文件。"}},gcodeViewer:{back:"返回",backToArchives:"返回打印归档",backToFiles:"返回文件管理器"},libraryTrash:{title:"回收站",headerButton:"回收站",headerTooltip:"查看已移至回收站的文件",backToFiles:"返回文件管理器",subtitleAdmin:"已删除的文件会在回收站保留 {{days}} 天，之后自动删除。此视图显示所有用户的回收站。",subtitleUser:"已删除的文件会在回收站保留 {{days}} 天，之后自动删除。",loading:"正在加载回收站…",loadError:"无法加载回收站。",empty:"回收站为空。",summary:"{{count}} 个文件 · {{size}}",emptyTrash:"清空回收站",restore:"还原",purgeNow:"立即删除",autoPurgeIn:"将于 {{when}} 自动删除",days:"天",retentionLabel:"自动删除时间",selectAll:"全选",selectOne:"选择 {{filename}}",selectionCount:"已选择 {{count}} 项",bulkRestore:"还原所选",bulkPurge:"删除所选",col:{filename:"文件",folder:"文件夹",size:"大小",deleted:"移入回收站",autoPurge:"自动删除",owner:"所有者",actions:"操作"},confirm:{purgeTitle:"永久删除？",purgeBody:"{{filename}} 将从磁盘中删除，无法恢复。",emptyTitle:"清空回收站？",emptyBody:"全部 {{count}} 个文件将从磁盘中删除。此操作无法撤消。",bulkPurgeTitle:"永久删除所选文件？",bulkPurgeBody:"所选的 {{count}} 个文件将从磁盘中删除，无法恢复。",cta:"永久删除"},toast:{restored:"文件已还原。",restoreFailed:"无法还原文件。",purged:"文件已永久删除。",purgeFailed:"无法删除文件。",emptied:"已从回收站删除 {{count}} 个文件。",emptyFailed:"无法清空回收站。",retentionSaved:"自动删除已设置为 {{days}} 天。",retentionFailed:"无法保存保留设置。",bulkRestored:"已还原 {{count}} 个文件。",bulkPurged:"已删除 {{count}} 个文件。"}},libraryPurge:{title:"清理旧文件",headerButton:"清理旧文件",headerTooltip:"批量将旧文件移至回收站",description:"早于所选阈值的文件将被移至回收站。外部文件夹会被跳过。在自动删除之前，您可以从回收站还原文件。",ageLabel:"移动早于以下天数的文件",days:"天",includeNeverPrinted:"包括从未打印过的文件",effectsTitle:"点击清除时会发生什么",effect1:"匹配的文件移至回收站 — 尚未从磁盘删除。",effect2:"在保留期到期之前，您可以随时从回收站恢复。",effect3:"保留期满后，回收站清理器将它们从磁盘永久删除。",effect4:"外部（链接）文件夹中的文件将被跳过 — Bambuddy 从不删除不属于自己的字节。",previewLoading:"正在检查匹配的文件数量…",previewFailed:"无法预览清理结果。",previewSummary:"{{count}} 个文件 · {{size}} 将被移至回收站",andMore:"…还有 {{count}} 个",warning:"文件将被软删除——在保留期结束前，您可以从回收站还原它们。",confirmCta:"将 {{count}} 个移至回收站",purging:"正在移至回收站…",toast:{success:"已将 {{count}} 个文件移至回收站。",failed:"无法清理文件。"}},libraryAutoPurge:{enableLabel:"自动清理旧文件",enableDescription:"每天执行一次管理员清理。文件会先进入回收站——不会立即删除。",ageLabel:"自动清理早于以下天数的文件",ageDescription:"最少 7 天，最多 10 年。使用与手动「清理旧文件」按钮相同的时间规则。",days:"天",includeNeverPrinted:"包括从未打印过的文件",saveFailed:"无法保存自动清理设置。"},archivePurge:{headerButton:"清除旧条目",headerTooltip:"批量删除旧归档",title:"清除旧归档",description:"清除旧的打印历史。每个归档按其最近一次打印完成时间老化 — 重新打印归档会刷新其年龄，因此活跃工作永远不会被清除。",ageLabel:"删除最近未打印的归档：",days:"天",effectsTitle:"点击清除时会发生什么",effect1:"每个匹配的归档将从列表中隐藏，其磁盘文件（3MF、缩略图、延时摄影、源 3MF、F3D、照片）也将被删除。",effect2:"数据库中的归档记录将被保留，因此 Quick Stats 仍可计入耗材、时间、成本和能耗的贡献 — 与单条删除的默认行为一致。",effect3:'勾选下方"同时从统计中移除"可一并清除 Quick Stats 中的贡献（与单条删除选项等同）。该操作不可撤销。',effect4:"重新打印归档会刷新其使用计时器，因此仍在使用的归档不会被清除。",purgeStatsLabel:"同时从统计中移除",purgeStatsHint:"从 Quick Stats（耗材、时间、成本、能耗）中移除匹配的归档。不勾选时，Quick Stats 保留所有贡献，仅文件从磁盘删除。",previewLoading:"检查匹配的归档数量…",previewFailed:"无法预览清除。",previewSummary:"将移除 {{count}} 个归档 · {{size}}",andMore:"…还有 {{count}} 个",warning:"文件将从磁盘删除且无法恢复。继续前请下载或收藏您想保留的内容。",confirmCta:"移除 {{count}} 个归档",purging:"移除中…",toast:{success:"已移除 {{count}} 个归档。",failed:"无法清除归档。"}},archiveAutoPurge:{enableLabel:"自动清除旧归档",enableDescription:"每天一次，将阈值内未打印的归档从列表中隐藏，并从磁盘中删除其文件。重新打印会重置计时器。",ageLabel:"自动删除最近未打印的归档：",ageDescription:"最少 7 天，最多 10 年。基于最近一次打印完成 — 重新打印会刷新年龄。删除 3MF、缩略图、延时摄影、源 3MF、F3D 和照片。",days:"天",purgeStatsLabel:"同时从统计中移除",purgeStatsDescription:"启用后，每日清理任务还会将每个被清除的归档从 Quick Stats（耗材、时间、成本、能耗）中移除。默认关闭 — Quick Stats 保留贡献，仅文件从磁盘删除。",runNow:"立即清除归档",saveFailed:"无法保存自动清除设置。"},cameraTokens:{title:"摄像头 API 令牌",navTitle:"摄像头 API 令牌",description:"长期令牌，用于将摄像头流嵌入 Home Assistant、Frigate、信息亭或其他需要稳定 URL 的工具。每个令牌仅限摄像头流，可随时撤销。",loading:"加载中…",confirmRevoke:{title:"撤销此令牌？",body:"使用「{{name}}」的任何设备将立即失去访问权限。此操作无法撤销。",cancel:"取消",confirm:"撤销"},create:{title:"创建新令牌",nameLabel:"令牌名称",namePlaceholder:"例如 Home Assistant",daysLabel:"过期天数",submit:"创建",hint:"最大有效期 365 天。令牌值仅在创建时显示一次 — 请立即复制。"},created:{title:"令牌已创建 — 立即复制",warning:"这是此令牌唯一一次可见。关闭此对话框后您将无法再次查看。",copy:"复制",dismiss:"我已保存"},list:{myTitle:"我的令牌",allTitle:"所有用户（管理员视图）",empty:"暂无令牌。",name:"名称",owner:"所有者",prefix:"前缀",created:"创建时间",expires:"过期时间",lastUsed:"最近使用",revoke:"撤销",expired:"已过期"},toast:{created:"令牌已创建",createFailed:"创建令牌失败",revoked:"令牌已撤销",revokeFailed:"撤销令牌失败",loadFailed:"加载令牌失败",copied:"已复制到剪贴板",copyFailed:"复制失败 — 手动选择并复制"}},forecast:{title:"库存预测",noSpools:"未找到活跃的料卷。请将料卷添加到库存中以查看预测数据。",noUsageData:"无可用使用数据 — 无法预测库存时间线。",sku:"SKU",material:"材料",stock:"库存",dailyRate:"消耗率",daysLeft:"剩余天数",emptyBy:"耗尽日期",reorderBy:"补货截止日",actions:"操作",trend:"趋势",estimated:"估算",noData:"无数据",timeframe:"时间范围",chartTitle:"库存预测 — 前5种材料",dashedLinesROP:"虚线 = 再订货点",stockLevel:"库存量",reorderPoint:"再订购点",safetyMargin:"安全余量",trendLegend:"趋势（基于历史，95%服务水平）",estimatedLegend:"估算（重量差值）",noDataLegend:"无数据",ropLabel:"再订货点",ssLabel:"安全库存",safetyStockLegend:"安全库存",stockArrivalLegend:"到货",stockoutLegend:"断货",alertCount_one:"{{count}}条警告",alertCount_other:"{{count}}条警告",order:"订购",globalLeadTime:"全局交货期",globalLeadTimeHint:"全局交货期下限 — 用于所有 SKU 的再订购点计算",save:"保存",cancel:"取消",settingsSaved:"设置已保存",failedSaveSettings:"保存设置失败",globalLeadTimeSaved:"全局提前期已保存",skuLeadTimeOverride:"SKU 交货期覆盖",skuLeadTimeHint:"0 = 使用全局交货期。设置 >0 以覆盖此 SKU。",safetyMarginLabel:"安全余量",effectiveLeadTime:"有效交货期",effectiveLeadTimeHint:"max(全局 {{global}}天, SKU {{sku}}天)",reorderPointHint:"d̄ × LT + safety margin — 当库存降至此水平时下单",safetyMarginHint:"统计安全库存 (z=1.65 × σ × √LT) + 用户自定义缓冲",safetyMarginHintDays:"在统计安全库存基础上额外增加的缓冲。{{approx}}",safetyMarginHintDaysApprox:" ≈ 按当前速率 {{g}}g。",safetyMarginHintG:"在统计安全库存基础上增加的固定重量缓冲。{{approx}}",safetyMarginHintGApprox:" ≈ 按当前速率 {{days}}天。",individualSpools:"单个料卷",labelWeight:"标注重量",spoolCount_one:"{{count}}个线轴",spoolCount_other:"{{count}}个线轴",stockBreakRisk:"断货风险",stockBreakBefore:"补货前库存断档",stockBreakDetail:"剩余 {{days}} 天，交货期 {{lt}} 天。",reorderNow:"立即补货",reorderTriggerPassed:"触发日期 {{date}} 已过。",shoppingList:"购物清单",shoppingListItems_one:"（{{count}}项）",shoppingListItems_other:"（{{count}}项）",shoppingListEmpty:"购物清单为空。点击任意行的购物车图标以添加商品。",addToCart:"添加到购物清单",alertsSnoozed:"静音此SKU的提醒",alertsEnabled:"启用此SKU的提醒",addedToCart:"已添加到购物清单",failedAddItem:"添加项目失败",listView:"列表",logisticsView:"物流",qty:"数量",weight:"重量",leadTime:"交货期",expectedRestock:"预计补货日期",status:"状态",note:"备注",pending:"待处理",purchased:"已购买",received:"已收货",markPurchased:"标记为已购买",markReceived:"标记为已收货 — 将料卷添加到库存",resetToPending:"重置为待处理",remove:"移除",clearAll:"清空",downloadCsv:"CSV",addToCartTitle:"添加到购物清单",byQuantity:"按数量",byDuration:"按时长",numberOfSpools:"线轴数量",lastHowManyDays:"需要持续多少天？",noUsageQty:"无使用数据 — 数量已设为1。",noteOptional:"备注（可选）",notePlaceholder:"例如：用于项目X，紧急…",addNSpools_one:"添加{{count}}个线轴",addNSpools_other:"添加{{count}}个线轴",onArrival:"到货时",stockBreakIn:"{{days}} 天后断货。",stockRunsOutBefore:"库存在 {{lt}} 天交货期结束前耗尽。",atRate:"按 {{rate}}g/天的速度，您需要",moreSpools_one:"再{{count}}个线轴",moreSpools_other:"再{{count}}个线轴",bridgeGap:"来弥补缺口。",noReadAccess:"您没有查看库存预测的权限。",noWriteAccess:"您没有修改预测设置的权限。"}},Npe={nav:{printers:"印表機",archives:"歸檔",queue:"列印佇列",stats:"統計",profiles:"設定檔案",maintenance:"維護",projects:"專案",inventory:"耗材",files:"檔案管理器",makerworld:"MakerWorld",notifications:"通知",settings:"設定",system:"系統",collapseSidebar:"收起側邊欄",expandSidebar:"展開側邊欄",update:"更新",updateAvailable:"有可用更新：v{{version}}",updateAvailableBanner:"版本 {{version}} 已發布！",viewUpdate:"檢視更新",viewOnGithub:"在 GitHub 上檢視",keyboardShortcuts:"鍵盤快捷鍵 (?)",switchToLight:"切換到淺色模式",switchToDark:"切換到深色模式",switchToSystem:"切換到系統模式",smartSwitches:"智慧開關",logout:"登出",installApp:"安裝應用程式",installAppSuccess:"Bambuddy 已安裝"},common:{save:"儲存",saving:"儲存中...",cancel:"取消",delete:"刪除",edit:"編輯",add:"新增",close:"關閉",confirm:"確認",loading:"載入中...",error:"錯誤",errorLoading:"載入錯誤",retry:"重試",success:"成功",warning:"警告",enabled:"已啟用",disabled:"已停用",yes:"是",no:"否",on:"開",off:"關",all:"全部",none:"無",search:"搜尋",filter:"篩選",sort:"排序",refresh:"重新整理",download:"下載",upload:"上傳",uploading:"上傳中...",uploadFailed:"上傳失敗",actions:"操作",status:"狀態",name:"名稱",description:"描述",date:"日期",time:"時間",hours:"小時",minutes:"分鐘",seconds:"秒",days:"天",enable:"啟用",disable:"停用",permissions:"權限",noPrinters:"未設定印表機",noData:"尚無資料",linkNotFound:"未找到連結",required:"必填",optional:"可選",dismiss:"關閉",apply:"套用",reset:"重設",export:"匯出",import:"匯入",clear:"清除",selectAll:"全選",deselectAll:"取消全選",noChange:"— 不更改 —",unchanged:"未更改",unassigned:"未分配",unknown:"未知",unknownError:"未知錯誤",today:"今天",tomorrow:"明天",asap:"儘快",overdue:"已逾期",now:"現在",collapse:"收起",expand:"展開",viewArchive:"檢視歸檔",viewInFileManager:"在檔案管理器中檢視",addedBy:"由 {{username}} 新增",prints:"次列印",more:"還有 {{count}} 個",ascending:"升序",descending:"降序",back:"返回",copy:"複製",copied:"已複製!",printer:"印表機",remove:"移除",type:"類型",print:"列印",rename:"重新命名",move:"移動",create:"建立",duplicate:"複製",left:"左",right:"右"},printers:{addPreflight:{checking:"正在檢查連線...",warning:"部分連線檢查未通過。此印表機可能顯示為離線。請查看下方的檢查項目，盡量修復，或仍然儲存。",back:"返回",saveAnyway:"仍然儲存"},title:"印表機",addPrinter:"新增印表機",editPrinter:"編輯印表機",deletePrinter:"刪除印表機",printerName:"印表機名稱",serialNumber:"序列號",ipAddress:"IP 位址 / 主機名稱",accessCode:"存取碼",model:"型號",nozzleCount:"噴嘴數量",autoArchive:"自動歸檔",status:{available:"可用",idle:"空閒",printing:"列印中",paused:"已暫停",offline:"離線",problem:"故障",error:"錯誤",finished:"已完成",unknown:"未知"},temperatures:{nozzle:"噴嘴",bed:"熱床",chamber:"腔室"},progress:"{{percent}}% 完成",timeRemaining:"剩餘 {{time}}",deleteConfirm:'確定要刪除"{{name}}"嗎？',maintenanceOk:"維護正常",maintenanceWarning:"{{count}} 個警告",maintenanceWarning_plural:"{{count}} 個警告",maintenanceDue:"{{count}} 個到期",maintenanceDue_plural:"{{count}} 個到期",sort:{name:"名稱",status:"狀態",model:"型號",location:"位置",ascending:"升序排列",descending:"降序排列"},cardSize:{small:"小卡片",medium:"中卡片",large:"大卡片",extraLarge:"超大卡片"},hideOffline:"隱藏離線",nextAvailable:"下一個可用",powerOn:"開機",offlinePrintersWithPlugs:"帶智慧插座的離線印表機",noPrintersConfigured:"尚未設定印表機",search:"搜尋印表機...",noSearchResults:"沒有印表機符合您的搜尋或篩選條件",filter:{allStatuses:"所有狀態",allLocations:"所有位置"},toolbar:{filters:"篩選",view:"檢視",actions:"操作"},readyToPrint:"準備列印",external:"外部",extL:"外接左",extR:"外接右",deleteArchives:"刪除列印歸檔",noLabel:"無標籤",printPreview:"列印預覽",width:"寬度",height:"高度",noObjectsFound:"未找到物件",objectsLoadedOnPrintStart:"物件在列印開始時載入",willBeSkipped:"將被跳過",name:"名稱",serialCannotBeChanged:"序列號無法更改",locationHelp:"用於分組印表機和篩選佇列任務",wifiSignal:{veryWeak:"非常弱",weak:"弱",fair:"一般",good:"良好",excellent:"優秀"},maintenanceUpToDate:"所有維護均已完成 - 點選檢視",chamberLightOn:"開啟腔室燈",chamberLightOff:"關閉腔室燈",files:"檔案",browseFiles:"瀏覽印表機檔案",autoOffAfterPrint:"列印後自動關機",autoOffExecuted:"已執行自動關機 - 開啟印表機以重設",hmsErrors:"HMS 錯誤",viewHmsErrors:"檢視 {{count}} 個 HMS 錯誤",resume:"繼續",pause:"暫停",stop:"停止",camera:"攝影機",skipObject:"跳過物件",reconnect:"重新連線",forceRefresh:"強制重新整理",forceRefreshSuccess:"已請求重新整理",mqttDebug:"MQTT 偵錯",printerInformation:"印表機資訊",copyToClipboard:"複製",copied:"已複製！",state:"狀態",wifiSignalLabel:"Wi-Fi 訊號",developerMode:"開發者模式",enabled:"已啟用",disabled:"已停用",addedOn:"新增日期",sdCard:"SD 卡",inserted:"已插入",notInserted:"未插入",totalPrintHours:"列印時長",activeNozzle:"目前：{{nozzle}} 噴嘴",nozzleRack:"噴嘴架",nozzleDocked:"已停靠",nozzleMounted:"已安裝",nozzleActive:"使用中",nozzleIdle:"空閒",nozzleDiameter:"直徑",nozzleType:"類型",nozzleStatus:"狀態",nozzleFilament:"耗材",nozzleWear:"磨損",nozzleMaxTemp:"最高溫度",nozzleSerial:"序列號",nozzleHardenedSteel:"硬化鋼",nozzleStainlessSteel:"不鏽鋼",nozzleTungstenCarbide:"碳化鎢",nozzleFlow:"流量",nozzleHighFlow:"高流量",nozzleStandardFlow:"標準",firmwareUpdate:"韌體更新",firmwareInstructions:"在印表機觸控式螢幕上，前往",firmwareNav:"導航到",settings:"設定",firmware:"韌體",discoverPrinters:"發現印表機",searching:"搜尋中...",manualEntry:"手動輸入",addFromCloud:"從雲端新增",toast:{printerDeleted:"印表機已刪除",missingSpoolAssignment:"已在{{printer}}上開始列印。以下料槽未分配耗材: {{slots}}",printerAdded:"印表機已新增",printerUpdated:"印表機已更新",failedToDelete:"刪除印表機失敗",failedToAdd:"新增印表機失敗",connectionFailedNotAdded:"無法連線到印表機。請檢查 IP 位址、序號和存取碼，並確認已啟用僅區域網路（LAN-only）模式。該印表機未被新增。",failedToUpdate:"更新印表機失敗",commandSent:"命令已傳送",failedToSendCommand:"傳送命令失敗",turnedOn:"{{name}} 已開啟",failedToPowerOn:"開啟 {{name}} 失敗",scriptTriggered:"腳本已觸發",printStopped:"列印已停止",printPaused:"列印已暫停",printResumed:"列印已繼續",referenceDeleted:"參考已刪除",detectionAreaSaved:"檢測區域已儲存",failedToRunScript:"執行腳本失敗",failedToStopPrint:"停止列印失敗",failedToPausePrint:"暫停列印失敗",failedToResumePrint:"繼續列印失敗",failedToControlChamberLight:"控制腔室燈失敗",failedToSetSpeed:"設定列印速度失敗",failedToUpdateSetting:"更新設定失敗",failedToSkipObjects:"跳過物件失敗",failedToRereadRfid:"重新讀取 RFID 失敗",failedToCheckPlate:"檢查列印板失敗",failedToUpdateLabel:"更新標籤失敗",failedToDeleteReference:"刪除參考失敗",failedToSaveDetectionArea:"儲存檢測區域失敗",plateCheckEnabled:"列印板檢查已啟用",plateCheckDisabled:"列印板檢查已停用",calibrationSaved:"校準已儲存！",calibrationFailed:"校準失敗",rfidRereadInitiated:"已發起 RFID 重新讀取",loadInitiated:"載入耗材中…",unloadInitiated:"卸載耗材中…",failedToLoad:"載入耗材失敗",failedToUnload:"卸載耗材失敗"},connection:{connected:"已連線",offline:"離線"},plateStatus:{markCleared:"將列印板標記為已清理",cleared:"列印板已清理",notCleared:"列印板未清理",inUse:"列印板使用中"},queue:{inQueue:"佇列中有 {{count}} 個列印任務",inQueue_plural:"佇列中有 {{count}} 個列印任務"},controls:"控制",rfid:{reread:"重新讀取 RFID"},ams:{load:"載入",unload:"卸載"},bedJog:{title:"移動熱床",bed:"熱床",step:"步長 (mm)",up:"熱床上移",down:"熱床下移",disabledWhilePrinting:"列印中已停用",notHomedTitle:"印表機未歸零",notHomedMessage:"印表機自上次列印以來尚未歸零。請先執行自動歸零以確保安全定位（先停放噴頭，然後歸零 X、Y 和 Z），或者直接移動 — 軟限位將被繞過。",homeZ:"自動歸零",moveAnyway:"強制移動",homingStarted:"印表機自動歸零中…"},permission:{noAdd:"您沒有新增印表機的權限",noEdit:"您沒有編輯印表機的權限",noDelete:"您沒有刪除印表機的權限",noControl:"您沒有控制印表機的權限",noFiles:"您沒有存取印表機檔案的權限",noAmsRfid:"您沒有重新讀取 AMS RFID 的權限",noSmartPlugControl:"您沒有控制智慧插座的權限",noCamera:"您沒有檢視攝影機的權限"},modal:{addTitle:"新增印表機",editTitle:"編輯印表機",myPrinter:"我的印表機",selectModel:"選擇型號...",locationGroup:"位置 / 分組（可選）",locationPlaceholder:"例如：工作室、辦公室、地下室",autoArchiveLabel:"自動歸檔已完成的列印",fromPrinterSettings:"來自印表機設定",modelOptional:"型號（可選）",saveChanges:"儲存更改"},skipObjects:{tooltip:"跳過物件",onlyWhilePrinting:"跳過物件（僅在列印時）",requiresMultiple:"跳過物件（需要2個以上物件）",title:"跳過物件",matchIdsInfo:"將 ID 與印表機螢幕上的 ID 進行對照",printerShowsIds:"印表機螢幕上顯示列印板上物件的 ID",skipSelected:"跳過所選",skipping:"跳過中...",noObjectsSelected:"未選擇物件",selectObjectsToSkip:"選擇要從目前列印中跳過的物件",skipped:"已跳過",objectsSkipped:"物件已跳過",activeCount:"{{count}} 個活躍",waitForLayer:"等待第2層以上才能跳過物件（目前第 {{layer}} 層）",skip:"跳過",confirmTitle:"跳過物件？",confirmMessage:'確定要跳過"{{name}}"嗎？此操作無法復原。'},confirm:{deleteTitle:"刪除印表機",deleteMessage:'確定要刪除"{{name}}"嗎？這將移除所有連線設定。',deleteArchivesNote:"此印表機的所有列印歷史將被永久刪除。",keepArchivesNote:"列印歷史將保留，但不再與此印表機連結。",stopTitle:"停止列印",stopMessage:'確定要停止"{{name}}"上的目前列印嗎？這將取消列印任務。',stopButton:"停止列印",pauseTitle:"暫停列印",pauseMessage:'確定要暫停"{{name}}"上的目前列印嗎？',pauseButton:"暫停列印",resumeTitle:"繼續列印",resumeMessage:'確定要繼續"{{name}}"上的列印嗎？',resumeButton:"繼續列印",powerOnTitle:"開啟印表機",powerOnMessage:'確定要開啟"{{name}}"的電源嗎？',powerOnButton:"開機",powerOffTitle:"關閉印表機",powerOffMessage:'確定要關閉"{{name}}"的電源嗎？',powerOffWarning:'警告："{{name}}"正在列印中！確定要關閉電源嗎？這將中斷列印並可能損壞印表機。',powerOffButton:"關機",haToggleTitle:'切換"{{name}}"',haToggleMessage:"切換 Home Assistant 實體 {{entity}}？如果目前為開啟狀態，可能會關閉電源。",haToggleWarning:'警告："{{name}}"正在列印中！切換 {{entity}} 可能會切斷電源並中斷列印。是否繼續？',haToggleButton:"切換"},bulk:{select:"選擇",selectAll:"全選",selectByLocation:"按位置選擇",selected:"已選擇{{count}}臺",actions:{stop:"停止",pause:"暫停",resume:"繼續",clearPlate:"清除列印床",clearHMS:"清除通知"},confirm:{stopTitle:"停止{{count}}個列印任務",stopMessage:"這將取消{{count}}臺印表機上的活動列印任務。此操作無法復原。",stopButton:"全部停止",pauseTitle:"暫停{{count}}個列印任務",pauseMessage:"這將暫停{{count}}臺印表機上的活動列印任務。",pauseButton:"全部暫停",clearPlateTitle:"清除{{count}}個列印床",clearPlateMessage:"這將清除{{count}}臺印表機的列印床，可能會觸發佇列中的任務。",clearPlateButton:"全部清除"},success:"{{action}}已在{{count}}臺印表機上完成",partial:"{{succeeded}}成功，{{failed}}失敗",noneApplicable:"沒有選中的印表機處於適合此操作的狀態",selectByState:"按狀態選擇"},discovery:{title:"發現印表機",searching:"搜尋中...",scanning:"掃描中...",scanProgress:"掃描中... {{scanned}}/{{total}}",foundPrinters:"發現 {{count}} 臺印表機",noPrintersFound:"未找到印表機",noPrintersFoundSubnet:"在指定子網中未找到印表機。",noPrintersFoundNetwork:"在網路上未找到印表機。",allConfigured:"所有發現的印表機已設定完畢。",alreadyAdded:"已新增",select:"選擇",manualEntry:"手動輸入",addFromCloud:"從雲端新增",subnetToScan:"要掃描的子網",dockerNote:"偵測到 Docker 環境。請以 CIDR 格式輸入印表機所在子網。需要在 docker-compose.yml 中設定 network_mode: host。",scanSubnet:"掃描子網查詢印表機",discoverNetwork:"在網路上發現印表機",scanningSubnet:"正在掃描子網查詢拓竹印表機...",scanningNetwork:"正在掃描網路...",serialRequired:"需要序列號",unknown:"未知",failedToStart:"啟動發現失敗",customSubnetOption:"自訂子網路...",customSubnetLabel:"自訂子網路 (CIDR)",customSubnetNote:"如果您的印表機與此伺服器位於不同的網路中，請使用自訂子網路。FTP (990) 和 MQTT (8883) 連接埠必須能夠跨越路由邊界存取。"},drying:{start:"開始乾燥",stop:"停止乾燥",temperature:"溫度",duration:"時長",hours:"小時",timeRemaining:"剩餘 {{time}}",active:"乾燥中",notSupported:"不支援乾燥",powerRequired:"連線AMS電源介面卡以啟用乾燥",startingDrying:"正在啟動乾燥...",stoppingDrying:"正在停止乾燥...",rotateTray:"乾燥時旋轉料盤"},filaments:"耗材",openCameraOverlay:"開啟攝影機疊加層",openCameraWindow:"在新視窗中開啟攝影機",firmwareUpdateAvailable:"韌體更新可用：{{current}} → {{latest}}",firmwareUpToDate:"韌體 {{version}} — 已是最新",firmwareUpdateButton:"更新",plateDetection:{noPermission:"您沒有更新印表機的權限",enabledClick:"列印板檢查已啟用 - 點選停用",disabledClick:"列印板檢查已停用 - 點選啟用",manageCalibration:"管理列印板檢測校準",calibrationRequired:"需要校準",calibrationInstructions:"請確保列印板<strong>完全空置</strong>，然後點選校準。",calibrationDescription:"校準會拍攝空置列印板的參考影像。後續檢查將與此參考進行比較以檢測物體。",calibrationTip:"<strong>提示：</strong>您最多可以為不同的列印板儲存5個校準。系統會在檢查時自動使用最佳匹配。",plateEmpty:"列印板似乎是空的",objectsDetected:"在列印板上偵測到物體",confidence:"置信度",difference:"差異",analysisPreview:"分析預覽：",analysisLegend:"綠色框 = 檢測區域，紅色覆蓋 = 與校準的差異",savedReferences:"已儲存的參考 ({{count}}/{{max}})",deleteReference:"刪除參考",labelPlaceholder:"標籤...",clickToEdit:"{{label}} - 點選編輯",clickToAddLabel:"點選新增標籤"},speed:{title:"列印速度",silent:"靜音 (50%)",standard:"標準 (100%)",sport:"運動 (124%)",ludicrous:"瘋狂 (166%)"},airduct:{title:"風道模式",cooling:"製冷",heating:"加熱"},noSdCard:"無SD",door:{open:"開",closed:"關"},fans:{partCooling:"零件冷卻風扇",auxiliary:"輔助風扇",chamber:"腔室風扇"},clickToViewHmsErrors:"點選檢視 HMS 錯誤",estimatedCompletion:"預計完成時間",plateNumber:"板 {{number}}",slotOptions:"槽位選項",amsPopup:{friendlyName:"AMS 名稱",friendlyNamePlaceholder:"例如 AMS 友好名稱",serialNumber:"序列號",firmwareVersion:"韌體",save:"儲存",clear:"清除",noEditPermission:"您沒有重新命名 AMS 單元的權限"},firmwareModal:{title:"韌體更新",titleUpToDate:"韌體資訊",currentVersion:"目前版本：",latestVersion:"最新版本：",releaseNotes:"發布說明",checkingPrereqs:"正在檢查前提條件...",sdCardReady:"SD 卡已就緒。點選下方上傳韌體。",uploadedSuccess:"韌體已上傳到 SD 卡！",applyInstructions:"在印表機上套用更新：",step1:"在印表機觸控式螢幕上，前往<strong>設定</strong>",step2:"導航到<strong>韌體</strong>",step3:"選擇<strong>從 SD 卡更新</strong>",step4:"更新將需要 10-20 分鐘",done:"完成",starting:"啟動中...",uploadFirmware:"上傳韌體",uploadFailed:"上傳啟動失敗：{{error}}",uploadedToast:"韌體已上傳！請在印表機螢幕上觸發更新。",availableVersions:"可用版本",usable:"可用",unavailable:"不可用",installed:"已安裝",newerBadge:"較新",olderBadge:"較舊",currentBadge:"目前"},accessCodePlaceholder:"留空以保持目前值",roi:{title:"檢測區域 (ROI)",xStart:"X 起點",yStart:"Y 起點",width:"寬度",height:"高度",instruction:"調整檢測區域以聚焦到列印板。預覽中的綠色框顯示目前區域。"},developerModeWarning:"以下印表機未啟用開發者區域網路模式：{{names}}。某些功能可能無法使用。",howToEnable:"如何啟用",incompatibleFile:"此檔案是為 {{slicedFor}} 切片的，但該印表機是 {{printerModel}}",dropNotPrintable:"只能列印 .gcode 和 .gcode.3mf 檔案",dropToPrint:"拖放以列印",cannotPrint:"印表機忙碌"},archives:{title:"列印歸檔",searchPlaceholder:"搜尋歸檔...",filterByPrinter:"按印表機篩選",filterByStatus:"按狀態篩選",sortBy:"排序方式",sortNewest:"最新優先",sortOldest:"最舊優先",sortName:"名稱",sortDuration:"時長",sortLargest:"最大優先",sortSmallest:"最小優先",sortSize:"大小",noArchives:"未找到歸檔",noArchivesSearch:"沒有匹配搜尋的歸檔",originalPrintNotVisible:"原始列印不可見 - 請嘗試清除篩選條件",noArchivesYet:"尚無歸檔",prints:"條列印",pagination:{showing:"顯示",to:"至",of:"共",show:"每頁",page:"頁",all:"全部"},loadingArchives:"載入歸檔中...",releaseToUpload:"放開以上傳",showAll:"顯示全部",showFavoritesOnly:"僅顯示收藏",gridView:"網格檢視",listView:"列表檢視",calendarView:"日曆檢視",logView:"列印日誌",manageTags:"管理標籤",showFailedPrints:"顯示失敗的列印",hideFailedPrints:"隱藏失敗的列印",hideDuplicates:"隱藏重複項",viewOriginalPrint:"點選檢視原始列印 (#{{id}})",printTime:"列印時間",filamentUsed:"耗材用量",cost:"成本",reprint:"重新列印",preview:"預覽",deleteArchive:"刪除歸檔",deleteConfirm:"確定要刪除此歸檔嗎？",favorite:"收藏",unfavorite:"取消收藏",viewDetails:"檢視詳情",status:{completed:"已完成",failed:"失敗",stopped:"已停止"},toast:{source3mfAttached:"源 3MF 已附加：{{filename}}",failedUploadSource3mf:"上傳源 3MF 失敗",source3mfRemoved:"源 3MF 已移除",failedRemoveSource3mf:"移除源 3MF 失敗",f3dAttached:"F3D 已附加：{{filename}}",failedUploadF3d:"上傳 F3D 失敗",f3dRemoved:"F3D 已移除",failedRemoveF3d:"移除 F3D 失敗",timelapseAttached:"縮時攝影已附加：{{filename}}",timelapseAlreadyAttached:"縮時攝影已附加",noMatchingTimelapse:"未找到匹配的縮時攝影",failedScanTimelapse:"掃描縮時攝影失敗",failedAttachTimelapse:"附加縮時攝影失敗",timelapseRemoved:"縮時攝影已移除",failedRemoveTimelapse:"移除縮時攝影失敗",timelapseUploaded:"縮時攝影已上傳：{{filename}}",failedUploadTimelapse:"上傳縮時攝影失敗",archiveDeleted:"歸檔已刪除",failedDeleteArchive:"刪除歸檔失敗",addedToFavorites:"已新增到收藏",removedFromFavorites:"已從收藏中移除",projectUpdated:"專案已更新",failedUpdateProject:"更新項目失敗",linkCopied:"連結已複製到剪貼簿",failedCopyLink:"複製連結失敗",photoDeleted:"照片已刪除",failedDeletePhoto:"刪除照片失敗",failedDeleteArchives:"刪除歸檔失敗",failedUpdateFavorites:"更新收藏失敗",exportDownloaded:"匯出已下載",exportFailed:"匯出失敗"},menu:{print:"列印",schedule:"排程",openInBambuStudio:"在切片軟體中開啟",slice:"切片",externalLink:"外部連結",viewOnMakerWorld:"在 MakerWorld 上檢視",preview3d:"3D 預覽",viewTimelapse:"檢視縮時攝影",scanForTimelapse:"掃描縮時攝影",uploadTimelapse:"上傳縮時攝影",removeTimelapse:"移除縮時攝影",downloadSource3mf:"下載源 3MF",uploadSource3mf:"上傳源 3MF",replaceSource3mf:"替換源 3MF",removeSource3mf:"移除源 3MF",uploadF3d:"上傳 F3D",replaceF3d:"替換 F3D",downloadF3d:"下載 F3D",removeF3d:"移除 F3D",download:"下載",copyDownloadLink:"複製下載連結",qrCode:"QR 碼",viewPhotos:"檢視照片",viewPhotosCount:"檢視照片 ({{count}})",projectPage:"專案頁面",addToFavorites:"新增到收藏",removeFromFavorites:"從收藏中移除",edit:"編輯",printLog:"列印記錄",goToProject:"前往專案：{{name}}",addToProject:"新增到專案",removeFromProject:"從專案中移除",loading:"載入中...",noProjectsAvailable:"無可用專案",searchProjects:"搜尋專案…",select:"選擇",deselect:"取消選擇",delete:"刪除"},permission:{noReprint:"您沒有重新列印此歸檔的權限",noAddToQueue:"您沒有新增到佇列的權限",noUpdateArchives:"您沒有更新歸檔的權限",noUploadFiles:"您沒有上傳檔案的權限",noDownload:"您沒有下載歸檔的權限",noCopyLink:"您沒有複製下載連結的權限",noDelete:"您沒有刪除此歸檔的權限",noCreate:"您沒有建立歸檔的權限"},platePicker:{title:"選擇要預覽的列印板",hint:"此存檔包含多個列印板。選擇一個在 GCode 檢視器中開啟。",plateLabel:"列印板 {{index}}",objectCount:"{{count}} 個物件",objectCount_plural:"{{count}} 個物件",noGcode:"此存檔沒有可預覽的已切片 G 代碼。請先在 Bambu Studio 中開啟並切片。"},card:{previousPlate:"上一個板",nextPlate:"下一個板",plateNumber:"板 {{index}}",moreOptions:"右鍵檢視更多選項",addToFavorites:"新增到收藏",removeFromFavorites:"從收藏中移除",cancelled:"已取消",failed:"失敗",duplicate:"重複",duplicateTitle:"此模型之前已列印過",openSource3mf:"在 Bambu Studio 中開啟源 3MF（右鍵檢視更多選項）",downloadF3d:"下載 Fusion 360 設計檔案",viewTimelapse:"檢視縮時攝影",viewPhoto:"檢視 1 張照片",viewPhotos:"檢視 {{count}} 張照片",openFolder:"開啟資料夾：{{name}}",slicedFile:"已切片檔案 - 可以列印",sourceFile:"僅原始檔 - 無 AMS 對應可用",gcode:"GCODE",source:"原始檔",project:"專案：{{name}}",runsBadge:"{{count}} 次列印",runsBadgeTitle:"共 {{count}} 次列印 — 成功 {{successful}} 次，失敗 {{failed}} 次。點擊查看完整列印記錄。",estimated:"預計：{{time}}",actual:"實際：{{time}}",accuracy:"準確度：{{percent}}%",filament:"{{weight}} 克",layer:"{{count}} 層",layers:"{{count}} 層",object:"{{count}} 個物件",objects:"{{count}} 個物件",slicedFor:"為 {{model}} 切片",uploadedBy:"上傳者",noPermissionReprint:"您沒有重新列印的權限",noFileForReprint:"無可用的 3MF 檔案 — 列印紀錄時無法從印表機下載該檔案",noPermissionEdit:"您沒有編輯歸檔的權限",noPermissionDelete:"您沒有刪除歸檔的權限",reprint:"重新列印",schedulePrint:"排程列印",schedule:"排程",openInBambuStudio:"在切片軟體中開啟",openInBambuStudioToSlice:"在切片軟體中開啟進行切片",slice:"切片",externalLink:"外部連結",makerWorld:"MakerWorld：{{designer}}",viewProject:"檢視專案",noExternalLink:"無外部連結",preview3d:"3D 預覽",download:"下載",edit:"編輯",delete:"刪除"},runLog:{title:"列印記錄",modalTitle:"列印記錄 — {{name}}",modalTitleFallback:"此歸檔",empty:"此歸檔尚未記錄任何列印事件。",col:{date:"日期",status:"狀態",duration:"時長",filament:"耗材",cost:"成本"},status:{completed:"已完成",failed:"失敗",cancelled:"已取消",stopped:"已停止",skipped:"已略過",printing:"列印中"}},modal:{deleteArchive:"刪除歸檔",deleteConfirm:'確定要刪除"{{name}}"嗎？此操作無法復原。',deleteButton:"刪除",deletePurgeStats:"同時從快速統計中刪除此列印（耗材、時間、成本、能耗）",removeSource3mf:"移除源 3MF",removeSource3mfConfirm:'確定要從"{{name}}"中移除源 3MF 檔案嗎？這將刪除原始切片專案檔案。',removeButton:"移除",removeF3d:"移除 F3D",removeF3dConfirm:'確定要從"{{name}}"中移除 Fusion 360 設計檔案嗎？',removeTimelapse:"移除縮時攝影",removeTimelapseConfirm:'確定要從"{{name}}"中移除縮時攝影影片嗎？',timelapse:"{{name}} - 縮時攝影",selectTimelapse:"選擇縮時攝影",selectTimelapseDesc:"未找到自動匹配。請選擇此列印的縮時攝影：",deleteArchives:"刪除歸檔",deleteArchivesConfirm:"確定要刪除 {{count}} 個歸檔嗎？此操作無法復原。",deleteCount:"刪除 {{count}} 個"},page:{title:"歸檔",printsCount:"{{filtered}} / {{total}} 次列印",dropFilesHere:"將 .3mf 檔案拖放到此處",releaseToUpload:"放開以上傳",only3mfSupported:"僅支援 .3mf 檔案",close:"關閉",selected:"已選擇 {{count}} 個",selectAll:"全選",tags:"標籤",project:"專案",favorite:"收藏",delete:"刪除",toggledFavorites:"已切換 {{count}} 個歸檔的收藏狀態",failedUpdateFavorites:"更新收藏失敗",archivesDeleted:"已刪除 {{count}} 個歸檔",failedDeleteArchives:"刪除歸檔失敗",photoDeleted:"照片已刪除",failedDeletePhoto:"刪除照片失敗"},list:{name:"名稱",printer:"印表機",date:"日期",size:"大小",actions:"操作",hasTimelapse:"有縮時攝影"},log:{date:"日期",printName:"列印名稱",printer:"印表機",user:"使用者",status:"狀態",duration:"時長",filament:"耗材",allPrinters:"所有印表機",allUsers:"所有使用者",allStatuses:"所有狀態",cancelled:"已取消",skipped:"已跳過",dateFrom:"從",dateTo:"到",noEntries:"未找到列印日誌條目",showing:"顯示 {{count}} / {{total}} 條",rowsPerPage:"行數",page:"頁",prev:"上一頁",next:"下一頁",clearLog:"清除日誌",clearLogTitle:"清除列印日誌",clearLogConfirm:"所有列印日誌條目將被永久刪除。歸檔和佇列項目不受影響。此操作無法復原。確定要繼續嗎？",clearLogButton:"全部清除",cleared:"已清除 {{count}} 條日誌",clearFailed:"清除列印日誌失敗"}},queue:{filamentShort:{rowBadge:"所分配料盤的線材不足",rowTooltip:"調度程式已標記此項目。點擊播放查看各槽位的不足量，並決定是否仍要列印。",confirmTitle:"線材不足",confirmIntro:"所分配的料盤至少有一個槽位無法滿足。仍要列印嗎？",lineItem:"槽位 {{slot}}：需要 {{required}} g，剩餘 {{remaining}} g",unknown:"不明",printAnyway:"仍要列印"},title:"列印佇列",subtitle:"排程和管理您的列印任務",addToQueue:"新增到佇列",print:"列印",reprint:"重新列印",schedulePrint:"排程列印",editQueueItem:"編輯佇列項目",printToPrinters:"列印到 {{count}} 臺印表機",queueToPrinters:"佇列到 {{count}} 臺印表機",queueSelectedPlates:"將 {{count}} 個熱床加入佇列",selectAllPlates:"選擇全部 {{count}} 個熱床",deselectAll:"取消全選",printQueued:"已加入列印佇列",itemsQueued:"{{count}} 個任務已加入佇列",sending:"傳送中...",sendingProgress:"傳送中 {{current}}/{{total}}...",adding:"新增中...",addingProgress:"新增中 {{current}}/{{total}}...",savingProgress:"儲存中 {{current}}/{{total}}...",clearQueue:"清空佇列",clearHistory:"清除歷史",emptyQueue:"佇列為空",position:"位置",scheduledTime:"排程時間",moveUp:"上移",moveDown:"下移",startNow:"立即開始",printingInProgress:"列印進行中...",viewArchive:"檢視歸檔",viewInFileManager:"在檔案管理器中檢視",itemCount:"{{count}} 個項目",itemCount_plural:"{{count}} 個項目",dragToReorder:"拖曳以重新排序（僅限盡快）",reorderHint:'位置僅影響"儘快"項目。排程項目按設定時間執行。',sjf:{label:"SJF",tooltip:"最短任務優先 — 排程器優先處理較短的列印任務"},addedBy:"由 {{name}} 新增",nextInQueue:"佇列中的下一個",clearPlateSuccess:"列印板已清理 — 準備進行下一個列印",plateNumber:"板 {{index}}",quantity:"數量",quantityHint:"建立 {{count}} 個佇列項目",activeBatches:"活躍批次",batchProgress:"已完成 {{completed}}/{{total}}",cancelBatch:"取消剩餘",batchCancelled:"已取消剩餘批次項目",cancelBatchConfirmTitle:"取消批次",cancelBatchConfirmMessage:"取消此批次中所有剩餘的待處理項目？",batch:"批次",sections:{currentlyPrinting:"正在列印",queued:"佇列中",history:"歷史"},status:{pending:"等待中",waiting:"等待中",printing:"列印中",paused:"已暫停",completed:"已完成",failed:"失敗",skipped:"已跳過",cancelled:"已取消"},summary:{printing:"列印中",queued:"佇列中",totalTime:"總佇列時間",totalWeight:"總佇列重量",history:"歷史"},filter:{allPrinters:"所有印表機",unassigned:"未分配",allStatus:"所有狀態",allLocations:"所有位置",any:"任意"},sort:{byPosition:"按位置排序",byName:"按名稱排序",byPrinter:"按印表機排序",bySchedule:"按排程排序",byDate:"按日期排序",ascendingOldest:"升序（最舊優先）",descendingNewest:"降序（最新優先）"},badges:{staged:"已暫存",requiresPrevious:"需要前一個成功",autoPowerOff:"自動關機",gcodeInjection:"G-code"},empty:{title:"沒有排程的列印",description:'從歸檔頁面使用右鍵選單中的"排程"選項來排程列印，或拖放檔案開始。'},time:{asap:"儘快",overdue:"已逾期",now:"現在",lessThanMinute:"不到一分鐘",inMinutes:"{{count}} 分鐘後",inHours:"{{count}} 小時後"},actions:{stopPrint:"停止列印",startPrint:"開始列印",requeue:"重新佇列"},bulkEdit:{title:"編輯 {{count}} 個項目",title_plural:"編輯 {{count}} 個項目",description:"僅更改的設定將套用於所選項目。",printer:"印表機",noChange:"— 不更改 —",queueOptions:"佇列選項",staged:"暫存（手動開始）",autoPowerOff:"列印後自動關機",requirePrevious:"要求前一個成功",printOptions:"列印選項",bedLevelling:"熱床調平",flowCalibration:"流量校準",vibrationCalibration:"振動校準",layerInspection:"首層檢查",timelapse:"縮時攝影",useAms:"使用 AMS",applyChanges:"套用更改",selectAll:"全選",deselectAll:"取消全選",selected:"已選擇 {{count}} 個",editSelected:"編輯所選",cancelSelected:"取消所選"},confirm:{cancelTitle:"取消排程列印",cancelMessage:'確定要取消"{{name}}"嗎？',stopTitle:"停止列印",stopMessage:'確定要停止目前列印"{{name}}"嗎？這將取消印表機上的列印任務。',removeTitle:"從歷史中移除",removeMessage:'確定要從佇列歷史中移除"{{name}}"嗎？',clearHistoryTitle:"清除歷史",clearHistoryMessage:"確定要從歷史中移除所有 {{count}} 個項目嗎？",cancelButton:"取消列印",stopButton:"停止列印",thisPrint:"此列印",thisItem:"此項目"},toast:{cancelled:"佇列項目已取消",cancelFailed:"取消項目失敗",removed:"佇列項目已移除",removeFailed:"移除項目失敗",stopped:"列印已停止",stopFailed:"停止列印失敗",released:"列印已加入佇列",startFailed:"開始列印失敗",reorderFailed:"重新排序佇列失敗",historyCleared:"已清除 {{count}} 條歷史紀錄",clearHistoryFailed:"清除歷史失敗",updateFailed:"更新項目失敗",bulkCancelled:"已取消 {{count}} 個項目",bulkCancelFailed:"批次取消項目失敗"},timeline:{listView:"列表",timelineView:"時間線",unassigned:"未分配",noData:"當天沒有計畫的列印任務",allDoneBy:"所有列印預計在 {{time}} 前完成",staged:"暫存",filterAll:"全部顯示",filterPrinting:"列印中",filterQueued:"佇列中",time:{anyMoment:"即將完成",minutesLeft:"剩餘{{minutes}} 分鐘",hoursLeft:"剩餘{{hours}}小時",hoursMinutesLeft:"剩餘{{hours}}小時{{minutes}} 分鐘"},day:{previous:"前一天",next:"後一天",today:"今天"}},permissions:{noStopPrint:"您沒有停止列印的權限",noStartPrint:"您沒有開始列印的權限",noEdit:"您沒有編輯此佇列項目的權限",noCancel:"您沒有取消此佇列項目的權限",noRequeue:"您沒有重新佇列的權限",noRemove:"您沒有移除此佇列項目的權限",noClearHistory:"您沒有清除所有歷史的權限",noEditItems:"您沒有編輯佇列項目的權限",noCancelItems:"您沒有取消佇列項目的權限"}},backgroundDispatch:{unknownFile:"未知檔案",unknownPrinter:"未知印表機",startingPrints:"正在開始列印",progressSummary:"{{complete}}/{{total}} 完成 • 已分發：{{dispatched}} • 處理中：{{processing}}",expandDetails:"展開分發詳情",collapseDetails:"收起分發詳情",dismissToast:"關閉分發通知",cancelDispatchJob:"取消分發任務",cancel:"取消",cancelling:"取消中…",awaitingPrinter:"等待印表機…",status:{dispatched:"已分發",processing:"處理中",completed:"已完成",failed:"失敗",cancelled:"已取消"},toast:{cancellingUpload:"取消上傳中...",cancelled:"分發已取消",cancelFailed:"取消分發失敗",completeWithFailures:"後台分發完成：{{completed}} 成功，{{failed}} 失敗",completeSuccess:"後台分發完成：{{completed}} 成功",printStartedRemaining:"{{completed}} 個列印已開始，{{remaining}} 個正在傳送..."}},stats:{title:"統計",subtitle:"拖曳小工具以重新排列。點選眼睛圖示隱藏。",overview:"概覽",totalPrints:"總列印次數",successRate:"成功率",totalPrintTime:"總列印時間",printTime:"列印時間",totalFilament:"總耗材用量",filamentUsed:"耗材用量",filamentCost:"耗材成本",totalCost:"總成本",energyUsed:"能耗",energyCost:"能源成本",energyWarmingUpTooltip:"能耗追蹤正在收集每小時快照。當所選範圍之前至少存在一個快照時，時間段合計將變得準確。早期數值可能偏低。",averagePrintTime:"平均列印時間",printsPerDay:"每日列印次數",byPrinter:"按印表機",printsByPrinter:"各印表機列印次數",byMaterial:"按材料",byMonth:"按月份",last7Days:"最近 7 天",last30Days:"最近 30 天",last90Days:"最近 90 天",allTime:"全部時間",quickStats:"快速統計",printActivity:"列印活動",filamentTypes:"耗材類型",filamentTrends:"耗材趨勢",failureAnalysis:"失敗分析",timeAccuracy:"時間準確度",successful:"成功：",failed:"失敗：",cancelled:"已取消：",perfectEstimate:"100% = 完美估計",noTimeAccuracyData:"尚無時間準確度資料",noFilamentData:"尚無耗材資料",noPrinterData:"尚無印表機資料",noPrintData:"尚無列印資料",noPrintDataLast30Days:"最近 30 天無列印資料",failureReasons:"失敗原因",topFailureReasons:"主要失敗原因",failedPrintsCount:"{{failed}} / {{total}} 次列印失敗",lastWeekRate:"上週：{{rate}}%",resetLayout:"重設佈局",recalculateCosts:"重新計算成本",recalculateCostsHint:"使用目前耗材價格重新計算所有歸檔成本",exportStats:"匯出統計",exportAsCsv:"匯出為 CSV",exportAsExcel:"匯出為 Excel",hiddenCount:"{{count}} 個已隱藏",exportDownloaded:"匯出已下載",exportFailed:"匯出失敗",layoutReset:"佈局已重設",recalculatedCosts:"已為 {{count}} 個歸檔重新計算成本",recalculateFailed:"重新計算成本失敗",loadingStats:"載入統計資料中...",noPermissionResetLayout:"您沒有重設佈局的權限",noPermissionRecalculate:"您沒有重新計算成本的權限",noPrintDataInRange:"所選範圍內無列印資料",periodFilament:"期間耗材",periodCost:"期間成本",avgPerPrint:"每次列印平均",usageOverTime:"隨時間的使用量",filamentByWeight:"重量",printDuration:"列印時長",printerUtilization:"印表機利用率",filamentSuccess:"按材料成功率",printHabits:"列印習慣",printTimeOfDay:"列印時段",colorDistribution:"顏色分佈",noColorData:"尚無顏色資料",records:"紀錄",longestPrint:"最長列印",heaviestPrint:"最重列印",mostExpensivePrint:"最貴列印",busiestDay:"最忙碌的一天",successStreak:"連續成功",streakPrint:"連續列印",streakPrints:"{{count}} 次連續列印",printerStats:"印表機統計",hours:"小時",avgPrints:"平均列印",noArchiveData:"尚無列印資料",filamentByTime:"時間",avgWeight:"平均重量",avgTime:"平均時間",filamentByPrints:"列印次數",timeframe:{today:"今天","this-week":"本週","this-month":"本月","last-7":"最近 7 天","last-30":"最近 30 天","last-90":"最近 90 天","this-year":"今年","all-time":"全部時間",custom:"自訂範圍",from:"從",to:"到"},allUsers:"所有使用者",noUser:"無使用者（系統）",filterByUser:"按使用者篩選"},maintenance:{title:"維護",overview:"概覽",allOk:"所有維護均已完成",dueCount:"{{count}} 項到期",dueCount_plural:"{{count}} 項到期",warningCount:"{{count}} 個警告",warningCount_plural:"{{count}} 個警告",totalPrintTime:"總列印時間",nextMaintenance:"下次維護",nothingDue:"無到期項目",tasks:"任務",lastPerformed:"上次執行",interval:"間隔",hoursRemaining:"剩餘 {{hours}} 小時",hoursOverdue:"逾期 {{hours}} 小時",markDone:"標記為完成",performMaintenance:"執行維護",history:"歷史",noHistory:"無維護歷史",editPrintHours:"編輯列印時間",currentHours:"目前小時數",statusTab:"狀態",settingsTab:"設定",overdueCount:"{{count}} 個逾期",dueSoonCount:"{{count}} 個即將到期",dueSoon:"即將到期",allGood:"一切正常",overdueBy:"逾期 {{duration}}",dueIn:"{{duration}} 後到期",timeLeft:"剩餘 {{duration}}",day:"1 天",days:"{{count}} 天",week:"1 週",weeks:"{{count}} 週",month:"1 個月",months:"{{count}} 個月",year:"1 年",maintenanceTypes:"維護類型",maintenanceTypesDescription:"系統類型和您的自訂維護任務",addCustomType:"新增自訂類型",restoreDefaults:"恢復預設任務",intervalType:"間隔類型",intervalValue:"間隔 ({{type}})",icon:"圖示",documentationLink:"說明文件連結（可選）",assignToPrinters:"分配給印表機",selectAtLeastOnePrinter:"至少選擇一臺印表機",addType:"新增類型",custom:"自訂",printHours:"列印小時數",calendarDays:"日曆天數",exampleName:"例如：更換 HEPA 過濾器",viewDocumentation:"檢視說明文件",timeBasedInterval:"基於時間的間隔",intervalOverrides:"間隔覆蓋",intervalOverridesDescription:"為特定印表機自訂間隔",assignedToPrinters:"已分配給印表機：",noPrintersAssigned:"未分配印表機",addPrinterShort:"新增：",printersAssignedClick:"已分配 {{count}} 臺印表機 - 點選管理",removeFromPrinter:"從此印表機移除",types:{lubricateCarbonRods:"潤滑碳纖維杆",lubricateRails:"潤滑線性導軌",cleanNozzle:"清潔噴嘴/熱端",checkBelts:"檢查皮帶張力",cleanBuildPlate:"清潔列印板",checkExtruder:"檢查擠出機齒輪",checkCooling:"檢查冷卻風扇",generalInspection:"綜合檢查",cleanCarbonRods:"清潔碳纖維杆",lubricateSteelRods:"潤滑鋼杆",cleanSteelRods:"清潔鋼杆",cleanLinearRails:"清潔線性導軌",checkPtfeTube:"檢查 PTFE 管",replaceHepaFilter:"更換 HEPA 過濾器",replaceCarbonFilter:"更換活性炭過濾器",lubricateLeftNozzleRail:"潤滑左噴嘴導軌"},maintenanceComplete:"維護已標記為完成",typeUpdated:"維護類型已更新",typeDeleted:"維護類型已刪除",defaultsRestored:"已恢復 {{count}} 個預設任務",printHoursUpdated:"列印小時數已更新",printerAssigned:"印表機已分配",printerRemoved:"印表機已移除",deleteTypeConfirm:'刪除"{{name}}"？',deleteSystemTypeTitle:"刪除預設維護任務？",deleteSystemTypeMessage:'確定要刪除預設維護任務"{{name}}"嗎？',noPermissionUpdate:"您沒有更新維護項目的權限",noPermissionPerform:"您沒有執行維護的權限",noPermissionEditTypes:"您沒有編輯維護類型的權限",noPermissionDeleteTypes:"您沒有刪除維護類型的權限",noPermissionEditHours:"您沒有編輯列印時間的權限",noPermissionRemovePrinter:"您沒有移除印表機分配的權限",noPermissionAssignPrinter:"您沒有分配印表機的權限",noPermissionEditIntervals:"您沒有編輯間隔的權限",configureSettings:"設定維護類型和間隔"},settings:{title:"設定",general:"通用",tabs:{general:"通用",smartPlugs:"智慧插座",notifications:"通知",queue:"工作流程",filament:"耗材",network:"網路",apiKeys:"API 金鑰",virtualPrinter:"虛擬印表機",spoolbuddy:"SpoolBuddy",failureDetection:"故障檢測",users:"身份驗證",backup:"備份",emailAuth:"信箱認證",ldap:"LDAP",twoFa:"雙因素認證",oidc:"SSO / OIDC",security:"安全"},spoolbuddy:{infoTitle:"SpoolBuddy 裝置",infoBody:"SpoolBuddy kiosk 透過心跳自動註冊。如果裝置不再使用，或守護程式當機遺留了過時的重複項，可在此取消註冊。",duplicatesTitle:"已註冊 {{count}} 台裝置",duplicatesBody:"kiosk 介面只使用最先註冊的裝置。如果其中有因當機遺留的過時重複項，請取消註冊它——線上裝置會在下次心跳時重新註冊自己。",empty:"尚未註冊任何 SpoolBuddy 裝置。",online:"線上",offline:"離線",unregister:"取消註冊",unregisterSuccess:"裝置已取消註冊",unregisterError:"取消註冊裝置失敗",confirmTitle:"取消註冊 SpoolBuddy 裝置？",confirmBody:'將從資料庫中移除 "{{hostname}}" ({{deviceId}})。如果裝置線上，會在下次心跳時重新註冊自己。',ipAddress:"IP 位址",firmware:"韌體",lastSeen:"上次線上",daemonUptime:"守護程式執行時間",systemUptime:"系統執行時間",never:"從未",nfc:"NFC",scale:"磅秤",cpuTemp:"CPU 溫度",cpuLoad:"CPU 負載",memory:"記憶體",disk:"磁碟",update:"更新",updateConfirmTitle:"更新 SpoolBuddy 守護程式？",updateConfirmBody:'對 "{{hostname}}" 觸發軟體更新？更新完成後守護程式將重新啟動。',restartBrowser:"重新啟動瀏覽器",restartBrowserConfirmTitle:"重新啟動 kiosk 瀏覽器？",restartBrowserConfirmBody:'在 "{{hostname}}" 上重新啟動 kiosk 瀏覽器？顯示將短暫黑屏。',restartDaemon:"重新啟動守護程式",restartDaemonConfirmTitle:"重新啟動 SpoolBuddy 守護程式？",restartDaemonConfirmBody:'在 "{{hostname}}" 上重新啟動 SpoolBuddy 守護程式？裝置將離線幾秒鐘。',reboot:"重新開機",rebootConfirmTitle:"重新開機？",rebootConfirmBody:'重新開機 "{{hostname}}"？裝置將離線約一分鐘。',shutdown:"關機",shutdownConfirmTitle:"關閉裝置？",shutdownConfirmBody:'關閉 "{{hostname}}"？您需要實體存取才能重新開機。',commandConfirm:"確認",commandQueued:"命令已加入佇列",commandError:"傳送命令失敗"},ldap:{title:"LDAP 認證",enabledDesc:"LDAP 認證已啟用",disabledDesc:"LDAP 認證已停用",disabledHint:"在下方設定並儲存 LDAP 設定，然後啟用。",enabled:"LDAP 認證已啟用",disabled:"LDAP 認證已停用",feature1:"使用者可以使用 LDAP 憑據登入",feature2:"本機管理員帳戶作為後備保留",feature3:"登入時 LDAP 群組對應到 BamBuddy 群組",serverConfig:"LDAP 伺服器設定",serverUrl:"伺服器 URL",serverUrlHint:"使用 ldap:// 進行標準連線或 ldaps:// 進行 SSL 連線",security:"安全",securityHint:"StartTLS 將普通連線升級為 TLS。LDAPS 從一開始就使用 TLS。",bindDn:"繫結 DN（服務帳戶）",bindPassword:"繫結密碼",searchBase:"搜尋基礎 DN",userFilter:"使用者搜尋過濾器",userFilterHint:"{username} 替換為登入使用者名稱。OpenLDAP 使用 (uid={username})。",advanced:"進階",autoProvision:"自動建立使用者",autoProvisionHint:"首次 LDAP 登入時自動建立 BamBuddy 帳戶",defaultGroup:"預設群組",defaultGroupNone:"— 無（無復原）—",defaultGroupHint:"當 LDAP 使用者透過身份驗證但不在任何已對應的 LDAP 群組中時分配的備援群組。留空以使未對應的使用者沒有權限。",groupMapping:"群組對應（JSON）",groupMappingHint:"將 LDAP 群組 DN 對應到 BamBuddy 群組。可用群組：",testConnection:"測試連線",settingsSaved:"LDAP 設定已儲存",errors:{serverRequired:"LDAP 伺服器 URL 為必填項",searchBaseRequired:"搜尋基礎 DN 為必填項",enableAuthFirst:"請先啟用認證",configureLdapFirst:"請先儲存 LDAP 設定"}},email:{smtpSettings:"SMTP 設定",smtpHost:"SMTP 伺服器",smtpPort:"SMTP 連接埠",security:"安全",authentication:"認證",username:"使用者名稱",password:"密碼",fromEmail:"寄件信箱",fromName:"寄件人名稱",testConnection:"測試 SMTP 連線",testRecipient:"測試收件信箱",sendTest:"傳送測試郵件",sending:"傳送中...",save:"儲存設定",saving:"儲存中...",advancedAuth:"進階認證",advancedAuthEnabled:"進階認證已啟用",advancedAuthEnabledDesc:"基於信箱的使用者管理功能已啟用。新使用者將透過郵件收到自動產生的密碼，使用者可以透過忘記密碼功能重設密碼。",advancedAuthDisabled:"進階認證已停用",advancedAuthDisabledDesc:"啟用進階認證以啟用基於信箱的使用者管理功能。",enable:"啟用",disable:"停用",feature1:"密碼自動產生並透過郵件傳送給新使用者",feature2:"使用者可以使用使用者名稱或信箱登入",feature3:"忘記密碼功能可用",feature4:"管理員可以透過郵件重設使用者密碼",errors:{requiredFields:"請填寫所有必填欄位",usernameRequired:"啟用認證時需要使用者名稱",enterTestEmail:"請輸入測試信箱地址",smtpServerAndEmail:"測試前請填寫 SMTP 伺服器和寄件信箱",usernamePasswordRequired:"啟用認證時需要使用者名稱和密碼",configureSmtpFirst:"請先設定並測試 SMTP 設定",enableAuthFirst:"請先啟用身份驗證才能使用基於電子郵件的功能。"},success:{settingsSaved:"SMTP 設定儲存成功"},securityOptions:{starttls:"STARTTLS（連接埠 587）",ssl:"SSL/TLS（連接埠 465）",none:"無（連接埠 25）"},authOptions:{enabled:"已啟用",disabled:"已停用"}},appearance:"外觀",notifications:"通知",smartPlugs:"智慧插座",spoolman:"Spoolman",updates:"更新",language:"語言",languageDescription:"選擇您的首選語言",theme:"主題",themeLight:"淺色",themeDark:"深色",themeSystem:"跟隨系統",defaultView:"預設檢視",defaultViewDescription:"開啟應用程式時顯示的頁面",checkForUpdates:"檢查更新",autoUpdate:"自動更新",currentVersion:"目前版本",latestVersion:"最新版本",upToDate:"已是最新版本",updateAvailable:"有可用更新",notificationLanguage:"通知語言",notificationLanguageDescription:"推送通知的語言",bedCooledThreshold:"熱床冷卻閾值",bedCooledThresholdDescription:"列印後熱床被視為已冷卻的溫度",userNotificationsEnabled:"使用者通知",userNotificationsEnabledDescription:"啟用使用者通知選單和列印任務事件的郵件通知。需要進階身份驗證。",userNotificationsDisabledHint:"請啟用進階身份驗證以使用使用者通知。",notificationProviders:"通知提供者",addProvider:"新增提供者",editProvider:"編輯提供者",providerType:"提供者類型",testNotification:"測試通知",testSuccess:"測試通知傳送成功",testFailed:"傳送測試通知失敗",quietHours:"免打擾時間",quietHoursDescription:"在此時間段內不傳送通知",quietHoursStart:"開始",quietHoursEnd:"結束",events:{title:"通知事件",printStart:"列印開始",printComplete:"列印完成",printFailed:"列印失敗",printStopped:"列印停止",printProgress:"進度里程碑",printProgressDescription:"在 25%、50%、75% 時通知",printerOffline:"印表機離線",printerError:"印表機錯誤",filamentLow:"耗材不足",maintenanceDue:"維護到期",maintenanceDueDescription:"需要維護時通知"},smartPlug:{title:"智慧插座",add:"新增智慧插座",edit:"編輯智慧插座",name:"名稱",ipAddress:"IP 位址",linkedPrinter:"連結印表機",autoOn:"自動開啟",autoOnDescription:"列印開始時開啟",autoOff:"自動關閉",autoOffDescription:"列印完成後關閉",offDelay:"關閉延遲",offDelayMinutes:"列印後分鐘數",offDelayTemp:"當噴嘴溫度低於",currentState:"目前狀態",turnOn:"開啟",turnOff:"關閉"},filamentTracking:"耗材追蹤",filamentTrackingDesc:"選擇如何追蹤您的耗材。您可以使用內建庫存或連線外部 Spoolman 伺服器。",filamentChecks:"耗材檢查",disableFilamentWarnings:"停用耗材警告",disableFilamentWarningsDesc:"在列印或加入佇列時不顯示耗材不足警告",preferLowestFilament:"優先使用剩餘最少的耗材",preferLowestFilamentDesc:"當多個料盤匹配時，使用剩餘耗材最少的那個",trackingModeBuiltIn:"內建庫存",trackingModeBuiltInDesc:"包含 RFID 自動匹配和用量追蹤",trackingModeSpoolmanDesc:"外部耗材管理伺服器",builtInFeatureRfid:"自動檢測 AMS 中的拓竹 RFID 耗材",builtInFeatureUsage:"追蹤每次列印的耗材消耗",builtInFeatureCatalog:"管理耗材、顏色和 K 值設定檔案",builtInFeatureThirdParty:"第三方耗材可分配到庫存耗材",amsSyncButton:"從 AMS 同步重量",amsSyncTitle:"從 AMS 同步耗材重量",amsSyncMessage:"這將使用已連線印表機的目前 AMS 剩餘百分比值覆蓋所有庫存耗材重量。用於從損壞的重量資料中恢復。印表機必須線上。",amsSyncing:"同步中...",amsSyncSuccess:"已同步 {{synced}} 個耗材，跳過 {{skipped}} 個",amsSyncError:"從 AMS 同步重量失敗",spoolmanAmsSyncButton:"從 AMS 同步 Spoolman 重量",spoolmanAmsSyncTitle:"從 AMS 同步 Spoolman 耗材重量",spoolmanAmsSyncMessage:"這將根據已連線印表機的目前 AMS 剩餘百分比值更新所有 Spoolman 耗材重量。印表機必須線上。",spoolmanAmsSyncing:"同步中...",spoolmanAmsSyncSuccess:"已同步 {{synced}} 個 Spoolman 耗材，跳過 {{skipped}} 個",spoolmanAmsSyncError:"從 AMS 同步 Spoolman 重量失敗",spoolmanAmsSyncErrorUnreachable:"同步失敗（Spoolman 無法存取）",spoolmanAmsSyncErrorNotConfigured:"同步失敗（Spoolman 未設定）",spoolmanNotConfigured:"Spoolman 未設定",spoolmanFilamentCatalogTitle:"Spoolman 耗材目錄",spoolmanFilamentCatalogDesc:"來自 Spoolman 的耗材名稱和皮重。名稱和線軸重量可在此處編輯；其他屬性請直接在 Spoolman 中管理。",spoolmanUrl:"Spoolman URL",spoolmanUrlHint:"Spoolman 伺服器的 URL（例如 http://localhost:7912）",spoolmanConnected:"已連線",spoolmanDisconnected:"未連線",status:"狀態",connect:"連線",disconnect:"斷開",howSyncWorks:"同步工作原理",syncInfoRfidOnly:"僅同步帶有 RFID 的官方拓竹耗材",syncInfoAutoCreate:"首次同步時自動在 Spoolman 中建立新耗材",syncInfoThirdPartySkipped:"非拓竹耗材（第三方、重新填充的）將被跳過",linkingExistingSpools:"連結現有耗材",linkingExistingSpoolsDesc:'要將現有的 Spoolman 耗材連結到您的 AMS，請將滑鼠懸停在 AMS 槽位上並點選"連結到 Spoolman"。',syncMode:"同步模式",syncModeAuto:"自動",syncModeManual:"僅手動",syncModeAutoDesc:"偵測到更改時自動同步 AMS 資料",syncModeManualDesc:"僅在手動觸發時同步",syncAmsData:"同步 AMS 資料",syncAmsDataDesc:"手動將印表機 AMS 資料同步到 Spoolman",allPrinters:"所有印表機",noDefaultPrinter:"無預設（每次詢問）",sidebarOrder:"側邊欄順序",saveThumbnails:"儲存縮圖",captureFinishPhoto:"拍攝完成照片",noPrintersConfigured:"未設定印表機",archiveMode:{always:"始終建立歸檔條目",never:"從不建立歸檔條目",ask:"每次詢問"},checkForUpdatesLabel:"檢查更新",checkPrinterFirmware:"檢查印表機韌體",includeBetaUpdates:"包含測試版本",includeBetaUpdatesDesc:"檢查更新時通知測試版和預發布版本",enableRetry:"啟用重試",homeAssistantDescription:"透過 Home Assistant 控制智慧插座",environmentManagedLabel:"（環境變數管理）",autoEnabledViaEnv:"透過環境變數自動啟用",urlFromEnvReadOnly:"值由 HA_URL 環境變數設定（只讀）",tokenFromEnvReadOnly:"值由 HA_TOKEN 環境變數設定（只讀）",mqttConnectedTo:"已連線到",prometheusDescription:"以 Prometheus 格式暴露印表機資料",noSmartPlugsTitle:"未設定智慧插座",noSmartPlugsDescription:"新增基於 Tasmota 的智慧插座以追蹤能耗並自動化電源控制。",noProvidersTitle:"未設定提供者",noProvidersDescription:"新增提供者以接收警報。",noTemplatesAvailable:"無可用範本。重新啟動後端以載入預設範本。",apiPermissionView:"檢視印表機狀態和佇列",apiPermissionEdit:"新增和移除列印佇列中的項目",apiKeysEmptyTitle:"無 API 金鑰",apiKeysEmptyDescription:"建立 API 金鑰以與外部服務整合。",noUsersFound:"未找到使用者",noGroupsFound:"未找到群組",noGroupsAvailable:"無可用群組",passwordsDoNotMatch:"密碼不符",systemGroupWarning:"系統群組名稱不可更改",authDisabledTitle:"身份驗證已停用",authDisabledFeature1:"需要登入才能存取系統",authDisabledFeature2:"建立多個使用者並基於群組的權限管理",authDisabledFeature3:"使用 50+ 個細粒度權限控制存取",userHasCreated:"此使用者已建立：",userItemsQuestion:"您想如何處理這些項目？",deleteUserConfirm:"確定要刪除此使用者嗎？",actionCannotBeUndone:"此操作無法復原。",addFirstSmartPlug:"新增您的第一個智慧插座",providers:"提供者",log:"日誌",testAll:"全部測試",testResults:"測試結果",testPassedCount:"{{count}} 個透過",testFailedCount:"{{count}} 個失敗",messageTemplates:"訊息範本",messageTemplatesDescription:"自訂每個事件的通知訊息。",apiKeys:"API 金鑰",apiKeysDescription:"建立 API 金鑰用於外部整合和 Webhook。",createKey:"建立金鑰",apiKeyCreated:"API 金鑰建立成功",apiKeyCopyWarning:"請立即複製此金鑰 - 它不會再次顯示！",useInApiBrowser:"在 API 瀏覽器中使用",createNewApiKey:"建立新 API 金鑰",keyName:"金鑰名稱",keyNamePlaceholder:"例如：Home Assistant、OctoPrint",readStatus:"讀取狀態",readStatusDescription:"檢視印表機狀態和佇列",manageQueue:"管理佇列",manageQueueDescription:"新增和移除列印佇列中的項目",controlPrinter:"控制印表機",controlPrinterDescription:"暫停、繼續和停止列印",manageLibrary:"管理資料庫",manageLibraryDescription:"上傳、重新命名與刪除資料庫檔案；從 MakerWorld 匯入模型",manageInventory:"管理庫存",manageInventoryDescription:"建立、更新與刪除耗材盤與庫存記錄。SpoolBuddy 終端（NFC 掃描、秤讀取、終端系統指令）需要此權限。",libraryBadge:"資料庫",inventoryBadge:"庫存",cloudAccess:"允許雲端存取",cloudAccessDescription:"代表您讀取 Bambu Cloud 預設和耗材。需要登入 Bambu Cloud。",cloudBadge:"雲端",updateEnergyCost:"更新電價",updateEnergyCostDescription:"允許此金鑰向 /settings/electricity-price POST 新的每千瓦時電價。適用於 Home Assistant 動態電價自動化（Tibber、Octopus 等）。這是唯一可透過 API 金鑰寫入的設定欄位。",energyCostBadge:"能耗",legacyKey:"舊版",legacyKeyTooltip:"在按使用者所有權之前建立；需重建以使用雲端存取",unnamedKey:"未命名金鑰",lastUsed:"上次使用",read:"讀取",control:"控制",createFirstKey:"建立您的第一個金鑰",webhookEndpoints:"Webhook 端點",webhookApiKeyHint:"在 X-API-Key 請求頭中使用您的 API 金鑰。",webhook:{getAllStatus:"獲取所有印表機狀態",getSpecificStatus:"獲取特定印表機狀態",addToQueue:"新增到列印佇列",pausePrint:"暫停列印",resumePrint:"繼續列印",stopPrint:"停止列印"},apiBrowser:"API 瀏覽器",apiBrowserDescription:"瀏覽和測試所有可用的 API 端點。",apiKeyForTesting:"測試用 API 金鑰",apiKeyPlaceholder:"在此貼上您的 API 金鑰以測試需要認證的端點...",apiKeyHint:"此金鑰將作為 X-API-Key 請求頭隨請求傳送。",deleteApiKeyTitle:"刪除 API 金鑰",deleteApiKeyMessage:"確定要刪除此 API 金鑰嗎？使用此金鑰的所有整合將停止工作。",deleteKey:"刪除金鑰",amsDisplayThresholds:"AMS 顯示閾值",amsThresholdsDescription:"設定 AMS 濕度和溫度指示器的顏色閾值。",humidity:"濕度",goodGreen:"良好（綠色）",fairOrange:"一般（橙色）",aboveFairBad:"超過一般閾值顯示為紅色（差）",fairAlsoDryingThreshold:"此閾值也用於觸發自動乾燥",temperature:"溫度",goodBlue:"良好（藍色）",aboveFairHot:"超過一般閾值顯示為紅色（熱）",historyRetention:"歷史保留",keepSensorHistory:"保留感測器歷史",historyRetentionDescription:"較舊的濕度和溫度資料將被自動刪除",defaultPrintOptions:"預設列印選項",defaultPrintOptionsDescription:"設定新列印的預設選項值。可在列印對話方塊中逐次覆蓋。",defaultBedLevelling:"熱床調平",defaultBedLevellingDesc:"列印前自動調平熱床",defaultFlowCali:"流量校準",defaultFlowCaliDesc:"校準擠出流量",defaultVibrationCali:"振動校準",defaultVibrationCaliDesc:"減少振紋偽影",defaultLayerInspect:"首層檢測",defaultLayerInspectDesc:"AI首層檢測",defaultTimelapse:"縮時攝影",defaultTimelapseDesc:"錄製縮時攝影影片",staggeredStart:"錯開啟動",staggeredStartDescription:"多台印表機批次啟動時的預設群組大小與間隔。可在列印對話框中逐批覆寫。",plateClear:"熱床清空確認",requirePlateClear:"需要熱床清空確認",requirePlateClearDescription:"啟用後，排程器會在已完成列印的印表機上啟動佇列列印之前，等待每臺印表機的熱床清空確認。停用後，也會隱藏印表機卡片上的列印板狀態標記和「將列印板標記為已清理」按鈕。",gcodeInjection:"G-code注入",gcodeInjectionDescription:'為Farmloop、SwapMod、AutoClear和Printflow 3D等自動列印系統設定自訂G-code，在列印開始和/或結束時注入。程式碼片段按印表機型號設定，在佇列項目上啟用"注入G-code"時套用。',gcodeInjectionNoPrinters:"未找到印表機。新增印表機以設定G-code程式碼片段。",gcodeStartLabel:"開始G-code",gcodeEndLabel:"結束G-code",gcodeStartPlaceholder:"在列印開始前插入的G-code...",gcodeEndPlaceholder:"在列印結束後追加的G-code...",staggerGroupSize:"群組大小",staggerGroupSizeHelp:"每個群組要同時啟動的印表機數量",staggerInterval:"間隔（分鐘）",staggerIntervalHelp:"每個群組啟動之間的延遲",queueDrying:"自動乾燥",queueDryingDescription:"在佇列列印之間，印表機空閒時自動乾燥AMS耗材。使用上方的濕度閾值觸發乾燥。",queueDryingEnabled:"啟用自動乾燥",queueDryingEnabledDescription:"當印表機空閒且濕度超過閾值時，自動啟動AMS乾燥",queueDryingBlock:"等待乾燥完成",queueDryingBlockDescription:"阻止列印佇列直到乾燥完成。關閉時，列印優先於乾燥。",ambientDryingEnabled:"環境乾燥",ambientDryingEnabledDescription:"當空閒印表機的濕度超過閾值時自動乾燥耗材，無需佇列列印。",dryingPresets:"乾燥預設",dryingPresetsDescription:"每種耗材類型的溫度和時長。AMS 2 Pro使用較低溫度，AMS-HT支援較高溫度。",dryingFilament:"耗材",printModal:"列印對話方塊",expandCustomMapping:"預設展開自訂對應",expandCustomMappingDescription:"列印到多臺印表機時，預設展開顯示每臺印表機的 AMS 對應",authentication:"身份驗證",authEnabledDescription:"您的實例已透過使用者身份驗證保護",authDisabledDescription:"啟用以要求登入並管理使用者存取",authDisabledMessage:"啟用身份驗證以建立使用者帳戶、管理權限並保護您的 Bambuddy 實例。",enableAuthentication:"啟用身份驗證",currentUser:"目前使用者",changePassword:"修改密碼",admin:"管理員",users:"使用者",addUser:"新增使用者",groups:"群組",addGroup:"新增群組",system:"系統",noDescription:"無描述",userCount:"{{count}} 個使用者",permissionCount:"{{count}} 個權限",createUser:"建立使用者",username:"使用者名稱",enterUsername:"輸入使用者名稱",password:"密碼",enterPassword:"輸入密碼",passwordRequirements:"至少 8 個字元，包含一個大寫、一個小寫、一個數字和一個特殊字元。",confirmPassword:"確認密碼",confirmPasswordPlaceholder:"確認密碼",viewReleaseOnGitHub:"在 GitHub 上檢視發布",turnAllPlugsOn:"開啟所有插座",turnAllPlugsOff:"關閉所有插座",clearNotificationLogs:"清除通知日誌",clearLogsMessage:"這將永久刪除所有 30 天前的通知日誌。此操作無法復原。",clearLogs:"清除日誌",resetUiPreferences:"重設 UI 偏好",resetUiPreferencesMessage:"這將重設所有 UI 偏好為預設值：側邊欄順序、主題、儀表板佈局、檢視模式和排序偏好。您的印表機、歸檔和伺服器設定不會受到影響。清除後頁面將重新載入。",resetPreferences:"重設偏好",deleteGroupTitle:"刪除群組",deleteGroupMessage:"確定要刪除此群組嗎？此群組中的使用者將失去這些權限。",deleteGroup:"刪除群組",disableAuthenticationTitle:"停用身份驗證",disableAuthenticationMessage:"確定要停用身份驗證嗎？這將使您的 Bambuddy 實例無需登入即可存取。所有使用者將保留在資料庫中但身份驗證將被停用。",disableAuthentication:"停用身份驗證",configureBambuddy:"設定 Bambuddy",systemDefault:"系統預設",archiveSettings:"歸檔設定",newWindow:"新視窗",embeddedOverlay:"嵌入式疊加層",preferredSlicer:"首選切片軟體",preferredSlicerDescription:"選擇要用於開啟檔案的切片軟體",orcaslicerKnownIssuesWarning:"OrcaSlicer 2.3.2 / 2.4.0-dev 存在已知 CLI 錯誤，無法切片許多 Bambu 建立的 3MF — 見上游 issue #12426（繪製的多擠出機檔案 segfault）和 #13386（參數範圍嚴格驗證拒絕）。在上游修復發布之前，推薦使用 Bambu Studio。",useSlicerApi:"使用切片器 API",useSlicerApiDescription:"開啟時，「切片」操作開啟應用程式內切片器對話框並呼叫 slicer-API sidecar。關閉時（預設），透過 URI 方案交給桌面切片器。",slicerCard:"切片器",orcaslicerApiUrl:"OrcaSlicer sidecar URL",bambuStudioApiUrl:"Bambu Studio sidecar URL",slicerApiUrlDescription:"slicer-API sidecar 容器的 URL。留空以使用 SLICER_API_URL / BAMBU_STUDIO_API_URL 環境變數預設值。",slicerBundles:{title:"切片器捆綁包",description:'匯入從 BambuStudio 匯出的 Printer Preset Bundle (.bbscfg)（檔案 → 匯出 → 匯出預設捆綁包 → "Printer preset bundle"）。匯入後，切片請求可以按名稱從捆綁包中選擇預設，無需重新上傳 JSON 設定三元組。',uploadButton:"上傳捆綁包",uploading:"上傳中…",loading:"載入捆綁包中…",empty:"尚未匯入捆綁包。",summary:"{{processCount}} 個製程 · {{filamentCount}} 個耗材預設",delete:"刪除",uploadSuccess:"已匯入 {{name}}",uploadError:"上傳捆綁包失敗：{{message}}",deleteSuccess:"捆綁包已移除",deleteError:"刪除捆綁包失敗：{{message}}",confirmDeleteTitle:"移除此捆綁包？",confirmDeleteMessage:"引用「{{name}}」的切片請求將失敗，直到捆綁包重新匯入。"},externalCameras:"外部攝影機",costTracking:"成本追蹤",printsOnly:"僅列印",totalConsumption:"總消耗",dataManagement:"資料管理",storageUsage:"儲存使用情況",storageUsageDescription:"按類別的資料使用情況明細",storageUsageTotal:"總計",storageUsageErrors:"錯誤",storageUsageOtherBreakdown:"其他（包括靜態資源、腳本和設定檔案）",storageUsageSystem:"系統",storageUsageData:"資料",storageUsageUnavailable:"儲存使用資訊不可用",clearNotificationLogsDescription:"刪除 30 天前的通知日誌",resetUiPreferencesDescription:"重設側邊欄順序、主題、檢視模式和佈局偏好。印表機、歸檔和設定不受影響。",enableHomeAssistant:"啟用 Home Assistant",enableMqtt:"啟用 MQTT",useTls:"使用 TLS",enableMetricsEndpoint:"啟用指標端點",availableMetrics:"可用指標",editUser:"編輯使用者",deleteUserTitle:"刪除使用者",groupName:"群組名稱",leaveEmptyForAnonymous:"留空為匿名",leaveEmptyForNoAuth:"留空為無認證",enterNewPassword:"輸入新密碼",confirmNewPassword:"確認新密碼",enterGroupName:"輸入群組名稱",enterDescriptionOptional:"輸入描述（可選）",enterCurrentPassword:"輸入目前密碼",enterNewPasswordMin6:"輸入新密碼（至少 6 個字元）",toast:{keyCopied:"金鑰已複製到剪貼簿",copyFailed:"複製金鑰失敗",keyAddedToBrowser:"金鑰已新增到 API 瀏覽器",clearLogsFailed:"清除日誌失敗",uiPreferencesReset:"UI 偏好已重設。重新整理中...",authDisabled:"身份驗證已成功停用",authDisableFailed:"停用身份驗證失敗",apiKeyCreated:"API 金鑰已建立",apiKeyDeleted:"API 金鑰已刪除",userCreated:"使用者建立成功",userUpdated:"使用者更新成功",userDeleted:"使用者刪除成功",groupCreated:"群組建立成功",groupUpdated:"群組更新成功",groupDeleted:"群組刪除成功",fillRequiredFields:"請填寫所有必填欄位",passwordsDoNotMatch:"密碼不符",passwordTooShort:"密碼至少需要 8 個字元",passwordNeedsUppercase:"密碼必須至少包含一個大寫字母",passwordNeedsLowercase:"密碼必須至少包含一個小寫字母",passwordNeedsDigit:"密碼必須至少包含一個數字",passwordNeedsSpecial:"密碼必須至少包含一個特殊字元",enterGroupName:"請輸入群組名稱",settingsSaved:"設定已儲存",noPermissionUpdate:"您沒有權限變更設定",cameraSettingsSaved:"攝影機設定已儲存",enterCameraUrl:"請輸入攝影機 URL",passwordChanged:"密碼修改成功",connectionFailed:"連線失敗",testFailed:"測試失敗",cameraConnected:"攝影機已連線{{resolution}}"},testConnection:"測試連線",catalog:{spoolCatalog:"耗材目錄",spoolCatalogDescription:"按品牌/類型的空耗材重量。用於新增耗材時的自動重量查詢。",searchCatalog:"搜尋目錄...",addNewEntry:"新增新條目",namePlaceholder:"名稱（例如：Bambu Lab - 塑膠）",weight:"重量",type:"類型",default:"預設",custom:"自訂",noMatch:"沒有條目匹配您的搜尋",empty:"目錄中沒有條目",deleteEntry:"刪除條目",deleteConfirm:'確定要刪除"{{name}}"嗎？',resetCatalog:"重設目錄",resetConfirm:"重設目錄為預設值？這將移除所有自訂條目。",loadFailed:"載入耗材目錄失敗",nameWeightRequired:"名稱和重量為必填項",entryAdded:"條目已新增",addFailed:"新增條目失敗",entryUpdated:"條目已更新",updateFailed:"更新條目失敗",entryDeleted:"條目已刪除",deleteFailed:"刪除條目失敗",resetSuccess:"目錄已重設為預設值",resetFailed:"重設目錄失敗",exported:"已匯出 {{count}} 條",imported:"已匯入 {{added}} 條（跳過 {{skipped}} 條）",importFailed:"匯入失敗：無效的 JSON 格式",exportTooltip:"匯出目錄為 JSON",importTooltip:"從 JSON 匯入目錄",resetTooltip:"重設為預設值",selectedCount:"已選擇 {{count}} 項",deleteSelected:"刪除所選",bulkDeleteConfirm:"確定要刪除 {{count}} 個條目嗎？",bulkDeleted:"已刪除 {{count}} 個條目",bulkDeleteFailed:"刪除條目失敗",material:"材料",spoolWeight:"線軸重量",color:"顏色",updateSpoolWeight:"更新線軸重量",filamentUpdated:"耗材已更新",filamentUpdateFailed:"更新耗材失敗",filamentUpdateInvalid:"耗材資料無效",keepExistingSpoolWeight:"保留現有線軸的舊重量",keepExistingSpoolWeightDesc:"已使用此耗材類型建立的線軸保留舊的皮重。新線軸使用更新後的值。",applyToAllSpools:"套用至所有線軸",applyToAllSpoolsDesc:"此耗材類型的所有重量計算立即使用新的皮重。"},colorCatalog:{title:"顏色目錄",description:"按製造商/材料的耗材顏色。用於新增耗材時的自動顏色查詢。",searchColors:"搜尋顏色...",allManufacturers:"所有製造商",addNewColor:"新增新顏色",manufacturer:"製造商",colorName:"顏色名稱",hex:"十六進位",materialOptional:"材料（可選）",showing:"顯示 {{filtered}} / {{total}} 種顏色",noMatch:"沒有顏色匹配您的搜尋",empty:"目錄中沒有顏色",deleteColor:"刪除顏色",deleteConfirm:'確定要刪除"{{name}}"嗎？',resetCatalog:"重設顏色目錄",resetConfirm:"重設目錄為預設值？這將移除所有自訂顏色。",sync:"同步",starting:"啟動中...",syncTooltip:"從 FilamentColors.xyz 同步（2000+ 種顏色，可能需要一分鐘）",loadFailed:"載入顏色目錄失敗",fieldsRequired:"製造商、顏色名稱和十六進位顏色為必填項",colorAdded:"顏色已新增",addFailed:"新增顏色失敗",colorUpdated:"顏色已更新",updateFailed:"更新顏色失敗",colorDeleted:"顏色已刪除",deleteFailed:"刪除顏色失敗",resetSuccess:"顏色目錄已重設為預設值",resetFailed:"重設目錄失敗",syncUpToDate:"已是最新（檢查了 {{count}} 種顏色）",syncComplete:"新增了 {{added}} 種新顏色（{{skipped}} 種已存在）",syncError:"同步錯誤",syncFailed:"從 FilamentColors.xyz 同步失敗",exported:"已匯出 {{count}} 種顏色",imported:"已匯入 {{added}} 種顏色（跳過 {{skipped}} 種）",importFailed:"匯入失敗：無效的 JSON 格式",selectedCount:"已選擇 {{count}} 項",deleteSelected:"刪除所選",bulkDeleteConfirm:"確定要刪除 {{count}} 種顏色嗎？",bulkDeleted:"已刪除 {{count}} 種顏色",bulkDeleteFailed:"刪除顏色失敗"},dateFormat:"日期格式",dateFormatUs:"美式 (MM/DD/YYYY)",dateFormatEu:"歐式 (DD/MM/YYYY)",dateFormatIso:"ISO (YYYY-MM-DD)",timeFormat:"時間格式",timeFormat12:"12小時制 (3:30 PM)",timeFormat24:"24小時制 (15:30)",defaultPrinter:"預設印表機",defaultPrinterDescription:"為上傳、重印和其他操作預選此印表機。",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"拖曳側邊欄項目以重新排序。在此處重設為預設順序。",setDefault:"設為預設",sidebarOrderSetDefaultHint:"設為預設將目前選單順序套用於尚未自訂的使用者。",sidebarDefaultSet:"已設定預設選單順序。",sidebarDefaultCleared:"已清除預設選單順序。",sidebarDefaultFailed:"設定預設選單順序失敗。",reset:"重設",darkMode:"深色模式",lightMode:"淺色模式",active:"(目前)",background:"背景",accent:"強調色",style:"樣式",bgNeutral:"中性",bgWarm:"暖色",bgCool:"冷色",bgOled:"OLED 純黑",bgSlate:"石板藍",bgForest:"森林綠",accentGreen:"綠色",accentTeal:"青色",accentBlue:"藍色",accentOrange:"橙色",accentPurple:"紫色",accentRed:"紅色",styleClassic:"經典",styleGlow:"發光",styleVibrant:"鮮豔",themeToggleHint:"使用側邊欄中的圖示在深色、淺色和系統模式之間切換。",autoArchivePrints:"自動歸檔列印",autoArchiveDescription:"列印完成時自動儲存3MF檔案",saveThumbnailsDescription:"從3MF檔案中提取並儲存預覽影像",captureFinishPhotoDescription:"列印完成時從印表機攝影機拍照。Bambuddy 會在列印期間錄製一段短縮時攝影，以便從熱床下降前的瞬間取得照片；如果您為本次列印啟用了縮時攝影，檔案將保留，否則會在拍照完成後自動刪除。",ffmpegNotInstalled:"未安裝ffmpeg",ffmpegRequired:"攝影機捕獲需要ffmpeg。透過 <brew>brew install ffmpeg</brew>（macOS）或 <apt>apt install ffmpeg</apt>（Linux）安裝。",camera:"攝影機",cameraViewMode:"攝影機檢視模式",cameraOverlayDescription:"攝影機在主螢幕上以可調大小的覆蓋層開啟",cameraWindowDescription:"攝影機在單獨的瀏覽器視窗中開啟",externalCamerasDescription:"設定外部攝影機以替換內建印表機攝影機。支援MJPEG流、RTSP、HTTP快照和USB攝影機（V4L2）。啟用後，外部攝影機將用於即時檢視和完成照片。",cameraPlaceholderUsb:"裝置路徑 (/dev/video0)",cameraPlaceholderUrl:"攝影機URL (rtsp://... 或 http://...)",cameraTypeMjpeg:"MJPEG 流",cameraTypeRtsp:"RTSP 流",cameraTypeSnapshot:"HTTP 快照",cameraTypeUsb:"USB 攝影機 (V4L2)",cameraSnapshotUrl:"快照 URL（選用）",cameraSnapshotUrlPlaceholder:"http://192.168.1.61:1984/api/frame.jpeg?src=printer",cameraSnapshotUrlHelp:"用於通知縮圖、完成照片、層縮時攝影影格和列印板偵測的單一影格 URL。縮時攝影和列印板偵測各自需要自己的每印表機切換 — 此 URL 只是它們啟用時拉取的影像來源。留空以從上方即時串流擷取。適用於 go2rtc（/api/frame.jpeg）和具有專用快照端點的 IP 攝影機。",cameraRotation:"旋轉",test:"測試",connected:"已連線",disconnected:"未連線",currency:"貨幣",defaultFilamentCost:"預設耗材成本（每公斤）",electricityCost:"每千瓦時電費",energyDisplayMode:"能源顯示模式",energyModePrintDescription:"儀表板顯示列印期間使用的能源總和",energyModeTotalDescription:"儀表板顯示智慧插座的累計能源",fileManager:"檔案管理器",createArchiveEntry:"列印時建立歸檔條目",createArchiveEntryDescription:"從檔案管理器列印時，可選擇建立歸檔條目",lowDiskSpaceWarning:"磁碟空間不足警告",lowDiskSpaceDescription:"當可用磁碟空間低於此閾值時顯示警告",printerFirmware:"印表機韌體",checkFirmwareDescription:"檢查Bambu Lab的印表機韌體更新",bambuddySoftware:"Bambuddy 軟體",autoCheckDescription:"啟動時自動檢查新版本",checkNow:"立即檢查",updateAvailableVersion:"可用更新：v{{version}}",releaseNotes:"發布說明",updateViaDocker:"透過 Docker Compose 更新：",updateViaHomeAssistant:"更新由 Home Assistant Supervisor 管理。請在 Home Assistant 中開啟 設定 → 附加元件 → Bambuddy 以安裝新版本。",installUpdate:"安裝更新",latestVersionRunning:"您正在執行最新版本",failedToCheckUpdates:"檢查更新失敗：{{error}}",backupRestore:"備份與恢復",backupRestoreDescription:"匯出/匯入設定並設定GitHub 備份",goToBackup:"前往備份",externalUrl:"外部URL",externalUrlDescription:"Bambuddy可存取的外部URL。用於通知影像和外部整合。",bambuddyUrl:"Bambuddy URL",externalUrlHint:"包含協定和連接埠（例如：http://192.168.1.100:8000）",ftpRetry:"FTP重試",ftpRetryDescription:"當印表機Wi-Fi 不穩定時重試FTP操作。適用於3MF下載、列印上傳、縮時攝影下載和韌體更新。",autoRetryDescription:"自動重試失敗的FTP操作",retryAttempts:"重試次數",retryDelay:"重試延遲",connectionTimeout:"連線超時",time_one:"{{count}} 次",time_other:"{{count}} 次",second_one:"{{count}} 秒",second_other:"{{count}} 秒",nSeconds:"{{count}} 秒",increaseForWeakWifi:"對Wi-Fi 訊號弱的印表機增加此值",homeAssistant:"Home Assistant",homeAssistantFullDescription:"連線到Home Assistant，透過HA REST API控制智慧插座。支援switch、light、input_boolean和script實體。",homeAssistantUrl:"Home Assistant URL",longLivedAccessToken:"長期存取權杖",haTokenHint:"在HA中建立權杖：個人資料 → 長期存取權杖 → 建立權杖",connectionSuccessful:"連線成功",connectionFailed:"連線失敗",haConnectionSuccess:"已成功連線到Home Assistant。",haConnectionFailed:"連線Home Assistant失敗。",mqttPublishing:"MQTT發布",mqttDescription:"將BamBuddy事件發布到外部MQTT代理，用於與Node-RED、Home Assistant和其他自動化系統整合。",mqttEnableDescription:"向外部MQTT代理發布事件",brokerHostname:"代理主機名稱",port:"連接埠",usernameOptional:"使用者名稱（可選）",passwordOptional:"密碼（可選）",topicPrefix:"主題前綴",topicPrefixHint:"主題格式：{{prefix}}/printers/<serial>/status 等",prometheusMetrics:"Prometheus 指標",prometheusEndpointDescription:"在 <code>/api/v1/metrics</code> 公開印表機指標，用於Prometheus/Grafana監控。",bearerTokenOptional:"Bearer權杖（可選）",bearerTokenHint:"設定後，請求必須包含 <code>Authorization: Bearer <token></code>",metricsConnectionStatus:"連線狀態",metricsPrinterState:"印表機狀態（空閒/列印中等）",metricsPrintProgress:"列印進度 0-100%",metricsBedTemp:"熱床溫度",metricsNozzleTemp:"噴嘴溫度",metricsPrintsTotal:"按結果分類的總列印數",metricsMore:"...以及更多（層數、風扇、佇列、耗材用量）",smartPlugsDescription:"連線智慧插座（Tasmota或Home Assistant）以自動化電源控制並追蹤印表機的能源使用情況。",allOn:"全部開啟",allOff:"全部關閉",addSmartPlug:"新增智慧插座",energySummary:"能源概要",currentPower:"目前功率",plugsOnline:"{{reachable}}/{{total}} 個插座線上",today:"今天",yesterday:"昨天",total:"總計",enablePlugsForSummary:"啟用插座以檢視能源概要",addNotificationProvider:"新增",systemBadge:"(系統)",creating:"建立中...",changing:"修改中...",deleteUserAndItems:"刪除使用者及其所有項目",deleteUserKeepItems:"刪除使用者，保留項目（將變為無主項目）",ok:"確定",twoFa:{totpTitle:"身份驗證器 App (TOTP)",totpDesc:"使用 Google Authenticator、Aegis 或 Authy 等 App。",emailOtpTitle:"郵件 OTP",emailOtpDesc:"登入時向 {{email}} 傳送一次性驗證碼。",emailOtpNoEmail:"請先為帳戶新增信箱地址以啟用此方式。",addEmailFirst:"您的帳戶沒有信箱地址，請聯絡管理員新增。",setupTotp:"設定身份驗證器 App",setupAuthApp:"設定身份驗證器 App",setupInstructions:"使用身份驗證器 App 掃描QR Code，然後輸入驗證碼確認。",manualEntry:"無法掃描？請手動輸入此金鑰：",scannedContinue:"已掃描 — 繼續",enterCodeToConfirm:"請輸入身份驗證器 App 中的6位驗證碼以確認設定。",activate:"啟用",disableTotp:"停用身份驗證器",disableConfirmHint:"請輸入有效的 TOTP 碼或備用碼來停用身份驗證器。",totpDisabled:"身份驗證器 App 已停用。",emailOtpEnabled:"郵件 OTP 已啟用。",emailOtpDisabled:"郵件 OTP 已停用。",smtpRequired:"請先設定並測試SMTP設定。",invalidCode:"無效驗證碼，請重試。",enableEmailOtp:"啟用郵件 OTP",disableEmailOtp:"停用郵件 OTP",emailSetupEnterCode:"驗證碼已傳送至您的信箱地址。請在下方輸入以確認您擁有此信箱。",verifyAndEnable:"驗證並啟用",emailDisablePasswordHint:"請輸入您的帳戶密碼以確認停用郵件 OTP。",passwordPlaceholder:"輸入您的密碼",backupCodesTitle:"儲存備用碼",backupCodesWarning:"請將這些碼儲存在安全的地方。每個碼只能使用一次，且不會再次顯示。",backupCodesRemaining:"剩餘 {{count}} 個備用碼",savedCodes:"已儲存",regenBackup:"重新產生備用碼",regenBackupHint:"輸入目前 TOTP 碼以產生 10 個新備用碼，所有現有備用碼將失效。",newBackupCodes:"新備用碼",linkedAccounts:"已連結的 SSO 帳戶",linkedAccountsDesc:"以下外部身份提供者已與您的帳戶連結。",oidcUnlinked:"帳戶已解除連結。"},oidc:{title:"SSO / OIDC 提供者",desc:"設定 OpenID Connect 提供者以實現單點登入。",addProvider:"新增提供者",newProvider:"新提供者",empty:"尚未設定 OIDC 提供者。",created:"提供者已建立。",updated:"提供者已更新。",deleted:"提供者已刪除。",refreshIcon:"重新整理圖示",removeIcon:"移除圖示",iconRefreshed:"圖示已重新整理。",iconRemoved:"圖示已移除。",iconFetchFailed:"無法從提供者 URL 取得圖示。",deleteTitle:"刪除提供者",deleteMessage:'刪除"{{name}}"？所有連結帳戶將斷開連線。',form:{name:"顯示名稱",issuerUrl:"頒發者 URL",clientId:"客戶端 ID",clientSecret:"客戶端金鑰",scopes:"作用域",iconUrl:"圖示 URL（可選）",enabled:"已啟用",autoCreate:"自動建立使用者",autoCreateDesc:"首次登入時自動建立本機帳戶。",autoLink:"自動連結已有帳戶",autoLinkDesc:"首次登入時透過信箱匹配現有本機帳戶並自動連結。",emailClaim:"電子郵件聲明",emailClaimDesc:"用作電子郵件身份的 JWT 聲明。Azure Entra ID 請使用 'preferred_username' 或 'upn'（不發送 email_verified）。僅使用可信的聲明名稱。",emailClaimPlaceholder:"電子郵件",emailClaimCustomClaimAutoLinkWarning:"自訂宣告僅在值由租用戶管理時（例如 Azure Entra ID 的 upn / preferred_username）對自動關聯安全。如果您的 IdP 允許使用者自我宣告此宣告，請勿啟用自動關聯。",requireEmailVerified:"要求電子郵件已驗證",requireEmailVerifiedDesc:"僅在提供商將電子郵件聲明標記為已驗證時才接受。",requireEmailVerifiedWarning:"警告：將在未經驗證的情況下接受電子郵件。僅對受信任的提供商使用。",requireEmailVerifiedAutoLink:"請先停用自動連結以變更此設定。",secretHint:"留空以保留目前",secretPlaceholder:"新金鑰",defaultGroup:"預設群組",defaultGroupDesc:"自動建立使用者時分配的群組。未設定時回退到 Viewers。",defaultGroupViewersFallback:"Viewers（預設）"}},encryption:{title:"MFA 加密狀態",enabledFromEnv:"已啟用靜態加密（金鑰來自 MFA_ENCRYPTION_KEY 環境變數）",enabledFromFile:"已啟用靜態加密（金鑰從資料目錄載入）",enabledGenerated:"使用自動產生的金鑰啟用靜態加密",notConfigured:"未設定靜態加密",notConfiguredDesc:"TOTP 機密和 OIDC client_secrets 以明文儲存。請設定 MFA_ENCRYPTION_KEY 或使用可寫資料目錄重新啟動 Bambuddy 以自動產生。",allEncrypted:"所有 MFA 機密皆已靜態加密。",legacyRowsLabel:"舊版明文列",encryptedRowsLabel:"已加密列",legacyRowsWarning:"偵測到 {{count}} 個舊版明文列。請重新儲存 OIDC 供應商或重新註冊使用者的身份驗證器應用程式，以遷移到加密儲存。",backupHint:"自動產生的金鑰儲存在 DATA_DIR/.mfa_encryption_key 中，並包含在本機備份 ZIP 中。請保護備份安全或顯式設定 MFA_ENCRYPTION_KEY。",decryptionBrokenTitle:"加密金鑰遺失",decryptionBrokenError:"無法解密 {{count}} 條加密記錄，因為加密金鑰不再可用。請還原先前的 MFA_ENCRYPTION_KEY 或 DATA_DIR/.mfa_encryption_key 以恢復存取。",migrationErrorWarning:"{{count}} 行舊資料在啟動時未能重新加密。請檢查伺服器日誌並重新啟動 Bambuddy 以重試。"}},notification:{printStarted:{title:"列印已開始",body:"{{printer}}：{{filename}} 已開始列印"},printCompleted:{title:"列印已完成",body:"{{printer}}：{{filename}} 已成功完成"},printFailed:{title:"列印失敗",body:"{{printer}}：{{filename}} 列印失敗"},printStopped:{title:"列印已停止",body:"{{printer}}：{{filename}} 已停止"},printProgress:{title:"列印進度",body:"{{printer}}：{{filename}} 已完成 {{percent}}%"},printerOffline:{title:"印表機離線",body:"{{printer}} 已離線"},printerError:{title:"印表機錯誤",body:"{{printer}}：{{error}}"},filamentLow:{title:"耗材不足",body:"{{printer}}：耗材即將用完"},maintenanceDue:{title:"維護到期",body:"{{printer}}：{{items}} 需要關注"}},errors:{generic:"出了點問題",networkError:"網路錯誤。請檢查您的連線。",notFound:"未找到",unauthorized:"未授權",serverError:"伺服器錯誤",validationError:"請檢查您的輸入",printerConnectionFailed:"連線印表機失敗",saveFailed:"儲存更改失敗",deleteFailed:"刪除失敗",loadFailed:"載入資料失敗"},hmsErrors:{title:"錯誤 - {{name}}",noErrors:"無錯誤",viewOnWiki:"在拓竹 Wiki 上檢視",clearInstructions:"在印表機上清除錯誤以在此處消除它們。",clearErrors:"清除錯誤",clearSuccess:"HMS 錯誤已清除",clearFailed:"清除 HMS 錯誤失敗"},mqttDebug:{title:"MQTT 偵錯日誌",searchPlaceholder:"搜尋主題或負載...",noMessages:"尚未紀錄訊息",startLoggingHint:'點選"開始紀錄"以開始捕獲 MQTT 訊息',noMessagesMatch:"沒有訊息匹配您的篩選條件",adjustFilterHint:"嘗試調整您的搜尋或篩選條件",incoming:"傳入",outgoing:"傳出",loggingStopped:"紀錄已停止",loggingActive:"紀錄中 - 訊息將自動重新整理",startLogging:"開始紀錄",stopLogging:"停止紀錄",clearLog:"清除日誌",topic:"主題",timestamp:"時間戳",direction:"方向",all:"全部"},printerFiles:{title:"檔案管理器",storageUsed:"已用：",storageFree:"剩餘：",filterPlaceholder:"篩選檔案...",deleteButton:"刪除",deleteFiles:"刪除 {{count}} 個檔案",deleteFileConfirm:'刪除"{{name}}"？此操作無法復原。',deleteFilesConfirm:"刪除 {{count}} 個選中的檔案？此操作無法復原。",noFiles:"印表機上沒有檔案",loadingFiles:"載入檔案中...",failedToLoad:"載入檔案失敗",toast:{filesDeleted:"已刪除 {{count}} 個檔案",deleteFailed:"刪除失敗：{{error}}"}},confirm:{delete:"確定要刪除嗎？",unsavedChanges:"您有未儲存的更改。確定要離開嗎？",clearQueue:"確定要清空佇列嗎？"},login:{title:"Bambuddy 登入",subtitle:"登入您的帳戶",username:"使用者名稱",usernamePlaceholder:"輸入您的使用者名稱",usernameOrEmail:"使用者名稱或信箱",usernameOrEmailPlaceholder:"使用者名稱或 @ 信箱",password:"密碼",passwordPlaceholder:"輸入您的密碼",signIn:"登入",signingIn:"登入中...",rememberMe:"記住我",forgotPassword:"忘記密碼？",loginSuccess:"登入成功",loginFailed:"登入失敗",enterCredentials:"請輸入使用者名稱和密碼",enterEmail:"請輸入您的電子郵件地址",oidcLoginFailed:"OIDC 登入失敗",oidcErrors:{providerError:"身份提供者返回了一個錯誤",missingParameters:"OIDC 回呼缺少必要引數",invalidState:"OIDC 狀態無效或已被使用",stateExpired:"OIDC 登入會話已過期，請重試",providerNotFound:"未找到 OIDC 提供者",discoveryFailed:"無法獲取 OIDC 探索文件",invalidDiscovery:"OIDC 探索文件無效",networkError:"OIDC 權杖交換時出現網路錯誤",badResponse:"OIDC 權杖交換時收到意外回應",noIdToken:"OIDC 提供者未返回 ID 權杖",validationFailed:"OIDC 權杖驗證失敗",nonceMismatch:"OIDC nonce 不符，可能存在重放攻擊",missingSubClaim:"OIDC 權杖缺少 sub 宣告",noLinkedAccount:"沒有與此 OIDC 身份連結的本機帳戶",accountInactive:"您的帳戶已被停用",userResolutionFailed:"無法解析您的帳戶",internalError:"OIDC 登入過程中發生內部錯誤",tokenExchangeFailed:"OIDC 權杖交換失敗"},forgotPasswordTitle:"忘記密碼",forgotPasswordMessage:"如果您忘記了密碼，請聯絡系統管理員進行重設。",forgotPasswordEmailMessage:"輸入您的信箱地址，我們將向您傳送新密碼。",emailAddress:"信箱地址",emailPlaceholder:"your.email@example.com",cancel:"取消",sending:"傳送中...",sendResetEmail:"傳送重設郵件",howToReset:"如何重設密碼：",resetStep1:"聯絡您的 Bambuddy 管理員",resetStep2:"請他們在使用者管理中重設您的密碼",resetStep3:"他們可以為您設定一個臨時密碼",resetStep4:"使用新密碼登入並在設定中修改密碼",gotIt:"知道了",resetPassword:{title:"設定新密碼",subtitle:"請在下方輸入並確認您的新密碼。",newPassword:"新密碼",newPasswordPlaceholder:"至少 8 個字元",confirmPassword:"確認密碼",confirmPasswordPlaceholder:"重複輸入新密碼",saving:"儲存中…",submit:"設定新密碼",backToLogin:"回到登入",passwordsDoNotMatch:"密碼不符",passwordTooShort:"密碼至少需要 8 個字元",resetFailed:"密碼重設失敗。連結可能已過期。"},twoFA:{title:"兩步驗證",subtitle:"您的帳戶已啟用兩步驗證。請在下方輸入驗證碼。",methodAuthenticator:"身份驗證器 App",methodEmail:"信箱驗證碼",methodBackup:"備用恢復碼",instructionsTotp:"請開啟您的身份驗證器 App，輸入 Bambuddy 的 6 位驗證碼。",instructionsEmail:"6 位驗證碼已傳送至您的信箱，有效期為 10 分鐘。",instructionsEmailNotSent:"點選下方按鈕，透過郵件獲取驗證碼。",instructionsBackup:"請輸入您的一個 8 位備用恢復碼。每個恢復碼只能使用一次。",sendCodeButton:"傳送信箱驗證碼",sendingCode:"傳送中...",resendCode:"重新傳送驗證碼",codeLabel:"驗證碼",backupCodeLabel:"備用恢復碼",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"驗證",verifyingButton:"驗證中...",backToLogin:"← 回到登入頁面",orContinueWith:"或透過以下方式登入",signInWith:"使用 {{provider}} 登入",enterCode:"請輸入驗證碼",sendCodeFailed:"驗證碼傳送失敗",invalidCode:"無效驗證碼，請重試。"}},setup:{title:"Bambuddy 設定",subtitle:"為您的 Bambuddy 實例設定身份驗證",enableAuth:"啟用身份驗證",adminAccount:"管理員帳戶",adminAccountDesc:"如果管理員使用者已存在，將使用現有管理員帳戶啟用身份驗證。如需使用現有管理員，請將下方欄位留空，或輸入新憑據建立新管理員使用者。",adminUsername:"管理員使用者名稱",adminPassword:"管理員密碼",optionalIfAdminExists:"（如管理員使用者已存在則為可選）",adminUsernamePlaceholder:"輸入管理員使用者名稱（可選）",adminPasswordPlaceholder:"輸入管理員密碼（可選）",confirmPassword:"確認密碼",confirmPasswordPlaceholder:"確認管理員密碼",settingUp:"設定中...",completeSetup:"完成設定",toast:{authEnabledAdminCreated:"身份驗證已啟用並建立了管理員使用者",authEnabledExistingAdmins:"使用現有管理員使用者啟用了身份驗證",setupCompleted:"設定完成",enterBothCredentials:"請輸入管理員使用者名稱和密碼，或將兩者留空以使用現有管理員使用者",passwordsDoNotMatch:"密碼不符",passwordTooShort:"密碼至少需要 6 個字元"}},changePassword:{title:"修改密碼",currentPassword:"目前密碼",currentPasswordPlaceholder:"輸入目前密碼",newPassword:"新密碼",newPasswordPlaceholder:"輸入新密碼（至少 6 個字元）",confirmPassword:"確認新密碼",confirmPasswordPlaceholder:"確認新密碼",passwordsDoNotMatch:"密碼不符",passwordTooShort:"密碼至少需要 6 個字元",changing:"修改中...",success:"密碼修改成功",failed:"密碼修改失敗"},plateAlert:{title:"列印已暫停！",message:"在列印板上偵測到物體。列印已自動暫停。請清理列印板並繼續列印。",understand:"我知道了"},camera:{title:"攝影機檢視",invalidPrinterId:"無效的印表機 ID",live:"即時",snapshot:"快照",restartStream:"重新啟動流",refreshSnapshot:"重新整理快照",fullscreen:"全螢幕",exitFullscreen:"離開全螢幕",connectingToCamera:"連線攝影機中...",capturingSnapshot:"拍攝快照中...",connectionLost:"連線已斷開",connectionFailed:"攝影機連線失敗",reconnecting:"{{countdown}} 秒後重新連線...（第 {{attempt}}/{{max}} 次嘗試）",reconnectNow:"立即重新連線",cameraUnavailable:"攝影機不可用",cameraUnavailableDesc:"請確保印表機已通電並已連線。",noCamera:"無可用攝影機",retry:"重試",cameraStream:"攝影機流",zoomOut:"縮小",zoomIn:"放大",resetZoom:"重設縮放",recording:"錄製中",startRecording:"開始錄製",stopRecording:"停止錄製",chamberLight:"切換腔室燈",unavailable:"攝影機無法使用",diagnose:{button:"診斷",modalTitle:"攝影機診斷",running:"正在執行診斷...",runFailed:"無法執行診斷: {{error}}",retry:"重新執行",stage:{tcp_reachable:"網路可達性",first_frame:"畫面擷取",live_stream_active:"直播串流進行中"},summary:{all_ok:"攝影機運作正常。診斷已成功完成所有階段。",live_stream_active_healthy:"攝影機正在傳輸最新畫面 — 無需測試。",printer_unreachable:"無法存取印表機。請檢查 IP 位址、網路連線以及印表機是否已開機。",camera_port_closed:"印表機可存取，但攝影機連接埠已關閉。請確認印表機設定中已啟用僅 LAN 模式與開發者模式。",no_frame:"已連線到攝影機，但未收到畫面。請重試或檢查印表機設定中攝影機是否已啟用。",unknown_failure:"攝影機診斷因不明原因失敗。請查看支援日誌了解詳情。"},meta:{protocol:"協定",port:"連接埠",profile:"設定檔"}}},groups:{title:"群組管理",subtitle:"管理存取控制的權限群組",backToSettings:"返回設定",createGroup:"建立群組",noPermission:"您沒有存取此頁面的權限。",system:"系統",noDescription:"無描述",usersCount:"{{count}} 個使用者",permissionsCount:"{{count}} 個權限",edit:"編輯",delete:"刪除",toast:{created:"群組建立成功",updated:"群組更新成功",deleted:"群組刪除成功",enterGroupName:"請輸入群組名稱"},modal:{editGroup:"編輯群組",createGroup:"建立群組",cancel:"取消",saving:"儲存中...",creating:"建立中...",saveChanges:"儲存更改"},form:{groupName:"群組名稱",groupNamePlaceholder:"輸入群組名稱",systemGroupWarning:"系統群組名稱不可更改",description:"描述",descriptionPlaceholder:"輸入描述（可選）",permissions:"權限（已選 {{count}} 個）"},deleteModal:{title:"刪除群組",message:"確定要刪除此群組嗎？此群組中的使用者將失去這些權限。",confirm:"刪除群組"},editor:{title:"編輯群組",createTitle:"建立群組",search:"搜尋權限...",selectAll:"全選",clearAll:"清除全部",permissionsSelected:"已選 {{count}} 個",noResults:"沒有權限匹配您的搜尋"}},users:{title:"使用者管理",subtitle:"管理使用者及其對 Bambuddy 實例的存取",backToSettings:"返回設定",createUser:"建立使用者",noPermission:"您沒有存取此頁面的權限。",admin:"管理員",noGroups:"無群組",active:"活躍",inactive:"非活躍",edit:"編輯",delete:"刪除",system:"系統",noGroupsAvailable:"無可用群組",table:{username:"使用者名稱",groups:"群組",status:"狀態",actions:"操作"},toast:{created:"使用者建立成功",updated:"使用者更新成功",deleted:"使用者刪除成功",fillRequired:"請填寫所有必填欄位",passwordsDoNotMatch:"密碼不符",passwordTooShort:"密碼至少需要 6 個字元",ldapProvisioned:"已建立 LDAP 使用者「{{username}}」"},modal:{createUser:"建立使用者",editUser:"編輯使用者",cancel:"取消",creating:"建立中...",saving:"儲存中...",saveChanges:"儲存更改",advancedAuthSubtitle:"使用進階認證",tabsAriaLabel:"使用者來源",localTab:"本機",ldapTab:"LDAP",ldapSearchLabel:"搜尋目錄",ldapSearchPlaceholder:"輸入使用者名稱、姓名或電子郵件...",ldapMinChars:"輸入至少 2 個字元以搜尋",ldapTypeToSearch:"開始輸入以搜尋 LDAP 目錄",ldapSearching:"搜尋目錄中...",ldapNoResults:"目錄中沒有符合的使用者",ldapSearchError:"目錄搜尋失敗。請檢查 LDAP 伺服器狀態。",ldapAlreadyProvisioned:"已建立",ldapSelectedLabel:"已選",ldapProvision:"建立使用者",ldapProvisioning:"建立中...",ldapErrorProvision:"建立失敗。請檢查 LDAP 伺服器狀態後重試。"},form:{username:"使用者名稱",usernamePlaceholder:"輸入使用者名稱",email:"信箱",emailPlaceholder:"user@example.com",password:"密碼",passwordPlaceholder:"輸入密碼",confirmPassword:"確認密碼",confirmPasswordPlaceholder:"確認密碼",newPasswordPlaceholder:"輸入新密碼",confirmNewPasswordPlaceholder:"確認新密碼",leaveBlankToKeep:"留空以保持目前值",groups:"群組",optional:"可選",autoGeneratedPassword:"將自動產生安全密碼並透過郵件傳送給使用者。",passwordManagedByAdvancedAuth:'密碼由進階認證管理。使用"重設密碼"透過郵件向使用者傳送新密碼。',resetPassword:"重設密碼",resettingPassword:"重設密碼中..."},deleteModal:{title:"刪除使用者",message:"確定要刪除此使用者嗎？此操作無法復原。",confirm:"刪除使用者"}},streamOverlay:{title:"流疊加層",invalidPrinterId:"無效的印表機 ID",cameraStream:"攝影機流",progress:"進度",eta:"預計完成時間",printerIdle:"印表機空閒",printerOffline:"印表機離線",status:{printing:"列印中",paused:"已暫停",finished:"已完成",failed:"失敗",idle:"空閒",unknown:"未知"}},profiles:{title:"設定檔案",subtitle:"管理您的切片預設和壓力推進校準",tabs:{bambuCloud:"Bambu Cloud",orcaCloud:"Orca Cloud",local:"本機設定檔案",kprofiles:"K 值設定"},orcaCloud:{connectedAs:"已連接",logout:"中斷連線",noLogoutPermission:"您沒有中斷連線的權限",noConnectPermission:"您沒有連接到 Orca Cloud 的權限",retry:"重試",back:"使用其他登入方式",connect:{title:"連接到 Orca Cloud",description:"登入您的 Orca Cloud 帳號,將切片機設定檔同步到 Bambuddy。"},providers:{google:"使用 Google 登入",apple:"使用 Apple 登入",github:"使用 GitHub 登入",email:"使用電子郵件和密碼登入"},password:{title:"使用電子郵件和密碼登入",email:"電子郵件",emailPlaceholder:"you@example.com",password:"密碼",submit:"登入"},paste:{title:"完成登入",step1:"已在新分頁中開啟 Orca Cloud 登入頁面。請使用您的 Orca 帳號登入。",step2:'您的瀏覽器將被重新導向到一個 "localhost" URL,該 URL 無法載入。這是正常的 — 我們需要的就是這個 URL。',step3:"從瀏覽器的網址列複製整個 URL,貼到下方。",signInUrl:"若登入分頁未開啟,請點擊此 URL:",label:"在此貼上回呼 URL",placeholder:"http://localhost:41172/callback?code=...&state=...",submit:"完成連接"},profiles:{title:"您的 Orca Cloud 設定檔 ({{count}})",refresh:"重新整理",empty:"您的 Orca Cloud 帳號中尚無設定檔。"},toast:{connected:"已以 {{email}} 身分連接到 Orca Cloud",disconnected:"已從 Orca Cloud 中斷連線"},errors:{startFailed:"無法啟動 Orca Cloud 登入流程。",finishFailed:"無法完成 Orca Cloud 登入。",passwordFailed:"無法使用該電子郵件和密碼登入。",passwordEmpty:"請輸入電子郵件和密碼。",emptyPaste:"請從瀏覽器貼上回呼 URL。",noCode:"該 URL 不像 Orca Cloud 回呼 (缺少 code 參數)。請從網址列複製完整 URL。"}},localProfiles:{title:"本機設定檔案",subtitle:"從 OrcaSlicer 匯入和管理切片預設",import:"匯入設定檔案",importDesc:"將 .bbscfg、.bbsflmt、.orca_filament、.zip 或 .json 檔案拖放到此處",importing:"匯入中...",search:"搜尋本機預設...",noPresets:"尚無本機預設",noSearchResults:"沒有符合搜尋的預設",badge:"本機",edit:"編輯",delete:"刪除",cancel:"取消",deleteConfirmTitle:"刪除預設",deleteConfirm:"確定要刪除此預設嗎？此操作無法復原。",source:"來源",inheritsFrom:"繼承自",filamentType:"類型",vendor:"廠商",compatiblePrinters:"相容印表機",nozzleTemp:"噴嘴溫度",cost:"成本",density:"密度",pressureAdvance:"壓力推進",filament:"耗材",process:"工藝",printer:"印表機",toast:{importSuccess:"已匯入 {{count}} 個預設",importSkipped:"跳過 {{count}} 個預設（重複）",importError:"匯入時出現 {{count}} 個錯誤",deleted:"預設已刪除",updated:"預設已更新"}},connectedAs:"已連線為",logout:"登出",noLogoutPermission:"您沒有登出的權限",failedToLoad:"載入設定檔案失敗",retry:"重試",time:{justNow:"剛剛",minsAgo:"{{count}} 分鐘前",hoursAgo:"{{count}} 小時前",daysAgo:"{{count}} 天前"},toast:{loggedOut:"已登出"},login:{title:"連線到拓竹雲",subtitle:"跨裝置同步您的切片預設",email:"信箱",password:"密碼",region:"地區",regionGlobal:"全球",regionChina:"中國",verificationCode:"驗證碼",totpCode:"驗證器驗證碼",checkEmail:"檢查您的信箱 ({{email}}) 獲取 6 位驗證碼",enterTotpHint:"輸入驗證器 App 中的 6 位驗證碼",accessToken:"存取權杖",accessTokenHint:"貼上您的拓竹雲端存取權杖。中國大陸帳號（綁定手機號碼、無 Email 登入）僅能使用此方式登入。可從 MakerWorld 瀏覽器 Cookie 取得權杖，詳見 Wiki。",back:"返回",loginButton:"登入",verifyButton:"驗證",setTokenButton:"設定權杖",useToken:"改用存取權杖",useEmail:"改用信箱登入",toast:{loggedIn:"登入成功",codeSent:"驗證碼已傳送到您的信箱",enterTotp:"輸入驗證器 App 中的程式碼",tokenSet:"權杖設定成功"}},presets:{myPreset:"我的預設（可編輯）",duplicate:"複製",editable:"可編輯",failedToLoadDetails:"載入預設詳情失敗",deleteConfirm:"刪除此預設？",deleteWarning:'這將從拓竹雲中永久刪除"{{name}}"。此操作無法復原。',noDuplicatePermission:"您沒有複製預設的權限",noEditPermission:"您沒有編輯預設的權限",noDeletePermission:"您沒有刪除預設的權限",types:{filament:"耗材預設",printer:"印表機預設",process:"工藝預設"},toast:{deleted:"預設已刪除",created:"預設已建立",updated:"預設已更新",duplicated:"預設已複製",fieldAdded:'欄位"{{key}}"已新增',exported:"預設已匯出"},baseLabel:"基礎：{{name}}",currentLabel:"目前：{{name}}",newPreset:"新增預設",editPreset:"編輯預設",duplicatePreset:"複製預設",createNewPreset:"建立新預設",customizeSettings:"自訂新預設的設定",compareWithBase:"與基礎預設比較",compare:"比較",basePreset:"基礎預設",selectBasePreset:"選擇基礎預設...",presetName:"預設名稱",myCustomPreset:"我的自訂預設",inheritsFrom:"繼承自",dropJsonToImport:"拖放 JSON 以匯入",tabs:{common:"常用",allFields:"所有欄位"},availableFields:"可用欄位",searchFieldsPlaceholder:"搜尋欄位...",noMatchingFields:"沒有匹配的欄位",allFieldsAdded:"所有欄位已新增",addCustomField:"新增自訂欄位",yourOverrides:"您的覆蓋值",noOverridesYet:"尚無覆蓋值",clickFieldsToAdd:"點選左側的欄位進行新增",saveAsTemplate:"儲存為範本",jsonTip:"提示：將 .json 檔案拖放到此對話方塊的任意位置以匯入設定"},cloudView:{searchPlaceholder:"搜尋預設...",templates:"範本",refresh:"重新整理",newPreset:"新增預設",clearFilters:"清除篩選",compareMode:"比較模式",selectAnotherPreset:"選擇另一個 {{type}} 預設",clickTwoPresets:"點選兩個相同類型的預設進行比較",selectFirst:"1. 選擇第一個",selectSecond:"2. 選擇第二個",compareNow:"立即比較",lastSynced:"上次同步：",showingCount:"顯示 {{showing}} / {{total}} 個預設",noPresetsFound:"未找到預設",columns:{filament:"耗材",process:"工藝",printer:"印表機"},noFilamentPresets:"無耗材預設",noProcessPresets:"無工藝預設",noPrinterPresets:"無印表機預設",filters:{type:"類型",owner:"所有者",printer:"印表機",nozzle:"噴嘴",filament:"耗材",layer:"層",all:"全部",myPresets:"我的預設",builtIn:"內建",process:"工藝"},noTemplatesPermission:"您沒有管理範本的權限",noRefreshPermission:"您沒有重新整理設定檔案的權限",noCreatePermission:"您沒有建立預設的權限"},templates:{title:"快速範本",noTemplates:"尚無範本",createFirst:"從預設編輯器建立範本",typeFilter:"類型：",deleteTitle:"刪除範本",deleteWarning:"此操作無法復原",deleteConfirm:'確定要刪除"{{name}}"嗎？',namePlaceholder:"範本名稱",descriptionPlaceholder:"描述",settingsJson:"設定 (JSON)",fieldsCount:"{{count}} 個欄位",shownInModals:"在對話方塊中顯示",hiddenInModals:"在對話方塊中隱藏",apply:"套用",toast:{deleted:"範本已刪除",updated:"範本已更新",created:"範本已建立",applied:"範本已套用"}}},support:{debugLoggingActive:"偵錯日誌紀錄已啟用",manageLogs:"管理",collectItem7:"印表機連線和韌體版本",collectItem8:"整合狀態（Spoolman、MQTT、HA）",collectItem9:"網路介面（僅子網）",collectItem10:"Python 套件版本",collectItem11:"資料庫健康檢查",collectItem12:"Docker 環境詳情",bundleGenerating:"正在產生套件...",bundleStepConnection:"正在執行印表機連線檢查",bundleStepVirtualPrinters:"正在執行虛擬印表機設定檢查",bundleStepLogScan:"正在掃描最近的日誌以尋找已知問題",bundleStepBuild:"正在建立支援套件 ZIP 檔案"},fileManager:{title:"檔案管理器",subtitle:"組織和管理您的列印檔案",uploadFiles:"上傳檔案",newFolder:"新增資料夾",folderName:"資料夾名稱",folderNamePlaceholder:"例如：功能零件",renameFile:"重新命名檔案",renameFolder:"重新命名資料夾",invalidFilenameChar:'列印檔案名稱中不允許使用字元 "{{char}}"。印表機 SD 卡拒絕以下字元: < > : " / \\ | ? *',moveFiles:"移動 {{count}} 個檔案",rootNoFolder:"根目錄（無資料夾）",current:"目前",linkFolder:"連結資料夾",linkFolderDescription:'將"{{name}}"連結到專案或歸檔以便快速存取。',project:"專案",archive:"歸檔",noProjectsFound:"未找到專案",noArchivesFound:"未找到歸檔",unlink:"取消連結",link:"連結",dragDropFiles:"將檔案拖放到此處",dropFilesHere:"將檔案放在此處",orClickToBrowse:"或點選瀏覽",allFileTypesSupported:"支援所有檔案類型。ZIP 檔案將被解壓。",zipFilesDetected:"偵測到 ZIP 檔案",zipExtractOptions:"ZIP 檔案將被解壓。選擇如何處理資料夾結構：",preserveZipStructure:"保留 ZIP 中的資料夾結構",createFolderFromZip:"從 ZIP 檔名建立資料夾",stlThumbnailGeneration:"STL 縮圖產生",zipMayContainStl:"ZIP 檔案可能包含 STL 檔案。可以在解壓時產生縮圖。",thumbnailsCanBeGenerated:"可以為 STL 檔案產生縮圖。大型模型可能需要更長時間處理。",generateThumbnailsForStl:"為 STL 檔案產生縮圖",threemfDetected:"偵測到 3MF 檔案",threemfExtractionInfo:"將自動從 3MF 檔案中提取印表機型號、材料、顏色和列印設定。",willBeExtracted:"將被解壓",filesExtracted:"已解壓 {{count}} 個檔案",uploadComplete:"上傳完成：{{succeeded}} 個成功",uploadFailed:"上傳失敗",zipFilesFailed:"{{count}} 個檔案失敗",uploading:"上傳中...",changeLink:"更改連結...",linkTo:"連結到...",linkToProjectOrArchive:"連結到專案或歸檔",addToQueue:"新增到佇列",schedulePrint:"排程",generateThumbnail:"產生縮圖",generateThumbnails:"產生縮圖",generateThumbnailsForMissing:"為缺少縮圖的 STL 檔案產生縮圖",gridView:"網格檢視",listView:"列表檢視",lowDiskSpaceWarning:"磁碟空間不足警告",lowDiskSpaceDetails:"僅剩 {{free}}（總共 {{total}}）。閾值設定為 {{threshold}} GB。",files:"檔案",folders:"資料夾",size:"大小",free:"剩餘",allFiles:"所有檔案",allExternal:"外部",externalIsEmpty:"沒有外部檔案",externalEmptyDescription:"已連結的外部資料夾中的檔案將顯示於此。",wrap:"換行",enableTextWrapping:"啟用文字換行",disableTextWrapping:"停用文字換行",collapse:"折疊",collapseFoldersByDefault:"預設折疊資料夾",expandFoldersByDefault:"預設展開資料夾",dragToResizeTooltip:"拖曳調整大小，雙擊重設",searchFiles:"搜尋檔案...",allTypes:"所有類型",prints:"列印",ascending:"升序",descending:"降序",resultsCount:"{{showing}} / {{total}} 個檔案",selectAll:"全選",deselectAll:"取消全選",selected:"已選擇 {{count}} 個",adding:"新增中...",loadingFiles:"載入檔案中...",folderIsEmpty:"資料夾為空",noFilesYet:"尚無檔案",folderEmptyDescription:"上傳檔案或將檔案移入此資料夾以開始使用。",noFilesDescription:"上傳檔案以開始組織您的列印相關檔案。",noMatchingFiles:"沒有匹配的檔案",noMatchingFilesDescription:"沒有檔案匹配您目前的搜尋或篩選條件。",clearFilters:"清除篩選",printedCount:"已列印 {{count}} 次",uploadedBy:"上傳者",deleteFolder:"刪除資料夾",deleteFile:"刪除檔案",deleteFilesCount:"刪除 {{count}} 個檔案",deleteFolderConfirm:"確定要刪除此資料夾嗎？其中的所有檔案也將被刪除。",deleteFileConfirm:"確定要刪除此檔案嗎？",deleteFilesConfirm:"確定要刪除 {{count}} 個選中的檔案嗎？此操作無法復原。",deleting:"刪除中...",noPermissionRenameFolder:"您沒有重新命名資料夾的權限",noPermissionLinkFolder:"您沒有連結資料夾的權限",noPermissionDeleteFolder:"您沒有刪除資料夾的權限",noPermissionPrint:"您沒有列印的權限",noPermissionSlice:"您沒有切片檔案的權限",noPermissionAddToQueue:"您沒有新增到佇列的權限",noPermissionDownload:"您沒有下載檔案的權限",noPermissionRenameFile:"您沒有重新命名此檔案的權限",noPermissionGenerateThumbnail:"您沒有產生縮圖的權限",noPermissionDeleteFile:"您沒有刪除此檔案的權限",noPermissionCreateFolder:"您沒有建立資料夾的權限",noPermissionUpload:"您沒有上傳檔案的權限",noPermissionMoveFiles:"您沒有移動檔案的權限",noPermissionDeleteFiles:"您沒有刪除檔案的權限",linkExternal:"連結外部",linkExternalFolder:"連結外部資料夾",linkExternalFolderDescription:"將主機目錄（NAS、USB、網路共享）掛載到檔案管理器中。檔案不會被複制——直接從原始路徑存取。",externalFolderNamePlaceholder:"例如：NAS列印檔案",externalPath:"主機路徑",externalPathHelp:"Docker主機上目錄的絕對路徑。必須以繫結掛載方式掛載到容器中。",readOnly:"只讀",readOnlyHelp:"防止上傳和刪除",showHiddenFiles:"顯示隱藏檔案（點檔案）",externalFolder:"外部資料夾",scanFolder:"掃描",toast:{folderCreated:"資料夾已建立",folderDeleted:"資料夾已刪除",fileDeleted:"檔案已刪除",filesDeleted:"已刪除 {{count}} 個檔案",filesMoved:"檔案已移動",folderLinked:"資料夾已連結",folderUnlinked:"資料夾已取消連結",externalFolderLinked:"外部資料夾已連結並掃描",folderScanned:"掃描完成：新增 {{added}} 個，移除 {{removed}} 個",addedToQueue:"已將 {{count}} 個檔案新增到佇列",addedToQueuePartial:"已新增 {{added}} 個檔案，{{failed}} 個失敗",failedToAddToQueue:"新增檔案失敗：{{error}}",fileRenamed:"檔案已重新命名",folderRenamed:"資料夾已重新命名",thumbnailsGenerated:"已產生 {{count}} 個縮圖",thumbnailsGeneratedPartial:"已產生 {{succeeded}} 個縮圖，{{failed}} 個失敗",noStlMissingThumbnails:"沒有缺少縮圖的 STL 檔案",failedToGenerateThumbnails:"產生縮圖失敗：{{error}}",thumbnailGenerated:"縮圖已產生",failedToGenerateThumbnail:"產生縮圖失敗：{{error}}"}},projects:{title:"專案",subtitle:"組織和追蹤您的 3D 列印專案",newProject:"新增專案",editProject:"編輯專案",deleteProject:"刪除專案",projectName:"專案名稱",description:"描述",noProjects:"尚無專案",noProjectsFiltered:"沒有{{status}}專案",noProjectsFilteredHelp:"您沒有任何{{status}}專案。當專案狀態更改時，它們將出現在這裡。",createFirst:"建立您的第一個項目以開始組織相關列印、追蹤進度和管理構建。",createFirstButton:"建立您的第一個項目",create:"建立",files:"檔案",prints:"列印",plates:"板",parts:"零件",lastModified:"最後修改",deleteConfirm:"確定要刪除此項目嗎？歸檔和佇列項目將被取消連結但不會被刪除。",addFiles:"新增檔案",removeFile:"移除檔案",viewDetails:"檢視詳情",namePlaceholder:"例如：Voron 2.4 構建",urlLabel:"網址",urlPlaceholder:"https://makerworld.com/...",urlInvalid:"網址必須以 http:// 或 https:// 開頭",openExternalUrl:"開啟專案網址",coverImageLabel:"封面圖片",coverImageAlt:"專案封面圖片",coverImageUpload:"上傳",coverImageReplace:"替換",coverImageRemove:"移除",descriptionPlaceholder:"可選描述...",color:"顏色",targetPlates:"目標板數",targetPlatesPlaceholder:"例如：25",targetPlatesHelp:"列印任務數量",targetParts:"目標零件數",targetPartsPlaceholder:"例如：150",targetPartsHelp:"所需零件總數",tagsLabel:"標籤（逗號分隔）",tagsPlaceholder:"例如：voron、功能件、禮物",dueDate:"截止日期",priority:"優先順序",priorityLow:"低",priorityNormal:"普通",priorityHigh:"高",priorityUrgent:"緊急",statusActive:"進行中",statusCompleted:"已完成",statusArchived:"已歸檔",done:"完成",completed:"已完成",failed:"失敗",inQueue:"佇列中",noPrintsYet:"尚無列印",printJobs:"列印任務（板）",partsPrinted:"已列印零件",failedParts:"失敗零件",import:"匯入",export:"匯出",importProject:"匯入專案",exportAll:"匯出所有專案",loading:"載入專案中...",noEditPermission:"您沒有編輯專案的權限",noDeletePermission:"您沒有刪除專案的權限",noCreatePermission:"您沒有建立專案的權限",noImportPermission:"您沒有匯入專案的權限",noExportPermission:"您沒有匯出專案的權限",toast:{created:"專案已建立",updated:"專案已更新",deleted:"專案已刪除",imported:"專案已匯入",multipleImported:"已匯入 {{count}} 個項目",importFailed:"匯入失敗",exported:"專案已匯出（僅中繼資料）"}},projectDetail:{notFound:"未找到專案",backToProjects:"返回專案",export:"匯出",exportProject:"匯出專案",noExportPermission:"您沒有匯出專案的權限",noEditPermission:"您沒有編輯專案的權限",partOf:"屬於：",priorityLabel:"優先順序：",noPrints:"此項目尚無列印",status:{active:"進行中",completed:"已完成",archived:"已歸檔"},priority:{low:"低",normal:"普通",high:"高",urgent:"緊急"},dueDate:{overdue:"已逾期",today:"今天到期",daysLeft:"還有 {{count}} 天"},progress:{platesProgress:"板進度",partsProgress:"零件進度",printJobs:"列印任務",parts:"零件",percentComplete:"{{percent}}% 完成",remaining:"剩餘 {{count}} 個"},stats:{printJobs:"列印任務",total:"總計",failed:"{{count}} 個失敗",partsPrinted:"已列印 {{count}} 個零件",printTime:"列印時間",filamentUsed:"耗材用量"},cost:{title:"成本追蹤",filamentCost:"耗材成本",energy:"能源",totalCost:"總成本",total:"總計",includesBom:"含物料清單",budget:"預算",remaining:"剩餘"},subProjects:{title:"子專案 ({{count}})"},notes:{title:"備註",noEditPermission:"您沒有編輯備註的權限",placeholder:"新增關於此項目的備註...",empty:"尚無備註。點選編輯新增備註。"},files:{title:"檔案",linkFolders:"從檔案管理器連結資料夾",forQuickAccess:"到此項目以便快速存取。",fileCount:"{{count}} 個檔案",empty:"未連結資料夾。前往檔案管理器將資料夾連結到此項目。",noFiles:"此資料夾中沒有檔案。",print:"立即列印",addToQueue:"加入佇列"},bom:{title:"材料清單",acquired:"已獲取 {{completed}}/{{total}}",showAll:"顯示全部",hideDone:"隱藏已完成",addPart:"新增零件",noAddPermission:"您沒有新增零件的權限",partNamePlaceholder:"零件名稱（例如：M3x8 螺絲）",partName:"零件名稱",qty:"數量",price:"價格 ({{currency}})",sourcingUrlPlaceholder:"採購連結（可選）",remarksPlaceholder:"備註（可選）",deletePart:"刪除零件",deleteConfirm:'確定要刪除"{{name}}"嗎？',noUpdatePermission:"您沒有更新零件的權限",noEditPermission:"您沒有編輯零件的權限",noDeletePermission:"您沒有刪除零件的權限",totalCost:"總成本：",empty:"材料清單中沒有零件。新增硬體、電子元件或其他元件以追蹤需要採購的物品。"},timeline:{title:"活動時間線",empty:"尚無活動。"},template:{saveAsTemplate:"儲存為範本",noCreatePermission:"您沒有建立範本的權限"},queue:{title:"佇列",viewAll:"檢視全部",printing:"{{count}} 個列印中",queued:"{{count}} 個佇列中"},prints:{title:"列印 ({{count}})"},toast:{projectUpdated:"專案已更新",partAdded:"零件已新增",partRemoved:"零件已移除",exportFailed:"匯出失敗",projectExported:"專案已匯出",templateCreated:"範本已建立"}},system:{title:"系統資訊",version:"版本",uptime:"執行時間",cpuUsage:"CPU 使用率",memoryUsage:"記憶體使用率",diskUsage:"磁碟使用率",networkInfo:"網路資訊",logs:"日誌",debugMode:"偵錯模式",enableDebug:"啟用偵錯日誌",disableDebug:"停用偵錯日誌",downloadLogs:"下載日誌",clearLogs:"清除日誌",dockerInfo:"Docker 資訊",containerName:"容器名稱",imageName:"映象名稱",platform:"平臺",architecture:"架構"},library:{title:"耗材庫",addFilament:"新增耗材",editFilament:"編輯耗材",deleteFilament:"刪除耗材",vendor:"廠商",material:"材料",color:"顏色",kFactor:"K 值",temperature:"溫度",noFilaments:"耗材庫中沒有耗材",deleteConfirm:"確定要刪除此耗材嗎？",importFromPrinter:"從印表機匯入",exportToFile:"匯出到檔案"},slice:{title:"切片模型",action:"切片",actionAll:"切片全部 {{count}} 個盤面",actionAllTitle:"將所有盤面切片為單一的多盤面輸出（單一封存）。線材選擇涵蓋專案定義的每個槽位。",allPlatesToggle:"切片全部 {{count}} 個盤面",slicing:"切片中…",printer:"印表機設定檔",process:"製程設定檔",filament:"耗材設定檔",filamentSlot:"耗材 {{index}}（{{type}}）",selectPreset:"— 選擇預設 —",loadingPresets:"載入預設中…",analyzingPlateFilaments:"分析列印板耗材中…",analyzingPlateFilamentsHint:"正在執行預覽切片以發現此列印板使用的 AMS 插槽。之後會快取 — 重新開啟是即時的。",previewToast:"分析 {{name}} — {{elapsed}}",previewWithProgress:"分析 {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",notUsedByPlate:"— 此列印板未使用",noPresetsForSlot:"無可用預設",otherPrinters:"其他印表機",presetsLoadFailed:"載入預設失敗。請先開啟設定 → 設定檔以匯入。",refreshPresets:"重新整理",refreshPresetsTitle:"重新整理預設 — 擷取最新的雲端與打包設定清單（在 Bambu Studio 或 Bambu Handy 中刪除預設後使用）",allPresetsRequired:"必須選擇所有預設",bundle:"切片器套裝",bundleNone:"— 無（單獨選擇預設）—",bundleAllRequired:"必須選擇套裝的製程和每個耗材槽",enqueuing:"提交切片任務中…",queued:"已排隊…",failed:"切片失敗。請檢查切片器 sidecar 日誌。",startedToast:"在背景切片 {{name}}…",queuedToast:"已排隊：{{name}} — {{elapsed}}",runningToast:"切片 {{name}} — {{elapsed}}",runningWithProgress:"{{name}} – {{stage}} ({{percent}}%) – {{elapsed}}",runningWithProgressMultiPlate:"盤面 {{plateIndex}} / {{plateCount}} • {{name}} – {{stage}} ({{percent}}%) – {{elapsed}}",completedToast:"已切片 {{name}}",failedTitle:"切片失敗",failedToast:"切片 {{name}} 失敗：{{detail}}",tier:{local:"已匯入",cloud:"Bambu Cloud",orcaCloud:"Orca Cloud",standard:"標準"},cloud:{notAuthenticated:"登入 Bambu Cloud（設定 → 設定檔 → Bambu Cloud）以查看雲端預設。",expired:"Bambu Cloud 工作階段已過期 — 請重新登入以重新整理雲端預設。",unreachable:"目前無法存取 Bambu Cloud。本機和標準預設仍可使用。"},orcaCloud:{notAuthenticated:"登入 Orca Cloud（設定檔 → Orca Cloud）以查看您的 Orca 預設。",expired:"Orca Cloud 工作階段已過期 — 請重新登入以重新整理您的 Orca 預設。",unreachable:"Orca Cloud 目前無法存取。其他預設仍可正常使用。"},bedType:{label:"列印板",auto:"自動（使用製程預設）",coolPlate:"冷板",coolPlateSuperTack:"Cool Plate SuperTack",engineering:"Engineering Plate",highTemp:"High Temp Plate",texturedPEI:"Textured PEI Plate",smoothPEI:"Smooth PEI Plate"}},spoolman:{title:"Spoolman 整合",enabled:"Spoolman 已啟用",url:"Spoolman URL",connected:"已連線",disconnected:"未連線",testConnection:"測試連線",sync:"同步",syncing:"同步中...",lastSync:"上次同步",linkToSpoolman:"連結到 Spoolman",openInSpoolman:"在 Spoolman 中開啟",unlinkSpool:"取消連結耗材",unlinkConfirmTitle:"取消指派料盤？",unlinkConfirmMessage:"這將從此插槽中移除料盤。料盤本身的資料將保持不變。",selectSpool:"選擇耗材",noUnlinkedSpools:"無未指派的料盤",linkSuccess:"料盤指派成功",linkFailed:"料盤指派失敗",unlinkSuccess:"料盤取消指派成功",unlinkFailed:"料盤取消指派失敗",linkedSpool:"已指派料盤",spoolId:"耗材 ID",fillSourceLabel:"(Spoolman)",weight:"重量",remaining:"剩餘",disableWeightSync:"停用 AMS 估計重量同步",disableWeightSyncDesc:"不從 AMS 估計值更新剩餘容量。如果您更喜歡 Spoolman 的用量追蹤而非 AMS 百分比估計，請使用此選項。新耗材仍將使用 AMS 估計值作為初始重量。",reportPartialUsage:"報告失敗列印的部分用量",reportPartialUsageDesc:"當列印失敗或被取消時，根據層進度報告估計的耗材使用量。"},inventory:{title:"耗材庫存",subtitle:"管理您的料盤",spoolmanMixedContentTitle:"Spoolman 無法透過 HTTPS 載入 — 瀏覽器已封鎖混合內容",spoolmanMixedContentBody:"Bambuddy 透過您的反向代理以 HTTPS 提供服務，但您的 Spoolman 位址仍為 HTTP。基於安全考量，瀏覽器會封鎖混合內容，因此內嵌的 Spoolman 介面無法載入。Spoolman 也必須可透過 HTTPS 存取。",spoolmanMixedContentFixReverseProxy:"請將 Spoolman 置於與 Bambuddy 相同的反向代理（Traefik / Nginx / Caddy）之後並啟用 HTTPS，然後在設定中將 Spoolman URL 更新為新的 HTTPS 位址。",spoolmanMixedContentFixOpenNewTab:"作為替代方案，可在新分頁以 HTTP 開啟 Spoolman — 混合內容規則僅適用於內嵌框架，獨立分頁仍可正常運作。",spoolmanOpenInNewTab:"在新分頁開啟 Spoolman",labels:{title:"列印線材標籤",selectedCount:"已選 {{count}} 項",pickSpools:"選擇要列印標籤的線材：",searchPlaceholder:"按名稱、品牌或 #ID 搜尋",filterByMaterial:"材料：",allMaterials:"全部",selectVisible:"選擇所有可見 ({{count}})",deselectVisible:"取消選擇可見",clearAll:"全部清除",noSpoolsToShow:"沒有要顯示的線材。請調整篩選條件後重試。",noMatches:"沒有線材符合目前搜尋或篩選。",printOne:"列印此線材的標籤",printLabels:"列印標籤…",bulkTitle:"從目前顯示的 {{count}} 個線材中選擇要列印標籤的",noSpoolsTitle:"沒有要貼標籤的線材",error:"無法產生標籤：{{msg}}",sortBy:{label:"排序：",id:"按 ID",color:"按顏色"},templates:{amsHolderSmall:{label:"AMS 支架 — 小 (74 × 33 mm)",hint:"每頁一個標籤；對應 MakerWorld 模型 752566 (AMS 耗材標籤支架) 中可列印的標籤。"},amsHolderLarge:{label:"AMS 支架 — 大 (75 × 55 mm)",hint:"每頁一個標籤；對應 AMS 耗材標籤支架的紙卡插入款。空間足夠放置色塊、品牌、材質、ID 與 QR 碼。"},box40x30:{label:"盒標籤 (40 × 30 mm)",hint:"每頁一張；常見的 DK/Brother 捲尺寸,適合用於耗材袋與儲物盒標籤。"},box:{label:"Box label (62 × 29 mm)",hint:"每頁一個標籤；適配 Brother PT/QL 和 Dymo 小標籤。"},averyL7160:{label:"Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)",hint:"歐洲規格紙張；每張 A4 頁 21 個標籤。"},avery5160:{label:"Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)",hint:"美國規格紙張；每張 Letter 頁 30 個標籤。"}}},addSpool:"新增耗材",editSpool:"編輯耗材",copySpool:"複製耗材",material:"材料",selectMaterial:"選擇材料...",subtype:"子類型",brand:"品牌",searchBrand:"搜尋品牌...",useCustomBrand:'使用"{{brand}}"',useCustomMaterial:"使用自訂材料：{{material}}",colorName:"顏色名稱",colorNamePlaceholder:"翡翠白、烈焰紅...",color:"顏色",hexColor:"十六進位顏色",pickColor:"選擇自訂顏色",labelWeight:"標籤重量",coreWeight:"空盤重量",searchSpoolWeight:"搜尋耗材重量...",weightUsed:"已使用",currentWeight:"剩餘重量",measuredWeight:"稱量重量",spoolName:"料盤",costPerKg:"每公斤成本",storageLocation:"存放位置",storageLocationPlaceholder:"例如：貨架A，抽屜1",openInInventory:"在庫存中查看",measuredWeightError:"稱量重量必須在 {{min}}g 到 {{max}}g 之間。",slicerFilament:"切片耗材",slicerFilamentName:"切片預設名稱",slicerPreset:"切片預設",searchPresets:"搜尋耗材預設...",selectedPreset:"已選擇",noPresetsFound:"未找到預設",tempOverrides:"溫度覆蓋",note:"備註",notePlaceholder:"關於此耗材的任何備註...",category:"類別",categoryPlaceholder:"例如：生產、原型、客戶A",categoryNone:"未分類",storageLocationNone:"未設定位置",lowStockThresholdOverride:"低庫存閾值（此料盤）",lowStockThresholdOverrideHelp:"留空以使用全域閾值（{{global}}%）。",clearRfid:"清除 RFID 標籤",rfidCleared:"RFID 標籤已清除",archive:"歸檔",restore:"恢復",noSpools:"尚無耗材。新增您的第一個耗材開始使用。",noAvailableSpools:"沒有可用的耗材。請先向庫存中新增耗材，或從其他槽位取消指派一個耗材。",kProfiles:"K 值設定",addKProfile:"新增 K 值設定",assignSpool:"分配耗材",unassignSpool:"取消分配",assignSuccess:"耗材已分配，AMS 槽位已設定",assignFailed:"分配耗材失敗",assignMismatchTitle:"材料不符",assignMismatchMessage:'所選料盤材料 "{{spoolMaterial}}" 與 {{location}} 的料槽材料 "{{trayMaterial}}" 不符。仍要分配嗎？',assignMismatchConfirm:"仍然分配",assignPartialMismatchMessage:'料盤材料 "{{spoolMaterial}}" 與 {{location}} 的 "{{trayMaterial}}" 相近但不完全一致。是否繼續？',assignProfileMismatchMessage:'料盤設定 "{{spoolProfile}}" 與 {{location}} 的料槽設定 "{{trayProfile}}" 不一致。是否繼續？',assignReconfigureNote:"AMS 槽位將重新設定為使用料盤的設定。",selectSpool:"選擇要分配到此槽位的耗材",assigned:"已分配",assigning:"分配中...",searchSpools:"搜尋耗材...",showAllSpools:"顯示所有耗材",spoolmanSpools:"Spoolman 線軸",allMaterials:"所有材料",filterByBrand:"按品牌篩選...",showArchived:"顯示已歸檔",quickAdd:"快速新增（庫存）",quantity:"數量",stock:"庫存",configured:"已設定",spoolsCreated:"已建立 {{count}} 個耗材",spoolsPartiallyCreated:"已建立 {{created}} / {{total}} 個耗材（部分失敗）",spoolCreated:"耗材已建立",spoolUpdated:"耗材已更新",spoolDeleted:"耗材已刪除",deepLinkSpoolNotFound:"找不到耗材",deepLinkFetchFailed:"無法載入耗材 — 請重試",spoolArchived:"耗材已歸檔",spoolRestored:"耗材已恢復",kProfileSaveFailed:"K值設定檔設定無法儲存",syncWeightSpoolNotFound:"找不到耗材 — 可能已被刪除",syncWeightSpoolmanUnreachable:"Spoolman 無法存取 — 請稍後再試",syncWeightFailed:"重量同步失敗",spoolmanUnreachable:"Spoolman 無法存取 — 請稍後再試",deleteSpoolNotFound:"找不到耗材 — 可能已被刪除",deleteFailed:"刪除耗材失敗",archiveSpoolNotFound:"找不到耗材 — 可能已被刪除",archiveFailed:"歸檔耗材失敗",restoreSpoolNotFound:"找不到耗材 — 可能已被刪除",restoreFailed:"恢復耗材失敗",saveFailed:"儲存變更失敗",tagClearFailed:"清除標籤失敗",deleteConfirm:"確定要刪除此耗材嗎？此操作無法復原。",archiveConfirm:"確定要歸檔此耗材嗎？",advancedSettings:"進階設定",filamentInfoTab:"耗材資訊",paProfileTab:"PA 設定",filamentInfo:"耗材",additional:"附加",loadingPresets:"載入雲端預設中...",cloudConnected:"雲端已連線",cloudNotConnected:"雲端未連線（使用預設值）",recentColors:"最近",searchColors:"搜尋顏色...",searchResults:"搜尋結果",allColors:"所有顏色",commonColors:"常用顏色",showLess:"顯示更少",showAll:"顯示全部",noColorsFound:"沒有顏色匹配您的搜尋",noResults:"未找到匹配項",extraColorsLabel:"附加顏色",extraColorsPlaceholder:"EC984C,#6CD4BC,A66EB9,D87694",extraColorsHint:"貼上 2 至 8 個十六進位色值,以逗號分隔。將以漸層方式呈現。",extraColorsInvalid:"已略過無效的十六進位值:{{tokens}}",colorEffectLabel:"效果",colorEffect:{none:"無",sparkle:"閃光",wood:"木紋",marble:"大理石",glow:"夜光",matte:"霧面",silk:"絲光",galaxy:"星空",rainbow:"彩虹",metal:"金屬",translucent:"半透明",gradient:"漸層",dualColor:"雙色",triColor:"三色",multicolor:"多色"},selectMaterialFirst:"請先在耗材資訊分頁中選擇材料。",noPrintersConfigured:"未設定印表機。新增印表機以使用 PA 設定。",matchingFilter:"匹配",anyBrand:"任何品牌",anyVariant:"任何變體",autoSelect:"自動選擇",matches:"匹配",match:"匹配",noMatches:"無匹配",connected:"已連線",offline:"離線",printerOffline:"印表機離線。連線後檢視校準設定。",noKProfilesMatch:"沒有 K 值設定匹配所選耗材。",leftNozzle:"左噴嘴",rightNozzle:"右噴嘴",profilesSelected:"個校準設定已選擇",totalInventory:"總庫存",totalConsumed:"總消耗",byMaterial:"按材料",inPrinter:"在印表機中",lowStock:"庫存不足",sinceTracking:"自開始追蹤",resetConsumedCounter:"重置計數器",resetConsumedCounterTooltip:"將此料盤的已消耗克數計數器歸零。剩餘重量不會變更。",resetConsumedCounterConfirm:"將此料盤的已消耗克數計數器重置為 0？後續列印將從零開始計算。料盤本身、剩餘重量計算與您的設定均不會變更。",resetAllConsumedCounters:"重置所有計數器",resetAllConsumedCountersTooltip:"將每個料盤的已消耗克數計數器歸零。剩餘重量不會變更。",resetAllConsumedCountersConfirm:"將全部 {{count}} 個料盤（含已封存）的已消耗克數計數器重置為 0？這將清空「累計消耗」統計值，後續列印從零開始計算。料盤與剩餘重量不會變更。",consumedCounterReset:"計數器已重置",allConsumedCountersReset:"已重置 {{count}} 個料盤的計數器",resetConsumedCounterFailed:"重置計數器失敗",loadedInAms:"已裝載到 AMS/外接",remaining:"剩餘",weightCheck:"重量檢查",lastWeighed:"上次稱量",neverWeighed:"從未稱量",search:"搜尋耗材...",showing:"顯示",to:"到",of:"共",show:"顯示",spools:"個耗材",spool:"個耗材",page:"頁",noSpoolsMatch:"未找到結果",noSpoolsMatchDesc:"嘗試調整您的搜尋或篩選條件。",active:"活躍",archived:"已歸檔",all:"全部",used:"已使用",new:"新的",clearFilters:"清除篩選",table:"表格",cards:"卡片",net:"淨重",groupSimilar:"分組",groupedSpools:"{{count}} 個相同耗材",groupedRows:"行",columns:"列",configureColumns:"設定列",configureColumnsDesc:"拖曳以重新排序列或使用箭頭。使用眼睛圖示切換可見性。",visible:"可見",reset:"重設",cancel:"取消",applyChanges:"套用更改",moveUp:"上移",moveDown:"下移",hideColumn:"隱藏列",showColumn:"顯示列",linkToSpool:"連結到耗材",tagLinked:"標籤已連結到耗材",tagLinkFailed:"連結標籤失敗",tagAlreadyLinked:"標籤已連結到其他耗材",unknownTag:"偵測到未知 RFID 標籤",usageHistory:"使用歷史",noUsageHistory:"尚無使用紀錄",printName:"列印名稱",weightConsumed:"消耗重量",clearHistory:"清除",historyCleared:"使用歷史已清除",fillSourceLabel:"(庫存)",lowStockThresholdError:"閾值必須在 0.1 到 99.9 之間",spoolmanFilamentCatalog:"Spoolman 耗材目錄",pickFromSpoolmanCatalog:"從 Spoolman 目錄選擇…",spoolmanFilamentSelected:"已從 Spoolman 目錄選擇耗材",spoolmanFilamentUnlinked:"已解除耗材目錄關聯",noSpoolmanFilaments:"Spoolman 目錄中未找到耗材",spoolmanFilamentColorSwatch:"耗材顏色",spoolWeightManagedBySpoolman:"空線軸重量在 Spoolman 中按耗材類型管理",spoolmanCatalogLoadFailed:"無法載入 Spoolman 耗材目錄"},timelapse:{title:"縮時攝影",create:"建立縮時攝影",download:"下載",delete:"刪除",preview:"預覽",frameRate:"幀率",quality:"品質",processing:"處理中...",noTimelapses:"無可用縮時攝影"},ams:{title:"AMS",slot:"槽位",empty:"空",emptySlot:"空槽位",slotEmpty:"空",emptySlotReset:"未指派線材",unknown:"未知",humidity:"濕度",temperature:"溫度",filamentType:"耗材類型",filamentColor:"顏色",remaining:"剩餘",history:"AMS 歷史",noHistory:"無可用歷史",configureSlot:"設定槽位",externalSpool:"外接耗材",profile:"設定",kFactor:"K 值",fill:"填充",configure:"設定",used:"已使用",remainingUnit:"剩餘"},printModal:{title:"開始列印",selectPrinter:"選擇印表機",selectPlate:"選擇板",filamentMapping:"耗材對應",totalCost:"總成本：",slotRemainingShort:" - 剩餘 {{grams}}g",printSettings:"列印設定",bedLeveling:"熱床調平",flowCalibration:"流量校準",vibrationCalibration:"振動校準",layerInspection:"首層檢查",timelapse:"縮時攝影",startPrint:"開始列印",addToQueue:"新增到佇列",cancel:"取消",noPrintersAvailable:"無可用印表機",printerBusy:"印表機忙碌",printerOffline:"印表機離線",sameTypeDifferentColor:"相同類型，不同顏色",filamentTypeNotLoaded:"耗材類型未裝載",openCalendar:"開啟日曆",leftNozzle:"左",rightNozzle:"右",leftNozzleTooltip:"左噴嘴",rightNozzleTooltip:"右噴嘴",filamentOverride:"耗材覆蓋",filamentOverrideHint:"可選覆蓋用於基於模型的耗材分配。排程器將使用您選擇的耗材而不是原始 3MF 值進行匹配。",originalFilament:"原始",overrideWith:"覆蓋為",resetToOriginal:"恢復為原始",insufficientFilamentTitle:"耗材不足",insufficientFilamentMessage:"部分已分配料盤的剩餘耗材少於本次列印所需：",insufficientFilamentLine:"{{printer}} - {{slot}}：需要 {{required}}g，剩餘 {{remaining}}g",printAnyway:"仍然列印",forceColorMatch:"強制顏色匹配",staggerPrinterStarts:"錯開印表機啟動",staggerGroupSize:"群組大小",staggerInterval:"間隔（分鐘）",staggerPreview:"{{printers}} 台印表機 → 分成 {{groups}} 組，每組 {{size}} 台，每 {{interval}} 分鐘啟動一組",staggerLastGroup:"最後一組：{{count}}",staggerTotal:"總計：{{minutes}} 分鐘",staggerToPrinters:"分批傳送到 {{count}} 臺印表機",gcodeInjection:"注入自動列印G-code"},backup:{includesEncryptionKey:"本機備份包含 MFA 加密金鑰檔案（DATA_DIR/.mfa_encryption_key），因此備份 ZIP 是自包含的。請將 ZIP 視為敏感檔案 — 任何擁有該檔案的人都可以解密內部儲存的 OIDC 用戶端機密和 TOTP 機密。",title:"備份與恢復",createBackup:"建立備份",restoreBackup:"恢復備份",restoreDescription:"從備份檔案替換所有資料",downloadBackup:"下載備份",uploadBackup:"上傳備份",lastBackup:"上次備份",autoBackup:"自動備份",backupNow:"立即備份",restoreWarning:"警告：恢復備份將覆蓋所有目前資料。",includeArchives:"包含歸檔",includeSettings:"包含設定",includeProfiles:"包含設定檔案",backupSuccess:"備份建立成功",restoreSuccess:"備份恢復成功",backupFailed:"備份失敗",restoreFailed:"恢復失敗",restoreNote:"恢復期間虛擬印表機將停止",githubBackup:"GitHub 備份",enabled:"已啟用",cloudLoginRequired:"需要登入 Bambu Cloud。請在 設定檔案 → 雲設定檔案 中登入以啟用 GitHub 備份。",cloudLoginRequiredShort:"需要雲端登入",githubDescription:"自動將您的設定檔案同步到私有 GitHub 倉庫以進行備份和版本歷史紀錄。",repoIsPrivate:"儲存庫為私有 — 可安全備份。",repoIsPublicWarning:"儲存庫為公開（PUBLIC）。Bambuddy 備份包含 MQTT 認證、Home Assistant 權杖、Prometheus 權杖、您的 Bambu Cloud 電子郵件，以及透過 K-profile 暴露的印表機存取碼。在您於服務商設定中將儲存庫改為私有之前，儲存將被阻擋。",repoVisibilityUnknown:"無法確認儲存庫的可見性。Bambuddy 拒絕向任何未確認為私有的目標進行備份；儲存將被阻擋。",repositoryUrl:"倉庫 URL",repoUrlPlaceholderGitHub:"https://github.com/username/repo-name",repoUrlPlaceholderGitea:"https://gitea.example.com/username/repo-name",repoUrlPlaceholderForgejo:"https://forgejo.example.com/username/repo-name",repoUrlPlaceholderGitLab:"https://gitlab.com/username/repo-name",allowInsecureHttp:"允許不安全的 HTTP",allowInsecureHttpHint:"為無 TLS 的私人網路自托管執行個體啟用",personalAccessToken:"個人存取權杖",tokenSaved:"（已儲存）",enterNewToken:"輸入新權杖以更新",tokenHint:"具有內容讀寫權限的細粒度權杖",branch:"分支",provider:"Git 供應商",providerGitHub:"GitHub",providerGitLab:"GitLab",providerGitea:"Gitea",providerForgejo:"Forgejo",manualOnly:"僅手動",hourly:"每小時",daily:"每天",weekly:"每週",includeInBackup:"包含在備份中",kProfiles:"K 設定檔案",kProfilesDescription:"來自已連線印表機的壓力推進校準",noPrintersConnected:"沒有印表機連線",printersConnected:"{{connected}}/{{total}} 已連線",cloudProfiles:"雲設定檔案",cloudProfilesDescription:"來自 Bambu Cloud 的耗材、印表機和工藝預設",appSettings:"應用程式設定",appSettingsDescription:"Bambuddy 設定（完整資料庫）",spoolInventory:"耗材庫存",spoolInventoryDescription:"耗材卷軸、使用紀錄和成本追蹤",printArchives:"列印檔案",printArchivesDescription:"列印歷史中繼資料（不含 gcode/3MF 檔案）",lastBackupAt:"上次備份：",noBackupsYet:"尚無備份",next:"下次：",startingBackup:"正在啟動備份...",test:"測試",enableBackup:"啟用備份",testConnection:"測試連線",enterRepoUrl:"請輸入倉庫 URL",enterRepoAndToken:"請輸入倉庫 URL 和存取權杖",repoRequired:"倉庫 URL 為必填項",tokenRequired:"存取權杖為必填項",githubBackupEnabled:"GitHub 備份已啟用",tokenUpdated:"權杖已更新",settingsSaved:"設定已儲存",failedToSave:"儲存失敗：{{message}}",backupCompleteFiles:"備份完成 - {{count}} 個檔案已更新",backupSkippedNoChanges:"備份已跳過 - 無更改",backupFailed2:"備份失敗：{{message}}",clearedLogs:"已清除 {{count}} 條日誌",failedToClearLogs:"清除日誌失敗：{{message}}",history:"歷史紀錄",clear:"清除",date:"日期",status:"狀態",commit:"提交",localBackup:"本機備份",localBackupDescription:"建立 Bambuddy 資料的完整備份，包括資料庫、檔案、上傳和所有檔案。",downloadBackupLabel:"下載備份",completeBackupZip:"完整備份：資料庫 + 所有檔案（ZIP）",download:"下載",preparingBackup:"正在準備備份...",creatingArchive:"正在建立備份歸檔...對於大型歸檔可能需要一些時間。",downloadingFile:"正在下載備份檔案...",backupDownloaded:"備份下載成功",failedToCreateBackup:"建立備份失敗：{{message}}",restore:"恢復",restoreReplacesAll:"恢復將替換所有資料。",restoreReplacesAllDetail:"您目前的資料庫和檔案將被完全替換。恢復後需要重新啟動。",restoreConfirmTitle:"恢復備份",restoreConfirmMessage:'您確定要從"{{filename}}"恢復嗎？這將完全替換您目前的資料庫和所有檔案。恢復後需要重新啟動應用程式。',restoreConfirmButton:"恢復備份",uploadingFile:"正在上傳備份檔案...",backupRestoredRestart:"備份已恢復。請重新啟動 Bambuddy。",failedToRestore:"恢復備份失敗。請檢查檔案格式。",reloadNow:"立即重新載入",creatingBackup:"正在建立備份",restoringBackup:"正在恢復備份",preparing:"準備中...",processing:"處理中...",doNotClosePage:"請不要關閉此頁面或離開頁面。對於大型備份，此操作可能需要幾分鐘。",restoring:"恢復中...",restoreComplete:"恢復完成",restoreFailed2:"恢復失敗",importSettings:"從備份檔案匯入設定",pleaseWaitRestoring:"請等待資料恢復中",selectBackupFile:"點選選擇備份檔案（.json 或 .zip）",duplicateHandling:"重複項處理方式：",matchPrinters:"印表機",matchPrintersBy:"按序列號匹配",matchSmartPlugs:"智慧插座",matchSmartPlugsBy:"按 IP 位址匹配",matchNotificationProviders:"通知提供者",matchNotificationProvidersBy:"按名稱匹配",matchFilaments:"耗材",matchFilamentsBy:"按名稱 + 類型 + 品牌匹配",matchArchives:"檔案",matchArchivesBy:"按內容雜湊匹配（始終跳過）",matchPendingUploads:"待上傳",matchPendingUploadsBy:"按檔名匹配",matchSettingsTemplates:"設定和範本",matchSettingsTemplatesBy:"始終覆蓋",replaceExisting:"替換現有資料",keepExisting:"保留現有資料",overwriteDescription:"用備份資料覆蓋已存在的項目",keepDescription:"僅恢復尚不存在的項目",overwriteCaution:"注意：",overwriteWarning:"覆蓋將用備份資料替換您目前的設定。出於安全考慮，印表機存取碼永遠不會被覆蓋。",cancel:"取消",processingBackup:"正在處理備份檔案...",itemsRestored:"已恢復項目",itemsSkipped:"已跳過項目",restored:"已恢復",skippedAlreadyExist:"已跳過（已存在）",filesCategory:"檔案（3MF、縮圖等）",andMore:"...還有 {{count}} 項",newApiKeysGenerated:"已產生新的 API 金鑰",keysShownOnce:"這些金鑰僅顯示一次。請立即複製！",copy:"複製",noDataFound:"在備份檔案中未找到可恢復的資料。",close:"關閉",scheduledBackup:"排程備份",scheduledBackupDescription:"依排程自動建立備份快照。輸出目錄可掛載到 NAS 或外部儲存。",frequency:"頻率",backupTime:"時間",retention:"保留",retentionDescription:"保留的備份數量",outputPath:"輸出路徑",outputPathPlaceholder:"預設：{{path}}",outputPathDescription:"留空以使用預設位置",runNow:"立即執行",backupFiles:"備份檔案",noScheduledBackups:"尚無備份",deleteBackup:"刪除",deleteBackupConfirm:"要刪除此備份檔案嗎？",backupRunning:"備份進行中…",scheduledBackupComplete:"備份已成功完成",scheduledBackupFailed:"備份失敗",nextBackup:"下次備份",backupSize:"大小",localTimeHint:"本地時間 ({{tz}})",defaultPathLabel:"預設：",categories:{settings:"設定",notification_providers:"通知提供者",notification_templates:"通知範本",smart_plugs:"智慧插座",printers:"印表機",filaments:"耗材",maintenance_types:"維護類型",archives:"檔案",projects:"專案",pending_uploads:"待上傳",external_links:"外部連結",api_keys:"API 金鑰"}},tags:{title:"標籤",addTag:"新增標籤",editTag:"編輯標籤",deleteTag:"刪除標籤",tagName:"標籤名稱",tagColor:"標籤顏色",noTags:"無標籤",deleteConfirm:"確定要刪除此標籤嗎？",manageTags:"管理標籤"},uploadModal:{title:"上傳 3MF 檔案",dragDrop:"將 .3mf 檔案拖放到此處",or:"或",browseFiles:"瀏覽檔案",extractionInfo:"將從 3MF 檔案中繼資料中自動提取印表機型號。",uploaded:"已上傳",failed:"失敗",uploading:"上傳中...",upload:"上傳",uploadFailed:"上傳失敗"},editArchive:{title:"編輯歸檔",name:"名稱",namePlaceholder:"列印名稱",printer:"印表機",noPrinter:"無印表機",project:"專案",noProject:"無專案",itemsPrinted:"列印數量",itemsPrintedHelp:"此列印任務中生產的物品數量",notes:"備註",notesPlaceholder:"新增關於此列印的備註...",externalLink:"外部連結",externalLinkPlaceholder:"https://printables.com/model/...",externalLinkHelp:"連結到 Printables、Thingiverse 或其他來源",tags:"標籤",tagsPlaceholder:"新增標籤...",addMoreTags:"新增更多標籤...",matchingTags:'匹配"{{query}}"',existingTags:"現有標籤",clickToAdd:"（點選新增）",status:"狀態",failureReason:"失敗原因",selectReason:"選擇原因...",photos:"列印成品照片",photosHelp:"點選 + 新增列印成品照片",printResult:"列印成品",saving:"儲存中...",failureReasons:{adhesionFailure:"附著力失敗",spaghettiDetached:"拉絲 / 脫落",layerShift:"層偏移",cloggedNozzle:"噴嘴堵塞",filamentRunout:"耗材用完",warping:"翹曲",stringing:"拉絲",underExtrusion:"擠出不足",powerFailure:"斷電",userCancelled:"使用者取消",other:"其他"},statuses:{completed:"已完成",failed:"失敗",aborted:"已取消",printing:"列印中"}},kProfiles:{title:"K 值設定",noPrintersConfigured:"未設定印表機",addPrinterInSettings:"在設定中新增印表機以管理 K 值設定",noActivePrinters:"無活躍印表機",enablePrinterConnection:"啟用印表機連線以檢視其 K 值設定",loadingProfiles:"載入 K 值設定中...",printerOffline:"印表機離線",printerOfflineDesc:"所選印表機未連線。開啟電源以檢視 K 值設定。",noMatchingProfiles:"無匹配的設定",noMatchingProfilesDesc:"沒有設定匹配您的搜尋條件",noKProfiles:"無 K 值設定",noKProfilesDesc:"未找到 {{diameter}}mm 噴嘴的壓力推進設定",createFirstProfile:"建立第一個設定",printer:"印表機",nozzle:"噴嘴",refresh:"重新整理",addProfile:"新增設定",export:"匯出",import:"匯入",select:"選擇",selectAll:"全選",delete:"刪除",searchPlaceholder:"按名稱或耗材搜尋...",allExtruders:"所有擠出機",leftOnly:"僅左側",rightOnly:"僅右側",allFlow:"所有流量",hfOnly:"僅高流量",sOnly:"僅標準",sortName:"排序：名稱",sortKValue:"排序：K 值",sortFilament:"排序：耗材",leftExtruder:"左擠出機",rightExtruder:"右擠出機",modal:{addTitle:"新增 K 值設定",editTitle:"編輯 K 值設定",profileName:"設定名稱",profileNamePlaceholder:"我的 PLA 設定",kValue:"K 值",kValuePlaceholder:"0.020",kValueHelp:"典型範圍：PLA 0.01 - 0.06，PETG 0.02 - 0.10",filament:"耗材",selectFilament:"選擇耗材...",noFilamentsHelp:"未找到耗材。請先在 Bambu Studio 中建立 K 值設定。",flowType:"流量類型",highFlow:"高流量",standard:"標準",nozzleSize:"噴嘴尺寸",extruder:"擠出機",extruders:"擠出機",left:"左",right:"右",notes:"備註（本機儲存）",notesPlaceholder:"新增關於此設定的備註...",notesHelp:"備註儲存在 Bambuddy 中，不在印表機上",syncing:"與印表機同步中...",savingExtruder:"儲存到擠出機 {{current}}/{{total}}...",pleaseWait:"請稍候"},deleteConfirm:{title:"刪除設定",cannotUndo:"此操作無法復原",message:'確定要從印表機刪除"{{name}}"嗎？'},bulkDelete:{title:"刪除設定",cannotUndo:"此操作無法復原",message:"確定要從印表機刪除 {{count}} 個選中的設定嗎？"},toast:{profileSaved:"K 值設定已儲存",profilesSaved:"K 值設定已儲存到 {{count}} 個擠出機",selectAtLeastOneExtruder:"請至少選擇一個擠出機",profileDeleted:"K 值設定已刪除",profilesDeleted:"已刪除 {{count}} 個設定",exportedProfiles:"已匯出 {{count}} 個設定",importedProfiles:"已匯入 {{count}} / {{total}} 個設定",noProfilesToExport:"無可匯出的設定",invalidFileFormat:"無效的檔案格式",failedToParseImport:"解析匯入檔案失敗",failedToSaveBatch:"批次儲存 K 值設定失敗",noteSaved:"備註已儲存",failedToSaveNote:"儲存備註失敗"},permission:{noRead:"您沒有重新整理設定的權限",noCreate:"您沒有新增設定的權限",noUpdate:"您沒有更新 K 值設定的權限",noDelete:"您沒有刪除 K 值設定的權限",noExport:"您沒有匯出設定的權限",noImport:"您沒有匯入設定的權限"}},virtualPrinter:{title:"虛擬印表機",running:"執行中",stopped:"已停止",description:{default:"啟用虛擬印表機，使其在 Bambu Studio 和 OrcaSlicer 中可見。傳送到此印表機的檔案將直接歸檔而不列印。",proxy:"啟用代理，將切片軟體流量中繼到真實印表機，允許在任何網路上遠端列印。"},enable:{title:"啟用虛擬印表機",visibleInSlicer:'在切片軟體發現中顯示為"Bambuddy"',proxyingTo:"代理到 {{name}}",notActive:"未啟用"},model:{title:"印表機型號",description:"選擇要模擬的印表機型號。",restartWarning:"更改型號將重新啟動虛擬印表機"},accessCode:{title:"存取碼",isSet:"存取碼已設定",notSet:"未設定存取碼 - 需要設定才能啟用",placeholder:"輸入 8 位字元程式碼",placeholderChange:"輸入新程式碼以更改",hint:"必須恰好 8 個字元。切片軟體使用此程式碼進行認證。",charCount:"({{count}}/8)"},targetPrinter:{title:"目標印表機",configured:"代理目標已設定",notConfigured:"未選擇目標印表機 - 代理模式需要設定",placeholder:"選擇印表機...",hint:"選擇要將切片軟體流量代理到的印表機。印表機必須處於區域網路模式。",noPrinters:"未設定印表機。請先新增印表機以使用代理模式。"},remoteInterface:{title:"網路介面覆蓋",configured:"介面覆蓋已啟用",optional:"可選 - 當自動檢測的 IP 不正確時使用（例如多網路卡、Docker、VPN）",placeholder:"自動檢測（預設）...",hint:"覆蓋透過 SSDP 廣播並在 TLS 憑證中使用的 IP 位址。在 Bambuddy 有多個網路介面時很有用。"},mode:{title:"模式",archive:"歸檔",archiveDesc:"立即歸檔檔案",review:"審核",reviewDesc:"歸檔前審核",queue:"佇列",queueDesc:"歸檔並新增到佇列",proxy:"代理",proxyDesc:"中繼到真實印表機"},autoDispatch:{title:"自動派發",description:"新增到佇列時自動開始列印。關閉後，列印任務等待手動派發。"},queueForceColorMatch:{title:"強制顏色匹配",description:"拒絕派發到沒有完全相同耗材類型和顏色的印表機。預設關閉 — 不啟用時，佇列僅按型號匹配，可能選到顏色錯誤的印表機。"},tailscaleDisabled:{title:"Tailscale 整合",description:"啟用以將此 VP 標記為透過 Tailscale 公開。顯示主機的 Tailscale 位址，以便您知道要貼上到切片器中的 IP。CA 匯入步驟保持不變 — 此切換對憑證無影響。"},setupRequired:{title:"需要設定",description:"虛擬印表機功能需要額外的系統設定才能工作。包括埠轉發、防火牆規則和平臺特定設定。",readGuide:"啟用前請閱讀設定指南"},archiveNameSource:{title:"存檔名稱來源",description:'選擇透過虛擬印表機接收檔案時新存檔的命名方式。"元資料"使用 3MF 中嵌入的切片標題（預設）。"檔名"使用 Bambu Studio 透過 FTP 傳送的檔案名稱 — 當您在"傳送到印表機"對話方塊中重新命名工作時非常有用。',metadata:"元資料",filename:"檔名"},caCert:{title:"切片軟體憑證",description:"虛擬印表機使用由 Bambuddy CA 簽發的 TLS 憑證。將此 CA 憑證匯入切片軟體的信任庫一次，切片軟體即可接受連線 — 無需再透過命令列取得。",copy:"複製",copied:"已複製",download:"下載",fingerprint:"SHA-256"},howItWorks:{title:"工作原理",step1:"在同一區域網路中，虛擬印表機會透過發現機制自動出現在您的切片軟體（Bambu Studio / OrcaSlicer）中。從其他網路，透過 IP 位址和存取碼手動新增。",step2:'在歸檔、審核和佇列模式下，使用切片軟體中的"傳送"按鈕將 3MF 檔案上傳到 Bambuddy。切片軟體會顯示"列印成功"— 檔案已儲存，未列印。',step3:"在代理模式下，虛擬印表機將所有流量中繼到真實印表機 — 列印會立即開始，就像直接連線一樣。"},status:{title:"狀態詳情",printerName:"印表機名稱",model:"型號",serialNumber:"序列號",mode:"模式",pendingFiles:"待處理檔案",targetPrinter:"目標印表機",ftpPort:"FTP 連接埠",mqttPort:"MQTT 連接埠",ftpConnections:"FTP 連線",mqttConnections:"MQTT 連線"},toast:{updated:"虛擬印表機設定已更新",failedToUpdate:"更新設定失敗",copyFailed:"複製失敗 — 請手動選取文字",accessCodeRequired:"請先設定存取碼",targetPrinterRequired:"請先選擇目標印表機",bindIpRequired:"請先設定繫結 IP",accessCodeEmpty:"存取碼不能為空",accessCodeLength:"存取碼必須恰好 8 個字元",created:"虛擬印表機已建立",failedToCreate:"建立虛擬印表機失敗",deleted:"虛擬印表機已刪除",failedToDelete:"刪除虛擬印表機失敗"},list:{title:"虛擬印表機",add:"新增",addFirst:"新增虛擬印表機",empty:"未設定虛擬印表機。新增一個以開始使用。"},bindIp:{title:"繫結介面",placeholder:"選擇介面...",hint:"此虛擬印表機繫結的網路介面。每臺印表機必須唯一。"},proxy:{accessCodeHint:"在代理模式下，在切片軟體中使用目標印表機的存取碼。連線會透明轉發到真實印表機。"},addDialog:{title:"新增虛擬印表機",name:"名稱",hint:"建立後可以設定存取碼、目標印表機和其他設定。",create:"建立"},deleteConfirm:{title:"刪除虛擬印表機",message:'確定要刪除"{{name}}"嗎？這將停止此印表機的所有服務。'}},modelViewer:{openInSlicer:"在切片軟體中開啟",tabs:{model:"3D 模型",gcode:"G-code 預覽"},notAvailable:"不可用",notSliced:"未切片",plates:"板",allPlates:"所有板",plateNumber:"板 {{number}}",plateCount:"{{count}} 個板",plateCount_other:"{{count}} 個板",objectCount:"{{count}} 個物件",objectCount_other:"{{count}} 個物件",filamentCount:"{{count}} 種耗材",filamentCount_other:"{{count}} 種耗材",eta:"預計 {{minutes}} 分鐘",noPreview:"此檔案無可用預覽",pagination:{pageOf:"第 {{current}} / {{total}} 頁",prev:"上一頁",next:"下一頁"},errors:{failedToLoad:"載入檔案失敗",noMeshes:"3MF 檔案中未找到網格",unsupportedFormat:"不支援的檔案格式"}},maintenanceDescriptions:{lubricateCarbonRods:"在碳纖維杆上塗抹潤滑劑以確保順暢運動",lubricateRails:"在線性導軌上塗抹潤滑劑以確保順暢運動",cleanNozzle:"清潔熱端和噴嘴以防止堵塞",checkBelts:"檢查皮帶張力以確保列印精度",cleanBuildPlate:"清潔列印板以獲得更好的附著力",checkExtruder:"檢查擠出機齒輪磨損情況",checkCooling:"確保冷卻風扇正常工作",generalInspection:"印表機綜合檢查",cleanCarbonRods:"清潔碳纖維杆以減少摩擦",lubricateSteelRods:"在鋼杆上塗抹潤滑劑以確保順暢運動",cleanSteelRods:"清潔鋼杆以減少摩擦",cleanLinearRails:"擦拭線性導軌以清除灰塵和碎屑",checkPtfeTube:"檢查 PTFE 管的磨損或損壞",replaceHepaFilter:"更換 HEPA 過濾器以保證空氣品質",replaceCarbonFilter:"更換活性炭過濾器",lubricateLeftNozzleRail:"潤滑左噴嘴導軌（H2 系列）"},smartPlugs:{offline:"離線",admin:"管理",openPlugAdminPage:"開啟插座管理頁面",deleteSmartPlug:"刪除智慧插座",turnOnSmartPlug:"開啟智慧插座",turnOffSmartPlug:"關閉智慧插座",turnOn:"開啟",turnOff:"關閉",addSmartPlug:{scanningNetwork:"掃描網路中...",chooseEntity:"選擇實體...",connectionFailed:"連線失敗",searchEntities:"搜尋實體...",searchPowerSensors:"搜尋功率感測器...",searchEnergySensors:"搜尋能量感測器...",placeholders:{plugName:"客廳插座",mqttStateOnValue:"ON、true、1",mqttSameAsPower:"與功率主題相同，或不同"}},linkedTo:"連結到：",monitorOnly:"僅監控",alerts:"警報",scheduleOn:"開啟 {{time}}",scheduleOff:"關閉 {{time}}",on:"開啟",off:"關閉",power:"功率",kwhToday:"今日kWh",settings:"設定",automationSettings:"自動化設定",showInSwitchbar:"在開關欄顯示",quickAccessSidebar:"從側邊欄快速存取",enabled:"已啟用",enableAutomation:"為此插座啟用自動化",autoOn:"自動開啟",autoOnDescription:"列印開始時開啟",autoOff:"自動關閉",autoOffDescription:"列印完成時關閉（一次性）",autoOffPersistent:"保持啟用",autoOffPersistentDescription:"在列印之間保持啟用而非一次性",autoOffAfterDrying:"乾燥完成後自動關閉",autoOffAfterDryingDescription:"AMS 乾燥完成後關閉",delayAfterDryingMinutes:"乾燥後延遲（分鐘）",turnOffDelayMode:"關閉延遲模式",time:"時間",temp:"溫度",delayMinutes:"延遲（分鐘）",tempThreshold:"溫度閾值（°C）",tempThresholdDescription:"當噴嘴冷卻到此溫度以下時關閉",edit:"編輯",deleteConfirm:'確定要刪除"{{name}}"嗎？此操作無法復原。',turnOnConfirm:'確定要開啟"{{name}}"嗎？',turnOffConfirm:'確定要關閉"{{name}}"嗎？這將切斷連線裝置的電源。',failedToTurn:'無法{{action}}"{{name}}"',unknown:"未知",addTitle:"新增智慧插座",editTitle:"編輯智慧插座",stopScanning:"停止掃描",discoverTasmota:"發現Tasmota裝置",foundDevices:"找到{{count}}個裝置 - 點選選擇：",noDevicesFound:"未在您的網路中找到Tasmota裝置",haNotConfigured:"Home Assistant未設定。請在以下位置設定",haSettingsPath:"設定 → 網路 → Home Assistant",selectEntity:"選擇實體 *",ipAddress:"IP 位址 *",nameLabel:"名稱 *",username:"使用者名稱",password:"密碼",authHint:"如果您的Tasmota裝置不需要認證，請留空",linkToPrinter:"連結印表機",noPrinter:"無印表機（僅手動控制）",linkingDescription:"連結後可在列印開始/完成時自動開關",powerAlerts:"功率警報",alertAbove:"高於時警報（W）",alertBelow:"低於時警報（W）",alertDescription:"當電力消耗超過這些閾值時收到通知。留空以停用該方向。",dailySchedule:"每日計畫",turnOnAt:"開啟時間",turnOffAt:"關閉時間",scheduleDescription:"每天在這些時間自動開關插座。留空以跳過該操作。",showOnPrinterCard:"在印表機卡片上顯示",displayOnPrinterCard:"在印表機卡片上顯示按鈕",connectedResult:"已連線！",deviceLabel:"裝置：{{name}} - ",stateLabel:"狀態：{{state}}",test:"測試",delete:"刪除",save:"儲存",add:"新增",cancel:"取消",failedToStartScan:"無法開始掃描",nameRequired:"名稱為必填項",entityRequired:"Home Assistant插座需要實體",mqttTopicRequired:"必須為功率、能源或狀態監控設定至少一個MQTT主題",loadingEntities:"正在載入實體...",loading:"載入中...",failedToLoadEntities:"載入實體失敗：{{error}}",noEntitiesMatching:'未找到匹配"{{search}}"的實體',noEntitiesAvailable:"無可用實體",searchingEntities:"搜尋所有實體（找到{{count}}個）",showingEntities:"顯示 switch、light、input_boolean（{{count}}個可用）",energyMonitoringOptional:"能源監控（可選）",energyMonitoringHint:"搜尋並選擇提供功率/能源資料的感測器。",powerSensorW:"功率感測器（W）",energyTodayKwh:"今日能源（kWh）",totalEnergyKwh:"總能源（kWh）",noMatchingSensors:"無匹配的感測器",none:"無",mqttNotConfigured:"MQTT代理未設定。請在以下位置設定代理地址",mqttSettingsPath:"設定 → 網路 → MQTT發布",mqttNotConfiguredSuffix:"（您不需要啟用發布，只需填寫代理詳細資訊）。",mqttMonitorOnlyDescription:"MQTT插座透過MQTT訂閱接收功率/能源資料。開關控制不可用 - 請使用您的MQTT代理或家庭自動化系統。",powerMonitoring:"功率監控",energyMonitoring:"能源監控",stateMonitoring:"狀態監控",optional:"可選",topic:"主題",jsonPath:"JSON路徑",multiplier:"乘數",onValue:"ON值",mqttPowerHint:`JSON路徑從JSON負載中提取值（例如"power_l1"）。如果主題發布原始數值，請留空。
 乘數：mW→W使用0.001，kW→W使用1000。`,mqttEnergyHint:`JSON路徑從JSON負載中提取值。原始值請留空。
 乘數：Wh→kWh使用0.001，MWh→kWh使用1000。`,mqttStateHint:`JSON路徑從JSON負載中提取值。原始值請留空。
-ON值：表示"ON"的確切字串。留空以自動檢測（ON、true、1）。`,restControl:"控制",restOnUrl:"開啟 URL",restOffUrl:"關閉 URL",restOnBody:"開啟請求內容",restOffBody:"關閉請求內容",restMethod:"HTTP 方法",restHeaders:"自訂標頭（JSON）",restStatusUrl:"狀態 URL",restStatusPath:"狀態 JSON 路徑",restStatusOnValue:"ON 值",restPowerUrl:"功率URL",restPowerPath:"功率 JSON 路徑",restPowerMultiplier:"功率乘數",restEnergyUrl:"能耗URL",restEnergyPath:"能耗 JSON 路徑",restEnergyMultiplier:"能耗乘數",restUrlRequired:"REST 插座至少需要一個 URL（ON 或 OFF）",restHeadersHint:'例如：{"Authorization": "Bearer your-token"}',restBodyHint:'例如：ON、{"state": "on"}',restStatusHint:"用於輪詢目前狀態的 URL",restPathHint:"例如：state 或 data.power.status",restPowerUrlHint:"功率資料的獨立URL（留空則使用狀態URL）",restEnergyUrlHint:"能耗資料的獨立URL（留空則使用狀態URL）",restEnergyHint:"每個值可以使用獨立的URL，或回退到狀態 URL。使用乘數進行單位轉換（例如：0.001 將 Wh 轉換為 kWh）。",testConnection:"測試連線",connectionSuccess:"連線成功",noSwitchesInSwitchbar:"開關欄中沒有開關",enableSwitchbarHint:'在設定 > 智慧插座中啟用"在開關欄顯示"'},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"電子郵件",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"SMTP 電子郵件通知",telegram:"透過 Telegram 機器人傳送通知",discord:"透過 Webhook 傳送到 Discord 頻道",ntfy:"免費、可自託管的推送通知",pushover:"簡單、可靠的推送通知",callmebot:"透過 CallMeBot 免費傳送 WhatsApp 通知",webhook:"通用 HTTP POST 到任意 URL",homeassistant:"Home Assistant 儀表板中的持久通知"},lastSuccess:"上次：{{date}}",error:"錯誤",printer:"印表機：",allPrinters:"所有印表機",sendTestNotification:"傳送測試通知",eventSettings:"事件設定",enabled:"已啟用",sendFromProvider:"從此提供者傳送通知",printEvents:"列印事件",printerStatus:"印表機狀態",amsAlarms:"AMS 警報",amsHtAlarms:"AMS-HT 警報",printQueue:"列印佇列",start:"開始",plateCheck:"熱床檢測",complete:"完成",failed:"失敗",stopped:"已停止",progress:"進度",offline:"離線",lowFilament:"耗材不足",maintenance:"維護",amsHumidity:"AMS 濕度",amsTemp:"AMS 溫度",amsHtHumidity:"AMS-HT 濕度",amsHtTemp:"AMS-HT 溫度",bedCooled:"熱床已冷卻",firstLayer:"首層完成",quiet:"免打擾",digest:"摘要 {{time}}",printStarted:"列印已開始",plateNotEmpty:"熱床非空",plateNotEmptyDescription:"列印前偵測到物體",printCompleted:"列印已完成",bedCooledLabel:"熱床已冷卻",bedCooledDescription:"列印後熱床溫度降至閾值以下",firstLayerCompleteLabel:"首層列印完成",firstLayerCompleteDescription:"首層完成時傳送帶照片的通知",missingSpoolAssignmentLabel:"缺少料卷分配",missingSpoolAssignmentDescription:"當列印開始且所需料盤沒有分配料卷時傳送通知",printFailed:"列印失敗",printStopped:"列印已停止",progressMilestones:"進度里程碑",progressMilestonesDescription:"在 25%、50%、75% 時通知",printerOffline:"印表機離線",printerError:"印表機錯誤",lowFilamentLabel:"耗材不足",maintenanceDue:"需要維護",maintenanceDueDescription:"需要維護時通知",amsHumidityHigh:"AMS 濕度過高",amsHumidityHighDescription:"普通 AMS 濕度超過閾值",amsTemperatureHigh:"AMS 溫度過高",amsTemperatureHighDescription:"普通 AMS 溫度超過閾值",amsHtHumidityHigh:"AMS-HT 濕度過高",amsHtHumidityHighDescription:"AMS-HT 濕度超過閾值",amsHtTemperatureHigh:"AMS-HT 溫度過高",amsHtTemperatureHighDescription:"AMS-HT 溫度超過閾值",inventoryAlerts:"庫存警報",stockReorderAlert:"補貨警報",stockReorderAlertDescription:"SKU 已達到補貨點",stockBreakAlert:"斷貨警報",stockBreakAlertDescription:"庫存將在補貨到達前耗盡",jobAdded:"任務已新增",jobAddedDescription:"任務已新增到佇列",jobAssigned:"任務已分配",jobAssignedDescription:"基於模型的任務已分配給印表機",jobStarted:"任務已開始",jobStartedDescription:"佇列任務已開始列印",jobWaiting:"任務等待中",jobWaitingDescription:"任務正在等待耗材或印表機",jobSkipped:"任務已跳過",jobSkippedDescription:"任務已跳過（上一個失敗）",jobFailed:"任務失敗",jobFailedDescription:"任務啟動失敗",queueComplete:"佇列已完成",queueCompleteDescription:"所有佇列任務已完成",quietHours:"免打擾時段",noNotificationsDuring:"在此時段內不傳送通知",editProviderToChangeQuietHours:"編輯提供者以更改免打擾時段",dailyDigest:"每日摘要",batchNotifications:"將通知彙總為每日摘要",sendAt:"傳送於 {{time}}",editProviderToChangeDigestTime:"編輯提供者以更改摘要時間",edit:"編輯",deleteProvider:"刪除通知提供者",deleteConfirm:'確定要刪除"{{name}}"嗎？此操作無法復原。',delete:"刪除",addTitle:"新增通知提供者",editTitle:"編輯通知提供者",nameLabel:"名稱 *",namePlaceholder:"我的通知",providerTypeLabel:"提供者類型 *",configuration:"設定",testConfiguration:"測試設定",printerFilter:"印表機篩選",onlyFromPrinter:"僅傳送來自此印表機的事件通知",quietHoursDnd:"免打擾時段",quietStart:"開始",quietEnd:"結束",dailyDigestLabel:"每日摘要",sendDigestAt:"傳送摘要於",digestCollected:"事件將被收集並在此時間作為單條摘要傳送",notificationEvents:"通知事件",progressPercent:"（25%、50%、75%）",bedCooledAfterPrint:"（列印完成後）",eventPriority:{sectionTitle:"ntfy 優先級",helpNtfy:"為每個已啟用的事件選擇優先級。ntfy 使用它來升級提醒（聲音、可見性、推播行為）。此處未設定的級別將使用 ntfy 伺服器預設值。",min:"最低",low:"低",default:"預設",high:"高",urgent:"緊急"},cancel:"取消",save:"儲存",add:"新增",nameRequired:"名稱為必填項",fieldRequired:"{{field}}為必填項",phoneNumber:"電話號碼",apiKey:"API 金鑰",serverUrl:"伺服器 URL",topic:"主題",authToken:"認證權杖",userKey:"使用者金鑰",appToken:"應用程式權杖",priority:"優先順序",botToken:"機器人權杖",chatId:"聊天 ID",smtpServer:"SMTP 伺服器",smtpPort:"SMTP 連接埠",security:"安全",authentication:"認證",username:"使用者名稱",password:"密碼",fromEmail:"寄件人信箱",toEmail:"收件人信箱",webhookUrl:"Webhook URL",payloadFormat:"負載格式",authorization:"授權",titleFieldName:"標題欄位名",messageFieldName:"訊息欄位名",editTemplate:"編輯範本：{{name}}",titleLabel:"標題",bodyLabel:"正文",titlePlaceholder:"通知標題...",bodyPlaceholder:"通知正文...",availableVariables:"可用變數",clickToInsert:"點選插入到正文游標位置",livePreview:"即時預覽",hide:"隱藏",show:"顯示",loadingPreview:"載入預覽中...",enterTemplateContent:"輸入範本內容以檢視預覽",titlePreview:"標題：",bodyPreview:"正文：",resetToDefault:"恢復預設",titleRequired:"標題為必填項",bodyRequired:"正文為必填項",notificationLog:"通知日誌",showFailedOnly:"僅顯示失敗",last24Hours:"最近 24 小時",last7Days:"最近 7 天",last30Days:"最近 30 天",last90Days:"最近 90 天",justNow:"剛剛",noFailedNotifications:"沒有失敗的通知",noNotificationsLogged:"沒有通知紀錄",unknownProvider:"未知提供者",logTitle:"標題",logMessage:"訊息",logError:"錯誤",logProvider:"提供者：{{type}}",logTime:"時間：{{time}}",refresh:"重新整理",clearOld:"清除舊紀錄",statsSummary:"最近 {{days}} 天：",statsNotifications:"條通知",statsSent:"{{count}} 條已傳送",statsFailed:"{{count}} 條失敗",eventTypes:{print_start:"列印已開始",print_complete:"列印完成",print_failed:"列印失敗",print_stopped:"列印已停止",print_progress:"進度",printer_offline:"印表機離線",printer_error:"印表機錯誤",filament_low:"耗材不足",maintenance_due:"需要維護",test:"測試"},userEmail:{title:"通知",emailNotifications:"郵件通知",emailNotificationsDesc:"接收您自己列印任務的郵件通知。郵件將透過進階身份驗證中設定的 SMTP 設定傳送。",sendingTo:"通知將傳送至",noEmailWarning:"您的帳戶沒有郵件地址。請聯絡管理員新增。",printJobNotifications:"列印任務通知",printJobNotificationsDesc:"選擇哪些事件會觸發您提交的列印任務的郵件通知。",printJobStarts:"列印任務開始",printJobStartsDesc:"當您的列印任務開始時收到通知。",printJobFinishes:"列印任務完成",printJobFinishesDesc:"當您的列印任務成功完成時收到通知。",printErrors:"列印錯誤",printErrorsDesc:"當您的列印任務失敗或遇到錯誤時收到通知。",printJobStops:"列印任務停止",printJobStopsDesc:"當您的列印任務被取消或停止時收到通知。",saveSuccess:"通知偏好設定已儲存。",saveError:"儲存通知偏好設定失敗。"}},richTextEditor:{bold:"粗體",italic:"斜體",underline:"底線",bulletList:"無序列表",numberedList:"有序列表",alignLeft:"左對齊",alignCenter:"居中對齊",alignRight:"右對齊",addLink:"新增連結",removeLink:"移除連結"},externalLinks:{noLinksConfigured:"未設定外部連結",deleteLink:"刪除連結",removeCustomIcon:"移除自訂圖示",openInNewTab:"在新標籤頁中開啟",placeholders:{linkName:"我的連結"}},keyboardShortcuts:{title:"鍵盤快捷鍵",navigation:"導航",archivesSection:"歸檔",kProfilesSection:"K 值設定",generalSection:"通用",shortcuts:{goToPrinters:"前往印表機",goToArchives:"前往歸檔",goToQueue:"前往佇列",goToStats:"前往統計",goToProfiles:"前往雲端設定",goToSettings:"前往設定",focusSearch:"聚焦搜尋",openUploadModal:"開啟上傳對話方塊",clearSelection:"清除選擇 / 取消焦點",contextMenu:"卡片右鍵選單",refreshProfiles:"重新整理設定",newProfile:"新增設定",exitSelectionMode:"結束選擇模式",showHelp:"顯示此協助"},footer:"按 Esc 或點選外部關閉"},notificationLog:{title:"通知日誌",events:{printStarted:"列印開始",printComplete:"列印完成",printFailed:"列印失敗",printStopped:"列印停止",progress:"進度",printerOffline:"印表機離線",printerError:"印表機錯誤",lowFilament:"耗材不足",maintenanceDue:"維護到期",test:"測試"},timeAgo:{justNow:"剛剛",minutesAgo:"{{minutes}} 分鐘前",hoursAgo:"{{hours}} 小時前"}},restoreBackup:{title:"恢復備份",restoring:"恢復中...",restoreComplete:"恢復完成",restoreFailed:"恢復失敗",importSettings:"從備份檔案匯入設定",pleaseWait:"請稍候，正在恢復您的資料",clickToSelect:"點選選擇備份檔案（.json 或 .zip）",howDuplicateHandling:"重複處理方式：",categories:{printers:"印表機",smartPlugs:"智慧插座",notificationProviders:"通知提供者",filaments:"耗材",archives:"歸檔",pendingUploads:"待處理上傳",settingsTemplates:"設定和範本"},matchingInfo:{printers:"按序列號匹配",smartPlugs:"按 IP 位址匹配",notificationProviders:"按名稱匹配",filaments:"按名稱 + 類型 + 品牌匹配",archives:"按內容雜湊匹配",pendingUploads:"按檔名匹配",settingsTemplates:"始終覆蓋"},replaceExisting:"替換現有資料",keepExisting:"保留現有資料",replaceDescription:"用備份資料覆蓋已存在的項目",keepDescription:"僅恢復不存在的項目",caution:"注意：",cautionText:"覆蓋將用備份資料替換您目前的設定。出於安全考慮，印表機存取碼永遠不會被覆蓋。",itemsRestored:"已恢復項目",itemsSkipped:"已跳過項目",restored:"已恢復",skipped:"已跳過（已存在）",filesLabel:"檔案（3MF、縮圖等）",newApiKeysGenerated:"已產生新 API 金鑰",newApiKeysWarning:"這些金鑰僅顯示一次。請立即複製！",processingBackup:"處理備份檔案中...",noDataFound:"備份檔案中未找到可恢復的資料。",failedToRestore:"恢復備份失敗。請檢查檔案格式。"},backupExport:{title:"匯出備份",selectData:"選擇要包含的資料",selectAll:"全選",selectNone:"全不選",categoryDescriptions:{settings:"語言、主題、更新偏好",notifications:"ntfy、Pushover、Discord 等",templates:"自訂訊息範本",smartPlugs:"Tasmota 插座設定",externalLinks:"側邊欄外部服務連結",printers:"印表機資訊（不含存取碼）",plateDetection:"空列印板參考影像",filaments:"耗材類型和成本",maintenance:"自訂維護計畫",archives:"所有列印資料 + 檔案（3MF、縮圖、照片）",projects:"專案、材料清單和附件",pendingUploads:"虛擬印表機待審核的上傳",apiKeys:"Webhook API 金鑰（匯入時產生新金鑰）"},requiresPrinters:"需要選擇印表機",zipFileWarning:"將建立 ZIP 檔案。",zipFileDescription:"包括所有 3MF 檔案、縮圖、縮時攝影和照片。這可能需要一些時間並產生較大的檔案。",includeAccessCodes:"包含存取碼",includeAccessCodesDescription:"用於轉移到另一臺機器",includeAccessCodesWarning:"存取碼將以明文形式包含。請妥善保管此備份檔案！",categoriesSelected:"已選擇 {{selectedCount}} 個類別"},pendingUploads:{placeholders:{notes:"新增關於此列印的備註..."},discardUpload:"丟棄上傳",archiveAllUploads:"歸檔所有上傳",discardAllUploads:"丟棄所有上傳",archive:"歸檔",timeAgo:{justNow:"剛剛",minutesAgo:"{{minutes}} 分鐘前",hoursAgo:"{{hours}} 小時前",daysAgo:"{{days}} 天前"}},apiBrowser:{placeholders:{requestBody:"JSON 請求體...",searchEndpoints:"搜尋端點..."}},configureAmsSlot:{title:"設定 AMS 槽位",slotConfigured:"槽位已設定！",configuringSlot:"正在設定槽位：",slotLabel:"{{ams}} 槽位 {{slot}}",searchPresets:"搜尋預設...",colorPlaceholder:"顏色名稱或十六進位（例如：棕色、FF8800）",clearCustomColor:"清除自訂顏色",noCloudPresets:"無雲端預設。登入拓竹雲以同步。",noPresetsAvailable:"無可用預設。登入拓竹雲或匯入本機設定。",noMatchingPresets:"未找到匹配的預設。",custom:"自訂",builtin:"內建",settingsSentToPrinter:"設定已傳送到印表機",filamentProfile:"耗材設定",kProfileLabel:"K 值設定（壓力推進）",filteringFor:"篩選：{{material}}",noKProfile:"無 K 值設定（使用預設值 0.020）",noMatchingKProfiles:"未找到匹配的 K 值設定。將使用預設 K=0.020。",selectFilamentFirst:"請先選擇耗材設定",kFromCalibration:"K={{value}}（來自印表機校準）",customColorLabel:"自訂顏色（可選）",presetColors:"{{name}} 顏色：",showLessColors:"顯示更少顏色",showMoreColors:"顯示更多顏色",clear:"清除",hexLabel:"十六進位：#{{hex}}",resetting:"重設中...",resetSlot:"重設槽位",cancel:"取消",configuring:"設定中...",configureSlot:"設定槽位"},githubBackup:{title:"Git 備份",history:"歷史",downloadBackup:"下載備份",restoreBackup:"恢復備份",noBackupsYet:"尚無備份"},emailSettings:{placeholders:{fromName:"Bambuddy"}},tagManagement:{searchTags:"搜尋標籤...",renameTag:"重新命名標籤",deleteTag:"刪除標籤"},notificationTemplates:{placeholders:{title:"通知標題...",body:"通知正文..."}},batchTag:{placeholders:{newTag:"輸入新標籤..."}},photoGallery:{deletePhoto:"刪除照片"},filamentHoverCard:{copySpoolUuid:"複製耗材 UUID"},kProfilesView:{hasNote:"有備註",copyProfile:"複製設定"},layout:{openMenu:"開啟選單",noPermissionSystemInfo:"您沒有檢視系統資訊的權限"},dashboard:{dragToReorder:"拖曳以重新排列",hideWidget:"隱藏小工具"},notificationProviderCard:{deleteNotificationProvider:"刪除通知提供者"},fileManagerModal:{closeFileManager:"關閉檔案管理器",sortFiles:"排序檔案",goToParentFolder:"返回上級資料夾",threeView:"3D 檢視"},embeddedCameraViewer:{refreshStream:"重新整理流",close:"關閉",zoomOut:"縮小",resetZoom:"重設縮放",zoomIn:"放大",dragToResize:"拖曳調整大小"},timelapseViewer:{skipBack5s:"後退 5 秒",skipForward5s:"前進 5 秒"},notificationProviders:{descriptions:{email:"SMTP 郵件通知",telegram:"透過 Telegram 機器人通知",discord:"透過 Webhook 傳送到 Discord 頻道",ntfy:"免費、可自託管的推送通知",pushover:"簡單、可靠的推送通知",callmebot:"透過 CallMeBot 的免費 WhatsApp 通知",webhook:"通用 HTTP POST 到任意 URL"}},logViewer:{searchPlaceholder:"搜尋訊息或日誌名稱...",noLogEntries:"未找到日誌條目"},switchbarPopover:{noSwitchesInSwitchbar:"切換欄中沒有開關"},projectPageModal:{placeholders:{title:"標題",designer:"設計師",license:"許可證",description:"輸入描述...",profileTitle:"設定標題",profileDescription:"設定描述..."}},spoolmanSettings:{},time:{unknown:"-",waiting:"等待中",justNow:"剛剛",now:"現在",minsAgo:"{{count}} 分鐘前",inMins:"{{count}} 分鐘後",hoursAgo:"{{count}} 小時前",inHours:"{{count}} 小時後",daysAgo:"{{count}} 天前",inDays:"{{count}} 天後"},spoolbuddy:{nav:{dashboard:"儀表板",ams:"AMS",inventory:"庫存",writeTag:"寫入",settings:"設定"},status:{nfcReady:"NFC 就緒",nfcOff:"NFC 關閉",offline:"離線",online:"線上",noPrinters:"無印表機",deviceOffline:"裝置離線",waitingConnection:"等待裝置連線...",systemReady:"系統就緒",status:"狀態"},dashboard:{readyToScan:"準備掃描",idleMessage:"將耗材放在磅秤上以識別",nfcHint:"NFC 標籤將自動讀取",device:"裝置",syncWeight:"同步重量",weightSynced:"已同步！",unknownTag:"未知標籤",newTag:"偵測到新標籤",onScale:"在磅秤上",linkSpool:"連結到耗材",linkTagTitle:"將標籤連結到耗材",linkTag:"連結標籤",selectSpool:"選擇要連結此標籤的耗材：",noUntagged:"未找到沒有標籤的耗材",tagDetected:"偵測到標籤",noTag:"無標籤",tagId:"標籤",grossWeight:"毛重",spoolSize:"耗材盤尺寸",close:"關閉",currentSpool:"目前耗材",plateReady:"熱床就緒: {{name}}",plateReadyLabel:"待清理的熱床",plateClearAction:"清理",plateClearedToast:"已將熱床標記為已清理",plateClearFailed:"無法將熱床標記為已清理"},modal:{spoolDetected:"偵測到耗材",assignToAms:"分配到 AMS",syncWeight:"同步重量",weightSynced:"已同步！",syncing:"同步中...",newTagDetected:"偵測到新標籤",addToInventory:"新增到庫存",assignToAmsTitle:"分配到 AMS",selectSlot:"選擇槽位",assign:"分配",assigning:"分配中...",assignSuccess:"已分配！",assignPendingInsert:"已分配。插入耗材後將設定槽位。",assignError:"分配耗材失敗。請重試。",noPrinterSelected:"選擇印表機...",noAmsDetected:"此印表機未偵測到 AMS",slot:"槽位"},weight:{noReading:"無讀數",stable:"穩定",measuring:"測量中...",tare:"去皮",calibrate:"校準"},spool:{remaining:"剩餘",material:"材料",brand:"品牌",color:"顏色",coreWeight:"軸心重",labelWeight:"標籤重",scaleWeight:"磅秤重",netWeight:"淨重",lastUsed:"上次使用"},ams:{noData:"未偵測到 AMS",connectAms:"連線 AMS 以檢視耗材槽位",noPrinter:"未選擇印表機",selectPrinter:"從頂部欄選擇印表機",printerDisconnected:"印表機已斷開",humidity:"濕度",level:"餘量",active:"活躍",slot:"槽位",empty:"空"},inventory:{search:"搜尋耗材...",empty:"庫存中沒有耗材",noResults:"沒有匹配的耗材",spools:"個耗材",addSpool:"新增耗材"},settings:{tabDevice:"裝置",tabDisplay:"顯示",tabScale:"磅秤",tabUpdates:"更新",nfcReader:"NFC 讀卡器",type:"類型",connection:"連線",notConnected:"不適用",deviceInfo:"裝置資訊",hostname:"主機",uptime:"執行時間",systemConfig:"後端與認證",backendUrl:"Bambuddy 後端 URL",apiToken:"API 權杖",apiTokenPlaceholder:"輸入 API 權杖",saveConfig:"儲存設定",systemQueued:"設定已加入佇列。",nfcDiagnostic:"NFC 診斷",scaleDiagnostic:"磅秤診斷",readTagDiagnostic:"讀取標籤診斷",testNfc:"測試讀卡器",testScale:"測試精度",testReadTag:"讀取標籤",systemFieldsRequired:"後端 URL 為必填項。",brightness:"亮度",saved:"已儲存",noBacklight:"未偵測到 DSI 背光。亮度控制需要 DSI 螢幕。",screenBlank:"螢幕熄滅超時",screenBlankDesc:"不活動後螢幕關閉。觸控喚醒。",displayNote:"亮度作為軟體濾鏡套用。",scaleCalibration:"磅秤校準",currentWeight:"目前重量",tareOffset:"去皮",calFactor:"係數",knownWeight:"已知重量",calStep1:"移除磅秤上所有物品並按設定零點。",calStep2:"將已知重量放在磅秤上。",setZero:"設定零點",calibrateNow:"校準",calibrated:"已校準",tareSet:"去皮命令已傳送。等待裝置回應...",tareComplete:"去皮完成！",tareTimedOut:"去皮逾時 — SpoolBuddy 守護程序是否正在執行？",tareFailed:"傳送去皮命令失敗",zeroSet:"零點已設定。將已知重量放在磅秤上。",calibrationDone:"校準完成！",calibrationFailed:"校準失敗",lastCalibrated:"上次校準",stable:"穩定",settling:"穩定中...",firmware:"韌體",scale:"磅秤",noDevice:"未找到 SpoolBuddy 裝置",daemonVersion:"守護程式版本",currentVersion:"目前",versionPending:"等待守護程式...",checking:"檢查中...",checkUpdates:"檢查更新",updateAvailable:"有可用更新",updateInstructions:"透過 SSH 更新：執行 SpoolBuddy 安裝腳本進行升級。",upToDate:"已是最新",includeBeta:"包含測試版本"},writeTag:{tabExisting:"現有耗材",tabNew:"新耗材",tabReplace:"替換標籤",searchPlaceholder:"按材料、顏色、品牌搜尋...",noUntaggedSpools:"沒有無標籤的耗材",noTaggedSpools:"沒有有標籤的耗材",selectSpool:"選擇一個耗材，然後將空白 NTAG 放在讀卡器上",placeTag:"將 NTAG 放在讀卡器上",tagReady:"偵測到標籤 — 準備寫入",writeTag:"寫入標籤",replaceTag:"替換標籤",writing:"寫入標籤中...",waiting:"等待 SpoolBuddy...",writeSuccess:"標籤寫入成功！",writeFailed:"寫入失敗",queueFailed:"佇列寫入命令失敗",tryAgain:"重試",cancel:"取消",replaceWarning:"舊標籤將被取消連結。新標籤將替換它。",deviceOffline:"SpoolBuddy 離線",material:"材料",colorName:"顏色名稱",color:"顏色",brand:"品牌",weight:"重量 (g)",createSpool:"建立耗材",creating:"建立中...",spoolCreated:"耗材已建立！準備寫入。",createFailed:"建立耗材失敗",incompleteDataWarning:"已使用不完整的Spoolman資料寫入標籤"},quickMenu:{printerPower:"印表機電源",systemControls:"系統",restartDaemon:"重新啟動守護程式",restartBrowser:"重新啟動瀏覽器",reboot:"重新開機",shutdown:"關機",swipeToClose:"向下滑動關閉",confirmTitle:"確認",confirmShutdown:"確定要關閉 SpoolBuddy 嗎？您需要實體存取才能重新開啟。",confirmReboot:"確定要重新開機 SpoolBuddy 嗎？",confirmRestartDaemon:"重新啟動 SpoolBuddy 守護程式？NFC 和磅秤將暫時不可用。",confirmRestartBrowser:"重新啟動kiosk瀏覽器？螢幕將短暫變黑。",confirm:"確認",confirmPlugOn:"開啟 {{name}}？",confirmPlugOff:"關閉 {{name}}？",turnOn:"開啟",turnOff:"關閉"}},diagnostic:{modalTitle:"連線診斷 — {{name}}",running:"正在執行診斷...",runningElapsed:"正在執行診斷... ({{elapsed}}秒)",waitingForReportHint:"正在等待印表機發佈狀態報告 — 最長可能需要 {{max}} 秒。",runFailed:"無法執行診斷：{{error}}",retry:"重新執行",runButton:"執行診斷",sectionTitle:"連線診斷",sectionDescription:"檢查印表機無法連線或無法列印的原因 — 連接埠可達性、LAN 開發者模式、Docker 網路模式與認證資訊。",noPrinters:"未設定印表機。",overall:{ok:"未發現問題 — 印表機連線看起來正常。",warnings:"印表機應該可以運作，但有些項目需要注意。",problems:"發現了可解釋印表機無法連線或無法列印的問題。"},check:{port_mqtt:{title:"控制連接埠（MQTT 8883）",pass:"可達 — 印表機正在接受控制連線。",fail:"連接埠 8883 無法連線。印表機已關機、IP 位址不同，或被防火牆封鎖。請核實印表機 IP，並確保沒有任何東西封鎖連接埠 8883。"},port_ftps:{title:"檔案傳輸連接埠（FTPS 990）",pass:"可達 — 傳送列印檔案將正常運作。",warn:"連接埠 990 無法連線。監控可能仍然有效，但向印表機傳送列印工作將失敗。請確保連接埠 990 未被封鎖。"},port_rtsps:{title:"攝影機連接埠（RTSPS 322）",pass:"可達 — 攝影機串流將正常運作。",warn:"連接埠 322 無法連線。即時攝影機檢視將無法運作。這不影響列印。"},network_mode:{title:"Docker 網路模式",pass:"正在以 host 網路模式執行。",warn:'Bambuddy 正在以 Docker bridge 網路執行。印表機探索與虛擬印表機需要 host 網路模式 — 請使用 "network_mode: host" 重新建立容器。',skip:"未在 Docker 中執行 — 不適用。"},subnet:{title:"網路子網路",pass:"印表機與 Bambuddy 位於同一子網路。",warn:"印表機（{{printer_ip}}）與 Bambuddy（{{host_ip}}）位於不同的子網路。除非設定了子網路之間的路由，否則它們可能無法互相連線。",skip:"無法判定子網路 — 已略過。"},mqtt_auth:{title:"印表機認證資訊",pass:"印表機已接受連線。",fail:"印表機可達，但拒絕了連線。存取碼或序號很可能有誤。每次切換開發者模式時存取碼都會變更 — 請從印表機螢幕重新複製。",skip:"未檢查 — 無法連線到印表機。"},developer_mode:{title:"LAN 開發者模式",pass:"開發者模式已啟用。",fail:"印表機上的開發者模式已關閉。請在印表機的 LAN 設定中啟用它 — 並按 OK 確認。否則列印將無法開始。",skip:"無法檢查 — 需要與印表機的即時連線。"},printer_publishing:{title:"印表機正在發佈狀態",pass:"印表機正在發佈狀態更新 — AMS、耗材和 K 配置將正確鏡像到切片軟體。",fail:"MQTT 代理已接受連線，但印表機未發佈任何狀態報告。這幾乎總是因為序號錯誤或大小寫不一致 — device/<serial>/report 主題區分大小寫。請將印表機設定中的序號與印表機螢幕上的顯示進行核對。",skip:"無法檢查 — 需要與印表機的即時連線。"}}},systemHealth:{sectionTitle:"系統健康",sectionDescription:"掃描最近的日誌以找出已知問題，在它們演變成支援工單之前，通常你可以自行解決。",rescan:"重新掃描",clean:"在最近 {{times}} 筆日誌中未發現已知問題。",logUnavailable:"檔案日誌記錄已停用，因此無法掃描日誌。請啟用檔案日誌以使用此檢查。",learnMore:"如何解決",fixLabel:"解決方法：",occurrences:"出現 {{times}} 次 — 最近一次 {{lastSeen}}",category:{layer8:"你可以自行解決",environment:"環境",bug:"請回報此問題"},signature:{"ftp-auth-rejected":{name:"印表機拒絕了存取碼",cause:"印表機拒絕了檔案傳輸登入。存取碼錯誤，或在切換開發者模式後已變更。",fix:"從印表機螢幕（區域網路設定）重新複製存取碼，並在 Bambuddy 的印表機設定中更新。"},"ftp-connection-timeout":{name:"檔案傳輸連線逾時",cause:"Bambuddy 無法連線印表機的檔案傳輸連接埠（FTPS 990）。該連接埠被封鎖，或印表機已關機或位於其他子網路。",fix:"請確認 Bambuddy 與印表機之間的 990 連接埠未被封鎖，且兩者位於同一網路。"},"ftp-ssl-error":{name:"安全檔案傳輸交握失敗",cause:"與印表機檔案傳輸伺服器的 TLS 交握失敗。通常是防火牆或印表機韌體過舊所致。",fix:"請更新印表機韌體，並檢查沒有防火牆或代理伺服器攔截 990 連接埠上的連線。"},"mqtt-connection-flapping":{name:"印表機連線反覆中斷",cause:"控制連線（MQTT 8883）反覆中斷並重新連線——通常是網路訊號弱或連接埠被部分封鎖所致。",fix:"請檢查印表機附近的 Wi-Fi 訊號，盡量使用有線連線，並確認 8883 連接埠能夠穩定連線。"},"camera-connection-refused":{name:"無法存取攝影機串流",cause:"無法在 RTSPS 322 連接埠連線即時攝影機。該連接埠被封鎖，或印表機上的攝影機或區域網路即時影像已關閉。",fix:"請在印表機上啟用攝影機和區域網路即時影像，並確認 322 連接埠未被封鎖。這不會影響列印。"},"database-locked":{name:"資料庫寫入衝突",cause:'在負載下 SQLite 資料庫出現 "database is locked" 錯誤——同時使用多台印表機時較為常見。',fix:"請將 Bambuddy 切換到外部 PostgreSQL 資料庫。參見文件中的 PostgreSQL 指南。"}}},vpDiagnostic:{title:"設定檢查 — {{name}}",runButton:"執行設定檢查",running:"正在執行設定檢查...",runFailed:"無法執行設定檢查：{{error}}",retry:"重新執行",overall:{ok:"所有檢查均已通過 — 此虛擬印表機已正確設定。",warnings:"虛擬印表機應該可以運作，但有些方面需要注意。",problems:"發現的問題可以解釋切片軟體為何無法看到或使用此虛擬印表機。"},check:{enabled:{title:"虛擬印表機已啟用",fail:"此虛擬印表機已關閉。請將其開啟以使其可被探索。"},running:{title:"服務正在執行",fail:"虛擬印表機已啟用，但其服務未執行。請檢查 Bambuddy 記錄 — 通常是繫結 IP 衝突或權限錯誤使其停止。"},bind_interface:{title:"繫結網路介面",fail:"繫結介面未設定，或在此主機上已不存在。請在「繫結介面」下拉選單中選擇一個目前的介面。"},access_code:{title:"已設定存取碼",fail:"未設定存取碼。必須向切片軟體提供與您在此處設定的相同的 8 位存取碼。"},target_printer:{title:"目標印表機",fail:"未選擇目標印表機。代理模式需要一台實際的印表機進行轉送。",warn:"目標印表機目前處於離線狀態 — 重新連線後將恢復轉送。"},port_ftps:{title:"檔案上傳服務（連接埠 {{port}}）",fail:"繫結 IP 的連接埠 {{port}} 上沒有任何監聽，因此切片軟體無法上傳檔案。通常是此介面上的連接埠衝突所致。"},port_mqtt:{title:"控制服務（連接埠 {{port}}）",fail:"繫結 IP 的連接埠 {{port}} 上沒有任何監聽，因此切片軟體無法連線或顯示狀態。"},port_bind:{title:"探索服務（連接埠 {{port}}）",fail:"繫結 IP 的連接埠 {{port}} 上沒有任何監聽，因此切片軟體的探索交握會失敗。"},certificate:{title:"TLS 憑證",pass:"憑證已就緒。請確保已將 Bambuddy CA 憑證（上方）匯入切片軟體的信任庫。",fail:"此虛擬印表機的 TLS 憑證遺失。請檢查 Bambuddy 資料目錄是否可寫入。"}}},bugReport:{logHealthSummary:"在你的日誌中發現了已知問題",logHealthIntro:"最近的日誌與已知問題相符。請查看下方的解決方法——解決它們可能無需提交錯誤報告即可解決你的問題。你仍然可以在下方提交報告。",title:"報告錯誤",description:"描述",descriptionPlaceholder:"出了什麼問題？請描述問題...",email:"信箱（可選）",emailPlaceholder:"your@email.com",emailPrivacy:"如果提供，您的信箱將包含在GitHub Issue的摺疊部分中，以便維護者後續跟進。",screenshot:"截圖",uploadOrPaste:"上傳、貼上或拖曳圖片",dataCollectedSummary:"報告中包含哪些資料？",dataIncluded:"包含：",dataIncludedList:"應用程式版本、作業系統、架構、Python版本、資料庫統計（僅計數）、印表機型號、噴嘴數量、韌體版本、連線狀態、整合狀態（Spoolman、MQTT、HA）、非敏感設定、網路介面數量、Docker詳情、依賴版本。",dataNeverIncluded:"絕不包含：",dataNeverIncludedList:"印表機名稱、序列號、存取碼、密碼、IP 位址、信箱地址、API金鑰、權杖、Webhook URL、主機名稱或使用者名稱。",submit:"提交",startLogging:"開始偵錯日誌",stepEnableLogging:"偵錯日誌已啟用",stepReproduce:"請現在重現問題",stepStopLogging:"停止並提交報告",stopAndSubmit:"停止並提交",maxDuration:"{{minutes}} 分鐘後自動停止",stoppingLogs:"正在收集日誌並提交...",submitting:"正在提交錯誤報告...",submittingStepConnection:"正在執行印表機連線檢查",submittingStepVirtualPrinters:"正在執行虛擬印表機設定檢查",submittingStepLogScan:"正在掃描最近的日誌以尋找已知問題",submittingStepSubmit:"正在將報告提交至 GitHub",submitSuccess:"錯誤報告提交成功！",submitFailed:"提交錯誤報告失敗",diagnosticChecking:"正在檢查印表機連線...",diagnosticHealthy:"連線檢查通過 — 未在您的印表機上發現問題。",diagnosticSummary:"{{total}} 台印表機中有 {{problems}} 台存在連線問題",diagnosticIntro:"一台或多台印表機存在連線問題，可能正是您遇到問題的原因。請展開下方的印表機查看解決方法 — 解決它也許無需提交錯誤報告即可解決問題。您仍然可以在下方提交報告。",thankYou:"謝謝！",submitted:"您的錯誤報告已提交。",viewIssue:"檢視 Issue",unexpectedError:"發生了意外錯誤"},failureDetection:{title:"AI 故障檢測",description:"透過自託管的 Obico ML API 監控列印,並對偵測到的故障自動採取行動。",mlUrl:"Obico ML API 地址",mlUrlHint:"您自託管的 Obico ml_api 容器的基礎 URL(例如 http://192.168.1.10:3333)。",test:"測試",testSuccess:"ML API 可存取且正常。",testFailed:"無法存取 ML API。",sensitivity:"靈敏度",sensitivityLow:"低(減少誤報)",sensitivityMedium:"中(平衡)",sensitivityHigh:"高(更早檢測,更多誤報)",sensitivityHint:"調整觸發警告和故障的置信度閾值。",action:"偵測到故障時的操作",actionNotify:"僅通知",actionPause:"暫停列印",actionPauseOff:"暫停並切斷電源",pollInterval:"檢查間隔(秒)",pollIntervalHint:"列印過程中每臺印表機的檢查頻率。最小 5 秒,最大 120 秒。",externalUrlMissing:"尚未設定外部 URL。",externalUrlHint:"ML API 透過 URL 擷取攝影機快照。請在一般設定中設定外部 URL，讓 ML API 容器可以連線到 Bambuddy。",perPrinterTitle:"監控的印表機",perPrinterHint:"選擇檢測服務要監視哪些印表機。",monitorAll:"監控所有已連線的印表機",statusTitle:"狀態",serviceRunning:"服務執行中",thresholds:"低 / 高閾值",activePrinters:"活動列印",noActivePrints:"目前沒有正在進行的列印。",historyTitle:"最近檢測",noHistory:"尚無檢測紀錄。"},makerworld:{title:"MakerWorld",description:"貼上 MakerWorld 模型連結，即可直接在 Bambuddy 中匯入並列印 —— 無需切換至 Bambu Handy 應用程式。",pasteUrlHeader:"從 MakerWorld 匯入",pasteUrlPlaceholder:"https://makerworld.com/en/models/… 或貼上任意 MakerWorld 連結",resolveButton:"解析",signInRequiredTitle:"下載需要登入 Bambu Cloud",signInRequiredBody:"您可以匿名瀏覽模型詳情，但下載 3MF 檔案需要 Bambu Cloud 帳戶。",openCloudSettings:"開啟雲端設定",untitledModel:"無標題模型",byCreator:"作者: {{name}}",downloadsCount:"{{count}} 次下載",licensePrefix:"授權條款",alreadyImported:"已在資料庫中",openOnMakerworld:"在 MakerWorld 中開啟",alreadyInLibrary:"此模型已在您的資料庫中 —— 可在檔案管理員 → MakerWorld 中找到",importSuccess:"已匯入 {{filename}} —— 已儲存至檔案管理員 → MakerWorld",platesHeader:"列印板 ({{count}})",plateDefaultName:"列印板 {{n}}",materialCount:"{{count}} 種耗材",amsRequired:"需要 AMS",slicedFor:"為 {{printer}} 切片",alsoCompatible:"還標記為相容：{{printers}}",importToLibrary:"儲存",sliceIn:"儲存並在 {{slicer}} 中切片",disclaimer:"MakerWorld 整合使用由社群記錄的 API 介面。Bambuddy 與 MakerWorld 或 Bambu Lab 無從屬或認可關係。",lastImportSuccess:"已匯入您的資料庫",lastImportAlreadyInLibrary:"已存在於您的資料庫中",viewInLibrary:"在檔案管理員中查看",openInBambuStudio:"在 Bambu Studio 中開啟",openInOrcaSlicer:"在 OrcaSlicer 中開啟",importTo:"匯入至檔案管理員",recentImportsHeader:"最近匯入",phaseResolving:"解析中",phaseDownloading:"下載中",folderAuto:"MakerWorld (預設)",importAll:"全部匯入",importAllProgress:"正在匯入 {{current}}/{{total}}",openGallery:"開啟圖片庫",galleryPrev:"上一張",galleryNext:"下一張",deleteImport:"從資料庫中移除",importDeleting:"正在移除…",importDeleted:"已從資料庫中移除",confirmDelete:"從資料庫中移除 {{filename}}？本機檔案將被刪除，但可以從 MakerWorld 重新匯入。",errors:{resolveFailed:"無法解析該 MakerWorld 連結。",downloadFailed:"下載失敗。請重試。",deleteFailed:"無法從資料庫中移除檔案。"}},gcodeViewer:{back:"返回",backToArchives:"返回列印歸檔",backToFiles:"返回檔案管理器"},libraryTrash:{title:"資源回收筒",headerButton:"資源回收筒",headerTooltip:"檢視已移至資源回收筒的檔案",backToFiles:"返回檔案管理員",subtitleAdmin:"已刪除的檔案會在資源回收筒保留 {{days}} 天，之後自動刪除。此檢視顯示所有使用者的資源回收筒。",subtitleUser:"已刪除的檔案會在資源回收筒保留 {{days}} 天，之後自動刪除。",loading:"正在載入資源回收筒…",loadError:"無法載入資源回收筒。",empty:"資源回收筒是空的。",summary:"{{count}} 個檔案 · {{size}}",emptyTrash:"清空資源回收筒",restore:"還原",purgeNow:"立即刪除",autoPurgeIn:"將於 {{when}} 自動刪除",days:"天",retentionLabel:"自動刪除時間",selectAll:"全選",selectOne:"選擇 {{filename}}",selectionCount:"已選擇 {{count}} 項",bulkRestore:"還原所選",bulkPurge:"刪除所選",col:{filename:"檔案",folder:"資料夾",size:"大小",deleted:"移入資源回收筒",autoPurge:"自動刪除",owner:"擁有者",actions:"操作"},confirm:{purgeTitle:"永久刪除？",purgeBody:"{{filename}} 將從磁碟中刪除，無法還原。",emptyTitle:"清空資源回收筒？",emptyBody:"全部 {{count}} 個檔案將從磁碟中刪除。此操作無法復原。",bulkPurgeTitle:"永久刪除所選檔案？",bulkPurgeBody:"所選的 {{count}} 個檔案將從磁碟中刪除，無法還原。",cta:"永久刪除"},toast:{restored:"檔案已還原。",restoreFailed:"無法還原檔案。",purged:"檔案已永久刪除。",purgeFailed:"無法刪除檔案。",emptied:"已從資源回收筒刪除 {{count}} 個檔案。",emptyFailed:"無法清空資源回收筒。",retentionSaved:"自動刪除已設定為 {{days}} 天。",retentionFailed:"無法儲存保留設定。",bulkRestored:"已還原 {{count}} 個檔案。",bulkPurged:"已刪除 {{count}} 個檔案。"}},libraryPurge:{title:"清理舊檔案",headerButton:"清理舊檔案",headerTooltip:"批次將舊檔案移至資源回收筒",description:"早於所選時間的檔案將被移至資源回收筒。外部資料夾會被略過。在自動刪除之前，您可以從資源回收筒還原檔案。",ageLabel:"移動早於以下天數的檔案",days:"天",includeNeverPrinted:"包括從未列印過的檔案",effectsTitle:"點擊清除時會發生什麼",effect1:"符合的檔案移至回收筒 — 尚未從磁碟刪除。",effect2:"在保留期到期之前，您可以隨時從回收筒復原。",effect3:"保留期滿後，回收筒清理器將它們從磁碟永久刪除。",effect4:"外部（連結）資料夾中的檔案將被略過 — Bambuddy 從不刪除不屬於自己的位元組。",previewLoading:"正在檢查符合的檔案數量…",previewFailed:"無法預覽清理結果。",previewSummary:"{{count}} 個檔案 · {{size}} 將被移至資源回收筒",andMore:"…還有 {{count}} 個",warning:"檔案將被軟刪除——在保留期結束前，您可以從資源回收筒還原它們。",confirmCta:"將 {{count}} 個移至資源回收筒",purging:"正在移至資源回收筒…",toast:{success:"已將 {{count}} 個檔案移至資源回收筒。",failed:"無法清理檔案。"}},libraryAutoPurge:{enableLabel:"自動清理舊檔案",enableDescription:"每天執行一次管理員清理。檔案會先進入資源回收筒——不會立即刪除。",ageLabel:"自動清理早於以下天數的檔案",ageDescription:"最少 7 天，最多 10 年。使用與手動「清理舊檔案」按鈕相同的時間規則。",days:"天",includeNeverPrinted:"包括從未列印過的檔案",saveFailed:"無法儲存自動清理設定。"},archivePurge:{headerButton:"清除舊條目",headerTooltip:"批次刪除舊歸檔",title:"清除舊歸檔",description:"清除舊的列印歷史。每個歸檔按其最近一次列印完成時間老化 — 重新列印歸檔會重新整理其年齡，因此活躍工作永遠不會被清除。",ageLabel:"刪除最近未列印的歸檔：",days:"天",effectsTitle:"點擊清除時會發生什麼",effect1:"每個符合的歸檔將從清單中隱藏，其磁碟檔案（3MF、縮圖、縮時攝影、原始 3MF、F3D、照片）也會被刪除。",effect2:"資料庫中的歸檔記錄會保留，因此 Quick Stats 仍可計入耗材、時間、成本與能耗的貢獻 — 與單筆刪除的預設行為一致。",effect3:"勾選下方「同時從統計中移除」，可一併清除 Quick Stats 中的貢獻（等同單筆刪除選項）。此操作無法復原。",effect4:"重新列印歸檔會重新整理其使用計時器，因此仍在使用的歸檔不會被清除。",purgeStatsLabel:"同時從統計中移除",purgeStatsHint:"從 Quick Stats（耗材、時間、成本、能耗）中移除符合的歸檔。未勾選時，Quick Stats 會保留所有貢獻，僅檔案從磁碟刪除。",previewLoading:"檢查符合的歸檔數量…",previewFailed:"無法預覽清除。",previewSummary:"將移除 {{count}} 個歸檔 · {{size}}",andMore:"…還有 {{count}} 個",warning:"檔案會從磁碟刪除且無法復原。繼續前請下載或收藏您想保留的內容。",confirmCta:"移除 {{count}} 個歸檔",purging:"移除中…",toast:{success:"已移除 {{count}} 個歸檔。",failed:"無法清除歸檔。"}},archiveAutoPurge:{enableLabel:"自動清除舊歸檔",enableDescription:"每天一次，將閾值內未列印的歸檔從清單中隱藏，並從磁碟中刪除其檔案。重新列印會重設計時器。",ageLabel:"自動刪除最近未列印的歸檔：",ageDescription:"最少 7 天，最多 10 年。基於最近一次列印完成 — 重新列印會重新整理年齡。刪除 3MF、縮圖、縮時攝影、原始 3MF、F3D 與照片。",days:"天",purgeStatsLabel:"同時從統計中移除",purgeStatsDescription:"啟用後，每日清理任務還會將每個被清除的歸檔從 Quick Stats（耗材、時間、成本、能耗）中移除。預設關閉 — Quick Stats 會保留貢獻，僅檔案從磁碟刪除。",runNow:"立即清除歸檔",saveFailed:"無法儲存自動清除設定。"},cameraTokens:{title:"攝影機 API 權杖",navTitle:"攝影機 API 權杖",description:"長期權杖，用於將攝影機串流嵌入 Home Assistant、Frigate、資訊站或其他需要穩定 URL 的工具。每個權杖僅限攝影機串流，可隨時撤銷。",loading:"載入中…",confirmRevoke:{title:"撤銷此權杖？",body:"使用「{{name}}」的任何裝置將立即失去存取權限。此操作無法復原。",cancel:"取消",confirm:"撤銷"},create:{title:"建立新權杖",nameLabel:"權杖名稱",namePlaceholder:"例如 Home Assistant",daysLabel:"到期天數",submit:"建立",hint:"最大有效期 365 天。權杖值僅在建立時顯示一次 — 請立即複製。"},created:{title:"權杖已建立 — 立即複製",warning:"這是此權杖唯一一次可見。關閉此對話框後您將無法再次查看。",copy:"複製",dismiss:"我已儲存"},list:{myTitle:"我的權杖",allTitle:"所有使用者（管理員視圖）",empty:"尚無權杖。",name:"名稱",owner:"擁有者",prefix:"前綴",created:"建立時間",expires:"到期時間",lastUsed:"最近使用",revoke:"撤銷",expired:"已過期"},toast:{created:"權杖已建立",createFailed:"建立權杖失敗",revoked:"權杖已撤銷",revokeFailed:"撤銷權杖失敗",loadFailed:"載入權杖失敗",copied:"已複製到剪貼簿",copyFailed:"複製失敗 — 手動選擇並複製"}},forecast:{title:"庫存預測",noSpools:"未找到活躍的料卷。請將料卷新增至庫存以查看預測資料。",noUsageData:"無可用使用資料 — 無法預測庫存時間線。",sku:"SKU",material:"材料",stock:"庫存",dailyRate:"消耗率",daysLeft:"剩餘天數",emptyBy:"耗盡日期",reorderBy:"補貨截止日",actions:"操作",trend:"趨勢",estimated:"估算",noData:"無資料",timeframe:"時間範圍",chartTitle:"庫存預測 — 前5種材料",dashedLinesROP:"虛線 = 再訂貨點",stockLevel:"庫存量",reorderPoint:"再訂購點",safetyMargin:"安全餘量",trendLegend:"趨勢（基於歷史，95%服務水準）",estimatedLegend:"估算（重量差值）",noDataLegend:"無資料",ropLabel:"再訂貨點",ssLabel:"安全庫存",safetyStockLegend:"安全庫存",stockArrivalLegend:"到貨",stockoutLegend:"斷貨",alertCount_one:"{{count}}條警告",alertCount_other:"{{count}}條警告",order:"訂購",globalLeadTime:"全域交貨期",globalLeadTimeHint:"全域交貨期下限 — 用於所有 SKU 的再訂購點計算",save:"儲存",cancel:"取消",settingsSaved:"設定已儲存",failedSaveSettings:"儲存設定失敗",globalLeadTimeSaved:"全域提前期已儲存",skuLeadTimeOverride:"SKU 交貨期覆蓋",skuLeadTimeHint:"0 = 使用全域交貨期。設定 >0 以覆蓋此 SKU。",safetyMarginLabel:"安全餘量",effectiveLeadTime:"有效交貨期",effectiveLeadTimeHint:"max(全域 {{global}}天, SKU {{sku}}天)",reorderPointHint:"d̄ × LT + safety margin — 當庫存降至此水準時下單",safetyMarginHint:"統計安全庫存 (z=1.65 × σ × √LT) + 使用者自訂緩衝",safetyMarginHintDays:"在統計安全庫存基礎上額外增加的緩衝。{{approx}}",safetyMarginHintDaysApprox:" ≈ 按當前速率 {{g}}g。",safetyMarginHintG:"在統計安全庫存基礎上增加的固定重量緩衝。{{approx}}",safetyMarginHintGApprox:" ≈ 按當前速率 {{days}}天。",individualSpools:"單個料卷",labelWeight:"標示重量",spoolCount_one:"{{count}}個線軸",spoolCount_other:"{{count}}個線軸",stockBreakRisk:"斷貨風險",stockBreakBefore:"補貨前庫存斷檔",stockBreakDetail:"剩餘 {{days}} 天，交貨期 {{lt}} 天。",reorderNow:"立即補貨",reorderTriggerPassed:"觸發日期 {{date}} 已過。",shoppingList:"購物清單",shoppingListItems_one:"（{{count}}項）",shoppingListItems_other:"（{{count}}項）",shoppingListEmpty:"購物清單為空。點擊任意列的購物車圖示以新增商品。",addToCart:"新增至購物清單",alertsSnoozed:"靜音此SKU的提醒",alertsEnabled:"啟用此SKU的提醒",addedToCart:"已新增至購物清單",failedAddItem:"新增項目失敗",listView:"列表",logisticsView:"物流",qty:"數量",weight:"重量",leadTime:"交貨期",expectedRestock:"預計補貨日期",status:"狀態",note:"備註",pending:"待處理",purchased:"已購買",received:"已收貨",markPurchased:"標記為已購買",markReceived:"標記為已收貨 — 將料卷新增至庫存",resetToPending:"重置為待處理",remove:"移除",clearAll:"清空",downloadCsv:"CSV",addToCartTitle:"新增至購物清單",byQuantity:"依數量",byDuration:"依時長",numberOfSpools:"線軸數量",lastHowManyDays:"需要持續多少天？",noUsageQty:"無使用資料 — 數量已設為1。",noteOptional:"備註（選填）",notePlaceholder:"例如：用於專案X，緊急…",addNSpools_one:"新增{{count}}個線軸",addNSpools_other:"新增{{count}}個線軸",onArrival:"到貨時",stockBreakIn:"{{days}} 天後斷貨。",stockRunsOutBefore:"庫存在 {{lt}} 天交貨期結束前耗盡。",atRate:"按 {{rate}}g/天的速度，您需要",moreSpools_one:"再{{count}}個線軸",moreSpools_other:"再{{count}}個線軸",bridgeGap:"來彌補缺口。",noReadAccess:"您沒有查看庫存預測的權限。",noWriteAccess:"您沒有修改預測設定的權限。"}},Tpe={nav:{printers:"Yazıcılar",archives:"Arşivler",queue:"Baskı Kuyruğu",stats:"İstatistikler",profiles:"Profiller",maintenance:"Bakım",projects:"Projeler",inventory:"Filament",files:"Dosya Yöneticisi",makerworld:"MakerWorld",notifications:"Bildirimler",settings:"Ayarlar",system:"Sistem",collapseSidebar:"Kenar çubuğunu daralt",expandSidebar:"Kenar çubuğunu genişlet",update:"Güncelle",updateAvailable:"Güncelleme mevcut: v{{version}}",updateAvailableBanner:"{{version}} sürümü kullanılabilir!",viewUpdate:"Güncellemeyi gör",viewOnGithub:"GitHub'da gör",keyboardShortcuts:"Klavye kısayolları (?)",switchToLight:"Açık moda geç",switchToDark:"Koyu moda geç",switchToSystem:"Sistem moduna geç",smartSwitches:"Akıllı Anahtarlar",logout:"Çıkış",installApp:"Uygulamayı yükle",installAppSuccess:"Bambuddy yüklendi"},common:{save:"Kaydet",saving:"Kaydediliyor...",cancel:"İptal",delete:"Sil",edit:"Düzenle",add:"Ekle",close:"Kapat",confirm:"Onayla",loading:"Yükleniyor...",error:"Hata",errorLoading:"Veri yüklenirken hata",retry:"Yeniden dene",success:"Başarılı",warning:"Uyarı",enabled:"Etkin",disabled:"Devre dışı",yes:"Evet",no:"Hayır",on:"Açık",off:"Kapalı",all:"Tümü",none:"Hiçbiri",search:"Ara",filter:"Filtrele",sort:"Sırala",refresh:"Yenile",download:"İndir",upload:"Yükle",uploading:"Yükleniyor...",uploadFailed:"Yükleme başarısız",actions:"İşlemler",status:"Durum",name:"Ad",description:"Açıklama",date:"Tarih",time:"Saat",hours:"saat",minutes:"dakika",seconds:"saniye",days:"gün",enable:"Etkinleştir",disable:"Devre dışı bırak",permissions:"İzinler",noPrinters:"Yapılandırılmış yazıcı yok",noData:"Veri yok",linkNotFound:"Bağlantı bulunamadı",required:"Zorunlu",optional:"İsteğe bağlı",dismiss:"Kapat",apply:"Uygula",reset:"Sıfırla",export:"Dışa aktar",import:"İçe aktar",clear:"Temizle",selectAll:"Tümünü Seç",deselectAll:"Seçimi Kaldır",noChange:"— Değişiklik yok —",unchanged:"Değişmedi",unassigned:"Atanmamış",unknown:"Bilinmiyor",unknownError:"Bilinmeyen hata",today:"Bugün",tomorrow:"Yarın",asap:"En kısa sürede",overdue:"Gecikmiş",now:"Şimdi",collapse:"Daralt",expand:"Genişlet",viewArchive:"Arşivi gör",viewInFileManager:"Dosya Yöneticisinde gör",addedBy:"{{username}} tarafından eklendi",prints:"baskı",more:"+{{count}} daha",ascending:"Artan",descending:"Azalan",back:"Geri",copy:"Kopyala",copied:"Kopyalandı!",printer:"Yazıcı",remove:"Kaldır",type:"Tür",print:"Baskı",rename:"Yeniden adlandır",move:"Taşı",create:"Oluştur",duplicate:"Çoğalt",left:"Sol",right:"Sağ"},printers:{title:"Yazıcılar",addPrinter:"Yazıcı Ekle",addPreflight:{checking:"Bağlantı kontrol ediliyor...",warning:"Bazı bağlantı kontrolleri başarısız oldu. Bu yazıcı çevrimdışı olarak görünebilir. Aşağıdaki kontrolleri inceleyin, düzeltebileceklerinizi düzeltin veya yine de kaydedin.",back:"Geri",saveAnyway:"Yine de kaydet"},editPrinter:"Yazıcıyı Düzenle",deletePrinter:"Yazıcıyı Sil",printerName:"Yazıcı Adı",serialNumber:"Seri Numarası",ipAddress:"IP Adresi / Ana Bilgisayar Adı",accessCode:"Erişim Kodu",model:"Model",nozzleCount:"Nozul Sayısı",autoArchive:"Otomatik Arşivle",status:{available:"Müsait",idle:"Boşta",printing:"Baskıda",paused:"Duraklatıldı",offline:"Çevrimdışı",problem:"Sorun",error:"Hata",finished:"Tamamlandı",unknown:"Bilinmiyor"},temperatures:{nozzle:"Nozul",bed:"Tabla",chamber:"Hazne"},progress:"%{{percent}} tamamlandı",timeRemaining:"{{time}} kaldı",deleteConfirm:'"{{name}}" silmek istediğinizden emin misiniz?',maintenanceOk:"Bakım Tamam",maintenanceWarning:"{{count}} uyarı",maintenanceWarning_plural:"{{count}} uyarı",maintenanceDue:"{{count}} bekliyor",maintenanceDue_plural:"{{count}} bekliyor",sort:{name:"Ad",status:"Durum",model:"Model",location:"Konum",ascending:"Artan sırala",descending:"Azalan sırala"},cardSize:{small:"Küçük kartlar",medium:"Orta kartlar",large:"Büyük kartlar",extraLarge:"Çok büyük kartlar"},hideOffline:"Çevrimdışı olanları gizle",nextAvailable:"Sıradaki müsait",powerOn:"Aç",offlinePrintersWithPlugs:"Akıllı prizli çevrimdışı yazıcılar",noPrintersConfigured:"Henüz yapılandırılmış yazıcı yok",search:"Yazıcı ara...",noSearchResults:"Aramanıza veya filtrelerinize uyan yazıcı yok",filter:{allStatuses:"Tüm durumlar",allLocations:"Tüm konumlar"},toolbar:{filters:"Filtreler",view:"Görünüm",actions:"İşlemler"},readyToPrint:"Baskıya hazır",external:"Harici",extL:"Ext-L",extR:"Ext-R",deleteArchives:"Baskı arşivlerini sil",noLabel:"Etiket yok",printPreview:"Baskı önizleme",width:"Genişlik",height:"Yükseklik",noObjectsFound:"Nesne bulunamadı",objectsLoadedOnPrintStart:"Nesneler baskı başladığında yüklenir",willBeSkipped:"Atlanacak",name:"Ad",serialCannotBeChanged:"Seri numarası değiştirilemez",locationHelp:"Yazıcıları gruplamak ve kuyruk işlerini filtrelemek için kullanılır",wifiSignal:{veryWeak:"Çok zayıf",weak:"Zayıf",fair:"Orta",good:"İyi",excellent:"Mükemmel"},maintenanceUpToDate:"Tüm bakım güncel - Görüntülemek için tıklayın",chamberLightOn:"Hazne ışığını aç",chamberLightOff:"Hazne ışığını kapat",files:"Dosyalar",browseFiles:"Yazıcı dosyalarına göz at",autoOffAfterPrint:"Baskı sonrası otomatik kapat",autoOffExecuted:"Otomatik kapama uygulandı - sıfırlamak için yazıcıyı açın",hmsErrors:"HMS Hataları",viewHmsErrors:"{{count}} HMS hatasını gör",resume:"Devam Et",pause:"Duraklat",stop:"Durdur",camera:"Kamera",skipObject:"Nesneyi Atla",reconnect:"Yeniden Bağlan",forceRefresh:"Zorla Yenile",forceRefreshSuccess:"Yenileme istendi",mqttDebug:"MQTT Hata Ayıklama",printerInformation:"Yazıcı Bilgisi",copyToClipboard:"Kopyala",copied:"Kopyalandı!",state:"Durum",wifiSignalLabel:"WiFi Sinyali",developerMode:"Geliştirici Modu",enabled:"Etkin",disabled:"Devre dışı",addedOn:"Eklendi",sdCard:"SD Kart",inserted:"Takılı",notInserted:"Takılı değil",totalPrintHours:"Baskı Saatleri",activeNozzle:"Aktif: {{nozzle}} nozul",nozzleRack:"Nozul Rafı",nozzleDocked:"Yuvalanmış",nozzleMounted:"Takılı",nozzleActive:"Aktif",nozzleIdle:"Boşta",nozzleDiameter:"Çap",nozzleType:"Tür",nozzleStatus:"Durum",nozzleFilament:"Filament",nozzleWear:"Aşınma",nozzleMaxTemp:"Maks. Sıcaklık",nozzleSerial:"Seri",nozzleHardenedSteel:"Sertleştirilmiş Çelik",nozzleStainlessSteel:"Paslanmaz Çelik",nozzleTungstenCarbide:"Tungsten Karbür",nozzleFlow:"Akış",nozzleHighFlow:"Yüksek Akış",nozzleStandardFlow:"Standart",firmwareUpdate:"Firmware Güncellemesi",firmwareInstructions:"Yazıcının dokunmatik ekranında şuraya gidin:",firmwareNav:"Şuraya gidin",settings:"Ayarlar",firmware:"Firmware",discoverPrinters:"Yazıcıları Keşfet",searching:"Aranıyor...",manualEntry:"Manuel Giriş",addFromCloud:"Bulut'tan Ekle",toast:{printerDeleted:"Yazıcı silindi",missingSpoolAssignment:"{{printer}} üzerinde baskı başladı. Şunlar için eksik makara ataması: {{slots}}",printerAdded:"Yazıcı eklendi",printerUpdated:"Yazıcı güncellendi",failedToDelete:"Yazıcı silinemedi",failedToAdd:"Yazıcı eklenemedi",connectionFailedNotAdded:"Yazıcıya bağlanılamadı. IP, seri numarası ve erişim kodunu doğrulayın ve yalnızca LAN modunun açık olduğunu onaylayın. Yazıcı eklenmedi.",failedToUpdate:"Yazıcı güncellenemedi",commandSent:"Komut gönderildi",failedToSendCommand:"Komut gönderilemedi",turnedOn:"{{name}} açıldı",failedToPowerOn:"{{name}} açılamadı",scriptTriggered:"Betik tetiklendi",printStopped:"Baskı durduruldu",printPaused:"Baskı duraklatıldı",printResumed:"Baskıya devam edildi",referenceDeleted:"Referans silindi",detectionAreaSaved:"Algılama alanı kaydedildi",failedToRunScript:"Betik çalıştırılamadı",failedToStopPrint:"Baskı durdurulamadı",failedToPausePrint:"Baskı duraklatılamadı",failedToResumePrint:"Baskıya devam edilemedi",failedToControlChamberLight:"Hazne ışığı kontrol edilemedi",failedToSetSpeed:"Baskı hızı ayarlanamadı",failedToUpdateSetting:"Ayar güncellenemedi",failedToSkipObjects:"Nesneler atlanamadı",failedToRereadRfid:"RFID yeniden okunamadı",failedToCheckPlate:"Plaka kontrol edilemedi",failedToUpdateLabel:"Etiket güncellenemedi",failedToDeleteReference:"Referans silinemedi",failedToSaveDetectionArea:"Algılama alanı kaydedilemedi",plateCheckEnabled:"Plaka kontrolü etkinleştirildi",plateCheckDisabled:"Plaka kontrolü devre dışı bırakıldı",calibrationSaved:"Kalibrasyon kaydedildi!",calibrationFailed:"Kalibrasyon başarısız",rfidRereadInitiated:"RFID yeniden okuma başlatıldı",loadInitiated:"Filament yükleniyor…",unloadInitiated:"Filament çıkarılıyor…",failedToLoad:"Filament yüklenemedi",failedToUnload:"Filament çıkarılamadı"},connection:{connected:"Bağlı",offline:"Çevrimdışı"},plateStatus:{markCleared:"Plakayı temizlendi olarak işaretle",cleared:"Plaka Temiz",notCleared:"Plaka Temiz Değil",inUse:"Plaka Kullanımda"},queue:{inQueue:"Kuyrukta {{count}} baskı",inQueue_plural:"Kuyrukta {{count}} baskı"},controls:"Kontroller",rfid:{reread:"RFID'yi yeniden oku"},ams:{load:"Yükle",unload:"Çıkar"},bedJog:{title:"Baskı plakasını hareket ettir",bed:"Tabla",step:"Adım (mm)",up:"Plakayı yukarı hareket ettir",down:"Plakayı aşağı hareket ettir",disabledWhilePrinting:"Baskı sırasında devre dışı",notHomedTitle:"Yazıcı sıfırlanmamış",notHomedMessage:"Yazıcı son baskıdan bu yana sıfırlanmadı. Güvenli konumlandırma için önce otomatik sıfırlamayı çalıştırın (kafayı park eder, ardından X, Y ve Z sıfırlanır) veya yine de hareket ettirin — yazılım son durakları atlanır.",homeZ:"Otomatik Sıfırla",moveAnyway:"Yine de hareket ettir",homingStarted:"Yazıcı otomatik sıfırlanıyor…"},permission:{noAdd:"Yazıcı eklemek için izniniz yok",noEdit:"Yazıcıları düzenlemek için izniniz yok",noDelete:"Yazıcıları silmek için izniniz yok",noControl:"Yazıcıları kontrol etmek için izniniz yok",noFiles:"Yazıcı dosyalarına erişim izniniz yok",noAmsRfid:"AMS RFID'yi yeniden okumak için izniniz yok",noSmartPlugControl:"Akıllı prizleri kontrol etme izniniz yok",noCamera:"Kameraları görüntüleme izniniz yok"},modal:{addTitle:"Yazıcı Ekle",editTitle:"Yazıcıyı Düzenle",myPrinter:"Yazıcım",selectModel:"Model seç...",locationGroup:"Konum / Grup (isteğe bağlı)",locationPlaceholder:"örn., Atölye, Ofis, Bodrum",autoArchiveLabel:"Tamamlanan baskıları otomatik arşivle",fromPrinterSettings:"Yazıcı ayarlarından",modelOptional:"Model (isteğe bağlı)",saveChanges:"Değişiklikleri Kaydet"},skipObjects:{tooltip:"Nesneleri atla",onlyWhilePrinting:"Nesneleri atla (yalnızca baskı sırasında)",requiresMultiple:"Nesneleri atla (2+ nesne gerektirir)",title:"Nesneleri Atla",matchIdsInfo:"ID'leri yazıcı ekranınızla eşleştirin",printerShowsIds:"Yazıcı ekranı baskı plakasındaki nesne ID'lerini gösterir",skipSelected:"Seçilenleri Atla",skipping:"Atlanıyor...",noObjectsSelected:"Hiçbir nesne seçilmedi",selectObjectsToSkip:"Mevcut baskıdan atlamak istediğiniz nesneleri seçin",skipped:"atlandı",objectsSkipped:"Nesneler atlandı",activeCount:"{{count}} aktif",waitForLayer:"Nesneleri atlamak için 2+ katmanı bekleyin (şu an katman {{layer}})",skip:"Atla",confirmTitle:"Nesne Atlansın mı?",confirmMessage:'"{{name}}" atlamak istediğinizden emin misiniz? Bu geri alınamaz.'},confirm:{deleteTitle:"Yazıcıyı Sil",deleteMessage:'"{{name}}" silmek istediğinizden emin misiniz? Bu, tüm bağlantı ayarlarını kaldıracak.',deleteArchivesNote:"Bu yazıcı için tüm baskı geçmişi kalıcı olarak silinecek.",keepArchivesNote:"Baskı geçmişi saklanacak ancak artık bu yazıcıyla ilişkilendirilmeyecek.",stopTitle:"Baskıyı Durdur",stopMessage:'"{{name}}" üzerindeki mevcut baskıyı durdurmak istediğinizden emin misiniz? Bu, baskı işini iptal edecek.',stopButton:"Baskıyı Durdur",pauseTitle:"Baskıyı Duraklat",pauseMessage:'"{{name}}" üzerindeki mevcut baskıyı duraklatmak istediğinizden emin misiniz?',pauseButton:"Baskıyı Duraklat",resumeTitle:"Baskıya Devam Et",resumeMessage:'"{{name}}" üzerindeki baskıya devam etmek istediğinizden emin misiniz?',resumeButton:"Baskıya Devam Et",powerOnTitle:"Yazıcıyı Aç",powerOnMessage:'"{{name}}" için gücü AÇMAK istediğinizden emin misiniz?',powerOnButton:"Aç",powerOffTitle:"Yazıcıyı Kapat",powerOffMessage:'"{{name}}" için gücü KAPATMAK istediğinizden emin misiniz?',powerOffWarning:'UYARI: "{{name}}" şu anda baskı yapıyor! Gücü KAPATMAK istediğinizden emin misiniz? Bu, baskıyı kesintiye uğratacak ve yazıcıya zarar verebilir.',powerOffButton:"Kapat",haToggleTitle:'"{{name}}" Aç/Kapat',haToggleMessage:"Home Assistant varlığı {{entity}} açılıp kapatılsın mı? Şu anda açıksa güç kesilebilir.",haToggleWarning:'UYARI: "{{name}}" şu anda baskı yapıyor! {{entity}} açılıp kapatılması gücü kesip baskıyı kesintiye uğratabilir. Devam edilsin mi?',haToggleButton:"Aç/Kapat"},bulk:{select:"Seç",selectAll:"Tümünü Seç",selectByLocation:"Konuma Göre Seç",selected:"{{count}} seçildi",actions:{stop:"Durdur",pause:"Duraklat",resume:"Devam Et",clearPlate:"Tablayı Temizle",clearHMS:"Bildirimleri Temizle"},confirm:{stopTitle:"{{count}} Baskıyı Durdur",stopMessage:"Bu, {{count}} yazıcı üzerindeki aktif baskıları iptal edecek. Bu işlem geri alınamaz.",stopButton:"Hepsini Durdur",pauseTitle:"{{count}} Baskıyı Duraklat",pauseMessage:"Bu, {{count}} yazıcı üzerindeki aktif baskıları duraklatacak.",pauseButton:"Hepsini Duraklat",clearPlateTitle:"{{count}} Baskı Tablasını Temizle",clearPlateMessage:"Bu, {{count}} yazıcının baskı tablasını temizleyecek ve kuyruktaki işleri tetikleyebilir.",clearPlateButton:"Hepsini Temizle"},success:"{{count}} yazıcı üzerinde {{action}} tamamlandı",partial:"{{succeeded}} başarılı, {{failed}} başarısız",noneApplicable:"Seçilen yazıcılar bu işlem için doğru durumda değil",selectByState:"Duruma Göre Seç"},discovery:{title:"Yazıcıları Keşfet",searching:"Aranıyor...",scanning:"Taranıyor...",scanProgress:"Taranıyor... {{scanned}}/{{total}}",foundPrinters:"{{count}} yazıcı bulundu",noPrintersFound:"Yazıcı bulunamadı",noPrintersFoundSubnet:"Belirtilen alt ağda yazıcı bulunamadı.",noPrintersFoundNetwork:"Ağda yazıcı bulunamadı.",allConfigured:"Keşfedilen tüm yazıcılar zaten yapılandırılmış.",alreadyAdded:"Zaten eklendi",select:"Seç",manualEntry:"Manuel Giriş",addFromCloud:"Bulut'tan Ekle",subnetToScan:"Taranacak alt ağ",dockerNote:"Docker algılandı. Yazıcınızın alt ağını CIDR gösteriminde girin. docker-compose.yml'de network_mode: host gerektirir.",scanSubnet:"Yazıcılar için Alt Ağı Tara",discoverNetwork:"Ağda Yazıcıları Keşfet",scanningSubnet:"Bambu yazıcıları için alt ağ taranıyor...",scanningNetwork:"Ağ taranıyor...",serialRequired:"Seri numarası gerekli",unknown:"Bilinmiyor",failedToStart:"Keşif başlatılamadı",customSubnetOption:"Özel alt ağ...",customSubnetLabel:"Özel alt ağ (CIDR)",customSubnetNote:"Yazıcınız bu sunucudan farklı bir ağda ise özel bir alt ağ kullanın. FTP (990) ve MQTT (8883) bağlantı noktaları yönlendirme sınırı boyunca erişilebilir olmalıdır."},drying:{start:"Kurutmayı Başlat",stop:"Kurutmayı Durdur",temperature:"Sıcaklık",duration:"Süre",hours:"saat",timeRemaining:"{{time}} kaldı",active:"Kurutuluyor",notSupported:"Kurutma desteklenmiyor",powerRequired:"Kurutmayı etkinleştirmek için AMS güç adaptörünü bağlayın",startingDrying:"Kurutma başlatılıyor...",stoppingDrying:"Kurutma durduruluyor...",rotateTray:"Kurutma sırasında makarayı döndür"},filaments:"Filamentler",openCameraOverlay:"Kamera bindirmesini aç",openCameraWindow:"Kamerayı yeni pencerede aç",firmwareUpdateAvailable:"Firmware güncellemesi mevcut: {{current}} → {{latest}}",firmwareUpToDate:"Firmware {{version}} — Güncel",firmwareUpdateButton:"Güncelle",plateDetection:{noPermission:"Yazıcıları güncellemek için izniniz yok",enabledClick:"Plaka kontrolü etkin - Devre dışı bırakmak için tıklayın",disabledClick:"Plaka kontrolü devre dışı - Etkinleştirmek için tıklayın",manageCalibration:"Plaka algılama kalibrasyonunu yönet",calibrationRequired:"Kalibrasyon Gerekli",calibrationInstructions:"Lütfen baskı plakasının <strong>tamamen boş</strong> olduğundan emin olun, ardından Kalibre Et'e tıklayın.",calibrationDescription:"Kalibrasyon, boş plakanın referans görüntüsünü yakalar. Gelecekteki kontroller, nesneleri algılamak için bu referansa karşı karşılaştırılır.",calibrationTip:"<strong>İpucu:</strong> Farklı plakalar için 5 kalibrasyona kadar saklayabilirsiniz. Sistem, kontrol sırasında en iyi eşleşmeyi otomatik olarak kullanır.",plateEmpty:"Plaka boş görünüyor",objectsDetected:"Plakada nesneler algılandı",confidence:"Güven",difference:"Fark",analysisPreview:"Analiz önizlemesi:",analysisLegend:"Yeşil kutu = algılama alanı, Kırmızı kaplama = kalibrasyondan farklar",savedReferences:"Kaydedilen Referanslar ({{count}}/{{max}})",deleteReference:"Referansı sil",labelPlaceholder:"Etiket...",clickToEdit:"{{label}} - Düzenlemek için tıklayın",clickToAddLabel:"Etiket eklemek için tıklayın"},speed:{title:"Baskı Hızı",silent:"Sessiz (%50)",standard:"Standart (%100)",sport:"Spor (%124)",ludicrous:"Çılgın (%166)"},airduct:{title:"Hava Kanalı Modu",cooling:"Soğutma",heating:"Isıtma"},noSdCard:"SD Yok",door:{open:"Açık",closed:"Kapalı"},fans:{partCooling:"Parça Soğutma Fanı",auxiliary:"Yardımcı Fan",chamber:"Hazne Fanı"},clickToViewHmsErrors:"HMS hatalarını görüntülemek için tıklayın",estimatedCompletion:"Tahmini tamamlanma süresi",plateNumber:"Plaka {{number}}",slotOptions:"Yuva seçenekleri",amsPopup:{friendlyName:"AMS Adı",friendlyNamePlaceholder:"örn. AMS Kolay Adı",serialNumber:"Seri Numarası",firmwareVersion:"Firmware",save:"Kaydet",clear:"Temizle",noEditPermission:"AMS birimlerini yeniden adlandırma izniniz yok"},firmwareModal:{title:"Firmware Güncellemesi",titleUpToDate:"Firmware Bilgisi",currentVersion:"Mevcut:",latestVersion:"En son:",releaseNotes:"Sürüm Notları",checkingPrereqs:"Önkoşullar kontrol ediliyor...",sdCardReady:"SD kart hazır. Firmware yüklemek için aşağıya tıklayın.",uploadedSuccess:"Firmware SD karta yüklendi!",applyInstructions:"Güncellemeyi yazıcınıza uygulamak için:",step1:"Yazıcının dokunmatik ekranında <strong>Ayarlar</strong>'a gidin",step2:"<strong>Firmware</strong>'e gidin",step3:"<strong>SD karttan güncelle</strong>'yi seçin",step4:"Güncelleme 10-20 dakika sürer",done:"Tamam",starting:"Başlatılıyor...",uploadFirmware:"Firmware Yükle",uploadFailed:"Yükleme başlatılamadı: {{error}}",uploadedToast:"Firmware yüklendi! Güncellemeyi yazıcı ekranından tetikleyin.",availableVersions:"Kullanılabilir sürümler",usable:"Kullanılabilir",unavailable:"Kullanılamaz",installed:"Yüklü",newerBadge:"daha yeni",olderBadge:"daha eski",currentBadge:"mevcut"},accessCodePlaceholder:"Mevcut olanı korumak için boş bırakın",roi:{title:"Algılama Alanı (ROI)",xStart:"X Başlangıç",yStart:"Y Başlangıç",width:"Genişlik",height:"Yükseklik",instruction:"Baskı plakasına odaklanmak için algılama alanını ayarlayın. Önizlemedeki yeşil kutu mevcut alanı gösterir."},developerModeWarning:"Geliştirici LAN modu şunlarda etkin değil: {{names}}. Bazı özellikler çalışmayabilir.",howToEnable:"Nasıl etkinleştirilir",incompatibleFile:"Bu dosya {{slicedFor}} için dilimlendi, ancak bu yazıcı bir {{printerModel}}",dropNotPrintable:"Yalnızca .gcode ve .gcode.3mf dosyaları yazdırılabilir",dropToPrint:"Yazdırmak için bırakın",cannotPrint:"Yazıcı meşgul"},archives:{title:"Baskı Arşivleri",searchPlaceholder:"Arşivlerde ara...",filterByPrinter:"Yazıcıya göre filtrele",filterByStatus:"Duruma göre filtrele",sortBy:"Sıralama",sortNewest:"Önce en yeni",sortOldest:"Önce en eski",sortName:"Ad",sortDuration:"Süre",sortLargest:"Önce en büyük",sortSmallest:"Önce en küçük",sortSize:"Boyut",noArchives:"Arşiv bulunamadı",noArchivesSearch:"Aramanızla eşleşen arşiv yok",originalPrintNotVisible:"Orijinal baskı görünmüyor - filtreleri temizlemeyi deneyin",noArchivesYet:"Henüz arşiv yok",prints:"baskı",pagination:{showing:"Gösterilen",to:"-",of:"/",show:"Göster",page:"Sayfa",all:"Tümü"},loadingArchives:"Arşivler yükleniyor...",releaseToUpload:"Yüklemek için bırakın",showAll:"Tümünü göster",showFavoritesOnly:"Yalnızca favorileri göster",gridView:"Izgara görünümü",listView:"Liste görünümü",calendarView:"Takvim görünümü",logView:"Baskı Günlüğü",manageTags:"Etiketleri Yönet",showFailedPrints:"Başarısız baskıları göster",hideFailedPrints:"Başarısız baskıları gizle",hideDuplicates:"Tekrarları Gizle",viewOriginalPrint:"Orijinal baskıyı görüntülemek için tıklayın (#{{id}})",printTime:"Baskı Süresi",filamentUsed:"Kullanılan Filament",cost:"Maliyet",reprint:"Tekrar Yazdır",preview:"Önizleme",deleteArchive:"Arşivi Sil",deleteConfirm:"Bu arşivi silmek istediğinizden emin misiniz?",favorite:"Favori",unfavorite:"Favorilerden kaldır",viewDetails:"Detayları Görüntüle",status:{completed:"Tamamlandı",failed:"Başarısız",stopped:"Durduruldu"},toast:{source3mfAttached:"Kaynak 3MF eklendi: {{filename}}",failedUploadSource3mf:"Kaynak 3MF yüklenemedi",source3mfRemoved:"Kaynak 3MF kaldırıldı",failedRemoveSource3mf:"Kaynak 3MF kaldırılamadı",f3dAttached:"F3D eklendi: {{filename}}",failedUploadF3d:"F3D yüklenemedi",f3dRemoved:"F3D kaldırıldı",failedRemoveF3d:"F3D kaldırılamadı",timelapseAttached:"Zaman atlamalı video eklendi: {{filename}}",timelapseAlreadyAttached:"Zaman atlamalı video zaten eklendi",noMatchingTimelapse:"Eşleşen zaman atlamalı video bulunamadı",failedScanTimelapse:"Zaman atlamalı video taranamadı",failedAttachTimelapse:"Zaman atlamalı video eklenemedi",timelapseRemoved:"Zaman atlamalı video kaldırıldı",failedRemoveTimelapse:"Zaman atlamalı video kaldırılamadı",timelapseUploaded:"Zaman atlamalı video yüklendi: {{filename}}",failedUploadTimelapse:"Zaman atlamalı video yüklenemedi",archiveDeleted:"Arşiv silindi",failedDeleteArchive:"Arşiv silinemedi",addedToFavorites:"Favorilere eklendi",removedFromFavorites:"Favorilerden kaldırıldı",projectUpdated:"Proje güncellendi",failedUpdateProject:"Proje güncellenemedi",linkCopied:"Bağlantı panoya kopyalandı",failedCopyLink:"Bağlantı kopyalanamadı",photoDeleted:"Fotoğraf silindi",failedDeletePhoto:"Fotoğraf silinemedi",failedDeleteArchives:"Arşivler silinemedi",failedUpdateFavorites:"Favoriler güncellenemedi",exportDownloaded:"Dışa aktarma indirildi",exportFailed:"Dışa aktarma başarısız"},menu:{print:"Yazdır",schedule:"Zamanla",openInBambuStudio:"Dilimleyicide Aç",slice:"Dilimle",externalLink:"Harici Bağlantı",viewOnMakerWorld:"MakerWorld'de Görüntüle",preview3d:"3B Önizleme",viewTimelapse:"Zaman Atlamalı Videoyu Görüntüle",scanForTimelapse:"Zaman Atlamalı Video Tara",uploadTimelapse:"Zaman Atlamalı Video Yükle",removeTimelapse:"Zaman Atlamalı Videoyu Kaldır",downloadSource3mf:"Kaynak 3MF İndir",uploadSource3mf:"Kaynak 3MF Yükle",replaceSource3mf:"Kaynak 3MF Değiştir",removeSource3mf:"Kaynak 3MF Kaldır",uploadF3d:"F3D Yükle",replaceF3d:"F3D Değiştir",downloadF3d:"F3D İndir",removeF3d:"F3D Kaldır",download:"İndir",copyDownloadLink:"İndirme Bağlantısını Kopyala",qrCode:"QR Kod",viewPhotos:"Fotoğrafları Görüntüle",viewPhotosCount:"Fotoğrafları Görüntüle ({{count}})",projectPage:"Proje Sayfası",addToFavorites:"Favorilere Ekle",removeFromFavorites:"Favorilerden Kaldır",edit:"Düzenle",printLog:"Baskı Günlüğü",goToProject:"Projeye Git: {{name}}",addToProject:"Projeye Ekle",removeFromProject:"Projeden Kaldır",loading:"Yükleniyor...",noProjectsAvailable:"Kullanılabilir proje yok",searchProjects:"Projelerde ara…",select:"Seç",deselect:"Seçimi Kaldır",delete:"Sil"},permission:{noReprint:"Bu arşivi yeniden yazdırma izniniz yok",noAddToQueue:"Kuyruğa ekleme izniniz yok",noUpdateArchives:"Arşivleri güncelleme izniniz yok",noUploadFiles:"Dosya yükleme izniniz yok",noDownload:"Arşivleri indirme izniniz yok",noCopyLink:"İndirme bağlantılarını kopyalama izniniz yok",noDelete:"Bu arşivi silme izniniz yok",noCreate:"Arşiv oluşturma izniniz yok"},platePicker:{title:"Önizleme için plaka seçin",hint:"Bu arşivde birden fazla plaka var. GCode görüntüleyicide açmak için birini seçin.",plateLabel:"Plaka {{index}}",objectCount:"{{count}} nesne",objectCount_plural:"{{count}} nesne",noGcode:"Bu arşivin önizleme için dilimlenmiş G-kodu yok. Önce dilimlemek için Bambu Studio'da açın."},card:{previousPlate:"Önceki plaka",nextPlate:"Sonraki plaka",plateNumber:"Plaka {{index}}",moreOptions:"Daha fazla seçenek için sağ tıklayın",addToFavorites:"Favorilere ekle",removeFromFavorites:"Favorilerden kaldır",cancelled:"iptal edildi",failed:"başarısız",duplicate:"tekrar",duplicateTitle:"Bu model daha önce yazdırıldı",openSource3mf:"Kaynak 3MF'yi Bambu Studio'da aç (daha fazla seçenek için sağ tıklayın)",downloadF3d:"Fusion 360 tasarım dosyasını indir",viewTimelapse:"Zaman atlamalı videoyu görüntüle",viewPhoto:"1 fotoğrafı görüntüle",viewPhotos:"{{count}} fotoğrafı görüntüle",openFolder:"Klasörü aç: {{name}}",slicedFile:"Dilimlenmiş dosya - yazdırmaya hazır",sourceFile:"Yalnızca kaynak dosya - AMS eşlemesi mevcut değil",gcode:"GCODE",source:"KAYNAK",project:"Proje: {{name}}",runsBadge:"{{count}} baskı",runsBadgeTitle:"Toplam {{count}} baskı — {{successful}} başarılı, {{failed}} başarısız. Tam baskı günlüğünü görmek için tıklayın.",estimated:"Tahmini: {{time}}",actual:"Gerçek: {{time}}",accuracy:"Doğruluk: %{{percent}}",filament:"{{weight}}g",layer:"{{count}} katman",layers:"{{count}} katman",object:"{{count}} nesne",objects:"{{count}} nesne",slicedFor:"{{model}} için dilimlendi",uploadedBy:"Yükleyen",noPermissionReprint:"Yeniden yazdırma izniniz yok",noFileForReprint:"Kullanılabilir 3MF dosyası yok — baskı kaydedildiğinde dosya yazıcıdan indirilemedi",noPermissionEdit:"Arşivleri düzenleme izniniz yok",noPermissionDelete:"Arşivleri silme izniniz yok",reprint:"Tekrar Yazdır",schedulePrint:"Baskıyı Zamanla",schedule:"Zamanla",openInBambuStudio:"Dilimleyicide Aç",openInBambuStudioToSlice:"Dilimlemek için Dilimleyicide Aç",slice:"Dilimle",externalLink:"Harici Bağlantı",makerWorld:"MakerWorld: {{designer}}",viewProject:"Projeyi görüntüle",noExternalLink:"Harici bağlantı yok",preview3d:"3B Önizleme",download:"İndir",edit:"Düzenle",delete:"Sil"},runLog:{title:"Baskı Günlüğü",modalTitle:"Baskı Günlüğü — {{name}}",modalTitleFallback:"bu arşiv",empty:"Bu arşiv için henüz baskı olayı kaydedilmedi.",col:{date:"Tarih",status:"Durum",duration:"Süre",filament:"Filament",cost:"Maliyet"},status:{completed:"Tamamlandı",failed:"Başarısız",cancelled:"İptal edildi",stopped:"Durduruldu",skipped:"Atlandı",printing:"Yazdırılıyor"}},modal:{deleteArchive:"Arşivi Sil",deleteConfirm:'"{{name}}" silmek istediğinizden emin misiniz? Bu işlem geri alınamaz.',deleteButton:"Sil",deletePurgeStats:"Ayrıca bu baskıyı Hızlı İstatistiklerden de kaldır (filament, süre, maliyet, enerji)",removeSource3mf:"Kaynak 3MF Kaldır",removeSource3mfConfirm:'"{{name}}" dosyasından kaynak 3MF dosyasını kaldırmak istediğinizden emin misiniz? Bu, orijinal dilimleyici proje dosyasını silecek.',removeButton:"Kaldır",removeF3d:"F3D Kaldır",removeF3dConfirm:'"{{name}}" dosyasından Fusion 360 tasarım dosyasını kaldırmak istediğinizden emin misiniz?',removeTimelapse:"Zaman Atlamalı Videoyu Kaldır",removeTimelapseConfirm:'"{{name}}" dosyasından zaman atlamalı videoyu kaldırmak istediğinizden emin misiniz?',timelapse:"{{name}} - Zaman Atlamalı Video",selectTimelapse:"Zaman Atlamalı Video Seç",selectTimelapseDesc:"Otomatik eşleşme bulunamadı. Bu baskı için zaman atlamalı videoyu seçin:",deleteArchives:"Arşivleri Sil",deleteArchivesConfirm:"{{count}} arşivi silmek istediğinizden emin misiniz? Bu işlem geri alınamaz.",deleteCount:"{{count}} Sil"},page:{title:"Arşivler",printsCount:"{{total}} baskıdan {{filtered}} tanesi",dropFilesHere:".3mf dosyalarını buraya bırakın",releaseToUpload:"Yüklemek için bırakın",only3mfSupported:"Yalnızca .3mf dosyaları desteklenir",close:"Kapat",selected:"{{count}} seçildi",selectAll:"Tümünü Seç",tags:"Etiketler",project:"Proje",favorite:"Favori",delete:"Sil",toggledFavorites:"{{count}} arşiv için favoriler değiştirildi",failedUpdateFavorites:"Favoriler güncellenemedi",archivesDeleted:"{{count}} arşiv silindi",failedDeleteArchives:"Arşivler silinemedi",photoDeleted:"Fotoğraf silindi",failedDeletePhoto:"Fotoğraf silinemedi"},list:{name:"Ad",printer:"Yazıcı",date:"Tarih",size:"Boyut",actions:"İşlemler",hasTimelapse:"Zaman atlamalı videosu var"},log:{date:"Tarih",printName:"Baskı Adı",printer:"Yazıcı",user:"Kullanıcı",status:"Durum",duration:"Süre",filament:"Filament",allPrinters:"Tüm Yazıcılar",allUsers:"Tüm Kullanıcılar",allStatuses:"Tüm Durumlar",cancelled:"İptal edildi",skipped:"Atlandı",dateFrom:"Başlangıç",dateTo:"Bitiş",noEntries:"Baskı günlüğü kaydı bulunamadı",showing:"{{total}} kayıttan {{count}} tanesi gösteriliyor",rowsPerPage:"Satır",page:"Sayfa",prev:"Önceki",next:"Sonraki",clearLog:"Günlüğü Temizle",clearLogTitle:"Baskı Günlüğünü Temizle",clearLogConfirm:"Tüm baskı günlüğü kayıtları kalıcı olarak silinecek. Arşivler ve kuyruk öğeleri etkilenmeyecek. Bu işlem geri alınamaz. Emin misiniz?",clearLogButton:"Hepsini Temizle",cleared:"{{count}} günlük kaydı temizlendi",clearFailed:"Baskı günlüğü temizlenemedi"}},queue:{title:"Baskı Kuyruğu",subtitle:"Baskı işlerinizi zamanlayın ve yönetin",addToQueue:"Kuyruğa Ekle",filamentShort:{rowBadge:"Atanan makara için yetersiz filament",rowTooltip:"Sevk planlayıcı bu öğeyi işaretledi. Yuva başına eksikliği görmek ve yine de yazdırıp yazdırmayacağınıza karar vermek için Oynat'a tıklayın.",confirmTitle:"Yetersiz filament",confirmIntro:"Atanan makara en az bir yuvayı karşılayamıyor. Yine de yazdırılsın mı?",lineItem:"Yuva {{slot}}: {{required}} g gerekli, {{remaining}} g kaldı",unknown:"bilinmiyor",printAnyway:"Yine de Yazdır"},print:"Yazdır",reprint:"Tekrar Yazdır",schedulePrint:"Baskıyı Zamanla",editQueueItem:"Kuyruk Öğesini Düzenle",printToPrinters:"{{count}} Yazıcıya Yazdır",queueToPrinters:"{{count}} Yazıcıya Kuyrukla",queueSelectedPlates:"{{count}} Plakayı Kuyrukla",selectAllPlates:"Tüm {{count}} Plakayı Seç",deselectAll:"Seçimi Kaldır",printQueued:"Baskı kuyruğa eklendi",itemsQueued:"{{count}} öğe kuyruğa eklendi",sending:"Gönderiliyor...",sendingProgress:"Gönderiliyor {{current}}/{{total}}...",adding:"Ekleniyor...",addingProgress:"Ekleniyor {{current}}/{{total}}...",savingProgress:"Kaydediliyor {{current}}/{{total}}...",clearQueue:"Kuyruğu Temizle",clearHistory:"Geçmişi Temizle",emptyQueue:"Kuyruk boş",position:"Konum",scheduledTime:"Zamanlanmış Süre",moveUp:"Yukarı Taşı",moveDown:"Aşağı Taşı",startNow:"Şimdi Başlat",printingInProgress:"Baskı devam ediyor...",viewArchive:"Arşivi görüntüle",viewInFileManager:"Dosya Yöneticisinde görüntüle",itemCount:"{{count}} öğe",itemCount_plural:"{{count}} öğe",dragToReorder:"Yeniden sıralamak için sürükleyin (yalnızca ASAP)",reorderHint:"Konum yalnızca ASAP öğelerini etkiler. Zamanlanmış öğeler belirlenen zamanlarında çalışır.",sjf:{label:"SJF",tooltip:"En Kısa İş İlk — planlayıcı daha kısa baskılara öncelik verir"},addedBy:"{{name}} tarafından eklendi",nextInQueue:"Kuyrukta sıradaki",clearPlateSuccess:"Plaka temizlendi — sonraki baskıya hazır",plateNumber:"Plaka {{index}}",quantity:"Miktar",quantityHint:"{{count}} kuyruk öğesi oluşturur",activeBatches:"Aktif Yığınlar",batchProgress:"{{total}} öğeden {{completed}} tanesi tamamlandı",cancelBatch:"Kalanları İptal Et",batchCancelled:"Kalan yığın öğeleri iptal edildi",cancelBatchConfirmTitle:"Yığını İptal Et",cancelBatchConfirmMessage:"Bu yığındaki tüm bekleyen öğeler iptal edilsin mi?",batch:"Yığın",sections:{currentlyPrinting:"Şu Anda Yazdırılan",queued:"Kuyruktaki",history:"Geçmiş"},status:{pending:"Beklemede",waiting:"Bekliyor",printing:"Yazdırılıyor",paused:"Duraklatıldı",completed:"Tamamlandı",failed:"Başarısız",skipped:"Atlandı",cancelled:"İptal edildi"},summary:{printing:"Yazdırılıyor",queued:"Kuyrukta",totalTime:"Toplam Kuyruk Süresi",totalWeight:"Toplam Kuyruk Ağırlığı",history:"Geçmiş"},filter:{allPrinters:"Tüm Yazıcılar",unassigned:"Atanmamış",allStatus:"Tüm Durumlar",allLocations:"Tüm Konumlar",any:"Herhangi"},sort:{byPosition:"Konuma Göre Sırala",byName:"Ada Göre Sırala",byPrinter:"Yazıcıya Göre Sırala",bySchedule:"Zamana Göre Sırala",byDate:"Tarihe Göre Sırala",ascendingOldest:"Artan (önce en eski)",descendingNewest:"Azalan (önce en yeni)"},badges:{staged:"Hazırlandı",requiresPrevious:"Önceki başarı gerekli",autoPowerOff:"Otomatik kapanma",gcodeInjection:"G-kod"},empty:{title:"Zamanlanmış baskı yok",description:'Bağlam menüsündeki "Zamanla" seçeneğini kullanarak Arşivler sayfasından bir baskı zamanlayın veya başlamak için dosyaları sürükleyip bırakın.'},time:{asap:"ASAP",overdue:"Gecikmiş",now:"Şimdi",lessThanMinute:"Bir dakikadan az",inMinutes:"{{count}} dk içinde",inHours:"{{count}} saat içinde"},actions:{stopPrint:"Baskıyı Durdur",startPrint:"Baskıyı Başlat",requeue:"Yeniden Kuyrukla"},bulkEdit:{title:"{{count}} Öğeyi Düzenle",title_plural:"{{count}} Öğeyi Düzenle",description:"Yalnızca değiştirilen ayarlar seçili öğelere uygulanacak.",printer:"Yazıcı",noChange:"— Değişiklik yok —",queueOptions:"Kuyruk Seçenekleri",staged:"Hazırlandı (manuel başlatma)",autoPowerOff:"Baskı sonrası otomatik kapanma",requirePrevious:"Önceki başarı gerekli",printOptions:"Baskı Seçenekleri",bedLevelling:"Tabla seviyelendirme",flowCalibration:"Akış kalibrasyonu",vibrationCalibration:"Titreşim kalibrasyonu",layerInspection:"İlk katman denetimi",timelapse:"Zaman atlamalı video",useAms:"AMS Kullan",applyChanges:"Değişiklikleri Uygula",selectAll:"Tümünü Seç",deselectAll:"Seçimi Kaldır",selected:"{{count}} seçildi",editSelected:"Seçilenleri Düzenle",cancelSelected:"Seçilenleri İptal Et"},confirm:{cancelTitle:"Zamanlanmış Baskıyı İptal Et",cancelMessage:'"{{name}}" iptal etmek istediğinizden emin misiniz?',stopTitle:"Baskıyı Durdur",stopMessage:'"{{name}}" mevcut baskıyı durdurmak istediğinizden emin misiniz? Bu, yazıcıdaki baskı işini iptal edecek.',removeTitle:"Geçmişten Kaldır",removeMessage:'"{{name}}" kuyruk geçmişinden kaldırmak istediğinizden emin misiniz?',clearHistoryTitle:"Geçmişi Temizle",clearHistoryMessage:"Geçmişten {{count}} öğenin tümünü kaldırmak istediğinizden emin misiniz?",cancelButton:"Baskıyı İptal Et",stopButton:"Baskıyı Durdur",thisPrint:"bu baskı",thisItem:"bu öğe"},toast:{cancelled:"Kuyruk öğesi iptal edildi",cancelFailed:"Öğe iptal edilemedi",removed:"Kuyruk öğesi kaldırıldı",removeFailed:"Öğe kaldırılamadı",stopped:"Baskı durduruldu",stopFailed:"Baskı durdurulamadı",released:"Baskı kuyruğa bırakıldı",startFailed:"Baskı başlatılamadı",reorderFailed:"Kuyruk yeniden sıralanamadı",historyCleared:"{{count}} geçmiş öğesi temizlendi",clearHistoryFailed:"Geçmiş temizlenemedi",updateFailed:"Öğeler güncellenemedi",bulkCancelled:"{{count}} öğe iptal edildi",bulkCancelFailed:"Öğeler iptal edilemedi"},timeline:{listView:"Liste",timelineView:"Zaman Çizelgesi",unassigned:"Atanmamış",noData:"Bu gün için zamanlanmış baskı yok",allDoneBy:"Tüm baskıların {{time}}'e kadar bitmesi tahmin ediliyor",staged:"Hazırlandı",filterAll:"Tümünü Göster",filterPrinting:"Yazdırılıyor",filterQueued:"Kuyrukta",time:{anyMoment:"her an",minutesLeft:"{{minutes}}dk kaldı",hoursLeft:"{{hours}}sa kaldı",hoursMinutesLeft:"{{hours}}sa {{minutes}}dk kaldı"},day:{previous:"Önceki gün",next:"Sonraki gün",today:"Bugün"}},permissions:{noStopPrint:"Baskıları durdurma izniniz yok",noStartPrint:"Baskıları başlatma izniniz yok",noEdit:"Bu kuyruk öğesini düzenleme izniniz yok",noCancel:"Bu kuyruk öğesini iptal etme izniniz yok",noRequeue:"Öğeleri yeniden kuyruklama izniniz yok",noRemove:"Bu kuyruk öğesini kaldırma izniniz yok",noClearHistory:"Tüm geçmişi temizleme izniniz yok",noEditItems:"Kuyruk öğelerini düzenleme izniniz yok",noCancelItems:"Kuyruk öğelerini iptal etme izniniz yok"}},backgroundDispatch:{unknownFile:"Bilinmeyen dosya",unknownPrinter:"Bilinmeyen yazıcı",startingPrints:"Baskılar başlatılıyor",progressSummary:"{{complete}}/{{total}} tamamlandı • Sevk edildi: {{dispatched}} • İşleniyor: {{processing}}",expandDetails:"Sevk ayrıntılarını genişlet",collapseDetails:"Sevk ayrıntılarını daralt",dismissToast:"Sevk bildirimini kapat",cancelDispatchJob:"Sevk işini iptal et",cancel:"İptal",cancelling:"İptal ediliyor…",awaitingPrinter:"Yazıcı bekleniyor…",status:{dispatched:"Sevk Edildi",processing:"İşleniyor",completed:"Tamamlandı",failed:"Başarısız",cancelled:"İptal edildi"},toast:{cancellingUpload:"Yükleme iptal ediliyor...",cancelled:"Sevk iptal edildi",cancelFailed:"Sevk iptal edilemedi",completeWithFailures:"Arka plan sevki tamamlandı: {{completed}} başarılı, {{failed}} başarısız",completeSuccess:"Arka plan sevki tamamlandı: {{completed}} başarılı",printStartedRemaining:"{{completed}} baskı başlatıldı, {{remaining}} tane daha gönderiliyor..."}},stats:{title:"İstatistikler",subtitle:"Yeniden düzenlemek için widget'ları sürükleyin. Gizlemek için göz simgesine tıklayın.",overview:"Genel Bakış",totalPrints:"Toplam Baskı",successRate:"Başarı Oranı",totalPrintTime:"Toplam Baskı Süresi",printTime:"Baskı Süresi",totalFilament:"Toplam Kullanılan Filament",filamentUsed:"Kullanılan Filament",filamentCost:"Filament Maliyeti",totalCost:"Toplam Maliyet",energyUsed:"Kullanılan Enerji",energyCost:"Enerji Maliyeti",energyWarmingUpTooltip:"Enerji takibi hâlâ saatlik anlık görüntüler topluyor. Tarih aralığı toplamları, seçilen aralıktan önce en az bir anlık görüntü olduğunda doğru hâle gelir. Erken değerler eksik sayabilir.",averagePrintTime:"Ortalama Baskı Süresi",printsPerDay:"Günlük Baskı",byPrinter:"Yazıcıya Göre",printsByPrinter:"Yazıcıya Göre Baskılar",byMaterial:"Malzemeye Göre",byMonth:"Aya Göre",last7Days:"Son 7 Gün",last30Days:"Son 30 Gün",last90Days:"Son 90 Gün",allTime:"Tüm Zamanlar",quickStats:"Hızlı İstatistikler",printActivity:"Baskı Etkinliği",filamentTypes:"Filament Türleri",filamentTrends:"Filament Trendleri",failureAnalysis:"Başarısızlık Analizi",timeAccuracy:"Süre Doğruluğu",successful:"Başarılı:",failed:"Başarısız:",cancelled:"İptal edildi:",perfectEstimate:"%100 = mükemmel tahmin",noTimeAccuracyData:"Henüz süre doğruluğu verisi yok",noFilamentData:"Filament verisi mevcut değil",noPrinterData:"Yazıcı verisi mevcut değil",noPrintData:"Baskı verisi mevcut değil",noPrintDataLast30Days:"Son 30 günde baskı verisi yok",failureReasons:"Başarısızlık Nedenleri",topFailureReasons:"En Sık Başarısızlık Nedenleri",failedPrintsCount:"{{total}} baskının {{failed}} tanesi başarısız",lastWeekRate:"Geçen hafta: %{{rate}}",resetLayout:"Düzeni Sıfırla",recalculateCosts:"Maliyetleri Yeniden Hesapla",recalculateCostsHint:"Mevcut filament fiyatlarını kullanarak tüm arşiv maliyetlerini yeniden hesapla",exportStats:"İstatistikleri Dışa Aktar",exportAsCsv:"CSV Olarak Dışa Aktar",exportAsExcel:"Excel Olarak Dışa Aktar",hiddenCount:"{{count}} Gizli",exportDownloaded:"Dışa aktarma indirildi",exportFailed:"Dışa aktarma başarısız",layoutReset:"Düzen sıfırlandı",recalculatedCosts:"{{count}} arşiv için maliyetler yeniden hesaplandı",recalculateFailed:"Maliyetler yeniden hesaplanamadı",loadingStats:"İstatistikler yükleniyor...",noPermissionResetLayout:"Düzeni sıfırlama izniniz yok",noPermissionRecalculate:"Maliyetleri yeniden hesaplama izniniz yok",noPrintDataInRange:"Seçili aralıkta baskı verisi yok",periodFilament:"Dönem Filamenti",periodCost:"Dönem Maliyeti",avgPerPrint:"Baskı Başına Ort.",usageOverTime:"Zaman İçinde Kullanım",filamentByWeight:"Ağırlık",printDuration:"Baskı Süresi",printerUtilization:"Yazıcı Kullanımı",filamentSuccess:"Malzemeye Göre Başarı",printHabits:"Baskı Alışkanlıkları",printTimeOfDay:"Günün Baskı Saati",colorDistribution:"Renk Dağılımı",noColorData:"Renk verisi mevcut değil",records:"Kayıtlar",longestPrint:"En Uzun Baskı",heaviestPrint:"En Ağır Baskı",mostExpensivePrint:"En Pahalı",busiestDay:"En Yoğun Gün",successStreak:"Başarı Serisi",streakPrint:"ardışık baskı",streakPrints:"{{count}} ardışık baskı",printerStats:"Yazıcı İstatistikleri",hours:"saat",avgPrints:"Ort. baskı",noArchiveData:"Baskı verisi mevcut değil",filamentByTime:"Süre",avgWeight:"Ort. ağırlık",avgTime:"Ort. süre",filamentByPrints:"Baskılar",timeframe:{today:"Bugün","this-week":"Bu Hafta","this-month":"Bu Ay","last-7":"Son 7 Gün","last-30":"Son 30 Gün","last-90":"Son 90 Gün","this-year":"Bu Yıl","all-time":"Tüm Zamanlar",custom:"Özel Aralık",from:"Başlangıç",to:"Bitiş"},allUsers:"Tüm Kullanıcılar",noUser:"Kullanıcı Yok (Sistem)",filterByUser:"Kullanıcıya Göre Filtrele"},maintenance:{title:"Bakım",overview:"Genel Bakış",allOk:"Tüm bakım güncel",dueCount:"{{count}} öğe bekliyor",dueCount_plural:"{{count}} öğe bekliyor",warningCount:"{{count}} uyarı",warningCount_plural:"{{count}} uyarı",totalPrintTime:"Toplam Baskı Süresi",nextMaintenance:"Sonraki Bakım",nothingDue:"Bekleyen yok",tasks:"Görevler",lastPerformed:"Son yapılan",interval:"Aralık",hoursRemaining:"{{hours}}sa kaldı",hoursOverdue:"{{hours}}sa gecikmiş",markDone:"Tamamlandı Olarak İşaretle",performMaintenance:"Bakım Gerçekleştir",history:"Geçmiş",noHistory:"Bakım geçmişi yok",editPrintHours:"Baskı Saatlerini Düzenle",currentHours:"Mevcut Saat",statusTab:"Durum",settingsTab:"Ayarlar",overdueCount:"{{count}} gecikmiş",dueSoonCount:"{{count}} yakında",dueSoon:"Yakında",allGood:"Her şey iyi",overdueBy:"{{duration}} gecikmiş",dueIn:"{{duration}} içinde",timeLeft:"{{duration}} kaldı",day:"1 gün",days:"{{count}} gün",week:"1 hafta",weeks:"{{count}} hafta",month:"1 ay",months:"{{count}} ay",year:"1 yıl",maintenanceTypes:"Bakım Türleri",maintenanceTypesDescription:"Sistem türleri ve özel bakım görevleriniz",addCustomType:"Özel Tür Ekle",restoreDefaults:"Varsayılan Görevleri Geri Yükle",intervalType:"Aralık Türü",intervalValue:"Aralık ({{type}})",icon:"Simge",documentationLink:"Dokümantasyon Bağlantısı (isteğe bağlı)",assignToPrinters:"Yazıcılara Ata",selectAtLeastOnePrinter:"En az bir yazıcı seçin",addType:"Tür Ekle",custom:"Özel",printHours:"Baskı Saatleri",calendarDays:"Takvim Günleri",exampleName:"örn., HEPA Filtresini Değiştir",viewDocumentation:"Dokümantasyonu görüntüle",timeBasedInterval:"Zaman tabanlı aralık",intervalOverrides:"Aralık Geçersiz Kılmaları",intervalOverridesDescription:"Belirli yazıcılar için aralıkları özelleştir",assignedToPrinters:"Atanan yazıcılar:",noPrintersAssigned:"Atanan yazıcı yok",addPrinterShort:"Ekle:",printersAssignedClick:"{{count}} yazıcı atandı - yönetmek için tıklayın",removeFromPrinter:"Bu yazıcıdan kaldır",types:{lubricateCarbonRods:"Karbon Çubukları Yağla",lubricateRails:"Lineer Rayları Yağla",cleanNozzle:"Nozulu/Hotend Temizle",checkBelts:"Kayış Gerginliğini Kontrol Et",cleanBuildPlate:"Baskı Plakasını Temizle",checkExtruder:"Ekstrüder Dişlilerini Kontrol Et",checkCooling:"Soğutma Fanlarını Kontrol Et",generalInspection:"Genel Denetim",cleanCarbonRods:"Karbon Çubukları Temizle",lubricateSteelRods:"Çelik Çubukları Yağla",cleanSteelRods:"Çelik Çubukları Temizle",cleanLinearRails:"Lineer Rayları Temizle",checkPtfeTube:"PTFE Tüpünü Kontrol Et",replaceHepaFilter:"HEPA Filtresini Değiştir",replaceCarbonFilter:"Karbon Filtresini Değiştir",lubricateLeftNozzleRail:"Sol Nozul Rayını Yağla"},maintenanceComplete:"Bakım tamamlandı olarak işaretlendi",typeUpdated:"Bakım türü güncellendi",typeDeleted:"Bakım türü silindi",defaultsRestored:"{{count}} varsayılan görev geri yüklendi",printHoursUpdated:"Baskı saatleri güncellendi",printerAssigned:"Yazıcı atandı",printerRemoved:"Yazıcı kaldırıldı",deleteTypeConfirm:'"{{name}}" silinsin mi?',deleteSystemTypeTitle:"Varsayılan bakım görevi silinsin mi?",deleteSystemTypeMessage:'"{{name}}" varsayılan bakım görevini silmek istediğinizden emin misiniz?',noPermissionUpdate:"Bakım öğelerini güncelleme izniniz yok",noPermissionPerform:"Bakım gerçekleştirme izniniz yok",noPermissionEditTypes:"Bakım türlerini düzenleme izniniz yok",noPermissionDeleteTypes:"Bakım türlerini silme izniniz yok",noPermissionEditHours:"Baskı saatlerini düzenleme izniniz yok",noPermissionRemovePrinter:"Yazıcı atamalarını kaldırma izniniz yok",noPermissionAssignPrinter:"Yazıcı atama izniniz yok",noPermissionEditIntervals:"Aralıkları düzenleme izniniz yok",configureSettings:"Bakım türlerini ve aralıklarını yapılandır"},settings:{title:"Ayarlar",general:"Genel",tabs:{general:"Genel",smartPlugs:"Akıllı Prizler",notifications:"Bildirimler",queue:"İş Akışı",filament:"Filament",network:"Ağ",apiKeys:"API Anahtarları",virtualPrinter:"Sanal Yazıcı",spoolbuddy:"SpoolBuddy",failureDetection:"Başarısızlık Algılama",users:"Kimlik Doğrulama",backup:"Yedekleme",emailAuth:"E-posta Kimlik Doğrulama",ldap:"LDAP",twoFa:"İki Faktörlü Kimlik Doğrulama",oidc:"SSO / OIDC",security:"Güvenlik"},spoolbuddy:{infoTitle:"SpoolBuddy cihazları",infoBody:"SpoolBuddy kioskları heartbeat üzerinden otomatik olarak kayıt olur. Artık kullanılmıyorsa veya bir daemon çökmesi nedeniyle eski bir kopya kaldıysa bir cihazı buradan kayıttan çıkarın.",duplicatesTitle:"{{count}} cihaz kayıtlı",duplicatesBody:"Yalnızca ilk kayıtlı cihaz kiosk arayüzü tarafından kullanılır. Bunlardan biri çökme sonucu kalmış eski bir kopya ise kayıttan çıkarın — çevrimiçi bir cihaz sonraki heartbeat'inde kendini yeniden kaydedecek.",empty:"Henüz kayıtlı SpoolBuddy cihazı yok.",online:"Çevrimiçi",offline:"Çevrimdışı",unregister:"Kayıttan Çıkar",unregisterSuccess:"Cihaz kayıttan çıkarıldı",unregisterError:"Cihaz kayıttan çıkarılamadı",confirmTitle:"SpoolBuddy cihazı kayıttan çıkarılsın mı?",confirmBody:`Bu, "{{hostname}}" ({{deviceId}}) cihazını veritabanından kaldıracak. Cihaz çevrimiçiyse, sonraki heartbeat'inde kendini yeniden kaydedecek.`,ipAddress:"IP adresi",firmware:"Firmware",lastSeen:"Son görülme",daemonUptime:"Daemon çalışma süresi",systemUptime:"Sistem çalışma süresi",never:"asla",nfc:"NFC",scale:"Tartı",cpuTemp:"CPU sıcaklığı",cpuLoad:"CPU yükü",memory:"Bellek",disk:"Disk",update:"Güncelle",updateConfirmTitle:"Spoolbuddy daemon güncellensin mi?",updateConfirmBody:'"{{hostname}}" cihazında yazılım güncellemesi tetiklensin mi? Güncelleme uygulandığında daemon yeniden başlayacak.',restartBrowser:"Tarayıcıyı Yeniden Başlat",restartBrowserConfirmTitle:"Kiosk tarayıcısı yeniden başlatılsın mı?",restartBrowserConfirmBody:'"{{hostname}}" cihazındaki kiosk tarayıcısı yeniden başlatılsın mı? Ekran kısa bir süre kararacak.',restartDaemon:"Daemon'u Yeniden Başlat",restartDaemonConfirmTitle:"Spoolbuddy daemon yeniden başlatılsın mı?",restartDaemonConfirmBody:'"{{hostname}}" üzerindeki Spoolbuddy daemon yeniden başlatılsın mı? Cihaz birkaç saniye çevrimdışı olacak.',reboot:"Yeniden Başlat",rebootConfirmTitle:"Cihaz yeniden başlatılsın mı?",rebootConfirmBody:'"{{hostname}}" yeniden başlatılsın mı? Cihaz yaklaşık bir dakika çevrimdışı olacak.',shutdown:"Kapat",shutdownConfirmTitle:"Cihaz kapatılsın mı?",shutdownConfirmBody:'"{{hostname}}" kapatılsın mı? Tekrar açmak için fiziksel erişime ihtiyacınız olacak.',commandConfirm:"Onayla",commandQueued:"Komut kuyruğa alındı",commandError:"Komut gönderilemedi"},ldap:{title:"LDAP Kimlik Doğrulama",enabledDesc:"LDAP kimlik doğrulama etkin",disabledDesc:"LDAP kimlik doğrulama devre dışı",disabledHint:"Aşağıdaki LDAP ayarlarını yapılandırın ve kaydedin, ardından etkinleştirin.",enabled:"LDAP kimlik doğrulama etkinleştirildi",disabled:"LDAP kimlik doğrulama devre dışı bırakıldı",feature1:"Kullanıcılar LDAP kimlik bilgileriyle giriş yapabilir",feature2:"Yerel yönetici hesabı yedek olarak kalır",feature3:"LDAP grupları giriş sırasında BamBuddy gruplarına eşlenir",serverConfig:"LDAP Sunucu Yapılandırması",serverUrl:"Sunucu URL",serverUrlHint:"SSL için ldaps:// veya StartTLS ile ldap:// kullanın",security:"Güvenlik",securityHint:"StartTLS düz bir bağlantıyı TLS'ye yükseltir. LDAPS başlangıçtan itibaren TLS kullanır.",bindDn:"Bind DN (Servis Hesabı)",bindPassword:"Bind Parolası",searchBase:"Arama Tabanı DN",userFilter:"Kullanıcı Arama Filtresi",userFilterHint:"{username} giriş kullanıcı adıyla değiştirilir. OpenLDAP için (uid={username}) kullanın.",advanced:"Gelişmiş",autoProvision:"Kullanıcıları otomatik tedarik et",autoProvisionHint:"İlk LDAP girişinde otomatik olarak BamBuddy hesabı oluştur",defaultGroup:"Varsayılan grup",defaultGroupNone:"— Hiçbiri (yedek yok) —",defaultGroupHint:"Bir LDAP kullanıcısı kimlik doğruladığında ancak eşlenmiş herhangi bir LDAP grubunda listelenmediğinde atanan yedek grup. Eşlenmemiş kullanıcıları izinsiz bırakmak için boş bırakın.",groupMapping:"Grup Eşleme (JSON)",groupMappingHint:"LDAP grup DN'lerini BamBuddy gruplarına eşle. Kullanılabilir gruplar: ",testConnection:"Bağlantıyı Test Et",settingsSaved:"LDAP ayarları kaydedildi",errors:{serverRequired:"LDAP sunucu URL gerekli",searchBaseRequired:"Arama tabanı DN gerekli",enableAuthFirst:"Önce kimlik doğrulamayı etkinleştirin",configureLdapFirst:"Önce LDAP ayarlarını kaydedin"}},email:{smtpSettings:"SMTP Yapılandırması",smtpHost:"SMTP Sunucusu",smtpPort:"SMTP Portu",security:"Güvenlik",authentication:"Kimlik Doğrulama",username:"Kullanıcı Adı",password:"Parola",fromEmail:"Gönderen E-posta",fromName:"Gönderen Adı",testConnection:"SMTP Bağlantısını Test Et",testRecipient:"Test Alıcı E-postası",sendTest:"Test E-postası Gönder",sending:"Gönderiliyor...",save:"Ayarları Kaydet",saving:"Kaydediliyor...",advancedAuth:"Gelişmiş Kimlik Doğrulama",advancedAuthEnabled:"Gelişmiş Kimlik Doğrulama etkin",advancedAuthEnabledDesc:"E-posta tabanlı kullanıcı yönetimi özellikleri aktif. Yeni kullanıcılar e-posta ile otomatik oluşturulan parolalar alacak ve kullanıcılar parola sıfırlama özelliğiyle parolalarını sıfırlayabilecek.",advancedAuthDisabled:"Gelişmiş Kimlik Doğrulama devre dışı",advancedAuthDisabledDesc:"Kullanıcı yönetimi için e-posta tabanlı özellikleri etkinleştirmek için gelişmiş kimlik doğrulamayı etkinleştirin.",enable:"Etkinleştir",disable:"Devre dışı bırak",feature1:"Parolalar otomatik oluşturulur ve yeni kullanıcılara e-posta ile gönderilir",feature2:"Kullanıcılar kullanıcı adı veya e-posta ile giriş yapabilir",feature3:"Parola unuttum özelliği kullanılabilir",feature4:"Yöneticiler kullanıcı parolalarını e-posta ile sıfırlayabilir",errors:{requiredFields:"Lütfen tüm zorunlu alanları doldurun",usernameRequired:"Kimlik doğrulama etkinken kullanıcı adı zorunludur",enterTestEmail:"Lütfen test e-posta adresi girin",smtpServerAndEmail:"Test etmeden önce lütfen SMTP Sunucusu ve Gönderen E-posta alanlarını doldurun",usernamePasswordRequired:"Kimlik doğrulama etkinken Kullanıcı Adı ve Parola zorunludur",configureSmtpFirst:"Lütfen önce SMTP ayarlarını yapılandırın ve test edin",enableAuthFirst:"E-posta tabanlı özellikleri kullanmak için lütfen önce kimlik doğrulamayı etkinleştirin."},success:{settingsSaved:"SMTP ayarları başarıyla kaydedildi"},securityOptions:{starttls:"STARTTLS (Port 587)",ssl:"SSL/TLS (Port 465)",none:"Hiçbiri (Port 25)"},authOptions:{enabled:"Etkin",disabled:"Devre dışı"}},appearance:"Görünüm",notifications:"Bildirimler",smartPlugs:"Akıllı Prizler",spoolman:"Spoolman",updates:"Güncellemeler",language:"Dil",languageDescription:"Tercih ettiğiniz dili seçin",theme:"Tema",themeLight:"Açık",themeDark:"Koyu",themeSystem:"Sistem",defaultView:"Varsayılan Görünüm",defaultViewDescription:"Uygulamayı açarken gösterilecek sayfa",checkForUpdates:"Güncellemeleri Kontrol Et",autoUpdate:"Otomatik Güncelleme",currentVersion:"Mevcut Sürüm",latestVersion:"En Son Sürüm",upToDate:"Güncelsiniz",updateAvailable:"Güncelleme mevcut",notificationLanguage:"Bildirim Dili",notificationLanguageDescription:"Push bildirimleri için dil",bedCooledThreshold:"Tabla Soğuma Eşiği",bedCooledThresholdDescription:"Bir baskıdan sonra tablanın soğumuş kabul edildiği sıcaklık",userNotificationsEnabled:"Kullanıcı Bildirimleri",userNotificationsEnabledDescription:"Baskı işi olayları için kullanıcı bildirim menüsünü ve e-posta bildirimlerini etkinleştir. Gelişmiş Kimlik Doğrulama gerektirir.",userNotificationsDisabledHint:"Kullanıcı bildirimlerini kullanmak için Gelişmiş Kimlik Doğrulamayı etkinleştirin.",notificationProviders:"Bildirim Sağlayıcıları",addProvider:"Sağlayıcı Ekle",editProvider:"Sağlayıcıyı Düzenle",providerType:"Sağlayıcı Türü",testNotification:"Test Bildirimi",testSuccess:"Test bildirimi başarıyla gönderildi",testFailed:"Test bildirimi gönderilemedi",quietHours:"Sessiz Saatler",quietHoursDescription:"Bu saatler arasında rahatsız etme",quietHoursStart:"Başlangıç",quietHoursEnd:"Bitiş",events:{title:"Bildirim Olayları",printStart:"Baskı Başladı",printComplete:"Baskı Tamamlandı",printFailed:"Baskı Başarısız",printStopped:"Baskı Durduruldu",printProgress:"İlerleme Kilometre Taşları",printProgressDescription:"%25, %50, %75'te bildir",printerOffline:"Yazıcı Çevrimdışı",printerError:"Yazıcı Hatası",filamentLow:"Az Filament",maintenanceDue:"Bakım Zamanı",maintenanceDueDescription:"Bakım gerektiğinde bildir"},smartPlug:{title:"Akıllı Prizler",add:"Akıllı Priz Ekle",edit:"Akıllı Prizi Düzenle",name:"Ad",ipAddress:"IP Adresi",linkedPrinter:"Bağlı Yazıcı",autoOn:"Otomatik Aç",autoOnDescription:"Baskı başladığında aç",autoOff:"Otomatik Kapat",autoOffDescription:"Baskı tamamlandıktan sonra kapat",offDelay:"Kapatma Gecikmesi",offDelayMinutes:"Baskıdan sonra dakika",offDelayTemp:"Nozul sıcaklığın altında olduğunda",currentState:"Mevcut Durum",turnOn:"Aç",turnOff:"Kapat"},filamentTracking:"Filament Takibi",filamentTrackingDesc:"Filament makaralarınızı nasıl takip edeceğinizi seçin. Yerleşik envanteri kullanabilir veya harici bir Spoolman sunucusuna bağlanabilirsiniz.",filamentChecks:"Filament kontrolleri",disableFilamentWarnings:"Filament uyarılarını devre dışı bırak",disableFilamentWarningsDesc:"Yazdırırken veya kuyruğa eklerken yetersiz filamentle ilgili uyarıları gösterme",preferLowestFilament:"En az kalan filamenti tercih et",preferLowestFilamentDesc:"Birden fazla makara eşleştiğinde, kalan filamenti en az olanı kullan",trackingModeBuiltIn:"Yerleşik Envanter",trackingModeBuiltInDesc:"RFID otomatik eşleştirme ve kullanım takibi dahil",trackingModeSpoolmanDesc:"Harici filament yönetim sunucusu",builtInFeatureRfid:"AMS'deki Bambu Lab RFID makaralarını otomatik olarak algılar",builtInFeatureUsage:"Baskı başına filament tüketimini takip eder",builtInFeatureCatalog:"Makaraları, renkleri ve K faktör profillerini yönetin",builtInFeatureThirdParty:"Üçüncü taraf makaralar envanter makaralarına atanabilir",amsSyncButton:"AMS'den Ağırlıkları Senkronize Et",amsSyncTitle:"AMS'den Makara Ağırlıklarını Senkronize Et",amsSyncMessage:"Bu, bağlı yazıcılardan gelen mevcut AMS kalan% değerleriyle tüm envanter makara ağırlıklarının üzerine yazar. Bozuk ağırlık verilerinden kurtarmak için bunu kullanın. Yazıcılar çevrimiçi olmalıdır.",amsSyncing:"Senkronize ediliyor...",amsSyncSuccess:"{{synced}} makara senkronize edildi, {{skipped}} atlandı",amsSyncError:"AMS'den ağırlıklar senkronize edilemedi",spoolmanAmsSyncButton:"AMS'den Spoolman Ağırlıklarını Senkronize Et",spoolmanAmsSyncTitle:"AMS'den Spoolman Makara Ağırlıklarını Senkronize Et",spoolmanAmsSyncMessage:"Bu, bağlı yazıcılardan gelen mevcut AMS kalan% değerlerine göre tüm Spoolman makara ağırlıklarını güncelleyecek. Yazıcılar çevrimiçi olmalıdır.",spoolmanAmsSyncing:"Senkronize ediliyor...",spoolmanAmsSyncSuccess:"{{synced}} makara senkronize edildi, {{skipped}} atlandı",spoolmanAmsSyncError:"Spoolman ağırlıkları AMS'den senkronize edilemedi",spoolmanAmsSyncErrorUnreachable:"Spoolman ağırlıkları senkronize edilemedi (Spoolman erişilemez)",spoolmanAmsSyncErrorNotConfigured:"Spoolman ağırlıkları senkronize edilemedi (Spoolman yapılandırılmamış)",spoolmanNotConfigured:"Spoolman yapılandırılmamış",spoolmanFilamentCatalogTitle:"Spoolman Filament Kataloğu",spoolmanFilamentCatalogDesc:"Spoolman örneğinizden filament adları ve boş ağırlıkları. Ad ve makara ağırlığı burada düzenlenebilir; diğer tüm özellikler doğrudan Spoolman'da yönetilir.",spoolmanUrl:"Spoolman URL",spoolmanUrlHint:"Spoolman sunucunuzun URL'si (örn., http://localhost:7912)",spoolmanConnected:"Bağlı",spoolmanDisconnected:"Bağlı değil",status:"Durum",connect:"Bağlan",disconnect:"Bağlantıyı Kes",howSyncWorks:"Senkronizasyon Nasıl Çalışır",syncInfoRfidOnly:"Yalnızca RFID'li resmi Bambu Lab makaraları senkronize edilir",syncInfoAutoCreate:"Yeni makaralar ilk senkronizasyonda Spoolman'da otomatik olarak oluşturulur",syncInfoThirdPartySkipped:"Bambu Lab dışı makaralar (üçüncü taraf, yeniden doldurulmuş) atlanır",linkingExistingSpools:"Mevcut Makaraları Bağlama",linkingExistingSpoolsDesc:`Mevcut Spoolman makaralarını AMS'inize bağlamak için, bir AMS yuvasının üzerine gelin ve "Spoolman'a Bağla"ya tıklayın.`,syncMode:"Senkronizasyon Modu",syncModeAuto:"Otomatik",syncModeManual:"Yalnızca Manuel",syncModeAutoDesc:"Değişiklikler algılandığında AMS verisi otomatik olarak senkronize edilir",syncModeManualDesc:"Yalnızca manuel olarak tetiklendiğinde senkronize et",syncAmsData:"AMS Verisini Senkronize Et",syncAmsDataDesc:"Yazıcı AMS verisini manuel olarak Spoolman'a senkronize et",allPrinters:"Tüm Yazıcılar",noDefaultPrinter:"Varsayılan yok (her seferinde sor)",sidebarOrder:"Kenar çubuğu sırası",saveThumbnails:"Küçük resimleri kaydet",captureFinishPhoto:"Bitiş fotoğrafı çek",noPrintersConfigured:"Yapılandırılmış yazıcı yok",archiveMode:{always:"Her zaman arşiv girişi oluştur",never:"Asla arşiv girişi oluşturma",ask:"Her seferinde sor"},checkForUpdatesLabel:"Güncellemeleri kontrol et",checkPrinterFirmware:"Yazıcı firmware'ini kontrol et",includeBetaUpdates:"Beta sürümleri dahil et",includeBetaUpdatesDesc:"Güncellemeleri kontrol ederken beta ve önyayım sürümleri hakkında bildir",enableRetry:"Yeniden denemeyi etkinleştir",homeAssistantDescription:"Akıllı prizleri Home Assistant üzerinden kontrol et",environmentManagedLabel:"(Ortam Yönetiliyor)",autoEnabledViaEnv:"Ortam değişkenleriyle otomatik etkinleştirildi",urlFromEnvReadOnly:"Değer HA_URL ortam değişkeniyle ayarlandı (salt okunur)",tokenFromEnvReadOnly:"Değer HA_TOKEN ortam değişkeniyle ayarlandı (salt okunur)",mqttConnectedTo:"Bağlı",prometheusDescription:"Yazıcı verisini Prometheus formatında sun",noSmartPlugsTitle:"Yapılandırılmış akıllı priz yok",noSmartPlugsDescription:"Enerji kullanımını takip etmek ve güç kontrolünü otomatikleştirmek için Tasmota tabanlı bir akıllı priz ekleyin.",noProvidersTitle:"Yapılandırılmış sağlayıcı yok",noProvidersDescription:"Uyarı almak için bir sağlayıcı ekleyin.",noTemplatesAvailable:"Şablon mevcut değil. Varsayılan şablonları yüklemek için arka ucu yeniden başlatın.",apiPermissionView:"Yazıcı durumunu ve kuyruğu görüntüle",apiPermissionEdit:"Baskı kuyruğundan öğe ekle ve kaldır",apiKeysEmptyTitle:"API anahtarı yok",apiKeysEmptyDescription:"Harici servislerle entegre olmak için bir API anahtarı oluşturun.",noUsersFound:"Kullanıcı bulunamadı",noGroupsFound:"Grup bulunamadı",noGroupsAvailable:"Kullanılabilir grup yok",passwordsDoNotMatch:"Parolalar eşleşmiyor",systemGroupWarning:"Sistem grubu adları değiştirilemez",authDisabledTitle:"Kimlik Doğrulama Devre Dışı",authDisabledFeature1:"Sisteme erişmek için giriş gerektir",authDisabledFeature2:"Grup tabanlı izinlerle birden fazla kullanıcı oluştur",authDisabledFeature3:"50'den fazla ayrıntılı izinle erişimi kontrol et",userHasCreated:"Bu kullanıcı şunları oluşturdu:",userItemsQuestion:"Bu öğelerle ne yapmak istersiniz?",deleteUserConfirm:"Bu kullanıcıyı silmek istediğinizden emin misiniz?",actionCannotBeUndone:"Bu işlem geri alınamaz.",addFirstSmartPlug:"İlk Akıllı Prizinizi Ekleyin",providers:"Sağlayıcılar",log:"Günlük",testAll:"Hepsini Test Et",testResults:"Test Sonuçları",testPassedCount:"{{count}} başarılı",testFailedCount:"{{count}} başarısız",messageTemplates:"Mesaj Şablonları",messageTemplatesDescription:"Her olay için bildirim mesajlarını özelleştirin.",apiKeys:"API Anahtarları",apiKeysDescription:"Harici entegrasyonlar ve webhook'lar için API anahtarları oluşturun.",createKey:"Anahtar Oluştur",apiKeyCreated:"API Anahtarı Başarıyla Oluşturuldu",apiKeyCopyWarning:"Bu anahtarı şimdi kopyalayın - bir daha gösterilmeyecek!",useInApiBrowser:"API Tarayıcısında Kullan",createNewApiKey:"Yeni API Anahtarı Oluştur",keyName:"Anahtar Adı",keyNamePlaceholder:"örn., Home Assistant, OctoPrint",readStatus:"Durumu Oku",readStatusDescription:"Yazıcı durumunu ve kuyruğu görüntüle",manageQueue:"Kuyruğu Yönet",manageQueueDescription:"Baskı kuyruğundan öğe ekle ve kaldır",controlPrinter:"Yazıcıyı Kontrol Et",controlPrinterDescription:"Baskıları duraklat, devam ettir ve durdur",manageLibrary:"Kütüphaneyi Yönet",manageLibraryDescription:"Kütüphane dosyalarını yükle, yeniden adlandır ve sil; MakerWorld'den model içe aktar",manageInventory:"Envanteri Yönet",manageInventoryDescription:"Makaraları ve envanter kayıtlarını oluştur, güncelle ve sil. SpoolBuddy kiosklar (NFC tarama, tartı okumaları, kiosk sistem komutları) için gereklidir.",libraryBadge:"Kütüphane",inventoryBadge:"Envanter",cloudAccess:"Bulut erişimine izin ver",cloudAccessDescription:"Adınıza Bambu Bulut ön ayarlarını ve filamentleri okuyun. Bambu Bulut'a giriş yapmış olmanız gerekir.",cloudBadge:"Bulut",updateEnergyCost:"Elektrik fiyatını güncelle",updateEnergyCostDescription:"Bu anahtarın /settings/electricity-price üzerine yeni bir kWh başına elektrik fiyatı POST etmesine izin ver. Home Assistant dinamik tarife otomasyonları (Tibber, Octopus, vb.) için kullanışlıdır. Bu, API anahtarıyla yazılabilen tek ayar alanıdır.",energyCostBadge:"Enerji",legacyKey:"Eski",legacyKeyTooltip:"Kullanıcı başına sahiplikten önce oluşturuldu; bulut erişimini kullanmak için yeniden oluşturun",unnamedKey:"Adsız Anahtar",lastUsed:"Son kullanım",read:"Oku",control:"Kontrol",createFirstKey:"İlk Anahtarınızı Oluşturun",webhookEndpoints:"Webhook Uç Noktaları",webhookApiKeyHint:"API anahtarınızı X-API-Key başlığında kullanın.",webhook:{getAllStatus:"Tüm yazıcı durumlarını al",getSpecificStatus:"Belirli yazıcı durumunu al",addToQueue:"Baskı kuyruğuna ekle",pausePrint:"Baskıyı duraklat",resumePrint:"Baskıya devam et",stopPrint:"Baskıyı durdur"},apiBrowser:"API Tarayıcısı",apiBrowserDescription:"Mevcut tüm API uç noktalarını keşfedin ve test edin.",apiKeyForTesting:"Test için API Anahtarı",apiKeyPlaceholder:"Kimlik doğrulamalı uç noktaları test etmek için API anahtarınızı buraya yapıştırın...",apiKeyHint:"Bu anahtar isteklerle birlikte X-API-Key başlığı olarak gönderilecek.",deleteApiKeyTitle:"API Anahtarını Sil",deleteApiKeyMessage:"Bu API anahtarını silmek istediğinizden emin misiniz? Bu anahtarı kullanan tüm entegrasyonlar çalışmayı durduracak.",deleteKey:"Anahtarı Sil",amsDisplayThresholds:"AMS Görüntü Eşikleri",amsThresholdsDescription:"AMS nem ve sıcaklık göstergeleri için renk eşiklerini yapılandırın.",humidity:"Nem",goodGreen:"İyi (yeşil)",fairOrange:"Orta (turuncu)",aboveFairBad:"Orta eşiğin üstü kırmızı olarak gösterilir (kötü)",fairAlsoDryingThreshold:"Bu eşik aynı zamanda etkinleştirildiğinde otomatik kurutmayı tetiklemek için de kullanılır",temperature:"Sıcaklık",goodBlue:"İyi (mavi)",aboveFairHot:"Orta eşiğin üstü kırmızı olarak gösterilir (sıcak)",historyRetention:"Geçmiş Saklama",keepSensorHistory:"Sensör geçmişini sakla",historyRetentionDescription:"Daha eski nem ve sıcaklık verileri otomatik olarak silinecek",defaultPrintOptions:"Varsayılan Baskı Seçenekleri",defaultPrintOptionsDescription:"Yeni baskılar başlatılırken baskı seçenekleri için varsayılan değerleri ayarlayın. Bunlar baskı iletişim kutusunda baskı başına geçersiz kılınabilir.",defaultBedLevelling:"Tabla Seviyelendirme",defaultBedLevellingDesc:"Baskıdan önce tablayı otomatik seviyelendir",defaultFlowCali:"Akış Kalibrasyonu",defaultFlowCaliDesc:"Ekstrüzyon akışını kalibre et",defaultVibrationCali:"Titreşim Kalibrasyonu",defaultVibrationCaliDesc:"Çınlama artefaktlarını azalt",defaultLayerInspect:"İlk Katman Denetimi",defaultLayerInspectDesc:"İlk katmanın AI denetimi",defaultTimelapse:"Zaman Atlamalı Video",defaultTimelapseDesc:"Zaman atlamalı video kaydet",staggeredStart:"Kademeli Başlatma",staggeredStartDescription:"Çoklu yazıcı toplu başlatmaları kademelendirilirken varsayılan grup boyutu ve aralığı. Baskı modalinde yığın başına geçersiz kılınabilir.",plateClear:"Plaka Temizleme Onayı",requirePlateClear:"Plaka temizleme onayı gerektir",requirePlateClearDescription:'Etkinleştirildiğinde, planlayıcı bitmiş işleri olan yazıcılarda kuyruktaki baskıları başlatmadan önce yazıcı başına plaka temizleme onayını bekler. Bunu devre dışı bırakmak ayrıca plaka durum rozetini ve yazıcı kartlarındaki "Plakayı temizlendi olarak işaretle" düğmesini gizler.',gcodeInjection:"G-kod Enjeksiyonu",gcodeInjectionDescription:'Farmloop, SwapMod, AutoClear ve Printflow 3D gibi otomatik baskı sistemleri için baskıların başlangıcında ve/veya sonunda enjekte edilecek özel G-kodu yapılandırın. Parçacıklar yazıcı modeli başına yapılandırılır ve bir kuyruk öğesinde "G-kod Enjekte Et" etkinleştirildiğinde uygulanır.',gcodeInjectionNoPrinters:"Yazıcı bulunamadı. G-kod parçacıklarını yapılandırmak için yazıcı ekleyin.",gcodeStartLabel:"Başlangıç G-kodu",gcodeEndLabel:"Bitiş G-kodu",gcodeStartPlaceholder:"Baskı başlamadan önce eklenecek G-kodu...",gcodeEndPlaceholder:"Baskı bittikten sonra eklenecek G-kodu...",staggerGroupSize:"Grup boyutu",staggerGroupSizeHelp:"Grup başına eş zamanlı başlatılacak yazıcılar",staggerInterval:"Aralık (dakika)",staggerIntervalHelp:"Her grubun başlatılması arasındaki gecikme",queueDrying:"Kuyruk Otomatik Kurutma",queueDryingDescription:"Kuyruktaki baskılar arasında yazıcı boştayken AMS filamentini otomatik olarak kurut. Kurutmayı tetiklemek için yukarıdaki nem eşiğini kullanır.",queueDryingEnabled:"Otomatik kurutmayı etkinleştir",queueDryingEnabledDescription:"Yazıcı boştayken ve nem eşiğin üzerindeyken AMS kurutmasını otomatik olarak başlat",queueDryingBlock:"Kurutmanın tamamlanmasını bekle",queueDryingBlockDescription:"Kurutma bitene kadar baskı kuyruğunu engelle. Kapalıyken, baskılar kurutmadan önceliklidir.",ambientDryingEnabled:"Ortam kurutma",ambientDryingEnabledDescription:"Kuyrukta baskı olmasa bile, nem eşiği aştığında boşta yazıcılarda filamenti otomatik olarak kurut.",dryingPresets:"Kurutma Ön Ayarları",dryingPresetsDescription:"Filament türü başına sıcaklık ve süre. AMS 2 Pro daha düşük sıcaklıklar kullanır, AMS-HT daha yüksek sıcaklıkları destekler.",dryingFilament:"Filament",printModal:"Baskı Modali",expandCustomMapping:"Özel eşlemeyi varsayılan olarak genişlet",expandCustomMappingDescription:"Birden fazla yazıcıya yazdırırken, yazıcı başına AMS eşlemesini genişletilmiş olarak göster",authentication:"Kimlik Doğrulama",authEnabledDescription:"Örneğiniz kullanıcı kimlik doğrulamayla güvende",authDisabledDescription:"Girişi gerektirmek ve kullanıcı erişimini yönetmek için etkinleştir",authDisabledMessage:"Kullanıcı hesapları oluşturmak, izinleri yönetmek ve Bambuddy örneğinizi güvende tutmak için kimlik doğrulamayı etkinleştirin.",enableAuthentication:"Kimlik Doğrulamayı Etkinleştir",currentUser:"Mevcut Kullanıcı",changePassword:"Parolayı Değiştir",admin:"Yönetici",users:"Kullanıcılar",addUser:"Kullanıcı Ekle",groups:"Gruplar",addGroup:"Grup Ekle",system:"Sistem",noDescription:"Açıklama yok",userCount:"{{count}} kullanıcı",permissionCount:"{{count}} izin",createUser:"Kullanıcı Oluştur",username:"Kullanıcı Adı",enterUsername:"Kullanıcı adı girin",password:"Parola",enterPassword:"Parola girin",passwordRequirements:"En az 8 karakter, bir büyük harf, bir küçük harf, bir rakam ve bir özel karakter ile.",confirmPassword:"Parolayı Onayla",confirmPasswordPlaceholder:"Parolayı onayla",viewReleaseOnGitHub:"Yayını GitHub'da görüntüle",turnAllPlugsOn:"Tüm prizleri aç",turnAllPlugsOff:"Tüm prizleri kapat",clearNotificationLogs:"Bildirim Günlüklerini Temizle",clearLogsMessage:"Bu, 30 günden eski tüm bildirim günlüklerini kalıcı olarak silecek. Bu işlem geri alınamaz.",clearLogs:"Günlükleri Temizle",resetUiPreferences:"Arayüz Tercihlerini Sıfırla",resetUiPreferencesMessage:"Bu, tüm arayüz tercihlerini varsayılana sıfırlayacak: kenar çubuğu sırası, tema, gösterge paneli düzeni, görünüm modları ve sıralama tercihleri. Yazıcılarınız, arşivleriniz ve sunucu ayarlarınız ETKİLENMEYECEK. Sayfa temizleme sonrası yeniden yüklenecek.",resetPreferences:"Tercihleri Sıfırla",deleteGroupTitle:"Grubu Sil",deleteGroupMessage:"Bu grubu silmek istediğinizden emin misiniz? Bu gruptaki kullanıcılar bu izinleri kaybedecek.",deleteGroup:"Grubu Sil",disableAuthenticationTitle:"Kimlik Doğrulamayı Devre Dışı Bırak",disableAuthenticationMessage:"Kimlik doğrulamayı devre dışı bırakmak istediğinizden emin misiniz? Bu, Bambuddy örneğinizi giriş yapmadan erişilebilir hale getirecek. Tüm kullanıcılar veritabanında kalacak ancak kimlik doğrulama devre dışı bırakılacak.",disableAuthentication:"Kimlik Doğrulamayı Devre Dışı Bırak",configureBambuddy:"Bambuddy'yi Yapılandır",systemDefault:"Sistem Varsayılanı",archiveSettings:"Arşiv Ayarları",newWindow:"Yeni Pencere",embeddedOverlay:"Gömülü Bindirme",preferredSlicer:"Tercih Edilen Dilimleyici",preferredSlicerDescription:"Dosyaları açmak için hangi dilimleyici uygulamasının kullanılacağını seçin",orcaslicerKnownIssuesWarning:"OrcaSlicer 2.3.2 / 2.4.0-dev, birçok Bambu yazılı 3MF'nin dilimlenmesini engelleyen bilinen CLI hatalarına sahiptir — yukarı yöndeki #12426 (boyalı çok ekstrüderli dosyalarda segfault) ve #13386 (parametre aralığı katı doğrulama reddi) sorunlarına bakın. Yukarı yön düzeltmeler gelene kadar Bambu Studio önerilir.",useSlicerApi:"Dilimleyici API kullan",useSlicerApiDescription:'Açıkken, "Dilimle" eylemleri uygulama içi dilimleyici modalini açar ve dilimleyici-API yardımcı bileşenini çağırır. Kapalıyken (varsayılan), URI şeması üzerinden masaüstü dilimleyiciye devredilirler.',slicerCard:"Dilimleyici",orcaslicerApiUrl:"OrcaSlicer yardımcı bileşen URL",bambuStudioApiUrl:"Bambu Studio yardımcı bileşen URL",slicerApiUrlDescription:"Dilimleyici-API yardımcı bileşen konteynerinin URL'si. SLICER_API_URL / BAMBU_STUDIO_API_URL ortam değişkeni varsayılanlarını kullanmak için boş bırakın.",slicerBundles:{title:"Dilimleyici Paketleri",description:`BambuStudio'dan dışa aktarılmış (Dosya → Dışa Aktar → Ön Ayar Paketini Dışa Aktar → "Yazıcı ön ayar paketi") bir Yazıcı Ön Ayar Paketi (.bbscfg) içe aktarın. İçe aktarıldıktan sonra dilimleme istekleri, JSON profil üçlüsünü yeniden yüklemeden paketten ön ayarları ada göre seçebilir.`,uploadButton:"Paket yükle",uploading:"Yükleniyor…",loading:"Paketler yükleniyor…",empty:"Henüz içe aktarılmış paket yok.",summary:"{{processCount}} işlem · {{filamentCount}} filament ön ayarı",delete:"Sil",uploadSuccess:"{{name}} içe aktarıldı",uploadError:"Paket yüklemesi başarısız: {{message}}",deleteSuccess:"Paket kaldırıldı",deleteError:"Paket silme başarısız: {{message}}",confirmDeleteTitle:"Bu paket kaldırılsın mı?",confirmDeleteMessage:'Paket yeniden içe aktarılana kadar "{{name}}" referans alan dilimleme istekleri başarısız olacak.'},externalCameras:"Harici Kameralar",costTracking:"Maliyet Takibi",printsOnly:"Yalnızca Baskılar",totalConsumption:"Toplam Tüketim",dataManagement:"Veri Yönetimi",storageUsage:"Depolama Kullanımı",storageUsageDescription:"Kategoriye göre veri kullanımı dökümü",storageUsageTotal:"Toplam",storageUsageErrors:"Hatalar",storageUsageOtherBreakdown:"Diğer (statik varlıklar, betikler ve yapılandırma dosyaları dahil)",storageUsageSystem:"Sistem",storageUsageData:"Veri",storageUsageUnavailable:"Depolama kullanım bilgisi mevcut değil",clearNotificationLogsDescription:"30 günden eski bildirim günlüklerini sil",resetUiPreferencesDescription:"Kenar çubuğu sırası, tema, görünüm modları ve düzen tercihlerini sıfırla. Yazıcılar, arşivler ve ayarlar etkilenmez.",enableHomeAssistant:"Home Assistant'ı Etkinleştir",enableMqtt:"MQTT'yi Etkinleştir",useTls:"TLS Kullan",enableMetricsEndpoint:"Metrikler Uç Noktasını Etkinleştir",availableMetrics:"Kullanılabilir Metrikler",editUser:"Kullanıcıyı Düzenle",deleteUserTitle:"Kullanıcıyı Sil",groupName:"Grup Adı",leaveEmptyForAnonymous:"Anonim için boş bırakın",leaveEmptyForNoAuth:"Kimlik doğrulama olmaması için boş bırakın",enterNewPassword:"Yeni parola girin",confirmNewPassword:"Yeni parolayı onayla",enterGroupName:"Grup adını girin",enterDescriptionOptional:"Açıklama girin (isteğe bağlı)",enterCurrentPassword:"Mevcut parolayı girin",enterNewPasswordMin6:"Yeni parolayı girin (en az 6 karakter)",toast:{keyCopied:"Anahtar panoya kopyalandı",copyFailed:"Anahtar kopyalanamadı",keyAddedToBrowser:"Anahtar API Tarayıcısına eklendi",clearLogsFailed:"Günlükler temizlenemedi",uiPreferencesReset:"Arayüz tercihleri sıfırlandı. Yenileniyor...",authDisabled:"Kimlik doğrulama başarıyla devre dışı bırakıldı",authDisableFailed:"Kimlik doğrulama devre dışı bırakılamadı",apiKeyCreated:"API anahtarı oluşturuldu",apiKeyDeleted:"API anahtarı silindi",userCreated:"Kullanıcı başarıyla oluşturuldu",userUpdated:"Kullanıcı başarıyla güncellendi",userDeleted:"Kullanıcı başarıyla silindi",groupCreated:"Grup başarıyla oluşturuldu",groupUpdated:"Grup başarıyla güncellendi",groupDeleted:"Grup başarıyla silindi",fillRequiredFields:"Lütfen tüm zorunlu alanları doldurun",passwordsDoNotMatch:"Parolalar eşleşmiyor",passwordTooShort:"Parola en az 8 karakter olmalı",passwordNeedsUppercase:"Parola en az bir büyük harf içermeli",passwordNeedsLowercase:"Parola en az bir küçük harf içermeli",passwordNeedsDigit:"Parola en az bir rakam içermeli",passwordNeedsSpecial:"Parola en az bir özel karakter içermeli",enterGroupName:"Lütfen bir grup adı girin",settingsSaved:"Ayarlar kaydedildi",noPermissionUpdate:"Ayarları değiştirme izniniz yok",cameraSettingsSaved:"Kamera ayarları kaydedildi",enterCameraUrl:"Lütfen bir kamera URL'si girin",passwordChanged:"Parola başarıyla değiştirildi",connectionFailed:"Bağlantı başarısız",testFailed:"Test başarısız",cameraConnected:"Kamera bağlandı{{resolution}}"},testConnection:"Bağlantıyı Test Et",catalog:{spoolCatalog:"Makara Kataloğu",spoolCatalogDescription:"Marka/türe göre boş makara ağırlıkları. Makara eklerken otomatik ağırlık araması için kullanılır.",searchCatalog:"Katalogda ara...",addNewEntry:"Yeni Giriş Ekle",namePlaceholder:"Ad (örn., Bambu Lab - Plastik)",weight:"Ağırlık",type:"Tür",default:"Varsayılan",custom:"Özel",noMatch:"Aramanızla eşleşen giriş yok",empty:"Katalogda giriş yok",deleteEntry:"Girişi Sil",deleteConfirm:'"{{name}}" silmek istediğinizden emin misiniz?',resetCatalog:"Kataloğu Sıfırla",resetConfirm:"Katalog varsayılana sıfırlansın mı? Bu, tüm özel girişleri kaldıracak.",loadFailed:"Makara kataloğu yüklenemedi",nameWeightRequired:"Ad ve ağırlık gereklidir",entryAdded:"Giriş eklendi",addFailed:"Giriş eklenemedi",entryUpdated:"Giriş güncellendi",updateFailed:"Giriş güncellenemedi",entryDeleted:"Giriş silindi",deleteFailed:"Giriş silinemedi",resetSuccess:"Katalog varsayılana sıfırlandı",resetFailed:"Katalog sıfırlanamadı",exported:"{{count}} giriş dışa aktarıldı",imported:"{{added}} giriş içe aktarıldı ({{skipped}} atlandı)",importFailed:"İçe aktarma başarısız: geçersiz JSON formatı",exportTooltip:"Kataloğu JSON'a dışa aktar",importTooltip:"Kataloğu JSON'dan içe aktar",resetTooltip:"Varsayılana sıfırla",selectedCount:"{{count}} seçildi",deleteSelected:"Seçilenleri Sil",bulkDeleteConfirm:"{{count}} girişi silmek istediğinizden emin misiniz?",bulkDeleted:"{{count}} giriş silindi",bulkDeleteFailed:"Girişler silinemedi",material:"Malzeme",spoolWeight:"Makara Ağırlığı",color:"Renk",updateSpoolWeight:"Makara Ağırlığını Güncelle",filamentUpdated:"Filament güncellendi",filamentUpdateFailed:"Filament güncellenemedi",filamentUpdateInvalid:"Geçersiz filament verisi",keepExistingSpoolWeight:"Mevcut makaralar için eski ağırlığı koru",keepExistingSpoolWeightDesc:"Bu filament türüyle önceden oluşturulmuş makaralar eski boş ağırlığı korur. Yeni makaralar güncellenmiş değeri kullanır.",applyToAllSpools:"Tüm makaralara uygula",applyToAllSpoolsDesc:"Bu filament türü için tüm ağırlık hesaplamaları hemen yeni boş ağırlığı kullanır."},colorCatalog:{title:"Renk Kataloğu",description:"Üreticiye/malzemeye göre filament renkleri. Makara eklerken otomatik renk araması için kullanılır.",searchColors:"Renklerde ara...",allManufacturers:"Tüm üreticiler",addNewColor:"Yeni Renk Ekle",manufacturer:"Üretici",colorName:"Renk Adı",hex:"Hex",materialOptional:"Malzeme (isteğe bağlı)",showing:"{{total}} renkten {{filtered}} tanesi gösteriliyor",noMatch:"Aramanızla eşleşen renk yok",empty:"Katalogda renk yok",deleteColor:"Rengi Sil",deleteConfirm:'"{{name}}" silmek istediğinizden emin misiniz?',resetCatalog:"Renk Kataloğunu Sıfırla",resetConfirm:"Katalog varsayılana sıfırlansın mı? Bu, tüm özel renkleri kaldıracak.",sync:"Senkronize Et",starting:"Başlatılıyor...",syncTooltip:"FilamentColors.xyz'den senkronize et (2000+ renk, bir dakika sürebilir)",loadFailed:"Renk kataloğu yüklenemedi",fieldsRequired:"Üretici, renk adı ve hex renk gereklidir",colorAdded:"Renk eklendi",addFailed:"Renk eklenemedi",colorUpdated:"Renk güncellendi",updateFailed:"Renk güncellenemedi",colorDeleted:"Renk silindi",deleteFailed:"Renk silinemedi",resetSuccess:"Renk kataloğu varsayılana sıfırlandı",resetFailed:"Katalog sıfırlanamadı",syncUpToDate:"Zaten güncel ({{count}} renk kontrol edildi)",syncComplete:"{{added}} yeni renk eklendi ({{skipped}} zaten mevcuttu)",syncError:"Senkronizasyon hatası",syncFailed:"FilamentColors.xyz'den senkronize edilemedi",exported:"{{count}} renk dışa aktarıldı",imported:"{{added}} renk içe aktarıldı ({{skipped}} atlandı)",importFailed:"İçe aktarma başarısız: geçersiz JSON formatı",selectedCount:"{{count}} seçildi",deleteSelected:"Seçilenleri Sil",bulkDeleteConfirm:"{{count}} rengi silmek istediğinizden emin misiniz?",bulkDeleted:"{{count}} renk silindi",bulkDeleteFailed:"Renkler silinemedi"},dateFormat:"Tarih Formatı",dateFormatUs:"ABD (AA/GG/YYYY)",dateFormatEu:"AB (GG/AA/YYYY)",dateFormatIso:"ISO (YYYY-AA-GG)",timeFormat:"Saat Formatı",timeFormat12:"12 saat (3:30 PM)",timeFormat24:"24 saat (15:30)",defaultPrinter:"Varsayılan Yazıcı",defaultPrinterDescription:"Yüklemeler, tekrar baskılar ve diğer işlemler için bu yazıcıyı önceden seç.",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"Yeniden sıralamak için kenar çubuğundaki öğeleri sürükleyin. Varsayılan sıraya buradan sıfırlayın.",setDefault:"Varsayılan Yap",sidebarOrderSetDefaultHint:"Varsayılan ayarla, mevcut menü sırasını henüz özelleştirmemiş kullanıcılara uygular.",sidebarDefaultSet:"Varsayılan menü sırası ayarlandı.",sidebarDefaultCleared:"Varsayılan menü sırası temizlendi.",sidebarDefaultFailed:"Varsayılan menü sırası ayarlanamadı.",reset:"Sıfırla",darkMode:"Koyu Mod",lightMode:"Açık Mod",active:"(aktif)",background:"Arka Plan",accent:"Vurgu",style:"Stil",bgNeutral:"Nötr",bgWarm:"Sıcak",bgCool:"Soğuk",bgOled:"OLED Siyah",bgSlate:"Arduvaz Mavisi",bgForest:"Orman Yeşili",accentGreen:"Yeşil",accentTeal:"Camgöbeği",accentBlue:"Mavi",accentOrange:"Turuncu",accentPurple:"Mor",accentRed:"Kırmızı",styleClassic:"Klasik",styleGlow:"Parıltı",styleVibrant:"Canlı",themeToggleHint:"Kenar çubuğundaki güneş/ay simgesini kullanarak koyu ve açık mod arasında geçiş yapın.",autoArchivePrints:"Baskıları otomatik arşivle",autoArchiveDescription:"Baskılar tamamlandığında 3MF dosyalarını otomatik olarak kaydet",saveThumbnailsDescription:"3MF dosyalarından önizleme görüntülerini çıkar ve kaydet",captureFinishPhotoDescription:"Baskı tamamlandığında yazıcı kamerasından bir fotoğraf çek",ffmpegNotInstalled:"ffmpeg yüklü değil",ffmpegRequired:"Kamera yakalama ffmpeg gerektirir. <brew>brew install ffmpeg</brew> (macOS) veya <apt>apt install ffmpeg</apt> (Linux) ile yükleyin.",camera:"Kamera",cameraViewMode:"Kamera Görüntüleme Modu",cameraOverlayDescription:"Kamera ana ekranda yeniden boyutlandırılabilir bir bindirmede açılır",cameraWindowDescription:"Kamera ayrı bir tarayıcı penceresinde açılır",externalCamerasDescription:"Yerleşik yazıcı kamerasını değiştirmek için harici kameraları yapılandırın. MJPEG akışlarını, RTSP, HTTP anlık görüntüleri ve USB kameralarını (V4L2) destekler. Etkinleştirildiğinde, harici kamera canlı görüntüleme ve bitiş fotoğrafları için kullanılır.",cameraPlaceholderUsb:"Cihaz yolu (/dev/video0)",cameraPlaceholderUrl:"Kamera URL'si (rtsp://... veya http://...)",cameraTypeMjpeg:"MJPEG Akışı",cameraTypeRtsp:"RTSP Akışı",cameraTypeSnapshot:"HTTP Anlık Görüntü",cameraTypeUsb:"USB Kamera (V4L2)",cameraSnapshotUrl:"Anlık Görüntü URL (isteğe bağlı)",cameraSnapshotUrlPlaceholder:"http://192.168.1.61:1984/api/frame.jpeg?src=printer",cameraSnapshotUrlHelp:"Bildirim küçük resimleri, bitiş fotoğrafları, katman zaman atlamalı kareler ve plaka algılama için kullanılan tek kare URL'si. Zaman atlamalı video ve plaka algılama, her birinin kendi yazıcı başına anahtarı gerektirir — bu URL yalnızca aktif olduklarında çektikleri görüntü kaynağıdır. Yukarıdaki canlı akıştan yakalamak için boş bırakın. go2rtc (/api/frame.jpeg) ve özel anlık görüntü uç noktasına sahip IP kameraları için kullanışlıdır.",cameraRotation:"Döndürme",test:"Test",connected:"Bağlı",disconnected:"Bağlı değil",currency:"Para Birimi",defaultFilamentCost:"Varsayılan filament maliyeti (kg başına)",electricityCost:"kWh başına elektrik maliyeti",energyDisplayMode:"Enerji görüntüleme modu",energyModePrintDescription:"Gösterge paneli, baskılar sırasında kullanılan enerji toplamını gösterir",energyModeTotalDescription:"Gösterge paneli, akıllı prizlerden ömür boyu enerjiyi gösterir",fileManager:"Dosya Yöneticisi",createArchiveEntry:"Yazdırırken Arşiv Girişi Oluştur",createArchiveEntryDescription:"Dosya Yöneticisinden yazdırırken isteğe bağlı olarak bir arşiv girişi oluştur",lowDiskSpaceWarning:"Düşük Disk Alanı Uyarısı",lowDiskSpaceDescription:"Boş disk alanı bu eşiğin altına düştüğünde uyarı göster",printerFirmware:"Yazıcı Firmware",checkFirmwareDescription:"Bambu Lab'dan yazıcı firmware güncellemelerini kontrol et",bambuddySoftware:"Bambuddy Yazılımı",autoCheckDescription:"Başlangıçta otomatik olarak yeni sürümleri kontrol et",checkNow:"Şimdi kontrol et",updateAvailableVersion:"Güncelleme mevcut: v{{version}}",releaseNotes:"Sürüm Notları",updateViaDocker:"Docker Compose ile güncelle:",updateViaHomeAssistant:"Güncellemeler Home Assistant Supervisor tarafından yönetilir. Yeni sürümü yüklemek için Home Assistant'ta Ayarlar → Eklentiler → Bambuddy'ye gidin.",installUpdate:"Güncellemeyi Yükle",latestVersionRunning:"En son sürümü çalıştırıyorsunuz",failedToCheckUpdates:"Güncellemeler kontrol edilemedi: {{error}}",backupRestore:"Yedekleme ve Geri Yükleme",backupRestoreDescription:"Ayarları dışa/içe aktar ve GitHub yedeklemesini yapılandır",goToBackup:"Yedeklemeye Git",externalUrl:"Harici URL",externalUrlDescription:"Bambuddy'nin erişilebildiği harici URL. Bildirim görüntüleri ve harici entegrasyonlar için kullanılır.",bambuddyUrl:"Bambuddy URL",externalUrlHint:"Protokol ve port dahil edin (örn., http://192.168.1.100:8000)",ftpRetry:"FTP Yeniden Dene",ftpRetryDescription:"Yazıcı WiFi güvenilmez olduğunda FTP işlemlerini yeniden dene. 3MF indirmelerine, baskı yüklemelerine, zaman atlamalı video indirmelerine ve firmware güncellemelerine uygulanır.",autoRetryDescription:"Başarısız FTP işlemlerini otomatik olarak yeniden dene",retryAttempts:"Yeniden deneme sayısı",retryDelay:"Yeniden deneme gecikmesi",connectionTimeout:"Bağlantı zaman aşımı",time_one:"{{count}} kez",time_other:"{{count}} kez",second_one:"{{count}} saniye",second_other:"{{count}} saniye",nSeconds:"{{count}} saniye",increaseForWeakWifi:"Zayıf WiFi'li yazıcılar için artırın",homeAssistant:"Home Assistant",homeAssistantFullDescription:"HA'nın REST API'si üzerinden akıllı prizleri kontrol etmek için Home Assistant'a bağlanın. switch, light, input_boolean ve script varlıklarını destekler.",homeAssistantUrl:"Home Assistant URL",longLivedAccessToken:"Uzun Ömürlü Erişim Belirteci",haTokenHint:"HA'da belirteç oluşturun: Profil → Uzun Ömürlü Erişim Belirteçleri → Belirteç Oluştur",connectionSuccessful:"Bağlantı Başarılı",connectionFailed:"Bağlantı Başarısız",haConnectionSuccess:"Home Assistant'a başarıyla bağlanıldı.",haConnectionFailed:"Home Assistant'a bağlanılamadı.",mqttPublishing:"MQTT Yayınlama",mqttDescription:"Node-RED, Home Assistant ve diğer otomasyon sistemleriyle entegrasyon için BamBuddy olaylarını harici bir MQTT brokerına yayınla.",mqttEnableDescription:"Olayları harici MQTT brokerına yayınla",brokerHostname:"Broker ana bilgisayar adı",port:"Port",usernameOptional:"Kullanıcı adı (isteğe bağlı)",passwordOptional:"Parola (isteğe bağlı)",topicPrefix:"Konu öneki",topicPrefixHint:"Konular: {{prefix}}/printers/<serial>/status, vb. olacak",prometheusMetrics:"Prometheus Metrikleri",prometheusEndpointDescription:"Prometheus/Grafana izleme için yazıcı metriklerini <code>/api/v1/metrics</code> adresinde sun.",bearerTokenOptional:"Bearer Belirteci (isteğe bağlı)",bearerTokenHint:"Ayarlandıysa, isteklerin <code>Authorization: Bearer <token></code> içermesi gerekir",metricsConnectionStatus:"Bağlantı durumu",metricsPrinterState:"Yazıcı durumu (boşta/yazdırılıyor/vb.)",metricsPrintProgress:"Baskı ilerlemesi 0-100%",metricsBedTemp:"Tabla sıcaklığı",metricsNozzleTemp:"Nozul sıcaklığı",metricsPrintsTotal:"Sonuca göre toplam baskılar",metricsMore:"...ve daha fazlası (katmanlar, fanlar, kuyruk, filament kullanımı)",smartPlugsDescription:"Güç kontrolünü otomatikleştirmek ve yazıcılarınız için enerji kullanımını takip etmek üzere akıllı prizleri (Tasmota veya Home Assistant) bağlayın.",allOn:"Tümü Açık",allOff:"Tümü Kapalı",addSmartPlug:"Akıllı Priz Ekle",energySummary:"Enerji Özeti",currentPower:"Mevcut Güç",plugsOnline:"{{reachable}}/{{total}} priz çevrimiçi",today:"Bugün",yesterday:"Dün",total:"Toplam",enablePlugsForSummary:"Enerji özetini görmek için prizleri etkinleştirin",addNotificationProvider:"Ekle",systemBadge:"(Sistem)",creating:"Oluşturuluyor...",changing:"Değiştiriliyor...",deleteUserAndItems:"Kullanıcıyı VE öğelerini sil",deleteUserKeepItems:"Kullanıcıyı sil, öğeleri tut (sahipsiz olur)",ok:"Tamam",twoFa:{totpTitle:"Doğrulayıcı Uygulama (TOTP)",totpDesc:"Google Authenticator, Aegis veya Authy gibi bir doğrulayıcı uygulama kullanın.",emailOtpTitle:"E-posta OTP",emailOtpDesc:"Giriş yaptığınızda {{email}} adresine tek seferlik bir kod gönder.",emailOtpNoEmail:"Bu yöntemi etkinleştirmek için hesabınıza bir e-posta adresi ekleyin.",addEmailFirst:"Hesabınızın e-posta adresi yok. E-posta OTP'yi etkinleştirmeden önce bir yöneticiden eklemesini isteyin.",setupTotp:"Doğrulayıcı Uygulamayı Ayarla",setupAuthApp:"Doğrulayıcı Uygulamayı Ayarla",setupInstructions:"Aşağıdaki QR kodunu doğrulayıcı uygulamanızla tarayın, ardından bir kodla onaylayın.",manualEntry:"Tarayamıyor musunuz? Bu gizli anahtarı manuel olarak girin:",scannedContinue:"Kodu taradım — devam et",enterCodeToConfirm:"Kurulumu onaylamak için doğrulayıcı uygulamanızdan 6 haneli kodu girin.",activate:"Etkinleştir",disableTotp:"Doğrulayıcıyı Devre Dışı Bırak",disableConfirmHint:"Doğrulayıcıyı devre dışı bırakmak için geçerli bir TOTP kodu veya yedek kod girin.",totpDisabled:"Doğrulayıcı uygulama devre dışı bırakıldı.",emailOtpEnabled:"E-posta OTP etkinleştirildi.",emailOtpDisabled:"E-posta OTP devre dışı bırakıldı.",smtpRequired:"Lütfen önce SMTP ayarlarını yapılandırın ve test edin.",invalidCode:"Geçersiz kod. Lütfen tekrar deneyin.",enableEmailOtp:"E-posta OTP'yi Etkinleştir",disableEmailOtp:"E-posta OTP'yi Devre Dışı Bırak",emailSetupEnterCode:"E-posta adresinize bir doğrulama kodu gönderildi. Bu kutunun sahibi olduğunuzu onaylamak için aşağıya girin.",verifyAndEnable:"Doğrula ve Etkinleştir",emailDisablePasswordHint:"E-posta OTP'yi devre dışı bırakmayı onaylamak için hesap parolanızı girin.",passwordPlaceholder:"Parolanızı girin",backupCodesTitle:"Yedek kodlarınızı kaydedin",backupCodesWarning:"Bu kodları güvenli bir yere kaydedin. Her kod yalnızca bir kez kullanılabilir ve tekrar gösterilmeyecektir.",backupCodesRemaining:"{{count}} yedek kod kaldı",savedCodes:"Kodlarımı kaydettim",regenBackup:"Yedek Kodları Yeniden Oluştur",regenBackupHint:"10 yeni yedek kod oluşturmak için mevcut TOTP kodunuzu girin. Mevcut tüm yedek kodlar geçersiz kılınacak.",newBackupCodes:"Yeni yedek kodlar",linkedAccounts:"Bağlı SSO Hesapları",linkedAccountsDesc:"Bu harici kimlik sağlayıcıları hesabınıza bağlıdır.",oidcUnlinked:"Hesap bağlantısı kaldırıldı."},oidc:{title:"SSO / OIDC Sağlayıcıları",desc:"Harici kimlik sağlayıcılar aracılığıyla tek oturum açmaya izin vermek için OpenID Connect sağlayıcılarını yapılandırın.",addProvider:"Sağlayıcı Ekle",newProvider:"Yeni Sağlayıcı",empty:"Henüz yapılandırılmış OIDC sağlayıcısı yok.",created:"Sağlayıcı oluşturuldu.",updated:"Sağlayıcı güncellendi.",deleted:"Sağlayıcı silindi.",refreshIcon:"Simgeyi yenile",removeIcon:"Simgeyi kaldır",iconRefreshed:"Simge yenilendi.",iconRemoved:"Simge kaldırıldı.",iconFetchFailed:"Simge sağlayıcı URL'sinden alınamadı.",deleteTitle:"Sağlayıcıyı Sil",deleteMessage:'"{{name}}" silinsin mi? Tüm bağlı kullanıcı hesaplarının bağlantısı kaldırılacak.',form:{name:"Görünen Ad",issuerUrl:"Yayıncı URL",clientId:"İstemci Kimliği",clientSecret:"İstemci Gizli Anahtarı",scopes:"Kapsamlar",iconUrl:"Simge URL (isteğe bağlı)",enabled:"Etkin",autoCreate:"Kullanıcıları otomatik oluştur",autoCreateDesc:"İlk girişte otomatik olarak yerel bir hesap oluştur.",autoLink:"Mevcut hesapları otomatik bağla",autoLinkDesc:"İlk girişte mevcut yerel hesapları e-posta eşleştirerek bağla.",secretHint:"mevcut olanı korumak için boş bırakın",secretPlaceholder:"yeni gizli anahtar",emailClaim:"E-posta İddiası",emailClaimDesc:"E-posta kimliği olarak kullanılan JWT iddiası. Azure Entra ID için 'preferred_username' veya 'upn' kullanın (email_verified göndermez). Yalnızca güvenilir iddia adlarını kullanın.",emailClaimPlaceholder:"email",emailClaimCustomClaimAutoLinkWarning:"Özel iddialar yalnızca değer kiracı tarafından yönetildiğinde otomatik bağlantı için güvenlidir (örn. Azure Entra ID upn / preferred_username). Kimlik sağlayıcınız kullanıcıların bu iddiayı kendi kendine onaylamasına izin veriyorsa otomatik bağlantıyı etkinleştirmeyin.",requireEmailVerified:"E-posta doğrulamasını gerektir",requireEmailVerifiedDesc:"E-posta iddiasını yalnızca sağlayıcı doğrulanmış olarak işaretlediğinde kabul et.",requireEmailVerifiedWarning:"Uyarı: e-posta doğrulama olmadan bile kabul edilecek. Yalnızca güvenilir sağlayıcılarla kullanın.",requireEmailVerifiedAutoLink:"Bu ayarı değiştirmek için önce otomatik bağlantıyı devre dışı bırakın.",defaultGroup:"Varsayılan Grup",defaultGroupDesc:"Otomatik oluşturulan kullanıcılara atanan grup. Ayarlanmazsa Viewers'a geri döner.",defaultGroupViewersFallback:"Viewers (varsayılan)"}},encryption:{title:"MFA Şifreleme Durumu",enabledFromEnv:"Sabit şifreleme etkin (anahtar MFA_ENCRYPTION_KEY ortam değişkeninden)",enabledFromFile:"Sabit şifreleme etkin (anahtar veri dizininden yüklendi)",enabledGenerated:"Sabit şifreleme otomatik oluşturulan anahtarla etkin",notConfigured:"Sabit şifreleme yapılandırılmamış",notConfiguredDesc:"TOTP gizli anahtarları ve OIDC client_secrets düz metin olarak saklanır. MFA_ENCRYPTION_KEY ayarlayın veya Bambuddy'yi otomatik olarak oluşturmak için yazılabilir bir veri dizini ile yeniden başlatın.",allEncrypted:"Tüm MFA gizli anahtarları sabit olarak şifrelenmiş durumda.",legacyRowsLabel:"Eski düz metin satırlar",encryptedRowsLabel:"Şifrelenmiş satırlar",legacyRowsWarning:"{{count}} eski düz metin satır algılandı. Şifrelenmiş depolamaya geçmek için OIDC sağlayıcısını yeniden kaydedin veya kullanıcının doğrulayıcı uygulamasını yeniden kaydedin.",backupHint:"Otomatik oluşturulan anahtar DATA_DIR/.mfa_encryption_key konumunda saklanır ve yerel yedek ZIP'lere dahil edilir. Yedeklerinizi güvende tutun veya MFA_ENCRYPTION_KEY'i açıkça ayarlayın.",decryptionBrokenTitle:"Şifreleme anahtarı eksik",decryptionBrokenError:"Şifreleme anahtarı artık mevcut olmadığından {{count}} şifrelenmiş kayıt şifresi çözülemiyor. Kurtarmak için önceki MFA_ENCRYPTION_KEY veya DATA_DIR/.mfa_encryption_key'i geri yükleyin.",migrationErrorWarning:"Başlangıçta {{count}} eski satır yeniden şifrelenemedi. Sunucu günlüklerini kontrol edin ve yeniden denemek için Bambuddy'yi yeniden başlatın."}},notification:{printStarted:{title:"Baskı Başladı",body:"{{printer}}: {{filename}} yazdırmaya başladı"},printCompleted:{title:"Baskı Tamamlandı",body:"{{printer}}: {{filename}} başarıyla tamamlandı"},printFailed:{title:"Baskı Başarısız",body:"{{printer}}: {{filename}} başarısız oldu"},printStopped:{title:"Baskı Durduruldu",body:"{{printer}}: {{filename}} durduruldu"},printProgress:{title:"Baskı İlerlemesi",body:"{{printer}}: {{filename}} %{{percent}} tamamlandı"},printerOffline:{title:"Yazıcı Çevrimdışı",body:"{{printer}} çevrimdışı"},printerError:{title:"Yazıcı Hatası",body:"{{printer}}: {{error}}"},filamentLow:{title:"Az Filament",body:"{{printer}}: Filament azalıyor"},maintenanceDue:{title:"Bakım Zamanı",body:"{{printer}}: {{items}} dikkat gerektiriyor"}},errors:{generic:"Bir şeyler ters gitti",networkError:"Ağ hatası. Lütfen bağlantınızı kontrol edin.",notFound:"Bulunamadı",unauthorized:"Yetkisiz",serverError:"Sunucu hatası",validationError:"Lütfen girdinizi kontrol edin",printerConnectionFailed:"Yazıcıya bağlanılamadı",saveFailed:"Değişiklikler kaydedilemedi",deleteFailed:"Silme başarısız",loadFailed:"Veri yüklenemedi"},hmsErrors:{title:"Hatalar - {{name}}",noErrors:"Hata yok",viewOnWiki:"Bambu Lab Wiki'de görüntüle",clearInstructions:"Buradan kapatmak için yazıcıdaki hataları temizleyin.",clearErrors:"Hataları Temizle",clearSuccess:"HMS hataları temizlendi",clearFailed:"HMS hataları temizlenemedi"},mqttDebug:{title:"MQTT Hata Ayıklama Günlüğü",searchPlaceholder:"Konu veya yük ara...",noMessages:"Henüz mesaj kaydedilmedi",startLoggingHint:'MQTT mesajlarını yakalamaya başlamak için "Kaydetmeye Başla"ya tıklayın',noMessagesMatch:"Filtrenizle eşleşen mesaj yok",adjustFilterHint:"Arama veya filtre kriterlerinizi ayarlamayı deneyin",incoming:"Gelen",outgoing:"Giden",loggingStopped:"Kaydetme durduruldu",loggingActive:"Kaydetme aktif - mesajlar otomatik olarak yenilenecek",startLogging:"Kaydetmeye Başla",stopLogging:"Kaydetmeyi Durdur",clearLog:"Günlüğü Temizle",topic:"Konu",timestamp:"Zaman damgası",direction:"Yön",all:"Tümü"},printerFiles:{title:"Dosya Yöneticisi",storageUsed:"Kullanılan:",storageFree:"Boş:",filterPlaceholder:"Dosyaları filtrele...",deleteButton:"Sil",deleteFiles:"{{count}} Dosya Sil",deleteFileConfirm:'"{{name}}" silinsin mi? Bu geri alınamaz.',deleteFilesConfirm:"Seçilen {{count}} dosya silinsin mi? Bu geri alınamaz.",noFiles:"Yazıcıda dosya yok",loadingFiles:"Dosyalar yükleniyor...",failedToLoad:"Dosyalar yüklenemedi",toast:{filesDeleted:"{{count}} dosya silindi",deleteFailed:"Silme başarısız: {{error}}"}},confirm:{delete:"Bunu silmek istediğinizden emin misiniz?",unsavedChanges:"Kaydedilmemiş değişiklikleriniz var. Çıkmak istediğinizden emin misiniz?",clearQueue:"Kuyruğu temizlemek istediğinizden emin misiniz?"},login:{title:"Bambuddy Giriş",subtitle:"Hesabınıza giriş yapın",username:"Kullanıcı Adı",usernamePlaceholder:"Kullanıcı adınızı girin",usernameOrEmail:"Kullanıcı Adı veya E-posta",usernameOrEmailPlaceholder:"Kullanıcı adı veya @ E-posta",password:"Parola",passwordPlaceholder:"Parolanızı girin",signIn:"Giriş yap",signingIn:"Giriş yapılıyor...",rememberMe:"Beni Hatırla",forgotPassword:"Parolanızı mı unuttunuz?",loginSuccess:"Başarıyla giriş yapıldı",loginFailed:"Giriş başarısız",enterCredentials:"Lütfen kullanıcı adı ve parola girin",enterEmail:"Lütfen e-posta adresinizi girin",oidcLoginFailed:"OIDC girişi başarısız",oidcErrors:{providerError:"Kimlik sağlayıcısı bir hata döndürdü",missingParameters:"OIDC geri arama gerekli parametreleri eksik",invalidState:"OIDC durumu geçersiz veya zaten kullanılmış",stateExpired:"OIDC giriş oturumu süresi doldu — lütfen tekrar deneyin",providerNotFound:"OIDC sağlayıcısı bulunamadı",discoveryFailed:"OIDC keşif belgesi alınamadı",invalidDiscovery:"OIDC keşif belgesi geçersiz",networkError:"OIDC belirteç değişimi sırasında ağ hatası",badResponse:"OIDC belirteç değişimi sırasında beklenmeyen yanıt",noIdToken:"OIDC sağlayıcısı bir ID belirteci döndürmedi",validationFailed:"OIDC belirteç doğrulaması başarısız",nonceMismatch:"OIDC nonce uyuşmazlığı — olası tekrar saldırısı",missingSubClaim:"OIDC belirteci sub iddiasını içermiyor",noLinkedAccount:"Bu OIDC kimliğine bağlı yerel hesap yok",accountInactive:"Hesabınız aktif değil",userResolutionFailed:"Hesabınız çözümlenemedi",internalError:"OIDC girişi sırasında dahili bir hata oluştu",tokenExchangeFailed:"OIDC belirteç değişimi başarısız"},forgotPasswordTitle:"Parolayı Unuttum",forgotPasswordMessage:"Parolanızı unuttuysanız, sıfırlamak için lütfen sistem yöneticinizle iletişime geçin.",forgotPasswordEmailMessage:"E-posta adresinizi girin, size yeni bir parola göndereceğiz.",emailAddress:"E-posta Adresi",emailPlaceholder:"eposta.adresi@example.com",cancel:"İptal",sending:"Gönderiliyor...",sendResetEmail:"Sıfırlama E-postası Gönder",howToReset:"Parolanızı nasıl sıfırlarsınız:",resetStep1:"Bambuddy yöneticinizle iletişime geçin",resetStep2:"Kullanıcı Yönetiminde parolanızı sıfırlamasını isteyin",resetStep3:"Sizin için yeni bir geçici parola belirleyebilirler",resetStep4:"Yeni parolayla giriş yapın ve Ayarlarda değiştirin",gotIt:"Anladım",resetPassword:{title:"Yeni Parola Belirle",subtitle:"Aşağıya yeni parolanızı girin ve onaylayın.",newPassword:"Yeni Parola",newPasswordPlaceholder:"En az 8 karakter",confirmPassword:"Parolayı Onayla",confirmPasswordPlaceholder:"Yeni parolayı tekrarlayın",saving:"Kaydediliyor…",submit:"Yeni Parola Belirle",backToLogin:"Girişe dön",passwordsDoNotMatch:"Parolalar eşleşmiyor",passwordTooShort:"Parola en az 8 karakter olmalı",resetFailed:"Parola sıfırlama başarısız. Bağlantının süresi dolmuş olabilir."},twoFA:{title:"İki Faktörlü Kimlik Doğrulama",subtitle:"Hesabınız 2FA ile korunuyor. Aşağıya doğrulama kodunu girin.",methodAuthenticator:"Doğrulayıcı Uygulama",methodEmail:"E-posta Kodu",methodBackup:"Yedek Kod",instructionsTotp:"Doğrulayıcı uygulamanızı açın ve Bambuddy için 6 haneli kodu girin.",instructionsEmail:"E-posta adresinize 6 haneli bir kod gönderildi. 10 dakika içinde sona erer.",instructionsEmailNotSent:"E-posta yoluyla bir doğrulama kodu almak için aşağıdaki düğmeye tıklayın.",instructionsBackup:"8 karakterlik yedek kurtarma kodlarınızdan birini girin. Her kod yalnızca bir kez kullanılabilir.",sendCodeButton:"E-posta ile Kod Gönder",sendingCode:"Gönderiliyor...",resendCode:"Kodu yeniden gönder",codeLabel:"Doğrulama Kodu",backupCodeLabel:"Yedek Kod",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"Doğrula",verifyingButton:"Doğrulanıyor...",backToLogin:"← Girişe dön",orContinueWith:"veya şununla devam edin",signInWith:"{{provider}} ile giriş yap",enterCode:"Lütfen doğrulama kodunu girin",sendCodeFailed:"Doğrulama kodu gönderilemedi",invalidCode:"Geçersiz kod. Lütfen tekrar deneyin."}},setup:{title:"Bambuddy Kurulumu",subtitle:"Bambuddy örneğiniz için kimlik doğrulamayı yapılandırın",enableAuth:"Kimlik Doğrulamayı Etkinleştir",adminAccount:"Yönetici Hesabı",adminAccountDesc:"Yönetici kullanıcılar zaten varsa, kimlik doğrulama mevcut yönetici hesapları kullanılarak etkinleştirilecek. Mevcut yöneticileri kullanmak için aşağıdaki alanları boş bırakın veya yeni bir yönetici kullanıcı oluşturmak için yeni kimlik bilgileri girin.",adminUsername:"Yönetici Kullanıcı Adı",adminPassword:"Yönetici Parolası",optionalIfAdminExists:"(yönetici kullanıcılar varsa isteğe bağlı)",adminUsernamePlaceholder:"Yönetici kullanıcı adı girin (isteğe bağlı)",adminPasswordPlaceholder:"Yönetici parolası girin (isteğe bağlı)",confirmPassword:"Parolayı Onayla",confirmPasswordPlaceholder:"Yönetici parolasını onayla",settingUp:"Kuruluyor...",completeSetup:"Kurulumu Tamamla",toast:{authEnabledAdminCreated:"Kimlik doğrulama etkinleştirildi ve yönetici kullanıcı oluşturuldu",authEnabledExistingAdmins:"Mevcut yönetici kullanıcılar kullanılarak kimlik doğrulama etkinleştirildi",setupCompleted:"Kurulum tamamlandı",enterBothCredentials:"Lütfen hem yönetici kullanıcı adı hem de parola girin veya mevcut yönetici kullanıcıları kullanmak için her ikisini de boş bırakın",passwordsDoNotMatch:"Parolalar eşleşmiyor",passwordTooShort:"Parola en az 6 karakter olmalı"}},changePassword:{title:"Parolayı Değiştir",currentPassword:"Mevcut Parola",currentPasswordPlaceholder:"Mevcut parolayı girin",newPassword:"Yeni Parola",newPasswordPlaceholder:"Yeni parolayı girin (en az 6 karakter)",confirmPassword:"Yeni Parolayı Onayla",confirmPasswordPlaceholder:"Yeni parolayı onayla",passwordsDoNotMatch:"Parolalar eşleşmiyor",passwordTooShort:"Parola en az 6 karakter olmalı",changing:"Değiştiriliyor...",success:"Parola başarıyla değiştirildi",failed:"Parola değiştirilemedi"},plateAlert:{title:"Baskı Duraklatıldı!",message:"Baskı plakasında nesneler algılandı. Baskı otomatik olarak duraklatıldı. Lütfen plakayı temizleyin ve baskıya devam edin.",understand:"Anladım"},camera:{title:"Kamera Görünümü",invalidPrinterId:"Geçersiz yazıcı ID'si",live:"Canlı",snapshot:"Anlık Görüntü",restartStream:"Akışı yeniden başlat",refreshSnapshot:"Anlık görüntüyü yenile",fullscreen:"Tam ekran",exitFullscreen:"Tam ekrandan çık",connectingToCamera:"Kameraya bağlanılıyor...",capturingSnapshot:"Anlık görüntü yakalanıyor...",connectionLost:"Bağlantı kesildi",connectionFailed:"Kamera bağlantısı başarısız",reconnecting:"{{countdown}}sn içinde yeniden bağlanılıyor... (deneme {{attempt}}/{{max}})",reconnectNow:"Şimdi yeniden bağlan",cameraUnavailable:"Kamera kullanılamıyor",cameraUnavailableDesc:"Yazıcının açık ve bağlı olduğundan emin olun.",noCamera:"Kamera yok",retry:"Yeniden dene",cameraStream:"Kamera akışı",zoomOut:"Uzaklaştır",zoomIn:"Yakınlaştır",resetZoom:"Yakınlaştırmayı sıfırla",recording:"Kaydediyor",startRecording:"Kaydı Başlat",stopRecording:"Kaydı Durdur",chamberLight:"Hazne ışığını aç/kapat",unavailable:"Kamera kullanılamıyor",diagnose:{button:"Tanıla",modalTitle:"Kamera tanılaması",running:"Tanılama çalışıyor...",runFailed:"Tanılama çalıştırılamadı: {{error}}",retry:"Tekrar çalıştır",stage:{tcp_reachable:"Ağ erişilebilirliği",first_frame:"Kare yakalama",live_stream_active:"Canlı akış aktif"},summary:{all_ok:"Kamera çalışıyor. Tanılama tüm aşamaları başarıyla tamamladı.",live_stream_active_healthy:"Kamera şu anda son karelerle akış yapıyor — teste gerek yok.",printer_unreachable:"Yazıcıya erişilemiyor. IP adresini, ağ bağlantısını ve yazıcının açık olduğunu kontrol edin.",camera_port_closed:"Yazıcıya erişilebilir ancak kamera portu kapalı. Yazıcı ayarlarında yalnızca LAN modunun ve Geliştirici Modunun etkin olduğundan emin olun.",no_frame:"Kameraya bağlanıldı ancak hiç kare alınmadı. Tekrar deneyin veya yazıcı ayarlarında kameranın etkin olduğunu kontrol edin.",unknown_failure:"Kamera tanılaması bilinmeyen bir nedenle başarısız oldu. Ayrıntılar için destek günlüğüne bakın."},meta:{protocol:"Protokol",port:"Port",profile:"Profil"}}},groups:{title:"Grup Yönetimi",subtitle:"Erişim kontrolü için izin gruplarını yönetin",backToSettings:"Ayarlara Dön",createGroup:"Grup Oluştur",noPermission:"Bu sayfaya erişim izniniz yok.",system:"Sistem",noDescription:"Açıklama yok",usersCount:"{{count}} kullanıcı",permissionsCount:"{{count}} izin",edit:"Düzenle",delete:"Sil",toast:{created:"Grup başarıyla oluşturuldu",updated:"Grup başarıyla güncellendi",deleted:"Grup başarıyla silindi",enterGroupName:"Lütfen bir grup adı girin"},modal:{editGroup:"Grubu Düzenle",createGroup:"Grup Oluştur",cancel:"İptal",saving:"Kaydediliyor...",creating:"Oluşturuluyor...",saveChanges:"Değişiklikleri Kaydet"},form:{groupName:"Grup Adı",groupNamePlaceholder:"Grup adını girin",systemGroupWarning:"Sistem grubu adları değiştirilemez",description:"Açıklama",descriptionPlaceholder:"Açıklama girin (isteğe bağlı)",permissions:"İzinler ({{count}} seçildi)"},deleteModal:{title:"Grubu Sil",message:"Bu grubu silmek istediğinizden emin misiniz? Bu gruptaki kullanıcılar bu izinleri kaybedecek.",confirm:"Grubu Sil"},editor:{title:"Grubu Düzenle",createTitle:"Grup Oluştur",search:"İzinlerde ara...",selectAll:"Tümünü Seç",clearAll:"Tümünü Temizle",permissionsSelected:"{{count}} seçildi",noResults:"Aramanızla eşleşen izin yok"}},users:{title:"Kullanıcı Yönetimi",subtitle:"Kullanıcıları ve Bambuddy örneğinize erişimlerini yönetin",backToSettings:"Ayarlara Dön",createUser:"Kullanıcı Oluştur",noPermission:"Bu sayfaya erişim izniniz yok.",admin:"Yönetici",noGroups:"Grup yok",active:"Aktif",inactive:"Pasif",edit:"Düzenle",delete:"Sil",system:"Sistem",noGroupsAvailable:"Kullanılabilir grup yok",table:{username:"Kullanıcı Adı",groups:"Gruplar",status:"Durum",actions:"İşlemler"},toast:{created:"Kullanıcı başarıyla oluşturuldu",updated:"Kullanıcı başarıyla güncellendi",deleted:"Kullanıcı başarıyla silindi",fillRequired:"Lütfen tüm zorunlu alanları doldurun",passwordsDoNotMatch:"Parolalar eşleşmiyor",passwordTooShort:"Parola en az 6 karakter olmalı",ldapProvisioned:'"{{username}}" LDAP kullanıcısı tedarik edildi'},modal:{createUser:"Kullanıcı Oluştur",editUser:"Kullanıcıyı Düzenle",cancel:"İptal",creating:"Oluşturuluyor...",saving:"Kaydediliyor...",saveChanges:"Değişiklikleri Kaydet",advancedAuthSubtitle:"Gelişmiş Kimlik Doğrulama ile",tabsAriaLabel:"Kullanıcı kaynağı",localTab:"Yerel",ldapTab:"LDAP",ldapSearchLabel:"Dizinde ara",ldapSearchPlaceholder:"Bir kullanıcı adı, isim veya e-posta yazın...",ldapMinChars:"Aramak için en az 2 karakter yazın",ldapTypeToSearch:"LDAP dizininde aramak için yazmaya başlayın",ldapSearching:"Dizinde aranıyor...",ldapNoResults:"Dizinde eşleşen kullanıcı yok",ldapSearchError:"Dizin araması başarısız. LDAP sunucu durumunu kontrol edin.",ldapAlreadyProvisioned:"Zaten tedarik edildi",ldapSelectedLabel:"Seçildi",ldapProvision:"Kullanıcıyı tedarik et",ldapProvisioning:"Tedarik ediliyor...",ldapErrorProvision:"Tedarik başarısız. LDAP sunucu durumunu kontrol edin ve tekrar deneyin."},form:{username:"Kullanıcı Adı",usernamePlaceholder:"Kullanıcı adını girin",email:"E-posta",emailPlaceholder:"kullanici@example.com",password:"Parola",passwordPlaceholder:"Parolayı girin",confirmPassword:"Parolayı Onayla",confirmPasswordPlaceholder:"Parolayı onayla",newPasswordPlaceholder:"Yeni parolayı girin",confirmNewPasswordPlaceholder:"Yeni parolayı onayla",leaveBlankToKeep:"mevcut olanı korumak için boş bırakın",groups:"Gruplar",optional:"isteğe bağlı",autoGeneratedPassword:"Güvenli bir parola otomatik olarak oluşturulacak ve kullanıcıya e-posta ile gönderilecek.",passwordManagedByAdvancedAuth:'Parola Gelişmiş Kimlik Doğrulama tarafından yönetilir. Kullanıcıya e-posta yoluyla yeni bir parola göndermek için "Parolayı Sıfırla"yı kullanın.',resetPassword:"Parolayı Sıfırla",resettingPassword:"Parola Sıfırlanıyor..."},deleteModal:{title:"Kullanıcıyı Sil",message:"Bu kullanıcıyı silmek istediğinizden emin misiniz? Bu işlem geri alınamaz.",confirm:"Kullanıcıyı Sil"}},streamOverlay:{title:"Akış Bindirmesi",invalidPrinterId:"Geçersiz yazıcı ID'si",cameraStream:"Kamera akışı",progress:"İlerleme",eta:"ETA",printerIdle:"Yazıcı boşta",printerOffline:"Yazıcı çevrimdışı",status:{printing:"Yazdırılıyor",paused:"Duraklatıldı",finished:"Tamamlandı",failed:"Başarısız",idle:"Boşta",unknown:"Bilinmiyor"}},profiles:{title:"Profiller",subtitle:"Dilimleyici ön ayarlarını ve basınç ilerleme kalibrasyonlarını yönetin",tabs:{bambuCloud:"Bambu Cloud",orcaCloud:"Orca Cloud",local:"Yerel Profiller",kprofiles:"K-Profilleri"},orcaCloud:{connectedAs:"Bağlı kullanıcı",logout:"Bağlantıyı kes",noLogoutPermission:"Bağlantıyı kesme izniniz yok",noConnectPermission:"Orca Cloud'a bağlanma izniniz yok",retry:"Yeniden dene",back:"Farklı bir giriş yöntemi kullan",connect:{title:"Orca Cloud'a bağlan",description:"Dilimleyici profillerinizi Bambuddy ile senkronize etmek için Orca Cloud hesabınıza giriş yapın."},providers:{google:"Google ile giriş yap",apple:"Apple ile giriş yap",github:"GitHub ile giriş yap",email:"E-posta ve şifre ile giriş yap"},password:{title:"E-posta ve şifre ile giriş yap",email:"E-posta",emailPlaceholder:"sen@ornek.com",password:"Şifre",submit:"Giriş yap"},paste:{title:"Girişi tamamla",step1:"Yeni bir sekme Orca Cloud giriş sayfasıyla açıldı. Orca hesabınızla giriş yapın.",step2:`Tarayıcınız yüklenemeyen bir "localhost" URL'sine yönlendirilecektir. Bu beklenen bir durumdur — bize gereken URL budur.`,step3:"Tarayıcınızın adres çubuğundaki URL'nin tamamını kopyalayın ve aşağıya yapıştırın.",signInUrl:"Giriş sekmesi açılmadıysa bu URL'ye tıklayın:",label:"Geri çağrı URL'sini buraya yapıştırın",placeholder:"http://localhost:41172/callback?code=...&state=...",submit:"Bağlantıyı tamamla"},profiles:{title:"Orca Cloud profilleriniz ({{count}})",refresh:"Yenile",empty:"Orca Cloud hesabınızda henüz profil bulunamadı."},toast:{connected:"{{email}} olarak Orca Cloud'a bağlanıldı",disconnected:"Orca Cloud bağlantısı kesildi"},errors:{startFailed:"Orca Cloud giriş akışı başlatılamadı.",finishFailed:"Orca Cloud girişi tamamlanamadı.",passwordFailed:"Bu e-posta ve şifreyle giriş yapılamadı.",passwordEmpty:"Lütfen hem e-postanızı hem de şifrenizi girin.",emptyPaste:"Lütfen tarayıcınızdan geri çağrı URL'sini yapıştırın.",noCode:"Bu URL bir Orca Cloud geri çağrısına benzemiyor (code parametresi yok). Tam URL'yi adres çubuğundan kopyalayın."}},localProfiles:{title:"Yerel Profiller",subtitle:"OrcaSlicer'dan dilimleyici ön ayarlarını içe aktar ve yönet",import:"Profilleri İçe Aktar",importDesc:".bbscfg, .bbsflmt, .orca_filament, .zip veya .json dosyalarını buraya bırakın",importing:"İçe aktarılıyor...",search:"Yerel ön ayarlarda ara...",noPresets:"Henüz yerel ön ayar yok",noSearchResults:"Aramanızla eşleşen ön ayar yok",badge:"Yerel",edit:"Düzenle",delete:"Sil",cancel:"İptal",deleteConfirmTitle:"Ön Ayarı Sil",deleteConfirm:"Bu ön ayarı silmek istediğinizden emin misiniz? Bu geri alınamaz.",source:"Kaynak",inheritsFrom:"Miras alır",filamentType:"Tür",vendor:"Satıcı",compatiblePrinters:"Yazıcılar",nozzleTemp:"Nozul Sıcaklığı",cost:"Maliyet",density:"Yoğunluk",pressureAdvance:"Basınç İlerlemesi",filament:"Filament",process:"İşlem",printer:"Yazıcı",toast:{importSuccess:"{{count}} ön ayar içe aktarıldı",importSkipped:"{{count}} ön ayar atlandı (yinelenenler)",importError:"İçe aktarma sırasında {{count}} hata",deleted:"Ön ayar silindi",updated:"Ön ayar güncellendi"}},connectedAs:"Bağlı kullanıcı",logout:"Çıkış",noLogoutPermission:"Çıkış yapma izniniz yok",failedToLoad:"Profiller yüklenemedi",retry:"Yeniden dene",time:{justNow:"Az önce",minsAgo:"{{count}}dk önce",hoursAgo:"{{count}}sa önce",daysAgo:"{{count}}g önce"},toast:{loggedOut:"Çıkış yapıldı"},login:{title:"Bambu Cloud'a Bağlan",subtitle:"Dilimleyici ön ayarlarınızı cihazlar arasında senkronize edin",email:"E-posta",password:"Parola",region:"Bölge",regionGlobal:"Global",regionChina:"Çin",verificationCode:"Doğrulama Kodu",totpCode:"Doğrulayıcı Kodu",checkEmail:"E-postanızı ({{email}}) 6 haneli kod için kontrol edin",enterTotpHint:"Doğrulayıcı uygulamanızdan 6 haneli kodu girin",accessToken:"Erişim Belirteci",accessTokenHint:"Bambu Cloud erişim belirtecinizi yapıştırın. Çin bölgesi hesapları bu yolu kullanmalıdır (telefon bağımlı — e-posta girişi kullanılamaz). MakerWorld çerezlerinden belirteci nasıl alacağınız için wiki'ye bakın.",back:"Geri",loginButton:"Giriş",verifyButton:"Doğrula",setTokenButton:"Belirteç Ayarla",useToken:"Erişim belirteci kullan",useEmail:"E-posta ile giriş yap",toast:{loggedIn:"Başarıyla giriş yapıldı",codeSent:"Doğrulama kodu e-postanıza gönderildi",enterTotp:"Doğrulayıcı uygulamanızdan kod girin",tokenSet:"Belirteç başarıyla ayarlandı"}},presets:{myPreset:"Ön ayarım (düzenlenebilir)",duplicate:"Çoğalt",editable:"Düzenlenebilir",failedToLoadDetails:"Ön ayar ayrıntıları yüklenemedi",deleteConfirm:"Bu ön ayar silinsin mi?",deleteWarning:`Bu, "{{name}}" ön ayarını Bambu Cloud'dan kalıcı olarak silecek. Bu geri alınamaz.`,noDuplicatePermission:"Ön ayarları çoğaltma izniniz yok",noEditPermission:"Ön ayarları düzenleme izniniz yok",noDeletePermission:"Ön ayarları silme izniniz yok",types:{filament:"Filament ön ayarı",printer:"Yazıcı ön ayarı",process:"İşlem ön ayarı"},toast:{deleted:"Ön ayar silindi",created:"Ön ayar oluşturuldu",updated:"Ön ayar güncellendi",duplicated:"Ön ayar çoğaltıldı",fieldAdded:'"{{key}}" alanı eklendi',exported:"Ön ayar dışa aktarıldı"},baseLabel:"Taban: {{name}}",currentLabel:"Mevcut: {{name}}",newPreset:"Yeni Ön Ayar",editPreset:"Ön Ayarı Düzenle",duplicatePreset:"Ön Ayarı Çoğalt",createNewPreset:"Yeni Ön Ayar Oluştur",customizeSettings:"Yeni ön ayarınız için ayarları özelleştirin",compareWithBase:"Taban ön ayarla karşılaştır",compare:"Karşılaştır",basePreset:"Taban Ön Ayar",selectBasePreset:"Taban ön ayar seç...",presetName:"Ön Ayar Adı",myCustomPreset:"Özel ön ayarım",inheritsFrom:"Miras alır",dropJsonToImport:"İçe aktarmak için JSON bırakın",tabs:{common:"Ortak",allFields:"Tüm Alanlar"},availableFields:"Kullanılabilir Alanlar",searchFieldsPlaceholder:"Alanlarda ara...",noMatchingFields:"Eşleşen alan yok",allFieldsAdded:"Tüm alanlar eklendi",addCustomField:"Özel alan ekle",yourOverrides:"Geçersiz Kılmalarınız",noOverridesYet:"Henüz geçersiz kılma yok",clickFieldsToAdd:"Eklemek için soldaki alanlara tıklayın",saveAsTemplate:"Şablon olarak kaydet",jsonTip:"İpucu: Ayarları içe aktarmak için bu modalin herhangi bir yerine .json dosyasını sürükleyip bırakın"},cloudView:{searchPlaceholder:"Ön ayarlarda ara...",templates:"Şablonlar",refresh:"Yenile",newPreset:"Yeni Ön Ayar",clearFilters:"Filtreleri temizle",compareMode:"Karşılaştırma Modu",selectAnotherPreset:"Başka bir {{type}} ön ayarı seç",clickTwoPresets:"Karşılaştırmak için aynı türden iki ön ayara tıklayın",selectFirst:"1. İlkini seç",selectSecond:"2. İkincisini seç",compareNow:"Şimdi Karşılaştır",lastSynced:"Son senkronizasyon:",showingCount:"{{total}} ön ayardan {{showing}} tanesi gösteriliyor",noPresetsFound:"Ön ayar bulunamadı",columns:{filament:"Filament",process:"İşlem",printer:"Yazıcı"},noFilamentPresets:"Filament ön ayarı yok",noProcessPresets:"İşlem ön ayarı yok",noPrinterPresets:"Yazıcı ön ayarı yok",filters:{type:"Tür",owner:"Sahip",printer:"Yazıcı",nozzle:"Nozul",filament:"Filament",layer:"Katman",all:"Tümü",myPresets:"Ön Ayarlarım",builtIn:"Yerleşik",process:"İşlem"},noTemplatesPermission:"Şablonları yönetme izniniz yok",noRefreshPermission:"Profilleri yenileme izniniz yok",noCreatePermission:"Ön ayar oluşturma izniniz yok"},templates:{title:"Hızlı Şablonlar",noTemplates:"Henüz şablon yok",createFirst:"Ön ayar düzenleyicisinden şablonlar oluşturun",typeFilter:"Tür:",deleteTitle:"Şablonu Sil",deleteWarning:"Bu işlem geri alınamaz",deleteConfirm:'"{{name}}" silmek istediğinizden emin misiniz?',namePlaceholder:"Şablon adı",descriptionPlaceholder:"Açıklama",settingsJson:"Ayarlar (JSON)",fieldsCount:"{{count}} alan",shownInModals:"Modallerde gösterilir",hiddenInModals:"Modallerde gizli",apply:"Uygula",toast:{deleted:"Şablon silindi",updated:"Şablon güncellendi",created:"Şablon oluşturuldu",applied:"Şablon uygulandı"}}},support:{debugLoggingActive:"Hata ayıklama kaydı aktif",manageLogs:"Yönet",collectItem7:"Yazıcı bağlantısı ve firmware sürümleri",collectItem8:"Entegrasyon durumu (Spoolman, MQTT, HA)",collectItem9:"Ağ arayüzleri (yalnızca alt ağlar)",collectItem10:"Python paket sürümleri",collectItem11:"Veritabanı sağlık kontrolleri",collectItem12:"Docker ortam ayrıntıları",bundleGenerating:"Paket oluşturuluyor...",bundleStepConnection:"Yazıcı bağlantı kontrolleri çalıştırılıyor",bundleStepVirtualPrinters:"Sanal yazıcı kurulum kontrolleri çalıştırılıyor",bundleStepLogScan:"Son günlüklerde bilinen sorunlar taranıyor",bundleStepBuild:"Destek paketi ZIP oluşturuluyor"},fileManager:{title:"Dosya Yöneticisi",subtitle:"Baskı dosyalarınızı organize edin ve yönetin",uploadFiles:"Dosya Yükle",newFolder:"Yeni Klasör",folderName:"Klasör Adı",folderNamePlaceholder:"örn., Fonksiyonel Parçalar",renameFile:"Dosyayı Yeniden Adlandır",renameFolder:"Klasörü Yeniden Adlandır",invalidFilenameChar:'Baskı dosya adlarında "{{char}}" karakterine izin verilmiyor. Yazıcının SD kartı şu karakterleri reddeder: < > : " / \\ | ? *',moveFiles:"{{count}} Dosyayı Taşı",rootNoFolder:"Kök (Klasör Yok)",current:"mevcut",linkFolder:"Klasörü Bağla",linkFolderDescription:'Hızlı erişim için "{{name}}" klasörünü bir projeye veya arşive bağla.',project:"Proje",archive:"Arşiv",noProjectsFound:"Proje bulunamadı",noArchivesFound:"Arşiv bulunamadı",unlink:"Bağlantıyı Kaldır",link:"Bağla",dragDropFiles:"Dosyaları buraya sürükleyip bırakın",dropFilesHere:"Dosyaları buraya bırakın",orClickToBrowse:"veya göz atmak için tıklayın",allFileTypesSupported:"Tüm dosya türleri desteklenir. ZIP dosyaları çıkarılacak.",zipFilesDetected:"ZIP dosyaları algılandı",zipExtractOptions:"ZIP dosyaları çıkarılacak. Klasör yapısını nasıl yöneteceğinizi seçin:",preserveZipStructure:"ZIP'ten klasör yapısını koru",createFolderFromZip:"ZIP dosya adından klasör oluştur",stlThumbnailGeneration:"STL küçük resim oluşturma",zipMayContainStl:"ZIP dosyaları STL dosyaları içerebilir. Küçük resimler çıkarma sırasında oluşturulabilir.",thumbnailsCanBeGenerated:"STL dosyaları için küçük resimler oluşturulabilir. Büyük modellerin işlenmesi daha uzun sürebilir.",generateThumbnailsForStl:"STL dosyaları için küçük resim oluştur",threemfDetected:"3MF dosyaları algılandı",threemfExtractionInfo:"Yazıcı modeli, malzeme, renk ve baskı ayarları 3MF dosyalarından otomatik olarak çıkarılacak.",willBeExtracted:"Çıkarılacak",filesExtracted:"{{count}} dosya çıkarıldı",uploadComplete:"Yükleme tamamlandı: {{succeeded}} başarılı",uploadFailed:"Yükleme başarısız",zipFilesFailed:"{{count}} dosya başarısız",uploading:"Yükleniyor...",changeLink:"Bağlantıyı Değiştir...",linkTo:"Şuna bağla...",linkToProjectOrArchive:"Projeye veya arşive bağla",addToQueue:"Kuyruğa Ekle",schedulePrint:"Zamanla",generateThumbnail:"Küçük Resim Oluştur",generateThumbnails:"Küçük Resimler Oluştur",generateThumbnailsForMissing:"Eksik olan STL dosyaları için küçük resimler oluştur",gridView:"Izgara görünümü",listView:"Liste görünümü",lowDiskSpaceWarning:"Düşük disk alanı uyarısı",lowDiskSpaceDetails:"Toplam {{total}} alandan yalnızca {{free}} boş. Eşik ayarlarda {{threshold}} GB olarak ayarlanmış.",files:"Dosyalar",folders:"Klasörler",size:"Boyut",free:"Boş",allFiles:"Tüm Dosyalar",allExternal:"Harici",externalIsEmpty:"Harici dosya yok",externalEmptyDescription:"Bağlı harici klasörlerinizdeki dosyalar burada görünecek.",wrap:"Sar",enableTextWrapping:"Metin sarmayı etkinleştir",disableTextWrapping:"Metin sarmayı devre dışı bırak",collapse:"Daralt",collapseFoldersByDefault:"Klasörleri varsayılan olarak daralt",expandFoldersByDefault:"Klasörleri varsayılan olarak genişlet",dragToResizeTooltip:"Yeniden boyutlandırmak için sürükleyin, sıfırlamak için çift tıklayın",searchFiles:"Dosyalarda ara...",allTypes:"Tüm türler",prints:"Baskılar",ascending:"Artan",descending:"Azalan",resultsCount:"{{total}} dosyadan {{showing}} tanesi",selectAll:"Tümünü Seç",deselectAll:"Seçimi Kaldır",selected:"{{count}} seçildi",adding:"Ekleniyor...",loadingFiles:"Dosyalar yükleniyor...",folderIsEmpty:"Klasör boş",noFilesYet:"Henüz dosya yok",folderEmptyDescription:"Başlamak için bu klasöre dosya yükleyin veya dosyaları taşıyın.",noFilesDescription:"Baskıyla ilgili dosyalarınızı organize etmeye başlamak için dosya yükleyin.",noMatchingFiles:"Eşleşen dosya yok",noMatchingFilesDescription:"Mevcut arama veya filtre kriterlerinizle eşleşen dosya yok.",clearFilters:"Filtreleri temizle",printedCount:"{{count}}x yazdırıldı",uploadedBy:"Yükleyen",deleteFolder:"Klasörü Sil",deleteFile:"Dosyayı Sil",deleteFilesCount:"{{count}} Dosya Sil",deleteFolderConfirm:"Bu klasörü silmek istediğinizden emin misiniz? İçindeki tüm dosyalar da silinecek.",deleteFileConfirm:"Bu dosyayı silmek istediğinizden emin misiniz?",deleteFilesConfirm:"{{count}} seçili dosyayı silmek istediğinizden emin misiniz? Bu işlem geri alınamaz.",deleting:"Siliniyor...",noPermissionRenameFolder:"Klasörleri yeniden adlandırma izniniz yok",noPermissionLinkFolder:"Klasörleri bağlama izniniz yok",noPermissionDeleteFolder:"Klasörleri silme izniniz yok",noPermissionPrint:"Yazdırma izniniz yok",noPermissionAddToQueue:"Kuyruğa ekleme izniniz yok",noPermissionSlice:"Dosyaları dilimleme izniniz yok",noPermissionDownload:"Dosyaları indirme izniniz yok",noPermissionRenameFile:"Bu dosyayı yeniden adlandırma izniniz yok",noPermissionGenerateThumbnail:"Küçük resim oluşturma izniniz yok",noPermissionDeleteFile:"Bu dosyayı silme izniniz yok",noPermissionCreateFolder:"Klasör oluşturma izniniz yok",noPermissionUpload:"Dosya yükleme izniniz yok",noPermissionMoveFiles:"Dosyaları taşıma izniniz yok",noPermissionDeleteFiles:"Dosyaları silme izniniz yok",linkExternal:"Harici Bağla",linkExternalFolder:"Harici Klasör Bağla",linkExternalFolderDescription:"Bir ana bilgisayar dizinini (NAS, USB, ağ paylaşımı) Dosya Yöneticisine bağla. Dosyalar kopyalanmaz — orijinal yoldan doğrudan erişilir.",externalFolderNamePlaceholder:"örn., NAS Baskıları",externalPath:"Ana Bilgisayar Yolu",externalPathHelp:"Docker ana bilgisayarındaki dizinin mutlak yolu. Konteynere bind-mount edilmiş olmalıdır.",readOnly:"Salt Okunur",readOnlyHelp:"yüklemeleri ve silmeleri engeller",showHiddenFiles:"Gizli dosyaları göster (nokta dosyaları)",externalFolder:"Harici Klasör",scanFolder:"Tara",toast:{folderCreated:"Klasör oluşturuldu",folderDeleted:"Klasör silindi",fileDeleted:"Dosya silindi",filesDeleted:"{{count}} dosya silindi",filesMoved:"Dosyalar taşındı",folderLinked:"Klasör bağlandı",folderUnlinked:"Klasör bağlantısı kaldırıldı",externalFolderLinked:"Harici klasör bağlandı ve tarandı",folderScanned:"Tarama tamamlandı: {{added}} eklendi, {{removed}} kaldırıldı",addedToQueue:"Kuyruğa {{count}} dosya eklendi",addedToQueuePartial:"{{added}} dosya eklendi, {{failed}} başarısız",failedToAddToQueue:"Dosyalar eklenemedi: {{error}}",fileRenamed:"Dosya yeniden adlandırıldı",folderRenamed:"Klasör yeniden adlandırıldı",thumbnailsGenerated:"{{count}} küçük resim oluşturuldu",thumbnailsGeneratedPartial:"{{succeeded}} küçük resim oluşturuldu, {{failed}} başarısız",noStlMissingThumbnails:"Küçük resmi eksik STL dosyası yok",failedToGenerateThumbnails:"Küçük resimler oluşturulamadı: {{error}}",thumbnailGenerated:"Küçük resim oluşturuldu",failedToGenerateThumbnail:"Küçük resim oluşturulamadı: {{error}}"}},projects:{title:"Projeler",subtitle:"3D baskı projelerinizi organize edin ve takip edin",newProject:"Yeni Proje",editProject:"Projeyi Düzenle",deleteProject:"Projeyi Sil",projectName:"Proje Adı",description:"Açıklama",noProjects:"Henüz proje yok",noProjectsFiltered:"{{status}} proje yok",noProjectsFilteredHelp:"Hiç {{status}} projeniz yok. Projeler durumları değiştiğinde burada görünecek.",createFirst:"İlgili baskıları organize etmeye, ilerlemeyi takip etmeye ve yapımlarınızı yönetmeye başlamak için ilk projenizi oluşturun.",createFirstButton:"İlk Projenizi Oluşturun",create:"Oluştur",files:"Dosyalar",prints:"Baskılar",plates:"plaka",parts:"parça",lastModified:"Son Değiştirme",deleteConfirm:"Bu projeyi silmek istediğinizden emin misiniz? Arşivler ve kuyruk öğelerinin bağlantısı kaldırılacak ancak silinmeyecek.",addFiles:"Dosya Ekle",removeFile:"Dosyayı Kaldır",viewDetails:"Detayları Görüntüle",namePlaceholder:"örn., Voron 2.4 Yapımı",descriptionPlaceholder:"İsteğe bağlı açıklama...",urlLabel:"URL",urlPlaceholder:"https://makerworld.com/...",urlInvalid:"URL http:// veya https:// ile başlamalı",openExternalUrl:"Proje URL'sini aç",coverImageLabel:"Kapak fotoğrafı",coverImageAlt:"Proje kapak fotoğrafı",coverImageUpload:"Yükle",coverImageReplace:"Değiştir",coverImageRemove:"Kaldır",color:"Renk",targetPlates:"Hedef Plakalar",targetPlatesPlaceholder:"örn., 25",targetPlatesHelp:"Baskı işi sayısı",targetParts:"Hedef Parçalar",targetPartsPlaceholder:"örn., 150",targetPartsHelp:"Gereken toplam nesne",tagsLabel:"Etiketler (virgülle ayrılmış)",tagsPlaceholder:"örn., voron, fonksiyonel, hediye",dueDate:"Son Tarih",priority:"Öncelik",priorityLow:"Düşük",priorityNormal:"Normal",priorityHigh:"Yüksek",priorityUrgent:"Acil",statusActive:"Aktif",statusCompleted:"Tamamlandı",statusArchived:"Arşivlendi",done:"Tamamlandı",completed:"tamamlandı",failed:"başarısız",inQueue:"kuyrukta",noPrintsYet:"Henüz baskı yok",printJobs:"Baskı işleri (plakalar)",partsPrinted:"Yazdırılan parçalar",failedParts:"Başarısız parçalar",import:"İçe Aktar",export:"Dışa Aktar",importProject:"Projeyi içe aktar",exportAll:"Tüm projeleri dışa aktar",loading:"Projeler yükleniyor...",noEditPermission:"Projeleri düzenleme izniniz yok",noDeletePermission:"Projeleri silme izniniz yok",noCreatePermission:"Proje oluşturma izniniz yok",noImportPermission:"Projeleri içe aktarma izniniz yok",noExportPermission:"Projeleri dışa aktarma izniniz yok",toast:{created:"Proje oluşturuldu",updated:"Proje güncellendi",deleted:"Proje silindi",imported:"Proje içe aktarıldı",multipleImported:"{{count}} proje içe aktarıldı",importFailed:"İçe aktarma başarısız",exported:"Projeler dışa aktarıldı (yalnızca meta veriler)"}},projectDetail:{notFound:"Proje bulunamadı",backToProjects:"Projelere Dön",export:"Dışa Aktar",exportProject:"Projeyi dışa aktar",noExportPermission:"Projeleri dışa aktarma izniniz yok",noEditPermission:"Projeleri düzenleme izniniz yok",partOf:"Şunun parçası:",priorityLabel:"Öncelik:",noPrints:"Bu projede henüz baskı yok",status:{active:"Aktif",completed:"Tamamlandı",archived:"Arşivlendi"},priority:{low:"Düşük",normal:"Normal",high:"Yüksek",urgent:"Acil"},dueDate:{overdue:"Gecikmiş",today:"Bugün teslim",daysLeft:"{{count}} gün kaldı"},progress:{platesProgress:"Plaka İlerlemesi",partsProgress:"Parça İlerlemesi",printJobs:"baskı işi",parts:"parça",percentComplete:"%{{percent}} tamamlandı",remaining:"{{count}} kaldı"},stats:{printJobs:"Baskı İşleri",total:"toplam",failed:"{{count}} başarısız",partsPrinted:"{{count}} parça yazdırıldı",printTime:"Baskı Süresi",filamentUsed:"Kullanılan Filament"},cost:{title:"Maliyet Takibi",filamentCost:"Filament Maliyeti",energy:"Enerji",totalCost:"Toplam Maliyet",total:"Toplam",includesBom:"BOM dahil",budget:"Bütçe",remaining:"Kalan"},subProjects:{title:"Alt projeler ({{count}})"},notes:{title:"Notlar",noEditPermission:"Notları düzenleme izniniz yok",placeholder:"Bu proje hakkında notlar ekleyin...",empty:"Henüz not yok. Not eklemek için Düzenle'ye tıklayın."},files:{title:"Dosyalar",linkFolders:"Dosya Yöneticisinden klasörleri bağla",forQuickAccess:"hızlı erişim için bu projeye.",fileCount:"{{count}} dosya",empty:"Bağlı klasör yok. Dosya Yöneticisine gidin ve bu projeye bir klasör bağlayın.",noFiles:"Bu klasörde dosya yok.",print:"Şimdi Yazdır",addToQueue:"Kuyruğa Ekle"},bom:{title:"Malzeme Listesi",acquired:"{{completed}}/{{total}} edinildi",showAll:"Tümünü göster",hideDone:"Tamamlananları gizle",addPart:"Parça Ekle",noAddPermission:"Parça ekleme izniniz yok",partNamePlaceholder:"Parça adı (örn., M3x8 vidalar)",partName:"Parça adı",qty:"Adet",price:"Fiyat ({{currency}})",sourcingUrlPlaceholder:"Kaynak URL'si (isteğe bağlı)",remarksPlaceholder:"Notlar (isteğe bağlı)",deletePart:"Parçayı Sil",deleteConfirm:'"{{name}}" silmek istediğinizden emin misiniz?',noUpdatePermission:"Parçaları güncelleme izniniz yok",noEditPermission:"Parçaları düzenleme izniniz yok",noDeletePermission:"Parçaları silme izniniz yok",totalCost:"Toplam maliyet:",empty:"Malzeme listesinde parça yok. Nelerin tedarik edilmesi gerektiğini takip etmek için donanım, elektronik veya diğer bileşenler ekleyin."},timeline:{title:"Etkinlik Zaman Çizelgesi",empty:"Henüz etkinlik yok."},template:{saveAsTemplate:"Şablon Olarak Kaydet",noCreatePermission:"Şablon oluşturma izniniz yok"},queue:{title:"Kuyruk",viewAll:"Tümünü görüntüle",printing:"{{count}} yazdırılıyor",queued:"{{count}} kuyrukta"},prints:{title:"Baskılar ({{count}})"},toast:{projectUpdated:"Proje güncellendi",partAdded:"Parça eklendi",partRemoved:"Parça kaldırıldı",exportFailed:"Dışa aktarma başarısız",projectExported:"Proje dışa aktarıldı",templateCreated:"Şablon oluşturuldu"}},system:{title:"Sistem Bilgisi",version:"Sürüm",uptime:"Çalışma Süresi",cpuUsage:"CPU Kullanımı",memoryUsage:"Bellek Kullanımı",diskUsage:"Disk Kullanımı",networkInfo:"Ağ Bilgisi",logs:"Günlükler",debugMode:"Hata Ayıklama Modu",enableDebug:"Hata Ayıklama Kaydını Etkinleştir",disableDebug:"Hata Ayıklama Kaydını Devre Dışı Bırak",downloadLogs:"Günlükleri İndir",clearLogs:"Günlükleri Temizle",dockerInfo:"Docker Bilgisi",containerName:"Konteyner Adı",imageName:"İmaj Adı",platform:"Platform",architecture:"Mimari"},library:{title:"Filament Kütüphanesi",addFilament:"Filament Ekle",editFilament:"Filamenti Düzenle",deleteFilament:"Filamenti Sil",vendor:"Satıcı",material:"Malzeme",color:"Renk",kFactor:"K Faktörü",temperature:"Sıcaklık",noFilaments:"Kütüphanede filament yok",deleteConfirm:"Bu filamenti silmek istediğinizden emin misiniz?",importFromPrinter:"Yazıcıdan İçe Aktar",exportToFile:"Dosyaya Dışa Aktar"},slice:{title:"Modeli dilimle",action:"Dilimle",actionAll:"Tüm {{count}} plakayı dilimle",actionAllTitle:"Her plakayı tek bir çok plakalı çıktıya dilimle (tek arşiv). Filament seçimi projenin tanımladığı her yuvayı kapsar.",allPlatesToggle:"Tüm {{count}} plakayı dilimle",slicing:"Dilimleniyor…",printer:"Yazıcı profili",process:"İşlem profili",filament:"Filament profili",filamentSlot:"Filament {{index}} ({{type}})",selectPreset:"— Bir ön ayar seçin —",loadingPresets:"Ön ayarlar yükleniyor…",analyzingPlateFilaments:"Plaka filamentleri analiz ediliyor…",analyzingPlateFilamentsHint:"Bu plakanın hangi AMS yuvalarını kullandığını keşfetmek için bir önizleme dilimleme çalıştırılıyor. Sonradan önbelleğe alınır — yeniden açma anlıktır.",previewToast:"{{name}} analiz ediliyor — {{elapsed}}",previewWithProgress:"{{name}} analiz ediliyor — {{stage}} (%{{percent}}) — {{elapsed}}",notUsedByPlate:"— bu plaka tarafından kullanılmıyor",noPresetsForSlot:"Kullanılabilir ön ayar yok",otherPrinters:"Diğer yazıcılar",presetsLoadFailed:"Ön ayarlar yüklenemedi. Önce içe aktarmak için Ayarlar → Profiller'i açın.",refreshPresets:"Yenile",refreshPresetsTitle:"Ön ayarları yenile — en güncel bulut ve paketli listeleri getir (Bambu Studio veya Bambu Handy'de bir ön ayar sildikten sonra kullanın)",allPresetsRequired:"Tüm ön ayarlar seçilmelidir",bundle:"Dilimleyici paketi",bundleNone:"— Hiçbiri (ön ayarları ayrı ayrı seçin) —",bundleAllRequired:"Paket işlemi ve her filament yuvası seçilmelidir",enqueuing:"Dilimleme işi gönderiliyor…",queued:"Kuyrukta…",failed:"Dilimleme başarısız. Dilimleyici yardımcı bileşen günlüklerini kontrol edin.",startedToast:"{{name}} arka planda dilimleniyor…",queuedToast:"Kuyrukta: {{name}} — {{elapsed}}",runningToast:"{{name}} dilimleniyor — {{elapsed}}",runningWithProgress:"{{name}} — {{stage}} (%{{percent}}) — {{elapsed}}",runningWithProgressMultiPlate:"{{plateCount}}/{{plateIndex}} plaka • {{name}} — {{stage}} (%{{percent}}) — {{elapsed}}",completedToast:"{{name}} dilimlendi",failedTitle:"Dilimleme başarısız",failedToast:"{{name}} dilimleme başarısız: {{detail}}",tier:{local:"İçe aktarılmış",cloud:"Bambu Cloud",orcaCloud:"Orca Cloud",standard:"Standart"},cloud:{notAuthenticated:"Bulut ön ayarlarınızı görmek için Bambu Cloud'a giriş yapın (Ayarlar → Profiller → Bambu Cloud).",expired:"Bambu Cloud oturumu süresi doldu — bulut ön ayarlarınızı yenilemek için tekrar giriş yapın.",unreachable:"Bambu Cloud şu anda erişilemez. Yerel ve standart ön ayarlar hâlâ çalışıyor."},orcaCloud:{notAuthenticated:"Orca ön ayarlarınızı görmek için Orca Cloud'a giriş yapın (Profiller → Orca Cloud).",expired:"Orca Cloud oturumu sona erdi — Orca ön ayarlarınızı yenilemek için tekrar giriş yapın.",unreachable:"Orca Cloud şu anda erişilemez. Diğer ön ayarlar çalışmaya devam ediyor."},bedType:{label:"Baskı plakası",auto:"Otomatik (işlem ön ayarı kullan)",coolPlate:"Soğuk Plaka",coolPlateSuperTack:"Soğuk Plaka SuperTack",engineering:"Mühendislik Plakası",highTemp:"Yüksek Sıcaklık Plakası",texturedPEI:"Dokulu PEI Plakası",smoothPEI:"Düz PEI Plakası"}},spoolman:{title:"Spoolman Entegrasyonu",enabled:"Spoolman Etkin",url:"Spoolman URL",connected:"Bağlı",disconnected:"Bağlı Değil",testConnection:"Bağlantıyı Test Et",sync:"Senkronize Et",syncing:"Senkronize ediliyor...",lastSync:"Son Senkronizasyon",linkToSpoolman:"Spoolman'a Bağla",openInSpoolman:"Spoolman'da Aç",unlinkSpool:"Makara Bağlantısını Kaldır",unlinkConfirmTitle:"Makara Atamasını Kaldır?",unlinkConfirmMessage:"Bu, makarayı bu yuvadan kaldıracak. Makara verisinin kendisi değişmeyecek.",selectSpool:"Makara Seç",noUnlinkedSpools:"Atanmamış makara yok",linkSuccess:"Makara başarıyla atandı",linkFailed:"Makara atanamadı",unlinkSuccess:"Makara ataması başarıyla kaldırıldı",unlinkFailed:"Makara ataması kaldırılamadı",linkedSpool:"Atanan makara",spoolId:"Makara ID",fillSourceLabel:"(Spoolman)",weight:"Ağırlık",remaining:"Kalan",disableWeightSync:"AMS Tahmini Ağırlık Senkronizasyonunu Devre Dışı Bırak",disableWeightSyncDesc:"AMS tahminlerinden kalan kapasiteyi güncelleme. AMS yüzde tabanlı tahminler yerine Spoolman'ın kullanım takibini tercih ediyorsanız bunu kullanın. Yeni makaralar yine de başlangıç ağırlığı olarak AMS tahminini kullanacak.",reportPartialUsage:"Başarısız Baskılar için Kısmi Kullanımı Bildir",reportPartialUsageDesc:"Bir baskı başarısız olduğunda veya iptal edildiğinde, katman ilerlemesine göre o noktaya kadar kullanılan tahmini filamenti bildir."},inventory:{title:"Makara Envanteri",subtitle:"Makaralarınızı yönetin",spoolmanMixedContentTitle:"Spoolman HTTPS üzerinden yüklenemiyor — tarayıcınız tarafından karışık içerik engellendi",spoolmanMixedContentBody:"Bambuddy HTTPS üzerinden sunuluyor (ters proxy'niz aracılığıyla), ancak Spoolman URL'niz hâlâ düz HTTP. Tarayıcılar güvenlik için karışık içeriği engeller, bu nedenle gömülü Spoolman arayüzü oluşturulamaz. Bunun çalışması için Spoolman'in HTTPS üzerinden erişilebilir olması gerekiyor.",spoolmanMixedContentFixReverseProxy:"Spoolman'i Bambuddy ile aynı ters proxy'nin (Traefik / Nginx / Caddy) arkasına HTTPS ile koyun, ardından Ayarlardaki Spoolman URL'sini yeni HTTPS adresine güncelleyin.",spoolmanMixedContentFixOpenNewTab:"Geçici bir çözüm olarak, Spoolman'i HTTP üzerinden yeni bir tarayıcı sekmesinde açın — karışık içerik kuralları yalnızca gömülü çerçevelere uygulanır, bu nedenle bağımsız bir sekme yine çalışır.",spoolmanOpenInNewTab:"Spoolman'i yeni sekmede aç",labels:{title:"Makara etiketleri yazdır",selectedCount:"{{count}} seçildi",pickSpools:"Hangi makaralar için etiket yazdırılacağını seçin:",searchPlaceholder:"Ad, marka veya #ID ara",filterByMaterial:"Malzeme:",allMaterials:"Tümü",selectVisible:"Görünen tümünü seç ({{count}})",deselectVisible:"Görünenleri seçimden kaldır",clearAll:"Tümünü temizle",noSpoolsToShow:"Gösterilecek makara yok. Filtrenizi ayarlayın ve tekrar deneyin.",noMatches:"Mevcut arama veya filtreyle eşleşen makara yok.",printOne:"Bu makara için etiket yazdır",printLabels:"Etiketleri yazdır…",bulkTitle:"Şu anda gösterilen {{count}} makaradan etiket yazdırılacak olanları seçin",noSpoolsTitle:"Etiketlenecek makara yok",error:"Etiketler oluşturulamadı: {{msg}}",sortBy:{label:"Sırala:",id:"ID'ye göre",color:"Renge göre"},templates:{amsHolderSmall:{label:"AMS tutucu — küçük (74 × 33 mm)",hint:"Sayfa başına tek etiket; MakerWorld model 752566 (AMS Filament Etiket Tutucu) yazdırılabilir etiketle eşleşir."},amsHolderLarge:{label:"AMS tutucu — büyük (75 × 55 mm)",hint:"Sayfa başına tek etiket; AMS Filament Etiket Tutucu'nun karton uçlu varyantına uyar. Numune, marka, malzeme, ID ve QR kod için yeterli yer."},box40x30:{label:"Kutu etiketi (40 × 30 mm)",hint:"Sayfa başına tek etiket; yaygın DK/Brother rulo boyutu, filament torbası ve depolama kutusu etiketleri için iyi."},box:{label:"Kutu etiketi (62 × 29 mm)",hint:"Sayfa başına tek etiket; Brother PT/QL ve Dymo küçük etiketleri için boyutlandırılmış."},averyL7160:{label:"Avery L7160 — A4 sayfa (38.1 × 63.5 mm × 21)",hint:"AB sayfa stoğu; A4 sayfa başına 21 etiket."},avery5160:{label:"Avery 5160 — US Letter sayfa (25.4 × 66.7 mm × 30)",hint:"ABD sayfa stoğu; Letter sayfası başına 30 etiket."}}},addSpool:"Makara Ekle",editSpool:"Makarayı Düzenle",copySpool:"Makarayı Kopyala",material:"Malzeme",selectMaterial:"Malzeme seç...",subtype:"Alt tür",brand:"Marka",searchBrand:"Marka ara...",useCustomBrand:'"{{brand}}" kullan',useCustomMaterial:"Özel malzeme kullan: {{material}}",colorName:"Renk Adı",colorNamePlaceholder:"Yeşim Beyazı, Ateş Kırmızısı...",color:"Renk",hexColor:"Hex Renk",pickColor:"Özel renk seç",labelWeight:"Etiket Ağırlığı",coreWeight:"Boş Makara Ağırlığı",searchSpoolWeight:"Makara ağırlığı ara...",weightUsed:"Kullanılan",currentWeight:"Kalan Ağırlık",measuredWeight:"Ölçülen Ağırlık",spoolName:"Makara",costPerKg:"kg başına maliyet",storageLocation:"Depolama Konumu",storageLocationPlaceholder:"örn. Raf A, Çekmece 1",openInInventory:"Envanterde Aç",measuredWeightError:"Ölçülen ağırlık {{min}}g ile {{max}}g arasında olmalı.",slicerFilament:"Dilimleyici Filamenti",slicerFilamentName:"Dilimleyici Ön Ayar Adı",slicerPreset:"Dilimleyici Ön Ayarı",searchPresets:"Filament ön ayarlarında ara...",selectedPreset:"Seçildi",noPresetsFound:"Ön ayar bulunamadı",tempOverrides:"Sıcaklık Geçersiz Kılmaları",note:"Not",notePlaceholder:"Bu makara hakkında ek notlar...",category:"Kategori",categoryPlaceholder:"örn. Üretim, Prototip, Müşteri A",categoryNone:"Kategorisiz",storageLocationNone:"Konum ayarlanmamış",lowStockThresholdOverride:"Düşük stok eşiği (bu makara)",lowStockThresholdOverrideHelp:"Global eşiği kullanmak için boş bırakın (%{{global}}).",clearRfid:"RFID Etiketini Temizle",rfidCleared:"RFID etiketi temizlendi",archive:"Arşivle",restore:"Geri Yükle",noSpools:"Henüz makara yok. Başlamak için ilk makaranızı ekleyin.",noAvailableSpools:"Kullanılabilir makara yok. Envanterinize bir makara ekleyin veya önce başka bir yuvadan atamayı kaldırın.",kProfiles:"K-Profilleri",addKProfile:"K-Profili Ekle",assignSpool:"Makara Ata",unassignSpool:"Atamayı Kaldır",assignSuccess:"Makara atandı ve AMS yuvası yapılandırıldı",assignFailed:"Makara atanamadı",selectSpool:"Bu yuvaya atamak için bir makara seçin",assigned:"Atandı",assigning:"Atanıyor...",searchSpools:"Makaralarda ara...",showAllSpools:"Tüm makaraları göster",spoolmanSpools:"Spoolman Makaraları",allMaterials:"Tüm Malzemeler",filterByBrand:"Markaya göre filtrele...",showArchived:"Arşivlenmişleri göster",quickAdd:"Hızlı Ekle (Stok)",quantity:"Miktar",stock:"Stok",configured:"Yapılandırıldı",spoolsCreated:"{{count}} makara oluşturuldu",spoolsPartiallyCreated:"{{total}} makaradan {{created}} tanesi oluşturuldu (bazıları başarısız)",spoolCreated:"Makara oluşturuldu",spoolUpdated:"Makara güncellendi",spoolDeleted:"Makara silindi",deepLinkSpoolNotFound:"Makara bulunamadı",deepLinkFetchFailed:"Makara yüklenemedi — tekrar deneyin",spoolArchived:"Makara arşivlendi",spoolRestored:"Makara geri yüklendi",kProfileSaveFailed:"K-profili ayarları kaydedilemedi",syncWeightSpoolNotFound:"Makara bulunamadı — silinmiş olabilir",syncWeightSpoolmanUnreachable:"Spoolman'a erişilemiyor — daha sonra tekrar deneyin",syncWeightFailed:"Ağırlık senkronize edilemedi",spoolmanUnreachable:"Spoolman erişilebilir değil — lütfen daha sonra tekrar deneyin",deleteSpoolNotFound:"Makara bulunamadı — zaten silinmiş olabilir",deleteFailed:"Makara silinemedi",archiveSpoolNotFound:"Makara bulunamadı — zaten silinmiş olabilir",archiveFailed:"Makara arşivlenemedi",restoreSpoolNotFound:"Makara bulunamadı — zaten silinmiş olabilir",restoreFailed:"Makara geri yüklenemedi",saveFailed:"Değişiklikler kaydedilemedi",tagClearFailed:"Etiket temizlenemedi",deleteConfirm:"Bu makarayı silmek istediğinizden emin misiniz? Bu geri alınamaz.",archiveConfirm:"Bu makarayı arşivlemek istediğinizden emin misiniz?",advancedSettings:"Gelişmiş Ayarlar",filamentInfoTab:"Filament Bilgisi",paProfileTab:"PA Profili",filamentInfo:"Filament",additional:"Ek",loadingPresets:"Bulut ön ayarları yükleniyor...",cloudConnected:"Bulut bağlı",cloudNotConnected:"Bulut bağlı değil (varsayılanlar kullanılıyor)",recentColors:"Son Kullanılan",searchColors:"Renklerde ara...",searchResults:"Arama sonuçları",allColors:"Tüm renkler",commonColors:"Yaygın renkler",showLess:"Daha az göster",showAll:"Tümünü göster",noColorsFound:"Aramanızla eşleşen renk yok",noResults:"Eşleşme bulunamadı",extraColorsLabel:"Ekstra renkler",extraColorsPlaceholder:"EC984C,#6CD4BC,A66EB9,D87694",extraColorsHint:"Virgülle ayrılmış 2 ile 8 arası hex durağı yapıştırın. Bir gradyan olarak görüntülenir.",extraColorsInvalid:"Geçersiz hex yok sayıldı: {{tokens}}",colorEffectLabel:"Efekt",colorEffect:{none:"Yok",sparkle:"Parıltı",wood:"Ahşap",marble:"Mermer",glow:"Parlama",matte:"Mat",silk:"İpek",galaxy:"Galaksi",rainbow:"Gökkuşağı",metal:"Metal",translucent:"Yarı saydam",gradient:"Gradyan",dualColor:"Çift Renk",triColor:"Üç Renk",multicolor:"Çok Renkli"},selectMaterialFirst:"Lütfen önce Filament Bilgisi sekmesinde bir malzeme seçin.",noPrintersConfigured:"Yapılandırılmış yazıcı yok. PA profillerini kullanmak için yazıcı ekleyin.",matchingFilter:"Eşleşen",anyBrand:"Herhangi marka",anyVariant:"Herhangi varyant",autoSelect:"Otomatik seç",matches:"eşleşme",match:"eşleşme",noMatches:"Eşleşme yok",connected:"Bağlı",offline:"Çevrimdışı",printerOffline:"Yazıcı çevrimdışı. Kalibrasyon profillerini görüntülemek için bağlanın.",noKProfilesMatch:"Seçilen filamentle eşleşen K-profili yok.",leftNozzle:"Sol Nozul",rightNozzle:"Sağ Nozul",profilesSelected:"kalibrasyon profili seçildi",totalInventory:"Toplam Envanter",totalConsumed:"Toplam Tüketim",byMaterial:"Malzemeye Göre",inPrinter:"Yazıcıda",lowStock:"Düşük Stok",sinceTracking:"Takip başladığından beri",resetConsumedCounter:"Sayacı sıfırla",resetConsumedCounterTooltip:"Bu makara için tüketilen gram sayacını sıfırla. Kalan ağırlık değişmez.",resetConsumedCounterConfirm:"Bu makaranın tüketilen gram sayacı 0'a sıfırlansın mı? Gelecekteki baskılar sıfırdan tekrar takip edilecek. Makaranın kendisi, kalan ağırlık hesaplaması ve ayarlarınız değiştirilmez.",resetAllConsumedCounters:"Tüm sayaçları sıfırla",resetAllConsumedCountersTooltip:"Her makarada tüketilen gram sayacını sıfırla. Kalan ağırlıklar değişmez.",resetAllConsumedCountersConfirm:`Tüm {{count}} makaradaki (arşivlenmişler dahil) tüketilen gram sayacı 0'a sıfırlansın mı? Bu, "Toplam Tüketim" istatistiğini temizler, böylece gelecekteki baskılar sıfırdan takip edilir. Makaralar ve kalan ağırlıklar değiştirilmez.`,consumedCounterReset:"Sayaç sıfırlandı",allConsumedCountersReset:"{{count}} makaranın sayacı sıfırlandı",resetConsumedCounterFailed:"Sayaç sıfırlanamadı",loadedInAms:"AMS/Ext'te Yüklü",remaining:"Kalan",weightCheck:"Ağırlık Kontrolü",lastWeighed:"Son tartım",neverWeighed:"Hiç tartılmadı",search:"Makaralarda ara...",showing:"Gösterilen",to:"-",of:"/",show:"Göster",spools:"makara",spool:"makara",page:"Sayfa",noSpoolsMatch:"Sonuç bulunamadı",noSpoolsMatchDesc:"Aradığınızı bulmak için aramanızı veya filtrelerinizi ayarlamayı deneyin.",active:"Aktif",archived:"Arşivlendi",all:"Tümü",used:"Kullanılmış",new:"Yeni",clearFilters:"Filtreleri temizle",table:"Tablo",cards:"Kartlar",net:"Net",groupSimilar:"Grupla",groupedSpools:"{{count}} aynı makara",groupedRows:"satır",columns:"Sütunlar",configureColumns:"Sütunları Yapılandır",configureColumnsDesc:"Sütunları yeniden sıralamak için sürükleyin veya okları kullanın. Göz simgesiyle görünürlüğü değiştirin.",visible:"görünür",reset:"Sıfırla",cancel:"İptal",applyChanges:"Değişiklikleri Uygula",moveUp:"Yukarı taşı",moveDown:"Aşağı taşı",hideColumn:"Sütunu gizle",showColumn:"Sütunu göster",linkToSpool:"Makaraya Bağla",tagLinked:"Etiket makaraya bağlandı",tagLinkFailed:"Etiket bağlanamadı",tagAlreadyLinked:"Etiket zaten başka bir makaraya bağlı",unknownTag:"Bilinmeyen RFID etiketi algılandı",usageHistory:"Kullanım Geçmişi",noUsageHistory:"Henüz kullanım kaydedilmedi",printName:"Baskı Adı",weightConsumed:"Tüketilen Ağırlık",clearHistory:"Temizle",historyCleared:"Kullanım geçmişi temizlendi",fillSourceLabel:"(Env)",lowStockThresholdError:"Eşik 0.1 ile 99.9 arasında olmalı",assignMismatchTitle:"Malzeme uyumsuzluğu",assignMismatchMessage:'Seçilen makara malzemesi "{{spoolMaterial}}", {{location}} için tepsi malzemesi "{{trayMaterial}}" ile eşleşmiyor. Yine de atansın mı?',assignMismatchConfirm:"Yine de Ata",assignPartialMismatchMessage:'Makara malzemesi "{{spoolMaterial}}", {{location}} konumundaki "{{trayMaterial}}" ile benzer ancak tam olarak eşleşmiyor. Devam etmek istiyor musunuz?',assignProfileMismatchMessage:'Makara profili "{{spoolProfile}}", {{location}} konumundaki tepsi profili "{{trayProfile}}" ile eşleşmiyor. Devam etmek istiyor musunuz?',assignReconfigureNote:"AMS yuvası, makaranın profilini kullanacak şekilde yeniden yapılandırılacak.",spoolmanFilamentCatalog:"Spoolman Filament Kataloğu",pickFromSpoolmanCatalog:"Spoolman kataloğundan seç…",spoolmanFilamentSelected:"Filament Spoolman kataloğundan seçildi",spoolmanFilamentUnlinked:"Filament katalog bağlantısı temizlendi",noSpoolmanFilaments:"Spoolman kataloğunda filament bulunamadı",spoolmanFilamentColorSwatch:"Filament rengi",spoolWeightManagedBySpoolman:"Boş makara ağırlığı Spoolman'de filament türü başına yönetilir",spoolmanCatalogLoadFailed:"Spoolman filament kataloğu yüklenemedi"},timelapse:{title:"Zaman Atlamalı Video",create:"Zaman Atlamalı Video Oluştur",download:"İndir",delete:"Sil",preview:"Önizleme",frameRate:"Kare Hızı",quality:"Kalite",processing:"İşleniyor...",noTimelapses:"Kullanılabilir zaman atlamalı video yok"},ams:{title:"AMS",slot:"Yuva",empty:"Boş",emptySlot:"Boş yuva",slotEmpty:"Boş",emptySlotReset:"Atanmış filament yok",unknown:"Bilinmiyor",humidity:"Nem",temperature:"Sıcaklık",filamentType:"Filament Türü",filamentColor:"Renk",remaining:"Kalan",history:"AMS Geçmişi",noHistory:"Geçmiş mevcut değil",configureSlot:"Yuvayı Yapılandır",externalSpool:"Harici Makara",profile:"Profil",kFactor:"K Faktörü",fill:"Doldur",configure:"Yapılandır",used:"kullanılan",remainingUnit:"kalan"},printModal:{title:"Baskıyı Başlat",selectPrinter:"Yazıcı Seç",selectPlate:"Plaka Seç",filamentMapping:"Filament Eşlemesi",totalCost:"Toplam maliyet:",slotRemainingShort:" - {{grams}}g kaldı",printSettings:"Baskı Ayarları",bedLeveling:"Tabla Seviyelendirme",flowCalibration:"Akış Kalibrasyonu",vibrationCalibration:"Titreşim Kalibrasyonu",layerInspection:"İlk Katman Denetimi",timelapse:"Zaman Atlamalı Video",startPrint:"Baskıyı Başlat",addToQueue:"Kuyruğa Ekle",cancel:"İptal",noPrintersAvailable:"Kullanılabilir yazıcı yok",printerBusy:"Yazıcı meşgul",printerOffline:"Yazıcı çevrimdışı",sameTypeDifferentColor:"Aynı tür, farklı renk",filamentTypeNotLoaded:"Filament türü yüklenmedi",openCalendar:"Takvimi aç",leftNozzle:"S",rightNozzle:"R",leftNozzleTooltip:"Sol nozul",rightNozzleTooltip:"Sağ nozul",filamentOverride:"Filament Geçersiz Kılma",filamentOverrideHint:"Model tabanlı atama için isteğe bağlı olarak filamentleri geçersiz kıl. Planlayıcı, orijinal 3MF değerleri yerine seçtiğiniz filamentlere göre eşleşecek.",originalFilament:"Orijinal",overrideWith:"Şununla geçersiz kıl",resetToOriginal:"Orijinale sıfırla",insufficientFilamentTitle:"Yeterli filament yok",insufficientFilamentMessage:"Bazı atanmış makaralarda bu baskının ihtiyaç duyduğundan daha az filament kaldı:",insufficientFilamentLine:"{{printer}} - {{slot}}: {{required}}g gerekli, {{remaining}}g kaldı",printAnyway:"Yine de yazdır",forceColorMatch:"Renk eşleşmesini zorla",staggerPrinterStarts:"Yazıcı başlangıçlarını kademelendir",staggerGroupSize:"Grup boyutu",staggerInterval:"Aralık (dk)",staggerPreview:"{{printers}} yazıcı → {{size}} kişilik {{groups}} grup, her {{interval}} dk'da bir başlatılıyor",staggerLastGroup:"son grup: {{count}}",staggerTotal:"toplam: {{minutes}} dk",staggerToPrinters:"{{count}} yazıcıya kademelendir",gcodeInjection:"Otomatik baskı G-kodu enjekte et"},backup:{includesEncryptionKey:"Yerel yedekler, yedek ZIP'nin kendi içinde tamamlanmış olması için MFA şifreleme anahtarı dosyasını (DATA_DIR/.mfa_encryption_key) içerir. ZIP'yi hassas olarak değerlendirin — dosyaya sahip olan herkes içinde saklanan OIDC istemci gizli anahtarlarını ve TOTP gizli anahtarlarını çözebilir.",title:"Yedekleme ve Geri Yükleme",createBackup:"Yedek Oluştur",restoreBackup:"Yedeği Geri Yükle",restoreDescription:"Tüm verileri bir yedek dosyasından değiştir",downloadBackup:"Yedeği İndir",uploadBackup:"Yedek Yükle",lastBackup:"Son Yedek",autoBackup:"Otomatik Yedekleme",backupNow:"Şimdi Yedekle",restoreWarning:"Uyarı: Bir yedeği geri yüklemek tüm mevcut verilerin üzerine yazacak.",includeArchives:"Arşivleri Dahil Et",includeSettings:"Ayarları Dahil Et",includeProfiles:"Profilleri Dahil Et",backupSuccess:"Yedek başarıyla oluşturuldu",restoreSuccess:"Yedek başarıyla geri yüklendi",backupFailed:"Yedekleme başarısız",restoreFailed:"Geri yükleme başarısız",restoreNote:"Geri yükleme sırasında Sanal Yazıcı durdurulacak",githubBackup:"Git Yedekleme",enabled:"Etkin",cloudLoginRequired:"Bambu Cloud girişi gerekli. GitHub yedeklemesini etkinleştirmek için Profiller → Bulut Profilleri altında giriş yapın.",cloudLoginRequiredShort:"Bulut girişi gerekli",githubDescription:"Yedekleme ve sürüm geçmişi için profillerinizi otomatik olarak özel bir GitHub deposuna senkronize et.",repoIsPrivate:"Depo özel — yedeklemek için güvenli.",repoIsPublicWarning:"Depo HERKESE AÇIK. Bambuddy yedekleri MQTT kimlik bilgilerini, Home Assistant belirteçlerini, Prometheus belirteçlerini, Bambu Cloud e-postanızı ve K-profilleri aracılığıyla yazıcı erişim kodlarını içerir. Sağlayıcınızın ayarlarında depoyu özel hale getirene kadar kaydetme engellenir.",repoVisibilityUnknown:"Depo görünürlüğü belirlenemedi. Bambuddy, özel olarak onaylanmamış hiçbir şeye yedekleme yapmayı reddeder; kaydetme engellenecek.",repositoryUrl:"Depo URL'si",repoUrlPlaceholderGitHub:"https://github.com/username/repo-name",repoUrlPlaceholderGitea:"https://gitea.example.com/username/repo-name",repoUrlPlaceholderForgejo:"https://forgejo.example.com/username/repo-name",repoUrlPlaceholderGitLab:"https://gitlab.com/username/repo-name",allowInsecureHttp:"Güvensiz HTTP'ye izin ver",allowInsecureHttpHint:"TLS olmadan özel ağlarda kendi barındırılan örnekler için etkinleştir",personalAccessToken:"Kişisel Erişim Belirteci",tokenSaved:"(kaydedildi)",enterNewToken:"Güncellemek için yeni belirteç girin",tokenHint:"Contents okuma/yazma izni olan ayrıntılı belirteç",branch:"Dal",provider:"Git Sağlayıcısı",providerGitHub:"GitHub",providerGitLab:"GitLab",providerGitea:"Gitea",providerForgejo:"Forgejo",manualOnly:"Yalnızca manuel",hourly:"Saatlik",daily:"Günlük",weekly:"Haftalık",includeInBackup:"Yedeğe dahil et",kProfiles:"K-Profilleri",kProfilesDescription:"Bağlı yazıcılardan basınç ilerleme kalibrasyonu",noPrintersConnected:"Bağlı yazıcı yok",printersConnected:"{{connected}}/{{total}} bağlı",cloudProfiles:"Bulut Profilleri",cloudProfilesDescription:"Bambu Cloud'dan filament, yazıcı ve işlem ön ayarları",appSettings:"Uygulama Ayarları",appSettingsDescription:"Bambuddy yapılandırması (tam veritabanı)",spoolInventory:"Makara Envanteri",spoolInventoryDescription:"Filament makaraları, kullanım geçmişi ve maliyet takibi",printArchives:"Baskı Arşivleri",printArchivesDescription:"Baskı geçmişi meta verileri (gcode/3MF dosyaları yok)",lastBackupAt:"Son yedek:",noBackupsYet:"Henüz yedek yok",next:"Sonraki:",startingBackup:"Yedekleme başlatılıyor...",test:"Test",enableBackup:"Yedeklemeyi Etkinleştir",testConnection:"Bağlantıyı Test Et",enterRepoUrl:"Depo URL'sini girin",enterRepoAndToken:"Depo URL'si ve erişim belirteci girin",repoRequired:"Depo URL'si gerekli",tokenRequired:"Erişim belirteci gerekli",githubBackupEnabled:"GitHub yedeklemesi etkinleştirildi",tokenUpdated:"Belirteç güncellendi",settingsSaved:"Ayarlar kaydedildi",failedToSave:"Kaydedilemedi: {{message}}",backupCompleteFiles:"Yedekleme tamamlandı - {{count}} dosya güncellendi",backupSkippedNoChanges:"Yedekleme atlandı - değişiklik yok",backupFailed2:"Yedekleme başarısız: {{message}}",clearedLogs:"{{count}} günlük temizlendi",failedToClearLogs:"Günlükler temizlenemedi: {{message}}",history:"Geçmiş",clear:"Temizle",date:"Tarih",status:"Durum",commit:"Commit",localBackup:"Yerel Yedekleme",localBackupDescription:"Veritabanı, arşivler, yüklemeler ve tüm dosyalar dahil Bambuddy verilerinizin tam bir yedeğini oluşturun.",downloadBackupLabel:"Yedeği İndir",completeBackupZip:"Tam yedek: veritabanı + tüm dosyalar (ZIP)",download:"İndir",preparingBackup:"Yedek hazırlanıyor...",creatingArchive:"Yedek arşivi oluşturuluyor... Büyük arşivler için bu biraz zaman alabilir.",downloadingFile:"Yedek dosyası indiriliyor...",backupDownloaded:"Yedek başarıyla indirildi",failedToCreateBackup:"Yedek oluşturulamadı: {{message}}",restore:"Geri Yükle",restoreReplacesAll:"Geri yükleme tüm verilerin yerine geçer.",restoreReplacesAllDetail:"Mevcut veritabanınız ve dosyalarınız tamamen değiştirilecek. Geri yüklemeden sonra yeniden başlatma gerekli.",restoreConfirmTitle:"Yedeği Geri Yükle",restoreConfirmMessage:'"{{filename}}" dosyasından geri yüklemek istediğinizden emin misiniz? Bu, mevcut veritabanınızı ve tüm dosyaları tamamen değiştirecek. Geri yüklemeden sonra uygulamanın yeniden başlatılması gerekecek.',restoreConfirmButton:"Yedeği Geri Yükle",uploadingFile:"Yedek dosyası yükleniyor...",backupRestoredRestart:"Yedek geri yüklendi. Lütfen Bambuddy'yi yeniden başlatın.",failedToRestore:"Yedek geri yüklenemedi. Lütfen dosya formatını kontrol edin.",reloadNow:"Şimdi Yeniden Yükle",creatingBackup:"Yedek Oluşturuluyor",restoringBackup:"Yedek Geri Yükleniyor",preparing:"Hazırlanıyor...",processing:"İşleniyor...",doNotClosePage:"Lütfen bu sayfayı kapatmayın veya başka bir yere gitmeyin. Büyük yedekler için bu işlem birkaç dakika sürebilir.",restoring:"Geri yükleniyor...",restoreComplete:"Geri Yükleme Tamamlandı",restoreFailed2:"Geri Yükleme Başarısız",importSettings:"Ayarları bir yedek dosyasından içe aktar",pleaseWaitRestoring:"Verileriniz geri yüklenirken lütfen bekleyin",selectBackupFile:"Yedek dosyası seçmek için tıklayın (.json veya .zip)",duplicateHandling:"Yinelenen yönetiminin nasıl çalıştığı:",matchPrinters:"Yazıcılar",matchPrintersBy:"seri numarasına göre eşleşti",matchSmartPlugs:"Akıllı Prizler",matchSmartPlugsBy:"IP adresine göre eşleşti",matchNotificationProviders:"Bildirim Sağlayıcıları",matchNotificationProvidersBy:"ada göre eşleşti",matchFilaments:"Filamentler",matchFilamentsBy:"ad + tür + markaya göre eşleşti",matchArchives:"Arşivler",matchArchivesBy:"içerik hash'ine göre eşleşti (her zaman atlanır)",matchPendingUploads:"Bekleyen Yüklemeler",matchPendingUploadsBy:"dosya adına göre eşleşti",matchSettingsTemplates:"Ayarlar ve Şablonlar",matchSettingsTemplatesBy:"her zaman üzerine yazılır",replaceExisting:"Mevcut veriyi değiştir",keepExisting:"Mevcut veriyi koru",overwriteDescription:"Zaten mevcut olan öğeleri yedek verisiyle üzerine yaz",keepDescription:"Yalnızca zaten mevcut olmayan öğeleri geri yükle",overwriteCaution:"Dikkat:",overwriteWarning:"Üzerine yazma, mevcut yapılandırmalarınızı yedekten gelen verilerle değiştirecek. Güvenlik için yazıcı erişim kodları asla üzerine yazılmaz.",cancel:"İptal",processingBackup:"Yedek dosyası işleniyor...",itemsRestored:"Geri Yüklenen Öğeler",itemsSkipped:"Atlanan Öğeler",restored:"Geri yüklendi",skippedAlreadyExist:"Atlandı (zaten mevcut)",filesCategory:"Dosyalar (3MF, küçük resimler, vb.)",andMore:"...ve {{count}} daha",newApiKeysGenerated:"Yeni API Anahtarları Oluşturuldu",keysShownOnce:"Bu anahtarlar yalnızca bir kez gösterilir. Şimdi kopyalayın!",copy:"Kopyala",noDataFound:"Yedek dosyasında geri yüklenecek veri bulunamadı.",close:"Kapat",scheduledBackup:"Zamanlanmış Yedekler",scheduledBackupDescription:"Zamanlamaya göre otomatik olarak yedek anlık görüntüleri oluşturun. Çıktı dizini bir NAS veya harici depolama alanına bağlanabilir.",frequency:"Sıklık",backupTime:"Saat",retention:"Saklama",retentionDescription:"Saklanacak yedek sayısı",outputPath:"Çıktı Yolu",outputPathPlaceholder:"Varsayılan: {{path}}",outputPathDescription:"Varsayılan konum için boş bırakın",runNow:"Şimdi Çalıştır",backupFiles:"Yedek Dosyaları",noScheduledBackups:"Henüz yedek yok",deleteBackup:"Sil",deleteBackupConfirm:"Bu yedek dosyası silinsin mi?",backupRunning:"Yedekleme devam ediyor...",scheduledBackupComplete:"Yedekleme başarıyla tamamlandı",scheduledBackupFailed:"Yedekleme başarısız",nextBackup:"Sonraki yedek",backupSize:"Boyut",localTimeHint:"Yerel saat ({{tz}})",defaultPathLabel:"Varsayılan:",categories:{settings:"Ayarlar",notification_providers:"Bildirim Sağlayıcıları",notification_templates:"Bildirim Şablonları",smart_plugs:"Akıllı Prizler",printers:"Yazıcılar",filaments:"Filamentler",maintenance_types:"Bakım Türleri",archives:"Arşivler",projects:"Projeler",pending_uploads:"Bekleyen Yüklemeler",external_links:"Harici Bağlantılar",api_keys:"API Anahtarları"}},tags:{title:"Etiketler",addTag:"Etiket Ekle",editTag:"Etiketi Düzenle",deleteTag:"Etiketi Sil",tagName:"Etiket Adı",tagColor:"Etiket Rengi",noTags:"Etiket yok",deleteConfirm:"Bu etiketi silmek istediğinizden emin misiniz?",manageTags:"Etiketleri Yönet"},uploadModal:{title:"3MF Dosyalarını Yükle",dragDrop:".3mf dosyalarını buraya sürükleyip bırakın",or:"veya",browseFiles:"Dosyalara Göz At",extractionInfo:"Yazıcı modeli, 3MF dosya meta verilerinden otomatik olarak çıkarılacak.",uploaded:"yüklendi",failed:"başarısız",uploading:"Yükleniyor...",upload:"Yükle",uploadFailed:"Yükleme başarısız"},editArchive:{title:"Arşivi Düzenle",name:"Ad",namePlaceholder:"Baskı adı",printer:"Yazıcı",noPrinter:"Yazıcı yok",project:"Proje",noProject:"Proje yok",itemsPrinted:"Yazdırılan Öğeler",itemsPrintedHelp:"Bu baskı işinde üretilen öğe sayısı",notes:"Notlar",notesPlaceholder:"Bu baskı hakkında notlar ekleyin...",externalLink:"Harici Bağlantı",externalLinkPlaceholder:"https://printables.com/model/...",externalLinkHelp:"Printables, Thingiverse veya başka bir kaynağa bağlantı",tags:"Etiketler",tagsPlaceholder:"Etiketler ekle...",addMoreTags:"Daha fazla etiket ekle...",matchingTags:'"{{query}}" ile eşleşen',existingTags:"Mevcut etiketler",clickToAdd:"(eklemek için tıklayın)",status:"Durum",failureReason:"Başarısızlık Nedeni",selectReason:"Neden seç...",photos:"Yazdırılan Sonuç Fotoğrafları",photosHelp:"Yazdırılan sonuçunuzun fotoğraflarını eklemek için + tıklayın",printResult:"Baskı sonucu",saving:"Kaydediliyor...",failureReasons:{adhesionFailure:"Yapışma başarısız",spaghettiDetached:"Spagetti / Ayrılmış",layerShift:"Katman kayması",cloggedNozzle:"Tıkalı nozul",filamentRunout:"Filament bitti",warping:"Bükülme",stringing:"İplik oluşumu",underExtrusion:"Az ekstrüzyon",powerFailure:"Güç kesintisi",userCancelled:"Kullanıcı iptal etti",other:"Diğer"},statuses:{completed:"Tamamlandı",failed:"Başarısız",aborted:"İptal edildi",printing:"Yazdırılıyor"}},kProfiles:{title:"K-Profilleri",noPrintersConfigured:"Yapılandırılmış Yazıcı Yok",addPrinterInSettings:"K-profillerini yönetmek için Ayarlarda bir yazıcı ekleyin",noActivePrinters:"Aktif Yazıcı Yok",enablePrinterConnection:"K-profillerini görüntülemek için bir yazıcı bağlantısını etkinleştirin",loadingProfiles:"K-Profilleri yükleniyor...",printerOffline:"Yazıcı Çevrimdışı",printerOfflineDesc:"Seçilen yazıcı bağlı değil. K-profillerini görüntülemek için açın.",noMatchingProfiles:"Eşleşen Profil Yok",noMatchingProfilesDesc:"Arama kriterlerinizle eşleşen profil yok",noKProfiles:"K-Profili Yok",noKProfilesDesc:"{{diameter}}mm nozul için basınç ilerleme profili bulunamadı",createFirstProfile:"İlk Profili Oluştur",printer:"Yazıcı",nozzle:"Nozul",refresh:"Yenile",addProfile:"Profil Ekle",export:"Dışa Aktar",import:"İçe Aktar",select:"Seç",selectAll:"Tümünü Seç",delete:"Sil",searchPlaceholder:"Ad veya filamente göre ara...",allExtruders:"Tüm Ekstrüderler",leftOnly:"Yalnızca Sol",rightOnly:"Yalnızca Sağ",allFlow:"Tüm Akış",hfOnly:"Yalnızca HF",sOnly:"Yalnızca S",sortName:"Sırala: Ad",sortKValue:"Sırala: K-Değeri",sortFilament:"Sırala: Filament",leftExtruder:"Sol Ekstrüder",rightExtruder:"Sağ Ekstrüder",modal:{addTitle:"K-Profili Ekle",editTitle:"K-Profilini Düzenle",profileName:"Profil Adı",profileNamePlaceholder:"PLA Profilim",kValue:"K-Değeri",kValuePlaceholder:"0.020",kValueHelp:"Tipik aralık: PLA için 0.01 - 0.06, PETG için 0.02 - 0.10",filament:"Filament",selectFilament:"Filament seç...",noFilamentsHelp:"Filament bulunamadı. Önce Bambu Studio'da bir K-profili oluşturun.",flowType:"Akış Türü",highFlow:"Yüksek Akış",standard:"Standart",nozzleSize:"Nozul Boyutu",extruder:"Ekstrüder",extruders:"Ekstrüderler",left:"Sol",right:"Sağ",notes:"Notlar (yerel olarak saklanır)",notesPlaceholder:"Bu profil hakkında notlar ekleyin...",notesHelp:"Notlar yazıcıda değil, Bambuddy'de kaydedilir",syncing:"Yazıcıyla senkronize ediliyor...",savingExtruder:"Ekstrüdere kaydediliyor {{current}}/{{total}}...",pleaseWait:"Lütfen bekleyin"},deleteConfirm:{title:"Profili Sil",cannotUndo:"Bu geri alınamaz",message:'"{{name}}" yazıcıdan silmek istediğinizden emin misiniz?'},bulkDelete:{title:"Profilleri Sil",cannotUndo:"Bu geri alınamaz",message:"Yazıcıdan seçili {{count}} profili silmek istediğinizden emin misiniz?"},toast:{profileSaved:"K-profili kaydedildi",profilesSaved:"{{count}} ekstrüdere K-profili kaydedildi",selectAtLeastOneExtruder:"Lütfen en az bir ekstrüder seçin",profileDeleted:"K-profili silindi",profilesDeleted:"{{count}} profil silindi",exportedProfiles:"{{count}} profil dışa aktarıldı",importedProfiles:"{{total}} profilden {{count}} tanesi içe aktarıldı",noProfilesToExport:"Dışa aktarılacak profil yok",invalidFileFormat:"Geçersiz dosya formatı",failedToParseImport:"İçe aktarma dosyası ayrıştırılamadı",failedToSaveBatch:"K-profilleri kaydedilemedi",noteSaved:"Not kaydedildi",failedToSaveNote:"Not kaydedilemedi"},permission:{noRead:"Profilleri yenileme izniniz yok",noCreate:"Profil ekleme izniniz yok",noUpdate:"K-profillerini güncelleme izniniz yok",noDelete:"K-profillerini silme izniniz yok",noExport:"Profilleri dışa aktarma izniniz yok",noImport:"Profilleri içe aktarma izniniz yok"}},virtualPrinter:{title:"Sanal Yazıcı",running:"Çalışıyor",stopped:"Durduruldu",description:{default:"Bambu Studio ve OrcaSlicer'da görünen bir sanal yazıcı etkinleştirin. Bu yazıcıya gönderilen dosyalar yazdırılmadan doğrudan arşivlenecek.",proxy:"Dilimleyici trafiğini gerçek bir yazıcıya ileten bir proxy etkinleştirin, böylece herhangi bir ağ üzerinden uzaktan baskı yapabilirsiniz."},enable:{title:"Sanal Yazıcıyı Etkinleştir",visibleInSlicer:'Dilimleyici keşfinde "Bambuddy" olarak görünür',proxyingTo:"{{name}} cihazına proxy yapılıyor",notActive:"Aktif değil"},model:{title:"Yazıcı Modeli",description:"Öykünülecek yazıcı modelini seçin.",restartWarning:"Modeli değiştirmek sanal yazıcıyı yeniden başlatacak"},accessCode:{title:"Erişim Kodu",isSet:"Erişim kodu ayarlandı",notSet:"Erişim kodu ayarlanmadı - etkinleştirmek için gerekli",placeholder:"8 karakterli kodu girin",placeholderChange:"Değiştirmek için yeni kodu girin",hint:"Tam olarak 8 karakter olmalı. Dilimleyiciler tarafından kimlik doğrulama için kullanılır.",charCount:"({{count}}/8)"},targetPrinter:{title:"Hedef Yazıcı",configured:"Proxy hedefi yapılandırıldı",notConfigured:"Hedef yazıcı seçilmedi - proxy modu için gerekli",placeholder:"Bir yazıcı seçin...",hint:"Dilimleyici trafiğine proxy yapmak için yazıcıyı seçin. Yazıcı LAN modunda olmalıdır.",noPrinters:"Yapılandırılmış yazıcı yok. Proxy modunu kullanmak için önce bir yazıcı ekleyin."},remoteInterface:{title:"Ağ Arayüzü Geçersiz Kılma",configured:"Arayüz geçersiz kılma aktif",optional:"İsteğe bağlı - otomatik algılanan IP yanlışsa kullanın (örn. birden fazla NIC, Docker, VPN)",placeholder:"Otomatik algıla (varsayılan)...",hint:"SSDP üzerinden tanıtılan ve TLS sertifikasında kullanılan IP adresini geçersiz kıl. Bambuddy birden fazla ağ arayüzüne sahip olduğunda kullanışlıdır."},mode:{title:"Mod",archive:"Arşiv",archiveDesc:"Dosyaları hemen arşivle",review:"İnceleme",reviewDesc:"Arşivlemeden önce incele",queue:"Kuyruk",queueDesc:"Arşivle ve kuyruğa ekle",proxy:"Proxy",proxyDesc:"Gerçek yazıcıya ilet"},autoDispatch:{title:"Otomatik sevk",description:"Kuyruğa eklendiğinde baskıları otomatik olarak başlat. Kapalıyken, baskılar manuel sevki bekler."},queueForceColorMatch:{title:"Renk eşleşmesini zorla",description:"Tam olarak doğru filament türü ve rengi yüklü olmayan bir yazıcıya sevk etmeyi reddet. Varsayılan olarak kapalı — bu olmadan kuyruk yalnızca model eşleşmesi kullanır ve yanlış renk yüklü bir yazıcı seçebilir."},tailscaleDisabled:{title:"Tailscale entegrasyonu",description:"Bu VP'yi Tailscale üzerinden açıkta olarak işaretlemek için etkinleştirin. Dilimleyiciye hangi IP'yi yapıştıracağınızı bilmeniz için ana bilgisayarın Tailscale adresini gösterir. CA içe aktarma adımı değişmedi — bu anahtarın sertifikalar üzerinde etkisi yoktur."},setupRequired:{title:"Kurulum Gerekli",description:"Sanal yazıcı özelliği çalışmadan önce ek sistem yapılandırması gerektirir. Bu, port yönlendirme, güvenlik duvarı kuralları ve platforma özgü ayarları içerir.",readGuide:"Etkinleştirmeden önce kurulum kılavuzunu okuyun"},archiveNameSource:{title:"Arşiv ad kaynağı",description:`Dosyalar sanal yazıcı aracılığıyla geldiğinde yeni arşivlerin nasıl adlandırılacağını seçin. "Meta veri" 3MF'den dilimleyici-gömülü başlığı kullanır (varsayılan). "Dosya adı" Bambu Studio'nun FTP üzerinden gönderdiği dosya adını kullanır — "yazıcıya gönder" iletişim kutusunda işi yeniden adlandırdıysanız kullanışlıdır.`,metadata:"Meta veri",filename:"Dosya adı"},caCert:{title:"Dilimleyici sertifikası",description:"Sanal yazıcılar Bambuddy CA tarafından imzalanmış bir TLS sertifikası kullanır. Bağlantıyı kabul etmesi için bu CA sertifikasını dilimleyicinizin güven deposuna bir kez içe aktarın — komut satırından kopyalamaya gerek yok.",copy:"Kopyala",copied:"Kopyalandı",download:"İndir",fingerprint:"SHA-256"},howItWorks:{title:"Nasıl çalışır",step1:"Aynı LAN'da, sanal yazıcılar dilimleyicinizde (Bambu Studio / OrcaSlicer) keşif yoluyla otomatik olarak görünür. Diğer ağlardan, IP adresi ve erişim koduyla manuel olarak ekleyin.",step2:`3MF dosyalarını Bambuddy'ye yüklemek için Arşiv, İnceleme ve Kuyruk modlarında dilimleyicinizdeki "Gönder" düğmesini kullanın. Dilimleyici "Baskı başarılı" gösterecek — dosya saklanır, yazdırılmaz.`,step3:"Proxy modunda, sanal yazıcı tüm trafiği gerçek bir yazıcıya iletir — baskılar doğrudan bağlıymış gibi hemen başlar."},status:{title:"Durum Ayrıntıları",printerName:"Yazıcı Adı",model:"Model",serialNumber:"Seri Numarası",mode:"Mod",pendingFiles:"Bekleyen Dosyalar",targetPrinter:"Hedef Yazıcı",ftpPort:"FTP Portu",mqttPort:"MQTT Portu",ftpConnections:"FTP Bağlantıları",mqttConnections:"MQTT Bağlantıları"},toast:{updated:"Sanal yazıcı ayarları güncellendi",failedToUpdate:"Ayarlar güncellenemedi",copyFailed:"Kopyalama başarısız — metni manuel olarak seçmeyi deneyin",accessCodeRequired:"Lütfen önce bir erişim kodu ayarlayın",targetPrinterRequired:"Lütfen önce bir hedef yazıcı seçin",bindIpRequired:"Lütfen önce bir bind IP'si ayarlayın",accessCodeEmpty:"Erişim kodu boş olamaz",accessCodeLength:"Erişim kodu tam olarak 8 karakter olmalı",created:"Sanal yazıcı oluşturuldu",failedToCreate:"Sanal yazıcı oluşturulamadı",deleted:"Sanal yazıcı silindi",failedToDelete:"Sanal yazıcı silinemedi"},list:{title:"Sanal Yazıcılar",add:"Ekle",addFirst:"Sanal Yazıcı Ekle",empty:"Yapılandırılmış sanal yazıcı yok. Başlamak için bir tane ekleyin."},bindIp:{title:"Bind Arayüzü",placeholder:"Arayüz seç...",hint:"Bu sanal yazıcının bağlanacağı ağ arayüzü. Yazıcı başına benzersiz olmalıdır."},proxy:{accessCodeHint:"Proxy modunda, dilimleyicide hedef yazıcınızın erişim kodunu kullanın. Bağlantı şeffaf olarak gerçek yazıcıya iletilir."},addDialog:{title:"Sanal Yazıcı Ekle",name:"Ad",hint:"Oluşturduktan sonra erişim kodunu, hedef yazıcıyı ve diğer ayarları yapılandırabilirsiniz.",create:"Oluştur"},deleteConfirm:{title:"Sanal Yazıcıyı Sil",message:'"{{name}}" silmek istediğinizden emin misiniz? Bu, bu yazıcı için tüm servisleri durduracak.'}},modelViewer:{openInSlicer:"Dilimleyicide Aç",tabs:{model:"3B Model",gcode:"G-kod Önizleme"},notAvailable:"mevcut değil",notSliced:"dilimlenmemiş",plates:"Plakalar",allPlates:"Tüm Plakalar",plateNumber:"Plaka {{number}}",plateCount:"{{count}} plaka",plateCount_other:"{{count}} plaka",objectCount:"{{count}} nesne",objectCount_other:"{{count}} nesne",filamentCount:"{{count}} filament",filamentCount_other:"{{count}} filament",eta:"ETA {{minutes}} dk",noPreview:"Bu dosya için önizleme yok",pagination:{pageOf:"{{total}} sayfadan {{current}} tanesi",prev:"Önceki",next:"Sonraki"},errors:{failedToLoad:"Dosya yüklenemedi",noMeshes:"3MF dosyasında ağ bulunamadı",unsupportedFormat:"Desteklenmeyen dosya formatı"}},maintenanceDescriptions:{lubricateCarbonRods:"Düzgün hareket için karbon çubuklara yağ uygula",lubricateRails:"Düzgün hareket için lineer raylara yağ uygula",cleanNozzle:"Tıkanmaları önlemek için hotend ve nozulu temizle",checkBelts:"Doğru baskılar için kayış gerginliğini kontrol et",cleanBuildPlate:"Daha iyi yapışma için baskı plakasını temizle",checkExtruder:"Aşınma için ekstrüder dişlilerini inceleyin",checkCooling:"Soğutma fanlarının düzgün çalıştığından emin ol",generalInspection:"Genel yazıcı denetimi",cleanCarbonRods:"Sürtünmeyi azaltmak için karbon çubukları temizle",lubricateSteelRods:"Düzgün hareket için çelik çubuklara yağ uygula",cleanSteelRods:"Sürtünmeyi azaltmak için çelik çubukları temizle",cleanLinearRails:"Toz ve kalıntıları temizlemek için lineer rayları sil",checkPtfeTube:"Aşınma veya hasar için PTFE tüpünü incele",replaceHepaFilter:"Hava kalitesi için HEPA filtresini değiştir",replaceCarbonFilter:"Aktif karbon filtresini değiştir",lubricateLeftNozzleRail:"Sol nozul rayını yağla (H2 serisi)"},smartPlugs:{offline:"Çevrimdışı",admin:"Yönetici",openPlugAdminPage:"Priz yönetici sayfasını aç",deleteSmartPlug:"Akıllı Prizi Sil",turnOnSmartPlug:"Akıllı Prizi Aç",turnOffSmartPlug:"Akıllı Prizi Kapat",turnOn:"Aç",turnOff:"Kapat",addSmartPlug:{scanningNetwork:"Ağ taranıyor...",chooseEntity:"Bir varlık seçin...",connectionFailed:"Bağlantı başarısız",searchEntities:"Varlıklarda ara...",searchPowerSensors:"Güç sensörlerinde ara...",searchEnergySensors:"Enerji sensörlerinde ara...",placeholders:{plugName:"Oturma Odası Prizi",mqttStateOnValue:"ON, true, 1",mqttSameAsPower:"Güç konusuyla aynı veya farklı"}},linkedTo:"Bağlı:",monitorOnly:"Yalnızca İzle",alerts:"Uyarılar",scheduleOn:"{{time}} Açık",scheduleOff:"{{time}} Kapalı",on:"Açık",off:"Kapalı",power:"Güç",kwhToday:"Bugün kWh",settings:"Ayarlar",automationSettings:"Otomasyon Ayarları",showInSwitchbar:"Anahtar Çubuğunda Göster",quickAccessSidebar:"Kenar çubuğundan hızlı erişim",enabled:"Etkin",enableAutomation:"Bu priz için otomasyonu etkinleştir",autoOn:"Otomatik Aç",autoOnDescription:"Baskı başladığında aç",autoOff:"Otomatik Kapat",autoOffDescription:"Baskı tamamlandığında kapat (tek seferlik)",autoOffPersistent:"Etkin Tut",autoOffPersistentDescription:"Tek seferlik yerine baskılar arasında etkin kal",autoOffAfterDrying:"Kurutmadan Sonra Otomatik Kapat",autoOffAfterDryingDescription:"AMS kurutması tamamlandığında kapat",delayAfterDryingMinutes:"Kurutma gecikmesi (dakika)",turnOffDelayMode:"Kapatma Gecikme Modu",time:"Süre",temp:"Sıcaklık",delayMinutes:"Gecikme (dakika)",tempThreshold:"Sıcaklık eşiği (°C)",tempThresholdDescription:"Nozul bu sıcaklığın altına soğuduğunda kapanır",edit:"Düzenle",deleteConfirm:'"{{name}}" silmek istediğinizden emin misiniz? Bu geri alınamaz.',turnOnConfirm:'"{{name}}" açmak istediğinizden emin misiniz?',turnOffConfirm:'"{{name}}" kapatmak istediğinizden emin misiniz? Bu, bağlı cihazın gücünü kesecek.',failedToTurn:'"{{name}}" {{action}} başarısız',unknown:"Bilinmiyor",addTitle:"Akıllı Priz Ekle",editTitle:"Akıllı Prizi Düzenle",stopScanning:"Taramayı Durdur",discoverTasmota:"Tasmota Cihazlarını Keşfet",foundDevices:"{{count}} cihaz bulundu - seçmek için tıklayın:",noDevicesFound:"Ağınızda Tasmota cihazı bulunamadı",haNotConfigured:"Home Assistant yapılandırılmamış. Şuradan ayarlayın:",haSettingsPath:"Ayarlar → Ağ → Home Assistant",selectEntity:"Varlık Seç *",ipAddress:"IP Adresi *",nameLabel:"Ad *",username:"Kullanıcı Adı",password:"Parola",authHint:"Tasmota cihazınız kimlik doğrulama gerektirmiyorsa boş bırakın",linkToPrinter:"Yazıcıya Bağla",noPrinter:"Yazıcı yok (yalnızca manuel kontrol)",linkingDescription:"Bağlama, baskılar başladığında/tamamlandığında otomatik açma/kapamayı etkinleştirir",powerAlerts:"Güç Uyarıları",alertAbove:"Üstündeyse uyar (W)",alertBelow:"Altındaysa uyar (W)",alertDescription:"Güç tüketimi bu eşikleri geçtiğinde bildirim alın. O yönü devre dışı bırakmak için boş bırakın.",dailySchedule:"Günlük Zamanlama",turnOnAt:"Şu saatte aç",turnOffAt:"Şu saatte kapat",scheduleDescription:"Prizi günlük olarak bu saatlerde otomatik aç/kapat. O eylemi atlamak için boş bırakın.",showOnPrinterCard:"Yazıcı Kartında Göster",displayOnPrinterCard:"Yazıcı kartında düğme göster",connectedResult:"Bağlandı!",deviceLabel:"Cihaz: {{name}} - ",stateLabel:"Durum: {{state}}",test:"Test",delete:"Sil",save:"Kaydet",add:"Ekle",cancel:"İptal",failedToStartScan:"Tarama başlatılamadı",nameRequired:"Ad gerekli",entityRequired:"Home Assistant prizleri için varlık gerekli",mqttTopicRequired:"Güç, enerji veya durum izleme için en az bir MQTT konusu yapılandırılmalı",loadingEntities:"Varlıklar yükleniyor...",loading:"Yükleniyor...",failedToLoadEntities:"Varlıklar yüklenemedi: {{error}}",noEntitiesMatching:'"{{search}}" ile eşleşen varlık bulunamadı',noEntitiesAvailable:"Kullanılabilir varlık yok",searchingEntities:"Tüm varlıklar aranıyor ({{count}} bulundu)",showingEntities:"switch, light, input_boolean gösteriliyor ({{count}} mevcut)",energyMonitoringOptional:"Enerji İzleme (İsteğe Bağlı)",energyMonitoringHint:"Güç/enerji verisi sağlayan sensörleri arayın ve seçin.",powerSensorW:"Güç Sensörü (W)",energyTodayKwh:"Bugünkü Enerji (kWh)",totalEnergyKwh:"Toplam Enerji (kWh)",noMatchingSensors:"Eşleşen sensör yok",none:"Hiçbiri",mqttNotConfigured:"MQTT brokerı yapılandırılmamış. Şurada broker adresini ayarlayın:",mqttSettingsPath:"Ayarlar → Ağ → MQTT Yayınlama",mqttNotConfiguredSuffix:"(yayınlamayı etkinleştirmenize gerek yok, yalnızca broker ayrıntılarını doldurun).",mqttMonitorOnlyDescription:"MQTT prizleri MQTT aboneliği aracılığıyla güç/enerji verisi alır. Açma/kapama kontrolü kullanılamaz - MQTT brokerınızı veya ev otomasyon sisteminizi kullanın.",powerMonitoring:"Güç İzleme",energyMonitoring:"Enerji İzleme",stateMonitoring:"Durum İzleme",optional:"isteğe bağlı",topic:"Konu",jsonPath:"JSON Yolu",multiplier:"Çarpan",onValue:"ON Değeri",mqttPowerHint:`JSON yolu JSON yükten değer çıkarır (örn., "power_l1"). Konu ham sayısal değerler yayınlıyorsa boş bırakın.
+ON值：表示"ON"的確切字串。留空以自動檢測（ON、true、1）。`,restControl:"控制",restOnUrl:"開啟 URL",restOffUrl:"關閉 URL",restOnBody:"開啟請求內容",restOffBody:"關閉請求內容",restMethod:"HTTP 方法",restHeaders:"自訂標頭（JSON）",restStatusUrl:"狀態 URL",restStatusPath:"狀態 JSON 路徑",restStatusOnValue:"ON 值",restPowerUrl:"功率URL",restPowerPath:"功率 JSON 路徑",restPowerMultiplier:"功率乘數",restEnergyUrl:"能耗URL",restEnergyPath:"能耗 JSON 路徑",restEnergyMultiplier:"能耗乘數",restUrlRequired:"REST 插座至少需要一個 URL（ON 或 OFF）",restHeadersHint:'例如：{"Authorization": "Bearer your-token"}',restBodyHint:'例如：ON、{"state": "on"}',restStatusHint:"用於輪詢目前狀態的 URL",restPathHint:"例如：state 或 data.power.status",restPowerUrlHint:"功率資料的獨立URL（留空則使用狀態URL）",restEnergyUrlHint:"能耗資料的獨立URL（留空則使用狀態URL）",restEnergyHint:"每個值可以使用獨立的URL，或回退到狀態 URL。使用乘數進行單位轉換（例如：0.001 將 Wh 轉換為 kWh）。",testConnection:"測試連線",connectionSuccess:"連線成功",noSwitchesInSwitchbar:"開關欄中沒有開關",enableSwitchbarHint:'在設定 > 智慧插座中啟用"在開關欄顯示"'},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"電子郵件",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"SMTP 電子郵件通知",telegram:"透過 Telegram 機器人傳送通知",discord:"透過 Webhook 傳送到 Discord 頻道",ntfy:"免費、可自託管的推送通知",pushover:"簡單、可靠的推送通知",callmebot:"透過 CallMeBot 免費傳送 WhatsApp 通知",webhook:"通用 HTTP POST 到任意 URL",homeassistant:"Home Assistant 儀表板中的持久通知"},lastSuccess:"上次：{{date}}",error:"錯誤",printer:"印表機：",allPrinters:"所有印表機",sendTestNotification:"傳送測試通知",eventSettings:"事件設定",enabled:"已啟用",sendFromProvider:"從此提供者傳送通知",printEvents:"列印事件",printerStatus:"印表機狀態",amsAlarms:"AMS 警報",amsHtAlarms:"AMS-HT 警報",printQueue:"列印佇列",start:"開始",plateCheck:"熱床檢測",complete:"完成",failed:"失敗",stopped:"已停止",progress:"進度",offline:"離線",lowFilament:"耗材不足",maintenance:"維護",amsHumidity:"AMS 濕度",amsTemp:"AMS 溫度",amsHtHumidity:"AMS-HT 濕度",amsHtTemp:"AMS-HT 溫度",bedCooled:"熱床已冷卻",firstLayer:"首層完成",quiet:"免打擾",digest:"摘要 {{time}}",printStarted:"列印已開始",plateNotEmpty:"熱床非空",plateNotEmptyDescription:"列印前偵測到物體",printCompleted:"列印已完成",bedCooledLabel:"熱床已冷卻",bedCooledDescription:"列印後熱床溫度降至閾值以下",firstLayerCompleteLabel:"首層列印完成",firstLayerCompleteDescription:"首層完成時傳送帶照片的通知",missingSpoolAssignmentLabel:"缺少料卷分配",missingSpoolAssignmentDescription:"當列印開始且所需料盤沒有分配料卷時傳送通知",printFailed:"列印失敗",printStopped:"列印已停止",progressMilestones:"進度里程碑",progressMilestonesDescription:"在 25%、50%、75% 時通知",printerOffline:"印表機離線",printerError:"印表機錯誤",lowFilamentLabel:"耗材不足",maintenanceDue:"需要維護",maintenanceDueDescription:"需要維護時通知",amsHumidityHigh:"AMS 濕度過高",amsHumidityHighDescription:"普通 AMS 濕度超過閾值",amsTemperatureHigh:"AMS 溫度過高",amsTemperatureHighDescription:"普通 AMS 溫度超過閾值",amsHtHumidityHigh:"AMS-HT 濕度過高",amsHtHumidityHighDescription:"AMS-HT 濕度超過閾值",amsHtTemperatureHigh:"AMS-HT 溫度過高",amsHtTemperatureHighDescription:"AMS-HT 溫度超過閾值",inventoryAlerts:"庫存警報",stockReorderAlert:"補貨警報",stockReorderAlertDescription:"SKU 已達到補貨點",stockBreakAlert:"斷貨警報",stockBreakAlertDescription:"庫存將在補貨到達前耗盡",jobAdded:"任務已新增",jobAddedDescription:"任務已新增到佇列",jobAssigned:"任務已分配",jobAssignedDescription:"基於模型的任務已分配給印表機",jobStarted:"任務已開始",jobStartedDescription:"佇列任務已開始列印",jobWaiting:"任務等待中",jobWaitingDescription:"任務正在等待耗材或印表機",jobSkipped:"任務已跳過",jobSkippedDescription:"任務已跳過（上一個失敗）",jobFailed:"任務失敗",jobFailedDescription:"任務啟動失敗",queueComplete:"佇列已完成",queueCompleteDescription:"所有佇列任務已完成",quietHours:"免打擾時段",noNotificationsDuring:"在此時段內不傳送通知",editProviderToChangeQuietHours:"編輯提供者以更改免打擾時段",dailyDigest:"每日摘要",batchNotifications:"將通知彙總為每日摘要",sendAt:"傳送於 {{time}}",editProviderToChangeDigestTime:"編輯提供者以更改摘要時間",edit:"編輯",deleteProvider:"刪除通知提供者",deleteConfirm:'確定要刪除"{{name}}"嗎？此操作無法復原。',delete:"刪除",addTitle:"新增通知提供者",editTitle:"編輯通知提供者",nameLabel:"名稱 *",namePlaceholder:"我的通知",providerTypeLabel:"提供者類型 *",configuration:"設定",testConfiguration:"測試設定",printerFilter:"印表機篩選",onlyFromPrinter:"僅傳送來自此印表機的事件通知",quietHoursDnd:"免打擾時段",quietStart:"開始",quietEnd:"結束",dailyDigestLabel:"每日摘要",sendDigestAt:"傳送摘要於",digestCollected:"事件將被收集並在此時間作為單條摘要傳送",notificationEvents:"通知事件",progressPercent:"（25%、50%、75%）",bedCooledAfterPrint:"（列印完成後）",eventPriority:{sectionTitle:"ntfy 優先級",helpNtfy:"為每個已啟用的事件選擇優先級。ntfy 使用它來升級提醒（聲音、可見性、推播行為）。此處未設定的級別將使用 ntfy 伺服器預設值。",min:"最低",low:"低",default:"預設",high:"高",urgent:"緊急"},cancel:"取消",save:"儲存",add:"新增",nameRequired:"名稱為必填項",fieldRequired:"{{field}}為必填項",phoneNumber:"電話號碼",apiKey:"API 金鑰",serverUrl:"伺服器 URL",topic:"主題",authToken:"認證權杖",userKey:"使用者金鑰",appToken:"應用程式權杖",priority:"優先順序",botToken:"機器人權杖",chatId:"聊天 ID",smtpServer:"SMTP 伺服器",smtpPort:"SMTP 連接埠",security:"安全",authentication:"認證",username:"使用者名稱",password:"密碼",fromEmail:"寄件人信箱",toEmail:"收件人信箱",webhookUrl:"Webhook URL",payloadFormat:"負載格式",authorization:"授權",titleFieldName:"標題欄位名",messageFieldName:"訊息欄位名",editTemplate:"編輯範本：{{name}}",titleLabel:"標題",bodyLabel:"正文",titlePlaceholder:"通知標題...",bodyPlaceholder:"通知正文...",availableVariables:"可用變數",clickToInsert:"點選插入到正文游標位置",livePreview:"即時預覽",hide:"隱藏",show:"顯示",loadingPreview:"載入預覽中...",enterTemplateContent:"輸入範本內容以檢視預覽",titlePreview:"標題：",bodyPreview:"正文：",resetToDefault:"恢復預設",titleRequired:"標題為必填項",bodyRequired:"正文為必填項",notificationLog:"通知日誌",showFailedOnly:"僅顯示失敗",last24Hours:"最近 24 小時",last7Days:"最近 7 天",last30Days:"最近 30 天",last90Days:"最近 90 天",justNow:"剛剛",noFailedNotifications:"沒有失敗的通知",noNotificationsLogged:"沒有通知紀錄",unknownProvider:"未知提供者",logTitle:"標題",logMessage:"訊息",logError:"錯誤",logProvider:"提供者：{{type}}",logTime:"時間：{{time}}",refresh:"重新整理",clearOld:"清除舊紀錄",statsSummary:"最近 {{days}} 天：",statsNotifications:"條通知",statsSent:"{{count}} 條已傳送",statsFailed:"{{count}} 條失敗",eventTypes:{print_start:"列印已開始",print_complete:"列印完成",print_failed:"列印失敗",print_stopped:"列印已停止",print_progress:"進度",printer_offline:"印表機離線",printer_error:"印表機錯誤",filament_low:"耗材不足",maintenance_due:"需要維護",test:"測試"},userEmail:{title:"通知",emailNotifications:"郵件通知",emailNotificationsDesc:"接收您自己列印任務的郵件通知。郵件將透過進階身份驗證中設定的 SMTP 設定傳送。",sendingTo:"通知將傳送至",noEmailWarning:"您的帳戶沒有郵件地址。請聯絡管理員新增。",printJobNotifications:"列印任務通知",printJobNotificationsDesc:"選擇哪些事件會觸發您提交的列印任務的郵件通知。",printJobStarts:"列印任務開始",printJobStartsDesc:"當您的列印任務開始時收到通知。",printJobFinishes:"列印任務完成",printJobFinishesDesc:"當您的列印任務成功完成時收到通知。",printErrors:"列印錯誤",printErrorsDesc:"當您的列印任務失敗或遇到錯誤時收到通知。",printJobStops:"列印任務停止",printJobStopsDesc:"當您的列印任務被取消或停止時收到通知。",saveSuccess:"通知偏好設定已儲存。",saveError:"儲存通知偏好設定失敗。"}},richTextEditor:{bold:"粗體",italic:"斜體",underline:"底線",bulletList:"無序列表",numberedList:"有序列表",alignLeft:"左對齊",alignCenter:"居中對齊",alignRight:"右對齊",addLink:"新增連結",removeLink:"移除連結"},externalLinks:{noLinksConfigured:"未設定外部連結",deleteLink:"刪除連結",removeCustomIcon:"移除自訂圖示",openInNewTab:"在新標籤頁中開啟",placeholders:{linkName:"我的連結"}},keyboardShortcuts:{title:"鍵盤快捷鍵",navigation:"導航",archivesSection:"歸檔",kProfilesSection:"K 值設定",generalSection:"通用",shortcuts:{goToPrinters:"前往印表機",goToArchives:"前往歸檔",goToQueue:"前往佇列",goToStats:"前往統計",goToProfiles:"前往雲端設定",goToSettings:"前往設定",focusSearch:"聚焦搜尋",openUploadModal:"開啟上傳對話方塊",clearSelection:"清除選擇 / 取消焦點",contextMenu:"卡片右鍵選單",refreshProfiles:"重新整理設定",newProfile:"新增設定",exitSelectionMode:"結束選擇模式",showHelp:"顯示此協助"},footer:"按 Esc 或點選外部關閉"},notificationLog:{title:"通知日誌",events:{printStarted:"列印開始",printComplete:"列印完成",printFailed:"列印失敗",printStopped:"列印停止",progress:"進度",printerOffline:"印表機離線",printerError:"印表機錯誤",lowFilament:"耗材不足",maintenanceDue:"維護到期",test:"測試"},timeAgo:{justNow:"剛剛",minutesAgo:"{{minutes}} 分鐘前",hoursAgo:"{{hours}} 小時前"}},restoreBackup:{title:"恢復備份",restoring:"恢復中...",restoreComplete:"恢復完成",restoreFailed:"恢復失敗",importSettings:"從備份檔案匯入設定",pleaseWait:"請稍候，正在恢復您的資料",clickToSelect:"點選選擇備份檔案（.json 或 .zip）",howDuplicateHandling:"重複處理方式：",categories:{printers:"印表機",smartPlugs:"智慧插座",notificationProviders:"通知提供者",filaments:"耗材",archives:"歸檔",pendingUploads:"待處理上傳",settingsTemplates:"設定和範本"},matchingInfo:{printers:"按序列號匹配",smartPlugs:"按 IP 位址匹配",notificationProviders:"按名稱匹配",filaments:"按名稱 + 類型 + 品牌匹配",archives:"按內容雜湊匹配",pendingUploads:"按檔名匹配",settingsTemplates:"始終覆蓋"},replaceExisting:"替換現有資料",keepExisting:"保留現有資料",replaceDescription:"用備份資料覆蓋已存在的項目",keepDescription:"僅恢復不存在的項目",caution:"注意：",cautionText:"覆蓋將用備份資料替換您目前的設定。出於安全考慮，印表機存取碼永遠不會被覆蓋。",itemsRestored:"已恢復項目",itemsSkipped:"已跳過項目",restored:"已恢復",skipped:"已跳過（已存在）",filesLabel:"檔案（3MF、縮圖等）",newApiKeysGenerated:"已產生新 API 金鑰",newApiKeysWarning:"這些金鑰僅顯示一次。請立即複製！",processingBackup:"處理備份檔案中...",noDataFound:"備份檔案中未找到可恢復的資料。",failedToRestore:"恢復備份失敗。請檢查檔案格式。"},backupExport:{title:"匯出備份",selectData:"選擇要包含的資料",selectAll:"全選",selectNone:"全不選",categoryDescriptions:{settings:"語言、主題、更新偏好",notifications:"ntfy、Pushover、Discord 等",templates:"自訂訊息範本",smartPlugs:"Tasmota 插座設定",externalLinks:"側邊欄外部服務連結",printers:"印表機資訊（不含存取碼）",plateDetection:"空列印板參考影像",filaments:"耗材類型和成本",maintenance:"自訂維護計畫",archives:"所有列印資料 + 檔案（3MF、縮圖、照片）",projects:"專案、材料清單和附件",pendingUploads:"虛擬印表機待審核的上傳",apiKeys:"Webhook API 金鑰（匯入時產生新金鑰）"},requiresPrinters:"需要選擇印表機",zipFileWarning:"將建立 ZIP 檔案。",zipFileDescription:"包括所有 3MF 檔案、縮圖、縮時攝影和照片。這可能需要一些時間並產生較大的檔案。",includeAccessCodes:"包含存取碼",includeAccessCodesDescription:"用於轉移到另一臺機器",includeAccessCodesWarning:"存取碼將以明文形式包含。請妥善保管此備份檔案！",categoriesSelected:"已選擇 {{selectedCount}} 個類別"},pendingUploads:{placeholders:{notes:"新增關於此列印的備註..."},discardUpload:"丟棄上傳",archiveAllUploads:"歸檔所有上傳",discardAllUploads:"丟棄所有上傳",archive:"歸檔",timeAgo:{justNow:"剛剛",minutesAgo:"{{minutes}} 分鐘前",hoursAgo:"{{hours}} 小時前",daysAgo:"{{days}} 天前"}},apiBrowser:{placeholders:{requestBody:"JSON 請求體...",searchEndpoints:"搜尋端點..."}},configureAmsSlot:{title:"設定 AMS 槽位",slotConfigured:"槽位已設定！",configuringSlot:"正在設定槽位：",slotLabel:"{{ams}} 槽位 {{slot}}",searchPresets:"搜尋預設...",colorPlaceholder:"顏色名稱或十六進位（例如：棕色、FF8800）",clearCustomColor:"清除自訂顏色",noCloudPresets:"無雲端預設。登入拓竹雲以同步。",noPresetsAvailable:"無可用預設。登入拓竹雲或匯入本機設定。",noMatchingPresets:"未找到匹配的預設。",custom:"自訂",builtin:"內建",settingsSentToPrinter:"設定已傳送到印表機",filamentProfile:"耗材設定",kProfileLabel:"K 值設定（壓力推進）",filteringFor:"篩選：{{material}}",noKProfile:"無 K 值設定（使用預設值 0.020）",noMatchingKProfiles:"未找到匹配的 K 值設定。將使用預設 K=0.020。",selectFilamentFirst:"請先選擇耗材設定",kFromCalibration:"K={{value}}（來自印表機校準）",customColorLabel:"自訂顏色（可選）",presetColors:"{{name}} 顏色：",showLessColors:"顯示更少顏色",showMoreColors:"顯示更多顏色",clear:"清除",hexLabel:"十六進位：#{{hex}}",resetting:"重設中...",resetSlot:"重設槽位",cancel:"取消",configuring:"設定中...",configureSlot:"設定槽位"},githubBackup:{title:"Git 備份",history:"歷史",downloadBackup:"下載備份",restoreBackup:"恢復備份",noBackupsYet:"尚無備份"},emailSettings:{placeholders:{fromName:"Bambuddy"}},tagManagement:{searchTags:"搜尋標籤...",renameTag:"重新命名標籤",deleteTag:"刪除標籤"},notificationTemplates:{placeholders:{title:"通知標題...",body:"通知正文..."}},batchTag:{placeholders:{newTag:"輸入新標籤..."}},photoGallery:{deletePhoto:"刪除照片"},filamentHoverCard:{copySpoolUuid:"複製耗材 UUID"},kProfilesView:{hasNote:"有備註",copyProfile:"複製設定"},layout:{openMenu:"開啟選單",noPermissionSystemInfo:"您沒有檢視系統資訊的權限"},dashboard:{dragToReorder:"拖曳以重新排列",hideWidget:"隱藏小工具"},notificationProviderCard:{deleteNotificationProvider:"刪除通知提供者"},fileManagerModal:{closeFileManager:"關閉檔案管理器",sortFiles:"排序檔案",goToParentFolder:"返回上級資料夾",threeView:"3D 檢視"},embeddedCameraViewer:{refreshStream:"重新整理流",close:"關閉",zoomOut:"縮小",resetZoom:"重設縮放",zoomIn:"放大",dragToResize:"拖曳調整大小"},timelapseViewer:{skipBack5s:"後退 5 秒",skipForward5s:"前進 5 秒"},notificationProviders:{descriptions:{email:"SMTP 郵件通知",telegram:"透過 Telegram 機器人通知",discord:"透過 Webhook 傳送到 Discord 頻道",ntfy:"免費、可自託管的推送通知",pushover:"簡單、可靠的推送通知",callmebot:"透過 CallMeBot 的免費 WhatsApp 通知",webhook:"通用 HTTP POST 到任意 URL"}},logViewer:{searchPlaceholder:"搜尋訊息或日誌名稱...",noLogEntries:"未找到日誌條目"},switchbarPopover:{noSwitchesInSwitchbar:"切換欄中沒有開關"},projectPageModal:{placeholders:{title:"標題",designer:"設計師",license:"許可證",description:"輸入描述...",profileTitle:"設定標題",profileDescription:"設定描述..."}},spoolmanSettings:{},time:{unknown:"-",waiting:"等待中",justNow:"剛剛",now:"現在",minsAgo:"{{count}} 分鐘前",inMins:"{{count}} 分鐘後",hoursAgo:"{{count}} 小時前",inHours:"{{count}} 小時後",daysAgo:"{{count}} 天前",inDays:"{{count}} 天後"},spoolbuddy:{nav:{dashboard:"儀表板",ams:"AMS",inventory:"庫存",writeTag:"寫入",settings:"設定"},status:{nfcReady:"NFC 就緒",nfcOff:"NFC 關閉",offline:"離線",online:"線上",noPrinters:"無印表機",deviceOffline:"裝置離線",waitingConnection:"等待裝置連線...",systemReady:"系統就緒",status:"狀態"},dashboard:{readyToScan:"準備掃描",idleMessage:"將耗材放在磅秤上以識別",nfcHint:"NFC 標籤將自動讀取",device:"裝置",syncWeight:"同步重量",weightSynced:"已同步！",unknownTag:"未知標籤",newTag:"偵測到新標籤",onScale:"在磅秤上",linkSpool:"連結到耗材",linkTagTitle:"將標籤連結到耗材",linkTag:"連結標籤",selectSpool:"選擇要連結此標籤的耗材：",noUntagged:"未找到沒有標籤的耗材",tagDetected:"偵測到標籤",noTag:"無標籤",tagId:"標籤",grossWeight:"毛重",spoolSize:"耗材盤尺寸",close:"關閉",currentSpool:"目前耗材",plateReady:"熱床就緒: {{name}}",plateReadyLabel:"待清理的熱床",plateClearAction:"清理",plateClearedToast:"已將熱床標記為已清理",plateClearFailed:"無法將熱床標記為已清理"},modal:{spoolDetected:"偵測到耗材",assignToAms:"分配到 AMS",syncWeight:"同步重量",weightSynced:"已同步！",syncing:"同步中...",newTagDetected:"偵測到新標籤",addToInventory:"新增到庫存",assignToAmsTitle:"分配到 AMS",selectSlot:"選擇槽位",assign:"分配",assigning:"分配中...",assignSuccess:"已分配！",assignPendingInsert:"已分配。插入耗材後將設定槽位。",assignError:"分配耗材失敗。請重試。",noPrinterSelected:"選擇印表機...",noAmsDetected:"此印表機未偵測到 AMS",slot:"槽位"},weight:{noReading:"無讀數",stable:"穩定",measuring:"測量中...",tare:"去皮",calibrate:"校準"},spool:{remaining:"剩餘",material:"材料",brand:"品牌",color:"顏色",coreWeight:"軸心重",labelWeight:"標籤重",scaleWeight:"磅秤重",netWeight:"淨重",lastUsed:"上次使用"},ams:{noData:"未偵測到 AMS",connectAms:"連線 AMS 以檢視耗材槽位",noPrinter:"未選擇印表機",selectPrinter:"從頂部欄選擇印表機",printerDisconnected:"印表機已斷開",humidity:"濕度",level:"餘量",active:"活躍",slot:"槽位",empty:"空"},inventory:{search:"搜尋耗材...",empty:"庫存中沒有耗材",noResults:"沒有匹配的耗材",spools:"個耗材",addSpool:"新增耗材"},settings:{tabDevice:"裝置",tabDisplay:"顯示",tabScale:"磅秤",tabUpdates:"更新",nfcReader:"NFC 讀卡器",type:"類型",connection:"連線",notConnected:"不適用",deviceInfo:"裝置資訊",hostname:"主機",uptime:"執行時間",systemConfig:"後端與認證",backendUrl:"Bambuddy 後端 URL",apiToken:"API 權杖",apiTokenPlaceholder:"輸入 API 權杖",saveConfig:"儲存設定",systemQueued:"設定已加入佇列。",nfcDiagnostic:"NFC 診斷",scaleDiagnostic:"磅秤診斷",readTagDiagnostic:"讀取標籤診斷",testNfc:"測試讀卡器",testScale:"測試精度",testReadTag:"讀取標籤",systemFieldsRequired:"後端 URL 為必填項。",brightness:"亮度",saved:"已儲存",noBacklight:"未偵測到 DSI 背光。亮度控制需要 DSI 螢幕。",screenBlank:"螢幕熄滅超時",screenBlankDesc:"不活動後螢幕關閉。觸控喚醒。",displayNote:"亮度作為軟體濾鏡套用。",scaleCalibration:"磅秤校準",currentWeight:"目前重量",tareOffset:"去皮",calFactor:"係數",knownWeight:"已知重量",calStep1:"移除磅秤上所有物品並按設定零點。",calStep2:"將已知重量放在磅秤上。",setZero:"設定零點",calibrateNow:"校準",calibrated:"已校準",tareSet:"去皮命令已傳送。等待裝置回應...",tareComplete:"去皮完成！",tareTimedOut:"去皮逾時 — SpoolBuddy 守護程序是否正在執行？",tareFailed:"傳送去皮命令失敗",zeroSet:"零點已設定。將已知重量放在磅秤上。",calibrationDone:"校準完成！",calibrationFailed:"校準失敗",lastCalibrated:"上次校準",stable:"穩定",settling:"穩定中...",firmware:"韌體",scale:"磅秤",noDevice:"未找到 SpoolBuddy 裝置",daemonVersion:"守護程式版本",currentVersion:"目前",versionPending:"等待守護程式...",checking:"檢查中...",checkUpdates:"檢查更新",updateAvailable:"有可用更新",updateInstructions:"透過 SSH 更新：執行 SpoolBuddy 安裝腳本進行升級。",upToDate:"已是最新",includeBeta:"包含測試版本"},writeTag:{tabExisting:"現有耗材",tabNew:"新耗材",tabReplace:"替換標籤",searchPlaceholder:"按材料、顏色、品牌搜尋...",noUntaggedSpools:"沒有無標籤的耗材",noTaggedSpools:"沒有有標籤的耗材",selectSpool:"選擇一個耗材，然後將空白 NTAG 放在讀卡器上",placeTag:"將 NTAG 放在讀卡器上",tagReady:"偵測到標籤 — 準備寫入",writeTag:"寫入標籤",replaceTag:"替換標籤",writing:"寫入標籤中...",waiting:"等待 SpoolBuddy...",writeSuccess:"標籤寫入成功！",writeFailed:"寫入失敗",queueFailed:"佇列寫入命令失敗",tryAgain:"重試",cancel:"取消",replaceWarning:"舊標籤將被取消連結。新標籤將替換它。",deviceOffline:"SpoolBuddy 離線",material:"材料",colorName:"顏色名稱",color:"顏色",brand:"品牌",weight:"重量 (g)",createSpool:"建立耗材",creating:"建立中...",spoolCreated:"耗材已建立！準備寫入。",createFailed:"建立耗材失敗",incompleteDataWarning:"已使用不完整的Spoolman資料寫入標籤"},quickMenu:{printerPower:"印表機電源",systemControls:"系統",restartDaemon:"重新啟動守護程式",restartBrowser:"重新啟動瀏覽器",reboot:"重新開機",shutdown:"關機",swipeToClose:"向下滑動關閉",confirmTitle:"確認",confirmShutdown:"確定要關閉 SpoolBuddy 嗎？您需要實體存取才能重新開啟。",confirmReboot:"確定要重新開機 SpoolBuddy 嗎？",confirmRestartDaemon:"重新啟動 SpoolBuddy 守護程式？NFC 和磅秤將暫時不可用。",confirmRestartBrowser:"重新啟動kiosk瀏覽器？螢幕將短暫變黑。",confirm:"確認",confirmPlugOn:"開啟 {{name}}？",confirmPlugOff:"關閉 {{name}}？",turnOn:"開啟",turnOff:"關閉"}},diagnostic:{modalTitle:"連線診斷 — {{name}}",running:"正在執行診斷...",runningElapsed:"正在執行診斷... ({{elapsed}}秒)",waitingForReportHint:"正在等待印表機發佈狀態報告 — 最長可能需要 {{max}} 秒。",runFailed:"無法執行診斷：{{error}}",retry:"重新執行",runButton:"執行診斷",sectionTitle:"連線診斷",sectionDescription:"檢查印表機無法連線或無法列印的原因 — 連接埠可達性、LAN 開發者模式、Docker 網路模式與認證資訊。",noPrinters:"未設定印表機。",overall:{ok:"未發現問題 — 印表機連線看起來正常。",warnings:"印表機應該可以運作，但有些項目需要注意。",problems:"發現了可解釋印表機無法連線或無法列印的問題。"},check:{port_mqtt:{title:"控制連接埠（MQTT 8883）",pass:"可達 — 印表機正在接受控制連線。",fail:"連接埠 8883 無法連線。印表機已關機、IP 位址不同，或被防火牆封鎖。請核實印表機 IP，並確保沒有任何東西封鎖連接埠 8883。"},port_ftps:{title:"檔案傳輸連接埠（FTPS 990）",pass:"可達 — 傳送列印檔案將正常運作。",warn:"連接埠 990 無法連線。監控可能仍然有效，但向印表機傳送列印工作將失敗。請確保連接埠 990 未被封鎖。"},port_rtsps:{title:"攝影機連接埠（RTSPS 322）",pass:"可達 — 攝影機串流將正常運作。",warn:"連接埠 322 無法連線。即時攝影機檢視將無法運作。這不影響列印。"},network_mode:{title:"Docker 網路模式",pass:"正在以 host 網路模式執行。",warn:'Bambuddy 正在以 Docker bridge 網路執行。印表機探索與虛擬印表機需要 host 網路模式 — 請使用 "network_mode: host" 重新建立容器。',skip:"未在 Docker 中執行 — 不適用。"},subnet:{title:"網路子網路",pass:"印表機與 Bambuddy 位於同一子網路。",warn:"印表機（{{printer_ip}}）與 Bambuddy（{{host_ip}}）位於不同的子網路。除非設定了子網路之間的路由，否則它們可能無法互相連線。",skip:"無法判定子網路 — 已略過。"},mqtt_auth:{title:"印表機認證資訊",pass:"印表機已接受連線。",fail:"印表機可達，但拒絕了連線。存取碼或序號很可能有誤。每次切換開發者模式時存取碼都會變更 — 請從印表機螢幕重新複製。",skip:"未檢查 — 無法連線到印表機。"},developer_mode:{title:"LAN 開發者模式",pass:"開發者模式已啟用。",fail:"印表機上的開發者模式已關閉。請在印表機的 LAN 設定中啟用它 — 並按 OK 確認。否則列印將無法開始。",skip:"無法檢查 — 需要與印表機的即時連線。"},printer_publishing:{title:"印表機正在發佈狀態",pass:"印表機正在發佈狀態更新 — AMS、耗材和 K 配置將正確鏡像到切片軟體。",fail:"MQTT 代理已接受連線，但印表機未發佈任何狀態報告。這幾乎總是因為序號錯誤或大小寫不一致 — device/<serial>/report 主題區分大小寫。請將印表機設定中的序號與印表機螢幕上的顯示進行核對。",skip:"無法檢查 — 需要與印表機的即時連線。"}}},systemHealth:{sectionTitle:"系統健康",sectionDescription:"掃描最近的日誌以找出已知問題，在它們演變成支援工單之前，通常你可以自行解決。",rescan:"重新掃描",clean:"在最近 {{times}} 筆日誌中未發現已知問題。",logUnavailable:"檔案日誌記錄已停用，因此無法掃描日誌。請啟用檔案日誌以使用此檢查。",learnMore:"如何解決",fixLabel:"解決方法：",occurrences:"出現 {{times}} 次 — 最近一次 {{lastSeen}}",category:{layer8:"你可以自行解決",environment:"環境",bug:"請回報此問題"},signature:{"ftp-auth-rejected":{name:"印表機拒絕了存取碼",cause:"印表機拒絕了檔案傳輸登入。存取碼錯誤，或在切換開發者模式後已變更。",fix:"從印表機螢幕（區域網路設定）重新複製存取碼，並在 Bambuddy 的印表機設定中更新。"},"ftp-connection-timeout":{name:"檔案傳輸連線逾時",cause:"Bambuddy 無法連線印表機的檔案傳輸連接埠（FTPS 990）。該連接埠被封鎖，或印表機已關機或位於其他子網路。",fix:"請確認 Bambuddy 與印表機之間的 990 連接埠未被封鎖，且兩者位於同一網路。"},"ftp-ssl-error":{name:"安全檔案傳輸交握失敗",cause:"與印表機檔案傳輸伺服器的 TLS 交握失敗。通常是防火牆或印表機韌體過舊所致。",fix:"請更新印表機韌體，並檢查沒有防火牆或代理伺服器攔截 990 連接埠上的連線。"},"mqtt-connection-flapping":{name:"印表機連線反覆中斷",cause:"控制連線（MQTT 8883）反覆中斷並重新連線——通常是網路訊號弱或連接埠被部分封鎖所致。",fix:"請檢查印表機附近的 Wi-Fi 訊號，盡量使用有線連線，並確認 8883 連接埠能夠穩定連線。"},"camera-connection-refused":{name:"無法存取攝影機串流",cause:"無法在 RTSPS 322 連接埠連線即時攝影機。該連接埠被封鎖，或印表機上的攝影機或區域網路即時影像已關閉。",fix:"請在印表機上啟用攝影機和區域網路即時影像，並確認 322 連接埠未被封鎖。這不會影響列印。"},"database-locked":{name:"資料庫寫入衝突",cause:'在負載下 SQLite 資料庫出現 "database is locked" 錯誤——同時使用多台印表機時較為常見。',fix:"請將 Bambuddy 切換到外部 PostgreSQL 資料庫。參見文件中的 PostgreSQL 指南。"}}},vpDiagnostic:{title:"設定檢查 — {{name}}",runButton:"執行設定檢查",running:"正在執行設定檢查...",runFailed:"無法執行設定檢查：{{error}}",retry:"重新執行",overall:{ok:"所有檢查均已通過 — 此虛擬印表機已正確設定。",warnings:"虛擬印表機應該可以運作，但有些方面需要注意。",problems:"發現的問題可以解釋切片軟體為何無法看到或使用此虛擬印表機。"},check:{enabled:{title:"虛擬印表機已啟用",fail:"此虛擬印表機已關閉。請將其開啟以使其可被探索。"},running:{title:"服務正在執行",fail:"虛擬印表機已啟用，但其服務未執行。請檢查 Bambuddy 記錄 — 通常是繫結 IP 衝突或權限錯誤使其停止。"},bind_interface:{title:"繫結網路介面",fail:"繫結介面未設定，或在此主機上已不存在。請在「繫結介面」下拉選單中選擇一個目前的介面。"},access_code:{title:"已設定存取碼",fail:"未設定存取碼。必須向切片軟體提供與您在此處設定的相同的 8 位存取碼。"},target_printer:{title:"目標印表機",fail:"未選擇目標印表機。代理模式需要一台實際的印表機進行轉送。",warn:"目標印表機目前處於離線狀態 — 重新連線後將恢復轉送。"},port_ftps:{title:"檔案上傳服務（連接埠 {{port}}）",fail:"繫結 IP 的連接埠 {{port}} 上沒有任何監聽，因此切片軟體無法上傳檔案。通常是此介面上的連接埠衝突所致。"},port_mqtt:{title:"控制服務（連接埠 {{port}}）",fail:"繫結 IP 的連接埠 {{port}} 上沒有任何監聽，因此切片軟體無法連線或顯示狀態。"},port_bind:{title:"探索服務（連接埠 {{port}}）",fail:"繫結 IP 的連接埠 {{port}} 上沒有任何監聽，因此切片軟體的探索交握會失敗。"},certificate:{title:"TLS 憑證",pass:"憑證已就緒。請確保已將 Bambuddy CA 憑證（上方）匯入切片軟體的信任庫。",fail:"此虛擬印表機的 TLS 憑證遺失。請檢查 Bambuddy 資料目錄是否可寫入。"}}},bugReport:{logHealthSummary:"在你的日誌中發現了已知問題",logHealthIntro:"最近的日誌與已知問題相符。請查看下方的解決方法——解決它們可能無需提交錯誤報告即可解決你的問題。你仍然可以在下方提交報告。",title:"報告錯誤",description:"描述",descriptionPlaceholder:"出了什麼問題？請描述問題...",email:"信箱（可選）",emailPlaceholder:"your@email.com",emailPrivacy:"如果提供，您的信箱將包含在GitHub Issue的摺疊部分中，以便維護者後續跟進。",screenshot:"截圖",uploadOrPaste:"上傳、貼上或拖曳圖片",dataCollectedSummary:"報告中包含哪些資料？",dataIncluded:"包含：",dataIncludedList:"應用程式版本、作業系統、架構、Python版本、資料庫統計（僅計數）、印表機型號、噴嘴數量、韌體版本、連線狀態、整合狀態（Spoolman、MQTT、HA）、非敏感設定、網路介面數量、Docker詳情、依賴版本。",dataNeverIncluded:"絕不包含：",dataNeverIncludedList:"印表機名稱、序列號、存取碼、密碼、IP 位址、信箱地址、API金鑰、權杖、Webhook URL、主機名稱或使用者名稱。",submit:"提交",startLogging:"開始偵錯日誌",stepEnableLogging:"偵錯日誌已啟用",stepReproduce:"請現在重現問題",stepStopLogging:"停止並提交報告",stopAndSubmit:"停止並提交",maxDuration:"{{minutes}} 分鐘後自動停止",stoppingLogs:"正在收集日誌並提交...",submitting:"正在提交錯誤報告...",submittingStepConnection:"正在執行印表機連線檢查",submittingStepVirtualPrinters:"正在執行虛擬印表機設定檢查",submittingStepLogScan:"正在掃描最近的日誌以尋找已知問題",submittingStepSubmit:"正在將報告提交至 GitHub",submitSuccess:"錯誤報告提交成功！",submitFailed:"提交錯誤報告失敗",diagnosticChecking:"正在檢查印表機連線...",diagnosticHealthy:"連線檢查通過 — 未在您的印表機上發現問題。",diagnosticSummary:"{{total}} 台印表機中有 {{problems}} 台存在連線問題",diagnosticIntro:"一台或多台印表機存在連線問題，可能正是您遇到問題的原因。請展開下方的印表機查看解決方法 — 解決它也許無需提交錯誤報告即可解決問題。您仍然可以在下方提交報告。",thankYou:"謝謝！",submitted:"您的錯誤報告已提交。",viewIssue:"檢視 Issue",unexpectedError:"發生了意外錯誤"},failureDetection:{title:"AI 故障檢測",description:"透過自託管的 Obico ML API 監控列印,並對偵測到的故障自動採取行動。",mlUrl:"Obico ML API 地址",mlUrlHint:"您自託管的 Obico ml_api 容器的基礎 URL(例如 http://192.168.1.10:3333)。",test:"測試",testSuccess:"ML API 可存取且正常。",testFailed:"無法存取 ML API。",sensitivity:"靈敏度",sensitivityLow:"低(減少誤報)",sensitivityMedium:"中(平衡)",sensitivityHigh:"高(更早檢測,更多誤報)",sensitivityHint:"調整觸發警告和故障的置信度閾值。",action:"偵測到故障時的操作",actionNotify:"僅通知",actionPause:"暫停列印",actionPauseOff:"暫停並切斷電源",pollInterval:"檢查間隔(秒)",pollIntervalHint:"列印過程中每臺印表機的檢查頻率。最小 5 秒,最大 120 秒。",externalUrlMissing:"尚未設定外部 URL。",externalUrlHint:"ML API 透過 URL 擷取攝影機快照。請在一般設定中設定外部 URL，讓 ML API 容器可以連線到 Bambuddy。",perPrinterTitle:"監控的印表機",perPrinterHint:"選擇檢測服務要監視哪些印表機。",monitorAll:"監控所有已連線的印表機",statusTitle:"狀態",serviceRunning:"服務執行中",thresholds:"低 / 高閾值",activePrinters:"活動列印",noActivePrints:"目前沒有正在進行的列印。",historyTitle:"最近檢測",noHistory:"尚無檢測紀錄。"},makerworld:{title:"MakerWorld",description:"貼上 MakerWorld 模型連結，即可直接在 Bambuddy 中匯入並列印 —— 無需切換至 Bambu Handy 應用程式。",pasteUrlHeader:"從 MakerWorld 匯入",pasteUrlPlaceholder:"https://makerworld.com/en/models/… 或貼上任意 MakerWorld 連結",resolveButton:"解析",signInRequiredTitle:"下載需要登入 Bambu Cloud",signInRequiredBody:"您可以匿名瀏覽模型詳情，但下載 3MF 檔案需要 Bambu Cloud 帳戶。",openCloudSettings:"開啟雲端設定",untitledModel:"無標題模型",byCreator:"作者: {{name}}",downloadsCount:"{{count}} 次下載",licensePrefix:"授權條款",alreadyImported:"已在資料庫中",openOnMakerworld:"在 MakerWorld 中開啟",alreadyInLibrary:"此模型已在您的資料庫中 —— 可在檔案管理員 → MakerWorld 中找到",importSuccess:"已匯入 {{filename}} —— 已儲存至檔案管理員 → MakerWorld",platesHeader:"列印板 ({{count}})",plateDefaultName:"列印板 {{n}}",materialCount:"{{count}} 種耗材",amsRequired:"需要 AMS",slicedFor:"為 {{printer}} 切片",alsoCompatible:"還標記為相容：{{printers}}",importToLibrary:"儲存",sliceIn:"儲存並在 {{slicer}} 中切片",disclaimer:"MakerWorld 整合使用由社群記錄的 API 介面。Bambuddy 與 MakerWorld 或 Bambu Lab 無從屬或認可關係。",lastImportSuccess:"已匯入您的資料庫",lastImportAlreadyInLibrary:"已存在於您的資料庫中",viewInLibrary:"在檔案管理員中查看",openInBambuStudio:"在 Bambu Studio 中開啟",openInOrcaSlicer:"在 OrcaSlicer 中開啟",importTo:"匯入至檔案管理員",recentImportsHeader:"最近匯入",phaseResolving:"解析中",phaseDownloading:"下載中",folderAuto:"MakerWorld (預設)",importAll:"全部匯入",importAllProgress:"正在匯入 {{current}}/{{total}}",openGallery:"開啟圖片庫",galleryPrev:"上一張",galleryNext:"下一張",deleteImport:"從資料庫中移除",importDeleting:"正在移除…",importDeleted:"已從資料庫中移除",confirmDelete:"從資料庫中移除 {{filename}}？本機檔案將被刪除，但可以從 MakerWorld 重新匯入。",errors:{resolveFailed:"無法解析該 MakerWorld 連結。",downloadFailed:"下載失敗。請重試。",deleteFailed:"無法從資料庫中移除檔案。"}},gcodeViewer:{back:"返回",backToArchives:"返回列印歸檔",backToFiles:"返回檔案管理器"},libraryTrash:{title:"資源回收筒",headerButton:"資源回收筒",headerTooltip:"檢視已移至資源回收筒的檔案",backToFiles:"返回檔案管理員",subtitleAdmin:"已刪除的檔案會在資源回收筒保留 {{days}} 天，之後自動刪除。此檢視顯示所有使用者的資源回收筒。",subtitleUser:"已刪除的檔案會在資源回收筒保留 {{days}} 天，之後自動刪除。",loading:"正在載入資源回收筒…",loadError:"無法載入資源回收筒。",empty:"資源回收筒是空的。",summary:"{{count}} 個檔案 · {{size}}",emptyTrash:"清空資源回收筒",restore:"還原",purgeNow:"立即刪除",autoPurgeIn:"將於 {{when}} 自動刪除",days:"天",retentionLabel:"自動刪除時間",selectAll:"全選",selectOne:"選擇 {{filename}}",selectionCount:"已選擇 {{count}} 項",bulkRestore:"還原所選",bulkPurge:"刪除所選",col:{filename:"檔案",folder:"資料夾",size:"大小",deleted:"移入資源回收筒",autoPurge:"自動刪除",owner:"擁有者",actions:"操作"},confirm:{purgeTitle:"永久刪除？",purgeBody:"{{filename}} 將從磁碟中刪除，無法還原。",emptyTitle:"清空資源回收筒？",emptyBody:"全部 {{count}} 個檔案將從磁碟中刪除。此操作無法復原。",bulkPurgeTitle:"永久刪除所選檔案？",bulkPurgeBody:"所選的 {{count}} 個檔案將從磁碟中刪除，無法還原。",cta:"永久刪除"},toast:{restored:"檔案已還原。",restoreFailed:"無法還原檔案。",purged:"檔案已永久刪除。",purgeFailed:"無法刪除檔案。",emptied:"已從資源回收筒刪除 {{count}} 個檔案。",emptyFailed:"無法清空資源回收筒。",retentionSaved:"自動刪除已設定為 {{days}} 天。",retentionFailed:"無法儲存保留設定。",bulkRestored:"已還原 {{count}} 個檔案。",bulkPurged:"已刪除 {{count}} 個檔案。"}},libraryPurge:{title:"清理舊檔案",headerButton:"清理舊檔案",headerTooltip:"批次將舊檔案移至資源回收筒",description:"早於所選時間的檔案將被移至資源回收筒。外部資料夾會被略過。在自動刪除之前，您可以從資源回收筒還原檔案。",ageLabel:"移動早於以下天數的檔案",days:"天",includeNeverPrinted:"包括從未列印過的檔案",effectsTitle:"點擊清除時會發生什麼",effect1:"符合的檔案移至回收筒 — 尚未從磁碟刪除。",effect2:"在保留期到期之前，您可以隨時從回收筒復原。",effect3:"保留期滿後，回收筒清理器將它們從磁碟永久刪除。",effect4:"外部（連結）資料夾中的檔案將被略過 — Bambuddy 從不刪除不屬於自己的位元組。",previewLoading:"正在檢查符合的檔案數量…",previewFailed:"無法預覽清理結果。",previewSummary:"{{count}} 個檔案 · {{size}} 將被移至資源回收筒",andMore:"…還有 {{count}} 個",warning:"檔案將被軟刪除——在保留期結束前，您可以從資源回收筒還原它們。",confirmCta:"將 {{count}} 個移至資源回收筒",purging:"正在移至資源回收筒…",toast:{success:"已將 {{count}} 個檔案移至資源回收筒。",failed:"無法清理檔案。"}},libraryAutoPurge:{enableLabel:"自動清理舊檔案",enableDescription:"每天執行一次管理員清理。檔案會先進入資源回收筒——不會立即刪除。",ageLabel:"自動清理早於以下天數的檔案",ageDescription:"最少 7 天，最多 10 年。使用與手動「清理舊檔案」按鈕相同的時間規則。",days:"天",includeNeverPrinted:"包括從未列印過的檔案",saveFailed:"無法儲存自動清理設定。"},archivePurge:{headerButton:"清除舊條目",headerTooltip:"批次刪除舊歸檔",title:"清除舊歸檔",description:"清除舊的列印歷史。每個歸檔按其最近一次列印完成時間老化 — 重新列印歸檔會重新整理其年齡，因此活躍工作永遠不會被清除。",ageLabel:"刪除最近未列印的歸檔：",days:"天",effectsTitle:"點擊清除時會發生什麼",effect1:"每個符合的歸檔將從清單中隱藏，其磁碟檔案（3MF、縮圖、縮時攝影、原始 3MF、F3D、照片）也會被刪除。",effect2:"資料庫中的歸檔記錄會保留，因此 Quick Stats 仍可計入耗材、時間、成本與能耗的貢獻 — 與單筆刪除的預設行為一致。",effect3:"勾選下方「同時從統計中移除」，可一併清除 Quick Stats 中的貢獻（等同單筆刪除選項）。此操作無法復原。",effect4:"重新列印歸檔會重新整理其使用計時器，因此仍在使用的歸檔不會被清除。",purgeStatsLabel:"同時從統計中移除",purgeStatsHint:"從 Quick Stats（耗材、時間、成本、能耗）中移除符合的歸檔。未勾選時，Quick Stats 會保留所有貢獻，僅檔案從磁碟刪除。",previewLoading:"檢查符合的歸檔數量…",previewFailed:"無法預覽清除。",previewSummary:"將移除 {{count}} 個歸檔 · {{size}}",andMore:"…還有 {{count}} 個",warning:"檔案會從磁碟刪除且無法復原。繼續前請下載或收藏您想保留的內容。",confirmCta:"移除 {{count}} 個歸檔",purging:"移除中…",toast:{success:"已移除 {{count}} 個歸檔。",failed:"無法清除歸檔。"}},archiveAutoPurge:{enableLabel:"自動清除舊歸檔",enableDescription:"每天一次，將閾值內未列印的歸檔從清單中隱藏，並從磁碟中刪除其檔案。重新列印會重設計時器。",ageLabel:"自動刪除最近未列印的歸檔：",ageDescription:"最少 7 天，最多 10 年。基於最近一次列印完成 — 重新列印會重新整理年齡。刪除 3MF、縮圖、縮時攝影、原始 3MF、F3D 與照片。",days:"天",purgeStatsLabel:"同時從統計中移除",purgeStatsDescription:"啟用後，每日清理任務還會將每個被清除的歸檔從 Quick Stats（耗材、時間、成本、能耗）中移除。預設關閉 — Quick Stats 會保留貢獻，僅檔案從磁碟刪除。",runNow:"立即清除歸檔",saveFailed:"無法儲存自動清除設定。"},cameraTokens:{title:"攝影機 API 權杖",navTitle:"攝影機 API 權杖",description:"長期權杖，用於將攝影機串流嵌入 Home Assistant、Frigate、資訊站或其他需要穩定 URL 的工具。每個權杖僅限攝影機串流，可隨時撤銷。",loading:"載入中…",confirmRevoke:{title:"撤銷此權杖？",body:"使用「{{name}}」的任何裝置將立即失去存取權限。此操作無法復原。",cancel:"取消",confirm:"撤銷"},create:{title:"建立新權杖",nameLabel:"權杖名稱",namePlaceholder:"例如 Home Assistant",daysLabel:"到期天數",submit:"建立",hint:"最大有效期 365 天。權杖值僅在建立時顯示一次 — 請立即複製。"},created:{title:"權杖已建立 — 立即複製",warning:"這是此權杖唯一一次可見。關閉此對話框後您將無法再次查看。",copy:"複製",dismiss:"我已儲存"},list:{myTitle:"我的權杖",allTitle:"所有使用者（管理員視圖）",empty:"尚無權杖。",name:"名稱",owner:"擁有者",prefix:"前綴",created:"建立時間",expires:"到期時間",lastUsed:"最近使用",revoke:"撤銷",expired:"已過期"},toast:{created:"權杖已建立",createFailed:"建立權杖失敗",revoked:"權杖已撤銷",revokeFailed:"撤銷權杖失敗",loadFailed:"載入權杖失敗",copied:"已複製到剪貼簿",copyFailed:"複製失敗 — 手動選擇並複製"}},forecast:{title:"庫存預測",noSpools:"未找到活躍的料卷。請將料卷新增至庫存以查看預測資料。",noUsageData:"無可用使用資料 — 無法預測庫存時間線。",sku:"SKU",material:"材料",stock:"庫存",dailyRate:"消耗率",daysLeft:"剩餘天數",emptyBy:"耗盡日期",reorderBy:"補貨截止日",actions:"操作",trend:"趨勢",estimated:"估算",noData:"無資料",timeframe:"時間範圍",chartTitle:"庫存預測 — 前5種材料",dashedLinesROP:"虛線 = 再訂貨點",stockLevel:"庫存量",reorderPoint:"再訂購點",safetyMargin:"安全餘量",trendLegend:"趨勢（基於歷史，95%服務水準）",estimatedLegend:"估算（重量差值）",noDataLegend:"無資料",ropLabel:"再訂貨點",ssLabel:"安全庫存",safetyStockLegend:"安全庫存",stockArrivalLegend:"到貨",stockoutLegend:"斷貨",alertCount_one:"{{count}}條警告",alertCount_other:"{{count}}條警告",order:"訂購",globalLeadTime:"全域交貨期",globalLeadTimeHint:"全域交貨期下限 — 用於所有 SKU 的再訂購點計算",save:"儲存",cancel:"取消",settingsSaved:"設定已儲存",failedSaveSettings:"儲存設定失敗",globalLeadTimeSaved:"全域提前期已儲存",skuLeadTimeOverride:"SKU 交貨期覆蓋",skuLeadTimeHint:"0 = 使用全域交貨期。設定 >0 以覆蓋此 SKU。",safetyMarginLabel:"安全餘量",effectiveLeadTime:"有效交貨期",effectiveLeadTimeHint:"max(全域 {{global}}天, SKU {{sku}}天)",reorderPointHint:"d̄ × LT + safety margin — 當庫存降至此水準時下單",safetyMarginHint:"統計安全庫存 (z=1.65 × σ × √LT) + 使用者自訂緩衝",safetyMarginHintDays:"在統計安全庫存基礎上額外增加的緩衝。{{approx}}",safetyMarginHintDaysApprox:" ≈ 按當前速率 {{g}}g。",safetyMarginHintG:"在統計安全庫存基礎上增加的固定重量緩衝。{{approx}}",safetyMarginHintGApprox:" ≈ 按當前速率 {{days}}天。",individualSpools:"單個料卷",labelWeight:"標示重量",spoolCount_one:"{{count}}個線軸",spoolCount_other:"{{count}}個線軸",stockBreakRisk:"斷貨風險",stockBreakBefore:"補貨前庫存斷檔",stockBreakDetail:"剩餘 {{days}} 天，交貨期 {{lt}} 天。",reorderNow:"立即補貨",reorderTriggerPassed:"觸發日期 {{date}} 已過。",shoppingList:"購物清單",shoppingListItems_one:"（{{count}}項）",shoppingListItems_other:"（{{count}}項）",shoppingListEmpty:"購物清單為空。點擊任意列的購物車圖示以新增商品。",addToCart:"新增至購物清單",alertsSnoozed:"靜音此SKU的提醒",alertsEnabled:"啟用此SKU的提醒",addedToCart:"已新增至購物清單",failedAddItem:"新增項目失敗",listView:"列表",logisticsView:"物流",qty:"數量",weight:"重量",leadTime:"交貨期",expectedRestock:"預計補貨日期",status:"狀態",note:"備註",pending:"待處理",purchased:"已購買",received:"已收貨",markPurchased:"標記為已購買",markReceived:"標記為已收貨 — 將料卷新增至庫存",resetToPending:"重置為待處理",remove:"移除",clearAll:"清空",downloadCsv:"CSV",addToCartTitle:"新增至購物清單",byQuantity:"依數量",byDuration:"依時長",numberOfSpools:"線軸數量",lastHowManyDays:"需要持續多少天？",noUsageQty:"無使用資料 — 數量已設為1。",noteOptional:"備註（選填）",notePlaceholder:"例如：用於專案X，緊急…",addNSpools_one:"新增{{count}}個線軸",addNSpools_other:"新增{{count}}個線軸",onArrival:"到貨時",stockBreakIn:"{{days}} 天後斷貨。",stockRunsOutBefore:"庫存在 {{lt}} 天交貨期結束前耗盡。",atRate:"按 {{rate}}g/天的速度，您需要",moreSpools_one:"再{{count}}個線軸",moreSpools_other:"再{{count}}個線軸",bridgeGap:"來彌補缺口。",noReadAccess:"您沒有查看庫存預測的權限。",noWriteAccess:"您沒有修改預測設定的權限。"}},Tpe={nav:{printers:"Yazıcılar",archives:"Arşivler",queue:"Baskı Kuyruğu",stats:"İstatistikler",profiles:"Profiller",maintenance:"Bakım",projects:"Projeler",inventory:"Filament",files:"Dosya Yöneticisi",makerworld:"MakerWorld",notifications:"Bildirimler",settings:"Ayarlar",system:"Sistem",collapseSidebar:"Kenar çubuğunu daralt",expandSidebar:"Kenar çubuğunu genişlet",update:"Güncelle",updateAvailable:"Güncelleme mevcut: v{{version}}",updateAvailableBanner:"{{version}} sürümü kullanılabilir!",viewUpdate:"Güncellemeyi gör",viewOnGithub:"GitHub'da gör",keyboardShortcuts:"Klavye kısayolları (?)",switchToLight:"Açık moda geç",switchToDark:"Koyu moda geç",switchToSystem:"Sistem moduna geç",smartSwitches:"Akıllı Anahtarlar",logout:"Çıkış",installApp:"Uygulamayı yükle",installAppSuccess:"Bambuddy yüklendi"},common:{save:"Kaydet",saving:"Kaydediliyor...",cancel:"İptal",delete:"Sil",edit:"Düzenle",add:"Ekle",close:"Kapat",confirm:"Onayla",loading:"Yükleniyor...",error:"Hata",errorLoading:"Veri yüklenirken hata",retry:"Yeniden dene",success:"Başarılı",warning:"Uyarı",enabled:"Etkin",disabled:"Devre dışı",yes:"Evet",no:"Hayır",on:"Açık",off:"Kapalı",all:"Tümü",none:"Hiçbiri",search:"Ara",filter:"Filtrele",sort:"Sırala",refresh:"Yenile",download:"İndir",upload:"Yükle",uploading:"Yükleniyor...",uploadFailed:"Yükleme başarısız",actions:"İşlemler",status:"Durum",name:"Ad",description:"Açıklama",date:"Tarih",time:"Saat",hours:"saat",minutes:"dakika",seconds:"saniye",days:"gün",enable:"Etkinleştir",disable:"Devre dışı bırak",permissions:"İzinler",noPrinters:"Yapılandırılmış yazıcı yok",noData:"Veri yok",linkNotFound:"Bağlantı bulunamadı",required:"Zorunlu",optional:"İsteğe bağlı",dismiss:"Kapat",apply:"Uygula",reset:"Sıfırla",export:"Dışa aktar",import:"İçe aktar",clear:"Temizle",selectAll:"Tümünü Seç",deselectAll:"Seçimi Kaldır",noChange:"— Değişiklik yok —",unchanged:"Değişmedi",unassigned:"Atanmamış",unknown:"Bilinmiyor",unknownError:"Bilinmeyen hata",today:"Bugün",tomorrow:"Yarın",asap:"En kısa sürede",overdue:"Gecikmiş",now:"Şimdi",collapse:"Daralt",expand:"Genişlet",viewArchive:"Arşivi gör",viewInFileManager:"Dosya Yöneticisinde gör",addedBy:"{{username}} tarafından eklendi",prints:"baskı",more:"+{{count}} daha",ascending:"Artan",descending:"Azalan",back:"Geri",copy:"Kopyala",copied:"Kopyalandı!",printer:"Yazıcı",remove:"Kaldır",type:"Tür",print:"Baskı",rename:"Yeniden adlandır",move:"Taşı",create:"Oluştur",duplicate:"Çoğalt",left:"Sol",right:"Sağ"},printers:{title:"Yazıcılar",addPrinter:"Yazıcı Ekle",addPreflight:{checking:"Bağlantı kontrol ediliyor...",warning:"Bazı bağlantı kontrolleri başarısız oldu. Bu yazıcı çevrimdışı olarak görünebilir. Aşağıdaki kontrolleri inceleyin, düzeltebileceklerinizi düzeltin veya yine de kaydedin.",back:"Geri",saveAnyway:"Yine de kaydet"},editPrinter:"Yazıcıyı Düzenle",deletePrinter:"Yazıcıyı Sil",printerName:"Yazıcı Adı",serialNumber:"Seri Numarası",ipAddress:"IP Adresi / Ana Bilgisayar Adı",accessCode:"Erişim Kodu",model:"Model",nozzleCount:"Nozul Sayısı",autoArchive:"Otomatik Arşivle",status:{available:"Müsait",idle:"Boşta",printing:"Baskıda",paused:"Duraklatıldı",offline:"Çevrimdışı",problem:"Sorun",error:"Hata",finished:"Tamamlandı",unknown:"Bilinmiyor"},temperatures:{nozzle:"Nozul",bed:"Tabla",chamber:"Hazne"},progress:"%{{percent}} tamamlandı",timeRemaining:"{{time}} kaldı",deleteConfirm:'"{{name}}" silmek istediğinizden emin misiniz?',maintenanceOk:"Bakım Tamam",maintenanceWarning:"{{count}} uyarı",maintenanceWarning_plural:"{{count}} uyarı",maintenanceDue:"{{count}} bekliyor",maintenanceDue_plural:"{{count}} bekliyor",sort:{name:"Ad",status:"Durum",model:"Model",location:"Konum",ascending:"Artan sırala",descending:"Azalan sırala"},cardSize:{small:"Küçük kartlar",medium:"Orta kartlar",large:"Büyük kartlar",extraLarge:"Çok büyük kartlar"},hideOffline:"Çevrimdışı olanları gizle",nextAvailable:"Sıradaki müsait",powerOn:"Aç",offlinePrintersWithPlugs:"Akıllı prizli çevrimdışı yazıcılar",noPrintersConfigured:"Henüz yapılandırılmış yazıcı yok",search:"Yazıcı ara...",noSearchResults:"Aramanıza veya filtrelerinize uyan yazıcı yok",filter:{allStatuses:"Tüm durumlar",allLocations:"Tüm konumlar"},toolbar:{filters:"Filtreler",view:"Görünüm",actions:"İşlemler"},readyToPrint:"Baskıya hazır",external:"Harici",extL:"Ext-L",extR:"Ext-R",deleteArchives:"Baskı arşivlerini sil",noLabel:"Etiket yok",printPreview:"Baskı önizleme",width:"Genişlik",height:"Yükseklik",noObjectsFound:"Nesne bulunamadı",objectsLoadedOnPrintStart:"Nesneler baskı başladığında yüklenir",willBeSkipped:"Atlanacak",name:"Ad",serialCannotBeChanged:"Seri numarası değiştirilemez",locationHelp:"Yazıcıları gruplamak ve kuyruk işlerini filtrelemek için kullanılır",wifiSignal:{veryWeak:"Çok zayıf",weak:"Zayıf",fair:"Orta",good:"İyi",excellent:"Mükemmel"},maintenanceUpToDate:"Tüm bakım güncel - Görüntülemek için tıklayın",chamberLightOn:"Hazne ışığını aç",chamberLightOff:"Hazne ışığını kapat",files:"Dosyalar",browseFiles:"Yazıcı dosyalarına göz at",autoOffAfterPrint:"Baskı sonrası otomatik kapat",autoOffExecuted:"Otomatik kapama uygulandı - sıfırlamak için yazıcıyı açın",hmsErrors:"HMS Hataları",viewHmsErrors:"{{count}} HMS hatasını gör",resume:"Devam Et",pause:"Duraklat",stop:"Durdur",camera:"Kamera",skipObject:"Nesneyi Atla",reconnect:"Yeniden Bağlan",forceRefresh:"Zorla Yenile",forceRefreshSuccess:"Yenileme istendi",mqttDebug:"MQTT Hata Ayıklama",printerInformation:"Yazıcı Bilgisi",copyToClipboard:"Kopyala",copied:"Kopyalandı!",state:"Durum",wifiSignalLabel:"WiFi Sinyali",developerMode:"Geliştirici Modu",enabled:"Etkin",disabled:"Devre dışı",addedOn:"Eklendi",sdCard:"SD Kart",inserted:"Takılı",notInserted:"Takılı değil",totalPrintHours:"Baskı Saatleri",activeNozzle:"Aktif: {{nozzle}} nozul",nozzleRack:"Nozul Rafı",nozzleDocked:"Yuvalanmış",nozzleMounted:"Takılı",nozzleActive:"Aktif",nozzleIdle:"Boşta",nozzleDiameter:"Çap",nozzleType:"Tür",nozzleStatus:"Durum",nozzleFilament:"Filament",nozzleWear:"Aşınma",nozzleMaxTemp:"Maks. Sıcaklık",nozzleSerial:"Seri",nozzleHardenedSteel:"Sertleştirilmiş Çelik",nozzleStainlessSteel:"Paslanmaz Çelik",nozzleTungstenCarbide:"Tungsten Karbür",nozzleFlow:"Akış",nozzleHighFlow:"Yüksek Akış",nozzleStandardFlow:"Standart",firmwareUpdate:"Firmware Güncellemesi",firmwareInstructions:"Yazıcının dokunmatik ekranında şuraya gidin:",firmwareNav:"Şuraya gidin",settings:"Ayarlar",firmware:"Firmware",discoverPrinters:"Yazıcıları Keşfet",searching:"Aranıyor...",manualEntry:"Manuel Giriş",addFromCloud:"Bulut'tan Ekle",toast:{printerDeleted:"Yazıcı silindi",missingSpoolAssignment:"{{printer}} üzerinde baskı başladı. Şunlar için eksik makara ataması: {{slots}}",printerAdded:"Yazıcı eklendi",printerUpdated:"Yazıcı güncellendi",failedToDelete:"Yazıcı silinemedi",failedToAdd:"Yazıcı eklenemedi",connectionFailedNotAdded:"Yazıcıya bağlanılamadı. IP, seri numarası ve erişim kodunu doğrulayın ve yalnızca LAN modunun açık olduğunu onaylayın. Yazıcı eklenmedi.",failedToUpdate:"Yazıcı güncellenemedi",commandSent:"Komut gönderildi",failedToSendCommand:"Komut gönderilemedi",turnedOn:"{{name}} açıldı",failedToPowerOn:"{{name}} açılamadı",scriptTriggered:"Betik tetiklendi",printStopped:"Baskı durduruldu",printPaused:"Baskı duraklatıldı",printResumed:"Baskıya devam edildi",referenceDeleted:"Referans silindi",detectionAreaSaved:"Algılama alanı kaydedildi",failedToRunScript:"Betik çalıştırılamadı",failedToStopPrint:"Baskı durdurulamadı",failedToPausePrint:"Baskı duraklatılamadı",failedToResumePrint:"Baskıya devam edilemedi",failedToControlChamberLight:"Hazne ışığı kontrol edilemedi",failedToSetSpeed:"Baskı hızı ayarlanamadı",failedToUpdateSetting:"Ayar güncellenemedi",failedToSkipObjects:"Nesneler atlanamadı",failedToRereadRfid:"RFID yeniden okunamadı",failedToCheckPlate:"Plaka kontrol edilemedi",failedToUpdateLabel:"Etiket güncellenemedi",failedToDeleteReference:"Referans silinemedi",failedToSaveDetectionArea:"Algılama alanı kaydedilemedi",plateCheckEnabled:"Plaka kontrolü etkinleştirildi",plateCheckDisabled:"Plaka kontrolü devre dışı bırakıldı",calibrationSaved:"Kalibrasyon kaydedildi!",calibrationFailed:"Kalibrasyon başarısız",rfidRereadInitiated:"RFID yeniden okuma başlatıldı",loadInitiated:"Filament yükleniyor…",unloadInitiated:"Filament çıkarılıyor…",failedToLoad:"Filament yüklenemedi",failedToUnload:"Filament çıkarılamadı"},connection:{connected:"Bağlı",offline:"Çevrimdışı"},plateStatus:{markCleared:"Plakayı temizlendi olarak işaretle",cleared:"Plaka Temiz",notCleared:"Plaka Temiz Değil",inUse:"Plaka Kullanımda"},queue:{inQueue:"Kuyrukta {{count}} baskı",inQueue_plural:"Kuyrukta {{count}} baskı"},controls:"Kontroller",rfid:{reread:"RFID'yi yeniden oku"},ams:{load:"Yükle",unload:"Çıkar"},bedJog:{title:"Baskı plakasını hareket ettir",bed:"Tabla",step:"Adım (mm)",up:"Plakayı yukarı hareket ettir",down:"Plakayı aşağı hareket ettir",disabledWhilePrinting:"Baskı sırasında devre dışı",notHomedTitle:"Yazıcı sıfırlanmamış",notHomedMessage:"Yazıcı son baskıdan bu yana sıfırlanmadı. Güvenli konumlandırma için önce otomatik sıfırlamayı çalıştırın (kafayı park eder, ardından X, Y ve Z sıfırlanır) veya yine de hareket ettirin — yazılım son durakları atlanır.",homeZ:"Otomatik Sıfırla",moveAnyway:"Yine de hareket ettir",homingStarted:"Yazıcı otomatik sıfırlanıyor…"},permission:{noAdd:"Yazıcı eklemek için izniniz yok",noEdit:"Yazıcıları düzenlemek için izniniz yok",noDelete:"Yazıcıları silmek için izniniz yok",noControl:"Yazıcıları kontrol etmek için izniniz yok",noFiles:"Yazıcı dosyalarına erişim izniniz yok",noAmsRfid:"AMS RFID'yi yeniden okumak için izniniz yok",noSmartPlugControl:"Akıllı prizleri kontrol etme izniniz yok",noCamera:"Kameraları görüntüleme izniniz yok"},modal:{addTitle:"Yazıcı Ekle",editTitle:"Yazıcıyı Düzenle",myPrinter:"Yazıcım",selectModel:"Model seç...",locationGroup:"Konum / Grup (isteğe bağlı)",locationPlaceholder:"örn., Atölye, Ofis, Bodrum",autoArchiveLabel:"Tamamlanan baskıları otomatik arşivle",fromPrinterSettings:"Yazıcı ayarlarından",modelOptional:"Model (isteğe bağlı)",saveChanges:"Değişiklikleri Kaydet"},skipObjects:{tooltip:"Nesneleri atla",onlyWhilePrinting:"Nesneleri atla (yalnızca baskı sırasında)",requiresMultiple:"Nesneleri atla (2+ nesne gerektirir)",title:"Nesneleri Atla",matchIdsInfo:"ID'leri yazıcı ekranınızla eşleştirin",printerShowsIds:"Yazıcı ekranı baskı plakasındaki nesne ID'lerini gösterir",skipSelected:"Seçilenleri Atla",skipping:"Atlanıyor...",noObjectsSelected:"Hiçbir nesne seçilmedi",selectObjectsToSkip:"Mevcut baskıdan atlamak istediğiniz nesneleri seçin",skipped:"atlandı",objectsSkipped:"Nesneler atlandı",activeCount:"{{count}} aktif",waitForLayer:"Nesneleri atlamak için 2+ katmanı bekleyin (şu an katman {{layer}})",skip:"Atla",confirmTitle:"Nesne Atlansın mı?",confirmMessage:'"{{name}}" atlamak istediğinizden emin misiniz? Bu geri alınamaz.'},confirm:{deleteTitle:"Yazıcıyı Sil",deleteMessage:'"{{name}}" silmek istediğinizden emin misiniz? Bu, tüm bağlantı ayarlarını kaldıracak.',deleteArchivesNote:"Bu yazıcı için tüm baskı geçmişi kalıcı olarak silinecek.",keepArchivesNote:"Baskı geçmişi saklanacak ancak artık bu yazıcıyla ilişkilendirilmeyecek.",stopTitle:"Baskıyı Durdur",stopMessage:'"{{name}}" üzerindeki mevcut baskıyı durdurmak istediğinizden emin misiniz? Bu, baskı işini iptal edecek.',stopButton:"Baskıyı Durdur",pauseTitle:"Baskıyı Duraklat",pauseMessage:'"{{name}}" üzerindeki mevcut baskıyı duraklatmak istediğinizden emin misiniz?',pauseButton:"Baskıyı Duraklat",resumeTitle:"Baskıya Devam Et",resumeMessage:'"{{name}}" üzerindeki baskıya devam etmek istediğinizden emin misiniz?',resumeButton:"Baskıya Devam Et",powerOnTitle:"Yazıcıyı Aç",powerOnMessage:'"{{name}}" için gücü AÇMAK istediğinizden emin misiniz?',powerOnButton:"Aç",powerOffTitle:"Yazıcıyı Kapat",powerOffMessage:'"{{name}}" için gücü KAPATMAK istediğinizden emin misiniz?',powerOffWarning:'UYARI: "{{name}}" şu anda baskı yapıyor! Gücü KAPATMAK istediğinizden emin misiniz? Bu, baskıyı kesintiye uğratacak ve yazıcıya zarar verebilir.',powerOffButton:"Kapat",haToggleTitle:'"{{name}}" Aç/Kapat',haToggleMessage:"Home Assistant varlığı {{entity}} açılıp kapatılsın mı? Şu anda açıksa güç kesilebilir.",haToggleWarning:'UYARI: "{{name}}" şu anda baskı yapıyor! {{entity}} açılıp kapatılması gücü kesip baskıyı kesintiye uğratabilir. Devam edilsin mi?',haToggleButton:"Aç/Kapat"},bulk:{select:"Seç",selectAll:"Tümünü Seç",selectByLocation:"Konuma Göre Seç",selected:"{{count}} seçildi",actions:{stop:"Durdur",pause:"Duraklat",resume:"Devam Et",clearPlate:"Tablayı Temizle",clearHMS:"Bildirimleri Temizle"},confirm:{stopTitle:"{{count}} Baskıyı Durdur",stopMessage:"Bu, {{count}} yazıcı üzerindeki aktif baskıları iptal edecek. Bu işlem geri alınamaz.",stopButton:"Hepsini Durdur",pauseTitle:"{{count}} Baskıyı Duraklat",pauseMessage:"Bu, {{count}} yazıcı üzerindeki aktif baskıları duraklatacak.",pauseButton:"Hepsini Duraklat",clearPlateTitle:"{{count}} Baskı Tablasını Temizle",clearPlateMessage:"Bu, {{count}} yazıcının baskı tablasını temizleyecek ve kuyruktaki işleri tetikleyebilir.",clearPlateButton:"Hepsini Temizle"},success:"{{count}} yazıcı üzerinde {{action}} tamamlandı",partial:"{{succeeded}} başarılı, {{failed}} başarısız",noneApplicable:"Seçilen yazıcılar bu işlem için doğru durumda değil",selectByState:"Duruma Göre Seç"},discovery:{title:"Yazıcıları Keşfet",searching:"Aranıyor...",scanning:"Taranıyor...",scanProgress:"Taranıyor... {{scanned}}/{{total}}",foundPrinters:"{{count}} yazıcı bulundu",noPrintersFound:"Yazıcı bulunamadı",noPrintersFoundSubnet:"Belirtilen alt ağda yazıcı bulunamadı.",noPrintersFoundNetwork:"Ağda yazıcı bulunamadı.",allConfigured:"Keşfedilen tüm yazıcılar zaten yapılandırılmış.",alreadyAdded:"Zaten eklendi",select:"Seç",manualEntry:"Manuel Giriş",addFromCloud:"Bulut'tan Ekle",subnetToScan:"Taranacak alt ağ",dockerNote:"Docker algılandı. Yazıcınızın alt ağını CIDR gösteriminde girin. docker-compose.yml'de network_mode: host gerektirir.",scanSubnet:"Yazıcılar için Alt Ağı Tara",discoverNetwork:"Ağda Yazıcıları Keşfet",scanningSubnet:"Bambu yazıcıları için alt ağ taranıyor...",scanningNetwork:"Ağ taranıyor...",serialRequired:"Seri numarası gerekli",unknown:"Bilinmiyor",failedToStart:"Keşif başlatılamadı",customSubnetOption:"Özel alt ağ...",customSubnetLabel:"Özel alt ağ (CIDR)",customSubnetNote:"Yazıcınız bu sunucudan farklı bir ağda ise özel bir alt ağ kullanın. FTP (990) ve MQTT (8883) bağlantı noktaları yönlendirme sınırı boyunca erişilebilir olmalıdır."},drying:{start:"Kurutmayı Başlat",stop:"Kurutmayı Durdur",temperature:"Sıcaklık",duration:"Süre",hours:"saat",timeRemaining:"{{time}} kaldı",active:"Kurutuluyor",notSupported:"Kurutma desteklenmiyor",powerRequired:"Kurutmayı etkinleştirmek için AMS güç adaptörünü bağlayın",startingDrying:"Kurutma başlatılıyor...",stoppingDrying:"Kurutma durduruluyor...",rotateTray:"Kurutma sırasında makarayı döndür"},filaments:"Filamentler",openCameraOverlay:"Kamera bindirmesini aç",openCameraWindow:"Kamerayı yeni pencerede aç",firmwareUpdateAvailable:"Firmware güncellemesi mevcut: {{current}} → {{latest}}",firmwareUpToDate:"Firmware {{version}} — Güncel",firmwareUpdateButton:"Güncelle",plateDetection:{noPermission:"Yazıcıları güncellemek için izniniz yok",enabledClick:"Plaka kontrolü etkin - Devre dışı bırakmak için tıklayın",disabledClick:"Plaka kontrolü devre dışı - Etkinleştirmek için tıklayın",manageCalibration:"Plaka algılama kalibrasyonunu yönet",calibrationRequired:"Kalibrasyon Gerekli",calibrationInstructions:"Lütfen baskı plakasının <strong>tamamen boş</strong> olduğundan emin olun, ardından Kalibre Et'e tıklayın.",calibrationDescription:"Kalibrasyon, boş plakanın referans görüntüsünü yakalar. Gelecekteki kontroller, nesneleri algılamak için bu referansa karşı karşılaştırılır.",calibrationTip:"<strong>İpucu:</strong> Farklı plakalar için 5 kalibrasyona kadar saklayabilirsiniz. Sistem, kontrol sırasında en iyi eşleşmeyi otomatik olarak kullanır.",plateEmpty:"Plaka boş görünüyor",objectsDetected:"Plakada nesneler algılandı",confidence:"Güven",difference:"Fark",analysisPreview:"Analiz önizlemesi:",analysisLegend:"Yeşil kutu = algılama alanı, Kırmızı kaplama = kalibrasyondan farklar",savedReferences:"Kaydedilen Referanslar ({{count}}/{{max}})",deleteReference:"Referansı sil",labelPlaceholder:"Etiket...",clickToEdit:"{{label}} - Düzenlemek için tıklayın",clickToAddLabel:"Etiket eklemek için tıklayın"},speed:{title:"Baskı Hızı",silent:"Sessiz (%50)",standard:"Standart (%100)",sport:"Spor (%124)",ludicrous:"Çılgın (%166)"},airduct:{title:"Hava Kanalı Modu",cooling:"Soğutma",heating:"Isıtma"},noSdCard:"SD Yok",door:{open:"Açık",closed:"Kapalı"},fans:{partCooling:"Parça Soğutma Fanı",auxiliary:"Yardımcı Fan",chamber:"Hazne Fanı"},clickToViewHmsErrors:"HMS hatalarını görüntülemek için tıklayın",estimatedCompletion:"Tahmini tamamlanma süresi",plateNumber:"Plaka {{number}}",slotOptions:"Yuva seçenekleri",amsPopup:{friendlyName:"AMS Adı",friendlyNamePlaceholder:"örn. AMS Kolay Adı",serialNumber:"Seri Numarası",firmwareVersion:"Firmware",save:"Kaydet",clear:"Temizle",noEditPermission:"AMS birimlerini yeniden adlandırma izniniz yok"},firmwareModal:{title:"Firmware Güncellemesi",titleUpToDate:"Firmware Bilgisi",currentVersion:"Mevcut:",latestVersion:"En son:",releaseNotes:"Sürüm Notları",checkingPrereqs:"Önkoşullar kontrol ediliyor...",sdCardReady:"SD kart hazır. Firmware yüklemek için aşağıya tıklayın.",uploadedSuccess:"Firmware SD karta yüklendi!",applyInstructions:"Güncellemeyi yazıcınıza uygulamak için:",step1:"Yazıcının dokunmatik ekranında <strong>Ayarlar</strong>'a gidin",step2:"<strong>Firmware</strong>'e gidin",step3:"<strong>SD karttan güncelle</strong>'yi seçin",step4:"Güncelleme 10-20 dakika sürer",done:"Tamam",starting:"Başlatılıyor...",uploadFirmware:"Firmware Yükle",uploadFailed:"Yükleme başlatılamadı: {{error}}",uploadedToast:"Firmware yüklendi! Güncellemeyi yazıcı ekranından tetikleyin.",availableVersions:"Kullanılabilir sürümler",usable:"Kullanılabilir",unavailable:"Kullanılamaz",installed:"Yüklü",newerBadge:"daha yeni",olderBadge:"daha eski",currentBadge:"mevcut"},accessCodePlaceholder:"Mevcut olanı korumak için boş bırakın",roi:{title:"Algılama Alanı (ROI)",xStart:"X Başlangıç",yStart:"Y Başlangıç",width:"Genişlik",height:"Yükseklik",instruction:"Baskı plakasına odaklanmak için algılama alanını ayarlayın. Önizlemedeki yeşil kutu mevcut alanı gösterir."},developerModeWarning:"Geliştirici LAN modu şunlarda etkin değil: {{names}}. Bazı özellikler çalışmayabilir.",howToEnable:"Nasıl etkinleştirilir",incompatibleFile:"Bu dosya {{slicedFor}} için dilimlendi, ancak bu yazıcı bir {{printerModel}}",dropNotPrintable:"Yalnızca .gcode ve .gcode.3mf dosyaları yazdırılabilir",dropToPrint:"Yazdırmak için bırakın",cannotPrint:"Yazıcı meşgul"},archives:{title:"Baskı Arşivleri",searchPlaceholder:"Arşivlerde ara...",filterByPrinter:"Yazıcıya göre filtrele",filterByStatus:"Duruma göre filtrele",sortBy:"Sıralama",sortNewest:"Önce en yeni",sortOldest:"Önce en eski",sortName:"Ad",sortDuration:"Süre",sortLargest:"Önce en büyük",sortSmallest:"Önce en küçük",sortSize:"Boyut",noArchives:"Arşiv bulunamadı",noArchivesSearch:"Aramanızla eşleşen arşiv yok",originalPrintNotVisible:"Orijinal baskı görünmüyor - filtreleri temizlemeyi deneyin",noArchivesYet:"Henüz arşiv yok",prints:"baskı",pagination:{showing:"Gösterilen",to:"-",of:"/",show:"Göster",page:"Sayfa",all:"Tümü"},loadingArchives:"Arşivler yükleniyor...",releaseToUpload:"Yüklemek için bırakın",showAll:"Tümünü göster",showFavoritesOnly:"Yalnızca favorileri göster",gridView:"Izgara görünümü",listView:"Liste görünümü",calendarView:"Takvim görünümü",logView:"Baskı Günlüğü",manageTags:"Etiketleri Yönet",showFailedPrints:"Başarısız baskıları göster",hideFailedPrints:"Başarısız baskıları gizle",hideDuplicates:"Tekrarları Gizle",viewOriginalPrint:"Orijinal baskıyı görüntülemek için tıklayın (#{{id}})",printTime:"Baskı Süresi",filamentUsed:"Kullanılan Filament",cost:"Maliyet",reprint:"Tekrar Yazdır",preview:"Önizleme",deleteArchive:"Arşivi Sil",deleteConfirm:"Bu arşivi silmek istediğinizden emin misiniz?",favorite:"Favori",unfavorite:"Favorilerden kaldır",viewDetails:"Detayları Görüntüle",status:{completed:"Tamamlandı",failed:"Başarısız",stopped:"Durduruldu"},toast:{source3mfAttached:"Kaynak 3MF eklendi: {{filename}}",failedUploadSource3mf:"Kaynak 3MF yüklenemedi",source3mfRemoved:"Kaynak 3MF kaldırıldı",failedRemoveSource3mf:"Kaynak 3MF kaldırılamadı",f3dAttached:"F3D eklendi: {{filename}}",failedUploadF3d:"F3D yüklenemedi",f3dRemoved:"F3D kaldırıldı",failedRemoveF3d:"F3D kaldırılamadı",timelapseAttached:"Zaman atlamalı video eklendi: {{filename}}",timelapseAlreadyAttached:"Zaman atlamalı video zaten eklendi",noMatchingTimelapse:"Eşleşen zaman atlamalı video bulunamadı",failedScanTimelapse:"Zaman atlamalı video taranamadı",failedAttachTimelapse:"Zaman atlamalı video eklenemedi",timelapseRemoved:"Zaman atlamalı video kaldırıldı",failedRemoveTimelapse:"Zaman atlamalı video kaldırılamadı",timelapseUploaded:"Zaman atlamalı video yüklendi: {{filename}}",failedUploadTimelapse:"Zaman atlamalı video yüklenemedi",archiveDeleted:"Arşiv silindi",failedDeleteArchive:"Arşiv silinemedi",addedToFavorites:"Favorilere eklendi",removedFromFavorites:"Favorilerden kaldırıldı",projectUpdated:"Proje güncellendi",failedUpdateProject:"Proje güncellenemedi",linkCopied:"Bağlantı panoya kopyalandı",failedCopyLink:"Bağlantı kopyalanamadı",photoDeleted:"Fotoğraf silindi",failedDeletePhoto:"Fotoğraf silinemedi",failedDeleteArchives:"Arşivler silinemedi",failedUpdateFavorites:"Favoriler güncellenemedi",exportDownloaded:"Dışa aktarma indirildi",exportFailed:"Dışa aktarma başarısız"},menu:{print:"Yazdır",schedule:"Zamanla",openInBambuStudio:"Dilimleyicide Aç",slice:"Dilimle",externalLink:"Harici Bağlantı",viewOnMakerWorld:"MakerWorld'de Görüntüle",preview3d:"3B Önizleme",viewTimelapse:"Zaman Atlamalı Videoyu Görüntüle",scanForTimelapse:"Zaman Atlamalı Video Tara",uploadTimelapse:"Zaman Atlamalı Video Yükle",removeTimelapse:"Zaman Atlamalı Videoyu Kaldır",downloadSource3mf:"Kaynak 3MF İndir",uploadSource3mf:"Kaynak 3MF Yükle",replaceSource3mf:"Kaynak 3MF Değiştir",removeSource3mf:"Kaynak 3MF Kaldır",uploadF3d:"F3D Yükle",replaceF3d:"F3D Değiştir",downloadF3d:"F3D İndir",removeF3d:"F3D Kaldır",download:"İndir",copyDownloadLink:"İndirme Bağlantısını Kopyala",qrCode:"QR Kod",viewPhotos:"Fotoğrafları Görüntüle",viewPhotosCount:"Fotoğrafları Görüntüle ({{count}})",projectPage:"Proje Sayfası",addToFavorites:"Favorilere Ekle",removeFromFavorites:"Favorilerden Kaldır",edit:"Düzenle",printLog:"Baskı Günlüğü",goToProject:"Projeye Git: {{name}}",addToProject:"Projeye Ekle",removeFromProject:"Projeden Kaldır",loading:"Yükleniyor...",noProjectsAvailable:"Kullanılabilir proje yok",searchProjects:"Projelerde ara…",select:"Seç",deselect:"Seçimi Kaldır",delete:"Sil"},permission:{noReprint:"Bu arşivi yeniden yazdırma izniniz yok",noAddToQueue:"Kuyruğa ekleme izniniz yok",noUpdateArchives:"Arşivleri güncelleme izniniz yok",noUploadFiles:"Dosya yükleme izniniz yok",noDownload:"Arşivleri indirme izniniz yok",noCopyLink:"İndirme bağlantılarını kopyalama izniniz yok",noDelete:"Bu arşivi silme izniniz yok",noCreate:"Arşiv oluşturma izniniz yok"},platePicker:{title:"Önizleme için plaka seçin",hint:"Bu arşivde birden fazla plaka var. GCode görüntüleyicide açmak için birini seçin.",plateLabel:"Plaka {{index}}",objectCount:"{{count}} nesne",objectCount_plural:"{{count}} nesne",noGcode:"Bu arşivin önizleme için dilimlenmiş G-kodu yok. Önce dilimlemek için Bambu Studio'da açın."},card:{previousPlate:"Önceki plaka",nextPlate:"Sonraki plaka",plateNumber:"Plaka {{index}}",moreOptions:"Daha fazla seçenek için sağ tıklayın",addToFavorites:"Favorilere ekle",removeFromFavorites:"Favorilerden kaldır",cancelled:"iptal edildi",failed:"başarısız",duplicate:"tekrar",duplicateTitle:"Bu model daha önce yazdırıldı",openSource3mf:"Kaynak 3MF'yi Bambu Studio'da aç (daha fazla seçenek için sağ tıklayın)",downloadF3d:"Fusion 360 tasarım dosyasını indir",viewTimelapse:"Zaman atlamalı videoyu görüntüle",viewPhoto:"1 fotoğrafı görüntüle",viewPhotos:"{{count}} fotoğrafı görüntüle",openFolder:"Klasörü aç: {{name}}",slicedFile:"Dilimlenmiş dosya - yazdırmaya hazır",sourceFile:"Yalnızca kaynak dosya - AMS eşlemesi mevcut değil",gcode:"GCODE",source:"KAYNAK",project:"Proje: {{name}}",runsBadge:"{{count}} baskı",runsBadgeTitle:"Toplam {{count}} baskı — {{successful}} başarılı, {{failed}} başarısız. Tam baskı günlüğünü görmek için tıklayın.",estimated:"Tahmini: {{time}}",actual:"Gerçek: {{time}}",accuracy:"Doğruluk: %{{percent}}",filament:"{{weight}}g",layer:"{{count}} katman",layers:"{{count}} katman",object:"{{count}} nesne",objects:"{{count}} nesne",slicedFor:"{{model}} için dilimlendi",uploadedBy:"Yükleyen",noPermissionReprint:"Yeniden yazdırma izniniz yok",noFileForReprint:"Kullanılabilir 3MF dosyası yok — baskı kaydedildiğinde dosya yazıcıdan indirilemedi",noPermissionEdit:"Arşivleri düzenleme izniniz yok",noPermissionDelete:"Arşivleri silme izniniz yok",reprint:"Tekrar Yazdır",schedulePrint:"Baskıyı Zamanla",schedule:"Zamanla",openInBambuStudio:"Dilimleyicide Aç",openInBambuStudioToSlice:"Dilimlemek için Dilimleyicide Aç",slice:"Dilimle",externalLink:"Harici Bağlantı",makerWorld:"MakerWorld: {{designer}}",viewProject:"Projeyi görüntüle",noExternalLink:"Harici bağlantı yok",preview3d:"3B Önizleme",download:"İndir",edit:"Düzenle",delete:"Sil"},runLog:{title:"Baskı Günlüğü",modalTitle:"Baskı Günlüğü — {{name}}",modalTitleFallback:"bu arşiv",empty:"Bu arşiv için henüz baskı olayı kaydedilmedi.",col:{date:"Tarih",status:"Durum",duration:"Süre",filament:"Filament",cost:"Maliyet"},status:{completed:"Tamamlandı",failed:"Başarısız",cancelled:"İptal edildi",stopped:"Durduruldu",skipped:"Atlandı",printing:"Yazdırılıyor"}},modal:{deleteArchive:"Arşivi Sil",deleteConfirm:'"{{name}}" silmek istediğinizden emin misiniz? Bu işlem geri alınamaz.',deleteButton:"Sil",deletePurgeStats:"Ayrıca bu baskıyı Hızlı İstatistiklerden de kaldır (filament, süre, maliyet, enerji)",removeSource3mf:"Kaynak 3MF Kaldır",removeSource3mfConfirm:'"{{name}}" dosyasından kaynak 3MF dosyasını kaldırmak istediğinizden emin misiniz? Bu, orijinal dilimleyici proje dosyasını silecek.',removeButton:"Kaldır",removeF3d:"F3D Kaldır",removeF3dConfirm:'"{{name}}" dosyasından Fusion 360 tasarım dosyasını kaldırmak istediğinizden emin misiniz?',removeTimelapse:"Zaman Atlamalı Videoyu Kaldır",removeTimelapseConfirm:'"{{name}}" dosyasından zaman atlamalı videoyu kaldırmak istediğinizden emin misiniz?',timelapse:"{{name}} - Zaman Atlamalı Video",selectTimelapse:"Zaman Atlamalı Video Seç",selectTimelapseDesc:"Otomatik eşleşme bulunamadı. Bu baskı için zaman atlamalı videoyu seçin:",deleteArchives:"Arşivleri Sil",deleteArchivesConfirm:"{{count}} arşivi silmek istediğinizden emin misiniz? Bu işlem geri alınamaz.",deleteCount:"{{count}} Sil"},page:{title:"Arşivler",printsCount:"{{total}} baskıdan {{filtered}} tanesi",dropFilesHere:".3mf dosyalarını buraya bırakın",releaseToUpload:"Yüklemek için bırakın",only3mfSupported:"Yalnızca .3mf dosyaları desteklenir",close:"Kapat",selected:"{{count}} seçildi",selectAll:"Tümünü Seç",tags:"Etiketler",project:"Proje",favorite:"Favori",delete:"Sil",toggledFavorites:"{{count}} arşiv için favoriler değiştirildi",failedUpdateFavorites:"Favoriler güncellenemedi",archivesDeleted:"{{count}} arşiv silindi",failedDeleteArchives:"Arşivler silinemedi",photoDeleted:"Fotoğraf silindi",failedDeletePhoto:"Fotoğraf silinemedi"},list:{name:"Ad",printer:"Yazıcı",date:"Tarih",size:"Boyut",actions:"İşlemler",hasTimelapse:"Zaman atlamalı videosu var"},log:{date:"Tarih",printName:"Baskı Adı",printer:"Yazıcı",user:"Kullanıcı",status:"Durum",duration:"Süre",filament:"Filament",allPrinters:"Tüm Yazıcılar",allUsers:"Tüm Kullanıcılar",allStatuses:"Tüm Durumlar",cancelled:"İptal edildi",skipped:"Atlandı",dateFrom:"Başlangıç",dateTo:"Bitiş",noEntries:"Baskı günlüğü kaydı bulunamadı",showing:"{{total}} kayıttan {{count}} tanesi gösteriliyor",rowsPerPage:"Satır",page:"Sayfa",prev:"Önceki",next:"Sonraki",clearLog:"Günlüğü Temizle",clearLogTitle:"Baskı Günlüğünü Temizle",clearLogConfirm:"Tüm baskı günlüğü kayıtları kalıcı olarak silinecek. Arşivler ve kuyruk öğeleri etkilenmeyecek. Bu işlem geri alınamaz. Emin misiniz?",clearLogButton:"Hepsini Temizle",cleared:"{{count}} günlük kaydı temizlendi",clearFailed:"Baskı günlüğü temizlenemedi"}},queue:{title:"Baskı Kuyruğu",subtitle:"Baskı işlerinizi zamanlayın ve yönetin",addToQueue:"Kuyruğa Ekle",filamentShort:{rowBadge:"Atanan makara için yetersiz filament",rowTooltip:"Sevk planlayıcı bu öğeyi işaretledi. Yuva başına eksikliği görmek ve yine de yazdırıp yazdırmayacağınıza karar vermek için Oynat'a tıklayın.",confirmTitle:"Yetersiz filament",confirmIntro:"Atanan makara en az bir yuvayı karşılayamıyor. Yine de yazdırılsın mı?",lineItem:"Yuva {{slot}}: {{required}} g gerekli, {{remaining}} g kaldı",unknown:"bilinmiyor",printAnyway:"Yine de Yazdır"},print:"Yazdır",reprint:"Tekrar Yazdır",schedulePrint:"Baskıyı Zamanla",editQueueItem:"Kuyruk Öğesini Düzenle",printToPrinters:"{{count}} Yazıcıya Yazdır",queueToPrinters:"{{count}} Yazıcıya Kuyrukla",queueSelectedPlates:"{{count}} Plakayı Kuyrukla",selectAllPlates:"Tüm {{count}} Plakayı Seç",deselectAll:"Seçimi Kaldır",printQueued:"Baskı kuyruğa eklendi",itemsQueued:"{{count}} öğe kuyruğa eklendi",sending:"Gönderiliyor...",sendingProgress:"Gönderiliyor {{current}}/{{total}}...",adding:"Ekleniyor...",addingProgress:"Ekleniyor {{current}}/{{total}}...",savingProgress:"Kaydediliyor {{current}}/{{total}}...",clearQueue:"Kuyruğu Temizle",clearHistory:"Geçmişi Temizle",emptyQueue:"Kuyruk boş",position:"Konum",scheduledTime:"Zamanlanmış Süre",moveUp:"Yukarı Taşı",moveDown:"Aşağı Taşı",startNow:"Şimdi Başlat",printingInProgress:"Baskı devam ediyor...",viewArchive:"Arşivi görüntüle",viewInFileManager:"Dosya Yöneticisinde görüntüle",itemCount:"{{count}} öğe",itemCount_plural:"{{count}} öğe",dragToReorder:"Yeniden sıralamak için sürükleyin (yalnızca ASAP)",reorderHint:"Konum yalnızca ASAP öğelerini etkiler. Zamanlanmış öğeler belirlenen zamanlarında çalışır.",sjf:{label:"SJF",tooltip:"En Kısa İş İlk — planlayıcı daha kısa baskılara öncelik verir"},addedBy:"{{name}} tarafından eklendi",nextInQueue:"Kuyrukta sıradaki",clearPlateSuccess:"Plaka temizlendi — sonraki baskıya hazır",plateNumber:"Plaka {{index}}",quantity:"Miktar",quantityHint:"{{count}} kuyruk öğesi oluşturur",activeBatches:"Aktif Yığınlar",batchProgress:"{{total}} öğeden {{completed}} tanesi tamamlandı",cancelBatch:"Kalanları İptal Et",batchCancelled:"Kalan yığın öğeleri iptal edildi",cancelBatchConfirmTitle:"Yığını İptal Et",cancelBatchConfirmMessage:"Bu yığındaki tüm bekleyen öğeler iptal edilsin mi?",batch:"Yığın",sections:{currentlyPrinting:"Şu Anda Yazdırılan",queued:"Kuyruktaki",history:"Geçmiş"},status:{pending:"Beklemede",waiting:"Bekliyor",printing:"Yazdırılıyor",paused:"Duraklatıldı",completed:"Tamamlandı",failed:"Başarısız",skipped:"Atlandı",cancelled:"İptal edildi"},summary:{printing:"Yazdırılıyor",queued:"Kuyrukta",totalTime:"Toplam Kuyruk Süresi",totalWeight:"Toplam Kuyruk Ağırlığı",history:"Geçmiş"},filter:{allPrinters:"Tüm Yazıcılar",unassigned:"Atanmamış",allStatus:"Tüm Durumlar",allLocations:"Tüm Konumlar",any:"Herhangi"},sort:{byPosition:"Konuma Göre Sırala",byName:"Ada Göre Sırala",byPrinter:"Yazıcıya Göre Sırala",bySchedule:"Zamana Göre Sırala",byDate:"Tarihe Göre Sırala",ascendingOldest:"Artan (önce en eski)",descendingNewest:"Azalan (önce en yeni)"},badges:{staged:"Hazırlandı",requiresPrevious:"Önceki başarı gerekli",autoPowerOff:"Otomatik kapanma",gcodeInjection:"G-kod"},empty:{title:"Zamanlanmış baskı yok",description:'Bağlam menüsündeki "Zamanla" seçeneğini kullanarak Arşivler sayfasından bir baskı zamanlayın veya başlamak için dosyaları sürükleyip bırakın.'},time:{asap:"ASAP",overdue:"Gecikmiş",now:"Şimdi",lessThanMinute:"Bir dakikadan az",inMinutes:"{{count}} dk içinde",inHours:"{{count}} saat içinde"},actions:{stopPrint:"Baskıyı Durdur",startPrint:"Baskıyı Başlat",requeue:"Yeniden Kuyrukla"},bulkEdit:{title:"{{count}} Öğeyi Düzenle",title_plural:"{{count}} Öğeyi Düzenle",description:"Yalnızca değiştirilen ayarlar seçili öğelere uygulanacak.",printer:"Yazıcı",noChange:"— Değişiklik yok —",queueOptions:"Kuyruk Seçenekleri",staged:"Hazırlandı (manuel başlatma)",autoPowerOff:"Baskı sonrası otomatik kapanma",requirePrevious:"Önceki başarı gerekli",printOptions:"Baskı Seçenekleri",bedLevelling:"Tabla seviyelendirme",flowCalibration:"Akış kalibrasyonu",vibrationCalibration:"Titreşim kalibrasyonu",layerInspection:"İlk katman denetimi",timelapse:"Zaman atlamalı video",useAms:"AMS Kullan",applyChanges:"Değişiklikleri Uygula",selectAll:"Tümünü Seç",deselectAll:"Seçimi Kaldır",selected:"{{count}} seçildi",editSelected:"Seçilenleri Düzenle",cancelSelected:"Seçilenleri İptal Et"},confirm:{cancelTitle:"Zamanlanmış Baskıyı İptal Et",cancelMessage:'"{{name}}" iptal etmek istediğinizden emin misiniz?',stopTitle:"Baskıyı Durdur",stopMessage:'"{{name}}" mevcut baskıyı durdurmak istediğinizden emin misiniz? Bu, yazıcıdaki baskı işini iptal edecek.',removeTitle:"Geçmişten Kaldır",removeMessage:'"{{name}}" kuyruk geçmişinden kaldırmak istediğinizden emin misiniz?',clearHistoryTitle:"Geçmişi Temizle",clearHistoryMessage:"Geçmişten {{count}} öğenin tümünü kaldırmak istediğinizden emin misiniz?",cancelButton:"Baskıyı İptal Et",stopButton:"Baskıyı Durdur",thisPrint:"bu baskı",thisItem:"bu öğe"},toast:{cancelled:"Kuyruk öğesi iptal edildi",cancelFailed:"Öğe iptal edilemedi",removed:"Kuyruk öğesi kaldırıldı",removeFailed:"Öğe kaldırılamadı",stopped:"Baskı durduruldu",stopFailed:"Baskı durdurulamadı",released:"Baskı kuyruğa bırakıldı",startFailed:"Baskı başlatılamadı",reorderFailed:"Kuyruk yeniden sıralanamadı",historyCleared:"{{count}} geçmiş öğesi temizlendi",clearHistoryFailed:"Geçmiş temizlenemedi",updateFailed:"Öğeler güncellenemedi",bulkCancelled:"{{count}} öğe iptal edildi",bulkCancelFailed:"Öğeler iptal edilemedi"},timeline:{listView:"Liste",timelineView:"Zaman Çizelgesi",unassigned:"Atanmamış",noData:"Bu gün için zamanlanmış baskı yok",allDoneBy:"Tüm baskıların {{time}}'e kadar bitmesi tahmin ediliyor",staged:"Hazırlandı",filterAll:"Tümünü Göster",filterPrinting:"Yazdırılıyor",filterQueued:"Kuyrukta",time:{anyMoment:"her an",minutesLeft:"{{minutes}}dk kaldı",hoursLeft:"{{hours}}sa kaldı",hoursMinutesLeft:"{{hours}}sa {{minutes}}dk kaldı"},day:{previous:"Önceki gün",next:"Sonraki gün",today:"Bugün"}},permissions:{noStopPrint:"Baskıları durdurma izniniz yok",noStartPrint:"Baskıları başlatma izniniz yok",noEdit:"Bu kuyruk öğesini düzenleme izniniz yok",noCancel:"Bu kuyruk öğesini iptal etme izniniz yok",noRequeue:"Öğeleri yeniden kuyruklama izniniz yok",noRemove:"Bu kuyruk öğesini kaldırma izniniz yok",noClearHistory:"Tüm geçmişi temizleme izniniz yok",noEditItems:"Kuyruk öğelerini düzenleme izniniz yok",noCancelItems:"Kuyruk öğelerini iptal etme izniniz yok"}},backgroundDispatch:{unknownFile:"Bilinmeyen dosya",unknownPrinter:"Bilinmeyen yazıcı",startingPrints:"Baskılar başlatılıyor",progressSummary:"{{complete}}/{{total}} tamamlandı • Sevk edildi: {{dispatched}} • İşleniyor: {{processing}}",expandDetails:"Sevk ayrıntılarını genişlet",collapseDetails:"Sevk ayrıntılarını daralt",dismissToast:"Sevk bildirimini kapat",cancelDispatchJob:"Sevk işini iptal et",cancel:"İptal",cancelling:"İptal ediliyor…",awaitingPrinter:"Yazıcı bekleniyor…",status:{dispatched:"Sevk Edildi",processing:"İşleniyor",completed:"Tamamlandı",failed:"Başarısız",cancelled:"İptal edildi"},toast:{cancellingUpload:"Yükleme iptal ediliyor...",cancelled:"Sevk iptal edildi",cancelFailed:"Sevk iptal edilemedi",completeWithFailures:"Arka plan sevki tamamlandı: {{completed}} başarılı, {{failed}} başarısız",completeSuccess:"Arka plan sevki tamamlandı: {{completed}} başarılı",printStartedRemaining:"{{completed}} baskı başlatıldı, {{remaining}} tane daha gönderiliyor..."}},stats:{title:"İstatistikler",subtitle:"Yeniden düzenlemek için widget'ları sürükleyin. Gizlemek için göz simgesine tıklayın.",overview:"Genel Bakış",totalPrints:"Toplam Baskı",successRate:"Başarı Oranı",totalPrintTime:"Toplam Baskı Süresi",printTime:"Baskı Süresi",totalFilament:"Toplam Kullanılan Filament",filamentUsed:"Kullanılan Filament",filamentCost:"Filament Maliyeti",totalCost:"Toplam Maliyet",energyUsed:"Kullanılan Enerji",energyCost:"Enerji Maliyeti",energyWarmingUpTooltip:"Enerji takibi hâlâ saatlik anlık görüntüler topluyor. Tarih aralığı toplamları, seçilen aralıktan önce en az bir anlık görüntü olduğunda doğru hâle gelir. Erken değerler eksik sayabilir.",averagePrintTime:"Ortalama Baskı Süresi",printsPerDay:"Günlük Baskı",byPrinter:"Yazıcıya Göre",printsByPrinter:"Yazıcıya Göre Baskılar",byMaterial:"Malzemeye Göre",byMonth:"Aya Göre",last7Days:"Son 7 Gün",last30Days:"Son 30 Gün",last90Days:"Son 90 Gün",allTime:"Tüm Zamanlar",quickStats:"Hızlı İstatistikler",printActivity:"Baskı Etkinliği",filamentTypes:"Filament Türleri",filamentTrends:"Filament Trendleri",failureAnalysis:"Başarısızlık Analizi",timeAccuracy:"Süre Doğruluğu",successful:"Başarılı:",failed:"Başarısız:",cancelled:"İptal edildi:",perfectEstimate:"%100 = mükemmel tahmin",noTimeAccuracyData:"Henüz süre doğruluğu verisi yok",noFilamentData:"Filament verisi mevcut değil",noPrinterData:"Yazıcı verisi mevcut değil",noPrintData:"Baskı verisi mevcut değil",noPrintDataLast30Days:"Son 30 günde baskı verisi yok",failureReasons:"Başarısızlık Nedenleri",topFailureReasons:"En Sık Başarısızlık Nedenleri",failedPrintsCount:"{{total}} baskının {{failed}} tanesi başarısız",lastWeekRate:"Geçen hafta: %{{rate}}",resetLayout:"Düzeni Sıfırla",recalculateCosts:"Maliyetleri Yeniden Hesapla",recalculateCostsHint:"Mevcut filament fiyatlarını kullanarak tüm arşiv maliyetlerini yeniden hesapla",exportStats:"İstatistikleri Dışa Aktar",exportAsCsv:"CSV Olarak Dışa Aktar",exportAsExcel:"Excel Olarak Dışa Aktar",hiddenCount:"{{count}} Gizli",exportDownloaded:"Dışa aktarma indirildi",exportFailed:"Dışa aktarma başarısız",layoutReset:"Düzen sıfırlandı",recalculatedCosts:"{{count}} arşiv için maliyetler yeniden hesaplandı",recalculateFailed:"Maliyetler yeniden hesaplanamadı",loadingStats:"İstatistikler yükleniyor...",noPermissionResetLayout:"Düzeni sıfırlama izniniz yok",noPermissionRecalculate:"Maliyetleri yeniden hesaplama izniniz yok",noPrintDataInRange:"Seçili aralıkta baskı verisi yok",periodFilament:"Dönem Filamenti",periodCost:"Dönem Maliyeti",avgPerPrint:"Baskı Başına Ort.",usageOverTime:"Zaman İçinde Kullanım",filamentByWeight:"Ağırlık",printDuration:"Baskı Süresi",printerUtilization:"Yazıcı Kullanımı",filamentSuccess:"Malzemeye Göre Başarı",printHabits:"Baskı Alışkanlıkları",printTimeOfDay:"Günün Baskı Saati",colorDistribution:"Renk Dağılımı",noColorData:"Renk verisi mevcut değil",records:"Kayıtlar",longestPrint:"En Uzun Baskı",heaviestPrint:"En Ağır Baskı",mostExpensivePrint:"En Pahalı",busiestDay:"En Yoğun Gün",successStreak:"Başarı Serisi",streakPrint:"ardışık baskı",streakPrints:"{{count}} ardışık baskı",printerStats:"Yazıcı İstatistikleri",hours:"saat",avgPrints:"Ort. baskı",noArchiveData:"Baskı verisi mevcut değil",filamentByTime:"Süre",avgWeight:"Ort. ağırlık",avgTime:"Ort. süre",filamentByPrints:"Baskılar",timeframe:{today:"Bugün","this-week":"Bu Hafta","this-month":"Bu Ay","last-7":"Son 7 Gün","last-30":"Son 30 Gün","last-90":"Son 90 Gün","this-year":"Bu Yıl","all-time":"Tüm Zamanlar",custom:"Özel Aralık",from:"Başlangıç",to:"Bitiş"},allUsers:"Tüm Kullanıcılar",noUser:"Kullanıcı Yok (Sistem)",filterByUser:"Kullanıcıya Göre Filtrele"},maintenance:{title:"Bakım",overview:"Genel Bakış",allOk:"Tüm bakım güncel",dueCount:"{{count}} öğe bekliyor",dueCount_plural:"{{count}} öğe bekliyor",warningCount:"{{count}} uyarı",warningCount_plural:"{{count}} uyarı",totalPrintTime:"Toplam Baskı Süresi",nextMaintenance:"Sonraki Bakım",nothingDue:"Bekleyen yok",tasks:"Görevler",lastPerformed:"Son yapılan",interval:"Aralık",hoursRemaining:"{{hours}}sa kaldı",hoursOverdue:"{{hours}}sa gecikmiş",markDone:"Tamamlandı Olarak İşaretle",performMaintenance:"Bakım Gerçekleştir",history:"Geçmiş",noHistory:"Bakım geçmişi yok",editPrintHours:"Baskı Saatlerini Düzenle",currentHours:"Mevcut Saat",statusTab:"Durum",settingsTab:"Ayarlar",overdueCount:"{{count}} gecikmiş",dueSoonCount:"{{count}} yakında",dueSoon:"Yakında",allGood:"Her şey iyi",overdueBy:"{{duration}} gecikmiş",dueIn:"{{duration}} içinde",timeLeft:"{{duration}} kaldı",day:"1 gün",days:"{{count}} gün",week:"1 hafta",weeks:"{{count}} hafta",month:"1 ay",months:"{{count}} ay",year:"1 yıl",maintenanceTypes:"Bakım Türleri",maintenanceTypesDescription:"Sistem türleri ve özel bakım görevleriniz",addCustomType:"Özel Tür Ekle",restoreDefaults:"Varsayılan Görevleri Geri Yükle",intervalType:"Aralık Türü",intervalValue:"Aralık ({{type}})",icon:"Simge",documentationLink:"Dokümantasyon Bağlantısı (isteğe bağlı)",assignToPrinters:"Yazıcılara Ata",selectAtLeastOnePrinter:"En az bir yazıcı seçin",addType:"Tür Ekle",custom:"Özel",printHours:"Baskı Saatleri",calendarDays:"Takvim Günleri",exampleName:"örn., HEPA Filtresini Değiştir",viewDocumentation:"Dokümantasyonu görüntüle",timeBasedInterval:"Zaman tabanlı aralık",intervalOverrides:"Aralık Geçersiz Kılmaları",intervalOverridesDescription:"Belirli yazıcılar için aralıkları özelleştir",assignedToPrinters:"Atanan yazıcılar:",noPrintersAssigned:"Atanan yazıcı yok",addPrinterShort:"Ekle:",printersAssignedClick:"{{count}} yazıcı atandı - yönetmek için tıklayın",removeFromPrinter:"Bu yazıcıdan kaldır",types:{lubricateCarbonRods:"Karbon Çubukları Yağla",lubricateRails:"Lineer Rayları Yağla",cleanNozzle:"Nozulu/Hotend Temizle",checkBelts:"Kayış Gerginliğini Kontrol Et",cleanBuildPlate:"Baskı Plakasını Temizle",checkExtruder:"Ekstrüder Dişlilerini Kontrol Et",checkCooling:"Soğutma Fanlarını Kontrol Et",generalInspection:"Genel Denetim",cleanCarbonRods:"Karbon Çubukları Temizle",lubricateSteelRods:"Çelik Çubukları Yağla",cleanSteelRods:"Çelik Çubukları Temizle",cleanLinearRails:"Lineer Rayları Temizle",checkPtfeTube:"PTFE Tüpünü Kontrol Et",replaceHepaFilter:"HEPA Filtresini Değiştir",replaceCarbonFilter:"Karbon Filtresini Değiştir",lubricateLeftNozzleRail:"Sol Nozul Rayını Yağla"},maintenanceComplete:"Bakım tamamlandı olarak işaretlendi",typeUpdated:"Bakım türü güncellendi",typeDeleted:"Bakım türü silindi",defaultsRestored:"{{count}} varsayılan görev geri yüklendi",printHoursUpdated:"Baskı saatleri güncellendi",printerAssigned:"Yazıcı atandı",printerRemoved:"Yazıcı kaldırıldı",deleteTypeConfirm:'"{{name}}" silinsin mi?',deleteSystemTypeTitle:"Varsayılan bakım görevi silinsin mi?",deleteSystemTypeMessage:'"{{name}}" varsayılan bakım görevini silmek istediğinizden emin misiniz?',noPermissionUpdate:"Bakım öğelerini güncelleme izniniz yok",noPermissionPerform:"Bakım gerçekleştirme izniniz yok",noPermissionEditTypes:"Bakım türlerini düzenleme izniniz yok",noPermissionDeleteTypes:"Bakım türlerini silme izniniz yok",noPermissionEditHours:"Baskı saatlerini düzenleme izniniz yok",noPermissionRemovePrinter:"Yazıcı atamalarını kaldırma izniniz yok",noPermissionAssignPrinter:"Yazıcı atama izniniz yok",noPermissionEditIntervals:"Aralıkları düzenleme izniniz yok",configureSettings:"Bakım türlerini ve aralıklarını yapılandır"},settings:{title:"Ayarlar",general:"Genel",tabs:{general:"Genel",smartPlugs:"Akıllı Prizler",notifications:"Bildirimler",queue:"İş Akışı",filament:"Filament",network:"Ağ",apiKeys:"API Anahtarları",virtualPrinter:"Sanal Yazıcı",spoolbuddy:"SpoolBuddy",failureDetection:"Başarısızlık Algılama",users:"Kimlik Doğrulama",backup:"Yedekleme",emailAuth:"E-posta Kimlik Doğrulama",ldap:"LDAP",twoFa:"İki Faktörlü Kimlik Doğrulama",oidc:"SSO / OIDC",security:"Güvenlik"},spoolbuddy:{infoTitle:"SpoolBuddy cihazları",infoBody:"SpoolBuddy kioskları heartbeat üzerinden otomatik olarak kayıt olur. Artık kullanılmıyorsa veya bir daemon çökmesi nedeniyle eski bir kopya kaldıysa bir cihazı buradan kayıttan çıkarın.",duplicatesTitle:"{{count}} cihaz kayıtlı",duplicatesBody:"Yalnızca ilk kayıtlı cihaz kiosk arayüzü tarafından kullanılır. Bunlardan biri çökme sonucu kalmış eski bir kopya ise kayıttan çıkarın — çevrimiçi bir cihaz sonraki heartbeat'inde kendini yeniden kaydedecek.",empty:"Henüz kayıtlı SpoolBuddy cihazı yok.",online:"Çevrimiçi",offline:"Çevrimdışı",unregister:"Kayıttan Çıkar",unregisterSuccess:"Cihaz kayıttan çıkarıldı",unregisterError:"Cihaz kayıttan çıkarılamadı",confirmTitle:"SpoolBuddy cihazı kayıttan çıkarılsın mı?",confirmBody:`Bu, "{{hostname}}" ({{deviceId}}) cihazını veritabanından kaldıracak. Cihaz çevrimiçiyse, sonraki heartbeat'inde kendini yeniden kaydedecek.`,ipAddress:"IP adresi",firmware:"Firmware",lastSeen:"Son görülme",daemonUptime:"Daemon çalışma süresi",systemUptime:"Sistem çalışma süresi",never:"asla",nfc:"NFC",scale:"Tartı",cpuTemp:"CPU sıcaklığı",cpuLoad:"CPU yükü",memory:"Bellek",disk:"Disk",update:"Güncelle",updateConfirmTitle:"Spoolbuddy daemon güncellensin mi?",updateConfirmBody:'"{{hostname}}" cihazında yazılım güncellemesi tetiklensin mi? Güncelleme uygulandığında daemon yeniden başlayacak.',restartBrowser:"Tarayıcıyı Yeniden Başlat",restartBrowserConfirmTitle:"Kiosk tarayıcısı yeniden başlatılsın mı?",restartBrowserConfirmBody:'"{{hostname}}" cihazındaki kiosk tarayıcısı yeniden başlatılsın mı? Ekran kısa bir süre kararacak.',restartDaemon:"Daemon'u Yeniden Başlat",restartDaemonConfirmTitle:"Spoolbuddy daemon yeniden başlatılsın mı?",restartDaemonConfirmBody:'"{{hostname}}" üzerindeki Spoolbuddy daemon yeniden başlatılsın mı? Cihaz birkaç saniye çevrimdışı olacak.',reboot:"Yeniden Başlat",rebootConfirmTitle:"Cihaz yeniden başlatılsın mı?",rebootConfirmBody:'"{{hostname}}" yeniden başlatılsın mı? Cihaz yaklaşık bir dakika çevrimdışı olacak.',shutdown:"Kapat",shutdownConfirmTitle:"Cihaz kapatılsın mı?",shutdownConfirmBody:'"{{hostname}}" kapatılsın mı? Tekrar açmak için fiziksel erişime ihtiyacınız olacak.',commandConfirm:"Onayla",commandQueued:"Komut kuyruğa alındı",commandError:"Komut gönderilemedi"},ldap:{title:"LDAP Kimlik Doğrulama",enabledDesc:"LDAP kimlik doğrulama etkin",disabledDesc:"LDAP kimlik doğrulama devre dışı",disabledHint:"Aşağıdaki LDAP ayarlarını yapılandırın ve kaydedin, ardından etkinleştirin.",enabled:"LDAP kimlik doğrulama etkinleştirildi",disabled:"LDAP kimlik doğrulama devre dışı bırakıldı",feature1:"Kullanıcılar LDAP kimlik bilgileriyle giriş yapabilir",feature2:"Yerel yönetici hesabı yedek olarak kalır",feature3:"LDAP grupları giriş sırasında BamBuddy gruplarına eşlenir",serverConfig:"LDAP Sunucu Yapılandırması",serverUrl:"Sunucu URL",serverUrlHint:"SSL için ldaps:// veya StartTLS ile ldap:// kullanın",security:"Güvenlik",securityHint:"StartTLS düz bir bağlantıyı TLS'ye yükseltir. LDAPS başlangıçtan itibaren TLS kullanır.",bindDn:"Bind DN (Servis Hesabı)",bindPassword:"Bind Parolası",searchBase:"Arama Tabanı DN",userFilter:"Kullanıcı Arama Filtresi",userFilterHint:"{username} giriş kullanıcı adıyla değiştirilir. OpenLDAP için (uid={username}) kullanın.",advanced:"Gelişmiş",autoProvision:"Kullanıcıları otomatik tedarik et",autoProvisionHint:"İlk LDAP girişinde otomatik olarak BamBuddy hesabı oluştur",defaultGroup:"Varsayılan grup",defaultGroupNone:"— Hiçbiri (yedek yok) —",defaultGroupHint:"Bir LDAP kullanıcısı kimlik doğruladığında ancak eşlenmiş herhangi bir LDAP grubunda listelenmediğinde atanan yedek grup. Eşlenmemiş kullanıcıları izinsiz bırakmak için boş bırakın.",groupMapping:"Grup Eşleme (JSON)",groupMappingHint:"LDAP grup DN'lerini BamBuddy gruplarına eşle. Kullanılabilir gruplar: ",testConnection:"Bağlantıyı Test Et",settingsSaved:"LDAP ayarları kaydedildi",errors:{serverRequired:"LDAP sunucu URL gerekli",searchBaseRequired:"Arama tabanı DN gerekli",enableAuthFirst:"Önce kimlik doğrulamayı etkinleştirin",configureLdapFirst:"Önce LDAP ayarlarını kaydedin"}},email:{smtpSettings:"SMTP Yapılandırması",smtpHost:"SMTP Sunucusu",smtpPort:"SMTP Portu",security:"Güvenlik",authentication:"Kimlik Doğrulama",username:"Kullanıcı Adı",password:"Parola",fromEmail:"Gönderen E-posta",fromName:"Gönderen Adı",testConnection:"SMTP Bağlantısını Test Et",testRecipient:"Test Alıcı E-postası",sendTest:"Test E-postası Gönder",sending:"Gönderiliyor...",save:"Ayarları Kaydet",saving:"Kaydediliyor...",advancedAuth:"Gelişmiş Kimlik Doğrulama",advancedAuthEnabled:"Gelişmiş Kimlik Doğrulama etkin",advancedAuthEnabledDesc:"E-posta tabanlı kullanıcı yönetimi özellikleri aktif. Yeni kullanıcılar e-posta ile otomatik oluşturulan parolalar alacak ve kullanıcılar parola sıfırlama özelliğiyle parolalarını sıfırlayabilecek.",advancedAuthDisabled:"Gelişmiş Kimlik Doğrulama devre dışı",advancedAuthDisabledDesc:"Kullanıcı yönetimi için e-posta tabanlı özellikleri etkinleştirmek için gelişmiş kimlik doğrulamayı etkinleştirin.",enable:"Etkinleştir",disable:"Devre dışı bırak",feature1:"Parolalar otomatik oluşturulur ve yeni kullanıcılara e-posta ile gönderilir",feature2:"Kullanıcılar kullanıcı adı veya e-posta ile giriş yapabilir",feature3:"Parola unuttum özelliği kullanılabilir",feature4:"Yöneticiler kullanıcı parolalarını e-posta ile sıfırlayabilir",errors:{requiredFields:"Lütfen tüm zorunlu alanları doldurun",usernameRequired:"Kimlik doğrulama etkinken kullanıcı adı zorunludur",enterTestEmail:"Lütfen test e-posta adresi girin",smtpServerAndEmail:"Test etmeden önce lütfen SMTP Sunucusu ve Gönderen E-posta alanlarını doldurun",usernamePasswordRequired:"Kimlik doğrulama etkinken Kullanıcı Adı ve Parola zorunludur",configureSmtpFirst:"Lütfen önce SMTP ayarlarını yapılandırın ve test edin",enableAuthFirst:"E-posta tabanlı özellikleri kullanmak için lütfen önce kimlik doğrulamayı etkinleştirin."},success:{settingsSaved:"SMTP ayarları başarıyla kaydedildi"},securityOptions:{starttls:"STARTTLS (Port 587)",ssl:"SSL/TLS (Port 465)",none:"Hiçbiri (Port 25)"},authOptions:{enabled:"Etkin",disabled:"Devre dışı"}},appearance:"Görünüm",notifications:"Bildirimler",smartPlugs:"Akıllı Prizler",spoolman:"Spoolman",updates:"Güncellemeler",language:"Dil",languageDescription:"Tercih ettiğiniz dili seçin",theme:"Tema",themeLight:"Açık",themeDark:"Koyu",themeSystem:"Sistem",defaultView:"Varsayılan Görünüm",defaultViewDescription:"Uygulamayı açarken gösterilecek sayfa",checkForUpdates:"Güncellemeleri Kontrol Et",autoUpdate:"Otomatik Güncelleme",currentVersion:"Mevcut Sürüm",latestVersion:"En Son Sürüm",upToDate:"Güncelsiniz",updateAvailable:"Güncelleme mevcut",notificationLanguage:"Bildirim Dili",notificationLanguageDescription:"Push bildirimleri için dil",bedCooledThreshold:"Tabla Soğuma Eşiği",bedCooledThresholdDescription:"Bir baskıdan sonra tablanın soğumuş kabul edildiği sıcaklık",userNotificationsEnabled:"Kullanıcı Bildirimleri",userNotificationsEnabledDescription:"Baskı işi olayları için kullanıcı bildirim menüsünü ve e-posta bildirimlerini etkinleştir. Gelişmiş Kimlik Doğrulama gerektirir.",userNotificationsDisabledHint:"Kullanıcı bildirimlerini kullanmak için Gelişmiş Kimlik Doğrulamayı etkinleştirin.",notificationProviders:"Bildirim Sağlayıcıları",addProvider:"Sağlayıcı Ekle",editProvider:"Sağlayıcıyı Düzenle",providerType:"Sağlayıcı Türü",testNotification:"Test Bildirimi",testSuccess:"Test bildirimi başarıyla gönderildi",testFailed:"Test bildirimi gönderilemedi",quietHours:"Sessiz Saatler",quietHoursDescription:"Bu saatler arasında rahatsız etme",quietHoursStart:"Başlangıç",quietHoursEnd:"Bitiş",events:{title:"Bildirim Olayları",printStart:"Baskı Başladı",printComplete:"Baskı Tamamlandı",printFailed:"Baskı Başarısız",printStopped:"Baskı Durduruldu",printProgress:"İlerleme Kilometre Taşları",printProgressDescription:"%25, %50, %75'te bildir",printerOffline:"Yazıcı Çevrimdışı",printerError:"Yazıcı Hatası",filamentLow:"Az Filament",maintenanceDue:"Bakım Zamanı",maintenanceDueDescription:"Bakım gerektiğinde bildir"},smartPlug:{title:"Akıllı Prizler",add:"Akıllı Priz Ekle",edit:"Akıllı Prizi Düzenle",name:"Ad",ipAddress:"IP Adresi",linkedPrinter:"Bağlı Yazıcı",autoOn:"Otomatik Aç",autoOnDescription:"Baskı başladığında aç",autoOff:"Otomatik Kapat",autoOffDescription:"Baskı tamamlandıktan sonra kapat",offDelay:"Kapatma Gecikmesi",offDelayMinutes:"Baskıdan sonra dakika",offDelayTemp:"Nozul sıcaklığın altında olduğunda",currentState:"Mevcut Durum",turnOn:"Aç",turnOff:"Kapat"},filamentTracking:"Filament Takibi",filamentTrackingDesc:"Filament makaralarınızı nasıl takip edeceğinizi seçin. Yerleşik envanteri kullanabilir veya harici bir Spoolman sunucusuna bağlanabilirsiniz.",filamentChecks:"Filament kontrolleri",disableFilamentWarnings:"Filament uyarılarını devre dışı bırak",disableFilamentWarningsDesc:"Yazdırırken veya kuyruğa eklerken yetersiz filamentle ilgili uyarıları gösterme",preferLowestFilament:"En az kalan filamenti tercih et",preferLowestFilamentDesc:"Birden fazla makara eşleştiğinde, kalan filamenti en az olanı kullan",trackingModeBuiltIn:"Yerleşik Envanter",trackingModeBuiltInDesc:"RFID otomatik eşleştirme ve kullanım takibi dahil",trackingModeSpoolmanDesc:"Harici filament yönetim sunucusu",builtInFeatureRfid:"AMS'deki Bambu Lab RFID makaralarını otomatik olarak algılar",builtInFeatureUsage:"Baskı başına filament tüketimini takip eder",builtInFeatureCatalog:"Makaraları, renkleri ve K faktör profillerini yönetin",builtInFeatureThirdParty:"Üçüncü taraf makaralar envanter makaralarına atanabilir",amsSyncButton:"AMS'den Ağırlıkları Senkronize Et",amsSyncTitle:"AMS'den Makara Ağırlıklarını Senkronize Et",amsSyncMessage:"Bu, bağlı yazıcılardan gelen mevcut AMS kalan% değerleriyle tüm envanter makara ağırlıklarının üzerine yazar. Bozuk ağırlık verilerinden kurtarmak için bunu kullanın. Yazıcılar çevrimiçi olmalıdır.",amsSyncing:"Senkronize ediliyor...",amsSyncSuccess:"{{synced}} makara senkronize edildi, {{skipped}} atlandı",amsSyncError:"AMS'den ağırlıklar senkronize edilemedi",spoolmanAmsSyncButton:"AMS'den Spoolman Ağırlıklarını Senkronize Et",spoolmanAmsSyncTitle:"AMS'den Spoolman Makara Ağırlıklarını Senkronize Et",spoolmanAmsSyncMessage:"Bu, bağlı yazıcılardan gelen mevcut AMS kalan% değerlerine göre tüm Spoolman makara ağırlıklarını güncelleyecek. Yazıcılar çevrimiçi olmalıdır.",spoolmanAmsSyncing:"Senkronize ediliyor...",spoolmanAmsSyncSuccess:"{{synced}} makara senkronize edildi, {{skipped}} atlandı",spoolmanAmsSyncError:"Spoolman ağırlıkları AMS'den senkronize edilemedi",spoolmanAmsSyncErrorUnreachable:"Spoolman ağırlıkları senkronize edilemedi (Spoolman erişilemez)",spoolmanAmsSyncErrorNotConfigured:"Spoolman ağırlıkları senkronize edilemedi (Spoolman yapılandırılmamış)",spoolmanNotConfigured:"Spoolman yapılandırılmamış",spoolmanFilamentCatalogTitle:"Spoolman Filament Kataloğu",spoolmanFilamentCatalogDesc:"Spoolman örneğinizden filament adları ve boş ağırlıkları. Ad ve makara ağırlığı burada düzenlenebilir; diğer tüm özellikler doğrudan Spoolman'da yönetilir.",spoolmanUrl:"Spoolman URL",spoolmanUrlHint:"Spoolman sunucunuzun URL'si (örn., http://localhost:7912)",spoolmanConnected:"Bağlı",spoolmanDisconnected:"Bağlı değil",status:"Durum",connect:"Bağlan",disconnect:"Bağlantıyı Kes",howSyncWorks:"Senkronizasyon Nasıl Çalışır",syncInfoRfidOnly:"Yalnızca RFID'li resmi Bambu Lab makaraları senkronize edilir",syncInfoAutoCreate:"Yeni makaralar ilk senkronizasyonda Spoolman'da otomatik olarak oluşturulur",syncInfoThirdPartySkipped:"Bambu Lab dışı makaralar (üçüncü taraf, yeniden doldurulmuş) atlanır",linkingExistingSpools:"Mevcut Makaraları Bağlama",linkingExistingSpoolsDesc:`Mevcut Spoolman makaralarını AMS'inize bağlamak için, bir AMS yuvasının üzerine gelin ve "Spoolman'a Bağla"ya tıklayın.`,syncMode:"Senkronizasyon Modu",syncModeAuto:"Otomatik",syncModeManual:"Yalnızca Manuel",syncModeAutoDesc:"Değişiklikler algılandığında AMS verisi otomatik olarak senkronize edilir",syncModeManualDesc:"Yalnızca manuel olarak tetiklendiğinde senkronize et",syncAmsData:"AMS Verisini Senkronize Et",syncAmsDataDesc:"Yazıcı AMS verisini manuel olarak Spoolman'a senkronize et",allPrinters:"Tüm Yazıcılar",noDefaultPrinter:"Varsayılan yok (her seferinde sor)",sidebarOrder:"Kenar çubuğu sırası",saveThumbnails:"Küçük resimleri kaydet",captureFinishPhoto:"Bitiş fotoğrafı çek",noPrintersConfigured:"Yapılandırılmış yazıcı yok",archiveMode:{always:"Her zaman arşiv girişi oluştur",never:"Asla arşiv girişi oluşturma",ask:"Her seferinde sor"},checkForUpdatesLabel:"Güncellemeleri kontrol et",checkPrinterFirmware:"Yazıcı firmware'ini kontrol et",includeBetaUpdates:"Beta sürümleri dahil et",includeBetaUpdatesDesc:"Güncellemeleri kontrol ederken beta ve önyayım sürümleri hakkında bildir",enableRetry:"Yeniden denemeyi etkinleştir",homeAssistantDescription:"Akıllı prizleri Home Assistant üzerinden kontrol et",environmentManagedLabel:"(Ortam Yönetiliyor)",autoEnabledViaEnv:"Ortam değişkenleriyle otomatik etkinleştirildi",urlFromEnvReadOnly:"Değer HA_URL ortam değişkeniyle ayarlandı (salt okunur)",tokenFromEnvReadOnly:"Değer HA_TOKEN ortam değişkeniyle ayarlandı (salt okunur)",mqttConnectedTo:"Bağlı",prometheusDescription:"Yazıcı verisini Prometheus formatında sun",noSmartPlugsTitle:"Yapılandırılmış akıllı priz yok",noSmartPlugsDescription:"Enerji kullanımını takip etmek ve güç kontrolünü otomatikleştirmek için Tasmota tabanlı bir akıllı priz ekleyin.",noProvidersTitle:"Yapılandırılmış sağlayıcı yok",noProvidersDescription:"Uyarı almak için bir sağlayıcı ekleyin.",noTemplatesAvailable:"Şablon mevcut değil. Varsayılan şablonları yüklemek için arka ucu yeniden başlatın.",apiPermissionView:"Yazıcı durumunu ve kuyruğu görüntüle",apiPermissionEdit:"Baskı kuyruğundan öğe ekle ve kaldır",apiKeysEmptyTitle:"API anahtarı yok",apiKeysEmptyDescription:"Harici servislerle entegre olmak için bir API anahtarı oluşturun.",noUsersFound:"Kullanıcı bulunamadı",noGroupsFound:"Grup bulunamadı",noGroupsAvailable:"Kullanılabilir grup yok",passwordsDoNotMatch:"Parolalar eşleşmiyor",systemGroupWarning:"Sistem grubu adları değiştirilemez",authDisabledTitle:"Kimlik Doğrulama Devre Dışı",authDisabledFeature1:"Sisteme erişmek için giriş gerektir",authDisabledFeature2:"Grup tabanlı izinlerle birden fazla kullanıcı oluştur",authDisabledFeature3:"50'den fazla ayrıntılı izinle erişimi kontrol et",userHasCreated:"Bu kullanıcı şunları oluşturdu:",userItemsQuestion:"Bu öğelerle ne yapmak istersiniz?",deleteUserConfirm:"Bu kullanıcıyı silmek istediğinizden emin misiniz?",actionCannotBeUndone:"Bu işlem geri alınamaz.",addFirstSmartPlug:"İlk Akıllı Prizinizi Ekleyin",providers:"Sağlayıcılar",log:"Günlük",testAll:"Hepsini Test Et",testResults:"Test Sonuçları",testPassedCount:"{{count}} başarılı",testFailedCount:"{{count}} başarısız",messageTemplates:"Mesaj Şablonları",messageTemplatesDescription:"Her olay için bildirim mesajlarını özelleştirin.",apiKeys:"API Anahtarları",apiKeysDescription:"Harici entegrasyonlar ve webhook'lar için API anahtarları oluşturun.",createKey:"Anahtar Oluştur",apiKeyCreated:"API Anahtarı Başarıyla Oluşturuldu",apiKeyCopyWarning:"Bu anahtarı şimdi kopyalayın - bir daha gösterilmeyecek!",useInApiBrowser:"API Tarayıcısında Kullan",createNewApiKey:"Yeni API Anahtarı Oluştur",keyName:"Anahtar Adı",keyNamePlaceholder:"örn., Home Assistant, OctoPrint",readStatus:"Durumu Oku",readStatusDescription:"Yazıcı durumunu ve kuyruğu görüntüle",manageQueue:"Kuyruğu Yönet",manageQueueDescription:"Baskı kuyruğundan öğe ekle ve kaldır",controlPrinter:"Yazıcıyı Kontrol Et",controlPrinterDescription:"Baskıları duraklat, devam ettir ve durdur",manageLibrary:"Kütüphaneyi Yönet",manageLibraryDescription:"Kütüphane dosyalarını yükle, yeniden adlandır ve sil; MakerWorld'den model içe aktar",manageInventory:"Envanteri Yönet",manageInventoryDescription:"Makaraları ve envanter kayıtlarını oluştur, güncelle ve sil. SpoolBuddy kiosklar (NFC tarama, tartı okumaları, kiosk sistem komutları) için gereklidir.",libraryBadge:"Kütüphane",inventoryBadge:"Envanter",cloudAccess:"Bulut erişimine izin ver",cloudAccessDescription:"Adınıza Bambu Bulut ön ayarlarını ve filamentleri okuyun. Bambu Bulut'a giriş yapmış olmanız gerekir.",cloudBadge:"Bulut",updateEnergyCost:"Elektrik fiyatını güncelle",updateEnergyCostDescription:"Bu anahtarın /settings/electricity-price üzerine yeni bir kWh başına elektrik fiyatı POST etmesine izin ver. Home Assistant dinamik tarife otomasyonları (Tibber, Octopus, vb.) için kullanışlıdır. Bu, API anahtarıyla yazılabilen tek ayar alanıdır.",energyCostBadge:"Enerji",legacyKey:"Eski",legacyKeyTooltip:"Kullanıcı başına sahiplikten önce oluşturuldu; bulut erişimini kullanmak için yeniden oluşturun",unnamedKey:"Adsız Anahtar",lastUsed:"Son kullanım",read:"Oku",control:"Kontrol",createFirstKey:"İlk Anahtarınızı Oluşturun",webhookEndpoints:"Webhook Uç Noktaları",webhookApiKeyHint:"API anahtarınızı X-API-Key başlığında kullanın.",webhook:{getAllStatus:"Tüm yazıcı durumlarını al",getSpecificStatus:"Belirli yazıcı durumunu al",addToQueue:"Baskı kuyruğuna ekle",pausePrint:"Baskıyı duraklat",resumePrint:"Baskıya devam et",stopPrint:"Baskıyı durdur"},apiBrowser:"API Tarayıcısı",apiBrowserDescription:"Mevcut tüm API uç noktalarını keşfedin ve test edin.",apiKeyForTesting:"Test için API Anahtarı",apiKeyPlaceholder:"Kimlik doğrulamalı uç noktaları test etmek için API anahtarınızı buraya yapıştırın...",apiKeyHint:"Bu anahtar isteklerle birlikte X-API-Key başlığı olarak gönderilecek.",deleteApiKeyTitle:"API Anahtarını Sil",deleteApiKeyMessage:"Bu API anahtarını silmek istediğinizden emin misiniz? Bu anahtarı kullanan tüm entegrasyonlar çalışmayı durduracak.",deleteKey:"Anahtarı Sil",amsDisplayThresholds:"AMS Görüntü Eşikleri",amsThresholdsDescription:"AMS nem ve sıcaklık göstergeleri için renk eşiklerini yapılandırın.",humidity:"Nem",goodGreen:"İyi (yeşil)",fairOrange:"Orta (turuncu)",aboveFairBad:"Orta eşiğin üstü kırmızı olarak gösterilir (kötü)",fairAlsoDryingThreshold:"Bu eşik aynı zamanda etkinleştirildiğinde otomatik kurutmayı tetiklemek için de kullanılır",temperature:"Sıcaklık",goodBlue:"İyi (mavi)",aboveFairHot:"Orta eşiğin üstü kırmızı olarak gösterilir (sıcak)",historyRetention:"Geçmiş Saklama",keepSensorHistory:"Sensör geçmişini sakla",historyRetentionDescription:"Daha eski nem ve sıcaklık verileri otomatik olarak silinecek",defaultPrintOptions:"Varsayılan Baskı Seçenekleri",defaultPrintOptionsDescription:"Yeni baskılar başlatılırken baskı seçenekleri için varsayılan değerleri ayarlayın. Bunlar baskı iletişim kutusunda baskı başına geçersiz kılınabilir.",defaultBedLevelling:"Tabla Seviyelendirme",defaultBedLevellingDesc:"Baskıdan önce tablayı otomatik seviyelendir",defaultFlowCali:"Akış Kalibrasyonu",defaultFlowCaliDesc:"Ekstrüzyon akışını kalibre et",defaultVibrationCali:"Titreşim Kalibrasyonu",defaultVibrationCaliDesc:"Çınlama artefaktlarını azalt",defaultLayerInspect:"İlk Katman Denetimi",defaultLayerInspectDesc:"İlk katmanın AI denetimi",defaultTimelapse:"Zaman Atlamalı Video",defaultTimelapseDesc:"Zaman atlamalı video kaydet",staggeredStart:"Kademeli Başlatma",staggeredStartDescription:"Çoklu yazıcı toplu başlatmaları kademelendirilirken varsayılan grup boyutu ve aralığı. Baskı modalinde yığın başına geçersiz kılınabilir.",plateClear:"Plaka Temizleme Onayı",requirePlateClear:"Plaka temizleme onayı gerektir",requirePlateClearDescription:'Etkinleştirildiğinde, planlayıcı bitmiş işleri olan yazıcılarda kuyruktaki baskıları başlatmadan önce yazıcı başına plaka temizleme onayını bekler. Bunu devre dışı bırakmak ayrıca plaka durum rozetini ve yazıcı kartlarındaki "Plakayı temizlendi olarak işaretle" düğmesini gizler.',gcodeInjection:"G-kod Enjeksiyonu",gcodeInjectionDescription:'Farmloop, SwapMod, AutoClear ve Printflow 3D gibi otomatik baskı sistemleri için baskıların başlangıcında ve/veya sonunda enjekte edilecek özel G-kodu yapılandırın. Parçacıklar yazıcı modeli başına yapılandırılır ve bir kuyruk öğesinde "G-kod Enjekte Et" etkinleştirildiğinde uygulanır.',gcodeInjectionNoPrinters:"Yazıcı bulunamadı. G-kod parçacıklarını yapılandırmak için yazıcı ekleyin.",gcodeStartLabel:"Başlangıç G-kodu",gcodeEndLabel:"Bitiş G-kodu",gcodeStartPlaceholder:"Baskı başlamadan önce eklenecek G-kodu...",gcodeEndPlaceholder:"Baskı bittikten sonra eklenecek G-kodu...",staggerGroupSize:"Grup boyutu",staggerGroupSizeHelp:"Grup başına eş zamanlı başlatılacak yazıcılar",staggerInterval:"Aralık (dakika)",staggerIntervalHelp:"Her grubun başlatılması arasındaki gecikme",queueDrying:"Kuyruk Otomatik Kurutma",queueDryingDescription:"Kuyruktaki baskılar arasında yazıcı boştayken AMS filamentini otomatik olarak kurut. Kurutmayı tetiklemek için yukarıdaki nem eşiğini kullanır.",queueDryingEnabled:"Otomatik kurutmayı etkinleştir",queueDryingEnabledDescription:"Yazıcı boştayken ve nem eşiğin üzerindeyken AMS kurutmasını otomatik olarak başlat",queueDryingBlock:"Kurutmanın tamamlanmasını bekle",queueDryingBlockDescription:"Kurutma bitene kadar baskı kuyruğunu engelle. Kapalıyken, baskılar kurutmadan önceliklidir.",ambientDryingEnabled:"Ortam kurutma",ambientDryingEnabledDescription:"Kuyrukta baskı olmasa bile, nem eşiği aştığında boşta yazıcılarda filamenti otomatik olarak kurut.",dryingPresets:"Kurutma Ön Ayarları",dryingPresetsDescription:"Filament türü başına sıcaklık ve süre. AMS 2 Pro daha düşük sıcaklıklar kullanır, AMS-HT daha yüksek sıcaklıkları destekler.",dryingFilament:"Filament",printModal:"Baskı Modali",expandCustomMapping:"Özel eşlemeyi varsayılan olarak genişlet",expandCustomMappingDescription:"Birden fazla yazıcıya yazdırırken, yazıcı başına AMS eşlemesini genişletilmiş olarak göster",authentication:"Kimlik Doğrulama",authEnabledDescription:"Örneğiniz kullanıcı kimlik doğrulamayla güvende",authDisabledDescription:"Girişi gerektirmek ve kullanıcı erişimini yönetmek için etkinleştir",authDisabledMessage:"Kullanıcı hesapları oluşturmak, izinleri yönetmek ve Bambuddy örneğinizi güvende tutmak için kimlik doğrulamayı etkinleştirin.",enableAuthentication:"Kimlik Doğrulamayı Etkinleştir",currentUser:"Mevcut Kullanıcı",changePassword:"Parolayı Değiştir",admin:"Yönetici",users:"Kullanıcılar",addUser:"Kullanıcı Ekle",groups:"Gruplar",addGroup:"Grup Ekle",system:"Sistem",noDescription:"Açıklama yok",userCount:"{{count}} kullanıcı",permissionCount:"{{count}} izin",createUser:"Kullanıcı Oluştur",username:"Kullanıcı Adı",enterUsername:"Kullanıcı adı girin",password:"Parola",enterPassword:"Parola girin",passwordRequirements:"En az 8 karakter, bir büyük harf, bir küçük harf, bir rakam ve bir özel karakter ile.",confirmPassword:"Parolayı Onayla",confirmPasswordPlaceholder:"Parolayı onayla",viewReleaseOnGitHub:"Yayını GitHub'da görüntüle",turnAllPlugsOn:"Tüm prizleri aç",turnAllPlugsOff:"Tüm prizleri kapat",clearNotificationLogs:"Bildirim Günlüklerini Temizle",clearLogsMessage:"Bu, 30 günden eski tüm bildirim günlüklerini kalıcı olarak silecek. Bu işlem geri alınamaz.",clearLogs:"Günlükleri Temizle",resetUiPreferences:"Arayüz Tercihlerini Sıfırla",resetUiPreferencesMessage:"Bu, tüm arayüz tercihlerini varsayılana sıfırlayacak: kenar çubuğu sırası, tema, gösterge paneli düzeni, görünüm modları ve sıralama tercihleri. Yazıcılarınız, arşivleriniz ve sunucu ayarlarınız ETKİLENMEYECEK. Sayfa temizleme sonrası yeniden yüklenecek.",resetPreferences:"Tercihleri Sıfırla",deleteGroupTitle:"Grubu Sil",deleteGroupMessage:"Bu grubu silmek istediğinizden emin misiniz? Bu gruptaki kullanıcılar bu izinleri kaybedecek.",deleteGroup:"Grubu Sil",disableAuthenticationTitle:"Kimlik Doğrulamayı Devre Dışı Bırak",disableAuthenticationMessage:"Kimlik doğrulamayı devre dışı bırakmak istediğinizden emin misiniz? Bu, Bambuddy örneğinizi giriş yapmadan erişilebilir hale getirecek. Tüm kullanıcılar veritabanında kalacak ancak kimlik doğrulama devre dışı bırakılacak.",disableAuthentication:"Kimlik Doğrulamayı Devre Dışı Bırak",configureBambuddy:"Bambuddy'yi Yapılandır",systemDefault:"Sistem Varsayılanı",archiveSettings:"Arşiv Ayarları",newWindow:"Yeni Pencere",embeddedOverlay:"Gömülü Bindirme",preferredSlicer:"Tercih Edilen Dilimleyici",preferredSlicerDescription:"Dosyaları açmak için hangi dilimleyici uygulamasının kullanılacağını seçin",orcaslicerKnownIssuesWarning:"OrcaSlicer 2.3.2 / 2.4.0-dev, birçok Bambu yazılı 3MF'nin dilimlenmesini engelleyen bilinen CLI hatalarına sahiptir — yukarı yöndeki #12426 (boyalı çok ekstrüderli dosyalarda segfault) ve #13386 (parametre aralığı katı doğrulama reddi) sorunlarına bakın. Yukarı yön düzeltmeler gelene kadar Bambu Studio önerilir.",useSlicerApi:"Dilimleyici API kullan",useSlicerApiDescription:'Açıkken, "Dilimle" eylemleri uygulama içi dilimleyici modalini açar ve dilimleyici-API yardımcı bileşenini çağırır. Kapalıyken (varsayılan), URI şeması üzerinden masaüstü dilimleyiciye devredilirler.',slicerCard:"Dilimleyici",orcaslicerApiUrl:"OrcaSlicer yardımcı bileşen URL",bambuStudioApiUrl:"Bambu Studio yardımcı bileşen URL",slicerApiUrlDescription:"Dilimleyici-API yardımcı bileşen konteynerinin URL'si. SLICER_API_URL / BAMBU_STUDIO_API_URL ortam değişkeni varsayılanlarını kullanmak için boş bırakın.",slicerBundles:{title:"Dilimleyici Paketleri",description:`BambuStudio'dan dışa aktarılmış (Dosya → Dışa Aktar → Ön Ayar Paketini Dışa Aktar → "Yazıcı ön ayar paketi") bir Yazıcı Ön Ayar Paketi (.bbscfg) içe aktarın. İçe aktarıldıktan sonra dilimleme istekleri, JSON profil üçlüsünü yeniden yüklemeden paketten ön ayarları ada göre seçebilir.`,uploadButton:"Paket yükle",uploading:"Yükleniyor…",loading:"Paketler yükleniyor…",empty:"Henüz içe aktarılmış paket yok.",summary:"{{processCount}} işlem · {{filamentCount}} filament ön ayarı",delete:"Sil",uploadSuccess:"{{name}} içe aktarıldı",uploadError:"Paket yüklemesi başarısız: {{message}}",deleteSuccess:"Paket kaldırıldı",deleteError:"Paket silme başarısız: {{message}}",confirmDeleteTitle:"Bu paket kaldırılsın mı?",confirmDeleteMessage:'Paket yeniden içe aktarılana kadar "{{name}}" referans alan dilimleme istekleri başarısız olacak.'},externalCameras:"Harici Kameralar",costTracking:"Maliyet Takibi",printsOnly:"Yalnızca Baskılar",totalConsumption:"Toplam Tüketim",dataManagement:"Veri Yönetimi",storageUsage:"Depolama Kullanımı",storageUsageDescription:"Kategoriye göre veri kullanımı dökümü",storageUsageTotal:"Toplam",storageUsageErrors:"Hatalar",storageUsageOtherBreakdown:"Diğer (statik varlıklar, betikler ve yapılandırma dosyaları dahil)",storageUsageSystem:"Sistem",storageUsageData:"Veri",storageUsageUnavailable:"Depolama kullanım bilgisi mevcut değil",clearNotificationLogsDescription:"30 günden eski bildirim günlüklerini sil",resetUiPreferencesDescription:"Kenar çubuğu sırası, tema, görünüm modları ve düzen tercihlerini sıfırla. Yazıcılar, arşivler ve ayarlar etkilenmez.",enableHomeAssistant:"Home Assistant'ı Etkinleştir",enableMqtt:"MQTT'yi Etkinleştir",useTls:"TLS Kullan",enableMetricsEndpoint:"Metrikler Uç Noktasını Etkinleştir",availableMetrics:"Kullanılabilir Metrikler",editUser:"Kullanıcıyı Düzenle",deleteUserTitle:"Kullanıcıyı Sil",groupName:"Grup Adı",leaveEmptyForAnonymous:"Anonim için boş bırakın",leaveEmptyForNoAuth:"Kimlik doğrulama olmaması için boş bırakın",enterNewPassword:"Yeni parola girin",confirmNewPassword:"Yeni parolayı onayla",enterGroupName:"Grup adını girin",enterDescriptionOptional:"Açıklama girin (isteğe bağlı)",enterCurrentPassword:"Mevcut parolayı girin",enterNewPasswordMin6:"Yeni parolayı girin (en az 6 karakter)",toast:{keyCopied:"Anahtar panoya kopyalandı",copyFailed:"Anahtar kopyalanamadı",keyAddedToBrowser:"Anahtar API Tarayıcısına eklendi",clearLogsFailed:"Günlükler temizlenemedi",uiPreferencesReset:"Arayüz tercihleri sıfırlandı. Yenileniyor...",authDisabled:"Kimlik doğrulama başarıyla devre dışı bırakıldı",authDisableFailed:"Kimlik doğrulama devre dışı bırakılamadı",apiKeyCreated:"API anahtarı oluşturuldu",apiKeyDeleted:"API anahtarı silindi",userCreated:"Kullanıcı başarıyla oluşturuldu",userUpdated:"Kullanıcı başarıyla güncellendi",userDeleted:"Kullanıcı başarıyla silindi",groupCreated:"Grup başarıyla oluşturuldu",groupUpdated:"Grup başarıyla güncellendi",groupDeleted:"Grup başarıyla silindi",fillRequiredFields:"Lütfen tüm zorunlu alanları doldurun",passwordsDoNotMatch:"Parolalar eşleşmiyor",passwordTooShort:"Parola en az 8 karakter olmalı",passwordNeedsUppercase:"Parola en az bir büyük harf içermeli",passwordNeedsLowercase:"Parola en az bir küçük harf içermeli",passwordNeedsDigit:"Parola en az bir rakam içermeli",passwordNeedsSpecial:"Parola en az bir özel karakter içermeli",enterGroupName:"Lütfen bir grup adı girin",settingsSaved:"Ayarlar kaydedildi",noPermissionUpdate:"Ayarları değiştirme izniniz yok",cameraSettingsSaved:"Kamera ayarları kaydedildi",enterCameraUrl:"Lütfen bir kamera URL'si girin",passwordChanged:"Parola başarıyla değiştirildi",connectionFailed:"Bağlantı başarısız",testFailed:"Test başarısız",cameraConnected:"Kamera bağlandı{{resolution}}"},testConnection:"Bağlantıyı Test Et",catalog:{spoolCatalog:"Makara Kataloğu",spoolCatalogDescription:"Marka/türe göre boş makara ağırlıkları. Makara eklerken otomatik ağırlık araması için kullanılır.",searchCatalog:"Katalogda ara...",addNewEntry:"Yeni Giriş Ekle",namePlaceholder:"Ad (örn., Bambu Lab - Plastik)",weight:"Ağırlık",type:"Tür",default:"Varsayılan",custom:"Özel",noMatch:"Aramanızla eşleşen giriş yok",empty:"Katalogda giriş yok",deleteEntry:"Girişi Sil",deleteConfirm:'"{{name}}" silmek istediğinizden emin misiniz?',resetCatalog:"Kataloğu Sıfırla",resetConfirm:"Katalog varsayılana sıfırlansın mı? Bu, tüm özel girişleri kaldıracak.",loadFailed:"Makara kataloğu yüklenemedi",nameWeightRequired:"Ad ve ağırlık gereklidir",entryAdded:"Giriş eklendi",addFailed:"Giriş eklenemedi",entryUpdated:"Giriş güncellendi",updateFailed:"Giriş güncellenemedi",entryDeleted:"Giriş silindi",deleteFailed:"Giriş silinemedi",resetSuccess:"Katalog varsayılana sıfırlandı",resetFailed:"Katalog sıfırlanamadı",exported:"{{count}} giriş dışa aktarıldı",imported:"{{added}} giriş içe aktarıldı ({{skipped}} atlandı)",importFailed:"İçe aktarma başarısız: geçersiz JSON formatı",exportTooltip:"Kataloğu JSON'a dışa aktar",importTooltip:"Kataloğu JSON'dan içe aktar",resetTooltip:"Varsayılana sıfırla",selectedCount:"{{count}} seçildi",deleteSelected:"Seçilenleri Sil",bulkDeleteConfirm:"{{count}} girişi silmek istediğinizden emin misiniz?",bulkDeleted:"{{count}} giriş silindi",bulkDeleteFailed:"Girişler silinemedi",material:"Malzeme",spoolWeight:"Makara Ağırlığı",color:"Renk",updateSpoolWeight:"Makara Ağırlığını Güncelle",filamentUpdated:"Filament güncellendi",filamentUpdateFailed:"Filament güncellenemedi",filamentUpdateInvalid:"Geçersiz filament verisi",keepExistingSpoolWeight:"Mevcut makaralar için eski ağırlığı koru",keepExistingSpoolWeightDesc:"Bu filament türüyle önceden oluşturulmuş makaralar eski boş ağırlığı korur. Yeni makaralar güncellenmiş değeri kullanır.",applyToAllSpools:"Tüm makaralara uygula",applyToAllSpoolsDesc:"Bu filament türü için tüm ağırlık hesaplamaları hemen yeni boş ağırlığı kullanır."},colorCatalog:{title:"Renk Kataloğu",description:"Üreticiye/malzemeye göre filament renkleri. Makara eklerken otomatik renk araması için kullanılır.",searchColors:"Renklerde ara...",allManufacturers:"Tüm üreticiler",addNewColor:"Yeni Renk Ekle",manufacturer:"Üretici",colorName:"Renk Adı",hex:"Hex",materialOptional:"Malzeme (isteğe bağlı)",showing:"{{total}} renkten {{filtered}} tanesi gösteriliyor",noMatch:"Aramanızla eşleşen renk yok",empty:"Katalogda renk yok",deleteColor:"Rengi Sil",deleteConfirm:'"{{name}}" silmek istediğinizden emin misiniz?',resetCatalog:"Renk Kataloğunu Sıfırla",resetConfirm:"Katalog varsayılana sıfırlansın mı? Bu, tüm özel renkleri kaldıracak.",sync:"Senkronize Et",starting:"Başlatılıyor...",syncTooltip:"FilamentColors.xyz'den senkronize et (2000+ renk, bir dakika sürebilir)",loadFailed:"Renk kataloğu yüklenemedi",fieldsRequired:"Üretici, renk adı ve hex renk gereklidir",colorAdded:"Renk eklendi",addFailed:"Renk eklenemedi",colorUpdated:"Renk güncellendi",updateFailed:"Renk güncellenemedi",colorDeleted:"Renk silindi",deleteFailed:"Renk silinemedi",resetSuccess:"Renk kataloğu varsayılana sıfırlandı",resetFailed:"Katalog sıfırlanamadı",syncUpToDate:"Zaten güncel ({{count}} renk kontrol edildi)",syncComplete:"{{added}} yeni renk eklendi ({{skipped}} zaten mevcuttu)",syncError:"Senkronizasyon hatası",syncFailed:"FilamentColors.xyz'den senkronize edilemedi",exported:"{{count}} renk dışa aktarıldı",imported:"{{added}} renk içe aktarıldı ({{skipped}} atlandı)",importFailed:"İçe aktarma başarısız: geçersiz JSON formatı",selectedCount:"{{count}} seçildi",deleteSelected:"Seçilenleri Sil",bulkDeleteConfirm:"{{count}} rengi silmek istediğinizden emin misiniz?",bulkDeleted:"{{count}} renk silindi",bulkDeleteFailed:"Renkler silinemedi"},dateFormat:"Tarih Formatı",dateFormatUs:"ABD (AA/GG/YYYY)",dateFormatEu:"AB (GG/AA/YYYY)",dateFormatIso:"ISO (YYYY-AA-GG)",timeFormat:"Saat Formatı",timeFormat12:"12 saat (3:30 PM)",timeFormat24:"24 saat (15:30)",defaultPrinter:"Varsayılan Yazıcı",defaultPrinterDescription:"Yüklemeler, tekrar baskılar ve diğer işlemler için bu yazıcıyı önceden seç.",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"Yeniden sıralamak için kenar çubuğundaki öğeleri sürükleyin. Varsayılan sıraya buradan sıfırlayın.",setDefault:"Varsayılan Yap",sidebarOrderSetDefaultHint:"Varsayılan ayarla, mevcut menü sırasını henüz özelleştirmemiş kullanıcılara uygular.",sidebarDefaultSet:"Varsayılan menü sırası ayarlandı.",sidebarDefaultCleared:"Varsayılan menü sırası temizlendi.",sidebarDefaultFailed:"Varsayılan menü sırası ayarlanamadı.",reset:"Sıfırla",darkMode:"Koyu Mod",lightMode:"Açık Mod",active:"(aktif)",background:"Arka Plan",accent:"Vurgu",style:"Stil",bgNeutral:"Nötr",bgWarm:"Sıcak",bgCool:"Soğuk",bgOled:"OLED Siyah",bgSlate:"Arduvaz Mavisi",bgForest:"Orman Yeşili",accentGreen:"Yeşil",accentTeal:"Camgöbeği",accentBlue:"Mavi",accentOrange:"Turuncu",accentPurple:"Mor",accentRed:"Kırmızı",styleClassic:"Klasik",styleGlow:"Parıltı",styleVibrant:"Canlı",themeToggleHint:"Kenar çubuğundaki güneş/ay simgesini kullanarak koyu ve açık mod arasında geçiş yapın.",autoArchivePrints:"Baskıları otomatik arşivle",autoArchiveDescription:"Baskılar tamamlandığında 3MF dosyalarını otomatik olarak kaydet",saveThumbnailsDescription:"3MF dosyalarından önizleme görüntülerini çıkar ve kaydet",captureFinishPhotoDescription:"Baskı tamamlandığında yazıcı kamerasından bir fotoğraf çek. Bambuddy, baskı sırasında kısa bir zaman atlamalı kayıt yapar, böylece fotoğraf tabla inmeden önceki andan alınabilir. Bu baskı için zaman atlamalı kaydı etkinleştirdiyseniz dosya saklanır, aksi takdirde fotoğraf çekildikten sonra otomatik olarak silinir.",ffmpegNotInstalled:"ffmpeg yüklü değil",ffmpegRequired:"Kamera yakalama ffmpeg gerektirir. <brew>brew install ffmpeg</brew> (macOS) veya <apt>apt install ffmpeg</apt> (Linux) ile yükleyin.",camera:"Kamera",cameraViewMode:"Kamera Görüntüleme Modu",cameraOverlayDescription:"Kamera ana ekranda yeniden boyutlandırılabilir bir bindirmede açılır",cameraWindowDescription:"Kamera ayrı bir tarayıcı penceresinde açılır",externalCamerasDescription:"Yerleşik yazıcı kamerasını değiştirmek için harici kameraları yapılandırın. MJPEG akışlarını, RTSP, HTTP anlık görüntüleri ve USB kameralarını (V4L2) destekler. Etkinleştirildiğinde, harici kamera canlı görüntüleme ve bitiş fotoğrafları için kullanılır.",cameraPlaceholderUsb:"Cihaz yolu (/dev/video0)",cameraPlaceholderUrl:"Kamera URL'si (rtsp://... veya http://...)",cameraTypeMjpeg:"MJPEG Akışı",cameraTypeRtsp:"RTSP Akışı",cameraTypeSnapshot:"HTTP Anlık Görüntü",cameraTypeUsb:"USB Kamera (V4L2)",cameraSnapshotUrl:"Anlık Görüntü URL (isteğe bağlı)",cameraSnapshotUrlPlaceholder:"http://192.168.1.61:1984/api/frame.jpeg?src=printer",cameraSnapshotUrlHelp:"Bildirim küçük resimleri, bitiş fotoğrafları, katman zaman atlamalı kareler ve plaka algılama için kullanılan tek kare URL'si. Zaman atlamalı video ve plaka algılama, her birinin kendi yazıcı başına anahtarı gerektirir — bu URL yalnızca aktif olduklarında çektikleri görüntü kaynağıdır. Yukarıdaki canlı akıştan yakalamak için boş bırakın. go2rtc (/api/frame.jpeg) ve özel anlık görüntü uç noktasına sahip IP kameraları için kullanışlıdır.",cameraRotation:"Döndürme",test:"Test",connected:"Bağlı",disconnected:"Bağlı değil",currency:"Para Birimi",defaultFilamentCost:"Varsayılan filament maliyeti (kg başına)",electricityCost:"kWh başına elektrik maliyeti",energyDisplayMode:"Enerji görüntüleme modu",energyModePrintDescription:"Gösterge paneli, baskılar sırasında kullanılan enerji toplamını gösterir",energyModeTotalDescription:"Gösterge paneli, akıllı prizlerden ömür boyu enerjiyi gösterir",fileManager:"Dosya Yöneticisi",createArchiveEntry:"Yazdırırken Arşiv Girişi Oluştur",createArchiveEntryDescription:"Dosya Yöneticisinden yazdırırken isteğe bağlı olarak bir arşiv girişi oluştur",lowDiskSpaceWarning:"Düşük Disk Alanı Uyarısı",lowDiskSpaceDescription:"Boş disk alanı bu eşiğin altına düştüğünde uyarı göster",printerFirmware:"Yazıcı Firmware",checkFirmwareDescription:"Bambu Lab'dan yazıcı firmware güncellemelerini kontrol et",bambuddySoftware:"Bambuddy Yazılımı",autoCheckDescription:"Başlangıçta otomatik olarak yeni sürümleri kontrol et",checkNow:"Şimdi kontrol et",updateAvailableVersion:"Güncelleme mevcut: v{{version}}",releaseNotes:"Sürüm Notları",updateViaDocker:"Docker Compose ile güncelle:",updateViaHomeAssistant:"Güncellemeler Home Assistant Supervisor tarafından yönetilir. Yeni sürümü yüklemek için Home Assistant'ta Ayarlar → Eklentiler → Bambuddy'ye gidin.",installUpdate:"Güncellemeyi Yükle",latestVersionRunning:"En son sürümü çalıştırıyorsunuz",failedToCheckUpdates:"Güncellemeler kontrol edilemedi: {{error}}",backupRestore:"Yedekleme ve Geri Yükleme",backupRestoreDescription:"Ayarları dışa/içe aktar ve GitHub yedeklemesini yapılandır",goToBackup:"Yedeklemeye Git",externalUrl:"Harici URL",externalUrlDescription:"Bambuddy'nin erişilebildiği harici URL. Bildirim görüntüleri ve harici entegrasyonlar için kullanılır.",bambuddyUrl:"Bambuddy URL",externalUrlHint:"Protokol ve port dahil edin (örn., http://192.168.1.100:8000)",ftpRetry:"FTP Yeniden Dene",ftpRetryDescription:"Yazıcı WiFi güvenilmez olduğunda FTP işlemlerini yeniden dene. 3MF indirmelerine, baskı yüklemelerine, zaman atlamalı video indirmelerine ve firmware güncellemelerine uygulanır.",autoRetryDescription:"Başarısız FTP işlemlerini otomatik olarak yeniden dene",retryAttempts:"Yeniden deneme sayısı",retryDelay:"Yeniden deneme gecikmesi",connectionTimeout:"Bağlantı zaman aşımı",time_one:"{{count}} kez",time_other:"{{count}} kez",second_one:"{{count}} saniye",second_other:"{{count}} saniye",nSeconds:"{{count}} saniye",increaseForWeakWifi:"Zayıf WiFi'li yazıcılar için artırın",homeAssistant:"Home Assistant",homeAssistantFullDescription:"HA'nın REST API'si üzerinden akıllı prizleri kontrol etmek için Home Assistant'a bağlanın. switch, light, input_boolean ve script varlıklarını destekler.",homeAssistantUrl:"Home Assistant URL",longLivedAccessToken:"Uzun Ömürlü Erişim Belirteci",haTokenHint:"HA'da belirteç oluşturun: Profil → Uzun Ömürlü Erişim Belirteçleri → Belirteç Oluştur",connectionSuccessful:"Bağlantı Başarılı",connectionFailed:"Bağlantı Başarısız",haConnectionSuccess:"Home Assistant'a başarıyla bağlanıldı.",haConnectionFailed:"Home Assistant'a bağlanılamadı.",mqttPublishing:"MQTT Yayınlama",mqttDescription:"Node-RED, Home Assistant ve diğer otomasyon sistemleriyle entegrasyon için BamBuddy olaylarını harici bir MQTT brokerına yayınla.",mqttEnableDescription:"Olayları harici MQTT brokerına yayınla",brokerHostname:"Broker ana bilgisayar adı",port:"Port",usernameOptional:"Kullanıcı adı (isteğe bağlı)",passwordOptional:"Parola (isteğe bağlı)",topicPrefix:"Konu öneki",topicPrefixHint:"Konular: {{prefix}}/printers/<serial>/status, vb. olacak",prometheusMetrics:"Prometheus Metrikleri",prometheusEndpointDescription:"Prometheus/Grafana izleme için yazıcı metriklerini <code>/api/v1/metrics</code> adresinde sun.",bearerTokenOptional:"Bearer Belirteci (isteğe bağlı)",bearerTokenHint:"Ayarlandıysa, isteklerin <code>Authorization: Bearer <token></code> içermesi gerekir",metricsConnectionStatus:"Bağlantı durumu",metricsPrinterState:"Yazıcı durumu (boşta/yazdırılıyor/vb.)",metricsPrintProgress:"Baskı ilerlemesi 0-100%",metricsBedTemp:"Tabla sıcaklığı",metricsNozzleTemp:"Nozul sıcaklığı",metricsPrintsTotal:"Sonuca göre toplam baskılar",metricsMore:"...ve daha fazlası (katmanlar, fanlar, kuyruk, filament kullanımı)",smartPlugsDescription:"Güç kontrolünü otomatikleştirmek ve yazıcılarınız için enerji kullanımını takip etmek üzere akıllı prizleri (Tasmota veya Home Assistant) bağlayın.",allOn:"Tümü Açık",allOff:"Tümü Kapalı",addSmartPlug:"Akıllı Priz Ekle",energySummary:"Enerji Özeti",currentPower:"Mevcut Güç",plugsOnline:"{{reachable}}/{{total}} priz çevrimiçi",today:"Bugün",yesterday:"Dün",total:"Toplam",enablePlugsForSummary:"Enerji özetini görmek için prizleri etkinleştirin",addNotificationProvider:"Ekle",systemBadge:"(Sistem)",creating:"Oluşturuluyor...",changing:"Değiştiriliyor...",deleteUserAndItems:"Kullanıcıyı VE öğelerini sil",deleteUserKeepItems:"Kullanıcıyı sil, öğeleri tut (sahipsiz olur)",ok:"Tamam",twoFa:{totpTitle:"Doğrulayıcı Uygulama (TOTP)",totpDesc:"Google Authenticator, Aegis veya Authy gibi bir doğrulayıcı uygulama kullanın.",emailOtpTitle:"E-posta OTP",emailOtpDesc:"Giriş yaptığınızda {{email}} adresine tek seferlik bir kod gönder.",emailOtpNoEmail:"Bu yöntemi etkinleştirmek için hesabınıza bir e-posta adresi ekleyin.",addEmailFirst:"Hesabınızın e-posta adresi yok. E-posta OTP'yi etkinleştirmeden önce bir yöneticiden eklemesini isteyin.",setupTotp:"Doğrulayıcı Uygulamayı Ayarla",setupAuthApp:"Doğrulayıcı Uygulamayı Ayarla",setupInstructions:"Aşağıdaki QR kodunu doğrulayıcı uygulamanızla tarayın, ardından bir kodla onaylayın.",manualEntry:"Tarayamıyor musunuz? Bu gizli anahtarı manuel olarak girin:",scannedContinue:"Kodu taradım — devam et",enterCodeToConfirm:"Kurulumu onaylamak için doğrulayıcı uygulamanızdan 6 haneli kodu girin.",activate:"Etkinleştir",disableTotp:"Doğrulayıcıyı Devre Dışı Bırak",disableConfirmHint:"Doğrulayıcıyı devre dışı bırakmak için geçerli bir TOTP kodu veya yedek kod girin.",totpDisabled:"Doğrulayıcı uygulama devre dışı bırakıldı.",emailOtpEnabled:"E-posta OTP etkinleştirildi.",emailOtpDisabled:"E-posta OTP devre dışı bırakıldı.",smtpRequired:"Lütfen önce SMTP ayarlarını yapılandırın ve test edin.",invalidCode:"Geçersiz kod. Lütfen tekrar deneyin.",enableEmailOtp:"E-posta OTP'yi Etkinleştir",disableEmailOtp:"E-posta OTP'yi Devre Dışı Bırak",emailSetupEnterCode:"E-posta adresinize bir doğrulama kodu gönderildi. Bu kutunun sahibi olduğunuzu onaylamak için aşağıya girin.",verifyAndEnable:"Doğrula ve Etkinleştir",emailDisablePasswordHint:"E-posta OTP'yi devre dışı bırakmayı onaylamak için hesap parolanızı girin.",passwordPlaceholder:"Parolanızı girin",backupCodesTitle:"Yedek kodlarınızı kaydedin",backupCodesWarning:"Bu kodları güvenli bir yere kaydedin. Her kod yalnızca bir kez kullanılabilir ve tekrar gösterilmeyecektir.",backupCodesRemaining:"{{count}} yedek kod kaldı",savedCodes:"Kodlarımı kaydettim",regenBackup:"Yedek Kodları Yeniden Oluştur",regenBackupHint:"10 yeni yedek kod oluşturmak için mevcut TOTP kodunuzu girin. Mevcut tüm yedek kodlar geçersiz kılınacak.",newBackupCodes:"Yeni yedek kodlar",linkedAccounts:"Bağlı SSO Hesapları",linkedAccountsDesc:"Bu harici kimlik sağlayıcıları hesabınıza bağlıdır.",oidcUnlinked:"Hesap bağlantısı kaldırıldı."},oidc:{title:"SSO / OIDC Sağlayıcıları",desc:"Harici kimlik sağlayıcılar aracılığıyla tek oturum açmaya izin vermek için OpenID Connect sağlayıcılarını yapılandırın.",addProvider:"Sağlayıcı Ekle",newProvider:"Yeni Sağlayıcı",empty:"Henüz yapılandırılmış OIDC sağlayıcısı yok.",created:"Sağlayıcı oluşturuldu.",updated:"Sağlayıcı güncellendi.",deleted:"Sağlayıcı silindi.",refreshIcon:"Simgeyi yenile",removeIcon:"Simgeyi kaldır",iconRefreshed:"Simge yenilendi.",iconRemoved:"Simge kaldırıldı.",iconFetchFailed:"Simge sağlayıcı URL'sinden alınamadı.",deleteTitle:"Sağlayıcıyı Sil",deleteMessage:'"{{name}}" silinsin mi? Tüm bağlı kullanıcı hesaplarının bağlantısı kaldırılacak.',form:{name:"Görünen Ad",issuerUrl:"Yayıncı URL",clientId:"İstemci Kimliği",clientSecret:"İstemci Gizli Anahtarı",scopes:"Kapsamlar",iconUrl:"Simge URL (isteğe bağlı)",enabled:"Etkin",autoCreate:"Kullanıcıları otomatik oluştur",autoCreateDesc:"İlk girişte otomatik olarak yerel bir hesap oluştur.",autoLink:"Mevcut hesapları otomatik bağla",autoLinkDesc:"İlk girişte mevcut yerel hesapları e-posta eşleştirerek bağla.",secretHint:"mevcut olanı korumak için boş bırakın",secretPlaceholder:"yeni gizli anahtar",emailClaim:"E-posta İddiası",emailClaimDesc:"E-posta kimliği olarak kullanılan JWT iddiası. Azure Entra ID için 'preferred_username' veya 'upn' kullanın (email_verified göndermez). Yalnızca güvenilir iddia adlarını kullanın.",emailClaimPlaceholder:"email",emailClaimCustomClaimAutoLinkWarning:"Özel iddialar yalnızca değer kiracı tarafından yönetildiğinde otomatik bağlantı için güvenlidir (örn. Azure Entra ID upn / preferred_username). Kimlik sağlayıcınız kullanıcıların bu iddiayı kendi kendine onaylamasına izin veriyorsa otomatik bağlantıyı etkinleştirmeyin.",requireEmailVerified:"E-posta doğrulamasını gerektir",requireEmailVerifiedDesc:"E-posta iddiasını yalnızca sağlayıcı doğrulanmış olarak işaretlediğinde kabul et.",requireEmailVerifiedWarning:"Uyarı: e-posta doğrulama olmadan bile kabul edilecek. Yalnızca güvenilir sağlayıcılarla kullanın.",requireEmailVerifiedAutoLink:"Bu ayarı değiştirmek için önce otomatik bağlantıyı devre dışı bırakın.",defaultGroup:"Varsayılan Grup",defaultGroupDesc:"Otomatik oluşturulan kullanıcılara atanan grup. Ayarlanmazsa Viewers'a geri döner.",defaultGroupViewersFallback:"Viewers (varsayılan)"}},encryption:{title:"MFA Şifreleme Durumu",enabledFromEnv:"Sabit şifreleme etkin (anahtar MFA_ENCRYPTION_KEY ortam değişkeninden)",enabledFromFile:"Sabit şifreleme etkin (anahtar veri dizininden yüklendi)",enabledGenerated:"Sabit şifreleme otomatik oluşturulan anahtarla etkin",notConfigured:"Sabit şifreleme yapılandırılmamış",notConfiguredDesc:"TOTP gizli anahtarları ve OIDC client_secrets düz metin olarak saklanır. MFA_ENCRYPTION_KEY ayarlayın veya Bambuddy'yi otomatik olarak oluşturmak için yazılabilir bir veri dizini ile yeniden başlatın.",allEncrypted:"Tüm MFA gizli anahtarları sabit olarak şifrelenmiş durumda.",legacyRowsLabel:"Eski düz metin satırlar",encryptedRowsLabel:"Şifrelenmiş satırlar",legacyRowsWarning:"{{count}} eski düz metin satır algılandı. Şifrelenmiş depolamaya geçmek için OIDC sağlayıcısını yeniden kaydedin veya kullanıcının doğrulayıcı uygulamasını yeniden kaydedin.",backupHint:"Otomatik oluşturulan anahtar DATA_DIR/.mfa_encryption_key konumunda saklanır ve yerel yedek ZIP'lere dahil edilir. Yedeklerinizi güvende tutun veya MFA_ENCRYPTION_KEY'i açıkça ayarlayın.",decryptionBrokenTitle:"Şifreleme anahtarı eksik",decryptionBrokenError:"Şifreleme anahtarı artık mevcut olmadığından {{count}} şifrelenmiş kayıt şifresi çözülemiyor. Kurtarmak için önceki MFA_ENCRYPTION_KEY veya DATA_DIR/.mfa_encryption_key'i geri yükleyin.",migrationErrorWarning:"Başlangıçta {{count}} eski satır yeniden şifrelenemedi. Sunucu günlüklerini kontrol edin ve yeniden denemek için Bambuddy'yi yeniden başlatın."}},notification:{printStarted:{title:"Baskı Başladı",body:"{{printer}}: {{filename}} yazdırmaya başladı"},printCompleted:{title:"Baskı Tamamlandı",body:"{{printer}}: {{filename}} başarıyla tamamlandı"},printFailed:{title:"Baskı Başarısız",body:"{{printer}}: {{filename}} başarısız oldu"},printStopped:{title:"Baskı Durduruldu",body:"{{printer}}: {{filename}} durduruldu"},printProgress:{title:"Baskı İlerlemesi",body:"{{printer}}: {{filename}} %{{percent}} tamamlandı"},printerOffline:{title:"Yazıcı Çevrimdışı",body:"{{printer}} çevrimdışı"},printerError:{title:"Yazıcı Hatası",body:"{{printer}}: {{error}}"},filamentLow:{title:"Az Filament",body:"{{printer}}: Filament azalıyor"},maintenanceDue:{title:"Bakım Zamanı",body:"{{printer}}: {{items}} dikkat gerektiriyor"}},errors:{generic:"Bir şeyler ters gitti",networkError:"Ağ hatası. Lütfen bağlantınızı kontrol edin.",notFound:"Bulunamadı",unauthorized:"Yetkisiz",serverError:"Sunucu hatası",validationError:"Lütfen girdinizi kontrol edin",printerConnectionFailed:"Yazıcıya bağlanılamadı",saveFailed:"Değişiklikler kaydedilemedi",deleteFailed:"Silme başarısız",loadFailed:"Veri yüklenemedi"},hmsErrors:{title:"Hatalar - {{name}}",noErrors:"Hata yok",viewOnWiki:"Bambu Lab Wiki'de görüntüle",clearInstructions:"Buradan kapatmak için yazıcıdaki hataları temizleyin.",clearErrors:"Hataları Temizle",clearSuccess:"HMS hataları temizlendi",clearFailed:"HMS hataları temizlenemedi"},mqttDebug:{title:"MQTT Hata Ayıklama Günlüğü",searchPlaceholder:"Konu veya yük ara...",noMessages:"Henüz mesaj kaydedilmedi",startLoggingHint:'MQTT mesajlarını yakalamaya başlamak için "Kaydetmeye Başla"ya tıklayın',noMessagesMatch:"Filtrenizle eşleşen mesaj yok",adjustFilterHint:"Arama veya filtre kriterlerinizi ayarlamayı deneyin",incoming:"Gelen",outgoing:"Giden",loggingStopped:"Kaydetme durduruldu",loggingActive:"Kaydetme aktif - mesajlar otomatik olarak yenilenecek",startLogging:"Kaydetmeye Başla",stopLogging:"Kaydetmeyi Durdur",clearLog:"Günlüğü Temizle",topic:"Konu",timestamp:"Zaman damgası",direction:"Yön",all:"Tümü"},printerFiles:{title:"Dosya Yöneticisi",storageUsed:"Kullanılan:",storageFree:"Boş:",filterPlaceholder:"Dosyaları filtrele...",deleteButton:"Sil",deleteFiles:"{{count}} Dosya Sil",deleteFileConfirm:'"{{name}}" silinsin mi? Bu geri alınamaz.',deleteFilesConfirm:"Seçilen {{count}} dosya silinsin mi? Bu geri alınamaz.",noFiles:"Yazıcıda dosya yok",loadingFiles:"Dosyalar yükleniyor...",failedToLoad:"Dosyalar yüklenemedi",toast:{filesDeleted:"{{count}} dosya silindi",deleteFailed:"Silme başarısız: {{error}}"}},confirm:{delete:"Bunu silmek istediğinizden emin misiniz?",unsavedChanges:"Kaydedilmemiş değişiklikleriniz var. Çıkmak istediğinizden emin misiniz?",clearQueue:"Kuyruğu temizlemek istediğinizden emin misiniz?"},login:{title:"Bambuddy Giriş",subtitle:"Hesabınıza giriş yapın",username:"Kullanıcı Adı",usernamePlaceholder:"Kullanıcı adınızı girin",usernameOrEmail:"Kullanıcı Adı veya E-posta",usernameOrEmailPlaceholder:"Kullanıcı adı veya @ E-posta",password:"Parola",passwordPlaceholder:"Parolanızı girin",signIn:"Giriş yap",signingIn:"Giriş yapılıyor...",rememberMe:"Beni Hatırla",forgotPassword:"Parolanızı mı unuttunuz?",loginSuccess:"Başarıyla giriş yapıldı",loginFailed:"Giriş başarısız",enterCredentials:"Lütfen kullanıcı adı ve parola girin",enterEmail:"Lütfen e-posta adresinizi girin",oidcLoginFailed:"OIDC girişi başarısız",oidcErrors:{providerError:"Kimlik sağlayıcısı bir hata döndürdü",missingParameters:"OIDC geri arama gerekli parametreleri eksik",invalidState:"OIDC durumu geçersiz veya zaten kullanılmış",stateExpired:"OIDC giriş oturumu süresi doldu — lütfen tekrar deneyin",providerNotFound:"OIDC sağlayıcısı bulunamadı",discoveryFailed:"OIDC keşif belgesi alınamadı",invalidDiscovery:"OIDC keşif belgesi geçersiz",networkError:"OIDC belirteç değişimi sırasında ağ hatası",badResponse:"OIDC belirteç değişimi sırasında beklenmeyen yanıt",noIdToken:"OIDC sağlayıcısı bir ID belirteci döndürmedi",validationFailed:"OIDC belirteç doğrulaması başarısız",nonceMismatch:"OIDC nonce uyuşmazlığı — olası tekrar saldırısı",missingSubClaim:"OIDC belirteci sub iddiasını içermiyor",noLinkedAccount:"Bu OIDC kimliğine bağlı yerel hesap yok",accountInactive:"Hesabınız aktif değil",userResolutionFailed:"Hesabınız çözümlenemedi",internalError:"OIDC girişi sırasında dahili bir hata oluştu",tokenExchangeFailed:"OIDC belirteç değişimi başarısız"},forgotPasswordTitle:"Parolayı Unuttum",forgotPasswordMessage:"Parolanızı unuttuysanız, sıfırlamak için lütfen sistem yöneticinizle iletişime geçin.",forgotPasswordEmailMessage:"E-posta adresinizi girin, size yeni bir parola göndereceğiz.",emailAddress:"E-posta Adresi",emailPlaceholder:"eposta.adresi@example.com",cancel:"İptal",sending:"Gönderiliyor...",sendResetEmail:"Sıfırlama E-postası Gönder",howToReset:"Parolanızı nasıl sıfırlarsınız:",resetStep1:"Bambuddy yöneticinizle iletişime geçin",resetStep2:"Kullanıcı Yönetiminde parolanızı sıfırlamasını isteyin",resetStep3:"Sizin için yeni bir geçici parola belirleyebilirler",resetStep4:"Yeni parolayla giriş yapın ve Ayarlarda değiştirin",gotIt:"Anladım",resetPassword:{title:"Yeni Parola Belirle",subtitle:"Aşağıya yeni parolanızı girin ve onaylayın.",newPassword:"Yeni Parola",newPasswordPlaceholder:"En az 8 karakter",confirmPassword:"Parolayı Onayla",confirmPasswordPlaceholder:"Yeni parolayı tekrarlayın",saving:"Kaydediliyor…",submit:"Yeni Parola Belirle",backToLogin:"Girişe dön",passwordsDoNotMatch:"Parolalar eşleşmiyor",passwordTooShort:"Parola en az 8 karakter olmalı",resetFailed:"Parola sıfırlama başarısız. Bağlantının süresi dolmuş olabilir."},twoFA:{title:"İki Faktörlü Kimlik Doğrulama",subtitle:"Hesabınız 2FA ile korunuyor. Aşağıya doğrulama kodunu girin.",methodAuthenticator:"Doğrulayıcı Uygulama",methodEmail:"E-posta Kodu",methodBackup:"Yedek Kod",instructionsTotp:"Doğrulayıcı uygulamanızı açın ve Bambuddy için 6 haneli kodu girin.",instructionsEmail:"E-posta adresinize 6 haneli bir kod gönderildi. 10 dakika içinde sona erer.",instructionsEmailNotSent:"E-posta yoluyla bir doğrulama kodu almak için aşağıdaki düğmeye tıklayın.",instructionsBackup:"8 karakterlik yedek kurtarma kodlarınızdan birini girin. Her kod yalnızca bir kez kullanılabilir.",sendCodeButton:"E-posta ile Kod Gönder",sendingCode:"Gönderiliyor...",resendCode:"Kodu yeniden gönder",codeLabel:"Doğrulama Kodu",backupCodeLabel:"Yedek Kod",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"Doğrula",verifyingButton:"Doğrulanıyor...",backToLogin:"← Girişe dön",orContinueWith:"veya şununla devam edin",signInWith:"{{provider}} ile giriş yap",enterCode:"Lütfen doğrulama kodunu girin",sendCodeFailed:"Doğrulama kodu gönderilemedi",invalidCode:"Geçersiz kod. Lütfen tekrar deneyin."}},setup:{title:"Bambuddy Kurulumu",subtitle:"Bambuddy örneğiniz için kimlik doğrulamayı yapılandırın",enableAuth:"Kimlik Doğrulamayı Etkinleştir",adminAccount:"Yönetici Hesabı",adminAccountDesc:"Yönetici kullanıcılar zaten varsa, kimlik doğrulama mevcut yönetici hesapları kullanılarak etkinleştirilecek. Mevcut yöneticileri kullanmak için aşağıdaki alanları boş bırakın veya yeni bir yönetici kullanıcı oluşturmak için yeni kimlik bilgileri girin.",adminUsername:"Yönetici Kullanıcı Adı",adminPassword:"Yönetici Parolası",optionalIfAdminExists:"(yönetici kullanıcılar varsa isteğe bağlı)",adminUsernamePlaceholder:"Yönetici kullanıcı adı girin (isteğe bağlı)",adminPasswordPlaceholder:"Yönetici parolası girin (isteğe bağlı)",confirmPassword:"Parolayı Onayla",confirmPasswordPlaceholder:"Yönetici parolasını onayla",settingUp:"Kuruluyor...",completeSetup:"Kurulumu Tamamla",toast:{authEnabledAdminCreated:"Kimlik doğrulama etkinleştirildi ve yönetici kullanıcı oluşturuldu",authEnabledExistingAdmins:"Mevcut yönetici kullanıcılar kullanılarak kimlik doğrulama etkinleştirildi",setupCompleted:"Kurulum tamamlandı",enterBothCredentials:"Lütfen hem yönetici kullanıcı adı hem de parola girin veya mevcut yönetici kullanıcıları kullanmak için her ikisini de boş bırakın",passwordsDoNotMatch:"Parolalar eşleşmiyor",passwordTooShort:"Parola en az 6 karakter olmalı"}},changePassword:{title:"Parolayı Değiştir",currentPassword:"Mevcut Parola",currentPasswordPlaceholder:"Mevcut parolayı girin",newPassword:"Yeni Parola",newPasswordPlaceholder:"Yeni parolayı girin (en az 6 karakter)",confirmPassword:"Yeni Parolayı Onayla",confirmPasswordPlaceholder:"Yeni parolayı onayla",passwordsDoNotMatch:"Parolalar eşleşmiyor",passwordTooShort:"Parola en az 6 karakter olmalı",changing:"Değiştiriliyor...",success:"Parola başarıyla değiştirildi",failed:"Parola değiştirilemedi"},plateAlert:{title:"Baskı Duraklatıldı!",message:"Baskı plakasında nesneler algılandı. Baskı otomatik olarak duraklatıldı. Lütfen plakayı temizleyin ve baskıya devam edin.",understand:"Anladım"},camera:{title:"Kamera Görünümü",invalidPrinterId:"Geçersiz yazıcı ID'si",live:"Canlı",snapshot:"Anlık Görüntü",restartStream:"Akışı yeniden başlat",refreshSnapshot:"Anlık görüntüyü yenile",fullscreen:"Tam ekran",exitFullscreen:"Tam ekrandan çık",connectingToCamera:"Kameraya bağlanılıyor...",capturingSnapshot:"Anlık görüntü yakalanıyor...",connectionLost:"Bağlantı kesildi",connectionFailed:"Kamera bağlantısı başarısız",reconnecting:"{{countdown}}sn içinde yeniden bağlanılıyor... (deneme {{attempt}}/{{max}})",reconnectNow:"Şimdi yeniden bağlan",cameraUnavailable:"Kamera kullanılamıyor",cameraUnavailableDesc:"Yazıcının açık ve bağlı olduğundan emin olun.",noCamera:"Kamera yok",retry:"Yeniden dene",cameraStream:"Kamera akışı",zoomOut:"Uzaklaştır",zoomIn:"Yakınlaştır",resetZoom:"Yakınlaştırmayı sıfırla",recording:"Kaydediyor",startRecording:"Kaydı Başlat",stopRecording:"Kaydı Durdur",chamberLight:"Hazne ışığını aç/kapat",unavailable:"Kamera kullanılamıyor",diagnose:{button:"Tanıla",modalTitle:"Kamera tanılaması",running:"Tanılama çalışıyor...",runFailed:"Tanılama çalıştırılamadı: {{error}}",retry:"Tekrar çalıştır",stage:{tcp_reachable:"Ağ erişilebilirliği",first_frame:"Kare yakalama",live_stream_active:"Canlı akış aktif"},summary:{all_ok:"Kamera çalışıyor. Tanılama tüm aşamaları başarıyla tamamladı.",live_stream_active_healthy:"Kamera şu anda son karelerle akış yapıyor — teste gerek yok.",printer_unreachable:"Yazıcıya erişilemiyor. IP adresini, ağ bağlantısını ve yazıcının açık olduğunu kontrol edin.",camera_port_closed:"Yazıcıya erişilebilir ancak kamera portu kapalı. Yazıcı ayarlarında yalnızca LAN modunun ve Geliştirici Modunun etkin olduğundan emin olun.",no_frame:"Kameraya bağlanıldı ancak hiç kare alınmadı. Tekrar deneyin veya yazıcı ayarlarında kameranın etkin olduğunu kontrol edin.",unknown_failure:"Kamera tanılaması bilinmeyen bir nedenle başarısız oldu. Ayrıntılar için destek günlüğüne bakın."},meta:{protocol:"Protokol",port:"Port",profile:"Profil"}}},groups:{title:"Grup Yönetimi",subtitle:"Erişim kontrolü için izin gruplarını yönetin",backToSettings:"Ayarlara Dön",createGroup:"Grup Oluştur",noPermission:"Bu sayfaya erişim izniniz yok.",system:"Sistem",noDescription:"Açıklama yok",usersCount:"{{count}} kullanıcı",permissionsCount:"{{count}} izin",edit:"Düzenle",delete:"Sil",toast:{created:"Grup başarıyla oluşturuldu",updated:"Grup başarıyla güncellendi",deleted:"Grup başarıyla silindi",enterGroupName:"Lütfen bir grup adı girin"},modal:{editGroup:"Grubu Düzenle",createGroup:"Grup Oluştur",cancel:"İptal",saving:"Kaydediliyor...",creating:"Oluşturuluyor...",saveChanges:"Değişiklikleri Kaydet"},form:{groupName:"Grup Adı",groupNamePlaceholder:"Grup adını girin",systemGroupWarning:"Sistem grubu adları değiştirilemez",description:"Açıklama",descriptionPlaceholder:"Açıklama girin (isteğe bağlı)",permissions:"İzinler ({{count}} seçildi)"},deleteModal:{title:"Grubu Sil",message:"Bu grubu silmek istediğinizden emin misiniz? Bu gruptaki kullanıcılar bu izinleri kaybedecek.",confirm:"Grubu Sil"},editor:{title:"Grubu Düzenle",createTitle:"Grup Oluştur",search:"İzinlerde ara...",selectAll:"Tümünü Seç",clearAll:"Tümünü Temizle",permissionsSelected:"{{count}} seçildi",noResults:"Aramanızla eşleşen izin yok"}},users:{title:"Kullanıcı Yönetimi",subtitle:"Kullanıcıları ve Bambuddy örneğinize erişimlerini yönetin",backToSettings:"Ayarlara Dön",createUser:"Kullanıcı Oluştur",noPermission:"Bu sayfaya erişim izniniz yok.",admin:"Yönetici",noGroups:"Grup yok",active:"Aktif",inactive:"Pasif",edit:"Düzenle",delete:"Sil",system:"Sistem",noGroupsAvailable:"Kullanılabilir grup yok",table:{username:"Kullanıcı Adı",groups:"Gruplar",status:"Durum",actions:"İşlemler"},toast:{created:"Kullanıcı başarıyla oluşturuldu",updated:"Kullanıcı başarıyla güncellendi",deleted:"Kullanıcı başarıyla silindi",fillRequired:"Lütfen tüm zorunlu alanları doldurun",passwordsDoNotMatch:"Parolalar eşleşmiyor",passwordTooShort:"Parola en az 6 karakter olmalı",ldapProvisioned:'"{{username}}" LDAP kullanıcısı tedarik edildi'},modal:{createUser:"Kullanıcı Oluştur",editUser:"Kullanıcıyı Düzenle",cancel:"İptal",creating:"Oluşturuluyor...",saving:"Kaydediliyor...",saveChanges:"Değişiklikleri Kaydet",advancedAuthSubtitle:"Gelişmiş Kimlik Doğrulama ile",tabsAriaLabel:"Kullanıcı kaynağı",localTab:"Yerel",ldapTab:"LDAP",ldapSearchLabel:"Dizinde ara",ldapSearchPlaceholder:"Bir kullanıcı adı, isim veya e-posta yazın...",ldapMinChars:"Aramak için en az 2 karakter yazın",ldapTypeToSearch:"LDAP dizininde aramak için yazmaya başlayın",ldapSearching:"Dizinde aranıyor...",ldapNoResults:"Dizinde eşleşen kullanıcı yok",ldapSearchError:"Dizin araması başarısız. LDAP sunucu durumunu kontrol edin.",ldapAlreadyProvisioned:"Zaten tedarik edildi",ldapSelectedLabel:"Seçildi",ldapProvision:"Kullanıcıyı tedarik et",ldapProvisioning:"Tedarik ediliyor...",ldapErrorProvision:"Tedarik başarısız. LDAP sunucu durumunu kontrol edin ve tekrar deneyin."},form:{username:"Kullanıcı Adı",usernamePlaceholder:"Kullanıcı adını girin",email:"E-posta",emailPlaceholder:"kullanici@example.com",password:"Parola",passwordPlaceholder:"Parolayı girin",confirmPassword:"Parolayı Onayla",confirmPasswordPlaceholder:"Parolayı onayla",newPasswordPlaceholder:"Yeni parolayı girin",confirmNewPasswordPlaceholder:"Yeni parolayı onayla",leaveBlankToKeep:"mevcut olanı korumak için boş bırakın",groups:"Gruplar",optional:"isteğe bağlı",autoGeneratedPassword:"Güvenli bir parola otomatik olarak oluşturulacak ve kullanıcıya e-posta ile gönderilecek.",passwordManagedByAdvancedAuth:'Parola Gelişmiş Kimlik Doğrulama tarafından yönetilir. Kullanıcıya e-posta yoluyla yeni bir parola göndermek için "Parolayı Sıfırla"yı kullanın.',resetPassword:"Parolayı Sıfırla",resettingPassword:"Parola Sıfırlanıyor..."},deleteModal:{title:"Kullanıcıyı Sil",message:"Bu kullanıcıyı silmek istediğinizden emin misiniz? Bu işlem geri alınamaz.",confirm:"Kullanıcıyı Sil"}},streamOverlay:{title:"Akış Bindirmesi",invalidPrinterId:"Geçersiz yazıcı ID'si",cameraStream:"Kamera akışı",progress:"İlerleme",eta:"ETA",printerIdle:"Yazıcı boşta",printerOffline:"Yazıcı çevrimdışı",status:{printing:"Yazdırılıyor",paused:"Duraklatıldı",finished:"Tamamlandı",failed:"Başarısız",idle:"Boşta",unknown:"Bilinmiyor"}},profiles:{title:"Profiller",subtitle:"Dilimleyici ön ayarlarını ve basınç ilerleme kalibrasyonlarını yönetin",tabs:{bambuCloud:"Bambu Cloud",orcaCloud:"Orca Cloud",local:"Yerel Profiller",kprofiles:"K-Profilleri"},orcaCloud:{connectedAs:"Bağlı kullanıcı",logout:"Bağlantıyı kes",noLogoutPermission:"Bağlantıyı kesme izniniz yok",noConnectPermission:"Orca Cloud'a bağlanma izniniz yok",retry:"Yeniden dene",back:"Farklı bir giriş yöntemi kullan",connect:{title:"Orca Cloud'a bağlan",description:"Dilimleyici profillerinizi Bambuddy ile senkronize etmek için Orca Cloud hesabınıza giriş yapın."},providers:{google:"Google ile giriş yap",apple:"Apple ile giriş yap",github:"GitHub ile giriş yap",email:"E-posta ve şifre ile giriş yap"},password:{title:"E-posta ve şifre ile giriş yap",email:"E-posta",emailPlaceholder:"sen@ornek.com",password:"Şifre",submit:"Giriş yap"},paste:{title:"Girişi tamamla",step1:"Yeni bir sekme Orca Cloud giriş sayfasıyla açıldı. Orca hesabınızla giriş yapın.",step2:`Tarayıcınız yüklenemeyen bir "localhost" URL'sine yönlendirilecektir. Bu beklenen bir durumdur — bize gereken URL budur.`,step3:"Tarayıcınızın adres çubuğundaki URL'nin tamamını kopyalayın ve aşağıya yapıştırın.",signInUrl:"Giriş sekmesi açılmadıysa bu URL'ye tıklayın:",label:"Geri çağrı URL'sini buraya yapıştırın",placeholder:"http://localhost:41172/callback?code=...&state=...",submit:"Bağlantıyı tamamla"},profiles:{title:"Orca Cloud profilleriniz ({{count}})",refresh:"Yenile",empty:"Orca Cloud hesabınızda henüz profil bulunamadı."},toast:{connected:"{{email}} olarak Orca Cloud'a bağlanıldı",disconnected:"Orca Cloud bağlantısı kesildi"},errors:{startFailed:"Orca Cloud giriş akışı başlatılamadı.",finishFailed:"Orca Cloud girişi tamamlanamadı.",passwordFailed:"Bu e-posta ve şifreyle giriş yapılamadı.",passwordEmpty:"Lütfen hem e-postanızı hem de şifrenizi girin.",emptyPaste:"Lütfen tarayıcınızdan geri çağrı URL'sini yapıştırın.",noCode:"Bu URL bir Orca Cloud geri çağrısına benzemiyor (code parametresi yok). Tam URL'yi adres çubuğundan kopyalayın."}},localProfiles:{title:"Yerel Profiller",subtitle:"OrcaSlicer'dan dilimleyici ön ayarlarını içe aktar ve yönet",import:"Profilleri İçe Aktar",importDesc:".bbscfg, .bbsflmt, .orca_filament, .zip veya .json dosyalarını buraya bırakın",importing:"İçe aktarılıyor...",search:"Yerel ön ayarlarda ara...",noPresets:"Henüz yerel ön ayar yok",noSearchResults:"Aramanızla eşleşen ön ayar yok",badge:"Yerel",edit:"Düzenle",delete:"Sil",cancel:"İptal",deleteConfirmTitle:"Ön Ayarı Sil",deleteConfirm:"Bu ön ayarı silmek istediğinizden emin misiniz? Bu geri alınamaz.",source:"Kaynak",inheritsFrom:"Miras alır",filamentType:"Tür",vendor:"Satıcı",compatiblePrinters:"Yazıcılar",nozzleTemp:"Nozul Sıcaklığı",cost:"Maliyet",density:"Yoğunluk",pressureAdvance:"Basınç İlerlemesi",filament:"Filament",process:"İşlem",printer:"Yazıcı",toast:{importSuccess:"{{count}} ön ayar içe aktarıldı",importSkipped:"{{count}} ön ayar atlandı (yinelenenler)",importError:"İçe aktarma sırasında {{count}} hata",deleted:"Ön ayar silindi",updated:"Ön ayar güncellendi"}},connectedAs:"Bağlı kullanıcı",logout:"Çıkış",noLogoutPermission:"Çıkış yapma izniniz yok",failedToLoad:"Profiller yüklenemedi",retry:"Yeniden dene",time:{justNow:"Az önce",minsAgo:"{{count}}dk önce",hoursAgo:"{{count}}sa önce",daysAgo:"{{count}}g önce"},toast:{loggedOut:"Çıkış yapıldı"},login:{title:"Bambu Cloud'a Bağlan",subtitle:"Dilimleyici ön ayarlarınızı cihazlar arasında senkronize edin",email:"E-posta",password:"Parola",region:"Bölge",regionGlobal:"Global",regionChina:"Çin",verificationCode:"Doğrulama Kodu",totpCode:"Doğrulayıcı Kodu",checkEmail:"E-postanızı ({{email}}) 6 haneli kod için kontrol edin",enterTotpHint:"Doğrulayıcı uygulamanızdan 6 haneli kodu girin",accessToken:"Erişim Belirteci",accessTokenHint:"Bambu Cloud erişim belirtecinizi yapıştırın. Çin bölgesi hesapları bu yolu kullanmalıdır (telefon bağımlı — e-posta girişi kullanılamaz). MakerWorld çerezlerinden belirteci nasıl alacağınız için wiki'ye bakın.",back:"Geri",loginButton:"Giriş",verifyButton:"Doğrula",setTokenButton:"Belirteç Ayarla",useToken:"Erişim belirteci kullan",useEmail:"E-posta ile giriş yap",toast:{loggedIn:"Başarıyla giriş yapıldı",codeSent:"Doğrulama kodu e-postanıza gönderildi",enterTotp:"Doğrulayıcı uygulamanızdan kod girin",tokenSet:"Belirteç başarıyla ayarlandı"}},presets:{myPreset:"Ön ayarım (düzenlenebilir)",duplicate:"Çoğalt",editable:"Düzenlenebilir",failedToLoadDetails:"Ön ayar ayrıntıları yüklenemedi",deleteConfirm:"Bu ön ayar silinsin mi?",deleteWarning:`Bu, "{{name}}" ön ayarını Bambu Cloud'dan kalıcı olarak silecek. Bu geri alınamaz.`,noDuplicatePermission:"Ön ayarları çoğaltma izniniz yok",noEditPermission:"Ön ayarları düzenleme izniniz yok",noDeletePermission:"Ön ayarları silme izniniz yok",types:{filament:"Filament ön ayarı",printer:"Yazıcı ön ayarı",process:"İşlem ön ayarı"},toast:{deleted:"Ön ayar silindi",created:"Ön ayar oluşturuldu",updated:"Ön ayar güncellendi",duplicated:"Ön ayar çoğaltıldı",fieldAdded:'"{{key}}" alanı eklendi',exported:"Ön ayar dışa aktarıldı"},baseLabel:"Taban: {{name}}",currentLabel:"Mevcut: {{name}}",newPreset:"Yeni Ön Ayar",editPreset:"Ön Ayarı Düzenle",duplicatePreset:"Ön Ayarı Çoğalt",createNewPreset:"Yeni Ön Ayar Oluştur",customizeSettings:"Yeni ön ayarınız için ayarları özelleştirin",compareWithBase:"Taban ön ayarla karşılaştır",compare:"Karşılaştır",basePreset:"Taban Ön Ayar",selectBasePreset:"Taban ön ayar seç...",presetName:"Ön Ayar Adı",myCustomPreset:"Özel ön ayarım",inheritsFrom:"Miras alır",dropJsonToImport:"İçe aktarmak için JSON bırakın",tabs:{common:"Ortak",allFields:"Tüm Alanlar"},availableFields:"Kullanılabilir Alanlar",searchFieldsPlaceholder:"Alanlarda ara...",noMatchingFields:"Eşleşen alan yok",allFieldsAdded:"Tüm alanlar eklendi",addCustomField:"Özel alan ekle",yourOverrides:"Geçersiz Kılmalarınız",noOverridesYet:"Henüz geçersiz kılma yok",clickFieldsToAdd:"Eklemek için soldaki alanlara tıklayın",saveAsTemplate:"Şablon olarak kaydet",jsonTip:"İpucu: Ayarları içe aktarmak için bu modalin herhangi bir yerine .json dosyasını sürükleyip bırakın"},cloudView:{searchPlaceholder:"Ön ayarlarda ara...",templates:"Şablonlar",refresh:"Yenile",newPreset:"Yeni Ön Ayar",clearFilters:"Filtreleri temizle",compareMode:"Karşılaştırma Modu",selectAnotherPreset:"Başka bir {{type}} ön ayarı seç",clickTwoPresets:"Karşılaştırmak için aynı türden iki ön ayara tıklayın",selectFirst:"1. İlkini seç",selectSecond:"2. İkincisini seç",compareNow:"Şimdi Karşılaştır",lastSynced:"Son senkronizasyon:",showingCount:"{{total}} ön ayardan {{showing}} tanesi gösteriliyor",noPresetsFound:"Ön ayar bulunamadı",columns:{filament:"Filament",process:"İşlem",printer:"Yazıcı"},noFilamentPresets:"Filament ön ayarı yok",noProcessPresets:"İşlem ön ayarı yok",noPrinterPresets:"Yazıcı ön ayarı yok",filters:{type:"Tür",owner:"Sahip",printer:"Yazıcı",nozzle:"Nozul",filament:"Filament",layer:"Katman",all:"Tümü",myPresets:"Ön Ayarlarım",builtIn:"Yerleşik",process:"İşlem"},noTemplatesPermission:"Şablonları yönetme izniniz yok",noRefreshPermission:"Profilleri yenileme izniniz yok",noCreatePermission:"Ön ayar oluşturma izniniz yok"},templates:{title:"Hızlı Şablonlar",noTemplates:"Henüz şablon yok",createFirst:"Ön ayar düzenleyicisinden şablonlar oluşturun",typeFilter:"Tür:",deleteTitle:"Şablonu Sil",deleteWarning:"Bu işlem geri alınamaz",deleteConfirm:'"{{name}}" silmek istediğinizden emin misiniz?',namePlaceholder:"Şablon adı",descriptionPlaceholder:"Açıklama",settingsJson:"Ayarlar (JSON)",fieldsCount:"{{count}} alan",shownInModals:"Modallerde gösterilir",hiddenInModals:"Modallerde gizli",apply:"Uygula",toast:{deleted:"Şablon silindi",updated:"Şablon güncellendi",created:"Şablon oluşturuldu",applied:"Şablon uygulandı"}}},support:{debugLoggingActive:"Hata ayıklama kaydı aktif",manageLogs:"Yönet",collectItem7:"Yazıcı bağlantısı ve firmware sürümleri",collectItem8:"Entegrasyon durumu (Spoolman, MQTT, HA)",collectItem9:"Ağ arayüzleri (yalnızca alt ağlar)",collectItem10:"Python paket sürümleri",collectItem11:"Veritabanı sağlık kontrolleri",collectItem12:"Docker ortam ayrıntıları",bundleGenerating:"Paket oluşturuluyor...",bundleStepConnection:"Yazıcı bağlantı kontrolleri çalıştırılıyor",bundleStepVirtualPrinters:"Sanal yazıcı kurulum kontrolleri çalıştırılıyor",bundleStepLogScan:"Son günlüklerde bilinen sorunlar taranıyor",bundleStepBuild:"Destek paketi ZIP oluşturuluyor"},fileManager:{title:"Dosya Yöneticisi",subtitle:"Baskı dosyalarınızı organize edin ve yönetin",uploadFiles:"Dosya Yükle",newFolder:"Yeni Klasör",folderName:"Klasör Adı",folderNamePlaceholder:"örn., Fonksiyonel Parçalar",renameFile:"Dosyayı Yeniden Adlandır",renameFolder:"Klasörü Yeniden Adlandır",invalidFilenameChar:'Baskı dosya adlarında "{{char}}" karakterine izin verilmiyor. Yazıcının SD kartı şu karakterleri reddeder: < > : " / \\ | ? *',moveFiles:"{{count}} Dosyayı Taşı",rootNoFolder:"Kök (Klasör Yok)",current:"mevcut",linkFolder:"Klasörü Bağla",linkFolderDescription:'Hızlı erişim için "{{name}}" klasörünü bir projeye veya arşive bağla.',project:"Proje",archive:"Arşiv",noProjectsFound:"Proje bulunamadı",noArchivesFound:"Arşiv bulunamadı",unlink:"Bağlantıyı Kaldır",link:"Bağla",dragDropFiles:"Dosyaları buraya sürükleyip bırakın",dropFilesHere:"Dosyaları buraya bırakın",orClickToBrowse:"veya göz atmak için tıklayın",allFileTypesSupported:"Tüm dosya türleri desteklenir. ZIP dosyaları çıkarılacak.",zipFilesDetected:"ZIP dosyaları algılandı",zipExtractOptions:"ZIP dosyaları çıkarılacak. Klasör yapısını nasıl yöneteceğinizi seçin:",preserveZipStructure:"ZIP'ten klasör yapısını koru",createFolderFromZip:"ZIP dosya adından klasör oluştur",stlThumbnailGeneration:"STL küçük resim oluşturma",zipMayContainStl:"ZIP dosyaları STL dosyaları içerebilir. Küçük resimler çıkarma sırasında oluşturulabilir.",thumbnailsCanBeGenerated:"STL dosyaları için küçük resimler oluşturulabilir. Büyük modellerin işlenmesi daha uzun sürebilir.",generateThumbnailsForStl:"STL dosyaları için küçük resim oluştur",threemfDetected:"3MF dosyaları algılandı",threemfExtractionInfo:"Yazıcı modeli, malzeme, renk ve baskı ayarları 3MF dosyalarından otomatik olarak çıkarılacak.",willBeExtracted:"Çıkarılacak",filesExtracted:"{{count}} dosya çıkarıldı",uploadComplete:"Yükleme tamamlandı: {{succeeded}} başarılı",uploadFailed:"Yükleme başarısız",zipFilesFailed:"{{count}} dosya başarısız",uploading:"Yükleniyor...",changeLink:"Bağlantıyı Değiştir...",linkTo:"Şuna bağla...",linkToProjectOrArchive:"Projeye veya arşive bağla",addToQueue:"Kuyruğa Ekle",schedulePrint:"Zamanla",generateThumbnail:"Küçük Resim Oluştur",generateThumbnails:"Küçük Resimler Oluştur",generateThumbnailsForMissing:"Eksik olan STL dosyaları için küçük resimler oluştur",gridView:"Izgara görünümü",listView:"Liste görünümü",lowDiskSpaceWarning:"Düşük disk alanı uyarısı",lowDiskSpaceDetails:"Toplam {{total}} alandan yalnızca {{free}} boş. Eşik ayarlarda {{threshold}} GB olarak ayarlanmış.",files:"Dosyalar",folders:"Klasörler",size:"Boyut",free:"Boş",allFiles:"Tüm Dosyalar",allExternal:"Harici",externalIsEmpty:"Harici dosya yok",externalEmptyDescription:"Bağlı harici klasörlerinizdeki dosyalar burada görünecek.",wrap:"Sar",enableTextWrapping:"Metin sarmayı etkinleştir",disableTextWrapping:"Metin sarmayı devre dışı bırak",collapse:"Daralt",collapseFoldersByDefault:"Klasörleri varsayılan olarak daralt",expandFoldersByDefault:"Klasörleri varsayılan olarak genişlet",dragToResizeTooltip:"Yeniden boyutlandırmak için sürükleyin, sıfırlamak için çift tıklayın",searchFiles:"Dosyalarda ara...",allTypes:"Tüm türler",prints:"Baskılar",ascending:"Artan",descending:"Azalan",resultsCount:"{{total}} dosyadan {{showing}} tanesi",selectAll:"Tümünü Seç",deselectAll:"Seçimi Kaldır",selected:"{{count}} seçildi",adding:"Ekleniyor...",loadingFiles:"Dosyalar yükleniyor...",folderIsEmpty:"Klasör boş",noFilesYet:"Henüz dosya yok",folderEmptyDescription:"Başlamak için bu klasöre dosya yükleyin veya dosyaları taşıyın.",noFilesDescription:"Baskıyla ilgili dosyalarınızı organize etmeye başlamak için dosya yükleyin.",noMatchingFiles:"Eşleşen dosya yok",noMatchingFilesDescription:"Mevcut arama veya filtre kriterlerinizle eşleşen dosya yok.",clearFilters:"Filtreleri temizle",printedCount:"{{count}}x yazdırıldı",uploadedBy:"Yükleyen",deleteFolder:"Klasörü Sil",deleteFile:"Dosyayı Sil",deleteFilesCount:"{{count}} Dosya Sil",deleteFolderConfirm:"Bu klasörü silmek istediğinizden emin misiniz? İçindeki tüm dosyalar da silinecek.",deleteFileConfirm:"Bu dosyayı silmek istediğinizden emin misiniz?",deleteFilesConfirm:"{{count}} seçili dosyayı silmek istediğinizden emin misiniz? Bu işlem geri alınamaz.",deleting:"Siliniyor...",noPermissionRenameFolder:"Klasörleri yeniden adlandırma izniniz yok",noPermissionLinkFolder:"Klasörleri bağlama izniniz yok",noPermissionDeleteFolder:"Klasörleri silme izniniz yok",noPermissionPrint:"Yazdırma izniniz yok",noPermissionAddToQueue:"Kuyruğa ekleme izniniz yok",noPermissionSlice:"Dosyaları dilimleme izniniz yok",noPermissionDownload:"Dosyaları indirme izniniz yok",noPermissionRenameFile:"Bu dosyayı yeniden adlandırma izniniz yok",noPermissionGenerateThumbnail:"Küçük resim oluşturma izniniz yok",noPermissionDeleteFile:"Bu dosyayı silme izniniz yok",noPermissionCreateFolder:"Klasör oluşturma izniniz yok",noPermissionUpload:"Dosya yükleme izniniz yok",noPermissionMoveFiles:"Dosyaları taşıma izniniz yok",noPermissionDeleteFiles:"Dosyaları silme izniniz yok",linkExternal:"Harici Bağla",linkExternalFolder:"Harici Klasör Bağla",linkExternalFolderDescription:"Bir ana bilgisayar dizinini (NAS, USB, ağ paylaşımı) Dosya Yöneticisine bağla. Dosyalar kopyalanmaz — orijinal yoldan doğrudan erişilir.",externalFolderNamePlaceholder:"örn., NAS Baskıları",externalPath:"Ana Bilgisayar Yolu",externalPathHelp:"Docker ana bilgisayarındaki dizinin mutlak yolu. Konteynere bind-mount edilmiş olmalıdır.",readOnly:"Salt Okunur",readOnlyHelp:"yüklemeleri ve silmeleri engeller",showHiddenFiles:"Gizli dosyaları göster (nokta dosyaları)",externalFolder:"Harici Klasör",scanFolder:"Tara",toast:{folderCreated:"Klasör oluşturuldu",folderDeleted:"Klasör silindi",fileDeleted:"Dosya silindi",filesDeleted:"{{count}} dosya silindi",filesMoved:"Dosyalar taşındı",folderLinked:"Klasör bağlandı",folderUnlinked:"Klasör bağlantısı kaldırıldı",externalFolderLinked:"Harici klasör bağlandı ve tarandı",folderScanned:"Tarama tamamlandı: {{added}} eklendi, {{removed}} kaldırıldı",addedToQueue:"Kuyruğa {{count}} dosya eklendi",addedToQueuePartial:"{{added}} dosya eklendi, {{failed}} başarısız",failedToAddToQueue:"Dosyalar eklenemedi: {{error}}",fileRenamed:"Dosya yeniden adlandırıldı",folderRenamed:"Klasör yeniden adlandırıldı",thumbnailsGenerated:"{{count}} küçük resim oluşturuldu",thumbnailsGeneratedPartial:"{{succeeded}} küçük resim oluşturuldu, {{failed}} başarısız",noStlMissingThumbnails:"Küçük resmi eksik STL dosyası yok",failedToGenerateThumbnails:"Küçük resimler oluşturulamadı: {{error}}",thumbnailGenerated:"Küçük resim oluşturuldu",failedToGenerateThumbnail:"Küçük resim oluşturulamadı: {{error}}"}},projects:{title:"Projeler",subtitle:"3D baskı projelerinizi organize edin ve takip edin",newProject:"Yeni Proje",editProject:"Projeyi Düzenle",deleteProject:"Projeyi Sil",projectName:"Proje Adı",description:"Açıklama",noProjects:"Henüz proje yok",noProjectsFiltered:"{{status}} proje yok",noProjectsFilteredHelp:"Hiç {{status}} projeniz yok. Projeler durumları değiştiğinde burada görünecek.",createFirst:"İlgili baskıları organize etmeye, ilerlemeyi takip etmeye ve yapımlarınızı yönetmeye başlamak için ilk projenizi oluşturun.",createFirstButton:"İlk Projenizi Oluşturun",create:"Oluştur",files:"Dosyalar",prints:"Baskılar",plates:"plaka",parts:"parça",lastModified:"Son Değiştirme",deleteConfirm:"Bu projeyi silmek istediğinizden emin misiniz? Arşivler ve kuyruk öğelerinin bağlantısı kaldırılacak ancak silinmeyecek.",addFiles:"Dosya Ekle",removeFile:"Dosyayı Kaldır",viewDetails:"Detayları Görüntüle",namePlaceholder:"örn., Voron 2.4 Yapımı",descriptionPlaceholder:"İsteğe bağlı açıklama...",urlLabel:"URL",urlPlaceholder:"https://makerworld.com/...",urlInvalid:"URL http:// veya https:// ile başlamalı",openExternalUrl:"Proje URL'sini aç",coverImageLabel:"Kapak fotoğrafı",coverImageAlt:"Proje kapak fotoğrafı",coverImageUpload:"Yükle",coverImageReplace:"Değiştir",coverImageRemove:"Kaldır",color:"Renk",targetPlates:"Hedef Plakalar",targetPlatesPlaceholder:"örn., 25",targetPlatesHelp:"Baskı işi sayısı",targetParts:"Hedef Parçalar",targetPartsPlaceholder:"örn., 150",targetPartsHelp:"Gereken toplam nesne",tagsLabel:"Etiketler (virgülle ayrılmış)",tagsPlaceholder:"örn., voron, fonksiyonel, hediye",dueDate:"Son Tarih",priority:"Öncelik",priorityLow:"Düşük",priorityNormal:"Normal",priorityHigh:"Yüksek",priorityUrgent:"Acil",statusActive:"Aktif",statusCompleted:"Tamamlandı",statusArchived:"Arşivlendi",done:"Tamamlandı",completed:"tamamlandı",failed:"başarısız",inQueue:"kuyrukta",noPrintsYet:"Henüz baskı yok",printJobs:"Baskı işleri (plakalar)",partsPrinted:"Yazdırılan parçalar",failedParts:"Başarısız parçalar",import:"İçe Aktar",export:"Dışa Aktar",importProject:"Projeyi içe aktar",exportAll:"Tüm projeleri dışa aktar",loading:"Projeler yükleniyor...",noEditPermission:"Projeleri düzenleme izniniz yok",noDeletePermission:"Projeleri silme izniniz yok",noCreatePermission:"Proje oluşturma izniniz yok",noImportPermission:"Projeleri içe aktarma izniniz yok",noExportPermission:"Projeleri dışa aktarma izniniz yok",toast:{created:"Proje oluşturuldu",updated:"Proje güncellendi",deleted:"Proje silindi",imported:"Proje içe aktarıldı",multipleImported:"{{count}} proje içe aktarıldı",importFailed:"İçe aktarma başarısız",exported:"Projeler dışa aktarıldı (yalnızca meta veriler)"}},projectDetail:{notFound:"Proje bulunamadı",backToProjects:"Projelere Dön",export:"Dışa Aktar",exportProject:"Projeyi dışa aktar",noExportPermission:"Projeleri dışa aktarma izniniz yok",noEditPermission:"Projeleri düzenleme izniniz yok",partOf:"Şunun parçası:",priorityLabel:"Öncelik:",noPrints:"Bu projede henüz baskı yok",status:{active:"Aktif",completed:"Tamamlandı",archived:"Arşivlendi"},priority:{low:"Düşük",normal:"Normal",high:"Yüksek",urgent:"Acil"},dueDate:{overdue:"Gecikmiş",today:"Bugün teslim",daysLeft:"{{count}} gün kaldı"},progress:{platesProgress:"Plaka İlerlemesi",partsProgress:"Parça İlerlemesi",printJobs:"baskı işi",parts:"parça",percentComplete:"%{{percent}} tamamlandı",remaining:"{{count}} kaldı"},stats:{printJobs:"Baskı İşleri",total:"toplam",failed:"{{count}} başarısız",partsPrinted:"{{count}} parça yazdırıldı",printTime:"Baskı Süresi",filamentUsed:"Kullanılan Filament"},cost:{title:"Maliyet Takibi",filamentCost:"Filament Maliyeti",energy:"Enerji",totalCost:"Toplam Maliyet",total:"Toplam",includesBom:"BOM dahil",budget:"Bütçe",remaining:"Kalan"},subProjects:{title:"Alt projeler ({{count}})"},notes:{title:"Notlar",noEditPermission:"Notları düzenleme izniniz yok",placeholder:"Bu proje hakkında notlar ekleyin...",empty:"Henüz not yok. Not eklemek için Düzenle'ye tıklayın."},files:{title:"Dosyalar",linkFolders:"Dosya Yöneticisinden klasörleri bağla",forQuickAccess:"hızlı erişim için bu projeye.",fileCount:"{{count}} dosya",empty:"Bağlı klasör yok. Dosya Yöneticisine gidin ve bu projeye bir klasör bağlayın.",noFiles:"Bu klasörde dosya yok.",print:"Şimdi Yazdır",addToQueue:"Kuyruğa Ekle"},bom:{title:"Malzeme Listesi",acquired:"{{completed}}/{{total}} edinildi",showAll:"Tümünü göster",hideDone:"Tamamlananları gizle",addPart:"Parça Ekle",noAddPermission:"Parça ekleme izniniz yok",partNamePlaceholder:"Parça adı (örn., M3x8 vidalar)",partName:"Parça adı",qty:"Adet",price:"Fiyat ({{currency}})",sourcingUrlPlaceholder:"Kaynak URL'si (isteğe bağlı)",remarksPlaceholder:"Notlar (isteğe bağlı)",deletePart:"Parçayı Sil",deleteConfirm:'"{{name}}" silmek istediğinizden emin misiniz?',noUpdatePermission:"Parçaları güncelleme izniniz yok",noEditPermission:"Parçaları düzenleme izniniz yok",noDeletePermission:"Parçaları silme izniniz yok",totalCost:"Toplam maliyet:",empty:"Malzeme listesinde parça yok. Nelerin tedarik edilmesi gerektiğini takip etmek için donanım, elektronik veya diğer bileşenler ekleyin."},timeline:{title:"Etkinlik Zaman Çizelgesi",empty:"Henüz etkinlik yok."},template:{saveAsTemplate:"Şablon Olarak Kaydet",noCreatePermission:"Şablon oluşturma izniniz yok"},queue:{title:"Kuyruk",viewAll:"Tümünü görüntüle",printing:"{{count}} yazdırılıyor",queued:"{{count}} kuyrukta"},prints:{title:"Baskılar ({{count}})"},toast:{projectUpdated:"Proje güncellendi",partAdded:"Parça eklendi",partRemoved:"Parça kaldırıldı",exportFailed:"Dışa aktarma başarısız",projectExported:"Proje dışa aktarıldı",templateCreated:"Şablon oluşturuldu"}},system:{title:"Sistem Bilgisi",version:"Sürüm",uptime:"Çalışma Süresi",cpuUsage:"CPU Kullanımı",memoryUsage:"Bellek Kullanımı",diskUsage:"Disk Kullanımı",networkInfo:"Ağ Bilgisi",logs:"Günlükler",debugMode:"Hata Ayıklama Modu",enableDebug:"Hata Ayıklama Kaydını Etkinleştir",disableDebug:"Hata Ayıklama Kaydını Devre Dışı Bırak",downloadLogs:"Günlükleri İndir",clearLogs:"Günlükleri Temizle",dockerInfo:"Docker Bilgisi",containerName:"Konteyner Adı",imageName:"İmaj Adı",platform:"Platform",architecture:"Mimari"},library:{title:"Filament Kütüphanesi",addFilament:"Filament Ekle",editFilament:"Filamenti Düzenle",deleteFilament:"Filamenti Sil",vendor:"Satıcı",material:"Malzeme",color:"Renk",kFactor:"K Faktörü",temperature:"Sıcaklık",noFilaments:"Kütüphanede filament yok",deleteConfirm:"Bu filamenti silmek istediğinizden emin misiniz?",importFromPrinter:"Yazıcıdan İçe Aktar",exportToFile:"Dosyaya Dışa Aktar"},slice:{title:"Modeli dilimle",action:"Dilimle",actionAll:"Tüm {{count}} plakayı dilimle",actionAllTitle:"Her plakayı tek bir çok plakalı çıktıya dilimle (tek arşiv). Filament seçimi projenin tanımladığı her yuvayı kapsar.",allPlatesToggle:"Tüm {{count}} plakayı dilimle",slicing:"Dilimleniyor…",printer:"Yazıcı profili",process:"İşlem profili",filament:"Filament profili",filamentSlot:"Filament {{index}} ({{type}})",selectPreset:"— Bir ön ayar seçin —",loadingPresets:"Ön ayarlar yükleniyor…",analyzingPlateFilaments:"Plaka filamentleri analiz ediliyor…",analyzingPlateFilamentsHint:"Bu plakanın hangi AMS yuvalarını kullandığını keşfetmek için bir önizleme dilimleme çalıştırılıyor. Sonradan önbelleğe alınır — yeniden açma anlıktır.",previewToast:"{{name}} analiz ediliyor — {{elapsed}}",previewWithProgress:"{{name}} analiz ediliyor — {{stage}} (%{{percent}}) — {{elapsed}}",notUsedByPlate:"— bu plaka tarafından kullanılmıyor",noPresetsForSlot:"Kullanılabilir ön ayar yok",otherPrinters:"Diğer yazıcılar",presetsLoadFailed:"Ön ayarlar yüklenemedi. Önce içe aktarmak için Ayarlar → Profiller'i açın.",refreshPresets:"Yenile",refreshPresetsTitle:"Ön ayarları yenile — en güncel bulut ve paketli listeleri getir (Bambu Studio veya Bambu Handy'de bir ön ayar sildikten sonra kullanın)",allPresetsRequired:"Tüm ön ayarlar seçilmelidir",bundle:"Dilimleyici paketi",bundleNone:"— Hiçbiri (ön ayarları ayrı ayrı seçin) —",bundleAllRequired:"Paket işlemi ve her filament yuvası seçilmelidir",enqueuing:"Dilimleme işi gönderiliyor…",queued:"Kuyrukta…",failed:"Dilimleme başarısız. Dilimleyici yardımcı bileşen günlüklerini kontrol edin.",startedToast:"{{name}} arka planda dilimleniyor…",queuedToast:"Kuyrukta: {{name}} — {{elapsed}}",runningToast:"{{name}} dilimleniyor — {{elapsed}}",runningWithProgress:"{{name}} — {{stage}} (%{{percent}}) — {{elapsed}}",runningWithProgressMultiPlate:"{{plateCount}}/{{plateIndex}} plaka • {{name}} — {{stage}} (%{{percent}}) — {{elapsed}}",completedToast:"{{name}} dilimlendi",failedTitle:"Dilimleme başarısız",failedToast:"{{name}} dilimleme başarısız: {{detail}}",tier:{local:"İçe aktarılmış",cloud:"Bambu Cloud",orcaCloud:"Orca Cloud",standard:"Standart"},cloud:{notAuthenticated:"Bulut ön ayarlarınızı görmek için Bambu Cloud'a giriş yapın (Ayarlar → Profiller → Bambu Cloud).",expired:"Bambu Cloud oturumu süresi doldu — bulut ön ayarlarınızı yenilemek için tekrar giriş yapın.",unreachable:"Bambu Cloud şu anda erişilemez. Yerel ve standart ön ayarlar hâlâ çalışıyor."},orcaCloud:{notAuthenticated:"Orca ön ayarlarınızı görmek için Orca Cloud'a giriş yapın (Profiller → Orca Cloud).",expired:"Orca Cloud oturumu sona erdi — Orca ön ayarlarınızı yenilemek için tekrar giriş yapın.",unreachable:"Orca Cloud şu anda erişilemez. Diğer ön ayarlar çalışmaya devam ediyor."},bedType:{label:"Baskı plakası",auto:"Otomatik (işlem ön ayarı kullan)",coolPlate:"Soğuk Plaka",coolPlateSuperTack:"Soğuk Plaka SuperTack",engineering:"Mühendislik Plakası",highTemp:"Yüksek Sıcaklık Plakası",texturedPEI:"Dokulu PEI Plakası",smoothPEI:"Düz PEI Plakası"}},spoolman:{title:"Spoolman Entegrasyonu",enabled:"Spoolman Etkin",url:"Spoolman URL",connected:"Bağlı",disconnected:"Bağlı Değil",testConnection:"Bağlantıyı Test Et",sync:"Senkronize Et",syncing:"Senkronize ediliyor...",lastSync:"Son Senkronizasyon",linkToSpoolman:"Spoolman'a Bağla",openInSpoolman:"Spoolman'da Aç",unlinkSpool:"Makara Bağlantısını Kaldır",unlinkConfirmTitle:"Makara Atamasını Kaldır?",unlinkConfirmMessage:"Bu, makarayı bu yuvadan kaldıracak. Makara verisinin kendisi değişmeyecek.",selectSpool:"Makara Seç",noUnlinkedSpools:"Atanmamış makara yok",linkSuccess:"Makara başarıyla atandı",linkFailed:"Makara atanamadı",unlinkSuccess:"Makara ataması başarıyla kaldırıldı",unlinkFailed:"Makara ataması kaldırılamadı",linkedSpool:"Atanan makara",spoolId:"Makara ID",fillSourceLabel:"(Spoolman)",weight:"Ağırlık",remaining:"Kalan",disableWeightSync:"AMS Tahmini Ağırlık Senkronizasyonunu Devre Dışı Bırak",disableWeightSyncDesc:"AMS tahminlerinden kalan kapasiteyi güncelleme. AMS yüzde tabanlı tahminler yerine Spoolman'ın kullanım takibini tercih ediyorsanız bunu kullanın. Yeni makaralar yine de başlangıç ağırlığı olarak AMS tahminini kullanacak.",reportPartialUsage:"Başarısız Baskılar için Kısmi Kullanımı Bildir",reportPartialUsageDesc:"Bir baskı başarısız olduğunda veya iptal edildiğinde, katman ilerlemesine göre o noktaya kadar kullanılan tahmini filamenti bildir."},inventory:{title:"Makara Envanteri",subtitle:"Makaralarınızı yönetin",spoolmanMixedContentTitle:"Spoolman HTTPS üzerinden yüklenemiyor — tarayıcınız tarafından karışık içerik engellendi",spoolmanMixedContentBody:"Bambuddy HTTPS üzerinden sunuluyor (ters proxy'niz aracılığıyla), ancak Spoolman URL'niz hâlâ düz HTTP. Tarayıcılar güvenlik için karışık içeriği engeller, bu nedenle gömülü Spoolman arayüzü oluşturulamaz. Bunun çalışması için Spoolman'in HTTPS üzerinden erişilebilir olması gerekiyor.",spoolmanMixedContentFixReverseProxy:"Spoolman'i Bambuddy ile aynı ters proxy'nin (Traefik / Nginx / Caddy) arkasına HTTPS ile koyun, ardından Ayarlardaki Spoolman URL'sini yeni HTTPS adresine güncelleyin.",spoolmanMixedContentFixOpenNewTab:"Geçici bir çözüm olarak, Spoolman'i HTTP üzerinden yeni bir tarayıcı sekmesinde açın — karışık içerik kuralları yalnızca gömülü çerçevelere uygulanır, bu nedenle bağımsız bir sekme yine çalışır.",spoolmanOpenInNewTab:"Spoolman'i yeni sekmede aç",labels:{title:"Makara etiketleri yazdır",selectedCount:"{{count}} seçildi",pickSpools:"Hangi makaralar için etiket yazdırılacağını seçin:",searchPlaceholder:"Ad, marka veya #ID ara",filterByMaterial:"Malzeme:",allMaterials:"Tümü",selectVisible:"Görünen tümünü seç ({{count}})",deselectVisible:"Görünenleri seçimden kaldır",clearAll:"Tümünü temizle",noSpoolsToShow:"Gösterilecek makara yok. Filtrenizi ayarlayın ve tekrar deneyin.",noMatches:"Mevcut arama veya filtreyle eşleşen makara yok.",printOne:"Bu makara için etiket yazdır",printLabels:"Etiketleri yazdır…",bulkTitle:"Şu anda gösterilen {{count}} makaradan etiket yazdırılacak olanları seçin",noSpoolsTitle:"Etiketlenecek makara yok",error:"Etiketler oluşturulamadı: {{msg}}",sortBy:{label:"Sırala:",id:"ID'ye göre",color:"Renge göre"},templates:{amsHolderSmall:{label:"AMS tutucu — küçük (74 × 33 mm)",hint:"Sayfa başına tek etiket; MakerWorld model 752566 (AMS Filament Etiket Tutucu) yazdırılabilir etiketle eşleşir."},amsHolderLarge:{label:"AMS tutucu — büyük (75 × 55 mm)",hint:"Sayfa başına tek etiket; AMS Filament Etiket Tutucu'nun karton uçlu varyantına uyar. Numune, marka, malzeme, ID ve QR kod için yeterli yer."},box40x30:{label:"Kutu etiketi (40 × 30 mm)",hint:"Sayfa başına tek etiket; yaygın DK/Brother rulo boyutu, filament torbası ve depolama kutusu etiketleri için iyi."},box:{label:"Kutu etiketi (62 × 29 mm)",hint:"Sayfa başına tek etiket; Brother PT/QL ve Dymo küçük etiketleri için boyutlandırılmış."},averyL7160:{label:"Avery L7160 — A4 sayfa (38.1 × 63.5 mm × 21)",hint:"AB sayfa stoğu; A4 sayfa başına 21 etiket."},avery5160:{label:"Avery 5160 — US Letter sayfa (25.4 × 66.7 mm × 30)",hint:"ABD sayfa stoğu; Letter sayfası başına 30 etiket."}}},addSpool:"Makara Ekle",editSpool:"Makarayı Düzenle",copySpool:"Makarayı Kopyala",material:"Malzeme",selectMaterial:"Malzeme seç...",subtype:"Alt tür",brand:"Marka",searchBrand:"Marka ara...",useCustomBrand:'"{{brand}}" kullan',useCustomMaterial:"Özel malzeme kullan: {{material}}",colorName:"Renk Adı",colorNamePlaceholder:"Yeşim Beyazı, Ateş Kırmızısı...",color:"Renk",hexColor:"Hex Renk",pickColor:"Özel renk seç",labelWeight:"Etiket Ağırlığı",coreWeight:"Boş Makara Ağırlığı",searchSpoolWeight:"Makara ağırlığı ara...",weightUsed:"Kullanılan",currentWeight:"Kalan Ağırlık",measuredWeight:"Ölçülen Ağırlık",spoolName:"Makara",costPerKg:"kg başına maliyet",storageLocation:"Depolama Konumu",storageLocationPlaceholder:"örn. Raf A, Çekmece 1",openInInventory:"Envanterde Aç",measuredWeightError:"Ölçülen ağırlık {{min}}g ile {{max}}g arasında olmalı.",slicerFilament:"Dilimleyici Filamenti",slicerFilamentName:"Dilimleyici Ön Ayar Adı",slicerPreset:"Dilimleyici Ön Ayarı",searchPresets:"Filament ön ayarlarında ara...",selectedPreset:"Seçildi",noPresetsFound:"Ön ayar bulunamadı",tempOverrides:"Sıcaklık Geçersiz Kılmaları",note:"Not",notePlaceholder:"Bu makara hakkında ek notlar...",category:"Kategori",categoryPlaceholder:"örn. Üretim, Prototip, Müşteri A",categoryNone:"Kategorisiz",storageLocationNone:"Konum ayarlanmamış",lowStockThresholdOverride:"Düşük stok eşiği (bu makara)",lowStockThresholdOverrideHelp:"Global eşiği kullanmak için boş bırakın (%{{global}}).",clearRfid:"RFID Etiketini Temizle",rfidCleared:"RFID etiketi temizlendi",archive:"Arşivle",restore:"Geri Yükle",noSpools:"Henüz makara yok. Başlamak için ilk makaranızı ekleyin.",noAvailableSpools:"Kullanılabilir makara yok. Envanterinize bir makara ekleyin veya önce başka bir yuvadan atamayı kaldırın.",kProfiles:"K-Profilleri",addKProfile:"K-Profili Ekle",assignSpool:"Makara Ata",unassignSpool:"Atamayı Kaldır",assignSuccess:"Makara atandı ve AMS yuvası yapılandırıldı",assignFailed:"Makara atanamadı",selectSpool:"Bu yuvaya atamak için bir makara seçin",assigned:"Atandı",assigning:"Atanıyor...",searchSpools:"Makaralarda ara...",showAllSpools:"Tüm makaraları göster",spoolmanSpools:"Spoolman Makaraları",allMaterials:"Tüm Malzemeler",filterByBrand:"Markaya göre filtrele...",showArchived:"Arşivlenmişleri göster",quickAdd:"Hızlı Ekle (Stok)",quantity:"Miktar",stock:"Stok",configured:"Yapılandırıldı",spoolsCreated:"{{count}} makara oluşturuldu",spoolsPartiallyCreated:"{{total}} makaradan {{created}} tanesi oluşturuldu (bazıları başarısız)",spoolCreated:"Makara oluşturuldu",spoolUpdated:"Makara güncellendi",spoolDeleted:"Makara silindi",deepLinkSpoolNotFound:"Makara bulunamadı",deepLinkFetchFailed:"Makara yüklenemedi — tekrar deneyin",spoolArchived:"Makara arşivlendi",spoolRestored:"Makara geri yüklendi",kProfileSaveFailed:"K-profili ayarları kaydedilemedi",syncWeightSpoolNotFound:"Makara bulunamadı — silinmiş olabilir",syncWeightSpoolmanUnreachable:"Spoolman'a erişilemiyor — daha sonra tekrar deneyin",syncWeightFailed:"Ağırlık senkronize edilemedi",spoolmanUnreachable:"Spoolman erişilebilir değil — lütfen daha sonra tekrar deneyin",deleteSpoolNotFound:"Makara bulunamadı — zaten silinmiş olabilir",deleteFailed:"Makara silinemedi",archiveSpoolNotFound:"Makara bulunamadı — zaten silinmiş olabilir",archiveFailed:"Makara arşivlenemedi",restoreSpoolNotFound:"Makara bulunamadı — zaten silinmiş olabilir",restoreFailed:"Makara geri yüklenemedi",saveFailed:"Değişiklikler kaydedilemedi",tagClearFailed:"Etiket temizlenemedi",deleteConfirm:"Bu makarayı silmek istediğinizden emin misiniz? Bu geri alınamaz.",archiveConfirm:"Bu makarayı arşivlemek istediğinizden emin misiniz?",advancedSettings:"Gelişmiş Ayarlar",filamentInfoTab:"Filament Bilgisi",paProfileTab:"PA Profili",filamentInfo:"Filament",additional:"Ek",loadingPresets:"Bulut ön ayarları yükleniyor...",cloudConnected:"Bulut bağlı",cloudNotConnected:"Bulut bağlı değil (varsayılanlar kullanılıyor)",recentColors:"Son Kullanılan",searchColors:"Renklerde ara...",searchResults:"Arama sonuçları",allColors:"Tüm renkler",commonColors:"Yaygın renkler",showLess:"Daha az göster",showAll:"Tümünü göster",noColorsFound:"Aramanızla eşleşen renk yok",noResults:"Eşleşme bulunamadı",extraColorsLabel:"Ekstra renkler",extraColorsPlaceholder:"EC984C,#6CD4BC,A66EB9,D87694",extraColorsHint:"Virgülle ayrılmış 2 ile 8 arası hex durağı yapıştırın. Bir gradyan olarak görüntülenir.",extraColorsInvalid:"Geçersiz hex yok sayıldı: {{tokens}}",colorEffectLabel:"Efekt",colorEffect:{none:"Yok",sparkle:"Parıltı",wood:"Ahşap",marble:"Mermer",glow:"Parlama",matte:"Mat",silk:"İpek",galaxy:"Galaksi",rainbow:"Gökkuşağı",metal:"Metal",translucent:"Yarı saydam",gradient:"Gradyan",dualColor:"Çift Renk",triColor:"Üç Renk",multicolor:"Çok Renkli"},selectMaterialFirst:"Lütfen önce Filament Bilgisi sekmesinde bir malzeme seçin.",noPrintersConfigured:"Yapılandırılmış yazıcı yok. PA profillerini kullanmak için yazıcı ekleyin.",matchingFilter:"Eşleşen",anyBrand:"Herhangi marka",anyVariant:"Herhangi varyant",autoSelect:"Otomatik seç",matches:"eşleşme",match:"eşleşme",noMatches:"Eşleşme yok",connected:"Bağlı",offline:"Çevrimdışı",printerOffline:"Yazıcı çevrimdışı. Kalibrasyon profillerini görüntülemek için bağlanın.",noKProfilesMatch:"Seçilen filamentle eşleşen K-profili yok.",leftNozzle:"Sol Nozul",rightNozzle:"Sağ Nozul",profilesSelected:"kalibrasyon profili seçildi",totalInventory:"Toplam Envanter",totalConsumed:"Toplam Tüketim",byMaterial:"Malzemeye Göre",inPrinter:"Yazıcıda",lowStock:"Düşük Stok",sinceTracking:"Takip başladığından beri",resetConsumedCounter:"Sayacı sıfırla",resetConsumedCounterTooltip:"Bu makara için tüketilen gram sayacını sıfırla. Kalan ağırlık değişmez.",resetConsumedCounterConfirm:"Bu makaranın tüketilen gram sayacı 0'a sıfırlansın mı? Gelecekteki baskılar sıfırdan tekrar takip edilecek. Makaranın kendisi, kalan ağırlık hesaplaması ve ayarlarınız değiştirilmez.",resetAllConsumedCounters:"Tüm sayaçları sıfırla",resetAllConsumedCountersTooltip:"Her makarada tüketilen gram sayacını sıfırla. Kalan ağırlıklar değişmez.",resetAllConsumedCountersConfirm:`Tüm {{count}} makaradaki (arşivlenmişler dahil) tüketilen gram sayacı 0'a sıfırlansın mı? Bu, "Toplam Tüketim" istatistiğini temizler, böylece gelecekteki baskılar sıfırdan takip edilir. Makaralar ve kalan ağırlıklar değiştirilmez.`,consumedCounterReset:"Sayaç sıfırlandı",allConsumedCountersReset:"{{count}} makaranın sayacı sıfırlandı",resetConsumedCounterFailed:"Sayaç sıfırlanamadı",loadedInAms:"AMS/Ext'te Yüklü",remaining:"Kalan",weightCheck:"Ağırlık Kontrolü",lastWeighed:"Son tartım",neverWeighed:"Hiç tartılmadı",search:"Makaralarda ara...",showing:"Gösterilen",to:"-",of:"/",show:"Göster",spools:"makara",spool:"makara",page:"Sayfa",noSpoolsMatch:"Sonuç bulunamadı",noSpoolsMatchDesc:"Aradığınızı bulmak için aramanızı veya filtrelerinizi ayarlamayı deneyin.",active:"Aktif",archived:"Arşivlendi",all:"Tümü",used:"Kullanılmış",new:"Yeni",clearFilters:"Filtreleri temizle",table:"Tablo",cards:"Kartlar",net:"Net",groupSimilar:"Grupla",groupedSpools:"{{count}} aynı makara",groupedRows:"satır",columns:"Sütunlar",configureColumns:"Sütunları Yapılandır",configureColumnsDesc:"Sütunları yeniden sıralamak için sürükleyin veya okları kullanın. Göz simgesiyle görünürlüğü değiştirin.",visible:"görünür",reset:"Sıfırla",cancel:"İptal",applyChanges:"Değişiklikleri Uygula",moveUp:"Yukarı taşı",moveDown:"Aşağı taşı",hideColumn:"Sütunu gizle",showColumn:"Sütunu göster",linkToSpool:"Makaraya Bağla",tagLinked:"Etiket makaraya bağlandı",tagLinkFailed:"Etiket bağlanamadı",tagAlreadyLinked:"Etiket zaten başka bir makaraya bağlı",unknownTag:"Bilinmeyen RFID etiketi algılandı",usageHistory:"Kullanım Geçmişi",noUsageHistory:"Henüz kullanım kaydedilmedi",printName:"Baskı Adı",weightConsumed:"Tüketilen Ağırlık",clearHistory:"Temizle",historyCleared:"Kullanım geçmişi temizlendi",fillSourceLabel:"(Env)",lowStockThresholdError:"Eşik 0.1 ile 99.9 arasında olmalı",assignMismatchTitle:"Malzeme uyumsuzluğu",assignMismatchMessage:'Seçilen makara malzemesi "{{spoolMaterial}}", {{location}} için tepsi malzemesi "{{trayMaterial}}" ile eşleşmiyor. Yine de atansın mı?',assignMismatchConfirm:"Yine de Ata",assignPartialMismatchMessage:'Makara malzemesi "{{spoolMaterial}}", {{location}} konumundaki "{{trayMaterial}}" ile benzer ancak tam olarak eşleşmiyor. Devam etmek istiyor musunuz?',assignProfileMismatchMessage:'Makara profili "{{spoolProfile}}", {{location}} konumundaki tepsi profili "{{trayProfile}}" ile eşleşmiyor. Devam etmek istiyor musunuz?',assignReconfigureNote:"AMS yuvası, makaranın profilini kullanacak şekilde yeniden yapılandırılacak.",spoolmanFilamentCatalog:"Spoolman Filament Kataloğu",pickFromSpoolmanCatalog:"Spoolman kataloğundan seç…",spoolmanFilamentSelected:"Filament Spoolman kataloğundan seçildi",spoolmanFilamentUnlinked:"Filament katalog bağlantısı temizlendi",noSpoolmanFilaments:"Spoolman kataloğunda filament bulunamadı",spoolmanFilamentColorSwatch:"Filament rengi",spoolWeightManagedBySpoolman:"Boş makara ağırlığı Spoolman'de filament türü başına yönetilir",spoolmanCatalogLoadFailed:"Spoolman filament kataloğu yüklenemedi"},timelapse:{title:"Zaman Atlamalı Video",create:"Zaman Atlamalı Video Oluştur",download:"İndir",delete:"Sil",preview:"Önizleme",frameRate:"Kare Hızı",quality:"Kalite",processing:"İşleniyor...",noTimelapses:"Kullanılabilir zaman atlamalı video yok"},ams:{title:"AMS",slot:"Yuva",empty:"Boş",emptySlot:"Boş yuva",slotEmpty:"Boş",emptySlotReset:"Atanmış filament yok",unknown:"Bilinmiyor",humidity:"Nem",temperature:"Sıcaklık",filamentType:"Filament Türü",filamentColor:"Renk",remaining:"Kalan",history:"AMS Geçmişi",noHistory:"Geçmiş mevcut değil",configureSlot:"Yuvayı Yapılandır",externalSpool:"Harici Makara",profile:"Profil",kFactor:"K Faktörü",fill:"Doldur",configure:"Yapılandır",used:"kullanılan",remainingUnit:"kalan"},printModal:{title:"Baskıyı Başlat",selectPrinter:"Yazıcı Seç",selectPlate:"Plaka Seç",filamentMapping:"Filament Eşlemesi",totalCost:"Toplam maliyet:",slotRemainingShort:" - {{grams}}g kaldı",printSettings:"Baskı Ayarları",bedLeveling:"Tabla Seviyelendirme",flowCalibration:"Akış Kalibrasyonu",vibrationCalibration:"Titreşim Kalibrasyonu",layerInspection:"İlk Katman Denetimi",timelapse:"Zaman Atlamalı Video",startPrint:"Baskıyı Başlat",addToQueue:"Kuyruğa Ekle",cancel:"İptal",noPrintersAvailable:"Kullanılabilir yazıcı yok",printerBusy:"Yazıcı meşgul",printerOffline:"Yazıcı çevrimdışı",sameTypeDifferentColor:"Aynı tür, farklı renk",filamentTypeNotLoaded:"Filament türü yüklenmedi",openCalendar:"Takvimi aç",leftNozzle:"S",rightNozzle:"R",leftNozzleTooltip:"Sol nozul",rightNozzleTooltip:"Sağ nozul",filamentOverride:"Filament Geçersiz Kılma",filamentOverrideHint:"Model tabanlı atama için isteğe bağlı olarak filamentleri geçersiz kıl. Planlayıcı, orijinal 3MF değerleri yerine seçtiğiniz filamentlere göre eşleşecek.",originalFilament:"Orijinal",overrideWith:"Şununla geçersiz kıl",resetToOriginal:"Orijinale sıfırla",insufficientFilamentTitle:"Yeterli filament yok",insufficientFilamentMessage:"Bazı atanmış makaralarda bu baskının ihtiyaç duyduğundan daha az filament kaldı:",insufficientFilamentLine:"{{printer}} - {{slot}}: {{required}}g gerekli, {{remaining}}g kaldı",printAnyway:"Yine de yazdır",forceColorMatch:"Renk eşleşmesini zorla",staggerPrinterStarts:"Yazıcı başlangıçlarını kademelendir",staggerGroupSize:"Grup boyutu",staggerInterval:"Aralık (dk)",staggerPreview:"{{printers}} yazıcı → {{size}} kişilik {{groups}} grup, her {{interval}} dk'da bir başlatılıyor",staggerLastGroup:"son grup: {{count}}",staggerTotal:"toplam: {{minutes}} dk",staggerToPrinters:"{{count}} yazıcıya kademelendir",gcodeInjection:"Otomatik baskı G-kodu enjekte et"},backup:{includesEncryptionKey:"Yerel yedekler, yedek ZIP'nin kendi içinde tamamlanmış olması için MFA şifreleme anahtarı dosyasını (DATA_DIR/.mfa_encryption_key) içerir. ZIP'yi hassas olarak değerlendirin — dosyaya sahip olan herkes içinde saklanan OIDC istemci gizli anahtarlarını ve TOTP gizli anahtarlarını çözebilir.",title:"Yedekleme ve Geri Yükleme",createBackup:"Yedek Oluştur",restoreBackup:"Yedeği Geri Yükle",restoreDescription:"Tüm verileri bir yedek dosyasından değiştir",downloadBackup:"Yedeği İndir",uploadBackup:"Yedek Yükle",lastBackup:"Son Yedek",autoBackup:"Otomatik Yedekleme",backupNow:"Şimdi Yedekle",restoreWarning:"Uyarı: Bir yedeği geri yüklemek tüm mevcut verilerin üzerine yazacak.",includeArchives:"Arşivleri Dahil Et",includeSettings:"Ayarları Dahil Et",includeProfiles:"Profilleri Dahil Et",backupSuccess:"Yedek başarıyla oluşturuldu",restoreSuccess:"Yedek başarıyla geri yüklendi",backupFailed:"Yedekleme başarısız",restoreFailed:"Geri yükleme başarısız",restoreNote:"Geri yükleme sırasında Sanal Yazıcı durdurulacak",githubBackup:"Git Yedekleme",enabled:"Etkin",cloudLoginRequired:"Bambu Cloud girişi gerekli. GitHub yedeklemesini etkinleştirmek için Profiller → Bulut Profilleri altında giriş yapın.",cloudLoginRequiredShort:"Bulut girişi gerekli",githubDescription:"Yedekleme ve sürüm geçmişi için profillerinizi otomatik olarak özel bir GitHub deposuna senkronize et.",repoIsPrivate:"Depo özel — yedeklemek için güvenli.",repoIsPublicWarning:"Depo HERKESE AÇIK. Bambuddy yedekleri MQTT kimlik bilgilerini, Home Assistant belirteçlerini, Prometheus belirteçlerini, Bambu Cloud e-postanızı ve K-profilleri aracılığıyla yazıcı erişim kodlarını içerir. Sağlayıcınızın ayarlarında depoyu özel hale getirene kadar kaydetme engellenir.",repoVisibilityUnknown:"Depo görünürlüğü belirlenemedi. Bambuddy, özel olarak onaylanmamış hiçbir şeye yedekleme yapmayı reddeder; kaydetme engellenecek.",repositoryUrl:"Depo URL'si",repoUrlPlaceholderGitHub:"https://github.com/username/repo-name",repoUrlPlaceholderGitea:"https://gitea.example.com/username/repo-name",repoUrlPlaceholderForgejo:"https://forgejo.example.com/username/repo-name",repoUrlPlaceholderGitLab:"https://gitlab.com/username/repo-name",allowInsecureHttp:"Güvensiz HTTP'ye izin ver",allowInsecureHttpHint:"TLS olmadan özel ağlarda kendi barındırılan örnekler için etkinleştir",personalAccessToken:"Kişisel Erişim Belirteci",tokenSaved:"(kaydedildi)",enterNewToken:"Güncellemek için yeni belirteç girin",tokenHint:"Contents okuma/yazma izni olan ayrıntılı belirteç",branch:"Dal",provider:"Git Sağlayıcısı",providerGitHub:"GitHub",providerGitLab:"GitLab",providerGitea:"Gitea",providerForgejo:"Forgejo",manualOnly:"Yalnızca manuel",hourly:"Saatlik",daily:"Günlük",weekly:"Haftalık",includeInBackup:"Yedeğe dahil et",kProfiles:"K-Profilleri",kProfilesDescription:"Bağlı yazıcılardan basınç ilerleme kalibrasyonu",noPrintersConnected:"Bağlı yazıcı yok",printersConnected:"{{connected}}/{{total}} bağlı",cloudProfiles:"Bulut Profilleri",cloudProfilesDescription:"Bambu Cloud'dan filament, yazıcı ve işlem ön ayarları",appSettings:"Uygulama Ayarları",appSettingsDescription:"Bambuddy yapılandırması (tam veritabanı)",spoolInventory:"Makara Envanteri",spoolInventoryDescription:"Filament makaraları, kullanım geçmişi ve maliyet takibi",printArchives:"Baskı Arşivleri",printArchivesDescription:"Baskı geçmişi meta verileri (gcode/3MF dosyaları yok)",lastBackupAt:"Son yedek:",noBackupsYet:"Henüz yedek yok",next:"Sonraki:",startingBackup:"Yedekleme başlatılıyor...",test:"Test",enableBackup:"Yedeklemeyi Etkinleştir",testConnection:"Bağlantıyı Test Et",enterRepoUrl:"Depo URL'sini girin",enterRepoAndToken:"Depo URL'si ve erişim belirteci girin",repoRequired:"Depo URL'si gerekli",tokenRequired:"Erişim belirteci gerekli",githubBackupEnabled:"GitHub yedeklemesi etkinleştirildi",tokenUpdated:"Belirteç güncellendi",settingsSaved:"Ayarlar kaydedildi",failedToSave:"Kaydedilemedi: {{message}}",backupCompleteFiles:"Yedekleme tamamlandı - {{count}} dosya güncellendi",backupSkippedNoChanges:"Yedekleme atlandı - değişiklik yok",backupFailed2:"Yedekleme başarısız: {{message}}",clearedLogs:"{{count}} günlük temizlendi",failedToClearLogs:"Günlükler temizlenemedi: {{message}}",history:"Geçmiş",clear:"Temizle",date:"Tarih",status:"Durum",commit:"Commit",localBackup:"Yerel Yedekleme",localBackupDescription:"Veritabanı, arşivler, yüklemeler ve tüm dosyalar dahil Bambuddy verilerinizin tam bir yedeğini oluşturun.",downloadBackupLabel:"Yedeği İndir",completeBackupZip:"Tam yedek: veritabanı + tüm dosyalar (ZIP)",download:"İndir",preparingBackup:"Yedek hazırlanıyor...",creatingArchive:"Yedek arşivi oluşturuluyor... Büyük arşivler için bu biraz zaman alabilir.",downloadingFile:"Yedek dosyası indiriliyor...",backupDownloaded:"Yedek başarıyla indirildi",failedToCreateBackup:"Yedek oluşturulamadı: {{message}}",restore:"Geri Yükle",restoreReplacesAll:"Geri yükleme tüm verilerin yerine geçer.",restoreReplacesAllDetail:"Mevcut veritabanınız ve dosyalarınız tamamen değiştirilecek. Geri yüklemeden sonra yeniden başlatma gerekli.",restoreConfirmTitle:"Yedeği Geri Yükle",restoreConfirmMessage:'"{{filename}}" dosyasından geri yüklemek istediğinizden emin misiniz? Bu, mevcut veritabanınızı ve tüm dosyaları tamamen değiştirecek. Geri yüklemeden sonra uygulamanın yeniden başlatılması gerekecek.',restoreConfirmButton:"Yedeği Geri Yükle",uploadingFile:"Yedek dosyası yükleniyor...",backupRestoredRestart:"Yedek geri yüklendi. Lütfen Bambuddy'yi yeniden başlatın.",failedToRestore:"Yedek geri yüklenemedi. Lütfen dosya formatını kontrol edin.",reloadNow:"Şimdi Yeniden Yükle",creatingBackup:"Yedek Oluşturuluyor",restoringBackup:"Yedek Geri Yükleniyor",preparing:"Hazırlanıyor...",processing:"İşleniyor...",doNotClosePage:"Lütfen bu sayfayı kapatmayın veya başka bir yere gitmeyin. Büyük yedekler için bu işlem birkaç dakika sürebilir.",restoring:"Geri yükleniyor...",restoreComplete:"Geri Yükleme Tamamlandı",restoreFailed2:"Geri Yükleme Başarısız",importSettings:"Ayarları bir yedek dosyasından içe aktar",pleaseWaitRestoring:"Verileriniz geri yüklenirken lütfen bekleyin",selectBackupFile:"Yedek dosyası seçmek için tıklayın (.json veya .zip)",duplicateHandling:"Yinelenen yönetiminin nasıl çalıştığı:",matchPrinters:"Yazıcılar",matchPrintersBy:"seri numarasına göre eşleşti",matchSmartPlugs:"Akıllı Prizler",matchSmartPlugsBy:"IP adresine göre eşleşti",matchNotificationProviders:"Bildirim Sağlayıcıları",matchNotificationProvidersBy:"ada göre eşleşti",matchFilaments:"Filamentler",matchFilamentsBy:"ad + tür + markaya göre eşleşti",matchArchives:"Arşivler",matchArchivesBy:"içerik hash'ine göre eşleşti (her zaman atlanır)",matchPendingUploads:"Bekleyen Yüklemeler",matchPendingUploadsBy:"dosya adına göre eşleşti",matchSettingsTemplates:"Ayarlar ve Şablonlar",matchSettingsTemplatesBy:"her zaman üzerine yazılır",replaceExisting:"Mevcut veriyi değiştir",keepExisting:"Mevcut veriyi koru",overwriteDescription:"Zaten mevcut olan öğeleri yedek verisiyle üzerine yaz",keepDescription:"Yalnızca zaten mevcut olmayan öğeleri geri yükle",overwriteCaution:"Dikkat:",overwriteWarning:"Üzerine yazma, mevcut yapılandırmalarınızı yedekten gelen verilerle değiştirecek. Güvenlik için yazıcı erişim kodları asla üzerine yazılmaz.",cancel:"İptal",processingBackup:"Yedek dosyası işleniyor...",itemsRestored:"Geri Yüklenen Öğeler",itemsSkipped:"Atlanan Öğeler",restored:"Geri yüklendi",skippedAlreadyExist:"Atlandı (zaten mevcut)",filesCategory:"Dosyalar (3MF, küçük resimler, vb.)",andMore:"...ve {{count}} daha",newApiKeysGenerated:"Yeni API Anahtarları Oluşturuldu",keysShownOnce:"Bu anahtarlar yalnızca bir kez gösterilir. Şimdi kopyalayın!",copy:"Kopyala",noDataFound:"Yedek dosyasında geri yüklenecek veri bulunamadı.",close:"Kapat",scheduledBackup:"Zamanlanmış Yedekler",scheduledBackupDescription:"Zamanlamaya göre otomatik olarak yedek anlık görüntüleri oluşturun. Çıktı dizini bir NAS veya harici depolama alanına bağlanabilir.",frequency:"Sıklık",backupTime:"Saat",retention:"Saklama",retentionDescription:"Saklanacak yedek sayısı",outputPath:"Çıktı Yolu",outputPathPlaceholder:"Varsayılan: {{path}}",outputPathDescription:"Varsayılan konum için boş bırakın",runNow:"Şimdi Çalıştır",backupFiles:"Yedek Dosyaları",noScheduledBackups:"Henüz yedek yok",deleteBackup:"Sil",deleteBackupConfirm:"Bu yedek dosyası silinsin mi?",backupRunning:"Yedekleme devam ediyor...",scheduledBackupComplete:"Yedekleme başarıyla tamamlandı",scheduledBackupFailed:"Yedekleme başarısız",nextBackup:"Sonraki yedek",backupSize:"Boyut",localTimeHint:"Yerel saat ({{tz}})",defaultPathLabel:"Varsayılan:",categories:{settings:"Ayarlar",notification_providers:"Bildirim Sağlayıcıları",notification_templates:"Bildirim Şablonları",smart_plugs:"Akıllı Prizler",printers:"Yazıcılar",filaments:"Filamentler",maintenance_types:"Bakım Türleri",archives:"Arşivler",projects:"Projeler",pending_uploads:"Bekleyen Yüklemeler",external_links:"Harici Bağlantılar",api_keys:"API Anahtarları"}},tags:{title:"Etiketler",addTag:"Etiket Ekle",editTag:"Etiketi Düzenle",deleteTag:"Etiketi Sil",tagName:"Etiket Adı",tagColor:"Etiket Rengi",noTags:"Etiket yok",deleteConfirm:"Bu etiketi silmek istediğinizden emin misiniz?",manageTags:"Etiketleri Yönet"},uploadModal:{title:"3MF Dosyalarını Yükle",dragDrop:".3mf dosyalarını buraya sürükleyip bırakın",or:"veya",browseFiles:"Dosyalara Göz At",extractionInfo:"Yazıcı modeli, 3MF dosya meta verilerinden otomatik olarak çıkarılacak.",uploaded:"yüklendi",failed:"başarısız",uploading:"Yükleniyor...",upload:"Yükle",uploadFailed:"Yükleme başarısız"},editArchive:{title:"Arşivi Düzenle",name:"Ad",namePlaceholder:"Baskı adı",printer:"Yazıcı",noPrinter:"Yazıcı yok",project:"Proje",noProject:"Proje yok",itemsPrinted:"Yazdırılan Öğeler",itemsPrintedHelp:"Bu baskı işinde üretilen öğe sayısı",notes:"Notlar",notesPlaceholder:"Bu baskı hakkında notlar ekleyin...",externalLink:"Harici Bağlantı",externalLinkPlaceholder:"https://printables.com/model/...",externalLinkHelp:"Printables, Thingiverse veya başka bir kaynağa bağlantı",tags:"Etiketler",tagsPlaceholder:"Etiketler ekle...",addMoreTags:"Daha fazla etiket ekle...",matchingTags:'"{{query}}" ile eşleşen',existingTags:"Mevcut etiketler",clickToAdd:"(eklemek için tıklayın)",status:"Durum",failureReason:"Başarısızlık Nedeni",selectReason:"Neden seç...",photos:"Yazdırılan Sonuç Fotoğrafları",photosHelp:"Yazdırılan sonuçunuzun fotoğraflarını eklemek için + tıklayın",printResult:"Baskı sonucu",saving:"Kaydediliyor...",failureReasons:{adhesionFailure:"Yapışma başarısız",spaghettiDetached:"Spagetti / Ayrılmış",layerShift:"Katman kayması",cloggedNozzle:"Tıkalı nozul",filamentRunout:"Filament bitti",warping:"Bükülme",stringing:"İplik oluşumu",underExtrusion:"Az ekstrüzyon",powerFailure:"Güç kesintisi",userCancelled:"Kullanıcı iptal etti",other:"Diğer"},statuses:{completed:"Tamamlandı",failed:"Başarısız",aborted:"İptal edildi",printing:"Yazdırılıyor"}},kProfiles:{title:"K-Profilleri",noPrintersConfigured:"Yapılandırılmış Yazıcı Yok",addPrinterInSettings:"K-profillerini yönetmek için Ayarlarda bir yazıcı ekleyin",noActivePrinters:"Aktif Yazıcı Yok",enablePrinterConnection:"K-profillerini görüntülemek için bir yazıcı bağlantısını etkinleştirin",loadingProfiles:"K-Profilleri yükleniyor...",printerOffline:"Yazıcı Çevrimdışı",printerOfflineDesc:"Seçilen yazıcı bağlı değil. K-profillerini görüntülemek için açın.",noMatchingProfiles:"Eşleşen Profil Yok",noMatchingProfilesDesc:"Arama kriterlerinizle eşleşen profil yok",noKProfiles:"K-Profili Yok",noKProfilesDesc:"{{diameter}}mm nozul için basınç ilerleme profili bulunamadı",createFirstProfile:"İlk Profili Oluştur",printer:"Yazıcı",nozzle:"Nozul",refresh:"Yenile",addProfile:"Profil Ekle",export:"Dışa Aktar",import:"İçe Aktar",select:"Seç",selectAll:"Tümünü Seç",delete:"Sil",searchPlaceholder:"Ad veya filamente göre ara...",allExtruders:"Tüm Ekstrüderler",leftOnly:"Yalnızca Sol",rightOnly:"Yalnızca Sağ",allFlow:"Tüm Akış",hfOnly:"Yalnızca HF",sOnly:"Yalnızca S",sortName:"Sırala: Ad",sortKValue:"Sırala: K-Değeri",sortFilament:"Sırala: Filament",leftExtruder:"Sol Ekstrüder",rightExtruder:"Sağ Ekstrüder",modal:{addTitle:"K-Profili Ekle",editTitle:"K-Profilini Düzenle",profileName:"Profil Adı",profileNamePlaceholder:"PLA Profilim",kValue:"K-Değeri",kValuePlaceholder:"0.020",kValueHelp:"Tipik aralık: PLA için 0.01 - 0.06, PETG için 0.02 - 0.10",filament:"Filament",selectFilament:"Filament seç...",noFilamentsHelp:"Filament bulunamadı. Önce Bambu Studio'da bir K-profili oluşturun.",flowType:"Akış Türü",highFlow:"Yüksek Akış",standard:"Standart",nozzleSize:"Nozul Boyutu",extruder:"Ekstrüder",extruders:"Ekstrüderler",left:"Sol",right:"Sağ",notes:"Notlar (yerel olarak saklanır)",notesPlaceholder:"Bu profil hakkında notlar ekleyin...",notesHelp:"Notlar yazıcıda değil, Bambuddy'de kaydedilir",syncing:"Yazıcıyla senkronize ediliyor...",savingExtruder:"Ekstrüdere kaydediliyor {{current}}/{{total}}...",pleaseWait:"Lütfen bekleyin"},deleteConfirm:{title:"Profili Sil",cannotUndo:"Bu geri alınamaz",message:'"{{name}}" yazıcıdan silmek istediğinizden emin misiniz?'},bulkDelete:{title:"Profilleri Sil",cannotUndo:"Bu geri alınamaz",message:"Yazıcıdan seçili {{count}} profili silmek istediğinizden emin misiniz?"},toast:{profileSaved:"K-profili kaydedildi",profilesSaved:"{{count}} ekstrüdere K-profili kaydedildi",selectAtLeastOneExtruder:"Lütfen en az bir ekstrüder seçin",profileDeleted:"K-profili silindi",profilesDeleted:"{{count}} profil silindi",exportedProfiles:"{{count}} profil dışa aktarıldı",importedProfiles:"{{total}} profilden {{count}} tanesi içe aktarıldı",noProfilesToExport:"Dışa aktarılacak profil yok",invalidFileFormat:"Geçersiz dosya formatı",failedToParseImport:"İçe aktarma dosyası ayrıştırılamadı",failedToSaveBatch:"K-profilleri kaydedilemedi",noteSaved:"Not kaydedildi",failedToSaveNote:"Not kaydedilemedi"},permission:{noRead:"Profilleri yenileme izniniz yok",noCreate:"Profil ekleme izniniz yok",noUpdate:"K-profillerini güncelleme izniniz yok",noDelete:"K-profillerini silme izniniz yok",noExport:"Profilleri dışa aktarma izniniz yok",noImport:"Profilleri içe aktarma izniniz yok"}},virtualPrinter:{title:"Sanal Yazıcı",running:"Çalışıyor",stopped:"Durduruldu",description:{default:"Bambu Studio ve OrcaSlicer'da görünen bir sanal yazıcı etkinleştirin. Bu yazıcıya gönderilen dosyalar yazdırılmadan doğrudan arşivlenecek.",proxy:"Dilimleyici trafiğini gerçek bir yazıcıya ileten bir proxy etkinleştirin, böylece herhangi bir ağ üzerinden uzaktan baskı yapabilirsiniz."},enable:{title:"Sanal Yazıcıyı Etkinleştir",visibleInSlicer:'Dilimleyici keşfinde "Bambuddy" olarak görünür',proxyingTo:"{{name}} cihazına proxy yapılıyor",notActive:"Aktif değil"},model:{title:"Yazıcı Modeli",description:"Öykünülecek yazıcı modelini seçin.",restartWarning:"Modeli değiştirmek sanal yazıcıyı yeniden başlatacak"},accessCode:{title:"Erişim Kodu",isSet:"Erişim kodu ayarlandı",notSet:"Erişim kodu ayarlanmadı - etkinleştirmek için gerekli",placeholder:"8 karakterli kodu girin",placeholderChange:"Değiştirmek için yeni kodu girin",hint:"Tam olarak 8 karakter olmalı. Dilimleyiciler tarafından kimlik doğrulama için kullanılır.",charCount:"({{count}}/8)"},targetPrinter:{title:"Hedef Yazıcı",configured:"Proxy hedefi yapılandırıldı",notConfigured:"Hedef yazıcı seçilmedi - proxy modu için gerekli",placeholder:"Bir yazıcı seçin...",hint:"Dilimleyici trafiğine proxy yapmak için yazıcıyı seçin. Yazıcı LAN modunda olmalıdır.",noPrinters:"Yapılandırılmış yazıcı yok. Proxy modunu kullanmak için önce bir yazıcı ekleyin."},remoteInterface:{title:"Ağ Arayüzü Geçersiz Kılma",configured:"Arayüz geçersiz kılma aktif",optional:"İsteğe bağlı - otomatik algılanan IP yanlışsa kullanın (örn. birden fazla NIC, Docker, VPN)",placeholder:"Otomatik algıla (varsayılan)...",hint:"SSDP üzerinden tanıtılan ve TLS sertifikasında kullanılan IP adresini geçersiz kıl. Bambuddy birden fazla ağ arayüzüne sahip olduğunda kullanışlıdır."},mode:{title:"Mod",archive:"Arşiv",archiveDesc:"Dosyaları hemen arşivle",review:"İnceleme",reviewDesc:"Arşivlemeden önce incele",queue:"Kuyruk",queueDesc:"Arşivle ve kuyruğa ekle",proxy:"Proxy",proxyDesc:"Gerçek yazıcıya ilet"},autoDispatch:{title:"Otomatik sevk",description:"Kuyruğa eklendiğinde baskıları otomatik olarak başlat. Kapalıyken, baskılar manuel sevki bekler."},queueForceColorMatch:{title:"Renk eşleşmesini zorla",description:"Tam olarak doğru filament türü ve rengi yüklü olmayan bir yazıcıya sevk etmeyi reddet. Varsayılan olarak kapalı — bu olmadan kuyruk yalnızca model eşleşmesi kullanır ve yanlış renk yüklü bir yazıcı seçebilir."},tailscaleDisabled:{title:"Tailscale entegrasyonu",description:"Bu VP'yi Tailscale üzerinden açıkta olarak işaretlemek için etkinleştirin. Dilimleyiciye hangi IP'yi yapıştıracağınızı bilmeniz için ana bilgisayarın Tailscale adresini gösterir. CA içe aktarma adımı değişmedi — bu anahtarın sertifikalar üzerinde etkisi yoktur."},setupRequired:{title:"Kurulum Gerekli",description:"Sanal yazıcı özelliği çalışmadan önce ek sistem yapılandırması gerektirir. Bu, port yönlendirme, güvenlik duvarı kuralları ve platforma özgü ayarları içerir.",readGuide:"Etkinleştirmeden önce kurulum kılavuzunu okuyun"},archiveNameSource:{title:"Arşiv ad kaynağı",description:`Dosyalar sanal yazıcı aracılığıyla geldiğinde yeni arşivlerin nasıl adlandırılacağını seçin. "Meta veri" 3MF'den dilimleyici-gömülü başlığı kullanır (varsayılan). "Dosya adı" Bambu Studio'nun FTP üzerinden gönderdiği dosya adını kullanır — "yazıcıya gönder" iletişim kutusunda işi yeniden adlandırdıysanız kullanışlıdır.`,metadata:"Meta veri",filename:"Dosya adı"},caCert:{title:"Dilimleyici sertifikası",description:"Sanal yazıcılar Bambuddy CA tarafından imzalanmış bir TLS sertifikası kullanır. Bağlantıyı kabul etmesi için bu CA sertifikasını dilimleyicinizin güven deposuna bir kez içe aktarın — komut satırından kopyalamaya gerek yok.",copy:"Kopyala",copied:"Kopyalandı",download:"İndir",fingerprint:"SHA-256"},howItWorks:{title:"Nasıl çalışır",step1:"Aynı LAN'da, sanal yazıcılar dilimleyicinizde (Bambu Studio / OrcaSlicer) keşif yoluyla otomatik olarak görünür. Diğer ağlardan, IP adresi ve erişim koduyla manuel olarak ekleyin.",step2:`3MF dosyalarını Bambuddy'ye yüklemek için Arşiv, İnceleme ve Kuyruk modlarında dilimleyicinizdeki "Gönder" düğmesini kullanın. Dilimleyici "Baskı başarılı" gösterecek — dosya saklanır, yazdırılmaz.`,step3:"Proxy modunda, sanal yazıcı tüm trafiği gerçek bir yazıcıya iletir — baskılar doğrudan bağlıymış gibi hemen başlar."},status:{title:"Durum Ayrıntıları",printerName:"Yazıcı Adı",model:"Model",serialNumber:"Seri Numarası",mode:"Mod",pendingFiles:"Bekleyen Dosyalar",targetPrinter:"Hedef Yazıcı",ftpPort:"FTP Portu",mqttPort:"MQTT Portu",ftpConnections:"FTP Bağlantıları",mqttConnections:"MQTT Bağlantıları"},toast:{updated:"Sanal yazıcı ayarları güncellendi",failedToUpdate:"Ayarlar güncellenemedi",copyFailed:"Kopyalama başarısız — metni manuel olarak seçmeyi deneyin",accessCodeRequired:"Lütfen önce bir erişim kodu ayarlayın",targetPrinterRequired:"Lütfen önce bir hedef yazıcı seçin",bindIpRequired:"Lütfen önce bir bind IP'si ayarlayın",accessCodeEmpty:"Erişim kodu boş olamaz",accessCodeLength:"Erişim kodu tam olarak 8 karakter olmalı",created:"Sanal yazıcı oluşturuldu",failedToCreate:"Sanal yazıcı oluşturulamadı",deleted:"Sanal yazıcı silindi",failedToDelete:"Sanal yazıcı silinemedi"},list:{title:"Sanal Yazıcılar",add:"Ekle",addFirst:"Sanal Yazıcı Ekle",empty:"Yapılandırılmış sanal yazıcı yok. Başlamak için bir tane ekleyin."},bindIp:{title:"Bind Arayüzü",placeholder:"Arayüz seç...",hint:"Bu sanal yazıcının bağlanacağı ağ arayüzü. Yazıcı başına benzersiz olmalıdır."},proxy:{accessCodeHint:"Proxy modunda, dilimleyicide hedef yazıcınızın erişim kodunu kullanın. Bağlantı şeffaf olarak gerçek yazıcıya iletilir."},addDialog:{title:"Sanal Yazıcı Ekle",name:"Ad",hint:"Oluşturduktan sonra erişim kodunu, hedef yazıcıyı ve diğer ayarları yapılandırabilirsiniz.",create:"Oluştur"},deleteConfirm:{title:"Sanal Yazıcıyı Sil",message:'"{{name}}" silmek istediğinizden emin misiniz? Bu, bu yazıcı için tüm servisleri durduracak.'}},modelViewer:{openInSlicer:"Dilimleyicide Aç",tabs:{model:"3B Model",gcode:"G-kod Önizleme"},notAvailable:"mevcut değil",notSliced:"dilimlenmemiş",plates:"Plakalar",allPlates:"Tüm Plakalar",plateNumber:"Plaka {{number}}",plateCount:"{{count}} plaka",plateCount_other:"{{count}} plaka",objectCount:"{{count}} nesne",objectCount_other:"{{count}} nesne",filamentCount:"{{count}} filament",filamentCount_other:"{{count}} filament",eta:"ETA {{minutes}} dk",noPreview:"Bu dosya için önizleme yok",pagination:{pageOf:"{{total}} sayfadan {{current}} tanesi",prev:"Önceki",next:"Sonraki"},errors:{failedToLoad:"Dosya yüklenemedi",noMeshes:"3MF dosyasında ağ bulunamadı",unsupportedFormat:"Desteklenmeyen dosya formatı"}},maintenanceDescriptions:{lubricateCarbonRods:"Düzgün hareket için karbon çubuklara yağ uygula",lubricateRails:"Düzgün hareket için lineer raylara yağ uygula",cleanNozzle:"Tıkanmaları önlemek için hotend ve nozulu temizle",checkBelts:"Doğru baskılar için kayış gerginliğini kontrol et",cleanBuildPlate:"Daha iyi yapışma için baskı plakasını temizle",checkExtruder:"Aşınma için ekstrüder dişlilerini inceleyin",checkCooling:"Soğutma fanlarının düzgün çalıştığından emin ol",generalInspection:"Genel yazıcı denetimi",cleanCarbonRods:"Sürtünmeyi azaltmak için karbon çubukları temizle",lubricateSteelRods:"Düzgün hareket için çelik çubuklara yağ uygula",cleanSteelRods:"Sürtünmeyi azaltmak için çelik çubukları temizle",cleanLinearRails:"Toz ve kalıntıları temizlemek için lineer rayları sil",checkPtfeTube:"Aşınma veya hasar için PTFE tüpünü incele",replaceHepaFilter:"Hava kalitesi için HEPA filtresini değiştir",replaceCarbonFilter:"Aktif karbon filtresini değiştir",lubricateLeftNozzleRail:"Sol nozul rayını yağla (H2 serisi)"},smartPlugs:{offline:"Çevrimdışı",admin:"Yönetici",openPlugAdminPage:"Priz yönetici sayfasını aç",deleteSmartPlug:"Akıllı Prizi Sil",turnOnSmartPlug:"Akıllı Prizi Aç",turnOffSmartPlug:"Akıllı Prizi Kapat",turnOn:"Aç",turnOff:"Kapat",addSmartPlug:{scanningNetwork:"Ağ taranıyor...",chooseEntity:"Bir varlık seçin...",connectionFailed:"Bağlantı başarısız",searchEntities:"Varlıklarda ara...",searchPowerSensors:"Güç sensörlerinde ara...",searchEnergySensors:"Enerji sensörlerinde ara...",placeholders:{plugName:"Oturma Odası Prizi",mqttStateOnValue:"ON, true, 1",mqttSameAsPower:"Güç konusuyla aynı veya farklı"}},linkedTo:"Bağlı:",monitorOnly:"Yalnızca İzle",alerts:"Uyarılar",scheduleOn:"{{time}} Açık",scheduleOff:"{{time}} Kapalı",on:"Açık",off:"Kapalı",power:"Güç",kwhToday:"Bugün kWh",settings:"Ayarlar",automationSettings:"Otomasyon Ayarları",showInSwitchbar:"Anahtar Çubuğunda Göster",quickAccessSidebar:"Kenar çubuğundan hızlı erişim",enabled:"Etkin",enableAutomation:"Bu priz için otomasyonu etkinleştir",autoOn:"Otomatik Aç",autoOnDescription:"Baskı başladığında aç",autoOff:"Otomatik Kapat",autoOffDescription:"Baskı tamamlandığında kapat (tek seferlik)",autoOffPersistent:"Etkin Tut",autoOffPersistentDescription:"Tek seferlik yerine baskılar arasında etkin kal",autoOffAfterDrying:"Kurutmadan Sonra Otomatik Kapat",autoOffAfterDryingDescription:"AMS kurutması tamamlandığında kapat",delayAfterDryingMinutes:"Kurutma gecikmesi (dakika)",turnOffDelayMode:"Kapatma Gecikme Modu",time:"Süre",temp:"Sıcaklık",delayMinutes:"Gecikme (dakika)",tempThreshold:"Sıcaklık eşiği (°C)",tempThresholdDescription:"Nozul bu sıcaklığın altına soğuduğunda kapanır",edit:"Düzenle",deleteConfirm:'"{{name}}" silmek istediğinizden emin misiniz? Bu geri alınamaz.',turnOnConfirm:'"{{name}}" açmak istediğinizden emin misiniz?',turnOffConfirm:'"{{name}}" kapatmak istediğinizden emin misiniz? Bu, bağlı cihazın gücünü kesecek.',failedToTurn:'"{{name}}" {{action}} başarısız',unknown:"Bilinmiyor",addTitle:"Akıllı Priz Ekle",editTitle:"Akıllı Prizi Düzenle",stopScanning:"Taramayı Durdur",discoverTasmota:"Tasmota Cihazlarını Keşfet",foundDevices:"{{count}} cihaz bulundu - seçmek için tıklayın:",noDevicesFound:"Ağınızda Tasmota cihazı bulunamadı",haNotConfigured:"Home Assistant yapılandırılmamış. Şuradan ayarlayın:",haSettingsPath:"Ayarlar → Ağ → Home Assistant",selectEntity:"Varlık Seç *",ipAddress:"IP Adresi *",nameLabel:"Ad *",username:"Kullanıcı Adı",password:"Parola",authHint:"Tasmota cihazınız kimlik doğrulama gerektirmiyorsa boş bırakın",linkToPrinter:"Yazıcıya Bağla",noPrinter:"Yazıcı yok (yalnızca manuel kontrol)",linkingDescription:"Bağlama, baskılar başladığında/tamamlandığında otomatik açma/kapamayı etkinleştirir",powerAlerts:"Güç Uyarıları",alertAbove:"Üstündeyse uyar (W)",alertBelow:"Altındaysa uyar (W)",alertDescription:"Güç tüketimi bu eşikleri geçtiğinde bildirim alın. O yönü devre dışı bırakmak için boş bırakın.",dailySchedule:"Günlük Zamanlama",turnOnAt:"Şu saatte aç",turnOffAt:"Şu saatte kapat",scheduleDescription:"Prizi günlük olarak bu saatlerde otomatik aç/kapat. O eylemi atlamak için boş bırakın.",showOnPrinterCard:"Yazıcı Kartında Göster",displayOnPrinterCard:"Yazıcı kartında düğme göster",connectedResult:"Bağlandı!",deviceLabel:"Cihaz: {{name}} - ",stateLabel:"Durum: {{state}}",test:"Test",delete:"Sil",save:"Kaydet",add:"Ekle",cancel:"İptal",failedToStartScan:"Tarama başlatılamadı",nameRequired:"Ad gerekli",entityRequired:"Home Assistant prizleri için varlık gerekli",mqttTopicRequired:"Güç, enerji veya durum izleme için en az bir MQTT konusu yapılandırılmalı",loadingEntities:"Varlıklar yükleniyor...",loading:"Yükleniyor...",failedToLoadEntities:"Varlıklar yüklenemedi: {{error}}",noEntitiesMatching:'"{{search}}" ile eşleşen varlık bulunamadı',noEntitiesAvailable:"Kullanılabilir varlık yok",searchingEntities:"Tüm varlıklar aranıyor ({{count}} bulundu)",showingEntities:"switch, light, input_boolean gösteriliyor ({{count}} mevcut)",energyMonitoringOptional:"Enerji İzleme (İsteğe Bağlı)",energyMonitoringHint:"Güç/enerji verisi sağlayan sensörleri arayın ve seçin.",powerSensorW:"Güç Sensörü (W)",energyTodayKwh:"Bugünkü Enerji (kWh)",totalEnergyKwh:"Toplam Enerji (kWh)",noMatchingSensors:"Eşleşen sensör yok",none:"Hiçbiri",mqttNotConfigured:"MQTT brokerı yapılandırılmamış. Şurada broker adresini ayarlayın:",mqttSettingsPath:"Ayarlar → Ağ → MQTT Yayınlama",mqttNotConfiguredSuffix:"(yayınlamayı etkinleştirmenize gerek yok, yalnızca broker ayrıntılarını doldurun).",mqttMonitorOnlyDescription:"MQTT prizleri MQTT aboneliği aracılığıyla güç/enerji verisi alır. Açma/kapama kontrolü kullanılamaz - MQTT brokerınızı veya ev otomasyon sisteminizi kullanın.",powerMonitoring:"Güç İzleme",energyMonitoring:"Enerji İzleme",stateMonitoring:"Durum İzleme",optional:"isteğe bağlı",topic:"Konu",jsonPath:"JSON Yolu",multiplier:"Çarpan",onValue:"ON Değeri",mqttPowerHint:`JSON yolu JSON yükten değer çıkarır (örn., "power_l1"). Konu ham sayısal değerler yayınlıyorsa boş bırakın.
 mW→W için 0.001, kW→W için 1000 çarpanı kullanın.`,mqttEnergyHint:`JSON yolu JSON yükten değer çıkarır. Ham değerler için boş bırakın.
 Wh→kWh için 0.001, MWh→kWh için 1000 çarpanı kullanın.`,mqttStateHint:`JSON yolu JSON yükten değer çıkarır. Ham değerler için boş bırakın.
 ON değeri: "ON" anlamına gelen tam string. Otomatik algılama için boş bırakın (ON, true, 1).`,restControl:"Kontrol",restOnUrl:"AÇ URL'si",restOffUrl:"KAPAT URL'si",restOnBody:"AÇ İstek Gövdesi",restOffBody:"KAPAT İstek Gövdesi",restMethod:"HTTP Yöntemi",restHeaders:"Özel Başlıklar (JSON)",restStatusUrl:"Durum URL'si",restStatusPath:"Durum JSON Yolu",restStatusOnValue:"ON Değeri",restPowerUrl:"Güç URL'si",restPowerPath:"Güç JSON Yolu",restPowerMultiplier:"Güç Çarpanı",restEnergyUrl:"Enerji URL'si",restEnergyPath:"Enerji JSON Yolu",restEnergyMultiplier:"Enerji Çarpanı",restUrlRequired:"REST prizleri için en az bir URL (ON veya OFF) gerekli",restHeadersHint:'örn. {"Authorization": "Bearer your-token"}',restBodyHint:'örn. ON, {"state": "on"}',restStatusHint:"Mevcut durumu sorgulamak için URL",restPathHint:"örn. state veya data.power.status",restPowerUrlHint:"Güç verisi için ayrı URL (boşsa Durum URL'sini kullanır)",restEnergyUrlHint:"Enerji verisi için ayrı URL (boşsa Durum URL'sini kullanır)",restEnergyHint:"Her değer kendi URL'sini kullanabilir veya Durum URL'sine geri dönebilir. Birim dönüşümü için çarpanları kullanın (örn. Wh'yi kWh'ye dönüştürmek için 0.001).",testConnection:"Bağlantıyı Test Et",connectionSuccess:"Bağlantı başarılı",noSwitchesInSwitchbar:"Anahtar çubuğunda anahtar yok",enableSwitchbarHint:`Ayarlar > Akıllı Prizler'de "Anahtar Çubuğunda Göster"i etkinleştirin`},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"E-posta",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"SMTP e-posta bildirimleri",telegram:"Telegram botu üzerinden bildirimler",discord:"Webhook üzerinden Discord kanalına gönder",ntfy:"Ücretsiz, kendi barındırılabilir push bildirimleri",pushover:"Basit, güvenilir push bildirimleri",callmebot:"CallMeBot üzerinden ücretsiz WhatsApp bildirimleri",webhook:"Herhangi bir URL'ye genel HTTP POST",homeassistant:"Home Assistant gösterge panelinde kalıcı bildirimler"},lastSuccess:"Son: {{date}}",error:"Hata",printer:"Yazıcı:",allPrinters:"Tüm yazıcılar",sendTestNotification:"Test Bildirimi Gönder",eventSettings:"Olay Ayarları",enabled:"Etkin",sendFromProvider:"Bu sağlayıcıdan bildirim gönder",printEvents:"Baskı Olayları",printerStatus:"Yazıcı Durumu",amsAlarms:"AMS Alarmları",amsHtAlarms:"AMS-HT Alarmları",printQueue:"Baskı Kuyruğu",start:"Başlangıç",plateCheck:"Plaka Kontrolü",complete:"Tamamlandı",failed:"Başarısız",stopped:"Durduruldu",progress:"İlerleme",offline:"Çevrimdışı",lowFilament:"Az Filament",maintenance:"Bakım",amsHumidity:"AMS Nemi",amsTemp:"AMS Sıcaklığı",amsHtHumidity:"AMS-HT Nemi",amsHtTemp:"AMS-HT Sıcaklığı",bedCooled:"Tabla Soğudu",firstLayer:"İlk Katman",quiet:"Sessiz",digest:"Özet {{time}}",printStarted:"Baskı Başladı",plateNotEmpty:"Plaka Boş Değil",plateNotEmptyDescription:"Baskıdan önce nesneler algılandı",printCompleted:"Baskı Tamamlandı",bedCooledLabel:"Tabla Soğudu",bedCooledDescription:"Baskıdan sonra tabla eşiğin altına soğudu",firstLayerCompleteLabel:"İlk Katman Tamamlandı",firstLayerCompleteDescription:"İlk katman bittiğinde anlık görüntüyle bildir",missingSpoolAssignmentLabel:"Eksik Makara Ataması",missingSpoolAssignmentDescription:"Baskı başladığında ve gerekli tepsilerin atanmış makarası olmadığında bildir",printFailed:"Baskı Başarısız",printStopped:"Baskı Durduruldu",progressMilestones:"İlerleme Kilometre Taşları",progressMilestonesDescription:"%25, %50, %75'te bildir",printerOffline:"Yazıcı Çevrimdışı",printerError:"Yazıcı Hatası",lowFilamentLabel:"Az Filament",maintenanceDue:"Bakım Zamanı",maintenanceDueDescription:"Bakım gerektiğinde bildir",amsHumidityHigh:"AMS Nemi Yüksek",amsHumidityHighDescription:"Normal AMS nemi eşiği aşıyor",amsTemperatureHigh:"AMS Sıcaklığı Yüksek",amsTemperatureHighDescription:"Normal AMS sıcaklığı eşiği aşıyor",amsHtHumidityHigh:"AMS-HT Nemi Yüksek",amsHtHumidityHighDescription:"AMS-HT nemi eşiği aşıyor",amsHtTemperatureHigh:"AMS-HT Sıcaklığı Yüksek",amsHtTemperatureHighDescription:"AMS-HT sıcaklığı eşiği aşıyor",inventoryAlerts:"Envanter Uyarıları",stockReorderAlert:"Yeniden Sipariş Uyarısı",stockReorderAlertDescription:"SKU yeniden sipariş noktasına ulaştı",stockBreakAlert:"Stok Tükenme Uyarısı",stockBreakAlertDescription:"Yenileme gelmeden stok tükenecek",jobAdded:"İş Eklendi",jobAddedDescription:"İş kuyruğa eklendi",jobAssigned:"İş Atandı",jobAssignedDescription:"Model tabanlı iş yazıcıya atandı",jobStarted:"İş Başladı",jobStartedDescription:"Kuyruk işi yazdırmaya başladı",jobWaiting:"İş Bekliyor",jobWaitingDescription:"İş filament veya yazıcı için bekliyor",jobSkipped:"İş Atlandı",jobSkippedDescription:"İş atlandı (önceki başarısız oldu)",jobFailed:"İş Başarısız",jobFailedDescription:"İş başlatılamadı",queueComplete:"Kuyruk Tamamlandı",queueCompleteDescription:"Tüm kuyruk işleri bitti",quietHours:"Sessiz Saatler",noNotificationsDuring:"Bu saatler arasında bildirim yok",editProviderToChangeQuietHours:"Sessiz saatleri değiştirmek için sağlayıcıyı düzenleyin",dailyDigest:"Günlük Özet",batchNotifications:"Bildirimleri tek bir günlük özette topla",sendAt:"{{time}}'de gönder",editProviderToChangeDigestTime:"Özet saatini değiştirmek için sağlayıcıyı düzenleyin",edit:"Düzenle",deleteProvider:"Bildirim Sağlayıcısını Sil",deleteConfirm:'"{{name}}" silmek istediğinizden emin misiniz? Bu geri alınamaz.',delete:"Sil",addTitle:"Bildirim Sağlayıcısı Ekle",editTitle:"Bildirim Sağlayıcısını Düzenle",nameLabel:"Ad *",namePlaceholder:"Bildirimlerim",providerTypeLabel:"Sağlayıcı Türü *",configuration:"Yapılandırma",testConfiguration:"Yapılandırmayı Test Et",printerFilter:"Yazıcı Filtresi",onlyFromPrinter:"Yalnızca bu yazıcının olayları için bildirim gönder",quietHoursDnd:"Sessiz Saatler (Rahatsız Etme)",quietStart:"Başlangıç",quietEnd:"Bitiş",dailyDigestLabel:"Günlük Özet",sendDigestAt:"Özeti şu saatte gönder",digestCollected:"Olaylar toplanacak ve bu saatte tek bir özet olarak gönderilecek",notificationEvents:"Bildirim Olayları",progressPercent:"(%25, %50, %75)",bedCooledAfterPrint:"(baskı tamamlandıktan sonra)",eventPriority:{sectionTitle:"ntfy Önceliği",helpNtfy:"Her etkin olay için bir öncelik seçin. ntfy uyarıları kademelendirmek için bunları kullanır (ses, görünürlük, push davranışı). Burada ayarlanmamış seviyeler ntfy sunucu varsayılanını kullanır.",min:"Min",low:"Düşük",default:"Varsayılan",high:"Yüksek",urgent:"Acil"},cancel:"İptal",save:"Kaydet",add:"Ekle",nameRequired:"Ad gerekli",fieldRequired:"{{field}} gerekli",phoneNumber:"Telefon Numarası",apiKey:"API Anahtarı",serverUrl:"Sunucu URL",topic:"Konu",authToken:"Yetkilendirme Belirteci",userKey:"Kullanıcı Anahtarı",appToken:"Uygulama Belirteci",priority:"Öncelik",botToken:"Bot Belirteci",chatId:"Sohbet ID",smtpServer:"SMTP Sunucusu",smtpPort:"SMTP Portu",security:"Güvenlik",authentication:"Kimlik Doğrulama",username:"Kullanıcı Adı",password:"Parola",fromEmail:"Gönderen E-posta",toEmail:"Alıcı E-posta",webhookUrl:"Webhook URL",payloadFormat:"Yük Formatı",authorization:"Yetkilendirme",titleFieldName:"Başlık Alanı Adı",messageFieldName:"Mesaj Alanı Adı",editTemplate:"Şablonu Düzenle: {{name}}",titleLabel:"Başlık",bodyLabel:"Gövde",titlePlaceholder:"Bildirim başlığı...",bodyPlaceholder:"Bildirim gövdesi...",availableVariables:"Kullanılabilir Değişkenler",clickToInsert:"Gövdede imleç konumuna eklemek için tıklayın",livePreview:"Canlı Önizleme",hide:"Gizle",show:"Göster",loadingPreview:"Önizleme yükleniyor...",enterTemplateContent:"Önizlemeyi görmek için şablon içeriğini girin",titlePreview:"Başlık:",bodyPreview:"Gövde:",resetToDefault:"Varsayılana Sıfırla",titleRequired:"Başlık gerekli",bodyRequired:"Gövde gerekli",notificationLog:"Bildirim Günlüğü",showFailedOnly:"Yalnızca başarısız",last24Hours:"Son 24 saat",last7Days:"Son 7 gün",last30Days:"Son 30 gün",last90Days:"Son 90 gün",justNow:"Az önce",noFailedNotifications:"Başarısız bildirim yok",noNotificationsLogged:"Kaydedilen bildirim yok",unknownProvider:"Bilinmeyen Sağlayıcı",logTitle:"Başlık",logMessage:"Mesaj",logError:"Hata",logProvider:"Sağlayıcı: {{type}}",logTime:"Saat: {{time}}",refresh:"Yenile",clearOld:"Eskileri Temizle",statsSummary:"Son {{days}} gün:",statsNotifications:"bildirim",statsSent:"{{count}} gönderildi",statsFailed:"{{count}} başarısız",eventTypes:{print_start:"Baskı Başladı",print_complete:"Baskı Tamamlandı",print_failed:"Baskı Başarısız",print_stopped:"Baskı Durduruldu",print_progress:"İlerleme",printer_offline:"Yazıcı Çevrimdışı",printer_error:"Yazıcı Hatası",filament_low:"Az Filament",maintenance_due:"Bakım Zamanı",test:"Test"},userEmail:{title:"Bildirimler",emailNotifications:"E-posta Bildirimleri",emailNotificationsDesc:"Kendi baskı işleriniz için e-posta bildirimleri alın. E-postalar Gelişmiş Kimlik Doğrulamada yapılandırılan sistem SMTP ayarları kullanılarak gönderilir.",sendingTo:"Bildirimler şuraya gönderilecek",noEmailWarning:"Hesabınızın e-posta adresi yok. Eklemek için bir yöneticiyle iletişime geçin.",printJobNotifications:"Baskı İşi Bildirimleri",printJobNotificationsDesc:"Gönderdiğiniz baskı işleri için hangi olayların e-posta bildirimlerini tetikleyeceğini seçin.",printJobStarts:"Baskı İşi Başlar",printJobStartsDesc:"Baskı işiniz başladığında bildirim alın.",printJobFinishes:"Baskı İşi Biter",printJobFinishesDesc:"Baskı işiniz başarıyla tamamlandığında bildirim alın.",printErrors:"Baskı Hataları",printErrorsDesc:"Baskı işiniz başarısız olduğunda veya bir hatayla karşılaştığında bildirim alın.",printJobStops:"Baskı İşi Durur",printJobStopsDesc:"Baskı işiniz iptal edildiğinde veya durdurulduğunda bildirim alın.",saveSuccess:"Bildirim tercihleri kaydedildi.",saveError:"Bildirim tercihleri kaydedilemedi."}},richTextEditor:{bold:"Kalın",italic:"İtalik",underline:"Altı Çizili",bulletList:"Madde İşaretli Liste",numberedList:"Numaralı Liste",alignLeft:"Sola Hizala",alignCenter:"Ortaya Hizala",alignRight:"Sağa Hizala",addLink:"Bağlantı Ekle",removeLink:"Bağlantıyı Kaldır"},externalLinks:{noLinksConfigured:"Yapılandırılmış harici bağlantı yok",deleteLink:"Bağlantıyı Sil",removeCustomIcon:"Özel simgeyi kaldır",openInNewTab:"Yeni sekmede aç",placeholders:{linkName:"Bağlantım"}},keyboardShortcuts:{title:"Klavye Kısayolları",navigation:"Navigasyon",archivesSection:"Arşivler",kProfilesSection:"K-Profilleri",generalSection:"Genel",shortcuts:{goToPrinters:"Yazıcılara Git",goToArchives:"Arşivlere Git",goToQueue:"Kuyruğa Git",goToStats:"İstatistiklere Git",goToProfiles:"Bulut Profillerine Git",goToSettings:"Ayarlara Git",focusSearch:"Aramaya odaklan",openUploadModal:"Yükleme modalini aç",clearSelection:"Seçimi temizle / odağı kaldır",contextMenu:"Kartlarda bağlam menüsü",refreshProfiles:"Profilleri yenile",newProfile:"Yeni profil",exitSelectionMode:"Seçim modundan çık",showHelp:"Bu yardımı göster"},footer:"Kapatmak için Esc'ye basın veya dışarı tıklayın"},notificationLog:{title:"Bildirim Günlüğü",events:{printStarted:"Baskı Başladı",printComplete:"Baskı Tamamlandı",printFailed:"Baskı Başarısız",printStopped:"Baskı Durduruldu",progress:"İlerleme",printerOffline:"Yazıcı Çevrimdışı",printerError:"Yazıcı Hatası",lowFilament:"Az Filament",maintenanceDue:"Bakım Zamanı",test:"Test"},timeAgo:{justNow:"Az önce",minutesAgo:"{{minutes}}dk önce",hoursAgo:"{{hours}}sa önce"}},restoreBackup:{title:"Yedeği Geri Yükle",restoring:"Geri yükleniyor...",restoreComplete:"Geri Yükleme Tamamlandı",restoreFailed:"Geri Yükleme Başarısız",importSettings:"Ayarları bir yedek dosyasından içe aktar",pleaseWait:"Verileriniz geri yüklenirken lütfen bekleyin",clickToSelect:"Yedek dosyası seçmek için tıklayın (.json veya .zip)",howDuplicateHandling:"Yinelenen yönetiminin nasıl çalıştığı:",categories:{printers:"Yazıcılar",smartPlugs:"Akıllı Prizler",notificationProviders:"Bildirim Sağlayıcıları",filaments:"Filamentler",archives:"Arşivler",pendingUploads:"Bekleyen Yüklemeler",settingsTemplates:"Ayarlar ve Şablonlar"},matchingInfo:{printers:"seri numarasına göre eşleşti",smartPlugs:"IP adresine göre eşleşti",notificationProviders:"ada göre eşleşti",filaments:"ad + tür + markaya göre eşleşti",archives:"içerik hash'ine göre eşleşti",pendingUploads:"dosya adına göre eşleşti",settingsTemplates:"her zaman üzerine yazılır"},replaceExisting:"Mevcut veriyi değiştir",keepExisting:"Mevcut veriyi koru",replaceDescription:"Zaten mevcut olan öğeleri yedek verisiyle üzerine yaz",keepDescription:"Yalnızca zaten mevcut olmayan öğeleri geri yükle",caution:"Dikkat:",cautionText:"Üzerine yazma, mevcut yapılandırmalarınızı yedek verisiyle değiştirecek. Güvenlik için yazıcı erişim kodları asla üzerine yazılmaz.",itemsRestored:"Geri Yüklenen Öğeler",itemsSkipped:"Atlanan Öğeler",restored:"Geri yüklendi",skipped:"Atlandı (zaten mevcut)",filesLabel:"Dosyalar (3MF, küçük resimler, vb.)",newApiKeysGenerated:"Yeni API Anahtarları Oluşturuldu",newApiKeysWarning:"Bu anahtarlar yalnızca bir kez gösterilir. Şimdi kopyalayın!",processingBackup:"Yedek dosyası işleniyor...",noDataFound:"Yedek dosyasında geri yüklenecek veri bulunamadı.",failedToRestore:"Yedek geri yüklenemedi. Lütfen dosya formatını kontrol edin."},backupExport:{title:"Yedeği Dışa Aktar",selectData:"Dahil edilecek veriyi seçin",selectAll:"Tümünü Seç",selectNone:"Hiçbirini Seçme",categoryDescriptions:{settings:"Dil, tema, güncelleme tercihleri",notifications:"ntfy, Pushover, Discord, vb.",templates:"Özel mesaj şablonları",smartPlugs:"Tasmota priz yapılandırmaları",externalLinks:"Harici servislere kenar çubuğu bağlantıları",printers:"Yazıcı bilgisi (erişim kodları hariç)",plateDetection:"Boş plaka referans görüntüleri",filaments:"Filament türleri ve maliyetleri",maintenance:"Özel bakım programları",archives:"Tüm baskı verileri + dosyalar (3MF, küçük resimler, fotoğraflar)",projects:"Projeler, BOM öğeleri ve ekler",pendingUploads:"İnceleme bekleyen sanal yazıcı yüklemeleri",apiKeys:"Webhook API anahtarları (içe aktarımda yeni anahtarlar oluşturulur)"},requiresPrinters:"Yazıcıların seçili olması gerekir",zipFileWarning:"ZIP dosyası oluşturulacak.",zipFileDescription:"Tüm 3MF dosyalarını, küçük resimleri, zaman atlamalı videoları ve fotoğrafları içerir. Bu biraz zaman alabilir ve büyük bir dosya oluşturabilir.",includeAccessCodes:"Erişim Kodlarını Dahil Et",includeAccessCodesDescription:"Başka bir makineye aktarmak için",includeAccessCodesWarning:"Erişim kodları düz metin olarak dahil edilecek. Bu yedek dosyasını güvende tutun!",categoriesSelected:"{{selectedCount}} kategori seçildi"},pendingUploads:{placeholders:{notes:"Bu baskı hakkında notlar ekleyin..."},discardUpload:"Yüklemeyi At",archiveAllUploads:"Tüm Yüklemeleri Arşivle",discardAllUploads:"Tüm Yüklemeleri At",archive:"Arşivle",timeAgo:{justNow:"Az önce",minutesAgo:"{{minutes}}dk önce",hoursAgo:"{{hours}}sa önce",daysAgo:"{{days}}g önce"}},apiBrowser:{placeholders:{requestBody:"JSON istek gövdesi...",searchEndpoints:"Uç noktalarda ara..."}},configureAmsSlot:{title:"AMS Yuvasını Yapılandır",slotConfigured:"Yuva Yapılandırıldı!",configuringSlot:"Yuva yapılandırılıyor:",slotLabel:"{{ams}} Yuva {{slot}}",searchPresets:"Ön ayarlarda ara...",colorPlaceholder:"Renk adı veya hex (örn., kahverengi, FF8800)",clearCustomColor:"Özel rengi temizle",noCloudPresets:"Bulut ön ayarı yok. Senkronize etmek için Bambu Cloud'a giriş yapın.",noPresetsAvailable:"Kullanılabilir ön ayar yok. Bambu Cloud'a giriş yapın veya yerel profilleri içe aktarın.",noMatchingPresets:"Eşleşen ön ayar bulunamadı.",custom:"Özel",builtin:"Yerleşik",settingsSentToPrinter:"Ayarlar yazıcıya gönderildi",filamentProfile:"Filament Profili",kProfileLabel:"K Profili (Basınç İlerlemesi)",filteringFor:"Şu için filtreleniyor: {{material}}",noKProfile:"K profili yok (varsayılan 0.020 kullan)",noMatchingKProfiles:"Eşleşen K profili bulunamadı. Varsayılan K=0.020 kullanılacak.",selectFilamentFirst:"Önce bir filament profili seçin",kFromCalibration:"Yazıcı kalibrasyonundan K={{value}}",customColorLabel:"Özel Renk (isteğe bağlı)",presetColors:"{{name}} renkleri:",showLessColors:"Daha az renk göster",showMoreColors:"Daha fazla renk göster",clear:"Temizle",hexLabel:"Hex: #{{hex}}",resetting:"Sıfırlanıyor...",resetSlot:"Yuvayı Sıfırla",cancel:"İptal",configuring:"Yapılandırılıyor...",configureSlot:"Yuvayı Yapılandır"},githubBackup:{title:"Git Yedekleme",history:"Geçmiş",downloadBackup:"Yedeği İndir",restoreBackup:"Yedeği Geri Yükle",noBackupsYet:"Henüz yedek yok"},emailSettings:{placeholders:{fromName:"BamBuddy"}},tagManagement:{searchTags:"Etiketlerde ara...",renameTag:"Etiketi yeniden adlandır",deleteTag:"Etiketi sil"},notificationTemplates:{placeholders:{title:"Bildirim başlığı...",body:"Bildirim gövdesi..."}},batchTag:{placeholders:{newTag:"Yeni etiket girin..."}},photoGallery:{deletePhoto:"Fotoğrafı Sil"},filamentHoverCard:{copySpoolUuid:"Makara UUID'sini kopyala"},kProfilesView:{hasNote:"Notu var",copyProfile:"Profili kopyala"},layout:{openMenu:"Menüyü aç",noPermissionSystemInfo:"Sistem bilgisini görüntüleme izniniz yok"},dashboard:{dragToReorder:"Yeniden sıralamak için sürükleyin",hideWidget:"Widget'ı gizle"},notificationProviderCard:{deleteNotificationProvider:"Bildirim Sağlayıcısını Sil"},fileManagerModal:{closeFileManager:"Dosya yöneticisini kapat",sortFiles:"Dosyaları sırala",goToParentFolder:"Üst klasöre git",threeView:"3B Görünüm"},embeddedCameraViewer:{refreshStream:"Akışı yenile",close:"Kapat",zoomOut:"Uzaklaştır",resetZoom:"Yakınlaştırmayı sıfırla",zoomIn:"Yakınlaştır",dragToResize:"Yeniden boyutlandırmak için sürükleyin"},timelapseViewer:{skipBack5s:"5 sn geri al",skipForward5s:"5 sn ileri al"},notificationProviders:{descriptions:{email:"SMTP e-posta bildirimleri",telegram:"Telegram botu üzerinden bildirimler",discord:"Webhook üzerinden Discord kanalına gönder",ntfy:"Ücretsiz, kendi barındırılabilir push bildirimleri",pushover:"Basit, güvenilir push bildirimleri",callmebot:"CallMeBot üzerinden ücretsiz WhatsApp bildirimleri",webhook:"Herhangi bir URL'ye genel HTTP POST"}},logViewer:{searchPlaceholder:"Mesaj veya günlükçü adı ara...",noLogEntries:"Günlük kaydı bulunamadı"},switchbarPopover:{noSwitchesInSwitchbar:"Anahtar çubuğunda anahtar yok"},projectPageModal:{placeholders:{title:"Başlık",designer:"Tasarımcı",license:"Lisans",description:"Açıklama girin...",profileTitle:"Profil Başlığı",profileDescription:"Profil açıklaması..."}},spoolmanSettings:{},time:{unknown:"-",waiting:"Bekliyor",justNow:"Az önce",now:"Şimdi",minsAgo:"{{count}}dk önce",inMins:"{{count}}dk sonra",hoursAgo:"{{count}}sa önce",inHours:"{{count}}sa sonra",daysAgo:"{{count}}g önce",inDays:"{{count}}g sonra"},spoolbuddy:{nav:{dashboard:"Gösterge Paneli",ams:"AMS",inventory:"Envanter",writeTag:"Yaz",settings:"Ayarlar"},status:{nfcReady:"NFC Hazır",nfcOff:"NFC Kapalı",offline:"Çevrimdışı",online:"Çevrimiçi",noPrinters:"Yazıcı yok",deviceOffline:"Cihaz Çevrimdışı",waitingConnection:"Cihaz bağlantısı bekleniyor...",systemReady:"Sistem Hazır",status:"Durum"},dashboard:{readyToScan:"Taramaya hazır",idleMessage:"Tanımlamak için bir makarayı tartıya yerleştirin",nfcHint:"NFC etiketi otomatik olarak okunacak",device:"Cihaz",syncWeight:"Ağırlığı Senkronize Et",weightSynced:"Senkronize edildi!",unknownTag:"Bilinmeyen Etiket",newTag:"Yeni Etiket Algılandı",onScale:"tartıda",linkSpool:"Makaraya Bağla",linkTagTitle:"Etiketi Makaraya Bağla",linkTag:"Etiketi Bağla",selectSpool:"Bu etiketi bağlamak için bir makara seçin:",noUntagged:"Etiketsiz makara bulunamadı",tagDetected:"Etiket algılandı",noTag:"Etiket yok",tagId:"Etiket",grossWeight:"Brüt ağırlık",spoolSize:"Makara boyutu",close:"Kapat",currentSpool:"Mevcut Makara",plateReady:"Plaka hazır: {{name}}",plateReadyLabel:"Temizlenmeye hazır plakalar",plateClearAction:"Temizle",plateClearedToast:"Plaka temizlendi olarak işaretlendi",plateClearFailed:"Plaka temizlendi olarak işaretlenemedi"},modal:{spoolDetected:"Makara Algılandı",assignToAms:"AMS'e Ata",syncWeight:"Ağırlığı Senkronize Et",weightSynced:"Senkronize edildi!",syncing:"Senkronize ediliyor...",newTagDetected:"Yeni Etiket Algılandı",addToInventory:"Envantere Ekle",assignToAmsTitle:"AMS'e Ata",selectSlot:"Bir yuva seçin",assign:"Ata",assigning:"Atanıyor...",assignSuccess:"Atandı!",assignPendingInsert:"Atandı. Makarayı yerleştirdiğinizde yuva yapılandırılacak.",assignError:"Makara atanamadı. Lütfen tekrar deneyin.",noPrinterSelected:"Bir yazıcı seçin...",noAmsDetected:"Bu yazıcıda AMS algılanmadı",slot:"Yuva"},weight:{noReading:"Okuma yok",stable:"Kararlı",measuring:"Ölçülüyor...",tare:"Dara",calibrate:"Kalibre Et"},spool:{remaining:"Kalan",material:"Malzeme",brand:"Marka",color:"Renk",coreWeight:"Çekirdek",labelWeight:"Etiket",scaleWeight:"Tartı",netWeight:"Net",lastUsed:"Son kullanım"},ams:{noData:"AMS algılanmadı",connectAms:"Filament yuvalarını görmek için bir AMS bağlayın",noPrinter:"Yazıcı seçilmedi",selectPrinter:"Üst çubuktan bir yazıcı seçin",printerDisconnected:"Yazıcı bağlantısı kesildi",humidity:"Nem",level:"Seviye",active:"Aktif",slot:"Yuva",empty:"Boş"},inventory:{search:"Makaralarda ara...",empty:"Envanterde makara yok",noResults:"Eşleşen makara yok",spools:"makara",addSpool:"Makara Ekle"},settings:{tabDevice:"Cihaz",tabDisplay:"Görüntü",tabScale:"Tartı",tabUpdates:"Güncellemeler",nfcReader:"NFC Okuyucu",type:"Tür",connection:"Bağlantı",notConnected:"N/A",deviceInfo:"Cihaz Bilgisi",hostname:"Ana Bilgisayar",uptime:"Çalışma Süresi",systemConfig:"Arka Uç ve Kimlik Doğrulama",backendUrl:"Bambuddy Arka Uç URL'si",apiToken:"API Belirteci",apiTokenPlaceholder:"API belirtecini girin",saveConfig:"Yapılandırmayı Kaydet",systemQueued:"Yapılandırma kuyruğa alındı.",nfcDiagnostic:"NFC Tanılaması",scaleDiagnostic:"Tartı Tanılaması",readTagDiagnostic:"Etiket Okuma Tanılaması",testNfc:"Okuyucuyu test et",testScale:"Doğruluğu test et",testReadTag:"Etiket oku",systemFieldsRequired:"Arka uç URL'si gerekli.",brightness:"Parlaklık",saved:"Kaydedildi",noBacklight:"DSI arka ışık algılanmadı. Parlaklık kontrolü DSI ekran gerektirir.",screenBlank:"Ekran Kapanma Zaman Aşımı",screenBlankDesc:"Hareketsizlik sonrası ekran kapanır. Uyandırmak için dokunun.",displayNote:"Parlaklık bir yazılım filtresi olarak uygulanır.",scaleCalibration:"Tartı Kalibrasyonu",currentWeight:"Mevcut ağırlık",tareOffset:"Dara",calFactor:"Faktör",knownWeight:"Bilinen ağırlık",calStep1:"Tartıdan tüm öğeleri kaldırın ve Sıfır Ayarla'ya basın.",calStep2:"Bilinen ağırlığı tartıya yerleştirin.",setZero:"Sıfır Ayarla",calibrateNow:"Kalibre Et",calibrated:"Kalibre edildi",tareSet:"Dara komutu gönderildi. Cihaz bekleniyor...",tareComplete:"Dara tamam!",tareTimedOut:"Dara zaman aşımına uğradı — SpoolBuddy daemon çalışıyor mu?",tareFailed:"Dara komutu gönderilemedi",zeroSet:"Sıfır noktası ayarlandı. Bilinen ağırlığı tartıya yerleştirin.",calibrationDone:"Kalibrasyon tamamlandı!",calibrationFailed:"Kalibrasyon başarısız",lastCalibrated:"Son kalibrasyon",stable:"Kararlı",settling:"Sabitleniyor...",firmware:"Firmware",scale:"Tartı",noDevice:"SpoolBuddy cihazı bulunamadı",daemonVersion:"Daemon Sürümü",currentVersion:"Mevcut",versionPending:"Daemon bekleniyor...",checking:"Kontrol ediliyor...",checkUpdates:"Güncellemeleri Kontrol Et",updateAvailable:"Güncelleme mevcut",updateInstructions:"SSH üzerinden güncelle: yükseltmek için SpoolBuddy yükleme betiğini çalıştırın.",upToDate:"Güncel",includeBeta:"Beta sürümleri dahil et"},writeTag:{tabExisting:"Mevcut Makara",tabNew:"Yeni Makara",tabReplace:"Etiketi Değiştir",searchPlaceholder:"Malzeme, renk, marka ile ara...",noUntaggedSpools:"Etiketsiz makara yok",noTaggedSpools:"Etiketli makara yok",selectSpool:"Bir makara seçin, ardından okuyucuya boş bir NTAG yerleştirin",placeTag:"Okuyucuya bir NTAG yerleştirin",tagReady:"Etiket algılandı — yazmaya hazır",writeTag:"Etiketi Yaz",replaceTag:"Etiketi Değiştir",writing:"Etiket yazılıyor...",waiting:"SpoolBuddy bekleniyor...",writeSuccess:"Etiket başarıyla yazıldı!",writeFailed:"Yazma başarısız",queueFailed:"Yazma komutu kuyruğa alınamadı",tryAgain:"Tekrar Dene",cancel:"İptal",replaceWarning:"Eski etiket bağlantısı kaldırılacak. Yeni etiket yerini alacak.",deviceOffline:"SpoolBuddy çevrimdışı",material:"Malzeme",colorName:"Renk Adı",color:"Renk",brand:"Marka",weight:"Ağırlık (g)",createSpool:"Makara Oluştur",creating:"Oluşturuluyor...",spoolCreated:"Makara oluşturuldu! Yazmaya hazır.",createFailed:"Makara oluşturulamadı",incompleteDataWarning:"Etiket eksik Spoolman verisiyle yazıldı"},quickMenu:{printerPower:"Yazıcı Gücü",systemControls:"Sistem",restartDaemon:"Daemon'u Yeniden Başlat",restartBrowser:"Tarayıcıyı Yeniden Başlat",reboot:"Yeniden Başlat",shutdown:"Kapat",swipeToClose:"Kapatmak için aşağı kaydır",confirmTitle:"Onayla",confirmShutdown:"SpoolBuddy'yi kapatmak istediğinizden emin misiniz? Tekrar açmak için fiziksel erişime ihtiyacınız olacak.",confirmReboot:"SpoolBuddy'yi yeniden başlatmak istediğinizden emin misiniz?",confirmRestartDaemon:"SpoolBuddy daemon yeniden başlatılsın mı? NFC ve tartı geçici olarak kullanılamayacak.",confirmRestartBrowser:"Kiosk tarayıcısı yeniden başlatılsın mı? Ekran kısa bir süre kararacak.",confirm:"Onayla",confirmPlugOn:"{{name}} açılsın mı?",confirmPlugOff:"{{name}} kapatılsın mı?",turnOn:"Aç",turnOff:"Kapat"}},diagnostic:{modalTitle:"Bağlantı tanılaması — {{name}}",running:"Tanılama çalışıyor...",runningElapsed:"Tanılama çalışıyor... ({{elapsed}}s)",waitingForReportHint:"Yazıcının durum raporu yayınlamasını bekliyor — bu işlem en fazla {{max}} saniye sürebilir.",runFailed:"Tanılama çalıştırılamadı: {{error}}",retry:"Tekrar çalıştır",runButton:"Tanılamayı çalıştır",sectionTitle:"Bağlantı Tanılaması",sectionDescription:"Bir yazıcının neden bağlanmadığını veya yazdırmadığını kontrol edin — port erişilebilirliği, LAN geliştirici modu, Docker ağ modu ve kimlik bilgileri.",noPrinters:"Yapılandırılmış yazıcı yok.",overall:{ok:"Sorun bulunamadı — yazıcı bağlantısı sağlıklı görünüyor.",warnings:"Yazıcı çalışmalı, ancak bazı şeyler dikkat gerektiriyor.",problems:"Yazıcının neden bağlanmadığını veya yazdırmadığını açıklayan sorunlar bulundu."},check:{port_mqtt:{title:"Kontrol portu (MQTT 8883)",pass:"Erişilebilir — yazıcı kontrol bağlantılarını kabul ediyor.",fail:"Port 8883 erişilemez. Yazıcı kapalı, farklı bir IP adresinde veya bir güvenlik duvarı engelliyor. Yazıcı IP'sini ve hiçbir şeyin port 8883'ü engellemediğini doğrulayın."},port_ftps:{title:"Dosya aktarım portu (FTPS 990)",pass:"Erişilebilir — baskı dosyaları gönderme çalışacak.",warn:"Port 990 erişilemez. İzleme yine çalışabilir, ancak yazıcıya baskı gönderme başarısız olacak. Port 990'ın engellenmediğinden emin olun."},port_rtsps:{title:"Kamera portu (RTSPS 322)",pass:"Erişilebilir — kamera akışı çalışacak.",warn:"Port 322 erişilemez. Canlı kamera görünümü çalışmayacak. Bu, baskıyı etkilemez."},network_mode:{title:"Docker ağ modu",pass:"Ana bilgisayar ağ modunda çalışıyor.",warn:'Bambuddy, Docker köprü ağı kullanılarak çalışıyor. Yazıcı keşfi ve Sanal Yazıcı, ana bilgisayar ağ modu gerektirir — konteyneri "network_mode: host" ile yeniden oluşturun.',skip:"Docker'da çalışmıyor — uygulanamaz."},subnet:{title:"Ağ alt ağı",pass:"Yazıcı ve Bambuddy aynı alt ağda.",warn:"Yazıcı ({{printer_ip}}) ve Bambuddy ({{host_ip}}) farklı alt ağlarda. Alt ağlar arasında yönlendirme yapılandırılmazsa birbirlerine erişemeyebilirler.",skip:"Alt ağ belirlenemedi — atlandı."},mqtt_auth:{title:"Yazıcı kimlik bilgileri",pass:"Yazıcı bağlantıyı kabul etti.",fail:"Yazıcı erişilebilir ancak bağlantıyı reddetti. Büyük olasılıkla erişim kodu veya seri numarası yanlış. Erişim kodu, Geliştirici Modu her açılıp kapatıldığında değişir — yazıcı ekranından yeniden kopyalayın.",skip:"Kontrol edilmedi — yazıcıya erişilemedi."},developer_mode:{title:"LAN Geliştirici Modu",pass:"Geliştirici Modu etkin.",fail:"Yazıcıda Geliştirici Modu KAPALI. Yazıcının LAN ayarlarında etkinleştirin — ve OK ile onaylayın. Bu olmadan baskılar başlamayacak.",skip:"Kontrol edilemedi — yazıcıya canlı bir bağlantı gerektirir."},printer_publishing:{title:"Yazıcı durum yayını yapıyor",pass:"Yazıcı durum güncellemelerini yayınlıyor — AMS, filamentler ve K profilleri dilimleyiciye doğru şekilde yansıtılacak.",fail:"MQTT aracısı bağlantıyı kabul etti, ancak yazıcı hiç durum raporu yayınlamadı. Bu neredeyse her zaman yanlış ya da büyük/küçük harf hatalı bir seri numarasından kaynaklanır — device/<serial>/report konusu büyük/küçük harfe duyarlıdır. Yazıcı ayarlarındaki seri numarasını cihazın ekranındaki ile karşılaştırarak doğrulayın.",skip:"Kontrol edilemedi — yazıcıya canlı bir bağlantı gerektirir."}}},systemHealth:{sectionTitle:"Sistem Sağlığı",sectionDescription:"Bir destek talebine dönüşmeden önce genellikle kendi başınıza düzeltebileceğiniz bilinen sorunlar için son günlükleri tarar.",rescan:"Yeniden tara",clean:"Son {{times}} günlük kaydında bilinen sorun bulunamadı.",logUnavailable:"Dosya günlüğü devre dışı, bu nedenle günlükler taranamıyor. Bu kontrolü kullanmak için dosya günlüğünü etkinleştirin.",learnMore:"Nasıl düzeltilir",fixLabel:"Düzeltme:",occurrences:"{{times}}× görüldü — son {{lastSeen}}'de",category:{layer8:"Bunu düzeltebilirsiniz",environment:"Ortam",bug:"Lütfen bunu bildirin"},signature:{"ftp-auth-rejected":{name:"Yazıcı erişim kodunu reddetti",cause:"Yazıcı dosya aktarım girişini reddetti. Erişim kodu yanlış veya Geliştirici Modu açılıp kapatıldıktan sonra değişti.",fix:"Erişim kodunu yazıcı ekranından (LAN ayarları) yeniden kopyalayın ve Bambuddy'deki yazıcının ayarlarında güncelleyin."},"ftp-connection-timeout":{name:"Dosya aktarım bağlantısı zaman aşımına uğradı",cause:"Bambuddy yazıcının dosya aktarım portuna (FTPS 990) erişemedi. Port engellendi veya yazıcı kapalı ya da başka bir alt ağda.",fix:"Bambuddy ile yazıcı arasında hiçbir şeyin port 990'ı engellemediğinden ve her ikisinin de aynı ağda olduğundan emin olun."},"ftp-ssl-error":{name:"Güvenli dosya aktarım el sıkışması başarısız",cause:"Yazıcının dosya aktarım sunucusuyla TLS el sıkışması başarısız oldu. Bu genellikle bir güvenlik duvarı veya eski yazıcı firmware'idir.",fix:"Yazıcı firmware'ini güncelleyin ve port 990'daki bağlantıyı hiçbir güvenlik duvarı veya proxy'nin engellemediğini kontrol edin."},"mqtt-connection-flapping":{name:"Yazıcı bağlantısı sürekli düşüyor",cause:"Kontrol bağlantısı (MQTT 8883) tekrar tekrar bağlantısı kesiliyor ve yeniden bağlanıyor — genellikle zayıf bir ağ yolu veya kısmen engellenmiş bir port.",fix:"Yazıcıdaki Wi-Fi sinyalini kontrol edin, kablolu bağlantı tercih edin ve port 8883'ün güvenilir bir şekilde erişilebilir olduğundan emin olun."},"camera-connection-refused":{name:"Kamera akışına erişilemez",cause:"Canlı kameraya RTSPS 322 portunda erişilemedi. Port engellendi veya yazıcıda kamera veya LAN canlı görünümü kapalı.",fix:"Yazıcıda kamerayı ve LAN canlı görünümünü etkinleştirin ve port 322'nin engellenmediğinden emin olun. Bu, baskıyı etkilemez."},"database-locked":{name:"Veritabanı yazma çekişmesi",cause:'SQLite veritabanı yük altında "veritabanı kilitli" hatalarıyla karşılaşıyor — aynı anda birkaç yazıcı çalıştırırken yaygındır.',fix:"Bambuddy'yi harici bir PostgreSQL veritabanına geçirin. Dokümantasyondaki PostgreSQL kılavuzuna bakın."}}},vpDiagnostic:{title:"Kurulum kontrolü — {{name}}",runButton:"Kurulum kontrolünü çalıştır",running:"Kurulum kontrolü çalışıyor...",runFailed:"Kurulum kontrolü çalıştırılamadı: {{error}}",retry:"Tekrar çalıştır",overall:{ok:"Tüm kontroller geçti — bu sanal yazıcı doğru şekilde kurulmuş.",warnings:"Sanal yazıcı çalışmalı, ancak bazı şeyler dikkat gerektiriyor.",problems:"Dilimleyicinin bu sanal yazıcıyı neden göremediğini veya kullanamadığını açıklayan sorunlar bulundu."},check:{enabled:{title:"Sanal yazıcı etkin",fail:"Bu sanal yazıcı kapatılmış. Keşfedilebilir hale getirmek için açın."},running:{title:"Servisler çalışıyor",fail:"Sanal yazıcı etkin ancak servisleri çalışmıyor. Bambuddy günlüğünü kontrol edin — bir bind IP çakışması veya bir izin hatası genellikle onları durdurur."},bind_interface:{title:"Bind ağ arayüzü",fail:"Bind arayüzü ayarlanmamış veya artık bu ana bilgisayarda mevcut değil. Bind Arayüzü açılır menüsünde mevcut bir arayüz seçin."},access_code:{title:"Erişim kodu ayarlandı",fail:"Erişim kodu ayarlanmamış. Dilimleyiciye burada ayarladığınız aynı 8 karakterli erişim kodunun verilmesi gerekir."},target_printer:{title:"Hedef yazıcı",fail:"Hedef yazıcı seçilmemiş. Proxy modu iletmek için gerçek bir yazıcıya ihtiyaç duyar.",warn:"Hedef yazıcı şu anda çevrimdışı — yeniden bağlandığında proxy devam edecek."},port_ftps:{title:"Dosya yükleme servisi (port {{port}})",fail:"Bind IP'sinin {{port}} portunda hiçbir şey dinlemiyor, bu nedenle dilimleyici dosya yükleyemez. Bu arayüzde bir port çakışması genellikle nedendir."},port_mqtt:{title:"Kontrol servisi (port {{port}})",fail:"Bind IP'sinin {{port}} portunda hiçbir şey dinlemiyor, bu nedenle dilimleyici bağlanamaz veya durum gösteremez."},port_bind:{title:"Keşif servisi (port {{port}})",fail:"Bind IP'sinin {{port}} portunda hiçbir şey dinlemiyor, bu nedenle dilimleyicinin keşif el sıkışması başarısız oluyor."},certificate:{title:"TLS sertifikası",pass:"Sertifika hazır. Bambuddy CA sertifikasının (yukarıda) dilimleyicinizin güven deposuna içe aktarıldığından emin olun.",fail:"Bu sanal yazıcı için TLS sertifikası eksik. Bambuddy veri dizininin yazılabilir olduğunu kontrol edin."}}},bugReport:{title:"Hata Bildir",description:"Açıklama",descriptionPlaceholder:"Ne ters gitti? Lütfen sorunu tanımlayın...",email:"E-posta (isteğe bağlı)",emailPlaceholder:"sizin@email.com",emailPrivacy:"Sağlanırsa, e-postanız GitHub sorunundaki daraltılmış bir bölümde dahil edilecek, böylece bakımcı takip edebilir.",screenshot:"Ekran Görüntüsü",uploadOrPaste:"Bir görüntü yükleyin, yapıştırın veya sürükleyin",dataCollectedSummary:"Rapora hangi veriler dahil edilir?",dataIncluded:"Dahil:",dataIncludedList:"Uygulama sürümü, OS, mimari, Python sürümü, veritabanı istatistikleri (yalnızca sayılar), yazıcı modelleri, nozul sayıları, firmware sürümleri, bağlantı durumu, entegrasyon durumu (Spoolman, MQTT, HA), hassas olmayan ayarlar, ağ arayüzü sayısı, Docker ayrıntıları, bağımlılık sürümleri.",dataNeverIncluded:"Asla dahil edilmez:",dataNeverIncludedList:"Yazıcı adları, seri numaraları, erişim kodları, parolalar, IP adresleri, e-posta adresleri, API anahtarları, belirteçler, webhook URL'leri, ana bilgisayar adları veya kullanıcı adları.",submit:"Gönder",startLogging:"Hata Ayıklama Kaydını Başlat",stepEnableLogging:"Hata ayıklama kaydı etkin",stepReproduce:"Sorunu şimdi yeniden oluşturun",stepStopLogging:"Durdur ve raporu gönder",stopAndSubmit:"Durdur ve Gönder",maxDuration:"{{minutes}} dk sonra otomatik durur",stoppingLogs:"Günlükler toplanıyor ve gönderiliyor...",submitting:"Hata raporu gönderiliyor...",submittingStepConnection:"Yazıcı bağlantı kontrolleri çalıştırılıyor",submittingStepVirtualPrinters:"Sanal yazıcı kurulum kontrolleri çalıştırılıyor",submittingStepLogScan:"Son günlüklerde bilinen sorunlar taranıyor",submittingStepSubmit:"Rapor GitHub'a gönderiliyor",submitSuccess:"Hata raporu başarıyla gönderildi!",submitFailed:"Hata raporu gönderilemedi",diagnosticChecking:"Yazıcı bağlantıları kontrol ediliyor...",diagnosticHealthy:"Bağlantı kontrolü başarılı — yazıcılarınızda sorun bulunamadı.",diagnosticSummary:"{{total}} yazıcıdan {{problems}} tanesinde bağlantı sorunu var",diagnosticIntro:"Bir veya daha fazla yazıcının sorununuza neden olabilecek bir bağlantı sorunu var. Düzeltmeyi görmek için aşağıda bir yazıcıyı genişletin — bunu çözmek, hata raporu olmadan sorunu çözebilir. Yine de aşağıda bir rapor gönderebilirsiniz.",logHealthSummary:"Günlüklerinizde bilinen sorunlar bulundu",logHealthIntro:"Son günlükler bilinen sorunlarla eşleşiyor. Aşağıdaki düzeltmeleri kontrol edin — bunları çözmek, hata raporu olmadan sorununuzu çözebilir. Yine de aşağıda bir rapor gönderebilirsiniz.",thankYou:"Teşekkürler!",submitted:"Hata raporunuz gönderildi.",viewIssue:"Sorunu Görüntüle",unexpectedError:"Beklenmedik bir hata oluştu"},failureDetection:{title:"AI Başarısızlık Algılama",description:"Baskıları kendi barındırılan bir Obico ML API ile izle ve algılanan başarısızlıklara otomatik olarak yanıt ver.",mlUrl:"Obico ML API URL'si",mlUrlHint:"Kendi barındırılan Obico ml_api konteynerinizin temel URL'si (örn. http://192.168.1.10:3333).",test:"Test",testSuccess:"ML API erişilebilir ve sağlıklı.",testFailed:"ML API'ye erişilemedi.",sensitivity:"Hassasiyet",sensitivityLow:"Düşük (daha az yanlış pozitif)",sensitivityMedium:"Orta (dengeli)",sensitivityHigh:"Yüksek (erken algıla, daha fazla yanlış pozitif)",sensitivityHint:"Uyarıları ve başarısızlıkları tetikleyen güven eşiklerini ayarlar.",action:"Algılanan başarısızlıkta eylem",actionNotify:"Yalnızca bildir",actionPause:"Baskıyı duraklat",actionPauseOff:"Duraklat ve gücü kes",pollInterval:"Sorgulama aralığı (saniye)",pollIntervalHint:"Baskı yaparken her yazıcının ne sıklıkta kontrol edileceği. Minimum 5sn, maksimum 120sn.",externalUrlMissing:"Harici URL ayarlanmamış.",externalUrlHint:"ML API, kamera anlık görüntüsünü URL üzerinden alır. ML API konteyneri Bambuddy'ye erişebilsin diye Genel ayarlarda Harici URL'yi ayarlayın.",perPrinterTitle:"İzlenen Yazıcılar",perPrinterHint:"Algılama servisinin hangi yazıcıları izleyeceğini seçin.",monitorAll:"Tüm bağlı yazıcıları izle",statusTitle:"Durum",serviceRunning:"Servis çalışıyor",thresholds:"Düşük / Yüksek eşikler",activePrinters:"Aktif baskılar",noActivePrints:"Şu anda çalışan baskı yok.",historyTitle:"Son Algılamalar",noHistory:"Henüz algılama yok."},makerworld:{title:"MakerWorld",description:"Bambu Handy uygulamasına gitmeden — doğrudan Bambuddy'den içe aktarmak ve yazdırmak için bir MakerWorld model URL'si yapıştırın.",pasteUrlHeader:"MakerWorld'den İçe Aktar",pasteUrlPlaceholder:"https://makerworld.com/en/models/… veya herhangi bir MakerWorld bağlantısını yapıştırın",resolveButton:"Çöz",signInRequiredTitle:"İndirme için Bambu Cloud girişi gerekli",signInRequiredBody:"Model ayrıntılarına anonim olarak göz atabilirsiniz, ancak MakerWorld 3MF dosyalarını indirmek için bir Bambu Cloud hesabı gerektirir.",openCloudSettings:"Bulut ayarlarını aç",untitledModel:"Adsız model",byCreator:"{{name}} tarafından",downloadsCount:"{{count}} indirme",licensePrefix:"Lisans",alreadyImported:"Zaten kütüphanede",openOnMakerworld:"MakerWorld'de aç",alreadyInLibrary:"Bu model zaten kütüphanenizde — Dosya Yöneticisi → MakerWorld'de bulun",importSuccess:"{{filename}} içe aktarıldı — Dosya Yöneticisi → MakerWorld'e kaydedildi",platesHeader:"Plakalar ({{count}})",plateDefaultName:"Plaka {{n}}",materialCount:"{{count}} filament",amsRequired:"AMS gerekli",slicedFor:"{{printer}} için dilimlendi",alsoCompatible:"Ayrıca uyumlu olarak işaretlendi: {{printers}}",importToLibrary:"Kaydet",sliceIn:"Kaydet ve {{slicer}}'de Dilimle",disclaimer:"MakerWorld entegrasyonu topluluk tarafından belgelenen API uç noktalarını kullanır. Bambuddy, MakerWorld veya Bambu Lab ile ilişkili veya onaylı değildir.",lastImportSuccess:"Kütüphanenize içe aktarıldı",lastImportAlreadyInLibrary:"Zaten kütüphanenizde",viewInLibrary:"Dosya Yöneticisinde Görüntüle",openInBambuStudio:"Bambu Studio'da Aç",openInOrcaSlicer:"OrcaSlicer'da Aç",importTo:"Dosya yöneticisine içe aktar",recentImportsHeader:"Son içe aktarımlar",phaseResolving:"Çözülüyor",phaseDownloading:"İndiriliyor",folderAuto:"MakerWorld (varsayılan)",importAll:"Tümünü içe aktar",importAllProgress:"{{current}}/{{total}} içe aktarılıyor",openGallery:"Görüntü galerisini aç",galleryPrev:"Önceki görüntü",galleryNext:"Sonraki görüntü",deleteImport:"Kütüphaneden kaldır",importDeleting:"Kaldırılıyor…",importDeleted:"Kütüphaneden kaldırıldı",confirmDelete:"{{filename}} kütüphaneden kaldırılsın mı? Bu, yerel dosyayı siler ancak plaka MakerWorld'den yeniden içe aktarılabilir.",errors:{resolveFailed:"O MakerWorld URL'si çözülemedi.",downloadFailed:"İndirme başarısız. Lütfen tekrar deneyin.",deleteFailed:"Dosya kütüphaneden kaldırılamadı."}},gcodeViewer:{back:"Geri",backToArchives:"Baskı Arşivlerine Dön",backToFiles:"Dosya Yöneticisine Dön"},libraryTrash:{title:"Çöp Kutusu",headerButton:"Çöp",headerTooltip:"Çöpe taşınan dosyaları görüntüle",backToFiles:"Dosya Yöneticisine Dön",subtitleAdmin:"Silinen dosyalar burada {{days}} gün kalır, ardından otomatik silinir. Bu görünüm tüm kullanıcılar için çöpteki dosyaları gösterir.",subtitleUser:"Silinen dosyalar burada {{days}} gün kalır, ardından otomatik silinir.",loading:"Çöp yükleniyor…",loadError:"Çöp yüklenemedi.",empty:"Çöp boş.",summary:"{{count}} dosya · {{size}}",emptyTrash:"Çöpü boşalt",restore:"Geri Yükle",purgeNow:"Şimdi sil",autoPurgeIn:"{{when}} içinde otomatik silinir",days:"gün",retentionLabel:"Otomatik sil",selectAll:"Tümünü seç",selectOne:"{{filename}} seç",selectionCount:"{{count}} seçildi",bulkRestore:"Seçilenleri geri yükle",bulkPurge:"Seçilenleri sil",col:{filename:"Dosya",folder:"Klasör",size:"Boyut",deleted:"Çöpe taşındı",autoPurge:"Otomatik silinir",owner:"Sahip",actions:"İşlemler"},confirm:{purgeTitle:"Kalıcı olarak silinsin mi?",purgeBody:"{{filename}} diskten silinecek ve geri yüklenemeyecek.",emptyTitle:"Çöp boşaltılsın mı?",emptyBody:"Tüm {{count}} dosya diskten silinecek. Bu geri alınamaz.",bulkPurgeTitle:"Seçili dosyalar kalıcı olarak silinsin mi?",bulkPurgeBody:"Seçili {{count}} dosya diskten silinecek ve geri yüklenemeyecek.",cta:"Kalıcı olarak sil"},toast:{restored:"Dosya geri yüklendi.",restoreFailed:"Dosya geri yüklenemedi.",purged:"Dosya kalıcı olarak silindi.",purgeFailed:"Dosya silinemedi.",emptied:"{{count}} dosya çöpten silindi.",emptyFailed:"Çöp boşaltılamadı.",retentionSaved:"Otomatik silme {{days}} gün olarak ayarlandı.",retentionFailed:"Saklama ayarı kaydedilemedi.",bulkRestored:"{{count}} dosya geri yüklendi.",bulkPurged:"{{count}} dosya silindi."}},libraryPurge:{title:"Eski dosyaları temizle",headerButton:"Eskileri temizle",headerTooltip:"Eski dosyaları toplu olarak çöpe taşı",description:"Kütüphanenizden eski dosyaları tek seferde temizleyin. Baskı geçmişi olan dosyalar son baskı tarihlerine göre, hiç yazdırılmamış dosyalar yükleme tarihlerine göre yaşlandırılır.",ageLabel:"Şundan eski dosyaları taşı",days:"gün",includeNeverPrinted:"Hiç yazdırılmamış dosyaları dahil et",effectsTitle:"Temizle'ye tıkladığınızda ne olur",effect1:"Eşleşen dosyalar Çöp'e taşınır — henüz diskten silinmezler.",effect2:"Saklama penceresi sona erene kadar Çöp'ten herhangi bir zamanda geri yükleyebilirsiniz.",effect3:"Saklama sonrası, çöp süpürücü onları kalıcı olarak diskten kaldırır.",effect4:"Harici (bağlı) klasörlerdeki dosyalar atlanır — Bambuddy asla sahibi olmadığı bayt'ları silmez.",previewLoading:"Kaç dosyanın eşleştiği kontrol ediliyor…",previewFailed:"Temizleme önizlenemedi.",previewSummary:"{{count}} dosya · {{size}} çöpe taşınacak",andMore:"…ve {{count}} daha",warning:"Çöpe taşınan dosyalar saklama penceresi sona erene kadar depolama alanını kullanmaya devam eder. Diski hemen boşaltmak için sonradan Çöp'ü boşaltın.",confirmCta:"{{count}} dosyayı çöpe taşı",purging:"Çöpe taşınıyor…",toast:{success:"{{count}} dosya çöpe taşındı.",failed:"Dosyalar temizlenemedi."}},libraryAutoPurge:{enableLabel:"Eski dosyaları otomatik temizle",enableDescription:"Yönetici temizliğini günde bir kez çalıştırır. Dosyalar önce Çöp'e gider — hemen silinmezler.",ageLabel:"Şundan eski dosyaları otomatik temizle",ageDescription:"Minimum 7 gün, maksimum 10 yıl. Manuel Temizle düğmesiyle aynı yaş kuralını kullanır.",days:"gün",includeNeverPrinted:"Hiç yazdırılmamış dosyaları dahil et",saveFailed:"Otomatik temizleme ayarları kaydedilemedi."},archivePurge:{headerButton:"Eskileri temizle",headerTooltip:"Eski arşivleri toplu olarak sil",title:"Eski arşivleri temizle",description:"Eski baskı geçmişini temizleyin. Her arşiv en son baskı tamamlamasına göre yaşlandırılır — bir arşivi yeniden yazdırmak yaşını yeniler, bu nedenle aktif çalışma asla temizlenmez.",ageLabel:"Son şu kadar günde yazdırılmamış arşivleri sil",days:"gün",effectsTitle:"Temizle'ye tıkladığınızda ne olur",effect1:"Eşleşen her arşiv listelerden gizlenir ve dosyaları diskten kaldırılır (3MF, küçük resim, zaman atlamalı video, kaynak 3MF, F3D tasarım dosyası, fotoğraflar).",effect2:"Arşiv satırı veritabanında kalır, böylece Hızlı İstatistikler filament, süre, maliyet ve enerji katkısını korur — tek arşiv silme varsayılanı ile aynı.",effect3:'Hızlı İstatistik katkısını da kaldırmak için aşağıdaki "Ayrıca istatistiklerden kaldır"ı işaretleyin (tek arşiv silme seçeneğiyle eşleşir). O yol geri alınamaz.',effect4:"Bir arşivi yeniden yazdırmak yaş saatini yeniler, bu nedenle hâlâ kullandığınız arşivler güvendedir.",purgeStatsLabel:"Ayrıca istatistiklerden kaldır",purgeStatsHint:"Eşleşen arşivleri Hızlı İstatistiklerden (filament, süre, maliyet, enerji) düşürür. Bu olmadan, Hızlı İstatistikler her katkıyı korur ve yalnızca dosyalar diskten ayrılır.",previewLoading:"Kaç arşivin eşleştiği kontrol ediliyor…",previewFailed:"Temizleme önizlenemedi.",previewSummary:"{{count}} arşiv · {{size}} kaldırılacak",andMore:"…ve {{count}} daha",warning:"Dosyalar diskten kaldırılır ve geri yüklenemez. Devam etmeden önce saklamak istediğiniz her şeyi indirin veya favoriye ekleyin.",confirmCta:"{{count}} arşivi kaldır",purging:"Kaldırılıyor…",toast:{success:"{{count}} arşiv kaldırıldı.",failed:"Arşivler temizlenemedi."}},archiveAutoPurge:{enableLabel:"Eski arşivleri otomatik temizle",enableDescription:"Günde bir kez, eşik içinde yazdırılmamışsa arşivleri listelerden gizler ve dosyalarını diskten kaldırır. Bir arşivi yeniden yazdırmak saati sıfırlar.",ageLabel:"Son şu kadar günde yazdırılmamış arşivleri otomatik sil",ageDescription:"Minimum 7 gün, maksimum 10 yıl. En son baskı tamamlamasına göre — bir arşivi yeniden yazdırmak yaşını yeniler. 3MF, küçük resim, zaman atlamalı video, kaynak 3MF, F3D ve fotoğrafları kaldırır.",days:"gün",purgeStatsLabel:"Ayrıca istatistiklerden kaldır",purgeStatsDescription:"Etkinleştirildiğinde, günlük süpürücü her temizlenen arşivi de Hızlı İstatistiklerden (filament, süre, maliyet, enerji) düşürür. Varsayılan kapalı — Hızlı İstatistikler katkıyı korur, yalnızca dosyalar diskten ayrılır.",runNow:"Arşivleri şimdi temizle",saveFailed:"Otomatik temizleme ayarları kaydedilemedi."},cameraTokens:{title:"Kamera API Belirteçleri",navTitle:"Kamera API belirteçleri",description:"Kamera akışını Home Assistant, Frigate, kiosklar veya kararlı bir URL'ye ihtiyaç duyan başka herhangi bir araca gömmek için uzun ömürlü belirteçler. Her belirteç yalnızca kamera akışı içindir ve herhangi bir zamanda iptal edilebilir.",loading:"Yükleniyor…",confirmRevoke:{title:"Bu belirteç iptal edilsin mi?",body:'"{{name}}" kullanan herhangi bir cihaz hemen erişimini kaybedecek. Bu geri alınamaz.',cancel:"İptal",confirm:"İptal Et"},create:{title:"Yeni belirteç oluştur",nameLabel:"Belirteç adı",namePlaceholder:"örn. Home Assistant",daysLabel:"Sona erene kadar gün",submit:"Oluştur",hint:"Maksimum ömür 365 gün. Belirteç değeri oluşturmada yalnızca bir kez gösterilir — şimdi kopyalayın."},created:{title:"Belirteç oluşturuldu — şimdi kopyalayın",warning:"Bu, bu belirtecin görünür olacağı tek seferdir. Bu iletişim kutusunu kapattıktan sonra onu bir daha asla görüntüleyemezsiniz.",copy:"Kopyala",dismiss:"Kaydettim"},list:{myTitle:"Belirteçlerim",allTitle:"Tüm kullanıcılar (yönetici görünümü)",empty:"Henüz belirteç yok.",name:"Ad",owner:"Sahip",prefix:"Önek",created:"Oluşturuldu",expires:"Sona Erer",lastUsed:"Son kullanım",revoke:"İptal Et",expired:"Süresi Doldu"},toast:{created:"Belirteç oluşturuldu",createFailed:"Belirteç oluşturulamadı",revoked:"Belirteç iptal edildi",revokeFailed:"Belirteç iptal edilemedi",loadFailed:"Belirteçler yüklenemedi",copied:"Panoya kopyalandı",copyFailed:"Kopyalama başarısız — manuel olarak seçip kopyalayın"}},forecast:{title:"Tahmin",noSpools:"Aktif makara bulunamadı. Tahmin verisini görmek için envanterinize makara ekleyin.",noUsageData:"Kullanım verisi mevcut değil — stok zaman çizelgesi öngörülemiyor.",sku:"SKU",material:"Malzeme",stock:"Stok",dailyRate:"Oran",daysLeft:"Kalan Gün",emptyBy:"Şu Tarihte Boş",reorderBy:"Şu Tarihte Sipariş",actions:"İşlemler",trend:"Trend",estimated:"Tahmini",noData:"Veri yok",timeframe:"Zaman Aralığı",chartTitle:"Öngörülen Stok — İlk 5 Malzeme",dashedLinesROP:"Kesik çizgiler = yeniden sipariş noktaları",stockLevel:"Stok Seviyesi",reorderPoint:"Yeniden Sipariş Noktası",safetyMargin:"Güvenlik Marjı",trendLegend:"Trend (geçmiş tabanlı, %95 servis seviyesi)",estimatedLegend:"Tahmini (ağırlık farkı)",noDataLegend:"Veri yok",ropLabel:"ROP",ssLabel:"SS",safetyStockLegend:"Güvenlik stoku",stockArrivalLegend:"Stok varışı",stockoutLegend:"Stok tükenmesi",alertCount_one:"{{count}} uyarı",alertCount_other:"{{count}} uyarı",order:"Sipariş",save:"Kaydet",cancel:"İptal",settingsSaved:"Ayarlar kaydedildi",failedSaveSettings:"Ayarlar kaydedilemedi",globalLeadTimeSaved:"Global teslim süresi kaydedildi",globalLeadTime:"Global teslim süresi",globalLeadTimeHint:"Global teslim süresi tabanı — tüm SKU'lar için yeniden sipariş noktası hesaplamasında kullanılır",skuLeadTimeOverride:"SKU Teslim Süresi Geçersiz Kılma",skuLeadTimeHint:"0 = global teslim süresini kullan. Bu SKU için geçersiz kılmak için >0 ayarlayın.",safetyMarginLabel:"Güvenlik Marjı",effectiveLeadTime:"Etkili Teslim Süresi",effectiveLeadTimeHint:"max(global {{global}}g, SKU {{sku}}g)",reorderPointHint:"d̄ × LT + güvenlik marjı — stok bu seviyeye geldiğinde sipariş ver",safetyMarginHint:"İstatistiksel güvenlik stoku (z=1.65 × σ × √LT) + kullanıcı tanımlı tampon",safetyMarginHintDays:"İstatistiksel güvenlik stokunun üzerine eklenen tampon.{{approx}}",safetyMarginHintDaysApprox:" ≈ mevcut oranda {{g}}g.",safetyMarginHintG:"İstatistiksel güvenlik stokunun üzerine eklenen sabit ağırlık tamponu.{{approx}}",safetyMarginHintGApprox:" ≈ mevcut oranda {{days}}g.",individualSpools:"Bireysel makaralar",labelWeight:"Etiket",spoolCount_one:"{{count}} makara",spoolCount_other:"{{count}} makara",stockBreakRisk:"Stok tükenme riski",stockBreakDetail:"{{days}}g kaldı, teslim süresi {{lt}}g.",stockBreakBefore:"Yenileme öncesi stok tükenmesi",reorderNow:"Şimdi sipariş ver",reorderTriggerPassed:"Tetikleyici tarih {{date}} geçti.",shoppingList:"Alışveriş Listesi",shoppingListItems_one:"({{count}} öğe)",shoppingListItems_other:"({{count}} öğe)",shoppingListEmpty:"Alışveriş listesi boş. Öğe eklemek için herhangi bir satırdaki sepet simgesine tıklayın.",addToCart:"Alışveriş listesine ekle",alertsSnoozed:"Bu SKU için uyarıları sustur",alertsEnabled:"Bu SKU için uyarıları aç",addedToCart:"Alışveriş listesine eklendi",failedAddItem:"Öğe eklenemedi",listView:"Liste",logisticsView:"Lojistik",qty:"Adet",weight:"Ağırlık",leadTime:"Teslim Süresi",expectedRestock:"Beklenen Yenileme",status:"Durum",note:"Not",pending:"Beklemede",purchased:"Satın Alındı",received:"Teslim Alındı",markPurchased:"Satın alındı olarak işaretle",markReceived:"Teslim alındı olarak işaretle — makaraları Stok envanterine ekler",resetToPending:"Beklemeye sıfırla",remove:"Kaldır",clearAll:"Tümünü temizle",downloadCsv:"CSV",addToCartTitle:"Alışveriş Listesine Ekle",byQuantity:"Miktara Göre",byDuration:"Süreye Göre",numberOfSpools:"Makara sayısı",lastHowManyDays:"Kaç gün dayanmalı?",noUsageQty:"Kullanım verisi yok — miktar 1 olarak ayarlandı.",noteOptional:"Not (isteğe bağlı)",notePlaceholder:"örn. X projesi için, acil…",addNSpools_one:"{{count}} makara ekle",addNSpools_other:"{{count}} makara ekle",onArrival:"Varışta",stockBreakIn:"{{days}}g içinde stok tükenmesi.",stockRunsOutBefore:"{{lt}}g teslim süresi dolmadan önce stok tükenir.",atRate:"{{rate}}g/gün oranında size gerekli",moreSpools_one:"{{count}} daha makara",moreSpools_other:"{{count}} daha makara",bridgeGap:"boşluğu kapatmak için.",noReadAccess:"Envanter tahminlerini görüntüleme izniniz yok.",noWriteAccess:"Tahmin ayarlarını değiştirme izniniz yok."}},Ape={en:{translation:xpe},de:{translation:ype},es:{translation:vpe},fr:{translation:wpe},ja:{translation:Spe},it:{translation:kpe},ko:{translation:_pe},"pt-BR":{translation:Ppe},"zh-CN":{translation:Cpe},"zh-TW":{translation:Npe},tr:{translation:Tpe}};Ao.use(pZ).use(Qme).init({resources:Ape,fallbackLng:"en",supportedLngs:["en","de","es","fr","ja","it","ko","pt-BR","tr","zh-CN","zh-TW"],detection:{order:["localStorage","navigator","htmlTag"],lookupLocalStorage:"bambutrack_language",caches:["localStorage"]},interpolation:{escapeValue:!1},react:{useSuspense:!1}});const o8=[{code:"en",name:"English",nativeName:"English"},{code:"de",name:"German",nativeName:"Deutsch"},{code:"es",name:"Spanish",nativeName:"Español"},{code:"fr",name:"French",nativeName:"Français"},{code:"ja",name:"Japanese",nativeName:"日本語"},{code:"it",name:"Italian",nativeName:"Italiano"},{code:"ko",name:"Korean",nativeName:"한국어"},{code:"pt-BR",name:"Portuguese (Brazil)",nativeName:"Português (Brasil)"},{code:"zh-CN",name:"Chinese (Simplified)",nativeName:"简体中文"},{code:"zh-TW",name:"Chinese (Traditional)",nativeName:"繁體中文"},{code:"tr",name:"Turkish",nativeName:"Türkçe"}];var l8="popstate";function jpe(t={}){function e(n,i){let{pathname:s,search:o,hash:l}=n.location;return $L("",{pathname:s,search:o,hash:l},i.state&&i.state.usr||null,i.state&&i.state.key||"default")}function a(n,i){return typeof i=="string"?i:Rw(i)}return Epe(e,a,null,t)}function On(t,e){if(t===!1||t===null||typeof t>"u")throw new Error(e)}function Cc(t,e){if(!t){typeof console<"u"&&console.warn(e);try{throw new Error(e)}catch{}}}function Mpe(){return Math.random().toString(36).substring(2,10)}function c8(t,e){return{usr:t.state,key:t.key,idx:e}}function $L(t,e,a=null,n){return{pathname:typeof t=="string"?t:t.pathname,search:"",hash:"",...typeof e=="string"?Qy(e):e,state:a,key:e&&e.key||n||Mpe()}}function Rw({pathname:t="/",search:e="",hash:a=""}){return e&&e!=="?"&&(t+=e.charAt(0)==="?"?e:"?"+e),a&&a!=="#"&&(t+=a.charAt(0)==="#"?a:"#"+a),t}function Qy(t){let e={};if(t){let a=t.indexOf("#");a>=0&&(e.hash=t.substring(a),t=t.substring(0,a));let n=t.indexOf("?");n>=0&&(e.search=t.substring(n),t=t.substring(0,n)),t&&(e.pathname=t)}return e}function Epe(t,e,a,n={}){let{window:i=document.defaultView,v5Compat:s=!1}=n,o=i.history,l="POP",c=null,d=u();d==null&&(d=0,o.replaceState({...o.state,idx:d},""));function u(){return(o.state||{idx:null}).idx}function m(){l="POP";let b=u(),x=b==null?null:b-d;d=b,c&&c({action:l,location:v.location,delta:x})}function p(b,x){l="PUSH";let S=$L(v.location,b,x);d=u()+1;let k=c8(S,d),C=v.createHref(S);try{o.pushState(k,"",C)}catch(N){if(N instanceof DOMException&&N.name==="DataCloneError")throw N;i.location.assign(C)}s&&c&&c({action:l,location:v.location,delta:1})}function f(b,x){l="REPLACE";let S=$L(v.location,b,x);d=u();let k=c8(S,d),C=v.createHref(S);o.replaceState(k,"",C),s&&c&&c({action:l,location:v.location,delta:0})}function g(b){return Dpe(b)}let v={get action(){return l},get location(){return t(i,o)},listen(b){if(c)throw new Error("A history only accepts one active listener");return i.addEventListener(l8,m),c=b,()=>{i.removeEventListener(l8,m),c=null}},createHref(b){return e(i,b)},createURL:g,encodeLocation(b){let x=g(b);return{pathname:x.pathname,search:x.search,hash:x.hash}},push:p,replace:f,go(b){return o.go(b)}};return v}function Dpe(t,e=!1){let a="http://localhost";typeof window<"u"&&(a=window.location.origin!=="null"?window.location.origin:window.location.href),On(a,"No window.location.(origin|href) available to create URL");let n=typeof t=="string"?t:Rw(t);return n=n.replace(/ $/,"%20"),!e&&n.startsWith("//")&&(n=a+n),new URL(n,a)}function hZ(t,e,a="/"){return Fpe(t,e,a,!1)}function Fpe(t,e,a,n){let i=typeof e=="string"?Qy(e):e,s=Ym(i.pathname||"/",a);if(s==null)return null;let o=fZ(t);Lpe(o);let l=null;for(let c=0;l==null&&c<o.length;++c){let d=Vpe(s);l=Gpe(o[c],d,n)}return l}function fZ(t,e=[],a=[],n="",i=!1){let s=(o,l,c=i,d)=>{let u={relativePath:d===void 0?o.path||"":d,caseSensitive:o.caseSensitive===!0,childrenIndex:l,route:o};if(u.relativePath.startsWith("/")){if(!u.relativePath.startsWith(n)&&c)return;On(u.relativePath.startsWith(n),`Absolute route path "${u.relativePath}" nested under path "${n}" is not valid. An absolute child route path must start with the combined path of all its parent routes.`),u.relativePath=u.relativePath.slice(n.length)}let m=Im([n,u.relativePath]),p=a.concat(u);o.children&&o.children.length>0&&(On(o.index!==!0,`Index routes must not have child routes. Please remove all child routes from route path "${m}".`),fZ(o.children,e,p,m,c)),!(o.path==null&&!o.index)&&e.push({path:m,score:Hpe(m,o.index),routesMeta:p})};return t.forEach((o,l)=>{if(o.path===""||!o.path?.includes("?"))s(o,l);else for(let c of gZ(o.path))s(o,l,!0,c)}),e}function gZ(t){let e=t.split("/");if(e.length===0)return[];let[a,...n]=e,i=a.endsWith("?"),s=a.replace(/\?$/,"");if(n.length===0)return i?[s,""]:[s];let o=gZ(n.join("/")),l=[];return l.push(...o.map(c=>c===""?s:[s,c].join("/"))),i&&l.push(...o),l.map(c=>t.startsWith("/")&&c===""?"/":c)}function Lpe(t){t.sort((e,a)=>e.score!==a.score?a.score-e.score:qpe(e.routesMeta.map(n=>n.childrenIndex),a.routesMeta.map(n=>n.childrenIndex)))}var Rpe=/^:[\w-]+$/,zpe=3,Ipe=2,Ope=1,Bpe=10,Upe=-2,d8=t=>t==="*";function Hpe(t,e){let a=t.split("/"),n=a.length;return a.some(d8)&&(n+=Upe),e&&(n+=Ipe),a.filter(i=>!d8(i)).reduce((i,s)=>i+(Rpe.test(s)?zpe:s===""?Ope:Bpe),n)}function qpe(t,e){return t.length===e.length&&t.slice(0,-1).every((n,i)=>n===e[i])?t[t.length-1]-e[e.length-1]:0}function Gpe(t,e,a=!1){let{routesMeta:n}=t,i={},s="/",o=[];for(let l=0;l<n.length;++l){let c=n[l],d=l===n.length-1,u=s==="/"?e:e.slice(s.length)||"/",m=nN({path:c.relativePath,caseSensitive:c.caseSensitive,end:d},u),p=c.route;if(!m&&d&&a&&!n[n.length-1].route.index&&(m=nN({path:c.relativePath,caseSensitive:c.caseSensitive,end:!1},u)),!m)return null;Object.assign(i,m.params),o.push({params:i,pathname:Im([s,m.pathname]),pathnameBase:Qpe(Im([s,m.pathnameBase])),route:p}),m.pathnameBase!=="/"&&(s=Im([s,m.pathnameBase]))}return o}function nN(t,e){typeof t=="string"&&(t={path:t,caseSensitive:!1,end:!0});let[a,n]=$pe(t.path,t.caseSensitive,t.end),i=e.match(a);if(!i)return null;let s=i[0],o=s.replace(/(.)\/+$/,"$1"),l=i.slice(1);return{params:n.reduce((d,{paramName:u,isOptional:m},p)=>{if(u==="*"){let g=l[p]||"";o=s.slice(0,s.length-g.length).replace(/(.)\/+$/,"$1")}const f=l[p];return m&&!f?d[u]=void 0:d[u]=(f||"").replace(/%2F/g,"/"),d},{}),pathname:s,pathnameBase:o,pattern:t}}function $pe(t,e=!1,a=!0){Cc(t==="*"||!t.endsWith("*")||t.endsWith("/*"),`Route path "${t}" will be treated as if it were "${t.replace(/\*$/,"/*")}" because the \`*\` character must always follow a \`/\` in the pattern. To get rid of this warning, please change the route path to "${t.replace(/\*$/,"/*")}".`);let n=[],i="^"+t.replace(/\/*\*?$/,"").replace(/^\/*/,"/").replace(/[\\.*+^${}|()[\]]/g,"\\$&").replace(/\/:([\w-]+)(\?)?/g,(o,l,c)=>(n.push({paramName:l,isOptional:c!=null}),c?"/?([^\\/]+)?":"/([^\\/]+)")).replace(/\/([\w-]+)\?(\/|$)/g,"(/$1)?$2");return t.endsWith("*")?(n.push({paramName:"*"}),i+=t==="*"||t==="/*"?"(.*)$":"(?:\\/(.+)|\\/*)$"):a?i+="\\/*$":t!==""&&t!=="/"&&(i+="(?:(?=\\/|$))"),[new RegExp(i,e?void 0:"i"),n]}function Vpe(t){try{return t.split("/").map(e=>decodeURIComponent(e).replace(/\//g,"%2F")).join("/")}catch(e){return Cc(!1,`The URL path "${t}" could not be decoded because it is a malformed URL segment. This is probably due to a bad percent encoding (${e}).`),t}}function Ym(t,e){if(e==="/")return t;if(!t.toLowerCase().startsWith(e.toLowerCase()))return null;let a=e.endsWith("/")?e.length-1:e.length,n=t.charAt(a);return n&&n!=="/"?null:t.slice(a)||"/"}var Wpe=/^(?:[a-z][a-z0-9+.-]*:|\/\/)/i;function Kpe(t,e="/"){let{pathname:a,search:n="",hash:i=""}=typeof t=="string"?Qy(t):t,s;return a?(a=a.replace(/\/\/+/g,"/"),a.startsWith("/")?s=u8(a.substring(1),"/"):s=u8(a,e)):s=e,{pathname:s,search:Xpe(n),hash:Zpe(i)}}function u8(t,e){let a=e.replace(/\/+$/,"").split("/");return t.split("/").forEach(i=>{i===".."?a.length>1&&a.pop():i!=="."&&a.push(i)}),a.length>1?a.join("/"):"/"}function hE(t,e,a,n){return`Cannot include a '${t}' character in a manually specified \`to.${e}\` field [${JSON.stringify(n)}].  Please separate it out to the \`to.${a}\` field. Alternatively you may provide the full path as a string in <Link to="..."> and the router will parse it for you.`}function Ype(t){return t.filter((e,a)=>a===0||e.route.path&&e.route.path.length>0)}function bI(t){let e=Ype(t);return e.map((a,n)=>n===e.length-1?a.pathname:a.pathnameBase)}function xI(t,e,a,n=!1){let i;typeof t=="string"?i=Qy(t):(i={...t},On(!i.pathname||!i.pathname.includes("?"),hE("?","pathname","search",i)),On(!i.pathname||!i.pathname.includes("#"),hE("#","pathname","hash",i)),On(!i.search||!i.search.includes("#"),hE("#","search","hash",i)));let s=t===""||i.pathname==="",o=s?"/":i.pathname,l;if(o==null)l=a;else{let m=e.length-1;if(!n&&o.startsWith("..")){let p=o.split("/");for(;p[0]==="..";)p.shift(),m-=1;i.pathname=p.join("/")}l=m>=0?e[m]:"/"}let c=Kpe(i,l),d=o&&o!=="/"&&o.endsWith("/"),u=(s||o===".")&&a.endsWith("/");return!c.pathname.endsWith("/")&&(d||u)&&(c.pathname+="/"),c}var Im=t=>t.join("/").replace(/\/\/+/g,"/"),Qpe=t=>t.replace(/\/+$/,"").replace(/^\/*/,"/"),Xpe=t=>!t||t==="?"?"":t.startsWith("?")?t:"?"+t,Zpe=t=>!t||t==="#"?"":t.startsWith("#")?t:"#"+t,Jpe=class{constructor(t,e,a,n=!1){this.status=t,this.statusText=e||"",this.internal=n,a instanceof Error?(this.data=a.toString(),this.error=a):this.data=a}};function ehe(t){return t!=null&&typeof t.status=="number"&&typeof t.statusText=="string"&&typeof t.internal=="boolean"&&"data"in t}function the(t){return t.map(e=>e.route.path).filter(Boolean).join("/").replace(/\/\/*/g,"/")||"/"}var bZ=typeof window<"u"&&typeof window.document<"u"&&typeof window.document.createElement<"u";function xZ(t,e){let a=t;if(typeof a!="string"||!Wpe.test(a))return{absoluteURL:void 0,isExternal:!1,to:a};let n=a,i=!1;if(bZ)try{let s=new URL(window.location.href),o=a.startsWith("//")?new URL(s.protocol+a):new URL(a),l=Ym(o.pathname,e);o.origin===s.origin&&l!=null?a=l+o.search+o.hash:i=!0}catch{Cc(!1,`<Link to="${a}"> contains an invalid URL which will probably break when clicked - please update to a valid URL path.`)}return{absoluteURL:n,isExternal:i,to:a}}Object.getOwnPropertyNames(Object.prototype).sort().join("\0");var yZ=["POST","PUT","PATCH","DELETE"];new Set(yZ);var ahe=["GET",...yZ];new Set(ahe);var Xy=y.createContext(null);Xy.displayName="DataRouter";var NT=y.createContext(null);NT.displayName="DataRouterState";var rhe=y.createContext(!1),vZ=y.createContext({isTransitioning:!1});vZ.displayName="ViewTransition";var nhe=y.createContext(new Map);nhe.displayName="Fetchers";var ihe=y.createContext(null);ihe.displayName="Await";var Dl=y.createContext(null);Dl.displayName="Navigation";var MS=y.createContext(null);MS.displayName="Location";var Lc=y.createContext({outlet:null,matches:[],isDataRoute:!1});Lc.displayName="Route";var yI=y.createContext(null);yI.displayName="RouteError";var wZ="REACT_ROUTER_ERROR",she="REDIRECT",ohe="ROUTE_ERROR_RESPONSE";function lhe(t){if(t.startsWith(`${wZ}:${she}:{`))try{let e=JSON.parse(t.slice(28));if(typeof e=="object"&&e&&typeof e.status=="number"&&typeof e.statusText=="string"&&typeof e.location=="string"&&typeof e.reloadDocument=="boolean"&&typeof e.replace=="boolean")return e}catch{}}function che(t){if(t.startsWith(`${wZ}:${ohe}:{`))try{let e=JSON.parse(t.slice(40));if(typeof e=="object"&&e&&typeof e.status=="number"&&typeof e.statusText=="string")return new Jpe(e.status,e.statusText,e.data)}catch{}}function dhe(t,{relative:e}={}){On(Zy(),"useHref() may be used only in the context of a <Router> component.");let{basename:a,navigator:n}=y.useContext(Dl),{hash:i,pathname:s,search:o}=DS(t,{relative:e}),l=s;return a!=="/"&&(l=s==="/"?a:Im([a,s])),n.createHref({pathname:l,search:o,hash:i})}function Zy(){return y.useContext(MS)!=null}function vd(){return On(Zy(),"useLocation() may be used only in the context of a <Router> component."),y.useContext(MS).location}var SZ="You should call navigate() in a React.useEffect(), not when your component is first rendered.";function kZ(t){y.useContext(Dl).static||y.useLayoutEffect(t)}function Ri(){let{isDataRoute:t}=y.useContext(Lc);return t?_he():uhe()}function uhe(){On(Zy(),"useNavigate() may be used only in the context of a <Router> component.");let t=y.useContext(Xy),{basename:e,navigator:a}=y.useContext(Dl),{matches:n}=y.useContext(Lc),{pathname:i}=vd(),s=JSON.stringify(bI(n)),o=y.useRef(!1);return kZ(()=>{o.current=!0}),y.useCallback((c,d={})=>{if(Cc(o.current,SZ),!o.current)return;if(typeof c=="number"){a.go(c);return}let u=xI(c,JSON.parse(s),i,d.relative==="path");t==null&&e!=="/"&&(u.pathname=u.pathname==="/"?e:Im([e,u.pathname])),(d.replace?a.replace:a.push)(u,d.state,d)},[e,a,s,i,t])}var _Z=y.createContext(null);function Jy(){return y.useContext(_Z)}function mhe(t){let e=y.useContext(Lc).outlet;return y.useMemo(()=>e&&y.createElement(_Z.Provider,{value:t},e),[e,t])}function ES(){let{matches:t}=y.useContext(Lc),e=t[t.length-1];return e?e.params:{}}function DS(t,{relative:e}={}){let{matches:a}=y.useContext(Lc),{pathname:n}=vd(),i=JSON.stringify(bI(a));return y.useMemo(()=>xI(t,JSON.parse(i),n,e==="path"),[t,i,n,e])}function phe(t,e){return PZ(t,e)}function PZ(t,e,a,n,i){On(Zy(),"useRoutes() may be used only in the context of a <Router> component.");let{navigator:s}=y.useContext(Dl),{matches:o}=y.useContext(Lc),l=o[o.length-1],c=l?l.params:{},d=l?l.pathname:"/",u=l?l.pathnameBase:"/",m=l&&l.route;{let S=m&&m.path||"";NZ(d,!m||S.endsWith("*")||S.endsWith("*?"),`You rendered descendant <Routes> (or called \`useRoutes()\`) at "${d}" (under <Route path="${S}">) but the parent route path has no trailing "*". This means if you navigate deeper, the parent won't match anymore and therefore the child routes will never render.
diff --git a/static/index.html b/static/index.html
index e8bae081c..fae14762c 100644
--- a/static/index.html
+++ b/static/index.html
@@ -26,7 +26,7 @@
 
     <!-- Splash screens for iOS -->
     <link rel="apple-touch-startup-image" href="/img/android-chrome-512x512.png" />
-    <script type="module" crossorigin src="/assets/index-Dai0-twV.js"></script>
+    <script type="module" crossorigin src="/assets/index-14DWwfbR.js"></script>
     <link rel="stylesheet" crossorigin href="/assets/index-Df3XYvpK.css">
   </head>
   <body>